Support mtcpm CPU board4.3.0

1 files changed, 2001 insertions, 0 deletions

diff --git a/io-module/machine/mtr.c b/io-module/machine/mtr.c
new file mode 100644
index 0000000..8664984
--- /dev/null
+++ b/io-module/machine/mtr.c
@@ -0,0 +1,2001 @@
+#include "at91gpio.h"
+static struct gpio_pin gpio_pins_mtr_0_0[] = {
+	{
+		.name = "ETH_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PC6,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "eth-reset",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_POWER_MONITOR",
+		.pin = {
+			.gpio = AT91_PIN_PA23,
+			.flags = GPIOF_IN,
+			.label = "radio-power-monitor",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PA22,
+			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,
+			.label = "radio-reset",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_POWER",
+		.pin = {
+			.gpio = AT91_PIN_PA21,
+			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,
+			.label = "radio-power",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "DEVICE_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PC4,
+			.flags = GPIOF_IN,
+			.label = "reset",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LS_LED",
+		.pin = {
+			.gpio = AT91_PIN_PC16,
+#if LED_LS_CONTROLLABLE
+			.flags = GPIOF_OUT_INIT_HIGH,
+#else
+			.flags = GPIOF_IN,
+#endif
+			.label = "led-ls",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "STATUS_LED",
+		.pin = {
+			.gpio = AT91_PIN_PC21,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "led-status",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.pin = {
+			.gpio = AT91_PIN_PC15,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-wifi",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.pin = {
+			.gpio = AT91_PIN_PC15,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-b",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.pin = {
+			.gpio = AT91_PIN_PC20,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-cd",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.pin = {
+			.gpio = AT91_PIN_PC20,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-c",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.pin = {
+			.gpio = AT91_PIN_PC19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig1",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.pin = {
+			.gpio = AT91_PIN_PC19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-d",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.pin = {
+			.gpio = AT91_PIN_PC18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig2",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.pin = {
+			.gpio = AT91_PIN_PC18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-e",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.pin = {
+			.gpio = AT91_PIN_PC17,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig3",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.pin = {
+			.gpio = AT91_PIN_PC17,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-f",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "RI_B",
+		.pin = {
+			.gpio = AT91_PIN_PC25,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-ri",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DTR_B",
+		.pin = {
+			.gpio = AT91_PIN_PC26,
+			.flags = GPIOF_IN,
+			.label = "extserial-dtr",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DSR_B",
+		.pin = {
+			.gpio = AT91_PIN_PC27,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-dsr",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DCD_B",
+		.pin = {
+			.gpio = AT91_PIN_PC28,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-dcd",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "BT_EN",
+		.pin = {
+			.gpio = AT91_PIN_PA28,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "bt-enabled",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "WLAN_EN",
+		.pin = {
+			.gpio = AT91_PIN_PA27,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "wlan-enabled",
+		},
+		.active_low = 0,
+	},
+	{ },
+};
+
+static struct gpio_pin gpio_pins_mtr_0_1[] = {
+	{
+		.name = "ETH_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PC6,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "eth-reset",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_POWER_MONITOR",
+		.pin = {
+			.gpio = AT91_PIN_PA23,
+			.flags = GPIOF_IN,
+			.label = "radio-power-monitor",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PA22,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "radio-reset",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_POWER",
+		.pin = {
+			.gpio = AT91_PIN_PA21,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "radio-power",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "DEVICE_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PC4,
+			.flags = GPIOF_IN,
+			.label = "reset",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LS_LED",
+		.pin = {
+			.gpio = AT91_PIN_PC16,
+#if LED_LS_CONTROLLABLE
+			.flags = GPIOF_OUT_INIT_HIGH,
+#else
+			.flags = GPIOF_IN,
+#endif
+			.label = "led-ls",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "STATUS_LED",
+		.pin = {
+			.gpio = AT91_PIN_PC21,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "led-status",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.pin = {
+			.gpio = AT91_PIN_PC15,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-wifi",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.pin = {
+			.gpio = AT91_PIN_PC15,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-b",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.pin = {
+			.gpio = AT91_PIN_PC20,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-cd",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.pin = {
+			.gpio = AT91_PIN_PC20,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-c",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.pin = {
+			.gpio = AT91_PIN_PC19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig1",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.pin = {
+			.gpio = AT91_PIN_PC19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-d",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.pin = {
+			.gpio = AT91_PIN_PC18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig2",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.pin = {
+			.gpio = AT91_PIN_PC18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-e",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.pin = {
+			.gpio = AT91_PIN_PC17,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig3",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.pin = {
+			.gpio = AT91_PIN_PC17,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-f",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "RI_B",
+		.pin = {
+			.gpio = AT91_PIN_PC25,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-ri",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DTR_B",
+		.pin = {
+			.gpio = AT91_PIN_PC26,
+			.flags = GPIOF_IN,
+			.label = "extserial-dtr",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DSR_B",
+		.pin = {
+			.gpio = AT91_PIN_PC27,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-dsr",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DCD_B",
+		.pin = {
+			.gpio = AT91_PIN_PC28,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-dcd",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "BT_EN",
+		.pin = {
+			.gpio = AT91_PIN_PA28,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "bt-enabled",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "WLAN_EN",
+		.pin = {
+			.gpio = AT91_PIN_PA27,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "wlan-enabled",
+		},
+		.active_low = 0,
+	},
+	{ },
+};
+
+static struct gpio_pin gpio_pins_mtrv1_0_0[] = {
+	{
+		.name = "ETH_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PC6,
+			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,  /* without GPIOF_OPEN_DRAIN causes issues with the Micrel KSZ8091RNBCA (RMII) PHY */
+			.label = "eth-reset",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_POWER_MONITOR",
+		.pin = {
+			.gpio = AT91_PIN_PA23,
+			.flags = GPIOF_IN,
+			.label = "radio-power-monitor",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PA22,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "radio-reset",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_POWER",
+		.pin = {
+			.gpio = AT91_PIN_PA21,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "radio-power",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "DEVICE_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PC4,
+			.flags = GPIOF_IN,
+			.label = "reset",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LS_LED",
+		.pin = {
+			.gpio = AT91_PIN_PC4,
+#if LED_LS_CONTROLLABLE
+			.flags = GPIOF_OUT_INIT_HIGH,
+#else
+			.flags = GPIOF_IN,
+#endif
+			.label = "led-ls",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "STATUS_LED",
+		.pin = {
+			.gpio = AT91_PIN_PC21,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "led-status",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.pin = {
+			.gpio = AT91_PIN_PC15,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-wifi",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.pin = {
+			.gpio = AT91_PIN_PC15,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-b",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.pin = {
+			.gpio = AT91_PIN_PC20,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-cd",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.pin = {
+			.gpio = AT91_PIN_PC20,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-c",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.pin = {
+			.gpio = AT91_PIN_PC19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig1",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.pin = {
+			.gpio = AT91_PIN_PC19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-d",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.pin = {
+			.gpio = AT91_PIN_PC18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig2",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.pin = {
+			.gpio = AT91_PIN_PC18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-e",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.pin = {
+			.gpio = AT91_PIN_PC17,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig3",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.pin = {
+			.gpio = AT91_PIN_PC17,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-f",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "RI_B",
+		.pin = {
+			.gpio = AT91_PIN_PC25,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-ri",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DTR_B",
+		.pin = {
+			.gpio = AT91_PIN_PC26,
+			.flags = GPIOF_IN,
+			.label = "extserial-dtr",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DSR_B",
+		.pin = {
