Add mtr stuff to mLinux

3 files changed, 536 insertions, 0 deletions

diff --git a/recipes-bsp/u-boot/u-boot-2016.09.01/mtr.patch b/recipes-bsp/u-boot/u-boot-2016.09.01/mtr.patch
new file mode 100644
index 0000000..3ef68f2
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-2016.09.01/mtr.patch
@@ -0,0 +1,270 @@
+diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+index b0d440d..13cc9a3 100644
+--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
++++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+@@ -44,7 +44,8 @@ static void at91sam9x5ek_nand_hw_init(void)
+ 	csa = readl(&matrix->ebicsa);
+ 	csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+ 	/* NAND flash on D16 */
+-	csa |= AT91_MATRIX_NFD0_ON_D16;
++	/* MTR: nand flash is set up by bootstrap, so leave it alone here */
++	/* csa |= AT91_MATRIX_NFD0_ON_D16; */
+ 
+ 	/* Configure IO drive */
+ 	csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
+@@ -256,6 +257,9 @@ int board_early_init_f(void)
+ 
+ int board_init(void)
+ {
++	/* Set Status LED High */
++	at91_set_gpio_output(BOOT_STATUS_LED, 0);
++
+ 	/* arch number of AT91SAM9X5EK-Board */
+ 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
+ 
+@@ -363,3 +367,60 @@ void mem_init(void)
+ 	ddr2_init(ATMEL_BASE_DDRSDRC, ATMEL_BASE_CS1, &ddr2);
+ }
+ #endif
++
++/* on-board EEPROM */
++struct mts_id_eeprom_layout {
++    char vendor_id[32];
++    char product_id[32];
++    char device_id[32];
++    char hw_version[32];
++    uint8_t mac_addr[6];
++    char imei[32];
++    uint8_t capa[32];
++    uint8_t mac_bluetooth[6];
++    uint8_t mac_wifi[6];
++    uint8_t reserved[302];
++};
++
++int board_get_enetaddr(uchar *enetaddr)
++{
++	struct mts_id_eeprom_layout eeprom_buffer = {0};
++
++	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, &eeprom_buffer, sizeof(eeprom_buffer))) {
++		printf("EEPROM: read error\n");
++		return 0;
++	}
++
++	if (eeprom_buffer.vendor_id[0] == 0x00 || eeprom_buffer.vendor_id[0] == 0xFF) {
++		printf("EEPROM: uninitialized\n");
++		return 0;
++	}
++
++	printf("vendor-id:  %s\n",  eeprom_buffer.vendor_id);
++	printf("product-id: %s\n", eeprom_buffer.product_id);
++	printf("device-id:  %s\n",  eeprom_buffer.device_id);
++	printf("hw-version: %s\n", eeprom_buffer.hw_version);
++	printf("mac-addr:   %02x:%02x:%02x:%02x:%02x:%02x\n", eeprom_buffer.mac_addr[0],
++		eeprom_buffer.mac_addr[1],
++		eeprom_buffer.mac_addr[2],
++		eeprom_buffer.mac_addr[3],
++		eeprom_buffer.mac_addr[4],
++		eeprom_buffer.mac_addr[5]);
++
++	memcpy(enetaddr, eeprom_buffer.mac_addr, 6);
++
++	return 1;
++}
++
++int misc_init_r(void)
++{
++	uchar enetaddr[6];
++
++	/* set MAC address from EEPROM if read successful */
++	if (board_get_enetaddr(enetaddr)) {
++		eth_setenv_enetaddr("ethaddr", enetaddr);
++	}
++
++	return 0;
++}
++
+diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
+index c276795..9ba415d 100644
+--- a/configs/at91sam9x5ek_nandflash_defconfig
++++ b/configs/at91sam9x5ek_nandflash_defconfig
+@@ -31,4 +31,3 @@ CONFIG_CMD_USB=y
+ CONFIG_CMD_NAND=y
+ CONFIG_CMD_BOOTZ=y
+ CONFIG_CMD_MII=y
+-CONFIG_CMD_I2C=y
+diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
+index 637c403..693feee 100644
+--- a/include/configs/at91sam9x5ek.h
++++ b/include/configs/at91sam9x5ek.h
+@@ -9,8 +9,10 @@
+ #ifndef __CONFIG_H__
+ #define __CONFIG_H__
+ 
++#include <linux/kconfig.h>
+ #include <asm/hardware.h>
+ 
++#define USE_MTR
+ #define CONFIG_SYS_TEXT_BASE		0x26f00000
+ 
+ /* ARM asynchronous clock */
+@@ -26,6 +28,8 @@
+ #define CONFIG_BOARD_EARLY_INIT_F
+ #define CONFIG_DISPLAY_CPUINFO
+ 
++#define CONFIG_MISC_INIT_R       /* enable platform-dependent misc_init_r() */
++
+ /* general purpose I/O */
+ #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
+ #define CONFIG_AT91_GPIO
+@@ -36,6 +40,8 @@
+ #define CONFIG_USART_ID		ATMEL_ID_SYS
+ 
+ /* LCD */
++/* MTR has no LCD */
++#if !defined(MTR)
+ #define CONFIG_LCD
+ #define LCD_BPP			LCD_COLOR16
+ #define LCD_OUTPUT_BPP		24
+@@ -46,7 +52,13 @@
+ #define CONFIG_ATMEL_HLCD
+ #define CONFIG_ATMEL_LCD_RGB565
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV
++#endif  /* !defined(MTR) */
++
++/* check for keypress even if bootdelay is 0 */
++#define CONFIG_ZERO_BOOTDELAY_CHECK
+ 
++/*STATUS LED*/
++#define BOOT_STATUS_LED AT91_PIN_PC21
+ 
+ /*
+  * BOOTP options
+@@ -59,10 +71,7 @@
+ /* no NOR flash */
+ #define CONFIG_SYS_NO_FLASH
+ 
+-/*
+- * Command line configuration.
+- */
+-#define CONFIG_CMD_NAND
++#define CONFIG_SYS_I2C
+ 
+ /*
+  * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
+@@ -94,13 +103,30 @@
+ /* our CLE is AD22 */
+ #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
+ #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
+-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
++/* MTR nand ready is PC31 */
++#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC31
+ 
+ /* PMECC & PMERRLOC */
+ #define CONFIG_ATMEL_NAND_HWECC		1
+ #define CONFIG_ATMEL_NAND_HW_PMECC	1
+-#define CONFIG_PMECC_CAP		2
++
++/* MTR: 4-bit PMECC */
++#define CONFIG_PMECC_CAP		4
+ #define CONFIG_PMECC_SECTOR_SIZE	512
++/* 
++ * CONFIG_PMECC_INDEX_TABLE_OFFSET has been replaced by:
++ *  ATMEL_PMECC_INDEX_OFFSET_512 and
++ *  ATMEL_PMECC_INDEX_OFFSET_1024
++ *
++ * Which as used depends on:
++ * host->pmecc_sector_size == 512
++ *
++ * 2012.10:
++ * #define CONFIG_PMECC_INDEX_TABLE_OFFSET	0x8000
++ * 2016.03 (at91sam9x5.h):
++ * 182:#define ATMEL_PMECC_INDEX_OFFSET_512	0x8000
++ */
++
+ 
+ #define CONFIG_CMD_NAND_TRIMFFS
+ 
+@@ -127,9 +153,11 @@
+ 
+ /* Ethernet */
+ #define CONFIG_MACB
+-#define CONFIG_RMII
++#undef CONFIG_RMII
+ #define CONFIG_NET_RETRY_COUNT		20
+ #define CONFIG_MACB_SEARCH_PHY
++/* enable MII command */
++#define CONFIG_CMD_MII 1
+ 
+ /* USB */
+ #ifdef CONFIG_CMD_USB
+@@ -147,6 +175,22 @@
+ #endif
+ #endif
+ 
++#define CONFIG_SYS_I2C_SOFT
++#define CONFIG_SOFT_I2C
++#define CONFIG_SOFT_I2C_GPIO_SCL AT91_PIN_PA31
++#define CONFIG_SOFT_I2C_GPIO_SDA AT91_PIN_PA30
++#define CONFIG_SYS_I2C_SOFT_SPEED		50000
++#define CONFIG_SYS_I2C_SPEED		CONFIG_SYS_I2C_SOFT_SPEED
++/* Values from previous levels of Conduit U-Boot */
++#define CONFIG_SYS_I2C_SLAVE    0xfe
++#define I2C_RXTX_LEN	128
++
++/* I2C eeprom support */
++#define CONFIG_CMD_EEPROM
++#define CONFIG_SYS_I2C_EEPROM_ADDR 0x56			/* at24c04 */
++#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1		/* Bytes of address<---><------>*/
++#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
++
+ #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
+ 
+ #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+@@ -156,11 +200,11 @@
+ /* bootstrap + u-boot + env + linux in nandflash */
+ #define CONFIG_ENV_IS_IN_NAND
+ #define CONFIG_ENV_OFFSET		0xc0000
+-#define CONFIG_ENV_OFFSET_REDUND	0x100000
++#define CONFIG_ENV_OFFSET_REDUND	0x160000
+ #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+-#define CONFIG_BOOTCOMMAND	"nand read " \
+-				"0x22000000 0x200000 0x300000; " \
+-				"bootm 0x22000000"
++/* MTR: read from env variables for boot */
++#define CONFIG_BOOTCOMMAND "nboot.jffs2 ${loadaddr} 0 ${kernel_addr}; bootm ${loadaddr}"
++
+ #elif defined(CONFIG_SYS_USE_SPIFLASH)
