From 0f83cb8ca629fbf1af448781f28912bbc75e0d80 Mon Sep 17 00:00:00 2001 From: Constantin Musca Date: Thu, 24 Jan 2013 18:07:24 +0200 Subject: wpa-supplicant: upgrade to 2.0 - as of February 11, 2012, the project has chosen to use only the BSD license option for future distribution - wpa-supplicant-1.0 dir was not version specific, as such it is generic now Signed-off-by: Constantin Musca Signed-off-by: Cristian Iorga Signed-off-by: Richard Purdie --- .../wpa-supplicant/wpa-supplicant-1.0.inc | 84 --- .../wpa-supplicant-1.0/99_wpa_supplicant | 1 - .../wpa-supplicant-1.0/defconfig-gnutls | 409 ------------ .../wpa-supplicant-1.0/wpa-supplicant.sh | 85 --- .../wpa-supplicant-1.0/wpa_supplicant.conf | 690 --------------------- .../wpa-supplicant-1.0/wpa_supplicant.conf-sane | 7 - .../wpa-supplicant/wpa-supplicant-2.0.inc | 84 +++ .../wpa-supplicant/99_wpa_supplicant | 1 + .../wpa-supplicant/wpa-supplicant/defconfig-gnutls | 409 ++++++++++++ .../wpa-supplicant/wpa-supplicant.sh | 85 +++ .../wpa-supplicant/wpa_supplicant.conf | 690 +++++++++++++++++++++ .../wpa-supplicant/wpa_supplicant.conf-sane | 7 + .../wpa-supplicant/wpa-supplicant_1.0.bb | 6 - .../wpa-supplicant/wpa-supplicant_2.0.bb | 6 + 14 files changed, 1282 insertions(+), 1282 deletions(-) delete mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0.inc delete mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/99_wpa_supplicant delete mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/defconfig-gnutls delete mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa-supplicant.sh delete mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa_supplicant.conf delete mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa_supplicant.conf-sane create mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-2.0.inc create mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant create mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig-gnutls create mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh create mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf create mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf-sane delete mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_1.0.bb create mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.0.bb (limited to 'meta/recipes-connectivity/wpa-supplicant') diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0.inc b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0.inc deleted file mode 100644 index 0645193803..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0.inc +++ /dev/null @@ -1,84 +0,0 @@ -DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)." -HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/" -BUGTRACKER = "http://hostap.epitest.fi/bugz/" -SECTION = "network" -LICENSE = "GPLv2 | BSD" -LIC_FILES_CHKSUM = "file://../COPYING;md5=c54ce9345727175ff66d17b67ff51f58 \ - file://../README;md5=9bee93996fecdb70f807baceb29d84b9 \ - file://wpa_supplicant.c;beginline=1;endline=17;md5=372fb65dc23b228aec4e40e64de3e467" -DEPENDS = "gnutls dbus libnl" -RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli" - -SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \ - file://defconfig-gnutls \ - file://wpa-supplicant.sh \ - file://wpa_supplicant.conf \ - file://wpa_supplicant.conf-sane \ - file://99_wpa_supplicant" - -S = "${WORKDIR}/wpa_supplicant-${PV}/wpa_supplicant" - -PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli " -FILES_wpa-supplicant-passphrase = "${bindir}/wpa_passphrase" -FILES_wpa-supplicant-cli = "${sbindir}/wpa_cli" -FILES_${PN} += "${datadir}/dbus-1/system-services/* ${systemd_unitdir}/system/*" -CONFFILES_${PN} += "${sysconfdir}/wpa_supplicant.conf" - -do_configure () { - echo "CFLAGS +=\"-I${STAGING_INCDIR}/libnl3\"" >> ${WORKDIR}/defconfig-gnutls - install -m 0755 ${WORKDIR}/defconfig-gnutls .config -} - -export EXTRA_CFLAGS = "${CFLAGS}" -export BINDIR = "${sbindir}" - -do_compile () { - unset CFLAGS CPPFLAGS CXXFLAGS - oe_runmake -} - -do_install () { - install -d ${D}${sbindir} - install -m 755 wpa_supplicant ${D}${sbindir} - install -m 755 wpa_cli ${D}${sbindir} - - install -d ${D}${bindir} - install -m 755 wpa_passphrase ${D}${bindir} - - install -d ${D}${docdir}/wpa_supplicant - install -m 644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant - - install -d ${D}${sysconfdir} - install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf - - install -d ${D}${sysconfdir}/network/if-pre-up.d/ - install -d ${D}${sysconfdir}/network/if-post-down.d/ - install -d ${D}${sysconfdir}/network/if-down.d/ - install -m 755 ${WORKDIR}/wpa-supplicant.sh ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant - cd ${D}${sysconfdir}/network/ && \ - ln -sf ../if-pre-up.d/wpa-supplicant if-post-down.d/wpa-supplicant - - install -d ${D}/${sysconfdir}/dbus-1/system.d - install -m 644 ${S}/dbus/dbus-wpa_supplicant.conf ${D}/${sysconfdir}/dbus-1/system.d - install -d ${D}/${datadir}/dbus-1/system-services - install -m 644 ${S}/dbus/*.service ${D}/${datadir}/dbus-1/system-services - - install -d ${D}/${systemd_unitdir}/system - install -m 644 ${S}/systemd/wpa_supplicant.service ${D}/${systemd_unitdir}/system - - install -d ${D}/etc/default/volatiles - install -m 0644 ${WORKDIR}/99_wpa_supplicant ${D}/etc/default/volatiles -} - -pkg_postinst_wpa-supplicant () { - # If we're offline, we don't need to do this. - if [ "x$D" != "x" ]; then - exit 0 - fi - - DBUSPID=`pidof dbus-daemon` - - if [ "x$DBUSPID" != "x" ]; then - /etc/init.d/dbus-1 reload || true - fi -} diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/99_wpa_supplicant b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/99_wpa_supplicant deleted file mode 100644 index 6ff4dd8826..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/99_wpa_supplicant +++ /dev/null @@ -1 +0,0 @@ -d root root 0700 /var/run/wpa_supplicant none diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/defconfig-gnutls b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/defconfig-gnutls deleted file mode 100644 index e041b4d36f..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/defconfig-gnutls +++ /dev/null @@ -1,409 +0,0 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -# CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - -# Driver interface for generic Linux wireless extensions -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface -CONFIG_LIBNL32=y -CONFIG_DRIVER_NL80211=y - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Include client MLME (management frame processing) for test driver -# This can be used to test MLME operations in hostapd with the test interface. -# space. -#CONFIG_CLIENT_MLME=y - -# Driver interface for wired Ethernet drivers -CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 -CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 -CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP -CONFIG_EAP_PEAP=y - -# EAP-TTLS -CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -#CONFIG_READLINE=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template -#CONFIG_ELOOP=eloop - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. -# Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -#CONFIG_TLS=openssl - -# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. -# You need CONFIG_TLS=gnutls for this to have any effect. Please note that -# even though the core GnuTLS library is released under LGPL, this extra -# library uses GPL and as such, the terms of GPL apply to the combination -# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not -# apply for distribution of the resulting binary. -#CONFIG_GNUTLS_EXTRA=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -#CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -#CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -#CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -#CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -#CONFIG_DEBUG_FILE=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, comment out these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, comment out these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz -CONFIG_TLS = gnutls -#CONFIG_GNUTLS_EXTRA=y -CONFIG_CTRL_IFACE_DBUS=y -CONFIG_CTRL_IFACE_DBUS_NEW=y diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa-supplicant.sh b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa-supplicant.sh deleted file mode 100644 index 5c9e5d33a7..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa-supplicant.sh +++ /dev/null @@ -1,85 +0,0 @@ -#!/bin/sh - - -WPA_SUP_BIN="/usr/sbin/wpa_supplicant" -WPA_SUP_PNAME="wpa_supplicant" -WPA_SUP_PIDFILE="/var/run/wpa_supplicant.$IFACE.pid" -WPA_SUP_OPTIONS="-B -P $WPA_SUP_PIDFILE -i $IFACE" - -VERBOSITY=0 - - -if [ -s "$IF_WPA_CONF" ]; then - WPA_SUP_CONF="-c $IF_WPA_CONF" -else - exit 0 -fi - -if [ ! -x "$WPA_SUP_BIN" ]; then - - if [ "$VERBOSITY" = "1" ]; then - echo "$WPA_SUP_PNAME: binaries not executable or missing from $WPA_SUP_BIN" - fi - - exit 1 -fi - -if [ "$MODE" = "start" ] ; then - # driver type of interface, defaults to wext when undefined - if [ -s "/etc/wpa_supplicant/driver.$IFACE" ]; then - IF_WPA_DRIVER=$(cat "/etc/wpa_supplicant/driver.