+			.gpio = AT91_PIN_PC27,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-dsr",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DCD_B",
+		.pin = {
+			.gpio = AT91_PIN_PC28,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-dcd",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "BT_EN",
+		.pin = {
+			.gpio = AT91_PIN_PA28,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "bt-enabled",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "WLAN_EN",
+		.pin = {
+			.gpio = AT91_PIN_PA27,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "wlan-enabled",
+		},
+		.active_low = 0,
+	},
+	{ },
+};
+
+
+static struct gpio_pin gpio_pins_mtrv1_0_1[] = {
+	{
+		.name = "ETH_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PC6,
+			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,  /* without GPIOF_OPEN_DRAIN causes issues with the Micrel KSZ8091RNBCA (RMII) PHY */
+			.label = "eth-reset",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_POWER_MONITOR",
+		.pin = {
+			.gpio = AT91_PIN_PA23,
+			.flags = GPIOF_IN,
+			.label = "radio-power-monitor",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PA22,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "radio-reset",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_POWER",
+		.pin = {
+			.gpio = AT91_PIN_PA21,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "radio-power",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "DEVICE_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PC4,
+			.flags = GPIOF_IN,
+			.label = "reset",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LS_LED",
+		.pin = {
+			.gpio = AT91_PIN_PC4,
+#if LED_LS_CONTROLLABLE
+			.flags = GPIOF_OUT_INIT_HIGH,
+#else
+			.flags = GPIOF_IN,
+#endif
+			.label = "led-ls",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "STATUS_LED",
+		.pin = {
+			.gpio = AT91_PIN_PC21,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "led-status",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.pin = {
+			.gpio = AT91_PIN_PC15,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-wifi",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.pin = {
+			.gpio = AT91_PIN_PC15,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-b",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.pin = {
+			.gpio = AT91_PIN_PC20,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-cd",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.pin = {
+			.gpio = AT91_PIN_PC20,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-c",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.pin = {
+			.gpio = AT91_PIN_PC19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig1",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.pin = {
+			.gpio = AT91_PIN_PC19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-d",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.pin = {
+			.gpio = AT91_PIN_PC18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig2",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.pin = {
+			.gpio = AT91_PIN_PC18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-e",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.pin = {
+			.gpio = AT91_PIN_PC17,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig3",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.pin = {
+			.gpio = AT91_PIN_PC17,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-f",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "RI_B",
+		.pin = {
+			.gpio = AT91_PIN_PC25,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-ri",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DTR_B",
+		.pin = {
+			.gpio = AT91_PIN_PC26,
+			.flags = GPIOF_IN,
+			.label = "extserial-dtr",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DSR_B",
+		.pin = {
+			.gpio = AT91_PIN_PC27,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-dsr",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DCD_B",
+		.pin = {
+			.gpio = AT91_PIN_PC28,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-dcd",
+		},
+		.active_low = 1,
+	},
+
+	// The difference between MTRv1_0_0 and MTRv1_0_1 starts here
+	{
+		.name = "WIFI_BT_ULPWKUP",
+		.pin = {
+			.gpio = AT91_PIN_PA0,
+			.flags = GPIOF_IN,
+			.label = "wifi-bt-ulpwkup",
+		}
+	},
+	{
+		.name = "WIFI_BT_LPWKUP",
+		.pin = {
+			.gpio = AT91_PIN_PA6,
+			.flags = GPIOF_IN,
+			.label = "wifi-bt-lpwkup",
+		}
+	},
+	{
+		.name = "WIFI_BT_INT",
+		.pin = {
+			.gpio = AT91_PIN_PB11,
+			.flags = GPIOF_IN,
+			.label = "wifi-bt-int",
+		}
+	},
+	{
+		.name = "WIFI_BT_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PD14,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "wifi-bt-reset",
+		}
+	},
+	{
+		.name = "WIFI_BT_LPMODE",
+		.pin = {
+			.gpio = AT91_PIN_PD20,
+			.flags = GPIOF_IN,
+			.label = "wifi-bt-lpmode",
+		}
+	},
+	{
+		.name = "GNSS_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PD15,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "gnss-reset",
+		}
+	},
+	{
+		.name = "SECURE_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PD16,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "secure-reset",
+		}
+	},
+	{
+		.name = "USBHUB_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PD18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "usbhub-reset",
+		}
+	},
+	{
+		.name = "GNSS_INT",
+		.pin = {
+			.gpio = AT91_PIN_PD19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "gnss-int",
