linux 5.4: apply mtcdt DTS changes

1 files changed, 203 insertions, 169 deletions

diff --git a/recipes-kernel/linux/linux-at91-5.4.81/mts-dts/mtcdt.dts b/recipes-kernel/linux/linux-at91-5.4.81/mts-dts/mtcdt.dts
index 6a1ba37..7273af7 100644
--- a/recipes-kernel/linux/linux-at91-5.4.81/mts-dts/mtcdt.dts
+++ b/recipes-kernel/linux/linux-at91-5.4.81/mts-dts/mtcdt.dts
@@ -20,7 +20,7 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	model = "Atmel AT91SAM9X5-EK";
+	model = "Multi-Tech Systems MTCDT";
 	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 	interrupt-parent = <&aic>;
 
@@ -35,15 +35,12 @@
 		gpio3 = &pioD;
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
 		ssc0 = &ssc0;
 		pwm0 = &pwm0;
 	};
 
 	chosen {
-		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "mem=256M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -87,21 +84,6 @@
 		reg = <0x00300000 0x8000>;
 	};
 
-	sound {
-		compatible = "atmel,sam9x5-wm8731-audio";
-
-		atmel,model = "wm8731 @ AT91SAM9X5EK";
-
-		atmel,audio-routing =
-			"Headphone Jack", "RHPOUT",
-			"Headphone Jack", "LHPOUT",
-			"LLINEIN", "Line In Jack",
-			"RLINEIN", "Line In Jack";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8731>;
-	};
-
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -329,32 +311,20 @@
 				ebi {
 					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
 						atmel,pins =
-							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_ebi_addr_nand: ebi-addr-0 {
 						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 				};
 
@@ -469,13 +439,13 @@
 				nand {
 					pinctrl_nand_oe_we: nand-oe-we-0 {
 						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_nand_rb: nand-rb-0 {
 						atmel,pins =
-							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+							<AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_nand_cs: nand-cs-0 {
@@ -484,6 +454,28 @@
 					};
 				};
 
+				mts-io {
+					    pinctrl_mts_io_out: mts_io-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP    /* PD14 WiFi BT reset */
+							AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP     /* PD16 Secure reset */
+							AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP     /* PD17 MTQ reset */
+							AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;   /* PD18 USB Hub reset */
+							output-high;
+					    };
+					    pinctrl_mts_io_in: mts_io-1 {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP   /* PD19 GNSS Int */
+							 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;   /* PD20 WiFi_BT_LPMode Input */
+						};
+					    pinctrl_mts_io_gnss: mts_io-2 {
+						atmel,pins =
+						     <AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP      /* PC16 ETH_NRST */
+						     AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;   /* PD15 N_GNSS_RESET */
+						     output-low;
+					    };
+				};
+
 				mmc0 {
 					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 						atmel,pins =
@@ -501,7 +493,7 @@
 
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
-							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+							<AT91_PIOA 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA1 gpio SD card pin pull up and deglitch */
 					};
 				};
 
@@ -519,11 +511,6 @@
 							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA3 periph B with pullup */
 							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA4 periph B with pullup */
 					};
-
-					pinctrl_board_mmc1: mmc1-board {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
-					};
 				};
 
 				usb2 {
@@ -813,7 +800,9 @@
 				pinctrl-0 = <&pinctrl_macb0_rmii>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
 				clock-names = "hclk", "pclk";
-				status = "disabled";
+
+				phy-mode = "rmii";
+				status = "okay";
 			};
 
 			ssc0: ssc@f0010000 {
@@ -828,7 +817,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 				clock-names = "pclk";
 
-				status = "okay";
+				status = "disabled";
 			};
 
 			mmc0: mmc@f0008000 {
@@ -848,11 +837,11 @@
 					&pinctrl_mmc0_slot0_clk_cmd_dat0
 					&pinctrl_mmc0_slot0_dat1_3>;
 				status = "okay";
-
+				/* external micro SD slot */
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+					cd-gpios = <&pioA 1 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -867,19 +856,7 @@
 				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
-
-
-				pinctrl-0 = <
-					&pinctrl_board_mmc1
-					&pinctrl_mmc1_slot0_clk_cmd_dat0
-					&pinctrl_mmc1_slot0_dat1_3>;
-				status = "okay";
-
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
-				};
+				status = "disabled";
 			};
 
 			dbgu: serial@fffff200 {
@@ -893,8 +870,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
-
 				status = "okay";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
 			};
 
 			usart0: serial@f801c000 {
@@ -908,10 +886,7 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "usart";
-
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
+				status = "disabled";
 			};
 
 			usart1: serial@f8020000 {
@@ -956,55 +931,6 @@
 				status = "disabled";
 			};
 