$IFACE") - elif [ -z "$IF_WPA_DRIVER" ]; then - - if [ "$VERBOSITY" = "1" ]; then - echo "$WPA_SUP_PNAME: wpa-driver not provided, using \"wext\"" - fi - - IF_WPA_DRIVER="wext" - fi - - # if we have passed the criteria, start wpa_supplicant - if [ -n "$WPA_SUP_CONF" ]; then - - if [ "$VERBOSITY" = "1" ]; then - echo "$WPA_SUP_PNAME: $WPA_SUP_BIN $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER" - fi - - start-stop-daemon --start --quiet \ - --name $WPA_SUP_PNAME --startas $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE \ - -- $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER - fi - - # if the interface socket exists, then wpa_supplicant was invoked successfully - if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then - - if [ "$VERBOSITY" = "1" ]; then - echo "$WPA_SUP_PNAME: ctrl_interface socket located at $WPA_COMMON_CTRL_IFACE/$IFACE" - fi - - exit 0 - - fi - -elif [ "$MODE" = "stop" ]; then - - if [ -f "$WPA_SUP_PIDFILE" ]; then - - if [ "$VERBOSITY" = "1" ]; then - echo "$WPA_SUP_PNAME: terminating $WPA_SUP_PNAME daemon" - fi - - start-stop-daemon --stop --quiet \ - --name $WPA_SUP_PNAME --pidfile $WPA_SUP_PIDFILE - - if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then - rm -f $WPA_COMMON_CTRL_IFACE/$IFACE - fi - - if [ -f "$WPA_SUP_PIDFILE" ]; then - rm -f $WPA_SUP_PIDFILE - fi - fi - -fi - -exit 0 diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa_supplicant.conf b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa_supplicant.conf deleted file mode 100644 index 68258f5ee2..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa_supplicant.conf +++ /dev/null @@ -1,690 +0,0 @@ -##### Example wpa_supplicant configuration file ############################### -# -# This file describes configuration file format and lists all available option. -# Please also take a look at simpler configuration examples in 'examples' -# subdirectory. -# -# Empty lines and lines starting with # are ignored - -# NOTE! This file may contain password information and should probably be made -# readable only by root user on multiuser systems. - -# Note: All file paths in this configuration file should use full (absolute, -# not relative to working directory) path in order to allow working directory -# to be changed. This can happen if wpa_supplicant is run in the background. - -# Whether to allow wpa_supplicant to update (overwrite) configuration -# -# This option can be used to allow wpa_supplicant to overwrite configuration -# file whenever configuration is changed (e.g., new network block is added with -# wpa_cli or wpa_gui, or a password is changed). This is required for -# wpa_cli/wpa_gui to be able to store the configuration changes permanently. -# Please note that overwriting configuration file will remove the comments from -# it. -#update_config=1 - -# global configuration (shared by all network blocks) -# -# Parameters for the control interface. If this is specified, wpa_supplicant -# will open a control interface that is available for external programs to -# manage wpa_supplicant. The meaning of this string depends on which control -# interface mechanism is used. For all cases, the existence of this parameter -# in configuration is used to determine whether the control interface is -# enabled. -# -# For UNIX domain sockets (default on Linux and BSD): This is a directory that -# will be created for UNIX domain sockets for listening to requests from -# external programs (CLI/GUI, etc.) for status information and configuration. -# The socket file will be named based on the interface name, so multiple -# wpa_supplicant processes can be run at the same time if more than one -# interface is used. -# /var/run/wpa_supplicant is the recommended directory for sockets and by -# default, wpa_cli will use it when trying to connect with wpa_supplicant. -# -# Access control for the control interface can be configured by setting the -# directory to allow only members of a group to use sockets. This way, it is -# possible to run wpa_supplicant as root (since it needs to change network -# configuration and open raw sockets) and still allow GUI/CLI components to be -# run as non-root users. However, since the control interface can be used to -# change the network configuration, this access needs to be protected in many -# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you -# want to allow non-root users to use the control interface, add a new group -# and change this value to match with that group. Add users that should have -# control interface access to this group. If this variable is commented out or -# not included in the configuration file, group will not be changed from the -# value it got by default when the directory or socket was created. -# -# When configuring both the directory and group, use following format: -# DIR=/var/run/wpa_supplicant GROUP=wheel -# DIR=/var/run/wpa_supplicant GROUP=0 -# (group can be either group name or gid) -# -# For UDP connections (default on Windows): The value will be ignored. This -# variable is just used to select that the control interface is to be created. -# The value can be set to, e.g., udp (ctrl_interface=udp) -# -# For Windows Named Pipe: This value can be used to set the security descriptor -# for controlling access to the control interface. Security descriptor can be -# set using Security Descriptor String Format (see http://msdn.microsoft.com/ -# library/default.asp?url=/library/en-us/secauthz/security/ -# security_descriptor_string_format.asp). The descriptor string needs to be -# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty -# DACL (which will reject all connections). See README-Windows.txt for more -# information about SDDL string format. -# -ctrl_interface=/var/run/wpa_supplicant - -# IEEE 802.1X/EAPOL version -# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines -# EAPOL version 2. However, there are many APs that do not handle the new -# version number correctly (they seem to drop the frames completely). In order -# to make wpa_supplicant interoperate with these APs, the version number is set -# to 1 by default. This configuration value can be used to set it to the new -# version (2). -eapol_version=1 - -# AP scanning/selection -# By default, wpa_supplicant requests driver to perform AP scanning and then -# uses the scan results to select a suitable AP. Another alternative is to -# allow the driver to take care of AP scanning and selection and use -# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association -# information from the driver. -# 1: wpa_supplicant initiates scanning and AP selection -# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association -# parameters (e.g., WPA IE generation); this mode can also be used with -# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with -# APs (i.e., external program needs to control association). This mode must -# also be used when using wired Ethernet drivers. -# 2: like 0, but associate with APs using security policy and SSID (but not -# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to -# enable operation with hidden SSIDs and optimized roaming; in this mode, -# the network blocks in the configuration file are tried one by one until -# the driver reports successful association; each network block should have -# explicit security policy (i.e., only one option in the lists) for -# key_mgmt, pairwise, group, proto variables -ap_scan=1 - -# EAP fast re-authentication -# By default, fast re-authentication is enabled for all EAP methods that -# support it. This variable can be used to disable fast re-authentication. -# Normally, there is no need to disable this. -fast_reauth=1 - -# OpenSSL Engine support -# These options can be used to load OpenSSL engines. -# The two engines that are supported currently are shown below: -# They are both from the opensc project (http://www.opensc.org/) -# By default no engines are loaded. -# make the opensc engine available -#opensc_engine_path=/usr/lib/opensc/engine_opensc.so -# make the pkcs11 engine available -#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so -# configure the path to the pkcs11 module required by the pkcs11 engine -#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so - -# Dynamic EAP methods -# If EAP methods were built dynamically as shared object files, they need to be -# loaded here before being used in the network blocks. By default, EAP methods -# are included statically in the build, so these lines are not needed -#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so -#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so - -# Driver interface parameters -# This field can be used to configure arbitrary driver interace parameters. The -# format is specific to the selected driver interface. This field is not used -# in most cases. -#driver_param="field=value" - -# Maximum lifetime for PMKSA in seconds; default 43200 -#dot11RSNAConfigPMKLifetime=43200 -# Threshold for reauthentication (percentage of PMK lifetime); default 70 -#dot11RSNAConfigPMKReauthThreshold=70 -# Timeout for security association negotiation in seconds; default 60 -#dot11RSNAConfigSATimeout=60 - -# network block -# -# Each network (usually AP's sharing the same SSID) is configured as a separate -# block in this configuration file. The network blocks are in preference order -# (the first match is used). -# -# network block fields: -# -# disabled: -# 0 = this network can be used (default) -# 1 = this network block is disabled (can be enabled through ctrl_iface, -# e.g., with wpa_cli or wpa_gui) -# -# id_str: Network identifier string for external scripts. This value is passed -# to external action script through wpa_cli as WPA_ID_STR environment -# variable to make it easier to do network specific configuration. -# -# ssid: SSID (mandatory); either as an ASCII string with double quotation or -# as hex string; network name -# -# scan_ssid: -# 0 = do not scan this SSID with specific Probe Request frames (default) -# 1 = scan with SSID-specific Probe Request frames (this can be used to -# find APs that do not accept broadcast SSID or use multiple SSIDs; -# this will add latency to scanning, so enable this only when needed) -# -# bssid: BSSID (optional); if set, this network block is used only when -# associating with the AP using the configured BSSID -# -# priority: priority group (integer) -# By default, all networks will get same priority group (0). If some of the -# networks are more desirable, this field can be used to change the order in -# which wpa_supplicant goes through the networks when selecting a BSS. The -# priority groups will be iterated in decreasing priority (i.e., the larger the -# priority value, the sooner the network is matched against the scan results). -# Within each priority group, networks will be selected based on security -# policy, signal strength, etc. -# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not -# using this priority to select the order for scanning. Instead, they try the -# networks in the order that used in the configuration file. -# -# mode: IEEE 802.11 operation mode -# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default) -# 1 = IBSS (ad-hoc, peer-to-peer) -# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) -# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has -# to be set to 2 for IBSS. WPA-None requires following network block options: -# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not -# both), and psk must also be set. -# -# proto: list of accepted protocols -# WPA = WPA/IEEE 802.11i/D3.0 -# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN) -# If not set, this defaults to: WPA RSN -# -# key_mgmt: list of accepted authenticated key management protocols -# WPA-PSK = WPA pre-shared key (this requires 'psk' field) -# WPA-EAP = WPA using EAP authentication (this can use an external -# program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication -# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically -# generated WEP keys -# NONE = WPA is not used; plaintext or static WEP could be used -# If not set, this defaults to: WPA-PSK WPA-EAP -# -# auth_alg: list of allowed IEEE 802.11 authentication algorithms -# OPEN = Open System authentication (required for WPA/WPA2) -# SHARED = Shared Key authentication (requires static WEP keys) -# LEAP = LEAP/Network EAP (only used with LEAP) -# If not set, automatic selection is used (Open System with LEAP enabled if -# LEAP is allowed as one of the EAP methods). -# -# pairwise: list of accepted pairwise (unicast) ciphers for WPA -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# NONE = Use only Group Keys (deprecated, should not be included if APs support -# pairwise keys) -# If not set, this defaults to: CCMP TKIP -# -# group: list of accepted group (broadcast/multicast) ciphers for WPA -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key -# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11] -# If not set, this defaults to: CCMP TKIP WEP104 WEP40 -# -# psk: WPA preshared key; 256-bit pre-shared key -# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., -# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be -# generated using the passphrase and SSID). ASCII passphrase must be between -# 8 and 63 characters (inclusive). -# This field is not needed, if WPA-EAP is used. -# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys -# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant -# startup and reconfiguration time can be optimized by generating the PSK only -# only when the passphrase or SSID has actually changed. -# -# eapol_flags: IEEE 802.1X/EAPOL options (bit field) -# Dynamic WEP key required for non-WPA mode -# bit0 (1): require dynamically generated unicast WEP key -# bit1 (2): require dynamically generated broadcast WEP key -# (3 = require both keys; default) -# Note: When using wired authentication, eapol_flags must be set to 0 for the -# authentication to be completed successfully. -# -# proactive_key_caching: -# Enable/disable opportunistic PMKSA caching for WPA2. -# 0 = disabled (default) -# 1 = enabled -# -# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or -# hex without quotation, e.g., 0102030405) -# wep_tx_keyidx: Default WEP key index (TX) (0..3) -# -# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is -# allowed. This is only used with RSN/WPA2. -# 0 = disabled (default) -# 1 = enabled -#peerkey=1 -# -# Following fields are only used with internal EAP implementation. -# eap: space-separated list of accepted EAP methods -# MD5 = EAP-MD5 (unsecure and does not generate keying material -> -# cannot be used with WPA; to be used as a Phase 2 method -# with EAP-PEAP or EAP-TTLS) -# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# OTP = EAP-OTP (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# GTC = EAP-GTC (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# TLS = EAP-TLS (client and server certificate) -# PEAP = EAP-PEAP (with tunnelled EAP authentication) -# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 -# authentication) -# If not set, all compiled in methods are allowed. -# -# identity: Identity string for EAP -# anonymous_identity: Anonymous identity string for EAP (to be used as the -# unencrypted identity with EAP types that support different tunnelled -# identity, e.g., EAP-TTLS) -# password: Password string for EAP -# ca_cert: File path to CA certificate file (PEM/DER). This file can have one -# or more trusted CA certificates. If ca_cert and ca_path are not -# included, server certificate will not be verified. This is insecure and -# a trusted CA certificate should always be configured when using -# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may -# change when wpa_supplicant is run in the background. -# On Windows, trusted CA certificates can be loaded from the system -# certificate store by setting this to cert_store://, e.g., -# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". -# Note that when running wpa_supplicant as an application, the user -# certificate store (My user account) is used, whereas computer store -# (Computer account) is used when running wpasvc as a service. -# ca_path: Directory path for CA certificate files (PEM). This path may -# contain multiple CA certificates in OpenSSL format. Common use for this -# is to point to system trusted CA list which is often installed into -# directory like /etc/ssl/certs. If configured, these certificates are -# added to the list of trusted CAs. ca_cert may also be included in that -# case, but it is not required. -# client_cert: File path to client certificate file (PEM/DER) -# Full path should be used since working directory may change when -# wpa_supplicant is run in the background. -# Alternatively, a named configuration blob can be used by setting this -# to blob://. -# private_key: File path to client private key file (PEM/DER/PFX) -# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be -# commented out. Both the private key and certificate will be read from -# the PKCS#12 file in this case. Full path should be used since working -# directory may change when wpa_supplicant is run in the background. -# Windows certificate store can be used by leaving client_cert out and -# configuring private_key in one of the following formats: -# cert://substring_to_match -# hash://certificate_thumbprint_in_hex -# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4" -# Note that when running wpa_supplicant as an application, the user -# certificate store (My user account) is used, whereas computer store -# (Computer account) is used when running wpasvc as a service. -# Alternatively, a named configuration blob can be used by setting this -# to blob://. -# private_key_passwd: Password for private key file (if left out, this will be -# asked through control interface) -# dh_file: File path to DH/DSA parameters file (in PEM format) -# This is an optional configuration file for setting parameters for an -# ephemeral DH key exchange. In most cases, the default RSA -# authentication does not use this configuration. However, it is possible -# setup RSA to use ephemeral DH key exchange. In addition, ciphers with -# DSA keys always use ephemeral DH keys. This can be used to achieve -# forward secrecy. If the file is in DSA parameters format, it will be -# automatically converted into DH params. -# subject_match: Substring to be matched against the subject of the -# authentication server certificate. If this string is set, the server -# sertificate is only accepted if it contains this string in the subject. -# The subject string is in following format: -# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com -# altsubject_match: Semicolon separated string of entries to be matched against -# the alternative subject name of the authentication server certificate. -# If this string is set, the server sertificate is only accepted if it -# contains one of the entries in an alternative subject name extension. -# altSubjectName string is in following format: TYPE:VALUE -# Example: EMAIL:server@example.com -# Example: DNS:server.example.com;DNS:server2.example.com -# Following types are supported: EMAIL, DNS, URI -# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters -# (string with field-value pairs, e.g., "peapver=0" or -# "peapver=1 peaplabel=1") -# 'peapver' can be used to force which PEAP version (0 or 1) is used. -# 'peaplabel=1' can be used