Remove unnecessary recipes

15 files changed, 0 insertions, 1943 deletions

diff --git a/recipes-connectivity/hostapd/files/cfg80211.conf b/recipes-connectivity/hostapd/files/cfg80211.conf
deleted file mode 100644
index 4b6d264..0000000
--- a/recipes-connectivity/hostapd/files/cfg80211.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-# IEEE 802.11 Regulatory Domain for cfg80211 driver
-# AU -- Australia
-# AT -- Austria
-# BE -- Belgium
-# US -- USA
-# 00 -- World
-options cfg80211 ieee80211_regdom=00
diff --git a/recipes-connectivity/hostapd/hostapd/default b/recipes-connectivity/hostapd/hostapd/default
deleted file mode 100644
index a274de1..0000000
--- a/recipes-connectivity/hostapd/hostapd/default
+++ /dev/null
@@ -1,6 +0,0 @@
-# set to "yes" to start hostapd on boot
-START_ON_BOOT="no"
-# Stuff to creat the device if needed.
-DEV=wifi1
-PREUP="[[ -d /sys/class/net/${DEV} ]] || (ifdown wifi1;/opt/rs9113/onebox_util rpine0 create_vap ${DEV} ap;rfkill unblock all)"
-POSTUP="ifup wifi1"
diff --git a/recipes-connectivity/hostapd/hostapd/defconfig b/recipes-connectivity/hostapd/hostapd/defconfig
deleted file mode 100644
index 3a447c6..0000000
--- a/recipes-connectivity/hostapd/hostapd/defconfig
+++ /dev/null
@@ -1,148 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for Prism54 driver
-CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-CONFIG_LIBNL32=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-CONFIG_WPS_UPNP=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# IEEE 802.11ac (Very High Throughput) support
-CONFIG_IEEE80211AC=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
diff --git a/recipes-connectivity/hostapd/hostapd/defconfig.orig b/recipes-connectivity/hostapd/hostapd/defconfig.orig
deleted file mode 100644
index a62bec4..0000000
--- a/recipes-connectivity/hostapd/hostapd/defconfig.orig
+++ /dev/null
@@ -1,148 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for Prism54 driver
-CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-CONFIG_LIBNL32=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# IEEE 802.11ac (Very High Throughput) support
-CONFIG_IEEE80211AC=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
diff --git a/recipes-connectivity/hostapd/hostapd/hostapd.service b/recipes-connectivity/hostapd/hostapd/hostapd.service
deleted file mode 100644
index 151c050..0000000
--- a/recipes-connectivity/hostapd/hostapd/hostapd.service
+++ /dev/null
@@ -1,11 +0,0 @@
-[Unit]
-Description=Hostapd IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
-After=network.target
-
-[Service]
-Type=forking
-PIDFile=/run/hostapd.pid
-ExecStart=@SBINDIR@/hostapd @SYSCONFDIR@/hostapd.conf -P /run/hostapd.pid -B
-
-[Install]
-WantedBy=multi-user.target
diff --git a/recipes-connectivity/hostapd/hostapd/init b/recipes-connectivity/hostapd/hostapd/init
deleted file mode 100644
index 04fd2d0..0000000
--- a/recipes-connectivity/hostapd/hostapd/init
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/bin/sh
-DAEMON=/usr/sbin/hostapd
-NAME=hostapd
-DESC="HOSTAP Daemon"
-ARGS="/etc/hostapd.conf -B"
-
-test -f $DAEMON || exit 0
-
-[ -f /etc/default/$NAME ] && . /etc/default/$NAME
-
-set -e
-
-# source function library
-. /etc/init.d/functions
-
-delay_stop() {
-	count=0
-	while [ $count -lt 9 ] ; do
-	        if pidof $DAEMON >/dev/null; then
-	                sleep 1
-	        else
-	                return 0
-	        fi
-		count=`expr $count + 1`
-	done
-	echo "Failed to stop $DESC."
-	return 1
-}
-
-case "$1" in
-    start)
-        if [ "$START_ON_BOOT" != "yes" ]; then
-	    exit 0
-        fi
-        if [[ -n $PREUP ]] ; then
-		bash -c "$PREUP"
-        fi
-	echo -n "Starting $DESC: "
-	start-stop-daemon -S -x $DAEMON -- $ARGS
-        if [[ -n $POSTUP ]] ; then
-                bash -c "$POSTUP"
-        fi
-	echo "$NAME."
-	;;
-    stop)
-	echo -n "Stopping $DESC: "
-	start-stop-daemon -K --oknodo -x $DAEMON
-	echo "$NAME."
-	;;
-    restart)
-	$0 stop
-	delay_stop && $0 start
-	;;
-    reload)
-	echo -n "Reloading $DESC: "
-	killall -HUP $(basename ${DAEMON})
-	echo "$NAME."
-	;;
-    status)
-	status $DAEMON
-	exit $?
