4 files changed, 184 insertions, 0 deletions
diff --git a/conf/machine/mtcap.conf b/conf/machine/mtcap.conf
new file mode 100644
index 0000000..01c508b
--- /dev/null
+++ b/conf/machine/mtcap.conf
@@ -0,0 +1,45 @@
+#@TYPE: Machine
+#@Name: MTCAP
+#@DESCRIPTION: Machine configuration for the MTCAP hardware
+
+require conf/machine/include/tune-arm926ejs.inc
+
+MACHINE_FEATURES = "ext2 ext3 usbhost usbgadget ppp"
+PREFERRED_PROVIDER_virtual/kernel = "linux-at91"
+PREFERRED_VERSION_linux = "4.9.%"
+
+# No EXAR chip present on an MTCAP
+
+DEFAULTTUNE = "arm926ejs"
+TUNE_CCARGS = " -march=armv5te -marm -mthumb-interwork -mtune=arm926ej-s"
+TUNE_FEATURES = "arm armv5 thumb dsp arm926ejs"
+ARMPKGSFX_THUMB="t"
+
+# used by sysvinit_2
+SERIAL_CONSOLES = "115200;ttyS0"
+#don't try to access tty1
+USE_VT = "0"
+
+UBOOT_MACHINE = "at91sam9x5ek_nandflash_config"
+PREFERRED_VERSION_u-boot = "2016.09.01"
+
+AT91BOOTSTRAP_BOARD = "at91sam9x5eknf_uboot"
+PREFERRED_VERSION_at91bootstrap = "3.8.12"
+
+KERNEL_IMAGETYPE = "uImage"
+# remove kernel-image from rootfs by overriding kernel-base DEPS
+RDEPENDS_kernel-base = ""
+
+EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"
+
+IMAGE_FSTYPES =+ "jffs2 tar.gz"
+EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pagesize=0x800 -n"
+
+UBOOT_ENTRYPOINT = "0x20008000"
+UBOOT_LOADADDRESS = "0x20008000"
+
+PREFERRED_VERSION_rs9113 = '1.6.1'
+
+PRINC ?= "0"
+
+PACKAGECONFIG_append_pn-boost = " python"
diff --git a/conf/machine/mtcdt.conf b/conf/machine/mtcdt.conf
new file mode 100644
index 0000000..30761df
--- /dev/null
+++ b/conf/machine/mtcdt.conf
@@ -0,0 +1,46 @@
+#@TYPE: Machine
+#@Name: Multi-Tech MTCDT
+#@DESCRIPTION: Machine configuration for the MultiConnect Conduit MTCDT hardware
+
+require conf/machine/include/tune-arm926ejs.inc
+
+MACHINE_FEATURES = "ext2 ext3 usbhost usbgadget ppp"
+PREFERRED_PROVIDER_virtual/kernel = "linux-at91"
+PREFERRED_VERSION_linux = "4.9.%"
+
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "kernel-module-vizzini"
+PREFERRED_VERSION_kernel-module-vizzini ?= "1.1"
+
+DEFAULTTUNE = "arm926ejs"
+TUNE_CCARGS = " -march=armv5te -marm -mthumb-interwork -mtune=arm926ej-s"
+TUNE_FEATURES = "arm armv5 thumb dsp arm926ejs"
+ARMPKGSFX_THUMB="t"
+
+# used by sysvinit_2
+SERIAL_CONSOLES = "115200;ttyS0"
+#don't try to access tty1
+USE_VT = "0"
+
+UBOOT_MACHINE = "at91sam9x5ek_nandflash_config"
+PREFERRED_VERSION_u-boot = "2016.09.01"
+
+AT91BOOTSTRAP_BOARD = "at91sam9x5eknf_uboot"
+PREFERRED_VERSION_at91bootstrap = "3.8.12"
+
+KERNEL_IMAGETYPE = "uImage"
+# remove kernel-image from rootfs by overriding kernel-base DEPS
+RDEPENDS_kernel-base = ""
+
+EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"
+
+IMAGE_FSTYPES =+ "jffs2 tar.gz"
+EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pagesize=0x800 -n"
+
+UBOOT_ENTRYPOINT = "0x20008000"
+UBOOT_LOADADDRESS = "0x20008000"
+
+PREFERRED_VERSION_rs9113 = '1.6.1'
+
+PRINC ?= "0"
+
+PACKAGECONFIG_append_pn-boost = " python"