-			i2c0: i2c@f8010000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8010000 0x100>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
-				       <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
-				status = "okay";
-				wm8731: wm8731@1a {
-					compatible = "wm8731";
-					reg = <0x1a>;
-				};
-			};
-
-			i2c1: i2c@f8014000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8014000 0x100>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
-				       <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@f8018000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8018000 0x100>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
-				       <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
-				status = "disabled";
-			};
-
 			uart0: serial@f8040000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8040000 0x200>;
@@ -1013,7 +939,9 @@
 				pinctrl-0 = <&pinctrl_uart0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "usart";
-				status = "disabled";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
 			};
 
 			uart1: serial@f8044000 {
@@ -1045,10 +973,6 @@
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
 
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-				status = "okay";
-
 				trigger0 {
 					trigger-name = "external-rising";
 					trigger-value = <0x1>;
@@ -1073,6 +997,7 @@
 				};
 			};
 
+			/* runs to Accessory Port 1 */
 			spi0: spi@f0000000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1087,16 +1012,27 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 
-				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				status = "disabled"; /* conflicts with mmc1 */
+				status = "okay";
+				cs-gpios = <&pioA 4 0>, <&pioA 2 0>, <&pioA 3 0>, <&pioA 5 0>;
 
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
+				ap1-dout@1 {
+				    compatible = "mts-io-ap1-dout";
+				    spi-max-frequency = <1000000>;
+				    reg = <1>;
+				};
+				ap1-spi@2 {
+				    compatible = "mts,mtac";
+				    spi-max-frequency = <2000000>;
+				    reg = <2>;
+				};
+				ap1-din@3 {
+				    compatible = "mts-io-ap1-din";
+				    spi-max-frequency = <1000000>;
+				    reg = <3>;
 				};
 			};
 
+			/* runs to Accessory Port 2 */
 			spi1: spi@f0004000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1110,7 +1046,29 @@
 				pinctrl-0 = <&pinctrl_spi1>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "spi_clk";
-				status = "disabled";
+
+				status = "okay";
+				cs-gpios = <&pioC 15 0>, <&pioC 16 0>, <&pioC 17 0>, <&pioC 18 0>;
+				ap2-adc@0 {
+				    compatible = "mts-io-ap2-adc";
+				    spi-max-frequency = <20000000>;
+				    reg = <0>;
+				};
+				ap2-dout@1 {
+				    compatible = "mts-io-ap2-dout";
+				    spi-max-frequency = <1000000>;
+				    reg = <1>;
+				};
+				ap2-spi@2 {
+				    compatible = "mts,mtac";
+				    spi-max-frequency = <2000000>;
+				    reg = <2>;
+				};
+				ap2-din@3 {
+				    compatible = "mts-io-ap2-din";
+				    spi-max-frequency = <1000000>;
+				    reg = <3>;
+				};
 			};
 
 			usb2: gadget@f803c000 {
@@ -1126,7 +1084,6 @@
 
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_board_usb2>;
-				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 
 				ep@0 {
@@ -1221,10 +1178,11 @@
 			clock-names = "ohci_clk", "hclk", "uhpck";
 
 			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
-					   &pioD 19 GPIO_ACTIVE_LOW
-					   &pioD 20 GPIO_ACTIVE_LOW
-					  >;
+			//mtcdt: no vbus-gpio
+			//atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+			//		   &pioD 19 GPIO_ACTIVE_LOW
+			//		   &pioD 20 GPIO_ACTIVE_LOW
+			//		  >;
 			status = "okay";
 		};
 
