summaryrefslogtreecommitdiff
path: root/recipes-kernel/linux
AgeCommit message (Expand)AuthorFiles
2019-11-11Bump kernel revision for Quectel patch5.1.8John Klug1
2019-11-11Adding tmp102 module to the available modulesJohn Klug1
2019-11-11Update QMI WWAN patch for QuectelJeff Hatch1
2019-11-11Add linux-4.9-quectel_qmi_wwan_support.patch to linux-at91_4.9.87.bb recipeJeff Hatch1
2019-11-11Additional updates to qmi for Quectel radio supportJeff Hatch1
2019-07-03btclonly package for rs9113, and mths compatible "machine" for kernelJohn Klug1
2019-07-03150mS does not work with MTHS, so try 300mS timeout on PMECCJohn Klug2
2019-07-03Add the xt physdev match module for MTHSJohn Klug1
2019-07-03Remove vbus-gpio which breaks the USB interface.John Klug2
2019-07-03Set output low on the GNSS-RESET lineJohn Klug1
2019-07-03Add support to option driver for Quectel EG955.0.0Jeff Hatch2
2019-07-03GNSS reset fix to suppress GPS serial port to protect XR12V1414 from bad PID/VIDJohn Klug2
2019-07-03Bump the revision of the kernel for new device treeJohn Klug1
2019-07-03Remove unused mmc pins, and put in PD14-PD20 in mtrv1John Klug1
2019-07-03Use output-high for MTCDT PD14-PD19 resetsJohn Klug1
2019-07-03Autoload i2c-dev for LoRa usersJohn Klug1
2019-07-03Remove unused mmc1-boardJohn Klug1
2019-07-03Syntax error in device treeJohn Klug1
2019-07-03Missing semicolon in device tree.John Klug1
2019-07-03Typo in name of patch for led brightnessJohn Klug1
2019-07-03Fix LED status on upgrade.John Klug2
2019-07-03Correct the SDIO active pin to PA1, and set deglitchJohn Klug1
2019-07-03Blink LEDs when kernel loads, not when modules loadJohn Klug2
2019-07-03Bump kernel revision for CGROUPSJohn Klug1
2019-07-03Remove BLK_CGROUP and add PROC_EVENTS, and take the consequences from make me...John Klug1
2019-07-03Make defconfig compatible with make menuconfig again.John Klug1
2019-07-03All LTE MTR types can user B18 as the PPS signalJohn Klug1
2019-07-03Change pps to pps-0 in device tree to allow for multiple entries.John Klug1
2019-07-03Add rising edge IRQ to Murata - this is required for proper interruptMike Nicholson1
2019-07-03Use timing from previous software iterations.Mike Nicholson1
2019-07-03Enable/disable murata in wl12xx SDIO driver; deglitch, remove pull-downMike Nicholson3
2019-07-03Security enhancement (ASLR) : Disable CONFIG_COMPAT_BRK so that randomize_va_...Jeff Hatch1
2019-07-03Make it clear why there are two PPS pins definedJohn Klug1
2019-07-03Add PPS for MTRV1-0.0 and MTRV1-0.1John Klug1
2019-07-03Add the DT Overlay patch to kernel for MTRV1John Klug1
2019-07-03Add DMA to dbgu (not on uart0)Mike Nicholson1
2019-07-03Add a couple jiffies of slack in the PMECCERRLOCMike Nicholson2
2019-07-03DMA for dbgu on MTCDT, and MTCAP (MTCAP requires testing)Mike Nicholson2
2019-07-03Enable DMA on dbgu serial (fixes overrun issue)Mike Nicholson1
2019-07-03Add DMA to uart0, delete m25p80Mike Nicholson1
2019-07-03Add mts-io/John's radio reset, remove m25p80, remove 16-bit nand, streamline ...Mike Nicholson1
2019-07-03Use DMA for Venus on gps0/ttyS1, get Venus workingMike Nicholson1
2019-07-03Pull down for radio monitor on mtrv1John Klug1
2019-07-03Original MTR, initial revisionMike3
2019-07-03Pins must be set from a driver. Tie the radio pins to the MTS-IO driver.John Klug1
2019-07-03PD21 should be pull down, remove conflicting unused NAND.John Klug1
2019-07-03Add Telit Sprint patch for LXFP.John Klug2
2019-07-03ledtrig-netdev patch for compatibility with old Multitech codeJohn Klug4
2019-07-03Bump the kernel and mts-io revisionJohn Klug1
2019-07-03Remove uneeded devices from device tree and get SPI working.John Klug1