From fd616b6d25557391843cac8e98c62a81f1e17f4b Mon Sep 17 00:00:00 2001 From: Marcin Juszkiewicz Date: Mon, 31 Dec 2007 15:26:26 +0000 Subject: linux-rp: update 2.6.24-rc1 to 2.6.24-rc6, add some fixes from 2.6.23 git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3391 311d38ba-8fff-0310-9ca6-ca027cbcb966 --- .../arm_pxa_20070923.patch | 5877 ---- .../binutils-buildid-arm.patch | 16 - .../connectplus-remove-ide-HACK.patch | 12 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-akita | 1694 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-bootcdx86 | 1607 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-c7x0 | 1695 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-collie | 1741 - .../defconfig-htcuniversal | 1281 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-hx2000 | 1168 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-poodle | 1659 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-qemuarm | 1194 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-qemux86 | 1568 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-spitz | 1690 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-tosa | 1614 - .../linux-rp-2.6.23+2.6.24-rc1/defconfig-zylonite | 1457 - .../hostap-monitor-mode.patch | 209 - .../linux-rp-2.6.23+2.6.24-rc1/htcuni-acx.patch | 33526 ------------------- .../linux/linux-rp-2.6.23+2.6.24-rc1/htcuni.patch | 8044 ----- .../hx2750_base-r31.patch | 1094 - .../mmcsd_no_scr_check-r2.patch | 29 - .../linux-rp-2.6.23+2.6.24-rc1/pda-power.patch | 3373 -- .../pxa-serial-hack.patch | 90 - .../pxa27x_overlay-r8.patch | 2427 -- .../pxa_fb_overlay.patch | 26 - ...t-for-non-standard-xtals-to-16c950-driver.patch | 155 - .../squashfs3.0-2.6.15.patch | 4189 --- .../squashfs3.2-2.6.20-r0.patch | 4376 --- .../uvesafb-0.1-rc3-2.6.22.patch | 2590 -- .../linux-rp-2.6.23+2.6.24-rc1/vt_ioctl_race.patch | 46 - .../w100fb-unused-var.patch | 17 - .../wm97xx-lcdnoise-r0.patch | 208 - .../linux-rp-2.6.23+2.6.24-rc1/zylonite-boot.patch | 45 - .../arm_pxa_20070923.patch | 5877 ++++ .../binutils-buildid-arm.patch | 16 + .../connectplus-remove-ide-HACK.patch | 12 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-akita | 1694 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-bootcdx86 | 1607 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-c7x0 | 1695 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-collie | 1741 + .../defconfig-htcuniversal | 1281 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-hx2000 | 1168 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-poodle | 1659 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-qemuarm | 1194 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-qemux86 | 1568 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-spitz | 1690 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-tosa | 1614 + .../linux-rp-2.6.23+2.6.24-rc6/defconfig-zylonite | 1457 + .../hostap-monitor-mode.patch | 209 + .../linux-rp-2.6.23+2.6.24-rc6/htcuni-acx.patch | 33526 +++++++++++++++++++ .../linux/linux-rp-2.6.23+2.6.24-rc6/htcuni.patch | 8044 +++++ .../hx2750_base-r31.patch | 1094 + .../mmcsd_no_scr_check-r2.patch | 29 + .../linux-rp-2.6.23+2.6.24-rc6/pda-power.patch | 3373 ++ .../pxa-serial-hack.patch | 90 + .../pxa27x_overlay-r8.patch | 2427 ++ .../pxa_fb_overlay.patch | 26 + ...t-for-non-standard-xtals-to-16c950-driver.patch | 155 + .../squashfs3.0-2.6.15.patch | 4189 +++ .../squashfs3.2-2.6.20-r0.patch | 4376 +++ .../uvesafb-0.1-rc3-2.6.22.patch | 2590 ++ .../versatile-armv6.patch | 19 + .../linux-rp-2.6.23+2.6.24-rc6/vt_ioctl_race.patch | 46 + .../w100fb-unused-var.patch | 17 + .../wm97xx-lcdnoise-r0.patch | 208 + .../linux-rp-2.6.23+2.6.24-rc6/zylonite-boot.patch | 45 + meta/packages/linux/linux-rp_2.6.23+2.6.24-rc1.bb | 126 - meta/packages/linux/linux-rp_2.6.23+2.6.24-rc6.bb | 128 + 67 files changed, 84864 insertions(+), 84843 deletions(-) delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/arm_pxa_20070923.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/binutils-buildid-arm.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/connectplus-remove-ide-HACK.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-akita delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-bootcdx86 delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-c7x0 delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-collie delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-htcuniversal delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-hx2000 delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-poodle delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-qemuarm delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-qemux86 delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-spitz delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-tosa delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-zylonite delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/hostap-monitor-mode.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/htcuni-acx.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/htcuni.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/hx2750_base-r31.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/mmcsd_no_scr_check-r2.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pda-power.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa-serial-hack.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa27x_overlay-r8.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa_fb_overlay.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/squashfs3.0-2.6.15.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/squashfs3.2-2.6.20-r0.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/uvesafb-0.1-rc3-2.6.22.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/vt_ioctl_race.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/w100fb-unused-var.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/wm97xx-lcdnoise-r0.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/zylonite-boot.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/arm_pxa_20070923.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/binutils-buildid-arm.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/connectplus-remove-ide-HACK.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-akita create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-bootcdx86 create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-c7x0 create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-collie create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-htcuniversal create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-hx2000 create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-poodle create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-qemuarm create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-qemux86 create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-spitz create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-tosa create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/defconfig-zylonite create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/hostap-monitor-mode.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/htcuni-acx.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/htcuni.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/hx2750_base-r31.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/mmcsd_no_scr_check-r2.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/pda-power.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/pxa-serial-hack.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/pxa27x_overlay-r8.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/pxa_fb_overlay.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/squashfs3.0-2.6.15.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/squashfs3.2-2.6.20-r0.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/uvesafb-0.1-rc3-2.6.22.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/versatile-armv6.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/vt_ioctl_race.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/w100fb-unused-var.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/wm97xx-lcdnoise-r0.patch create mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc6/zylonite-boot.patch delete mode 100644 meta/packages/linux/linux-rp_2.6.23+2.6.24-rc1.bb create mode 100644 meta/packages/linux/linux-rp_2.6.23+2.6.24-rc6.bb diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/arm_pxa_20070923.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/arm_pxa_20070923.patch deleted file mode 100644 index ad4ce996df..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/arm_pxa_20070923.patch +++ /dev/null @@ -1,5877 +0,0 @@ -# Base git commit: da8f153e51290e7438ba7da66234a864e5d3e1c1 -# (Revert "x86_64: Quicklist support for x86_64") -# -# Author: eric miao (Wed Sep 12 03:13:17 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:19 BST 2007) -# -# [ARM] pxa: PXA3xx base support -# -# Signed-off-by: eric miao -# Signed-off-by: Russell King -# -# arch/arm/Kconfig | 6 -# arch/arm/boot/compressed/head-xscale.S | 4 -# arch/arm/mach-pxa/Kconfig | 30 + -# arch/arm/mach-pxa/Makefile | 9 -# arch/arm/mach-pxa/clock.c | 79 ++-- -# arch/arm/mach-pxa/clock.h | 43 ++ -# arch/arm/mach-pxa/devices.h | 3 -# arch/arm/mach-pxa/generic.c | 146 ++++--- -# arch/arm/mach-pxa/generic.h | 26 + -# arch/arm/mach-pxa/irq.c | 80 ---- -# arch/arm/mach-pxa/mfp.c | 235 ++++++++++++ -# arch/arm/mach-pxa/pxa25x.c | 90 ++++ -# arch/arm/mach-pxa/pxa27x.c | 127 ++++++ -# arch/arm/mach-pxa/pxa300.c | 93 +++++ -# arch/arm/mach-pxa/pxa320.c | 88 ++++ -# arch/arm/mach-pxa/pxa3xx.c | 216 +++++++++++ -# arch/arm/mach-pxa/time.c | 53 ++ -# arch/arm/mach-pxa/zylonite.c | 184 +++++++++ -# arch/arm/mach-pxa/zylonite_pxa300.c | 188 ++++++++++ -# arch/arm/mach-pxa/zylonite_pxa320.c | 173 +++++++++ -# arch/arm/mm/Kconfig | 4 -# drivers/i2c/busses/i2c-pxa.c | 45 +- -# drivers/input/keyboard/pxa27x_keyboard.c | 25 + -# drivers/mmc/host/pxamci.c | 43 +- -# drivers/mmc/host/pxamci.h | 14 -# drivers/mtd/maps/lubbock-flash.c | 9 -# drivers/mtd/maps/mainstone-flash.c | 5 -# drivers/net/irda/pxaficp_ir.c | 51 ++ -# drivers/net/smc91x.c | 62 --- -# drivers/net/smc91x.h | 71 +++ -# drivers/serial/pxa.c | 163 ++++---- -# drivers/serial/serial_core.c | 18 -# drivers/usb/gadget/pxa2xx_udc.c | 68 ++- -# drivers/usb/gadget/pxa2xx_udc.h | 1 -# drivers/video/pxafb.c | 36 + -# drivers/video/pxafb.h | 1 -# include/asm-arm/arch-pxa/hardware.h | 72 +++ -# include/asm-arm/arch-pxa/irqs.h | 6 -# include/asm-arm/arch-pxa/mfp-pxa300.h | 574 ++++++++++++++++++++++++++++++ -# include/asm-arm/arch-pxa/mfp-pxa320.h | 446 ++++++++++++++++++++++++ -# include/asm-arm/arch-pxa/mfp.h | 576 +++++++++++++++++++++++++++++++ -# include/asm-arm/arch-pxa/pxa-regs.h | 2 -# include/asm-arm/arch-pxa/pxa3xx-regs.h | 75 ++++ -# include/asm-arm/arch-pxa/timex.h | 2 -# include/asm-arm/arch-pxa/zylonite.h | 35 + -# 45 files changed, 3825 insertions(+), 452 deletions(-) -# create mode 100644 arch/arm/mach-pxa/mfp.c -# create mode 100644 arch/arm/mach-pxa/pxa300.c -# create mode 100644 arch/arm/mach-pxa/pxa320.c -# create mode 100644 arch/arm/mach-pxa/pxa3xx.c -# create mode 100644 arch/arm/mach-pxa/zylonite.c -# create mode 100644 arch/arm/mach-pxa/zylonite_pxa300.c -# create mode 100644 arch/arm/mach-pxa/zylonite_pxa320.c -# create mode 100644 include/asm-arm/arch-pxa/mfp-pxa300.h -# create mode 100644 include/asm-arm/arch-pxa/mfp-pxa320.h -# create mode 100644 include/asm-arm/arch-pxa/mfp.h -# create mode 100644 include/asm-arm/arch-pxa/pxa3xx-regs.h -# create mode 100644 include/asm-arm/arch-pxa/zylonite.h -# -# Author: Russell King (Sat Sep 1 21:27:18 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:17 BST 2007) -# -# [NET] smc91x: fix PXA DMA support code -# -# The PXA DMA support code for smc91x doesn't pass a struct device to -# the dma_*map_single() functions, which leads to an oops in the dma -# bounce code. We have a struct device which was used to probe the -# SMC chip. Use it. -# -# (This patch is slightly larger because it requires struct smc_local -# to move into the header file.) -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Sat Sep 1 21:25:09 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:12 BST 2007) -# -# [SERIAL] Fix console initialisation ordering -# -# Ensure pm callback is called upon initialisation to place port in -# correct power saving state. Ensure console is initialised prior -# to deciding whether to power down the port. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Wed Sep 19 09:21:51 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:07 BST 2007) -# -# [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Sat Sep 1 21:28:55 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:03 BST 2007) -# -# [ARM] lubbock, mainstone: only initialise if running on that platform -# -# Signed-off-by: Russell King -# -# -# Author: eric miao (Wed Aug 29 10:22:17 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:01 BST 2007) -# -# [ARM] 4560/1: pxa: move processor specific set_wake logic out of irq.c -# -# a function pxa_init_irq_set_wake() was introduced, so that -# processor specific code could install their own version -# -# code setting PFER and PRER registers within pxa_gpio_irq_type -# are removed, and the edge configuration is postponed to the -# (*set_wake) and copies the GRER and GFER register, which will -# always be set up correctly by pxa_gpio_irq_type() -# -# Signed-off-by: eric miao -# Signed-off-by: Russell King -# -# -# Author: eric miao (Wed Aug 29 10:18:47 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:59 BST 2007) -# -# [ARM] 4559/1: pxa: make PXA_LAST_GPIO a run-time variable -# -# This definition produces processor specific code in generic function -# pxa_gpio_mode(), thus creating inconsistencies for support of pxa25x -# and pxa27x in a single zImage. -# -# As David Brownell suggests, make it a run-time variable and initialize -# at run-time according to the number of GPIOs on the processor. For now -# the initialization happens in pxa_init_irq_gpio(), since there is -# already a parameter for that, besides, this is and MUST be earlier -# than any subsequent calls to pxa_gpio_mode(). -# -# Signed-off-by: eric miao -# Signed-off-by: Russell King -# -# -# Author: eric miao (Wed Aug 29 10:15:41 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:57 BST 2007) -# -# [ARM] 4558/1: pxa: remove MACH_TYPE_LUBBOCK assignment and leave it to boot loader -# -# since both u-boot and blob support passing MACH_TYPE_LUBBOCK to the -# kernel, it should be quite safe to remove this -# -# Signed-off-by: eric miao -# Acked-by: Nicolas Pitre -# Signed-off-by: Russell King -# -# -# Author: eric miao (Wed Sep 12 03:13:17 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:55 BST 2007) -# -# [ARM] pxa: add PXA3 cpu_is_xxx() macros -# -# Extracted from patch by Eric Miao, this adds the cpu_is_xxx() macros -# for identifying PXA3 SoCs. -# -# Signed-off-by: eric miao -# Signed-off-by: Russell King -# -# -# Author: Russell King (Wed Sep 19 09:38:32 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:51 BST 2007) -# -# [ARM] pxa: Make CPU_XSCALE depend on PXA25x or PXA27x -# -# PXA3 SoCs are supported by the Xscale3 CPU code rather than the -# Xscale CPU code. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Wed Sep 19 09:33:55 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:48 BST 2007) -# -# [ARM] pxa: mark pxa_set_cken deprecated -# -# Allow the generic clock support code to fiddle with the CKEN register -# and mark pxa_set_cken() deprecated. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:34:37 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:43 BST 2007) -# -# [ARM] pxa: remove get_lcdclk_frequency_10khz() -# -# get_lcdclk_frequency_10khz() is now redundant, remove it. Hide -# pxa27x_get_lcdclk_frequency_10khz() from public view. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Sun Sep 2 17:09:23 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:39 BST 2007) -# -# [ARM] pxa: update pxa irda driver to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Sun Sep 2 17:08:42 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:36 BST 2007) -# -# [ARM] pxa: Make STUART and FICP clocks available -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:33:35 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:34 BST 2007) -# -# [ARM] pxa: update PXA UDC driver to use clk support -# -# Note: this produces a WARN() dump. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:28:15 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:31 BST 2007) -# -# [ARM] pxa: update pxa serial driver to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:20:03 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:27 BST 2007) -# -# [ARM] pxa: update PXA MMC interface driver to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:19:39 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:23 BST 2007) -# -# [ARM] pxa: update pxa27x keypad driver to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:19:10 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:19 BST 2007) -# -# [ARM] pxa: update pxa i2c driver to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:18:42 BST 2007) -# Committer: Russell King (Sun Sep 23 14:16:50 BST 2007) -# -# [ARM] pxa: update pxafb to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:18:02 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:09 BST 2007) -# -# [ARM] pxa: introduce clk support for PXA SoC clocks -# -# Signed-off-by: Russell King -# -# create mode 100644 arch/arm/mach-pxa/clock.h -# -# Author: Russell King (Mon Aug 20 10:09:18 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:09 BST 2007) -# -# [ARM] pxa: make pxa27x devices globally visible -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:07:44 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:08 BST 2007) -# -# [ARM] pxa: fix naming of memory/lcd/core clock functions -# -# Rename pxa25x and pxa27x memory/lcd/core clock functions, and -# select the correct version at run time. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 09:47:41 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:08 BST 2007) -# -# [ARM] pxa: convert PXA serial drivers to use platform resources -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Sat Sep 1 21:12:50 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:07 BST 2007) -# -# [ARM] pxa: make pxa timer initialisation select clock rate at runtime -# -# Rather than using the compile-time constant CLOCK_TICK_RATE, select -# the clock tick rate at run time. We organise the selection so that -# PXA3 automatically falls out with the right tick rate. -# -# Signed-off-by: Russell King -# -# -# Author: Nicolas Pitre (Fri Aug 17 16:55:22 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:05 BST 2007) -# -# [ARM] 4550/1: sched_clock on PXA should cope with run time clock rate selection -# -# The previous implementation was relying on compile time optimizations -# based on a constant clock rate. However, support for different PXA -# flavors in the same kernel binary requires that the clock be selected at -# run time, so here it is. -# -# Let's move this code to a more appropriate location while at it. -# -# Signed-off-by: Nicolas Pitre -# Signed-off-by: Russell King -# -# ---- linux-2.6.23.orig/arch/arm/Kconfig -+++ linux-2.6.23/arch/arm/Kconfig -@@ -336,14 +336,14 @@ - This enables support for Philips PNX4008 mobile platform. - - config ARCH_PXA -- bool "PXA2xx-based" -+ bool "PXA2xx/PXA3xx-based" - depends on MMU - select ARCH_MTD_XIP - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help -- Support for Intel's PXA2XX processor line. -+ Support for Intel/Marvell's PXA2xx/PXA3xx processor line. - - config ARCH_RPC - bool "RiscPC" -@@ -486,7 +486,7 @@ - config IWMMXT - bool "Enable iWMMXt support" - depends on CPU_XSCALE || CPU_XSC3 -- default y if PXA27x -+ default y if PXA27x || PXA3xx - help - Enable support for iWMMXt context switching at run time if - running on a CPU that supports it. ---- linux-2.6.23.orig/arch/arm/boot/compressed/head-xscale.S -+++ linux-2.6.23/arch/arm/boot/compressed/head-xscale.S -@@ -33,10 +33,6 @@ - bic r0, r0, #0x1000 @ clear Icache - mcr p15, 0, r0, c1, c0, 0 - --#ifdef CONFIG_ARCH_LUBBOCK -- mov r7, #MACH_TYPE_LUBBOCK --#endif -- - #ifdef CONFIG_ARCH_COTULLA_IDP - mov r7, #MACH_TYPE_COTULLA_IDP - #endif ---- linux-2.6.23.orig/arch/arm/mach-pxa/Kconfig -+++ linux-2.6.23/arch/arm/mach-pxa/Kconfig -@@ -1,6 +1,24 @@ - if ARCH_PXA - --menu "Intel PXA2xx Implementations" -+menu "Intel PXA2xx/PXA3xx Implementations" -+ -+if PXA3xx -+ -+menu "Supported PXA3xx Processor Variants" -+ -+config CPU_PXA300 -+ bool "PXA300 (codename Monahans-L)" -+ -+config CPU_PXA310 -+ bool "PXA310 (codename Monahans-LV)" -+ select CPU_PXA300 -+ -+config CPU_PXA320 -+ bool "PXA320 (codename Monahans-P)" -+ -+endmenu -+ -+endif - - choice - prompt "Select target board" -@@ -41,6 +59,11 @@ - bool "CompuLab EM-x270 platform" - select PXA27x - -+ -+config MACH_ZYLONITE -+ bool "PXA3xx Development Platform" -+ select PXA3xx -+ - config MACH_HX2750 - bool "HP iPAQ hx2750" - select PXA27x -@@ -228,6 +251,11 @@ - help - Select code specific to PXA27x variants - -+config PXA3xx -+ bool -+ help -+ Select code specific to PXA3xx variants -+ - config PXA_SHARP_C7xx - bool - select PXA_SSP ---- linux-2.6.23.orig/arch/arm/mach-pxa/Makefile -+++ linux-2.6.23/arch/arm/mach-pxa/Makefile -@@ -6,6 +6,9 @@ - obj-y += clock.o generic.o irq.o dma.o time.o - obj-$(CONFIG_PXA25x) += pxa25x.o - obj-$(CONFIG_PXA27x) += pxa27x.o -+obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o -+obj-$(CONFIG_CPU_PXA300) += pxa300.o -+obj-$(CONFIG_CPU_PXA320) += pxa320.o - - # Specific board support - obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o -@@ -19,6 +22,12 @@ - obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o sharpsl_pm.o poodle_pm.o - obj-$(CONFIG_MACH_TOSA) += tosa.o - obj-$(CONFIG_MACH_EM_X270) += em-x270.o -+ifeq ($(CONFIG_MACH_ZYLONITE),y) -+ obj-y += zylonite.o -+ obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o -+ obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o -+endif -+ - obj-$(CONFIG_MACH_HX2750) += hx2750.o hx2750_test.o - obj-$(CONFIG_MACH_HTCUNIVERSAL) += htcuniversal/ - ---- linux-2.6.23.orig/arch/arm/mach-pxa/clock.c -+++ linux-2.6.23/arch/arm/mach-pxa/clock.c -@@ -9,19 +9,15 @@ - #include - #include - #include -+#include -+#include - - #include - #include - --struct clk { -- struct list_head node; -- unsigned long rate; -- struct module *owner; -- const char *name; -- unsigned int enabled; -- void (*enable)(void); -- void (*disable)(void); --}; -+#include "devices.h" -+#include "generic.h" -+#include "clock.h" - - static LIST_HEAD(clocks); - static DEFINE_MUTEX(clocks_mutex); -@@ -33,7 +29,8 @@ - - mutex_lock(&clocks_mutex); - list_for_each_entry(p, &clocks, node) { -- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { -+ if (strcmp(id, p->name) == 0 && -+ (p->dev == NULL || p->dev == dev)) { - clk = p; - break; - } -@@ -46,7 +43,6 @@ - - void clk_put(struct clk *clk) - { -- module_put(clk->owner); - } - EXPORT_SYMBOL(clk_put); - -@@ -56,8 +52,12 @@ - - spin_lock_irqsave(&clocks_lock, flags); - if (clk->enabled++ == 0) -- clk->enable(); -+ clk->ops->enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); -+ -+ if (clk->delay) -+ udelay(clk->delay); -+ - return 0; - } - EXPORT_SYMBOL(clk_enable); -@@ -70,54 +70,75 @@ - - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->enabled == 0) -- clk->disable(); -+ clk->ops->disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - } - EXPORT_SYMBOL(clk_disable); - - unsigned long clk_get_rate(struct clk *clk) - { -- return clk->rate; -+ unsigned long rate; -+ -+ rate = clk->rate; -+ if (clk->ops->getrate) -+ rate = clk->ops->getrate(clk); -+ -+ return rate; - } - EXPORT_SYMBOL(clk_get_rate); - - --static void clk_gpio27_enable(void) -+static void clk_gpio27_enable(struct clk *clk) - { - pxa_gpio_mode(GPIO11_3_6MHz_MD); - } - --static void clk_gpio27_disable(void) -+static void clk_gpio27_disable(struct clk *clk) - { - } - --static struct clk clk_gpio27 = { -- .name = "GPIO27_CLK", -- .rate = 3686400, -+static const struct clkops clk_gpio27_ops = { - .enable = clk_gpio27_enable, - .disable = clk_gpio27_disable, - }; - --int clk_register(struct clk *clk) -+ -+void clk_cken_enable(struct clk *clk) - { -- mutex_lock(&clocks_mutex); -- list_add(&clk->node, &clocks); -- mutex_unlock(&clocks_mutex); -- return 0; -+ CKEN |= 1 << clk->cken; - } --EXPORT_SYMBOL(clk_register); - --void clk_unregister(struct clk *clk) -+void clk_cken_disable(struct clk *clk) - { -+ CKEN &= ~(1 << clk->cken); -+} -+ -+const struct clkops clk_cken_ops = { -+ .enable = clk_cken_enable, -+ .disable = clk_cken_disable, -+}; -+ -+static struct clk common_clks[] = { -+ { -+ .name = "GPIO27_CLK", -+ .ops = &clk_gpio27_ops, -+ .rate = 3686400, -+ }, -+}; -+ -+void clks_register(struct clk *clks, size_t num) -+{ -+ int i; -+ - mutex_lock(&clocks_mutex); -- list_del(&clk->node); -+ for (i = 0; i < num; i++) -+ list_add(&clks[i].node, &clocks); - mutex_unlock(&clocks_mutex); - } --EXPORT_SYMBOL(clk_unregister); - - static int __init clk_init(void) - { -- clk_register(&clk_gpio27); -+ clks_register(common_clks, ARRAY_SIZE(common_clks)); - return 0; - } - arch_initcall(clk_init); ---- /dev/null -+++ linux-2.6.23/arch/arm/mach-pxa/clock.h -@@ -0,0 +1,43 @@ -+struct clk; -+ -+struct clkops { -+ void (*enable)(struct clk *); -+ void (*disable)(struct clk *); -+ unsigned long (*getrate)(struct clk *); -+}; -+ -+struct clk { -+ struct list_head node; -+ const char *name; -+ struct device *dev; -+ const struct clkops *ops; -+ unsigned long rate; -+ unsigned int cken; -+ unsigned int delay; -+ unsigned int enabled; -+}; -+ -+#define INIT_CKEN(_name, _cken, _rate, _delay, _dev) \ -+ { \ -+ .name = _name, \ -+ .dev = _dev, \ -+ .ops = &clk_cken_ops, \ -+ .rate = _rate, \ -+ .cken = CKEN_##_cken, \ -+ .delay = _delay, \ -+ } -+ -+#define INIT_CK(_name, _cken, _ops, _dev) \ -+ { \ -+ .name = _name, \ -+ .dev = _dev, \ -+ .ops = _ops, \ -+ .cken = CKEN_##_cken, \ -+ } -+ -+extern const struct clkops clk_cken_ops; -+ -+void clk_cken_enable(struct clk *clk); -+void clk_cken_disable(struct clk *clk); -+ -+void clks_register(struct clk *clks, size_t num); ---- linux-2.6.23.orig/arch/arm/mach-pxa/devices.h -+++ linux-2.6.23/arch/arm/mach-pxa/devices.h -@@ -9,3 +9,6 @@ - extern struct platform_device pxa_device_i2s; - extern struct platform_device pxa_device_ficp; - extern struct platform_device pxa_device_rtc; -+ -+extern struct platform_device pxa27x_device_i2c_power; -+extern struct platform_device pxa27x_device_ohci; ---- linux-2.6.23.orig/arch/arm/mach-pxa/generic.c -+++ linux-2.6.23/arch/arm/mach-pxa/generic.c -@@ -25,10 +25,6 @@ - #include - #include - --#include --#include --#include -- - #include - #include - #include -@@ -48,66 +44,39 @@ - #include "generic.h" - - /* -- * This is the PXA2xx sched_clock implementation. This has a resolution -- * of at least 308ns and a maximum value that depends on the value of -- * CLOCK_TICK_RATE. -- * -- * The return value is guaranteed to be monotonic in that range as -- * long as there is always less than 582 seconds between successive -- * calls to this function. -+ * Get the clock frequency as reflected by CCCR and the turbo flag. -+ * We assume these values have been applied via a fcs. -+ * If info is not 0 we also display the current settings. - */ --unsigned long long sched_clock(void) -+unsigned int get_clk_frequency_khz(int info) - { -- unsigned long long v = cnt32_to_63(OSCR); -- /* Note: top bit ov v needs cleared unless multiplier is even. */ -- --#if CLOCK_TICK_RATE == 3686400 -- /* 1E9 / 3686400 => 78125 / 288, max value = 32025597s (370 days). */ -- /* The <<1 is used to get rid of tick.hi top bit */ -- v *= 78125<<1; -- do_div(v, 288<<1); --#elif CLOCK_TICK_RATE == 3250000 -- /* 1E9 / 3250000 => 4000 / 13, max value = 709490156s (8211 days) */ -- v *= 4000; -- do_div(v, 13); --#elif CLOCK_TICK_RATE == 3249600 -- /* 1E9 / 3249600 => 625000 / 2031, max value = 4541295s (52 days) */ -- v *= 625000; -- do_div(v, 2031); --#else --#warning "consider fixing sched_clock for your value of CLOCK_TICK_RATE" -- /* -- * 96-bit math to perform tick * NSEC_PER_SEC / CLOCK_TICK_RATE for -- * any value of CLOCK_TICK_RATE. Max value is in the 80 thousand -- * years range and truncation to unsigned long long limits it to -- * sched_clock's max range of ~584 years. This is nice but with -- * higher computation cost. -- */ -- { -- union { -- unsigned long long val; -- struct { unsigned long lo, hi; }; -- } x; -- unsigned long long y; -- -- x.val = v; -- x.hi &= 0x7fffffff; -- y = (unsigned long long)x.lo * NSEC_PER_SEC; -- x.lo = y; -- y = (y >> 32) + (unsigned long long)x.hi * NSEC_PER_SEC; -- x.hi = do_div(y, CLOCK_TICK_RATE); -- do_div(x.val, CLOCK_TICK_RATE); -- x.hi += y; -- v = x.val; -- } --#endif -+ if (cpu_is_pxa21x() || cpu_is_pxa25x()) -+ return pxa25x_get_clk_frequency_khz(info); -+ else if (cpu_is_pxa27x()) -+ return pxa27x_get_clk_frequency_khz(info); -+ else -+ return pxa3xx_get_clk_frequency_khz(info); -+} -+EXPORT_SYMBOL(get_clk_frequency_khz); - -- return v; -+/* -+ * Return the current memory clock frequency in units of 10kHz -+ */ -+unsigned int get_memclk_frequency_10khz(void) -+{ -+ if (cpu_is_pxa21x() || cpu_is_pxa25x()) -+ return pxa25x_get_memclk_frequency_10khz(); -+ else if (cpu_is_pxa27x()) -+ return pxa27x_get_memclk_frequency_10khz(); -+ else -+ return pxa3xx_get_memclk_frequency_10khz(); - } -+EXPORT_SYMBOL(get_memclk_frequency_10khz); - - /* - * Handy function to set GPIO alternate functions - */ -+int pxa_last_gpio; - - int pxa_gpio_mode(int gpio_mode) - { -@@ -116,7 +85,7 @@ - int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; - int gafr; - -- if (gpio > PXA_LAST_GPIO) -+ if (gpio > pxa_last_gpio) - return -EINVAL; - - local_irq_save(flags); -@@ -160,7 +129,7 @@ - /* - * Routine to safely enable or disable a clock in the CKEN - */ --void pxa_set_cken(int clock, int enable) -+void __pxa_set_cken(int clock, int enable) - { - unsigned long flags; - local_irq_save(flags); -@@ -173,7 +142,7 @@ - local_irq_restore(flags); - } - --EXPORT_SYMBOL(pxa_set_cken); -+EXPORT_SYMBOL(__pxa_set_cken); - - /* - * Intel PXA2xx internal register mapping. -@@ -330,21 +299,80 @@ - pxa_device_fb.dev.parent = parent_dev; - } - -+static struct resource pxa_resource_ffuart[] = { -+ { -+ .start = __PREG(FFUART), -+ .end = __PREG(FFUART) + 35, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_FFUART, -+ .end = IRQ_FFUART, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ - struct platform_device pxa_device_ffuart= { - .name = "pxa2xx-uart", - .id = 0, -+ .resource = pxa_resource_ffuart, -+ .num_resources = ARRAY_SIZE(pxa_resource_ffuart), -+}; -+ -+static struct resource pxa_resource_btuart[] = { -+ { -+ .start = __PREG(BTUART), -+ .end = __PREG(BTUART) + 35, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_BTUART, -+ .end = IRQ_BTUART, -+ .flags = IORESOURCE_IRQ, -+ } - }; -+ - struct platform_device pxa_device_btuart = { - .name = "pxa2xx-uart", - .id = 1, -+ .resource = pxa_resource_btuart, -+ .num_resources = ARRAY_SIZE(pxa_resource_btuart), - }; -+ -+static struct resource pxa_resource_stuart[] = { -+ { -+ .start = __PREG(STUART), -+ .end = __PREG(STUART) + 35, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_STUART, -+ .end = IRQ_STUART, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ - struct platform_device pxa_device_stuart = { - .name = "pxa2xx-uart", - .id = 2, -+ .resource = pxa_resource_stuart, -+ .num_resources = ARRAY_SIZE(pxa_resource_stuart), -+}; -+ -+static struct resource pxa_resource_hwuart[] = { -+ { -+ .start = __PREG(HWUART), -+ .end = __PREG(HWUART) + 47, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_HWUART, -+ .end = IRQ_HWUART, -+ .flags = IORESOURCE_IRQ, -+ } - }; -+ - struct platform_device pxa_device_hwuart = { - .name = "pxa2xx-uart", - .id = 3, -+ .resource = pxa_resource_hwuart, -+ .num_resources = ARRAY_SIZE(pxa_resource_hwuart), - }; - - void __init pxa_set_ffuart_info(struct platform_pxa_serial_funcs *info) ---- linux-2.6.23.orig/arch/arm/mach-pxa/generic.h -+++ linux-2.6.23/arch/arm/mach-pxa/generic.h -@@ -15,14 +15,40 @@ - extern void __init pxa_init_irq_low(void); - extern void __init pxa_init_irq_high(void); - extern void __init pxa_init_irq_gpio(int gpio_nr); -+extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)); - extern void __init pxa25x_init_irq(void); - extern void __init pxa27x_init_irq(void); -+extern void __init pxa3xx_init_irq(void); - extern void __init pxa_map_io(void); - - extern unsigned int get_clk_frequency_khz(int info); -+extern int pxa_last_gpio; - - #define SET_BANK(__nr,__start,__size) \ - mi->bank[__nr].start = (__start), \ - mi->bank[__nr].size = (__size), \ - mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27) - -+#ifdef CONFIG_PXA25x -+extern unsigned pxa25x_get_clk_frequency_khz(int); -+extern unsigned pxa25x_get_memclk_frequency_10khz(void); -+#else -+#define pxa25x_get_clk_frequency_khz(x) (0) -+#define pxa25x_get_memclk_frequency_10khz() (0) -+#endif -+ -+#ifdef CONFIG_PXA27x -+extern unsigned pxa27x_get_clk_frequency_khz(int); -+extern unsigned pxa27x_get_memclk_frequency_10khz(void); -+#else -+#define pxa27x_get_clk_frequency_khz(x) (0) -+#define pxa27x_get_memclk_frequency_10khz() (0) -+#endif -+ -+#ifdef CONFIG_PXA3xx -+extern unsigned pxa3xx_get_clk_frequency_khz(int); -+extern unsigned pxa3xx_get_memclk_frequency_10khz(void); -+#else -+#define pxa3xx_get_clk_frequency_khz(x) (0) -+#define pxa3xx_get_memclk_frequency_10khz() (0) -+#endif ---- linux-2.6.23.orig/arch/arm/mach-pxa/irq.c -+++ linux-2.6.23/arch/arm/mach-pxa/irq.c -@@ -38,33 +38,11 @@ - ICMR |= (1 << irq); - } - --static int pxa_set_wake(unsigned int irq, unsigned int on) --{ -- u32 mask; -- -- switch (irq) { -- case IRQ_RTCAlrm: -- mask = PWER_RTC; -- break; --#ifdef CONFIG_PXA27x -- /* REVISIT can handle USBH1, USBH2, USB, MSL, USIM, ... */ --#endif -- default: -- return -EINVAL; -- } -- if (on) -- PWER |= mask; -- else -- PWER &= ~mask; -- return 0; --} -- - static struct irq_chip pxa_internal_chip_low = { - .name = "SC", - .ack = pxa_mask_low_irq, - .mask = pxa_mask_low_irq, - .unmask = pxa_unmask_low_irq, -- .set_wake = pxa_set_wake, - }; - - void __init pxa_init_irq_low(void) -@@ -87,7 +65,7 @@ - } - } - --#ifdef CONFIG_PXA27x -+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - - /* - * This is for the second set of internal IRQs as found on the PXA27x. -@@ -125,26 +103,6 @@ - } - #endif - --/* Note that if an input/irq line ever gets changed to an output during -- * suspend, the relevant PWER, PRER, and PFER bits should be cleared. -- */ --#ifdef CONFIG_PXA27x -- --/* PXA27x: Various gpios can issue wakeup events. This logic only -- * handles the simple cases, not the WEMUX2 and WEMUX3 options -- */ --#define PXA27x_GPIO_NOWAKE_MASK \ -- ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)) --#define WAKEMASK(gpio) \ -- (((gpio) <= 15) \ -- ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \ -- : ((gpio == 35) ? (1 << 24) : 0)) --#else -- --/* pxa 210, 250, 255, 26x: gpios 0..15 can issue wakeups */ --#define WAKEMASK(gpio) (((gpio) <= 15) ? (1 << (gpio)) : 0) --#endif -- - /* - * PXA GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. -@@ -158,11 +116,9 @@ - static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) - { - int gpio, idx; -- u32 mask; - - gpio = IRQ_TO_GPIO(irq); - idx = gpio >> 5; -- mask = WAKEMASK(gpio); - - if (type == IRQT_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or -@@ -182,19 +138,15 @@ - if (type & __IRQT_RISEDGE) { - /* printk("rising "); */ - __set_bit (gpio, GPIO_IRQ_rising_edge); -- PRER |= mask; - } else { - __clear_bit (gpio, GPIO_IRQ_rising_edge); -- PRER &= ~mask; - } - - if (type & __IRQT_FALEDGE) { - /* printk("falling "); */ - __set_bit (gpio, GPIO_IRQ_falling_edge); -- PFER |= mask; - } else { - __clear_bit (gpio, GPIO_IRQ_falling_edge); -- PFER &= ~mask; - } - - /* printk("edges\n"); */ -@@ -213,29 +165,12 @@ - GEDR0 = (1 << (irq - IRQ_GPIO0)); - } - --static int pxa_set_gpio_wake(unsigned int irq, unsigned int on) --{ -- int gpio = IRQ_TO_GPIO(irq); -- u32 mask = WAKEMASK(gpio); -- -- if (!mask) -- return -EINVAL; -- -- if (on) -- PWER |= mask; -- else -- PWER &= ~mask; -- return 0; --} -- -- - static struct irq_chip pxa_low_gpio_chip = { - .name = "GPIO-l", - .ack = pxa_ack_low_gpio, - .mask = pxa_mask_low_irq, - .unmask = pxa_unmask_low_irq, - .set_type = pxa_gpio_irq_type, -- .set_wake = pxa_set_gpio_wake, - }; - - /* -@@ -342,13 +277,14 @@ - .mask = pxa_mask_muxed_gpio, - .unmask = pxa_unmask_muxed_gpio, - .set_type = pxa_gpio_irq_type, -- .set_wake = pxa_set_gpio_wake, - }; - - void __init pxa_init_irq_gpio(int gpio_nr) - { - int irq, i; - -+ pxa_last_gpio = gpio_nr - 1; -+ - /* clear all GPIO edge detects */ - for (i = 0; i < gpio_nr; i += 32) { - GFER(i) = 0; -@@ -375,3 +311,13 @@ - set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low); - set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); - } -+ -+void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)) -+{ -+ pxa_internal_chip_low.set_wake = set_wake; -+#ifdef CONFIG_PXA27x -+ pxa_internal_chip_high.set_wake = set_wake; -+#endif -+ pxa_low_gpio_chip.set_wake = set_wake; -+ pxa_muxed_gpio_chip.set_wake = set_wake; -+} ---- /dev/null -+++ linux-2.6.23/arch/arm/mach-pxa/mfp.c -@@ -0,0 +1,235 @@ -+/* -+ * linux/arch/arm/mach-pxa/mfp.c -+ * -+ * PXA3xx Multi-Function Pin Support -+ * -+ * Copyright (C) 2007 Marvell Internation Ltd. -+ * -+ * 2007-08-21: eric miao -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+/* mfp_spin_lock is used to ensure that MFP register configuration -+ * (most likely a read-modify-write operation) is atomic, and that -+ * mfp_table[] is consistent -+ */ -+static DEFINE_SPINLOCK(mfp_spin_lock); -+ -+static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE); -+static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX]; -+ -+#define mfpr_readl(off) \ -+ __raw_readl(mfpr_mmio_base + (off)) -+ -+#define mfpr_writel(off, val) \ -+ __raw_writel(val, mfpr_mmio_base + (off)) -+ -+/* -+ * perform a read-back of any MFPR register to make sure the -+ * previous writings are finished -+ */ -+#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) -+ -+static inline void __mfp_config(int pin, unsigned long val) -+{ -+ unsigned long off = mfp_table[pin].mfpr_off; -+ -+ mfp_table[pin].mfpr_val = val; -+ mfpr_writel(off, val); -+} -+ -+void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num) -+{ -+ int i, pin; -+ unsigned long val, flags; -+ mfp_cfg_t *mfp_cfg = mfp_cfgs; -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ for (i = 0; i < num; i++, mfp_cfg++) { -+ pin = MFP_CFG_PIN(*mfp_cfg); -+ val = MFP_CFG_VAL(*mfp_cfg); -+ -+ BUG_ON(pin >= MFP_PIN_MAX); -+ -+ __mfp_config(pin, val); -+ } -+ -+ mfpr_sync(); -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+unsigned long pxa3xx_mfp_read(int mfp) -+{ -+ unsigned long val, flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ val = mfpr_readl(mfp_table[mfp].mfpr_off); -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+ -+ return val; -+} -+ -+void pxa3xx_mfp_write(int mfp, unsigned long val) -+{ -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ mfpr_writel(mfp_table[mfp].mfpr_off, val); -+ mfpr_sync(); -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void pxa3xx_mfp_set_afds(int mfp, int af, int ds) -+{ -+ uint32_t mfpr_off, mfpr_val; -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ mfpr_off = mfp_table[mfp].mfpr_off; -+ -+ mfpr_val = mfpr_readl(mfpr_off); -+ mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK); -+ mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) | -+ ((ds & 0x7) << MFPR_DRV_OFFSET)); -+ -+ mfpr_writel(mfpr_off, mfpr_val); -+ mfpr_sync(); -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void pxa3xx_mfp_set_rdh(int mfp, int rdh) -+{ -+ uint32_t mfpr_off, mfpr_val; -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ mfpr_off = mfp_table[mfp].mfpr_off; -+ -+ mfpr_val = mfpr_readl(mfpr_off); -+ mfpr_val &= ~MFPR_RDH_MASK; -+ -+ if (likely(rdh)) -+ mfpr_val |= (1u << MFPR_SS_OFFSET); -+ -+ mfpr_writel(mfpr_off, mfpr_val); -+ mfpr_sync(); -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void pxa3xx_mfp_set_lpm(int mfp, int lpm) -+{ -+ uint32_t mfpr_off, mfpr_val; -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ mfpr_off = mfp_table[mfp].mfpr_off; -+ mfpr_val = mfpr_readl(mfpr_off); -+ mfpr_val &= ~MFPR_LPM_MASK; -+ -+ if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET; -+ if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET; -+ if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET; -+ if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET; -+ if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET; -+ -+ mfpr_writel(mfpr_off, mfpr_val); -+ mfpr_sync(); -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void pxa3xx_mfp_set_pull(int mfp, int pull) -+{ -+ uint32_t mfpr_off, mfpr_val; -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ mfpr_off = mfp_table[mfp].mfpr_off; -+ mfpr_val = mfpr_readl(mfpr_off); -+ mfpr_val &= ~MFPR_PULL_MASK; -+ mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET); -+ -+ mfpr_writel(mfpr_off, mfpr_val); -+ mfpr_sync(); -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void pxa3xx_mfp_set_edge(int mfp, int edge) -+{ -+ uint32_t mfpr_off, mfpr_val; -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ mfpr_off = mfp_table[mfp].mfpr_off; -+ mfpr_val = mfpr_readl(mfpr_off); -+ -+ mfpr_val &= ~MFPR_EDGE_MASK; -+ mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET; -+ mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET; -+ -+ mfpr_writel(mfpr_off, mfpr_val); -+ mfpr_sync(); -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map) -+{ -+ struct pxa3xx_mfp_addr_map *p; -+ unsigned long offset, flags; -+ int i; -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ for (p = map; p->start != MFP_PIN_INVALID; p++) { -+ offset = p->offset; -+ i = p->start; -+ -+ do { -+ mfp_table[i].mfpr_off = offset; -+ mfp_table[i].mfpr_val = 0; -+ offset += 4; i++; -+ } while ((i <= p->end) && (p->end != -1)); -+ } -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void __init pxa3xx_init_mfp(void) -+{ -+ memset(mfp_table, 0, sizeof(mfp_table)); -+} ---- linux-2.6.23.orig/arch/arm/mach-pxa/pxa25x.c -+++ linux-2.6.23/arch/arm/mach-pxa/pxa25x.c -@@ -30,6 +30,7 @@ - - #include "generic.h" - #include "devices.h" -+#include "clock.h" - - /* - * Various clock factors driven by the CCCR register. -@@ -53,7 +54,7 @@ - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ --unsigned int get_clk_frequency_khz(int info) -+unsigned int pxa25x_get_clk_frequency_khz(int info) - { - unsigned long cccr, turbo; - unsigned int l, L, m, M, n2, N; -@@ -86,27 +87,48 @@ - return (turbo & 1) ? (N/1000) : (M/1000); - } - --EXPORT_SYMBOL(get_clk_frequency_khz); -- - /* - * Return the current memory clock frequency in units of 10kHz - */ --unsigned int get_memclk_frequency_10khz(void) -+unsigned int pxa25x_get_memclk_frequency_10khz(void) - { - return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK / 10000; - } - --EXPORT_SYMBOL(get_memclk_frequency_10khz); -- --/* -- * Return the current LCD clock frequency in units of 10kHz -- */ --unsigned int get_lcdclk_frequency_10khz(void) -+static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk) - { -- return get_memclk_frequency_10khz(); -+ return pxa25x_get_memclk_frequency_10khz() * 10000; - } - --EXPORT_SYMBOL(get_lcdclk_frequency_10khz); -+static const struct clkops clk_pxa25x_lcd_ops = { -+ .enable = clk_cken_enable, -+ .disable = clk_cken_disable, -+ .getrate = clk_pxa25x_lcd_getrate, -+}; -+ -+/* -+ * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz) -+ * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz -+ * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly) -+ */ -+static struct clk pxa25x_clks[] = { -+ INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev), -+ INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev), -+ INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), -+ INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), -+ INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL), -+ INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev), -+ INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), -+ INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev), -+ /* -+ INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), -+ INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), -+ INIT_CKEN("SSPCLK", SSP, 3686400, 0, NULL), -+ INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL), -+ INIT_CKEN("NSSPCLK", NSSP, 3686400, 0, NULL), -+ */ -+ INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), -+}; - - #ifdef CONFIG_PM - -@@ -207,10 +229,52 @@ - } - #endif - -+/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm -+ */ -+ -+static int pxa25x_set_wake(unsigned int irq, unsigned int on) -+{ -+ int gpio = IRQ_TO_GPIO(irq); -+ uint32_t gpio_bit, mask = 0; -+ -+ if (gpio >= 0 && gpio <= 15) { -+ gpio_bit = GPIO_bit(gpio); -+ mask = gpio_bit; -+ if (on) { -+ if (GRER(gpio) | gpio_bit) -+ PRER |= gpio_bit; -+ else -+ PRER &= ~gpio_bit; -+ -+ if (GFER(gpio) | gpio_bit) -+ PFER |= gpio_bit; -+ else -+ PFER &= ~gpio_bit; -+ } -+ goto set_pwer; -+ } -+ -+ if (irq == IRQ_RTCAlrm) { -+ mask = PWER_RTC; -+ goto set_pwer; -+ } -+ -+ return -EINVAL; -+ -+set_pwer: -+ if (on) -+ PWER |= mask; -+ else -+ PWER &=~mask; -+ -+ return 0; -+} -+ - void __init pxa25x_init_irq(void) - { - pxa_init_irq_low(); - pxa_init_irq_gpio(85); -+ pxa_init_irq_set_wake(pxa25x_set_wake); - } - - static struct platform_device *pxa25x_devices[] __initdata = { -@@ -231,6 +295,8 @@ - int ret = 0; - - if (cpu_is_pxa21x() || cpu_is_pxa25x()) { -+ clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks)); -+ - if ((ret = pxa_init_dma(16))) - return ret; - #ifdef CONFIG_PM ---- linux-2.6.23.orig/arch/arm/mach-pxa/pxa27x.c -+++ linux-2.6.23/arch/arm/mach-pxa/pxa27x.c -@@ -27,6 +27,7 @@ - - #include "generic.h" - #include "devices.h" -+#include "clock.h" - - /* Crystal clock: 13MHz */ - #define BASE_CLK 13000000 -@@ -36,7 +37,7 @@ - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ --unsigned int get_clk_frequency_khz( int info) -+unsigned int pxa27x_get_clk_frequency_khz(int info) - { - unsigned long ccsr, clkcfg; - unsigned int l, L, m, M, n2, N, S; -@@ -79,7 +80,7 @@ - * Return the current mem clock frequency in units of 10kHz as - * reflected by CCCR[A], B, and L - */ --unsigned int get_memclk_frequency_10khz(void) -+unsigned int pxa27x_get_memclk_frequency_10khz(void) - { - unsigned long ccsr, clkcfg; - unsigned int l, L, m, M; -@@ -104,7 +105,7 @@ - /* - * Return the current LCD clock frequency in units of 10kHz as - */ --unsigned int get_lcdclk_frequency_10khz(void) -+static unsigned int pxa27x_get_lcdclk_frequency_10khz(void) - { - unsigned long ccsr; - unsigned int l, L, k, K; -@@ -120,9 +121,47 @@ - return (K / 10000); - } - --EXPORT_SYMBOL(get_clk_frequency_khz); --EXPORT_SYMBOL(get_memclk_frequency_10khz); --EXPORT_SYMBOL(get_lcdclk_frequency_10khz); -+static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk) -+{ -+ return pxa27x_get_lcdclk_frequency_10khz() * 10000; -+} -+ -+static const struct clkops clk_pxa27x_lcd_ops = { -+ .enable = clk_cken_enable, -+ .disable = clk_cken_disable, -+ .getrate = clk_pxa27x_lcd_getrate, -+}; -+ -+static struct clk pxa27x_clks[] = { -+ INIT_CK("LCDCLK", LCD, &clk_pxa27x_lcd_ops, &pxa_device_fb.dev), -+ INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL), -+ -+ INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), -+ INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), -+ INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL), -+ -+ INIT_CKEN("I2SCLK", I2S, 14682000, 0, &pxa_device_i2s.dev), -+ INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), -+ INIT_CKEN("UDCCLK", USB, 48000000, 5, &pxa_device_udc.dev), -+ INIT_CKEN("MMCCLK", MMC, 19500000, 0, &pxa_device_mci.dev), -+ INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev), -+ -+ INIT_CKEN("USBCLK", USB, 48000000, 0, &pxa27x_device_ohci.dev), -+ INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), -+ INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), -+ -+ /* -+ INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), -+ INIT_CKEN("SSPCLK", SSP1, 13000000, 0, NULL), -+ INIT_CKEN("SSPCLK", SSP2, 13000000, 0, NULL), -+ INIT_CKEN("SSPCLK", SSP3, 13000000, 0, NULL), -+ INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), -+ INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL), -+ INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL), -+ INIT_CKEN("IMCLK", IM, 0, 0, NULL), -+ INIT_CKEN("MEMCLK", MEMC, 0, 0, NULL), -+ */ -+}; - - #ifdef CONFIG_PM - -@@ -269,6 +308,69 @@ - } - #endif - -+/* PXA27x: Various gpios can issue wakeup events. This logic only -+ * handles the simple cases, not the WEMUX2 and WEMUX3 options -+ */ -+#define PXA27x_GPIO_NOWAKE_MASK \ -+ ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)) -+#define WAKEMASK(gpio) \ -+ (((gpio) <= 15) \ -+ ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \ -+ : ((gpio == 35) ? (1 << 24) : 0)) -+ -+static int pxa27x_set_wake(unsigned int irq, unsigned int on) -+{ -+ int gpio = IRQ_TO_GPIO(irq); -+ uint32_t mask; -+ -+ if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) { -+ if (WAKEMASK(gpio) == 0) -+ return -EINVAL; -+ -+ mask = WAKEMASK(gpio); -+ -+ if (on) { -+ if (GRER(gpio) | GPIO_bit(gpio)) -+ PRER |= mask; -+ else -+ PRER &= ~mask; -+ -+ if (GFER(gpio) | GPIO_bit(gpio)) -+ PFER |= mask; -+ else -+ PFER &= ~mask; -+ } -+ goto set_pwer; -+ } -+ -+ switch (irq) { -+ case IRQ_RTCAlrm: -+ mask = PWER_RTC; -+ break; -+ case IRQ_USB: -+ mask = 1u << 26; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+set_pwer: -+ if (on) -+ PWER |= mask; -+ else -+ PWER &=~mask; -+ -+ return 0; -+} -+ -+void __init pxa27x_init_irq(void) -+{ -+ pxa_init_irq_low(); -+ pxa_init_irq_high(); -+ pxa_init_irq_gpio(128); -+ pxa_init_irq_set_wake(pxa27x_set_wake); -+} -+ - /* - * device registration specific to PXA27x. - */ -@@ -288,7 +390,7 @@ - }, - }; - --static struct platform_device pxa27x_device_ohci = { -+struct platform_device pxa27x_device_ohci = { - .name = "pxa27x-ohci", - .id = -1, - .dev = { -@@ -316,7 +418,7 @@ - }, - }; - --static struct platform_device pxa27x_device_i2c_power = { -+struct platform_device pxa27x_device_i2c_power = { - .name = "pxa2xx-i2c", - .id = 1, - .resource = i2c_power_resources, -@@ -338,17 +440,12 @@ - &pxa27x_device_ohci, - }; - --void __init pxa27x_init_irq(void) --{ -- pxa_init_irq_low(); -- pxa_init_irq_high(); -- pxa_init_irq_gpio(128); --} -- - static int __init pxa27x_init(void) - { - int ret = 0; - if (cpu_is_pxa27x()) { -+ clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks)); -+ - if ((ret = pxa_init_dma(32))) - return ret; - #ifdef CONFIG_PM ---- /dev/null -+++ linux-2.6.23/arch/arm/mach-pxa/pxa300.c -@@ -0,0 +1,93 @@ -+/* -+ * linux/arch/arm/mach-pxa/pxa300.c -+ * -+ * Code specific to PXA300/PXA310 -+ * -+ * Copyright (C) 2007 Marvell Internation Ltd. -+ * -+ * 2007-08-21: eric miao -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+ -+static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = { -+ -+ MFP_ADDR_X(GPIO0, GPIO2, 0x00b4), -+ MFP_ADDR_X(GPIO3, GPIO26, 0x027c), -+ MFP_ADDR_X(GPIO27, GPIO127, 0x0400), -+ MFP_ADDR_X(GPIO0_2, GPIO6_2, 0x02ec), -+ -+ MFP_ADDR(nBE0, 0x0204), -+ MFP_ADDR(nBE1, 0x0208), -+ -+ MFP_ADDR(nLUA, 0x0244), -+ MFP_ADDR(nLLA, 0x0254), -+ -+ MFP_ADDR(DF_CLE_nOE, 0x0240), -+ MFP_ADDR(DF_nRE_nOE, 0x0200), -+ MFP_ADDR(DF_ALE_nWE, 0x020C), -+ MFP_ADDR(DF_INT_RnB, 0x00C8), -+ MFP_ADDR(DF_nCS0, 0x0248), -+ MFP_ADDR(DF_nCS1, 0x0278), -+ MFP_ADDR(DF_nWE, 0x00CC), -+ -+ MFP_ADDR(DF_ADDR0, 0x0210), -+ MFP_ADDR(DF_ADDR1, 0x0214), -+ MFP_ADDR(DF_ADDR2, 0x0218), -+ MFP_ADDR(DF_ADDR3, 0x021C), -+ -+ MFP_ADDR(DF_IO0, 0x0220), -+ MFP_ADDR(DF_IO1, 0x0228), -+ MFP_ADDR(DF_IO2, 0x0230), -+ MFP_ADDR(DF_IO3, 0x0238), -+ MFP_ADDR(DF_IO4, 0x0258), -+ MFP_ADDR(DF_IO5, 0x0260), -+ MFP_ADDR(DF_IO6, 0x0268), -+ MFP_ADDR(DF_IO7, 0x0270), -+ MFP_ADDR(DF_IO8, 0x0224), -+ MFP_ADDR(DF_IO9, 0x022C), -+ MFP_ADDR(DF_IO10, 0x0234), -+ MFP_ADDR(DF_IO11, 0x023C), -+ MFP_ADDR(DF_IO12, 0x025C), -+ MFP_ADDR(DF_IO13, 0x0264), -+ MFP_ADDR(DF_IO14, 0x026C), -+ MFP_ADDR(DF_IO15, 0x0274), -+ -+ MFP_ADDR_END, -+}; -+ -+/* override pxa300 MFP register addresses */ -+static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = { -+ MFP_ADDR_X(GPIO30, GPIO98, 0x0418), -+ MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C), -+ -+ MFP_ADDR(ULPI_STP, 0x040C), -+ MFP_ADDR(ULPI_NXT, 0x0410), -+ MFP_ADDR(ULPI_DIR, 0x0414), -+ -+ MFP_ADDR_END, -+}; -+ -+static int __init pxa300_init(void) -+{ -+ if (cpu_is_pxa300() || cpu_is_pxa310()) { -+ pxa3xx_init_mfp(); -+ pxa3xx_mfp_init_addr(pxa300_mfp_addr_map); -+ } -+ -+ if (cpu_is_pxa310()) -+ pxa3xx_mfp_init_addr(pxa310_mfp_addr_map); -+ -+ return 0; -+} -+ -+core_initcall(pxa300_init); ---- /dev/null -+++ linux-2.6.23/arch/arm/mach-pxa/pxa320.c -@@ -0,0 +1,88 @@ -+/* -+ * linux/arch/arm/mach-pxa/pxa320.c -+ * -+ * Code specific to PXA320 -+ * -+ * Copyright (C) 2007 Marvell Internation Ltd. -+ * -+ * 2007-08-21: eric miao -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+ -+static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = { -+ -+ MFP_ADDR_X(GPIO0, GPIO4, 0x0124), -+ MFP_ADDR_X(GPIO5, GPIO26, 0x028C), -+ MFP_ADDR_X(GPIO27, GPIO62, 0x0400), -+ MFP_ADDR_X(GPIO63, GPIO73, 0x04B4), -+ MFP_ADDR_X(GPIO74, GPIO98, 0x04F0), -+ MFP_ADDR_X(GPIO99, GPIO127, 0x0600), -+ MFP_ADDR_X(GPIO0_2, GPIO5_2, 0x0674), -+ MFP_ADDR_X(GPIO6_2, GPIO13_2, 0x0494), -+ MFP_ADDR_X(GPIO14_2, GPIO17_2, 0x04E0), -+ -+ MFP_ADDR(nXCVREN, 0x0138), -+ MFP_ADDR(DF_CLE_nOE, 0x0204), -+ MFP_ADDR(DF_nADV1_ALE, 0x0208), -+ MFP_ADDR(DF_SCLK_S, 0x020C), -+ MFP_ADDR(DF_SCLK_E, 0x0210), -+ MFP_ADDR(nBE0, 0x0214), -+ MFP_ADDR(nBE1, 0x0218), -+ MFP_ADDR(DF_nADV2_ALE, 0x021C), -+ MFP_ADDR(DF_INT_RnB, 0x0220), -+ MFP_ADDR(DF_nCS0, 0x0224), -+ MFP_ADDR(DF_nCS1, 0x0228), -+ MFP_ADDR(DF_nWE, 0x022C), -+ MFP_ADDR(DF_nRE_nOE, 0x0230), -+ MFP_ADDR(nLUA, 0x0234), -+ MFP_ADDR(nLLA, 0x0238), -+ MFP_ADDR(DF_ADDR0, 0x023C), -+ MFP_ADDR(DF_ADDR1, 0x0240), -+ MFP_ADDR(DF_ADDR2, 0x0244), -+ MFP_ADDR(DF_ADDR3, 0x0248), -+ MFP_ADDR(DF_IO0, 0x024C), -+ MFP_ADDR(DF_IO8, 0x0250), -+ MFP_ADDR(DF_IO1, 0x0254), -+ MFP_ADDR(DF_IO9, 0x0258), -+ MFP_ADDR(DF_IO2, 0x025C), -+ MFP_ADDR(DF_IO10, 0x0260), -+ MFP_ADDR(DF_IO3, 0x0264), -+ MFP_ADDR(DF_IO11, 0x0268), -+ MFP_ADDR(DF_IO4, 0x026C), -+ MFP_ADDR(DF_IO12, 0x0270), -+ MFP_ADDR(DF_IO5, 0x0274), -+ MFP_ADDR(DF_IO13, 0x0278), -+ MFP_ADDR(DF_IO6, 0x027C), -+ MFP_ADDR(DF_IO14, 0x0280), -+ MFP_ADDR(DF_IO7, 0x0284), -+ MFP_ADDR(DF_IO15, 0x0288), -+ -+ MFP_ADDR_END, -+}; -+ -+static void __init pxa320_init_mfp(void) -+{ -+ pxa3xx_init_mfp(); -+ pxa3xx_mfp_init_addr(pxa320_mfp_addr_map); -+} -+ -+static int __init pxa320_init(void) -+{ -+ if (cpu_is_pxa320()) -+ pxa320_init_mfp(); -+ -+ return 0; -+} -+ -+core_initcall(pxa320_init); ---- /dev/null -+++ linux-2.6.23/arch/arm/mach-pxa/pxa3xx.c -@@ -0,0 +1,216 @@ -+/* -+ * linux/arch/arm/mach-pxa/pxa3xx.c -+ * -+ * code specific to pxa3xx aka Monahans -+ * -+ * Copyright (C) 2006 Marvell International Ltd. -+ * -+ * 2007-09-02: eric miao -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "generic.h" -+#include "devices.h" -+#include "clock.h" -+ -+/* Crystal clock: 13MHz */ -+#define BASE_CLK 13000000 -+ -+/* Ring Oscillator Clock: 60MHz */ -+#define RO_CLK 60000000 -+ -+#define ACCR_D0CS (1 << 26) -+ -+/* crystal frequency to static memory controller multiplier (SMCFS) */ -+static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, }; -+ -+/* crystal frequency to HSIO bus frequency multiplier (HSS) */ -+static unsigned char hss_mult[4] = { 8, 12, 16, 0 }; -+ -+/* -+ * Get the clock frequency as reflected by CCSR and the turbo flag. -+ * We assume these values have been applied via a fcs. -+ * If info is not 0 we also display the current settings. -+ */ -+unsigned int pxa3xx_get_clk_frequency_khz(int info) -+{ -+ unsigned long acsr, xclkcfg; -+ unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS; -+ -+ /* Read XCLKCFG register turbo bit */ -+ __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg)); -+ t = xclkcfg & 0x1; -+ -+ acsr = ACSR; -+ -+ xl = acsr & 0x1f; -+ xn = (acsr >> 8) & 0x7; -+ hss = (acsr >> 14) & 0x3; -+ -+ XL = xl * BASE_CLK; -+ XN = xn * XL; -+ -+ ro = acsr & ACCR_D0CS; -+ -+ CLK = (ro) ? RO_CLK : ((t) ? XN : XL); -+ HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK; -+ -+ if (info) { -+ pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n", -+ RO_CLK / 1000000, (RO_CLK % 1000000) / 10000, -+ (ro) ? "" : "in"); -+ pr_info("Run Mode clock: %d.%02dMHz (*%d)\n", -+ XL / 1000000, (XL % 1000000) / 10000, xl); -+ pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n", -+ XN / 1000000, (XN % 1000000) / 10000, xn, -+ (t) ? "" : "in"); -+ pr_info("HSIO bus clock: %d.%02dMHz\n", -+ HSS / 1000000, (HSS % 1000000) / 10000); -+ } -+ -+ return CLK; -+} -+ -+/* -+ * Return the current static memory controller clock frequency -+ * in units of 10kHz -+ */ -+unsigned int pxa3xx_get_memclk_frequency_10khz(void) -+{ -+ unsigned long acsr; -+ unsigned int smcfs, clk = 0; -+ -+ acsr = ACSR; -+ -+ smcfs = (acsr >> 23) & 0x7; -+ clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK; -+ -+ return (clk / 10000); -+} -+ -+/* -+ * Return the current HSIO bus clock frequency -+ */ -+static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk) -+{ -+ unsigned long acsr; -+ unsigned int hss, hsio_clk; -+ -+ acsr = ACSR; -+ -+ hss = (acsr >> 14) & 0x3; -+ hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK; -+ -+ return hsio_clk; -+} -+ -+static void clk_pxa3xx_cken_enable(struct clk *clk) -+{ -+ unsigned long mask = 1ul << (clk->cken & 0x1f); -+ -+ local_irq_disable(); -+ -+ if (clk->cken < 32) -+ CKENA |= mask; -+ else -+ CKENB |= mask; -+ -+ local_irq_enable(); -+} -+ -+static void clk_pxa3xx_cken_disable(struct clk *clk) -+{ -+ unsigned long mask = 1ul << (clk->cken & 0x1f); -+ -+ local_irq_disable(); -+ -+ if (clk->cken < 32) -+ CKENA &= ~mask; -+ else -+ CKENB &= ~mask; -+ -+ local_irq_enable(); -+} -+ -+static const struct clkops clk_pxa3xx_hsio_ops = { -+ .enable = clk_pxa3xx_cken_enable, -+ .disable = clk_pxa3xx_cken_disable, -+ .getrate = clk_pxa3xx_hsio_getrate, -+}; -+ -+static struct clk pxa3xx_clks[] = { -+ INIT_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), -+ INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), -+ -+ INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), -+ INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), -+ INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL), -+ -+ INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), -+ INIT_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), -+}; -+ -+void __init pxa3xx_init_irq(void) -+{ -+ /* enable CP6 access */ -+ u32 value; -+ __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value)); -+ value |= (1 << 6); -+ __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); -+ -+ pxa_init_irq_low(); -+ pxa_init_irq_high(); -+ pxa_init_irq_gpio(128); -+} -+ -+/* -+ * device registration specific to PXA3xx. -+ */ -+ -+static struct platform_device *devices[] __initdata = { -+ &pxa_device_mci, -+ &pxa_device_udc, -+ &pxa_device_fb, -+ &pxa_device_ffuart, -+ &pxa_device_btuart, -+ &pxa_device_stuart, -+ &pxa_device_i2c, -+ &pxa_device_i2s, -+ &pxa_device_ficp, -+ &pxa_device_rtc, -+}; -+ -+static int __init pxa3xx_init(void) -+{ -+ int ret = 0; -+ -+ if (cpu_is_pxa3xx()) { -+ clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks)); -+ -+ if ((ret = pxa_init_dma(32))) -+ return ret; -+ -+ return platform_add_devices(devices, ARRAY_SIZE(devices)); -+ } -+ return 0; -+} -+ -+subsys_initcall(pxa3xx_init); ---- linux-2.6.23.orig/arch/arm/mach-pxa/time.c -+++ linux-2.6.23/arch/arm/mach-pxa/time.c -@@ -16,10 +16,48 @@ - #include - #include - #include -+#include - -+#include -+#include - #include - #include - #include -+#include -+ -+/* -+ * This is PXA's sched_clock implementation. This has a resolution -+ * of at least 308 ns and a maximum value of 208 days. -+ * -+ * The return value is guaranteed to be monotonic in that range as -+ * long as there is always less than 582 seconds between successive -+ * calls to sched_clock() which should always be the case in practice. -+ */ -+ -+#define OSCR2NS_SCALE_FACTOR 10 -+ -+static unsigned long oscr2ns_scale; -+ -+static void __init set_oscr2ns_scale(unsigned long oscr_rate) -+{ -+ unsigned long long v = 1000000000ULL << OSCR2NS_SCALE_FACTOR; -+ do_div(v, oscr_rate); -+ oscr2ns_scale = v; -+ /* -+ * We want an even value to automatically clear the top bit -+ * returned by cnt32_to_63() without an additional run time -+ * instruction. So if the LSB is 1 then round it up. -+ */ -+ if (oscr2ns_scale & 1) -+ oscr2ns_scale++; -+} -+ -+unsigned long long sched_clock(void) -+{ -+ unsigned long long v = cnt32_to_63(OSCR); -+ return (v * oscr2ns_scale) >> OSCR2NS_SCALE_FACTOR; -+} -+ - - static irqreturn_t - pxa_ost0_interrupt(int irq, void *dev_id) -@@ -149,18 +187,29 @@ - - static void __init pxa_timer_init(void) - { -+ unsigned long clock_tick_rate; -+ - OIER = 0; - OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - -+ if (cpu_is_pxa21x() || cpu_is_pxa25x()) -+ clock_tick_rate = 3686400; -+ else if (machine_is_mainstone()) -+ clock_tick_rate = 3249600; -+ else -+ clock_tick_rate = 3250000; -+ -+ set_oscr2ns_scale(clock_tick_rate); -+ - ckevt_pxa_osmr0.mult = -- div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); -+ div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); - ckevt_pxa_osmr0.max_delta_ns = - clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); - ckevt_pxa_osmr0.min_delta_ns = - clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1; - - cksrc_pxa_oscr0.mult = -- clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_pxa_oscr0.shift); -+ clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift); - - setup_irq(IRQ_OST0, &pxa_ost0_irq); - ---- /dev/null -+++ linux-2.6.23/arch/arm/mach-pxa/zylonite.c -@@ -0,0 +1,184 @@ -+/* -+ * linux/arch/arm/mach-pxa/zylonite.c -+ * -+ * Support for the PXA3xx Development Platform (aka Zylonite) -+ * -+ * Copyright (C) 2006 Marvell International Ltd. -+ * -+ * 2007-09-04: eric miao -+ * rewrite to align with latest kernel -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "generic.h" -+ -+int gpio_backlight; -+int gpio_eth_irq; -+ -+int lcd_id; -+int lcd_orientation; -+ -+static struct resource smc91x_resources[] = { -+ [0] = { -+ .start = ZYLONITE_ETH_PHYS + 0x300, -+ .end = ZYLONITE_ETH_PHYS + 0xfffff, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = -1, /* for run-time assignment */ -+ .end = -1, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct platform_device smc91x_device = { -+ .name = "smc91x", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(smc91x_resources), -+ .resource = smc91x_resources, -+}; -+ -+#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES) -+static void zylonite_backlight_power(int on) -+{ -+ gpio_set_value(gpio_backlight, on); -+} -+ -+static struct pxafb_mode_info toshiba_ltm035a776c_mode = { -+ .pixclock = 110000, -+ .xres = 240, -+ .yres = 320, -+ .bpp = 16, -+ .hsync_len = 4, -+ .left_margin = 6, -+ .right_margin = 4, -+ .vsync_len = 2, -+ .upper_margin = 2, -+ .lower_margin = 3, -+ .sync = FB_SYNC_VERT_HIGH_ACT, -+}; -+ -+static struct pxafb_mode_info toshiba_ltm04c380k_mode = { -+ .pixclock = 50000, -+ .xres = 640, -+ .yres = 480, -+ .bpp = 16, -+ .hsync_len = 1, -+ .left_margin = 0x9f, -+ .right_margin = 1, -+ .vsync_len = 44, -+ .upper_margin = 0, -+ .lower_margin = 0, -+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, -+}; -+ -+static struct pxafb_mach_info zylonite_toshiba_lcd_info = { -+ .num_modes = 1, -+ .lccr0 = LCCR0_Act, -+ .lccr3 = LCCR3_PCP, -+ .pxafb_backlight_power = zylonite_backlight_power, -+}; -+ -+static struct pxafb_mode_info sharp_ls037_modes[] = { -+ [0] = { -+ .pixclock = 158000, -+ .xres = 240, -+ .yres = 320, -+ .bpp = 16, -+ .hsync_len = 4, -+ .left_margin = 39, -+ .right_margin = 39, -+ .vsync_len = 1, -+ .upper_margin = 2, -+ .lower_margin = 3, -+ .sync = 0, -+ }, -+ [1] = { -+ .pixclock = 39700, -+ .xres = 480, -+ .yres = 640, -+ .bpp = 16, -+ .hsync_len = 8, -+ .left_margin = 81, -+ .right_margin = 81, -+ .vsync_len = 1, -+ .upper_margin = 2, -+ .lower_margin = 7, -+ .sync = 0, -+ }, -+}; -+ -+static struct pxafb_mach_info zylonite_sharp_lcd_info = { -+ .modes = sharp_ls037_modes, -+ .num_modes = 2, -+ .lccr0 = LCCR0_Act, -+ .lccr3 = LCCR3_PCP | LCCR3_HSP | LCCR3_VSP, -+ .pxafb_backlight_power = zylonite_backlight_power, -+}; -+ -+static void __init zylonite_init_lcd(void) -+{ -+ /* backlight GPIO: output, default on */ -+ gpio_direction_output(gpio_backlight, 1); -+ -+ if (lcd_id & 0x20) { -+ set_pxa_fb_info(&zylonite_sharp_lcd_info); -+ return; -+ } -+ -+ /* legacy LCD panels, it would be handy here if LCD panel type can -+ * be decided at run-time -+ */ -+ if (1) -+ zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode; -+ else -+ zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode; -+ -+ set_pxa_fb_info(&zylonite_toshiba_lcd_info); -+} -+#else -+static inline void zylonite_init_lcd(void) {} -+#endif -+ -+static void __init zylonite_init(void) -+{ -+ /* board-processor specific initialization */ -+ zylonite_pxa300_init(); -+ zylonite_pxa320_init(); -+ -+ /* -+ * Note: We depend that the bootloader set -+ * the correct value to MSC register for SMC91x. -+ */ -+ smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq); -+ smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq); -+ platform_device_register(&smc91x_device); -+ -+ zylonite_init_lcd(); -+} -+ -+MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") -+ .phys_io = 0x40000000, -+ .boot_params = 0xa0000100, -+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, -+ .map_io = pxa_map_io, -+ .init_irq = pxa3xx_init_irq, -+ .timer = &pxa_timer, -+ .init_machine = zylonite_init, -+MACHINE_END ---- /dev/null -+++ linux-2.6.23/arch/arm/mach-pxa/zylonite_pxa300.c -@@ -0,0 +1,188 @@ -+/* -+ * linux/arch/arm/mach-pxa/zylonite_pxa300.c -+ * -+ * PXA300/PXA310 specific support code for the -+ * PXA3xx Development Platform (aka Zylonite) -+ * -+ * Copyright (C) 2007 Marvell Internation Ltd. -+ * 2007-08-21: eric miao -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) -+ -+/* PXA300/PXA310 common configurations */ -+static mfp_cfg_t common_mfp_cfg[] __initdata = { -+ /* LCD */ -+ GPIO54_LCD_LDD_0, -+ GPIO55_LCD_LDD_1, -+ GPIO56_LCD_LDD_2, -+ GPIO57_LCD_LDD_3, -+ GPIO58_LCD_LDD_4, -+ GPIO59_LCD_LDD_5, -+ GPIO60_LCD_LDD_6, -+ GPIO61_LCD_LDD_7, -+ GPIO62_LCD_LDD_8, -+ GPIO63_LCD_LDD_9, -+ GPIO64_LCD_LDD_10, -+ GPIO65_LCD_LDD_11, -+ GPIO66_LCD_LDD_12, -+ GPIO67_LCD_LDD_13, -+ GPIO68_LCD_LDD_14, -+ GPIO69_LCD_LDD_15, -+ GPIO70_LCD_LDD_16, -+ GPIO71_LCD_LDD_17, -+ GPIO72_LCD_FCLK, -+ GPIO73_LCD_LCLK, -+ GPIO74_LCD_PCLK, -+ GPIO75_LCD_BIAS, -+ GPIO76_LCD_VSYNC, -+ GPIO127_LCD_CS_N, -+ -+ /* BTUART */ -+ GPIO111_UART2_RTS, -+ GPIO112_UART2_RXD, -+ GPIO113_UART2_TXD, -+ GPIO114_UART2_CTS, -+ -+ /* STUART */ -+ GPIO109_UART3_TXD, -+ GPIO110_UART3_RXD, -+ -+ /* AC97 */ -+ GPIO23_AC97_nACRESET, -+ GPIO24_AC97_SYSCLK, -+ GPIO29_AC97_BITCLK, -+ GPIO25_AC97_SDATA_IN_0, -+ GPIO27_AC97_SDATA_OUT, -+ GPIO28_AC97_SYNC, -+ -+ /* Keypad */ -+ GPIO107_KP_DKIN_0, -+ GPIO108_KP_DKIN_1, -+ GPIO115_KP_MKIN_0, -+ GPIO116_KP_MKIN_1, -+ GPIO117_KP_MKIN_2, -+ GPIO118_KP_MKIN_3, -+ GPIO119_KP_MKIN_4, -+ GPIO120_KP_MKIN_5, -+ GPIO2_2_KP_MKIN_6, -+ GPIO3_2_KP_MKIN_7, -+ GPIO121_KP_MKOUT_0, -+ GPIO122_KP_MKOUT_1, -+ GPIO123_KP_MKOUT_2, -+ GPIO124_KP_MKOUT_3, -+ GPIO125_KP_MKOUT_4, -+ GPIO4_2_KP_MKOUT_5, -+ GPIO5_2_KP_MKOUT_6, -+ GPIO6_2_KP_MKOUT_7, -+}; -+ -+static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { -+ /* FFUART */ -+ GPIO30_UART1_RXD, -+ GPIO31_UART1_TXD, -+ GPIO32_UART1_CTS, -+ GPIO37_UART1_RTS, -+ GPIO33_UART1_DCD, -+ GPIO34_UART1_DSR, -+ GPIO35_UART1_RI, -+ GPIO36_UART1_DTR, -+ -+ /* Ethernet */ -+ GPIO2_nCS3, -+ GPIO99_GPIO, -+}; -+ -+static mfp_cfg_t pxa310_mfp_cfg[] __initdata = { -+ /* FFUART */ -+ GPIO99_UART1_RXD, -+ GPIO100_UART1_TXD, -+ GPIO101_UART1_CTS, -+ GPIO106_UART1_RTS, -+ -+ /* Ethernet */ -+ GPIO2_nCS3, -+ GPIO102_GPIO, -+}; -+ -+#define NUM_LCD_DETECT_PINS 7 -+ -+static int lcd_detect_pins[] __initdata = { -+ MFP_PIN_GPIO71, /* LCD_LDD_17 - ORIENT */ -+ MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */ -+ MFP_PIN_GPIO75, /* LCD_BIAS - LCDID[4] */ -+ MFP_PIN_GPIO73, /* LCD_LCLK - LCDID[3] */ -+ MFP_PIN_GPIO72, /* LCD_FCLK - LCDID[2] */ -+ MFP_PIN_GPIO127,/* LCD_CS_N - LCDID[1] */ -+ MFP_PIN_GPIO76, /* LCD_VSYNC - LCDID[0] */ -+}; -+ -+static void __init zylonite_detect_lcd_panel(void) -+{ -+ unsigned long mfpr_save[NUM_LCD_DETECT_PINS]; -+ int i, gpio, id = 0; -+ -+ /* save the original MFP settings of these pins and configure -+ * them as GPIO Input, DS01X, Pull Neither, Edge Clear -+ */ -+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { -+ mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]); -+ pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440); -+ } -+ -+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { -+ id = id << 1; -+ gpio = mfp_to_gpio(lcd_detect_pins[i]); -+ gpio_direction_input(gpio); -+ -+ if (gpio_get_value(gpio)) -+ id = id | 0x1; -+ } -+ -+ /* lcd id, flush out bit 1 */ -+ lcd_id = id & 0x3d; -+ -+ /* lcd orientation, portrait or landscape */ -+ lcd_orientation = (id >> 6) & 0x1; -+ -+ /* restore the original MFP settings */ -+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) -+ pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]); -+} -+ -+void __init zylonite_pxa300_init(void) -+{ -+ if (cpu_is_pxa300() || cpu_is_pxa310()) { -+ /* initialize MFP */ -+ pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg)); -+ -+ /* detect LCD panel */ -+ zylonite_detect_lcd_panel(); -+ -+ /* GPIO pin assignment */ -+ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20); -+ } -+ -+ if (cpu_is_pxa300()) { -+ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg)); -+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99); -+ } -+ -+ if (cpu_is_pxa310()) { -+ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg)); -+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102); -+ } -+} ---- /dev/null -+++ linux-2.6.23/arch/arm/mach-pxa/zylonite_pxa320.c -@@ -0,0 +1,173 @@ -+/* -+ * linux/arch/arm/mach-pxa/zylonite_pxa320.c -+ * -+ * PXA320 specific support code for the -+ * PXA3xx Development Platform (aka Zylonite) -+ * -+ * Copyright (C) 2007 Marvell Internation Ltd. -+ * 2007-08-21: eric miao -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) -+ -+static mfp_cfg_t mfp_cfg[] __initdata = { -+ /* LCD */ -+ GPIO6_2_LCD_LDD_0, -+ GPIO7_2_LCD_LDD_1, -+ GPIO8_2_LCD_LDD_2, -+ GPIO9_2_LCD_LDD_3, -+ GPIO10_2_LCD_LDD_4, -+ GPIO11_2_LCD_LDD_5, -+ GPIO12_2_LCD_LDD_6, -+ GPIO13_2_LCD_LDD_7, -+ GPIO63_LCD_LDD_8, -+ GPIO64_LCD_LDD_9, -+ GPIO65_LCD_LDD_10, -+ GPIO66_LCD_LDD_11, -+ GPIO67_LCD_LDD_12, -+ GPIO68_LCD_LDD_13, -+ GPIO69_LCD_LDD_14, -+ GPIO70_LCD_LDD_15, -+ GPIO71_LCD_LDD_16, -+ GPIO72_LCD_LDD_17, -+ GPIO73_LCD_CS_N, -+ GPIO74_LCD_VSYNC, -+ GPIO14_2_LCD_FCLK, -+ GPIO15_2_LCD_LCLK, -+ GPIO16_2_LCD_PCLK, -+ GPIO17_2_LCD_BIAS, -+ -+ /* FFUART */ -+ GPIO41_UART1_RXD, -+ GPIO42_UART1_TXD, -+ GPIO43_UART1_CTS, -+ GPIO44_UART1_DCD, -+ GPIO45_UART1_DSR, -+ GPIO46_UART1_RI, -+ GPIO47_UART1_DTR, -+ GPIO48_UART1_RTS, -+ -+ /* AC97 */ -+ GPIO34_AC97_SYSCLK, -+ GPIO35_AC97_SDATA_IN_0, -+ GPIO37_AC97_SDATA_OUT, -+ GPIO38_AC97_SYNC, -+ GPIO39_AC97_BITCLK, -+ GPIO40_AC97_nACRESET, -+ -+ /* I2C */ -+ GPIO32_I2C_SCL, -+ GPIO33_I2C_SDA, -+ -+ /* Keypad */ -+ GPIO105_KP_DKIN_0, -+ GPIO106_KP_DKIN_1, -+ GPIO113_KP_MKIN_0, -+ GPIO114_KP_MKIN_1, -+ GPIO115_KP_MKIN_2, -+ GPIO116_KP_MKIN_3, -+ GPIO117_KP_MKIN_4, -+ GPIO118_KP_MKIN_5, -+ GPIO119_KP_MKIN_6, -+ GPIO120_KP_MKIN_7, -+ GPIO121_KP_MKOUT_0, -+ GPIO122_KP_MKOUT_1, -+ GPIO123_KP_MKOUT_2, -+ GPIO124_KP_MKOUT_3, -+ GPIO125_KP_MKOUT_4, -+ GPIO126_KP_MKOUT_5, -+ GPIO127_KP_MKOUT_6, -+ GPIO5_2_KP_MKOUT_7, -+ -+ /* Ethernet */ -+ GPIO4_nCS3, -+ GPIO90_GPIO, -+}; -+ -+#define NUM_LCD_DETECT_PINS 7 -+ -+static int lcd_detect_pins[] __initdata = { -+ MFP_PIN_GPIO72, /* LCD_LDD_17 - ORIENT */ -+ MFP_PIN_GPIO71, /* LCD_LDD_16 - LCDID[5] */ -+ MFP_PIN_GPIO17_2, /* LCD_BIAS - LCDID[4] */ -+ MFP_PIN_GPIO15_2, /* LCD_LCLK - LCDID[3] */ -+ MFP_PIN_GPIO14_2, /* LCD_FCLK - LCDID[2] */ -+ MFP_PIN_GPIO73, /* LCD_CS_N - LCDID[1] */ -+ MFP_PIN_GPIO74, /* LCD_VSYNC - LCDID[0] */ -+ /* -+ * set the MFP_PIN_GPIO 14/15/17 to alternate function other than -+ * GPIO to avoid input level confliction with 14_2, 15_2, 17_2 -+ */ -+ MFP_PIN_GPIO14, -+ MFP_PIN_GPIO15, -+ MFP_PIN_GPIO17, -+}; -+ -+static int lcd_detect_mfpr[] __initdata = { -+ /* AF0, DS 1X, Pull Neither, Edge Clear */ -+ 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, -+ 0xc442, /* Backlight, Pull-Up, AF2 */ -+ 0x8445, /* AF5 */ -+ 0x8445, /* AF5 */ -+}; -+ -+static void __init zylonite_detect_lcd_panel(void) -+{ -+ unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)]; -+ int i, gpio, id = 0; -+ -+ /* save the original MFP settings of these pins and configure them -+ * as GPIO Input, DS01X, Pull Neither, Edge Clear -+ */ -+ for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) { -+ mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]); -+ pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]); -+ } -+ -+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { -+ id = id << 1; -+ gpio = mfp_to_gpio(lcd_detect_pins[i]); -+ gpio_direction_input(gpio); -+ -+ if (gpio_get_value(gpio)) -+ id = id | 0x1; -+ } -+ -+ /* lcd id, flush out bit 1 */ -+ lcd_id = id & 0x3d; -+ -+ /* lcd orientation, portrait or landscape */ -+ lcd_orientation = (id >> 6) & 0x1; -+ -+ /* restore the original MFP settings */ -+ for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) -+ pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]); -+} -+ -+void __init zylonite_pxa320_init(void) -+{ -+ if (cpu_is_pxa320()) { -+ /* initialize MFP */ -+ pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg)); -+ -+ /* detect LCD panel */ -+ zylonite_detect_lcd_panel(); -+ -+ /* GPIO pin assignment */ -+ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO14); -+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9); -+ } -+} ---- linux-2.6.23.orig/arch/arm/mm/Kconfig -+++ linux-2.6.23/arch/arm/mm/Kconfig -@@ -322,7 +322,7 @@ - # XScale - config CPU_XSCALE - bool -- depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000 -+ depends on ARCH_IOP32X || ARCH_IOP33X || PXA25x || PXA27x || ARCH_IXP4XX || ARCH_IXP2000 - default y - select CPU_32v5 - select CPU_ABRT_EV5T -@@ -333,7 +333,7 @@ - # XScale Core Version 3 - config CPU_XSC3 - bool -- depends on ARCH_IXP23XX || ARCH_IOP13XX -+ depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx - default y - select CPU_32v5 - select CPU_ABRT_EV5T ---- linux-2.6.23.orig/drivers/i2c/busses/i2c-pxa.c -+++ linux-2.6.23/drivers/i2c/busses/i2c-pxa.c -@@ -31,6 +31,8 @@ - #include - #include - #include -+#include -+#include - - #include - #include -@@ -48,6 +50,7 @@ - unsigned int slave_addr; - - struct i2c_adapter adap; -+ struct clk *clk; - #ifdef CONFIG_I2C_PXA_SLAVE - struct i2c_slave_client *slave; - #endif -@@ -869,6 +872,12 @@ - - sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id); - -+ i2c->clk = clk_get(&dev->dev, "I2CCLK"); -+ if (IS_ERR(i2c->clk)) { -+ ret = PTR_ERR(i2c->clk); -+ goto eclk; -+ } -+ - i2c->reg_base = ioremap(res->start, res_len(res)); - if (!i2c->reg_base) { - ret = -EIO; -@@ -889,22 +898,19 @@ - } - #endif - -+ clk_enable(i2c->clk); -+#ifdef CONFIG_PXA27x - switch (dev->id) { - case 0: --#ifdef CONFIG_PXA27x - pxa_gpio_mode(GPIO117_I2CSCL_MD); - pxa_gpio_mode(GPIO118_I2CSDA_MD); --#endif -- pxa_set_cken(CKEN_I2C, 1); - break; --#ifdef CONFIG_PXA27x - case 1: - local_irq_disable(); - PCFR |= PCFR_PI2CEN; - local_irq_enable(); -- pxa_set_cken(CKEN_PWRI2C, 1); --#endif - } -+#endif - - ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED, - i2c->adap.name, i2c); -@@ -948,19 +954,18 @@ - eadapt: - free_irq(irq, i2c); - ereqirq: -- switch (dev->id) { -- case 0: -- pxa_set_cken(CKEN_I2C, 0); -- break; -+ clk_disable(i2c->clk); -+ - #ifdef CONFIG_PXA27x -- case 1: -- pxa_set_cken(CKEN_PWRI2C, 0); -+ if (dev->id == 1) { - local_irq_disable(); - PCFR &= ~PCFR_PI2CEN; - local_irq_enable(); --#endif - } -+#endif - eremap: -+ clk_put(i2c->clk); -+eclk: - kfree(i2c); - emalloc: - release_mem_region(res->start, res_len(res)); -@@ -975,18 +980,18 @@ - - i2c_del_adapter(&i2c->adap); - free_irq(i2c->irq, i2c); -- switch (dev->id) { -- case 0: -- pxa_set_cken(CKEN_I2C, 0); -- break; -+ -+ clk_disable(i2c->clk); -+ clk_put(i2c->clk); -+ - #ifdef CONFIG_PXA27x -- case 1: -- pxa_set_cken(CKEN_PWRI2C, 0); -+ if (dev->id == 1) { - local_irq_disable(); - PCFR &= ~PCFR_PI2CEN; - local_irq_enable(); --#endif - } -+#endif -+ - release_mem_region(i2c->iobase, i2c->iosize); - kfree(i2c); - ---- linux-2.6.23.orig/drivers/input/keyboard/pxa27x_keyboard.c -+++ linux-2.6.23/drivers/input/keyboard/pxa27x_keyboard.c -@@ -23,6 +23,8 @@ - #include - #include - #include -+#include -+#include - - #include - #include -@@ -40,6 +42,8 @@ - col/2 == 2 ? KPASMKP2 : KPASMKP3) - #define KPASMKPx_MKC(row, col) (1 << (row + 16 * (col % 2))) - -+static struct clk *pxakbd_clk; -+ - static irqreturn_t pxakbd_irq_handler(int irq, void *dev_id) - { - struct platform_device *pdev = dev_id; -@@ -104,7 +108,7 @@ - KPREC = 0x7F; - - /* Enable unit clock */ -- pxa_set_cken(CKEN_KEYPAD, 1); -+ clk_enable(pxakbd_clk); - - return 0; - } -@@ -112,7 +116,7 @@ - static void pxakbd_close(struct input_dev *dev) - { - /* Disable clock unit */ -- pxa_set_cken(CKEN_KEYPAD, 0); -+ clk_disable(pxakbd_clk); - } - - #ifdef CONFIG_PM -@@ -140,7 +144,8 @@ - KPREC = pdata->reg_kprec; - - /* Enable unit clock */ -- pxa_set_cken(CKEN_KEYPAD, 1); -+ clk_disable(pxakbd_clk); -+ clk_enable(pxakbd_clk); - } - - mutex_unlock(&input_dev->mutex); -@@ -158,11 +163,18 @@ - struct input_dev *input_dev; - int i, row, col, error; - -+ pxakbd_clk = clk_get(&pdev->dev, "KBDCLK"); -+ if (IS_ERR(pxakbd_clk)) { -+ error = PTR_ERR(pxakbd_clk); -+ goto err_clk; -+ } -+ - /* Create and register the input driver. */ - input_dev = input_allocate_device(); - if (!input_dev) { - printk(KERN_ERR "Cannot request keypad device\n"); -- return -ENOMEM; -+ error = -ENOMEM; -+ goto err_alloc; - } - - input_dev->name = DRIVER_NAME; -@@ -185,7 +197,6 @@ - DRIVER_NAME, pdev); - if (error) { - printk(KERN_ERR "Cannot request keypad IRQ\n"); -- pxa_set_cken(CKEN_KEYPAD, 0); - goto err_free_dev; - } - -@@ -217,6 +228,9 @@ - free_irq(IRQ_KEYPAD, pdev); - err_free_dev: - input_free_device(input_dev); -+ err_alloc: -+ clk_put(pxakbd_clk); -+ err_clk: - return error; - } - -@@ -226,6 +240,7 @@ - - input_unregister_device(input_dev); - free_irq(IRQ_KEYPAD, pdev); -+ clk_put(pxakbd_clk); - platform_set_drvdata(pdev, NULL); - - return 0; ---- linux-2.6.23.orig/drivers/mmc/host/pxamci.c -+++ linux-2.6.23/drivers/mmc/host/pxamci.c -@@ -23,6 +23,8 @@ - #include - #include - #include -+#include -+#include - #include - - #include -@@ -44,6 +46,8 @@ - spinlock_t lock; - struct resource *res; - void __iomem *base; -+ struct clk *clk; -+ unsigned long clkrate; - int irq; - int dma; - unsigned int clkrt; -@@ -119,7 +123,7 @@ - writel(nob, host->base + MMC_NOB); - writel(data->blksz, host->base + MMC_BLKLEN); - -- clks = (unsigned long long)data->timeout_ns * CLOCKRATE; -+ clks = (unsigned long long)data->timeout_ns * host->clkrate; - do_div(clks, 1000000000UL); - timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt); - writel((timeout + 255) / 256, host->base + MMC_RDTO); -@@ -358,18 +362,25 @@ - struct pxamci_host *host = mmc_priv(mmc); - - if (ios->clock) { -- unsigned int clk = CLOCKRATE / ios->clock; -- if (CLOCKRATE / clk > ios->clock) -+ unsigned long rate = host->clkrate; -+ unsigned int clk = rate / ios->clock; -+ -+ /* -+ * clk might result in a lower divisor than we -+ * desire. check for that condition and adjust -+ * as appropriate. -+ */ -+ if (rate / clk > ios->clock) - clk <<= 1; - host->clkrt = fls(clk) - 1; -- pxa_set_cken(CKEN_MMC, 1); -+ clk_enable(host->clk); - - /* - * we write clkrt on the next command - */ - } else { - pxamci_stop_clock(host); -- pxa_set_cken(CKEN_MMC, 0); -+ clk_disable(host->clk); - } - - if (host->power_mode != ios->power_mode) { -@@ -429,8 +440,6 @@ - } - - mmc->ops = &pxamci_ops; -- mmc->f_min = CLOCKRATE_MIN; -- mmc->f_max = CLOCKRATE_MAX; - - /* - * We can do SG-DMA, but we don't because we never know how much -@@ -457,6 +466,22 @@ - host->mmc = mmc; - host->dma = -1; - host->pdata = pdev->dev.platform_data; -+ -+ host->clk = clk_get(&pdev->dev, "MMCCLK"); -+ if (IS_ERR(host->clk)) { -+ ret = PTR_ERR(host->clk); -+ host->clk = NULL; -+ goto out; -+ } -+ -+ host->clkrate = clk_get_rate(host->clk); -+ -+ /* -+ * Calculate minimum clock rate, rounding up. -+ */ -+ mmc->f_min = (host->clkrate + 63) / 64; -+ mmc->f_max = host->clkrate; -+ - mmc->ocr_avail = host->pdata ? - host->pdata->ocr_mask : - MMC_VDD_32_33|MMC_VDD_33_34; -@@ -515,6 +540,8 @@ - iounmap(host->base); - if (host->sg_cpu) - dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); -+ if (host->clk) -+ clk_put(host->clk); - } - if (mmc) - mmc_free_host(mmc); -@@ -549,6 +576,8 @@ - iounmap(host->base); - dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); - -+ clk_put(host->clk); -+ - release_resource(host->res); - - mmc_free_host(mmc); ---- linux-2.6.23.orig/drivers/mmc/host/pxamci.h -+++ linux-2.6.23/drivers/mmc/host/pxamci.h -@@ -86,17 +86,3 @@ - #define MMC_RXFIFO 0x0040 /* 8 bit */ - - #define MMC_TXFIFO 0x0044 /* 8 bit */ -- --/* -- * The base MMC clock rate -- */ --#ifdef CONFIG_PXA27x --#define CLOCKRATE_MIN 304688 --#define CLOCKRATE_MAX 19500000 --#else --#define CLOCKRATE_MIN 312500 --#define CLOCKRATE_MAX 20000000 --#endif -- --#define CLOCKRATE CLOCKRATE_MAX -- ---- linux-2.6.23.orig/drivers/mtd/maps/lubbock-flash.c -+++ linux-2.6.23/drivers/mtd/maps/lubbock-flash.c -@@ -22,6 +22,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -71,9 +72,14 @@ - - static int __init init_lubbock(void) - { -- int flashboot = (LUB_CONF_SWITCHES & 1); -+ int flashboot; - int ret = 0, i; - -+ if (!machine_is_lubbock()) -+ return -ENODEV; -+ -+ flashboot = (LUB_CONF_SWITCHES & 1); -+ - lubbock_maps[0].bankwidth = lubbock_maps[1].bankwidth = - (BOOT_DEF & 1) ? 2 : 4; - ---- linux-2.6.23.orig/drivers/mtd/maps/mainstone-flash.c -+++ linux-2.6.23/drivers/mtd/maps/mainstone-flash.c -@@ -22,6 +22,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -76,6 +77,9 @@ - int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ - int ret = 0, i; - -+ if (!machine_is_mainstone()) -+ return -ENODEV; -+ - mainstone_maps[0].bankwidth = (BOOT_DEF & 1) ? 2 : 4; - mainstone_maps[1].bankwidth = 4; - ---- linux-2.6.23.orig/drivers/net/irda/pxaficp_ir.c -+++ linux-2.6.23/drivers/net/irda/pxaficp_ir.c -@@ -23,6 +23,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -87,8 +88,30 @@ - - struct device *dev; - struct pxaficp_platform_data *pdata; -+ struct clk *fir_clk; -+ struct clk *sir_clk; -+ struct clk *cur_clk; - }; - -+static inline void pxa_irda_disable_clk(struct pxa_irda *si) -+{ -+ if (si->cur_clk) -+ clk_disable(si->cur_clk); -+ si->cur_clk = NULL; -+} -+ -+static inline void pxa_irda_enable_firclk(struct pxa_irda *si) -+{ -+ si->cur_clk = si->fir_clk; -+ clk_enable(si->fir_clk); -+} -+ -+static inline void pxa_irda_enable_sirclk(struct pxa_irda *si) -+{ -+ si->cur_clk = si->sir_clk; -+ clk_enable(si->sir_clk); -+} -+ - - #define IS_FIR(si) ((si)->speed >= 4000000) - #define IRDA_FRAME_SIZE_LIMIT 2047 -@@ -134,7 +157,7 @@ - DCSR(si->rxdma) &= ~DCSR_RUN; - /* disable FICP */ - ICCR0 = 0; -- pxa_set_cken(CKEN_FICP, 0); -+ pxa_irda_disable_clk(si); - - /* set board transceiver to SIR mode */ - si->pdata->transceiver_mode(si->dev, IR_SIRMODE); -@@ -144,7 +167,7 @@ - pxa_gpio_mode(GPIO47_STTXD_MD); - - /* enable the STUART clock */ -- pxa_set_cken(CKEN_STUART, 1); -+ pxa_irda_enable_sirclk(si); - } - - /* disable STUART first */ -@@ -169,7 +192,7 @@ - /* disable STUART */ - STIER = 0; - STISR = 0; -- pxa_set_cken(CKEN_STUART, 0); -+ pxa_irda_disable_clk(si); - - /* disable FICP first */ - ICCR0 = 0; -@@ -182,7 +205,7 @@ - pxa_gpio_mode(GPIO47_ICPTXD_MD); - - /* enable the FICP clock */ -- pxa_set_cken(CKEN_FICP, 1); -+ pxa_irda_enable_firclk(si); - - si->speed = speed; - pxa_irda_fir_dma_rx_start(si); -@@ -592,16 +615,15 @@ - STIER = 0; - /* disable STUART SIR mode */ - STISR = 0; -- /* disable the STUART clock */ -- pxa_set_cken(CKEN_STUART, 0); - - /* disable DMA */ - DCSR(si->txdma) &= ~DCSR_RUN; - DCSR(si->rxdma) &= ~DCSR_RUN; - /* disable FICP */ - ICCR0 = 0; -- /* disable the FICP clock */ -- pxa_set_cken(CKEN_FICP, 0); -+ -+ /* disable the STUART or FICP clocks */ -+ pxa_irda_disable_clk(si); - - DRCMR17 = 0; - DRCMR18 = 0; -@@ -792,6 +814,13 @@ - si->dev = &pdev->dev; - si->pdata = pdev->dev.platform_data; - -+ si->sir_clk = clk_get(&pdev->dev, "UARTCLK"); -+ si->fir_clk = clk_get(&pdev->dev, "FICPCLK"); -+ if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) { -+ err = PTR_ERR(IS_ERR(si->sir_clk) ? si->sir_clk : si->fir_clk); -+ goto err_mem_4; -+ } -+ - /* - * Initialise the SIR buffers - */ -@@ -831,6 +860,10 @@ - err_mem_5: - kfree(si->rx_buff.head); - err_mem_4: -+ if (si->sir_clk && !IS_ERR(si->sir_clk)) -+ clk_put(si->sir_clk); -+ if (si->fir_clk && !IS_ERR(si->fir_clk)) -+ clk_put(si->fir_clk); - free_netdev(dev); - err_mem_3: - release_mem_region(__PREG(FICP), 0x1c); -@@ -850,6 +883,8 @@ - unregister_netdev(dev); - kfree(si->tx_buff.head); - kfree(si->rx_buff.head); -+ clk_put(si->fir_clk); -+ clk_put(si->sir_clk); - free_netdev(dev); - } - ---- linux-2.6.23.orig/drivers/net/smc91x.c -+++ linux-2.6.23/drivers/net/smc91x.c -@@ -173,56 +173,6 @@ - */ - #define MII_DELAY 1 - --/* store this information for the driver.. */ --struct smc_local { -- /* -- * If I have to wait until memory is available to send a -- * packet, I will store the skbuff here, until I get the -- * desired memory. Then, I'll send it out and free it. -- */ -- struct sk_buff *pending_tx_skb; -- struct tasklet_struct tx_task; -- -- /* -- * these are things that the kernel wants me to keep, so users -- * can find out semi-useless statistics of how well the card is -- * performing -- */ -- struct net_device_stats stats; -- -- /* version/revision of the SMC91x chip */ -- int version; -- -- /* Contains the current active transmission mode */ -- int tcr_cur_mode; -- -- /* Contains the current active receive mode */ -- int rcr_cur_mode; -- -- /* Contains the current active receive/phy mode */ -- int rpc_cur_mode; -- int ctl_rfduplx; -- int ctl_rspeed; -- -- u32 msg_enable; -- u32 phy_type; -- struct mii_if_info mii; -- -- /* work queue */ -- struct work_struct phy_configure; -- struct net_device *dev; -- int work_pending; -- -- spinlock_t lock; -- --#ifdef SMC_USE_PXA_DMA -- /* DMA needs the physical address of the chip */ -- u_long physaddr; --#endif -- void __iomem *base; -- void __iomem *datacs; --}; -- - #if SMC_DEBUG > 0 - #define DBG(n, args...) \ - do { \ -@@ -2238,17 +2188,19 @@ - goto out_release_attrib; - } - -- platform_set_drvdata(pdev, ndev); -- ret = smc_probe(ndev, addr); -- if (ret != 0) -- goto out_iounmap; - #ifdef SMC_USE_PXA_DMA -- else { -+ { - struct smc_local *lp = netdev_priv(ndev); -+ lp->device = &pdev->dev; - lp->physaddr = res->start; - } - #endif - -+ platform_set_drvdata(pdev, ndev); -+ ret = smc_probe(ndev, addr); -+ if (ret != 0) -+ goto out_iounmap; -+ - smc_request_datacs(pdev, ndev); - - return 0; ---- linux-2.6.23.orig/drivers/net/smc91x.h -+++ linux-2.6.23/drivers/net/smc91x.h -@@ -461,6 +461,59 @@ - - #endif - -+ -+/* store this information for the driver.. */ -+struct smc_local { -+ /* -+ * If I have to wait until memory is available to send a -+ * packet, I will store the skbuff here, until I get the -+ * desired memory. Then, I'll send it out and free it. -+ */ -+ struct sk_buff *pending_tx_skb; -+ struct tasklet_struct tx_task; -+ -+ /* -+ * these are things that the kernel wants me to keep, so users -+ * can find out semi-useless statistics of how well the card is -+ * performing -+ */ -+ struct net_device_stats stats; -+ -+ /* version/revision of the SMC91x chip */ -+ int version; -+ -+ /* Contains the current active transmission mode */ -+ int tcr_cur_mode; -+ -+ /* Contains the current active receive mode */ -+ int rcr_cur_mode; -+ -+ /* Contains the current active receive/phy mode */ -+ int rpc_cur_mode; -+ int ctl_rfduplx; -+ int ctl_rspeed; -+ -+ u32 msg_enable; -+ u32 phy_type; -+ struct mii_if_info mii; -+ -+ /* work queue */ -+ struct work_struct phy_configure; -+ struct net_device *dev; -+ int work_pending; -+ -+ spinlock_t lock; -+ -+#ifdef SMC_USE_PXA_DMA -+ /* DMA needs the physical address of the chip */ -+ u_long physaddr; -+ struct device *device; -+#endif -+ void __iomem *base; -+ void __iomem *datacs; -+}; -+ -+ - #ifdef SMC_USE_PXA_DMA - /* - * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is -@@ -475,11 +528,12 @@ - #ifdef SMC_insl - #undef SMC_insl - #define SMC_insl(a, r, p, l) \ -- smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l) -+ smc_pxa_dma_insl(a, lp, r, dev->dma, p, l) - static inline void --smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma, -+smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, - u_char *buf, int len) - { -+ u_long physaddr = lp->physaddr; - dma_addr_t dmabuf; - - /* fallback if no DMA available */ -@@ -496,7 +550,7 @@ - } - - len *= 4; -- dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE); -+ dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE); - DCSR(dma) = DCSR_NODESC; - DTADR(dma) = dmabuf; - DSADR(dma) = physaddr + reg; -@@ -506,18 +560,19 @@ - while (!(DCSR(dma) & DCSR_STOPSTATE)) - cpu_relax(); - DCSR(dma) = 0; -- dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE); -+ dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE); - } - #endif - - #ifdef SMC_insw - #undef SMC_insw - #define SMC_insw(a, r, p, l) \ -- smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l) -+ smc_pxa_dma_insw(a, lp, r, dev->dma, p, l) - static inline void --smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma, -+smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, - u_char *buf, int len) - { -+ u_long physaddr = lp->physaddr; - dma_addr_t dmabuf; - - /* fallback if no DMA available */ -@@ -534,7 +589,7 @@ - } - - len *= 2; -- dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE); -+ dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE); - DCSR(dma) = DCSR_NODESC; - DTADR(dma) = dmabuf; - DSADR(dma) = physaddr + reg; -@@ -544,7 +599,7 @@ - while (!(DCSR(dma) & DCSR_STOPSTATE)) - cpu_relax(); - DCSR(dma) = 0; -- dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE); -+ dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE); - } - #endif - ---- linux-2.6.23.orig/drivers/serial/pxa.c -+++ linux-2.6.23/drivers/serial/pxa.c -@@ -42,6 +42,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -56,7 +57,7 @@ - unsigned char lcr; - unsigned char mcr; - unsigned int lsr_break_flag; -- unsigned int cken; -+ struct clk *clk; - char *name; - }; - -@@ -363,6 +364,8 @@ - else - up->mcr = 0; - -+ up->port.uartclk = clk_get_rate(up->clk); -+ - /* - * Allocate the IRQ - */ -@@ -568,9 +571,11 @@ - unsigned int oldstate) - { - struct uart_pxa_port *up = (struct uart_pxa_port *)port; -- pxa_set_cken(up->cken, !state); -+ - if (!state) -- udelay(1); -+ clk_enable(up->clk); -+ else -+ clk_disable(up->clk); - } - - static void serial_pxa_release_port(struct uart_port *port) -@@ -604,7 +609,7 @@ - - #ifdef CONFIG_SERIAL_PXA_CONSOLE - --static struct uart_pxa_port serial_pxa_ports[]; -+static struct uart_pxa_port *serial_pxa_ports[4]; - static struct uart_driver serial_pxa_reg; - - #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -@@ -654,9 +659,11 @@ - static void - serial_pxa_console_write(struct console *co, const char *s, unsigned int count) - { -- struct uart_pxa_port *up = &serial_pxa_ports[co->index]; -+ struct uart_pxa_port *up = serial_pxa_ports[co->index]; - unsigned int ier; - -+ clk_enable(up->clk); -+ - /* - * First save the IER then disable the interrupts - */ -@@ -671,6 +678,8 @@ - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); -+ -+ clk_disable(up->clk); - } - - static int __init -@@ -684,7 +693,9 @@ - - if (co->index == -1 || co->index >= serial_pxa_reg.nr) - co->index = 0; -- up = &serial_pxa_ports[co->index]; -+ up = serial_pxa_ports[co->index]; -+ if (!up) -+ return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); -@@ -702,15 +713,6 @@ - .data = &serial_pxa_reg, - }; - --static int __init --serial_pxa_console_init(void) --{ -- register_console(&serial_pxa_console); -- return 0; --} -- --console_initcall(serial_pxa_console_init); -- - #define PXA_CONSOLE &serial_pxa_console - #else - #define PXA_CONSOLE NULL -@@ -736,73 +738,13 @@ - .verify_port = serial_pxa_verify_port, - }; - --static struct uart_pxa_port serial_pxa_ports[] = { -- { /* FFUART */ -- .name = "FFUART", -- .cken = CKEN_FFUART, -- .port = { -- .type = PORT_PXA, -- .iotype = UPIO_MEM, -- .membase = (void *)&FFUART, -- .mapbase = __PREG(FFUART), -- .irq = IRQ_FFUART, -- .uartclk = 921600 * 16, -- .fifosize = 64, -- .ops = &serial_pxa_pops, -- .line = 0, -- }, -- }, { /* BTUART */ -- .name = "BTUART", -- .cken = CKEN_BTUART, -- .port = { -- .type = PORT_PXA, -- .iotype = UPIO_MEM, -- .membase = (void *)&BTUART, -- .mapbase = __PREG(BTUART), -- .irq = IRQ_BTUART, -- .uartclk = 921600 * 16, -- .fifosize = 64, -- .ops = &serial_pxa_pops, -- .line = 1, -- }, -- }, { /* STUART */ -- .name = "STUART", -- .cken = CKEN_STUART, -- .port = { -- .type = PORT_PXA, -- .iotype = UPIO_MEM, -- .membase = (void *)&STUART, -- .mapbase = __PREG(STUART), -- .irq = IRQ_STUART, -- .uartclk = 921600 * 16, -- .fifosize = 64, -- .ops = &serial_pxa_pops, -- .line = 2, -- }, -- }, { /* HWUART */ -- .name = "HWUART", -- .cken = CKEN_HWUART, -- .port = { -- .type = PORT_PXA, -- .iotype = UPIO_MEM, -- .membase = (void *)&HWUART, -- .mapbase = __PREG(HWUART), -- .irq = IRQ_HWUART, -- .uartclk = 921600 * 16, -- .fifosize = 64, -- .ops = &serial_pxa_pops, -- .line = 3, -- }, -- } --}; -- - static struct uart_driver serial_pxa_reg = { - .owner = THIS_MODULE, - .driver_name = "PXA serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, -- .nr = ARRAY_SIZE(serial_pxa_ports), -+ .nr = 4, - .cons = PXA_CONSOLE, - }; - -@@ -828,10 +770,68 @@ - - static int serial_pxa_probe(struct platform_device *dev) - { -- serial_pxa_ports[dev->id].port.dev = &dev->dev; -- uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port); -- platform_set_drvdata(dev, &serial_pxa_ports[dev->id]); -+ struct uart_pxa_port *sport; -+ struct resource *mmres, *irqres; -+ int ret; -+ -+ mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); -+ irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); -+ if (!mmres || !irqres) -+ return -ENODEV; -+ -+ sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); -+ if (!sport) -+ return -ENOMEM; -+ -+ sport->clk = clk_get(&dev->dev, "UARTCLK"); -+ if (IS_ERR(sport->clk)) { -+ ret = PTR_ERR(sport->clk); -+ goto err_free; -+ } -+ -+ sport->port.type = PORT_PXA; -+ sport->port.iotype = UPIO_MEM; -+ sport->port.mapbase = mmres->start; -+ sport->port.irq = irqres->start; -+ sport->port.fifosize = 64; -+ sport->port.ops = &serial_pxa_pops; -+ sport->port.line = dev->id; -+ sport->port.dev = &dev->dev; -+ sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; -+ sport->port.uartclk = clk_get_rate(sport->clk); -+ -+ /* -+ * Is it worth keeping this? -+ */ -+ if (mmres->start == __PREG(FFUART)) -+ sport->name = "FFUART"; -+ else if (mmres->start == __PREG(BTUART)) -+ sport->name = "BTUART"; -+ else if (mmres->start == __PREG(STUART)) -+ sport->name = "STUART"; -+ else if (mmres->start == __PREG(HWUART)) -+ sport->name = "HWUART"; -+ else -+ sport->name = "???"; -+ -+ sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); -+ if (!sport->port.membase) { -+ ret = -ENOMEM; -+ goto err_clk; -+ } -+ -+ serial_pxa_ports[dev->id] = sport; -+ -+ uart_add_one_port(&serial_pxa_reg, &sport->port); -+ platform_set_drvdata(dev, sport); -+ - return 0; -+ -+ err_clk: -+ clk_put(sport->clk); -+ err_free: -+ kfree(sport); -+ return ret; - } - - static int serial_pxa_remove(struct platform_device *dev) -@@ -840,8 +840,9 @@ - - platform_set_drvdata(dev, NULL); - -- if (sport) -- uart_remove_one_port(&serial_pxa_reg, &sport->port); -+ uart_remove_one_port(&serial_pxa_reg, &sport->port); -+ clk_put(sport->clk); -+ kfree(sport); - - return 0; - } ---- linux-2.6.23.orig/drivers/serial/serial_core.c -+++ linux-2.6.23/drivers/serial/serial_core.c -@@ -2128,6 +2128,14 @@ - spin_unlock_irqrestore(&port->lock, flags); - - /* -+ * If this driver supports console, and it hasn't been -+ * successfully registered yet, try to re-register it. -+ * It may be that the port was not available. -+ */ -+ if (port->cons && !(port->cons->flags & CON_ENABLED)) -+ register_console(port->cons); -+ -+ /* - * Power down all ports by default, except the - * console if we have one. - */ -@@ -2288,6 +2296,7 @@ - } - - state->port = port; -+ state->pm_state = -1; - - port->cons = drv->cons; - port->info = state->info; -@@ -2310,15 +2319,6 @@ - tty_register_device(drv->tty_driver, port->line, port->dev); - - /* -- * If this driver supports console, and it hasn't been -- * successfully registered yet, try to re-register it. -- * It may be that the port was not available. -- */ -- if (port->type != PORT_UNKNOWN && -- port->cons && !(port->cons->flags & CON_ENABLED)) -- register_console(port->cons); -- -- /* - * Ensure UPF_DEAD is not set. - */ - port->flags &= ~UPF_DEAD; ---- linux-2.6.23.orig/drivers/usb/gadget/pxa2xx_udc.c -+++ linux-2.6.23/drivers/usb/gadget/pxa2xx_udc.c -@@ -43,6 +43,8 @@ - #include - #include - #include -+#include -+#include - - #include - #include -@@ -1157,7 +1159,7 @@ - - #ifdef CONFIG_ARCH_PXA - /* Disable clock for USB device */ -- pxa_set_cken(CKEN_USB, 0); -+ clk_disable(dev->clk); - #endif - - ep0_idle (dev); -@@ -1202,8 +1204,7 @@ - - #ifdef CONFIG_ARCH_PXA - /* Enable clock for USB device */ -- pxa_set_cken(CKEN_USB, 1); -- udelay(5); -+ clk_enable(dev->clk); - #endif - - /* try to clear these bits before we enable the udc */ -@@ -2137,6 +2138,14 @@ - if (irq < 0) - return -ENODEV; - -+#ifdef CONFIG_ARCH_PXA -+ dev->clk = clk_get(&pdev->dev, "UDCCLK"); -+ if (IS_ERR(dev->clk)) { -+ retval = PTR_ERR(dev->clk); -+ goto err_clk; -+ } -+#endif -+ - pr_debug("%s: IRQ %d%s%s\n", driver_name, irq, - dev->has_cfr ? "" : " (!cfr)", - SIZE_STR "(pio)" -@@ -2152,11 +2161,10 @@ - dev_dbg(&pdev->dev, - "can't get vbus gpio %d, err: %d\n", - dev->mach->gpio_vbus, retval); -- return -EBUSY; -+ goto err_gpio_vbus; - } - gpio_direction_input(dev->mach->gpio_vbus); - vbus_irq = gpio_to_irq(dev->mach->gpio_vbus); -- set_irq_type(vbus_irq, IRQT_BOTHEDGE); - } else - vbus_irq = 0; - -@@ -2166,9 +2174,7 @@ - dev_dbg(&pdev->dev, - "can't get pullup gpio %d, err: %d\n", - dev->mach->gpio_pullup, retval); -- if (dev->mach->gpio_vbus) -- gpio_free(dev->mach->gpio_vbus); -- return -EBUSY; -+ goto err_gpio_pullup; - } - gpio_direction_output(dev->mach->gpio_pullup, 0); - } -@@ -2195,11 +2201,7 @@ - if (retval != 0) { - printk(KERN_ERR "%s: can't get irq %d, err %d\n", - driver_name, irq, retval); -- if (dev->mach->gpio_pullup) -- gpio_free(dev->mach->gpio_pullup); -- if (dev->mach->gpio_vbus) -- gpio_free(dev->mach->gpio_vbus); -- return -EBUSY; -+ goto err_irq1; - } - dev->got_irq = 1; - -@@ -2213,12 +2215,7 @@ - printk(KERN_ERR "%s: can't get irq %i, err %d\n", - driver_name, LUBBOCK_USB_DISC_IRQ, retval); - lubbock_fail0: -- free_irq(irq, dev); -- if (dev->mach->gpio_pullup) -- gpio_free(dev->mach->gpio_pullup); -- if (dev->mach->gpio_vbus) -- gpio_free(dev->mach->gpio_vbus); -- return -EBUSY; -+ goto err_irq_lub; - } - retval = request_irq(LUBBOCK_USB_IRQ, - lubbock_vbus_irq, -@@ -2234,22 +2231,37 @@ - #endif - if (vbus_irq) { - retval = request_irq(vbus_irq, udc_vbus_irq, -- IRQF_DISABLED | IRQF_SAMPLE_RANDOM, -+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM | -+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - driver_name, dev); - if (retval != 0) { - printk(KERN_ERR "%s: can't get irq %i, err %d\n", - driver_name, vbus_irq, retval); -- free_irq(irq, dev); -- if (dev->mach->gpio_pullup) -- gpio_free(dev->mach->gpio_pullup); -- if (dev->mach->gpio_vbus) -- gpio_free(dev->mach->gpio_vbus); -- return -EBUSY; -+ goto err_vbus_irq; - } - } - create_proc_files(); - - return 0; -+ -+ err_vbus_irq: -+#ifdef CONFIG_ARCH_LUBBOCK -+ free_irq(LUBBOCK_USB_DISC_IRQ, dev); -+ err_irq_lub: -+#endif -+ free_irq(irq, dev); -+ err_irq1: -+ if (dev->mach->gpio_pullup) -+ gpio_free(dev->mach->gpio_pullup); -+ err_gpio_pullup: -+ if (dev->mach->gpio_vbus) -+ gpio_free(dev->mach->gpio_vbus); -+ err_gpio_vbus: -+#ifdef CONFIG_ARCH_PXA -+ clk_put(dev->clk); -+ err_clk: -+#endif -+ return retval; - } - - static void pxa2xx_udc_shutdown(struct platform_device *_dev) -@@ -2284,6 +2296,10 @@ - if (dev->mach->gpio_pullup) - gpio_free(dev->mach->gpio_pullup); - -+#ifdef CONFIG_ARCH_PXA -+ clk_put(dev->clk); -+#endif -+ - platform_set_drvdata(pdev, NULL); - the_controller = NULL; - return 0; ---- linux-2.6.23.orig/drivers/usb/gadget/pxa2xx_udc.h -+++ linux-2.6.23/drivers/usb/gadget/pxa2xx_udc.h -@@ -125,6 +125,7 @@ - struct timer_list timer; - - struct device *dev; -+ struct clk *clk; - struct pxa2xx_udc_mach_info *mach; - u64 dma_mask; - struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS]; ---- linux-2.6.23.orig/drivers/video/pxafb.c -+++ linux-2.6.23/drivers/video/pxafb.c -@@ -37,6 +37,8 @@ - #include - #include - #include -+#include -+#include - - #include - #include -@@ -574,15 +576,15 @@ - * - * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below. - */ --static inline unsigned int get_pcd(unsigned int pixclock) -+static inline unsigned int get_pcd(struct pxafb_info *fbi, unsigned int pixclock) - { - unsigned long long pcd; - - /* FIXME: Need to take into account Double Pixel Clock mode -- * (DPC) bit? or perhaps set it based on the various clock -- * speeds */ -- -- pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock; -+ * (DPC) bit? or perhaps set it based on the various clock -+ * speeds */ -+ pcd = (unsigned long long)(clk_get_rate(fbi->clk) / 10000); -+ pcd *= pixclock; - do_div(pcd, 100000000 * 2); - /* no need for this, since we should subtract 1 anyway. they cancel */ - /* pcd += 1; */ /* make up for integer math truncations */ -@@ -591,19 +593,21 @@ - - /* - * Some touchscreens need hsync information from the video driver to -- * function correctly. We export it here. -+ * function correctly. We export it here. Note that 'hsync_time' and -+ * the value returned from pxafb_get_hsync_time() is the *reciprocal* -+ * of the hsync period in seconds. - */ - static inline void set_hsync_time(struct pxafb_info *fbi, unsigned int pcd) - { -- unsigned long long htime; -+ unsigned long htime; - - if ((pcd == 0) || (fbi->fb.var.hsync_len == 0)) { - fbi->hsync_time=0; - return; - } - -- htime = (unsigned long long)get_lcdclk_frequency_10khz() * 10000; -- do_div(htime, pcd * fbi->fb.var.hsync_len); -+ htime = clk_get_rate(fbi->clk) / (pcd * fbi->fb.var.hsync_len); -+ - fbi->hsync_time = htime; - } - -@@ -628,7 +632,7 @@ - { - struct pxafb_lcd_reg new_regs; - u_long flags; -- u_int lines_per_panel, pcd = get_pcd(var->pixclock); -+ u_int lines_per_panel, pcd = get_pcd(fbi, var->pixclock); - - pr_debug("pxafb: Configuring PXA LCD\n"); - -@@ -908,7 +912,7 @@ - pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3); - - /* enable LCD controller clock */ -- pxa_set_cken(CKEN_LCD, 1); -+ clk_enable(fbi->clk); - - down(&fcs_lcd_sem); - /* Sequence from 11.7.10 */ -@@ -950,7 +954,7 @@ - up(&fcs_lcd_sem); - - /* disable LCD controller clock */ -- pxa_set_cken(CKEN_LCD, 0); -+ clk_disable(fbi->clk); - } - - /* -@@ -1161,7 +1165,7 @@ - if ((clkinfo->old == 13000)) - break; - -- pcd = get_pcd(fbi->fb.var.pixclock); -+ pcd = get_pcd(fbi, fbi->fb.var.pixclock); - lccr3 = fbi->reg_lccr3; - set_hsync_time(fbi, pcd); - fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd); -@@ -1293,6 +1297,12 @@ - memset(fbi, 0, sizeof(struct pxafb_info)); - fbi->dev = dev; - -+ fbi->clk = clk_get(dev, "LCDCLK"); -+ if (IS_ERR(fbi->clk)) { -+ kfree(fbi); -+ return NULL; -+ } -+ - strcpy(fbi->fb.fix.id, PXA_NAME); - - fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; ---- linux-2.6.23.orig/drivers/video/pxafb.h -+++ linux-2.6.23/drivers/video/pxafb.h -@@ -94,6 +94,7 @@ - struct pxafb_info { - struct fb_info fb; - struct device *dev; -+ struct clk *clk; - - /* - * These are the addresses we mapped ---- linux-2.6.23.orig/include/asm-arm/arch-pxa/hardware.h -+++ linux-2.6.23/include/asm-arm/arch-pxa/hardware.h -@@ -80,6 +80,24 @@ - _id == 0x411; \ - }) - -+#define __cpu_is_pxa300(id) \ -+ ({ \ -+ unsigned int _id = (id) >> 4 & 0xfff; \ -+ _id == 0x688; \ -+ }) -+ -+#define __cpu_is_pxa310(id) \ -+ ({ \ -+ unsigned int _id = (id) >> 4 & 0xfff; \ -+ _id == 0x689; \ -+ }) -+ -+#define __cpu_is_pxa320(id) \ -+ ({ \ -+ unsigned int _id = (id) >> 4 & 0xfff; \ -+ _id == 0x603 || _id == 0x682; \ -+ }) -+ - #define cpu_is_pxa21x() \ - ({ \ - unsigned int id = read_cpuid(CPUID_ID); \ -@@ -98,6 +116,53 @@ - __cpu_is_pxa27x(id); \ - }) - -+#define cpu_is_pxa300() \ -+ ({ \ -+ unsigned int id = read_cpuid(CPUID_ID); \ -+ __cpu_is_pxa300(id); \ -+ }) -+ -+#define cpu_is_pxa310() \ -+ ({ \ -+ unsigned int id = read_cpuid(CPUID_ID); \ -+ __cpu_is_pxa310(id); \ -+ }) -+ -+#define cpu_is_pxa320() \ -+ ({ \ -+ unsigned int id = read_cpuid(CPUID_ID); \ -+ __cpu_is_pxa320(id); \ -+ }) -+ -+/* -+ * CPUID Core Generation Bit -+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x -+ * == 0x3 for pxa300/pxa310/pxa320 -+ */ -+#define __cpu_is_pxa2xx(id) \ -+ ({ \ -+ unsigned int _id = (id) >> 13 & 0x7; \ -+ _id <= 0x2; \ -+ }) -+ -+#define __cpu_is_pxa3xx(id) \ -+ ({ \ -+ unsigned int _id = (id) >> 13 & 0x7; \ -+ _id == 0x3; \ -+ }) -+ -+#define cpu_is_pxa2xx() \ -+ ({ \ -+ unsigned int id = read_cpuid(CPUID_ID); \ -+ __cpu_is_pxa2xx(id); \ -+ }) -+ -+#define cpu_is_pxa3xx() \ -+ ({ \ -+ unsigned int id = read_cpuid(CPUID_ID); \ -+ __cpu_is_pxa3xx(id); \ -+ }) -+ - /* - * Handy routine to set GPIO alternate functions - */ -@@ -116,13 +181,16 @@ - /* - * Routine to enable or disable CKEN - */ --extern void pxa_set_cken(int clock, int enable); -+static inline void __deprecated pxa_set_cken(int clock, int enable) -+{ -+ extern void __pxa_set_cken(int clock, int enable); -+ __pxa_set_cken(clock, enable); -+} - - /* - * return current memory and LCD clock frequency in units of 10kHz - */ - extern unsigned int get_memclk_frequency_10khz(void); --extern unsigned int get_lcdclk_frequency_10khz(void); - - #endif - ---- linux-2.6.23.orig/include/asm-arm/arch-pxa/irqs.h -+++ linux-2.6.23/include/asm-arm/arch-pxa/irqs.h -@@ -66,12 +66,6 @@ - #define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) - #define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) - --#if defined(CONFIG_PXA25x) --#define PXA_LAST_GPIO 84 --#elif defined(CONFIG_PXA27x) --#define PXA_LAST_GPIO 127 --#endif -- - /* - * The next 16 interrupts are for board specific purposes. Since - * the kernel can only run on one machine at a time, we can re-use ---- /dev/null -+++ linux-2.6.23/include/asm-arm/arch-pxa/mfp-pxa300.h -@@ -0,0 +1,574 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/mfp-pxa300.h -+ * -+ * PXA300/PXA310 specific MFP configuration definitions -+ * -+ * Copyright (C) 2007 Marvell International Ltd. -+ * 2007-08-21: eric miao -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_ARCH_MFP_PXA300_H -+#define __ASM_ARCH_MFP_PXA300_H -+ -+#include -+ -+/* GPIO */ -+#define GPIO46_GPIO MFP_CFG(GPIO46, AF1) -+#define GPIO49_GPIO MFP_CFG(GPIO49, AF3) -+#define GPIO50_GPIO MFP_CFG(GPIO50, AF2) -+#define GPIO51_GPIO MFP_CFG(GPIO51, AF3) -+#define GPIO52_GPIO MFP_CFG(GPIO52, AF3) -+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) -+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) -+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) -+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) -+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) -+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) -+ -+#ifdef CONFIG_CPU_PXA310 -+#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) -+#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) -+#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) -+#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) -+#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) -+#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) -+#endif -+ -+/* Chip Select */ -+#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1) -+ -+/* AC97 */ -+#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1) -+#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1) -+#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1) -+#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1) -+#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1) -+#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3) -+#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2) -+#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3) -+#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2) -+#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1) -+#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1) -+ -+/* I2C */ -+#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH) -+#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH) -+ -+/* QCI */ -+#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X) -+#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X) -+#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X) -+#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X) -+#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X) -+#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X) -+#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X) -+#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X) -+#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X) -+#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X) -+#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) -+#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) -+#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X) -+#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X) -+ -+/* KEYPAD */ -+#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT) -+#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT) -+#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT) -+#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT) -+#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT) -+#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT) -+#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT) -+#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT) -+#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT) -+#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT) -+#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT) -+#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT) -+#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT) -+#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT) -+#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT) -+#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT) -+#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT) -+#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT) -+#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT) -+#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT) -+#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT) -+#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT) -+#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT) -+#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT) -+#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) -+#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) -+#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) -+#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) -+#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT) -+#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) -+#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT) -+#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) -+#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) -+#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) -+#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT) -+ -+#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT) -+#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT) -+#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT) -+#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT) -+#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT) -+#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT) -+#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT) -+#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT) -+#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT) -+#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT) -+#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT) -+#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT) -+#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT) -+#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT) -+#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT) -+#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT) -+#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) -+#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT) -+#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT) -+ -+#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) -+#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH) -+#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH) -+#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) -+#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH) -+#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH) -+#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH) -+#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH) -+#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH) -+#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) -+#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) -+#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH) -+#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH) -+#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH) -+#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH) -+#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) -+#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) -+#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) -+#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) -+#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) -+#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH) -+#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) -+#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH) -+#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH) -+ -+/* LCD */ -+#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X) -+#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X) -+#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X) -+#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X) -+#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X) -+#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X) -+#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X) -+#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X) -+#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X) -+#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X) -+#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X) -+#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X) -+#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X) -+#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X) -+#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X) -+#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X) -+#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X) -+#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X) -+#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X) -+#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X) -+#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X) -+#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS01X) -+#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X) -+#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X) -+ -+#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X) -+#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X) -+#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X) -+ -+/* Mini-LCD */ -+#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X) -+#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X) -+#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X) -+#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X) -+#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X) -+#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X) -+#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X) -+#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X) -+#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X) -+#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X) -+#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X) -+#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X) -+#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X) -+#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X) -+#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X) -+#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X) -+#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X) -+#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X) -+#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X) -+#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X) -+ -+/* MMC1 */ -+#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) -+#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) -+#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH) -+#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH) -+#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH) -+#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH) -+#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) -+#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) -+ -+/* MMC2 */ -+#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH) -+#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH) -+#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH) -+#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH) -+#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH) -+#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH) -+#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) -+#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) -+#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) -+#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) -+#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH) -+#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH) -+ -+/* SSP1 */ -+#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1) -+#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1) -+#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6) -+#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2) -+#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5) -+#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5) -+#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1) -+#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1) -+#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7) -+#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2) -+#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2) -+#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7) -+#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5) -+#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4) -+#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5) -+#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6) -+#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1) -+#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6) -+#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6) -+#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1) -+ -+/* SSP2 */ -+#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2) -+#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2) -+#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2) -+#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2) -+#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2) -+#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6) -+#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6) -+#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2) -+#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2) -+#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2) -+#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7) -+#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5) -+#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4) -+#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2) -+#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5) -+#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5) -+#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2) -+#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7) -+#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6) -+#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4) -+#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2) -+#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2) -+#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4) -+#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7) -+ -+/* SSP3 */ -+#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW) -+#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT) -+#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW) -+#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT) -+#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW) -+#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT) -+#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW) -+#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT) -+#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW) -+#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT) -+#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW) -+#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT) -+ -+/* SSP4 */ -+#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) -+#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) -+#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH) -+#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH) -+#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH) -+#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH) -+ -+/* UART1 */ -+#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT) -+#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT) -+#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT) -+#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT) -+#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT) -+#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT) -+ -+#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT) -+#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT) -+#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT) -+#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT) -+#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT) -+#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) -+ -+#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT) -+#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT) -+#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT) -+#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT) -+#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT) -+#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT) -+ -+#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT) -+#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT) -+#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT) -+#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT) -+#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT) -+#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT) -+ -+#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT) -+#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT) -+#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT) -+ -+#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT) -+#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT) -+#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT) -+ -+#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) -+#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT) -+#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT) -+#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT) -+#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT) -+#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT) -+#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT) -+#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT) -+ -+#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT) -+#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) -+#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT) -+#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT) -+#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT) -+#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT) -+#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT) -+ -+/* UART2 */ -+#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT) -+#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT) -+#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT) -+#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT) -+ -+#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT) -+#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT) -+#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT) -+#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT) -+ -+#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT) -+#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT) -+#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT) -+#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT) -+ -+#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT) -+#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT) -+#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT) -+#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT) -+ -+/* UART3 */ -+#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT) -+#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT) -+#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT) -+#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT) -+ -+#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT) -+#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT) -+#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT) -+#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT) -+ -+#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT) -+#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT) -+#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT) -+#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT) -+#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT) -+#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) -+ -+#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT) -+#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT) -+#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT) -+#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT) -+#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT) -+#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) -+ -+/* USB Host */ -+#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1) -+#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1) -+ -+/* USB P3 */ -+#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2) -+#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2) -+#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2) -+#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2) -+#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2) -+#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2) -+ -+/* PWM */ -+#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1) -+#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1) -+#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1) -+#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1) -+ -+/* CIR */ -+#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5) -+#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3) -+ -+#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5) -+#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2) -+ -+#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1) -+#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7) -+#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6) -+#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6) -+#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6) -+#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6) -+#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2) -+#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3) -+#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7) -+#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6) -+ -+#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1) -+ -+#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1) -+#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1) -+#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1) -+#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1) -+ -+#define GPIO9_SCIO MFP_CFG(GPIO9, AF1) -+#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4) -+#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1) -+ -+/* -+ * PXA300 specific MFP configurations -+ */ -+#ifdef CONFIG_CPU_PXA300 -+#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2) -+#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3) -+#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4) -+#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4) -+#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5) -+#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2) -+#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2) -+#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2) -+#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2) -+#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2) -+#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2) -+#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2) -+ -+/* U2D UTMI */ -+#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1) -+#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3) -+#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1) -+#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5) -+#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3) -+#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2) -+#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5) -+#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3) -+#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2) -+#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1) -+#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5) -+#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1) -+#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3) -+#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3) -+#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3) -+#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4) -+#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3) -+#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3) -+#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3) -+#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4) -+#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2) -+#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7) -+#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4) -+#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2) -+#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3) -+#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5) -+#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1) -+#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2) -+#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3) -+#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3) -+#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2) -+#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3) -+#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5) -+#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3) -+#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5) -+#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3) -+#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4) -+#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3) -+#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7) -+#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5) -+#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3) -+#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5) -+#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3) -+#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3) -+#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3) -+#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3) -+#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3) -+#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3) -+#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3) -+#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3) -+#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3) -+#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3) -+#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3) -+#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3) -+#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3) -+#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3) -+#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3) -+#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3) -+#endif /* CONFIG_CPU_PXA300 */ -+ -+/* -+ * PXA310 specific MFP configurations -+ */ -+#ifdef CONFIG_CPU_PXA310 -+/* USB P2 */ -+#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1) -+#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1) -+#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1) -+#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1) -+#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1) -+#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1) -+ -+/* MMC1 */ -+#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3) -+#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3) -+ -+/* MMC3 */ -+#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2) -+#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2) -+#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1) -+#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1) -+#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1) -+#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1) -+#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1) -+#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1) -+ -+/* ULPI */ -+#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1) -+#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3) -+#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3) -+#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3) -+#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3) -+#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3) -+#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3) -+#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3) -+#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) -+#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) -+ -+#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) -+#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) -+#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) -+#endif /* CONFIG_CPU_PXA310 */ -+ -+#endif /* __ASM_ARCH_MFP_PXA300_H */ ---- /dev/null -+++ linux-2.6.23/include/asm-arm/arch-pxa/mfp-pxa320.h -@@ -0,0 +1,446 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/mfp-pxa320.h -+ * -+ * PXA320 specific MFP configuration definitions -+ * -+ * Copyright (C) 2007 Marvell International Ltd. -+ * 2007-08-21: eric miao -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_ARCH_MFP_PXA320_H -+#define __ASM_ARCH_MFP_PXA320_H -+ -+#include -+ -+/* GPIO */ -+#define GPIO46_GPIO MFP_CFG(GPIO6, AF0) -+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) -+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) -+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) -+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) -+ -+#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) -+#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) -+#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) -+#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) -+#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) -+#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) -+#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0) -+#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0) -+#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0) -+#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0) -+#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0) -+ -+/* Chip Select */ -+#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1) -+ -+/* AC97 */ -+#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1) -+#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1) -+#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1) -+#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1) -+#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1) -+#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2) -+#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2) -+#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3) -+#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3) -+#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1) -+#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1) -+ -+/* I2C */ -+#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH) -+#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH) -+ -+/* QCI */ -+#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X) -+#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X) -+#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X) -+#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X) -+#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X) -+#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X) -+#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X) -+#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X) -+#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X) -+#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X) -+#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X) -+#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X) -+#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X) -+#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X) -+ -+#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5) -+ -+#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3) -+#define GPIO0_DRQ MFP_CFG(GPIO0, AF2) -+#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5) -+#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6) -+#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1) -+#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4) -+#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1) -+#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1) -+ -+#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT) -+#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT) -+#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT) -+#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT) -+ -+#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT) -+#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT) -+#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT) -+#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT) -+#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT) -+#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT) -+#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT) -+#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT) -+ -+#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT) -+#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT) -+#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT) -+#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT) -+#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT) -+#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT) -+#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT) -+#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT) -+ -+#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT) -+#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT) -+ -+#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) -+#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) -+#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) -+#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) -+#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) -+#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) -+#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) -+#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) -+ -+#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT) -+#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT) -+#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT) -+#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT) -+#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT) -+#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT) -+#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT) -+#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT) -+ -+#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH) -+#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH) -+#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) -+#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) -+#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) -+#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH) -+ -+#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) -+#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) -+#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) -+#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) -+#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) -+#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH) -+#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH) -+#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) -+ -+/* LCD */ -+#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X) -+#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X) -+#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X) -+#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X) -+#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X) -+#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X) -+#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X) -+#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X) -+#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X) -+#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X) -+#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X) -+#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X) -+#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X) -+#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X) -+#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X) -+#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X) -+#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X) -+#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X) -+#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X) -+#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X) -+#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X) -+#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X) -+#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X) -+#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X) -+#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X) -+#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X) -+ -+#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X) -+#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X) -+#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X) -+#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X) -+#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X) -+#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X) -+#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X) -+#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X) -+#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X) -+#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X) -+#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X) -+#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X) -+#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X) -+#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X) -+#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X) -+#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X) -+#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X) -+#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X) -+#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X) -+#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X) -+#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X) -+#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X) -+#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X) -+#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X) -+ -+/* MMC1 */ -+#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH) -+#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH) -+#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH) -+#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH) -+#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH) -+#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) -+#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) -+#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) -+#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) -+#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH) -+#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH) -+#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH) -+#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH) -+ -+#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH) -+#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH) -+#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH) -+#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH) -+#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) -+#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) -+ -+#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH) -+#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH) -+#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH) -+#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH) -+#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH) -+#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH) -+#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH) -+#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH) -+#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH) -+#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) -+#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH) -+#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) -+ -+/* 1-Wire */ -+#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT) -+#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) -+ -+/* SSP1 */ -+#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1) -+#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1) -+#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1) -+#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1) -+#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6) -+#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1) -+#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1) -+#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6) -+ -+/* SSP2 */ -+#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2) -+#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2) -+#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2) -+#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2) -+#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2) -+#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5) -+#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2) -+#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2) -+#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5) -+ -+#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT) -+#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW) -+#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT) -+#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW) -+#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT) -+#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW) -+#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT) -+#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW) -+#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT) -+#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW) -+#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT) -+#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW) -+ -+#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH) -+#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH) -+#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH) -+#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH) -+#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) -+#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) -+#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH) -+ -+/* UART1 */ -+#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT) -+#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT) -+#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT) -+#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT) -+#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT) -+#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT) -+#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT) -+#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT) -+#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT) -+#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT) -+#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT) -+#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT) -+#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT) -+#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT) -+#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT) -+#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT) -+#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT) -+#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT) -+#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT) -+#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT) -+#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT) -+#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT) -+#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT) -+#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT) -+#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT) -+#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT) -+#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT) -+#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT) -+ -+/* UART2 */ -+#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT) -+#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT) -+#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT) -+#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT) -+#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) -+#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) -+#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT) -+#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT) -+ -+/* UART3 */ -+#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT) -+#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT) -+#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT) -+#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT) -+#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT) -+#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT) -+#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT) -+#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) -+#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) -+#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT) -+#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT) -+#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) -+#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT) -+#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT) -+#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT) -+#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT) -+#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT) -+#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT) -+#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT) -+#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT) -+ -+ -+/* USB 2.0 UTMI */ -+#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1) -+#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3) -+#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1) -+#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5) -+#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3) -+#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2) -+#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5) -+#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3) -+#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1) -+#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5) -+#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1) -+#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3) -+#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3) -+#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3) -+#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4) -+#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3) -+#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3) -+#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3) -+ -+#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3) -+#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3) -+#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3) -+#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3) -+#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3) -+#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3) -+#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3) -+#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3) -+ -+#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3) -+#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3) -+#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3) -+#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3) -+#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3) -+#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3) -+#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3) -+#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3) -+ -+#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4) -+#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2) -+#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7) -+ -+#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4) -+#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2) -+#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4) -+#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5) -+ -+#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1) -+#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2) -+#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3) -+ -+#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3) -+#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2) -+#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3) -+ -+#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5) -+#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3) -+#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7) -+#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5) -+ -+#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4) -+#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5) -+#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7) -+ -+#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5) -+#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3) -+#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5) -+ -+/* USB Host 1.1 */ -+#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1) -+#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1) -+ -+/* USB P2 */ -+#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2) -+#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4) -+#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4) -+#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2) -+#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2) -+#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2) -+#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2) -+#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2) -+#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2) -+#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2) -+ -+/* USB P3 */ -+#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2) -+#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2) -+#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2) -+#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2) -+#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2) -+#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2) -+ -+#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6) -+#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6) -+ -+#define GPIO2_RDY MFP_CFG(GPIO2, AF1) -+#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3) -+ -+#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1) -+#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1) -+#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1) -+#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1) -+ -+#endif /* __ASM_ARCH_MFP_PXA320_H */ ---- /dev/null -+++ linux-2.6.23/include/asm-arm/arch-pxa/mfp.h -@@ -0,0 +1,576 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/mfp.h -+ * -+ * Multi-Function Pin Definitions -+ * -+ * Copyright (C) 2007 Marvell International Ltd. -+ * -+ * 2007-8-21: eric miao -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_ARCH_MFP_H -+#define __ASM_ARCH_MFP_H -+ -+#define MFPR_BASE (0x40e10000) -+#define MFPR_SIZE (PAGE_SIZE) -+ -+#define mfp_to_gpio(m) ((m) % 128) -+ -+/* list of all the configurable MFP pins */ -+enum { -+ MFP_PIN_INVALID = -1, -+ -+ MFP_PIN_GPIO0 = 0, -+ MFP_PIN_GPIO1, -+ MFP_PIN_GPIO2, -+ MFP_PIN_GPIO3, -+ MFP_PIN_GPIO4, -+ MFP_PIN_GPIO5, -+ MFP_PIN_GPIO6, -+ MFP_PIN_GPIO7, -+ MFP_PIN_GPIO8, -+ MFP_PIN_GPIO9, -+ MFP_PIN_GPIO10, -+ MFP_PIN_GPIO11, -+ MFP_PIN_GPIO12, -+ MFP_PIN_GPIO13, -+ MFP_PIN_GPIO14, -+ MFP_PIN_GPIO15, -+ MFP_PIN_GPIO16, -+ MFP_PIN_GPIO17, -+ MFP_PIN_GPIO18, -+ MFP_PIN_GPIO19, -+ MFP_PIN_GPIO20, -+ MFP_PIN_GPIO21, -+ MFP_PIN_GPIO22, -+ MFP_PIN_GPIO23, -+ MFP_PIN_GPIO24, -+ MFP_PIN_GPIO25, -+ MFP_PIN_GPIO26, -+ MFP_PIN_GPIO27, -+ MFP_PIN_GPIO28, -+ MFP_PIN_GPIO29, -+ MFP_PIN_GPIO30, -+ MFP_PIN_GPIO31, -+ MFP_PIN_GPIO32, -+ MFP_PIN_GPIO33, -+ MFP_PIN_GPIO34, -+ MFP_PIN_GPIO35, -+ MFP_PIN_GPIO36, -+ MFP_PIN_GPIO37, -+ MFP_PIN_GPIO38, -+ MFP_PIN_GPIO39, -+ MFP_PIN_GPIO40, -+ MFP_PIN_GPIO41, -+ MFP_PIN_GPIO42, -+ MFP_PIN_GPIO43, -+ MFP_PIN_GPIO44, -+ MFP_PIN_GPIO45, -+ MFP_PIN_GPIO46, -+ MFP_PIN_GPIO47, -+ MFP_PIN_GPIO48, -+ MFP_PIN_GPIO49, -+ MFP_PIN_GPIO50, -+ MFP_PIN_GPIO51, -+ MFP_PIN_GPIO52, -+ MFP_PIN_GPIO53, -+ MFP_PIN_GPIO54, -+ MFP_PIN_GPIO55, -+ MFP_PIN_GPIO56, -+ MFP_PIN_GPIO57, -+ MFP_PIN_GPIO58, -+ MFP_PIN_GPIO59, -+ MFP_PIN_GPIO60, -+ MFP_PIN_GPIO61, -+ MFP_PIN_GPIO62, -+ MFP_PIN_GPIO63, -+ MFP_PIN_GPIO64, -+ MFP_PIN_GPIO65, -+ MFP_PIN_GPIO66, -+ MFP_PIN_GPIO67, -+ MFP_PIN_GPIO68, -+ MFP_PIN_GPIO69, -+ MFP_PIN_GPIO70, -+ MFP_PIN_GPIO71, -+ MFP_PIN_GPIO72, -+ MFP_PIN_GPIO73, -+ MFP_PIN_GPIO74, -+ MFP_PIN_GPIO75, -+ MFP_PIN_GPIO76, -+ MFP_PIN_GPIO77, -+ MFP_PIN_GPIO78, -+ MFP_PIN_GPIO79, -+ MFP_PIN_GPIO80, -+ MFP_PIN_GPIO81, -+ MFP_PIN_GPIO82, -+ MFP_PIN_GPIO83, -+ MFP_PIN_GPIO84, -+ MFP_PIN_GPIO85, -+ MFP_PIN_GPIO86, -+ MFP_PIN_GPIO87, -+ MFP_PIN_GPIO88, -+ MFP_PIN_GPIO89, -+ MFP_PIN_GPIO90, -+ MFP_PIN_GPIO91, -+ MFP_PIN_GPIO92, -+ MFP_PIN_GPIO93, -+ MFP_PIN_GPIO94, -+ MFP_PIN_GPIO95, -+ MFP_PIN_GPIO96, -+ MFP_PIN_GPIO97, -+ MFP_PIN_GPIO98, -+ MFP_PIN_GPIO99, -+ MFP_PIN_GPIO100, -+ MFP_PIN_GPIO101, -+ MFP_PIN_GPIO102, -+ MFP_PIN_GPIO103, -+ MFP_PIN_GPIO104, -+ MFP_PIN_GPIO105, -+ MFP_PIN_GPIO106, -+ MFP_PIN_GPIO107, -+ MFP_PIN_GPIO108, -+ MFP_PIN_GPIO109, -+ MFP_PIN_GPIO110, -+ MFP_PIN_GPIO111, -+ MFP_PIN_GPIO112, -+ MFP_PIN_GPIO113, -+ MFP_PIN_GPIO114, -+ MFP_PIN_GPIO115, -+ MFP_PIN_GPIO116, -+ MFP_PIN_GPIO117, -+ MFP_PIN_GPIO118, -+ MFP_PIN_GPIO119, -+ MFP_PIN_GPIO120, -+ MFP_PIN_GPIO121, -+ MFP_PIN_GPIO122, -+ MFP_PIN_GPIO123, -+ MFP_PIN_GPIO124, -+ MFP_PIN_GPIO125, -+ MFP_PIN_GPIO126, -+ MFP_PIN_GPIO127, -+ MFP_PIN_GPIO0_2, -+ MFP_PIN_GPIO1_2, -+ MFP_PIN_GPIO2_2, -+ MFP_PIN_GPIO3_2, -+ MFP_PIN_GPIO4_2, -+ MFP_PIN_GPIO5_2, -+ MFP_PIN_GPIO6_2, -+ MFP_PIN_GPIO7_2, -+ MFP_PIN_GPIO8_2, -+ MFP_PIN_GPIO9_2, -+ MFP_PIN_GPIO10_2, -+ MFP_PIN_GPIO11_2, -+ MFP_PIN_GPIO12_2, -+ MFP_PIN_GPIO13_2, -+ MFP_PIN_GPIO14_2, -+ MFP_PIN_GPIO15_2, -+ MFP_PIN_GPIO16_2, -+ MFP_PIN_GPIO17_2, -+ -+ MFP_PIN_ULPI_STP, -+ MFP_PIN_ULPI_NXT, -+ MFP_PIN_ULPI_DIR, -+ -+ MFP_PIN_nXCVREN, -+ MFP_PIN_DF_CLE_nOE, -+ MFP_PIN_DF_nADV1_ALE, -+ MFP_PIN_DF_SCLK_E, -+ MFP_PIN_DF_SCLK_S, -+ MFP_PIN_nBE0, -+ MFP_PIN_nBE1, -+ MFP_PIN_DF_nADV2_ALE, -+ MFP_PIN_DF_INT_RnB, -+ MFP_PIN_DF_nCS0, -+ MFP_PIN_DF_nCS1, -+ MFP_PIN_nLUA, -+ MFP_PIN_nLLA, -+ MFP_PIN_DF_nWE, -+ MFP_PIN_DF_ALE_nWE, -+ MFP_PIN_DF_nRE_nOE, -+ MFP_PIN_DF_ADDR0, -+ MFP_PIN_DF_ADDR1, -+ MFP_PIN_DF_ADDR2, -+ MFP_PIN_DF_ADDR3, -+ MFP_PIN_DF_IO0, -+ MFP_PIN_DF_IO1, -+ MFP_PIN_DF_IO2, -+ MFP_PIN_DF_IO3, -+ MFP_PIN_DF_IO4, -+ MFP_PIN_DF_IO5, -+ MFP_PIN_DF_IO6, -+ MFP_PIN_DF_IO7, -+ MFP_PIN_DF_IO8, -+ MFP_PIN_DF_IO9, -+ MFP_PIN_DF_IO10, -+ MFP_PIN_DF_IO11, -+ MFP_PIN_DF_IO12, -+ MFP_PIN_DF_IO13, -+ MFP_PIN_DF_IO14, -+ MFP_PIN_DF_IO15, -+ -+ MFP_PIN_MAX, -+}; -+ -+/* -+ * Table that determines the low power modes outputs, with actual settings -+ * used in parentheses for don't-care values. Except for the float output, -+ * the configured driven and pulled levels match, so if there is a need for -+ * non-LPM pulled output, the same configuration could probably be used. -+ * -+ * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel -+ * (bit 7) (bit 8) (bit 14d) (bit 13d) -+ * -+ * Drive 0 0 0 0 X (1) 0 -+ * Drive 1 0 1 X (1) 0 0 -+ * Pull hi (1) 1 X(1) 1 0 0 -+ * Pull lo (0) 1 X(0) 0 1 0 -+ * Z (float) 1 X(0) 0 0 0 -+ */ -+#define MFP_LPM_DRIVE_LOW 0x8 -+#define MFP_LPM_DRIVE_HIGH 0x6 -+#define MFP_LPM_PULL_HIGH 0x7 -+#define MFP_LPM_PULL_LOW 0x9 -+#define MFP_LPM_FLOAT 0x1 -+#define MFP_LPM_PULL_NEITHER 0x0 -+ -+/* -+ * The pullup and pulldown state of the MFP pin is by default determined by -+ * selected alternate function. In case some buggy devices need to override -+ * this default behavior, pxa3xx_mfp_set_pull() can be invoked with one of -+ * the following definition as the parameter. -+ * -+ * Definition pull_sel pullup_en pulldown_en -+ * MFP_PULL_HIGH 1 1 0 -+ * MFP_PULL_LOW 1 0 1 -+ * MFP_PULL_BOTH 1 1 1 -+ * MFP_PULL_NONE 1 0 0 -+ * MFP_PULL_DEFAULT 0 X X -+ * -+ * NOTE: pxa3xx_mfp_set_pull() will modify the PULLUP_EN and PULLDOWN_EN -+ * bits, which will cause potential conflicts with the low power mode -+ * setting, device drivers should take care of this -+ */ -+#define MFP_PULL_BOTH (0x7u) -+#define MFP_PULL_HIGH (0x6u) -+#define MFP_PULL_LOW (0x5u) -+#define MFP_PULL_NONE (0x4u) -+#define MFP_PULL_DEFAULT (0x0u) -+ -+#define MFP_AF0 (0) -+#define MFP_AF1 (1) -+#define MFP_AF2 (2) -+#define MFP_AF3 (3) -+#define MFP_AF4 (4) -+#define MFP_AF5 (5) -+#define MFP_AF6 (6) -+#define MFP_AF7 (7) -+ -+#define MFP_DS01X (0) -+#define MFP_DS02X (1) -+#define MFP_DS03X (2) -+#define MFP_DS04X (3) -+#define MFP_DS06X (4) -+#define MFP_DS08X (5) -+#define MFP_DS10X (6) -+#define MFP_DS12X (7) -+ -+#define MFP_EDGE_BOTH 0x3 -+#define MFP_EDGE_RISE 0x2 -+#define MFP_EDGE_FALL 0x1 -+#define MFP_EDGE_NONE 0x0 -+ -+#define MFPR_AF_MASK 0x0007 -+#define MFPR_DRV_MASK 0x1c00 -+#define MFPR_RDH_MASK 0x0200 -+#define MFPR_LPM_MASK 0xe180 -+#define MFPR_PULL_MASK 0xe000 -+#define MFPR_EDGE_MASK 0x0070 -+ -+#define MFPR_ALT_OFFSET 0 -+#define MFPR_ERE_OFFSET 4 -+#define MFPR_EFE_OFFSET 5 -+#define MFPR_EC_OFFSET 6 -+#define MFPR_SON_OFFSET 7 -+#define MFPR_SD_OFFSET 8 -+#define MFPR_SS_OFFSET 9 -+#define MFPR_DRV_OFFSET 10 -+#define MFPR_PD_OFFSET 13 -+#define MFPR_PU_OFFSET 14 -+#define MFPR_PS_OFFSET 15 -+ -+#define MFPR(af, drv, rdh, lpm, edge) \ -+ (((af) & 0x7) | (((drv) & 0x7) << 10) |\ -+ (((rdh) & 0x1) << 9) |\ -+ (((lpm) & 0x3) << 7) |\ -+ (((lpm) & 0x4) << 12)|\ -+ (((lpm) & 0x8) << 10)|\ -+ ((!(edge)) << 6) |\ -+ (((edge) & 0x1) << 5) |\ -+ (((edge) & 0x2) << 3)) -+ -+/* -+ * a possible MFP configuration is represented by a 32-bit integer -+ * bit 0..15 - MFPR value (16-bit) -+ * bit 16..31 - mfp pin index (used to obtain the MFPR offset) -+ * -+ * to facilitate the definition, the following macros are provided -+ * -+ * MFPR_DEFAULT - default MFPR value, with -+ * alternate function = 0, -+ * drive strength = fast 1mA (MFP_DS01X) -+ * low power mode = default -+ * release dalay hold = false (RDH bit) -+ * edge detection = none -+ * -+ * MFP_CFG - default MFPR value with alternate function -+ * MFP_CFG_DRV - default MFPR value with alternate function and -+ * pin drive strength -+ * MFP_CFG_LPM - default MFPR value with alternate function and -+ * low power mode -+ * MFP_CFG_X - default MFPR value with alternate function, -+ * pin drive strength and low power mode -+ * -+ * use -+ * -+ * MFP_CFG_PIN - to get the MFP pin index -+ * MFP_CFG_VAL - to get the corresponding MFPR value -+ */ -+ -+typedef uint32_t mfp_cfg_t; -+ -+#define MFP_CFG_PIN(mfp_cfg) (((mfp_cfg) >> 16) & 0xffff) -+#define MFP_CFG_VAL(mfp_cfg) ((mfp_cfg) & 0xffff) -+ -+#define MFPR_DEFAULT (0x0000) -+ -+#define MFP_CFG(pin, af) \ -+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af)) -+ -+#define MFP_CFG_DRV(pin, af, drv) \ -+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\ -+ ((MFP_##drv) << 10) | (MFP_##af)) -+ -+#define MFP_CFG_LPM(pin, af, lpm) \ -+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af) |\ -+ (((MFP_LPM_##lpm) & 0x3) << 7) |\ -+ (((MFP_LPM_##lpm) & 0x4) << 12) |\ -+ (((MFP_LPM_##lpm) & 0x8) << 10)) -+ -+#define MFP_CFG_X(pin, af, drv, lpm) \ -+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\ -+ ((MFP_##drv) << 10) | (MFP_##af) |\ -+ (((MFP_LPM_##lpm) & 0x3) << 7) |\ -+ (((MFP_LPM_##lpm) & 0x4) << 12) |\ -+ (((MFP_LPM_##lpm) & 0x8) << 10)) -+ -+/* common MFP configurations - processor specific ones defined -+ * in mfp-pxa3xx.h -+ */ -+#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) -+#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) -+#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) -+#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) -+#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) -+#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) -+#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) -+#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) -+#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) -+#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) -+#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) -+#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) -+#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) -+#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) -+#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) -+#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) -+#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) -+#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) -+#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) -+#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) -+#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) -+#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) -+#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) -+#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) -+#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) -+#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) -+#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) -+#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) -+#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) -+#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) -+#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) -+#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) -+#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) -+#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) -+#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) -+#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) -+#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) -+#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) -+#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) -+#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) -+#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) -+#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) -+#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) -+#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) -+#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) -+#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) -+ -+#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) -+#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) -+ -+#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) -+#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) -+#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) -+ -+#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) -+ -+#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) -+#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) -+#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) -+#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) -+#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) -+#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) -+#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) -+#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) -+#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) -+#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) -+#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) -+#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) -+#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) -+#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) -+#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) -+#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) -+#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) -+#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) -+#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) -+#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) -+#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) -+#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) -+#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) -+#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) -+#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) -+#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) -+#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) -+#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) -+#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) -+#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) -+#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) -+#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) -+#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) -+#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) -+#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) -+#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) -+#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) -+#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) -+#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) -+#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) -+#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) -+#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) -+#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) -+#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) -+#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) -+#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) -+#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) -+#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) -+#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) -+#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) -+#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) -+#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) -+#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) -+#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) -+#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) -+#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) -+#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) -+#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) -+#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) -+#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) -+#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) -+#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) -+#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) -+#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) -+#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) -+ -+#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) -+#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) -+#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) -+#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) -+#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) -+#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) -+#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) -+ -+/* -+ * each MFP pin will have a MFPR register, since the offset of the -+ * register varies between processors, the processor specific code -+ * should initialize the pin offsets by pxa3xx_mfp_init_addr() -+ * -+ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" -+ * structure, which represents a range of MFP pins from "start" to -+ * "end", with the offset begining at "offset", to define a single -+ * pin, let "end" = -1 -+ * -+ * use -+ * -+ * MFP_ADDR_X() to define a range of pins -+ * MFP_ADDR() to define a single pin -+ * MFP_ADDR_END to signal the end of pin offset definitions -+ */ -+struct pxa3xx_mfp_addr_map { -+ unsigned int start; -+ unsigned int end; -+ unsigned long offset; -+}; -+ -+#define MFP_ADDR_X(start, end, offset) \ -+ { MFP_PIN_##start, MFP_PIN_##end, offset } -+ -+#define MFP_ADDR(pin, offset) \ -+ { MFP_PIN_##pin, -1, offset } -+ -+#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } -+ -+struct pxa3xx_mfp_pin { -+ unsigned long mfpr_off; /* MFPRxx register offset */ -+ unsigned long mfpr_val; /* MFPRxx register value */ -+}; -+ -+/* -+ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access -+ * to the MFPR register -+ */ -+unsigned long pxa3xx_mfp_read(int mfp); -+void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); -+ -+/* -+ * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength -+ * pxa3xx_mfp_set_rdh - set MFP release delay hold on/off -+ * pxa3xx_mfp_set_lpm - set MFP low power mode state -+ * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode -+ * -+ * use these functions to override/change the default configuration -+ * done by pxa3xx_mfp_set_config(s) -+ */ -+void pxa3xx_mfp_set_afds(int mfp, int af, int ds); -+void pxa3xx_mfp_set_rdh(int mfp, int rdh); -+void pxa3xx_mfp_set_lpm(int mfp, int lpm); -+void pxa3xx_mfp_set_edge(int mfp, int edge); -+ -+/* -+ * pxa3xx_mfp_config - configure the MFPR registers -+ * -+ * used by board specific initialization code -+ */ -+void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num); -+ -+/* -+ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin -+ * index and MFPR register offset -+ * -+ * used by processor specific code -+ */ -+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); -+void __init pxa3xx_init_mfp(void); -+ -+#endif /* __ASM_ARCH_MFP_H */ ---- linux-2.6.23.orig/include/asm-arm/arch-pxa/pxa-regs.h -+++ linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h -@@ -1184,7 +1184,7 @@ - - #define GPIO_bit(x) (1 << ((x) & 0x1f)) - --#ifdef CONFIG_PXA27x -+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - - /* Interrupt Controller */ - ---- /dev/null -+++ linux-2.6.23/include/asm-arm/arch-pxa/pxa3xx-regs.h -@@ -0,0 +1,75 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h -+ * -+ * PXA3xx specific register definitions -+ * -+ * Copyright (C) 2007 Marvell International Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_ARCH_PXA3XX_REGS_H -+#define __ASM_ARCH_PXA3XX_REGS_H -+ -+/* -+ * Application Subsystem Clock -+ */ -+#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ -+#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ -+#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ -+#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ -+#define CKENB __REG(0x41340010) /* B Clock Enable Register */ -+#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ -+ -+/* -+ * Clock Enable Bit -+ */ -+#define CKEN_LCD 1 /* < LCD Clock Enable */ -+#define CKEN_USBH 2 /* < USB host clock enable */ -+#define CKEN_CAMERA 3 /* < Camera interface clock enable */ -+#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ -+#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ -+#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ -+#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ -+#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ -+#define CKEN_BOOT 11 /* < Boot rom clock enable */ -+#define CKEN_MMC1 12 /* < MMC1 Clock enable */ -+#define CKEN_MMC2 13 /* < MMC2 clock enable */ -+#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ -+#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ -+#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ -+#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ -+#define CKEN_TPM 19 /* < TPM clock enable */ -+#define CKEN_UDC 20 /* < UDC clock enable */ -+#define CKEN_BTUART 21 /* < BTUART clock enable */ -+#define CKEN_FFUART 22 /* < FFUART clock enable */ -+#define CKEN_STUART 23 /* < STUART clock enable */ -+#define CKEN_AC97 24 /* < AC97 clock enable */ -+#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ -+#define CKEN_SSP1 26 /* < SSP1 clock enable */ -+#define CKEN_SSP2 27 /* < SSP2 clock enable */ -+#define CKEN_SSP3 28 /* < SSP3 clock enable */ -+#define CKEN_SSP4 29 /* < SSP4 clock enable */ -+#define CKEN_MSL0 30 /* < MSL0 clock enable */ -+#define CKEN_PWM0 32 /* < PWM[0] clock enable */ -+#define CKEN_PWM1 33 /* < PWM[1] clock enable */ -+#define CKEN_I2C 36 /* < I2C clock enable */ -+#define CKEN_INTC 38 /* < Interrupt controller clock enable */ -+#define CKEN_GPIO 39 /* < GPIO clock enable */ -+#define CKEN_1WIRE 40 /* < 1-wire clock enable */ -+#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ -+#define CKEN_MINI_IM 48 /* < Mini-IM */ -+#define CKEN_MINI_LCD 49 /* < Mini LCD */ -+ -+#if defined(CONFIG_CPU_PXA310) -+#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ -+#define CKEN_MVED 43 /* < MVED clock enable */ -+#endif -+ -+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ -+#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */ -+#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */ -+ -+#endif /* __ASM_ARCH_PXA3XX_REGS_H */ ---- linux-2.6.23.orig/include/asm-arm/arch-pxa/timex.h -+++ linux-2.6.23/include/asm-arm/arch-pxa/timex.h -@@ -21,4 +21,6 @@ - #else - #define CLOCK_TICK_RATE 3250000 - #endif -+#else -+#define CLOCK_TICK_RATE 3250000 - #endif ---- /dev/null -+++ linux-2.6.23/include/asm-arm/arch-pxa/zylonite.h -@@ -0,0 +1,35 @@ -+#ifndef __ASM_ARCH_ZYLONITE_H -+#define __ASM_ARCH_ZYLONITE_H -+ -+#define ZYLONITE_ETH_PHYS 0x14000000 -+ -+/* the following variables are processor specific and initialized -+ * by the corresponding zylonite_pxa3xx_init() -+ */ -+extern int gpio_backlight; -+extern int gpio_eth_irq; -+ -+extern int lcd_id; -+extern int lcd_orientation; -+ -+#ifdef CONFIG_CPU_PXA300 -+extern void zylonite_pxa300_init(void); -+#else -+static inline void zylonite_pxa300_init(void) -+{ -+ if (cpu_is_pxa300() || cpu_is_pxa310()) -+ panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__); -+} -+#endif -+ -+#ifdef CONFIG_CPU_PXA320 -+extern void zylonite_pxa320_init(void); -+#else -+static inline void zylonite_pxa320_init(void) -+{ -+ if (cpu_is_pxa320()) -+ panic("%s: PXA320 not supported\n", __FUNCTION__); -+} -+#endif -+ -+#endif /* __ASM_ARCH_ZYLONITE_H */ diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/binutils-buildid-arm.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/binutils-buildid-arm.patch deleted file mode 100644 index 68e35e89e1..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/binutils-buildid-arm.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- - arch/arm/kernel/vmlinux.lds.S | 1 + - 1 file changed, 1 insertion(+) - -Index: linux-2.6.22/arch/arm/kernel/vmlinux.lds.S -=================================================================== ---- linux-2.6.22.orig/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:32:29.000000000 +0200 -+++ linux-2.6.22/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:33:42.000000000 +0200 -@@ -94,6 +94,7 @@ - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT -+ *(.note.*) - #ifdef CONFIG_MMU - *(.fixup) - #endif diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/connectplus-remove-ide-HACK.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/connectplus-remove-ide-HACK.patch deleted file mode 100644 index 4414b21191..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/connectplus-remove-ide-HACK.patch +++ /dev/null @@ -1,12 +0,0 @@ -Index: linux-2.6.13/drivers/ide/legacy/ide-cs.c -=================================================================== ---- linux-2.6.13.orig/drivers/ide/legacy/ide-cs.c 2005-09-01 22:43:46.000000000 +0100 -+++ linux-2.6.13/drivers/ide/legacy/ide-cs.c 2005-09-01 22:45:46.000000000 +0100 -@@ -488,7 +488,6 @@ - PCMCIA_DEVICE_PROD_ID123("KODAK Picture Card ", "KODAK ", "V100K", 0x94a0d8f3, 0xe4fc3ea0, 0xe5e7eed4), - PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), - PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), -- PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), - PCMCIA_DEVICE_NULL, - }; - MODULE_DEVICE_TABLE(pcmcia, ide_ids); diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-akita b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-akita deleted file mode 100644 index 7d9adaf0e3..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-akita +++ /dev/null @@ -1,1694 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Tue Oct 16 13:20:27 2007 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_EM_X270 is not set -# CONFIG_MACH_HX2750 is not set -# CONFIG_MACH_HTCUNIVERSAL is not set -# CONFIG_PXA_SHARPSL_25x is not set -CONFIG_PXA_SHARPSL_27x=y -CONFIG_MACH_AKITA=y -CONFIG_MACH_SPITZ=y -CONFIG_MACH_BORZOI=y -CONFIG_PXA27x=y -CONFIG_PXA_SHARP_Cxx00=y -CONFIG_PXA_SSP=y -# CONFIG_PXA_KEYS is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_IWMMXT=y -CONFIG_XSCALE_PMU=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARPSL_PM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=m - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 dyntick=enable quiet" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_XTABLES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -# CONFIG_IEEE80211_SOFTMAC is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=y -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_DELAY is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -CONFIG_WLAN_PRE80211=y -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set -CONFIG_WLAN_80211=y -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_LIBERTAS is not set -CONFIG_HERMES=m -# CONFIG_ATMEL is not set -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -CONFIG_AIRO_CS=m -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET_MII=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_CORGI is not set -CONFIG_KEYBOARD_SPITZ=y -# CONFIG_KEYBOARD_PXA27x is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_CORGI=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multi-Function Devices -# -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_SPITZ=y -# CONFIG_LEDS_TOSA is not set -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_TUNER_TEA5761 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -CONFIG_FB_PXA_LCD_QVGA=y -# CONFIG_FB_PXA_LCD_VGA is not set -CONFIG_FB_PXA_OVERLAY=y -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_W100 is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_SEQUENCER_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_DEBUG=y -# CONFIG_SND_DEBUG_DETECT is not set -# CONFIG_SND_PCM_XRUN_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -CONFIG_SND_PXA2XX_PCM=m -CONFIG_SND_PXA2XX_AC97=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -# CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_I2S=m -CONFIG_SND_PXA2XX_SOC_SPITZ=m - -# -# SoC Audio support for SuperH -# -CONFIG_SND_SOC_WM8750=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_M66592 is not set -CONFIG_USB_GADGET_PXA27X=y -CONFIG_USB_PXA27X=m -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_PXA=y -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_SQUASHFS_VMALLOC is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_LZO is not set -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_HW=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-bootcdx86 b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-bootcdx86 deleted file mode 100644 index 833f72ac9e..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-bootcdx86 +++ /dev/null @@ -1,1607 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.21 -# Mon Jun 11 12:01:43 2007 -# -CONFIG_X86_32=y -CONFIG_GENERIC_TIME=y -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_X86=y -CONFIG_MMU=y -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_DMI=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -# CONFIG_IKCONFIG is not set -# CONFIG_CPUSETS is not set -# CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_SMP=y -CONFIG_X86_PC=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_VOYAGER is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_BIGSMP is not set -# CONFIG_X86_VISWS is not set -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_ES7000 is not set -# CONFIG_PARAVIRT is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -CONFIG_MPENTIUMII=y -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -# CONFIG_MCORE2 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MGEODEGX1 is not set -# CONFIG_MGEODE_LX is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -CONFIG_X86_GENERIC=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -CONFIG_X86_CMPXCHG64=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_INTEL_USERCOPY=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_TSC=y -CONFIG_HPET_TIMER=y -CONFIG_NR_CPUS=8 -CONFIG_SCHED_SMT=y -CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_NONFATAL=y -CONFIG_X86_MCE_P4THERMAL=y -CONFIG_VM86=y -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_X86_REBOOTFIXUPS is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set - -# -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_SPARSEMEM_STATIC=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_EFI is not set -CONFIG_IRQBALANCE=y -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -CONFIG_PHYSICAL_START=0x100000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -# CONFIG_HOTPLUG_CPU is not set -# CONFIG_COMPAT_VDSO is not set - -# -# Power management options (ACPI, APM) -# -CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# -CONFIG_ACPI=y -CONFIG_ACPI_PROCFS=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_THERMAL=y -# CONFIG_ACPI_ASUS is not set -# CONFIG_ACPI_IBM is not set -# CONFIG_ACPI_TOSHIBA is not set -CONFIG_ACPI_BLACKLIST_YEAR=0 -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_SYSTEM=y -CONFIG_X86_PM_TIMER=y -# CONFIG_ACPI_CONTAINER is not set - -# -# APM (Advanced Power Management) BIOS Support -# -# CONFIG_APM is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GOMMCONFIG is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIEAER=y -CONFIG_PCI_MSI=y -CONFIG_HT_IRQ=y -CONFIG_ISA_DMA_API=y -CONFIG_ISA=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -# CONFIG_SCx200 is not set -CONFIG_K8_NB=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -CONFIG_PNP=y -# CONFIG_PNP_DEBUG is not set - -# -# Protocols -# -# CONFIG_ISAPNP is not set -# CONFIG_PNPBIOS is not set -CONFIG_PNPACPI=y - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_IBM_ASM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_SONY_LAPTOP is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SEAGATE is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_ULTRASTOR is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_MAC_EMUMOUSEBTN is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_NET_SB1000 is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -CONFIG_NET_VENDOR_3COM=y -# CONFIG_EL1 is not set -# CONFIG_EL2 is not set -# CONFIG_ELPLUS is not set -# CONFIG_EL16 is not set -# CONFIG_EL3 is not set -# CONFIG_3C515 is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -CONFIG_ULTRA=m -CONFIG_SMC9194=m -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# -CONFIG_NET_TULIP=y -# CONFIG_DE2104X is not set -CONFIG_TULIP=m -CONFIG_TULIP_MWI=y -CONFIG_TULIP_MMIO=y -CONFIG_TULIP_NAPI=y -CONFIG_TULIP_NAPI_HW_MITIGATION=y -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -# CONFIG_E2100 is not set -# CONFIG_EWRK3 is not set -# CONFIG_EEXPRESS is not set -# CONFIG_EEXPRESS_PRO is not set -# CONFIG_HPLAN_PLUS is not set -# CONFIG_HPLAN is not set -# CONFIG_LP486E is not set -# CONFIG_ETH16I is not set -CONFIG_NE2000=y -# CONFIG_ZNET is not set -# CONFIG_SEEQ8005 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_PCNET32_NAPI=y -CONFIG_AMD8111_ETH=m -CONFIG_AMD8111E_NAPI=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_ADAPTEC_STARFIRE_NAPI=y -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_B44=m -CONFIG_FORCEDETH=m -CONFIG_FORCEDETH_NAPI=y -CONFIG_CS89x0=m -CONFIG_DGRS=m -CONFIG_EEPRO100=m -CONFIG_E100=m -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=y -CONFIG_8139CP=m -CONFIG_8139TOO=m -CONFIG_8139TOO_PIO=y -CONFIG_8139TOO_TUNE_TWISTER=y -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -CONFIG_SUNDANCE_MMIO=y -CONFIG_TLAN=m -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -CONFIG_VIA_RHINE_NAPI=y -CONFIG_SC92031=m - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_DL2K=m -CONFIG_E1000=m -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_R8169_NAPI=y -CONFIG_SIS190=m -CONFIG_SKGE=m -CONFIG_SKY2=m -CONFIG_SK98LIN=m -CONFIG_VIA_VELOCITY=m -CONFIG_TIGON3=m -CONFIG_BNX2=m -CONFIG_QLA3XXX=m -CONFIG_ATL1=m - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_POWER is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set -CONFIG_AGP=m -CONFIG_AGP_ALI=m -CONFIG_AGP_ATI=m -CONFIG_AGP_AMD=m -CONFIG_AGP_AMD64=m -CONFIG_AGP_INTEL=m -CONFIG_AGP_NVIDIA=m -CONFIG_AGP_SIS=m -CONFIG_AGP_SWORKS=m -CONFIG_AGP_VIA=m -CONFIG_AGP_EFFICEON=m -# CONFIG_DRM is not set -# CONFIG_DRM_I830 is not set -# CONFIG_DRM_I915 is not set -# CONFIG_MWAVE is not set -# CONFIG_PC8736x_GPIO is not set -# CONFIG_NSC_GPIO is not set -# CONFIG_CS5535_GPIO is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HPET is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multi-Function Devices -# - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ARC is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -CONFIG_FB_VGA16=y -CONFIG_FB_VESA=y -# CONFIG_FB_VESA_STD is not set -CONFIG_FB_VESA_TNG=y -CONFIG_FB_VESA_DEFAULT_MODE="640x480-16@60" -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_HGA is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I810 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_GEODE is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_SEQUENCER=y -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ISA devices -# -# CONFIG_SND_ADLIB is not set -# CONFIG_SND_AD1816A is not set -# CONFIG_SND_AD1848 is not set -# CONFIG_SND_ALS100 is not set -# CONFIG_SND_AZT2320 is not set -# CONFIG_SND_CMI8330 is not set -# CONFIG_SND_CS4231 is not set -# CONFIG_SND_CS4232 is not set -# CONFIG_SND_CS4236 is not set -# CONFIG_SND_DT019X is not set -# CONFIG_SND_ES968 is not set -# CONFIG_SND_ES1688 is not set -# CONFIG_SND_ES18XX is not set -# CONFIG_SND_GUSCLASSIC is not set -# CONFIG_SND_GUSEXTREME is not set -# CONFIG_SND_GUSMAX is not set -# CONFIG_SND_INTERWAVE is not set -# CONFIG_SND_INTERWAVE_STB is not set -# CONFIG_SND_OPL3SA2 is not set -# CONFIG_SND_OPTI92X_AD1848 is not set -# CONFIG_SND_OPTI92X_CS4231 is not set -# CONFIG_SND_OPTI93X is not set -# CONFIG_SND_MIRO is not set -# CONFIG_SND_SB8 is not set -# CONFIG_SND_SB16 is not set -# CONFIG_SND_SBAWE is not set -# CONFIG_SND_SGALAXY is not set -# CONFIG_SND_SSCAPE is not set -# CONFIG_SND_WAVEFRONT is not set - -# -# PCI devices -# -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5535AUDIO is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_AC97_POWER_SAVE=y - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set - -# -# SoC audio support -# -# CONFIG_SND_SOC is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -CONFIG_USB_WACOM=y -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# -# CONFIG_EDAC is not set - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# -# CONFIG_KVM is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Instrumentation Support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -# CONFIG_KPROBES is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_EARLY_PRINTK=y -CONFIG_X86_FIND_SMP_CONFIG=y -CONFIG_X86_MPPARSE=y -CONFIG_DOUBLEFAULT=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_MANAGER=m -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_TWOFISH_586 is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_AES_586 is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# -CONFIG_CRYPTO_DEV_PADLOCK=m -CONFIG_CRYPTO_DEV_PADLOCK_AES=m -CONFIG_CRYPTO_DEV_PADLOCK_SHA=m -CONFIG_CRYPTO_DEV_GEODE=m - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_AUDIT_GENERIC=y -# CONFIG_LZO is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -CONFIG_KTIME_SCALAR=y -# CONFIG_SHARPSL_RC is not set diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-c7x0 b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-c7x0 deleted file mode 100644 index bd11500398..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-c7x0 +++ /dev/null @@ -1,1695 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Tue Oct 16 12:02:32 2007 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_EM_X270 is not set -# CONFIG_MACH_HX2750 is not set -# CONFIG_MACH_HTCUNIVERSAL is not set -CONFIG_PXA_SHARPSL_25x=y -# CONFIG_PXA_SHARPSL_27x is not set -# CONFIG_MACH_POODLE is not set -CONFIG_MACH_CORGI=y -CONFIG_MACH_SHEPHERD=y -CONFIG_MACH_HUSKY=y -# CONFIG_MACH_TOSA is not set -CONFIG_PXA25x=y -CONFIG_PXA_SHARP_C7xx=y -CONFIG_PXA_SSP=y -# CONFIG_PXA_KEYS is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -# CONFIG_IWMMXT is not set -CONFIG_XSCALE_PMU=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARPSL_PM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=m - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable quiet" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_CPU_FREQ_PXA25x=y - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_XTABLES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -# CONFIG_IEEE80211_SOFTMAC is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=y -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_DELAY is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_LIBERTAS is not set -CONFIG_HERMES=m -# CONFIG_ATMEL is not set -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET_MII=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_CORGI=y -# CONFIG_KEYBOARD_SPITZ is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_CORGI=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multi-Function Devices -# -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_CORGI=y -# CONFIG_LEDS_TOSA is not set -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_TUNER_TEA5761 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -CONFIG_USB_DSBR=m -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_PXA is not set -# CONFIG_FB_MBX is not set -CONFIG_FB_W100=y -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_SEQUENCER_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_DEBUG=y -# CONFIG_SND_DEBUG_DETECT is not set -# CONFIG_SND_PCM_XRUN_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -CONFIG_SND_PXA2XX_PCM=m -CONFIG_SND_PXA2XX_AC97=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -# CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_I2S=m -CONFIG_SND_PXA2XX_SOC_CORGI=m - -# -# SoC Audio support for SuperH -# -CONFIG_SND_SOC_WM8731=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_PXA=y -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_SQUASHFS_VMALLOC is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_LZO is not set -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_HW=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-collie b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-collie deleted file mode 100644 index 49d9596b92..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-collie +++ /dev/null @@ -1,1741 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20.4 -# Fri Apr 6 23:20:59 2007 -# -CONFIG_ARM=y -# CONFIG_GENERIC_TIME is not set -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -# CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_ELF_CORE is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -CONFIG_ARCH_SA1100=y -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set - -# -# SA11x0 Implementations -# -# CONFIG_SA1100_ASSABET is not set -# CONFIG_SA1100_CERF is not set -CONFIG_SA1100_COLLIE=y -# CONFIG_SA1100_H3100 is not set -# CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set -# CONFIG_SA1100_BADGE4 is not set -# CONFIG_SA1100_JORNADA720 is not set -# CONFIG_SA1100_HACKKIT is not set -# CONFIG_SA1100_LART is not set -# CONFIG_SA1100_PLEB is not set -# CONFIG_SA1100_SHANNON is not set -# CONFIG_SA1100_SIMPAD is not set -# CONFIG_SA1100_SSP is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_SA1100=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4=y -CONFIG_CPU_CACHE_V4WB=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -CONFIG_SHARP_LOCOMO=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -CONFIG_ISA=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -CONFIG_PCMCIA_SA1100=y - -# -# Kernel Features -# -CONFIG_PREEMPT=y -CONFIG_NO_IDLE_HZ=y -CONFIG_HZ=100 -# CONFIG_AEABI is not set -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_NODES_SHIFT=2 -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -# CONFIG_LEDS is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -# CONFIG_ARTHUR is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_APM=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NETFILTER_XTABLES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -# CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -CONFIG_USB_IRDA=m -# CONFIG_SIGMATEL_FIR is not set -CONFIG_SA1100_FIR=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -# CONFIG_BT_HCIUSB is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -# CONFIG_IEEE80211_SOFTMAC is not set -CONFIG_WIRELESS_EXT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_OBSOLETE_CHIPS=y -CONFIG_MTD_SHARP=y - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_SA1100=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_ARLAN is not set -# CONFIG_WAVELAN is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_LOCOMO=y -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=m -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ELEKTOR is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_BITBANG is not set -CONFIG_SPI_LOCOMO=m - -# -# SPI Protocol Masters -# - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# Multimedia Capabilities Port drivers -# -CONFIG_MCP=y -CONFIG_MCP_SA11X0=y -CONFIG_MCP_UCB1200=y -CONFIG_MCP_UCB1200_TS=m - -# -# Multi-Function Devices -# - -# -# LED devices -# -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m - -# -# LED drivers -# -CONFIG_LEDS_LOCOMO=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -# CONFIG_LEDS_TRIGGER_IDE_DISK is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=m - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_PMS is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set - -# -# V4L USB devices -# -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set -# CONFIG_USB_DSBR is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_SA1100=y -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y -CONFIG_BACKLIGHT_LOCOMO=y - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_DUMMY=m -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# SoC audio support -# -# CONFIG_SND_SOC is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# HID Devices -# -CONFIG_HID=m - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -CONFIG_USB_USBNET_MII=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -CONFIG_USB_NET_CDC_SUBSET=m -# CONFIG_USB_ALI_M5632 is not set -# CONFIG_USB_AN2720 is not set -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -# CONFIG_USB_EPSON2888 is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -CONFIG_USB_SERIAL_AIRPRIME=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP2101=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_FUNSOFT=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_HP4X=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_OMNINET is not set -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set - -# -# MMC/SD Card support -# -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_MMC_BLOCK=m -# CONFIG_MMC_TIFM_SD is not set -CONFIG_MMC_SPI=m -CONFIG_MMC_UNSAFE_RESUME=y - - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set - -# -# RTC drivers -# -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SA1100=y -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# File systems -# -CONFIG_EXT2_FS=m -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_SQUASHFS_VMALLOC is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_LZO is not set -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_LZO=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y -# CONFIG_SHARPSL_RC is not set diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-htcuniversal b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-htcuniversal deleted file mode 100644 index 2b02621499..