diff --git a/conf/machine/mtr.conf b/conf/machine/mtr.conf
new file mode 100644
index 0000000..e5c68e5
--- /dev/null
+++ b/conf/machine/mtr.conf
@@ -0,0 +1,47 @@
+#@TYPE: Machine
+#@Name: Multi-Tech MTCDT
+#@DESCRIPTION: Machine configuration for the MTR hardware
+
+require conf/machine/include/tune-arm926ejs.inc
+
+MACHINE_FEATURES = "ext2 ext3 usbhost usbgadget ppp"
+PREFERRED_PROVIDER_virtual/kernel = "linux-at91"
+PREFERRED_VERSION_linux = "4.9.%"
+
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "kernel-module-vizzini"
+PREFERRED_VERSION_kernel-module-vizzini ?= "1.1"
+
+DEFAULTTUNE = "arm926ejs"
+TUNE_CCARGS = " -march=armv5te -marm -mthumb-interwork -mtune=arm926ej-s"
+TUNE_FEATURES = "arm armv5 thumb dsp arm926ejs"
+ARMPKGSFX_THUMB="t"
+
+# used by sysvinit_2
+SERIAL_CONSOLES = "115200;ttyS0"
+#don't try to access tty1
+USE_VT = "0"
+
+UBOOT_MACHINE = "at91sam9x5ek_nandflash_config"
+PREFERRED_VERSION_u-boot = "2016.09.01"
+
+AT91BOOTSTRAP_BOARD = "at91sam9x5eknf_uboot"
+PREFERRED_VERSION_at91bootstrap = "3.8.12"
+
+KERNEL_IMAGETYPE = "uImage"
+# remove kernel-image from rootfs by overriding kernel-base DEPS
+RDEPENDS_kernel-base = ""
+
+EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"
+
+IMAGE_FSTYPES =+ "jffs2 tar.gz"
+EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pagesize=0x800 -n"
+
+UBOOT_ENTRYPOINT = "0x20008000"
+UBOOT_LOADADDRESS = "0x20008000"
+
+# No rs9113 for mtr
+PREFERRED_VERSION_rs9113 = '1.6.1'
+
+PRINC ?= "0"
+
+PACKAGECONFIG_append_pn-boost = " python"
diff --git a/conf/machine/mtrv1.conf b/conf/machine/mtrv1.conf
new file mode 100644
index 0000000..e350664
--- /dev/null
+++ b/conf/machine/mtrv1.conf
@@ -0,0 +1,46 @@
+#@TYPE: Machine
+#@Name: Multi-Tech MTCDT
+#@DESCRIPTION: Machine configuration for the MTRv1 hardware
+
+require conf/machine/include/tune-arm926ejs.inc
+
+MACHINE_FEATURES = "ext2 ext3 usbhost usbgadget ppp"
+PREFERRED_PROVIDER_virtual/kernel = "linux-at91"
+PREFERRED_VERSION_linux = "4.9.%"
+
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "kernel-module-vizzini"
+PREFERRED_VERSION_kernel-module-vizzini ?= "1.1"
+
+DEFAULTTUNE = "arm926ejs"
+TUNE_CCARGS = " -march=armv5te -marm -mthumb-interwork -mtune=arm926ej-s"
+TUNE_FEATURES = "arm armv5 thumb dsp arm926ejs"
+ARMPKGSFX_THUMB="t"
+
+# used by sysvinit_2
+SERIAL_CONSOLES = "115200;ttyS0"
+#don't try to access tty1
+USE_VT = "0"
+
+UBOOT_MACHINE = "at91sam9x5ek_nandflash_config"
+PREFERRED_VERSION_u-boot = "2016.09.01"
+
+AT91BOOTSTRAP_BOARD = "at91sam9x5eknf_uboot"
+PREFERRED_VERSION_at91bootstrap = "3.8.12"
+
+KERNEL_IMAGETYPE = "uImage"
+# remove kernel-image from rootfs by overriding kernel-base DEPS
+RDEPENDS_kernel-base = ""
+
+EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot"
+
+IMAGE_FSTYPES =+ "jffs2 tar.gz"
+EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --pagesize=0x800 -n"
+
+UBOOT_ENTRYPOINT = "0x20008000"
+UBOOT_LOADADDRESS = "0x20008000"
+
+PREFERRED_VERSION_rs9113 = '1.6.1'
+
+PRINC ?= "0"
+
+PACKAGECONFIG_append_pn-boost = " python"