to force new label, "client PEAP encryption", -# to be used during key derivation when PEAPv1 or newer. Most existing -# PEAPv1 implementation seem to be using the old label, "client EAP -# encryption", and wpa_supplicant is now using that as the default value. -# Some servers, e.g., Radiator, may require peaplabel=1 configuration to -# interoperate with PEAPv1; see eap_testing.txt for more details. -# 'peap_outer_success=0' can be used to terminate PEAP authentication on -# tunneled EAP-Success. This is required with some RADIUS servers that -# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., -# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) -# include_tls_length=1 can be used to force wpa_supplicant to include -# TLS Message Length field in all TLS messages even if they are not -# fragmented. -# sim_min_num_chal=3 can be used to configure EAP-SIM to require three -# challenges (by default, it accepts 2 or 3) -# phase2: Phase2 (inner authentication with TLS tunnel) parameters -# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or -# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS) -# Following certificate/private key fields are used in inner Phase2 -# authentication when using EAP-TTLS or EAP-PEAP. -# ca_cert2: File path to CA certificate file. This file can have one or more -# trusted CA certificates. If ca_cert2 and ca_path2 are not included, -# server certificate will not be verified. This is insecure and a trusted -# CA certificate should always be configured. -# ca_path2: Directory path for CA certificate files (PEM) -# client_cert2: File path to client certificate file -# private_key2: File path to client private key file -# private_key2_passwd: Password for private key file -# dh_file2: File path to DH/DSA parameters file (in PEM format) -# subject_match2: Substring to be matched against the subject of the -# authentication server certificate. -# altsubject_match2: Substring to be matched against the alternative subject -# name of the authentication server certificate. -# -# fragment_size: Maximum EAP fragment size in bytes (default 1398). -# This value limits the fragment size for EAP methods that support -# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set -# small enough to make the EAP messages fit in MTU of the network -# interface used for EAPOL. The default value is suitable for most -# cases. -# -# EAP-PSK variables: -# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format -# nai: user NAI -# -# EAP-PAX variables: -# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format -# -# EAP-SAKE variables: -# eappsk: 32-byte (256-bit, 64 hex digits) pre-shared key in hex format -# (this is concatenation of Root-Secret-A and Root-Secret-B) -# nai: user NAI (PEERID) -# -# EAP-GPSK variables: -# eappsk: Pre-shared key in hex format (at least 128 bits, i.e., 32 hex digits) -# nai: user NAI (ID_Client) -# -# EAP-FAST variables: -# pac_file: File path for the PAC entries. wpa_supplicant will need to be able -# to create this file and write updates to it when PAC is being -# provisioned or refreshed. Full path to the file should be used since -# working directory may change when wpa_supplicant is run in the -# background. Alternatively, a named configuration blob can be used by -# setting this to blob:// -# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST -# credentials (PAC) -# -# wpa_supplicant supports number of "EAP workarounds" to work around -# interoperability issues with incorrectly behaving authentication servers. -# These are enabled by default because some of the issues are present in large -# number of authentication servers. Strict EAP conformance mode can be -# configured by disabling workarounds with eap_workaround=0. - -# Example blocks: - -# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers -network={ - ssid="simple" - psk="very secret passphrase" - priority=5 -} - -# Same as previous, but request SSID-specific scanning (for APs that reject -# broadcast SSID) -network={ - ssid="second ssid" - scan_ssid=1 - psk="very secret passphrase" - priority=2 -} - -# Only WPA-PSK is used. Any valid cipher combination is accepted. -network={ - ssid="example" - proto=WPA - key_mgmt=WPA-PSK - pairwise=CCMP TKIP - group=CCMP TKIP WEP104 WEP40 - psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb - priority=2 -} - -# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104 -# or WEP40 as the group cipher will not be accepted. -network={ - ssid="example" - proto=RSN - key_mgmt=WPA-EAP - pairwise=CCMP TKIP - group=CCMP TKIP - eap=TLS - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - priority=1 -} - -# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel -# (e.g., Radiator) -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=PEAP - identity="user@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - phase1="peaplabel=1" - phase2="auth=MSCHAPV2" - priority=10 -} - -# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the -# unencrypted use. Real identity is sent only within an encrypted TLS tunnel. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - priority=2 -} - -# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted -# use. Real identity is sent only within an encrypted TLS tunnel. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - phase2="auth=MSCHAPV2" -} - -# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner -# authentication. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - # Phase1 / outer authentication - anonymous_identity="anonymous@example.com" - ca_cert="/etc/cert/ca.pem" - # Phase 2 / inner authentication - phase2="autheap=TLS" - ca_cert2="/etc/cert/ca2.pem" - client_cert2="/etc/cer/user.pem" - private_key2="/etc/cer/user.prv" - private_key2_passwd="password" - priority=2 -} - -# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and -# group cipher. -network={ - ssid="example" - bssid=00:11:22:33:44:55 - proto=WPA RSN - key_mgmt=WPA-PSK WPA-EAP - pairwise=CCMP - group=CCMP - psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb -} - -# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP -# and all valid ciphers. -network={ - ssid=00010203 - psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f -} - - -# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using -# EAP-TLS for authentication and key generation; require both unicast and -# broadcast WEP keys. -network={ - ssid="1x-test" - key_mgmt=IEEE8021X - eap=TLS - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - eapol_flags=3 -} - - -# LEAP with dynamic WEP keys -network={ - ssid="leap-example" - key_mgmt=IEEE8021X - eap=LEAP - identity="user" - password="foobar" -} - -# Plaintext connection (no WPA, no IEEE 802.1X) -network={ - ssid="plaintext-test" - key_mgmt=NONE -} - - -# Shared WEP key connection (no WPA, no IEEE 802.1X) -network={ - ssid="static-wep-test" - key_mgmt=NONE - wep_key0="abcde" - wep_key1=0102030405 - wep_key2="1234567890123" - wep_tx_keyidx=0 - priority=5 -} - - -# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key -# IEEE 802.11 authentication -network={ - ssid="static-wep-test2" - key_mgmt=NONE - wep_key0="abcde" - wep_key1=0102030405 - wep_key2="1234567890123" - wep_tx_keyidx=0 - priority=5 - auth_alg=SHARED -} - - -# IBSS/ad-hoc network with WPA-None/TKIP. -network={ - ssid="test adhoc" - mode=1 - proto=WPA - key_mgmt=WPA-NONE - pairwise=NONE - group=TKIP - psk="secret passphrase" -} - - -# Catch all example that allows more or less all configuration modes -network={ - ssid="example" - scan_ssid=1 - key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE - pairwise=CCMP TKIP - group=CCMP TKIP WEP104 WEP40 - psk="very secret passphrase" - eap=TTLS PEAP TLS - identity="user@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - phase1="peaplabel=0" -} - -# Example of EAP-TLS with smartcard (openssl engine) -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TLS - proto=RSN - pairwise=CCMP TKIP - group=CCMP TKIP - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - - engine=1 - - # The engine configured here must be available. Look at - # OpenSSL engine support in the global section. - # The key available through the engine must be the private key - # matching the client certificate configured above. - - # use the opensc engine - #engine_id="opensc" - #key_id="45" - - # use the pkcs11 engine - engine_id="pkcs11" - key_id="id_45" - - # Optional PIN configuration; this can be left out and PIN will be - # asked through the control interface - pin="1234" -} - -# Example configuration showing how to use an inlined blob as a CA certificate -# data instead of using external file -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="blob://exampleblob" - priority=20 -} - -blob-base64-exampleblob={ -SGVsbG8gV29ybGQhCg== -} - - -# Wildcard match for SSID (plaintext APs only). This example select any -# open AP regardless of its SSID. -network={ - key_mgmt=NONE -} diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa_supplicant.conf-sane b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa_supplicant.conf-sane deleted file mode 100644 index c91ffe0c84..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-1.0/wpa_supplicant.conf-sane +++ /dev/null @@ -1,7 +0,0 @@ -ctrl_interface=/var/run/wpa_supplicant -ctrl_interface_group=0 -update_config=1 - -network={ - key_mgmt=NONE -} diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-2.0.inc b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-2.0.inc new file mode 100644 index 0000000000..89910a0589 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant-2.0.inc @@ -0,0 +1,84 @@ +DESCRIPTION = "A Client for Wi-Fi Protected Access (WPA)." +HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/" +BUGTRACKER = "http://hostap.epitest.fi/bugz/" +SECTION = "network" +LICENSE = "BSD" +LIC_FILES_CHKSUM = "file://../COPYING;md5=ab87f20cd7e8c0d0a6539b34d3791d0e \ + file://../README;md5=5cb758942d25f6f61fd4ac388fd446fa \ + file://wpa_supplicant.c;beginline=1;endline=12;md5=cba4fa09fa364da845ca546f21008909" +DEPENDS = "gnutls dbus libnl" +RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli" + +SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \ + file://defconfig-gnutls \ + file://wpa-supplicant.sh \ + file://wpa_supplicant.conf \ + file://wpa_supplicant.conf-sane \ + file://99_wpa_supplicant" + +S = "${WORKDIR}/wpa_supplicant-${PV}/wpa_supplicant" + +PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli " +FILES_wpa-supplicant-passphrase = "${bindir}/wpa_passphrase" +FILES_wpa-supplicant-cli = "${sbindir}/wpa_cli" +FILES_${PN} += "${datadir}/dbus-1/system-services/* ${systemd_unitdir}/system/*" +CONFFILES_${PN} += "${sysconfdir}/wpa_supplicant.conf" + +do_configure () { + echo "CFLAGS +=\"-I${STAGING_INCDIR}/libnl3\"" >> ${WORKDIR}/defconfig-gnutls + install -m 0755 ${WORKDIR}/defconfig-gnutls .config +} + +export EXTRA_CFLAGS = "${CFLAGS}" +export BINDIR = "${sbindir}" + +do_compile () { + unset CFLAGS CPPFLAGS CXXFLAGS + oe_runmake +} + +do_install () { + install -d ${D}${sbindir} + install -m 755 wpa_supplicant ${D}${sbindir} + install -m 755 wpa_cli ${D}${sbindir} + + install -d ${D}${bindir} + install -m 755 wpa_passphrase ${D}${bindir} + + install -d ${D}${docdir}/wpa_supplicant + install -m 644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant + + install -d ${D}${sysconfdir} + install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf + + install -d ${D}${sysconfdir}/network/if-pre-up.d/ + install -d ${D}${sysconfdir}/network/if-post-down.d/ + install -d ${D}${sysconfdir}/network/if-down.d/ + install -m 755 ${WORKDIR}/wpa-supplicant.sh ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant + cd ${D}${sysconfdir}/network/ && \ + ln -sf ../if-pre-up.d/wpa-supplicant if-post-down.d/wpa-supplicant + + install -d ${D}/${sysconfdir}/dbus-1/system.d + install -m 644 ${S}/dbus/dbus-wpa_supplicant.conf ${D}/${sysconfdir}/dbus-1/system.d + install -d ${D}/${datadir}/dbus-1/system-services + install -m 644 ${S}/dbus/*.service ${D}/${datadir}/dbus-1/system-services + + install -d ${D}/${systemd_unitdir}/system + install -m 644 ${S}/systemd/wpa_supplicant.service ${D}/${systemd_unitdir}/system + + install -d ${D}/etc/default/volatiles + install -m 0644 ${WORKDIR}/99_wpa_supplicant ${D}/etc/default/volatiles +} + +pkg_postinst_wpa-supplicant () { + # If we're offline, we don't need to do this. + if [ "x$D" != "x" ]; then + exit 0 + fi + + DBUSPID=`pidof dbus-daemon` + + if [ "x$DBUSPID" != "x" ]; then + /etc/init.d/dbus-1 reload || true + fi +} diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant new file mode 100644 index 0000000000..6ff4dd8826 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant @@ -0,0 +1 @@ +d root root 0700 /var/run/wpa_supplicant none diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig-gnutls b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig-gnutls new file mode 100644 index 0000000000..e041b4d36f --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig-gnutls @@ -0,0 +1,409 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed OpenSSL +# or GnuTLS in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Example configuration for various cross-compilation platforms + +#### sveasoft (e.g., for Linksys WRT54G) ###################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS += -I../src/include -I../../src/router/openssl/include +#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl +############################################################################### + +#### openwrt (e.g., for Linksys WRT54G) ####################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ +# -I../WRT54GS/release/src/include +#LIBS = -lssl +############################################################################### + + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_MADWIFI=y +# Set include directory to the madwifi source tree +#CFLAGS += -I../../madwifi + +# Driver interface for ndiswrapper +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +# CONFIG_DRIVER_ATMEL=y + +# Driver interface for old Broadcom driver +# Please note that the newer Broadcom driver ("hybrid Linux driver") supports +# Linux wireless extensions and does not need (or even work) with the old +# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. +#CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100/2200 driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_IPW=y + +# Driver interface for Ralink driver +#CONFIG_DRIVER_RALINK=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_LIBNL32=y +CONFIG_DRIVER_NL80211=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Include client MLME (management frame processing) for test driver +# This can be used to test MLME operations in hostapd with the test interface. +# space. +#CONFIG_CLIENT_MLME=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + +# EAP-SAKE +#CONFIG_EAP_SAKE=y + +# EAP-GPSK +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +#CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# named_pipe = Windows Named Pipe (default for Windows) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to +# save about 1 kB in code size when building only WPA-Personal (no EAP support) +# or 6 kB if building for WPA-Enterprise. +#CONFIG_NO_WPA2=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operatins system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +# eloop_none = Empty template +#CONFIG_ELOOP=eloop + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +#CONFIG_TLS=openssl + +# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. +# You need CONFIG_TLS=gnutls for this to have any effect. Please note that +# even though the core GnuTLS library is released under LGPL, this extra +# library uses GPL and as such, the terms of GPL apply to the combination +# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not +# apply for distribution of the resulting binary. +#CONFIG_GNUTLS_EXTRA=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +#CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +#CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, comment out these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, comment out these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz +CONFIG_TLS = gnutls +#CONFIG_GNUTLS_EXTRA=y +CONFIG_CTRL_IFACE_DBUS=y +CONFIG_CTRL_IFACE_DBUS_NEW=y diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh new file mode 100644 index 0000000000..5c9e5d33a7 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh @@ -0,0 +1,85 @@ +#!/bin/sh + + +WPA_SUP_BIN="/usr/sbin/wpa_supplicant" +WPA_SUP_PNAME="wpa_supplicant" +WPA_SUP_PIDFILE="/var/run/wpa_supplicant.$IFACE.pid" +WPA_SUP_OPTIONS="-B -P $WPA_SUP_PIDFILE -i $IFACE" + +VERBOSITY=0 + + +if [ -s "$IF_WPA_CONF" ]; then + WPA_SUP_CONF="-c $IF_WPA_CONF" +else + exit 0 +fi + +if [ ! -x "$WPA_SUP_BIN" ]; then + + if [ "$VERBOSITY" = "1" ]; then + echo "$WPA_SUP_PNAME: binaries not executable or missing from $WPA_SUP_BIN" + fi + + exit 1 +fi + +if [ "$MODE" = "start" ] ; then + # driver type of interface, defaults to wext when undefined + if [ -s "/etc/wpa_supplicant/driver.$IFACE" ]; then + IF_WPA_DRIVER=$(cat "/etc/wpa_supplicant/driver.$IFACE") + elif [ -z "$IF_WPA_DRIVER" ]; then + + if [ "$VERBOSITY" = "1" ]; then + echo "$WPA_SUP_PNAME: wpa-driver not provided, using \"wext\"" + fi + + IF_WPA_DRIVER="wext" + fi + + # if we have passed the criteria, start wpa_supplicant + if [ -n "$WPA_SUP_CONF" ]; then + + if [ "$VERBOSITY" = "1" ]; then + echo "$WPA_SUP_PNAME: $WPA_SUP_BIN $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER" + fi + + start-stop-daemon --start --quiet \ + --name $WPA_SUP_PNAME --startas $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE \ + -- $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER + fi + + # if the interface socket exists, then wpa_supplicant was invoked successfully + if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then + + if [ "$VERBOSITY" = "1" ]; then + echo "$WPA_SUP_PNAME: ctrl_interface socket located at $WPA_COMMON_CTRL_IFACE/$IFACE" + fi + + exit 0 + + fi + +elif [ "$MODE" = "stop" ]; then + + if [ -f "$WPA_SUP_PIDFILE" ]; then + + if [ "$VERBOSITY" = "1" ]; then + echo "$WPA_SUP_PNAME: terminating $WPA_SUP_PNAME daemon" + fi + + start-stop-daemon --stop --quiet \ + --name $WPA_SUP_PNAME --pidfile $WPA_SUP_PIDFILE + + if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then + rm -f $WPA_COMMON_CTRL_IFACE/$IFACE + fi + + if [ -f "$WPA_SUP_PIDFILE" ]; then + rm -f $WPA_SUP_PIDFILE + fi + fi + +fi + +exit 0 diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf new file mode 100644 index 0000000000..68258f5ee2 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf @@ -0,0 +1,690 @@ +##### Example wpa_supplicant configuration file ############################### +# +# This file describes configuration file format and lists all available option. +# Please also take a look at simpler configuration examples in 'examples' +# subdirectory. +# +# Empty lines and lines starting with # are ignored + +# NOTE! This file may contain