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-htcuniversal +++ /dev/null @@ -1,1281 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Wed Sep 26 17:55:32 2007 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -# CONFIG_PXA_SHARPSL is not set -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_EM_X270 is not set -# CONFIG_MACH_HX2750 is not set -CONFIG_MACH_HTCUNIVERSAL=y - -# -# HTC Universal support -# -CONFIG_HTCUNIVERSAL_CORE=y -CONFIG_HTCUNIVERSAL_UDC=y -CONFIG_HTCUNIVERSAL_POWER=y -CONFIG_HTCUNIVERSAL_BACKLIGHT=y -CONFIG_HTCUNIVERSAL_LCD=y -CONFIG_HTCUNIVERSAL_TS2=y -CONFIG_HTCUNIVERSAL_BUTTONS=y -CONFIG_HTCUNIVERSAL_BLUETOOTH=m -CONFIG_HTCUNIVERSAL_ASIC3_LEDS=y -CONFIG_HTCUNIVERSAL_PHONE=m -# CONFIG_HTCUNIVERSAL_AK4641 is not set -CONFIG_PXA27x=y -# CONFIG_PXA_KEYS is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_IWMMXT=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -CONFIG_CPU_FREQ_GOV_USERSPACE=y -# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_SUSPEND is not set -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_XTABLES is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=y - -# -# IrDA protocols -# -CONFIG_IRLAN=y -# CONFIG_IRNET is not set -CONFIG_IRCOMM=y -CONFIG_IRDA_ULTRA=y - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=y - -# -# Dongle support -# -# CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -CONFIG_PXA_FICP=y -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIVHCI is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=0 -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -# CONFIG_MTD_CHAR is not set -# CONFIG_MTD_BLKDEVS is not set -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_SHARP_SL is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -CONFIG_MTD_MTDRAM=m -CONFIG_MTDRAM_TOTAL_SIZE=4096 -CONFIG_MTDRAM_ERASE_SIZE=128 -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_NET_ETHERNET is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -CONFIG_ACX=m -CONFIG_ACX_MEM=y -# CONFIG_ACX_CS is not set -CONFIG_ACX_HTCUNIVERSAL=m -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_POWER is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_PXA27x=y -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_ASIC3=y -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=m -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=m -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -CONFIG_W1=y - -# -# 1-wire Bus Masters -# -# CONFIG_W1_MASTER_DS2482 is not set -CONFIG_W1_MASTER_DS1WM=y - -# -# 1-wire Slaves -# -# CONFIG_W1_SLAVE_THERM is not set -# CONFIG_W1_SLAVE_SMEM is not set -# CONFIG_W1_SLAVE_DS2433 is not set -CONFIG_W1_SLAVE_DS2760=y -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_PDA_POWER=y -CONFIG_APM_POWER=y -CONFIG_BATTERY_DS2760=y -# CONFIG_HWMON is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -CONFIG_HTC_ASIC3=y -CONFIG_HTC_ASIC3_DS1WM=y - -# -# Multi-Function Devices -# -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -# CONFIG_LEDS_GPIO is not set -CONFIG_LEDS_ASIC3=y - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y - -# -# Graphics support -# -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -CONFIG_FB_PXA_LCD_QVGA=y -# CONFIG_FB_PXA_LCD_VGA is not set -# CONFIG_FB_PXA_OVERLAY is not set -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -# CONFIG_SND_PXA2XX_AC97 is not set - -# -# System on Chip audio support -# -# CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_M66592 is not set -CONFIG_USB_GADGET_PXA27X=y -CONFIG_USB_PXA27X=y -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y - -# -# MMC/SD Host Controller Drivers -# -# CONFIG_MMC_PXA is not set -CONFIG_MMC_ASIC3=y -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_DEBUG=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_VM=y -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -# CONFIG_CRYPTO_CBC is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -CONFIG_CRYPTO_HW=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-hx2000 b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-hx2000 deleted file mode 100644 index ee05db4e5a..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-hx2000 +++ /dev/null @@ -1,1168 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc2 -# Mon Jan 1 01:49:04 2007 -# -CONFIG_ARM=y -# CONFIG_GENERIC_TIME is not set -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -# CONFIG_PXA_SHARPSL is not set -# CONFIG_MACH_TRIZEPS4 is not set -CONFIG_MACH_HX2750=y -CONFIG_PXA27x=y -CONFIG_PXA_SSP=y -CONFIG_PXA_KEYS=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -CONFIG_IWMMXT=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=y - -# -# Kernel Features -# -CONFIG_PREEMPT=y -CONFIG_NO_IDLE_HZ=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -CONFIG_PM_DEBUG=y -# CONFIG_DISABLE_CONSOLE_SUSPEND is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_APM=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -# CONFIG_IEEE80211_CRYPT_CCMP is not set -# CONFIG_IEEE80211_CRYPT_TKIP is not set -# CONFIG_IEEE80211_SOFTMAC is not set -CONFIG_WIRELESS_EXT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_SHARP_SL is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -CONFIG_TOUCHSCREEN_TSC2101=y -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# Multi-Function Devices -# -CONFIG_MFD_TSC2101=y - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -CONFIG_FB_PXA_LCD_QVGA=y -# CONFIG_FB_PXA_LCD_VGA is not set -# CONFIG_FB_PXA_OVERLAY is not set -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_DEVICE=y -CONFIG_BACKLIGHT_HX2750=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_BLOCK=y -CONFIG_MMC_PXA=y -# CONFIG_MMC_TIFM_SD is not set -CONFIG_MMC_UNSAFE_RESUME=y - - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set - -# -# RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SA1100=y -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_SQUASHFS_VMALLOC is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_TIMER_STATS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_MANAGER=m -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -CONFIG_CRYPTO_CRC32C=y -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y -# CONFIG_SHARPSL_RC is not set diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-poodle b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-poodle deleted file mode 100644 index 387b5e9bff..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-poodle +++ /dev/null @@ -1,1659 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.17 -# Mon Jul 10 23:38:56 2006 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_L7200 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_AT91RM9200 is not set - -# -# Intel PXA2xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -# CONFIG_MACH_HX2750 is not set -CONFIG_PXA_SHARPSL_25x=y -# CONFIG_PXA_SHARPSL_27x is not set -CONFIG_MACH_POODLE=y -# CONFIG_MACH_CORGI is not set -# CONFIG_MACH_SHEPHERD is not set -# CONFIG_MACH_HUSKY is not set -# CONFIG_MACH_TOSA is not set -CONFIG_PXA25x=y -# CONFIG_PXA_KEYS is not set -CONFIG_PXA_SSP=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -CONFIG_XSCALE_PMU=y -CONFIG_KEXEC=y -CONFIG_SHARP_LOCOMO=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARPSL_PM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=y - -# -# Kernel Features -# -CONFIG_PREEMPT=y -CONFIG_NO_IDLE_HZ=y -CONFIG_HZ=100 -# CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_PXA25x=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -# CONFIG_ARTHUR is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_APM=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NETFILTER_XTABLES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -# CONFIG_IP_NF_H323 is not set -CONFIG_IP_NF_QUEUE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -# CONFIG_IEEE80211_SOFTMAC is not set -CONFIG_WIRELESS_EXT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=y -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_LOCOMO=y -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_CORGI is not set -# CONFIG_KEYBOARD_SPITZ is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_CORGI=y -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multi-Function Devices -# - -# -# LED devices -# -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_LOCOMO=y -# CONFIG_LEDS_TOSA is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# - -# -# Video Capture Adapters -# -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set - -# -# Encoders and Decoders -# -# CONFIG_VIDEO_MSP3400 is not set -# CONFIG_VIDEO_CS53L32A is not set -# CONFIG_VIDEO_WM8775 is not set -# CONFIG_VIDEO_WM8739 is not set -# CONFIG_VIDEO_CX25840 is not set -# CONFIG_VIDEO_SAA711X is not set -# CONFIG_VIDEO_SAA7127 is not set -# CONFIG_VIDEO_UPD64031A is not set -# CONFIG_VIDEO_UPD64083 is not set - -# -# V4L USB devices -# -# CONFIG_VIDEO_EM28XX is not set -CONFIG_USB_DSBR=m -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -# CONFIG_USB_ET61X251 is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_W9968CF is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_MAESTRO is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_MACMODES is not set -CONFIG_FB_FIRMWARE_EDID=y -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_W100 is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -CONFIG_FONT_MINI_4x6=y -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_LOGO_OHAND_CLUT224 is not set -CONFIG_LOGO_OZ240_CLUT224=y -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set -CONFIG_BACKLIGHT_LOCOMO=y - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -# CONFIG_SND_PXA2XX_AC97 is not set - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# SoC audio support -# -CONFIG_SND_SOC=m - -# -# Soc Platforms -# - -# -# SoC Audio for the Intel PXA2xx -# -CONFIG_SND_PXA2xx_SOC=m -# CONFIG_SND_PXA2xx_SOC_MAINSTONE is not set -# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM8731 is not set -# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM8753 is not set -# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM8974 is not set -# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM9713 is not set -# CONFIG_SND_MAINSTONE_BASEBAND is not set -# CONFIG_SND_MAINSTONE_BLUETOOTH is not set -# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM9712 is not set -# CONFIG_SND_PXA2xx_SOC_CORGI is not set -# CONFIG_SND_PXA2xx_SOC_SPITZ is not set -CONFIG_SND_PXA2xx_SOC_POODLE=m -# CONFIG_SND_PXA2xx_SOC_TOSA is not set - -# -# Soc Codecs -# -# CONFIG_SND_SOC_AC97_CODEC is not set -CONFIG_SND_SOC_WM8731=m -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8772 is not set -# CONFIG_SND_SOC_WM8971 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM9713 is not set -# CONFIG_SND_SOC_WM9712 is not set -# CONFIG_SND_SOC_UDA1380 is not set -# CONFIG_SND_SOC_AK4535 is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -# CONFIG_USB_ACECAD is not set -CONFIG_USB_KBTAB=m -CONFIG_USB_POWERMATE=m -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -CONFIG_USB_XPAD=m -CONFIG_USB_ATI_REMOTE=m -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -# CONFIG_USB_ZD1201 is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_LED=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETSERVO=m -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m - -# -# MMC/SD Card support -# -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_BLOCK=y -CONFIG_MMC_PXA=y -CONFIG_MMC_UNSAFE_RESUME=y - - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y - -# -# RTC drivers -# -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SA1100=y -# CONFIG_RTC_DRV_TEST is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_SQUASHFS_VMALLOC is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_TIMER_STATS=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set -# CONFIG_FORCED_INLINING is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_SHARPSL_RC is not set diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-qemuarm b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-qemuarm deleted file mode 100644 index 35cf3f5b17..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-qemuarm +++ /dev/null @@ -1,1194 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.17 -# Sat Aug 26 22:45:02 2006 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_VECTORS_BASE=0xffff0000 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set -CONFIG_OBSOLETE_INTERMODULE=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -# CONFIG_BLK_DEV_IO_TRACE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -CONFIG_ARCH_VERSATILE=y -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_AT91RM9200 is not set - -# -# Versatile platform type -# -CONFIG_ARCH_VERSATILE_PB=y -# CONFIG_MACH_VERSATILE_AB is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_KEXEC is not set -CONFIG_ARM_VIC=y -CONFIG_ICST307=y - -# -# Bus support -# -CONFIG_ARM_AMBA=y -CONFIG_PCI=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -CONFIG_HZ=100 -# CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_LEDS=y -CONFIG_LEDS_TIMER=y -CONFIG_LEDS_CPU=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_APM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_GEOMETRY is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=51200 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_POWER is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_UINPUT is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_AMBAKMI=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multi-Function Devices -# - -# -# LED devices -# -CONFIG_NEW_LEDS=y -# CONFIG_LEDS_CLASS is not set - -# -# LED drivers -# - -# -# LED Triggers -# -# CONFIG_LEDS_TRIGGERS is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_MACMODES is not set -CONFIG_FB_FIRMWARE_EDID=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -CONFIG_FB_ARMCLCD=y -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -# CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -CONFIG_USB_WACOM=y -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_LD is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y - -# -# RTC drivers -# -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=y -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_TIMER_STATS=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_SHARPSL_RC is not set diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-qemux86 b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-qemux86 deleted file mode 100644 index e9eb83e2dd..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-qemux86 +++ /dev/null @@ -1,1568 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.17 -# Mon Oct 16 19:42:42 2006 -# -CONFIG_X86_32=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_X86=y -CONFIG_MMU=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_DMI=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -# CONFIG_IKCONFIG is not set -# CONFIG_CPUSETS is not set -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y -CONFIG_VM86=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor type and features -# -CONFIG_SMP=y -CONFIG_X86_PC=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_VOYAGER is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_BIGSMP is not set -# CONFIG_X86_VISWS is not set -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_ES7000 is not set -CONFIG_M386=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MGEODEGX1 is not set -# CONFIG_MGEODE_LX is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -CONFIG_X86_GENERIC=y -CONFIG_X86_L1_CACHE_SHIFT=7 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_X86_PPRO_FENCE=y -CONFIG_X86_F00F_BUG=y -CONFIG_X86_INTEL_USERCOPY=y -# CONFIG_HPET_TIMER is not set -CONFIG_NR_CPUS=8 -CONFIG_SCHED_SMT=y -CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_NONFATAL=y -CONFIG_X86_MCE_P4THERMAL=y -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_X86_REBOOTFIXUPS is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set - -# -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_SPARSEMEM_STATIC=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_EFI is not set -CONFIG_IRQBALANCE=y -# CONFIG_REGPARM is not set -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -CONFIG_PHYSICAL_START=0x100000 -# CONFIG_HOTPLUG_CPU is not set - -# -# Power management options (ACPI, APM) -# -CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# -CONFIG_ACPI=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_VIDEO=m -# CONFIG_ACPI_HOTKEY is not set -CONFIG_ACPI_FAN=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_THERMAL=y -# CONFIG_ACPI_ASUS is not set -CONFIG_ACPI_IBM=m -# CONFIG_ACPI_IBM_DOCK is not set -# CONFIG_ACPI_TOSHIBA is not set -CONFIG_ACPI_BLACKLIST_YEAR=0 -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_SYSTEM=y -CONFIG_X86_PM_TIMER=y -# CONFIG_ACPI_CONTAINER is not set - -# -# APM (Advanced Power Management) BIOS Support -# -# CONFIG_APM is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GOMMCONFIG is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -# CONFIG_PCIEPORTBUS is not set -# CONFIG_PCI_MSI is not set -CONFIG_ISA_DMA_API=y -CONFIG_ISA=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -# CONFIG_SCx200 is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -CONFIG_BINFMT_MISC=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NETFILTER_XTABLES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=y -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -# CONFIG_IP_NF_FTP is not set -# CONFIG_IP_NF_IRC is not set -# CONFIG_IP_NF_NETBIOS_NS is not set -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_PPTP is not set -# CONFIG_IP_NF_H323 is not set -CONFIG_IP_NF_QUEUE=y - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# -CONFIG_PNP=y -# CONFIG_PNP_DEBUG is not set - -# -# Protocols -# -# CONFIG_ISAPNP is not set -# CONFIG_PNPBIOS is not set -CONFIG_PNPACPI=y - -# -# Block devices -# -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=51200 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_CMD640=y -# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_DPT_I2O=m -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -# CONFIG_SCSI_SATA_SVW is not set -CONFIG_SCSI_ATA_PIIX=y -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_PDC_ADMA is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -CONFIG_SCSI_SATA_SX4=m -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -CONFIG_SCSI_SATA_SIS=m -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set -CONFIG_SCSI_SATA_INTEL_COMBINED=y -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -CONFIG_SCSI_IPR=m -# CONFIG_SCSI_IPR_TRACE is not set -# CONFIG_SCSI_IPR_DUMP is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_ULTRASTOR is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set -# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set -# CONFIG_IEEE1394_EXPORT_FULL_API is not set - -# -# Device Drivers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocol Drivers -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_NET_SB1000 is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -CONFIG_NET_ISA=y -# CONFIG_E2100 is not set -# CONFIG_EWRK3 is not set -# CONFIG_EEXPRESS is not set -# CONFIG_EEXPRESS_PRO is not set -# CONFIG_HPLAN_PLUS is not set -# CONFIG_HPLAN is not set -# CONFIG_LP486E is not set -# CONFIG_ETH16I is not set -CONFIG_NE2000=y -# CONFIG_ZNET is not set -# CONFIG_SEEQ8005 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -CONFIG_NE2K_PCI=y -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_POWER is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_PRINTER=y -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=y -# CONFIG_AGP_ALI is not set -# CONFIG_AGP_ATI is not set -# CONFIG_AGP_AMD is not set -# CONFIG_AGP_AMD64 is not set -CONFIG_AGP_INTEL=y -# CONFIG_AGP_NVIDIA is not set -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_SWORKS is not set -# CONFIG_AGP_VIA is not set -# CONFIG_AGP_EFFICEON is not set -CONFIG_DRM=y -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_I810 is not set -# CONFIG_DRM_I830 is not set -# CONFIG_DRM_I915 is not set -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_SIS is not set -# CONFIG_DRM_VIA is not set -# CONFIG_DRM_SAVAGE is not set -# CONFIG_MWAVE is not set -# CONFIG_CS5535_GPIO is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HPET is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_HDAPS is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# -# CONFIG_IBM_ASM is not set - -# -# Multi-Function Devices -# - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_MACMODES is not set -CONFIG_FB_FIRMWARE_EDID=y -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ARC is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -CONFIG_FB_VGA16=y -CONFIG_FB_VESA=y -# CONFIG_FB_VESA_STD is not set -CONFIG_FB_VESA_TNG=y -CONFIG_FB_VESA_DEFAULT_MODE="640x480-32@60" -CONFIG_VIDEO_SELECT=y -# CONFIG_FB_HGA is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I810 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_GEODE is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_SEQUENCER=y -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_AC97_BUS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ISA devices -# -# CONFIG_SND_ADLIB is not set -# CONFIG_SND_AD1816A is not set -# CONFIG_SND_AD1848 is not set -# CONFIG_SND_ALS100 is not set -# CONFIG_SND_AZT2320 is not set -# CONFIG_SND_CMI8330 is not set -# CONFIG_SND_CS4231 is not set -# CONFIG_SND_CS4232 is not set -# CONFIG_SND_CS4236 is not set -# CONFIG_SND_DT019X is not set -# CONFIG_SND_ES968 is not set -# CONFIG_SND_ES1688 is not set -# CONFIG_SND_ES18XX is not set -# CONFIG_SND_GUSCLASSIC is not set -# CONFIG_SND_GUSEXTREME is not set -# CONFIG_SND_GUSMAX is not set -# CONFIG_SND_INTERWAVE is not set -# CONFIG_SND_INTERWAVE_STB is not set -# CONFIG_SND_OPL3SA2 is not set -# CONFIG_SND_OPTI92X_AD1848 is not set -# CONFIG_SND_OPTI92X_CS4231 is not set -# CONFIG_SND_OPTI93X is not set -# CONFIG_SND_MIRO is not set -# CONFIG_SND_SB8 is not set -# CONFIG_SND_SB16 is not set -# CONFIG_SND_SBAWE is not set -# CONFIG_SND_SGALAXY is not set -# CONFIG_SND_SSCAPE is not set -# CONFIG_SND_WAVEFRONT is not set - -# -# PCI devices -# -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5535AUDIO is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set - -# -# SoC audio support -# -# CONFIG_SND_SOC is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_UHCI_HCD=y -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -CONFIG_USB_WACOM=y -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGETKIT is not set -CONFIG_USB_PHIDGETSERVO=m -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# -# CONFIG_EDAC is not set - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=y -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=y -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Instrumentation Support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -# CONFIG_KPROBES is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set -CONFIG_EARLY_PRINTK=y -CONFIG_STACK_BACKTRACE_COLS=2 -CONFIG_X86_FIND_SMP_CONFIG=y -CONFIG_X86_MPPARSE=y -CONFIG_DOUBLEFAULT=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -CONFIG_KTIME_SCALAR=y -# CONFIG_SHARPSL_RC is not set diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-spitz b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-spitz deleted file mode 100644 index 8e044e6a14..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-spitz +++ /dev/null @@ -1,1690 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Tue Aug 28 22:32:38 2007 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_EM_X270 is not set -# CONFIG_MACH_HX2750 is not set -# CONFIG_PXA_SHARPSL_25x is not set -CONFIG_PXA_SHARPSL_27x=y -CONFIG_MACH_AKITA=y -CONFIG_MACH_SPITZ=y -CONFIG_MACH_BORZOI=y -CONFIG_PXA27x=y -CONFIG_PXA_SHARP_Cxx00=y -CONFIG_PXA_SSP=y -# CONFIG_PXA_KEYS is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_IWMMXT=y -CONFIG_XSCALE_PMU=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARPSL_PM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=y - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/hda1 rootfstype=ext3 rootdelay=1 rw fbcon=rotate:1 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NETFILTER_XTABLES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -# CONFIG_IEEE80211_SOFTMAC is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=m -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=y -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_DELAY is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# -CONFIG_WLAN_PRE80211=y -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set -CONFIG_WLAN_80211=y -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_LIBERTAS is not set -CONFIG_HERMES=m -# CONFIG_ATMEL is not set -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -CONFIG_AIRO_CS=m -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET_MII=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_CORGI is not set -CONFIG_KEYBOARD_SPITZ=y -# CONFIG_KEYBOARD_PXA27x is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_CORGI=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_HWMON is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multi-Function Devices -# -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_SPITZ=y -# CONFIG_LEDS_TOSA is not set -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_TUNER_TEA5761 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -CONFIG_FB_PXA_LCD_QVGA=y -# CONFIG_FB_PXA_LCD_VGA is not set -CONFIG_FB_PXA_OVERLAY=y -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_W100 is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_SEQUENCER_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_DEBUG=y -# CONFIG_SND_DEBUG_DETECT is not set -# CONFIG_SND_PCM_XRUN_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -CONFIG_SND_PXA2XX_PCM=m -CONFIG_SND_PXA2XX_AC97=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -# CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_I2S=m -CONFIG_SND_PXA2XX_SOC_SPITZ=m - -# -# SoC Audio support for SuperH -# -CONFIG_SND_SOC_WM8750=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_M66592 is not set -CONFIG_USB_GADGET_PXA27X=y -CONFIG_USB_PXA27X=m -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_PXA=y -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_SQUASHFS_VMALLOC is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_LZO is not set -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-tosa b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-tosa deleted file mode 100644 index 74fc076608..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-tosa +++ /dev/null @@ -1,1614 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc5-git5 -# Tue Mar 14 09:05:26 2006 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_MTD_XIP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -CONFIG_SLAB=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_AT91RM9200 is not set - -# -# Intel PXA2xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -# CONFIG_MACH_HX2750 is not set -CONFIG_PXA_SHARPSL_25x=y -# CONFIG_PXA_SHARPSL_27x is not set -# CONFIG_MACH_POODLE is not set -# CONFIG_MACH_CORGI is not set -# CONFIG_MACH_SHEPHERD is not set -# CONFIG_MACH_HUSKY is not set -CONFIG_MACH_TOSA=y -CONFIG_PXA25x=y -# CONFIG_PXA_KEYS is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -CONFIG_XSCALE_PMU=y -CONFIG_KEXEC=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARPSL_PM=y -CONFIG_SHARP_SCOOP=y -CONFIG_TOSHIBA_TC6393XB=y - -# -# Bus support -# - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=y - -# -# Kernel Features -# -CONFIG_PREEMPT=y -CONFIG_NO_IDLE_HZ=y -# CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -# CONFIG_XIP_KERNEL is not set - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PXA25x=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -# CONFIG_ARTHUR is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_APM=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NETFILTER_XTABLES is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_TMIO=y -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_SHARPSL is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_CORGI is not set -# CONFIG_KEYBOARD_SPITZ is not set -CONFIG_KEYBOARD_TOSA=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_CORGI is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -CONFIG_TOUCHSCREEN_WM97XX=y -# CONFIG_TOUCHSCREEN_WM9705 is not set -CONFIG_TOUCHSCREEN_WM9712=y -# CONFIG_TOUCHSCREEN_WM9713 is not set -# CONFIG_TOUCHSCREEN_WM97XX_PXA is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multi-Function Devices -# - -# -# LED devices -# -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TOSA=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_IDE_DISK=y - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video For Linux -# - -# -# Video Adapters -# -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_VIDEO_AUDIO_DECODER is not set -# CONFIG_VIDEO_DECODER is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_MAESTRO is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_PXA is not set -# CONFIG_FB_W100 is not set -CONFIG_FB_TMIO=y -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_DEVICE=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CORGI=y -# CONFIG_BACKLIGHT_HP680 is not set - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_BUS=y -CONFIG_SND_DUMMY=m -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -# CONFIG_SND_PXA2XX_AC97 is not set - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m - -# -# PCMCIA devices -# - -# -# SoC audio support -# -CONFIG_SND_SOC=y - -# -# Soc Platforms -# - -# -# SoC Audio for the Intel PXA2xx -# -CONFIG_SND_PXA2xx_SOC=y -CONFIG_SND_PXA2xx_SOC_AC97=y -# CONFIG_SND_PXA2xx_SOC_MAINSTONE is not set -# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM8753 is not set -# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM9713 is not set -# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM9712 is not set -# CONFIG_SND_PXA2xx_SOC_CORGI is not set -# CONFIG_SND_PXA2xx_SOC_SPITZ is not set -CONFIG_SND_PXA2xx_SOC_TOSA=y - -# -# Soc Codecs -# -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8772 is not set -# CONFIG_SND_SOC_WM8971 is not set -# CONFIG_SND_SOC_WM9713 is not set -CONFIG_SND_SOC_WM9712=y -# CONFIG_SND_SOC_UDA1380 is not set -# CONFIG_SND_SOC_AK4535 is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m - -# -# USB Device Class drivers -# -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -# CONFIG_USB_ACECAD is not set -CONFIG_USB_KBTAB=m -CONFIG_USB_POWERMATE=m -CONFIG_USB_MTOUCH=m -# CONFIG_USB_ITMTOUCH is not set -CONFIG_USB_EGALAX=m -# CONFIG_USB_YEALINK is not set -CONFIG_USB_XPAD=m -CONFIG_USB_ATI_REMOTE=m -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m - -# -# USB Multimedia devices -# -CONFIG_USB_DABUSB=m -CONFIG_USB_VICAM=m -CONFIG_USB_DSBR=m -# CONFIG_USB_ET61X251 is not set -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_PWC is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_ZAURUS is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_LED=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETSERVO=m -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m - -# -# MMC/SD Card support -# -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_BLOCK=y -CONFIG_MMC_PXA=y -CONFIG_MMC_UNSAFE_RESUME=y - -# -# Real Time Clock -# -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y - -# -# RTC drivers -# -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -CONFIG_RTC_DRV_SA1100=y -# CONFIG_RTC_DRV_TEST is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_SQUASHFS_VMALLOC is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_TIMER_STATS=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_VM is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_WAITQ is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_GENERIC_ALLOCATOR=y -# CONFIG_SHARPSL_RC is not set diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-zylonite b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-zylonite deleted file mode 100644 index 0321704a1f..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/defconfig-zylonite +++ /dev/null @@ -1,1457 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Tue Sep 25 15:57:10 2007 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -# CONFIG_EMBEDDED is not set -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx/PXA3xx Implementations -# - -# -# Supported PXA3xx Processor Variants -# -CONFIG_CPU_PXA300=y -CONFIG_CPU_PXA310=y -CONFIG_CPU_PXA320=y -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -# CONFIG_PXA_SHARPSL is not set -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_EM_X270 is not set -CONFIG_MACH_ZYLONITE=y -# CONFIG_MACH_HX2750 is not set -# CONFIG_MACH_HTCUNIVERSAL is not set -CONFIG_PXA3xx=y - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSC3=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_IO_36=y - -# -# Processor Features -# -# CONFIG_ARM_THUMB is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_IWMMXT=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -# CONFIG_PREEMPT is not set -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,38400 root=/dev/mtdblock2 rootfstype=jffs2 mem=64M dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=y - -# -# IrDA protocols -# -# CONFIG_IRLAN is not set -# CONFIG_IRCOMM is not set -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -# CONFIG_PXA_FICP is not set -# CONFIG_MCS_FIR is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_SHARP_SL is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_SHARPSL is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -CONFIG_USB_USBNET=y -# CONFIG_USB_NET_AX8817X is not set -CONFIG_USB_NET_CDCETHER=y -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_NET1080 is not set -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -CONFIG_USB_NET_CDC_SUBSET=y -# CONFIG_USB_ALI_M5632 is not set -# CONFIG_USB_AN2720 is not set -# CONFIG_USB_BELKIN is not set -CONFIG_USB_ARMLINUX=y -# CONFIG_USB_EPSON2888 is not set -# CONFIG_USB_KC2190 is not set -# CONFIG_USB_NET_ZAURUS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=y -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_POWER is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -CONFIG_W1=y - -# -# 1-wire Bus Masters -# -# CONFIG_W1_MASTER_DS2490 is not set -# CONFIG_W1_MASTER_DS2482 is not set -# CONFIG_W1_MASTER_DS1WM is not set - -# -# 1-wire Slaves -# -# CONFIG_W1_SLAVE_THERM is not set -# CONFIG_W1_SLAVE_SMEM is not set -# CONFIG_W1_SLAVE_DS2433 is not set -# CONFIG_W1_SLAVE_DS2760 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multi-Function Devices -# -# CONFIG_NEW_LEDS is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -# CONFIG_TUNER_TEA5761 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -# CONFIG_FB_PXA_LCD_QVGA is not set -CONFIG_FB_PXA_LCD_VGA=y -CONFIG_FB_PXA_OVERLAY=y -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_LOGO_OHAND_CLUT224 is not set -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -# CONFIG_SND_PXA2XX_AC97 is not set - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# -# CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=y -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -CONFIG_USB_GADGET_M66592=y -CONFIG_USB_M66592=y -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y -# CONFIG_USB_ZERO is not set -# CONFIG_USB_ETH is not set -# CONFIG_USB_GADGETFS is not set -CONFIG_USB_FILE_STORAGE=y -# CONFIG_USB_FILE_STORAGE_TEST is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_UNSAFE_RESUME is not set - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_PXA=y -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -# CONFIG_ROOT_NFS is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -# CONFIG_OPROFILE is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -CONFIG_CRYPTO_HW=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/hostap-monitor-mode.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/hostap-monitor-mode.patch deleted file mode 100644 index 641fd19e50..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/hostap-monitor-mode.patch +++ /dev/null @@ -1,209 +0,0 @@ -This is a patch that I've been maintaining for a few years, and I'd -really like to see it added to the mainstream zaurus kernel so I can -finally stop distributing my own. - -This patch only effects the card while in monitor mode, and does not -cause any known stability issues. - -http://patches.aircrack-ng.org/hostap-kernel-2.6.18.patch - -Rick Farina (Zero_Chaos) - -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c 2006-09-21 01:30:18.000000000 -0400 -@@ -69,6 +69,9 @@ - iface = netdev_priv(dev); - local = iface->local; - -+ if (local->iw_mode == IW_MODE_MONITOR) -+ goto xmit; -+ - if (skb->len < ETH_HLEN) { - printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb " - "(len=%d)\n", dev->name, skb->len); -@@ -234,6 +237,7 @@ - memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN); - } - -+xmit: - iface->stats.tx_packets++; - iface->stats.tx_bytes += skb->len; - -@@ -404,8 +408,6 @@ - } - - if (skb->len < 24) { -- printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb " -- "(len=%d)\n", dev->name, skb->len); - ret = 0; - iface->stats.tx_dropped++; - goto fail; -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.orig -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.rej -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c 2006-09-21 01:30:18.000000000 -0400 -@@ -1005,6 +1005,35 @@ - return fid; - } - -+static int prism2_monitor_enable(struct net_device *dev) -+{ -+ if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, 5)) { -+ printk(KERN_DEBUG "Port type setting for monitor mode " -+ "failed\n"); -+ return -EOPNOTSUPP; -+ } -+ -+ if (hfa384x_cmd(dev, HFA384X_CMDCODE_TEST | (0x0a << 8), -+ 0, NULL, NULL)) { -+ printk(KERN_DEBUG "Could not enter testmode 0x0a\n"); -+ return -EOPNOTSUPP; -+ } -+ -+ if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, -+ HFA384X_WEPFLAGS_PRIVACYINVOKED | -+ HFA384X_WEPFLAGS_HOSTENCRYPT | -+ HFA384X_WEPFLAGS_HOSTDECRYPT)) { -+ printk(KERN_DEBUG "WEP flags setting failed\n"); -+ return -EOPNOTSUPP; -+ } -+ -+ if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, 1)) { -+ printk(KERN_DEBUG "Could not set promiscuous mode\n"); -+ return -EOPNOTSUPP; -+ } -+ -+ return 0; -+} - - static int prism2_reset_port(struct net_device *dev) - { -@@ -1031,6 +1060,10 @@ - "port\n", dev->name); - } - -+ if (local->iw_mode == IW_MODE_MONITOR) -+ /* force mode 0x0a after port 0 reset */ -+ return prism2_monitor_enable(dev); -+ - /* It looks like at least some STA firmware versions reset - * fragmentation threshold back to 2346 after enable command. Restore - * the configured value, if it differs from this default. */ -@@ -1466,6 +1499,10 @@ - return 1; - } - -+ if (local->iw_mode == IW_MODE_MONITOR) -+ /* force mode 0x0a after port 0 reset */ -+ prism2_monitor_enable(dev); -+ - local->hw_ready = 1; - local->hw_reset_tries = 0; - local->hw_resetting = 0; -@@ -3156,6 +3193,7 @@ - local->func->hw_config = prism2_hw_config; - local->func->hw_reset = prism2_hw_reset; - local->func->hw_shutdown = prism2_hw_shutdown; -+ local->func->monitor_enable = prism2_monitor_enable; - local->func->reset_port = prism2_reset_port; - local->func->schedule_reset = prism2_schedule_reset; - #ifdef PRISM2_DOWNLOAD_SUPPORT -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_hw.c.orig -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c 2006-09-21 01:30:18.000000000 -0400 -@@ -1104,33 +1104,7 @@ - - printk(KERN_DEBUG "Enabling monitor mode\n"); - hostap_monitor_set_type(local); -- -- if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, -- HFA384X_PORTTYPE_PSEUDO_IBSS)) { -- printk(KERN_DEBUG "Port type setting for monitor mode " -- "failed\n"); -- return -EOPNOTSUPP; -- } -- -- /* Host decrypt is needed to get the IV and ICV fields; -- * however, monitor mode seems to remove WEP flag from frame -- * control field */ -- if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, -- HFA384X_WEPFLAGS_HOSTENCRYPT | -- HFA384X_WEPFLAGS_HOSTDECRYPT)) { -- printk(KERN_DEBUG "WEP flags setting failed\n"); -- return -EOPNOTSUPP; -- } -- -- if (local->func->reset_port(dev) || -- local->func->cmd(dev, HFA384X_CMDCODE_TEST | -- (HFA384X_TEST_MONITOR << 8), -- 0, NULL, NULL)) { -- printk(KERN_DEBUG "Setting monitor mode failed\n"); -- return -EOPNOTSUPP; -- } -- -- return 0; -+ return local->func->reset_port(dev); - } - - -@@ -1199,7 +1173,7 @@ - local->iw_mode = *mode; - - if (local->iw_mode == IW_MODE_MONITOR) -- hostap_monitor_mode_enable(local); -+ return hostap_monitor_mode_enable(local); - else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && - !local->fw_encrypt_ok) { - printk(KERN_DEBUG "%s: defaulting to host-based encryption as " -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c 2006-09-21 01:30:18.000000000 -0400 -@@ -331,7 +331,7 @@ - if (local->iw_mode == IW_MODE_REPEAT) - return HFA384X_PORTTYPE_WDS; - if (local->iw_mode == IW_MODE_MONITOR) -- return HFA384X_PORTTYPE_PSEUDO_IBSS; -+ return 5; /*HFA384X_PORTTYPE_PSEUDO_IBSS;*/ - return HFA384X_PORTTYPE_HOSTAP; - } - -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_main.c.orig -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c 2006-09-21 01:30:18.000000000 -0400 -@@ -48,6 +48,8 @@ - { 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID }, - /* Samsung MagicLAN SWL-2210P */ - { 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID }, -+ /* NETGEAR MA311 */ -+ { 0x1385, 0x3872, PCI_ANY_ID, PCI_ANY_ID }, - { 0 } - }; - -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_pci.c.orig -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c 2006-09-21 01:30:18.000000000 -0400 -@@ -101,6 +101,7 @@ - { 0xc250, 0x0002 } /* EMTAC A2424i */, - { 0xd601, 0x0002 } /* Z-Com XI300 */, - { 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */, -+ { 0xd601, 0x0010 } /* Zcomax XI-325H 100mW */, - { 0, 0} - }; - -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_plx.c.orig -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h 2006-09-21 01:30:18.000000000 -0400 -@@ -575,6 +575,7 @@ - int (*hw_config)(struct net_device *dev, int initial); - void (*hw_reset)(struct net_device *dev); - void (*hw_shutdown)(struct net_device *dev, int no_disable); -+ int (*monitor_enable)(struct net_device *dev); - int (*reset_port)(struct net_device *dev); - void (*schedule_reset)(local_info_t *local); - int (*download)(local_info_t *local, diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/htcuni-acx.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/htcuni-acx.patch deleted file mode 100644 index 769674c935..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/htcuni-acx.patch +++ /dev/null @@ -1,33526 +0,0 @@ ---- - drivers/net/wireless/Kconfig | 31 - drivers/net/wireless/Makefile | 2 - drivers/net/wireless/acx/Kconfig | 113 - drivers/net/wireless/acx/Makefile | 21 - drivers/net/wireless/acx/acx.h | 14 - drivers/net/wireless/acx/acx_config.h | 50 - drivers/net/wireless/acx/acx_func.h | 710 ++ - drivers/net/wireless/acx/acx_hw.h | 18 - drivers/net/wireless/acx/acx_struct.h | 2114 ++++++++ - drivers/net/wireless/acx/common.c | 7388 ++++++++++++++++++++++++++++ - drivers/net/wireless/acx/conv.c | 504 + - drivers/net/wireless/acx/cs.c | 5703 +++++++++++++++++++++ - drivers/net/wireless/acx/htcsable_acx.c | 118 - drivers/net/wireless/acx/htcuniversal_acx.c | 108 - drivers/net/wireless/acx/hx4700_acx.c | 108 - drivers/net/wireless/acx/ioctl.c | 2748 ++++++++++ - drivers/net/wireless/acx/mem.c | 5363 ++++++++++++++++++++ - drivers/net/wireless/acx/pci.c | 4234 ++++++++++++++++ - drivers/net/wireless/acx/rx3000_acx.c | 110 - drivers/net/wireless/acx/setrate.c | 213 - drivers/net/wireless/acx/usb.c | 1922 +++++++ - drivers/net/wireless/acx/wlan.c | 424 + - drivers/net/wireless/acx/wlan_compat.h | 260 - drivers/net/wireless/acx/wlan_hdr.h | 497 + - drivers/net/wireless/acx/wlan_mgmt.h | 582 ++ - 25 files changed, 33355 insertions(+) - -Index: linux-2.6.22/drivers/net/wireless/acx/acx_config.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/acx_config.h 2007-08-23 18:46:40.000000000 +0200 -@@ -0,0 +1,50 @@ -+#define ACX_RELEASE "v0.3.36" -+ -+/* -+ * Test out all the channels in reg domain 0x10 -+ */ -+#define ACX_ALLOW_ALLCHANNELS -+ -+/* set to 0 if you don't want any debugging code to be compiled in */ -+/* set to 1 if you want some debugging */ -+/* set to 2 if you want extensive debug log */ -+#define ACX_DEBUG 0 -+ -+/* -+ * Since we'll be changing channels a lot -+#define ACX_DEFAULT_MSG (L_ASSOC|L_INIT) -+*/ -+#define ACX_DEFAULT_MSG (L_ASSOC|L_INIT) -+ -+/* assume 32bit I/O width -+ * (16bit is also compatible with Compact Flash) */ -+#define ACX_IO_WIDTH 32 -+ -+/* Set this to 1 if you want monitor mode to use -+ * phy header. Currently it is not useful anyway since we -+ * don't know what useful info (if any) is in phy header. -+ * If you want faster/smaller code, say 0 here */ -+#define WANT_PHY_HDR 0 -+ -+/* whether to do Tx descriptor cleanup in softirq (i.e. not in IRQ -+ * handler) or not. Note that doing it later does slightly increase -+ * system load, so still do that stuff in the IRQ handler for now, -+ * even if that probably means worse latency */ -+#define TX_CLEANUP_IN_SOFTIRQ 0 -+ -+/* if you want very experimental 802.11 power save mode features */ -+#define POWER_SAVE_80211 0 -+ -+/* if you want very early packet fragmentation bits and pieces */ -+#define ACX_FRAGMENTATION 0 -+ -+/* Locking: */ -+/* very talkative */ -+/* #define PARANOID_LOCKING 1 */ -+/* normal (use when bug-free) */ -+#define DO_LOCKING 1 -+/* else locking is disabled! */ -+ -+/* 0 - normal mode */ -+/* 1 - development/debug: probe for IEs on modprobe */ -+#define CMD_DISCOVERY 0 -Index: linux-2.6.22/drivers/net/wireless/acx/acx_func.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/acx_func.h 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,710 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+ -+/*********************************************************************** -+** LOGGING -+** -+** - Avoid SHOUTING needlessly. Avoid excessive verbosity. -+** Gradually remove messages which are old debugging aids. -+** -+** - Use printk() for messages which are to be always logged. -+** Supply either 'acx:' or ':' prefix so that user -+** can figure out who's speaking among other kernel chatter. -+** acx: is for general issues (e.g. "acx: no firmware image!") -+** while : is related to a particular device -+** (think about multi-card setup). Double check that message -+** is not confusing to the average user. -+** -+** - use printk KERN_xxx level only if message is not a WARNING -+** but is INFO, ERR etc. -+** -+** - Use printk_ratelimited() for messages which may flood -+** (e.g. "rx DUP pkt!"). -+** -+** - Use log() for messages which may be omitted (and they -+** _will_ be omitted in non-debug builds). Note that -+** message levels may be disabled at compile-time selectively, -+** thus select them wisely. Example: L_DEBUG is the lowest -+** (most likely to be compiled out) -> use for less important stuff. -+** -+** - Do not print important stuff with log(), or else people -+** will never build non-debug driver. -+** -+** Style: -+** hex: capital letters, zero filled (e.g. 0x02AC) -+** str: dont start from capitals, no trailing periods ("tx: queue is stopped") -+*/ -+#if ACX_DEBUG > 1 -+ -+void log_fn_enter(const char *funcname); -+void log_fn_exit(const char *funcname); -+void log_fn_exit_v(const char *funcname, int v); -+ -+#define FN_ENTER \ -+ do { \ -+ if (unlikely(acx_debug & L_FUNC)) { \ -+ log_fn_enter(__func__); \ -+ } \ -+ } while (0) -+ -+#define FN_EXIT1(v) \ -+ do { \ -+ if (unlikely(acx_debug & L_FUNC)) { \ -+ log_fn_exit_v(__func__, v); \ -+ } \ -+ } while (0) -+#define FN_EXIT0 \ -+ do { \ -+ if (unlikely(acx_debug & L_FUNC)) { \ -+ log_fn_exit(__func__); \ -+ } \ -+ } while (0) -+ -+#else -+ -+#define FN_ENTER -+#define FN_EXIT1(v) -+#define FN_EXIT0 -+ -+#endif /* ACX_DEBUG > 1 */ -+ -+ -+#if ACX_DEBUG -+ -+#define log(chan, args...) \ -+ do { \ -+ if (acx_debug & (chan)) \ -+ printk(KERN_DEBUG args); \ -+ } while (0) -+#define printk_ratelimited(args...) printk(args) -+ -+#else /* Non-debug build: */ -+ -+#define log(chan, args...) -+/* Standard way of log flood prevention */ -+#define printk_ratelimited(args...) \ -+do { \ -+ if (printk_ratelimit()) \ -+ printk(args); \ -+} while (0) -+ -+#endif /* ACX_DEBUG */ -+ -+void acx_print_mac(const char *head, const u8 *mac, const char *tail); -+ -+/* Optimized out to nothing in non-debug build */ -+static inline void -+acxlog_mac(int level, const char *head, const u8 *mac, const char *tail) -+{ -+ if (acx_debug & level) { -+ acx_print_mac(head, mac, tail); -+ } -+} -+ -+ -+/*********************************************************************** -+** MAC address helpers -+*/ -+static inline void -+MAC_COPY(u8 *mac, const u8 *src) -+{ -+ *(u32*)mac = *(u32*)src; -+ ((u16*)mac)[2] = ((u16*)src)[2]; -+ /* kernel's memcpy will do the same: memcpy(dst, src, ETH_ALEN); */ -+} -+ -+static inline void -+MAC_FILL(u8 *mac, u8 val) -+{ -+ memset(mac, val, ETH_ALEN); -+} -+ -+static inline void -+MAC_BCAST(u8 *mac) -+{ -+ ((u16*)mac)[2] = *(u32*)mac = -1; -+} -+ -+static inline void -+MAC_ZERO(u8 *mac) -+{ -+ ((u16*)mac)[2] = *(u32*)mac = 0; -+} -+ -+static inline int -+mac_is_equal(const u8 *a, const u8 *b) -+{ -+ /* can't beat this */ -+ return memcmp(a, b, ETH_ALEN) == 0; -+} -+ -+static inline int -+mac_is_bcast(const u8 *mac) -+{ -+ /* AND together 4 first bytes with sign-extended 2 last bytes -+ ** Only bcast address gives 0xffffffff. +1 gives 0 */ -+ return ( *(s32*)mac & ((s16*)mac)[2] ) + 1 == 0; -+} -+ -+static inline int -+mac_is_zero(const u8 *mac) -+{ -+ return ( *(u32*)mac | ((u16*)mac)[2] ) == 0; -+} -+ -+static inline int -+mac_is_directed(const u8 *mac) -+{ -+ return (mac[0] & 1)==0; -+} -+ -+static inline int -+mac_is_mcast(const u8 *mac) -+{ -+ return (mac[0] & 1) && !mac_is_bcast(mac); -+} -+ -+#define MACSTR "%02X:%02X:%02X:%02X:%02X:%02X" -+#define MAC(bytevector) \ -+ ((unsigned char *)bytevector)[0], \ -+ ((unsigned char *)bytevector)[1], \ -+ ((unsigned char *)bytevector)[2], \ -+ ((unsigned char *)bytevector)[3], \ -+ ((unsigned char *)bytevector)[4], \ -+ ((unsigned char *)bytevector)[5] -+ -+ -+/*********************************************************************** -+** Random helpers -+*/ -+#define TO_STRING(x) #x -+#define STRING(x) TO_STRING(x) -+ -+#define CLEAR_BIT(val, mask) ((val) &= ~(mask)) -+#define SET_BIT(val, mask) ((val) |= (mask)) -+ -+/* undefined if v==0 */ -+static inline unsigned int -+lowest_bit(u16 v) -+{ -+ unsigned int n = 0; -+ while (!(v & 0xf)) { v>>=4; n+=4; } -+ while (!(v & 1)) { v>>=1; n++; } -+ return n; -+} -+ -+/* undefined if v==0 */ -+static inline unsigned int -+highest_bit(u16 v) -+{ -+ unsigned int n = 0; -+ while (v>0xf) { v>>=4; n+=4; } -+ while (v>1) { v>>=1; n++; } -+ return n; -+} -+ -+/* undefined if v==0 */ -+static inline int -+has_only_one_bit(u16 v) -+{ -+ return ((v-1) ^ v) >= v; -+} -+ -+ -+static inline int -+is_hidden_essid(char *essid) -+{ -+ return (('\0' == essid[0]) || -+ ((' ' == essid[0]) && ('\0' == essid[1]))); -+} -+ -+/*********************************************************************** -+** LOCKING -+** We have adev->sem and adev->lock. -+** -+** We employ following naming convention in order to get locking right: -+** -+** acx_e_xxxx - external entry points called from process context. -+** It is okay to sleep. adev->sem is to be taken on entry. -+** acx_i_xxxx - external entry points possibly called from atomic context. -+** Sleeping is not allowed (and thus down(sem) is not legal!) -+** acx_s_xxxx - potentially sleeping functions. Do not ever call under lock! -+** acx_l_xxxx - functions which expect lock to be already taken. -+** rest - non-sleeping functions which do not require locking -+** but may be run under lock -+** -+** A small number of local helpers do not have acx_[eisl]_ prefix. -+** They are always close to caller and are to be reviewed locally. -+** -+** Theory of operation: -+** -+** All process-context entry points (_e_ functions) take sem -+** immediately. IRQ handler and other 'atomic-context' entry points -+** (_i_ functions) take lock immediately on entry, but dont take sem -+** because that might sleep. -+** -+** Thus *all* code is either protected by sem or lock, or both. -+** -+** Code which must not run concurrently with IRQ takes lock. -+** Such code is marked with _l_. -+** -+** This results in the following rules of thumb useful in code review: -+** -+** + If a function calls _s_ fn, it must be an _s_ itself. -+** + You can call _l_ fn only (a) from another _l_ fn -+** or (b) from _s_, _e_ or _i_ fn by taking lock, calling _l_, -+** and dropping lock. -+** + All IRQ code runs under lock. -+** + Any _s_ fn is running under sem. -+** + Code under sem can race only with IRQ code. -+** + Code under sem+lock cannot race with anything. -+*/ -+ -+/* These functions *must* be inline or they will break horribly on SPARC, due -+ * to its weird semantics for save/restore flags */ -+ -+#if defined(PARANOID_LOCKING) /* Lock debugging */ -+ -+void acx_lock_debug(acx_device_t *adev, const char* where); -+void acx_unlock_debug(acx_device_t *adev, const char* where); -+void acx_down_debug(acx_device_t *adev, const char* where); -+void acx_up_debug(acx_device_t *adev, const char* where); -+void acx_lock_unhold(void); -+void acx_sem_unhold(void); -+ -+static inline void -+acx_lock_helper(acx_device_t *adev, unsigned long *fp, const char* where) -+{ -+ acx_lock_debug(adev, where); -+ spin_lock_irqsave(&adev->lock, *fp); -+} -+static inline void -+acx_unlock_helper(acx_device_t *adev, unsigned long *fp, const char* where) -+{ -+ acx_unlock_debug(adev, where); -+ spin_unlock_irqrestore(&adev->lock, *fp); -+} -+static inline void -+acx_down_helper(acx_device_t *adev, const char* where) -+{ -+ acx_down_debug(adev, where); -+} -+static inline void -+acx_up_helper(acx_device_t *adev, const char* where) -+{ -+ acx_up_debug(adev, where); -+} -+#define acx_lock(adev, flags) acx_lock_helper(adev, &(flags), __FILE__ ":" STRING(__LINE__)) -+#define acx_unlock(adev, flags) acx_unlock_helper(adev, &(flags), __FILE__ ":" STRING(__LINE__)) -+#define acx_sem_lock(adev) acx_down_helper(adev, __FILE__ ":" STRING(__LINE__)) -+#define acx_sem_unlock(adev) acx_up_helper(adev, __FILE__ ":" STRING(__LINE__)) -+ -+#elif defined(DO_LOCKING) -+ -+#define acx_lock(adev, flags) spin_lock_irqsave(&adev->lock, flags) -+#define acx_unlock(adev, flags) spin_unlock_irqrestore(&adev->lock, flags) -+#define acx_sem_lock(adev) down(&adev->sem) -+#define acx_sem_unlock(adev) up(&adev->sem) -+#define acx_lock_unhold() ((void)0) -+#define acx_sem_unhold() ((void)0) -+ -+#else /* no locking! :( */ -+ -+#define acx_lock(adev, flags) ((void)0) -+#define acx_unlock(adev, flags) ((void)0) -+#define acx_sem_lock(adev) ((void)0) -+#define acx_sem_unlock(adev) ((void)0) -+#define acx_lock_unhold() ((void)0) -+#define acx_sem_unhold() ((void)0) -+ -+#endif -+ -+ -+/*********************************************************************** -+*/ -+ -+/* Can race with rx path (which is not protected by sem): -+** rx -> process_[re]assocresp() -> set_status(ASSOCIATED) -> wake_queue() -+** Can race with tx_complete IRQ: -+** IRQ -> acxpci_l_clean_txdesc -> acx_wake_queue -+** Review carefully all callsites */ -+static inline void -+acx_stop_queue(struct net_device *ndev, const char *msg) -+{ -+ if (netif_queue_stopped(ndev)) -+ return; -+ -+ netif_stop_queue(ndev); -+ if (msg) -+ log(L_BUFT, "tx: stop queue %s\n", msg); -+} -+ -+static inline int -+acx_queue_stopped(struct net_device *ndev) -+{ -+ return netif_queue_stopped(ndev); -+} -+ -+/* -+static inline void -+acx_start_queue(struct net_device *ndev, const char *msg) -+{ -+ netif_start_queue(ndev); -+ if (msg) -+ log(L_BUFT, "tx: start queue %s\n", msg); -+} -+*/ -+ -+static inline void -+acx_wake_queue(struct net_device *ndev, const char *msg) -+{ -+ netif_wake_queue(ndev); -+ if (msg) -+ log(L_BUFT, "tx: wake queue %s\n", msg); -+} -+ -+static inline void -+acx_carrier_off(struct net_device *ndev, const char *msg) -+{ -+ netif_carrier_off(ndev); -+ if (msg) -+ log(L_BUFT, "tx: carrier off %s\n", msg); -+} -+ -+static inline void -+acx_carrier_on(struct net_device *ndev, const char *msg) -+{ -+ netif_carrier_on(ndev); -+ if (msg) -+ log(L_BUFT, "tx: carrier on %s\n", msg); -+} -+ -+/* This function does not need locking UNLESS you call it -+** as acx_set_status(ACX_STATUS_4_ASSOCIATED), bacause this can -+** wake queue. This can race with stop_queue elsewhere. */ -+void acx_set_status(acx_device_t *adev, u16 status); -+ -+ -+/*********************************************************************** -+** Communication with firmware -+*/ -+#define CMD_TIMEOUT_MS(n) (n) -+#define ACX_CMD_TIMEOUT_DEFAULT CMD_TIMEOUT_MS(50) -+ -+#if ACX_DEBUG -+ -+/* We want to log cmd names */ -+int acxpci_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr); -+int acxmem_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr); -+int acxusb_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr); -+static inline int -+acx_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr); -+ if (IS_PCI(adev)) -+ return acxpci_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr); -+ return acxusb_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr); -+} -+#define acx_s_issue_cmd(adev,cmd,param,len) \ -+ acx_s_issue_cmd_timeo_debug(adev,cmd,param,len,ACX_CMD_TIMEOUT_DEFAULT,#cmd) -+#define acx_s_issue_cmd_timeo(adev,cmd,param,len,timeo) \ -+ acx_s_issue_cmd_timeo_debug(adev,cmd,param,len,timeo,#cmd) -+int acx_s_configure_debug(acx_device_t *adev, void *pdr, int type, const char* str); -+#define acx_s_configure(adev,pdr,type) \ -+ acx_s_configure_debug(adev,pdr,type,#type) -+int acx_s_interrogate_debug(acx_device_t *adev, void *pdr, int type, const char* str); -+#define acx_s_interrogate(adev,pdr,type) \ -+ acx_s_interrogate_debug(adev,pdr,type,#type) -+ -+#else -+ -+int acxpci_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout); -+int acxmem_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout); -+int acxusb_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout); -+static inline int -+acx_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_s_issue_cmd_timeo(adev, cmd, param, len, timeout); -+ if (IS_PCI(adev)) -+ return acxpci_s_issue_cmd_timeo(adev, cmd, param, len, timeout); -+ return acxusb_s_issue_cmd_timeo(adev, cmd, param, len, timeout); -+} -+static inline int -+acx_s_issue_cmd(acx_device_t *adev, unsigned cmd, void *param, unsigned len) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT); -+ if (IS_PCI(adev)) -+ return acxpci_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT); -+ return acxusb_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT); -+} -+int acx_s_configure(acx_device_t *adev, void *pdr, int type); -+int acx_s_interrogate(acx_device_t *adev, void *pdr, int type); -+ -+#endif -+ -+void acx_s_cmd_start_scan(acx_device_t *adev); -+ -+ -+/*********************************************************************** -+** Ioctls -+*/ -+int -+acx111pci_ioctl_info( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra); -+int -+acx100pci_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra); -+int -+acx100mem_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra); -+ -+ -+/*********************************************************************** -+** /proc -+*/ -+#ifdef CONFIG_PROC_FS -+int acx_proc_register_entries(const struct net_device *ndev); -+int acx_proc_unregister_entries(const struct net_device *ndev); -+#else -+static inline int -+acx_proc_register_entries(const struct net_device *ndev) { return OK; } -+static inline int -+acx_proc_unregister_entries(const struct net_device *ndev) { return OK; } -+#endif -+ -+ -+/*********************************************************************** -+*/ -+firmware_image_t *acx_s_read_fw(struct device *dev, const char *file, u32 *size); -+int acxpci_s_upload_radio(acx_device_t *adev); -+int acxmem_s_upload_radio(acx_device_t *adev); -+ -+ -+/*********************************************************************** -+** Unsorted yet :) -+*/ -+int acxpci_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf); -+int acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf); -+int acxusb_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf); -+static inline int -+acx_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_s_read_phy_reg(adev, reg, charbuf); -+ if (IS_PCI(adev)) -+ return acxpci_s_read_phy_reg(adev, reg, charbuf); -+ return acxusb_s_read_phy_reg(adev, reg, charbuf); -+} -+ -+int acxpci_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value); -+int acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value); -+int acxusb_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value); -+static inline int -+acx_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_s_write_phy_reg(adev, reg, value); -+ if (IS_PCI(adev)) -+ return acxpci_s_write_phy_reg(adev, reg, value); -+ return acxusb_s_write_phy_reg(adev, reg, value); -+} -+ -+tx_t* acxpci_l_alloc_tx(acx_device_t *adev); -+tx_t* acxmem_l_alloc_tx(acx_device_t *adev); -+tx_t* acxusb_l_alloc_tx(acx_device_t *adev); -+static inline tx_t* -+acx_l_alloc_tx(acx_device_t *adev) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_l_alloc_tx(adev); -+ if (IS_PCI(adev)) -+ return acxpci_l_alloc_tx(adev); -+ return acxusb_l_alloc_tx(adev); -+} -+ -+void acxusb_l_dealloc_tx(tx_t *tx_opaque); -+void acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque); -+static inline void -+acx_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque) -+{ -+#ifdef ACX_MEM -+ acxmem_l_dealloc_tx (adev, tx_opaque); -+#else -+ if (IS_USB(adev)) -+ acxusb_l_dealloc_tx(tx_opaque); -+#endif -+} -+ -+void* acxpci_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque); -+void* acxmem_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque); -+void* acxusb_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque); -+static inline void* -+acx_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque) -+{ -+#if defined (ACX_MEM) -+ return acxmem_l_get_txbuf(adev, tx_opaque); -+#else -+ if (IS_PCI(adev)) -+ return acxpci_l_get_txbuf(adev, tx_opaque); -+ return acxusb_l_get_txbuf(adev, tx_opaque); -+#endif -+} -+ -+void acxpci_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len); -+void acxmem_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len); -+void acxusb_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len); -+static inline void -+acx_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len) -+{ -+#if defined (ACX_MEM) -+ acxmem_l_tx_data(adev, tx_opaque, len); -+#else -+ if (IS_PCI(adev)) -+ acxpci_l_tx_data(adev, tx_opaque, len); -+ else -+ acxusb_l_tx_data(adev, tx_opaque, len); -+#endif -+} -+ -+static inline wlan_hdr_t* -+acx_get_wlan_hdr(acx_device_t *adev, const rxbuffer_t *rxbuf) -+{ -+ return (wlan_hdr_t*)((u8*)&rxbuf->hdr_a3 + adev->phy_header_len); -+} -+ -+void acxpci_l_power_led(acx_device_t *adev, int enable); -+int acxpci_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf); -+unsigned int acxpci_l_clean_txdesc(acx_device_t *adev); -+void acxpci_l_clean_txdesc_emergency(acx_device_t *adev); -+int acxpci_s_create_hostdesc_queues(acx_device_t *adev); -+void acxpci_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start); -+void acxpci_free_desc_queues(acx_device_t *adev); -+char* acxpci_s_proc_diag_output(char *p, acx_device_t *adev); -+int acxpci_proc_eeprom_output(char *p, acx_device_t *adev); -+void acxpci_set_interrupt_mask(acx_device_t *adev); -+int acx100pci_s_set_tx_level(acx_device_t *adev, u8 level_dbm); -+ -+void acxmem_l_power_led(acx_device_t *adev, int enable); -+int acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf); -+unsigned int acxmem_l_clean_txdesc(acx_device_t *adev); -+void acxmem_l_clean_txdesc_emergency(acx_device_t *adev); -+int acxmem_s_create_hostdesc_queues(acx_device_t *adev); -+void acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start); -+void acxmem_free_desc_queues(acx_device_t *adev); -+char* acxmem_s_proc_diag_output(char *p, acx_device_t *adev); -+int acxmem_proc_eeprom_output(char *p, acx_device_t *adev); -+void acxmem_set_interrupt_mask(acx_device_t *adev); -+int acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm); -+ -+void acx_s_msleep(int ms); -+int acx_s_init_mac(acx_device_t *adev); -+void acx_set_reg_domain(acx_device_t *adev, unsigned char reg_dom_id); -+void acx_set_timer(acx_device_t *adev, int timeout_us); -+void acx_update_capabilities(acx_device_t *adev); -+void acx_s_start(acx_device_t *adev); -+ -+void acx_s_update_card_settings(acx_device_t *adev); -+void acx_s_parse_configoption(acx_device_t *adev, const acx111_ie_configoption_t *pcfg); -+void acx_l_update_ratevector(acx_device_t *adev); -+ -+void acx_init_task_scheduler(acx_device_t *adev); -+void acx_schedule_task(acx_device_t *adev, unsigned int set_flag); -+ -+int acx_e_ioctl_old(struct net_device *ndev, struct ifreq *ifr, int cmd); -+ -+client_t *acx_l_sta_list_get(acx_device_t *adev, const u8 *address); -+void acx_l_sta_list_del(acx_device_t *adev, client_t *clt); -+ -+int acx_l_transmit_disassoc(acx_device_t *adev, client_t *clt); -+void acx_i_timer(unsigned long a); -+int acx_s_complete_scan(acx_device_t *adev); -+ -+struct sk_buff *acx_rxbuf_to_ether(acx_device_t *adev, rxbuffer_t *rxbuf); -+int acx_ether_to_txbuf(acx_device_t *adev, void *txbuf, const struct sk_buff *skb); -+ -+u8 acx_signal_determine_quality(u8 signal, u8 noise); -+ -+void acx_l_process_rxbuf(acx_device_t *adev, rxbuffer_t *rxbuf); -+void acx_l_handle_txrate_auto(acx_device_t *adev, struct client *txc, -+ u16 intended_rate, u8 rate100, u16 rate111, u8 error, -+ int pkts_to_ignore); -+ -+void acx_dump_bytes(const void *, int); -+void acx_log_bad_eid(wlan_hdr_t* hdr, int len, wlan_ie_t* ie_ptr); -+ -+u8 acx_rate111to100(u16); -+ -+void acx_s_set_defaults(acx_device_t *adev); -+ -+#if !ACX_DEBUG -+static inline const char* acx_get_packet_type_string(u16 fc) { return ""; } -+#else -+const char* acx_get_packet_type_string(u16 fc); -+#endif -+const char* acx_cmd_status_str(unsigned int state); -+ -+int acx_i_start_xmit(struct sk_buff *skb, struct net_device *ndev); -+ -+void great_inquisitor(acx_device_t *adev); -+ -+void acx_s_get_firmware_version(acx_device_t *adev); -+void acx_display_hardware_details(acx_device_t *adev); -+ -+int acx_e_change_mtu(struct net_device *ndev, int mtu); -+struct net_device_stats* acx_e_get_stats(struct net_device *ndev); -+struct iw_statistics* acx_e_get_wireless_stats(struct net_device *ndev); -+ -+#ifdef ACX_MEM -+int __init acxmem_e_init_module(void); -+void __exit acxmem_e_cleanup_module(void); -+void acxmem_e_release(struct device *dev); -+#else -+int __init acxpci_e_init_module(void); -+int __init acxusb_e_init_module(void); -+void __exit acxpci_e_cleanup_module(void); -+void __exit acxusb_e_cleanup_module(void); -+#endif -+int __init acx_cs_init(void); -+void __exit acx_cs_cleanup(void); -Index: linux-2.6.22/drivers/net/wireless/acx/acx.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/acx.h 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,14 @@ -+#if defined(CONFIG_ACX_MEM) && !defined(ACX_MEM) -+#define ACX_MEM -+#endif -+ -+#if defined(CONFIG_ACX_CS) && !defined(ACX_MEM) -+#define ACX_MEM -+#endif -+ -+#include "acx_config.h" -+#include "wlan_compat.h" -+#include "wlan_hdr.h" -+#include "wlan_mgmt.h" -+#include "acx_struct.h" -+#include "acx_func.h" -Index: linux-2.6.22/drivers/net/wireless/acx/acx_hw.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/acx_hw.h 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,18 @@ -+/* -+ * Interface for ACX slave memory driver -+ * -+ * Copyright (c) 2006 SDG Systems, LLC -+ * -+ * GPL -+ * -+ */ -+ -+#ifndef _ACX_HW_H -+#define _ACX_HW_H -+ -+struct acx_hardware_data { -+ int (*start_hw)( void ); -+ int (*stop_hw)( void ); -+}; -+ -+#endif /* _ACX_HW_H */ -Index: linux-2.6.22/drivers/net/wireless/acx/acx_struct.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/acx_struct.h 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,2114 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** Forward declarations of types -+*/ -+typedef struct tx tx_t; -+typedef struct acx_device acx_device_t; -+typedef struct client client_t; -+typedef struct rxdesc rxdesc_t; -+typedef struct txdesc txdesc_t; -+typedef struct rxhostdesc rxhostdesc_t; -+typedef struct txhostdesc txhostdesc_t; -+ -+ -+/*********************************************************************** -+** Debug / log functionality -+*/ -+enum { -+ L_LOCK = (ACX_DEBUG>1)*0x0001, /* locking debug log */ -+ L_INIT = (ACX_DEBUG>0)*0x0002, /* special card initialization logging */ -+ L_IRQ = (ACX_DEBUG>0)*0x0004, /* interrupt stuff */ -+ L_ASSOC = (ACX_DEBUG>0)*0x0008, /* assocation (network join) and station log */ -+ L_FUNC = (ACX_DEBUG>1)*0x0020, /* logging of function enter / leave */ -+ L_XFER = (ACX_DEBUG>1)*0x0080, /* logging of transfers and mgmt */ -+ L_DATA = (ACX_DEBUG>1)*0x0100, /* logging of transfer data */ -+ L_DEBUG = (ACX_DEBUG>1)*0x0200, /* log of debug info */ -+ L_IOCTL = (ACX_DEBUG>0)*0x0400, /* log ioctl calls */ -+ L_CTL = (ACX_DEBUG>1)*0x0800, /* log of low-level ctl commands */ -+ L_BUFR = (ACX_DEBUG>1)*0x1000, /* debug rx buffer mgmt (ring buffer etc.) */ -+ L_XFER_BEACON = (ACX_DEBUG>1)*0x2000, /* also log beacon packets */ -+ L_BUFT = (ACX_DEBUG>1)*0x4000, /* debug tx buffer mgmt (ring buffer etc.) */ -+ L_USBRXTX = (ACX_DEBUG>0)*0x8000, /* debug USB rx/tx operations */ -+ L_BUF = L_BUFR + L_BUFT, -+ L_ANY = 0xffff -+}; -+ -+#if ACX_DEBUG -+extern unsigned int acx_debug; -+#else -+enum { acx_debug = 0 }; -+#endif -+ -+ -+/*********************************************************************** -+** Random helpers -+*/ -+#define ACX_PACKED __attribute__ ((packed)) -+ -+#define VEC_SIZE(a) (sizeof(a)/sizeof(a[0])) -+ -+/* Use worker_queues for 2.5/2.6 kernels and queue tasks for 2.4 kernels -+ (used for the 'bottom half' of the interrupt routine) */ -+ -+#include -+#define USE_WORKER_TASKS -+#define WORK_STRUCT struct work_struct -+#define SCHEDULE_WORK schedule_work -+#define FLUSH_SCHEDULED_WORK flush_scheduled_work -+ -+ -+/*********************************************************************** -+** Constants -+*/ -+#define OK 0 -+#define NOT_OK 1 -+ -+/* The supported chip models */ -+#define CHIPTYPE_ACX100 1 -+#define CHIPTYPE_ACX111 2 -+ -+#define IS_ACX100(adev) ((adev)->chip_type == CHIPTYPE_ACX100) -+#define IS_ACX111(adev) ((adev)->chip_type == CHIPTYPE_ACX111) -+ -+/* Supported interfaces */ -+#define DEVTYPE_PCI 0 -+#define DEVTYPE_USB 1 -+#define DEVTYPE_MEM 2 -+ -+#if !defined(CONFIG_ACX_PCI) && !defined(CONFIG_ACX_USB) && !defined(CONFIG_ACX_MEM) && !defined(CONFIG_ACX_CS) -+#error Driver must include PCI, USB, PCMCIA or memory mapped interface support. You selected none of them. -+#endif -+ -+#if defined(CONFIG_ACX_PCI) -+ #if !defined(CONFIG_ACX_USB) -+ #define IS_PCI(adev) 1 -+ #else -+ #define IS_PCI(adev) ((adev)->dev_type == DEVTYPE_PCI) -+ #endif -+#else -+ #define IS_PCI(adev) 0 -+#endif -+ -+#if defined(CONFIG_ACX_USB) -+ #if !defined(CONFIG_ACX_PCI) -+ #define IS_USB(adev) 1 -+ #else -+ #define IS_USB(adev) ((adev)->dev_type == DEVTYPE_USB) -+ #endif -+#else -+ #define IS_USB(adev) 0 -+#endif -+ -+#if defined(CONFIG_ACX_MEM) || defined(CONFIG_ACX_CS) -+ #define IS_MEM(adev) 1 -+#else -+ #define IS_MEM(adev) 0 -+#endif -+ -+/* Driver defaults */ -+#define DEFAULT_DTIM_INTERVAL 10 -+/* used to be 2048, but FreeBSD driver changed it to 4096 to work properly -+** in noisy wlans */ -+#define DEFAULT_MSDU_LIFETIME 4096 -+#define DEFAULT_RTS_THRESHOLD 2312 /* max. size: disable RTS mechanism */ -+#define DEFAULT_BEACON_INTERVAL 100 -+ -+#define ACX100_BAP_DATALEN_MAX 4096 -+#define ACX100_RID_GUESSING_MAXLEN 2048 /* I'm not really sure */ -+#define ACX100_RIDDATA_MAXLEN ACX100_RID_GUESSING_MAXLEN -+ -+/* Support Constants */ -+/* Radio type names, found in Win98 driver's TIACXLN.INF */ -+#define RADIO_MAXIM_0D 0x0d -+#define RADIO_RFMD_11 0x11 -+#define RADIO_RALINK_15 0x15 -+/* used in ACX111 cards (WG311v2, WL-121, ...): */ -+#define RADIO_RADIA_16 0x16 -+/* most likely *sometimes* used in ACX111 cards: */ -+#define RADIO_UNKNOWN_17 0x17 -+/* FwRad19.bin was found in a Safecom driver; must be an ACX111 radio: */ -+#define RADIO_UNKNOWN_19 0x19 -+#define RADIO_UNKNOWN_1B 0x1b /* radio in SafeCom SWLUT-54125 USB adapter; entirely unknown!! */ -+ -+/* Controller Commands */ -+/* can be found in table cmdTable in firmware "Rev. 1.5.0" (FW150) */ -+#define ACX1xx_CMD_RESET 0x00 -+#define ACX1xx_CMD_INTERROGATE 0x01 -+#define ACX1xx_CMD_CONFIGURE 0x02 -+#define ACX1xx_CMD_ENABLE_RX 0x03 -+#define ACX1xx_CMD_ENABLE_TX 0x04 -+#define ACX1xx_CMD_DISABLE_RX 0x05 -+#define ACX1xx_CMD_DISABLE_TX 0x06 -+#define ACX1xx_CMD_FLUSH_QUEUE 0x07 -+#define ACX1xx_CMD_SCAN 0x08 -+#define ACX1xx_CMD_STOP_SCAN 0x09 -+#define ACX1xx_CMD_CONFIG_TIM 0x0a -+#define ACX1xx_CMD_JOIN 0x0b -+#define ACX1xx_CMD_WEP_MGMT 0x0c -+#ifdef OLD_FIRMWARE_VERSIONS -+#define ACX100_CMD_HALT 0x0e /* mapped to unknownCMD in FW150 */ -+#else -+#define ACX1xx_CMD_MEM_READ 0x0d -+#define ACX1xx_CMD_MEM_WRITE 0x0e -+#endif -+#define ACX1xx_CMD_SLEEP 0x0f -+#define ACX1xx_CMD_WAKE 0x10 -+#define ACX1xx_CMD_UNKNOWN_11 0x11 /* mapped to unknownCMD in FW150 */ -+#define ACX100_CMD_INIT_MEMORY 0x12 -+#define ACX1FF_CMD_DISABLE_RADIO 0x12 /* new firmware? TNETW1450? */ -+#define ACX1xx_CMD_CONFIG_BEACON 0x13 -+#define ACX1xx_CMD_CONFIG_PROBE_RESPONSE 0x14 -+#define ACX1xx_CMD_CONFIG_NULL_DATA 0x15 -+#define ACX1xx_CMD_CONFIG_PROBE_REQUEST 0x16 -+#define ACX1xx_CMD_FCC_TEST 0x17 -+#define ACX1xx_CMD_RADIOINIT 0x18 -+#define ACX111_CMD_RADIOCALIB 0x19 -+#define ACX1FF_CMD_NOISE_HISTOGRAM 0x1c /* new firmware? TNETW1450? */ -+#define ACX1FF_CMD_RX_RESET 0x1d /* new firmware? TNETW1450? */ -+#define ACX1FF_CMD_LNA_CONTROL 0x20 /* new firmware? TNETW1450? */ -+#define ACX1FF_CMD_CONTROL_DBG_TRACE 0x21 /* new firmware? TNETW1450? */ -+ -+/* 'After Interrupt' Commands */ -+#define ACX_AFTER_IRQ_CMD_STOP_SCAN 0x01 -+#define ACX_AFTER_IRQ_CMD_ASSOCIATE 0x02 -+#define ACX_AFTER_IRQ_CMD_RADIO_RECALIB 0x04 -+#define ACX_AFTER_IRQ_UPDATE_CARD_CFG 0x08 -+#define ACX_AFTER_IRQ_TX_CLEANUP 0x10 -+#define ACX_AFTER_IRQ_COMPLETE_SCAN 0x20 -+#define ACX_AFTER_IRQ_RESTART_SCAN 0x40 -+ -+/*********************************************************************** -+** Tx/Rx buffer sizes and watermarks -+** -+** This will alloc and use DMAable buffers of -+** WLAN_A4FR_MAXLEN_WEP_FCS * (RX_CNT + TX_CNT) bytes -+** RX/TX_CNT=32 -> ~150k DMA buffers -+** RX/TX_CNT=16 -> ~75k DMA buffers -+** -+** 2005-10-10: reduced memory usage by lowering both to 16 -+*/ -+#define RX_CNT 16 -+#define TX_CNT 16 -+ -+/* we clean up txdescs when we have N free txdesc: */ -+#define TX_CLEAN_BACKLOG (TX_CNT/4) -+#define TX_START_CLEAN (TX_CNT - TX_CLEAN_BACKLOG) -+#define TX_EMERG_CLEAN 2 -+/* we stop queue if we have < N free txbufs: */ -+#define TX_STOP_QUEUE 3 -+/* we start queue if we have >= N free txbufs: */ -+#define TX_START_QUEUE 5 -+ -+/*********************************************************************** -+** Interrogate/Configure cmd constants -+** -+** NB: length includes JUST the data part of the IE -+** (does not include size of the (type,len) pair) -+** -+** TODO: seems that acx100, acx100usb, acx111 have some differences, -+** fix code with regard to this! -+*/ -+ -+#define DEF_IE(name, val, len) enum { ACX##name=val, ACX##name##_LEN=len } -+ -+/* Information Elements: Network Parameters, Static Configuration Entities */ -+/* these are handled by real_cfgtable in firmware "Rev 1.5.0" (FW150) */ -+DEF_IE(1xx_IE_UNKNOWN_00 ,0x0000, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(100_IE_ACX_TIMER ,0x0001, 0x10); -+DEF_IE(1xx_IE_POWER_MGMT ,0x0002, 0x06); /* TNETW1450: length 0x18!! */ -+DEF_IE(1xx_IE_QUEUE_CONFIG ,0x0003, 0x1c); -+DEF_IE(100_IE_BLOCK_SIZE ,0x0004, 0x02); -+DEF_IE(1FF_IE_SLOT_TIME ,0x0004, 0x08); /* later firmware versions only? */ -+DEF_IE(1xx_IE_MEMORY_CONFIG_OPTIONS ,0x0005, 0x14); -+DEF_IE(1FF_IE_QUEUE_HEAD ,0x0005, 0x14 /* FIXME: length? */); -+DEF_IE(1xx_IE_RATE_FALLBACK ,0x0006, 0x01); /* TNETW1450: length 2 */ -+DEF_IE(100_IE_WEP_OPTIONS ,0x0007, 0x03); -+DEF_IE(111_IE_RADIO_BAND ,0x0007, -1); -+DEF_IE(1FF_IE_TIMING_CFG ,0x0007, -1); /* later firmware versions; TNETW1450 only? */ -+DEF_IE(100_IE_SSID ,0x0008, 0x20); /* huh? */ -+DEF_IE(1xx_IE_MEMORY_MAP ,0x0008, 0x28); /* huh? TNETW1450 has length 0x40!! */ -+DEF_IE(1xx_IE_SCAN_STATUS ,0x0009, 0x04); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1xx_IE_ASSOC_ID ,0x000a, 0x02); -+DEF_IE(1xx_IE_UNKNOWN_0B ,0x000b, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1FF_IE_TX_POWER_LEVEL_TABLE ,0x000b, 0x18); /* later firmware versions; TNETW1450 only? */ -+DEF_IE(100_IE_UNKNOWN_0C ,0x000c, -1); /* very small implementation in FW150! */ -+/* ACX100 has an equivalent struct in the cmd mailbox directly after reset. -+ * 0x14c seems extremely large, will trash stack on failure (memset!) -+ * in case of small input struct --> OOPS! */ -+DEF_IE(111_IE_CONFIG_OPTIONS ,0x000c, 0x14c); -+DEF_IE(1xx_IE_FWREV ,0x000d, 0x18); -+DEF_IE(1xx_IE_FCS_ERROR_COUNT ,0x000e, 0x04); -+DEF_IE(1xx_IE_MEDIUM_USAGE ,0x000f, 0x08); -+DEF_IE(1xx_IE_RXCONFIG ,0x0010, 0x04); -+DEF_IE(100_IE_UNKNOWN_11 ,0x0011, -1); /* NONBINARY: large implementation in FW150! link quality readings or so? */ -+DEF_IE(111_IE_QUEUE_THRESH ,0x0011, -1); -+DEF_IE(100_IE_UNKNOWN_12 ,0x0012, -1); /* NONBINARY: VERY large implementation in FW150!! */ -+DEF_IE(111_IE_BSS_POWER_SAVE ,0x0012, /* -1 */ 2); -+DEF_IE(1xx_IE_FIRMWARE_STATISTICS ,0x0013, 0x9c); /* TNETW1450: length 0x134!! */ -+DEF_IE(1FF_IE_RX_INTR_CONFIG ,0x0014, 0x14); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1xx_IE_FEATURE_CONFIG ,0x0015, 0x08); -+DEF_IE(111_IE_KEY_CHOOSE ,0x0016, 0x04); /* for rekeying. really len=4?? */ -+DEF_IE(1FF_IE_MISC_CONFIG_TABLE ,0x0017, 0x04); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_WONE_CONFIG ,0x0018, -1); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_TID_CONFIG ,0x001a, 0x2c); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_CALIB_ASSESSMENT ,0x001e, 0x04); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_BEACON_FILTER_OPTIONS ,0x001f, 0x02); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_LOW_RSSI_THRESH_OPT ,0x0020, 0x04); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_NOISE_HISTOGRAM_RESULTS ,0x0021, 0x30); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_PACKET_DETECT_THRESH ,0x0023, 0x04); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_TX_CONFIG_OPTIONS ,0x0024, 0x04); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_CCA_THRESHOLD ,0x0025, 0x02); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_EVENT_MASK ,0x0026, 0x08); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_DTIM_PERIOD ,0x0027, 0x02); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_ACI_CONFIG_SET ,0x0029, 0x06); /* later firmware versions; maybe TNETW1450 only? */ -+DEF_IE(1FF_IE_EEPROM_VER ,0x0030, 0x04); /* later firmware versions; maybe TNETW1450 only? */ -+DEF_IE(1xx_IE_DOT11_STATION_ID ,0x1001, 0x06); -+DEF_IE(100_IE_DOT11_UNKNOWN_1002 ,0x1002, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(111_IE_DOT11_FRAG_THRESH ,0x1002, -1); /* mapped to cfgInvalid in FW150; TNETW1450 has length 2!! */ -+DEF_IE(100_IE_DOT11_BEACON_PERIOD ,0x1003, 0x02); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1xx_IE_DOT11_DTIM_PERIOD ,0x1004, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1FF_IE_DOT11_MAX_RX_LIFETIME ,0x1004, -1); /* later firmware versions; maybe TNETW1450 only? */ -+DEF_IE(1xx_IE_DOT11_SHORT_RETRY_LIMIT ,0x1005, 0x01); /* TNETW1450: length 2 */ -+DEF_IE(1xx_IE_DOT11_LONG_RETRY_LIMIT ,0x1006, 0x01); /* TNETW1450: length 2 */ -+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_WRITE ,0x1007, 0x20); /* configure default keys; TNETW1450 has length 0x24!! */ -+DEF_IE(1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME ,0x1008, 0x04); -+DEF_IE(1xx_IE_DOT11_GROUP_ADDR ,0x1009, -1); -+DEF_IE(1xx_IE_DOT11_CURRENT_REG_DOMAIN ,0x100a, 0x02); -+/* It's harmless to have larger struct. Use USB case always. */ -+DEF_IE(1xx_IE_DOT11_CURRENT_ANTENNA ,0x100b, 0x02); /* in fact len=1 for PCI */ -+DEF_IE(1xx_IE_DOT11_UNKNOWN_100C ,0x100c, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1xx_IE_DOT11_TX_POWER_LEVEL ,0x100d, 0x01); /* TNETW1450 has length 2!! */ -+DEF_IE(1xx_IE_DOT11_CURRENT_CCA_MODE ,0x100e, 0x02); /* in fact len=1 for PCI */ -+/* USB doesn't return anything - len==0?! */ -+DEF_IE(100_IE_DOT11_ED_THRESHOLD ,0x100f, 0x04); -+DEF_IE(1xx_IE_DOT11_WEP_DEFAULT_KEY_SET ,0x1010, 0x01); /* set default key ID; TNETW1450: length 2 */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1011 ,0x1011, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1FF_IE_DOT11_CURR_5GHZ_REGDOM ,0x1011, -1); /* later firmware versions; maybe TNETW1450 only? */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1012 ,0x1012, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1013 ,0x1013, -1); /* mapped to cfgInvalid in FW150 */ -+ -+#if 0 -+/* Experimentally obtained on acx100, fw 1.9.8.b -+** -1 means that fw returned 'invalid IE' -+** 0200 FC00 nnnn... are test read contents: u16 type, u16 len, data -+** (AA are poison bytes marking bytes not written by fw) -+** -+** Looks like acx100 fw does not update len field (thus len=256-4=FC here) -+** A number of IEs seem to trash type,len fields -+** IEs marked 'huge' return gobs of data (no poison bytes remain) -+*/ -+DEF_IE(100_IE_INVAL_00, 0x0000, -1); -+DEF_IE(100_IE_INVAL_01, 0x0001, -1); /* IE_ACX_TIMER, len=16 on older fw */ -+DEF_IE(100_IE_POWER_MGMT, 0x0002, 4); /* 0200FC00 00040000 AAAAAAAA */ -+DEF_IE(100_IE_QUEUE_CONFIG, 0x0003, 28); /* 0300FC00 48060000 9CAD0000 0101AAAA DCB00000 E4B00000 9CAA0000 00AAAAAA */ -+DEF_IE(100_IE_BLOCK_SIZE, 0x0004, 2); /* 0400FC00 0001AAAA AAAAAAAA AAAAAAAA */ -+/* write only: */ -+DEF_IE(100_IE_MEMORY_CONFIG_OPTIONS, 0x0005, 20); -+DEF_IE(100_IE_RATE_FALLBACK, 0x0006, 1); /* 0600FC00 00AAAAAA AAAAAAAA AAAAAAAA */ -+/* write only: */ -+DEF_IE(100_IE_WEP_OPTIONS, 0x0007, 3); -+DEF_IE(100_IE_MEMORY_MAP, 0x0008, 40); /* huge: 0800FC00 30000000 6CA20000 70A20000... */ -+/* gives INVAL on read: */ -+DEF_IE(100_IE_SCAN_STATUS, 0x0009, -1); -+DEF_IE(100_IE_ASSOC_ID, 0x000a, 2); /* huge: 0A00FC00 00000000 01040800 00000000... */ -+DEF_IE(100_IE_INVAL_0B, 0x000b, -1); -+/* 'command rejected': */ -+DEF_IE(100_IE_CONFIG_OPTIONS, 0x000c, -3); -+DEF_IE(100_IE_FWREV, 0x000d, 24); /* 0D00FC00 52657620 312E392E 382E6200 AAAAAAAA AAAAAAAA 05050201 AAAAAAAA */ -+DEF_IE(100_IE_FCS_ERROR_COUNT, 0x000e, 4); -+DEF_IE(100_IE_MEDIUM_USAGE, 0x000f, 8); /* E41F0000 2D780300 FCC91300 AAAAAAAA */ -+DEF_IE(100_IE_RXCONFIG, 0x0010, 4); /* 1000FC00 00280000 AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_QUEUE_THRESH, 0x0011, 12); /* 1100FC00 AAAAAAAA 00000000 00000000 */ -+DEF_IE(100_IE_BSS_POWER_SAVE, 0x0012, 1); /* 1200FC00 00AAAAAA AAAAAAAA AAAAAAAA */ -+/* read only, variable len */ -+DEF_IE(100_IE_FIRMWARE_STATISTICS, 0x0013, 256); /* 0000AC00 00000000 ... */ -+DEF_IE(100_IE_INT_CONFIG, 0x0014, 20); /* 00000000 00000000 00000000 00000000 5D74D105 00000000 AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_FEATURE_CONFIG, 0x0015, 8); /* 1500FC00 16000000 AAAAAAAA AAAAAAAA */ -+/* returns 'invalid MAC': */ -+DEF_IE(100_IE_KEY_CHOOSE, 0x0016, -4); -+DEF_IE(100_IE_INVAL_17, 0x0017, -1); -+DEF_IE(100_IE_UNKNOWN_18, 0x0018, 0); /* null len?! 1800FC00 AAAAAAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_UNKNOWN_19, 0x0019, 256); /* huge: 1900FC00 9C1F00EA FEFFFFEA FEFFFFEA... */ -+DEF_IE(100_IE_INVAL_1A, 0x001A, -1); -+ -+DEF_IE(100_IE_DOT11_INVAL_1000, 0x1000, -1); -+DEF_IE(100_IE_DOT11_STATION_ID, 0x1001, 6); /* huge: 0110FC00 58B10E2F 03000000 00000000... */ -+DEF_IE(100_IE_DOT11_INVAL_1002, 0x1002, -1); -+DEF_IE(100_IE_DOT11_INVAL_1003, 0x1003, -1); -+DEF_IE(100_IE_DOT11_INVAL_1004, 0x1004, -1); -+DEF_IE(100_IE_DOT11_SHORT_RETRY_LIMIT, 0x1005, 1); -+DEF_IE(100_IE_DOT11_LONG_RETRY_LIMIT, 0x1006, 1); -+/* write only: */ -+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_WRITE, 0x1007, 32); -+DEF_IE(100_IE_DOT11_MAX_XMIT_MSDU_LIFETIME, 0x1008, 4); /* huge: 0810FC00 00020000 F4010000 00000000... */ -+/* undoc but returns something */ -+DEF_IE(100_IE_DOT11_GROUP_ADDR, 0x1009, 12); /* huge: 0910FC00 00000000 00000000 00000000... */ -+DEF_IE(100_IE_DOT11_CURRENT_REG_DOMAIN, 0x100a, 1); /* 0A10FC00 30AAAAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_DOT11_CURRENT_ANTENNA, 0x100b, 1); /* 0B10FC00 8FAAAAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_DOT11_INVAL_100C, 0x100c, -1); -+DEF_IE(100_IE_DOT11_TX_POWER_LEVEL, 0x100d, 2); /* 00000000 0100AAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_DOT11_CURRENT_CCA_MODE, 0x100e, 1); /* 0E10FC00 0DAAAAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_DOT11_ED_THRESHOLD, 0x100f, 4); /* 0F10FC00 70000000 AAAAAAAA AAAAAAAA */ -+/* set default key ID */ -+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_SET, 0x1010, 1); /* 1010FC00 00AAAAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_DOT11_INVAL_1011, 0x1011, -1); -+DEF_IE(100_IE_DOT11_INVAL_1012, 0x1012, -1); -+DEF_IE(100_IE_DOT11_INVAL_1013, 0x1013, -1); -+DEF_IE(100_IE_DOT11_UNKNOWN_1014, 0x1014, 256); /* huge */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1015, 0x1015, 256); /* huge */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1016, 0x1016, 256); /* huge */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1017, 0x1017, 256); /* huge */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1018, 0x1018, 256); /* huge */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1019, 0x1019, 256); /* huge */ -+#endif -+ -+#if 0 -+/* Experimentally obtained on PCI acx111 Xterasys XN-2522g, fw 1.2.1.34 -+** -1 means that fw returned 'invalid IE' -+** 0400 0800 nnnn... are test read contents: u16 type, u16 len, data -+** (AA are poison bytes marking bytes not written by fw) -+** -+** Looks like acx111 fw reports real len! -+*/ -+DEF_IE(111_IE_INVAL_00, 0x0000, -1); -+DEF_IE(111_IE_INVAL_01, 0x0001, -1); -+DEF_IE(111_IE_POWER_MGMT, 0x0002, 12); -+/* write only, variable len: 12 + rxqueue_cnt*8 + txqueue_cnt*4: */ -+DEF_IE(111_IE_MEMORY_CONFIG, 0x0003, 24); -+DEF_IE(111_IE_BLOCK_SIZE, 0x0004, 8); /* 04000800 AA00AAAA AAAAAAAA */ -+/* variable len: 8 + rxqueue_cnt*8 + txqueue_cnt*8: */ -+DEF_IE(111_IE_QUEUE_HEAD, 0x0005, 24); -+DEF_IE(111_IE_RATE_FALLBACK, 0x0006, 1); -+/* acx100 name:WEP_OPTIONS */ -+/* said to have len:1 (not true, actually returns 12 bytes): */ -+DEF_IE(111_IE_RADIO_BAND, 0x0007, 12); /* 07000C00 AAAA1F00 FF03AAAA AAAAAAAA */ -+DEF_IE(111_IE_MEMORY_MAP, 0x0008, 48); -+/* said to have len:4, but gives INVAL on read: */ -+DEF_IE(111_IE_SCAN_STATUS, 0x0009, -1); -+DEF_IE(111_IE_ASSOC_ID, 0x000a, 2); -+/* write only, len is not known: */ -+DEF_IE(111_IE_UNKNOWN_0B, 0x000b, 0); -+/* read only, variable len. I see 67 byte reads: */ -+DEF_IE(111_IE_CONFIG_OPTIONS, 0x000c, 67); /* 0C004300 01160500 ... */ -+DEF_IE(111_IE_FWREV, 0x000d, 24); -+DEF_IE(111_IE_FCS_ERROR_COUNT, 0x000e, 4); -+DEF_IE(111_IE_MEDIUM_USAGE, 0x000f, 8); -+DEF_IE(111_IE_RXCONFIG, 0x0010, 4); -+DEF_IE(111_IE_QUEUE_THRESH, 0x0011, 12); -+DEF_IE(111_IE_BSS_POWER_SAVE, 0x0012, 1); -+/* read only, variable len. I see 240 byte reads: */ -+DEF_IE(111_IE_FIRMWARE_STATISTICS, 0x0013, 240); /* 1300F000 00000000 ... */ -+/* said to have len=17. looks like fw pads it to 20: */ -+DEF_IE(111_IE_INT_CONFIG, 0x0014, 20); /* 14001400 00000000 00000000 00000000 00000000 00000000 */ -+DEF_IE(111_IE_FEATURE_CONFIG, 0x0015, 8); -+/* said to be name:KEY_INDICATOR, len:4, but gives INVAL on read: */ -+DEF_IE(111_IE_KEY_CHOOSE, 0x0016, -1); -+/* said to have len:4, but in fact returns 8: */ -+DEF_IE(111_IE_MAX_USB_XFR, 0x0017, 8); /* 17000800 00014000 00000000 */ -+DEF_IE(111_IE_INVAL_18, 0x0018, -1); -+DEF_IE(111_IE_INVAL_19, 0x0019, -1); -+/* undoc but returns something: */ -+/* huh, fw indicates len=20 but uses 4 more bytes in buffer??? */ -+DEF_IE(111_IE_UNKNOWN_1A, 0x001A, 20); /* 1A001400 AA00AAAA 0000020F FF030000 00020000 00000007 04000000 */ -+ -+DEF_IE(111_IE_DOT11_INVAL_1000, 0x1000, -1); -+DEF_IE(111_IE_DOT11_STATION_ID, 0x1001, 6); -+DEF_IE(111_IE_DOT11_FRAG_THRESH, 0x1002, 2); -+/* acx100 only? gives INVAL on read: */ -+DEF_IE(111_IE_DOT11_BEACON_PERIOD, 0x1003, -1); -+/* said to be MAX_RECV_MSDU_LIFETIME: */ -+DEF_IE(111_IE_DOT11_DTIM_PERIOD, 0x1004, 4); -+DEF_IE(111_IE_DOT11_SHORT_RETRY_LIMIT, 0x1005, 1); -+DEF_IE(111_IE_DOT11_LONG_RETRY_LIMIT, 0x1006, 1); -+/* acx100 only? gives INVAL on read: */ -+DEF_IE(111_IE_DOT11_WEP_DEFAULT_KEY_WRITE, 0x1007, -1); -+DEF_IE(111_IE_DOT11_MAX_XMIT_MSDU_LIFETIME, 0x1008, 4); -+/* undoc but returns something. maybe it's 2 multicast MACs to listen to? */ -+DEF_IE(111_IE_DOT11_GROUP_ADDR, 0x1009, 12); /* 09100C00 00000000 00000000 00000000 */ -+DEF_IE(111_IE_DOT11_CURRENT_REG_DOMAIN, 0x100a, 1); -+DEF_IE(111_IE_DOT11_CURRENT_ANTENNA, 0x100b, 2); -+DEF_IE(111_IE_DOT11_INVAL_100C, 0x100c, -1); -+DEF_IE(111_IE_DOT11_TX_POWER_LEVEL, 0x100d, 1); -+/* said to have len=1 but gives INVAL on read: */ -+DEF_IE(111_IE_DOT11_CURRENT_CCA_MODE, 0x100e, -1); -+/* said to have len=4 but gives INVAL on read: */ -+DEF_IE(111_IE_DOT11_ED_THRESHOLD, 0x100f, -1); -+/* set default key ID. write only: */ -+DEF_IE(111_IE_DOT11_WEP_DEFAULT_KEY_SET, 0x1010, 1); -+/* undoc but returns something: */ -+DEF_IE(111_IE_DOT11_UNKNOWN_1011, 0x1011, 1); /* 11100100 20 */ -+DEF_IE(111_IE_DOT11_INVAL_1012, 0x1012, -1); -+DEF_IE(111_IE_DOT11_INVAL_1013, 0x1013, -1); -+#endif -+ -+ -+/*********************************************************************** -+**Information Frames Structures -+*/ -+ -+/* Used in beacon frames and the like */ -+#define DOT11RATEBYTE_1 (1*2) -+#define DOT11RATEBYTE_2 (2*2) -+#define DOT11RATEBYTE_5_5 (5*2+1) -+#define DOT11RATEBYTE_11 (11*2) -+#define DOT11RATEBYTE_22 (22*2) -+#define DOT11RATEBYTE_6_G (6*2) -+#define DOT11RATEBYTE_9_G (9*2) -+#define DOT11RATEBYTE_12_G (12*2) -+#define DOT11RATEBYTE_18_G (18*2) -+#define DOT11RATEBYTE_24_G (24*2) -+#define DOT11RATEBYTE_36_G (36*2) -+#define DOT11RATEBYTE_48_G (48*2) -+#define DOT11RATEBYTE_54_G (54*2) -+#define DOT11RATEBYTE_BASIC 0x80 /* flags rates included in basic rate set */ -+ -+ -+/*********************************************************************** -+** rxbuffer_t -+** -+** This is the format of rx data returned by acx -+*/ -+ -+/* I've hoped it's a 802.11 PHY header, but no... -+ * so far, I've seen on acx111: -+ * 0000 3a00 0000 0000 IBSS Beacons -+ * 0000 3c00 0000 0000 ESS Beacons -+ * 0000 2700 0000 0000 Probe requests -+ * --vda -+ */ -+typedef struct phy_hdr { -+ u8 unknown[4]; -+ u8 acx111_unknown[4]; -+} ACX_PACKED phy_hdr_t; -+ -+/* seems to be a bit similar to hfa384x_rx_frame. -+ * These fields are still not quite obvious, though. -+ * Some seem to have different meanings... */ -+ -+#define RXBUF_HDRSIZE 12 -+#define RXBUF_BYTES_RCVD(adev, rxbuf) \ -+ ((le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0xfff) - (adev)->phy_header_len) -+#define RXBUF_BYTES_USED(rxbuf) \ -+ ((le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0xfff) + RXBUF_HDRSIZE) -+/* USBism */ -+#define RXBUF_IS_TXSTAT(rxbuf) (le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0x8000) -+/* -+mac_cnt_rcvd: -+ 12 bits: length of frame from control field to first byte of FCS -+ 3 bits: reserved -+ 1 bit: 1 = it's a tx status info, not a rx packet (USB only) -+ -+mac_cnt_mblks: -+ 6 bits: number of memory block used to store frame in adapter memory -+ 1 bit: Traffic Indicator bit in TIM of received Beacon was set -+ -+mac_status: 1 byte (bitmap): -+ 7 Matching BSSID -+ 6 Matching SSID -+ 5 BDCST Address 1 field is a broadcast -+ 4 VBM received beacon frame has more than one set bit (?!) -+ 3 TIM Set bit representing this station is set in TIM of received beacon -+ 2 GROUP Address 1 is a multicast -+ 1 ADDR1 Address 1 matches our MAC -+ 0 FCSGD FSC is good -+ -+phy_stat_baseband: 1 byte (bitmap): -+ 7 Preamble frame had a long preamble -+ 6 PLCP Error CRC16 error in PLCP header -+ 5 Unsup_Mod unsupported modulation -+ 4 Selected Antenna antenna 1 was used to receive this frame -+ 3 PBCC/CCK frame used: 1=PBCC, 0=CCK modulation -+ 2 OFDM frame used OFDM modulation -+ 1 TI Protection protection frame was detected -+ 0 Reserved -+ -+phy_plcp_signal: 1 byte: -+ Receive PLCP Signal field from the Baseband Processor -+ -+phy_level: 1 byte: -+ receive AGC gain level (can be used to measure receive signal strength) -+ -+phy_snr: 1 byte: -+ estimated noise power of equalized receive signal -+ at input of FEC decoder (can be used to measure receive signal quality) -+ -+time: 4 bytes: -+ timestamp sampled from either the Access Manager TSF counter -+ or free-running microsecond counter when the MAC receives -+ first byte of PLCP header. -+*/ -+ -+typedef struct rxbuffer { -+ u16 mac_cnt_rcvd; /* only 12 bits are len! (0xfff) */ -+ u8 mac_cnt_mblks; -+ u8 mac_status; -+ u8 phy_stat_baseband; /* bit 0x80: used LNA (Low-Noise Amplifier) */ -+ u8 phy_plcp_signal; -+ u8 phy_level; /* PHY stat */ -+ u8 phy_snr; /* PHY stat */ -+ u32 time; /* timestamp upon MAC rcv first byte */ -+/* 4-byte (acx100) or 8-byte (acx111) phy header will be here -+** if RX_CFG1_INCLUDE_PHY_HDR is in effect: -+** phy_hdr_t phy */ -+ wlan_hdr_a3_t hdr_a3; -+ /* maximally sized data part of wlan packet */ -+ u8 data_a3[WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN]; -+ /* can add hdr/data_a4 if needed */ -+} ACX_PACKED rxbuffer_t; -+ -+ -+/*--- Firmware statistics ----------------------------------------------------*/ -+ -+/* define a random 100 bytes more to catch firmware versions which -+ * provide a bigger struct */ -+#define FW_STATS_FUTURE_EXTENSION 100 -+ -+typedef struct fw_stats_tx { -+ u32 tx_desc_of; -+} ACX_PACKED fw_stats_tx_t; -+ -+typedef struct fw_stats_rx { -+ u32 rx_oom; -+ u32 rx_hdr_of; -+ u32 rx_hw_stuck; /* old: u32 rx_hdr_use_next */ -+ u32 rx_dropped_frame; -+ u32 rx_frame_ptr_err; -+ u32 rx_xfr_hint_trig; -+ u32 rx_aci_events; /* later versions only */ -+ u32 rx_aci_resets; /* later versions only */ -+} ACX_PACKED fw_stats_rx_t; -+ -+typedef struct fw_stats_dma { -+ u32 rx_dma_req; -+ u32 rx_dma_err; -+ u32 tx_dma_req; -+ u32 tx_dma_err; -+} ACX_PACKED fw_stats_dma_t; -+ -+typedef struct fw_stats_irq { -+ u32 cmd_cplt; -+ u32 fiq; -+ u32 rx_hdrs; -+ u32 rx_cmplt; -+ u32 rx_mem_of; -+ u32 rx_rdys; -+ u32 irqs; -+ u32 tx_procs; -+ u32 decrypt_done; -+ u32 dma_0_done; -+ u32 dma_1_done; -+ u32 tx_exch_complet; -+ u32 commands; -+ u32 rx_procs; -+ u32 hw_pm_mode_changes; -+ u32 host_acks; -+ u32 pci_pm; -+ u32 acm_wakeups; -+} ACX_PACKED fw_stats_irq_t; -+ -+typedef struct fw_stats_wep { -+ u32 wep_key_count; -+ u32 wep_default_key_count; -+ u32 dot11_def_key_mib; -+ u32 wep_key_not_found; -+ u32 wep_decrypt_fail; -+ u32 wep_pkt_decrypt; -+ u32 wep_decrypt_irqs; -+} ACX_PACKED fw_stats_wep_t; -+ -+typedef struct fw_stats_pwr { -+ u32 tx_start_ctr; -+ u32 no_ps_tx_too_short; -+ u32 rx_start_ctr; -+ u32 no_ps_rx_too_short; -+ u32 lppd_started; -+ u32 no_lppd_too_noisy; -+ u32 no_lppd_too_short; -+ u32 no_lppd_matching_frame; -+} ACX_PACKED fw_stats_pwr_t; -+ -+typedef struct fw_stats_mic { -+ u32 mic_rx_pkts; -+ u32 mic_calc_fail; -+} ACX_PACKED fw_stats_mic_t; -+ -+typedef struct fw_stats_aes { -+ u32 aes_enc_fail; -+ u32 aes_dec_fail; -+ u32 aes_enc_pkts; -+ u32 aes_dec_pkts; -+ u32 aes_enc_irq; -+ u32 aes_dec_irq; -+} ACX_PACKED fw_stats_aes_t; -+ -+typedef struct fw_stats_event { -+ u32 heartbeat; -+ u32 calibration; -+ u32 rx_mismatch; -+ u32 rx_mem_empty; -+ u32 rx_pool; -+ u32 oom_late; -+ u32 phy_tx_err; -+ u32 tx_stuck; -+} ACX_PACKED fw_stats_event_t; -+ -+/* mainly for size calculation only */ -+typedef struct fw_stats { -+ u16 type; -+ u16 len; -+ fw_stats_tx_t tx; -+ fw_stats_rx_t rx; -+ fw_stats_dma_t dma; -+ fw_stats_irq_t irq; -+ fw_stats_wep_t wep; -+ fw_stats_pwr_t pwr; -+ fw_stats_mic_t mic; -+ fw_stats_aes_t aes; -+ fw_stats_event_t evt; -+ u8 _padding[FW_STATS_FUTURE_EXTENSION]; -+} fw_stats_t; -+ -+/* Firmware version struct */ -+ -+typedef struct fw_ver { -+ u16 cmd; -+ u16 size; -+ char fw_id[20]; -+ u32 hw_id; -+} ACX_PACKED fw_ver_t; -+ -+#define FW_ID_SIZE 20 -+ -+typedef struct shared_queueindicator { -+ u32 indicator; -+ u16 host_lock; -+ u16 fw_lock; -+} ACX_PACKED queueindicator_t; -+ -+/*--- WEP stuff --------------------------------------------------------------*/ -+#define DOT11_MAX_DEFAULT_WEP_KEYS 4 -+ -+/* non-firmware struct, no packing necessary */ -+typedef struct wep_key { -+ size_t size; /* most often used member first */ -+ u8 index; -+ u8 key[29]; -+ u16 strange_filler; -+} wep_key_t; /* size = 264 bytes (33*8) */ -+/* FIXME: We don't have size 264! Or is there 2 bytes beyond the key -+ * (strange_filler)? */ -+ -+/* non-firmware struct, no packing necessary */ -+typedef struct key_struct { -+ u8 addr[ETH_ALEN]; /* 0x00 */ -+ u16 filler1; /* 0x06 */ -+ u32 filler2; /* 0x08 */ -+ u32 index; /* 0x0c */ -+ u16 len; /* 0x10 */ -+ u8 key[29]; /* 0x12; is this long enough??? */ -+} key_struct_t; /* size = 276. FIXME: where is the remaining space?? */ -+ -+ -+/*--- Client (peer) info -----------------------------------------------------*/ -+/* adev->sta_list[] is used for: -+** accumulating and processing of scan results -+** keeping client info in AP mode -+** keeping AP info in STA mode (AP is the only one 'client') -+** keeping peer info in ad-hoc mode -+** non-firmware struct --> no packing necessary */ -+enum { -+ CLIENT_EMPTY_SLOT_0 = 0, -+ CLIENT_EXIST_1 = 1, -+ CLIENT_AUTHENTICATED_2 = 2, -+ CLIENT_ASSOCIATED_3 = 3, -+ CLIENT_JOIN_CANDIDATE = 4 -+}; -+struct client { -+ /* most frequent access first */ -+ u8 used; /* misnamed, more like 'status' */ -+ struct client* next; -+ unsigned long mtime; /* last time we heard it, in jiffies */ -+ size_t essid_len; /* length of ESSID (without '\0') */ -+ u32 sir; /* Standard IR */ -+ u32 snr; /* Signal to Noise Ratio */ -+ u16 aid; /* association ID */ -+ u16 seq; /* from client's auth req */ -+ u16 auth_alg; /* from client's auth req */ -+ u16 cap_info; /* from client's assoc req */ -+ u16 rate_cap; /* what client supports (all rates) */ -+ u16 rate_bas; /* what client supports (basic rates) */ -+ u16 rate_cfg; /* what is allowed (by iwconfig etc) */ -+ u16 rate_cur; /* currently used rate mask */ -+ u8 rate_100; /* currently used rate byte (acx100 only) */ -+ u8 address[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; /* ad-hoc hosts can have bssid != mac */ -+ u8 channel; -+ u8 auth_step; -+ u8 ignore_count; -+ u8 fallback_count; -+ u8 stepup_count; -+ char essid[IW_ESSID_MAX_SIZE + 1]; /* ESSID and trailing '\0' */ -+/* FIXME: this one is too damn big */ -+ char challenge_text[WLAN_CHALLENGE_LEN]; -+}; -+ -+ -+/*********************************************************************** -+** Hardware structures -+*/ -+ -+/* An opaque typesafe helper type -+ * -+ * Some hardware fields are actually pointers, -+ * but they have to remain u32, since using ptr instead -+ * (8 bytes on 64bit systems!) would disrupt the fixed descriptor -+ * format the acx firmware expects in the non-user area. -+ * Since we cannot cram an 8 byte ptr into 4 bytes, we need to -+ * enforce that pointed to data remains in low memory -+ * (address value needs to fit in 4 bytes) on 64bit systems. -+ * -+ * This is easy to get wrong, thus we are using a small struct -+ * and special macros to access it. Macros will check for -+ * attempts to overflow an acx_ptr with value > 0xffffffff. -+ * -+ * Attempts to use acx_ptr without macros result in compile-time errors */ -+ -+typedef struct { -+ u32 v; -+} ACX_PACKED acx_ptr; -+ -+#if ACX_DEBUG -+#define CHECK32(n) BUG_ON(sizeof(n)>4 && (long)(n)>0xffffff00) -+#else -+#define CHECK32(n) ((void)0) -+#endif -+ -+/* acx_ptr <-> integer conversion */ -+#define cpu2acx(n) ({ CHECK32(n); ((acx_ptr){ .v = cpu_to_le32(n) }); }) -+#define acx2cpu(a) (le32_to_cpu(a.v)) -+ -+/* acx_ptr <-> pointer conversion */ -+#define ptr2acx(p) ({ CHECK32(p); ((acx_ptr){ .v = cpu_to_le32((u32)(long)(p)) }); }) -+#define acx2ptr(a) ((void*)le32_to_cpu(a.v)) -+ -+/* Values for rate field (acx100 only) */ -+#define RATE100_1 10 -+#define RATE100_2 20 -+#define RATE100_5 55 -+#define RATE100_11 110 -+#define RATE100_22 220 -+/* This bit denotes use of PBCC: -+** (PBCC encoding is usable with 11 and 22 Mbps speeds only) */ -+#define RATE100_PBCC511 0x80 -+ -+/* Bit values for rate111 field */ -+#define RATE111_1 0x0001 /* DBPSK */ -+#define RATE111_2 0x0002 /* DQPSK */ -+#define RATE111_5 0x0004 /* CCK or PBCC */ -+#define RATE111_6 0x0008 /* CCK-OFDM or OFDM */ -+#define RATE111_9 0x0010 /* CCK-OFDM or OFDM */ -+#define RATE111_11 0x0020 /* CCK or PBCC */ -+#define RATE111_12 0x0040 /* CCK-OFDM or OFDM */ -+#define RATE111_18 0x0080 /* CCK-OFDM or OFDM */ -+#define RATE111_22 0x0100 /* PBCC */ -+#define RATE111_24 0x0200 /* CCK-OFDM or OFDM */ -+#define RATE111_36 0x0400 /* CCK-OFDM or OFDM */ -+#define RATE111_48 0x0800 /* CCK-OFDM or OFDM */ -+#define RATE111_54 0x1000 /* CCK-OFDM or OFDM */ -+#define RATE111_RESERVED 0x2000 -+#define RATE111_PBCC511 0x4000 /* PBCC mod at 5.5 or 11Mbit (else CCK) */ -+#define RATE111_SHORTPRE 0x8000 /* short preamble */ -+/* Special 'try everything' value */ -+#define RATE111_ALL 0x1fff -+/* These bits denote acx100 compatible settings */ -+#define RATE111_ACX100_COMPAT 0x0127 -+/* These bits denote 802.11b compatible settings */ -+#define RATE111_80211B_COMPAT 0x0027 -+ -+/* Descriptor Ctl field bits -+ * init value is 0x8e, "idle" value is 0x82 (in idle tx descs) -+ */ -+#define DESC_CTL_SHORT_PREAMBLE 0x01 /* preamble type: 0 = long; 1 = short */ -+#define DESC_CTL_FIRSTFRAG 0x02 /* this is the 1st frag of the frame */ -+#define DESC_CTL_AUTODMA 0x04 -+#define DESC_CTL_RECLAIM 0x08 /* ready to reuse */ -+#define DESC_CTL_HOSTDONE 0x20 /* host has finished processing */ -+#define DESC_CTL_ACXDONE 0x40 /* acx has finished processing */ -+/* host owns the desc [has to be released last, AFTER modifying all other desc fields!] */ -+#define DESC_CTL_HOSTOWN 0x80 -+#define DESC_CTL_ACXDONE_HOSTOWN (DESC_CTL_ACXDONE | DESC_CTL_HOSTOWN) -+ -+/* Descriptor Status field -+ */ -+#define DESC_STATUS_FULL (1 << 31) -+ -+/* NB: some bits may be interesting for Monitor mode tx (aka Raw tx): */ -+#define DESC_CTL2_SEQ 0x01 /* don't increase sequence field */ -+#define DESC_CTL2_FCS 0x02 /* don't add the FCS */ -+#define DESC_CTL2_MORE_FRAG 0x04 -+#define DESC_CTL2_RETRY 0x08 /* don't increase retry field */ -+#define DESC_CTL2_POWER 0x10 /* don't increase power mgmt. field */ -+#define DESC_CTL2_RTS 0x20 /* do RTS/CTS magic before sending */ -+#define DESC_CTL2_WEP 0x40 /* encrypt this frame */ -+#define DESC_CTL2_DUR 0x80 /* don't increase duration field */ -+ -+/*********************************************************************** -+** PCI structures -+*/ -+/* IRQ Constants -+** (outside of "#ifdef PCI" because USB (mis)uses HOST_INT_SCAN_COMPLETE) */ -+#define HOST_INT_RX_DATA 0x0001 -+#define HOST_INT_TX_COMPLETE 0x0002 -+#define HOST_INT_TX_XFER 0x0004 -+#define HOST_INT_RX_COMPLETE 0x0008 -+#define HOST_INT_DTIM 0x0010 -+#define HOST_INT_BEACON 0x0020 -+#define HOST_INT_TIMER 0x0040 -+#define HOST_INT_KEY_NOT_FOUND 0x0080 -+#define HOST_INT_IV_ICV_FAILURE 0x0100 -+#define HOST_INT_CMD_COMPLETE 0x0200 -+#define HOST_INT_INFO 0x0400 -+#define HOST_INT_OVERFLOW 0x0800 -+#define HOST_INT_PROCESS_ERROR 0x1000 -+#define HOST_INT_SCAN_COMPLETE 0x2000 -+#define HOST_INT_FCS_THRESHOLD 0x4000 -+#define HOST_INT_UNKNOWN 0x8000 -+ -+/* Outside of "#ifdef PCI" because USB needs to know sizeof() -+** of txdesc and rxdesc: */ -+struct txdesc { -+ acx_ptr pNextDesc; /* pointer to next txdesc */ -+ acx_ptr HostMemPtr; /* 0x04 */ -+ acx_ptr AcxMemPtr; /* 0x08 */ -+ u32 tx_time; /* 0x0c */ -+ u16 total_length; /* 0x10 */ -+ u16 Reserved; /* 0x12 */ -+ -+/* The following 16 bytes do not change when acx100 owns the descriptor */ -+/* BUG: fw clears last byte of this area which is supposedly reserved -+** for driver use. amd64 blew up. We dare not use it now */ -+ u32 dummy[4]; -+ -+ u8 Ctl_8; /* 0x24, 8bit value */ -+ u8 Ctl2_8; /* 0x25, 8bit value */ -+ u8 error; /* 0x26 */ -+ u8 ack_failures; /* 0x27 */ -+ -+ union { -+ /* -+ * Packing doesn't work correctly on ARM unless unions are on -+ * 4 byte boundaries. -+ */ -+ struct { -+ u8 rts_failures; /* 0x28 */ -+ u8 rts_ok; /* 0x29 */ -+ u16 d1; -+ } ACX_PACKED rts; -+ struct { -+ u16 d1; -+ u8 rate; /* 0x2a */ -+ u8 queue_ctrl; /* 0x2b */ -+ } ACX_PACKED r1; -+ struct { -+ u16 d1; -+ u16 rate111; /* 0x2a */ -+ } ACX_PACKED r2; -+ } ACX_PACKED u; -+ u32 queue_info; /* 0x2c (acx100, reserved on acx111) */ -+} ACX_PACKED; /* size : 48 = 0x30 */ -+/* NB: acx111 txdesc structure is 4 byte larger */ -+/* All these 4 extra bytes are reserved. tx alloc code takes them into account */ -+ -+struct rxdesc { -+ acx_ptr pNextDesc; /* 0x00 */ -+ acx_ptr HostMemPtr; /* 0x04 */ -+ acx_ptr ACXMemPtr; /* 0x08 */ -+ u32 rx_time; /* 0x0c */ -+ u16 total_length; /* 0x10 */ -+ u16 WEP_length; /* 0x12 */ -+ u32 WEP_ofs; /* 0x14 */ -+ -+/* the following 16 bytes do not change when acx100 owns the descriptor */ -+ u8 driverWorkspace[16]; /* 0x18 */ -+ -+ u8 Ctl_8; -+ u8 rate; -+ u8 error; -+ u8 SNR; /* Signal-to-Noise Ratio */ -+ u8 RxLevel; -+ u8 queue_ctrl; -+ u16 unknown; -+ u32 unknown2; -+} ACX_PACKED; /* size 52 = 0x34 */ -+ -+#if defined(ACX_PCI) || defined(ACX_MEM) -+ -+/* Register I/O offsets */ -+#define ACX100_EEPROM_ID_OFFSET 0x380 -+ -+/* please add further ACX hardware register definitions only when -+ it turns out you need them in the driver, and please try to use -+ firmware functionality instead, since using direct I/O access instead -+ of letting the firmware do it might confuse the firmware's state -+ machine */ -+ -+/* ***** ABSOLUTELY ALWAYS KEEP OFFSETS IN SYNC WITH THE INITIALIZATION -+** OF THE I/O ARRAYS!!!! (grep for '^IO_ACX') ***** */ -+enum { -+ IO_ACX_SOFT_RESET = 0, -+ -+ IO_ACX_SLV_MEM_ADDR, -+ IO_ACX_SLV_MEM_DATA, -+ IO_ACX_SLV_MEM_CTL, -+ IO_ACX_SLV_END_CTL, -+ -+ IO_ACX_FEMR, /* Function Event Mask */ -+ -+ IO_ACX_INT_TRIG, -+ IO_ACX_IRQ_MASK, -+ IO_ACX_IRQ_STATUS_NON_DES, -+ IO_ACX_IRQ_STATUS_CLEAR, /* CLEAR = clear on read */ -+ IO_ACX_IRQ_ACK, -+ IO_ACX_HINT_TRIG, -+ -+ IO_ACX_ENABLE, -+ -+ IO_ACX_EEPROM_CTL, -+ IO_ACX_EEPROM_ADDR, -+ IO_ACX_EEPROM_DATA, -+ IO_ACX_EEPROM_CFG, -+ -+ IO_ACX_PHY_ADDR, -+ IO_ACX_PHY_DATA, -+ IO_ACX_PHY_CTL, -+ -+ IO_ACX_GPIO_OE, -+ -+ IO_ACX_GPIO_OUT, -+ -+ IO_ACX_CMD_MAILBOX_OFFS, -+ IO_ACX_INFO_MAILBOX_OFFS, -+ IO_ACX_EEPROM_INFORMATION, -+ -+ IO_ACX_EE_START, -+ IO_ACX_SOR_CFG, -+ IO_ACX_ECPU_CTRL -+}; -+/* ***** ABSOLUTELY ALWAYS KEEP OFFSETS IN SYNC WITH THE INITIALIZATION -+** OF THE I/O ARRAYS!!!! (grep for '^IO_ACX') ***** */ -+ -+/* Values for IO_ACX_INT_TRIG register: */ -+/* inform hw that rxdesc in queue needs processing */ -+#define INT_TRIG_RXPRC 0x08 -+/* inform hw that txdesc in queue needs processing */ -+#define INT_TRIG_TXPRC 0x04 -+/* ack that we received info from info mailbox */ -+#define INT_TRIG_INFOACK 0x02 -+/* inform hw that we have filled command mailbox */ -+#define INT_TRIG_CMD 0x01 -+ -+struct txhostdesc { -+ acx_ptr data_phy; /* 0x00 [u8 *] */ -+ u16 data_offset; /* 0x04 */ -+ u16 reserved; /* 0x06 */ -+ u16 Ctl_16; /* 16bit value, endianness!! */ -+ u16 length; /* 0x0a */ -+ acx_ptr desc_phy_next; /* 0x0c [txhostdesc *] */ -+ acx_ptr pNext; /* 0x10 [txhostdesc *] */ -+ u32 Status; /* 0x14, unused on Tx */ -+/* From here on you can use this area as you want (variable length, too!) */ -+ u8 *data; -+} ACX_PACKED; -+ -+struct rxhostdesc { -+ acx_ptr data_phy; /* 0x00 [rxbuffer_t *] */ -+ u16 data_offset; /* 0x04 */ -+ u16 reserved; /* 0x06 */ -+ u16 Ctl_16; /* 0x08; 16bit value, endianness!! */ -+ u16 length; /* 0x0a */ -+ acx_ptr desc_phy_next; /* 0x0c [rxhostdesc_t *] */ -+ acx_ptr pNext; /* 0x10 [rxhostdesc_t *] */ -+ u32 Status; /* 0x14 */ -+/* From here on you can use this area as you want (variable length, too!) */ -+ rxbuffer_t *data; -+} ACX_PACKED; -+ -+#endif /* ACX_PCI */ -+ -+/*********************************************************************** -+** USB structures and constants -+*/ -+#ifdef ACX_USB -+ -+/* Used for usb_txbuffer.desc field */ -+#define USB_TXBUF_TXDESC 0xA -+/* Size of header (everything up to data[]) */ -+#define USB_TXBUF_HDRSIZE 14 -+typedef struct usb_txbuffer { -+ u16 desc; -+ u16 mpdu_len; -+ u8 queue_index; -+ u8 rate; -+ u32 hostdata; -+ u8 ctrl1; -+ u8 ctrl2; -+ u16 data_len; -+ /* wlan packet content is placed here: */ -+ u8 data[WLAN_A4FR_MAXLEN_WEP_FCS]; -+} ACX_PACKED usb_txbuffer_t; -+ -+/* USB returns either rx packets (see rxbuffer) or -+** these "tx status" structs: */ -+typedef struct usb_txstatus { -+ u16 mac_cnt_rcvd; /* only 12 bits are len! (0xfff) */ -+ u8 queue_index; -+ u8 mac_status; /* seen 0x20 on tx failure */ -+ u32 hostdata; -+ u8 rate; -+ u8 ack_failures; -+ u8 rts_failures; -+ u8 rts_ok; -+} ACX_PACKED usb_txstatus_t; -+ -+typedef struct usb_tx { -+ unsigned busy:1; -+ struct urb *urb; -+ acx_device_t *adev; -+ /* actual USB bulk output data block is here: */ -+ usb_txbuffer_t bulkout; -+} usb_tx_t; -+ -+struct usb_rx_plain { -+ unsigned busy:1; -+ struct urb *urb; -+ acx_device_t *adev; -+ rxbuffer_t bulkin; -+}; -+ -+typedef struct usb_rx { -+ unsigned busy:1; -+ struct urb *urb; -+ acx_device_t *adev; -+ rxbuffer_t bulkin; -+ /* Make entire structure 4k. Report if it breaks something. */ -+ u8 padding[4*1024 - sizeof(struct usb_rx_plain)]; -+} usb_rx_t; -+#endif /* ACX_USB */ -+ -+ -+/* Config Option structs */ -+ -+typedef struct co_antennas { -+ u8 type; -+ u8 len; -+ u8 list[2]; -+} ACX_PACKED co_antennas_t; -+ -+typedef struct co_powerlevels { -+ u8 type; -+ u8 len; -+ u16 list[8]; -+} ACX_PACKED co_powerlevels_t; -+ -+typedef struct co_datarates { -+ u8 type; -+ u8 len; -+ u8 list[8]; -+} ACX_PACKED co_datarates_t; -+ -+typedef struct co_domains { -+ u8 type; -+ u8 len; -+ u8 list[6]; -+} ACX_PACKED co_domains_t; -+ -+typedef struct co_product_id { -+ u8 type; -+ u8 len; -+ u8 list[128]; -+} ACX_PACKED co_product_id_t; -+ -+typedef struct co_manuf_id { -+ u8 type; -+ u8 len; -+ u8 list[128]; -+} ACX_PACKED co_manuf_t; -+ -+typedef struct co_fixed { -+ char NVSv[8]; -+/* u16 NVS_vendor_offs; ACX111-only */ -+/* u16 unknown; ACX111-only */ -+ u8 MAC[6]; /* ACX100-only */ -+ u16 probe_delay; /* ACX100-only */ -+ u32 eof_memory; -+ u8 dot11CCAModes; -+ u8 dot11Diversity; -+ u8 dot11ShortPreambleOption; -+ u8 dot11PBCCOption; -+ u8 dot11ChannelAgility; -+ u8 dot11PhyType; /* FIXME: does 802.11 call it "dot11PHYType"? */ -+ u8 dot11TempType; -+ u8 table_count; -+} ACX_PACKED co_fixed_t; -+ -+typedef struct acx111_ie_configoption { -+ u16 type; -+ u16 len; -+/* Do not access below members directly, they are in fact variable length */ -+ co_fixed_t fixed; -+ co_antennas_t antennas; -+ co_powerlevels_t power_levels; -+ co_datarates_t data_rates; -+ co_domains_t domains; -+ co_product_id_t product_id; -+ co_manuf_t manufacturer; -+ u8 _padding[4]; -+} ACX_PACKED acx111_ie_configoption_t; -+ -+ -+/*********************************************************************** -+** Main acx per-device data structure -+*/ -+#define ACX_STATE_FW_LOADED 0x01 -+#define ACX_STATE_IFACE_UP 0x02 -+ -+/* MAC mode (BSS type) defines -+ * Note that they shouldn't be redefined, since they are also used -+ * during communication with firmware */ -+#define ACX_MODE_0_ADHOC 0 -+#define ACX_MODE_1_UNUSED 1 -+#define ACX_MODE_2_STA 2 -+#define ACX_MODE_3_AP 3 -+/* These are our own inventions. Sending these to firmware -+** makes it stop emitting beacons, which is exactly what we want -+** for these modes */ -+#define ACX_MODE_MONITOR 0xfe -+#define ACX_MODE_OFF 0xff -+/* 'Submode': identifies exact status of ADHOC/STA host */ -+#define ACX_STATUS_0_STOPPED 0 -+#define ACX_STATUS_1_SCANNING 1 -+#define ACX_STATUS_2_WAIT_AUTH 2 -+#define ACX_STATUS_3_AUTHENTICATED 3 -+#define ACX_STATUS_4_ASSOCIATED 4 -+ -+/* FIXME: this should be named something like struct acx_priv (typedef'd to -+ * acx_priv_t) */ -+ -+/* non-firmware struct, no packing necessary */ -+struct acx_device { -+ /* most frequent accesses first (dereferencing and cache line!) */ -+ -+ /*** Locking ***/ -+ /* FIXME: try to convert semaphore to more efficient mutex according -+ to Ingo Molnar's docs (but not before driver is in mainline or -+ pre-mutex Linux 2.6.10 is very outdated). */ -+ struct semaphore sem; -+ spinlock_t lock; -+#if defined(PARANOID_LOCKING) /* Lock debugging */ -+ const char *last_sem; -+ const char *last_lock; -+ unsigned long sem_time; -+ unsigned long lock_time; -+#endif -+#ifdef ACX_MEM -+ spinlock_t txbuf_lock; -+#endif -+ -+ /*** Linux network device ***/ -+ struct net_device *ndev; /* pointer to linux netdevice */ -+ -+ /*** Device statistics ***/ -+ struct net_device_stats stats; /* net device statistics */ -+#ifdef WIRELESS_EXT -+ struct iw_statistics wstats; /* wireless statistics */ -+#endif -+ /*** Power managment ***/ -+ struct pm_dev *pm; /* PM crap */ -+ -+ /*** Management timer ***/ -+ struct timer_list mgmt_timer; -+ -+ /*** Hardware identification ***/ -+ const char *chip_name; -+ u8 dev_type; -+ u8 chip_type; -+ u8 form_factor; -+ u8 radio_type; -+ u8 eeprom_version; -+ -+ /*** Config retrieved from EEPROM ***/ -+ char cfgopt_NVSv[8]; -+ u16 cfgopt_NVS_vendor_offs; -+ u8 cfgopt_MAC[6]; -+ u16 cfgopt_probe_delay; -+ u32 cfgopt_eof_memory; -+ u8 cfgopt_dot11CCAModes; -+ u8 cfgopt_dot11Diversity; -+ u8 cfgopt_dot11ShortPreambleOption; -+ u8 cfgopt_dot11PBCCOption; -+ u8 cfgopt_dot11ChannelAgility; -+ u8 cfgopt_dot11PhyType; -+ u8 cfgopt_dot11TempType; -+ co_antennas_t cfgopt_antennas; -+ co_powerlevels_t cfgopt_power_levels; -+ co_datarates_t cfgopt_data_rates; -+ co_domains_t cfgopt_domains; -+ co_product_id_t cfgopt_product_id; -+ co_manuf_t cfgopt_manufacturer; -+ -+ /*** Firmware identification ***/ -+ char firmware_version[FW_ID_SIZE+1]; -+ u32 firmware_numver; -+ u32 firmware_id; -+ const u16 *ie_len; -+ const u16 *ie_len_dot11; -+ -+ /*** Device state ***/ -+ u16 dev_state_mask; -+ u8 led_power; /* power LED status */ -+ u32 get_mask; /* mask of settings to fetch from the card */ -+ u32 set_mask; /* mask of settings to write to the card */ -+ -+ /* Barely used in USB case */ -+ u16 irq_status; -+ -+ u8 after_interrupt_jobs; /* mini job list for doing actions after an interrupt occurred */ -+ WORK_STRUCT after_interrupt_task; /* our task for after interrupt actions */ -+ -+ /*** scanning ***/ -+ u16 scan_count; /* number of times to do channel scan */ -+ u8 scan_mode; /* 0 == active, 1 == passive, 2 == background */ -+ u8 scan_rate; -+ u16 scan_duration; -+ u16 scan_probe_delay; -+#if WIRELESS_EXT > 15 -+ struct iw_spy_data spy_data; /* FIXME: needs to be implemented! */ -+#endif -+ -+ /*** Wireless network settings ***/ -+ /* copy of the device address (ifconfig hw ether) that we actually use -+ ** for 802.11; copied over from the network device's MAC address -+ ** (ifconfig) when it makes sense only */ -+ u8 dev_addr[MAX_ADDR_LEN]; -+ u8 bssid[ETH_ALEN]; /* the BSSID after having joined */ -+ u8 ap[ETH_ALEN]; /* The AP we want, FF:FF:FF:FF:FF:FF is any */ -+ u16 aid; /* The Association ID sent from the AP / last used AID if we're an AP */ -+ u16 mode; /* mode from iwconfig */ -+ int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */ -+ u16 status; /* 802.11 association status */ -+ u8 essid_active; /* specific ESSID active, or select any? */ -+ u8 essid_len; /* to avoid dozens of strlen() */ -+ /* INCLUDES \0 termination for easy printf - but many places -+ ** simply want the string data memcpy'd plus a length indicator! -+ ** Keep that in mind... */ -+ char essid[IW_ESSID_MAX_SIZE+1]; -+ /* essid we are going to use for association, in case of "essid 'any'" -+ ** and in case of hidden ESSID (use configured ESSID then) */ -+ char essid_for_assoc[IW_ESSID_MAX_SIZE+1]; -+ char nick[IW_ESSID_MAX_SIZE+1]; /* see essid! */ -+ u8 channel; -+ u8 reg_dom_id; /* reg domain setting */ -+ u16 reg_dom_chanmask; -+ u16 auth_or_assoc_retries; -+ u16 scan_retries; -+ unsigned long scan_start; /* YES, jiffies is defined as "unsigned long" */ -+ -+ /* stations known to us (if we're an ap) */ -+ client_t sta_list[32]; /* tab is larger than list, so that */ -+ client_t *sta_hash_tab[64]; /* hash collisions are not likely */ -+ client_t *ap_client; /* this one is our AP (STA mode only) */ -+ -+ int dup_count; -+ int nondup_count; -+ unsigned long dup_msg_expiry; -+ u16 last_seq_ctrl; /* duplicate packet detection */ -+ -+ /* 802.11 power save mode */ -+ u8 ps_wakeup_cfg; -+ u8 ps_listen_interval; -+ u8 ps_options; -+ u8 ps_hangover_period; -+ u32 ps_enhanced_transition_time; -+ u32 ps_beacon_rx_time; -+ -+ /*** PHY settings ***/ -+ u8 fallback_threshold; -+ u8 stepup_threshold; -+ u16 rate_basic; -+ u16 rate_oper; -+ u16 rate_bcast; -+ u16 rate_bcast100; -+ u8 rate_auto; /* false if "iwconfig rate N" (WITHOUT 'auto'!) */ -+ u8 preamble_mode; /* 0 == Long Preamble, 1 == Short, 2 == Auto */ -+ u8 preamble_cur; -+ -+ u8 tx_disabled; -+ u8 tx_level_dbm; -+ /* u8 tx_level_val; */ -+ /* u8 tx_level_auto; whether to do automatic power adjustment */ -+ -+ unsigned long recalib_time_last_success; -+ unsigned long recalib_time_last_attempt; -+ int recalib_failure_count; -+ int recalib_msg_ratelimit; -+ int retry_errors_msg_ratelimit; -+ -+ unsigned long brange_time_last_state_change; /* time the power LED was last changed */ -+ u8 brange_last_state; /* last state of the LED */ -+ u8 brange_max_quality; /* maximum quality that equates to full speed */ -+ -+ u8 sensitivity; -+ u8 antenna; /* antenna settings */ -+ u8 ed_threshold; /* energy detect threshold */ -+ u8 cca; /* clear channel assessment */ -+ -+ u16 rts_threshold; -+ u16 frag_threshold; -+ u32 short_retry; -+ u32 long_retry; -+ u16 msdu_lifetime; -+ u16 listen_interval; /* given in units of beacon interval */ -+ u32 beacon_interval; -+ -+ u16 capabilities; -+ u8 rate_supported_len; -+ u8 rate_supported[13]; -+ -+ /*** Encryption settings (WEP) ***/ -+ u32 auth_alg; /* used in transmit_authen1 */ -+ u8 wep_enabled; -+ u8 wep_restricted; -+ u8 wep_current_index; -+ wep_key_t wep_keys[DOT11_MAX_DEFAULT_WEP_KEYS]; /* the default WEP keys */ -+ key_struct_t wep_key_struct[10]; -+ -+ /*** Unknown ***/ -+ u8 dtim_interval; -+ -+#ifdef ACX_MEM -+ u32 acx_txbuf_start; -+ int acx_txbuf_numblocks; -+ u32 acx_txbuf_free; /* addr of head of free list */ -+ int acx_txbuf_blocks_free; /* how many are still open */ -+ queueindicator_t *acx_queue_indicator; -+#endif -+ -+ /*** Card Rx/Tx management ***/ -+ u16 rx_config_1; -+ u16 rx_config_2; -+ u16 memblocksize; -+ unsigned int tx_free; -+ unsigned int tx_head; /* keep as close as possible to Tx stuff below (cache line) */ -+ u16 phy_header_len; -+ -+/************************************************************************* -+ *** PCI/USB/... must be last or else hw agnostic code breaks horribly *** -+ *************************************************************************/ -+ -+ /* hack to let common code compile. FIXME */ -+ dma_addr_t rxhostdesc_startphy; -+ -+ /*** PCI stuff ***/ -+#if defined(ACX_PCI) || defined(ACX_MEM) -+ /* pointers to tx buffers, tx host descriptors (in host memory) -+ ** and tx descs in device memory */ -+ unsigned int tx_tail; -+ u8 *txbuf_start; -+ txhostdesc_t *txhostdesc_start; -+ txdesc_t *txdesc_start; /* points to PCI-mapped memory */ -+ dma_addr_t txbuf_startphy; -+ dma_addr_t txhostdesc_startphy; -+ /* sizes of above host memory areas */ -+ unsigned int txbuf_area_size; -+ unsigned int txhostdesc_area_size; -+ -+ unsigned int txdesc_size; /* size of txdesc; ACX111 = ACX100 + 4 */ -+ client_t *txc[TX_CNT]; -+ u16 txr[TX_CNT]; -+ -+ /* same for rx */ -+ unsigned int rx_tail; -+ rxbuffer_t *rxbuf_start; -+ rxhostdesc_t *rxhostdesc_start; -+ rxdesc_t *rxdesc_start; -+ /* physical addresses of above host memory areas */ -+ dma_addr_t rxbuf_startphy; -+ /* dma_addr_t rxhostdesc_startphy; */ -+ unsigned int rxbuf_area_size; -+ unsigned int rxhostdesc_area_size; -+ -+ u8 need_radio_fw; -+ u8 irqs_active; /* whether irq sending is activated */ -+ -+ const u16 *io; /* points to ACX100 or ACX111 PCI I/O register address set */ -+ -+#ifdef ACX_PCI -+ struct pci_dev *pdev; -+#endif -+#ifdef ACX_MEM -+ struct device *dev; -+#endif -+ -+#ifdef ACX_PCI -+ unsigned long membase; -+#endif -+#ifdef ACX_MEM -+ volatile u32 *membase; -+#endif -+ unsigned long membase2; -+#ifdef ACX_PCI -+ void __iomem *iobase; -+#endif -+#ifdef ACX_MEM -+ volatile u32 *iobase; -+#endif -+ void __iomem *iobase2; -+ /* command interface */ -+ u8 __iomem *cmd_area; -+ u8 __iomem *info_area; -+ -+ u16 irq_mask; /* interrupt types to mask out (not wanted) with many IRQs activated */ -+ u16 irq_mask_off; /* interrupt types to mask out (not wanted) with IRQs off */ -+ unsigned int irq_loops_this_jiffy; -+ unsigned long irq_last_jiffies; -+#endif -+ -+ /*** USB stuff ***/ -+#ifdef ACX_USB -+ struct usb_device *usbdev; -+ -+ rxbuffer_t rxtruncbuf; -+ -+ usb_tx_t *usb_tx; -+ usb_rx_t *usb_rx; -+ -+ int bulkinep; /* bulk-in endpoint */ -+ int bulkoutep; /* bulk-out endpoint */ -+ int rxtruncsize; -+#endif -+ -+}; -+ -+static inline acx_device_t* -+ndev2adev(struct net_device *ndev) -+{ -+ return netdev_priv(ndev); -+} -+ -+ -+/* For use with ACX1xx_IE_RXCONFIG */ -+/* bit description -+ * 13 include additional header (length etc.) *required* -+ * struct is defined in 'struct rxbuffer' -+ * is this bit acx100 only? does acx111 always put the header, -+ * and bit setting is irrelevant? --vda -+ * 10 receive frames only with SSID used in last join cmd -+ * 9 discard broadcast -+ * 8 receive packets for multicast address 1 -+ * 7 receive packets for multicast address 0 -+ * 6 discard all multicast packets -+ * 5 discard frames from foreign BSSID -+ * 4 discard frames with foreign destination MAC address -+ * 3 promiscuous mode (receive ALL frames, disable filter) -+ * 2 include FCS -+ * 1 include phy header -+ * 0 ??? -+ */ -+#define RX_CFG1_INCLUDE_RXBUF_HDR 0x2000 /* ACX100 only */ -+#define RX_CFG1_FILTER_SSID 0x0400 -+#define RX_CFG1_FILTER_BCAST 0x0200 -+#define RX_CFG1_RCV_MC_ADDR1 0x0100 -+#define RX_CFG1_RCV_MC_ADDR0 0x0080 -+#define RX_CFG1_FILTER_ALL_MULTI 0x0040 -+#define RX_CFG1_FILTER_BSSID 0x0020 -+#define RX_CFG1_FILTER_MAC 0x0010 -+#define RX_CFG1_RCV_PROMISCUOUS 0x0008 -+#define RX_CFG1_INCLUDE_FCS 0x0004 -+#define RX_CFG1_INCLUDE_PHY_HDR (WANT_PHY_HDR ? 0x0002 : 0) -+/* bit description -+ * 11 receive association requests etc. -+ * 10 receive authentication frames -+ * 9 receive beacon frames -+ * 8 receive contention free packets -+ * 7 receive control frames -+ * 6 receive data frames -+ * 5 receive broken frames -+ * 4 receive management frames -+ * 3 receive probe requests -+ * 2 receive probe responses -+ * 1 receive RTS/CTS/ACK frames -+ * 0 receive other -+ */ -+#define RX_CFG2_RCV_ASSOC_REQ 0x0800 -+#define RX_CFG2_RCV_AUTH_FRAMES 0x0400 -+#define RX_CFG2_RCV_BEACON_FRAMES 0x0200 -+#define RX_CFG2_RCV_CONTENTION_FREE 0x0100 -+#define RX_CFG2_RCV_CTRL_FRAMES 0x0080 -+#define RX_CFG2_RCV_DATA_FRAMES 0x0040 -+#define RX_CFG2_RCV_BROKEN_FRAMES 0x0020 -+#define RX_CFG2_RCV_MGMT_FRAMES 0x0010 -+#define RX_CFG2_RCV_PROBE_REQ 0x0008 -+#define RX_CFG2_RCV_PROBE_RESP 0x0004 -+#define RX_CFG2_RCV_ACK_FRAMES 0x0002 -+#define RX_CFG2_RCV_OTHER 0x0001 -+ -+/* For use with ACX1xx_IE_FEATURE_CONFIG */ -+#define FEATURE1_80MHZ_CLOCK 0x00000040L -+#define FEATURE1_4X 0x00000020L -+#define FEATURE1_LOW_RX 0x00000008L -+#define FEATURE1_EXTRA_LOW_RX 0x00000001L -+ -+#define FEATURE2_SNIFFER 0x00000080L -+#define FEATURE2_NO_TXCRYPT 0x00000001L -+ -+/*-- get and set mask values --*/ -+#define GETSET_LED_POWER 0x00000001L -+#define GETSET_STATION_ID 0x00000002L -+#define SET_TEMPLATES 0x00000004L -+#define SET_STA_LIST 0x00000008L -+#define GETSET_TX 0x00000010L -+#define GETSET_RX 0x00000020L -+#define SET_RXCONFIG 0x00000040L -+#define GETSET_ANTENNA 0x00000080L -+#define GETSET_SENSITIVITY 0x00000100L -+#define GETSET_TXPOWER 0x00000200L -+#define GETSET_ED_THRESH 0x00000400L -+#define GETSET_CCA 0x00000800L -+#define GETSET_POWER_80211 0x00001000L -+#define GETSET_RETRY 0x00002000L -+#define GETSET_REG_DOMAIN 0x00004000L -+#define GETSET_CHANNEL 0x00008000L -+/* Used when ESSID changes etc and we need to scan for AP anew */ -+#define GETSET_RESCAN 0x00010000L -+#define GETSET_MODE 0x00020000L -+#define GETSET_WEP 0x00040000L -+#define SET_WEP_OPTIONS 0x00080000L -+#define SET_MSDU_LIFETIME 0x00100000L -+#define SET_RATE_FALLBACK 0x00200000L -+ -+/* keep in sync with the above */ -+#define GETSET_ALL (0 \ -+/* GETSET_LED_POWER */ | 0x00000001L \ -+/* GETSET_STATION_ID */ | 0x00000002L \ -+/* SET_TEMPLATES */ | 0x00000004L \ -+/* SET_STA_LIST */ | 0x00000008L \ -+/* GETSET_TX */ | 0x00000010L \ -+/* GETSET_RX */ | 0x00000020L \ -+/* SET_RXCONFIG */ | 0x00000040L \ -+/* GETSET_ANTENNA */ | 0x00000080L \ -+/* GETSET_SENSITIVITY */| 0x00000100L \ -+/* GETSET_TXPOWER */ | 0x00000200L \ -+/* GETSET_ED_THRESH */ | 0x00000400L \ -+/* GETSET_CCA */ | 0x00000800L \ -+/* GETSET_POWER_80211 */| 0x00001000L \ -+/* GETSET_RETRY */ | 0x00002000L \ -+/* GETSET_REG_DOMAIN */ | 0x00004000L \ -+/* GETSET_CHANNEL */ | 0x00008000L \ -+/* GETSET_RESCAN */ | 0x00010000L \ -+/* GETSET_MODE */ | 0x00020000L \ -+/* GETSET_WEP */ | 0x00040000L \ -+/* SET_WEP_OPTIONS */ | 0x00080000L \ -+/* SET_MSDU_LIFETIME */ | 0x00100000L \ -+/* SET_RATE_FALLBACK */ | 0x00200000L \ -+ ) -+ -+ -+/*********************************************************************** -+** Firmware loading -+*/ -+#include /* request_firmware() */ -+#include /* struct pci_device */ -+ -+ -+/*********************************************************************** -+*/ -+typedef struct acx100_ie_memblocksize { -+ u16 type; -+ u16 len; -+ u16 size; -+} ACX_PACKED acx100_ie_memblocksize_t; -+ -+typedef struct acx100_ie_queueconfig { -+ u16 type; -+ u16 len; -+ u32 AreaSize; -+ u32 RxQueueStart; -+ u8 QueueOptions; -+ u8 NumTxQueues; -+ u8 NumRxDesc; /* for USB only */ -+ u8 pad1; -+ u32 QueueEnd; -+ u32 HostQueueEnd; /* QueueEnd2 */ -+ u32 TxQueueStart; -+ u8 TxQueuePri; -+ u8 NumTxDesc; -+ u16 pad2; -+} ACX_PACKED acx100_ie_queueconfig_t; -+ -+typedef struct acx111_ie_queueconfig { -+ u16 type; -+ u16 len; -+ u32 tx_memory_block_address; -+ u32 rx_memory_block_address; -+ u32 rx1_queue_address; -+ u32 reserved1; -+ u32 tx1_queue_address; -+ u8 tx1_attributes; -+ u16 reserved2; -+ u8 reserved3; -+} ACX_PACKED acx111_ie_queueconfig_t; -+ -+typedef struct acx100_ie_memconfigoption { -+ u16 type; -+ u16 len; -+ u32 DMA_config; -+ acx_ptr pRxHostDesc; -+ u32 rx_mem; -+ u32 tx_mem; -+ u16 RxBlockNum; -+ u16 TxBlockNum; -+} ACX_PACKED acx100_ie_memconfigoption_t; -+ -+typedef struct acx111_ie_memoryconfig { -+ u16 type; -+ u16 len; -+ u16 no_of_stations; -+ u16 memory_block_size; -+ u8 tx_rx_memory_block_allocation; -+ u8 count_rx_queues; -+ u8 count_tx_queues; -+ u8 options; -+ u8 fragmentation; -+ u16 reserved1; -+ u8 reserved2; -+ -+ /* start of rx1 block */ -+ u8 rx_queue1_count_descs; -+ u8 rx_queue1_reserved1; -+ u8 rx_queue1_type; /* must be set to 7 */ -+ u8 rx_queue1_prio; /* must be set to 0 */ -+ acx_ptr rx_queue1_host_rx_start; -+ /* end of rx1 block */ -+ -+ /* start of tx1 block */ -+ u8 tx_queue1_count_descs; -+ u8 tx_queue1_reserved1; -+ u8 tx_queue1_reserved2; -+ u8 tx_queue1_attributes; -+ /* end of tx1 block */ -+} ACX_PACKED acx111_ie_memoryconfig_t; -+ -+typedef struct acx_ie_memmap { -+ u16 type; -+ u16 len; -+ u32 CodeStart; -+ u32 CodeEnd; -+ u32 WEPCacheStart; -+ u32 WEPCacheEnd; -+ u32 PacketTemplateStart; -+ u32 PacketTemplateEnd; -+ u32 QueueStart; -+ u32 QueueEnd; -+ u32 PoolStart; -+ u32 PoolEnd; -+} ACX_PACKED acx_ie_memmap_t; -+ -+typedef struct acx111_ie_feature_config { -+ u16 type; -+ u16 len; -+ u32 feature_options; -+ u32 data_flow_options; -+} ACX_PACKED acx111_ie_feature_config_t; -+ -+typedef struct acx111_ie_tx_level { -+ u16 type; -+ u16 len; -+ u8 level; -+} ACX_PACKED acx111_ie_tx_level_t; -+ -+#define PS_CFG_ENABLE 0x80 -+#define PS_CFG_PENDING 0x40 /* status flag when entering PS */ -+#define PS_CFG_WAKEUP_MODE_MASK 0x07 -+#define PS_CFG_WAKEUP_BY_HOST 0x03 -+#define PS_CFG_WAKEUP_EACH_ITVL 0x02 -+#define PS_CFG_WAKEUP_ON_DTIM 0x01 -+#define PS_CFG_WAKEUP_ALL_BEAC 0x00 -+ -+/* Enhanced PS mode: sleep until Rx Beacon w/ the STA's AID bit set -+** in the TIM; newer firmwares only(?) */ -+#define PS_OPT_ENA_ENHANCED_PS 0x04 -+#define PS_OPT_TX_PSPOLL 0x02 /* send PSPoll frame to fetch waiting frames from AP (on frame with matching AID) */ -+#define PS_OPT_STILL_RCV_BCASTS 0x01 -+ -+typedef struct acx100_ie_powersave { -+ u16 type; -+ u16 len; -+ u8 wakeup_cfg; -+ u8 listen_interval; /* for EACH_ITVL: wake up every "beacon units" interval */ -+ u8 options; -+ u8 hangover_period; /* remaining wake time after Tx MPDU w/ PS bit, in values of 1/1024 seconds */ -+ u16 enhanced_ps_transition_time; /* rem. wake time for Enh. PS */ -+} ACX_PACKED acx100_ie_powersave_t; -+ -+typedef struct acx111_ie_powersave { -+ u16 type; -+ u16 len; -+ u8 wakeup_cfg; -+ u8 listen_interval; /* for EACH_ITVL: wake up every "beacon units" interval */ -+ u8 options; -+ u8 hangover_period; /* remaining wake time after Tx MPDU w/ PS bit, in values of 1/1024 seconds */ -+ u32 beacon_rx_time; -+ u32 enhanced_ps_transition_time; /* rem. wake time for Enh. PS */ -+} ACX_PACKED acx111_ie_powersave_t; -+ -+ -+/*********************************************************************** -+** Commands and template structures -+*/ -+ -+/* -+** SCAN command structure -+** -+** even though acx100 scan rates match RATE100 constants, -+** acx111 ones do not match! Therefore we do not use RATE100 #defines */ -+#define ACX_SCAN_RATE_1 10 -+#define ACX_SCAN_RATE_2 20 -+#define ACX_SCAN_RATE_5 55 -+#define ACX_SCAN_RATE_11 110 -+#define ACX_SCAN_RATE_22 220 -+#define ACX_SCAN_RATE_PBCC 0x80 /* OR with this if needed */ -+#define ACX_SCAN_OPT_ACTIVE 0x00 /* a bit mask */ -+#define ACX_SCAN_OPT_PASSIVE 0x01 -+/* Background scan: we go into Power Save mode (by transmitting -+** NULL data frame to AP with the power mgmt bit set), do the scan, -+** and then exit Power Save mode. A plus is that AP buffers frames -+** for us while we do background scan. Thus we avoid frame losses. -+** Background scan can be active or passive, just like normal one */ -+#define ACX_SCAN_OPT_BACKGROUND 0x02 -+typedef struct acx100_scan { -+ u16 count; /* number of scans to do, 0xffff == continuous */ -+ u16 start_chan; -+ u16 flags; /* channel list mask; 0x8000 == all channels? */ -+ u8 max_rate; /* max. probe rate */ -+ u8 options; /* bit mask, see defines above */ -+ u16 chan_duration; -+ u16 max_probe_delay; -+} ACX_PACKED acx100_scan_t; /* length 0xc */ -+ -+#define ACX111_SCAN_RATE_6 0x0B -+#define ACX111_SCAN_RATE_9 0x0F -+#define ACX111_SCAN_RATE_12 0x0A -+#define ACX111_SCAN_RATE_18 0x0E -+#define ACX111_SCAN_RATE_24 0x09 -+#define ACX111_SCAN_RATE_36 0x0D -+#define ACX111_SCAN_RATE_48 0x08 -+#define ACX111_SCAN_RATE_54 0x0C -+#define ACX111_SCAN_OPT_5GHZ 0x04 /* else 2.4GHZ */ -+#define ACX111_SCAN_MOD_SHORTPRE 0x01 /* you can combine SHORTPRE and PBCC */ -+#define ACX111_SCAN_MOD_PBCC 0x80 -+#define ACX111_SCAN_MOD_OFDM 0x40 -+typedef struct acx111_scan { -+ u16 count; /* number of scans to do */ -+ u8 channel_list_select; /* 0: scan all channels, 1: from chan_list only */ -+ u16 reserved1; -+ u8 reserved2; -+ u8 rate; /* rate for probe requests (if active scan) */ -+ u8 options; /* bit mask, see defines above */ -+ u16 chan_duration; /* min time to wait for reply on one channel (in TU) */ -+ /* (active scan only) (802.11 section 11.1.3.2.2) */ -+ u16 max_probe_delay; /* max time to wait for reply on one channel (active scan) */ -+ /* time to listen on a channel (passive scan) */ -+ u8 modulation; -+ u8 channel_list[26]; /* bits 7:0 first byte: channels 8:1 */ -+ /* bits 7:0 second byte: channels 16:9 */ -+ /* 26 bytes is enough to cover 802.11a */ -+} ACX_PACKED acx111_scan_t; -+ -+ -+/* -+** Radio calibration command structure -+*/ -+typedef struct acx111_cmd_radiocalib { -+/* 0x80000000 == automatic calibration by firmware, according to interval; -+ * bits 0..3: select calibration methods to go through: -+ * calib based on DC, AfeDC, Tx mismatch, Tx equilization */ -+ u32 methods; -+ u32 interval; -+} ACX_PACKED acx111_cmd_radiocalib_t; -+ -+ -+/* -+** Packet template structures -+** -+** Packet templates store contents of Beacon, Probe response, Probe request, -+** Null data frame, and TIM data frame. Firmware automatically transmits -+** contents of template at appropriate time: -+** - Beacon: when configured as AP or Ad-hoc -+** - Probe response: when configured as AP or Ad-hoc, whenever -+** a Probe request frame is received -+** - Probe request: when host issues SCAN command (active) -+** - Null data frame: when entering 802.11 power save mode -+** - TIM data: at the end of Beacon frames (if no TIM template -+** is configured, then transmits default TIM) -+** NB: -+** - size field must be set to size of actual template -+** (NOT sizeof(struct) - templates are variable in length), -+** size field is not itself counted. -+** - members flagged with an asterisk must be initialized with host, -+** rest must be zero filled. -+** - variable length fields shown only in comments */ -+typedef struct acx_template_tim { -+ u16 size; -+ u8 tim_eid; /* 00 1 TIM IE ID * */ -+ u8 len; /* 01 1 Length * */ -+ u8 dtim_cnt; /* 02 1 DTIM Count */ -+ u8 dtim_period; /* 03 1 DTIM Period */ -+ u8 bitmap_ctrl; /* 04 1 Bitmap Control * (except bit0) */ -+ /* 05 n Partial Virtual Bitmap * */ -+ u8 variable[0x100 - 1-1-1-1-1]; -+} ACX_PACKED acx_template_tim_t; -+ -+typedef struct acx_template_probereq { -+ u16 size; -+ u16 fc; /* 00 2 fc * */ -+ u16 dur; /* 02 2 Duration */ -+ u8 da[6]; /* 04 6 Destination Address * */ -+ u8 sa[6]; /* 0A 6 Source Address * */ -+ u8 bssid[6]; /* 10 6 BSSID * */ -+ u16 seq; /* 16 2 Sequence Control */ -+ /* 18 n SSID * */ -+ /* nn n Supported Rates * */ -+ u8 variable[0x44 - 2-2-6-6-6-2]; -+} ACX_PACKED acx_template_probereq_t; -+ -+typedef struct acx_template_proberesp { -+ u16 size; -+ u16 fc; /* 00 2 fc * (bits [15:12] and [10:8] per 802.11 section 7.1.3.1) */ -+ u16 dur; /* 02 2 Duration */ -+ u8 da[6]; /* 04 6 Destination Address */ -+ u8 sa[6]; /* 0A 6 Source Address */ -+ u8 bssid[6]; /* 10 6 BSSID */ -+ u16 seq; /* 16 2 Sequence Control */ -+ u8 timestamp[8];/* 18 8 Timestamp */ -+ u16 beacon_interval; /* 20 2 Beacon Interval * */ -+ u16 cap; /* 22 2 Capability Information * */ -+ /* 24 n SSID * */ -+ /* nn n Supported Rates * */ -+ /* nn 1 DS Parameter Set * */ -+ u8 variable[0x54 - 2-2-6-6-6-2-8-2-2]; -+} ACX_PACKED acx_template_proberesp_t; -+#define acx_template_beacon_t acx_template_proberesp_t -+#define acx_template_beacon acx_template_proberesp -+ -+typedef struct acx_template_nullframe { -+ u16 size; -+ struct wlan_hdr_a3 hdr; -+} ACX_PACKED acx_template_nullframe_t; -+ -+ -+/* -+** JOIN command structure -+** -+** as opposed to acx100, acx111 dtim interval is AFTER rates_basic111. -+** NOTE: took me about an hour to get !@#$%^& packing right --> struct packing is eeeeevil... */ -+typedef struct acx_joinbss { -+ u8 bssid[ETH_ALEN]; -+ u16 beacon_interval; -+ union { -+ struct { -+ u8 dtim_interval; -+ u8 rates_basic; -+ u8 rates_supported; -+ /* -+ * ARM compiler doesn't pack correctly unless unions -+ * inside structures are multiples of 4 bytes. Ugh. -+ */ -+ u8 genfrm_txrate; /* generated frame (bcn, proberesp, RTS, PSpoll) tx rate */ -+ } ACX_PACKED acx100; -+ struct { -+ u16 rates_basic; -+ u8 dtim_interval; -+ u8 genfrm_txrate; /* generated frame (bcn, proberesp, RTS, PSpoll) tx rate */ -+ } ACX_PACKED acx111; -+ /* -+ * ARM compiler doesn't pack correctly unles unions are aligned on -+ * 4 byte boundaries and are multiples of 4 bytes. -+ */ -+ struct { -+ u8 d1; -+ u8 d2; -+ u8 d3; -+ u8 genfrm_txrate; -+ } ACX_PACKED txrate; -+ } ACX_PACKED u; -+ u8 genfrm_mod_pre; /* generated frame modulation/preamble: -+ ** bit7: PBCC, bit6: OFDM (else CCK/DQPSK/DBPSK) -+ ** bit5: short pre */ -+ u8 macmode; /* BSS Type, must be one of ACX_MODE_xxx */ -+ u8 channel; -+ u8 essid_len; -+ char essid[IW_ESSID_MAX_SIZE]; -+} ACX_PACKED acx_joinbss_t; -+ -+#define JOINBSS_RATES_1 0x01 -+#define JOINBSS_RATES_2 0x02 -+#define JOINBSS_RATES_5 0x04 -+#define JOINBSS_RATES_11 0x08 -+#define JOINBSS_RATES_22 0x10 -+ -+/* Looks like missing bits are used to indicate 11g rates! -+** (it follows from the fact that constants below match 1:1 to RATE111_nn) -+** This was actually seen! Look at that Assoc Request sent by acx111, -+** it _does_ contain 11g rates in basic set: -+01:30:20.070772 Beacon (xxx) [1.0* 2.0* 5.5* 11.0* 6.0* 9.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ESS CH: 1 -+01:30:20.074425 Authentication (Open System)-1: Succesful -+01:30:20.076539 Authentication (Open System)-2: -+01:30:20.076620 Acknowledgment -+01:30:20.088546 Assoc Request (xxx) [1.0* 2.0* 5.5* 6.0* 9.0* 11.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] -+01:30:20.122413 Assoc Response AID(1) :: Succesful -+01:30:20.122679 Acknowledgment -+01:30:20.173204 Beacon (xxx) [1.0* 2.0* 5.5* 11.0* 6.0* 9.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ESS CH: 1 -+*/ -+#define JOINBSS_RATES_BASIC111_1 0x0001 -+#define JOINBSS_RATES_BASIC111_2 0x0002 -+#define JOINBSS_RATES_BASIC111_5 0x0004 -+#define JOINBSS_RATES_BASIC111_11 0x0020 -+#define JOINBSS_RATES_BASIC111_22 0x0100 -+ -+ -+/*********************************************************************** -+*/ -+typedef struct mem_read_write { -+ u16 addr; -+ u16 type; /* 0x0 int. RAM / 0xffff MAC reg. / 0x81 PHY RAM / 0x82 PHY reg.; or maybe it's actually 0x30 for MAC? Better verify it by writing and reading back and checking whether the value holds! */ -+ u32 len; -+ u32 data; -+} ACX_PACKED mem_read_write_t; -+ -+typedef struct firmware_image { -+ u32 chksum; -+ u32 size; -+ u8 data[1]; /* the byte array of the actual firmware... */ -+} ACX_PACKED firmware_image_t; -+ -+typedef struct acx_cmd_radioinit { -+ u32 offset; -+ u32 len; -+} ACX_PACKED acx_cmd_radioinit_t; -+ -+typedef struct acx100_ie_wep_options { -+ u16 type; -+ u16 len; -+ u16 NumKeys; /* max # of keys */ -+ u8 WEPOption; /* 0 == decrypt default key only, 1 == override decrypt */ -+ u8 Pad; /* used only for acx111 */ -+} ACX_PACKED acx100_ie_wep_options_t; -+ -+typedef struct ie_dot11WEPDefaultKey { -+ u16 type; -+ u16 len; -+ u8 action; -+ u8 keySize; -+ u8 defaultKeyNum; -+ u8 key[29]; /* check this! was Key[19] */ -+} ACX_PACKED ie_dot11WEPDefaultKey_t; -+ -+typedef struct acx111WEPDefaultKey { -+ u8 MacAddr[ETH_ALEN]; -+ u16 action; /* NOTE: this is a u16, NOT a u8!! */ -+ u16 reserved; -+ u8 keySize; -+ u8 type; -+ u8 index; -+ u8 defaultKeyNum; -+ u8 counter[6]; -+ u8 key[32]; /* up to 32 bytes (for TKIP!) */ -+} ACX_PACKED acx111WEPDefaultKey_t; -+ -+typedef struct ie_dot11WEPDefaultKeyID { -+ u16 type; -+ u16 len; -+ u8 KeyID; -+} ACX_PACKED ie_dot11WEPDefaultKeyID_t; -+ -+typedef struct acx100_cmd_wep_mgmt { -+ u8 MacAddr[ETH_ALEN]; -+ u16 Action; -+ u16 KeySize; -+ u8 Key[29]; /* 29*8 == 232bits == WEP256 */ -+} ACX_PACKED acx100_cmd_wep_mgmt_t; -+ -+typedef struct acx_ie_generic { -+ u16 type; -+ u16 len; -+ union { -+ /* Association ID IE: just a 16bit value: */ -+ u16 aid; -+ /* generic member for quick implementation of commands */ -+ u8 bytes[32]; -+ } ACX_PACKED m; -+} ACX_PACKED acx_ie_generic_t; -+ -+/*********************************************************************** -+*/ -+#define CHECK_SIZEOF(type,size) { \ -+ extern void BUG_bad_size_for_##type(void); \ -+ if (sizeof(type)!=(size)) BUG_bad_size_for_##type(); \ -+} -+ -+static inline void -+acx_struct_size_check(void) -+{ -+ CHECK_SIZEOF(txdesc_t, 0x30); -+ CHECK_SIZEOF(acx100_ie_memconfigoption_t, 24); -+ CHECK_SIZEOF(acx100_ie_queueconfig_t, 0x20); -+ CHECK_SIZEOF(acx_joinbss_t, 0x30); -+ /* IEs need 4 bytes for (type,len) tuple */ -+ CHECK_SIZEOF(acx111_ie_configoption_t, ACX111_IE_CONFIG_OPTIONS_LEN + 4); -+} -+ -+ -+/*********************************************************************** -+** Global data -+*/ -+extern const u8 acx_bitpos2ratebyte[]; -+extern const u8 acx_bitpos2rate100[]; -+ -+extern const u8 acx_reg_domain_ids[]; -+extern const char * const acx_reg_domain_strings[]; -+enum { -+ acx_reg_domain_ids_len = 8 -+}; -+ -+extern const struct iw_handler_def acx_ioctl_handler_def; -Index: linux-2.6.22/drivers/net/wireless/acx/common.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/common.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,7388 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx_hw.h" -+#include "acx.h" -+ -+ -+/*********************************************************************** -+*/ -+static client_t *acx_l_sta_list_alloc(acx_device_t *adev); -+static client_t *acx_l_sta_list_get_from_hash(acx_device_t *adev, const u8 *address); -+ -+static int acx_l_process_data_frame_master(acx_device_t *adev, rxbuffer_t *rxbuf); -+static int acx_l_process_data_frame_client(acx_device_t *adev, rxbuffer_t *rxbuf); -+/* static int acx_l_process_NULL_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala); */ -+static int acx_l_process_mgmt_frame(acx_device_t *adev, rxbuffer_t *rxbuf); -+static void acx_l_process_disassoc_from_sta(acx_device_t *adev, const wlan_fr_disassoc_t *req); -+static void acx_l_process_disassoc_from_ap(acx_device_t *adev, const wlan_fr_disassoc_t *req); -+static void acx_l_process_deauth_from_sta(acx_device_t *adev, const wlan_fr_deauthen_t *req); -+static void acx_l_process_deauth_from_ap(acx_device_t *adev, const wlan_fr_deauthen_t *req); -+static int acx_l_process_probe_response(acx_device_t *adev, wlan_fr_proberesp_t *req, const rxbuffer_t *rxbuf); -+static int acx_l_process_assocresp(acx_device_t *adev, const wlan_fr_assocresp_t *req); -+static int acx_l_process_reassocresp(acx_device_t *adev, const wlan_fr_reassocresp_t *req); -+static int acx_l_process_authen(acx_device_t *adev, const wlan_fr_authen_t *req); -+static int acx_l_transmit_assocresp(acx_device_t *adev, const wlan_fr_assocreq_t *req); -+static int acx_l_transmit_reassocresp(acx_device_t *adev, const wlan_fr_reassocreq_t *req); -+static int acx_l_transmit_deauthen(acx_device_t *adev, const u8 *addr, u16 reason); -+static int acx_l_transmit_authen1(acx_device_t *adev); -+static int acx_l_transmit_authen2(acx_device_t *adev, const wlan_fr_authen_t *req, client_t *clt); -+static int acx_l_transmit_authen3(acx_device_t *adev, const wlan_fr_authen_t *req); -+static int acx_l_transmit_authen4(acx_device_t *adev, const wlan_fr_authen_t *req); -+static int acx_l_transmit_assoc_req(acx_device_t *adev); -+ -+ -+/*********************************************************************** -+*/ -+#if ACX_DEBUG -+unsigned int acx_debug /* will add __read_mostly later */ = ACX_DEFAULT_MSG; -+/* parameter is 'debug', corresponding var is acx_debug */ -+module_param_named(debug, acx_debug, uint, 0); -+MODULE_PARM_DESC(debug, "Debug level mask (see L_xxx constants)"); -+#endif -+ -+#ifdef MODULE_LICENSE -+MODULE_LICENSE("Dual MPL/GPL"); -+#endif -+/* USB had this: MODULE_AUTHOR("Martin Wawro "); */ -+MODULE_AUTHOR("ACX100 Open Source Driver development team"); -+MODULE_DESCRIPTION("Driver for TI ACX1xx based wireless cards (CardBus/PCI/USB)"); -+ -+ -+/*********************************************************************** -+*/ -+/* Probably a number of acx's intermediate buffers for USB transfers, -+** not to be confused with number of descriptors in tx/rx rings -+** (which are not directly accessible to host in USB devices) */ -+#define USB_RX_CNT 10 -+#define USB_TX_CNT 10 -+ -+ -+/*********************************************************************** -+*/ -+ -+/* minutes to wait until next radio recalibration: */ -+#define RECALIB_PAUSE 5 -+ -+/* Please keep acx_reg_domain_ids_len in sync... */ -+const u8 acx_reg_domain_ids[acx_reg_domain_ids_len] = -+ { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40, 0x41, 0x51 }; -+static const u16 reg_domain_channel_masks[acx_reg_domain_ids_len] = -+#ifdef ACX_ALLOW_ALLCHANNELS -+ { 0x3fff, 0x07ff, 0x1fff, 0x0600, 0x1e00, 0x2000, 0x3fff, 0x01fc }; -+#else -+ { 0x07ff, 0x07ff, 0x1fff, 0x0600, 0x1e00, 0x2000, 0x3fff, 0x01fc }; -+#endif -+const char * const -+acx_reg_domain_strings[] = { -+ /* 0 */ " 1-11 FCC (USA)", -+ /* 1 */ " 1-11 DOC/IC (Canada)", -+/* BTW: WLAN use in ETSI is regulated by ETSI standard EN 300 328-2 V1.1.2 */ -+ /* 2 */ " 1-13 ETSI (Europe)", -+ /* 3 */ "10-11 Spain", -+ /* 4 */ "10-13 France", -+ /* 5 */ " 14 MKK (Japan)", -+ /* 6 */ " 1-14 MKK1", -+ /* 7 */ " 3-9 Israel (not all firmware versions)", -+ NULL /* needs to remain as last entry */ -+}; -+ -+ -+ -+/*********************************************************************** -+** Debugging support -+*/ -+#ifdef PARANOID_LOCKING -+static unsigned max_lock_time; -+static unsigned max_sem_time; -+ -+void -+acx_lock_unhold() { max_lock_time = 0; } -+void -+acx_sem_unhold() { max_sem_time = 0; } -+ -+static inline const char* -+sanitize_str(const char *s) -+{ -+ const char* t = strrchr(s, '/'); -+ if (t) return t + 1; -+ return s; -+} -+ -+void -+acx_lock_debug(acx_device_t *adev, const char* where) -+{ -+ unsigned int count = 100*1000*1000; -+ where = sanitize_str(where); -+ while (--count) { -+ if (!spin_is_locked(&adev->lock)) break; -+ cpu_relax(); -+ } -+ if (!count) { -+ printk(KERN_EMERG "LOCKUP: already taken at %s!\n", adev->last_lock); -+ BUG(); -+ } -+ adev->last_lock = where; -+ rdtscl(adev->lock_time); -+} -+void -+acx_unlock_debug(acx_device_t *adev, const char* where) -+{ -+#ifdef SMP -+ if (!spin_is_locked(&adev->lock)) { -+ where = sanitize_str(where); -+ printk(KERN_EMERG "STRAY UNLOCK at %s!\n", where); -+ BUG(); -+ } -+#endif -+ if (acx_debug & L_LOCK) { -+ unsigned long diff; -+ rdtscl(diff); -+ diff -= adev->lock_time; -+ if (diff > max_lock_time) { -+ where = sanitize_str(where); -+ printk("max lock hold time %ld CPU ticks from %s " -+ "to %s\n", diff, adev->last_lock, where); -+ max_lock_time = diff; -+ } -+ } -+} -+void -+acx_down_debug(acx_device_t *adev, const char* where) -+{ -+ int sem_count; -+ unsigned long timeout = jiffies + 5*HZ; -+ -+ where = sanitize_str(where); -+ -+ for (;;) { -+ sem_count = atomic_read(&adev->sem.count); -+ if (sem_count) break; -+ if (time_after(jiffies, timeout)) -+ break; -+ msleep(5); -+ } -+ if (!sem_count) { -+ printk(KERN_EMERG "D STATE at %s! last sem at %s\n", -+ where, adev->last_sem); -+ dump_stack(); -+ } -+ adev->last_sem = where; -+ adev->sem_time = jiffies; -+ down(&adev->sem); -+ if (acx_debug & L_LOCK) { -+ printk("%s: sem_down %d -> %d\n", -+ where, sem_count, atomic_read(&adev->sem.count)); -+ } -+} -+void -+acx_up_debug(acx_device_t *adev, const char* where) -+{ -+ int sem_count = atomic_read(&adev->sem.count); -+ if (sem_count) { -+ where = sanitize_str(where); -+ printk(KERN_EMERG "STRAY UP at %s! sem.count=%d\n", where, sem_count); -+ dump_stack(); -+ } -+ if (acx_debug & L_LOCK) { -+ unsigned long diff = jiffies - adev->sem_time; -+ if (diff > max_sem_time) { -+ where = sanitize_str(where); -+ printk("max sem hold time %ld jiffies from %s " -+ "to %s\n", diff, adev->last_sem, where); -+ max_sem_time = diff; -+ } -+ } -+ up(&adev->sem); -+ if (acx_debug & L_LOCK) { -+ where = sanitize_str(where); -+ printk("%s: sem_up %d -> %d\n", -+ where, sem_count, atomic_read(&adev->sem.count)); -+ } -+} -+#endif /* PARANOID_LOCKING */ -+ -+ -+/*********************************************************************** -+*/ -+#if ACX_DEBUG > 1 -+ -+static int acx_debug_func_indent; -+#define DEBUG_TSC 0 -+#define FUNC_INDENT_INCREMENT 2 -+ -+#if DEBUG_TSC -+#define TIMESTAMP(d) unsigned long d; rdtscl(d) -+#else -+#define TIMESTAMP(d) unsigned long d = jiffies -+#endif -+ -+static const char -+spaces[] = " " " "; /* Nx10 spaces */ -+ -+void -+log_fn_enter(const char *funcname) -+{ -+ int indent; -+ TIMESTAMP(d); -+ -+ indent = acx_debug_func_indent; -+ if (indent >= sizeof(spaces)) -+ indent = sizeof(spaces)-1; -+ -+ printk("%08ld %s==> %s\n", -+ d % 100000000, -+ spaces + (sizeof(spaces)-1) - indent, -+ funcname -+ ); -+ -+ acx_debug_func_indent += FUNC_INDENT_INCREMENT; -+} -+void -+log_fn_exit(const char *funcname) -+{ -+ int indent; -+ TIMESTAMP(d); -+ -+ acx_debug_func_indent -= FUNC_INDENT_INCREMENT; -+ -+ indent = acx_debug_func_indent; -+ if (indent >= sizeof(spaces)) -+ indent = sizeof(spaces)-1; -+ -+ printk("%08ld %s<== %s\n", -+ d % 100000000, -+ spaces + (sizeof(spaces)-1) - indent, -+ funcname -+ ); -+} -+void -+log_fn_exit_v(const char *funcname, int v) -+{ -+ int indent; -+ TIMESTAMP(d); -+ -+ acx_debug_func_indent -= FUNC_INDENT_INCREMENT; -+ -+ indent = acx_debug_func_indent; -+ if (indent >= sizeof(spaces)) -+ indent = sizeof(spaces)-1; -+ -+ printk("%08ld %s<== %s: %08X\n", -+ d % 100000000, -+ spaces + (sizeof(spaces)-1) - indent, -+ funcname, -+ v -+ ); -+} -+#endif /* ACX_DEBUG > 1 */ -+ -+ -+/*********************************************************************** -+** Basically a msleep with logging -+*/ -+void -+acx_s_msleep(int ms) -+{ -+ FN_ENTER; -+ msleep(ms); -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** Not inlined: it's larger than it seems -+*/ -+void -+acx_print_mac(const char *head, const u8 *mac, const char *tail) -+{ -+ printk("%s"MACSTR"%s", head, MAC(mac), tail); -+} -+ -+ -+/*********************************************************************** -+** acx_get_status_name -+*/ -+static const char* -+acx_get_status_name(u16 status) -+{ -+ static const char * const str[] = { -+ "STOPPED", "SCANNING", "WAIT_AUTH", -+ "AUTHENTICATED", "ASSOCIATED", "INVALID??" -+ }; -+ if (status > VEC_SIZE(str)-1) -+ status = VEC_SIZE(str)-1; -+ -+ return str[status]; -+} -+ -+ -+/*********************************************************************** -+** acx_get_packet_type_string -+*/ -+#if ACX_DEBUG -+const char* -+acx_get_packet_type_string(u16 fc) -+{ -+ static const char * const mgmt_arr[] = { -+ "MGMT/AssocReq", "MGMT/AssocResp", "MGMT/ReassocReq", -+ "MGMT/ReassocResp", "MGMT/ProbeReq", "MGMT/ProbeResp", -+ "MGMT/UNKNOWN", "MGMT/UNKNOWN", "MGMT/Beacon", "MGMT/ATIM", -+ "MGMT/Disassoc", "MGMT/Authen", "MGMT/Deauthen" -+ }; -+ static const char * const ctl_arr[] = { -+ "CTL/PSPoll", "CTL/RTS", "CTL/CTS", "CTL/Ack", "CTL/CFEnd", -+ "CTL/CFEndCFAck" -+ }; -+ static const char * const data_arr[] = { -+ "DATA/DataOnly", "DATA/Data CFAck", "DATA/Data CFPoll", -+ "DATA/Data CFAck/CFPoll", "DATA/Null", "DATA/CFAck", -+ "DATA/CFPoll", "DATA/CFAck/CFPoll" -+ }; -+ const char *str; -+ u8 fstype = (WF_FC_FSTYPE & fc) >> 4; -+ u8 ctl; -+ -+ switch (WF_FC_FTYPE & fc) { -+ case WF_FTYPE_MGMT: -+ if (fstype < VEC_SIZE(mgmt_arr)) -+ str = mgmt_arr[fstype]; -+ else -+ str = "MGMT/UNKNOWN"; -+ break; -+ case WF_FTYPE_CTL: -+ ctl = fstype - 0x0a; -+ if (ctl < VEC_SIZE(ctl_arr)) -+ str = ctl_arr[ctl]; -+ else -+ str = "CTL/UNKNOWN"; -+ break; -+ case WF_FTYPE_DATA: -+ if (fstype < VEC_SIZE(data_arr)) -+ str = data_arr[fstype]; -+ else -+ str = "DATA/UNKNOWN"; -+ break; -+ default: -+ str = "UNKNOWN"; -+ break; -+ } -+ return str; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_wlan_reason_str -+*/ -+static inline const char* -+acx_wlan_reason_str(u16 reason) -+{ -+ static const char* const reason_str[] = { -+ /* 0 */ "?", -+ /* 1 */ "unspecified", -+ /* 2 */ "prev auth is not valid", -+ /* 3 */ "leaving BBS", -+ /* 4 */ "due to inactivity", -+ /* 5 */ "AP is busy", -+ /* 6 */ "got class 2 frame from non-auth'ed STA", -+ /* 7 */ "got class 3 frame from non-assoc'ed STA", -+ /* 8 */ "STA has left BSS", -+ /* 9 */ "assoc without auth is not allowed", -+ /* 10 */ "bad power setting (802.11h)", -+ /* 11 */ "bad channel (802.11i)", -+ /* 12 */ "?", -+ /* 13 */ "invalid IE", -+ /* 14 */ "MIC failure", -+ /* 15 */ "four-way handshake timeout", -+ /* 16 */ "group key handshake timeout", -+ /* 17 */ "IE is different", -+ /* 18 */ "invalid group cipher", -+ /* 19 */ "invalid pairwise cipher", -+ /* 20 */ "invalid AKMP", -+ /* 21 */ "unsupported RSN version", -+ /* 22 */ "invalid RSN IE cap", -+ /* 23 */ "802.1x failed", -+ /* 24 */ "cipher suite rejected" -+ }; -+ return reason < VEC_SIZE(reason_str) ? reason_str[reason] : "?"; -+} -+ -+ -+/*********************************************************************** -+** acx_cmd_status_str -+*/ -+const char* -+acx_cmd_status_str(unsigned int state) -+{ -+ static const char * const cmd_error_strings[] = { -+ "Idle", -+ "Success", -+ "Unknown Command", -+ "Invalid Information Element", -+ "Channel rejected", -+ "Channel invalid in current regulatory domain", -+ "MAC invalid", -+ "Command rejected (read-only information element)", -+ "Command rejected", -+ "Already asleep", -+ "TX in progress", -+ "Already awake", -+ "Write only", -+ "RX in progress", -+ "Invalid parameter", -+ "Scan in progress", -+ "Failed" -+ }; -+ return state < VEC_SIZE(cmd_error_strings) ? -+ cmd_error_strings[state] : "?"; -+} -+ -+ -+/*********************************************************************** -+** get_status_string -+*/ -+static inline const char* -+get_status_string(unsigned int status) -+{ -+ /* A bit shortened, but hopefully still understandable */ -+ static const char * const status_str[] = { -+ /* 0 */ "Successful", -+ /* 1 */ "Unspecified failure", -+ /* 2 */ "reserved", -+ /* 3 */ "reserved", -+ /* 4 */ "reserved", -+ /* 5 */ "reserved", -+ /* 6 */ "reserved", -+ /* 7 */ "reserved", -+ /* 8 */ "reserved", -+ /* 9 */ "reserved", -+ /*10 */ "Cannot support all requested capabilities in Capability Information field", -+ /*11 */ "Reassoc denied (reason outside of 802.11b scope)", -+ /*12 */ "Assoc denied (reason outside of 802.11b scope) -- maybe MAC filtering by peer?", -+ /*13 */ "Responding station doesnt support specified auth algorithm -- maybe WEP auth Open vs. Restricted?", -+ /*14 */ "Auth rejected: wrong transaction sequence number", -+ /*15 */ "Auth rejected: challenge failure", -+ /*16 */ "Auth rejected: timeout for next frame in sequence", -+ /*17 */ "Assoc denied: too many STAs on this AP", -+ /*18 */ "Assoc denied: requesting STA doesnt support all data rates in basic set", -+ /*19 */ "Assoc denied: requesting STA doesnt support Short Preamble", -+ /*20 */ "Assoc denied: requesting STA doesnt support PBCC Modulation", -+ /*21 */ "Assoc denied: requesting STA doesnt support Channel Agility" -+ /*22 */ "reserved", -+ /*23 */ "reserved", -+ /*24 */ "reserved", -+ /*25 */ "Assoc denied: requesting STA doesnt support Short Slot Time", -+ /*26 */ "Assoc denied: requesting STA doesnt support DSSS-OFDM" -+ }; -+ -+ return status_str[status < VEC_SIZE(status_str) ? status : 2]; -+} -+ -+ -+/*********************************************************************** -+*/ -+void -+acx_log_bad_eid(wlan_hdr_t* hdr, int len, wlan_ie_t* ie_ptr) -+{ -+ if (acx_debug & L_ASSOC) { -+ int offset = (u8*)ie_ptr - (u8*)hdr; -+ printk("acx: unknown EID %d in mgmt frame at offset %d. IE: ", -+ ie_ptr->eid, offset); -+ /* IE len can be bogus, IE can extend past packet end. Oh well... */ -+ acx_dump_bytes(ie_ptr, ie_ptr->len + 2); -+ if (acx_debug & L_DATA) { -+ printk("frame (%s): ", -+ acx_get_packet_type_string(le16_to_cpu(hdr->fc))); -+ acx_dump_bytes(hdr, len); -+ } -+ } -+} -+ -+ -+/*********************************************************************** -+*/ -+#if ACX_DEBUG -+void -+acx_dump_bytes(const void *data, int num) -+{ -+ const u8* ptr = (const u8*)data; -+ -+ if (num <= 0) { -+ printk("\n"); -+ return; -+ } -+ -+ while (num >= 16) { -+ printk( "%02X %02X %02X %02X %02X %02X %02X %02X " -+ "%02X %02X %02X %02X %02X %02X %02X %02X\n", -+ ptr[0], ptr[1], ptr[2], ptr[3], -+ ptr[4], ptr[5], ptr[6], ptr[7], -+ ptr[8], ptr[9], ptr[10], ptr[11], -+ ptr[12], ptr[13], ptr[14], ptr[15]); -+ num -= 16; -+ ptr += 16; -+ } -+ if (num > 0) { -+ while (--num > 0) -+ printk("%02X ", *ptr++); -+ printk("%02X\n", *ptr); -+ } -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_s_get_firmware_version -+*/ -+void -+acx_s_get_firmware_version(acx_device_t *adev) -+{ -+ fw_ver_t fw; -+ u8 hexarr[4] = { 0, 0, 0, 0 }; -+ int hexidx = 0, val = 0; -+ const char *num; -+ char c; -+ -+ FN_ENTER; -+ -+ memset(fw.fw_id, 'E', FW_ID_SIZE); -+ acx_s_interrogate(adev, &fw, ACX1xx_IE_FWREV); -+ memcpy(adev->firmware_version, fw.fw_id, FW_ID_SIZE); -+ adev->firmware_version[FW_ID_SIZE] = '\0'; -+ -+ log(L_DEBUG, "fw_ver: fw_id='%s' hw_id=%08X\n", -+ adev->firmware_version, fw.hw_id); -+ -+ if (strncmp(fw.fw_id, "Rev ", 4) != 0) { -+ printk("acx: strange firmware version string " -+ "'%s', please report\n", adev->firmware_version); -+ adev->firmware_numver = 0x01090407; /* assume 1.9.4.7 */ -+ } else { -+ num = &fw.fw_id[4]; -+ while (1) { -+ c = *num++; -+ if ((c == '.') || (c == '\0')) { -+ hexarr[hexidx++] = val; -+ if ((hexidx > 3) || (c == '\0')) /* end? */ -+ break; -+ val = 0; -+ continue; -+ } -+ if ((c >= '0') && (c <= '9')) -+ c -= '0'; -+ else -+ c = c - 'a' + (char)10; -+ val = val*16 + c; -+ } -+ -+ adev->firmware_numver = (u32)( -+ (hexarr[0] << 24) | (hexarr[1] << 16) -+ | (hexarr[2] << 8) | hexarr[3]); -+ log(L_DEBUG, "firmware_numver 0x%08X\n", adev->firmware_numver); -+ } -+ if (IS_ACX111(adev)) { -+ if (adev->firmware_numver == 0x00010011) { -+ /* This one does not survive floodpinging */ -+ printk("acx: firmware '%s' is known to be buggy, " -+ "please upgrade\n", adev->firmware_version); -+ } -+ } -+ -+ adev->firmware_id = le32_to_cpu(fw.hw_id); -+ -+ /* we're able to find out more detailed chip names now */ -+ switch (adev->firmware_id & 0xffff0000) { -+ case 0x01010000: -+ case 0x01020000: -+ adev->chip_name = "TNETW1100A"; -+ break; -+ case 0x01030000: -+ adev->chip_name = "TNETW1100B"; -+ break; -+ case 0x03000000: -+ case 0x03010000: -+ adev->chip_name = "TNETW1130"; -+ break; -+ case 0x04030000: /* 0x04030101 is TNETW1450 */ -+ adev->chip_name = "TNETW1450"; -+ break; -+ default: -+ printk("acx: unknown chip ID 0x%08X, " -+ "please report\n", adev->firmware_id); -+ break; -+ } -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_display_hardware_details -+** -+** Displays hw/fw version, radio type etc... -+*/ -+void -+acx_display_hardware_details(acx_device_t *adev) -+{ -+ const char *radio_str, *form_str; -+ -+ FN_ENTER; -+ -+ switch (adev->radio_type) { -+ case RADIO_MAXIM_0D: -+ radio_str = "Maxim"; -+ break; -+ case RADIO_RFMD_11: -+ radio_str = "RFMD"; -+ break; -+ case RADIO_RALINK_15: -+ radio_str = "Ralink"; -+ break; -+ case RADIO_RADIA_16: -+ radio_str = "Radia"; -+ break; -+ case RADIO_UNKNOWN_17: -+ /* TI seems to have a radio which is -+ * additionally 802.11a capable, too */ -+ radio_str = "802.11a/b/g radio?! Please report"; -+ break; -+ case RADIO_UNKNOWN_19: -+ radio_str = "A radio used by Safecom cards?! Please report"; -+ break; -+ case RADIO_UNKNOWN_1B: -+ radio_str = "An unknown radio used by TNETW1450 USB adapters"; -+ break; -+ default: -+ radio_str = "UNKNOWN, please report radio type name!"; -+ break; -+ } -+ -+ switch (adev->form_factor) { -+ case 0x00: -+ form_str = "unspecified"; -+ break; -+ case 0x01: -+ form_str = "(mini-)PCI / CardBus"; -+ break; -+ case 0x02: -+ form_str = "USB"; -+ break; -+ case 0x03: -+ form_str = "Compact Flash"; -+ break; -+ default: -+ form_str = "UNKNOWN, please report"; -+ break; -+ } -+ -+ printk("acx: === chipset %s, radio type 0x%02X (%s), " -+ "form factor 0x%02X (%s), EEPROM version 0x%02X: " -+ "uploaded firmware '%s' ===\n", -+ adev->chip_name, adev->radio_type, radio_str, -+ adev->form_factor, form_str, adev->eeprom_version, -+ adev->firmware_version); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx_e_change_mtu(struct net_device *ndev, int mtu) -+{ -+ enum { -+ MIN_MTU = 256, -+ MAX_MTU = WLAN_DATA_MAXLEN - (ETH_HLEN) -+ }; -+ -+ if (mtu < MIN_MTU || mtu > MAX_MTU) -+ return -EINVAL; -+ -+ ndev->mtu = mtu; -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** acx_e_get_stats, acx_e_get_wireless_stats -+*/ -+struct net_device_stats* -+acx_e_get_stats(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ return &adev->stats; -+} -+ -+struct iw_statistics* -+acx_e_get_wireless_stats(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ return &adev->wstats; -+} -+ -+ -+/*********************************************************************** -+** maps acx111 tx descr rate field to acx100 one -+*/ -+const u8 -+acx_bitpos2rate100[] = { -+ RATE100_1 ,/* 0 */ -+ RATE100_2 ,/* 1 */ -+ RATE100_5 ,/* 2 */ -+ RATE100_2 ,/* 3, should not happen */ -+ RATE100_2 ,/* 4, should not happen */ -+ RATE100_11 ,/* 5 */ -+ RATE100_2 ,/* 6, should not happen */ -+ RATE100_2 ,/* 7, should not happen */ -+ RATE100_22 ,/* 8 */ -+ RATE100_2 ,/* 9, should not happen */ -+ RATE100_2 ,/* 10, should not happen */ -+ RATE100_2 ,/* 11, should not happen */ -+ RATE100_2 ,/* 12, should not happen */ -+ RATE100_2 ,/* 13, should not happen */ -+ RATE100_2 ,/* 14, should not happen */ -+ RATE100_2 ,/* 15, should not happen */ -+}; -+ -+u8 -+acx_rate111to100(u16 r) { -+ return acx_bitpos2rate100[highest_bit(r)]; -+} -+ -+ -+/*********************************************************************** -+** Calculate level like the feb 2003 windows driver seems to do -+*/ -+static u8 -+acx_signal_to_winlevel(u8 rawlevel) -+{ -+ /* u8 winlevel = (u8) (0.5 + 0.625 * rawlevel); */ -+ u8 winlevel = ((4 + (rawlevel * 5)) / 8); -+ -+ if (winlevel > 100) -+ winlevel = 100; -+ return winlevel; -+} -+ -+u8 -+acx_signal_determine_quality(u8 signal, u8 noise) -+{ -+ int qual; -+ -+ qual = (((signal - 30) * 100 / 70) + (100 - noise * 4)) / 2; -+ -+ if (qual > 100) -+ return 100; -+ if (qual < 0) -+ return 0; -+ return qual; -+} -+ -+ -+/*********************************************************************** -+** Interrogate/configure commands -+*/ -+ -+/* FIXME: the lengths given here probably aren't always correct. -+ * They should be gradually replaced by proper "sizeof(acx1XX_ie_XXXX)-4", -+ * unless the firmware actually expects a different length than the struct length */ -+static const u16 -+acx100_ie_len[] = { -+ 0, -+ ACX100_IE_ACX_TIMER_LEN, -+ sizeof(acx100_ie_powersave_t)-4, /* is that 6 or 8??? */ -+ ACX1xx_IE_QUEUE_CONFIG_LEN, -+ ACX100_IE_BLOCK_SIZE_LEN, -+ ACX1xx_IE_MEMORY_CONFIG_OPTIONS_LEN, -+ ACX1xx_IE_RATE_FALLBACK_LEN, -+ ACX100_IE_WEP_OPTIONS_LEN, -+ ACX1xx_IE_MEMORY_MAP_LEN, /* ACX1xx_IE_SSID_LEN, */ -+ 0, -+ ACX1xx_IE_ASSOC_ID_LEN, -+ 0, -+ ACX111_IE_CONFIG_OPTIONS_LEN, -+ ACX1xx_IE_FWREV_LEN, -+ ACX1xx_IE_FCS_ERROR_COUNT_LEN, -+ ACX1xx_IE_MEDIUM_USAGE_LEN, -+ ACX1xx_IE_RXCONFIG_LEN, -+ 0, -+ 0, -+ sizeof(fw_stats_t)-4, -+ 0, -+ ACX1xx_IE_FEATURE_CONFIG_LEN, -+ ACX111_IE_KEY_CHOOSE_LEN, -+ ACX1FF_IE_MISC_CONFIG_TABLE_LEN, -+ ACX1FF_IE_WONE_CONFIG_LEN, -+ 0, -+ ACX1FF_IE_TID_CONFIG_LEN, -+ 0, -+ 0, -+ 0, -+ ACX1FF_IE_CALIB_ASSESSMENT_LEN, -+ ACX1FF_IE_BEACON_FILTER_OPTIONS_LEN, -+ ACX1FF_IE_LOW_RSSI_THRESH_OPT_LEN, -+ ACX1FF_IE_NOISE_HISTOGRAM_RESULTS_LEN, -+ 0, -+ ACX1FF_IE_PACKET_DETECT_THRESH_LEN, -+ ACX1FF_IE_TX_CONFIG_OPTIONS_LEN, -+ ACX1FF_IE_CCA_THRESHOLD_LEN, -+ ACX1FF_IE_EVENT_MASK_LEN, -+ ACX1FF_IE_DTIM_PERIOD_LEN, -+ 0, -+ ACX1FF_IE_ACI_CONFIG_SET_LEN, -+ 0, -+ 0, -+ 0, -+ 0, -+ 0, -+ 0, -+ ACX1FF_IE_EEPROM_VER_LEN, -+}; -+ -+static const u16 -+acx100_ie_len_dot11[] = { -+ 0, -+ ACX1xx_IE_DOT11_STATION_ID_LEN, -+ 0, -+ ACX100_IE_DOT11_BEACON_PERIOD_LEN, -+ ACX1xx_IE_DOT11_DTIM_PERIOD_LEN, -+ ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN, -+ ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN, -+ ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE_LEN, -+ ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN, -+ 0, -+ ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN_LEN, -+ ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN, -+ 0, -+ ACX1xx_IE_DOT11_TX_POWER_LEVEL_LEN, -+ ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN, -+ ACX100_IE_DOT11_ED_THRESHOLD_LEN, -+ ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET_LEN, -+ 0, -+ 0, -+ 0, -+}; -+ -+static const u16 -+acx111_ie_len[] = { -+ 0, -+ ACX100_IE_ACX_TIMER_LEN, -+ sizeof(acx111_ie_powersave_t)-4, -+ ACX1xx_IE_QUEUE_CONFIG_LEN, -+ ACX100_IE_BLOCK_SIZE_LEN, -+ ACX1xx_IE_MEMORY_CONFIG_OPTIONS_LEN, -+ ACX1xx_IE_RATE_FALLBACK_LEN, -+ ACX100_IE_WEP_OPTIONS_LEN, -+ ACX1xx_IE_MEMORY_MAP_LEN, /* ACX1xx_IE_SSID_LEN, */ -+ 0, -+ ACX1xx_IE_ASSOC_ID_LEN, -+ 0, -+ ACX111_IE_CONFIG_OPTIONS_LEN, -+ ACX1xx_IE_FWREV_LEN, -+ ACX1xx_IE_FCS_ERROR_COUNT_LEN, -+ ACX1xx_IE_MEDIUM_USAGE_LEN, -+ ACX1xx_IE_RXCONFIG_LEN, -+ 0, -+ 0, -+ sizeof(fw_stats_t)-4, -+ 0, -+ ACX1xx_IE_FEATURE_CONFIG_LEN, -+ ACX111_IE_KEY_CHOOSE_LEN, -+ ACX1FF_IE_MISC_CONFIG_TABLE_LEN, -+ ACX1FF_IE_WONE_CONFIG_LEN, -+ 0, -+ ACX1FF_IE_TID_CONFIG_LEN, -+ 0, -+ 0, -+ 0, -+ ACX1FF_IE_CALIB_ASSESSMENT_LEN, -+ ACX1FF_IE_BEACON_FILTER_OPTIONS_LEN, -+ ACX1FF_IE_LOW_RSSI_THRESH_OPT_LEN, -+ ACX1FF_IE_NOISE_HISTOGRAM_RESULTS_LEN, -+ 0, -+ ACX1FF_IE_PACKET_DETECT_THRESH_LEN, -+ ACX1FF_IE_TX_CONFIG_OPTIONS_LEN, -+ ACX1FF_IE_CCA_THRESHOLD_LEN, -+ ACX1FF_IE_EVENT_MASK_LEN, -+ ACX1FF_IE_DTIM_PERIOD_LEN, -+ 0, -+ ACX1FF_IE_ACI_CONFIG_SET_LEN, -+ 0, -+ 0, -+ 0, -+ 0, -+ 0, -+ 0, -+ ACX1FF_IE_EEPROM_VER_LEN, -+}; -+ -+static const u16 -+acx111_ie_len_dot11[] = { -+ 0, -+ ACX1xx_IE_DOT11_STATION_ID_LEN, -+ 0, -+ ACX100_IE_DOT11_BEACON_PERIOD_LEN, -+ ACX1xx_IE_DOT11_DTIM_PERIOD_LEN, -+ ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN, -+ ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN, -+ ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE_LEN, -+ ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN, -+ 0, -+ ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN_LEN, -+ ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN, -+ 0, -+ ACX1xx_IE_DOT11_TX_POWER_LEVEL_LEN, -+ ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN, -+ ACX100_IE_DOT11_ED_THRESHOLD_LEN, -+ ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET_LEN, -+ 0, -+ 0, -+ 0, -+}; -+ -+ -+#undef FUNC -+#define FUNC "configure" -+#if !ACX_DEBUG -+int -+acx_s_configure(acx_device_t *adev, void *pdr, int type) -+{ -+#else -+int -+acx_s_configure_debug(acx_device_t *adev, void *pdr, int type, const char* typestr) -+{ -+#endif -+ u16 len; -+ int res; -+ -+ if (type < 0x1000) -+ len = adev->ie_len[type]; -+ else -+ len = adev->ie_len_dot11[type - 0x1000]; -+ -+ log(L_CTL, FUNC"(type:%s,len:%u)\n", typestr, len); -+ if (unlikely(!len)) { -+ log(L_DEBUG, "zero-length type %s?!\n", typestr); -+ } -+ -+ ((acx_ie_generic_t *)pdr)->type = cpu_to_le16(type); -+ ((acx_ie_generic_t *)pdr)->len = cpu_to_le16(len); -+ res = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIGURE, pdr, len + 4); -+ if (unlikely(OK != res)) { -+#if ACX_DEBUG -+ printk("%s: "FUNC"(type:%s) FAILED\n", adev->ndev->name, typestr); -+#else -+ printk("%s: "FUNC"(type:0x%X) FAILED\n", adev->ndev->name, type); -+#endif -+ /* dump_stack() is already done in issue_cmd() */ -+ } -+ return res; -+} -+ -+#undef FUNC -+#define FUNC "interrogate" -+#if !ACX_DEBUG -+int -+acx_s_interrogate(acx_device_t *adev, void *pdr, int type) -+{ -+#else -+int -+acx_s_interrogate_debug(acx_device_t *adev, void *pdr, int type, -+ const char* typestr) -+{ -+#endif -+ u16 len; -+ int res; -+ -+ /* FIXME: no check whether this exceeds the array yet. -+ * We should probably remember the number of entries... */ -+ if (type < 0x1000) -+ len = adev->ie_len[type]; -+ else -+ len = adev->ie_len_dot11[type-0x1000]; -+ -+ log(L_CTL, FUNC"(type:%s,len:%u)\n", typestr, len); -+ -+ ((acx_ie_generic_t *)pdr)->type = cpu_to_le16(type); -+ ((acx_ie_generic_t *)pdr)->len = cpu_to_le16(len); -+ res = acx_s_issue_cmd(adev, ACX1xx_CMD_INTERROGATE, pdr, len + 4); -+ if (unlikely(OK != res)) { -+#if ACX_DEBUG -+ printk("%s: "FUNC"(type:%s) FAILED\n", adev->ndev->name, typestr); -+#else -+ printk("%s: "FUNC"(type:0x%X) FAILED\n", adev->ndev->name, type); -+#endif -+ /* dump_stack() is already done in issue_cmd() */ -+ } -+ return res; -+} -+ -+#if CMD_DISCOVERY -+void -+great_inquisitor(acx_device_t *adev) -+{ -+ static struct { -+ u16 type; -+ u16 len; -+ /* 0x200 was too large here: */ -+ u8 data[0x100 - 4]; -+ } ACX_PACKED ie; -+ u16 type; -+ -+ FN_ENTER; -+ -+ /* 0..0x20, 0x1000..0x1020 */ -+ for (type = 0; type <= 0x1020; type++) { -+ if (type == 0x21) -+ type = 0x1000; -+ ie.type = cpu_to_le16(type); -+ ie.len = cpu_to_le16(sizeof(ie) - 4); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_INTERROGATE, &ie, sizeof(ie)); -+ } -+ FN_EXIT0; -+} -+#endif -+ -+ -+#ifdef CONFIG_PROC_FS -+/*********************************************************************** -+** /proc files -+*/ -+/*********************************************************************** -+** acx_l_proc_output -+** Generate content for our /proc entry -+** -+** Arguments: -+** buf is a pointer to write output to -+** adev is the usual pointer to our private struct acx_device -+** Returns: -+** number of bytes actually written to buf -+** Side effects: -+** none -+*/ -+static int -+acx_l_proc_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ int i; -+ -+ FN_ENTER; -+ -+ p += sprintf(p, -+ "acx driver version:\t\t" ACX_RELEASE "\n" -+ "Wireless extension version:\t" STRING(WIRELESS_EXT) "\n" -+ "chip name:\t\t\t%s (0x%08X)\n" -+ "radio type:\t\t\t0x%02X\n" -+ "form factor:\t\t\t0x%02X\n" -+ "EEPROM version:\t\t\t0x%02X\n" -+ "firmware version:\t\t%s (0x%08X)\n", -+ adev->chip_name, adev->firmware_id, -+ adev->radio_type, -+ adev->form_factor, -+ adev->eeprom_version, -+ adev->firmware_version, adev->firmware_numver); -+ -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ struct client *bss = &adev->sta_list[i]; -+ if (!bss->used) continue; -+ p += sprintf(p, "BSS %u BSSID "MACSTR" ESSID %s channel %u " -+ "Cap 0x%X SIR %u SNR %u\n", -+ i, MAC(bss->bssid), (char*)bss->essid, bss->channel, -+ bss->cap_info, bss->sir, bss->snr); -+ } -+ p += sprintf(p, "status:\t\t\t%u (%s)\n", -+ adev->status, acx_get_status_name(adev->status)); -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_s_proc_diag_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ unsigned long flags; -+ unsigned int len = 0, partlen; -+ u32 temp1, temp2; -+ u8 *st, *st_end; -+#ifdef __BIG_ENDIAN -+ u8 *st2; -+#endif -+ fw_stats_t *fw_stats; -+ char *part_str = NULL; -+ fw_stats_tx_t *tx = NULL; -+ fw_stats_rx_t *rx = NULL; -+ fw_stats_dma_t *dma = NULL; -+ fw_stats_irq_t *irq = NULL; -+ fw_stats_wep_t *wep = NULL; -+ fw_stats_pwr_t *pwr = NULL; -+ fw_stats_mic_t *mic = NULL; -+ fw_stats_aes_t *aes = NULL; -+ fw_stats_event_t *evt = NULL; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+#if defined (ACX_MEM) -+ p = acxmem_s_proc_diag_output(p, adev); -+#else -+ if (IS_PCI(adev)) -+ p = acxpci_s_proc_diag_output(p, adev); -+#endif -+ -+ p += sprintf(p, -+ "\n" -+ "** network status **\n" -+ "dev_state_mask 0x%04X\n" -+ "status %u (%s), " -+ "mode %u, channel %u, " -+ "reg_dom_id 0x%02X, reg_dom_chanmask 0x%04X, ", -+ adev->dev_state_mask, -+ adev->status, acx_get_status_name(adev->status), -+ adev->mode, adev->channel, -+ adev->reg_dom_id, adev->reg_dom_chanmask -+ ); -+ p += sprintf(p, -+ "ESSID \"%s\", essid_active %d, essid_len %d, " -+ "essid_for_assoc \"%s\", nick \"%s\"\n" -+ "WEP ena %d, restricted %d, idx %d\n", -+ adev->essid, adev->essid_active, (int)adev->essid_len, -+ adev->essid_for_assoc, adev->nick, -+ adev->wep_enabled, adev->wep_restricted, -+ adev->wep_current_index); -+ p += sprintf(p, "dev_addr "MACSTR"\n", MAC(adev->dev_addr)); -+ p += sprintf(p, "bssid "MACSTR"\n", MAC(adev->bssid)); -+ p += sprintf(p, "ap_filter "MACSTR"\n", MAC(adev->ap)); -+ -+ p += sprintf(p, -+ "\n" -+ "** PHY status **\n" -+ "tx_disabled %d, tx_level_dbm %d\n" /* "tx_level_val %d, tx_level_auto %d\n" */ -+ "sensitivity %d, antenna 0x%02X, ed_threshold %d, cca %d, preamble_mode %d\n" -+ "rate_basic 0x%04X, rate_oper 0x%04X\n" -+ "rts_threshold %d, frag_threshold %d, short_retry %d, long_retry %d\n" -+ "msdu_lifetime %d, listen_interval %d, beacon_interval %d\n", -+ adev->tx_disabled, adev->tx_level_dbm, /* adev->tx_level_val, adev->tx_level_auto, */ -+ adev->sensitivity, adev->antenna, adev->ed_threshold, adev->cca, adev->preamble_mode, -+ adev->rate_basic, adev->rate_oper, -+ adev->rts_threshold, adev->frag_threshold, adev->short_retry, adev->long_retry, -+ adev->msdu_lifetime, adev->listen_interval, adev->beacon_interval); -+ -+ acx_unlock(adev, flags); -+ -+ p += sprintf(p, -+ "\n" -+ "** Firmware **\n" -+ "NOTE: version dependent statistics layout, " -+ "please report if you suspect wrong parsing!\n" -+ "\n" -+ "version \"%s\"\n", adev->firmware_version); -+ -+ /* TODO: may replace kmalloc/memset with kzalloc once -+ * Linux 2.6.14 is widespread */ -+ fw_stats = kmalloc(sizeof(*fw_stats), GFP_KERNEL); -+ if (!fw_stats) { -+ FN_EXIT1(0); -+ return 0; -+ } -+ memset(fw_stats, 0, sizeof(*fw_stats)); -+ -+ st = (u8 *)fw_stats; -+ -+ part_str = "statistics query command"; -+ -+ if (OK != acx_s_interrogate(adev, st, ACX1xx_IE_FIRMWARE_STATISTICS)) -+ goto fw_stats_end; -+ -+ st += sizeof(u16); -+ len = *(u16 *)st; -+ -+ if (len > sizeof(*fw_stats)) { -+ p += sprintf(p, -+ "firmware version with bigger fw_stats struct detected\n" -+ "(%u vs. %u), please report\n", len, sizeof(fw_stats_t)); -+ if (len > sizeof(*fw_stats)) { -+ p += sprintf(p, "struct size exceeded allocation!\n"); -+ len = sizeof(*fw_stats); -+ } -+ } -+ st += sizeof(u16); -+ st_end = st - 2*sizeof(u16) + len; -+ -+#ifdef __BIG_ENDIAN -+ /* let's make one bold assumption here: -+ * (hopefully!) *all* statistics fields are u32 only, -+ * thus if we need to make endianness corrections -+ * we can simply do them in one go, in advance */ -+ st2 = (u8 *)fw_stats; -+ for (temp1 = 0; temp1 < len; temp1 += 4, st2 += 4) -+ *(u32 *)st2 = le32_to_cpu(*(u32 *)st2); -+#endif -+ -+ part_str = "Rx/Tx"; -+ -+ /* directly at end of a struct part? --> no error! */ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ tx = (fw_stats_tx_t *)st; -+ st += sizeof(fw_stats_tx_t); -+ rx = (fw_stats_rx_t *)st; -+ st += sizeof(fw_stats_rx_t); -+ partlen = sizeof(fw_stats_tx_t) + sizeof(fw_stats_rx_t); -+ -+ if (IS_ACX100(adev)) { -+ /* at least ACX100 PCI F/W 1.9.8.b -+ * and ACX100 USB F/W 1.0.7-USB -+ * don't have those two fields... */ -+ st -= 2*sizeof(u32); -+ -+ /* our parsing doesn't quite match this firmware yet, -+ * log failure */ -+ if (st > st_end) -+ goto fw_stats_fail; -+ temp1 = temp2 = 999999999; -+ } else { -+ if (st > st_end) -+ goto fw_stats_fail; -+ temp1 = rx->rx_aci_events; -+ temp2 = rx->rx_aci_resets; -+ } -+ -+ p += sprintf(p, -+ "%s:\n" -+ " tx_desc_overfl %u\n" -+ " rx_OutOfMem %u, rx_hdr_overfl %u, rx_hw_stuck %u\n" -+ " rx_dropped_frame %u, rx_frame_ptr_err %u, rx_xfr_hint_trig %u\n" -+ " rx_aci_events %u, rx_aci_resets %u\n", -+ part_str, -+ tx->tx_desc_of, -+ rx->rx_oom, -+ rx->rx_hdr_of, -+ rx->rx_hw_stuck, -+ rx->rx_dropped_frame, -+ rx->rx_frame_ptr_err, -+ rx->rx_xfr_hint_trig, -+ temp1, -+ temp2); -+ -+ part_str = "DMA"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ dma = (fw_stats_dma_t *)st; -+ partlen = sizeof(fw_stats_dma_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " rx_dma_req %u, rx_dma_err %u, tx_dma_req %u, tx_dma_err %u\n", -+ part_str, -+ dma->rx_dma_req, -+ dma->rx_dma_err, -+ dma->tx_dma_req, -+ dma->tx_dma_err); -+ -+ part_str = "IRQ"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ irq = (fw_stats_irq_t *)st; -+ partlen = sizeof(fw_stats_irq_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " cmd_cplt %u, fiq %u\n" -+ " rx_hdrs %u, rx_cmplt %u, rx_mem_overfl %u, rx_rdys %u\n" -+ " irqs %u, tx_procs %u, decrypt_done %u\n" -+ " dma_0_done %u, dma_1_done %u, tx_exch_complet %u\n" -+ " commands %u, rx_procs %u, hw_pm_mode_changes %u\n" -+ " host_acks %u, pci_pm %u, acm_wakeups %u\n", -+ part_str, -+ irq->cmd_cplt, -+ irq->fiq, -+ irq->rx_hdrs, -+ irq->rx_cmplt, -+ irq->rx_mem_of, -+ irq->rx_rdys, -+ irq->irqs, -+ irq->tx_procs, -+ irq->decrypt_done, -+ irq->dma_0_done, -+ irq->dma_1_done, -+ irq->tx_exch_complet, -+ irq->commands, -+ irq->rx_procs, -+ irq->hw_pm_mode_changes, -+ irq->host_acks, -+ irq->pci_pm, -+ irq->acm_wakeups); -+ -+ part_str = "WEP"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ wep = (fw_stats_wep_t *)st; -+ partlen = sizeof(fw_stats_wep_t); -+ st += partlen; -+ -+ if ( -+ (IS_PCI(adev) && IS_ACX100(adev)) -+ || (IS_USB(adev) && IS_ACX100(adev)) -+ || (IS_MEM(adev) && IS_ACX100(adev)) -+ ) { -+ /* at least ACX100 PCI F/W 1.9.8.b, -+ * ACX100 USB F/W 1.0.7-USB -+ * and ACX100 Generic Slave F/W 1.10.7.K -+ * don't have those two fields... -+ */ -+ st -= 2*sizeof(u32); -+ if (st > st_end) -+ goto fw_stats_fail; -+ temp1 = temp2 = 999999999; -+ } else { -+ if (st > st_end) -+ goto fw_stats_fail; -+ temp1 = wep->wep_pkt_decrypt; -+ temp2 = wep->wep_decrypt_irqs; -+ } -+ -+ p += sprintf(p, -+ "%s:\n" -+ " wep_key_count %u, wep_default_key_count %u, dot11_def_key_mib %u\n" -+ " wep_key_not_found %u, wep_decrypt_fail %u\n" -+ " wep_pkt_decrypt %u, wep_decrypt_irqs %u\n", -+ part_str, -+ wep->wep_key_count, -+ wep->wep_default_key_count, -+ wep->dot11_def_key_mib, -+ wep->wep_key_not_found, -+ wep->wep_decrypt_fail, -+ temp1, -+ temp2); -+ -+ part_str = "power"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ pwr = (fw_stats_pwr_t *)st; -+ partlen = sizeof(fw_stats_pwr_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " tx_start_ctr %u, no_ps_tx_too_short %u\n" -+ " rx_start_ctr %u, no_ps_rx_too_short %u\n" -+ " lppd_started %u\n" -+ " no_lppd_too_noisy %u, no_lppd_too_short %u, no_lppd_matching_frame %u\n", -+ part_str, -+ pwr->tx_start_ctr, -+ pwr->no_ps_tx_too_short, -+ pwr->rx_start_ctr, -+ pwr->no_ps_rx_too_short, -+ pwr->lppd_started, -+ pwr->no_lppd_too_noisy, -+ pwr->no_lppd_too_short, -+ pwr->no_lppd_matching_frame); -+ -+ part_str = "MIC"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ mic = (fw_stats_mic_t *)st; -+ partlen = sizeof(fw_stats_mic_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " mic_rx_pkts %u, mic_calc_fail %u\n", -+ part_str, -+ mic->mic_rx_pkts, -+ mic->mic_calc_fail); -+ -+ part_str = "AES"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ aes = (fw_stats_aes_t *)st; -+ partlen = sizeof(fw_stats_aes_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " aes_enc_fail %u, aes_dec_fail %u\n" -+ " aes_enc_pkts %u, aes_dec_pkts %u\n" -+ " aes_enc_irq %u, aes_dec_irq %u\n", -+ part_str, -+ aes->aes_enc_fail, -+ aes->aes_dec_fail, -+ aes->aes_enc_pkts, -+ aes->aes_dec_pkts, -+ aes->aes_enc_irq, -+ aes->aes_dec_irq); -+ -+ part_str = "event"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ evt = (fw_stats_event_t *)st; -+ partlen = sizeof(fw_stats_event_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " heartbeat %u, calibration %u\n" -+ " rx_mismatch %u, rx_mem_empty %u, rx_pool %u\n" -+ " oom_late %u\n" -+ " phy_tx_err %u, tx_stuck %u\n", -+ part_str, -+ evt->heartbeat, -+ evt->calibration, -+ evt->rx_mismatch, -+ evt->rx_mem_empty, -+ evt->rx_pool, -+ evt->oom_late, -+ evt->phy_tx_err, -+ evt->tx_stuck); -+ -+ if (st < st_end) -+ goto fw_stats_bigger; -+ -+ goto fw_stats_end; -+ -+fw_stats_fail: -+ st -= partlen; -+ p += sprintf(p, -+ "failed at %s part (size %u), offset %u (struct size %u), " -+ "please report\n", part_str, partlen, -+ (int)st - (int)fw_stats, len); -+ -+fw_stats_bigger: -+ for (; st < st_end; st += 4) -+ p += sprintf(p, -+ "UNKN%3d: %u\n", (int)st - (int)fw_stats, *(u32 *)st); -+ -+fw_stats_end: -+ kfree(fw_stats); -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_s_proc_phy_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ int i; -+ -+ FN_ENTER; -+ -+ /* -+ if (RADIO_RFMD_11 != adev->radio_type) { -+ printk("sorry, not yet adapted for radio types " -+ "other than RFMD, please verify " -+ "PHY size etc. first!\n"); -+ goto end; -+ } -+ */ -+ -+ /* The PHY area is only 0x80 bytes long; further pages after that -+ * only have some page number registers with altered value, -+ * all other registers remain the same. */ -+ for (i = 0; i < 0x80; i++) { -+ acx_s_read_phy_reg(adev, i, p++); -+ } -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+** acx_e_read_proc_XXXX -+** Handle our /proc entry -+** -+** Arguments: -+** standard kernel read_proc interface -+** Returns: -+** number of bytes written to buf -+** Side effects: -+** none -+*/ -+static int -+acx_e_read_proc(char *buf, char **start, off_t offset, int count, -+ int *eof, void *data) -+{ -+ acx_device_t *adev = (acx_device_t*)data; -+ unsigned long flags; -+ int length; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ acx_lock(adev, flags); -+ /* fill buf */ -+ length = acx_l_proc_output(buf, adev); -+ acx_unlock(adev, flags); -+ acx_sem_unlock(adev); -+ -+ /* housekeeping */ -+ if (length <= offset + count) -+ *eof = 1; -+ *start = buf + offset; -+ length -= offset; -+ if (length > count) -+ length = count; -+ if (length < 0) -+ length = 0; -+ FN_EXIT1(length); -+ return length; -+} -+ -+static char _buf[32768]; -+static int -+acx_e_read_proc_diag(char *buf, char **start, off_t offset, int count, -+ int *eof, void *data) -+{ -+ acx_device_t *adev = (acx_device_t*)data; -+ int length; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ /* fill buf */ -+ length = acx_s_proc_diag_output(_buf, adev); -+ acx_sem_unlock(adev); -+ -+ memcpy(buf, _buf + offset, count); -+ -+ /* housekeeping */ -+ if (length <= offset + count) -+ *eof = 1; -+ *start = count; -+ length -= offset; -+ if (length > count) -+ length = count; -+ if (length < 0) -+ length = 0; -+ FN_EXIT1(length); -+ return length; -+} -+ -+static int -+acx_e_read_proc_eeprom(char *buf, char **start, off_t offset, int count, -+ int *eof, void *data) -+{ -+ acx_device_t *adev = (acx_device_t*)data; -+ int length; -+ -+ FN_ENTER; -+ -+ /* fill buf */ -+ length = 0; -+#if defined (ACX_MEM) -+ acx_sem_lock(adev); -+ length = acxmem_proc_eeprom_output(buf, adev); -+ acx_sem_unlock(adev); -+#else -+ if (IS_PCI(adev)) { -+ acx_sem_lock(adev); -+ length = acxpci_proc_eeprom_output(buf, adev); -+ acx_sem_unlock(adev); -+ } -+#endif -+ -+ /* housekeeping */ -+ if (length <= offset + count) -+ *eof = 1; -+ *start = buf + offset; -+ length -= offset; -+ if (length > count) -+ length = count; -+ if (length < 0) -+ length = 0; -+ FN_EXIT1(length); -+ return length; -+} -+ -+static int -+acx_e_read_proc_phy(char *buf, char **start, off_t offset, int count, -+ int *eof, void *data) -+{ -+ acx_device_t *adev = (acx_device_t*)data; -+ int length; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ /* fill buf */ -+ length = acx_s_proc_phy_output(buf, adev); -+ acx_sem_unlock(adev); -+ -+ /* housekeeping */ -+ if (length <= offset + count) -+ *eof = 1; -+ *start = buf + offset; -+ length -= offset; -+ if (length > count) -+ length = count; -+ if (length < 0) -+ length = 0; -+ FN_EXIT1(length); -+ return length; -+} -+ -+ -+/*********************************************************************** -+** /proc files registration -+*/ -+static const char * const -+proc_files[] = { "", "_diag", "_eeprom", "_phy" }; -+ -+static read_proc_t * const -+proc_funcs[] = { -+ acx_e_read_proc, -+ acx_e_read_proc_diag, -+ acx_e_read_proc_eeprom, -+ acx_e_read_proc_phy -+}; -+ -+static int -+manage_proc_entries(const struct net_device *ndev, int remove) -+{ -+ acx_device_t *adev = ndev2adev((struct net_device *)ndev); -+ char procbuf[80]; -+ int i; -+ -+ for (i = 0; i < VEC_SIZE(proc_files); i++) { -+ snprintf(procbuf, sizeof(procbuf), -+ "driver/acx_%s%s", ndev->name, proc_files[i]); -+ log(L_INIT, "%sing /proc entry %s\n", -+ remove ? "remov" : "creat", procbuf); -+ if (!remove) { -+ if (!create_proc_read_entry(procbuf, 0, 0, proc_funcs[i], adev)) { -+ printk("acx: cannot register /proc entry %s\n", procbuf); -+ return NOT_OK; -+ } -+ } else { -+ remove_proc_entry(procbuf, NULL); -+ } -+ } -+ return OK; -+} -+ -+int -+acx_proc_register_entries(const struct net_device *ndev) -+{ -+ return manage_proc_entries(ndev, 0); -+} -+ -+int -+acx_proc_unregister_entries(const struct net_device *ndev) -+{ -+ return manage_proc_entries(ndev, 1); -+} -+#endif /* CONFIG_PROC_FS */ -+ -+ -+/*********************************************************************** -+** acx_cmd_join_bssid -+** -+** Common code for both acx100 and acx111. -+*/ -+/* NB: does NOT match RATE100_nn but matches ACX[111]_SCAN_RATE_n */ -+static const u8 -+bitpos2genframe_txrate[] = { -+ 10, /* 0. 1 Mbit/s */ -+ 20, /* 1. 2 Mbit/s */ -+ 55, /* 2. 5.5 Mbit/s */ -+ 0x0B, /* 3. 6 Mbit/s */ -+ 0x0F, /* 4. 9 Mbit/s */ -+ 110, /* 5. 11 Mbit/s */ -+ 0x0A, /* 6. 12 Mbit/s */ -+ 0x0E, /* 7. 18 Mbit/s */ -+ 220, /* 8. 22 Mbit/s */ -+ 0x09, /* 9. 24 Mbit/s */ -+ 0x0D, /* 10. 36 Mbit/s */ -+ 0x08, /* 11. 48 Mbit/s */ -+ 0x0C, /* 12. 54 Mbit/s */ -+ 10, /* 13. 1 Mbit/s, should never happen */ -+ 10, /* 14. 1 Mbit/s, should never happen */ -+ 10, /* 15. 1 Mbit/s, should never happen */ -+}; -+ -+/* Looks scary, eh? -+** Actually, each one compiled into one AND and one SHIFT, -+** 31 bytes in x86 asm (more if uints are replaced by u16/u8) */ -+static inline unsigned int -+rate111to5bits(unsigned int rate) -+{ -+ return (rate & 0x7) -+ | ( (rate & RATE111_11) / (RATE111_11/JOINBSS_RATES_11) ) -+ | ( (rate & RATE111_22) / (RATE111_22/JOINBSS_RATES_22) ) -+ ; -+} -+ -+static void -+acx_s_cmd_join_bssid(acx_device_t *adev, const u8 *bssid) -+{ -+ acx_joinbss_t tmp; -+ int dtim_interval; -+ int i; -+ -+ if (mac_is_zero(bssid)) -+ return; -+ -+ FN_ENTER; -+ -+ dtim_interval = (ACX_MODE_0_ADHOC == adev->mode) ? -+ 1 : adev->dtim_interval; -+ -+ memset(&tmp, 0, sizeof(tmp)); -+ -+ for (i = 0; i < ETH_ALEN; i++) { -+ tmp.bssid[i] = bssid[ETH_ALEN-1 - i]; -+ } -+ -+ tmp.beacon_interval = cpu_to_le16(adev->beacon_interval); -+ -+ /* Basic rate set. Control frame responses (such as ACK or CTS frames) -+ ** are sent with one of these rates */ -+ if (IS_ACX111(adev)) { -+ /* It was experimentally determined that rates_basic -+ ** can take 11g rates as well, not only rates -+ ** defined with JOINBSS_RATES_BASIC111_nnn. -+ ** Just use RATE111_nnn constants... */ -+ tmp.u.acx111.dtim_interval = dtim_interval; -+ tmp.u.acx111.rates_basic = cpu_to_le16(adev->rate_basic); -+ log(L_ASSOC, "rates_basic:%04X, rates_supported:%04X\n", -+ adev->rate_basic, adev->rate_oper); -+ } else { -+ tmp.u.acx100.dtim_interval = dtim_interval; -+ tmp.u.acx100.rates_basic = rate111to5bits(adev->rate_basic); -+ tmp.u.acx100.rates_supported = rate111to5bits(adev->rate_oper); -+ log(L_ASSOC, "rates_basic:%04X->%02X, " -+ "rates_supported:%04X->%02X\n", -+ adev->rate_basic, tmp.u.acx100.rates_basic, -+ adev->rate_oper, tmp.u.acx100.rates_supported); -+ } -+ -+ /* Setting up how Beacon, Probe Response, RTS, and PS-Poll frames -+ ** will be sent (rate/modulation/preamble) */ -+ tmp.u.txrate.genfrm_txrate = bitpos2genframe_txrate[lowest_bit(adev->rate_basic)]; -+ tmp.genfrm_mod_pre = 0; /* FIXME: was = adev->capab_short (which was always 0); */ -+ /* we can use short pre *if* all peers can understand it */ -+ /* FIXME #2: we need to correctly set PBCC/OFDM bits here too */ -+ -+ /* we switch fw to STA mode in MONITOR mode, it seems to be -+ ** the only mode where fw does not emit beacons by itself -+ ** but allows us to send anything (we really want to retain -+ ** ability to tx arbitrary frames in MONITOR mode) -+ */ -+ tmp.macmode = (adev->mode != ACX_MODE_MONITOR ? adev->mode : ACX_MODE_2_STA); -+ tmp.channel = adev->channel; -+ tmp.essid_len = adev->essid_len; -+ /* NOTE: the code memcpy'd essid_len + 1 before, which is WRONG! */ -+ memcpy(tmp.essid, adev->essid, tmp.essid_len); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_JOIN, &tmp, tmp.essid_len + 0x11); -+ -+ log(L_ASSOC|L_DEBUG, "BSS_Type = %u\n", tmp.macmode); -+ acxlog_mac(L_ASSOC|L_DEBUG, "JoinBSSID MAC:", adev->bssid, "\n"); -+ -+ acx_update_capabilities(adev); -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_s_cmd_start_scan -+** -+** Issue scan command to the hardware -+** -+** unified function for both ACX111 and ACX100 -+*/ -+static void -+acx_s_scan_chan(acx_device_t *adev) -+{ -+ union { -+ acx111_scan_t acx111; -+ acx100_scan_t acx100; -+ } s; -+ -+ FN_ENTER; -+ -+ memset(&s, 0, sizeof(s)); -+ -+ /* first common positions... */ -+ -+ s.acx111.count = cpu_to_le16(adev->scan_count); -+ s.acx111.rate = adev->scan_rate; -+ s.acx111.options = adev->scan_mode; -+ s.acx111.chan_duration = cpu_to_le16(adev->scan_duration); -+ s.acx111.max_probe_delay = cpu_to_le16(adev->scan_probe_delay); -+ -+ /* ...then differences */ -+ -+ if (IS_ACX111(adev)) { -+ s.acx111.channel_list_select = 0; /* scan every allowed channel */ -+ /*s.acx111.channel_list_select = 1;*/ /* scan given channels */ -+ /*s.acx111.modulation = 0x40;*/ /* long preamble? OFDM? -> only for active scan */ -+ s.acx111.modulation = 0; -+ /*s.acx111.channel_list[0] = 6; -+ s.acx111.channel_list[1] = 4;*/ -+ } else { -+ s.acx100.start_chan = cpu_to_le16(1); -+ s.acx100.flags = cpu_to_le16(0x8000); -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_SCAN, &s, sizeof(s)); -+ FN_EXIT0; -+} -+ -+ -+void -+acx_s_cmd_start_scan(acx_device_t *adev) -+{ -+ /* time_before check is 'just in case' thing */ -+ if (!(adev->irq_status & HOST_INT_SCAN_COMPLETE) -+ && time_before(jiffies, adev->scan_start + 10*HZ) -+ ) { -+ log(L_INIT, "start_scan: seems like previous scan " -+ "is still running. Not starting anew. Please report\n"); -+ return; -+ } -+ -+ log(L_INIT, "starting radio scan\n"); -+ /* remember that fw is commanded to do scan */ -+ adev->scan_start = jiffies; -+ CLEAR_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); -+ /* issue it */ -+ acx_s_scan_chan(adev); -+} -+ -+ -+/*********************************************************************** -+** acx111 feature config -+*/ -+static int -+acx111_s_get_feature_config(acx_device_t *adev, -+ u32 *feature_options, u32 *data_flow_options) -+{ -+ struct acx111_ie_feature_config feat; -+ -+ if (!IS_ACX111(adev)) { -+ return NOT_OK; -+ } -+ -+ memset(&feat, 0, sizeof(feat)); -+ -+ if (OK != acx_s_interrogate(adev, &feat, ACX1xx_IE_FEATURE_CONFIG)) { -+ return NOT_OK; -+ } -+ log(L_DEBUG, -+ "got Feature option:0x%X, DataFlow option: 0x%X\n", -+ feat.feature_options, -+ feat.data_flow_options); -+ -+ if (feature_options) -+ *feature_options = le32_to_cpu(feat.feature_options); -+ if (data_flow_options) -+ *data_flow_options = le32_to_cpu(feat.data_flow_options); -+ -+ return OK; -+} -+ -+static int -+acx111_s_set_feature_config(acx_device_t *adev, -+ u32 feature_options, u32 data_flow_options, -+ unsigned int mode /* 0 == remove, 1 == add, 2 == set */) -+{ -+ struct acx111_ie_feature_config feat; -+ -+ if (!IS_ACX111(adev)) { -+ return NOT_OK; -+ } -+ -+ if ((mode < 0) || (mode > 2)) -+ return NOT_OK; -+ -+ if (mode != 2) -+ /* need to modify old data */ -+ acx111_s_get_feature_config(adev, &feat.feature_options, &feat.data_flow_options); -+ else { -+ /* need to set a completely new value */ -+ feat.feature_options = 0; -+ feat.data_flow_options = 0; -+ } -+ -+ if (mode == 0) { /* remove */ -+ CLEAR_BIT(feat.feature_options, cpu_to_le32(feature_options)); -+ CLEAR_BIT(feat.data_flow_options, cpu_to_le32(data_flow_options)); -+ } else { /* add or set */ -+ SET_BIT(feat.feature_options, cpu_to_le32(feature_options)); -+ SET_BIT(feat.data_flow_options, cpu_to_le32(data_flow_options)); -+ } -+ -+ log(L_DEBUG, -+ "old: feature 0x%08X dataflow 0x%08X. mode: %u\n" -+ "new: feature 0x%08X dataflow 0x%08X\n", -+ feature_options, data_flow_options, mode, -+ le32_to_cpu(feat.feature_options), -+ le32_to_cpu(feat.data_flow_options)); -+ -+ if (OK != acx_s_configure(adev, &feat, ACX1xx_IE_FEATURE_CONFIG)) { -+ return NOT_OK; -+ } -+ -+ return OK; -+} -+ -+static inline int -+acx111_s_feature_off(acx_device_t *adev, u32 f, u32 d) -+{ -+ return acx111_s_set_feature_config(adev, f, d, 0); -+} -+static inline int -+acx111_s_feature_on(acx_device_t *adev, u32 f, u32 d) -+{ -+ return acx111_s_set_feature_config(adev, f, d, 1); -+} -+static inline int -+acx111_s_feature_set(acx_device_t *adev, u32 f, u32 d) -+{ -+ return acx111_s_set_feature_config(adev, f, d, 2); -+} -+ -+ -+/*********************************************************************** -+** acx100_s_init_memory_pools -+*/ -+static int -+acx100_s_init_memory_pools(acx_device_t *adev, const acx_ie_memmap_t *mmt) -+{ -+ acx100_ie_memblocksize_t MemoryBlockSize; -+ acx100_ie_memconfigoption_t MemoryConfigOption; -+ int TotalMemoryBlocks; -+ int RxBlockNum; -+ int TotalRxBlockSize; -+ int TxBlockNum; -+ int TotalTxBlockSize; -+ -+ FN_ENTER; -+ -+ /* Let's see if we can follow this: -+ first we select our memory block size (which I think is -+ completely arbitrary) */ -+ MemoryBlockSize.size = cpu_to_le16(adev->memblocksize); -+ -+ /* Then we alert the card to our decision of block size */ -+ if (OK != acx_s_configure(adev, &MemoryBlockSize, ACX100_IE_BLOCK_SIZE)) { -+ goto bad; -+ } -+ -+ /* We figure out how many total blocks we can create, using -+ the block size we chose, and the beginning and ending -+ memory pointers, i.e.: end-start/size */ -+ TotalMemoryBlocks = (le32_to_cpu(mmt->PoolEnd) - le32_to_cpu(mmt->PoolStart)) / adev->memblocksize; -+ -+ log(L_DEBUG, "TotalMemoryBlocks=%u (%u bytes)\n", -+ TotalMemoryBlocks, TotalMemoryBlocks*adev->memblocksize); -+ -+ /* MemoryConfigOption.DMA_config bitmask: -+ access to ACX memory is to be done: -+ 0x00080000 using PCI conf space?! -+ 0x00040000 using IO instructions? -+ 0x00000000 using memory access instructions -+ 0x00020000 using local memory block linked list (else what?) -+ 0x00010000 using host indirect descriptors (else host must access ACX memory?) -+ */ -+#if defined (ACX_MEM) -+ /* -+ * ACX ignores DMA_config for generic slave mode. -+ */ -+ MemoryConfigOption.DMA_config = 0; -+ /* Declare start of the Rx host pool */ -+ MemoryConfigOption.pRxHostDesc = cpu2acx(0); -+ log(L_DEBUG, "pRxHostDesc 0x%08X, rxhostdesc_startphy 0x%lX\n", -+ acx2cpu(MemoryConfigOption.pRxHostDesc), -+ (long)adev->rxhostdesc_startphy); -+#else -+ if (IS_PCI(adev)) { -+ MemoryConfigOption.DMA_config = cpu_to_le32(0x30000); -+ /* Declare start of the Rx host pool */ -+ MemoryConfigOption.pRxHostDesc = cpu2acx(adev->rxhostdesc_startphy); -+ log(L_DEBUG, "pRxHostDesc 0x%08X, rxhostdesc_startphy 0x%lX\n", -+ acx2cpu(MemoryConfigOption.pRxHostDesc), -+ (long)adev->rxhostdesc_startphy); -+ } else { -+ MemoryConfigOption.DMA_config = cpu_to_le32(0x20000); -+ } -+#endif -+ -+ /* 50% of the allotment of memory blocks go to tx descriptors */ -+ TxBlockNum = TotalMemoryBlocks / 2; -+ MemoryConfigOption.TxBlockNum = cpu_to_le16(TxBlockNum); -+ -+ /* and 50% go to the rx descriptors */ -+ RxBlockNum = TotalMemoryBlocks - TxBlockNum; -+ MemoryConfigOption.RxBlockNum = cpu_to_le16(RxBlockNum); -+ -+ /* size of the tx and rx descriptor queues */ -+ TotalTxBlockSize = TxBlockNum * adev->memblocksize; -+ TotalRxBlockSize = RxBlockNum * adev->memblocksize; -+ log(L_DEBUG, "TxBlockNum %u RxBlockNum %u TotalTxBlockSize %u " -+ "TotalTxBlockSize %u\n", TxBlockNum, RxBlockNum, -+ TotalTxBlockSize, TotalRxBlockSize); -+ -+ -+ /* align the tx descriptor queue to an alignment of 0x20 (32 bytes) */ -+ MemoryConfigOption.rx_mem = -+ cpu_to_le32((le32_to_cpu(mmt->PoolStart) + 0x1f) & ~0x1f); -+ -+ /* align the rx descriptor queue to units of 0x20 -+ * and offset it by the tx descriptor queue */ -+ MemoryConfigOption.tx_mem = -+ cpu_to_le32((le32_to_cpu(mmt->PoolStart) + TotalRxBlockSize + 0x1f) & ~0x1f); -+ log(L_DEBUG, "rx_mem %08X rx_mem %08X\n", -+ MemoryConfigOption.tx_mem, MemoryConfigOption.rx_mem); -+ -+ /* alert the device to our decision */ -+ if (OK != acx_s_configure(adev, &MemoryConfigOption, ACX1xx_IE_MEMORY_CONFIG_OPTIONS)) { -+ goto bad; -+ } -+ -+ /* and tell the device to kick it into gear */ -+ if (OK != acx_s_issue_cmd(adev, ACX100_CMD_INIT_MEMORY, NULL, 0)) { -+ goto bad; -+ } -+#ifdef ACX_MEM -+ /* -+ * slave memory interface has to manage the transmit pools for the ACX, -+ * so it needs to know what we chose here. -+ */ -+ adev->acx_txbuf_start = MemoryConfigOption.tx_mem; -+ adev->acx_txbuf_numblocks = MemoryConfigOption.TxBlockNum; -+#endif -+ -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx100_s_create_dma_regions -+** -+** Note that this fn messes up heavily with hardware, but we cannot -+** lock it (we need to sleep). Not a problem since IRQs can't happen -+*/ -+static int -+acx100_s_create_dma_regions(acx_device_t *adev) -+{ -+ acx100_ie_queueconfig_t queueconf; -+ acx_ie_memmap_t memmap; -+ int res = NOT_OK; -+ u32 tx_queue_start, rx_queue_start; -+ -+ FN_ENTER; -+ -+ /* read out the acx100 physical start address for the queues */ -+ if (OK != acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) { -+ goto fail; -+ } -+ -+ tx_queue_start = le32_to_cpu(memmap.QueueStart); -+ rx_queue_start = tx_queue_start + TX_CNT * sizeof(txdesc_t); -+ -+ log(L_DEBUG, "initializing Queue Indicator\n"); -+ -+ memset(&queueconf, 0, sizeof(queueconf)); -+ -+ /* Not needed for PCI or slave memory, so we can avoid setting them altogether */ -+ if (IS_USB(adev)) { -+ queueconf.NumTxDesc = USB_TX_CNT; -+ queueconf.NumRxDesc = USB_RX_CNT; -+ } -+ -+ /* calculate size of queues */ -+ queueconf.AreaSize = cpu_to_le32( -+ TX_CNT * sizeof(txdesc_t) + -+ RX_CNT * sizeof(rxdesc_t) + 8 -+ ); -+ queueconf.NumTxQueues = 1; /* number of tx queues */ -+ /* sets the beginning of the tx descriptor queue */ -+ queueconf.TxQueueStart = memmap.QueueStart; -+ /* done by memset: queueconf.TxQueuePri = 0; */ -+ queueconf.RxQueueStart = cpu_to_le32(rx_queue_start); -+ queueconf.QueueOptions = 1; /* auto reset descriptor */ -+ /* sets the end of the rx descriptor queue */ -+ queueconf.QueueEnd = cpu_to_le32( -+ rx_queue_start + RX_CNT * sizeof(rxdesc_t) -+ ); -+ /* sets the beginning of the next queue */ -+ queueconf.HostQueueEnd = cpu_to_le32(le32_to_cpu(queueconf.QueueEnd) + 8); -+ if (OK != acx_s_configure(adev, &queueconf, ACX1xx_IE_QUEUE_CONFIG)) { -+ goto fail; -+ } -+ -+#if defined (ACX_MEM) -+ /* sets the beginning of the rx descriptor queue, after the tx descrs */ -+ adev->acx_queue_indicator = -+ (queueindicator_t *) le32_to_cpu (queueconf.QueueEnd); -+ if (OK != acxmem_s_create_hostdesc_queues(adev)) -+ goto fail; -+ -+ acxmem_create_desc_queues(adev, tx_queue_start, rx_queue_start); -+#else -+ if (IS_PCI(adev)) { -+ /* sets the beginning of the rx descriptor queue, after the tx descrs */ -+ if (OK != acxpci_s_create_hostdesc_queues(adev)) -+ goto fail; -+ acxpci_create_desc_queues(adev, tx_queue_start, rx_queue_start); -+ } -+#endif -+ -+ if (OK != acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) { -+ goto fail; -+ } -+ -+ /* -+ * Have to make sure we skip past the Queue Indicator (QueueEnd) and Host Queue Indicator -+ * maps, each of which are 8 bytes and follow immediately after the transmit and -+ * receive queues. -+ */ -+ memmap.PoolStart = cpu_to_le32( -+ (le32_to_cpu(memmap.QueueEnd) + 4 + 0x1f) & ~0x1f -+ ); -+ -+ if (OK != acx_s_configure(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) { -+ goto fail; -+ } -+ -+ if (OK != acx100_s_init_memory_pools(adev, &memmap)) { -+ goto fail; -+ } -+ -+ res = OK; -+ goto end; -+ -+fail: -+ acx_s_msleep(1000); /* ? */ -+#if defined (ACX_MEM) -+ acxmem_free_desc_queues(adev); -+#else -+ if (IS_PCI(adev)) -+ acxpci_free_desc_queues(adev); -+#endif -+end: -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acx111_s_create_dma_regions -+** -+** Note that this fn messes heavily with hardware, but we cannot -+** lock it (we need to sleep). Not a problem since IRQs can't happen -+*/ -+#define ACX111_PERCENT(percent) ((percent)/5) -+ -+static int -+acx111_s_create_dma_regions(acx_device_t *adev) -+{ -+ struct acx111_ie_memoryconfig memconf; -+ struct acx111_ie_queueconfig queueconf; -+ u32 tx_queue_start, rx_queue_start; -+ -+ FN_ENTER; -+ -+ /* Calculate memory positions and queue sizes */ -+ -+ /* Set up our host descriptor pool + data pool */ -+#if defined (ACX_MEM) -+ if (OK != acxmem_s_create_hostdesc_queues(adev)) -+ goto fail; -+#else -+ if (IS_PCI(adev)) { -+ if (OK != acxpci_s_create_hostdesc_queues(adev)) -+ goto fail; -+ } -+#endif -+ -+ memset(&memconf, 0, sizeof(memconf)); -+ /* the number of STAs (STA contexts) to support -+ ** NB: was set to 1 and everything seemed to work nevertheless... */ -+ memconf.no_of_stations = cpu_to_le16(VEC_SIZE(adev->sta_list)); -+ /* specify the memory block size. Default is 256 */ -+ memconf.memory_block_size = cpu_to_le16(adev->memblocksize); -+ /* let's use 50%/50% for tx/rx (specify percentage, units of 5%) */ -+ memconf.tx_rx_memory_block_allocation = ACX111_PERCENT(50); -+ /* set the count of our queues -+ ** NB: struct acx111_ie_memoryconfig shall be modified -+ ** if we ever will switch to more than one rx and/or tx queue */ -+ memconf.count_rx_queues = 1; -+ memconf.count_tx_queues = 1; -+ /* 0 == Busmaster Indirect Memory Organization, which is what we want -+ * (using linked host descs with their allocated mem). -+ * 2 == Generic Bus Slave */ -+ /* done by memset: memconf.options = 0; */ -+ /* let's use 25% for fragmentations and 75% for frame transfers -+ * (specified in units of 5%) */ -+ memconf.fragmentation = ACX111_PERCENT(75); -+ /* Rx descriptor queue config */ -+ memconf.rx_queue1_count_descs = RX_CNT; -+ memconf.rx_queue1_type = 7; /* must be set to 7 */ -+ /* done by memset: memconf.rx_queue1_prio = 0; low prio */ -+#if defined (ACX_MEM) -+ memconf.rx_queue1_host_rx_start = cpu2acx(adev->rxhostdesc_startphy); -+#else -+ if (IS_PCI(adev)) { -+ memconf.rx_queue1_host_rx_start = cpu2acx(adev->rxhostdesc_startphy); -+ } -+#endif -+ /* Tx descriptor queue config */ -+ memconf.tx_queue1_count_descs = TX_CNT; -+ /* done by memset: memconf.tx_queue1_attributes = 0; lowest priority */ -+ -+ /* NB1: this looks wrong: (memconf,ACX1xx_IE_QUEUE_CONFIG), -+ ** (queueconf,ACX1xx_IE_MEMORY_CONFIG_OPTIONS) look swapped, eh? -+ ** But it is actually correct wrt IE numbers. -+ ** NB2: sizeof(memconf) == 28 == 0x1c but configure(ACX1xx_IE_QUEUE_CONFIG) -+ ** writes 0x20 bytes (because same IE for acx100 uses struct acx100_ie_queueconfig -+ ** which is 4 bytes larger. what a mess. TODO: clean it up) */ -+ if (OK != acx_s_configure(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG)) { -+ goto fail; -+ } -+ -+ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); -+ -+ tx_queue_start = le32_to_cpu(queueconf.tx1_queue_address); -+ rx_queue_start = le32_to_cpu(queueconf.rx1_queue_address); -+ -+ log(L_INIT, "dump queue head (from card):\n" -+ "len: %u\n" -+ "tx_memory_block_address: %X\n" -+ "rx_memory_block_address: %X\n" -+ "tx1_queue address: %X\n" -+ "rx1_queue address: %X\n", -+ le16_to_cpu(queueconf.len), -+ le32_to_cpu(queueconf.tx_memory_block_address), -+ le32_to_cpu(queueconf.rx_memory_block_address), -+ tx_queue_start, -+ rx_queue_start); -+ -+#if defined (ACX_MEM) -+ acxmem_create_desc_queues(adev, tx_queue_start, rx_queue_start); -+#else -+ if (IS_PCI(adev)) -+ acxpci_create_desc_queues(adev, tx_queue_start, rx_queue_start); -+#endif -+ -+ FN_EXIT1(OK); -+ return OK; -+fail: -+#if defined (ACX_MEM) -+ acxmem_free_desc_queues(adev); -+#else -+ if (IS_PCI(adev)) -+ acxpci_free_desc_queues(adev); -+#endif -+ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+static void -+acx_s_initialize_rx_config(acx_device_t *adev) -+{ -+ struct { -+ u16 id; -+ u16 len; -+ u16 rx_cfg1; -+ u16 rx_cfg2; -+ } ACX_PACKED cfg; -+ -+ switch (adev->mode) { -+ case ACX_MODE_OFF: -+ adev->rx_config_1 = (u16) (0 -+ /* | RX_CFG1_INCLUDE_RXBUF_HDR */ -+ /* | RX_CFG1_FILTER_SSID */ -+ /* | RX_CFG1_FILTER_BCAST */ -+ /* | RX_CFG1_RCV_MC_ADDR1 */ -+ /* | RX_CFG1_RCV_MC_ADDR0 */ -+ /* | RX_CFG1_FILTER_ALL_MULTI */ -+ /* | RX_CFG1_FILTER_BSSID */ -+ /* | RX_CFG1_FILTER_MAC */ -+ /* | RX_CFG1_RCV_PROMISCUOUS */ -+ /* | RX_CFG1_INCLUDE_FCS */ -+ /* | RX_CFG1_INCLUDE_PHY_HDR */ -+ ); -+ adev->rx_config_2 = (u16) (0 -+ /*| RX_CFG2_RCV_ASSOC_REQ */ -+ /*| RX_CFG2_RCV_AUTH_FRAMES */ -+ /*| RX_CFG2_RCV_BEACON_FRAMES */ -+ /*| RX_CFG2_RCV_CONTENTION_FREE */ -+ /*| RX_CFG2_RCV_CTRL_FRAMES */ -+ /*| RX_CFG2_RCV_DATA_FRAMES */ -+ /*| RX_CFG2_RCV_BROKEN_FRAMES */ -+ /*| RX_CFG2_RCV_MGMT_FRAMES */ -+ /*| RX_CFG2_RCV_PROBE_REQ */ -+ /*| RX_CFG2_RCV_PROBE_RESP */ -+ /*| RX_CFG2_RCV_ACK_FRAMES */ -+ /*| RX_CFG2_RCV_OTHER */ -+ ); -+ break; -+ case ACX_MODE_MONITOR: -+ adev->rx_config_1 = (u16) (0 -+ /* | RX_CFG1_INCLUDE_RXBUF_HDR */ -+ /* | RX_CFG1_FILTER_SSID */ -+ /* | RX_CFG1_FILTER_BCAST */ -+ /* | RX_CFG1_RCV_MC_ADDR1 */ -+ /* | RX_CFG1_RCV_MC_ADDR0 */ -+ /* | RX_CFG1_FILTER_ALL_MULTI */ -+ /* | RX_CFG1_FILTER_BSSID */ -+ /* | RX_CFG1_FILTER_MAC */ -+ | RX_CFG1_RCV_PROMISCUOUS -+ /* | RX_CFG1_INCLUDE_FCS */ -+ /* | RX_CFG1_INCLUDE_PHY_HDR */ -+ ); -+ adev->rx_config_2 = (u16) (0 -+ | RX_CFG2_RCV_ASSOC_REQ -+ | RX_CFG2_RCV_AUTH_FRAMES -+ | RX_CFG2_RCV_BEACON_FRAMES -+ | RX_CFG2_RCV_CONTENTION_FREE -+ | RX_CFG2_RCV_CTRL_FRAMES -+ | RX_CFG2_RCV_DATA_FRAMES -+ | RX_CFG2_RCV_BROKEN_FRAMES -+ | RX_CFG2_RCV_MGMT_FRAMES -+ | RX_CFG2_RCV_PROBE_REQ -+ | RX_CFG2_RCV_PROBE_RESP -+ | RX_CFG2_RCV_ACK_FRAMES -+ | RX_CFG2_RCV_OTHER -+ ); -+ break; -+ default: -+ adev->rx_config_1 = (u16) (0 -+ /* | RX_CFG1_INCLUDE_RXBUF_HDR */ -+ /* | RX_CFG1_FILTER_SSID */ -+ /* | RX_CFG1_FILTER_BCAST */ -+ /* | RX_CFG1_RCV_MC_ADDR1 */ -+ /* | RX_CFG1_RCV_MC_ADDR0 */ -+ /* | RX_CFG1_FILTER_ALL_MULTI */ -+ /* | RX_CFG1_FILTER_BSSID */ -+ | RX_CFG1_FILTER_MAC -+ /* | RX_CFG1_RCV_PROMISCUOUS */ -+ /* | RX_CFG1_INCLUDE_FCS */ -+ /* | RX_CFG1_INCLUDE_PHY_HDR */ -+ ); -+ adev->rx_config_2 = (u16) (0 -+ | RX_CFG2_RCV_ASSOC_REQ -+ | RX_CFG2_RCV_AUTH_FRAMES -+ | RX_CFG2_RCV_BEACON_FRAMES -+ | RX_CFG2_RCV_CONTENTION_FREE -+ | RX_CFG2_RCV_CTRL_FRAMES -+ | RX_CFG2_RCV_DATA_FRAMES -+ /*| RX_CFG2_RCV_BROKEN_FRAMES */ -+ | RX_CFG2_RCV_MGMT_FRAMES -+ | RX_CFG2_RCV_PROBE_REQ -+ | RX_CFG2_RCV_PROBE_RESP -+ /*| RX_CFG2_RCV_ACK_FRAMES */ -+ | RX_CFG2_RCV_OTHER -+ ); -+ break; -+ } -+ adev->rx_config_1 |= RX_CFG1_INCLUDE_RXBUF_HDR; -+ -+ if ((adev->rx_config_1 & RX_CFG1_INCLUDE_PHY_HDR) -+ || (adev->firmware_numver >= 0x02000000)) -+ adev->phy_header_len = IS_ACX111(adev) ? 