summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--io-module/mtr.c351
-rw-r--r--io-module/mts-io.c18
-rw-r--r--io-module/mts_io_module.h8
3 files changed, 367 insertions, 10 deletions
diff --git a/io-module/mtr.c b/io-module/mtr.c
index 171c182..e47beae 100644
--- a/io-module/mtr.c
+++ b/io-module/mtr.c
@@ -1199,6 +1199,267 @@ static struct gpio_pin gpio_pins_mtrv1_0_2[] = {
{ },
};
+static struct gpio_pin gpio_pins_mtrv1_0_3[] = {
+ {
+ .name = "ETH_RESET",
+ .pin = {
+ .gpio = AT91_PIN_PC6,
+ .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN, /* without GPIOF_OPEN_DRAIN causes issues with the Micrel KSZ8091RNBCA (RMII) PHY */
+ .label = "eth-reset",
+ },
+ .active_low = 0,
+ },
+ {
+ .name = "DEVICE_RESET",
+ .pin = {
+ .gpio = AT91_PIN_PC4,
+ .flags = GPIOF_IN,
+ .label = "reset",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LS_LED",
+ .pin = {
+ .gpio = AT91_PIN_PC4,
+#if LED_LS_CONTROLLABLE
+ .flags = GPIOF_OUT_INIT_HIGH,
+#else
+ .flags = GPIOF_IN,
+#endif
+ .label = "led-ls",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "STATUS_LED",
+ .pin = {
+ .gpio = AT91_PIN_PC21,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led-status",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LED3",
+ .pin = {
+ .gpio = AT91_PIN_PC15,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "led-wifi",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LED3",
+ .pin = {
+ .gpio = AT91_PIN_PC15,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "led-b",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LED4",
+ .pin = {
+ .gpio = AT91_PIN_PC20,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "led-cd",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LED4",
+ .pin = {
+ .gpio = AT91_PIN_PC20,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "led-c",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LED6",
+ .pin = {
+ .gpio = AT91_PIN_PC19,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "led-sig1",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LED6",
+ .pin = {
+ .gpio = AT91_PIN_PC19,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "led-d",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LED7",
+ .pin = {
+ .gpio = AT91_PIN_PC18,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "led-sig2",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LED7",
+ .pin = {
+ .gpio = AT91_PIN_PC18,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "led-e",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LED8",
+ .pin = {
+ .gpio = AT91_PIN_PC17,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "led-sig3",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "LED8",
+ .pin = {
+ .gpio = AT91_PIN_PC17,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "led-f",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "RI_B",
+ .pin = {
+ .gpio = AT91_PIN_PC25,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "extserial-ri",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "DTR_B",
+ .pin = {
+ .gpio = AT91_PIN_PC26,
+ .flags = GPIOF_IN,
+ .label = "extserial-dtr",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "DSR_B",
+ .pin = {
+ .gpio = AT91_PIN_PC27,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "extserial-dsr",
+ },
+ .active_low = 1,
+ },
+ {
+ .name = "DCD_B",
+ .pin = {
+ .gpio = AT91_PIN_PC28,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "extserial-dcd",
+ },
+ .active_low = 1,
+ },
+
+ // The difference between MTRv1_0_0 and MTRv1_0_1 starts here
+ {
+ .name = "WIFI_BT_ULPWKUP",
+ .pin = {
+ .gpio = AT91_PIN_PA0,
+ .flags = GPIOF_IN,
+ .label = "wifi-bt-ulpwkup",
+ }
+ },
+ {
+ .name = "WIFI_BT_LPWKUP",
+ .pin = {
+ .gpio = AT91_PIN_PA6,
+ .flags = GPIOF_IN,
+ .label = "wifi-bt-lpwkup",
+ }
+ },
+ {
+ .name = "WIFI_BT_INT",
+ .pin = {
+ .gpio = AT91_PIN_PB11,
+ .flags = GPIOF_IN,