+ /* bootstrap + u-boot + env + linux in spi flash */
+ #define CONFIG_ENV_IS_IN_SPI_FLASH
+@@ -197,6 +241,9 @@
+ 				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
+ 				"root=/dev/mmcblk0p2 " \
+ 				"rw rootfstype=ext4 rootwait"
++#elif defined(USE_MTR)
++/* MTR uses jffs2 */
++#define CONFIG_BOOTARGS        "mem=128M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2"
+ #else
+ #define CONFIG_BOOTARGS							\
+ 	"console=ttyS0,115200 earlyprintk "				\
+@@ -274,4 +321,21 @@
+ 
+ #endif
+ 
++/* MTR defaults */
++#define CONFIG_ENV_OVERWRITE   1 /* Allow Overwrite of serial# & ethaddr */
++#define CONFIG_ETHADDR     00:08:00:87:00:02
++#define CONFIG_IPADDR      192.168.2.1
++#define CONFIG_NETMASK     255.255.255.0
++#define CONFIG_SERVERIP    192.168.2.2
++#define CONFIG_HOSTNAME    AT91SAM9G25
++#define CONFIG_LOADADDR    0x22000000
++
++/* MTR - enable watchdog */
++#define CONFIG_AT91SAM9_WATCHDOG 1
++#define CONFIG_HW_WATCHDOG 1
++#define CONFIG_AT91_HW_WDT_TIMEOUT 16
++#define CONFIG_EXTRA_ENV_SETTINGS          \
++   "kernel_addr=0x200000\0"          \
++   ""
++
+ #endif
diff --git a/recipes-bsp/u-boot/u-boot-2016.09.01/mtrv1.patch b/recipes-bsp/u-boot/u-boot-2016.09.01/mtrv1.patch
new file mode 100644
index 0000000..53b4995
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-2016.09.01/mtrv1.patch
@@ -0,0 +1,259 @@
+diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+index b0d440d..5640cef 100644
+--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
++++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+@@ -44,7 +44,8 @@ static void at91sam9x5ek_nand_hw_init(void)
+ 	csa = readl(&matrix->ebicsa);
+ 	csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+ 	/* NAND flash on D16 */
+-	csa |= AT91_MATRIX_NFD0_ON_D16;
++	/* MTR: nand flash is set up by bootstrap, so leave it alone here */
++	/* csa |= AT91_MATRIX_NFD0_ON_D16; */
+ 
+ 	/* Configure IO drive */
+ 	csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
+@@ -256,6 +257,9 @@ int board_early_init_f(void)
+ 
+ int board_init(void)
+ {
++	/* Set Status LED High */
++	at91_set_gpio_output(BOOT_STATUS_LED, 0);
++
+ 	/* arch number of AT91SAM9X5EK-Board */
+ 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
+ 
+@@ -362,4 +366,61 @@ void mem_init(void)
+ 	/* DDRAM2 Controller initialize */
+ 	ddr2_init(ATMEL_BASE_DDRSDRC, ATMEL_BASE_CS1, &ddr2);
+ }
++
+ #endif
++
++/* on-board EEPROM */
++struct mts_id_eeprom_layout {
++    char vendor_id[32];
++    char product_id[32];
++    char device_id[32];
++    char hw_version[32];
++    uint8_t mac_addr[6];
++    char imei[32];
++    uint8_t capa[32];
++    uint8_t mac_bluetooth[6];
++    uint8_t mac_wifi[6];
++    uint8_t reserved[302];
++};
++
++int board_get_enetaddr(uchar *enetaddr)