8 : 4; -+ else -+ adev->phy_header_len = 0; -+ -+ log(L_INIT, "setting RXconfig to %04X:%04X\n", -+ adev->rx_config_1, adev->rx_config_2); -+ cfg.rx_cfg1 = cpu_to_le16(adev->rx_config_1); -+ cfg.rx_cfg2 = cpu_to_le16(adev->rx_config_2); -+ acx_s_configure(adev, &cfg, ACX1xx_IE_RXCONFIG); -+} -+ -+ -+/*********************************************************************** -+** acx_s_set_defaults -+*/ -+void -+acx_s_set_defaults(acx_device_t *adev) -+{ -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ /* do it before getting settings, prevent bogus channel 0 warning */ -+ adev->channel = 1; -+ -+ /* query some settings from the card. -+ * NOTE: for some settings, e.g. CCA and ED (ACX100!), an initial -+ * query is REQUIRED, otherwise the card won't work correctly! */ -+ adev->get_mask = GETSET_ANTENNA|GETSET_SENSITIVITY|GETSET_STATION_ID|GETSET_REG_DOMAIN; -+ /* Only ACX100 supports ED and CCA */ -+ if (IS_ACX100(adev)) -+ adev->get_mask |= GETSET_CCA|GETSET_ED_THRESH; -+ -+ acx_s_update_card_settings(adev); -+ -+ acx_lock(adev, flags); -+ -+ /* set our global interrupt mask */ -+#if defined (ACX_MEM) -+ acxmem_set_interrupt_mask(adev); -+#else -+ if (IS_PCI(adev)) -+ acxpci_set_interrupt_mask(adev); -+#endif -+ -+ adev->led_power = 1; /* LED is active on startup */ -+ adev->brange_max_quality = 60; /* LED blink max quality is 60 */ -+ adev->brange_time_last_state_change = jiffies; -+ -+ /* copy the MAC address we just got from the card -+ * into our MAC address used during current 802.11 session */ -+ MAC_COPY(adev->dev_addr, adev->ndev->dev_addr); -+ MAC_BCAST(adev->ap); -+ -+ adev->essid_len = -+ snprintf(adev->essid, sizeof(adev->essid), "STA%02X%02X%02X", -+ adev->dev_addr[3], adev->dev_addr[4], adev->dev_addr[5]); -+ adev->essid_active = 1; -+ -+ /* we have a nick field to waste, so why not abuse it -+ * to announce the driver version? ;-) */ -+ strncpy(adev->nick, "acx " ACX_RELEASE, IW_ESSID_MAX_SIZE); -+ -+#if defined (ACX_MEM) -+ adev->reg_dom_id = adev->cfgopt_domains.list[0]; -+#else -+ if (IS_PCI(adev)) { /* FIXME: this should be made to apply to USB, too! */ -+ /* first regulatory domain entry in EEPROM == default reg. domain */ -+ adev->reg_dom_id = adev->cfgopt_domains.list[0]; -+ } -+#endif -+ -+ /* 0xffff would be better, but then we won't get a "scan complete" -+ * interrupt, so our current infrastructure will fail: */ -+ adev->scan_count = 1; -+ adev->scan_mode = ACX_SCAN_OPT_ACTIVE; -+ adev->scan_duration = 100; -+ adev->scan_probe_delay = 200; -+ /* reported to break scanning: adev->scan_probe_delay = adev->cfgopt_probe_delay; */ -+ adev->scan_rate = ACX_SCAN_RATE_1; -+ -+ adev->mode = ACX_MODE_2_STA; -+ adev->auth_alg = WLAN_AUTH_ALG_OPENSYSTEM; -+ adev->listen_interval = 100; -+ adev->beacon_interval = DEFAULT_BEACON_INTERVAL; -+ adev->dtim_interval = DEFAULT_DTIM_INTERVAL; -+ -+ adev->msdu_lifetime = DEFAULT_MSDU_LIFETIME; -+ -+ adev->rts_threshold = DEFAULT_RTS_THRESHOLD; -+ adev->frag_threshold = 2346; -+ -+ /* use standard default values for retry limits */ -+ adev->short_retry = 7; /* max. retries for (short) non-RTS packets */ -+ adev->long_retry = 4; /* max. retries for long (RTS) packets */ -+ -+ adev->preamble_mode = 2; /* auto */ -+ adev->fallback_threshold = 3; -+ adev->stepup_threshold = 10; -+ adev->rate_bcast = RATE111_1; -+ adev->rate_bcast100 = RATE100_1; -+ adev->rate_basic = RATE111_1 | RATE111_2; -+ adev->rate_auto = 1; -+ if (IS_ACX111(adev)) { -+ adev->rate_oper = RATE111_ALL; -+ } else { -+ adev->rate_oper = RATE111_ACX100_COMPAT; -+ } -+ -+ /* Supported Rates element - the rates here are given in units of -+ * 500 kbit/s, plus 0x80 added. See 802.11-1999.pdf item 7.3.2.2 */ -+ acx_l_update_ratevector(adev); -+ -+ /* set some more defaults */ -+ if (IS_ACX111(adev)) { -+ /* 30mW (15dBm) is default, at least in my acx111 card: */ -+ adev->tx_level_dbm = 15; -+ } else { -+ /* don't use max. level, since it might be dangerous -+ * (e.g. WRT54G people experience -+ * excessive Tx power damage!) */ -+ adev->tx_level_dbm = 18; -+ /* -+ * Lower power for the iPaq hx4700 -+ */ -+ if (IS_MEM(adev)) { -+ adev->tx_level_dbm = 14; -+ } -+ } -+ /* adev->tx_level_auto = 1; */ -+ if (IS_ACX111(adev)) { -+ /* start with sensitivity level 1 out of 3: */ -+ adev->sensitivity = 1; -+ } -+ -+/* #define ENABLE_POWER_SAVE */ -+#ifdef ENABLE_POWER_SAVE -+ adev->ps_wakeup_cfg = PS_CFG_ENABLE | PS_CFG_WAKEUP_ALL_BEAC; -+ adev->ps_listen_interval = 1; -+ adev->ps_options = PS_OPT_ENA_ENHANCED_PS | PS_OPT_TX_PSPOLL | PS_OPT_STILL_RCV_BCASTS; -+ adev->ps_hangover_period = 30; -+ adev->ps_enhanced_transition_time = 0; -+#else -+ adev->ps_wakeup_cfg = 0; -+ adev->ps_listen_interval = 0; -+ adev->ps_options = 0; -+ adev->ps_hangover_period = 0; -+ adev->ps_enhanced_transition_time = 0; -+#endif -+ -+ /* These settings will be set in fw on ifup */ -+ adev->set_mask = 0 -+ | GETSET_RETRY -+ | SET_MSDU_LIFETIME -+ /* configure card to do rate fallback when in auto rate mode */ -+ | SET_RATE_FALLBACK -+ | SET_RXCONFIG -+ | GETSET_TXPOWER -+ /* better re-init the antenna value we got above */ -+ | GETSET_ANTENNA -+#if POWER_SAVE_80211 -+ | GETSET_POWER_80211 -+#endif -+ ; -+ -+ acx_unlock(adev, flags); -+ acx_lock_unhold(); /* hold time 844814 CPU ticks @2GHz */ -+ -+ acx_s_initialize_rx_config(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** FIXME: this should be solved in a general way for all radio types -+** by decoding the radio firmware module, -+** since it probably has some standard structure describing how to -+** set the power level of the radio module which it controls. -+** Or maybe not, since the radio module probably has a function interface -+** instead which then manages Tx level programming :-\ -+*/ -+static int -+acx111_s_set_tx_level(acx_device_t *adev, u8 level_dbm) -+{ -+ struct acx111_ie_tx_level tx_level; -+ -+ /* my acx111 card has two power levels in its configoptions (== EEPROM): -+ * 1 (30mW) [15dBm] -+ * 2 (10mW) [10dBm] -+ * For now, just assume all other acx111 cards have the same. -+ * FIXME: Ideally we would query it here, but we first need a -+ * standard way to query individual configoptions easily. -+ * Well, now we have proper cfgopt txpower variables, but this still -+ * hasn't been done yet, since it also requires dBm <-> mW conversion here... */ -+ if (level_dbm <= 12) { -+ tx_level.level = 2; /* 10 dBm */ -+ adev->tx_level_dbm = 10; -+ } else { -+ tx_level.level = 1; /* 15 dBm */ -+ adev->tx_level_dbm = 15; -+ } -+ if (level_dbm != adev->tx_level_dbm) -+ log(L_INIT, "acx111 firmware has specific " -+ "power levels only: adjusted %d dBm to %d dBm!\n", -+ level_dbm, adev->tx_level_dbm); -+ -+ return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); -+} -+ -+static int -+acx_s_set_tx_level(acx_device_t *adev, u8 level_dbm) -+{ -+ if (IS_ACX111(adev)) { -+ return acx111_s_set_tx_level(adev, level_dbm); -+ } -+#if defined (ACX_MEM) -+ return acx100mem_s_set_tx_level(adev, level_dbm); -+#else -+ if (IS_PCI(adev)) { -+ return acx100pci_s_set_tx_level(adev, level_dbm); -+ } -+#endif -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+#ifdef UNUSED -+/* Returns the current tx level (ACX111) */ -+static u8 -+acx111_s_get_tx_level(acx_device_t *adev) -+{ -+ struct acx111_ie_tx_level tx_level; -+ -+ tx_level.level = 0; -+ acx_s_interrogate(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); -+ return tx_level.level; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_l_rxmonitor -+** Called from IRQ context only -+*/ -+static void -+acx_l_rxmonitor(acx_device_t *adev, const rxbuffer_t *rxbuf) -+{ -+ wlansniffrm_t *msg; -+ struct sk_buff *skb; -+ void *datap; -+ unsigned int skb_len; -+ int payload_offset; -+ -+ FN_ENTER; -+ -+ /* we are in big luck: the acx100 doesn't modify any of the fields */ -+ /* in the 802.11 frame. just pass this packet into the PF_PACKET */ -+ /* subsystem. yeah. */ -+ payload_offset = ((u8*)acx_get_wlan_hdr(adev, rxbuf) - (u8*)rxbuf); -+ skb_len = RXBUF_BYTES_USED(rxbuf) - payload_offset; -+ -+ /* sanity check */ -+ if (unlikely(skb_len > WLAN_A4FR_MAXLEN_WEP)) { -+ printk("%s: monitor mode panic: oversized frame!\n", -+ adev->ndev->name); -+ goto end; -+ } -+ -+ if (adev->ndev->type == ARPHRD_IEEE80211_PRISM) -+ skb_len += sizeof(*msg); -+ -+ /* allocate skb */ -+ skb = dev_alloc_skb(skb_len); -+ if (unlikely(!skb)) { -+ printk("%s: no memory for skb (%u bytes)\n", -+ adev->ndev->name, skb_len); -+ goto end; -+ } -+ -+ skb_put(skb, skb_len); -+ -+ if (adev->ndev->type == ARPHRD_IEEE80211) { -+ /* when in raw 802.11 mode, just copy frame as-is */ -+ datap = skb->data; -+ } else if (adev->ndev->type == ARPHRD_IEEE80211_PRISM) { -+ /* emulate prism header */ -+ msg = (wlansniffrm_t*)skb->data; -+ datap = msg + 1; -+ -+ msg->msgcode = WLANSNIFFFRM; -+ msg->msglen = sizeof(*msg); -+ strncpy(msg->devname, adev->ndev->name, sizeof(msg->devname)-1); -+ msg->devname[sizeof(msg->devname)-1] = '\0'; -+ -+ msg->hosttime.did = WLANSNIFFFRM_hosttime; -+ msg->hosttime.status = WLANITEM_STATUS_data_ok; -+ msg->hosttime.len = 4; -+ msg->hosttime.data = jiffies; -+ -+ msg->mactime.did = WLANSNIFFFRM_mactime; -+ msg->mactime.status = WLANITEM_STATUS_data_ok; -+ msg->mactime.len = 4; -+ msg->mactime.data = rxbuf->time; -+ -+ msg->channel.did = WLANSNIFFFRM_channel; -+ msg->channel.status = WLANITEM_STATUS_data_ok; -+ msg->channel.len = 4; -+ msg->channel.data = adev->channel; -+ -+ msg->rssi.did = WLANSNIFFFRM_rssi; -+ msg->rssi.status = WLANITEM_STATUS_no_value; -+ msg->rssi.len = 4; -+ msg->rssi.data = 0; -+ -+ msg->sq.did = WLANSNIFFFRM_sq; -+ msg->sq.status = WLANITEM_STATUS_no_value; -+ msg->sq.len = 4; -+ msg->sq.data = 0; -+ -+ msg->signal.did = WLANSNIFFFRM_signal; -+ msg->signal.status = WLANITEM_STATUS_data_ok; -+ msg->signal.len = 4; -+ msg->signal.data = rxbuf->phy_snr; -+ -+ msg->noise.did = WLANSNIFFFRM_noise; -+ msg->noise.status = WLANITEM_STATUS_data_ok; -+ msg->noise.len = 4; -+ msg->noise.data = rxbuf->phy_level; -+ -+ msg->rate.did = WLANSNIFFFRM_rate; -+ msg->rate.status = WLANITEM_STATUS_data_ok; -+ msg->rate.len = 4; -+ msg->rate.data = rxbuf->phy_plcp_signal / 5; -+ -+ msg->istx.did = WLANSNIFFFRM_istx; -+ msg->istx.status = WLANITEM_STATUS_data_ok; -+ msg->istx.len = 4; -+ msg->istx.data = 0; /* tx=0: it's not a tx packet */ -+ -+ skb_len -= sizeof(*msg); -+ -+ msg->frmlen.did = WLANSNIFFFRM_signal; -+ msg->frmlen.status = WLANITEM_STATUS_data_ok; -+ msg->frmlen.len = 4; -+ msg->frmlen.data = skb_len; -+ } else { -+ printk("acx: unsupported netdev type %d!\n", adev->ndev->type); -+ dev_kfree_skb(skb); -+ return; -+ } -+ -+ /* sanity check (keep it here) */ -+ if (unlikely((int)skb_len < 0)) { -+ printk("acx: skb_len=%d. Driver bug, please report\n", (int)skb_len); -+ dev_kfree_skb(skb); -+ return; -+ } -+ memcpy(datap, ((unsigned char*)rxbuf)+payload_offset, skb_len); -+ -+ skb->dev = adev->ndev; -+ skb->dev->last_rx = jiffies; -+ -+ skb_reset_mac_header(skb); -+ skb->ip_summed = CHECKSUM_NONE; -+ skb->pkt_type = PACKET_OTHERHOST; -+ skb->protocol = htons(ETH_P_80211_RAW); -+ netif_rx(skb); -+ -+ adev->stats.rx_packets++; -+ adev->stats.rx_bytes += skb->len; -+ -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_rx_ieee802_11_frame -+** -+** Called from IRQ context only -+*/ -+ -+/* All these contortions are for saner dup logging -+** -+** We want: (a) to know about excessive dups -+** (b) to not spam kernel log about occasional dups -+** -+** 1/64 threshold was chosen by running "ping -A" -+** It gave "rx: 59 DUPs in 2878 packets" only with 4 parallel -+** "ping -A" streams running. */ -+/* 2005-10-11: bumped up to 1/8 -+** subtract a $smallint from dup_count in order to -+** avoid "2 DUPs in 19 packets" messages */ -+static inline int -+acx_l_handle_dup(acx_device_t *adev, u16 seq) -+{ -+ if (adev->dup_count) { -+ adev->nondup_count++; -+ if (time_after(jiffies, adev->dup_msg_expiry)) { -+ /* Log only if more than 1 dup in 64 packets */ -+ if (adev->nondup_count/8 < adev->dup_count-5) { -+ printk(KERN_INFO "%s: rx: %d DUPs in " -+ "%d packets received in 10 secs\n", -+ adev->ndev->name, -+ adev->dup_count, -+ adev->nondup_count); -+ } -+ adev->dup_count = 0; -+ adev->nondup_count = 0; -+ } -+ } -+ if (unlikely(seq == adev->last_seq_ctrl)) { -+ if (!adev->dup_count++) -+ adev->dup_msg_expiry = jiffies + 10*HZ; -+ adev->stats.rx_errors++; -+ return 1; /* a dup */ -+ } -+ adev->last_seq_ctrl = seq; -+ return 0; -+} -+ -+static int -+acx_l_rx_ieee802_11_frame(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ unsigned int ftype, fstype; -+ const wlan_hdr_t *hdr; -+ int result = NOT_OK; -+ -+ FN_ENTER; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ -+ /* see IEEE 802.11-1999.pdf chapter 7 "MAC frame formats" */ -+ if (unlikely((hdr->fc & WF_FC_PVERi) != 0)) { -+ printk_ratelimited(KERN_INFO "rx: unsupported 802.11 protocol\n"); -+ goto end; -+ } -+ -+ ftype = hdr->fc & WF_FC_FTYPEi; -+ fstype = hdr->fc & WF_FC_FSTYPEi; -+ -+ switch (ftype) { -+ /* check data frames first, for speed */ -+ case WF_FTYPE_DATAi: -+ switch (fstype) { -+ case WF_FSTYPE_DATAONLYi: -+ if (acx_l_handle_dup(adev, hdr->seq)) -+ break; /* a dup, simply discard it */ -+ -+ /* TODO: -+ if (WF_FC_FROMTODSi == (hdr->fc & WF_FC_FROMTODSi)) { -+ result = acx_l_process_data_frame_wds(adev, rxbuf); -+ break; -+ } -+ */ -+ -+ switch (adev->mode) { -+ case ACX_MODE_3_AP: -+ result = acx_l_process_data_frame_master(adev, rxbuf); -+ break; -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ result = acx_l_process_data_frame_client(adev, rxbuf); -+ break; -+ } -+ case WF_FSTYPE_DATA_CFACKi: -+ case WF_FSTYPE_DATA_CFPOLLi: -+ case WF_FSTYPE_DATA_CFACK_CFPOLLi: -+ case WF_FSTYPE_CFPOLLi: -+ case WF_FSTYPE_CFACK_CFPOLLi: -+ /* see above. -+ acx_process_class_frame(adev, rxbuf, 3); */ -+ break; -+ case WF_FSTYPE_NULLi: -+ /* acx_l_process_NULL_frame(adev, rxbuf, 3); */ -+ break; -+ /* FIXME: same here, see above */ -+ case WF_FSTYPE_CFACKi: -+ default: -+ break; -+ } -+ break; -+ case WF_FTYPE_MGMTi: -+ result = acx_l_process_mgmt_frame(adev, rxbuf); -+ break; -+ case WF_FTYPE_CTLi: -+ if (fstype == WF_FSTYPE_PSPOLLi) -+ result = OK; -+ /* this call is irrelevant, since -+ * acx_process_class_frame is a stub, so return -+ * immediately instead. -+ * return acx_process_class_frame(adev, rxbuf, 3); */ -+ break; -+ default: -+ break; -+ } -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_rxbuf -+** -+** NB: used by USB code also -+*/ -+void -+acx_l_process_rxbuf(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ struct wlan_hdr *hdr; -+ unsigned int qual; -+ int buf_len; -+ u16 fc; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ fc = le16_to_cpu(hdr->fc); -+ /* length of frame from control field to first byte of FCS */ -+ buf_len = RXBUF_BYTES_RCVD(adev, rxbuf); -+ -+ if ( ((WF_FC_FSTYPE & fc) != WF_FSTYPE_BEACON) -+ || (acx_debug & L_XFER_BEACON) -+ ) { -+ log(L_XFER|L_DATA, "rx: %s " -+ "time:%u len:%u signal:%u SNR:%u macstat:%02X " -+ "phystat:%02X phyrate:%u status:%u\n", -+ acx_get_packet_type_string(fc), -+ le32_to_cpu(rxbuf->time), -+ buf_len, -+ acx_signal_to_winlevel(rxbuf->phy_level), -+ acx_signal_to_winlevel(rxbuf->phy_snr), -+ rxbuf->mac_status, -+ rxbuf->phy_stat_baseband, -+ rxbuf->phy_plcp_signal, -+ adev->status); -+ } -+ -+ if (unlikely(acx_debug & L_DATA)) { -+ printk("rx: 802.11 buf[%u]: ", buf_len); -+ acx_dump_bytes(hdr, buf_len); -+ } -+ -+ /* FIXME: should check for Rx errors (rxbuf->mac_status? -+ * discard broken packets - but NOT for monitor!) -+ * and update Rx packet statistics here */ -+ -+ if (unlikely(adev->mode == ACX_MODE_MONITOR)) { -+ acx_l_rxmonitor(adev, rxbuf); -+ } else if (likely(buf_len >= WLAN_HDR_A3_LEN)) { -+ acx_l_rx_ieee802_11_frame(adev, rxbuf); -+ } else { -+ log(L_DEBUG|L_XFER|L_DATA, -+ "rx: NOT receiving packet (%s): " -+ "size too small (%u)\n", -+ acx_get_packet_type_string(fc), -+ buf_len); -+ } -+ -+ /* Now check Rx quality level, AFTER processing packet. -+ * I tried to figure out how to map these levels to dBm -+ * values, but for the life of me I really didn't -+ * manage to get it. Either these values are not meant to -+ * be expressed in dBm, or it's some pretty complicated -+ * calculation. */ -+ -+#ifdef FROM_SCAN_SOURCE_ONLY -+ /* only consider packets originating from the MAC -+ * address of the device that's managing our BSSID. -+ * Disable it for now, since it removes information (levels -+ * from different peers) and slows the Rx path. */ -+ if (adev->ap_client -+ && mac_is_equal(hdr->a2, adev->ap_client->address)) { -+#endif -+ adev->wstats.qual.level = acx_signal_to_winlevel(rxbuf->phy_level); -+ adev->wstats.qual.noise = acx_signal_to_winlevel(rxbuf->phy_snr); -+#ifndef OLD_QUALITY -+ qual = acx_signal_determine_quality(adev->wstats.qual.level, -+ adev->wstats.qual.noise); -+#else -+ qual = (adev->wstats.qual.noise <= 100) ? -+ 100 - adev->wstats.qual.noise : 0; -+#endif -+ adev->wstats.qual.qual = qual; -+ adev->wstats.qual.updated = 7; /* all 3 indicators updated */ -+#ifdef FROM_SCAN_SOURCE_ONLY -+ } -+#endif -+} -+ -+ -+/*********************************************************************** -+** acx_l_handle_txrate_auto -+** -+** Theory of operation: -+** client->rate_cap is a bitmask of rates client is capable of. -+** client->rate_cfg is a bitmask of allowed (configured) rates. -+** It is set as a result of iwconfig rate N [auto] -+** or iwpriv set_rates "N,N,N N,N,N" commands. -+** It can be fixed (e.g. 0x0080 == 18Mbit only), -+** auto (0x00ff == 18Mbit or any lower value), -+** and code handles any bitmask (0x1081 == try 54Mbit,18Mbit,1Mbit _only_). -+** -+** client->rate_cur is a value for rate111 field in tx descriptor. -+** It is always set to txrate_cfg sans zero or more most significant -+** bits. This routine handles selection of new rate_cur value depending on -+** outcome of last tx event. -+** -+** client->rate_100 is a precalculated rate value for acx100 -+** (we can do without it, but will need to calculate it on each tx). -+** -+** You cannot configure mixed usage of 5.5 and/or 11Mbit rate -+** with PBCC and CCK modulation. Either both at CCK or both at PBCC. -+** In theory you can implement it, but so far it is considered not worth doing. -+** -+** 22Mbit, of course, is PBCC always. */ -+ -+/* maps acx100 tx descr rate field to acx111 one */ -+static u16 -+rate100to111(u8 r) -+{ -+ switch (r) { -+ case RATE100_1: return RATE111_1; -+ case RATE100_2: return RATE111_2; -+ case RATE100_5: -+ case (RATE100_5 | RATE100_PBCC511): return RATE111_5; -+ case RATE100_11: -+ case (RATE100_11 | RATE100_PBCC511): return RATE111_11; -+ case RATE100_22: return RATE111_22; -+ default: -+ printk("acx: unexpected acx100 txrate: %u! " -+ "Please report\n", r); -+ return RATE111_1; -+ } -+} -+ -+ -+void -+acx_l_handle_txrate_auto(acx_device_t *adev, struct client *txc, -+ u16 cur, u8 rate100, u16 rate111, -+ u8 error, int pkts_to_ignore) -+{ -+ u16 sent_rate; -+ int slower_rate_was_used; -+ -+ /* vda: hmm. current code will do this: -+ ** 1. send packets at 11 Mbit, stepup++ -+ ** 2. will try to send at 22Mbit. hardware will see no ACK, -+ ** retries at 11Mbit, success. code notes that used rate -+ ** is lower. stepup = 0, fallback++ -+ ** 3. repeat step 2 fallback_count times. Fall back to -+ ** 11Mbit. go to step 1. -+ ** If stepup_count is large (say, 16) and fallback_count -+ ** is small (3), this wouldn't be too bad wrt throughput */ -+ -+ if (unlikely(!cur)) { -+ printk("acx: BUG! ratemask is empty\n"); -+ return; /* or else we may lock up the box */ -+ } -+ -+ /* do some preparations, i.e. calculate the one rate that was -+ * used to send this packet */ -+ if (IS_ACX111(adev)) { -+ sent_rate = 1 << highest_bit(rate111 & RATE111_ALL); -+ } else { -+ sent_rate = rate100to111(rate100); -+ } -+ /* sent_rate has only one bit set now, corresponding to tx rate -+ * which was used by hardware to tx this particular packet */ -+ -+ /* now do the actual auto rate management */ -+ log(L_XFER, "tx: %sclient=%p/"MACSTR" used=%04X cur=%04X cfg=%04X " -+ "__=%u/%u ^^=%u/%u\n", -+ (txc->ignore_count > 0) ? "[IGN] " : "", -+ txc, MAC(txc->address), sent_rate, cur, txc->rate_cfg, -+ txc->fallback_count, adev->fallback_threshold, -+ txc->stepup_count, adev->stepup_threshold -+ ); -+ -+ /* we need to ignore old packets already in the tx queue since -+ * they use older rate bytes configured before our last rate change, -+ * otherwise our mechanism will get confused by interpreting old data. -+ * Do it after logging above */ -+ if (txc->ignore_count) { -+ txc->ignore_count--; -+ return; -+ } -+ -+ /* true only if the only nonzero bit in sent_rate is -+ ** less significant than highest nonzero bit in cur */ -+ slower_rate_was_used = ( cur > ((sent_rate<<1)-1) ); -+ -+ if (slower_rate_was_used || error) { -+ txc->stepup_count = 0; -+ if (++txc->fallback_count <= adev->fallback_threshold) -+ return; -+ txc->fallback_count = 0; -+ -+ /* clear highest 1 bit in cur */ -+ sent_rate = RATE111_54; -+ while (!(cur & sent_rate)) sent_rate >>= 1; -+ CLEAR_BIT(cur, sent_rate); -+ if (!cur) /* we can't disable all rates! */ -+ cur = sent_rate; -+ log(L_XFER, "tx: falling back to ratemask %04X\n", cur); -+ -+ } else { /* there was neither lower rate nor error */ -+ txc->fallback_count = 0; -+ if (++txc->stepup_count <= adev->stepup_threshold) -+ return; -+ txc->stepup_count = 0; -+ -+ /* Sanitize. Sort of not needed, but I dont trust hw that much... -+ ** what if it can report bogus tx rates sometimes? */ -+ while (!(cur & sent_rate)) sent_rate >>= 1; -+ -+ /* try to find a higher sent_rate that isn't yet in our -+ * current set, but is an allowed cfg */ -+ while (1) { -+ sent_rate <<= 1; -+ if (sent_rate > txc->rate_cfg) -+ /* no higher rates allowed by config */ -+ return; -+ if (!(cur & sent_rate) && (txc->rate_cfg & sent_rate)) -+ /* found */ -+ break; -+ /* not found, try higher one */ -+ } -+ SET_BIT(cur, sent_rate); -+ log(L_XFER, "tx: stepping up to ratemask %04X\n", cur); -+ } -+ -+ txc->rate_cur = cur; -+ txc->ignore_count = pkts_to_ignore; -+ /* calculate acx100 style rate byte if needed */ -+ if (IS_ACX100(adev)) { -+ txc->rate_100 = acx_bitpos2rate100[highest_bit(cur)]; -+ } -+} -+ -+ -+/*********************************************************************** -+** acx_i_start_xmit -+** -+** Called by network core. Can be called outside of process context. -+*/ -+int -+acx_i_start_xmit(struct sk_buff *skb, struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ tx_t *tx; -+ void *txbuf; -+ unsigned long flags; -+ int txresult = NOT_OK; -+ int len; -+ -+ FN_ENTER; -+ -+ if (unlikely(!skb)) { -+ /* indicate success */ -+ txresult = OK; -+ goto end_no_unlock; -+ } -+ if (unlikely(!adev)) { -+ goto end_no_unlock; -+ } -+ -+ acx_lock(adev, flags); -+ -+ if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) { -+ goto end; -+ } -+ if (unlikely(adev->mode == ACX_MODE_OFF)) { -+ goto end; -+ } -+ if (unlikely(acx_queue_stopped(ndev))) { -+ log(L_DEBUG, "%s: called when queue stopped\n", __func__); -+ goto end; -+ } -+ if (unlikely(ACX_STATUS_4_ASSOCIATED != adev->status)) { -+ log(L_XFER, "trying to xmit, but not associated yet: " -+ "aborting...\n"); -+ /* silently drop the packet, since we're not connected yet */ -+ txresult = OK; -+ /* ...but indicate an error nevertheless */ -+ adev->stats.tx_errors++; -+ goto end; -+ } -+ -+ tx = acx_l_alloc_tx(adev); -+ if (unlikely(!tx)) { -+#ifndef ACX_MEM -+ /* -+ * generic slave interface has to make do with the tiny amount, around -+ * 7k, of transmit buffer space on the ACX itself. It is likely this will -+ * frequently be full. -+ */ -+ printk_ratelimited("%s: start_xmit: txdesc ring is full, " -+ "dropping tx\n", ndev->name); -+#endif -+ txresult = NOT_OK; -+ goto end; -+ } -+ -+ txbuf = acx_l_get_txbuf(adev, tx); -+ if (unlikely(!txbuf)) { -+ /* Card was removed */ -+ txresult = NOT_OK; -+ acx_l_dealloc_tx(adev, tx); -+ goto end; -+ } -+ len = acx_ether_to_txbuf(adev, txbuf, skb); -+ if (unlikely(len < 0)) { -+ /* Error in packet conversion */ -+ txresult = NOT_OK; -+ acx_l_dealloc_tx(adev, tx); -+ goto end; -+ } -+ acx_l_tx_data(adev, tx, len); -+ ndev->trans_start = jiffies; -+ -+ txresult = OK; -+ adev->stats.tx_packets++; -+ adev->stats.tx_bytes += skb->len; -+ -+end: -+ acx_unlock(adev, flags); -+ -+end_no_unlock: -+ if ((txresult == OK) && skb) -+ dev_kfree_skb_any(skb); -+ -+ FN_EXIT1(txresult); -+ return txresult; -+} -+ -+ -+/*********************************************************************** -+** acx_l_update_ratevector -+** -+** Updates adev->rate_supported[_len] according to rate_{basic,oper} -+*/ -+const u8 -+acx_bitpos2ratebyte[] = { -+ DOT11RATEBYTE_1, -+ DOT11RATEBYTE_2, -+ DOT11RATEBYTE_5_5, -+ DOT11RATEBYTE_6_G, -+ DOT11RATEBYTE_9_G, -+ DOT11RATEBYTE_11, -+ DOT11RATEBYTE_12_G, -+ DOT11RATEBYTE_18_G, -+ DOT11RATEBYTE_22, -+ DOT11RATEBYTE_24_G, -+ DOT11RATEBYTE_36_G, -+ DOT11RATEBYTE_48_G, -+ DOT11RATEBYTE_54_G, -+}; -+ -+void -+acx_l_update_ratevector(acx_device_t *adev) -+{ -+ u16 bcfg = adev->rate_basic; -+ u16 ocfg = adev->rate_oper; -+ u8 *supp = adev->rate_supported; -+ const u8 *dot11 = acx_bitpos2ratebyte; -+ -+ FN_ENTER; -+ -+ while (ocfg) { -+ if (ocfg & 1) { -+ *supp = *dot11; -+ if (bcfg & 1) { -+ *supp |= 0x80; -+ } -+ supp++; -+ } -+ dot11++; -+ ocfg >>= 1; -+ bcfg >>= 1; -+ } -+ adev->rate_supported_len = supp - adev->rate_supported; -+ if (acx_debug & L_ASSOC) { -+ printk("new ratevector: "); -+ acx_dump_bytes(adev->rate_supported, adev->rate_supported_len); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_init -+*/ -+static void -+acx_l_sta_list_init(acx_device_t *adev) -+{ -+ FN_ENTER; -+ memset(adev->sta_hash_tab, 0, sizeof(adev->sta_hash_tab)); -+ memset(adev->sta_list, 0, sizeof(adev->sta_list)); -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_get_from_hash -+*/ -+static inline client_t* -+acx_l_sta_list_get_from_hash(acx_device_t *adev, const u8 *address) -+{ -+ return adev->sta_hash_tab[address[5] % VEC_SIZE(adev->sta_hash_tab)]; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_get -+*/ -+client_t* -+acx_l_sta_list_get(acx_device_t *adev, const u8 *address) -+{ -+ client_t *client; -+ FN_ENTER; -+ client = acx_l_sta_list_get_from_hash(adev, address); -+ while (client) { -+ if (mac_is_equal(address, client->address)) { -+ client->mtime = jiffies; -+ break; -+ } -+ client = client->next; -+ } -+ FN_EXIT0; -+ return client; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_del -+*/ -+void -+acx_l_sta_list_del(acx_device_t *adev, client_t *victim) -+{ -+ client_t *client, *next; -+ -+ client = acx_l_sta_list_get_from_hash(adev, victim->address); -+ next = client; -+ /* tricky. next = client on first iteration only, -+ ** on all other iters next = client->next */ -+ while (next) { -+ if (next == victim) { -+ client->next = victim->next; -+ /* Overkill */ -+ memset(victim, 0, sizeof(*victim)); -+ break; -+ } -+ client = next; -+ next = client->next; -+ } -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_alloc -+** -+** Never fails - will evict oldest client if needed -+*/ -+static client_t* -+acx_l_sta_list_alloc(acx_device_t *adev) -+{ -+ int i; -+ unsigned long age, oldest_age; -+ client_t *client, *oldest; -+ -+ FN_ENTER; -+ -+ oldest = &adev->sta_list[0]; -+ oldest_age = 0; -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ client = &adev->sta_list[i]; -+ -+ if (!client->used) { -+ goto found; -+ } else { -+ age = jiffies - client->mtime; -+ if (oldest_age < age) { -+ oldest_age = age; -+ oldest = client; -+ } -+ } -+ } -+ acx_l_sta_list_del(adev, oldest); -+ client = oldest; -+found: -+ memset(client, 0, sizeof(*client)); -+ FN_EXIT0; -+ return client; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_add -+** -+** Never fails - will evict oldest client if needed -+*/ -+/* In case we will reimplement it differently... */ -+#define STA_LIST_ADD_CAN_FAIL 0 -+ -+static client_t* -+acx_l_sta_list_add(acx_device_t *adev, const u8 *address) -+{ -+ client_t *client; -+ int index; -+ -+ FN_ENTER; -+ -+ client = acx_l_sta_list_alloc(adev); -+ -+ client->mtime = jiffies; -+ MAC_COPY(client->address, address); -+ client->used = CLIENT_EXIST_1; -+ client->auth_alg = WLAN_AUTH_ALG_SHAREDKEY; -+ client->auth_step = 1; -+ /* give some tentative peer rate values -+ ** (needed because peer may do auth without probing us first, -+ ** thus we'll have no idea of peer's ratevector yet). -+ ** Will be overwritten by scanning or assoc code */ -+ client->rate_cap = adev->rate_basic; -+ client->rate_cfg = adev->rate_basic; -+ client->rate_cur = 1 << lowest_bit(adev->rate_basic); -+ -+ index = address[5] % VEC_SIZE(adev->sta_hash_tab); -+ client->next = adev->sta_hash_tab[index]; -+ adev->sta_hash_tab[index] = client; -+ -+ acxlog_mac(L_ASSOC, "sta_list_add: sta=", address, "\n"); -+ -+ FN_EXIT0; -+ return client; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_get_or_add -+** -+** Never fails - will evict oldest client if needed -+*/ -+static client_t* -+acx_l_sta_list_get_or_add(acx_device_t *adev, const u8 *address) -+{ -+ client_t *client = acx_l_sta_list_get(adev, address); -+ if (!client) -+ client = acx_l_sta_list_add(adev, address); -+ return client; -+} -+ -+ -+/*********************************************************************** -+** acx_set_status -+** -+** This function is called in many atomic regions, must not sleep -+** -+** This function does not need locking UNLESS you call it -+** as acx_set_status(ACX_STATUS_4_ASSOCIATED), bacause this can -+** wake queue. This can race with stop_queue elsewhere. -+** See acx_stop_queue comment. */ -+void -+acx_set_status(acx_device_t *adev, u16 new_status) -+{ -+#define QUEUE_OPEN_AFTER_ASSOC 1 /* this really seems to be needed now */ -+ u16 old_status = adev->status; -+ -+ FN_ENTER; -+ -+ log(L_ASSOC, "%s(%d):%s\n", -+ __func__, new_status, acx_get_status_name(new_status)); -+ -+ /* wireless_send_event never sleeps */ -+ if (ACX_STATUS_4_ASSOCIATED == new_status) { -+ union iwreq_data wrqu; -+ -+ wrqu.data.length = 0; -+ wrqu.data.flags = 0; -+ wireless_send_event(adev->ndev, SIOCGIWSCAN, &wrqu, NULL); -+ -+ wrqu.data.length = 0; -+ wrqu.data.flags = 0; -+ MAC_COPY(wrqu.ap_addr.sa_data, adev->bssid); -+ wrqu.ap_addr.sa_family = ARPHRD_ETHER; -+ wireless_send_event(adev->ndev, SIOCGIWAP, &wrqu, NULL); -+ } else { -+ union iwreq_data wrqu; -+ -+ /* send event with empty BSSID to indicate we're not associated */ -+ MAC_ZERO(wrqu.ap_addr.sa_data); -+ wrqu.ap_addr.sa_family = ARPHRD_ETHER; -+ wireless_send_event(adev->ndev, SIOCGIWAP, &wrqu, NULL); -+ } -+ -+ adev->status = new_status; -+ -+ switch (new_status) { -+ case ACX_STATUS_1_SCANNING: -+ adev->scan_retries = 0; -+ /* 1.0 s initial scan time */ -+ acx_set_timer(adev, 1000000); -+ break; -+ case ACX_STATUS_2_WAIT_AUTH: -+ case ACX_STATUS_3_AUTHENTICATED: -+ adev->auth_or_assoc_retries = 0; -+ acx_set_timer(adev, 1500000); /* 1.5 s */ -+ break; -+ } -+ -+#if QUEUE_OPEN_AFTER_ASSOC -+ if (new_status == ACX_STATUS_4_ASSOCIATED) { -+ if (old_status < ACX_STATUS_4_ASSOCIATED) { -+ /* ah, we're newly associated now, -+ * so let's indicate carrier */ -+ acx_carrier_on(adev->ndev, "after association"); -+ acx_wake_queue(adev->ndev, "after association"); -+ } -+ } else { -+ /* not associated any more, so let's kill carrier */ -+ if (old_status >= ACX_STATUS_4_ASSOCIATED) { -+ acx_carrier_off(adev->ndev, "after losing association"); -+ acx_stop_queue(adev->ndev, "after losing association"); -+ } -+ } -+#endif -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_i_timer -+** -+** Fires up periodically. Used to kick scan/auth/assoc if something goes wrong -+*/ -+void -+acx_i_timer(unsigned long address) -+{ -+ unsigned long flags; -+ acx_device_t *adev = (acx_device_t*)address; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ log(L_DEBUG|L_ASSOC, "%s: adev->status=%d (%s)\n", -+ __func__, adev->status, acx_get_status_name(adev->status)); -+ -+ switch (adev->status) { -+ case ACX_STATUS_1_SCANNING: -+ /* was set to 0 by set_status() */ -+ if (++adev->scan_retries < 7) { -+ acx_set_timer(adev, 1000000); -+ /* used to interrogate for scan status. -+ ** We rely on SCAN_COMPLETE IRQ instead */ -+ log(L_ASSOC, "continuing scan (%d sec)\n", -+ adev->scan_retries); -+ } else { -+ log(L_ASSOC, "stopping scan\n"); -+ /* send stop_scan cmd when we leave the interrupt context, -+ * and make a decision what to do next (COMPLETE_SCAN) */ -+ acx_schedule_task(adev, -+ ACX_AFTER_IRQ_CMD_STOP_SCAN + ACX_AFTER_IRQ_COMPLETE_SCAN); -+ } -+ break; -+ case ACX_STATUS_2_WAIT_AUTH: -+ /* was set to 0 by set_status() */ -+ if (++adev->auth_or_assoc_retries < 10) { -+ log(L_ASSOC, "resend authen1 request (attempt %d)\n", -+ adev->auth_or_assoc_retries + 1); -+ acx_l_transmit_authen1(adev); -+ } else { -+ /* time exceeded: fall back to scanning mode */ -+ log(L_ASSOC, -+ "authen1 request reply timeout, giving up\n"); -+ /* we are a STA, need to find AP anyhow */ -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); -+ acx_schedule_task(adev, ACX_AFTER_IRQ_RESTART_SCAN); -+ } -+ /* used to be 1500000, but some other driver uses 2.5s */ -+ acx_set_timer(adev, 2500000); -+ break; -+ case ACX_STATUS_3_AUTHENTICATED: -+ /* was set to 0 by set_status() */ -+ if (++adev->auth_or_assoc_retries < 10) { -+ log(L_ASSOC, "resend assoc request (attempt %d)\n", -+ adev->auth_or_assoc_retries + 1); -+ acx_l_transmit_assoc_req(adev); -+ } else { -+ /* time exceeded: give up */ -+ log(L_ASSOC, -+ "association request reply timeout, giving up\n"); -+ /* we are a STA, need to find AP anyhow */ -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); -+ acx_schedule_task(adev, ACX_AFTER_IRQ_RESTART_SCAN); -+ } -+ acx_set_timer(adev, 2500000); /* see above */ -+ break; -+ case ACX_STATUS_4_ASSOCIATED: -+ default: -+ break; -+ } -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_set_timer -+** -+** Sets the 802.11 state management timer's timeout. -+*/ -+void -+acx_set_timer(acx_device_t *adev, int timeout_us) -+{ -+ FN_ENTER; -+ -+ log(L_DEBUG|L_IRQ, "%s(%u ms)\n", __func__, timeout_us/1000); -+ if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { -+ printk("attempt to set the timer " -+ "when the card interface is not up!\n"); -+ goto end; -+ } -+ -+ /* first check if the timer was already initialized, THEN modify it */ -+ if (adev->mgmt_timer.function) { -+ mod_timer(&adev->mgmt_timer, -+ jiffies + (timeout_us * HZ / 1000000)); -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_assocresp -+** -+** We are an AP here -+*/ -+static const u8 -+dot11ratebyte[] = { -+ DOT11RATEBYTE_1, -+ DOT11RATEBYTE_2, -+ DOT11RATEBYTE_5_5, -+ DOT11RATEBYTE_6_G, -+ DOT11RATEBYTE_9_G, -+ DOT11RATEBYTE_11, -+ DOT11RATEBYTE_12_G, -+ DOT11RATEBYTE_18_G, -+ DOT11RATEBYTE_22, -+ DOT11RATEBYTE_24_G, -+ DOT11RATEBYTE_36_G, -+ DOT11RATEBYTE_48_G, -+ DOT11RATEBYTE_54_G, -+}; -+ -+static inline int -+find_pos(const u8 *p, int size, u8 v) -+{ -+ int i; -+ for (i = 0; i < size; i++) -+ if (p[i] == v) -+ return i; -+ /* printk a message about strange byte? */ -+ return 0; -+} -+ -+static void -+add_bits_to_ratemasks(u8* ratevec, int len, u16* brate, u16* orate) -+{ -+ while (len--) { -+ int n = 1 << find_pos(dot11ratebyte, -+ sizeof(dot11ratebyte), *ratevec & 0x7f); -+ if (*ratevec & 0x80) -+ *brate |= n; -+ *orate |= n; -+ ratevec++; -+ } -+} -+ -+static int -+acx_l_transmit_assocresp(acx_device_t *adev, const wlan_fr_assocreq_t *req) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct assocresp_frame_body *body; -+ u8 *p; -+ const u8 *da; -+ /* const u8 *sa; */ -+ const u8 *bssid; -+ client_t *clt; -+ -+ FN_ENTER; -+ -+ /* sa = req->hdr->a1; */ -+ da = req->hdr->a2; -+ bssid = req->hdr->a3; -+ -+ clt = acx_l_sta_list_get(adev, da); -+ if (!clt) -+ goto ok; -+ -+ /* Assoc without auth is a big no-no */ -+ /* Let's be liberal: if already assoc'ed STA sends assoc req again, -+ ** we won't be rude */ -+ if (clt->used != CLIENT_AUTHENTICATED_2 -+ && clt->used != CLIENT_ASSOCIATED_3) { -+ acx_l_transmit_deauthen(adev, da, WLAN_MGMT_REASON_CLASS2_NONAUTH); -+ goto bad; -+ } -+ -+ clt->used = CLIENT_ASSOCIATED_3; -+ -+ if (clt->aid == 0) -+ clt->aid = ++adev->aid; -+ clt->cap_info = ieee2host16(*(req->cap_info)); -+ -+ /* We cheat here a bit. We don't really care which rates are flagged -+ ** as basic by the client, so we stuff them in single ratemask */ -+ clt->rate_cap = 0; -+ if (req->supp_rates) -+ add_bits_to_ratemasks(req->supp_rates->rates, -+ req->supp_rates->len, &clt->rate_cap, &clt->rate_cap); -+ if (req->ext_rates) -+ add_bits_to_ratemasks(req->ext_rates->rates, -+ req->ext_rates->len, &clt->rate_cap, &clt->rate_cap); -+ /* We can check that client supports all basic rates, -+ ** and deny assoc if not. But let's be liberal, right? ;) */ -+ clt->rate_cfg = clt->rate_cap & adev->rate_oper; -+ if (!clt->rate_cfg) clt->rate_cfg = 1 << lowest_bit(adev->rate_oper); -+ clt->rate_cur = 1 << lowest_bit(clt->rate_cfg); -+ if (IS_ACX100(adev)) -+ clt->rate_100 = acx_bitpos2rate100[lowest_bit(clt->rate_cfg)]; -+ clt->fallback_count = clt->stepup_count = 0; -+ clt->ignore_count = 16; -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_ASSOCRESPi; -+ head->dur = req->hdr->dur; -+ MAC_COPY(head->da, da); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, bssid); -+ head->seq = req->hdr->seq; -+ -+ body->cap_info = host2ieee16(adev->capabilities); -+ body->status = host2ieee16(0); -+ body->aid = host2ieee16(clt->aid); -+ p = wlan_fill_ie_rates((u8*)&body->rates, adev->rate_supported_len, -+ adev->rate_supported); -+ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, -+ adev->rate_supported); -+ -+ acx_l_tx_data(adev, tx, p - (u8*)head); -+ok: -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+* acx_l_transmit_reassocresp -+ -+You may be wondering, just like me, what the hell ReAuth is. -+In practice it was seen sent by STA when STA feels like losing connection. -+ -+[802.11] -+ -+5.4.2.3 Reassociation -+ -+Association is sufficient for no-transition message delivery between -+IEEE 802.11 stations. Additional functionality is needed to support -+BSS-transition mobility. The additional required functionality -+is provided by the reassociation service. Reassociation is a DSS. -+The reassociation service is invoked to 'move' a current association -+from one AP to another. This keeps the DS informed of the current -+mapping between AP and STA as the station moves from BSS to BSS within -+an ESS. Reassociation also enables changing association attributes -+of an established association while the STA remains associated with -+the same AP. Reassociation is always initiated by the mobile STA. -+ -+5.4.3.1 Authentication -+... -+A STA may be authenticated with many other STAs at any given instant. -+ -+5.4.3.1.1 Preauthentication -+ -+Because the authentication process could be time-consuming (depending -+on the authentication protocol in use), the authentication service can -+be invoked independently of the association service. Preauthentication -+is typically done by a STA while it is already associated with an AP -+(with which it previously authenticated). IEEE 802.11 does not require -+that STAs preauthenticate with APs. However, authentication is required -+before an association can be established. If the authentication is left -+until reassociation time, this may impact the speed with which a STA can -+reassociate between APs, limiting BSS-transition mobility performance. -+The use of preauthentication takes the authentication service overhead -+out of the time-critical reassociation process. -+ -+5.7.3 Reassociation -+ -+For a STA to reassociate, the reassociation service causes the following -+message to occur: -+ -+ Reassociation request -+ -+* Message type: Management -+* Message subtype: Reassociation request -+* Information items: -+ - IEEE address of the STA -+ - IEEE address of the AP with which the STA will reassociate -+ - IEEE address of the AP with which the STA is currently associated -+ - ESSID -+* Direction of message: From STA to 'new' AP -+ -+The address of the current AP is included for efficiency. The inclusion -+of the current AP address facilitates MAC reassociation to be independent -+of the DS implementation. -+ -+ Reassociation response -+* Message type: Management -+* Message subtype: Reassociation response -+* Information items: -+ - Result of the requested reassociation. (success/failure) -+ - If the reassociation is successful, the response shall include the AID. -+* Direction of message: From AP to STA -+ -+7.2.3.6 Reassociation Request frame format -+ -+The frame body of a management frame of subtype Reassociation Request -+contains the information shown in Table 9. -+ -+Table 9 Reassociation Request frame body -+Order Information -+1 Capability information -+2 Listen interval -+3 Current AP address -+4 SSID -+5 Supported rates -+ -+7.2.3.7 Reassociation Response frame format -+ -+The frame body of a management frame of subtype Reassociation Response -+contains the information shown in Table 10. -+ -+Table 10 Reassociation Response frame body -+Order Information -+1 Capability information -+2 Status code -+3 Association ID (AID) -+4 Supported rates -+ -+*/ -+static int -+acx_l_transmit_reassocresp(acx_device_t *adev, const wlan_fr_reassocreq_t *req) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct reassocresp_frame_body *body; -+ u8 *p; -+ const u8 *da; -+ /* const u8 *sa; */ -+ const u8 *bssid; -+ client_t *clt; -+ -+ FN_ENTER; -+ -+ /* sa = req->hdr->a1; */ -+ da = req->hdr->a2; -+ bssid = req->hdr->a3; -+ -+ /* Must be already authenticated, so it must be in the list */ -+ clt = acx_l_sta_list_get(adev, da); -+ if (!clt) -+ goto ok; -+ -+ /* Assoc without auth is a big no-no */ -+ /* Already assoc'ed STAs sending ReAssoc req are ok per 802.11 */ -+ if (clt->used != CLIENT_AUTHENTICATED_2 -+ && clt->used != CLIENT_ASSOCIATED_3) { -+ acx_l_transmit_deauthen(adev, da, WLAN_MGMT_REASON_CLASS2_NONAUTH); -+ goto bad; -+ } -+ -+ clt->used = CLIENT_ASSOCIATED_3; -+ if (clt->aid == 0) { -+ clt->aid = ++adev->aid; -+ } -+ if (req->cap_info) -+ clt->cap_info = ieee2host16(*(req->cap_info)); -+ -+ /* We cheat here a bit. We don't really care which rates are flagged -+ ** as basic by the client, so we stuff them in single ratemask */ -+ clt->rate_cap = 0; -+ if (req->supp_rates) -+ add_bits_to_ratemasks(req->supp_rates->rates, -+ req->supp_rates->len, &clt->rate_cap, &clt->rate_cap); -+ if (req->ext_rates) -+ add_bits_to_ratemasks(req->ext_rates->rates, -+ req->ext_rates->len, &clt->rate_cap, &clt->rate_cap); -+ /* We can check that client supports all basic rates, -+ ** and deny assoc if not. But let's be liberal, right? ;) */ -+ clt->rate_cfg = clt->rate_cap & adev->rate_oper; -+ if (!clt->rate_cfg) clt->rate_cfg = 1 << lowest_bit(adev->rate_oper); -+ clt->rate_cur = 1 << lowest_bit(clt->rate_cfg); -+ if (IS_ACX100(adev)) -+ clt->rate_100 = acx_bitpos2rate100[lowest_bit(clt->rate_cfg)]; -+ -+ clt->fallback_count = clt->stepup_count = 0; -+ clt->ignore_count = 16; -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto ok; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto ok; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_REASSOCRESPi; -+ head->dur = req->hdr->dur; -+ MAC_COPY(head->da, da); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, bssid); -+ head->seq = req->hdr->seq; -+ -+ /* IEs: 1. caps */ -+ body->cap_info = host2ieee16(adev->capabilities); -+ /* 2. status code */ -+ body->status = host2ieee16(0); -+ /* 3. AID */ -+ body->aid = host2ieee16(clt->aid); -+ /* 4. supp rates */ -+ p = wlan_fill_ie_rates((u8*)&body->rates, adev->rate_supported_len, -+ adev->rate_supported); -+ /* 5. ext supp rates */ -+ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, -+ adev->rate_supported); -+ -+ acx_l_tx_data(adev, tx, p - (u8*)head); -+ok: -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_disassoc_from_sta -+*/ -+static void -+acx_l_process_disassoc_from_sta(acx_device_t *adev, const wlan_fr_disassoc_t *req) -+{ -+ const u8 *ta; -+ client_t *clt; -+ -+ FN_ENTER; -+ -+ ta = req->hdr->a2; -+ clt = acx_l_sta_list_get(adev, ta); -+ if (!clt) -+ goto end; -+ -+ if (clt->used != CLIENT_ASSOCIATED_3 -+ && clt->used != CLIENT_AUTHENTICATED_2) { -+ /* it's disassociating, but it's -+ ** not even authenticated! Let it know that */ -+ acxlog_mac(L_ASSOC|L_XFER, "peer ", ta, "has sent disassoc " -+ "req but it is not even auth'ed! sending deauth\n"); -+ acx_l_transmit_deauthen(adev, ta, -+ WLAN_MGMT_REASON_CLASS2_NONAUTH); -+ clt->used = CLIENT_EXIST_1; -+ } else { -+ /* mark it as auth'ed only */ -+ clt->used = CLIENT_AUTHENTICATED_2; -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_deauthen_from_sta -+*/ -+static void -+acx_l_process_deauth_from_sta(acx_device_t *adev, const wlan_fr_deauthen_t *req) -+{ -+ const wlan_hdr_t *hdr; -+ client_t *client; -+ -+ FN_ENTER; -+ -+ hdr = req->hdr; -+ -+ if (acx_debug & L_ASSOC) { -+ acx_print_mac("got deauth from sta:", hdr->a2, " "); -+ acx_print_mac("a1:", hdr->a1, " "); -+ acx_print_mac("a3:", hdr->a3, " "); -+ acx_print_mac("adev->addr:", adev->dev_addr, " "); -+ acx_print_mac("adev->bssid:", adev->bssid, "\n"); -+ } -+ -+ if (!mac_is_equal(adev->dev_addr, hdr->a1)) { -+ goto end; -+ } -+ -+ client = acx_l_sta_list_get(adev, hdr->a2); -+ if (!client) { -+ goto end; -+ } -+ client->used = CLIENT_EXIST_1; -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_disassoc_from_ap -+*/ -+static void -+acx_l_process_disassoc_from_ap(acx_device_t *adev, const wlan_fr_disassoc_t *req) -+{ -+ FN_ENTER; -+ -+ if (!adev->ap_client) { -+ /* Hrm, we aren't assoc'ed yet anyhow... */ -+ goto end; -+ } -+ -+ printk("%s: got disassoc frame with reason %d (%s)\n", -+ adev->ndev->name, *req->reason, -+ acx_wlan_reason_str(*req->reason)); -+ -+ if (mac_is_equal(adev->dev_addr, req->hdr->a1)) { -+ acx_l_transmit_deauthen(adev, adev->bssid, -+ WLAN_MGMT_REASON_DEAUTH_LEAVING); -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_deauth_from_ap -+*/ -+static void -+acx_l_process_deauth_from_ap(acx_device_t *adev, const wlan_fr_deauthen_t *req) -+{ -+ FN_ENTER; -+ -+ if (!adev->ap_client) { -+ /* Hrm, we aren't assoc'ed yet anyhow... */ -+ goto end; -+ } -+ -+ printk("%s: got deauth frame with reason %d (%s)\n", -+ adev->ndev->name, *req->reason, -+ acx_wlan_reason_str(*req->reason)); -+ -+ /* Chk: is ta verified to be from our AP? */ -+ if (mac_is_equal(adev->dev_addr, req->hdr->a1)) { -+ log(L_DEBUG, "AP sent us deauth packet\n"); -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_rx -+** -+** The end of the Rx path. Pulls data from a rxhostdesc into a socket -+** buffer and feeds it to the network stack via netif_rx(). -+*/ -+static void -+acx_l_rx(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ FN_ENTER; -+ if (likely(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { -+ struct sk_buff *skb; -+ skb = acx_rxbuf_to_ether(adev, rxbuf); -+ if (likely(skb)) { -+ netif_rx(skb); -+ adev->ndev->last_rx = jiffies; -+ adev->stats.rx_packets++; -+ adev->stats.rx_bytes += skb->len; -+ } -+ } -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_data_frame_master -+*/ -+static int -+acx_l_process_data_frame_master(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ struct wlan_hdr *hdr; -+ struct tx *tx; -+ void *txbuf; -+ int len; -+ int result = NOT_OK; -+ -+ FN_ENTER; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ -+ switch (WF_FC_FROMTODSi & hdr->fc) { -+ case 0: -+ case WF_FC_FROMDSi: -+ log(L_DEBUG, "ap->sta or adhoc->adhoc data frame ignored\n"); -+ goto done; -+ case WF_FC_TODSi: -+ break; -+ default: /* WF_FC_FROMTODSi */ -+ log(L_DEBUG, "wds data frame ignored (TODO)\n"); -+ goto done; -+ } -+ -+ /* check if it is our BSSID, if not, leave */ -+ if (!mac_is_equal(adev->bssid, hdr->a1)) { -+ goto done; -+ } -+ -+ if (mac_is_equal(adev->dev_addr, hdr->a3)) { -+ /* this one is for us */ -+ acx_l_rx(adev, rxbuf); -+ } else { -+ if (mac_is_bcast(hdr->a3)) { -+ /* this one is bcast, rx it too */ -+ acx_l_rx(adev, rxbuf); -+ } -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) { -+ goto fail; -+ } -+ /* repackage, tx, and hope it someday reaches its destination */ -+ /* order is important, we do it in-place */ -+ MAC_COPY(hdr->a1, hdr->a3); -+ MAC_COPY(hdr->a3, hdr->a2); -+ MAC_COPY(hdr->a2, adev->bssid); -+ /* To_DS = 0, From_DS = 1 */ -+ hdr->fc = WF_FC_FROMDSi + WF_FTYPE_DATAi; -+ -+ txbuf = acx_l_get_txbuf(adev, tx); -+ if (txbuf) { -+ len = RXBUF_BYTES_RCVD(adev, rxbuf); -+ memcpy(txbuf, hdr, len); -+ acx_l_tx_data(adev, tx, len); -+ } else { -+ acx_l_dealloc_tx(adev, tx); -+ } -+ } -+done: -+ result = OK; -+fail: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_data_frame_client -+*/ -+static int -+acx_l_process_data_frame_client(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ const u8 *da, *bssid; -+ const wlan_hdr_t *hdr; -+ struct net_device *ndev = adev->ndev; -+ int result = NOT_OK; -+ -+ FN_ENTER; -+ -+ if (ACX_STATUS_4_ASSOCIATED != adev->status) -+ goto drop; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ -+ switch (WF_FC_FROMTODSi & hdr->fc) { -+ case 0: -+ if (adev->mode != ACX_MODE_0_ADHOC) { -+ log(L_DEBUG, "adhoc->adhoc data frame ignored\n"); -+ goto drop; -+ } -+ bssid = hdr->a3; -+ break; -+ case WF_FC_FROMDSi: -+ if (adev->mode != ACX_MODE_2_STA) { -+ log(L_DEBUG, "ap->sta data frame ignored\n"); -+ goto drop; -+ } -+ bssid = hdr->a2; -+ break; -+ case WF_FC_TODSi: -+ log(L_DEBUG, "sta->ap data frame ignored\n"); -+ goto drop; -+ default: /* WF_FC_FROMTODSi: wds->wds */ -+ log(L_DEBUG, "wds data frame ignored (todo)\n"); -+ goto drop; -+ } -+ -+ da = hdr->a1; -+ -+ if (unlikely(acx_debug & L_DEBUG)) { -+ acx_print_mac("rx: da=", da, ""); -+ acx_print_mac(" bssid=", bssid, ""); -+ acx_print_mac(" adev->bssid=", adev->bssid, ""); -+ acx_print_mac(" adev->addr=", adev->dev_addr, "\n"); -+ } -+ -+ /* promiscuous mode --> receive all packets */ -+ if (unlikely(ndev->flags & IFF_PROMISC)) -+ goto process; -+ -+ /* FIRST, check if it is our BSSID */ -+ if (!mac_is_equal(adev->bssid, bssid)) { -+ /* is not our BSSID, so bail out */ -+ goto drop; -+ } -+ -+ /* then, check if it is our address */ -+ if (mac_is_equal(adev->dev_addr, da)) { -+ goto process; -+ } -+ -+ /* then, check if it is broadcast */ -+ if (mac_is_bcast(da)) { -+ goto process; -+ } -+ -+ if (mac_is_mcast(da)) { -+ /* unconditionally receive all multicasts */ -+ if (ndev->flags & IFF_ALLMULTI) -+ goto process; -+ -+ /* FIXME: need to check against the list of -+ * multicast addresses that are configured -+ * for the interface (ifconfig) */ -+ log(L_XFER, "FIXME: multicast packet, need to check " -+ "against a list of multicast addresses " -+ "(to be created!); accepting packet for now\n"); -+ /* for now, just accept it here */ -+ goto process; -+ } -+ -+ log(L_DEBUG, "rx: foreign packet, dropping\n"); -+ goto drop; -+process: -+ /* receive packet */ -+ acx_l_rx(adev, rxbuf); -+ -+ result = OK; -+drop: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_mgmt_frame -+** -+** Theory of operation: mgmt packet gets parsed (to make it easy -+** to access variable-sized IEs), results stored in 'parsed'. -+** Then we react to the packet. -+*/ -+typedef union parsed_mgmt_req { -+ wlan_fr_mgmt_t mgmt; -+ wlan_fr_assocreq_t assocreq; -+ wlan_fr_reassocreq_t reassocreq; -+ wlan_fr_assocresp_t assocresp; -+ wlan_fr_reassocresp_t reassocresp; -+ wlan_fr_beacon_t beacon; -+ wlan_fr_disassoc_t disassoc; -+ wlan_fr_authen_t authen; -+ wlan_fr_deauthen_t deauthen; -+ wlan_fr_proberesp_t proberesp; -+} parsed_mgmt_req_t; -+ -+void BUG_excessive_stack_usage(void); -+ -+static int -+acx_l_process_mgmt_frame(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ parsed_mgmt_req_t parsed; /* takes ~100 bytes of stack */ -+ wlan_hdr_t *hdr; -+ int adhoc, sta_scan, sta, ap; -+ int len; -+ -+ if (sizeof(parsed) > 256) -+ BUG_excessive_stack_usage(); -+ -+ FN_ENTER; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ -+ /* Management frames never have these set */ -+ if (WF_FC_FROMTODSi & hdr->fc) { -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+ } -+ -+ len = RXBUF_BYTES_RCVD(adev, rxbuf); -+ if (WF_FC_ISWEPi & hdr->fc) -+ len -= 0x10; -+ -+ adhoc = (adev->mode == ACX_MODE_0_ADHOC); -+ sta_scan = ((adev->mode == ACX_MODE_2_STA) -+ && (adev->status != ACX_STATUS_4_ASSOCIATED)); -+ sta = ((adev->mode == ACX_MODE_2_STA) -+ && (adev->status == ACX_STATUS_4_ASSOCIATED)); -+ ap = (adev->mode == ACX_MODE_3_AP); -+ -+ switch (WF_FC_FSTYPEi & hdr->fc) { -+ /* beacons first, for speed */ -+ case WF_FSTYPE_BEACONi: -+ memset(&parsed.beacon, 0, sizeof(parsed.beacon)); -+ parsed.beacon.hdr = hdr; -+ parsed.beacon.len = len; -+ if (acx_debug & L_DATA) { -+ printk("beacon len:%d fc:%04X dur:%04X seq:%04X", -+ len, hdr->fc, hdr->dur, hdr->seq); -+ acx_print_mac(" a1:", hdr->a1, ""); -+ acx_print_mac(" a2:", hdr->a2, ""); -+ acx_print_mac(" a3:", hdr->a3, "\n"); -+ } -+ wlan_mgmt_decode_beacon(&parsed.beacon); -+ /* beacon and probe response are very similar, so... */ -+ acx_l_process_probe_response(adev, &parsed.beacon, rxbuf); -+ break; -+ case WF_FSTYPE_ASSOCREQi: -+ if (!ap) -+ break; -+ memset(&parsed.assocreq, 0, sizeof(parsed.assocreq)); -+ parsed.assocreq.hdr = hdr; -+ parsed.assocreq.len = len; -+ wlan_mgmt_decode_assocreq(&parsed.assocreq); -+ if (mac_is_equal(hdr->a1, adev->bssid) -+ && mac_is_equal(hdr->a3, adev->bssid)) { -+ acx_l_transmit_assocresp(adev, &parsed.assocreq); -+ } -+ break; -+ case WF_FSTYPE_REASSOCREQi: -+ if (!ap) -+ break; -+ memset(&parsed.assocreq, 0, sizeof(parsed.assocreq)); -+ parsed.assocreq.hdr = hdr; -+ parsed.assocreq.len = len; -+ wlan_mgmt_decode_assocreq(&parsed.assocreq); -+ /* reassocreq and assocreq are equivalent */ -+ acx_l_transmit_reassocresp(adev, &parsed.reassocreq); -+ break; -+ case WF_FSTYPE_ASSOCRESPi: -+ if (!sta_scan) -+ break; -+ memset(&parsed.assocresp, 0, sizeof(parsed.assocresp)); -+ parsed.assocresp.hdr = hdr; -+ parsed.assocresp.len = len; -+ wlan_mgmt_decode_assocresp(&parsed.assocresp); -+ acx_l_process_assocresp(adev, &parsed.assocresp); -+ break; -+ case WF_FSTYPE_REASSOCRESPi: -+ if (!sta_scan) -+ break; -+ memset(&parsed.assocresp, 0, sizeof(parsed.assocresp)); -+ parsed.assocresp.hdr = hdr; -+ parsed.assocresp.len = len; -+ wlan_mgmt_decode_assocresp(&parsed.assocresp); -+ acx_l_process_reassocresp(adev, &parsed.reassocresp); -+ break; -+ case WF_FSTYPE_PROBEREQi: -+ if (ap || adhoc) { -+ /* FIXME: since we're supposed to be an AP, -+ ** we need to return a Probe Response packet. -+ ** Currently firmware is doing it for us, -+ ** but firmware is buggy! See comment elsewhere --vda */ -+ } -+ break; -+ case WF_FSTYPE_PROBERESPi: -+ memset(&parsed.proberesp, 0, sizeof(parsed.proberesp)); -+ parsed.proberesp.hdr = hdr; -+ parsed.proberesp.len = len; -+ wlan_mgmt_decode_proberesp(&parsed.proberesp); -+ acx_l_process_probe_response(adev, &parsed.proberesp, rxbuf); -+ break; -+ case 6: -+ case 7: -+ /* exit */ -+ break; -+ case WF_FSTYPE_ATIMi: -+ /* exit */ -+ break; -+ case WF_FSTYPE_DISASSOCi: -+ if (!sta && !ap) -+ break; -+ memset(&parsed.disassoc, 0, sizeof(parsed.disassoc)); -+ parsed.disassoc.hdr = hdr; -+ parsed.disassoc.len = len; -+ wlan_mgmt_decode_disassoc(&parsed.disassoc); -+ if (sta) -+ acx_l_process_disassoc_from_ap(adev, &parsed.disassoc); -+ else -+ acx_l_process_disassoc_from_sta(adev, &parsed.disassoc); -+ break; -+ case WF_FSTYPE_AUTHENi: -+ if (!sta_scan && !ap) -+ break; -+ memset(&parsed.authen, 0, sizeof(parsed.authen)); -+ parsed.authen.hdr = hdr; -+ parsed.authen.len = len; -+ wlan_mgmt_decode_authen(&parsed.authen); -+ acx_l_process_authen(adev, &parsed.authen); -+ break; -+ case WF_FSTYPE_DEAUTHENi: -+ if (!sta && !ap) -+ break; -+ memset(&parsed.deauthen, 0, sizeof(parsed.deauthen)); -+ parsed.deauthen.hdr = hdr; -+ parsed.deauthen.len = len; -+ wlan_mgmt_decode_deauthen(&parsed.deauthen); -+ if (sta) -+ acx_l_process_deauth_from_ap(adev, &parsed.deauthen); -+ else -+ acx_l_process_deauth_from_sta(adev, &parsed.deauthen); -+ break; -+ } -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+#ifdef UNUSED -+/*********************************************************************** -+** acx_process_class_frame -+** -+** Called from IRQ context only -+*/ -+static int -+acx_process_class_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala) -+{ -+ return OK; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_l_process_NULL_frame -+*/ -+#ifdef BOGUS_ITS_NOT_A_NULL_FRAME_HANDLER_AT_ALL -+static int -+acx_l_process_NULL_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala) -+{ -+ const signed char *esi; -+ const u8 *ebx; -+ const wlan_hdr_t *hdr; -+ const client_t *client; -+ int result = NOT_OK; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ -+ switch (WF_FC_FROMTODSi & hdr->fc) { -+ case 0: -+ esi = hdr->a1; -+ ebx = hdr->a2; -+ break; -+ case WF_FC_FROMDSi: -+ esi = hdr->a1; -+ ebx = hdr->a3; -+ break; -+ case WF_FC_TODSi: -+ esi = hdr->a1; -+ ebx = hdr->a2; -+ break; -+ default: /* WF_FC_FROMTODSi */ -+ esi = hdr->a1; /* added by me! --vda */ -+ ebx = hdr->a2; -+ } -+ -+ if (esi[0x0] < 0) { -+ result = OK; -+ goto done; -+ } -+ -+ client = acx_l_sta_list_get(adev, ebx); -+ if (client) -+ result = NOT_OK; -+ else { -+#ifdef IS_IT_BROKEN -+ log(L_DEBUG|L_XFER, "\n"); -+ acx_l_transmit_deauthen(adev, ebx, -+ WLAN_MGMT_REASON_CLASS2_NONAUTH); -+#else -+ log(L_DEBUG, "received NULL frame from unknown client! " -+ "We really shouldn't send deauthen here, right?\n"); -+#endif -+ result = OK; -+ } -+done: -+ return result; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_l_process_probe_response -+*/ -+static int -+acx_l_process_probe_response(acx_device_t *adev, wlan_fr_proberesp_t *req, -+ const rxbuffer_t *rxbuf) -+{ -+ struct client *bss; -+ wlan_hdr_t *hdr; -+ -+ FN_ENTER; -+ -+ hdr = req->hdr; -+ -+ if (mac_is_equal(hdr->a3, adev->dev_addr)) { -+ log(L_ASSOC, "huh, scan found our own MAC!?\n"); -+ goto ok; /* just skip this one silently */ -+ } -+ -+ bss = acx_l_sta_list_get_or_add(adev, hdr->a2); -+ -+ /* NB: be careful modifying bss data! It may be one -+ ** of the already known clients (like our AP if we are a STA) -+ ** Thus do not blindly modify e.g. current ratemask! */ -+ -+ if (STA_LIST_ADD_CAN_FAIL && !bss) { -+ /* uh oh, we found more sites/stations than we can handle with -+ * our current setup: pull the emergency brake and stop scanning! */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_STOP_SCAN); -+ /* TODO: a nice comment what below call achieves --vda */ -+ acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH); -+ goto ok; -+ } -+ /* NB: get_or_add already filled bss->address = hdr->a2 */ -+ MAC_COPY(bss->bssid, hdr->a3); -+ -+ /* copy the ESSID element */ -+ if (req->ssid && req->ssid->len <= IW_ESSID_MAX_SIZE) { -+ bss->essid_len = req->ssid->len; -+ memcpy(bss->essid, req->ssid->ssid, req->ssid->len); -+ bss->essid[req->ssid->len] = '\0'; -+ } else { -+ /* Either no ESSID IE or oversized one */ -+ printk("%s: received packet has bogus ESSID\n", -+ adev->ndev->name); -+ } -+ -+ if (req->ds_parms) -+ bss->channel = req->ds_parms->curr_ch; -+ if (req->cap_info) -+ bss->cap_info = ieee2host16(*req->cap_info); -+ -+ bss->sir = acx_signal_to_winlevel(rxbuf->phy_level); -+ bss->snr = acx_signal_to_winlevel(rxbuf->phy_snr); -+ -+ bss->rate_cap = 0; /* operational mask */ -+ bss->rate_bas = 0; /* basic mask */ -+ if (req->supp_rates) -+ add_bits_to_ratemasks(req->supp_rates->rates, -+ req->supp_rates->len, &bss->rate_bas, &bss->rate_cap); -+ if (req->ext_rates) -+ add_bits_to_ratemasks(req->ext_rates->rates, -+ req->ext_rates->len, &bss->rate_bas, &bss->rate_cap); -+ /* Fix up any possible bogosity - code elsewhere -+ * is not expecting empty masks */ -+ if (!bss->rate_cap) -+ bss->rate_cap = adev->rate_basic; -+ if (!bss->rate_bas) -+ bss->rate_bas = 1 << lowest_bit(bss->rate_cap); -+ if (!bss->rate_cur) -+ bss->rate_cur = 1 << lowest_bit(bss->rate_bas); -+ -+ /* People moan about this being too noisy at L_ASSOC */ -+ log(L_DEBUG, -+ "found %s: ESSID=\"%s\" ch=%d " -+ "BSSID="MACSTR" caps=0x%04X SIR=%d SNR=%d\n", -+ (bss->cap_info & WF_MGMT_CAP_IBSS) ? "Ad-Hoc peer" : "AP", -+ bss->essid, bss->channel, MAC(bss->bssid), bss->cap_info, -+ bss->sir, bss->snr); -+ok: -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_assocresp -+*/ -+static int -+acx_l_process_assocresp(acx_device_t *adev, const wlan_fr_assocresp_t *req) -+{ -+ const wlan_hdr_t *hdr; -+ int res = OK; -+ -+ FN_ENTER; -+ -+ hdr = req->hdr; -+ -+ if ((ACX_MODE_2_STA == adev->mode) -+ && mac_is_equal(adev->dev_addr, hdr->a1)) { -+ u16 st = ieee2host16(*(req->status)); -+ if (WLAN_MGMT_STATUS_SUCCESS == st) { -+ adev->aid = ieee2host16(*(req->aid)); -+ /* tell the card we are associated when -+ ** we are out of interrupt context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_ASSOCIATE); -+ } else { -+ -+ /* TODO: we shall delete peer from sta_list, and try -+ ** other candidates... */ -+ -+ printk("%s: association FAILED: peer sent " -+ "Status Code %d (%s)\n", -+ adev->ndev->name, st, get_status_string(st)); -+ res = NOT_OK; -+ } -+ } -+ -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_reassocresp -+*/ -+static int -+acx_l_process_reassocresp(acx_device_t *adev, const wlan_fr_reassocresp_t *req) -+{ -+ const wlan_hdr_t *hdr; -+ int result = NOT_OK; -+ u16 st; -+ -+ FN_ENTER; -+ -+ hdr = req->hdr; -+ -+ if (!mac_is_equal(adev->dev_addr, hdr->a1)) { -+ goto end; -+ } -+ st = ieee2host16(*(req->status)); -+ if (st == WLAN_MGMT_STATUS_SUCCESS) { -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ result = OK; -+ } else { -+ printk("%s: reassociation FAILED: peer sent " -+ "response code %d (%s)\n", -+ adev->ndev->name, st, get_status_string(st)); -+ } -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_authen -+** -+** Called only in STA_SCAN or AP mode -+*/ -+static int -+acx_l_process_authen(acx_device_t *adev, const wlan_fr_authen_t *req) -+{ -+ const wlan_hdr_t *hdr; -+ client_t *clt; -+ wlan_ie_challenge_t *chal; -+ u16 alg, seq, status; -+ int ap, result; -+ -+ FN_ENTER; -+ -+ hdr = req->hdr; -+ -+ if (acx_debug & L_ASSOC) { -+ acx_print_mac("AUTHEN adev->addr=", adev->dev_addr, " "); -+ acx_print_mac("a1=", hdr->a1, " "); -+ acx_print_mac("a2=", hdr->a2, " "); -+ acx_print_mac("a3=", hdr->a3, " "); -+ acx_print_mac("adev->bssid=", adev->bssid, "\n"); -+ } -+ -+ if (!mac_is_equal(adev->dev_addr, hdr->a1) -+ || !mac_is_equal(adev->bssid, hdr->a3)) { -+ result = OK; -+ goto end; -+ } -+ -+ alg = ieee2host16(*(req->auth_alg)); -+ seq = ieee2host16(*(req->auth_seq)); -+ status = ieee2host16(*(req->status)); -+ -+ log(L_ASSOC, "auth algorithm %d, auth sequence %d, status %d\n", alg, seq, status); -+ -+ ap = (adev->mode == ACX_MODE_3_AP); -+ -+ if (adev->auth_alg <= 1) { -+ if (adev->auth_alg != alg) { -+ log(L_ASSOC, "auth algorithm mismatch: " -+ "our:%d peer:%d\n", adev->auth_alg, alg); -+ result = NOT_OK; -+ goto end; -+ } -+ } -+ if (ap) { -+ clt = acx_l_sta_list_get_or_add(adev, hdr->a2); -+ if (STA_LIST_ADD_CAN_FAIL && !clt) { -+ log(L_ASSOC, "could not allocate room for client\n"); -+ result = NOT_OK; -+ goto end; -+ } -+ } else { -+ clt = adev->ap_client; -+ if (!mac_is_equal(clt->address, hdr->a2)) { -+ printk("%s: malformed auth frame from AP?!\n", -+ adev->ndev->name); -+ result = NOT_OK; -+ goto end; -+ } -+ } -+ -+ /* now check which step in the authentication sequence we are -+ * currently in, and act accordingly */ -+ switch (seq) { -+ case 1: -+ if (!ap) -+ break; -+ acx_l_transmit_authen2(adev, req, clt); -+ break; -+ case 2: -+ if (ap) -+ break; -+ if (status == WLAN_MGMT_STATUS_SUCCESS) { -+ if (alg == WLAN_AUTH_ALG_OPENSYSTEM) { -+ acx_set_status(adev, ACX_STATUS_3_AUTHENTICATED); -+ acx_l_transmit_assoc_req(adev); -+ } else -+ if (alg == WLAN_AUTH_ALG_SHAREDKEY) { -+ acx_l_transmit_authen3(adev, req); -+ } -+ } else { -+ printk("%s: auth FAILED: peer sent " -+ "response code %d (%s), " -+ "still waiting for authentication\n", -+ adev->ndev->name, -+ status, get_status_string(status)); -+ acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH); -+ } -+ break; -+ case 3: -+ if (!ap) -+ break; -+ if ((clt->auth_alg != WLAN_AUTH_ALG_SHAREDKEY) -+ || (alg != WLAN_AUTH_ALG_SHAREDKEY) -+ || (clt->auth_step != 2)) -+ break; -+ chal = req->challenge; -+ if (!chal -+ || memcmp(chal->challenge, clt->challenge_text, WLAN_CHALLENGE_LEN) -+ || (chal->eid != WLAN_EID_CHALLENGE) -+ || (chal->len != WLAN_CHALLENGE_LEN) -+ ) -+ break; -+ acx_l_transmit_authen4(adev, req); -+ MAC_COPY(clt->address, hdr->a2); -+ clt->used = CLIENT_AUTHENTICATED_2; -+ clt->auth_step = 4; -+ clt->seq = ieee2host16(hdr->seq); -+ break; -+ case 4: -+ if (ap) -+ break; -+ /* ok, we're through: we're authenticated. Woohoo!! */ -+ acx_set_status(adev, ACX_STATUS_3_AUTHENTICATED); -+ log(L_ASSOC, "Authenticated!\n"); -+ /* now that we're authenticated, request association */ -+ acx_l_transmit_assoc_req(adev); -+ break; -+ } -+ result = OK; -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_gen_challenge -+*/ -+static inline void -+acx_gen_challenge(wlan_ie_challenge_t* d) -+{ -+ FN_ENTER; -+ d->eid = WLAN_EID_CHALLENGE; -+ d->len = WLAN_CHALLENGE_LEN; -+ get_random_bytes(d->challenge, WLAN_CHALLENGE_LEN); -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_deauthen -+*/ -+static int -+acx_l_transmit_deauthen(acx_device_t *adev, const u8 *addr, u16 reason) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct deauthen_frame_body *body; -+ -+ FN_ENTER; -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = (WF_FTYPE_MGMTi | WF_FSTYPE_DEAUTHENi); -+ head->dur = 0; -+ MAC_COPY(head->da, addr); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, adev->bssid); -+ head->seq = 0; -+ -+ log(L_DEBUG|L_ASSOC|L_XFER, -+ "sending deauthen to "MACSTR" for %d\n", -+ MAC(addr), reason); -+ -+ body->reason = host2ieee16(reason); -+ -+ /* body is fixed size here, but beware of cutting-and-pasting this - -+ ** do not use sizeof(*body) for variable sized mgmt packets! */ -+ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + sizeof(*body)); -+ -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_authen1 -+*/ -+static int -+acx_l_transmit_authen1(acx_device_t *adev) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct auth_frame_body *body; -+ -+ FN_ENTER; -+ -+ log(L_ASSOC, "sending authentication1 request (auth algo %d), " -+ "awaiting response\n", adev->auth_alg); -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_AUTHENi; -+ /* duration should be 0 instead of 0x8000 to have -+ * the firmware calculate the value, right? */ -+ head->dur = 0; -+ MAC_COPY(head->da, adev->bssid); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, adev->bssid); -+ head->seq = 0; -+ -+ body->auth_alg = host2ieee16(adev->auth_alg); -+ body->auth_seq = host2ieee16(1); -+ body->status = host2ieee16(0); -+ -+ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + 2 + 2 + 2); -+ -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_authen2 -+*/ -+static int -+acx_l_transmit_authen2(acx_device_t *adev, const wlan_fr_authen_t *req, -+ client_t *clt) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct auth_frame_body *body; -+ unsigned int packet_len; -+ -+ FN_ENTER; -+ -+ if (!clt) -+ goto ok; -+ -+ MAC_COPY(clt->address, req->hdr->a2); -+#ifdef UNUSED -+ clt->ps = ((WF_FC_PWRMGTi & req->hdr->fc) != 0); -+#endif -+ clt->auth_alg = ieee2host16(*(req->auth_alg)); -+ clt->auth_step = 2; -+ clt->seq = ieee2host16(req->hdr->seq); -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_AUTHENi; -+ head->dur = 0 /* req->hdr->dur */; -+ MAC_COPY(head->da, req->hdr->a2); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, req->hdr->a3); -+ head->seq = 0 /* req->hdr->seq */; -+ -+ /* already in IEEE format, no endianness conversion */ -+ body->auth_alg = *(req->auth_alg); -+ body->auth_seq = host2ieee16(2); -+ body->status = host2ieee16(0); -+ -+ packet_len = WLAN_HDR_A3_LEN + 2 + 2 + 2; -+ if (ieee2host16(*(req->auth_alg)) == WLAN_AUTH_ALG_OPENSYSTEM) { -+ clt->used = CLIENT_AUTHENTICATED_2; -+ } else { /* shared key */ -+ acx_gen_challenge(&body->challenge); -+ memcpy(&clt->challenge_text, body->challenge.challenge, WLAN_CHALLENGE_LEN); -+ packet_len += 2 + 2 + 2 + 1+1+WLAN_CHALLENGE_LEN; -+ } -+ -+ acxlog_mac(L_ASSOC|L_XFER, -+ "transmit_auth2: BSSID=", head->bssid, "\n"); -+ -+ acx_l_tx_data(adev, tx, packet_len); -+ok: -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_authen3 -+*/ -+static int -+acx_l_transmit_authen3(acx_device_t *adev, const wlan_fr_authen_t *req) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct auth_frame_body *body; -+ unsigned int packet_len; -+ -+ FN_ENTER; -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto ok; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto ok; -+ } -+ body = (void*)(head + 1); -+ -+ /* add WF_FC_ISWEPi: auth step 3 needs to be encrypted */ -+ head->fc = WF_FC_ISWEPi + WF_FSTYPE_AUTHENi; -+ /* FIXME: is this needed?? authen4 does it... -+ * I think it's even wrong since we shouldn't re-use old -+ * values but instead let the firmware calculate proper ones -+ head->dur = req->hdr->dur; -+ head->seq = req->hdr->seq; -+ */ -+ MAC_COPY(head->da, adev->bssid); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, adev->bssid); -+ -+ /* already in IEEE format, no endianness conversion */ -+ body->auth_alg = *(req->auth_alg); -+ body->auth_seq = host2ieee16(3); -+ body->status = host2ieee16(0); -+ memcpy(&body->challenge, req->challenge, req->challenge->len + 2); -+ packet_len = WLAN_HDR_A3_LEN + 8 + req->challenge->len; -+ -+ log(L_ASSOC|L_XFER, "transmit_authen3!\n"); -+ -+ acx_l_tx_data(adev, tx, packet_len); -+ok: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_authen4 -+*/ -+static int -+acx_l_transmit_authen4(acx_device_t *adev, const wlan_fr_authen_t *req) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct auth_frame_body *body; -+ -+ FN_ENTER; -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto ok; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto ok; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_AUTHENi; /* 0xb0 */ -+ head->dur = 0 /* req->hdr->dur */; -+ MAC_COPY(head->da, req->hdr->a2); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, req->hdr->a3); -+ head->seq = 0 /* req->hdr->seq */; -+ -+ /* already in IEEE format, no endianness conversion */ -+ body->auth_alg = *(req->auth_alg); -+ body->auth_seq = host2ieee16(4); -+ body->status = host2ieee16(0); -+ -+ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + 2 + 2 + 2); -+ok: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_assoc_req -+** -+** adev->ap_client is a current candidate AP here -+*/ -+static int -+acx_l_transmit_assoc_req(acx_device_t *adev) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ u8 *body, *p, *prate; -+ unsigned int packet_len; -+ u16 cap; -+ -+ FN_ENTER; -+ -+ log(L_ASSOC, "sending association request, " -+ "awaiting response. NOT ASSOCIATED YET\n"); -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_ASSOCREQi; -+ head->dur = host2ieee16(0x8000); -+ MAC_COPY(head->da, adev->bssid); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, adev->bssid); -+ head->seq = 0; -+ -+ p = body; -+ /* now start filling the AssocReq frame body */ -+ -+ /* since this assoc request will most likely only get -+ * sent in the STA to AP case (and not when Ad-Hoc IBSS), -+ * the cap combination indicated here will thus be -+ * WF_MGMT_CAP_ESSi *always* (no IBSS ever) -+ * The specs are more than non-obvious on all that: -+ * -+ * 802.11 7.3.1.4 Capability Information field -+ ** APs set the ESS subfield to 1 and the IBSS subfield to 0 within -+ ** Beacon or Probe Response management frames. STAs within an IBSS -+ ** set the ESS subfield to 0 and the IBSS subfield to 1 in transmitted -+ ** Beacon or Probe Response management frames -+ ** -+ ** APs set the Privacy subfield to 1 within transmitted Beacon, -+ ** Probe Response, Association Response, and Reassociation Response -+ ** if WEP is required for all data type frames within the BSS. -+ ** STAs within an IBSS set the Privacy subfield to 1 in Beacon -+ ** or Probe Response management frames if WEP is required -+ ** for all data type frames within the IBSS */ -+ -+ /* note that returning 0 will be refused by several APs... -+ * (so this indicates that you're probably supposed to -+ * "confirm" the ESS mode) */ -+ cap = WF_MGMT_CAP_ESSi; -+ -+ /* this one used to be a check on wep_restricted, -+ * but more likely it's wep_enabled instead */ -+ if (adev->wep_enabled) -+ SET_BIT(cap, WF_MGMT_CAP_PRIVACYi); -+ -+ /* Probably we can just set these always, because our hw is -+ ** capable of shortpre and PBCC --vda */ -+ /* only ask for short preamble if the peer station supports it */ -+ if (adev->ap_client->cap_info & WF_MGMT_CAP_SHORT) -+ SET_BIT(cap, WF_MGMT_CAP_SHORTi); -+ /* only ask for PBCC support if the peer station supports it */ -+ if (adev->ap_client->cap_info & WF_MGMT_CAP_PBCC) -+ SET_BIT(cap, WF_MGMT_CAP_PBCCi); -+ -+ /* IEs: 1. caps */ -+ *(u16*)p = cap; p += 2; -+ /* 2. listen interval */ -+ *(u16*)p = host2ieee16(adev->listen_interval); p += 2; -+ /* 3. ESSID */ -+ p = wlan_fill_ie_ssid(p, -+ strlen(adev->essid_for_assoc), adev->essid_for_assoc); -+ /* 4. supp rates */ -+ prate = p; -+ p = wlan_fill_ie_rates(p, -+ adev->rate_supported_len, adev->rate_supported); -+ /* 5. ext supp rates */ -+ p = wlan_fill_ie_rates_ext(p, -+ adev->rate_supported_len, adev->rate_supported); -+ -+ if (acx_debug & L_DEBUG) { -+ printk("association: rates element\n"); -+ acx_dump_bytes(prate, p - prate); -+ } -+ -+ /* calculate lengths */ -+ packet_len = WLAN_HDR_A3_LEN + (p - body); -+ -+ log(L_ASSOC, "association: requesting caps 0x%04X, ESSID \"%s\"\n", -+ cap, adev->essid_for_assoc); -+ -+ acx_l_tx_data(adev, tx, packet_len); -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_disassoc -+** -+** FIXME: looks like incomplete implementation of a helper: -+** acx_l_transmit_disassoc(adev, clt) - kick this client (we're an AP) -+** acx_l_transmit_disassoc(adev, NULL) - leave BSSID (we're a STA) -+*/ -+#ifdef BROKEN -+int -+acx_l_transmit_disassoc(acx_device_t *adev, client_t *clt) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct disassoc_frame_body *body; -+ -+ FN_ENTER; -+/* if (clt != NULL) { */ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+/* clt->used = CLIENT_AUTHENTICATED_2; - not (yet?) associated */ -+ -+ head->fc = WF_FSTYPE_DISASSOCi; -+ head->dur = 0; -+ /* huh? It muchly depends on whether we're STA or AP... -+ ** sta->ap: da=bssid, sa=own, bssid=bssid -+ ** ap->sta: da=sta, sa=bssid, bssid=bssid. FIXME! */ -+ MAC_COPY(head->da, adev->bssid); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, adev->dev_addr); -+ head->seq = 0; -+ -+ /* "Class 3 frame received from nonassociated station." */ -+ body->reason = host2ieee16(7); -+ -+ /* fixed size struct, ok to sizeof */ -+ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + sizeof(*body)); -+/* } */ -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_s_complete_scan -+** -+** Called either from after_interrupt_task() if: -+** 1) there was Scan_Complete IRQ, or -+** 2) scanning expired in timer() -+** We need to decide which ESS or IBSS to join. -+** Iterates thru adev->sta_list: -+** if adev->ap is not bcast, will join only specified -+** ESS or IBSS with this bssid -+** checks peers' caps for ESS/IBSS bit -+** checks peers' SSID, allows exact match or hidden SSID -+** If station to join is chosen: -+** points adev->ap_client to the chosen struct client -+** sets adev->essid_for_assoc for future assoc attempt -+** Auth/assoc is not yet performed -+** Returns OK if there is no need to restart scan -+*/ -+int -+acx_s_complete_scan(acx_device_t *adev) -+{ -+ struct client *bss; -+ unsigned long flags; -+ u16 needed_cap; -+ int i; -+ int idx_found = -1; -+ int result = OK; -+ -+ FN_ENTER; -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ needed_cap = WF_MGMT_CAP_IBSS; /* 2, we require Ad-Hoc */ -+ break; -+ case ACX_MODE_2_STA: -+ needed_cap = WF_MGMT_CAP_ESS; /* 1, we require Managed */ -+ break; -+ default: -+ printk("acx: driver bug: mode=%d in complete_scan()\n", adev->mode); -+ dump_stack(); -+ goto end; -+ } -+ -+ acx_lock(adev, flags); -+ -+ /* TODO: sta_iterator hiding implementation would be nice here... */ -+ -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ bss = &adev->sta_list[i]; -+ if (!bss->used) continue; -+ -+ -+ log(L_ASSOC, "scan table: SSID=\"%s\" CH=%d SIR=%d SNR=%d\n", -+ bss->essid, bss->channel, bss->sir, bss->snr); -+ -+ if (!mac_is_bcast(adev->ap)) -+ if (!mac_is_equal(bss->bssid, adev->ap)) -+ continue; /* keep looking */ -+ -+ /* broken peer with no mode flags set? */ -+ if (unlikely(!(bss->cap_info & (WF_MGMT_CAP_ESS | WF_MGMT_CAP_IBSS)))) { -+ printk("%s: strange peer "MACSTR" found with " -+ "neither ESS (AP) nor IBSS (Ad-Hoc) " -+ "capability - skipped\n", -+ adev->ndev->name, MAC(bss->address)); -+ continue; -+ } -+ log(L_ASSOC, "peer_cap 0x%04X, needed_cap 0x%04X\n", -+ bss->cap_info, needed_cap); -+ -+ /* does peer station support what we need? */ -+ if ((bss->cap_info & needed_cap) != needed_cap) -+ continue; /* keep looking */ -+ -+ /* strange peer with NO basic rates?! */ -+ if (unlikely(!bss->rate_bas)) { -+ printk("%s: strange peer "MACSTR" with empty rate set " -+ "- skipped\n", -+ adev->ndev->name, MAC(bss->address)); -+ continue; -+ } -+ -+ /* do we support all basic rates of this peer? */ -+ if ((bss->rate_bas & adev->rate_oper) != bss->rate_bas) { -+/* we probably need to have all rates as operational rates, -+ even in case of an 11M-only configuration */ -+#ifdef THIS_IS_TROUBLESOME -+ printk("%s: peer "MACSTR": incompatible basic rates " -+ "(AP requests 0x%04X, we have 0x%04X) " -+ "- skipped\n", -+ adev->ndev->name, MAC(bss->address), -+ bss->rate_bas, adev->rate_oper); -+ continue; -+#else -+ printk("%s: peer "MACSTR": incompatible basic rates " -+ "(AP requests 0x%04X, we have 0x%04X). " -+ "Considering anyway...\n", -+ adev->ndev->name, MAC(bss->address), -+ bss->rate_bas, adev->rate_oper); -+#endif -+ } -+ -+ if ( !(adev->reg_dom_chanmask & (1<<(bss->channel-1))) ) { -+ printk("%s: warning: peer "MACSTR" is on channel %d " -+ "outside of channel range of current " -+ "regulatory domain - couldn't join " -+ "even if other settings match. " -+ "You might want to adapt your config\n", -+ adev->ndev->name, MAC(bss->address), -+ bss->channel); -+ continue; /* keep looking */ -+ } -+ -+ if (!adev->essid_active || !strcmp(bss->essid, adev->essid)) { -+ log(L_ASSOC, -+ "found station with matching ESSID! ('%s' " -+ "station, '%s' config)\n", -+ bss->essid, -+ (adev->essid_active) ? adev->essid : "[any]"); -+ /* TODO: continue looking for peer with better SNR */ -+ bss->used = CLIENT_JOIN_CANDIDATE; -+ idx_found = i; -+ -+ /* stop searching if this station is -+ * on the current channel, otherwise -+ * keep looking for an even better match */ -+ if (bss->channel == adev->channel) -+ break; -+ } else -+ if (is_hidden_essid(bss->essid)) { -+ /* hmm, station with empty or single-space SSID: -+ * using hidden SSID broadcast? -+ */ -+ /* This behaviour is broken: which AP from zillion -+ ** of APs with hidden SSID you'd try? -+ ** We should use Probe requests to get Probe responses -+ ** and check for real SSID (are those never hidden?) */ -+ bss->used = CLIENT_JOIN_CANDIDATE; -+ if (idx_found == -1) -+ idx_found = i; -+ log(L_ASSOC, "found station with empty or " -+ "single-space (hidden) SSID, considering " -+ "for assoc attempt\n"); -+ /* ...and keep looking for better matches */ -+ } else { -+ log(L_ASSOC, "ESSID doesn't match! ('%s' " -+ "station, '%s' config)\n", -+ bss->essid, -+ (adev->essid_active) ? adev->essid : "[any]"); -+ } -+ } -+ -+ /* TODO: iterate thru join candidates instead */ -+ /* TODO: rescan if not associated within some timeout */ -+ if (idx_found != -1) { -+ char *essid_src; -+ size_t essid_len; -+ -+ bss = &adev->sta_list[idx_found]; -+ adev->ap_client = bss; -+ -+ if (is_hidden_essid(bss->essid)) { -+ /* if the ESSID of the station we found is empty -+ * (no broadcast), then use user-configured ESSID -+ * instead */ -+ essid_src = adev->essid; -+ essid_len = adev->essid_len; -+ } else { -+ essid_src = bss->essid; -+ essid_len = strlen(bss->essid); -+ } -+ -+ acx_update_capabilities(adev); -+ -+ memcpy(adev->essid_for_assoc, essid_src, essid_len); -+ adev->essid_for_assoc[essid_len] = '\0'; -+ adev->channel = bss->channel; -+ MAC_COPY(adev->bssid, bss->bssid); -+ -+ bss->rate_cfg = (bss->rate_cap & adev->rate_oper); -+ bss->rate_cur = 1 << lowest_bit(bss->rate_cfg); -+ bss->rate_100 = acx_rate111to100(bss->rate_cur); -+ -+ acxlog_mac(L_ASSOC, -+ "matching station found: ", adev->bssid, ", joining\n"); -+ -+ /* TODO: do we need to switch to the peer's channel first? */ -+ -+ if (ACX_MODE_0_ADHOC == adev->mode) { -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ } else { -+ acx_l_transmit_authen1(adev); -+ acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH); -+ } -+ } else { /* idx_found == -1 */ -+ /* uh oh, no station found in range */ -+ if (ACX_MODE_0_ADHOC == adev->mode) { -+ printk("%s: no matching station found in range, " -+ "generating our own IBSS instead\n", -+ adev->ndev->name); -+ /* we do it the HostAP way: */ -+ MAC_COPY(adev->bssid, adev->dev_addr); -+ adev->bssid[0] |= 0x02; /* 'local assigned addr' bit */ -+ /* add IBSS bit to our caps... */ -+ acx_update_capabilities(adev); -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ /* In order to cmd_join be called below */ -+ idx_found = 0; -+ } else { -+ /* we shall scan again, AP can be -+ ** just temporarily powered off */ -+ log(L_ASSOC, -+ "no matching station found in range yet\n"); -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); -+ result = NOT_OK; -+ } -+ } -+ -+ acx_unlock(adev, flags); -+ -+ if (idx_found != -1) { -+ if (ACX_MODE_0_ADHOC == adev->mode) { -+ /* need to update channel in beacon template */ -+ SET_BIT(adev->set_mask, SET_TEMPLATES); -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) -+ acx_s_update_card_settings(adev); -+ } -+ /* Inform firmware on our decision to start or join BSS */ -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ } -+ -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_s_read_fw -+** -+** Loads a firmware image -+** -+** Returns: -+** 0 unable to load file -+** pointer to firmware success -+*/ -+firmware_image_t* -+acx_s_read_fw(struct device *dev, const char *file, u32 *size) -+{ -+ firmware_image_t *res; -+ const struct firmware *fw_entry; -+ -+ res = NULL; -+ log(L_INIT, "requesting firmware image '%s'\n", file); -+ if (!request_firmware(&fw_entry, file, dev)) { -+ *size = 8; -+ if (fw_entry->size >= 8) -+ *size = 8 + le32_to_cpu(*(u32 *)(fw_entry->data + 4)); -+ if (fw_entry->size != *size) { -+ printk("acx: firmware size does not match " -+ "firmware header: %d != %d, " -+ "aborting fw upload\n", -+ (int) fw_entry->size, (int) *size); -+ goto release_ret; -+ } -+ res = vmalloc(*size); -+ if (!res) { -+ printk("acx: no memory for firmware " -+ "(%u bytes)\n", *size); -+ goto release_ret; -+ } -+ memcpy(res, fw_entry->data, fw_entry->size); -+release_ret: -+ release_firmware(fw_entry); -+ return res; -+ } -+ printk("acx: firmware image '%s' was not provided. " -+ "Check your hotplug scripts\n", file); -+ -+ /* checksum will be verified in write_fw, so don't bother here */ -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acx_s_set_wepkey -+*/ -+static void -+acx100_s_set_wepkey(acx_device_t *adev) -+{ -+ ie_dot11WEPDefaultKey_t dk; -+ int i; -+ -+ for (i = 0; i < DOT11_MAX_DEFAULT_WEP_KEYS; i++) { -+ if (adev->wep_keys[i].size != 0) { -+ log(L_INIT, "setting WEP key: %d with " -+ "total size: %d\n", i, (int) adev->wep_keys[i].size); -+ dk.action = 1; -+ dk.keySize = adev->wep_keys[i].size; -+ dk.defaultKeyNum = i; -+ memcpy(dk.key, adev->wep_keys[i].key, dk.keySize); -+ acx_s_configure(adev, &dk, ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE); -+ } -+ } -+} -+ -+static void -+acx111_s_set_wepkey(acx_device_t *adev) -+{ -+ acx111WEPDefaultKey_t dk; -+ int i; -+ -+ for (i = 0; i < DOT11_MAX_DEFAULT_WEP_KEYS; i++) { -+ if (adev->wep_keys[i].size != 0) { -+ log(L_INIT, "setting WEP key: %d with " -+ "total size: %d\n", i, (int) adev->wep_keys[i].size); -+ memset(&dk, 0, sizeof(dk)); -+ dk.action = cpu_to_le16(1); /* "add key"; yes, that's a 16bit value */ -+ dk.keySize = adev->wep_keys[i].size; -+ -+ /* are these two lines necessary? */ -+ dk.type = 0; /* default WEP key */ -+ dk.index = 0; /* ignored when setting default key */ -+ -+ dk.defaultKeyNum = i; -+ memcpy(dk.key, adev->wep_keys[i].key, dk.keySize); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WEP_MGMT, &dk, sizeof(dk)); -+ } -+ } -+} -+ -+static void -+acx_s_set_wepkey(acx_device_t *adev) -+{ -+ if (IS_ACX111(adev)) -+ acx111_s_set_wepkey(adev); -+ else -+ acx100_s_set_wepkey(adev); -+} -+ -+ -+/*********************************************************************** -+** acx100_s_init_wep -+** -+** FIXME: this should probably be moved into the new card settings -+** management, but since we're also modifying the memory map layout here -+** due to the WEP key space we want, we should take care... -+*/ -+static int -+acx100_s_init_wep(acx_device_t *adev) -+{ -+ acx100_ie_wep_options_t options; -+ ie_dot11WEPDefaultKeyID_t dk; -+ acx_ie_memmap_t pt; -+ int res = NOT_OK; -+ -+ FN_ENTER; -+ -+ if (OK != acx_s_interrogate(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { -+ goto fail; -+ } -+ -+ log(L_DEBUG, "CodeEnd:%X\n", pt.CodeEnd); -+ -+ pt.WEPCacheStart = cpu_to_le32(le32_to_cpu(pt.CodeEnd) + 0x4); -+ pt.WEPCacheEnd = cpu_to_le32(le32_to_cpu(pt.CodeEnd) + 0x4); -+ -+ if (OK != acx_s_configure(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { -+ goto fail; -+ } -+ -+ /* let's choose maximum setting: 4 default keys, plus 10 other keys: */ -+ options.NumKeys = cpu_to_le16(DOT11_MAX_DEFAULT_WEP_KEYS + 10); -+ options.WEPOption = 0x00; -+ -+ log(L_ASSOC, "%s: writing WEP options\n", __func__); -+ acx_s_configure(adev, &options, ACX100_IE_WEP_OPTIONS); -+ -+ acx100_s_set_wepkey(adev); -+ -+ if (adev->wep_keys[adev->wep_current_index].size != 0) { -+ log(L_ASSOC, "setting active default WEP key number: %d\n", -+ adev->wep_current_index); -+ dk.KeyID = adev->wep_current_index; -+ acx_s_configure(adev, &dk, ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET); /* 0x1010 */ -+ } -+ /* FIXME!!! wep_key_struct is filled nowhere! But adev -+ * is initialized to 0, and we don't REALLY need those keys either */ -+/* for (i = 0; i < 10; i++) { -+ if (adev->wep_key_struct[i].len != 0) { -+ MAC_COPY(wep_mgmt.MacAddr, adev->wep_key_struct[i].addr); -+ wep_mgmt.KeySize = cpu_to_le16(adev->wep_key_struct[i].len); -+ memcpy(&wep_mgmt.Key, adev->wep_key_struct[i].key, le16_to_cpu(wep_mgmt.KeySize)); -+ wep_mgmt.Action = cpu_to_le16(1); -+ log(L_ASSOC, "writing WEP key %d (len %d)\n", i, le16_to_cpu(wep_mgmt.KeySize)); -+ if (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_WEP_MGMT, &wep_mgmt, sizeof(wep_mgmt))) { -+ adev->wep_key_struct[i].index = i; -+ } -+ } -+ } -+*/ -+ -+ /* now retrieve the updated WEPCacheEnd pointer... */ -+ if (OK != acx_s_interrogate(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { -+ printk("%s: ACX1xx_IE_MEMORY_MAP read #2 FAILED\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ /* ...and tell it to start allocating templates at that location */ -+ /* (no endianness conversion needed) */ -+ pt.PacketTemplateStart = pt.WEPCacheEnd; -+ -+ if (OK != acx_s_configure(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { -+ printk("%s: ACX1xx_IE_MEMORY_MAP write #2 FAILED\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ res = OK; -+ -+fail: -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+static int -+acx_s_init_max_template_generic(acx_device_t *adev, unsigned int len, unsigned int cmd) -+{ -+ int res; -+ union { -+ acx_template_nullframe_t null; -+ acx_template_beacon_t b; -+ acx_template_tim_t tim; -+ acx_template_probereq_t preq; -+ acx_template_proberesp_t presp; -+ } templ; -+ -+ memset(&templ, 0, len); -+ templ.null.size = cpu_to_le16(len - 2); -+ res = acx_s_issue_cmd(adev, cmd, &templ, len); -+ return res; -+} -+ -+static inline int -+acx_s_init_max_null_data_template(acx_device_t *adev) -+{ -+ return acx_s_init_max_template_generic( -+ adev, sizeof(acx_template_nullframe_t), ACX1xx_CMD_CONFIG_NULL_DATA -+ ); -+} -+ -+static inline int -+acx_s_init_max_beacon_template(acx_device_t *adev) -+{ -+ return acx_s_init_max_template_generic( -+ adev, sizeof(acx_template_beacon_t), ACX1xx_CMD_CONFIG_BEACON -+ ); -+} -+ -+static inline int -+acx_s_init_max_tim_template(acx_device_t *adev) -+{ -+ return acx_s_init_max_template_generic( -+ adev, sizeof(acx_template_tim_t), ACX1xx_CMD_CONFIG_TIM -+ ); -+} -+ -+static inline int -+acx_s_init_max_probe_response_template(acx_device_t *adev) -+{ -+ return acx_s_init_max_template_generic( -+ adev, sizeof(acx_template_proberesp_t), ACX1xx_CMD_CONFIG_PROBE_RESPONSE -+ ); -+} -+ -+static inline int -+acx_s_init_max_probe_request_template(acx_device_t *adev) -+{ -+ return acx_s_init_max_template_generic( -+ adev, sizeof(acx_template_probereq_t), ACX1xx_CMD_CONFIG_PROBE_REQUEST -+ ); -+} -+ -+/*********************************************************************** -+** acx_s_set_tim_template -+** -+** FIXME: In full blown driver we will regularly update partial virtual bitmap -+** by calling this function -+** (it can be done by irq handler on each DTIM irq or by timer...) -+ -+[802.11 7.3.2.6] TIM information element: -+- 1 EID -+- 1 Length -+1 1 DTIM Count -+ indicates how many beacons (including this) appear before next DTIM -+ (0=this one is a DTIM) -+2 1 DTIM Period -+ number of beacons between successive DTIMs -+ (0=reserved, 1=all TIMs are DTIMs, 2=every other, etc) -+3 1 Bitmap Control -+ bit0: Traffic Indicator bit associated with Assoc ID 0 (Bcast AID?) -+ set to 1 in TIM elements with a value of 0 in the DTIM Count field -+ when one or more broadcast or multicast frames are buffered at the AP. -+ bit1-7: Bitmap Offset (logically Bitmap_Offset = Bitmap_Control & 0xFE). -+4 n Partial Virtual Bitmap -+ Visible part of traffic-indication bitmap. -+ Full bitmap consists of 2008 bits (251 octets) such that bit number N -+ (0<=N<=2007) in the bitmap corresponds to bit number (N mod 8) -+ in octet number N/8 where the low-order bit of each octet is bit0, -+ and the high order bit is bit7. -+ Each set bit in virtual bitmap corresponds to traffic buffered by AP -+ for a specific station (with corresponding AID?). -+ Partial Virtual Bitmap shows a part of bitmap which has non-zero. -+ Bitmap Offset is a number of skipped zero octets (see above). -+ 'Missing' octets at the tail are also assumed to be zero. -+ Example: Length=6, Bitmap_Offset=2, Partial_Virtual_Bitmap=55 55 55 -+ This means that traffic-indication bitmap is: -+ 00000000 00000000 01010101 01010101 01010101 00000000 00000000... -+ (is bit0 in the map is always 0 and real value is in Bitmap Control bit0?) -+*/ -+static int -+acx_s_set_tim_template(acx_device_t *adev) -+{ -+/* For now, configure smallish test bitmap, all zero ("no pending data") */ -+ enum { bitmap_size = 5 }; -+ -+ acx_template_tim_t t; -+ int result; -+ -+ FN_ENTER; -+ -+ memset(&t, 0, sizeof(t)); -+ t.size = 5 + bitmap_size; /* eid+len+count+period+bmap_ctrl + bmap */ -+ t.tim_eid = WLAN_EID_TIM; -+ t.len = 3 + bitmap_size; /* count+period+bmap_ctrl + bmap */ -+ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_TIM, &t, sizeof(t)); -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_fill_beacon_or_proberesp_template -+** -+** For frame format info, please see 802.11-1999.pdf item 7.2.3.9 and below!! -+** -+** NB: we use the fact that -+** struct acx_template_proberesp and struct acx_template_beacon are the same -+** (well, almost...) -+** -+** [802.11] Beacon's body consist of these IEs: -+** 1 Timestamp -+** 2 Beacon interval -+** 3 Capability information -+** 4 SSID -+** 5 Supported rates (up to 8 rates) -+** 6 FH Parameter Set (frequency-hopping PHYs only) -+** 7 DS Parameter Set (direct sequence PHYs only) -+** 8 CF Parameter Set (only if PCF is supported) -+** 9 IBSS Parameter Set (ad-hoc only) -+** -+** Beacon only: -+** 10 TIM (AP only) (see 802.11 7.3.2.6) -+** 11 Country Information (802.11d) -+** 12 FH Parameters (802.11d) -+** 13 FH Pattern Table (802.11d) -+** ... (?!! did not yet find relevant PDF file... --vda) -+** 19 ERP Information (extended rate PHYs) -+** 20 Extended Supported Rates (if more than 8 rates) -+** -+** Proberesp only: -+** 10 Country information (802.11d) -+** 11 FH Parameters (802.11d) -+** 12 FH Pattern Table (802.11d) -+** 13-n Requested information elements (802.11d) -+** ???? -+** 18 ERP Information (extended rate PHYs) -+** 19 Extended Supported Rates (if more than 8 rates) -+*/ -+static int -+acx_fill_beacon_or_proberesp_template(acx_device_t *adev, -+ struct acx_template_beacon *templ, -+ u16 fc /* in host order! */) -+{ -+ int len; -+ u8 *p; -+ -+ FN_ENTER; -+ -+ memset(templ, 0, sizeof(*templ)); -+ MAC_BCAST(templ->da); -+ MAC_COPY(templ->sa, adev->dev_addr); -+ MAC_COPY(templ->bssid, adev->bssid); -+ -+ templ->beacon_interval = cpu_to_le16(adev->beacon_interval); -+ acx_update_capabilities(adev); -+ templ->cap = cpu_to_le16(adev->capabilities); -+ -+ p = templ->variable; -+ p = wlan_fill_ie_ssid(p, adev->essid_len, adev->essid); -+ p = wlan_fill_ie_rates(p, adev->rate_supported_len, adev->rate_supported); -+ p = wlan_fill_ie_ds_parms(p, adev->channel); -+ /* NB: should go AFTER tim, but acx seem to keep tim last always */ -+ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, adev->rate_supported); -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ /* ATIM window */ -+ p = wlan_fill_ie_ibss_parms(p, 0); break; -+ case ACX_MODE_3_AP: -+ /* TIM IE is set up as separate template */ -+ break; -+ } -+ -+ len = p - (u8*)templ; -+ templ->fc = cpu_to_le16(WF_FTYPE_MGMT | fc); -+ /* - 2: do not count 'u16 size' field */ -+ templ->size = cpu_to_le16(len - 2); -+ -+ FN_EXIT1(len); -+ return len; -+} -+ -+ -+#if POWER_SAVE_80211 -+/*********************************************************************** -+** acx_s_set_null_data_template -+*/ -+static int -+acx_s_set_null_data_template(acx_device_t *adev) -+{ -+ struct acx_template_nullframe b; -+ int result; -+ -+ FN_ENTER; -+ -+ /* memset(&b, 0, sizeof(b)); not needed, setting all members */ -+ -+ b.size = cpu_to_le16(sizeof(b) - 2); -+ b.hdr.fc = WF_FTYPE_MGMTi | WF_FSTYPE_NULLi; -+ b.hdr.dur = 0; -+ MAC_BCAST(b.hdr.a1); -+ MAC_COPY(b.hdr.a2, adev->dev_addr); -+ MAC_COPY(b.hdr.a3, adev->bssid); -+ b.hdr.seq = 0; -+ -+ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_NULL_DATA, &b, sizeof(b)); -+ -+ FN_EXIT1(result); -+ return result; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_s_set_beacon_template -+*/ -+static int -+acx_s_set_beacon_template(acx_device_t *adev) -+{ -+ struct acx_template_beacon bcn; -+ int len, result; -+ -+ FN_ENTER; -+ -+ len = acx_fill_beacon_or_proberesp_template(adev, &bcn, WF_FSTYPE_BEACON); -+ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_BEACON, &bcn, len); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_s_set_probe_response_template -+*/ -+static int -+acx_s_set_probe_response_template(acx_device_t *adev) -+{ -+ struct acx_template_proberesp pr; -+ int len, result; -+ -+ FN_ENTER; -+ -+ len = acx_fill_beacon_or_proberesp_template(adev, &pr, WF_FSTYPE_PROBERESP); -+ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_PROBE_RESPONSE, &pr, len); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_s_init_packet_templates() -+** -+** NOTE: order is very important here, to have a correct memory layout! -+** init templates: max Probe Request (station mode), max NULL data, -+** max Beacon, max TIM, max Probe Response. -+*/ -+static int -+acx_s_init_packet_templates(acx_device_t *adev) -+{ -+ acx_ie_memmap_t mm; /* ACX100 only */ -+ int result = NOT_OK; -+ -+ FN_ENTER; -+ -+ log(L_DEBUG|L_INIT, "initializing max packet templates\n"); -+ -+ if (OK != acx_s_init_max_probe_request_template(adev)) -+ goto failed; -+ -+ if (OK != acx_s_init_max_null_data_template(adev)) -+ goto failed; -+ -+ if (OK != acx_s_init_max_beacon_template(adev)) -+ goto failed; -+ -+ if (OK != acx_s_init_max_tim_template(adev)) -+ goto failed; -+ -+ if (OK != acx_s_init_max_probe_response_template(adev)) -+ goto failed; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111 doesn't need the memory map magic below, -+ * and the other templates will be set later (acx_start) */ -+ result = OK; -+ goto success; -+ } -+ -+ /* ACX100 will have its TIM template set, -+ * and we also need to update the memory map */ -+ -+ if (OK != acx_s_set_tim_template(adev)) -+ goto failed_acx100; -+ -+ log(L_DEBUG, "sizeof(memmap)=%d bytes\n", (int)sizeof(mm)); -+ -+ if (OK != acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP)) -+ goto failed_acx100; -+ -+ mm.QueueStart = cpu_to_le32(le32_to_cpu(mm.PacketTemplateEnd) + 4); -+ if (OK != acx_s_configure(adev, &mm, ACX1xx_IE_MEMORY_MAP)) -+ goto failed_acx100; -+ -+ result = OK; -+ goto success; -+ -+failed_acx100: -+ log(L_DEBUG|L_INIT, -+ /* "cb=0x%X\n" */ -+ "ACXMemoryMap:\n" -+ ".CodeStart=0x%X\n" -+ ".CodeEnd=0x%X\n" -+ ".WEPCacheStart=0x%X\n" -+ ".WEPCacheEnd=0x%X\n" -+ ".PacketTemplateStart=0x%X\n" -+ ".PacketTemplateEnd=0x%X\n", -+ /* len, */ -+ le32_to_cpu(mm.CodeStart), -+ le32_to_cpu(mm.CodeEnd), -+ le32_to_cpu(mm.WEPCacheStart), -+ le32_to_cpu(mm.WEPCacheEnd), -+ le32_to_cpu(mm.PacketTemplateStart), -+ le32_to_cpu(mm.PacketTemplateEnd)); -+ -+failed: -+ printk("%s: %s() FAILED\n", adev->ndev->name, __func__); -+ -+success: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_s_set_probe_request_template(acx_device_t *adev) -+{ -+ struct acx_template_probereq probereq; -+ char *p; -+ int res; -+ int frame_len; -+ -+ FN_ENTER; -+ -+ memset(&probereq, 0, sizeof(probereq)); -+ -+ probereq.fc = WF_FTYPE_MGMTi | WF_FSTYPE_PROBEREQi; -+ MAC_BCAST(probereq.da); -+ MAC_COPY(probereq.sa, adev->dev_addr); -+ MAC_BCAST(probereq.bssid); -+ -+ p = probereq.variable; -+ p = wlan_fill_ie_ssid(p, adev->essid_len, adev->essid); -+ p = wlan_fill_ie_rates(p, adev->rate_supported_len, adev->rate_supported); -+ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, adev->rate_supported); -+ frame_len = p - (char*)&probereq; -+ probereq.size = cpu_to_le16(frame_len - 2); -+ -+ res = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_PROBE_REQUEST, &probereq, frame_len); -+ FN_EXIT0; -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acx_s_init_mac -+*/ -+int -+acx_s_init_mac(acx_device_t *adev) -+{ -+ int result = NOT_OK; -+ -+ FN_ENTER; -+ -+ if (IS_ACX111(adev)) { -+ adev->ie_len = acx111_ie_len; -+ adev->ie_len_dot11 = acx111_ie_len_dot11; -+ } else { -+ adev->ie_len = acx100_ie_len; -+ adev->ie_len_dot11 = acx100_ie_len_dot11; -+ } -+ -+#if defined (ACX_MEM) -+ adev->memblocksize = 256; /* 256 is default */ -+ /* try to load radio for both ACX100 and ACX111, since both -+ * chips have at least some firmware versions making use of an -+ * external radio module */ -+ acxmem_s_upload_radio(adev); -+#else -+ if (IS_PCI(adev)) { -+ adev->memblocksize = 256; /* 256 is default */ -+ /* try to load radio for both ACX100 and ACX111, since both -+ * chips have at least some firmware versions making use of an -+ * external radio module */ -+ acxpci_s_upload_radio(adev); -+ } else { -+ adev->memblocksize = 128; -+ } -+#endif -+ -+ if (IS_ACX111(adev)) { -+ /* for ACX111, the order is different from ACX100 -+ 1. init packet templates -+ 2. create station context and create dma regions -+ 3. init wep default keys -+ */ -+ if (OK != acx_s_init_packet_templates(adev)) -+ goto fail; -+ if (OK != acx111_s_create_dma_regions(adev)) { -+ printk("%s: acx111_create_dma_regions FAILED\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ } else { -+ if (OK != acx100_s_init_wep(adev)) -+ goto fail; -+ if (OK != acx_s_init_packet_templates(adev)) -+ goto fail; -+ if (OK != acx100_s_create_dma_regions(adev)) { -+ printk("%s: acx100_create_dma_regions FAILED\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ } -+ -+ MAC_COPY(adev->ndev->dev_addr, adev->dev_addr); -+ result = OK; -+ -+fail: -+ if (result) -+ printk("acx: init_mac() FAILED\n"); -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+void -+acx_s_set_sane_reg_domain(acx_device_t *adev, int do_set) -+{ -+ unsigned mask; -+ -+ unsigned int i; -+ -+ for (i = 0; i < sizeof(acx_reg_domain_ids); i++) -+ if (acx_reg_domain_ids[i] == adev->reg_dom_id) -+ break; -+ -+ if (sizeof(acx_reg_domain_ids) == i) { -+ log(L_INIT, "Invalid or unsupported regulatory domain" -+ " 0x%02X specified, falling back to FCC (USA)!" -+ " Please report if this sounds fishy!\n", -+ adev->reg_dom_id); -+ i = 0; -+ adev->reg_dom_id = acx_reg_domain_ids[i]; -+ -+ /* since there was a mismatch, we need to force updating */ -+ do_set = 1; -+ } -+ -+ if (do_set) { -+ acx_ie_generic_t dom; -+ dom.m.bytes[0] = adev->reg_dom_id; -+ acx_s_configure(adev, &dom, ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN); -+ } -+ -+ adev->reg_dom_chanmask = reg_domain_channel_masks[i]; -+ -+ mask = (1 << (adev->channel - 1)); -+ if (!(adev->reg_dom_chanmask & mask)) { -+ /* hmm, need to adjust our channel to reside within domain */ -+ mask = 1; -+ for (i = 1; i <= 14; i++) { -+ if (adev->reg_dom_chanmask & mask) { -+ printk("%s: adjusting selected channel from %d " -+ "to %d due to new regulatory domain\n", -+ adev->ndev->name, adev->channel, i); -+ adev->channel = i; -+ break; -+ } -+ mask <<= 1; -+ } -+ } -+} -+ -+ -+#if POWER_SAVE_80211 -+static void -+acx_s_update_80211_powersave_mode(acx_device_t *adev) -+{ -+ /* merge both structs in a union to be able to have common code */ -+ union { -+ acx111_ie_powersave_t acx111; -+ acx100_ie_powersave_t acx100; -+ } pm; -+ -+ /* change 802.11 power save mode settings */ -+ log(L_INIT, "updating 802.11 power save mode settings: " -+ "wakeup_cfg 0x%02X, listen interval %u, " -+ "options 0x%02X, hangover period %u, " -+ "enhanced_ps_transition_time %u\n", -+ adev->ps_wakeup_cfg, adev->ps_listen_interval, -+ adev->ps_options, adev->ps_hangover_period, -+ adev->ps_enhanced_transition_time); -+ acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT); -+ log(L_INIT, "Previous PS mode settings: wakeup_cfg 0x%02X, " -+ "listen interval %u, options 0x%02X, " -+ "hangover period %u, " -+ "enhanced_ps_transition_time %u, beacon_rx_time %u\n", -+ pm.acx111.wakeup_cfg, -+ pm.acx111.listen_interval, -+ pm.acx111.options, -+ pm.acx111.hangover_period, -+ IS_ACX111(adev) ? -+ pm.acx111.enhanced_ps_transition_time -+ : pm.acx100.enhanced_ps_transition_time, -+ IS_ACX111(adev) ? -+ pm.acx111.beacon_rx_time -+ : (u32)-1 -+ ); -+ pm.acx111.wakeup_cfg = adev->ps_wakeup_cfg; -+ pm.acx111.listen_interval = adev->ps_listen_interval; -+ pm.acx111.options = adev->ps_options; -+ pm.acx111.hangover_period = adev->ps_hangover_period; -+ if (IS_ACX111(adev)) { -+ pm.acx111.beacon_rx_time = cpu_to_le32(adev->ps_beacon_rx_time); -+ pm.acx111.enhanced_ps_transition_time = cpu_to_le32(adev->ps_enhanced_transition_time); -+ } else { -+ pm.acx100.enhanced_ps_transition_time = cpu_to_le16(adev->ps_enhanced_transition_time); -+ } -+ acx_s_configure(adev, &pm, ACX1xx_IE_POWER_MGMT); -+ acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT); -+ log(L_INIT, "wakeup_cfg: 0x%02X\n", pm.acx111.wakeup_cfg); -+ acx_s_msleep(40); -+ acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT); -+ log(L_INIT, "wakeup_cfg: 0x%02X\n", pm.acx111.wakeup_cfg); -+ log(L_INIT, "power save mode change %s\n", -+ (pm.acx111.wakeup_cfg & PS_CFG_PENDING) ? "FAILED" : "was successful"); -+ /* FIXME: maybe verify via PS_CFG_PENDING bit here -+ * that power save mode change was successful. */ -+ /* FIXME: we shouldn't trigger a scan immediately after -+ * fiddling with power save mode (since the firmware is sending -+ * a NULL frame then). */ -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_s_update_card_settings -+** -+** Applies accumulated changes in various adev->xxxx members -+** Called by ioctl commit handler, acx_start, acx_set_defaults, -+** acx_s_after_interrupt_task (if IRQ_CMD_UPDATE_CARD_CFG), -+*/ -+static void -+acx111_s_sens_radio_16_17(acx_device_t *adev) -+{ -+ u32 feature1, feature2; -+ -+ if ((adev->sensitivity < 1) || (adev->sensitivity > 3)) { -+ printk("%s: invalid sensitivity setting (1..3), " -+ "setting to 1\n", adev->ndev->name); -+ adev->sensitivity = 1; -+ } -+ acx111_s_get_feature_config(adev, &feature1, &feature2); -+ CLEAR_BIT(feature1, FEATURE1_LOW_RX|FEATURE1_EXTRA_LOW_RX); -+ if (adev->sensitivity > 1) -+ SET_BIT(feature1, FEATURE1_LOW_RX); -+ if (adev->sensitivity > 2) -+ SET_BIT(feature1, FEATURE1_EXTRA_LOW_RX); -+ acx111_s_feature_set(adev, feature1, feature2); -+} -+ -+ -+void -+acx_s_update_card_settings(acx_device_t *adev) -+{ -+ unsigned long flags; -+ unsigned int start_scan = 0; -+ int i; -+ -+ FN_ENTER; -+ -+ log(L_INIT, "get_mask 0x%08X, set_mask 0x%08X\n", -+ adev->get_mask, adev->set_mask); -+ -+ /* Track dependencies betweed various settings */ -+ -+ if (adev->set_mask & (GETSET_MODE|GETSET_RESCAN|GETSET_WEP)) { -+ log(L_INIT, "important setting has been changed. " -+ "Need to update packet templates, too\n"); -+ SET_BIT(adev->set_mask, SET_TEMPLATES); -+ } -+ if (adev->set_mask & GETSET_CHANNEL) { -+ /* This will actually tune RX/TX to the channel */ -+ SET_BIT(adev->set_mask, GETSET_RX|GETSET_TX); -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ /* Beacons contain channel# - update them */ -+ SET_BIT(adev->set_mask, SET_TEMPLATES); -+ } -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ start_scan = 1; -+ } -+ } -+ -+ /* Apply settings */ -+ -+#ifdef WHY_SHOULD_WE_BOTHER /* imagine we were just powered off */ -+ /* send a disassoc request in case it's required */ -+ if (adev->set_mask & (GETSET_MODE|GETSET_RESCAN|GETSET_CHANNEL|GETSET_WEP)) { -+ if (ACX_MODE_2_STA == adev->mode) { -+ if (ACX_STATUS_4_ASSOCIATED == adev->status) { -+ log(L_ASSOC, "we were ASSOCIATED - " -+ "sending disassoc request\n"); -+ acx_lock(adev, flags); -+ acx_l_transmit_disassoc(adev, NULL); -+ /* FIXME: deauth? */ -+ acx_unlock(adev, flags); -+ } -+ /* need to reset some other stuff as well */ -+ log(L_DEBUG, "resetting bssid\n"); -+ MAC_ZERO(adev->bssid); -+ SET_BIT(adev->set_mask, SET_TEMPLATES|SET_STA_LIST); -+ start_scan = 1; -+ } -+ } -+#endif -+ -+ if (adev->get_mask & GETSET_STATION_ID) { -+ u8 stationID[4 + ACX1xx_IE_DOT11_STATION_ID_LEN]; -+ const u8 *paddr; -+ -+ acx_s_interrogate(adev, &stationID, ACX1xx_IE_DOT11_STATION_ID); -+ paddr = &stationID[4]; -+ for (i = 0; i < ETH_ALEN; i++) { -+ /* we copy the MAC address (reversed in -+ * the card) to the netdevice's MAC -+ * address, and on ifup it will be -+ * copied into iwadev->dev_addr */ -+ adev->ndev->dev_addr[ETH_ALEN - 1 - i] = paddr[i]; -+ } -+ CLEAR_BIT(adev->get_mask, GETSET_STATION_ID); -+ } -+ -+ if (adev->get_mask & GETSET_SENSITIVITY) { -+ if ((RADIO_RFMD_11 == adev->radio_type) -+ || (RADIO_MAXIM_0D == adev->radio_type) -+ || (RADIO_RALINK_15 == adev->radio_type)) { -+ acx_s_read_phy_reg(adev, 0x30, &adev->sensitivity); -+ } else { -+ log(L_INIT, "don't know how to get sensitivity " -+ "for radio type 0x%02X\n", adev->radio_type); -+ adev->sensitivity = 0; -+ } -+ log(L_INIT, "got sensitivity value %u\n", adev->sensitivity); -+ -+ CLEAR_BIT(adev->get_mask, GETSET_SENSITIVITY); -+ } -+ -+ if (adev->get_mask & GETSET_ANTENNA) { -+ u8 antenna[4 + ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN]; -+ -+ memset(antenna, 0, sizeof(antenna)); -+ acx_s_interrogate(adev, antenna, ACX1xx_IE_DOT11_CURRENT_ANTENNA); -+ adev->antenna = antenna[4]; -+ log(L_INIT, "got antenna value 0x%02X\n", adev->antenna); -+ CLEAR_BIT(adev->get_mask, GETSET_ANTENNA); -+ } -+ -+ if (adev->get_mask & GETSET_ED_THRESH) { -+ if (IS_ACX100(adev)) { -+ u8 ed_threshold[4 + ACX100_IE_DOT11_ED_THRESHOLD_LEN]; -+ -+ memset(ed_threshold, 0, sizeof(ed_threshold)); -+ acx_s_interrogate(adev, ed_threshold, ACX100_IE_DOT11_ED_THRESHOLD); -+ adev->ed_threshold = ed_threshold[4]; -+ } else { -+ log(L_INIT, "acx111 doesn't support ED\n"); -+ adev->ed_threshold = 0; -+ } -+ log(L_INIT, "got Energy Detect (ED) threshold %u\n", adev->ed_threshold); -+ CLEAR_BIT(adev->get_mask, GETSET_ED_THRESH); -+ } -+ -+ if (adev->get_mask & GETSET_CCA) { -+ if (IS_ACX100(adev)) { -+ u8 cca[4 + ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN]; -+ -+ memset(cca, 0, sizeof(adev->cca)); -+ acx_s_interrogate(adev, cca, ACX1xx_IE_DOT11_CURRENT_CCA_MODE); -+ adev->cca = cca[4]; -+ } else { -+ log(L_INIT, "acx111 doesn't support CCA\n"); -+ adev->cca = 0; -+ } -+ log(L_INIT, "got Channel Clear Assessment (CCA) value %u\n", adev->cca); -+ CLEAR_BIT(adev->get_mask, GETSET_CCA); -+ } -+ -+ if (adev->get_mask & GETSET_REG_DOMAIN) { -+ acx_ie_generic_t dom; -+ -+ acx_s_interrogate(adev, &dom, ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN); -+ adev->reg_dom_id = dom.m.bytes[0]; -+ acx_s_set_sane_reg_domain(adev, 0); -+ log(L_INIT, "got regulatory domain 0x%02X\n", adev->reg_dom_id); -+ CLEAR_BIT(adev->get_mask, GETSET_REG_DOMAIN); -+ } -+ -+ if (adev->set_mask & GETSET_STATION_ID) { -+ u8 stationID[4 + ACX1xx_IE_DOT11_STATION_ID_LEN]; -+ u8 *paddr; -+ -+ paddr = &stationID[4]; -+ memcpy(adev->dev_addr, adev->ndev->dev_addr, ETH_ALEN); -+ for (i = 0; i < ETH_ALEN; i++) { -+ /* copy the MAC address we obtained when we noticed -+ * that the ethernet iface's MAC changed -+ * to the card (reversed in -+ * the card!) */ -+ paddr[i] = adev->dev_addr[ETH_ALEN - 1 - i]; -+ } -+ acx_s_configure(adev, &stationID, ACX1xx_IE_DOT11_STATION_ID); -+ CLEAR_BIT(adev->set_mask, GETSET_STATION_ID); -+ } -+ -+ if (adev->set_mask & SET_TEMPLATES) { -+ log(L_INIT, "updating packet templates\n"); -+ switch (adev->mode) { -+ case ACX_MODE_2_STA: -+ acx_s_set_probe_request_template(adev); -+#if POWER_SAVE_80211 -+ acx_s_set_null_data_template(adev); -+#endif -+ break; -+ case ACX_MODE_0_ADHOC: -+ acx_s_set_probe_request_template(adev); -+#if POWER_SAVE_80211 -+ /* maybe power save functionality is somehow possible -+ * for Ad-Hoc mode, too... FIXME: verify it somehow? firmware debug fields? */ -+ acx_s_set_null_data_template(adev); -+#endif -+ /* fall through */ -+ case ACX_MODE_3_AP: -+ acx_s_set_beacon_template(adev); -+ acx_s_set_tim_template(adev); -+ /* BTW acx111 firmware would not send probe responses -+ ** if probe request does not have all basic rates flagged -+ ** by 0x80! Thus firmware does not conform to 802.11, -+ ** it should ignore 0x80 bit in ratevector from STA. -+ ** We can 'fix' it by not using this template and -+ ** sending probe responses by hand. TODO --vda */ -+ acx_s_set_probe_response_template(adev); -+ } -+ /* Needed if generated frames are to be emitted at different tx rate now */ -+ log(L_IRQ, "redoing cmd_join_bssid() after template cfg\n"); -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ CLEAR_BIT(adev->set_mask, SET_TEMPLATES); -+ } -+ if (adev->set_mask & SET_STA_LIST) { -+ acx_lock(adev, flags); -+ acx_l_sta_list_init(adev); -+ CLEAR_BIT(adev->set_mask, SET_STA_LIST); -+ acx_unlock(adev, flags); -+ } -+ if (adev->set_mask & SET_RATE_FALLBACK) { -+ u8 rate[4 + ACX1xx_IE_RATE_FALLBACK_LEN]; -+ -+ /* configure to not do fallbacks when not in auto rate mode */ -+ rate[4] = (adev->rate_auto) ? /* adev->txrate_fallback_retries */ 1 : 0; -+ log(L_INIT, "updating Tx fallback to %u retries\n", rate[4]); -+ acx_s_configure(adev, &rate, ACX1xx_IE_RATE_FALLBACK); -+ CLEAR_BIT(adev->set_mask, SET_RATE_FALLBACK); -+ } -+ if (adev->set_mask & GETSET_TXPOWER) { -+ log(L_INIT, "updating transmit power: %u dBm\n", -+ adev->tx_level_dbm); -+ acx_s_set_tx_level(adev, adev->tx_level_dbm); -+ CLEAR_BIT(adev->set_mask, GETSET_TXPOWER); -+ } -+ -+ if (adev->set_mask & GETSET_SENSITIVITY) { -+ log(L_INIT, "updating sensitivity value: %u\n", -+ adev->sensitivity); -+ switch (adev->radio_type) { -+ case RADIO_RFMD_11: -+ case RADIO_MAXIM_0D: -+ case RADIO_RALINK_15: -+ acx_s_write_phy_reg(adev, 0x30, adev->sensitivity); -+ break; -+ case RADIO_RADIA_16: -+ case RADIO_UNKNOWN_17: -+ acx111_s_sens_radio_16_17(adev); -+ break; -+ default: -+ log(L_INIT, "don't know how to modify sensitivity " -+ "for radio type 0x%02X\n", adev->radio_type); -+ } -+ CLEAR_BIT(adev->set_mask, GETSET_SENSITIVITY); -+ } -+ -+ if (adev->set_mask & GETSET_ANTENNA) { -+ /* antenna */ -+ u8 antenna[4 + ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN]; -+ -+ memset(antenna, 0, sizeof(antenna)); -+ antenna[4] = adev->antenna; -+ log(L_INIT, "updating antenna value: 0x%02X\n", -+ adev->antenna); -+ acx_s_configure(adev, &antenna, ACX1xx_IE_DOT11_CURRENT_ANTENNA); -+ CLEAR_BIT(adev->set_mask, GETSET_ANTENNA); -+ } -+ -+ if (adev->set_mask & GETSET_ED_THRESH) { -+ /* ed_threshold */ -+ log(L_INIT, "updating Energy Detect (ED) threshold: %u\n", -+ adev->ed_threshold); -+ if (IS_ACX100(adev)) { -+ u8 ed_threshold[4 + ACX100_IE_DOT11_ED_THRESHOLD_LEN]; -+ -+ memset(ed_threshold, 0, sizeof(ed_threshold)); -+ ed_threshold[4] = adev->ed_threshold; -+ acx_s_configure(adev, &ed_threshold, ACX100_IE_DOT11_ED_THRESHOLD); -+ } -+ else -+ log(L_INIT, "acx111 doesn't support ED!\n"); -+ CLEAR_BIT(adev->set_mask, GETSET_ED_THRESH); -+ } -+ -+ if (adev->set_mask & GETSET_CCA) { -+ /* CCA value */ -+ log(L_INIT, "updating Channel Clear Assessment " -+ "(CCA) value: 0x%02X\n", adev->cca); -+ if (IS_ACX100(adev)) { -+ u8 cca[4 + ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN]; -+ -+ memset(cca, 0, sizeof(cca)); -+ cca[4] = adev->cca; -+ acx_s_configure(adev, &cca, ACX1xx_IE_DOT11_CURRENT_CCA_MODE); -+ } -+ else -+ log(L_INIT, "acx111 doesn't support CCA!\n"); -+ CLEAR_BIT(adev->set_mask, GETSET_CCA); -+ } -+ -+ if (adev->set_mask & GETSET_LED_POWER) { -+ /* Enable Tx */ -+ log(L_INIT, "updating power LED status: %u\n", adev->led_power); -+ -+ acx_lock(adev, flags); -+#if defined (ACX_MEM) -+ acxmem_l_power_led(adev, adev->led_power); -+#else -+ if (IS_PCI(adev)) -+ acxpci_l_power_led(adev, adev->led_power); -+#endif -+ CLEAR_BIT(adev->set_mask, GETSET_LED_POWER); -+ acx_unlock(adev, flags); -+ } -+ -+ if (adev->set_mask & GETSET_POWER_80211) { -+#if POWER_SAVE_80211 -+ acx_s_update_80211_powersave_mode(adev); -+#endif -+ CLEAR_BIT(adev->set_mask, GETSET_POWER_80211); -+ } -+ -+ if (adev->set_mask & GETSET_CHANNEL) { -+ /* channel */ -+ log(L_INIT, "updating channel to: %u\n", adev->channel); -+ CLEAR_BIT(adev->set_mask, GETSET_CHANNEL); -+ } -+ -+ if (adev->set_mask & GETSET_TX) { -+ /* set Tx */ -+ log(L_INIT, "updating: %s Tx\n", -+ adev->tx_disabled ? "disable" : "enable"); -+ if (adev->tx_disabled) -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ else -+ acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_TX, &adev->channel, 1); -+ CLEAR_BIT(adev->set_mask, GETSET_TX); -+ } -+ -+ if (adev->set_mask & GETSET_RX) { -+ /* Enable Rx */ -+ log(L_INIT, "updating: enable Rx on channel: %u\n", -+ adev->channel); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_RX, &adev->channel, 1); -+ CLEAR_BIT(adev->set_mask, GETSET_RX); -+ } -+ -+ if (adev->set_mask & GETSET_RETRY) { -+ u8 short_retry[4 + ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN]; -+ u8 long_retry[4 + ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN]; -+ -+ log(L_INIT, "updating short retry limit: %u, long retry limit: %u\n", -+ adev->short_retry, adev->long_retry); -+ short_retry[0x4] = adev->short_retry; -+ long_retry[0x4] = adev->long_retry; -+ acx_s_configure(adev, &short_retry, ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT); -+ acx_s_configure(adev, &long_retry, ACX1xx_IE_DOT11_LONG_RETRY_LIMIT); -+ CLEAR_BIT(adev->set_mask, GETSET_RETRY); -+ } -+ -+ if (adev->set_mask & SET_MSDU_LIFETIME) { -+ u8 xmt_msdu_lifetime[4 + ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN]; -+ -+ log(L_INIT, "updating tx MSDU lifetime: %u\n", -+ adev->msdu_lifetime); -+ *(u32 *)&xmt_msdu_lifetime[4] = cpu_to_le32((u32)adev->msdu_lifetime); -+ acx_s_configure(adev, &xmt_msdu_lifetime, ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME); -+ CLEAR_BIT(adev->set_mask, SET_MSDU_LIFETIME); -+ } -+ -+ if (adev->set_mask & GETSET_REG_DOMAIN) { -+ log(L_INIT, "updating regulatory domain: 0x%02X\n", -+ adev->reg_dom_id); -+ acx_s_set_sane_reg_domain(adev, 1); -+ CLEAR_BIT(adev->set_mask, GETSET_REG_DOMAIN); -+ } -+ -+ if (adev->set_mask & GETSET_MODE) { -+ adev->ndev->type = (adev->mode == ACX_MODE_MONITOR) ? -+ adev->monitor_type : ARPHRD_ETHER; -+ -+ switch (adev->mode) { -+ case ACX_MODE_3_AP: -+ -+ acx_lock(adev, flags); -+ acx_l_sta_list_init(adev); -+ adev->aid = 0; -+ adev->ap_client = NULL; -+ MAC_COPY(adev->bssid, adev->dev_addr); -+ /* this basically says "we're connected" */ -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ acx_unlock(adev, flags); -+ -+ acx111_s_feature_off(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER); -+ /* start sending beacons */ -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ break; -+ case ACX_MODE_MONITOR: -+ acx111_s_feature_on(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER); -+ /* this stops beacons */ -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ /* this basically says "we're connected" */ -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ SET_BIT(adev->set_mask, SET_RXCONFIG|SET_WEP_OPTIONS); -+ break; -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ acx111_s_feature_off(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER); -+ -+ acx_lock(adev, flags); -+ adev->aid = 0; -+ adev->ap_client = NULL; -+ acx_unlock(adev, flags); -+ -+ /* we want to start looking for peer or AP */ -+ start_scan = 1; -+ break; -+ case ACX_MODE_OFF: -+ /* TODO: disable RX/TX, stop any scanning activity etc: */ -+ /* adev->tx_disabled = 1; */ -+ /* SET_BIT(adev->set_mask, GETSET_RX|GETSET_TX); */ -+ -+ /* This stops beacons (invalid macmode...) */ -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ acx_set_status(adev, ACX_STATUS_0_STOPPED); -+ break; -+ } -+ CLEAR_BIT(adev->set_mask, GETSET_MODE); -+ } -+ -+ if (adev->set_mask & SET_RXCONFIG) { -+ acx_s_initialize_rx_config(adev); -+ CLEAR_BIT(adev->set_mask, SET_RXCONFIG); -+ } -+ -+ if (adev->set_mask & GETSET_RESCAN) { -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ start_scan = 1; -+ break; -+ } -+ CLEAR_BIT(adev->set_mask, GETSET_RESCAN); -+ } -+ -+ if (adev->set_mask & GETSET_WEP) { -+ /* encode */ -+ -+ ie_dot11WEPDefaultKeyID_t dkey; -+#ifdef DEBUG_WEP -+ struct { -+ u16 type; -+ u16 len; -+ u8 val; -+ } ACX_PACKED keyindic; -+#endif -+ log(L_INIT, "updating WEP key settings\n"); -+ -+ acx_s_set_wepkey(adev); -+ -+ dkey.KeyID = adev->wep_current_index; -+ log(L_INIT, "setting WEP key %u as default\n", dkey.KeyID); -+ acx_s_configure(adev, &dkey, ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET); -+#ifdef DEBUG_WEP -+ keyindic.val = 3; -+ acx_s_configure(adev, &keyindic, ACX111_IE_KEY_CHOOSE); -+#endif -+ start_scan = 1; -+ CLEAR_BIT(adev->set_mask, GETSET_WEP); -+ } -+ -+ if (adev->set_mask & SET_WEP_OPTIONS) { -+ acx100_ie_wep_options_t options; -+ if (IS_ACX111(adev)) { -+ log(L_DEBUG, "setting WEP Options for acx111 is not supported\n"); -+ } else { -+ log(L_INIT, "setting WEP Options\n"); -+ acx100_s_init_wep(adev); -+#if 0 -+ /* let's choose maximum setting: 4 default keys, -+ * plus 10 other keys: */ -+ options.NumKeys = cpu_to_le16(DOT11_MAX_DEFAULT_WEP_KEYS + 10); -+ /* don't decrypt default key only, -+ * don't override decryption: */ -+ options.WEPOption = 0; -+ if (adev->mode == ACX_MODE_MONITOR) { -+ /* don't decrypt default key only, -+ * override decryption mechanism: */ -+ options.WEPOption = 2; -+ } -+ -+ acx_s_configure(adev, &options, ACX100_IE_WEP_OPTIONS); -+#endif -+ } -+ CLEAR_BIT(adev->set_mask, SET_WEP_OPTIONS); -+ } -+ -+ /* Rescan was requested */ -+ if (start_scan) { -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ /* We can avoid clearing list if join code -+ ** will be a bit more clever about not picking -+ ** 'bad' AP over and over again */ -+ acx_lock(adev, flags); -+ adev->ap_client = NULL; -+ acx_l_sta_list_init(adev); -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); -+ acx_unlock(adev, flags); -+ -+ acx_s_cmd_start_scan(adev); -+ } -+ } -+ -+ /* debug, rate, and nick don't need any handling */ -+ /* what about sniffing mode?? */ -+ -+ log(L_INIT, "get_mask 0x%08X, set_mask 0x%08X - after update\n", -+ adev->get_mask, adev->set_mask); -+ -+/* end: */ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_e_after_interrupt_task -+*/ -+static int -+acx_s_recalib_radio(acx_device_t *adev) -+{ -+ if (IS_ACX111(adev)) { -+ acx111_cmd_radiocalib_t cal; -+ -+ printk("%s: recalibrating radio\n", adev->ndev->name); -+ /* automatic recalibration, choose all methods: */ -+ cal.methods = cpu_to_le32(0x8000000f); -+ /* automatic recalibration every 60 seconds (value in TUs) -+ * I wonder what the firmware default here is? */ -+ cal.interval = cpu_to_le32(58594); -+ return acx_s_issue_cmd_timeo(adev, ACX111_CMD_RADIOCALIB, -+ &cal, sizeof(cal), CMD_TIMEOUT_MS(100)); -+ } else { -+ /* On ACX100, we need to recalibrate the radio -+ * by issuing a GETSET_TX|GETSET_RX */ -+ if (/* (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0)) && -+ (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0)) && */ -+ (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_TX, &adev->channel, 1)) && -+ (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_RX, &adev->channel, 1)) ) -+ return OK; -+ return NOT_OK; -+ } -+} -+ -+static void -+acx_s_after_interrupt_recalib(acx_device_t *adev) -+{ -+ int res; -+ -+ /* this helps with ACX100 at least; -+ * hopefully ACX111 also does a -+ * recalibration here */ -+ -+ /* clear flag beforehand, since we want to make sure -+ * it's cleared; then only set it again on specific circumstances */ -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ -+ /* better wait a bit between recalibrations to -+ * prevent overheating due to torturing the card -+ * into working too long despite high temperature -+ * (just a safety measure) */ -+ if (adev->recalib_time_last_success -+ && time_before(jiffies, adev->recalib_time_last_success -+ + RECALIB_PAUSE * 60 * HZ)) { -+ if (adev->recalib_msg_ratelimit <= 4) { -+ printk("%s: less than " STRING(RECALIB_PAUSE) -+ " minutes since last radio recalibration, " -+ "not recalibrating (maybe card is too hot?)\n", -+ adev->ndev->name); -+ adev->recalib_msg_ratelimit++; -+ if (adev->recalib_msg_ratelimit == 5) -+ printk("disabling above message until next recalib\n"); -+ } -+ return; -+ } -+ -+ adev->recalib_msg_ratelimit = 0; -+ -+ /* note that commands sometimes fail (card busy), -+ * so only clear flag if we were fully successful */ -+ res = acx_s_recalib_radio(adev); -+ if (res == OK) { -+ printk("%s: successfully recalibrated radio\n", -+ adev->ndev->name); -+ adev->recalib_time_last_success = jiffies; -+ adev->recalib_failure_count = 0; -+ } else { -+ /* failed: resubmit, but only limited -+ * amount of times within some time range -+ * to prevent endless loop */ -+ -+ adev->recalib_time_last_success = 0; /* we failed */ -+ -+ /* if some time passed between last -+ * attempts, then reset failure retry counter -+ * to be able to do next recalib attempt */ -+ if (time_after(jiffies, adev->recalib_time_last_attempt + 5*HZ)) -+ adev->recalib_failure_count = 0; -+ -+ if (adev->recalib_failure_count < 5) { -+ /* increment inside only, for speedup of outside path */ -+ adev->recalib_failure_count++; -+ adev->recalib_time_last_attempt = jiffies; -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ } -+ } -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) -+static void -+acx_e_after_interrupt_task(struct work_struct *work) -+{ -+ acx_device_t *adev = container_of(work, acx_device_t, after_interrupt_task); -+#else -+ static void -+ acx_e_after_interrupt_task(void *data) -+ { -+ struct net_device *ndev = (struct net_device*)data; -+ acx_device_t *adev = ndev2adev(ndev); -+#endif -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ if (!adev->after_interrupt_jobs) -+ goto end; /* no jobs to do */ -+ -+#if TX_CLEANUP_IN_SOFTIRQ -+ /* can happen only on PCI */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_TX_CLEANUP) { -+ acx_lock(adev, flags); -+ acxpci_l_clean_txdesc(adev); -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_TX_CLEANUP); -+ acx_unlock(adev, flags); -+ } -+#endif -+ /* we see lotsa tx errors */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_RADIO_RECALIB) { -+ acx_s_after_interrupt_recalib(adev); -+ } -+ -+ /* a poor interrupt code wanted to do update_card_settings() */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_UPDATE_CARD_CFG) { -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) -+ acx_s_update_card_settings(adev); -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ } -+ -+ /* 1) we detected that no Scan_Complete IRQ came from fw, or -+ ** 2) we found too many STAs */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_STOP_SCAN) { -+ log(L_IRQ, "sending a stop scan cmd...\n"); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_STOP_SCAN, NULL, 0); -+ /* HACK: set the IRQ bit, since we won't get a -+ * scan complete IRQ any more on ACX111 (works on ACX100!), -+ * since _we_, not a fw, have stopped the scan */ -+ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_STOP_SCAN); -+ } -+ -+ /* either fw sent Scan_Complete or we detected that -+ ** no Scan_Complete IRQ came from fw. Finish scanning, -+ ** pick join partner if any */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_COMPLETE_SCAN) { -+ if (adev->status == ACX_STATUS_1_SCANNING) { -+ if (OK != acx_s_complete_scan(adev)) { -+ SET_BIT(adev->after_interrupt_jobs, -+ ACX_AFTER_IRQ_RESTART_SCAN); -+ } -+ } else { -+ /* + scan kills current join status - restore it -+ ** (do we need it for STA?) */ -+ /* + does it happen only with active scans? -+ ** active and passive scans? ALL scans including -+ ** background one? */ -+ /* + was not verified that everything is restored -+ ** (but at least we start to emit beacons again) */ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ log(L_IRQ, "redoing cmd_join_bssid() after scan\n"); -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ } -+ } -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_COMPLETE_SCAN); -+ } -+ -+ /* STA auth or assoc timed out, start over again */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_RESTART_SCAN) { -+ log(L_IRQ, "sending a start_scan cmd...\n"); -+ acx_s_cmd_start_scan(adev); -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_RESTART_SCAN); -+ } -+ -+ /* whee, we got positive assoc response! 8) */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_ASSOCIATE) { -+ acx_ie_generic_t pdr; -+ /* tiny race window exists, checking that we still a STA */ -+ switch (adev->mode) { -+ case ACX_MODE_2_STA: -+ pdr.m.aid = cpu_to_le16(adev->aid); -+ acx_s_configure(adev, &pdr, ACX1xx_IE_ASSOC_ID); -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ log(L_ASSOC|L_DEBUG, "ASSOCIATED!\n"); -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_ASSOCIATE); -+ } -+ } -+end: -+ acx_sem_unlock(adev); -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_schedule_task -+** -+** Schedule the call of the after_interrupt method after leaving -+** the interrupt context. -+*/ -+void -+acx_schedule_task(acx_device_t *adev, unsigned int set_flag) -+{ -+ SET_BIT(adev->after_interrupt_jobs, set_flag); -+ SCHEDULE_WORK(&adev->after_interrupt_task); -+} -+ -+ -+/*********************************************************************** -+*/ -+void -+acx_init_task_scheduler(acx_device_t *adev) -+{ -+ /* configure task scheduler */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) -+ INIT_WORK(&adev->after_interrupt_task, acx_e_after_interrupt_task); -+#else -+ INIT_WORK(&adev->after_interrupt_task, acx_e_after_interrupt_task, -+ adev->ndev); -+#endif -+} -+ -+ -+/*********************************************************************** -+** acx_s_start -+*/ -+void -+acx_s_start(acx_device_t *adev) -+{ -+ FN_ENTER; -+ -+ /* -+ * Ok, now we do everything that can possibly be done with ioctl -+ * calls to make sure that when it was called before the card -+ * was up we get the changes asked for -+ */ -+ -+ SET_BIT(adev->set_mask, SET_TEMPLATES|SET_STA_LIST|GETSET_WEP -+ |GETSET_TXPOWER|GETSET_ANTENNA|GETSET_ED_THRESH|GETSET_CCA -+ |GETSET_REG_DOMAIN|GETSET_MODE|GETSET_CHANNEL -+ |GETSET_TX|GETSET_RX|GETSET_STATION_ID); -+ -+ log(L_INIT, "updating initial settings on iface activation\n"); -+ acx_s_update_card_settings(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_update_capabilities -+*/ -+void -+acx_update_capabilities(acx_device_t *adev) -+{ -+ u16 cap = 0; -+ -+ switch (adev->mode) { -+ case ACX_MODE_3_AP: -+ SET_BIT(cap, WF_MGMT_CAP_ESS); break; -+ case ACX_MODE_0_ADHOC: -+ SET_BIT(cap, WF_MGMT_CAP_IBSS); break; -+ /* other types of stations do not emit beacons */ -+ } -+ -+ if (adev->wep_restricted) { -+ SET_BIT(cap, WF_MGMT_CAP_PRIVACY); -+ } -+ if (adev->cfgopt_dot11ShortPreambleOption) { -+ SET_BIT(cap, WF_MGMT_CAP_SHORT); -+ } -+ if (adev->cfgopt_dot11PBCCOption) { -+ SET_BIT(cap, WF_MGMT_CAP_PBCC); -+ } -+ if (adev->cfgopt_dot11ChannelAgility) { -+ SET_BIT(cap, WF_MGMT_CAP_AGILITY); -+ } -+ log(L_DEBUG, "caps updated from 0x%04X to 0x%04X\n", -+ adev->capabilities, cap); -+ adev->capabilities = cap; -+} -+ -+/*********************************************************************** -+** Common function to parse ALL configoption struct formats -+** (ACX100 and ACX111; FIXME: how to make it work with ACX100 USB!?!?). -+** FIXME: logging should be removed here and added to a /proc file instead -+*/ -+void -+acx_s_parse_configoption(acx_device_t *adev, const acx111_ie_configoption_t *pcfg) -+{ -+ const u8 *pEle; -+ int i; -+ int is_acx111 = IS_ACX111(adev); -+ -+ if (acx_debug & L_DEBUG) { -+ printk("configoption struct content:\n"); -+ acx_dump_bytes(pcfg, sizeof(*pcfg)); -+ } -+ -+ if (( is_acx111 && (adev->eeprom_version == 5)) -+ || (!is_acx111 && (adev->eeprom_version == 4)) -+ || (!is_acx111 && (adev->eeprom_version == 5))) { -+ /* these versions are known to be supported */ -+ } else { -+ printk("unknown chip and EEPROM version combination (%s, v%d), " -+ "don't know how to parse config options yet. " -+ "Please report\n", is_acx111 ? "ACX111" : "ACX100", -+ adev->eeprom_version); -+ return; -+ } -+ -+ /* first custom-parse the first part which has chip-specific layout */ -+ -+ pEle = (const u8 *) pcfg; -+ -+ pEle += 4; /* skip (type,len) header */ -+ -+ memcpy(adev->cfgopt_NVSv, pEle, sizeof(adev->cfgopt_NVSv)); -+ pEle += sizeof(adev->cfgopt_NVSv); -+ -+ if (is_acx111) { -+ adev->cfgopt_NVS_vendor_offs = le16_to_cpu(*(u16 *)pEle); -+ pEle += sizeof(adev->cfgopt_NVS_vendor_offs); -+ -+ adev->cfgopt_probe_delay = 200; /* good default value? */ -+ pEle += 2; /* FIXME: unknown, value 0x0001 */ -+ } else { -+ memcpy(adev->cfgopt_MAC, pEle, sizeof(adev->cfgopt_MAC)); -+ pEle += sizeof(adev->cfgopt_MAC); -+ -+ adev->cfgopt_probe_delay = le16_to_cpu(*(u16 *)pEle); -+ pEle += sizeof(adev->cfgopt_probe_delay); -+ if ((adev->cfgopt_probe_delay < 100) || (adev->cfgopt_probe_delay > 500)) { -+ printk("strange probe_delay value %d, " -+ "tweaking to 200\n", adev->cfgopt_probe_delay); -+ adev->cfgopt_probe_delay = 200; -+ } -+ } -+ -+ adev->cfgopt_eof_memory = le32_to_cpu(*(u32 *)pEle); -+ pEle += sizeof(adev->cfgopt_eof_memory); -+ -+ printk("NVS_vendor_offs:%04X probe_delay:%d eof_memory:%d\n", -+ adev->cfgopt_NVS_vendor_offs, -+ adev->cfgopt_probe_delay, -+ adev->cfgopt_eof_memory); -+ -+ adev->cfgopt_dot11CCAModes = *pEle++; -+ adev->cfgopt_dot11Diversity = *pEle++; -+ adev->cfgopt_dot11ShortPreambleOption = *pEle++; -+ adev->cfgopt_dot11PBCCOption = *pEle++; -+ adev->cfgopt_dot11ChannelAgility = *pEle++; -+ adev->cfgopt_dot11PhyType = *pEle++; -+ adev->cfgopt_dot11TempType = *pEle++; -+ printk("CCAModes:%02X Diversity:%02X ShortPreOpt:%02X " -+ "PBCC:%02X ChanAgil:%02X PHY:%02X Temp:%02X\n", -+ adev->cfgopt_dot11CCAModes, -+ adev->cfgopt_dot11Diversity, -+ adev->cfgopt_dot11ShortPreambleOption, -+ adev->cfgopt_dot11PBCCOption, -+ adev->cfgopt_dot11ChannelAgility, -+ adev->cfgopt_dot11PhyType, -+ adev->cfgopt_dot11TempType); -+ -+ /* then use common parsing for next part which has common layout */ -+ -+ pEle++; /* skip table_count (6) */ -+ -+ if (IS_MEM(adev) && IS_ACX100(adev)) -+ { -+ /* -+ * For iPaq hx4700 Generic Slave F/W 1.10.7.K. I'm not sure if these -+ * 4 extra bytes are before the dot11 things above or after, so I'm just -+ * going to guess after. If someone sees these aren't reasonable numbers, -+ * please fix this. -+ * The area from which the dot11 values above are read contains: -+ * 04 01 01 01 00 05 01 06 00 02 01 02 -+ * the 8 dot11 reads above take care of 8 of them, but which 8... -+ */ -+ pEle += 4; -+ } -+ -+ adev->cfgopt_antennas.type = pEle[0]; -+ adev->cfgopt_antennas.len = pEle[1]; -+ printk("AntennaID:%02X Len:%02X Data:", -+ adev->cfgopt_antennas.type, adev->cfgopt_antennas.len); -+ for (i = 0; i < pEle[1]; i++) { -+ adev->cfgopt_antennas.list[i] = pEle[i+2]; -+ printk("%02X ", pEle[i+2]); -+ } -+ printk("\n"); -+ -+ pEle += pEle[1] + 2; -+ adev->cfgopt_power_levels.type = pEle[0]; -+ adev->cfgopt_power_levels.len = pEle[1]; -+ printk("PowerLevelID:%02X Len:%02X Data:", -+ adev->cfgopt_power_levels.type, adev->cfgopt_power_levels.len); -+ for (i = 0; i < pEle[1]; i++) { -+ adev->cfgopt_power_levels.list[i] = le16_to_cpu(*(u16 *)&pEle[i*2+2]); -+ printk("%04X ", adev->cfgopt_power_levels.list[i]); -+ } -+ printk("\n"); -+ -+ pEle += pEle[1]*2 + 2; -+ adev->cfgopt_data_rates.type = pEle[0]; -+ adev->cfgopt_data_rates.len = pEle[1]; -+ printk("DataRatesID:%02X Len:%02X Data:", -+ adev->cfgopt_data_rates.type, adev->cfgopt_data_rates.len); -+ for (i = 0; i < pEle[1]; i++) { -+ adev->cfgopt_data_rates.list[i] = pEle[i+2]; -+ printk("%02X ", pEle[i+2]); -+ } -+ printk("\n"); -+ -+ pEle += pEle[1] + 2; -+ adev->cfgopt_domains.type = pEle[0]; -+ adev->cfgopt_domains.len = pEle[1]; -+ if (IS_MEM(adev) && IS_ACX100(adev)) -+ { -+ /* -+ * For iPaq hx4700 Generic Slave F/W 1.10.7.K. -+ * There's an extra byte between this structure and the next -+ * that is not accounted for with this structure's length. It's -+ * most likely a bug in the firmware, but we can fix it here -+ * by bumping the length of this field by 1. -+ */ -+ adev->cfgopt_domains.len++; -+ } -+ printk("DomainID:%02X Len:%02X Data:", -+ adev->cfgopt_domains.type, adev->cfgopt_domains.len); -+ for (i = 0; i < adev->cfgopt_domains.len; i++) { -+ adev->cfgopt_domains.list[i] = pEle[i+2]; -+ printk("%02X ", pEle[i+2]); -+ } -+ printk("\n"); -+ -+ pEle += adev->cfgopt_domains.len + 2; -+ -+ adev->cfgopt_product_id.type = pEle[0]; -+ adev->cfgopt_product_id.len = pEle[1]; -+ for (i = 0; i < pEle[1]; i++) { -+ adev->cfgopt_product_id.list[i] = pEle[i+2]; -+ } -+ printk("ProductID:%02X Len:%02X Data:%.*s\n", -+ adev->cfgopt_product_id.type, adev->cfgopt_product_id.len, -+ adev->cfgopt_product_id.len, (char *)adev->cfgopt_product_id.list); -+ -+ pEle += pEle[1] + 2; -+ adev->cfgopt_manufacturer.type = pEle[0]; -+ adev->cfgopt_manufacturer.len = pEle[1]; -+ for (i = 0; i < pEle[1]; i++) { -+ adev->cfgopt_manufacturer.list[i] = pEle[i+2]; -+ } -+ printk("ManufacturerID:%02X Len:%02X Data:%.*s\n", -+ adev->cfgopt_manufacturer.type, adev->cfgopt_manufacturer.len, -+ adev->cfgopt_manufacturer.len, (char *)adev->cfgopt_manufacturer.list); -+/* -+ printk("EEPROM part:\n"); -+ for (i=0; i<58; i++) { -+ printk("%02X =======> 0x%02X\n", -+ i, (u8 *)adev->cfgopt_NVSv[i-2]); -+ } -+*/ -+} -+ -+ -+/*********************************************************************** -+*/ -+static int __init -+acx_e_init_module(void) -+{ -+ int r1,r2,r3,r4; -+ -+ acx_struct_size_check(); -+ -+ printk("acx: this driver is still EXPERIMENTAL\n" -+ "acx: reading README file and/or Craig's HOWTO is " -+ "recommended, visit http://acx100.sf.net in case " -+ "of further questions/discussion\n"); -+ -+#if defined(CONFIG_ACX_PCI) -+ r1 = acxpci_e_init_module(); -+#else -+ r1 = -EINVAL; -+#endif -+#if defined(CONFIG_ACX_MEM) -+ r2 = acxmem_e_init_module(); -+#else -+ r2 = -EINVAL; -+#endif -+#if defined(CONFIG_ACX_USB) -+ r3 = acxusb_e_init_module(); -+#else -+ r3 = -EINVAL; -+#endif -+#if defined(CONFIG_ACX_CS) -+ r4 = acx_cs_init(); -+#else -+ r4 = -EINVAL; -+#endif -+ if (r2 && r1 && r3 && r4) { /* all failed! */ -+ if (r3 || r1) -+ return r3 ? r3 : r1; -+ else -+ return r2; -+ } -+ /* return success if at least one succeeded */ -+ return 0; -+ -+} -+ -+static void __exit -+acx_e_cleanup_module(void) -+{ -+#if defined(CONFIG_ACX_PCI) -+ acxpci_e_cleanup_module(); -+#endif -+#if defined(CONFIG_ACX_MEM) -+ acxmem_e_cleanup_module(); -+#endif -+#if defined(CONFIG_ACX_USB) -+ acxusb_e_cleanup_module(); -+#endif -+#if defined(CONFIG_ACX_CS) -+ acx_cs_cleanup(); -+#endif -+} -+ -+module_init(acx_e_init_module) -+module_exit(acx_e_cleanup_module) -Index: linux-2.6.22/drivers/net/wireless/acx/conv.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/conv.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,504 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx.h" -+ -+ -+/*********************************************************************** -+** proto_is_stt -+** -+** Searches the 802.1h Selective Translation Table for a given -+** protocol. -+** -+** prottype - protocol number (in host order) to search for. -+** -+** Returns: -+** 1 - if the table is empty or a match is found. -+** 0 - if the table is non-empty and a match is not found. -+** -+** Based largely on p80211conv.c of the linux-wlan-ng project -+*/ -+static inline int -+proto_is_stt(unsigned int proto) -+{ -+ /* Always return found for now. This is the behavior used by the */ -+ /* Zoom Win95 driver when 802.1h mode is selected */ -+ /* TODO: If necessary, add an actual search we'll probably -+ need this to match the CMAC's way of doing things. -+ Need to do some testing to confirm. -+ */ -+ -+ if (proto == 0x80f3) /* APPLETALK */ -+ return 1; -+ -+ return 0; -+/* return ((prottype == ETH_P_AARP) || (prottype == ETH_P_IPX)); */ -+} -+ -+/* Helpers */ -+ -+static inline void -+store_llc_snap(struct wlan_llc *llc) -+{ -+ llc->dsap = 0xaa; /* SNAP, see IEEE 802 */ -+ llc->ssap = 0xaa; -+ llc->ctl = 0x03; -+} -+static inline int -+llc_is_snap(const struct wlan_llc *llc) -+{ -+ return (llc->dsap == 0xaa) -+ && (llc->ssap == 0xaa) -+ && (llc->ctl == 0x03); -+} -+static inline void -+store_oui_rfc1042(struct wlan_snap *snap) -+{ -+ snap->oui[0] = 0; -+ snap->oui[1] = 0; -+ snap->oui[2] = 0; -+} -+static inline int -+oui_is_rfc1042(const struct wlan_snap *snap) -+{ -+ return (snap->oui[0] == 0) -+ && (snap->oui[1] == 0) -+ && (snap->oui[2] == 0); -+} -+static inline void -+store_oui_8021h(struct wlan_snap *snap) -+{ -+ snap->oui[0] = 0; -+ snap->oui[1] = 0; -+ snap->oui[2] = 0xf8; -+} -+static inline int -+oui_is_8021h(const struct wlan_snap *snap) -+{ -+ return (snap->oui[0] == 0) -+ && (snap->oui[1] == 0) -+ && (snap->oui[2] == 0xf8); -+} -+ -+ -+/*********************************************************************** -+** acx_ether_to_txbuf -+** -+** Uses the contents of the ether frame to build the elements of -+** the 802.11 frame. -+** -+** We don't actually set up the frame header here. That's the -+** MAC's job. We're only handling conversion of DIXII or 802.3+LLC -+** frames to something that works with 802.11. -+** -+** Based largely on p80211conv.c of the linux-wlan-ng project -+*/ -+int -+acx_ether_to_txbuf(acx_device_t *adev, void *txbuf, const struct sk_buff *skb) -+{ -+ struct wlan_hdr_a3 *w_hdr; -+ struct wlan_ethhdr *e_hdr; -+ struct wlan_llc *e_llc; -+ struct wlan_snap *e_snap; -+ const u8 *a1, *a3; -+ int header_len, payload_len = -1; -+ /* protocol type or data length, depending on whether -+ * DIX or 802.3 ethernet format */ -+ u16 proto; -+ u16 fc; -+ -+ FN_ENTER; -+ -+ if (unlikely(!skb->len)) { -+ log(L_DEBUG, "zero-length skb!\n"); -+ goto end; -+ } -+ -+ w_hdr = (struct wlan_hdr_a3*)txbuf; -+ -+ switch (adev->mode) { -+ case ACX_MODE_MONITOR: -+ /* NB: one day we might want to play with DESC_CTL2_FCS -+ ** Will need to stop doing "- WLAN_FCS_LEN" here then */ -+ if (unlikely(skb->len >= WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_FCS_LEN)) { -+ printk("%s: can't tx oversized frame (%d bytes)\n", -+ adev->ndev->name, skb->len); -+ goto end; -+ } -+ memcpy(w_hdr, skb->data, skb->len); -+ payload_len = skb->len; -+ goto end; -+ } -+ -+ /* step 1: classify ether frame, DIX or 802.3? */ -+ e_hdr = (wlan_ethhdr_t *)skb->data; -+ proto = ntohs(e_hdr->type); -+ if (proto <= 1500) { -+ log(L_DEBUG, "tx: 802.3 len: %d\n", skb->len); -+ /* codes <= 1500 reserved for 802.3 lengths */ -+ /* it's 802.3, pass ether payload unchanged, */ -+ /* trim off ethernet header and copy payload to txdesc */ -+ header_len = WLAN_HDR_A3_LEN; -+ } else { -+ /* it's DIXII, time for some conversion */ -+ /* Create 802.11 packet. Header also contains llc and snap. */ -+ -+ log(L_DEBUG, "tx: DIXII len: %d\n", skb->len); -+ -+ /* size of header is 802.11 header + llc + snap */ -+ header_len = WLAN_HDR_A3_LEN + sizeof(wlan_llc_t) + sizeof(wlan_snap_t); -+ /* llc is located behind the 802.11 header */ -+ e_llc = (wlan_llc_t*)(w_hdr + 1); -+ /* snap is located behind the llc */ -+ e_snap = (wlan_snap_t*)(e_llc + 1); -+ -+ /* setup the LLC header */ -+ store_llc_snap(e_llc); -+ -+ /* setup the SNAP header */ -+ e_snap->type = htons(proto); -+ if (proto_is_stt(proto)) { -+ store_oui_8021h(e_snap); -+ } else { -+ store_oui_rfc1042(e_snap); -+ } -+ } -+ /* trim off ethernet header and copy payload to txbuf */ -+ payload_len = skb->len - sizeof(wlan_ethhdr_t); -+ /* TODO: can we just let acx DMA payload from skb instead? */ -+ memcpy((u8*)txbuf + header_len, skb->data + sizeof(wlan_ethhdr_t), payload_len); -+ payload_len += header_len; -+ -+ /* Set up the 802.11 header */ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi); -+ a1 = e_hdr->daddr; -+ a3 = adev->bssid; -+ break; -+ case ACX_MODE_2_STA: -+ fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi | WF_FC_TODSi); -+ a1 = adev->bssid; -+ a3 = e_hdr->daddr; -+ break; -+ case ACX_MODE_3_AP: -+ fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi | WF_FC_FROMDSi); -+ a1 = e_hdr->daddr; -+ a3 = e_hdr->saddr; -+ break; -+ default: -+ printk("%s: error - converting eth to wlan in unknown mode\n", -+ adev->ndev->name); -+ payload_len = -1; -+ goto end; -+ } -+ if (adev->wep_enabled) -+ SET_BIT(fc, WF_FC_ISWEPi); -+ -+ w_hdr->fc = fc; -+ w_hdr->dur = 0; -+ MAC_COPY(w_hdr->a1, a1); -+ MAC_COPY(w_hdr->a2, adev->dev_addr); -+ MAC_COPY(w_hdr->a3, a3); -+ w_hdr->seq = 0; -+ -+#ifdef DEBUG_CONVERT -+ if (acx_debug & L_DATA) { -+ printk("original eth frame [%d]: ", skb->len); -+ acx_dump_bytes(skb->data, skb->len); -+ printk("802.11 frame [%d]: ", payload_len); -+ acx_dump_bytes(w_hdr, payload_len); -+ } -+#endif -+ -+end: -+ FN_EXIT1(payload_len); -+ return payload_len; -+} -+ -+ -+/*********************************************************************** -+** acx_rxbuf_to_ether -+** -+** Uses the contents of a received 802.11 frame to build an ether -+** frame. -+** -+** This function extracts the src and dest address from the 802.11 -+** frame to use in the construction of the eth frame. -+** -+** Based largely on p80211conv.c of the linux-wlan-ng project -+*/ -+struct sk_buff* -+acx_rxbuf_to_ether(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ struct wlan_hdr *w_hdr; -+ struct wlan_ethhdr *e_hdr; -+ struct wlan_llc *e_llc; -+ struct wlan_snap *e_snap; -+ struct sk_buff *skb; -+ const u8 *daddr; -+ const u8 *saddr; -+ const u8 *e_payload; -+ int buflen, payload_length; -+ unsigned int payload_offset, mtu; -+ u16 fc; -+ -+ FN_ENTER; -+ -+ /* This looks complex because it must handle possible -+ ** phy header in rxbuff */ -+ w_hdr = acx_get_wlan_hdr(adev, rxbuf); -+ payload_offset = WLAN_HDR_A3_LEN; /* it is relative to w_hdr */ -+ payload_length = RXBUF_BYTES_USED(rxbuf) /* entire rxbuff... */ -+ - ((u8*)w_hdr - (u8*)rxbuf) /* minus space before 802.11 frame */ -+ - WLAN_HDR_A3_LEN; /* minus 802.11 header */ -+ -+ /* setup some vars for convenience */ -+ fc = w_hdr->fc; -+ switch (WF_FC_FROMTODSi & fc) { -+ case 0: -+ daddr = w_hdr->a1; -+ saddr = w_hdr->a2; -+ break; -+ case WF_FC_FROMDSi: -+ daddr = w_hdr->a1; -+ saddr = w_hdr->a3; -+ break; -+ case WF_FC_TODSi: -+ daddr = w_hdr->a3; -+ saddr = w_hdr->a2; -+ break; -+ default: /* WF_FC_FROMTODSi */ -+ payload_offset += (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN); -+ payload_length -= (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN); -+ daddr = w_hdr->a3; -+ saddr = w_hdr->a4; -+ } -+ -+ if ((WF_FC_ISWEPi & fc) && IS_ACX100(adev)) { -+ /* chop off the IV+ICV WEP header and footer */ -+ log(L_DATA|L_DEBUG, "rx: WEP packet, " -+ "chopping off IV and ICV\n"); -+ payload_offset += WLAN_WEP_IV_LEN; -+ payload_length -= WLAN_WEP_IV_LEN + WLAN_WEP_ICV_LEN; -+ } -+ -+ if (unlikely(payload_length < 0)) { -+ printk("%s: rx frame too short, ignored\n", adev->ndev->name); -+ goto ret_null; -+ } -+ -+ e_hdr = (wlan_ethhdr_t*) ((u8*) w_hdr + payload_offset); -+ e_llc = (wlan_llc_t*) e_hdr; -+ e_snap = (wlan_snap_t*) (e_llc + 1); -+ mtu = adev->ndev->mtu; -+ e_payload = (u8*) (e_snap + 1); -+ -+ log(L_DATA, "rx: payload_offset %d, payload_length %d\n", -+ payload_offset, payload_length); -+ log(L_XFER|L_DATA, -+ "rx: frame info: llc=%02X%02X%02X " -+ "snap.oui=%02X%02X%02X snap.type=%04X\n", -+ e_llc->dsap, e_llc->ssap, e_llc->ctl, -+ e_snap->oui[0], e_snap->oui[1], e_snap->oui[2], -+ ntohs(e_snap->type)); -+ -+ /* Test for the various encodings */ -+ if ((payload_length >= sizeof(wlan_ethhdr_t)) -+ && ((e_llc->dsap != 0xaa) || (e_llc->ssap != 0xaa)) -+ && ( (mac_is_equal(daddr, e_hdr->daddr)) -+ || (mac_is_equal(saddr, e_hdr->saddr)) -+ ) -+ ) { -+ /* 802.3 Encapsulated: */ -+ /* wlan frame body contains complete eth frame (header+body) */ -+ log(L_DEBUG|L_DATA, "rx: 802.3 ENCAP len=%d\n", payload_length); -+ -+ if (unlikely(payload_length > (mtu + ETH_HLEN))) { -+ printk("%s: rx: ENCAP frame too large (%d > %d)\n", -+ adev->ndev->name, -+ payload_length, mtu + ETH_HLEN); -+ goto ret_null; -+ } -+ -+ /* allocate space and setup host buffer */ -+ buflen = payload_length; -+ /* Attempt to align IP header (14 bytes eth header + 2 = 16) */ -+ skb = dev_alloc_skb(buflen + 2); -+ if (unlikely(!skb)) -+ goto no_skb; -+ skb_reserve(skb, 2); -+ skb_put(skb, buflen); /* make room */ -+ -+ /* now copy the data from the 80211 frame */ -+ memcpy(skb->data, e_hdr, payload_length); -+ -+ } else if ( (payload_length >= sizeof(wlan_llc_t)+sizeof(wlan_snap_t)) -+ && llc_is_snap(e_llc) ) { -+ /* wlan frame body contains: AA AA 03 ... (it's a SNAP) */ -+ -+ if ( !oui_is_rfc1042(e_snap) -+ || (proto_is_stt(ieee2host16(e_snap->type)) /* && (ethconv == WLAN_ETHCONV_8021h) */)) { -+ log(L_DEBUG|L_DATA, "rx: SNAP+RFC1042 len=%d\n", payload_length); -+ /* wlan frame body contains: AA AA 03 !(00 00 00) ... -or- */ -+ /* wlan frame body contains: AA AA 03 00 00 00 0x80f3 ... */ -+ /* build eth hdr, type = len, copy AA AA 03... as eth body */ -+ /* it's a SNAP + RFC1042 frame && protocol is in STT */ -+ -+ if (unlikely(payload_length > mtu)) { -+ printk("%s: rx: SNAP frame too large (%d > %d)\n", -+ adev->ndev->name, -+ payload_length, mtu); -+ goto ret_null; -+ } -+ -+ /* allocate space and setup host buffer */ -+ buflen = payload_length + ETH_HLEN; -+ skb = dev_alloc_skb(buflen + 2); -+ if (unlikely(!skb)) -+ goto no_skb; -+ skb_reserve(skb, 2); -+ skb_put(skb, buflen); /* make room */ -+ -+ /* create 802.3 header */ -+ e_hdr = (wlan_ethhdr_t*) skb->data; -+ MAC_COPY(e_hdr->daddr, daddr); -+ MAC_COPY(e_hdr->saddr, saddr); -+ e_hdr->type = htons(payload_length); -+ -+ /* Now copy the data from the 80211 frame. -+ Make room in front for the eth header, and keep the -+ llc and snap from the 802.11 payload */ -+ memcpy(skb->data + ETH_HLEN, -+ e_llc, payload_length); -+ -+ } else { -+ /* wlan frame body contains: AA AA 03 00 00 00 [type] [tail] */ -+ /* build eth hdr, type=[type], copy [tail] as eth body */ -+ log(L_DEBUG|L_DATA, "rx: 802.1h/RFC1042 len=%d\n", -+ payload_length); -+ /* it's an 802.1h frame (an RFC1042 && protocol is not in STT) */ -+ /* build a DIXII + RFC894 */ -+ -+ payload_length -= sizeof(wlan_llc_t) + sizeof(wlan_snap_t); -+ if (unlikely(payload_length > mtu)) { -+ printk("%s: rx: DIXII frame too large (%d > %d)\n", -+ adev->ndev->name, -+ payload_length, mtu); -+ goto ret_null; -+ } -+ -+ /* allocate space and setup host buffer */ -+ buflen = payload_length + ETH_HLEN; -+ skb = dev_alloc_skb(buflen + 2); -+ if (unlikely(!skb)) -+ goto no_skb; -+ skb_reserve(skb, 2); -+ skb_put(skb, buflen); /* make room */ -+ -+ /* create 802.3 header */ -+ e_hdr = (wlan_ethhdr_t *) skb->data; -+ MAC_COPY(e_hdr->daddr, daddr); -+ MAC_COPY(e_hdr->saddr, saddr); -+ e_hdr->type = e_snap->type; -+ -+ /* Now copy the data from the 80211 frame. -+ Make room in front for the eth header, and cut off the -+ llc and snap from the 802.11 payload */ -+ memcpy(skb->data + ETH_HLEN, -+ e_payload, payload_length); -+ } -+ -+ } else { -+ log(L_DEBUG|L_DATA, "rx: NON-ENCAP len=%d\n", payload_length); -+ /* build eth hdr, type=len, copy wlan body as eth body */ -+ /* any NON-ENCAP */ -+ /* it's a generic 80211+LLC or IPX 'Raw 802.3' */ -+ /* build an 802.3 frame */ -+ -+ if (unlikely(payload_length > mtu)) { -+ printk("%s: rx: OTHER frame too large (%d > %d)\n", -+ adev->ndev->name, payload_length, mtu); -+ goto ret_null; -+ } -+ -+ /* allocate space and setup host buffer */ -+ buflen = payload_length + ETH_HLEN; -+ skb = dev_alloc_skb(buflen + 2); -+ if (unlikely(!skb)) -+ goto no_skb; -+ skb_reserve(skb, 2); -+ skb_put(skb, buflen); /* make room */ -+ -+ /* set up the 802.3 header */ -+ e_hdr = (wlan_ethhdr_t *) skb->data; -+ MAC_COPY(e_hdr->daddr, daddr); -+ MAC_COPY(e_hdr->saddr, saddr); -+ e_hdr->type = htons(payload_length); -+ -+ /* now copy the data from the 80211 frame */ -+ memcpy(skb->data + ETH_HLEN, e_llc, payload_length); -+ } -+ -+ skb->dev = adev->ndev; -+ skb->protocol = eth_type_trans(skb, adev->ndev); -+ -+#ifdef DEBUG_CONVERT -+ if (acx_debug & L_DATA) { -+ int len = RXBUF_BYTES_RCVD(adev, rxbuf); -+ printk("p802.11 frame [%d]: ", len); -+ acx_dump_bytes(w_hdr, len); -+ printk("eth frame [%d]: ", skb->len); -+ acx_dump_bytes(skb->data, skb->len); -+ } -+#endif -+ -+ FN_EXIT0; -+ return skb; -+ -+no_skb: -+ printk("%s: rx: no memory for skb (%d bytes)\n", -+ adev->ndev->name, buflen + 2); -+ret_null: -+ FN_EXIT1((int)NULL); -+ return NULL; -+} -Index: linux-2.6.22/drivers/net/wireless/acx/cs.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/cs.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,5703 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+** -+** Slave memory interface support: -+** -+** Todd Blumer - SDG Systems -+** Bill Reese - HP -+** Eric McCorkle - Shadowsun -+** -+** CF support, (c) Fabrice Crohas, Paul Sokolovsky -+*/ -+#define ACX_MEM 1 -+ -+/* -+ * non-zero makes it dump the ACX memory to the console then -+ * panic when you cat /proc/driver/acx_wlan0_diag -+ */ -+#define DUMP_MEM_DEFINED 1 -+ -+#define DUMP_MEM_DURING_DIAG 0 -+#define DUMP_IF_SLOW 0 -+ -+#define PATCH_AROUND_BAD_SPOTS 1 -+#define HX4700_FIRMWARE_CHECKSUM 0x0036862e -+#define HX4700_ALTERNATE_FIRMWARE_CHECKSUM 0x00368a75 -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+ -+/* Linux 2.6.18+ uses */ -+#ifndef UTS_RELEASE -+#include -+#endif -+ -+#include /* required for Lx 2.6.8 ?? */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define PCMCIA_DEBUG 1 -+ -+/* -+ All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If -+ you do not define PCMCIA_DEBUG at all, all the debug code will be -+ left out. If you compile with PCMCIA_DEBUG=0, the debug code will -+ be present but disabled -- but it can then be enabled for specific -+ modules at load time with a 'pc_debug=#' option to insmod. -+ -+*/ -+#include -+#include -+#include -+#include -+#include -+#include "acx.h" -+#include "acx_hw.h" -+ -+#ifdef PCMCIA_DEBUG -+static int pc_debug = PCMCIA_DEBUG; -+module_param(pc_debug, int, 0); -+static char *version = "$Revision: 1.10 $"; -+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); -+#else -+#define DEBUG(n, args...) -+#endif -+ -+ -+static win_req_t memwin; -+ -+typedef struct local_info_t { -+ dev_node_t node; -+ struct net_device *ndev; -+} local_info_t; -+ -+static struct net_device *resume_ndev; -+ -+ -+/*********************************************************************** -+*/ -+ -+#define CARD_EEPROM_ID_SIZE 6 -+ -+#include -+ -+#define REG_ACX_VENDOR_ID 0x900 -+/* -+ * This is the vendor id on the HX4700, anyway -+ */ -+#define ACX_VENDOR_ID 0x8400104c -+ -+typedef enum { -+ ACX_SOFT_RESET = 0, -+ -+ ACX_SLV_REG_ADDR, -+ ACX_SLV_REG_DATA, -+ ACX_SLV_REG_ADATA, -+ -+ ACX_SLV_MEM_CP, -+ ACX_SLV_MEM_ADDR, -+ ACX_SLV_MEM_DATA, -+ ACX_SLV_MEM_CTL, -+} acxreg_t; -+ -+/*********************************************************************** -+*/ -+static void acxmem_i_tx_timeout(struct net_device *ndev); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id); -+#else -+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id, struct pt_regs *regs); -+#endif -+static void acxmem_i_set_multicast_list(struct net_device *ndev); -+ -+static int acxmem_e_open(struct net_device *ndev); -+static int acxmem_e_close(struct net_device *ndev); -+static void acxmem_s_up(struct net_device *ndev); -+static void acxmem_s_down(struct net_device *ndev); -+ -+static void dump_acxmem (acx_device_t *adev, u32 start, int length); -+static int acxmem_complete_hw_reset (acx_device_t *adev); -+static void acxmem_s_delete_dma_regions(acx_device_t *adev); -+ -+static int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+acxmem_e_suspend( struct net_device *ndev, pm_message_t state); -+#else -+acxmem_e_suspend( struct net_device *ndev, u32 state); -+#endif -+static void -+fw_resumer(struct work_struct *notused); -+//fw_resumer( void *data ); -+ -+static int acx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) -+{ -+ struct net_device *ndev = ptr; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ /* -+ * Upper level ioctl() handlers send a NETDEV_CHANGEADDR if the MAC address changes. -+ */ -+ -+ if (NETDEV_CHANGEADDR == event) { -+ /* -+ * the upper layers put the new MAC address in ndev->dev_addr; we just copy -+ * it over and update the ACX with it. -+ */ -+ MAC_COPY(adev->dev_addr, adev->ndev->dev_addr); -+ adev->set_mask |= GETSET_STATION_ID; -+ acx_s_update_card_settings (adev); -+ } -+ -+ return 0; -+} -+ -+static struct notifier_block acx_netdev_notifier = { -+ .notifier_call = acx_netdev_event, -+}; -+ -+/*********************************************************************** -+** Register access -+*/ -+ -+/* Pick one */ -+/* #define INLINE_IO static */ -+#define INLINE_IO static inline -+ -+INLINE_IO u32 -+read_id_register (acx_device_t *adev) -+{ -+ writel (0x24, &adev->iobase[ACX_SLV_REG_ADDR]); -+ return readl (&adev->iobase[ACX_SLV_REG_DATA]); -+} -+ -+INLINE_IO u32 -+read_reg32(acx_device_t *adev, unsigned int offset) -+{ -+ u32 val; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ return readl(((u8*)adev->iobase) + addr); -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ val = readl( &adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return val; -+} -+ -+INLINE_IO u16 -+read_reg16(acx_device_t *adev, unsigned int offset) -+{ -+ u16 lo; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ return readw(((u8 *) adev->iobase) + addr); -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ lo = readw( (u16 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return lo; -+} -+ -+INLINE_IO u8 -+read_reg8(acx_device_t *adev, unsigned int offset) -+{ -+ u8 lo; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) -+ return readb(((u8 *)adev->iobase) + addr); -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ lo = readw( (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return (u8)lo; -+} -+ -+INLINE_IO void -+write_reg32(acx_device_t *adev, unsigned int offset, u32 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writel(val, ((u8*)adev->iobase) + addr); -+ return; -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writel( val, &adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+INLINE_IO void -+write_reg16(acx_device_t *adev, unsigned int offset, u16 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writew(val, ((u8 *)adev->iobase) + addr); -+ return; -+ } -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writew( val, (u16 *) &adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+INLINE_IO void -+write_reg8(acx_device_t *adev, unsigned int offset, u8 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writeb(val, ((u8 *) adev->iobase) + addr); -+ return; -+ } -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writeb( val, (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+/* Handle PCI posting properly: -+ * Make sure that writes reach the adapter in case they require to be executed -+ * *before* the next write, by reading a random (and safely accessible) register. -+ * This call has to be made if there is no read following (which would flush the data -+ * to the adapter), yet the written data has to reach the adapter immediately. */ -+INLINE_IO void -+write_flush(acx_device_t *adev) -+{ -+ /* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */ -+ /* faster version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should also be safe): */ -+ (void) readl(adev->iobase); -+} -+ -+INLINE_IO void -+set_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { -+ u32 tmp; -+ -+ tmp = read_reg32 (adev, offset); -+ tmp = tmp | bits; -+ write_reg32 (adev, offset, tmp); -+ write_flush (adev); -+} -+ -+INLINE_IO void -+clear_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { -+ u32 tmp; -+ -+ tmp = read_reg32 (adev, offset); -+ tmp = tmp & ~bits; -+ write_reg32 (adev, offset, tmp); -+ write_flush (adev); -+} -+ -+/* -+ * Copy from PXA memory to the ACX memory. This assumes both the PXA and ACX -+ * addresses are 32 bit aligned. Count is in bytes. -+ */ -+INLINE_IO void -+write_slavemem32 (acx_device_t *adev, u32 slave_address, u32 val) -+{ -+ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, val); -+} -+ -+INLINE_IO u32 -+read_slavemem32 (acx_device_t *adev, u32 slave_address) -+{ -+ u32 val; -+ -+ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); -+ udelay (10); -+ val = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ -+ return val; -+} -+ -+INLINE_IO void -+write_slavemem8 (acx_device_t *adev, u32 slave_address, u8 val) -+{ -+ u32 data; -+ u32 base; -+ int offset; -+ -+ /* -+ * Get the word containing the target address and the byte offset in that word. -+ */ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ data &= ~(0xff << offset); -+ data |= val << offset; -+ write_slavemem32 (adev, base, data); -+} -+ -+INLINE_IO u8 -+read_slavemem8 (acx_device_t *adev, u32 slave_address) -+{ -+ u8 val; -+ u32 base; -+ u32 data; -+ int offset; -+ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ -+ val = (data >> offset) & 0xff; -+ -+ return val; -+} -+ -+/* -+ * doesn't split across word boundaries -+ */ -+INLINE_IO void -+write_slavemem16 (acx_device_t *adev, u32 slave_address, u16 val) -+{ -+ u32 data; -+ u32 base; -+ int offset; -+ -+ /* -+ * Get the word containing the target address and the byte offset in that word. -+ */ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ data &= ~(0xffff << offset); -+ data |= val << offset; -+ write_slavemem32 (adev, base, data); -+} -+ -+/* -+ * doesn't split across word boundaries -+ */ -+INLINE_IO u16 -+read_slavemem16 (acx_device_t *adev, u32 slave_address) -+{ -+ u16 val; -+ u32 base; -+ u32 data; -+ int offset; -+ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ -+ val = (data >> offset) & 0xffff; -+ -+ return val; -+} -+ -+/* -+ * Copy from slave memory -+ * -+ * TODO - rewrite using address autoincrement, handle partial words -+ */ -+void -+copy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) { -+ u32 tmp = 0; -+ u8 *ptmp = (u8 *) &tmp; -+ -+ /* -+ * Right now I'm making the assumption that the destination is aligned, but -+ * I'd better check. -+ */ -+ if ((u32) destination & 3) { -+ printk ("acx copy_from_slavemem: warning! destination not word-aligned!\n"); -+ } -+ -+ while (count >= 4) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); -+ udelay (10); -+ *((u32 *) destination) = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ count -= 4; -+ source += 4; -+ destination += 4; -+ } -+ -+ /* -+ * If the word reads above didn't satisfy the count, read one more word -+ * and transfer a byte at a time until the request is satisfied. -+ */ -+ if (count) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); -+ udelay (10); -+ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ while (count--) { -+ *destination++ = *ptmp++; -+ } -+ } -+} -+ -+/* -+ * Copy to slave memory -+ * -+ * TODO - rewrite using autoincrement, handle partial words -+ */ -+void -+copy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) -+{ -+ u32 tmp = 0; -+ u8* ptmp = (u8 *) &tmp; -+ static u8 src[512]; /* make static to avoid huge stack objects */ -+ -+ /* -+ * For now, make sure the source is word-aligned by copying it to a word-aligned -+ * buffer. Someday rewrite to avoid the extra copy. -+ */ -+ if (count > sizeof (src)) { -+ printk ("acx copy_to_slavemem: Warning! buffer overflow!\n"); -+ count = sizeof (src); -+ } -+ memcpy (src, source, count); -+ source = src; -+ -+ while (count >= 4) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, *((u32 *) source)); -+ count -= 4; -+ source += 4; -+ destination += 4; -+ } -+ -+ /* -+ * If there are leftovers read the next word from the acx and merge in -+ * what they want to write. -+ */ -+ if (count) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ while (count--) { -+ *ptmp++ = *source++; -+ } -+ /* -+ * reset address in case we're currently in auto-increment mode -+ */ -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, tmp); -+ udelay (10); -+ } -+ -+} -+ -+/* -+ * Block copy to slave buffers using memory block chain mode. Copies to the ACX -+ * transmit buffer structure with minimal intervention on our part. -+ * Interrupts should be disabled when calling this. -+ */ -+void -+chaincopy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) -+{ -+ u32 val; -+ u32 *data = (u32 *) source; -+ static u8 aligned_source[WLAN_A4FR_MAXLEN_WEP_FCS]; -+ -+ /* -+ * Warn if the pointers don't look right. Destination must fit in [23:5] with -+ * zero elsewhere and source should be 32 bit aligned. -+ * This should never happen since we're in control of both, but I want to know about -+ * it if it does. -+ */ -+ if ((destination & 0x00ffffe0) != destination) { -+ printk ("acx chaincopy: destination block 0x%04x not aligned!\n", destination); -+ } -+ if (count > sizeof aligned_source) { -+ printk( KERN_ERR "chaincopy_to_slavemem overflow!\n" ); -+ count = sizeof aligned_source; -+ } -+ if ((u32) source & 3) { -+ memcpy (aligned_source, source, count); -+ data = (u32 *) aligned_source; -+ } -+ -+ /* -+ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment -+ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word -+ */ -+ val = 2 << 16 | 1 << 2; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); -+ -+ /* -+ * SLV_MEM_CP[23:5] = start of 1st block -+ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 -+ */ -+ val = destination & 0x00ffffe0; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); -+ -+ /* -+ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] -+ */ -+ val = (destination & 0x00ffffe0) + (1<<2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); -+ -+ /* -+ * Write the data to the slave data register, rounding up to the end -+ * of the word containing the last byte (hence the > 0) -+ */ -+ while (count > 0) { -+ writel (*data++, &adev->iobase[ACX_SLV_MEM_DATA]); -+ count -= 4; -+ } -+} -+ -+ -+/* -+ * Block copy from slave buffers using memory block chain mode. Copies from the ACX -+ * receive buffer structures with minimal intervention on our part. -+ * Interrupts should be disabled when calling this. -+ */ -+void -+chaincopy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) -+{ -+ u32 val; -+ u32 *data = (u32 *) destination; -+ static u8 aligned_destination[WLAN_A4FR_MAXLEN_WEP_FCS]; -+ int saved_count = count; -+ -+ /* -+ * Warn if the pointers don't look right. Destination must fit in [23:5] with -+ * zero elsewhere and source should be 32 bit aligned. -+ * Turns out the network stack sends unaligned things, so fix them before -+ * copying to the ACX. -+ */ -+ if ((source & 0x00ffffe0) != source) { -+ printk ("acx chaincopy: source block 0x%04x not aligned!\n", source); -+ dump_acxmem (adev, 0, 0x10000); -+ } -+ if ((u32) destination & 3) { -+ //printk ("acx chaincopy: data destination not word aligned!\n"); -+ data = (u32 *) aligned_destination; -+ if (count > sizeof aligned_destination) { -+ printk( KERN_ERR "chaincopy_from_slavemem overflow!\n" ); -+ count = sizeof aligned_destination; -+ } -+ } -+ -+ /* -+ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment -+ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word -+ */ -+ val = (2 << 16) | (1 << 2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); -+ -+ /* -+ * SLV_MEM_CP[23:5] = start of 1st block -+ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 -+ */ -+ val = source & 0x00ffffe0; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); -+ -+ /* -+ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] -+ */ -+ val = (source & 0x00ffffe0) + (1<<2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); -+ -+ /* -+ * Read the data from the slave data register, rounding up to the end -+ * of the word containing the last byte (hence the > 0) -+ */ -+ while (count > 0) { -+ *data++ = readl (&adev->iobase[ACX_SLV_MEM_DATA]); -+ count -= 4; -+ } -+ -+ /* -+ * If the destination wasn't aligned, we would have saved it in -+ * the aligned buffer, so copy it where it should go. -+ */ -+ if ((u32) destination & 3) { -+ memcpy (destination, aligned_destination, saved_count); -+ } -+} -+ -+char -+printable (char c) -+{ -+ return ((c >= 20) && (c < 127)) ? c : '.'; -+} -+ -+#if DUMP_MEM_DEFINED > 0 -+static void -+dump_acxmem (acx_device_t *adev, u32 start, int length) -+{ -+ int i; -+ u8 buf[16]; -+ -+ while (length > 0) { -+ printk ("%04x ", start); -+ copy_from_slavemem (adev, buf, start, 16); -+ for (i = 0; (i < 16) && (i < length); i++) { -+ printk ("%02x ", buf[i]); -+ } -+ for (i = 0; (i < 16) && (i < length); i++) { -+ printk ("%c", printable (buf[i])); -+ } -+ printk ("\n"); -+ start += 16; -+ length -= 16; -+ } -+} -+#endif -+ -+static void -+enable_acx_irq(acx_device_t *adev); -+static void -+disable_acx_irq(acx_device_t *adev); -+ -+/* -+ * Return an acx pointer to the next transmit data block. -+ */ -+u32 -+allocate_acx_txbuf_space (acx_device_t *adev, int count) { -+ u32 block, next, last_block; -+ int blocks_needed; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&adev->txbuf_lock, flags); -+ /* -+ * Take 4 off the memory block size to account for the reserved word at the start of -+ * the block. -+ */ -+ blocks_needed = count / (adev->memblocksize - 4); -+ if (count % (adev->memblocksize - 4)) -+ blocks_needed++; -+ -+ if (blocks_needed <= adev->acx_txbuf_blocks_free) { -+ /* -+ * Take blocks at the head of the free list. -+ */ -+ last_block = block = adev->acx_txbuf_free; -+ -+ /* -+ * Follow block pointers through the requested number of blocks both to -+ * find the new head of the free list and to set the flags for the blocks -+ * appropriately. -+ */ -+ while (blocks_needed--) { -+ /* -+ * Keep track of the last block of the allocation -+ */ -+ last_block = adev->acx_txbuf_free; -+ -+ /* -+ * Make sure the end control flag is not set. -+ */ -+ next = read_slavemem32 (adev, adev->acx_txbuf_free) & 0x7ffff; -+ write_slavemem32 (adev, adev->acx_txbuf_free, next); -+ -+ /* -+ * Update the new head of the free list -+ */ -+ adev->acx_txbuf_free = next << 5; -+ adev->acx_txbuf_blocks_free--; -+ -+ } -+ -+ /* -+ * Flag the last block both by clearing out the next pointer -+ * and marking the control field. -+ */ -+ write_slavemem32 (adev, last_block, 0x02000000); -+ -+ /* -+ * If we're out of buffers make sure the free list pointer is NULL -+ */ -+ if (!adev->acx_txbuf_blocks_free) { -+ adev->acx_txbuf_free = 0; -+ } -+ } -+ else { -+ block = 0; -+ } -+ spin_unlock_irqrestore (&adev->txbuf_lock, flags); -+ return block; -+} -+ -+/* -+ * Return buffer space back to the pool by following the next pointers until we find -+ * the block marked as the end. Point the last block to the head of the free list, -+ * then update the head of the free list to point to the newly freed memory. -+ * This routine gets called in interrupt context, so it shouldn't block to protect -+ * the integrity of the linked list. The ISR already holds the lock. -+ */ -+void -+reclaim_acx_txbuf_space (acx_device_t *adev, u32 blockptr) { -+ u32 cur, last, next; -+ unsigned long flags; -+ -+ spin_lock_irqsave (&adev->txbuf_lock, flags); -+ if ((blockptr >= adev->acx_txbuf_start) && -+ (blockptr <= adev->acx_txbuf_start + -+ (adev->acx_txbuf_numblocks - 1) * adev->memblocksize)) { -+ cur = blockptr; -+ do { -+ last = cur; -+ next = read_slavemem32 (adev, cur); -+ -+ /* -+ * Advance to the next block in this allocation -+ */ -+ cur = (next & 0x7ffff) << 5; -+ -+ /* -+ * This block now counts as free. -+ */ -+ adev->acx_txbuf_blocks_free++; -+ } while (!(next & 0x02000000)); -+ -+ /* -+ * last now points to the last block of that allocation. Update the pointer -+ * in that block to point to the free list and reset the free list to the -+ * first block of the free call. If there were no free blocks, make sure -+ * the new end of the list marks itself as truly the end. -+ */ -+ if (adev->acx_txbuf_free) { -+ write_slavemem32 (adev, last, adev->acx_txbuf_free >> 5); -+ } -+ else { -+ write_slavemem32 (adev, last, 0x02000000); -+ } -+ adev->acx_txbuf_free = blockptr; -+ } -+ spin_unlock_irqrestore(&adev->txbuf_lock, flags); -+} -+ -+/* -+ * Initialize the pieces managing the transmit buffer pool on the ACX. The transmit -+ * buffer is a circular queue with one 32 bit word reserved at the beginning of each -+ * block. The upper 13 bits are a control field, of which only 0x02000000 has any -+ * meaning. The lower 19 bits are the address of the next block divided by 32. -+ */ -+void -+init_acx_txbuf (acx_device_t *adev) { -+ -+ /* -+ * acx100_s_init_memory_pools set up txbuf_start and txbuf_numblocks for us. -+ * All we need to do is reset the rest of the bookeeping. -+ */ -+ -+ adev->acx_txbuf_free = adev->acx_txbuf_start; -+ adev->acx_txbuf_blocks_free = adev->acx_txbuf_numblocks; -+ -+ /* -+ * Initialization leaves the last transmit pool block without a pointer back to -+ * the head of the list, but marked as the end of the list. That's how we want -+ * to see it, too, so leave it alone. This is only ever called after a firmware -+ * reset, so the ACX memory is in the state we want. -+ */ -+ -+} -+ -+INLINE_IO int -+adev_present(acx_device_t *adev) -+{ -+ /* fast version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should be safe): */ -+ return readl(adev->iobase) != 0xffffffff; -+} -+ -+/*********************************************************************** -+*/ -+static inline txdesc_t* -+get_txdesc(acx_device_t *adev, int index) -+{ -+ return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size); -+} -+ -+static inline txdesc_t* -+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc) -+{ -+ return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size); -+} -+ -+static txhostdesc_t* -+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return &adev->txhostdesc_start[index*2]; -+} -+ -+static inline client_t* -+get_txc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return adev->txc[index]; -+} -+ -+static inline u16 -+get_txr(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ index /= adev->txdesc_size; -+ return adev->txr[index]; -+} -+ -+static inline void -+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ adev->txc[index] = c; -+ adev->txr[index] = r111; -+} -+ -+ -+/*********************************************************************** -+** EEPROM and PHY read/write helpers -+*/ -+/*********************************************************************** -+** acxmem_read_eeprom_byte -+** -+** Function called to read an octet in the EEPROM. -+** -+** This function is used by acxmem_e_probe to check if the -+** connected card is a legal one or not. -+** -+** Arguments: -+** adev ptr to acx_device structure -+** addr address to read in the EEPROM -+** charbuf ptr to a char. This is where the read octet -+** will be stored -+*/ -+int -+acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf) -+{ -+ int result; -+ int count; -+ -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for EEPROM read\n", -+ adev->ndev->name); -+ result = NOT_OK; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ *charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA); -+ log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf); -+ result = OK; -+ -+fail: -+ return result; -+} -+ -+ -+/*********************************************************************** -+** We don't lock hw accesses here since we never r/w eeprom in IRQ -+** Note: this function sleeps only because of GFP_KERNEL alloc -+*/ -+#ifdef UNUSED -+int -+acxmem_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf) -+{ -+ u8 *data_verify = NULL; -+ unsigned long flags; -+ int count, i; -+ int result = NOT_OK; -+ u16 gpio_orig; -+ -+ printk("acx: WARNING! I would write to EEPROM now. " -+ "Since I really DON'T want to unless you know " -+ "what you're doing (THIS CODE WILL PROBABLY " -+ "NOT WORK YET!), I will abort that now. And " -+ "definitely make sure to make a " -+ "/proc/driver/acx_wlan0_eeprom backup copy first!!! " -+ "(the EEPROM content includes the PCI config header!! " -+ "If you kill important stuff, then you WILL " -+ "get in trouble and people DID get in trouble already)\n"); -+ return OK; -+ -+ FN_ENTER; -+ -+ data_verify = kmalloc(len, GFP_KERNEL); -+ if (!data_verify) { -+ goto end; -+ } -+ -+ /* first we need to enable the OE (EEPROM Output Enable) GPIO line -+ * to be able to write to the EEPROM. -+ * NOTE: an EEPROM writing success has been reported, -+ * but you probably have to modify GPIO_OUT, too, -+ * and you probably need to activate a different GPIO -+ * line instead! */ -+ gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE); -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1); -+ write_flush(adev); -+ -+ /* ok, now start writing the data out */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i)); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 1); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("WARNING, DANGER!!! " -+ "Timeout waiting for EEPROM write\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ } -+ -+ /* disable EEPROM writing */ -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig); -+ write_flush(adev); -+ -+ /* now start a verification run */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("timeout waiting for EEPROM read\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ -+ data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA); -+ } -+ -+ if (0 == memcmp(charbuf, data_verify, len)) -+ result = OK; /* read data matches, success */ -+ -+end: -+ kfree(data_verify); -+ FN_EXIT1(result); -+ return result; -+} -+#endif /* UNUSED */ -+ -+ -+/*********************************************************************** -+** acxmem_s_read_phy_reg -+** -+** Messing with rx/tx disabling and enabling here -+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic -+*/ -+int -+acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) -+{ -+ int result = NOT_OK; -+ int count; -+ -+ FN_ENTER; -+ -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg32(adev, IO_ACX_PHY_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for phy read\n", -+ adev->ndev->name); -+ *charbuf = 0; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ log(L_DEBUG, "count was %u\n", count); -+ *charbuf = read_reg8(adev, IO_ACX_PHY_DATA); -+ -+ log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg); -+ result = OK; -+ goto fail; /* silence compiler warning */ -+fail: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) -+{ -+ int count; -+ FN_ENTER; -+ -+ /* mprusko said that 32bit accesses result in distorted sensitivity -+ * on his card. Unconfirmed, looks like it's not true (most likely since we -+ * now properly flush writes). */ -+ write_reg32(adev, IO_ACX_PHY_DATA, value); -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 1); -+ write_flush(adev); -+ -+ count = 0xffff; -+ while (read_reg32(adev, IO_ACX_PHY_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for phy read\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg); -+ fail: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+#define NO_AUTO_INCREMENT 1 -+ -+/*********************************************************************** -+** acxmem_s_write_fw -+** -+** Write the firmware image into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** 1 firmware image corrupted -+** 0 success -+*/ -+static int -+acxmem_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset) -+{ -+ int len, size, checkMismatch = -1; -+ u32 sum, v32, tmp, id; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+ write_flush(adev); -+#endif -+#endif -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ sum += p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ len += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+ write_flush(adev); -+#endif -+ write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32); -+ write_flush(adev); -+#endif -+ write_slavemem32 (adev, offset + len - 4, v32); -+ -+ id = read_id_register (adev); -+ -+ /* -+ * check the data written -+ */ -+ tmp = read_slavemem32 (adev, offset + len - 4); -+ if (checkMismatch && (tmp != v32)) { -+ printk ("first data mismatch at 0x%08x good 0x%08x bad 0x%08x id 0x%08x\n", -+ offset + len - 4, v32, tmp, id); -+ checkMismatch = 0; -+ } -+ } -+ log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n", -+ size, sum, le32_to_cpu(fw_image->chksum)); -+ -+ /* compare our checksum with the stored image checksum */ -+ return (sum != le32_to_cpu(fw_image->chksum)); -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_validate_fw -+** -+** Compare the firmware image given with -+** the firmware image written into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** NOT_OK firmware image corrupted or not correctly written -+** OK success -+*/ -+static int -+acxmem_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image, -+ u32 offset) -+{ -+ u32 sum, v32, w32; -+ int len, size; -+ int result = OK; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+#endif -+ -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ p += 4; -+ len += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+#endif -+ udelay(10); -+ w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA); -+#endif -+ w32 = read_slavemem32 (adev, offset + len - 4); -+ -+ if (unlikely(w32 != v32)) { -+ printk("acx: FATAL: firmware upload: " -+ "data parts at offset %d don't match\n(0x%08X vs. 0x%08X)!\n" -+ "I/O timing issues or defective memory, with DWL-xx0+? " -+ "ACX_IO_WIDTH=16 may help. Please report\n", -+ len, v32, w32); -+ result = NOT_OK; -+ break; -+ } -+ -+ sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24); -+ } -+ -+ /* sum control verification */ -+ if (result != NOT_OK) { -+ if (sum != le32_to_cpu(fw_image->chksum)) { -+ printk("acx: FATAL: firmware upload: " -+ "checksums don't match!\n"); -+ result = NOT_OK; -+ } -+ } -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_upload_fw -+** -+** Called from acx_reset_dev -+*/ -+static int -+acxmem_s_upload_fw(acx_device_t *adev) -+{ -+ firmware_image_t *fw_image = NULL; -+ int res = NOT_OK; -+ int try; -+ u32 file_size; -+ char *filename = "WLANGEN.BIN"; -+#ifdef PATCH_AROUND_BAD_SPOTS -+ u32 offset; -+ int i; -+ /* -+ * arm-linux-objdump -d patch.bin, or -+ * od -Ax -t x4 patch.bin after finding the bounds -+ * of the .text section with arm-linux-objdump -s patch.bin -+ */ -+ u32 patch[] = { -+ 0xe584c030, 0xe59fc008, -+ 0xe92d1000, 0xe59fc004, 0xe8bd8000, 0x0000080c, -+ 0x0000aa68, 0x605a2200, 0x2c0a689c, 0x2414d80a, -+ 0x2f00689f, 0x1c27d007, 0x06241e7c, 0x2f000e24, -+ 0xe000d1f6, 0x602e6018, 0x23036468, 0x480203db, -+ 0x60ca6003, 0xbdf0750a, 0xffff0808 -+ }; -+#endif -+ -+ FN_ENTER; -+ /* No combined image; tell common we need the radio firmware, too */ -+ adev->need_radio_fw = 1; -+ -+ fw_image = acx_s_read_fw(adev->dev, filename, &file_size); -+ if (!fw_image) { -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+ } -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxmem_s_write_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_write_fw (main): %d\n", res); -+ if (OK == res) { -+ res = acxmem_s_validate_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_validate_fw " -+ "(main): %d\n", res); -+ } -+ -+ if (OK == res) { -+ SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED); -+ break; -+ } -+ printk("acx: firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+#ifdef PATCH_AROUND_BAD_SPOTS -+ /* -+ * Only want to do this if the firmware is exactly what we expect for an -+ * iPaq 4700; otherwise, bad things would ensue. -+ */ -+ if ((HX4700_FIRMWARE_CHECKSUM == fw_image->chksum) || -+ (HX4700_ALTERNATE_FIRMWARE_CHECKSUM == fw_image->chksum)) { -+ /* -+ * Put the patch after the main firmware image. 0x950c contains -+ * the ACX's idea of the end of the firmware. Use that location to -+ * load ours (which depends on that location being 0xab58) then -+ * update that location to point to after ours. -+ */ -+ -+ offset = read_slavemem32 (adev, 0x950c); -+ -+ log (L_DEBUG, "acx: patching in at 0x%04x\n", offset); -+ -+ for (i = 0; i < sizeof(patch) / sizeof(patch[0]); i++) { -+ write_slavemem32 (adev, offset, patch[i]); -+ offset += sizeof(u32); -+ } -+ -+ /* -+ * Patch the instruction at 0x0804 to branch to our ARM patch at 0xab58 -+ */ -+ write_slavemem32 (adev, 0x0804, 0xea000000 + (0xab58-0x0804-8)/4); -+ -+ /* -+ * Patch the instructions at 0x1f40 to branch to our Thumb patch at 0xab74 -+ * -+ * 4a00 ldr r2, [pc, #0] -+ * 4710 bx r2 -+ * .data 0xab74+1 -+ */ -+ write_slavemem32 (adev, 0x1f40, 0x47104a00); -+ write_slavemem32 (adev, 0x1f44, 0x0000ab74+1); -+ -+ /* -+ * Bump the end of the firmware up to beyond our patch. -+ */ -+ write_slavemem32 (adev, 0x950c, offset); -+ -+ } -+#endif -+ -+ vfree(fw_image); -+ -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_upload_radio -+** -+** Uploads the appropriate radio module firmware into the card. -+*/ -+int -+acxmem_s_upload_radio(acx_device_t *adev) -+{ -+ acx_ie_memmap_t mm; -+ firmware_image_t *radio_image; -+ acx_cmd_radioinit_t radioinit; -+ int res = NOT_OK; -+ int try; -+ u32 offset; -+ u32 size; -+ char filename[sizeof("RADIONN.BIN")]; -+ -+ if (!adev->need_radio_fw) return OK; -+ -+ FN_ENTER; -+ -+ acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+ offset = le32_to_cpu(mm.CodeEnd); -+ -+ snprintf(filename, sizeof(filename), "RADIO%02x.BIN", -+ adev->radio_type); -+ radio_image = acx_s_read_fw(adev->dev, filename, &size); -+ if (!radio_image) { -+ printk("acx: can't load radio module '%s'\n", filename); -+ goto fail; -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxmem_s_write_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res); -+ if (OK == res) { -+ res = acxmem_s_validate_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res); -+ } -+ -+ if (OK == res) -+ break; -+ printk("acx: radio firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); -+ radioinit.offset = cpu_to_le32(offset); -+ -+ /* no endian conversion needed, remains in card CPU area: */ -+ radioinit.len = radio_image->size; -+ -+ vfree(radio_image); -+ -+ if (OK != res) -+ goto fail; -+ -+ /* will take a moment so let's have a big timeout */ -+ acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT, -+ &radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000)); -+ -+ res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+ -+fail: -+ FN_EXIT1(res); -+ return res; -+} -+ -+/*********************************************************************** -+** acxmem_l_reset_mac -+** -+** MAC will be reset -+** Call context: reset_dev -+*/ -+static void -+acxmem_l_reset_mac(acx_device_t *adev) -+{ -+ int count; -+ FN_ENTER; -+ -+ /* halt eCPU */ -+ set_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); -+ -+ /* now do soft reset of eCPU, set bit */ -+ set_regbits (adev, IO_ACX_SOFT_RESET, 0x1); -+ log(L_DEBUG, "%s: enable soft reset...\n", __func__); -+ -+ /* Windows driver sleeps here for a while with this sequence */ -+ for (count = 0; count < 200; count++) { -+ udelay (50); -+ } -+ -+ /* now clear bit again: deassert eCPU reset */ -+ log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__); -+ clear_regbits (adev, IO_ACX_SOFT_RESET, 0x1); -+ -+ /* now start a burst read from initial EEPROM */ -+ set_regbits (adev, IO_ACX_EE_START, 0x1); -+ -+ /* -+ * Windows driver sleeps here for a while with this sequence -+ */ -+ for (count = 0; count < 200; count++) { -+ udelay (50); -+ } -+ -+ /* Windows driver writes 0x10000 to register 0x808 here */ -+ -+ write_reg32 (adev, 0x808, 0x10000); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_verify_init -+*/ -+static int -+acxmem_s_verify_init(acx_device_t *adev) -+{ -+ int result = NOT_OK; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ timeout = jiffies + 2*HZ; -+ for (;;) { -+ u32 irqstat = read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if ((irqstat != 0xFFFFFFFF) && (irqstat & HOST_INT_FCS_THRESHOLD)) { -+ result = OK; -+ write_reg32(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD); -+ break; -+ } -+ if (time_after(jiffies, timeout)) -+ break; -+ /* Init may take up to ~0.5 sec total */ -+ acx_s_msleep(50); -+ } -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** A few low-level helpers -+** -+** Note: these functions are not protected by lock -+** and thus are never allowed to be called from IRQ. -+** Also they must not race with fw upload which uses same hw regs -+*/ -+ -+/*********************************************************************** -+** acxmem_write_cmd_type_status -+*/ -+ -+static inline void -+acxmem_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status) -+{ -+ write_slavemem32 (adev, (u32) adev->cmd_area, type | (status << 16)); -+ write_flush(adev); -+} -+ -+ -+/*********************************************************************** -+** acxmem_read_cmd_type_status -+*/ -+static u32 -+acxmem_read_cmd_type_status(acx_device_t *adev) -+{ -+ u32 cmd_type, cmd_status; -+ -+ cmd_type = read_slavemem32 (adev, (u32) adev->cmd_area); -+ -+ cmd_status = (cmd_type >> 16); -+ cmd_type = (u16)cmd_type; -+ -+ log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n", -+ cmd_type, cmd_status, -+ acx_cmd_status_str(cmd_status)); -+ -+ return cmd_status; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_reset_dev -+** -+** Arguments: -+** netdevice that contains the adev variable -+** Returns: -+** NOT_OK on fail -+** OK on success -+** Side effects: -+** device is hard reset -+** Call context: -+** acxmem_e_probe -+** Comment: -+** This resets the device using low level hardware calls -+** as well as uploads and verifies the firmware to the card -+*/ -+ -+static inline void -+init_mboxes(acx_device_t *adev) -+{ -+ u32 cmd_offs, info_offs; -+ -+ cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS); -+ info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS); -+ adev->cmd_area = (u8*) cmd_offs; -+ adev->info_area = (u8*) info_offs; -+ /* -+ log(L_DEBUG, "iobase2=%p\n" -+ */ -+ log( L_DEBUG, "cmd_mbox_offset=%X cmd_area=%p\n" -+ "info_mbox_offset=%X info_area=%p\n", -+ cmd_offs, adev->cmd_area, -+ info_offs, adev->info_area); -+} -+ -+ -+static inline void -+read_eeprom_area(acx_device_t *adev) -+{ -+#if ACX_DEBUG > 1 -+ int offs; -+ u8 tmp; -+ -+ for (offs = 0x8c; offs < 0xb9; offs++) -+ acxmem_read_eeprom_byte(adev, offs, &tmp); -+#endif -+} -+ -+static int -+acxmem_s_reset_dev(acx_device_t *adev) -+{ -+ const char* msg = ""; -+ unsigned long flags; -+ int result = NOT_OK; -+ u16 hardware_info; -+ u16 ecpu_ctrl; -+ int count; -+ u32 tmp; -+ -+ FN_ENTER; -+ /* -+ write_reg32 (adev, IO_ACX_SLV_MEM_CP, 0); -+ */ -+ /* reset the device to make sure the eCPU is stopped -+ * to upload the firmware correctly */ -+ -+ acx_lock(adev, flags); -+ -+ /* Windows driver does some funny things here */ -+ /* -+ * clear bit 0x200 in register 0x2A0 -+ */ -+ clear_regbits (adev, 0x2A0, 0x200); -+ -+ /* -+ * Set bit 0x200 in ACX_GPIO_OUT -+ */ -+ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); -+ -+ /* -+ * read register 0x900 until its value is 0x8400104C, sleeping -+ * in between reads if it's not immediate -+ */ -+ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); -+ count = 500; -+ while (count-- && (tmp != ACX_VENDOR_ID)) { -+ mdelay (10); -+ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); -+ } -+ -+ /* end what Windows driver does */ -+ -+ acxmem_l_reset_mac(adev); -+ -+ ecpu_ctrl = read_reg32(adev, IO_ACX_ECPU_CTRL) & 1; -+ if (!ecpu_ctrl) { -+ msg = "eCPU is already running. "; -+ goto end_unlock; -+ } -+ -+#ifdef WE_DONT_NEED_THAT_DO_WE -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) { -+ /* eCPU most likely means "embedded CPU" */ -+ msg = "eCPU did not start after boot from flash. "; -+ goto end_unlock; -+ } -+ -+ /* check sense on reset flags */ -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) { -+ printk("%s: eCPU did not start after boot (SOR), " -+ "is this fatal?\n", adev->ndev->name); -+ } -+#endif -+ /* scan, if any, is stopped now, setting corresponding IRQ bit */ -+ adev->irq_status |= HOST_INT_SCAN_COMPLETE; -+ -+ acx_unlock(adev, flags); -+ -+ /* need to know radio type before fw load */ -+ /* Need to wait for arrival of this information in a loop, -+ * most probably since eCPU runs some init code from EEPROM -+ * (started burst read in reset_mac()) which also -+ * sets the radio type ID */ -+ -+ count = 0xffff; -+ do { -+ hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION); -+ if (!--count) { -+ msg = "eCPU didn't indicate radio type"; -+ goto end_fail; -+ } -+ cpu_relax(); -+ } while (!(hardware_info & 0xff00)); /* radio type still zero? */ -+ printk("ACX radio type 0x%02x\n", (hardware_info >> 8) & 0xff); -+ /* printk("DEBUG: count %d\n", count); */ -+ adev->form_factor = hardware_info & 0xff; -+ adev->radio_type = hardware_info >> 8; -+ -+ /* load the firmware */ -+ if (OK != acxmem_s_upload_fw(adev)) -+ goto end_fail; -+ -+ /* acx_s_msleep(10); this one really shouldn't be required */ -+ -+ /* now start eCPU by clearing bit */ -+ clear_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); -+ log(L_DEBUG, "booted eCPU up and waiting for completion...\n"); -+ -+ /* Windows driver clears bit 0x200 in register 0x2A0 here */ -+ clear_regbits (adev, 0x2A0, 0x200); -+ -+ /* Windows driver sets bit 0x200 in ACX_GPIO_OUT here */ -+ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); -+ /* wait for eCPU bootup */ -+ if (OK != acxmem_s_verify_init(adev)) { -+ msg = "timeout waiting for eCPU. "; -+ goto end_fail; -+ } -+ log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n"); -+ init_mboxes(adev); -+ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); -+ -+ /* test that EEPROM is readable */ -+ read_eeprom_area(adev); -+ -+ result = OK; -+ goto end; -+ -+/* Finish error message. Indicate which function failed */ -+end_unlock: -+ acx_unlock(adev, flags); -+end_fail: -+ printk("acx: %sreset_dev() FAILED\n", msg); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_issue_cmd_timeo -+** -+** Sends command to fw, extract result -+** -+** NB: we do _not_ take lock inside, so be sure to not touch anything -+** which may interfere with IRQ handler operation -+** -+** TODO: busy wait is a bit silly, so: -+** 1) stop doing many iters - go to sleep after first -+** 2) go to waitqueue based approach: wait, not poll! -+*/ -+#undef FUNC -+#define FUNC "issue_cmd" -+ -+#if !ACX_DEBUG -+int -+acxmem_s_issue_cmd_timeo( -+ acx_device_t *adev, -+ unsigned int cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout) -+{ -+#else -+int -+acxmem_s_issue_cmd_timeo_debug( -+ acx_device_t *adev, -+ unsigned cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout, -+ const char* cmdstr) -+{ -+ unsigned long start = jiffies; -+#endif -+ const char *devname; -+ unsigned counter; -+ u16 irqtype; -+ int i, j; -+ u8 *p; -+ u16 cmd_status; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ devname = adev->ndev->name; -+ if (!devname || !devname[0] || devname[4]=='%') -+ devname = "acx"; -+ -+ log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n", -+ cmdstr, buflen, cmd_timeout, -+ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); -+ -+ if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) { -+ printk("%s: "FUNC"(): firmware is not loaded yet, " -+ "cannot execute commands!\n", devname); -+ goto bad; -+ } -+ -+ if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) { -+ printk("input buffer (len=%u):\n", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ -+ /* wait for firmware to become idle for our command submission */ -+ timeout = HZ/5; -+ counter = (timeout * 1000 / HZ) - 1; /* in ms */ -+ timeout += jiffies; -+ do { -+ cmd_status = acxmem_read_cmd_type_status(adev); -+ /* Test for IDLE state */ -+ if (!cmd_status) -+ break; -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ if (!counter) { -+ /* the card doesn't get idle, we're in trouble */ -+ printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n", -+ devname, cmd_status); -+#if DUMP_IF_SLOW > 0 -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("not idle"); -+#endif -+ goto bad; -+ } else if (counter < 190) { /* if waited >10ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. " -+ "Please report\n", 199 - counter); -+ } -+ -+ /* now write the parameters of the command if needed */ -+ if (buffer && buflen) { -+ /* if it's an INTERROGATE command, just pass the length -+ * of parameters to read, as data */ -+#if CMD_DISCOVERY -+ if (cmd == ACX1xx_CMD_INTERROGATE) -+ memset_io(adev->cmd_area + 4, 0xAA, buflen); -+#endif -+ /* -+ * slave memory version -+ */ -+ copy_to_slavemem (adev, (u32) (adev->cmd_area + 4), buffer, -+ (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen); -+ } -+ /* now write the actual command type */ -+ acxmem_write_cmd_type_status(adev, cmd, 0); -+ -+ /* clear CMD_COMPLETE bit. can be set only by IRQ handler: */ -+ adev->irq_status &= ~HOST_INT_CMD_COMPLETE; -+ -+ /* execute command */ -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD); -+ write_flush(adev); -+ -+ /* wait for firmware to process command */ -+ -+ /* Ensure nonzero and not too large timeout. -+ ** Also converts e.g. 100->99, 200->199 -+ ** which is nice but not essential */ -+ cmd_timeout = (cmd_timeout-1) | 1; -+ if (unlikely(cmd_timeout > 1199)) -+ cmd_timeout = 1199; -+ -+ /* we schedule away sometimes (timeout can be large) */ -+ counter = cmd_timeout; -+ timeout = jiffies + cmd_timeout * HZ / 1000; -+ do { -+ if (!adev->irqs_active) { /* IRQ disabled: poll */ -+ irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ write_reg16(adev, IO_ACX_IRQ_ACK, -+ HOST_INT_CMD_COMPLETE); -+ break; -+ } -+ } else { /* Wait when IRQ will set the bit */ -+ irqtype = adev->irq_status; -+ if (irqtype & HOST_INT_CMD_COMPLETE) -+ break; -+ } -+ -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ /* save state for debugging */ -+ cmd_status = acxmem_read_cmd_type_status(adev); -+ -+ /* put the card in IDLE state */ -+ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); -+ -+ if (!counter) { /* timed out! */ -+ printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. " -+ "irq bits:0x%04X irq_status:0x%04X timeout:%dms " -+ "cmd_status:%d (%s)\n", -+ devname, (adev->irqs_active) ? "waiting" : "polling", -+ irqtype, adev->irq_status, cmd_timeout, -+ cmd_status, acx_cmd_status_str(cmd_status)); -+ printk("%s: "FUNC"(): device irq status 0x%04x\n", -+ devname, read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES)); -+ printk("%s: "FUNC"(): IO_ACX_IRQ_MASK 0x%04x IO_ACX_FEMR 0x%04x\n", -+ devname, -+ read_reg16 (adev, IO_ACX_IRQ_MASK), -+ read_reg16 (adev, IO_ACX_FEMR)); -+ if (read_reg16 (adev, IO_ACX_IRQ_MASK) == 0xffff) { -+ printk ("acxmem: firmware probably hosed - reloading\n"); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+ { -+ pm_message_t state; -+ /* acxmem_e_suspend (resume_pdev, state); */ -+ acxmem_e_suspend (adev->ndev , state); -+ } -+#else -+ acxmem_e_suspend (adev, 0); -+#endif -+ { -+ resume_ndev = adev->ndev; -+ fw_resumer (NULL); -+ } -+ } -+ -+ goto bad; -+ } else if (cmd_timeout - counter > 30) { /* if waited >30ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. " -+ "count:%d. Please report\n", -+ (adev->irqs_active) ? "waited" : "polled", -+ cmd_timeout - counter, counter); -+ } -+ -+ if (1 != cmd_status) { /* it is not a 'Success' */ -+ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). " -+ "Took %dms of %d\n", -+ devname, cmd_status, acx_cmd_status_str(cmd_status), -+ cmd_timeout - counter, cmd_timeout); -+ /* zero out result buffer -+ * WARNING: this will trash stack in case of illegally large input -+ * length! */ -+ if (buflen > 388) { -+ /* -+ * 388 is maximum command length -+ */ -+ printk ("invalid length 0x%08x\n", buflen); -+ buflen = 388; -+ } -+ p = (u8 *) buffer; -+ for (i = 0; i < buflen; i+= 16) { -+ printk ("%04x:", i); -+ for (j = 0; (j < 16) && (i+j < buflen); j++) { -+ printk (" %02x", *p++); -+ } -+ printk ("\n"); -+ } -+ if (buffer && buflen) -+ memset(buffer, 0, buflen); -+ goto bad; -+ } -+ -+ /* read in result parameters if needed */ -+ if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) { -+ copy_from_slavemem (adev, buffer, (u32) (adev->cmd_area + 4), buflen); -+ if (acx_debug & L_DEBUG) { -+ printk("output buffer (len=%u): ", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ } -+ -+/* ok: */ -+ log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n", -+ cmdstr, jiffies - start); -+ FN_EXIT1(OK); -+ return OK; -+ -+bad: -+ /* Give enough info so that callers can avoid -+ ** printing their own diagnostic messages */ -+#if ACX_DEBUG -+ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); -+#else -+ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); -+#endif -+ dump_stack(); -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+#if defined(NONESSENTIAL_FEATURES) -+typedef struct device_id { -+ unsigned char id[6]; -+ char *descr; -+ char *type; -+} device_id_t; -+ -+static const device_id_t -+device_ids[] = -+{ -+ { -+ {'G', 'l', 'o', 'b', 'a', 'l'}, -+ NULL, -+ NULL, -+ }, -+ { -+ {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, -+ "uninitialized", -+ "SpeedStream SS1021 or Gigafast WF721-AEX" -+ }, -+ { -+ {0x80, 0x81, 0x82, 0x83, 0x84, 0x85}, -+ "non-standard", -+ "DrayTek Vigor 520" -+ }, -+ { -+ {'?', '?', '?', '?', '?', '?'