1 files changed, 0 insertions, 64 deletions
diff --git a/multitech/recipes/at91bootstrap/at91bootstrap-3.5.3/mtocgd/at91bootstrap-3.5.2-mtocgd.patch b/multitech/recipes/at91bootstrap/at91bootstrap-3.5.3/mtocgd/at91bootstrap-3.5.2-mtocgd.patch
deleted file mode 100644
index 3a5075e..0000000
--- a/multitech/recipes/at91bootstrap/at91bootstrap-3.5.3/mtocgd/at91bootstrap-3.5.2-mtocgd.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-Index: at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig
-===================================================================
---- at91bootstrap-3.5.2.orig/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig	2013-01-30 04:01:20.000000000 -0600
-+++ at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5eknf_uboot_defconfig	2013-02-08 16:44:22.759998432 -0600
-@@ -42,7 +42,8 @@
- ALLOW_PIO3=y
- CONFIG_HAS_PIO3=y
- CPU_HAS_PMECC=y
--CONFIG_LOAD_ONE_WIRE=y
-+# MTS: don't load one wire
-+# CONFIG_LOAD_ONE_WIRE is not set
- 
- #
- # Memory selection
-@@ -102,4 +103,5 @@
- # CONFIG_USER_HW_INIT is not set
- CONFIG_THUMB=y
- CONFIG_SCLK=y
--CONFIG_DISABLE_WATCHDOG=y
-+# MTS: don't disable watchdog
-+# CONFIG_DISABLE_WATCHDOG is not set
-Index: at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5ek.h
-===================================================================
---- at91bootstrap-3.5.2.orig/board/at91sam9x5ek/at91sam9x5ek.h	2013-01-30 04:01:20.000000000 -0600
-+++ at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5ek.h	2013-02-08 16:44:22.759998432 -0600
-@@ -95,7 +95,8 @@
- #define CONFIG_SYS_NAND_CLE_PIN		AT91C_PIN_PD(3)
- #define CONFIG_SYS_NAND_ENABLE_PIN      AT91C_PIN_PD(4)
- 
--#define	PMECC_ERROR_CORR_BITS		2
-+/* MTS: use 4-bit PMECC */
-+#define	PMECC_ERROR_CORR_BITS		4
- #define	PMECC_SECTOR_SIZE		512
- 
- #define CONFIG_LOOKUP_TABLE_ALPHA_OFFSET	0xC000
-Index: at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5ek.c
-===================================================================
---- at91bootstrap-3.5.2.orig/board/at91sam9x5ek/at91sam9x5ek.c	2013-01-30 04:01:20.000000000 -0600
-+++ at91bootstrap-3.5.2/board/at91sam9x5ek/at91sam9x5ek.c	2013-02-08 16:46:23.260086935 -0600
-@@ -268,10 +268,8 @@
- 
- 	reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA);
- 	reg |= AT91C_EBI_CS3A_SM;
--	if ((get_cm_rev() == 'A') && (get_cm_vendor() == VENDOR_EMBEST))
--		reg &= ~AT91C_EBI_NFD0_ON_D16;
--	else
--		reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16);
-+	/* MTR */
-+	reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16);
- 
- 	reg &= ~AT91C_EBI_DRV;
- 	writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA);
-@@ -300,10 +298,7 @@
- 		| AT91_SMC_TDF_(1)),
- 		AT91C_BASE_SMC + SMC_CTRL3);
- 
--	/* Configure the PIO controller */
--	if ((get_cm_rev() == 'A') && (get_cm_vendor() == VENDOR_EMBEST))
--		pio_configure(nand_pins_lo);
--	else
-+	/* MTR2 */
- 		pio_configure(nand_pins_hi);
- 
- 	writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC));