A Board Support Package (BSP) is a collection of information that defines how to support a particular hardware device, set of devices, or hardware platform. The BSP includes information about the hardware features present on the device and kernel configuration information along with any additional hardware drivers required. The BSP also lists any additional software components required in addition to a generic Linux software stack for both essential and optional platform features. This section (or document if you are reading the BSP Developer's Guide) defines a structure for these components so that BSPs follow a commonly understood layout. Providing a common form allows end-users to understand and become familiar with the layout. A common form also encourages standardization of software support of hardware. The proposed format does have elements that are specific to the Poky and OpenEmbedded build systems. It is intended that this information can be used by other systems besides Poky and OpenEmbedded and that it will be simple to extract information and convert it to other formats if required. Poky, through its standard layers mechanism, can directly accept the format described as a layer. The BSP captures all the hardware-specific details in one place in a standard format, which is useful for any person wishing to use the hardware platform regardless of the build system they are using. The BSP specification does not include a build system or other tools - it is concerned with the hardware-specific components only. At the end distribution point you can ship the BSP combined with a build system and other tools. However, it is important to maintain the distinction that these are separate components that happen to be combined in certain end products.

The BSP consists of a file structure inside a base directory, which uses the following naming convention: meta-<bsp_name> "bsp_name" is a placeholder for the machine or platform name. Here are some example base directory names: meta-emenlow meta-intel_n450 meta-beagleboard Below is the common form for the file structure inside a base directory. While you can use this basic form for the standard, realize that the actual structures for specific BSPs could differ. meta-<bsp_name>/ meta-<bsp_name>/<bsp_license_file> meta-<bsp_name>/README meta-<bsp_name>/binary/<bootable_images> meta-<bsp_name>/conf/layer.conf meta-<bsp_name>/conf/machine/*.conf meta-<bsp_name>/recipes-bsp/* meta-<bsp_name>/recipes-graphics/* meta-<bsp_name>/recipes-kernel/linux/linux-wrs_git.bbappend Below is an example of the crownbay BSP: meta-crownbay/COPYING.MIT meta-crownbay/README meta-crownbay/binary/.gitignore meta-crownbay/conf/layer.conf meta-crownbay/conf/machine/crownbay.conf meta-crownbay/recipes-bsp/formfactor/formfactor/crownbay/machconfig meta-crownbay/recipes-bsp/formfactor/formfactor_0.0.bbappend meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay/xcorg.conf meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd-bin/.gitignore meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd-bin_1.7.99.2.bb meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd/crosscompile.patch meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd/fix_open_max_preprocessor_error.patch meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd/macro_tweak.patch meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd/nodolt.patch meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd_1.7.99.2.bb meta-crownbay/recipes-kernel/linux/linux-wrs_git.bbappend The following sections describe each part of the proposed BSP format.

meta-<bsp_name>/<bsp_license_file> These optional files satisfy licensing requirements for the BSP. The type or types of files here can vary depending on the licensing requirements. For example, in the crownbay BSP all licensing requirements are handled with the COPYING.MIT file. Licensing files can be MIT, BSD, GPLv*, and so forth. These files are recommended for the BSP but are optional and totally up to the BSP developer.

meta-<bsp_name>/README This file provides information on how to boot the live images that are optionally included in the /binary directory. The README file also provides special information needed for building the image. Technically speaking a README is optional but it is highly recommended that every BSP has one.

meta-<bsp_name>/binary/<bootable_images> This optional area contains useful pre-built kernels and userspace filesystem images appropriate to the target system. This directory contains the Application Development Toolkit (ADT) and minimal live images when the BSP is has been "tar-balled" and placed on the Yocto Project website. You can use these kernels and images to get a system running and quickly get started on development tasks. The exact types of binaries present are highly hardware-dependent. However, a README file should be present in the BSP file structure that explains how to use the kernels and images with the target hardware. If pre-built binaries are present, source code to meet licensing requirements must also be provided in some form.

meta-<bsp_name>/conf/layer.conf This file identifies the structure as a Poky layer, identifies the contents of the layer, and contains information about how Poky should use it. Generally, a standard boilerplate file such as the following works: # We have a conf directory, add to BBPATH BBPATH := "${BBPATH}:${LAYERDIR}" # We have a recipes directory containing .bb and .bbappend files, add to BBFILES BBFILES := "${BBFILES} ${LAYERDIR}/recipes/*/*.bb \ ${LAYERDIR}/recipes/*/*.bbappend" BBFILE_COLLECTIONS += "bsp" BBFILE_PATTERN_bsp := "^${LAYERDIR}/" BBFILE_PRIORITY_bsp = "5" This file simply makes BitBake aware of the recipes and configuration directories. This file must exist so that Poky can recognize the BSP.