}, -+ "non-standard", -+ "Level One WPC-0200" -+ }, -+ { -+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, -+ "empty", -+ "DWL-650+ variant" -+ } -+}; -+ -+static void -+acx_show_card_eeprom_id(acx_device_t *adev) -+{ -+ unsigned char buffer[CARD_EEPROM_ID_SIZE]; -+ int i; -+ -+ memset(&buffer, 0, CARD_EEPROM_ID_SIZE); -+ /* use direct EEPROM access */ -+ for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) { -+ if (OK != acxmem_read_eeprom_byte(adev, -+ ACX100_EEPROM_ID_OFFSET + i, -+ &buffer[i])) { -+ printk("acx: reading EEPROM FAILED\n"); -+ break; -+ } -+ } -+ -+ for (i = 0; i < VEC_SIZE(device_ids); i++) { -+ if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) { -+ if (device_ids[i].descr) { -+ printk("acx: EEPROM card ID string check " -+ "found %s card ID: is this %s?\n", -+ device_ids[i].descr, device_ids[i].type); -+ } -+ break; -+ } -+ } -+ if (i == VEC_SIZE(device_ids)) { -+ printk("acx: EEPROM card ID string check found " -+ "unknown card: expected 'Global', got '%.*s\'. " -+ "Please report\n", CARD_EEPROM_ID_SIZE, buffer); -+ } -+} -+#endif /* NONESSENTIAL_FEATURES */ -+ -+/*********************************************************************** -+** acxmem_free_desc_queues -+** -+** Releases the queues that have been allocated, the -+** others have been initialised to NULL so this -+** function can be used if only part of the queues were allocated. -+*/ -+ -+void -+acxmem_free_desc_queues(acx_device_t *adev) -+{ -+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \ -+ if (ptr) { \ -+ kfree(ptr); \ -+ ptr = NULL; \ -+ size = 0; \ -+ } -+ -+ FN_ENTER; -+ -+ ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy); -+ -+ adev->txdesc_start = NULL; -+ -+ ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy); -+ -+ adev->rxdesc_start = NULL; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_delete_dma_regions -+*/ -+static void -+acxmem_s_delete_dma_regions(acx_device_t *adev) -+{ -+ unsigned long flags; -+ -+ FN_ENTER; -+ /* disable radio Tx/Rx. Shouldn't we use the firmware commands -+ * here instead? Or are we that much down the road that it's no -+ * longer possible here? */ -+ /* -+ * slave memory interface really doesn't like this. -+ */ -+ /* -+ write_reg16(adev, IO_ACX_ENABLE, 0); -+ */ -+ -+ acx_s_msleep(100); -+ -+ acx_lock(adev, flags); -+ acxmem_free_desc_queues(adev); -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_probe -+** -+** Probe routine called when a PCI device w/ matching ID is found. -+** Here's the sequence: -+** - Allocate the PCI resources. -+** - Read the PCMCIA attribute memory to make sure we have a WLAN card -+** - Reset the MAC -+** - Initialize the dev and wlan data -+** - Initialize the MAC -+** -+** pdev - ptr to pci device structure containing info about pci configuration -+** id - ptr to the device id entry that matched this device -+*/ -+static const u16 -+IO_ACX100[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_END_CTL */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x007c, /* IO_ACX_INT_TRIG */ -+ 0x0098, /* IO_ACX_IRQ_MASK */ -+ 0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00ac, /* IO_ACX_IRQ_ACK */ -+ 0x00b0, /* IO_ACX_HINT_TRIG */ -+ -+ 0x0104, /* IO_ACX_ENABLE */ -+ -+ 0x0250, /* IO_ACX_EEPROM_CTL */ -+ 0x0254, /* IO_ACX_EEPROM_ADDR */ -+ 0x0258, /* IO_ACX_EEPROM_DATA */ -+ 0x025c, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0268, /* IO_ACX_PHY_ADDR */ -+ 0x026c, /* IO_ACX_PHY_DATA */ -+ 0x0270, /* IO_ACX_PHY_CTL */ -+ -+ 0x0290, /* IO_ACX_GPIO_OE */ -+ -+ 0x0298, /* IO_ACX_GPIO_OUT */ -+ -+ 0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x02ac, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x02d0, /* IO_ACX_EE_START */ -+ 0x02d4, /* IO_ACX_SOR_CFG */ -+ 0x02d8 /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static const u16 -+IO_ACX111[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_MEM_CP */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x00b4, /* IO_ACX_INT_TRIG */ -+ 0x00d4, /* IO_ACX_IRQ_MASK */ -+ /* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */ -+ 0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00e8, /* IO_ACX_IRQ_ACK */ -+ 0x00ec, /* IO_ACX_HINT_TRIG */ -+ -+ 0x01d0, /* IO_ACX_ENABLE */ -+ -+ 0x0338, /* IO_ACX_EEPROM_CTL */ -+ 0x033c, /* IO_ACX_EEPROM_ADDR */ -+ 0x0340, /* IO_ACX_EEPROM_DATA */ -+ 0x0344, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0350, /* IO_ACX_PHY_ADDR */ -+ 0x0354, /* IO_ACX_PHY_DATA */ -+ 0x0358, /* IO_ACX_PHY_CTL */ -+ -+ 0x0374, /* IO_ACX_GPIO_OE */ -+ -+ 0x037c, /* IO_ACX_GPIO_OUT */ -+ -+ 0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x0390, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x0100, /* IO_ACX_EE_START */ -+ 0x0104, /* IO_ACX_SOR_CFG */ -+ 0x0108, /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static void -+dummy_netdev_init(struct net_device *ndev) {} -+ -+/* -+ * Most of the acx specific pieces of hardware reset. -+ */ -+static int -+acxmem_complete_hw_reset (acx_device_t *adev) -+{ -+ acx111_ie_configoption_t co; -+ -+ /* NB: read_reg() reads may return bogus data before reset_dev(), -+ * since the firmware which directly controls large parts of the I/O -+ * registers isn't initialized yet. -+ * acx100 seems to be more affected than acx111 */ -+ if (OK != acxmem_s_reset_dev (adev)) -+ return -1; -+ -+ if (IS_ACX100(adev)) { -+ /* ACX100: configopt struct in cmd mailbox - directly after reset */ -+ copy_from_slavemem (adev, (u8*) &co, (u32) adev->cmd_area, sizeof (co)); -+ } -+ -+ if (OK != acx_s_init_mac(adev)) -+ return -3; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111: configopt struct needs to be queried after full init */ -+ acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS); -+ } -+ -+ /* -+ * Set up transmit buffer administration -+ */ -+ init_acx_txbuf (adev); -+ -+ /* -+ * Windows driver writes 0x01000000 to register 0x288, RADIO_CTL, if the form factor -+ * is 3. It also write protects the EEPROM by writing 1<<9 to GPIO_OUT -+ */ -+ if (adev->form_factor == 3) { -+ set_regbits (adev, 0x288, 0x01000000); -+ set_regbits (adev, 0x298, 1<<9); -+ } -+ -+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */ -+ if (OK != acxmem_read_eeprom_byte(adev, 0x05, &adev->eeprom_version)) -+ return -2; -+ -+ acx_s_parse_configoption(adev, &co); -+ acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */ -+ acx_display_hardware_details(adev); -+ -+ return 0; -+} -+ -+static int acx_init_netdev(struct net_device *ndev, struct device *dev, int base_addr, int addr_size, int irq) -+{ -+ const char *chip_name; -+ int result = -EIO; -+ int err; -+ u8 chip_type; -+ acx_device_t *adev = NULL; -+ -+ FN_ENTER; -+ -+ /* FIXME: prism54 calls pci_set_mwi() here, -+ * should we do/support the same? */ -+ -+ /* chiptype is u8 but id->driver_data is ulong -+ ** Works for now (possible values are 1 and 2) */ -+ chip_type = CHIPTYPE_ACX100; -+ /* acx100 and acx111 have different PCI memory regions */ -+ if (chip_type == CHIPTYPE_ACX100) { -+ chip_name = "ACX100"; -+ } else if (chip_type == CHIPTYPE_ACX111) { -+ chip_name = "ACX111"; -+ } else { -+ printk("acx: unknown chip type 0x%04X\n", chip_type); -+ goto fail_unknown_chiptype; -+ } -+ -+ printk("acx: found %s-based wireless network card\n", chip_name); -+ log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug); -+ -+ -+ dev_set_drvdata(dev, ndev); -+ -+ ether_setup(ndev); -+ -+ ndev->irq = irq; -+ -+ ndev->base_addr = base_addr; -+printk (KERN_INFO "memwinbase=%lx memwinsize=%u\n",memwin.Base,memwin.Size); -+ if (addr_size == 0 || ndev->irq == 0) -+ goto fail_hw_params; -+ ndev->open = &acxmem_e_open; -+ ndev->stop = &acxmem_e_close; -+ //pdev->dev.release = &acxmem_e_release; -+ ndev->hard_start_xmit = &acx_i_start_xmit; -+ ndev->get_stats = &acx_e_get_stats; -+#if IW_HANDLER_VERSION <= 5 -+ ndev->get_wireless_stats = &acx_e_get_wireless_stats; -+#endif -+ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -+ ndev->set_multicast_list = &acxmem_i_set_multicast_list; -+ ndev->tx_timeout = &acxmem_i_tx_timeout; -+ ndev->change_mtu = &acx_e_change_mtu; -+ ndev->watchdog_timeo = 4 * HZ; -+ -+ adev = ndev2adev(ndev); -+ spin_lock_init(&adev->lock); /* initial state: unlocked */ -+ spin_lock_init(&adev->txbuf_lock); -+ /* We do not start with downed sem: we want PARANOID_LOCKING to work */ -+ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ -+ /* since nobody can see new netdev yet, we can as well -+ ** just _presume_ that we're under sem (instead of actually taking it): */ -+ /* acx_sem_lock(adev); */ -+ adev->dev = dev; -+ adev->ndev = ndev; -+ adev->dev_type = DEVTYPE_MEM; -+ adev->chip_type = chip_type; -+ adev->chip_name = chip_name; -+ adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111; -+ adev->membase = (volatile u32 *) ndev->base_addr; -+ adev->iobase = (volatile u32 *) ioremap_nocache (ndev->base_addr, addr_size); -+ /* to find crashes due to weird driver access -+ * to unconfigured interface (ifup) */ -+ adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead; -+ -+#if defined(NONESSENTIAL_FEATURES) -+ acx_show_card_eeprom_id(adev); -+#endif /* NONESSENTIAL_FEATURES */ -+ -+#ifdef SET_MODULE_OWNER -+ SET_MODULE_OWNER(ndev); -+#endif -+ // need to fix that @@ -+ SET_NETDEV_DEV(ndev, dev); -+ -+ log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq); -+ -+ /* ok, pci setup is finished, now start initializing the card */ -+ -+ if (OK != acxmem_complete_hw_reset (adev)) -+ goto fail_reset; -+ -+ /* -+ * Set up default things for most of the card settings. -+ */ -+ acx_s_set_defaults(adev); -+ -+ /* Register the card, AFTER everything else has been set up, -+ * since otherwise an ioctl could step on our feet due to -+ * firmware operations happening in parallel or uninitialized data */ -+ err = register_netdev(ndev); -+ if (OK != err) { -+ printk("acx: register_netdev() FAILED: %d\n", err); -+ goto fail_register_netdev; -+ } -+ -+ acx_proc_register_entries(ndev); -+ -+ /* Now we have our device, so make sure the kernel doesn't try -+ * to send packets even though we're not associated to a network yet */ -+ acx_stop_queue(ndev, "on probe"); -+ acx_carrier_off(ndev, "on probe"); -+ -+ /* -+ * Set up a default monitor type so that poor combinations of initialization -+ * sequences in monitor mode don't end up destroying the hardware type. -+ */ -+ adev->monitor_type = ARPHRD_ETHER; -+ -+ /* -+ * Register to receive inetaddr notifier changes. This will allow us to -+ * catch if the user changes the MAC address of the interface. -+ */ -+ register_netdevice_notifier(&acx_netdev_notifier); -+ -+ /* after register_netdev() userspace may start working with dev -+ * (in particular, on other CPUs), we only need to up the sem */ -+ /* acx_sem_unlock(adev); */ -+ -+ printk("acx "ACX_RELEASE": net device %s, driver compiled " -+ "against wireless extensions %d and Linux %s\n", -+ ndev->name, WIRELESS_EXT, UTS_RELEASE); -+ -+#if CMD_DISCOVERY -+ great_inquisitor(adev); -+#endif -+ -+ result = OK; -+ goto done; -+ -+ /* error paths: undo everything in reverse order... */ -+ -+fail_register_netdev: -+ -+ acxmem_s_delete_dma_regions(adev); -+ -+fail_reset: -+fail_hw_params: -+ free_netdev(ndev); -+fail_unknown_chiptype: -+ -+ -+done: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_remove -+** -+** Shut device down (if not hot unplugged) -+** and deallocate PCI resources for the acx chip. -+** -+** pdev - ptr to PCI device structure containing info about pci configuration -+*/ -+static int __devexit -+acxmem_e_remove(struct pcmcia_device *link) -+{ -+ struct net_device *ndev; -+ acx_device_t *adev; -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ ndev = ((local_info_t*)link->priv)->ndev; -+ if (!ndev) { -+ log(L_DEBUG, "%s: card is unused. Skipping any release code\n", -+ __func__); -+ goto end; -+ } -+ -+ adev = ndev2adev(ndev); -+ -+ /* If device wasn't hot unplugged... */ -+ if (adev_present(adev)) { -+ -+ acx_sem_lock(adev); -+ -+ /* disable both Tx and Rx to shut radio down properly */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); -+ -+#ifdef REDUNDANT -+ /* put the eCPU to sleep to save power -+ * Halting is not possible currently, -+ * since not supported by all firmware versions */ -+ acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0); -+#endif -+ acx_lock(adev, flags); -+ -+ /* disable power LED to save power :-) */ -+ log(L_INIT, "switching off power LED to save power\n"); -+ acxmem_l_power_led(adev, 0); -+ -+ /* stop our eCPU */ -+ if (IS_ACX111(adev)) { -+ /* FIXME: does this actually keep halting the eCPU? -+ * I don't think so... -+ */ -+ acxmem_l_reset_mac(adev); -+ } else { -+ u16 temp; -+ -+ /* halt eCPU */ -+ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; -+ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); -+ write_flush(adev); -+ } -+ -+ acx_unlock(adev, flags); -+ -+ acx_sem_unlock(adev); -+ } -+ -+ -+ /* -+ * Unregister the notifier chain -+ */ -+ unregister_netdevice_notifier(&acx_netdev_notifier); -+ -+ /* unregister the device to not let the kernel -+ * (e.g. ioctls) access a half-deconfigured device -+ * NB: this will cause acxmem_e_close() to be called, -+ * thus we shouldn't call it under sem! */ -+ log(L_INIT, "removing device %s\n", ndev->name); -+ unregister_netdev(ndev); -+ -+ /* unregister_netdev ensures that no references to us left. -+ * For paranoid reasons we continue to follow the rules */ -+ acx_sem_lock(adev); -+ -+ if (adev->dev_state_mask & ACX_STATE_IFACE_UP) { -+ acxmem_s_down(ndev); -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ } -+ -+ acx_proc_unregister_entries(ndev); -+ -+ acxmem_s_delete_dma_regions(adev); -+ -+ /* finally, clean up PCI bus state */ -+ if (adev->iobase) iounmap((void *)adev->iobase); -+ -+ acx_sem_unlock(adev); -+ -+ /* Free netdev (quite late, -+ * since otherwise we might get caught off-guard -+ * by a netdev timeout handler execution -+ * expecting to see a working dev...) */ -+ free_netdev(ndev); -+ -+ printk ("e_remove done\n"); -+end: -+ FN_EXIT0; -+ -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** TODO: PM code needs to be fixed / debugged / tested. -+*/ -+#ifdef CONFIG_PM -+static int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+acxmem_e_suspend( struct net_device *ndev, pm_message_t state) -+#else -+acxmem_e_suspend( struct net_device *ndev, u32 state) -+#endif -+{ -+ FN_ENTER; -+ acx_device_t *adev; -+ printk("acx: suspend handler is experimental!\n"); -+ printk("sus: dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ goto end; -+ // @@ need to get it from link or something like that -+ adev = ndev2adev(ndev); -+ printk("sus: adev %p\n", adev); -+ -+ acx_sem_lock(adev); -+ -+ netif_device_detach(adev->ndev); /* this one cannot sleep */ -+ acxmem_s_down(adev->ndev); -+ /* down() does not set it to 0xffff, but here we really want that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ acxmem_s_delete_dma_regions(adev); -+ -+ /* -+ * Turn the ACX chip off. -+ */ -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+static void -+fw_resumer(struct work_struct *notused) -+{ -+ acx_device_t *adev; -+ struct net_device *ndev = resume_ndev; -+ -+ printk("acx: resume handler is experimental!\n"); -+ printk("rsm: got dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ return; -+ -+ adev = ndev2adev(ndev); -+ printk("rsm: got adev %p\n", adev); -+ -+ acx_sem_lock(adev); -+ -+ /* -+ * Turn on the ACX. -+ */ -+ -+ acxmem_complete_hw_reset (adev); -+ -+ /* -+ * done by acx_s_set_defaults for initial startup -+ */ -+ acxmem_set_interrupt_mask(adev); -+ -+ printk ("rsm: bringing up interface\n"); -+ SET_BIT (adev->set_mask, GETSET_ALL); -+ acxmem_s_up(ndev); -+ printk("rsm: acx up done\n"); -+ -+ /* now even reload all card parameters as they were before suspend, -+ * and possibly be back in the network again already :-) -+ */ -+ /* - most settings updated in acxmem_s_up() -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) { -+ adev->set_mask = GETSET_ALL; -+ acx_s_update_card_settings(adev); -+ printk("rsm: settings updated\n"); -+ } -+ */ -+ netif_device_attach(ndev); -+ printk("rsm: device attached\n"); -+ -+ acx_sem_unlock(adev); -+} -+ -+DECLARE_WORK( fw_resume_work, fw_resumer ); -+ -+static int -+acxmem_e_resume(struct pcmcia_device *link) -+{ -+ FN_ENTER; -+ -+ //resume_pdev = pdev; -+ schedule_work( &fw_resume_work ); -+ -+ FN_EXIT0; -+ return OK; -+} -+#endif /* CONFIG_PM */ -+ -+ -+/*********************************************************************** -+** acxmem_s_up -+** -+** This function is called by acxmem_e_open (when ifconfig sets the device as up) -+** -+** Side effects: -+** - Enables on-card interrupt requests -+** - calls acx_s_start -+*/ -+ -+static void -+enable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask); -+ write_reg16(adev, IO_ACX_FEMR, 0x8000); -+ adev->irqs_active = 1; -+ FN_EXIT0; -+} -+ -+static void -+acxmem_s_up(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ enable_acx_irq(adev); -+ acx_unlock(adev, flags); -+ -+ /* acx fw < 1.9.3.e has a hardware timer, and older drivers -+ ** used to use it. But we don't do that anymore, our OS -+ ** has reliable software timers */ -+ init_timer(&adev->mgmt_timer); -+ adev->mgmt_timer.function = acx_i_timer; -+ adev->mgmt_timer.data = (unsigned long)adev; -+ -+ /* Need to set ACX_STATE_IFACE_UP first, or else -+ ** timer won't be started by acx_set_status() */ -+ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ /* actual scan cmd will happen in start() */ -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); break; -+ case ACX_MODE_3_AP: -+ case ACX_MODE_MONITOR: -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break; -+ } -+ -+ acx_s_start(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_down -+** -+** This disables the netdevice -+** -+** Side effects: -+** - disables on-card interrupt request -+*/ -+ -+static void -+disable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ -+ /* I guess mask is not 0xffff because acx100 won't signal -+ ** cmd completion then (needed for ifup). -+ ** Someone with acx100 please confirm */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ adev->irqs_active = 0; -+ FN_EXIT0; -+} -+ -+static void -+acxmem_s_down(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ /* Disable IRQs first, so that IRQs cannot race with us */ -+ /* then wait until interrupts have finished executing on other CPUs */ -+ acx_lock(adev, flags); -+ disable_acx_irq(adev); -+ synchronize_irq(adev->pdev->irq); -+ acx_unlock(adev, flags); -+ -+ /* we really don't want to have an asynchronous tasklet disturb us -+ ** after something vital for its job has been shut down, so -+ ** end all remaining work now. -+ ** -+ ** NB: carrier_off (done by set_status below) would lead to -+ ** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK(). -+ ** That's why we do FLUSH first. -+ ** -+ ** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK() -+ ** waits for acx_e_after_interrupt_task to complete if it is running -+ ** on another CPU, but acx_e_after_interrupt_task -+ ** will sleep on sem forever, because it is taken by us! -+ ** Work around that by temporary sem unlock. -+ ** This will fail miserably if we'll be hit by concurrent -+ ** iwconfig or something in between. TODO! */ -+ acx_sem_unlock(adev); -+ FLUSH_SCHEDULED_WORK(); -+ acx_sem_lock(adev); -+ -+ /* This is possible: -+ ** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task -> -+ ** -> set_status(ASSOCIATED) -> wake_queue() -+ ** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK -+ ** lock/unlock is just paranoia, maybe not needed */ -+ acx_lock(adev, flags); -+ acx_stop_queue(ndev, "on ifdown"); -+ acx_set_status(adev, ACX_STATUS_0_STOPPED); -+ acx_unlock(adev, flags); -+ -+ /* kernel/timer.c says it's illegal to del_timer_sync() -+ ** a timer which restarts itself. We guarantee this cannot -+ ** ever happen because acx_i_timer() never does this if -+ ** status is ACX_STATUS_0_STOPPED */ -+ del_timer_sync(&adev->mgmt_timer); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_open -+** -+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP -+** from clear to set. In other words: ifconfig up. -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxmem_e_open(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = OK; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ acx_init_task_scheduler(adev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */ -+ -+#if 0 -+ /* request shared IRQ handler */ -+ if (request_irq(ndev->irq, acxmem_i_interrupt, SA_INTERRUPT, ndev->name, ndev)) { -+ printk("%s: request_irq FAILED\n", ndev->name); -+ result = -EAGAIN; -+ goto done; -+ } -+ set_irq_type (ndev->irq, IRQT_FALLING); -+ log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq); -+#endif -+ -+ /* ifup device */ -+ acxmem_s_up(ndev); -+ -+ /* We don't currently have to do anything else. -+ * The setup of the MAC should be subsequently completed via -+ * the mlme commands. -+ * Higher layers know we're ready from dev->start==1 and -+ * dev->tbusy==0. Our rx path knows to pass up received/ -+ * frames because of dev->flags&IFF_UP is true. -+ */ -+done: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_close -+** -+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP -+** from set to clear. I.e. called by "ifconfig DEV down" -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxmem_e_close(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* ifdown device */ -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ if (netif_device_present(ndev)) { -+ acxmem_s_down(ndev); -+ } -+ -+ /* disable all IRQs, release shared IRQ handler */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ free_irq(ndev->irq, ndev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */ -+ -+ /* We currently don't have to do anything else. -+ * Higher layers know we're not ready from dev->start==0 and -+ * dev->tbusy==1. Our rx path knows to not pass up received -+ * frames because of dev->flags&IFF_UP is false. -+ */ -+ acx_sem_unlock(adev); -+ -+ log(L_INIT, "closed device\n"); -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_tx_timeout -+** -+** Called from network core. Must not sleep! -+*/ -+static void -+acxmem_i_tx_timeout(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ unsigned int tx_num_cleaned; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* clean processed tx descs, they may have been completely full */ -+ tx_num_cleaned = acxmem_l_clean_txdesc(adev); -+ -+ /* nothing cleaned, yet (almost) no free buffers available? -+ * --> clean all tx descs, no matter which status!! -+ * Note that I strongly suspect that doing emergency cleaning -+ * may confuse the firmware. This is a last ditch effort to get -+ * ANYTHING to work again... -+ * -+ * TODO: it's best to simply reset & reinit hw from scratch... -+ */ -+ if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) { -+ printk("%s: FAILED to free any of the many full tx buffers. " -+ "Switching to emergency freeing. " -+ "Please report!\n", ndev->name); -+ acxmem_l_clean_txdesc_emergency(adev); -+ } -+ -+ if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status)) -+ acx_wake_queue(ndev, "after tx timeout"); -+ -+ /* stall may have happened due to radio drift, so recalib radio */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ -+ /* do unimportant work last */ -+ printk("%s: tx timeout!\n", ndev->name); -+ adev->stats.tx_errors++; -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_set_multicast_list -+** FIXME: most likely needs refinement -+*/ -+static void -+acxmem_i_set_multicast_list(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* firmwares don't have allmulti capability, -+ * so just use promiscuous mode instead in this case. */ -+ if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) { -+ SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ /* let kernel know in case *we* needed to set promiscuous */ -+ ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI); -+ } else { -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI); -+ } -+ -+ /* cannot update card settings directly here, atomic context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_l_process_rxdesc -+** -+** Called directly and only from the IRQ handler -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_rxbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_rxbuffer(const acx_device_t *adev) -+{ -+ register const struct rxhostdesc *rxhostdesc; -+ int i; -+ /* no FN_ENTER here, we don't want that */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ if (unlikely(!rxhostdesc)) return; -+ for (i = 0; i < RX_CNT; i++) { -+ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) -+ printk("rx: buf %d full\n", i); -+ rxhostdesc++; -+ } -+} -+#endif -+ -+static void -+acxmem_l_process_rxdesc(acx_device_t *adev) -+{ -+ register rxhostdesc_t *hostdesc; -+ register rxdesc_t *rxdesc; -+ unsigned count, tail; -+ u32 addr; -+ u8 Ctl_8; -+ -+ FN_ENTER; -+ -+ if (unlikely(acx_debug & L_BUFR)) -+ log_rxbuffer(adev); -+ -+ /* First, have a loop to determine the first descriptor that's -+ * full, just in case there's a mismatch between our current -+ * rx_tail and the full descriptor we're supposed to handle. */ -+ tail = adev->rx_tail; -+ count = RX_CNT; -+ while (1) { -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ rxdesc = &adev->rxdesc_start[tail]; -+ /* advance tail regardless of outcome of the below test */ -+ tail = (tail + 1) % RX_CNT; -+ -+ /* -+ * Unlike the PCI interface, where the ACX can write directly to -+ * the host descriptors, on the slave memory interface we have to -+ * pull these. All we really need to do is check the Ctl_8 field -+ * in the rx descriptor on the ACX, which should be 0x11000000 if -+ * we should process it. -+ */ -+ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ if ((Ctl_8 & DESC_CTL_HOSTOWN) && -+ (Ctl_8 & DESC_CTL_ACXDONE)) -+ break; /* found it! */ -+ -+ if (unlikely(!--count)) /* hmm, no luck: all descs empty, bail out */ -+ goto end; -+ } -+ -+ /* now process descriptors, starting with the first we figured out */ -+ while (1) { -+ log(L_BUFR, "rx: tail=%u Ctl_8=%02X\n", tail, Ctl_8); -+ /* -+ * If the ACX has CTL_RECLAIM set on this descriptor there -+ * is no buffer associated; it just wants us to tell it to -+ * reclaim the memory. -+ */ -+ if (!(Ctl_8 & DESC_CTL_RECLAIM)) { -+ -+ /* -+ * slave interface - pull data now -+ */ -+ hostdesc->length = read_slavemem16 (adev, (u32) &(rxdesc->total_length)); -+ -+ /* -+ * hostdesc->data is an rxbuffer_t, which includes header information, -+ * but the length in the data packet doesn't. The header information -+ * takes up an additional 12 bytes, so add that to the length we copy. -+ */ -+ addr = read_slavemem32 (adev, (u32) &(rxdesc->ACXMemPtr)); -+ if (addr) { -+ /* -+ * How can &(rxdesc->ACXMemPtr) above ever be zero? Looks like we -+ * get that now and then - try to trap it for debug. -+ */ -+ if (addr & 0xffff0000) { -+ printk("rxdesc 0x%08x\n", (u32) rxdesc); -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("Bad access!"); -+ } -+ chaincopy_from_slavemem (adev, (u8 *) hostdesc->data, addr, -+ hostdesc->length + -+ (u32) &((rxbuffer_t *)0)->hdr_a3); -+ acx_l_process_rxbuf(adev, hostdesc->data); -+ } -+ } -+ else { -+ printk ("rx reclaim only!\n"); -+ } -+ -+ hostdesc->Status = 0; -+ -+ /* -+ * Let the ACX know we're done. -+ */ -+ CLEAR_BIT (Ctl_8, DESC_CTL_HOSTOWN); -+ SET_BIT (Ctl_8, DESC_CTL_HOSTDONE); -+ SET_BIT (Ctl_8, DESC_CTL_RECLAIM); -+ write_slavemem8 (adev, (u32) &rxdesc->Ctl_8, Ctl_8); -+ -+ /* -+ * Now tell the ACX we've finished with the receive buffer so -+ * it can finish the reclaim. -+ */ -+ write_reg16 (adev, IO_ACX_INT_TRIG, INT_TRIG_RXPRC); -+ -+ /* ok, descriptor is handled, now check the next descriptor */ -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ rxdesc = &adev->rxdesc_start[tail]; -+ -+ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ -+ /* if next descriptor is empty, then bail out */ -+ if (!(Ctl_8 & DESC_CTL_HOSTOWN) || !(Ctl_8 & DESC_CTL_ACXDONE)) -+ break; -+ -+ tail = (tail + 1) % RX_CNT; -+ } -+end: -+ adev->rx_tail = tail; -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_interrupt -+** -+** IRQ handler (atomic context, must not sleep, blah, blah) -+*/ -+ -+/* scan is complete. all frames now on the receive queue are valid */ -+#define INFO_SCAN_COMPLETE 0x0001 -+#define INFO_WEP_KEY_NOT_FOUND 0x0002 -+/* hw has been reset as the result of a watchdog timer timeout */ -+#define INFO_WATCH_DOG_RESET 0x0003 -+/* failed to send out NULL frame from PS mode notification to AP */ -+/* recommended action: try entering 802.11 PS mode again */ -+#define INFO_PS_FAIL 0x0004 -+/* encryption/decryption process on a packet failed */ -+#define INFO_IV_ICV_FAILURE 0x0005 -+ -+/* Info mailbox format: -+2 bytes: type -+2 bytes: status -+more bytes may follow -+ rumors say about status: -+ 0x0000 info available (set by hw) -+ 0x0001 information received (must be set by host) -+ 0x1000 info available, mailbox overflowed (messages lost) (set by hw) -+ but in practice we've seen: -+ 0x9000 when we did not set status to 0x0001 on prev message -+ 0x1001 when we did set it -+ 0x0000 was never seen -+ conclusion: this is really a bitfield: -+ 0x1000 is 'info available' bit -+ 'mailbox overflowed' bit is 0x8000, not 0x1000 -+ value of 0x0000 probably means that there are no messages at all -+ P.S. I dunno how in hell hw is supposed to notice that messages are lost - -+ it does NOT clear bit 0x0001, and this bit will probably stay forever set -+ after we set it once. Let's hope this will be fixed in firmware someday -+*/ -+ -+static void -+handle_info_irq(acx_device_t *adev) -+{ -+#if ACX_DEBUG -+ static const char * const info_type_msg[] = { -+ "(unknown)", -+ "scan complete", -+ "WEP key not found", -+ "internal watchdog reset was done", -+ "failed to send powersave (NULL frame) notification to AP", -+ "encrypt/decrypt on a packet has failed", -+ "TKIP tx keys disabled", -+ "TKIP rx keys disabled", -+ "TKIP rx: key ID not found", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "TKIP IV value exceeds thresh" -+ }; -+#endif -+ u32 info_type, info_status; -+ -+ info_type = read_slavemem32 (adev, (u32) adev->info_area); -+ -+ info_status = (info_type >> 16); -+ info_type = (u16)info_type; -+ -+ /* inform fw that we have read this info message */ -+ write_slavemem32(adev, (u32) adev->info_area, info_type | 0x00010000); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK); -+ write_flush(adev); -+ -+ log(L_CTL, "info_type:%04X info_status:%04X\n", -+ info_type, info_status); -+ -+ log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n", -+ info_status, info_type, -+ info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ? -+ 0 : info_type] -+ ); -+} -+ -+ -+static void -+log_unusual_irq(u16 irqtype) { -+ /* -+ if (!printk_ratelimit()) -+ return; -+ */ -+ -+ printk("acx: got"); -+ if (irqtype & HOST_INT_TX_XFER) { -+ printk(" Tx_Xfer"); -+ } -+ if (irqtype & HOST_INT_RX_COMPLETE) { -+ printk(" Rx_Complete"); -+ } -+ if (irqtype & HOST_INT_DTIM) { -+ printk(" DTIM"); -+ } -+ if (irqtype & HOST_INT_BEACON) { -+ printk(" Beacon"); -+ } -+ if (irqtype & HOST_INT_TIMER) { -+ log(L_IRQ, " Timer"); -+ } -+ if (irqtype & HOST_INT_KEY_NOT_FOUND) { -+ printk(" Key_Not_Found"); -+ } -+ if (irqtype & HOST_INT_IV_ICV_FAILURE) { -+ printk(" IV_ICV_Failure (crypto)"); -+ } -+ /* HOST_INT_CMD_COMPLETE */ -+ /* HOST_INT_INFO */ -+ if (irqtype & HOST_INT_OVERFLOW) { -+ printk(" Overflow"); -+ } -+ if (irqtype & HOST_INT_PROCESS_ERROR) { -+ printk(" Process_Error"); -+ } -+ /* HOST_INT_SCAN_COMPLETE */ -+ if (irqtype & HOST_INT_FCS_THRESHOLD) { -+ printk(" FCS_Threshold"); -+ } -+ if (irqtype & HOST_INT_UNKNOWN) { -+ printk(" Unknown"); -+ } -+ printk(" IRQ(s)\n"); -+} -+ -+ -+static void -+update_link_quality_led(acx_device_t *adev) -+{ -+ int qual; -+ -+ qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise); -+ if (qual > adev->brange_max_quality) -+ qual = adev->brange_max_quality; -+ -+ if (time_after(jiffies, adev->brange_time_last_state_change + -+ (HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) { -+ acxmem_l_power_led(adev, (adev->brange_last_state == 0)); -+ adev->brange_last_state ^= 1; /* toggle */ -+ adev->brange_time_last_state_change = jiffies; -+ } -+} -+ -+ -+#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* a la orinoco.c */ -+ -+static irqreturn_t -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+acxmem_i_interrupt(int irq, void *dev_id) -+#else -+acxmwm_i_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+#endif -+{ -+ acx_device_t *adev; -+ unsigned long flags; -+ unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY; -+ register u16 irqtype; -+ u16 unmasked; -+ -+ adev = ndev2adev((struct net_device*)dev_id); -+ -+ /* LOCKING: can just spin_lock() since IRQs are disabled anyway. -+ * I am paranoid */ -+ acx_lock(adev, flags); -+ -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ if (unlikely(0xffff == unmasked)) { -+ /* 0xffff value hints at missing hardware, -+ * so don't do anything. -+ * Not very clean, but other drivers do the same... */ -+ log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n"); -+ goto none; -+ } -+ -+ /* We will check only "interesting" IRQ types */ -+ irqtype = unmasked & ~adev->irq_mask; -+ if (!irqtype) { -+ /* We are on a shared IRQ line and it wasn't our IRQ */ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n", -+ unmasked, adev->irq_mask); -+ goto none; -+ } -+ -+ /* Done here because IRQ_NONEs taking three lines of log -+ ** drive me crazy */ -+ FN_ENTER; -+ -+#define IRQ_ITERATE 1 -+#if IRQ_ITERATE -+if (jiffies != adev->irq_last_jiffies) { -+ adev->irq_loops_this_jiffy = 0; -+ adev->irq_last_jiffies = jiffies; -+} -+ -+/* safety condition; we'll normally abort loop below -+ * in case no IRQ type occurred */ -+while (likely(--irqcount)) { -+#endif -+ /* ACK all IRQs ASAP */ -+ write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff); -+ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n", -+ unmasked, adev->irq_mask, irqtype); -+ -+ /* Handle most important IRQ types first */ -+ if (irqtype & HOST_INT_RX_DATA) { -+ log(L_IRQ, "got Rx_Data IRQ\n"); -+ acxmem_l_process_rxdesc(adev); -+ } -+ if (irqtype & HOST_INT_TX_COMPLETE) { -+ log(L_IRQ, "got Tx_Complete IRQ\n"); -+ /* don't clean up on each Tx complete, wait a bit -+ * unless we're going towards full, in which case -+ * we do it immediately, too (otherwise we might lockup -+ * with a full Tx buffer if we go into -+ * acxmem_l_clean_txdesc() at a time when we won't wakeup -+ * the net queue in there for some reason...) */ -+ if (adev->tx_free <= TX_START_CLEAN) { -+#if TX_CLEANUP_IN_SOFTIRQ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP); -+#else -+ acxmem_l_clean_txdesc(adev); -+#endif -+ } -+ } -+ -+ /* Less frequent ones */ -+ if (irqtype & (0 -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ | HOST_INT_SCAN_COMPLETE -+ )) { -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ log(L_IRQ, "got Command_Complete IRQ\n"); -+ /* save the state for the running issue_cmd() */ -+ SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE); -+ } -+ if (irqtype & HOST_INT_INFO) { -+ handle_info_irq(adev); -+ } -+ if (irqtype & HOST_INT_SCAN_COMPLETE) { -+ log(L_IRQ, "got Scan_Complete IRQ\n"); -+ /* need to do that in process context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN); -+ /* remember that fw is not scanning anymore */ -+ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); -+ } -+ } -+ -+ /* These we just log, but either they happen rarely -+ * or we keep them masked out */ -+ if (irqtype & (0 -+ /* | HOST_INT_RX_DATA */ -+ /* | HOST_INT_TX_COMPLETE */ -+ | HOST_INT_TX_XFER -+ | HOST_INT_RX_COMPLETE -+ | HOST_INT_DTIM -+ | HOST_INT_BEACON -+ | HOST_INT_TIMER -+ | HOST_INT_KEY_NOT_FOUND -+ | HOST_INT_IV_ICV_FAILURE -+ /* | HOST_INT_CMD_COMPLETE */ -+ /* | HOST_INT_INFO */ -+ | HOST_INT_OVERFLOW -+ | HOST_INT_PROCESS_ERROR -+ /* | HOST_INT_SCAN_COMPLETE */ -+ | HOST_INT_FCS_THRESHOLD -+ | HOST_INT_UNKNOWN -+ )) { -+ log_unusual_irq(irqtype); -+ } -+ -+#if IRQ_ITERATE -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ irqtype = unmasked & ~adev->irq_mask; -+ /* Bail out if no new IRQ bits or if all are masked out */ -+ if (!irqtype) -+ break; -+ -+ if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) { -+ printk(KERN_ERR "acx: too many interrupts per jiffy!\n"); -+ /* Looks like card floods us with IRQs! Try to stop that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ /* This will short-circuit all future attempts to handle IRQ. -+ * We cant do much more... */ -+ adev->irq_mask = 0; -+ break; -+ } -+} -+#endif -+ /* Routine to perform blink with range */ -+ if (unlikely(adev->led_power == 2)) -+ update_link_quality_led(adev); -+ -+/* handled: */ -+ /* write_flush(adev); - not needed, last op was read anyway */ -+ acx_unlock(adev, flags); -+ FN_EXIT0; -+ return IRQ_HANDLED; -+ -+none: -+ acx_unlock(adev, flags); -+ return IRQ_NONE; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_power_led -+*/ -+void -+acxmem_l_power_led(acx_device_t *adev, int enable) -+{ -+ u16 gpio_pled = IS_ACX111(adev) ? 0x0040 : 0x0800; -+ -+ /* A hack. Not moving message rate limiting to adev->xxx -+ * (it's only a debug message after all) */ -+ static int rate_limit = 0; -+ -+ if (rate_limit++ < 3) -+ log(L_IOCTL, "Please report in case toggling the power " -+ "LED doesn't work for your card!\n"); -+ if (enable) -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled); -+ else -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled); -+} -+ -+ -+/*********************************************************************** -+** Ioctls -+*/ -+ -+/*********************************************************************** -+*/ -+int -+acx111pci_ioctl_info( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+#if ACX_DEBUG > 1 -+ acx_device_t *adev = ndev2adev(ndev); -+ rxdesc_t *rxdesc; -+ txdesc_t *txdesc; -+ rxhostdesc_t *rxhostdesc; -+ txhostdesc_t *txhostdesc; -+ struct acx111_ie_memoryconfig memconf; -+ struct acx111_ie_queueconfig queueconf; -+ unsigned long flags; -+ int i; -+ char memmap[0x34]; -+ char rxconfig[0x8]; -+ char fcserror[0x8]; -+ char ratefallback[0x5]; -+ -+ if ( !(acx_debug & (L_IOCTL|L_DEBUG)) ) -+ return OK; -+ /* using printk() since we checked debug flag already */ -+ -+ acx_sem_lock(adev); -+ -+ if (!IS_ACX111(adev)) { -+ printk("acx111-specific function called " -+ "with non-acx111 chip, aborting\n"); -+ goto end_ok; -+ } -+ -+ /* get Acx111 Memory Configuration */ -+ memset(&memconf, 0, sizeof(memconf)); -+ /* BTW, fails with 12 (Write only) error code. -+ ** Retained for easy testing of issue_cmd error handling :) */ -+ printk ("Interrogating queue config\n"); -+ acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG); -+ printk ("done with queue config\n"); -+ -+ /* get Acx111 Queue Configuration */ -+ memset(&queueconf, 0, sizeof(queueconf)); -+ printk ("Interrogating mem config options\n"); -+ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); -+ printk ("done with mem config options\n"); -+ -+ /* get Acx111 Memory Map */ -+ memset(memmap, 0, sizeof(memmap)); -+ printk ("Interrogating mem map\n"); -+ acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP); -+ printk ("done with mem map\n"); -+ -+ /* get Acx111 Rx Config */ -+ memset(rxconfig, 0, sizeof(rxconfig)); -+ printk ("Interrogating rxconfig\n"); -+ acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG); -+ printk ("done with queue rxconfig\n"); -+ -+ /* get Acx111 fcs error count */ -+ memset(fcserror, 0, sizeof(fcserror)); -+ printk ("Interrogating fcs err count\n"); -+ acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT); -+ printk ("done with err count\n"); -+ -+ /* get Acx111 rate fallback */ -+ memset(ratefallback, 0, sizeof(ratefallback)); -+ printk ("Interrogating rate fallback\n"); -+ acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK); -+ printk ("done with rate fallback\n"); -+ -+ /* force occurrence of a beacon interrupt */ -+ /* TODO: comment why is this necessary */ -+ write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON); -+ -+ /* dump Acx111 Mem Configuration */ -+ printk("dump mem config:\n" -+ "data read: %d, struct size: %d\n" -+ "Number of stations: %1X\n" -+ "Memory block size: %1X\n" -+ "tx/rx memory block allocation: %1X\n" -+ "count rx: %X / tx: %X queues\n" -+ "options %1X\n" -+ "fragmentation %1X\n" -+ "Rx Queue 1 Count Descriptors: %X\n" -+ "Rx Queue 1 Host Memory Start: %X\n" -+ "Tx Queue 1 Count Descriptors: %X\n" -+ "Tx Queue 1 Attributes: %X\n", -+ memconf.len, (int) sizeof(memconf), -+ memconf.no_of_stations, -+ memconf.memory_block_size, -+ memconf.tx_rx_memory_block_allocation, -+ memconf.count_rx_queues, memconf.count_tx_queues, -+ memconf.options, -+ memconf.fragmentation, -+ memconf.rx_queue1_count_descs, -+ acx2cpu(memconf.rx_queue1_host_rx_start), -+ memconf.tx_queue1_count_descs, -+ memconf.tx_queue1_attributes); -+ -+ /* dump Acx111 Queue Configuration */ -+ printk("dump queue head:\n" -+ "data read: %d, struct size: %d\n" -+ "tx_memory_block_address (from card): %X\n" -+ "rx_memory_block_address (from card): %X\n" -+ "rx1_queue address (from card): %X\n" -+ "tx1_queue address (from card): %X\n" -+ "tx1_queue attributes (from card): %X\n", -+ queueconf.len, (int) sizeof(queueconf), -+ queueconf.tx_memory_block_address, -+ queueconf.rx_memory_block_address, -+ queueconf.rx1_queue_address, -+ queueconf.tx1_queue_address, -+ queueconf.tx1_attributes); -+ -+ /* dump Acx111 Mem Map */ -+ printk("dump mem map:\n" -+ "data read: %d, struct size: %d\n" -+ "Code start: %X\n" -+ "Code end: %X\n" -+ "WEP default key start: %X\n" -+ "WEP default key end: %X\n" -+ "STA table start: %X\n" -+ "STA table end: %X\n" -+ "Packet template start: %X\n" -+ "Packet template end: %X\n" -+ "Queue memory start: %X\n" -+ "Queue memory end: %X\n" -+ "Packet memory pool start: %X\n" -+ "Packet memory pool end: %X\n" -+ "iobase: %p\n" -+ "iobase2: %p\n", -+ *((u16 *)&memmap[0x02]), (int) sizeof(memmap), -+ *((u32 *)&memmap[0x04]), -+ *((u32 *)&memmap[0x08]), -+ *((u32 *)&memmap[0x0C]), -+ *((u32 *)&memmap[0x10]), -+ *((u32 *)&memmap[0x14]), -+ *((u32 *)&memmap[0x18]), -+ *((u32 *)&memmap[0x1C]), -+ *((u32 *)&memmap[0x20]), -+ *((u32 *)&memmap[0x24]), -+ *((u32 *)&memmap[0x28]), -+ *((u32 *)&memmap[0x2C]), -+ *((u32 *)&memmap[0x30]), -+ adev->iobase, -+ adev->iobase2); -+ -+ /* dump Acx111 Rx Config */ -+ printk("dump rx config:\n" -+ "data read: %d, struct size: %d\n" -+ "rx config: %X\n" -+ "rx filter config: %X\n", -+ *((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig), -+ *((u16 *)&rxconfig[0x04]), -+ *((u16 *)&rxconfig[0x06])); -+ -+ /* dump Acx111 fcs error */ -+ printk("dump fcserror:\n" -+ "data read: %d, struct size: %d\n" -+ "fcserrors: %X\n", -+ *((u16 *)&fcserror[0x02]), (int) sizeof(fcserror), -+ *((u32 *)&fcserror[0x04])); -+ -+ /* dump Acx111 rate fallback */ -+ printk("dump rate fallback:\n" -+ "data read: %d, struct size: %d\n" -+ "ratefallback: %X\n", -+ *((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback), -+ *((u8 *)&ratefallback[0x04])); -+ -+ /* protect against IRQ */ -+ acx_lock(adev, flags); -+ -+ /* dump acx111 internal rx descriptor ring buffer */ -+ rxdesc = adev->rxdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump internal rxdesc %d:\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n" -+ "RxStatus (dynamic) 0x%X\n" -+ "Mod/Pre (dynamic) 0x%X\n", -+ i, -+ rxdesc, -+ acx2cpu(rxdesc->pNextDesc), -+ acx2cpu(rxdesc->ACXMemPtr), -+ rxdesc->Ctl_8, -+ rxdesc->rate, -+ rxdesc->error, -+ rxdesc->SNR); -+ rxdesc++; -+ } -+ -+ /* dump host rx descriptor ring buffer */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump host rxdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ rxhostdesc, -+ acx2cpu(rxhostdesc->data_phy), -+ rxhostdesc->data_offset, -+ le16_to_cpu(rxhostdesc->Ctl_16), -+ le16_to_cpu(rxhostdesc->length), -+ acx2cpu(rxhostdesc->desc_phy_next), -+ rxhostdesc->Status); -+ rxhostdesc++; -+ } -+ -+ /* dump acx111 internal tx descriptor ring buffer */ -+ txdesc = adev->txdesc_start; -+ -+ /* loop over complete transmit pool */ -+ if (txdesc) for (i = 0; i < TX_CNT; i++) { -+ printk("\ndump internal txdesc %d:\n" -+ "size 0x%X\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "host mem pointer (dynamic) 0x%X\n" -+ "length (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "CTL2 (dynamic) 0x%X\n" -+ "Status (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n", -+ i, -+ (int) sizeof(struct txdesc), -+ txdesc, -+ acx2cpu(txdesc->pNextDesc), -+ acx2cpu(txdesc->AcxMemPtr), -+ acx2cpu(txdesc->HostMemPtr), -+ le16_to_cpu(txdesc->total_length), -+ txdesc->Ctl_8, -+ txdesc->Ctl2_8, txdesc->error, -+ txdesc->u.r1.rate); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ -+ /* dump host tx descriptor ring buffer */ -+ -+ txhostdesc = adev->txhostdesc_start; -+ -+ /* loop over complete host send pool */ -+ if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) { -+ printk("\ndump host txdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ txhostdesc, -+ acx2cpu(txhostdesc->data_phy), -+ txhostdesc->data_offset, -+ le16_to_cpu(txhostdesc->Ctl_16), -+ le16_to_cpu(txhostdesc->length), -+ acx2cpu(txhostdesc->desc_phy_next), -+ le32_to_cpu(txhostdesc->Status)); -+ txhostdesc++; -+ } -+ -+ /* write_reg16(adev, 0xb4, 0x4); */ -+ -+ acx_unlock(adev, flags); -+end_ok: -+ -+ acx_sem_unlock(adev); -+#endif /* ACX_DEBUG */ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100mem_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ u16 gpio_old; -+ -+ if (!IS_ACX100(adev)) { -+ /* WARNING!!! -+ * Removing this check *might* damage -+ * hardware, since we're tweaking GPIOs here after all!!! -+ * You've been warned... -+ * WARNING!!! */ -+ printk("acx: sorry, setting bias level for non-acx100 " -+ "is not supported yet\n"); -+ return OK; -+ } -+ -+ if (*extra > 7) { -+ printk("acx: invalid bias parameter, range is 0-7\n"); -+ return -EINVAL; -+ } -+ -+ acx_sem_lock(adev); -+ -+ /* Need to lock accesses to [IO_ACX_GPIO_OUT]: -+ * IRQ handler uses it to update LED */ -+ acx_lock(adev, flags); -+ gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT); -+ write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8)); -+ acx_unlock(adev, flags); -+ -+ log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old); -+ printk("%s: PHY power amplifier bias: old:%d, new:%d\n", -+ ndev->name, -+ (gpio_old & 0x0700) >> 8, (unsigned char)*extra); -+ -+ acx_sem_unlock(adev); -+ -+ return OK; -+} -+ -+/*************************************************************** -+** acxmem_l_alloc_tx -+** Actually returns a txdesc_t* ptr -+** -+** FIXME: in case of fragments, should allocate multiple descrs -+** after figuring out how many we need and whether we still have -+** sufficiently many. -+*/ -+tx_t* -+acxmem_l_alloc_tx(acx_device_t *adev) -+{ -+ struct txdesc *txdesc; -+ unsigned head; -+ u8 ctl8; -+ static int txattempts = 0; -+ -+ FN_ENTER; -+ -+ if (unlikely(!adev->tx_free)) { -+ printk("acx: BUG: no free txdesc left\n"); -+ /* -+ * Probably the ACX ignored a transmit attempt and now there's a packet -+ * sitting in the queue we think should be transmitting but the ACX doesn't -+ * know about. -+ * On the first pass, send the ACX a TxProc interrupt to try moving -+ * things along, and if that doesn't work (ie, we get called again) completely -+ * flush the transmit queue. -+ */ -+ if (txattempts < 10) { -+ txattempts++; -+ printk ("acx: trying to wake up ACX\n"); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); -+ write_flush(adev); } -+ else { -+ txattempts = 0; -+ printk ("acx: flushing transmit queue.\n"); -+ acxmem_l_clean_txdesc_emergency (adev); -+ } -+ txdesc = NULL; -+ goto end; -+ } -+ -+ /* -+ * Make a quick check to see if there is transmit buffer space on -+ * the ACX. This can't guarantee there is enough space for the packet -+ * since we don't yet know how big it is, but it will prevent at least some -+ * annoyances. -+ */ -+ if (!adev->acx_txbuf_blocks_free) { -+ txdesc = NULL; -+ goto end; -+ } -+ -+ head = adev->tx_head; -+ /* -+ * txdesc points to ACX memory -+ */ -+ txdesc = get_txdesc(adev, head); -+ ctl8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ -+ /* -+ * If we don't own the buffer (HOSTOWN) it is certainly not free; however, -+ * we may have previously thought we had enough memory to send -+ * a packet, allocated the buffer then gave up when we found not enough -+ * transmit buffer space on the ACX. In that case, HOSTOWN and -+ * ACXDONE will both be set. -+ */ -+ if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_HOSTOWN))) { -+ /* whoops, descr at current index is not free, so probably -+ * ring buffer already full */ -+ printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find " -+ "free txdesc\n", head, ctl8); -+ txdesc = NULL; -+ goto end; -+ } -+ -+ /* Needed in case txdesc won't be eventually submitted for tx */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_ACXDONE_HOSTOWN); -+ -+ adev->tx_free--; -+ log(L_BUFT, "tx: got desc %u, %u remain\n", -+ head, adev->tx_free); -+ /* Keep a few free descs between head and tail of tx ring. -+ ** It is not absolutely needed, just feels safer */ -+ if (adev->tx_free < TX_STOP_QUEUE) { -+ log(L_BUF, "stop queue (%u tx desc left)\n", -+ adev->tx_free); -+ acx_stop_queue(adev->ndev, NULL); -+ } -+ -+ /* returning current descriptor, so advance to next free one */ -+ adev->tx_head = (head + 1) % TX_CNT; -+end: -+ FN_EXIT0; -+ -+ return (tx_t*)txdesc; -+} -+ -+ -+/*************************************************************** -+** acxmem_l_dealloc_tx -+** Clears out a previously allocatedvoid acxmem_l_dealloc_tx(tx_t *tx_opaque); -+ transmit descriptor. The ACX -+** can get confused if we skip transmit descriptors in the queue, -+** so when we don't need a descriptor return it to its original -+** state and move the queue head pointer back. -+** -+*/ -+void -+acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque) -+{ -+ /* -+ * txdesc is the address of the descriptor on the ACX. -+ */ -+ txdesc_t *txdesc = (txdesc_t*)tx_opaque; -+ txdesc_t tmptxdesc; -+ int index; -+ -+ memset (&tmptxdesc, 0, sizeof(tmptxdesc)); -+ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; -+ tmptxdesc.u.r1.rate = 0x0a; -+ -+ /* -+ * Clear out all of the transmit descriptor except for the next pointer -+ */ -+ copy_to_slavemem (adev, (u32) &(txdesc->HostMemPtr), -+ (u8 *) &(tmptxdesc.HostMemPtr), -+ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc)); -+ -+ /* -+ * This is only called immediately after we've allocated, so we should -+ * be able to set the head back to this descriptor. -+ */ -+ index = ((u8*) txdesc - (u8*)adev->txdesc_start) / adev->txdesc_size; -+ printk ("acx_dealloc: moving head from %d to %d\n", adev->tx_head, index); -+ adev->tx_head = index; -+} -+ -+ -+/*********************************************************************** -+*/ -+void* -+acxmem_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) -+{ -+ return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_tx_data -+** -+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). -+** Can be called from acx_i_start_xmit (data frames from net core). -+** -+** FIXME: in case of fragments, should loop over the number of -+** pre-allocated tx descrs, properly setting up transfer data and -+** CTL_xxx flags according to fragment number. -+*/ -+void -+acxmem_update_queue_indicator (acx_device_t *adev, int txqueue) -+{ -+#ifdef USING_MORE_THAN_ONE_TRANSMIT_QUEUE -+ u32 indicator; -+ unsigned long flags; -+ int count; -+ -+ /* -+ * Can't handle an interrupt while we're fiddling with the ACX's lock, -+ * according to TI. The ACX is supposed to hold fw_lock for at most -+ * 500ns. -+ */ -+ local_irq_save (flags); -+ -+ /* -+ * Wait for ACX to release the lock (at most 500ns). -+ */ -+ count = 0; -+ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) -+ && (count++ < 50)) { -+ ndelay (10); -+ } -+ if (count < 50) { -+ -+ /* -+ * Take out the host lock - anything non-zero will work, so don't worry about -+ * be/le -+ */ -+ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 1); -+ -+ /* -+ * Avoid a race condition -+ */ -+ count = 0; -+ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) -+ && (count++ < 50)) { -+ ndelay (10); -+ } -+ -+ if (count < 50) { -+ /* -+ * Mark the queue active -+ */ -+ indicator = read_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator)); -+ indicator |= cpu_to_le32 (1 << txqueue); -+ write_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator), indicator); -+ } -+ -+ /* -+ * Release the host lock -+ */ -+ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 0); -+ -+ } -+ -+ /* -+ * Restore interrupts -+ */ -+ local_irq_restore (flags); -+#endif -+} -+ -+void -+acxmem_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len) -+{ -+ /* -+ * txdesc is the address on the ACX -+ */ -+ txdesc_t *txdesc = (txdesc_t*)tx_opaque; -+ txhostdesc_t *hostdesc1, *hostdesc2; -+ client_t *clt; -+ u16 rate_cur; -+ u8 Ctl_8, Ctl2_8; -+ u32 addr; -+ -+ FN_ENTER; -+ /* fw doesn't tx such packets anyhow */ -+ if (unlikely(len < WLAN_HDR_A3_LEN)) -+ goto end; -+ -+ hostdesc1 = get_txhostdesc(adev, txdesc); -+ /* modify flag status in separate variable to be able to write it back -+ * in one big swoop later (also in order to have less device memory -+ * accesses) */ -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */ -+ -+ hostdesc2 = hostdesc1 + 1; -+ -+ /* DON'T simply set Ctl field to 0 here globally, -+ * it needs to maintain a consistent flag status (those are state flags!!), -+ * otherwise it may lead to severe disruption. Only set or reset particular -+ * flags at the exact moment this is needed... */ -+ -+ /* let chip do RTS/CTS handshaking before sending -+ * in case packet size exceeds threshold */ -+ if (len > adev->rts_threshold) -+ SET_BIT(Ctl2_8, DESC_CTL2_RTS); -+ else -+ CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS); -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1); -+ break; -+ case ACX_MODE_2_STA: -+ clt = adev->ap_client; -+ break; -+#if 0 -+/* testing was done on acx111: */ -+ case ACX_MODE_MONITOR: -+ SET_BIT(Ctl2_8, 0 -+/* sends CTS to self before packet */ -+ + DESC_CTL2_SEQ /* don't increase sequence field */ -+/* not working (looks like good fcs is still added) */ -+ + DESC_CTL2_FCS /* don't add the FCS */ -+/* not tested */ -+ + DESC_CTL2_MORE_FRAG -+/* not tested */ -+ + DESC_CTL2_RETRY /* don't increase retry field */ -+/* not tested */ -+ + DESC_CTL2_POWER /* don't increase power mgmt. field */ -+/* no effect */ -+ + DESC_CTL2_WEP /* encrypt this frame */ -+/* not tested */ -+ + DESC_CTL2_DUR /* don't increase duration field */ -+ ); -+ /* fallthrough */ -+#endif -+ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ -+ clt = NULL; -+ break; -+ } -+ -+ rate_cur = clt ? clt->rate_cur : adev->rate_bcast; -+ if (unlikely(!rate_cur)) { -+ printk("acx: driver bug! bad ratemask\n"); -+ goto end; -+ } -+ -+ /* used in tx cleanup routine for auto rate and accounting: */ -+ put_txcr(adev, txdesc, clt, rate_cur); -+ -+ write_slavemem16 (adev, (u32) &(txdesc->total_length), cpu_to_le16(len)); -+ hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN); -+ if (IS_ACX111(adev)) { -+ /* note that if !txdesc->do_auto, txrate->cur -+ ** has only one nonzero bit */ -+ txdesc->u.r2.rate111 = cpu_to_le16( -+ rate_cur -+ /* WARNING: I was never able to make it work with prism54 AP. -+ ** It was falling down to 1Mbit where shortpre is not applicable, -+ ** and not working at all at "5,11 basic rates only" setting. -+ ** I even didn't see tx packets in radio packet capture. -+ ** Disabled for now --vda */ -+ /*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */ -+ ); -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ /* should add this to rate111 above as necessary */ -+ | (clt->pbcc511 ? RATE111_PBCC511 : 0) -+#endif -+ hostdesc1->length = cpu_to_le16(len); -+ } else { /* ACX100 */ -+ u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100; -+ write_slavemem8 (adev, (u32) &(txdesc->u.r1.rate), rate_100); -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ if (clt->pbcc511) { -+ if (n == RATE100_5 || n == RATE100_11) -+ n |= RATE100_PBCC511; -+ } -+ -+ if (clt->shortpre && (clt->cur != RATE111_1)) -+ SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */ -+#endif -+ /* set autodma and reclaim and 1st mpdu */ -+ SET_BIT(Ctl_8, DESC_CTL_FIRSTFRAG); -+ -+#if ACX_FRAGMENTATION -+ /* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */ -+#endif -+ hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN); -+ -+ /* -+ * Since we're not using autodma copy the packet data to the acx now. -+ * Even host descriptors point to the packet header, and the odd indexed -+ * descriptor following points to the packet data. -+ * -+ * The first step is to find free memory in the ACX transmit buffers. -+ * They don't necessarily map one to one with the transmit queue entries, -+ * so search through them starting just after the last one used. -+ */ -+ addr = allocate_acx_txbuf_space (adev, len); -+ if (addr) { -+ chaincopy_to_slavemem (adev, addr, hostdesc1->data, len); -+ } -+ else { -+ /* -+ * Bummer. We thought we might have enough room in the transmit -+ * buffers to send this packet, but it turns out we don't. alloc_tx -+ * has already marked this transmit descriptor as HOSTOWN and ACXDONE, -+ * which means the ACX will hang when it gets to this descriptor unless -+ * we do something about it. Having a bubble in the transmit queue just -+ * doesn't seem to work, so we have to reset this transmit queue entry's -+ * state to its original value and back up our head pointer to point -+ * back to this entry. -+ */ -+ hostdesc1->length = 0; -+ hostdesc2->length = 0; -+ write_slavemem16 (adev, (u32) &(txdesc->total_length), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG); -+ adev->tx_head = ((u8*) txdesc - (u8*) adev->txdesc_start) / adev->txdesc_size; -+ goto end; -+ } -+ /* -+ * Tell the ACX where the packet is. -+ */ -+ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), addr); -+ -+ } -+ /* don't need to clean ack/rts statistics here, already -+ * done on descr cleanup */ -+ -+ /* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors -+ * are now owned by the acx100; do this as LAST operation */ -+ CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN); -+ /* flush writes before we release hostdesc to the adapter here */ -+ //wmb(); -+ -+ /* write back modified flags */ -+ /* -+ * At this point Ctl_8 should just be FIRSTFRAG -+ */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl2_8),Ctl2_8); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), Ctl_8); -+ /* unused: txdesc->tx_time = cpu_to_le32(jiffies); */ -+ -+ /* -+ * Update the queue indicator to say there's data on the first queue. -+ */ -+ acxmem_update_queue_indicator (adev, 0); -+ -+ /* flush writes before we tell the adapter that it's its turn now */ -+ mmiowb(); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); -+ write_flush(adev); -+ -+ /* log the packet content AFTER sending it, -+ * in order to not delay sending any further than absolutely needed -+ * Do separate logs for acx100/111 to have human-readable rates */ -+ if (unlikely(acx_debug & (L_XFER|L_DATA))) { -+ u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc; -+ if (IS_ACX111(adev)) -+ printk("tx: pkt (%s): len %d " -+ "rate %04X%s status %u\n", -+ acx_get_packet_type_string(le16_to_cpu(fc)), len, -+ le16_to_cpu(txdesc->u.r2.rate111), -+ (le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "", -+ adev->status); -+ else -+ printk("tx: pkt (%s): len %d rate %03u%s status %u\n", -+ acx_get_packet_type_string(fc), len, -+ read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)), -+ (Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "", -+ adev->status); -+ -+ if (acx_debug & L_DATA) { -+ printk("tx: 802.11 [%d]: ", len); -+ acx_dump_bytes(hostdesc1->data, len); -+ } -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_clean_txdesc -+** -+** This function resets the txdescs' status when the ACX100 -+** signals the TX done IRQ (txdescs have been processed), starting with -+** the pool index of the descriptor which we would use next, -+** in order to make sure that we can be as fast as possible -+** in filling new txdescs. -+** Everytime we get called we know where the next packet to be cleaned is. -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_txbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_txbuffer(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ u8 Ctl_8; -+ -+ /* no FN_ENTER here, we don't want that */ -+ /* no locks here, since it's entirely non-critical code */ -+ txdesc = adev->txdesc_start; -+ if (unlikely(!txdesc)) return; -+ printk("tx: desc->Ctl8's:"); -+ for (i = 0; i < TX_CNT; i++) { -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ printk(" %02X", Ctl_8); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ printk("\n"); -+} -+#endif -+ -+ -+static void -+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger) -+{ -+ const char *err = "unknown error"; -+ -+ /* hmm, should we handle this as a mask -+ * of *several* bits? -+ * For now I think only caring about -+ * individual bits is ok... */ -+ switch (error) { -+ case 0x01: -+ err = "no Tx due to error in other fragment"; -+ adev->wstats.discard.fragment++; -+ break; -+ case 0x02: -+ err = "Tx aborted"; -+ adev->stats.tx_aborted_errors++; -+ break; -+ case 0x04: -+ err = "Tx desc wrong parameters"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x08: -+ err = "WEP key not found"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x10: -+ err = "MSDU lifetime timeout? - try changing " -+ "'iwconfig retry lifetime XXX'"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x20: -+ err = "excessive Tx retries due to either distance " -+ "too high or unable to Tx or Tx frame error - " -+ "try changing 'iwconfig txpower XXX' or " -+ "'sens'itivity or 'retry'"; -+ adev->wstats.discard.retries++; -+ /* Tx error 0x20 also seems to occur on -+ * overheating, so I'm not sure whether we -+ * actually want to do aggressive radio recalibration, -+ * since people maybe won't notice then that their hardware -+ * is slowly getting cooked... -+ * Or is it still a safe long distance from utter -+ * radio non-functionality despite many radio recalibs -+ * to final destructive overheating of the hardware? -+ * In this case we really should do recalib here... -+ * I guess the only way to find out is to do a -+ * potentially fatal self-experiment :-\ -+ * Or maybe only recalib in case we're using Tx -+ * rate auto (on errors switching to lower speed -+ * --> less heat?) or 802.11 power save mode? -+ * -+ * ok, just do it. */ -+ if (++adev->retry_errors_msg_ratelimit % 4 == 0) { -+ if (adev->retry_errors_msg_ratelimit <= 20) { -+ printk("%s: several excessive Tx " -+ "retry errors occurred, attempting " -+ "to recalibrate radio. Radio " -+ "drift might be caused by increasing " -+ "card temperature, please check the card " -+ "before it's too late!\n", -+ adev->ndev->name); -+ if (adev->retry_errors_msg_ratelimit == 20) -+ printk("disabling above message\n"); -+ } -+ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ } -+ break; -+ case 0x40: -+ err = "Tx buffer overflow"; -+ adev->stats.tx_fifo_errors++; -+ break; -+ case 0x80: -+ err = "DMA error"; -+ adev->wstats.discard.misc++; -+ break; -+ } -+ adev->stats.tx_errors++; -+ if (adev->stats.tx_errors <= 20) -+ printk("%s: tx error 0x%02X, buf %02u! (%s)\n", -+ adev->ndev->name, error, finger, err); -+ else -+ printk("%s: tx error 0x%02X, buf %02u!\n", -+ adev->ndev->name, error, finger); -+} -+ -+ -+unsigned int -+acxmem_l_clean_txdesc(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ unsigned finger; -+ int num_cleaned; -+ u16 r111; -+ u8 error, ack_failures, rts_failures, rts_ok, r100, Ctl_8; -+ u32 acxmem; -+ txdesc_t tmptxdesc; -+ -+ FN_ENTER; -+ -+ /* -+ * Set up a template descriptor for re-initialization. The only -+ * things that get set are Ctl_8 and the rate, and the rate defaults -+ * to 1Mbps. -+ */ -+ memset (&tmptxdesc, 0, sizeof (tmptxdesc)); -+ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; -+ tmptxdesc.u.r1.rate = 0x0a; -+ -+ if (unlikely(acx_debug & L_DEBUG)) -+ log_txbuffer(adev); -+ -+ log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail); -+ -+ /* We know first descr which is not free yet. We advance it as far -+ ** as we see correct bits set in following descs (if next desc -+ ** is NOT free, we shouldn't advance at all). We know that in -+ ** front of tx_tail may be "holes" with isolated free descs. -+ ** We will catch up when all intermediate descs will be freed also */ -+ -+ finger = adev->tx_tail; -+ num_cleaned = 0; -+ while (likely(finger != adev->tx_head)) { -+ txdesc = get_txdesc(adev, finger); -+ -+ /* If we allocated txdesc on tx path but then decided -+ ** to NOT use it, then it will be left as a free "bubble" -+ ** in the "allocated for tx" part of the ring. -+ ** We may meet it on the next ring pass here. */ -+ -+ /* stop if not marked as "tx finished" and "host owned" */ -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ if ((Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN) -+ != DESC_CTL_ACXDONE_HOSTOWN) { -+ if (unlikely(!num_cleaned)) { /* maybe remove completely */ -+ log(L_BUFT, "clean_txdesc: tail isn't free. " -+ "tail:%d head:%d\n", -+ adev->tx_tail, adev->tx_head); -+ } -+ break; -+ } -+ -+ /* remember desc values... */ -+ error = read_slavemem8 (adev, (u32) &(txdesc->error)); -+ ack_failures = read_slavemem8 (adev, (u32) &(txdesc->ack_failures)); -+ rts_failures = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures)); -+ rts_ok = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok)); -+ r100 = read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)); -+ r111 = le16_to_cpu(read_slavemem16 (adev, (u32) &(txdesc->u.r2.rate111))); -+ -+ /* need to check for certain error conditions before we -+ * clean the descriptor: we still need valid descr data here */ -+ if (unlikely(0x30 & error)) { -+ /* only send IWEVTXDROP in case of retry or lifetime exceeded; -+ * all other errors mean we screwed up locally */ -+ union iwreq_data wrqu; -+ wlan_hdr_t *hdr; -+ txhostdesc_t *hostdesc; -+ -+ hostdesc = get_txhostdesc(adev, txdesc); -+ hdr = (wlan_hdr_t *)hostdesc->data; -+ MAC_COPY(wrqu.addr.sa_data, hdr->a1); -+ wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL); -+ } -+ -+ /* -+ * Free up the transmit data buffers -+ */ -+ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (acxmem) { -+ reclaim_acx_txbuf_space (adev, acxmem); -+ } -+ -+ /* ...and free the desc by clearing all the fields -+ except the next pointer */ -+ copy_to_slavemem (adev, -+ (u32) &(txdesc->HostMemPtr), -+ (u8 *) &(tmptxdesc.HostMemPtr), -+ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc) -+ ); -+ -+ adev->tx_free++; -+ num_cleaned++; -+ -+ if ((adev->tx_free >= TX_START_QUEUE) -+ && (adev->status == ACX_STATUS_4_ASSOCIATED) -+ && (acx_queue_stopped(adev->ndev)) -+ ) { -+ log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n", -+ adev->tx_free); -+ acx_wake_queue(adev->ndev, NULL); -+ } -+ -+ /* do error checking, rate handling and logging -+ * AFTER having done the work, it's faster */ -+ -+ /* do rate handling */ -+ if (adev->rate_auto) { -+ struct client *clt = get_txc(adev, txdesc); -+ if (clt) { -+ u16 cur = get_txr(adev, txdesc); -+ if (clt->rate_cur == cur) { -+ acx_l_handle_txrate_auto(adev, clt, -+ cur, /* intended rate */ -+ r100, r111, /* actually used rate */ -+ (error & 0x30), /* was there an error? */ -+ TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free); -+ } -+ } -+ } -+ -+ if (unlikely(error)) -+ handle_tx_error(adev, error, finger); -+ -+ if (IS_ACX111(adev)) -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n", -+ finger, ack_failures, rts_failures, rts_ok, r111); -+ else -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n", -+ finger, ack_failures, rts_failures, rts_ok, r100); -+ -+ /* update pointer for descr to be cleaned next */ -+ finger = (finger + 1) % TX_CNT; -+ } -+ -+ /* remember last position */ -+ adev->tx_tail = finger; -+/* end: */ -+ FN_EXIT1(num_cleaned); -+ return num_cleaned; -+} -+ -+/* clean *all* Tx descriptors, and regardless of their previous state. -+ * Used for brute-force reset handling. */ -+void -+acxmem_l_clean_txdesc_emergency(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ u32 acxmem; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc = get_txdesc(adev, i); -+ -+ /* free it */ -+ write_slavemem8 (adev, (u32) &(txdesc->ack_failures), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->error), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN); -+ -+ /* -+ * Clean up the memory allocated on the ACX for this transmit descriptor. -+ */ -+ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (acxmem) { -+ reclaim_acx_txbuf_space (adev, acxmem); -+ } -+ -+ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), 0); -+ } -+ -+ adev->tx_free = TX_CNT; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_create_tx_host_desc_queue -+*/ -+ -+static void* -+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg) -+{ -+ void *ptr; -+ ptr = kmalloc (size, GFP_KERNEL); -+ /* -+ * The ACX can't use the physical address, so we'll have to fake it -+ * later and it might be handy to have the virtual address. -+ */ -+ *phy = (dma_addr_t) NULL; -+ -+ if (ptr) { -+ log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n", -+ msg, (int)size, ptr, (unsigned long long)*phy); -+ memset(ptr, 0, size); -+ return ptr; -+ } -+ printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n", -+ msg, (int)size); -+ return NULL; -+} -+ -+ -+/* -+ * In the generic slave memory access mode, most of the stuff in -+ * the txhostdesc_t is unused. It's only here because the rest of -+ * the ACX driver expects it to be since the PCI version uses indirect -+ * host memory organization with DMA. Since we're not using DMA the -+ * only use we have for the host descriptors is to store the packets -+ * on the way out. -+ */ -+static int -+acxmem_s_create_tx_host_desc_queue(acx_device_t *adev) -+{ -+ txhostdesc_t *hostdesc; -+ u8 *txbuf; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate TX buffer */ -+ adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS; -+ -+ adev->txbuf_start = allocate(adev, adev->txbuf_area_size, -+ &adev->txbuf_startphy, "txbuf_start"); -+ if (!adev->txbuf_start) -+ goto fail; -+ -+ /* allocate the TX host descriptor queue pool */ -+ adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc); -+ -+ adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size, -+ &adev->txhostdesc_startphy, "txhostdesc_start"); -+ if (!adev->txhostdesc_start) -+ goto fail; -+ -+ /* check for proper alignment of TX host descriptor pool */ -+ if ((long) adev->txhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ hostdesc = adev->txhostdesc_start; -+ txbuf = adev->txbuf_start; -+ -+#if 0 -+/* Each tx buffer is accessed by hardware via -+** txdesc -> txhostdesc(s) -> txbuffer(s). -+** We use only one txhostdesc per txdesc, but it looks like -+** acx111 is buggy: it accesses second txhostdesc -+** (via hostdesc.desc_phy_next field) even if -+** txdesc->length == hostdesc->length and thus -+** entire packet was placed into first txhostdesc. -+** Due to this bug acx111 hangs unless second txhostdesc -+** has le16_to_cpu(hostdesc.length) = 3 (or larger) -+** Storing NULL into hostdesc.desc_phy_next -+** doesn't seem to help. -+** -+** Update: although it worked on Xterasys XN-2522g -+** with len=3 trick, WG311v2 is even more bogus, doesn't work. -+** Keeping this code (#ifdef'ed out) for documentational purposes. -+*/ -+ for (i = 0; i < TX_CNT*2; i++) { -+ hostdesc_phy += sizeof(*hostdesc); -+ if (!(i & 1)) { -+ hostdesc->data_phy = cpu2acx(txbuf_phy); -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); -+ /* hostdesc->length = ... */ -+ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); -+ hostdesc->pNext = ptr2acx(NULL); -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ hostdesc->data = txbuf; -+ -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS; -+ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS; -+ } else { -+ /* hostdesc->data_phy = ... */ -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ /* hostdesc->Ctl_16 = ... */ -+ hostdesc->length = cpu_to_le16(3); /* bug workaround */ -+ /* hostdesc->desc_phy_next = ... */ -+ /* hostdesc->pNext = ... */ -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ /* hostdesc->data = ... */ -+ } -+ hostdesc++; -+ } -+#endif -+/* We initialize two hostdescs so that they point to adjacent -+** memory areas. Thus txbuf is really just a contiguous memory area */ -+ for (i = 0; i < TX_CNT*2; i++) { -+ /* ->data is a non-hardware field: */ -+ hostdesc->data = txbuf; -+ -+ if (!(i & 1)) { -+ txbuf += WLAN_HDR_A3_LEN; -+ } else { -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; -+ } -+ hostdesc++; -+ } -+ hostdesc--; -+ -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_tx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxmem_s_create_rx_host_desc_queue -+*/ -+/* the whole size of a data buffer (header plus data body) -+ * plus 32 bytes safety offset at the end */ -+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32) -+ -+static int -+acxmem_s_create_rx_host_desc_queue(acx_device_t *adev) -+{ -+ rxhostdesc_t *hostdesc; -+ rxbuffer_t *rxbuf; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate the RX host descriptor queue pool */ -+ adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc); -+ -+ adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size, -+ &adev->rxhostdesc_startphy, "rxhostdesc_start"); -+ if (!adev->rxhostdesc_start) -+ goto fail; -+ -+ /* check for proper alignment of RX host descriptor pool */ -+ if ((long) adev->rxhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ /* allocate Rx buffer pool which will be used by the acx -+ * to store the whole content of the received frames in it */ -+ adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE; -+ -+ adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size, -+ &adev->rxbuf_startphy, "rxbuf_start"); -+ if (!adev->rxbuf_start) -+ goto fail; -+ -+ rxbuf = adev->rxbuf_start; -+ hostdesc = adev->rxhostdesc_start; -+ -+ /* don't make any popular C programming pointer arithmetic mistakes -+ * here, otherwise I'll kill you... -+ * (and don't dare asking me why I'm warning you about that...) */ -+ for (i = 0; i < RX_CNT; i++) { -+ hostdesc->data = rxbuf; -+ hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE); -+ rxbuf++; -+ hostdesc++; -+ } -+ hostdesc--; -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_rx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxmem_s_create_hostdesc_queues -+*/ -+int -+acxmem_s_create_hostdesc_queues(acx_device_t *adev) -+{ -+ int result; -+ result = acxmem_s_create_tx_host_desc_queue(adev); -+ if (OK != result) return result; -+ result = acxmem_s_create_rx_host_desc_queue(adev); -+ return result; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_tx_desc_queue -+*/ -+static void -+acxmem_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start) -+{ -+ txdesc_t *txdesc; -+ u32 clr; -+ int i; -+ -+ FN_ENTER; -+ -+ if (IS_ACX100(adev)) -+ adev->txdesc_size = sizeof(*txdesc); -+ else -+ /* the acx111 txdesc is 4 bytes larger */ -+ adev->txdesc_size = sizeof(*txdesc) + 4; -+ -+ /* -+ * This refers to an ACX address, not one of ours -+ */ -+ adev->txdesc_start = (txdesc_t *) tx_queue_start; -+ -+ log(L_DEBUG, "adev->txdesc_start=%p\n", -+ adev->txdesc_start); -+ -+ adev->tx_free = TX_CNT; -+ /* done by memset: adev->tx_head = 0; */ -+ /* done by memset: adev->tx_tail = 0; */ -+ txdesc = adev->txdesc_start; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111 has a preinitialized Tx buffer! */ -+ /* loop over whole send pool */ -+ /* FIXME: do we have to do the hostmemptr stuff here?? */ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; -+ /* reserve two (hdr desc and payload desc) */ -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ } else { -+ /* ACX100 Tx buffer needs to be initialized by us */ -+ /* clear whole send pool. sizeof is safe here (we are acx100) */ -+ -+ /* -+ * adev->txdesc_start refers to device memory, so we can't write -+ * directly to it. -+ */ -+ clr = (u32) adev->txdesc_start; -+ while (clr < (u32) adev->txdesc_start + (TX_CNT * sizeof(*txdesc))) { -+ write_slavemem32 (adev, clr, 0); -+ clr += 4; -+ } -+ -+ /* loop over whole send pool */ -+ for (i = 0; i < TX_CNT; i++) { -+ log(L_DEBUG, "configure card tx descriptor: 0x%p, " -+ "size: 0x%X\n", txdesc, adev->txdesc_size); -+ -+ /* initialise ctl */ -+ /* -+ * No auto DMA here -+ */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), -+ (u8) (DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG)); -+ /* done by memset(0): txdesc->Ctl2_8 = 0; */ -+ -+ /* point to next txdesc */ -+ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), -+ (u32) cpu_to_le32 ((u8 *) txdesc + adev->txdesc_size)); -+ -+ /* go to the next one */ -+ /* ++ is safe here (we are acx100) */ -+ txdesc++; -+ } -+ /* go back to the last one */ -+ txdesc--; -+ /* and point to the first making it a ring buffer */ -+ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), -+ (u32) cpu_to_le32 (tx_queue_start)); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_rx_desc_queue -+*/ -+static void -+acxmem_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start) -+{ -+ rxdesc_t *rxdesc; -+ u32 mem_offs; -+ int i; -+ -+ FN_ENTER; -+ -+ /* done by memset: adev->rx_tail = 0; */ -+ -+ /* ACX111 doesn't need any further config: preconfigures itself. -+ * Simply print ring buffer for debugging */ -+ if (IS_ACX111(adev)) { -+ /* rxdesc_start already set here */ -+ -+ adev->rxdesc_start = (rxdesc_t *) rx_queue_start; -+ -+ rxdesc = adev->rxdesc_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc); -+ rxdesc = adev->rxdesc_start = (rxdesc_t *) -+ acx2cpu(rxdesc->pNextDesc); -+ } -+ } else { -+ /* we didn't pre-calculate rxdesc_start in case of ACX100 */ -+ /* rxdesc_start should be right AFTER Tx pool */ -+ adev->rxdesc_start = (rxdesc_t *) -+ ((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t))); -+ /* NB: sizeof(txdesc_t) above is valid because we know -+ ** we are in if (acx100) block. Beware of cut-n-pasting elsewhere! -+ ** acx111's txdesc is larger! */ -+ -+ mem_offs = (u32) adev->rxdesc_start; -+ while (mem_offs < (u32) adev->rxdesc_start + (RX_CNT * sizeof (*rxdesc))) { -+ write_slavemem32 (adev, mem_offs, 0); -+ mem_offs += 4; -+ } -+ -+ /* loop over whole receive pool */ -+ rxdesc = adev->rxdesc_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc); -+ /* point to next rxdesc */ -+ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), -+ (u32) cpu_to_le32 ((u8 *) rxdesc + sizeof(*rxdesc))); -+ /* go to the next one */ -+ rxdesc++; -+ } -+ /* go to the last one */ -+ rxdesc--; -+ -+ /* and point to the first making it a ring buffer */ -+ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), -+ (u32) cpu_to_le32 (rx_queue_start)); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_desc_queues -+*/ -+void -+acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start) -+{ -+ u32 *p; -+ int i; -+ -+ acxmem_create_tx_desc_queue(adev, tx_queue_start); -+ acxmem_create_rx_desc_queue(adev, rx_queue_start); -+ p = (u32 *) adev->acx_queue_indicator; -+ for (i = 0; i < 4; i++) { -+ write_slavemem32 (adev, (u32) p, 0); -+ p++; -+ } -+} -+ -+ -+/*************************************************************** -+** acxmem_s_proc_diag_output -+*/ -+char* -+acxmem_s_proc_diag_output(char *p, acx_device_t *adev) -+{ -+ const char *rtl, *thd, *ttl; -+ txdesc_t *txdesc; -+ u8 Ctl_8; -+ rxdesc_t *rxdesc; -+ int i; -+ u32 tmp; -+ txdesc_t txd; -+ u8 buf[0x200]; -+ int j, k; -+ -+ FN_ENTER; -+ -+#if DUMP_MEM_DURING_DIAG > 0 -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("dump finished"); -+#endif -+ -+ p += sprintf(p, "** Rx buf **\n"); -+ rxdesc = adev->rxdesc_start; -+ if (rxdesc) for (i = 0; i < RX_CNT; i++) { -+ rtl = (i == adev->rx_tail) ? " [tail]" : ""; -+ Ctl_8 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ if (Ctl_8 & DESC_CTL_HOSTOWN) -+ p += sprintf(p, "%02u (%02x) FULL%s\n", i, Ctl_8, rtl); -+ else -+ p += sprintf(p, "%02u (%02x) empty%s\n", i, Ctl_8, rtl); -+ rxdesc++; -+ } -+ p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free, -+ acx_queue_stopped(adev->ndev) ? "STOPPED" : "running"); -+ -+ p += sprintf(p, "** Tx buf %d blocks total, %d available, free list head %04x\n", -+ adev->acx_txbuf_numblocks, adev->acx_txbuf_blocks_free, adev->acx_txbuf_free); -+ txdesc = adev->txdesc_start; -+ if (txdesc) { -+ for (i = 0; i < TX_CNT; i++) { -+ thd = (i == adev->tx_head) ? " [head]" : ""; -+ ttl = (i == adev->tx_tail) ? " [tail]" : ""; -+ copy_from_slavemem (adev, (u8 *) &txd, (u32) txdesc, sizeof (txd)); -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ if (Ctl_8 & DESC_CTL_ACXDONE) -+ p += sprintf(p, "%02u ready to free (%02X)%s%s", i, Ctl_8, thd, ttl); -+ else if (Ctl_8 & DESC_CTL_HOSTOWN) -+ p += sprintf(p, "%02u available (%02X)%s%s", i, Ctl_8, thd, ttl); -+ else -+ p += sprintf(p, "%02u busy (%02X)%s%s", i, Ctl_8, thd, ttl); -+ tmp = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (tmp) { -+ p += sprintf (p, " %04x", tmp); -+ while ((tmp = read_slavemem32 (adev, (u32) tmp)) != 0x02000000) { -+ tmp <<= 5; -+ p += sprintf (p, " %04x", tmp); -+ } -+ } -+ p += sprintf (p, "\n"); -+ p += sprintf (p, " %04x: %04x %04x %04x %04x %04x %04x %04x %04x %04x %04x %02x %02x %02x %02x\n" -+ "%02x %02x %02x %02x %04x\n", -+ (u32) txdesc, -+ txd.pNextDesc.v, txd.HostMemPtr.v, txd.AcxMemPtr.v, txd.tx_time, -+ txd.total_length, txd.Reserved, -+ txd.dummy[0], txd.dummy[1], txd.dummy[2], txd.dummy[3], -+ txd.Ctl_8, txd.Ctl2_8, txd.error, txd.ack_failures, -+ txd.u.rts.rts_failures, txd.u.rts.rts_ok, txd.u.r1.rate, txd.u.r1.queue_ctrl, -+ txd.queue_info -+ ); -+ if (txd.AcxMemPtr.v) { -+ copy_from_slavemem (adev, buf, txd.AcxMemPtr.v, sizeof (buf)); -+ for (j = 0; (j < txd.total_length) && (j<(sizeof(buf)-4)); j+=16) { -+ p += sprintf (p, " "); -+ for (k = 0; (k < 16) && (j+k < txd.total_length); k++) { -+ p += sprintf (p, " %02x", buf[j+k+4]); -+ } -+ p += sprintf (p, "\n"); -+ } -+ } -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ } -+ -+ p += sprintf(p, -+ "\n" -+ "** Generic slave data **\n" -+ "irq_mask 0x%04x irq_status 0x%04x irq on acx 0x%04x\n" -+ "txbuf_start 0x%p, txbuf_area_size %u\n" -+ "txdesc_size %u, txdesc_start 0x%p\n" -+ "txhostdesc_start 0x%p, txhostdesc_area_size %u\n" -+ "txbuf start 0x%04x, txbuf size %d\n" -+ "rxdesc_start 0x%p\n" -+ "rxhostdesc_start 0x%p, rxhostdesc_area_size %u\n" -+ "rxbuf_start 0x%p, rxbuf_area_size %u\n", -+ adev->irq_mask, adev->irq_status, read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES), -+ adev->txbuf_start, adev->txbuf_area_size, -+ adev->txdesc_size, adev->txdesc_start, -+ adev->txhostdesc_start, adev->txhostdesc_area_size, -+ adev->acx_txbuf_start, adev->acx_txbuf_numblocks * adev->memblocksize, -+ adev->rxdesc_start, -+ adev->rxhostdesc_start, adev->rxhostdesc_area_size, -+ adev->rxbuf_start, adev->rxbuf_area_size); -+ FN_EXIT0; -+ return p; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxmem_proc_eeprom_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ int i; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < 0x400; i++) { -+ acxmem_read_eeprom_byte(adev, i, p++); -+ } -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+*/ -+void -+acxmem_set_interrupt_mask(acx_device_t *adev) -+{ -+ if (IS_ACX111(adev)) { -+ adev->irq_mask = (u16) ~(0 -+ | HOST_INT_RX_DATA -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ /* | HOST_INT_RX_COMPLETE */ -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ | HOST_INT_IV_ICV_FAILURE -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ | HOST_INT_OVERFLOW -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ | HOST_INT_FCS_THRESHOLD -+ | HOST_INT_UNKNOWN -+ ); -+ /* Or else acx100 won't signal cmd completion, right? */ -+ adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */ -+ } else { -+ adev->irq_mask = (u16) ~(0 -+ | HOST_INT_RX_DATA -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ /* | HOST_INT_RX_COMPLETE */ -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ /* | HOST_INT_IV_ICV_FAILURE */ -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ /* | HOST_INT_OVERFLOW */ -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ /* | HOST_INT_FCS_THRESHOLD */ -+ /* | HOST_INT_BEACON_MISSED */ -+ ); -+ adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */ -+ } -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm) -+{ -+ struct acx111_ie_tx_level tx_level; -+ -+ /* since it can be assumed that at least the Maxim radio has a -+ * maximum power output of 20dBm and since it also can be -+ * assumed that these values drive the DAC responsible for -+ * setting the linear Tx level, I'd guess that these values -+ * should be the corresponding linear values for a dBm value, -+ * in other words: calculate the values from that formula: -+ * Y [dBm] = 10 * log (X [mW]) -+ * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm) -+ * and you're done... -+ * Hopefully that's ok, but you never know if we're actually -+ * right... (especially since Windows XP doesn't seem to show -+ * actual Tx dBm values :-P) */ -+ -+ /* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the -+ * values are EXACTLY mW!!! Not sure about RFMD and others, -+ * though... */ -+ static const u8 dbm2val_maxim[21] = { -+ 63, 63, 63, 62, -+ 61, 61, 60, 60, -+ 59, 58, 57, 55, -+ 53, 50, 47, 43, -+ 38, 31, 23, 13, -+ 0 -+ }; -+ static const u8 dbm2val_rfmd[21] = { -+ 0, 0, 0, 1, -+ 2, 2, 3, 3, -+ 4, 5, 6, 8, -+ 10, 13, 16, 20, -+ 25, 32, 41, 50, -+ 63 -+ }; -+ const u8 *table; -+ -+ switch (adev->radio_type) { -+ case RADIO_MAXIM_0D: -+ table = &dbm2val_maxim[0]; -+ break; -+ case RADIO_RFMD_11: -+ case RADIO_RALINK_15: -+ table = &dbm2val_rfmd[0]; -+ break; -+ default: -+ printk("%s: unknown/unsupported radio type, " -+ "cannot modify tx power level yet!\n", -+ adev->ndev->name); -+ return NOT_OK; -+ } -+ /* -+ * The hx4700 EEPROM, at least, only supports 1 power setting. The configure -+ * routine matches the PA bias with the gain, so just use its default value. -+ * The values are: 0x2b for the gain and 0x03 for the PA bias. The firmware -+ * writes the gain level to the Tx gain control DAC and the PA bias to the Maxim -+ * radio's PA bias register. The firmware limits itself to 0 - 64 when writing to the -+ * gain control DAC. -+ * -+ * Physically between the ACX and the radio, higher Tx gain control DAC values result -+ * in less power output; 0 volts to the Maxim radio results in the highest output power -+ * level, which I'm assuming matches up with 0 in the Tx Gain DAC register. -+ * -+ * Although there is only the 1 power setting, one of the radio firmware functions adjusts -+ * the transmit power level up and down. That function is called by the ACX FIQ handler -+ * under certain conditions. -+ */ -+ tx_level.level = 1; -+ //return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); -+ -+ printk("%s: changing radio power level to %u dBm (%u)\n", -+ adev->ndev->name, level_dbm, table[level_dbm]); -+ acxmem_s_write_phy_reg(adev, 0x11, table[level_dbm]); -+ -+ return 0; -+} -+ -+void acxmem_e_release(struct device *dev) { -+} -+ -+/*********************************************************************** -+** acx_cs part -+** -+** called by pcmcia card service -+*/ -+ -+/* -+ The event() function is this driver's Card Services event handler. -+ It will be called by Card Services when an appropriate card status -+ event is received. The config() and release() entry points are -+ used to configure or release a socket, in response to card -+ insertion and ejection events. They are invoked from the acx_cs -+ event handler. -+*/ -+ -+static int acx_cs_config(struct pcmcia_device *link); -+static void acx_cs_release(struct pcmcia_device *link); -+ -+/* -+ The attach() and detach() entry points are used to create and destroy -+ "instances" of the driver, where each instance represents everything -+ needed to manage one actual PCMCIA card. -+*/ -+ -+static void acx_cs_detach(struct pcmcia_device *p_dev); -+ -+/* -+ You'll also need to prototype all the functions that will actually -+ be used to talk to your device. See 'pcmem_cs' for a good example -+ of a fully self-sufficient driver; the other drivers rely more or -+ less on other parts of the kernel. -+*/ -+ -+/* -+ A linked list of "instances" of the acxnet device. Each actual -+ PCMCIA card corresponds to one device instance, and is described -+ by one struct pcmcia_device structure (defined in ds.h). -+ -+ You may not want to use a linked list for this -- for example, the -+ memory card driver uses an array of struct pcmcia_device pointers, where minor -+ device numbers are used to derive the corresponding array index. -+*/ -+ -+/* -+ A driver needs to provide a dev_node_t structure for each device -+ on a card. In some cases, there is only one device per card (for -+ example, ethernet cards, modems). In other cases, there may be -+ many actual or logical devices (SCSI adapters, memory cards with -+ multiple partitions). The dev_node_t structures need to be kept -+ in a linked list starting at the 'dev' field of a struct pcmcia_device -+ structure. We allocate them in the card's private data structure, -+ because they generally shouldn't be allocated dynamically. -+ -+ In this case, we also provide a flag to indicate if a device is -+ "stopped" due to a power management event, or card ejection. The -+ device IO routines can use a flag like this to throttle IO to a -+ card that is not ready to accept it. -+*/ -+ -+ -+/*====================================================================== -+ -+ acx_attach() creates an "instance" of the driver, allocating -+ local data structures for one device. The device is registered -+ with Card Services. -+ -+ The dev_link structure is initialized, but we don't actually -+ configure the card at this point -- we wait until we receive a -+ card insertion event. -+ -+ ======================================================================*/ -+ -+static int acx_cs_probe(struct pcmcia_device *link) -+{ -+ local_info_t *local; -+ struct net_device *ndev; -+ -+ DEBUG(0, "acx_attach()\n"); -+ -+ ndev = alloc_netdev(sizeof(acx_device_t), "wlan%d", dummy_netdev_init); -+ if (!ndev) { -+ printk("acx: no memory for netdevice struct\n"); -+ return -ENOMEM; -+ } -+ -+ /* Interrupt setup */ -+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; -+ link->irq.IRQInfo1 = IRQ_LEVEL_ID; -+ link->irq.Handler = acxmem_i_interrupt; -+ link->irq.Instance = ndev; -+ -+ /* -+ General socket configuration defaults can go here. In this -+ client, we assume very little, and rely on the CIS for almost -+ everything. In most clients, many details (i.e., number, sizes, -+ and attributes of IO windows) are fixed by the nature of the -+ device, and can be hard-wired here. -+ */ -+ link->conf.Attributes = CONF_ENABLE_IRQ; -+ link->conf.IntType = INT_MEMORY_AND_IO; -+ link->conf.Present = PRESENT_OPTION | PRESENT_COPY; -+ -+ /* Allocate space for private device-specific data */ -+ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); -+ if (!local) { -+ printk(KERN_ERR "acx_cs: no memory for new device\n"); -+ return -ENOMEM; -+ } -+ local->ndev = ndev; -+ -+ link->priv = local; -+ -+ return acx_cs_config(link); -+} /* acx_attach */ -+ -+/*====================================================================== -+ -+ This deletes a driver "instance". The device is de-registered -+ with Card Services. If it has been released, all local data -+ structures are freed. Otherwise, the structures will be freed -+ when the device is released. -+ -+ ======================================================================*/ -+ -+static void acx_cs_detach(struct pcmcia_device *link) -+{ -+ DEBUG(0, "acx_detach(0x%p)\n", link); -+ -+ -+ if ( ((local_info_t*)link->priv)->ndev ) { -+ acxmem_e_close( ((local_info_t*)link->priv)->ndev ); -+ } -+ -+ acx_cs_release(link); -+ -+ ((local_info_t*)link->priv)->ndev = NULL; -+ -+ kfree(link->priv); -+} /* acx_detach */ -+ -+/*====================================================================== -+ -+ acx_config() is scheduled to run after a CARD_INSERTION event -+ is received, to configure the PCMCIA socket, and to make the -+ device available to the system. -+ -+ ======================================================================*/ -+ -+#define CS_CHECK(fn, ret) \ -+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) -+ -+static int acx_cs_config(struct pcmcia_device *link) -+{ -+ tuple_t tuple; -+ cisparse_t parse; -+ local_info_t *local = link->priv; -+ int last_fn, last_ret; -+ u_char buf[64]; -+ win_req_t req; -+ memreq_t map; -+// int i; -+// acx_device_t *adev; -+ -+// adev = (acx_device_t *)link->priv; -+ -+ DEBUG(0, "acx_cs_config(0x%p)\n", link); -+ -+ /* -+ In this loop, we scan the CIS for configuration table entries, -+ each of which describes a valid card configuration, including -+ voltage, IO window, memory window, and interrupt settings. -+ -+ We make no assumptions about the card to be configured: we use -+ just the information available in the CIS. In an ideal world, -+ this would work for any PCMCIA card, but it requires a complete -+ and accurate CIS. In practice, a driver usually "knows" most of -+ these things without consulting the CIS, and most client drivers -+ will only use the CIS to fill in implementation-defined details. -+ */ -+ tuple.Attributes = 0; -+ tuple.TupleData = (cisdata_t *)buf; -+ tuple.TupleDataMax = sizeof(buf); -+ tuple.TupleOffset = 0; -+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; -+ -+ /* don't trust the CIS on this; Linksys got it wrong */ -+ //link->conf.Present = 0x63; -+ -+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); -+ while (1) { -+ cistpl_cftable_entry_t dflt = { 0 }; -+ cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); -+ if (pcmcia_get_tuple_data(link, &tuple) != 0 || -+ pcmcia_parse_tuple(link, &tuple, &parse) != 0) -+ goto next_entry; -+ -+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; -+ if (cfg->index == 0) goto next_entry; -+ link->conf.ConfigIndex = cfg->index; -+ -+ /* Does this card need audio output? */ -+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) { -+ link->conf.Attributes |= CONF_ENABLE_SPKR; -+ link->conf.Status = CCSR_AUDIO_ENA; -+ } -+ -+ /* Use power settings for Vcc and Vpp if present */ -+ /* Note that the CIS values need to be rescaled */ -+ if (cfg->vpp1.present & (1<conf.Vpp = -+ cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; -+ else if (dflt.vpp1.present & (1<conf.Vpp = -+ dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; -+ -+ /* Do we need to allocate an interrupt? */ -+ if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) -+ link->conf.Attributes |= CONF_ENABLE_IRQ; -+ if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { -+ cistpl_mem_t *mem = -+ (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; -+// req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_AM|WIN_ENABLE|WIN_USE_WAIT; -+ req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE|WIN_USE_WAIT; -+ req.Base = mem->win[0].host_addr; -+ req.Size = mem->win[0].len; -+ req.Size=0x1000; -+ req.AccessSpeed = 0; -+ if (pcmcia_request_window(&link, &req, &link->win) != 0) -+ goto next_entry; -+ map.Page = 0; map.CardOffset = mem->win[0].card_addr; -+ if (pcmcia_map_mem_page(link->win, &map) != 0) -+ goto next_entry; -+ else -+ printk(KERN_INFO "MEMORY WINDOW FOUND!!!\n"); -+ } -+ /* If we got this far, we're cool! */ -+ break; -+ -+ next_entry: -+ CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); -+ } -+ -+ if (link->conf.Attributes & CONF_ENABLE_IRQ) { -+ printk(KERN_INFO "requesting Irq...\n"); -+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); -+ } -+ -+ /* -+ This actually configures the PCMCIA socket -- setting up -+ the I/O windows and the interrupt mapping, and putting the -+ card and host interface into "Memory and IO" mode. -+ */ -+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); -+ DEBUG(0,"RequestConfiguration OK\n"); -+ -+ -+ memwin.Base=req.Base; -+ memwin.Size=req.Size; -+ -+ acx_init_netdev(local->ndev, &link->dev, memwin.Base, memwin.Size, link->irq.AssignedIRQ); -+ -+#if 1 -+ /* -+ At this point, the dev_node_t structure(s) need to be -+ initialized and arranged in a linked list at link->dev_node. -+ */ -+ strcpy(local->node.dev_name, local->ndev->name ); -+ local->node.major = local->node.minor = 0; -+ link->dev_node = &local->node; -+ -+ /* Finally, report what we've done */ -+ printk(KERN_INFO "%s: index 0x%02x: ", -+ local->ndev->name, link->conf.ConfigIndex); -+#endif -+ if (link->conf.Attributes & CONF_ENABLE_IRQ) -+ printk("irq %d", link->irq.AssignedIRQ); -+ if (link->io.NumPorts1) -+ printk(", io 0x%04x-0x%04x", link->io.BasePort1, -+ link->io.BasePort1+link->io.NumPorts1-1); -+ if (link->io.NumPorts2) -+ printk(" & 0x%04x-0x%04x", link->io.BasePort2, -+ link->io.BasePort2+link->io.NumPorts2-1); -+ if (link->win) -+ printk(", mem 0x%06lx-0x%06lx\n", req.Base, -+ req.Base+req.Size-1); -+ return 0; -+ -+ cs_failed: -+ cs_error(link, last_fn, last_ret); -+ acx_cs_release(link); -+ return -ENODEV; -+} /* acx_config */ -+ -+/*====================================================================== -+ -+ After a card is removed, acx_release() will unregister the -+ device, and release the PCMCIA configuration. If the device is -+ still open, this will be postponed until it is closed. -+ -+ ======================================================================*/ -+ -+static void acx_cs_release(struct pcmcia_device *link) -+{ -+ DEBUG(0, "acx_release(0x%p)\n", link); -+ acxmem_e_remove(link); -+ pcmcia_disable_device(link); -+} -+ -+static int acx_cs_suspend(struct pcmcia_device *link) -+{ -+ local_info_t *local = link->priv; -+ -+ pm_message_t state; -+ acxmem_e_suspend ( local->ndev, state); -+ /* Already done in suspend -+ * netif_device_detach(local->ndev); */ -+ -+ return 0; -+} -+ -+static int acx_cs_resume(struct pcmcia_device *link) -+{ -+ local_info_t *local = link->priv; -+ -+ FN_ENTER; -+ resume_ndev = local->ndev; -+ -+ schedule_work( &fw_resume_work ); -+ -+ /* Already done in suspend -+ if (link->open) { -+ // do we need reset for ACX, if so what function nane is ? -+ //reset_acx_card(local->eth_dev); -+ netif_device_attach(local->ndev); -+ } */ -+ -+ FN_EXIT0; -+ return 0; -+} -+ -+static struct pcmcia_device_id acx_ids[] = { -+ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x8402), -+ PCMCIA_DEVICE_MANF_CARD(0x0250, 0xb001), -+ PCMCIA_DEVICE_NULL, -+}; -+MODULE_DEVICE_TABLE(pcmcia, acx_ids); -+ -+static struct pcmcia_driver acx_driver = { -+ .owner = THIS_MODULE, -+ .drv = { -+ .name = "acx_cs", -+ }, -+ .probe = acx_cs_probe, -+ .remove = acx_cs_detach, -+ .id_table = acx_ids, -+ .suspend = acx_cs_suspend, -+ .resume = acx_cs_resume, -+}; -+ -+int acx_cs_init(void) -+{ -+ /* return success if at least one succeeded */ -+ DEBUG(0, "acxcs_init()\n"); -+ return pcmcia_register_driver(&acx_driver); -+} -+ -+void acx_cs_cleanup(void) -+{ -+ pcmcia_unregister_driver(&acx_driver); -+} -+ -+/* -+ This program is free software; you can redistribute it and/or -+ modify it under the terms of the GNU General Public License -+ as published by the Free Software Foundation; either version 2 -+ of the License, or (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ In addition: -+ -+ Redistribution and use in source and binary forms, with or without -+ modification, are permitted provided that the following conditions -+ are met: -+ -+ 1. Redistributions of source code must retain the above copyright -+ notice, this list of conditions and the following disclaimer. -+ 2. Redistributions in binary form must reproduce the above copyright -+ notice, this list of conditions and the following disclaimer in the -+ documentation and/or other materials provided with the distribution. -+ 3. The name of the author may not be used to endorse or promote -+ products derived from this software without specific prior written -+ permission. -+ -+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, -+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING -+ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -+ POSSIBILITY OF SUCH DAMAGE. -+*/ -+ -+MODULE_DESCRIPTION( "ACX Cardbus Driver" ); -+MODULE_LICENSE( "GPL" ); -+ -Index: linux-2.6.22/drivers/net/wireless/acx/htcsable_acx.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/htcsable_acx.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,118 @@ -+/* -+ * WLAN (TI TNETW1100B) support in the HTC Sable -+ * -+ * Copyright (c) 2006 SDG Systems, LLC -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * 28-March-2006 Todd Blumer -+ */ -+ -+ -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx_hw.h" -+ -+#define WLAN_BASE PXA_CS2_PHYS -+ -+/* -+off: b15 c8 d3 -+on: d3 c8 b5 b5- -+*/ -+ -+#define GPIO_NR_HTCSABLE_ACX111 111 -+ -+static int -+htcsable_wlan_stop( void ); -+ -+static int -+htcsable_wlan_start( void ) -+{ -+ printk( "htcsable_wlan_start\n" ); -+ -+ /*asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<" ); -+MODULE_DESCRIPTION( "WLAN driver for HTC Sable" ); -+MODULE_LICENSE( "GPL" ); -+ -Index: linux-2.6.22/drivers/net/wireless/acx/htcuniversal_acx.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/htcuniversal_acx.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,108 @@ -+/* -+ * WLAN (TI TNETW1100B) support in the HTC Universal -+ * -+ * Copyright (c) 2006 SDG Systems, LLC -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * 28-March-2006 Todd Blumer -+ */ -+ -+ -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx_hw.h" -+ -+#define WLAN_BASE PXA_CS2_PHYS -+ -+ -+static int -+htcuniversal_wlan_start( void ) -+{ -+ htcuniversal_egpio_enable(1<" ); -+MODULE_DESCRIPTION( "WLAN driver for HTC Universal" ); -+MODULE_LICENSE( "GPL" ); -+ -Index: linux-2.6.22/drivers/net/wireless/acx/hx4700_acx.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/hx4700_acx.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,108 @@ -+/* -+ * WLAN (TI TNETW1100B) support in the hx470x. -+ * -+ * Copyright (c) 2006 SDG Systems, LLC -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * 28-March-2006 Todd Blumer -+ */ -+ -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "acx_hw.h" -+ -+#define WLAN_OFFSET 0x1000000 -+#define WLAN_BASE (PXA_CS5_PHYS+WLAN_OFFSET) -+ -+ -+static int -+hx4700_wlan_start( void ) -+{ -+ SET_HX4700_GPIO( WLAN_RESET_N, 0 ); -+ mdelay(5); -+ hx4700_egpio_enable( EGPIO0_VCC_3V3_EN ); -+ mdelay(100); -+ hx4700_egpio_enable( EGPIO7_VCC_3V3_WL_EN ); -+ mdelay(150); -+ hx4700_egpio_enable( EGPIO1_WL_VREG_EN | EGPIO2_VCC_2V1_WL_EN | -+ EGPIO6_WL1V8_EN ); -+ mdelay(10); -+ SET_HX4700_GPIO( WLAN_RESET_N, 1 ); -+ mdelay(50); -+ led_trigger_event_shared(hx4700_radio_trig, LED_FULL); -+ return 0; -+} -+ -+static int -+hx4700_wlan_stop( void ) -+{ -+ hx4700_egpio_disable( EGPIO0_VCC_3V3_EN | EGPIO1_WL_VREG_EN | -+ EGPIO7_VCC_3V3_WL_EN | EGPIO2_VCC_2V1_WL_EN | -+ EGPIO6_WL1V8_EN ); -+ SET_HX4700_GPIO( WLAN_RESET_N, 0 ); -+ led_trigger_event_shared(hx4700_radio_trig, LED_OFF); -+ return 0; -+} -+ -+static struct resource acx_resources[] = { -+ [0] = { -+ .start = WLAN_BASE, -+ .end = WLAN_BASE + 0x20, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = HX4700_IRQ(WLAN_IRQ_N), -+ .end = HX4700_IRQ(WLAN_IRQ_N), -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct acx_hardware_data acx_data = { -+ .start_hw = hx4700_wlan_start, -+ .stop_hw = hx4700_wlan_stop, -+}; -+ -+static struct platform_device acx_device = { -+ .name = "acx-mem", -+ .dev = { -+ .platform_data = &acx_data, -+ }, -+ .num_resources = ARRAY_SIZE( acx_resources ), -+ .resource = acx_resources, -+}; -+ -+static int __init -+hx4700_wlan_init( void ) -+{ -+ printk( "hx4700_wlan_init: acx-mem platform_device_register\n" ); -+ return platform_device_register( &acx_device ); -+} -+ -+ -+static void __exit -+hx4700_wlan_exit( void ) -+{ -+ platform_device_unregister( &acx_device ); -+} -+ -+module_init( hx4700_wlan_init ); -+module_exit( hx4700_wlan_exit ); -+ -+MODULE_AUTHOR( "Todd Blumer " ); -+MODULE_DESCRIPTION( "WLAN driver for iPAQ hx4700" ); -+MODULE_LICENSE( "GPL" ); -+ -Index: linux-2.6.22/drivers/net/wireless/acx/ioctl.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/ioctl.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,2748 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+#include -+#include -+#include -+/* #include */ /* required for 2.4.x kernels; verify_write() */ -+#include -+#include -+#include -+ -+#include "acx.h" -+ -+ -+/*********************************************************************** -+*/ -+ -+/* channel frequencies -+ * TODO: Currently, every other 802.11 driver keeps its own copy of this. In -+ * the long run this should be integrated into ieee802_11.h or wireless.h or -+ * whatever IEEE802.11x framework evolves */ -+static const u16 acx_channel_freq[] = { -+ 2412, 2417, 2422, 2427, 2432, 2437, 2442, -+ 2447, 2452, 2457, 2462, 2467, 2472, 2484, -+}; -+ -+ -+/*********************************************************************** -+** acx_ioctl_commit -+*/ -+static int -+acx_ioctl_commit(struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) -+ acx_s_update_card_settings(adev); -+ acx_sem_unlock(adev); -+ -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_name( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ static const char * const names[] = { "IEEE 802.11b+/g+", "IEEE 802.11b+" }; -+ -+ strcpy(wrqu->name, names[IS_ACX111(adev) ? 0 : 1]); -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_freq -+*/ -+static int -+acx_ioctl_set_freq( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int channel = -1; -+ unsigned int mult = 1; -+ int result; -+ -+ FN_ENTER; -+ -+ if (wrqu->freq.e == 0 && wrqu->freq.m <= 1000) { -+ /* Setting by channel number */ -+ channel = wrqu->freq.m; -+ } else { -+ /* If setting by frequency, convert to a channel */ -+ int i; -+ -+ for (i = 0; i < (6 - wrqu->freq.e); i++) -+ mult *= 10; -+ -+ for (i = 1; i <= 14; i++) -+ if (wrqu->freq.m == acx_channel_freq[i - 1] * mult) -+ channel = i; -+ } -+ -+ if (channel > 14) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ acx_sem_lock(adev); -+ -+ adev->channel = channel; -+ /* hmm, the following code part is strange, but this is how -+ * it was being done before... */ -+ log(L_IOCTL, "Changing to channel %d\n", channel); -+ SET_BIT(adev->set_mask, GETSET_CHANNEL); -+ -+ result = -EINPROGRESS; /* need to call commit handler */ -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static inline int -+acx_ioctl_get_freq( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ wrqu->freq.e = 0; -+ wrqu->freq.m = adev->channel; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_mode -+*/ -+static int -+acx_ioctl_set_mode( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ switch (wrqu->mode) { -+ case IW_MODE_AUTO: -+ adev->mode = ACX_MODE_OFF; -+ break; -+ case IW_MODE_MONITOR: -+ adev->mode = ACX_MODE_MONITOR; -+ break; -+ case IW_MODE_ADHOC: -+ adev->mode = ACX_MODE_0_ADHOC; -+ break; -+ case IW_MODE_INFRA: -+ adev->mode = ACX_MODE_2_STA; -+ break; -+ case IW_MODE_MASTER: -+ printk("acx: master mode (HostAP) is very, very " -+ "experimental! It might work partially, but " -+ "better get prepared for nasty surprises " -+ "at any time\n"); -+ adev->mode = ACX_MODE_3_AP; -+ break; -+ case IW_MODE_REPEAT: -+ case IW_MODE_SECOND: -+ default: -+ result = -EOPNOTSUPP; -+ goto end_unlock; -+ } -+ -+ log(L_ASSOC, "new adev->mode=%d\n", adev->mode); -+ SET_BIT(adev->set_mask, GETSET_MODE); -+ result = -EINPROGRESS; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_mode( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = 0; -+ -+ switch (adev->mode) { -+ case ACX_MODE_OFF: -+ wrqu->mode = IW_MODE_AUTO; break; -+ case ACX_MODE_MONITOR: -+ wrqu->mode = IW_MODE_MONITOR; break; -+ case ACX_MODE_0_ADHOC: -+ wrqu->mode = IW_MODE_ADHOC; break; -+ case ACX_MODE_2_STA: -+ wrqu->mode = IW_MODE_INFRA; break; -+ case ACX_MODE_3_AP: -+ wrqu->mode = IW_MODE_MASTER; break; -+ default: -+ result = -EOPNOTSUPP; -+ } -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_set_sens( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->sens; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ acx_sem_lock(adev); -+ -+ adev->sensitivity = (1 == vwrq->disabled) ? 0 : vwrq->value; -+ SET_BIT(adev->set_mask, GETSET_SENSITIVITY); -+ -+ acx_sem_unlock(adev); -+ -+ return -EINPROGRESS; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_sens( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->sens; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ if (IS_USB(adev)) -+ /* setting the PHY reg via fw cmd doesn't work yet */ -+ return -EOPNOTSUPP; -+ -+ /* acx_sem_lock(adev); */ -+ -+ vwrq->value = adev->sensitivity; -+ vwrq->disabled = (vwrq->value == 0); -+ vwrq->fixed = 1; -+ -+ /* acx_sem_unlock(adev); */ -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_ap -+** -+** Sets the MAC address of the AP to associate with -+*/ -+static int -+acx_ioctl_set_ap( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct sockaddr *awrq = &wrqu->ap_addr; -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = 0; -+ const u8 *ap; -+ -+ FN_ENTER; -+ if (NULL == awrq) { -+ result = -EFAULT; -+ goto end; -+ } -+ if (ARPHRD_ETHER != awrq->sa_family) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ ap = awrq->sa_data; -+ acxlog_mac(L_IOCTL, "set AP=", ap, "\n"); -+ -+ MAC_COPY(adev->ap, ap); -+ -+ /* We want to start rescan in managed or ad-hoc mode, -+ ** otherwise just set adev->ap. -+ ** "iwconfig ap mode managed": we must be able -+ ** to set ap _first_ and _then_ set mode */ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ /* FIXME: if there is a convention on what zero AP means, -+ ** please add a comment about that. I don't know of any --vda */ -+ if (mac_is_zero(ap)) { -+ /* "off" == 00:00:00:00:00:00 */ -+ MAC_BCAST(adev->ap); -+ log(L_IOCTL, "Not reassociating\n"); -+ } else { -+ log(L_IOCTL, "Forcing reassociation\n"); -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ } -+ break; -+ } -+ result = -EINPROGRESS; -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_ap( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct sockaddr *awrq = &wrqu->ap_addr; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ if (ACX_STATUS_4_ASSOCIATED == adev->status) { -+ /* as seen in Aironet driver, airo.c */ -+ MAC_COPY(awrq->sa_data, adev->bssid); -+ } else { -+ MAC_ZERO(awrq->sa_data); -+ } -+ awrq->sa_family = ARPHRD_ETHER; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_aplist -+** -+** Deprecated in favor of iwscan. -+** We simply return the list of currently available stations in range, -+** don't do a new scan. -+*/ -+static int -+acx_ioctl_get_aplist( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->data; -+ acx_device_t *adev = ndev2adev(ndev); -+ struct sockaddr *address = (struct sockaddr *) extra; -+ struct iw_quality qual[IW_MAX_AP]; -+ int i, cur; -+ int result = OK; -+ -+ FN_ENTER; -+ -+ /* we have AP list only in STA mode */ -+ if (ACX_MODE_2_STA != adev->mode) { -+ result = -EOPNOTSUPP; -+ goto end; -+ } -+ -+ cur = 0; -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ struct client *bss = &adev->sta_list[i]; -+ if (!bss->used) continue; -+ MAC_COPY(address[cur].sa_data, bss->bssid); -+ address[cur].sa_family = ARPHRD_ETHER; -+ qual[cur].level = bss->sir; -+ qual[cur].noise = bss->snr; -+#ifndef OLD_QUALITY -+ qual[cur].qual = acx_signal_determine_quality(qual[cur].level, -+ qual[cur].noise); -+#else -+ qual[cur].qual = (qual[cur].noise <= 100) ? -+ 100 - qual[cur].noise : 0; -+#endif -+ /* no scan: level/noise/qual not updated: */ -+ qual[cur].updated = 0; -+ cur++; -+ } -+ if (cur) { -+ dwrq->flags = 1; -+ memcpy(extra + sizeof(struct sockaddr)*cur, &qual, -+ sizeof(struct iw_quality)*cur); -+ } -+ dwrq->length = cur; -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_set_scan( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* don't start scan if device is not up yet */ -+ if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { -+ result = -EAGAIN; -+ goto end_unlock; -+ } -+ -+ /* This is NOT a rescan for new AP! -+ ** Do not use SET_BIT(GETSET_RESCAN); */ -+ acx_s_cmd_start_scan(adev); -+ result = OK; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+/* end: */ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_s_scan_add_station -+*/ -+/* helper. not sure whether it's really a _s_leeping fn */ -+static char* -+acx_s_scan_add_station( -+ acx_device_t *adev, -+ char *ptr, -+ char *end_buf, -+ struct client *bss) -+{ -+ struct iw_event iwe; -+ char *ptr_rate; -+ -+ FN_ENTER; -+ -+ /* MAC address has to be added first */ -+ iwe.cmd = SIOCGIWAP; -+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER; -+ MAC_COPY(iwe.u.ap_addr.sa_data, bss->bssid); -+ acxlog_mac(L_IOCTL, "scan, station address: ", bss->bssid, "\n"); -+ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_ADDR_LEN); -+ -+ /* Add ESSID */ -+ iwe.cmd = SIOCGIWESSID; -+ iwe.u.data.length = bss->essid_len; -+ iwe.u.data.flags = 1; -+ log(L_IOCTL, "scan, essid: %s\n", bss->essid); -+ ptr = iwe_stream_add_point(ptr, end_buf, &iwe, bss->essid); -+ -+ /* Add mode */ -+ iwe.cmd = SIOCGIWMODE; -+ if (bss->cap_info & (WF_MGMT_CAP_ESS | WF_MGMT_CAP_IBSS)) { -+ if (bss->cap_info & WF_MGMT_CAP_ESS) -+ iwe.u.mode = IW_MODE_MASTER; -+ else -+ iwe.u.mode = IW_MODE_ADHOC; -+ log(L_IOCTL, "scan, mode: %d\n", iwe.u.mode); -+ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_UINT_LEN); -+ } -+ -+ /* Add frequency */ -+ iwe.cmd = SIOCGIWFREQ; -+ iwe.u.freq.m = acx_channel_freq[bss->channel - 1] * 100000; -+ iwe.u.freq.e = 1; -+ log(L_IOCTL, "scan, frequency: %d\n", iwe.u.freq.m); -+ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_FREQ_LEN); -+ -+ /* Add link quality */ -+ iwe.cmd = IWEVQUAL; -+ /* FIXME: these values should be expressed in dBm, but we don't know -+ * how to calibrate it yet */ -+ iwe.u.qual.level = bss->sir; -+ iwe.u.qual.noise = bss->snr; -+#ifndef OLD_QUALITY -+ iwe.u.qual.qual = acx_signal_determine_quality(iwe.u.qual.level, -+ iwe.u.qual.noise); -+#else -+ iwe.u.qual.qual = (iwe.u.qual.noise <= 100) ? -+ 100 - iwe.u.qual.noise : 0; -+#endif -+ iwe.u.qual.updated = 7; -+ log(L_IOCTL, "scan, link quality: %d/%d/%d\n", -+ iwe.u.qual.level, iwe.u.qual.noise, iwe.u.qual.qual); -+ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_QUAL_LEN); -+ -+ /* Add encryption */ -+ iwe.cmd = SIOCGIWENCODE; -+ if (bss->cap_info & WF_MGMT_CAP_PRIVACY) -+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; -+ else -+ iwe.u.data.flags = IW_ENCODE_DISABLED; -+ iwe.u.data.length = 0; -+ log(L_IOCTL, "scan, encryption flags: %X\n", iwe.u.data.flags); -+ ptr = iwe_stream_add_point(ptr, end_buf, &iwe, bss->essid); -+ -+ /* add rates */ -+ iwe.cmd = SIOCGIWRATE; -+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; -+ ptr_rate = ptr + IW_EV_LCP_LEN; -+ -+ { -+ u16 rate = bss->rate_cap; -+ const u8* p = acx_bitpos2ratebyte; -+ while (rate) { -+ if (rate & 1) { -+ iwe.u.bitrate.value = *p * 500000; /* units of 500kb/s */ -+ log(L_IOCTL, "scan, rate: %d\n", iwe.u.bitrate.value); -+ ptr_rate = iwe_stream_add_value(ptr, ptr_rate, end_buf, -+ &iwe, IW_EV_PARAM_LEN); -+ } -+ rate >>= 1; -+ p++; -+ }} -+ -+ if ((ptr_rate - ptr) > (ptrdiff_t)IW_EV_LCP_LEN) -+ ptr = ptr_rate; -+ -+ /* drop remaining station data items for now */ -+ -+ FN_EXIT0; -+ return ptr; -+} -+ -+ -+/*********************************************************************** -+ * acx_ioctl_get_scan -+ */ -+static int -+acx_ioctl_get_scan( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->data; -+ acx_device_t *adev = ndev2adev(ndev); -+ char *ptr = extra; -+ int i; -+ int result = OK; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* no scan available if device is not up yet */ -+ if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { -+ log(L_IOCTL, "iface not up yet\n"); -+ result = -EAGAIN; -+ goto end_unlock; -+ } -+ -+#ifdef ENODATA_TO_BE_USED_AFTER_SCAN_ERROR_ONLY -+ if (adev->bss_table_count == 0) { -+ /* no stations found */ -+ result = -ENODATA; -+ goto end_unlock; -+ } -+#endif -+ -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ struct client *bss = &adev->sta_list[i]; -+ if (!bss->used) continue; -+ ptr = acx_s_scan_add_station(adev, ptr, -+ extra + IW_SCAN_MAX_DATA, bss); -+ } -+ dwrq->length = ptr - extra; -+ dwrq->flags = 0; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+/* end: */ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_essid -+*/ -+static int -+acx_ioctl_set_essid( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->essid; -+ acx_device_t *adev = ndev2adev(ndev); -+ int len = dwrq->length; -+ int result; -+ -+ FN_ENTER; -+ -+ if (len < 0) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ log(L_IOCTL, "set ESSID '%*s', length %d, flags 0x%04X\n", -+ len, extra, len, dwrq->flags); -+ -+#if WIRELESS_EXT >= 21 -+ /* WE 21 gives real ESSID strlen, not +1 (trailing zero): -+ * see LKML "[patch] drivers/net/wireless: correct reported ssid lengths" */ -+ len += 1; -+#endif -+ -+ acx_sem_lock(adev); -+ -+ /* ESSID disabled? */ -+ if (0 == dwrq->flags) { -+ adev->essid_active = 0; -+ -+ } else { -+ if (len > IW_ESSID_MAX_SIZE) { -+ result = -E2BIG; -+ goto end_unlock; -+ } -+ -+ if (len >= sizeof(adev->essid)) -+ len = sizeof(adev->essid) - 1; -+ memcpy(adev->essid, extra, len); -+ adev->essid[len] = '\0'; -+ /* Paranoia: just in case there is a '\0'... */ -+ adev->essid_len = strlen(adev->essid); -+ adev->essid_active = 1; -+ } -+ -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ -+ result = -EINPROGRESS; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_essid( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->essid; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ dwrq->flags = adev->essid_active; -+ if (adev->essid_active) { -+ memcpy(extra, adev->essid, adev->essid_len); -+ extra[adev->essid_len] = '\0'; -+ dwrq->length = adev->essid_len + 1; -+ dwrq->flags = 1; -+ } -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_update_client_rates -+*/ -+static void -+acx_l_update_client_rates(acx_device_t *adev, u16 rate) -+{ -+ int i; -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ client_t *clt = &adev->sta_list[i]; -+ if (!clt->used) continue; -+ clt->rate_cfg = (clt->rate_cap & rate); -+ if (!clt->rate_cfg) { -+ /* no compatible rates left: kick client */ -+ acxlog_mac(L_ASSOC, "client ",clt->address," kicked: " -+ "rates are not compatible anymore\n"); -+ acx_l_sta_list_del(adev, clt); -+ continue; -+ } -+ clt->rate_cur &= clt->rate_cfg; -+ if (!clt->rate_cur) { -+ /* current rate become invalid, choose a valid one */ -+ clt->rate_cur = 1 << lowest_bit(clt->rate_cfg); -+ } -+ if (IS_ACX100(adev)) -+ clt->rate_100 = acx_bitpos2rate100[highest_bit(clt->rate_cur)]; -+ clt->fallback_count = clt->stepup_count = 0; -+ clt->ignore_count = 16; -+ } -+ switch (adev->mode) { -+ case ACX_MODE_2_STA: -+ if (adev->ap_client && !adev->ap_client->used) { -+ /* Owwww... we kicked our AP!! :) */ -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ } -+ } -+} -+ -+ -+/*********************************************************************** -+*/ -+/* maps bits from acx111 rate to rate in Mbits */ -+static const unsigned int -+acx111_rate_tbl[] = { -+ 1000000, /* 0 */ -+ 2000000, /* 1 */ -+ 5500000, /* 2 */ -+ 6000000, /* 3 */ -+ 9000000, /* 4 */ -+ 11000000, /* 5 */ -+ 12000000, /* 6 */ -+ 18000000, /* 7 */ -+ 22000000, /* 8 */ -+ 24000000, /* 9 */ -+ 36000000, /* 10 */ -+ 48000000, /* 11 */ -+ 54000000, /* 12 */ -+ 500000, /* 13, should not happen */ -+ 500000, /* 14, should not happen */ -+ 500000, /* 15, should not happen */ -+}; -+ -+/*********************************************************************** -+ * acx_ioctl_set_rate -+ */ -+static int -+acx_ioctl_set_rate( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->param; -+ acx_device_t *adev = ndev2adev(ndev); -+ u16 txrate_cfg = 1; -+ unsigned long flags; -+ int autorate; -+ int result = -EINVAL; -+ -+ FN_ENTER; -+ log(L_IOCTL, "rate %d fixed 0x%X disabled 0x%X flags 0x%X\n", -+ vwrq->value, vwrq->fixed, vwrq->disabled, vwrq->flags); -+ -+ if ((0 == vwrq->fixed) || (1 == vwrq->fixed)) { -+ int i = VEC_SIZE(acx111_rate_tbl)-1; -+ if (vwrq->value == -1) -+ /* "iwconfig rate auto" --> choose highest */ -+ vwrq->value = IS_ACX100(adev) ? 22000000 : 54000000; -+ while (i >= 0) { -+ if (vwrq->value == acx111_rate_tbl[i]) { -+ txrate_cfg <<= i; -+ i = 0; -+ break; -+ } -+ i--; -+ } -+ if (i == -1) { /* no matching rate */ -+ result = -EINVAL; -+ goto end; -+ } -+ } else { /* rate N, N<1000 (driver specific): we don't use this */ -+ result = -EOPNOTSUPP; -+ goto end; -+ } -+ /* now: only one bit is set in txrate_cfg, corresponding to -+ ** indicated rate */ -+ -+ autorate = (vwrq->fixed == 0) && (RATE111_1 != txrate_cfg); -+ if (autorate) { -+ /* convert 00100000 -> 00111111 */ -+ txrate_cfg = (txrate_cfg<<1)-1; -+ } -+ -+ if (IS_ACX100(adev)) { -+ txrate_cfg &= RATE111_ACX100_COMPAT; -+ if (!txrate_cfg) { -+ result = -ENOTSUPP; /* rate is not supported by acx100 */ -+ goto end; -+ } -+ } -+ -+ acx_sem_lock(adev); -+ acx_lock(adev, flags); -+ -+ adev->rate_auto = autorate; -+ adev->rate_oper = txrate_cfg; -+ adev->rate_basic = txrate_cfg; -+ /* only do that in auto mode, non-auto will be able to use -+ * one specific Tx rate only anyway */ -+ if (autorate) { -+ /* only use 802.11b base rates, for standard 802.11b H/W -+ * compatibility */ -+ adev->rate_basic &= RATE111_80211B_COMPAT; -+ } -+ adev->rate_bcast = 1 << lowest_bit(txrate_cfg); -+ if (IS_ACX100(adev)) -+ adev->rate_bcast100 = acx_rate111to100(adev->rate_bcast); -+ acx_l_update_ratevector(adev); -+ acx_l_update_client_rates(adev, txrate_cfg); -+ -+ /* Do/don't do tx rate fallback; beacon contents and rate */ -+ SET_BIT(adev->set_mask, SET_RATE_FALLBACK|SET_TEMPLATES); -+ result = -EINPROGRESS; -+ -+ acx_unlock(adev, flags); -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_rate -+*/ -+static int -+acx_ioctl_get_rate( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->param; -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ u16 rate; -+ -+ acx_lock(adev, flags); -+ rate = adev->rate_oper; -+ if (adev->ap_client) -+ rate = adev->ap_client->rate_cur; -+ vwrq->value = acx111_rate_tbl[highest_bit(rate)]; -+ vwrq->fixed = !adev->rate_auto; -+ vwrq->disabled = 0; -+ acx_unlock(adev, flags); -+ -+ return OK; -+} -+ -+static int -+acx_ioctl_set_rts( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->rts; -+ acx_device_t *adev = ndev2adev(ndev); -+ int val = vwrq->value; -+ -+ if (vwrq->disabled) -+ val = 2312; -+ if ((val < 0) || (val > 2312)) -+ return -EINVAL; -+ -+ adev->rts_threshold = val; -+ return OK; -+} -+ -+static inline int -+acx_ioctl_get_rts( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->rts; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ vwrq->value = adev->rts_threshold; -+ vwrq->disabled = (vwrq->value >= 2312); -+ vwrq->fixed = 1; -+ return OK; -+} -+ -+ -+#if ACX_FRAGMENTATION -+static int -+acx_ioctl_set_frag( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int val = vwrq->value; -+ -+ if (vwrq->disabled) -+ val = 32767; -+ else -+ if ((val < 256) || (val > 2347)) -+ return -EINVAL; -+ -+ adev->frag_threshold = val; -+ return OK; -+} -+ -+static inline int -+acx_ioctl_get_frag( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->frag; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ vwrq->value = adev->frag_threshold; -+ vwrq->disabled = (vwrq->value >= 2347); -+ vwrq->fixed = 1; -+ return OK; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_encode -+*/ -+static int -+acx_ioctl_set_encode( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->encoding; -+ acx_device_t *adev = ndev2adev(ndev); -+ int index; -+ int result; -+ -+ FN_ENTER; -+ -+ log(L_IOCTL, "set encoding flags=0x%04X, size=%d, key: %s\n", -+ dwrq->flags, dwrq->length, extra ? "set" : "No key"); -+ -+ acx_sem_lock(adev); -+ -+ index = (dwrq->flags & IW_ENCODE_INDEX) - 1; -+ -+ if (dwrq->length > 0) { -+ /* if index is 0 or invalid, use default key */ -+ if ((index < 0) || (index > 3)) -+ index = (int)adev->wep_current_index; -+ -+ if (0 == (dwrq->flags & IW_ENCODE_NOKEY)) { -+ if (dwrq->length > 29) -+ dwrq->length = 29; /* restrict it */ -+ -+ if (dwrq->length > 13) { -+ /* 29*8 == 232, WEP256 */ -+ adev->wep_keys[index].size = 29; -+ } else if (dwrq->length > 5) { -+ /* 13*8 == 104bit, WEP128 */ -+ adev->wep_keys[index].size = 13; -+ } else if (dwrq->length > 0) { -+ /* 5*8 == 40bit, WEP64 */ -+ adev->wep_keys[index].size = 5; -+ } else { -+ /* disable key */ -+ adev->wep_keys[index].size = 0; -+ } -+ -+ memset(adev->wep_keys[index].key, 0, -+ sizeof(adev->wep_keys[index].key)); -+ memcpy(adev->wep_keys[index].key, extra, dwrq->length); -+ } -+ } else { -+ /* set transmit key */ -+ if ((index >= 0) && (index <= 3)) -+ adev->wep_current_index = index; -+ else if (0 == (dwrq->flags & IW_ENCODE_MODE)) { -+ /* complain if we were not just setting -+ * the key mode */ -+ result = -EINVAL; -+ goto end_unlock; -+ } -+ } -+ -+ adev->wep_enabled = !(dwrq->flags & IW_ENCODE_DISABLED); -+ -+ if (dwrq->flags & IW_ENCODE_OPEN) { -+ adev->auth_alg = WLAN_AUTH_ALG_OPENSYSTEM; -+ adev->wep_restricted = 0; -+ -+ } else if (dwrq->flags & IW_ENCODE_RESTRICTED) { -+ adev->auth_alg = WLAN_AUTH_ALG_SHAREDKEY; -+ adev->wep_restricted = 1; -+ } -+ -+ /* set flag to make sure the card WEP settings get updated */ -+ SET_BIT(adev->set_mask, GETSET_WEP); -+ -+ log(L_IOCTL, "len=%d, key at 0x%p, flags=0x%X\n", -+ dwrq->length, extra, dwrq->flags); -+ -+ for (index = 0; index <= 3; index++) { -+ if (adev->wep_keys[index].size) { -+ log(L_IOCTL, "index=%d, size=%d, key at 0x%p\n", -+ adev->wep_keys[index].index, -+ (int) adev->wep_keys[index].size, -+ adev->wep_keys[index].key); -+ } -+ } -+ result = -EINPROGRESS; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_encode -+*/ -+static int -+acx_ioctl_get_encode( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->encoding; -+ acx_device_t *adev = ndev2adev(ndev); -+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; -+ -+ FN_ENTER; -+ -+ if (adev->wep_enabled == 0) { -+ dwrq->flags = IW_ENCODE_DISABLED; -+ } else { -+ if ((index < 0) || (index > 3)) -+ index = (int)adev->wep_current_index; -+ -+ dwrq->flags = (adev->wep_restricted == 1) ? -+ IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN; -+ dwrq->length = adev->wep_keys[index].size; -+ -+ memcpy(extra, adev->wep_keys[index].key, -+ adev->wep_keys[index].size); -+ } -+ -+ /* set the current index */ -+ SET_BIT(dwrq->flags, index + 1); -+ -+ log(L_IOCTL, "len=%d, key=%p, flags=0x%X\n", -+ dwrq->length, dwrq->pointer, -+ dwrq->flags); -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_set_power( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->power; -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = -EINPROGRESS; -+ -+ FN_ENTER; -+ -+ log(L_IOCTL, "set 802.11 powersave flags=0x%04X\n", vwrq->flags); -+ -+ acx_sem_lock(adev); -+ -+ if (vwrq->disabled) { -+ CLEAR_BIT(adev->ps_wakeup_cfg, PS_CFG_ENABLE); -+ SET_BIT(adev->set_mask, GETSET_POWER_80211); -+ goto end; -+ } -+ if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { -+ u16 ps_timeout = (vwrq->value * 1024) / 1000; -+ -+ if (ps_timeout > 255) -+ ps_timeout = 255; -+ log(L_IOCTL, "setting PS timeout value to %d time units " -+ "due to %dus\n", ps_timeout, vwrq->value); -+ adev->ps_hangover_period = ps_timeout; -+ } else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) { -+ u16 ps_periods = vwrq->value / 1000000; -+ -+ if (ps_periods > 255) -+ ps_periods = 255; -+ log(L_IOCTL, "setting PS period value to %d periods " -+ "due to %dus\n", ps_periods, vwrq->value); -+ adev->ps_listen_interval = ps_periods; -+ CLEAR_BIT(adev->ps_wakeup_cfg, PS_CFG_WAKEUP_MODE_MASK); -+ SET_BIT(adev->ps_wakeup_cfg, PS_CFG_WAKEUP_EACH_ITVL); -+ } -+ -+ switch (vwrq->flags & IW_POWER_MODE) { -+ /* FIXME: are we doing the right thing here? */ -+ case IW_POWER_UNICAST_R: -+ CLEAR_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS); -+ break; -+ case IW_POWER_MULTICAST_R: -+ SET_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS); -+ break; -+ case IW_POWER_ALL_R: -+ SET_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS); -+ break; -+ case IW_POWER_ON: -+ break; -+ default: -+ log(L_IOCTL, "unknown PS mode\n"); -+ result = -EINVAL; -+ goto end; -+ } -+ -+ SET_BIT(adev->ps_wakeup_cfg, PS_CFG_ENABLE); -+ SET_BIT(adev->set_mask, GETSET_POWER_80211); -+end: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_power( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->power; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ log(L_IOCTL, "Get 802.11 Power Save flags = 0x%04X\n", vwrq->flags); -+ vwrq->disabled = ((adev->ps_wakeup_cfg & PS_CFG_ENABLE) == 0); -+ if (vwrq->disabled) -+ goto end; -+ -+ if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { -+ vwrq->value = adev->ps_hangover_period * 1000 / 1024; -+ vwrq->flags = IW_POWER_TIMEOUT; -+ } else { -+ vwrq->value = adev->ps_listen_interval * 1000000; -+ vwrq->flags = IW_POWER_PERIOD|IW_POWER_RELATIVE; -+ } -+ if (adev->ps_options & PS_OPT_STILL_RCV_BCASTS) -+ SET_BIT(vwrq->flags, IW_POWER_ALL_R); -+ else -+ SET_BIT(vwrq->flags, IW_POWER_UNICAST_R); -+end: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_txpow -+*/ -+static inline int -+acx_ioctl_get_txpow( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->power; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ vwrq->flags = IW_TXPOW_DBM; -+ vwrq->disabled = 0; -+ vwrq->fixed = 1; -+ vwrq->value = adev->tx_level_dbm; -+ -+ log(L_IOCTL, "get txpower:%d dBm\n", adev->tx_level_dbm); -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_txpow -+*/ -+static int -+acx_ioctl_set_txpow( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->power; -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ log(L_IOCTL, "set txpower:%d, disabled:%d, flags:0x%04X\n", -+ vwrq->value, vwrq->disabled, vwrq->flags); -+ -+ acx_sem_lock(adev); -+ -+ if (vwrq->disabled != adev->tx_disabled) { -+ SET_BIT(adev->set_mask, GETSET_TX); -+ } -+ -+ adev->tx_disabled = vwrq->disabled; -+ if (vwrq->value == -1) { -+ if (vwrq->disabled) { -+ adev->tx_level_dbm = 0; -+ log(L_IOCTL, "disable radio tx\n"); -+ } else { -+ /* adev->tx_level_auto = 1; */ -+ log(L_IOCTL, "set tx power auto (NIY)\n"); -+ } -+ } else { -+ adev->tx_level_dbm = vwrq->value <= 20 ? vwrq->value : 20; -+ /* adev->tx_level_auto = 0; */ -+ log(L_IOCTL, "set txpower=%d dBm\n", adev->tx_level_dbm); -+ } -+ SET_BIT(adev->set_mask, GETSET_TXPOWER); -+ -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_range -+*/ -+static int -+acx_ioctl_get_range( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->data; -+ struct iw_range *range = (struct iw_range *)extra; -+ acx_device_t *adev = ndev2adev(ndev); -+ int i,n; -+ -+ FN_ENTER; -+ -+ if (!dwrq->pointer) -+ goto end; -+ -+ dwrq->length = sizeof(struct iw_range); -+ memset(range, 0, sizeof(struct iw_range)); -+ n = 0; -+ for (i = 1; i <= 14; i++) { -+ if (adev->reg_dom_chanmask & (1 << (i - 1))) { -+ range->freq[n].i = i; -+ range->freq[n].m = acx_channel_freq[i - 1] * 100000; -+ range->freq[n].e = 1; /* units are MHz */ -+ n++; -+ } -+ } -+ range->num_channels = n; -+ range->num_frequency = n; -+ -+ range->min_rts = 0; -+ range->max_rts = 2312; -+ -+#if ACX_FRAGMENTATION -+ range->min_frag = 256; -+ range->max_frag = 2312; -+#endif -+ -+ range->encoding_size[0] = 5; -+ range->encoding_size[1] = 13; -+ range->encoding_size[2] = 29; -+ range->num_encoding_sizes = 3; -+ range->max_encoding_tokens = 4; -+ -+ range->min_pmp = 0; -+ range->max_pmp = 5000000; -+ range->min_pmt = 0; -+ range->max_pmt = 65535 * 1000; -+ range->pmp_flags = IW_POWER_PERIOD; -+ range->pmt_flags = IW_POWER_TIMEOUT; -+ range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R; -+ -+ if (IS_ACX100(adev)) { /* ACX100 has direct radio programming - arbitrary levels, so offer a lot */ -+ for (i = 0; i <= IW_MAX_TXPOWER - 1; i++) -+ range->txpower[i] = 20 * i / (IW_MAX_TXPOWER - 1); -+ range->num_txpower = IW_MAX_TXPOWER; -+ range->txpower_capa = IW_TXPOW_DBM; -+ } -+ else { -+ int count = min(IW_MAX_TXPOWER, (int)adev->cfgopt_power_levels.len); -+ for (i = 0; i <= count; i++) -+ range->txpower[i] = adev->cfgopt_power_levels.list[i]; -+ range->num_txpower = count; -+ /* this list is given in mW */ -+ range->txpower_capa = IW_TXPOW_MWATT; -+ } -+ -+ range->we_version_compiled = WIRELESS_EXT; -+ range->we_version_source = 0x9; -+ -+ range->retry_capa = IW_RETRY_LIMIT; -+ range->retry_flags = IW_RETRY_LIMIT; -+ range->min_retry = 1; -+ range->max_retry = 255; -+ -+ range->r_time_flags = IW_RETRY_LIFETIME; -+ range->min_r_time = 0; -+ /* FIXME: lifetime ranges and orders of magnitude are strange?? */ -+ range->max_r_time = 65535; -+ -+ if (IS_USB(adev)) -+ range->sensitivity = 0; -+ else if (IS_ACX111(adev)) -+ range->sensitivity = 3; -+ else -+ range->sensitivity = 255; -+ -+ for (i=0; i < adev->rate_supported_len; i++) { -+ range->bitrate[i] = (adev->rate_supported[i] & ~0x80) * 500000; -+ /* never happens, but keep it, to be safe: */ -+ if (range->bitrate[i] == 0) -+ break; -+ } -+ range->num_bitrates = i; -+ -+ range->max_qual.qual = 100; -+ range->max_qual.level = 100; -+ range->max_qual.noise = 100; -+ /* TODO: better values */ -+ range->avg_qual.qual = 90; -+ range->avg_qual.level = 80; -+ range->avg_qual.noise = 2; -+ -+end: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** Private functions -+*/ -+ -+/*********************************************************************** -+** acx_ioctl_get_nick -+*/ -+static inline int -+acx_ioctl_get_nick( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->data; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ strcpy(extra, adev->nick); -+ dwrq->length = strlen(extra) + 1; -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_nick -+*/ -+static int -+acx_ioctl_set_nick( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->data; -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ if (dwrq->length > IW_ESSID_MAX_SIZE + 1) { -+ result = -E2BIG; -+ goto end_unlock; -+ } -+ -+ /* extra includes trailing \0, so it's ok */ -+ strcpy(adev->nick, extra); -+ result = OK; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_retry -+*/ -+static int -+acx_ioctl_get_retry( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->retry; -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned int type = vwrq->flags & IW_RETRY_TYPE; -+ unsigned int modifier = vwrq->flags & IW_RETRY_MODIFIER; -+ int result; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* return the short retry number by default */ -+ if (type == IW_RETRY_LIFETIME) { -+ vwrq->flags = IW_RETRY_LIFETIME; -+ vwrq->value = adev->msdu_lifetime; -+ } else if (modifier == IW_RETRY_MAX) { -+ vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; -+ vwrq->value = adev->long_retry; -+ } else { -+ vwrq->flags = IW_RETRY_LIMIT; -+ if (adev->long_retry != adev->short_retry) -+ SET_BIT(vwrq->flags, IW_RETRY_MIN); -+ vwrq->value = adev->short_retry; -+ } -+ -+ /* can't be disabled */ -+ vwrq->disabled = (u8)0; -+ result = OK; -+ -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_retry -+*/ -+static int -+acx_ioctl_set_retry( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->retry; -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ if (!vwrq) { -+ result = -EFAULT; -+ goto end; -+ } -+ if (vwrq->disabled) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ acx_sem_lock(adev); -+ -+ result = -EINVAL; -+ if (IW_RETRY_LIMIT == (vwrq->flags & IW_RETRY_TYPE)) { -+ printk("old retry limits: short %d long %d\n", -+ adev->short_retry, adev->long_retry); -+ if (vwrq->flags & IW_RETRY_MAX) { -+ adev->long_retry = vwrq->value; -+ } else if (vwrq->flags & IW_RETRY_MIN) { -+ adev->short_retry = vwrq->value; -+ } else { -+ /* no modifier: set both */ -+ adev->long_retry = vwrq->value; -+ adev->short_retry = vwrq->value; -+ } -+ printk("new retry limits: short %d long %d\n", -+ adev->short_retry, adev->long_retry); -+ SET_BIT(adev->set_mask, GETSET_RETRY); -+ result = -EINPROGRESS; -+ } -+ else if (vwrq->flags & IW_RETRY_LIFETIME) { -+ adev->msdu_lifetime = vwrq->value; -+ printk("new MSDU lifetime: %d\n", adev->msdu_lifetime); -+ SET_BIT(adev->set_mask, SET_MSDU_LIFETIME); -+ result = -EINPROGRESS; -+ } -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/************************ private ioctls ******************************/ -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_debug -+*/ -+#if ACX_DEBUG -+static int -+acx_ioctl_set_debug( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ unsigned int debug_new = *((unsigned int *)extra); -+ int result = -EINVAL; -+ -+ log(L_ANY, "setting debug from %04X to %04X\n", acx_debug, debug_new); -+ acx_debug = debug_new; -+ -+ result = OK; -+ return result; -+ -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_ioctl_list_reg_domain -+*/ -+static int -+acx_ioctl_list_reg_domain( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ int i = 1; -+ const char * const *entry = acx_reg_domain_strings; -+ -+ printk("dom# chan# domain/country\n"); -+ while (*entry) -+ printk("%4d %s\n", i++, *entry++); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_reg_domain -+*/ -+static int -+acx_ioctl_set_reg_domain( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ if ((*extra < 1) || ((size_t)*extra > acx_reg_domain_ids_len)) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ acx_sem_lock(adev); -+ -+ adev->reg_dom_id = acx_reg_domain_ids[*extra - 1]; -+ SET_BIT(adev->set_mask, GETSET_REG_DOMAIN); -+ -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_reg_domain -+*/ -+static int -+acx_ioctl_get_reg_domain( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int dom,i; -+ -+ /* no locking */ -+ dom = adev->reg_dom_id; -+ -+ for (i = 1; i <= acx_reg_domain_ids_len; i++) { -+ if (acx_reg_domain_ids[i-1] == dom) { -+ log(L_IOCTL, "regulatory domain is currently set " -+ "to %d (0x%X): %s\n", i, dom, -+ acx_reg_domain_strings[i-1]); -+ *extra = i; -+ break; -+ } -+ } -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_short_preamble -+*/ -+static const char * const -+preamble_modes[] = { -+ "off", -+ "on", -+ "auto (peer capability dependent)", -+ "unknown mode, error" -+}; -+ -+static int -+acx_ioctl_set_short_preamble( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int i; -+ int result; -+ -+ FN_ENTER; -+ -+ if ((unsigned char)*extra > 2) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ acx_sem_lock(adev); -+ -+ adev->preamble_mode = (u8)*extra; -+ switch (adev->preamble_mode) { -+ case 0: /* long */ -+ adev->preamble_cur = 0; -+ break; -+ case 1: -+ /* short, kick incapable peers */ -+ adev->preamble_cur = 1; -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ client_t *clt = &adev->sta_list[i]; -+ if (!clt->used) continue; -+ if (!(clt->cap_info & WF_MGMT_CAP_SHORT)) { -+ clt->used = CLIENT_EMPTY_SLOT_0; -+ } -+ } -+ switch (adev->mode) { -+ case ACX_MODE_2_STA: -+ if (adev->ap_client && !adev->ap_client->used) { -+ /* We kicked our AP :) */ -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ } -+ } -+ break; -+ case 2: /* auto. short only if all peers are short-capable */ -+ adev->preamble_cur = 1; -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ client_t *clt = &adev->sta_list[i]; -+ if (!clt->used) continue; -+ if (!(clt->cap_info & WF_MGMT_CAP_SHORT)) { -+ adev->preamble_cur = 0; -+ break; -+ } -+ } -+ break; -+ } -+ printk("new short preamble setting: configured %s, active %s\n", -+ preamble_modes[adev->preamble_mode], -+ preamble_modes[adev->preamble_cur]); -+ result = OK; -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_short_preamble -+*/ -+static int -+acx_ioctl_get_short_preamble( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ acx_sem_lock(adev); -+ -+ printk("current short preamble setting: configured %s, active %s\n", -+ preamble_modes[adev->preamble_mode], -+ preamble_modes[adev->preamble_cur]); -+ -+ *extra = (char)adev->preamble_mode; -+ -+ acx_sem_unlock(adev); -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_antenna -+** -+** TX and RX antenna can be set separately but this function good -+** for testing 0-4 bits -+*/ -+static int -+acx_ioctl_set_antenna( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ acx_sem_lock(adev); -+ -+ printk("old antenna value: 0x%02X (COMBINED bit mask)\n" -+ "Rx antenna selection:\n" -+ "0x00 ant. 1\n" -+ "0x40 ant. 2\n" -+ "0x80 full diversity\n" -+ "0xc0 partial diversity\n" -+ "0x0f dwell time mask (in units of us)\n" -+ "Tx antenna selection:\n" -+ "0x00 ant. 2\n" /* yep, those ARE reversed! */ -+ "0x20 ant. 1\n" -+ "new antenna value: 0x%02X\n", -+ adev->antenna, (u8)*extra); -+ -+ adev->antenna = (u8)*extra; -+ SET_BIT(adev->set_mask, GETSET_ANTENNA); -+ -+ acx_sem_unlock(adev); -+ -+ return -EINPROGRESS; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_antenna -+*/ -+static int -+acx_ioctl_get_antenna( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ /* no locking. it's pointless to lock a single load */ -+ printk("current antenna value: 0x%02X (COMBINED bit mask)\n" -+ "Rx antenna selection:\n" -+ "0x00 ant. 1\n" -+ "0x40 ant. 2\n" -+ "0x80 full diversity\n" -+ "0xc0 partial diversity\n" -+ "Tx antenna selection:\n" -+ "0x00 ant. 2\n" /* yep, those ARE reversed! */ -+ "0x20 ant. 1\n", adev->antenna); -+ -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_rx_antenna -+** -+** 0 = antenna1; 1 = antenna2; 2 = full diversity; 3 = partial diversity -+** Could anybody test which antenna is the external one? -+*/ -+static int -+acx_ioctl_set_rx_antenna( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ if (*extra > 3) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ printk("old antenna value: 0x%02X\n", adev->antenna); -+ -+ acx_sem_lock(adev); -+ -+ adev->antenna &= 0x3f; -+ SET_BIT(adev->antenna, (*extra << 6)); -+ SET_BIT(adev->set_mask, GETSET_ANTENNA); -+ printk("new antenna value: 0x%02X\n", adev->antenna); -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_tx_antenna -+** -+** Arguments: 0 == antenna2; 1 == antenna1; -+** Could anybody test which antenna is the external one? -+*/ -+static int -+acx_ioctl_set_tx_antenna( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ if (*extra > 1) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ printk("old antenna value: 0x%02X\n", adev->antenna); -+ -+ acx_sem_lock(adev); -+ -+ adev->antenna &= ~0x30; -+ SET_BIT(adev->antenna, ((*extra & 0x01) << 5)); -+ SET_BIT(adev->set_mask, GETSET_ANTENNA); -+ printk("new antenna value: 0x%02X\n", adev->antenna); -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_wlansniff -+** -+** can we just remove this in favor of monitor mode? --vda -+*/ -+static int -+acx_ioctl_wlansniff( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned int *params = (unsigned int*)extra; -+ unsigned int enable = (unsigned int)(params[0] > 0); -+ int result; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* not using printk() here, since it distorts kismet display -+ * when printk messages activated */ -+ log(L_IOCTL, "setting monitor to: 0x%02X\n", params[0]); -+ -+ switch (params[0]) { -+ case 0: -+ /* no monitor mode. hmm, should we simply ignore it -+ * or go back to enabling adev->netdev->type ARPHRD_ETHER? */ -+ break; -+ case 1: -+ adev->monitor_type = ARPHRD_IEEE80211_PRISM; -+ break; -+ case 2: -+ adev->monitor_type = ARPHRD_IEEE80211; -+ break; -+ } -+ -+ if (params[0]) { -+ adev->mode = ACX_MODE_MONITOR; -+ SET_BIT(adev->set_mask, GETSET_MODE); -+ } -+ -+ if (enable) { -+ adev->channel = params[1]; -+ SET_BIT(adev->set_mask, GETSET_RX); -+ } -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_unknown11 -+** FIXME: looks like some sort of "iwpriv kick_sta MAC" but it's broken -+*/ -+static int -+acx_ioctl_unknown11( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+#ifdef BROKEN -+ struct iw_param *vwrq = &wrqu->param; -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ client_t client; -+ int result; -+ -+ acx_sem_lock(adev); -+ acx_lock(adev, flags); -+ -+ acx_l_transmit_disassoc(adev, &client); -+ result = OK; -+ -+ acx_unlock(adev, flags); -+ acx_sem_unlock(adev); -+ -+ return result; -+#endif -+ return -EINVAL; -+} -+ -+ -+/*********************************************************************** -+** debug helper function to be able to debug various issues relatively easily -+*/ -+static int -+acx_ioctl_dbg_set_masks( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ const unsigned int *params = (unsigned int*)extra; -+ int result; -+ -+ acx_sem_lock(adev); -+ -+ log(L_IOCTL, "setting flags in settings mask: " -+ "get_mask %08X set_mask %08X\n" -+ "before: get_mask %08X set_mask %08X\n", -+ params[0], params[1], -+ adev->get_mask, adev->set_mask); -+ SET_BIT(adev->get_mask, params[0]); -+ SET_BIT(adev->set_mask, params[1]); -+ log(L_IOCTL, "after: get_mask %08X set_mask %08X\n", -+ adev->get_mask, adev->set_mask); -+ result = -EINPROGRESS; /* immediately call commit handler */ -+ -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+* acx_ioctl_set_rates -+* -+* This ioctl takes string parameter. Examples: -+* iwpriv wlan0 SetRates "1,2" -+* use 1 and 2 Mbit rates, both are in basic rate set -+* iwpriv wlan0 SetRates "1,2 5,11" -+* use 1,2,5.5,11 Mbit rates. 1 and 2 are basic -+* iwpriv wlan0 SetRates "1,2 5c,11c" -+* same ('c' means 'CCK modulation' and it is a default for 5 and 11) -+* iwpriv wlan0 SetRates "1,2 5p,11p" -+* use 1,2,5.5,11 Mbit, 1,2 are basic. 5 and 11 are using PBCC -+* iwpriv wlan0 SetRates "1,2,5,11 22p" -+* use 1,2,5.5,11,22 Mbit. 1,2,5.5 and 11 are basic. 22 is using PBCC -+* (this is the maximum acx100 can do (modulo x4 mode)) -+* iwpriv wlan0 SetRates "1,2,5,11 22" -+* same. 802.11 defines only PBCC modulation -+* for 22 and 33 Mbit rates, so there is no ambiguity -+* iwpriv wlan0 SetRates "1,2,5,11 6o,9o,12o,18o,24o,36o,48o,54o" -+* 1,2,5.5 and 11 are basic. 11g OFDM rates are enabled but -+* they are not in basic rate set. 22 Mbit is disabled. -+* iwpriv wlan0 SetRates "1,2,5,11 6,9,12,18,24,36,48,54" -+* same. OFDM is default for 11g rates except 22 and 33 Mbit, -+* thus 'o' is optional -+* iwpriv wlan0 SetRates "1,2,5,11 6d,9d,12d,18d,24d,36d,48d,54d" -+* 1,2,5.5 and 11 are basic. 11g CCK-OFDM rates are enabled -+* (acx111 does not support CCK-OFDM, driver will reject this cmd) -+* iwpriv wlan0 SetRates "6,9,12 18,24,36,48,54" -+* 6,9,12 are basic, rest of 11g rates is enabled. Using OFDM -+*/ -+#include "setrate.c" -+ -+/* disallow: 33Mbit (unsupported by hw) */ -+/* disallow: CCKOFDM (unsupported by hw) */ -+static int -+acx111_supported(int mbit, int modulation, void *opaque) -+{ -+ if (mbit==33) return -ENOTSUPP; -+ if (modulation==DOT11_MOD_CCKOFDM) return -ENOTSUPP; -+ return OK; -+} -+ -+static const u16 -+acx111mask[] = { -+ [DOT11_RATE_1 ] = RATE111_1 , -+ [DOT11_RATE_2 ] = RATE111_2 , -+ [DOT11_RATE_5 ] = RATE111_5 , -+ [DOT11_RATE_11] = RATE111_11, -+ [DOT11_RATE_22] = RATE111_22, -+ /* [DOT11_RATE_33] = */ -+ [DOT11_RATE_6 ] = RATE111_6 , -+ [DOT11_RATE_9 ] = RATE111_9 , -+ [DOT11_RATE_12] = RATE111_12, -+ [DOT11_RATE_18] = RATE111_18, -+ [DOT11_RATE_24] = RATE111_24, -+ [DOT11_RATE_36] = RATE111_36, -+ [DOT11_RATE_48] = RATE111_48, -+ [DOT11_RATE_54] = RATE111_54, -+}; -+ -+static u32 -+acx111_gen_mask(int mbit, int modulation, void *opaque) -+{ -+ /* lower 16 bits show selected 1, 2, CCK and OFDM rates */ -+ /* upper 16 bits show selected PBCC rates */ -+ u32 m = acx111mask[rate_mbit2enum(mbit)]; -+ if (modulation==DOT11_MOD_PBCC) -+ return m<<16; -+ return m; -+} -+ -+static int -+verify_rate(u32 rate, int chip_type) -+{ -+ /* never happens. be paranoid */ -+ if (!rate) return -EINVAL; -+ -+ /* disallow: mixing PBCC and CCK at 5 and 11Mbit -+ ** (can be supported, but needs complicated handling in tx code) */ -+ if (( rate & ((RATE111_11+RATE111_5)<<16) ) -+ && ( rate & (RATE111_11+RATE111_5) ) -+ ) { -+ return -ENOTSUPP; -+ } -+ if (CHIPTYPE_ACX100 == chip_type) { -+ if ( rate & ~(RATE111_ACX100_COMPAT+(RATE111_ACX100_COMPAT<<16)) ) -+ return -ENOTSUPP; -+ } -+ return 0; -+} -+ -+static int -+acx_ioctl_set_rates(struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ int result; -+ u32 brate = 0, orate = 0; /* basic, operational rate set */ -+ -+ FN_ENTER; -+ -+ log(L_IOCTL, "set_rates %s\n", extra); -+ result = fill_ratemasks(extra, &brate, &orate, -+ acx111_supported, acx111_gen_mask, 0); -+ if (result) goto end; -+ SET_BIT(orate, brate); -+ log(L_IOCTL, "brate %08X orate %08X\n", brate, orate); -+ -+ result = verify_rate(brate, adev->chip_type); -+ if (result) goto end; -+ result = verify_rate(orate, adev->chip_type); -+ if (result) goto end; -+ -+ acx_sem_lock(adev); -+ acx_lock(adev, flags); -+ -+ adev->rate_basic = brate; -+ adev->rate_oper = orate; -+ /* TODO: ideally, we shall monitor highest basic rate -+ ** which was successfully sent to every peer -+ ** (say, last we checked, everybody could hear 5.5 Mbits) -+ ** and use that for bcasts when we want to reach all peers. -+ ** For beacons, we probably shall use lowest basic rate -+ ** because we want to reach all *potential* new peers too */ -+ adev->rate_bcast = 1 << lowest_bit(brate); -+ if (IS_ACX100(adev)) -+ adev->rate_bcast100 = acx_rate111to100(adev->rate_bcast); -+ adev->rate_auto = !has_only_one_bit(orate); -+ acx_l_update_client_rates(adev, orate); -+ /* TODO: get rid of ratevector, build it only when needed */ -+ acx_l_update_ratevector(adev); -+ -+ /* Do/don't do tx rate fallback; beacon contents and rate */ -+ SET_BIT(adev->set_mask, SET_RATE_FALLBACK|SET_TEMPLATES); -+ result = -EINPROGRESS; -+ -+ acx_unlock(adev, flags); -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_phy_chan_busy_percentage -+*/ -+static int -+acx_ioctl_get_phy_chan_busy_percentage( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ struct { -+ u16 type; -+ u16 len; -+ u32 busytime; -+ u32 totaltime; -+ } ACX_PACKED usage; -+ int result; -+ -+ acx_sem_lock(adev); -+ -+ if (OK != acx_s_interrogate(adev, &usage, ACX1xx_IE_MEDIUM_USAGE)) { -+ result = NOT_OK; -+ goto end_unlock; -+ } -+ -+ usage.busytime = le32_to_cpu(usage.busytime); -+ usage.totaltime = le32_to_cpu(usage.totaltime); -+ -+ /* yes, this is supposed to be "Medium" (singular of media), -+ not "average"! OK, reword the message to make it obvious... */ -+ printk("%s: busy percentage of medium (since last invocation): %d%% " -+ "(%u of %u microseconds)\n", -+ ndev->name, -+ usage.busytime / ((usage.totaltime / 100) + 1), -+ usage.busytime, usage.totaltime); -+ -+ result = OK; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_ed_threshold -+*/ -+static inline int -+acx_ioctl_set_ed_threshold( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ acx_sem_lock(adev); -+ -+ printk("old ED threshold value: %d\n", adev->ed_threshold); -+ adev->ed_threshold = (unsigned char)*extra; -+ printk("new ED threshold value: %d\n", (unsigned char)*extra); -+ SET_BIT(adev->set_mask, GETSET_ED_THRESH); -+ -+ acx_sem_unlock(adev); -+ -+ return -EINPROGRESS; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_cca -+*/ -+static inline int -+acx_ioctl_set_cca( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ acx_sem_lock(adev); -+ -+ printk("old CCA value: 0x%02X\n", adev->cca); -+ adev->cca = (unsigned char)*extra; -+ printk("new CCA value: 0x%02X\n", (unsigned char)*extra); -+ SET_BIT(adev->set_mask, GETSET_CCA); -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static const char * const -+scan_modes[] = { "active", "passive", "background" }; -+ -+static void -+acx_print_scan_params(acx_device_t *adev, const char* head) -+{ -+ printk("%s: %smode %d (%s), min chan time %dTU, " -+ "max chan time %dTU, max scan rate byte: %d\n", -+ adev->ndev->name, head, -+ adev->scan_mode, scan_modes[adev->scan_mode], -+ adev->scan_probe_delay, adev->scan_duration, adev->scan_rate); -+} -+ -+static int -+acx_ioctl_set_scan_params( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ const int *params = (int *)extra; -+ -+ acx_sem_lock(adev); -+ -+ acx_print_scan_params(adev, "old scan parameters: "); -+ if ((params[0] != -1) && (params[0] >= 0) && (params[0] <= 2)) -+ adev->scan_mode = params[0]; -+ if (params[1] != -1) -+ adev->scan_probe_delay = params[1]; -+ if (params[2] != -1) -+ adev->scan_duration = params[2]; -+ if ((params[3] != -1) && (params[3] <= 255)) -+ adev->scan_rate = params[3]; -+ acx_print_scan_params(adev, "new scan parameters: "); -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+static int -+acx_ioctl_get_scan_params( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ int *params = (int *)extra; -+ -+ acx_sem_lock(adev); -+ -+ acx_print_scan_params(adev, "current scan parameters: "); -+ params[0] = adev->scan_mode; -+ params[1] = adev->scan_probe_delay; -+ params[2] = adev->scan_duration; -+ params[3] = adev->scan_rate; -+ result = OK; -+ -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx100_ioctl_set_led_power( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ static const char * const led_modes[] = { "off", "on", "LinkQuality" }; -+ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ acx_sem_lock(adev); -+ -+ printk("%s: power LED status: old %d (%s), ", -+ ndev->name, -+ adev->led_power, -+ led_modes[adev->led_power]); -+ adev->led_power = extra[0]; -+ if (adev->led_power > 2) adev->led_power = 2; -+ printk("new %d (%s)\n", -+ adev->led_power, -+ led_modes[adev->led_power]); -+ -+ if (adev->led_power == 2) { -+ printk("%s: max link quality setting: old %d, ", -+ ndev->name, adev->brange_max_quality); -+ if (extra[1]) -+ adev->brange_max_quality = extra[1]; -+ printk("new %d\n", adev->brange_max_quality); -+ } -+ -+ SET_BIT(adev->set_mask, GETSET_LED_POWER); -+ -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static inline int -+acx100_ioctl_get_led_power( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ acx_sem_lock(adev); -+ -+ extra[0] = adev->led_power; -+ if (adev->led_power == 2) -+ extra[1] = adev->brange_max_quality; -+ else -+ extra[1] = -1; -+ -+ acx_sem_unlock(adev); -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx111_ioctl_info( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->param; -+ if (!IS_PCI(ndev2adev(ndev))) -+ return OK; -+ return acx111pci_ioctl_info(ndev, info, vwrq, extra); -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx100_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->param; -+ if (IS_USB(ndev2adev(ndev))) { -+ printk("acx: set_phy_amp_bias() is not supported on USB\n"); -+ return OK; -+ } -+#ifdef ACX_MEM -+ return acx100mem_ioctl_set_phy_amp_bias(ndev, info, vwrq, extra); -+#else -+ return acx100pci_ioctl_set_phy_amp_bias(ndev, info, vwrq, extra); -+#endif -+} -+ -+ -+/*********************************************************************** -+*/ -+static const iw_handler acx_ioctl_handler[] = -+{ -+ acx_ioctl_commit, /* SIOCSIWCOMMIT */ -+ acx_ioctl_get_name, /* SIOCGIWNAME */ -+ NULL, /* SIOCSIWNWID */ -+ NULL, /* SIOCGIWNWID */ -+ acx_ioctl_set_freq, /* SIOCSIWFREQ */ -+ acx_ioctl_get_freq, /* SIOCGIWFREQ */ -+ acx_ioctl_set_mode, /* SIOCSIWMODE */ -+ acx_ioctl_get_mode, /* SIOCGIWMODE */ -+ acx_ioctl_set_sens, /* SIOCSIWSENS */ -+ acx_ioctl_get_sens, /* SIOCGIWSENS */ -+ NULL, /* SIOCSIWRANGE */ -+ acx_ioctl_get_range, /* SIOCGIWRANGE */ -+ NULL, /* SIOCSIWPRIV */ -+ NULL, /* SIOCGIWPRIV */ -+ NULL, /* SIOCSIWSTATS */ -+ NULL, /* SIOCGIWSTATS */ -+#if IW_HANDLER_VERSION > 4 -+ iw_handler_set_spy, /* SIOCSIWSPY */ -+ iw_handler_get_spy, /* SIOCGIWSPY */ -+ iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ -+ iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ -+#else /* IW_HANDLER_VERSION > 4 */ -+#ifdef WIRELESS_SPY -+ NULL /* acx_ioctl_set_spy FIXME */, /* SIOCSIWSPY */ -+ NULL /* acx_ioctl_get_spy */, /* SIOCGIWSPY */ -+#else /* WSPY */ -+ NULL, /* SIOCSIWSPY */ -+ NULL, /* SIOCGIWSPY */ -+#endif /* WSPY */ -+ NULL, /* [nothing] */ -+ NULL, /* [nothing] */ -+#endif /* IW_HANDLER_VERSION > 4 */ -+ acx_ioctl_set_ap, /* SIOCSIWAP */ -+ acx_ioctl_get_ap, /* SIOCGIWAP */ -+ NULL, /* [nothing] */ -+ acx_ioctl_get_aplist, /* SIOCGIWAPLIST */ -+ acx_ioctl_set_scan, /* SIOCSIWSCAN */ -+ acx_ioctl_get_scan, /* SIOCGIWSCAN */ -+ acx_ioctl_set_essid, /* SIOCSIWESSID */ -+ acx_ioctl_get_essid, /* SIOCGIWESSID */ -+ acx_ioctl_set_nick, /* SIOCSIWNICKN */ -+ acx_ioctl_get_nick, /* SIOCGIWNICKN */ -+ NULL, /* [nothing] */ -+ NULL, /* [nothing] */ -+ acx_ioctl_set_rate, /* SIOCSIWRATE */ -+ acx_ioctl_get_rate, /* SIOCGIWRATE */ -+ acx_ioctl_set_rts, /* SIOCSIWRTS */ -+ acx_ioctl_get_rts, /* SIOCGIWRTS */ -+#if ACX_FRAGMENTATION -+ acx_ioctl_set_frag, /* SIOCSIWFRAG */ -+ acx_ioctl_get_frag, /* SIOCGIWFRAG */ -+#else -+ NULL, /* SIOCSIWFRAG */ -+ NULL, /* SIOCGIWFRAG */ -+#endif -+ acx_ioctl_set_txpow, /* SIOCSIWTXPOW */ -+ acx_ioctl_get_txpow, /* SIOCGIWTXPOW */ -+ acx_ioctl_set_retry, /* SIOCSIWRETRY */ -+ acx_ioctl_get_retry, /* SIOCGIWRETRY */ -+ acx_ioctl_set_encode, /* SIOCSIWENCODE */ -+ acx_ioctl_get_encode, /* SIOCGIWENCODE */ -+ acx_ioctl_set_power, /* SIOCSIWPOWER */ -+ acx_ioctl_get_power, /* SIOCGIWPOWER */ -+}; -+ -+ -+/*********************************************************************** -+*/ -+ -+/* if you plan to reorder something, make sure to reorder all other places -+ * accordingly! */ -+/* SET/GET convention: SETs must have even position, GETs odd */ -+#define ACX100_IOCTL SIOCIWFIRSTPRIV -+enum { -+ ACX100_IOCTL_DEBUG = ACX100_IOCTL, -+ ACX100_IOCTL_GET__________UNUSED1, -+ ACX100_IOCTL_SET_PLED, -+ ACX100_IOCTL_GET_PLED, -+ ACX100_IOCTL_SET_RATES, -+ ACX100_IOCTL_LIST_DOM, -+ ACX100_IOCTL_SET_DOM, -+ ACX100_IOCTL_GET_DOM, -+ ACX100_IOCTL_SET_SCAN_PARAMS, -+ ACX100_IOCTL_GET_SCAN_PARAMS, -+ ACX100_IOCTL_SET_PREAMB, -+ ACX100_IOCTL_GET_PREAMB, -+ ACX100_IOCTL_SET_ANT, -+ ACX100_IOCTL_GET_ANT, -+ ACX100_IOCTL_RX_ANT, -+ ACX100_IOCTL_TX_ANT, -+ ACX100_IOCTL_SET_PHY_AMP_BIAS, -+ ACX100_IOCTL_GET_PHY_CHAN_BUSY, -+ ACX100_IOCTL_SET_ED, -+ ACX100_IOCTL_GET__________UNUSED3, -+ ACX100_IOCTL_SET_CCA, -+ ACX100_IOCTL_GET__________UNUSED4, -+ ACX100_IOCTL_MONITOR, -+ ACX100_IOCTL_TEST, -+ ACX100_IOCTL_DBG_SET_MASKS, -+ ACX111_IOCTL_INFO, -+ ACX100_IOCTL_DBG_SET_IO, -+ ACX100_IOCTL_DBG_GET_IO -+}; -+ -+ -+static const iw_handler acx_ioctl_private_handler[] = -+{ -+#if ACX_DEBUG -+[ACX100_IOCTL_DEBUG - ACX100_IOCTL] = acx_ioctl_set_debug, -+#endif -+[ACX100_IOCTL_SET_PLED - ACX100_IOCTL] = acx100_ioctl_set_led_power, -+[ACX100_IOCTL_GET_PLED - ACX100_IOCTL] = acx100_ioctl_get_led_power, -+[ACX100_IOCTL_SET_RATES - ACX100_IOCTL] = acx_ioctl_set_rates, -+[ACX100_IOCTL_LIST_DOM - ACX100_IOCTL] = acx_ioctl_list_reg_domain, -+[ACX100_IOCTL_SET_DOM - ACX100_IOCTL] = acx_ioctl_set_reg_domain, -+[ACX100_IOCTL_GET_DOM - ACX100_IOCTL] = acx_ioctl_get_reg_domain, -+[ACX100_IOCTL_SET_SCAN_PARAMS - ACX100_IOCTL] = acx_ioctl_set_scan_params, -+[ACX100_IOCTL_GET_SCAN_PARAMS - ACX100_IOCTL] = acx_ioctl_get_scan_params, -+[ACX100_IOCTL_SET_PREAMB - ACX100_IOCTL] = acx_ioctl_set_short_preamble, -+[ACX100_IOCTL_GET_PREAMB - ACX100_IOCTL] = acx_ioctl_get_short_preamble, -+[ACX100_IOCTL_SET_ANT - ACX100_IOCTL] = acx_ioctl_set_antenna, -+[ACX100_IOCTL_GET_ANT - ACX100_IOCTL] = acx_ioctl_get_antenna, -+[ACX100_IOCTL_RX_ANT - ACX100_IOCTL] = acx_ioctl_set_rx_antenna, -+[ACX100_IOCTL_TX_ANT - ACX100_IOCTL] = acx_ioctl_set_tx_antenna, -+[ACX100_IOCTL_SET_PHY_AMP_BIAS - ACX100_IOCTL] = acx100_ioctl_set_phy_amp_bias, -+[ACX100_IOCTL_GET_PHY_CHAN_BUSY - ACX100_IOCTL] = acx_ioctl_get_phy_chan_busy_percentage, -+[ACX100_IOCTL_SET_ED - ACX100_IOCTL] = acx_ioctl_set_ed_threshold, -+[ACX100_IOCTL_SET_CCA - ACX100_IOCTL] = acx_ioctl_set_cca, -+[ACX100_IOCTL_MONITOR - ACX100_IOCTL] = acx_ioctl_wlansniff, -+[ACX100_IOCTL_TEST - ACX100_IOCTL] = acx_ioctl_unknown11, -+[ACX100_IOCTL_DBG_SET_MASKS - ACX100_IOCTL] = acx_ioctl_dbg_set_masks, -+[ACX111_IOCTL_INFO - ACX100_IOCTL] = acx111_ioctl_info, -+}; -+ -+ -+static const struct iw_priv_args acx_ioctl_private_args[] = { -+#if ACX_DEBUG -+{ cmd : ACX100_IOCTL_DEBUG, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetDebug" }, -+#endif -+{ cmd : ACX100_IOCTL_SET_PLED, -+ set_args : IW_PRIV_TYPE_BYTE | 2, -+ get_args : 0, -+ name : "SetLEDPower" }, -+{ cmd : ACX100_IOCTL_GET_PLED, -+ set_args : 0, -+ get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2, -+ name : "GetLEDPower" }, -+{ cmd : ACX100_IOCTL_SET_RATES, -+ set_args : IW_PRIV_TYPE_CHAR | 256, -+ get_args : 0, -+ name : "SetRates" }, -+{ cmd : ACX100_IOCTL_LIST_DOM, -+ set_args : 0, -+ get_args : 0, -+ name : "ListRegDomain" }, -+{ cmd : ACX100_IOCTL_SET_DOM, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetRegDomain" }, -+{ cmd : ACX100_IOCTL_GET_DOM, -+ set_args : 0, -+ get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ name : "GetRegDomain" }, -+{ cmd : ACX100_IOCTL_SET_SCAN_PARAMS, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, -+ get_args : 0, -+ name : "SetScanParams" }, -+{ cmd : ACX100_IOCTL_GET_SCAN_PARAMS, -+ set_args : 0, -+ get_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, -+ name : "GetScanParams" }, -+{ cmd : ACX100_IOCTL_SET_PREAMB, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetSPreamble" }, -+{ cmd : ACX100_IOCTL_GET_PREAMB, -+ set_args : 0, -+ get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ name : "GetSPreamble" }, -+{ cmd : ACX100_IOCTL_SET_ANT, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetAntenna" }, -+{ cmd : ACX100_IOCTL_GET_ANT, -+ set_args : 0, -+ get_args : 0, -+ name : "GetAntenna" }, -+{ cmd : ACX100_IOCTL_RX_ANT, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetRxAnt" }, -+{ cmd : ACX100_IOCTL_TX_ANT, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetTxAnt" }, -+{ cmd : ACX100_IOCTL_SET_PHY_AMP_BIAS, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetPhyAmpBias"}, -+{ cmd : ACX100_IOCTL_GET_PHY_CHAN_BUSY, -+ set_args : 0, -+ get_args : 0, -+ name : "GetPhyChanBusy" }, -+{ cmd : ACX100_IOCTL_SET_ED, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetED" }, -+{ cmd : ACX100_IOCTL_SET_CCA, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetCCA" }, -+{ cmd : ACX100_IOCTL_MONITOR, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, -+ get_args : 0, -+ name : "monitor" }, -+{ cmd : ACX100_IOCTL_TEST, -+ set_args : 0, -+ get_args : 0, -+ name : "Test" }, -+{ cmd : ACX100_IOCTL_DBG_SET_MASKS, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, -+ get_args : 0, -+ name : "DbgSetMasks" }, -+{ cmd : ACX111_IOCTL_INFO, -+ set_args : 0, -+ get_args : 0, -+ name : "GetAcx111Info" }, -+{ cmd : ACX100_IOCTL_DBG_SET_IO, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, -+ get_args : 0, -+ name : "DbgSetIO" }, -+{ cmd : ACX100_IOCTL_DBG_GET_IO, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3, -+ get_args : 0, -+ name : "DbgGetIO" }, -+}; -+ -+ -+const struct iw_handler_def acx_ioctl_handler_def = -+{ -+ .num_standard = VEC_SIZE(acx_ioctl_handler), -+ .num_private = VEC_SIZE(acx_ioctl_private_handler), -+ .num_private_args = VEC_SIZE(acx_ioctl_private_args), -+ .standard = (iw_handler *) acx_ioctl_handler, -+ .private = (iw_handler *) acx_ioctl_private_handler, -+ .private_args = (struct iw_priv_args *) acx_ioctl_private_args, -+#if IW_HANDLER_VERSION > 5 -+ .get_wireless_stats = acx_e_get_wireless_stats -+#endif /* IW > 5 */ -+}; -Index: linux-2.6.22/drivers/net/wireless/acx/Kconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/Kconfig 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,113 @@ -+config ACX -+ tristate "TI acx100/acx111 802.11b/g wireless chipsets" -+ depends on NET_RADIO && EXPERIMENTAL -+ select FW_LOADER -+ ---help--- -+ A driver for 802.11b/g wireless cards based on -+ Texas Instruments acx100 and acx111 chipsets. -+ -+ This driver supports Host AP mode that allows -+ your computer to act as an IEEE 802.11 access point. -+ This driver is new and experimental. -+ -+ Texas Instruments did not take part in development of this driver -+ in any way, shape or form. -+ -+ The driver can be compiled as a module and will be named "acx". -+ -+config ACX_PCI -+ bool "TI acx100/acx111 802.11b/g PCI" -+ depends on ACX && PCI -+ ---help--- -+ Include PCI and CardBus support in acx. -+ -+ acx chipsets need their firmware loaded at startup. -+ You will need to provide a firmware image via hotplug. -+ -+ Firmware may be in a form of single image 40-100kb in size -+ (a 'combined' firmware) or two images - main image -+ (again 40-100kb) and radio image (~10kb or less). -+ -+ Firmware images are requested from hotplug using following names: -+ -+ tiacx100 - main firmware image for acx100 chipset -+ tiacx100rNN - radio acx100 firmware for radio type NN -+ tiacx100cNN - combined acx100 firmware for radio type NN -+ tiacx111 - main acx111 firmware -+ tiacx111rNN - radio acx111 firmware for radio type NN -+ tiacx111cNN - combined acx111 firmware for radio type NN -+ -+ Driver will attempt to load combined image first. -+ If no such image is found, it will try to load main image -+ and radio image instead. -+ -+ Firmware files are not covered by GPL and are not distributed -+ with this driver for legal reasons. -+ -+config ACX_USB -+ bool "TI acx100/acx111 802.11b/g USB" -+ depends on ACX && (USB=y || USB=ACX) -+ ---help--- -+ Include USB support in acx. -+ -+ There is only one currently known device in this category, -+ D-Link DWL-120+, but newer devices seem to be on the horizon. -+ -+ acx chipsets need their firmware loaded at startup. -+ You will need to provide a firmware image via hotplug. -+ -+ Firmware for USB device is requested from hotplug -+ by the 'tiacx100usb' name. -+ -+ Firmware files are not covered by GPL and are not distributed -+ with this driver for legal reasons. -+ -+config ACX_MEM -+ bool "TI acx100/acx111 802.11b/g memory mapped slave 16 interface" -+ depends on ACX -+ ---help--- -+ acx chipsets need their firmware loaded at startup. -+ You will need to provide a firmware image via hotplug. -+ -+ Firmware for USB device is requested from hotplug -+ by the 'tiacx100usb' name. -+ -+ Firmware files are not covered by GPL and are not distributed -+ with this driver for legal reasons. -+ -+config ACX_CS -+ bool "TI acx100/acx111 802.11b/g cardbus interface" -+ depends on ACX -+ ---help--- -+ acx chipsets need their firmware loaded at startup. -+ You will need to provide a firmware image via hotplug. -+ -+ This driver is based on memory mapped driver. -+ -+ Firmware files are not covered by GPL and are not distributed -+ with this driver for legal reasons. -+ -+config ACX_HX4700 -+ tristate "ACX support for the iPAQ hx4700 using ACX_MEM" -+ depends on HX4700_CORE && ACX_MEM -+ ---help--- -+ Include memory interface support in acx for the iPAQ hx4700. -+ -+config ACX_HTCUNIVERSAL -+ tristate "ACX support for the HTC Universal using ACX_MEM" -+ depends on HTCUNIVERSAL_CORE && HTC_ASIC3 && ACX_MEM -+ ---help--- -+ Include memory interface support in acx for the HTC Universal. -+ -+config ACX_HTCSABLE -+ tristate "ACX support for the HTC Sable (IPAQ hw6915) using ACX_MEM" -+ depends on MACH_HW6900 && HTC_ASIC3 && ACX_MEM -+ ---help--- -+ Include memory interface support in acx for the HTC Sable (IPAQ hw6915). -+ -+config ACX_RX3000 -+ tristate "ACX support for the iPAQ RX3000 using ACX_MEM" -+ depends on MACH_RX3715 && ACX_MEM && LEDS_ASIC3 -+ ---help--- -+ Include memory interface support in acx for the IPAQ RX3000. -+ -Index: linux-2.6.22/drivers/net/wireless/acx/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/Makefile 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,21 @@ -+#obj-m += acx.o -+ -+#acx-obj-y += pci.o -+#acx-obj-y += usb.o -+ -+#acx-objs := wlan.o conv.o ioctl.o common.o $(acx-obj-y) -+ -+# Use this if you have proper Kconfig integration: -+ -+obj-$(CONFIG_ACX) += acx.o -+obj-$(CONFIG_ACX_HX4700) += hx4700_acx.o -+obj-$(CONFIG_ACX_HTCUNIVERSAL) += htcuniversal_acx.o -+obj-$(CONFIG_ACX_HTCSABLE) += htcsable_acx.o -+obj-$(CONFIG_ACX_RX3000) += rx3000_acx.o -+# -+acx-obj-$(CONFIG_ACX_PCI) += pci.o -+acx-obj-$(CONFIG_ACX_USB) += usb.o -+acx-obj-$(CONFIG_ACX_MEM) += mem.o -+acx-obj-$(CONFIG_ACX_CS) += cs.o -+# -+acx-objs := wlan.o conv.o ioctl.o common.o $(acx-obj-y) -Index: linux-2.6.22/drivers/net/wireless/acx/mem.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/mem.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,5363 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+** -+** Slave memory interface support: -+** -+** Todd Blumer - SDG Systems -+** Bill Reese - HP -+** Eric McCorkle - Shadowsun -+*/ -+#define ACX_MEM 1 -+ -+/* -+ * non-zero makes it dump the ACX memory to the console then -+ * panic when you cat /proc/driver/acx_wlan0_diag -+ */ -+#define DUMP_MEM_DEFINED 1 -+ -+#define DUMP_MEM_DURING_DIAG 0 -+#define DUMP_IF_SLOW 0 -+ -+#define PATCH_AROUND_BAD_SPOTS 1 -+#define HX4700_FIRMWARE_CHECKSUM 0x0036862e -+#define HX4700_ALTERNATE_FIRMWARE_CHECKSUM 0x00368a75 -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+ -+/* Linux 2.6.18+ uses */ -+#ifndef UTS_RELEASE -+#include -+#endif -+ -+#include /* required for Lx 2.6.8 ?? */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx.h" -+#include "acx_hw.h" -+ -+/*********************************************************************** -+*/ -+ -+#define CARD_EEPROM_ID_SIZE 6 -+ -+#include -+ -+#define REG_ACX_VENDOR_ID 0x900 -+/* -+ * This is the vendor id on the HX4700, anyway -+ */ -+#define ACX_VENDOR_ID 0x8400104c -+ -+typedef enum { -+ ACX_SOFT_RESET = 0, -+ -+ ACX_SLV_REG_ADDR, -+ ACX_SLV_REG_DATA, -+ ACX_SLV_REG_ADATA, -+ -+ ACX_SLV_MEM_CP, -+ ACX_SLV_MEM_ADDR, -+ ACX_SLV_MEM_DATA, -+ ACX_SLV_MEM_CTL, -+} acxreg_t; -+ -+/*********************************************************************** -+*/ -+static void acxmem_i_tx_timeout(struct net_device *ndev); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id); -+#else -+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id, struct pt_regs *regs); -+#endif -+static void acxmem_i_set_multicast_list(struct net_device *ndev); -+ -+static int acxmem_e_open(struct net_device *ndev); -+static int acxmem_e_close(struct net_device *ndev); -+static void acxmem_s_up(struct net_device *ndev); -+static void acxmem_s_down(struct net_device *ndev); -+ -+static void dump_acxmem (acx_device_t *adev, u32 start, int length); -+static int acxmem_complete_hw_reset (acx_device_t *adev); -+static void acxmem_s_delete_dma_regions(acx_device_t *adev); -+ -+static struct platform_device *resume_pdev; -+ -+static int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+acxmem_e_suspend(struct platform_device *pdev, pm_message_t state); -+#else -+acxmem_e_suspend(struct device *pdev, u32 state); -+#endif -+static void -+fw_resumer(struct work_struct *notused); -+//fw_resumer( void *data ); -+ -+static int acx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) -+{ -+ struct net_device *ndev = ptr; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ /* -+ * Upper level ioctl() handlers send a NETDEV_CHANGEADDR if the MAC address changes. -+ */ -+ -+ if (NETDEV_CHANGEADDR == event) { -+ /* -+ * the upper layers put the new MAC address in ndev->dev_addr; we just copy -+ * it over and update the ACX with it. -+ */ -+ MAC_COPY(adev->dev_addr, adev->ndev->dev_addr); -+ adev->set_mask |= GETSET_STATION_ID; -+ acx_s_update_card_settings (adev); -+ } -+ -+ return 0; -+} -+ -+static struct notifier_block acx_netdev_notifier = { -+ .notifier_call = acx_netdev_event, -+}; -+ -+/*********************************************************************** -+** Register access -+*/ -+ -+/* Pick one */ -+/* #define INLINE_IO static */ -+#define INLINE_IO static inline -+ -+INLINE_IO u32 -+read_id_register (acx_device_t *adev) -+{ -+ writel (0x24, &adev->iobase[ACX_SLV_REG_ADDR]); -+ return readl (&adev->iobase[ACX_SLV_REG_DATA]); -+} -+ -+INLINE_IO u32 -+read_reg32(acx_device_t *adev, unsigned int offset) -+{ -+ u32 val; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ return readl(((u8*)adev->iobase) + addr); -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ val = readl( &adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return val; -+} -+ -+INLINE_IO u16 -+read_reg16(acx_device_t *adev, unsigned int offset) -+{ -+ u16 lo; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ return readw(((u8 *) adev->iobase) + addr); -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ lo = readw( (u16 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return lo; -+} -+ -+INLINE_IO u8 -+read_reg8(acx_device_t *adev, unsigned int offset) -+{ -+ u8 lo; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) -+ return readb(((u8 *)adev->iobase) + addr); -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ lo = readw( (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return (u8)lo; -+} -+ -+INLINE_IO void -+write_reg32(acx_device_t *adev, unsigned int offset, u32 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writel(val, ((u8*)adev->iobase) + addr); -+ return; -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writel( val, &adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+INLINE_IO void -+write_reg16(acx_device_t *adev, unsigned int offset, u16 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writew(val, ((u8 *)adev->iobase) + addr); -+ return; -+ } -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writew( val, (u16 *) &adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+INLINE_IO void -+write_reg8(acx_device_t *adev, unsigned int offset, u8 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writeb(val, ((u8 *) adev->iobase) + addr); -+ return; -+ } -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writeb( val, (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+/* Handle PCI posting properly: -+ * Make sure that writes reach the adapter in case they require to be executed -+ * *before* the next write, by reading a random (and safely accessible) register. -+ * This call has to be made if there is no read following (which would flush the data -+ * to the adapter), yet the written data has to reach the adapter immediately. */ -+INLINE_IO void -+write_flush(acx_device_t *adev) -+{ -+ /* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */ -+ /* faster version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should also be safe): */ -+ (void) readl(adev->iobase); -+} -+ -+INLINE_IO void -+set_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { -+ u32 tmp; -+ -+ tmp = read_reg32 (adev, offset); -+ tmp = tmp | bits; -+ write_reg32 (adev, offset, tmp); -+ write_flush (adev); -+} -+ -+INLINE_IO void -+clear_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { -+ u32 tmp; -+ -+ tmp = read_reg32 (adev, offset); -+ tmp = tmp & ~bits; -+ write_reg32 (adev, offset, tmp); -+ write_flush (adev); -+} -+ -+/* -+ * Copy from PXA memory to the ACX memory. This assumes both the PXA and ACX -+ * addresses are 32 bit aligned. Count is in bytes. -+ */ -+INLINE_IO void -+write_slavemem32 (acx_device_t *adev, u32 slave_address, u32 val) -+{ -+ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, val); -+} -+ -+INLINE_IO u32 -+read_slavemem32 (acx_device_t *adev, u32 slave_address) -+{ -+ u32 val; -+ -+ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); -+ udelay (10); -+ val = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ -+ return val; -+} -+ -+INLINE_IO void -+write_slavemem8 (acx_device_t *adev, u32 slave_address, u8 val) -+{ -+ u32 data; -+ u32 base; -+ int offset; -+ -+ /* -+ * Get the word containing the target address and the byte offset in that word. -+ */ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ data &= ~(0xff << offset); -+ data |= val << offset; -+ write_slavemem32 (adev, base, data); -+} -+ -+INLINE_IO u8 -+read_slavemem8 (acx_device_t *adev, u32 slave_address) -+{ -+ u8 val; -+ u32 base; -+ u32 data; -+ int offset; -+ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ -+ val = (data >> offset) & 0xff; -+ -+ return val; -+} -+ -+/* -+ * doesn't split across word boundaries -+ */ -+INLINE_IO void -+write_slavemem16 (acx_device_t *adev, u32 slave_address, u16 val) -+{ -+ u32 data; -+ u32 base; -+ int offset; -+ -+ /* -+ * Get the word containing the target address and the byte offset in that word. -+ */ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ data &= ~(0xffff << offset); -+ data |= val << offset; -+ write_slavemem32 (adev, base, data); -+} -+ -+/* -+ * doesn't split across word boundaries -+ */ -+INLINE_IO u16 -+read_slavemem16 (acx_device_t *adev, u32 slave_address) -+{ -+ u16 val; -+ u32 base; -+ u32 data; -+ int offset; -+ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ -+ val = (data >> offset) & 0xffff; -+ -+ return val; -+} -+ -+/* -+ * Copy from slave memory -+ * -+ * TODO - rewrite using address autoincrement, handle partial words -+ */ -+void -+copy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) { -+ u32 tmp = 0; -+ u8 *ptmp = (u8 *) &tmp; -+ -+ /* -+ * Right now I'm making the assumption that the destination is aligned, but -+ * I'd better check. -+ */ -+ if ((u32) destination & 3) { -+ printk ("acx copy_from_slavemem: warning! destination not word-aligned!\n"); -+ } -+ -+ while (count >= 4) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); -+ udelay (10); -+ *((u32 *) destination) = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ count -= 4; -+ source += 4; -+ destination += 4; -+ } -+ -+ /* -+ * If the word reads above didn't satisfy the count, read one more word -+ * and transfer a byte at a time until the request is satisfied. -+ */ -+ if (count) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); -+ udelay (10); -+ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ while (count--) { -+ *destination++ = *ptmp++; -+ } -+ } -+} -+ -+/* -+ * Copy to slave memory -+ * -+ * TODO - rewrite using autoincrement, handle partial words -+ */ -+void -+copy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) -+{ -+ u32 tmp = 0; -+ u8* ptmp = (u8 *) &tmp; -+ static u8 src[512]; /* make static to avoid huge stack objects */ -+ -+ /* -+ * For now, make sure the source is word-aligned by copying it to a word-aligned -+ * buffer. Someday rewrite to avoid the extra copy. -+ */ -+ if (count > sizeof (src)) { -+ printk ("acx copy_to_slavemem: Warning! buffer overflow!\n"); -+ count = sizeof (src); -+ } -+ memcpy (src, source, count); -+ source = src; -+ -+ while (count >= 4) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, *((u32 *) source)); -+ count -= 4; -+ source += 4; -+ destination += 4; -+ } -+ -+ /* -+ * If there are leftovers read the next word from the acx and merge in -+ * what they want to write. -+ */ -+ if (count) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ while (count--) { -+ *ptmp++ = *source++; -+ } -+ /* -+ * reset address in case we're currently in auto-increment mode -+ */ -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, tmp); -+ udelay (10); -+ } -+ -+} -+ -+/* -+ * Block copy to slave buffers using memory block chain mode. Copies to the ACX -+ * transmit buffer structure with minimal intervention on our part. -+ * Interrupts should be disabled when calling this. -+ */ -+void -+chaincopy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) -+{ -+ u32 val; -+ u32 *data = (u32 *) source; -+ static u8 aligned_source[WLAN_A4FR_MAXLEN_WEP_FCS]; -+ -+ /* -+ * Warn if the pointers don't look right. Destination must fit in [23:5] with -+ * zero elsewhere and source should be 32 bit aligned. -+ * This should never happen since we're in control of both, but I want to know about -+ * it if it does. -+ */ -+ if ((destination & 0x00ffffe0) != destination) { -+ printk ("acx chaincopy: destination block 0x%04x not aligned!\n", destination); -+ } -+ if (count > sizeof aligned_source) { -+ printk( KERN_ERR "chaincopy_to_slavemem overflow!\n" ); -+ count = sizeof aligned_source; -+ } -+ if ((u32) source & 3) { -+ memcpy (aligned_source, source, count); -+ data = (u32 *) aligned_source; -+ } -+ -+ /* -+ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment -+ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word -+ */ -+ val = 2 << 16 | 1 << 2; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); -+ -+ /* -+ * SLV_MEM_CP[23:5] = start of 1st block -+ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 -+ */ -+ val = destination & 0x00ffffe0; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); -+ -+ /* -+ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] -+ */ -+ val = (destination & 0x00ffffe0) + (1<<2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); -+ -+ /* -+ * Write the data to the slave data register, rounding up to the end -+ * of the word containing the last byte (hence the > 0) -+ */ -+ while (count > 0) { -+ writel (*data++, &adev->iobase[ACX_SLV_MEM_DATA]); -+ count -= 4; -+ } -+} -+ -+ -+/* -+ * Block copy from slave buffers using memory block chain mode. Copies from the ACX -+ * receive buffer structures with minimal intervention on our part. -+ * Interrupts should be disabled when calling this. -+ */ -+void -+chaincopy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) -+{ -+ u32 val; -+ u32 *data = (u32 *) destination; -+ static u8 aligned_destination[WLAN_A4FR_MAXLEN_WEP_FCS]; -+ int saved_count = count; -+ -+ /* -+ * Warn if the pointers don't look right. Destination must fit in [23:5] with -+ * zero elsewhere and source should be 32 bit aligned. -+ * Turns out the network stack sends unaligned things, so fix them before -+ * copying to the ACX. -+ */ -+ if ((source & 0x00ffffe0) != source) { -+ printk ("acx chaincopy: source block 0x%04x not aligned!\n", source); -+ dump_acxmem (adev, 0, 0x10000); -+ } -+ if ((u32) destination & 3) { -+ //printk ("acx chaincopy: data destination not word aligned!\n"); -+ data = (u32 *) aligned_destination; -+ if (count > sizeof aligned_destination) { -+ printk( KERN_ERR "chaincopy_from_slavemem overflow!\n" ); -+ count = sizeof aligned_destination; -+ } -+ } -+ -+ /* -+ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment -+ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word -+ */ -+ val = (2 << 16) | (1 << 2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); -+ -+ /* -+ * SLV_MEM_CP[23:5] = start of 1st block -+ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 -+ */ -+ val = source & 0x00ffffe0; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); -+ -+ /* -+ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] -+ */ -+ val = (source & 0x00ffffe0) + (1<<2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); -+ -+ /* -+ * Read the data from the slave data register, rounding up to the end -+ * of the word containing the last byte (hence the > 0) -+ */ -+ while (count > 0) { -+ *data++ = readl (&adev->iobase[ACX_SLV_MEM_DATA]); -+ count -= 4; -+ } -+ -+ /* -+ * If the destination wasn't aligned, we would have saved it in -+ * the aligned buffer, so copy it where it should go. -+ */ -+ if ((u32) destination & 3) { -+ memcpy (destination, aligned_destination, saved_count); -+ } -+} -+ -+char -+printable (char c) -+{ -+ return ((c >= 20) && (c < 127)) ? c : '.'; -+} -+ -+#if DUMP_MEM_DEFINED > 0 -+static void -+dump_acxmem (acx_device_t *adev, u32 start, int length) -+{ -+ int i; -+ u8 buf[16]; -+ -+ while (length > 0) { -+ printk ("%04x ", start); -+ copy_from_slavemem (adev, buf, start, 16); -+ for (i = 0; (i < 16) && (i < length); i++) { -+ printk ("%02x ", buf[i]); -+ } -+ for (i = 0; (i < 16) && (i < length); i++) { -+ printk ("%c", printable (buf[i])); -+ } -+ printk ("\n"); -+ start += 16; -+ length -= 16; -+ } -+} -+#endif -+ -+static void -+enable_acx_irq(acx_device_t *adev); -+static void -+disable_acx_irq(acx_device_t *adev); -+ -+/* -+ * Return an acx pointer to the next transmit data block. -+ */ -+u32 -+allocate_acx_txbuf_space (acx_device_t *adev, int count) { -+ u32 block, next, last_block; -+ int blocks_needed; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&adev->txbuf_lock, flags); -+ /* -+ * Take 4 off the memory block size to account for the reserved word at the start of -+ * the block. -+ */ -+ blocks_needed = count / (adev->memblocksize - 4); -+ if (count % (adev->memblocksize - 4)) -+ blocks_needed++; -+ -+ if (blocks_needed <= adev->acx_txbuf_blocks_free) { -+ /* -+ * Take blocks at the head of the free list. -+ */ -+ last_block = block = adev->acx_txbuf_free; -+ -+ /* -+ * Follow block pointers through the requested number of blocks both to -+ * find the new head of the free list and to set the flags for the blocks -+ * appropriately. -+ */ -+ while (blocks_needed--) { -+ /* -+ * Keep track of the last block of the allocation -+ */ -+ last_block = adev->acx_txbuf_free; -+ -+ /* -+ * Make sure the end control flag is not set. -+ */ -+ next = read_slavemem32 (adev, adev->acx_txbuf_free) & 0x7ffff; -+ write_slavemem32 (adev, adev->acx_txbuf_free, next); -+ -+ /* -+ * Update the new head of the free list -+ */ -+ adev->acx_txbuf_free = next << 5; -+ adev->acx_txbuf_blocks_free--; -+ -+ } -+ -+ /* -+ * Flag the last block both by clearing out the next pointer -+ * and marking the control field. -+ */ -+ write_slavemem32 (adev, last_block, 0x02000000); -+ -+ /* -+ * If we're out of buffers make sure the free list pointer is NULL -+ */ -+ if (!adev->acx_txbuf_blocks_free) { -+ adev->acx_txbuf_free = 0; -+ } -+ } -+ else { -+ block = 0; -+ } -+ spin_unlock_irqrestore (&adev->txbuf_lock, flags); -+ return block; -+} -+ -+/* -+ * Return buffer space back to the pool by following the next pointers until we find -+ * the block marked as the end. Point the last block to the head of the free list, -+ * then update the head of the free list to point to the newly freed memory. -+ * This routine gets called in interrupt context, so it shouldn't block to protect -+ * the integrity of the linked list. The ISR already holds the lock. -+ */ -+void -+reclaim_acx_txbuf_space (acx_device_t *adev, u32 blockptr) { -+ u32 cur, last, next; -+ unsigned long flags; -+ -+ spin_lock_irqsave (&adev->txbuf_lock, flags); -+ if ((blockptr >= adev->acx_txbuf_start) && -+ (blockptr <= adev->acx_txbuf_start + -+ (adev->acx_txbuf_numblocks - 1) * adev->memblocksize)) { -+ cur = blockptr; -+ do { -+ last = cur; -+ next = read_slavemem32 (adev, cur); -+ -+ /* -+ * Advance to the next block in this allocation -+ */ -+ cur = (next & 0x7ffff) << 5; -+ -+ /* -+ * This block now counts as free. -+ */ -+ adev->acx_txbuf_blocks_free++; -+ } while (!(next & 0x02000000)); -+ -+ /* -+ * last now points to the last block of that allocation. Update the pointer -+ * in that block to point to the free list and reset the free list to the -+ * first block of the free call. If there were no free blocks, make sure -+ * the new end of the list marks itself as truly the end. -+ */ -+ if (adev->acx_txbuf_free) { -+ write_slavemem32 (adev, last, adev->acx_txbuf_free >> 5); -+ } -+ else { -+ write_slavemem32 (adev, last, 0x02000000); -+ } -+ adev->acx_txbuf_free = blockptr; -+ } -+ spin_unlock_irqrestore(&adev->txbuf_lock, flags); -+} -+ -+/* -+ * Initialize the pieces managing the transmit buffer pool on the ACX. The transmit -+ * buffer is a circular queue with one 32 bit word reserved at the beginning of each -+ * block. The upper 13 bits are a control field, of which only 0x02000000 has any -+ * meaning. The lower 19 bits are the address of the next block divided by 32. -+ */ -+void -+init_acx_txbuf (acx_device_t *adev) { -+ -+ /* -+ * acx100_s_init_memory_pools set up txbuf_start and txbuf_numblocks for us. -+ * All we need to do is reset the rest of the bookeeping. -+ */ -+ -+ adev->acx_txbuf_free = adev->acx_txbuf_start; -+ adev->acx_txbuf_blocks_free = adev->acx_txbuf_numblocks; -+ -+ /* -+ * Initialization leaves the last transmit pool block without a pointer back to -+ * the head of the list, but marked as the end of the list. That's how we want -+ * to see it, too, so leave it alone. This is only ever called after a firmware -+ * reset, so the ACX memory is in the state we want. -+ */ -+ -+} -+ -+INLINE_IO int -+adev_present(acx_device_t *adev) -+{ -+ /* fast version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should be safe): */ -+ return readl(adev->iobase) != 0xffffffff; -+} -+ -+/*********************************************************************** -+*/ -+static inline txdesc_t* -+get_txdesc(acx_device_t *adev, int index) -+{ -+ return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size); -+} -+ -+static inline txdesc_t* -+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc) -+{ -+ return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size); -+} -+ -+static txhostdesc_t* -+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return &adev->txhostdesc_start[index*2]; -+} -+ -+static inline client_t* -+get_txc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return adev->txc[index]; -+} -+ -+static inline u16 -+get_txr(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ index /= adev->txdesc_size; -+ return adev->txr[index]; -+} -+ -+static inline void -+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ adev->txc[index] = c; -+ adev->txr[index] = r111; -+} -+ -+ -+/*********************************************************************** -+** EEPROM and PHY read/write helpers -+*/ -+/*********************************************************************** -+** acxmem_read_eeprom_byte -+** -+** Function called to read an octet in the EEPROM. -+** -+** This function is used by acxmem_e_probe to check if the -+** connected card is a legal one or not. -+** -+** Arguments: -+** adev ptr to acx_device structure -+** addr address to read in the EEPROM -+** charbuf ptr to a char. This is where the read octet -+** will be stored -+*/ -+int -+acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf) -+{ -+ int result; -+ int count; -+ -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for EEPROM read\n", -+ adev->ndev->name); -+ result = NOT_OK; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ *charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA); -+ log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf); -+ result = OK; -+ -+fail: -+ return result; -+} -+ -+ -+/*********************************************************************** -+** We don't lock hw accesses here since we never r/w eeprom in IRQ -+** Note: this function sleeps only because of GFP_KERNEL alloc -+*/ -+#ifdef UNUSED -+int -+acxmem_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf) -+{ -+ u8 *data_verify = NULL; -+ unsigned long flags; -+ int count, i; -+ int result = NOT_OK; -+ u16 gpio_orig; -+ -+ printk("acx: WARNING! I would write to EEPROM now. " -+ "Since I really DON'T want to unless you know " -+ "what you're doing (THIS CODE WILL PROBABLY " -+ "NOT WORK YET!), I will abort that now. And " -+ "definitely make sure to make a " -+ "/proc/driver/acx_wlan0_eeprom backup copy first!!! " -+ "(the EEPROM content includes the PCI config header!! " -+ "If you kill important stuff, then you WILL " -+ "get in trouble and people DID get in trouble already)\n"); -+ return OK; -+ -+ FN_ENTER; -+ -+ data_verify = kmalloc(len, GFP_KERNEL); -+ if (!data_verify) { -+ goto end; -+ } -+ -+ /* first we need to enable the OE (EEPROM Output Enable) GPIO line -+ * to be able to write to the EEPROM. -+ * NOTE: an EEPROM writing success has been reported, -+ * but you probably have to modify GPIO_OUT, too, -+ * and you probably need to activate a different GPIO -+ * line instead! */ -+ gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE); -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1); -+ write_flush(adev); -+ -+ /* ok, now start writing the data out */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i)); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 1); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("WARNING, DANGER!!! " -+ "Timeout waiting for EEPROM write\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ } -+ -+ /* disable EEPROM writing */ -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig); -+ write_flush(adev); -+ -+ /* now start a verification run */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("timeout waiting for EEPROM read\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ -+ data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA); -+ } -+ -+ if (0 == memcmp(charbuf, data_verify, len)) -+ result = OK; /* read data matches, success */ -+ -+end: -+ kfree(data_verify); -+ FN_EXIT1(result); -+ return result; -+} -+#endif /* UNUSED */ -+ -+ -+/*********************************************************************** -+** acxmem_s_read_phy_reg -+** -+** Messing with rx/tx disabling and enabling here -+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic -+*/ -+int -+acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) -+{ -+ int result = NOT_OK; -+ int count; -+ -+ FN_ENTER; -+ -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg32(adev, IO_ACX_PHY_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for phy read\n", -+ adev->ndev->name); -+ *charbuf = 0; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ log(L_DEBUG, "count was %u\n", count); -+ *charbuf = read_reg8(adev, IO_ACX_PHY_DATA); -+ -+ log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg); -+ result = OK; -+ goto fail; /* silence compiler warning */ -+fail: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) -+{ -+ int count; -+ FN_ENTER; -+ -+ /* mprusko said that 32bit accesses result in distorted sensitivity -+ * on his card. Unconfirmed, looks like it's not true (most likely since we -+ * now properly flush writes). */ -+ write_reg32(adev, IO_ACX_PHY_DATA, value); -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 1); -+ write_flush(adev); -+ -+ count = 0xffff; -+ while (read_reg32(adev, IO_ACX_PHY_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for phy read\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg); -+ fail: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+#define NO_AUTO_INCREMENT 1 -+ -+/*********************************************************************** -+** acxmem_s_write_fw -+** -+** Write the firmware image into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** 1 firmware image corrupted -+** 0 success -+*/ -+static int -+acxmem_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset) -+{ -+ int len, size, checkMismatch = -1; -+ u32 sum, v32, tmp, id; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+ write_flush(adev); -+#endif -+#endif -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ sum += p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ len += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+ write_flush(adev); -+#endif -+ write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32); -+ write_flush(adev); -+#endif -+ write_slavemem32 (adev, offset + len - 4, v32); -+ -+ id = read_id_register (adev); -+ -+ /* -+ * check the data written -+ */ -+ tmp = read_slavemem32 (adev, offset + len - 4); -+ if (checkMismatch && (tmp != v32)) { -+ printk ("first data mismatch at 0x%08x good 0x%08x bad 0x%08x id 0x%08x\n", -+ offset + len - 4, v32, tmp, id); -+ checkMismatch = 0; -+ } -+ } -+ log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n", -+ size, sum, le32_to_cpu(fw_image->chksum)); -+ -+ /* compare our checksum with the stored image checksum */ -+ return (sum != le32_to_cpu(fw_image->chksum)); -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_validate_fw -+** -+** Compare the firmware image given with -+** the firmware image written into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** NOT_OK firmware image corrupted or not correctly written -+** OK success -+*/ -+static int -+acxmem_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image, -+ u32 offset) -+{ -+ u32 sum, v32, w32; -+ int len, size; -+ int result = OK; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+#endif -+ -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ p += 4; -+ len += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+#endif -+ udelay(10); -+ w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA); -+#endif -+ w32 = read_slavemem32 (adev, offset + len - 4); -+ -+ if (unlikely(w32 != v32)) { -+ printk("acx: FATAL: firmware upload: " -+ "data parts at offset %d don't match\n(0x%08X vs. 0x%08X)!\n" -+ "I/O timing issues or defective memory, with DWL-xx0+? " -+ "ACX_IO_WIDTH=16 may help. Please report\n", -+ len, v32, w32); -+ result = NOT_OK; -+ break; -+ } -+ -+ sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24); -+ } -+ -+ /* sum control verification */ -+ if (result != NOT_OK) { -+ if (sum != le32_to_cpu(fw_image->chksum)) { -+ printk("acx: FATAL: firmware upload: " -+ "checksums don't match!\n"); -+ result = NOT_OK; -+ } -+ } -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_upload_fw -+** -+** Called from acx_reset_dev -+*/ -+static int -+acxmem_s_upload_fw(acx_device_t *adev) -+{ -+ firmware_image_t *fw_image = NULL; -+ int res = NOT_OK; -+ int try; -+ u32 file_size; -+ char *filename = "WLANGEN.BIN"; -+#ifdef PATCH_AROUND_BAD_SPOTS -+ u32 offset; -+ int i; -+ /* -+ * arm-linux-objdump -d patch.bin, or -+ * od -Ax -t x4 patch.bin after finding the bounds -+ * of the .text section with arm-linux-objdump -s patch.bin -+ */ -+ u32 patch[] = { -+ 0xe584c030, 0xe59fc008, -+ 0xe92d1000, 0xe59fc004, 0xe8bd8000, 0x0000080c, -+ 0x0000aa68, 0x605a2200, 0x2c0a689c, 0x2414d80a, -+ 0x2f00689f, 0x1c27d007, 0x06241e7c, 0x2f000e24, -+ 0xe000d1f6, 0x602e6018, 0x23036468, 0x480203db, -+ 0x60ca6003, 0xbdf0750a, 0xffff0808 -+ }; -+#endif -+ -+ FN_ENTER; -+ /* No combined image; tell common we need the radio firmware, too */ -+ adev->need_radio_fw = 1; -+ -+ fw_image = acx_s_read_fw(adev->dev, filename, &file_size); -+ if (!fw_image) { -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+ } -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxmem_s_write_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_write_fw (main): %d\n", res); -+ if (OK == res) { -+ res = acxmem_s_validate_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_validate_fw " -+ "(main): %d\n", res); -+ } -+ -+ if (OK == res) { -+ SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED); -+ break; -+ } -+ printk("acx: firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+#ifdef PATCH_AROUND_BAD_SPOTS -+ /* -+ * Only want to do this if the firmware is exactly what we expect for an -+ * iPaq 4700; otherwise, bad things would ensue. -+ */ -+ if ((HX4700_FIRMWARE_CHECKSUM == fw_image->chksum) || -+ (HX4700_ALTERNATE_FIRMWARE_CHECKSUM == fw_image->chksum)) { -+ /* -+ * Put the patch after the main firmware image. 0x950c contains -+ * the ACX's idea of the end of the firmware. Use that location to -+ * load ours (which depends on that location being 0xab58) then -+ * update that location to point to after ours. -+ */ -+ -+ offset = read_slavemem32 (adev, 0x950c); -+ -+ log (L_DEBUG, "acx: patching in at 0x%04x\n", offset); -+ -+ for (i = 0; i < sizeof(patch) / sizeof(patch[0]); i++) { -+ write_slavemem32 (adev, offset, patch[i]); -+ offset += sizeof(u32); -+ } -+ -+ /* -+ * Patch the instruction at 0x0804 to branch to our ARM patch at 0xab58 -+ */ -+ write_slavemem32 (adev, 0x0804, 0xea000000 + (0xab58-0x0804-8)/4); -+ -+ /* -+ * Patch the instructions at 0x1f40 to branch to our Thumb patch at 0xab74 -+ * -+ * 4a00 ldr r2, [pc, #0] -+ * 4710 bx r2 -+ * .data 0xab74+1 -+ */ -+ write_slavemem32 (adev, 0x1f40, 0x47104a00); -+ write_slavemem32 (adev, 0x1f44, 0x0000ab74+1); -+ -+ /* -+ * Bump the end of the firmware up to beyond our patch. -+ */ -+ write_slavemem32 (adev, 0x950c, offset); -+ -+ } -+#endif -+ -+ vfree(fw_image); -+ -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_upload_radio -+** -+** Uploads the appropriate radio module firmware into the card. -+*/ -+int -+acxmem_s_upload_radio(acx_device_t *adev) -+{ -+ acx_ie_memmap_t mm; -+ firmware_image_t *radio_image; -+ acx_cmd_radioinit_t radioinit; -+ int res = NOT_OK; -+ int try; -+ u32 offset; -+ u32 size; -+ char filename[sizeof("RADIONN.BIN")]; -+ -+ if (!adev->need_radio_fw) return OK; -+ -+ FN_ENTER; -+ -+ acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+ offset = le32_to_cpu(mm.CodeEnd); -+ -+ snprintf(filename, sizeof(filename), "RADIO%02x.BIN", -+ adev->radio_type); -+ radio_image = acx_s_read_fw(adev->dev, filename, &size); -+ if (!radio_image) { -+ printk("acx: can't load radio module '%s'\n", filename); -+ goto fail; -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxmem_s_write_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res); -+ if (OK == res) { -+ res = acxmem_s_validate_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res); -+ } -+ -+ if (OK == res) -+ break; -+ printk("acx: radio firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); -+ radioinit.offset = cpu_to_le32(offset); -+ -+ /* no endian conversion needed, remains in card CPU area: */ -+ radioinit.len = radio_image->size; -+ -+ vfree(radio_image); -+ -+ if (OK != res) -+ goto fail; -+ -+ /* will take a moment so let's have a big timeout */ -+ acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT, -+ &radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000)); -+ -+ res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+ -+fail: -+ FN_EXIT1(res); -+ return res; -+} -+ -+/*********************************************************************** -+** acxmem_l_reset_mac -+** -+** MAC will be reset -+** Call context: reset_dev -+*/ -+static void -+acxmem_l_reset_mac(acx_device_t *adev) -+{ -+ int count; -+ FN_ENTER; -+ -+ /* halt eCPU */ -+ set_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); -+ -+ /* now do soft reset of eCPU, set bit */ -+ set_regbits (adev, IO_ACX_SOFT_RESET, 0x1); -+ log(L_DEBUG, "%s: enable soft reset...\n", __func__); -+ -+ /* Windows driver sleeps here for a while with this sequence */ -+ for (count = 0; count < 200; count++) { -+ udelay (50); -+ } -+ -+ /* now clear bit again: deassert eCPU reset */ -+ log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__); -+ clear_regbits (adev, IO_ACX_SOFT_RESET, 0x1); -+ -+ /* now start a burst read from initial EEPROM */ -+ set_regbits (adev, IO_ACX_EE_START, 0x1); -+ -+ /* -+ * Windows driver sleeps here for a while with this sequence -+ */ -+ for (count = 0; count < 200; count++) { -+ udelay (50); -+ } -+ -+ /* Windows driver writes 0x10000 to register 0x808 here */ -+ -+ write_reg32 (adev, 0x808, 0x10000); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_verify_init -+*/ -+static int -+acxmem_s_verify_init(acx_device_t *adev) -+{ -+ int result = NOT_OK; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ timeout = jiffies + 2*HZ; -+ for (;;) { -+ u32 irqstat = read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if ((irqstat != 0xFFFFFFFF) && (irqstat & HOST_INT_FCS_THRESHOLD)) { -+ result = OK; -+ write_reg32(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD); -+ break; -+ } -+ if (time_after(jiffies, timeout)) -+ break; -+ /* Init may take up to ~0.5 sec total */ -+ acx_s_msleep(50); -+ } -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** A few low-level helpers -+** -+** Note: these functions are not protected by lock -+** and thus are never allowed to be called from IRQ. -+** Also they must not race with fw upload which uses same hw regs -+*/ -+ -+/*********************************************************************** -+** acxmem_write_cmd_type_status -+*/ -+ -+static inline void -+acxmem_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status) -+{ -+ write_slavemem32 (adev, (u32) adev->cmd_area, type | (status << 16)); -+ write_flush(adev); -+} -+ -+ -+/*********************************************************************** -+** acxmem_read_cmd_type_status -+*/ -+static u32 -+acxmem_read_cmd_type_status(acx_device_t *adev) -+{ -+ u32 cmd_type, cmd_status; -+ -+ cmd_type = read_slavemem32 (adev, (u32) adev->cmd_area); -+ -+ cmd_status = (cmd_type >> 16); -+ cmd_type = (u16)cmd_type; -+ -+ log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n", -+ cmd_type, cmd_status, -+ acx_cmd_status_str(cmd_status)); -+ -+ return cmd_status; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_reset_dev -+** -+** Arguments: -+** netdevice that contains the adev variable -+** Returns: -+** NOT_OK on fail -+** OK on success -+** Side effects: -+** device is hard reset -+** Call context: -+** acxmem_e_probe -+** Comment: -+** This resets the device using low level hardware calls -+** as well as uploads and verifies the firmware to the card -+*/ -+ -+static inline void -+init_mboxes(acx_device_t *adev) -+{ -+ u32 cmd_offs, info_offs; -+ -+ cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS); -+ info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS); -+ adev->cmd_area = (u8*) cmd_offs; -+ adev->info_area = (u8*) info_offs; -+ /* -+ log(L_DEBUG, "iobase2=%p\n" -+ */ -+ log( L_DEBUG, "cmd_mbox_offset=%X cmd_area=%p\n" -+ "info_mbox_offset=%X info_area=%p\n", -+ cmd_offs, adev->cmd_area, -+ info_offs, adev->info_area); -+} -+ -+ -+static inline void -+read_eeprom_area(acx_device_t *adev) -+{ -+#if ACX_DEBUG > 1 -+ int offs; -+ u8 tmp; -+ -+ for (offs = 0x8c; offs < 0xb9; offs++) -+ acxmem_read_eeprom_byte(adev, offs, &tmp); -+#endif -+} -+ -+static int -+acxmem_s_reset_dev(acx_device_t *adev) -+{ -+ const char* msg = ""; -+ unsigned long flags; -+ int result = NOT_OK; -+ u16 hardware_info; -+ u16 ecpu_ctrl; -+ int count; -+ u32 tmp; -+ -+ FN_ENTER; -+ /* -+ write_reg32 (adev, IO_ACX_SLV_MEM_CP, 0); -+ */ -+ /* reset the device to make sure the eCPU is stopped -+ * to upload the firmware correctly */ -+ -+ acx_lock(adev, flags); -+ -+ /* Windows driver does some funny things here */ -+ /* -+ * clear bit 0x200 in register 0x2A0 -+ */ -+ clear_regbits (adev, 0x2A0, 0x200); -+ -+ /* -+ * Set bit 0x200 in ACX_GPIO_OUT -+ */ -+ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); -+ -+ /* -+ * read register 0x900 until its value is 0x8400104C, sleeping -+ * in between reads if it's not immediate -+ */ -+ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); -+ count = 500; -+ while (count-- && (tmp != ACX_VENDOR_ID)) { -+ mdelay (10); -+ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); -+ } -+ -+ /* end what Windows driver does */ -+ -+ acxmem_l_reset_mac(adev); -+ -+ ecpu_ctrl = read_reg32(adev, IO_ACX_ECPU_CTRL) & 1; -+ if (!ecpu_ctrl) { -+ msg = "eCPU is already running. "; -+ goto end_unlock; -+ } -+ -+#ifdef WE_DONT_NEED_THAT_DO_WE -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) { -+ /* eCPU most likely means "embedded CPU" */ -+ msg = "eCPU did not start after boot from flash. "; -+ goto end_unlock; -+ } -+ -+ /* check sense on reset flags */ -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) { -+ printk("%s: eCPU did not start after boot (SOR), " -+ "is this fatal?\n", adev->ndev->name); -+ } -+#endif -+ /* scan, if any, is stopped now, setting corresponding IRQ bit */ -+ adev->irq_status |= HOST_INT_SCAN_COMPLETE; -+ -+ acx_unlock(adev, flags); -+ -+ /* need to know radio type before fw load */ -+ /* Need to wait for arrival of this information in a loop, -+ * most probably since eCPU runs some init code from EEPROM -+ * (started burst read in reset_mac()) which also -+ * sets the radio type ID */ -+ -+ count = 0xffff; -+ do { -+ hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION); -+ if (!--count) { -+ msg = "eCPU didn't indicate radio type"; -+ goto end_fail; -+ } -+ cpu_relax(); -+ } while (!(hardware_info & 0xff00)); /* radio type still zero? */ -+ printk("ACX radio type 0x%02x\n", (hardware_info >> 8) & 0xff); -+ /* printk("DEBUG: count %d\n", count); */ -+ adev->form_factor = hardware_info & 0xff; -+ adev->radio_type = hardware_info >> 8; -+ -+ /* load the firmware */ -+ if (OK != acxmem_s_upload_fw(adev)) -+ goto end_fail; -+ -+ /* acx_s_msleep(10); this one really shouldn't be required */ -+ -+ /* now start eCPU by clearing bit */ -+ clear_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); -+ log(L_DEBUG, "booted eCPU up and waiting for completion...\n"); -+ -+ /* Windows driver clears bit 0x200 in register 0x2A0 here */ -+ clear_regbits (adev, 0x2A0, 0x200); -+ -+ /* Windows driver sets bit 0x200 in ACX_GPIO_OUT here */ -+ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); -+ /* wait for eCPU bootup */ -+ if (OK != acxmem_s_verify_init(adev)) { -+ msg = "timeout waiting for eCPU. "; -+ goto end_fail; -+ } -+ log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n"); -+ init_mboxes(adev); -+ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); -+ -+ /* test that EEPROM is readable */ -+ read_eeprom_area(adev); -+ -+ result = OK; -+ goto end; -+ -+/* Finish error message. Indicate which function failed */ -+end_unlock: -+ acx_unlock(adev, flags); -+end_fail: -+ printk("acx: %sreset_dev() FAILED\n", msg); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_issue_cmd_timeo -+** -+** Sends command to fw, extract result -+** -+** NB: we do _not_ take lock inside, so be sure to not touch anything -+** which may interfere with IRQ handler operation -+** -+** TODO: busy wait is a bit silly, so: -+** 1) stop doing many iters - go to sleep after first -+** 2) go to waitqueue based approach: wait, not poll! -+*/ -+#undef FUNC -+#define FUNC "issue_cmd" -+ -+#if !ACX_DEBUG -+int -+acxmem_s_issue_cmd_timeo( -+ acx_device_t *adev, -+ unsigned int cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout) -+{ -+#else -+int -+acxmem_s_issue_cmd_timeo_debug( -+ acx_device_t *adev, -+ unsigned cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout, -+ const char* cmdstr) -+{ -+ unsigned long start = jiffies; -+#endif -+ const char *devname; -+ unsigned counter; -+ u16 irqtype; -+ int i, j; -+ u8 *p; -+ u16 cmd_status; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ devname = adev->ndev->name; -+ if (!devname || !devname[0] || devname[4]=='%') -+ devname = "acx"; -+ -+ log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n", -+ cmdstr, buflen, cmd_timeout, -+ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); -+ -+ if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) { -+ printk("%s: "FUNC"(): firmware is not loaded yet, " -+ "cannot execute commands!\n", devname); -+ goto bad; -+ } -+ -+ if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) { -+ printk("input buffer (len=%u):\n", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ -+ /* wait for firmware to become idle for our command submission */ -+ timeout = HZ/5; -+ counter = (timeout * 1000 / HZ) - 1; /* in ms */ -+ timeout += jiffies; -+ do { -+ cmd_status = acxmem_read_cmd_type_status(adev); -+ /* Test for IDLE state */ -+ if (!cmd_status) -+ break; -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ if (!counter) { -+ /* the card doesn't get idle, we're in trouble */ -+ printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n", -+ devname, cmd_status); -+#if DUMP_IF_SLOW > 0 -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("not idle"); -+#endif -+ goto bad; -+ } else if (counter < 190) { /* if waited >10ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. " -+ "Please report\n", 199 - counter); -+ } -+ -+ /* now write the parameters of the command if needed */ -+ if (buffer && buflen) { -+ /* if it's an INTERROGATE command, just pass the length -+ * of parameters to read, as data */ -+#if CMD_DISCOVERY -+ if (cmd == ACX1xx_CMD_INTERROGATE) -+ memset_io(adev->cmd_area + 4, 0xAA, buflen); -+#endif -+ /* -+ * slave memory version -+ */ -+ copy_to_slavemem (adev, (u32) (adev->cmd_area + 4), buffer, -+ (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen); -+ } -+ /* now write the actual command type */ -+ acxmem_write_cmd_type_status(adev, cmd, 0); -+ -+ /* clear CMD_COMPLETE bit. can be set only by IRQ handler: */ -+ adev->irq_status &= ~HOST_INT_CMD_COMPLETE; -+ -+ /* execute command */ -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD); -+ write_flush(adev); -+ -+ /* wait for firmware to process command */ -+ -+ /* Ensure nonzero and not too large timeout. -+ ** Also converts e.g. 100->99, 200->199 -+ ** which is nice but not essential */ -+ cmd_timeout = (cmd_timeout-1) | 1; -+ if (unlikely(cmd_timeout > 1199)) -+ cmd_timeout = 1199; -+ -+ /* we schedule away sometimes (timeout can be large) */ -+ counter = cmd_timeout; -+ timeout = jiffies + cmd_timeout * HZ / 1000; -+ do { -+ if (!adev->irqs_active) { /* IRQ disabled: poll */ -+ irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ write_reg16(adev, IO_ACX_IRQ_ACK, -+ HOST_INT_CMD_COMPLETE); -+ break; -+ } -+ } else { /* Wait when IRQ will set the bit */ -+ irqtype = adev->irq_status; -+ if (irqtype & HOST_INT_CMD_COMPLETE) -+ break; -+ } -+ -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ /* save state for debugging */ -+ cmd_status = acxmem_read_cmd_type_status(adev); -+ -+ /* put the card in IDLE state */ -+ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); -+ -+ if (!counter) { /* timed out! */ -+ printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. " -+ "irq bits:0x%04X irq_status:0x%04X timeout:%dms " -+ "cmd_status:%d (%s)\n", -+ devname, (adev->irqs_active) ? "waiting" : "polling", -+ irqtype, adev->irq_status, cmd_timeout, -+ cmd_status, acx_cmd_status_str(cmd_status)); -+ printk("%s: "FUNC"(): device irq status 0x%04x\n", -+ devname, read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES)); -+ printk("%s: "FUNC"(): IO_ACX_IRQ_MASK 0x%04x IO_ACX_FEMR 0x%04x\n", -+ devname, -+ read_reg16 (adev, IO_ACX_IRQ_MASK), -+ read_reg16 (adev, IO_ACX_FEMR)); -+ if (read_reg16 (adev, IO_ACX_IRQ_MASK) == 0xffff) { -+ printk ("acxmem: firmware probably hosed - reloading\n"); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+ { -+ pm_message_t state; -+ acxmem_e_suspend (resume_pdev, state); -+ } -+#else -+ acxmem_e_suspend (adev->dev, 0); -+#endif -+ { -+ struct work_struct *notused; -+ fw_resumer (notused); -+ } -+ } -+ -+ goto bad; -+ } else if (cmd_timeout - counter > 30) { /* if waited >30ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. " -+ "count:%d. Please report\n", -+ (adev->irqs_active) ? "waited" : "polled", -+ cmd_timeout - counter, counter); -+ } -+ -+ if (1 != cmd_status) { /* it is not a 'Success' */ -+ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). " -+ "Took %dms of %d\n", -+ devname, cmd_status, acx_cmd_status_str(cmd_status), -+ cmd_timeout - counter, cmd_timeout); -+ /* zero out result buffer -+ * WARNING: this will trash stack in case of illegally large input -+ * length! */ -+ if (buflen > 388) { -+ /* -+ * 388 is maximum command length -+ */ -+ printk ("invalid length 0x%08x\n", buflen); -+ buflen = 388; -+ } -+ p = (u8 *) buffer; -+ for (i = 0; i < buflen; i+= 16) { -+ printk ("%04x:", i); -+ for (j = 0; (j < 16) && (i+j < buflen); j++) { -+ printk (" %02x", *p++); -+ } -+ printk ("\n"); -+ } -+ -+ if (buffer && buflen) -+ memset(buffer, 0, buflen); -+ goto bad; -+ } -+ -+ /* read in result parameters if needed */ -+ if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) { -+ copy_from_slavemem (adev, buffer, (u32) (adev->cmd_area + 4), buflen); -+ if (acx_debug & L_DEBUG) { -+ printk("output buffer (len=%u): ", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ } -+ -+/* ok: */ -+ log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n", -+ cmdstr, jiffies - start); -+ FN_EXIT1(OK); -+ return OK; -+ -+bad: -+ /* Give enough info so that callers can avoid -+ ** printing their own diagnostic messages */ -+#if ACX_DEBUG -+ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); -+#else -+ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); -+#endif -+ dump_stack(); -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+#if defined(NONESSENTIAL_FEATURES) -+typedef struct device_id { -+ unsigned char id[6]; -+ char *descr; -+ char *type; -+} device_id_t; -+ -+static const device_id_t -+device_ids[] = -+{ -+ { -+ {'G', 'l', 'o', 'b', 'a', 'l'}, -+ NULL, -+ NULL, -+ }, -+ { -+ {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, -+ "uninitialized", -+ "SpeedStream SS1021 or Gigafast WF721-AEX" -+ }, -+ { -+ {0x80, 0x81, 0x82, 0x83, 0x84, 0x85}, -+ "non-standard", -+ "DrayTek Vigor 520" -+ }, -+ { -+ {'?', '?', '?', '?', '?', '?'}, -+ "non-standard", -+ "Level One WPC-0200" -+ }, -+ { -+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, -+ "empty", -+ "DWL-650+ variant" -+ } -+}; -+ -+static void -+acx_show_card_eeprom_id(acx_device_t *adev) -+{ -+ unsigned char buffer[CARD_EEPROM_ID_SIZE]; -+ int i; -+ -+ memset(&buffer, 0, CARD_EEPROM_ID_SIZE); -+ /* use direct EEPROM access */ -+ for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) { -+ if (OK != acxmem_read_eeprom_byte(adev, -+ ACX100_EEPROM_ID_OFFSET + i, -+ &buffer[i])) { -+ printk("acx: reading EEPROM FAILED\n"); -+ break; -+ } -+ } -+ -+ for (i = 0; i < VEC_SIZE(device_ids); i++) { -+ if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) { -+ if (device_ids[i].descr) { -+ printk("acx: EEPROM card ID string check " -+ "found %s card ID: is this %s?\n", -+ device_ids[i].descr, device_ids[i].type); -+ } -+ break; -+ } -+ } -+ if (i == VEC_SIZE(device_ids)) { -+ printk("acx: EEPROM card ID string check found " -+ "unknown card: expected 'Global', got '%.*s\'. " -+ "Please report\n", CARD_EEPROM_ID_SIZE, buffer); -+ } -+} -+#endif /* NONESSENTIAL_FEATURES */ -+ -+/*********************************************************************** -+** acxmem_free_desc_queues -+** -+** Releases the queues that have been allocated, the -+** others have been initialised to NULL so this -+** function can be used if only part of the queues were allocated. -+*/ -+ -+void -+acxmem_free_desc_queues(acx_device_t *adev) -+{ -+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \ -+ if (ptr) { \ -+ kfree(ptr); \ -+ ptr = NULL; \ -+ size = 0; \ -+ } -+ -+ FN_ENTER; -+ -+ ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy); -+ -+ adev->txdesc_start = NULL; -+ -+ ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy); -+ -+ adev->rxdesc_start = NULL; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_delete_dma_regions -+*/ -+static void -+acxmem_s_delete_dma_regions(acx_device_t *adev) -+{ -+ unsigned long flags; -+ -+ FN_ENTER; -+ /* disable radio Tx/Rx. Shouldn't we use the firmware commands -+ * here instead? Or are we that much down the road that it's no -+ * longer possible here? */ -+ /* -+ * slave memory interface really doesn't like this. -+ */ -+ /* -+ write_reg16(adev, IO_ACX_ENABLE, 0); -+ */ -+ -+ acx_s_msleep(100); -+ -+ acx_lock(adev, flags); -+ acxmem_free_desc_queues(adev); -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_probe -+** -+** Probe routine called when a PCI device w/ matching ID is found. -+** Here's the sequence: -+** - Allocate the PCI resources. -+** - Read the PCMCIA attribute memory to make sure we have a WLAN card -+** - Reset the MAC -+** - Initialize the dev and wlan data -+** - Initialize the MAC -+** -+** pdev - ptr to pci device structure containing info about pci configuration -+** id - ptr to the device id entry that matched this device -+*/ -+static const u16 -+IO_ACX100[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_END_CTL */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x007c, /* IO_ACX_INT_TRIG */ -+ 0x0098, /* IO_ACX_IRQ_MASK */ -+ 0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00ac, /* IO_ACX_IRQ_ACK */ -+ 0x00b0, /* IO_ACX_HINT_TRIG */ -+ -+ 0x0104, /* IO_ACX_ENABLE */ -+ -+ 0x0250, /* IO_ACX_EEPROM_CTL */ -+ 0x0254, /* IO_ACX_EEPROM_ADDR */ -+ 0x0258, /* IO_ACX_EEPROM_DATA */ -+ 0x025c, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0268, /* IO_ACX_PHY_ADDR */ -+ 0x026c, /* IO_ACX_PHY_DATA */ -+ 0x0270, /* IO_ACX_PHY_CTL */ -+ -+ 0x0290, /* IO_ACX_GPIO_OE */ -+ -+ 0x0298, /* IO_ACX_GPIO_OUT */ -+ -+ 0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x02ac, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x02d0, /* IO_ACX_EE_START */ -+ 0x02d4, /* IO_ACX_SOR_CFG */ -+ 0x02d8 /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static const u16 -+IO_ACX111[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_MEM_CP */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x00b4, /* IO_ACX_INT_TRIG */ -+ 0x00d4, /* IO_ACX_IRQ_MASK */ -+ /* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */ -+ 0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00e8, /* IO_ACX_IRQ_ACK */ -+ 0x00ec, /* IO_ACX_HINT_TRIG */ -+ -+ 0x01d0, /* IO_ACX_ENABLE */ -+ -+ 0x0338, /* IO_ACX_EEPROM_CTL */ -+ 0x033c, /* IO_ACX_EEPROM_ADDR */ -+ 0x0340, /* IO_ACX_EEPROM_DATA */ -+ 0x0344, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0350, /* IO_ACX_PHY_ADDR */ -+ 0x0354, /* IO_ACX_PHY_DATA */ -+ 0x0358, /* IO_ACX_PHY_CTL */ -+ -+ 0x0374, /* IO_ACX_GPIO_OE */ -+ -+ 0x037c, /* IO_ACX_GPIO_OUT */ -+ -+ 0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x0390, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x0100, /* IO_ACX_EE_START */ -+ 0x0104, /* IO_ACX_SOR_CFG */ -+ 0x0108, /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static void -+dummy_netdev_init(struct net_device *ndev) {} -+ -+/* -+ * Most of the acx specific pieces of hardware reset. -+ */ -+static int -+acxmem_complete_hw_reset (acx_device_t *adev) -+{ -+ acx111_ie_configoption_t co; -+ -+ /* NB: read_reg() reads may return bogus data before reset_dev(), -+ * since the firmware which directly controls large parts of the I/O -+ * registers isn't initialized yet. -+ * acx100 seems to be more affected than acx111 */ -+ if (OK != acxmem_s_reset_dev (adev)) -+ return -1; -+ -+ if (IS_ACX100(adev)) { -+ /* ACX100: configopt struct in cmd mailbox - directly after reset */ -+ copy_from_slavemem (adev, (u8*) &co, (u32) adev->cmd_area, sizeof (co)); -+ } -+ -+ if (OK != acx_s_init_mac(adev)) -+ return -3; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111: configopt struct needs to be queried after full init */ -+ acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS); -+ } -+ -+ /* -+ * Set up transmit buffer administration -+ */ -+ init_acx_txbuf (adev); -+ -+ /* -+ * Windows driver writes 0x01000000 to register 0x288, RADIO_CTL, if the form factor -+ * is 3. It also write protects the EEPROM by writing 1<<9 to GPIO_OUT -+ */ -+ if (adev->form_factor == 3) { -+ set_regbits (adev, 0x288, 0x01000000); -+ set_regbits (adev, 0x298, 1<<9); -+ } -+ -+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */ -+ if (OK != acxmem_read_eeprom_byte(adev, 0x05, &adev->eeprom_version)) -+ return -2; -+ -+ acx_s_parse_configoption(adev, &co); -+ acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */ -+ acx_display_hardware_details(adev); -+ -+ return 0; -+} -+ -+static int __devinit -+acxmem_e_probe(struct platform_device *pdev) -+{ -+ struct acx_hardware_data *hwdata = pdev->dev.platform_data; -+ acx_device_t *adev = NULL; -+ struct net_device *ndev = NULL; -+ const char *chip_name; -+ int result = -EIO; -+ int err; -+ int i; -+ unsigned long addr_size=0; -+ u8 chip_type; -+ -+ FN_ENTER; -+ (void) hwdata->start_hw(); -+ -+ /* FIXME: prism54 calls pci_set_mwi() here, -+ * should we do/support the same? */ -+ -+ /* chiptype is u8 but id->driver_data is ulong -+ ** Works for now (possible values are 1 and 2) */ -+ chip_type = CHIPTYPE_ACX100; -+ /* acx100 and acx111 have different PCI memory regions */ -+ if (chip_type == CHIPTYPE_ACX100) { -+ chip_name = "ACX100"; -+ } else if (chip_type == CHIPTYPE_ACX111) { -+ chip_name = "ACX111"; -+ } else { -+ printk("acx: unknown chip type 0x%04X\n", chip_type); -+ goto fail_unknown_chiptype; -+ } -+ -+ printk("acx: found %s-based wireless network card\n", chip_name); -+ log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug); -+ -+ ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init); -+ /* (NB: memsets to 0 entire area) */ -+ if (!ndev) { -+ printk("acx: no memory for netdevice struct\n"); -+ goto fail_alloc_netdev; -+ } -+ -+ platform_set_drvdata (pdev, ndev); -+ -+ ether_setup(ndev); -+ -+ /* -+ * use platform_data resources that were provided -+ */ -+ ndev->irq = 0; -+ for (i=0; inum_resources; i++) { -+ if (pdev->resource[i].flags == IORESOURCE_IRQ) { -+ ndev->irq = pdev->resource[i].start; -+ } -+ else if (pdev->resource[i].flags == IORESOURCE_MEM) { -+ ndev->base_addr = pdev->resource[i].start; -+ addr_size = pdev->resource[i].end - pdev->resource[i].start; -+ } -+ } -+ if (addr_size == 0 || ndev->irq == 0) -+ goto fail_hw_params; -+ ndev->open = &acxmem_e_open; -+ ndev->stop = &acxmem_e_close; -+ pdev->dev.release = &acxmem_e_release; -+ ndev->hard_start_xmit = &acx_i_start_xmit; -+ ndev->get_stats = &acx_e_get_stats; -+#if IW_HANDLER_VERSION <= 5 -+ ndev->get_wireless_stats = &acx_e_get_wireless_stats; -+#endif -+ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -+ ndev->set_multicast_list = &acxmem_i_set_multicast_list; -+ ndev->tx_timeout = &acxmem_i_tx_timeout; -+ ndev->change_mtu = &acx_e_change_mtu; -+ ndev->watchdog_timeo = 4 * HZ; -+ -+ adev = ndev2adev(ndev); -+ spin_lock_init(&adev->lock); /* initial state: unlocked */ -+ spin_lock_init(&adev->txbuf_lock); -+ /* We do not start with downed sem: we want PARANOID_LOCKING to work */ -+ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ -+ /* since nobody can see new netdev yet, we can as well -+ ** just _presume_ that we're under sem (instead of actually taking it): */ -+ /* acx_sem_lock(adev); */ -+ adev->dev = &pdev->dev; -+ adev->ndev = ndev; -+ adev->dev_type = DEVTYPE_MEM; -+ adev->chip_type = chip_type; -+ adev->chip_name = chip_name; -+ adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111; -+ adev->membase = (volatile u32 *) ndev->base_addr; -+ adev->iobase = (volatile u32 *) ioremap_nocache (ndev->base_addr, addr_size); -+ /* to find crashes due to weird driver access -+ * to unconfigured interface (ifup) */ -+ adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead; -+ -+#if defined(NONESSENTIAL_FEATURES) -+ acx_show_card_eeprom_id(adev); -+#endif /* NONESSENTIAL_FEATURES */ -+ -+#ifdef SET_MODULE_OWNER -+ SET_MODULE_OWNER(ndev); -+#endif -+ SET_NETDEV_DEV(ndev, &pdev->dev); -+ -+ log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq); -+ -+ /* ok, pci setup is finished, now start initializing the card */ -+ -+ if (OK != acxmem_complete_hw_reset (adev)) -+ goto fail_reset; -+ -+ /* -+ * Set up default things for most of the card settings. -+ */ -+ acx_s_set_defaults(adev); -+ -+ /* Register the card, AFTER everything else has been set up, -+ * since otherwise an ioctl could step on our feet due to -+ * firmware operations happening in parallel or uninitialized data */ -+ err = register_netdev(ndev); -+ if (OK != err) { -+ printk("acx: register_netdev() FAILED: %d\n", err); -+ goto fail_register_netdev; -+ } -+ -+ acx_proc_register_entries(ndev); -+ -+ /* Now we have our device, so make sure the kernel doesn't try -+ * to send packets even though we're not associated to a network yet */ -+ acx_stop_queue(ndev, "on probe"); -+ acx_carrier_off(ndev, "on probe"); -+ -+ /* -+ * Set up a default monitor type so that poor combinations of initialization -+ * sequences in monitor mode don't end up destroying the hardware type. -+ */ -+ adev->monitor_type = ARPHRD_ETHER; -+ -+ /* -+ * Register to receive inetaddr notifier changes. This will allow us to -+ * catch if the user changes the MAC address of the interface. -+ */ -+ register_netdevice_notifier(&acx_netdev_notifier); -+ -+ /* after register_netdev() userspace may start working with dev -+ * (in particular, on other CPUs), we only need to up the sem */ -+ /* acx_sem_unlock(adev); */ -+ -+ printk("acx "ACX_RELEASE": net device %s, driver compiled " -+ "against wireless extensions %d and Linux %s\n", -+ ndev->name, WIRELESS_EXT, UTS_RELEASE); -+ -+#if CMD_DISCOVERY -+ great_inquisitor(adev); -+#endif -+ -+ result = OK; -+ goto done; -+ -+ /* error paths: undo everything in reverse order... */ -+ -+fail_register_netdev: -+ -+ acxmem_s_delete_dma_regions(adev); -+ -+fail_reset: -+fail_hw_params: -+ free_netdev(ndev); -+fail_alloc_netdev: -+fail_unknown_chiptype: -+ -+ -+done: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_remove -+** -+** Shut device down (if not hot unplugged) -+** and deallocate PCI resources for the acx chip. -+** -+** pdev - ptr to PCI device structure containing info about pci configuration -+*/ -+static int __devexit -+acxmem_e_remove(struct platform_device *pdev) -+{ -+ struct acx_hardware_data *hwdata = pdev->dev.platform_data; -+ struct net_device *ndev; -+ acx_device_t *adev; -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ ndev = (struct net_device*) platform_get_drvdata(pdev); -+ if (!ndev) { -+ log(L_DEBUG, "%s: card is unused. Skipping any release code\n", -+ __func__); -+ goto end; -+ } -+ -+ adev = ndev2adev(ndev); -+ -+ /* If device wasn't hot unplugged... */ -+ if (adev_present(adev)) { -+ -+ acx_sem_lock(adev); -+ -+ /* disable both Tx and Rx to shut radio down properly */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); -+ -+#ifdef REDUNDANT -+ /* put the eCPU to sleep to save power -+ * Halting is not possible currently, -+ * since not supported by all firmware versions */ -+ acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0); -+#endif -+ acx_lock(adev, flags); -+ -+ /* disable power LED to save power :-) */ -+ log(L_INIT, "switching off power LED to save power\n"); -+ acxmem_l_power_led(adev, 0); -+ -+ /* stop our eCPU */ -+ if (IS_ACX111(adev)) { -+ /* FIXME: does this actually keep halting the eCPU? -+ * I don't think so... -+ */ -+ acxmem_l_reset_mac(adev); -+ } else { -+ u16 temp; -+ -+ /* halt eCPU */ -+ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; -+ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); -+ write_flush(adev); -+ } -+ -+ acx_unlock(adev, flags); -+ -+ acx_sem_unlock(adev); -+ } -+ -+ -+ /* -+ * Unregister the notifier chain -+ */ -+ unregister_netdevice_notifier(&acx_netdev_notifier); -+ -+ /* unregister the device to not let the kernel -+ * (e.g. ioctls) access a half-deconfigured device -+ * NB: this will cause acxmem_e_close() to be called, -+ * thus we shouldn't call it under sem! */ -+ log(L_INIT, "removing device %s\n", ndev->name); -+ unregister_netdev(ndev); -+ -+ /* unregister_netdev ensures that no references to us left. -+ * For paranoid reasons we continue to follow the rules */ -+ acx_sem_lock(adev); -+ -+ if (adev->dev_state_mask & ACX_STATE_IFACE_UP) { -+ acxmem_s_down(ndev); -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ } -+ -+ acx_proc_unregister_entries(ndev); -+ -+ acxmem_s_delete_dma_regions(adev); -+ -+ /* finally, clean up PCI bus state */ -+ if (adev->iobase) iounmap((void *)adev->iobase); -+ -+ acx_sem_unlock(adev); -+ -+ /* Free netdev (quite late, -+ * since otherwise we might get caught off-guard -+ * by a netdev timeout handler execution -+ * expecting to see a working dev...) */ -+ free_netdev(ndev); -+ -+ (void) hwdata->stop_hw(); -+ -+ printk ("e_remove done\n"); -+end: -+ FN_EXIT0; -+ -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** TODO: PM code needs to be fixed / debugged / tested. -+*/ -+#ifdef CONFIG_PM -+static int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+acxmem_e_suspend(struct platform_device *pdev, pm_message_t state) -+#else -+acxmem_e_suspend(struct device *pdev, u32 state) -+#endif -+{ -+ struct net_device *ndev = platform_get_drvdata(pdev); -+ acx_device_t *adev; -+ struct acx_hardware_data *hwdata; -+ -+ FN_ENTER; -+ printk("acx: suspend handler is experimental!\n"); -+ printk("sus: dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ goto end; -+ -+ adev = ndev2adev(ndev); -+ printk("sus: adev %p\n", adev); -+ -+ hwdata = adev->dev->platform_data; -+ -+ acx_sem_lock(adev); -+ -+ netif_device_detach(ndev); /* this one cannot sleep */ -+ acxmem_s_down(ndev); -+ /* down() does not set it to 0xffff, but here we really want that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ acxmem_s_delete_dma_regions(adev); -+ -+ /* -+ * Turn the ACX chip off. -+ */ -+ hwdata->stop_hw(); -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+ -+static void -+fw_resumer(struct work_struct *notused) -+{ -+ struct platform_device *pdev = resume_pdev; -+ struct net_device *ndev = platform_get_drvdata(pdev); -+ acx_device_t *adev; -+ struct acx_hardware_data *hwdata; -+ -+ printk("acx: resume handler is experimental!\n"); -+ printk("rsm: got dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ return; -+ -+ adev = ndev2adev(ndev); -+ printk("rsm: got adev %p\n", adev); -+ -+ acx_sem_lock(adev); -+ -+ hwdata = adev->dev->platform_data; -+ -+ /* -+ * Turn on the ACX. -+ */ -+ hwdata->start_hw(); -+ -+ acxmem_complete_hw_reset (adev); -+ -+ /* -+ * done by acx_s_set_defaults for initial startup -+ */ -+ acxmem_set_interrupt_mask(adev); -+ -+ printk ("rsm: bringing up interface\n"); -+ SET_BIT (adev->set_mask, GETSET_ALL); -+ acxmem_s_up(ndev); -+ printk("rsm: acx up done\n"); -+ -+ /* now even reload all card parameters as they were before suspend, -+ * and possibly be back in the network again already :-) -+ */ -+ /* - most settings updated in acxmem_s_up() -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) { -+ adev->set_mask = GETSET_ALL; -+ acx_s_update_card_settings(adev); -+ printk("rsm: settings updated\n"); -+ } -+ */ -+ netif_device_attach(ndev); -+ printk("rsm: device attached\n"); -+ -+ acx_sem_unlock(adev); -+} -+ -+DECLARE_WORK( fw_resume_work, fw_resumer ); -+ -+static int -+acxmem_e_resume(struct platform_device *pdev) -+{ -+ FN_ENTER; -+ -+ resume_pdev = pdev; -+ schedule_work( &fw_resume_work ); -+ -+ FN_EXIT0; -+ return OK; -+} -+#endif /* CONFIG_PM */ -+ -+ -+/*********************************************************************** -+** acxmem_s_up -+** -+** This function is called by acxmem_e_open (when ifconfig sets the device as up) -+** -+** Side effects: -+** - Enables on-card interrupt requests -+** - calls acx_s_start -+*/ -+ -+static void -+enable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask); -+ write_reg16(adev, IO_ACX_FEMR, 0x8000); -+ adev->irqs_active = 1; -+ FN_EXIT0; -+} -+ -+static void -+acxmem_s_up(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ enable_acx_irq(adev); -+ acx_unlock(adev, flags); -+ -+ /* acx fw < 1.9.3.e has a hardware timer, and older drivers -+ ** used to use it. But we don't do that anymore, our OS -+ ** has reliable software timers */ -+ init_timer(&adev->mgmt_timer); -+ adev->mgmt_timer.function = acx_i_timer; -+ adev->mgmt_timer.data = (unsigned long)adev; -+ -+ /* Need to set ACX_STATE_IFACE_UP first, or else -+ ** timer won't be started by acx_set_status() */ -+ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ /* actual scan cmd will happen in start() */ -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); break; -+ case ACX_MODE_3_AP: -+ case ACX_MODE_MONITOR: -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break; -+ } -+ -+ acx_s_start(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_down -+** -+** This disables the netdevice -+** -+** Side effects: -+** - disables on-card interrupt request -+*/ -+ -+static void -+disable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ -+ /* I guess mask is not 0xffff because acx100 won't signal -+ ** cmd completion then (needed for ifup). -+ ** Someone with acx100 please confirm */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ adev->irqs_active = 0; -+ FN_EXIT0; -+} -+ -+static void -+acxmem_s_down(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ /* Disable IRQs first, so that IRQs cannot race with us */ -+ /* then wait until interrupts have finished executing on other CPUs */ -+ acx_lock(adev, flags); -+ disable_acx_irq(adev); -+ synchronize_irq(adev->pdev->irq); -+ acx_unlock(adev, flags); -+ -+ /* we really don't want to have an asynchronous tasklet disturb us -+ ** after something vital for its job has been shut down, so -+ ** end all remaining work now. -+ ** -+ ** NB: carrier_off (done by set_status below) would lead to -+ ** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK(). -+ ** That's why we do FLUSH first. -+ ** -+ ** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK() -+ ** waits for acx_e_after_interrupt_task to complete if it is running -+ ** on another CPU, but acx_e_after_interrupt_task -+ ** will sleep on sem forever, because it is taken by us! -+ ** Work around that by temporary sem unlock. -+ ** This will fail miserably if we'll be hit by concurrent -+ ** iwconfig or something in between. TODO! */ -+ acx_sem_unlock(adev); -+ FLUSH_SCHEDULED_WORK(); -+ acx_sem_lock(adev); -+ -+ /* This is possible: -+ ** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task -> -+ ** -> set_status(ASSOCIATED) -> wake_queue() -+ ** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK -+ ** lock/unlock is just paranoia, maybe not needed */ -+ acx_lock(adev, flags); -+ acx_stop_queue(ndev, "on ifdown"); -+ acx_set_status(adev, ACX_STATUS_0_STOPPED); -+ acx_unlock(adev, flags); -+ -+ /* kernel/timer.c says it's illegal to del_timer_sync() -+ ** a timer which restarts itself. We guarantee this cannot -+ ** ever happen because acx_i_timer() never does this if -+ ** status is ACX_STATUS_0_STOPPED */ -+ del_timer_sync(&adev->mgmt_timer); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_open -+** -+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP -+** from clear to set. In other words: ifconfig up. -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxmem_e_open(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = OK; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ acx_init_task_scheduler(adev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */ -+ -+ /* request shared IRQ handler */ -+ if (request_irq(ndev->irq, acxmem_i_interrupt, SA_INTERRUPT, ndev->name, ndev)) { -+ printk("%s: request_irq FAILED\n", ndev->name); -+ result = -EAGAIN; -+ goto done; -+ } -+ set_irq_type (ndev->irq, IRQT_FALLING); -+ log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq); -+ -+ /* ifup device */ -+ acxmem_s_up(ndev); -+ -+ /* We don't currently have to do anything else. -+ * The setup of the MAC should be subsequently completed via -+ * the mlme commands. -+ * Higher layers know we're ready from dev->start==1 and -+ * dev->tbusy==0. Our rx path knows to pass up received/ -+ * frames because of dev->flags&IFF_UP is true. -+ */ -+done: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_close -+** -+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP -+** from set to clear. I.e. called by "ifconfig DEV down" -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxmem_e_close(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* ifdown device */ -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ if (netif_device_present(ndev)) { -+ acxmem_s_down(ndev); -+ } -+ -+ /* disable all IRQs, release shared IRQ handler */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ free_irq(ndev->irq, ndev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */ -+ -+ /* We currently don't have to do anything else. -+ * Higher layers know we're not ready from dev->start==0 and -+ * dev->tbusy==1. Our rx path knows to not pass up received -+ * frames because of dev->flags&IFF_UP is false. -+ */ -+ acx_sem_unlock(adev); -+ -+ log(L_INIT, "closed device\n"); -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_tx_timeout -+** -+** Called from network core. Must not sleep! -+*/ -+static void -+acxmem_i_tx_timeout(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ unsigned int tx_num_cleaned; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* clean processed tx descs, they may have been completely full */ -+ tx_num_cleaned = acxmem_l_clean_txdesc(adev); -+ -+ /* nothing cleaned, yet (almost) no free buffers available? -+ * --> clean all tx descs, no matter which status!! -+ * Note that I strongly suspect that doing emergency cleaning -+ * may confuse the firmware. This is a last ditch effort to get -+ * ANYTHING to work again... -+ * -+ * TODO: it's best to simply reset & reinit hw from scratch... -+ */ -+ if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) { -+ printk("%s: FAILED to free any of the many full tx buffers. " -+ "Switching to emergency freeing. " -+ "Please report!\n", ndev->name); -+ acxmem_l_clean_txdesc_emergency(adev); -+ } -+ -+ if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status)) -+ acx_wake_queue(ndev, "after tx timeout"); -+ -+ /* stall may have happened due to radio drift, so recalib radio */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ -+ /* do unimportant work last */ -+ printk("%s: tx timeout!\n", ndev->name); -+ adev->stats.tx_errors++; -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_set_multicast_list -+** FIXME: most likely needs refinement -+*/ -+static void -+acxmem_i_set_multicast_list(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* firmwares don't have allmulti capability, -+ * so just use promiscuous mode instead in this case. */ -+ if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) { -+ SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ /* let kernel know in case *we* needed to set promiscuous */ -+ ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI); -+ } else { -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI); -+ } -+ -+ /* cannot update card settings directly here, atomic context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_l_process_rxdesc -+** -+** Called directly and only from the IRQ handler -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_rxbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_rxbuffer(const acx_device_t *adev) -+{ -+ register const struct rxhostdesc *rxhostdesc; -+ int i; -+ /* no FN_ENTER here, we don't want that */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ if (unlikely(!rxhostdesc)) return; -+ for (i = 0; i < RX_CNT; i++) { -+ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) -+ printk("rx: buf %d full\n", i); -+ rxhostdesc++; -+ } -+} -+#endif -+ -+static void -+acxmem_l_process_rxdesc(acx_device_t *adev) -+{ -+ register rxhostdesc_t *hostdesc; -+ register rxdesc_t *rxdesc; -+ unsigned count, tail; -+ u32 addr; -+ u8 Ctl_8; -+ -+ FN_ENTER; -+ -+ if (unlikely(acx_debug & L_BUFR)) -+ log_rxbuffer(adev); -+ -+ /* First, have a loop to determine the first descriptor that's -+ * full, just in case there's a mismatch between our current -+ * rx_tail and the full descriptor we're supposed to handle. */ -+ tail = adev->rx_tail; -+ count = RX_CNT; -+ while (1) { -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ rxdesc = &adev->rxdesc_start[tail]; -+ /* advance tail regardless of outcome of the below test */ -+ tail = (tail + 1) % RX_CNT; -+ -+ /* -+ * Unlike the PCI interface, where the ACX can write directly to -+ * the host descriptors, on the slave memory interface we have to -+ * pull these. All we really need to do is check the Ctl_8 field -+ * in the rx descriptor on the ACX, which should be 0x11000000 if -+ * we should process it. -+ */ -+ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ if ((Ctl_8 & DESC_CTL_HOSTOWN) && -+ (Ctl_8 & DESC_CTL_ACXDONE)) -+ break; /* found it! */ -+ -+ if (unlikely(!--count)) /* hmm, no luck: all descs empty, bail out */ -+ goto end; -+ } -+ -+ /* now process descriptors, starting with the first we figured out */ -+ while (1) { -+ log(L_BUFR, "rx: tail=%u Ctl_8=%02X\n", tail, Ctl_8); -+ /* -+ * If the ACX has CTL_RECLAIM set on this descriptor there -+ * is no buffer associated; it just wants us to tell it to -+ * reclaim the memory. -+ */ -+ if (!(Ctl_8 & DESC_CTL_RECLAIM)) { -+ -+ /* -+ * slave interface - pull data now -+ */ -+ hostdesc->length = read_slavemem16 (adev, (u32) &(rxdesc->total_length)); -+ -+ /* -+ * hostdesc->data is an rxbuffer_t, which includes header information, -+ * but the length in the data packet doesn't. The header information -+ * takes up an additional 12 bytes, so add that to the length we copy. -+ */ -+ addr = read_slavemem32 (adev, (u32) &(rxdesc->ACXMemPtr)); -+ if (addr) { -+ /* -+ * How can &(rxdesc->ACXMemPtr) above ever be zero? Looks like we -+ * get that now and then - try to trap it for debug. -+ */ -+ if (addr & 0xffff0000) { -+ printk("rxdesc 0x%08x\n", (u32) rxdesc); -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("Bad access!"); -+ } -+ chaincopy_from_slavemem (adev, (u8 *) hostdesc->data, addr, -+ hostdesc->length + -+ (u32) &((rxbuffer_t *)0)->hdr_a3); -+ acx_l_process_rxbuf(adev, hostdesc->data); -+ } -+ } -+ else { -+ printk ("rx reclaim only!\n"); -+ } -+ -+ hostdesc->Status = 0; -+ -+ /* -+ * Let the ACX know we're done. -+ */ -+ CLEAR_BIT (Ctl_8, DESC_CTL_HOSTOWN); -+ SET_BIT (Ctl_8, DESC_CTL_HOSTDONE); -+ SET_BIT (Ctl_8, DESC_CTL_RECLAIM); -+ write_slavemem8 (adev, (u32) &rxdesc->Ctl_8, Ctl_8); -+ -+ /* -+ * Now tell the ACX we've finished with the receive buffer so -+ * it can finish the reclaim. -+ */ -+ write_reg16 (adev, IO_ACX_INT_TRIG, INT_TRIG_RXPRC); -+ -+ /* ok, descriptor is handled, now check the next descriptor */ -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ rxdesc = &adev->rxdesc_start[tail]; -+ -+ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ -+ /* if next descriptor is empty, then bail out */ -+ if (!(Ctl_8 & DESC_CTL_HOSTOWN) || !(Ctl_8 & DESC_CTL_ACXDONE)) -+ break; -+ -+ tail = (tail + 1) % RX_CNT; -+ } -+end: -+ adev->rx_tail = tail; -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_interrupt -+** -+** IRQ handler (atomic context, must not sleep, blah, blah) -+*/ -+ -+/* scan is complete. all frames now on the receive queue are valid */ -+#define INFO_SCAN_COMPLETE 0x0001 -+#define INFO_WEP_KEY_NOT_FOUND 0x0002 -+/* hw has been reset as the result of a watchdog timer timeout */ -+#define INFO_WATCH_DOG_RESET 0x0003 -+/* failed to send out NULL frame from PS mode notification to AP */ -+/* recommended action: try entering 802.11 PS mode again */ -+#define INFO_PS_FAIL 0x0004 -+/* encryption/decryption process on a packet failed */ -+#define INFO_IV_ICV_FAILURE 0x0005 -+ -+/* Info mailbox format: -+2 bytes: type -+2 bytes: status -+more bytes may follow -+ rumors say about status: -+ 0x0000 info available (set by hw) -+ 0x0001 information received (must be set by host) -+ 0x1000 info available, mailbox overflowed (messages lost) (set by hw) -+ but in practice we've seen: -+ 0x9000 when we did not set status to 0x0001 on prev message -+ 0x1001 when we did set it -+ 0x0000 was never seen -+ conclusion: this is really a bitfield: -+ 0x1000 is 'info available' bit -+ 'mailbox overflowed' bit is 0x8000, not 0x1000 -+ value of 0x0000 probably means that there are no messages at all -+ P.S. I dunno how in hell hw is supposed to notice that messages are lost - -+ it does NOT clear bit 0x0001, and this bit will probably stay forever set -+ after we set it once. Let's hope this will be fixed in firmware someday -+*/ -+ -+static void -+handle_info_irq(acx_device_t *adev) -+{ -+#if ACX_DEBUG -+ static const char * const info_type_msg[] = { -+ "(unknown)", -+ "scan complete", -+ "WEP key not found", -+ "internal watchdog reset was done", -+ "failed to send powersave (NULL frame) notification to AP", -+ "encrypt/decrypt on a packet has failed", -+ "TKIP tx keys disabled", -+ "TKIP rx keys disabled", -+ "TKIP rx: key ID not found", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "TKIP IV value exceeds thresh" -+ }; -+#endif -+ u32 info_type, info_status; -+ -+ info_type = read_slavemem32 (adev, (u32) adev->info_area); -+ -+ info_status = (info_type >> 16); -+ info_type = (u16)info_type; -+ -+ /* inform fw that we have read this info message */ -+ write_slavemem32(adev, (u32) adev->info_area, info_type | 0x00010000); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK); -+ write_flush(adev); -+ -+ log(L_CTL, "info_type:%04X info_status:%04X\n", -+ info_type, info_status); -+ -+ log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n", -+ info_status, info_type, -+ info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ? -+ 0 : info_type] -+ ); -+} -+ -+ -+static void -+log_unusual_irq(u16 irqtype) { -+ /* -+ if (!printk_ratelimit()) -+ return; -+ */ -+ -+ printk("acx: got"); -+ if (irqtype & HOST_INT_TX_XFER) { -+ printk(" Tx_Xfer"); -+ } -+ if (irqtype & HOST_INT_RX_COMPLETE) { -+ printk(" Rx_Complete"); -+ } -+ if (irqtype & HOST_INT_DTIM) { -+ printk(" DTIM"); -+ } -+ if (irqtype & HOST_INT_BEACON) { -+ printk(" Beacon"); -+ } -+ if (irqtype & HOST_INT_TIMER) { -+ log(L_IRQ, " Timer"); -+ } -+ if (irqtype & HOST_INT_KEY_NOT_FOUND) { -+ printk(" Key_Not_Found"); -+ } -+ if (irqtype & HOST_INT_IV_ICV_FAILURE) { -+ printk(" IV_ICV_Failure (crypto)"); -+ } -+ /* HOST_INT_CMD_COMPLETE */ -+ /* HOST_INT_INFO */ -+ if (irqtype & HOST_INT_OVERFLOW) { -+ printk(" Overflow"); -+ } -+ if (irqtype & HOST_INT_PROCESS_ERROR) { -+ printk(" Process_Error"); -+ } -+ /* HOST_INT_SCAN_COMPLETE */ -+ if (irqtype & HOST_INT_FCS_THRESHOLD) { -+ printk(" FCS_Threshold"); -+ } -+ if (irqtype & HOST_INT_UNKNOWN) { -+ printk(" Unknown"); -+ } -+ printk(" IRQ(s)\n"); -+} -+ -+ -+static void -+update_link_quality_led(acx_device_t *adev) -+{ -+ int qual; -+ -+ qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise); -+ if (qual > adev->brange_max_quality) -+ qual = adev->brange_max_quality; -+ -+ if (time_after(jiffies, adev->brange_time_last_state_change + -+ (HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) { -+ acxmem_l_power_led(adev, (adev->brange_last_state == 0)); -+ adev->brange_last_state ^= 1; /* toggle */ -+ adev->brange_time_last_state_change = jiffies; -+ } -+} -+ -+ -+#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* a la orinoco.c */ -+ -+static irqreturn_t -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+acxmem_i_interrupt(int irq, void *dev_id) -+#else -+acxmwm_i_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+#endif -+{ -+ acx_device_t *adev; -+ unsigned long flags; -+ unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY; -+ register u16 irqtype; -+ u16 unmasked; -+ -+ adev = ndev2adev((struct net_device*)dev_id); -+ -+ /* LOCKING: can just spin_lock() since IRQs are disabled anyway. -+ * I am paranoid */ -+ acx_lock(adev, flags); -+ -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ if (unlikely(0xffff == unmasked)) { -+ /* 0xffff value hints at missing hardware, -+ * so don't do anything. -+ * Not very clean, but other drivers do the same... */ -+ log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n"); -+ goto none; -+ } -+ -+ /* We will check only "interesting" IRQ types */ -+ irqtype = unmasked & ~adev->irq_mask; -+ if (!irqtype) { -+ /* We are on a shared IRQ line and it wasn't our IRQ */ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n", -+ unmasked, adev->irq_mask); -+ goto none; -+ } -+ -+ /* Done here because IRQ_NONEs taking three lines of log -+ ** drive me crazy */ -+ FN_ENTER; -+ -+#define IRQ_ITERATE 1 -+#if IRQ_ITERATE -+if (jiffies != adev->irq_last_jiffies) { -+ adev->irq_loops_this_jiffy = 0; -+ adev->irq_last_jiffies = jiffies; -+} -+ -+/* safety condition; we'll normally abort loop below -+ * in case no IRQ type occurred */ -+while (likely(--irqcount)) { -+#endif -+ /* ACK all IRQs ASAP */ -+ write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff); -+ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n", -+ unmasked, adev->irq_mask, irqtype); -+ -+ /* Handle most important IRQ types first */ -+ if (irqtype & HOST_INT_RX_DATA) { -+ log(L_IRQ, "got Rx_Data IRQ\n"); -+ acxmem_l_process_rxdesc(adev); -+ } -+ if (irqtype & HOST_INT_TX_COMPLETE) { -+ log(L_IRQ, "got Tx_Complete IRQ\n"); -+ /* don't clean up on each Tx complete, wait a bit -+ * unless we're going towards full, in which case -+ * we do it immediately, too (otherwise we might lockup -+ * with a full Tx buffer if we go into -+ * acxmem_l_clean_txdesc() at a time when we won't wakeup -+ * the net queue in there for some reason...) */ -+ if (adev->tx_free <= TX_START_CLEAN) { -+#if TX_CLEANUP_IN_SOFTIRQ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP); -+#else -+ acxmem_l_clean_txdesc(adev); -+#endif -+ } -+ } -+ -+ /* Less frequent ones */ -+ if (irqtype & (0 -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ | HOST_INT_SCAN_COMPLETE -+ )) { -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ log(L_IRQ, "got Command_Complete IRQ\n"); -+ /* save the state for the running issue_cmd() */ -+ SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE); -+ } -+ if (irqtype & HOST_INT_INFO) { -+ handle_info_irq(adev); -+ } -+ if (irqtype & HOST_INT_SCAN_COMPLETE) { -+ log(L_IRQ, "got Scan_Complete IRQ\n"); -+ /* need to do that in process context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN); -+ /* remember that fw is not scanning anymore */ -+ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); -+ } -+ } -+ -+ /* These we just log, but either they happen rarely -+ * or we keep them masked out */ -+ if (irqtype & (0 -+ /* | HOST_INT_RX_DATA */ -+ /* | HOST_INT_TX_COMPLETE */ -+ | HOST_INT_TX_XFER -+ | HOST_INT_RX_COMPLETE -+ | HOST_INT_DTIM -+ | HOST_INT_BEACON -+ | HOST_INT_TIMER -+ | HOST_INT_KEY_NOT_FOUND -+ | HOST_INT_IV_ICV_FAILURE -+ /* | HOST_INT_CMD_COMPLETE */ -+ /* | HOST_INT_INFO */ -+ | HOST_INT_OVERFLOW -+ | HOST_INT_PROCESS_ERROR -+ /* | HOST_INT_SCAN_COMPLETE */ -+ | HOST_INT_FCS_THRESHOLD -+ | HOST_INT_UNKNOWN -+ )) { -+ log_unusual_irq(irqtype); -+ } -+ -+#if IRQ_ITERATE -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ irqtype = unmasked & ~adev->irq_mask; -+ /* Bail out if no new IRQ bits or if all are masked out */ -+ if (!irqtype) -+ break; -+ -+ if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) { -+ printk(KERN_ERR "acx: too many interrupts per jiffy!\n"); -+ /* Looks like card floods us with IRQs! Try to stop that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ /* This will short-circuit all future attempts to handle IRQ. -+ * We cant do much more... */ -+ adev->irq_mask = 0; -+ break; -+ } -+} -+#endif -+ /* Routine to perform blink with range */ -+ if (unlikely(adev->led_power == 2)) -+ update_link_quality_led(adev); -+ -+/* handled: */ -+ /* write_flush(adev); - not needed, last op was read anyway */ -+ acx_unlock(adev, flags); -+ FN_EXIT0; -+ return IRQ_HANDLED; -+ -+none: -+ acx_unlock(adev, flags); -+ return IRQ_NONE; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_power_led -+*/ -+void -+acxmem_l_power_led(acx_device_t *adev, int enable) -+{ -+ u16 gpio_pled = IS_ACX111(adev) ? 0x0040 : 0x0800; -+ -+ /* A hack. Not moving message rate limiting to adev->xxx -+ * (it's only a debug message after all) */ -+ static int rate_limit = 0; -+ -+ if (rate_limit++ < 3) -+ log(L_IOCTL, "Please report in case toggling the power " -+ "LED doesn't work for your card!\n"); -+ if (enable) -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled); -+ else -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled); -+} -+ -+ -+/*********************************************************************** -+** Ioctls -+*/ -+ -+/*********************************************************************** -+*/ -+int -+acx111pci_ioctl_info( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+#if ACX_DEBUG > 1 -+ acx_device_t *adev = ndev2adev(ndev); -+ rxdesc_t *rxdesc; -+ txdesc_t *txdesc; -+ rxhostdesc_t *rxhostdesc; -+ txhostdesc_t *txhostdesc; -+ struct acx111_ie_memoryconfig memconf; -+ struct acx111_ie_queueconfig queueconf; -+ unsigned long flags; -+ int i; -+ char memmap[0x34]; -+ char rxconfig[0x8]; -+ char fcserror[0x8]; -+ char ratefallback[0x5]; -+ -+ if ( !(acx_debug & (L_IOCTL|L_DEBUG)) ) -+ return OK; -+ /* using printk() since we checked debug flag already */ -+ -+ acx_sem_lock(adev); -+ -+ if (!IS_ACX111(adev)) { -+ printk("acx111-specific function called " -+ "with non-acx111 chip, aborting\n"); -+ goto end_ok; -+ } -+ -+ /* get Acx111 Memory Configuration */ -+ memset(&memconf, 0, sizeof(memconf)); -+ /* BTW, fails with 12 (Write only) error code. -+ ** Retained for easy testing of issue_cmd error handling :) */ -+ printk ("Interrogating queue config\n"); -+ acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG); -+ printk ("done with queue config\n"); -+ -+ /* get Acx111 Queue Configuration */ -+ memset(&queueconf, 0, sizeof(queueconf)); -+ printk ("Interrogating mem config options\n"); -+ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); -+ printk ("done with mem config options\n"); -+ -+ /* get Acx111 Memory Map */ -+ memset(memmap, 0, sizeof(memmap)); -+ printk ("Interrogating mem map\n"); -+ acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP); -+ printk ("done with mem map\n"); -+ -+ /* get Acx111 Rx Config */ -+ memset(rxconfig, 0, sizeof(rxconfig)); -+ printk ("Interrogating rxconfig\n"); -+ acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG); -+ printk ("done with queue rxconfig\n"); -+ -+ /* get Acx111 fcs error count */ -+ memset(fcserror, 0, sizeof(fcserror)); -+ printk ("Interrogating fcs err count\n"); -+ acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT); -+ printk ("done with err count\n"); -+ -+ /* get Acx111 rate fallback */ -+ memset(ratefallback, 0, sizeof(ratefallback)); -+ printk ("Interrogating rate fallback\n"); -+ acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK); -+ printk ("done with rate fallback\n"); -+ -+ /* force occurrence of a beacon interrupt */ -+ /* TODO: comment why is this necessary */ -+ write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON); -+ -+ /* dump Acx111 Mem Configuration */ -+ printk("dump mem config:\n" -+ "data read: %d, struct size: %d\n" -+ "Number of stations: %1X\n" -+ "Memory block size: %1X\n" -+ "tx/rx memory block allocation: %1X\n" -+ "count rx: %X / tx: %X queues\n" -+ "options %1X\n" -+ "fragmentation %1X\n" -+ "Rx Queue 1 Count Descriptors: %X\n" -+ "Rx Queue 1 Host Memory Start: %X\n" -+ "Tx Queue 1 Count Descriptors: %X\n" -+ "Tx Queue 1 Attributes: %X\n", -+ memconf.len, (int) sizeof(memconf), -+ memconf.no_of_stations, -+ memconf.memory_block_size, -+ memconf.tx_rx_memory_block_allocation, -+ memconf.count_rx_queues, memconf.count_tx_queues, -+ memconf.options, -+ memconf.fragmentation, -+ memconf.rx_queue1_count_descs, -+ acx2cpu(memconf.rx_queue1_host_rx_start), -+ memconf.tx_queue1_count_descs, -+ memconf.tx_queue1_attributes); -+ -+ /* dump Acx111 Queue Configuration */ -+ printk("dump queue head:\n" -+ "data read: %d, struct size: %d\n" -+ "tx_memory_block_address (from card): %X\n" -+ "rx_memory_block_address (from card): %X\n" -+ "rx1_queue address (from card): %X\n" -+ "tx1_queue address (from card): %X\n" -+ "tx1_queue attributes (from card): %X\n", -+ queueconf.len, (int) sizeof(queueconf), -+ queueconf.tx_memory_block_address, -+ queueconf.rx_memory_block_address, -+ queueconf.rx1_queue_address, -+ queueconf.tx1_queue_address, -+ queueconf.tx1_attributes); -+ -+ /* dump Acx111 Mem Map */ -+ printk("dump mem map:\n" -+ "data read: %d, struct size: %d\n" -+ "Code start: %X\n" -+ "Code end: %X\n" -+ "WEP default key start: %X\n" -+ "WEP default key end: %X\n" -+ "STA table start: %X\n" -+ "STA table end: %X\n" -+ "Packet template start: %X\n" -+ "Packet template end: %X\n" -+ "Queue memory start: %X\n" -+ "Queue memory end: %X\n" -+ "Packet memory pool start: %X\n" -+ "Packet memory pool end: %X\n" -+ "iobase: %p\n" -+ "iobase2: %p\n", -+ *((u16 *)&memmap[0x02]), (int) sizeof(memmap), -+ *((u32 *)&memmap[0x04]), -+ *((u32 *)&memmap[0x08]), -+ *((u32 *)&memmap[0x0C]), -+ *((u32 *)&memmap[0x10]), -+ *((u32 *)&memmap[0x14]), -+ *((u32 *)&memmap[0x18]), -+ *((u32 *)&memmap[0x1C]), -+ *((u32 *)&memmap[0x20]), -+ *((u32 *)&memmap[0x24]), -+ *((u32 *)&memmap[0x28]), -+ *((u32 *)&memmap[0x2C]), -+ *((u32 *)&memmap[0x30]), -+ adev->iobase, -+ adev->iobase2); -+ -+ /* dump Acx111 Rx Config */ -+ printk("dump rx config:\n" -+ "data read: %d, struct size: %d\n" -+ "rx config: %X\n" -+ "rx filter config: %X\n", -+ *((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig), -+ *((u16 *)&rxconfig[0x04]), -+ *((u16 *)&rxconfig[0x06])); -+ -+ /* dump Acx111 fcs error */ -+ printk("dump fcserror:\n" -+ "data read: %d, struct size: %d\n" -+ "fcserrors: %X\n", -+ *((u16 *)&fcserror[0x02]), (int) sizeof(fcserror), -+ *((u32 *)&fcserror[0x04])); -+ -+ /* dump Acx111 rate fallback */ -+ printk("dump rate fallback:\n" -+ "data read: %d, struct size: %d\n" -+ "ratefallback: %X\n", -+ *((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback), -+ *((u8 *)&ratefallback[0x04])); -+ -+ /* protect against IRQ */ -+ acx_lock(adev, flags); -+ -+ /* dump acx111 internal rx descriptor ring buffer */ -+ rxdesc = adev->rxdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump internal rxdesc %d:\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n" -+ "RxStatus (dynamic) 0x%X\n" -+ "Mod/Pre (dynamic) 0x%X\n", -+ i, -+ rxdesc, -+ acx2cpu(rxdesc->pNextDesc), -+ acx2cpu(rxdesc->ACXMemPtr), -+ rxdesc->Ctl_8, -+ rxdesc->rate, -+ rxdesc->error, -+ rxdesc->SNR); -+ rxdesc++; -+ } -+ -+ /* dump host rx descriptor ring buffer */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump host rxdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ rxhostdesc, -+ acx2cpu(rxhostdesc->data_phy), -+ rxhostdesc->data_offset, -+ le16_to_cpu(rxhostdesc->Ctl_16), -+ le16_to_cpu(rxhostdesc->length), -+ acx2cpu(rxhostdesc->desc_phy_next), -+ rxhostdesc->Status); -+ rxhostdesc++; -+ } -+ -+ /* dump acx111 internal tx descriptor ring buffer */ -+ txdesc = adev->txdesc_start; -+ -+ /* loop over complete transmit pool */ -+ if (txdesc) for (i = 0; i < TX_CNT; i++) { -+ printk("\ndump internal txdesc %d:\n" -+ "size 0x%X\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "host mem pointer (dynamic) 0x%X\n" -+ "length (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "CTL2 (dynamic) 0x%X\n" -+ "Status (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n", -+ i, -+ (int) sizeof(struct txdesc), -+ txdesc, -+ acx2cpu(txdesc->pNextDesc), -+ acx2cpu(txdesc->AcxMemPtr), -+ acx2cpu(txdesc->HostMemPtr), -+ le16_to_cpu(txdesc->total_length), -+ txdesc->Ctl_8, -+ txdesc->Ctl2_8, txdesc->error, -+ txdesc->u.r1.rate); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ -+ /* dump host tx descriptor ring buffer */ -+ -+ txhostdesc = adev->txhostdesc_start; -+ -+ /* loop over complete host send pool */ -+ if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) { -+ printk("\ndump host txdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ txhostdesc, -+ acx2cpu(txhostdesc->data_phy), -+ txhostdesc->data_offset, -+ le16_to_cpu(txhostdesc->Ctl_16), -+ le16_to_cpu(txhostdesc->length), -+ acx2cpu(txhostdesc->desc_phy_next), -+ le32_to_cpu(txhostdesc->Status)); -+ txhostdesc++; -+ } -+ -+ /* write_reg16(adev, 0xb4, 0x4); */ -+ -+ acx_unlock(adev, flags); -+end_ok: -+ -+ acx_sem_unlock(adev); -+#endif /* ACX_DEBUG */ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100mem_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ u16 gpio_old; -+ -+ if (!IS_ACX100(adev)) { -+ /* WARNING!!! -+ * Removing this check *might* damage -+ * hardware, since we're tweaking GPIOs here after all!!! -+ * You've been warned... -+ * WARNING!!! */ -+ printk("acx: sorry, setting bias level for non-acx100 " -+ "is not supported yet\n"); -+ return OK; -+ } -+ -+ if (*extra > 7) { -+ printk("acx: invalid bias parameter, range is 0-7\n"); -+ return -EINVAL; -+ } -+ -+ acx_sem_lock(adev); -+ -+ /* Need to lock accesses to [IO_ACX_GPIO_OUT]: -+ * IRQ handler uses it to update LED */ -+ acx_lock(adev, flags); -+ gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT); -+ write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8)); -+ acx_unlock(adev, flags); -+ -+ log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old); -+ printk("%s: PHY power amplifier bias: old:%d, new:%d\n", -+ ndev->name, -+ (gpio_old & 0x0700) >> 8, (unsigned char)*extra); -+ -+ acx_sem_unlock(adev); -+ -+ return OK; -+} -+ -+/*************************************************************** -+** acxmem_l_alloc_tx -+** Actually returns a txdesc_t* ptr -+** -+** FIXME: in case of fragments, should allocate multiple descrs -+** after figuring out how many we need and whether we still have -+** sufficiently many. -+*/ -+tx_t* -+acxmem_l_alloc_tx(acx_device_t *adev) -+{ -+ struct txdesc *txdesc; -+ unsigned head; -+ u8 ctl8; -+ static int txattempts = 0; -+ -+ FN_ENTER; -+ -+ if (unlikely(!adev->tx_free)) { -+ printk("acx: BUG: no free txdesc left\n"); -+ /* -+ * Probably the ACX ignored a transmit attempt and now there's a packet -+ * sitting in the queue we think should be transmitting but the ACX doesn't -+ * know about. -+ * On the first pass, send the ACX a TxProc interrupt to try moving -+ * things along, and if that doesn't work (ie, we get called again) completely -+ * flush the transmit queue. -+ */ -+ if (txattempts < 10) { -+ txattempts++; -+ printk ("acx: trying to wake up ACX\n"); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); -+ write_flush(adev); } -+ else { -+ txattempts = 0; -+ printk ("acx: flushing transmit queue.\n"); -+ acxmem_l_clean_txdesc_emergency (adev); -+ } -+ txdesc = NULL; -+ goto end; -+ } -+ -+ /* -+ * Make a quick check to see if there is transmit buffer space on -+ * the ACX. This can't guarantee there is enough space for the packet -+ * since we don't yet know how big it is, but it will prevent at least some -+ * annoyances. -+ */ -+ if (!adev->acx_txbuf_blocks_free) { -+ txdesc = NULL; -+ goto end; -+ } -+ -+ head = adev->tx_head; -+ /* -+ * txdesc points to ACX memory -+ */ -+ txdesc = get_txdesc(adev, head); -+ ctl8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ -+ /* -+ * If we don't own the buffer (HOSTOWN) it is certainly not free; however, -+ * we may have previously thought we had enough memory to send -+ * a packet, allocated the buffer then gave up when we found not enough -+ * transmit buffer space on the ACX. In that case, HOSTOWN and -+ * ACXDONE will both be set. -+ */ -+ if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_HOSTOWN))) { -+ /* whoops, descr at current index is not free, so probably -+ * ring buffer already full */ -+ printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find " -+ "free txdesc\n", head, ctl8); -+ txdesc = NULL; -+ goto end; -+ } -+ -+ /* Needed in case txdesc won't be eventually submitted for tx */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_ACXDONE_HOSTOWN); -+ -+ adev->tx_free--; -+ log(L_BUFT, "tx: got desc %u, %u remain\n", -+ head, adev->tx_free); -+ /* Keep a few free descs between head and tail of tx ring. -+ ** It is not absolutely needed, just feels safer */ -+ if (adev->tx_free < TX_STOP_QUEUE) { -+ log(L_BUF, "stop queue (%u tx desc left)\n", -+ adev->tx_free); -+ acx_stop_queue(adev->ndev, NULL); -+ } -+ -+ /* returning current descriptor, so advance to next free one */ -+ adev->tx_head = (head + 1) % TX_CNT; -+end: -+ FN_EXIT0; -+ -+ return (tx_t*)txdesc; -+} -+ -+ -+/*************************************************************** -+** acxmem_l_dealloc_tx -+** Clears out a previously allocatedvoid acxmem_l_dealloc_tx(tx_t *tx_opaque); -+ transmit descriptor. The ACX -+** can get confused if we skip transmit descriptors in the queue, -+** so when we don't need a descriptor return it to its original -+** state and move the queue head pointer back. -+** -+*/ -+void -+acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque) -+{ -+ /* -+ * txdesc is the address of the descriptor on the ACX. -+ */ -+ txdesc_t *txdesc = (txdesc_t*)tx_opaque; -+ txdesc_t tmptxdesc; -+ int index; -+ -+ memset (&tmptxdesc, 0, sizeof(tmptxdesc)); -+ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; -+ tmptxdesc.u.r1.rate = 0x0a; -+ -+ /* -+ * Clear out all of the transmit descriptor except for the next pointer -+ */ -+ copy_to_slavemem (adev, (u32) &(txdesc->HostMemPtr), -+ (u8 *) &(tmptxdesc.HostMemPtr), -+ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc)); -+ -+ /* -+ * This is only called immediately after we've allocated, so we should -+ * be able to set the head back to this descriptor. -+ */ -+ index = ((u8*) txdesc - (u8*)adev->txdesc_start) / adev->txdesc_size; -+ printk ("acx_dealloc: moving head from %d to %d\n", adev->tx_head, index); -+ adev->tx_head = index; -+} -+ -+ -+/*********************************************************************** -+*/ -+void* -+acxmem_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) -+{ -+ return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_tx_data -+** -+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). -+** Can be called from acx_i_start_xmit (data frames from net core). -+** -+** FIXME: in case of fragments, should loop over the number of -+** pre-allocated tx descrs, properly setting up transfer data and -+** CTL_xxx flags according to fragment number. -+*/ -+void -+acxmem_update_queue_indicator (acx_device_t *adev, int txqueue) -+{ -+#ifdef USING_MORE_THAN_ONE_TRANSMIT_QUEUE -+ u32 indicator; -+ unsigned long flags; -+ int count; -+ -+ /* -+ * Can't handle an interrupt while we're fiddling with the ACX's lock, -+ * according to TI. The ACX is supposed to hold fw_lock for at most -+ * 500ns. -+ */ -+ local_irq_save (flags); -+ -+ /* -+ * Wait for ACX to release the lock (at most 500ns). -+ */ -+ count = 0; -+ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) -+ && (count++ < 50)) { -+ ndelay (10); -+ } -+ if (count < 50) { -+ -+ /* -+ * Take out the host lock - anything non-zero will work, so don't worry about -+ * be/le -+ */ -+ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 1); -+ -+ /* -+ * Avoid a race condition -+ */ -+ count = 0; -+ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) -+ && (count++ < 50)) { -+ ndelay (10); -+ } -+ -+ if (count < 50) { -+ /* -+ * Mark the queue active -+ */ -+ indicator = read_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator)); -+ indicator |= cpu_to_le32 (1 << txqueue); -+ write_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator), indicator); -+ } -+ -+ /* -+ * Release the host lock -+ */ -+ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 0); -+ -+ } -+ -+ /* -+ * Restore interrupts -+ */ -+ local_irq_restore (flags); -+#endif -+} -+ -+void -+acxmem_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len) -+{ -+ /* -+ * txdesc is the address on the ACX -+ */ -+ txdesc_t *txdesc = (txdesc_t*)tx_opaque; -+ txhostdesc_t *hostdesc1, *hostdesc2; -+ client_t *clt; -+ u16 rate_cur; -+ u8 Ctl_8, Ctl2_8; -+ u32 addr; -+ -+ FN_ENTER; -+ /* fw doesn't tx such packets anyhow */ -+ if (unlikely(len < WLAN_HDR_A3_LEN)) -+ goto end; -+ -+ hostdesc1 = get_txhostdesc(adev, txdesc); -+ /* modify flag status in separate variable to be able to write it back -+ * in one big swoop later (also in order to have less device memory -+ * accesses) */ -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */ -+ -+ hostdesc2 = hostdesc1 + 1; -+ -+ /* DON'T simply set Ctl field to 0 here globally, -+ * it needs to maintain a consistent flag status (those are state flags!!), -+ * otherwise it may lead to severe disruption. Only set or reset particular -+ * flags at the exact moment this is needed... */ -+ -+ /* let chip do RTS/CTS handshaking before sending -+ * in case packet size exceeds threshold */ -+ if (len > adev->rts_threshold) -+ SET_BIT(Ctl2_8, DESC_CTL2_RTS); -+ else -+ CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS); -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1); -+ break; -+ case ACX_MODE_2_STA: -+ clt = adev->ap_client; -+ break; -+#if 0 -+/* testing was done on acx111: */ -+ case ACX_MODE_MONITOR: -+ SET_BIT(Ctl2_8, 0 -+/* sends CTS to self before packet */ -+ + DESC_CTL2_SEQ /* don't increase sequence field */ -+/* not working (looks like good fcs is still added) */ -+ + DESC_CTL2_FCS /* don't add the FCS */ -+/* not tested */ -+ + DESC_CTL2_MORE_FRAG -+/* not tested */ -+ + DESC_CTL2_RETRY /* don't increase retry field */ -+/* not tested */ -+ + DESC_CTL2_POWER /* don't increase power mgmt. field */ -+/* no effect */ -+ + DESC_CTL2_WEP /* encrypt this frame */ -+/* not tested */ -+ + DESC_CTL2_DUR /* don't increase duration field */ -+ ); -+ /* fallthrough */ -+#endif -+ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ -+ clt = NULL; -+ break; -+ } -+ -+ rate_cur = clt ? clt->rate_cur : adev->rate_bcast; -+ if (unlikely(!rate_cur)) { -+ printk("acx: driver bug! bad ratemask\n"); -+ goto end; -+ } -+ -+ /* used in tx cleanup routine for auto rate and accounting: */ -+ put_txcr(adev, txdesc, clt, rate_cur); -+ -+ write_slavemem16 (adev, (u32) &(txdesc->total_length), cpu_to_le16(len)); -+ hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN); -+ if (IS_ACX111(adev)) { -+ /* note that if !txdesc->do_auto, txrate->cur -+ ** has only one nonzero bit */ -+ txdesc->u.r2.rate111 = cpu_to_le16( -+ rate_cur -+ /* WARNING: I was never able to make it work with prism54 AP. -+ ** It was falling down to 1Mbit where shortpre is not applicable, -+ ** and not working at all at "5,11 basic rates only" setting. -+ ** I even didn't see tx packets in radio packet capture. -+ ** Disabled for now --vda */ -+ /*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */ -+ ); -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ /* should add this to rate111 above as necessary */ -+ | (clt->pbcc511 ? RATE111_PBCC511 : 0) -+#endif -+ hostdesc1->length = cpu_to_le16(len); -+ } else { /* ACX100 */ -+ u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100; -+ write_slavemem8 (adev, (u32) &(txdesc->u.r1.rate), rate_100); -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ if (clt->pbcc511) { -+ if (n == RATE100_5 || n == RATE100_11) -+ n |= RATE100_PBCC511; -+ } -+ -+ if (clt->shortpre && (clt->cur != RATE111_1)) -+ SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */ -+#endif -+ /* set autodma and reclaim and 1st mpdu */ -+ SET_BIT(Ctl_8, DESC_CTL_FIRSTFRAG); -+ -+#if ACX_FRAGMENTATION -+ /* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */ -+#endif -+ hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN); -+ -+ /* -+ * Since we're not using autodma copy the packet data to the acx now. -+ * Even host descriptors point to the packet header, and the odd indexed -+ * descriptor following points to the packet data. -+ * -+ * The first step is to find free memory in the ACX transmit buffers. -+ * They don't necessarily map one to one with the transmit queue entries, -+ * so search through them starting just after the last one used. -+ */ -+ addr = allocate_acx_txbuf_space (adev, len); -+ if (addr) { -+ chaincopy_to_slavemem (adev, addr, hostdesc1->data, len); -+ } -+ else { -+ /* -+ * Bummer. We thought we might have enough room in the transmit -+ * buffers to send this packet, but it turns out we don't. alloc_tx -+ * has already marked this transmit descriptor as HOSTOWN and ACXDONE, -+ * which means the ACX will hang when it gets to this descriptor unless -+ * we do something about it. Having a bubble in the transmit queue just -+ * doesn't seem to work, so we have to reset this transmit queue entry's -+ * state to its original value and back up our head pointer to point -+ * back to this entry. -+ */ -+ hostdesc1->length = 0; -+ hostdesc2->length = 0; -+ write_slavemem16 (adev, (u32) &(txdesc->total_length), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG); -+ adev->tx_head = ((u8*) txdesc - (u8*) adev->txdesc_start) / adev->txdesc_size; -+ goto end; -+ } -+ /* -+ * Tell the ACX where the packet is. -+ */ -+ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), addr); -+ -+ } -+ /* don't need to clean ack/rts statistics here, already -+ * done on descr cleanup */ -+ -+ /* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors -+ * are now owned by the acx100; do this as LAST operation */ -+ CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN); -+ /* flush writes before we release hostdesc to the adapter here */ -+ //wmb(); -+ -+ /* write back modified flags */ -+ /* -+ * At this point Ctl_8 should just be FIRSTFRAG -+ */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl2_8),Ctl2_8); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), Ctl_8); -+ /* unused: txdesc->tx_time = cpu_to_le32(jiffies); */ -+ -+ /* -+ * Update the queue indicator to say there's data on the first queue. -+ */ -+ acxmem_update_queue_indicator (adev, 0); -+ -+ /* flush writes before we tell the adapter that it's its turn now */ -+ mmiowb(); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); -+ write_flush(adev); -+ -+ /* log the packet content AFTER sending it, -+ * in order to not delay sending any further than absolutely needed -+ * Do separate logs for acx100/111 to have human-readable rates */ -+ if (unlikely(acx_debug & (L_XFER|L_DATA))) { -+ u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc; -+ if (IS_ACX111(adev)) -+ printk("tx: pkt (%s): len %d " -+ "rate %04X%s status %u\n", -+ acx_get_packet_type_string(le16_to_cpu(fc)), len, -+ le16_to_cpu(txdesc->u.r2.rate111), -+ (le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "", -+ adev->status); -+ else -+ printk("tx: pkt (%s): len %d rate %03u%s status %u\n", -+ acx_get_packet_type_string(fc), len, -+ read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)), -+ (Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "", -+ adev->status); -+ -+ if (acx_debug & L_DATA) { -+ printk("tx: 802.11 [%d]: ", len); -+ acx_dump_bytes(hostdesc1->data, len); -+ } -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_clean_txdesc -+** -+** This function resets the txdescs' status when the ACX100 -+** signals the TX done IRQ (txdescs have been processed), starting with -+** the pool index of the descriptor which we would use next, -+** in order to make sure that we can be as fast as possible -+** in filling new txdescs. -+** Everytime we get called we know where the next packet to be cleaned is. -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_txbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_txbuffer(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ u8 Ctl_8; -+ -+ /* no FN_ENTER here, we don't want that */ -+ /* no locks here, since it's entirely non-critical code */ -+ txdesc = adev->txdesc_start; -+ if (unlikely(!txdesc)) return; -+ printk("tx: desc->Ctl8's:"); -+ for (i = 0; i < TX_CNT; i++) { -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ printk(" %02X", Ctl_8); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ printk("\n"); -+} -+#endif -+ -+ -+static void -+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger) -+{ -+ const char *err = "unknown error"; -+ -+ /* hmm, should we handle this as a mask -+ * of *several* bits? -+ * For now I think only caring about -+ * individual bits is ok... */ -+ switch (error) { -+ case 0x01: -+ err = "no Tx due to error in other fragment"; -+ adev->wstats.discard.fragment++; -+ break; -+ case 0x02: -+ err = "Tx aborted"; -+ adev->stats.tx_aborted_errors++; -+ break; -+ case 0x04: -+ err = "Tx desc wrong parameters"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x08: -+ err = "WEP key not found"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x10: -+ err = "MSDU lifetime timeout? - try changing " -+ "'iwconfig retry lifetime XXX'"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x20: -+ err = "excessive Tx retries due to either distance " -+ "too high or unable to Tx or Tx frame error - " -+ "try changing 'iwconfig txpower XXX' or " -+ "'sens'itivity or 'retry'"; -+ adev->wstats.discard.retries++; -+ /* Tx error 0x20 also seems to occur on -+ * overheating, so I'm not sure whether we -+ * actually want to do aggressive radio recalibration, -+ * since people maybe won't notice then that their hardware -+ * is slowly getting cooked... -+ * Or is it still a safe long distance from utter -+ * radio non-functionality despite many radio recalibs -+ * to final destructive overheating of the hardware? -+ * In this case we really should do recalib here... -+ * I guess the only way to find out is to do a -+ * potentially fatal self-experiment :-\ -+ * Or maybe only recalib in case we're using Tx -+ * rate auto (on errors switching to lower speed -+ * --> less heat?) or 802.11 power save mode? -+ * -+ * ok, just do it. */ -+ if (++adev->retry_errors_msg_ratelimit % 4 == 0) { -+ if (adev->retry_errors_msg_ratelimit <= 20) { -+ printk("%s: several excessive Tx " -+ "retry errors occurred, attempting " -+ "to recalibrate radio. Radio " -+ "drift might be caused by increasing " -+ "card temperature, please check the card " -+ "before it's too late!\n", -+ adev->ndev->name); -+ if (adev->retry_errors_msg_ratelimit == 20) -+ printk("disabling above message\n"); -+ } -+ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ } -+ break; -+ case 0x40: -+ err = "Tx buffer overflow"; -+ adev->stats.tx_fifo_errors++; -+ break; -+ case 0x80: -+ err = "DMA error"; -+ adev->wstats.discard.misc++; -+ break; -+ } -+ adev->stats.tx_errors++; -+ if (adev->stats.tx_errors <= 20) -+ printk("%s: tx error 0x%02X, buf %02u! (%s)\n", -+ adev->ndev->name, error, finger, err); -+ else -+ printk("%s: tx error 0x%02X, buf %02u!\n", -+ adev->ndev->name, error, finger); -+} -+ -+ -+unsigned int -+acxmem_l_clean_txdesc(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ unsigned finger; -+ int num_cleaned; -+ u16 r111; -+ u8 error, ack_failures, rts_failures, rts_ok, r100, Ctl_8; -+ u32 acxmem; -+ txdesc_t tmptxdesc; -+ -+ FN_ENTER; -+ -+ /* -+ * Set up a template descriptor for re-initialization. The only -+ * things that get set are Ctl_8 and the rate, and the rate defaults -+ * to 1Mbps. -+ */ -+ memset (&tmptxdesc, 0, sizeof (tmptxdesc)); -+ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; -+ tmptxdesc.u.r1.rate = 0x0a; -+ -+ if (unlikely(acx_debug & L_DEBUG)) -+ log_txbuffer(adev); -+ -+ log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail); -+ -+ /* We know first descr which is not free yet. We advance it as far -+ ** as we see correct bits set in following descs (if next desc -+ ** is NOT free, we shouldn't advance at all). We know that in -+ ** front of tx_tail may be "holes" with isolated free descs. -+ ** We will catch up when all intermediate descs will be freed also */ -+ -+ finger = adev->tx_tail; -+ num_cleaned = 0; -+ while (likely(finger != adev->tx_head)) { -+ txdesc = get_txdesc(adev, finger); -+ -+ /* If we allocated txdesc on tx path but then decided -+ ** to NOT use it, then it will be left as a free "bubble" -+ ** in the "allocated for tx" part of the ring. -+ ** We may meet it on the next ring pass here. */ -+ -+ /* stop if not marked as "tx finished" and "host owned" */ -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ if ((Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN) -+ != DESC_CTL_ACXDONE_HOSTOWN) { -+ if (unlikely(!num_cleaned)) { /* maybe remove completely */ -+ log(L_BUFT, "clean_txdesc: tail isn't free. " -+ "tail:%d head:%d\n", -+ adev->tx_tail, adev->tx_head); -+ } -+ break; -+ } -+ -+ /* remember desc values... */ -+ error = read_slavemem8 (adev, (u32) &(txdesc->error)); -+ ack_failures = read_slavemem8 (adev, (u32) &(txdesc->ack_failures)); -+ rts_failures = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures)); -+ rts_ok = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok)); -+ r100 = read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)); -+ r111 = le16_to_cpu(read_slavemem16 (adev, (u32) &(txdesc->u.r2.rate111))); -+ -+ /* need to check for certain error conditions before we -+ * clean the descriptor: we still need valid descr data here */ -+ if (unlikely(0x30 & error)) { -+ /* only send IWEVTXDROP in case of retry or lifetime exceeded; -+ * all other errors mean we screwed up locally */ -+ union iwreq_data wrqu; -+ wlan_hdr_t *hdr; -+ txhostdesc_t *hostdesc; -+ -+ hostdesc = get_txhostdesc(adev, txdesc); -+ hdr = (wlan_hdr_t *)hostdesc->data; -+ MAC_COPY(wrqu.addr.sa_data, hdr->a1); -+ wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL); -+ } -+ -+ /* -+ * Free up the transmit data buffers -+ */ -+ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (acxmem) { -+ reclaim_acx_txbuf_space (adev, acxmem); -+ } -+ -+ /* ...and free the desc by clearing all the fields -+ except the next pointer */ -+ copy_to_slavemem (adev, -+ (u32) &(txdesc->HostMemPtr), -+ (u8 *) &(tmptxdesc.HostMemPtr), -+ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc) -+ ); -+ -+ adev->tx_free++; -+ num_cleaned++; -+ -+ if ((adev->tx_free >= TX_START_QUEUE) -+ && (adev->status == ACX_STATUS_4_ASSOCIATED) -+ && (acx_queue_stopped(adev->ndev)) -+ ) { -+ log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n", -+ adev->tx_free); -+ acx_wake_queue(adev->ndev, NULL); -+ } -+ -+ /* do error checking, rate handling and logging -+ * AFTER having done the work, it's faster */ -+ -+ /* do rate handling */ -+ if (adev->rate_auto) { -+ struct client *clt = get_txc(adev, txdesc); -+ if (clt) { -+ u16 cur = get_txr(adev, txdesc); -+ if (clt->rate_cur == cur) { -+ acx_l_handle_txrate_auto(adev, clt, -+ cur, /* intended rate */ -+ r100, r111, /* actually used rate */ -+ (error & 0x30), /* was there an error? */ -+ TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free); -+ } -+ } -+ } -+ -+ if (unlikely(error)) -+ handle_tx_error(adev, error, finger); -+ -+ if (IS_ACX111(adev)) -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n", -+ finger, ack_failures, rts_failures, rts_ok, r111); -+ else -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n", -+ finger, ack_failures, rts_failures, rts_ok, r100); -+ -+ /* update pointer for descr to be cleaned next */ -+ finger = (finger + 1) % TX_CNT; -+ } -+ -+ /* remember last position */ -+ adev->tx_tail = finger; -+/* end: */ -+ FN_EXIT1(num_cleaned); -+ return num_cleaned; -+} -+ -+/* clean *all* Tx descriptors, and regardless of their previous state. -+ * Used for brute-force reset handling. */ -+void -+acxmem_l_clean_txdesc_emergency(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ u32 acxmem; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc = get_txdesc(adev, i); -+ -+ /* free it */ -+ write_slavemem8 (adev, (u32) &(txdesc->ack_failures), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->error), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN); -+ -+ /* -+ * Clean up the memory allocated on the ACX for this transmit descriptor. -+ */ -+ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (acxmem) { -+ reclaim_acx_txbuf_space (adev, acxmem); -+ } -+ -+ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), 0); -+ } -+ -+ adev->tx_free = TX_CNT; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_create_tx_host_desc_queue -+*/ -+ -+static void* -+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg) -+{ -+ void *ptr; -+ ptr = kmalloc (size, GFP_KERNEL); -+ /* -+ * The ACX can't use the physical address, so we'll have to fake it -+ * later and it might be handy to have the virtual address. -+ */ -+ *phy = (dma_addr_t) NULL; -+ -+ if (ptr) { -+ log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n", -+ msg, (int)size, ptr, (unsigned long long)*phy); -+ memset(ptr, 0, size); -+ return ptr; -+ } -+ printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n", -+ msg, (int)size); -+ return NULL; -+} -+ -+ -+/* -+ * In the generic slave memory access mode, most of the stuff in -+ * the txhostdesc_t is unused. It's only here because the rest of -+ * the ACX driver expects it to be since the PCI version uses indirect -+ * host memory organization with DMA. Since we're not using DMA the -+ * only use we have for the host descriptors is to store the packets -+ * on the way out. -+ */ -+static int -+acxmem_s_create_tx_host_desc_queue(acx_device_t *adev) -+{ -+ txhostdesc_t *hostdesc; -+ u8 *txbuf; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate TX buffer */ -+ adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS; -+ -+ adev->txbuf_start = allocate(adev, adev->txbuf_area_size, -+ &adev->txbuf_startphy, "txbuf_start"); -+ if (!adev->txbuf_start) -+ goto fail; -+ -+ /* allocate the TX host descriptor queue pool */ -+ adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc); -+ -+ adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size, -+ &adev->txhostdesc_startphy, "txhostdesc_start"); -+ if (!adev->txhostdesc_start) -+ goto fail; -+ -+ /* check for proper alignment of TX host descriptor pool */ -+ if ((long) adev->txhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ hostdesc = adev->txhostdesc_start; -+ txbuf = adev->txbuf_start; -+ -+#if 0 -+/* Each tx buffer is accessed by hardware via -+** txdesc -> txhostdesc(s) -> txbuffer(s). -+** We use only one txhostdesc per txdesc, but it looks like -+** acx111 is buggy: it accesses second txhostdesc -+** (via hostdesc.desc_phy_next field) even if -+** txdesc->length == hostdesc->length and thus -+** entire packet was placed into first txhostdesc. -+** Due to this bug acx111 hangs unless second txhostdesc -+** has le16_to_cpu(hostdesc.length) = 3 (or larger) -+** Storing NULL into hostdesc.desc_phy_next -+** doesn't seem to help. -+** -+** Update: although it worked on Xterasys XN-2522g -+** with len=3 trick, WG311v2 is even more bogus, doesn't work. -+** Keeping this code (#ifdef'ed out) for documentational purposes. -+*/ -+ for (i = 0; i < TX_CNT*2; i++) { -+ hostdesc_phy += sizeof(*hostdesc); -+ if (!(i & 1)) { -+ hostdesc->data_phy = cpu2acx(txbuf_phy); -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); -+ /* hostdesc->length = ... */ -+ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); -+ hostdesc->pNext = ptr2acx(NULL); -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ hostdesc->data = txbuf; -+ -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS; -+ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS; -+ } else { -+ /* hostdesc->data_phy = ... */ -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ /* hostdesc->Ctl_16 = ... */ -+ hostdesc->length = cpu_to_le16(3); /* bug workaround */ -+ /* hostdesc->desc_phy_next = ... */ -+ /* hostdesc->pNext = ... */ -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ /* hostdesc->data = ... */ -+ } -+ hostdesc++; -+ } -+#endif -+/* We initialize two hostdescs so that they point to adjacent -+** memory areas. Thus txbuf is really just a contiguous memory area */ -+ for (i = 0; i < TX_CNT*2; i++) { -+ /* ->data is a non-hardware field: */ -+ hostdesc->data = txbuf; -+ -+ if (!(i & 1)) { -+ txbuf += WLAN_HDR_A3_LEN; -+ } else { -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; -+ } -+ hostdesc++; -+ } -+ hostdesc--; -+ -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_tx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxmem_s_create_rx_host_desc_queue -+*/ -+/* the whole size of a data buffer (header plus data body) -+ * plus 32 bytes safety offset at the end */ -+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32) -+ -+static int -+acxmem_s_create_rx_host_desc_queue(acx_device_t *adev) -+{ -+ rxhostdesc_t *hostdesc; -+ rxbuffer_t *rxbuf; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate the RX host descriptor queue pool */ -+ adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc); -+ -+ adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size, -+ &adev->rxhostdesc_startphy, "rxhostdesc_start"); -+ if (!adev->rxhostdesc_start) -+ goto fail; -+ -+ /* check for proper alignment of RX host descriptor pool */ -+ if ((long) adev->rxhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ /* allocate Rx buffer pool which will be used by the acx -+ * to store the whole content of the received frames in it */ -+ adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE; -+ -+ adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size, -+ &adev->rxbuf_startphy, "rxbuf_start"); -+ if (!adev->rxbuf_start) -+ goto fail; -+ -+ rxbuf = adev->rxbuf_start; -+ hostdesc = adev->rxhostdesc_start; -+ -+ /* don't make any popular C programming pointer arithmetic mistakes -+ * here, otherwise I'll kill you... -+ * (and don't dare asking me why I'm warning you about that...) */ -+ for (i = 0; i < RX_CNT; i++) { -+ hostdesc->data = rxbuf; -+ hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE); -+ rxbuf++; -+ hostdesc++; -+ } -+ hostdesc--; -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_rx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxmem_s_create_hostdesc_queues -+*/ -+int -+acxmem_s_create_hostdesc_queues(acx_device_t *adev) -+{ -+ int result; -+ result = acxmem_s_create_tx_host_desc_queue(adev); -+ if (OK != result) return result; -+ result = acxmem_s_create_rx_host_desc_queue(adev); -+ return result; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_tx_desc_queue -+*/ -+static void -+acxmem_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start) -+{ -+ txdesc_t *txdesc; -+ u32 clr; -+ int i; -+ -+ FN_ENTER; -+ -+ if (IS_ACX100(adev)) -+ adev->txdesc_size = sizeof(*txdesc); -+ else -+ /* the acx111 txdesc is 4 bytes larger */ -+ adev->txdesc_size = sizeof(*txdesc) + 4; -+ -+ /* -+ * This refers to an ACX address, not one of ours -+ */ -+ adev->txdesc_start = (txdesc_t *) tx_queue_start; -+ -+ log(L_DEBUG, "adev->txdesc_start=%p\n", -+ adev->txdesc_start); -+ -+ adev->tx_free = TX_CNT; -+ /* done by memset: adev->tx_head = 0; */ -+ /* done by memset: adev->tx_tail = 0; */ -+ txdesc = adev->txdesc_start; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111 has a preinitialized Tx buffer! */ -+ /* loop over whole send pool */ -+ /* FIXME: do we have to do the hostmemptr stuff here?? */ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; -+ /* reserve two (hdr desc and payload desc) */ -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ } else { -+ /* ACX100 Tx buffer needs to be initialized by us */ -+ /* clear whole send pool. sizeof is safe here (we are acx100) */ -+ -+ /* -+ * adev->txdesc_start refers to device memory, so we can't write -+ * directly to it. -+ */ -+ clr = (u32) adev->txdesc_start; -+ while (clr < (u32) adev->txdesc_start + (TX_CNT * sizeof(*txdesc))) { -+ write_slavemem32 (adev, clr, 0); -+ clr += 4; -+ } -+ -+ /* loop over whole send pool */ -+ for (i = 0; i < TX_CNT; i++) { -+ log(L_DEBUG, "configure card tx descriptor: 0x%p, " -+ "size: 0x%X\n", txdesc, adev->txdesc_size); -+ -+ /* initialise ctl */ -+ /* -+ * No auto DMA here -+ */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), -+ (u8) (DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG)); -+ /* done by memset(0): txdesc->Ctl2_8 = 0; */ -+ -+ /* point to next txdesc */ -+ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), -+ (u32) cpu_to_le32 ((u8 *) txdesc + adev->txdesc_size)); -+ -+ /* go to the next one */ -+ /* ++ is safe here (we are acx100) */ -+ txdesc++; -+ } -+ /* go back to the last one */ -+ txdesc--; -+ /* and point to the first making it a ring buffer */ -+ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), -+ (u32) cpu_to_le32 (tx_queue_start)); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_rx_desc_queue -+*/ -+static void -+acxmem_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start) -+{ -+ rxdesc_t *rxdesc; -+ u32 mem_offs; -+ int i; -+ -+ FN_ENTER; -+ -+ /* done by memset: adev->rx_tail = 0; */ -+ -+ /* ACX111 doesn't need any further config: preconfigures itself. -+ * Simply print ring buffer for debugging */ -+ if (IS_ACX111(adev)) { -+ /* rxdesc_start already set here */ -+ -+ adev->rxdesc_start = (rxdesc_t *) rx_queue_start; -+ -+ rxdesc = adev->rxdesc_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc); -+ rxdesc = adev->rxdesc_start = (rxdesc_t *) -+ acx2cpu(rxdesc->pNextDesc); -+ } -+ } else { -+ /* we didn't pre-calculate rxdesc_start in case of ACX100 */ -+ /* rxdesc_start should be right AFTER Tx pool */ -+ adev->rxdesc_start = (rxdesc_t *) -+ ((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t))); -+ /* NB: sizeof(txdesc_t) above is valid because we know -+ ** we are in if (acx100) block. Beware of cut-n-pasting elsewhere! -+ ** acx111's txdesc is larger! */ -+ -+ mem_offs = (u32) adev->rxdesc_start; -+ while (mem_offs < (u32) adev->rxdesc_start + (RX_CNT * sizeof (*rxdesc))) { -+ write_slavemem32 (adev, mem_offs, 0); -+ mem_offs += 4; -+ } -+ -+ /* loop over whole receive pool */ -+ rxdesc = adev->rxdesc_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc); -+ /* point to next rxdesc */ -+ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), -+ (u32) cpu_to_le32 ((u8 *) rxdesc + sizeof(*rxdesc))); -+ /* go to the next one */ -+ rxdesc++; -+ } -+ /* go to the last one */ -+ rxdesc--; -+ -+ /* and point to the first making it a ring buffer */ -+ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), -+ (u32) cpu_to_le32 (rx_queue_start)); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_desc_queues -+*/ -+void -+acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start) -+{ -+ u32 *p; -+ int i; -+ -+ acxmem_create_tx_desc_queue(adev, tx_queue_start); -+ acxmem_create_rx_desc_queue(adev, rx_queue_start); -+ p = (u32 *) adev->acx_queue_indicator; -+ for (i = 0; i < 4; i++) { -+ write_slavemem32 (adev, (u32) p, 0); -+ p++; -+ } -+} -+ -+ -+/*************************************************************** -+** acxmem_s_proc_diag_output -+*/ -+char* -+acxmem_s_proc_diag_output(char *p, acx_device_t *adev) -+{ -+ const char *rtl, *thd, *ttl; -+ txdesc_t *txdesc; -+ u8 Ctl_8; -+ rxdesc_t *rxdesc; -+ int i; -+ u32 tmp; -+ txdesc_t txd; -+ u8 buf[0x200]; -+ int j, k; -+ -+ FN_ENTER; -+ -+#if DUMP_MEM_DURING_DIAG > 0 -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("dump finished"); -+#endif -+ -+ p += sprintf(p, "** Rx buf **\n"); -+ rxdesc = adev->rxdesc_start; -+ if (rxdesc) for (i = 0; i < RX_CNT; i++) { -+ rtl = (i == adev->rx_tail) ? " [tail]" : ""; -+ Ctl_8 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ if (Ctl_8 & DESC_CTL_HOSTOWN) -+ p += sprintf(p, "%02u (%02x) FULL%s\n", i, Ctl_8, rtl); -+ else -+ p += sprintf(p, "%02u (%02x) empty%s\n", i, Ctl_8, rtl); -+ rxdesc++; -+ } -+ p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free, -+ acx_queue_stopped(adev->ndev) ? "STOPPED" : "running"); -+ -+ p += sprintf(p, "** Tx buf %d blocks total, %d available, free list head %04x\n", -+ adev->acx_txbuf_numblocks, adev->acx_txbuf_blocks_free, adev->acx_txbuf_free); -+ txdesc = adev->txdesc_start; -+ if (txdesc) { -+ for (i = 0; i < TX_CNT; i++) { -+ thd = (i == adev->tx_head) ? " [head]" : ""; -+ ttl = (i == adev->tx_tail) ? " [tail]" : ""; -+ copy_from_slavemem (adev, (u8 *) &txd, (u32) txdesc, sizeof (txd)); -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ if (Ctl_8 & DESC_CTL_ACXDONE) -+ p += sprintf(p, "%02u ready to free (%02X)%s%s", i, Ctl_8, thd, ttl); -+ else if (Ctl_8 & DESC_CTL_HOSTOWN) -+ p += sprintf(p, "%02u available (%02X)%s%s", i, Ctl_8, thd, ttl); -+ else -+ p += sprintf(p, "%02u busy (%02X)%s%s", i, Ctl_8, thd, ttl); -+ tmp = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (tmp) { -+ p += sprintf (p, " %04x", tmp); -+ while ((tmp = read_slavemem32 (adev, (u32) tmp)) != 0x02000000) { -+ tmp <<= 5; -+ p += sprintf (p, " %04x", tmp); -+ } -+ } -+ p += sprintf (p, "\n"); -+ p += sprintf (p, " %04x: %04x %04x %04x %04x %04x %04x %04x %04x %04x %04x %02x %02x %02x %02x\n" -+ "%02x %02x %02x %02x %04x\n", -+ (u32) txdesc, -+ txd.pNextDesc.v, txd.HostMemPtr.v, txd.AcxMemPtr.v, txd.tx_time, -+ txd.total_length, txd.Reserved, -+ txd.dummy[0], txd.dummy[1], txd.dummy[2], txd.dummy[3], -+ txd.Ctl_8, txd.Ctl2_8, txd.error, txd.ack_failures, -+ txd.u.rts.rts_failures, txd.u.rts.rts_ok, txd.u.r1.rate, txd.u.r1.queue_ctrl, -+ txd.queue_info -+ ); -+ if (txd.AcxMemPtr.v) { -+ copy_from_slavemem (adev, buf, txd.AcxMemPtr.v, sizeof (buf)); -+ for (j = 0; (j < txd.total_length) && (j<(sizeof(buf)-4)); j+=16) { -+ p += sprintf (p, " "); -+ for (k = 0; (k < 16) && (j+k < txd.total_length); k++) { -+ p += sprintf (p, " %02x", buf[j+k+4]); -+ } -+ p += sprintf (p, "\n"); -+ } -+ } -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ } -+ -+ p += sprintf(p, -+ "\n" -+ "** Generic slave data **\n" -+ "irq_mask 0x%04x irq_status 0x%04x irq on acx 0x%04x\n" -+ "txbuf_start 0x%p, txbuf_area_size %u\n" -+ "txdesc_size %u, txdesc_start 0x%p\n" -+ "txhostdesc_start 0x%p, txhostdesc_area_size %u\n" -+ "txbuf start 0x%04x, txbuf size %d\n" -+ "rxdesc_start 0x%p\n" -+ "rxhostdesc_start 0x%p, rxhostdesc_area_size %u\n" -+ "rxbuf_start 0x%p, rxbuf_area_size %u\n", -+ adev->irq_mask, adev->irq_status, read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES), -+ adev->txbuf_start, adev->txbuf_area_size, -+ adev->txdesc_size, adev->txdesc_start, -+ adev->txhostdesc_start, adev->txhostdesc_area_size, -+ adev->acx_txbuf_start, adev->acx_txbuf_numblocks * adev->memblocksize, -+ adev->rxdesc_start, -+ adev->rxhostdesc_start, adev->rxhostdesc_area_size, -+ adev->rxbuf_start, adev->rxbuf_area_size); -+ FN_EXIT0; -+ return p; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxmem_proc_eeprom_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ int i; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < 0x400; i++) { -+ acxmem_read_eeprom_byte(adev, i, p++); -+ } -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+*/ -+void -+acxmem_set_interrupt_mask(acx_device_t *adev) -+{ -+ if (IS_ACX111(adev)) { -+ adev->irq_mask = (u16) ~(0 -+ | HOST_INT_RX_DATA -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ /* | HOST_INT_RX_COMPLETE */ -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ | HOST_INT_IV_ICV_FAILURE -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ | HOST_INT_OVERFLOW -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ | HOST_INT_FCS_THRESHOLD -+ | HOST_INT_UNKNOWN -+ ); -+ /* Or else acx100 won't signal cmd completion, right? */ -+ adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */ -+ } else { -+ adev->irq_mask = (u16) ~(0 -+ | HOST_INT_RX_DATA -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ /* | HOST_INT_RX_COMPLETE */ -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ /* | HOST_INT_IV_ICV_FAILURE */ -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ /* | HOST_INT_OVERFLOW */ -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ /* | HOST_INT_FCS_THRESHOLD */ -+ /* | HOST_INT_BEACON_MISSED */ -+ ); -+ adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */ -+ } -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm) -+{ -+ struct acx111_ie_tx_level tx_level; -+ -+ /* since it can be assumed that at least the Maxim radio has a -+ * maximum power output of 20dBm and since it also can be -+ * assumed that these values drive the DAC responsible for -+ * setting the linear Tx level, I'd guess that these values -+ * should be the corresponding linear values for a dBm value, -+ * in other words: calculate the values from that formula: -+ * Y [dBm] = 10 * log (X [mW]) -+ * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm) -+ * and you're done... -+ * Hopefully that's ok, but you never know if we're actually -+ * right... (especially since Windows XP doesn't seem to show -+ * actual Tx dBm values :-P) */ -+ -+ /* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the -+ * values are EXACTLY mW!!! Not sure about RFMD and others, -+ * though... */ -+ static const u8 dbm2val_maxim[21] = { -+ 63, 63, 63, 62, -+ 61, 61, 60, 60, -+ 59, 58, 57, 55, -+ 53, 50, 47, 43, -+ 38, 31, 23, 13, -+ 0 -+ }; -+ static const u8 dbm2val_rfmd[21] = { -+ 0, 0, 0, 1, -+ 2, 2, 3, 3, -+ 4, 5, 6, 8, -+ 10, 13, 16, 20, -+ 25, 32, 41, 50, -+ 63 -+ }; -+ const u8 *table; -+ -+ switch (adev->radio_type) { -+ case RADIO_MAXIM_0D: -+ table = &dbm2val_maxim[0]; -+ break; -+ case RADIO_RFMD_11: -+ case RADIO_RALINK_15: -+ table = &dbm2val_rfmd[0]; -+ break; -+ default: -+ printk("%s: unknown/unsupported radio type, " -+ "cannot modify tx power level yet!\n", -+ adev->ndev->name); -+ return NOT_OK; -+ } -+ /* -+ * The hx4700 EEPROM, at least, only supports 1 power setting. The configure -+ * routine matches the PA bias with the gain, so just use its default value. -+ * The values are: 0x2b for the gain and 0x03 for the PA bias. The firmware -+ * writes the gain level to the Tx gain control DAC and the PA bias to the Maxim -+ * radio's PA bias register. The firmware limits itself to 0 - 64 when writing to the -+ * gain control DAC. -+ * -+ * Physically between the ACX and the radio, higher Tx gain control DAC values result -+ * in less power output; 0 volts to the Maxim radio results in the highest output power -+ * level, which I'm assuming matches up with 0 in the Tx Gain DAC register. -+ * -+ * Although there is only the 1 power setting, one of the radio firmware functions adjusts -+ * the transmit power level up and down. That function is called by the ACX FIQ handler -+ * under certain conditions. -+ */ -+ tx_level.level = 1; -+ //return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); -+ -+ printk("%s: changing radio power level to %u dBm (%u)\n", -+ adev->ndev->name, level_dbm, table[level_dbm]); -+ acxmem_s_write_phy_reg(adev, 0x11, table[level_dbm]); -+ -+ return 0; -+} -+ -+ -+static struct platform_driver -+acxmem_drv_id = { -+ .driver = { -+ .name = "acx-mem", -+ }, -+ .probe = acxmem_e_probe, -+ .remove = __devexit_p(acxmem_e_remove), -+#ifdef CONFIG_PM -+ .suspend = acxmem_e_suspend, -+ .resume = acxmem_e_resume -+#endif /* CONFIG_PM */ -+}; -+ -+ -+/*********************************************************************** -+** acxmem_e_init_module -+** -+** Module initialization routine, called once at module load time -+*/ -+int __init -+acxmem_e_init_module(void) -+{ -+ int res; -+ -+ FN_ENTER; -+ -+#if (ACX_IO_WIDTH==32) -+ printk("acx: compiled to use 32bit I/O access. " -+ "I/O timing issues might occur, such as " -+ "non-working firmware upload. Report them\n"); -+#else -+ printk("acx: compiled to use 16bit I/O access only " -+ "(compatibility mode)\n"); -+#endif -+ -+#ifdef __LITTLE_ENDIAN -+#define ENDIANNESS_STRING "running on a little-endian CPU\n" -+#else -+#define ENDIANNESS_STRING "running on a BIG-ENDIAN CPU\n" -+#endif -+ log(L_INIT, -+ ENDIANNESS_STRING -+ "PCI module " ACX_RELEASE " initialized, " -+ "waiting for cards to probe...\n" -+ ); -+ -+ res = platform_driver_register (&acxmem_drv_id); -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_cleanup_module -+** -+** Called at module unload time. This is our last chance to -+** clean up after ourselves. -+*/ -+void __exit -+acxmem_e_cleanup_module(void) -+{ -+ FN_ENTER; -+ -+ printk ("cleanup_module\n"); -+ platform_driver_unregister( &acxmem_drv_id ); -+ -+ FN_EXIT0; -+} -+ -+void acxmem_e_release(struct device *dev) { -+} -+ -+MODULE_AUTHOR( "Todd Blumer " ); -+MODULE_DESCRIPTION( "ACX Slave Memory Driver" ); -+MODULE_LICENSE( "GPL" ); -+ -Index: linux-2.6.22/drivers/net/wireless/acx/pci.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/pci.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,4234 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+#define ACX_PCI 1 -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+ -+/* Linux 2.6.18+ uses */ -+#ifndef UTS_RELEASE -+#include -+#endif -+ -+#include /* required for Lx 2.6.8 ?? */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx.h" -+ -+ -+/*********************************************************************** -+*/ -+#define PCI_TYPE (PCI_USES_MEM | PCI_ADDR0 | PCI_NO_ACPI_WAKE) -+#define PCI_ACX100_REGION1 0x01 -+#define PCI_ACX100_REGION1_SIZE 0x1000 /* Memory size - 4K bytes */ -+#define PCI_ACX100_REGION2 0x02 -+#define PCI_ACX100_REGION2_SIZE 0x10000 /* Memory size - 64K bytes */ -+ -+#define PCI_ACX111_REGION1 0x00 -+#define PCI_ACX111_REGION1_SIZE 0x2000 /* Memory size - 8K bytes */ -+#define PCI_ACX111_REGION2 0x01 -+#define PCI_ACX111_REGION2_SIZE 0x20000 /* Memory size - 128K bytes */ -+ -+/* Texas Instruments Vendor ID */ -+#define PCI_VENDOR_ID_TI 0x104c -+ -+/* ACX100 22Mb/s WLAN controller */ -+#define PCI_DEVICE_ID_TI_TNETW1100A 0x8400 -+#define PCI_DEVICE_ID_TI_TNETW1100B 0x8401 -+ -+/* ACX111 54Mb/s WLAN controller */ -+#define PCI_DEVICE_ID_TI_TNETW1130 0x9066 -+ -+/* PCI Class & Sub-Class code, Network-'Other controller' */ -+#define PCI_CLASS_NETWORK_OTHERS 0x0280 -+ -+#define CARD_EEPROM_ID_SIZE 6 -+ -+#ifndef PCI_D0 -+/* From include/linux/pci.h */ -+#define PCI_D0 0 -+#define PCI_D1 1 -+#define PCI_D2 2 -+#define PCI_D3hot 3 -+#define PCI_D3cold 4 -+#define PCI_UNKNOWN 5 -+#define PCI_POWER_ERROR -1 -+#endif -+ -+ -+/*********************************************************************** -+*/ -+static void acxpci_i_tx_timeout(struct net_device *ndev); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+static irqreturn_t acxpci_i_interrupt(int irq, void *dev_id); -+#else -+static irqreturn_t acxpci_i_interrupt(int irq, void *dev_id, struct pt_regs *regs); -+#endif -+static void acxpci_i_set_multicast_list(struct net_device *ndev); -+ -+static int acxpci_e_open(struct net_device *ndev); -+static int acxpci_e_close(struct net_device *ndev); -+static void acxpci_s_up(struct net_device *ndev); -+static void acxpci_s_down(struct net_device *ndev); -+ -+ -+/*********************************************************************** -+** Register access -+*/ -+ -+/* Pick one */ -+/* #define INLINE_IO static */ -+#define INLINE_IO static inline -+ -+INLINE_IO u32 -+read_reg32(acx_device_t *adev, unsigned int offset) -+{ -+#if ACX_IO_WIDTH == 32 -+ return readl((u8 *)adev->iobase + adev->io[offset]); -+#else -+ return readw((u8 *)adev->iobase + adev->io[offset]) -+ + (readw((u8 *)adev->iobase + adev->io[offset] + 2) << 16); -+#endif -+} -+ -+INLINE_IO u16 -+read_reg16(acx_device_t *adev, unsigned int offset) -+{ -+ return readw((u8 *)adev->iobase + adev->io[offset]); -+} -+ -+INLINE_IO u8 -+read_reg8(acx_device_t *adev, unsigned int offset) -+{ -+ return readb((u8 *)adev->iobase + adev->io[offset]); -+} -+ -+INLINE_IO void -+write_reg32(acx_device_t *adev, unsigned int offset, u32 val) -+{ -+#if ACX_IO_WIDTH == 32 -+ writel(val, (u8 *)adev->iobase + adev->io[offset]); -+#else -+ writew(val & 0xffff, (u8 *)adev->iobase + adev->io[offset]); -+ writew(val >> 16, (u8 *)adev->iobase + adev->io[offset] + 2); -+#endif -+} -+ -+INLINE_IO void -+write_reg16(acx_device_t *adev, unsigned int offset, u16 val) -+{ -+ writew(val, (u8 *)adev->iobase + adev->io[offset]); -+} -+ -+INLINE_IO void -+write_reg8(acx_device_t *adev, unsigned int offset, u8 val) -+{ -+ writeb(val, (u8 *)adev->iobase + adev->io[offset]); -+} -+ -+/* Handle PCI posting properly: -+ * Make sure that writes reach the adapter in case they require to be executed -+ * *before* the next write, by reading a random (and safely accessible) register. -+ * This call has to be made if there is no read following (which would flush the data -+ * to the adapter), yet the written data has to reach the adapter immediately. */ -+INLINE_IO void -+write_flush(acx_device_t *adev) -+{ -+ /* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */ -+ /* faster version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should also be safe): */ -+ readb(adev->iobase); -+} -+ -+INLINE_IO int -+adev_present(acx_device_t *adev) -+{ -+ /* fast version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should be safe): */ -+ return readl(adev->iobase) != 0xffffffff; -+} -+ -+ -+/*********************************************************************** -+*/ -+static inline txdesc_t* -+get_txdesc(acx_device_t *adev, int index) -+{ -+ return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size); -+} -+ -+static inline txdesc_t* -+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc) -+{ -+ return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size); -+} -+ -+static txhostdesc_t* -+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return &adev->txhostdesc_start[index*2]; -+} -+ -+static inline client_t* -+get_txc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return adev->txc[index]; -+} -+ -+static inline u16 -+get_txr(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ index /= adev->txdesc_size; -+ return adev->txr[index]; -+} -+ -+static inline void -+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ adev->txc[index] = c; -+ adev->txr[index] = r111; -+} -+ -+ -+/*********************************************************************** -+** EEPROM and PHY read/write helpers -+*/ -+/*********************************************************************** -+** acxpci_read_eeprom_byte -+** -+** Function called to read an octet in the EEPROM. -+** -+** This function is used by acxpci_e_probe to check if the -+** connected card is a legal one or not. -+** -+** Arguments: -+** adev ptr to acx_device structure -+** addr address to read in the EEPROM -+** charbuf ptr to a char. This is where the read octet -+** will be stored -+*/ -+int -+acxpci_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf) -+{ -+ int result; -+ int count; -+ -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for EEPROM read\n", -+ adev->ndev->name); -+ result = NOT_OK; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ *charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA); -+ log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf); -+ result = OK; -+ -+fail: -+ return result; -+} -+ -+ -+/*********************************************************************** -+** We don't lock hw accesses here since we never r/w eeprom in IRQ -+** Note: this function sleeps only because of GFP_KERNEL alloc -+*/ -+#ifdef UNUSED -+int -+acxpci_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf) -+{ -+ u8 *data_verify = NULL; -+ unsigned long flags; -+ int count, i; -+ int result = NOT_OK; -+ u16 gpio_orig; -+ -+ printk("acx: WARNING! I would write to EEPROM now. " -+ "Since I really DON'T want to unless you know " -+ "what you're doing (THIS CODE WILL PROBABLY " -+ "NOT WORK YET!), I will abort that now. And " -+ "definitely make sure to make a " -+ "/proc/driver/acx_wlan0_eeprom backup copy first!!! " -+ "(the EEPROM content includes the PCI config header!! " -+ "If you kill important stuff, then you WILL " -+ "get in trouble and people DID get in trouble already)\n"); -+ return OK; -+ -+ FN_ENTER; -+ -+ data_verify = kmalloc(len, GFP_KERNEL); -+ if (!data_verify) { -+ goto end; -+ } -+ -+ /* first we need to enable the OE (EEPROM Output Enable) GPIO line -+ * to be able to write to the EEPROM. -+ * NOTE: an EEPROM writing success has been reported, -+ * but you probably have to modify GPIO_OUT, too, -+ * and you probably need to activate a different GPIO -+ * line instead! */ -+ gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE); -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1); -+ write_flush(adev); -+ -+ /* ok, now start writing the data out */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i)); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 1); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("WARNING, DANGER!!! " -+ "Timeout waiting for EEPROM write\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ } -+ -+ /* disable EEPROM writing */ -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig); -+ write_flush(adev); -+ -+ /* now start a verification run */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("timeout waiting for EEPROM read\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ -+ data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA); -+ } -+ -+ if (0 == memcmp(charbuf, data_verify, len)) -+ result = OK; /* read data matches, success */ -+ -+end: -+ kfree(data_verify); -+ FN_EXIT1(result); -+ return result; -+} -+#endif /* UNUSED */ -+ -+ -+/*********************************************************************** -+** acxpci_s_read_phy_reg -+** -+** Messing with rx/tx disabling and enabling here -+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic -+*/ -+int -+acxpci_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) -+{ -+ int result = NOT_OK; -+ int count; -+ -+ FN_ENTER; -+ -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg32(adev, IO_ACX_PHY_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for phy read\n", -+ adev->ndev->name); -+ *charbuf = 0; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ log(L_DEBUG, "count was %u\n", count); -+ *charbuf = read_reg8(adev, IO_ACX_PHY_DATA); -+ -+ log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg); -+ result = OK; -+ goto fail; /* silence compiler warning */ -+fail: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxpci_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) -+{ -+ FN_ENTER; -+ -+ /* mprusko said that 32bit accesses result in distorted sensitivity -+ * on his card. Unconfirmed, looks like it's not true (most likely since we -+ * now properly flush writes). */ -+ write_reg32(adev, IO_ACX_PHY_DATA, value); -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 1); -+ write_flush(adev); -+ log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg); -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+#define NO_AUTO_INCREMENT 1 -+ -+/*********************************************************************** -+** acxpci_s_write_fw -+** -+** Write the firmware image into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** 1 firmware image corrupted -+** 0 success -+*/ -+static int -+acxpci_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset) -+{ -+ int len, size; -+ u32 sum, v32; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+ write_flush(adev); -+#endif -+ -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ sum += p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ len += 4; -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+ write_flush(adev); -+#endif -+ write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32); -+ } -+ -+ log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n", -+ size, sum, le32_to_cpu(fw_image->chksum)); -+ -+ /* compare our checksum with the stored image checksum */ -+ return (sum != le32_to_cpu(fw_image->chksum)); -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_validate_fw -+** -+** Compare the firmware image given with -+** the firmware image written into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** NOT_OK firmware image corrupted or not correctly written -+** OK success -+*/ -+static int -+acxpci_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image, -+ u32 offset) -+{ -+ u32 sum, v32, w32; -+ int len, size; -+ int result = OK; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+#endif -+ -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ p += 4; -+ len += 4; -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+#endif -+ w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA); -+ -+ if (unlikely(w32 != v32)) { -+ printk("acx: FATAL: firmware upload: " -+ "data parts at offset %d don't match (0x%08X vs. 0x%08X)! " -+ "I/O timing issues or defective memory, with DWL-xx0+? " -+ "ACX_IO_WIDTH=16 may help. Please report\n", -+ len, v32, w32); -+ result = NOT_OK; -+ break; -+ } -+ -+ sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24); -+ } -+ -+ /* sum control verification */ -+ if (result != NOT_OK) { -+ if (sum != le32_to_cpu(fw_image->chksum)) { -+ printk("acx: FATAL: firmware upload: " -+ "checksums don't match!\n"); -+ result = NOT_OK; -+ } -+ } -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_upload_fw -+** -+** Called from acx_reset_dev -+*/ -+static int -+acxpci_s_upload_fw(acx_device_t *adev) -+{ -+ firmware_image_t *fw_image = NULL; -+ int res = NOT_OK; -+ int try; -+ u32 file_size; -+ char filename[sizeof("tiacx1NNcNN")]; -+ -+ FN_ENTER; -+ -+ /* print exact chipset and radio ID to make sure people really get a clue on which files exactly they are supposed to provide, -+ * since firmware loading is the biggest enduser PITA with these chipsets. -+ * Not printing radio ID in 0xHEX in order to not confuse them into wrong file naming */ -+ printk( "acx: need to load firmware for acx1%02d chipset with radio ID %02x, please provide via firmware hotplug:\n" -+ "acx: either one file only (ombined firmware image file, radio-specific) or two files (radio-less base image file *plus* separate adio-specific extension file)\n", -+ IS_ACX111(adev)*11, adev->radio_type); -+ -+ /* Try combined, then main image */ -+ adev->need_radio_fw = 0; -+ snprintf(filename, sizeof(filename), "tiacx1%02dc%02X", -+ IS_ACX111(adev)*11, adev->radio_type); -+ -+ fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size); -+ if (!fw_image) { -+ adev->need_radio_fw = 1; -+ filename[sizeof("tiacx1NN")-1] = '\0'; -+ fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size); -+ if (!fw_image) { -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+ } -+ } -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxpci_s_write_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_write_fw (main/combined): %d\n", res); -+ if (OK == res) { -+ res = acxpci_s_validate_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_validate_fw " -+ "(main/combined): %d\n", res); -+ } -+ -+ if (OK == res) { -+ SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED); -+ break; -+ } -+ printk("acx: firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+ vfree(fw_image); -+ -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_upload_radio -+** -+** Uploads the appropriate radio module firmware into the card. -+*/ -+int -+acxpci_s_upload_radio(acx_device_t *adev) -+{ -+ acx_ie_memmap_t mm; -+ firmware_image_t *radio_image; -+ acx_cmd_radioinit_t radioinit; -+ int res = NOT_OK; -+ int try; -+ u32 offset; -+ u32 size; -+ char filename[sizeof("tiacx1NNrNN")]; -+ -+ if (!adev->need_radio_fw) return OK; -+ -+ FN_ENTER; -+ -+ acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+ offset = le32_to_cpu(mm.CodeEnd); -+ -+ snprintf(filename, sizeof(filename), "tiacx1%02dr%02X", -+ IS_ACX111(adev)*11, -+ adev->radio_type); -+ radio_image = acx_s_read_fw(&adev->pdev->dev, filename, &size); -+ if (!radio_image) { -+ printk("acx: can't load radio module '%s'\n", filename); -+ goto fail; -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxpci_s_write_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res); -+ if (OK == res) { -+ res = acxpci_s_validate_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res); -+ } -+ -+ if (OK == res) -+ break; -+ printk("acx: radio firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); -+ radioinit.offset = cpu_to_le32(offset); -+ /* no endian conversion needed, remains in card CPU area: */ -+ radioinit.len = radio_image->size; -+ -+ vfree(radio_image); -+ -+ if (OK != res) -+ goto fail; -+ -+ /* will take a moment so let's have a big timeout */ -+ acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT, -+ &radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000)); -+ -+ res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+fail: -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxpci_l_reset_mac -+** -+** MAC will be reset -+** Call context: reset_dev -+*/ -+static void -+acxpci_l_reset_mac(acx_device_t *adev) -+{ -+ u16 temp; -+ -+ FN_ENTER; -+ -+ /* halt eCPU */ -+ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; -+ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); -+ -+ /* now do soft reset of eCPU, set bit */ -+ temp = read_reg16(adev, IO_ACX_SOFT_RESET) | 0x1; -+ log(L_DEBUG, "%s: enable soft reset...\n", __func__); -+ write_reg16(adev, IO_ACX_SOFT_RESET, temp); -+ write_flush(adev); -+ -+ /* now clear bit again: deassert eCPU reset */ -+ log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__); -+ write_reg16(adev, IO_ACX_SOFT_RESET, temp & ~0x1); -+ -+ /* now start a burst read from initial EEPROM */ -+ temp = read_reg16(adev, IO_ACX_EE_START) | 0x1; -+ write_reg16(adev, IO_ACX_EE_START, temp); -+ write_flush(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_verify_init -+*/ -+static int -+acxpci_s_verify_init(acx_device_t *adev) -+{ -+ int result = NOT_OK; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ timeout = jiffies + 2*HZ; -+ for (;;) { -+ u16 irqstat = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if (irqstat & HOST_INT_FCS_THRESHOLD) { -+ result = OK; -+ write_reg16(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD); -+ break; -+ } -+ if (time_after(jiffies, timeout)) -+ break; -+ /* Init may take up to ~0.5 sec total */ -+ acx_s_msleep(50); -+ } -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** A few low-level helpers -+** -+** Note: these functions are not protected by lock -+** and thus are never allowed to be called from IRQ. -+** Also they must not race with fw upload which uses same hw regs -+*/ -+ -+/*********************************************************************** -+** acxpci_write_cmd_type_status -+*/ -+ -+static inline void -+acxpci_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status) -+{ -+ writel(type | (status << 16), adev->cmd_area); -+ write_flush(adev); -+} -+ -+ -+/*********************************************************************** -+** acxpci_read_cmd_type_status -+*/ -+static u32 -+acxpci_read_cmd_type_status(acx_device_t *adev) -+{ -+ u32 cmd_type, cmd_status; -+ -+ cmd_type = readl(adev->cmd_area); -+ cmd_status = (cmd_type >> 16); -+ cmd_type = (u16)cmd_type; -+ -+ log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n", -+ cmd_type, cmd_status, -+ acx_cmd_status_str(cmd_status)); -+ -+ return cmd_status; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_reset_dev -+** -+** Arguments: -+** netdevice that contains the adev variable -+** Returns: -+** NOT_OK on fail -+** OK on success -+** Side effects: -+** device is hard reset -+** Call context: -+** acxpci_e_probe -+** Comment: -+** This resets the device using low level hardware calls -+** as well as uploads and verifies the firmware to the card -+*/ -+ -+static inline void -+init_mboxes(acx_device_t *adev) -+{ -+ u32 cmd_offs, info_offs; -+ -+ cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS); -+ info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS); -+ adev->cmd_area = (u8 *)adev->iobase2 + cmd_offs; -+ adev->info_area = (u8 *)adev->iobase2 + info_offs; -+ log(L_DEBUG, "iobase2=%p\n" -+ "cmd_mbox_offset=%X cmd_area=%p\n" -+ "info_mbox_offset=%X info_area=%p\n", -+ adev->iobase2, -+ cmd_offs, adev->cmd_area, -+ info_offs, adev->info_area); -+} -+ -+ -+static inline void -+read_eeprom_area(acx_device_t *adev) -+{ -+#if ACX_DEBUG > 1 -+ int offs; -+ u8 tmp; -+ -+ for (offs = 0x8c; offs < 0xb9; offs++) -+ acxpci_read_eeprom_byte(adev, offs, &tmp); -+#endif -+} -+ -+ -+static int -+acxpci_s_reset_dev(acx_device_t *adev) -+{ -+ const char* msg = ""; -+ unsigned long flags; -+ int result = NOT_OK; -+ u16 hardware_info; -+ u16 ecpu_ctrl; -+ int count; -+ -+ FN_ENTER; -+ -+ /* reset the device to make sure the eCPU is stopped -+ * to upload the firmware correctly */ -+ -+ acx_lock(adev, flags); -+ -+ acxpci_l_reset_mac(adev); -+ -+ ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1; -+ if (!ecpu_ctrl) { -+ msg = "eCPU is already running. "; -+ goto end_unlock; -+ } -+ -+#ifdef WE_DONT_NEED_THAT_DO_WE -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) { -+ /* eCPU most likely means "embedded CPU" */ -+ msg = "eCPU did not start after boot from flash. "; -+ goto end_unlock; -+ } -+ -+ /* check sense on reset flags */ -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) { -+ printk("%s: eCPU did not start after boot (SOR), " -+ "is this fatal?\n", adev->ndev->name); -+ } -+#endif -+ /* scan, if any, is stopped now, setting corresponding IRQ bit */ -+ adev->irq_status |= HOST_INT_SCAN_COMPLETE; -+ -+ acx_unlock(adev, flags); -+ -+ /* need to know radio type before fw load */ -+ /* Need to wait for arrival of this information in a loop, -+ * most probably since eCPU runs some init code from EEPROM -+ * (started burst read in reset_mac()) which also -+ * sets the radio type ID */ -+ -+ count = 0xffff; -+ do { -+ hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION); -+ if (!--count) { -+ msg = "eCPU didn't indicate radio type"; -+ goto end_fail; -+ } -+ cpu_relax(); -+ } while (!(hardware_info & 0xff00)); /* radio type still zero? */ -+ -+ /* printk("DEBUG: count %d\n", count); */ -+ adev->form_factor = hardware_info & 0xff; -+ adev->radio_type = hardware_info >> 8; -+ -+ /* load the firmware */ -+ if (OK != acxpci_s_upload_fw(adev)) -+ goto end_fail; -+ -+ /* acx_s_msleep(10); this one really shouldn't be required */ -+ -+ /* now start eCPU by clearing bit */ -+ write_reg16(adev, IO_ACX_ECPU_CTRL, ecpu_ctrl & ~0x1); -+ log(L_DEBUG, "booted eCPU up and waiting for completion...\n"); -+ -+ /* wait for eCPU bootup */ -+ if (OK != acxpci_s_verify_init(adev)) { -+ msg = "timeout waiting for eCPU. "; -+ goto end_fail; -+ } -+ log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n"); -+ -+ init_mboxes(adev); -+ acxpci_write_cmd_type_status(adev, 0, 0); -+ -+ /* test that EEPROM is readable */ -+ read_eeprom_area(adev); -+ -+ result = OK; -+ goto end; -+ -+/* Finish error message. Indicate which function failed */ -+end_unlock: -+ acx_unlock(adev, flags); -+end_fail: -+ printk("acx: %sreset_dev() FAILED\n", msg); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_issue_cmd_timeo -+** -+** Sends command to fw, extract result -+** -+** NB: we do _not_ take lock inside, so be sure to not touch anything -+** which may interfere with IRQ handler operation -+** -+** TODO: busy wait is a bit silly, so: -+** 1) stop doing many iters - go to sleep after first -+** 2) go to waitqueue based approach: wait, not poll! -+*/ -+#undef FUNC -+#define FUNC "issue_cmd" -+ -+#if !ACX_DEBUG -+int -+acxpci_s_issue_cmd_timeo( -+ acx_device_t *adev, -+ unsigned int cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout) -+{ -+#else -+int -+acxpci_s_issue_cmd_timeo_debug( -+ acx_device_t *adev, -+ unsigned cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout, -+ const char* cmdstr) -+{ -+ unsigned long start = jiffies; -+#endif -+ const char *devname; -+ unsigned counter; -+ u16 irqtype; -+ u16 cmd_status; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ devname = adev->ndev->name; -+ if (!devname || !devname[0] || devname[4]=='%') -+ devname = "acx"; -+ -+ log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n", -+ cmdstr, buflen, cmd_timeout, -+ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); -+ -+ if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) { -+ printk("%s: "FUNC"(): firmware is not loaded yet, " -+ "cannot execute commands!\n", devname); -+ goto bad; -+ } -+ -+ if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) { -+ printk("input buffer (len=%u):\n", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ -+ /* wait for firmware to become idle for our command submission */ -+ timeout = HZ/5; -+ counter = (timeout * 1000 / HZ) - 1; /* in ms */ -+ timeout += jiffies; -+ do { -+ cmd_status = acxpci_read_cmd_type_status(adev); -+ /* Test for IDLE state */ -+ if (!cmd_status) -+ break; -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ if (!counter) { -+ /* the card doesn't get idle, we're in trouble */ -+ printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n", -+ devname, cmd_status); -+ goto bad; -+ } else if (counter < 190) { /* if waited >10ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. " -+ "Please report\n", 199 - counter); -+ } -+ -+ /* now write the parameters of the command if needed */ -+ if (buffer && buflen) { -+ /* if it's an INTERROGATE command, just pass the length -+ * of parameters to read, as data */ -+#if CMD_DISCOVERY -+ if (cmd == ACX1xx_CMD_INTERROGATE) -+ memset_io(adev->cmd_area + 4, 0xAA, buflen); -+#endif -+ /* adev->cmd_area points to PCI device's memory, not to RAM! */ -+ memcpy_toio(adev->cmd_area + 4, buffer, -+ (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen); -+ } -+ /* now write the actual command type */ -+ acxpci_write_cmd_type_status(adev, cmd, 0); -+ /* execute command */ -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD); -+ write_flush(adev); -+ -+ /* wait for firmware to process command */ -+ -+ /* Ensure nonzero and not too large timeout. -+ ** Also converts e.g. 100->99, 200->199 -+ ** which is nice but not essential */ -+ cmd_timeout = (cmd_timeout-1) | 1; -+ if (unlikely(cmd_timeout > 1199)) -+ cmd_timeout = 1199; -+ /* clear CMD_COMPLETE bit. can be set only by IRQ handler: */ -+ adev->irq_status &= ~HOST_INT_CMD_COMPLETE; -+ -+ /* we schedule away sometimes (timeout can be large) */ -+ counter = cmd_timeout; -+ timeout = jiffies + cmd_timeout * HZ / 1000; -+ do { -+ if (!adev->irqs_active) { /* IRQ disabled: poll */ -+ irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ write_reg16(adev, IO_ACX_IRQ_ACK, -+ HOST_INT_CMD_COMPLETE); -+ break; -+ } -+ } else { /* Wait when IRQ will set the bit */ -+ irqtype = adev->irq_status; -+ if (irqtype & HOST_INT_CMD_COMPLETE) -+ break; -+ } -+ -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ /* save state for debugging */ -+ cmd_status = acxpci_read_cmd_type_status(adev); -+ -+ /* put the card in IDLE state */ -+ acxpci_write_cmd_type_status(adev, 0, 0); -+ -+ if (!counter) { /* timed out! */ -+ printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. " -+ "irq bits:0x%04X irq_status:0x%04X timeout:%dms " -+ "cmd_status:%d (%s)\n", -+ devname, (adev->irqs_active) ? "waiting" : "polling", -+ irqtype, adev->irq_status, cmd_timeout, -+ cmd_status, acx_cmd_status_str(cmd_status)); -+ goto bad; -+ } else if (cmd_timeout - counter > 30) { /* if waited >30ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. " -+ "count:%d. Please report\n", -+ (adev->irqs_active) ? "waited" : "polled", -+ cmd_timeout - counter, counter); -+ } -+ -+ if (1 != cmd_status) { /* it is not a 'Success' */ -+ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). " -+ "Took %dms of %d\n", -+ devname, cmd_status, acx_cmd_status_str(cmd_status), -+ cmd_timeout - counter, cmd_timeout); -+ /* zero out result buffer -+ * WARNING: this will trash stack in case of illegally large input -+ * length! */ -+ if (buffer && buflen) -+ memset(buffer, 0, buflen); -+ goto bad; -+ } -+ -+ /* read in result parameters if needed */ -+ if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) { -+ /* adev->cmd_area points to PCI device's memory, not to RAM! */ -+ memcpy_fromio(buffer, adev->cmd_area + 4, buflen); -+ if (acx_debug & L_DEBUG) { -+ printk("output buffer (len=%u): ", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ } -+/* ok: */ -+ log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n", -+ cmdstr, jiffies - start); -+ FN_EXIT1(OK); -+ return OK; -+ -+bad: -+ /* Give enough info so that callers can avoid -+ ** printing their own diagnostic messages */ -+#if ACX_DEBUG -+ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); -+#else -+ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); -+#endif -+ dump_stack(); -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+#ifdef NONESSENTIAL_FEATURES -+typedef struct device_id { -+ unsigned char id[6]; -+ char *descr; -+ char *type; -+} device_id_t; -+ -+static const device_id_t -+device_ids[] = -+{ -+ { -+ {'G', 'l', 'o', 'b', 'a', 'l'}, -+ NULL, -+ NULL, -+ }, -+ { -+ {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, -+ "uninitialized", -+ "SpeedStream SS1021 or Gigafast WF721-AEX" -+ }, -+ { -+ {0x80, 0x81, 0x82, 0x83, 0x84, 0x85}, -+ "non-standard", -+ "DrayTek Vigor 520" -+ }, -+ { -+ {'?', '?', '?', '?', '?', '?'}, -+ "non-standard", -+ "Level One WPC-0200" -+ }, -+ { -+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, -+ "empty", -+ "DWL-650+ variant" -+ } -+}; -+ -+static void -+acx_show_card_eeprom_id(acx_device_t *adev) -+{ -+ unsigned char buffer[CARD_EEPROM_ID_SIZE]; -+ int i; -+ -+ memset(&buffer, 0, CARD_EEPROM_ID_SIZE); -+ /* use direct EEPROM access */ -+ for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) { -+ if (OK != acxpci_read_eeprom_byte(adev, -+ ACX100_EEPROM_ID_OFFSET + i, -+ &buffer[i])) { -+ printk("acx: reading EEPROM FAILED\n"); -+ break; -+ } -+ } -+ -+ for (i = 0; i < VEC_SIZE(device_ids); i++) { -+ if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) { -+ if (device_ids[i].descr) { -+ printk("acx: EEPROM card ID string check " -+ "found %s card ID: is this %s?\n", -+ device_ids[i].descr, device_ids[i].type); -+ } -+ break; -+ } -+ } -+ if (i == VEC_SIZE(device_ids)) { -+ printk("acx: EEPROM card ID string check found " -+ "unknown card: expected 'Global', got '%.*s\'. " -+ "Please report\n", CARD_EEPROM_ID_SIZE, buffer); -+ } -+} -+#endif /* NONESSENTIAL_FEATURES */ -+ -+ -+/*********************************************************************** -+** acxpci_free_desc_queues -+** -+** Releases the queues that have been allocated, the -+** others have been initialised to NULL so this -+** function can be used if only part of the queues were allocated. -+*/ -+ -+static inline void -+free_coherent(struct pci_dev *hwdev, size_t size, -+ void *vaddr, dma_addr_t dma_handle) -+{ -+ dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, -+ size, vaddr, dma_handle); -+} -+ -+void -+acxpci_free_desc_queues(acx_device_t *adev) -+{ -+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \ -+ if (ptr) { \ -+ free_coherent(0, size, ptr, phyaddr); \ -+ ptr = NULL; \ -+ size = 0; \ -+ } -+ -+ FN_ENTER; -+ -+ ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy); -+ -+ adev->txdesc_start = NULL; -+ -+ ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy); -+ -+ adev->rxdesc_start = NULL; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_delete_dma_regions -+*/ -+static void -+acxpci_s_delete_dma_regions(acx_device_t *adev) -+{ -+ unsigned long flags; -+ -+ FN_ENTER; -+ /* disable radio Tx/Rx. Shouldn't we use the firmware commands -+ * here instead? Or are we that much down the road that it's no -+ * longer possible here? */ -+ write_reg16(adev, IO_ACX_ENABLE, 0); -+ -+ acx_s_msleep(100); -+ -+ acx_lock(adev, flags); -+ acxpci_free_desc_queues(adev); -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_e_probe -+** -+** Probe routine called when a PCI device w/ matching ID is found. -+** Here's the sequence: -+** - Allocate the PCI resources. -+** - Read the PCMCIA attribute memory to make sure we have a WLAN card -+** - Reset the MAC -+** - Initialize the dev and wlan data -+** - Initialize the MAC -+** -+** pdev - ptr to pci device structure containing info about pci configuration -+** id - ptr to the device id entry that matched this device -+*/ -+static const u16 -+IO_ACX100[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_END_CTL */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x007c, /* IO_ACX_INT_TRIG */ -+ 0x0098, /* IO_ACX_IRQ_MASK */ -+ 0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00ac, /* IO_ACX_IRQ_ACK */ -+ 0x00b0, /* IO_ACX_HINT_TRIG */ -+ -+ 0x0104, /* IO_ACX_ENABLE */ -+ -+ 0x0250, /* IO_ACX_EEPROM_CTL */ -+ 0x0254, /* IO_ACX_EEPROM_ADDR */ -+ 0x0258, /* IO_ACX_EEPROM_DATA */ -+ 0x025c, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0268, /* IO_ACX_PHY_ADDR */ -+ 0x026c, /* IO_ACX_PHY_DATA */ -+ 0x0270, /* IO_ACX_PHY_CTL */ -+ -+ 0x0290, /* IO_ACX_GPIO_OE */ -+ -+ 0x0298, /* IO_ACX_GPIO_OUT */ -+ -+ 0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x02ac, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x02d0, /* IO_ACX_EE_START */ -+ 0x02d4, /* IO_ACX_SOR_CFG */ -+ 0x02d8 /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static const u16 -+IO_ACX111[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_END_CTL */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x00b4, /* IO_ACX_INT_TRIG */ -+ 0x00d4, /* IO_ACX_IRQ_MASK */ -+ /* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */ -+ 0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00e8, /* IO_ACX_IRQ_ACK */ -+ 0x00ec, /* IO_ACX_HINT_TRIG */ -+ -+ 0x01d0, /* IO_ACX_ENABLE */ -+ -+ 0x0338, /* IO_ACX_EEPROM_CTL */ -+ 0x033c, /* IO_ACX_EEPROM_ADDR */ -+ 0x0340, /* IO_ACX_EEPROM_DATA */ -+ 0x0344, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0350, /* IO_ACX_PHY_ADDR */ -+ 0x0354, /* IO_ACX_PHY_DATA */ -+ 0x0358, /* IO_ACX_PHY_CTL */ -+ -+ 0x0374, /* IO_ACX_GPIO_OE */ -+ -+ 0x037c, /* IO_ACX_GPIO_OUT */ -+ -+ 0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x0390, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x0100, /* IO_ACX_EE_START */ -+ 0x0104, /* IO_ACX_SOR_CFG */ -+ 0x0108, /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static void -+dummy_netdev_init(struct net_device *ndev) {} -+ -+static int __devinit -+acxpci_e_probe(struct pci_dev *pdev, const struct pci_device_id *id) -+{ -+ acx111_ie_configoption_t co; -+ unsigned long mem_region1 = 0; -+ unsigned long mem_region2 = 0; -+ unsigned long mem_region1_size; -+ unsigned long mem_region2_size; -+ unsigned long phymem1; -+ unsigned long phymem2; -+ void *mem1 = NULL; -+ void *mem2 = NULL; -+ acx_device_t *adev = NULL; -+ struct net_device *ndev = NULL; -+ const char *chip_name; -+ int result = -EIO; -+ int err; -+ u8 chip_type; -+ -+ FN_ENTER; -+ -+ /* Enable the PCI device */ -+ if (pci_enable_device(pdev)) { -+ printk("acx: pci_enable_device() FAILED\n"); -+ result = -ENODEV; -+ goto fail_pci_enable_device; -+ } -+ -+ /* enable busmastering (required for CardBus) */ -+ pci_set_master(pdev); -+ -+ /* FIXME: prism54 calls pci_set_mwi() here, -+ * should we do/support the same? */ -+ -+ /* chiptype is u8 but id->driver_data is ulong -+ ** Works for now (possible values are 1 and 2) */ -+ chip_type = (u8)id->driver_data; -+ /* acx100 and acx111 have different PCI memory regions */ -+ if (chip_type == CHIPTYPE_ACX100) { -+ chip_name = "ACX100"; -+ mem_region1 = PCI_ACX100_REGION1; -+ mem_region1_size = PCI_ACX100_REGION1_SIZE; -+ -+ mem_region2 = PCI_ACX100_REGION2; -+ mem_region2_size = PCI_ACX100_REGION2_SIZE; -+ } else if (chip_type == CHIPTYPE_ACX111) { -+ chip_name = "ACX111"; -+ mem_region1 = PCI_ACX111_REGION1; -+ mem_region1_size = PCI_ACX111_REGION1_SIZE; -+ -+ mem_region2 = PCI_ACX111_REGION2; -+ mem_region2_size = PCI_ACX111_REGION2_SIZE; -+ } else { -+ printk("acx: unknown chip type 0x%04X\n", chip_type); -+ goto fail_unknown_chiptype; -+ } -+ -+ /* Figure out our resources */ -+ phymem1 = pci_resource_start(pdev, mem_region1); -+ phymem2 = pci_resource_start(pdev, mem_region2); -+ if (!request_mem_region(phymem1, pci_resource_len(pdev, mem_region1), "acx_1")) { -+ printk("acx: cannot reserve PCI memory region 1 (are you sure " -+ "you have CardBus support in kernel?)\n"); -+ goto fail_request_mem_region1; -+ } -+ if (!request_mem_region(phymem2, pci_resource_len(pdev, mem_region2), "acx_2")) { -+ printk("acx: cannot reserve PCI memory region 2\n"); -+ goto fail_request_mem_region2; -+ } -+ -+ /* this used to be ioremap(), but ioremap_nocache() -+ * is much less risky, right? (and slower?) -+ * FIXME: we may want to go back to cached variant if it's -+ * certain that our code really properly handles -+ * cached operation (memory barriers, volatile?, ...) -+ * (but always keep this comment here regardless!) -+ * Possibly make this a driver config setting? */ -+ -+ mem1 = ioremap_nocache(phymem1, mem_region1_size); -+ if (!mem1) { -+ printk("acx: ioremap() FAILED\n"); -+ goto fail_ioremap1; -+ } -+ mem2 = ioremap_nocache(phymem2, mem_region2_size); -+ if (!mem2) { -+ printk("acx: ioremap() #2 FAILED\n"); -+ goto fail_ioremap2; -+ } -+ -+ printk("acx: found %s-based wireless network card at %s, irq:%d, " -+ "phymem1:0x%lX, phymem2:0x%lX, mem1:0x%p, mem1_size:%ld, " -+ "mem2:0x%p, mem2_size:%ld\n", -+ chip_name, pci_name(pdev), pdev->irq, phymem1, phymem2, -+ mem1, mem_region1_size, -+ mem2, mem_region2_size); -+ log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug); -+ -+ if (0 == pdev->irq) { -+ printk("acx: can't use IRQ 0\n"); -+ goto fail_irq; -+ } -+ -+ ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init); -+ /* (NB: memsets to 0 entire area) */ -+ if (!ndev) { -+ printk("acx: no memory for netdevice struct\n"); -+ goto fail_alloc_netdev; -+ } -+ -+ ether_setup(ndev); -+ ndev->open = &acxpci_e_open; -+ ndev->stop = &acxpci_e_close; -+ ndev->hard_start_xmit = &acx_i_start_xmit; -+ ndev->get_stats = &acx_e_get_stats; -+#if IW_HANDLER_VERSION <= 5 -+ ndev->get_wireless_stats = &acx_e_get_wireless_stats; -+#endif -+ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -+ ndev->set_multicast_list = &acxpci_i_set_multicast_list; -+ ndev->tx_timeout = &acxpci_i_tx_timeout; -+ ndev->change_mtu = &acx_e_change_mtu; -+ ndev->watchdog_timeo = 4 * HZ; -+ ndev->irq = pdev->irq; -+ ndev->base_addr = pci_resource_start(pdev, 0); -+ -+ adev = ndev2adev(ndev); -+ spin_lock_init(&adev->lock); /* initial state: unlocked */ -+ /* We do not start with downed sem: we want PARANOID_LOCKING to work */ -+ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ -+ /* since nobody can see new netdev yet, we can as well -+ ** just _presume_ that we're under sem (instead of actually taking it): */ -+ /* acx_sem_lock(adev); */ -+ adev->pdev = pdev; -+ adev->ndev = ndev; -+ adev->dev_type = DEVTYPE_PCI; -+ adev->chip_type = chip_type; -+ adev->chip_name = chip_name; -+ adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111; -+ adev->membase = phymem1; -+ adev->iobase = mem1; -+ adev->membase2 = phymem2; -+ adev->iobase2 = mem2; -+ /* to find crashes due to weird driver access -+ * to unconfigured interface (ifup) */ -+ adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead; -+ -+#ifdef NONESSENTIAL_FEATURES -+ acx_show_card_eeprom_id(adev); -+#endif /* NONESSENTIAL_FEATURES */ -+ -+#ifdef SET_MODULE_OWNER -+ SET_MODULE_OWNER(ndev); -+#endif -+ SET_NETDEV_DEV(ndev, &pdev->dev); -+ -+ log(L_IRQ|L_INIT, "using IRQ %d\n", pdev->irq); -+ -+ /* need to be able to restore PCI state after a suspend */ -+ pci_save_state(pdev); -+ pci_set_drvdata(pdev, ndev); -+ -+ /* ok, pci setup is finished, now start initializing the card */ -+ -+ /* NB: read_reg() reads may return bogus data before reset_dev(), -+ * since the firmware which directly controls large parts of the I/O -+ * registers isn't initialized yet. -+ * acx100 seems to be more affected than acx111 */ -+ if (OK != acxpci_s_reset_dev(adev)) -+ goto fail_reset; -+ -+ if (IS_ACX100(adev)) { -+ /* ACX100: configopt struct in cmd mailbox - directly after reset */ -+ memcpy_fromio(&co, adev->cmd_area, sizeof(co)); -+ } -+ -+ if (OK != acx_s_init_mac(adev)) -+ goto fail_init_mac; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111: configopt struct needs to be queried after full init */ -+ acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS); -+ } -+ -+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */ -+ if (OK != acxpci_read_eeprom_byte(adev, 0x05, &adev->eeprom_version)) -+ goto fail_read_eeprom_version; -+ -+ acx_s_parse_configoption(adev, &co); -+ acx_s_set_defaults(adev); -+ acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */ -+ acx_display_hardware_details(adev); -+ -+ /* Register the card, AFTER everything else has been set up, -+ * since otherwise an ioctl could step on our feet due to -+ * firmware operations happening in parallel or uninitialized data */ -+ err = register_netdev(ndev); -+ if (OK != err) { -+ printk("acx: register_netdev() FAILED: %d\n", err); -+ goto fail_register_netdev; -+ } -+ -+ acx_proc_register_entries(ndev); -+ -+ /* Now we have our device, so make sure the kernel doesn't try -+ * to send packets even though we're not associated to a network yet */ -+ acx_stop_queue(ndev, "on probe"); -+ acx_carrier_off(ndev, "on probe"); -+ -+ /* after register_netdev() userspace may start working with dev -+ * (in particular, on other CPUs), we only need to up the sem */ -+ /* acx_sem_unlock(adev); */ -+ -+ printk("acx "ACX_RELEASE": net device %s, driver compiled " -+ "against wireless extensions %d and Linux %s\n", -+ ndev->name, WIRELESS_EXT, UTS_RELEASE); -+ -+#if CMD_DISCOVERY -+ great_inquisitor(adev); -+#endif -+ -+ result = OK; -+ goto done; -+ -+ /* error paths: undo everything in reverse order... */ -+ -+fail_register_netdev: -+ -+ acxpci_s_delete_dma_regions(adev); -+ pci_set_drvdata(pdev, NULL); -+ -+fail_init_mac: -+fail_read_eeprom_version: -+fail_reset: -+ -+ free_netdev(ndev); -+fail_alloc_netdev: -+fail_irq: -+ -+ iounmap(mem2); -+fail_ioremap2: -+ -+ iounmap(mem1); -+fail_ioremap1: -+ -+ release_mem_region(pci_resource_start(pdev, mem_region2), -+ pci_resource_len(pdev, mem_region2)); -+fail_request_mem_region2: -+ -+ release_mem_region(pci_resource_start(pdev, mem_region1), -+ pci_resource_len(pdev, mem_region1)); -+fail_request_mem_region1: -+fail_unknown_chiptype: -+ -+ pci_disable_device(pdev); -+fail_pci_enable_device: -+ -+ pci_set_power_state(pdev, PCI_D3hot); -+ -+done: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxpci_e_remove -+** -+** Shut device down (if not hot unplugged) -+** and deallocate PCI resources for the acx chip. -+** -+** pdev - ptr to PCI device structure containing info about pci configuration -+*/ -+static void __devexit -+acxpci_e_remove(struct pci_dev *pdev) -+{ -+ struct net_device *ndev; -+ acx_device_t *adev; -+ unsigned long mem_region1, mem_region2; -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ ndev = (struct net_device*) pci_get_drvdata(pdev); -+ if (!ndev) { -+ log(L_DEBUG, "%s: card is unused. Skipping any release code\n", -+ __func__); -+ goto end; -+ } -+ -+ adev = ndev2adev(ndev); -+ -+ /* If device wasn't hot unplugged... */ -+ if (adev_present(adev)) { -+ -+ acx_sem_lock(adev); -+ -+ /* disable both Tx and Rx to shut radio down properly */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); -+ -+#ifdef REDUNDANT -+ /* put the eCPU to sleep to save power -+ * Halting is not possible currently, -+ * since not supported by all firmware versions */ -+ acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0); -+#endif -+ acx_lock(adev, flags); -+ /* disable power LED to save power :-) */ -+ log(L_INIT, "switching off power LED to save power\n"); -+ acxpci_l_power_led(adev, 0); -+ /* stop our eCPU */ -+ if (IS_ACX111(adev)) { -+ /* FIXME: does this actually keep halting the eCPU? -+ * I don't think so... -+ */ -+ acxpci_l_reset_mac(adev); -+ } else { -+ u16 temp; -+ /* halt eCPU */ -+ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; -+ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); -+ write_flush(adev); -+ } -+ acx_unlock(adev, flags); -+ -+ acx_sem_unlock(adev); -+ } -+ -+ /* unregister the device to not let the kernel -+ * (e.g. ioctls) access a half-deconfigured device -+ * NB: this will cause acxpci_e_close() to be called, -+ * thus we shouldn't call it under sem! */ -+ log(L_INIT, "removing device %s\n", ndev->name); -+ unregister_netdev(ndev); -+ -+ /* unregister_netdev ensures that no references to us left. -+ * For paranoid reasons we continue to follow the rules */ -+ acx_sem_lock(adev); -+ -+ if (adev->dev_state_mask & ACX_STATE_IFACE_UP) { -+ acxpci_s_down(ndev); -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ } -+ -+ acx_proc_unregister_entries(ndev); -+ -+ if (IS_ACX100(adev)) { -+ mem_region1 = PCI_ACX100_REGION1; -+ mem_region2 = PCI_ACX100_REGION2; -+ } else { -+ mem_region1 = PCI_ACX111_REGION1; -+ mem_region2 = PCI_ACX111_REGION2; -+ } -+ -+ /* finally, clean up PCI bus state */ -+ acxpci_s_delete_dma_regions(adev); -+ if (adev->iobase) iounmap(adev->iobase); -+ if (adev->iobase2) iounmap(adev->iobase2); -+ release_mem_region(pci_resource_start(pdev, mem_region1), -+ pci_resource_len(pdev, mem_region1)); -+ release_mem_region(pci_resource_start(pdev, mem_region2), -+ pci_resource_len(pdev, mem_region2)); -+ pci_disable_device(pdev); -+ -+ /* remove dev registration */ -+ pci_set_drvdata(pdev, NULL); -+ -+ acx_sem_unlock(adev); -+ -+ /* Free netdev (quite late, -+ * since otherwise we might get caught off-guard -+ * by a netdev timeout handler execution -+ * expecting to see a working dev...) */ -+ free_netdev(ndev); -+ -+ /* put device into ACPI D3 mode (shutdown) */ -+ pci_set_power_state(pdev, PCI_D3hot); -+ -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** TODO: PM code needs to be fixed / debugged / tested. -+*/ -+#ifdef CONFIG_PM -+static int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+acxpci_e_suspend(struct pci_dev *pdev, pm_message_t state) -+#else -+acxpci_e_suspend(struct pci_dev *pdev, u32 state) -+#endif -+{ -+ struct net_device *ndev = pci_get_drvdata(pdev); -+ acx_device_t *adev; -+ -+ FN_ENTER; -+ printk("acx: suspend handler is experimental!\n"); -+ printk("sus: dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ goto end; -+ -+ adev = ndev2adev(ndev); -+ printk("sus: adev %p\n", adev); -+ -+ acx_sem_lock(adev); -+ -+ netif_device_detach(ndev); /* this one cannot sleep */ -+ acxpci_s_down(ndev); -+ /* down() does not set it to 0xffff, but here we really want that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ acxpci_s_delete_dma_regions(adev); -+ pci_save_state(pdev); -+ pci_set_power_state(pdev, PCI_D3hot); -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+static int -+acxpci_e_resume(struct pci_dev *pdev) -+{ -+ struct net_device *ndev = pci_get_drvdata(pdev); -+ acx_device_t *adev; -+ -+ FN_ENTER; -+ -+ printk("acx: resume handler is experimental!\n"); -+ printk("rsm: got dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ goto end; -+ -+ adev = ndev2adev(ndev); -+ printk("rsm: got adev %p\n", adev); -+ -+ acx_sem_lock(adev); -+ -+ pci_set_power_state(pdev, PCI_D0); -+ printk("rsm: power state PCI_D0 set\n"); -+ pci_restore_state(pdev); -+ printk("rsm: PCI state restored\n"); -+ -+ if (OK != acxpci_s_reset_dev(adev)) -+ goto end_unlock; -+ printk("rsm: device reset done\n"); -+ if (OK != acx_s_init_mac(adev)) -+ goto end_unlock; -+ printk("rsm: init MAC done\n"); -+ -+ acxpci_s_up(ndev); -+ printk("rsm: acx up done\n"); -+ -+ /* now even reload all card parameters as they were before suspend, -+ * and possibly be back in the network again already :-) */ -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) { -+ adev->set_mask = GETSET_ALL; -+ acx_s_update_card_settings(adev); -+ printk("rsm: settings updated\n"); -+ } -+ netif_device_attach(ndev); -+ printk("rsm: device attached\n"); -+ -+end_unlock: -+ acx_sem_unlock(adev); -+end: -+ /* we need to return OK here anyway, right? */ -+ FN_EXIT0; -+ return OK; -+} -+#endif /* CONFIG_PM */ -+ -+ -+/*********************************************************************** -+** acxpci_s_up -+** -+** This function is called by acxpci_e_open (when ifconfig sets the device as up) -+** -+** Side effects: -+** - Enables on-card interrupt requests -+** - calls acx_s_start -+*/ -+ -+static void -+enable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask); -+ write_reg16(adev, IO_ACX_FEMR, 0x8000); -+ adev->irqs_active = 1; -+ FN_EXIT0; -+} -+ -+static void -+acxpci_s_up(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ enable_acx_irq(adev); -+ acx_unlock(adev, flags); -+ -+ /* acx fw < 1.9.3.e has a hardware timer, and older drivers -+ ** used to use it. But we don't do that anymore, our OS -+ ** has reliable software timers */ -+ init_timer(&adev->mgmt_timer); -+ adev->mgmt_timer.function = acx_i_timer; -+ adev->mgmt_timer.data = (unsigned long)adev; -+ -+ /* Need to set ACX_STATE_IFACE_UP first, or else -+ ** timer won't be started by acx_set_status() */ -+ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ /* actual scan cmd will happen in start() */ -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); break; -+ case ACX_MODE_3_AP: -+ case ACX_MODE_MONITOR: -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break; -+ } -+ -+ acx_s_start(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_down -+** -+** NB: device may be already hot unplugged if called from acxpci_e_remove() -+** -+** Disables on-card interrupt request, stops softirq and timer, stops queue, -+** sets status == STOPPED -+*/ -+ -+static void -+disable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ -+ /* I guess mask is not 0xffff because acx100 won't signal -+ ** cmd completion then (needed for ifup). -+ ** Someone with acx100 please confirm */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ adev->irqs_active = 0; -+ FN_EXIT0; -+} -+ -+static void -+acxpci_s_down(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ /* Disable IRQs first, so that IRQs cannot race with us */ -+ /* then wait until interrupts have finished executing on other CPUs */ -+ acx_lock(adev, flags); -+ disable_acx_irq(adev); -+ synchronize_irq(adev->pdev->irq); -+ acx_unlock(adev, flags); -+ -+ /* we really don't want to have an asynchronous tasklet disturb us -+ ** after something vital for its job has been shut down, so -+ ** end all remaining work now. -+ ** -+ ** NB: carrier_off (done by set_status below) would lead to -+ ** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK(). -+ ** That's why we do FLUSH first. -+ ** -+ ** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK() -+ ** waits for acx_e_after_interrupt_task to complete if it is running -+ ** on another CPU, but acx_e_after_interrupt_task -+ ** will sleep on sem forever, because it is taken by us! -+ ** Work around that by temporary sem unlock. -+ ** This will fail miserably if we'll be hit by concurrent -+ ** iwconfig or something in between. TODO! */ -+ acx_sem_unlock(adev); -+ FLUSH_SCHEDULED_WORK(); -+ acx_sem_lock(adev); -+ -+ /* This is possible: -+ ** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task -> -+ ** -> set_status(ASSOCIATED) -> wake_queue() -+ ** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK -+ ** lock/unlock is just paranoia, maybe not needed */ -+ acx_lock(adev, flags); -+ acx_stop_queue(ndev, "on ifdown"); -+ acx_set_status(adev, ACX_STATUS_0_STOPPED); -+ acx_unlock(adev, flags); -+ -+ /* kernel/timer.c says it's illegal to del_timer_sync() -+ ** a timer which restarts itself. We guarantee this cannot -+ ** ever happen because acx_i_timer() never does this if -+ ** status is ACX_STATUS_0_STOPPED */ -+ del_timer_sync(&adev->mgmt_timer); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_e_open -+** -+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP -+** from clear to set. In other words: ifconfig up. -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxpci_e_open(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = OK; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ acx_init_task_scheduler(adev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */ -+ -+ /* request shared IRQ handler */ -+ if (request_irq(ndev->irq, acxpci_i_interrupt, SA_SHIRQ, ndev->name, ndev)) { -+ printk("%s: request_irq FAILED\n", ndev->name); -+ result = -EAGAIN; -+ goto done; -+ } -+ log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq); -+ -+ /* ifup device */ -+ acxpci_s_up(ndev); -+ -+ /* We don't currently have to do anything else. -+ * The setup of the MAC should be subsequently completed via -+ * the mlme commands. -+ * Higher layers know we're ready from dev->start==1 and -+ * dev->tbusy==0. Our rx path knows to pass up received/ -+ * frames because of dev->flags&IFF_UP is true. -+ */ -+done: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxpci_e_close -+** -+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP -+** from set to clear. I.e. called by "ifconfig DEV down" -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxpci_e_close(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* ifdown device */ -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ if (netif_device_present(ndev)) { -+ acxpci_s_down(ndev); -+ } -+ -+ /* disable all IRQs, release shared IRQ handler */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ free_irq(ndev->irq, ndev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */ -+ -+ /* We currently don't have to do anything else. -+ * Higher layers know we're not ready from dev->start==0 and -+ * dev->tbusy==1. Our rx path knows to not pass up received -+ * frames because of dev->flags&IFF_UP is false. -+ */ -+ acx_sem_unlock(adev); -+ -+ log(L_INIT, "closed device\n"); -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acxpci_i_tx_timeout -+** -+** Called from network core. Must not sleep! -+*/ -+static void -+acxpci_i_tx_timeout(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ unsigned int tx_num_cleaned; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* clean processed tx descs, they may have been completely full */ -+ tx_num_cleaned = acxpci_l_clean_txdesc(adev); -+ -+ /* nothing cleaned, yet (almost) no free buffers available? -+ * --> clean all tx descs, no matter which status!! -+ * Note that I strongly suspect that doing emergency cleaning -+ * may confuse the firmware. This is a last ditch effort to get -+ * ANYTHING to work again... -+ * -+ * TODO: it's best to simply reset & reinit hw from scratch... -+ */ -+ if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) { -+ printk("%s: FAILED to free any of the many full tx buffers. " -+ "Switching to emergency freeing. " -+ "Please report!\n", ndev->name); -+ acxpci_l_clean_txdesc_emergency(adev); -+ } -+ -+ if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status)) -+ acx_wake_queue(ndev, "after tx timeout"); -+ -+ /* stall may have happened due to radio drift, so recalib radio */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ -+ /* do unimportant work last */ -+ printk("%s: tx timeout!\n", ndev->name); -+ adev->stats.tx_errors++; -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_i_set_multicast_list -+** FIXME: most likely needs refinement -+*/ -+static void -+acxpci_i_set_multicast_list(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* firmwares don't have allmulti capability, -+ * so just use promiscuous mode instead in this case. */ -+ if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) { -+ SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ /* let kernel know in case *we* needed to set promiscuous */ -+ ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI); -+ } else { -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI); -+ } -+ -+ /* cannot update card settings directly here, atomic context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxpci_l_process_rxdesc -+** -+** Called directly and only from the IRQ handler -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_rxbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_rxbuffer(const acx_device_t *adev) -+{ -+ register const struct rxhostdesc *rxhostdesc; -+ int i; -+ /* no FN_ENTER here, we don't want that */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ if (unlikely(!rxhostdesc)) return; -+ for (i = 0; i < RX_CNT; i++) { -+ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) -+ printk("rx: buf %d full\n", i); -+ rxhostdesc++; -+ } -+} -+#endif -+ -+static void -+acxpci_l_process_rxdesc(acx_device_t *adev) -+{ -+ register rxhostdesc_t *hostdesc; -+ unsigned count, tail; -+ -+ FN_ENTER; -+ -+ if (unlikely(acx_debug & L_BUFR)) -+ log_rxbuffer(adev); -+ -+ /* First, have a loop to determine the first descriptor that's -+ * full, just in case there's a mismatch between our current -+ * rx_tail and the full descriptor we're supposed to handle. */ -+ tail = adev->rx_tail; -+ count = RX_CNT; -+ while (1) { -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ /* advance tail regardless of outcome of the below test */ -+ tail = (tail + 1) % RX_CNT; -+ -+ if ((hostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ && (hostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) -+ break; /* found it! */ -+ -+ if (unlikely(!--count)) /* hmm, no luck: all descs empty, bail out */ -+ goto end; -+ } -+ -+ /* now process descriptors, starting with the first we figured out */ -+ while (1) { -+ log(L_BUFR, "rx: tail=%u Ctl_16=%04X Status=%08X\n", -+ tail, hostdesc->Ctl_16, hostdesc->Status); -+ -+ acx_l_process_rxbuf(adev, hostdesc->data); -+ -+ hostdesc->Status = 0; -+ /* flush all writes before adapter sees CTL_HOSTOWN change */ -+ wmb(); -+ /* Host no longer owns this, needs to be LAST */ -+ CLEAR_BIT(hostdesc->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); -+ -+ /* ok, descriptor is handled, now check the next descriptor */ -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ -+ /* if next descriptor is empty, then bail out */ -+ if (!(hostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ || !(hostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) -+ break; -+ -+ tail = (tail + 1) % RX_CNT; -+ } -+end: -+ adev->rx_tail = tail; -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_i_interrupt -+** -+** IRQ handler (atomic context, must not sleep, blah, blah) -+*/ -+ -+/* scan is complete. all frames now on the receive queue are valid */ -+#define INFO_SCAN_COMPLETE 0x0001 -+#define INFO_WEP_KEY_NOT_FOUND 0x0002 -+/* hw has been reset as the result of a watchdog timer timeout */ -+#define INFO_WATCH_DOG_RESET 0x0003 -+/* failed to send out NULL frame from PS mode notification to AP */ -+/* recommended action: try entering 802.11 PS mode again */ -+#define INFO_PS_FAIL 0x0004 -+/* encryption/decryption process on a packet failed */ -+#define INFO_IV_ICV_FAILURE 0x0005 -+ -+/* Info mailbox format: -+2 bytes: type -+2 bytes: status -+more bytes may follow -+ rumors say about status: -+ 0x0000 info available (set by hw) -+ 0x0001 information received (must be set by host) -+ 0x1000 info available, mailbox overflowed (messages lost) (set by hw) -+ but in practice we've seen: -+ 0x9000 when we did not set status to 0x0001 on prev message -+ 0x1001 when we did set it -+ 0x0000 was never seen -+ conclusion: this is really a bitfield: -+ 0x1000 is 'info available' bit -+ 'mailbox overflowed' bit is 0x8000, not 0x1000 -+ value of 0x0000 probably means that there are no messages at all -+ P.S. I dunno how in hell hw is supposed to notice that messages are lost - -+ it does NOT clear bit 0x0001, and this bit will probably stay forever set -+ after we set it once. Let's hope this will be fixed in firmware someday -+*/ -+ -+static void -+handle_info_irq(acx_device_t *adev) -+{ -+#if ACX_DEBUG -+ static const char * const info_type_msg[] = { -+ "(unknown)", -+ "scan complete", -+ "WEP key not found", -+ "internal watchdog reset was done", -+ "failed to send powersave (NULL frame) notification to AP", -+ "encrypt/decrypt on a packet has failed", -+ "TKIP tx keys disabled", -+ "TKIP rx keys disabled", -+ "TKIP rx: key ID not found", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "TKIP IV value exceeds thresh" -+ }; -+#endif -+ u32 info_type, info_status; -+ -+ info_type = readl(adev->info_area); -+ info_status = (info_type >> 16); -+ info_type = (u16)info_type; -+ -+ /* inform fw that we have read this info message */ -+ writel(info_type | 0x00010000, adev->info_area); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK); -+ write_flush(adev); -+ -+ log(L_CTL, "info_type:%04X info_status:%04X\n", -+ info_type, info_status); -+ -+ log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n", -+ info_status, info_type, -+ info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ? -+ 0 : info_type] -+ ); -+} -+ -+ -+static void -+log_unusual_irq(u16 irqtype) { -+ /* -+ if (!printk_ratelimit()) -+ return; -+ */ -+ -+ printk("acx: got"); -+ if (irqtype & HOST_INT_RX_DATA) { -+ printk(" Rx_Data"); -+ } -+ /* HOST_INT_TX_COMPLETE */ -+ if (irqtype & HOST_INT_TX_XFER) { -+ printk(" Tx_Xfer"); -+ } -+ /* HOST_INT_RX_COMPLETE */ -+ if (irqtype & HOST_INT_DTIM) { -+ printk(" DTIM"); -+ } -+ if (irqtype & HOST_INT_BEACON) { -+ printk(" Beacon"); -+ } -+ if (irqtype & HOST_INT_TIMER) { -+ log(L_IRQ, " Timer"); -+ } -+ if (irqtype & HOST_INT_KEY_NOT_FOUND) { -+ printk(" Key_Not_Found"); -+ } -+ if (irqtype & HOST_INT_IV_ICV_FAILURE) { -+ printk(" IV_ICV_Failure (crypto)"); -+ } -+ /* HOST_INT_CMD_COMPLETE */ -+ /* HOST_INT_INFO */ -+ if (irqtype & HOST_INT_OVERFLOW) { -+ printk(" Overflow"); -+ } -+ if (irqtype & HOST_INT_PROCESS_ERROR) { -+ printk(" Process_Error"); -+ } -+ /* HOST_INT_SCAN_COMPLETE */ -+ if (irqtype & HOST_INT_FCS_THRESHOLD) { -+ printk(" FCS_Threshold"); -+ } -+ if (irqtype & HOST_INT_UNKNOWN) { -+ printk(" Unknown"); -+ } -+ printk(" IRQ(s)\n"); -+} -+ -+ -+static void -+update_link_quality_led(acx_device_t *adev) -+{ -+ int qual; -+ -+ qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise); -+ if (qual > adev->brange_max_quality) -+ qual = adev->brange_max_quality; -+ -+ if (time_after(jiffies, adev->brange_time_last_state_change + -+ (HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) { -+ acxpci_l_power_led(adev, (adev->brange_last_state == 0)); -+ adev->brange_last_state ^= 1; /* toggle */ -+ adev->brange_time_last_state_change = jiffies; -+ } -+} -+ -+ -+#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* a la orinoco.c */ -+ -+static irqreturn_t -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+acxpci_i_interrupt(int irq, void *dev_id) -+#else -+acxpci_i_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+#endif -+{ -+ acx_device_t *adev; -+ unsigned long flags; -+ unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY; -+ register u16 irqtype; -+ u16 unmasked; -+ -+ adev = ndev2adev((struct net_device*)dev_id); -+ -+ /* LOCKING: can just spin_lock() since IRQs are disabled anyway. -+ * I am paranoid */ -+ acx_lock(adev, flags); -+ -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ if (unlikely(0xffff == unmasked)) { -+ /* 0xffff value hints at missing hardware, -+ * so don't do anything. -+ * Not very clean, but other drivers do the same... */ -+ log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n"); -+ goto none; -+ } -+ -+ /* We will check only "interesting" IRQ types */ -+ irqtype = unmasked & ~adev->irq_mask; -+ if (!irqtype) { -+ /* We are on a shared IRQ line and it wasn't our IRQ */ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n", -+ unmasked, adev->irq_mask); -+ goto none; -+ } -+ -+ /* Done here because IRQ_NONEs taking three lines of log -+ ** drive me crazy */ -+ FN_ENTER; -+ -+#define IRQ_ITERATE 1 -+#if IRQ_ITERATE -+if (jiffies != adev->irq_last_jiffies) { -+ adev->irq_loops_this_jiffy = 0; -+ adev->irq_last_jiffies = jiffies; -+} -+ -+/* safety condition; we'll normally abort loop below -+ * in case no IRQ type occurred */ -+while (likely(--irqcount)) { -+#endif -+ /* ACK all IRQs ASAP */ -+ write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff); -+ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n", -+ unmasked, adev->irq_mask, irqtype); -+ -+ /* Handle most important IRQ types first */ -+ if (irqtype & HOST_INT_RX_COMPLETE) { -+ log(L_IRQ, "got Rx_Complete IRQ\n"); -+ acxpci_l_process_rxdesc(adev); -+ } -+ if (irqtype & HOST_INT_TX_COMPLETE) { -+ log(L_IRQ, "got Tx_Complete IRQ\n"); -+ /* don't clean up on each Tx complete, wait a bit -+ * unless we're going towards full, in which case -+ * we do it immediately, too (otherwise we might lockup -+ * with a full Tx buffer if we go into -+ * acxpci_l_clean_txdesc() at a time when we won't wakeup -+ * the net queue in there for some reason...) */ -+ if (adev->tx_free <= TX_START_CLEAN) { -+#if TX_CLEANUP_IN_SOFTIRQ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP); -+#else -+ acxpci_l_clean_txdesc(adev); -+#endif -+ } -+ } -+ -+ /* Less frequent ones */ -+ if (irqtype & (0 -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ | HOST_INT_SCAN_COMPLETE -+ )) { -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ log(L_IRQ, "got Command_Complete IRQ\n"); -+ /* save the state for the running issue_cmd() */ -+ SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE); -+ } -+ if (irqtype & HOST_INT_INFO) { -+ handle_info_irq(adev); -+ } -+ if (irqtype & HOST_INT_SCAN_COMPLETE) { -+ log(L_IRQ, "got Scan_Complete IRQ\n"); -+ /* need to do that in process context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN); -+ /* remember that fw is not scanning anymore */ -+ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); -+ } -+ } -+ -+ /* These we just log, but either they happen rarely -+ * or we keep them masked out */ -+ if (irqtype & (0 -+ | HOST_INT_RX_DATA -+ /* | HOST_INT_TX_COMPLETE */ -+ | HOST_INT_TX_XFER -+ /* | HOST_INT_RX_COMPLETE */ -+ | HOST_INT_DTIM -+ | HOST_INT_BEACON -+ | HOST_INT_TIMER -+ | HOST_INT_KEY_NOT_FOUND -+ | HOST_INT_IV_ICV_FAILURE -+ /* | HOST_INT_CMD_COMPLETE */ -+ /* | HOST_INT_INFO */ -+ | HOST_INT_OVERFLOW -+ | HOST_INT_PROCESS_ERROR -+ /* | HOST_INT_SCAN_COMPLETE */ -+ | HOST_INT_FCS_THRESHOLD -+ | HOST_INT_UNKNOWN -+ )) { -+ log_unusual_irq(irqtype); -+ } -+ -+#if IRQ_ITERATE -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ irqtype = unmasked & ~adev->irq_mask; -+ /* Bail out if no new IRQ bits or if all are masked out */ -+ if (!irqtype) -+ break; -+ -+ if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) { -+ printk(KERN_ERR "acx: too many interrupts per jiffy!\n"); -+ /* Looks like card floods us with IRQs! Try to stop that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ /* This will short-circuit all future attempts to handle IRQ. -+ * We cant do much more... */ -+ adev->irq_mask = 0; -+ break; -+ } -+} -+#endif -+ /* Routine to perform blink with range */ -+ if (unlikely(adev->led_power == 2)) -+ update_link_quality_led(adev); -+ -+/* handled: */ -+ /* write_flush(adev); - not needed, last op was read anyway */ -+ acx_unlock(adev, flags); -+ FN_EXIT0; -+ return IRQ_HANDLED; -+ -+none: -+ acx_unlock(adev, flags); -+ return IRQ_NONE; -+} -+ -+ -+/*********************************************************************** -+** acxpci_l_power_led -+*/ -+void -+acxpci_l_power_led(acx_device_t *adev, int enable) -+{ -+ u16 gpio_pled = IS_ACX111(adev) ? 0x0040 : 0x0800; -+ -+ /* A hack. Not moving message rate limiting to adev->xxx -+ * (it's only a debug message after all) */ -+ static int rate_limit = 0; -+ -+ if (rate_limit++ < 3) -+ log(L_IOCTL, "Please report in case toggling the power " -+ "LED doesn't work for your card!\n"); -+ if (enable) -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled); -+ else -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled); -+} -+ -+ -+/*********************************************************************** -+** Ioctls -+*/ -+ -+/*********************************************************************** -+*/ -+int -+acx111pci_ioctl_info( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+#if ACX_DEBUG > 1 -+ acx_device_t *adev = ndev2adev(ndev); -+ rxdesc_t *rxdesc; -+ txdesc_t *txdesc; -+ rxhostdesc_t *rxhostdesc; -+ txhostdesc_t *txhostdesc; -+ struct acx111_ie_memoryconfig memconf; -+ struct acx111_ie_queueconfig queueconf; -+ unsigned long flags; -+ int i; -+ char memmap[0x34]; -+ char rxconfig[0x8]; -+ char fcserror[0x8]; -+ char ratefallback[0x5]; -+ -+ if ( !(acx_debug & (L_IOCTL|L_DEBUG)) ) -+ return OK; -+ /* using printk() since we checked debug flag already */ -+ -+ acx_sem_lock(adev); -+ -+ if (!IS_ACX111(adev)) { -+ printk("acx111-specific function called " -+ "with non-acx111 chip, aborting\n"); -+ goto end_ok; -+ } -+ -+ /* get Acx111 Memory Configuration */ -+ memset(&memconf, 0, sizeof(memconf)); -+ /* BTW, fails with 12 (Write only) error code. -+ ** Retained for easy testing of issue_cmd error handling :) */ -+ acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG); -+ -+ /* get Acx111 Queue Configuration */ -+ memset(&queueconf, 0, sizeof(queueconf)); -+ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); -+ -+ /* get Acx111 Memory Map */ -+ memset(memmap, 0, sizeof(memmap)); -+ acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP); -+ -+ /* get Acx111 Rx Config */ -+ memset(rxconfig, 0, sizeof(rxconfig)); -+ acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG); -+ -+ /* get Acx111 fcs error count */ -+ memset(fcserror, 0, sizeof(fcserror)); -+ acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT); -+ -+ /* get Acx111 rate fallback */ -+ memset(ratefallback, 0, sizeof(ratefallback)); -+ acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK); -+ -+ /* force occurrence of a beacon interrupt */ -+ /* TODO: comment why is this necessary */ -+ write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON); -+ -+ /* dump Acx111 Mem Configuration */ -+ printk("dump mem config:\n" -+ "data read: %d, struct size: %d\n" -+ "Number of stations: %1X\n" -+ "Memory block size: %1X\n" -+ "tx/rx memory block allocation: %1X\n" -+ "count rx: %X / tx: %X queues\n" -+ "options %1X\n" -+ "fragmentation %1X\n" -+ "Rx Queue 1 Count Descriptors: %X\n" -+ "Rx Queue 1 Host Memory Start: %X\n" -+ "Tx Queue 1 Count Descriptors: %X\n" -+ "Tx Queue 1 Attributes: %X\n", -+ memconf.len, (int) sizeof(memconf), -+ memconf.no_of_stations, -+ memconf.memory_block_size, -+ memconf.tx_rx_memory_block_allocation, -+ memconf.count_rx_queues, memconf.count_tx_queues, -+ memconf.options, -+ memconf.fragmentation, -+ memconf.rx_queue1_count_descs, -+ acx2cpu(memconf.rx_queue1_host_rx_start), -+ memconf.tx_queue1_count_descs, -+ memconf.tx_queue1_attributes); -+ -+ /* dump Acx111 Queue Configuration */ -+ printk("dump queue head:\n" -+ "data read: %d, struct size: %d\n" -+ "tx_memory_block_address (from card): %X\n" -+ "rx_memory_block_address (from card): %X\n" -+ "rx1_queue address (from card): %X\n" -+ "tx1_queue address (from card): %X\n" -+ "tx1_queue attributes (from card): %X\n", -+ queueconf.len, (int) sizeof(queueconf), -+ queueconf.tx_memory_block_address, -+ queueconf.rx_memory_block_address, -+ queueconf.rx1_queue_address, -+ queueconf.tx1_queue_address, -+ queueconf.tx1_attributes); -+ -+ /* dump Acx111 Mem Map */ -+ printk("dump mem map:\n" -+ "data read: %d, struct size: %d\n" -+ "Code start: %X\n" -+ "Code end: %X\n" -+ "WEP default key start: %X\n" -+ "WEP default key end: %X\n" -+ "STA table start: %X\n" -+ "STA table end: %X\n" -+ "Packet template start: %X\n" -+ "Packet template end: %X\n" -+ "Queue memory start: %X\n" -+ "Queue memory end: %X\n" -+ "Packet memory pool start: %X\n" -+ "Packet memory pool end: %X\n" -+ "iobase: %p\n" -+ "iobase2: %p\n", -+ *((u16 *)&memmap[0x02]), (int) sizeof(memmap), -+ *((u32 *)&memmap[0x04]), -+ *((u32 *)&memmap[0x08]), -+ *((u32 *)&memmap[0x0C]), -+ *((u32 *)&memmap[0x10]), -+ *((u32 *)&memmap[0x14]), -+ *((u32 *)&memmap[0x18]), -+ *((u32 *)&memmap[0x1C]), -+ *((u32 *)&memmap[0x20]), -+ *((u32 *)&memmap[0x24]), -+ *((u32 *)&memmap[0x28]), -+ *((u32 *)&memmap[0x2C]), -+ *((u32 *)&memmap[0x30]), -+ adev->iobase, -+ adev->iobase2); -+ -+ /* dump Acx111 Rx Config */ -+ printk("dump rx config:\n" -+ "data read: %d, struct size: %d\n" -+ "rx config: %X\n" -+ "rx filter config: %X\n", -+ *((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig), -+ *((u16 *)&rxconfig[0x04]), -+ *((u16 *)&rxconfig[0x06])); -+ -+ /* dump Acx111 fcs error */ -+ printk("dump fcserror:\n" -+ "data read: %d, struct size: %d\n" -+ "fcserrors: %X\n", -+ *((u16 *)&fcserror[0x02]), (int) sizeof(fcserror), -+ *((u32 *)&fcserror[0x04])); -+ -+ /* dump Acx111 rate fallback */ -+ printk("dump rate fallback:\n" -+ "data read: %d, struct size: %d\n" -+ "ratefallback: %X\n", -+ *((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback), -+ *((u8 *)&ratefallback[0x04])); -+ -+ /* protect against IRQ */ -+ acx_lock(adev, flags); -+ -+ /* dump acx111 internal rx descriptor ring buffer */ -+ rxdesc = adev->rxdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump internal rxdesc %d:\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n" -+ "RxStatus (dynamic) 0x%X\n" -+ "Mod/Pre (dynamic) 0x%X\n", -+ i, -+ rxdesc, -+ acx2cpu(rxdesc->pNextDesc), -+ acx2cpu(rxdesc->ACXMemPtr), -+ rxdesc->Ctl_8, -+ rxdesc->rate, -+ rxdesc->error, -+ rxdesc->SNR); -+ rxdesc++; -+ } -+ -+ /* dump host rx descriptor ring buffer */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump host rxdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ rxhostdesc, -+ acx2cpu(rxhostdesc->data_phy), -+ rxhostdesc->data_offset, -+ le16_to_cpu(rxhostdesc->Ctl_16), -+ le16_to_cpu(rxhostdesc->length), -+ acx2cpu(rxhostdesc->desc_phy_next), -+ rxhostdesc->Status); -+ rxhostdesc++; -+ } -+ -+ /* dump acx111 internal tx descriptor ring buffer */ -+ txdesc = adev->txdesc_start; -+ -+ /* loop over complete transmit pool */ -+ if (txdesc) for (i = 0; i < TX_CNT; i++) { -+ printk("\ndump internal txdesc %d:\n" -+ "size 0x%X\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "host mem pointer (dynamic) 0x%X\n" -+ "length (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "CTL2 (dynamic) 0x%X\n" -+ "Status (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n", -+ i, -+ (int) sizeof(struct txdesc), -+ txdesc, -+ acx2cpu(txdesc->pNextDesc), -+ acx2cpu(txdesc->AcxMemPtr), -+ acx2cpu(txdesc->HostMemPtr), -+ le16_to_cpu(txdesc->total_length), -+ txdesc->Ctl_8, -+ txdesc->Ctl2_8, txdesc->error, -+ txdesc->u.r1.rate); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ -+ /* dump host tx descriptor ring buffer */ -+ -+ txhostdesc = adev->txhostdesc_start; -+ -+ /* loop over complete host send pool */ -+ if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) { -+ printk("\ndump host txdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ txhostdesc, -+ acx2cpu(txhostdesc->data_phy), -+ txhostdesc->data_offset, -+ le16_to_cpu(txhostdesc->Ctl_16), -+ le16_to_cpu(txhostdesc->length), -+ acx2cpu(txhostdesc->desc_phy_next), -+ le32_to_cpu(txhostdesc->Status)); -+ txhostdesc++; -+ } -+ -+ /* write_reg16(adev, 0xb4, 0x4); */ -+ -+ acx_unlock(adev, flags); -+end_ok: -+ -+ acx_sem_unlock(adev); -+#endif /* ACX_DEBUG */ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100pci_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ u16 gpio_old; -+ -+ if (!IS_ACX100(adev)) { -+ /* WARNING!!! -+ * Removing this check *might* damage -+ * hardware, since we're tweaking GPIOs here after all!!! -+ * You've been warned... -+ * WARNING!!! */ -+ printk("acx: sorry, setting bias level for non-acx100 " -+ "is not supported yet\n"); -+ return OK; -+ } -+ -+ if (*extra > 7) { -+ printk("acx: invalid bias parameter, range is 0-7\n"); -+ return -EINVAL; -+ } -+ -+ acx_sem_lock(adev); -+ -+ /* Need to lock accesses to [IO_ACX_GPIO_OUT]: -+ * IRQ handler uses it to update LED */ -+ acx_lock(adev, flags); -+ gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT); -+ write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8)); -+ acx_unlock(adev, flags); -+ -+ log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old); -+ printk("%s: PHY power amplifier bias: old:%d, new:%d\n", -+ ndev->name, -+ (gpio_old & 0x0700) >> 8, (unsigned char)*extra); -+ -+ acx_sem_unlock(adev); -+ -+ return OK; -+} -+ -+ -+/*************************************************************** -+** acxpci_l_alloc_tx -+** Actually returns a txdesc_t* ptr -+** -+** FIXME: in case of fragments, should allocate multiple descrs -+** after figuring out how many we need and whether we still have -+** sufficiently many. -+*/ -+tx_t* -+acxpci_l_alloc_tx(acx_device_t *adev) -+{ -+ struct txdesc *txdesc; -+ unsigned head; -+ u8 ctl8; -+ -+ FN_ENTER; -+ -+ if (unlikely(!adev->tx_free)) { -+ printk("acx: BUG: no free txdesc left\n"); -+ txdesc = NULL; -+ goto end; -+ } -+ -+ head = adev->tx_head; -+ txdesc = get_txdesc(adev, head); -+ ctl8 = txdesc->Ctl_8; -+ -+ /* 2005-10-11: there were several bug reports on this happening -+ ** but now cause seems to be understood & fixed */ -+ if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_ACXDONE_HOSTOWN))) { -+ /* whoops, descr at current index is not free, so probably -+ * ring buffer already full */ -+ printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find " -+ "free txdesc\n", head, ctl8); -+ txdesc = NULL; -+ goto end; -+ } -+ -+ /* Needed in case txdesc won't be eventually submitted for tx */ -+ txdesc->Ctl_8 = DESC_CTL_ACXDONE_HOSTOWN; -+ -+ adev->tx_free--; -+ log(L_BUFT, "tx: got desc %u, %u remain\n", -+ head, adev->tx_free); -+ /* Keep a few free descs between head and tail of tx ring. -+ ** It is not absolutely needed, just feels safer */ -+ if (adev->tx_free < TX_STOP_QUEUE) { -+ log(L_BUF, "stop queue (%u tx desc left)\n", -+ adev->tx_free); -+ acx_stop_queue(adev->ndev, NULL); -+ } -+ -+ /* returning current descriptor, so advance to next free one */ -+ adev->tx_head = (head + 1) % TX_CNT; -+end: -+ FN_EXIT0; -+ -+ return (tx_t*)txdesc; -+} -+ -+ -+/*********************************************************************** -+*/ -+void* -+acxpci_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) -+{ -+ return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data; -+} -+ -+ -+/*********************************************************************** -+** acxpci_l_tx_data -+** -+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). -+** Can be called from acx_i_start_xmit (data frames from net core). -+** -+** FIXME: in case of fragments, should loop over the number of -+** pre-allocated tx descrs, properly setting up transfer data and -+** CTL_xxx flags according to fragment number. -+*/ -+void -+acxpci_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len) -+{ -+ txdesc_t *txdesc = (txdesc_t*)tx_opaque; -+ txhostdesc_t *hostdesc1, *hostdesc2; -+ client_t *clt; -+ u16 rate_cur; -+ u8 Ctl_8, Ctl2_8; -+ -+ FN_ENTER; -+ -+ /* fw doesn't tx such packets anyhow */ -+ if (unlikely(len < WLAN_HDR_A3_LEN)) -+ goto end; -+ -+ hostdesc1 = get_txhostdesc(adev, txdesc); -+ /* modify flag status in separate variable to be able to write it back -+ * in one big swoop later (also in order to have less device memory -+ * accesses) */ -+ Ctl_8 = txdesc->Ctl_8; -+ Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */ -+ -+ hostdesc2 = hostdesc1 + 1; -+ -+ /* DON'T simply set Ctl field to 0 here globally, -+ * it needs to maintain a consistent flag status (those are state flags!!), -+ * otherwise it may lead to severe disruption. Only set or reset particular -+ * flags at the exact moment this is needed... */ -+ -+ /* let chip do RTS/CTS handshaking before sending -+ * in case packet size exceeds threshold */ -+ if (len > adev->rts_threshold) -+ SET_BIT(Ctl2_8, DESC_CTL2_RTS); -+ else -+ CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS); -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1); -+ break; -+ case ACX_MODE_2_STA: -+ clt = adev->ap_client; -+ break; -+#if 0 -+/* testing was done on acx111: */ -+ case ACX_MODE_MONITOR: -+ SET_BIT(Ctl2_8, 0 -+/* sends CTS to self before packet */ -+ + DESC_CTL2_SEQ /* don't increase sequence field */ -+/* not working (looks like good fcs is still added) */ -+ + DESC_CTL2_FCS /* don't add the FCS */ -+/* not tested */ -+ + DESC_CTL2_MORE_FRAG -+/* not tested */ -+ + DESC_CTL2_RETRY /* don't increase retry field */ -+/* not tested */ -+ + DESC_CTL2_POWER /* don't increase power mgmt. field */ -+/* no effect */ -+ + DESC_CTL2_WEP /* encrypt this frame */ -+/* not tested */ -+ + DESC_CTL2_DUR /* don't increase duration field */ -+ ); -+ /* fallthrough */ -+#endif -+ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ -+ clt = NULL; -+ break; -+ } -+ -+ rate_cur = clt ? clt->rate_cur : adev->rate_bcast; -+ if (unlikely(!rate_cur)) { -+ printk("acx: driver bug! bad ratemask\n"); -+ goto end; -+ } -+ -+ /* used in tx cleanup routine for auto rate and accounting: */ -+ put_txcr(adev, txdesc, clt, rate_cur); -+ -+ txdesc->total_length = cpu_to_le16(len); -+ hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN); -+ if (IS_ACX111(adev)) { -+ /* note that if !txdesc->do_auto, txrate->cur -+ ** has only one nonzero bit */ -+ txdesc->u.r2.rate111 = cpu_to_le16( -+ rate_cur -+ /* WARNING: I was never able to make it work with prism54 AP. -+ ** It was falling down to 1Mbit where shortpre is not applicable, -+ ** and not working at all at "5,11 basic rates only" setting. -+ ** I even didn't see tx packets in radio packet capture. -+ ** Disabled for now --vda */ -+ /*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */ -+ ); -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ /* should add this to rate111 above as necessary */ -+ | (clt->pbcc511 ? RATE111_PBCC511 : 0) -+#endif -+ hostdesc1->length = cpu_to_le16(len); -+ } else { /* ACX100 */ -+ u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100; -+ txdesc->u.r1.rate = rate_100; -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ if (clt->pbcc511) { -+ if (n == RATE100_5 || n == RATE100_11) -+ n |= RATE100_PBCC511; -+ } -+ -+ if (clt->shortpre && (clt->cur != RATE111_1)) -+ SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */ -+#endif -+ /* set autodma and reclaim and 1st mpdu */ -+ SET_BIT(Ctl_8, DESC_CTL_AUTODMA | DESC_CTL_RECLAIM | DESC_CTL_FIRSTFRAG); -+#if ACX_FRAGMENTATION -+ /* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */ -+#endif -+ hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN); -+ } -+ /* don't need to clean ack/rts statistics here, already -+ * done on descr cleanup */ -+ -+ /* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors -+ * are now owned by the acx100; do this as LAST operation */ -+ CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN); -+ /* flush writes before we release hostdesc to the adapter here */ -+ wmb(); -+ CLEAR_BIT(hostdesc1->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); -+ CLEAR_BIT(hostdesc2->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); -+ -+ /* write back modified flags */ -+ txdesc->Ctl2_8 = Ctl2_8; -+ txdesc->Ctl_8 = Ctl_8; -+ /* unused: txdesc->tx_time = cpu_to_le32(jiffies); */ -+ -+ /* flush writes before we tell the adapter that it's its turn now */ -+ mmiowb(); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); -+ write_flush(adev); -+ -+ /* log the packet content AFTER sending it, -+ * in order to not delay sending any further than absolutely needed -+ * Do separate logs for acx100/111 to have human-readable rates */ -+ if (unlikely(acx_debug & (L_XFER|L_DATA))) { -+ u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc; -+ if (IS_ACX111(adev)) -+ printk("tx: pkt (%s): len %d " -+ "rate %04X%s status %u\n", -+ acx_get_packet_type_string(le16_to_cpu(fc)), len, -+ le16_to_cpu(txdesc->u.r2.rate111), -+ (le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "", -+ adev->status); -+ else -+ printk("tx: pkt (%s): len %d rate %03u%s status %u\n", -+ acx_get_packet_type_string(fc), len, -+ txdesc->u.r1.rate, -+ (Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "", -+ adev->status); -+ -+ if (acx_debug & L_DATA) { -+ printk("tx: 802.11 [%d]: ", len); -+ acx_dump_bytes(hostdesc1->data, len); -+ } -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_l_clean_txdesc -+** -+** This function resets the txdescs' status when the ACX100 -+** signals the TX done IRQ (txdescs have been processed), starting with -+** the pool index of the descriptor which we would use next, -+** in order to make sure that we can be as fast as possible -+** in filling new txdescs. -+** Everytime we get called we know where the next packet to be cleaned is. -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_txbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_txbuffer(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ -+ /* no FN_ENTER here, we don't want that */ -+ /* no locks here, since it's entirely non-critical code */ -+ txdesc = adev->txdesc_start; -+ if (unlikely(!txdesc)) return; -+ printk("tx: desc->Ctl8's:"); -+ for (i = 0; i < TX_CNT; i++) { -+ printk(" %02X", txdesc->Ctl_8); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ printk("\n"); -+} -+#endif -+ -+ -+static void -+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger) -+{ -+ const char *err = "unknown error"; -+ -+ /* hmm, should we handle this as a mask -+ * of *several* bits? -+ * For now I think only caring about -+ * individual bits is ok... */ -+ switch (error) { -+ case 0x01: -+ err = "no Tx due to error in other fragment"; -+ adev->wstats.discard.fragment++; -+ break; -+ case 0x02: -+ err = "Tx aborted"; -+ adev->stats.tx_aborted_errors++; -+ break; -+ case 0x04: -+ err = "Tx desc wrong parameters"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x08: -+ err = "WEP key not found"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x10: -+ err = "MSDU lifetime timeout? - try changing " -+ "'iwconfig retry lifetime XXX'"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x20: -+ err = "excessive Tx retries due to either distance " -+ "too high or unable to Tx or Tx frame error - " -+ "try changing 'iwconfig txpower XXX' or " -+ "'sens'itivity or 'retry'"; -+ adev->wstats.discard.retries++; -+ /* Tx error 0x20 also seems to occur on -+ * overheating, so I'm not sure whether we -+ * actually want to do aggressive radio recalibration, -+ * since people maybe won't notice then that their hardware -+ * is slowly getting cooked... -+ * Or is it still a safe long distance from utter -+ * radio non-functionality despite many radio recalibs -+ * to final destructive overheating of the hardware? -+ * In this case we really should do recalib here... -+ * I guess the only way to find out is to do a -+ * potentially fatal self-experiment :-\ -+ * Or maybe only recalib in case we're using Tx -+ * rate auto (on errors switching to lower speed -+ * --> less heat?) or 802.11 power save mode? -+ * -+ * ok, just do it. */ -+ if (++adev->retry_errors_msg_ratelimit % 4 == 0) { -+ if (adev->retry_errors_msg_ratelimit <= 20) { -+ printk("%s: several excessive Tx " -+ "retry errors occurred, attempting " -+ "to recalibrate radio. Radio " -+ "drift might be caused by increasing " -+ "card temperature, please check the card " -+ "before it's too late!\n", -+ adev->ndev->name); -+ if (adev->retry_errors_msg_ratelimit == 20) -+ printk("disabling above message\n"); -+ } -+ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ } -+ break; -+ case 0x40: -+ err = "Tx buffer overflow"; -+ adev->stats.tx_fifo_errors++; -+ break; -+ case 0x80: -+ /* possibly ACPI C-state powersaving related!!! -+ * (DMA timeout due to excessively high wakeup -+ * latency after C-state activation!?) -+ * Disable C-State powersaving and try again, -+ * then PLEASE REPORT, I'm VERY interested in -+ * whether my theory is correct that this is -+ * actually the problem here. -+ * In that case, use new Linux idle wakeup latency -+ * requirements kernel API to prevent this issue. */ -+ err = "DMA error"; -+ adev->wstats.discard.misc++; -+ break; -+ } -+ adev->stats.tx_errors++; -+ if (adev->stats.tx_errors <= 20) -+ printk("%s: tx error 0x%02X, buf %02u! (%s)\n", -+ adev->ndev->name, error, finger, err); -+ else -+ printk("%s: tx error 0x%02X, buf %02u!\n", -+ adev->ndev->name, error, finger); -+} -+ -+ -+unsigned int -+acxpci_l_clean_txdesc(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ unsigned finger; -+ int num_cleaned; -+ u16 r111; -+ u8 error, ack_failures, rts_failures, rts_ok, r100; -+ -+ FN_ENTER; -+ -+ if (unlikely(acx_debug & L_DEBUG)) -+ log_txbuffer(adev); -+ -+ log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail); -+ -+ /* We know first descr which is not free yet. We advance it as far -+ ** as we see correct bits set in following descs (if next desc -+ ** is NOT free, we shouldn't advance at all). We know that in -+ ** front of tx_tail may be "holes" with isolated free descs. -+ ** We will catch up when all intermediate descs will be freed also */ -+ -+ finger = adev->tx_tail; -+ num_cleaned = 0; -+ while (likely(finger != adev->tx_head)) { -+ txdesc = get_txdesc(adev, finger); -+ -+ /* If we allocated txdesc on tx path but then decided -+ ** to NOT use it, then it will be left as a free "bubble" -+ ** in the "allocated for tx" part of the ring. -+ ** We may meet it on the next ring pass here. */ -+ -+ /* stop if not marked as "tx finished" and "host owned" */ -+ if ((txdesc->Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN) -+ != DESC_CTL_ACXDONE_HOSTOWN) { -+ if (unlikely(!num_cleaned)) { /* maybe remove completely */ -+ log(L_BUFT, "clean_txdesc: tail isn't free. " -+ "tail:%d head:%d\n", -+ adev->tx_tail, adev->tx_head); -+ } -+ break; -+ } -+ -+ /* remember desc values... */ -+ error = txdesc->error; -+ ack_failures = txdesc->ack_failures; -+ rts_failures = txdesc->rts_failures; -+ rts_ok = txdesc->rts_ok; -+ r100 = txdesc->u.r1.rate; -+ r111 = le16_to_cpu(txdesc->u.r2.rate111); -+ -+ /* need to check for certain error conditions before we -+ * clean the descriptor: we still need valid descr data here */ -+ if (unlikely(0x30 & error)) { -+ /* only send IWEVTXDROP in case of retry or lifetime exceeded; -+ * all other errors mean we screwed up locally */ -+ union iwreq_data wrqu; -+ wlan_hdr_t *hdr; -+ txhostdesc_t *hostdesc; -+ -+ hostdesc = get_txhostdesc(adev, txdesc); -+ hdr = (wlan_hdr_t *)hostdesc->data; -+ MAC_COPY(wrqu.addr.sa_data, hdr->a1); -+ wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL); -+ } -+ -+ /* ...and free the desc */ -+ txdesc->error = 0; -+ txdesc->ack_failures = 0; -+ txdesc->rts_failures = 0; -+ txdesc->rts_ok = 0; -+ /* signal host owning it LAST, since ACX already knows that this -+ ** descriptor is finished since it set Ctl_8 accordingly. */ -+ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; -+ -+ adev->tx_free++; -+ num_cleaned++; -+ -+ if ((adev->tx_free >= TX_START_QUEUE) -+ && (adev->status == ACX_STATUS_4_ASSOCIATED) -+ && (acx_queue_stopped(adev->ndev)) -+ ) { -+ log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n", -+ adev->tx_free); -+ acx_wake_queue(adev->ndev, NULL); -+ } -+ -+ /* do error checking, rate handling and logging -+ * AFTER having done the work, it's faster */ -+ -+ /* do rate handling */ -+ if (adev->rate_auto) { -+ struct client *clt = get_txc(adev, txdesc); -+ if (clt) { -+ u16 cur = get_txr(adev, txdesc); -+ if (clt->rate_cur == cur) { -+ acx_l_handle_txrate_auto(adev, clt, -+ cur, /* intended rate */ -+ r100, r111, /* actually used rate */ -+ (error & 0x30), /* was there an error? */ -+ TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free); -+ } -+ } -+ } -+ -+ if (unlikely(error)) -+ handle_tx_error(adev, error, finger); -+ -+ if (IS_ACX111(adev)) -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n", -+ finger, ack_failures, rts_failures, rts_ok, r111); -+ else -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n", -+ finger, ack_failures, rts_failures, rts_ok, r100); -+ -+ /* update pointer for descr to be cleaned next */ -+ finger = (finger + 1) % TX_CNT; -+ } -+ -+ /* remember last position */ -+ adev->tx_tail = finger; -+/* end: */ -+ FN_EXIT1(num_cleaned); -+ return num_cleaned; -+} -+ -+/* clean *all* Tx descriptors, and regardless of their previous state. -+ * Used for brute-force reset handling. */ -+void -+acxpci_l_clean_txdesc_emergency(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc = get_txdesc(adev, i); -+ -+ /* free it */ -+ txdesc->ack_failures = 0; -+ txdesc->rts_failures = 0; -+ txdesc->rts_ok = 0; -+ txdesc->error = 0; -+ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; -+ } -+ -+ adev->tx_free = TX_CNT; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_create_tx_host_desc_queue -+*/ -+ -+static void* -+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg) -+{ -+ void *ptr; -+ -+ ptr = dma_alloc_coherent(adev->pdev ? &adev->pdev->dev : NULL, -+ size, phy, GFP_KERNEL); -+ -+ if (ptr) { -+ log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n", -+ msg, (int)size, ptr, (unsigned long long)*phy); -+ memset(ptr, 0, size); -+ return ptr; -+ } -+ printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n", -+ msg, (int)size); -+ return NULL; -+} -+ -+ -+static int -+acxpci_s_create_tx_host_desc_queue(acx_device_t *adev) -+{ -+ txhostdesc_t *hostdesc; -+ u8 *txbuf; -+ dma_addr_t hostdesc_phy; -+ dma_addr_t txbuf_phy; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate TX buffer */ -+ adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS; -+ adev->txbuf_start = allocate(adev, adev->txbuf_area_size, -+ &adev->txbuf_startphy, "txbuf_start"); -+ if (!adev->txbuf_start) -+ goto fail; -+ -+ /* allocate the TX host descriptor queue pool */ -+ adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc); -+ adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size, -+ &adev->txhostdesc_startphy, "txhostdesc_start"); -+ if (!adev->txhostdesc_start) -+ goto fail; -+ /* check for proper alignment of TX host descriptor pool */ -+ if ((long) adev->txhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ hostdesc = adev->txhostdesc_start; -+ hostdesc_phy = adev->txhostdesc_startphy; -+ txbuf = adev->txbuf_start; -+ txbuf_phy = adev->txbuf_startphy; -+ -+#if 0 -+/* Each tx buffer is accessed by hardware via -+** txdesc -> txhostdesc(s) -> txbuffer(s). -+** We use only one txhostdesc per txdesc, but it looks like -+** acx111 is buggy: it accesses second txhostdesc -+** (via hostdesc.desc_phy_next field) even if -+** txdesc->length == hostdesc->length and thus -+** entire packet was placed into first txhostdesc. -+** Due to this bug acx111 hangs unless second txhostdesc -+** has le16_to_cpu(hostdesc.length) = 3 (or larger) -+** Storing NULL into hostdesc.desc_phy_next -+** doesn't seem to help. -+** -+** Update: although it worked on Xterasys XN-2522g -+** with len=3 trick, WG311v2 is even more bogus, doesn't work. -+** Keeping this code (#ifdef'ed out) for documentational purposes. -+*/ -+ for (i = 0; i < TX_CNT*2; i++) { -+ hostdesc_phy += sizeof(*hostdesc); -+ if (!(i & 1)) { -+ hostdesc->data_phy = cpu2acx(txbuf_phy); -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); -+ /* hostdesc->length = ... */ -+ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); -+ hostdesc->pNext = ptr2acx(NULL); -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ hostdesc->data = txbuf; -+ -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS; -+ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS; -+ } else { -+ /* hostdesc->data_phy = ... */ -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ /* hostdesc->Ctl_16 = ... */ -+ hostdesc->length = cpu_to_le16(3); /* bug workaround */ -+ /* hostdesc->desc_phy_next = ... */ -+ /* hostdesc->pNext = ... */ -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ /* hostdesc->data = ... */ -+ } -+ hostdesc++; -+ } -+#endif -+/* We initialize two hostdescs so that they point to adjacent -+** memory areas. Thus txbuf is really just a contiguous memory area */ -+ for (i = 0; i < TX_CNT*2; i++) { -+ hostdesc_phy += sizeof(*hostdesc); -+ -+ hostdesc->data_phy = cpu2acx(txbuf_phy); -+ /* done by memset(0): hostdesc->data_offset = 0; */ -+ /* hostdesc->reserved = ... */ -+ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); -+ /* hostdesc->length = ... */ -+ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); -+ /* done by memset(0): hostdesc->pNext = ptr2acx(NULL); */ -+ /* hostdesc->Status = ... */ -+ /* ->data is a non-hardware field: */ -+ hostdesc->data = txbuf; -+ -+ if (!