1 files changed, 0 insertions, 67 deletions
diff --git a/recipes-core/multitech/config/ppp/peers/l4n1_chat_non_vz b/recipes-core/multitech/config/ppp/peers/l4n1_chat_non_vz
deleted file mode 100644
index 76f3aae..0000000
--- a/recipes-core/multitech/config/ppp/peers/l4n1_chat_non_vz
+++ /dev/null
@@ -1,67 +0,0 @@
-#----------------------------------------
-# Do NOT use this CHAT script with
-# Verizon wireless.  It will bind
-# this SIM and device to the wrong
-# APN.
-#
-# mlinux-set-apn can be used to set
-# the APN.
-#
-# mlinux-switch-cell-fw can be used
-# to switch the firmware settings
-# and set the correct CHAT script.
-#
-# # mlinux-set-apn "APN"
-#
-# And to switch the firmware to Verizon:
-# # mlinux-switch-cell-fw 1
-#
-# And to switch to AT&T:
-# # mlinux-switch-cell-fw 0
-#----------------------------------------
-SAY "L4N1 chat not for Verizon\n"
-ECHO OFF
-ABORT 'NO DIAL TONE'
-ABORT 'NO DIALTONE'
-ABORT 'NO ANSWER'
-ABORT 'NO CARRIER'
-ABORT 'DELAYED'
-ABORT 'VOICE'
-ABORT 'BUSY'
-'' 'AT'
-OK 'ATZ'
-OK 'AT+CSQ'
-# ----------------------------------
-# Set the APN for your provider here
-# Note that a comment starting with
-# #MT AT+CGDCONT=
-# will be interpretted by
-# /usr/libexec/ppp/chat_wrapper
-# as the intended context
-# setting.  Make the context number
-# (after the =) match the
-# dialer number context.
-# If the context changes, ppp/chat_wrapper
-# handles disconnecting the modem
-# from the network during the update,
-# which is required
-# by some modem firmware.
-# The chat script will be executed
-# after the ppp/chat_wrapper script
-# re-registers the modem.
-# The context will only be set if the
-# modem settings do not match the
-# settings here.
-# Lines starting with # MT are ignored.
-# ----------------------------------
-# MT AT+CGDCONT=1,"IP","proxy"
-# MT AT+CGDCONT=1,"IP","ISP.CINGULAR"
-# MT AT+CGDCONT=1,"IP","internet2.voicestream.com"
-#MT AT+CGDCONT=1,"IP","phone"
-OK 'AT+CGDCONT?'
-SAY "Dialing...\n"
-OK 'ATD*99***1#'
-SAY "Waiting for CONNECT...\n"
-TIMEOUT 120
-CONNECT ''
-SAY "Connected\n"