MTRE: Move mtre-leds to meta-mts-device sublayer

5 files changed, 0 insertions, 241 deletions

diff --git a/recipes-bsp/multitech/mtre-leds.bb b/recipes-bsp/multitech/mtre-leds.bb
deleted file mode 100644
index 59660b4..0000000
--- a/recipes-bsp/multitech/mtre-leds.bb
+++ /dev/null
@@ -1,30 +0,0 @@
-DESCRIPTION = "MTRE led setup facilities"
-HOMEPAGE = "http://www.multitech.com/"
-LICENSE = "Proprietary"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28"
-RDEPENDS_${PN} += "bash"
-
-PR = "r2"
-
-SRC_URI = " file://mtre-leds.init \
-            file://mtre-leds.sh \
-            file://mtre-leds-monitor.sh \
-            file://mtre-leds-device-ready.init \
-"
-inherit update-rc.d
-
-INITSCRIPT_NAME = "mtre-leds"
-INITSCRIPT_PARAMS = "start 45 S . stop 30 6 ."
-
-do_install() {
-  install -d ${D}/etc/init.d
-  install -m 0755 ${WORKDIR}/mtre-leds.init ${D}/etc/init.d/mtre-leds
-  install -d ${D}/sbin
-  install -m 0744 ${WORKDIR}/mtre-leds.sh ${D}/sbin/mtre-leds
-  install -m 0744 ${WORKDIR}/mtre-leds-monitor.sh ${D}/sbin/mtre-leds-monitor
-
-  # Install mtre device ready hook which turns on ENABLED LED after Web Access is allowed
-  install -d ${D}${sysconfdir}/rc5.d
-  install -m 0755 ${WORKDIR}/mtre-leds-device-ready.init ${D}/etc/init.d/mtre-leds-device-ready
-  ln -s /etc/init.d/mtre-leds-device-ready ${D}${sysconfdir}/rc5.d/S76mtre-leds-device-ready
-}
diff --git a/recipes-bsp/multitech/mtre-leds/mtre-leds-device-ready.init b/recipes-bsp/multitech/mtre-leds/mtre-leds-device-ready.init
deleted file mode 100755
index 250f592..0000000
--- a/recipes-bsp/multitech/mtre-leds/mtre-leds-device-ready.init
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-
-#
-# Notify LEDs engine that the device is now accessible.
-#
-
-mtre-leds device_ready
diff --git a/recipes-bsp/multitech/mtre-leds/mtre-leds-monitor.sh b/recipes-bsp/multitech/mtre-leds/mtre-leds-monitor.sh
deleted file mode 100755
index 087d8f3..0000000
--- a/recipes-bsp/multitech/mtre-leds/mtre-leds-monitor.sh
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/bash
-
-gpio=/sys/devices/platform/mts-io/reset
-#gpio=/tmp/pb
-
-status="0"
-
-while :
-do
-  usleep 150000
-  if [[ -r "$gpio" ]]; then
-    read -n 1 val < $gpio
-    if [[ ! -z "$val" && "$val" != "$status" ]]; then
-        if [[ "$val" == "1" ]]; then
-          mtre-leds start-test
-          status=$val
-        elif [[ "$val" == "0" ]]; then
-          mtre-leds stop-test
-          status=$val
-        fi
-    fi
-  fi
-done
diff --git a/recipes-bsp/multitech/mtre-leds/mtre-leds.init b/recipes-bsp/multitech/mtre-leds/mtre-leds.init
deleted file mode 100644
index 686fba8..0000000
--- a/recipes-bsp/multitech/mtre-leds/mtre-leds.init
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/bash
-
-case $1 in
-  start)
-    echo "Setting up leds"
-    # setup leds and triggers
-    mtre-leds start
-    # set to no-alarm initially
-    mtre-leds alarm-off
-    ;;
-
-  stop)
-    # turn leds off, disable triggers
-    mtre-leds stop
-    ;;
-
-  *)
-    echo "Usage: $0 {start|stop}"
-    exit 2
-    ;;
-esac
\ No newline at end of file
diff --git a/recipes-bsp/multitech/mtre-leds/mtre-leds.sh b/recipes-bsp/multitech/mtre-leds/mtre-leds.sh
deleted file mode 100755
index 773e331..0000000
--- a/recipes-bsp/multitech/mtre-leds/mtre-leds.sh
+++ /dev/null
@@ -1,160 +0,0 @@
-#!/bin/bash
-
-#
-# LED to trigger map
-#
-declare -A triggers
-
-##################################################################
-#                  #                 #                           #
-#     LED name     #    Trigger      #         Description       #
-# /sys/class/leds  #                 #                           #
-##################################################################
-triggers[pca955x:0]="led-no-alarm"   # ENABLE
-triggers[pca955x:1]="led-alarm"      # ALARM
-triggers[pca955x:2]="none"           # 10/100MBPS (HW controlled)
-triggers[pca955x:3]="none"           # LNK/ACT (HW controlled)
-triggers[pca955x:4]="vizzini1-tx"    # TX (serial)
-triggers[pca955x:5]="vizzini1-rx"    # RX (serial)
-triggers[pca955x:6]="led-sig4"       # LINK Quality Green
-triggers[pca955x:7]="led-sig3"       # LINK Quality Green
-triggers[pca955x:8]="led-sig2"       # LINK Quality Yellow
-triggers[pca955x:9]="led-sig1"       # LINK Quality Red
-triggers[pca955x:10]="led-cd"        # Celullar connectivity
-triggers[pca955x:11]="netdev"        # Cellular activity
-
-debug() {
-  [[ "$DEBUG" ]] && builtin echo $@
-}
-
-leds_enable() {
-    cd /sys/class/leds
-    for led in "${!triggers[@]}"
-    do
-        echo ${triggers[$led]} > $led/trigger
-        debug "LEDS: $led trigger enabled"
-    done
-}
-
-leds_disable() {
-    cd /sys/class/leds
-    for led in "${!triggers[@]}"
-    do
-        echo "none" > $led/trigger
-    done
-}
-
-led_set_alarm() {
-    local cmd="$1"
-
-    [ x"$cmd" == x"on" ]  && mts-io-sysfs store alarm 1
-    [ x"$cmd" == x"off" ] && mts-io-sysfs store alarm 0
-    [ x"$cmd" == x"minor" ] && mts-io-sysfs store alarm 2
-    [ x"$cmd" == x"update" ] && mts-io-sysfs store alarm 100
-    debug "LEDS: alarm set to $1"
-}
-
-led_set_device_ready() {
-    local cmd="$1"
-
-    [ x"$cmd" == x"on" ]  && mts-io-sysfs store device-ready 1
-    [ x"$cmd" == x"off" ] && mts-io-sysfs store device-ready 0
-    debug "LEDS: device_ready set to $1"
-}
-
-led_set_ppp_act() {
-    cd /sys/class/leds
-    for led in "${!triggers[@]}"
-    do
-        if [[ x"${triggers[$led]}" == x"netdev" ]]; then
-            echo "ppp0" > $led/device_name
-            echo "1" > $led/rx
-            echo "1" > $led/tx
-            debug "LEDS: ppp activity trigger is set"
-        fi
-    done
-}
-
-leds_set_brightness() {
-    cd /sys/class/leds
-    for led in "${!triggers[@]}"
-    do
-        local cmd="$1"
-
-        if [[ x"$cmd" == x"on" ]]; then
-            brightness="255"
-        elif [[ x"$cmd" == x"off" ]]; then
-            brightness="0"
-        fi
-
-        if [[ x"${triggers[$led]}" == x"led-alarm" ]]; then
-            #
-            # led alarm is inverted
-            #
-            if [[ x"$cmd" == x"on" ]]; then
-                brightness="0"
-            elif [[ x"$cmd" == x"off" ]]; then
-                brightness="255"
-            fi
-        fi
-
-        echo $brightness > $led/brightness
-
-        debug "LEDS: $led brightness set to $cmd"
-    done
-}
-
-case $1 in
-  start)
-    leds_disable            # disable all triggers
-    leds_set_brightness off # set all leds to off
-    leds_enable             # enable all triggers
-    led_set_alarm update    # update alarm leds with current alarm status
-    led_set_ppp_act         # setup ppp activity led
-    mtre-leds-monitor &     # start push-button monitor
-    ;;
-
-  stop)
-    killall -q mtre-leds-monitor
-    leds_disable            # disable all led triggers
-    leds_set_brightness off # set all leds to off
-    ;;
-
-  alarm-on)
-    led_set_alarm on        # store alarm
-    ;;
-
-  alarm-off)
-    led_set_alarm off       # set no alarm
-    ;;
-
-  alarm-minor)
-    led_set_alarm minor     # blink oneshot on minor alarm
-    ;;
-
-  device_ready)
-    led_set_device_ready on # indicate device readyness
-    ;;
-
-  device_not_ready)
-    led_set_device_ready off # indicate device readyness
-    ;;
-
-  start-test)
-    leds_disable            # disable all triggers
-    leds_set_brightness on  # set all leds to on
-    ;;
-
-  stop-test)
-    leds_disable            # disable all led triggers
-    leds_set_brightness off # set all leds to off
-    leds_enable             # enable all triggers
-    led_set_alarm update    # update alarm leds with current alarm status
-    led_set_ppp_act         # restore ppp activity settings
-    ;;
-
-  *)
-    echo "Usage: $0 <start|stop|alarm-on|alarm-off|alarm-minor|device_ready|device_not_ready|start-test|stop-test>"
-    exit 2
-    ;;
-esac