+		}
+	},
+
+
+	{ },
+};
+
+static struct gpio_pin gpio_pins_mtrv1_0_2[] = {
+	{
+		.name = "ETH_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PC6,
+			.flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,  /* without GPIOF_OPEN_DRAIN causes issues with the Micrel KSZ8091RNBCA (RMII) PHY */
+			.label = "eth-reset",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_POWER_MONITOR",
+		.pin = {
+			.gpio = AT91_PIN_PA23,
+			.flags = GPIOF_IN,
+			.label = "radio-power-monitor",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PA22,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "radio-reset",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "RADIO_POWER",
+		.pin = {
+			.gpio = AT91_PIN_PA21,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "radio-power",
+		},
+		.active_low = 0,
+	},
+	{
+		.name = "DEVICE_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PC4,
+			.flags = GPIOF_IN,
+			.label = "reset",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LS_LED",
+		.pin = {
+			.gpio = AT91_PIN_PC4,
+#if LED_LS_CONTROLLABLE
+			.flags = GPIOF_OUT_INIT_HIGH,
+#else
+			.flags = GPIOF_IN,
+#endif
+			.label = "led-ls",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "STATUS_LED",
+		.pin = {
+			.gpio = AT91_PIN_PC21,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "led-status",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.pin = {
+			.gpio = AT91_PIN_PC15,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-wifi",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED3",
+		.pin = {
+			.gpio = AT91_PIN_PC15,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-b",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.pin = {
+			.gpio = AT91_PIN_PC20,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-cd",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED4",
+		.pin = {
+			.gpio = AT91_PIN_PC20,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-c",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.pin = {
+			.gpio = AT91_PIN_PC19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig1",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED6",
+		.pin = {
+			.gpio = AT91_PIN_PC19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-d",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.pin = {
+			.gpio = AT91_PIN_PC18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig2",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED7",
+		.pin = {
+			.gpio = AT91_PIN_PC18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-e",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.pin = {
+			.gpio = AT91_PIN_PC17,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-sig3",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "LED8",
+		.pin = {
+			.gpio = AT91_PIN_PC17,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "led-f",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "RI_B",
+		.pin = {
+			.gpio = AT91_PIN_PC25,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-ri",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DTR_B",
+		.pin = {
+			.gpio = AT91_PIN_PC26,
+			.flags = GPIOF_IN,
+			.label = "extserial-dtr",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DSR_B",
+		.pin = {
+			.gpio = AT91_PIN_PC27,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-dsr",
+		},
+		.active_low = 1,
+	},
+	{
+		.name = "DCD_B",
+		.pin = {
+			.gpio = AT91_PIN_PC28,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "extserial-dcd",
+		},
+		.active_low = 1,
+	},
+
+	// The difference between MTRv1_0_0 and MTRv1_0_1 starts here
+	{
+		.name = "WIFI_BT_ULPWKUP",
+		.pin = {
+			.gpio = AT91_PIN_PA0,
+			.flags = GPIOF_IN,
+			.label = "wifi-bt-ulpwkup",
+		}
+	},
+	{
+		.name = "WIFI_BT_LPWKUP",
+		.pin = {
+			.gpio = AT91_PIN_PA6,
+			.flags = GPIOF_IN,
+			.label = "wifi-bt-lpwkup",
+		}
+	},
+	{
+		.name = "WIFI_BT_INT",
+		.pin = {
+			.gpio = AT91_PIN_PB11,
+			.flags = GPIOF_IN,
+			.label = "wifi-bt-int",
+		}
+	},
+	{
+		.name = "WIFI_BT_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PD14,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "wifi-bt-reset",
+		}
+	},
+	{
+		.name = "WIFI_BT_LPMODE",
+		.pin = {
+			.gpio = AT91_PIN_PD20,
+			.flags = GPIOF_IN,
+			.label = "wifi-bt-lpmode",
+		}
+	},
+	{
+		.name = "GNSS_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PD15,
+			.flags = GPIOF_OUT_INIT_LOW,
+			.label = "gnss-reset",
+		}
+	},
+	{
+		.name = "SECURE_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PD16,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "secure-reset",
+		}
+	},
+	{
+		.name = "USBHUB_RESET",
+		.pin = {
+			.gpio = AT91_PIN_PD18,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "usbhub-reset",
+		}
+	},
+	{
+		.name = "GNSS_INT",
+		.pin = {
+			.gpio = AT91_PIN_PD19,
+			.flags = GPIOF_OUT_INIT_HIGH,
+			.label = "gnss-int",
+		}
+	},
+        // Difference with mtrv1_0_1 starts here
+        {
+                .name = "RADIO_WM_LK_M",  // WM LINK Monitor for CAT M
+                .pin = {
+                        .gpio = AT91_PIN_PA14,
+			.flags = GPIOF_IN,
+			.label = "radio-wm-lk-m",
+		}
+	},
+
+	{ },
+};
+
+static struct gpio_pin gpio_pins_mtrv1_0_3[] = {
+       {
+               .name = "ETH_RESET",
+               .pin = {
+                       .gpio = AT91_PIN_PC6,