meta-<bsp_name>/conf/machine/*.conf The machine files bind together all the information contained elsewhere in the BSP into a format that Poky can understand. If the BSP supports multiple machines, multiple machine configuration files can be present. These filenames correspond to the values to which users have set the MACHINE variable. These files define things such as the kernel package to use (PREFERRED_PROVIDER of virtual/kernel), the hardware drivers to include in different types of images, any special software components that are needed, any bootloader information, and also any special image format requirements. At least one machine file is required for a BSP layer. However, you can supply more than one file. This directory could also contain shared hardware "tuning" definitions that are commonly used to pass specific optimization flags to the compiler. An example is tune-atom.inc: BASE_PACKAGE_ARCH = "core2" TARGET_CC_ARCH = "-m32 -march=core2 -msse3 -mtune=generic -mfpmath=sse" This example defines a new package architecture called "core2" and uses the specified optimization flags, which are carefully chosen to give best performance on atom processors. The tune file would be included by the machine definition and can be contained in the BSP or referenced from one of the standard core set of files included with Poky itself. Both the base package architecuture file and the tune file are optional for a Poky BSP layer.

meta-<bsp_name>/recipes-bsp/* This directory contains miscellaneous recipe files for the BSP. Most notably would be the formactor files. For example, in the crownbay BSP there is a machconfig file and a formfactor_0.0.bbappend file: meta-crownbay/recipes-bsp/formfactor/formfactor/crownbay/machconfig meta-crownbay/recipes-bsp/formfactor/formfactor_0.0.bbappend

meta-<bsp_name>/recipes-graphics/* This directory contains graphics recipes for the BSP. All files that are needed for the BSP to support a display are kept here. For example, in the crownbay BSP several display support files exist: meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay/xcorg.conf meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd-bin/.gitignore meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd-bin_1.7.99.2.bb meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd/crosscompile.patch meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd/fix_open_max_preprocessor_error.patch meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd/macro_tweak.patch meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd/nodolt.patch meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-emgd_1.7.99.2.bb

These files make up the definition of a kernel to use with this hardware. In this case, it is a complete self-contained kernel with its own configuration and patches. However, kernels can be shared between many machines as well. Following is an example: meta-Emenlow/recipes-kernel/linux/linux-bsp_2.6.50.bb This example file is the core kernel recipe that details from where to get the kernel source. All standard source code locations are supported. Consequently, the source could be a release tarball, a git repository, or source included in the directory within the BSP itself. The file then contains information about what patches to apply and how to configure and build them. Because the file can reuse the main Poky kernel build class, the definitions here can remain very simple. linux-bsp-2.6.50/*.patch The above example file contains patches you can apply against the base kernel, from wherever they may have been obtained. meta-Emenlow/recipes-kernel/linux/linux-bsp-2.6.50/defconfig-bsp Finally, this last example file contains kernel configuration information. Examples of kernel recipes are available in Poky itself, and thus, make these files optional. However, it would be unusual not to have a kernel configuration.

This section describes other pieces of software that the hardware might need for best operation. Examples show some of the things you could encounter. The examples are standard .bb file recipes in the usual Poky format. You can include the source directly by referring to it in the source control system or the released tarballs of external software projects. You only need to provide these types of files if the platform requires them. The following file is a bootloader recipe that can be used to generate a new bootloader binary. Sometimes these files are included in the final image format and are needed to re-flash hardware. meta-Emenlow/recipes-kernel/bootloader/bootloader_0.1.bb These next two files are examples of a hardware driver and a hardware daemon that might need to be included in images to make the hardware useful. Although the example uses "modem" there may be other components needed, such as firmware. meta-Emenlow/recipes-Emenlow/modem/modem-driver_0.1.bb meta-Emenlow/recipes-Emenlow/modem/modem-daemon_0.1.bb Sometimes the device needs an image in a very specific format so that the update mechanism can accept and re-flash it. Recipes to build the tools needed to do this can be included with the BSP. Following is an example. meta-Emenlow/recipes-Emenlow/image-creator/image-creator-native_0.1.bb

