| Age | Commit message (Expand) | Author | Files |
|---|
| 2021-12-09 | Improve logging in /etc/init.d/rs9113 | John Klug | 1 |
| 2021-12-09 | Add logging to evaluate rs9113 initialization | John Klug | 1 |
| 2021-12-08 | Remove possible extra reset of rs9113 | John Klug | 1 |
| 2021-12-08 | User /etc/init.d/rs9113 reset in /etc/init.d/rs9113-reset | John Klug | 2 |
| 2021-12-08 | Add rs9113-reset package for mPower to reset rs9113 | John Klug | 3 |
| 2021-12-06 | cd-gpio is on pioA 1 (or gpio0 pin 1) | John Klug | 1 |
| 2021-11-30 | Enable XMIT and RCV in all cases when setting RS485 with Atmel serial | John Klug | 1 |
| 2021-11-29 | Disable CRTSCTS when setting RS485 half duplex to match Vizzini driver | John Klug | 2 |
| 2021-11-23 | Make sure mts-io is done loading, make sure loops break out | John Klug | 1 |
| 2021-11-23 | Remove i2c debug to prevent new I/O expander debug | John Klug | 1 |
| 2021-11-23 | New rs9113-from-src for building rs9113 | John Klug | 1 |
| 2021-11-22 | Wait for USB, not the interrupt pin which is too early | John Klug | 1 |
| 2021-11-22 | Add a reset loop in case rs9113 does not appear on USB Hub | John Klug | 2 |
| 2021-11-22 | Fix pincontrol for io controllers, rs9113, usbhub resets | John Klug | 4 |
| 2021-11-15 | Remove support for IRQ because our I/O expander does not have this | John Klug | 1 |
| 2021-11-15 | Cannot use same stanza names at at91sam9x5cm.dtsi or partition order is incor... | John Klug | 1 |
| 2021-11-15 | Device tree updates for MTCDT-0.2 and Overlay | John Klug | 4 |
| 2021-11-15 | set PREFERRED_VERSION_rs9113 to 1.6.5 | Serhii Voloshynov | 4 |
| 2021-11-15 | Remove patch from recipe that is in meta-rs9113 | John Klug | 1 |
| 2021-11-15 | output-high and output-low are ignored by pinctrl_at91 driver | John Klug | 1 |
| 2021-11-15 | Resets for new GPIO controllers | John Klug | 1 |
| 2021-11-15 | Add patch for multidrop serial to match Vizzini driver | John Klug | 1 |
| 2021-11-15 | Turn off debug in the RS9113 driver due to too many warnings | John Klug | 3 |
| 2021-11-15 | Add dummy regulator to make gpio expander driver happy | John Klug | 1 |
| 2021-11-15 | Call the new PCA9557 parts gpio4 and gpio5 | John Klug | 1 |
| 2021-11-15 | Print a message to the log when setting multidrop | John Klug | 1 |
| 2021-11-15 | r15 kernel was not yet released, so use r15 | John Klug | 1 |
| 2021-11-15 | Reserve 5 bit serial for multidrop in Atmel Serial driver | John Klug | 2 |
| 2021-11-15 | Add new GPIO expander | John Klug | 1 |
| 2021-11-15 | Add PCA953X driver to kernel for MTCDT-0.2 | John Klug | 1 |
| 2021-09-28 | Have the Atmel serial driver pick the dma channelmPower-5.3.6 | John Klug | 1 |
| 2021-09-23 | ttyS4, external serial port, must be by default disabled | John Klug | 1 |
| 2021-09-23 | Fix DMA for external serial port on MTRV1-0.4 | John Klug | 2 |
| 2021-09-20 | Add mtrv1 ttl script | John Klug | 2 |
| 2021-09-16 | Random MAC for EEPROM not written to yet | John Klug | 2 |
| 2021-09-10 | Add DMA to GNSS and External Serial | John Klug | 1 |
| 2021-09-09 | The 5.3.x branch is for mLinux >5.3.0 and <6.0.0 | John Klug | 1 |
| 2021-09-03 | Fix device tree for MTRV1-0.4 and bump kernel version | John Klug | 2 |
| 2021-09-03 | Move to new Red compatible rs9113 driver | John Klug | 2 |
| 2021-03-26 | Unconditionally load the tmp102 driver on MTCAP images | John Klug | 1 |
| 2021-01-26 | r13 and r12 are twins, except disabled GPS was added for MTCDTIP2 | John Klug | 1 |
| 2021-01-19 | softdog is in the main recipe | John Klug | 1 |
| 2021-01-18 | softdog needs to load automatically, when installed | John Klug | 1 |
| 2021-01-06 | Move README to Thud | John Klug | 1 |
| 2021-01-06 | SRCREV must be set to PV for mtac cards and rs9113 | John Klug | 2 |
| 2021-01-06 | AUTOREV breaks mLinux source tarball in Thud (uses git) | John Klug | 2 |
| 2021-01-04 | Add softdog to the feeds (no images) | John Klug | 3 |
| 2020-11-11 | Missing RDEPENDS in recipe | John Klug | 1 |
| 2020-10-19 | Remove more debug from i2c-at91, and add "a" to the revision of atmel-mci | John Klug | 2 |
| 2020-10-15 | Add Cell-LDO-Enable pin to bootstrap | John Klug | 2 |