(i & 1)) { -+ txbuf += WLAN_HDR_A3_LEN; -+ txbuf_phy += WLAN_HDR_A3_LEN; -+ } else { -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; -+ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; -+ } -+ hostdesc++; -+ } -+ hostdesc--; -+ hostdesc->desc_phy_next = cpu2acx(adev->txhostdesc_startphy); -+ -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_tx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxpci_s_create_rx_host_desc_queue -+*/ -+/* the whole size of a data buffer (header plus data body) -+ * plus 32 bytes safety offset at the end */ -+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32) -+ -+static int -+acxpci_s_create_rx_host_desc_queue(acx_device_t *adev) -+{ -+ rxhostdesc_t *hostdesc; -+ rxbuffer_t *rxbuf; -+ dma_addr_t hostdesc_phy; -+ dma_addr_t rxbuf_phy; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate the RX host descriptor queue pool */ -+ adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc); -+ adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size, -+ &adev->rxhostdesc_startphy, "rxhostdesc_start"); -+ if (!adev->rxhostdesc_start) -+ goto fail; -+ /* check for proper alignment of RX host descriptor pool */ -+ if ((long) adev->rxhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ /* allocate Rx buffer pool which will be used by the acx -+ * to store the whole content of the received frames in it */ -+ adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE; -+ adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size, -+ &adev->rxbuf_startphy, "rxbuf_start"); -+ if (!adev->rxbuf_start) -+ goto fail; -+ -+ rxbuf = adev->rxbuf_start; -+ rxbuf_phy = adev->rxbuf_startphy; -+ hostdesc = adev->rxhostdesc_start; -+ hostdesc_phy = adev->rxhostdesc_startphy; -+ -+ /* don't make any popular C programming pointer arithmetic mistakes -+ * here, otherwise I'll kill you... -+ * (and don't dare asking me why I'm warning you about that...) */ -+ for (i = 0; i < RX_CNT; i++) { -+ hostdesc->data = rxbuf; -+ hostdesc->data_phy = cpu2acx(rxbuf_phy); -+ hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE); -+ CLEAR_BIT(hostdesc->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); -+ rxbuf++; -+ rxbuf_phy += sizeof(*rxbuf); -+ hostdesc_phy += sizeof(*hostdesc); -+ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); -+ hostdesc++; -+ } -+ hostdesc--; -+ hostdesc->desc_phy_next = cpu2acx(adev->rxhostdesc_startphy); -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_rx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxpci_s_create_hostdesc_queues -+*/ -+int -+acxpci_s_create_hostdesc_queues(acx_device_t *adev) -+{ -+ int result; -+ result = acxpci_s_create_tx_host_desc_queue(adev); -+ if (OK != result) return result; -+ result = acxpci_s_create_rx_host_desc_queue(adev); -+ return result; -+} -+ -+ -+/*************************************************************** -+** acxpci_create_tx_desc_queue -+*/ -+static void -+acxpci_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start) -+{ -+ txdesc_t *txdesc; -+ txhostdesc_t *hostdesc; -+ dma_addr_t hostmemptr; -+ u32 mem_offs; -+ int i; -+ -+ FN_ENTER; -+ -+ if (IS_ACX100(adev)) -+ adev->txdesc_size = sizeof(*txdesc); -+ else -+ /* the acx111 txdesc is 4 bytes larger */ -+ adev->txdesc_size = sizeof(*txdesc) + 4; -+ -+ adev->txdesc_start = (txdesc_t *) (adev->iobase2 + tx_queue_start); -+ -+ log(L_DEBUG, "adev->iobase2=%p\n" -+ "tx_queue_start=%08X\n" -+ "adev->txdesc_start=%p\n", -+ adev->iobase2, -+ tx_queue_start, -+ adev->txdesc_start); -+ -+ adev->tx_free = TX_CNT; -+ /* done by memset: adev->tx_head = 0; */ -+ /* done by memset: adev->tx_tail = 0; */ -+ txdesc = adev->txdesc_start; -+ mem_offs = tx_queue_start; -+ hostmemptr = adev->txhostdesc_startphy; -+ hostdesc = adev->txhostdesc_start; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111 has a preinitialized Tx buffer! */ -+ /* loop over whole send pool */ -+ /* FIXME: do we have to do the hostmemptr stuff here?? */ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc->HostMemPtr = ptr2acx(hostmemptr); -+ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; -+ /* reserve two (hdr desc and payload desc) */ -+ hostdesc += 2; -+ hostmemptr += 2 * sizeof(*hostdesc); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ } else { -+ /* ACX100 Tx buffer needs to be initialized by us */ -+ /* clear whole send pool. sizeof is safe here (we are acx100) */ -+ memset(adev->txdesc_start, 0, TX_CNT * sizeof(*txdesc)); -+ -+ /* loop over whole send pool */ -+ for (i = 0; i < TX_CNT; i++) { -+ log(L_DEBUG, "configure card tx descriptor: 0x%p, " -+ "size: 0x%X\n", txdesc, adev->txdesc_size); -+ -+ /* pointer to hostdesc memory */ -+ txdesc->HostMemPtr = ptr2acx(hostmemptr); -+ /* initialise ctl */ -+ txdesc->Ctl_8 = ( DESC_CTL_HOSTOWN | DESC_CTL_RECLAIM -+ | DESC_CTL_AUTODMA | DESC_CTL_FIRSTFRAG); -+ /* done by memset(0): txdesc->Ctl2_8 = 0; */ -+ /* point to next txdesc */ -+ txdesc->pNextDesc = cpu2acx(mem_offs + adev->txdesc_size); -+ /* reserve two (hdr desc and payload desc) */ -+ hostdesc += 2; -+ hostmemptr += 2 * sizeof(*hostdesc); -+ /* go to the next one */ -+ mem_offs += adev->txdesc_size; -+ /* ++ is safe here (we are acx100) */ -+ txdesc++; -+ } -+ /* go back to the last one */ -+ txdesc--; -+ /* and point to the first making it a ring buffer */ -+ txdesc->pNextDesc = cpu2acx(tx_queue_start); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxpci_create_rx_desc_queue -+*/ -+static void -+acxpci_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start) -+{ -+ rxdesc_t *rxdesc; -+ u32 mem_offs; -+ int i; -+ -+ FN_ENTER; -+ -+ /* done by memset: adev->rx_tail = 0; */ -+ -+ /* ACX111 doesn't need any further config: preconfigures itself. -+ * Simply print ring buffer for debugging */ -+ if (IS_ACX111(adev)) { -+ /* rxdesc_start already set here */ -+ -+ adev->rxdesc_start = (rxdesc_t *) ((u8 *)adev->iobase2 + rx_queue_start); -+ -+ rxdesc = adev->rxdesc_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc); -+ rxdesc = adev->rxdesc_start = (rxdesc_t *) -+ (adev->iobase2 + acx2cpu(rxdesc->pNextDesc)); -+ } -+ } else { -+ /* we didn't pre-calculate rxdesc_start in case of ACX100 */ -+ /* rxdesc_start should be right AFTER Tx pool */ -+ adev->rxdesc_start = (rxdesc_t *) -+ ((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t))); -+ /* NB: sizeof(txdesc_t) above is valid because we know -+ ** we are in if (acx100) block. Beware of cut-n-pasting elsewhere! -+ ** acx111's txdesc is larger! */ -+ -+ memset(adev->rxdesc_start, 0, RX_CNT * sizeof(*rxdesc)); -+ -+ /* loop over whole receive pool */ -+ rxdesc = adev->rxdesc_start; -+ mem_offs = rx_queue_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc); -+ rxdesc->Ctl_8 = DESC_CTL_RECLAIM | DESC_CTL_AUTODMA; -+ /* point to next rxdesc */ -+ rxdesc->pNextDesc = cpu2acx(mem_offs + sizeof(*rxdesc)); -+ /* go to the next one */ -+ mem_offs += sizeof(*rxdesc); -+ rxdesc++; -+ } -+ /* go to the last one */ -+ rxdesc--; -+ -+ /* and point to the first making it a ring buffer */ -+ rxdesc->pNextDesc = cpu2acx(rx_queue_start); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxpci_create_desc_queues -+*/ -+void -+acxpci_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start) -+{ -+ acxpci_create_tx_desc_queue(adev, tx_queue_start); -+ acxpci_create_rx_desc_queue(adev, rx_queue_start); -+} -+ -+ -+/*************************************************************** -+** acxpci_s_proc_diag_output -+*/ -+char* -+acxpci_s_proc_diag_output(char *p, acx_device_t *adev) -+{ -+ const char *rtl, *thd, *ttl; -+ rxhostdesc_t *rxhostdesc; -+ txdesc_t *txdesc; -+ int i; -+ -+ FN_ENTER; -+ -+ p += sprintf(p, "** Rx buf **\n"); -+ rxhostdesc = adev->rxhostdesc_start; -+ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { -+ rtl = (i == adev->rx_tail) ? " [tail]" : ""; -+ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)) ) -+ p += sprintf(p, "%02u FULL%s\n", i, rtl); -+ else -+ p += sprintf(p, "%02u empty%s\n", i, rtl); -+ rxhostdesc++; -+ } -+ p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free, -+ acx_queue_stopped(adev->ndev) ? "STOPPED" : "running"); -+ txdesc = adev->txdesc_start; -+ if (txdesc) for (i = 0; i < TX_CNT; i++) { -+ thd = (i == adev->tx_head) ? " [head]" : ""; -+ ttl = (i == adev->tx_tail) ? " [tail]" : ""; -+ if (txdesc->Ctl_8 & DESC_CTL_ACXDONE) -+ p += sprintf(p, "%02u free (%02X)%s%s\n", i, txdesc->Ctl_8, thd, ttl); -+ else -+ p += sprintf(p, "%02u tx (%02X)%s%s\n", i, txdesc->Ctl_8, thd, ttl); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ p += sprintf(p, -+ "\n" -+ "** PCI data **\n" -+ "txbuf_start %p, txbuf_area_size %u, txbuf_startphy %08llx\n" -+ "txdesc_size %u, txdesc_start %p\n" -+ "txhostdesc_start %p, txhostdesc_area_size %u, txhostdesc_startphy %08llx\n" -+ "rxdesc_start %p\n" -+ "rxhostdesc_start %p, rxhostdesc_area_size %u, rxhostdesc_startphy %08llx\n" -+ "rxbuf_start %p, rxbuf_area_size %u, rxbuf_startphy %08llx\n", -+ adev->txbuf_start, adev->txbuf_area_size, -+ (unsigned long long)adev->txbuf_startphy, -+ adev->txdesc_size, adev->txdesc_start, -+ adev->txhostdesc_start, adev->txhostdesc_area_size, -+ (unsigned long long)adev->txhostdesc_startphy, -+ adev->rxdesc_start, -+ adev->rxhostdesc_start, adev->rxhostdesc_area_size, -+ (unsigned long long)adev->rxhostdesc_startphy, -+ adev->rxbuf_start, adev->rxbuf_area_size, -+ (unsigned long long)adev->rxbuf_startphy); -+ -+ FN_EXIT0; -+ return p; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxpci_proc_eeprom_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ int i; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < 0x400; i++) { -+ acxpci_read_eeprom_byte(adev, i, p++); -+ } -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+*/ -+void -+acxpci_set_interrupt_mask(acx_device_t *adev) -+{ -+ if (IS_ACX111(adev)) { -+ adev->irq_mask = (u16) ~(0 -+ /* | HOST_INT_RX_DATA */ -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ | HOST_INT_RX_COMPLETE -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ | HOST_INT_IV_ICV_FAILURE -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ /* | HOST_INT_OVERFLOW */ -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ | HOST_INT_FCS_THRESHOLD -+ /* | HOST_INT_UNKNOWN */ -+ ); -+ /* Or else acx100 won't signal cmd completion, right? */ -+ adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */ -+ } else { -+ adev->irq_mask = (u16) ~(0 -+ /* | HOST_INT_RX_DATA */ -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ | HOST_INT_RX_COMPLETE -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ /* | HOST_INT_IV_ICV_FAILURE */ -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ /* | HOST_INT_OVERFLOW */ -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ /* | HOST_INT_FCS_THRESHOLD */ -+ /* | HOST_INT_UNKNOWN */ -+ ); -+ adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */ -+ } -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100pci_s_set_tx_level(acx_device_t *adev, u8 level_dbm) -+{ -+ /* since it can be assumed that at least the Maxim radio has a -+ * maximum power output of 20dBm and since it also can be -+ * assumed that these values drive the DAC responsible for -+ * setting the linear Tx level, I'd guess that these values -+ * should be the corresponding linear values for a dBm value, -+ * in other words: calculate the values from that formula: -+ * Y [dBm] = 10 * log (X [mW]) -+ * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm) -+ * and you're done... -+ * Hopefully that's ok, but you never know if we're actually -+ * right... (especially since Windows XP doesn't seem to show -+ * actual Tx dBm values :-P) */ -+ -+ /* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the -+ * values are EXACTLY mW!!! Not sure about RFMD and others, -+ * though... */ -+ static const u8 dbm2val_maxim[21] = { -+ 63, 63, 63, 62, -+ 61, 61, 60, 60, -+ 59, 58, 57, 55, -+ 53, 50, 47, 43, -+ 38, 31, 23, 13, -+ 0 -+ }; -+ static const u8 dbm2val_rfmd[21] = { -+ 0, 0, 0, 1, -+ 2, 2, 3, 3, -+ 4, 5, 6, 8, -+ 10, 13, 16, 20, -+ 25, 32, 41, 50, -+ 63 -+ }; -+ const u8 *table; -+ -+ switch (adev->radio_type) { -+ case RADIO_MAXIM_0D: -+ table = &dbm2val_maxim[0]; -+ break; -+ case RADIO_RFMD_11: -+ case RADIO_RALINK_15: -+ table = &dbm2val_rfmd[0]; -+ break; -+ default: -+ printk("%s: unknown/unsupported radio type, " -+ "cannot modify tx power level yet!\n", -+ adev->ndev->name); -+ return NOT_OK; -+ } -+ printk("%s: changing radio power level to %u dBm (%u)\n", -+ adev->ndev->name, level_dbm, table[level_dbm]); -+ acxpci_s_write_phy_reg(adev, 0x11, table[level_dbm]); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** Data for init_module/cleanup_module -+*/ -+static const struct pci_device_id -+acxpci_id_tbl[] __devinitdata = { -+ { -+ .vendor = PCI_VENDOR_ID_TI, -+ .device = PCI_DEVICE_ID_TI_TNETW1100A, -+ .subvendor = PCI_ANY_ID, -+ .subdevice = PCI_ANY_ID, -+ .driver_data = CHIPTYPE_ACX100, -+ }, -+ { -+ .vendor = PCI_VENDOR_ID_TI, -+ .device = PCI_DEVICE_ID_TI_TNETW1100B, -+ .subvendor = PCI_ANY_ID, -+ .subdevice = PCI_ANY_ID, -+ .driver_data = CHIPTYPE_ACX100, -+ }, -+ { -+ .vendor = PCI_VENDOR_ID_TI, -+ .device = PCI_DEVICE_ID_TI_TNETW1130, -+ .subvendor = PCI_ANY_ID, -+ .subdevice = PCI_ANY_ID, -+ .driver_data = CHIPTYPE_ACX111, -+ }, -+ { -+ .vendor = 0, -+ .device = 0, -+ .subvendor = 0, -+ .subdevice = 0, -+ .driver_data = 0, -+ } -+}; -+ -+MODULE_DEVICE_TABLE(pci, acxpci_id_tbl); -+ -+/* FIXME: checks should be removed once driver is included in the kernel */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 11) -+/* pci_name() got introduced at start of 2.6.x, -+ * got mandatory (slot_name member removed) in 2.6.11-bk1 */ -+#define pci_name(x) x->slot_name -+#endif -+ -+static struct pci_driver -+acxpci_drv_id = { -+ .name = "acx_pci", -+ .id_table = acxpci_id_tbl, -+ .probe = acxpci_e_probe, -+ .remove = __devexit_p(acxpci_e_remove), -+#ifdef CONFIG_PM -+ .suspend = acxpci_e_suspend, -+ .resume = acxpci_e_resume -+#endif /* CONFIG_PM */ -+}; -+ -+ -+/*********************************************************************** -+** acxpci_e_init_module -+** -+** Module initialization routine, called once at module load time -+*/ -+int __init -+acxpci_e_init_module(void) -+{ -+ int res; -+ -+ FN_ENTER; -+ -+#if (ACX_IO_WIDTH==32) -+ printk("acx: compiled to use 32bit I/O access. " -+ "I/O timing issues might occur, such as " -+ "non-working firmware upload. Report them\n"); -+#else -+ printk("acx: compiled to use 16bit I/O access only " -+ "(compatibility mode)\n"); -+#endif -+ -+#ifdef __LITTLE_ENDIAN -+#define ENDIANNESS_STRING "running on a little-endian CPU\n" -+#else -+#define ENDIANNESS_STRING "running on a BIG-ENDIAN CPU\n" -+#endif -+ log(L_INIT, -+ ENDIANNESS_STRING -+ "PCI module " ACX_RELEASE " initialized, " -+ "waiting for cards to probe...\n" -+ ); -+ -+ res = pci_register_driver(&acxpci_drv_id); -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxpci_e_cleanup_module -+** -+** Called at module unload time. This is our last chance to -+** clean up after ourselves. -+*/ -+void __exit -+acxpci_e_cleanup_module(void) -+{ -+ FN_ENTER; -+ -+ pci_unregister_driver(&acxpci_drv_id); -+ -+ FN_EXIT0; -+} -Index: linux-2.6.22/drivers/net/wireless/acx/rx3000_acx.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/rx3000_acx.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,110 @@ -+/* -+ * WLAN (TI TNETW1100B) support in the HP iPAQ RX3000 -+ * -+ * Copyright (c) 2006 SDG Systems, LLC -+ * Copyright (c) 2006 Roman Moravcik -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * Based on hx4700_acx.c -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx_hw.h" -+ -+extern struct platform_device s3c_device_asic3; -+ -+static int rx3000_wlan_start(void) -+{ -+ DPM_DEBUG("rx3000_acx: Turning on\n"); -+ asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, ASIC3_GPB3); -+ mdelay(20); -+ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC13, ASIC3_GPC13); -+ mdelay(20); -+ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC11, ASIC3_GPC11); -+ mdelay(100); -+ asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, ASIC3_GPB3); -+ mdelay(20); -+ s3c2410_gpio_cfgpin(S3C2410_GPA15, S3C2410_GPA15_nGCS4); -+ mdelay(100); -+ s3c2410_gpio_setpin(S3C2410_GPA11, 0); -+ mdelay(50); -+ s3c2410_gpio_setpin(S3C2410_GPA11, 1); -+ led_trigger_event_shared(rx3000_radio_trig, LED_FULL); -+ return 0; -+} -+ -+static int rx3000_wlan_stop(void) -+{ -+ DPM_DEBUG("rx3000_acx: Turning off\n"); -+ s3c2410_gpio_setpin(S3C2410_GPA15, 1); -+ s3c2410_gpio_cfgpin(S3C2410_GPA15, S3C2410_GPA15_OUT); -+ asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, 0); -+ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC13, 0); -+ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC11, 0); -+ led_trigger_event_shared(rx3000_radio_trig, LED_OFF); -+ return 0; -+} -+ -+static struct resource acx_resources[] = { -+ [0] = { -+ .start = RX3000_PA_WLAN, -+ .end = RX3000_PA_WLAN + 0x20, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = IRQ_EINT16, -+ .end = IRQ_EINT16, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct acx_hardware_data acx_data = { -+ .start_hw = rx3000_wlan_start, -+ .stop_hw = rx3000_wlan_stop, -+}; -+ -+static struct platform_device acx_device = { -+ .name = "acx-mem", -+ .dev = { -+ .platform_data = &acx_data, -+ }, -+ .num_resources = ARRAY_SIZE(acx_resources), -+ .resource = acx_resources, -+}; -+ -+static int __init rx3000_wlan_init(void) -+{ -+ printk("rx3000_wlan_init: acx-mem platform_device_register\n"); -+ return platform_device_register(&acx_device); -+} -+ -+ -+static void __exit rx3000_wlan_exit(void) -+{ -+ platform_device_unregister(&acx_device); -+} -+ -+module_init(rx3000_wlan_init); -+module_exit(rx3000_wlan_exit); -+ -+MODULE_AUTHOR("Todd Blumer , Roman Moravcik "); -+MODULE_DESCRIPTION("WLAN driver for HP iPAQ RX3000"); -+MODULE_LICENSE("GPL"); -+ -Index: linux-2.6.22/drivers/net/wireless/acx/setrate.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/setrate.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,213 @@ -+/* TODO: stop #including, move into wireless.c -+ * until then, keep in sync copies in prism54/ and acx/ dirs -+ * code+data size: less than 1k */ -+ -+enum { -+ DOT11_RATE_1, -+ DOT11_RATE_2, -+ DOT11_RATE_5, -+ DOT11_RATE_11, -+ DOT11_RATE_22, -+ DOT11_RATE_33, -+ DOT11_RATE_6, -+ DOT11_RATE_9, -+ DOT11_RATE_12, -+ DOT11_RATE_18, -+ DOT11_RATE_24, -+ DOT11_RATE_36, -+ DOT11_RATE_48, -+ DOT11_RATE_54 -+}; -+enum { -+ DOT11_MOD_DBPSK, -+ DOT11_MOD_DQPSK, -+ DOT11_MOD_CCK, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_CCKOFDM, -+ DOT11_MOD_PBCC -+}; -+static const u8 ratelist[] = { 1,2,5,11,22,33,6,9,12,18,24,36,48,54 }; -+static const u8 dot11ratebyte[] = { 1*2,2*2,11,11*2,22*2,33*2,6*2,9*2,12*2,18*2,24*2,36*2,48*2,54*2 }; -+static const u8 default_modulation[] = { -+ DOT11_MOD_DBPSK, -+ DOT11_MOD_DQPSK, -+ DOT11_MOD_CCK, -+ DOT11_MOD_CCK, -+ DOT11_MOD_PBCC, -+ DOT11_MOD_PBCC, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM -+}; -+ -+static /* TODO: remove 'static' when moved to wireless.c */ -+int -+rate_mbit2enum(int n) { -+ int i=0; -+ while(i=DOT11_RATE_6) return DOT11_MOD_OFDM; */ -+ return default_modulation[r_enum]; -+ } -+ if(suffix=='c') { -+ if(r_enumDOT11_RATE_11) return -EINVAL; -+ return DOT11_MOD_CCK; -+ } -+ if(suffix=='p') { -+ if(r_enumDOT11_RATE_33) return -EINVAL; -+ return DOT11_MOD_PBCC; -+ } -+ if(suffix=='o') { -+ if(r_enumINT_MAX) return -EINVAL; -+ -+ rate_enum = rate_mbit2enum(rate_mbit); -+ if(rate_enum<0) return rate_enum; -+ -+ c = *str; -+ mod = get_modulation(rate_enum, c); -+ if(mod<0) return mod; -+ -+ if(c>='a' && c<='z') c = *++str; -+ if(c!=',' && c!=' ' && c!='\0') return -EINVAL; -+ -+ if(supported) { -+ int r = supported(rate_mbit, mod, opaque); -+ if(r) return r; -+ } -+ -+ *vector++ = dot11ratebyte[rate_enum] | or_mask; -+ -+ size--; -+ str++; -+ } while(size>0 && c==','); -+ -+ if(size<1) return -E2BIG; -+ *vector=0; /* TODO: sort, remove dups? */ -+ -+ *pstr = str-1; -+ return 0; -+} -+ -+static /* TODO: remove 'static' when moved to wireless.c */ -+int -+fill_ratevectors(const char *str, u8 *brate, u8 *orate, int size, -+ int (*supported)(int mbit, int mod, void *opaque), void *opaque) -+{ -+ int r; -+ -+ r = fill_ratevector(&str, brate, size, supported, opaque, 0x80); -+ if(r) return r; -+ -+ orate[0] = 0; -+ if(*str==' ') { -+ str++; -+ r = fill_ratevector(&str, orate, size, supported, opaque, 0); -+ if(r) return r; -+ /* TODO: sanitize, e.g. remove/error on rates already in basic rate set? */ -+ } -+ if(*str) -+ return -EINVAL; -+ -+ return 0; -+} -+#endif -+ -+/* TODO: use u64 masks? */ -+ -+static int -+fill_ratemask(const char **pstr, u32* mask, -+ int (*supported)(int mbit, int mod,void *opaque), -+ u32 (*gen_mask)(int mbit, int mod,void *opaque), -+ void *opaque) -+{ -+ unsigned long rate_mbit; -+ int rate_enum,mod; -+ u32 m = 0; -+ const char *str = *pstr; -+ char c; -+ -+ do { -+ rate_mbit = simple_strtoul(str, (char**)&str, 10); -+ if(rate_mbit>INT_MAX) return -EINVAL; -+ -+ rate_enum = rate_mbit2enum(rate_mbit); -+ if(rate_enum<0) return rate_enum; -+ -+ c = *str; -+ mod = get_modulation(rate_enum, c); -+ if(mod<0) return mod; -+ -+ if(c>='a' && c<='z') c = *++str; -+ if(c!=',' && c!=' ' && c!='\0') return -EINVAL; -+ -+ if(supported) { -+ int r = supported(rate_mbit, mod, opaque); -+ if(r) return r; -+ } -+ -+ m |= gen_mask(rate_mbit, mod, opaque); -+ str++; -+ } while(c==','); -+ -+ *pstr = str-1; -+ *mask |= m; -+ return 0; -+} -+ -+static /* TODO: remove 'static' when moved to wireless.c */ -+int -+fill_ratemasks(const char *str, u32 *bmask, u32 *omask, -+ int (*supported)(int mbit, int mod,void *opaque), -+ u32 (*gen_mask)(int mbit, int mod,void *opaque), -+ void *opaque) -+{ -+ int r; -+ -+ r = fill_ratemask(&str, bmask, supported, gen_mask, opaque); -+ if(r) return r; -+ -+ if(*str==' ') { -+ str++; -+ r = fill_ratemask(&str, omask, supported, gen_mask, opaque); -+ if(r) return r; -+ } -+ if(*str) -+ return -EINVAL; -+ return 0; -+} -Index: linux-2.6.22/drivers/net/wireless/acx/usb.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/usb.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,1922 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** USB support for TI ACX100 based devices. Many parts are taken from -+** the PCI driver. -+** -+** Authors: -+** Martin Wawro -+** Andreas Mohr -+** -+** LOCKING -+** callback functions called by USB core are running in interrupt context -+** and thus have names with _i_. -+*/ -+#define ACX_USB 1 -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx.h" -+ -+ -+/*********************************************************************** -+*/ -+/* number of endpoints of an interface */ -+#define NUM_EP(intf) (intf)->altsetting[0].desc.bNumEndpoints -+#define EP(intf, nr) (intf)->altsetting[0].endpoint[(nr)].desc -+#define GET_DEV(udev) usb_get_dev((udev)) -+#define PUT_DEV(udev) usb_put_dev((udev)) -+#define SET_NETDEV_OWNER(ndev, owner) /* not needed anymore ??? */ -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14) -+/* removed in 2.6.14. We will use fake value for now */ -+#define URB_ASYNC_UNLINK 0 -+#endif -+ -+ -+/*********************************************************************** -+*/ -+/* ACX100 (TNETW1100) USB device: D-Link DWL-120+ */ -+#define ACX100_VENDOR_ID 0x2001 -+#define ACX100_PRODUCT_ID_UNBOOTED 0x3B01 -+#define ACX100_PRODUCT_ID_BOOTED 0x3B00 -+ -+/* TNETW1450 USB devices */ -+#define VENDOR_ID_DLINK 0x07b8 /* D-Link Corp. */ -+#define PRODUCT_ID_WUG2400 0xb21a /* AboCom WUG2400 or SafeCom SWLUT-54125 */ -+#define VENDOR_ID_AVM_GMBH 0x057c -+#define PRODUCT_ID_AVM_WLAN_USB 0x5601 -+#define PRODUCT_ID_AVM_WLAN_USB_si 0x6201 /* "self install" named Version: driver kills kernel on inbound scans from fritz box ??? */ -+#define VENDOR_ID_ZCOM 0x0cde -+#define PRODUCT_ID_ZCOM_XG750 0x0017 /* not tested yet */ -+#define VENDOR_ID_TI 0x0451 -+#define PRODUCT_ID_TI_UNKNOWN 0x60c5 /* not tested yet */ -+ -+#define ACX_USB_CTRL_TIMEOUT 5500 /* steps in ms */ -+ -+/* Buffer size for fw upload, same for both ACX100 USB and TNETW1450 */ -+#define USB_RWMEM_MAXLEN 2048 -+ -+/* The number of bulk URBs to use */ -+#define ACX_TX_URB_CNT 8 -+#define ACX_RX_URB_CNT 2 -+ -+/* Should be sent to the bulkout endpoint */ -+#define ACX_USB_REQ_UPLOAD_FW 0x10 -+#define ACX_USB_REQ_ACK_CS 0x11 -+#define ACX_USB_REQ_CMD 0x12 -+ -+/*********************************************************************** -+** Prototypes -+*/ -+static int acxusb_e_probe(struct usb_interface *, const struct usb_device_id *); -+static void acxusb_e_disconnect(struct usb_interface *); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+static void acxusb_i_complete_tx(struct urb *); -+static void acxusb_i_complete_rx(struct urb *); -+#else -+static void acxusb_i_complete_tx(struct urb *, struct pt_regs *); -+static void acxusb_i_complete_rx(struct urb *, struct pt_regs *); -+#endif -+static int acxusb_e_open(struct net_device *); -+static int acxusb_e_close(struct net_device *); -+static void acxusb_i_set_rx_mode(struct net_device *); -+static int acxusb_boot(struct usb_device *, int is_tnetw1450, int *radio_type); -+ -+static void acxusb_l_poll_rx(acx_device_t *adev, usb_rx_t* rx); -+ -+static void acxusb_i_tx_timeout(struct net_device *); -+ -+/* static void dump_device(struct usb_device *); */ -+/* static void dump_device_descriptor(struct usb_device_descriptor *); */ -+/* static void dump_config_descriptor(struct usb_config_descriptor *); */ -+ -+/*********************************************************************** -+** Module Data -+*/ -+#define TXBUFSIZE sizeof(usb_txbuffer_t) -+/* -+ * Now, this is just plain lying, but the device insists in giving us -+ * huge packets. We supply extra space after rxbuffer. Need to understand -+ * it better... -+ */ -+#define RXBUFSIZE (sizeof(rxbuffer_t) + \ -+ (sizeof(usb_rx_t) - sizeof(struct usb_rx_plain))) -+ -+static const struct usb_device_id -+acxusb_ids[] = { -+ { USB_DEVICE(ACX100_VENDOR_ID, ACX100_PRODUCT_ID_BOOTED) }, -+ { USB_DEVICE(ACX100_VENDOR_ID, ACX100_PRODUCT_ID_UNBOOTED) }, -+ { USB_DEVICE(VENDOR_ID_DLINK, PRODUCT_ID_WUG2400) }, -+ { USB_DEVICE(VENDOR_ID_AVM_GMBH, PRODUCT_ID_AVM_WLAN_USB) }, -+ { USB_DEVICE(VENDOR_ID_AVM_GMBH, PRODUCT_ID_AVM_WLAN_USB_si) }, -+ { USB_DEVICE(VENDOR_ID_ZCOM, PRODUCT_ID_ZCOM_XG750) }, -+ { USB_DEVICE(VENDOR_ID_TI, PRODUCT_ID_TI_UNKNOWN) }, -+ {} -+}; -+ -+MODULE_DEVICE_TABLE(usb, acxusb_ids); -+ -+/* USB driver data structure as required by the kernel's USB core */ -+static struct usb_driver -+acxusb_driver = { -+ .name = "acx_usb", -+ .probe = acxusb_e_probe, -+ .disconnect = acxusb_e_disconnect, -+ .id_table = acxusb_ids -+}; -+ -+ -+/*********************************************************************** -+** USB helper -+** -+** ldd3 ch13 says: -+** When the function is usb_kill_urb, the urb lifecycle is stopped. This -+** function is usually used when the device is disconnected from the system, -+** in the disconnect callback. For some drivers, the usb_unlink_urb function -+** should be used to tell the USB core to stop an urb. This function does not -+** wait for the urb to be fully stopped before returning to the caller. -+** This is useful for stoppingthe urb while in an interrupt handler or when -+** a spinlock is held, as waiting for a urb to fully stop requires the ability -+** for the USB core to put the calling process to sleep. This function requires -+** that the URB_ASYNC_UNLINK flag value be set in the urb that is being asked -+** to be stopped in order to work properly. -+** -+** (URB_ASYNC_UNLINK is obsolete, usb_unlink_urb will always be -+** asynchronous while usb_kill_urb is synchronous and should be called -+** directly (drivers/usb/core/urb.c)) -+** -+** In light of this, timeout is just for paranoid reasons... -+* -+* Actually, it's useful for debugging. If we reach timeout, we're doing -+* something wrong with the urbs. -+*/ -+static void -+acxusb_unlink_urb(struct urb* urb) -+{ -+ if (!urb) -+ return; -+ -+ if (urb->status == -EINPROGRESS) { -+ int timeout = 10; -+ -+ usb_unlink_urb(urb); -+ while (--timeout && urb->status == -EINPROGRESS) { -+ mdelay(1); -+ } -+ if (!timeout) { -+ printk("acx_usb: urb unlink timeout!\n"); -+ } -+ } -+} -+ -+ -+/*********************************************************************** -+** EEPROM and PHY read/write helpers -+*/ -+/*********************************************************************** -+** acxusb_s_read_phy_reg -+*/ -+int -+acxusb_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) -+{ -+ /* mem_read_write_t mem; */ -+ -+ FN_ENTER; -+ -+ printk("%s doesn't seem to work yet, disabled.\n", __func__); -+ -+ /* -+ mem.addr = cpu_to_le16(reg); -+ mem.type = cpu_to_le16(0x82); -+ mem.len = cpu_to_le32(4); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_MEM_READ, &mem, sizeof(mem)); -+ *charbuf = mem.data; -+ log(L_DEBUG, "read radio PHY[0x%04X]=0x%02X\n", reg, *charbuf); -+ */ -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxusb_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) -+{ -+ mem_read_write_t mem; -+ -+ FN_ENTER; -+ -+ mem.addr = cpu_to_le16(reg); -+ mem.type = cpu_to_le16(0x82); -+ mem.len = cpu_to_le32(4); -+ mem.data = value; -+ acx_s_issue_cmd(adev, ACX1xx_CMD_MEM_WRITE, &mem, sizeof(mem)); -+ log(L_DEBUG, "write radio PHY[0x%04X]=0x%02X\n", reg, value); -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acxusb_s_issue_cmd_timeo -+** Excecutes a command in the command mailbox -+** -+** buffer = a pointer to the data. -+** The data must not include 4 byte command header -+*/ -+ -+/* TODO: ideally we shall always know how much we need -+** and this shall be 0 */ -+#define BOGUS_SAFETY_PADDING 0x40 -+ -+#undef FUNC -+#define FUNC "issue_cmd" -+ -+#if !ACX_DEBUG -+int -+acxusb_s_issue_cmd_timeo( -+ acx_device_t *adev, -+ unsigned cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned timeout) -+{ -+#else -+int -+acxusb_s_issue_cmd_timeo_debug( -+ acx_device_t *adev, -+ unsigned cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned timeout, -+ const char* cmdstr) -+{ -+#endif -+ /* USB ignores timeout param */ -+ -+ struct usb_device *usbdev; -+ struct { -+ u16 cmd; -+ u16 status; -+ u8 data[1]; -+ } ACX_PACKED *loc; -+ const char *devname; -+ int acklen, blocklen, inpipe, outpipe; -+ int cmd_status; -+ int result; -+ -+ FN_ENTER; -+ -+ devname = adev->ndev->name; -+ /* no "wlan%%d: ..." please */ -+ if (!devname || !devname[0] || devname[4]=='%') -+ devname = "acx"; -+ -+ log(L_CTL, FUNC"(cmd:%s,buflen:%u,type:0x%04X)\n", -+ cmdstr, buflen, -+ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); -+ -+ loc = kmalloc(buflen + 4 + BOGUS_SAFETY_PADDING, GFP_KERNEL); -+ if (!loc) { -+ printk("%s: "FUNC"(): no memory for data buffer\n", devname); -+ goto bad; -+ } -+ -+ /* get context from acx_device */ -+ usbdev = adev->usbdev; -+ -+ /* check which kind of command was issued */ -+ loc->cmd = cpu_to_le16(cmd); -+ loc->status = 0; -+ -+/* NB: buflen == frmlen + 4 -+** -+** Interrogate: write 8 bytes: (cmd,status,rid,frmlen), then -+** read (cmd,status,rid,frmlen,data[frmlen]) back -+** -+** Configure: write (cmd,status,rid,frmlen,data[frmlen]) -+** -+** Possibly bogus special handling of ACX1xx_IE_SCAN_STATUS removed -+*/ -+ -+ /* now write the parameters of the command if needed */ -+ acklen = buflen + 4 + BOGUS_SAFETY_PADDING; -+ blocklen = buflen; -+ if (buffer && buflen) { -+ /* if it's an INTERROGATE command, just pass the length -+ * of parameters to read, as data */ -+ if (cmd == ACX1xx_CMD_INTERROGATE) { -+ blocklen = 4; -+ acklen = buflen + 4; -+ } -+ memcpy(loc->data, buffer, blocklen); -+ } -+ blocklen += 4; /* account for cmd,status */ -+ -+ /* obtain the I/O pipes */ -+ outpipe = usb_sndctrlpipe(usbdev, 0); -+ inpipe = usb_rcvctrlpipe(usbdev, 0); -+ log(L_CTL, "ctrl inpipe=0x%X outpipe=0x%X\n", inpipe, outpipe); -+ log(L_CTL, "sending USB control msg (out) (blocklen=%d)\n", blocklen); -+ if (acx_debug & L_DATA) -+ acx_dump_bytes(loc, blocklen); -+ -+ result = usb_control_msg(usbdev, outpipe, -+ ACX_USB_REQ_CMD, /* request */ -+ USB_TYPE_VENDOR|USB_DIR_OUT, /* requesttype */ -+ 0, /* value */ -+ 0, /* index */ -+ loc, /* dataptr */ -+ blocklen, /* size */ -+ ACX_USB_CTRL_TIMEOUT /* timeout in ms */ -+ ); -+ -+ if (result == -ENODEV) { -+ log(L_CTL, "no device present (unplug?)\n"); -+ goto good; -+ } -+ -+ log(L_CTL, "wrote %d bytes\n", result); -+ if (result < 0) { -+ goto bad; -+ } -+ -+ /* check for device acknowledge */ -+ log(L_CTL, "sending USB control msg (in) (acklen=%d)\n", acklen); -+ loc->status = 0; /* delete old status flag -> set to IDLE */ -+ /* shall we zero out the rest? */ -+ result = usb_control_msg(usbdev, inpipe, -+ ACX_USB_REQ_CMD, /* request */ -+ USB_TYPE_VENDOR|USB_DIR_IN, /* requesttype */ -+ 0, /* value */ -+ 0, /* index */ -+ loc, /* dataptr */ -+ acklen, /* size */ -+ ACX_USB_CTRL_TIMEOUT /* timeout in ms */ -+ ); -+ if (result < 0) { -+ printk("%s: "FUNC"(): USB read error %d\n", devname, result); -+ goto bad; -+ } -+ if (acx_debug & L_CTL) { -+ printk("read %d bytes: ", result); -+ acx_dump_bytes(loc, result); -+ } -+ -+/* -+ check for result==buflen+4? Was seen: -+ -+interrogate(type:ACX100_IE_DOT11_ED_THRESHOLD,len:4) -+issue_cmd(cmd:ACX1xx_CMD_INTERROGATE,buflen:8,type:4111) -+ctrl inpipe=0x80000280 outpipe=0x80000200 -+sending USB control msg (out) (blocklen=8) -+01 00 00 00 0F 10 04 00 -+wrote 8 bytes -+sending USB control msg (in) (acklen=12) sizeof(loc->data -+read 4 bytes <==== MUST BE 12!! -+*/ -+ -+ cmd_status = le16_to_cpu(loc->status); -+ if (cmd_status != 1) { -+ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s)\n", -+ devname, cmd_status, acx_cmd_status_str(cmd_status)); -+ /* TODO: goto bad; ? */ -+ } -+ if ((cmd == ACX1xx_CMD_INTERROGATE) && buffer && buflen) { -+ memcpy(buffer, loc->data, buflen); -+ log(L_CTL, "response frame: cmd=0x%04X status=%d\n", -+ le16_to_cpu(loc->cmd), -+ cmd_status); -+ } -+good: -+ kfree(loc); -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ /* Give enough info so that callers can avoid -+ ** printing their own diagnostic messages */ -+#if ACX_DEBUG -+ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); -+#else -+ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); -+#endif -+ dump_stack(); -+ kfree(loc); -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acxusb_boot() -+** Inputs: -+** usbdev -> Pointer to kernel's usb_device structure -+** -+** Returns: -+** (int) Errorcode or 0 on success -+** -+** This function triggers the loading of the firmware image from harddisk -+** and then uploads the firmware to the USB device. After uploading the -+** firmware and transmitting the checksum, the device resets and appears -+** as a new device on the USB bus (the device we can finally deal with) -+*/ -+static inline int -+acxusb_fw_needs_padding(firmware_image_t *fw_image, unsigned int usb_maxlen) -+{ -+ unsigned int num_xfers = ((fw_image->size - 1) / usb_maxlen) + 1; -+ -+ return ((num_xfers % 2) == 0); -+} -+ -+static int -+acxusb_boot(struct usb_device *usbdev, int is_tnetw1450, int *radio_type) -+{ -+ char filename[sizeof("tiacx1NNusbcRR")]; -+ -+ firmware_image_t *fw_image = NULL; -+ char *usbbuf; -+ unsigned int offset; -+ unsigned int blk_len, inpipe, outpipe; -+ u32 num_processed; -+ u32 img_checksum, sum; -+ u32 file_size; -+ int result = -EIO; -+ int i; -+ -+ FN_ENTER; -+ -+ /* dump_device(usbdev); */ -+ -+ usbbuf = kmalloc(USB_RWMEM_MAXLEN, GFP_KERNEL); -+ if (!usbbuf) { -+ printk(KERN_ERR "acx: no memory for USB transfer buffer (%d bytes)\n", USB_RWMEM_MAXLEN); -+ result = -ENOMEM; -+ goto end; -+ } -+ if (is_tnetw1450) { -+ /* Obtain the I/O pipes */ -+ outpipe = usb_sndbulkpipe(usbdev, 1); -+ inpipe = usb_rcvbulkpipe(usbdev, 2); -+ -+ printk(KERN_DEBUG "wait for device ready\n"); -+ for (i = 0; i <= 2; i++) { -+ result = usb_bulk_msg(usbdev, inpipe, -+ usbbuf, -+ USB_RWMEM_MAXLEN, -+ &num_processed, -+ 2000 -+ ); -+ -+ if ((*(u32 *)&usbbuf[4] == 0x40000001) -+ && (*(u16 *)&usbbuf[2] == 0x1) -+ && ((*(u16 *)usbbuf & 0x3fff) == 0) -+ && ((*(u16 *)usbbuf & 0xc000) == 0xc000)) -+ break; -+ msleep(10); -+ } -+ if (i == 2) -+ goto fw_end; -+ -+ *radio_type = usbbuf[8]; -+ } else { -+ /* Obtain the I/O pipes */ -+ outpipe = usb_sndctrlpipe(usbdev, 0); -+ inpipe = usb_rcvctrlpipe(usbdev, 0); -+ -+ /* FIXME: shouldn't be hardcoded */ -+ *radio_type = RADIO_MAXIM_0D; -+ } -+ -+ snprintf(filename, sizeof(filename), "tiacx1%02dusbc%02X", -+ is_tnetw1450 * 11, *radio_type); -+ -+ fw_image = acx_s_read_fw(&usbdev->dev, filename, &file_size); -+ if (!fw_image) { -+ result = -EIO; -+ goto end; -+ } -+ log(L_INIT, "firmware size: %d bytes\n", file_size); -+ -+ img_checksum = le32_to_cpu(fw_image->chksum); -+ -+ if (is_tnetw1450) { -+ u8 cmdbuf[20]; -+ const u8 *p; -+ u8 need_padding; -+ u32 tmplen, val; -+ -+ memset(cmdbuf, 0, 16); -+ -+ need_padding = acxusb_fw_needs_padding(fw_image, USB_RWMEM_MAXLEN); -+ tmplen = need_padding ? file_size-4 : file_size-8; -+ *(u16 *)&cmdbuf[0] = 0xc000; -+ *(u16 *)&cmdbuf[2] = 0x000b; -+ *(u32 *)&cmdbuf[4] = tmplen; -+ *(u32 *)&cmdbuf[8] = file_size-8; -+ *(u32 *)&cmdbuf[12] = img_checksum; -+ -+ result = usb_bulk_msg(usbdev, outpipe, cmdbuf, 16, &num_processed, HZ); -+ if (result < 0) -+ goto fw_end; -+ -+ p = (const u8 *)&fw_image->size; -+ -+ /* first calculate checksum for image size part */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+ /* now continue checksum for firmware data part */ -+ tmplen = le32_to_cpu(fw_image->size); -+ for (i = 0; i < tmplen /* image size */; i++) { -+ sum += *p++; -+ } -+ -+ if (sum != le32_to_cpu(fw_image->chksum)) { -+ printk("acx: FATAL: firmware upload: " -+ "checksums don't match! " -+ "(0x%08x vs. 0x%08x)\n", -+ sum, fw_image->chksum); -+ goto fw_end; -+ } -+ -+ offset = 8; -+ while (offset < file_size) { -+ blk_len = file_size - offset; -+ if (blk_len > USB_RWMEM_MAXLEN) { -+ blk_len = USB_RWMEM_MAXLEN; -+ } -+ -+ log(L_INIT, "uploading firmware (%d bytes, offset=%d)\n", -+ blk_len, offset); -+ memcpy(usbbuf, ((u8 *)fw_image) + offset, blk_len); -+ -+ p = usbbuf; -+ for (i = 0; i < blk_len; i += 4) { -+ *(u32 *)p = be32_to_cpu(*(u32 *)p); -+ p += 4; -+ } -+ -+ result = usb_bulk_msg(usbdev, outpipe, usbbuf, blk_len, &num_processed, HZ); -+ if ((result < 0) || (num_processed != blk_len)) -+ goto fw_end; -+ offset += blk_len; -+ } -+ if (need_padding) { -+ printk(KERN_DEBUG "send padding\n"); -+ memset(usbbuf, 0, 4); -+ result = usb_bulk_msg(usbdev, outpipe, usbbuf, 4, &num_processed, HZ); -+ if ((result < 0) || (num_processed != 4)) -+ goto fw_end; -+ } -+ printk(KERN_DEBUG "read firmware upload result\n"); -+ memset(cmdbuf, 0, 20); /* additional memset */ -+ result = usb_bulk_msg(usbdev, inpipe, cmdbuf, 20, &num_processed, 2000); -+ if (result < 0) -+ goto fw_end; -+ if (*(u32 *)&cmdbuf[4] == 0x40000003) -+ goto fw_end; -+ if (*(u32 *)&cmdbuf[4]) -+ goto fw_end; -+ if (*(u16 *)&cmdbuf[16] != 1) -+ goto fw_end; -+ -+ val = *(u32 *)&cmdbuf[0]; -+ if ((val & 0x3fff) -+ || ((val & 0xc000) != 0xc000)) -+ goto fw_end; -+ -+ val = *(u32 *)&cmdbuf[8]; -+ if (val & 2) { -+ result = usb_bulk_msg(usbdev, inpipe, cmdbuf, 20, &num_processed, 2000); -+ if (result < 0) -+ goto fw_end; -+ val = *(u32 *)&cmdbuf[8]; -+ } -+ /* yup, no "else" here! */ -+ if (val & 1) { -+ memset(usbbuf, 0, 4); -+ result = usb_bulk_msg(usbdev, outpipe, usbbuf, 4, &num_processed, HZ); -+ if ((result < 0) || (!num_processed)) -+ goto fw_end; -+ } -+ -+ printk("TNETW1450 firmware upload successful!\n"); -+ result = 0; -+ goto end; -+fw_end: -+ result = -EIO; -+ goto end; -+ } else { -+ /* ACX100 USB */ -+ -+ /* now upload the firmware, slice the data into blocks */ -+ offset = 8; -+ while (offset < file_size) { -+ blk_len = file_size - offset; -+ if (blk_len > USB_RWMEM_MAXLEN) { -+ blk_len = USB_RWMEM_MAXLEN; -+ } -+ log(L_INIT, "uploading firmware (%d bytes, offset=%d)\n", -+ blk_len, offset); -+ memcpy(usbbuf, ((u8 *)fw_image) + offset, blk_len); -+ result = usb_control_msg(usbdev, outpipe, -+ ACX_USB_REQ_UPLOAD_FW, -+ USB_TYPE_VENDOR|USB_DIR_OUT, -+ (file_size - 8) & 0xffff, /* value */ -+ (file_size - 8) >> 16, /* index */ -+ usbbuf, /* dataptr */ -+ blk_len, /* size */ -+ 3000 /* timeout in ms */ -+ ); -+ offset += blk_len; -+ if (result < 0) { -+ printk(KERN_ERR "acx: error %d during upload " -+ "of firmware, aborting\n", result); -+ goto end; -+ } -+ } -+ -+ /* finally, send the checksum and reboot the device */ -+ /* does this trigger the reboot? */ -+ result = usb_control_msg(usbdev, outpipe, -+ ACX_USB_REQ_UPLOAD_FW, -+ USB_TYPE_VENDOR|USB_DIR_OUT, -+ img_checksum & 0xffff, /* value */ -+ img_checksum >> 16, /* index */ -+ NULL, /* dataptr */ -+ 0, /* size */ -+ 3000 /* timeout in ms */ -+ ); -+ if (result < 0) { -+ printk(KERN_ERR "acx: error %d during tx of checksum, " -+ "aborting\n", result); -+ goto end; -+ } -+ result = usb_control_msg(usbdev, inpipe, -+ ACX_USB_REQ_ACK_CS, -+ USB_TYPE_VENDOR|USB_DIR_IN, -+ img_checksum & 0xffff, /* value */ -+ img_checksum >> 16, /* index */ -+ usbbuf, /* dataptr */ -+ 8, /* size */ -+ 3000 /* timeout in ms */ -+ ); -+ if (result < 0) { -+ printk(KERN_ERR "acx: error %d during ACK of checksum, " -+ "aborting\n", result); -+ goto end; -+ } -+ if (*usbbuf != 0x10) { -+ printk(KERN_ERR "acx: invalid checksum?\n"); -+ result = -EINVAL; -+ goto end; -+ } -+ result = 0; -+ } -+ -+end: -+ vfree(fw_image); -+ kfree(usbbuf); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/* FIXME: maybe merge it with usual eeprom reading, into common code? */ -+static void -+acxusb_s_read_eeprom_version(acx_device_t *adev) -+{ -+ u8 eeprom_ver[0x8]; -+ -+ memset(eeprom_ver, 0, sizeof(eeprom_ver)); -+ acx_s_interrogate(adev, &eeprom_ver, ACX1FF_IE_EEPROM_VER); -+ -+ /* FIXME: which one of those values to take? */ -+ adev->eeprom_version = eeprom_ver[5]; -+} -+ -+ -+/* -+ * temporary helper function to at least fill important cfgopt members with -+ * useful replacement values until we figure out how one manages to fetch -+ * the configoption struct in the USB device case... -+ */ -+static int -+acxusb_s_fill_configoption(acx_device_t *adev) -+{ -+ adev->cfgopt_probe_delay = 200; -+ adev->cfgopt_dot11CCAModes = 4; -+ adev->cfgopt_dot11Diversity = 1; -+ adev->cfgopt_dot11ShortPreambleOption = 1; -+ adev->cfgopt_dot11PBCCOption = 1; -+ adev->cfgopt_dot11ChannelAgility = 0; -+ adev->cfgopt_dot11PhyType = 5; -+ adev->cfgopt_dot11TempType = 1; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acxusb_e_probe() -+** -+** This function is invoked by the kernel's USB core whenever a new device is -+** attached to the system or the module is loaded. It is presented a usb_device -+** structure from which information regarding the device is obtained and evaluated. -+** In case this driver is able to handle one of the offered devices, it returns -+** a non-null pointer to a driver context and thereby claims the device. -+*/ -+ -+static void -+dummy_netdev_init(struct net_device *ndev) {} -+ -+static int -+acxusb_e_probe(struct usb_interface *intf, const struct usb_device_id *devID) -+{ -+ struct usb_device *usbdev = interface_to_usbdev(intf); -+ acx_device_t *adev = NULL; -+ struct net_device *ndev = NULL; -+ struct usb_config_descriptor *config; -+ struct usb_endpoint_descriptor *epdesc; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+ struct usb_host_endpoint *ep; -+#endif -+ struct usb_interface_descriptor *ifdesc; -+ const char* msg; -+ int numconfigs, numfaces, numep; -+ int result = OK; -+ int i; -+ int radio_type; -+ /* this one needs to be more precise in case there appears a TNETW1450 from the same vendor */ -+ int is_tnetw1450 = (usbdev->descriptor.idVendor != ACX100_VENDOR_ID); -+ -+ FN_ENTER; -+ -+ if (is_tnetw1450) { -+ /* Boot the device (i.e. upload the firmware) */ -+ acxusb_boot(usbdev, is_tnetw1450, &radio_type); -+ -+ /* TNETW1450-based cards will continue right away with -+ * the same USB ID after booting */ -+ } else { -+ /* First check if this is the "unbooted" hardware */ -+ if (usbdev->descriptor.idProduct == ACX100_PRODUCT_ID_UNBOOTED) { -+ -+ /* Boot the device (i.e. upload the firmware) */ -+ acxusb_boot(usbdev, is_tnetw1450, &radio_type); -+ -+ /* DWL-120+ will first boot the firmware, -+ * then later have a *separate* probe() run -+ * since its USB ID will have changed after -+ * firmware boot! -+ * Since the first probe() run has no -+ * other purpose than booting the firmware, -+ * simply return immediately. -+ */ -+ log(L_INIT, "finished booting, returning from probe()\n"); -+ result = OK; /* success */ -+ goto end; -+ } -+ else -+ /* device not unbooted, but invalid USB ID!? */ -+ if (usbdev->descriptor.idProduct != ACX100_PRODUCT_ID_BOOTED) -+ goto end_nodev; -+ } -+ -+/* Ok, so it's our device and it has already booted */ -+ -+ /* Allocate memory for a network device */ -+ -+ ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init); -+ /* (NB: memsets to 0 entire area) */ -+ if (!ndev) { -+ msg = "acx: no memory for netdev\n"; -+ goto end_nomem; -+ } -+ -+ /* Register the callbacks for the network device functions */ -+ -+ ether_setup(ndev); -+ ndev->open = &acxusb_e_open; -+ ndev->stop = &acxusb_e_close; -+ ndev->hard_start_xmit = (void *)&acx_i_start_xmit; -+ ndev->get_stats = (void *)&acx_e_get_stats; -+#if IW_HANDLER_VERSION <= 5 -+ ndev->get_wireless_stats = (void *)&acx_e_get_wireless_stats; -+#endif -+ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -+ ndev->set_multicast_list = (void *)&acxusb_i_set_rx_mode; -+#ifdef HAVE_TX_TIMEOUT -+ ndev->tx_timeout = &acxusb_i_tx_timeout; -+ ndev->watchdog_timeo = 4 * HZ; -+#endif -+ ndev->change_mtu = &acx_e_change_mtu; -+ SET_MODULE_OWNER(ndev); -+ -+ /* Setup private driver context */ -+ -+ adev = ndev2adev(ndev); -+ adev->ndev = ndev; -+ -+ adev->dev_type = DEVTYPE_USB; -+ adev->radio_type = radio_type; -+ if (is_tnetw1450) { -+ /* well, actually it's a TNETW1450, but since it -+ * seems to be sufficiently similar to TNETW1130, -+ * I don't want to change large amounts of code now */ -+ adev->chip_type = CHIPTYPE_ACX111; -+ } else { -+ adev->chip_type = CHIPTYPE_ACX100; -+ } -+ -+ adev->usbdev = usbdev; -+ spin_lock_init(&adev->lock); /* initial state: unlocked */ -+ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ -+ -+ /* Check that this is really the hardware we know about. -+ ** If not sure, at least notify the user that he -+ ** may be in trouble... -+ */ -+ numconfigs = (int)usbdev->descriptor.bNumConfigurations; -+ if (numconfigs != 1) -+ printk("acx: number of configurations is %d, " -+ "this driver only knows how to handle 1, " -+ "be prepared for surprises\n", numconfigs); -+ -+ config = &usbdev->config->desc; -+ numfaces = config->bNumInterfaces; -+ if (numfaces != 1) -+ printk("acx: number of interfaces is %d, " -+ "this driver only knows how to handle 1, " -+ "be prepared for surprises\n", numfaces); -+ -+ ifdesc = &intf->altsetting->desc; -+ numep = ifdesc->bNumEndpoints; -+ log(L_DEBUG, "# of endpoints: %d\n", numep); -+ -+ if (is_tnetw1450) { -+ adev->bulkoutep = 1; -+ adev->bulkinep = 2; -+ } else { -+ /* obtain information about the endpoint -+ ** addresses, begin with some default values -+ */ -+ adev->bulkoutep = 1; -+ adev->bulkinep = 1; -+ for (i = 0; i < numep; i++) { -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+ ep = usbdev->ep_in[i]; -+ if (!ep) -+ continue; -+ epdesc = &ep->desc; -+#else -+ epdesc = usb_epnum_to_ep_desc(usbdev, i); -+ if (!epdesc) -+ continue; -+#endif -+ if (epdesc->bmAttributes & USB_ENDPOINT_XFER_BULK) { -+ if (epdesc->bEndpointAddress & 0x80) -+ adev->bulkinep = epdesc->bEndpointAddress & 0xF; -+ else -+ adev->bulkoutep = epdesc->bEndpointAddress & 0xF; -+ } -+ } -+ } -+ log(L_DEBUG, "bulkout ep: 0x%X\n", adev->bulkoutep); -+ log(L_DEBUG, "bulkin ep: 0x%X\n", adev->bulkinep); -+ -+ /* already done by memset: adev->rxtruncsize = 0; */ -+ log(L_DEBUG, "TXBUFSIZE=%d RXBUFSIZE=%d\n", -+ (int) TXBUFSIZE, (int) RXBUFSIZE); -+ -+ /* Allocate the RX/TX containers. */ -+ adev->usb_tx = kmalloc(sizeof(usb_tx_t) * ACX_TX_URB_CNT, GFP_KERNEL); -+ if (!adev->usb_tx) { -+ msg = "acx: no memory for tx container"; -+ goto end_nomem; -+ } -+ adev->usb_rx = kmalloc(sizeof(usb_rx_t) * ACX_RX_URB_CNT, GFP_KERNEL); -+ if (!adev->usb_rx) { -+ msg = "acx: no memory for rx container"; -+ goto end_nomem; -+ } -+ -+ /* Setup URBs for bulk-in/out messages */ -+ for (i = 0; i < ACX_RX_URB_CNT; i++) { -+ adev->usb_rx[i].urb = usb_alloc_urb(0, GFP_KERNEL); -+ if (!adev->usb_rx[i].urb) { -+ msg = "acx: no memory for input URB\n"; -+ goto end_nomem; -+ } -+ adev->usb_rx[i].urb->status = 0; -+ adev->usb_rx[i].adev = adev; -+ adev->usb_rx[i].busy = 0; -+ } -+ -+ for (i = 0; i< ACX_TX_URB_CNT; i++) { -+ adev->usb_tx[i].urb = usb_alloc_urb(0, GFP_KERNEL); -+ if (!adev->usb_tx[i].urb) { -+ msg = "acx: no memory for output URB\n"; -+ goto end_nomem; -+ } -+ adev->usb_tx[i].urb->status = 0; -+ adev->usb_tx[i].adev = adev; -+ adev->usb_tx[i].busy = 0; -+ } -+ adev->tx_free = ACX_TX_URB_CNT; -+ -+ usb_set_intfdata(intf, adev); -+ SET_NETDEV_DEV(ndev, &intf->dev); -+ -+ /* TODO: move all of fw cmds to open()? But then we won't know our MAC addr -+ until ifup (it's available via reading ACX1xx_IE_DOT11_STATION_ID)... */ -+ -+ /* put acx out of sleep mode and initialize it */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); -+ -+ result = acx_s_init_mac(adev); -+ if (result) -+ goto end; -+ -+ /* TODO: see similar code in pci.c */ -+ acxusb_s_read_eeprom_version(adev); -+ acxusb_s_fill_configoption(adev); -+ acx_s_set_defaults(adev); -+ acx_s_get_firmware_version(adev); -+ acx_display_hardware_details(adev); -+ -+ /* Register the network device */ -+ log(L_INIT, "registering network device\n"); -+ result = register_netdev(ndev); -+ if (result) { -+ msg = "acx: failed to register USB network device " -+ "(error %d)\n"; -+ goto end_nomem; -+ } -+ -+ acx_proc_register_entries(ndev); -+ -+ acx_stop_queue(ndev, "on probe"); -+ acx_carrier_off(ndev, "on probe"); -+ -+ printk("acx: USB module " ACX_RELEASE " loaded successfully\n"); -+ -+#if CMD_DISCOVERY -+ great_inquisitor(adev); -+#endif -+ -+ /* Everything went OK, we are happy now */ -+ result = OK; -+ goto end; -+ -+end_nomem: -+ printk(msg, result); -+ -+ if (ndev) { -+ if (adev->usb_rx) { -+ for (i = 0; i < ACX_RX_URB_CNT; i++) -+ usb_free_urb(adev->usb_rx[i].urb); -+ kfree(adev->usb_rx); -+ } -+ if (adev->usb_tx) { -+ for (i = 0; i < ACX_TX_URB_CNT; i++) -+ usb_free_urb(adev->usb_tx[i].urb); -+ kfree(adev->usb_tx); -+ } -+ free_netdev(ndev); -+ } -+ -+ result = -ENOMEM; -+ goto end; -+ -+end_nodev: -+ /* no device we could handle, return error. */ -+ result = -EIO; -+ -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxusb_e_disconnect() -+** -+** This function is invoked whenever the user pulls the plug from the USB -+** device or the module is removed from the kernel. In these cases, the -+** network devices have to be taken down and all allocated memory has -+** to be freed. -+*/ -+static void -+acxusb_e_disconnect(struct usb_interface *intf) -+{ -+ acx_device_t *adev = usb_get_intfdata(intf); -+ unsigned long flags; -+ int i; -+ -+ FN_ENTER; -+ -+ /* No WLAN device... no sense */ -+ if (!adev) -+ goto end; -+ -+ /* Unregister network device -+ * -+ * If the interface is up, unregister_netdev() will take -+ * care of calling our close() function, which takes -+ * care of unlinking the urbs, sending the device to -+ * sleep, etc... -+ * This can't be called with sem or lock held because -+ * _close() will try to grab it as well if it's called, -+ * deadlocking the machine. -+ */ -+ unregister_netdev(adev->ndev); -+ -+ acx_sem_lock(adev); -+ acx_lock(adev, flags); -+ /* This device exists no more */ -+ usb_set_intfdata(intf, NULL); -+ acx_proc_unregister_entries(adev->ndev); -+ -+ /* -+ * Here we only free them. _close() took care of -+ * unlinking them. -+ */ -+ for (i = 0; i < ACX_RX_URB_CNT; ++i) { -+ usb_free_urb(adev->usb_rx[i].urb); -+ } -+ for (i = 0; i< ACX_TX_URB_CNT; ++i) { -+ usb_free_urb(adev->usb_tx[i].urb); -+ } -+ -+ /* Freeing containers */ -+ kfree(adev->usb_rx); -+ kfree(adev->usb_tx); -+ -+ acx_unlock(adev, flags); -+ acx_sem_unlock(adev); -+ -+ free_netdev(adev->ndev); -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxusb_e_open() -+** This function is called when the user sets up the network interface. -+** It initializes a management timer, sets up the USB card and starts -+** the network tx queue and USB receive. -+*/ -+static int -+acxusb_e_open(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ int i; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* put the ACX100 out of sleep mode */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); -+ -+ acx_init_task_scheduler(adev); -+ -+ init_timer(&adev->mgmt_timer); -+ adev->mgmt_timer.function = acx_i_timer; -+ adev->mgmt_timer.data = (unsigned long)adev; -+ -+ /* acx_s_start needs it */ -+ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ acx_s_start(adev); -+ -+ /* don't acx_start_queue() here, we need to associate first */ -+ -+ acx_lock(adev, flags); -+ for (i = 0; i < ACX_RX_URB_CNT; i++) { -+ adev->usb_rx[i].urb->status = 0; -+ } -+ -+ acxusb_l_poll_rx(adev, &adev->usb_rx[0]); -+ -+ acx_unlock(adev, flags); -+ -+ acx_sem_unlock(adev); -+ -+ FN_EXIT0; -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** acxusb_e_close() -+** -+** This function stops the network functionality of the interface (invoked -+** when the user calls ifconfig down). The tx queue is halted and -+** the device is marked as down. In case there were any pending USB bulk -+** transfers, these are unlinked (asynchronously). The module in-use count -+** is also decreased in this function. -+*/ -+static int -+acxusb_e_close(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ int i; -+ -+ FN_ENTER; -+ -+#ifdef WE_STILL_DONT_CARE_ABOUT_IT -+ /* Transmit a disassociate frame */ -+ lock -+ acx_l_transmit_disassoc(adev, &client); -+ unlock -+#endif -+ -+ acx_sem_lock(adev); -+ -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ -+/* Code below is remarkably similar to acxpci_s_down(). Maybe we can merge them? */ -+ -+ /* Make sure we don't get any more rx requests */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ -+ /* -+ * We must do FLUSH *without* holding sem to avoid a deadlock. -+ * See pci.c:acxpci_s_down() for deails. -+ */ -+ acx_sem_unlock(adev); -+ FLUSH_SCHEDULED_WORK(); -+ acx_sem_lock(adev); -+ -+ /* Power down the device */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); -+ -+ /* Stop the transmit queue, mark the device as DOWN */ -+ acx_lock(adev, flags); -+ acx_stop_queue(ndev, "on ifdown"); -+ acx_set_status(adev, ACX_STATUS_0_STOPPED); -+ /* stop pending rx/tx urb transfers */ -+ for (i = 0; i < ACX_TX_URB_CNT; i++) { -+ acxusb_unlink_urb(adev->usb_tx[i].urb); -+ adev->usb_tx[i].busy = 0; -+ } -+ for (i = 0; i < ACX_RX_URB_CNT; i++) { -+ acxusb_unlink_urb(adev->usb_rx[i].urb); -+ adev->usb_rx[i].busy = 0; -+ } -+ adev->tx_free = ACX_TX_URB_CNT; -+ acx_unlock(adev, flags); -+ -+ /* Must do this outside of lock */ -+ del_timer_sync(&adev->mgmt_timer); -+ -+ acx_sem_unlock(adev); -+ -+ FN_EXIT0; -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** acxusb_l_poll_rx -+** This function (re)initiates a bulk-in USB transfer on a given urb -+*/ -+static void -+acxusb_l_poll_rx(acx_device_t *adev, usb_rx_t* rx) -+{ -+ struct usb_device *usbdev; -+ struct urb *rxurb; -+ int errcode, rxnum; -+ unsigned int inpipe; -+ -+ FN_ENTER; -+ -+ rxurb = rx->urb; -+ usbdev = adev->usbdev; -+ -+ rxnum = rx - adev->usb_rx; -+ -+ inpipe = usb_rcvbulkpipe(usbdev, adev->bulkinep); -+ if (unlikely(rxurb->status == -EINPROGRESS)) { -+ printk(KERN_ERR "acx: error, rx triggered while rx urb in progress\n"); -+ /* FIXME: this is nasty, receive is being cancelled by this code -+ * on the other hand, this should not happen anyway... -+ */ -+ usb_unlink_urb(rxurb); -+ } else -+ if (unlikely(rxurb->status == -ECONNRESET)) { -+ log(L_USBRXTX, "acx_usb: _poll_rx: connection reset\n"); -+ goto end; -+ } -+ rxurb->actual_length = 0; -+ usb_fill_bulk_urb(rxurb, usbdev, inpipe, -+ &rx->bulkin, /* dataptr */ -+ RXBUFSIZE, /* size */ -+ acxusb_i_complete_rx, /* handler */ -+ rx /* handler param */ -+ ); -+ rxurb->transfer_flags = URB_ASYNC_UNLINK; -+ -+ /* ATOMIC: we may be called from complete_rx() usb callback */ -+ errcode = usb_submit_urb(rxurb, GFP_ATOMIC); -+ /* FIXME: evaluate the error code! */ -+ log(L_USBRXTX, "SUBMIT RX (%d) inpipe=0x%X size=%d errcode=%d\n", -+ rxnum, inpipe, (int) RXBUFSIZE, errcode); -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxusb_i_complete_rx() -+** Inputs: -+** urb -> pointer to USB request block -+** regs -> pointer to register-buffer for syscalls (see asm/ptrace.h) -+** -+** This function is invoked by USB subsystem whenever a bulk receive -+** request returns. -+** The received data is then committed to the network stack and the next -+** USB receive is triggered. -+*/ -+static void -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+acxusb_i_complete_rx(struct urb *urb) -+#else -+acxusb_i_complete_rx(struct urb *urb, struct pt_regs *regs) -+#endif -+{ -+ acx_device_t *adev; -+ rxbuffer_t *ptr; -+ rxbuffer_t *inbuf; -+ usb_rx_t *rx; -+ unsigned long flags; -+ int size, remsize, packetsize, rxnum; -+ -+ FN_ENTER; -+ -+ BUG_ON(!urb->context); -+ -+ rx = (usb_rx_t *)urb->context; -+ adev = rx->adev; -+ -+ acx_lock(adev, flags); -+ -+ /* -+ * Happens on disconnect or close. Don't play with the urb. -+ * Don't resubmit it. It will get unlinked by close() -+ */ -+ if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) { -+ log(L_USBRXTX, "rx: device is down, not doing anything\n"); -+ goto end_unlock; -+ } -+ -+ inbuf = &rx->bulkin; -+ size = urb->actual_length; -+ remsize = size; -+ rxnum = rx - adev->usb_rx; -+ -+ log(L_USBRXTX, "RETURN RX (%d) status=%d size=%d\n", -+ rxnum, urb->status, size); -+ -+ /* Send the URB that's waiting. */ -+ log(L_USBRXTX, "rxnum=%d, sending=%d\n", rxnum, rxnum^1); -+ acxusb_l_poll_rx(adev, &adev->usb_rx[rxnum^1]); -+ -+ if (unlikely(size > sizeof(rxbuffer_t))) -+ printk("acx_usb: rx too large: %d, please report\n", size); -+ -+ /* check if the transfer was aborted */ -+ switch (urb->status) { -+ case 0: /* No error */ -+ break; -+ case -EOVERFLOW: -+ printk(KERN_ERR "acx: rx data overrun\n"); -+ adev->rxtruncsize = 0; /* Not valid anymore. */ -+ goto end_unlock; -+ case -ECONNRESET: -+ adev->rxtruncsize = 0; -+ goto end_unlock; -+ case -ESHUTDOWN: /* rmmod */ -+ adev->rxtruncsize = 0; -+ goto end_unlock; -+ default: -+ adev->rxtruncsize = 0; -+ adev->stats.rx_errors++; -+ printk("acx: rx error (urb status=%d)\n", urb->status); -+ goto end_unlock; -+ } -+ -+ if (unlikely(!size)) -+ printk("acx: warning, encountered zerolength rx packet\n"); -+ -+ if (urb->transfer_buffer != inbuf) -+ goto end_unlock; -+ -+ /* check if previous frame was truncated -+ ** FIXME: this code can only handle truncation -+ ** of consecutive packets! -+ */ -+ ptr = inbuf; -+ if (adev->rxtruncsize) { -+ int tail_size; -+ -+ ptr = &adev->rxtruncbuf; -+ packetsize = RXBUF_BYTES_USED(ptr); -+ if (acx_debug & L_USBRXTX) { -+ printk("handling truncated frame (truncsize=%d size=%d " -+ "packetsize(from trunc)=%d)\n", -+ adev->rxtruncsize, size, packetsize); -+ acx_dump_bytes(ptr, RXBUF_HDRSIZE); -+ acx_dump_bytes(inbuf, RXBUF_HDRSIZE); -+ } -+ -+ /* bytes needed for rxtruncbuf completion: */ -+ tail_size = packetsize - adev->rxtruncsize; -+ -+ if (size < tail_size) { -+ /* there is not enough data to complete this packet, -+ ** simply append the stuff to the truncation buffer -+ */ -+ memcpy(((char *)ptr) + adev->rxtruncsize, inbuf, size); -+ adev->rxtruncsize += size; -+ remsize = 0; -+ } else { -+ /* ok, this data completes the previously -+ ** truncated packet. copy it into a descriptor -+ ** and give it to the rest of the stack */ -+ -+ /* append tail to previously truncated part -+ ** NB: adev->rxtruncbuf (pointed to by ptr) can't -+ ** overflow because this is already checked before -+ ** truncation buffer was filled. See below, -+ ** "if (packetsize > sizeof(rxbuffer_t))..." code */ -+ memcpy(((char *)ptr) + adev->rxtruncsize, inbuf, tail_size); -+ -+ if (acx_debug & L_USBRXTX) { -+ printk("full trailing packet + 12 bytes:\n"); -+ acx_dump_bytes(inbuf, tail_size + RXBUF_HDRSIZE); -+ } -+ acx_l_process_rxbuf(adev, ptr); -+ adev->rxtruncsize = 0; -+ ptr = (rxbuffer_t *) (((char *)inbuf) + tail_size); -+ remsize -= tail_size; -+ } -+ log(L_USBRXTX, "post-merge size=%d remsize=%d\n", -+ size, remsize); -+ } -+ -+ /* size = USB data block size -+ ** remsize = unprocessed USB bytes left -+ ** ptr = current pos in USB data block -+ */ -+ while (remsize) { -+ if (remsize < RXBUF_HDRSIZE) { -+ printk("acx: truncated rx header (%d bytes)!\n", -+ remsize); -+ if (ACX_DEBUG) -+ acx_dump_bytes(ptr, remsize); -+ break; -+ } -+ -+ packetsize = RXBUF_BYTES_USED(ptr); -+ log(L_USBRXTX, "packet with packetsize=%d\n", packetsize); -+ -+ if (RXBUF_IS_TXSTAT(ptr)) { -+ /* do rate handling */ -+ usb_txstatus_t *stat = (void*)ptr; -+ u16 client_no = (u16)stat->hostdata; -+ -+ log(L_USBRXTX, "tx: stat: mac_cnt_rcvd:%04X " -+ "queue_index:%02X mac_status:%02X hostdata:%08X " -+ "rate:%u ack_failures:%02X rts_failures:%02X " -+ "rts_ok:%02X\n", -+ stat->mac_cnt_rcvd, -+ stat->queue_index, stat->mac_status, stat->hostdata, -+ stat->rate, stat->ack_failures, stat->rts_failures, -+ stat->rts_ok); -+ -+ if (adev->rate_auto && client_no < VEC_SIZE(adev->sta_list)) { -+ client_t *clt = &adev->sta_list[client_no]; -+ u16 cur = stat->hostdata >> 16; -+ -+ if (clt && clt->rate_cur == cur) { -+ acx_l_handle_txrate_auto(adev, clt, -+ cur, /* intended rate */ -+ stat->rate, 0, /* actually used rate */ -+ stat->mac_status, /* error? */ -+ ACX_TX_URB_CNT - adev->tx_free); -+ } -+ } -+ goto next; -+ } -+ -+ if (packetsize > sizeof(rxbuffer_t)) { -+ printk("acx: packet exceeds max wlan " -+ "frame size (%d > %d). size=%d\n", -+ packetsize, (int) sizeof(rxbuffer_t), size); -+ if (ACX_DEBUG) -+ acx_dump_bytes(ptr, 16); -+ /* FIXME: put some real error-handling in here! */ -+ break; -+ } -+ -+ if (packetsize > remsize) { -+ /* frame truncation handling */ -+ if (acx_debug & L_USBRXTX) { -+ printk("need to truncate packet, " -+ "packetsize=%d remsize=%d " -+ "size=%d bytes:", -+ packetsize, remsize, size); -+ acx_dump_bytes(ptr, RXBUF_HDRSIZE); -+ } -+ memcpy(&adev->rxtruncbuf, ptr, remsize); -+ adev->rxtruncsize = remsize; -+ break; -+ } -+ -+ /* packetsize <= remsize */ -+ /* now handle the received data */ -+ acx_l_process_rxbuf(adev, ptr); -+next: -+ ptr = (rxbuffer_t *)(((char *)ptr) + packetsize); -+ remsize -= packetsize; -+ if ((acx_debug & L_USBRXTX) && remsize) { -+ printk("more than one packet in buffer, " -+ "second packet hdr:"); -+ acx_dump_bytes(ptr, RXBUF_HDRSIZE); -+ } -+ } -+ -+end_unlock: -+ acx_unlock(adev, flags); -+/* end: */ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxusb_i_complete_tx() -+** Inputs: -+** urb -> pointer to USB request block -+** regs -> pointer to register-buffer for syscalls (see asm/ptrace.h) -+** -+** This function is invoked upon termination of a USB transfer. -+*/ -+static void -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+acxusb_i_complete_tx(struct urb *urb) -+#else -+acxusb_i_complete_tx(struct urb *urb, struct pt_regs *regs) -+#endif -+{ -+ acx_device_t *adev; -+ usb_tx_t *tx; -+ unsigned long flags; -+ int txnum; -+ -+ FN_ENTER; -+ -+ BUG_ON(!urb->context); -+ -+ tx = (usb_tx_t *)urb->context; -+ adev = tx->adev; -+ -+ txnum = tx - adev->usb_tx; -+ -+ acx_lock(adev, flags); -+ -+ /* -+ * If the iface isn't up, we don't have any right -+ * to play with them. The urb may get unlinked. -+ */ -+ if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) { -+ log(L_USBRXTX, "tx: device is down, not doing anything\n"); -+ goto end_unlock; -+ } -+ -+ log(L_USBRXTX, "RETURN TX (%d): status=%d size=%d\n", -+ txnum, urb->status, urb->actual_length); -+ -+ /* handle USB transfer errors */ -+ switch (urb->status) { -+ case 0: /* No error */ -+ break; -+ case -ESHUTDOWN: -+ goto end_unlock; -+ break; -+ case -ECONNRESET: -+ goto end_unlock; -+ break; -+ /* FIXME: real error-handling code here please */ -+ default: -+ printk(KERN_ERR "acx: tx error, urb status=%d\n", urb->status); -+ /* FIXME: real error-handling code here please */ -+ } -+ -+ /* free the URB and check for more data */ -+ tx->busy = 0; -+ adev->tx_free++; -+ if ((adev->tx_free >= TX_START_QUEUE) -+ && (adev->status == ACX_STATUS_4_ASSOCIATED) -+ && (acx_queue_stopped(adev->ndev)) -+ ) { -+ log(L_BUF, "tx: wake queue (%u free txbufs)\n", -+ adev->tx_free); -+ acx_wake_queue(adev->ndev, NULL); -+ } -+ -+end_unlock: -+ acx_unlock(adev, flags); -+/* end: */ -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxusb_l_alloc_tx -+** Actually returns a usb_tx_t* ptr -+*/ -+tx_t* -+acxusb_l_alloc_tx(acx_device_t *adev) -+{ -+ usb_tx_t *tx; -+ unsigned head; -+ -+ FN_ENTER; -+ -+ head = adev->tx_head; -+ do { -+ head = (head + 1) % ACX_TX_URB_CNT; -+ if (!adev->usb_tx[head].busy) { -+ log(L_USBRXTX, "allocated tx %d\n", head); -+ tx = &adev->usb_tx[head]; -+ tx->busy = 1; -+ adev->tx_free--; -+ /* Keep a few free descs between head and tail of tx ring. -+ ** It is not absolutely needed, just feels safer */ -+ if (adev->tx_free < TX_STOP_QUEUE) { -+ log(L_BUF, "tx: stop queue " -+ "(%u free txbufs)\n", adev->tx_free); -+ acx_stop_queue(adev->ndev, NULL); -+ } -+ goto end; -+ } -+ } while (likely(head!=adev->tx_head)); -+ tx = NULL; -+ printk_ratelimited("acx: tx buffers full\n"); -+end: -+ adev->tx_head = head; -+ FN_EXIT0; -+ return (tx_t*)tx; -+} -+ -+ -+/*************************************************************** -+** Used if alloc_tx()'ed buffer needs to be cancelled without doing tx -+*/ -+void -+acxusb_l_dealloc_tx(tx_t *tx_opaque) -+{ -+ usb_tx_t* tx = (usb_tx_t*)tx_opaque; -+ tx->busy = 0; -+} -+ -+ -+/*************************************************************** -+*/ -+void* -+acxusb_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) -+{ -+ usb_tx_t* tx = (usb_tx_t*)tx_opaque; -+ return &tx->bulkout.data; -+} -+ -+ -+/*************************************************************** -+** acxusb_l_tx_data -+** -+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). -+** Can be called from acx_i_start_xmit (data frames from net core). -+*/ -+void -+acxusb_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int wlanpkt_len) -+{ -+ struct usb_device *usbdev; -+ struct urb* txurb; -+ usb_tx_t* tx; -+ usb_txbuffer_t* txbuf; -+ client_t *clt; -+ wlan_hdr_t* whdr; -+ unsigned int outpipe; -+ int ucode, txnum; -+ -+ FN_ENTER; -+ -+ tx = ((usb_tx_t *)tx_opaque); -+ txurb = tx->urb; -+ txbuf = &tx->bulkout; -+ whdr = (wlan_hdr_t *)txbuf->data; -+ txnum = tx - adev->usb_tx; -+ -+ log(L_DEBUG, "using buf#%d free=%d len=%d\n", -+ txnum, adev->tx_free, wlanpkt_len); -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ clt = acx_l_sta_list_get(adev, whdr->a1); -+ break; -+ case ACX_MODE_2_STA: -+ clt = adev->ap_client; -+ break; -+ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ -+ clt = NULL; -+ break; -+ } -+ -+ if (unlikely(clt && !clt->rate_cur)) { -+ printk("acx: driver bug! bad ratemask\n"); -+ goto end; -+ } -+ -+ /* fill the USB transfer header */ -+ txbuf->desc = cpu_to_le16(USB_TXBUF_TXDESC); -+ txbuf->mpdu_len = cpu_to_le16(wlanpkt_len); -+ txbuf->queue_index = 1; -+ if (clt) { -+ txbuf->rate = clt->rate_100; -+ txbuf->hostdata = (clt - adev->sta_list) | (clt->rate_cur << 16); -+ } else { -+ txbuf->rate = adev->rate_bcast100; -+ txbuf->hostdata = ((u16)-1) | (adev->rate_bcast << 16); -+ } -+ txbuf->ctrl1 = DESC_CTL_FIRSTFRAG; -+ if (1 == adev->preamble_cur) -+ SET_BIT(txbuf->ctrl1, DESC_CTL_SHORT_PREAMBLE); -+ txbuf->ctrl2 = 0; -+ txbuf->data_len = cpu_to_le16(wlanpkt_len); -+ -+ if (unlikely(acx_debug & L_DATA)) { -+ printk("dump of bulk out urb:\n"); -+ acx_dump_bytes(txbuf, wlanpkt_len + USB_TXBUF_HDRSIZE); -+ } -+ -+ if (unlikely(txurb->status == -EINPROGRESS)) { -+ printk("acx: trying to submit tx urb while already in progress\n"); -+ } -+ -+ /* now schedule the USB transfer */ -+ usbdev = adev->usbdev; -+ outpipe = usb_sndbulkpipe(usbdev, adev->bulkoutep); -+ -+ usb_fill_bulk_urb(txurb, usbdev, outpipe, -+ txbuf, /* dataptr */ -+ wlanpkt_len + USB_TXBUF_HDRSIZE, /* size */ -+ acxusb_i_complete_tx, /* handler */ -+ tx /* handler param */ -+ ); -+ -+ txurb->transfer_flags = URB_ASYNC_UNLINK|URB_ZERO_PACKET; -+ ucode = usb_submit_urb(txurb, GFP_ATOMIC); -+ log(L_USBRXTX, "SUBMIT TX (%d): outpipe=0x%X buf=%p txsize=%d " -+ "rate=%u errcode=%d\n", txnum, outpipe, txbuf, -+ wlanpkt_len + USB_TXBUF_HDRSIZE, txbuf->rate, ucode); -+ -+ if (unlikely(ucode)) { -+ printk(KERN_ERR "acx: submit_urb() error=%d txsize=%d\n", -+ ucode, wlanpkt_len + USB_TXBUF_HDRSIZE); -+ -+ /* on error, just mark the frame as done and update -+ ** the statistics -+ */ -+ adev->stats.tx_errors++; -+ tx->busy = 0; -+ adev->tx_free++; -+ /* needed? if (adev->tx_free > TX_START_QUEUE) acx_wake_queue(...) */ -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+*/ -+static void -+acxusb_i_set_rx_mode(struct net_device *ndev) -+{ -+} -+ -+ -+/*********************************************************************** -+*/ -+#ifdef HAVE_TX_TIMEOUT -+static void -+acxusb_i_tx_timeout(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ int i; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ /* unlink the URBs */ -+ for (i = 0; i < ACX_TX_URB_CNT; i++) { -+ acxusb_unlink_urb(adev->usb_tx[i].urb); -+ adev->usb_tx[i].busy = 0; -+ } -+ adev->tx_free = ACX_TX_URB_CNT; -+ /* TODO: stats update */ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+#endif -+ -+ -+/*********************************************************************** -+** init_module() -+** -+** This function is invoked upon loading of the kernel module. -+** It registers itself at the kernel's USB subsystem. -+** -+** Returns: Errorcode on failure, 0 on success -+*/ -+int __init -+acxusb_e_init_module(void) -+{ -+ log(L_INIT, "USB module " ACX_RELEASE " initialized, " -+ "probing for devices...\n"); -+ return usb_register(&acxusb_driver); -+} -+ -+ -+ -+/*********************************************************************** -+** cleanup_module() -+** -+** This function is invoked as last step of the module unloading. It simply -+** deregisters this module at the kernel's USB subsystem. -+*/ -+void __exit -+acxusb_e_cleanup_module() -+{ -+ usb_deregister(&acxusb_driver); -+} -+ -+ -+/*********************************************************************** -+** DEBUG STUFF -+*/ -+#if ACX_DEBUG -+ -+#ifdef UNUSED -+static void -+dump_device(struct usb_device *usbdev) -+{ -+ int i; -+ struct usb_config_descriptor *cd; -+ -+ printk("acx device dump:\n"); -+ printk(" devnum: %d\n", usbdev->devnum); -+ printk(" speed: %d\n", usbdev->speed); -+ printk(" tt: 0x%X\n", (unsigned int)(usbdev->tt)); -+ printk(" ttport: %d\n", (unsigned int)(usbdev->ttport)); -+ printk(" toggle[0]: 0x%X toggle[1]: 0x%X\n", (unsigned int)(usbdev->toggle[0]), (unsigned int)(usbdev->toggle[1])); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+ /* This saw a change after 2.6.10 */ -+ printk(" ep_in wMaxPacketSize: "); -+ for (i = 0; i < 16; ++i) -+ if (usbdev->ep_in[i] != NULL) -+ printk("%d:%d ", i, usbdev->ep_in[i]->desc.wMaxPacketSize); -+ printk("\n"); -+ printk(" ep_out wMaxPacketSize: "); -+ for (i = 0; i < VEC_SIZE(usbdev->ep_out); ++i) -+ if (usbdev->ep_out[i] != NULL) -+ printk("%d:%d ", i, usbdev->ep_out[i]->desc.wMaxPacketSize); -+ printk("\n"); -+#else -+ printk(" epmaxpacketin: "); -+ for (i = 0; i < 16; i++) -+ printk("%d ", usbdev->epmaxpacketin[i]); -+ printk("\n"); -+ printk(" epmaxpacketout: "); -+ for (i = 0; i < 16; i++) -+ printk("%d ", usbdev->epmaxpacketout[i]); -+ printk("\n"); -+#endif -+ printk(" parent: 0x%X\n", (unsigned int)usbdev->parent); -+ printk(" bus: 0x%X\n", (unsigned int)usbdev->bus); -+#ifdef NO_DATATYPE -+ printk(" configs: "); -+ for (i = 0; i < usbdev->descriptor.bNumConfigurations; i++) -+ printk("0x%X ", usbdev->config[i]); -+ printk("\n"); -+#endif -+ printk(" actconfig: %p\n", usbdev->actconfig); -+ dump_device_descriptor(&usbdev->descriptor); -+ -+ cd = &usbdev->config->desc; -+ dump_config_descriptor(cd); -+} -+ -+ -+/*********************************************************************** -+*/ -+static void -+dump_config_descriptor(struct usb_config_descriptor *cd) -+{ -+ printk("Configuration Descriptor:\n"); -+ if (!cd) { -+ printk("NULL\n"); -+ return; -+ } -+ printk(" bLength: %d (0x%X)\n", cd->bLength, cd->bLength); -+ printk(" bDescriptorType: %d (0x%X)\n", cd->bDescriptorType, cd->bDescriptorType); -+ printk(" bNumInterfaces: %d (0x%X)\n", cd->bNumInterfaces, cd->bNumInterfaces); -+ printk(" bConfigurationValue: %d (0x%X)\n", cd->bConfigurationValue, cd->bConfigurationValue); -+ printk(" iConfiguration: %d (0x%X)\n", cd->iConfiguration, cd->iConfiguration); -+ printk(" bmAttributes: %d (0x%X)\n", cd->bmAttributes, cd->bmAttributes); -+ /* printk(" MaxPower: %d (0x%X)\n", cd->bMaxPower, cd->bMaxPower); */ -+} -+ -+ -+static void -+dump_device_descriptor(struct usb_device_descriptor *dd) -+{ -+ printk("Device Descriptor:\n"); -+ if (!dd) { -+ printk("NULL\n"); -+ return; -+ } -+ printk(" bLength: %d (0x%X)\n", dd->bLength, dd->bLength); -+ printk(" bDescriptortype: %d (0x%X)\n", dd->bDescriptorType, dd->bDescriptorType); -+ printk(" bcdUSB: %d (0x%X)\n", dd->bcdUSB, dd->bcdUSB); -+ printk(" bDeviceClass: %d (0x%X)\n", dd->bDeviceClass, dd->bDeviceClass); -+ printk(" bDeviceSubClass: %d (0x%X)\n", dd->bDeviceSubClass, dd->bDeviceSubClass); -+ printk(" bDeviceProtocol: %d (0x%X)\n", dd->bDeviceProtocol, dd->bDeviceProtocol); -+ printk(" bMaxPacketSize0: %d (0x%X)\n", dd->bMaxPacketSize0, dd->bMaxPacketSize0); -+ printk(" idVendor: %d (0x%X)\n", dd->idVendor, dd->idVendor); -+ printk(" idProduct: %d (0x%X)\n", dd->idProduct, dd->idProduct); -+ printk(" bcdDevice: %d (0x%X)\n", dd->bcdDevice, dd->bcdDevice); -+ printk(" iManufacturer: %d (0x%X)\n", dd->iManufacturer, dd->iManufacturer); -+ printk(" iProduct: %d (0x%X)\n", dd->iProduct, dd->iProduct); -+ printk(" iSerialNumber: %d (0x%X)\n", dd->iSerialNumber, dd->iSerialNumber); -+ printk(" bNumConfigurations: %d (0x%X)\n", dd->bNumConfigurations, dd->bNumConfigurations); -+} -+#endif /* UNUSED */ -+ -+#endif /* ACX_DEBUG */ -Index: linux-2.6.22/drivers/net/wireless/acx/wlan.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/wlan.c 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,424 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** This code is based on elements which are -+** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -+** info@linux-wlan.com -+** http://www.linux-wlan.com -+*/ -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+#include -+#include -+#include -+#include -+ -+#include "acx.h" -+ -+ -+/*********************************************************************** -+*/ -+#define LOG_BAD_EID(hdr,len,ie_ptr) acx_log_bad_eid(hdr, len, ((wlan_ie_t*)ie_ptr)) -+ -+#define IE_EID(ie_ptr) (((wlan_ie_t*)(ie_ptr))->eid) -+#define IE_LEN(ie_ptr) (((wlan_ie_t*)(ie_ptr))->len) -+#define OFFSET(hdr,off) (WLAN_HDR_A3_DATAP(hdr) + (off)) -+ -+ -+/*********************************************************************** -+** wlan_mgmt_decode_XXX -+** -+** Given a complete frame in f->hdr, sets the pointers in f to -+** the areas that correspond to the parts of the frame. -+** -+** Assumptions: -+** 1) f->len and f->hdr are already set -+** 2) f->len is the length of the MAC header + data, the FCS -+** is NOT included -+** 3) all members except len and hdr are zero -+** Arguments: -+** f frame structure -+** -+** Returns: -+** nothing -+** -+** Side effects: -+** frame structure members are pointing at their -+** respective portions of the frame buffer. -+*/ -+void -+wlan_mgmt_decode_beacon(wlan_fr_beacon_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ f->type = WLAN_FSTYPE_BEACON; -+ -+ /*-- Fixed Fields ----*/ -+ f->ts = (u64 *) OFFSET(f->hdr, WLAN_BEACON_OFF_TS); -+ f->bcn_int = (u16 *) OFFSET(f->hdr, WLAN_BEACON_OFF_BCN_INT); -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_BEACON_OFF_CAPINFO); -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_BEACON_OFF_SSID); -+ while (ie_ptr < end) { -+ switch (IE_EID(ie_ptr)) { -+ case WLAN_EID_SSID: -+ f->ssid = (wlan_ie_ssid_t *) ie_ptr; -+ break; -+ case WLAN_EID_SUPP_RATES: -+ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_EXT_RATES: -+ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_FH_PARMS: -+ f->fh_parms = (wlan_ie_fh_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_DS_PARMS: -+ f->ds_parms = (wlan_ie_ds_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_CF_PARMS: -+ f->cf_parms = (wlan_ie_cf_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_IBSS_PARMS: -+ f->ibss_parms = (wlan_ie_ibss_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_TIM: -+ f->tim = (wlan_ie_tim_t *) ie_ptr; -+ break; -+ case WLAN_EID_ERP_INFO: -+ f->erp = (wlan_ie_erp_t *) ie_ptr; -+ break; -+ -+ case WLAN_EID_COUNTRY: -+ /* was seen: 07 06 47 42 20 01 0D 14 */ -+ case WLAN_EID_PWR_CONSTRAINT: -+ /* was seen by Ashwin Mansinghka from -+ Atheros-based PCI card in AP mode using madwifi drivers: */ -+ /* 20 01 00 */ -+ case WLAN_EID_NONERP: -+ /* was seen from WRT54GS with OpenWrt: 2F 01 07 */ -+ case WLAN_EID_UNKNOWN128: -+ /* was seen by Jacek Jablonski from Orinoco AP */ -+ /* 80 06 00 60 1D 2C 3B 00 */ -+ case WLAN_EID_UNKNOWN133: -+ /* was seen by David Bronaugh from ???? */ -+ /* 85 1E 00 00 84 12 07 00 FF 00 11 00 61 70 63 31 */ -+ /* 63 73 72 30 34 32 00 00 00 00 00 00 00 00 00 25 */ -+ case WLAN_EID_UNKNOWN223: -+ /* was seen by Carlos Martin from ???? */ -+ /* DF 20 01 1E 04 00 00 00 06 63 09 02 FF 0F 30 30 */ -+ /* 30 42 36 42 33 34 30 39 46 31 00 00 00 00 00 00 00 00 */ -+ case WLAN_EID_GENERIC: -+ /* WPA: hostap code: -+ if (pos[1] >= 4 && -+ pos[2] == 0x00 && pos[3] == 0x50 && -+ pos[4] == 0xf2 && pos[5] == 1) { -+ wpa = pos; -+ wpa_len = pos[1] + 2; -+ } -+ TI x4 mode: seen DD 04 08 00 28 00 -+ (08 00 28 is TI's OUI) -+ last byte is probably 0/1 - disabled/enabled -+ */ -+ case WLAN_EID_RSN: -+ /* hostap does something with it: -+ rsn = pos; -+ rsn_len = pos[1] + 2; -+ */ -+ break; -+ -+ default: -+ LOG_BAD_EID(f->hdr, f->len, ie_ptr); -+ break; -+ } -+ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); -+ } -+} -+ -+ -+#ifdef UNUSED -+void wlan_mgmt_decode_ibssatim(wlan_fr_ibssatim_t * f) -+{ -+ f->type = WLAN_FSTYPE_ATIM; -+ /*-- Fixed Fields ----*/ -+ /*-- Information elements */ -+} -+#endif /* UNUSED */ -+ -+void -+wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t * f) -+{ -+ f->type = WLAN_FSTYPE_DISASSOC; -+ -+ /*-- Fixed Fields ----*/ -+ f->reason = (u16 *) OFFSET(f->hdr, WLAN_DISASSOC_OFF_REASON); -+ -+ /*-- Information elements */ -+} -+ -+ -+void -+wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ -+ f->type = WLAN_FSTYPE_ASSOCREQ; -+ -+ /*-- Fixed Fields ----*/ -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_CAP_INFO); -+ f->listen_int = (u16 *) OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_LISTEN_INT); -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_SSID); -+ while (ie_ptr < end) { -+ switch (IE_EID(ie_ptr)) { -+ case WLAN_EID_SSID: -+ f->ssid = (wlan_ie_ssid_t *) ie_ptr; -+ break; -+ case WLAN_EID_SUPP_RATES: -+ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_EXT_RATES: -+ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ default: -+ LOG_BAD_EID(f->hdr, f->len, ie_ptr); -+ break; -+ } -+ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); -+ } -+} -+ -+ -+void -+wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t * f) -+{ -+ f->type = WLAN_FSTYPE_ASSOCRESP; -+ -+ /*-- Fixed Fields ----*/ -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_CAP_INFO); -+ f->status = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_STATUS); -+ f->aid = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_AID); -+ -+ /*-- Information elements */ -+ f->supp_rates = (wlan_ie_supp_rates_t *) -+ OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_SUPP_RATES); -+} -+ -+ -+#ifdef UNUSED -+void -+wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ f->type = WLAN_FSTYPE_REASSOCREQ; -+ -+ /*-- Fixed Fields ----*/ -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_CAP_INFO); -+ f->listen_int = (u16 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_LISTEN_INT); -+ f->curr_ap = (u8 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_CURR_AP); -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_SSID); -+ while (ie_ptr < end) { -+ switch (IE_EID(ie_ptr)) { -+ case WLAN_EID_SSID: -+ f->ssid = (wlan_ie_ssid_t *) ie_ptr; -+ break; -+ case WLAN_EID_SUPP_RATES: -+ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_EXT_RATES: -+ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ default: -+ LOG_BAD_EID(f->hdr, f->len, ie_ptr); -+ break; -+ } -+ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); -+ } -+} -+ -+ -+void -+wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t * f) -+{ -+ f->type = WLAN_FSTYPE_REASSOCRESP; -+ -+ /*-- Fixed Fields ----*/ -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_CAP_INFO); -+ f->status = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_STATUS); -+ f->aid = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_AID); -+ -+ /*-- Information elements */ -+ f->supp_rates = (wlan_ie_supp_rates_t *) -+ OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_SUPP_RATES); -+} -+ -+ -+void -+wlan_mgmt_decode_probereq(wlan_fr_probereq_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ f->type = WLAN_FSTYPE_PROBEREQ; -+ -+ /*-- Fixed Fields ----*/ -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_PROBEREQ_OFF_SSID); -+ while (ie_ptr < end) { -+ switch (IE_EID(ie_ptr)) { -+ case WLAN_EID_SSID: -+ f->ssid = (wlan_ie_ssid_t *) ie_ptr; -+ break; -+ case WLAN_EID_SUPP_RATES: -+ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_EXT_RATES: -+ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ default: -+ LOG_BAD_EID(f->hdr, f->len, ie_ptr); -+ break; -+ } -+ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); -+ } -+} -+#endif /* UNUSED */ -+ -+ -+/* TODO: decoding of beacon and proberesp can be merged (similar structure) */ -+void -+wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ f->type = WLAN_FSTYPE_PROBERESP; -+ -+ /*-- Fixed Fields ----*/ -+ f->ts = (u64 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_TS); -+ f->bcn_int = (u16 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_BCN_INT); -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_CAP_INFO); -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_PROBERESP_OFF_SSID); -+ while (ie_ptr < end) { -+ switch (IE_EID(ie_ptr)) { -+ case WLAN_EID_SSID: -+ f->ssid = (wlan_ie_ssid_t *) ie_ptr; -+ break; -+ case WLAN_EID_SUPP_RATES: -+ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_EXT_RATES: -+ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_FH_PARMS: -+ f->fh_parms = (wlan_ie_fh_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_DS_PARMS: -+ f->ds_parms = (wlan_ie_ds_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_CF_PARMS: -+ f->cf_parms = (wlan_ie_cf_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_IBSS_PARMS: -+ f->ibss_parms = (wlan_ie_ibss_parms_t *) ie_ptr; -+ break; -+#ifdef DONT_DO_IT_ADD_REAL_HANDLING_INSTEAD -+ case WLAN_EID_COUNTRY: -+ break; -+ ... -+#endif -+#ifdef SENT_HERE_BY_OPENWRT -+ /* should those be trapped or handled?? */ -+ case WLAN_EID_ERP_INFO: -+ break; -+ case WLAN_EID_NONERP: -+ break; -+ case WLAN_EID_GENERIC: -+ break; -+#endif -+ default: -+ LOG_BAD_EID(f->hdr, f->len, ie_ptr); -+ break; -+ } -+ -+ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); -+ } -+} -+ -+ -+void -+wlan_mgmt_decode_authen(wlan_fr_authen_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ f->type = WLAN_FSTYPE_AUTHEN; -+ -+ /*-- Fixed Fields ----*/ -+ f->auth_alg = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_AUTH_ALG); -+ f->auth_seq = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_AUTH_SEQ); -+ f->status = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_STATUS); -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_AUTHEN_OFF_CHALLENGE); -+ if ((ie_ptr < end) && (IE_EID(ie_ptr) == WLAN_EID_CHALLENGE)) { -+ f->challenge = (wlan_ie_challenge_t *) ie_ptr; -+ } -+} -+ -+ -+void -+wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t * f) -+{ -+ f->type = WLAN_FSTYPE_DEAUTHEN; -+ -+ /*-- Fixed Fields ----*/ -+ f->reason = (u16 *) OFFSET(f->hdr, WLAN_DEAUTHEN_OFF_REASON); -+ -+ /*-- Information elements */ -+} -Index: linux-2.6.22/drivers/net/wireless/acx/wlan_compat.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/wlan_compat.h 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,260 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** This code is based on elements which are -+** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -+** info@linux-wlan.com -+** http://www.linux-wlan.com -+*/ -+ -+/*=============================================================*/ -+/*------ Establish Platform Identity --------------------------*/ -+/*=============================================================*/ -+/* Key macros: */ -+/* WLAN_CPU_FAMILY */ -+#define WLAN_Ix86 1 -+#define WLAN_PPC 2 -+#define WLAN_Ix96 3 -+#define WLAN_ARM 4 -+#define WLAN_ALPHA 5 -+#define WLAN_MIPS 6 -+#define WLAN_HPPA 7 -+#define WLAN_SPARC 8 -+#define WLAN_SH 9 -+#define WLAN_x86_64 10 -+/* WLAN_CPU_CORE */ -+#define WLAN_I386CORE 1 -+#define WLAN_PPCCORE 2 -+#define WLAN_I296 3 -+#define WLAN_ARMCORE 4 -+#define WLAN_ALPHACORE 5 -+#define WLAN_MIPSCORE 6 -+#define WLAN_HPPACORE 7 -+/* WLAN_CPU_PART */ -+#define WLAN_I386PART 1 -+#define WLAN_MPC860 2 -+#define WLAN_MPC823 3 -+#define WLAN_I296SA 4 -+#define WLAN_PPCPART 5 -+#define WLAN_ARMPART 6 -+#define WLAN_ALPHAPART 7 -+#define WLAN_MIPSPART 8 -+#define WLAN_HPPAPART 9 -+/* WLAN_SYSARCH */ -+#define WLAN_PCAT 1 -+#define WLAN_MBX 2 -+#define WLAN_RPX 3 -+#define WLAN_LWARCH 4 -+#define WLAN_PMAC 5 -+#define WLAN_SKIFF 6 -+#define WLAN_BITSY 7 -+#define WLAN_ALPHAARCH 7 -+#define WLAN_MIPSARCH 9 -+#define WLAN_HPPAARCH 10 -+/* WLAN_HOSTIF (generally set on the command line, not detected) */ -+#define WLAN_PCMCIA 1 -+#define WLAN_ISA 2 -+#define WLAN_PCI 3 -+#define WLAN_USB 4 -+#define WLAN_PLX 5 -+ -+/* Note: the PLX HOSTIF above refers to some vendors implementations for */ -+/* PCI. It's a PLX chip that is a PCI to PCMCIA adapter, but it */ -+/* isn't a real PCMCIA host interface adapter providing all the */ -+/* card&socket services. */ -+ -+#ifdef __powerpc__ -+#ifndef __ppc__ -+#define __ppc__ -+#endif -+#endif -+ -+#if (defined(CONFIG_PPC) || defined(CONFIG_8xx)) -+#ifndef __ppc__ -+#define __ppc__ -+#endif -+#endif -+ -+#if defined(__x86_64__) -+ #define WLAN_CPU_FAMILY WLAN_x86_64 -+ #define WLAN_SYSARCH WLAN_PCAT -+#elif defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__) -+ #define WLAN_CPU_FAMILY WLAN_Ix86 -+ #define WLAN_CPU_CORE WLAN_I386CORE -+ #define WLAN_CPU_PART WLAN_I386PART -+ #define WLAN_SYSARCH WLAN_PCAT -+#elif defined(__ppc__) -+ #define WLAN_CPU_FAMILY WLAN_PPC -+ #define WLAN_CPU_CORE WLAN_PPCCORE -+ #if defined(CONFIG_MBX) -+ #define WLAN_CPU_PART WLAN_MPC860 -+ #define WLAN_SYSARCH WLAN_MBX -+ #elif defined(CONFIG_RPXLITE) -+ #define WLAN_CPU_PART WLAN_MPC823 -+ #define WLAN_SYSARCH WLAN_RPX -+ #elif defined(CONFIG_RPXCLASSIC) -+ #define WLAN_CPU_PART WLAN_MPC860 -+ #define WLAN_SYSARCH WLAN_RPX -+ #else -+ #define WLAN_CPU_PART WLAN_PPCPART -+ #define WLAN_SYSARCH WLAN_PMAC -+ #endif -+#elif defined(__arm__) -+ #define WLAN_CPU_FAMILY WLAN_ARM -+ #define WLAN_CPU_CORE WLAN_ARMCORE -+ #define WLAN_CPU_PART WLAN_ARM_PART -+ #define WLAN_SYSARCH WLAN_SKIFF -+#elif defined(__alpha__) -+ #define WLAN_CPU_FAMILY WLAN_ALPHA -+ #define WLAN_CPU_CORE WLAN_ALPHACORE -+ #define WLAN_CPU_PART WLAN_ALPHAPART -+ #define WLAN_SYSARCH WLAN_ALPHAARCH -+#elif defined(__mips__) -+ #define WLAN_CPU_FAMILY WLAN_MIPS -+ #define WLAN_CPU_CORE WLAN_MIPSCORE -+ #define WLAN_CPU_PART WLAN_MIPSPART -+ #define WLAN_SYSARCH WLAN_MIPSARCH -+#elif defined(__hppa__) -+ #define WLAN_CPU_FAMILY WLAN_HPPA -+ #define WLAN_CPU_CORE WLAN_HPPACORE -+ #define WLAN_CPU_PART WLAN_HPPAPART -+ #define WLAN_SYSARCH WLAN_HPPAARCH -+#elif defined(__sparc__) -+ #define WLAN_CPU_FAMILY WLAN_SPARC -+ #define WLAN_SYSARCH WLAN_SPARC -+#elif defined(__sh__) -+ #define WLAN_CPU_FAMILY WLAN_SH -+ #define WLAN_SYSARCH WLAN_SHARCH -+ #ifndef __LITTLE_ENDIAN__ -+ #define __LITTLE_ENDIAN__ -+ #endif -+#else -+ #error "No CPU identified!" -+#endif -+ -+/* -+ Some big endian machines implicitly do all I/O in little endian mode. -+ -+ In particular: -+ Linux/PPC on PowerMacs (PCI) -+ Arm/Intel Xscale (PCI) -+ -+ This may also affect PLX boards and other BE &| PPC platforms; -+ as new ones are discovered, add them below. -+*/ -+ -+#if ((WLAN_SYSARCH == WLAN_SKIFF) || (WLAN_SYSARCH == WLAN_PMAC)) -+#define REVERSE_ENDIAN -+#endif -+ -+/*=============================================================*/ -+/*------ Hardware Portability Macros --------------------------*/ -+/*=============================================================*/ -+#if (WLAN_CPU_FAMILY == WLAN_PPC) -+#define wlan_inw(a) in_be16((unsigned short *)((a)+_IO_BASE)) -+#define wlan_inw_le16_to_cpu(a) inw((a)) -+#define wlan_outw(v,a) out_be16((unsigned short *)((a)+_IO_BASE), (v)) -+#define wlan_outw_cpu_to_le16(v,a) outw((v),(a)) -+#else -+#define wlan_inw(a) inw((a)) -+#define wlan_inw_le16_to_cpu(a) __cpu_to_le16(inw((a))) -+#define wlan_outw(v,a) outw((v),(a)) -+#define wlan_outw_cpu_to_le16(v,a) outw(__cpu_to_le16((v)),(a)) -+#endif -+ -+/*=============================================================*/ -+/*------ Bit settings -----------------------------------------*/ -+/*=============================================================*/ -+#define ieee2host16(n) __le16_to_cpu(n) -+#define ieee2host32(n) __le32_to_cpu(n) -+#define host2ieee16(n) __cpu_to_le16(n) -+#define host2ieee32(n) __cpu_to_le32(n) -+ -+/* for constants */ -+#ifdef __LITTLE_ENDIAN -+ #define IEEE16(a,n) a = n, a##i = n, -+#else -+ #ifdef __BIG_ENDIAN -+ /* shifts would produce gcc warnings. Oh well... */ -+ #define IEEE16(a,n) a = n, a##i = ((n&0xff)*256 + ((n&0xff00)/256)), -+ #else -+ #error give me endianness or give me death -+ #endif -+#endif -+ -+/*=============================================================*/ -+/*------ Compiler Portability Macros --------------------------*/ -+/*=============================================================*/ -+#define WLAN_PACKED __attribute__ ((packed)) -+ -+/* Interrupt handler backwards compatibility stuff */ -+#ifndef IRQ_NONE -+#define IRQ_NONE -+#define IRQ_HANDLED -+typedef void irqreturn_t; -+#endif -+ -+#ifndef ARPHRD_IEEE80211_PRISM -+#define ARPHRD_IEEE80211_PRISM 802 -+#endif -+ -+#define ETH_P_80211_RAW (ETH_P_ECONET + 1) -+ -+/*============================================================================* -+ * Constants * -+ *============================================================================*/ -+#define WLAN_IEEE_OUI_LEN 3 -+ -+/*============================================================================* -+ * Types * -+ *============================================================================*/ -+ -+/* local ether header type */ -+typedef struct wlan_ethhdr { -+ u8 daddr[ETH_ALEN]; -+ u8 saddr[ETH_ALEN]; -+ u16 type; -+} WLAN_PACKED wlan_ethhdr_t; -+ -+/* local llc header type */ -+typedef struct wlan_llc { -+ u8 dsap; -+ u8 ssap; -+ u8 ctl; -+} WLAN_PACKED wlan_llc_t; -+ -+/* local snap header type */ -+typedef struct wlan_snap { -+ u8 oui[WLAN_IEEE_OUI_LEN]; -+ u16 type; -+} WLAN_PACKED wlan_snap_t; -Index: linux-2.6.22/drivers/net/wireless/acx/wlan_hdr.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/wlan_hdr.h 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,497 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** This code is based on elements which are -+** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -+** info@linux-wlan.com -+** http://www.linux-wlan.com -+*/ -+ -+/* mini-doc -+ -+Here are all 11b/11g/11a rates and modulations: -+ -+ 11b 11g 11a -+ --- --- --- -+ 1 |B |B | -+ 2 |Q |Q | -+ 5.5|Cp |C p| -+ 6 | |Od |O -+ 9 | |od |o -+11 |Cp |C p| -+12 | |Od |O -+18 | |od |o -+22 | | p| -+24 | |Od |O -+33 | | p| -+36 | |od |o -+48 | |od |o -+54 | |od |o -+ -+Mandatory: -+ B - DBPSK (Differential Binary Phase Shift Keying) -+ Q - DQPSK (Differential Quaternary Phase Shift Keying) -+ C - CCK (Complementary Code Keying, a form of DSSS -+ (Direct Sequence Spread Spectrum) modulation) -+ O - OFDM (Orthogonal Frequency Division Multiplexing) -+Optional: -+ o - OFDM -+ d - CCK-OFDM (also known as DSSS-OFDM) -+ p - PBCC (Packet Binary Convolutional Coding) -+ -+The term CCK-OFDM may be used interchangeably with DSSS-OFDM -+(the IEEE 802.11g-2003 standard uses the latter terminology). -+In the CCK-OFDM, the PLCP header of the frame uses the CCK form of DSSS, -+while the PLCP payload (the MAC frame) is modulated using OFDM. -+ -+Basically, you must use CCK-OFDM if you have mixed 11b/11g environment, -+or else (pure OFDM) 11b equipment may not realize that AP -+is sending a packet and start sending its own one. -+Sadly, looks like acx111 does not support CCK-OFDM, only pure OFDM. -+ -+Re PBCC: avoid using it. It makes sense only if you have -+TI "11b+" hardware. You _must_ use PBCC in order to reach 22Mbps on it. -+ -+Preambles: -+ -+Long preamble (at 1Mbit rate, takes 144 us): -+ 16 bytes ones -+ 2 bytes 0xF3A0 (lsb sent first) -+PLCP header follows (at 1Mbit also): -+ 1 byte Signal: speed, in 0.1Mbit units, except for: -+ 33Mbit: 33 (instead of 330 - doesn't fit in octet) -+ all CCK-OFDM rates: 30 -+ 1 byte Service -+ 0,1,4: reserved -+ 2: 1=locked clock -+ 3: 1=PBCC -+ 5: Length Extension (PBCC 22,33Mbit (11g only)) <- -+ 6: Length Extension (PBCC 22,33Mbit (11g only)) <- BLACK MAGIC HERE -+ 7: Length Extension <- -+ 2 bytes Length (time needed to tx this frame) -+ a) 5.5 Mbit/s CCK -+ Length = octets*8/5.5, rounded up to integer -+ b) 11 Mbit/s CCK -+ Length = octets*8/11, rounded up to integer -+ Service bit 7: -+ 0 = rounding took less than 8/11 -+ 1 = rounding took more than or equal to 8/11 -+ c) 5.5 Mbit/s PBCC -+ Length = (octets+1)*8/5.5, rounded up to integer -+ d) 11 Mbit/s PBCC -+ Length = (octets+1)*8/11, rounded up to integer -+ Service bit 7: -+ 0 = rounding took less than 8/11 -+ 1 = rounding took more than or equal to 8/11 -+ e) 22 Mbit/s PBCC -+ Length = (octets+1)*8/22, rounded up to integer -+ Service bits 6,7: -+ 00 = rounding took less than 8/22ths -+ 01 = rounding took 8/22...15/22ths -+ 10 = rounding took 16/22ths or more. -+ f) 33 Mbit/s PBCC -+ Length = (octets+1)*8/33, rounded up to integer -+ Service bits 5,6,7: -+ 000 rounding took less than 8/33 -+ 001 rounding took 8/33...15/33 -+ 010 rounding took 16/33...23/33 -+ 011 rounding took 24/33...31/33 -+ 100 rounding took 32/33 or more -+ 2 bytes CRC -+ -+PSDU follows (up to 2346 bytes at selected rate) -+ -+While Signal value alone is not enough to determine rate and modulation, -+Signal+Service is always sufficient. -+ -+Short preamble (at 1Mbit rate, takes 72 us): -+ 7 bytes zeroes -+ 2 bytes 0x05CF (lsb sent first) -+PLCP header follows *at 2Mbit/s*. Format is the same as in long preamble. -+PSDU follows (up to 2346 bytes at selected rate) -+ -+OFDM preamble is completely different, uses OFDM -+modulation from the start and thus easily identifiable. -+Not shown here. -+*/ -+ -+ -+/*********************************************************************** -+** Constants -+*/ -+ -+#define WLAN_HDR_A3_LEN 24 -+#define WLAN_HDR_A4_LEN 30 -+/* IV structure: -+** 3 bytes: Initialization Vector (24 bits) -+** 1 byte: 0..5: padding, must be 0; 6..7: key selector (0-3) -+*/ -+#define WLAN_WEP_IV_LEN 4 -+/* 802.11 says 2312 but looks like 2312 is a max size of _WEPed data_ */ -+#define WLAN_DATA_MAXLEN 2304 -+#define WLAN_WEP_ICV_LEN 4 -+#define WLAN_FCS_LEN 4 -+#define WLAN_A3FR_MAXLEN (WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN) -+#define WLAN_A4FR_MAXLEN (WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN) -+#define WLAN_A3FR_MAXLEN_FCS (WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN + 4) -+#define WLAN_A4FR_MAXLEN_FCS (WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + 4) -+#define WLAN_A3FR_MAXLEN_WEP (WLAN_A3FR_MAXLEN + 8) -+#define WLAN_A4FR_MAXLEN_WEP (WLAN_A4FR_MAXLEN + 8) -+#define WLAN_A3FR_MAXLEN_WEP_FCS (WLAN_A3FR_MAXLEN_FCS + 8) -+#define WLAN_A4FR_MAXLEN_WEP_FCS (WLAN_A4FR_MAXLEN_FCS + 8) -+ -+#define WLAN_BSS_TS_LEN 8 -+#define WLAN_SSID_MAXLEN 32 -+#define WLAN_BEACON_FR_MAXLEN (WLAN_HDR_A3_LEN + 334) -+#define WLAN_ATIM_FR_MAXLEN (WLAN_HDR_A3_LEN + 0) -+#define WLAN_DISASSOC_FR_MAXLEN (WLAN_HDR_A3_LEN + 2) -+#define WLAN_ASSOCREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 48) -+#define WLAN_ASSOCRESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 16) -+#define WLAN_REASSOCREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 54) -+#define WLAN_REASSOCRESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 16) -+#define WLAN_PROBEREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 44) -+#define WLAN_PROBERESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 78) -+#define WLAN_AUTHEN_FR_MAXLEN (WLAN_HDR_A3_LEN + 261) -+#define WLAN_DEAUTHEN_FR_MAXLEN (WLAN_HDR_A3_LEN + 2) -+#define WLAN_CHALLENGE_IE_LEN 130 -+#define WLAN_CHALLENGE_LEN 128 -+#define WLAN_WEP_MAXKEYLEN 13 -+#define WLAN_WEP_NKEYS 4 -+ -+/*--- Frame Control Field -------------------------------------*/ -+/* Frame Types */ -+#define WLAN_FTYPE_MGMT 0x00 -+#define WLAN_FTYPE_CTL 0x01 -+#define WLAN_FTYPE_DATA 0x02 -+ -+/* Frame subtypes */ -+/* Management */ -+#define WLAN_FSTYPE_ASSOCREQ 0x00 -+#define WLAN_FSTYPE_ASSOCRESP 0x01 -+#define WLAN_FSTYPE_REASSOCREQ 0x02 -+#define WLAN_FSTYPE_REASSOCRESP 0x03 -+#define WLAN_FSTYPE_PROBEREQ 0x04 -+#define WLAN_FSTYPE_PROBERESP 0x05 -+#define WLAN_FSTYPE_BEACON 0x08 -+#define WLAN_FSTYPE_ATIM 0x09 -+#define WLAN_FSTYPE_DISASSOC 0x0a -+#define WLAN_FSTYPE_AUTHEN 0x0b -+#define WLAN_FSTYPE_DEAUTHEN 0x0c -+ -+/* Control */ -+#define WLAN_FSTYPE_PSPOLL 0x0a -+#define WLAN_FSTYPE_RTS 0x0b -+#define WLAN_FSTYPE_CTS 0x0c -+#define WLAN_FSTYPE_ACK 0x0d -+#define WLAN_FSTYPE_CFEND 0x0e -+#define WLAN_FSTYPE_CFENDCFACK 0x0f -+ -+/* Data */ -+#define WLAN_FSTYPE_DATAONLY 0x00 -+#define WLAN_FSTYPE_DATA_CFACK 0x01 -+#define WLAN_FSTYPE_DATA_CFPOLL 0x02 -+#define WLAN_FSTYPE_DATA_CFACK_CFPOLL 0x03 -+#define WLAN_FSTYPE_NULL 0x04 -+#define WLAN_FSTYPE_CFACK 0x05 -+#define WLAN_FSTYPE_CFPOLL 0x06 -+#define WLAN_FSTYPE_CFACK_CFPOLL 0x07 -+ -+/*--- FC Constants v. 2.0 ------------------------------------*/ -+/* Each constant is defined twice: WF_CONST is in host */ -+/* byteorder, WF_CONSTi is in ieee byteorder. */ -+/* Usage: */ -+/* printf("the frame subtype is %X", WF_FC_FTYPEi & rx.fc); */ -+/* tx.fc = WF_FTYPE_CTLi | WF_FSTYPE_RTSi; */ -+/*------------------------------------------------------------*/ -+ -+enum { -+/*--- Frame Control Field -------------------------------------*/ -+/* Protocol version: always 0 for current 802.11 standards */ -+IEEE16(WF_FC_PVER, 0x0003) -+IEEE16(WF_FC_FTYPE, 0x000c) -+IEEE16(WF_FC_FSTYPE, 0x00f0) -+IEEE16(WF_FC_TODS, 0x0100) -+IEEE16(WF_FC_FROMDS, 0x0200) -+IEEE16(WF_FC_FROMTODS, 0x0300) -+IEEE16(WF_FC_MOREFRAG, 0x0400) -+IEEE16(WF_FC_RETRY, 0x0800) -+/* Indicates PS mode in which STA will be after successful completion -+** of current frame exchange sequence. Always 0 for AP frames */ -+IEEE16(WF_FC_PWRMGT, 0x1000) -+/* What MoreData=1 means: -+** From AP to STA in PS mode: don't sleep yet, I have more frames for you -+** From Contention-Free (CF) Pollable STA in response to a CF-Poll: -+** STA has buffered frames for transmission in response to next CF-Poll -+** Bcast/mcast frames transmitted from AP: -+** when additional bcast/mcast frames remain to be transmitted by AP -+** during this beacon interval -+** In all other cases MoreData=0 */ -+IEEE16(WF_FC_MOREDATA, 0x2000) -+IEEE16(WF_FC_ISWEP, 0x4000) -+IEEE16(WF_FC_ORDER, 0x8000) -+ -+/* Frame Types */ -+IEEE16(WF_FTYPE_MGMT, 0x00) -+IEEE16(WF_FTYPE_CTL, 0x04) -+IEEE16(WF_FTYPE_DATA, 0x08) -+ -+/* Frame subtypes */ -+/* Management */ -+IEEE16(WF_FSTYPE_ASSOCREQ, 0x00) -+IEEE16(WF_FSTYPE_ASSOCRESP, 0x10) -+IEEE16(WF_FSTYPE_REASSOCREQ, 0x20) -+IEEE16(WF_FSTYPE_REASSOCRESP, 0x30) -+IEEE16(WF_FSTYPE_PROBEREQ, 0x40) -+IEEE16(WF_FSTYPE_PROBERESP, 0x50) -+IEEE16(WF_FSTYPE_BEACON, 0x80) -+IEEE16(WF_FSTYPE_ATIM, 0x90) -+IEEE16(WF_FSTYPE_DISASSOC, 0xa0) -+IEEE16(WF_FSTYPE_AUTHEN, 0xb0) -+IEEE16(WF_FSTYPE_DEAUTHEN, 0xc0) -+ -+/* Control */ -+IEEE16(WF_FSTYPE_PSPOLL, 0xa0) -+IEEE16(WF_FSTYPE_RTS, 0xb0) -+IEEE16(WF_FSTYPE_CTS, 0xc0) -+IEEE16(WF_FSTYPE_ACK, 0xd0) -+IEEE16(WF_FSTYPE_CFEND, 0xe0) -+IEEE16(WF_FSTYPE_CFENDCFACK, 0xf0) -+ -+/* Data */ -+IEEE16(WF_FSTYPE_DATAONLY, 0x00) -+IEEE16(WF_FSTYPE_DATA_CFACK, 0x10) -+IEEE16(WF_FSTYPE_DATA_CFPOLL, 0x20) -+IEEE16(WF_FSTYPE_DATA_CFACK_CFPOLL, 0x30) -+IEEE16(WF_FSTYPE_NULL, 0x40) -+IEEE16(WF_FSTYPE_CFACK, 0x50) -+IEEE16(WF_FSTYPE_CFPOLL, 0x60) -+IEEE16(WF_FSTYPE_CFACK_CFPOLL, 0x70) -+}; -+ -+ -+/*********************************************************************** -+** Macros -+*/ -+ -+/*--- Duration Macros ----------------------------------------*/ -+/* Macros to get/set the bitfields of the Duration Field */ -+/* - the duration value is only valid when bit15 is zero */ -+/* - the firmware handles these values, so I'm not going */ -+/* to use these macros right now. */ -+/*------------------------------------------------------------*/ -+ -+/*--- Sequence Control Macros -------------------------------*/ -+/* Macros to get/set the bitfields of the Sequence Control */ -+/* Field. */ -+/*------------------------------------------------------------*/ -+#define WLAN_GET_SEQ_FRGNUM(n) ((u16)(n) & 0x000f) -+#define WLAN_GET_SEQ_SEQNUM(n) (((u16)(n) & 0xfff0) >> 4) -+ -+/*--- Data ptr macro -----------------------------------------*/ -+/* Creates a u8* to the data portion of a frame */ -+/* Assumes you're passing in a ptr to the beginning of the hdr*/ -+/*------------------------------------------------------------*/ -+#define WLAN_HDR_A3_DATAP(p) (((u8*)(p)) + WLAN_HDR_A3_LEN) -+#define WLAN_HDR_A4_DATAP(p) (((u8*)(p)) + WLAN_HDR_A4_LEN) -+ -+ -+/*********************************************************************** -+** Types -+*/ -+ -+/* 802.11 header type -+** -+** Note the following: -+** a1 *always* is receiver's mac or bcast/mcast -+** a2 *always* is transmitter's mac, if a2 exists -+** seq: [0:3] frag#, [4:15] seq# - used for dup detection -+** (dups from retries have same seq#) */ -+typedef struct wlan_hdr { -+ u16 fc; -+ u16 dur; -+ u8 a1[ETH_ALEN]; -+ u8 a2[ETH_ALEN]; -+ u8 a3[ETH_ALEN]; -+ u16 seq; -+ u8 a4[ETH_ALEN]; -+} WLAN_PACKED wlan_hdr_t; -+ -+/* Separate structs for use if frame type is known */ -+typedef struct wlan_hdr_a3 { -+ u16 fc; -+ u16 dur; -+ u8 a1[ETH_ALEN]; -+ u8 a2[ETH_ALEN]; -+ u8 a3[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED wlan_hdr_a3_t; -+ -+typedef struct wlan_hdr_mgmt { -+ u16 fc; -+ u16 dur; -+ u8 da[ETH_ALEN]; -+ u8 sa[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED wlan_hdr_mgmt_t; -+ -+#ifdef NOT_NEEDED_YET -+typedef struct { /* ad-hoc peer->peer (to/from DS = 0/0) */ -+ u16 fc; -+ u16 dur; -+ u8 da[ETH_ALEN]; -+ u8 sa[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED ibss; -+typedef struct { /* ap->sta (to/from DS = 0/1) */ -+ u16 fc; -+ u16 dur; -+ u8 da[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+ u8 sa[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED fromap; -+typedef struct { /* sta->ap (to/from DS = 1/0) */ -+ u16 fc; -+ u16 dur; -+ u8 bssid[ETH_ALEN]; -+ u8 sa[ETH_ALEN]; -+ u8 da[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED toap; -+typedef struct { /* wds->wds (to/from DS = 1/1), the only 4addr pkt */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+ u8 ta[ETH_ALEN]; -+ u8 da[ETH_ALEN]; -+ u16 seq; -+ u8 sa[ETH_ALEN]; -+} WLAN_PACKED wds; -+typedef struct { /* all management packets */ -+ u16 fc; -+ u16 dur; -+ u8 da[ETH_ALEN]; -+ u8 sa[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED mgmt; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+ u8 ta[ETH_ALEN]; -+} WLAN_PACKED rts; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+} WLAN_PACKED cts; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+} WLAN_PACKED ack; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ /* NB: this one holds Assoc ID in dur field: */ -+ u16 aid; -+ u8 bssid[ETH_ALEN]; -+ u8 ta[ETH_ALEN]; -+} WLAN_PACKED pspoll; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+} WLAN_PACKED cfend; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+} WLAN_PACKED cfendcfack; -+#endif -+ -+/* Prism header emulation (monitor mode) */ -+typedef struct wlanitem_u32 { -+ u32 did; -+ u16 status; -+ u16 len; -+ u32 data; -+} WLAN_PACKED wlanitem_u32_t; -+#define WLANITEM_STATUS_data_ok 0 -+#define WLANITEM_STATUS_no_value 1 -+#define WLANITEM_STATUS_invalid_itemname 2 -+#define WLANITEM_STATUS_invalid_itemdata 3 -+#define WLANITEM_STATUS_missing_itemdata 4 -+#define WLANITEM_STATUS_incomplete_itemdata 5 -+#define WLANITEM_STATUS_invalid_msg_did 6 -+#define WLANITEM_STATUS_invalid_mib_did 7 -+#define WLANITEM_STATUS_missing_conv_func 8 -+#define WLANITEM_STATUS_string_too_long 9 -+#define WLANITEM_STATUS_data_out_of_range 10 -+#define WLANITEM_STATUS_string_too_short 11 -+#define WLANITEM_STATUS_missing_valid_func 12 -+#define WLANITEM_STATUS_unknown 13 -+#define WLANITEM_STATUS_invalid_did 14 -+#define WLANITEM_STATUS_missing_print_func 15 -+ -+#define WLAN_DEVNAMELEN_MAX 16 -+typedef struct wlansniffrm { -+ u32 msgcode; -+ u32 msglen; -+ u8 devname[WLAN_DEVNAMELEN_MAX]; -+ wlanitem_u32_t hosttime; -+ wlanitem_u32_t mactime; -+ wlanitem_u32_t channel; -+ wlanitem_u32_t rssi; -+ wlanitem_u32_t sq; -+ wlanitem_u32_t signal; -+ wlanitem_u32_t noise; -+ wlanitem_u32_t rate; -+ wlanitem_u32_t istx; /* tx? 0:no 1:yes */ -+ wlanitem_u32_t frmlen; -+} WLAN_PACKED wlansniffrm_t; -+#define WLANSNIFFFRM 0x0041 -+#define WLANSNIFFFRM_hosttime 0x1041 -+#define WLANSNIFFFRM_mactime 0x2041 -+#define WLANSNIFFFRM_channel 0x3041 -+#define WLANSNIFFFRM_rssi 0x4041 -+#define WLANSNIFFFRM_sq 0x5041 -+#define WLANSNIFFFRM_signal 0x6041 -+#define WLANSNIFFFRM_noise 0x7041 -+#define WLANSNIFFFRM_rate 0x8041 -+#define WLANSNIFFFRM_istx 0x9041 -+#define WLANSNIFFFRM_frmlen 0xA041 -Index: linux-2.6.22/drivers/net/wireless/acx/wlan_mgmt.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/net/wireless/acx/wlan_mgmt.h 2007-08-23 18:34:19.000000000 +0200 -@@ -0,0 +1,582 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** This code is based on elements which are -+** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -+** info@linux-wlan.com -+** http://www.linux-wlan.com -+*/ -+ -+/*********************************************************************** -+** Constants -+*/ -+ -+/*-- Information Element IDs --------------------*/ -+#define WLAN_EID_SSID 0 -+#define WLAN_EID_SUPP_RATES 1 -+#define WLAN_EID_FH_PARMS 2 -+#define WLAN_EID_DS_PARMS 3 -+#define WLAN_EID_CF_PARMS 4 -+#define WLAN_EID_TIM 5 -+#define WLAN_EID_IBSS_PARMS 6 -+#define WLAN_EID_COUNTRY 7 /* 802.11d */ -+#define WLAN_EID_FH_HOP_PARMS 8 /* 802.11d */ -+#define WLAN_EID_FH_TABLE 9 /* 802.11d */ -+#define WLAN_EID_REQUEST 10 /* 802.11d */ -+/*-- values 11-15 reserved --*/ -+#define WLAN_EID_CHALLENGE 16 -+/*-- values 17-31 reserved for challenge text extension --*/ -+#define WLAN_EID_PWR_CONSTRAINT 32 /* 11h PowerConstraint */ -+#define WLAN_EID_ERP_INFO 42 /* was seen from WRT54GS with OpenWrt */ -+#define WLAN_EID_NONERP 47 /* was seen from WRT54GS with OpenWrt */ -+#define WLAN_EID_RSN 48 -+#define WLAN_EID_EXT_RATES 50 -+#define WLAN_EID_UNKNOWN128 128 -+#define WLAN_EID_UNKNOWN133 133 -+#define WLAN_EID_GENERIC 221 /* was seen from WRT54GS with OpenWrt */ -+#define WLAN_EID_UNKNOWN223 223 -+ -+#if 0 -+#define WLAN_EID_PWR_CAP 33 /* 11h PowerCapability */ -+#define WLAN_EID_TPC_REQUEST 34 /* 11h TPC Request */ -+#define WLAN_EID_TPC_REPORT 35 /* 11h TPC Report */ -+#define WLAN_EID_SUPP_CHANNELS 36 /* 11h Supported Channels */ -+#define WLAN_EID_CHANNEL_SWITCH 37 /* 11h ChannelSwitch */ -+#define WLAN_EID_MEASURE_REQUEST 38 /* 11h MeasurementRequest */ -+#define WLAN_EID_MEASURE_REPORT 39 /* 11h MeasurementReport */ -+#define WLAN_EID_QUIET_ID 40 /* 11h Quiet */ -+#define WLAN_EID_IBSS_DFS_ID 41 /* 11h IBSS_DFS */ -+#endif -+ -+/*-- Reason Codes -------------------------------*/ -+#define WLAN_MGMT_REASON_RSVD 0 -+#define WLAN_MGMT_REASON_UNSPEC 1 -+#define WLAN_MGMT_REASON_PRIOR_AUTH_INVALID 2 -+#define WLAN_MGMT_REASON_DEAUTH_LEAVING 3 -+#define WLAN_MGMT_REASON_DISASSOC_INACTIVE 4 -+#define WLAN_MGMT_REASON_DISASSOC_AP_BUSY 5 -+#define WLAN_MGMT_REASON_CLASS2_NONAUTH 6 -+#define WLAN_MGMT_REASON_CLASS3_NONASSOC 7 -+#define WLAN_MGMT_REASON_DISASSOC_STA_HASLEFT 8 -+#define WLAN_MGMT_REASON_CANT_ASSOC_NONAUTH 9 -+ -+/*-- Status Codes -------------------------------*/ -+#define WLAN_MGMT_STATUS_SUCCESS 0 -+#define WLAN_MGMT_STATUS_UNSPEC_FAILURE 1 -+#define WLAN_MGMT_STATUS_CAPS_UNSUPPORTED 10 -+#define WLAN_MGMT_STATUS_REASSOC_NO_ASSOC 11 -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_UNSPEC 12 -+#define WLAN_MGMT_STATUS_UNSUPPORTED_AUTHALG 13 -+#define WLAN_MGMT_STATUS_RX_AUTH_NOSEQ 14 -+#define WLAN_MGMT_STATUS_CHALLENGE_FAIL 15 -+#define WLAN_MGMT_STATUS_AUTH_TIMEOUT 16 -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_BUSY 17 -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_RATES 18 -+/* p80211b additions */ -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOSHORT 19 -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOPBCC 20 -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOAGILITY 21 -+ -+/*-- Auth Algorithm Field ---------------------------*/ -+#define WLAN_AUTH_ALG_OPENSYSTEM 0 -+#define WLAN_AUTH_ALG_SHAREDKEY 1 -+ -+/*-- Management Frame Field Offsets -------------*/ -+/* Note: Not all fields are listed because of variable lengths */ -+/* Note: These offsets are from the start of the frame data */ -+ -+#define WLAN_BEACON_OFF_TS 0 -+#define WLAN_BEACON_OFF_BCN_INT 8 -+#define WLAN_BEACON_OFF_CAPINFO 10 -+#define WLAN_BEACON_OFF_SSID 12 -+ -+#define WLAN_DISASSOC_OFF_REASON 0 -+ -+#define WLAN_ASSOCREQ_OFF_CAP_INFO 0 -+#define WLAN_ASSOCREQ_OFF_LISTEN_INT 2 -+#define WLAN_ASSOCREQ_OFF_SSID 4 -+ -+#define WLAN_ASSOCRESP_OFF_CAP_INFO 0 -+#define WLAN_ASSOCRESP_OFF_STATUS 2 -+#define WLAN_ASSOCRESP_OFF_AID 4 -+#define WLAN_ASSOCRESP_OFF_SUPP_RATES 6 -+ -+#define WLAN_REASSOCREQ_OFF_CAP_INFO 0 -+#define WLAN_REASSOCREQ_OFF_LISTEN_INT 2 -+#define WLAN_REASSOCREQ_OFF_CURR_AP 4 -+#define WLAN_REASSOCREQ_OFF_SSID 10 -+ -+#define WLAN_REASSOCRESP_OFF_CAP_INFO 0 -+#define WLAN_REASSOCRESP_OFF_STATUS 2 -+#define WLAN_REASSOCRESP_OFF_AID 4 -+#define WLAN_REASSOCRESP_OFF_SUPP_RATES 6 -+ -+#define WLAN_PROBEREQ_OFF_SSID 0 -+ -+#define WLAN_PROBERESP_OFF_TS 0 -+#define WLAN_PROBERESP_OFF_BCN_INT 8 -+#define WLAN_PROBERESP_OFF_CAP_INFO 10 -+#define WLAN_PROBERESP_OFF_SSID 12 -+ -+#define WLAN_AUTHEN_OFF_AUTH_ALG 0 -+#define WLAN_AUTHEN_OFF_AUTH_SEQ 2 -+#define WLAN_AUTHEN_OFF_STATUS 4 -+#define WLAN_AUTHEN_OFF_CHALLENGE 6 -+ -+#define WLAN_DEAUTHEN_OFF_REASON 0 -+ -+enum { -+IEEE16(WF_MGMT_CAP_ESS, 0x0001) -+IEEE16(WF_MGMT_CAP_IBSS, 0x0002) -+/* In (re)assoc request frames by STA: -+** Pollable=0, PollReq=0: STA is not CF-Pollable -+** 0 1: STA is CF-Pollable, not requesting to be placed on the CF-Polling list -+** 1 0: STA is CF-Pollable, requesting to be placed on the CF-Polling list -+** 1 1: STA is CF-Pollable, requesting never to be polled -+** In beacon, proberesp, (re)assoc resp frames by AP: -+** 0 0: No point coordinator at AP -+** 0 1: Point coordinator at AP for delivery only (no polling) -+** 1 0: Point coordinator at AP for delivery and polling -+** 1 1: Reserved */ -+IEEE16(WF_MGMT_CAP_CFPOLLABLE, 0x0004) -+IEEE16(WF_MGMT_CAP_CFPOLLREQ, 0x0008) -+/* 1=non-WEP data frames are disallowed */ -+IEEE16(WF_MGMT_CAP_PRIVACY, 0x0010) -+/* In beacon, proberesp, (re)assocresp by AP/AdHoc: -+** 1=use of shortpre is allowed ("I can receive shortpre") */ -+IEEE16(WF_MGMT_CAP_SHORT, 0x0020) -+IEEE16(WF_MGMT_CAP_PBCC, 0x0040) -+IEEE16(WF_MGMT_CAP_AGILITY, 0x0080) -+/* In (re)assoc request frames by STA: -+** 1=short slot time implemented and enabled -+** NB: AP shall use long slot time beginning at the next Beacon after assoc -+** of STA with this bit set to 0 -+** In beacon, proberesp, (re)assoc resp frames by AP: -+** currently used slot time value: 0/1 - long/short */ -+IEEE16(WF_MGMT_CAP_SHORTSLOT, 0x0400) -+/* In (re)assoc request frames by STA: 1=CCK-OFDM is implemented and enabled -+** In beacon, proberesp, (re)assoc resp frames by AP/AdHoc: -+** 1=CCK-OFDM is allowed */ -+IEEE16(WF_MGMT_CAP_CCKOFDM, 0x2000) -+}; -+ -+ -+/*********************************************************************** -+** Types -+*/ -+ -+/* Information Element types */ -+ -+/* prototype structure, all IEs start with these members */ -+typedef struct wlan_ie { -+ u8 eid; -+ u8 len; -+} WLAN_PACKED wlan_ie_t; -+ -+/*-- Service Set Identity (SSID) -----------------*/ -+typedef struct wlan_ie_ssid { -+ u8 eid; -+ u8 len; -+ u8 ssid[1]; /* may be zero */ -+} WLAN_PACKED wlan_ie_ssid_t; -+ -+/*-- Supported Rates -----------------------------*/ -+typedef struct wlan_ie_supp_rates { -+ u8 eid; -+ u8 len; -+ u8 rates[1]; /* had better be at LEAST one! */ -+} WLAN_PACKED wlan_ie_supp_rates_t; -+ -+/*-- FH Parameter Set ----------------------------*/ -+typedef struct wlan_ie_fh_parms { -+ u8 eid; -+ u8 len; -+ u16 dwell; -+ u8 hopset; -+ u8 hoppattern; -+ u8 hopindex; -+} WLAN_PACKED wlan_ie_fh_parms_t; -+ -+/*-- DS Parameter Set ----------------------------*/ -+typedef struct wlan_ie_ds_parms { -+ u8 eid; -+ u8 len; -+ u8 curr_ch; -+} WLAN_PACKED wlan_ie_ds_parms_t; -+ -+/*-- CF Parameter Set ----------------------------*/ -+typedef struct wlan_ie_cf_parms { -+ u8 eid; -+ u8 len; -+ u8 cfp_cnt; -+ u8 cfp_period; -+ u16 cfp_maxdur; -+ u16 cfp_durremaining; -+} WLAN_PACKED wlan_ie_cf_parms_t; -+ -+/*-- TIM ------------------------------------------*/ -+typedef struct wlan_ie_tim { -+ u8 eid; -+ u8 len; -+ u8 dtim_cnt; -+ u8 dtim_period; -+ u8 bitmap_ctl; -+ u8 virt_bm[1]; -+} WLAN_PACKED wlan_ie_tim_t; -+ -+/*-- IBSS Parameter Set ---------------------------*/ -+typedef struct wlan_ie_ibss_parms { -+ u8 eid; -+ u8 len; -+ u16 atim_win; -+} WLAN_PACKED wlan_ie_ibss_parms_t; -+ -+/*-- Challenge Text ------------------------------*/ -+typedef struct wlan_ie_challenge { -+ u8 eid; -+ u8 len; -+ u8 challenge[1]; -+} WLAN_PACKED wlan_ie_challenge_t; -+ -+/*-- ERP (42) -------------------------------------*/ -+typedef struct wlan_ie_erp { -+ u8 eid; -+ u8 len; -+ /* bit 0:Non ERP present -+ ** 1:Use Protection -+ ** 2:Barker Preamble mode -+ ** 3-7:reserved */ -+ u8 erp; -+} WLAN_PACKED wlan_ie_erp_t; -+ -+/* Types for parsing mgmt frames */ -+ -+/* prototype structure, all mgmt frame types will start with these members */ -+typedef struct wlan_fr_mgmt { -+ u16 type; -+ u16 len; /* DOES NOT include FCS */ -+ wlan_hdr_t *hdr; -+ /* used for target specific data, skb in Linux */ -+ /*-- fixed fields -----------*/ -+ /*-- info elements ----------*/ -+} WLAN_PACKED wlan_fr_mgmt_t; -+ -+/*-- Beacon ---------------------------------------*/ -+typedef struct wlan_fr_beacon { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u64 *ts; -+ u16 *bcn_int; -+ u16 *cap_info; -+ /*-- info elements ----------*/ -+ wlan_ie_ssid_t *ssid; -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+ wlan_ie_fh_parms_t *fh_parms; -+ wlan_ie_ds_parms_t *ds_parms; -+ wlan_ie_cf_parms_t *cf_parms; -+ wlan_ie_ibss_parms_t *ibss_parms; -+ wlan_ie_tim_t *tim; /* in beacon only, not proberesp */ -+ wlan_ie_erp_t *erp; /* in beacon only, not proberesp */ -+} wlan_fr_beacon_t; -+#define wlan_fr_proberesp wlan_fr_beacon -+#define wlan_fr_proberesp_t wlan_fr_beacon_t -+ -+/*-- IBSS ATIM ------------------------------------*/ -+typedef struct wlan_fr_ibssatim { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ /*-- info elements ----------*/ -+ /* this frame type has a null body */ -+} wlan_fr_ibssatim_t; -+ -+/*-- Disassociation -------------------------------*/ -+typedef struct wlan_fr_disassoc { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *reason; -+ /*-- info elements ----------*/ -+} wlan_fr_disassoc_t; -+ -+/*-- Association Request --------------------------*/ -+typedef struct wlan_fr_assocreq { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *cap_info; -+ u16 *listen_int; -+ /*-- info elements ----------*/ -+ wlan_ie_ssid_t *ssid; -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+} wlan_fr_assocreq_t; -+ -+/*-- Association Response -------------------------*/ -+typedef struct wlan_fr_assocresp { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *cap_info; -+ u16 *status; -+ u16 *aid; -+ /*-- info elements ----------*/ -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+} wlan_fr_assocresp_t; -+ -+/*-- Reassociation Request ------------------------*/ -+typedef struct wlan_fr_reassocreq { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *cap_info; -+ u16 *listen_int; -+ u8 *curr_ap; -+ /*-- info elements ----------*/ -+ wlan_ie_ssid_t *ssid; -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+} wlan_fr_reassocreq_t; -+ -+/*-- Reassociation Response -----------------------*/ -+typedef struct wlan_fr_reassocresp { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *cap_info; -+ u16 *status; -+ u16 *aid; -+ /*-- info elements ----------*/ -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+} wlan_fr_reassocresp_t; -+ -+/*-- Probe Request --------------------------------*/ -+typedef struct wlan_fr_probereq { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ /*-- info elements ----------*/ -+ wlan_ie_ssid_t *ssid; -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+} wlan_fr_probereq_t; -+ -+/*-- Authentication -------------------------------*/ -+typedef struct wlan_fr_authen { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *auth_alg; -+ u16 *auth_seq; -+ u16 *status; -+ /*-- info elements ----------*/ -+ wlan_ie_challenge_t *challenge; -+} wlan_fr_authen_t; -+ -+/*-- Deauthenication -----------------------------*/ -+typedef struct wlan_fr_deauthen { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *reason; -+ /*-- info elements ----------*/ -+} wlan_fr_deauthen_t; -+ -+/* Types for building mgmt frames */ -+ -+/* Warning. Several types used in below structs are -+** in fact variable length. Use structs with such fields with caution */ -+typedef struct auth_frame_body { -+ u16 auth_alg; -+ u16 auth_seq; -+ u16 status; -+ wlan_ie_challenge_t challenge; -+} WLAN_PACKED auth_frame_body_t; -+ -+typedef struct assocresp_frame_body { -+ u16 cap_info; -+ u16 status; -+ u16 aid; -+ wlan_ie_supp_rates_t rates; -+} WLAN_PACKED assocresp_frame_body_t; -+ -+typedef struct reassocreq_frame_body { -+ u16 cap_info; -+ u16 listen_int; -+ u8 current_ap[ETH_ALEN]; -+ wlan_ie_ssid_t ssid; -+/* access to this one is disabled since ssid_t is variable length: */ -+ /* wlan_ie_supp_rates_t rates; */ -+} WLAN_PACKED reassocreq_frame_body_t; -+ -+typedef struct reassocresp_frame_body { -+ u16 cap_info; -+ u16 status; -+ u16 aid; -+ wlan_ie_supp_rates_t rates; -+} WLAN_PACKED reassocresp_frame_body_t; -+ -+typedef struct deauthen_frame_body { -+ u16 reason; -+} WLAN_PACKED deauthen_frame_body_t; -+ -+typedef struct disassoc_frame_body { -+ u16 reason; -+} WLAN_PACKED disassoc_frame_body_t; -+ -+typedef struct probereq_frame_body { -+ wlan_ie_ssid_t ssid; -+ wlan_ie_supp_rates_t rates; -+} WLAN_PACKED probereq_frame_body_t; -+ -+typedef struct proberesp_frame_body { -+ u8 timestamp[8]; -+ u16 beacon_int; -+ u16 cap_info; -+ wlan_ie_ssid_t ssid; -+/* access to these is disabled since ssid_t is variable length: */ -+ /* wlan_ie_supp_rates_t rates; */ -+ /* fhps_t fhps; */ -+ /* dsps_t dsps; */ -+ /* cfps_t cfps; */ -+} WLAN_PACKED proberesp_frame_body_t; -+ -+ -+/*********************************************************************** -+** Functions -+*/ -+ -+/* Helpers for parsing mgmt frames */ -+void wlan_mgmt_decode_ibssatim(wlan_fr_ibssatim_t *f); -+void wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t *f); -+void wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t *f); -+void wlan_mgmt_decode_authen(wlan_fr_authen_t *f); -+void wlan_mgmt_decode_beacon(wlan_fr_beacon_t *f); -+void wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t *f); -+void wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t *f); -+void wlan_mgmt_decode_probereq(wlan_fr_probereq_t *f); -+void wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t *f); -+void wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t *f); -+void wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t *f); -+ -+/* Helpers for building mgmt frames */ -+static inline u8* -+wlan_fill_ie_ssid(u8 *p, int len, const char *ssid) -+{ -+ struct wlan_ie_ssid *ie = (void*)p; -+ ie->eid = WLAN_EID_SSID; -+ ie->len = len; -+ memcpy(ie->ssid, ssid, len); -+ return p + len + 2; -+} -+/* This controls whether we create 802.11g 'ext supported rates' IEs -+** or just create overlong 'supported rates' IEs instead -+** (non-11g compliant) */ -+#define WE_OBEY_802_11G 1 -+static inline u8* -+wlan_fill_ie_rates(u8 *p, int len, const u8 *rates) -+{ -+ struct wlan_ie_supp_rates *ie = (void*)p; -+#if WE_OBEY_802_11G -+ if (len > 8 ) len = 8; -+#endif -+ /* supported rates (1 to 8 octets) */ -+ ie->eid = WLAN_EID_SUPP_RATES; -+ ie->len = len; -+ memcpy(ie->rates, rates, len); -+ return p + len + 2; -+} -+/* This one wouldn't create an IE at all if not needed */ -+static inline u8* -+wlan_fill_ie_rates_ext(u8 *p, int len, const u8 *rates) -+{ -+ struct wlan_ie_supp_rates *ie = (void*)p; -+#if !WE_OBEY_802_11G -+ return p; -+#endif -+ len -= 8; -+ if (len <= 0) return p; -+ /* ext supported rates */ -+ ie->eid = WLAN_EID_EXT_RATES; -+ ie->len = len; -+ memcpy(ie->rates, rates+8, len); -+ return p + len + 2; -+} -+static inline u8* -+wlan_fill_ie_ds_parms(u8 *p, int channel) -+{ -+ struct wlan_ie_ds_parms *ie = (void*)p; -+ ie->eid = WLAN_EID_DS_PARMS; -+ ie->len = 1; -+ ie->curr_ch = channel; -+ return p + sizeof(*ie); -+} -+static inline u8* -+wlan_fill_ie_ibss_parms(u8 *p, int atim_win) -+{ -+ struct wlan_ie_ibss_parms *ie = (void*)p; -+ ie->eid = WLAN_EID_IBSS_PARMS; -+ ie->len = 2; -+ ie->atim_win = atim_win; -+ return p + sizeof(*ie); -+} -+static inline u8* -+wlan_fill_ie_tim(u8 *p, int rem, int period, int bcast, -+ int ofs, int len, const u8 *vbm) -+{ -+ struct wlan_ie_tim *ie = (void*)p; -+ ie->eid = WLAN_EID_TIM; -+ ie->len = len + 3; -+ ie->dtim_cnt = rem; -+ ie->dtim_period = period; -+ ie->bitmap_ctl = ofs | (bcast!=0); -+ if (vbm) -+ memcpy(ie->virt_bm, vbm, len); /* min 1 byte */ -+ else -+ ie->virt_bm[0] = 0; -+ return p + len + 3 + 2; -+} -Index: linux-2.6.22/drivers/net/wireless/Kconfig -=================================================================== ---- linux-2.6.22.orig/drivers/net/wireless/Kconfig 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/net/wireless/Kconfig 2007-08-23 18:34:19.000000000 +0200 -@@ -5,6 +5,36 @@ - menu "Wireless LAN" - depends on !S390 - -+config NET_RADIO -+ bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions" -+ select WIRELESS_EXT -+ ---help--- -+ Support for wireless LANs and everything having to do with radio, -+ but not with amateur radio or FM broadcasting. -+ -+ Saying Y here also enables the Wireless Extensions (creates -+ /proc/net/wireless and enables iwconfig access). The Wireless -+ Extension is a generic API allowing a driver to expose to the user -+ space configuration and statistics specific to common Wireless LANs. -+ The beauty of it is that a single set of tool can support all the -+ variations of Wireless LANs, regardless of their type (as long as -+ the driver supports Wireless Extension). Another advantage is that -+ these parameters may be changed on the fly without restarting the -+ driver (or Linux). If you wish to use Wireless Extensions with -+ wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch -+ the tools from -+ . -+ -+config NET_WIRELESS_RTNETLINK -+ bool "Wireless Extension API over RtNetlink" -+ depends on NET_RADIO -+ ---help--- -+ Support the Wireless Extension API over the RtNetlink socket -+ in addition to the traditional ioctl interface (selected above). -+ -+ For now, few tools use this facility, but it might grow in the -+ future. The only downside is that it adds 4.5 kB to your kernel. -+ - config WLAN_PRE80211 - bool "Wireless LAN (pre-802.11)" - depends on NETDEVICES -@@ -549,5 +579,6 @@ - source "drivers/net/wireless/hostap/Kconfig" - source "drivers/net/wireless/bcm43xx/Kconfig" - source "drivers/net/wireless/zd1211rw/Kconfig" -+source "drivers/net/wireless/acx/Kconfig" - - endmenu -Index: linux-2.6.22/drivers/net/wireless/Makefile -=================================================================== ---- linux-2.6.22.orig/drivers/net/wireless/Makefile 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/net/wireless/Makefile 2007-08-23 18:34:19.000000000 +0200 -@@ -34,6 +34,8 @@ - - obj-$(CONFIG_PRISM54) += prism54/ - -+obj-$(CONFIG_ACX) += acx/ -+ - obj-$(CONFIG_HOSTAP) += hostap/ - obj-$(CONFIG_BCM43XX) += bcm43xx/ - obj-$(CONFIG_ZD1211RW) += zd1211rw/ diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/htcuni.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/htcuni.patch deleted file mode 100644 index 4d746749c5..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/htcuni.patch +++ /dev/null @@ -1,8044 +0,0 @@ ---- - arch/arm/Kconfig | 2 - arch/arm/mach-pxa/Kconfig | 89 + - arch/arm/mach-pxa/Makefile | 1 - arch/arm/mach-pxa/corgi.c | 3 - arch/arm/mach-pxa/generic.c | 13 - arch/arm/mach-pxa/htcuniversal/Makefile | 19 - arch/arm/mach-pxa/htcuniversal/htcuniversal.c | 468 +++++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c | 917 +++++++++++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h | 65 - arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c | 143 + - arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c | 61 - arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c | 135 + - arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h | 17 - arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c | 87 + - arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c | 226 ++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c | 212 ++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c | 167 ++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h | 16 - arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c | 69 - arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c | 97 + - arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c | 490 ++++++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c | 71 - arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h | 20 - arch/arm/mach-pxa/spitz.c | 2 - drivers/input/keyboard/Kconfig | 7 - drivers/input/keyboard/Makefile | 2 - drivers/input/keyboard/asic3_keys.c | 131 + - drivers/leds/Kconfig | 7 - drivers/leds/Makefile | 1 - drivers/leds/leds-asic3.c | 189 ++ - drivers/mfd/Kconfig | 10 - drivers/mfd/Makefile | 2 - drivers/mfd/asic3_base.c | 1208 +++++++++++++++ - drivers/mfd/soc-core.c | 106 + - drivers/mfd/soc-core.h | 30 - drivers/mmc/host/Kconfig | 6 - drivers/mmc/host/Makefile | 2 - drivers/mmc/host/asic3_mmc.c | 900 +++++++++++ - drivers/mmc/host/asic3_mmc.h | 25 - drivers/serial/pxa.c | 22 - drivers/video/backlight/Kconfig | 2 - drivers/video/backlight/corgi_bl.c | 4 - include/asm-arm/arch-pxa/clock.h | 27 - include/asm-arm/arch-pxa/htcuniversal-asic.h | 213 ++ - include/asm-arm/arch-pxa/htcuniversal-gpio.h | 220 ++ - include/asm-arm/arch-pxa/htcuniversal-init.h | 14 - include/asm-arm/arch-pxa/htcuniversal.h | 3 - include/asm-arm/arch-pxa/irqs.h | 2 - include/asm-arm/arch-pxa/pxa-pm_ll.h | 6 - include/asm-arm/arch-pxa/pxa-regs.h | 2 - include/asm-arm/arch-pxa/serial.h | 78 - include/asm-arm/arch-pxa/sharpsl.h | 6 - include/asm-arm/hardware/asic3_keys.h | 18 - include/asm-arm/hardware/asic3_leds.h | 34 - include/asm-arm/hardware/ipaq-asic3.h | 602 +++++++ - include/linux/backlight.h | 7 - include/linux/gpiodev.h | 44 - include/linux/input_pda.h | 47 - include/linux/ioport.h | 1 - include/linux/soc/asic3_base.h | 104 + - include/linux/soc/tmio_mmc.h | 17 - 61 files changed, 7475 insertions(+), 14 deletions(-) - -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/Makefile 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,19 @@ -+# -+# Makefile for HTC Universal -+# -+ -+snd-htcuniversal-ak4641-objs := htcuniversal_ak4641.o -+ -+obj-$(CONFIG_MACH_HTCUNIVERSAL) += htcuniversal.o -+obj-$(CONFIG_HTCUNIVERSAL_CORE) += htcuniversal_core.o -+obj-$(CONFIG_HTCUNIVERSAL_POWER) += htcuniversal_power2.o -+obj-$(CONFIG_HTCUNIVERSAL_LCD) += htcuniversal_lcd.o -+obj-$(CONFIG_HTCUNIVERSAL_BACKLIGHT) += htcuniversal_bl.o -+obj-$(CONFIG_HTCUNIVERSAL_TS2) += htcuniversal_ts2.o -+obj-$(CONFIG_HTCUNIVERSAL_BUTTONS) += htcuniversal_buttons.o -+obj-$(CONFIG_HTCUNIVERSAL_BLUETOOTH) += htcuniversal_bt.o -+obj-$(CONFIG_HTCUNIVERSAL_PHONE) += htcuniversal_phone.o -+obj-$(CONFIG_HTCUNIVERSAL_ASIC3_LEDS) += htcuniversal_asic3_leds.o -+obj-$(CONFIG_HTCUNIVERSAL_UDC) += htcuniversal_udc.o -+ -+obj-$(CONFIG_HTCUNIVERSAL_AK4641) += htcuniversal_ak4641.o -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,468 @@ -+/* -+ * Hardware definitions for HTC Universal -+ * -+ * Copyright (c) 2006 Oleg Gusev -+ * -+ * Use consistent with the GNU GPL is permitted, -+ * provided that this copyright notice is -+ * preserved in its entirety in all copies and derived works. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include "../generic.h" -+ -+#include "htcuniversal_bt.h" -+#include "htcuniversal_phone.h" -+#include "tsc2046_ts.h" -+ -+/* -+ * IRDA -+ */ -+ -+static void htcuniversal_irda_transceiver_mode(struct device *dev, int mode) -+{ -+ /* */ -+} -+ -+static struct pxaficp_platform_data htcuniversal_ficp_platform_data = { -+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE, -+ .transceiver_mode = htcuniversal_irda_transceiver_mode, -+}; -+ -+/* -+ * Bluetooth - Relies on other loadable modules, like ASIC3 and Core, -+ * so make the calls indirectly through pointers. Requires that the -+ * htcuniversal_bt module be loaded before any attempt to use -+ * bluetooth (obviously). -+ */ -+ -+static struct htcuniversal_bt_funcs bt_funcs; -+ -+static void -+htcuniversal_bt_configure( int state ) -+{ -+ if (bt_funcs.configure != NULL) -+ bt_funcs.configure( state ); -+} -+ -+static struct htcuniversal_phone_funcs phone_funcs; -+ -+static void -+htcuniversal_phone_configure( int state ) -+{ -+ if (phone_funcs.configure != NULL) -+ phone_funcs.configure( state ); -+} -+ -+//void htcuniversal_ll_pm_init(void); -+ -+extern struct platform_device htcuniversal_bl; -+static struct platform_device htcuniversal_lcd = { .name = "htcuniversal_lcd", }; -+//static struct platform_device htcuniversal_kbd = { .name = "htcuniversal_kbd", }; -+static struct platform_device htcuniversal_buttons = { .name = "htcuniversal_buttons", }; -+//static struct platform_device htcuniversal_ts = { .name = "htcuniversal_ts", }; -+//static struct platform_device htcuniversal_bt = { .name = "htcuniversal_bt", }; -+//static struct platform_device htcuniversal_phone = { .name = "htcuniversal_phone", }; -+static struct platform_device htcuniversal_power = { .name = "htcuniversal_power", }; -+static struct platform_device htcuniversal_udc = { .name = "htcuniversal_udc", }; -+ -+static struct tsc2046_mach_info htcuniversal_ts_platform_data = { -+ .port = 1, -+ .clock = CKEN_SSP1, -+ .pwrbit_X = 1, -+ .pwrbit_Y = 1, -+ .irq = 0 /* asic3 irq */ -+}; -+ -+static struct platform_device htcuniversal_ts = { -+ .name = "htcuniversal_ts", -+ .dev = { -+ .platform_data = &htcuniversal_ts_platform_data, -+ }, -+}; -+ -+ -+/* Bluetooth */ -+ -+static struct platform_device htcuniversal_bt = { -+ .name = "htcuniversal_bt", -+ .id = -1, -+ .dev = { -+ .platform_data = &bt_funcs, -+ }, -+}; -+ -+static struct platform_device htcuniversal_phone = { -+ .name = "htcuniversal_phone", -+ .id = -1, -+ .dev = { -+ .platform_data = &phone_funcs, -+ }, -+}; -+ -+/* PXA2xx Keys */ -+ -+static struct gpio_keys_button htcuniversal_button_table[] = { -+ { KEY_POWER, GPIO_NR_HTCUNIVERSAL_KEY_ON_N, 1 }, -+}; -+ -+static struct gpio_keys_platform_data htcuniversal_pxa_keys_data = { -+ .buttons = htcuniversal_button_table, -+ .nbuttons = ARRAY_SIZE(htcuniversal_button_table), -+}; -+ -+static struct platform_device htcuniversal_pxa_keys = { -+ .name = "gpio-keys", -+ .dev = { -+ .platform_data = &htcuniversal_pxa_keys_data, -+ }, -+ .id = -1, -+}; -+ -+/**************************************************************** -+ * Keyboard -+ ****************************************************************/ -+ -+static struct pxa27x_keyboard_platform_data htcuniversal_kbd = { -+ .nr_rows = 8, -+ .nr_cols = 8, -+ .keycodes = { -+ { -+ /* row 0 */ -+ KEY_ENTER, -+ KEY_MINUS, -+ KEY_ESC, -+ KEY_1, -+ KEY_TAB, -+ KEY_CAPSLOCK, -+ KEY_LEFTSHIFT, -+ KEY_RIGHTALT, /* Fn */ -+ }, { /* row 1 */ -+ KEY_COMMA, -+ KEY_EQUAL, -+ KEY_F1, -+ KEY_2, -+ KEY_Q, -+ KEY_A, -+ KEY_Z, -+ KEY_LEFTCTRL, -+ }, { /* row 2 */ -+ KEY_UP, -+ KEY_I, -+ KEY_F2, -+ KEY_3, -+ KEY_W, -+ KEY_S, -+ KEY_X, -+ KEY_F6, -+ }, { /* row 3 */ -+ KEY_DOT, -+ KEY_O, -+ KEY_F3, -+ KEY_4, -+ KEY_E, -+ KEY_D, -+ KEY_C, -+ KEY_LEFTALT, -+ }, { /* row 4 */ -+ KEY_F9, -+ KEY_P, -+ KEY_F4, -+ KEY_5, -+ KEY_R, -+ KEY_F, -+ KEY_V, -+ KEY_SPACE, -+ }, { /* row 5 */ -+ KEY_RIGHT, -+ KEY_BACKSPACE, -+ KEY_F5, -+ KEY_6, -+ KEY_T, -+ KEY_G, -+ KEY_B, -+ KEY_F7, -+ }, { /* row 6 */ -+ KEY_F9, -+ KEY_K, -+ KEY_9, -+ KEY_7, -+ KEY_Y, -+ KEY_H, -+ KEY_N, -+ KEY_LEFT, -+ }, { /* row 7 */ -+ KEY_F10, -+ KEY_L, -+ KEY_0, -+ KEY_8, -+ KEY_U, -+ KEY_J, -+ KEY_M, -+ KEY_DOWN, -+ }, -+ }, -+ .gpio_modes = { -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN0_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN1_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN2_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN3_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN4_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN5_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN6_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN7_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT0_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT1_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT2_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT3_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT4_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT5_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT6_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT7_MD, -+ }, -+}; -+ -+static struct platform_device htcuniversal_pxa_keyboard = { -+ .name = "pxa27x-keyboard", -+ .id = -1, -+ .dev = { -+ .platform_data = &htcuniversal_kbd, -+ }, -+}; -+/* Core Hardware Functions */ -+ -+struct platform_device htcuniversal_core = { -+ .name = "htcuniversal_core", -+ .id = 0, -+ .dev = { -+ .platform_data = NULL, -+ }, -+}; -+ -+static struct platform_device *devices[] __initdata = { -+ &htcuniversal_core, -+// &htcuniversal_flash, -+ &htcuniversal_pxa_keyboard, -+ &htcuniversal_pxa_keys, -+}; -+ -+static struct platform_device *htcuniversal_asic3_devices[] __initdata = { -+ &htcuniversal_lcd, -+#ifdef CONFIG_HTCUNIVERSAL_BACKLIGHT -+ &htcuniversal_bl, -+#endif -+ &htcuniversal_buttons, -+ &htcuniversal_ts, -+ &htcuniversal_bt, -+ &htcuniversal_phone, -+ &htcuniversal_power, -+ &htcuniversal_udc, -+}; -+ -+static struct asic3_platform_data htcuniversal_asic3_platform_data = { -+ -+ /* Setting ASIC3 GPIO registers to the below initialization states -+ * HTC Universal asic3 information: -+ * http://wiki.xda-developers.com/index.php?pagename=UniversalASIC3 -+ * http://wiki.xda-developers.com/index.php?pagename=ASIC3 -+ * -+ * dir: Direction of the GPIO pin. 0: input, 1: output. -+ * If unknown, set as output to avoid power consuming floating input nodes -+ * init: Initial state of the GPIO bits -+ * -+ * These registers are configured as they are on Wince. -+ */ -+ .gpio_a = { -+ .dir = (1<> 18) & 0xfffc, -+ .boot_params = 0xa0000100, -+ .map_io = htcuniversal_map_io, -+ .init_irq = htcuniversal_init_irq, -+ .init_machine = htcuniversal_init, -+ .timer = &pxa_timer, -+MACHINE_END -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,917 @@ -+/* -+ * Audio support for codec Asahi Kasei AK4641 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Copyright (c) 2006 Giorgio Padrin -+ * -+ * History: -+ * -+ * 2006-03 Written -- Giorgio Padrin -+ * 2006-09 Test and debug on machine (HP hx4700) -- Elshin Roman -+ * -+ * AK4641 codec device driver -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * Based on code: -+ * Copyright (c) 2002 Hewlett-Packard Company -+ * Copyright (c) 2000 Nicolas Pitre -+ * Copyright (c) 2000 Lernout & Hauspie Speech Products, N.V. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License. -+ */ -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "htcuniversal_ak4641.h" -+ -+/* Registers */ -+#define R_PM1 0x00 -+#define R_PM2 0x01 -+#define R_SEL1 0x02 -+#define R_SEL2 0x03 -+#define R_MODE1 0x04 -+#define R_MODE2 0x05 -+#define R_DAC 0x06 -+#define R_MIC 0x07 -+#define REG_TIMER 0x08 -+#define REG_ALC1 0x09 -+#define REG_ALC2 0x0a -+#define R_PGA 0x0b -+#define R_ATTL 0x0c -+#define R_ATTR 0x0d -+#define REG_VOL 0x0e -+#define R_STATUS 0x0f -+#define REG_EQLO 0x10 -+#define REG_EQMID 0x11 -+#define REG_EQHI 0x12 -+#define REG_BTIF 0x13 -+ -+/* Register flags */ -+/* REG_PWR1 */ -+#define R_PM1_PMADC 0x01 -+#define R_PM1_PMMIC 0x02 -+#define REG_PWR1_PMAUX 0x04 -+#define REG_PWR1_PMMO 0x08 -+#define R_PM1_PMLO 0x10 -+/* unused 0x20 */ -+/* unused 0x40 */ -+#define R_PM1_PMVCM 0x80 -+ -+/* REG_PWR2 */ -+#define R_PM2_PMDAC 0x01 -+/* unused 0x02 */ -+/* unused 0x04 */ -+#define R_PM2_PMMO2 0x08 -+#define REG_PWR2_MCKAC 0x10 -+/* unused 0x20 */ -+/* unused 0x40 */ -+#define R_PM2_MCKPD 0x80 -+ -+/* REG_SEL1 */ -+#define R_SEL1_PSMO2 0x01 -+/* unused 0x02 */ -+/* unused 0x04 */ -+/* unused 0x08 */ -+#define REG_SEL1_MICM 0x10 -+#define REG_SEL1_DACM 0x20 -+#define REG_SEL1_PSMO 0x40 -+#define REG_SEL1_MOGN 0x80 -+ -+/* REG_SEL2 */ -+#define R_SEL2_PSLOR 0x01 -+#define R_SEL2_PSLOL 0x02 -+#define REG_SEL2_AUXSI 0x04 -+/* unused 0x08 */ -+#define REG_SEL2_MICL 0x10 -+#define REG_SEL2_AUXL 0x20 -+/* unused 0x40 */ -+#define R_SEL2_DACL 0x80 -+ -+/* REG_MODE1 */ -+#define REG_MODE1_DIF0 0x01 -+#define REG_MODE1_DIF1 0x02 -+/* unused 0x04 */ -+/* unused 0x08 */ -+/* unused 0x10 */ -+/* unused 0x20 */ -+/* unused 0x40 */ -+/* unused 0x80 */ -+ -+/* REG_MODE2 */ -+/* unused 0x01 */ -+#define REG_MODE2_LOOP 0x02 -+#define REG_MODE2_HPM 0x04 -+/* unused 0x08 */ -+/* unused 0x10 */ -+#define REG_MODE2_MCK0 0x20 -+#define REG_MODE2_MCK1 0x40 -+/* unused 0x80 */ -+ -+/* REG_DAC */ -+#define REG_DAC_DEM0 0x01 -+#define REG_DAC_DEM1 0x02 -+#define REG_DAC_EQ 0x04 -+/* unused 0x08 */ -+#define R_DAC_DATTC 0x10 -+#define R_DAC_SMUTE 0x20 -+#define REG_DAC_TM 0x40 -+/* unused 0x80 */ -+ -+/* REG_MIC */ -+#define R_MIC_MGAIN 0x01 -+#define R_MIC_MSEL 0x02 -+#define R_MIC_MICAD 0x04 -+#define R_MIC_MPWRI 0x08 -+#define R_MIC_MPWRE 0x10 -+#define REG_MIC_AUXAD 0x20 -+/* unused 0x40 */ -+/* unused 0x80 */ -+ -+/* REG_TIMER */ -+ -+#define REG_TIMER_LTM0 0x01 -+#define REG_TIMER_LTM1 0x02 -+#define REG_TIMER_WTM0 0x04 -+#define REG_TIMER_WTM1 0x08 -+#define REG_TIMER_ZTM0 0x10 -+#define REG_TIMER_ZTM1 0x20 -+/* unused 0x40 */ -+/* unused 0x80 */ -+ -+#define REG_ALC1_LMTH 0x01 -+#define REG_ALC1_RATT 0x02 -+#define REG_ALC1_LMAT0 0x04 -+#define REG_ALC1_LMAT1 0x08 -+#define REG_ALC1_ZELM 0x10 -+#define REG_ALC1_ALC1 0x20 -+/* unused 0x40 */ -+/* unused 0x80 */ -+ -+/* REG_ALC2 */ -+ -+/* REG_PGA */ -+ -+/* REG_ATTL */ -+ -+/* REG_ATTR */ -+ -+/* REG_VOL */ -+#define REG_VOL_ATTM 0x80 -+ -+/* REG_STATUS */ -+#define R_STATUS_DTMIC 0x01 -+ -+/* REG_EQ controls use 4 bits for each of 5 EQ levels */ -+ -+/* Bluetooth not yet implemented */ -+#define REG_BTIF_PMAD2 0x01 -+#define REG_BTIF_PMDA2 0x02 -+#define REG_BTIF_PMBIF 0x04 -+#define REG_BTIF_ADC2 0x08 -+#define REG_BTIF_DAC2 0x10 -+#define REG_BTIF_BTFMT0 0x20 -+#define REG_BTIF_BTFMT1 0x40 -+/* unused 0x80 */ -+ -+/* begin {{ I2C }} */ -+ -+static struct i2c_driver snd_ak4641_i2c_driver = { -+ .driver = { -+ .name = "ak4641-i2c" -+ }, -+}; -+ -+static int snd_ak4641_i2c_init(void) -+{ -+ return i2c_add_driver(&snd_ak4641_i2c_driver); -+} -+ -+static void snd_ak4641_i2c_free(void) -+{ -+ i2c_del_driver(&snd_ak4641_i2c_driver); -+} -+ -+static inline int snd_ak4641_i2c_probe(struct snd_ak4641 *ak) -+{ -+ if (ak->i2c_client.adapter == NULL) return -EINVAL; -+ ak->i2c_client.addr = 0x12; -+ if (i2c_smbus_xfer(ak->i2c_client.adapter, ak->i2c_client.addr, -+ 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0) -+ return -ENODEV; -+ else return 0; -+} -+ -+static int snd_ak4641_i2c_attach(struct snd_ak4641 *ak) -+{ -+ int ret = 0; -+ if ((ret = snd_ak4641_i2c_probe(ak)) < 0) return ret; -+ snprintf(ak->i2c_client.name, sizeof(ak->i2c_client.name), -+ "ak4641-i2c at %d-%04x", -+ i2c_adapter_id(ak->i2c_client.adapter), ak->i2c_client.addr); -+ return i2c_attach_client(&ak->i2c_client); -+} -+ -+static void snd_ak4641_i2c_detach(struct snd_ak4641 *ak) -+{ -+ i2c_detach_client(&ak->i2c_client); -+} -+ -+/* end {{ I2C }} */ -+ -+ -+/* begin {{ Registers & Cache Ops }} */ -+ -+static int snd_ak4641_hwsync(struct snd_ak4641 *ak, int read, u8 reg) -+{ -+ struct i2c_msg msgs[2]; -+ u8 buf[2]; -+ int ret; -+ -+ snd_assert(reg < ARRAY_SIZE(ak->regs), return -EINVAL); -+ -+ /* setup i2c msgs */ -+ msgs[0].addr = ak->i2c_client.addr; -+ msgs[0].flags = 0; -+ msgs[0].buf = buf; -+ if (!read) -+ msgs[0].len = 2; -+ else { -+ msgs[1].flags = I2C_M_RD; -+ msgs[1].addr = msgs[0].addr; -+ msgs[1].buf = msgs[0].buf + 1; -+ msgs[0].len = 1; -+ msgs[1].len = 1; -+ } -+ -+ buf[0] = reg; -+ -+ /* regs[reg] -> buffer, on write */ -+ if (!read) buf[1] = ak->regs[reg]; -+ -+ /* i2c transfer */ -+ ret = i2c_transfer(ak->i2c_client.adapter, msgs, read ? 2 : 1); -+ if (ret != (read ? 2 : 1)) return ret; /* transfer error */ //@@ error ret < 0, or not ? -+ -+ /* regs[reg] <- buffer, on read */ -+ if (read) ak->regs[reg] = buf[1]; -+ -+ return 0; -+} -+ -+static inline int snd_ak4641_hwsync_read(struct snd_ak4641 *ak, u8 reg) -+{ -+ return snd_ak4641_hwsync(ak, 1, reg); -+} -+ -+static inline int snd_ak4641_hwsync_write(struct snd_ak4641 *ak, u8 reg) -+{ -+ return snd_ak4641_hwsync(ak, 0, reg); -+} -+ -+static int snd_ak4641_hwsync_read_all(struct snd_ak4641 *ak) -+{ -+ u8 reg; -+ for (reg = 0; reg < ARRAY_SIZE(ak->regs); reg++) -+ if (snd_ak4641_hwsync_read(ak, reg) < 0) return -1; -+ return 0; -+} -+ -+static int snd_ak4641_hwsync_write_all(struct snd_ak4641 *ak) -+{ -+ u8 reg; -+ for (reg = 0; reg < ARRAY_SIZE(ak->regs); reg++) -+ if (snd_ak4641_hwsync_write(ak, reg) < 0) return -1; -+ return 0; -+} -+ -+static int snd_ak4641_reg_changed(struct snd_ak4641 *ak, u8 reg) -+{ -+ if ((reg != R_PGA && ak->powered_on) || -+ (reg == R_PGA && (ak->regs[R_PM1] & R_PM1_PMMIC))) -+ return snd_ak4641_hwsync_write(ak, reg); -+ return 0; -+} -+ -+/* end {{ Registers & Cache Ops }}*/ -+ -+ -+static inline void snd_ak4641_lock(struct snd_ak4641 *ak) -+{ -+ down(&ak->sem); -+} -+ -+static inline void snd_ak4641_unlock(struct snd_ak4641 *ak) -+{ -+ up(&ak->sem); -+} -+ -+#define WRITE_MASK(i, val, mask) (((i) & ~(mask)) | ((val) & (mask))) -+ -+ -+/* begin {{ Controls }} */ -+ -+#define INV_RANGE(val, mask) \ -+ (~(val) & (mask)) -+ -+/*-begin----------------------------------------------------------*/ -+static int snd_ak4641_actl_playback_volume_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; -+ uinfo->count = 2; -+ uinfo->value.integer.min = 0; -+ uinfo->value.integer.max = 0xff; -+ return 0; -+} -+ -+static int snd_ak4641_actl_playback_volume_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ -+ snd_ak4641_lock(ak); -+ ucontrol->value.integer.value[0] = INV_RANGE(ak->regs[R_ATTL], 0xff); -+ ucontrol->value.integer.value[1] = INV_RANGE(ak->regs[R_ATTR], 0xff); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+static int snd_ak4641_actl_playback_volume_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ -+ snd_ak4641_lock(ak); -+ ak->regs[R_ATTL] = INV_RANGE(ucontrol->value.integer.value[0], 0xff); -+ ak->regs[R_ATTR] = INV_RANGE(ucontrol->value.integer.value[1], 0xff); -+ snd_ak4641_reg_changed(ak, R_ATTL); -+ snd_ak4641_reg_changed(ak, R_ATTR); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+/*-end------------------------------------------------------------*/ -+ -+/*-begin----------------------------------------------------------*/ -+static int snd_ak4641_actl_mic_gain_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; -+ uinfo->count = 1; -+ uinfo->value.integer.min = 0; -+ uinfo->value.integer.max = 0x7f; -+ return 0; -+} -+ -+static int snd_ak4641_actl_mic_gain_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ -+ ucontrol->value.integer.value[0] = ak->regs[R_PGA]; -+ return 0; -+} -+ -+static int snd_ak4641_actl_mic_gain_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ -+ snd_ak4641_lock(ak); -+ ak->regs[R_PGA] = ucontrol->value.integer.value[0]; -+ snd_ak4641_reg_changed(ak, R_PGA); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+/*-end------------------------------------------------------------*/ -+ -+#define ACTL(ctl_name, _name) \ -+static struct snd_kcontrol_new snd_ak4641_actl_ ## ctl_name = \ -+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = _name, \ -+ .info = snd_ak4641_actl_ ## ctl_name ## _info, \ -+ .get = snd_ak4641_actl_ ## ctl_name ## _get, .put = snd_ak4641_actl_ ## ctl_name ## _put }; -+ -+ACTL(playback_volume, "Master Playback Volume") -+ACTL(mic_gain, "Mic Capture Gain") -+ -+struct snd_ak4641_uctl_bool { -+ int (*get) (struct snd_ak4641 *uda); -+ int (*set) (struct snd_ak4641 *uda, int on); -+}; -+ -+static int snd_ak4641_actl_bool_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; -+ uinfo->count = 1; -+ return 0; -+} -+ -+static int snd_ak4641_actl_bool_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ struct snd_ak4641_uctl_bool *uctl = -+ (struct snd_ak4641_uctl_bool *) kcontrol->private_value; -+ -+ ucontrol->value.integer.value[0] = uctl->get(ak); -+ return 0; -+} -+ -+static int snd_ak4641_actl_bool_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ struct snd_ak4641_uctl_bool *uctl = -+ (struct snd_ak4641_uctl_bool *) kcontrol->private_value; -+ -+ return uctl->set(ak, ucontrol->value.integer.value[0]); -+} -+ -+/*-begin----------------------------------------------------------*/ -+static int snd_ak4641_uctl_playback_switch_get(struct snd_ak4641 *ak) -+{ -+ return (ak->regs[R_DAC] & R_DAC_SMUTE) == 0x00; -+} -+ -+static int snd_ak4641_uctl_playback_switch_set(struct snd_ak4641 *ak, int on) -+{ -+ snd_ak4641_lock(ak); -+ ak->regs[R_DAC] = WRITE_MASK(ak->regs[R_DAC], -+ on ? 0x00 : R_DAC_SMUTE, R_DAC_SMUTE); -+ snd_ak4641_reg_changed(ak, R_DAC); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+/*-end------------------------------------------------------------*/ -+ -+/*-begin----------------------------------------------------------*/ -+static int snd_ak4641_uctl_mic_boost_get(struct snd_ak4641 *ak) -+{ -+ return (ak->regs[R_MIC] & R_MIC_MGAIN) == R_MIC_MGAIN; -+} -+ -+static int snd_ak4641_uctl_mic_boost_set(struct snd_ak4641 *ak, int on) -+{ -+ snd_ak4641_lock(ak); -+ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], -+ on ? R_MIC_MGAIN : 0x00, R_MIC_MGAIN); -+ snd_ak4641_reg_changed(ak, R_MIC); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+/*-end------------------------------------------------------------*/ -+ -+/*-begin----------------------------------------------------------*/ -+static int snd_ak4641_uctl_mono_out_get(struct snd_ak4641 *ak) -+{ -+ printk("mono_out status 0x%8.8x -> 0x%8.8x\n",ak->regs[R_SEL1], ak->regs[R_SEL1] & REG_SEL1_PSMO); -+ return (ak->regs[R_SEL1] & REG_SEL1_PSMO) == REG_SEL1_PSMO; -+} -+ -+static int snd_ak4641_uctl_mono_out_set(struct snd_ak4641 *ak, int on) -+{ -+ printk("phone mic enable called. on=%d\n",on); -+ snd_ak4641_lock(ak); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], on ? R_PM1_PMMIC : 0x00, R_PM1_PMMIC); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], on ? REG_PWR1_PMMO : 0x00, REG_PWR1_PMMO); -+ snd_ak4641_reg_changed(ak, R_PM1); -+ -+ snd_ak4641_hwsync_write(ak, R_PGA); /* mic PGA gain is reset when PMMIC = 0 */ -+ -+ /* internal mic */ -+ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], on ? R_MIC_MPWRI : 0x0, R_MIC_MPWRI); -+ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], 0x0, R_MIC_MSEL); -+ snd_ak4641_hwsync_write(ak, R_MIC); -+ -+// ak->regs[REG_BTIF] = WRITE_MASK(ak->regs[REG_BTIF], 0x0, REG_BTIF_DAC2); -+// snd_ak4641_hwsync_write(ak, REG_BTIF); -+ /* */ -+// ak->regs[REG_VOL] = WRITE_MASK(ak->regs[REG_VOL], on ? REG_VOL_ATTM : 0x00, REG_VOL_ATTM); -+// ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_MOGN : 0x00, REG_SEL1_MOGN); -+ ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_MICM : 0x00, REG_SEL1_MICM); -+ ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_PSMO : 0x00, REG_SEL1_PSMO); -+ snd_ak4641_reg_changed(ak, R_SEL1); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+/*-end------------------------------------------------------------*/ -+ -+#define ACTL_BOOL(ctl_name, _name) \ -+static struct snd_ak4641_uctl_bool snd_ak4641_actl_ ## ctl_name ## _pvalue = \ -+{ .get = snd_ak4641_uctl_ ## ctl_name ## _get, \ -+ .set = snd_ak4641_uctl_ ## ctl_name ## _set }; \ -+static struct snd_kcontrol_new snd_ak4641_actl_ ## ctl_name = \ -+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = _name, .info = snd_ak4641_actl_bool_info, \ -+ .get = snd_ak4641_actl_bool_get, .put = snd_ak4641_actl_bool_put, \ -+ .private_value = (unsigned long) &snd_ak4641_actl_ ## ctl_name ## _pvalue }; -+ -+ACTL_BOOL(playback_switch, "Master Playback Switch") -+ACTL_BOOL(mic_boost, "Mic Boost (+20dB)") -+ACTL_BOOL(mono_out, "Phone mic enable") -+ -+static void snd_ak4641_headphone_on(struct snd_ak4641 *ak, int on); -+static void snd_ak4641_speaker_on(struct snd_ak4641 *ak, int on); -+static void snd_ak4641_select_mic(struct snd_ak4641 *ak); -+ -+void snd_ak4641_hp_connected(struct snd_ak4641 *ak, int connected) -+{ -+ snd_ak4641_lock(ak); -+ if (connected != ak->hp_connected) { -+ ak->hp_connected = connected; -+ -+ /* headphone or speaker, on playback */ -+ if (ak->playback_on) { -+ if (connected) { -+ snd_ak4641_headphone_on(ak, 1); -+ snd_ak4641_speaker_on(ak, 0); -+ } else { -+ snd_ak4641_speaker_on(ak, 1); -+ snd_ak4641_headphone_on(ak, 0); -+ } -+ } -+ -+ /* headset or internal mic, on capture */ -+ if (ak->capture_on) -+ snd_ak4641_select_mic(ak); -+ } -+ snd_ak4641_unlock(ak); -+} -+ -+/* end {{ Controls }} */ -+ -+ -+/* begin {{ Headphone Detected Notification }} */ -+ -+static void snd_ak4641_hp_detected_w_fn(void *p) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *)p; -+ -+ snd_ak4641_hp_connected(ak, ak->hp_detected.detected); -+} -+ -+void snd_ak4641_hp_detected(struct snd_ak4641 *ak, int detected) -+{ -+ if (detected != ak->hp_detected.detected) { -+ ak->hp_detected.detected = detected; -+ queue_work(ak->hp_detected.wq, &ak->hp_detected.w); -+ } -+} -+ -+static int snd_ak4641_hp_detected_init(struct snd_ak4641 *ak) -+{ -+ INIT_WORK(&ak->hp_detected.w, snd_ak4641_hp_detected_w_fn); -+ ak->hp_detected.detected = ak->hp_connected; -+ ak->hp_detected.wq = create_singlethread_workqueue("ak4641"); -+ if (ak->hp_detected.wq) return 0; -+ else return -1; -+} -+ -+static void snd_ak4641_hp_detected_free(struct snd_ak4641 *ak) -+{ -+ destroy_workqueue(ak->hp_detected.wq); -+} -+ -+/* end {{ Headphone Detected Notification }} */ -+ -+ -+/* begin {{ Codec Control }} */ -+ -+static void snd_ak4641_headphone_on(struct snd_ak4641 *ak, int on) -+{ -+ if (on) { -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ ak->headphone_out_on(1); -+ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], -+ R_SEL2_PSLOL | R_SEL2_PSLOR, -+ R_SEL2_PSLOL | R_SEL2_PSLOR); -+ snd_ak4641_hwsync_write(ak, R_SEL2); -+ } else { -+ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], -+ 0x00, R_SEL2_PSLOL | R_SEL2_PSLOR); -+ snd_ak4641_hwsync_write(ak, R_SEL2); -+ ak->headphone_out_on(0); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ } -+} -+ -+static void snd_ak4641_speaker_on(struct snd_ak4641 *ak, int on) -+{ -+ if (on) { -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ ak->speaker_out_on(1); -+ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], -+ R_SEL2_PSLOL | R_SEL2_PSLOR, -+ R_SEL2_PSLOL | R_SEL2_PSLOR); -+ snd_ak4641_hwsync_write(ak, R_SEL2); -+ } else { -+ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], -+ 0x00, R_SEL2_PSLOL | R_SEL2_PSLOR); -+ snd_ak4641_hwsync_write(ak, R_SEL2); -+ ak->speaker_out_on(0); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ } -+} -+ -+static inline int snd_ak4641_power_on(struct snd_ak4641 *ak) -+{ -+ ak->reset_pin(1); -+ ak->power_on_chip(1); -+ msleep(1); -+ ak->reset_pin(0); -+ ak->powered_on = 1; -+ return 0; -+} -+ -+static inline int snd_ak4641_power_off(struct snd_ak4641 *ak) -+{ -+ ak->powered_on = 0; -+ ak->power_on_chip(0); -+ return 0; -+} -+ -+static inline void snd_ak4641_headphone_out_on(struct snd_ak4641 *ak, int on) -+{ -+ if (ak->headphone_out_on) ak->headphone_out_on(on); -+} -+ -+static inline void snd_ak4641_speaker_out_on(struct snd_ak4641 *ak, int on) -+{ -+ if (ak->speaker_out_on) ak->speaker_out_on(on); -+} -+ -+static int snd_ak4641_playback_on(struct snd_ak4641 *ak) -+{ -+ if (ak->playback_on) return 0; -+ -+ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], -+ R_PM2_PMDAC, R_PM2_MCKPD | R_PM2_PMDAC); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO); -+ snd_ak4641_hwsync_write(ak, R_PM2); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ if (ak->hp_connected) snd_ak4641_headphone_on(ak, 1); -+ else snd_ak4641_speaker_on(ak, 1); -+ -+ ak->playback_on = 1; -+ -+ return 0; -+} -+ -+static int snd_ak4641_playback_off(struct snd_ak4641 *ak) -+{ -+ if (!ak->playback_on) return 0; -+ -+ ak->playback_on = 0; -+ -+ if (ak->hp_connected) snd_ak4641_headphone_on(ak, 0); -+ else snd_ak4641_speaker_on(ak, 0); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO); -+ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], -+ (!ak->capture_on ? R_PM2_MCKPD : 0x00) | R_PM2_PMDAC, -+ R_PM2_MCKPD | R_PM2_PMDAC); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ snd_ak4641_hwsync_write(ak, R_PM2); -+ -+ return 0; -+} -+ -+static void snd_ak4641_select_mic(struct snd_ak4641 *ak) -+{ -+ int mic = 0; -+ u8 r_mic; -+ -+ if (ak->hp_connected) { -+ /* check headset mic */ -+ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], R_MIC_MPWRE, R_MIC_MPWRE); -+ snd_ak4641_hwsync_write(ak, R_MIC); -+ snd_ak4641_hwsync_read(ak, R_STATUS); -+ mic = (ak->regs[R_STATUS] & R_STATUS_DTMIC) == R_STATUS_DTMIC; -+ -+ printk("htcuniversal_ak4641_select_mic: mic=%d\n",mic); -+ -+ r_mic = WRITE_MASK(ak->regs[R_MIC], -+ R_MIC_MSEL | (ak->capture_on ? R_MIC_MPWRE : 0x00), -+ R_MIC_MSEL | R_MIC_MPWRI | R_MIC_MPWRE); -+ } -+ else -+ r_mic = WRITE_MASK(ak->regs[R_MIC], -+ 0x00 | (ak->capture_on ? R_MIC_MPWRI : 0x00), -+ R_MIC_MSEL | R_MIC_MPWRI | R_MIC_MPWRE); -+ -+ if (r_mic != ak->regs[R_MIC]) { -+ ak->regs[R_MIC] = r_mic; -+ snd_ak4641_hwsync_write(ak, R_MIC); -+ } -+} -+ -+static int snd_ak4641_capture_on(struct snd_ak4641 *ak) -+{ -+ if (ak->capture_on) return 0; -+ -+ if (!ak->playback_on) { -+ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], 0x00, R_PM2_MCKPD); -+ snd_ak4641_hwsync_write(ak, R_PM2); -+ } -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMMIC | R_PM1_PMADC, -+ R_PM1_PMMIC | R_PM1_PMADC); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ snd_ak4641_hwsync_write(ak, R_PGA); /* mic PGA gain is reset when PMMIC = 0 */ -+ -+ ak->capture_on = 1; -+ -+ snd_ak4641_select_mic(ak); -+ -+ msleep(47); /* accounts for ADC init cycle, time enough for fs >= 44.1 kHz */ -+ -+ return 0; -+} -+ -+static int snd_ak4641_capture_off(struct snd_ak4641 *ak) -+{ -+ if (!ak->capture_on) return 0; -+ -+ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], -+ 0x00, R_MIC_MPWRI | R_MIC_MPWRE | R_MIC_MSEL); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMMIC | R_PM1_PMADC); -+ snd_ak4641_hwsync_write(ak, R_MIC); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ if (!ak->playback_on) { -+ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], R_PM2_MCKPD, R_PM2_MCKPD); -+ snd_ak4641_hwsync_write(ak, R_PM2); -+ } -+ -+ ak->capture_on = 0; -+ -+ return 0; -+} -+ -+int snd_ak4641_open_stream(struct snd_ak4641 *ak, int stream) -+{ -+ snd_ak4641_lock(ak); -+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) { -+ ak->playback_stream_opened = 1; -+ snd_ak4641_playback_on(ak); -+ } else { -+ ak->capture_stream_opened = 1; -+ snd_ak4641_capture_on(ak); -+ } -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+int snd_ak4641_close_stream(struct snd_ak4641 *ak, int stream) -+{ -+ snd_ak4641_lock(ak); -+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) { -+ ak->playback_stream_opened = 0; -+ snd_ak4641_playback_off(ak); -+ } else { -+ ak->capture_stream_opened = 0; -+ snd_ak4641_capture_off(ak); -+ } -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+static int snd_ak4641_init_regs(struct snd_ak4641 *ak) -+{ -+ snd_ak4641_hwsync_read_all(ak); -+ -+ //@@ MEMO: add some configs -+ -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMVCM, R_PM1_PMVCM); -+ ak->regs[R_DAC] = WRITE_MASK(ak->regs[R_DAC], 0x00, R_DAC_DATTC); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ snd_ak4641_hwsync_write(ak, R_DAC); -+ -+ return 0; -+} -+ -+int snd_ak4641_suspend(struct snd_ak4641 *ak, pm_message_t state) -+{ -+ snd_ak4641_lock(ak); -+ if (ak->playback_on) snd_ak4641_playback_off(ak); -+ if (ak->capture_on) snd_ak4641_capture_off(ak); -+ snd_ak4641_power_off(ak); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+int snd_ak4641_resume(struct snd_ak4641 *ak) -+{ -+ snd_ak4641_lock(ak); -+ snd_ak4641_power_on(ak); -+ snd_ak4641_hwsync_write_all(ak); -+ if (ak->playback_stream_opened) snd_ak4641_playback_on(ak); -+ if (ak->capture_stream_opened) snd_ak4641_capture_on(ak); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+static void snd_ak4641_init_ak(struct snd_ak4641 *ak) -+{ -+ init_MUTEX(&ak->sem); -+ ak->i2c_client.driver = &snd_ak4641_i2c_driver; -+} -+ -+int snd_ak4641_activate(struct snd_ak4641 *ak) -+{ -+ int ret = 0; -+ -+ snd_ak4641_init_ak(ak); -+ snd_ak4641_lock(ak); -+ snd_ak4641_power_on(ak); -+ if ((ret = snd_ak4641_i2c_attach(ak)) < 0) -+ goto failed_i2c_attach; -+ snd_ak4641_init_regs(ak); -+ if ((ret = snd_ak4641_hp_detected_init(ak)) < 0) -+ goto failed_hp_detected_init; -+ snd_ak4641_unlock(ak); -+ return 0; -+ -+ failed_hp_detected_init: -+ snd_ak4641_i2c_detach(ak); -+ failed_i2c_attach: -+ snd_ak4641_power_off(ak); -+ snd_ak4641_unlock(ak); -+ return ret; -+} -+ -+void snd_ak4641_deactivate(struct snd_ak4641 *ak) -+{ -+ snd_ak4641_lock(ak); -+ snd_ak4641_hp_detected_free(ak); -+ snd_ak4641_i2c_detach(ak); -+ snd_ak4641_power_off(ak); -+ snd_ak4641_unlock(ak); -+} -+ -+int snd_ak4641_add_mixer_controls(struct snd_ak4641 *ak, struct snd_card *card) -+{ -+ snd_ak4641_lock(ak); -+ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_playback_volume, ak)); -+ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_playback_switch, ak)); -+ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mic_gain, ak)); -+ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mic_boost, ak)); -+ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mono_out, ak)); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+/* end {{ Codec Control }} */ -+ -+ -+/* begin {{ Module }} */ -+ -+static int __init snd_ak4641_module_on_load(void) -+{ -+ snd_ak4641_i2c_init(); -+ return 0; -+} -+ -+static void __exit snd_ak4641_module_on_unload(void) -+{ -+ snd_ak4641_i2c_free(); -+} -+ -+module_init(snd_ak4641_module_on_load); -+module_exit(snd_ak4641_module_on_unload); -+ -+EXPORT_SYMBOL(snd_ak4641_activate); -+EXPORT_SYMBOL(snd_ak4641_deactivate); -+EXPORT_SYMBOL(snd_ak4641_add_mixer_controls); -+EXPORT_SYMBOL(snd_ak4641_open_stream); -+EXPORT_SYMBOL(snd_ak4641_close_stream); -+EXPORT_SYMBOL(snd_ak4641_suspend); -+EXPORT_SYMBOL(snd_ak4641_resume); -+EXPORT_SYMBOL(snd_ak4641_hp_connected); -+EXPORT_SYMBOL(snd_ak4641_hp_detected); -+ -+MODULE_AUTHOR("Giorgio Padrin"); -+MODULE_DESCRIPTION("Audio support for codec Asahi Kasei AK4641"); -+MODULE_LICENSE("GPL"); -+ -+/* end {{ Module }} */ -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,65 @@ -+/* -+ * Audio support for codec Asahi Kasei AK4641 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Copyright (c) 2006 Giorgio Padrin -+ */ -+ -+#ifndef __SOUND_AK4641_H -+#define __SOUND_AK4641_H -+ -+#include -+ -+struct snd_ak4641 { -+ struct semaphore sem; -+ -+ u8 regs[0x14]; /* registers cache */ -+ -+ unsigned int -+ powered_on:1, -+ playback_on:1, -+ playback_stream_opened:1, -+ capture_on:1, -+ capture_stream_opened:1; -+ -+ unsigned int -+ hp_connected:1; -+ -+ /* -- configuration (to fill before activation) -- */ -+ void (*power_on_chip)(int on); -+ void (*reset_pin)(int on); -+ void (*headphone_out_on)(int on); -+ void (*speaker_out_on)(int on); -+ -+ struct i2c_client i2c_client; /* to fill .adapter */ -+ /* ----------------------------------------------- */ -+ -+ struct { -+ int detected; -+ struct workqueue_struct *wq; -+ struct work_struct w; -+ } hp_detected; -+}; -+ -+ -+/* Note: opening, closing, suspending and resuming a stream -+ * require the clocks (MCLK and I2S ones) running -+ */ -+ -+/* don't forget to specify I2C adapter in i2c_client field */ -+int snd_ak4641_activate(struct snd_ak4641 *ak); -+ -+void snd_ak4641_deactivate(struct snd_ak4641 *ak); -+int snd_ak4641_add_mixer_controls(struct snd_ak4641 *ak, struct snd_card *card); -+int snd_ak4641_open_stream(struct snd_ak4641 *ak, int stream); -+int snd_ak4641_close_stream(struct snd_ak4641 *ak, int stream); -+int snd_ak4641_suspend(struct snd_ak4641 *ak, pm_message_t state); -+int snd_ak4641_resume(struct snd_ak4641 *ak); -+ -+void snd_ak4641_hp_connected(struct snd_ak4641 *ak, int connected); /* non atomic context */ -+void snd_ak4641_hp_detected(struct snd_ak4641 *ak, int detected); /* atomic context */ -+ -+#endif /* __SOUND_AK4641_H */ -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,143 @@ -+/* -+ * LEDs support for the HP iPaq hx4700 -+ * -+ * Copyright (c) 2006 Anton Vorontsov -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+//FIXME -+//DEFINE_LED_TRIGGER_SHARED_GLOBAL(htcuniversal_radio_trig); -+//EXPORT_LED_TRIGGER_SHARED(htcuniversal_radio_trig); -+ -+static struct asic3_led htcuniversal_leds[] = { -+ { -+ .led_cdev = { -+ .name = "htcuniversal:red", -+ .default_trigger = "htcuniversal-charging", -+ }, -+ .hw_num = 2, -+ -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:green", -+ .default_trigger = "htcuniversal-chargefull", -+ }, -+ .hw_num = 1, -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:wifi-bt", -+ .default_trigger = "htcuniversal-radio", -+ }, -+ .hw_num = 0, -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:phonebuttons", -+ .default_trigger = "htcuniversal-phonebuttons", -+ }, -+ .hw_num = -1, -+ .gpio_num = ('D'-'A')*16+GPIOD_BL_KEYP_PWR_ON, -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:vibra", -+ .default_trigger = "htcuniversal-vibra", -+ }, -+ .hw_num = -1, -+ .gpio_num = ('D'-'A')*16+GPIOD_VIBRA_PWR_ON, -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:flashlight1", -+ .default_trigger = "htcuniversal-flashlight1", -+ }, -+ .hw_num = -1, -+ .gpio_num = ('A'-'A')*16+GPIOA_FLASHLIGHT, -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:kbdbacklight", -+ .default_trigger = "htcuniversal-kbdbacklight", -+ }, -+ .hw_num = -1, -+ .gpio_num = ('D'-'A')*16+GPIOD_BL_KEYB_PWR_ON, -+ }, -+}; -+ -+void htcuniversal_leds_release(struct device *dev) -+{ -+ return; -+} -+ -+static -+struct asic3_leds_machinfo htcuniversal_leds_machinfo = { -+ .num_leds = ARRAY_SIZE(htcuniversal_leds), -+ .leds = htcuniversal_leds, -+ .asic3_pdev = &htcuniversal_asic3, -+}; -+ -+static -+struct platform_device htcuniversal_leds_pdev = { -+ .name = "asic3-leds", -+ .dev = { -+ .platform_data = &htcuniversal_leds_machinfo, -+ .release = htcuniversal_leds_release, -+ }, -+}; -+ -+static -+int __init htcuniversal_leds_init(void) -+{ -+ int ret; -+ printk("htcuniversal LEDs Driver\n"); -+// led_trigger_register_shared("htcuniversal-radio", &htcuniversal_radio_trig); -+ -+ ret = asic3_leds_register(); -+ if (ret) goto asic3_leds_failed; -+ -+ ret = platform_device_register(&htcuniversal_leds_pdev); -+ if (ret) goto platform_device_failed; -+ -+ goto success; -+ -+platform_device_failed: -+ asic3_leds_unregister(); -+asic3_leds_failed: -+// led_trigger_unregister_shared(htcuniversal_radio_trig); -+ printk("htcuniversal LEDs Driver failed to init"); -+success: -+ return ret; -+} -+ -+static -+void __exit htcuniversal_leds_exit(void) -+{ -+// led_trigger_unregister_shared(htcuniversal_radio_trig); -+ platform_device_unregister(&htcuniversal_leds_pdev); -+ asic3_leds_unregister(); -+ return; -+} -+ -+module_init(htcuniversal_leds_init); -+module_exit(htcuniversal_leds_exit); -+ -+MODULE_AUTHOR("Anton Vorontsov "); -+MODULE_DESCRIPTION("htcuniversal LEDs driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,61 @@ -+/* -+ * Use consistent with the GNU GPL is permitted, -+ * provided that this copyright notice is -+ * preserved in its entirety in all copies and derived works. -+ * -+ * Copyright (C) 2006 Paul Sokolosvky -+ * Based on code from older versions of htcuniversal_lcd.c -+ * -+ */ -+ -+#include -+#include -+#include /* for pxa-regs.h (__REG) */ -+#include -+#include /* machine_is_htcuniversal */ -+//#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#define HTCUNIVERSAL_MAX_INTENSITY 0xc7 -+ -+static void htcuniversal_set_bl_intensity(int intensity) -+{ -+ PWM_CTRL1 = 1; /* pre-scaler */ -+ PWM_PWDUTY1 = intensity; /* duty cycle */ -+ PWM_PERVAL1 = HTCUNIVERSAL_MAX_INTENSITY+1; /* period */ -+ -+ if (intensity > 0) { -+ pxa_set_cken(CKEN_PWM1, 1); -+ asic3_set_gpio_out_d(&htcuniversal_asic3.dev, -+ (1<"); -+MODULE_DESCRIPTION("Backlight driver for HTC Universal"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,135 @@ -+/* Bluetooth interface driver for TI BRF6150 on HX4700 -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * 2005-04-21 Todd Blumer Created. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "htcuniversal_bt.h" -+ -+static uint use_led=1; -+ -+static void -+htcuniversal_bt_configure( int state ) -+{ -+ int tries; -+ -+ printk( KERN_NOTICE "htcuniversal configure bluetooth: %d\n", state ); -+ switch (state) { -+ -+ case PXA_UART_CFG_PRE_STARTUP: -+ break; -+ -+ case PXA_UART_CFG_POST_STARTUP: -+ /* pre-serial-up hardware configuration */ -+ htcuniversal_egpio_enable(1< CTS=1). Typical 150ms -+ */ -+ tries = 0; -+ do { -+ mdelay(10); -+ } while ((BTMSR & MSR_CTS) == 0 && tries++ < 50); -+ if (use_led) { -+// htcuniversal_set_led(2, 16, 16); -+ } -+ break; -+ -+ case PXA_UART_CFG_PRE_SHUTDOWN: -+ htcuniversal_egpio_disable(1<dev.platform_data; -+ -+ /* configure bluetooth UART */ -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_RXD_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_TXD_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_UART_CTS_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_UART_RTS_MD ); -+ -+ funcs->configure = htcuniversal_bt_configure; -+ -+ /* Make sure the LED is off */ -+// htcuniversal_clear_led(2); -+ -+ return 0; -+} -+ -+static int -+htcuniversal_bt_remove( struct platform_device *dev ) -+{ -+ struct htcuniversal_bt_funcs *funcs = dev->dev.platform_data; -+ -+ funcs->configure = NULL; -+ -+ /* Make sure the LED is off */ -+// htcuniversal_clear_led(2); -+ -+ return 0; -+} -+ -+static struct platform_driver bt_driver = { -+ .driver = { -+ .name = "htcuniversal_bt", -+ }, -+ .probe = htcuniversal_bt_probe, -+ .remove = htcuniversal_bt_remove, -+}; -+ -+module_param(use_led, uint, 0); -+ -+static int __init -+htcuniversal_bt_init( void ) -+{ -+ printk(KERN_NOTICE "htcuniversal Bluetooth Driver\n"); -+ return platform_driver_register( &bt_driver ); -+} -+ -+static void __exit -+htcuniversal_bt_exit( void ) -+{ -+ platform_driver_unregister( &bt_driver ); -+} -+ -+module_init( htcuniversal_bt_init ); -+module_exit( htcuniversal_bt_exit ); -+ -+MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC"); -+MODULE_DESCRIPTION("HTC Universal Bluetooth Support Driver"); -+MODULE_LICENSE("GPL"); -+ -+/* vim600: set noexpandtab sw=8 ts=8 :*/ -+ -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,17 @@ -+/* -+ * Bluetooth support file for calling bluetooth configuration functions -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * 2005-06 Todd Blumer Initial Revision -+ */ -+ -+#ifndef _HTCUNIVERSAL_BT_H -+#define _HTCUNIVERSAL_BT_H -+ -+struct htcuniversal_bt_funcs { -+ void (*configure) ( int state ); -+}; -+ -+ -+#endif -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,87 @@ -+/* -+ * Buttons driver for HTC Universal -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. -+ * -+ * Copyright (C) 2005 Pawel Kolodziejski -+ * Copyright (C) 2003 Joshua Wise -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static struct asic3_keys_button asic3_buttons[] = { -+//{KEY_SCREEN, ASIC3_GPIOA_IRQ_BASE+GPIOA_COVER_ROTATE_N, 1, "screen_cover", EV_SW}, -+//{KEY_SWITCHVIDEOMODE, ASIC3_GPIOB_IRQ_BASE+GPIOB_CLAMSHELL_N, 1, "clamshell_rotate", EV_SW}, -+//{KEY_KBDILLUMTOGGLE, ASIC3_GPIOB_IRQ_BASE+GPIOB_NIGHT_SENSOR, 1, "night_sensor", EV_SW}, -+{SW_LID, ASIC3_GPIOA_IRQ_BASE+GPIOA_COVER_ROTATE_N, 1, "screen_cover", EV_SW}, -+{SW_TABLET_MODE, ASIC3_GPIOB_IRQ_BASE+GPIOB_CLAMSHELL_N, 1, "clamshell_rotate", EV_SW}, -+//{SW_NIGHT_SENSOR, ASIC3_GPIOB_IRQ_BASE+GPIOB_NIGHT_SENSOR, 1, "night_sensor", EV_SW}, -+{KEY_F10, ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_BACKLIGHT_N, 1, "backlight_button"}, -+{KEY_RECORD, ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_RECORD_N, 1, "record_button"}, -+{KEY_CAMERA, ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_CAMERA_N, 1, "camera_button"}, -+{KEY_VOLUMEDOWN, ASIC3_GPIOA_IRQ_BASE+GPIOA_VOL_UP_N, 1, "volume_slider_down"}, -+{KEY_VOLUMEUP, ASIC3_GPIOA_IRQ_BASE+GPIOA_VOL_DOWN_N, 1, "volume_slider_up"}, -+{KEY_KPENTER, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_OK_N, 1, "select"}, -+{KEY_RIGHT, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_RIGHT_N, 1, "right"}, -+{KEY_LEFT, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_LEFT_N, 1, "left"}, -+{KEY_DOWN, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_DOWN_N, 1, "down"}, -+{KEY_UP, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_UP_N, 1, "up"}, -+}; -+ -+static struct asic3_keys_platform_data asic3_keys_data = { -+ .buttons = asic3_buttons, -+ .nbuttons = ARRAY_SIZE(asic3_buttons), -+ .asic3_dev = &htcuniversal_asic3.dev, -+}; -+ -+static struct platform_device htcuniversal_keys_asic3 = { -+ .name = "asic3-keys", -+ .dev = { .platform_data = &asic3_keys_data, } -+}; -+ -+static int __init htcuniversal_buttons_probe(struct platform_device *dev) -+{ -+ platform_device_register(&htcuniversal_keys_asic3); -+ return 0; -+} -+ -+static struct platform_driver htcuniversal_buttons_driver = { -+ .driver = { -+ .name = "htcuniversal_buttons", -+ }, -+ .probe = htcuniversal_buttons_probe, -+}; -+ -+static int __init htcuniversal_buttons_init(void) -+{ -+ if (!machine_is_htcuniversal()) -+ return -ENODEV; -+ -+ return platform_driver_register(&htcuniversal_buttons_driver); -+} -+ -+static void __exit htcuniversal_buttons_exit(void) -+{ -+ platform_driver_unregister(&htcuniversal_buttons_driver); -+} -+ -+module_init(htcuniversal_buttons_init); -+module_exit(htcuniversal_buttons_exit); -+ -+MODULE_AUTHOR ("Joshua Wise, Pawel Kolodziejski, Paul Sokolosvky"); -+MODULE_DESCRIPTION ("Buttons support for HTC Universal"); -+MODULE_LICENSE ("GPL"); -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,226 @@ -+/* Core Hardware driver for Hx4700 (Serial, ASIC3, EGPIOs) -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * 2005-03-29 Todd Blumer Converted basic structure to support hx4700 -+ * 2005-04-30 Todd Blumer Add IRDA code from H2200 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+volatile u_int16_t *egpios; -+u_int16_t egpio_reg; -+ -+static int htc_bootloader = 0; /* Is the stock HTC bootloader installed? */ -+ -+/* -+ * may make sense to put egpios elsewhere, but they're here now -+ * since they share some of the same address space with the TI WLAN -+ * -+ * EGPIO register is write-only -+ */ -+ -+void -+htcuniversal_egpio_enable( u_int16_t bits ) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ egpio_reg |= bits; -+ *egpios = egpio_reg; -+ -+ local_irq_restore(flags); -+} -+EXPORT_SYMBOL_GPL(htcuniversal_egpio_enable); -+ -+void -+htcuniversal_egpio_disable( u_int16_t bits ) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ egpio_reg &= ~bits; -+ *egpios = egpio_reg; -+ -+ local_irq_restore(flags); -+} -+EXPORT_SYMBOL_GPL(htcuniversal_egpio_disable); -+ -+#ifdef CONFIG_PM -+ -+//void htcuniversal_ll_pm_init(void); -+ -+static int htcuniversal_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ /* Turn off external clocks here, because htcuniversal_power and asic3_mmc -+ * scared to do so to not hurt each other. (-5 mA) */ -+ -+ -+ /* 0x20c2 is HTC clock value -+ * CLOCK_CDEX_SOURCE 2 -+ * CLOCK_CDEX_SPI 0 -+ * CLOCK_CDEX_OWM 0 -+ * -+ * CLOCK_CDEX_PWM0 0 -+ * CLOCK_CDEX_PWM1 0 -+ * CLOCK_CDEX_LED0 1 -+ * CLOCK_CDEX_LED1 1 -+ * -+ * CLOCK_CDEX_LED2 0 -+ * CLOCK_CDEX_SD_HOST 0 -+ * CLOCK_CDEX_SD_BUS 0 -+ * CLOCK_CDEX_SMBUS 0 -+ * -+ * CLOCK_CDEX_CONTROL_CX 0 -+ * CLOCK_CDEX_EX0 1 -+ * CLOCK_CDEX_EX1 0 -+ * */ -+ asic3_set_clock_cdex(&htcuniversal_asic3.dev, 0xffff, CLOCK_CDEX_SOURCE1 -+ |CLOCK_CDEX_LED0 -+ |CLOCK_CDEX_LED1 -+ |CLOCK_CDEX_LED2 -+ |CLOCK_CDEX_EX0 -+ |CLOCK_CDEX_EX1); -+ -+ *egpios = 0; /* turn off all egpio power */ -+ -+ /* Wake up enable. */ -+ PWER = PWER_GPIO0 -+ | PWER_GPIO1 /* reset */ -+ | PWER_GPIO9 /* USB */ -+ | PWER_GPIO10 /* AC on USB */ -+ | PWER_GPIO14 /* ASIC3 mux */ -+ | PWER_RTC; -+ /* Wake up on falling edge. */ -+ PFER = PWER_GPIO0 -+ | PWER_GPIO1 -+ | PWER_GPIO9 -+ | PWER_GPIO10 -+ | PWER_GPIO14; -+ -+ /* Wake up on rising edge. */ -+ PRER = PWER_GPIO0 -+ | PWER_GPIO1 -+ | PWER_GPIO9 -+ | PWER_GPIO10; -+ /* 3.6864 MHz oscillator power-down enable */ -+ PCFR = PCFR_OPDE | PCFR_PI2CEN | PCFR_GPROD | PCFR_GPR_EN; -+ -+ PGSR0 = 0x09088004; -+ PGSR1 = 0x00020002; -+ PGSR2 = 0x8001c000; -+ PGSR3 = 0x00106284; -+ -+ PSLR = 0xcc000000; -+ -+#if 0 -+ /* -+ * If we're using bootldr and not the stock HTC bootloader, -+ * we want to wake up periodically to see if the charge is full while -+ * it is suspended. We do this with the OS timer 4 in the pxa270. -+ */ -+ if (!htc_bootloader) { -+ OMCR4 = 0x4b; /* Periodic, self-resetting, 1-second timer */ -+ OSMR4 = 5; /* Wake up bootldr after x seconds so it can -+ figure out what to do with the LEDs. */ -+ OIER |= 0x10; /* Enable interrupt source for Timer 4 */ -+ OSCR4 = 0; /* This starts the timer */ -+ } -+#endif -+ -+ asic3_set_extcf_select(&htcuniversal_asic3.dev, ASIC3_EXTCF_OWM_EN, 0); -+ -+ return 0; -+} -+ -+static int htcuniversal_resume(struct platform_device *dev) -+{ -+ htcuniversal_egpio_enable(0); -+ -+ return 0; -+} -+#else -+# define htcuniversal_suspend NULL -+# define htcuniversal_resume NULL -+#endif -+ -+static int -+htcuniversal_core_probe( struct platform_device *dev ) -+{ -+ -+ printk( KERN_NOTICE "HTC Universal Core Hardware Driver\n" ); -+ -+ egpios = (volatile u_int16_t *)ioremap_nocache(HTCUNIVERSAL_EGPIO_BASE, sizeof *egpios ); -+ if (!egpios) -+ return -ENODEV; -+ else -+ printk( KERN_NOTICE "HTC Universal Core: egpio at phy=0x%8.8x is at virt=0x%p\n", -+ HTCUNIVERSAL_EGPIO_BASE, egpios ); -+ -+ printk("Using stock HTC first stage bootloader\n"); -+ htc_bootloader = 1; -+ -+// htcuniversal_ll_pm_init(); -+ -+ return 0; -+} -+ -+static int -+htcuniversal_core_remove( struct platform_device *dev ) -+{ -+ -+ if (egpios != NULL) -+ iounmap( (void *)egpios ); -+ -+ return 0; -+} -+ -+static struct platform_driver htcuniversal_core_driver = { -+ .driver = { -+ .name = "htcuniversal_core", -+ }, -+ .probe = htcuniversal_core_probe, -+ .remove = htcuniversal_core_remove, -+ .suspend = htcuniversal_suspend, -+ .resume = htcuniversal_resume, -+}; -+ -+static int __init -+htcuniversal_core_init( void ) -+{ -+ return platform_driver_register( &htcuniversal_core_driver ); -+} -+ -+ -+static void __exit -+htcuniversal_core_exit( void ) -+{ -+ platform_driver_unregister( &htcuniversal_core_driver ); -+} -+ -+module_init( htcuniversal_core_init ); -+module_exit( htcuniversal_core_exit ); -+ -+MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC"); -+MODULE_DESCRIPTION("HTC Universal Core Hardware Driver"); -+MODULE_LICENSE("GPL"); -+ -+/* vim600: set noexpandtab sw=8 ts=8 :*/ -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,212 @@ -+/* -+ * Use consistent with the GNU GPL is permitted, -+ * provided that this copyright notice is -+ * preserved in its entirety in all copies and derived works. -+ * -+ * History: -+ * -+ * 2004-03-01 Eddi De Pieri Adapted for htcuniversal using h3900_lcd.c -+ * 2004 Shawn Anderson Lcd hacking on htcuniversal -+ * see h3900_lcd.c for more history. -+ * -+ */ -+ -+#include -+#include /* for pxa-regs.h (__REG) */ -+#include -+#include /* LCCR[0,1,2,3]* */ -+#include /* for pxa-regs.h (Fld, etc) */ -+#include /* pxafb_mach_info, set_pxa_fb_info */ -+#include /* machine_is_htcuniversal */ -+#include /* lcd_device */ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+static int saved_lcdpower=-1; -+ -+static int powerup_lcd(void) -+{ -+ printk( KERN_INFO "htcuniversal powerup_lcd: called\n"); -+ -+ asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<dev, NULL, -+ &htcuniversal_lcd_properties); -+ if (IS_ERR(htcuniversal_lcd_dev)) { -+ printk("htcuniversal_lcd_probe: error registering devices\n"); -+ return -1; -+ } -+ -+ return 0; -+} -+ -+static int htcuniversal_lcd_remove(struct platform_device * dev) -+{ -+ htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 4); -+ lcd_device_unregister(htcuniversal_lcd_dev); -+ -+ return 0; -+} -+ -+static int htcuniversal_lcd_suspend(struct platform_device * dev, pm_message_t state) -+{ -+// printk("htcuniversal_lcd_suspend: called.\n"); -+ htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 4); -+ return 0; -+} -+ -+static int htcuniversal_lcd_resume(struct platform_device * dev) -+{ -+// printk("htcuniversal_lcd_resume: called.\n"); -+ -+ /* */ -+#if 1 -+ LCCR4|=LCCR4_PCDDIV; -+#endif -+ -+ htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 0); -+ return 0; -+} -+ -+static struct platform_driver htcuniversal_lcd_driver = { -+ .driver = { -+ .name = "htcuniversal_lcd", -+ }, -+ .probe = htcuniversal_lcd_probe, -+ .remove = htcuniversal_lcd_remove, -+ .suspend = htcuniversal_lcd_suspend, -+ .resume = htcuniversal_lcd_resume, -+}; -+ -+static int htcuniversal_lcd_init(void) -+{ -+ if (!machine_is_htcuniversal()) -+ return -ENODEV; -+ -+ return platform_driver_register(&htcuniversal_lcd_driver); -+} -+ -+static void htcuniversal_lcd_exit(void) -+{ -+ lcd_device_unregister(htcuniversal_lcd_dev); -+ platform_driver_unregister(&htcuniversal_lcd_driver); -+} -+ -+module_init(htcuniversal_lcd_init); -+module_exit(htcuniversal_lcd_exit); -+ -+MODULE_AUTHOR("xanadux.org"); -+MODULE_DESCRIPTION("Framebuffer driver for HTC Universal"); -+MODULE_LICENSE("GPL"); -+ -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,167 @@ -+ -+/* Phone interface driver for Qualcomm MSM6250 on HTC Universal -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * 2005-04-21 Todd Blumer Created. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "htcuniversal_phone.h" -+ -+static void phone_reset(void) -+{ -+ asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<dev.platform_data; -+ -+ /* configure phone UART */ -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_RXD_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_TXD_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS_MD ); -+ -+ funcs->configure = htcuniversal_phone_configure; -+ -+ return 0; -+} -+ -+static int -+htcuniversal_phone_remove( struct platform_device *dev ) -+{ -+ struct htcuniversal_phone_funcs *funcs = dev->dev.platform_data; -+ -+ funcs->configure = NULL; -+ -+ asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1< -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_PM -+ -+static u32 *addr_a0040000; -+static u32 *addr_a0040004; -+static u32 *addr_a0040008; -+static u32 *addr_a004000c; -+ -+static u32 save_a0040000; -+static u32 save_a0040004; -+static u32 save_a0040008; -+static u32 save_a004000c; -+ -+static void htcuniversal_pxa_ll_pm_suspend(unsigned long resume_addr) -+{ -+ save_a0040000 = *addr_a0040000; -+ save_a0040004 = *addr_a0040004; -+ save_a0040008 = *addr_a0040008; -+ save_a004000c = *addr_a004000c; -+ -+ /* jump to PSPR */ -+ *addr_a0040000 = 0xe3a00101; // mov r0, #0x40000000 -+ *addr_a0040004 = 0xe380060f; // orr r0, r0, #0x0f000000 -+ *addr_a0040008 = 0xe3800008; // orr r0, r0, #8 -+ *addr_a004000c = 0xe590f000; // ldr pc, [r0] -+} -+ -+static void htcuniversal_pxa_ll_pm_resume(void) -+{ -+ *addr_a0040000 = save_a0040000; -+ *addr_a0040004 = save_a0040004; -+ *addr_a0040008 = save_a0040008; -+ *addr_a004000c = save_a004000c; -+} -+ -+static struct pxa_ll_pm_ops htcuniversal_ll_pm_ops = { -+ .suspend = htcuniversal_pxa_ll_pm_suspend, -+ .resume = htcuniversal_pxa_ll_pm_resume, -+}; -+ -+void htcuniversal_ll_pm_init(void) { -+ addr_a0040000 = phys_to_virt(0xa0040000); -+ addr_a0040004 = phys_to_virt(0xa0040004); -+ addr_a0040008 = phys_to_virt(0xa0040008); -+ addr_a004000c = phys_to_virt(0xa004000c); -+ -+ pxa_pm_set_ll_ops(&htcuniversal_ll_pm_ops); -+} -+#endif /* CONFIG_PM */ -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,97 @@ -+/* -+ * pda_power driver for HTC Universal -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or (at -+ * your option) any later version. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+static void charge_on(int flags) -+{ -+ asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1< -+ * May 2003 -+ * -+ * Updates: -+ * -+ * 2004-02-11 Michael Opdenacker Renamed names from samcop to shamcop, -+ * Goal:support HAMCOP and SAMCOP. -+ * 2004-02-14 Michael Opdenacker Temporary fix for device id handling -+ * -+ * 2005-02-18 Aric Blumer Converted basic structure to support hx4700 -+ * -+ * 2005-06-07 Aric Blumer Added tssim device handling so we can -+ * hook in the fbvncserver. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+/* remove me */ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+ -+#include "tsc2046_ts.h" -+ -+enum touchscreen_state { -+ STATE_WAIT_FOR_TOUCH, /* Waiting for a PEN interrupt */ -+ STATE_SAMPLING /* Actively sampling ADC */ -+}; -+ -+struct touchscreen_data { -+ enum touchscreen_state state; -+ struct timer_list timer; -+ int irq; -+ struct input_dev *input; -+ /* */ -+ int port; -+ int clock; -+ int pwrbit_X; -+ int pwrbit_Y; -+ int (*pen_down)(void); -+}; -+ -+static unsigned long poll_sample_time = 10; /* Sample every 10 milliseconds */ -+ -+static struct touchscreen_data *ts_data; -+ -+static int irqblock; -+ -+module_param(poll_sample_time, ulong, 0644); -+MODULE_PARM_DESC(poll_sample_time, "Poll sample time"); -+ -+static inline void -+report_touchpanel(struct touchscreen_data *ts, int pressure, int x, int y) -+{ -+ input_report_abs(ts->input, ABS_PRESSURE, pressure); -+ input_report_abs(ts->input, ABS_X, x); -+ input_report_abs(ts->input, ABS_Y, y); -+ input_sync(ts->input); -+} -+ -+static void start_read(struct touchscreen_data *touch); -+ -+static irqreturn_t -+pen_isr(int irq, void *irq_desc) -+{ -+ struct touchscreen_data *ts = ts_data; -+ -+ if(irq == ts->irq /* && !irqblock */) { -+ irqblock = 1; -+ -+ /* -+ * Disable the pen interrupt. It's reenabled when the user lifts the -+ * pen. -+ */ -+ disable_irq(ts->irq); -+ -+ if (ts->state == STATE_WAIT_FOR_TOUCH) { -+ ts->state = STATE_SAMPLING; -+ start_read(ts); -+ } else { -+ /* Shouldn't happen */ -+ printk(KERN_ERR "Unexpected ts interrupt\n"); -+ } -+ -+ } -+ return IRQ_HANDLED; -+} -+ -+static void -+ssp_init(int port, int clock) -+{ -+ -+ pxa_set_cken(clock, 0); -+ -+ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_CLK_MD); -+ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_FRM_MD); -+ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DO_MD); -+ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DI_MD); -+ -+ SET_HTCUNIVERSAL_GPIO(SPI_FRM,1); -+ -+ /* *** Set up the SPI Registers *** */ -+ SSCR0_P(port) = -+ SSCR0_EDSS /* Extended Data Size Select */ -+ | SSCR0_SerClkDiv(7) /* Serial Clock Rate */ -+ /* Synchronous Serial Enable (Disable for now) */ -+ | SSCR0_Motorola /* Motorola SPI Interface */ -+ | SSCR0_DataSize(8) /* Data Size Select (24-bit) */ -+ ; -+ SSCR1_P(port) = 0; -+ SSPSP_P(port) = 0; -+ -+ /* Clear the Status */ -+ SSSR_P(port) = SSSR_P(port) & 0x00fcfffc; -+ -+ /* Now enable it */ -+ SSCR0_P(port) = -+ SSCR0_EDSS /* Extended Data Size Select */ -+ | SSCR0_SerClkDiv(7) /* Serial Clock Rate */ -+ | SSCR0_SSE /* Synchronous Serial Enable */ -+ | SSCR0_Motorola /* Motorola SPI Interface */ -+ | SSCR0_DataSize(8) /* Data Size Select (24-bit) */ -+ ; -+ -+ pxa_set_cken(clock, 1); -+} -+ -+static void -+start_read(struct touchscreen_data *touch) -+{ -+ unsigned long inc = (poll_sample_time * HZ) / 1000; -+ int i; -+ -+ /* Write here to the serial port. We request X and Y only for now. -+ * Then we have to wait for poll_sample_time before we read out the serial -+ * port. Then, when we read it out, we check to see if the pen is still -+ * down. If so, then we issue another request here. -+ */ -+#define TS_SAMPLES 7 -+ -+ /* -+ * We do four samples for each, and throw out the highest and lowest, then -+ * average the other two. -+ */ -+ -+ for(i = 0; i < TS_SAMPLES; i++) { -+ while(!(SSSR_P(touch->port) & SSSR_TNF)) -+ ; -+ /* It's not full. Write the command for X */ -+ SSDR_P(touch->port) = (TSC2046_SAMPLE_X|(touch->pwrbit_X))<<16; -+ } -+ -+ for(i = 0; i < TS_SAMPLES; i++) { -+ while(!(SSSR_P(touch->port) & SSSR_TNF)) -+ ; -+ /* It's not full. Write the command for Y */ -+ SSDR_P(touch->port) = (TSC2046_SAMPLE_Y|(touch->pwrbit_Y))<<16; -+ } -+ -+ /* -+ * Enable the timer. We should get an interrupt, but we want keep a timer -+ * to ensure that we can detect missing data -+ */ -+ mod_timer(&touch->timer, jiffies + inc); -+} -+ -+static void -+ts_timer_callback(unsigned long data) -+{ -+ struct touchscreen_data *ts = (struct touchscreen_data *)data; -+ int x, a[TS_SAMPLES], y; -+ static int oldx, oldy; -+ int ssrval; -+ -+ /* -+ * Check here to see if there is anything in the SPI FIFO. If so, -+ * return it if there has been a change. If not, then we have a -+ * timeout. Generate an erro somehow. -+ */ -+ ssrval = SSSR_P(ts->port); -+ -+ if(ssrval & SSSR_RNE) { /* Look at Rx Not Empty bit */ -+ int number_of_entries_in_fifo; -+ -+ /* The FIFO is not emtpy. Good! Now make sure there are at least two -+ * entries. (Should be two exactly.) */ -+ -+ number_of_entries_in_fifo = ((ssrval >> 12) & 0xf) + 1; -+ -+ if(number_of_entries_in_fifo < TS_SAMPLES * 2) { -+ /* Not ready yet. Come back later. */ -+ unsigned long inc = (poll_sample_time * HZ) / 1000; -+ mod_timer(&ts->timer, jiffies + inc); -+ return; -+ } -+ -+ if(number_of_entries_in_fifo == TS_SAMPLES * 2) { -+ int i, j; -+ -+ for(i = 0; i < TS_SAMPLES; i++) { -+ a[i] = SSDR_P(ts->port); -+ } -+ /* Sort them (bubble) */ -+ for(j = TS_SAMPLES - 1; j > 0; j--) { -+ for(i = 0; i < j; i++) { -+ if(a[i] > a[i + 1]) { -+ int tmp; -+ tmp = a[i+1]; -+ a[i+1] = a[i]; -+ a[i] = tmp; -+ } -+ } -+ } -+ -+ /* Take the average of the middle two */ -+ /* x = (a[TS_SAMPLES/2 - 1] + a[TS_SAMPLES/2] + a[TS_SAMPLES/2+1] + a[TS_SAMPLES/2+2]) >> 2; */ -+ x = a[TS_SAMPLES/2]; -+ -+ for(i = 0; i < TS_SAMPLES; i++) { -+ a[i] = SSDR_P(ts->port); -+ } -+ /* Sort them (bubble) */ -+ for(j = TS_SAMPLES - 1; j > 0; j--) { -+ for(i = 0; i < j; i++) { -+ if(a[i] > a[i + 1]) { -+ int tmp; -+ tmp = a[i+1]; -+ a[i+1] = a[i]; -+ a[i] = tmp; -+ } -+ } -+ } -+ -+ -+ /* Take the average of the middle two */ -+ /* y = (a[TS_SAMPLES/2 - 1] + a[TS_SAMPLES/2] + a[TS_SAMPLES/2+1] + a[TS_SAMPLES/2+2]) >> 2; */ -+ y = a[TS_SAMPLES/2]; -+ } else { -+ /* We have an error! Too many entries. */ -+ printk(KERN_ERR "TS: Expected %d entries. Got %d\n", TS_SAMPLES*2, number_of_entries_in_fifo); -+ /* Try to clear the FIFO */ -+ while(number_of_entries_in_fifo--) { -+ (void)SSDR_P(ts->port); -+ } -+ -+ if (ts->pen_down()) -+ start_read(ts); -+ -+ return; -+ } -+ } else { -+ /* Not ready yet. Come back later. */ -+ unsigned long inc = (poll_sample_time * HZ) / 1000; -+ mod_timer(&ts->timer, jiffies + inc); -+ return; -+ } -+ -+ /* -+ * Now we check to see if the pen is still down. If it is, then call -+ * start_read(). -+ */ -+ if (ts->pen_down()) -+ { -+ /* Still down */ -+ if(oldx != x || oldy != y) { -+ oldx = x; -+ oldy = y; -+ report_touchpanel(ts, 1, x, y); -+ } -+ start_read(ts); -+ } else { -+ /* Up */ -+ report_touchpanel(ts, 0, 0, 0); -+ irqblock = 0; -+ ts->state = STATE_WAIT_FOR_TOUCH; -+ /* Re-enable pen down interrupt */ -+ enable_irq(ts->irq); -+ } -+} -+ -+static int pen_down(void) -+{ -+ return ( asic3_get_gpio_status_a( &htcuniversal_asic3.dev ) & (1<dev.platform_data; -+ -+ printk("htcuniversal: ts_probe\n"); -+ -+ ts = ts_data = kmalloc (sizeof (*ts), GFP_KERNEL); -+ if (ts == NULL) { -+ printk( KERN_NOTICE "htcuniversal_ts: unable to allocate memory\n" ); -+ return -ENOMEM; -+ } -+ memset (ts, 0, sizeof (*ts)); -+ -+ ts->input = input_allocate_device(); -+ if (ts->input == NULL) { -+ printk( KERN_NOTICE "htcuniversal_ts: unable to allocation touchscreen input\n" ); -+ kfree(ts); -+ return -ENOMEM; -+ } -+ ts->input->evbit[0] = BIT(EV_ABS); -+ ts->input->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); -+ ts->input->absmin[ABS_X] = 0; -+ ts->input->absmax[ABS_X] = 32767; -+ ts->input->absmin[ABS_Y] = 0; -+ ts->input->absmax[ABS_Y] = 32767; -+ ts->input->absmin[ABS_PRESSURE] = 0; -+ ts->input->absmax[ABS_PRESSURE] = 1; -+ -+ ts->input->name = "htcuniversal_ts"; -+ ts->input->phys = "touchscreen/htcuniversal_ts"; -+ ts->input->private = ts; -+ -+ input_register_device(ts->input); -+ -+ ts->timer.function = ts_timer_callback; -+ ts->timer.data = (unsigned long)ts; -+ ts->state = STATE_WAIT_FOR_TOUCH; -+ init_timer (&ts->timer); -+ -+ platform_set_drvdata(dev, ts); -+ -+ ts->port=-1; -+ -+ if (mach) { -+ ts->port = mach->port; -+ ts->clock = mach->clock; -+ ts->pwrbit_X = mach->pwrbit_X; -+ ts->pwrbit_Y = mach->pwrbit_Y; -+ -+ /* static irq */ -+ if (mach->irq) -+ ts->irq = mach->irq; -+ -+ if (mach->pen_down) -+ ts->pen_down=mach->pen_down; -+ } -+ -+ if (ts->port == -1) -+ { -+ printk("tsc2046: your device is not supported by this driver\n"); -+ return -ENODEV; -+ } -+ -+ /* *** Initialize the SSP interface *** */ -+ ssp_init(ts->port, ts->clock); -+ -+ while(!(SSSR_P(ts->port) & SSSR_TNF)) -+ ; -+ SSDR_P(ts->port) = (TSC2046_SAMPLE_X|(ts->pwrbit_X))<<16; -+ -+ for(retval = 0; retval < 100; retval++) { -+ if(SSSR_P(ts->port) & SSSR_RNE) { -+ while(SSSR_P(ts->port) & SSSR_RNE) { -+ (void)SSDR_P(ts->port); -+ } -+ break; -+ } -+ mdelay(1); -+ } -+ -+ if (machine_is_htcuniversal() ) -+ { -+ ts->irq = asic3_irq_base( &htcuniversal_asic3.dev ) + ASIC3_GPIOA_IRQ_BASE + GPIOA_TOUCHSCREEN_N; -+ ts->pen_down=pen_down; -+ } -+ -+ retval = request_irq(ts->irq, pen_isr, IRQF_DISABLED, "tsc2046_ts", ts); -+ if(retval) { -+ printk("Unable to get interrupt\n"); -+ input_unregister_device (ts->input); -+ return -ENODEV; -+ } -+ set_irq_type(ts->irq, IRQ_TYPE_EDGE_FALLING); -+ -+ return 0; -+} -+ -+static int -+ts_remove (struct platform_device *dev) -+{ -+ struct touchscreen_data *ts = platform_get_drvdata(dev); -+ -+ input_unregister_device (ts->input); -+ del_timer_sync (&ts->timer); -+ free_irq (ts->irq, ts); -+ pxa_set_cken(ts->clock, 0); -+ -+ kfree(ts); -+ return 0; -+} -+ -+static int -+ts_suspend (struct platform_device *dev, pm_message_t state) -+{ -+ struct touchscreen_data *ts = platform_get_drvdata(dev); -+ -+ disable_irq(ts->irq); -+ -+ printk("htcuniversal_ts2_suspend: called.\n"); -+ return 0; -+} -+ -+static int -+ts_resume (struct platform_device *dev) -+{ -+ struct touchscreen_data *ts = platform_get_drvdata(dev); -+ -+ ts->state = STATE_WAIT_FOR_TOUCH; -+ ssp_init(ts->port, ts->clock); -+ enable_irq(ts->irq); -+ -+ printk("htcuniversal_ts2_resume: called.\n"); -+ return 0; -+} -+ -+static struct platform_driver ts_driver = { -+ .probe = ts_probe, -+ .remove = ts_remove, -+ .suspend = ts_suspend, -+ .resume = ts_resume, -+ .driver = { -+ .name = "htcuniversal_ts", -+ }, -+}; -+ -+ -+static int -+ts_module_init (void) -+{ -+ printk(KERN_NOTICE "HTC Universal Touch Screen Driver\n"); -+ -+ return platform_driver_register(&ts_driver); -+} -+ -+static void -+ts_module_cleanup (void) -+{ -+ platform_driver_unregister (&ts_driver); -+} -+ -+module_init(ts_module_init); -+module_exit(ts_module_cleanup); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Aric Blumer, SDG Systems, LLC"); -+MODULE_DESCRIPTION("HTC Universal Touch Screen Driver"); -Index: linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,71 @@ -+ -+/* -+ * -+ * htcuniversal_udc.c: -+ * htcuniversal specific code for the pxa27x usb device controller. -+ * -+ * Use consistent with the GNU GPL is permitted. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static void htcuniversal_udc_command(int cmd) -+{ -+ switch (cmd) { -+ case PXA2XX_UDC_CMD_DISCONNECT: -+ asic3_set_gpio_out_b(&htcuniversal_asic3.dev, -+ 1< -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include "leds.h" -+ -+#include -+#include -+#include -+#include -+ -+#ifdef DEBUG -+#define dbg(msg, ...) printk(msg, __VA_ARGS__) -+#else -+#define dbg(msg, ...) -+#endif -+ -+static -+void asic3_leds_set(struct led_classdev *led_cdev, enum led_brightness b) -+{ -+ struct asic3_led *led = container_of(led_cdev, struct asic3_led, -+ led_cdev); -+ struct asic3_leds_machinfo *machinfo = led->machinfo; -+ struct device *asic3_dev = &machinfo->asic3_pdev->dev; -+ -+ dbg("%s:%s %d(%d)-%s %d\n", __FILE__, __FUNCTION__, led->hw_num, -+ led->gpio_num, led->led_cdev.name, b); -+ -+ if (led->hw_num == -1) { -+ asic3_gpio_set_value(asic3_dev, led->gpio_num, b); -+ return; -+ } -+ -+ if (b == LED_OFF) { -+ asic3_set_led(asic3_dev, led->hw_num, 0, 16, 6); -+ asic3_set_gpio_out_c(asic3_dev, led->hw_num, 0); -+ } -+ else { -+ asic3_set_gpio_out_c(asic3_dev, led->hw_num, led->hw_num); -+ #ifdef CONFIG_LEDS_TRIGGER_HWTIMER -+ if (led_cdev->trigger && led_cdev->trigger->is_led_supported && -+ (led_cdev->trigger->is_led_supported(led_cdev) & -+ LED_SUPPORTS_HWTIMER)) { -+ struct hwtimer_data *td = led_cdev->trigger_data; -+ if (!td) return; -+ asic3_set_led(asic3_dev, led->hw_num, td->delay_on/8, -+ (td->delay_on + td->delay_off)/8, 6); -+ } -+ else -+ #endif -+ asic3_set_led(asic3_dev, led->hw_num, 16, 16, 6); -+ } -+ -+ return; -+} -+ -+static -+int asic3_leds_probe(struct platform_device *pdev) -+{ -+ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; -+ struct asic3_led *leds = machinfo->leds; -+ int ret, i = 0; -+ -+ dbg("%s:%s\n", __FILE__, __FUNCTION__); -+ -+ // Turn on clocks early, for the case if trigger would enable -+ // led immediately after led_classdev_register(). -+ asic3_set_clock_cdex(&machinfo->asic3_pdev->dev, -+ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2, -+ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2); -+ -+ for (i = 0; i < machinfo->num_leds; i++) { -+ leds[i].machinfo = machinfo; -+ leds[i].led_cdev.brightness_set = asic3_leds_set; -+ ret = led_classdev_register(&pdev->dev, &leds[i].led_cdev); -+ if (ret) { -+ printk(KERN_ERR "Error: can't register %s led\n", -+ leds[i].led_cdev.name); -+ goto out_err; -+ } -+ } -+ -+ return 0; -+ -+out_err: -+ while (--i >= 0) led_classdev_unregister(&leds[i].led_cdev); -+ -+ asic3_set_clock_cdex(&machinfo->asic3_pdev->dev, -+ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2, -+ 0 | 0 | 0); -+ -+ return ret; -+} -+ -+static -+int asic3_leds_remove(struct platform_device *pdev) -+{ -+ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; -+ struct asic3_led *leds = machinfo->leds; -+ int i = 0; -+ -+ dbg("%s:%s\n", __FILE__, __FUNCTION__); -+ -+ for (i = 0; i < machinfo->num_leds; i++) -+ led_classdev_unregister(&leds[i].led_cdev); -+ -+ asic3_set_clock_cdex(&machinfo->asic3_pdev->dev, -+ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2, -+ 0 | 0 | 0); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+ -+static -+int asic3_leds_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; -+ struct asic3_led *leds = machinfo->leds; -+ int i = 0; -+ -+ dbg("%s:%s\n", __FILE__, __FUNCTION__); -+ -+ for (i = 0; i < machinfo->num_leds; i++) -+ led_classdev_suspend(&leds[i].led_cdev); -+ -+ return 0; -+} -+ -+static -+int asic3_leds_resume(struct platform_device *pdev) -+{ -+ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; -+ struct asic3_led *leds = machinfo->leds; -+ int i = 0; -+ -+ dbg("%s:%s\n", __FILE__, __FUNCTION__); -+ -+ for (i = 0; i < machinfo->num_leds; i++) -+ led_classdev_resume(&leds[i].led_cdev); -+ -+ return 0; -+} -+ -+#endif -+ -+static -+struct platform_driver asic3_leds_driver = { -+ .probe = asic3_leds_probe, -+ .remove = asic3_leds_remove, -+#ifdef CONFIG_PM -+ .suspend = asic3_leds_suspend, -+ .resume = asic3_leds_resume, -+#endif -+ .driver = { -+ .name = "asic3-leds", -+ }, -+}; -+ -+int asic3_leds_register(void) -+{ -+ dbg("%s:%s\n", __FILE__, __FUNCTION__); -+ return platform_driver_register(&asic3_leds_driver); -+} -+ -+void asic3_leds_unregister(void) -+{ -+ platform_driver_unregister(&asic3_leds_driver); -+ return; -+} -+ -+EXPORT_SYMBOL_GPL(asic3_leds_register); -+EXPORT_SYMBOL_GPL(asic3_leds_unregister); -+ -+MODULE_AUTHOR("Anton Vorontsov "); -+MODULE_DESCRIPTION("HTC ASIC3 LEDs driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.22/drivers/mfd/Kconfig -=================================================================== ---- linux-2.6.22.orig/drivers/mfd/Kconfig 2007-09-11 12:53:30.000000000 +0200 -+++ linux-2.6.22/drivers/mfd/Kconfig 2007-09-11 12:53:37.000000000 +0200 -@@ -15,6 +15,16 @@ - interface. The device may be connected by PCI or local bus with - varying functions enabled. - -+config HTC_ASIC3 -+ tristate "HTC ASIC3 (iPAQ h1900/h3900/h4000/hx4700/rx3000) support" -+ -+config HTC_ASIC3_DS1WM -+ bool "Support HTC ASIC3 builtin DS1WM block" -+ help -+ Choose Y here if you want to include support for ASIC3's builtin -+ W1 controller. Some devices do not use it, and yet other have -+ separate DS1WM controller. For them, choose N. -+ - endmenu - - menu "Multimedia Capabilities Port drivers" -Index: linux-2.6.22/drivers/mfd/Makefile -=================================================================== ---- linux-2.6.22.orig/drivers/mfd/Makefile 2007-09-11 12:53:30.000000000 +0200 -+++ linux-2.6.22/drivers/mfd/Makefile 2007-09-11 12:53:37.000000000 +0200 -@@ -2,6 +2,8 @@ - # Makefile for multifunction miscellaneous devices - # - -+obj-$(CONFIG_HTC_ASIC3) += asic3_base.o soc-core.o -+ - obj-$(CONFIG_MFD_SM501) += sm501.o - - obj-$(CONFIG_MCP) += mcp-core.o -Index: linux-2.6.22/drivers/mfd/asic3_base.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/mfd/asic3_base.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,1208 @@ -+/* -+ * Driver interface to HTC "ASIC3" -+ * -+ * Copyright 2001 Compaq Computer Corporation. -+ * Copyright 2004-2005 Phil Blundell -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, -+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS -+ * FITNESS FOR ANY PARTICULAR PURPOSE. -+ * -+ * Author: Andrew Christian -+ * -+ * October 2001 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include "soc-core.h" -+ -+ -+struct asic3_data { -+ void *mapping; -+ unsigned int bus_shift; -+ int irq_base; -+ int irq_nr; -+ -+ u16 irq_bothedge[4]; -+ struct device *dev; -+ -+ struct platform_device *mmc_dev; -+}; -+ -+static DEFINE_SPINLOCK(asic3_gpio_lock); -+ -+static int asic3_remove(struct platform_device *dev); -+ -+static inline unsigned long asic3_address(struct device *dev, -+ unsigned int reg) -+{ -+ struct asic3_data *adata; -+ -+ adata = (struct asic3_data *)dev->driver_data; -+ -+ return (unsigned long)adata->mapping + (reg >> (2 - adata->bus_shift)); -+} -+ -+void asic3_write_register(struct device *dev, unsigned int reg, u32 value) -+{ -+ __raw_writew(value, asic3_address(dev, reg)); -+} -+EXPORT_SYMBOL(asic3_write_register); -+ -+u32 asic3_read_register(struct device *dev, unsigned int reg) -+{ -+ return __raw_readw(asic3_address(dev, reg)); -+} -+EXPORT_SYMBOL(asic3_read_register); -+ -+static inline void __asic3_write_register(struct asic3_data *asic, -+ unsigned int reg, u32 value) -+{ -+ __raw_writew(value, (unsigned long)asic->mapping -+ + (reg >> (2 - asic->bus_shift))); -+} -+ -+static inline u32 __asic3_read_register(struct asic3_data *asic, -+ unsigned int reg) -+{ -+ return __raw_readw((unsigned long)asic->mapping -+ + (reg >> (2 - asic->bus_shift))); -+} -+ -+#define ASIC3_GPIO_FN(get_fn_name, set_fn_name, REG) \ -+u32 get_fn_name(struct device *dev) \ -+{ \ -+ return asic3_read_register(dev, REG); \ -+} \ -+EXPORT_SYMBOL(get_fn_name); \ -+ \ -+void set_fn_name(struct device *dev, u32 bits, u32 val) \ -+{ \ -+ unsigned long flags; \ -+ \ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); \ -+ val |= (asic3_read_register(dev, REG) & ~bits); \ -+ asic3_write_register(dev, REG, val); \ -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); \ -+} \ -+EXPORT_SYMBOL(set_fn_name); -+ -+#define ASIC3_GPIO_REGISTER(ACTION, action, fn, FN) \ -+ ASIC3_GPIO_FN(asic3_get_gpio_ ## action ## _ ## fn , \ -+ asic3_set_gpio_ ## action ## _ ## fn , \ -+ _IPAQ_ASIC3_GPIO_ ## FN ## _Base \ -+ + _IPAQ_ASIC3_GPIO_ ## ACTION ) -+ -+#define ASIC3_GPIO_FUNCTIONS(fn, FN) \ -+ ASIC3_GPIO_REGISTER(Direction, dir, fn, FN) \ -+ ASIC3_GPIO_REGISTER(Out, out, fn, FN) \ -+ ASIC3_GPIO_REGISTER(SleepMask, sleepmask, fn, FN) \ -+ ASIC3_GPIO_REGISTER(SleepOut, sleepout, fn, FN) \ -+ ASIC3_GPIO_REGISTER(BattFaultOut, battfaultout, fn, FN) \ -+ ASIC3_GPIO_REGISTER(AltFunction, alt_fn, fn, FN) \ -+ ASIC3_GPIO_REGISTER(SleepConf, sleepconf, fn, FN) \ -+ ASIC3_GPIO_REGISTER(Status, status, fn, FN) -+ -+#if 0 -+ ASIC3_GPIO_REGISTER(Mask, mask, fn, FN) -+ ASIC3_GPIO_REGISTER(TriggerType, trigtype, fn, FN) -+ ASIC3_GPIO_REGISTER(EdgeTrigger, rising, fn, FN) -+ ASIC3_GPIO_REGISTER(LevelTrigger, triglevel, fn, FN) -+ ASIC3_GPIO_REGISTER(IntStatus, intstatus, fn, FN) -+#endif -+ -+ASIC3_GPIO_FUNCTIONS(a, A) -+ASIC3_GPIO_FUNCTIONS(b, B) -+ASIC3_GPIO_FUNCTIONS(c, C) -+ASIC3_GPIO_FUNCTIONS(d, D) -+ -+int asic3_gpio_get_value(struct device *dev, unsigned gpio) -+{ -+ u32 mask = ASIC3_GPIO_bit(gpio); -+ printk("%s(%d)\n", __FUNCTION__, gpio); -+ switch (gpio >> 4) { -+ case _IPAQ_ASIC3_GPIO_BANK_A: -+ return asic3_get_gpio_status_a(dev) & mask; -+ case _IPAQ_ASIC3_GPIO_BANK_B: -+ return asic3_get_gpio_status_b(dev) & mask; -+ case _IPAQ_ASIC3_GPIO_BANK_C: -+ return asic3_get_gpio_status_c(dev) & mask; -+ case _IPAQ_ASIC3_GPIO_BANK_D: -+ return asic3_get_gpio_status_d(dev) & mask; -+ } -+ -+ printk(KERN_ERR "%s: invalid GPIO value 0x%x", __FUNCTION__, gpio); -+ return 0; -+} -+EXPORT_SYMBOL(asic3_gpio_get_value); -+ -+void asic3_gpio_set_value(struct device *dev, unsigned gpio, int val) -+{ -+ u32 mask = ASIC3_GPIO_bit(gpio); -+ u32 bitval = 0; -+ if (val) bitval = mask; -+ printk("%s(%d, %d)\n", __FUNCTION__, gpio, val); -+ -+ switch (gpio >> 4) { -+ case _IPAQ_ASIC3_GPIO_BANK_A: -+ asic3_set_gpio_out_a(dev, mask, bitval); -+ return; -+ case _IPAQ_ASIC3_GPIO_BANK_B: -+ asic3_set_gpio_out_b(dev, mask, bitval); -+ return; -+ case _IPAQ_ASIC3_GPIO_BANK_C: -+ asic3_set_gpio_out_c(dev, mask, bitval); -+ return; -+ case _IPAQ_ASIC3_GPIO_BANK_D: -+ asic3_set_gpio_out_d(dev, mask, bitval); -+ return; -+ } -+ -+ printk(KERN_ERR "%s: invalid GPIO value 0x%x", __FUNCTION__, gpio); -+} -+EXPORT_SYMBOL(asic3_gpio_set_value); -+ -+int asic3_irq_base(struct device *dev) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ -+ return asic->irq_base; -+} -+EXPORT_SYMBOL(asic3_irq_base); -+ -+static int asic3_gpio_to_irq(struct device *dev, unsigned gpio) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ printk("%s(%d)\n", __FUNCTION__, gpio); -+ -+ return asic->irq_base + gpio; -+} -+ -+void asic3_set_led(struct device *dev, int led_num, int duty_time, -+ int cycle_time, int timebase) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned int led_base; -+ -+ /* it's a macro thing: see #define _IPAQ_ASIC_LED_0_Base for why you -+ * can't substitute led_num in the macros below... -+ */ -+ -+ switch (led_num) { -+ case 0: -+ led_base = _IPAQ_ASIC3_LED_0_Base; -+ break; -+ case 1: -+ led_base = _IPAQ_ASIC3_LED_1_Base; -+ break; -+ case 2: -+ led_base = _IPAQ_ASIC3_LED_2_Base; -+ break; -+ default: -+ printk(KERN_ERR "%s: invalid led number %d", __FUNCTION__, -+ led_num); -+ return; -+ } -+ -+ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_TimeBase, -+ timebase | LED_EN); -+ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_PeriodTime, -+ cycle_time); -+ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_DutyTime, -+ 0); -+ udelay(20); /* asic voodoo - possibly need a whole duty cycle? */ -+ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_DutyTime, -+ duty_time); -+} -+EXPORT_SYMBOL(asic3_set_led); -+ -+void asic3_set_clock_sel(struct device *dev, u32 bits, u32 val) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned long flags; -+ u32 v; -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL)); -+ v = (v & ~bits) | val; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), v); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+EXPORT_SYMBOL(asic3_set_clock_sel); -+ -+void asic3_set_clock_cdex(struct device *dev, u32 bits, u32 val) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned long flags; -+ u32 v; -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX)); -+ v = (v & ~bits) | val; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), v); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+EXPORT_SYMBOL(asic3_set_clock_cdex); -+ -+static void asic3_clock_cdex_enable(struct clk *clk) -+{ -+ struct asic3_data *asic = (struct asic3_data *)clk->parent->ctrlbit; -+ unsigned long flags, val; -+ -+ local_irq_save(flags); -+ -+ val = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX)); -+ val |= clk->ctrlbit; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), val); -+ -+ local_irq_restore(flags); -+} -+ -+static void asic3_clock_cdex_disable(struct clk *clk) -+{ -+ struct asic3_data *asic = (struct asic3_data *)clk->parent->ctrlbit; -+ unsigned long flags, val; -+ -+ local_irq_save(flags); -+ -+ val = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX)); -+ val &= ~clk->ctrlbit; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), val); -+ -+ local_irq_restore(flags); -+} -+ -+/* base clocks */ -+ -+static struct clk clk_g = { -+ .name = "gclk", -+ .rate = 0, -+ .parent = NULL, -+}; -+ -+/* clock definitions */ -+ -+static struct clk asic3_clocks[] = { -+ { -+ .name = "spi", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_SPI, -+ }, -+#ifdef CONFIG_HTC_ASIC3_DS1WM -+ { -+ .name = "ds1wm", -+ .id = -1, -+ .rate = 5000000, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_OWM, -+ }, -+#endif -+ { -+ .name = "pwm0", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_PWM0, -+ }, -+ { -+ .name = "pwm1", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_PWM1, -+ }, -+ { -+ .name = "led0", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_LED0, -+ }, -+ { -+ .name = "led1", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_LED1, -+ }, -+ { -+ .name = "led2", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_LED2, -+ }, -+ { -+ .name = "smbus", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_SMBUS, -+ }, -+ { -+ .name = "ex0", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_EX0, -+ }, -+ { -+ .name = "ex1", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_EX1, -+ }, -+}; -+ -+void asic3_set_extcf_select(struct device *dev, u32 bits, u32 val) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned long flags; -+ u32 v; -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Select)); -+ v = (v & ~bits) | val; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Select), v); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+EXPORT_SYMBOL(asic3_set_extcf_select); -+ -+void asic3_set_extcf_reset(struct device *dev, u32 bits, u32 val) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned long flags; -+ u32 v; -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Reset)); -+ v = (v & ~bits) | val; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Reset), v); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+EXPORT_SYMBOL(asic3_set_extcf_reset); -+ -+void asic3_set_sdhwctrl(struct device *dev, u32 bits, u32 val) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned long flags; -+ u32 v; -+ -+ spin_lock_irqsave (&asic3_gpio_lock, flags); -+ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(SDHWCTRL, SDConf)); -+ v = (v & ~bits) | val; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(SDHWCTRL, SDConf), v); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+EXPORT_SYMBOL(asic3_set_sdhwctrl); -+ -+ -+#define MAX_ASIC_ISR_LOOPS 20 -+#define _IPAQ_ASIC3_GPIO_Base_INCR \ -+ (_IPAQ_ASIC3_GPIO_B_Base - _IPAQ_ASIC3_GPIO_A_Base) -+ -+static inline void asic3_irq_flip_edge(struct asic3_data *asic, -+ u32 base, int bit) -+{ -+ u16 edge = __asic3_read_register(asic, -+ base + _IPAQ_ASIC3_GPIO_EdgeTrigger); -+ edge ^= bit; -+ __asic3_write_register(asic, -+ base + _IPAQ_ASIC3_GPIO_EdgeTrigger, edge); -+} -+ -+static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc) -+{ -+ int iter; -+ struct asic3_data *asic; -+ -+ /* Acknowledge the parrent (i.e. CPU's) IRQ */ -+ desc->chip->ack(irq); -+ -+ asic = desc->handler_data; -+ -+ /* printk( KERN_NOTICE "asic3_irq_demux: irq=%d\n", irq ); */ -+ for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) { -+ u32 status; -+ int bank; -+ -+ status = __asic3_read_register(asic, -+ IPAQ_ASIC3_OFFSET(INTR, PIntStat)); -+ /* Check all ten register bits */ -+ if ((status & 0x3ff) == 0) -+ break; -+ -+ /* Handle GPIO IRQs */ -+ for (bank = 0; bank < 4; bank++) { -+ if (status & (1 << bank)) { -+ unsigned long base, i, istat; -+ -+ base = _IPAQ_ASIC3_GPIO_A_Base -+ + bank * _IPAQ_ASIC3_GPIO_Base_INCR; -+ istat = __asic3_read_register(asic, -+ base + _IPAQ_ASIC3_GPIO_IntStatus); -+ /* IntStatus is write 0 to clear */ -+ /* XXX could miss interrupts! */ -+ __asic3_write_register(asic, -+ base + _IPAQ_ASIC3_GPIO_IntStatus, 0); -+ -+ for (i = 0; i < 16; i++) { -+ int bit = (1 << i); -+ unsigned int irqnr; -+ if (!