+                       .flags = GPIOF_OUT_INIT_HIGH | GPIOF_OPEN_DRAIN,  /* without GPIOF_OPEN_DRAIN causes issues with the Micrel KSZ8091RNBCA (RMII) PHY */
+                       .label = "eth-reset",
+               },
+               .active_low = 0,
+       },
+       {
+               .name = "DEVICE_RESET",
+               .pin = {
+                       .gpio = AT91_PIN_PC4,
+                       .flags = GPIOF_IN,
+                       .label = "reset",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LS_LED",
+               .pin = {
+                       .gpio = AT91_PIN_PC4,
+#if LED_LS_CONTROLLABLE
+                       .flags = GPIOF_OUT_INIT_HIGH,
+#else
+                       .flags = GPIOF_IN,
+#endif
+                       .label = "led-ls",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "STATUS_LED",
+               .pin = {
+                       .gpio = AT91_PIN_PC21,
+                       .flags = GPIOF_OUT_INIT_LOW,
+                       .label = "led-status",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LED3",
+               .pin = {
+                       .gpio = AT91_PIN_PC15,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "led-wifi",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LED3",
+               .pin = {
+                       .gpio = AT91_PIN_PC15,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "led-b",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LED4",
+               .pin = {
+                       .gpio = AT91_PIN_PC20,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "led-cd",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LED4",
+               .pin = {
+                       .gpio = AT91_PIN_PC20,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "led-c",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LED6",
+               .pin = {
+                       .gpio = AT91_PIN_PC19,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "led-sig1",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LED6",
+               .pin = {
+                       .gpio = AT91_PIN_PC19,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "led-d",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LED7",
+               .pin = {
+                       .gpio = AT91_PIN_PC18,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "led-sig2",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LED7",
+               .pin = {
+                       .gpio = AT91_PIN_PC18,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "led-e",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LED8",
+               .pin = {
+                       .gpio = AT91_PIN_PC17,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "led-sig3",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "LED8",
+               .pin = {
+                       .gpio = AT91_PIN_PC17,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "led-f",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "RI_B",
+               .pin = {
+                       .gpio = AT91_PIN_PC25,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "extserial-ri",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "DTR_B",
+               .pin = {
+                       .gpio = AT91_PIN_PC26,
+                       .flags = GPIOF_IN,
+                       .label = "extserial-dtr",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "DSR_B",
+               .pin = {
+                       .gpio = AT91_PIN_PC27,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "extserial-dsr",
+               },
+               .active_low = 1,
+       },
+       {
+               .name = "DCD_B",
+               .pin = {
+                       .gpio = AT91_PIN_PC28,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "extserial-dcd",
+               },
+               .active_low = 1,
+       },
+
+       // The difference between MTRv1_0_0 and MTRv1_0_1 starts here
+      {
+               .name = "WIFI_BT_ULPWKUP",
+               .pin = {
+                       .gpio = AT91_PIN_PA0,
+                       .flags = GPIOF_IN,
+                       .label = "wifi-bt-ulpwkup",
+               }
+       },
+      {
+               .name = "WIFI_BT_LPWKUP",
+               .pin = {
+                       .gpio = AT91_PIN_PA6,
+                       .flags = GPIOF_IN,
+                       .label = "wifi-bt-lpwkup",
+               }
+       },
+       {
+               .name = "WIFI_BT_INT",
+               .pin = {
+                       .gpio = AT91_PIN_PB11,
+                       .flags = GPIOF_IN,
+                       .label = "wifi-bt-int",
+               }
+       },
+       {
+               .name = "WIFI_BT_RESET",
+               .pin = {
+                       .gpio = AT91_PIN_PD14,
+                       .flags = GPIOF_OUT_INIT_HIGH,
+                       .label = "wifi-bt-reset",
+               }
+       },
+       {
+               .name = "WIFI_BT_LPMODE",
+               .pin = {
+                       .gpio = AT91_PIN_PD20,
+                       .flags = GPIOF_IN,
+                       .label = "wifi-bt-lpmode",
+               }
+       },
+       {
+               .name = "GNSS_RESET",
+               .pin = {
+                       .gpio = AT91_PIN_PD15,
+                       .flags = GPIOF_OUT_INIT_LOW,
+                       .label = "gnss-reset",
+               }