-	;;
-    *)
-	echo "Usage: $0 {start|stop|restart|reload|status}"
-	exit 1
-	;;
-esac
-
-exit 0
diff --git a/recipes-connectivity/hostapd/hostapd_%.bbappend b/recipes-connectivity/hostapd/hostapd_%.bbappend
deleted file mode 100644
index d94e2ad..0000000
--- a/recipes-connectivity/hostapd/hostapd_%.bbappend
+++ /dev/null
@@ -1,6 +0,0 @@
-SRC_URI += "file://cfg80211.conf"
-
-do_install_append() {
-	install -d ${D}{sysconfdir}/modprobe.d
-	install -m 644 -D ${WORKDIR}/cfg80211.conf ${D}${sysconfdir}/modprobe.d/cfg80211.conf
-}
diff --git a/recipes-connectivity/hostapd/hostapd_2.8.bb b/recipes-connectivity/hostapd/hostapd_2.8.bb
deleted file mode 100644
index 15884d0..0000000
--- a/recipes-connectivity/hostapd/hostapd_2.8.bb
+++ /dev/null
@@ -1,51 +0,0 @@
-SUMMARY = "User space daemon for extended IEEE 802.11 management"
-HOMEPAGE = "http://w1.fi/hostapd/"
-SECTION = "kernel/userland"
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://hostapd/README;md5=1ec986bec88070e2a59c68c95d763f89"
-
-DEPENDS = "libnl openssl"
-
-SRC_URI = " \
-    http://w1.fi/releases/hostapd-${PV}.tar.gz \
-    file://defconfig \
-    file://init \
-    file://hostapd.service \
-"
-
-SRC_URI[md5sum] = "ed2c254e5f400838cb9d8e7b6e43b86c"
-SRC_URI[sha256sum] = "929f522be6eeec38c53147e7bc084df028f65f148a3f7e4fa6c4c3f955cee4b0"
-
-S = "${WORKDIR}/hostapd-${PV}"
-B = "${WORKDIR}/hostapd-${PV}/hostapd"
-
-inherit update-rc.d systemd pkgconfig distro_features_check
-
-CONFLICT_DISTRO_FEATURES = "openssl-no-weak-ciphers"
-
-INITSCRIPT_NAME = "hostapd"
-
-SYSTEMD_SERVICE_${PN} = "hostapd.service"
-SYSTEMD_AUTO_ENABLE_${PN} = "disable"
-
-do_configure_append() {
-    install -m 0644 ${WORKDIR}/defconfig ${B}/.config
-}
-
-do_compile() {
-    export CFLAGS="-MMD -O2 -Wall -g"
-    export EXTRA_CFLAGS="${CFLAGS}"
-    make V=1
-}
-
-do_install() {
-    install -d ${D}${sbindir} ${D}${sysconfdir}/init.d ${D}${systemd_unitdir}/system/
-    install -m 0644 ${B}/hostapd.conf ${D}${sysconfdir}
-    install -m 0755 ${B}/hostapd ${D}${sbindir}
-    install -m 0755 ${B}/hostapd_cli ${D}${sbindir}
-    install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/hostapd
-    install -m 0644 ${WORKDIR}/hostapd.service ${D}${systemd_unitdir}/system/
-    sed -i -e 's,@SBINDIR@,${sbindir},g' -e 's,@SYSCONFDIR@,${sysconfdir},g' ${D}${systemd_unitdir}/system/hostapd.service
-}
-
-CONFFILES_${PN} += "${sysconfdir}/hostapd.conf"
diff --git a/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-replace-systemd-install-Alias-with-WantedBy.patch b/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-replace-systemd-install-Alias-with-WantedBy.patch
deleted file mode 100644
index a476cf0..0000000
--- a/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-replace-systemd-install-Alias-with-WantedBy.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 94c401733a5a3d294cc412671166e6adfb409f53 Mon Sep 17 00:00:00 2001
-From: Joshua DeWeese <jdeweese@hennypenny.com>
-Date: Wed, 30 Jan 2019 16:19:47 -0500
-Subject: [PATCH] replace systemd install Alias with WantedBy
-
-According to the systemd documentation "WantedBy=foo.service in a
-service bar.service is mostly equivalent to
-Alias=foo.service.wants/bar.service in the same file." However,
-this is not really the intended purpose of install Aliases.
