diff options
Diffstat (limited to 'recipes-connectivity')
97 files changed, 773 insertions, 19169 deletions
diff --git a/recipes-connectivity/hostapd/hostap-daemon-1.0/default b/recipes-connectivity/hostapd/hostap-daemon-1.0/default deleted file mode 100644 index 0923a8c..0000000 --- a/recipes-connectivity/hostapd/hostap-daemon-1.0/default +++ /dev/null @@ -1,2 +0,0 @@ -# set to "yes" to start hostapd on boot -START_ON_BOOT="no" diff --git a/recipes-connectivity/hostapd/hostap-daemon-1.0/init b/recipes-connectivity/hostapd/hostap-daemon-1.0/init deleted file mode 100644 index a8d622f..0000000 --- a/recipes-connectivity/hostapd/hostap-daemon-1.0/init +++ /dev/null @@ -1,43 +0,0 @@ -#!/bin/sh -DAEMON=/usr/sbin/hostapd -NAME=hostapd -DESC="HOSTAP Daemon" -ARGS="/etc/hostapd.conf -B" - -test -f $DAEMON || exit 0 - -[ -f /etc/default/$NAME ] && . /etc/default/$NAME - -if [ "$START_ON_BOOT" != "yes" ]; then - exit 0 -fi - -set -e - -case "$1" in - start) - echo -n "Starting $DESC: " - start-stop-daemon -S -x $DAEMON -- $ARGS - echo "$NAME." - ;; - stop) - echo -n "Stopping $DESC: " - start-stop-daemon -K -x $DAEMON - echo "$NAME." - ;; - restart) - $0 stop - $0 start - ;; - reload) - echo -n "Reloading $DESC: " - killall -HUP $(basename ${DAEMON}) - echo "$NAME." - ;; - *) - echo "Usage: $0 {start|stop|restart|reload}" - exit 1 - ;; -esac - -exit 0 diff --git a/recipes-connectivity/hostapd/hostap-daemon-2.7/defconfig b/recipes-connectivity/hostapd/hostap-daemon-2.7/defconfig deleted file mode 100644 index 321b7c1..0000000 --- a/recipes-connectivity/hostapd/hostap-daemon-2.7/defconfig +++ /dev/null @@ -1,319 +0,0 @@ -# Example hostapd build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cass, these lines should use += in order not -# to override previous values of the variables. - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for wired authenticator -CONFIG_DRIVER_WIRED=y - -# Driver interface for madwifi driver -#CONFIG_DRIVER_MADWIFI=y -#CFLAGS += -I../../madwifi # change to the madwifi source directory - -# Driver interface for drivers using the nl80211 kernel interface -CONFIG_DRIVER_NL80211=y -CONFIG_LIBNL32=y - -# driver_nl80211.c requires libnl. If you are compiling it yourself -# you may need to point hostapd to your version of libnl. -# -#CFLAGS += -I$<path to libnl include files> -#LIBS += -L$<path to libnl library files> - -# Use libnl v2.0 (or 3.0) libraries. -#CONFIG_LIBNL20=y - -# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) -#CONFIG_LIBNL32=y - - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for no driver (e.g., RADIUS server only) -CONFIG_DRIVER_NONE=y - -# IEEE 802.11F/IAPP -CONFIG_IAPP=y - -# WPA2/IEEE 802.11i RSN pre-authentication -CONFIG_RSN_PREAUTH=y - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -CONFIG_IEEE80211W=y - -# Integrated EAP server -CONFIG_EAP=y - -# EAP-MD5 for the integrated EAP server -CONFIG_EAP_MD5=y - -# EAP-TLS for the integrated EAP server -CONFIG_EAP_TLS=y - -# EAP-MSCHAPv2 for the integrated EAP server -CONFIG_EAP_MSCHAPV2=y - -# EAP-PEAP for the integrated EAP server -CONFIG_EAP_PEAP=y - -# EAP-GTC for the integrated EAP server -CONFIG_EAP_GTC=y - -# EAP-TTLS for the integrated EAP server -CONFIG_EAP_TTLS=y - -# EAP-SIM for the integrated EAP server -#CONFIG_EAP_SIM=y - -# EAP-AKA for the integrated EAP server -#CONFIG_EAP_AKA=y - -# EAP-AKA' for the integrated EAP server -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# EAP-PAX for the integrated EAP server -#CONFIG_EAP_PAX=y - -# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-pwd for the integrated EAP server (secure authentication with a password) -#CONFIG_EAP_PWD=y - -# EAP-SAKE for the integrated EAP server -#CONFIG_EAP_SAKE=y - -# EAP-GPSK for the integrated EAP server -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-FAST for the integrated EAP server -# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed -# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., -# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. -CONFIG_EAP_FAST=y - -# Wi-Fi Protected Setup (WPS) -CONFIG_WPS=y -# Enable UPnP support for external WPS Registrars -CONFIG_WPS_UPNP=y -# Enable WPS support with NFC config method -#CONFIG_WPS_NFC=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# Trusted Network Connect (EAP-TNC) -#CONFIG_EAP_TNC=y - -# EAP-EKE for the integrated EAP server -#CONFIG_EAP_EKE=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# RADIUS authentication server. This provides access to the integrated EAP -# server from external hosts using RADIUS. -CONFIG_RADIUS_SERVER=y - -# Build IPv6 support for RADIUS operations -CONFIG_IPV6=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Use the hostapd's IEEE 802.11 authentication (ACL), but without -# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) -#CONFIG_DRIVER_RADIUS_ACL=y - -# IEEE 802.11n (High Throughput) support -CONFIG_IEEE80211N=y - -# Wireless Network Management (IEEE Std 802.11v-2011) -# Note: This is experimental and not complete implementation. -CONFIG_WNM=y - -# IEEE 802.11ac (Very High Throughput) support -CONFIG_IEEE80211AC=y - -# Remove debugging code that is printing out debug messages to stdout. -# This can be used to reduce the size of the hostapd considerably if debugging -# code is not needed. -#CONFIG_NO_STDOUT_DEBUG=y - -# Add support for writing debug log to a file: -f /tmp/hostapd.log -# Disabled by default. -#CONFIG_DEBUG_FILE=y - -# Add support for sending all debug messages (regardless of debug verbosity) -# to the Linux kernel tracing facility. This helps debug the entire stack by -# making it easy to record everything happening from the driver up into the -# same file, e.g., using trace-cmd. -#CONFIG_DEBUG_LINUX_TRACING=y - -# Remove support for RADIUS accounting -#CONFIG_NO_ACCOUNTING=y - -# Remove support for RADIUS -#CONFIG_NO_RADIUS=y - -# Remove support for VLANs -#CONFIG_NO_VLAN=y - -# Enable support for fully dynamic VLANs. This enables hostapd to -# automatically create bridge and VLAN interfaces if necessary. -#CONFIG_FULL_DYNAMIC_VLAN=y - -# Use netlink-based kernel API for VLAN operations instead of ioctl() -# Note: This requires libnl 3.1 or newer. -#CONFIG_VLAN_NETLINK=y - -# Remove support for dumping internal state through control interface commands -# This can be used to reduce binary size at the cost of disabling a debugging -# option. -#CONFIG_NO_DUMP_STATE=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, comment out these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo |