Age | Commit message (Expand) | Author | Files |
2021-12-29 | Wait for USB, not the interrupt pin which is too early | John Klug | 1 |
2021-12-29 | Add a reset loop in case rs9113 does not appear on USB Hub | John Klug | 2 |
2021-12-29 | Fix pincontrol for io controllers, rs9113, usbhub resets | John Klug | 4 |
2021-12-29 | Remove support for IRQ because our I/O expander does not have this | John Klug | 1 |
2021-12-29 | Cannot use same stanza names at at91sam9x5cm.dtsi or partition order is incor... | John Klug | 1 |
2021-12-29 | Device tree updates for MTCDT-0.2 and Overlay | John Klug | 4 |
2021-12-29 | set PREFERRED_VERSION_rs9113 to 1.6.5 | Serhii Voloshynov | 4 |
2021-12-29 | Remove patch from recipe that is in meta-rs9113 | John Klug | 1 |
2021-12-29 | output-high and output-low are ignored by pinctrl_at91 driver | John Klug | 1 |
2021-12-29 | Resets for new GPIO controllers | John Klug | 1 |
2021-12-29 | Add patch for multidrop serial to match Vizzini driver | John Klug | 1 |
2021-12-29 | Turn off debug in the RS9113 driver due to too many warnings | John Klug | 3 |
2021-12-29 | Add dummy regulator to make gpio expander driver happy | John Klug | 1 |
2021-12-29 | Call the new PCA9557 parts gpio4 and gpio5 | John Klug | 1 |
2021-12-29 | Print a message to the log when setting multidrop | John Klug | 1 |
2021-12-29 | r15 kernel was not yet released, so use r15 | John Klug | 1 |
2021-12-29 | Reserve 5 bit serial for multidrop in Atmel Serial driver | John Klug | 2 |
2021-12-29 | Add new GPIO expander | John Klug | 1 |
2021-12-29 | Add PCA953X driver to kernel for MTCDT-0.2 | John Klug | 1 |
2021-12-29 | Have the Atmel serial driver pick the dma channel | John Klug | 1 |
2021-12-29 | ttyS4, external serial port, must be by default disabled | John Klug | 1 |
2021-12-29 | Fix DMA for external serial port on MTRV1-0.4 | John Klug | 2 |
2021-12-29 | Add mtrv1 ttl script | John Klug | 2 |
2021-12-29 | Random MAC for EEPROM not written to yet | John Klug | 2 |
2021-12-29 | Add DMA to GNSS and External Serial | John Klug | 1 |
2021-12-29 | The 5.3.x branch is for mLinux >5.3.0 and <6.0.0 | John Klug | 1 |
2021-12-29 | Fix device tree for MTRV1-0.4 and bump kernel version | John Klug | 2 |
2021-12-29 | Move to new Red compatible rs9113 driver | John Klug | 2 |
2021-06-23 | Add Cell-LDO-Enable pin to bootstrap5.3.5 | John Klug | 1 |
2021-06-23 | Unconditionally load the tmp102 driver on MTCAP images | John Klug | 1 |
2021-06-23 | r13 and r12 are twins, except disabled GPS was added for MTCDTIP2 | John Klug | 1 |
2021-06-23 | softdog is in the main recipe | John Klug | 1 |
2021-06-23 | softdog needs to load automatically, when installed | John Klug | 1 |
2021-06-23 | Add softdog to the feeds (no images) | John Klug | 3 |
2021-06-23 | Remove more debug from i2c-at91, and add "a" to the revision of atmel-mci | John Klug | 1 |
2021-06-23 | atmel-mci patch for Linux | John Klug | 2 |
2021-06-23 | Correct issues with the kernel device tree patch, and the version of at91boot... | John Klug | 3 |
2021-06-23 | Fix up GNSS for MTCDTIP2 | John Klug | 2 |
2021-06-23 | Move mtac to meta-multiech | John Klug | 7 |
2021-06-23 | Moved to meta-multitech | John Klug | 1 |
2021-06-23 | Add Cell-LDO-Enable pin to bootstrap | John Klug | 2 |
2021-06-23 | ETH-RESET must be high when MACB driver loads, UART-TX-GNSS must be PERIPH C | John Klug | 1 |
2021-06-23 | Remove mts-io and mt-dt-overlay, which are not MACHINE dependent | John Klug | 11 |
2021-06-23 | Add changes for mtcap2/mtcdtip2 | John Klug | 8 |
2021-01-05 | SRCREV must be set to PV for mtac cards and rs91135.3.0d | John Klug | 4 |
2021-01-05 | AUTOREV breaks mLinux source tarball in Thud (uses git)5.3.0c | John Klug | 4 |
2020-12-08 | Missing RDEPENDS in recipe | John Klug | 1 |
2020-11-11 | Add new BSP submodule for Atmel Processors.5.3.0b5.3.0a | John Klug | 194 |