++{
++	struct mts_id_eeprom_layout eeprom_buffer = {0};
++
++	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, &eeprom_buffer, sizeof(eeprom_buffer))) {
++		printf("EEPROM: read error\n");
++		return 0;
++	}
++
++	if (eeprom_buffer.vendor_id[0] == 0x00 || eeprom_buffer.vendor_id[0] == 0xFF) {
++		printf("EEPROM: uninitialized\n");
++		return 0;
++	}
++
++	printf("vendor-id:  %s\n",  eeprom_buffer.vendor_id);
++	printf("product-id: %s\n", eeprom_buffer.product_id);
++	printf("device-id:  %s\n",  eeprom_buffer.device_id);
++	printf("hw-version: %s\n", eeprom_buffer.hw_version);
++	printf("mac-addr:   %02x:%02x:%02x:%02x:%02x:%02x\n", eeprom_buffer.mac_addr[0],
++		eeprom_buffer.mac_addr[1],
++		eeprom_buffer.mac_addr[2],
++		eeprom_buffer.mac_addr[3],
++		eeprom_buffer.mac_addr[4],
++		eeprom_buffer.mac_addr[5]);
++
++	memcpy(enetaddr, eeprom_buffer.mac_addr, 6);
++
++	return 1;
++}
++
++int misc_init_r(void)
++{
++	uchar enetaddr[6];
++
++	/* set MAC address from EEPROM if read successful */
++	if (board_get_enetaddr(enetaddr)) {
++		eth_setenv_enetaddr("ethaddr", enetaddr);
++	}
++
++	return 0;
++}
+diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
+index c276795..9ba415d 100644
+--- a/configs/at91sam9x5ek_nandflash_defconfig
++++ b/configs/at91sam9x5ek_nandflash_defconfig
+@@ -31,4 +31,3 @@ CONFIG_CMD_USB=y
+ CONFIG_CMD_NAND=y
+ CONFIG_CMD_BOOTZ=y
+ CONFIG_CMD_MII=y
+-CONFIG_CMD_I2C=y
+diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
+index 637c403..eff48d6 100644
+--- a/include/configs/at91sam9x5ek.h
++++ b/include/configs/at91sam9x5ek.h
+@@ -9,8 +9,10 @@
+ #ifndef __CONFIG_H__
+ #define __CONFIG_H__
+ 
++#include <linux/kconfig.h>
+ #include <asm/hardware.h>
+ 
++#define USE_MTR
+ #define CONFIG_SYS_TEXT_BASE		0x26f00000
+ 
+ /* ARM asynchronous clock */
+@@ -26,6 +28,8 @@
+ #define CONFIG_BOARD_EARLY_INIT_F
+ #define CONFIG_DISPLAY_CPUINFO
+ 
++#define CONFIG_MISC_INIT_R       /* enable platform-dependent misc_init_r() */
++
+ /* general purpose I/O */
+ #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
+ #define CONFIG_AT91_GPIO
+@@ -36,6 +40,8 @@
+ #define CONFIG_USART_ID		ATMEL_ID_SYS
+ 
+ /* LCD */
++/* MTR has no LCD */
++#if !defined(MTR)
+ #define CONFIG_LCD
+ #define LCD_BPP			LCD_COLOR16
+ #define LCD_OUTPUT_BPP		24
+@@ -46,7 +52,13 @@
+ #define CONFIG_ATMEL_HLCD
+ #define CONFIG_ATMEL_LCD_RGB565
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV
++#endif  /* !defined(MTR) */
++
++/* check for keypress even if bootdelay is 0 */
++#define CONFIG_ZERO_BOOTDELAY_CHECK
+ 
++/*STATUS LED*/
++#define BOOT_STATUS_LED AT91_PIN_PC21
+ 
+ /*
+  * BOOTP options
+@@ -59,10 +71,7 @@
+ /* no NOR flash */
+ #define CONFIG_SYS_NO_FLASH
+ 
+-/*
+- * Command line configuration.
+- */
+-#define CONFIG_CMD_NAND
++#define CONFIG_SYS_I2C
+ 
+ /*
+  * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
+@@ -94,13 +103,30 @@
+ /* our CLE is AD22 */
+ #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
+ #define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
+-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
++/* MTR nand ready is PC31 */
++#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC31
+ 
+ /* PMECC & PMERRLOC */
+ #define CONFIG_ATMEL_NAND_HWECC		1
+ #define CONFIG_ATMEL_NAND_HW_PMECC	1
+-#define CONFIG_PMECC_CAP		2
++
++/* MTR: 4-bit PMECC */
++#define CONFIG_PMECC_CAP		4
+ #define CONFIG_PMECC_SECTOR_SIZE	512
++/* 
++ * CONFIG_PMECC_INDEX_TABLE_OFFSET has been replaced by:
++ *  ATMEL_PMECC_INDEX_OFFSET_512 and
++ *  ATMEL_PMECC_INDEX_OFFSET_1024
++ *
++ * Which as used depends on:
++ * host->pmecc_sector_size == 512
++ *
++ * 2012.10:
++ * #define CONFIG_PMECC_INDEX_TABLE_OFFSET	0x8000
++ * 2016.03 (at91sam9x5.h):
++ * 182:#define ATMEL_PMECC_INDEX_OFFSET_512	0x8000
++ */
++
+ 
+ #define CONFIG_CMD_NAND_TRIMFFS
+ 
+@@ -147,6 +173,23 @@
+ #endif
+ #endif
+ 
++#define CONFIG_SYS_I2C_SOFT
++#define CONFIG_SOFT_I2C
++#define CONFIG_SOFT_I2C_GPIO_SCL AT91_PIN_PA31
++#define CONFIG_SOFT_I2C_GPIO_SDA AT91_PIN_PA30
++#define CONFIG_SYS_I2C_SOFT_SPEED		50000
++#define CONFIG_SYS_I2C_SPEED		CONFIG_SYS_I2C_SOFT_SPEED
++/* Values from previous levels of Conduit U-Boot */
++#define CONFIG_SYS_I2C_SLAVE    0xfe
++#define I2C_RXTX_LEN	128
++
++/* I2C eeprom support */
++#define CONFIG_CMD_EEPROM
++#define CONFIG_SYS_I2C_EEPROM_ADDR 0x56			/* at24c04 */
++#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1		/* Bytes of address<---><------>*/
++#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
++
++
+ #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
+ 
+ #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+@@ -156,11 +199,11 @@
+ /* bootstrap + u-boot + env + linux in nandflash */
+ #define CONFIG_ENV_IS_IN_NAND
+ #define CONFIG_ENV_OFFSET		0xc0000
+-#define CONFIG_ENV_OFFSET_REDUND	0x100000
++#define CONFIG_ENV_OFFSET_REDUND	0x160000
+ #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+-#define CONFIG_BOOTCOMMAND	"nand read " \
+-				"0x22000000 0x200000 0x300000; " \
+-				"bootm 0x22000000"
++/* MTR: read from env variables for boot */
++#define CONFIG_BOOTCOMMAND "nboot.jffs2 ${loadaddr} 0 ${kernel_addr}; bootm ${loadaddr}"
++
+ #elif defined(CONFIG_SYS_USE_SPIFLASH)
+ /* bootstrap + u-boot + env + linux in spi flash */
+ #define CONFIG_ENV_IS_IN_SPI_FLASH
+@@ -197,6 +240,9 @@
+ 				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
+ 				"root=/dev/mmcblk0p2 " \
+ 				"rw rootfstype=ext4 rootwait"
++#elif defined(USE_MTR)
++/* MTR uses jffs2 */
++#define CONFIG_BOOTARGS        "mem=128M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2"
+ #else
+ #define CONFIG_BOOTARGS							\
+ 	"console=ttyS0,115200 earlyprintk "				\
+@@ -274,4 +320,21 @@
+ 
+ #endif
+ 
++/* MTR defaults */
++#define CONFIG_ENV_OVERWRITE   1 /* Allow Overwrite of serial# & ethaddr */
++#define CONFIG_ETHADDR     00:08:00:87:00:02
++#define CONFIG_IPADDR      192.168.2.1
++#define CONFIG_NETMASK     255.255.255.0
++#define CONFIG_SERVERIP    192.168.2.2
++#define CONFIG_HOSTNAME    AT91SAM9G25
++#define CONFIG_LOADADDR    0x22000000
++
++/* MTR - enable watchdog */
++#define CONFIG_AT91SAM9_WATCHDOG 1
++#define CONFIG_HW_WATCHDOG 1
++#define CONFIG_AT91_HW_WDT_TIMEOUT 16
++#define CONFIG_EXTRA_ENV_SETTINGS          \
++   "kernel_addr=0x200000\0"          \
++   ""
++
+ #endif
diff --git a/recipes-bsp/u-boot/u-boot_2016.09.01.bb b/recipes-bsp/u-boot/u-boot_2016.09.01.bb
index a7281a4..d68960c 100644
--- a/recipes-bsp/u-boot/u-boot_2016.09.01.bb
+++ b/recipes-bsp/u-boot/u-boot_2016.09.01.bb
@@ -17,6 +17,13 @@ SRC_URI_append_mtcdt = " \
 SRC_URI_append_mtcap = " \
            file://mtcdt.patch"
 
+SRC_URI_append_mtr = "\
+           file://mtr.patch \
+"
+SRC_URI_append_mtrv1 = "\
+           file://mtrv1.patch \
+"
+
 SRC_URI[md5sum] = "61c628f8034477c946e173ed174efeb4"
 SRC_URI[sha256sum] = "95728e89dd476d17428f94080752ab48884be477b6a678941582aeef618b70bb"