diff options
Diffstat (limited to 'scripts/upgrade/log.txt')
| -rw-r--r-- | scripts/upgrade/log.txt | 579 |
1 files changed, 579 insertions, 0 deletions
diff --git a/scripts/upgrade/log.txt b/scripts/upgrade/log.txt new file mode 100644 index 0000000..550218a --- /dev/null +++ b/scripts/upgrade/log.txt @@ -0,0 +1,579 @@ + + _ _ + _ __ ___ | | (_)_ __ _ ___ __ + | '_ ` _ \| | | | '_ \| | | \ \/ / + | | | | | | |___| | | | | |_| |> < + |_| |_| |_|_____|_|_| |_|\__,_/_/\_\ + +MultiTech Systems mLinux GNU/Linux +mLinux 4.0.0 mtcdt /dev/ttyS0 + + +Version: 4.0.1 +Date: 2018-06-12T11:04:17 +mtcdt login: mtadm +Password: +mtcdt:~$ cd /var/volatile +mtcdt:/var/volatile$ ls +log tmp upgrade-mts-io-2.1.0-3.12.70r20.bin +mtcdt:/var/volatile$ sudo -s +Password: +mtcdt:/var/volatile# mlinux-firmware-upgrade upgrade-mts-io-2.1.0-3.12.70r20.bin +firmware_upgrade: Checking MD5 for install.sh... +-: OK +firmware_upgrade: Rebooting + +Broadcast message from root@mtcdt (ttyS0) (Wed Jun 20 15:33:59 2018): + +The system is going down for reboot NOW! +INIT: Switching to runlevel: 6 +mtcdt:/var/volatile# INIT: Sending processes the TERM signal +Stopping ifplugd: done +Stopping OpenBSD Secure Shell server: sshdstopped /usr/sbin/sshd (pid 557) +. +Stopping GPS (Global Positioning System) daemon gpsd +monit: disabled in /etc/default +Stopping bluetooth +/usr/libexec/bluetooth/bluetoothd +Stopping system message bus: macb f802c000.ethernet eth0: link down +dbus. +Stopping HOSTAP Daemon: no /usr/sbin/hostapd found; none killed +Stopping ntpd: done +Stopping syslogd/klogd: stopped syslogd (pid 604) +stopped klogd (pid 607) +done +bt-pan: disabled in /etc/default +No /usr/bin/python2.7 found running; none killed. +Stopping +Stopping lora-network-server: OK +Stopping Mosquitto... +Stopping crond: OK +Gracefully shutting down php-fpm warning, no pid file found - php-fpm is not running ? +lighttpd: disabled in /etc/default +Deconfiguring network interfaces... ifdown: interface eth0 not configured +done. +Sending all processes the TERM signal... +Sending all processes the KILL signal... +Unmounting remote filesystems... +Found /var/volatile/flash-upgrade/upgrade.bin +Checking MD5s +-: OK + +Starting flash upgrade from /var/volatile/flash-upgrade/upgrade.bin... +install.sh starting in directory /var/volatile +rootfs / rootfs rw 0 0 +/dev/root / jffs2 rw,relatime 0 0 +devtmpfs /dev devtmpfs rw,relatime,size=126852k,nr_inodes=31713,mode=755 0 0 +proc /proc proc rw,relatime 0 0 +sysfs /sys sysfs rw,relatime 0 0 +tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0 +tmpfs /var/volatile tmpfs rw,relatime 0 0 +/dev/mtdblock6 /var/config jffs2 rw,relatime 0 0 +/dev/mtdblock7 /var/oem jffs2 ro,relatime 0 0 +devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0 +bin boot dev etc home lib media mnt opt proc run sbin sys tmp usr var www +lrwxrwxrwx 1 root root 8 Jun 12 12:13 /tmp -> /var/tmp +kernel-module-atmel-mci - 3.12.70-r20.1 +Upgradable kernel is installed +-: OK +Update package list ... /usr/bin/opkg -f local.conf update +Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/Packages.gz. +Updated source 'mlinux-mtcdt'. +/usr/bin/opkg -f local.conf install kernel-module-mts-io +Upgrading kernel-module-mts-io from 2.0.4-r0.0-3.12.70r20.0 to 2.1.0-r0.0-3.12.70r20.0 on root. +Installing kernel-module-mts-io (2.1.0-r0.0) on root. +Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/kernel-module-mts-io_2.1.0-r0.0-3.12.70r20.0_mtcdt.ipk. +Configuring kernel-module-mts-io. +Configuring useradd. +PATH=${PATH}:/sbin:/usr/sbin +/usr/bin/opkg -f local.conf install mts-io-noarch +Upgrading mts-io-noarch from 2.0.4-r0.0-3.12.70r20.0 to 2.1.0-r0.0-3.12.70r20.0 on root. +Installing mts-io-noarch (2.1.0-r0.0) on root. +Downloading file:///var/volatile/flash-upgrade/upgrade-mts-io-2.1.0-3.12.70r20/repo/mtcdt/mts-io-noarch_2.1.0-r0.0-3.12.70r20.0_mtcdt.ipk. +mts-io: Unloading mts-io module +[INFO] mts-io:cleanup:1138: cleaning up.... +[INFO] mts-io:lora_teardown:203: unloading LORA accessory card in port 1 +[INFO] mts-io:mts_io_exit:1221: exiting +OK +mts-io: Unloading mts-io module +OK +update-rc.d: /etc/init.d/mts-io exists during rc.d purge (continuing) + Removing any system startup links for mts-io ... + /etc/rcS.d/S39mts-io +update-rc.d: /etc/init.d/mts-io exists during rc.d purge (continuing) + Removing any system startup links for mts-io ... +Configuring mts-io-noarch. + Adding system startup for /etc/init.d/mts-io. +mts-io: Unloading mts-io module +OK +mts-io: Loading mts-io module +[INFO] mts-io:mts_io_init:1046: init: v2.1.0 +[INFO] mts-io:mts_id_eeprom_load:853: Pruning radio feature from mts-io +[INFO] mts-io:mts_id_eeprom_load:872: Adding WiFi/BT to mts-io driver +[INFO] mts-io:mts_id_eeprom_load:877: Adding GPS to mts-io driver +[INFO] mts-io:mts_id_eeprom_load:889: detected board MTCDT-0.1 +[INFO] mts-io:mts_id_eeprom_load:960: sizeof: 512 +[INFO] mts-io:mts_id_eeprom_load:961: vendor-id: Multi-Tech Systems +[INFO] mts-io:mts_id_eeprom_load:962: product-id: MTCDT-247L +[INFO] mts-io:mts_id_eeprom_load:963: device-id: 12345678 +[INFO] mts-io:mts_id_eeprom_load:964: hw-version: MTCDT-0.1 +[INFO] mts-io:mts_id_eeprom_load:971: mac-addr: 00:08:00:10:00:00 +[INFO] mts-io:mts_id_eeprom_load:973: imei: 123456789123456789 +[INFO] mts-io:mts_id_eeprom_load:974: capa-gps: yes +[INFO] mts-io:mts_id_eeprom_load:975: capa-din: no +[INFO] mts-io:mts_id_eeprom_load:976: capa-dout: no +[INFO] mts-io:mts_id_eeprom_load:977: capa-adc: no +[INFO] mts-io:mts_id_eeprom_load:978: capa-wifi: yes +[INFO] mts-io:mts_id_eeprom_load:979: capa-bluetooth: yes +[INFO] mts-io:mts_id_eeprom_load:980: capa-lora: no +[INFO] mts-io:mts_id_eeprom_load:989: mac-bluetooth: 00:00:00:00:00:00 +[INFO] mts-io:mts_id_eeprom_load:998: mac-wifi: 00:00:00:00:00:00 +[INFO] mts-io:mts_id_eeprom_load:1005: uuid: AAA00000000000000000000000000021 +[INFO] mts-io:load_port:663: accessory card 1 vendor-id: Multi-Tech Systems +[INFO] mts-io:load_port:664: accessory card 1 product-id: MTAC-LORA-H-915 +[INFO] mts-io:load_port:665: accessory card 1 device-id: P87040004 +[INFO] mts-io:load_port:666: accessory card 1 hw-version: MTAC-LORA-1.5 +[INFO] mts-io:load_port:687: accessory card 1 eui: 00:80:00:00:00:00:00:A4 +[INFO] mts-io:lora_setup:60: loading LORA accessory card in port 1 +[INFO] mts-io:lora_setup:90: created link [lora] to [ap1], success:0 +[INFO] mts-io:lora_setup:126: Substitute pins +[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO1 with name AP1_CDONE +[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 70 with number 70 +[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO2 with name AP1_CRESET +[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 71 with number 71 +[INFO] mts-io:lora_setup:189: ap_subdirs[port_index=0] = ce97bc60 ap_subdirs[port_index=0]=bf2b921c +[INFO] mts-io:load_port:622: no accessory card inserted in port 2 +mts-io: Resetting system modules +usb 1-2.2: USB disconnect, device number 8 +usb 1-2.2: new high-speed USB device number 9 using atmel-ehci +usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 +usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 +usb 1-2.2: Product: Wireless USB Network Module +usb 1-2.2: Manufacturer: Redpine Signals, Inc. +usb 1-2.2: SerialNumber: 000000000001 +usb 1-2: USB disconnect, device number 5 +usb 1-2.1: USB disconnect, device number 6 +usb 1-2.2: USB disconnect, device number 9 +usb 1-2: new high-speed USB device number 10 using atmel-ehci +usb 1-2: New USB device found, idVendor=0424, idProduct=2534 +usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 +hub 1-2:1.0: USB hub found +hub 1-2:1.0: 4 ports detected +usb 1-2.1: new high-speed USB device number 11 using atmel-ehci +usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534 +usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 +hub 1-2.1:1.0: USB hub found +hub 1-2.1:1.0: 4 ports detected +usb 1-2.2: new high-speed USB device number 12 using atmel-ehci +usb 1-2.2: new high-speed USB device number 13 using atmel-ehci +usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 +usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 +usb 1-2.2: Product: Wireless USB Network Module +usb 1-2.2: Manufacturer: Redpine Signals, Inc. +usb 1-2.2: SerialNumber: 000000000001 +OK +Rebooting... reboot: Restarting systemþRomBOOT + + +AT91Bootstrap 3.5.3-r3 (Tue Jun 12 10:40:06 CDT 2018) + +NAND: ONFI flash detected +NAND: Manufacturer ID: 0x2c Chip ID: 0x32 +NAND: Disable On-Die ECC +NAND: Initialize PMECC params, cap: 0x4, sector: 0x200 +NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000 +NAND: Done to load image + + +U-Boot 2016.09.01 (Jun 12 2018 - 10:40:13 -0500) + +CPU: AT91SAM9G25 +Crystal frequency: 12 MHz +CPU clock : 400 MHz +Master clock : 133.333 MHz + Watchdog enabled +I2C: ready +DRAM: 256 MiB +WARNING: Caches not enabled +NAND: 256 MiB +MMC: mci: 0 +env_relocate_spec: crc1_ok=0 saved crc=0xffffffff calculated crc=0xf9137807 flags=255 +env_relocate_spec: crc2_ok=0 saved crc=0xffffffff calculated crc=0xf9137807 flags=255 +*** Warning - bad CRC, using default environment + +In: serial +Out: serial +Err: serial +vendor-id: Multi-Tech Systems +product-id: MTCDT-247L +device-id: 12345678 +hw-version: MTCDT-0.1 +mac-addr: 00:08:00:10:00:00 +Net: macb0 +Hit any key to stop autoboot: 0 + +Loading from nand0, offset 0x200000 + Image Name: mLinux/3.12.70/mtcdt + Image Type: ARM Linux Kernel Image (uncompressed) + Data Size: 3095397 Bytes = 3 MiB + Load Address: 20008000 + Entry Point: 20008000 +## Booting kernel from Legacy Image at 22000000 ... + Image Name: mLinux/3.12.70/mtcdt + Image Type: ARM Linux Kernel Image (uncompressed) + Data Size: 3095397 Bytes = 3 MiB + Load Address: 20008000 + Entry Point: 20008000 + Verifying Checksum ... OK + Loading Kernel Image ... OK + +Starting kernel ... + +Uncompressing Linux... done, booting the kernel. +Booting Linux on physical CPU 0x0 +Linux version 3.12.70 (jenkins@frylock) (gcc version 6.2.0 (GCC) ) #1 PREEMPT Tue Jun 12 10:38:30 CDT 2018 +Machine: Atmel AT91SAM (Device Tree), model: Multi-Tech Systems MTCDT +AT91: Detected soc type: at91sam9x5 +AT91: Detected soc subtype: at91sam9g25 +AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000 +Kernel command line: mem=256M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2 +PID hash table entries: 1024 (order: 0, 4096 bytes) +Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) +Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) +Virtual kernel memory layout: + vector : 0xffff0000 - 0xffff1000 ( 4 kB) + fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) + vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) + lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) + modules : 0xbf000000 - 0xc0000000 ( 16 MB) + .text : 0xc0008000 - 0xc0579324 (5573 kB) + .init : 0xc057a000 - 0xc05a4f84 ( 172 kB) + .data : 0xc05a6000 - 0xc05d1720 ( 174 kB) + .bss : 0xc05d172c - 0xc05f1d3c ( 130 kB) +Preemptible hierarchical RCU implementation. +NR_IRQS:16 nr_irqs:16 16 +sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms +Calibrating delay loop... 199.06 BogoMIPS (lpj=995328) +pid_max: default: 32768 minimum: 301 +Mount-cache hash table entries: 512 +Initializing cgroup subsys blkio +CPU: Testing write buffer coherency: ok +Setting up static identity map for 0xc0420670 - 0xc04206c8 +devtmpfs: initialized +pinctrl core: initialized pinctrl subsystem +NET: Registered protocol family 16 +DMA: preallocated 256 KiB pool for atomic coherent allocations +AT91: Power Management (with slow clock mode) +AT91: Starting after software reset +gpio-at91 fffff400.gpio: at address fefff400 +gpio-at91 fffff600.gpio: at address fefff600 +gpio-at91 fffff800.gpio: at address fefff800 +gpio-at91 fffffa00.gpio: at address fefffa00 +pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver +bio: create slab <bio-0> at 0 +at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels +at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels +SCSI subsystem initialized +usbcore: registered new interface driver usbfs +usbcore: registered new interface driver hub +usbcore: registered new device driver usb +i2c-gpio i2c.3: using pins 30 (SDA) and 31 (SCL) +i2c-gpio i2c.4: using pins 64 (SDA) and 65 (SCL) +Switched to clocksource tcb_clksrc +NET: Registered protocol family 2 +TCP established hash table entries: 2048 (order: 2, 16384 bytes) +TCP bind hash table entries: 2048 (order: 1, 8192 bytes) +TCP: Hash tables configured (established 2048 bind 2048) +TCP: reno registered +UDP hash table entries: 256 (order: 0, 4096 bytes) +UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) +NET: Registered protocol family 1 +RPC: Registered named UNIX socket transport module. +RPC: Registered udp transport module. +RPC: Registered tcp transport module. +RPC: Registered tcp NFSv4.1 backchannel transport module. +NFS: Registering the id_resolver key type +Key type id_resolver registered +Key type id_legacy registered +jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. +ROMFS MTD (C) 2007 Red Hat, Inc. +msgmni has been set to 495 +Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) +io scheduler noop registered (default) +io scheduler deadline registered +io scheduler cfq registered +fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL +console [ttyS0] enabled +f8040000.serial: ttyS1 at MMIO 0xf8040000 (irq = 26, base_baud = 8333333) is a ATMEL_SERIAL +brd: module loaded +loop: module loaded +at24_get_setup: found a match for eeprom at 56 +at24 0-0056: 512 byte 24c04 EEPROM, writable, 16 bytes/write +sam9x5: read 512 bytes from id eeprom +at24_get_setup: found a match for eeprom at 50 +at24 1-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write +sam9x5: read 512 bytes from ap1 eeprom +at24_get_setup: found a match for eeprom at 52 +at24 1-0052: 512 byte 24c04 EEPROM, writable, 16 