password information and should probably be made +# readable only by root user on multiuser systems. + +# Note: All file paths in this configuration file should use full (absolute, +# not relative to working directory) path in order to allow working directory +# to be changed. This can happen if wpa_supplicant is run in the background. + +# Whether to allow wpa_supplicant to update (overwrite) configuration +# +# This option can be used to allow wpa_supplicant to overwrite configuration +# file whenever configuration is changed (e.g., new network block is added with +# wpa_cli or wpa_gui, or a password is changed). This is required for +# wpa_cli/wpa_gui to be able to store the configuration changes permanently. +# Please note that overwriting configuration file will remove the comments from +# it. +#update_config=1 + +# global configuration (shared by all network blocks) +# +# Parameters for the control interface. If this is specified, wpa_supplicant +# will open a control interface that is available for external programs to +# manage wpa_supplicant. The meaning of this string depends on which control +# interface mechanism is used. For all cases, the existence of this parameter +# in configuration is used to determine whether the control interface is +# enabled. +# +# For UNIX domain sockets (default on Linux and BSD): This is a directory that +# will be created for UNIX domain sockets for listening to requests from +# external programs (CLI/GUI, etc.) for status information and configuration. +# The socket file will be named based on the interface name, so multiple +# wpa_supplicant processes can be run at the same time if more than one +# interface is used. +# /var/run/wpa_supplicant is the recommended directory for sockets and by +# default, wpa_cli will use it when trying to connect with wpa_supplicant. +# +# Access control for the control interface can be configured by setting the +# directory to allow only members of a group to use sockets. This way, it is +# possible to run wpa_supplicant as root (since it needs to change network +# configuration and open raw sockets) and still allow GUI/CLI components to be +# run as non-root users. However, since the control interface can be used to +# change the network configuration, this access needs to be protected in many +# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you +# want to allow non-root users to use the control interface, add a new group +# and change this value to match with that group. Add users that should have +# control interface access to this group. If this variable is commented out or +# not included in the configuration file, group will not be changed from the +# value it got by default when the directory or socket was created. +# +# When configuring both the directory and group, use following format: +# DIR=/var/run/wpa_supplicant GROUP=wheel +# DIR=/var/run/wpa_supplicant GROUP=0 +# (group can be either group name or gid) +# +# For UDP connections (default on Windows): The value will be ignored. This +# variable is just used to select that the control interface is to be created. +# The value can be set to, e.g., udp (ctrl_interface=udp) +# +# For Windows Named Pipe: This value can be used to set the security descriptor +# for controlling access to the control interface. Security descriptor can be +# set using Security Descriptor String Format (see http://msdn.microsoft.com/ +# library/default.asp?url=/library/en-us/secauthz/security/ +# security_descriptor_string_format.asp). The descriptor string needs to be +# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty +# DACL (which will reject all connections). See README-Windows.txt for more +# information about SDDL string format. +# +ctrl_interface=/var/run/wpa_supplicant + +# IEEE 802.1X/EAPOL version +# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines +# EAPOL version 2. However, there are many APs that do not handle the new +# version number correctly (they seem to drop the frames completely). In order +# to make wpa_supplicant interoperate with these APs, the version number is set +# to 1 by default. This configuration value can be used to set it to the new +# version (2). +eapol_version=1 + +# AP scanning/selection +# By default, wpa_supplicant requests driver to perform AP scanning and then +# uses the scan results to select a suitable AP. Another alternative is to +# allow the driver to take care of AP scanning and selection and use +# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association +# information from the driver. +# 1: wpa_supplicant initiates scanning and AP selection +# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association +# parameters (e.g., WPA IE generation); this mode can also be used with +# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with +# APs (i.e., external program needs to control association). This mode must +# also be used when using wired Ethernet drivers. +# 2: like 0, but associate with APs using security policy and SSID (but not +# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to +# enable operation with hidden SSIDs and optimized roaming; in this mode, +# the network blocks in the configuration file are tried one by one until +# the driver reports successful association; each network block should have +# explicit security policy (i.e., only one option in the lists) for +# key_mgmt, pairwise, group, proto variables +ap_scan=1 + +# EAP fast re-authentication +# By default, fast re-authentication is enabled for all EAP methods that +# support it. This variable can be used to disable fast re-authentication. +# Normally, there is no need to disable this. +fast_reauth=1 + +# OpenSSL Engine support +# These options can be used to load OpenSSL engines. +# The two engines that are supported currently are shown below: +# They are both from the opensc project (http://www.opensc.org/) +# By default no engines are loaded. +# make the opensc engine available +#opensc_engine_path=/usr/lib/opensc/engine_opensc.so +# make the pkcs11 engine available +#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so +# configure the path to the pkcs11 module required by the pkcs11 engine +#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so + +# Dynamic EAP methods +# If EAP methods were built dynamically as shared object files, they need to be +# loaded here before being used in the network blocks. By default, EAP methods +# are included statically in the build, so these lines are not needed +#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so +#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so + +# Driver interface parameters +# This field can be used to configure arbitrary driver interace parameters. The +# format is specific to the selected driver interface. This field is not used +# in most cases. +#driver_param="field=value" + +# Maximum lifetime for PMKSA in seconds; default 43200 +#dot11RSNAConfigPMKLifetime=43200 +# Threshold for reauthentication (percentage of PMK lifetime); default 70 +#dot11RSNAConfigPMKReauthThreshold=70 +# Timeout for security association negotiation in seconds; default 60 +#dot11RSNAConfigSATimeout=60 + +# network block +# +# Each network (usually AP's sharing the same SSID) is configured as a separate +# block in this configuration file. The network blocks are in preference order +# (the first match is used). +# +# network block fields: +# +# disabled: +# 0 = this network can be used (default) +# 1 = this network block is disabled (can be enabled through ctrl_iface, +# e.g., with wpa_cli or wpa_gui) +# +# id_str: Network identifier string for external scripts. This value is passed +# to external action script through wpa_cli as WPA_ID_STR environment +# variable to make it easier to do network specific configuration. +# +# ssid: SSID (mandatory); either as an ASCII string with double quotation or +# as hex string; network name +# +# scan_ssid: +# 0 = do not scan this SSID with specific Probe Request frames (default) +# 1 = scan with SSID-specific Probe Request frames (this can be used to +# find APs that do not accept broadcast SSID or use multiple SSIDs; +# this will add latency to scanning, so enable this only when needed) +# +# bssid: BSSID (optional); if set, this network block is used only when +# associating with the AP using the configured BSSID +# +# priority: priority group (integer) +# By default, all networks will get same priority group (0). If some of the +# networks are more desirable, this field can be used to change the order in +# which wpa_supplicant goes through the networks when selecting a BSS. The +# priority groups will be iterated in decreasing priority (i.e., the larger the +# priority value, the sooner the network is matched against the scan results). +# Within each priority group, networks will be selected based on security +# policy, signal strength, etc. +# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not +# using this priority to select the order for scanning. Instead, they try the +# networks in the order that used in the configuration file. +# +# mode: IEEE 802.11 operation mode +# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default) +# 1 = IBSS (ad-hoc, peer-to-peer) +# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) +# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has +# to be set to 2 for IBSS. WPA-None requires following network block options: +# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not +# both), and psk must also be set. +# +# proto: list of