+ .label = "wifi-bt-int",
+ }
+ },
+ {
+ .name = "WIFI_BT_RESET",
+ .pin = {
+ .gpio = AT91_PIN_PD14,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "wifi-bt-reset",
+ }
+ },
+ {
+ .name = "WIFI_BT_LPMODE",
+ .pin = {
+ .gpio = AT91_PIN_PD20,
+ .flags = GPIOF_IN,
+ .label = "wifi-bt-lpmode",
+ }
+ },
+ {
+ .name = "GNSS_RESET",
+ .pin = {
+ .gpio = AT91_PIN_PD15,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "gnss-reset",
+ }
+ },
+ {
+ .name = "SECURE_RESET",
+ .pin = {
+ .gpio = AT91_PIN_PD16,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "secure-reset",
+ }
+ },
+ {
+ .name = "MTQ_RESET",
+ .pin = {
+ .gpio = AT91_PIN_PD17,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "radio-reset",
+ }
+ },
+ {
+ .name = "USBHUB_RESET",
+ .pin = {
+ .gpio = AT91_PIN_PD18,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "usbhub-reset",
+ }
+ },
+ {
+ .name = "GNSS_INT",
+ .pin = {
+ .gpio = AT91_PIN_PD19,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "gnss-int",
+ }
+ },
+ // Difference with mtrv1_0_1 starts here
+ {
+ .name = "RADIO_WM_LK_M", // WM LINK Monitor for CAT M
+ .pin = {
+ .gpio = AT91_PIN_PA14,
+ .flags = GPIOF_IN,
+ .label = "radio-wm-lk-m",
+ }
+ },
+
+ { },
+};
/* radio control (power/reset) for mtr */
static int radio_off_mtr(void)
@@ -1323,6 +1584,28 @@ static int radio_reset_mtr(void)
return 0;
}
+static int radio_reset_mtr_mtq(void)
+{
+ struct gpio_pin *rst_pin = gpio_pin_by_attr_name("radio-reset");
+
+ if (!rst_pin) {
+ return -ENODEV;
+ }
+
+ // drive reset pin low for 500ms
+ gpio_set_value(rst_pin->pin.gpio, 0);
+
+ msleep(500);
+
+ // set pin high
+ gpio_set_value(rst_pin->pin.gpio, 1);
+
+ // wait for 2 sec before toggling on/off pin
+ msleep(2000);
+
+ return 0;
+}
+
static ssize_t mts_attr_store_radio_power_mtr(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
@@ -1388,7 +1671,15 @@ static ssize_t mts_attr_store_radio_reset_mtr(struct device *dev,
mutex_lock(&mts_io_mutex);
- err = radio_reset_mtr();
+ if (mts_hw_version == MTRV1_0_3)
+ {
+ err = radio_reset_mtr_mtq();
+ }
+ else
+ {
+ err = radio_reset_mtr();
+ }
+
mutex_unlock(&mts_io_mutex);
@@ -1643,3 +1934,61 @@ static struct attribute *mtrv1_0_2_platform_attributes[] = {
static struct attribute_group mtrv1_0_2_platform_attribute_group = {
.attrs = mtrv1_0_2_platform_attributes
};
+
+
+static struct attribute *mtrv1_0_3_platform_attributes[] = {
+ &dev_attr_vendor_id.attr,
+ &dev_attr_product_id.attr,
+ &dev_attr_device_id.attr,
+ &dev_attr_uuid.attr,
+ &dev_attr_hw_version.attr,
+ &dev_attr_imei.attr,
+ &dev_attr_eth_mac.attr,
+ &dev_attr_has_radio.attr,
+ &dev_attr_wifi_mac_mtr.attr,
+
+ &dev_attr_reset.attr,
+ &dev_attr_reset_monitor.attr,
+ &dev_attr_reset_monitor_intervals.attr,
+ &dev_attr_radio_reset_mtr.attr,
+
+ &dev_attr_radio_reset_backoffs.attr,
+ &dev_attr_radio_reset_backoff_index.attr,
+ &dev_attr_radio_reset_backoff_seconds.attr,
+
+ &dev_attr_extserial_ri_gpio_mtr.attr,
+ &dev_attr_extserial_dtr_mtr.attr,
+ &dev_attr_extserial_dsr_gpio_mtr.attr,
+ &dev_attr_extserial_dcd_gpio_mtr.attr,
+
+ &dev_attr_eth_reset_mtr.attr,
+ &dev_attr_wifi_bt_lpwkup_mtr.attr,
+ &dev_attr_wifi_bt_ulpwkup_mtr.attr,
+ &dev_attr_wifi_bt_reset_mtr.attr,
+ &dev_attr_wifi_bt_lpmode_mtr.attr,
+ &dev_attr_wifi_bt_int_mtr.attr,
+ &dev_attr_gnss_reset_mtr.attr,
+ &dev_attr_usbhub_reset_mtr.attr,
+ &dev_attr_gnss_int_mtr.attr,
+
+ &dev_attr_led_status.attr,
+ &dev_attr_led_cd_gpio.attr,
+ &dev_attr_led_sig1_gpio.attr,
+ &dev_attr_led_sig2_gpio.attr,
+ &dev_attr_led_sig3_gpio.attr,
+ &dev_attr_led_wifi_gpio_mtr.attr,
+
+ &dev_attr_led_b_gpio.attr,
+ &dev_attr_led_c_gpio.attr,
+ &dev_attr_led_d_gpio.attr,
+ &dev_attr_led_e_gpio.attr,
+ &dev_attr_led_f_gpio_mtr.attr,
+
+ &dev_attr_radio_wm_lk_m.attr, // CAT M feature? Is this still there on the MTQ with Quectel?