bytes/write +sam9x5: ap2 eeprom read failed: -110 +atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers. +ONFI param page 0 valid +ONFI flash detected +NAND device: Manufacturer ID: 0x2c, Chip ID: 0xaa (Micron MT29F2G08ABBEAHC), 256MiB, page size: 2048, OOB size: 64 +atmel_nand 40000000.nand: ONFI params, minimum required ECC: 4 bits in 512 bytes +atmel_nand 40000000.nand: Initialize PMECC params, cap: 4, sector: 512 +Scanning device for bad blocks +9 ofpart partitions found on MTD device atmel_nand +Creating 9 MTD partitions on "atmel_nand": +0x000000000000-0x000010000000 : "NANDFlash" +0x000000000000-0x000000040000 : "at91bootstrap" +0x000000040000-0x0000000c0000 : "u-Boot" +0x0000000c0000-0x000000160000 : "u-Boot Config" +0x000000160000-0x000000200000 : "u-Boot Redundant Config" +0x000000200000-0x000000800000 : "uImage" +0x000000800000-0x000001000000 : "Config" +0x000001000000-0x000001800000 : "OEM Config" +0x000001800000-0x000010000000 : "Rootfs" +tun: Universal TUN/TAP device driver, 1.6 +tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> +libphy: MACB_mii_bus: probed +macb f802c000.ethernet eth0: Cadence MACB at 0xf802c000 irq 23 (00:08:00:10:00:00) +macb f802c000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=f802c000.etherne:00, irq=-1) +PPP generic driver version 2.4.2 +PPP BSD Compression module registered +PPP Deflate Compression module registered +ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver +ehci-atmel: EHCI Atmel driver +atmel-ehci 700000.ehci: EHCI Host Controller +atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1 +atmel-ehci 700000.ehci: irq 31, io mem 0x00700000 +atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00 +usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 +usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +usb usb1: Product: EHCI Host Controller +usb usb1: Manufacturer: Linux 3.12.70 ehci_hcd +usb usb1: SerialNumber: 700000.ehci +hub 1-0:1.0: USB hub found +hub 1-0:1.0: 3 ports detected +ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver +at91_ohci 600000.ohci: AT91 OHCI +at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2 +at91_ohci 600000.ohci: irq 31, io mem 0x00600000 +usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 +usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +usb usb2: Product: AT91 OHCI +usb usb2: Manufacturer: Linux 3.12.70 ohci_hcd +usb usb2: SerialNumber: at91 +hub 2-0:1.0: USB hub found +hub 2-0:1.0: 3 ports detected +rtc (null): invalid alarm value: 1900-1-1 0:0:0 +at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0 +at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver. +i2c /dev entries driver +at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=0) +Netfilter messages via NETLINK v0.30. +nf_conntrack version 0.5.0 (3964 buckets, 15856 max) +xt_time: kernel timezone is -0000 +ipip: IPv4 over IPv4 tunneling driver +gre: GRE over IPv4 demultiplexor driver +ip_gre: GRE over IPv4 tunneling driver +IPv4 over IPSec tunneling driver +ip_tables: (C) 2000-2006 Netfilter Core Team +TCP: cubic registered +Initializing XFRM netlink socket +NET: Registered protocol family 10 +mip6: Mobile IPv6 +sit: IPv6 over IPv4 tunneling driver +NET: Registered protocol family 17 +NET: Registered protocol family 15 +l2tp_core: L2TP core driver, V2.0 +Key type dns_resolver registered +at91_rtc fffffeb0.rtc: setting system clock to 2018-06-20 20:34:34 UTC (1529526874) +usb 2-3: new full-speed USB device