summaryrefslogtreecommitdiff
AgeCommit message (Expand)AuthorFiles
2022-01-05Hold rs9113 in reset until after USB Hub is ready5.3.26John Klug2
2021-12-29Remove branch reference5.3.25John Klug1
2021-12-29Set EHCI (High Speed USB) by default for MTCDTJohn Klug1
2021-12-29Disable EHCI (High Speed USB) by default for MTCDTJohn Klug1
2021-12-29Do not create extra file in /var/config for rs9113 reset. Use dmesgJohn Klug1
2021-12-29Improve logging in /etc/init.d/rs9113John Klug1
2021-12-29Add logging to evaluate rs9113 initializationJohn Klug1
2021-12-29Remove possible extra reset of rs9113John Klug1
2021-12-29User /etc/init.d/rs9113 reset in /etc/init.d/rs9113-resetJohn Klug2
2021-12-29Add rs9113-reset package for mPower to reset rs9113John Klug3
2021-12-29cd-gpio is on pioA 1 (or gpio0 pin 1)John Klug1
2021-12-29Enable XMIT and RCV in all cases when setting RS485 with Atmel serialJohn Klug1
2021-12-29Disable CRTSCTS when setting RS485 half duplex to match Vizzini driverJohn Klug2
2021-12-29Make sure mts-io is done loading, make sure loops break outJohn Klug1
2021-12-29Remove i2c debug to prevent new I/O expander debugJohn Klug1
2021-12-29New rs9113-from-src for building rs9113John Klug1
2021-12-29Wait for USB, not the interrupt pin which is too earlyJohn Klug1
2021-12-29Add a reset loop in case rs9113 does not appear on USB HubJohn Klug2
2021-12-29Fix pincontrol for io controllers, rs9113, usbhub resetsJohn Klug4
2021-12-29Remove support for IRQ because our I/O expander does not have thisJohn Klug1
2021-12-29Cannot use same stanza names at at91sam9x5cm.dtsi or partition order is incor...John Klug1
2021-12-29Device tree updates for MTCDT-0.2 and OverlayJohn Klug4
2021-12-29set PREFERRED_VERSION_rs9113 to 1.6.5Serhii Voloshynov4
2021-12-29Remove patch from recipe that is in meta-rs9113John Klug1
2021-12-29output-high and output-low are ignored by pinctrl_at91 driverJohn Klug1
2021-12-29Resets for new GPIO controllersJohn Klug1
2021-12-29Add patch for multidrop serial to match Vizzini driverJohn Klug1
2021-12-29Turn off debug in the RS9113 driver due to too many warningsJohn Klug3
2021-12-29Add dummy regulator to make gpio expander driver happyJohn Klug1
2021-12-29Call the new PCA9557 parts gpio4 and gpio5John Klug1
2021-12-29Print a message to the log when setting multidropJohn Klug1
2021-12-29r15 kernel was not yet released, so use r15John Klug1
2021-12-29Reserve 5 bit serial for multidrop in Atmel Serial driverJohn Klug2
2021-12-29Add new GPIO expanderJohn Klug1
2021-12-29Add PCA953X driver to kernel for MTCDT-0.2John Klug1
2021-12-29Have the Atmel serial driver pick the dma channelJohn Klug1
2021-12-29ttyS4, external serial port, must be by default disabledJohn Klug1
2021-12-29Fix DMA for external serial port on MTRV1-0.4John Klug2
2021-12-29Add mtrv1 ttl scriptJohn Klug2
2021-12-29Random MAC for EEPROM not written to yetJohn Klug2
2021-12-29Add DMA to GNSS and External SerialJohn Klug1
2021-12-29The 5.3.x branch is for mLinux >5.3.0 and <6.0.0John Klug1
2021-12-29Fix device tree for MTRV1-0.4 and bump kernel versionJohn Klug2
2021-12-29Move to new Red compatible rs9113 driverJohn Klug2
2021-06-23Add Cell-LDO-Enable pin to bootstrap5.3.5John Klug1
2021-06-23Unconditionally load the tmp102 driver on MTCAP imagesJohn Klug1
2021-06-23r13 and r12 are twins, except disabled GPS was added for MTCDTIP2John Klug1
2021-06-23softdog is in the main recipeJohn Klug1
2021-06-23softdog needs to load automatically, when installedJohn Klug1
2021-06-23Add softdog to the feeds (no images)John Klug3