index
:
meta-multitech.git
3
3.19-dt-overlay
4
5.3.x
master
MultiTech BSP Layer
Multi-Tech Systems
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
recipes-bsp
/
multitech
/
mts-io
/
mts-io.init
Age
Commit message (
Collapse
)
Author
Files
2023-01-18
SDIO modules on MTCDT3 hangs reboot when mts-io is removed
John Klug
1
2022-09-22
MTX-4646 MTCDT3AC: Fix mts-io init script to properly handle new MTCDT3AC ↵
Vyacheslav Pedash
1
hardware version
2022-08-23
MTX-4571 MTCDT3AC: Add gps link to UART4 for the MTCPM rev 0.2
Vyacheslav Pedash
1
2022-02-04
Add MTCDTIP case to call modprobe spidev in mts-io.init
Jason Reiss
1
2022-01-13
Remove extra resets caused by new at91bootstrap
John Klug
1
2022-01-11
suppress rs9113 reset until /etc/init.d/rs9113
John Klug
1
2022-01-11
Support for MTCDTIP with overlay
John Klug
1
2021-11-18
Remove rs9113 reset from /etc/init.d/mts-io, as it is redundant
John Klug
1
2021-11-18
Move gps0 symlink to UDEV
John Klug
1
2021-10-29
remove spidev linking from mts-io init
Jason Reiss
1
2021-10-29
Revert "Revert "Added support for mtac-003""
Jason Reiss
1
This reverts commit 5ec3c59dd16c42c4bade24ee75773a8764fcb01e.
2021-10-25
Revert "Added support for mtac-003"
Harsh Sharma
1
This reverts commit d390864f59232db90b80e5e65705c03687db2f1a.
2021-10-14
Added support for mtac-003
Harsh Sharma
1
2021-10-05
mts-io init script must set serial link even when there is no GPS
John Klug
1
2021-09-07
Add radio-reset notification, new MTRV1-0.4 hardware
John Klug
1
2020-12-14
MTCDT3 needs no symlink for spi
John Klug
1
2020-10-30
Load accessory cards for MTCDT3
John Klug
1
2020-10-29
GPS should depend on CPU hw_type, not base board
John Klug
1
2020-10-26
overlay has its own init script, remove mtcdt3b during stop, fix gps on MTCPM-BB
John Klug
1
2020-05-14
Add mts-io 4.3.0 from arch/common branch multiarch5-thud
Andrii Pientsov
1
2019-05-23
GNSS reset fix to suppress GPS serial port to protect XR12V1414 from bad PID/VID
John Klug
1
2019-04-05
Typo in name of patch for led brightness
John Klug
1
2019-03-04
Create routine in mts-io init script to load device tree.
John Klug
1
2019-02-27
Add new file /var/run/config/gpstype
John Klug
1
2019-02-19
Only MTRV1-0.0 of MTRV1 Uses /dev/ttyS1
John Klug
1
2019-02-19
Set /dev/gps0, even if gps capability flag is false.
John Klug
1
2019-01-25
Add spidev driver for LoRa.
John Klug
1
2019-01-24
Remove unused code that produces errors in mts-io init script.
John Klug
1
2019-01-21
Put back Vizzini driver and install the kernel patch
John Klug
1
2019-01-08
Update the tty drivers to the Linux 4 name
John Klug
1
2019-01-07
Add call to inform kernel about firmware (i2c EEPROM) location
Mike Nicholson
1
2018-11-19
Add code to read hw-version from EEPROM
John Klug
1
2018-10-15
Split mts-io driver module into separate modules.
John Klug
1
2018-08-29
Simpler check for MTCDTIPHP
4.0.2
John Klug
1
2018-08-29
mts-io init script adjusted for MTCDTIPHP with no GPS capability flag
John Klug
1
2018-06-04
Add mtr stuff to mLinux
John Klug
1
2018-05-24
Use GPS capability on all units with GPS, and use ttyS1 on all MTR except ↵
4.0.0
John Klug
1
MTRV1-0.2
2018-05-14
Move radio reset to /etc/init.d/radio-reset, default is reset on boot, not ↵
John Klug
1
shutdown
2018-05-14
put back radio-reset: /etc/init.d/mts-io /etc/init.d/radio-reset ↵
John Klug
1
/etc/default/radio-reset
2018-05-11
Fix /dev/gps0 for all devices, and remove unneeded radio-reset, not in MTR
John Klug
1
2018-04-19
New mts-io 2.0.0 driver for LoRa 2.1 and better discovery
John Klug
1
2018-02-08
Removing dead code. Should have no affect on operation.
John Klug
1
2018-02-08
Fix shell path corruption
John Klug
1
2018-02-08
Fix USB reset Telit Error -62 and Redpine wrong speed detection.
John Klug
1
2017-09-14
Update the mts-io scripts for no radio case.
John Klug
1
2017-03-10
Need setup time for reset
John Klug
1
2017-02-13
mts-io: add link creation for MTAC-LORA SPI cards spidev0.0 -> ap1 or ap2
3.3.2
Jason Reiss
1
2016-11-04
Add mts-io cdone & optional gnss-reset, debug configuration
John Klug
1
2016-10-11
Fix missing resets.
John Klug
1
2016-09-20
Bring mts-io.init up to speed and fix radio reset
John Klug
1
[next]