summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2019-03-19rs9113-autostart depends on rs9113-noarchJohn Klug1
2019-03-19rs9113 startup moved to package rs9113-autostartJohn Klug3
2019-03-18rs9113 package arch updates (all, arm926ejste)John Klug1
2019-03-08Bump the version of rs9113 package to correspond to driver patchJohn Klug2
2019-03-04Create routine in mts-io init script to load device tree.John Klug1
2019-03-04mt-dt-overlay to test overlaysJohn Klug2
2019-03-04All LTE MTR types can user B18 as the PPS signalJohn Klug1
2019-03-04Change pps to pps-0 in device tree to allow for multiple entries.John Klug1
2019-03-01Add rising edge IRQ to Murata - this is required for proper interruptMike Nicholson1
handling.
2019-03-01Use timing from previous software iterations.Mike Nicholson1
2019-02-28Use latest firmwareJohn Klug4
2019-02-27Bump mts-io revision for new file /var/run/config/gpstypeJohn Klug1
2019-02-27Add new file /var/run/config/gpstypeJohn Klug1
2019-02-27Enable/disable murata in wl12xx SDIO driver; deglitch, remove pull-downMike Nicholson3
on IRQ (to match current production)
2019-02-27mLinux wl12xx functionality will be minimal, for testing and calibration onlyJohn Klug3
2019-02-26Security enhancement (ASLR) : Disable CONFIG_COMPAT_BRK so that ↵Jeff Hatch1
randomize_va_space set to 2 by default
2019-02-22Make it clear why there are two PPS pins definedJohn Klug1
2019-02-22Add the TI wifi stuff to Linux4John Klug13
2019-02-22Add PPS for MTRV1-0.0 and MTRV1-0.1John Klug1
2019-02-22Add the DT Overlay patch to kernel for MTRV1John Klug1
2019-02-22Change PACKAGE_ARCH, since overlays are machine dependent.John Klug1
2019-02-21Move the overlay directory to where the dtoverlay command expects.John Klug1
2019-02-21Recipe for dtc, and fix dtoverlay recipe to use the libfdt library.John Klug2
2019-02-20Add dtoverlay command -- libdft comes laterJohn Klug2
2019-02-19Only MTRV1-0.0 of MTRV1 Uses /dev/ttyS1John Klug2
2019-02-19Set /dev/gps0, even if gps capability flag is false.John Klug1
2019-02-18Allow CONFIG to be set externally.John Klug1
2019-02-15Add DMA to dbgu (not on uart0)Mike Nicholson1
2019-02-15Remove bt_transmit from the rs9113-utils file list, since it is not there ↵John Klug1
anyway.
2019-02-14Remove old u-boot inc file.John Klug1
2019-02-14Remove wpa_supplicant init script from rs9113-noarch, and simplify recipe.John Klug3
2019-02-14Add a couple jiffies of slack in the PMECCERRLOCMike Nicholson2
2019-02-13DMA for dbgu on MTCDT, and MTCAP (MTCAP requires testing)Mike Nicholson2
2019-02-13Split off seldom used rs9113 driver filesJohn Klug3
2019-02-13Silent boot patch broke the context for the mtr and mtrv1 I2C removal patchesJohn Klug2
2019-02-12Bump revision for silent console feature.John Klug1
2019-02-12u-boot: hide u-boot version string for security reasonsMykyta Dorokhin2
2019-02-12u-boot: enable silent console featureMykyta Dorokhin3
2019-02-12Bump the rs9113 preferred version to 1.6.1John Klug4
2019-02-12New rs9113 driver for Linux versions up to 4.14John Klug2
2019-02-11Remove FPGA hex for LoRa from MTRJohn Klug1
2019-02-07Enable DMA on dbgu serial (fixes overrun issue)Mike Nicholson1
2019-02-07Add DMA to uart0, delete m25p80Mike Nicholson1
2019-02-07Add mts-io/John's radio reset, remove m25p80, remove 16-bit nand, streamline ↵Mike Nicholson1
uart0 DMA
2019-02-06Use DMA for Venus on gps0/ttyS1, get Venus workingMike Nicholson1
2019-02-05Remove perl dependencyJohn Klug3
2019-02-05Pull down for radio monitor on mtrv1John Klug1
2019-02-01Original MTR, initial revisionMike3
2019-01-31Pins must be set from a driver. Tie the radio pins to the MTS-IO driver.John Klug1
2019-01-30PD21 should be pull down, remove conflicting unused NAND.John Klug1
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-29 00:19:09 +0000