summaryrefslogtreecommitdiff
path: root/recipes-kernel
AgeCommit message (Expand)AuthorFiles
2022-03-24Remove bad block table introduced with GPIOD MTCDT changeJohn Klug1
2022-03-23github no longer accepts clear git protocol so switch to httpsJohn Klug3
2022-03-22Fix the mts-rm-rs9113 remove package for the overlayfsJohn Klug1
2022-03-21Remove 1.6.5 disconnect/receive semaphores that do not work from rs9113 modulesJohn Klug2
2022-03-17Spin Lock in 1.6.5 rs9113 driver breaks semaphoreJohn Klug1
2022-03-17Spin Lock in 1.6.5 rs9113 driver breaks semaphoreJohn Klug1
2022-03-10Kernel image install from ipkJohn Klug1
2022-02-24output-high, output-low is ignored by Atmel pinctrl driverJohn Klug1
2022-02-22Map device tree nand@0 to /dev/mtd0John Klug1
2022-02-17Move device tree overlay warning to debug statusJohn Klug1
2022-02-17Compatibility fix for new mts-io driver 4.9.0John Klug5
2022-02-155.3.x MTCDT device tree with name-gpio/connection-id for mts-io driversharma-mts3
2022-01-21fix rs9113 recipeSerhii Voloshynov1
2022-01-19rs9113: Fix PKG QA Complaint about new debug packageJohn Klug1
2022-01-19rs9113: Use PKGR like other Dunfell recipes, move to rev 14John Klug3
2022-01-14fix MTR and MTCAP buildsSerhii Voloshynov1
2022-01-14Merge branch 'vs/mtx-4338' into '6' Jeff Hatch13
2022-01-13temporarily use rs9113 IPK r10.Serhii Voloshynov1
2022-01-11Disable EHCI (High Speed USB) by default for MTCDT Set EHCI (High Speed USB)...Serhii Voloshynov1
2022-01-11Set EHCI (High Speed USB) by default for MTCDTJohn Klug1
2022-01-11Disable EHCI (High Speed USB) by default for MTCDTJohn Klug1
2022-01-11Do not create extra file in /var/config for rs9113 reset. Use dmesgJohn Klug1
2022-01-11Improve logging in /etc/init.d/rs9113John Klug1
2022-01-11Add logging to evaluate rs9113 initializationJohn Klug1
2022-01-11Remove possible extra reset of rs9113John Klug1
2022-01-11User /etc/init.d/rs9113 reset in /etc/init.d/rs9113-resetJohn Klug2
2022-01-11Add rs9113-reset package for mPower to reset rs9113John Klug3
2022-01-11cd-gpio is on pioA 1 (or gpio0 pin 1)John Klug1
2022-01-11Enable XMIT and RCV in all cases when setting RS485 with Atmel serial - adapt...Serhii Voloshynov1
2022-01-11Enable XMIT and RCV in all cases when setting RS485 with Atmel serialJohn Klug1
2022-01-11Disable CRTSCTS when setting RS485 half duplex to match Vizzini driver - adap...Serhii Voloshynov2
2022-01-11Disable CRTSCTS when setting RS485 half duplex to match Vizzini driverJohn Klug2
2022-01-11Make sure mts-io is done loading, make sure loops break outJohn Klug1
2022-01-11Remove i2c debug to prevent new I/O expander debug - kernel 5.4Serhii Voloshynov1
2022-01-11Remove i2c debug to prevent new I/O expander debugJohn Klug1
2022-01-11New rs9113-from-src for building rs9113John Klug1
2022-01-11Wait for USB, not the interrupt pin which is too earlyJohn Klug1
2022-01-11Add a reset loop in case rs9113 does not appear on USB HubJohn Klug2
2022-01-11Fix pincontrol for io controllers, rs9113, usbhub resets - migrate changes fo...Serhii Voloshynov1
2022-01-11Fix pincontrol for io controllers, rs9113, usbhub resetsSerhii Voloshynov2
2022-01-07Added gpio export by namesharma-mts2
2021-11-30Update mtcdt.dts for MTCDT-0.2Andrii Pientsov3
2021-11-22Reserve 5 bit serial for multidrop in Atmel Serial driver. Kernel 5.4.81Andrii Pientsov2
2021-11-22Add PCA953X driver to kernel 5.4.81 for MTCDT-0.2Andrii Pientsov1
2021-11-18Remove patch from recipe that is in meta-rs9113John Klug1
2021-11-18Turn off debug in the RS9113 driver due to too many warningsJohn Klug2
2021-11-18Remove support for IRQ because our I/O expander does not have thisJohn Klug1
2021-11-18Cannot use same stanza names at at91sam9x5cm.dtsi or partition order is incor...John Klug1
2021-11-18Device tree updates for MTCDT-0.2 and OverlayJohn Klug4
2021-11-18output-high and output-low are ignored by pinctrl_at91 driverJohn Klug1
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-12 01:12:37 +0000