accepted protocols +# WPA = WPA/IEEE 802.11i/D3.0 +# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN) +# If not set, this defaults to: WPA RSN +# +# key_mgmt: list of accepted authenticated key management protocols +# WPA-PSK = WPA pre-shared key (this requires 'psk' field) +# WPA-EAP = WPA using EAP authentication (this can use an external +# program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication +# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically +# generated WEP keys +# NONE = WPA is not used; plaintext or static WEP could be used +# If not set, this defaults to: WPA-PSK WPA-EAP +# +# auth_alg: list of allowed IEEE 802.11 authentication algorithms +# OPEN = Open System authentication (required for WPA/WPA2) +# SHARED = Shared Key authentication (requires static WEP keys) +# LEAP = LEAP/Network EAP (only used with LEAP) +# If not set, automatic selection is used (Open System with LEAP enabled if +# LEAP is allowed as one of the EAP methods). +# +# pairwise: list of accepted pairwise (unicast) ciphers for WPA +# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] +# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] +# NONE = Use only Group Keys (deprecated, should not be included if APs support +# pairwise keys) +# If not set, this defaults to: CCMP TKIP +# +# group: list of accepted group (broadcast/multicast) ciphers for WPA +# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] +# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] +# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key +# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11] +# If not set, this defaults to: CCMP TKIP WEP104 WEP40 +# +# psk: WPA preshared key; 256-bit pre-shared key +# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., +# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be +# generated using the passphrase and SSID). ASCII passphrase must be between +# 8 and 63 characters (inclusive). +# This field is not needed, if WPA-EAP is used. +# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys +# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant +# startup and reconfiguration time can be optimized by generating the PSK only +# only when the passphrase or SSID has actually changed. +# +# eapol_flags: IEEE 802.1X/EAPOL options (bit field) +# Dynamic WEP key required for non-WPA mode +# bit0 (1): require dynamically generated unicast WEP key +# bit1 (2): require dynamically generated broadcast WEP key +# (3 = require both keys; default) +# Note: When using wired authentication, eapol_flags must be set to 0 for the +# authentication to be completed successfully. +# +# proactive_key_caching: +# Enable/disable opportunistic PMKSA caching for WPA2. +# 0 = disabled (default) +# 1 = enabled +# +# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or +# hex without quotation, e.g., 0102030405) +# wep_tx_keyidx: Default WEP key index (TX) (0..3) +# +# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is +# allowed. This is only used with RSN/WPA2. +# 0 = disabled (default) +# 1 = enabled +#peerkey=1 +# +# Following fields are only used with internal EAP implementation. +# eap: space-separated list of accepted EAP methods +# MD5 = EAP-MD5 (unsecure and does not generate keying material -> +# cannot be used with WPA; to be used as a Phase 2 method +# with EAP-PEAP or EAP-TTLS) +# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used +# as a Phase 2 method with EAP-PEAP or EAP-TTLS) +# OTP = EAP-OTP (cannot be used separately with WPA; to be used +# as a Phase 2 method with EAP-PEAP or EAP-TTLS) +# GTC = EAP-GTC (cannot be used separately with WPA; to be used +# as a Phase 2 method with EAP-PEAP or EAP-TTLS) +# TLS = EAP-TLS (client and server certificate) +# PEAP = EAP-PEAP (with tunnelled EAP authentication) +# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 +# authentication) +# If not set, all compiled in methods are allowed. +# +# identity: Identity string for EAP +# anonymous_identity: Anonymous identity string for EAP (to be used as the +# unencrypted identity with EAP types that support different tunnelled +# identity, e.g., EAP-TTLS) +# password: Password string for EAP +# ca_cert: File path to CA certificate file (PEM/DER). This file can have one +# or more trusted CA certificates. If ca_cert and ca_path are not +# included, server certificate will not be verified. This is insecure and +# a trusted CA certificate should always be configured when using +# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may +# change when wpa_supplicant is run in the background. +# On Windows, trusted CA certificates can be loaded from the system +# certificate store by setting this to cert_store://, e.g., +# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". +# Note that when running wpa_supplicant as an application, the user +# certificate store (My user account) is used, whereas computer store +# (Computer account) is used when running wpasvc as a service. +# ca_path: Directory path for CA certificate files (PEM). This path may +# contain multiple CA certificates in OpenSSL format. Common use for this +# is to point to system trusted CA list which is often installed into +# directory like /etc/ssl/certs. If configured, these certificates are +# added to the list of trusted CAs. ca_cert may also be included in that +# case, but it is not required. +# client_cert: File path to client certificate file (PEM/DER) +# Full path should be used since working directory may change when +# wpa_supplicant is run in the background. +# Alternatively, a named configuration blob can be used by setting this +# to blob://. +# private_key: File path to client private key file (PEM/DER/PFX) +# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be +# commented out. Both the private key and certificate will be read from +# the PKCS#12 file in this case. Full path should be used since working +# directory may change when wpa_supplicant is run in the background. +# Windows certificate store can be used by leaving client_cert out and +# configuring private_key in one of the following formats: +# cert://substring_to_match +# hash://certificate_thumbprint_in_hex +# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4" +# Note that when running wpa_supplicant as an application, the user +# certificate store (My user account) is used, whereas computer store +# (Computer account) is used when running wpasvc as a service. +# Alternatively, a named configuration blob can be used by setting this +# to blob://. +# private_key_passwd: Password for private key file (if left out, this will be +# asked through control interface) +# dh_file: File path to DH/DSA parameters file (in PEM format) +# This is an optional configuration file for setting parameters for an +# ephemeral DH key exchange. In most cases, the default RSA +# authentication does not use this configuration. However, it is possible +# setup RSA to use ephemeral DH key exchange. In addition, ciphers with +# DSA keys always use ephemeral DH keys. This can be used to achieve +# forward secrecy. If the file is in DSA parameters format, it will be +# automatically converted into DH params. +# subject_match: Substring to be matched against the subject of the +# authentication server certificate. If this string is set, the server +# sertificate is only accepted if it contains this string in the subject. +# The subject string is in following format: +# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com +# altsubject_match: Semicolon separated string of entries to be matched against +# the alternative subject name of the authentication server certificate. +# If this string is set, the server sertificate is only accepted if it +# contains one of the entries in an alternative subject name extension. +# altSubjectName string is in following format: TYPE:VALUE +# Example: EMAIL:server@example.com +# Example: DNS:server.example.com;DNS:server2.example.com +# Following types are supported: EMAIL, DNS, URI +# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters +# (string with field-value pairs, e.g., "peapver=0" or +# "peapver=1 peaplabel=1") +# 'peapver' can be used to force which PEAP version (0 or 1) is used. +# 'peaplabel=1' can be used to force new label, "client PEAP encryption", +# to be used during key derivation when PEAPv1 or newer. Most existing +# PEAPv1 implementation seem to be using the old label, "client EAP +# encryption", and wpa_supplicant is now using that as the default value. +# Some servers, e.g., Radiator, may require peaplabel=1 configuration to +# interoperate with PEAPv1; see eap_testing.txt for more details. +# 'peap_outer_success=0' can be used to terminate PEAP authentication on +# tunneled EAP-Success. This is required with some RADIUS servers that +# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., +# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) +# include_tls_length=1 can be used to force wpa_supplicant to include +# TLS Message Length field in all TLS messages even if they are not +# fragmented. +# sim_min_num_chal=3 can be used to configure EAP-SIM to require three +# challenges (by default, it accepts 2 or 3) +# phase2: Phase2 (inner authentication with TLS tunnel) parameters +# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or +# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS) +# Following certificate/private key fields are used in inner Phase2 +# authentication when using EAP-TTLS or EAP-PEAP. +# ca_cert2: File path to CA certificate