| Age | Commit message (Collapse) | Author | Files |
|---|
|
- Added TX power management.
- Added full support for SX1301 reference board.
- Changed build system with configuration for multiple chip/radio/band support.
- SX125x bandwidth set to 1MHz by default (was 800 kHz).
- Solved warnings with 64b integer printf when compiling on x86_64.
- Renamed helper programs to reduce the concentrator vs. gateway confusion.
|
|
- Added a GPIO toggle on the FTDI SPI module to reset the SX1301 board.
|
|
with SF=0 (CRC error on Lora header).
Fixed buggy timezone handling
HAL does not return NaN anymore for SNR and RSSI if measurements are not available (return -128).
|
|
- Added feature: new GPS module in the library for synchronization
- Removed feature: no more missed deadline detection in TX because of incompatibility with GPS
- Added documentation for GPS and legal notice
- Added flags in Makefiles for easier cross-compilation
|
|
- Fixed bug 'no TX on radio B' (rfch 1)
- Added feature: concentrator processing delay compensation in the receive() function for accurate 'end of packet' even timestamping
- Added feature: TX 'start delay' compensation in the send() function to emit packet exactly on target timestamp
- Added feature: timestamp counter verification in send() function, return an error if scheduling was too late
- Switched license to 'Revised BSD'
|
|
- switched FTDI as default SPI phy layer in library.cfg
- fixed a bug in TX power control; still only two TW power available, 14 and 24 dBm
- changed library directory name from loragw_hal to libloragw to follow usual conventions
|
|
- API: lgw_receive now return info on RX frequency and RF path for each packet (no need to keep track of RF/IF settings)
- Unified some portion of the code with the 470 MHz variant of the HAL (use SX1255 radios instead of SX1257)
- Improved AGC and ARB firmwares
- Adding -Wall -Wextra for compilation, fixing all the new warnings for cleaner code
- Fixed bugs in handling of FSK datarate
- test_loragw_hal now dumps the content of all Lora registers after configuration in reg_dump.log
|
|
- API: change memory allocation for payload, they are now part of the struct for TX/RX, no need to malloc/free
- reduced number of SPI transactions to fetch a packet (improved number a packets par second that can be downloaded from gateway)
- streamlined build process, main target is now a static library: libloragw.a
- All RX chains can use any of the two radios now
- FSK is available and working in TX and RX (variable length mode)
- Calibrated RSSI for FSK
- lgw_connect now check the CHIP_ID
- Added a license file and a changelog
- Added a function returning a version string to allow identification of the version/options once compiled
|