-
-Upstream-Status: Submitted [hostap@lists.infradead.org]
-
-Signed-off-by: Joshua DeWeese <jdeweese@hennypenny.com>
----
- wpa_supplicant/systemd/wpa_supplicant-nl80211.service.arg.in | 2 +-
- wpa_supplicant/systemd/wpa_supplicant-wired.service.arg.in   | 2 +-
- wpa_supplicant/systemd/wpa_supplicant.service.arg.in         | 2 +-
- 3 files changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/wpa_supplicant/systemd/wpa_supplicant-nl80211.service.arg.in b/wpa_supplicant/systemd/wpa_supplicant-nl80211.service.arg.in
-index 03ac507..da69a87 100644
---- a/wpa_supplicant/systemd/wpa_supplicant-nl80211.service.arg.in
-+++ b/wpa_supplicant/systemd/wpa_supplicant-nl80211.service.arg.in
-@@ -12,4 +12,4 @@ Type=simple
- ExecStart=@BINDIR@/wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant-nl80211-%I.conf -Dnl80211 -i%I
- 
- [Install]
--Alias=multi-user.target.wants/wpa_supplicant-nl80211@%i.service
-+WantedBy=multi-user.target
-diff --git a/wpa_supplicant/systemd/wpa_supplicant-wired.service.arg.in b/wpa_supplicant/systemd/wpa_supplicant-wired.service.arg.in
-index c8a744d..ca3054b 100644
---- a/wpa_supplicant/systemd/wpa_supplicant-wired.service.arg.in
-+++ b/wpa_supplicant/systemd/wpa_supplicant-wired.service.arg.in
-@@ -12,4 +12,4 @@ Type=simple
- ExecStart=@BINDIR@/wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant-wired-%I.conf -Dwired -i%I
- 
- [Install]
--Alias=multi-user.target.wants/wpa_supplicant-wired@%i.service
-+WantedBy=multi-user.target
-diff --git a/wpa_supplicant/systemd/wpa_supplicant.service.arg.in b/wpa_supplicant/systemd/wpa_supplicant.service.arg.in
-index 7788b38..55d2b9c 100644
---- a/wpa_supplicant/systemd/wpa_supplicant.service.arg.in
-+++ b/wpa_supplicant/systemd/wpa_supplicant.service.arg.in
-@@ -12,4 +12,4 @@ Type=simple
- ExecStart=@BINDIR@/wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant-%I.conf -i%I
- 
- [Install]
--Alias=multi-user.target.wants/wpa_supplicant@%i.service
-+WantedBy=multi-user.target
--- 
-2.7.4
-
diff --git a/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant b/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant
deleted file mode 100644
index 6ff4dd8..0000000
--- a/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant
+++ /dev/null
@@ -1 +0,0 @@
-d root root 0700 /var/run/wpa_supplicant none
diff --git a/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig b/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig
deleted file mode 100644
index f04e398..0000000
--- a/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig
+++ /dev/null
@@ -1,552 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-#	-I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
-#CFLAGS += -I../../include/wireless
-
-# Driver interface for madwifi driver
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_MADWIFI=y
-# Set include directory to the madwifi source tree
-#CFLAGS += -I../../madwifi
-
-# Driver interface for ndiswrapper
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-# CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for old Broadcom driver
-# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
-# Linux wireless extensions and does not need (or even work) with the old
-# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100/2200 driver
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_IPW=y
-
-# Driver interface for Ralink driver
-#CONFIG_DRIVER_RALINK=y
-
-# Driver interface for generic Linux wireless extensions
-# Note: WEXT is deprecated in the current Linux kernel version and no new
-# functionality is added to it. nl80211-based interface is the new
-# replacement for WEXT and its use allows wpa_supplicant to properly control
-# the driver to improve existing functionality like roaming and to support new
-# functionality.
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-CONFIG_LIBNL32=y
-
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Driver interface for no driver (e.g., WPS ER only)
-#CONFIG_DRIVER_NONE=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
-# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
-# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-pwd (secure authentication using only a password)
-#CONFIG_EAP_PWD=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable WSC 2.0 support
-#CONFIG_WPS2=y
-# Enable WPS external registrar functionality
-#CONFIG_WPS_ER=y
-# Disable credentials for an open network by default when acting as a WPS
-# registrar.
-#CONFIG_WPS_REG_DISABLE_OPEN=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# EAP-EKE
-#CONFIG_EAP_EKE=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
-#CONFIG_HT_OVERRIDES=y
-
-# Support VHT overrides (disable VHT, mask MCS rates, etc.)
-#CONFIG_VHT_OVERRIDES=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Include internal line edit mode in wpa_cli. This can be used as a replacement
-# for GNU Readline to provide limited command line editing and history support.
-#CONFIG_WPA_CLI_EDIT=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#	path is given on command line, not here; this option is just used to
-#	select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-#CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-#CONFIG_MAIN=main
-
-# Select wrapper for operatins system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-#CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-#CONFIG_ELOOP=eloop
-
-# Should we use poll instead of select? Select is used by default.
-#CONFIG_ELOOP_POLL=y
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-#CONFIG_L2_PACKET=linux
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# none = Empty template
-#CONFIG_TLS=openssl
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used. It should be noted that some existing TLS v1.0 -based
-# implementation may not be compatible with TLS v1.1 message (ClientHello is
-# sent prior to negotiating which version will be used)
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms. It should be
-# noted that some existing TLS v1.0 -based implementation may not be compatible
-# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
-# will be used)
-#CONFIG_TLSV12=y
-
-# If CONFIG_TLS=internal is used, additional library