(istat & bit)) -+ continue; -+ -+ irqnr = asic->irq_base -+ + (16 * bank) + i; -+ desc = irq_desc + irqnr; -+ desc->handle_irq(irqnr, desc); -+ if (asic->irq_bothedge[bank] & bit) { -+ asic3_irq_flip_edge(asic, base, -+ bit); -+ } -+ } -+ } -+ } -+ -+ /* Handle remaining IRQs in the status register */ -+ { -+ int i; -+ -+ for (i = ASIC3_LED0_IRQ; i <= ASIC3_OWM_IRQ; i++) { -+ /* They start at bit 4 and go up */ -+ if (status & (1 << (i - ASIC3_LED0_IRQ + 4))) { -+ desc = irq_desc + asic->irq_base + i; -+ desc->handle_irq(asic->irq_base + i, -+ desc); -+ } -+ } -+ } -+ -+ } -+ -+ if (iter >= MAX_ASIC_ISR_LOOPS) -+ printk(KERN_ERR "%s: interrupt processing overrun\n", -+ __FUNCTION__); -+} -+ -+static inline int asic3_irq_to_bank(struct asic3_data *asic, int irq) -+{ -+ int n; -+ -+ n = (irq - asic->irq_base) >> 4; -+ -+ return (n * (_IPAQ_ASIC3_GPIO_B_Base - _IPAQ_ASIC3_GPIO_A_Base)); -+} -+ -+static inline int asic3_irq_to_index(struct asic3_data *asic, int irq) -+{ -+ return (irq - asic->irq_base) & 15; -+} -+ -+static void asic3_mask_gpio_irq(unsigned int irq) -+{ -+ struct asic3_data *asic = get_irq_chip_data(irq); -+ u32 val, bank, index; -+ unsigned long flags; -+ -+ bank = asic3_irq_to_bank(asic, irq); -+ index = asic3_irq_to_index(asic, irq); -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ val = __asic3_read_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask); -+ val |= 1 << index; -+ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask, val); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+ -+static void asic3_mask_irq(unsigned int irq) -+{ -+ struct asic3_data *asic = get_irq_chip_data(irq); -+ int regval; -+ -+ if (irq < ASIC3_NR_GPIO_IRQS) { -+ printk(KERN_ERR "asic3_base: gpio mask attempt, irq %d\n", -+ irq); -+ return; -+ } -+ -+ regval = __asic3_read_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask); -+ -+ switch (irq - asic->irq_base) { -+ case ASIC3_LED0_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK0); -+ break; -+ case ASIC3_LED1_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK1); -+ break; -+ case ASIC3_LED2_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK2); -+ break; -+ case ASIC3_SPI_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK3); -+ break; -+ case ASIC3_SMBUS_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK4); -+ break; -+ case ASIC3_OWM_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK5); -+ break; -+ default: -+ printk(KERN_ERR "asic3_base: bad non-gpio irq %d\n", irq); -+ break; -+ } -+} -+ -+static void asic3_unmask_gpio_irq(unsigned int irq) -+{ -+ struct asic3_data *asic = get_irq_chip_data(irq); -+ u32 val, bank, index; -+ unsigned long flags; -+ -+ bank = asic3_irq_to_bank(asic, irq); -+ index = asic3_irq_to_index(asic, irq); -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ val = __asic3_read_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask); -+ val &= ~(1 << index); -+ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask, val); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+ -+static void asic3_unmask_irq(unsigned int irq) -+{ -+ struct asic3_data *asic = get_irq_chip_data(irq); -+ int regval; -+ -+ if (irq < ASIC3_NR_GPIO_IRQS) { -+ printk(KERN_ERR "asic3_base: gpio unmask attempt, irq %d\n", -+ irq); -+ return; -+ } -+ -+ regval = __asic3_read_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask); -+ -+ switch (irq - asic->irq_base) { -+ case ASIC3_LED0_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK0); -+ break; -+ case ASIC3_LED1_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK1); -+ break; -+ case ASIC3_LED2_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK2); -+ break; -+ case ASIC3_SPI_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK3); -+ break; -+ case ASIC3_SMBUS_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK4); -+ break; -+ case ASIC3_OWM_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK5); -+ break; -+ default: -+ printk(KERN_ERR "asic3_base: bad non-gpio irq %d\n", irq); -+ break; -+ } -+} -+ -+static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) -+{ -+ struct asic3_data *asic = get_irq_chip_data(irq); -+ u32 bank, index; -+ unsigned long flags; -+ u16 trigger, level, edge, bit; -+ -+ bank = asic3_irq_to_bank(asic, irq); -+ index = asic3_irq_to_index(asic, irq); -+ bit = 1<irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit; -+ -+ if (type == IRQT_RISING) { -+ trigger |= bit; -+ edge |= bit; -+ } else if (type == IRQT_FALLING) { -+ trigger |= bit; -+ edge &= ~bit; -+ } else if (type == IRQT_BOTHEDGE) { -+ trigger |= bit; -+ if (asic3_gpio_get_value(asic->dev, irq - asic->irq_base)) -+ edge &= ~bit; -+ else -+ edge |= bit; -+ asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit; -+ } else if (type == IRQT_LOW) { -+ trigger &= ~bit; -+ level &= ~bit; -+ } else if (type == IRQT_HIGH) { -+ trigger &= ~bit; -+ level |= bit; -+ } else { -+ /* -+ * if type == IRQT_NOEDGE, we should mask interrupts, but -+ * be careful to not unmask them if mask was also called. -+ * Probably need internal state for mask. -+ */ -+ printk(KERN_NOTICE "asic3: irq type not changed.\n"); -+ } -+ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_LevelTrigger, -+ level); -+ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_EdgeTrigger, -+ edge); -+ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_TriggerType, -+ trigger); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+ return 0; -+} -+ -+static struct irq_chip asic3_gpio_irq_chip = { -+ .name = "ASIC3-GPIO", -+ .ack = asic3_mask_gpio_irq, -+ .mask = asic3_mask_gpio_irq, -+ .unmask = asic3_unmask_gpio_irq, -+ .set_type = asic3_gpio_irq_type, -+}; -+ -+static struct irq_chip asic3_irq_chip = { -+ .name = "ASIC3", -+ .ack = asic3_mask_irq, -+ .mask = asic3_mask_irq, -+ .unmask = asic3_unmask_irq, -+}; -+ -+static void asic3_release(struct device *dev) -+{ -+ struct platform_device *sdev = to_platform_device(dev); -+ -+ kfree(sdev->resource); -+ kfree(sdev); -+} -+ -+int asic3_register_mmc(struct device *dev) -+{ -+ struct platform_device *sdev = kzalloc(sizeof(*sdev), GFP_KERNEL); -+ struct tmio_mmc_hwconfig *mmc_config = kmalloc(sizeof(*mmc_config), -+ GFP_KERNEL); -+ struct platform_device *pdev = to_platform_device(dev); -+ struct asic3_data *asic = dev->driver_data; -+ struct asic3_platform_data *asic3_pdata = dev->platform_data; -+ struct resource *res; -+ int rc; -+ -+ if (sdev == NULL || mmc_config == NULL) -+ return -ENOMEM; -+ -+ if (asic3_pdata->tmio_mmc_hwconfig) { -+ memcpy(mmc_config, asic3_pdata->tmio_mmc_hwconfig, -+ sizeof(*mmc_config)); -+ } else { -+ memset(mmc_config, 0, sizeof(*mmc_config)); -+ } -+ mmc_config->address_shift = asic->bus_shift; -+ -+ sdev->id = -1; -+ sdev->name = "asic3_mmc"; -+ sdev->dev.parent = dev; -+ sdev->num_resources = 2; -+ sdev->dev.platform_data = mmc_config; -+ sdev->dev.release = asic3_release; -+ -+ res = kzalloc(sdev->num_resources * sizeof(struct resource), -+ GFP_KERNEL); -+ if (res == NULL) { -+ kfree(sdev); -+ kfree(mmc_config); -+ return -ENOMEM; -+ } -+ sdev->resource = res; -+ -+ res[0].start = pdev->resource[2].start; -+ res[0].end = pdev->resource[2].end; -+ res[0].flags = IORESOURCE_MEM; -+ res[1].start = res[1].end = pdev->resource[3].start; -+ res[1].flags = IORESOURCE_IRQ; -+ -+ rc = platform_device_register(sdev); -+ if (rc) { -+ printk(KERN_ERR "asic3_base: " -+ "Could not register asic3_mmc device\n"); -+ kfree(res); -+ kfree(sdev); -+ return rc; -+ } -+ -+ asic->mmc_dev = sdev; -+ -+ return 0; -+} -+EXPORT_SYMBOL(asic3_register_mmc); -+ -+int asic3_unregister_mmc(struct device *dev) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ platform_device_unregister(asic->mmc_dev); -+ asic->mmc_dev = 0; -+ -+ return 0; -+} -+EXPORT_SYMBOL(asic3_unregister_mmc); -+ -+#ifdef CONFIG_HTC_ASIC3_DS1WM -+/* -+ * DS1WM subdevice -+ */ -+ -+static void asic3_ds1wm_enable(struct platform_device *ds1wm_dev) -+{ -+ struct device *dev = ds1wm_dev->dev.parent; -+ -+ /* Turn on external clocks and the OWM clock */ -+ asic3_set_clock_cdex(dev, -+ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM, -+ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM); -+ -+ mdelay(1); -+ -+ asic3_set_extcf_reset(dev, ASIC3_EXTCF_OWM_RESET, -+ ASIC3_EXTCF_OWM_RESET); -+ mdelay(1); -+ asic3_set_extcf_reset(dev, ASIC3_EXTCF_OWM_RESET, 0); -+ mdelay(1); -+ -+ /* Clear OWM_SMB, set OWM_EN */ -+ asic3_set_extcf_select(dev, -+ ASIC3_EXTCF_OWM_SMB | ASIC3_EXTCF_OWM_EN, -+ 0 | ASIC3_EXTCF_OWM_EN); -+ -+ mdelay(1); -+} -+ -+static void asic3_ds1wm_disable(struct platform_device *ds1wm_dev) -+{ -+ struct device *dev = ds1wm_dev->dev.parent; -+ -+ asic3_set_extcf_select(dev, -+ ASIC3_EXTCF_OWM_SMB | ASIC3_EXTCF_OWM_EN, -+ 0 | 0); -+ -+ asic3_set_clock_cdex(dev, -+ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM, -+ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | 0); -+} -+ -+ -+static struct resource asic3_ds1wm_resources[] = { -+ { -+ .start = _IPAQ_ASIC3_OWM_Base, -+ .end = _IPAQ_ASIC3_OWM_Base + 0x14 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = ASIC3_OWM_IRQ, -+ .end = ASIC3_OWM_IRQ, -+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | -+ IORESOURCE_IRQ_SOC_SUBDEVICE, -+ }, -+}; -+ -+static struct ds1wm_platform_data ds1wm_pd = { -+ .enable = asic3_ds1wm_enable, -+ .disable = asic3_ds1wm_disable, -+}; -+#endif -+ -+static struct soc_device_data asic3_blocks[] = { -+#ifdef CONFIG_HTC_ASIC3_DS1WM -+ { -+ .name = "ds1wm", -+ .res = asic3_ds1wm_resources, -+ .num_resources = ARRAY_SIZE(asic3_ds1wm_resources), -+ .hwconfig = &ds1wm_pd, -+ }, -+#endif -+}; -+ -+static int asic3_probe(struct platform_device *pdev) -+{ -+ struct asic3_platform_data *pdata = pdev->dev.platform_data; -+ struct asic3_data *asic; -+ struct device *dev = &pdev->dev; -+ unsigned long clksel; -+ int i, rc; -+ -+ asic = kzalloc(sizeof(struct asic3_data), GFP_KERNEL); -+ if (!asic) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, asic); -+ asic->dev = &pdev->dev; -+ -+ asic->mapping = ioremap(pdev->resource[0].start, IPAQ_ASIC3_MAP_SIZE); -+ if (!asic->mapping) { -+ printk(KERN_ERR "asic3: couldn't ioremap ASIC3\n"); -+ kfree (asic); -+ return -ENOMEM; -+ } -+ -+ if (pdata && pdata->bus_shift) -+ asic->bus_shift = pdata->bus_shift; -+ else -+ asic->bus_shift = 2; -+ -+ /* XXX: should get correct SD clock values from pdata struct */ -+ clksel = 0; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), clksel); -+ -+ /* Register ASIC3's clocks. */ -+ clk_g.ctrlbit = (int)asic; -+ -+ if (clk_register(&clk_g) < 0) -+ printk(KERN_ERR "asic3: failed to register ASIC3 gclk\n"); -+ -+ for (i = 0; i < ARRAY_SIZE(asic3_clocks); i++) { -+ rc = clk_register(&asic3_clocks[i]); -+ if (rc < 0) -+ printk(KERN_ERR "asic3: " -+ "failed to register clock %s (%d)\n", -+ asic3_clocks[i].name, rc); -+ } -+ -+ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(A, Mask), 0xffff); -+ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(B, Mask), 0xffff); -+ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(C, Mask), 0xffff); -+ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(D, Mask), 0xffff); -+ -+ asic3_set_gpio_sleepmask_a(dev, 0xffff, 0xffff); -+ asic3_set_gpio_sleepmask_b(dev, 0xffff, 0xffff); -+ asic3_set_gpio_sleepmask_c(dev, 0xffff, 0xffff); -+ asic3_set_gpio_sleepmask_d(dev, 0xffff, 0xffff); -+ -+ if (pdata) { -+ asic3_set_gpio_out_a(dev, 0xffff, pdata->gpio_a.init); -+ asic3_set_gpio_out_b(dev, 0xffff, pdata->gpio_b.init); -+ asic3_set_gpio_out_c(dev, 0xffff, pdata->gpio_c.init); -+ asic3_set_gpio_out_d(dev, 0xffff, pdata->gpio_d.init); -+ -+ asic3_set_gpio_dir_a(dev, 0xffff, pdata->gpio_a.dir); -+ asic3_set_gpio_dir_b(dev, 0xffff, pdata->gpio_b.dir); -+ asic3_set_gpio_dir_c(dev, 0xffff, pdata->gpio_c.dir); -+ asic3_set_gpio_dir_d(dev, 0xffff, pdata->gpio_d.dir); -+ -+ asic3_set_gpio_sleepmask_a(dev, 0xffff, -+ pdata->gpio_a.sleep_mask); -+ asic3_set_gpio_sleepmask_b(dev, 0xffff, -+ pdata->gpio_b.sleep_mask); -+ asic3_set_gpio_sleepmask_c(dev, 0xffff, -+ pdata->gpio_c.sleep_mask); -+ asic3_set_gpio_sleepmask_d(dev, 0xffff, -+ pdata->gpio_d.sleep_mask); -+ -+ asic3_set_gpio_sleepout_a(dev, 0xffff, -+ pdata->gpio_a.sleep_out); -+ asic3_set_gpio_sleepout_b(dev, 0xffff, -+ pdata->gpio_b.sleep_out); -+ asic3_set_gpio_sleepout_c(dev, 0xffff, -+ pdata->gpio_c.sleep_out); -+ asic3_set_gpio_sleepout_d(dev, 0xffff, -+ pdata->gpio_d.sleep_out); -+ -+ asic3_set_gpio_battfaultout_a(dev, 0xffff, -+ pdata->gpio_a.batt_fault_out); -+ asic3_set_gpio_battfaultout_b(dev, 0xffff, -+ pdata->gpio_b.batt_fault_out); -+ asic3_set_gpio_battfaultout_c(dev, 0xffff, -+ pdata->gpio_c.batt_fault_out); -+ asic3_set_gpio_battfaultout_d(dev, 0xffff, -+ pdata->gpio_d.batt_fault_out); -+ -+ asic3_set_gpio_sleepconf_a(dev, 0xffff, -+ pdata->gpio_a.sleep_conf); -+ asic3_set_gpio_sleepconf_b(dev, 0xffff, -+ pdata->gpio_b.sleep_conf); -+ asic3_set_gpio_sleepconf_c(dev, 0xffff, -+ pdata->gpio_c.sleep_conf); -+ asic3_set_gpio_sleepconf_d(dev, 0xffff, -+ pdata->gpio_d.sleep_conf); -+ -+ asic3_set_gpio_alt_fn_a(dev, 0xffff, -+ pdata->gpio_a.alt_function); -+ asic3_set_gpio_alt_fn_b(dev, 0xffff, -+ pdata->gpio_b.alt_function); -+ asic3_set_gpio_alt_fn_c(dev, 0xffff, -+ pdata->gpio_c.alt_function); -+ asic3_set_gpio_alt_fn_d(dev, 0xffff, -+ pdata->gpio_d.alt_function); -+ } -+ -+ asic->irq_nr = -1; -+ asic->irq_base = -1; -+ -+ if (pdev->num_resources > 1) -+ asic->irq_nr = pdev->resource[1].start; -+ -+ if (asic->irq_nr != -1) { -+ unsigned int i; -+ -+ if (!pdata->irq_base) { -+ printk(KERN_ERR "asic3: IRQ base not specified\n"); -+ asic3_remove(pdev); -+ return -EINVAL; -+ } -+ -+ asic->irq_base = pdata->irq_base; -+ -+ /* turn on clock to IRQ controller */ -+ clksel |= CLOCK_SEL_CX; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), -+ clksel); -+ -+ printk(KERN_INFO "asic3: using irq %d-%d on irq %d\n", -+ asic->irq_base, asic->irq_base + ASIC3_NR_IRQS - 1, -+ asic->irq_nr); -+ -+ for (i = 0 ; i < ASIC3_NR_IRQS ; i++) { -+ int irq = i + asic->irq_base; -+ if (i < ASIC3_NR_GPIO_IRQS) { -+ set_irq_chip(irq, &asic3_gpio_irq_chip); -+ set_irq_chip_data(irq, asic); -+ set_irq_handler(irq, handle_level_irq); -+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); -+ } else { -+ /* The remaining IRQs are not GPIO */ -+ set_irq_chip(irq, &asic3_irq_chip); -+ set_irq_chip_data(irq, asic); -+ set_irq_handler(irq, handle_level_irq); -+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); -+ } -+ } -+ -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), -+ ASIC3_INTMASK_GINTMASK); -+ -+ set_irq_chained_handler(asic->irq_nr, asic3_irq_demux); -+ set_irq_type(asic->irq_nr, IRQT_RISING); -+ set_irq_data(asic->irq_nr, asic); -+ } -+ -+#ifdef CONFIG_HTC_ASIC3_DS1WM -+ ds1wm_pd.bus_shift = asic->bus_shift; -+#endif -+ -+ pdata->gpiodev_ops.get = asic3_gpio_get_value; -+ pdata->gpiodev_ops.set = asic3_gpio_set_value; -+ pdata->gpiodev_ops.to_irq = asic3_gpio_to_irq; -+ -+ soc_add_devices(pdev, asic3_blocks, ARRAY_SIZE(asic3_blocks), -+ &pdev->resource[0], -+ asic->bus_shift - ASIC3_DEFAULT_ADDR_SHIFT, -+ asic->irq_base); -+ -+ if (pdev->num_resources > 2) { -+ int rc; -+ rc = asic3_register_mmc(dev); -+ if (rc) { -+ asic3_remove(pdev); -+ return rc; -+ } -+ } -+ -+ if (pdata && pdata->num_child_platform_devs != 0) -+ platform_add_devices(pdata->child_platform_devs, -+ pdata->num_child_platform_devs); -+ -+ return 0; -+} -+ -+static int asic3_remove(struct platform_device *pdev) -+{ -+ struct asic3_platform_data *pdata = pdev->dev.platform_data; -+ struct asic3_data *asic = platform_get_drvdata(pdev); -+ int i; -+ -+ if (pdata && pdata->num_child_platform_devs != 0) { -+ for (i = 0; i < pdata->num_child_platform_devs; i++) { -+ platform_device_unregister( -+ pdata->child_platform_devs[i]); -+ } -+ } -+ -+ if (asic->irq_nr != -1) { -+ unsigned int i; -+ -+ for (i = 0 ; i < ASIC3_NR_IRQS ; i++) { -+ int irq = i + asic->irq_base; -+ set_irq_flags(irq, 0); -+ set_irq_handler (irq, NULL); -+ set_irq_chip (irq, NULL); -+ set_irq_chip_data(irq, NULL); -+ } -+ -+ set_irq_chained_handler(asic->irq_nr, NULL); -+ } -+ -+ if (asic->mmc_dev) -+ asic3_unregister_mmc(&pdev->dev); -+ -+ for (i = 0; i < ARRAY_SIZE(asic3_clocks); i++) -+ clk_unregister(&asic3_clocks[i]); -+ clk_unregister(&clk_g); -+ -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), 0); -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), 0); -+ -+ iounmap(asic->mapping); -+ -+ kfree(asic); -+ -+ return 0; -+} -+ -+static void asic3_shutdown(struct platform_device *pdev) -+{ -+} -+ -+#define ASIC3_SUSPEND_CDEX_MASK \ -+ (CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2) -+static unsigned short suspend_cdex; -+ -+static int asic3_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct asic3_data *asic = platform_get_drvdata(pdev); -+ suspend_cdex = __asic3_read_register(asic, -+ _IPAQ_ASIC3_CLOCK_Base + _IPAQ_ASIC3_CLOCK_CDEX); -+ /* The LEDs are still active during suspend */ -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_CLOCK_Base + _IPAQ_ASIC3_CLOCK_CDEX, -+ suspend_cdex & ASIC3_SUSPEND_CDEX_MASK); -+ return 0; -+} -+ -+static int asic3_resume(struct platform_device *pdev) -+{ -+ struct asic3_data *asic = platform_get_drvdata(pdev); -+ unsigned short intmask; -+ -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), -+ suspend_cdex); -+ -+ if (asic->irq_nr != -1) { -+ /* Toggle the interrupt mask to try to get ASIC3 to show -+ * the CPU an interrupt edge. For more details see the -+ * kernel-discuss thread around 13 June 2005 with the -+ * subject "asic3 suspend / resume". */ -+ intmask = __asic3_read_register(asic, -+ IPAQ_ASIC3_OFFSET(INTR, IntMask)); -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), -+ intmask & ~ASIC3_INTMASK_GINTMASK); -+ mdelay(1); -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), -+ intmask | ASIC3_INTMASK_GINTMASK); -+ } -+ -+ return 0; -+} -+ -+static struct platform_driver asic3_device_driver = { -+ .driver = { -+ .name = "asic3", -+ }, -+ .probe = asic3_probe, -+ .remove = asic3_remove, -+ .suspend = asic3_suspend, -+ .resume = asic3_resume, -+ .shutdown = asic3_shutdown, -+}; -+ -+static int __init asic3_base_init(void) -+{ -+ int retval = 0; -+ retval = platform_driver_register(&asic3_device_driver); -+ return retval; -+} -+ -+static void __exit asic3_base_exit(void) -+{ -+ platform_driver_unregister(&asic3_device_driver); -+} -+ -+#ifdef MODULE -+module_init(asic3_base_init); -+#else /* start early for dependencies */ -+subsys_initcall(asic3_base_init); -+#endif -+module_exit(asic3_base_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Phil Blundell "); -+MODULE_DESCRIPTION("Core driver for HTC ASIC3"); -+MODULE_SUPPORTED_DEVICE("asic3"); -Index: linux-2.6.22/drivers/mfd/soc-core.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/mfd/soc-core.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,106 @@ -+/* -+ * drivers/soc/soc-core.c -+ * -+ * core SoC support -+ * Copyright (c) 2006 Ian Molton -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This file contains functionality used by many SoC type devices. -+ * -+ * Created: 2006-11-28 -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include "soc-core.h" -+ -+void soc_free_devices(struct platform_device *devices, int nr_devs) -+{ -+ struct platform_device *dev = devices; -+ int i; -+ -+ for (i = 0; i < nr_devs; i++) { -+ struct resource *res = dev->resource; -+ platform_device_unregister(dev++); -+ kfree(res); -+ } -+ kfree(devices); -+} -+EXPORT_SYMBOL_GPL(soc_free_devices); -+ -+#define SIGNED_SHIFT(val, shift) ((shift) >= 0 ? ((val) << (shift)) : ((val) >> -(shift))) -+ -+struct platform_device *soc_add_devices(struct platform_device *dev, -+ struct soc_device_data *soc, int nr_devs, -+ struct resource *mem, -+ int relative_addr_shift, int irq_base) -+{ -+ struct platform_device *devices; -+ int i, r, base; -+ -+ devices = kzalloc(nr_devs * sizeof(struct platform_device), GFP_KERNEL); -+ if (!devices) -+ return NULL; -+ -+ for (i = 0; i < nr_devs; i++) { -+ struct platform_device *sdev = &devices[i]; -+ struct soc_device_data *blk = &soc[i]; -+ struct resource *res; -+ -+ sdev->id = -1; -+ sdev->name = blk->name; -+ -+ sdev->dev.parent = &dev->dev; -+ sdev->dev.platform_data = (void *)blk->hwconfig; -+ sdev->num_resources = blk->num_resources; -+ -+ /* Allocate space for the subdevice resources */ -+ res = kzalloc (blk->num_resources * sizeof (struct resource), GFP_KERNEL); -+ if (!res) -+ goto fail; -+ -+ for (r = 0 ; r < blk->num_resources ; r++) { -+ res[r].name = blk->res[r].name; // Fixme - should copy -+ -+ /* Find out base to use */ -+ base = 0; -+ if (blk->res[r].flags & IORESOURCE_MEM) { -+ base = mem->start; -+ } else if ((blk->res[r].flags & IORESOURCE_IRQ) && -+ (blk->res[r].flags & IORESOURCE_IRQ_SOC_SUBDEVICE)) { -+ base = irq_base; -+ } -+ -+ /* Adjust resource */ -+ if (blk->res[r].flags & IORESOURCE_MEM) { -+ res[r].parent = mem; -+ res[r].start = base + SIGNED_SHIFT(blk->res[r].start, relative_addr_shift); -+ res[r].end = base + SIGNED_SHIFT(blk->res[r].end, relative_addr_shift); -+ } else { -+ res[r].start = base + blk->res[r].start; -+ res[r].end = base + blk->res[r].end; -+ } -+ res[r].flags = blk->res[r].flags; -+ } -+ -+ sdev->resource = res; -+ if (platform_device_register(sdev)) { -+ kfree(res); -+ goto fail; -+ } -+ -+ printk(KERN_INFO "SoC: registering %s\n", blk->name); -+ } -+ return devices; -+ -+fail: -+ soc_free_devices(devices, i + 1); -+ return NULL; -+} -+EXPORT_SYMBOL_GPL(soc_add_devices); -Index: linux-2.6.22/drivers/mfd/soc-core.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/mfd/soc-core.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,30 @@ -+/* -+ * drivers/soc/soc-core.h -+ * -+ * core SoC support -+ * Copyright (c) 2006 Ian Molton -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This file contains prototypes for the functions in soc-core.c -+ * -+ * Created: 2006-11-28 -+ * -+ */ -+ -+struct soc_device_data { -+ char *name; -+ struct resource *res; -+ int num_resources; -+ void *hwconfig; /* platform_data to pass to the subdevice */ -+}; -+ -+struct platform_device *soc_add_devices(struct platform_device *dev, -+ struct soc_device_data *soc, int n_devs, -+ struct resource *mem, -+ int relative_addr_shift, int irq_base); -+ -+void soc_free_devices(struct platform_device *devices, int nr_devs); -+ -Index: linux-2.6.22/include/asm-arm/arch-pxa/clock.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/clock.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,27 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/clock.h -+ * -+ * Copyright (C) 2006 Erik Hovland -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+struct clk { -+ struct list_head node; -+ struct module *owner; -+ struct clk *parent; -+ const char *name; -+ int id; -+ unsigned int enabled; -+ unsigned long rate; -+ unsigned long ctrlbit; -+ -+ void (*enable)(struct clk *); -+ void (*disable)(struct clk *); -+}; -+ -+ -+extern int clk_register(struct clk *clk); -+extern void clk_unregister(struct clk *clk); -Index: linux-2.6.22/include/asm-arm/arch-pxa/htcuniversal-asic.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/htcuniversal-asic.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,213 @@ -+/* -+ * include/asm/arm/arch-pxa/htcuniversal-asic.h -+ * -+ * Authors: Giuseppe Zompatori -+ * -+ * based on previews work, see below: -+ * -+ * include/asm/arm/arch-pxa/hx4700-asic.h -+ * Copyright (c) 2004 SDG Systems, LLC -+ * -+ */ -+ -+#ifndef _HTCUNIVERSAL_ASIC_H_ -+#define _HTCUNIVERSAL_ASIC_H_ -+ -+#include -+ -+/* ASIC3 */ -+ -+#define HTCUNIVERSAL_ASIC3_GPIO_PHYS PXA_CS4_PHYS -+#define HTCUNIVERSAL_ASIC3_MMC_PHYS PXA_CS3_PHYS -+ -+/* TODO: some information is missing here */ -+ -+/* ASIC3 GPIO A bank */ -+ -+#define GPIOA_I2C_EN 0 /* Output */ -+#define GPIOA_SPK_PWR1_ON 1 /* Output */ -+#define GPIOA_AUDIO_PWR_ON 2 /* Output */ -+#define GPIOA_EARPHONE_PWR_ON 3 /* Output */ -+ -+#define GPIOA_UNKNOWN4 4 /* Output */ -+#define GPIOA_BUTTON_BACKLIGHT_N 5 /* Input */ -+#define GPIOA_SPK_PWR2_ON 6 /* Output */ -+#define GPIOA_BUTTON_RECORD_N 7 /* Input */ -+ -+#define GPIOA_BUTTON_CAMERA_N 8 /* Input */ -+#define GPIOA_UNKNOWN9 9 /* Output */ -+#define GPIOA_FLASHLIGHT 10 /* Output */ -+#define GPIOA_COVER_ROTATE_N 11 /* Input */ -+ -+#define GPIOA_TOUCHSCREEN_N 12 /* Input */ -+#define GPIOA_VOL_UP_N 13 /* Input */ -+#define GPIOA_VOL_DOWN_N 14 /* Input */ -+#define GPIOA_LCD_PWR5_ON 15 /* Output */ -+ -+/* ASIC3 GPIO B bank */ -+ -+#define GPIOB_BB_READY 0 /* Input */ -+#define GPIOB_CODEC_PDN 1 /* Output */ -+#define GPIOB_UNKNOWN2 2 /* Input */ -+#define GPIOB_BB_UNKNOWN3 3 /* Input */ -+ -+#define GPIOB_BT_IRQ 4 /* Input */ -+#define GPIOB_CLAMSHELL_N 5 /* Input */ -+#define GPIOB_LCD_PWR3_ON 6 /* Output */ -+#define GPIOB_BB_ALERT 7 /* Input */ -+ -+#define GPIOB_BB_RESET2 8 /* Output */ -+#define GPIOB_EARPHONE_N 9 /* Input */ -+#define GPIOB_MICRECORD_N 10 /* Input */ -+#define GPIOB_NIGHT_SENSOR 11 /* Input */ -+ -+#define GPIOB_UMTS_DCD 12 /* Input */ -+#define GPIOB_UNKNOWN13 13 /* Input */ -+#define GPIOB_CHARGE_EN 14 /* Output */ -+#define GPIOB_USB_PUEN 15 /* Output */ -+ -+/* ASIC3 GPIO C bank */ -+ -+#define GPIOC_LED_BTWIFI 0 /* Output */ -+#define GPIOC_LED_RED 1 /* Output */ -+#define GPIOC_LED_GREEN 2 /* Output */ -+#define GPIOC_BOARDID3 3 /* Input */ -+ -+#define GPIOC_WIFI_IRQ_N 4 /* Input */ -+#define GPIOC_WIFI_RESET 5 /* Output */ -+#define GPIOC_WIFI_PWR1_ON 6 /* Output */ -+#define GPIOC_BT_RESET 7 /* Output */ -+ -+#define GPIOC_UNKNOWN8 8 /* Output */ -+#define GPIOC_LCD_PWR1_ON 9 /* Output */ -+#define GPIOC_LCD_PWR2_ON 10 /* Output */ -+#define GPIOC_BOARDID2 11 /* Input */ -+ -+#define GPIOC_BOARDID1 12 /* Input */ -+#define GPIOC_BOARDID0 13 /* Input */ -+#define GPIOC_BT_PWR_ON 14 /* Output */ -+#define GPIOC_CHARGE_ON 15 /* Output */ -+ -+/* ASIC3 GPIO D bank */ -+ -+#define GPIOD_KEY_OK_N 0 /* Input */ -+#define GPIOD_KEY_RIGHT_N 1 /* Input */ -+#define GPIOD_KEY_LEFT_N 2 /* Input */ -+#define GPIOD_KEY_DOWN_N 3 /* Input */ -+ -+#define GPIOD_KEY_UP_N 4 /* Input */ -+#define GPIOD_SDIO_DET 5 /* Input */ -+#define GPIOD_WIFI_PWR2_ON 6 /* Output */ -+#define GPIOD_HW_REBOOT 7 /* Output */ -+ -+#define GPIOD_BB_RESET1 8 /* Output */ -+#define GPIOD_UNKNOWN9 9 /* Output */ -+#define GPIOD_VIBRA_PWR_ON 10 /* Output */ -+#define GPIOD_WIFI_PWR3_ON 11 /* Output */ -+ -+#define GPIOD_FL_PWR_ON 12 /* Output */ -+#define GPIOD_LCD_PWR4_ON 13 /* Output */ -+#define GPIOD_BL_KEYP_PWR_ON 14 /* Output */ -+#define GPIOD_BL_KEYB_PWR_ON 15 /* Output */ -+ -+extern struct platform_device htcuniversal_asic3; -+ -+/* ASIC3 GPIO A bank */ -+ -+#define GPIO_I2C_EN 0*16+GPIOA_I2C_EN -+#define GPIO_SPK_PWR1_ON 0*16+GPIOA_SPK_PWR1_ON -+#define GPIO_AUDIO_PWR_ON 0*16+GPIOA_AUDIO_PWR_ON -+#define GPIO_EARPHONE_PWR_ON 0*16+GPIOA_EARPHONE_PWR_ON -+ -+#define GPIO_UNKNOWNA4 0*16+GPIOA_UNKNOWN4 -+#define GPIO_BUTTON_BACKLIGHT_N 0*16+GPIOA_BUTTON_BACKLIGHT_N -+#define GPIO_SPK_PWR2_ON 0*16+GPIOA_SPK_PWR2_ON -+#define GPIO_BUTTON_RECORD_N 0*16+GPIOA_BUTTON_RECORD_N -+ -+#define GPIO_BUTTON_CAMERA_N 0*16+GPIOA_BUTTON_CAMERA_N -+#define GPIO_UNKNOWNA9 0*16+GPIOA_UNKNOWN9 -+#define GPIO_FLASHLIGHT 0*16+GPIOA_FLASHLIGHT -+#define GPIO_COVER_ROTATE_N 0*16+GPIOA_COVER_ROTATE_N -+ -+#define GPIO_TOUCHSCREEN_N 0*16+GPIOA_TOUCHSCREEN_N -+#define GPIO_VOL_UP_N 0*16+GPIOA_VOL_UP_N -+#define GPIO_VOL_DOWN_N 0*16+GPIOA_VOL_DOWN_N -+#define GPIO_LCD_PWR5_ON 0*16+GPIOA_LCD_PWR5_ON -+ -+/* ASIC3 GPIO B bank */ -+ -+#define GPIO_BB_READY 1*16+GPIOB_BB_READY -+#define GPIO_CODEC_PDN 1*16+GPIOB_CODEC_PDN -+#define GPIO_UNKNOWNB2 1*16+GPIOB_UNKNOWN2 -+#define GPIO_BB_UNKNOWN3 1*16+GPIOB_BB_UNKNOWN3 -+ -+#define GPIO_BT_IRQ 1*16+GPIOB_BT_IRQ -+#define GPIO_CLAMSHELL_N 1*16+GPIOB_CLAMSHELL_N -+#define GPIO_LCD_PWR3_ON 1*16+GPIOB_LCD_PWR3_ON -+#define GPIO_BB_ALERT 1*16+GPIOB_BB_ALERT -+ -+#define GPIO_BB_RESET2 1*16+GPIOB_BB_RESET2 -+#define GPIO_EARPHONE_N 1*16+GPIOB_EARPHONE_N -+#define GPIO_MICRECORD_N 1*16+GPIOB_MICRECORD_N -+#define GPIO_NIGHT_SENSOR 1*16+GPIOB_NIGHT_SENSOR -+ -+#define GPIO_UMTS_DCD 1*16+GPIOB_UMTS_DCD -+#define GPIO_UNKNOWNB13 1*16+GPIOB_UNKNOWN13 -+#define GPIO_CHARGE_EN 1*16+GPIOB_CHARGE_EN -+#define GPIO_USB_PUEN 1*16+GPIOB_USB_PUEN -+ -+/* ASIC3 GPIO C bank */ -+ -+#define GPIO_LED_BTWIFI 2*16+GPIOC_LED_BTWIFI -+#define GPIO_LED_RED 2*16+GPIOC_LED_RED -+#define GPIO_LED_GREEN 2*16+GPIOC_LED_GREEN -+#define GPIO_BOARDID3 2*16+GPIOC_BOARDID3 -+ -+#define GPIO_WIFI_IRQ_N 2*16+GPIOC_WIFI_IRQ_N -+#define GPIO_WIFI_RESET 2*16+GPIOC_WIFI_RESET -+#define GPIO_WIFI_PWR1_ON 2*16+GPIOC_WIFI_PWR1_ON -+#define GPIO_BT_RESET 2*16+GPIOC_BT_RESET -+ -+#define GPIO_UNKNOWNC8 2*16+GPIOC_UNKNOWN8 -+#define GPIO_LCD_PWR1_ON 2*16+GPIOC_LCD_PWR1_ON -+#define GPIO_LCD_PWR2_ON 2*16+GPIOC_LCD_PWR2_ON -+#define GPIO_BOARDID2 2*16+GPIOC_BOARDID2 -+ -+#define GPIO_BOARDID1 2*16+GPIOC_BOARDID1 -+#define GPIO_BOARDID0 2*16+GPIOC_BOARDID0 -+#define GPIO_BT_PWR_ON 2*16+GPIOC_BT_PWR_ON -+#define GPIO_CHARGE_ON 2*16+GPIOC_CHARGE_ON -+ -+/* ASIC3 GPIO D bank */ -+ -+#define GPIO_KEY_OK_N 3*16+GPIOD_KEY_OK_N -+#define GPIO_KEY_RIGHT_N 3*16+GPIOD_KEY_RIGHT_N -+#define GPIO_KEY_LEFT_N 3*16+GPIOD_KEY_LEFT_N -+#define GPIO_KEY_DOWN_N 3*16+GPIOD_KEY_DOWN_N -+ -+#define GPIO_KEY_UP_N 3*16+GPIOD_KEY_UP_N -+#define GPIO_SDIO_DET 3*16+GPIOD_SDIO_DET -+#define GPIO_WIFI_PWR2_ON 3*16+GPIOD_WIFI_PWR2_ON -+#define GPIO_HW_REBOOT 3*16+GPIOD_HW_REBOOT -+ -+#define GPIO_BB_RESET1 3*16+GPIOD_BB_RESET1 -+#define GPIO_UNKNOWND9 3*16+GPIOD_UNKNOWN9 -+#define GPIO_VIBRA_PWR_ON 3*16+GPIOD_VIBRA_PWR_ON -+#define GPIO_WIFI_PWR3_ON 3*16+GPIOD_WIFI_PWR3_ON -+ -+#define GPIO_FL_PWR_ON 3*16+GPIOD_FL_PWR_ON -+#define GPIO_LCD_PWR4_ON 3*16+GPIOD_LCD_PWR4_ON -+#define GPIO_BL_KEYP_PWR_ON 3*16+GPIOD_BL_KEYP_PWR_ON -+#define GPIO_BL_KEYB_PWR_ON 3*16+GPIOD_BL_KEYB_PWR_ON -+ -+#define HTCUNIVERSAL_EGPIO_BASE PXA_CS2_PHYS+0x02000000 -+ -+#define EGPIO4_ON 4 /* something */ -+#define EGPIO5_BT_3V3_ON 5 /* Bluetooth related */ -+#define EGPIO6_WIFI_ON 6 /* WLAN related*/ -+ -+extern void htcuniversal_egpio_enable( u_int16_t bits ); -+extern void htcuniversal_egpio_disable( u_int16_t bits ); -+ -+#endif /* _HTCUNIVERSAL_ASIC_H_ */ -+ -Index: linux-2.6.22/include/asm-arm/arch-pxa/htcuniversal-gpio.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/htcuniversal-gpio.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,220 @@ -+/* -+ * include/asm-arm/arch-pxa/htcuniversal-gpio.h -+ * History: -+ * -+ * 2004-12-10 Michael Opdenacker. Wrote down GPIO settings as identified by Jamey Hicks. -+ * Reused the h2200-gpio.h file as a template. -+ */ -+ -+#ifndef _HTCUNIVERSAL_GPIO_H_ -+#define _HTCUNIVERSAL_GPIO_H_ -+ -+#include -+ -+#define GET_HTCUNIVERSAL_GPIO(gpio) \ -+ (GPLR(GPIO_NR_HTCUNIVERSAL_ ## gpio) & GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio)) -+ -+#define SET_HTCUNIVERSAL_GPIO(gpio, setp) \ -+do { \ -+if (setp) \ -+ GPSR(GPIO_NR_HTCUNIVERSAL_ ## gpio) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio); \ -+else \ -+ GPCR(GPIO_NR_HTCUNIVERSAL_ ## gpio) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio); \ -+} while (0) -+ -+#define SET_HTCUNIVERSAL_GPIO_N(gpio, setp) \ -+do { \ -+if (setp) \ -+ GPCR(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N); \ -+else \ -+ GPSR(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N); \ -+} while (0) -+ -+#define HTCUNIVERSAL_IRQ(gpio) \ -+ IRQ_GPIO(GPIO_NR_HTCUNIVERSAL_ ## gpio) -+ -+#define GPIO_NR_HTCUNIVERSAL_KEY_ON_N 0 -+#define GPIO_NR_HTCUNIVERSAL_GP_RST_N 1 -+ -+#define GPIO_NR_HTCUNIVERSAL_USB_DET 9 -+#define GPIO_NR_HTCUNIVERSAL_POWER_DET 10 -+ -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD7 12 -+#define GPIO_NR_HTCUNIVERSAL_ASIC3_SDIO_INT_N 13 -+#define GPIO_NR_HTCUNIVERSAL_ASIC3_EXT_INT 14 -+#define GPIO_NR_HTCUNIVERSAL_CS1_N 15 -+ -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD6 17 -+#define GPIO_NR_HTCUNIVERSAL_RDY 18 -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_START 19 -+ -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT7 22 -+#define GPIO_NR_HTCUNIVERSAL_SPI_CLK 23 -+#define GPIO_NR_HTCUNIVERSAL_SPI_FRM 24 -+#define GPIO_NR_HTCUNIVERSAL_SPI_DO 25 -+#define GPIO_NR_HTCUNIVERSAL_SPI_DI 26 -+ -+#define GPIO_NR_HTCUNIVERSAL_CODEC_ON 27 -+#define GPIO_NR_HTCUNIVERSAL_I2S_BCK 28 -+#define GPIO_NR_HTCUNIVERSAL_I2S_DIN 29 -+#define GPIO_NR_HTCUNIVERSAL_I2S_DOUT 30 -+#define GPIO_NR_HTCUNIVERSAL_I2S_SYNC 31 -+ -+#define GPIO_NR_HTCUNIVERSAL_RS232_ON 32 -+#define GPIO_NR_HTCUNIVERSAL_CS5_N 33 -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_RXD 34 -+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS 35 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN7 36 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN3 37 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN4 38 -+#define GPIO_NR_HTCUNIVERSAL_PHONE_TXD 39 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT6 40 -+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS 41 -+#define GPIO_NR_HTCUNIVERSAL_BT_RXD 42 -+#define GPIO_NR_HTCUNIVERSAL_BT_TXD 43 -+#define GPIO_NR_HTCUNIVERSAL_BT_UART_CTS 44 -+#define GPIO_NR_HTCUNIVERSAL_BT_UART_RTS 45 -+ -+#define GPIO_NR_HTCUNIVERSAL_SIR_RXD 42 -+#define GPIO_NR_HTCUNIVERSAL_SIR_TXD 43 -+ -+#define GPIO_NR_HTCUNIVERSAL_POE_N 48 -+#define GPIO_NR_HTCUNIVERSAL_PWE_N 49 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD3 50 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD2 51 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD4 52 -+ -+#define GPIO_NR_HTCUNIVERSAL_CIF_MCLK 53 -+#define GPIO_NR_HTCUNIVERSAL_CIF_PCLK 54 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD1 55 -+ -+#define GPIO_NR_HTCUNIVERSAL_LDD0 58 -+#define GPIO_NR_HTCUNIVERSAL_LDD1 59 -+#define GPIO_NR_HTCUNIVERSAL_LDD2 60 -+#define GPIO_NR_HTCUNIVERSAL_LDD3 61 -+#define GPIO_NR_HTCUNIVERSAL_LDD4 62 -+#define GPIO_NR_HTCUNIVERSAL_LDD5 63 -+#define GPIO_NR_HTCUNIVERSAL_LDD6 64 -+#define GPIO_NR_HTCUNIVERSAL_LDD7 65 -+#define GPIO_NR_HTCUNIVERSAL_LDD8 66 -+#define GPIO_NR_HTCUNIVERSAL_LDD9 67 -+#define GPIO_NR_HTCUNIVERSAL_LDD10 68 -+#define GPIO_NR_HTCUNIVERSAL_LDD11 69 -+#define GPIO_NR_HTCUNIVERSAL_LDD12 70 -+#define GPIO_NR_HTCUNIVERSAL_LDD13 71 -+#define GPIO_NR_HTCUNIVERSAL_LDD14 72 -+#define GPIO_NR_HTCUNIVERSAL_LDD15 73 -+ -+#define GPIO_NR_HTCUNIVERSAL_LFCLK_RD 74 -+#define GPIO_NR_HTCUNIVERSAL_LFCLK_A0 75 -+#define GPIO_NR_HTCUNIVERSAL_LFCLK_WR 76 -+#define GPIO_NR_HTCUNIVERSAL_LBIAS 77 -+ -+#define GPIO_NR_HTCUNIVERSAL_CS2_N 78 -+#define GPIO_NR_HTCUNIVERSAL_CS3_N 79 -+#define GPIO_NR_HTCUNIVERSAL_CS4_N 80 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD0 81 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD5 82 -+ -+#define GPIO_NR_HTCUNIVERSAL_CIF_LV 84 -+#define GPIO_NR_HTCUNIVERSAL_CIF_FV 85 -+ -+#define GPIO_NR_HTCUNIVERSAL_LCD1 86 -+#define GPIO_NR_HTCUNIVERSAL_LCD2 87 -+ -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN5 90 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN6 91 -+ -+#define GPIO_NR_HTCUNIVERSAL_DREQ1 97 -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_RESET 98 -+ -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN0 100 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN1 101 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN2 102 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT0 103 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT1 104 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT2 105 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT3 106 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT4 107 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT5 108 -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_UNKNOWN 109 -+#define GPIO_NR_HTCUNIVERSAL_PHONE_OFF 110 -+ -+#define GPIO_NR_HTCUNIVERSAL_USB_PUEN 112 -+#define GPIO_NR_HTCUNIVERSAL_I2S_SYSCLK 113 -+ -+#define GPIO_NR_HTCUNIVERSAL_PWM_OUT1 115 -+ -+#define GPIO_NR_HTCUNIVERSAL_I2C_SCL 117 -+#define GPIO_NR_HTCUNIVERSAL_I2C_SDA 118 -+ -+#if 0 -+#define GPIO_NR_HTCUNIVERSAL_CPU_BATT_FAULT_N -+#define GPIO_NR_HTCUNIVERSAL_ASIC3_RESET_N -+#define GPIO_NR_HTCUNIVERSAL_CHARGE_EN_N -+#define GPIO_NR_HTCUNIVERSAL_FLASH_VPEN -+#define GPIO_NR_HTCUNIVERSAL_BATT_OFF -+#define GPIO_NR_HTCUNIVERSAL_USB_CHARGE_RATE -+#define GPIO_NR_HTCUNIVERSAL_BL_DETECT_N -+#define GPIO_NR_HTCUNIVERSAL_CPU_HW_RESET_N -+#endif -+ -+ -+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_CLK_MD (23 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_FRM_MD (24 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DO_MD (25 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DI_MD (26 | GPIO_ALT_FN_1_IN) -+ -+#define GPIO_NR_HTCUNIVERSAL_I2S_BCK_MD (28 | GPIO_ALT_FN_1_OUT) -+#define GPIO_NR_HTCUNIVERSAL_I2S_DIN_MD (29 | GPIO_ALT_FN_2_IN) -+#define GPIO_NR_HTCUNIVERSAL_I2S_DOUT_MD (30 | GPIO_ALT_FN_1_OUT) -+#define GPIO_NR_HTCUNIVERSAL_I2S_SYNC_MD (31 | GPIO_ALT_FN_1_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_RXD_MD (34 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS_MD (35 | GPIO_ALT_FN_1_IN) -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_TXD_MD (39 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS_MD (41 | GPIO_ALT_FN_2_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_BT_RXD_MD (42 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_BT_TXD_MD (43 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_BT_UART_CTS_MD (44 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_BT_UART_RTS_MD (45 | GPIO_ALT_FN_2_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_SIR_RXD_MD (46 | GPIO_ALT_FN_2_IN) -+#define GPIO_NR_HTCUNIVERSAL_SIR_TXD_MD (47 | GPIO_ALT_FN_1_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_POE_N_MD (48 | GPIO_ALT_FN_2_OUT | GPIO_DFLT_HIGH) -+#define GPIO_NR_HTCUNIVERSAL_PWE_N_MD (49 | GPIO_ALT_FN_2_OUT | GPIO_DFLT_HIGH) -+ -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN0_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN0 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN1_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN1 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN2_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN2 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN3_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN3 | GPIO_ALT_FN_3_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN4_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN4 | GPIO_ALT_FN_2_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN5_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN5 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN6_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN6 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN7_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN7 | GPIO_ALT_FN_3_IN) -+ -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT0_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT0 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT1_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT1 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT2_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT2 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT3_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT3 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT4_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT4 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT5_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT5 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT6_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT6 | GPIO_ALT_FN_1_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT7_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT7 | GPIO_ALT_FN_1_OUT) -+ -+ -+#define GPIO_NR_HTCUNIVERSAL_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_PWM1OUT_MD (115 | GPIO_ALT_FN_3_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_I2C_SCL_MD (117 | GPIO_ALT_FN_1_OUT) -+#define GPIO_NR_HTCUNIVERSAL_I2C_SDA_MD (118 | GPIO_ALT_FN_1_OUT) -+ -+#endif /* _HTCUNIVERSAL_GPIO_H */ -Index: linux-2.6.22/include/asm-arm/arch-pxa/htcuniversal-init.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/htcuniversal-init.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,14 @@ -+/* -+ * include/asm/arm/arch-pxa/htcuniversal-init.h -+ * Copyright (c) 2004 SDG Systems, LLC -+ */ -+ -+#ifndef _HTCUNIVERSAL_INIT_H_ -+#define _HTCUNIVERSAL_INIT_H_ -+ -+/* htcuniversal initialization data should be found here -+ * See -init.h files from other devices for details -+ */ -+ -+#endif /* _HTCUNIVERSAL_INIT_H_ */ -+ -Index: linux-2.6.22/include/asm-arm/arch-pxa/htcuniversal.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/htcuniversal.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,3 @@ -+#include -+ -+#define HTCUNIVERSAL_ASIC3_IRQ_BASE IRQ_BOARD_START -Index: linux-2.6.22/include/asm-arm/arch-pxa/pxa-pm_ll.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/pxa-pm_ll.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,6 @@ -+struct pxa_ll_pm_ops { -+ void (*suspend)(unsigned long); -+ void (*resume)(void); -+}; -+ -+extern struct pxa_ll_pm_ops *pxa_pm_set_ll_ops(struct pxa_ll_pm_ops *new_ops); -Index: linux-2.6.22/include/asm-arm/arch-pxa/sharpsl.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-pxa/sharpsl.h 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-pxa/sharpsl.h 2007-09-11 12:53:37.000000000 +0200 -@@ -25,12 +25,6 @@ - /* - * SharpSL Backlight - */ --struct corgibl_machinfo { -- int max_intensity; -- int default_intensity; -- int limit_mask; -- void (*set_bl_intensity)(int intensity); --}; - extern void corgibl_limit_intensity(int limit); - - -Index: linux-2.6.22/include/asm-arm/hardware/asic3_keys.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/hardware/asic3_keys.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,18 @@ -+#include -+ -+struct asic3_keys_button { -+ /* Configuration parameters */ -+ int keycode; -+ int gpio; -+ int active_low; -+ char *desc; -+ int type; -+ /* Internal state vars - add below */ -+}; -+ -+struct asic3_keys_platform_data { -+ struct asic3_keys_button *buttons; -+ int nbuttons; -+ struct input_dev *input; -+ struct device *asic3_dev; -+}; -Index: linux-2.6.22/include/asm-arm/hardware/asic3_leds.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/hardware/asic3_leds.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,34 @@ -+/* -+ * LEDs support for HTC ASIC3 devices. -+ * -+ * Copyright (c) 2006 Anton Vorontsov -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+struct asic3_leds_machinfo; -+ -+struct asic3_led { -+ struct led_classdev led_cdev; -+ int hw_num; /* Number of "hardware-accelerated" led */ -+ int gpio_num; /* Number of GPIO if hw_num == -1 */ -+ struct asic3_leds_machinfo *machinfo; -+}; -+ -+struct asic3_leds_machinfo { -+ int num_leds; -+ struct asic3_led *leds; -+ struct platform_device *asic3_pdev; -+}; -+ -+extern int asic3_leds_register(void); -+extern void asic3_leds_unregister(void); -+ -Index: linux-2.6.22/include/asm-arm/hardware/ipaq-asic3.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/hardware/ipaq-asic3.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,602 @@ -+/* -+ * -+ * Definitions for the HTC ASIC3 chip found in several handheld devices -+ * -+ * Copyright 2001 Compaq Computer Corporation. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, -+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS -+ * FITNESS FOR ANY PARTICULAR PURPOSE. -+ * -+ * Author: Andrew Christian -+ * -+ */ -+ -+#ifndef IPAQ_ASIC3_H -+#define IPAQ_ASIC3_H -+ -+/****************************************************/ -+/* IPAQ, ASIC #3, replaces ASIC #1 */ -+ -+#define IPAQ_ASIC3_OFFSET(x,y) (_IPAQ_ASIC3_ ## x ## _Base + _IPAQ_ASIC3_ ## x ## _ ## y) -+#define IPAQ_ASIC3_GPIO_OFFSET(x,y) (_IPAQ_ASIC3_GPIO_ ## x ## _Base + _IPAQ_ASIC3_GPIO_ ## y) -+ -+ -+/* All offsets below are specified with the following address bus shift */ -+#define ASIC3_DEFAULT_ADDR_SHIFT 2 -+ -+#define _IPAQ_ASIC3_GPIO_A_Base 0x0000 -+#define _IPAQ_ASIC3_GPIO_B_Base 0x0100 -+#define _IPAQ_ASIC3_GPIO_C_Base 0x0200 -+#define _IPAQ_ASIC3_GPIO_D_Base 0x0300 -+ -+#define _IPAQ_ASIC3_GPIO_Mask 0x00 /* R/W 0:don't mask, 1:mask interrupt */ -+#define _IPAQ_ASIC3_GPIO_Direction 0x04 /* R/W 0:input, 1:output */ -+#define _IPAQ_ASIC3_GPIO_Out 0x08 /* R/W 0:output low, 1:output high */ -+#define _IPAQ_ASIC3_GPIO_TriggerType 0x0c /* R/W 0:level, 1:edge */ -+#define _IPAQ_ASIC3_GPIO_EdgeTrigger 0x10 /* R/W 0:falling, 1:rising */ -+#define _IPAQ_ASIC3_GPIO_LevelTrigger 0x14 /* R/W 0:low, 1:high level detect */ -+#define _IPAQ_ASIC3_GPIO_SleepMask 0x18 /* R/W 0:don't mask, 1:mask trigger in sleep mode */ -+#define _IPAQ_ASIC3_GPIO_SleepOut 0x1c /* R/W level 0:low, 1:high in sleep mode */ -+#define _IPAQ_ASIC3_GPIO_BattFaultOut 0x20 /* R/W level 0:low, 1:high in batt_fault */ -+#define _IPAQ_ASIC3_GPIO_IntStatus 0x24 /* R/W 0:none, 1:detect */ -+#define _IPAQ_ASIC3_GPIO_AltFunction 0x28 /* R/W 0:normal control 1:LED register control */ -+#define _IPAQ_ASIC3_GPIO_SleepConf 0x2c /* R/W bit 1: autosleep 0: disable gposlpout in normal mode, enable gposlpout in sleep mode */ -+#define _IPAQ_ASIC3_GPIO_Status 0x30 /* R Pin status */ -+ -+#define IPAQ_ASIC3_GPIO_A_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Mask ) -+#define IPAQ_ASIC3_GPIO_A_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Direction ) -+#define IPAQ_ASIC3_GPIO_A_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Out ) -+#define IPAQ_ASIC3_GPIO_A_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, A, TriggerType ) -+#define IPAQ_ASIC3_GPIO_A_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, A, EdgeTrigger ) -+#define IPAQ_ASIC3_GPIO_A_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, A, LevelTrigger ) -+#define IPAQ_ASIC3_GPIO_A_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, A, SleepMask ) -+#define IPAQ_ASIC3_GPIO_A_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, A, SleepOut ) -+#define IPAQ_ASIC3_GPIO_A_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, A, BattFaultOut ) -+#define IPAQ_ASIC3_GPIO_A_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, A, IntStatus ) -+#define IPAQ_ASIC3_GPIO_A_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, A, AltFunction ) -+#define IPAQ_ASIC3_GPIO_A_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, A, SleepConf ) -+#define IPAQ_ASIC3_GPIO_A_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Status ) -+ -+#define IPAQ_ASIC3_GPIO_B_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Mask ) -+#define IPAQ_ASIC3_GPIO_B_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Direction ) -+#define IPAQ_ASIC3_GPIO_B_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Out ) -+#define IPAQ_ASIC3_GPIO_B_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, B, TriggerType ) -+#define IPAQ_ASIC3_GPIO_B_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, B, EdgeTrigger ) -+#define IPAQ_ASIC3_GPIO_B_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, B, LevelTrigger ) -+#define IPAQ_ASIC3_GPIO_B_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, B, SleepMask ) -+#define IPAQ_ASIC3_GPIO_B_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, B, SleepOut ) -+#define IPAQ_ASIC3_GPIO_B_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, B, BattFaultOut ) -+#define IPAQ_ASIC3_GPIO_B_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, B, IntStatus ) -+#define IPAQ_ASIC3_GPIO_B_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, B, AltFunction ) -+#define IPAQ_ASIC3_GPIO_B_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, B, SleepConf ) -+#define IPAQ_ASIC3_GPIO_B_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Status ) -+ -+#define IPAQ_ASIC3_GPIO_C_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Mask ) -+#define IPAQ_ASIC3_GPIO_C_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Direction ) -+#define IPAQ_ASIC3_GPIO_C_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Out ) -+#define IPAQ_ASIC3_GPIO_C_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, C, TriggerType ) -+#define IPAQ_ASIC3_GPIO_C_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, C, EdgeTrigger ) -+#define IPAQ_ASIC3_GPIO_C_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, C, LevelTrigger ) -+#define IPAQ_ASIC3_GPIO_C_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, C, SleepMask ) -+#define IPAQ_ASIC3_GPIO_C_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, C, SleepOut ) -+#define IPAQ_ASIC3_GPIO_C_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, C, BattFaultOut ) -+#define IPAQ_ASIC3_GPIO_C_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, C, IntStatus ) -+#define IPAQ_ASIC3_GPIO_C_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, C, AltFunction ) -+#define IPAQ_ASIC3_GPIO_C_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, C, SleepConf ) -+#define IPAQ_ASIC3_GPIO_C_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Status ) -+ -+#define IPAQ_ASIC3_GPIO_D_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Mask ) -+#define IPAQ_ASIC3_GPIO_D_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Direction ) -+#define IPAQ_ASIC3_GPIO_D_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Out ) -+#define IPAQ_ASIC3_GPIO_D_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, D, TriggerType ) -+#define IPAQ_ASIC3_GPIO_D_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, D, EdgeTrigger ) -+#define IPAQ_ASIC3_GPIO_D_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, D, LevelTrigger ) -+#define IPAQ_ASIC3_GPIO_D_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, D, SleepMask ) -+#define IPAQ_ASIC3_GPIO_D_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, D, SleepOut ) -+#define IPAQ_ASIC3_GPIO_D_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, D, BattFaultOut ) -+#define IPAQ_ASIC3_GPIO_D_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, D, IntStatus ) -+#define IPAQ_ASIC3_GPIO_D_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, D, AltFunction ) -+#define IPAQ_ASIC3_GPIO_D_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, D, SleepConf ) -+#define IPAQ_ASIC3_GPIO_D_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Status ) -+ -+#define _IPAQ_ASIC3_SPI_Base 0x0400 -+#define _IPAQ_ASIC3_SPI_Control 0x0000 -+#define _IPAQ_ASIC3_SPI_TxData 0x0004 -+#define _IPAQ_ASIC3_SPI_RxData 0x0008 -+#define _IPAQ_ASIC3_SPI_Int 0x000c -+#define _IPAQ_ASIC3_SPI_Status 0x0010 -+ -+#define IPAQ_ASIC3_SPI_Control(_b) IPAQ_ASIC3( _b, u16, SPI, Control ) -+#define IPAQ_ASIC3_SPI_TxData(_b) IPAQ_ASIC3( _b, u16, SPI, TxData ) -+#define IPAQ_ASIC3_SPI_RxData(_b) IPAQ_ASIC3( _b, u16, SPI, RxData ) -+#define IPAQ_ASIC3_SPI_Int(_b) IPAQ_ASIC3( _b, u16, SPI, Int ) -+#define IPAQ_ASIC3_SPI_Status(_b) IPAQ_ASIC3( _b, u16, SPI, Status ) -+ -+#define SPI_CONTROL_SPR(clk) ((clk) & 0x0f) /* Clock rate */ -+ -+#define _IPAQ_ASIC3_PWM_0_Base 0x0500 -+#define _IPAQ_ASIC3_PWM_1_Base 0x0600 -+#define _IPAQ_ASIC3_PWM_TimeBase 0x0000 -+#define _IPAQ_ASIC3_PWM_PeriodTime 0x0004 -+#define _IPAQ_ASIC3_PWM_DutyTime 0x0008 -+ -+#define IPAQ_ASIC3_PWM_TimeBase(_b, x) IPAQ_ASIC3_N( _b, u16, PWM, x, TimeBase ) -+#define IPAQ_ASIC3_PWM_PeriodTime(_b, x) IPAQ_ASIC3_N( _b, u16, PWM, x, PeriodTime ) -+#define IPAQ_ASIC3_PWM_DutyTime(_b, x) IPAQ_ASIC3_N( _b, u16, PWM, x, DutyTime ) -+ -+#define PWM_TIMEBASE_VALUE(x) ((x)&0xf) /* Low 4 bits sets time base */ -+#define PWM_TIMEBASE_ENABLE (1 << 4) /* Enable clock */ -+ -+#define _IPAQ_ASIC3_LED_0_Base 0x0700 -+#define _IPAQ_ASIC3_LED_1_Base 0x0800 -+#define _IPAQ_ASIC3_LED_2_Base 0x0900 -+#define _IPAQ_ASIC3_LED_TimeBase 0x0000 /* R/W 7 bits */ -+#define _IPAQ_ASIC3_LED_PeriodTime 0x0004 /* R/W 12 bits */ -+#define _IPAQ_ASIC3_LED_DutyTime 0x0008 /* R/W 12 bits */ -+#define _IPAQ_ASIC3_LED_AutoStopCount 0x000c /* R/W 16 bits */ -+ -+#define IPAQ_ASIC3_LED_TimeBase(_b, x) IPAQ_ASIC3_N( _b, u8, LED, x, TimeBase ) -+#define IPAQ_ASIC3_LED_PeriodTime(_b, x) IPAQ_ASIC3_N( _b, u16, LED, x, PeriodTime ) -+#define IPAQ_ASIC3_LED_DutyTime(_b, x) IPAQ_ASIC3_N( _b, u16, LED, x, DutyTime ) -+#define IPAQ_ASIC3_LED_AutoStopCount(_b, x) IPAQ_ASIC3_N( _b, u16, LED, x, AutoStopCount ) -+ -+/* LED TimeBase bits - match ASIC2 */ -+#define LED_TBS 0x0f /* Low 4 bits sets time base, max = 13 */ -+ /* Note: max = 5 on hx4700 */ -+ /* 0: maximum time base */ -+ /* 1: maximum time base / 2 */ -+ /* n: maximum time base / 2^n */ -+ -+#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */ -+#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop set 0:disable, 1:enable */ -+#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */ -+ -+#define _IPAQ_ASIC3_CLOCK_Base 0x0A00 -+#define _IPAQ_ASIC3_CLOCK_CDEX 0x00 -+#define _IPAQ_ASIC3_CLOCK_SEL 0x04 -+ -+#define IPAQ_ASIC3_CLOCK_CDEX(_b) IPAQ_ASIC3( _b, u16, CLOCK, CDEX ) -+#define IPAQ_ASIC3_CLOCK_SEL(_b) IPAQ_ASIC3( _b, u16, CLOCK, SEL ) -+ -+#define CLOCK_CDEX_SOURCE (1 << 0) /* 2 bits */ -+#define CLOCK_CDEX_SOURCE0 (1 << 0) -+#define CLOCK_CDEX_SOURCE1 (1 << 1) -+#define CLOCK_CDEX_SPI (1 << 2) -+#define CLOCK_CDEX_OWM (1 << 3) -+#define CLOCK_CDEX_PWM0 (1 << 4) -+#define CLOCK_CDEX_PWM1 (1 << 5) -+#define CLOCK_CDEX_LED0 (1 << 6) -+#define CLOCK_CDEX_LED1 (1 << 7) -+#define CLOCK_CDEX_LED2 (1 << 8) -+ -+#define CLOCK_CDEX_SD_HOST (1 << 9) /* R/W: SD host clock source 24.576M/12.288M */ -+#define CLOCK_CDEX_SD_BUS (1 << 10) /* R/W: SD bus clock source control 24.576M/12.288M */ -+#define CLOCK_CDEX_SMBUS (1 << 11) -+#define CLOCK_CDEX_CONTROL_CX (1 << 12) -+ -+#define CLOCK_CDEX_EX0 (1 << 13) /* R/W: 32.768 kHz crystal */ -+#define CLOCK_CDEX_EX1 (1 << 14) /* R/W: 24.576 MHz crystal */ -+ -+#define CLOCK_SEL_SD_HCLK_SEL (1 << 0) /* R/W: SDIO host clock select - 1: 24.576 Mhz, 0: 12.288 MHz */ -+#define CLOCK_SEL_SD_BCLK_SEL (1 << 1) /* R/W: SDIO bus clock select - 1: 24.576 MHz, 0: 12.288 MHz */ -+#define CLOCK_SEL_CX (1 << 2) /* R/W: INT clock source control (32.768 kHz) */ -+ -+ -+#define _IPAQ_ASIC3_INTR_Base 0x0B00 -+ -+#define _IPAQ_ASIC3_INTR_IntMask 0x00 /* Interrupt mask control */ -+#define _IPAQ_ASIC3_INTR_PIntStat 0x04 /* Peripheral interrupt status */ -+#define _IPAQ_ASIC3_INTR_IntCPS 0x08 /* Interrupt timer clock pre-scale */ -+#define _IPAQ_ASIC3_INTR_IntTBS 0x0c /* Interrupt timer set */ -+ -+#define IPAQ_ASIC3_INTR_IntMask(_b) IPAQ_ASIC3( _b, u8, INTR, IntMask ) -+#define IPAQ_ASIC3_INTR_PIntStat(_b) IPAQ_ASIC3( _b, u8, INTR, PIntStat ) -+#define IPAQ_ASIC3_INTR_IntCPS(_b) IPAQ_ASIC3( _b, u8, INTR, IntCPS ) -+#define IPAQ_ASIC3_INTR_IntTBS(_b) IPAQ_ASIC3( _b, u16, INTR, IntTBS ) -+ -+#define ASIC3_INTMASK_GINTMASK (1 << 0) /* Global interrupt mask 1:enable */ -+#define ASIC3_INTMASK_GINTEL (1 << 1) /* 1: rising edge, 0: hi level */ -+#define ASIC3_INTMASK_MASK0 (1 << 2) -+#define ASIC3_INTMASK_MASK1 (1 << 3) -+#define ASIC3_INTMASK_MASK2 (1 << 4) -+#define ASIC3_INTMASK_MASK3 (1 << 5) -+#define ASIC3_INTMASK_MASK4 (1 << 6) -+#define ASIC3_INTMASK_MASK5 (1 << 7) -+ -+#define ASIC3_INTR_PERIPHERAL_A (1 << 0) -+#define ASIC3_INTR_PERIPHERAL_B (1 << 1) -+#define ASIC3_INTR_PERIPHERAL_C (1 << 2) -+#define ASIC3_INTR_PERIPHERAL_D (1 << 3) -+#define ASIC3_INTR_LED0 (1 << 4) -+#define ASIC3_INTR_LED1 (1 << 5) -+#define ASIC3_INTR_LED2 (1 << 6) -+#define ASIC3_INTR_SPI (1 << 7) -+#define ASIC3_INTR_SMBUS (1 << 8) -+#define ASIC3_INTR_OWM (1 << 9) -+ -+#define ASIC3_INTR_CPS(x) ((x)&0x0f) /* 4 bits, max 14 */ -+#define ASIC3_INTR_CPS_SET ( 1 << 4 ) /* Time base enable */ -+ -+ -+/* Basic control of the SD ASIC */ -+#define _IPAQ_ASIC3_SDHWCTRL_Base 0x0E00 -+ -+#define _IPAQ_ASIC3_SDHWCTRL_SDConf 0x00 -+#define IPAQ_ASIC3_SDHWCTRL_SDConf(_b) IPAQ_ASIC3( _b, u8, SDHWCTRL, SDConf ) -+ -+#define ASIC3_SDHWCTRL_SUSPEND (1 << 0) /* 1=suspend all SD operations */ -+#define ASIC3_SDHWCTRL_CLKSEL (1 << 1) /* 1=SDICK, 0=HCLK */ -+#define ASIC3_SDHWCTRL_PCLR (1 << 2) /* All registers of SDIO cleared */ -+#define ASIC3_SDHWCTRL_LEVCD (1 << 3) /* Level of SD card detection: 1:high, 0:low */ -+#define ASIC3_SDHWCTRL_LEVWP (1 << 4) /* Level of SD card write protection: 1=low, 0=high */ -+#define ASIC3_SDHWCTRL_SDLED (1 << 5) /* SD card LED signal 1=enable, 0=disable */ -+#define ASIC3_SDHWCTRL_SDPWR (1 << 6) /* SD card power supply control 1=enable */ -+ -+ -+/* This is a pointer to an array of 12 u32 values - but only the lower 2 bytes matter */ -+/* Use it as "IPAQ_ASIC3_HWPROTECT_ARRAY[x]" */ -+ -+#define _IPAQ_ASIC3_HWPROTECT_Base 0x1000 -+#define IPAQ_ASIC3_HWPROTECT_ARRAY ((volatile u32*)(_IPAQ_ASIC3_Base + _IPAQ_ASIC3_HWPROTECT_Base)) -+#define HWPROTECT_ARRAY_LEN 12 -+#define HWPROTECT_ARRAY_VALUES {0x4854,0x432d,0x5344,0x494f,0x2050,0x2f4e,0x3a33,0x3048,0x3830,0x3032,0x382d,0x3030} -+ -+ -+#define _IPAQ_ASIC3_EXTCF_Base 0x1100 -+ -+#define _IPAQ_ASIC3_EXTCF_Select 0x00 -+#define _IPAQ_ASIC3_EXTCF_Reset 0x04 -+ -+#define IPAQ_ASIC3_EXTCF_Select(_b) IPAQ_ASIC3( _b, u16, EXTCF, Select ) -+#define IPAQ_ASIC3_EXTCF_Reset(_b) IPAQ_ASIC3( _b, u16, EXTCF, Reset ) -+ -+#define ASIC3_EXTCF_SMOD0 (1 << 0) /* slot number of mode 0 */ -+#define ASIC3_EXTCF_SMOD1 (1 << 1) /* slot number of mode 1 */ -+#define ASIC3_EXTCF_SMOD2 (1 << 2) /* slot number of mode 2 */ -+#define ASIC3_EXTCF_OWM_EN (1 << 4) /* enable onewire module */ -+#define ASIC3_EXTCF_OWM_SMB (1 << 5) /* OWM bus selection */ -+#define ASIC3_EXTCF_OWM_RESET (1 << 6) /* undocumented, used by OWM and CF */ -+#define ASIC3_EXTCF_CF0_SLEEP_MODE (1 << 7) /* CF0 sleep state control */ -+#define ASIC3_EXTCF_CF1_SLEEP_MODE (1 << 8) /* CF1 sleep state control */ -+#define ASIC3_EXTCF_CF0_PWAIT_EN (1 << 10) /* CF0 PWAIT_n control */ -+#define ASIC3_EXTCF_CF1_PWAIT_EN (1 << 11) /* CF1 PWAIT_n control */ -+#define ASIC3_EXTCF_CF0_BUF_EN (1 << 12) /* CF0 buffer control */ -+#define ASIC3_EXTCF_CF1_BUF_EN (1 << 13) /* CF1 buffer control */ -+#define ASIC3_EXTCF_SD_MEM_ENABLE (1 << 14) -+#define ASIC3_EXTCF_CF_SLEEP (1 << 15) /* CF sleep mode control */ -+ -+/***************************************************************************** -+ * The Onewire interface registers -+ * -+ * OWM_CMD -+ * OWM_DAT -+ * OWM_INTR -+ * OWM_INTEN -+ * OWM_CLKDIV -+ * -+ *****************************************************************************/ -+ -+#define _IPAQ_ASIC3_OWM_Base 0xC00 -+ -+#define _IPAQ_ASIC3_OWM_CMD 0x00 -+#define _IPAQ_ASIC3_OWM_DAT 0x04 -+#define _IPAQ_ASIC3_OWM_INTR 0x08 -+#define _IPAQ_ASIC3_OWM_INTEN 0x0C -+#define _IPAQ_ASIC3_OWM_CLKDIV 0x10 -+ -+#define ASIC3_OWM_CMD_ONEWR (1 << 0) -+#define ASIC3_OWM_CMD_SRA (1 << 1) -+#define ASIC3_OWM_CMD_DQO (1 << 2) -+#define ASIC3_OWM_CMD_DQI (1 << 3) -+ -+#define ASIC3_OWM_INTR_PD (1 << 0) -+#define ASIC3_OWM_INTR_PDR (1 << 1) -+#define ASIC3_OWM_INTR_TBE (1 << 2) -+#define ASIC3_OWM_INTR_TEMP (1 << 3) -+#define ASIC3_OWM_INTR_RBF (1 << 4) -+ -+#define ASIC3_OWM_INTEN_EPD (1 << 0) -+#define ASIC3_OWM_INTEN_IAS (1 << 1) -+#define ASIC3_OWM_INTEN_ETBE (1 << 2) -+#define ASIC3_OWM_INTEN_ETMT (1 << 3) -+#define ASIC3_OWM_INTEN_ERBF (1 << 4) -+ -+#define ASIC3_OWM_CLKDIV_PRE (3 << 0) /* two bits wide at bit position 0 */ -+#define ASIC3_OWM_CLKDIV_DIV (7 << 2) /* 3 bits wide at bit position 2 */ -+ -+ -+/***************************************************************************** -+ * The SD configuration registers are at a completely different location -+ * in memory. They are divided into three sets of registers: -+ * -+ * SD_CONFIG Core configuration register -+ * SD_CTRL Control registers for SD operations -+ * SDIO_CTRL Control registers for SDIO operations -+ * -+ *****************************************************************************/ -+ -+#define IPAQ_ASIC3_SD_CONFIG(_b, s,x) \ -+ (*((volatile s *) ((_b) + _IPAQ_ASIC3_SD_CONFIG_Base + (_IPAQ_ASIC3_SD_CONFIG_ ## x)))) -+ -+#define _IPAQ_ASIC3_SD_CONFIG_Base 0x0400 // Assumes 32 bit addressing -+ -+#define _IPAQ_ASIC3_SD_CONFIG_Command 0x08 /* R/W: Command */ -+#define _IPAQ_ASIC3_SD_CONFIG_Addr0 0x20 /* [9:31] SD Control Register Base Address */ -+#define _IPAQ_ASIC3_SD_CONFIG_Addr1 0x24 /* [9:31] SD Control Register Base Address */ -+#define _IPAQ_ASIC3_SD_CONFIG_IntPin 0x78 /* R/O: interrupt assigned to pin */ -+#define _IPAQ_ASIC3_SD_CONFIG_ClkStop 0x80 /* Set to 0x1f to clock SD controller, 0 otherwise. */ -+ /* at 0x82 - Gated Clock Control */ -+#define _IPAQ_ASIC3_SD_CONFIG_ClockMode 0x84 /* Control clock of SD controller */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_PinStatus 0x88 /* R/0: read status of SD pins */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Power1 0x90 /* Power1 - manual power control */ -+ /* Power2 is at 0x92 - auto power up after card inserted */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Power3 0x94 /* auto power down when card removed */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_CardDetect 0x98 /* */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Slot 0xA0 /* R/O: define support slot number */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk1 0x1E0 /* Could be used for gated clock (don't use) */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk2 0x1E2 /* Could be used for gated clock (don't use) */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable 0x1E8 /* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_GPIO_Status 0x1EC /* GPIO Status Reg. */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk3 0x1F0 /* Bit 1: double buffer/single buffer */ -+ -+#define IPAQ_ASIC3_SD_CONFIG_Command(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, Command ) -+#define IPAQ_ASIC3_SD_CONFIG_Addr0(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, Addr0 ) -+#define IPAQ_ASIC3_SD_CONFIG_Addr1(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, Addr1 ) -+#define IPAQ_ASIC3_SD_CONFIG_IntPin(_b) IPAQ_ASIC3_SD_CONFIG(_b, u8, IntPin ) -+#define IPAQ_ASIC3_SD_CONFIG_ClkStop(_b) IPAQ_ASIC3_SD_CONFIG(_b, u8, ClkStop ) -+#define IPAQ_ASIC3_SD_CONFIG_ClockMode(_b) IPAQ_ASIC3_SD_CONFIG(_b, u8, ClockMode ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_PinStatus(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_PinStatus ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Power1(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Power1 ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Power3(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Power3 ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_CardDetect(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_CardDetect ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Slot(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Slot ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk1(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_ExtGateClk1 ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk3(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_ExtGateClk3 ) -+ -+#define SD_CONFIG_ -+ -+#define SD_CONFIG_COMMAND_MAE (1<<1) /* Memory access enable (set to 1 to access SD Controller) */ -+ -+#define SD_CONFIG_CLK_ENABLE_ALL 0x1f -+ -+#define SD_CONFIG_POWER1_PC_33V 0x0200 /* Set for 3.3 volts */ -+#define SD_CONFIG_POWER1_PC_OFF 0x0000 /* Turn off power */ -+ -+#define SD_CONFIG_CARDDETECTMODE_CLK ((x)&0x3) /* two bits - number of cycles for card detection */ -+ -+ -+#define _IPAQ_ASIC3_SD_CTRL_Base 0x1000 -+ -+#define IPAQ_ASIC3_SD(_b, s,x) \ -+ (*((volatile s *) ((_b) + _IPAQ_ASIC3_SD_CTRL_Base + (_IPAQ_ASIC3_SD_CTRL_ ## x)))) -+ -+#define _IPAQ_ASIC3_SD_CTRL_Cmd 0x00 -+#define _IPAQ_ASIC3_SD_CTRL_Arg0 0x08 -+#define _IPAQ_ASIC3_SD_CTRL_Arg1 0x0C -+#define _IPAQ_ASIC3_SD_CTRL_StopInternal 0x10 -+#define _IPAQ_ASIC3_SD_CTRL_TransferSectorCount 0x14 -+#define _IPAQ_ASIC3_SD_CTRL_Response0 0x18 -+#define _IPAQ_ASIC3_SD_CTRL_Response1 0x1C -+#define _IPAQ_ASIC3_SD_CTRL_Response2 0x20 -+#define _IPAQ_ASIC3_SD_CTRL_Response3 0x24 -+#define _IPAQ_ASIC3_SD_CTRL_Response4 0x28 -+#define _IPAQ_ASIC3_SD_CTRL_Response5 0x2C -+#define _IPAQ_ASIC3_SD_CTRL_Response6 0x30 -+#define _IPAQ_ASIC3_SD_CTRL_Response7 0x34 -+#define _IPAQ_ASIC3_SD_CTRL_CardStatus 0x38 -+#define _IPAQ_ASIC3_SD_CTRL_BufferCtrl 0x3C -+#define _IPAQ_ASIC3_SD_CTRL_IntMaskCard 0x40 -+#define _IPAQ_ASIC3_SD_CTRL_IntMaskBuffer 0x44 -+#define _IPAQ_ASIC3_SD_CTRL_CardClockCtrl 0x48 -+#define _IPAQ_ASIC3_SD_CTRL_MemCardXferDataLen 0x4C -+#define _IPAQ_ASIC3_SD_CTRL_MemCardOptionSetup 0x50 -+#define _IPAQ_ASIC3_SD_CTRL_ErrorStatus0 0x58 -+#define _IPAQ_ASIC3_SD_CTRL_ErrorStatus1 0x5C -+#define _IPAQ_ASIC3_SD_CTRL_DataPort 0x60 -+#define _IPAQ_ASIC3_SD_CTRL_TransactionCtrl 0x68 -+#define _IPAQ_ASIC3_SD_CTRL_SoftwareReset 0x1C0 -+ -+#define IPAQ_ASIC3_SD_CTRL_Cmd(_b) IPAQ_ASIC3_SD( _b, u16, Cmd ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Arg0(_b) IPAQ_ASIC3_SD( _b, u16, Arg0 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Arg1(_b) IPAQ_ASIC3_SD( _b, u16, Arg1 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_StopInternal(_b) IPAQ_ASIC3_SD( _b, u16, StopInternal ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_TransferSectorCount(_b) IPAQ_ASIC3_SD( _b, u16, TransferSectorCount ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response0(_b) IPAQ_ASIC3_SD( _b, u16, Response0 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response1(_b) IPAQ_ASIC3_SD( _b, u16, Response1 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response2(_b) IPAQ_ASIC3_SD( _b, u16, Response2 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response3(_b) IPAQ_ASIC3_SD( _b, u16, Response3 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response4(_b) IPAQ_ASIC3_SD( _b, u16, Response4 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response5(_b) IPAQ_ASIC3_SD( _b, u16, Response5 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response6(_b) IPAQ_ASIC3_SD( _b, u16, Response6 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response7(_b) IPAQ_ASIC3_SD( _b, u16, Response7 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_CardStatus(_b) IPAQ_ASIC3_SD( _b, u16, CardStatus ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_BufferCtrl(_b) IPAQ_ASIC3_SD( _b, u16, BufferCtrl ) /* and error status*/ -+#define IPAQ_ASIC3_SD_CTRL_IntMaskCard(_b) IPAQ_ASIC3_SD( _b, u16, IntMaskCard ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_IntMaskBuffer(_b) IPAQ_ASIC3_SD( _b, u16, IntMaskBuffer ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_CardClockCtrl(_b) IPAQ_ASIC3_SD( _b, u16, CardClockCtrl ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_MemCardXferDataLen(_b) IPAQ_ASIC3_SD( _b, u16, MemCardXferDataLen ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_MemCardOptionSetup(_b) IPAQ_ASIC3_SD( _b, u16, MemCardOptionSetup ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_ErrorStatus0(_b) IPAQ_ASIC3_SD( _b, u16, ErrorStatus0 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_ErrorStatus1(_b) IPAQ_ASIC3_SD( _b, u16, ErrorStatus1 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_DataPort(_b) IPAQ_ASIC3_SD( _b, u16, DataPort ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_TransactionCtrl(_b) IPAQ_ASIC3_SD( _b, u16, TransactionCtrl ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_SoftwareReset(_b) IPAQ_ASIC3_SD( _b, u16, SoftwareReset ) /* */ -+ -+#define SD_CTRL_SOFTWARE_RESET_CLEAR (1<<0) -+ -+#define SD_CTRL_TRANSACTIONCONTROL_SET (1<<8) // 0x0100 -+ -+#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD (1<<15)// 0x8000 -+#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK (1<<8) // 0x0100 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512 (1<<7) // 0x0080 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256 (1<<6) // 0x0040 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128 (1<<5) // 0x0020 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64 (1<<4) // 0x0010 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32 (1<<3) // 0x0008 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16 (1<<2) // 0x0004 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8 (1<<1) // 0x0002 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4 (1<<0) // 0x0001 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2 (0<<0) // 0x0000 -+ -+#define MEM_CARD_OPTION_REQUIRED 0x000e -+#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x) (((x)&0x0f)<<4) /* Four bits */ -+#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT (1<<14) // 0x4000 -+#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1 (1<<15) // 0x8000 -+#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4 (0<<15) //~0x8000 -+ -+#define SD_CTRL_COMMAND_INDEX(x) ((x)&0x3f) /* 0=CMD0, 1=CMD1, ..., 63=CMD63 */ -+#define SD_CTRL_COMMAND_TYPE_CMD (0 << 6) -+#define SD_CTRL_COMMAND_TYPE_ACMD (1 << 6) -+#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION (2 << 6) -+#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL (0 << 8) -+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1 (4 << 8) -+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B (5 << 8) -+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2 (6 << 8) -+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3 (7 << 8) -+#define SD_CTRL_COMMAND_DATA_PRESENT (1 << 11) -+#define SD_CTRL_COMMAND_TRANSFER_READ (1 << 12) -+#define SD_CTRL_COMMAND_TRANSFER_WRITE (0 << 12) -+#define SD_CTRL_COMMAND_MULTI_BLOCK (1 << 13) -+#define SD_CTRL_COMMAND_SECURITY_CMD (1 << 14) -+ -+#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12 (1 << 0) -+#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12 (1 << 8) -+ -+#define SD_CTRL_CARDSTATUS_RESPONSE_END (1 << 0) -+#define SD_CTRL_CARDSTATUS_RW_END (1 << 2) -+#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0 (1 << 3) -+#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0 (1 << 4) -+#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0 (1 << 5) -+#define SD_CTRL_CARDSTATUS_WRITE_PROTECT (1 << 7) -+#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3 (1 << 8) -+#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3 (1 << 9) -+#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3 (1 << 10) -+ -+#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR (1 << 0) // 0x0001 -+#define SD_CTRL_BUFFERSTATUS_CRC_ERROR (1 << 1) // 0x0002 -+#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR (1 << 2) // 0x0004 -+#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT (1 << 3) // 0x0008 -+#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW (1 << 4) // 0x0010 -+#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW (1 << 5) // 0x0020 -+#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT (1 << 6) // 0x0040 -+#define SD_CTRL_BUFFERSTATUS_UNK7 (1 << 7) // 0x0080 -+#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE (1 << 8) // 0x0100 -+#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE (1 << 9) // 0x0200 -+#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION (1 << 13)// 0x2000 -+#define SD_CTRL_BUFFERSTATUS_CMD_BUSY (1 << 14)// 0x4000 -+#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS (1 << 15)// 0x8000 -+ -+#define SD_CTRL_INTMASKCARD_RESPONSE_END (1 << 0) // 0x0001 -+#define SD_CTRL_INTMASKCARD_RW_END (1 << 2) // 0x0004 -+#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0 (1 << 3) // 0x0008 -+#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0 (1 << 4) // 0x0010 -+#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5) // 0x0020 -+#define SD_CTRL_INTMASKCARD_UNK6 (1 << 6) // 0x0040 -+#define SD_CTRL_INTMASKCARD_WRITE_PROTECT (1 << 7) // 0x0080 -+#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3 (1 << 8) // 0x0100 -+#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3 (1 << 9) // 0x0200 -+#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10)// 0x0400 -+ -+#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR (1 << 0) // 0x0001 -+#define SD_CTRL_INTMASKBUFFER_CRC_ERROR (1 << 1) // 0x0002 -+#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR (1 << 2) // 0x0004 -+#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT (1 << 3) // 0x0008 -+#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW (1 << 4) // 0x0010 -+#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW (1 << 5) // 0x0020 -+#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT (1 << 6) // 0x0040 -+#define SD_CTRL_INTMASKBUFFER_UNK7 (1 << 7) // 0x0080 -+#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE (1 << 8) // 0x0100 -+#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE (1 << 9) // 0x0200 -+#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION (1 << 13)// 0x2000 -+#define SD_CTRL_INTMASKBUFFER_CMD_BUSY (1 << 14)// 0x4000 -+#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS (1 << 15)// 0x8000 -+ -+#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR (1 << 0) // 0x0001 -+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2) // 0x0004 -+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12 (1 << 3) // 0x0008 -+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA (1 << 4) // 0x0010 -+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS (1 << 5) // 0x0020 -+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 8) // 0x0100 -+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12 (1 << 9) // 0x0200 -+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA (1 << 10)// 0x0400 -+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD (1 << 11)// 0x0800 -+ -+#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE (1 << 0) // 0x0001 -+#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA (1 << 4) // 0x0010 -+#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS (1 << 5) // 0x0020 -+#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY (1 << 6) // 0x0040 -+ -+#define _IPAQ_ASIC3_SDIO_CTRL_Base 0x1200 -+ -+#define IPAQ_ASIC3_SDIO(_b, s,x) \ -+ (*((volatile s *) ((_b) + _IPAQ_ASIC3_SDIO_CTRL_Base + (_IPAQ_ASIC3_SDIO_CTRL_ ## x)))) -+ -+#define _IPAQ_ASIC3_SDIO_CTRL_Cmd 0x00 -+#define _IPAQ_ASIC3_SDIO_CTRL_CardPortSel 0x04 -+#define _IPAQ_ASIC3_SDIO_CTRL_Arg0 0x08 -+#define _IPAQ_ASIC3_SDIO_CTRL_Arg1 0x0C -+#define _IPAQ_ASIC3_SDIO_CTRL_TransferBlockCount 0x14 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response0 0x18 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response1 0x1C -+#define _IPAQ_ASIC3_SDIO_CTRL_Response2 0x20 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response3 0x24 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response4 0x28 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response5 0x2C -+#define _IPAQ_ASIC3_SDIO_CTRL_Response6 0x30 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response7 0x34 -+#define _IPAQ_ASIC3_SDIO_CTRL_CardStatus 0x38 -+#define _IPAQ_ASIC3_SDIO_CTRL_BufferCtrl 0x3C -+#define _IPAQ_ASIC3_SDIO_CTRL_IntMaskCard 0x40 -+#define _IPAQ_ASIC3_SDIO_CTRL_IntMaskBuffer 0x44 -+#define _IPAQ_ASIC3_SDIO_CTRL_CardXferDataLen 0x4C -+#define _IPAQ_ASIC3_SDIO_CTRL_CardOptionSetup 0x50 -+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorStatus0 0x54 -+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorStatus1 0x58 -+#define _IPAQ_ASIC3_SDIO_CTRL_DataPort 0x60 -+#define _IPAQ_ASIC3_SDIO_CTRL_TransactionCtrl 0x68 -+#define _IPAQ_ASIC3_SDIO_CTRL_CardIntCtrl 0x6C -+#define _IPAQ_ASIC3_SDIO_CTRL_ClocknWaitCtrl 0x70 -+#define _IPAQ_ASIC3_SDIO_CTRL_HostInformation 0x74 -+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorCtrl 0x78 -+#define _IPAQ_ASIC3_SDIO_CTRL_LEDCtrl 0x7C -+#define _IPAQ_ASIC3_SDIO_CTRL_SoftwareReset 0x1C0 -+ -+#define IPAQ_ASIC3_SDIO_CTRL_Cmd(_b) IPAQ_ASIC3_SDIO( _b, u16, Cmd ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_CardPortSel(_b) IPAQ_ASIC3_SDIO( _b, u16, CardPortSel ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Arg0(_b) IPAQ_ASIC3_SDIO( _b, u16, Arg0 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Arg1(_b) IPAQ_ASIC3_SDIO( _b, u16, Arg1 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_TransferBlockCount(_b) IPAQ_ASIC3_SDIO( _b, u16, TransferBlockCount ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response0(_b) IPAQ_ASIC3_SDIO( _b, u16, Response0 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response1(_b) IPAQ_ASIC3_SDIO( _b, u16, Response1 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response2(_b) IPAQ_ASIC3_SDIO( _b, u16, Response2 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response3(_b) IPAQ_ASIC3_SDIO( _b, u16, Response3 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response4(_b) IPAQ_ASIC3_SDIO( _b, u16, Response4 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response5(_b) IPAQ_ASIC3_SDIO( _b, u16, Response5 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response6(_b) IPAQ_ASIC3_SDIO( _b, u16, Response6 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response7(_b) IPAQ_ASIC3_SDIO( _b, u16, Response7 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_CardStatus(_b) IPAQ_ASIC3_SDIO( _b, u16, CardStatus ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_BufferCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, BufferCtrl ) /* and error status*/ -+#define IPAQ_ASIC3_SDIO_CTRL_IntMaskCard(_b) IPAQ_ASIC3_SDIO( _b, u16, IntMaskCard ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_IntMaskBuffer(_b) IPAQ_ASIC3_SDIO( _b, u16, IntMaskBuffer ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_CardXferDataLen(_b) IPAQ_ASIC3_SDIO( _b, u16, CardXferDataLen ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_CardOptionSetup(_b) IPAQ_ASIC3_SDIO( _b, u16, CardOptionSetup ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_ErrorStatus0(_b) IPAQ_ASIC3_SDIO( _b, u16, ErrorStatus0 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_ErrorStatus1(_b) IPAQ_ASIC3_SDIO( _b, u16, ErrorStatus1 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_DataPort(_b) IPAQ_ASIC3_SDIO( _b, u16, DataPort ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_TransactionCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, TransactionCtrl ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_CardIntCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, CardIntCtrl ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_ClocknWaitCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, ClocknWaitCtrl ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_HostInformation(_b) IPAQ_ASIC3_SDIO( _b, u16, HostInformation ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_ErrorCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, ErrorCtrl ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_LEDCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, LEDCtrl ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_SoftwareReset(_b) IPAQ_ASIC3_SDIO( _b, u16, SoftwareReset ) /* */ -+ -+#define IPAQ_ASIC3_MAP_SIZE 0x2000 -+ -+#endif -Index: linux-2.6.22/include/linux/backlight.h -=================================================================== ---- linux-2.6.22.orig/include/linux/backlight.h 2007-09-11 12:53:26.000000000 +0200 -+++ linux-2.6.22/include/linux/backlight.h 2007-09-11 12:53:37.000000000 +0200 -@@ -92,4 +92,11 @@ - return dev_get_drvdata(&bl_dev->dev); - } - -+struct generic_bl_info { -+ int max_intensity; -+ int default_intensity; -+ int limit_mask; -+ void (*set_bl_intensity)(int intensity); -+}; -+ - #endif -Index: linux-2.6.22/include/linux/gpiodev.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/linux/gpiodev.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,44 @@ -+#ifndef __GPIODEV_H -+#define __GPIODEV_H -+ -+#include -+#include -+#include -+ -+/* Interface */ -+ -+/* This structure must be first member of device platform_data structure -+ of a device which provides gpiodev interface. All method pointers -+ must be non-NULL, so stubs must be used for non-implemented ones. */ -+struct gpiodev_ops { -+ int (*get)(struct device *this, unsigned gpio_no); -+ void (*set)(struct device *this, unsigned gpio_no, int val); -+ int (*to_irq)(struct device *this, unsigned gpio_no); -+}; -+ -+/* Generalized GPIO structure */ -+ -+struct gpio { -+ struct device *gpio_dev; -+ unsigned gpio_no; -+}; -+ -+/* API functions */ -+ -+static inline int gpiodev_get_value(struct gpio *gpio) -+{ -+ struct gpiodev_ops *ops = gpio->gpio_dev->platform_data; -+ return ops->get(gpio->gpio_dev, gpio->gpio_no); -+} -+static inline void gpiodev_set_value(struct gpio *gpio, int val) -+{ -+ struct gpiodev_ops *ops = gpio->gpio_dev->platform_data; -+ ops->set(gpio->gpio_dev, gpio->gpio_no, val); -+} -+static inline int gpiodev_to_irq(struct gpio *gpio) -+{ -+ struct gpiodev_ops *ops = gpio->gpio_dev->platform_data; -+ return ops->to_irq(gpio->gpio_dev, gpio->gpio_no); -+} -+ -+#endif /* __GPIODEV_H */ -Index: linux-2.6.22/include/linux/input_pda.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/linux/input_pda.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,47 @@ -+#ifndef _INPUT_PDA_H -+#define _INPUT_PDA_H -+ -+/* -+ * This is temporary virtual button key codes map -+ * for keyboardless handheld computers. -+ * Its purpose is to provide map common to all devices -+ * and known to work with current software and its bugs -+ * and misfeatures. Once issues with the software are -+ * solved, codes from input.h will be used directly -+ * (missing key definitions will be added). -+ */ -+ -+/* Some directly usable keycodes: -+KEY_POWER - Power/suspend button -+KEY_ENTER - Enter/Action/Central button on joypad -+KEY_UP -+KEY_DOWN -+KEY_LEFT -+KEY_RIGHT -+*/ -+ -+/* XXX Instead of using any values in include/linux/input.h, we have to use -+ use values < 128 due to some munging that kdrive does to get keystrokes. -+ When kdrive gets its key events from evdev instead of the console, -+ we should be able to switch to using input.h values and get rid of -+ xmodmap. */ -+ -+#define _KEY_APP1 KEY_F9 // xmodmap sees 67 + 8 = 75 -+#define _KEY_APP2 KEY_F10 // xmodmap 76 -+#define _KEY_APP3 KEY_F11 // xmodmap 95 -+#define _KEY_APP4 KEY_F12 // xmodmap 96 -+ -+#define _KEY_RECORD KEY_RO -+ -+/* It is highly recommended to use exactly 4 codes above for -+ 4 buttons the device has. This will ensure that console and -+ framebuffer applications (e.g. games) will work ok on all -+ devices. If you'd like more distinguishable names, following -+ convenience defines are provided, suiting many devices. */ -+ -+#define _KEY_CALENDAR _KEY_APP1 -+#define _KEY_CONTACTS _KEY_APP2 -+#define _KEY_MAIL _KEY_APP3 -+#define _KEY_HOMEPAGE _KEY_APP4 -+ -+#endif -Index: linux-2.6.22/include/linux/soc/asic3_base.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/linux/soc/asic3_base.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,104 @@ -+#include -+#include -+ -+/* Private API - for ASIC3 devices internal use only */ -+#define HDR_IPAQ_ASIC3_ACTION(ACTION,action,fn,FN) \ -+u32 asic3_get_gpio_ ## action ## _ ## fn (struct device *dev); \ -+void asic3_set_gpio_ ## action ## _ ## fn (struct device *dev, u32 bits, u32 val); -+ -+#define HDR_IPAQ_ASIC3_FN(fn,FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( MASK,mask,fn,FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( DIR, dir, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( OUT, out, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( LEVELTRI, trigtype, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( RISING, rising, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( LEVEL, triglevel, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( SLEEP_MASK, sleepmask, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( SLEEP_OUT, sleepout, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( BATT_FAULT_OUT, battfaultout, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( INT_STATUS, intstatus, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( ALT_FUNCTION, alt_fn, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( SLEEP_CONF, sleepconf, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( STATUS, status, fn, FN) -+ -+/* Public API */ -+ -+#define ASIC3_GPIOA_IRQ_BASE 0 -+#define ASIC3_GPIOB_IRQ_BASE 16 -+#define ASIC3_GPIOC_IRQ_BASE 32 -+#define ASIC3_GPIOD_IRQ_BASE 48 -+#define ASIC3_LED0_IRQ 64 -+#define ASIC3_LED1_IRQ 65 -+#define ASIC3_LED2_IRQ 66 -+#define ASIC3_SPI_IRQ 67 -+#define ASIC3_SMBUS_IRQ 68 -+#define ASIC3_OWM_IRQ 69 -+ -+#define ASIC3_NR_GPIO_IRQS 64 /* 16 bits each GPIO A...D banks */ -+#define ASIC3_NR_IRQS (ASIC3_OWM_IRQ + 1) -+ -+extern int asic3_irq_base(struct device *dev); -+ -+extern void asic3_write_register(struct device *dev, unsigned int reg, -+ u32 value); -+extern u32 asic3_read_register(struct device *dev, unsigned int reg); -+ -+/* old clock api */ -+extern void asic3_set_clock_sel(struct device *dev, u32 bits, u32 val); -+extern u32 asic3_get_clock_cdex(struct device *dev); -+extern void asic3_set_clock_cdex(struct device *dev, u32 bits, u32 val); -+ -+extern void asic3_set_extcf_select(struct device *dev, u32 bits, u32 val); -+extern void asic3_set_extcf_reset(struct device *dev, u32 bits, u32 val); -+extern void asic3_set_sdhwctrl(struct device *dev, u32 bits, u32 val); -+ -+extern void asic3_set_led(struct device *dev, int led_num, int duty_time, -+ int cycle_time, int timebase); -+ -+extern int asic3_register_mmc(struct device *dev); -+extern int asic3_unregister_mmc(struct device *dev); -+ -+/* Accessors for GPIO banks */ -+HDR_IPAQ_ASIC3_FN(a, A) -+HDR_IPAQ_ASIC3_FN(b, B) -+HDR_IPAQ_ASIC3_FN(c, C) -+HDR_IPAQ_ASIC3_FN(d, D) -+ -+#define _IPAQ_ASIC3_GPIO_BANK_A 0 -+#define _IPAQ_ASIC3_GPIO_BANK_B 1 -+#define _IPAQ_ASIC3_GPIO_BANK_C 2 -+#define _IPAQ_ASIC3_GPIO_BANK_D 3 -+ -+#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf)) -+ -+extern int asic3_get_gpio_bit(struct device *dev, int gpio); -+extern void asic3_set_gpio_bit(struct device *dev, int gpio, int val); -+extern int asic3_gpio_get_value(struct device *dev, unsigned gpio); -+extern void asic3_gpio_set_value(struct device *dev, unsigned gpio, int val); -+ -+ -+struct tmio_mmc_hwconfig; -+ -+struct asic3_platform_data -+{ -+ // Must be first member -+ struct gpiodev_ops gpiodev_ops; -+ -+ struct { -+ u32 dir; -+ u32 init; -+ u32 sleep_mask; -+ u32 sleep_out; -+ u32 batt_fault_out; -+ u32 sleep_conf; -+ u32 alt_function; -+ } gpio_a, gpio_b, gpio_c, gpio_d; -+ -+ int irq_base; -+ unsigned int bus_shift; -+ -+ struct platform_device **child_platform_devs; -+ int num_child_platform_devs; -+ -+ struct tmio_mmc_hwconfig *tmio_mmc_hwconfig; -+}; -Index: linux-2.6.22/include/linux/soc/tmio_mmc.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/linux/soc/tmio_mmc.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,17 @@ -+#include -+ -+#define MMC_CLOCK_DISABLED 0 -+#define MMC_CLOCK_ENABLED 1 -+ -+#define TMIO_WP_ALWAYS_RW ((void*)-1) -+ -+struct tmio_mmc_hwconfig { -+ void (*hwinit)(struct platform_device *sdev); -+ void (*set_mmc_clock)(struct platform_device *sdev, int state); -+ -+ /* NULL - use ASIC3 signal, -+ TMIO_WP_ALWAYS_RW - assume always R/W (e.g. miniSD) -+ otherwise - machine-specific handler */ -+ int (*mmc_get_ro)(struct platform_device *pdev); -+ short address_shift; -+}; -Index: linux-2.6.22/include/asm-arm/arch-pxa/pxa-regs.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-pxa/pxa-regs.h 2007-09-11 12:53:34.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-pxa/pxa-regs.h 2007-09-11 12:53:37.000000000 +0200 -@@ -2043,6 +2043,8 @@ - #define LDCMD_SOFINT (1 << 22) - #define LDCMD_EOFINT (1 << 21) - -+#define LCCR4_13M_PCD_EN (1<<25) /* 13M PCD enable */ -+#define LCCR4_PCDDIV (1<<31) /* PCD selection */ - - #define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ - #define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ -Index: linux-2.6.22/drivers/mmc/host/Kconfig -=================================================================== ---- linux-2.6.22.orig/drivers/mmc/host/Kconfig 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/mmc/host/Kconfig 2007-09-11 12:53:37.000000000 +0200 -@@ -100,3 +100,9 @@ - To compile this driver as a module, choose M here: the - module will be called tifm_sd. - -+config MMC_ASIC3 -+ tristate "HTC ASIC3 SD/MMC support" -+ depends on MMC && HTC_ASIC3 -+ help -+ This provides support for the ASIC3 SD/MMC controller, used -+ in the iPAQ hx4700 and others. -Index: linux-2.6.22/drivers/mmc/host/Makefile -=================================================================== ---- linux-2.6.22.orig/drivers/mmc/host/Makefile 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/mmc/host/Makefile 2007-09-11 12:53:37.000000000 +0200 -@@ -15,4 +15,4 @@ - obj-$(CONFIG_MMC_OMAP) += omap.o - obj-$(CONFIG_MMC_AT91) += at91_mci.o - obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o -- -+obj-$(CONFIG_MMC_ASIC3) += asic3_mmc.o -Index: linux-2.6.22/drivers/mmc/host/asic3_mmc.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/mmc/host/asic3_mmc.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,900 @@ -+/* Note that this driver can likely be merged into the tmio driver, so -+ * consider this code temporary. It works, though. -+ */ -+/* -+ * linux/drivers/mmc/asic3_mmc.c -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * based on tmio_mmc.c -+ * Copyright (C) 2004 Ian Molton -+ * -+ * Refactored to support all ASIC3 devices, 2006 Paul Sokolovsky -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Driver for the SD / SDIO cell found in: -+ * -+ * TC6393XB -+ * -+ * This driver draws mainly on scattered spec sheets, Reverse engineering -+ * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit -+ * support). -+ * -+ * Supports MMC 1 bit transfers and SD 1 and 4 bit modes. -+ * -+ * TODO: -+ * Eliminate FIXMEs -+ * SDIO support -+ * Power management -+ * Handle MMC errors (at all) -+ * -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+//#include -+#include -+#include -+//#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include "asic3_mmc.h" -+ -+struct asic3_mmc_host { -+ void *ctl_base; -+ struct device *asic3_dev; /* asic3 device */ -+ struct tmio_mmc_hwconfig *hwconfig; /* HW config data/handlers, guaranteed != NULL */ -+ unsigned long bus_shift; -+ struct mmc_command *cmd; -+ struct mmc_request *mrq; -+ struct mmc_data *data; -+ struct mmc_host *mmc; -+ int irq; -+ unsigned short clock_for_sd; -+ -+ /* I/O related stuff */ -+ struct scatterlist *sg_ptr; -+ unsigned int sg_len; -+ unsigned int sg_off; -+}; -+ -+static void -+mmc_finish_request(struct asic3_mmc_host *host) -+{ -+ struct mmc_request *mrq = host->mrq; -+ -+ /* Write something to end the command */ -+ host->mrq = NULL; -+ host->cmd = NULL; -+ host->data = NULL; -+ -+ mmc_request_done(host->mmc, mrq); -+} -+ -+ -+#define ASIC3_MMC_REG(host, block, reg) (*((volatile u16 *) ((host->ctl_base) + ((_IPAQ_ASIC3_## block ## _Base + _IPAQ_ASIC3_ ## block ## _ ## reg) >> (2 - host->bus_shift))) )) -+ -+static void -+mmc_start_command(struct asic3_mmc_host *host, struct mmc_command *cmd) -+{ -+ struct mmc_data *data = host->data; -+ int c = cmd->opcode; -+ -+ DBG("Opcode: %d, base: %p\n", cmd->opcode, host->ctl_base); -+ -+ if(cmd->opcode == MMC_STOP_TRANSMISSION) { -+ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12; -+ cmd->resp[0] = cmd->opcode; -+ cmd->resp[1] = 0; -+ cmd->resp[2] = 0; -+ cmd->resp[3] = 0; -+ cmd->resp[4] = 0; -+ return; -+ } -+ -+ switch(cmd->flags & 0x1f) { -+ case MMC_RSP_NONE: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL; break; -+ case MMC_RSP_R1: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1; break; -+ case MMC_RSP_R1B: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B; break; -+ case MMC_RSP_R2: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2; break; -+ case MMC_RSP_R3: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3; break; -+ default: -+ DBG("Unknown response type %d\n", cmd->flags & 0x1f); -+ break; -+ } -+ -+ host->cmd = cmd; -+ -+ if(cmd->opcode == MMC_APP_CMD) { -+ c |= APP_CMD; -+ } -+ if (cmd->opcode == MMC_GO_IDLE_STATE) { -+ c |= (3 << 8); /* This was removed from ipaq-asic3.h for some reason */ -+ } -+ if(data) { -+ c |= SD_CTRL_COMMAND_DATA_PRESENT; -+ if(data->blocks > 1) { -+ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12; -+ c |= SD_CTRL_COMMAND_MULTI_BLOCK; -+ } -+ if(data->flags & MMC_DATA_READ) { -+ c |= SD_CTRL_COMMAND_TRANSFER_READ; -+ } -+ /* MMC_DATA_WRITE does not require a bit to be set */ -+ } -+ -+ /* Enable the command and data interrupts */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( -+ SD_CTRL_INTMASKCARD_RESPONSE_END -+ | SD_CTRL_INTMASKCARD_RW_END -+ | SD_CTRL_INTMASKCARD_CARD_REMOVED_0 -+ | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 -+#if 0 -+ | SD_CTRL_INTMASKCARD_CARD_REMOVED_3 -+ | SD_CTRL_INTMASKCARD_CARD_INSERTED_3 -+#endif -+ ); -+ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) = ~( -+ SD_CTRL_INTMASKBUFFER_UNK7 -+ | SD_CTRL_INTMASKBUFFER_CMD_BUSY -+#if 0 -+ | SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR -+ | SD_CTRL_INTMASKBUFFER_CRC_ERROR -+ | SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR -+ | SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT -+ | SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW -+ | SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW -+ | SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT -+ | SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE -+ | SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE -+ | SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS -+#endif -+ ); -+ -+ /* Send the command */ -+ ASIC3_MMC_REG(host, SD_CTRL, Arg1) = cmd->arg >> 16; -+ ASIC3_MMC_REG(host, SD_CTRL, Arg0) = cmd->arg & 0xffff; -+ ASIC3_MMC_REG(host, SD_CTRL, Cmd) = c; -+} -+ -+/* This chip always returns (at least?) as much data as you ask for. I'm -+ * unsure what happens if you ask for less than a block. This should be looked -+ * into to ensure that a funny length read doesnt mess up the controller data -+ * state machine. -+ * -+ * Aric: Statement above may not apply to ASIC3. -+ * -+ * FIXME - this chip cannot do 1 and 2 byte data requests in 4 bit mode -+ * -+ * Aric: Statement above may not apply to ASIC3. -+ */ -+ -+static struct tasklet_struct mmc_data_read_tasklet; -+ -+static void -+mmc_data_transfer(unsigned long h) -+{ -+ struct asic3_mmc_host *host = (struct asic3_mmc_host *)h; -+ struct mmc_data *data = host->data; -+ unsigned short *buf; -+ int count; -+ /* unsigned long flags; */ -+ -+ if(!data){ -+ printk(KERN_WARNING DRIVER_NAME ": Spurious Data IRQ\n"); -+ return; -+ } -+ -+ /* local_irq_save(flags); */ -+ /* buf = kmap_atomic(host->sg_ptr->page, KM_BIO_SRC_IRQ); */ -+ buf = kmap(host->sg_ptr->page); -+ buf += host->sg_ptr->offset/2 + host->sg_off/2; -+ -+ /* -+ * Ensure we dont read more than one block. The chip will interrupt us -+ * When the next block is available. -+ */ -+ count = host->sg_ptr->length - host->sg_off; -+ if(count > data->blksz) { -+ count = data->blksz; -+ } -+ -+ DBG("count: %08x, page: %p, offset: %08x flags %08x\n", -+ count, host->sg_ptr->page, host->sg_off, data->flags); -+ -+ host->sg_off += count; -+ -+ /* Transfer the data */ -+ if(data->flags & MMC_DATA_READ) { -+ while(count > 0) { -+ /* Read two bytes from SD/MMC controller. */ -+ *buf = ASIC3_MMC_REG(host, SD_CTRL, DataPort); -+ buf++; -+ count -= 2; -+ } -+ //flush_dcache_page(host->sg_ptr->page); -+ } else { -+ while(count > 0) { -+ /* Write two bytes to SD/MMC controller. */ -+ ASIC3_MMC_REG(host, SD_CTRL, DataPort) = *buf; -+ buf++; -+ count -= 2; -+ } -+ } -+ -+ /* kunmap_atomic(host->sg_ptr->page, KM_BIO_SRC_IRQ); */ -+ kunmap(host->sg_ptr->page); -+ /* local_irq_restore(flags); */ -+ if(host->sg_off == host->sg_ptr->length) { -+ host->sg_ptr++; -+ host->sg_off = 0; -+ --host->sg_len; -+ } -+ -+ return; -+} -+ -+static void -+mmc_data_end_irq(struct asic3_mmc_host *host) -+{ -+ struct mmc_data *data = host->data; -+ -+ host->data = NULL; -+ -+ if(!data){ -+ printk(KERN_WARNING DRIVER_NAME ": Spurious data end IRQ\n"); -+ return; -+ } -+ -+ if (data->error == MMC_ERR_NONE) { -+ data->bytes_xfered = data->blocks * data->blksz; -+ } else { -+ data->bytes_xfered = 0; -+ } -+ -+ DBG("Completed data request\n"); -+ -+ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = 0; -+ -+ /* Make sure read enable interrupt and write enable interrupt are disabled */ -+ if(data->flags & MMC_DATA_READ) { -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) |= SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE; -+ } else { -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) |= SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE; -+ } -+ -+ mmc_finish_request(host); -+} -+ -+static void -+mmc_cmd_irq(struct asic3_mmc_host *host, unsigned int buffer_stat) -+{ -+ struct mmc_command *cmd = host->cmd; -+ u8 *buf = (u8 *)cmd->resp; -+ u16 data; -+ -+ if(!host->cmd) { -+ printk(KERN_WARNING DRIVER_NAME ": Spurious CMD irq\n"); -+ return; -+ } -+ -+ host->cmd = NULL; -+ if(cmd->flags & MMC_RSP_PRESENT && cmd->flags & MMC_RSP_136) { -+ /* R2 */ -+ buf[12] = 0xff; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response0); -+ buf[13] = data & 0xff; -+ buf[14] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response1); -+ buf[15] = data & 0xff; -+ buf[8] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response2); -+ buf[9] = data & 0xff; -+ buf[10] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response3); -+ buf[11] = data & 0xff; -+ buf[4] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response4); -+ buf[5] = data & 0xff; -+ buf[6] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response5); -+ buf[7] = data & 0xff; -+ buf[0] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response6); -+ buf[1] = data & 0xff; -+ buf[2] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response7); -+ buf[3] = data & 0xff; -+ } else if(cmd->flags & MMC_RSP_PRESENT) { -+ /* R1, R1B, R3 */ -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response0); -+ buf[0] = data & 0xff; -+ buf[1] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response1); -+ buf[2] = data & 0xff; -+ buf[3] = data >> 8; -+ } -+ DBG("Response: %08x %08x %08x %08x\n", cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); -+ -+ if(buffer_stat & SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT) { -+ cmd->error = MMC_ERR_TIMEOUT; -+ } else if((buffer_stat & SD_CTRL_BUFFERSTATUS_CRC_ERROR) && (cmd->flags & MMC_RSP_CRC)) { -+ cmd->error = MMC_ERR_BADCRC; -+ } else if(buffer_stat & -+ ( -+ SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS -+ | SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR -+ | SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR -+ | SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW -+ | SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW -+ | SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT -+ ) -+ ) { -+ DBG("Buffer status ERROR 0x%04x - inside check buffer\n", buffer_stat); -+ DBG("detail0 error status 0x%04x\n", ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus0)); -+ DBG("detail1 error status 0x%04x\n", ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus1)); -+ cmd->error = MMC_ERR_FAILED; -+ } -+ -+ if(cmd->error == MMC_ERR_NONE) { -+ switch (cmd->opcode) { -+ case SD_APP_SET_BUS_WIDTH: -+ if(cmd->arg == SD_BUS_WIDTH_4) { -+ host->clock_for_sd = SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD; -+ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = -+ MEM_CARD_OPTION_REQUIRED -+ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) -+ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT -+ | MEM_CARD_OPTION_DATA_XFR_WIDTH_4; -+ } else { -+ host->clock_for_sd = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = -+ MEM_CARD_OPTION_REQUIRED -+ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) -+ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT -+ | MEM_CARD_OPTION_DATA_XFR_WIDTH_1; -+ } -+ break; -+ case MMC_SELECT_CARD: -+ if((cmd->arg >> 16) == 0) { -+ /* We have been deselected. */ -+ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = -+ MEM_CARD_OPTION_REQUIRED -+ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) -+ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT -+ | MEM_CARD_OPTION_DATA_XFR_WIDTH_1; -+ } -+ } -+ } -+ -+ /* -+ * If there is data to handle we enable data IRQs here, and we will -+ * ultimatley finish the request in the mmc_data_end_irq handler. -+ */ -+ if(host->data && (cmd->error == MMC_ERR_NONE)){ -+ if(host->data->flags & MMC_DATA_READ) { -+ /* Enable the read enable interrupt */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= -+ ~SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE; -+ } else { -+ /* Enable the write enable interrupt */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= -+ ~SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE; -+ } -+ } else { -+ /* There's no data, or we encountered an error, so finish now. */ -+ mmc_finish_request(host); -+ } -+ -+ return; -+} -+ -+static void hwinit2_irqsafe(struct asic3_mmc_host *host); -+ -+static irqreturn_t -+mmc_irq(int irq, void *irq_desc) -+{ -+ struct asic3_mmc_host *host; -+ unsigned int breg, bmask, bstatus, creg, cmask, cstatus; -+ -+ host = irq_desc; -+ -+ /* asic3 bstatus has errors */ -+ bstatus = ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl); -+ bmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer); -+ cstatus = ASIC3_MMC_REG(host, SD_CTRL, CardStatus); -+ cmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard); -+ breg = bstatus & ~bmask & ~DONT_CARE_BUFFER_BITS; -+ creg = cstatus & ~cmask & ~DONT_CARE_CARD_BITS; -+ -+ if (!breg && !creg) { -+ /* This occurs sometimes for no known reason. It doesn't hurt -+ * anything, so I don't print it. */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= ~breg; -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) &= ~creg; -+ goto out; -+ } -+ -+ while (breg || creg) { -+ -+ /* XXX TODO: Need to handle errors in breg here. */ -+ -+ /* -+ * Card insert/remove. The mmc controlling code is stateless. That -+ * is, it doesn't care if it was an insert or a remove. It treats -+ * both the same. -+ */ -+ /* XXX Asic3 has _3 versions of these status bits, too, for a second slot, perhaps? */ -+ if (creg & (SD_CTRL_CARDSTATUS_CARD_INSERTED_0 | SD_CTRL_CARDSTATUS_CARD_REMOVED_0)) { -+ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= -+ ~(SD_CTRL_CARDSTATUS_CARD_REMOVED_0 | SD_CTRL_CARDSTATUS_CARD_INSERTED_0); -+ if(creg & SD_CTRL_CARDSTATUS_CARD_INSERTED_0) { -+ hwinit2_irqsafe(host); -+ } -+ mmc_detect_change(host->mmc,1); -+ } -+ -+ /* Command completion */ -+ if (creg & SD_CTRL_CARDSTATUS_RESPONSE_END) { -+ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= -+ ~(SD_CTRL_CARDSTATUS_RESPONSE_END); -+ mmc_cmd_irq(host, bstatus); -+ } -+ -+ /* Data transfer */ -+ if (breg & (SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE | SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE)) { -+ ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) &= -+ ~(SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE | SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE); -+ tasklet_schedule(&mmc_data_read_tasklet); -+ } -+ -+ /* Data transfer completion */ -+ if (creg & SD_CTRL_CARDSTATUS_RW_END) { -+ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= ~(SD_CTRL_CARDSTATUS_RW_END); -+ mmc_data_end_irq(host); -+ } -+ -+ /* Check status - keep going until we've handled it all */ -+ bstatus = ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl); -+ bmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer); -+ cstatus = ASIC3_MMC_REG(host, SD_CTRL, CardStatus); -+ cmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard); -+ breg = bstatus & ~bmask & ~DONT_CARE_BUFFER_BITS; -+ creg = cstatus & ~cmask & ~DONT_CARE_CARD_BITS; -+ } -+ -+out: -+ /* Ensure all interrupt sources are cleared */ -+ ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) = 0; -+ return IRQ_HANDLED; -+} -+ -+static void -+mmc_start_data(struct asic3_mmc_host *host, struct mmc_data *data) -+{ -+ DBG("setup data transfer: blocksize %08x nr_blocks %d, page: %08x, offset: %08x\n", data->blksz, -+ data->blocks, (int)data->sg->page, data->sg->offset); -+ -+ host->sg_len = data->sg_len; -+ host->sg_ptr = data->sg; -+ host->sg_off = 0; -+ host->data = data; -+ -+ /* Set transfer length and blocksize */ -+ ASIC3_MMC_REG(host, SD_CTRL, TransferSectorCount) = data->blocks; -+ ASIC3_MMC_REG(host, SD_CTRL, MemCardXferDataLen) = data->blksz; -+} -+ -+/* Process requests from the MMC layer */ -+static void -+mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) -+{ -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ -+ WARN_ON(host->mrq != NULL); -+ -+ host->mrq = mrq; -+ -+ /* If we're performing a data request we need to setup some -+ extra information */ -+ if(mrq->data) { -+ mmc_start_data(host, mrq->data); -+ } -+ -+ mmc_start_command(host, mrq->cmd); -+} -+ -+/* Set MMC clock / power. -+ * Note: This controller uses a simple divider scheme therefore it cannot run -+ * a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as MMC -+ * wont run that fast, it has to be clocked at 12MHz which is the next slowest -+ * setting. This is likely not an issue because we are doing single 16-bit -+ * writes for data I/O. -+ */ -+static void -+mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -+{ -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ u32 clk = 0; -+ -+ DBG("clock %uHz busmode %u powermode %u Vdd %u\n", -+ ios->clock, ios->bus_mode, ios->power_mode, ios->vdd); -+ -+ if (ios->clock) { -+ clk = 0x80; /* slowest by default */ -+ if(ios->clock >= 24000000 / 256) clk >>= 1; -+ if(ios->clock >= 24000000 / 128) clk >>= 1; -+ if(ios->clock >= 24000000 / 64) clk >>= 1; -+ if(ios->clock >= 24000000 / 32) clk >>= 1; -+ if(ios->clock >= 24000000 / 16) clk >>= 1; -+ if(ios->clock >= 24000000 / 8) clk >>= 1; -+ if(ios->clock >= 24000000 / 4) clk >>= 1; -+ if(ios->clock >= 24000000 / 2) clk >>= 1; -+ if(ios->clock >= 24000000 / 1) clk >>= 1; -+ if(clk == 0) { /* For fastest speed we disable the divider. */ -+ ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 0; -+ } else { -+ ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 1; -+ } -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = -+ host->clock_for_sd -+ | SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK -+ | clk; -+ msleep(10); -+ } else { -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; -+ } -+ -+ switch (ios->power_mode) { -+ case MMC_POWER_OFF: -+ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = 0; -+ msleep(1); -+ break; -+ case MMC_POWER_UP: -+ break; -+ case MMC_POWER_ON: -+ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = SD_CONFIG_POWER1_PC_33V; -+ msleep(20); -+ break; -+ } -+} -+ -+static int -+mmc_get_ro(struct mmc_host *mmc) -+{ -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ -+ /* Call custom handler for RO status */ -+ if(host->hwconfig->mmc_get_ro) { -+ /* Special case for cards w/o WP lock (like miniSD) */ -+ if (host->hwconfig->mmc_get_ro == (void*)-1) { -+ return 0; -+ } else { -+ struct platform_device *pdev = to_platform_device(mmc_dev(mmc)); -+ return host->hwconfig->mmc_get_ro(pdev); -+ } -+ } -+ -+ /* WRITE_PROTECT is active low */ -+ return (ASIC3_MMC_REG(host, SD_CTRL, CardStatus) & SD_CTRL_CARDSTATUS_WRITE_PROTECT)?0:1; -+} -+ -+static struct mmc_host_ops mmc_ops = { -+ .request = mmc_request, -+ .set_ios = mmc_set_ios, -+ .get_ro = mmc_get_ro, -+}; -+ -+static void -+hwinit2_irqsafe(struct asic3_mmc_host *host) -+{ -+ ASIC3_MMC_REG(host, SD_CONFIG, Addr1) = 0x0000; -+ ASIC3_MMC_REG(host, SD_CONFIG, Addr0) = 0x0800; -+ -+ ASIC3_MMC_REG(host, SD_CONFIG, ClkStop) = SD_CONFIG_CLKSTOP_ENABLE_ALL; -+ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_CardDetect) = 2; -+ ASIC3_MMC_REG(host, SD_CONFIG, Command) = SD_CONFIG_COMMAND_MAE; -+ -+ ASIC3_MMC_REG(host, SD_CTRL, SoftwareReset) = 0; /* reset on */ -+ mdelay(2); -+ -+ ASIC3_MMC_REG(host, SD_CTRL, SoftwareReset) = 1; /* reset off */ -+ mdelay(2); -+ -+ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = -+ MEM_CARD_OPTION_REQUIRED -+ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) -+ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT -+ | MEM_CARD_OPTION_DATA_XFR_WIDTH_1 -+ ; -+ host->clock_for_sd = 0; -+ -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus0) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus1) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = 0; -+ -+ ASIC3_MMC_REG(host, SDIO_CTRL, ClocknWaitCtrl) = 0x100; -+ /* *((unsigned short *)(((char *)host->ctl_base) + 0x938)) = 0x100; */ -+ -+ ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; -+ -+ mdelay(1); -+ -+ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( -+ SD_CTRL_INTMASKCARD_RESPONSE_END -+ | SD_CTRL_INTMASKCARD_RW_END -+ | SD_CTRL_INTMASKCARD_CARD_REMOVED_0 -+ | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 -+#if 0 -+ | SD_CTRL_INTMASKCARD_CARD_REMOVED_3 -+ | SD_CTRL_INTMASKCARD_CARD_INSERTED_3 -+#endif -+ ) -+ ; /* check */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) = 0xffff; /* IRQs off */ -+ -+ /* -+ * ASIC3_MMC_REG(host, SD_CTRL, TransactionCtrl) = SD_CTRL_TRANSACTIONCONTROL_SET; -+ * Wince has 0x1000 -+ */ -+ /* ASIC3_MMC_REG(host, SD_CTRL, TransactionCtrl) = 0x1000; */ -+ -+ -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SDPWR, ASIC3_SDHWCTRL_SDPWR); /* turn on power at controller(?) */ -+ -+} -+ -+static void -+hwinit(struct asic3_mmc_host *host, struct platform_device *pdev) -+{ -+ /* Call custom handler for enabling clock (if needed) */ -+ if(host->hwconfig->set_mmc_clock) -+ host->hwconfig->set_mmc_clock(pdev, MMC_CLOCK_ENABLED); -+ -+ /* Not sure if it must be done bit by bit, but leaving as-is */ -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_LEVCD, ASIC3_SDHWCTRL_LEVCD); -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_LEVWP, ASIC3_SDHWCTRL_LEVWP); -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, 0); -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_PCLR, 0); -+ -+ asic3_set_clock_cdex (host->asic3_dev, -+ CLOCK_CDEX_EX1 | CLOCK_CDEX_EX0, CLOCK_CDEX_EX1 | CLOCK_CDEX_EX0); -+ msleep(1); -+ -+ asic3_set_clock_sel (host->asic3_dev, -+ CLOCK_SEL_SD_HCLK_SEL | CLOCK_SEL_SD_BCLK_SEL, -+ CLOCK_SEL_SD_HCLK_SEL | 0); /* ? */ -+ -+ asic3_set_clock_cdex (host->asic3_dev, -+ CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS, -+ CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS); -+ msleep(1); -+ -+ asic3_set_extcf_select(host->asic3_dev, ASIC3_EXTCF_SD_MEM_ENABLE, ASIC3_EXTCF_SD_MEM_ENABLE); -+ -+ /* Long Delay */ -+ if( !machine_is_h4700()) -+ msleep(500); -+ -+ hwinit2_irqsafe(host); -+} -+ -+#ifdef CONFIG_PM -+static int -+mmc_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(pdev); -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ int ret; -+ -+ ret = mmc_suspend_host(mmc, state); -+ -+ if (ret) { -+ printk(KERN_ERR DRIVER_NAME ": Could not suspend MMC host, hardware not suspended"); -+ return ret; -+ } -+ -+ /* disable the card insert / remove interrupt while sleeping */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( -+ SD_CTRL_INTMASKCARD_RESPONSE_END -+ | SD_CTRL_INTMASKCARD_RW_END); -+ -+ /* disable clock */ -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; -+ ASIC3_MMC_REG(host, SD_CONFIG, ClkStop) = 0; -+ -+ /* power down */ -+ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = 0; -+ -+ asic3_set_clock_cdex (host->asic3_dev, -+ CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS, 0); -+ -+ /* disable core clock */ -+ if(host->hwconfig->set_mmc_clock) -+ host->hwconfig->set_mmc_clock(pdev, MMC_CLOCK_DISABLED); -+ -+ /* Put in suspend mode */ -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, ASIC3_SDHWCTRL_SUSPEND); -+ return 0; -+} -+ -+static int -+mmc_resume(struct platform_device *pdev) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(pdev); -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ -+ printk(KERN_INFO "%s: starting resume\n", DRIVER_NAME); -+ -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, 0); -+ hwinit(host, pdev); -+ -+ /* re-enable card remove / insert interrupt */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( -+ SD_CTRL_INTMASKCARD_RESPONSE_END -+ | SD_CTRL_INTMASKCARD_RW_END -+ | SD_CTRL_INTMASKCARD_CARD_REMOVED_0 -+ | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 ); -+ -+ mmc_resume_host(mmc); -+ -+ printk(KERN_INFO "%s: finished resume\n", DRIVER_NAME); -+ return 0; -+} -+#endif -+ -+static int -+mmc_probe(struct platform_device *pdev) -+{ -+ struct mmc_host *mmc; -+ struct asic3_mmc_host *host = NULL; -+ int retval = 0; -+ struct tmio_mmc_hwconfig *mmc_config = (struct tmio_mmc_hwconfig *)pdev->dev.platform_data; -+ -+ /* bus_shift is mandatory */ -+ if (!mmc_config) { -+ printk(KERN_ERR DRIVER_NAME ": Invalid configuration\n"); -+ return -EINVAL; -+ } -+ -+ mmc = mmc_alloc_host(sizeof(struct asic3_mmc_host) + 128, &pdev->dev); -+ if (!mmc) { -+ retval = -ENOMEM; -+ goto exceptional_return; -+ } -+ -+ host = mmc_priv(mmc); -+ host->mmc = mmc; -+ platform_set_drvdata(pdev, mmc); -+ -+ host->ctl_base = 0; -+ host->hwconfig = mmc_config; -+ host->bus_shift = mmc_config->address_shift; -+ host->asic3_dev = pdev->dev.parent; -+ host->clock_for_sd = 0; -+ -+ tasklet_init(&mmc_data_read_tasklet, mmc_data_transfer, (unsigned long)host); -+ -+ host->ctl_base = ioremap_nocache ((unsigned long)pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start); -+ if(!host->ctl_base){ -+ printk(KERN_ERR DRIVER_NAME ": Could not map ASIC3 SD controller\n"); -+ retval = -ENODEV; -+ goto exceptional_return; -+ } -+ -+ printk(DRIVER_NAME ": ASIC3 MMC/SD Driver, controller at 0x%lx\n", (unsigned long)pdev->resource[0].start); -+ -+ mmc->ops = &mmc_ops; -+ mmc->caps = MMC_CAP_4_BIT_DATA; -+ mmc->f_min = 46875; /* ARIC: not sure what these should be */ -+ mmc->f_max = 24000000; /* ARIC: not sure what these should be */ -+ mmc->ocr_avail = MMC_VDD_32_33; -+ -+ hwinit(host, pdev); -+ -+ -+ host->irq = pdev->resource[1].start; -+ -+ retval = request_irq(host->irq, mmc_irq, 0, DRIVER_NAME, host); -+ if(retval) { -+ printk(KERN_ERR DRIVER_NAME ": Unable to get interrupt\n"); -+ retval = -ENODEV; -+ goto exceptional_return; -+ } -+ set_irq_type(host->irq, IRQT_FALLING); -+ -+ mmc_add_host(mmc); -+ -+#ifdef CONFIG_PM -+ // resume_timer.function = resume_timer_callback; -+ // resume_timer.data = 0; -+ // init_timer(&resume_timer); -+#endif -+ -+ return 0; -+ -+exceptional_return: -+ if (mmc) { -+ mmc_free_host(mmc); -+ } -+ if(host && host->ctl_base) iounmap(host->ctl_base); -+ return retval; -+} -+ -+static int -+mmc_remove(struct platform_device *pdev) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(pdev); -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ if (mmc) { -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ mmc_remove_host(mmc); -+ free_irq(host->irq, host); -+ /* FIXME - we might want to consider stopping the chip here... */ -+ iounmap(host->ctl_base); -+ mmc_free_host(mmc); /* FIXME - why does this call hang? */ -+ } -+ return 0; -+} -+ -+/* ------------------- device registration ----------------------- */ -+ -+static struct platform_driver mmc_asic3_driver = { -+ .driver = { -+ .name = DRIVER_NAME, -+ }, -+ .probe = mmc_probe, -+ .remove = mmc_remove, -+#ifdef CONFIG_PM -+ .suspend = mmc_suspend, -+ .resume = mmc_resume, -+#endif -+}; -+ -+static int __init mmc_init(void) -+{ -+ return platform_driver_register(&mmc_asic3_driver); -+} -+ -+static void __exit mmc_exit(void) -+{ -+ platform_driver_unregister(&mmc_asic3_driver); -+} -+ -+late_initcall(mmc_init); -+module_exit(mmc_exit); -+ -+MODULE_DESCRIPTION("HTC ASIC3 SD/MMC driver"); -+MODULE_AUTHOR("Aric Blumer, SDG Systems, LLC"); -+MODULE_LICENSE("GPL"); -+ -Index: linux-2.6.22/drivers/mmc/host/asic3_mmc.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/mmc/host/asic3_mmc.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,25 @@ -+#ifndef __ASIC3_MMC_H -+#define __ASIC3_MMC_H -+ -+#define DRIVER_NAME "asic3_mmc" -+ -+#ifdef CONFIG_MMC_DEBUG -+#define DBG(x...) printk(DRIVER_NAME ": " x) -+#else -+#define DBG(x...) do { } while (0) -+#endif -+ -+/* Response types */ -+#define APP_CMD 0x0040 -+ -+#define SD_CONFIG_CLKSTOP_ENABLE_ALL 0x1f -+ -+#define DONT_CARE_CARD_BITS ( \ -+ SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 \ -+ | SD_CTRL_INTMASKCARD_WRITE_PROTECT \ -+ | SD_CTRL_INTMASKCARD_UNK6 \ -+ | SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 \ -+ ) -+#define DONT_CARE_BUFFER_BITS ( SD_CTRL_INTMASKBUFFER_UNK7 | SD_CTRL_INTMASKBUFFER_CMD_BUSY ) -+ -+#endif // __ASIC3_MMC_H -Index: linux-2.6.22/drivers/input/keyboard/Makefile -=================================================================== ---- linux-2.6.22.orig/drivers/input/keyboard/Makefile 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/input/keyboard/Makefile 2007-09-11 12:53:37.000000000 +0200 -@@ -21,4 +21,4 @@ - obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keyboard.o - obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o - obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o -- -+obj-$(CONFIG_KEYBOARD_ASIC3) += asic3_keys.o -Index: linux-2.6.22/drivers/input/keyboard/asic3_keys.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/input/keyboard/asic3_keys.c 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,131 @@ -+/* -+ * Generic buttons driver for ASIC3 SoC. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * Copyright (C) 2003 Joshua Wise -+ * Copyright (C) 2005 Pawel Kolodziejski -+ * Copyright (C) 2006 Paul Sokolovsky -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static irqreturn_t asic3_keys_asic_handle(int irq, void *data) -+{ -+ struct asic3_keys_platform_data *pdata = data; -+ int i, base_irq; -+ -+ base_irq = asic3_irq_base(pdata->asic3_dev); -+ for (i = 0; i < pdata->nbuttons; i++) { -+ struct asic3_keys_button *b = &pdata->buttons[i]; -+ if ((base_irq + b->gpio) == irq) { -+ int state = !!asic3_gpio_get_value(pdata->asic3_dev, b->gpio); -+ -+ if (pdata->buttons[i].type == EV_SW) -+ input_report_switch(pdata->input, pdata->buttons[i].keycode, state ^ b->active_low); -+ else -+ input_report_key(pdata->input, b->keycode, state ^ b->active_low); -+ input_sync(pdata->input); -+ } -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static int __devinit asic3_keys_probe(struct platform_device *pdev) -+{ -+ struct asic3_keys_platform_data *pdata = pdev->dev.platform_data; -+ int i, base_irq; -+ int j, ret; -+ -+ pdata->input = input_allocate_device(); -+ -+ base_irq = asic3_irq_base(pdata->asic3_dev); -+ -+ for (i = 0; i < pdata->nbuttons; i++) { -+ struct asic3_keys_button *b = &pdata->buttons[i]; -+ set_bit(b->keycode, pdata->input->keybit); -+ ret=request_irq(base_irq + b->gpio, asic3_keys_asic_handle, SA_SAMPLE_RANDOM, b->desc, pdata); -+ if (ret) -+ { -+ printk(KERN_NOTICE "Failed to allocate asic3_keys irq=%d.\n",b->gpio); -+ -+ for(j=0; jbuttons[i].gpio, NULL); -+ -+ input_unregister_device (pdata->input); -+ -+ return -ENODEV; -+ } -+ -+ set_irq_type(base_irq + b->gpio, IRQT_BOTHEDGE); -+ if (pdata->buttons[i].type == EV_SW) { -+ pdata->input->evbit[0] |= BIT(EV_SW); -+ set_bit(b->keycode, pdata->input->swbit); -+ } else { -+ pdata->input->evbit[0] |= BIT(EV_KEY); -+ set_bit(b->keycode, pdata->input->keybit); -+ } -+ } -+ -+ pdata->input->name = pdev->name; -+ input_register_device(pdata->input); -+ -+ return 0; -+} -+ -+static int __devexit asic3_keys_remove(struct platform_device *pdev) -+{ -+ struct asic3_keys_platform_data *pdata = pdev->dev.platform_data; -+ int i, base_irq; -+ -+ base_irq = asic3_irq_base(pdata->asic3_dev); -+ for (i = 0; i < pdata->nbuttons; i++) { -+ free_irq(base_irq + pdata->buttons[i].gpio, NULL); -+ } -+ -+ input_unregister_device(pdata->input); -+ -+ return 0; -+} -+ -+ -+static struct platform_driver asic3_keys_driver = { -+ .probe = asic3_keys_probe, -+ .remove = __devexit_p(asic3_keys_remove), -+ .driver = { -+ .name = "asic3-keys", -+ }, -+}; -+ -+static int __init asic3_keys_init(void) -+{ -+ return platform_driver_register(&asic3_keys_driver); -+} -+ -+static void __exit asic3_keys_exit(void) -+{ -+ platform_driver_unregister(&asic3_keys_driver); -+} -+ -+module_init(asic3_keys_init); -+module_exit(asic3_keys_exit); -+ -+MODULE_AUTHOR("Joshua Wise, Pawel Kolodziejski, Paul Sokolovsky"); -+MODULE_DESCRIPTION("Buttons driver for HTC ASIC3 SoC"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.22/include/asm-arm/arch-pxa/irqs.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-pxa/irqs.h 2007-09-11 12:53:24.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-pxa/irqs.h 2007-09-11 12:53:37.000000000 +0200 -@@ -172,6 +172,8 @@ - defined(CONFIG_MACH_LOGICPD_PXA270) || \ - defined(CONFIG_MACH_MAINSTONE) - #define NR_IRQS (IRQ_BOARD_END) -+#elif defined(CONFIG_MACH_HTCUNIVERSAL) -+#define NR_IRQS (IRQ_BOARD_START + 96) - #else - #define NR_IRQS (IRQ_BOARD_START) - #endif -Index: linux-2.6.22/include/linux/ioport.h -=================================================================== ---- linux-2.6.22.orig/include/linux/ioport.h 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/include/linux/ioport.h 2007-09-11 12:53:37.000000000 +0200 -@@ -56,6 +56,7 @@ - #define IORESOURCE_IRQ_HIGHLEVEL (1<<2) - #define IORESOURCE_IRQ_LOWLEVEL (1<<3) - #define IORESOURCE_IRQ_SHAREABLE (1<<4) -+#define IORESOURCE_IRQ_SOC_SUBDEVICE (1<<5) - - /* ISA PnP DMA specific bits (IORESOURCE_BITS) */ - #define IORESOURCE_DMA_TYPE_MASK (3<<0) -Index: linux-2.6.22/drivers/video/backlight/Kconfig -=================================================================== ---- linux-2.6.22.orig/drivers/video/backlight/Kconfig 2007-09-11 12:53:30.000000000 +0200 -+++ linux-2.6.22/drivers/video/backlight/Kconfig 2007-09-11 12:53:37.000000000 +0200 -@@ -40,7 +40,7 @@ - - config BACKLIGHT_CORGI - tristate "Sharp Corgi Backlight Driver (SL Series)" -- depends on BACKLIGHT_CLASS_DEVICE && PXA_SHARPSL -+ depends on BACKLIGHT_CLASS_DEVICE - default y - help - If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y to enable the -Index: linux-2.6.22/drivers/video/backlight/corgi_bl.c -=================================================================== ---- linux-2.6.22.orig/drivers/video/backlight/corgi_bl.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/video/backlight/corgi_bl.c 2007-09-11 12:53:37.000000000 +0200 -@@ -24,7 +24,7 @@ - static int corgibl_intensity; - static struct backlight_properties corgibl_data; - static struct backlight_device *corgi_backlight_device; --static struct corgibl_machinfo *bl_machinfo; -+static struct generic_bl_info *bl_machinfo; - - static unsigned long corgibl_flags; - #define CORGIBL_SUSPENDED 0x01 -@@ -107,7 +107,7 @@ - - static int corgibl_probe(struct platform_device *pdev) - { -- struct corgibl_machinfo *machinfo = pdev->dev.platform_data; -+ struct generic_bl_info *machinfo = pdev->dev.platform_data; - - bl_machinfo = machinfo; - if (!machinfo->limit_mask) -Index: linux-2.6.22/arch/arm/mach-pxa/corgi.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/corgi.c 2007-09-11 12:53:32.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/corgi.c 2007-09-11 12:53:37.000000000 +0200 -@@ -20,6 +20,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -143,7 +144,7 @@ - /* - * Corgi Backlight Device - */ --static struct corgibl_machinfo corgi_bl_machinfo = { -+static struct generic_bl_info corgi_bl_machinfo = { - .max_intensity = 0x2f, - .default_intensity = 0x1f, - .limit_mask = 0x0b, -Index: linux-2.6.22/arch/arm/mach-pxa/spitz.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/spitz.c 2007-09-11 12:53:33.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/spitz.c 2007-09-11 12:53:37.000000000 +0200 -@@ -222,7 +222,7 @@ - /* - * Spitz Backlight Device - */ --static struct corgibl_machinfo spitz_bl_machinfo = { -+static struct generic_bl_info spitz_bl_machinfo = { - .default_intensity = 0x1f, - .limit_mask = 0x0b, - .max_intensity = 0x2f, -Index: linux-2.6.22/include/asm-arm/arch-pxa/serial.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/serial.h 2007-09-11 12:53:37.000000000 +0200 -@@ -0,0 +1,78 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/serial.h -+ * -+ * Author: Nicolas Pitre -+ * Copyright: (C) 2001 MontaVista Software Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+ -+#define BAUD_BASE 921600 -+ -+/* Standard COM flags */ -+#define STD_COM_FLAGS (ASYNC_SKIP_TEST) -+ -+#define STD_SERIAL_PORT_DEFNS \ -+ { \ -+ type: PORT_PXA, \ -+ xmit_fifo_size: 64, \ -+ baud_base: BAUD_BASE, \ -+ iomem_base: &FFUART, \ -+ iomem_reg_shift: 2, \ -+ io_type: SERIAL_IO_MEM, \ -+ irq: IRQ_FFUART, \ -+ flags: STD_COM_FLAGS, \ -+ }, { \ -+ type: PORT_PXA, \ -+ xmit_fifo_size: 64, \ -+ baud_base: BAUD_BASE, \ -+ iomem_base: &STUART, \ -+ iomem_reg_shift: 2, \ -+ io_type: SERIAL_IO_MEM, \ -+ irq: IRQ_STUART, \ -+ flags: STD_COM_FLAGS, \ -+ }, { \ -+ type: PORT_PXA, \ -+ xmit_fifo_size: 64, \ -+ baud_base: BAUD_BASE, \ -+ iomem_base: &BTUART, \ -+ iomem_reg_shift: 2, \ -+ io_type: SERIAL_IO_MEM, \ -+ irq: IRQ_BTUART, \ -+ flags: STD_COM_FLAGS, \ -+ } -+ -+#define EXTRA_SERIAL_PORT_DEFNS -+ -+struct platform_pxa_serial_funcs { -+ -+ /* Initialize whatever is connected to this serial port. */ -+ void (*configure)(int state); -+#define PXA_UART_CFG_PRE_STARTUP 0 -+#define PXA_UART_CFG_POST_STARTUP 1 -+#define PXA_UART_CFG_PRE_SHUTDOWN 2 -+#define PXA_UART_CFG_POST_SHUTDOWN 3 -+ -+ /* Enable or disable the individual transmitter/receiver submodules. -+ * On transceivers without echo cancellation (e.g. SIR) -+ * transmitter always has priority; e.g. if both bits are set, -+ * only the transmitter is enabled. */ -+ void (*set_txrx)(int txrx); -+#define PXA_SERIAL_TX 1 -+#define PXA_SERIAL_RX 2 -+ -+ /* Get the current state of tx/rx. */ -+ int (*get_txrx)(void); -+ -+ int (*suspend)(struct platform_device *dev, pm_message_t state); -+ int (*resume)(struct platform_device *dev); -+}; -+ -+void pxa_set_ffuart_info(struct platform_pxa_serial_funcs *ffuart_funcs); -+void pxa_set_btuart_info(struct platform_pxa_serial_funcs *btuart_funcs); -+void pxa_set_stuart_info(struct platform_pxa_serial_funcs *stuart_funcs); -+void pxa_set_hwuart_info(struct platform_pxa_serial_funcs *hwuart_funcs); -Index: linux-2.6.22/drivers/serial/pxa.c -=================================================================== ---- linux-2.6.22.orig/drivers/serial/pxa.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/serial/pxa.c 2007-09-11 12:53:37.000000000 +0200 -@@ -46,6 +46,7 @@ - #include - #include - #include -+#include - #include - - -@@ -59,6 +60,14 @@ - char *name; - }; - -+ -+#define IS_METHOD(dev, method) (dev && (dev)->platform_data && ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method) -+#define METHOD_CALL(dev, method) \ -+ ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method() -+#define SAFE_METHOD_CALL(dev, method, args...) \ -+ if (IS_METHOD(dev, method)) \ -+ ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method(args) -+ - static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) - { - offset <<= 2; -@@ -346,6 +355,9 @@ - unsigned long flags; - int retval; - -+ /* Perform platform-specific port initialization, if needed. */ -+ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_PRE_STARTUP); -+ - if (port->line == 3) /* HWUART */ - up->mcr |= UART_MCR_AFE; - else -@@ -401,6 +413,12 @@ - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - -+ /* -+ * Perform platform-specific port initialization if needed -+ */ -+ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_POST_STARTUP); -+ SAFE_METHOD_CALL(port->dev, set_txrx, PXA_SERIAL_RX); -+ - return 0; - } - -@@ -409,6 +427,8 @@ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; - -+ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_PRE_SHUTDOWN); -+ - free_irq(up->port.irq, up); - - /* -@@ -430,6 +450,8 @@ - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); -+ -+ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_POST_SHUTDOWN); - } - - static void -Index: linux-2.6.22/arch/arm/mach-pxa/generic.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/generic.c 2007-09-11 12:53:11.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/generic.c 2007-09-11 12:53:37.000000000 +0200 -@@ -42,6 +42,7 @@ - #include - #include - #include -+#include - - #include "devices.h" - #include "generic.h" -@@ -346,6 +347,18 @@ - .id = 3, - }; - -+void __init pxa_set_ffuart_info(struct platform_pxa_serial_funcs *info) -+{ -+ pxa_device_ffuart.dev.platform_data = info; -+} -+EXPORT_SYMBOL(pxa_set_ffuart_info); -+ -+void __init pxa_set_btuart_info(struct platform_pxa_serial_funcs *info) -+{ -+ pxa_device_btuart.dev.platform_data = info; -+} -+EXPORT_SYMBOL(pxa_set_btuart_info); -+ - static struct resource pxai2c_resources[] = { - { - .start = 0x40301680, -Index: linux-2.6.22/drivers/leds/Makefile -=================================================================== ---- linux-2.6.22.orig/drivers/leds/Makefile 2007-09-11 12:53:14.000000000 +0200 -+++ linux-2.6.22/drivers/leds/Makefile 2007-09-11 12:53:37.000000000 +0200 -@@ -16,6 +16,7 @@ - obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o - obj-$(CONFIG_LEDS_H1940) += leds-h1940.o - obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o -+obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o - obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o - - # LED Triggers -Index: linux-2.6.22/arch/arm/Kconfig -=================================================================== ---- linux-2.6.22.orig/arch/arm/Kconfig 2007-09-11 12:53:32.000000000 +0200 -+++ linux-2.6.22/arch/arm/Kconfig 2007-09-11 12:53:37.000000000 +0200 -@@ -1032,6 +1032,8 @@ - - source "drivers/w1/Kconfig" - -+source "drivers/power/Kconfig" -+ - source "drivers/hwmon/Kconfig" - - #source "drivers/l3/Kconfig" -Index: linux-2.6.22/drivers/input/keyboard/Kconfig -=================================================================== ---- linux-2.6.22.orig/drivers/input/keyboard/Kconfig 2007-09-11 14:28:45.000000000 +0200 -+++ linux-2.6.22/drivers/input/keyboard/Kconfig 2007-09-11 14:29:05.000000000 +0200 -@@ -253,4 +253,11 @@ - To compile this driver as a module, choose M here: the - module will be called gpio-keys. - -+config KEYBOARD_ASIC3 -+ tristate "Buttons on ASIC3 SoC GPIOs (iPaqs, etc.)" -+ depends on HTC_ASIC3 -+ help -+ This enables support for the buttons attached to GPIOs of -+ HTC ASIC3 peripheral controller. -+ - endif diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/hx2750_base-r31.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/hx2750_base-r31.patch deleted file mode 100644 index 5d58bcf55d..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/hx2750_base-r31.patch +++ /dev/null @@ -1,1094 +0,0 @@ ---- - arch/arm/mach-pxa/Kconfig | 10 - arch/arm/mach-pxa/Makefile | 1 - arch/arm/mach-pxa/hx2750.c | 450 ++++++++++++++++++++++++++++++++++++++ - arch/arm/mach-pxa/hx2750_test.c | 433 ++++++++++++++++++++++++++++++++++++ - arch/arm/mach-pxa/pm.c | 5 - arch/arm/mach-pxa/pxa25x.c | 4 - arch/arm/mach-pxa/pxa27x.c | 4 - include/asm-arm/arch-pxa/hx2750.h | 90 +++++++ - 8 files changed, 995 insertions(+), 2 deletions(-) - ---- /dev/null -+++ linux-2.6.24-rc1/include/asm-arm/arch-pxa/hx2750.h -@@ -0,0 +1,90 @@ -+/* -+ * Hardware specific definitions for iPAQ hx2750 -+ * -+ * Copyright 2005 Openedhand Ltd. -+ * -+ * Author: Richard Purdie -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+#ifndef __ASM_ARCH_HX2750_H -+#define __ASM_ARCH_HX2750_H 1 -+ -+/* -+ * HX2750 (Non Standard) GPIO Definitions -+ */ -+ -+#define HX2750_GPIO_KEYPWR (0) /* Power button */ -+#define HX2750_GPIO_BATTCOVER1 (9) /* Battery Cover Switch */ -+#define HX2750_GPIO_CF_IRQ (11) /* CF IRQ? */ -+#define HX2750_GPIO_USBCONNECT (12) /* USB Connected? */ -+#define HX2750_GPIO_CF_DETECT (13) /* CF Card Detect? */ -+#define HX2750_GPIO_EXTPWR (14) /* External Power Detect */ -+#define HX2750_GPIO_BATLVL (15) /* Battery Level Detect */ -+#define HX2750_GPIO_CF_PWR (17) /* CF Power? */ -+#define HX2750_GPIO_SR_STROBE (18) /* Shift Register Strobe */ -+#define HX2750_GPIO_CHARGE (22) /* Charging Enable (active low) */ -+#define HX2750_GPIO_TSC2101_SS (24) /* TSC2101 SS# */ -+#define HX2750_GPIO_BTPWR (27) /* Bluetooth Power? */ -+#define HX2750_GPIO_BATTCOVER2 (33) /* Battery Cover Switch */ -+#define HX2750_GPIO_SD_DETECT (38) /* MMC Card Detect */ -+#define HX2750_GPIO_SR_CLK1 (52) /* Shift Register Clock */ -+#define HX2750_GPIO_SR_CLK2 (53) -+#define HX2750_GPIO_CF_WIFIIRQ (54) /* CF Wifi IRQ? */ -+#define HX2750_GPIO_GPIO_DIN (88) /* Shift Register Data */ -+#define HX2750_GPIO_KEYLEFT (90) /* Left button */ -+#define HX2750_GPIO_KEYRIGHT (91) /* Right button */ -+#define HX2750_GPIO_KEYCAL (93) /* Calander button */ -+#define HX2750_GPIO_KEYTASK (94) /* Task button */ -+#define HX2750_GPIO_KEYSIDE (95) /* Side button */ -+#define HX2750_GPIO_KEYENTER (96) /* Enter Button*/ -+#define HX2750_GPIO_KEYCON (97) /* Contacts button */ -+#define HX2750_GPIO_KEYMAIL (98) /* Mail button */ -+#define HX2750_GPIO_BIOPWR (99) /* BIO Reader Power? */ -+#define HX2750_GPIO_KEYUP (100) /* Up button */ -+#define HX2750_GPIO_KEYDOWN (101) /* Down button*/ -+#define HX2750_GPIO_SD_READONLY (103) /* MMC/SD Write Protection */ -+#define HX2750_GPIO_LEDMAIL (106) /* Green Mail LED */ -+#define HX2750_GPIO_HP_JACK (108) /* Head Phone Jack Present */ -+#define HX2750_GPIO_PENDOWN (117) /* Touch Screen Pendown */ -+ -+ -+//#define HX2750_GPIO_ () /* */ -+ -+/* -+ * HX2750 Interrupts -+ */ -+#define HX2750_IRQ_GPIO_EXTPWR IRQ_GPIO(HX2750_GPIO_EXTPWR) -+#define HX2750_IRQ_GPIO_SD_DETECT IRQ_GPIO(HX2750_GPIO_SD_DETECT) -+#define HX2750_IRQ_GPIO_PENDOWN IRQ_GPIO(HX2750_GPIO_PENDOWN) -+#define HX2750_IRQ_GPIO_CF_DETECT IRQ_GPIO(HX2750_GPIO_CF_DETECT) -+#define HX2750_IRQ_GPIO_CF_IRQ IRQ_GPIO(HX2750_GPIO_CF_IRQ) -+#define HX2750_IRQ_GPIO_CF_WIFIIRQ IRQ_GPIO(HX2750_GPIO_CF_WIFIIRQ) -+ -+/* -+ * HX2750 Extra GPIO Definitions -+ */ -+ -+#define HX2750_EGPIO_WIFI_PWR (1 << 11) /* Wifi power */ -+#define HX2750_EGPIO_LCD_PWR (1 << 10) /* LCD Power */ -+#define HX2750_EGPIO_BL_PWR (1 << 9) /* Backlight LED Power */ -+#define HX2750_EGPIO_8 (1 << 8) /* */ -+#define HX2750_EGPIO_7 (1 << 7) /* */ -+#define HX2750_EGPIO_SD_PWR (1 << 6) /* SD Power */ -+#define HX2750_EGPIO_TSC_PWR (1 << 5) /* TS Power */ -+#define HX2750_EGPIO_CF0_RESET (1 << 4) /* CF0 Reset */ -+#define HX2750_EGPIO_CF1_RESET (1 << 3) /* CF1 Reset */ -+#define HX2750_EGPIO_2 (1 << 2) /* Power/Red LED Related?*/ -+#define HX2750_EGPIO_1 (1 << 1) /* Power/Red LED Related?*/ -+#define HX2750_EGPIO_PWRLED (1 << 0) /* Power/Red LED Related?*/ -+ -+ -+void hx2750_set_egpio(unsigned int gpio); -+void hx2750_clear_egpio(unsigned int gpio); -+ -+ -+#endif /* __ASM_ARCH_HX2750_H */ -+ ---- linux-2.6.24-rc1.orig/arch/arm/mach-pxa/Makefile -+++ linux-2.6.24-rc1/arch/arm/mach-pxa/Makefile -@@ -22,6 +22,7 @@ - obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o - obj-$(CONFIG_MACH_TOSA) += tosa.o - obj-$(CONFIG_MACH_EM_X270) += em-x270.o -+obj-$(CONFIG_MACH_HX2750) += hx2750.o hx2750_test.o - - ifeq ($(CONFIG_MACH_ZYLONITE),y) - obj-y += zylonite.o ---- /dev/null -+++ linux-2.6.24-rc1/arch/arm/mach-pxa/hx2750_test.c -@@ -0,0 +1,433 @@ -+/* -+ * HP iPAQ hx2750 Test Development Code -+ * -+ * Copyright 2005 Openedhand Ltd. -+ * -+ * Author: Richard Purdie -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+ -+ -+static int prodval; -+ -+/* -+ * Sysfs functions -+ */ -+static ssize_t test1_show(struct device *dev, char *buf) -+{ -+ unsigned long rp; -+ -+ asm ("mrc p15, 0, %0, cr1, cr0;\n" :"=r"(rp) ); -+ printk("%lx\n",rp); -+ -+ asm ("mrc p15, 0, %0, cr1, cr1;\n" :"=r"(rp) ); -+ printk("%lx\n",rp); -+ -+ asm ("mrc p15, 0, %0, cr2, cr0;\n" :"=r"(rp) ); -+ printk("%lx\n",rp); -+ -+ asm ("mrc p15, 0, %0, cr3, cr0;\n" :"=r"(rp) ); -+ printk("%lx\n",rp); -+ -+ asm ("mrc p15, 0, %0, cr13, cr0;\n" :"=r"(rp) ); -+ printk("%lx\n",rp); -+ -+ return sprintf(buf, "%d\n",prodval); -+} -+extern void tsc2101_print_miscdata(struct device *dev); -+extern struct platform_device tsc2101_device; -+ -+static ssize_t test1_store(struct device *dev, const char *buf, size_t count) -+{ -+ prodval = simple_strtoul(buf, NULL, 10); -+ -+ tsc2101_print_miscdata(&tsc2101_device.dev); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(test1, 0644, test1_show, test1_store); -+ -+static ssize_t test2_show(struct device *dev, char *buf) -+{ -+ printk(KERN_ERR "SSCR0_P2: %08x\n", SSCR0_P2); -+ printk(KERN_ERR "SSCR1_P2: %08x\n", SSCR1_P2); -+ printk(KERN_ERR "SSSR_P2: %08x\n", SSSR_P2); -+ printk(KERN_ERR "SSITR_P2: %08x\n", SSITR_P2); -+ printk(KERN_ERR "SSDR_P2: %08x\n", SSDR_P2); -+ printk(KERN_ERR "SSTO_P2: %08x\n", SSTO_P2); -+ printk(KERN_ERR "SSPSP_P2: %08x\n", SSPSP_P2); -+ -+ hx2750_ssp_init2(); -+ -+ printk(KERN_ERR "SSCR0_P2: %08x\n", SSCR0_P2); -+ printk(KERN_ERR "SSCR1_P2: %08x\n", SSCR1_P2); -+ printk(KERN_ERR "SSSR_P2: %08x\n", SSSR_P2); -+ printk(KERN_ERR "SSITR_P2: %08x\n", SSITR_P2); -+ printk(KERN_ERR "SSDR_P2: %08x\n", SSDR_P2); -+ printk(KERN_ERR "SSTO_P2: %08x\n", SSTO_P2); -+ printk(KERN_ERR "SSPSP_P2: %08x\n", SSPSP_P2); -+ -+ return sprintf(buf, "%d\n",0); -+} -+ -+static DEVICE_ATTR(test2, 0444, test2_show, NULL); -+ -+extern unsigned int hx2750_egpio_current; -+ -+static ssize_t setegpio_show(struct device *dev, char *buf) -+{ -+ return sprintf(buf, "%x\n",hx2750_egpio_current); -+} -+ -+static ssize_t setegpio_store(struct device *dev, const char *buf, size_t count) -+{ -+ unsigned int val = simple_strtoul(buf, NULL, 10); -+ -+ hx2750_set_egpio(1 << val); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(setegpio, 0644, setegpio_show, setegpio_store); -+ -+static ssize_t clregpio_show(struct device *dev, char *buf) -+{ -+ return sprintf(buf, "%x\n",hx2750_egpio_current); -+} -+ -+static ssize_t gpio_show(struct device *dev, char *buf) -+{ -+ int i; -+ -+ printk(KERN_ERR "GPIO# D S A INTER\n"); -+ -+ for (i=0;i<119;i++) { -+ printk(KERN_ERR " %3d: ",i); -+ if (GPDR(i) & GPIO_bit(i)) -+ printk("O "); -+ else -+ printk("I "); -+ printk("%d ",(GPLR(i) & GPIO_bit(i)) != 0); -+ printk("%d ",((GAFR(i) & (0x3 << (((i) & 0xf)*2)))) >> (((i) & 0xf)*2) ); -+ if (GEDR(i) & GPIO_bit(i)) -+ printk("ED "); -+ if (GRER(i) & GPIO_bit(i)) -+ printk("RE "); -+ if (GFER(i) & GPIO_bit(i)) -+ printk("FE "); -+ -+ printk("\n"); -+ } -+ return sprintf(buf, "EGPIO: %x\n",hx2750_egpio_current); -+} -+ -+static ssize_t clregpio_store(struct device *dev, const char *buf, size_t count) -+{ -+ unsigned int val = simple_strtoul(buf, NULL, 10); -+ -+ hx2750_clear_egpio(1 << val); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(clregpio, 0644, clregpio_show, clregpio_store); -+ -+ -+static ssize_t gpioclr_store(struct device *dev, const char *buf, size_t count) -+{ -+ int prod; -+ prod = simple_strtoul(buf, NULL, 10); -+ -+ GPCR(prod) = GPIO_bit(prod); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(gpioclr, 0644, gpio_show, gpioclr_store); -+ -+static ssize_t gpioset_store(struct device *dev, const char *buf, size_t count) -+{ -+ int prod; -+ prod = simple_strtoul(buf, NULL, 10); -+ -+ GPSR(prod) = GPIO_bit(prod); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(gpioset, 0644, gpio_show, gpioset_store); -+ -+ -+static ssize_t ssp2read_store(struct device *dev, const char *buf, size_t count) -+{ -+ unsigned int val = simple_strtoul(buf, NULL, 16); -+ -+ printk("Read: %08x\n",hx2750_ssp2_read(val)); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(ssp2read, 0200, NULL, ssp2read_store); -+ -+static ssize_t ssp2write_store(struct device *dev, const char *buf, size_t count) -+{ -+ unsigned int val = simple_strtoul(buf, NULL, 16); -+ -+ printk("Write: %08x\n",hx2750_ssp2_write(val)); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(ssp2write, 0200, NULL, ssp2write_store); -+ -+ -+static ssize_t sspr_store(struct device *dev, const char *buf, size_t count) -+{ -+ unsigned long val,ret; -+ val = simple_strtoul(buf, NULL, 0); -+ -+ hx2750_tsc2101_send(1<<15,val,&ret,1); -+ -+ printk("Response: %x\n",ret); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(sspr, 0200, NULL, sspr_store); -+ -+static ssize_t sspw_store(struct device *dev, const char *buf, size_t count) -+{ -+ int val,ret; -+ sscanf(buf, "%lx %lx", &val, &ret); -+ -+ hx2750_tsc2101_send(0,val,&ret,1); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(sspw, 0200, NULL, sspw_store); -+ -+ -+extern struct pm_ops pxa_pm_ops; -+extern void pxa_cpu_resume(void); -+extern unsigned long pxa_pm_pspr_value; -+ -+static int (*pxa_pm_enter_orig)(suspend_state_t state); -+ -+//static struct { -+// u32 ffier, fflcr, ffmcr, ffspr, ffisr, ffdll, ffdlh; -+//} sys_ctx; -+ -+u32 resstruct[20]; -+ -+static int hx2750_pxa_pm_enter(suspend_state_t state) -+{ -+ int i; -+ u32 save[10]; -+ -+ PWER = 0xC0000003;// | PWER_RTC; -+ PFER = 0x00000003; -+ PRER = 0x00000003; -+ -+ PGSR0=0x00000018; -+ PGSR1=0x00000380; -+ PGSR2=0x00800000; -+ PGSR3=0x00500400; -+ -+ //PVCR=0x494; or 0x14; -+ //PVCR=0x14; -+ //PCMD0=0x41f; -+ //i=PISR; -+ //PICR=0x00000062; -+ -+ //PCFR=0x457; -+ //PCFR=0x70; // Does not resume from sleep -+ PCFR=0x077; // was 0x477 -+ PSLR=0xff100004; -+ -+ resstruct[0]=0x0000b4e6; -+ resstruct[1]=0x00000001; -+ resstruct[2]=virt_to_phys(pxa_cpu_resume); -+ resstruct[3]=0xffffffff; //value for r0 -+ -+ resstruct[14]=0x00000078; //mcr 15, 0, r0, cr1, cr0, {0} -+ resstruct[15]=0x00000000; //mcr 15, 0, r0, cr1, cr1, {0} 0xffffffff -+ resstruct[16]=0xa0000000; //mcr 15, 0, r0, cr2, cr0, {0} 0xa0748000 -+ resstruct[17]=0x00000001; //mcr 15, 0, r0, cr3, cr0, {0} 0x00000015 -+ resstruct[18]=0x00000000; //mcr 15, 0, r0, cr13, cr0, {0} 0x00000000 -+ -+ pxa_pm_pspr_value=virt_to_phys(&resstruct[0]); -+ -+ hx2750_send_egpio(3); -+ -+ pxa_gpio_mode(87 | GPIO_OUT | GPIO_DFLT_HIGH); -+ -+ //sys_ctx.ffier = FFIER; -+ //sys_ctx.fflcr = FFLCR; -+ //sys_ctx.ffmcr = FFMCR; -+ //sys_ctx.ffspr = FFSPR; -+ //sys_ctx.ffisr = FFISR; -+ //FFLCR |= 0x80; -+ //sys_ctx.ffdll = FFDLL; -+ //sys_ctx.ffdlh = FFDLH; -+ //FFLCR &= 0xef; -+ -+ pxa_pm_enter_orig(state); -+ -+ //FFMCR = sys_ctx.ffmcr; -+ //FFSPR = sys_ctx.ffspr; -+ //FFLCR = sys_ctx.fflcr; -+ //FFLCR |= 0x80; -+ //FFDLH = sys_ctx.ffdlh; -+ //FFDLL = sys_ctx.ffdll; -+ //FFLCR = sys_ctx.fflcr; -+ //FFISR = sys_ctx.ffisr; -+ //FFLCR = 0x07; -+ //FFIER = sys_ctx.ffier; -+ -+ return 0; -+} -+ -+static irqreturn_t hx2750_charge_int(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ if ((GPLR(HX2750_GPIO_EXTPWR) & GPIO_bit(HX2750_GPIO_EXTPWR)) == 0) { -+ printk("Charging On\n"); -+ GPCR(HX2750_GPIO_CHARGE); -+ } else { -+ printk("Charging Off\n"); -+ GPSR(HX2750_GPIO_CHARGE); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+ -+ -+ -+static irqreturn_t hx2750_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ printk("Input %d changed.\n", irq-32); -+ -+ return IRQ_HANDLED; -+} -+ -+ -+static int __init hx2750_test_probe(struct device *dev) -+{ -+ pxa_gpio_mode(21 | GPIO_OUT | GPIO_DFLT_HIGH); -+ pxa_gpio_mode(HX2750_GPIO_CHARGE | GPIO_OUT | GPIO_DFLT_HIGH); -+ pxa_gpio_mode(83 | GPIO_OUT | GPIO_DFLT_HIGH); -+ pxa_gpio_mode(HX2750_GPIO_BIOPWR | GPIO_OUT | GPIO_DFLT_HIGH); -+ pxa_gpio_mode(116 | GPIO_OUT | GPIO_DFLT_HIGH); -+ pxa_gpio_mode(118 | GPIO_OUT | GPIO_DFLT_HIGH); -+ -+ -+ //pxa_gpio_mode(HX2750_GPIO_CF_PWR | GPIO_OUT | GPIO_DFLT_LOW); -+ pxa_gpio_mode(HX2750_GPIO_CF_PWR | GPIO_OUT | GPIO_DFLT_HIGH); -+ pxa_gpio_mode(HX2750_GPIO_BTPWR | GPIO_OUT | GPIO_DFLT_LOW); -+ pxa_gpio_mode(79 | GPIO_OUT | GPIO_DFLT_LOW); -+ pxa_gpio_mode(85 | GPIO_OUT | GPIO_DFLT_LOW); -+ pxa_gpio_mode(HX2750_GPIO_LEDMAIL | GPIO_OUT | GPIO_DFLT_LOW); -+ pxa_gpio_mode(107 | GPIO_OUT | GPIO_DFLT_LOW); -+ pxa_gpio_mode(114 | GPIO_OUT | GPIO_DFLT_LOW); -+ -+ pxa_gpio_mode(HX2750_GPIO_BATTCOVER1 | GPIO_IN); -+ pxa_gpio_mode(HX2750_GPIO_BATTCOVER2 | GPIO_IN); -+ pxa_gpio_mode(HX2750_GPIO_CF_IRQ | GPIO_IN); -+ pxa_gpio_mode(HX2750_GPIO_USBCONNECT | GPIO_IN); -+ pxa_gpio_mode(HX2750_GPIO_CF_DETECT | GPIO_IN); -+ pxa_gpio_mode(HX2750_GPIO_EXTPWR | GPIO_IN); -+ -+ pxa_gpio_mode(HX2750_GPIO_BATLVL | GPIO_IN); -+ //pxa_gpio_mode(HX2750_GPIO_CF_WIFIIRQ | GPIO_IN); -+ pxa_gpio_mode(80 | GPIO_IN); -+ pxa_gpio_mode(HX2750_GPIO_HP_JACK | GPIO_IN); -+ pxa_gpio_mode(115 | GPIO_IN); -+ pxa_gpio_mode(119 | GPIO_IN); -+ -+ request_irq(IRQ_GPIO(HX2750_GPIO_BATLVL), hx2750_interrupt, SA_INTERRUPT, "hx2750test", NULL); -+ //request_irq(IRQ_GPIO(HX2750_GPIO_CF_WIFIIRQ), hx2750_interrupt, SA_INTERRUPT, "hx2750test", NULL); -+ request_irq(IRQ_GPIO(80), hx2750_interrupt, SA_INTERRUPT, "hx2750test", NULL); -+ request_irq(IRQ_GPIO(115), hx2750_interrupt, SA_INTERRUPT, "hx2750test", NULL); -+ request_irq(IRQ_GPIO(119), hx2750_interrupt, SA_INTERRUPT, "hx2750test", NULL); -+ request_irq(IRQ_GPIO(HX2750_GPIO_SR_CLK2), hx2750_interrupt, SA_INTERRUPT, "hx2750test", NULL); -+ -+ //request_irq(IRQ_GPIO(10), hx2750_interrupt, SA_INTERRUPT, "hx2750test", NULL); -+ -+ set_irq_type(IRQ_GPIO(HX2750_GPIO_BATLVL),IRQT_BOTHEDGE); -+ //set_irq_type(IRQ_GPIO(HX2750_GPIO_CF_WIFIIRQ),IRQT_BOTHEDGE); -+ set_irq_type(IRQ_GPIO(80),IRQT_BOTHEDGE); -+ set_irq_type(IRQ_GPIO(115),IRQT_BOTHEDGE); -+ set_irq_type(IRQ_GPIO(119),IRQT_BOTHEDGE); -+ set_irq_type(IRQ_GPIO(HX2750_GPIO_SR_CLK2),IRQT_BOTHEDGE); -+ -+ //set_irq_type(IRQ_GPIO(10),IRQT_BOTHEDGE); -+ -+ printk("hx2750 Test Code Initialized.\n"); -+ device_create_file(dev, &dev_attr_test1); -+ device_create_file(dev, &dev_attr_test2); -+ device_create_file(dev, &dev_attr_setegpio); -+ device_create_file(dev, &dev_attr_clregpio); -+ device_create_file(dev, &dev_attr_gpioset); -+ device_create_file(dev, &dev_attr_gpioclr); -+ device_create_file(dev, &dev_attr_sspr); -+ device_create_file(dev, &dev_attr_sspw); -+ device_create_file(dev, &dev_attr_ssp2read); -+ device_create_file(dev, &dev_attr_ssp2write); -+ -+ request_irq(HX2750_IRQ_GPIO_EXTPWR, hx2750_charge_int, SA_INTERRUPT, "hx2750_extpwr", NULL); -+ set_irq_type(HX2750_IRQ_GPIO_EXTPWR, IRQT_BOTHEDGE); -+ -+ pxa_pm_enter_orig=pxa_pm_ops.enter; -+ pxa_pm_ops.enter=hx2750_pxa_pm_enter; -+ -+ return 0; -+} -+ -+static struct device_driver hx2750_test_driver = { -+ .name = "hx2750-test", -+ .bus = &platform_bus_type, -+ .probe = hx2750_test_probe, -+// .remove = hx2750_bl_remove, -+// .suspend = hx2750_bl_suspend, -+// .resume = hx2750_bl_resume, -+}; -+ -+ -+static int __init hx2750_test_init(void) -+{ -+ return driver_register(&hx2750_test_driver); -+} -+ -+ -+static void __exit hx2750_test_exit(void) -+{ -+ driver_unregister(&hx2750_test_driver); -+} -+ -+module_init(hx2750_test_init); -+module_exit(hx2750_test_exit); -+ -+MODULE_AUTHOR("Richard Purdie "); -+MODULE_DESCRIPTION("iPAQ hx2750 Backlight Driver"); -+MODULE_LICENSE("GPLv2"); ---- linux-2.6.24-rc1.orig/arch/arm/mach-pxa/Kconfig -+++ linux-2.6.24-rc1/arch/arm/mach-pxa/Kconfig -@@ -83,6 +83,15 @@ - bool "Sharp PXA270 models (SL-Cxx00)" - select PXA27x - -+config MACH_HX2750 -+ bool "HP iPAQ hx2750" -+ select PXA27x -+ select PXA_KEYS -+ select MFD_TSC2101 -+ select PXA_SSP -+ help -+ This enables support for the HP iPAQ HX2750 handheld. -+ - endchoice - - endif -@@ -181,3 +190,4 @@ - help - Enable support for PXA2xx SSP ports - endif -+ ---- /dev/null -+++ linux-2.6.24-rc1/arch/arm/mach-pxa/hx2750.c -@@ -0,0 +1,450 @@ -+/* -+ * Machine definitions for HP iPAQ hx2750 -+ * -+ * Copyright 2005 Openedhand Ltd. -+ * -+ * Author: Richard Purdie -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "generic.h" -+ -+ -+/* -+ * Keys Support -+ */ -+static struct pxa_keys_button hx2750_button_table[] = { -+ { KEY_POWER, HX2750_GPIO_KEYPWR, PXAKEY_PWR_KEY }, -+ { KEY_LEFT, HX2750_GPIO_KEYLEFT, 0 }, -+ { KEY_RIGHT, HX2750_GPIO_KEYRIGHT, 0 }, -+ { KEY_KP0, HX2750_GPIO_KEYCAL, 0 }, -+ { KEY_KP1, HX2750_GPIO_KEYTASK, 0 }, -+ { KEY_KP2, HX2750_GPIO_KEYSIDE, 0 }, -+ { KEY_ENTER, HX2750_GPIO_KEYENTER, 0 }, -+ { KEY_KP3, HX2750_GPIO_KEYCON, 0 }, //KEY_CONTACTS -+ { KEY_MAIL, HX2750_GPIO_KEYMAIL, 0 }, -+ { KEY_UP, HX2750_GPIO_KEYUP, 0 }, -+ { KEY_DOWN, HX2750_GPIO_KEYDOWN, 0 }, -+}; -+ -+static struct pxa_keys_platform_data hx2750_pxa_keys_data = { -+ .buttons = hx2750_button_table, -+ .nbuttons = ARRAY_SIZE(hx2750_button_table), -+}; -+ -+static struct platform_device hx2750_pxa_keys = { -+ .name = "pxa2xx-keys", -+ .dev = { -+ .platform_data = &hx2750_pxa_keys_data, -+ }, -+}; -+ -+ -+/* -+ * Backlight Device -+ */ -+extern struct platform_device pxafb_device; -+ -+static struct platform_device hx2750_bl_device = { -+ .name = "hx2750-bl", -+ .id = -1, -+// .dev = { -+// .parent = &pxafb_device.dev, -+// } -+}; -+ -+ -+/* -+ * UDC/USB -+ */ -+static int hx2750_udc_is_connected (void) -+{ -+ return GPLR0 & GPIO_bit(HX2750_GPIO_USBCONNECT); -+} -+ -+//static void hx2750_udc_command (int cmd) -+//{ -+//} -+ -+static struct pxa2xx_udc_mach_info hx2750_udc_mach_info = { -+ .udc_is_connected = hx2750_udc_is_connected, -+// .udc_command = hx2750_udc_command, -+}; -+ -+ -+/* -+ * SSP Devices Setup -+ */ -+static struct ssp_dev hx2750_ssp_dev1; -+static struct ssp_dev hx2750_ssp_dev2; -+static struct ssp_dev hx2750_ssp_dev3; -+ -+void hx2750_ssp_init(void) -+{ -+ pxa_gpio_mode(HX2750_GPIO_TSC2101_SS | GPIO_OUT | GPIO_DFLT_HIGH); -+ -+ if (ssp_init(&hx2750_ssp_dev1, 1, 0)) -+ printk(KERN_ERR "Unable to register SSP1 handler!\n"); -+ else { -+ ssp_disable(&hx2750_ssp_dev1); -+ ssp_config(&hx2750_ssp_dev1, (SSCR0_Motorola | (SSCR0_DSS & 0x0f )), SSCR1_SPH, 0, SSCR0_SerClkDiv(6)); -+ ssp_enable(&hx2750_ssp_dev1); -+ hx2750_set_egpio(HX2750_EGPIO_TSC_PWR); -+ } -+ -+// if (ssp_init(&hx2750_ssp_dev2, 2, 0)) -+// printk(KERN_ERR "Unable to register SSP2 handler!\n"); -+// else { -+// ssp_disable(&hx2750_ssp_dev2); -+// ssp_config(&hx2750_ssp_dev2, (SSCR0_TI | (SSCR0_DSS & 0x09 )), 0, 0, SSCR0_SerClkDiv(140)); -+// ssp_enable(&hx2750_ssp_dev2); -+// } -+// -+ if (ssp_init(&hx2750_ssp_dev3, 3, 0)) -+ printk(KERN_ERR "Unable to register SSP3 handler!\n"); -+ else { -+ ssp_disable(&hx2750_ssp_dev3); -+ ssp_config(&hx2750_ssp_dev3, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), SSCR1_SPO | SSCR1_SPH, 0, SSCR0_SerClkDiv(166)); -+ ssp_enable(&hx2750_ssp_dev3); -+ } -+ -+ printk("SSP Devices Initialised\n"); -+ -+ return; -+} -+ -+struct ssp_state ssp1; -+ -+void hx2750_ssp_suspend(void) -+{ -+ ssp_disable(&hx2750_ssp_dev1); -+ ssp_save_state(&hx2750_ssp_dev1,&ssp1); -+ hx2750_clear_egpio(HX2750_EGPIO_TSC_PWR); -+} -+ -+void hx2750_ssp_resume(void) -+{ -+ hx2750_set_egpio(HX2750_EGPIO_TSC_PWR); -+ ssp_restore_state(&hx2750_ssp_dev1,&ssp1); -+ ssp_enable(&hx2750_ssp_dev1); -+} -+ -+void hx2750_ssp_init2(void) -+{ -+ printk("Stage 1: %x\n",CKEN); -+ if (ssp_init(&hx2750_ssp_dev2, 2, 0)) -+ printk(KERN_ERR "Unable to register SSP2 handler!\n"); -+ else { -+ printk("Stage 2: %x\n",CKEN); -+ ssp_disable(&hx2750_ssp_dev2); -+ printk("Stage 3: %x\n",CKEN); -+ ssp_config(&hx2750_ssp_dev2, (SSCR0_TI | (SSCR0_DSS & 0x09 )) | SSCR0_SSE, 0, 0, SSCR0_SerClkDiv(212)); -+ printk("Stage 4: %x\n",CKEN); -+ ssp_enable(&hx2750_ssp_dev2); -+ printk("Stage 5: %x\n",CKEN); -+ } -+ printk("SSP Device2 Initialised\n"); -+ -+ printk("Sent: 0x3ff\n"); -+ ssp_write_word(&hx2750_ssp_dev2,0x3ff); -+ -+ return; -+} -+ -+void hx2750_ssp2_reset(void) -+{ -+ ssp_write_word(&hx2750_ssp_dev2,0x000); -+ ssp_write_word(&hx2750_ssp_dev2,0x000); -+ -+} -+ -+unsigned long hx2750_ssp2_read(void) -+{ -+ u32 ret = 0; -+ ssp_read_word(&hx2750_ssp_dev2, &ret); -+ return ret; -+} -+ -+void hx2750_ssp2_write(unsigned long data) -+{ -+ ssp_write_word(&hx2750_ssp_dev2, data); -+} -+ -+ -+/* -+ * Extra hx2750 Specific GPIOs -+ */ -+void hx2750_send_egpio(unsigned int val) -+{ -+ int i; -+ -+ GPCR0 = GPIO_bit(HX2750_GPIO_SR_STROBE); -+ GPCR1 = GPIO_bit(HX2750_GPIO_SR_CLK1); -+ -+ for (i=0;i<12;i++) { -+ if (val & 0x01) -+ GPSR2 = GPIO_bit(HX2750_GPIO_GPIO_DIN); -+ else -+ GPCR2 = GPIO_bit(HX2750_GPIO_GPIO_DIN); -+ val >>= 1; -+ GPSR1 = GPIO_bit(HX2750_GPIO_SR_CLK1); -+ GPCR1 = GPIO_bit(HX2750_GPIO_SR_CLK1); -+ } -+ -+ GPSR0 = GPIO_bit(HX2750_GPIO_SR_STROBE); -+ GPCR0 = GPIO_bit(HX2750_GPIO_SR_STROBE); -+} -+ -+EXPORT_SYMBOL(hx2750_send_egpio); -+ -+unsigned int hx2750_egpio_current; -+ -+void hx2750_set_egpio(unsigned int gpio) -+{ -+ hx2750_egpio_current|=gpio; -+ -+ hx2750_send_egpio(hx2750_egpio_current); -+} -+EXPORT_SYMBOL(hx2750_set_egpio); -+ -+void hx2750_clear_egpio(unsigned int gpio) -+{ -+ hx2750_egpio_current&=~gpio; -+ -+ hx2750_send_egpio(hx2750_egpio_current); -+} -+EXPORT_SYMBOL(hx2750_clear_egpio); -+ -+ -+/* -+ * Touchscreen/Sound/Battery Status -+ */ -+void hx2750_tsc2101_send(int read, int command, int *values, int numval) -+{ -+ u32 ret = 0; -+ int i; -+ -+ GPCR0 = GPIO_bit(HX2750_GPIO_TSC2101_SS); -+ -+ ssp_write_word(&hx2750_ssp_dev1, command | read); -+ /* dummy read */ -+ ssp_read_word(&hx2750_ssp_dev1, &ret); -+ -+ for (i=0; i < numval; i++) { -+ if (read) { -+ ssp_write_word(&hx2750_ssp_dev1, 0); -+ ssp_read_word(&hx2750_ssp_dev1, &values[i]); -+ } else { -+ ssp_write_word(&hx2750_ssp_dev1, values[i]); -+ ssp_read_word(&hx2750_ssp_dev1, &ret); -+ } -+ } -+ -+ GPSR0 = GPIO_bit(HX2750_GPIO_TSC2101_SS); -+} -+ -+static int hx2750_tsc2101_pendown(void) -+{ -+ if ((GPLR(HX2750_GPIO_PENDOWN) & GPIO_bit(HX2750_GPIO_PENDOWN)) == 0) -+ return 1; -+ return 0; -+} -+ -+static struct tsc2101_platform_info hx2750_tsc2101_info = { -+ .send = hx2750_tsc2101_send, -+ .suspend = hx2750_ssp_suspend, -+ .resume = hx2750_ssp_resume, -+ .irq = HX2750_IRQ_GPIO_PENDOWN, -+ .pendown = hx2750_tsc2101_pendown, -+}; -+ -+struct platform_device tsc2101_device = { -+ .name = "tsc2101", -+ .dev = { -+ .platform_data = &hx2750_tsc2101_info, -+ //.parent = &corgissp_device.dev, -+ }, -+ .id = -1, -+}; -+ -+ -+/* -+ * MMC/SD Device -+ * -+ * The card detect interrupt isn't debounced so we delay it by 250ms -+ * to give the card a chance to fully insert/eject. -+ */ -+static struct pxamci_platform_data hx2750_mci_platform_data; -+ -+static int hx2750_mci_init(struct device *dev, irq_handler_t hx2750_detect_int, void *data) -+{ -+ int err; -+ -+ /* -+ * setup GPIO for PXA27x MMC controller -+ */ -+ pxa_gpio_mode(GPIO32_MMCCLK_MD); -+ pxa_gpio_mode(GPIO112_MMCCMD_MD); -+ pxa_gpio_mode(GPIO92_MMCDAT0_MD); -+ pxa_gpio_mode(GPIO109_MMCDAT1_MD); -+ pxa_gpio_mode(GPIO110_MMCDAT2_MD); -+ pxa_gpio_mode(GPIO111_MMCDAT3_MD); -+ pxa_gpio_mode(HX2750_GPIO_SD_DETECT | GPIO_IN); -+ pxa_gpio_mode(HX2750_GPIO_SD_READONLY | GPIO_IN); -+ -+ hx2750_mci_platform_data.detect_delay = msecs_to_jiffies(250); -+ -+ err = request_irq(HX2750_IRQ_GPIO_SD_DETECT, hx2750_detect_int, -+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, -+ "MMC card detect", data); -+ if (err) { -+ printk(KERN_ERR "hx2750_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); -+ return -1; -+ } -+ -+ return 0; -+} -+ -+static void hx2750_mci_setpower(struct device *dev, unsigned int vdd) -+{ -+ struct pxamci_platform_data* p_d = dev->platform_data; -+ -+ if (( 1 << vdd) & p_d->ocr_mask) -+ hx2750_set_egpio(HX2750_EGPIO_SD_PWR); -+ else -+ hx2750_clear_egpio(HX2750_EGPIO_SD_PWR); -+} -+ -+static void hx2750_mci_exit(struct device *dev, void *data) -+{ -+ free_irq(HX2750_IRQ_GPIO_SD_DETECT, data); -+} -+ -+static struct pxamci_platform_data hx2750_mci_platform_data = { -+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, -+ .init = hx2750_mci_init, -+ .setpower = hx2750_mci_setpower, -+ .exit = hx2750_mci_exit, -+}; -+ -+ -+/* -+ * FrameBuffer -+ */ -+static struct pxafb_mode_info hx2750_pxafb_modes = { -+ .pixclock = 288462, -+ .xres = 240, -+ .yres = 320, -+ .bpp = 16, -+ .hsync_len = 20, -+ .left_margin = 42, -+ .right_margin = 18, -+ .vsync_len = 4, -+ .upper_margin = 3, -+ .lower_margin = 4, -+ .sync = 0, -+}; -+ -+static struct pxafb_mach_info hx2750_pxafb_info = { -+ .modes = &hx2750_pxafb_modes, -+ .num_modes = 1, -+ .fixed_modes = 1, -+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, -+ .lccr3 = LCCR3_PixFlEdg | LCCR3_OutEnH, -+ .pxafb_backlight_power = NULL, -+}; -+ -+ -+/* -+ * Test Device -+ */ -+static struct platform_device hx2750_test_device = { -+ .name = "hx2750-test", -+ .id = -1, -+}; -+ -+ -+/* Initialization code */ -+static struct platform_device *devices[] __initdata = { -+ &hx2750_bl_device, -+ &hx2750_test_device, -+ &hx2750_pxa_keys, -+ &tsc2101_device, -+}; -+ -+static void __init hx2750_init( void ) -+{ -+ PWER = 0xC0000003;// | PWER_RTC; -+ PFER = 0x00000003; -+ PRER = 0x00000003; -+ -+ PGSR0=0x00000018; -+ PGSR1=0x00000380; -+ PGSR2=0x00800000; -+ PGSR3=0x00500400; -+ -+ //PCFR |= PCFR_OPDE; -+ PCFR=0x77; -+ PSLR=0xff100000; -+ //PCFR=0x10; - does not return from suspend -+ -+ //PCFR= 0x00004040; -+ //PSLR= 0xff400f04; -+ -+ /* Setup Extra GPIO Bank access */ -+ pxa_gpio_mode(HX2750_GPIO_GPIO_DIN | GPIO_OUT | GPIO_DFLT_HIGH); -+ pxa_gpio_mode(HX2750_GPIO_SR_CLK1 | GPIO_OUT | GPIO_DFLT_LOW); -+ pxa_gpio_mode(HX2750_GPIO_SR_CLK2 | GPIO_IN); -+ pxa_gpio_mode(HX2750_GPIO_SR_STROBE | GPIO_OUT | GPIO_DFLT_LOW); -+ -+ /* Init Extra GPIOs - Bootloader reset default is 0x484 */ -+ /* This is 0xe84 */ -+ hx2750_set_egpio(HX2750_EGPIO_2 | HX2750_EGPIO_7 | HX2750_EGPIO_LCD_PWR | HX2750_EGPIO_BL_PWR | HX2750_EGPIO_WIFI_PWR); -+ -+ pxa_set_udc_info(&hx2750_udc_mach_info); -+ pxa_set_mci_info(&hx2750_mci_platform_data); -+ set_pxa_fb_info(&hx2750_pxafb_info); -+ hx2750_ssp_init(); -+ platform_add_devices (devices, ARRAY_SIZE (devices)); -+} -+ -+ -+MACHINE_START(HX2750, "HP iPAQ HX2750") -+ .phys_io = 0x40000000, -+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, -+ .boot_params = 0xa0000100, -+ .map_io = pxa_map_io, -+ .init_irq = pxa_init_irq, -+ .timer = &pxa_timer, -+ .init_machine = hx2750_init, -+MACHINE_END -+ ---- linux-2.6.24-rc1.orig/arch/arm/mach-pxa/pm.c -+++ linux-2.6.24-rc1/arch/arm/mach-pxa/pm.c -@@ -17,6 +17,7 @@ - #include - - #include -+#include - #include - #include - #include -@@ -91,6 +92,9 @@ - .enter = pxa_pm_enter, - }; - -+unsigned long pxa_pm_pspr_value; -+extern void pxa_cpu_resume(void); -+ - static int __init pxa_pm_init(void) - { - if (!pxa_cpu_pm_fns) { -@@ -104,6 +108,7 @@ - return -ENOMEM; - } - -+ pxa_pm_pspr_value=virt_to_phys(pxa_cpu_resume); - suspend_set_ops(&pxa_pm_ops); - return 0; - } ---- linux-2.6.24-rc1.orig/arch/arm/mach-pxa/pxa27x.c -+++ linux-2.6.24-rc1/arch/arm/mach-pxa/pxa27x.c -@@ -259,6 +259,8 @@ - RESTORE(PSTR); - } - -+extern unsigned long pxa_pm_pspr_value; -+ - void pxa27x_cpu_pm_enter(suspend_state_t state) - { - extern void pxa_cpu_standby(void); -@@ -281,7 +283,7 @@ - break; - case PM_SUSPEND_MEM: - /* set resume return address */ -- PSPR = virt_to_phys(pxa_cpu_resume); -+ PSPR = pxa_pm_pspr_value; - pxa27x_cpu_suspend(PWRMODE_SLEEP); - break; - } ---- linux-2.6.24-rc1.orig/arch/arm/mach-pxa/pxa25x.c -+++ linux-2.6.24-rc1/arch/arm/mach-pxa/pxa25x.c -@@ -200,6 +200,8 @@ - RESTORE(PSTR); - } - -+extern unsigned long pxa_pm_pspr_value; -+ - static void pxa25x_cpu_pm_enter(suspend_state_t state) - { - CKEN = 0; -@@ -207,7 +209,7 @@ - switch (state) { - case PM_SUSPEND_MEM: - /* set resume return address */ -- PSPR = virt_to_phys(pxa_cpu_resume); -+ PSPR = pxa_pm_pspr_value; - pxa25x_cpu_suspend(PWRMODE_SLEEP); - break; - } diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/mmcsd_no_scr_check-r2.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/mmcsd_no_scr_check-r2.patch deleted file mode 100644 index ac2245f088..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/mmcsd_no_scr_check-r2.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- - drivers/mmc/core/sd.c | 11 ++++++----- - 1 file changed, 6 insertions(+), 5 deletions(-) - -Index: linux-2.6.23/drivers/mmc/core/sd.c -=================================================================== ---- linux-2.6.23.orig/drivers/mmc/core/sd.c 2007-10-17 11:33:26.000000000 +0200 -+++ linux-2.6.23/drivers/mmc/core/sd.c 2007-10-17 11:33:49.000000000 +0200 -@@ -173,14 +173,15 @@ - - scr_struct = UNSTUFF_BITS(resp, 60, 4); - if (scr_struct != 0) { -- printk(KERN_ERR "%s: unrecognised SCR structure version %d\n", -+ printk(KERN_WARNING "%s: unrecognised SCR structure version %d\n", - mmc_hostname(card->host), scr_struct); -- return -EINVAL; -+ scr->sda_vsn = 0; -+ scr->bus_widths = 0; -+ } else { -+ scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4); -+ scr->bus_widths = UNSTUFF_BITS(resp, 48, 4); - } - -- scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4); -- scr->bus_widths = UNSTUFF_BITS(resp, 48, 4); -- - return 0; - } - diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pda-power.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pda-power.patch deleted file mode 100644 index face2f4ef2..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pda-power.patch +++ /dev/null @@ -1,3373 +0,0 @@ ---- - arch/arm/Kconfig | 2 - drivers/Kconfig | 2 - drivers/Makefile | 1 - drivers/power/Kconfig | 70 +++++ - drivers/power/Makefile | 28 ++ - drivers/power/adc_battery.c | 278 +++++++++++++++++++++ - drivers/power/apm_power.c | 247 +++++++++++++++++++ - drivers/power/ds2760_battery.c | 475 +++++++++++++++++++++++++++++++++++++ - drivers/power/micro_battery.c | 257 ++++++++++++++++++++ - drivers/power/olpc_battery.c | 302 +++++++++++++++++++++++ - drivers/power/pda_power.c | 263 ++++++++++++++++++++ - drivers/power/pmu_battery.c | 215 ++++++++++++++++ - drivers/power/power_supply.h | 42 +++ - drivers/power/power_supply_core.c | 168 +++++++++++++ - drivers/power/power_supply_leds.c | 188 ++++++++++++++ - drivers/power/power_supply_sysfs.c | 289 ++++++++++++++++++++++ - drivers/power/simpad-battery.c | 242 ++++++++++++++++++ - include/linux/power_supply.h | 175 +++++++++++++ - 18 files changed, 3244 insertions(+) - -Index: linux-2.6.22/drivers/power/adc_battery.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/adc_battery.c 2007-08-23 12:26:28.000000000 +0200 -@@ -0,0 +1,278 @@ -+/* -+ * Copyright (c) 2007 Paul Sokolovsky -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ */ -+ -+//#define DEBUG -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define PIN_NO_VOLT 0 -+#define PIN_NO_CURR 1 -+#define PIN_NO_TEMP 2 -+ -+struct battery_adc_priv { -+ struct power_supply batt_cdev; -+ -+ struct battery_adc_platform_data *pdata; -+ -+ struct adc_request req; -+ struct adc_sense pins[3]; -+ struct adc_sense last_good_pins[3]; -+ -+ struct workqueue_struct *wq; -+ struct delayed_work work; -+}; -+ -+/* -+ * Battery properties -+ */ -+ -+static int adc_battery_get_property(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ struct battery_adc_priv* drvdata = (struct battery_adc_priv*)psy; -+ int voltage; -+ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_STATUS: -+ val->intval = drvdata->pdata->charge_status; -+ break; -+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: -+ val->intval = drvdata->pdata->battery_info.voltage_max_design; -+ break; -+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: -+ val->intval = drvdata->pdata->battery_info.voltage_min_design; -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: -+ val->intval = drvdata->pdata->battery_info.charge_full_design; -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN: -+ val->intval = drvdata->pdata->battery_info.charge_empty_design; -+ break; -+ case POWER_SUPPLY_PROP_VOLTAGE_NOW: -+ val->intval = drvdata->last_good_pins[PIN_NO_VOLT].value * drvdata->pdata->voltage_mult; -+ break; -+ case POWER_SUPPLY_PROP_CURRENT_NOW: -+ val->intval = drvdata->last_good_pins[PIN_NO_CURR].value * drvdata->pdata->current_mult; -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_NOW: -+ /* We do calculations in mX, not uX, because todo it in uX we should use "long long"s, -+ * which is a mess (need to use do_div) when you need divide operation). */ -+ voltage = drvdata->last_good_pins[PIN_NO_VOLT].value * drvdata->pdata->voltage_mult; -+ val->intval = ((voltage/1000 - drvdata->pdata->battery_info.voltage_min_design/1000) * -+ (drvdata->pdata->battery_info.charge_full_design/1000 - -+ drvdata->pdata->battery_info.charge_empty_design/1000)) / -+ (drvdata->pdata->battery_info.voltage_max_design/1000 - -+ drvdata->pdata->battery_info.voltage_min_design/1000); -+ val->intval *= 1000; /* convert final result to uX */ -+ break; -+ case POWER_SUPPLY_PROP_TEMP: -+ val->intval = drvdata->last_good_pins[PIN_NO_TEMP].value * drvdata->pdata->temperature_mult / 1000; -+ break; -+ default: -+ return -EINVAL; -+ }; -+ return 0; -+} -+ -+/* -+ * Driver body -+ */ -+ -+static void adc_battery_query(struct battery_adc_priv *drvdata) -+{ -+ struct battery_adc_platform_data *pdata = drvdata->pdata; -+ int powered, charging; -+ -+ adc_request_sample(&drvdata->req); -+ -+ powered = power_supply_am_i_supplied(&drvdata->batt_cdev); -+ charging = pdata->is_charging ? pdata->is_charging() : -1; -+ -+ if (powered && charging) -+ pdata->charge_status = POWER_SUPPLY_STATUS_CHARGING; -+ else if (powered && !charging && charging != -1) -+ pdata->charge_status = POWER_SUPPLY_STATUS_FULL; -+ else -+ pdata->charge_status = POWER_SUPPLY_STATUS_DISCHARGING; -+ -+ /* Throw away invalid samples, this may happen soon after resume for example. */ -+ if (drvdata->pins[PIN_NO_VOLT].value > 0) { -+ memcpy(drvdata->last_good_pins, drvdata->pins, sizeof(drvdata->pins)); -+#ifdef DEBUG -+ printk("%d %d %d\n", drvdata->pins[PIN_NO_VOLT].value, -+ drvdata->pins[PIN_NO_CURR].value, -+ drvdata->pins[PIN_NO_TEMP].value); -+#endif -+ } -+} -+ -+static void adc_battery_charge_power_changed(struct power_supply *bat) -+{ -+ struct battery_adc_priv *drvdata = (struct battery_adc_priv*)bat; -+ cancel_delayed_work(&drvdata->work); -+ queue_delayed_work(drvdata->wq, &drvdata->work, 0); -+} -+ -+static void adc_battery_work_func(struct work_struct *work) -+{ -+ struct delayed_work *delayed_work = container_of(work, struct delayed_work, work); -+ struct battery_adc_priv *drvdata = container_of(delayed_work, struct battery_adc_priv, work); -+ -+ adc_battery_query(drvdata); -+ power_supply_changed(&drvdata->batt_cdev); -+ -+ queue_delayed_work(drvdata->wq, &drvdata->work, (5000 * HZ) / 1000); -+} -+ -+static int adc_battery_probe(struct platform_device *pdev) -+{ -+ int retval; -+ struct battery_adc_platform_data *pdata = pdev->dev.platform_data; -+ struct battery_adc_priv *drvdata; -+ int i, j; -+ enum power_supply_property props[] = { -+ POWER_SUPPLY_PROP_STATUS, -+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, -+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, -+ POWER_SUPPLY_PROP_VOLTAGE_NOW, -+ POWER_SUPPLY_PROP_CURRENT_NOW, -+ POWER_SUPPLY_PROP_CHARGE_NOW, -+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, -+ POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN, -+ POWER_SUPPLY_PROP_TEMP, -+ }; -+ -+ // Initialize ts data structure. -+ drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); -+ if (!drvdata) -+ return -ENOMEM; -+ -+ drvdata->batt_cdev.name = pdata->battery_info.name; -+ drvdata->batt_cdev.use_for_apm = pdata->battery_info.use_for_apm; -+ drvdata->batt_cdev.num_properties = ARRAY_SIZE(props); -+ drvdata->batt_cdev.get_property = adc_battery_get_property; -+ drvdata->batt_cdev.external_power_changed = -+ adc_battery_charge_power_changed; -+ -+ if (!pdata->voltage_pin) { -+ drvdata->batt_cdev.num_properties--; -+ props[3] = -1; -+ } -+ if (!pdata->current_pin) { -+ drvdata->batt_cdev.num_properties--; -+ props[4] = -1; -+ } -+ if (!pdata->temperature_pin) { -+ drvdata->batt_cdev.num_properties--; -+ props[8] = -1; -+ } -+ -+ drvdata->batt_cdev.properties = kmalloc( -+ sizeof(*drvdata->batt_cdev.properties) * -+ drvdata->batt_cdev.num_properties, GFP_KERNEL); -+ if (!drvdata->batt_cdev.properties) -+ return -ENOMEM; -+ -+ j = 0; -+ for (i = 0; i < ARRAY_SIZE(props); i++) { -+ if (props[i] == -1) -+ continue; -+ drvdata->batt_cdev.properties[j++] = props[i]; -+ } -+ -+ retval = power_supply_register(&pdev->dev, &drvdata->batt_cdev); -+ if (retval) { -+ printk("adc-battery: Error registering battery classdev"); -+ return retval; -+ } -+ -+ drvdata->req.senses = drvdata->pins; -+ drvdata->req.num_senses = ARRAY_SIZE(drvdata->pins); -+ drvdata->pins[PIN_NO_VOLT].name = pdata->voltage_pin; -+ drvdata->pins[PIN_NO_CURR].name = pdata->current_pin; -+ drvdata->pins[PIN_NO_TEMP].name = pdata->temperature_pin; -+ -+ adc_request_register(&drvdata->req); -+ -+ /* Here we assume raw values in mV */ -+ if (!pdata->voltage_mult) -+ pdata->voltage_mult = 1000; -+ /* Here we assume raw values in mA */ -+ if (!pdata->current_mult) -+ pdata->current_mult = 1000; -+ /* Here we assume raw values in 1/10 C */ -+ if (!pdata->temperature_mult) -+ pdata->temperature_mult = 1000; -+ -+ drvdata->pdata = pdata; -+ pdata->drvdata = drvdata; /* Seems ugly, we need better solution */ -+ -+ platform_set_drvdata(pdev, drvdata); -+ -+ // Load initial values ASAP -+ adc_battery_query(drvdata); -+ -+ // Still schedule next sampling soon -+ INIT_DELAYED_WORK(&drvdata->work, adc_battery_work_func); -+ drvdata->wq = create_workqueue(pdev->dev.bus_id); -+ if (!drvdata->wq) -+ return -ESRCH; -+ -+ queue_delayed_work(drvdata->wq, &drvdata->work, (5000 * HZ) / 1000); -+ -+ return retval; -+} -+ -+static int adc_battery_remove(struct platform_device *pdev) -+{ -+ struct battery_adc_priv *drvdata = platform_get_drvdata(pdev); -+ cancel_delayed_work(&drvdata->work); -+ destroy_workqueue(drvdata->wq); -+ power_supply_unregister(&drvdata->batt_cdev); -+ adc_request_unregister(&drvdata->req); -+ kfree(drvdata->batt_cdev.properties); -+ return 0; -+} -+ -+static struct platform_driver adc_battery_driver = { -+ .driver = { -+ .name = "adc-battery", -+ }, -+ .probe = adc_battery_probe, -+ .remove = adc_battery_remove, -+}; -+ -+static int __init adc_battery_init(void) -+{ -+ return platform_driver_register(&adc_battery_driver); -+} -+ -+static void __exit adc_battery_exit(void) -+{ -+ platform_driver_unregister(&adc_battery_driver); -+} -+ -+module_init(adc_battery_init) -+module_exit(adc_battery_exit) -+ -+MODULE_AUTHOR("Paul Sokolovsky"); -+MODULE_DESCRIPTION("Battery driver for ADC device"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.22/drivers/power/apm_power.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/apm_power.c 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,247 @@ -+/* -+ * Copyright (c) 2007 Anton Vorontsov -+ * Copyright (c) 2007 Eugeny Boger -+ * -+ * Author: Eugeny Boger -+ * -+ * Use consistent with the GNU GPL is permitted, -+ * provided that this copyright notice is -+ * preserved in its entirety in all copies and derived works. -+ */ -+ -+#include -+#include -+#include -+ -+#define PSY_PROP(psy, prop, val) psy->get_property(psy, \ -+ POWER_SUPPLY_PROP_##prop, val) -+ -+#define _MPSY_PROP(prop, val) main_battery->get_property(main_battery, \ -+ prop, val) -+ -+#define MPSY_PROP(prop, val) _MPSY_PROP(POWER_SUPPLY_PROP_##prop, val) -+ -+static struct power_supply *main_battery; -+ -+static void find_main_battery(void) -+{ -+ struct device *dev; -+ struct power_supply *bat, *batm; -+ union power_supply_propval full; -+ int max_charge = 0; -+ -+ main_battery = NULL; -+ batm = NULL; -+ list_for_each_entry(dev, &power_supply_class->devices, node) { -+ bat = dev_get_drvdata(dev); -+ /* If none of battery devices cantains 'use_for_apm' flag, -+ choice one with maximum design charge */ -+ if (!PSY_PROP(bat, CHARGE_FULL_DESIGN, &full)) { -+ if (full.intval > max_charge) { -+ batm = bat; -+ max_charge = full.intval; -+ } -+ } -+ -+ if (bat->use_for_apm) -+ main_battery = bat; -+ } -+ if (!main_battery) -+ main_battery = batm; -+ -+ return; -+} -+ -+static int calculate_time(int status) -+{ -+ union power_supply_propval charge_full, charge_empty; -+ union power_supply_propval charge, I; -+ -+ if (MPSY_PROP(CHARGE_FULL, &charge_full)) { -+ /* if battery can't report this property, use design value */ -+ if (MPSY_PROP(CHARGE_FULL_DESIGN, &charge_full)) -+ return -1; -+ } -+ -+ if (MPSY_PROP(CHARGE_EMPTY, &charge_empty)) { -+ /* if battery can't report this property, use design value */ -+ if (MPSY_PROP(CHARGE_EMPTY_DESIGN, &charge_empty)) -+ charge_empty.intval = 0; -+ } -+ -+ if (MPSY_PROP(CHARGE_AVG, &charge)) { -+ /* if battery can't report average value, use momentary */ -+ if (MPSY_PROP(CHARGE_NOW, &charge)) -+ return -1; -+ } -+ -+ if (MPSY_PROP(CURRENT_AVG, &I)) { -+ /* if battery can't report average value, use momentary */ -+ if (MPSY_PROP(CURRENT_NOW, &I)) -+ return -1; -+ } -+ -+ if (I.intval == 0) -+ return 0; -+ else if (status == POWER_SUPPLY_STATUS_CHARGING) -+ return ((charge.intval - charge_full.intval) * 60L) / -+ I.intval; -+ else -+ return -((charge.intval - charge_empty.intval) * 60L) / -+ I.intval; -+} -+ -+static int calculate_capacity(int using_charge) -+{ -+ enum power_supply_property full_prop, empty_prop; -+ enum power_supply_property full_design_prop, empty_design_prop; -+ enum power_supply_property now_prop, avg_prop; -+ union power_supply_propval empty, full, cur; -+ int ret; -+ -+ if (using_charge) { -+ full_prop = POWER_SUPPLY_PROP_CHARGE_FULL; -+ empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY; -+ full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN; -+ empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN; -+ now_prop = POWER_SUPPLY_PROP_CHARGE_NOW; -+ avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG; -+ } -+ else { -+ full_prop = POWER_SUPPLY_PROP_ENERGY_FULL; -+ empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY; -+ full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN; -+ empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN; -+ now_prop = POWER_SUPPLY_PROP_ENERGY_NOW; -+ avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG; -+ } -+ -+ if (_MPSY_PROP(full_prop, &full)) { -+ /* if battery can't report this property, use design value */ -+ if (_MPSY_PROP(full_design_prop, &full)) -+ return -1; -+ } -+ -+ if (_MPSY_PROP(avg_prop, &cur)) { -+ /* if battery can't report average value, use momentary */ -+ if (_MPSY_PROP(now_prop, &cur)) -+ return -1; -+ } -+ -+ if (_MPSY_PROP(empty_prop, &empty)) { -+ /* if battery can't report this property, use design value */ -+ if (_MPSY_PROP(empty_design_prop, &empty)) -+ empty.intval = 0; -+ } -+ -+ if (full.intval - empty.intval) -+ ret = ((cur.intval - empty.intval) * 100L) / -+ (full.intval - empty.intval); -+ else -+ return -1; -+ -+ if (ret > 100) -+ return 100; -+ else if (ret < 0) -+ return 0; -+ -+ return ret; -+} -+ -+static void apm_battery_apm_get_power_status(struct apm_power_info *info) -+{ -+ union power_supply_propval status; -+ union power_supply_propval capacity, time_to_full, time_to_empty; -+ -+ down(&power_supply_class->sem); -+ find_main_battery(); -+ if (!main_battery) { -+ up(&power_supply_class->sem); -+ return; -+ } -+ -+ /* status */ -+ -+ if (MPSY_PROP(STATUS, &status)) -+ status.intval = POWER_SUPPLY_STATUS_UNKNOWN; -+ -+ /* ac line status */ -+ -+ if ((status.intval == POWER_SUPPLY_STATUS_CHARGING) || -+ (status.intval == POWER_SUPPLY_STATUS_NOT_CHARGING) || -+ (status.intval == POWER_SUPPLY_STATUS_FULL)) -+ info->ac_line_status = APM_AC_ONLINE; -+ else -+ info->ac_line_status = APM_AC_OFFLINE; -+ -+ /* battery life (i.e. capacity, in percents) */ -+ -+ if (MPSY_PROP(CAPACITY, &capacity) == 0) -+ info->battery_life = capacity.intval; -+ else { -+ /* try calculate using energy */ -+ info->battery_life = calculate_capacity(0); -+ /* if failed try calculate using charge instead */ -+ if (info->battery_life == -1) -+ info->battery_life = calculate_capacity(1); -+ } -+ -+ /* charging status */ -+ -+ if (status.intval == POWER_SUPPLY_STATUS_CHARGING) -+ info->battery_status = APM_BATTERY_STATUS_CHARGING; -+ else { -+ if (info->battery_life > 50) -+ info->battery_status = APM_BATTERY_STATUS_HIGH; -+ else if (info->battery_life > 5) -+ info->battery_status = APM_BATTERY_STATUS_LOW; -+ else -+ info->battery_status = APM_BATTERY_STATUS_CRITICAL; -+ } -+ info->battery_flag = info->battery_status; -+ -+ /* time */ -+ -+ info->units = APM_UNITS_MINS; -+ -+ if (status.intval == POWER_SUPPLY_STATUS_CHARGING) { -+ if (MPSY_PROP(TIME_TO_FULL_AVG, &time_to_full)) { -+ if (MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full)) -+ info->time = calculate_time(status.intval); -+ else -+ info->time = time_to_full.intval / 60; -+ } -+ } -+ else { -+ if (MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty)) { -+ if (MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty)) -+ info->time = calculate_time(status.intval); -+ else -+ info->time = time_to_empty.intval / 60; -+ } -+ } -+ -+ up(&power_supply_class->sem); -+ return; -+} -+ -+static int __init apm_battery_init(void) -+{ -+ printk(KERN_INFO "APM Battery Driver\n"); -+ -+ apm_get_power_status = apm_battery_apm_get_power_status; -+ return 0; -+} -+ -+static void __exit apm_battery_exit(void) -+{ -+ apm_get_power_status = NULL; -+ return; -+} -+ -+module_init(apm_battery_init); -+module_exit(apm_battery_exit); -+ -+MODULE_AUTHOR("Eugeny Boger "); -+MODULE_DESCRIPTION("APM emulation driver for battery monitoring class"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.22/drivers/power/ds2760_battery.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/ds2760_battery.c 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,475 @@ -+/* -+ * Driver for batteries with DS2760 chips inside. -+ * -+ * Copyright (c) 2007 Anton Vorontsov -+ * 2004-2007 Matt Reimer -+ * 2004 Szabolcs Gyurko -+ * -+ * Use consistent with the GNU GPL is permitted, -+ * provided that this copyright notice is -+ * preserved in its entirety in all copies and derived works. -+ * -+ * Author: Anton Vorontsov -+ * February 2007 -+ * -+ * Matt Reimer -+ * April 2004, 2005, 2007 -+ * -+ * Szabolcs Gyurko -+ * September 2004 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../w1/w1.h" -+#include "../w1/slaves/w1_ds2760.h" -+ -+struct ds2760_device_info { -+ struct device *dev; -+ -+ /* DS2760 data, valid after calling ds2760_battery_read_status() */ -+ unsigned long update_time; /* jiffies when data read */ -+ char raw[DS2760_DATA_SIZE]; /* raw DS2760 data */ -+ int voltage_raw; /* units of 4.88 mV */ -+ int voltage_uV; /* units of uV */ -+ int current_raw; /* units of 0.625 mA */ -+ int current_uA; /* units of uA */ -+ int accum_current_raw; /* units of 0.25 mAh */ -+ int accum_current_uAh; /* units of uAh */ -+ int temp_raw; /* units of 0.125 C */ -+ int temp_C; /* units of 0.1 C */ -+ int rated_capacity; /* units of uAh */ -+ int rem_capacity; /* percentage */ -+ int full_active_uAh; /* units of uAh */ -+ int empty_uAh; /* units of uAh */ -+ int life_sec; /* units of seconds */ -+ int charge_status; /* POWER_SUPPLY_STATUS_* */ -+ -+ int full_counter; -+ struct power_supply bat; -+ struct device *w1_dev; -+ struct workqueue_struct *monitor_wqueue; -+ struct delayed_work monitor_work; -+}; -+ -+static unsigned int cache_time = 1000; -+module_param(cache_time, uint, 0644); -+MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); -+ -+/* Some batteries have their rated capacity stored a N * 10 mAh, while -+ * others use an index into this table. */ -+static int rated_capacities[] = { -+ 0, -+ 920, /* Samsung */ -+ 920, /* BYD */ -+ 920, /* Lishen */ -+ 920, /* NEC */ -+ 1440, /* Samsung */ -+ 1440, /* BYD */ -+ 1440, /* Lishen */ -+ 1440, /* NEC */ -+ 2880, /* Samsung */ -+ 2880, /* BYD */ -+ 2880, /* Lishen */ -+ 2880 /* NEC */ -+}; -+ -+/* array is level at temps 0C, 10C, 20C, 30C, 40C -+ * temp is in Celsius */ -+static int battery_interpolate(int array[], int temp) -+{ -+ int index, dt; -+ -+ if (temp <= 0) -+ return array[0]; -+ if (temp >= 40) -+ return array[4]; -+ -+ index = temp / 10; -+ dt = temp % 10; -+ -+ return array[index] + (((array[index + 1] - array[index]) * dt) / 10); -+} -+ -+static int ds2760_battery_read_status(struct ds2760_device_info *di) -+{ -+ int ret, i, start, count, scale[5]; -+ -+ if (di->update_time && time_before(jiffies, di->update_time + -+ msecs_to_jiffies(cache_time))) -+ return 0; -+ -+ /* The first time we read the entire contents of SRAM/EEPROM, -+ * but after that we just read the interesting bits that change. */ -+ if (di->update_time == 0) { -+ start = 0; -+ count = DS2760_DATA_SIZE; -+ } -+ else { -+ start = DS2760_VOLTAGE_MSB; -+ count = DS2760_TEMP_LSB - start + 1; -+ } -+ -+ ret = w1_ds2760_read(di->w1_dev, di->raw + start, start, count); -+ if (ret != count) { -+ dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n", -+ di->w1_dev); -+ return 1; -+ } -+ -+ di->update_time = jiffies; -+ -+ /* DS2760 reports voltage in units of 4.88mV, but the battery class -+ * reports in units of uV, so convert by multiplying by 4880. */ -+ di->voltage_raw = (di->raw[DS2760_VOLTAGE_MSB] << 3) | -+ (di->raw[DS2760_VOLTAGE_LSB] >> 5); -+ di->voltage_uV = di->voltage_raw * 4880; -+ -+ /* DS2760 reports current in signed units of 0.625mA, but the battery -+ * class reports in units of uA, so convert by multiplying by 625. */ -+ di->current_raw = -+ (((signed char)di->raw[DS2760_CURRENT_MSB]) << 5) | -+ (di->raw[DS2760_CURRENT_LSB] >> 3); -+ di->current_uA = di->current_raw * 625; -+ -+ /* DS2760 reports accumulated current in signed units of 0.25mAh. */ -+ di->accum_current_raw = -+ (((signed char)di->raw[DS2760_CURRENT_ACCUM_MSB]) << 8) | -+ di->raw[DS2760_CURRENT_ACCUM_LSB]; -+ di->accum_current_uAh = di->accum_current_raw * 250; -+ -+ /* DS2760 reports temperature in signed units of 0.125C, but the -+ * battery class reports in units of 1/10 C, so we convert by -+ * multiplying by .125 * 10 = 1.25. */ -+ di->temp_raw = (((signed char)di->raw[DS2760_TEMP_MSB]) << 3) | -+ (di->raw[DS2760_TEMP_LSB] >> 5); -+ di->temp_C = di->temp_raw + (di->temp_raw / 4); -+ -+ /* At least some battery monitors (e.g. HP iPAQ) store the battery's -+ * maximum rated capacity. */ -+ if (di->raw[DS2760_RATED_CAPACITY] < ARRAY_SIZE(rated_capacities)) -+ di->rated_capacity = rated_capacities[ -+ (unsigned int)di->raw[DS2760_RATED_CAPACITY]]; -+ else -+ di->rated_capacity = di->raw[DS2760_RATED_CAPACITY] * 10; -+ -+ di->rated_capacity *= 1000; /* convert to uAh */ -+ -+ /* Calculate the full level at the present temperature. */ -+ di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 | -+ di->raw[DS2760_ACTIVE_FULL + 1]; -+ -+ scale[0] = di->raw[DS2760_ACTIVE_FULL] << 8 | -+ di->raw[DS2760_ACTIVE_FULL + 1]; -+ for (i = 1; i < 5; i++) -+ scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 2 + i]; -+ -+ di->full_active_uAh = battery_interpolate(scale, di->temp_C / 10); -+ di->full_active_uAh *= 1000; /* convert to uAh */ -+ -+ /* Calculate the empty level at the present temperature. */ -+ scale[4] = di->raw[DS2760_ACTIVE_EMPTY + 4]; -+ for (i = 3; i >= 0; i--) -+ scale[i] = scale[i + 1] + di->raw[DS2760_ACTIVE_EMPTY + i]; -+ -+ di->empty_uAh = battery_interpolate(scale, di->temp_C / 10); -+ di->empty_uAh *= 1000; /* convert to uAh */ -+ -+ /* From Maxim Application Note 131: remaining capacity = -+ * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */ -+ di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) / -+ (di->full_active_uAh - di->empty_uAh); -+ -+ if (di->rem_capacity < 0) -+ di->rem_capacity = 0; -+ if (di->rem_capacity > 100) -+ di->rem_capacity = 100; -+ -+ if (di->current_uA) -+ di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * -+ 3600L) / di->current_uA; -+ else -+ di->life_sec = 0; -+ -+ return 0; -+} -+ -+static void ds2760_battery_update_status(struct ds2760_device_info *di) -+{ -+ int old_charge_status = di->charge_status; -+ -+ ds2760_battery_read_status(di); -+ -+ if (di->charge_status == POWER_SUPPLY_STATUS_UNKNOWN) -+ di->full_counter = 0; -+ -+ if (power_supply_am_i_supplied(&di->bat)) { -+ if (di->current_uA > 10000) { -+ di->charge_status = POWER_SUPPLY_STATUS_CHARGING; -+ di->full_counter = 0; -+ } -+ else if (di->current_uA < -5000) { -+ if (di->charge_status != POWER_SUPPLY_STATUS_NOT_CHARGING) -+ dev_notice(di->dev, "not enough power to " -+ "charge\n"); -+ di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; -+ di->full_counter = 0; -+ } -+ else if (di->current_uA < 10000 && -+ di->charge_status != POWER_SUPPLY_STATUS_FULL) { -+ -+ /* Don't consider the battery to be full unless -+ * we've seen the current < 10 mA at least two -+ * consecutive times. */ -+ -+ di->full_counter++; -+ -+ if (di->full_counter < 2) -+ di->charge_status = POWER_SUPPLY_STATUS_CHARGING; -+ else { -+ unsigned char acr[2]; -+ int acr_val; -+ -+ /* acr is in units of 0.25 mAh */ -+ acr_val = di->full_active_uAh * 4L / 1000; -+ -+ acr[0] = acr_val >> 8; -+ acr[1] = acr_val & 0xff; -+ -+ if (w1_ds2760_write(di->w1_dev, acr, -+ DS2760_CURRENT_ACCUM_MSB, 2) < 2) -+ dev_warn(di->dev, -+ "ACR reset failed\n"); -+ -+ di->charge_status = POWER_SUPPLY_STATUS_FULL; -+ } -+ } -+ } -+ else { -+ di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING; -+ di->full_counter = 0; -+ } -+ -+ if (di->charge_status != old_charge_status) -+ power_supply_changed(&di->bat); -+ -+ return; -+} -+ -+static void ds2760_battery_work(struct work_struct *work) -+{ -+ struct ds2760_device_info *di = container_of(work, -+ struct ds2760_device_info, monitor_work.work); -+ const int interval = HZ * 60; -+ -+ dev_dbg(di->dev, "%s\n", __FUNCTION__); -+ -+ ds2760_battery_update_status(di); -+ queue_delayed_work(di->monitor_wqueue, &di->monitor_work, interval); -+ -+ return; -+} -+ -+#define to_ds2760_device_info(x) container_of((x), struct ds2760_device_info, \ -+ bat); -+ -+static void ds2760_battery_external_power_changed(struct power_supply *psy) -+{ -+ struct ds2760_device_info *di = to_ds2760_device_info(psy); -+ -+ dev_dbg(di->dev, "%s\n", __FUNCTION__); -+ -+ cancel_delayed_work(&di->monitor_work); -+ queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10); -+ -+ return; -+} -+ -+static int ds2760_battery_get_property(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ struct ds2760_device_info *di = to_ds2760_device_info(psy); -+ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_STATUS: -+ val->intval = di->charge_status; -+ return 0; -+ default: -+ break; -+ } -+ -+ ds2760_battery_read_status(di); -+ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_VOLTAGE_NOW: -+ val->intval = di->voltage_uV; -+ break; -+ case POWER_SUPPLY_PROP_CURRENT_NOW: -+ val->intval = di->current_uA; -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: -+ val->intval = di->rated_capacity; -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_FULL: -+ val->intval = di->full_active_uAh; -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_EMPTY: -+ val->intval = di->empty_uAh; -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_NOW: -+ val->intval = di->accum_current_uAh; -+ break; -+ case POWER_SUPPLY_PROP_TEMP: -+ val->intval = di->temp_C; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static enum power_supply_property ds2760_battery_props[] = { -+ POWER_SUPPLY_PROP_STATUS, -+ POWER_SUPPLY_PROP_VOLTAGE_NOW, -+ POWER_SUPPLY_PROP_CURRENT_NOW, -+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, -+ POWER_SUPPLY_PROP_CHARGE_FULL, -+ POWER_SUPPLY_PROP_CHARGE_EMPTY, -+ POWER_SUPPLY_PROP_CHARGE_NOW, -+ POWER_SUPPLY_PROP_TEMP, -+}; -+ -+static int ds2760_battery_probe(struct platform_device *pdev) -+{ -+ int retval = 0; -+ struct ds2760_device_info *di; -+ struct ds2760_platform_data *pdata; -+ -+ di = kzalloc(sizeof(*di), GFP_KERNEL); -+ if (!di) { -+ retval = -ENOMEM; -+ goto di_alloc_failed; -+ } -+ -+ platform_set_drvdata(pdev, di); -+ -+ pdata = pdev->dev.platform_data; -+ di->dev = &pdev->dev; -+ di->w1_dev = pdev->dev.parent; -+ di->bat.name = pdev->dev.bus_id; -+ di->bat.type = POWER_SUPPLY_TYPE_BATTERY; -+ di->bat.properties = ds2760_battery_props; -+ di->bat.num_properties = ARRAY_SIZE(ds2760_battery_props); -+ di->bat.get_property = ds2760_battery_get_property; -+ di->bat.external_power_changed = -+ ds2760_battery_external_power_changed; -+ di->bat.use_for_apm = 1; -+ -+ di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN; -+ -+ retval = power_supply_register(&pdev->dev, &di->bat); -+ if (retval) { -+ dev_err(di->dev, "failed to register battery"); -+ goto batt_failed; -+ } -+ -+ INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work); -+ di->monitor_wqueue = create_singlethread_workqueue(pdev->dev.bus_id); -+ if (!di->monitor_wqueue) { -+ retval = -ESRCH; -+ goto workqueue_failed; -+ } -+ queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1); -+ -+ goto success; -+ -+workqueue_failed: -+ power_supply_unregister(&di->bat); -+batt_failed: -+ kfree(di); -+di_alloc_failed: -+success: -+ return retval; -+} -+ -+static int ds2760_battery_remove(struct platform_device *pdev) -+{ -+ struct ds2760_device_info *di = platform_get_drvdata(pdev); -+ -+ cancel_rearming_delayed_workqueue(di->monitor_wqueue, -+ &di->monitor_work); -+ destroy_workqueue(di->monitor_wqueue); -+ power_supply_unregister(&di->bat); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+ -+static int ds2760_battery_suspend(struct platform_device *pdev, -+ pm_message_t state) -+{ -+ struct ds2760_device_info *di = platform_get_drvdata(pdev); -+ -+ di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN; -+ -+ return 0; -+} -+ -+static int ds2760_battery_resume(struct platform_device *pdev) -+{ -+ struct ds2760_device_info *di = platform_get_drvdata(pdev); -+ -+ di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN; -+ power_supply_changed(&di->bat); -+ -+ cancel_delayed_work(&di->monitor_work); -+ queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ); -+ -+ return 0; -+} -+ -+#else -+ -+#define ds2760_battery_suspend NULL -+#define ds2760_battery_resume NULL -+ -+#endif /* CONFIG_PM */ -+ -+static struct platform_driver ds2760_battery_driver = { -+ .driver = { -+ .name = "ds2760-battery", -+ }, -+ .probe = ds2760_battery_probe, -+ .remove = ds2760_battery_remove, -+ .suspend = ds2760_battery_suspend, -+ .resume = ds2760_battery_resume, -+}; -+ -+static int __init ds2760_battery_init(void) -+{ -+ return platform_driver_register(&ds2760_battery_driver); -+} -+ -+static void __exit ds2760_battery_exit(void) -+{ -+ platform_driver_unregister(&ds2760_battery_driver); -+ return; -+} -+ -+module_init(ds2760_battery_init); -+module_exit(ds2760_battery_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Szabolcs Gyurko , " -+ "Matt Reimer , " -+ "Anton Vorontsov "); -+MODULE_DESCRIPTION("ds2760 battery driver"); -Index: linux-2.6.22/drivers/power/Kconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/Kconfig 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,70 @@ -+menuconfig POWER_SUPPLY -+ tristate "Power supply class support" -+ help -+ Say Y here to enable power supply class support. This allows -+ power supply (batteries, AC, USB) monitoring by userspace -+ via sysfs and uevent (if available) and/or APM kernel interface -+ (if selected below). -+ -+if POWER_SUPPLY -+ -+config POWER_SUPPLY_DEBUG -+ bool "Power supply debug" -+ help -+ Say Y here to enable debugging messages for power supply class -+ and drivers. -+ -+config PDA_POWER -+ tristate "Generic PDA/phone power driver" -+ help -+ Say Y here to enable generic power driver for PDAs and phones with -+ one or two external power supplies (AC/USB) connected to main and -+ backup batteries, and optional builtin charger. -+ -+config APM_POWER -+ tristate "APM emulation for class batteries" -+ depends on APM_EMULATION -+ help -+ Say Y here to enable support APM status emulation using -+ battery class devices. -+ -+config BATTERY_DS2760 -+ tristate "DS2760 battery driver (HP iPAQ & others)" -+ select W1 -+ select W1_SLAVE_DS2760 -+ help -+ Say Y here to enable support for batteries with ds2760 chip. -+ -+config BATTERY_PMU -+ tristate "Apple PMU battery" -+ depends on ADB_PMU -+ help -+ Say Y here to expose battery information on Apple machines -+ through the generic battery class. -+ -+config BATTERY_OLPC -+ tristate "One Laptop Per Child battery" -+ depends on X86_32 -+ help -+ Say Y to enable support for the battery on the OLPC laptop. -+ -+# drivers below are not in battery2-2.6 tree -+ -+config ADC_BATTERY -+ tristate "Generic ADC battery driver" -+ depends on ADC && POWER_SUPPLY -+ help -+ Say Y here to enable support for battery monitoring using generic ADC device. -+ -+config IPAQ_MICRO_BATTERY -+ tristate "HP iPAQ Micro ASIC battery driver" -+ depends on IPAQ_MICRO && POWER_SUPPLY -+ help -+ Choose this option if you want to monitor battery status on -+ Compaq/HP iPAQ h3100 h3600 -+ -+config MCP_UCB1x00_SIMPAD_BATTERY -+ tristate "SIMpad Battery Reading Support" -+ depends on MCP_UCB1x00 && POWER_SUPPLY -+ -+endif # POWER_SUPPLY -Index: linux-2.6.22/drivers/power/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/Makefile 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,28 @@ -+power_supply-objs := power_supply_core.o -+ -+ifeq ($(CONFIG_SYSFS),y) -+power_supply-objs += power_supply_sysfs.o -+endif -+ -+ifeq ($(CONFIG_LEDS_TRIGGERS),y) -+power_supply-objs += power_supply_leds.o -+endif -+ -+ifeq ($(CONFIG_POWER_SUPPLY_DEBUG),y) -+EXTRA_CFLAGS += -DDEBUG -+endif -+ -+obj-$(CONFIG_POWER_SUPPLY) += power_supply.o -+ -+obj-$(CONFIG_PDA_POWER) += pda_power.o -+obj-$(CONFIG_APM_POWER) += apm_power.o -+ -+obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o -+obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o -+obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o -+ -+# drivers below are not in battery2-2.6 tree -+ -+obj-$(CONFIG_ADC_BATTERY) += adc_battery.o -+obj-$(CONFIG_IPAQ_MICRO_BATTERY) += micro_battery.o -+obj-$(CONFIG_MCP_UCB1x00_SIMPAD_BATTERY) += simpad-battery.o -Index: linux-2.6.22/drivers/power/micro_battery.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/micro_battery.c 2007-08-23 12:25:20.000000000 +0200 -@@ -0,0 +1,257 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * h3600 atmel micro companion support, battery subdevice -+ * based on previous kernel 2.4 version -+ * Author : Alessandro Gardich -+ * -+ */ -+ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+ -+#include -+ -+#define BATT_PERIOD 10*HZ -+ -+#define H3600_BATT_STATUS_HIGH 0x01 -+#define H3600_BATT_STATUS_LOW 0x02 -+#define H3600_BATT_STATUS_CRITICAL 0x04 -+#define H3600_BATT_STATUS_CHARGING 0x08 -+#define H3600_BATT_STATUS_CHARGEMAIN 0x10 -+#define H3600_BATT_STATUS_DEAD 0x20 /* Battery will not charge */ -+#define H3600_BATT_STATUS_NOTINSTALLED 0x20 /* For expansion pack batteries */ -+#define H3600_BATT_STATUS_FULL 0x40 /* Battery fully charged (and connected to AC) */ -+#define H3600_BATT_STATUS_NOBATTERY 0x80 -+#define H3600_BATT_STATUS_UNKNOWN 0xff -+ -+ -+//static struct power_supply_dev *micro_battery; -+ -+static micro_private_t *p_micro; -+ -+struct timer_list batt_timer; -+ -+struct { -+ int ac; -+ int update_time; -+ int chemistry; -+ int voltage; -+ int temperature; -+ int flag; -+} micro_battery; -+ -+static void micro_battery_receive (int len, unsigned char *data) { -+ if (0) { -+ printk(KERN_ERR "h3600_battery - AC = %02x\n", data[0]); -+ printk(KERN_ERR "h3600_battery - BAT1 chemistry = %02x\n", data[1]); -+ printk(KERN_ERR "h3600_battery - BAT1 voltage = %d %02x%02x\n", (data[3]<<8)+data[2], data[2], data[3]); -+ printk(KERN_ERR "h3600_battery - BAT1 status = %02x\n", data[4]); -+ } -+ -+ micro_battery.ac = data[0]; -+ micro_battery.chemistry = data[1]; -+ micro_battery.voltage = ((((unsigned short)data[3]<<8)+data[2]) * 5000L ) * 1000 / 1024; -+ micro_battery.flag = data[4]; -+ -+ if (len == 9) { -+ if (0) { -+ printk(KERN_ERR "h3600_battery - BAT2 chemistry = %02x\n", data[5]); -+ printk(KERN_ERR "h3600_battery - BAT2 voltage = %d %02x%02x\n", (data[7]<<8)+data[6], data[6], data[7]); -+ printk(KERN_ERR "h3600_battery - BAT2 status = %02x\n", data[8]); -+ } -+ } -+} -+ -+static void micro_temperature_receive (int len, unsigned char *data) { -+ micro_battery.temperature = ((unsigned short)data[1]<<8)+data[0]; -+} -+ -+void h3600_battery_read_status(unsigned long data) { -+ -+ if (++data % 2) -+ h3600_micro_tx_msg(0x09,0,NULL); -+ else -+ h3600_micro_tx_msg(0x06,0,NULL); -+ -+ batt_timer.expires += BATT_PERIOD; -+ batt_timer.data = data; -+ -+ add_timer(&batt_timer); -+} -+ -+int get_capacity(struct power_supply *b) { -+ switch (micro_battery.flag) { -+ case H3600_BATT_STATUS_HIGH : return 100; break; -+ case H3600_BATT_STATUS_LOW : return 50; break; -+ case H3600_BATT_STATUS_CRITICAL : return 5; break; -+ default: break; -+ } -+ return 0; -+} -+ -+int get_status(struct power_supply *b) { -+ -+ if (micro_battery.flag == H3600_BATT_STATUS_UNKNOWN) -+ return POWER_SUPPLY_STATUS_UNKNOWN; -+ -+ if (micro_battery.flag & H3600_BATT_STATUS_FULL) -+ return POWER_SUPPLY_STATUS_FULL; -+ -+ if ((micro_battery.flag & H3600_BATT_STATUS_CHARGING) || -+ (micro_battery.flag & H3600_BATT_STATUS_CHARGEMAIN)) -+ return POWER_SUPPLY_STATUS_CHARGING; -+ -+ return POWER_SUPPLY_STATUS_DISCHARGING; -+} -+ -+static int micro_batt_get_property(struct power_supply *b, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_STATUS: -+ val->intval = get_status(b); -+ break; -+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: -+ val->intval = 4700000; -+ break; -+ case POWER_SUPPLY_PROP_CAPACITY: -+ val->intval = get_capacity(b); -+ break; -+ case POWER_SUPPLY_PROP_TEMP: -+ val->intval = micro_battery.temperature; -+ break; -+ case POWER_SUPPLY_PROP_VOLTAGE_NOW: -+ val->intval = micro_battery.voltage; -+ break; -+ default: -+ return -EINVAL; -+ }; -+ -+ return 0; -+} -+ -+static enum power_supply_property micro_batt_props[] = { -+ POWER_SUPPLY_PROP_STATUS, -+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, -+ POWER_SUPPLY_PROP_CAPACITY, -+ POWER_SUPPLY_PROP_TEMP, -+ POWER_SUPPLY_PROP_VOLTAGE_NOW, -+}; -+ -+static struct power_supply h3600_battery = { -+ .name = "main-battery", -+ .properties = micro_batt_props, -+ .num_properties = ARRAY_SIZE(micro_batt_props), -+ .get_property = micro_batt_get_property, -+ .use_for_apm = 1, -+}; -+ -+static int micro_batt_probe (struct platform_device *pdev) -+{ -+ if (1) printk(KERN_ERR "micro battery probe : begin\n"); -+ -+ power_supply_register(&pdev->dev, &h3600_battery); -+ -+ { /*--- callback ---*/ -+ p_micro = platform_get_drvdata(pdev); -+ spin_lock(p_micro->lock); -+ p_micro->h_batt = micro_battery_receive; -+ p_micro->h_temp = micro_temperature_receive; -+ spin_unlock(p_micro->lock); -+ } -+ -+ { /*--- timer ---*/ -+ init_timer(&batt_timer); -+ batt_timer.expires = jiffies + BATT_PERIOD; -+ batt_timer.data = 0; -+ batt_timer.function = h3600_battery_read_status; -+ -+ add_timer(&batt_timer); -+ } -+ -+ if (1) printk(KERN_ERR "micro battery probe : end\n"); -+ return 0; -+} -+ -+static int micro_batt_remove (struct platform_device *pdev) -+{ -+ power_supply_unregister(&h3600_battery); -+ { /*--- callback ---*/ -+ init_timer(&batt_timer); -+ p_micro->h_batt = NULL; -+ p_micro->h_temp = NULL; -+ spin_unlock(p_micro->lock); -+ } -+ { /*--- timer ---*/ -+ del_timer_sync(&batt_timer); -+ } -+ return 0; -+} -+ -+static int micro_batt_suspend ( struct platform_device *pdev, pm_message_t state) -+{ -+ { /*--- timer ---*/ -+ del_timer(&batt_timer); -+ } -+ return 0; -+} -+ -+static int micro_batt_resume ( struct platform_device *pdev) -+{ -+ { /*--- timer ---*/ -+ add_timer(&batt_timer); -+ } -+ return 0; -+} -+ -+struct platform_driver micro_batt_device_driver = { -+ .driver = { -+ .name = "h3600-micro-battery", -+ }, -+ .probe = micro_batt_probe, -+ .remove = micro_batt_remove, -+ .suspend = micro_batt_suspend, -+ .resume = micro_batt_resume, -+}; -+ -+static int micro_batt_init (void) -+{ -+ return platform_driver_register(µ_batt_device_driver); -+} -+ -+static void micro_batt_cleanup (void) -+{ -+ platform_driver_unregister (µ_batt_device_driver); -+} -+ -+module_init (micro_batt_init); -+module_exit (micro_batt_cleanup); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("gremlin.it"); -+MODULE_DESCRIPTION("driver for iPAQ Atmel micro battery"); -+ -+ -Index: linux-2.6.22/drivers/power/olpc_battery.