Age | Commit message (Expand) | Author | Files |
2022-01-05 | Remove extra resets caused by new at91bootstrap5.3.26 | John Klug | 1 |
2021-12-29 | suppress rs9113 reset until /etc/init.d/rs9113 | John Klug | 1 |
2021-12-29 | Support for MTCDTIP with overlay | John Klug | 2 |
2021-12-29 | Remove rs9113 reset from /etc/init.d/mts-io, as it is redundant | John Klug | 1 |
2021-12-29 | Add the names of the GPIOs for the MTCDT-0.2 IO expander | John Klug | 1 |
2021-12-29 | Development patch for MTCDT-0.2 mts-io | John Klug | 1 |
2021-12-29 | Move gps0 symlink to UDEV | John Klug | 1 |
2021-12-29 | mts-io init script must set serial link even when there is no GPS | John Klug | 1 |
2021-12-29 | Add radio-reset notification, new MTRV1-0.4 hardware | John Klug | 1 |
2021-06-23 | Fix bugs in init script, add mts-io-skipcharge package for development and te... | John Klug | 1 |
2021-06-23 | Wait for supercap charge up to 3 minutes. Poweroff if no power | John Klug | 2 |
2021-06-23 | MTCDT3 needs no symlink for spi | John Klug | 1 |
2021-06-22 | Load accessory cards for MTCDT3 | John Klug | 1 |
2021-06-22 | Set battery voltage for mtcap with battery capability | John Klug | 1 |
2021-06-22 | GPS should depend on CPU hw_type, not base board | John Klug | 1 |
2021-06-22 | overlay has its own init script, remove mtcdt3b during stop, fix gps on MTCPM-BB | John Klug | 1 |
2021-06-22 | Fix misspelling and remove debug from /etc/init.d/mts-io | John Klug | 1 |
2021-06-22 | Update mts-io driver for GPS on MTCAP | John Klug | 1 |
2021-06-22 | Move overlay code from mts-io to mt-dt-overlay | John Klug | 2 |
2020-11-11 | Add mt-dt-overlay to support GPS PPS on mtcap | Mike Nicholson | 1 |
2020-11-11 | Add mts-io 4.3.0 from arch/common branch multiarch5-thud | Andrii Pientsov | 1 |
2019-07-03 | GNSS reset fix to suppress GPS serial port to protect XR12V1414 from bad PID/VID | John Klug | 1 |
2019-07-03 | Blacklist mts-io driver so it is not loaded by device tree. | John Klug | 1 |
2019-07-03 | Typo in name of patch for led brightness | John Klug | 1 |
2019-07-03 | Create routine in mts-io init script to load device tree. | John Klug | 1 |
2019-07-03 | Add new file /var/run/config/gpstype | John Klug | 1 |
2019-07-03 | Only MTRV1-0.0 of MTRV1 Uses /dev/ttyS1 | John Klug | 1 |
2019-07-03 | Set /dev/gps0, even if gps capability flag is false. | John Klug | 1 |
2019-07-03 | Add spidev driver for LoRa. | John Klug | 2 |
2019-07-03 | Enable eeprom read from mts-io | John Klug | 1 |
2019-07-03 | Remove unused code that produces errors in mts-io init script. | John Klug | 1 |
2019-07-03 | Put back Vizzini driver and install the kernel patch | John Klug | 1 |
2019-07-03 | Update the tty drivers to the Linux 4 name | John Klug | 1 |
2019-07-03 | Report firmware directory to kernel before modprobe. | Mike Nicholson | 1 |
2019-07-03 | Add call to inform kernel about firmware (i2c EEPROM) location | Mike Nicholson | 1 |
2019-07-03 | Add code to read hw-version from EEPROM | John Klug | 1 |
2018-10-15 | Split mts-io driver module into separate modules. | John Klug | 1 |
2018-08-29 | Simpler check for MTCDTIPHP4.0.2 | John Klug | 1 |
2018-08-29 | mts-io init script adjusted for MTCDTIPHP with no GPS capability flag | John Klug | 1 |
2018-06-04 | Add mtr stuff to mLinux | John Klug | 1 |
2018-05-24 | Use GPS capability on all units with GPS, and use ttyS1 on all MTR except MTR...4.0.0 | John Klug | 1 |
2018-05-15 | Move radio-reset init scripts to a separate recipe. | Mykyta Dorokhin | 2 |
2018-05-14 | Move radio reset to /etc/init.d/radio-reset, default is reset on boot, not s... | John Klug | 3 |
2018-05-14 | put back radio-reset: /etc/init.d/mts-io /etc/init.d/radio-reset /etc/default... | John Klug | 1 |
2018-05-11 | Fix /dev/gps0 for all devices, and remove unneeded radio-reset, not in MTR | John Klug | 1 |
2018-04-19 | New mts-io 2.0.0 driver for LoRa 2.1 and better discovery | John Klug | 1 |
2018-02-08 | Removing dead code. Should have no affect on operation. | John Klug | 1 |
2018-02-08 | Fix shell path corruption | John Klug | 1 |
2018-02-08 | Fix USB reset Telit Error -62 and Redpine wrong speed detection. | John Klug | 1 |
2017-09-14 | Need a space in the radio-reset existence test. | John Klug | 1 |