meta-mlinux.git - mLinux Distribution Layer

Age	Commit message (Expand)	Author	Files
2018-03-20	pgrep does not work during boot causing gpsd_ubx_* commands to hang.	John Klug	2
2018-03-14	Fix stalled ntpd startup on certain systems	John Klug	2
2017-10-24	Hang in gpsd_ubx_fixed during boot, non-existent gpsd.hotplug.wrapper message...	John Klug	2
2017-06-19	Allow a maximum of 20 seconds to set the baud rate. Normally this takes ten ...	John Klug	1
2017-06-19	Exit if there is no GPS capability	John Klug	1
2017-06-19	setserial not in factory image, and low latency is the default	John Klug	1
2017-01-23	Remove gpsd code that contradicts ITU leap second standard	John Klug	1
2017-01-20	Use flag ENABLED in /etc/default like other MTS services	John Klug	2
2017-01-19	Leap second fix for U-Blox message UBX_NAV_TIMELS	John Klug	1
2017-01-19	Remove excess usage from case statement	John Klug	1
2017-01-16	Remove unneeded GPS_NUM	John Klug	2
2017-01-16	Remove incorrect comment	John Klug	1
2017-01-16	Must exit if GPS not found on old conduit	John Klug	1
2017-01-16	Have udev create /dev/gps0	John Klug	1
2017-01-12	Fix bad option for logger	John Klug	1
2017-01-12	Add script to set the system clock directly from the GPS.	John Klug	1
2017-01-12	Do not change the baud rate if gpsd is already running	John Klug	1
2017-01-11	Add new parameters for evaluating GPS fix status.	John Klug	2
2017-01-10	Add status to gpsd init script	John Klug	1
2017-01-09	Add gps0 symlink and set baud rate	John Klug	2
2017-01-06	Add flag to start gpsd	John Klug	2
2016-12-21	Change priority of gpsd and add multitech GPS device to default.	John Klug	2
2016-12-20	Add gpsd -n option to get it to start immediately	John Klug	1
2016-12-15	Add nice value to GPSD	John Klug	1
2016-12-14	Add Conduit GPS devices to GPSD configuration	John Klug	1
2016-12-13	Add gpsd 3.14	John Klug	4
2016-12-13	GPSD 3.14 Bitbake recipe	John Klug	5
2016-11-15	Add mts-io features to GPSD init.d script	John Klug	1