| Age | Commit message (Collapse) | Author | Files |
|---|
|
- Added support for Kerlink 868 27dBm gateway
- Updated global_conf.eu868.json (in packet logger) to new LoRaWAN frequency plan
- Added version numbers to AGC, arbiter and calibration firmware (those versions are checked at startup)
- Added test_loragw_cal to test radio calibrations
- Fixed minor bug in error coverage in register read/write functions
/!\ warning: Kerlink 868 27dBm gateway includes a FPGA that MUST be programmed before running any application
|
|
- Fixed bug with 250kHz and 500 kHz TX filtering
- Adjusted FSK timestamp calibration in RX for accurate RX/TX alignment
- Added lgw_abort_tx() function to stop a TX at any time (scheduled or ongoing)
- Added support for user-settable FSK sync word (same for RX and TX)
- Added support for the Chinese 780 MHz band
- Added support for Kerlink 433 gateway
- Added support for Cisco 433, 470 & 780 MHz concentrators boards
|
|
- Adding option to discriminate LoRa MAC networks from private LoRa networks at PHY level.
|
|
- Enabling support for FSK per LoRa MAC specification
- Adjusting TX and RX calibration set on 868 reference board
- Added specific RX/TX calibration set for Kerlink 868 "IoT station" gateway
- Changed default SPI port for native driver to Kerlink SPI device number
|
|
- Added calibration routine to optimize RF performance
- Added support for SX1301 433 MHz reference board
- Improved AGC firmware
- Improved RSSI accuracy
- Improved utilities Makefile
|
|
- Added TX power management.
- Added full support for SX1301 reference board.
- Changed build system with configuration for multiple chip/radio/band support.
- SX125x bandwidth set to 1MHz by default (was 800 kHz).
- Solved warnings with 64b integer printf when compiling on x86_64.
- Renamed helper programs to reduce the concentrator vs. gateway confusion.
|
|
- Added feature: new GPS module in the library for synchronization
- Removed feature: no more missed deadline detection in TX because of incompatibility with GPS
- Added documentation for GPS and legal notice
- Added flags in Makefiles for easier cross-compilation
|
|
- switched FTDI as default SPI phy layer in library.cfg
- fixed a bug in TX power control; still only two TW power available, 14 and 24 dBm
- changed library directory name from loragw_hal to libloragw to follow usual conventions
|
|
- API: change memory allocation for payload, they are now part of the struct for TX/RX, no need to malloc/free
- reduced number of SPI transactions to fetch a packet (improved number a packets par second that can be downloaded from gateway)
- streamlined build process, main target is now a static library: libloragw.a
- All RX chains can use any of the two radios now
- FSK is available and working in TX and RX (variable length mode)
- Calibrated RSSI for FSK
- lgw_connect now check the CHIP_ID
- Added a license file and a changelog
- Added a function returning a version string to allow identification of the version/options once compiled
|