Suppose you have a recipe such as "pointercal" that requires machine-specific information. At the same time, you have your new BSP code nicely partitioned into a layer through which you would also like to specify any machine-specific information associated with your new machine. Before the .bbappend extension was introduced, you would have to copy the whole pointercal recipe and files into your layer and then add the single file for your machine. With the .bbappend extension, however, your work becomes much easier. This extension allows you to easily merge BSP-specific information with the original recipe. Whenever BitBake finds any .bbappend files BitBake will include them after it loads the associated .bb file but before any finalize or anonymous methods are run. This allows the BSP layer to do whatever it might want to do to customize the original recipe. If your recipe needs to reference extra files it can use the FILESEXTRAPATH variable to specify their location. The example below shows extra files contained in a folder called ${PN} (the package name). FILESEXTRAPATHS := "${THISDIR}/${PN}" This technique allows the BSP to add machine-specific configuration files to the layer directory, which will be picked up by BitBake. For an example see meta-emenlow/packages/formfactor.

This location can contain precompiled representations of the source code contained elsewhere in the BSP layer. Assuming a compatible configuration is used, Poky can process and use these optional pre-compiled representations to provide much faster build times.

This section describes how click-through licensing is expected to work. Currently, this functionality is not yet implemented. In some cases, a BSP contains separately licensed IP (Intellectual Property) for a component that imposes upon the user a requirement to accept the terms of a 'click-through' license. Once the license is accepted the Poky build system can then build and include the corresponding component in the final BSP image. Some affected components might be essential to the normal functioning of the system and have no 'free' replacement (i.e. the resulting system would be non-functional without them). On the other hand, other components might be simply 'good-to-have' or purely elective, or if essential nonetheless have a 'free' (possibly less-capable) version that could be used as a in the BSP recipe. For cases where you can substitute something and still maintain functionality, the Poky website will make available a 'de-featured' BSP completely free of the encumbered IP. In that case you can use the substitution directly and without any further licensing requirements. If present, this fully 'de-featured' BSP will be named meta-<bsp_name> (i.e. the normal default naming convention). If available, this is the simplest the most preferred option. This, of course, assumes the resulting functionality meets requirements. If however, a non-encumbered version is unavailable or the 'free' version would provide unsuitable functionality or quality, an encumbered version can be used. Encumbered versions of a BSP are given names of the form meta-<bsp_name>-nonfree. Several methods exist within the Poky build system to satisfy the licensing requirements for an encumbered BSP. The following list describes them in preferential order: Get a license key (or keys) for the encumbered BSP by visiting https://pokylinux.org/bsp-keys.html and give the name of the BSP and your e-mail address in the web form. [screenshot of dialog box] After agreeing to any applicable license terms, the BSP key(s) will be immediately sent to the address you gave and you can use them by specifying BSPKEY_<keydomain> environment variables when building the image: $ BSPKEY_<keydomain>=<key> bitbake poky-image-sato These steps allow the encumbered image to be built with no change at all to the normal build process. Equivalently and probably more conveniently, a line for each key can instead be put into the user's local.conf file. The <keydomain> component of the BSPKEY_<keydomain> is required because there might be multiple licenses in effect for a given BSP. In such cases, a given <keydomain> corresponds to a particular license. In order for an encumbered BSP that encompasses multiple key domains to be built successfully, a <keydomain> entry for each applicable license must be present in local.conf or supplied on the command-line. Do nothing - build as you normally would. When a license is needed the build will stop and prompt you with instructions. Follow the license prompts that originate from the encumbered BSP. These prompts usually take the form of instructions needed to manually fetch the encumbered package(s) and md5 sums into the required directory (e.g. the poky/build/downloads) Once the manual package fetch has been completed, restart the build to continue where it left off. During the build the prompt will not appear again since you have satisfied the requirement. Get a full-featured BSP recipe rather than a key, by visiting https://pokylinux.org/bsps.html. Accepting the license agreement(s) presented will subsequently allow you to download a tarball containing a full-featured BSP that is legally cleared for your use by the just-given license agreement(s). This method will also allow the encumbered image to be built with no change at all to the normal build process. Note that the third method is also the only option available when downloading pre-compiled images generated from non-free BSPs. Those images are likewise available at https://pokylinux.org/bsps.html.