@@ -1275,13 +1233,13 @@
 
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+					rb-gpios = <&pioC 31 GPIO_ACTIVE_HIGH>;
 					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "hw";
-					nand-ecc-strength = <2>;
+					nand-ecc-strength = <4>;
 					nand-ecc-step-size = <512>;
-					nand-on-flash-bbt;
+					/* nand-on-flash-bbt; */
 					label = "atmel_nand";
 
 					partitions {
@@ -1289,39 +1247,54 @@
 						#address-cells = <1>;
 						#size-cells = <1>;
 
+						nand@0 {
+							label = "NANDFlash";
+							reg = <0x0 0x10000000>;
+						};
+
 						at91bootstrap@0 {
 							label = "at91bootstrap";
 							reg = <0x0 0x40000>;
 						};
 
 						uboot@40000 {
-							label = "u-boot";
-							reg = <0x40000 0xc0000>;
+							label = "u-Boot";
+							reg = <0x40000 0x80000>;
 						};
-
-						ubootenvred@100000 {
-							label = "U-Boot Env Redundant";
-							reg = <0x100000 0x40000>;
+					
+						ubootconfig0@c0000 {
+							label = "u-Boot Config";
+							reg = <0xc0000 0xa0000>;
+						};
+					
+						ubootconfig1@160000 {
+							label = "u-Boot Redundant Config";
+							reg = <0x160000 0xa0000>;
+						};
+					
+						uImage@200000 {
+							label = "uImage";
+							reg = <0x200000 0x600000>;
 						};
 
-						ubootenv@140000 {
-							label = "U-Boot Env";
-							reg = <0x140000 0x40000>;
+						config0@800000 {
+							label = "Config";
+							reg = <0x800000 0x800000>;
 						};
 
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
+						config1@1000000 {
+							label = "OEM Config";
+							reg = <0x1000000 0x800000>;
 						};
 
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
+						rootfs@1800000 {
+							label = "Rootfs";
+							reg = <0x1800000 0x8000000>;
 						};
 
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
+						user@9800000 {
+							label = "User data";
+							reg = <0x9800000 0x6800000>;
 						};
 					};
 				};
@@ -1341,7 +1314,22 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio0>;
-		status = "disabled";
+		status = "okay";
+
+		id_eeprom@56 {
+		    compatible = "atmel,24c04";
+		    reg = <0x56>;
+		    pagesize = <16>;
+		    status = "okay";
+		};
+
+		board_temp@48 {
+		    compatible = "ti,tmp102";
+		    reg = <0x48>;
+		    status = "okay";
+		    /* tempsensor_alert line running to pin PC19 on processor
+		       set up an interrupt for this? */
+		};
 	};
 
 	i2c-gpio-1 {
@@ -1356,7 +1344,21 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio1>;
-		status = "disabled";
+		status = "okay";
+
+		ap1_eeprom@50 {
+		    compatible = "atmel,24c04";
+		    reg = <0x50>;
+		    pagesize = <16>;
+		    status = "okay";
+		};
+
+		ap2_eeprom@52 {
+		    compatible = "atmel,24c04";
+		    reg = <0x52>;
+		    pagesize = <16>;
+		    status = "okay";
+		};
 	};
 
 	i2c-gpio-2 {
@@ -1374,19 +1376,51 @@
 		status = "disabled";
 	};
 
+	mts-io-0 {
+		status = "okay";
+		compatible = "mts,mts-io";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mts_io_out>;
+		pinctrl-1 = <&pinctrl_mts_io_in>;
+		pinctrl-2 = <&pinctrl_mts_io_gnss>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		pb18 {
-			label = "pb18";
-			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
+		pa24 {
+		    label = "led-status";
+		    gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+		    linux,default-trigger = "default-on";
+		};
+
+		pa25 {
+		    label = "led-a";
+		    gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
 		};
 
-		pd21 {
-			label = "pd21";
-			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+		pa26 {
+		    label = "led-b";
+		    gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 		};
+
+		pa27 {
+		    label = "led-c";
+		    gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
+		};
+
+		pa28 {
+		    label = "led-d";
+		    gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* GPS-PPS input on AP1 */
+	pps-0 {
+		compatible = "pps-gpio";
+		gpios = <&pioA 29 0>;
+		capture-clear;
+		status = "okay";
 	};
 
 	1wire_cm {