file. This file can have one or more +# trusted CA certificates. If ca_cert2 and ca_path2 are not included, +# server certificate will not be verified. This is insecure and a trusted +# CA certificate should always be configured. +# ca_path2: Directory path for CA certificate files (PEM) +# client_cert2: File path to client certificate file +# private_key2: File path to client private key file +# private_key2_passwd: Password for private key file +# dh_file2: File path to DH/DSA parameters file (in PEM format) +# subject_match2: Substring to be matched against the subject of the +# authentication server certificate. +# altsubject_match2: Substring to be matched against the alternative subject +# name of the authentication server certificate. +# +# fragment_size: Maximum EAP fragment size in bytes (default 1398). +# This value limits the fragment size for EAP methods that support +# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set +# small enough to make the EAP messages fit in MTU of the network +# interface used for EAPOL. The default value is suitable for most +# cases. +# +# EAP-PSK variables: +# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format +# nai: user NAI +# +# EAP-PAX variables: +# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format +# +# EAP-SAKE variables: +# eappsk: 32-byte (256-bit, 64 hex digits) pre-shared key in hex format +# (this is concatenation of Root-Secret-A and Root-Secret-B) +# nai: user NAI (PEERID) +# +# EAP-GPSK variables: +# eappsk: Pre-shared key in hex format (at least 128 bits, i.e., 32 hex digits) +# nai: user NAI (ID_Client) +# +# EAP-FAST variables: +# pac_file: File path for the PAC entries. wpa_supplicant will need to be able +# to create this file and write updates to it when PAC is being +# provisioned or refreshed. Full path to the file should be used since +# working directory may change when wpa_supplicant is run in the +# background. Alternatively, a named configuration blob can be used by +# setting this to blob:// +# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST +# credentials (PAC) +# +# wpa_supplicant supports number of "EAP workarounds" to work around +# interoperability issues with incorrectly behaving authentication servers. +# These are enabled by default because some of the issues are present in large +# number of authentication servers. Strict EAP conformance mode can be +# configured by disabling workarounds with eap_workaround=0. + +# Example blocks: + +# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers +network={ + ssid="simple" + psk="very secret passphrase" + priority=5 +} + +# Same as previous, but request SSID-specific scanning (for APs that reject +# broadcast SSID) +network={ + ssid="second ssid" + scan_ssid=1 + psk="very secret passphrase" + priority=2 +} + +# Only WPA-PSK is used. Any valid cipher combination is accepted. +network={ + ssid="example" + proto=WPA + key_mgmt=WPA-PSK + pairwise=CCMP TKIP + group=CCMP TKIP WEP104 WEP40 + psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb + priority=2 +} + +# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104 +# or WEP40 as the group cipher will not be accepted. +network={ + ssid="example" + proto=RSN + key_mgmt=WPA-EAP + pairwise=CCMP TKIP + group=CCMP TKIP + eap=TLS + identity="user@example.com" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + private_key="/etc/cert/user.prv" + private_key_passwd="password" + priority=1 +} + +# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel +# (e.g., Radiator) +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=PEAP + identity="user@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + phase1="peaplabel=1" + phase2="auth=MSCHAPV2" + priority=10 +} + +# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the +# unencrypted use. Real identity is sent only within an encrypted TLS tunnel. +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + identity="user@example.com" + anonymous_identity="anonymous@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + priority=2 +} + +# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted +# use. Real identity is sent only within an encrypted TLS tunnel. +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + identity="user@example.com" + anonymous_identity="anonymous@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + phase2="auth=MSCHAPV2" +} + +# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner +# authentication. +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + # Phase1 / outer authentication + anonymous_identity="anonymous@example.com" + ca_cert="/etc/cert/ca.pem" + # Phase 2 / inner authentication + phase2="autheap=TLS" + ca_cert2="/etc/cert/ca2.pem" + client_cert2="/etc/cer/user.pem" + private_key2="/etc/cer/user.prv" + private_key2_passwd="password" + priority=2 +} + +# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and +# group cipher. +network={ + ssid="example" + bssid=00:11:22:33:44:55 + proto=WPA RSN + key_mgmt=WPA-PSK WPA-EAP + pairwise=CCMP + group=CCMP + psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb +} + +# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP +# and all valid ciphers. +network={ + ssid=00010203 + psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f +} + + +# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using +# EAP-TLS for authentication and key generation; require both unicast and +# broadcast WEP keys. +network={ + ssid="1x-test" + key_mgmt=IEEE8021X + eap=TLS + identity="user@example.com" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + private_key="/etc/cert/user.prv" + private_key_passwd="password" + eapol_flags=3 +} + + +# LEAP with dynamic WEP keys +network={ + ssid="leap-example" + key_mgmt=IEEE8021X + eap=LEAP + identity="user" + password="foobar" +} + +# Plaintext connection (no WPA, no IEEE 802.1X) +network={ + ssid="plaintext-test" + key_mgmt=NONE +} + + +# Shared WEP key connection (no WPA, no IEEE 802.1X) +network={ + ssid="static-wep-test" + key_mgmt=NONE + wep_key0="abcde" + wep_key1=0102030405 + wep_key2="1234567890123" + wep_tx_keyidx=0 + priority=5 +} + + +# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key +# IEEE 802.11 authentication +network={ + ssid="static-wep-test2" + key_mgmt=NONE + wep_key0="abcde" + wep_key1=0102030405 + wep_key2="1234567890123" + wep_tx_keyidx=0 + priority=5 + auth_alg=SHARED +} + + +# IBSS/ad-hoc network with WPA-None/TKIP. +network={ + ssid="test adhoc" + mode=1 + proto=WPA + key_mgmt=WPA-NONE + pairwise=NONE + group=TKIP + psk="secret passphrase" +} + + +# Catch all example that allows more or less all configuration modes +network={ + ssid="example" + scan_ssid=1 + key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE + pairwise=CCMP TKIP + group=CCMP TKIP WEP104 WEP40 + psk="very secret passphrase" + eap=TTLS PEAP TLS + identity="user@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + private_key="/etc/cert/user.prv" + private_key_passwd="password" + phase1="peaplabel=0" +} + +# Example of EAP-TLS with smartcard (openssl engine) +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TLS + proto=RSN + pairwise=CCMP TKIP + group=CCMP TKIP + identity="user@example.com" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + + engine=1 + + # The engine configured here must be available. Look at + # OpenSSL engine support in the global section. + # The key available through the engine must be the private key + # matching the client certificate configured above. + + # use the opensc engine + #engine_id="opensc" + #key_id="45" + + # use the pkcs11 engine + engine_id="pkcs11" + key_id="id_45" + + # Optional PIN configuration; this can be left out and PIN will be + # asked through the control interface + pin="1234" +} + +# Example configuration showing how to use an inlined blob as a CA certificate +# data instead of using external file +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + identity="user@example.com" + anonymous_identity="anonymous@example.com" + password="foobar" + ca_cert="blob://exampleblob" + priority=20 +} + +blob-base64-exampleblob={ +SGVsbG8gV29ybGQhCg== +} + + +# Wildcard match for SSID (plaintext APs only). This example select any +# open AP regardless of its SSID. +network={ + key_mgmt=NONE +} diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf-sane b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf-sane new file mode 100644 index 0000000000..c91ffe0c84 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf-sane @@ -0,0 +1,7 @@ +ctrl_interface=/var/run/wpa_supplicant +ctrl_interface_group=0 +update_config=1 + +network={ + key_mgmt=NONE +} diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_1.0.bb b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_1.0.bb deleted file mode 100644 index 115007563e..0000000000 --- a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_1.0.bb +++ /dev/null @@ -1,6 +0,0 @@ -require wpa-supplicant-1.0.inc - -PR = "r3" - -SRC_URI[md5sum] = "8650f6aa23646ef634402552d0669640" -SRC_URI[sha256sum] = "91d41d473a5aafa2e25dd6577ebda975c4d4a3188850a53e31feaf7c04482b9c" diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.0.bb b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.0.bb new file mode 100644 index 0000000000..22e42dd3f9 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.0.bb @@ -0,0 +1,6 @@ +require wpa-supplicant-2.0.inc + +PR = "r0" + +SRC_URI[md5sum] = "3be2ebfdcced52e00eda0afe2889839d" +SRC_URI[sha256sum] = "2c115609fbb5223d51381084a5c944455a8afcda81d584173ff55ba233379e09" -- cgit v1.2.3