summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFiles
2022-01-24remove out of sync message, not applicable4.0.17Jason Reiss1
2022-01-24fix syntax error4.0.16Jason Reiss1
2022-01-24wait 32s before scheduling beacons4.0.15Jason Reiss1
2021-12-10Check old and new spidev paths for mts-io reset.4.0.14Jason Reiss1
Add reset on start, add lgw_stop before exits.
2021-12-07Add restart interval configJason Reiss1
2021-11-29Skip err accumulation if calculated error is 0.0 during calibration4.0.13Jason Reiss1
2021-06-21fix difftime call args4.0.12Jason Reiss1
2021-06-21Change the auto restart to use process clock time rather than sx1301 counter4.0.11Jason Reiss1
Use exit instead of a clean shutdown, race condition between threads may have been causing the process to hang
2021-04-15increment size with each temp table4.0.10Jason Reiss1
2021-04-15increment size with each temp table4.0.9Jason Reiss1
2021-04-14check size of temp tables loadedJason Reiss1
2021-04-08load lut into lgw when temp comp is enabled4.0.8Jason Reiss1
2021-04-01Check if temp is below lowest table.4.0.7Jason Reiss1
2021-03-04Add periodic restart. PKF will run for about 800 min before stopping and ↵4.0.6Jason Reiss1
expecting the process be restarted by angel or monit. Gateways have been seen to stop transmitting if left running for several consecutive days, restarting the process restored functionality
2021-02-19reduce LUT temperature file size4.0.5Jason Reiss1
2021-01-25Load temperature adjusted LUT values and tables when temp_lut.json ↵4.0.3Jason Reiss3
configuraion is detected.
2020-12-28Merge branch 'add-new-gpsd' into 'master' 4.0.24.0.1-mts-12Harsh Sharma1
Unused variable cleanup See merge request !3
2020-12-28Unused variable cleanupHarsh Sharma1
2020-12-28Merge branch 'add-new-gpsd' into 'master' Harsh Sharma1
Added changes for gps thread to work with the gpsd library See merge request !2
2020-12-22Added changes for gps thread to work with the gpsd libraryHarsh Sharma1
2020-12-07Apply max power limit to beacon power, reduced by antenna gain4.0.1-mts-11Jason Reiss1
2020-12-04Add temperature compensation matrix supportJason Reiss2
Add example temperature compensation to global_conf.json
2020-11-18Add tx power limit in global_conf.json4.0.1-mts-10Jason Reiss1
2020-11-12Remove periodic LBT restart, LBT issue was found in FPGA code and fixed in v354.0.1-mts-9Jason Reiss1
2020-09-14Update lora_pkt_fwd.c - AU915 and US915 beacon format is was different ↵4.0.1-mts-8Jason Reiss1
because of specification errors, see 1.0.3rA errata
2020-05-04Update lora_pkt_fwd.c : disable duty-cycle by default4.0.1-mts-7Jason Reiss1
2020-04-09add time-on-air check before transmitting4.0.1-mts-5Jason Reiss1
2020-04-09Merge branch 'master' of ↵Jason Reiss1
gitlab.multitech.net:lora_enterprise/packet_forwarder_mtac_full
2020-04-09add time-on-air check before transmittingJason Reiss2
2020-04-06Update lora_pkt_fwd.c 4.0.1-mts-4Jason Reiss1
-- cancel validation thread on exit
2020-04-06Update lora_pkt_fwd.c Jason Reiss1
-- start thread_valid and add check for gps_enabled to update time-on-air allowed when gps is off
2020-03-31add duty-cycle limit optionsJason Reiss1
2020-03-20Add periodic LBT restart and lgw sx1301 page monitorJason Reiss1
2020-03-20Merge branch 'revert-b41e94f6' into 'master' Jason Reiss1
Revert "Add LBT periodic restart and lgw_page monitor" See merge request !1
2020-03-20Revert "Add LBT periodic restart and lgw_page monitor"Jason Reiss1
This reverts commit b41e94f6850bc6e5b46e324d6bf9abff2cbc3f1e
2020-03-20Update lora_pkt_fwd.cJason Reiss1
2020-03-20Add lbt_enabled flagJason Reiss1
2020-03-20Add LBT periodic restart and lgw_page monitorJason Reiss1
2019-10-29Changed max tx power to not be limited to 324.0.1-mts-3Harsh Sharma1
2019-10-29Added support for setting max tx power if the FPGA supports itHarsh Sharma1
2019-10-03Changed version string to based on just git describeHarsh Sharma1
2019-10-03Added rety with pin reset when concentrator does not start and changed build ↵Harsh Sharma2
version to be based on git describe and commit
2019-09-25MTAC cards with fpga v28 are not allowed to run the spectral scan thread. ↵Harsh Sharma2
GP-281: Eui was not casted properly in spectral scan thread
2019-09-20Remove xtal correction requirement for beacons check that sheduling times ↵Jason Reiss1
look correct
2019-09-20Beacon: reset last beacon if time change is detected.Jason Reiss1
2019-09-19Add gpsd patchJason Reiss2
2019-09-19Add patches for best packet filter, beacon fix for AU, and log rotateJason Reiss2
2019-09-18Update VERSIONJason Reiss1
2019-09-16Reduced spectral scan thread's pollingHarsh Sharma1
2019-09-11Changed lgw receive to try until reset counter before exitingHarsh Sharma1