From 223246228c5224a91147a98dc394ea60efab81ef Mon Sep 17 00:00:00 2001
From: James Maki <jmaki@multitech.com>
Date: Wed, 28 Apr 2010 09:57:12 -0500
Subject: optional at command init

---
 README | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 91 insertions(+), 1 deletion(-)

(limited to 'README')

diff --git a/README b/README
index a31a6cb..f5e88a0 100644
--- a/README
+++ b/README
@@ -1,3 +1,93 @@
-SMS command line utilities for Linux
+Description:
+
+SMS command line utilities for Linux.
+
+Introduction:
 
 Command line utility to send, list, read, delete SMS messages from your mobile device.
+
+Motivation:
+
+Send text messages from the command line using vi.
+
+Setup:
+
+Copy src/sms.config.example to your home directory and edit it to fit.
+
+  cp src/sms.config.example ${HOME}/.smsconfig
+  vi ${HOME}/.smsconfig
+  ...
+
+Options found in your local .smsconfig override the compile time defaults. Command
+line options override options in .smsconfig.
+
+
+Sending messages:
+
+By default or when interactive mode is enabled and an editor is configured, sending
+an SMS will pop you into your editor to create the message. The length of the
+message will be truncated without warning to the maximum message length in the
+selected alphabet. Seven-bit mode can contain up to 160 characters. Eight-bit mode
+can contain up to 140 bytes.
+
+To send an SMS to 1234567890 issue the command:
+
+sms send 1234567890
+
+If all goes well there should be no errors or warning messages
+printed to stderr and the program should exit with 0.
+
+The validity period is not configurable and will be set to 2 days out from
+the time of send.
+
+If the address specified contains any non-digit and non-command characters, the
+selected phonebook will be searched for a match. In interactive mode a substring
+search is performed and the user is prompted with any matches found. In
+non-interactive mode an exact match must be found.
+
+Listing messages:
+
+You can read the messages stored in the selected storage areas by issuing the
+command:
+
+sms list all
+
+If you only wanted to list unread messages then issue the command:
+
+sms list unread
+
+The output is in YAML which is both readable and easily parsed. Other output formats
+such as XML could be added as well.
+
+Reading a messages:
+
+To read the message at index 1 issue the command:
+
+sms read 1
+
+After the read command completes the message at index 1 will be
+marked as read.
+
+
+Deleting messages:
+
+You can delete a message by its status {unread, read, sent, unsent}, by index, or
+all messages.
+
+To delete a message at index 1 issue the command:
+
+sms delete index 1
+
+To delete all messages issue the command:
+
+sms delete all
+
+To delete only read messages issue:
+
+sms delete read
+
+
+Future:
+
+Add TCP client/server mode support.
+
-- 
cgit v1.2.3