diff options
Diffstat (limited to 'recipes-core/multitech/config/ppp/peers/README.fwswitch')
-rw-r--r-- | recipes-core/multitech/config/ppp/peers/README.fwswitch | 76 |
1 files changed, 0 insertions, 76 deletions
diff --git a/recipes-core/multitech/config/ppp/peers/README.fwswitch b/recipes-core/multitech/config/ppp/peers/README.fwswitch deleted file mode 100644 index 47ef5ef..0000000 --- a/recipes-core/multitech/config/ppp/peers/README.fwswitch +++ /dev/null @@ -1,76 +0,0 @@ -LNA3/L4N1 firmware/SIM switching instructions - -To automatically set the APN, bring up the system -with the desired SIM installed (AT&T or Verizon). - -Execute with a Verizon SIM installed -(switch to Verizon Firmware and Chat): - -root@mtcap:~# /usr/sbin/mlinux-switch-apn -Cellular radio is ready. -Setting chat script to /etc/ppp/peers/lna3_chat_vz - -root@mtcap:~# ls -ld /etc/ppp/peers/lna3_chat -lrwxrwxrwx 1 root root 27 Aug 31 16:30 /etc/ppp/peers/lna3_chat -> /etc/ppp/peers/lna3_chat_vz - -root@mtcap:~# radio-query --active-firmware -1 - -Firmware image 1 is Verizon, and lna3_chat should point at the Verizon chat scripts lna3_chat_vz. - -To switch to an AT&T SIM (the default): - -root@mtcap:~# mlinux-switch-apn -Cellular radio is ready. -Setting chat script to /etc/ppp/peers/lna3_chat_non_vz - -It is critical that you do not use an AT&T chat script with a Verizon SIM, -because it will set the wrong APN, and it will be remembered as belonging -to the SIM/device combination. - - -The following are not recommended: -To manually set the chat script: - -mlinux-switch-apn [0|1] - -To manually switch the firmware setting: -mlinux-switch-cell-fw [0|1|-1] [timeout] - -This command sets the chat to this readme file. Then it will be needed to -set the symlink for the chat script, which can be done by using mlinux-switch-apn -with 0 for AT&T, and 1 for Verizon. - - - - - - -Put the desired SIM into the device. - -The default APN is "phone" for the LNA3. - -Set the APN using (does nothing for Sprint or Verizon chat scripts): - -# mlinux-set-apn "YOURAPN" - -Do not put a "AT+CGDCONT" in the lna3_chat_vz script or -l4n1_chat_vz script. It will cause trouble. - -To pick a firmware based on the - -To switch to the Verizon firmware and chat script: - - # mlinux-switch-cell-fw 1 - -To switch to the non-Verizon firmware and chat script: - - # mlinux-switch-cell-fw 0 - -Verizon provided APN setting over the air. If you set the APN on a Verizon SIM, -and they push a new APN, you will need to change the APN on the device. - -It is best not to set the APN. To switch from a manually set APN or incorrect APN -to letting Verizon set the APN, remove the SIM, and put it in another device. -Then register with the Verizon network. With the APN setting removed, put the SIM -back into this device. |