+
+ NULL,
+};
+
+static struct attribute_group mtrv1_0_3_platform_attribute_group = {
+ .attrs = mtrv1_0_3_platform_attributes
+};
diff --git a/io-module/mts-io.c b/io-module/mts-io.c
index a17ff3c..0ea7e45 100644
--- a/io-module/mts-io.c
+++ b/io-module/mts-io.c
@@ -668,7 +668,7 @@ mts_id_eeprom_load(void)
}
attr_group = &mtcap_0_0_platform_attribute_group;
gpio_pins = gpio_pins_mtcap_0_0;
- set_buttons(default_buttons);
+ set_buttons(default_buttons);
if (DEVICE_CAPA(id_eeprom.capa, CAPA_LORA)) {
attr_group_lora = &mtcap_0_0_lora_attribute_group;
}
@@ -676,33 +676,39 @@ mts_id_eeprom_load(void)
} else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTR_0_0, strlen(HW_VERSION_MTR_0_0)) == 0) {
attr_group = &mtr_platform_attribute_group;
gpio_pins = gpio_pins_mtr_0_0;
- set_buttons(default_buttons);
+ set_buttons(default_buttons);
mts_hw_version = MTR_0_0;
log_info("detected board %s", HW_VERSION_MTR_0_0);
} else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTR_0_1, strlen(HW_VERSION_MTR_0_1)) == 0) {
attr_group = &mtr_platform_attribute_group;
gpio_pins = gpio_pins_mtr_0_1;
- set_buttons(default_buttons);
+ set_buttons(default_buttons);
mts_hw_version = MTR_0_1;
log_info("detected board %s", HW_VERSION_MTR_0_1);
} else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTRV1_0_0, strlen(HW_VERSION_MTRV1_0_0)) == 0) {
attr_group = &mtr_platform_attribute_group;
gpio_pins = gpio_pins_mtrv1_0_0;
- set_buttons(default_buttons);
+ set_buttons(default_buttons);
mts_hw_version = MTRV1_0_0;
log_info("detected board %s", HW_VERSION_MTRV1_0_0);
} else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTRV1_0_1, strlen(HW_VERSION_MTRV1_0_1)) == 0) {
attr_group = &mtrv1_0_1_platform_attribute_group;
gpio_pins = gpio_pins_mtrv1_0_1;
- set_buttons(default_buttons);
+ set_buttons(default_buttons);
mts_hw_version = MTRV1_0_1;
log_info("detected board %s", HW_VERSION_MTRV1_0_1);
} else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTRV1_0_2, strlen(HW_VERSION_MTRV1_0_2)) == 0) {
attr_group = &mtrv1_0_2_platform_attribute_group;
gpio_pins = gpio_pins_mtrv1_0_2;
- set_buttons(default_buttons);
+ set_buttons(default_buttons);
mts_hw_version = MTRV1_0_2;
log_info("detected board %s", HW_VERSION_MTRV1_0_2);
+ } else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTRV1_0_3, strlen(HW_VERSION_MTRV1_0_3)) == 0) {
+ attr_group = &mtrv1_0_3_platform_attribute_group;
+ gpio_pins = gpio_pins_mtrv1_0_3;
+ set_buttons(default_buttons);
+ mts_hw_version = MTRV1_0_3;
+ log_info("detected board %s", HW_VERSION_MTRV1_0_3);
} else if (strncmp(id_eeprom.hw_version, HW_VERSION_MTHS_0_0, strlen(HW_VERSION_MTHS_0_0)) == 0) {
attr_group = &mths_0_0_platform_attribute_group;
gpio_pins = gpio_pins_mths_0_0;
diff --git a/io-module/mts_io_module.h b/io-module/mts_io_module.h
index 1f2d618..de2b27d 100644
--- a/io-module/mts_io_module.h
+++ b/io-module/mts_io_module.h
@@ -30,13 +30,14 @@
#define HW_VERSION_MTRV1_0_0 "MTRV1-0.0"
#define HW_VERSION_MTRV1_0_1 "MTRV1-0.1"
#define HW_VERSION_MTRV1_0_2 "MTRV1-0.2" // Cat M
+#define HW_VERSION_MTRV1_0_3 "MTRV1-0.3" // MTR-MTQ
#define HW_VERSION_MTCDT_0_0 "MTCDT-0.0"
#define HW_VERSION_MTCDT_0_1 "MTCDT-0.1"
#define HW_VERSION_MTCDTIP_0_0 "MTCDTIP-0.0"
#define HW_VERSION_MTCDTIPHP_0_0 "MTCDTIPHP-0.0"
#define HW_VERSION_MTCAP_0_0 "MTCAP-0.0"
#define HW_VERSION_MTCAP_0_1 "MTCAP-0.1"
-#define HW_VERSION_MTHS_0_0 "MTHS-0.0"
+#define HW_VERSION_MTHS_0_0 "MTHS-0.0"
enum {
MTCDP_E1_DK_0_0,
@@ -46,10 +47,11 @@ enum {
MTR_0_1,
MTRV1_0_0,
MTRV1_0_1,
- MTRV1_0_2,
+ MTRV1_0_2,
+ MTRV1_0_3,
MTCDT_0_0,
MTCDT_0_1,
- MTCDTIPHP_0_0,
+ MTCDTIPHP_0_0,
MTCAP_0_0,
MTCAP_0_1,
MTHS_0_0,