number 2 using at91_ohci +usb 2-3: New USB device found, idVendor=04e2, idProduct=1414 +usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 +jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. +VFS: Mounted root (jffs2 filesystem) readonly on device 31:8. +devtmpfs: mounted +Freeing unused kernel memory: 168K (c057a000 - c05a4000) +INIT: version 2.88 booting +jffs2: notice: (76) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. +jffs2: notice: (76) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. +Starting udev +udevd[86]: starting version 3.2 +udevd[87]: starting eudev-3.2 +atmel_spi f0000000.spi: version: 0x212 +atmel_spi f0000000.spi: Using dma0chan1 (tx) and dma0chan2 (rx) for DMA transfers +atmel_spi f0000000.spi: Atmel SPI Controller at 0xf0000000 (irq 28) +atmel_spi f0000000.spi: master is unqueued, this is deprecated +usbcore: registered new interface driver cdc_acm +cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters +vizzini 2-3:1.0: This device cannot do calls on its own. It is not a modem. +vizzini 2-3:1.0: ttyXRUSB0: XR21v14x usb uart device +vizzini 2-3:1.2: This device cannot do calls on its own. It is not a modem. +vizzini 2-3:1.2: ttyXRUSB1: XR21v14x usb uart device +vizzini 2-3:1.4: This device cannot do calls on its own. It is not a modem. +vizzini 2-3:1.4: ttyXRUSB2: XR21v14x usb uart device +vizzini 2-3:1.6: This device cannot do calls on its own. It is not a modem. +vizzini 2-3:1.6: ttyXRUSB3: XR21v14x usb uart device +usbcore: registered new interface driver vizzini +vizzini: Exar USB UART Driver for XR21V141x +atmel_spi f0004000.spi: version: 0x212 +atmel_spi f0004000.spi: Using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers +atmel_spi f0004000.spi: Atmel SPI Controller at 0xf0004000 (irq 29) +atmel_spi f0004000.spi: master is unqueued, this is deprecated +tmp102 0-0048: initialized +pps_core: LinuxPPS API ver. 1 registered +pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> +pps pps0: new PPS source pps.7.-1 +pps pps0: Registered IRQ 32 as PPS source +atmel_usba_udc 500000.gadget: MMIO registers at 0xf803c000 mapped at d0b5e000 +atmel_usba_udc 500000.gadget: FIFO at 0x00500000 mapped at e1100000 +atmel_mci f0008000.mmc: version: 0x504 +atmel_mci f0008000.mmc: using dma0chan3 for DMA transfers +atmel_mci f0008000.mmc: Atmel MCI controller at 0xf0008000 irq 22, 1 slots +/var/config already mounted +/var/oem already mounted +directory bluetooth operations +directory dnsmasq.d operations +directory modprobe.d operations +mts-io: Loading mts-io module +[INFO] mts-io:mts_io_init:1046: init: v2.1.0 +[INFO] mts-io:mts_id_eeprom_load:853: Pruning radio feature from mts-io +[INFO] mts-io:mts_id_eeprom_load:872: Adding WiFi/BT to mts-io driver +[INFO] mts-io:mts_id_eeprom_load:877: Adding GPS to mts-io driver +[INFO] mts-io:mts_id_eeprom_load:889: detected board MTCDT-0.1 +[INFO] mts-io:mts_id_eeprom_load:960: sizeof: 512 +[INFO] mts-io:mts_id_eeprom_load:961: vendor-id: Multi-Tech Systems +[INFO] mts-io:mts_id_eeprom_load:962: product-id: MTCDT-247L +[INFO] mts-io:mts_id_eeprom_load:963: device-id: 12345678 +[INFO] mts-io:mts_id_eeprom_load:964: hw-version: MTCDT-0.1 +[INFO] mts-io:mts_id_eeprom_load:971: mac-addr: 00:08:00:10:00:00 +[INFO] mts-io:mts_id_eeprom_load:973: imei: 123456789123456789 +[INFO] mts-io:mts_id_eeprom_load:974: capa-gps: yes +[INFO] mts-io:mts_id_eeprom_load:975: capa-din: no +[INFO] mts-io:mts_id_eeprom_load:976: capa-dout: no +[INFO] mts-io:mts_id_eeprom_load:977: capa-adc: no +[INFO] mts-io:mts_id_eeprom_load:978: capa-wifi: yes +[INFO] mts-io:mts_id_eeprom_load:979: capa-bluetooth: yes +[INFO] mts-io:mts_id_eeprom_load:980: capa-lora: no +[INFO] mts-io:mts_id_eeprom_load:989: mac-bluetooth: 00:00:00:00:00:00 +[INFO] mts-io:mts_id_eeprom_load:998: mac-wifi: 00:00:00:00:00:00 +[INFO] mts-io:mts_id_eeprom_load:1005: uuid: AAA00000000000000000000000000021 +[INFO] mts-io:load_port:663: accessory card 1 vendor-id: Multi-Tech Systems +[INFO] mts-io:load_port:664: accessory card 1 product-id: MTAC-LORA-H-915 +[INFO] mts-io:load_port:665: accessory card 1 device-id: P87040004 +[INFO] mts-io:load_port:666: accessory card 1 hw-version: MTAC-LORA-1.5 +[INFO] mts-io:load_port:687: accessory card 1 eui: 00:80:00:00:00:00:00:A4 +[INFO] mts-io:lora_setup:60: loading LORA accessory card in port 1 +[INFO] mts-io:lora_setup:90: created link [lora] to [ap1], success:0 +[INFO] mts-io:lora_setup:126: Substitute pins +[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO1 with name AP1_CDONE +[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 70 with number 70 +[INFO] mts-io:lora_setup:131: LORA H: Replace name AP1_GPIO2 with name AP1_CRESET +[INFO] mts-io:lora_setup:132: LORA H: Replace pin number 71 with number 71 +[INFO] mts-io:lora_setup:189: ap_subdirs[port_index=0] = cf0ccca0 ap_subdirs[port_index=0]=bf0d521c +[INFO] mts-io:load_port:622: no accessory card inserted in port 2 +mts-io: Resetting system modules +usb 1-2: new high-speed USB device number 2 using atmel-ehci +usb 1-2: New USB device found, idVendor=0424, idProduct=2534 +usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 +hub 1-2:1.0: USB hub found +hub 1-2:1.0: 4 ports detected +usb 1-2.1: new high-speed USB device number 3 using atmel-ehci +usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534 +usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 +hub 1-2.1:1.0: USB hub found +hub 1-2.1:1.0: 4 ports detected +usb 1-2.2: new high-speed USB device number 4 using atmel-ehci +usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 +usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 +usb 1-2.2: Product: Wireless USB Network Module +usb 1-2.2: Manufacturer: Redpine Signals, Inc. +usb 1-2.2: SerialNumber: 000000000001 +usb 1-2: USB disconnect, device number 2 +usb 1-2.1: USB disconnect, device number 3 +usb 1-2.2: USB disconnect, device number 4 +usb 1-2: new high-speed USB device number 5 using atmel-ehci +usb 1-2: New USB device found, idVendor=0424, idProduct=2534 +usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 +hub 1-2:1.0: USB hub found +hub 1-2:1.0: 4 ports detected +usb 1-2.1: new high-speed USB device number 6 using atmel-ehci +usb 1-2.1: New USB device found, idVendor=0424, idProduct=2534 +usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 +hub 1-2.1:1.0: USB hub found +hub 1-2.1:1.0: 4 ports detected +usb 1-2.2: new high-speed USB device number 7 using atmel-ehci +usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 +usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 +usb 1-2.2: Product: Wireless USB Network Module +usb 1-2.2: Manufacturer: Redpine Signals, Inc. +usb 1-2.2: SerialNumber: 000000000001 +OK +[INFO] ../../git/src/eeprom_main.c:main:580: loaded id eeprom from /sys/bus/i2c/devices/i2c-0/0-0056/eeprom successfully +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:291: sizeof: 512 +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:292: vendor-id: Multi-Tech Systems +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:293: product-id: MTCDT-247L +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:294: device-id: 12345678 +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:295: hw-version: MTCDT-0.1 +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:302: mac-addr: 00:08:00:10:00:00 +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:303: imei: 123456789123456789 +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:304: capa-gps: yes +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:305: capa-din: no +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:306: capa-dout: no +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:307: capa-adc: no +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:308: capa-wifi: yes +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:309: capa-bluetooth: yes +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:310: capa-lora: no +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:318: mac-bluetooth: 00:00:00:00:00:00 +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:325: mac-wifi: 00:00:00:00:00:00 +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:331: uuid: AAA00000000000000000000000000021 +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:341: lora-eui: "00:00:00:00:00:00:00:00" +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:343: lora-product-id: +[INFO] ../../git/src/eeprom_main.c:mts_id_eeprom_inspect:344: lora-hw-version: +Reading accessory cards data +Adding accessory cards data +rs9113: Loading rs9113 modules with COEX=6 and Country=0 +usb 1-2.2: USB disconnect, device number 7 +cfg80211: Calling CRDA to update world regulatory domain +usb 1-2.2: new high-speed USB device number 8 using atmel-ehci +usb 1-2.2: New USB device found, idVendor=1618, idProduct=9113 +usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 +usb 1-2.2: Product: Wireless USB Network Module +usb 1-2.2: Manufacturer: Redpine Signals, Inc. +usb 1-2.2: SerialNumber: 000000000001 +Bluetooth: Core ver 2.16 +NET: Registered protocol family 31 +Bluetooth: HCI device and connection manager initialized +Bluetooth: HCI socket layer initialized +Bluetooth: L2CAP socket layer initialized +Bluetooth: SCO socket layer initialized +onebox_wlan_nongpl: module license 'unspecified' taints kernel. +Disabling lock debugging due to kernel taint +usbcore: registered new interface driver Onebox-USB +WLAN protocol selected +BT protocol selected +Driver initialization is done +OK +INIT: Entering runlevel: 5 +Configuring network interfaces... IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready +done. +Starting system message bus: dbus. +Starting ifplugd: Starting /usr/sbin/ifplugd... +done +macb f802c000.ethernet eth0: link up (100/Full) +IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready +Starting OpenBSD Secure Shell server: sshd +done. +Starting bluetooth +Bluetooth: BNEP (Ethernet Emulation) ver 1.3 +Bluetooth: BNEP filters: protocol multicast +Bluetooth: BNEP socket layer initialized +bluetoothd +Would start /usr/sbin/ntpd -u ntp:ntp -p /var/run/ntp.pid -g -c /etc/ntp.conf , and add -20 to the priority. +gpsd_ubx_settime: GPS does not have a fix yet. Try again later. +Starting syslogd/klogd: done +bt-pan: disabled in /etc/default +Starting rfcomm +/usr/sbin/start-stop-daemon -S -p /run/rfcomm.pid -x /usr/bin/python2.7 -b -- /usr/libexec/bluetooth/rfcomm --login |