diff options
Diffstat (limited to 'recipes-core/multitech/config/ppp')
14 files changed, 31 insertions, 30 deletions
diff --git a/recipes-core/multitech/config/ppp/peers/README.fwswitch b/recipes-core/multitech/config/ppp/peers/README.fwswitch index 3e6e5fb..47ef5ef 100644 --- a/recipes-core/multitech/config/ppp/peers/README.fwswitch +++ b/recipes-core/multitech/config/ppp/peers/README.fwswitch @@ -1,4 +1,4 @@ -LNA3 firmware/SIM switching instructions +LNA3/L4N1 firmware/SIM switching instructions To automatically set the APN, bring up the system with the desired SIM installed (AT&T or Verizon). @@ -50,11 +50,12 @@ Put the desired SIM into the device. The default APN is "phone" for the LNA3. -Set the APN using: +Set the APN using (does nothing for Sprint or Verizon chat scripts): -kkk # mlinux-set-apn "YOURAPN" +# mlinux-set-apn "YOURAPN" -Do not put a "AT+CGDCONT" in the lna3_chat_vz script. It will cause trouble. +Do not put a "AT+CGDCONT" in the lna3_chat_vz script or +l4n1_chat_vz script. It will cause trouble. To pick a firmware based on the diff --git a/recipes-core/multitech/config/ppp/peers/gsm b/recipes-core/multitech/config/ppp/peers/gsm index c456764..4fc4361 100644 --- a/recipes-core/multitech/config/ppp/peers/gsm +++ b/recipes-core/multitech/config/ppp/peers/gsm @@ -8,4 +8,4 @@ ipcp-restart 10 noauth crtscts novj -connect '/usr/libexec/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/gsm_chat' +connect '/usr/libexec/ppp/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/gsm_chat' diff --git a/recipes-core/multitech/config/ppp/peers/gsm_chat b/recipes-core/multitech/config/ppp/peers/gsm_chat index a92c938..d952a89 100644 --- a/recipes-core/multitech/config/ppp/peers/gsm_chat +++ b/recipes-core/multitech/config/ppp/peers/gsm_chat @@ -15,18 +15,18 @@ OK 'AT+CSQ' # Note that a comment starting with # #MT AT+CGDCONT= # will be interpretted by -# /usr/libexec/chat_wrapper +# /usr/libexec/ppp/chat_wrapper # as the intended context # setting. Make the context number # (after the =) match the # dialer number context. -# If the context changes, chat_wrapper +# If the context changes, ppp/chat_wrapper # handles disconnecting the modem # from the network during the update, # which is required # by some modem firmware. # The chat script will be executed -# after the chat_wrapper script +# after the ppp/chat_wrapper script # re-registers the modem. # The context will only be set if the # modem settings do not match the diff --git a/recipes-core/multitech/config/ppp/peers/l4e1 b/recipes-core/multitech/config/ppp/peers/l4e1 index 2996e6e..9638398 100644 --- a/recipes-core/multitech/config/ppp/peers/l4e1 +++ b/recipes-core/multitech/config/ppp/peers/l4e1 @@ -8,4 +8,4 @@ ipcp-restart 10 noauth crtscts novj -connect '/usr/libexec/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/l4e1_chat' +connect '/usr/libexec/ppp/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/l4e1_chat' diff --git a/recipes-core/multitech/config/ppp/peers/l4e1_chat b/recipes-core/multitech/config/ppp/peers/l4e1_chat index 6b6be44..bb95881 100644 --- a/recipes-core/multitech/config/ppp/peers/l4e1_chat +++ b/recipes-core/multitech/config/ppp/peers/l4e1_chat @@ -15,18 +15,18 @@ OK 'AT+CSQ' # Note that a comment starting with # #MT AT+CGDCONT= # will be interpretted by -# /usr/libexec/chat_wrapper +# /usr/libexec/ppp/chat_wrapper # as the intended context # setting. Make the context number # (after the =) match the # dialer number context. -# If the context changes, chat_wrapper +# If the context changes, ppp/chat_wrapper # handles disconnecting the modem # from the network during the update, # which is required # by some modem firmware. # The chat script will be executed -# after the chat_wrapper script +# after the ppp/chat_wrapper script # re-registers the modem. # The context will only be set if the # modem settings do not match the diff --git a/recipes-core/multitech/config/ppp/peers/l4n1 b/recipes-core/multitech/config/ppp/peers/l4n1 index 2e0b501..5c011e0 100644 --- a/recipes-core/multitech/config/ppp/peers/l4n1 +++ b/recipes-core/multitech/config/ppp/peers/l4n1 @@ -8,4 +8,4 @@ ipcp-restart 10 noauth crtscts novj -connect '/usr/libexec/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/l4n1_chat' +connect '/usr/libexec/ppp/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/l4n1_chat' diff --git a/recipes-core/multitech/config/ppp/peers/l4n1_chat_non_vz b/recipes-core/multitech/config/ppp/peers/l4n1_chat_non_vz index 2839f40..76f3aae 100644 --- a/recipes-core/multitech/config/ppp/peers/l4n1_chat_non_vz +++ b/recipes-core/multitech/config/ppp/peers/l4n1_chat_non_vz @@ -36,18 +36,18 @@ OK 'AT+CSQ' # Note that a comment starting with # #MT AT+CGDCONT= # will be interpretted by -# /usr/libexec/chat_wrapper +# /usr/libexec/ppp/chat_wrapper # as the intended context # setting. Make the context number # (after the =) match the # dialer number context. -# If the context changes, chat_wrapper +# If the context changes, ppp/chat_wrapper # handles disconnecting the modem # from the network during the update, # which is required # by some modem firmware. # The chat script will be executed -# after the chat_wrapper script +# after the ppp/chat_wrapper script # re-registers the modem. # The context will only be set if the # modem settings do not match the @@ -60,7 +60,7 @@ OK 'AT+CSQ' #MT AT+CGDCONT=1,"IP","phone" OK 'AT+CGDCONT?' SAY "Dialing...\n" -OK 'ATD*99***3#' +OK 'ATD*99***1#' SAY "Waiting for CONNECT...\n" TIMEOUT 120 CONNECT '' diff --git a/recipes-core/multitech/config/ppp/peers/lap3 b/recipes-core/multitech/config/ppp/peers/lap3 index 9b56aae..ddd75a5 100644 --- a/recipes-core/multitech/config/ppp/peers/lap3 +++ b/recipes-core/multitech/config/ppp/peers/lap3 @@ -8,4 +8,4 @@ ipcp-restart 10 noauth crtscts novj -connect '/usr/libexec/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/lap3_chat' +connect '/usr/libexec/ppp/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/lap3_chat' diff --git a/recipes-core/multitech/config/ppp/peers/lap3_chat b/recipes-core/multitech/config/ppp/peers/lap3_chat index 92a5e54..0f7adf6 100644 --- a/recipes-core/multitech/config/ppp/peers/lap3_chat +++ b/recipes-core/multitech/config/ppp/peers/lap3_chat @@ -15,18 +15,18 @@ OK 'AT+CSQ' # Note that a comment starting with # #MT AT+CGDCONT= # will be interpretted by -# /usr/libexec/chat_wrapper +# /usr/libexec/ppp/chat_wrapper # as the intended context # setting. Make the context number # (after the =) match the # dialer number context. -# If the context changes, chat_wrapper +# If the context changes, ppp/chat_wrapper # handles disconnecting the modem # from the network during the update, # which is required # by some modem firmware. # The chat script will be executed -# after the chat_wrapper script +# after the ppp/chat_wrapper script # re-registers the modem. # The context will only be set if the # modem settings do not match the diff --git a/recipes-core/multitech/config/ppp/peers/leu1 b/recipes-core/multitech/config/ppp/peers/leu1 index 2e247b3..5a3baec 100644 --- a/recipes-core/multitech/config/ppp/peers/leu1 +++ b/recipes-core/multitech/config/ppp/peers/leu1 @@ -8,4 +8,4 @@ ipcp-restart 10 noauth crtscts novj -connect '/usr/libexec/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/leu1_chat' +connect '/usr/libexec/ppp/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/leu1_chat' diff --git a/recipes-core/multitech/config/ppp/peers/leu1_chat b/recipes-core/multitech/config/ppp/peers/leu1_chat index 817f75d..6aef877 100644 --- a/recipes-core/multitech/config/ppp/peers/leu1_chat +++ b/recipes-core/multitech/config/ppp/peers/leu1_chat @@ -15,18 +15,18 @@ OK 'AT+CSQ' # Note that a comment starting with # #MT AT+CGDCONT= # will be interpretted by -# /usr/libexec/chat_wrapper +# /usr/libexec/ppp/chat_wrapper # as the intended context # setting. Make the context number # (after the =) match the # dialer number context. -# If the context changes, chat_wrapper +# If the context changes, ppp/chat_wrapper # handles disconnecting the modem # from the network during the update, # which is required # by some modem firmware. # The chat script will be executed -# after the chat_wrapper script +# after the ppp/chat_wrapper script # re-registers the modem. # The context will only be set if the # modem settings do not match the diff --git a/recipes-core/multitech/config/ppp/peers/lna3 b/recipes-core/multitech/config/ppp/peers/lna3 index 022e4fc..4f6a628 100644 --- a/recipes-core/multitech/config/ppp/peers/lna3 +++ b/recipes-core/multitech/config/ppp/peers/lna3 @@ -8,4 +8,4 @@ ipcp-restart 10 noauth crtscts novj -connect '/usr/libexec/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/lna3_chat' +connect '/usr/libexec/ppp/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/lna3_chat' diff --git a/recipes-core/multitech/config/ppp/peers/lna3_chat_non_vz b/recipes-core/multitech/config/ppp/peers/lna3_chat_non_vz index 33fd377..a3da519 100644 --- a/recipes-core/multitech/config/ppp/peers/lna3_chat_non_vz +++ b/recipes-core/multitech/config/ppp/peers/lna3_chat_non_vz @@ -36,18 +36,18 @@ OK 'AT+CSQ' # Note that a comment starting with # #MT AT+CGDCONT= # will be interpretted by -# /usr/libexec/chat_wrapper +# /usr/libexec/ppp/chat_wrapper # as the intended context # setting. Make the context number # (after the =) match the # dialer number context. -# If the context changes, chat_wrapper +# If the context changes, ppp/chat_wrapper # handles disconnecting the modem # from the network during the update, # which is required # by some modem firmware. # The chat script will be executed -# after the chat_wrapper script +# after the ppp/chat_wrapper script # re-registers the modem. # The context will only be set if the # modem settings do not match the diff --git a/recipes-core/multitech/config/ppp/peers/lsp3 b/recipes-core/multitech/config/ppp/peers/lsp3 index 4a3da2f..50433ab 100644 --- a/recipes-core/multitech/config/ppp/peers/lsp3 +++ b/recipes-core/multitech/config/ppp/peers/lsp3 @@ -8,4 +8,4 @@ ipcp-restart 10 noauth crtscts novj -connect '/usr/libexec/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/lsp3_chat' +connect '/usr/libexec/ppp/chat_wrapper /usr/sbin/chat -v -t 90 -f /etc/ppp/peers/lsp3_chat' |