v1.3.0v1.3.0

- Added TX power management.
- Added full support for SX1301 reference board.
- Changed build system with configuration for multiple chip/radio/band support.
- SX125x bandwidth set to 1MHz by default (was 800 kHz).
- Solved warnings with 64b integer printf when compiling on x86_64.
- Renamed helper programs to reduce the concentrator vs. gateway confusion.

1 files changed, 0 insertions, 76 deletions

diff --git a/README b/README
deleted file mode 100644
index 7ab10c0..0000000
--- a/README
+++ /dev/null
@@ -1,76 +0,0 @@
-	 / _____)             _              | |    
-	( (____  _____ ____ _| |_ _____  ____| |__  
-	 \____ \| ___ |    (_   _) ___ |/ ___)  _ \ 
-	 _____) ) ____| | | || |_| ____( (___| | | |
-	(______/|_____)_|_|_| \__)_____)\____)_| |_|
-		©2013 Semtech-Cycleo
-
-Lora Gateway HAL project
-=========================
-
-1. Core library: libloragw
----------------------------
-
-This directory contains the sources of the library to build a gateway based on 
-a Semtech Lora multi-channel RF receiver.
-Once compiled all the code is contained in the libloragw.a file that will be 
-statically linked (ie. integrated in the final executable).
-
-The library also comes with a bunch of basic tests programs that are used to 
-test the different sub-modules of the library.
-
-2. Helper programs
--------------------
-
-Those programs are included in the project to provide examples on how to use 
-the HAL library, and to help the system builder test different parts of it.
-
-### 2.1. loragw_band_survey ###
-
-This software is used to scan the RF band and measure background RSSI and some
-measurement of interferer pattern.
-
-### 2.2. loragw_pkt_logger ###
-
-This software is used to set up a Lora concentrator using a JSON configuration
-file and then record all the packets received in a log file, indefinitely, until
-the user stops the application.
-
-### 2.3. loragw_spi_stress ###
-
-This software is used to check the reliability of the link between the host
-platform (on which the program is run) and the Lora concentrator register file
-that is the interface through which all interaction with the Lora concentrator
-happens.
-
-### 2.4. loragw_tx_test ###
-
-This software is used to send test packets with a Lora concentrator. The packets
-contain little information, on no protocol (ie. MAC address) information but
-can be used to assess the functionality of a gateway downlink using other
-gateways as receivers.
-
-3. Legal notice
-----------------
-
-The information presented in this project documentation does not form part of 
-any quotation or contract, is believed to be accurate and reliable and may be 
-changed without notice. No liability will be accepted by the publisher for any 
-consequence of its use. Publication thereof does not convey nor imply any 
-license under patent or other industrial or intellectual property rights. 
-Semtech assumes no responsibility or liability whatsoever for any failure or 
-unexpected operation resulting from misuse, neglect improper installation, 
-repair or improper handling or unusual physical or electrical stress 
-including, but not limited to, exposure to parameters beyond the specified 
-maximum ratings or operation outside the specified range. 
-
-SEMTECH PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED OR WARRANTED TO BE 
-SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER 
-CRITICAL APPLICATIONS. INCLUSION OF SEMTECH PRODUCTS IN SUCH APPLICATIONS IS 
-UNDERSTOOD TO BE UNDERTAKEN SOLELY AT THE CUSTOMER’S OWN RISK. Should a 
-customer purchase or use Semtech products for any such unauthorized 
-application, the customer shall indemnify and hold Semtech and its officers, 
-employees, subsidiaries, affiliates, and distributors harmless against all 
-claims, costs damages and attorney fees which could arise.
-
-*EOF*
\ No newline at end of file