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/olpc_battery.c 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,302 @@ -+/* -+ * Battery driver for One Laptop Per Child board. -+ * -+ * Copyright © 2006 David Woodhouse -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define wBAT_VOLTAGE 0xf900 /* *9.76/32, mV */ -+#define wBAT_CURRENT 0xf902 /* *15.625/120, mA */ -+#define wBAT_TEMP 0xf906 /* *256/1000, °C */ -+#define wAMB_TEMP 0xf908 /* *256/1000, °C */ -+#define SOC 0xf910 /* percentage */ -+#define sMBAT_STATUS 0xfaa4 -+#define sBAT_PRESENT 1 -+#define sBAT_FULL 2 -+#define sBAT_DESTROY 4 /* what is this exactly? */ -+#define sBAT_LOW 32 -+#define sBAT_DISCHG 64 -+#define sMCHARGE_STATUS 0xfaa5 -+#define sBAT_CHARGE 1 -+#define sBAT_OVERTEMP 4 -+#define sBAT_NiMH 8 -+#define sPOWER_FLAG 0xfa40 -+#define ADAPTER_IN 1 -+ -+/********************************************************************* -+ * EC locking and access -+ *********************************************************************/ -+ -+static int lock_ec(void) -+{ -+ unsigned long timeo = jiffies + HZ / 20; -+ -+ while (1) { -+ unsigned char lock = inb(0x6c) & 0x80; -+ if (!lock) -+ return 0; -+ if (time_after(jiffies, timeo)) { -+ printk(KERN_ERR "olpc_battery: failed to lock EC for " -+ "battery access\n"); -+ return 1; -+ } -+ yield(); -+ } -+} -+ -+static void unlock_ec(void) -+{ -+ outb(0xff, 0x6c); -+ return; -+} -+ -+static unsigned char read_ec_byte(unsigned short adr) -+{ -+ outb(adr >> 8, 0x381); -+ outb(adr, 0x382); -+ return inb(0x383); -+} -+ -+static unsigned short read_ec_word(unsigned short adr) -+{ -+ return (read_ec_byte(adr) << 8) | read_ec_byte(adr + 1); -+} -+ -+/********************************************************************* -+ * Power -+ *********************************************************************/ -+ -+static int olpc_ac_get_prop(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ int ret = 0; -+ -+ if (lock_ec()) -+ return -EIO; -+ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_ONLINE: -+ if (!(read_ec_byte(sMBAT_STATUS) & sBAT_PRESENT)) { -+ ret = -ENODEV; -+ goto out; -+ } -+ val->intval = !!(read_ec_byte(sPOWER_FLAG) & ADAPTER_IN); -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } -+out: -+ unlock_ec(); -+ return ret; -+} -+ -+static enum power_supply_property olpc_ac_props[] = { -+ POWER_SUPPLY_PROP_ONLINE, -+}; -+ -+static struct power_supply olpc_ac = { -+ .name = "olpc-ac", -+ .type = POWER_SUPPLY_TYPE_MAINS, -+ .properties = olpc_ac_props, -+ .num_properties = ARRAY_SIZE(olpc_ac_props), -+ .get_property = olpc_ac_get_prop, -+}; -+ -+/********************************************************************* -+ * Battery properties -+ *********************************************************************/ -+ -+static int olpc_bat_get_property(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ int ret = 0; -+ -+ if (lock_ec()) -+ return -EIO; -+ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_STATUS: -+ { -+ int status = POWER_SUPPLY_STATUS_UNKNOWN; -+ -+ val->intval = read_ec_byte(sMBAT_STATUS); -+ -+ if (!(val->intval & sBAT_PRESENT)) { -+ ret = -ENODEV; -+ goto out; -+ } -+ -+ if (val->intval & sBAT_DISCHG) -+ status = POWER_SUPPLY_STATUS_DISCHARGING; -+ else if (val->intval & sBAT_FULL) -+ status = POWER_SUPPLY_STATUS_FULL; -+ -+ val->intval = read_ec_byte(sMCHARGE_STATUS); -+ if (val->intval & sBAT_CHARGE) -+ status = POWER_SUPPLY_STATUS_CHARGING; -+ -+ val->intval = status; -+ break; -+ } -+ case POWER_SUPPLY_PROP_PRESENT: -+ val->intval = !!(read_ec_byte(sMBAT_STATUS) & sBAT_PRESENT); -+ break; -+ case POWER_SUPPLY_PROP_HEALTH: -+ val->intval = read_ec_byte(sMCHARGE_STATUS); -+ if (val->intval & sBAT_OVERTEMP) -+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; -+ else -+ val->intval = POWER_SUPPLY_HEALTH_GOOD; -+ break; -+ case POWER_SUPPLY_PROP_TECHNOLOGY: -+ val->intval = read_ec_byte(sMCHARGE_STATUS); -+ if (val->intval & sBAT_NiMH) -+ val->intval = POWER_SUPPLY_TECHNOLOGY_NIMH; -+ else -+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; -+ break; -+ case POWER_SUPPLY_PROP_VOLTAGE_AVG: -+ val->intval = read_ec_byte(wBAT_VOLTAGE) * 9760L / 32; -+ break; -+ case POWER_SUPPLY_PROP_CURRENT_AVG: -+ val->intval = read_ec_byte(wBAT_CURRENT) * 15625L / 120; -+ break; -+ case POWER_SUPPLY_PROP_CAPACITY: -+ val->intval = read_ec_byte(SOC); -+ break; -+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL: -+ val->intval = read_ec_byte(sMBAT_STATUS); -+ if (val->intval & sBAT_FULL) -+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL; -+ else if (val->intval & sBAT_LOW) -+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW; -+ else -+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; -+ break; -+ case POWER_SUPPLY_PROP_TEMP: -+ val->intval = read_ec_byte(wBAT_TEMP) * 256 / 100; -+ break; -+ case POWER_SUPPLY_PROP_TEMP_AMBIENT: -+ val->intval = read_ec_byte(wAMB_TEMP) * 256 / 100; -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ -+out: -+ unlock_ec(); -+ return ret; -+} -+ -+static enum power_supply_property olpc_bat_props[] = { -+ POWER_SUPPLY_PROP_STATUS, -+ POWER_SUPPLY_PROP_PRESENT, -+ POWER_SUPPLY_PROP_HEALTH, -+ POWER_SUPPLY_PROP_TECHNOLOGY, -+ POWER_SUPPLY_PROP_VOLTAGE_AVG, -+ POWER_SUPPLY_PROP_CURRENT_AVG, -+ POWER_SUPPLY_PROP_CAPACITY, -+ POWER_SUPPLY_PROP_CAPACITY_LEVEL, -+ POWER_SUPPLY_PROP_TEMP, -+ POWER_SUPPLY_PROP_TEMP_AMBIENT, -+}; -+ -+/********************************************************************* -+ * Initialisation -+ *********************************************************************/ -+ -+static struct platform_device *bat_pdev; -+ -+static struct power_supply olpc_bat = { -+ .properties = olpc_bat_props, -+ .num_properties = ARRAY_SIZE(olpc_bat_props), -+ .get_property = olpc_bat_get_property, -+ .use_for_apm = 1, -+}; -+ -+static int __init olpc_bat_init(void) -+{ -+ int ret = 0; -+ unsigned short tmp; -+ -+ if (!request_region(0x380, 4, "olpc-battery")) { -+ ret = -EIO; -+ goto region_failed; -+ } -+ -+ if (lock_ec()) { -+ ret = -EIO; -+ goto lock_failed; -+ } -+ -+ tmp = read_ec_word(0xfe92); -+ unlock_ec(); -+ -+ if (tmp != 0x380) { -+ /* Doesn't look like OLPC EC */ -+ ret = -ENODEV; -+ goto not_olpc_ec; -+ } -+ -+ bat_pdev = platform_device_register_simple("olpc-battery", 0, NULL, 0); -+ if (IS_ERR(bat_pdev)) { -+ ret = PTR_ERR(bat_pdev); -+ goto pdev_failed; -+ } -+ -+ ret = power_supply_register(&bat_pdev->dev, &olpc_ac); -+ if (ret) -+ goto ac_failed; -+ -+ olpc_bat.name = bat_pdev->name; -+ -+ ret = power_supply_register(&bat_pdev->dev, &olpc_bat); -+ if (ret) -+ goto battery_failed; -+ -+ goto success; -+ -+battery_failed: -+ power_supply_unregister(&olpc_ac); -+ac_failed: -+ platform_device_unregister(bat_pdev); -+pdev_failed: -+not_olpc_ec: -+lock_failed: -+ release_region(0x380, 4); -+region_failed: -+success: -+ return ret; -+} -+ -+static void __exit olpc_bat_exit(void) -+{ -+ power_supply_unregister(&olpc_bat); -+ power_supply_unregister(&olpc_ac); -+ platform_device_unregister(bat_pdev); -+ release_region(0x380, 4); -+ return; -+} -+ -+module_init(olpc_bat_init); -+module_exit(olpc_bat_exit); -+ -+MODULE_AUTHOR("David Woodhouse "); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("Battery driver for One Laptop Per Child " -+ "($100 laptop) board."); -Index: linux-2.6.22/drivers/power/pda_power.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/pda_power.c 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,263 @@ -+/* -+ * Common power driver for PDAs and phones with one or two external -+ * power supplies (AC/USB) connected to main and backup batteries, -+ * and optional builtin charger. -+ * -+ * Copyright 2007 Anton Vorontsov -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static inline unsigned int get_irq_flags(struct resource *res) -+{ -+ unsigned int flags = IRQF_DISABLED | IRQF_SHARED; -+ -+ flags |= res->flags & IRQF_TRIGGER_MASK; -+ -+ return flags; -+} -+ -+static struct device *dev; -+static struct pda_power_pdata *pdata; -+static struct resource *ac_irq, *usb_irq; -+static struct timer_list charger_timer; -+static struct timer_list supply_timer; -+ -+static int pda_power_get_property(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_ONLINE: -+ if (psy->type == POWER_SUPPLY_TYPE_MAINS) -+ val->intval = pdata->is_ac_online ? -+ pdata->is_ac_online() : 0; -+ else -+ val->intval = pdata->is_usb_online ? -+ pdata->is_usb_online() : 0; -+ break; -+ default: -+ return -EINVAL; -+ } -+ return 0; -+} -+ -+static enum power_supply_property pda_power_props[] = { -+ POWER_SUPPLY_PROP_ONLINE, -+}; -+ -+static char *pda_power_supplied_to[] = { -+ "main-battery", -+ "backup-battery", -+}; -+ -+static struct power_supply pda_power_supplies[] = { -+ { -+ .name = "ac", -+ .type = POWER_SUPPLY_TYPE_MAINS, -+ .supplied_to = pda_power_supplied_to, -+ .num_supplicants = ARRAY_SIZE(pda_power_supplied_to), -+ .properties = pda_power_props, -+ .num_properties = ARRAY_SIZE(pda_power_props), -+ .get_property = pda_power_get_property, -+ }, -+ { -+ .name = "usb", -+ .type = POWER_SUPPLY_TYPE_USB, -+ .supplied_to = pda_power_supplied_to, -+ .num_supplicants = ARRAY_SIZE(pda_power_supplied_to), -+ .properties = pda_power_props, -+ .num_properties = ARRAY_SIZE(pda_power_props), -+ .get_property = pda_power_get_property, -+ }, -+}; -+ -+static void update_charger(void) -+{ -+ if (!pdata->set_charge) -+ return; -+ -+ if (pdata->is_ac_online && pdata->is_ac_online()) { -+ dev_dbg(dev, "charger on (AC)\n"); -+ pdata->set_charge(PDA_POWER_CHARGE_AC); -+ } -+ else if (pdata->is_usb_online && pdata->is_usb_online()) { -+ dev_dbg(dev, "charger on (USB)\n"); -+ pdata->set_charge(PDA_POWER_CHARGE_USB); -+ } -+ else { -+ dev_dbg(dev, "charger off\n"); -+ pdata->set_charge(0); -+ } -+ -+ return; -+} -+ -+static void supply_timer_func(unsigned long irq) -+{ -+ if (ac_irq && irq == ac_irq->start) -+ power_supply_changed(&pda_power_supplies[0]); -+ else if (usb_irq && irq == usb_irq->start) -+ power_supply_changed(&pda_power_supplies[1]); -+ return; -+} -+ -+static void charger_timer_func(unsigned long irq) -+{ -+ update_charger(); -+ -+ /* Okay, charger set. Now wait a bit before notifying supplicants, -+ * charge power should stabilize. */ -+ supply_timer.data = irq; -+ mod_timer(&supply_timer, -+ jiffies + msecs_to_jiffies(pdata->wait_for_charger)); -+ return; -+} -+ -+static irqreturn_t power_changed_isr(int irq, void *unused) -+{ -+ /* Wait a bit before reading ac/usb line status and setting charger, -+ * because ac/usb status readings may lag from irq. */ -+ charger_timer.data = irq; -+ mod_timer(&charger_timer, -+ jiffies + msecs_to_jiffies(pdata->wait_for_status)); -+ return IRQ_HANDLED; -+} -+ -+static int pda_power_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ -+ dev = &pdev->dev; -+ -+ if (pdev->id != -1) { -+ dev_err(dev, "it's meaningless to register several " -+ "pda_powers, use id = -1\n"); -+ ret = -EINVAL; -+ goto wrongid; -+ } -+ -+ pdata = pdev->dev.platform_data; -+ -+ update_charger(); -+ -+ if (!pdata->wait_for_status) -+ pdata->wait_for_status = 500; -+ -+ if (!pdata->wait_for_charger) -+ pdata->wait_for_charger = 500; -+ -+ setup_timer(&charger_timer, charger_timer_func, 0); -+ setup_timer(&supply_timer, supply_timer_func, 0); -+ -+ ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac"); -+ usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb"); -+ if (!ac_irq && !usb_irq) { -+ dev_err(dev, "no ac/usb irq specified\n"); -+ ret = -ENODEV; -+ goto noirqs; -+ } -+ -+ if (pdata->supplied_to) { -+ pda_power_supplies[0].supplied_to = pdata->supplied_to; -+ pda_power_supplies[1].supplied_to = pdata->supplied_to; -+ pda_power_supplies[0].num_supplicants = pdata->num_supplicants; -+ pda_power_supplies[1].num_supplicants = pdata->num_supplicants; -+ } -+ -+ ret = power_supply_register(&pdev->dev, &pda_power_supplies[0]); -+ if (ret) { -+ dev_err(dev, "failed to register %s power supply\n", -+ pda_power_supplies[0].name); -+ goto supply0_failed; -+ } -+ -+ ret = power_supply_register(&pdev->dev, &pda_power_supplies[1]); -+ if (ret) { -+ dev_err(dev, "failed to register %s power supply\n", -+ pda_power_supplies[1].name); -+ goto supply1_failed; -+ } -+ -+ if (ac_irq) { -+ ret = request_irq(ac_irq->start, power_changed_isr, -+ get_irq_flags(ac_irq), ac_irq->name, -+ &pda_power_supplies[0]); -+ if (ret) { -+ dev_err(dev, "request ac irq failed\n"); -+ goto ac_irq_failed; -+ } -+ } -+ -+ if (usb_irq) { -+ ret = request_irq(usb_irq->start, power_changed_isr, -+ get_irq_flags(usb_irq), usb_irq->name, -+ &pda_power_supplies[1]); -+ if (ret) { -+ dev_err(dev, "request usb irq failed\n"); -+ goto usb_irq_failed; -+ } -+ } -+ -+ goto success; -+ -+usb_irq_failed: -+ if (ac_irq) -+ free_irq(ac_irq->start, &pda_power_supplies[0]); -+ac_irq_failed: -+ power_supply_unregister(&pda_power_supplies[1]); -+supply1_failed: -+ power_supply_unregister(&pda_power_supplies[0]); -+supply0_failed: -+noirqs: -+wrongid: -+success: -+ return ret; -+} -+ -+static int pda_power_remove(struct platform_device *pdev) -+{ -+ if (usb_irq) -+ free_irq(usb_irq->start, &pda_power_supplies[1]); -+ if (ac_irq) -+ free_irq(ac_irq->start, &pda_power_supplies[0]); -+ del_timer_sync(&charger_timer); -+ del_timer_sync(&supply_timer); -+ power_supply_unregister(&pda_power_supplies[1]); -+ power_supply_unregister(&pda_power_supplies[0]); -+ return 0; -+} -+ -+static struct platform_driver pda_power_pdrv = { -+ .driver = { -+ .name = "pda-power", -+ }, -+ .probe = pda_power_probe, -+ .remove = pda_power_remove, -+}; -+ -+static int __init pda_power_init(void) -+{ -+ return platform_driver_register(&pda_power_pdrv); -+} -+ -+static void __exit pda_power_exit(void) -+{ -+ platform_driver_unregister(&pda_power_pdrv); -+ return; -+} -+ -+module_init(pda_power_init); -+module_exit(pda_power_exit); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Anton Vorontsov "); -Index: linux-2.6.22/drivers/power/pmu_battery.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/pmu_battery.c 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,215 @@ -+/* -+ * Battery class driver for Apple PMU -+ * -+ * Copyright © 2006 David Woodhouse -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static struct pmu_battery_dev { -+ struct power_supply bat; -+ struct pmu_battery_info *pbi; -+ char name[16]; -+ int propval; -+} *pbats[PMU_MAX_BATTERIES]; -+ -+#define to_pmu_battery_dev(x) container_of(x, struct pmu_battery_dev, bat) -+ -+/********************************************************************* -+ * Power -+ *********************************************************************/ -+ -+static int pmu_get_ac_prop(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_ONLINE: -+ val->intval = (!!(pmu_power_flags & PMU_PWR_AC_PRESENT)) || -+ (pmu_battery_count == 0); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static enum power_supply_property pmu_ac_props[] = { -+ POWER_SUPPLY_PROP_ONLINE, -+}; -+ -+static struct power_supply pmu_ac = { -+ .name = "pmu-ac", -+ .type = POWER_SUPPLY_TYPE_MAINS, -+ .properties = pmu_ac_props, -+ .num_properties = ARRAY_SIZE(pmu_ac_props), -+ .get_property = pmu_get_ac_prop, -+}; -+ -+/********************************************************************* -+ * Battery properties -+ *********************************************************************/ -+ -+static char *pmu_batt_types[] = { -+ "Smart", "Comet", "Hooper", "Unknown" -+}; -+ -+static char *pmu_bat_get_model_name(struct pmu_battery_info *pbi) -+{ -+ switch (pbi->flags & PMU_BATT_TYPE_MASK) { -+ case PMU_BATT_TYPE_SMART: -+ return pmu_batt_types[0]; -+ case PMU_BATT_TYPE_COMET: -+ return pmu_batt_types[1]; -+ case PMU_BATT_TYPE_HOOPER: -+ return pmu_batt_types[2]; -+ default: break; -+ } -+ return pmu_batt_types[3]; -+} -+ -+static int pmu_bat_get_property(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ struct pmu_battery_dev *pbat = to_pmu_battery_dev(psy); -+ struct pmu_battery_info *pbi = pbat->pbi; -+ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_STATUS: -+ if (pbi->flags & PMU_BATT_CHARGING) -+ val->intval = POWER_SUPPLY_STATUS_CHARGING; -+ else -+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING; -+ break; -+ case POWER_SUPPLY_PROP_PRESENT: -+ val->intval = !!(pbi->flags & PMU_BATT_PRESENT); -+ break; -+ case POWER_SUPPLY_PROP_MODEL_NAME: -+ val->strval = pmu_bat_get_model_name(pbi); -+ break; -+ case POWER_SUPPLY_PROP_ENERGY_AVG: -+ val->intval = pbi->charge * 1000; /* mWh -> µWh */ -+ break; -+ case POWER_SUPPLY_PROP_ENERGY_FULL: -+ val->intval = pbi->max_charge * 1000; /* mWh -> µWh */ -+ break; -+ case POWER_SUPPLY_PROP_CURRENT_AVG: -+ val->intval = pbi->amperage * 1000; /* mA -> µA */ -+ break; -+ case POWER_SUPPLY_PROP_VOLTAGE_AVG: -+ val->intval = pbi->voltage * 1000; /* mV -> µV */ -+ break; -+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: -+ val->intval = pbi->time_remaining; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static enum power_supply_property pmu_bat_props[] = { -+ POWER_SUPPLY_PROP_STATUS, -+ POWER_SUPPLY_PROP_PRESENT, -+ POWER_SUPPLY_PROP_MODEL_NAME, -+ POWER_SUPPLY_PROP_ENERGY_AVG, -+ POWER_SUPPLY_PROP_ENERGY_FULL, -+ POWER_SUPPLY_PROP_CURRENT_AVG, -+ POWER_SUPPLY_PROP_VOLTAGE_AVG, -+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, -+}; -+ -+/********************************************************************* -+ * Initialisation -+ *********************************************************************/ -+ -+static struct platform_device *bat_pdev; -+ -+static int __init pmu_bat_init(void) -+{ -+ int ret; -+ int i; -+ -+ bat_pdev = platform_device_register_simple("pmu-battery", -+ 0, NULL, 0); -+ if (IS_ERR(bat_pdev)) { -+ ret = PTR_ERR(bat_pdev); -+ goto pdev_register_failed; -+ } -+ -+ ret = power_supply_register(&bat_pdev->dev, &pmu_ac); -+ if (ret) -+ goto ac_register_failed; -+ -+ for (i = 0; i < pmu_battery_count; i++) { -+ struct pmu_battery_dev *pbat = kzalloc(sizeof(*pbat), -+ GFP_KERNEL); -+ if (!pbat) -+ break; -+ -+ sprintf(pbat->name, "PMU battery %d", i); -+ pbat->bat.name = pbat->name; -+ pbat->bat.properties = pmu_bat_props; -+ pbat->bat.num_properties = ARRAY_SIZE(pmu_bat_props); -+ pbat->bat.get_property = pmu_bat_get_property; -+ pbat->pbi = &pmu_batteries[i]; -+ -+ ret = power_supply_register(&bat_pdev->dev, &pbat->bat); -+ if (ret) { -+ kfree(pbat); -+ goto battery_register_failed; -+ } -+ pbats[i] = pbat; -+ } -+ -+ goto success; -+ -+battery_register_failed: -+ while (i--) { -+ if (!pbats[i]) -+ continue; -+ power_supply_unregister(&pbats[i]->bat); -+ kfree(pbats[i]); -+ } -+ power_supply_unregister(&pmu_ac); -+ac_register_failed: -+ platform_device_unregister(bat_pdev); -+pdev_register_failed: -+success: -+ return ret; -+} -+ -+static void __exit pmu_bat_exit(void) -+{ -+ int i; -+ -+ for (i = 0; i < PMU_MAX_BATTERIES; i++) { -+ if (!pbats[i]) -+ continue; -+ power_supply_unregister(&pbats[i]->bat); -+ kfree(pbats[i]); -+ } -+ power_supply_unregister(&pmu_ac); -+ platform_device_unregister(bat_pdev); -+ -+ return; -+} -+ -+module_init(pmu_bat_init); -+module_exit(pmu_bat_exit); -+ -+MODULE_AUTHOR("David Woodhouse "); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("PMU battery driver"); -Index: linux-2.6.22/drivers/power/power_supply_core.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/power_supply_core.c 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,168 @@ -+/* -+ * Universal power supply monitor class -+ * -+ * Copyright (c) 2007 Anton Vorontsov -+ * Copyright (c) 2004 Szabolcs Gyurko -+ * Copyright (c) 2003 Ian Molton -+ * -+ * Modified: 2004, Oct Szabolcs Gyurko -+ * -+ * You may use this code as per GPL version 2 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include "power_supply.h" -+ -+struct class *power_supply_class; -+ -+static void power_supply_changed_work(struct work_struct *work) -+{ -+ struct power_supply *psy = container_of(work, struct power_supply, -+ changed_work); -+ int i; -+ -+ dev_dbg(psy->dev, "%s\n", __FUNCTION__); -+ -+ for (i = 0; i < psy->num_supplicants; i++) { -+ struct device *dev; -+ -+ down(&power_supply_class->sem); -+ list_for_each_entry(dev, &power_supply_class->devices, node) { -+ struct power_supply *pst = dev_get_drvdata(dev); -+ -+ if (!strcmp(psy->supplied_to[i], pst->name)) { -+ if (pst->external_power_changed) -+ pst->external_power_changed(pst); -+ } -+ } -+ up(&power_supply_class->sem); -+ } -+ -+ power_supply_update_leds(psy); -+ -+ kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE); -+ -+ return; -+} -+ -+void power_supply_changed(struct power_supply *psy) -+{ -+ dev_dbg(psy->dev, "%s\n", __FUNCTION__); -+ -+ schedule_work(&psy->changed_work); -+ -+ return; -+} -+ -+int power_supply_am_i_supplied(struct power_supply *psy) -+{ -+ union power_supply_propval ret = {0,}; -+ struct device *dev; -+ -+ down(&power_supply_class->sem); -+ list_for_each_entry(dev, &power_supply_class->devices, node) { -+ struct power_supply *epsy = dev_get_drvdata(dev); -+ int i; -+ -+ for (i = 0; i < epsy->num_supplicants; i++) { -+ if (!strcmp(epsy->supplied_to[i], psy->name)) { -+ if (epsy->get_property(epsy, -+ POWER_SUPPLY_PROP_ONLINE, &ret)) -+ continue; -+ if (ret.intval) -+ goto out; -+ } -+ } -+ } -+out: -+ up(&power_supply_class->sem); -+ -+ dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, ret.intval); -+ -+ return ret.intval; -+} -+ -+int power_supply_register(struct device *parent, struct power_supply *psy) -+{ -+ int rc = 0; -+ -+ psy->dev = device_create(power_supply_class, parent, 0, -+ "%s", psy->name); -+ if (IS_ERR(psy->dev)) { -+ rc = PTR_ERR(psy->dev); -+ goto dev_create_failed; -+ } -+ -+ dev_set_drvdata(psy->dev, psy); -+ -+ INIT_WORK(&psy->changed_work, power_supply_changed_work); -+ -+ rc = power_supply_create_attrs(psy); -+ if (rc) -+ goto create_attrs_failed; -+ -+ rc = power_supply_create_triggers(psy); -+ if (rc) -+ goto create_triggers_failed; -+ -+ power_supply_changed(psy); -+ -+ goto success; -+ -+create_triggers_failed: -+ power_supply_remove_attrs(psy); -+create_attrs_failed: -+ device_unregister(psy->dev); -+dev_create_failed: -+success: -+ return rc; -+} -+ -+void power_supply_unregister(struct power_supply *psy) -+{ -+ flush_scheduled_work(); -+ power_supply_remove_triggers(psy); -+ power_supply_remove_attrs(psy); -+ device_unregister(psy->dev); -+ return; -+} -+ -+static int __init power_supply_class_init(void) -+{ -+ power_supply_class = class_create(THIS_MODULE, "power_supply"); -+ -+ if (IS_ERR(power_supply_class)) -+ return PTR_ERR(power_supply_class); -+ -+ power_supply_class->dev_uevent = power_supply_uevent; -+ -+ return 0; -+} -+ -+static void __exit power_supply_class_exit(void) -+{ -+ class_destroy(power_supply_class); -+ return; -+} -+ -+EXPORT_SYMBOL_GPL(power_supply_changed); -+EXPORT_SYMBOL_GPL(power_supply_am_i_supplied); -+EXPORT_SYMBOL_GPL(power_supply_register); -+EXPORT_SYMBOL_GPL(power_supply_unregister); -+ -+/* exported for the APM Power driver, APM emulation */ -+EXPORT_SYMBOL_GPL(power_supply_class); -+ -+subsys_initcall(power_supply_class_init); -+module_exit(power_supply_class_exit); -+ -+MODULE_DESCRIPTION("Universal power supply monitor class"); -+MODULE_AUTHOR("Ian Molton , " -+ "Szabolcs Gyurko, " -+ "Anton Vorontsov "); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.22/drivers/power/power_supply.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/power_supply.h 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,42 @@ -+/* -+ * Functions private to power supply class -+ * -+ * Copyright (c) 2007 Anton Vorontsov -+ * Copyright (c) 2004 Szabolcs Gyurko -+ * Copyright (c) 2003 Ian Molton -+ * -+ * Modified: 2004, Oct Szabolcs Gyurko -+ * -+ * You may use this code as per GPL version 2 -+ */ -+ -+#ifdef CONFIG_SYSFS -+ -+extern int power_supply_create_attrs(struct power_supply *psy); -+extern void power_supply_remove_attrs(struct power_supply *psy); -+extern int power_supply_uevent(struct device *dev, char **envp, int num_envp, -+ char *buffer, int buffer_size); -+ -+#else -+ -+static inline int power_supply_create_attrs(struct power_supply *psy) -+{ return 0; } -+static inline void power_supply_remove_attrs(struct power_supply *psy) {} -+#define power_supply_uevent NULL -+ -+#endif /* CONFIG_SYSFS */ -+ -+#ifdef CONFIG_LEDS_TRIGGERS -+ -+extern void power_supply_update_leds(struct power_supply *psy); -+extern int power_supply_create_triggers(struct power_supply *psy); -+extern void power_supply_remove_triggers(struct power_supply *psy); -+ -+#else -+ -+static inline void power_supply_update_leds(struct power_supply *psy) {} -+static inline int power_supply_create_triggers(struct power_supply *psy) -+{ return 0; } -+static inline void power_supply_remove_triggers(struct power_supply *psy) {} -+ -+#endif /* CONFIG_LEDS_TRIGGERS */ -Index: linux-2.6.22/drivers/power/power_supply_leds.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/power_supply_leds.c 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,188 @@ -+/* -+ * LEDs triggers for power supply class -+ * -+ * Copyright (c) 2007 Anton Vorontsov -+ * Copyright (c) 2004 Szabolcs Gyurko -+ * Copyright (c) 2003 Ian Molton -+ * -+ * Modified: 2004, Oct Szabolcs Gyurko -+ * -+ * You may use this code as per GPL version 2 -+ */ -+ -+#include -+ -+/* If we have hwtimer trigger, then use it to blink charging LED */ -+ -+#if defined(CONFIG_LEDS_TRIGGER_HWTIMER) || \ -+ (defined(CONFIG_BATTERY_MODULE) && \ -+ defined(CONFIG_LEDS_TRIGGER_HWTIMER_MODULE)) -+ #define led_trigger_register_charging led_trigger_register_hwtimer -+ #define led_trigger_unregister_charging led_trigger_unregister_hwtimer -+#else -+ #define led_trigger_register_charging led_trigger_register_simple -+ #define led_trigger_unregister_charging led_trigger_unregister_simple -+#endif -+ -+/* Battery specific LEDs triggers. */ -+ -+static void power_supply_update_bat_leds(struct power_supply *psy) -+{ -+ union power_supply_propval status; -+ -+ if (psy->get_property(psy, POWER_SUPPLY_PROP_STATUS, &status)) -+ return; -+ -+ dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, status.intval); -+ -+ switch(status.intval) { -+ case POWER_SUPPLY_STATUS_FULL: -+ led_trigger_event(psy->charging_full_trig, LED_FULL); -+ led_trigger_event(psy->charging_trig, LED_OFF); -+ led_trigger_event(psy->full_trig, LED_FULL); -+ break; -+ case POWER_SUPPLY_STATUS_CHARGING: -+ led_trigger_event(psy->charging_full_trig, LED_FULL); -+ led_trigger_event(psy->charging_trig, LED_FULL); -+ led_trigger_event(psy->full_trig, LED_OFF); -+ break; -+ default: -+ led_trigger_event(psy->charging_full_trig, LED_OFF); -+ led_trigger_event(psy->charging_trig, LED_OFF); -+ led_trigger_event(psy->full_trig, LED_OFF); -+ break; -+ } -+ -+ return; -+} -+ -+static int power_supply_create_bat_triggers(struct power_supply *psy) -+{ -+ int rc = 0; -+ -+ psy->charging_full_trig_name = kmalloc(strlen(psy->name) + -+ sizeof("-charging-or-full"), GFP_KERNEL); -+ if (!psy->charging_full_trig_name) -+ goto charging_full_failed; -+ -+ psy->charging_trig_name = kmalloc(strlen(psy->name) + -+ sizeof("-charging"), GFP_KERNEL); -+ if (!psy->charging_trig_name) -+ goto charging_failed; -+ -+ psy->full_trig_name = kmalloc(strlen(psy->name) + -+ sizeof("-full"), GFP_KERNEL); -+ if (!psy->full_trig_name) -+ goto full_failed; -+ -+ strcpy(psy->charging_full_trig_name, psy->name); -+ strcat(psy->charging_full_trig_name, "-charging-or-full"); -+ strcpy(psy->charging_trig_name, psy->name); -+ strcat(psy->charging_trig_name, "-charging"); -+ strcpy(psy->full_trig_name, psy->name); -+ strcat(psy->full_trig_name, "-full"); -+ -+ led_trigger_register_simple(psy->charging_full_trig_name, -+ &psy->charging_full_trig); -+ led_trigger_register_charging(psy->charging_trig_name, -+ &psy->charging_trig); -+ led_trigger_register_simple(psy->full_trig_name, -+ &psy->full_trig); -+ -+ goto success; -+ -+full_failed: -+ kfree(psy->charging_trig_name); -+charging_failed: -+ kfree(psy->charging_full_trig_name); -+charging_full_failed: -+ rc = -ENOMEM; -+success: -+ return rc; -+} -+ -+static void power_supply_remove_bat_triggers(struct power_supply *psy) -+{ -+ led_trigger_unregister_simple(psy->charging_full_trig); -+ led_trigger_unregister_charging(psy->charging_trig); -+ led_trigger_unregister_simple(psy->full_trig); -+ kfree(psy->full_trig_name); -+ kfree(psy->charging_trig_name); -+ kfree(psy->charging_full_trig_name); -+ return; -+} -+ -+/* Generated power specific LEDs triggers. */ -+ -+static void power_supply_update_gen_leds(struct power_supply *psy) -+{ -+ union power_supply_propval online; -+ -+ if (psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &online)) -+ return; -+ -+ dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, online.intval); -+ -+ if (online.intval) -+ led_trigger_event(psy->online_trig, LED_FULL); -+ else -+ led_trigger_event(psy->online_trig, LED_OFF); -+ -+ return; -+} -+ -+static int power_supply_create_gen_triggers(struct power_supply *psy) -+{ -+ int rc = 0; -+ -+ psy->online_trig_name = kmalloc(strlen(psy->name) + sizeof("-online"), -+ GFP_KERNEL); -+ if (!psy->online_trig_name) -+ goto online_failed; -+ -+ strcpy(psy->online_trig_name, psy->name); -+ strcat(psy->online_trig_name, "-online"); -+ -+ led_trigger_register_simple(psy->online_trig_name, &psy->online_trig); -+ -+ goto success; -+ -+online_failed: -+ rc = -ENOMEM; -+success: -+ return rc; -+} -+ -+static void power_supply_remove_gen_triggers(struct power_supply *psy) -+{ -+ led_trigger_unregister_simple(psy->online_trig); -+ kfree(psy->online_trig_name); -+ return; -+} -+ -+/* Choice what triggers to create&update. */ -+ -+void power_supply_update_leds(struct power_supply *psy) -+{ -+ if (psy->type == POWER_SUPPLY_TYPE_BATTERY) -+ power_supply_update_bat_leds(psy); -+ else -+ power_supply_update_gen_leds(psy); -+ return; -+} -+ -+int power_supply_create_triggers(struct power_supply *psy) -+{ -+ if (psy->type == POWER_SUPPLY_TYPE_BATTERY) -+ return power_supply_create_bat_triggers(psy); -+ return power_supply_create_gen_triggers(psy); -+} -+ -+void power_supply_remove_triggers(struct power_supply *psy) -+{ -+ if (psy->type == POWER_SUPPLY_TYPE_BATTERY) -+ power_supply_remove_bat_triggers(psy); -+ else -+ power_supply_remove_gen_triggers(psy); -+ return; -+} -Index: linux-2.6.22/drivers/power/power_supply_sysfs.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/power_supply_sysfs.c 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,289 @@ -+/* -+ * Sysfs interface for the universal power supply monitor class -+ * -+ * Copyright © 2007 David Woodhouse -+ * Copyright (c) 2007 Anton Vorontsov -+ * Copyright (c) 2004 Szabolcs Gyurko -+ * Copyright (c) 2003 Ian Molton -+ * -+ * Modified: 2004, Oct Szabolcs Gyurko -+ * -+ * You may use this code as per GPL version 2 -+ */ -+ -+#include -+#include -+ -+/* -+ * This is because the name "current" breaks the device attr macro. -+ * The "current" word resolvs to "(get_current())" so instead of -+ * "current" "(get_current())" appears in the sysfs. -+ * -+ * The source of this definition is the device.h which calls __ATTR -+ * macro in sysfs.h which calls the __stringify macro. -+ * -+ * Only modification that the name is not tried to be resolved -+ * (as a macro let's say). -+ */ -+ -+#define POWER_SUPPLY_ATTR(_name) \ -+{ \ -+ .attr = { .name = #_name, .mode = 0444, .owner = THIS_MODULE }, \ -+ .show = power_supply_show_property, \ -+ .store = NULL, \ -+} -+ -+static struct device_attribute power_supply_attrs[]; -+ -+static ssize_t power_supply_show_property(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) { -+ static char *status_text[] = { -+ "Unknown", "Charging", "Discharging", "Not charging", "Full" -+ }; -+ static char *health_text[] = { -+ "Unknown", "Good", "Overheat", "Dead" -+ }; -+ static char *technology_text[] = { -+ "Unknown", "NiMH", "Li-ion", "Li-poly" -+ }; -+ static char *capacity_level_text[] = { -+ "Unknown", "Critical", "Low", "Normal", "High", "Full" -+ }; -+ ssize_t ret; -+ struct power_supply *psy = dev_get_drvdata(dev); -+ const ptrdiff_t off = attr - power_supply_attrs; -+ union power_supply_propval value; -+ -+ ret = psy->get_property(psy, off, &value); -+ -+ if (ret < 0) { -+ dev_err(dev, "driver failed to report `%s' property\n", -+ attr->attr.name); -+ return ret; -+ } -+ -+ if (off == POWER_SUPPLY_PROP_STATUS) -+ return sprintf(buf, "%s\n", status_text[value.intval]); -+ else if (off == POWER_SUPPLY_PROP_HEALTH) -+ return sprintf(buf, "%s\n", health_text[value.intval]); -+ else if (off == POWER_SUPPLY_PROP_TECHNOLOGY) -+ return sprintf(buf, "%s\n", technology_text[value.intval]); -+ else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL) -+ return sprintf(buf, "%s\n", -+ capacity_level_text[value.intval]); -+ else if (off == POWER_SUPPLY_PROP_MODEL_NAME) -+ return sprintf(buf, "%s\n", value.strval); -+ -+ return sprintf(buf, "%d\n", value.intval); -+} -+ -+/* Must be in the same order as POWER_SUPPLY_PROP_* */ -+static struct device_attribute power_supply_attrs[] = { -+ /* Properties of type `int' */ -+ POWER_SUPPLY_ATTR(status), -+ POWER_SUPPLY_ATTR(health), -+ POWER_SUPPLY_ATTR(present), -+ POWER_SUPPLY_ATTR(online), -+ POWER_SUPPLY_ATTR(technology), -+ POWER_SUPPLY_ATTR(voltage_max_design), -+ POWER_SUPPLY_ATTR(voltage_min_design), -+ POWER_SUPPLY_ATTR(voltage_now), -+ POWER_SUPPLY_ATTR(voltage_avg), -+ POWER_SUPPLY_ATTR(current_now), -+ POWER_SUPPLY_ATTR(current_avg), -+ POWER_SUPPLY_ATTR(charge_full_design), -+ POWER_SUPPLY_ATTR(charge_empty_design), -+ POWER_SUPPLY_ATTR(charge_full), -+ POWER_SUPPLY_ATTR(charge_empty), -+ POWER_SUPPLY_ATTR(charge_now), -+ POWER_SUPPLY_ATTR(charge_avg), -+ POWER_SUPPLY_ATTR(energy_full_design), -+ POWER_SUPPLY_ATTR(energy_empty_design), -+ POWER_SUPPLY_ATTR(energy_full), -+ POWER_SUPPLY_ATTR(energy_empty), -+ POWER_SUPPLY_ATTR(energy_now), -+ POWER_SUPPLY_ATTR(energy_avg), -+ POWER_SUPPLY_ATTR(capacity), -+ POWER_SUPPLY_ATTR(capacity_level), -+ POWER_SUPPLY_ATTR(temp), -+ POWER_SUPPLY_ATTR(temp_ambient), -+ POWER_SUPPLY_ATTR(time_to_empty_now), -+ POWER_SUPPLY_ATTR(time_to_empty_avg), -+ POWER_SUPPLY_ATTR(time_to_full_now), -+ POWER_SUPPLY_ATTR(time_to_full_avg), -+ /* Properties of type `const char *' */ -+ POWER_SUPPLY_ATTR(model_name), -+}; -+ -+static ssize_t power_supply_show_static_attrs(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) { -+ static char *type_text[] = { "Battery", "UPS", "Mains", "USB" }; -+ struct power_supply *psy = dev_get_drvdata(dev); -+ -+ return sprintf(buf, "%s\n", type_text[psy->type]); -+} -+ -+static struct device_attribute power_supply_static_attrs[] = { -+ __ATTR(type, 0444, power_supply_show_static_attrs, NULL), -+}; -+ -+int power_supply_create_attrs(struct power_supply *psy) -+{ -+ int rc = 0; -+ int i, j; -+ -+ for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++) { -+ rc = device_create_file(psy->dev, -+ &power_supply_static_attrs[i]); -+ if (rc) -+ goto statics_failed; -+ } -+ -+ for (j = 0; j < psy->num_properties; j++) { -+ rc = device_create_file(psy->dev, -+ &power_supply_attrs[psy->properties[j]]); -+ if (rc) -+ goto dynamics_failed; -+ } -+ -+ goto succeed; -+ -+dynamics_failed: -+ while (j--) -+ device_remove_file(psy->dev, -+ &power_supply_attrs[psy->properties[j]]); -+statics_failed: -+ while (i--) -+ device_remove_file(psy->dev, -+ &power_supply_static_attrs[psy->properties[i]]); -+succeed: -+ return rc; -+} -+ -+void power_supply_remove_attrs(struct power_supply *psy) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++) -+ device_remove_file(psy->dev, -+ &power_supply_static_attrs[i]); -+ -+ for (i = 0; i < psy->num_properties; i++) -+ device_remove_file(psy->dev, -+ &power_supply_attrs[psy->properties[i]]); -+ -+ return; -+} -+ -+static char *kstruprdup(const char *str, gfp_t gfp) -+{ -+ char *ret, *ustr; -+ -+ ustr = ret = kmalloc(strlen(str) + 1, gfp); -+ -+ if (!ret) -+ return NULL; -+ -+ while (*str) -+ *ustr++ = toupper(*str++); -+ -+ *ustr = 0; -+ -+ return ret; -+} -+ -+int power_supply_uevent(struct device *dev, char **envp, int num_envp, -+ char *buffer, int buffer_size) -+{ -+ struct power_supply *psy = dev_get_drvdata(dev); -+ int i = 0, length = 0, ret = 0, j; -+ char *prop_buf; -+ char *attrname; -+ -+ dev_dbg(dev, "uevent\n"); -+ -+ if (!psy) { -+ dev_dbg(dev, "No power supply yet\n"); -+ return ret; -+ } -+ -+ dev_dbg(dev, "POWER_SUPPLY_NAME=%s\n", psy->name); -+ -+ ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size, -+ &length, "POWER_SUPPLY_NAME=%s", psy->name); -+ if (ret) -+ return ret; -+ -+ prop_buf = (char *)get_zeroed_page(GFP_KERNEL); -+ if (!prop_buf) -+ return -ENOMEM; -+ -+ for (j = 0; j < ARRAY_SIZE(power_supply_static_attrs); j++) { -+ struct device_attribute *attr; -+ char *line; -+ -+ attr = &power_supply_static_attrs[j]; -+ -+ ret = power_supply_show_static_attrs(dev, attr, prop_buf); -+ if (ret < 0) -+ goto out; -+ -+ line = strchr(prop_buf, '\n'); -+ if (line) -+ *line = 0; -+ -+ attrname = kstruprdup(attr->attr.name, GFP_KERNEL); -+ if (!attrname) { -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ dev_dbg(dev, "Static prop %s=%s\n", attrname, prop_buf); -+ -+ ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size, -+ &length, "POWER_SUPPLY_%s=%s", -+ attrname, prop_buf); -+ kfree(attrname); -+ if (ret) -+ goto out; -+ } -+ -+ dev_dbg(dev, "%zd dynamic props\n", psy->num_properties); -+ -+ for (j = 0; j < psy->num_properties; j++) { -+ struct device_attribute *attr; -+ char *line; -+ -+ attr = &power_supply_attrs[psy->properties[j]]; -+ -+ ret = power_supply_show_property(dev, attr, prop_buf); -+ if (ret < 0) -+ goto out; -+ -+ line = strchr(prop_buf, '\n'); -+ if (line) -+ *line = 0; -+ -+ attrname = kstruprdup(attr->attr.name, GFP_KERNEL); -+ if (!attrname) { -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ dev_dbg(dev, "prop %s=%s\n", attrname, prop_buf); -+ -+ ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size, -+ &length, "POWER_SUPPLY_%s=%s", -+ attrname, prop_buf); -+ kfree(attrname); -+ if (ret) -+ goto out; -+ } -+ -+out: -+ free_page((unsigned long)prop_buf); -+ -+ return ret; -+} -Index: linux-2.6.22/drivers/power/simpad-battery.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/power/simpad-battery.c 2007-08-23 12:13:52.000000000 +0200 -@@ -0,0 +1,242 @@ -+/* -+ * linux/drivers/misc/simpad-battery.c -+ * -+ * Copyright (C) 2005 Holger Hans Peter Freyther -+ * Copyright (C) 2001 Juergen Messerer -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License. -+ * -+ * Read the Battery Level through the UCB1x00 chip. T-Sinuspad is -+ * unsupported for now. -+ * -+ */ -+ -+#include -+#include -+#include "ucb1x00.h" -+ -+ -+/* -+ * Conversion from AD -> mV -+ * 7.5V = 1023 7.3313mV/Digit -+ * -+ * 400 Units == 9.7V -+ * a = ADC value -+ * 21 = ADC error -+ * 12600 = Divident to get 2*7.3242 -+ * 860 = Divider to get 2*7.3242 -+ * 170 = Voltagedrop over -+ */ -+#define CALIBRATE_BATTERY(a) ((((a + 21)*12600)/860) + 170) -+ -+/* -+ * We have two types of batteries a small and a large one -+ * To get the right value we to distinguish between those two -+ * 450 Units == 15 V -+ */ -+#define CALIBRATE_SUPPLY(a) (((a) * 1500) / 45) -+#define MIN_SUPPLY 12000 /* Less then 12V means no powersupply */ -+ -+/* -+ * Charging Current -+ * if value is >= 50 then charging is on -+ */ -+#define CALIBRATE_CHARGING(a) (((a)* 1000)/(152/4))) -+ -+struct simpad_battery_t { -+ struct battery battery; -+ struct ucb1x00* ucb; -+ -+ /* -+ * Variables for the values to one time support -+ * T-Sinuspad as well -+ */ -+ int min_voltage; -+ int min_current; -+ int min_charge; -+ -+ int max_voltage; -+ int max_current; -+ int max_charge; -+ -+ int min_supply; -+ int charging_led_label; -+ int charging_max_label; -+ int batt_full; -+ int batt_low; -+ int batt_critical; -+ int batt_empty; -+}; -+ -+static int simpad_get_min_voltage(struct battery* _battery ) -+{ -+ struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery; -+ return battery->min_voltage; -+} -+ -+static int simpad_get_min_current(struct battery* _battery) -+{ -+ struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery; -+ return battery->min_current; -+} -+ -+static int simpad_get_min_charge(struct battery* _battery) -+{ -+ struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery; -+ return battery->min_charge; -+} -+ -+static int simpad_get_max_voltage(struct battery* _battery) -+{ -+ struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery; -+ return battery->max_voltage; -+} -+ -+static int simpad_get_max_current(struct battery* _battery) -+{ -+ struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery; -+ return battery->max_current; -+} -+ -+static int simpad_get_max_charge(struct battery* _battery) -+{ -+ struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery; -+ return battery->max_charge; -+} -+ -+static int simpad_get_temp(struct battery* _battery) -+{ -+ return 0; -+} -+ -+static int simpad_get_voltage(struct battery* _battery) -+{ -+ int val; -+ struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery; -+ -+ -+ ucb1x00_adc_enable(battery->ucb); -+ val = ucb1x00_adc_read(battery->ucb, UCB_ADC_INP_AD1, UCB_NOSYNC); -+ ucb1x00_adc_disable(battery->ucb); -+ -+ return CALIBRATE_BATTERY(val); -+} -+ -+static int simpad_get_current(struct battery* _battery) -+{ -+ int val; -+ struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery; -+ -+ ucb1x00_adc_enable(battery->ucb); -+ val = ucb1x00_adc_read(battery->ucb, UCB_ADC_INP_AD3, UCB_NOSYNC); -+ ucb1x00_adc_disable(battery->ucb); -+ -+ return val; -+} -+ -+static int simpad_get_charge(struct battery* _battery) -+{ -+ int val; -+ struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery; -+ -+ ucb1x00_adc_enable(battery->ucb); -+ val = ucb1x00_adc_read(battery->ucb, UCB_ADC_INP_AD2, UCB_NOSYNC); -+ ucb1x00_adc_disable(battery->ucb); -+ -+ return CALIBRATE_SUPPLY(val); -+ -+} -+ -+static int simpad_get_status(struct battery* _battery) -+{ -+ struct simpad_battery_t* battery = (struct simpad_battery_t*)(_battery); -+ int vcharger = simpad_get_voltage(_battery); -+ int icharger = simpad_get_current(_battery); -+ -+ int status = BATTERY_STATUS_UNKNOWN; -+ if(icharger > battery->charging_led_label) -+ status = BATTERY_STATUS_CHARGING; -+ else if(vcharger > battery->min_supply) -+ status = BATTERY_STATUS_NOT_CHARGING; -+ else -+ status = BATTERY_STATUS_DISCHARGING; -+ -+ return status; -+} -+ -+static struct simpad_battery_t simpad_battery = { -+ .battery = { -+ .get_min_voltage = simpad_get_min_voltage, -+ .get_min_current = simpad_get_min_current, -+ .get_min_charge = simpad_get_min_charge, -+ .get_max_voltage = simpad_get_max_voltage, -+ .get_max_current = simpad_get_max_current, -+ .get_max_charge = simpad_get_max_charge, -+ .get_temp = simpad_get_temp, -+ .get_voltage = simpad_get_voltage, -+ .get_current = simpad_get_current, -+ .get_charge = simpad_get_charge, -+ .get_status = simpad_get_status, -+ }, -+ .min_voltage = 0, -+ .min_current = 0, -+ .min_charge = 0, -+ .max_voltage = 0, -+ .max_current = 0, -+ .max_charge = 0, -+ -+ .min_supply = 1200, -+ .charging_led_label = 18, -+ .charging_max_label = 265, -+ .batt_full = 8300, -+ .batt_low = 7300, -+ .batt_critical = 6800, -+ .batt_empty = 6500, -+}; -+ -+ -+ -+/* -+ * UCB glue code -+ */ -+static int ucb1x00_battery_add(struct class_device *dev) -+{ -+ struct ucb1x00 *ucb = classdev_to_ucb1x00(dev); -+ simpad_battery.ucb = ucb; -+ -+ battery_class_register(&simpad_battery.battery); -+ -+ return 0; -+} -+ -+static void ucb1x00_battery_remove(struct class_device *dev) -+{ -+ return battery_class_unregister(&simpad_battery.battery); -+} -+ -+ -+static struct ucb1x00_class_interface ucb1x00_battery_interface = { -+ .interface = { -+ .add = ucb1x00_battery_add, -+ .remove = ucb1x00_battery_remove, -+ }, -+}; -+ -+ -+static int __init battery_register(void) -+{ -+ return ucb1x00_register_interface(&ucb1x00_battery_interface); -+} -+ -+static void __exit battery_unregister(void) -+{ -+ ucb1x00_unregister_interface(&ucb1x00_battery_interface); -+} -+ -+module_init(battery_register); -+module_exit(battery_unregister); -+ -+MODULE_AUTHOR("Holger Hans Peter Freyther"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.22/arch/arm/Kconfig -=================================================================== ---- linux-2.6.22.orig/arch/arm/Kconfig 2007-08-23 12:17:42.000000000 +0200 -+++ linux-2.6.22/arch/arm/Kconfig 2007-08-23 12:22:28.000000000 +0200 -@@ -1016,6 +1016,8 @@ - - source "drivers/w1/Kconfig" - -+source "drivers/power/Kconfig" -+ - source "drivers/hwmon/Kconfig" - - #source "drivers/l3/Kconfig" -Index: linux-2.6.22/drivers/Kconfig -=================================================================== ---- linux-2.6.22.orig/drivers/Kconfig 2007-08-23 12:21:27.000000000 +0200 -+++ linux-2.6.22/drivers/Kconfig 2007-08-23 12:22:03.000000000 +0200 -@@ -54,6 +54,8 @@ - - source "drivers/w1/Kconfig" - -+source "drivers/power/Kconfig" -+ - source "drivers/hwmon/Kconfig" - - source "drivers/mfd/Kconfig" -Index: linux-2.6.22/drivers/Makefile -=================================================================== ---- linux-2.6.22.orig/drivers/Makefile 2007-08-23 12:33:58.000000000 +0200 -+++ linux-2.6.22/drivers/Makefile 2007-08-23 12:34:34.000000000 +0200 -@@ -61,6 +61,7 @@ - obj-$(CONFIG_RTC_LIB) += rtc/ - obj-y += i2c/ - obj-$(CONFIG_W1) += w1/ -+obj-$(CONFIG_POWER_SUPPLY) += power/ - obj-$(CONFIG_HWMON) += hwmon/ - obj-$(CONFIG_PHONE) += telephony/ - obj-$(CONFIG_MD) += md/ -Index: linux-2.6.22/include/linux/power_supply.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/linux/power_supply.h 2007-08-23 12:37:10.000000000 +0200 -@@ -0,0 +1,175 @@ -+/* -+ * Universal power supply monitor class -+ * -+ * Copyright (c) 2007 Anton Vorontsov -+ * Copyright (c) 2004 Szabolcs Gyurko -+ * Copyright (c) 2003 Ian Molton -+ * -+ * Modified: 2004, Oct Szabolcs Gyurko -+ * -+ * You may use this code as per GPL version 2 -+ */ -+ -+#ifndef __LINUX_POWER_SUPPLY_H__ -+#define __LINUX_POWER_SUPPLY_H__ -+ -+#include -+#include -+#include -+ -+/* -+ * All voltages, currents, charges, energies, time and temperatures in uV, -+ * uA, uAh, uWh, seconds and tenths of degree Celsius unless otherwise -+ * stated. It's driver's job to convert its raw values to units in which -+ * this class operates. -+ */ -+ -+/* -+ * For systems where the charger determines the maximum battery capacity -+ * the min and max fields should be used to present these values to user -+ * space. Unused/unknown fields will not appear in sysfs. -+ */ -+ -+enum { -+ POWER_SUPPLY_STATUS_UNKNOWN = 0, -+ POWER_SUPPLY_STATUS_CHARGING, -+ POWER_SUPPLY_STATUS_DISCHARGING, -+ POWER_SUPPLY_STATUS_NOT_CHARGING, -+ POWER_SUPPLY_STATUS_FULL, -+}; -+ -+enum { -+ POWER_SUPPLY_HEALTH_UNKNOWN = 0, -+ POWER_SUPPLY_HEALTH_GOOD, -+ POWER_SUPPLY_HEALTH_OVERHEAT, -+ POWER_SUPPLY_HEALTH_DEAD, -+}; -+ -+enum { -+ POWER_SUPPLY_TECHNOLOGY_UNKNOWN = 0, -+ POWER_SUPPLY_TECHNOLOGY_NIMH, -+ POWER_SUPPLY_TECHNOLOGY_LION, -+ POWER_SUPPLY_TECHNOLOGY_LIPO, -+}; -+ -+enum { -+ POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0, -+ POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL, -+ POWER_SUPPLY_CAPACITY_LEVEL_LOW, -+ POWER_SUPPLY_CAPACITY_LEVEL_NORMAL, -+ POWER_SUPPLY_CAPACITY_LEVEL_HIGH, -+ POWER_SUPPLY_CAPACITY_LEVEL_FULL, -+}; -+ -+enum power_supply_property { -+ /* Properties of type `int' */ -+ POWER_SUPPLY_PROP_STATUS = 0, -+ POWER_SUPPLY_PROP_HEALTH, -+ POWER_SUPPLY_PROP_PRESENT, -+ POWER_SUPPLY_PROP_ONLINE, -+ POWER_SUPPLY_PROP_TECHNOLOGY, -+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, -+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, -+ POWER_SUPPLY_PROP_VOLTAGE_NOW, -+ POWER_SUPPLY_PROP_VOLTAGE_AVG, -+ POWER_SUPPLY_PROP_CURRENT_NOW, -+ POWER_SUPPLY_PROP_CURRENT_AVG, -+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, -+ POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN, -+ POWER_SUPPLY_PROP_CHARGE_FULL, -+ POWER_SUPPLY_PROP_CHARGE_EMPTY, -+ POWER_SUPPLY_PROP_CHARGE_NOW, -+ POWER_SUPPLY_PROP_CHARGE_AVG, -+ POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, -+ POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN, -+ POWER_SUPPLY_PROP_ENERGY_FULL, -+ POWER_SUPPLY_PROP_ENERGY_EMPTY, -+ POWER_SUPPLY_PROP_ENERGY_NOW, -+ POWER_SUPPLY_PROP_ENERGY_AVG, -+ POWER_SUPPLY_PROP_CAPACITY, /* in percents! */ -+ POWER_SUPPLY_PROP_CAPACITY_LEVEL, -+ POWER_SUPPLY_PROP_TEMP, -+ POWER_SUPPLY_PROP_TEMP_AMBIENT, -+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, -+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, -+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, -+ POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, -+ /* Properties of type `const char *' */ -+ POWER_SUPPLY_PROP_MODEL_NAME, -+}; -+ -+enum power_supply_type { -+ POWER_SUPPLY_TYPE_BATTERY = 0, -+ POWER_SUPPLY_TYPE_UPS, -+ POWER_SUPPLY_TYPE_MAINS, -+ POWER_SUPPLY_TYPE_USB, -+}; -+ -+union power_supply_propval { -+ int intval; -+ const char *strval; -+}; -+ -+struct power_supply { -+ const char *name; -+ enum power_supply_type type; -+ enum power_supply_property *properties; -+ size_t num_properties; -+ -+ char **supplied_to; -+ size_t num_supplicants; -+ -+ int (*get_property)(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val); -+ void (*external_power_changed)(struct power_supply *psy); -+ -+ /* For APM emulation, think legacy userspace. */ -+ int use_for_apm; -+ -+ /* private */ -+ struct device *dev; -+ struct work_struct changed_work; -+ -+#ifdef CONFIG_LEDS_TRIGGERS -+ struct led_trigger *charging_full_trig; -+ char *charging_full_trig_name; -+ struct led_trigger *charging_trig; -+ char *charging_trig_name; -+ struct led_trigger *full_trig; -+ char *full_trig_name; -+ struct led_trigger *online_trig; -+ char *online_trig_name; -+#endif -+}; -+ -+/* -+ * This is recommended structure to specify static power supply parameters. -+ * Generic one, parametrizable for different power supplies. Power supply -+ * class itself does not use it, but that's what implementing most platform -+ * drivers, should try reuse for consistency. -+ */ -+ -+struct power_supply_info { -+ const char *name; -+ int technology; -+ int voltage_max_design; -+ int voltage_min_design; -+ int charge_full_design; -+ int charge_empty_design; -+ int energy_full_design; -+ int energy_empty_design; -+ int use_for_apm; -+}; -+ -+extern void power_supply_changed(struct power_supply *psy); -+extern int power_supply_am_i_supplied(struct power_supply *psy); -+ -+extern int power_supply_register(struct device *parent, -+ struct power_supply *psy); -+extern void power_supply_unregister(struct power_supply *psy); -+ -+/* For APM emulation, think legacy userspace. */ -+extern struct class *power_supply_class; -+ -+#endif /* __LINUX_POWER_SUPPLY_H__ */ diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa-serial-hack.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa-serial-hack.patch deleted file mode 100644 index bf20f46a05..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa-serial-hack.patch +++ /dev/null @@ -1,90 +0,0 @@ ---- - drivers/serial/8250.c | 5 +++++ - drivers/serial/serial_core.c | 1 + - drivers/serial/serial_cs.c | 12 +++++++++--- - include/linux/serial_core.h | 1 + - 4 files changed, 16 insertions(+), 3 deletions(-) - -Index: linux-2.6.20/drivers/serial/8250.c -=================================================================== ---- linux-2.6.20.orig/drivers/serial/8250.c 2007-04-27 13:37:26.000000000 +0100 -+++ linux-2.6.20/drivers/serial/8250.c 2007-04-27 13:38:16.000000000 +0100 -@@ -2429,7 +2429,12 @@ - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, -+#ifdef CONFIG_SERIAL_PXA -+ .minor = 64 + 4, -+ .name_base = 4, -+#else - .minor = 64, -+#endif - .nr = UART_NR, - .cons = SERIAL8250_CONSOLE, - }; -Index: linux-2.6.20/drivers/serial/serial_core.c -=================================================================== ---- linux-2.6.20.orig/drivers/serial/serial_core.c 2007-02-04 18:44:54.000000000 +0000 -+++ linux-2.6.20/drivers/serial/serial_core.c 2007-04-27 13:39:39.000000000 +0100 -@@ -2068,7 +2068,8 @@ - printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n", - port->dev ? port->dev->bus_id : "", - port->dev ? ": " : "", -- drv->dev_name, port->line, address, port->irq, uart_type(port)); -+ drv->dev_name, port->line + drv->name_base, address, port->irq, -+ uart_type(port)); - } - - static void -@@ -2183,6 +2184,7 @@ - normal->owner = drv->owner; - normal->driver_name = drv->driver_name; - normal->name = drv->dev_name; -+ normal->name_base = drv->name_base; - normal->major = drv->major; - normal->minor_start = drv->minor; - normal->type = TTY_DRIVER_TYPE_SERIAL; -Index: linux-2.6.20/include/linux/serial_core.h -=================================================================== ---- linux-2.6.20.orig/include/linux/serial_core.h 2007-02-04 18:44:54.000000000 +0000 -+++ linux-2.6.20/include/linux/serial_core.h 2007-04-27 13:37:27.000000000 +0100 -@@ -341,6 +341,7 @@ - struct module *owner; - const char *driver_name; - const char *dev_name; -+ int name_base; - int major; - int minor; - int nr; -Index: linux-2.6.20/drivers/serial/serial_cs.c -=================================================================== ---- linux-2.6.20.orig/drivers/serial/serial_cs.c 2007-02-04 18:44:54.000000000 +0000 -+++ linux-2.6.20/drivers/serial/serial_cs.c 2007-04-27 13:40:34.000000000 +0100 -@@ -390,7 +390,7 @@ - kio_addr_t iobase, int irq) - { - struct uart_port port; -- int line; -+ int line, linestart; - - memset(&port, 0, sizeof (struct uart_port)); - port.iobase = iobase; -@@ -411,10 +411,16 @@ - return -EINVAL; - } - -+#if CONFIG_SERIAL_PXA -+ linestart = 4; -+#else -+ linestart = 0; -+#endif -+ - info->line[info->ndev] = line; -- sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); -+ sprintf(info->node[info->ndev].dev_name, "ttyS%d", line+linestart); - info->node[info->ndev].major = TTY_MAJOR; -- info->node[info->ndev].minor = 0x40 + line; -+ info->node[info->ndev].minor = 0x40 + line + linestart; - if (info->ndev > 0) - info->node[info->ndev - 1].next = &info->node[info->ndev]; - info->ndev++; diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa27x_overlay-r8.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa27x_overlay-r8.patch deleted file mode 100644 index 693ad20453..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa27x_overlay-r8.patch +++ /dev/null @@ -1,2427 +0,0 @@ - drivers/video/Kconfig | 18 - drivers/video/Makefile | 1 - drivers/video/pxafb.c | 305 +++++-- - drivers/video/pxafb.h | 65 + - drivers/video/pxafb_overlay.c | 1525 ++++++++++++++++++++++++++++++++++++ - include/asm-arm/arch-pxa/pxa-regs.h | 111 ++ - 6 files changed, 1969 insertions(+), 56 deletions(-) - ---- linux-2.6.24-rc1.orig/drivers/video/Kconfig -+++ linux-2.6.24-rc1/drivers/video/Kconfig -@@ -1718,6 +1718,24 @@ - - If unsure, say N. - -+choice -+ prompt "PXA LCD type" -+ depends on FB_PXA -+ -+config FB_PXA_LCD_QVGA -+ bool "QVGA(320x240)" -+ -+config FB_PXA_LCD_VGA -+ bool "VGA (640x480)" -+ -+endchoice -+ -+config FB_PXA_OVERLAY -+ tristate "PXA LCD overlay support" -+ depends on FB_PXA -+ ---help--- -+ Frame buffer overlay driver for PXA27x -+ - config FB_PXA_PARAMETERS - bool "PXA LCD command line parameters" - default n ---- linux-2.6.24-rc1.orig/drivers/video/Makefile -+++ linux-2.6.24-rc1/drivers/video/Makefile -@@ -96,6 +96,7 @@ - obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o - obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o - obj-$(CONFIG_FB_PXA) += pxafb.o -+obj-$(CONFIG_FB_PXA_OVERLAY) += pxafb_overlay.o - obj-$(CONFIG_FB_W100) += w100fb.o - obj-$(CONFIG_FB_AU1100) += au1100fb.o - obj-$(CONFIG_FB_AU1200) += au1200fb.o ---- linux-2.6.24-rc1.orig/drivers/video/pxafb.c -+++ linux-2.6.24-rc1/drivers/video/pxafb.c -@@ -59,17 +59,49 @@ - #define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM|LCCR0_BM|LCCR0_QDM|LCCR0_DIS|LCCR0_EFM|LCCR0_IUM|LCCR0_SFM|LCCR0_LDM|LCCR0_ENB) - #define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP|LCCR3_VSP|LCCR3_PCD|LCCR3_BPP) - -+wait_queue_head_t fcs_wait_eof; -+int fcs_in_eof; -+static DECLARE_MUTEX(fcs_lcd_sem); -+ - static void (*pxafb_backlight_power)(int); - static void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); - - static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *); --static void set_ctrlr_state(struct pxafb_info *fbi, u_int state); -+void pxafb_set_ctrlr_state(struct pxafb_info *fbi, u_int state); - - #ifdef CONFIG_FB_PXA_PARAMETERS - #define PXAFB_OPTIONS_SIZE 256 - static char g_options[PXAFB_OPTIONS_SIZE] __devinitdata = ""; - #endif - -+static struct pxafb_rgb def_rgb_8 = { -+ red: { offset: 0, length: 8, }, -+ green: { offset: 0, length: 8, }, -+ blue: { offset: 0, length: 8, }, -+ transp: { offset: 0, length: 0, }, -+}; -+ -+static struct pxafb_rgb def_rgb_16 = { -+ red: { offset: 11, length: 5, }, -+ green: { offset: 5, length: 6, }, -+ blue: { offset: 0, length: 5, }, -+ transp: { offset: 0, length: 0, }, -+}; -+ -+static struct pxafb_rgb def_rgb_18 = { -+ red: { offset: 12, length: 6, }, -+ green: { offset: 6, length: 6, }, -+ blue: { offset: 0, length: 6, }, -+ transp: { offset: 0, length: 0, }, -+}; -+ -+static struct pxafb_rgb def_rgb_24 = { -+ red: { offset: 16, length: 8, }, -+ green: { offset: 8, length: 8, }, -+ blue: { offset: 0, length: 8, }, -+ transp: { offset: 0, length: 0, }, -+}; -+ - static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state) - { - unsigned long flags; -@@ -209,6 +241,10 @@ - case 4: ret = LCCR3_4BPP; break; - case 8: ret = LCCR3_8BPP; break; - case 16: ret = LCCR3_16BPP; break; -+ case 18: ret = LCCR3_18BPP; break; -+ case 19: ret = LCCR3_19BPP; break; -+ case 24: ret = LCCR3_24BPP; break; -+ case 25: ret = LCCR3_25BPP; break; - } - return ret; - } -@@ -320,18 +356,34 @@ - * The pixel packing format is described on page 7-11 of the - * PXA2XX Developer's Manual. - */ -- if (var->bits_per_pixel == 16) { -- var->red.offset = 11; var->red.length = 5; -- var->green.offset = 5; var->green.length = 6; -- var->blue.offset = 0; var->blue.length = 5; -- var->transp.offset = var->transp.length = 0; -- } else { -- var->red.offset = var->green.offset = var->blue.offset = var->transp.offset = 0; -- var->red.length = 8; -- var->green.length = 8; -- var->blue.length = 8; -- var->transp.length = 0; -- } -+ switch (var->bits_per_pixel) { -+ case 16: -+ /* 2 pixels per line */ -+ var->red = def_rgb_16.red; -+ var->green = def_rgb_16.green; -+ var->blue = def_rgb_16.blue; -+ var->transp = def_rgb_16.transp; -+ break; -+ case 18: -+ case 19: -+ var->red = def_rgb_18.red; -+ var->green = def_rgb_18.green; -+ var->blue = def_rgb_18.blue; -+ var->transp = def_rgb_18.transp; -+ break; -+ case 24: -+ case 25: -+ var->red = def_rgb_24.red; -+ var->green = def_rgb_24.green; -+ var->blue = def_rgb_24.blue; -+ var->transp = def_rgb_24.transp; -+ break; -+ default: -+ var->red = def_rgb_8.red; -+ var->green = def_rgb_8.green; -+ var->blue = def_rgb_8.blue; -+ var->transp = def_rgb_8.transp; -+ } - - #ifdef CONFIG_CPU_FREQ - pr_debug("pxafb: dma period = %d ps, clock = %d kHz\n", -@@ -345,7 +397,7 @@ - static inline void pxafb_set_truecolor(u_int is_true_color) - { - pr_debug("pxafb: true_color = %d\n", is_true_color); -- // do your machine-specific setup if needed -+ /* do your machine-specific setup if needed */ - } - - /* -@@ -360,7 +412,8 @@ - - pr_debug("pxafb: set_par\n"); - -- if (var->bits_per_pixel == 16) -+ if (var->bits_per_pixel == 16 || var->bits_per_pixel == 18 ||var->bits_per_pixel == 19 -+ || var->bits_per_pixel == 24 || var->bits_per_pixel == 25) - fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR; - else if (!fbi->cmap_static) - fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; -@@ -373,12 +426,25 @@ - fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; - } - -- fbi->fb.fix.line_length = var->xres_virtual * -- var->bits_per_pixel / 8; -- if (var->bits_per_pixel == 16) -- fbi->palette_size = 0; -- else -- fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel; -+ switch (var->bits_per_pixel) { -+ case 16: -+ fbi->fb.fix.line_length = var->xres_virtual * 2; -+ fbi->palette_size = 0; -+ break; -+ case 18: -+ case 19: -+ fbi->fb.fix.line_length = var->xres_virtual * 3; -+ fbi->palette_size = 0; -+ break; -+ case 24: -+ case 25: -+ fbi->fb.fix.line_length = var->xres_virtual * 4; -+ fbi->palette_size = 0; -+ break; -+ default: -+ fbi->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; -+ fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel; -+ } - - if ((fbi->lccr4 & LCCR4_PAL_FOR_MASK) == LCCR4_PAL_FOR_0) - palette_mem_size = fbi->palette_size * sizeof(u16); -@@ -395,7 +461,8 @@ - */ - pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR); - -- if (fbi->fb.var.bits_per_pixel == 16) -+ if (fbi->fb.var.bits_per_pixel == 16 || fbi->fb.var.bits_per_pixel == 18 ||fbi->fb.var.bits_per_pixel == 19 -+ || fbi->fb.var.bits_per_pixel == 24 || fbi->fb.var.bits_per_pixel == 25) - fb_dealloc_cmap(&fbi->fb.cmap); - else - fb_alloc_cmap(&fbi->fb.cmap, 1<fb.var.bits_per_pixel, 0); -@@ -441,7 +508,7 @@ - * 16 bpp mode does not really use the palette, so this will not - * blank the display in all modes. - */ --static int pxafb_blank(int blank, struct fb_info *info) -+int pxafb_blank(int blank, struct fb_info *info) - { - struct pxafb_info *fbi = (struct pxafb_info *)info; - int i; -@@ -458,19 +525,20 @@ - for (i = 0; i < fbi->palette_size; i++) - pxafb_setpalettereg(i, 0, 0, 0, 0, info); - -- pxafb_schedule_work(fbi, C_DISABLE); -- //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); -+ pxafb_schedule_work(fbi, C_BLANK); -+ /* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */ - break; - - case FB_BLANK_UNBLANK: -- //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); -+ /* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */ - if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR || - fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR) - fb_set_cmap(&fbi->fb.cmap, info); -- pxafb_schedule_work(fbi, C_ENABLE); -+ pxafb_schedule_work(fbi, C_UNBLANK); - } - return 0; - } -+EXPORT_SYMBOL(pxafb_blank); - - static int pxafb_mmap(struct fb_info *info, - struct vm_area_struct *vma) -@@ -606,6 +674,10 @@ - case 4: - case 8: - case 16: -+ case 18: -+ case 19: -+ case 24: -+ case 25: - break; - default: - printk(KERN_ERR "%s: invalid bit depth %d\n", -@@ -637,7 +709,10 @@ - - new_regs.lccr0 = fbi->lccr0 | - (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | -- LCCR0_QDM | LCCR0_BM | LCCR0_OUM); -+#ifdef CONFIG_PXA27x /* Enable overlay for PXA27x */ -+ LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM | -+#endif -+ LCCR0_QDM | LCCR0_BM | LCCR0_OUM); - - new_regs.lccr1 = - LCCR1_DisWdth(var->xres) + -@@ -696,7 +771,7 @@ - - fbi->dmadesc_fbhigh_cpu->fsadr = fbi->screen_dma; - fbi->dmadesc_fbhigh_cpu->fidr = 0; -- fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL; -+ fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL | LDCMD_EOFINT; - - fbi->dmadesc_palette_cpu->fsadr = fbi->palette_dma; - fbi->dmadesc_palette_cpu->fidr = 0; -@@ -708,7 +783,8 @@ - sizeof(u32); - fbi->dmadesc_palette_cpu->ldcmd |= LDCMD_PAL; - -- if (var->bits_per_pixel == 16) { -+ if (var->bits_per_pixel == 16 || var->bits_per_pixel == 18 ||var->bits_per_pixel == 19 -+ || var->bits_per_pixel == 24 || var->bits_per_pixel == 25) { - /* palette shouldn't be loaded in true-color mode */ - fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_fbhigh_dma; - fbi->fdadr0 = fbi->dmadesc_fbhigh_dma; /* no pal just fbhigh */ -@@ -763,8 +839,8 @@ - } - - /* -- * NOTE! The following functions are purely helpers for set_ctrlr_state. -- * Do not call them directly; set_ctrlr_state does the correct serialisation -+ * NOTE! The following functions are purely helpers for pxafb_set_ctrlr_state. -+ * Do not call them directly; pxafb_set_ctrlr_state does the correct serialisation - * to ensure that things happen in the right way 100% of time time. - * -- rmk - */ -@@ -786,7 +862,8 @@ - - static void pxafb_setup_gpio(struct pxafb_info *fbi) - { -- int gpio, ldd_bits; -+ int gpio; -+ int ldd_bits = 0; - unsigned int lccr0 = fbi->lccr0; - - /* -@@ -796,28 +873,56 @@ - /* 4 bit interface */ - if ((lccr0 & LCCR0_CMS) == LCCR0_Mono && - (lccr0 & LCCR0_SDS) == LCCR0_Sngl && -- (lccr0 & LCCR0_DPD) == LCCR0_4PixMono) -+ (lccr0 & LCCR0_DPD) == LCCR0_4PixMono) { - ldd_bits = 4; -- -+ } - /* 8 bit interface */ - else if (((lccr0 & LCCR0_CMS) == LCCR0_Mono && - ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_DPD) == LCCR0_8PixMono)) || - ((lccr0 & LCCR0_CMS) == LCCR0_Color && -- (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl)) -+ (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl)) { - ldd_bits = 8; -- -+ } - /* 16 bit interface */ -- else if ((lccr0 & LCCR0_CMS) == LCCR0_Color && -- ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act)) -- ldd_bits = 16; -+ else if ((lccr0 & LCCR0_CMS) == LCCR0_Color && -+ ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act)) { -+ switch (fbi->fb.var.bits_per_pixel) { -+ case 16: -+#ifdef CONFIG_PXA27x -+ /* bits 58-77 */ -+ GPDR1 |= (0x3f << 26); -+ GPDR2 |= 0x00003fff; - -+ GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20); -+ GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa; -+#endif -+ ldd_bits = 16; -+ break; -+ case 18: -+ case 19: -+ case 24: -+ case 25: -+#ifdef CONFIG_PXA27x -+ /* bits 58-77 and 86, 87 */ -+ GPDR1 |= (0x3f << 26); -+ GPDR2 |= 0x00c03fff; -+ -+ GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20); -+ GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa; -+ GAFR2_U = (GAFR2_U & 0xffff0fff) | 0xa000; -+#endif -+ ldd_bits = 25; -+ break; -+ } -+ } - else { - printk(KERN_ERR "pxafb_setup_gpio: unable to determine bits per pixel\n"); - return; - } - -- for (gpio = 58; ldd_bits; gpio++, ldd_bits--) -+ for (gpio = 58; ldd_bits > 0; gpio++, ldd_bits--) { - pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT); -+ } - pxa_gpio_mode(GPIO74_LCD_FCLK_MD); - pxa_gpio_mode(GPIO75_LCD_LCLK_MD); - pxa_gpio_mode(GPIO76_LCD_PCLK_MD); -@@ -837,6 +942,7 @@ - /* enable LCD controller clock */ - clk_enable(fbi->clk); - -+ down(&fcs_lcd_sem); - /* Sequence from 11.7.10 */ - LCCR3 = fbi->reg_lccr3; - LCCR2 = fbi->reg_lccr2; -@@ -847,6 +953,8 @@ - FDADR1 = fbi->fdadr1; - LCCR0 |= LCCR0_ENB; - -+ up(&fcs_lcd_sem); -+ - pr_debug("FDADR0 0x%08x\n", (unsigned int) FDADR0); - pr_debug("FDADR1 0x%08x\n", (unsigned int) FDADR1); - pr_debug("LCCR0 0x%08x\n", (unsigned int) LCCR0); -@@ -862,6 +970,7 @@ - - pr_debug("pxafb: disabling LCD controller\n"); - -+ down(&fcs_lcd_sem); - set_current_state(TASK_UNINTERRUPTIBLE); - add_wait_queue(&fbi->ctrlr_wait, &wait); - -@@ -871,6 +980,7 @@ - - schedule_timeout(200 * HZ / 1000); - remove_wait_queue(&fbi->ctrlr_wait, &wait); -+ up(&fcs_lcd_sem); - - /* disable LCD controller clock */ - clk_disable(fbi->clk); -@@ -888,6 +998,11 @@ - LCCR0 |= LCCR0_LDM; - wake_up(&fbi->ctrlr_wait); - } -+ if (lcsr & LCSR_EOF && fcs_in_eof) { -+ LCCR0 |= LCCR0_EFM; -+ fcs_in_eof = 0; -+ wake_up(&fcs_wait_eof); -+ } - - LCSR = lcsr; - return IRQ_HANDLED; -@@ -898,7 +1013,7 @@ - * sleep when disabling the LCD controller, or if we get two contending - * processes trying to alter state. - */ --static void set_ctrlr_state(struct pxafb_info *fbi, u_int state) -+void pxafb_set_ctrlr_state(struct pxafb_info *fbi, u_int state) - { - u_int old_state; - -@@ -920,7 +1035,9 @@ - */ - if (old_state != C_DISABLE && old_state != C_DISABLE_PM) { - fbi->state = state; -- //TODO __pxafb_lcd_power(fbi, 0); -+ /* TODO __pxafb_lcd_power(fbi, 0); */ -+ if(fbi->set_overlay_ctrlr_state) -+ fbi->set_overlay_ctrlr_state(fbi, C_DISABLE); - pxafb_disable_controller(fbi); - } - break; -@@ -934,6 +1051,8 @@ - fbi->state = state; - __pxafb_backlight_power(fbi, 0); - __pxafb_lcd_power(fbi, 0); -+ if(fbi->set_overlay_ctrlr_state) -+ fbi->set_overlay_ctrlr_state(fbi, C_DISABLE); - if (old_state != C_DISABLE_CLKCHANGE) - pxafb_disable_controller(fbi); - } -@@ -947,7 +1066,9 @@ - if (old_state == C_DISABLE_CLKCHANGE) { - fbi->state = C_ENABLE; - pxafb_enable_controller(fbi); -- //TODO __pxafb_lcd_power(fbi, 1); -+ /* TODO __pxafb_lcd_power(fbi, 1); */ -+ if(fbi->set_overlay_ctrlr_state) -+ fbi->set_overlay_ctrlr_state(fbi, C_ENABLE); - } - break; - -@@ -959,9 +1080,13 @@ - */ - if (old_state == C_ENABLE) { - __pxafb_lcd_power(fbi, 0); -+ if(fbi->set_overlay_ctrlr_state) -+ fbi->set_overlay_ctrlr_state(fbi, C_DISABLE); - pxafb_disable_controller(fbi); - pxafb_setup_gpio(fbi); - pxafb_enable_controller(fbi); -+ if(fbi->set_overlay_ctrlr_state) -+ fbi->set_overlay_ctrlr_state(fbi, C_ENABLE); - __pxafb_lcd_power(fbi, 1); - } - break; -@@ -987,11 +1112,46 @@ - pxafb_enable_controller(fbi); - __pxafb_lcd_power(fbi, 1); - __pxafb_backlight_power(fbi, 1); -+ if(fbi->set_overlay_ctrlr_state) -+ fbi->set_overlay_ctrlr_state(fbi, C_ENABLE); - } - break; -+ -+ case C_BLANK: -+ /* -+ * Disable controller, blank overlays if exist. -+ */ -+ if ((old_state != C_DISABLE) && (old_state != C_BLANK)) { -+ fbi->state = state; -+ __pxafb_backlight_power(fbi, 0); -+ __pxafb_lcd_power(fbi, 0); -+ if(fbi->set_overlay_ctrlr_state) -+ fbi->set_overlay_ctrlr_state(fbi, C_BLANK); -+ if (old_state != C_DISABLE_CLKCHANGE) -+ pxafb_disable_controller(fbi); -+ } -+ break; -+ -+ case C_UNBLANK: -+ /* -+ * Power up the LCD screen, enable controller, and -+ * turn on the backlight, unblank overlays if exist. -+ */ -+ if ((old_state != C_ENABLE) && (old_state != C_UNBLANK)) { -+ fbi->state = C_UNBLANK; -+ pxafb_setup_gpio(fbi); -+ pxafb_enable_controller(fbi); -+ __pxafb_lcd_power(fbi, 1); -+ __pxafb_backlight_power(fbi, 1); -+ if(fbi->set_overlay_ctrlr_state) -+ fbi->set_overlay_ctrlr_state(fbi, C_UNBLANK); -+ } -+ break; -+ - } - up(&fbi->ctrlr_sem); - } -+EXPORT_SYMBOL(pxafb_set_ctrlr_state); - - /* - * Our LCD controller task (which is called when we blank or unblank) -@@ -1003,7 +1163,7 @@ - container_of(work, struct pxafb_info, task); - u_int state = xchg(&fbi->task_state, -1); - -- set_ctrlr_state(fbi, state); -+ pxafb_set_ctrlr_state(fbi, state); - } - - #ifdef CONFIG_CPU_FREQ -@@ -1018,19 +1178,29 @@ - pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data) - { - struct pxafb_info *fbi = TO_INF(nb, freq_transition); -- //TODO struct cpufreq_freqs *f = data; -+ /* TODO struct cpufreq_freqs *f = data; */ -+ struct cpufreq_freqs *clkinfo; - u_int pcd; -+ u_int lccr3; - - switch (val) { - case CPUFREQ_PRECHANGE: -- set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE); -+ pxafb_set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE); - break; - - case CPUFREQ_POSTCHANGE: -- pcd = get_pcd(fbi, fbi->fb.var.pixclock); -+ clkinfo = (struct cpufreq_freqs *)data; -+ /* If leaving a 13kHz state with the LCD sustained */ -+ if ((clkinfo->old == 13000)) -+ break; -+ -+ pcd = get_pcd(fbi->fb.var.pixclock); -+ lccr3 = fbi->reg_lccr3; - set_hsync_time(fbi, pcd); - fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd); -- set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE); -+ pxafb_set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE); -+ if (lccr3 != fbi->reg_lccr3 && !((LCCR0 & LCCR0_DIS) || !(LCCR0 & LCCR0_ENB))) -+ LCCR3 = fbi->reg_lccr3; - break; - } - return 0; -@@ -1049,7 +1219,7 @@ - printk(KERN_DEBUG "min dma period: %d ps, " - "new clock %d kHz\n", pxafb_display_dma_period(var), - policy->max); -- // TODO: fill in min/max values -+ /* TODO: fill in min/max values */ - break; - #if 0 - case CPUFREQ_NOTIFY: -@@ -1075,7 +1245,7 @@ - { - struct pxafb_info *fbi = platform_get_drvdata(dev); - -- set_ctrlr_state(fbi, C_DISABLE_PM); -+ pxafb_set_ctrlr_state(fbi, C_DISABLE_PM); - return 0; - } - -@@ -1083,7 +1253,11 @@ - { - struct pxafb_info *fbi = platform_get_drvdata(dev); - -- set_ctrlr_state(fbi, C_ENABLE_PM); -+ pxafb_set_ctrlr_state(fbi, C_ENABLE_PM); -+//RP#ifdef CONFIG_PXA27x -+//RP LCCR4 |= (1 << 31); /* Disable the PCD Divisor, PCDDIV */ -+//RP LCCR4 |= (5 << 17); /* Undocumented feature */ -+//RP#endif - return 0; - } - #else -@@ -1197,11 +1371,21 @@ - fbi->task_state = (u_char)-1; - - for (i = 0; i < inf->num_modes; i++) { -- smemlen = mode[i].xres * mode[i].yres * mode[i].bpp / 8; -+ if (mode[i].bpp <= 16) { /* 8, 16 bpp */ -+ smemlen = mode[i].xres * mode[i].yres * mode[i].bpp / 8; -+ } else if ( mode[i].bpp > 19 ) { /* 24, 25 bpp */ -+ smemlen = mode[i].xres * mode[i].yres * 4; -+ } else { /* 18, 19 bpp */ -+ /* packed format */ -+ smemlen = mode[i].xres * mode[i].yres * 3; -+ } -+ - if (smemlen > fbi->fb.fix.smem_len) - fbi->fb.fix.smem_len = smemlen; - } - -+ fbi->set_overlay_ctrlr_state = NULL; -+ - init_waitqueue_head(&fbi->ctrlr_wait); - INIT_WORK(&fbi->task, pxafb_task); - init_MUTEX(&fbi->ctrlr_sem); -@@ -1268,6 +1452,10 @@ - case 4: - case 8: - case 16: -+ case 18: -+ case 19: -+ case 24: -+ case 25: - inf->modes[0].bpp = bpp; - dev_info(dev, "overriding bit depth: %d\n", bpp); - break; -@@ -1416,7 +1604,7 @@ - fbi = pxafb_init_fbinfo(&dev->dev); - if (!fbi) { - dev_err(&dev->dev, "Failed to initialize framebuffer device\n"); -- ret = -ENOMEM; // only reason for pxafb_init_fbinfo to fail is kmalloc -+ ret = -ENOMEM; /* only reason for pxafb_init_fbinfo to fail is kmalloc */ - goto failed; - } - -@@ -1451,7 +1639,7 @@ - } - - #ifdef CONFIG_PM -- // TODO -+ /* TODO */ - #endif - - #ifdef CONFIG_CPU_FREQ -@@ -1464,7 +1652,12 @@ - /* - * Ok, now enable the LCD controller - */ -- set_ctrlr_state(fbi, C_ENABLE); -+ pxafb_set_ctrlr_state(fbi, C_ENABLE); -+//#ifdef CONFIG_PXA27x -+// LCCR4 |= (1 << 31); /* Disabel the PCD Divisor, PCDDIV */ -+// LCCR4 |= (5 << 17); /* Undocumented feature */ -+//#endif -+ init_waitqueue_head(&fcs_wait_eof); - - return 0; - ---- linux-2.6.24-rc1.orig/drivers/video/pxafb.h -+++ linux-2.6.24-rc1/drivers/video/pxafb.h -@@ -29,6 +29,60 @@ - unsigned int lccr3; - }; - -+struct pxafb_rgb { -+ struct fb_bitfield red; -+ struct fb_bitfield green; -+ struct fb_bitfield blue; -+ struct fb_bitfield transp; -+}; -+ -+#ifdef CONFIG_PXA27x -+/* PXA Overlay Framebuffer Support */ -+struct overlayfb_info -+{ -+ struct fb_info fb; -+ -+ struct fb_var_screeninfo old_var; -+ -+ struct semaphore mutex; -+ unsigned long refcount; -+ -+ struct pxafb_info *basefb; -+ -+ unsigned long map_cpu; -+ unsigned long screen_cpu; -+ unsigned long palette_cpu; -+ unsigned long map_size; -+ unsigned long palette_size; -+ -+ dma_addr_t screen_dma; -+ dma_addr_t map_dma; -+ dma_addr_t palette_dma; -+ -+ volatile u_char state; -+ -+ /* overlay specific info */ -+ unsigned long xpos; /* screen position (x, y)*/ -+ unsigned long ypos; -+ unsigned long format; -+ -+ /* additional */ -+ union { -+ struct pxafb_dma_descriptor *dma0; -+ struct pxafb_dma_descriptor *dma1; -+ struct { -+ struct pxafb_dma_descriptor *dma2; -+ struct pxafb_dma_descriptor *dma3; -+ struct pxafb_dma_descriptor *dma4; -+ }; -+ struct { -+ struct pxafb_dma_descriptor *dma5_pal; -+ struct pxafb_dma_descriptor *dma5_frame; -+ }; -+ }; -+}; -+#endif -+ - /* PXA LCD DMA descriptor */ - struct pxafb_dma_descriptor { - unsigned int fdadr; -@@ -90,6 +144,14 @@ - wait_queue_head_t ctrlr_wait; - struct work_struct task; - -+#ifdef CONFIG_PXA27x -+ /* PXA Overlay Framebuffer Support */ -+ struct overlayfb_info *overlay1fb; -+ struct overlayfb_info *overlay2fb; -+ struct overlayfb_info *cursorfb; -+#endif -+ void (*set_overlay_ctrlr_state)(struct pxafb_info *, u_int); -+ - #ifdef CONFIG_CPU_FREQ - struct notifier_block freq_transition; - struct notifier_block freq_policy; -@@ -109,6 +171,9 @@ - #define C_DISABLE_PM (5) - #define C_ENABLE_PM (6) - #define C_STARTUP (7) -+#define C_BLANK (8) -+#define C_UNBLANK (9) -+ - - #define PXA_NAME "PXA" - ---- /dev/null -+++ linux-2.6.24-rc1/drivers/video/pxafb_overlay.c -@@ -0,0 +1,1525 @@ -+/* -+ * linux/drivers/video/pxafb_overlay.c -+ * -+ * Copyright (c) 2004, Intel Corporation -+ * -+ * Code Status: -+ * 2004/10/28: -+ * - Ported to 2.6 kernel -+ * - Made overlay driver a loadable module -+ * - Merged overlay optimized patch -+ * 2004/03/10: -+ * - Fixed Bugs -+ * - Added workaround for overlay1&2 -+ * 2003/08/27: -+ * - Added Overlay 1 & Overlay2 & Hardware Cursor support -+ * -+ * -+ * This software program is licensed subject to the GNU Lesser General -+ * Public License (LGPL). Version 2.1, February 1999, available at -+ * http://www.gnu.org/copyleft/lesser.html -+ * -+ * Intel PXA27x LCD Controller Frame Buffer Overlay Driver -+ * -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "pxafb.h" -+ -+/* LCD enhancement : Overlay 1 & 2 & Hardware Cursor */ -+ -+/* -+ * LCD enhancement : Overlay 1 -+ * -+ * Features: -+ * - support 16bpp (No palette) -+ */ -+/* -+ * debugging? -+ */ -+#define DEBUG 0 -+ -+#ifdef DEBUG -+#define dbg(fmt,arg...) printk(KERN_ALERT "%s(): " fmt "\n", __FUNCTION__, ##arg) -+#else -+#define dbg(fmt,arg...) -+#endif -+ -+static int overlay1fb_enable(struct fb_info *info); -+static int overlay2fb_enable(struct fb_info *info); -+static int cursorfb_enable(struct fb_info *info); -+ -+static int overlay1fb_disable(struct fb_info *info); -+static int overlay2fb_disable(struct fb_info *info); -+static int cursorfb_disable(struct fb_info *info); -+ -+static int overlay1fb_blank(int blank, struct fb_info *info); -+static int overlay2fb_blank(int blank, struct fb_info *info); -+static int cursorfb_blank(int blank, struct fb_info *info); -+ -+extern void pxafb_set_ctrlr_state(struct pxafb_info *fbi, u_int state); -+extern int pxafb_blank(int blank, struct fb_info *info); -+ -+static struct pxafb_rgb def_rgb_18 = { -+ red: { offset: 12, length: 6, }, -+ green: { offset: 6, length: 6, }, -+ blue: { offset: 0, length: 6, }, -+ transp: { offset: 0, length: 0, }, -+}; -+ -+static struct pxafb_rgb def_rgbt_16 = { -+ red: { offset: 10, length: 5, }, -+ green: { offset: 5, length: 5, }, -+ blue: { offset: 0, length: 5, }, -+ transp: { offset: 15, length: 1, }, -+}; -+ -+static struct pxafb_rgb def_rgbt_19 = { -+ red: { offset: 12, length: 6, }, -+ green: { offset: 6, length: 6, }, -+ blue: { offset: 0, length: 6, }, -+ transp: { offset: 18, length: 1, }, -+}; -+ -+static struct pxafb_rgb def_rgbt_24 = { -+ red: { offset: 16, length: 7, }, -+ green: { offset: 8, length: 8, }, -+ blue: { offset: 0, length: 8, }, -+ transp: { offset: 0, length: 0, }, -+}; -+ -+static struct pxafb_rgb def_rgbt_25 = { -+ red: { offset: 16, length: 8, }, -+ green: { offset: 8, length: 8, }, -+ blue: { offset: 0, length: 8, }, -+ transp: { offset: 24, length: 1, }, -+}; -+ -+#define CLEAR_LCD_INTR(reg, intr) do { \ -+ reg = (intr); \ -+}while(0) -+ -+#define WAIT_FOR_LCD_INTR(reg,intr,timeout) ({ \ -+ int __done =0; \ -+ int __t = timeout; \ -+ while (__t) { \ -+ __done = (reg) & (intr); \ -+ if (__done) break; \ -+ mdelay(10); \ -+ __t--; \ -+ } \ -+ if (!__t) dbg("wait " #intr " timeount");\ -+ __done; \ -+}) -+ -+#define DISABLE_OVERLAYS(fbi) do { \ -+ if (fbi->overlay1fb && (fbi->overlay1fb->state == C_ENABLE)) { \ -+ overlay1fb_disable((struct fb_info*)fbi->overlay1fb); \ -+ } \ -+ if (fbi->overlay2fb && (fbi->overlay2fb->state == C_ENABLE)) { \ -+ overlay2fb_disable((struct fb_info*)fbi->overlay2fb); \ -+ } \ -+ if (fbi->cursorfb && (fbi->cursorfb->state == C_ENABLE)) { \ -+ cursorfb_disable((struct fb_info*)fbi->cursorfb); \ -+ } \ -+}while(0) -+ -+#define ENABLE_OVERLAYS(fbi) do { \ -+ if (fbi->overlay1fb && (fbi->overlay1fb->state == C_DISABLE)) { \ -+ overlay1fb_enable((struct fb_info*)fbi->overlay1fb); \ -+ } \ -+ if (fbi->overlay2fb && (fbi->overlay2fb->state == C_DISABLE)) { \ -+ overlay2fb_enable((struct fb_info*)fbi->overlay2fb); \ -+ } \ -+ if (fbi->cursorfb && (fbi->cursorfb->state == C_DISABLE)) { \ -+ cursorfb_enable((struct fb_info*)fbi->cursorfb); \ -+ } \ -+}while(0) -+ -+#define BLANK_OVERLAYS(fbi) do { \ -+ if (fbi->overlay1fb && (fbi->overlay1fb->state == C_ENABLE)) { \ -+ overlay1fb_disable((struct fb_info*)fbi->overlay1fb); \ -+ fbi->overlay1fb->state = C_BLANK; \ -+ } \ -+ if (fbi->overlay2fb && (fbi->overlay2fb->state == C_ENABLE)) { \ -+ overlay2fb_disable((struct fb_info*)fbi->overlay2fb); \ -+ fbi->overlay2fb->state = C_BLANK; \ -+ } \ -+ if (fbi->cursorfb && (fbi->cursorfb->state == C_ENABLE)) { \ -+ cursorfb_disable((struct fb_info*)fbi->cursorfb); \ -+ fbi->cursorfb->state = C_BLANK; \ -+ } \ -+}while(0) -+ -+#define UNBLANK_OVERLAYS(fbi) do { \ -+ if (fbi->overlay1fb && (fbi->overlay1fb->state == C_BLANK)) { \ -+ overlay1fb_enable((struct fb_info*)fbi->overlay1fb); \ -+ fbi->overlay1fb->state = C_ENABLE; \ -+ } \ -+ if (fbi->overlay2fb && (fbi->overlay2fb->state == C_BLANK)) { \ -+ overlay2fb_enable((struct fb_info*)fbi->overlay2fb); \ -+ fbi->overlay2fb->state = C_ENABLE; \ -+ } \ -+ if (fbi->cursorfb && (fbi->cursorfb->state == C_BLANK)) { \ -+ cursorfb_enable((struct fb_info*)fbi->cursorfb); \ -+ fbi->cursorfb->state = C_ENABLE; \ -+ } \ -+}while(0) -+ -+static int overlay1fb_open(struct fb_info *info, int user) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ int ret = 0; -+ -+/* If basefb is disable, enable fb. */ -+ if (fbi->basefb && fbi->basefb->state != C_ENABLE) -+ pxafb_blank(VESA_NO_BLANKING, (struct fb_info *)(fbi->basefb)); -+ -+ down(&fbi->mutex); -+ -+ if (fbi->refcount) -+ ret = -EACCES; -+ else -+ fbi->refcount ++; -+ -+ up(&fbi->mutex); -+ -+ /* Initialize the variables in overlay1 framebuffer. */ -+ fbi->fb.var.xres = fbi->fb.var.yres = 0; -+ fbi->fb.var.bits_per_pixel = 0; -+ -+ return ret; -+} -+ -+static int overlay1fb_release(struct fb_info *info, int user) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ down(&fbi->mutex); -+ -+ if (fbi->refcount) -+ fbi->refcount --; -+ -+ up(&fbi->mutex); -+ /* disable overlay when released */ -+ overlay1fb_blank(1, info); -+ -+ return 0; -+} -+ -+static int overlay1fb_map_video_memory(struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ -+ if (fbi->map_cpu) -+ dma_free_writecombine(NULL, fbi->map_size, (void*)fbi->map_cpu, fbi->map_dma); -+ fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE); -+ -+ fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size, -+ &fbi->map_dma, GFP_KERNEL ); -+ -+ if (!fbi->map_cpu) return -ENOMEM; -+ -+ fbi->screen_cpu = fbi->map_cpu + PAGE_SIZE; -+ fbi->screen_dma = fbi->map_dma + PAGE_SIZE; -+ -+ fbi->fb.fix.smem_start = fbi->screen_dma; -+ -+ /* setup dma descriptor */ -+ fbi->dma1 = (struct pxafb_dma_descriptor*) -+ (fbi->screen_cpu - sizeof(struct pxafb_dma_descriptor)); -+ -+ fbi->dma1->fdadr = (fbi->screen_dma - sizeof(struct pxafb_dma_descriptor)); -+ fbi->dma1->fsadr = fbi->screen_dma; -+ fbi->dma1->fidr = 0; -+ fbi->dma1->ldcmd = fbi->fb.fix.smem_len; -+ -+ return 0; -+} -+ -+static int overlay1fb_enable(struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ unsigned long bpp1; -+ -+ if (!fbi->map_cpu) return -EINVAL; -+ -+ switch (fbi->fb.var.bits_per_pixel) { -+ case 16: -+ bpp1 = 0x4; -+ break; -+ case 18: -+ bpp1 = 0x6; -+ break; -+ case 19: -+ bpp1 = 0x8; -+ break; -+ case 24: -+ bpp1 = 0x9; -+ break; -+ case 25: -+ bpp1 = 0xa; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ /* disable branch/start/end of frame interrupt */ -+ LCCR5 |= (LCCR5_IUM1 | LCCR5_BSM1 | LCCR5_EOFM1 | LCCR5_SOFM1); -+ -+ if (fbi->state == C_DISABLE || fbi->state == C_BLANK) -+ FDADR1 = (fbi->dma1->fdadr); -+ else -+ FBR1 = fbi->dma1->fdadr | 0x1; -+ -+ /* enable overlay 1 window */ -+ OVL1C2 = (fbi->ypos << 10) | fbi->xpos; -+ OVL1C1 = OVL1C1_O1EN | (bpp1 << 20) | ((fbi->fb.var.yres-1)<<10) | (fbi->fb.var.xres-1); -+ -+ fbi->state = C_ENABLE; -+ -+ return 0; -+} -+ -+static int overlay1fb_disable(struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*)info; -+ int done; -+ -+ if ((fbi->state == C_DISABLE) || (fbi->state == C_BLANK)) -+ return 0; -+ -+ fbi->state = C_DISABLE; -+ -+ /* clear O1EN */ -+ OVL1C1 &= ~OVL1C1_O1EN; -+ -+ CLEAR_LCD_INTR(LCSR1, LCSR1_BS1); -+ FBR1 = 0x3; -+ done = WAIT_FOR_LCD_INTR(LCSR1, LCSR1_BS1, 100); -+ -+ if (!done) { -+ pr_debug(KERN_INFO "%s: timeout\n", __FUNCTION__); -+ return -1; -+ } -+ return 0; -+} -+ -+static int overlay1fb_blank(int blank, struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ int err=0; -+ -+ switch (blank) { -+ case 0: -+ err = overlay1fb_enable(info); -+ if (err) { -+ fbi->state = C_DISABLE; -+ pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE); -+ } -+ break; -+ case 1: -+ err = overlay1fb_disable(info); -+ if (err) { -+ fbi->state = C_DISABLE; -+ pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE); -+ } -+ break; -+ default: -+ break; -+ } -+ -+ return err; -+} -+ -+static int overlay1fb_check_var( struct fb_var_screeninfo *var, struct fb_info *info) -+{ -+ int xpos, ypos; -+ struct overlayfb_info *fbi=(struct overlayfb_info*)info; -+ -+ /* must in base frame */ -+ xpos = (var->nonstd & 0x3ff); -+ ypos = ((var->nonstd>>10) & 0x3ff); -+ -+ if ( (xpos + var->xres) > fbi->basefb->fb.var.xres ) -+ return -EINVAL; -+ -+ if ( (ypos + var->yres) > fbi->basefb->fb.var.yres ) -+ return -EINVAL; -+ -+ switch (var->bits_per_pixel) { -+ case 16: -+ if ( var->xres & 0x1 ) { -+ printk("xres should be a multiple of 2 pixels!\n"); -+ return -EINVAL; -+ } -+ break; -+ case 18: -+ case 19: -+ if ( var->xres & 0x7 ) { -+ printk("xres should be a multiple of 8 pixels!\n"); -+ return -EINVAL; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ fbi->old_var=*var; -+ -+ var->activate=FB_ACTIVATE_NOW; -+ -+ return 0; -+} -+ -+ -+static int overlay1fb_set_par(struct fb_info *info) -+{ -+ int nbytes=0, err=0, pixels_per_line=0; -+ -+ struct overlayfb_info *fbi=(struct overlayfb_info*)info; -+ struct fb_var_screeninfo *var = &fbi->fb.var; -+ -+ info->flags &= ~FBINFO_MISC_USEREVENT; -+ -+ if (fbi->state == C_BLANK) -+ return 0; -+ -+ if (fbi->state == C_DISABLE) -+ goto out1; -+ -+ /* only xpos & ypos change */ -+ if ( (var->xres == fbi->old_var.xres) && -+ (var->yres == fbi->old_var.yres) && -+ (var->bits_per_pixel == fbi->old_var.bits_per_pixel) ) -+ goto out2; -+ -+out1: -+ switch(var->bits_per_pixel) { -+ case 16: -+ /* 2 pixels per line */ -+ pixels_per_line = (fbi->fb.var.xres + 0x1) & (~0x1); -+ nbytes = 2; -+ -+ var->red = def_rgbt_16.red; -+ var->green = def_rgbt_16.green; -+ var->blue = def_rgbt_16.blue; -+ var->transp = def_rgbt_16.transp; -+ -+ break; -+ case 18: -+ /* 8 pixels per line */ -+ pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7); -+ nbytes = 3; -+ -+ var->red = def_rgb_18.red; -+ var->green = def_rgb_18.green; -+ var->blue = def_rgb_18.blue; -+ var->transp = def_rgb_18.transp; -+ -+ break; -+ case 19: -+ /* 8 pixels per line */ -+ pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7); -+ nbytes = 3; -+ -+ var->red = def_rgbt_19.red; -+ var->green = def_rgbt_19.green; -+ var->blue = def_rgbt_19.blue; -+ var->transp = def_rgbt_19.transp; -+ -+ break; -+ case 24: -+ pixels_per_line = fbi->fb.var.xres; -+ nbytes = 4; -+ -+ var->red = def_rgbt_24.red; -+ var->green = def_rgbt_24.green; -+ var->blue = def_rgbt_24.blue; -+ var->transp = def_rgbt_24.transp; -+ -+ break; -+ case 25: -+ pixels_per_line = fbi->fb.var.xres; -+ nbytes = 4; -+ -+ var->red = def_rgbt_25.red; -+ var->green = def_rgbt_25.green; -+ var->blue = def_rgbt_25.blue; -+ var->transp = def_rgbt_25.transp; -+ -+ break; -+ } -+ -+ fbi->fb.fix.line_length = nbytes * pixels_per_line; -+ fbi->fb.fix.smem_len = fbi->fb.fix.line_length * fbi->fb.var.yres; -+ -+ err= overlay1fb_map_video_memory((struct fb_info*)fbi); -+ -+ if (err) -+ return err; -+ -+out2: -+ fbi->xpos = var->nonstd & 0x3ff; -+ fbi->ypos = (var->nonstd>>10) & 0x3ff; -+ -+ overlay1fb_enable(info); -+ -+ return 0; -+ -+} -+ -+static struct fb_ops overlay1fb_ops = { -+ .owner = THIS_MODULE, -+ .fb_open = overlay1fb_open, -+ .fb_release = overlay1fb_release, -+ .fb_check_var = overlay1fb_check_var, -+ .fb_set_par = overlay1fb_set_par, -+ .fb_blank = overlay1fb_blank, -+ .fb_fillrect = cfb_fillrect, -+ .fb_copyarea = cfb_copyarea, -+ .fb_imageblit = cfb_imageblit, -+}; -+ -+ /* -+ * LCD enhancement : Overlay 2 -+ * -+ * Features: -+ * - support planar YCbCr420/YCbCr422/YCbCr444; -+ */ -+static int overlay2fb_open(struct fb_info *info, int user) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ int ret = 0; -+ -+ /* if basefb is disable, enable fb. */ -+ if (fbi->basefb && fbi->basefb->state != C_ENABLE) -+ pxafb_blank(VESA_NO_BLANKING, (struct fb_info *)(fbi->basefb)); -+ -+ down(&fbi->mutex); -+ -+ if (fbi->refcount) -+ ret = -EACCES; -+ else -+ fbi->refcount ++; -+ -+ up(&fbi->mutex); -+ fbi->fb.var.xres = fbi->fb.var.yres = 0; -+ -+ return ret; -+} -+ -+static int overlay2fb_release(struct fb_info *info, int user) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ -+ down(&fbi->mutex); -+ -+ if (fbi->refcount) -+ fbi->refcount --; -+ -+ up(&fbi->mutex); -+ -+ /* disable overlay when released */ -+ overlay2fb_blank(1, info); -+ -+ return 0; -+} -+ -+static int overlay2fb_map_YUV_memory( struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ unsigned int ylen, cblen, crlen, aylen, acblen, acrlen; -+ unsigned int yoff, cboff, croff; -+ unsigned int xres,yres; -+ unsigned int nbytes; -+ -+ ylen = cblen = crlen = aylen = acblen = acrlen = 0; -+ yoff = cboff = croff = 0; -+ -+ if (fbi->map_cpu) -+ dma_free_writecombine(NULL, fbi->map_size, (void*)fbi->map_cpu, fbi->map_dma); -+ -+ yres = fbi->fb.var.yres; -+ -+ switch(fbi->format) { -+ case 0x4: /* YCbCr 4:2:0 planar */ -+ pr_debug("420 planar\n"); -+ /* 16 pixels per line */ -+ xres = (fbi->fb.var.xres + 0xf) & (~0xf); -+ fbi->fb.fix.line_length = xres; -+ -+ nbytes = xres * yres; -+ ylen = nbytes; -+ cblen = crlen = (nbytes/4); -+ -+ break; -+ case 0x3: /* YCbCr 4:2:2 planar */ -+ /* 8 pixles per line */ -+ pr_debug("422 planar\n"); -+ xres = (fbi->fb.var.xres + 0x7) & (~0x7); -+ fbi->fb.fix.line_length = xres; -+ -+ nbytes = xres * yres; -+ ylen = nbytes; -+ cblen = crlen = (nbytes/2); -+ -+ break; -+ case 0x2: /* YCbCr 4:4:4 planar */ -+ /* 4 pixels per line */ -+ pr_debug("444 planar\n"); -+ xres = (fbi->fb.var.xres + 0x3) & (~0x3); -+ fbi->fb.fix.line_length = xres; -+ -+ nbytes = xres * yres; -+ ylen = cblen = crlen = nbytes; -+ break; -+ } -+ -+ /* 16-bytes alignment for DMA */ -+ aylen = (ylen + 0xf) & (~0xf); -+ acblen = (cblen + 0xf) & (~0xf); -+ acrlen = (crlen + 0xf) & (~0xf); -+ -+ fbi->fb.fix.smem_len = aylen + acblen + acrlen; -+ -+ /* alloc memory */ -+ -+ fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE); -+ fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size, -+ &fbi->map_dma, GFP_KERNEL ); -+ -+ if (!fbi->map_cpu) return -ENOMEM; -+ -+ fbi->screen_cpu = fbi->map_cpu + PAGE_SIZE; -+ fbi->screen_dma = fbi->map_dma + PAGE_SIZE; -+ -+ fbi->fb.fix.smem_start = fbi->screen_dma; -+ -+ /* setup dma for Planar format */ -+ fbi->dma2 = (struct pxafb_dma_descriptor*) -+ (fbi->screen_cpu - sizeof(struct pxafb_dma_descriptor)); -+ fbi->dma3 = fbi->dma2 - 1; -+ fbi->dma4 = fbi->dma3 - 1; -+ -+ /* offset */ -+ yoff = 0; -+ cboff = aylen; -+ croff = cboff + acblen; -+ -+ /* Y vector */ -+ fbi->dma2->fdadr = (fbi->screen_dma - sizeof(struct pxafb_dma_descriptor)); -+ fbi->dma2->fsadr = fbi->screen_dma + yoff; -+ fbi->dma2->fidr = 0; -+ fbi->dma2->ldcmd = ylen; -+ -+ /* Cb vector */ -+ fbi->dma3->fdadr = (fbi->dma2->fdadr - sizeof(struct pxafb_dma_descriptor)); -+ fbi->dma3->fsadr = (fbi->screen_dma + cboff); -+ fbi->dma3->fidr = 0; -+ fbi->dma3->ldcmd = cblen; -+ -+ /* Cr vector */ -+ -+ fbi->dma4->fdadr = (fbi->dma3->fdadr - sizeof(struct pxafb_dma_descriptor)); -+ fbi->dma4->fsadr = (fbi->screen_dma + croff); -+ fbi->dma4->fidr = 0; -+ fbi->dma4->ldcmd = crlen; -+ -+ /* adjust for user */ -+ fbi->fb.var.red.length = ylen; -+ fbi->fb.var.red.offset = yoff; -+ fbi->fb.var.green.length = cblen; -+ fbi->fb.var.green.offset = cboff; -+ fbi->fb.var.blue.length = crlen; -+ fbi->fb.var.blue.offset = croff; -+ -+ return 0; -+}; -+ -+static int overlay2fb_map_RGB_memory( struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ struct fb_var_screeninfo *var = &fbi->fb.var; -+ int pixels_per_line=0 , nbytes=0; -+ -+ if (fbi->map_cpu) -+ dma_free_writecombine(NULL, fbi->map_size, (void*)fbi->map_cpu, fbi->map_dma); -+ -+ switch(var->bits_per_pixel) { -+ case 16: -+ /* 2 pixels per line */ -+ pixels_per_line = (fbi->fb.var.xres + 0x1) & (~0x1); -+ nbytes = 2; -+ -+ var->red = def_rgbt_16.red; -+ var->green = def_rgbt_16.green; -+ var->blue = def_rgbt_16.blue; -+ var->transp = def_rgbt_16.transp; -+ break; -+ -+ case 18: -+ /* 8 pixels per line */ -+ pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7); -+ nbytes = 3; -+ -+ var->red = def_rgb_18.red; -+ var->green = def_rgb_18.green; -+ var->blue = def_rgb_18.blue; -+ var->transp = def_rgb_18.transp; -+ -+ break; -+ case 19: -+ /* 8 pixels per line */ -+ pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7); -+ nbytes = 3; -+ -+ var->red = def_rgbt_19.red; -+ var->green = def_rgbt_19.green; -+ var->blue = def_rgbt_19.blue; -+ var->transp = def_rgbt_19.transp; -+ -+ break; -+ case 24: -+ pixels_per_line = fbi->fb.var.xres; -+ nbytes = 4; -+ -+ var->red = def_rgbt_24.red; -+ var->green = def_rgbt_24.green; -+ var->blue = def_rgbt_24.blue; -+ var->transp = def_rgbt_24.transp; -+ -+ break; -+ -+ case 25: -+ pixels_per_line = fbi->fb.var.xres; -+ nbytes = 4; -+ -+ var->red = def_rgbt_25.red; -+ var->green = def_rgbt_25.green; -+ var->blue = def_rgbt_25.blue; -+ var->transp = def_rgbt_25.transp; -+ -+ break; -+ } -+ -+ fbi->fb.fix.line_length = nbytes * pixels_per_line; -+ fbi->fb.fix.smem_len = fbi->fb.fix.line_length * fbi->fb.var.yres; -+ -+ fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE); -+ fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size, -+ &fbi->map_dma, GFP_KERNEL ); -+ -+ if (!fbi->map_cpu) return -ENOMEM; -+ -+ fbi->screen_cpu = fbi->map_cpu + PAGE_SIZE; -+ fbi->screen_dma = fbi->map_dma + PAGE_SIZE; -+ -+ fbi->fb.fix.smem_start = fbi->screen_dma; -+ -+ /* setup dma descriptor */ -+ fbi->dma2 = (struct pxafb_dma_descriptor*) -+ (fbi->screen_cpu - sizeof(struct pxafb_dma_descriptor)); -+ -+ fbi->dma2->fdadr = (fbi->screen_dma - sizeof(struct pxafb_dma_descriptor)); -+ fbi->dma2->fsadr = fbi->screen_dma; -+ fbi->dma2->fidr = 0; -+ fbi->dma2->ldcmd = fbi->fb.fix.smem_len; -+ -+ return 0; -+} -+ -+static int overlay2fb_enable(struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ unsigned long bpp2; -+ unsigned int xres, yres; -+ -+ if (!fbi->map_cpu) return -EINVAL; -+ -+ switch(fbi->fb.var.bits_per_pixel) { -+ case 16: -+ bpp2 = 0x4; -+ break; -+ case 18: -+ bpp2 = 0x6; -+ break; -+ case 19: -+ bpp2 = 0x8; -+ break; -+ case 24: -+ bpp2 = 0x9; -+ break; -+ case 25: -+ bpp2 = 0xa; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ /* disable branch/start/end of frame interrupt */ -+ LCCR5 |= (LCCR5_IUM4 | LCCR5_IUM3 | LCCR5_IUM2 | -+ LCCR5_BSM4 | LCCR5_BSM3 | LCCR5_BSM2 | -+ LCCR5_EOFM4 | LCCR5_EOFM3 | LCCR5_EOFM2 | -+ LCCR5_SOFM4 | LCCR5_SOFM3 | LCCR5_SOFM2); -+ -+ if (fbi->format == 0) { -+ /* overlay2 RGB resolution, RGB and YUV have different xres value*/ -+ xres = fbi->fb.var.xres; -+ yres = fbi->fb.var.yres; -+ -+ OVL2C2 = (fbi->format << 20) | (fbi->ypos << 10) | fbi->xpos; -+ OVL2C1 = OVL2C1_O2EN | (bpp2 << 20) | ((yres-1)<<10) | (xres-1); -+ /* setup RGB DMA */ -+ if (fbi->state == C_DISABLE || fbi->state == C_BLANK) -+ FDADR2 = fbi->dma2->fdadr; -+ else -+ FBR2 = fbi->dma2->fdadr | 0x1; -+ } else { -+ /* overlay2 YUV resolution */ -+ xres = fbi->fb.fix.line_length; -+ yres = fbi->fb.var.yres; -+ -+ OVL2C2 = (fbi->format << 20) | (fbi->ypos << 10) | fbi->xpos; -+ OVL2C1 = OVL2C1_O2EN | (bpp2 << 20) | ((yres-1)<<10) | (xres-1); -+ -+ if (fbi->state == C_DISABLE || fbi->state == C_BLANK) { -+ FDADR2 = fbi->dma2->fdadr; -+ FDADR3 = fbi->dma3->fdadr; -+ FDADR4 = fbi->dma4->fdadr; -+ } else { -+ FBR2 = fbi->dma2->fdadr | 0x01; -+ FBR3 = fbi->dma3->fdadr | 0x01; -+ FBR4 = fbi->dma4->fdadr | 0x01; -+ } -+ } -+ -+ fbi->state = C_ENABLE; -+ return 0; -+} -+ -+static int overlay2fb_disable(struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*)info; -+ int done; -+ -+ if (fbi->state == C_DISABLE) -+ return 0; -+ if (fbi->state == C_BLANK) { -+ fbi->state = C_DISABLE; -+ return 0; -+ } -+ -+ fbi->state = C_DISABLE; -+ -+ /* clear O2EN */ -+ OVL2C1 &= ~OVL2C1_O2EN; -+ -+ /* Make overlay2 can't disable/enable -+ * correctly sometimes. -+ */ -+ CLEAR_LCD_INTR(LCSR1, LCSR1_BS2); -+ -+ if (fbi->format == 0) -+ FBR2 = 0x3; -+ else { -+ FBR2 = 0x3; -+ FBR3 = 0x3; -+ FBR4 = 0x3; -+ } -+ -+ done = WAIT_FOR_LCD_INTR(LCSR1, LCSR1_BS2, 100); -+ -+ if (!done) { -+ pr_debug(KERN_INFO "%s: timeout\n", __FUNCTION__); -+ return -1; -+ } -+ return 0; -+} -+ -+static int overlay2fb_blank(int blank, struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ int err=0; -+ -+ switch(blank) -+ { -+ case 0: -+ err = overlay2fb_enable(info); -+ if (err) { -+ fbi->state = C_DISABLE; -+ pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE); -+ } -+ break; -+ case 1: -+ err = overlay2fb_disable(info); -+ if (err) { -+ fbi->state = C_DISABLE; -+ pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE); -+ } -+ break; -+ default: -+ /* reserved */ -+ break; -+ } -+ -+ return err; -+} -+ -+ -+static int overlay2fb_check_var( struct fb_var_screeninfo *var, struct fb_info *info) -+{ -+ int xpos, ypos, xres, yres; -+ int format; -+ struct overlayfb_info *fbi=(struct overlayfb_info*)info; -+ -+ xres=yres=0; -+ -+ xpos = (var->nonstd & 0x3ff); -+ ypos = (var->nonstd >> 10) & 0x3ff; -+ format = (var->nonstd >>20) & 0x7; -+ -+ -+ /* Palnar YCbCr444, YCbCr422, YCbCr420 */ -+ if ( (format != 0x4) && (format != 0x3) && (format != 0x2) && (format !=0x0)) -+ return -EINVAL; -+ -+ /* dummy pixels */ -+ switch(format) { -+ case 0x0: /* RGB */ -+ xres = var->xres; -+ break; -+ case 0x2: /* 444 */ -+ xres = (var->xres + 0x3) & ~(0x3); -+ break; -+ case 0x3: /* 422 */ -+ xres = (var->xres + 0x7) & ~(0x7); -+ break; -+ case 0x4: /* 420 */ -+ xres = (var->xres + 0xf) & ~(0xf); -+ break; -+ } -+ yres = var->yres; -+ -+ if ( (xpos + xres) > fbi->basefb->fb.var.xres ) -+ return -EINVAL; -+ -+ if ( (ypos + yres) > fbi->basefb->fb.var.yres ) -+ return -EINVAL; -+ -+ fbi->old_var=*var; -+ -+ var->activate=FB_ACTIVATE_NOW; -+ -+ return 0; -+ -+} -+ -+ -+/* -+ * overlay2fb_set_var() -+ * -+ * var.nonstd is used as YCbCr format. -+ * var.red/green/blue is used as (Y/Cb/Cr) vector -+ */ -+ -+static int overlay2fb_set_par(struct fb_info *info) -+{ -+ unsigned int xpos, ypos; -+ int format, err; -+ -+ struct overlayfb_info *fbi=(struct overlayfb_info*)info; -+ struct fb_var_screeninfo *var = &fbi->fb.var; -+ -+ info->flags &= ~FBINFO_MISC_USEREVENT; -+ -+ if (fbi->state == C_BLANK) -+ return 0; -+ -+ if (fbi->state == C_DISABLE) -+ goto out1; -+ -+ if ( (var->xres == fbi->old_var.xres) && -+ (var->yres == fbi->old_var.yres) && -+ (var->bits_per_pixel == fbi->old_var.bits_per_pixel) && -+ (((var->nonstd>>20) & 0x7) == fbi->format) ) -+ goto out2; -+ -+out1: -+ xpos = var->nonstd & 0x3ff; -+ ypos = (var->nonstd>>10) & 0x3ff; -+ format = (var->nonstd>>20) & 0x7; -+ -+ -+ fbi->format = format; -+ if ( fbi->format==0 ) -+ err = overlay2fb_map_RGB_memory(info); -+ else -+ err = overlay2fb_map_YUV_memory(info); -+ -+ if (err) return err; -+ -+out2: -+ /* position */ -+ fbi->xpos = var->nonstd & 0x3ff; -+ fbi->ypos = (var->nonstd>>10) & 0x3ff; -+ -+ overlay2fb_enable(info); -+ -+ return 0; -+} -+ -+static struct fb_ops overlay2fb_ops = { -+ .owner = THIS_MODULE, -+ .fb_open = overlay2fb_open, -+ .fb_release = overlay2fb_release, -+ .fb_check_var = overlay2fb_check_var, -+ .fb_set_par = overlay2fb_set_par, -+ .fb_blank = overlay2fb_blank, -+ .fb_fillrect = cfb_fillrect, -+ .fb_copyarea = cfb_copyarea, -+ .fb_imageblit = cfb_imageblit, -+}; -+ -+/* Hardware cursor */ -+ -+/* Bulverde Cursor Modes */ -+struct cursorfb_mode{ -+ int xres; -+ int yres; -+ int bpp; -+}; -+ -+static struct cursorfb_mode cursorfb_modes[]={ -+ { 32, 32, 2}, -+ { 32, 32, 2}, -+ { 32, 32, 2}, -+ { 64, 64, 2}, -+ { 64, 64, 2}, -+ { 64, 64, 2}, -+ {128, 128, 1}, -+ {128, 128, 1} -+}; -+ -+static int cursorfb_enable(struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ -+ if (!fbi->map_cpu) return -EINVAL; -+ -+ CCR &= ~CCR_CEN; -+ -+ /* set palette format -+ * -+ * FIXME: if only cursor uses palette -+ */ -+ LCCR4 = (LCCR4 & (~(0x3<<15))) | (0x1<<15); -+ -+ /* disable branch/start/end of frame interrupt */ -+ LCCR5 |= (LCCR5_IUM5 | LCCR5_BSM5 | LCCR5_EOFM5 | LCCR5_SOFM5); -+ -+ /* load palette and frame data */ -+ if (fbi->state == C_DISABLE) { -+ FDADR5 = fbi->dma5_pal->fdadr; -+ udelay(1); -+ FDADR5 = fbi->dma5_frame->fdadr; -+ udelay(1); -+ -+ } -+ else { -+ FBR5 = fbi->dma5_pal->fdadr | 0x1; -+ udelay(1); -+ FBR5 = fbi->dma5_frame->fdadr | 0x1; -+ udelay(1); -+ } -+ -+ CCR = CCR_CEN | (fbi->ypos << 15) | (fbi->xpos << 5) | (fbi->format); -+ -+ fbi->state = C_ENABLE; -+ -+ return 0; -+} -+ -+static int cursorfb_disable(struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*)info; -+ int done, ret = 0; -+ -+ fbi->state = C_DISABLE; -+ -+ done = WAIT_FOR_LCD_INTR(LCSR1, LCSR1_BS5, 100); -+ if (!done) ret = -1; -+ -+ CCR &= ~CCR_CEN; -+ -+ return ret; -+} -+ -+static int cursorfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, -+ u_int trans, struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info *)info; -+ u_int val, ret = 1; -+ u_int *pal=(u_int*) fbi->palette_cpu; -+ -+ /* 25bit with Transparcy for 16bpp format */ -+ if (regno < fbi->palette_size) { -+ val = ((trans << 24) & 0x1000000); -+ val |= ((red << 16) & 0x0ff0000); -+ val |= ((green << 8 ) & 0x000ff00); -+ val |= ((blue << 0) & 0x00000ff); -+ -+ pal[regno] = val; -+ ret = 0; -+ } -+ return ret; -+} -+ -+int cursorfb_blank(int blank, struct fb_info *info) -+{ -+ switch(blank) -+ { -+ case 0: -+ cursorfb_enable(info); -+ break; -+ case 1: -+ cursorfb_disable(info); -+ break; -+ default: -+ /* reserved */ -+ break; -+ } -+ return 0; -+} -+ -+static int cursorfb_check_var( struct fb_var_screeninfo *var, struct fb_info *info) -+{ -+ int xpos, ypos, xres, yres; -+ int mode; -+ struct cursorfb_mode *cursor; -+ struct overlayfb_info *fbi=(struct overlayfb_info*)info; -+ -+ mode = var->nonstd & 0x7; -+ xpos = (var->nonstd>>5) & 0x3ff; -+ ypos = (var->nonstd>>15) & 0x3ff; -+ -+ if (mode>7 || mode <0 ) -+ return -EINVAL; -+ -+ cursor = cursorfb_modes + mode; -+ -+ xres = cursor->xres; -+ yres = cursor->yres; -+ -+ if ( (xpos + xres) > fbi->basefb->fb.var.xres ) -+ return -EINVAL; -+ -+ if ( (ypos + yres) > fbi->basefb->fb.var.yres ) -+ return -EINVAL; -+ -+ return 0; -+ -+} -+ -+static int cursorfb_set_par(struct fb_info *info) -+{ -+ struct overlayfb_info *fbi = (struct overlayfb_info*) info; -+ struct fb_var_screeninfo *var = &fbi->fb.var; -+ struct cursorfb_mode *cursor; -+ int mode, xpos, ypos; -+ int err; -+ -+ info->flags &= ~FBINFO_MISC_USEREVENT; -+ -+ mode = var->nonstd & 0x7; -+ xpos = (var->nonstd>>5) & 0x3ff; -+ ypos = (var->nonstd>>15) & 0x3ff; -+ -+ if (mode != fbi->format) { -+ cursor = cursorfb_modes + mode; -+ -+ /* update "var" info */ -+ fbi->fb.var.xres = cursor->xres; -+ fbi->fb.var.yres = cursor->yres; -+ fbi->fb.var.bits_per_pixel = cursor->bpp; -+ -+ /* alloc video memory -+ * -+ * 4k is engouh for 128x128x1 cursor, -+ * - 2k for cursor pixels, -+ * - 2k for palette data, plus 2 dma descriptor -+ */ -+ if (!fbi->map_cpu) { -+ fbi->map_size = PAGE_SIZE; -+ fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size, -+ &fbi->map_dma, GFP_KERNEL ); -+ if (!fbi->map_cpu) return -ENOMEM; -+ } -+ -+ cursor = cursorfb_modes + mode; -+ -+ /* update overlay & fix "info" */ -+ fbi->screen_cpu = fbi->map_cpu; -+ fbi->palette_cpu = fbi->map_cpu + (PAGE_SIZE/2); -+ fbi->screen_dma = fbi->map_dma; -+ fbi->palette_dma = fbi->map_dma + (PAGE_SIZE/2); -+ -+ fbi->format = mode; -+ fbi->palette_size = (1<bpp); -+ fbi->fb.fix.smem_start = fbi->screen_dma; -+ fbi->fb.fix.smem_len = cursor->xres * cursor->yres * cursor->bpp / 8; -+ fbi->fb.fix.line_length = cursor->xres * cursor->bpp / 8; -+ -+ fbi->dma5_pal = (struct pxafb_dma_descriptor*)(fbi->map_cpu + PAGE_SIZE - 16 ); -+ fbi->dma5_pal->fdadr = (fbi->map_dma + PAGE_SIZE - 16); -+ fbi->dma5_pal->fsadr = fbi->palette_dma; -+ fbi->dma5_pal->fidr = 0; -+ fbi->dma5_pal->ldcmd = (fbi->palette_size<<2) | LDCMD_PAL; -+ -+ fbi->dma5_frame = (struct pxafb_dma_descriptor*)(fbi->map_cpu + PAGE_SIZE - 32 ); -+ fbi->dma5_frame->fdadr = (fbi->map_dma + PAGE_SIZE - 32); -+ fbi->dma5_frame->fsadr = fbi->screen_dma; -+ fbi->dma5_frame->fidr = 0; -+ fbi->dma5_frame->ldcmd = fbi->fb.fix.smem_len; -+ -+ /* alloc & set default cmap */ -+ err = fb_alloc_cmap(&fbi->fb.cmap, fbi->palette_size, 0); -+ if (err) return err; -+ err = fb_set_cmap(&fbi->fb.cmap, info); -+ if (err) return err; -+ } -+ -+ /* update overlay info */ -+ if ( (xpos != fbi->xpos) || (ypos != fbi->ypos) ) { -+ fbi->xpos = xpos; -+ fbi->ypos = ypos; -+ } -+ -+ cursorfb_enable(info); -+ pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE); -+ -+ return 0; -+} -+ -+static struct fb_ops cursorfb_ops = { -+ .owner = THIS_MODULE, -+ .fb_check_var = cursorfb_check_var, -+ .fb_set_par = cursorfb_set_par, -+ .fb_blank = cursorfb_blank, -+ .fb_fillrect = cfb_fillrect, -+ .fb_copyarea = cfb_copyarea, -+ .fb_imageblit = cfb_imageblit, -+ .fb_setcolreg = cursorfb_setcolreg, -+}; -+ -+static struct overlayfb_info * __init overlay1fb_init_fbinfo(void) -+{ -+ struct overlayfb_info *fbi; -+ -+ fbi = kmalloc(sizeof(struct overlayfb_info) + sizeof(u16) * 16, GFP_KERNEL); -+ if (!fbi) -+ return NULL; -+ -+ memset(fbi, 0, sizeof(struct overlayfb_info) ); -+ -+ fbi->refcount = 0; -+ init_MUTEX(&fbi->mutex); -+ -+ strcpy(fbi->fb.fix.id, "overlay1"); -+ -+ fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; -+ fbi->fb.fix.type_aux = 0; -+ fbi->fb.fix.xpanstep = 0; -+ fbi->fb.fix.ypanstep = 0; -+ fbi->fb.fix.ywrapstep = 0; -+ fbi->fb.fix.accel = FB_ACCEL_NONE; -+ -+ fbi->fb.var.nonstd = 0; -+ fbi->fb.var.activate = FB_ACTIVATE_NOW; -+ fbi->fb.var.height = -1; -+ fbi->fb.var.width = -1; -+ fbi->fb.var.accel_flags = 0; -+ fbi->fb.var.vmode = FB_VMODE_NONINTERLACED; -+ -+ -+ fbi->fb.fbops = &overlay1fb_ops; -+ fbi->fb.flags = FBINFO_FLAG_DEFAULT; -+ fbi->fb.node = -1; -+ fbi->fb.pseudo_palette = NULL; -+ -+ fbi->xpos = 0; -+ fbi->ypos = 0; -+ fbi->format = -1; -+ fbi->state = C_DISABLE; -+ -+ return fbi; -+} -+ -+static struct overlayfb_info * __init overlay2fb_init_fbinfo(void) -+{ -+ struct overlayfb_info *fbi; -+ -+ fbi = kmalloc(sizeof(struct overlayfb_info) + sizeof(u16) * 16, GFP_KERNEL); -+ if (!fbi) -+ return NULL; -+ -+ memset(fbi, 0, sizeof(struct overlayfb_info) ); -+ -+ fbi->refcount = 0; -+ init_MUTEX(&fbi->mutex); -+ -+ strcpy(fbi->fb.fix.id, "overlay2"); -+ -+ fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; -+ fbi->fb.fix.type_aux = 0; -+ fbi->fb.fix.xpanstep = 0; -+ fbi->fb.fix.ypanstep = 0; -+ fbi->fb.fix.ywrapstep = 0; -+ fbi->fb.fix.accel = FB_ACCEL_NONE; -+ -+ fbi->fb.var.nonstd = 0; -+ fbi->fb.var.activate = FB_ACTIVATE_NOW; -+ fbi->fb.var.height = -1; -+ fbi->fb.var.width = -1; -+ fbi->fb.var.accel_flags = 0; -+ fbi->fb.var.vmode = FB_VMODE_NONINTERLACED; -+ -+ fbi->fb.fbops = &overlay2fb_ops; -+ fbi->fb.flags = FBINFO_FLAG_DEFAULT; -+ fbi->fb.node = -1; -+ fbi->fb.pseudo_palette = NULL; -+ -+ fbi->xpos = 0; -+ fbi->ypos = 0; -+ fbi->format = -1; -+ fbi->state = C_DISABLE; -+ -+ return fbi; -+} -+ -+static struct overlayfb_info * __init cursorfb_init_fbinfo(void) -+{ -+ struct overlayfb_info *fbi; -+ -+ fbi = kmalloc(sizeof(struct overlayfb_info) + sizeof(u16) * 16, GFP_KERNEL); -+ if (!fbi) -+ return NULL; -+ -+ memset(fbi, 0, sizeof(struct overlayfb_info) ); -+ -+ fbi->refcount = 0; -+ init_MUTEX(&fbi->mutex); -+ -+ strcpy(fbi->fb.fix.id, "cursor"); -+ -+ fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; -+ fbi->fb.fix.type_aux = 0; -+ fbi->fb.fix.xpanstep = 0; -+ fbi->fb.fix.ypanstep = 0; -+ fbi->fb.fix.ywrapstep = 0; -+ fbi->fb.fix.accel = FB_ACCEL_NONE; -+ -+ fbi->fb.var.nonstd = 0; -+ fbi->fb.var.activate = FB_ACTIVATE_NOW; -+ fbi->fb.var.height = -1; -+ fbi->fb.var.width = -1; -+ fbi->fb.var.accel_flags = 0; -+ fbi->fb.var.vmode = FB_VMODE_NONINTERLACED; -+ -+ fbi->fb.fbops = &cursorfb_ops; -+ fbi->fb.flags = FBINFO_FLAG_DEFAULT; -+ fbi->fb.node = -1; -+ fbi->fb.pseudo_palette = NULL; -+ -+ -+ fbi->xpos = 0; -+ fbi->ypos = 0; -+ fbi->format = -1; -+ fbi->state = C_DISABLE; -+ -+ return fbi; -+} -+ -+ -+void pxa_set_overlay_ctrlr_state(struct pxafb_info *fbi, u_int state) -+{ -+ switch (state) { -+ case C_DISABLE: -+ DISABLE_OVERLAYS(fbi); -+ break; -+ case C_ENABLE: -+ ENABLE_OVERLAYS(fbi); -+ break; -+ case C_BLANK: -+ BLANK_OVERLAYS(fbi); -+ break; -+ case C_UNBLANK: -+ UNBLANK_OVERLAYS(fbi); -+ break; -+ default: -+ break; -+ } -+} -+ -+static int is_pxafb_device(struct device * dev, void * data) -+{ -+ struct platform_device *pdev = container_of(dev, struct platform_device, dev); -+ -+ return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0); -+} -+ -+static int __devinit pxafb_overlay_init(void) -+{ -+ int ret; -+ struct overlayfb_info *overlay1fb, *overlay2fb, *cursorfb; -+ struct pxafb_info *fbi; -+ struct device *dev; -+ -+ ret = -1; -+ overlay1fb = overlay2fb = cursorfb = NULL; -+ fbi = NULL; -+ -+ dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); -+ if (!dev) { -+ printk(KERN_INFO "Base framebuffer not exists, failed to load overlay driver!\n"); -+ return ret; -+ } -+ -+ fbi = dev_get_drvdata(dev); -+ if (fbi == NULL) { -+ printk(KERN_INFO "Base framebuffer not initialized, failed to load overlay driver!\n"); -+ return ret; -+ } -+ -+ /* Overlay 1 windows */ -+ overlay1fb = overlay1fb_init_fbinfo(); -+ -+ if (!overlay1fb) { -+ ret = -ENOMEM; -+ printk("overlay1fb_init_fbinfo failed\n"); -+ goto failed; -+ } -+ -+ ret = register_framebuffer(&overlay1fb->fb); -+ if (ret < 0) -+ goto failed; -+ -+ /* Overlay 2 window */ -+ overlay2fb = overlay2fb_init_fbinfo(); -+ -+ if (!overlay2fb) { -+ ret = -ENOMEM; -+ printk("overlay2fb_init_fbinfo failed\n"); -+ goto failed; -+ } -+ -+ ret = register_framebuffer(&overlay2fb->fb); -+ if (ret < 0) goto failed; -+ -+ /* Hardware cursor window */ -+ cursorfb = cursorfb_init_fbinfo(); -+ -+ if (!cursorfb) { -+ ret = -ENOMEM; -+ printk("cursorfb_init_fbinfo failed\n"); -+ goto failed; -+ } -+ -+ ret = register_framebuffer(&cursorfb->fb); -+ if (ret < 0) goto failed; -+ -+ -+ /* set refernce to Overlays */ -+ fbi->overlay1fb = overlay1fb; -+ fbi->overlay2fb = overlay2fb; -+ fbi->cursorfb = cursorfb; -+ fbi->set_overlay_ctrlr_state=pxa_set_overlay_ctrlr_state; -+ -+ /* set refernce to BaseFrame */ -+ overlay1fb->basefb = fbi; -+ overlay2fb->basefb = fbi; -+ cursorfb->basefb = fbi; -+ -+ printk(KERN_INFO "Load PXA Overlay driver successfully!\n"); -+ -+ return 0; -+ -+failed: -+ if (overlay1fb) -+ kfree(overlay1fb); -+ if (overlay2fb) -+ kfree(overlay2fb); -+ if (cursorfb) -+ kfree(cursorfb); -+ printk(KERN_INFO "Load PXA Overlay driver failed!\n"); -+ return ret; -+} -+ -+static void __exit pxafb_overlay_exit(void) -+{ -+ struct pxafb_info *fbi; -+ struct device *dev; -+ -+ dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); -+ if (!dev) -+ return; -+ -+ fbi = dev_get_drvdata(dev); -+ if (!fbi) -+ return; -+ -+ if (fbi->overlay1fb) { -+ unregister_framebuffer(&(fbi->overlay1fb->fb)); -+ kfree(fbi->overlay1fb); -+ fbi->overlay1fb = NULL; -+ } -+ -+ if (fbi->overlay2fb) { -+ unregister_framebuffer(&(fbi->overlay2fb->fb)); -+ kfree(fbi->overlay2fb); -+ fbi->overlay2fb = NULL; -+ } -+ -+ if (fbi->cursorfb) { -+ unregister_framebuffer(&(fbi->cursorfb->fb)); -+ kfree(fbi->cursorfb); -+ fbi->cursorfb = NULL; -+ } -+ -+ fbi->set_overlay_ctrlr_state = NULL; -+ -+ printk(KERN_INFO "Unload PXA Overlay driver successfully!\n"); -+ return; -+} -+ -+ -+module_init(pxafb_overlay_init); -+module_exit(pxafb_overlay_exit); -+ -+MODULE_DESCRIPTION("Loadable framebuffer overlay driver for PXA"); -+MODULE_LICENSE("GPL"); -+ ---- linux-2.6.24-rc1.orig/include/asm-arm/arch-pxa/pxa-regs.h -+++ linux-2.6.24-rc1/include/asm-arm/arch-pxa/pxa-regs.h -@@ -789,11 +789,18 @@ - #define UDC_INT_PACKETCMP (0x1) - - #define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -+/* Older defines, do not use. */ - #define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ - #define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ - #define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ - #define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ - #define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ -+/* New defines. */ -+#define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */ -+#define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */ -+#define UDCISR1_IRRU (1 << 29) /* IntEn - Resume */ -+#define UDCISR1_IRSU (1 << 28) /* IntEn - Suspend */ -+#define UDCISR1_IRRS (1 << 27) /* IntEn - Reset */ - - #define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ - #define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ -@@ -1827,6 +1834,8 @@ - #define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ - #define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ - #define LCSR __REG(0x44000038) /* LCD Controller Status Register */ -+#define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */ -+#define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */ - #define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ - #define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ - #define TMEDCR __REG(0x44000044) /* TMED Control Register */ -@@ -1836,6 +1845,10 @@ - #define LCCR3_4BPP (2 << 24) - #define LCCR3_8BPP (3 << 24) - #define LCCR3_16BPP (4 << 24) -+#define LCCR3_18BPP (6 << 24) -+#define LCCR3_19BPP (8 << 24) -+#define LCCR3_24BPP (9 << 24) -+#define LCCR3_25BPP (10<< 24) - - #define LCCR3_PDFOR_0 (0 << 30) - #define LCCR3_PDFOR_1 (1 << 30) -@@ -2010,6 +2023,104 @@ - - #define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ - -+/* Overlay1 & Overlay2 & Hardware Cursor */ -+#define LCSR1_SOF1 (1 << 0) -+#define LCSR1_SOF2 (1 << 1) -+#define LCSR1_SOF3 (1 << 2) -+#define LCSR1_SOF4 (1 << 3) -+#define LCSR1_SOF5 (1 << 4) -+#define LCSR1_SOF6 (1 << 5) -+ -+#define LCSR1_EOF1 (1 << 8) -+#define LCSR1_EOF2 (1 << 9) -+#define LCSR1_EOF3 (1 << 10) -+#define LCSR1_EOF4 (1 << 11) -+#define LCSR1_EOF5 (1 << 12) -+#define LCSR1_EOF6 (1 << 13) -+ -+#define LCSR1_BS1 (1 << 16) -+#define LCSR1_BS2 (1 << 17) -+#define LCSR1_BS3 (1 << 18) -+#define LCSR1_BS4 (1 << 19) -+#define LCSR1_BS5 (1 << 20) -+#define LCSR1_BS6 (1 << 21) -+ -+#define LCSR1_IU2 (1 << 25) -+#define LCSR1_IU3 (1 << 26) -+#define LCSR1_IU4 (1 << 27) -+#define LCSR1_IU5 (1 << 28) -+#define LCSR1_IU6 (1 << 29) -+ -+#define LDCMD_SOFINT (1 << 22) -+#define LDCMD_EOFINT (1 << 21) -+ -+ -+#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ -+#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ -+#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ -+#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ -+#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ -+#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ -+ -+#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ -+#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ -+#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ -+#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ -+#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ -+#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ -+ -+#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ -+#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ -+#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ -+#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ -+#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ -+#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ -+ -+#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ -+#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ -+#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ -+#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ -+#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ -+#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ -+ -+#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ -+#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ -+#define CCR_CEN (1<<31) /* Enable bit for Cursor */ -+ -+/* LCD registers */ -+#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ -+#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ -+#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ -+#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ -+#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ -+#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ -+#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ -+#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ -+#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ -+#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ -+#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ -+#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ -+#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ -+#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ -+#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ -+#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ -+#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ -+#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ -+#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ -+#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ -+#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ -+#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ -+#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ -+ -+#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ -+#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ -+#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ -+#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ -+#define CCR __REG(0x44000090) /* Cursor Control Register */ -+ -+#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ -+#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ -+ - /* - * Memory controller - */ diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa_fb_overlay.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa_fb_overlay.patch deleted file mode 100644 index 49c59b3275..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/pxa_fb_overlay.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- - drivers/video/pxafb.h | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -Index: linux-2.6.22/drivers/video/pxafb.h -=================================================================== ---- linux-2.6.22.orig/drivers/video/pxafb.h 2007-09-25 15:44:42.000000000 +0200 -+++ linux-2.6.22/drivers/video/pxafb.h 2007-09-25 15:45:07.000000000 +0200 -@@ -36,7 +36,7 @@ - struct fb_bitfield transp; - }; - --#ifdef CONFIG_PXA27x -+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - /* PXA Overlay Framebuffer Support */ - struct overlayfb_info - { -@@ -142,7 +142,7 @@ - wait_queue_head_t ctrlr_wait; - struct work_struct task; - --#ifdef CONFIG_PXA27x -+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - /* PXA Overlay Framebuffer Support */ - struct overlayfb_info *overlay1fb; - struct overlayfb_info *overlay2fb; diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch deleted file mode 100644 index b513ba1466..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch +++ /dev/null @@ -1,155 +0,0 @@ - -From: Petr Vandrovec - -Patch below adds support for using different prescaler than 16 for 16c950 -chips. This is needed for using Fujitsu-Siemens Connect2Air compact-flash -card, which comes (apparently) with 806kHz clocks, and so you have to -program prescaler for division by 7, and DLAB to 1, to get 115200Bd. - -To get card properly running you also have to add lines below to -/etc/pcmcia/serial.opts so kernel knows that base speed is not 115200 but -50400 (50400 * 16 = 806400; 806400 / 7 = 115200). As I've found no code -specifying baud_rate in serial_cs, I assume that specifying it in -serial.opts is right way to do this type of things. - -Patch also fixes problem that for UPF_MAGIC_MULTIPLIER maximum possible -baud rate passed to uart code was uartclk / 16 while correct value for -these devices (and for 16c950) is uartclk / 4. - -Patch also fixes problem that for UPF_MAGIC_MULTIPLIER devices with -baud_rate 19200 or 9600 spd_cust did not work correctly. Not that such -devices exist, but we should not ignore spd_cust, user probably knows why -he asked for spd_cust. - -serial.opts: - -case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in -'0279,950b-2-GPRS Modem---') - SERIAL_OPTS="baud_base 50400" - ;; -esac - -Cc: David Woodhouse -Signed-off-by: Andrew Morton ---- - - drivers/serial/8250.c | 82 +++++++++++++++++++++++++++++++++++++++----------- - 1 file changed, 64 insertions(+), 18 deletions(-) - -Index: linux-2.6.21/drivers/serial/8250.c -=================================================================== ---- linux-2.6.21.orig/drivers/serial/8250.c 2007-07-01 16:59:52.000000000 +0100 -+++ linux-2.6.21/drivers/serial/8250.c 2007-07-01 17:01:21.000000000 +0100 -@@ -1964,24 +1964,58 @@ static void serial8250_shutdown(struct u - serial_unlink_irq_chain(up); - } - --static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) -+static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud, -+ unsigned int *prescaler) - { -- unsigned int quot; -- -- /* -- * Handle magic divisors for baud rates above baud_base on -- * SMSC SuperIO chips. -+ /* -+ * Use special handling only if user did not supply its own divider. -+ * spd_cust is defined in terms of baud_base, so always use default -+ * prescaler when spd_cust is requested. - */ -- if ((port->flags & UPF_MAGIC_MULTIPLIER) && -- baud == (port->uartclk/4)) -- quot = 0x8001; -- else if ((port->flags & UPF_MAGIC_MULTIPLIER) && -- baud == (port->uartclk/8)) -- quot = 0x8002; -- else -- quot = uart_get_divisor(port, baud); - -- return quot; -+ *prescaler = 16; -+ if (baud != 38400 || (port->flags & UPF_SPD_MASK) != UPF_SPD_CUST) { -+ unsigned int quot = port->uartclk / baud; -+ -+ /* -+ * Handle magic divisors for baud rates above baud_base on -+ * SMSC SuperIO chips. -+ */ -+ if (port->flags & UPF_MAGIC_MULTIPLIER) { -+ if (quot == 4) { -+ return 0x8001; -+ } else if (quot == 8) { -+ return 0x8002; -+ } -+ } -+ if (port->type == PORT_16C950) { -+ /* -+ * This computes TCR value (4 to 16), not CPR value (which can -+ * be between 1.000 and 31.875) - chip I have uses XTAL of -+ * 806400Hz, and so a division by 7 is required to get 115200Bd. -+ * I'm leaving CPR disabled for now, until someone will -+ * hit even more exotic XTAL (it is needed to get 500kbps -+ * or 1000kbps from 18.432MHz XTAL, but I have no device -+ * which would benefit from doing that). -+ * -+ * If we can use divide by 16, use it. Otherwise look for -+ * better prescaler, from 15 to 4. If quotient cannot -+ * be divided by any integer value between 4 and 15, use 4. -+ */ -+ if (quot & 0x0F) { -+ unsigned int div; -+ -+ for (div = 15; div > 4; div--) { -+ if (quot % div == 0) { -+ break; -+ } -+ } -+ *prescaler = div; -+ return quot / div; -+ } -+ } -+ } -+ return uart_get_divisor(port, baud); - } - - static void -@@ -1991,7 +2025,7 @@ serial8250_set_termios(struct uart_port - struct uart_8250_port *up = (struct uart_8250_port *)port; - unsigned char cval, fcr = 0; - unsigned long flags; -- unsigned int baud, quot; -+ unsigned int baud, quot, prescaler; - - switch (termios->c_cflag & CSIZE) { - case CS5: -@@ -2023,8 +2057,13 @@ serial8250_set_termios(struct uart_port - /* - * Ask the core to calculate the divisor for us. - */ -- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); -- quot = serial8250_get_divisor(port, baud); -+ if (port->type == PORT_16C950 || (port->flags & UPF_MAGIC_MULTIPLIER)) { -+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); -+ } else { -+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); -+ } -+ quot = serial8250_get_divisor(port, baud, &prescaler); -+ - - /* - * Oxford Semi 952 rev B workaround -@@ -2139,6 +2178,13 @@ serial8250_set_termios(struct uart_port - serial_dl_write(up, quot); - - /* -+ * Program prescaler for 16C950 chips. -+ */ -+ if (up->port.type == PORT_16C950) { -+ serial_icr_write(up, UART_TCR, prescaler == 16 ? 0 : prescaler); -+ } -+ -+ /* - * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR - * is written without DLAB set, this mode will be disabled. - */ diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/squashfs3.0-2.6.15.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/squashfs3.0-2.6.15.patch deleted file mode 100644 index a210afcaf8..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/squashfs3.0-2.6.15.patch +++ /dev/null @@ -1,4189 +0,0 @@ - fs/Kconfig | 65 + - fs/Makefile | 1 - fs/squashfs/Makefile | 7 - fs/squashfs/inode.c | 2122 +++++++++++++++++++++++++++++++++++++++++ - fs/squashfs/squashfs.h | 86 + - fs/squashfs/squashfs2_0.c | 757 ++++++++++++++ - include/linux/squashfs_fs.h | 911 +++++++++++++++++ - include/linux/squashfs_fs_i.h | 45 - include/linux/squashfs_fs_sb.h | 74 + - init/do_mounts_rd.c | 13 - 10 files changed, 4081 insertions(+) - -Index: linux-2.6.22/fs/Kconfig -=================================================================== ---- linux-2.6.22.orig/fs/Kconfig 2007-08-28 21:56:32.000000000 +0100 -+++ linux-2.6.22/fs/Kconfig 2007-08-28 21:56:34.000000000 +0100 -@@ -1394,6 +1394,71 @@ config CRAMFS - - If unsure, say N. - -+config SQUASHFS -+ tristate "SquashFS 3.0 - Squashed file system support" -+ select ZLIB_INFLATE -+ help -+ Saying Y here includes support for SquashFS 3.0 (a Compressed Read-Only File -+ System). Squashfs is a highly compressed read-only filesystem for Linux. -+ It uses zlib compression to compress both files, inodes and directories. -+ Inodes in the system are very small and all blocks are packed to minimise -+ data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. -+ SquashFS 3.0 supports 64 bit filesystems and files (larger than 4GB), full -+ uid/gid information, hard links and timestamps. -+ -+ Squashfs is intended for general read-only filesystem use, for archival -+ use (i.e. in cases where a .tar.gz file may be used), and in embedded -+ systems where low overhead is needed. Further information and filesystem tools -+ are available from http://squashfs.sourceforge.net. -+ -+ If you want to compile this as a module ( = code which can be -+ inserted in and removed from the running kernel whenever you want), -+ say M here and read . The module -+ will be called squashfs. Note that the root file system (the one -+ containing the directory /) cannot be compiled as a module. -+ -+ If unsure, say N. -+ -+config SQUASHFS_EMBEDDED -+ -+ bool "Additional options for memory-constrained systems" -+ depends on SQUASHFS -+ default n -+ help -+ Saying Y here allows you to specify cache sizes and how Squashfs -+ allocates memory. This is only intended for memory constrained -+ systems. -+ -+ If unsure, say N. -+ -+config SQUASHFS_FRAGMENT_CACHE_SIZE -+ int "Number of fragments cached" if SQUASHFS_EMBEDDED -+ depends on SQUASHFS -+ default "3" -+ help -+ By default SquashFS caches the last 3 fragments read from -+ the filesystem. Increasing this amount may mean SquashFS -+ has to re-read fragments less often from disk, at the expense -+ of extra system memory. Decreasing this amount will mean -+ SquashFS uses less memory at the expense of extra reads from disk. -+ -+ Note there must be at least one cached fragment. Anything -+ much more than three will probably not make much difference. -+ -+config SQUASHFS_VMALLOC -+ bool "Use Vmalloc rather than Kmalloc" if SQUASHFS_EMBEDDED -+ depends on SQUASHFS -+ default n -+ help -+ By default SquashFS uses kmalloc to obtain fragment cache memory. -+ Kmalloc memory is the standard kernel allocator, but it can fail -+ on memory constrained systems. Because of the way Vmalloc works, -+ Vmalloc can succeed when kmalloc fails. Specifying this option -+ will make SquashFS always use Vmalloc to allocate the -+ fragment cache memory. -+ -+ If unsure, say N. -+ - config VXFS_FS - tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" - depends on BLOCK -Index: linux-2.6.22/fs/Makefile -=================================================================== ---- linux-2.6.22.orig/fs/Makefile 2007-08-28 21:54:14.000000000 +0100 -+++ linux-2.6.22/fs/Makefile 2007-08-28 21:56:34.000000000 +0100 -@@ -72,6 +72,7 @@ obj-$(CONFIG_JBD) += jbd/ - obj-$(CONFIG_JBD2) += jbd2/ - obj-$(CONFIG_EXT2_FS) += ext2/ - obj-$(CONFIG_CRAMFS) += cramfs/ -+obj-$(CONFIG_SQUASHFS) += squashfs/ - obj-$(CONFIG_RAMFS) += ramfs/ - obj-$(CONFIG_HUGETLBFS) += hugetlbfs/ - obj-$(CONFIG_CODA_FS) += coda/ -Index: linux-2.6.22/fs/squashfs/inode.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/fs/squashfs/inode.c 2007-08-28 22:12:03.000000000 +0100 -@@ -0,0 +1,2122 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * inode.c -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "squashfs.h" -+ -+static void squashfs_put_super(struct super_block *); -+static int squashfs_statfs(struct dentry *, struct kstatfs *); -+static int squashfs_symlink_readpage(struct file *file, struct page *page); -+static int squashfs_readpage(struct file *file, struct page *page); -+static int squashfs_readpage4K(struct file *file, struct page *page); -+static int squashfs_readdir(struct file *, void *, filldir_t); -+static struct inode *squashfs_alloc_inode(struct super_block *sb); -+static void squashfs_destroy_inode(struct inode *inode); -+static int init_inodecache(void); -+static void destroy_inodecache(void); -+static struct dentry *squashfs_lookup(struct inode *, struct dentry *, -+ struct nameidata *); -+static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode); -+static long long read_blocklist(struct inode *inode, int index, -+ int readahead_blks, char *block_list, -+ unsigned short **block_p, unsigned int *bsize); -+static int squashfs_get_sb(struct file_system_type *, int, -+ const char *, void *, struct vfsmount *); -+ -+ -+static z_stream stream; -+ -+static struct file_system_type squashfs_fs_type = { -+ .owner = THIS_MODULE, -+ .name = "squashfs", -+ .get_sb = squashfs_get_sb, -+ .kill_sb = kill_block_super, -+ .fs_flags = FS_REQUIRES_DEV -+}; -+ -+static unsigned char squashfs_filetype_table[] = { -+ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK -+}; -+ -+static struct super_operations squashfs_ops = { -+ .alloc_inode = squashfs_alloc_inode, -+ .destroy_inode = squashfs_destroy_inode, -+ .statfs = squashfs_statfs, -+ .put_super = squashfs_put_super, -+}; -+ -+SQSH_EXTERN struct address_space_operations squashfs_symlink_aops = { -+ .readpage = squashfs_symlink_readpage -+}; -+ -+SQSH_EXTERN struct address_space_operations squashfs_aops = { -+ .readpage = squashfs_readpage -+}; -+ -+SQSH_EXTERN struct address_space_operations squashfs_aops_4K = { -+ .readpage = squashfs_readpage4K -+}; -+ -+static struct file_operations squashfs_dir_ops = { -+ .read = generic_read_dir, -+ .readdir = squashfs_readdir -+}; -+ -+SQSH_EXTERN struct inode_operations squashfs_dir_inode_ops = { -+ .lookup = squashfs_lookup -+}; -+ -+ -+static struct buffer_head *get_block_length(struct super_block *s, -+ int *cur_index, int *offset, int *c_byte) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ unsigned short temp; -+ struct buffer_head *bh; -+ -+ if (!(bh = sb_bread(s, *cur_index))) -+ goto out; -+ -+ if (msblk->devblksize - *offset == 1) { -+ if (msblk->swap) -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ else -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ brelse(bh); -+ if (!(bh = sb_bread(s, ++(*cur_index)))) -+ goto out; -+ if (msblk->swap) -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ bh->b_data); -+ else -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ bh->b_data); -+ *c_byte = temp; -+ *offset = 1; -+ } else { -+ if (msblk->swap) { -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset + 1)); -+ } else { -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset + 1)); -+ } -+ *c_byte = temp; -+ *offset += 2; -+ } -+ -+ if (SQUASHFS_CHECK_DATA(msblk->sblk.flags)) { -+ if (*offset == msblk->devblksize) { -+ brelse(bh); -+ if (!(bh = sb_bread(s, ++(*cur_index)))) -+ goto out; -+ *offset = 0; -+ } -+ if (*((unsigned char *) (bh->b_data + *offset)) != -+ SQUASHFS_MARKER_BYTE) { -+ ERROR("Metadata block marker corrupt @ %x\n", -+ *cur_index); -+ brelse(bh); -+ goto out; -+ } -+ (*offset)++; -+ } -+ return bh; -+ -+out: -+ return NULL; -+} -+ -+ -+SQSH_EXTERN unsigned int squashfs_read_data(struct super_block *s, char *buffer, -+ long long index, unsigned int length, -+ long long *next_index) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct buffer_head *bh[((SQUASHFS_FILE_MAX_SIZE - 1) >> -+ msblk->devblksize_log2) + 2]; -+ unsigned int offset = index & ((1 << msblk->devblksize_log2) - 1); -+ unsigned int cur_index = index >> msblk->devblksize_log2; -+ int bytes, avail_bytes, b = 0, k; -+ char *c_buffer; -+ unsigned int compressed; -+ unsigned int c_byte = length; -+ -+ if (c_byte) { -+ bytes = msblk->devblksize - offset; -+ compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte); -+ c_buffer = compressed ? msblk->read_data : buffer; -+ c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte); -+ -+ TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed -+ ? "" : "un", (unsigned int) c_byte); -+ -+ if (!(bh[0] = sb_getblk(s, cur_index))) -+ goto block_release; -+ -+ for (b = 1; bytes < c_byte; b++) { -+ if (!(bh[b] = sb_getblk(s, ++cur_index))) -+ goto block_release; -+ bytes += msblk->devblksize; -+ } -+ ll_rw_block(READ, b, bh); -+ } else { -+ if (!(bh[0] = get_block_length(s, &cur_index, &offset, -+ &c_byte))) -+ goto read_failure; -+ -+ bytes = msblk->devblksize - offset; -+ compressed = SQUASHFS_COMPRESSED(c_byte); -+ c_buffer = compressed ? msblk->read_data : buffer; -+ c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte); -+ -+ TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed -+ ? "" : "un", (unsigned int) c_byte); -+ -+ for (b = 1; bytes < c_byte; b++) { -+ if (!(bh[b] = sb_getblk(s, ++cur_index))) -+ goto block_release; -+ bytes += msblk->devblksize; -+ } -+ ll_rw_block(READ, b - 1, bh + 1); -+ } -+ -+ if (compressed) -+ down(&msblk->read_data_mutex); -+ -+ for (bytes = 0, k = 0; k < b; k++) { -+ avail_bytes = (c_byte - bytes) > (msblk->devblksize - offset) ? -+ msblk->devblksize - offset : -+ c_byte - bytes; -+ wait_on_buffer(bh[k]); -+ if (!buffer_uptodate(bh[k])) -+ goto block_release; -+ memcpy(c_buffer + bytes, bh[k]->b_data + offset, avail_bytes); -+ bytes += avail_bytes; -+ offset = 0; -+ brelse(bh[k]); -+ } -+ -+ /* -+ * uncompress block -+ */ -+ if (compressed) { -+ int zlib_err; -+ -+ stream.next_in = c_buffer; -+ stream.avail_in = c_byte; -+ stream.next_out = buffer; -+ stream.avail_out = msblk->read_size; -+ -+ if (((zlib_err = zlib_inflateInit(&stream)) != Z_OK) || -+ ((zlib_err = zlib_inflate(&stream, Z_FINISH)) -+ != Z_STREAM_END) || ((zlib_err = -+ zlib_inflateEnd(&stream)) != Z_OK)) { -+ ERROR("zlib_fs returned unexpected result 0x%x\n", -+ zlib_err); -+ bytes = 0; -+ } else -+ bytes = stream.total_out; -+ -+ up(&msblk->read_data_mutex); -+ } -+ -+ if (next_index) -+ *next_index = index + c_byte + (length ? 0 : -+ (SQUASHFS_CHECK_DATA(msblk->sblk.flags) -+ ? 3 : 2)); -+ return bytes; -+ -+block_release: -+ while (--b >= 0) -+ brelse(bh[b]); -+ -+read_failure: -+ ERROR("sb_bread failed reading block 0x%x\n", cur_index); -+ return 0; -+} -+ -+ -+SQSH_EXTERN int squashfs_get_cached_block(struct super_block *s, char *buffer, -+ long long block, unsigned int offset, -+ int length, long long *next_block, -+ unsigned int *next_offset) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ int n, i, bytes, return_length = length; -+ long long next_index; -+ -+ TRACE("Entered squashfs_get_cached_block [%llx:%x]\n", block, offset); -+ -+ while ( 1 ) { -+ for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) -+ if (msblk->block_cache[i].block == block) -+ break; -+ -+ down(&msblk->block_cache_mutex); -+ -+ if (i == SQUASHFS_CACHED_BLKS) { -+ /* read inode header block */ -+ for (i = msblk->next_cache, n = SQUASHFS_CACHED_BLKS; -+ n ; n --, i = (i + 1) % -+ SQUASHFS_CACHED_BLKS) -+ if (msblk->block_cache[i].block != -+ SQUASHFS_USED_BLK) -+ break; -+ -+ if (n == 0) { -+ wait_queue_t wait; -+ -+ init_waitqueue_entry(&wait, current); -+ add_wait_queue(&msblk->waitq, &wait); -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ up(&msblk->block_cache_mutex); -+ schedule(); -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&msblk->waitq, &wait); -+ continue; -+ } -+ msblk->next_cache = (i + 1) % SQUASHFS_CACHED_BLKS; -+ -+ if (msblk->block_cache[i].block == -+ SQUASHFS_INVALID_BLK) { -+ if (!(msblk->block_cache[i].data = -+ kmalloc(SQUASHFS_METADATA_SIZE, -+ GFP_KERNEL))) { -+ ERROR("Failed to allocate cache" -+ "block\n"); -+ up(&msblk->block_cache_mutex); -+ goto out; -+ } -+ } -+ -+ msblk->block_cache[i].block = SQUASHFS_USED_BLK; -+ up(&msblk->block_cache_mutex); -+ -+ if (!(msblk->block_cache[i].length = -+ squashfs_read_data(s, -+ msblk->block_cache[i].data, -+ block, 0, &next_index))) { -+ ERROR("Unable to read cache block [%llx:%x]\n", -+ block, offset); -+ goto out; -+ } -+ -+ down(&msblk->block_cache_mutex); -+ wake_up(&msblk->waitq); -+ msblk->block_cache[i].block = block; -+ msblk->block_cache[i].next_index = next_index; -+ TRACE("Read cache block [%llx:%x]\n", block, offset); -+ } -+ -+ if (msblk->block_cache[i].block != block) { -+ up(&msblk->block_cache_mutex); -+ continue; -+ } -+ -+ if ((bytes = msblk->block_cache[i].length - offset) >= length) { -+ if (buffer) -+ memcpy(buffer, msblk->block_cache[i].data + -+ offset, length); -+ if (msblk->block_cache[i].length - offset == length) { -+ *next_block = msblk->block_cache[i].next_index; -+ *next_offset = 0; -+ } else { -+ *next_block = block; -+ *next_offset = offset + length; -+ } -+ up(&msblk->block_cache_mutex); -+ goto finish; -+ } else { -+ if (buffer) { -+ memcpy(buffer, msblk->block_cache[i].data + -+ offset, bytes); -+ buffer += bytes; -+ } -+ block = msblk->block_cache[i].next_index; -+ up(&msblk->block_cache_mutex); -+ length -= bytes; -+ offset = 0; -+ } -+ } -+ -+finish: -+ return return_length; -+out: -+ return 0; -+} -+ -+ -+static int get_fragment_location(struct super_block *s, unsigned int fragment, -+ long long *fragment_start_block, -+ unsigned int *fragment_size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ long long start_block = -+ msblk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)]; -+ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment); -+ struct squashfs_fragment_entry fragment_entry; -+ -+ if (msblk->swap) { -+ struct squashfs_fragment_entry sfragment_entry; -+ -+ if (!squashfs_get_cached_block(s, (char *) &sfragment_entry, -+ start_block, offset, -+ sizeof(sfragment_entry), &start_block, -+ &offset)) -+ goto out; -+ SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) &fragment_entry, -+ start_block, offset, -+ sizeof(fragment_entry), &start_block, -+ &offset)) -+ goto out; -+ -+ *fragment_start_block = fragment_entry.start_block; -+ *fragment_size = fragment_entry.size; -+ -+ return 1; -+ -+out: -+ return 0; -+} -+ -+ -+SQSH_EXTERN void release_cached_fragment(struct squashfs_sb_info *msblk, struct -+ squashfs_fragment_cache *fragment) -+{ -+ down(&msblk->fragment_mutex); -+ fragment->locked --; -+ wake_up(&msblk->fragment_wait_queue); -+ up(&msblk->fragment_mutex); -+} -+ -+ -+SQSH_EXTERN struct squashfs_fragment_cache *get_cached_fragment(struct super_block -+ *s, long long start_block, -+ int length) -+{ -+ int i, n, nf; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ -+ while ( 1 ) { -+ down(&msblk->fragment_mutex); -+ -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS && -+ msblk->fragment[i].block != start_block; i++); -+ -+ if (i == SQUASHFS_CACHED_FRAGMENTS) { -+ nf = (msblk->next_fragment + 1) % -+ SQUASHFS_CACHED_FRAGMENTS; -+ for (i = msblk->next_fragment, n = -+ SQUASHFS_CACHED_FRAGMENTS; n && -+ msblk->fragment[i].locked; n--, i = (i + 1) % -+ SQUASHFS_CACHED_FRAGMENTS); -+ -+ if (n == 0) { -+ wait_queue_t wait; -+ -+ init_waitqueue_entry(&wait, current); -+ add_wait_queue(&msblk->fragment_wait_queue, -+ &wait); -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ up(&msblk->fragment_mutex); -+ schedule(); -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&msblk->fragment_wait_queue, -+ &wait); -+ continue; -+ } -+ msblk->next_fragment = nf; -+ -+ if (msblk->fragment[i].data == NULL) -+ if (!(msblk->fragment[i].data = SQUASHFS_ALLOC -+ (SQUASHFS_FILE_MAX_SIZE))) { -+ ERROR("Failed to allocate fragment " -+ "cache block\n"); -+ up(&msblk->fragment_mutex); -+ goto out; -+ } -+ -+ msblk->fragment[i].block = SQUASHFS_INVALID_BLK; -+ msblk->fragment[i].locked = 1; -+ up(&msblk->fragment_mutex); -+ -+ if (!(msblk->fragment[i].length = squashfs_read_data(s, -+ msblk->fragment[i].data, -+ start_block, length, NULL))) { -+ ERROR("Unable to read fragment cache block " -+ "[%llx]\n", start_block); -+ msblk->fragment[i].locked = 0; -+ goto out; -+ } -+ -+ msblk->fragment[i].block = start_block; -+ TRACE("New fragment %d, start block %lld, locked %d\n", -+ i, msblk->fragment[i].block, -+ msblk->fragment[i].locked); -+ break; -+ } -+ -+ msblk->fragment[i].locked++; -+ up(&msblk->fragment_mutex); -+ TRACE("Got fragment %d, start block %lld, locked %d\n", i, -+ msblk->fragment[i].block, -+ msblk->fragment[i].locked); -+ break; -+ } -+ -+ return &msblk->fragment[i]; -+ -+out: -+ return NULL; -+} -+ -+ -+static struct inode *squashfs_new_inode(struct super_block *s, -+ struct squashfs_base_inode_header *inodeb) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct inode *i = new_inode(s); -+ -+ if (i) { -+ i->i_ino = inodeb->inode_number; -+ i->i_mtime.tv_sec = inodeb->mtime; -+ i->i_atime.tv_sec = inodeb->mtime; -+ i->i_ctime.tv_sec = inodeb->mtime; -+ i->i_uid = msblk->uid[inodeb->uid]; -+ i->i_mode = inodeb->mode; -+ i->i_size = 0; -+ if (inodeb->guid == SQUASHFS_GUIDS) -+ i->i_gid = i->i_uid; -+ else -+ i->i_gid = msblk->guid[inodeb->guid]; -+ } -+ -+ return i; -+} -+ -+ -+static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode) -+{ -+ struct inode *i; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long block = SQUASHFS_INODE_BLK(inode) + -+ sblk->inode_table_start; -+ unsigned int offset = SQUASHFS_INODE_OFFSET(inode); -+ long long next_block; -+ unsigned int next_offset; -+ union squashfs_inode_header id, sid; -+ struct squashfs_base_inode_header *inodeb = &id.base, -+ *sinodeb = &sid.base; -+ -+ TRACE("Entered squashfs_iget\n"); -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) sinodeb, block, -+ offset, sizeof(*sinodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_BASE_INODE_HEADER(inodeb, sinodeb, -+ sizeof(*sinodeb)); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) inodeb, block, -+ offset, sizeof(*inodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ switch(inodeb->inode_type) { -+ case SQUASHFS_FILE_TYPE: { -+ unsigned int frag_size; -+ long long frag_blk; -+ struct squashfs_reg_inode_header *inodep = &id.reg; -+ struct squashfs_reg_inode_header *sinodep = &sid.reg; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_REG_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG && -+ !get_fragment_location(s, -+ inodep->fragment, &frag_blk, &frag_size)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = 1; -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ if (sblk->block_size > 4096) -+ i->i_data.a_ops = &squashfs_aops; -+ else -+ i->i_data.a_ops = &squashfs_aops_4K; -+ -+ TRACE("File inode %x:%x, start_block %llx, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_LREG_TYPE: { -+ unsigned int frag_size; -+ long long frag_blk; -+ struct squashfs_lreg_inode_header *inodep = &id.lreg; -+ struct squashfs_lreg_inode_header *sinodep = &sid.lreg; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LREG_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG && -+ !get_fragment_location(s, -+ inodep->fragment, &frag_blk, &frag_size)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ if (sblk->block_size > 4096) -+ i->i_data.a_ops = &squashfs_aops; -+ else -+ i->i_data.a_ops = &squashfs_aops_4K; -+ -+ TRACE("File inode %x:%x, start_block %llx, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_DIR_TYPE: { -+ struct squashfs_dir_inode_header *inodep = &id.dir; -+ struct squashfs_dir_inode_header *sinodep = &sid.dir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DIR_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops; -+ i->i_fop = &squashfs_dir_ops; -+ i->i_mode |= S_IFDIR; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = 0; -+ SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode; -+ -+ TRACE("Directory inode %x:%x, start_block %x, offset " -+ "%x\n", SQUASHFS_INODE_BLK(inode), -+ offset, inodep->start_block, -+ inodep->offset); -+ break; -+ } -+ case SQUASHFS_LDIR_TYPE: { -+ struct squashfs_ldir_inode_header *inodep = &id.ldir; -+ struct squashfs_ldir_inode_header *sinodep = &sid.ldir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LDIR_INODE_HEADER(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops; -+ i->i_fop = &squashfs_dir_ops; -+ i->i_mode |= S_IFDIR; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_start = next_block; -+ SQUASHFS_I(i)->u.s2.directory_index_offset = -+ next_offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = -+ inodep->i_count; -+ SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode; -+ -+ TRACE("Long directory inode %x:%x, start_block %x, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, inodep->offset); -+ break; -+ } -+ case SQUASHFS_SYMLINK_TYPE: { -+ struct squashfs_symlink_inode_header *inodep = -+ &id.symlink; -+ struct squashfs_symlink_inode_header *sinodep = -+ &sid.symlink; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_SYMLINK_INODE_HEADER(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->symlink_size; -+ i->i_op = &page_symlink_inode_operations; -+ i->i_data.a_ops = &squashfs_symlink_aops; -+ i->i_mode |= S_IFLNK; -+ SQUASHFS_I(i)->start_block = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ -+ TRACE("Symbolic link inode %x:%x, start_block %llx, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ next_block, next_offset); -+ break; -+ } -+ case SQUASHFS_BLKDEV_TYPE: -+ case SQUASHFS_CHRDEV_TYPE: { -+ struct squashfs_dev_inode_header *inodep = &id.dev; -+ struct squashfs_dev_inode_header *sinodep = &sid.dev; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DEV_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if ((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_mode |= (inodeb->inode_type == -+ SQUASHFS_CHRDEV_TYPE) ? S_IFCHR : -+ S_IFBLK; -+ init_special_inode(i, i->i_mode, -+ old_decode_dev(inodep->rdev)); -+ -+ TRACE("Device inode %x:%x, rdev %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->rdev); -+ break; -+ } -+ case SQUASHFS_FIFO_TYPE: -+ case SQUASHFS_SOCKET_TYPE: { -+ struct squashfs_ipc_inode_header *inodep = &id.ipc; -+ struct squashfs_ipc_inode_header *sinodep = &sid.ipc; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_IPC_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if ((i = squashfs_new_inode(s, inodeb)) == NULL) -+ goto failed_read1; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE) -+ ? S_IFIFO : S_IFSOCK; -+ init_special_inode(i, i->i_mode, 0); -+ break; -+ } -+ default: -+ ERROR("Unknown inode type %d in squashfs_iget!\n", -+ inodeb->inode_type); -+ goto failed_read1; -+ } -+ -+ insert_inode_hash(i); -+ return i; -+ -+failed_read: -+ ERROR("Unable to read inode [%llx:%x]\n", block, offset); -+ -+failed_read1: -+ return NULL; -+} -+ -+ -+static int read_fragment_index_table(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ /* Allocate fragment index table */ -+ if (!(msblk->fragment_index = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES -+ (sblk->fragments), GFP_KERNEL))) { -+ ERROR("Failed to allocate uid/gid table\n"); -+ return 0; -+ } -+ -+ if (SQUASHFS_FRAGMENT_INDEX_BYTES(sblk->fragments) && -+ !squashfs_read_data(s, (char *) -+ msblk->fragment_index, -+ sblk->fragment_table_start, -+ SQUASHFS_FRAGMENT_INDEX_BYTES -+ (sblk->fragments) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) { -+ ERROR("unable to read fragment index table\n"); -+ return 0; -+ } -+ -+ if (msblk->swap) { -+ int i; -+ long long fragment; -+ -+ for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sblk->fragments); -+ i++) { -+ SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment), -+ &msblk->fragment_index[i], 1); -+ msblk->fragment_index[i] = fragment; -+ } -+ } -+ -+ return 1; -+} -+ -+ -+static int supported_squashfs_filesystem(struct squashfs_sb_info *msblk, int silent) -+{ -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ msblk->iget = squashfs_iget; -+ msblk->read_blocklist = read_blocklist; -+ msblk->read_fragment_index_table = read_fragment_index_table; -+ -+ if (sblk->s_major == 1) { -+ if (!squashfs_1_0_supported(msblk)) { -+ SERROR("Major/Minor mismatch, Squashfs 1.0 filesystems " -+ "are unsupported\n"); -+ SERROR("Please recompile with " -+ "Squashfs 1.0 support enabled\n"); -+ return 0; -+ } -+ } else if (sblk->s_major == 2) { -+ if (!squashfs_2_0_supported(msblk)) { -+ SERROR("Major/Minor mismatch, Squashfs 2.0 filesystems " -+ "are unsupported\n"); -+ SERROR("Please recompile with " -+ "Squashfs 2.0 support enabled\n"); -+ return 0; -+ } -+ } else if(sblk->s_major != SQUASHFS_MAJOR || sblk->s_minor > -+ SQUASHFS_MINOR) { -+ SERROR("Major/Minor mismatch, trying to mount newer %d.%d " -+ "filesystem\n", sblk->s_major, sblk->s_minor); -+ SERROR("Please update your kernel\n"); -+ return 0; -+ } -+ -+ return 1; -+} -+ -+ -+static int squashfs_fill_super(struct super_block *s, void *data, int silent) -+{ -+ struct squashfs_sb_info *msblk; -+ struct squashfs_super_block *sblk; -+ int i; -+ char b[BDEVNAME_SIZE]; -+ struct inode *root; -+ -+ TRACE("Entered squashfs_read_superblock\n"); -+ -+ if (!(s->s_fs_info = kmalloc(sizeof(struct squashfs_sb_info), -+ GFP_KERNEL))) { -+ ERROR("Failed to allocate superblock\n"); -+ goto failure; -+ } -+ memset(s->s_fs_info, 0, sizeof(struct squashfs_sb_info)); -+ msblk = s->s_fs_info; -+ sblk = &msblk->sblk; -+ -+ msblk->devblksize = sb_min_blocksize(s, BLOCK_SIZE); -+ msblk->devblksize_log2 = ffz(~msblk->devblksize); -+ -+ init_MUTEX(&msblk->read_data_mutex); -+ init_MUTEX(&msblk->read_page_mutex); -+ init_MUTEX(&msblk->block_cache_mutex); -+ init_MUTEX(&msblk->fragment_mutex); -+ init_MUTEX(&msblk->meta_index_mutex); -+ -+ init_waitqueue_head(&msblk->waitq); -+ init_waitqueue_head(&msblk->fragment_wait_queue); -+ -+ if (!squashfs_read_data(s, (char *) sblk, SQUASHFS_START, -+ sizeof(struct squashfs_super_block) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) { -+ SERROR("unable to read superblock\n"); -+ goto failed_mount; -+ } -+ -+ /* Check it is a SQUASHFS superblock */ -+ msblk->swap = 0; -+ if ((s->s_magic = sblk->s_magic) != SQUASHFS_MAGIC) { -+ if (sblk->s_magic == SQUASHFS_MAGIC_SWAP) { -+ struct squashfs_super_block ssblk; -+ -+ WARNING("Mounting a different endian SQUASHFS " -+ "filesystem on %s\n", bdevname(s->s_bdev, b)); -+ -+ SQUASHFS_SWAP_SUPER_BLOCK(&ssblk, sblk); -+ memcpy(sblk, &ssblk, sizeof(struct squashfs_super_block)); -+ msblk->swap = 1; -+ } else { -+ SERROR("Can't find a SQUASHFS superblock on %s\n", -+ bdevname(s->s_bdev, b)); -+ goto failed_mount; -+ } -+ } -+ -+ /* Check the MAJOR & MINOR versions */ -+ if(!supported_squashfs_filesystem(msblk, silent)) -+ goto failed_mount; -+ -+ TRACE("Found valid superblock on %s\n", bdevname(s->s_bdev, b)); -+ TRACE("Inodes are %scompressed\n", -+ SQUASHFS_UNCOMPRESSED_INODES -+ (sblk->flags) ? "un" : ""); -+ TRACE("Data is %scompressed\n", -+ SQUASHFS_UNCOMPRESSED_DATA(sblk->flags) -+ ? "un" : ""); -+ TRACE("Check data is %s present in the filesystem\n", -+ SQUASHFS_CHECK_DATA(sblk->flags) ? -+ "" : "not"); -+ TRACE("Filesystem size %lld bytes\n", sblk->bytes_used); -+ TRACE("Block size %d\n", sblk->block_size); -+ TRACE("Number of inodes %d\n", sblk->inodes); -+ if (sblk->s_major > 1) -+ TRACE("Number of fragments %d\n", sblk->fragments); -+ TRACE("Number of uids %d\n", sblk->no_uids); -+ TRACE("Number of gids %d\n", sblk->no_guids); -+ TRACE("sblk->inode_table_start %llx\n", sblk->inode_table_start); -+ TRACE("sblk->directory_table_start %llx\n", sblk->directory_table_start); -+ if (sblk->s_major > 1) -+ TRACE("sblk->fragment_table_start %llx\n", -+ sblk->fragment_table_start); -+ TRACE("sblk->uid_start %llx\n", sblk->uid_start); -+ -+ s->s_flags |= MS_RDONLY; -+ s->s_op = &squashfs_ops; -+ -+ /* Init inode_table block pointer array */ -+ if (!(msblk->block_cache = kmalloc(sizeof(struct squashfs_cache) * -+ SQUASHFS_CACHED_BLKS, GFP_KERNEL))) { -+ ERROR("Failed to allocate block cache\n"); -+ goto failed_mount; -+ } -+ -+ for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) -+ msblk->block_cache[i].block = SQUASHFS_INVALID_BLK; -+ -+ msblk->next_cache = 0; -+ -+ /* Allocate read_data block */ -+ msblk->read_size = (sblk->block_size < SQUASHFS_METADATA_SIZE) ? -+ SQUASHFS_METADATA_SIZE : -+ sblk->block_size; -+ -+ if (!(msblk->read_data = kmalloc(msblk->read_size, GFP_KERNEL))) { -+ ERROR("Failed to allocate read_data block\n"); -+ goto failed_mount; -+ } -+ -+ /* Allocate read_page block */ -+ if (!(msblk->read_page = kmalloc(sblk->block_size, GFP_KERNEL))) { -+ ERROR("Failed to allocate read_page block\n"); -+ goto failed_mount; -+ } -+ -+ /* Allocate uid and gid tables */ -+ if (!(msblk->uid = kmalloc((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int), GFP_KERNEL))) { -+ ERROR("Failed to allocate uid/gid table\n"); -+ goto failed_mount; -+ } -+ msblk->guid = msblk->uid + sblk->no_uids; -+ -+ if (msblk->swap) { -+ unsigned int suid[sblk->no_uids + sblk->no_guids]; -+ -+ if (!squashfs_read_data(s, (char *) &suid, sblk->uid_start, -+ ((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int)) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) { -+ ERROR("unable to read uid/gid table\n"); -+ goto failed_mount; -+ } -+ -+ SQUASHFS_SWAP_DATA(msblk->uid, suid, (sblk->no_uids + -+ sblk->no_guids), (sizeof(unsigned int) * 8)); -+ } else -+ if (!squashfs_read_data(s, (char *) msblk->uid, sblk->uid_start, -+ ((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int)) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) { -+ ERROR("unable to read uid/gid table\n"); -+ goto failed_mount; -+ } -+ -+ -+ if (sblk->s_major == 1 && squashfs_1_0_supported(msblk)) -+ goto allocate_root; -+ -+ if (!(msblk->fragment = kmalloc(sizeof(struct squashfs_fragment_cache) * -+ SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL))) { -+ ERROR("Failed to allocate fragment block cache\n"); -+ goto failed_mount; -+ } -+ -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) { -+ msblk->fragment[i].locked = 0; -+ msblk->fragment[i].block = SQUASHFS_INVALID_BLK; -+ msblk->fragment[i].data = NULL; -+ } -+ -+ msblk->next_fragment = 0; -+ -+ /* Allocate fragment index table */ -+ if (msblk->read_fragment_index_table(s) == 0) -+ goto failed_mount; -+ -+allocate_root: -+ if ((root = (msblk->iget)(s, sblk->root_inode)) == NULL) -+ goto failed_mount; -+ -+ if ((s->s_root = d_alloc_root(root)) == NULL) { -+ ERROR("Root inode create failed\n"); -+ iput(root); -+ goto failed_mount; -+ } -+ -+ TRACE("Leaving squashfs_read_super\n"); -+ return 0; -+ -+failed_mount: -+ kfree(msblk->fragment_index); -+ kfree(msblk->fragment); -+ kfree(msblk->uid); -+ kfree(msblk->read_page); -+ kfree(msblk->read_data); -+ kfree(msblk->block_cache); -+ kfree(msblk->fragment_index_2); -+ kfree(s->s_fs_info); -+ s->s_fs_info = NULL; -+ return -EINVAL; -+ -+failure: -+ return -ENOMEM; -+} -+ -+ -+static int squashfs_statfs(struct dentry *dentry, struct kstatfs *buf) -+{ -+ struct super_block *s = dentry->d_sb; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ TRACE("Entered squashfs_statfs\n"); -+ -+ buf->f_type = SQUASHFS_MAGIC; -+ buf->f_bsize = sblk->block_size; -+ buf->f_blocks = ((sblk->bytes_used - 1) >> sblk->block_log) + 1; -+ buf->f_bfree = buf->f_bavail = 0; -+ buf->f_files = sblk->inodes; -+ buf->f_ffree = 0; -+ buf->f_namelen = SQUASHFS_NAME_LEN; -+ -+ return 0; -+} -+ -+ -+static int squashfs_symlink_readpage(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ int index = page->index << PAGE_CACHE_SHIFT, length, bytes; -+ long long block = SQUASHFS_I(inode)->start_block; -+ int offset = SQUASHFS_I(inode)->offset; -+ void *pageaddr = kmap(page); -+ -+ TRACE("Entered squashfs_symlink_readpage, page index %ld, start block " -+ "%llx, offset %x\n", page->index, -+ SQUASHFS_I(inode)->start_block, -+ SQUASHFS_I(inode)->offset); -+ -+ for (length = 0; length < index; length += bytes) { -+ if (!(bytes = squashfs_get_cached_block(inode->i_sb, NULL, -+ block, offset, PAGE_CACHE_SIZE, &block, -+ &offset))) { -+ ERROR("Unable to read symbolic link [%llx:%x]\n", block, -+ offset); -+ goto skip_read; -+ } -+ } -+ -+ if (length != index) { -+ ERROR("(squashfs_symlink_readpage) length != index\n"); -+ bytes = 0; -+ goto skip_read; -+ } -+ -+ bytes = (i_size_read(inode) - length) > PAGE_CACHE_SIZE ? PAGE_CACHE_SIZE : -+ i_size_read(inode) - length; -+ -+ if (!(bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block, -+ offset, bytes, &block, &offset))) -+ ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset); -+ -+skip_read: -+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); -+ kunmap(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ return 0; -+} -+ -+ -+struct meta_index *locate_meta_index(struct inode *inode, int index, int offset) -+{ -+ struct meta_index *meta = NULL; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ int i; -+ -+ down(&msblk->meta_index_mutex); -+ -+ TRACE("locate_meta_index: index %d, offset %d\n", index, offset); -+ -+ if(msblk->meta_index == NULL) -+ goto not_allocated; -+ -+ for (i = 0; i < SQUASHFS_META_NUMBER; i ++) -+ if (msblk->meta_index[i].inode_number == inode->i_ino && -+ msblk->meta_index[i].offset >= offset && -+ msblk->meta_index[i].offset <= index && -+ msblk->meta_index[i].locked == 0) { -+ TRACE("locate_meta_index: entry %d, offset %d\n", i, -+ msblk->meta_index[i].offset); -+ meta = &msblk->meta_index[i]; -+ offset = meta->offset; -+ } -+ -+ if (meta) -+ meta->locked = 1; -+ -+not_allocated: -+ up(&msblk->meta_index_mutex); -+ -+ return meta; -+} -+ -+ -+struct meta_index *empty_meta_index(struct inode *inode, int offset, int skip) -+{ -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct meta_index *meta = NULL; -+ int i; -+ -+ down(&msblk->meta_index_mutex); -+ -+ TRACE("empty_meta_index: offset %d, skip %d\n", offset, skip); -+ -+ if(msblk->meta_index == NULL) { -+ if (!(msblk->meta_index = kmalloc(sizeof(struct meta_index) * -+ SQUASHFS_META_NUMBER, GFP_KERNEL))) { -+ ERROR("Failed to allocate meta_index\n"); -+ goto failed; -+ } -+ for(i = 0; i < SQUASHFS_META_NUMBER; i++) { -+ msblk->meta_index[i].inode_number = 0; -+ msblk->meta_index[i].locked = 0; -+ } -+ msblk->next_meta_index = 0; -+ } -+ -+ for(i = SQUASHFS_META_NUMBER; i && -+ msblk->meta_index[msblk->next_meta_index].locked; i --) -+ msblk->next_meta_index = (msblk->next_meta_index + 1) % -+ SQUASHFS_META_NUMBER; -+ -+ if(i == 0) { -+ TRACE("empty_meta_index: failed!\n"); -+ goto failed; -+ } -+ -+ TRACE("empty_meta_index: returned meta entry %d, %p\n", -+ msblk->next_meta_index, -+ &msblk->meta_index[msblk->next_meta_index]); -+ -+ meta = &msblk->meta_index[msblk->next_meta_index]; -+ msblk->next_meta_index = (msblk->next_meta_index + 1) % -+ SQUASHFS_META_NUMBER; -+ -+ meta->inode_number = inode->i_ino; -+ meta->offset = offset; -+ meta->skip = skip; -+ meta->entries = 0; -+ meta->locked = 1; -+ -+failed: -+ up(&msblk->meta_index_mutex); -+ return meta; -+} -+ -+ -+void release_meta_index(struct inode *inode, struct meta_index *meta) -+{ -+ meta->locked = 0; -+} -+ -+ -+static int read_block_index(struct super_block *s, int blocks, char *block_list, -+ long long *start_block, int *offset) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ unsigned int *block_listp; -+ int block = 0; -+ -+ if (msblk->swap) { -+ char sblock_list[blocks << 2]; -+ -+ if (!squashfs_get_cached_block(s, sblock_list, *start_block, -+ *offset, blocks << 2, start_block, offset)) { -+ ERROR("Unable to read block list [%llx:%x]\n", -+ *start_block, *offset); -+ goto failure; -+ } -+ SQUASHFS_SWAP_INTS(((unsigned int *)block_list), -+ ((unsigned int *)sblock_list), blocks); -+ } else -+ if (!squashfs_get_cached_block(s, block_list, *start_block, -+ *offset, blocks << 2, start_block, offset)) { -+ ERROR("Unable to read block list [%llx:%x]\n", -+ *start_block, *offset); -+ goto failure; -+ } -+ -+ for (block_listp = (unsigned int *) block_list; blocks; -+ block_listp++, blocks --) -+ block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp); -+ -+ return block; -+ -+failure: -+ return -1; -+} -+ -+ -+#define SIZE 256 -+ -+static inline int calculate_skip(int blocks) { -+ int skip = (blocks - 1) / ((SQUASHFS_SLOTS * SQUASHFS_META_ENTRIES + 1) * SQUASHFS_META_INDEXES); -+ return skip >= 7 ? 7 : skip + 1; -+} -+ -+ -+static int get_meta_index(struct inode *inode, int index, -+ long long *index_block, int *index_offset, -+ long long *data_block, char *block_list) -+{ -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int skip = calculate_skip(i_size_read(inode) >> sblk->block_log); -+ int offset = 0; -+ struct meta_index *meta; -+ struct meta_entry *meta_entry; -+ long long cur_index_block = SQUASHFS_I(inode)->u.s1.block_list_start; -+ int cur_offset = SQUASHFS_I(inode)->offset; -+ long long cur_data_block = SQUASHFS_I(inode)->start_block; -+ int i; -+ -+ index /= SQUASHFS_META_INDEXES * skip; -+ -+ while ( offset < index ) { -+ meta = locate_meta_index(inode, index, offset + 1); -+ -+ if (meta == NULL) { -+ if ((meta = empty_meta_index(inode, offset + 1, -+ skip)) == NULL) -+ goto all_done; -+ } else { -+ offset = index < meta->offset + meta->entries ? index : -+ meta->offset + meta->entries - 1; -+ meta_entry = &meta->meta_entry[offset - meta->offset]; -+ cur_index_block = meta_entry->index_block + sblk->inode_table_start; -+ cur_offset = meta_entry->offset; -+ cur_data_block = meta_entry->data_block; -+ TRACE("get_meta_index: offset %d, meta->offset %d, " -+ "meta->entries %d\n", offset, meta->offset, -+ meta->entries); -+ TRACE("get_meta_index: index_block 0x%llx, offset 0x%x" -+ " data_block 0x%llx\n", cur_index_block, -+ cur_offset, cur_data_block); -+ } -+ -+ for (i = meta->offset + meta->entries; i <= index && -+ i < meta->offset + SQUASHFS_META_ENTRIES; i++) { -+ int blocks = skip * SQUASHFS_META_INDEXES; -+ -+ while (blocks) { -+ int block = blocks > (SIZE >> 2) ? (SIZE >> 2) : -+ blocks; -+ int res = read_block_index(inode->i_sb, block, -+ block_list, &cur_index_block, -+ &cur_offset); -+ -+ if (res == -1) -+ goto failed; -+ -+ cur_data_block += res; -+ blocks -= block; -+ } -+ -+ meta_entry = &meta->meta_entry[i - meta->offset]; -+ meta_entry->index_block = cur_index_block - sblk->inode_table_start; -+ meta_entry->offset = cur_offset; -+ meta_entry->data_block = cur_data_block; -+ meta->entries ++; -+ offset ++; -+ } -+ -+ TRACE("get_meta_index: meta->offset %d, meta->entries %d\n", -+ meta->offset, meta->entries); -+ -+ release_meta_index(inode, meta); -+ } -+ -+all_done: -+ *index_block = cur_index_block; -+ *index_offset = cur_offset; -+ *data_block = cur_data_block; -+ -+ return offset * SQUASHFS_META_INDEXES * skip; -+ -+failed: -+ release_meta_index(inode, meta); -+ return -1; -+} -+ -+ -+static long long read_blocklist(struct inode *inode, int index, -+ int readahead_blks, char *block_list, -+ unsigned short **block_p, unsigned int *bsize) -+{ -+ long long block_ptr; -+ int offset; -+ long long block; -+ int res = get_meta_index(inode, index, &block_ptr, &offset, &block, -+ block_list); -+ -+ TRACE("read_blocklist: res %d, index %d, block_ptr 0x%llx, offset" -+ " 0x%x, block 0x%llx\n", res, index, block_ptr, offset, -+ block); -+ -+ if(res == -1) -+ goto failure; -+ -+ index -= res; -+ -+ while ( index ) { -+ int blocks = index > (SIZE >> 2) ? (SIZE >> 2) : index; -+ int res = read_block_index(inode->i_sb, blocks, block_list, -+ &block_ptr, &offset); -+ if (res == -1) -+ goto failure; -+ block += res; -+ index -= blocks; -+ } -+ -+ if (read_block_index(inode->i_sb, 1, block_list, -+ &block_ptr, &offset) == -1) -+ goto failure; -+ *bsize = *((unsigned int *) block_list); -+ -+ return block; -+ -+failure: -+ return 0; -+} -+ -+ -+static int squashfs_readpage(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned char block_list[SIZE]; -+ long long block; -+ unsigned int bsize, i = 0, bytes = 0, byte_offset = 0; -+ int index = page->index >> (sblk->block_log - PAGE_CACHE_SHIFT); -+ void *pageaddr; -+ struct squashfs_fragment_cache *fragment = NULL; -+ char *data_ptr = msblk->read_page; -+ -+ int mask = (1 << (sblk->block_log - PAGE_CACHE_SHIFT)) - 1; -+ int start_index = page->index & ~mask; -+ int end_index = start_index | mask; -+ -+ TRACE("Entered squashfs_readpage, page index %lx, start block %llx\n", -+ page->index, -+ SQUASHFS_I(inode)->start_block); -+ -+ if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> -+ PAGE_CACHE_SHIFT)) -+ goto skip_read; -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || index < (i_size_read(inode) >> -+ sblk->block_log)) { -+ if ((block = (msblk->read_blocklist)(inode, index, 1, -+ block_list, NULL, &bsize)) == 0) -+ goto skip_read; -+ -+ down(&msblk->read_page_mutex); -+ -+ if (!(bytes = squashfs_read_data(inode->i_sb, msblk->read_page, -+ block, bsize, NULL))) { -+ ERROR("Unable to read page, block %llx, size %x\n", block, -+ bsize); -+ up(&msblk->read_page_mutex); -+ goto skip_read; -+ } -+ } else { -+ if ((fragment = get_cached_fragment(inode->i_sb, -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, -+ SQUASHFS_I(inode)->u.s1.fragment_size)) -+ == NULL) { -+ ERROR("Unable to read page, block %llx, size %x\n", -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, -+ (int) SQUASHFS_I(inode)-> -+ u.s1.fragment_size); -+ goto skip_read; -+ } -+ bytes = SQUASHFS_I(inode)->u.s1.fragment_offset + -+ (i_size_read(inode) & (sblk->block_size -+ - 1)); -+ byte_offset = SQUASHFS_I(inode)->u.s1.fragment_offset; -+ data_ptr = fragment->data; -+ } -+ -+ for (i = start_index; i <= end_index && byte_offset < bytes; -+ i++, byte_offset += PAGE_CACHE_SIZE) { -+ struct page *push_page; -+ int available_bytes = (bytes - byte_offset) > PAGE_CACHE_SIZE ? -+ PAGE_CACHE_SIZE : bytes - byte_offset; -+ -+ TRACE("bytes %d, i %d, byte_offset %d, available_bytes %d\n", -+ bytes, i, byte_offset, available_bytes); -+ -+ if (i == page->index) { -+ pageaddr = kmap_atomic(page, KM_USER0); -+ memcpy(pageaddr, data_ptr + byte_offset, -+ available_bytes); -+ memset(pageaddr + available_bytes, 0, -+ PAGE_CACHE_SIZE - available_bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ } else if ((push_page = -+ grab_cache_page_nowait(page->mapping, i))) { -+ pageaddr = kmap_atomic(push_page, KM_USER0); -+ -+ memcpy(pageaddr, data_ptr + byte_offset, -+ available_bytes); -+ memset(pageaddr + available_bytes, 0, -+ PAGE_CACHE_SIZE - available_bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(push_page); -+ SetPageUptodate(push_page); -+ unlock_page(push_page); -+ page_cache_release(push_page); -+ } -+ } -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || index < (i_size_read(inode) >> -+ sblk->block_log)) -+ up(&msblk->read_page_mutex); -+ else -+ release_cached_fragment(msblk, fragment); -+ -+ return 0; -+ -+skip_read: -+ pageaddr = kmap_atomic(page, KM_USER0); -+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ return 0; -+} -+ -+ -+static int squashfs_readpage4K(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned char block_list[SIZE]; -+ long long block; -+ unsigned int bsize, bytes = 0; -+ void *pageaddr; -+ -+ TRACE("Entered squashfs_readpage4K, page index %lx, start block %llx\n", -+ page->index, -+ SQUASHFS_I(inode)->start_block); -+ -+ if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> -+ PAGE_CACHE_SHIFT)) { -+ pageaddr = kmap_atomic(page, KM_USER0); -+ goto skip_read; -+ } -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || page->index < (i_size_read(inode) >> -+ sblk->block_log)) { -+ block = (msblk->read_blocklist)(inode, page->index, 1, -+ block_list, NULL, &bsize); -+ -+ down(&msblk->read_page_mutex); -+ bytes = squashfs_read_data(inode->i_sb, msblk->read_page, block, -+ bsize, NULL); -+ pageaddr = kmap_atomic(page, KM_USER0); -+ if (bytes) -+ memcpy(pageaddr, msblk->read_page, bytes); -+ else -+ ERROR("Unable to read page, block %llx, size %x\n", -+ block, bsize); -+ up(&msblk->read_page_mutex); -+ } else { -+ struct squashfs_fragment_cache *fragment = -+ get_cached_fragment(inode->i_sb, -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, -+ SQUASHFS_I(inode)-> u.s1.fragment_size); -+ pageaddr = kmap_atomic(page, KM_USER0); -+ if (fragment) { -+ bytes = i_size_read(inode) & (sblk->block_size - 1); -+ memcpy(pageaddr, fragment->data + SQUASHFS_I(inode)-> -+ u.s1.fragment_offset, bytes); -+ release_cached_fragment(msblk, fragment); -+ } else -+ ERROR("Unable to read page, block %llx, size %x\n", -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, (int) -+ SQUASHFS_I(inode)-> u.s1.fragment_size); -+ } -+ -+skip_read: -+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ return 0; -+} -+ -+ -+static int get_dir_index_using_offset(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ long long f_pos) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index index; -+ -+ TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n", -+ i_count, (unsigned int) f_pos); -+ -+ f_pos =- 3; -+ if (f_pos == 0) -+ goto finish; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX(&index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) &index, -+ index_start, index_offset, -+ sizeof(index), &index_start, -+ &index_offset); -+ -+ if (index.index > f_pos) -+ break; -+ -+ squashfs_get_cached_block(s, NULL, index_start, index_offset, -+ index.size + 1, &index_start, -+ &index_offset); -+ -+ length = index.index; -+ *next_block = index.start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ -+finish: -+ return length + 3; -+} -+ -+ -+static int get_dir_index_using_name(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ const char *name, int size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ char buffer[sizeof(struct squashfs_dir_index) + SQUASHFS_NAME_LEN + 1]; -+ struct squashfs_dir_index *index = (struct squashfs_dir_index *) buffer; -+ char str[SQUASHFS_NAME_LEN + 1]; -+ -+ TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count); -+ -+ strncpy(str, name, size); -+ str[size] = '\0'; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX(index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) index, -+ index_start, index_offset, -+ sizeof(struct squashfs_dir_index), -+ &index_start, &index_offset); -+ -+ squashfs_get_cached_block(s, index->name, index_start, -+ index_offset, index->size + 1, -+ &index_start, &index_offset); -+ -+ index->name[index->size + 1] = '\0'; -+ -+ if (strcmp(index->name, str) > 0) -+ break; -+ -+ length = index->index; -+ *next_block = index->start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ return length + 3; -+} -+ -+ -+static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir) -+{ -+ struct inode *i = file->f_dentry->d_inode; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0, -+ dir_count; -+ struct squashfs_dir_header dirh; -+ char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN + 1]; -+ struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer; -+ -+ TRACE("Entered squashfs_readdir [%llx:%x]\n", next_block, next_offset); -+ -+ while(file->f_pos < 3) { -+ char *name; -+ int size, i_ino; -+ -+ if(file->f_pos == 0) { -+ name = "."; -+ size = 1; -+ i_ino = i->i_ino; -+ } else { -+ name = ".."; -+ size = 2; -+ i_ino = SQUASHFS_I(i)->u.s2.parent_inode; -+ } -+ TRACE("Calling filldir(%x, %s, %d, %d, %d, %d)\n", -+ (unsigned int) dirent, name, size, (int) -+ file->f_pos, i_ino, -+ squashfs_filetype_table[1]); -+ -+ if (filldir(dirent, name, size, -+ file->f_pos, i_ino, -+ squashfs_filetype_table[1]) < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos += size; -+ dirs_read++; -+ } -+ -+ length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, -+ file->f_pos); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header sdirh; -+ -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block, next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block, next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, -+ dire->size + 1, &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (file->f_pos >= length) -+ continue; -+ -+ dire->name[dire->size + 1] = '\0'; -+ -+ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d, %d)\n", -+ (unsigned int) dirent, dire->name, -+ dire->size + 1, (int) file->f_pos, -+ dirh.start_block, dire->offset, -+ dirh.inode_number + dire->inode_number, -+ squashfs_filetype_table[dire->type]); -+ -+ if (filldir(dirent, dire->name, dire->size + 1, -+ file->f_pos, -+ dirh.inode_number + dire->inode_number, -+ squashfs_filetype_table[dire->type]) -+ < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos = length; -+ dirs_read++; -+ } -+ } -+ -+finish: -+ return dirs_read; -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ return 0; -+} -+ -+ -+static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry, -+ struct nameidata *nd) -+{ -+ const unsigned char *name = dentry->d_name.name; -+ int len = dentry->d_name.len; -+ struct inode *inode = NULL; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, -+ dir_count; -+ struct squashfs_dir_header dirh; -+ char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN]; -+ struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer; -+ -+ TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset); -+ -+ if (len > SQUASHFS_NAME_LEN) -+ goto exit_loop; -+ -+ length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, name, -+ len); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header sdirh; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block,next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block,next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, dire->size + 1, -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (name[0] < dire->name[0]) -+ goto exit_loop; -+ -+ if ((len == dire->size + 1) && !strncmp(name, -+ dire->name, len)) { -+ squashfs_inode_t ino = -+ SQUASHFS_MKINODE(dirh.start_block, -+ dire->offset); -+ -+ TRACE("calling squashfs_iget for directory " -+ "entry %s, inode %x:%x, %d\n", name, -+ dirh.start_block, dire->offset, -+ dirh.inode_number + dire->inode_number); -+ -+ inode = (msblk->iget)(i->i_sb, ino); -+ -+ goto exit_loop; -+ } -+ } -+ } -+ -+exit_loop: -+ d_add(dentry, inode); -+ return ERR_PTR(0); -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ goto exit_loop; -+} -+ -+ -+static void squashfs_put_super(struct super_block *s) -+{ -+ int i; -+ -+ if (s->s_fs_info) { -+ struct squashfs_sb_info *sbi = s->s_fs_info; -+ if (sbi->block_cache) -+ for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) -+ if (sbi->block_cache[i].block != -+ SQUASHFS_INVALID_BLK) -+ kfree(sbi->block_cache[i].data); -+ if (sbi->fragment) -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) -+ SQUASHFS_FREE(sbi->fragment[i].data); -+ kfree(sbi->fragment); -+ kfree(sbi->block_cache); -+ kfree(sbi->read_data); -+ kfree(sbi->read_page); -+ kfree(sbi->uid); -+ kfree(sbi->fragment_index); -+ kfree(sbi->fragment_index_2); -+ kfree(sbi->meta_index); -+ kfree(s->s_fs_info); -+ s->s_fs_info = NULL; -+ } -+} -+ -+ -+static int squashfs_get_sb(struct file_system_type *fs_type, -+ int flags, const char *dev_name, void *data, struct vfsmount *mnt) -+{ -+ return get_sb_bdev(fs_type, flags, dev_name, data, squashfs_fill_super, mnt); -+} -+ -+ -+static int __init init_squashfs_fs(void) -+{ -+ int err = init_inodecache(); -+ if (err) -+ goto out; -+ -+ printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) " -+ "Phillip Lougher\n"); -+ -+ if (!(stream.workspace = vmalloc(zlib_inflate_workspacesize()))) { -+ ERROR("Failed to allocate zlib workspace\n"); -+ destroy_inodecache(); -+ err = -ENOMEM; -+ goto out; -+ } -+ -+ if ((err = register_filesystem(&squashfs_fs_type))) { -+ vfree(stream.workspace); -+ destroy_inodecache(); -+ } -+ -+out: -+ return err; -+} -+ -+ -+static void __exit exit_squashfs_fs(void) -+{ -+ vfree(stream.workspace); -+ unregister_filesystem(&squashfs_fs_type); -+ destroy_inodecache(); -+} -+ -+ -+static struct kmem_cache* squashfs_inode_cachep; -+ -+ -+static struct inode *squashfs_alloc_inode(struct super_block *sb) -+{ -+ struct squashfs_inode_info *ei; -+ ei = kmem_cache_alloc(squashfs_inode_cachep, GFP_KERNEL); -+ if (!ei) -+ return NULL; -+ return &ei->vfs_inode; -+} -+ -+ -+static void squashfs_destroy_inode(struct inode *inode) -+{ -+ kmem_cache_free(squashfs_inode_cachep, SQUASHFS_I(inode)); -+} -+ -+ -+static void init_once(void * foo, struct kmem_cache *cachep, unsigned long flags) -+{ -+ struct squashfs_inode_info *ei = foo; -+ -+ inode_init_once(&ei->vfs_inode); -+} -+ -+ -+static int __init init_inodecache(void) -+{ -+ squashfs_inode_cachep = kmem_cache_create("squashfs_inode_cache", -+ sizeof(struct squashfs_inode_info), -+ 0, SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT, -+ init_once); -+ if (squashfs_inode_cachep == NULL) -+ return -ENOMEM; -+ return 0; -+} -+ -+ -+static void destroy_inodecache(void) -+{ -+ kmem_cache_destroy(squashfs_inode_cachep); -+} -+ -+ -+module_init(init_squashfs_fs); -+module_exit(exit_squashfs_fs); -+MODULE_DESCRIPTION("squashfs, a compressed read-only filesystem"); -+MODULE_AUTHOR("Phillip Lougher "); -Index: linux-2.6.22/fs/squashfs/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/fs/squashfs/Makefile 2007-08-28 21:56:34.000000000 +0100 -@@ -0,0 +1,7 @@ -+# -+# Makefile for the linux squashfs routines. -+# -+ -+obj-$(CONFIG_SQUASHFS) += squashfs.o -+squashfs-y += inode.o -+squashfs-y += squashfs2_0.o -Index: linux-2.6.22/fs/squashfs/squashfs2_0.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/fs/squashfs/squashfs2_0.c 2007-08-28 21:56:34.000000000 +0100 -@@ -0,0 +1,757 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs2_0.c -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "squashfs.h" -+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir); -+static struct dentry *squashfs_lookup_2(struct inode *, struct dentry *, -+ struct nameidata *); -+ -+static struct file_operations squashfs_dir_ops_2 = { -+ .read = generic_read_dir, -+ .readdir = squashfs_readdir_2 -+}; -+ -+static struct inode_operations squashfs_dir_inode_ops_2 = { -+ .lookup = squashfs_lookup_2 -+}; -+ -+static unsigned char squashfs_filetype_table[] = { -+ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK -+}; -+ -+static int read_fragment_index_table_2(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ if (!(msblk->fragment_index_2 = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES_2 -+ (sblk->fragments), GFP_KERNEL))) { -+ ERROR("Failed to allocate uid/gid table\n"); -+ return 0; -+ } -+ -+ if (SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments) && -+ !squashfs_read_data(s, (char *) -+ msblk->fragment_index_2, -+ sblk->fragment_table_start, -+ SQUASHFS_FRAGMENT_INDEX_BYTES_2 -+ (sblk->fragments) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) { -+ ERROR("unable to read fragment index table\n"); -+ return 0; -+ } -+ -+ if (msblk->swap) { -+ int i; -+ unsigned int fragment; -+ -+ for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES_2(sblk->fragments); -+ i++) { -+ SQUASHFS_SWAP_FRAGMENT_INDEXES_2((&fragment), -+ &msblk->fragment_index_2[i], 1); -+ msblk->fragment_index_2[i] = fragment; -+ } -+ } -+ -+ return 1; -+} -+ -+ -+static int get_fragment_location_2(struct super_block *s, unsigned int fragment, -+ long long *fragment_start_block, -+ unsigned int *fragment_size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ long long start_block = -+ msblk->fragment_index_2[SQUASHFS_FRAGMENT_INDEX_2(fragment)]; -+ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET_2(fragment); -+ struct squashfs_fragment_entry_2 fragment_entry; -+ -+ if (msblk->swap) { -+ struct squashfs_fragment_entry_2 sfragment_entry; -+ -+ if (!squashfs_get_cached_block(s, (char *) &sfragment_entry, -+ start_block, offset, -+ sizeof(sfragment_entry), &start_block, -+ &offset)) -+ goto out; -+ SQUASHFS_SWAP_FRAGMENT_ENTRY_2(&fragment_entry, &sfragment_entry); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) &fragment_entry, -+ start_block, offset, -+ sizeof(fragment_entry), &start_block, -+ &offset)) -+ goto out; -+ -+ *fragment_start_block = fragment_entry.start_block; -+ *fragment_size = fragment_entry.size; -+ -+ return 1; -+ -+out: -+ return 0; -+} -+ -+ -+static struct inode *squashfs_new_inode(struct super_block *s, -+ struct squashfs_base_inode_header_2 *inodeb, unsigned int ino) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ struct inode *i = new_inode(s); -+ -+ if (i) { -+ i->i_ino = ino; -+ i->i_mtime.tv_sec = sblk->mkfs_time; -+ i->i_atime.tv_sec = sblk->mkfs_time; -+ i->i_ctime.tv_sec = sblk->mkfs_time; -+ i->i_uid = msblk->uid[inodeb->uid]; -+ i->i_mode = inodeb->mode; -+ i->i_nlink = 1; -+ i->i_size = 0; -+ if (inodeb->guid == SQUASHFS_GUIDS) -+ i->i_gid = i->i_uid; -+ else -+ i->i_gid = msblk->guid[inodeb->guid]; -+ } -+ -+ return i; -+} -+ -+ -+static struct inode *squashfs_iget_2(struct super_block *s, squashfs_inode_t inode) -+{ -+ struct inode *i; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned int block = SQUASHFS_INODE_BLK(inode) + -+ sblk->inode_table_start; -+ unsigned int offset = SQUASHFS_INODE_OFFSET(inode); -+ unsigned int ino = SQUASHFS_MK_VFS_INODE(block -+ - sblk->inode_table_start, offset); -+ long long next_block; -+ unsigned int next_offset; -+ union squashfs_inode_header_2 id, sid; -+ struct squashfs_base_inode_header_2 *inodeb = &id.base, -+ *sinodeb = &sid.base; -+ -+ TRACE("Entered squashfs_iget\n"); -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) sinodeb, block, -+ offset, sizeof(*sinodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_BASE_INODE_HEADER_2(inodeb, sinodeb, -+ sizeof(*sinodeb)); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) inodeb, block, -+ offset, sizeof(*inodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ switch(inodeb->inode_type) { -+ case SQUASHFS_FILE_TYPE: { -+ struct squashfs_reg_inode_header_2 *inodep = &id.reg; -+ struct squashfs_reg_inode_header_2 *sinodep = &sid.reg; -+ long long frag_blk; -+ unsigned int frag_size; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_REG_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG && -+ !get_fragment_location_2(s, -+ inodep->fragment, &frag_blk, &frag_size)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ if (sblk->block_size > 4096) -+ i->i_data.a_ops = &squashfs_aops; -+ else -+ i->i_data.a_ops = &squashfs_aops_4K; -+ -+ TRACE("File inode %x:%x, start_block %x, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_DIR_TYPE: { -+ struct squashfs_dir_inode_header_2 *inodep = &id.dir; -+ struct squashfs_dir_inode_header_2 *sinodep = &sid.dir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DIR_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops_2; -+ i->i_fop = &squashfs_dir_ops_2; -+ i->i_mode |= S_IFDIR; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = 0; -+ SQUASHFS_I(i)->u.s2.parent_inode = 0; -+ -+ TRACE("Directory inode %x:%x, start_block %x, offset " -+ "%x\n", SQUASHFS_INODE_BLK(inode), -+ offset, inodep->start_block, -+ inodep->offset); -+ break; -+ } -+ case SQUASHFS_LDIR_TYPE: { -+ struct squashfs_ldir_inode_header_2 *inodep = &id.ldir; -+ struct squashfs_ldir_inode_header_2 *sinodep = &sid.ldir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LDIR_INODE_HEADER_2(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops_2; -+ i->i_fop = &squashfs_dir_ops_2; -+ i->i_mode |= S_IFDIR; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_start = next_block; -+ SQUASHFS_I(i)->u.s2.directory_index_offset = -+ next_offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = -+ inodep->i_count; -+ SQUASHFS_I(i)->u.s2.parent_inode = 0; -+ -+ TRACE("Long directory inode %x:%x, start_block %x, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, inodep->offset); -+ break; -+ } -+ case SQUASHFS_SYMLINK_TYPE: { -+ struct squashfs_symlink_inode_header_2 *inodep = -+ &id.symlink; -+ struct squashfs_symlink_inode_header_2 *sinodep = -+ &sid.symlink; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_size = inodep->symlink_size; -+ i->i_op = &page_symlink_inode_operations; -+ i->i_data.a_ops = &squashfs_symlink_aops; -+ i->i_mode |= S_IFLNK; -+ SQUASHFS_I(i)->start_block = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ -+ TRACE("Symbolic link inode %x:%x, start_block %llx, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ next_block, next_offset); -+ break; -+ } -+ case SQUASHFS_BLKDEV_TYPE: -+ case SQUASHFS_CHRDEV_TYPE: { -+ struct squashfs_dev_inode_header_2 *inodep = &id.dev; -+ struct squashfs_dev_inode_header_2 *sinodep = &sid.dev; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DEV_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_mode |= (inodeb->inode_type == -+ SQUASHFS_CHRDEV_TYPE) ? S_IFCHR : -+ S_IFBLK; -+ init_special_inode(i, i->i_mode, -+ old_decode_dev(inodep->rdev)); -+ -+ TRACE("Device inode %x:%x, rdev %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->rdev); -+ break; -+ } -+ case SQUASHFS_FIFO_TYPE: -+ case SQUASHFS_SOCKET_TYPE: { -+ if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL) -+ goto failed_read1; -+ -+ i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE) -+ ? S_IFIFO : S_IFSOCK; -+ init_special_inode(i, i->i_mode, 0); -+ break; -+ } -+ default: -+ ERROR("Unknown inode type %d in squashfs_iget!\n", -+ inodeb->inode_type); -+ goto failed_read1; -+ } -+ -+ insert_inode_hash(i); -+ return i; -+ -+failed_read: -+ ERROR("Unable to read inode [%x:%x]\n", block, offset); -+ -+failed_read1: -+ return NULL; -+} -+ -+ -+static int get_dir_index_using_offset(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ long long f_pos) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index_2 index; -+ -+ TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n", -+ i_count, (unsigned int) f_pos); -+ -+ if (f_pos == 0) -+ goto finish; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index_2 sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX_2(&index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) &index, -+ index_start, index_offset, -+ sizeof(index), &index_start, -+ &index_offset); -+ -+ if (index.index > f_pos) -+ break; -+ -+ squashfs_get_cached_block(s, NULL, index_start, index_offset, -+ index.size + 1, &index_start, -+ &index_offset); -+ -+ length = index.index; -+ *next_block = index.start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ -+finish: -+ return length; -+} -+ -+ -+static int get_dir_index_using_name(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ const char *name, int size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ char buffer[sizeof(struct squashfs_dir_index_2) + SQUASHFS_NAME_LEN + 1]; -+ struct squashfs_dir_index_2 *index = (struct squashfs_dir_index_2 *) buffer; -+ char str[SQUASHFS_NAME_LEN + 1]; -+ -+ TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count); -+ -+ strncpy(str, name, size); -+ str[size] = '\0'; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index_2 sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX_2(index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) index, -+ index_start, index_offset, -+ sizeof(struct squashfs_dir_index_2), -+ &index_start, &index_offset); -+ -+ squashfs_get_cached_block(s, index->name, index_start, -+ index_offset, index->size + 1, -+ &index_start, &index_offset); -+ -+ index->name[index->size + 1] = '\0'; -+ -+ if (strcmp(index->name, str) > 0) -+ break; -+ -+ length = index->index; -+ *next_block = index->start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ return length; -+} -+ -+ -+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir) -+{ -+ struct inode *i = file->f_dentry->d_inode; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0, -+ dir_count; -+ struct squashfs_dir_header_2 dirh; -+ char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN + 1]; -+ struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer; -+ -+ TRACE("Entered squashfs_readdir_2 [%llx:%x]\n", next_block, next_offset); -+ -+ length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, -+ file->f_pos); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header_2 sdirh; -+ -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry_2 sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block, next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block, next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, -+ dire->size + 1, &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (file->f_pos >= length) -+ continue; -+ -+ dire->name[dire->size + 1] = '\0'; -+ -+ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n", -+ (unsigned int) dirent, dire->name, -+ dire->size + 1, (int) file->f_pos, -+ dirh.start_block, dire->offset, -+ squashfs_filetype_table[dire->type]); -+ -+ if (filldir(dirent, dire->name, dire->size + 1, -+ file->f_pos, SQUASHFS_MK_VFS_INODE( -+ dirh.start_block, dire->offset), -+ squashfs_filetype_table[dire->type]) -+ < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos = length; -+ dirs_read++; -+ } -+ } -+ -+finish: -+ return dirs_read; -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ return 0; -+} -+ -+ -+static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry, -+ struct nameidata *nd) -+{ -+ const unsigned char *name = dentry->d_name.name; -+ int len = dentry->d_name.len; -+ struct inode *inode = NULL; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, -+ dir_count; -+ struct squashfs_dir_header_2 dirh; -+ char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN]; -+ struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer; -+ int sorted = sblk->s_major == 2 && sblk->s_minor >= 1; -+ -+ TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset); -+ -+ if (len > SQUASHFS_NAME_LEN) -+ goto exit_loop; -+ -+ length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, name, -+ len); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header_2 sdirh; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry_2 sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block,next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block,next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, dire->size + 1, -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (sorted && name[0] < dire->name[0]) -+ goto exit_loop; -+ -+ if ((len == dire->size + 1) && !strncmp(name, -+ dire->name, len)) { -+ squashfs_inode_t ino = -+ SQUASHFS_MKINODE(dirh.start_block, -+ dire->offset); -+ -+ TRACE("calling squashfs_iget for directory " -+ "entry %s, inode %x:%x, %lld\n", name, -+ dirh.start_block, dire->offset, ino); -+ -+ inode = (msblk->iget)(i->i_sb, ino); -+ -+ goto exit_loop; -+ } -+ } -+ } -+ -+exit_loop: -+ d_add(dentry, inode); -+ return ERR_PTR(0); -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ goto exit_loop; -+} -+ -+ -+int squashfs_2_0_supported(struct squashfs_sb_info *msblk) -+{ -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ msblk->iget = squashfs_iget_2; -+ msblk->read_fragment_index_table = read_fragment_index_table_2; -+ -+ sblk->bytes_used = sblk->bytes_used_2; -+ sblk->uid_start = sblk->uid_start_2; -+ sblk->guid_start = sblk->guid_start_2; -+ sblk->inode_table_start = sblk->inode_table_start_2; -+ sblk->directory_table_start = sblk->directory_table_start_2; -+ sblk->fragment_table_start = sblk->fragment_table_start_2; -+ -+ return 1; -+} -Index: linux-2.6.22/fs/squashfs/squashfs.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/fs/squashfs/squashfs.h 2007-08-28 21:56:34.000000000 +0100 -@@ -0,0 +1,86 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs.h -+ */ -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+#undef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+#endif -+ -+#ifdef SQUASHFS_TRACE -+#define TRACE(s, args...) printk(KERN_NOTICE "SQUASHFS: "s, ## args) -+#else -+#define TRACE(s, args...) {} -+#endif -+ -+#define ERROR(s, args...) printk(KERN_ERR "SQUASHFS error: "s, ## args) -+ -+#define SERROR(s, args...) do { \ -+ if (!silent) \ -+ printk(KERN_ERR "SQUASHFS error: "s, ## args);\ -+ } while(0) -+ -+#define WARNING(s, args...) printk(KERN_WARNING "SQUASHFS: "s, ## args) -+ -+static inline struct squashfs_inode_info *SQUASHFS_I(struct inode *inode) -+{ -+ return list_entry(inode, struct squashfs_inode_info, vfs_inode); -+} -+ -+#if defined(CONFIG_SQUASHFS_1_0_COMPATIBILITY ) || defined(CONFIG_SQUASHFS_2_0_COMPATIBILITY) -+#define SQSH_EXTERN -+extern unsigned int squashfs_read_data(struct super_block *s, char *buffer, -+ long long index, unsigned int length, -+ long long *next_index); -+extern int squashfs_get_cached_block(struct super_block *s, char *buffer, -+ long long block, unsigned int offset, -+ int length, long long *next_block, -+ unsigned int *next_offset); -+extern void release_cached_fragment(struct squashfs_sb_info *msblk, struct -+ squashfs_fragment_cache *fragment); -+extern struct squashfs_fragment_cache *get_cached_fragment(struct super_block -+ *s, long long start_block, -+ int length); -+extern struct address_space_operations squashfs_symlink_aops; -+extern struct address_space_operations squashfs_aops; -+extern struct address_space_operations squashfs_aops_4K; -+extern struct inode_operations squashfs_dir_inode_ops; -+#else -+#define SQSH_EXTERN static -+#endif -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+extern int squashfs_1_0_supported(struct squashfs_sb_info *msblk); -+#else -+static inline int squashfs_1_0_supported(struct squashfs_sb_info *msblk) -+{ -+ return 0; -+} -+#endif -+ -+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+extern int squashfs_2_0_supported(struct squashfs_sb_info *msblk); -+#else -+static inline int squashfs_2_0_supported(struct squashfs_sb_info *msblk) -+{ -+ return 0; -+} -+#endif -Index: linux-2.6.22/include/linux/squashfs_fs.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/linux/squashfs_fs.h 2007-08-28 21:56:34.000000000 +0100 -@@ -0,0 +1,911 @@ -+#ifndef SQUASHFS_FS -+#define SQUASHFS_FS -+ -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs.h -+ */ -+ -+#ifndef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+#define CONFIG_SQUASHFS_2_0_COMPATIBILITY -+#endif -+ -+#ifdef CONFIG_SQUASHFS_VMALLOC -+#define SQUASHFS_ALLOC(a) vmalloc(a) -+#define SQUASHFS_FREE(a) vfree(a) -+#else -+#define SQUASHFS_ALLOC(a) kmalloc(a, GFP_KERNEL) -+#define SQUASHFS_FREE(a) kfree(a) -+#endif -+#define SQUASHFS_CACHED_FRAGMENTS CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE -+#define SQUASHFS_MAJOR 3 -+#define SQUASHFS_MINOR 0 -+#define SQUASHFS_MAGIC 0x73717368 -+#define SQUASHFS_MAGIC_SWAP 0x68737173 -+#define SQUASHFS_START 0 -+ -+/* size of metadata (inode and directory) blocks */ -+#define SQUASHFS_METADATA_SIZE 8192 -+#define SQUASHFS_METADATA_LOG 13 -+ -+/* default size of data blocks */ -+#define SQUASHFS_FILE_SIZE 65536 -+#define SQUASHFS_FILE_LOG 16 -+ -+#define SQUASHFS_FILE_MAX_SIZE 65536 -+ -+/* Max number of uids and gids */ -+#define SQUASHFS_UIDS 256 -+#define SQUASHFS_GUIDS 255 -+ -+/* Max length of filename (not 255) */ -+#define SQUASHFS_NAME_LEN 256 -+ -+#define SQUASHFS_INVALID ((long long) 0xffffffffffff) -+#define SQUASHFS_INVALID_FRAG ((unsigned int) 0xffffffff) -+#define SQUASHFS_INVALID_BLK ((long long) -1) -+#define SQUASHFS_USED_BLK ((long long) -2) -+ -+/* Filesystem flags */ -+#define SQUASHFS_NOI 0 -+#define SQUASHFS_NOD 1 -+#define SQUASHFS_CHECK 2 -+#define SQUASHFS_NOF 3 -+#define SQUASHFS_NO_FRAG 4 -+#define SQUASHFS_ALWAYS_FRAG 5 -+#define SQUASHFS_DUPLICATE 6 -+ -+#define SQUASHFS_BIT(flag, bit) ((flag >> bit) & 1) -+ -+#define SQUASHFS_UNCOMPRESSED_INODES(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOI) -+ -+#define SQUASHFS_UNCOMPRESSED_DATA(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOD) -+ -+#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOF) -+ -+#define SQUASHFS_NO_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NO_FRAG) -+ -+#define SQUASHFS_ALWAYS_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_ALWAYS_FRAG) -+ -+#define SQUASHFS_DUPLICATES(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_DUPLICATE) -+ -+#define SQUASHFS_CHECK_DATA(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_CHECK) -+ -+#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, \ -+ duplicate_checking) (noi | (nod << 1) | (check_data << 2) \ -+ | (nof << 3) | (no_frag << 4) | (always_frag << 5) | \ -+ (duplicate_checking << 6)) -+ -+/* Max number of types and file types */ -+#define SQUASHFS_DIR_TYPE 1 -+#define SQUASHFS_FILE_TYPE 2 -+#define SQUASHFS_SYMLINK_TYPE 3 -+#define SQUASHFS_BLKDEV_TYPE 4 -+#define SQUASHFS_CHRDEV_TYPE 5 -+#define SQUASHFS_FIFO_TYPE 6 -+#define SQUASHFS_SOCKET_TYPE 7 -+#define SQUASHFS_LDIR_TYPE 8 -+#define SQUASHFS_LREG_TYPE 9 -+ -+/* 1.0 filesystem type definitions */ -+#define SQUASHFS_TYPES 5 -+#define SQUASHFS_IPC_TYPE 0 -+ -+/* Flag whether block is compressed or uncompressed, bit is set if block is -+ * uncompressed */ -+#define SQUASHFS_COMPRESSED_BIT (1 << 15) -+ -+#define SQUASHFS_COMPRESSED_SIZE(B) (((B) & ~SQUASHFS_COMPRESSED_BIT) ? \ -+ (B) & ~SQUASHFS_COMPRESSED_BIT : SQUASHFS_COMPRESSED_BIT) -+ -+#define SQUASHFS_COMPRESSED(B) (!((B) & SQUASHFS_COMPRESSED_BIT)) -+ -+#define SQUASHFS_COMPRESSED_BIT_BLOCK (1 << 24) -+ -+#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B) (((B) & \ -+ ~SQUASHFS_COMPRESSED_BIT_BLOCK) ? (B) & \ -+ ~SQUASHFS_COMPRESSED_BIT_BLOCK : SQUASHFS_COMPRESSED_BIT_BLOCK) -+ -+#define SQUASHFS_COMPRESSED_BLOCK(B) (!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK)) -+ -+/* -+ * Inode number ops. Inodes consist of a compressed block number, and an -+ * uncompressed offset within that block -+ */ -+#define SQUASHFS_INODE_BLK(a) ((unsigned int) ((a) >> 16)) -+ -+#define SQUASHFS_INODE_OFFSET(a) ((unsigned int) ((a) & 0xffff)) -+ -+#define SQUASHFS_MKINODE(A, B) ((squashfs_inode_t)(((squashfs_inode_t) (A)\ -+ << 16) + (B))) -+ -+/* Compute 32 bit VFS inode number from squashfs inode number */ -+#define SQUASHFS_MK_VFS_INODE(a, b) ((unsigned int) (((a) << 8) + \ -+ ((b) >> 2) + 1)) -+/* XXX */ -+ -+/* Translate between VFS mode and squashfs mode */ -+#define SQUASHFS_MODE(a) ((a) & 0xfff) -+ -+/* fragment and fragment table defines */ -+#define SQUASHFS_FRAGMENT_BYTES(A) (A * sizeof(struct squashfs_fragment_entry)) -+ -+#define SQUASHFS_FRAGMENT_INDEX(A) (SQUASHFS_FRAGMENT_BYTES(A) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A) (SQUASHFS_FRAGMENT_BYTES(A) % \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEXES(A) ((SQUASHFS_FRAGMENT_BYTES(A) + \ -+ SQUASHFS_METADATA_SIZE - 1) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_BYTES(A) (SQUASHFS_FRAGMENT_INDEXES(A) *\ -+ sizeof(long long)) -+ -+/* cached data constants for filesystem */ -+#define SQUASHFS_CACHED_BLKS 8 -+ -+#define SQUASHFS_MAX_FILE_SIZE_LOG 64 -+ -+#define SQUASHFS_MAX_FILE_SIZE ((long long) 1 << \ -+ (SQUASHFS_MAX_FILE_SIZE_LOG - 2)) -+ -+#define SQUASHFS_MARKER_BYTE 0xff -+ -+/* meta index cache */ -+#define SQUASHFS_META_INDEXES (SQUASHFS_METADATA_SIZE / sizeof(unsigned int)) -+#define SQUASHFS_META_ENTRIES 31 -+#define SQUASHFS_META_NUMBER 8 -+#define SQUASHFS_SLOTS 4 -+ -+struct meta_entry { -+ long long data_block; -+ unsigned int index_block; -+ unsigned short offset; -+ unsigned short pad; -+}; -+ -+struct meta_index { -+ unsigned int inode_number; -+ unsigned int offset; -+ unsigned short entries; -+ unsigned short skip; -+ unsigned short locked; -+ unsigned short pad; -+ struct meta_entry meta_entry[SQUASHFS_META_ENTRIES]; -+}; -+ -+ -+/* -+ * definitions for structures on disk -+ */ -+ -+typedef long long squashfs_block_t; -+typedef long long squashfs_inode_t; -+ -+struct squashfs_super_block { -+ unsigned int s_magic; -+ unsigned int inodes; -+ unsigned int bytes_used_2; -+ unsigned int uid_start_2; -+ unsigned int guid_start_2; -+ unsigned int inode_table_start_2; -+ unsigned int directory_table_start_2; -+ unsigned int s_major:16; -+ unsigned int s_minor:16; -+ unsigned int block_size_1:16; -+ unsigned int block_log:16; -+ unsigned int flags:8; -+ unsigned int no_uids:8; -+ unsigned int no_guids:8; -+ unsigned int mkfs_time /* time of filesystem creation */; -+ squashfs_inode_t root_inode; -+ unsigned int block_size; -+ unsigned int fragments; -+ unsigned int fragment_table_start_2; -+ long long bytes_used; -+ long long uid_start; -+ long long guid_start; -+ long long inode_table_start; -+ long long directory_table_start; -+ long long fragment_table_start; -+ long long unused; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_index { -+ unsigned int index; -+ unsigned int start_block; -+ unsigned char size; -+ unsigned char name[0]; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_BASE_INODE_HEADER \ -+ unsigned int inode_type:4; \ -+ unsigned int mode:12; \ -+ unsigned int uid:8; \ -+ unsigned int guid:8; \ -+ unsigned int mtime; \ -+ unsigned int inode_number; -+ -+struct squashfs_base_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ squashfs_block_t start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ unsigned int file_size; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_lreg_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ squashfs_block_t start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ long long file_size; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int start_block; -+ unsigned int parent_inode; -+} __attribute__ ((packed)); -+ -+struct squashfs_ldir_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned int file_size:27; -+ unsigned int offset:13; -+ unsigned int start_block; -+ unsigned int i_count:16; -+ unsigned int parent_inode; -+ struct squashfs_dir_index index[0]; -+} __attribute__ ((packed)); -+ -+union squashfs_inode_header { -+ struct squashfs_base_inode_header base; -+ struct squashfs_dev_inode_header dev; -+ struct squashfs_symlink_inode_header symlink; -+ struct squashfs_reg_inode_header reg; -+ struct squashfs_lreg_inode_header lreg; -+ struct squashfs_dir_inode_header dir; -+ struct squashfs_ldir_inode_header ldir; -+ struct squashfs_ipc_inode_header ipc; -+}; -+ -+struct squashfs_dir_entry { -+ unsigned int offset:13; -+ unsigned int type:3; -+ unsigned int size:8; -+ int inode_number:16; -+ char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_header { -+ unsigned int count:8; -+ unsigned int start_block; -+ unsigned int inode_number; -+} __attribute__ ((packed)); -+ -+struct squashfs_fragment_entry { -+ long long start_block; -+ unsigned int size; -+ unsigned int unused; -+} __attribute__ ((packed)); -+ -+extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen); -+extern int squashfs_uncompress_init(void); -+extern int squashfs_uncompress_exit(void); -+ -+/* -+ * macros to convert each packed bitfield structure from little endian to big -+ * endian and vice versa. These are needed when creating or using a filesystem -+ * on a machine with different byte ordering to the target architecture. -+ * -+ */ -+ -+#define SQUASHFS_SWAP_START \ -+ int bits;\ -+ int b_pos;\ -+ unsigned long long val;\ -+ unsigned char *s;\ -+ unsigned char *d; -+ -+#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_super_block));\ -+ SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->inodes, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->bytes_used_2, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->uid_start_2, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->guid_start_2, d, 128, 32);\ -+ SQUASHFS_SWAP((s)->inode_table_start_2, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->directory_table_start_2, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->s_major, d, 224, 16);\ -+ SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\ -+ SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\ -+ SQUASHFS_SWAP((s)->block_log, d, 272, 16);\ -+ SQUASHFS_SWAP((s)->flags, d, 288, 8);\ -+ SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\ -+ SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\ -+ SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\ -+ SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\ -+ SQUASHFS_SWAP((s)->block_size, d, 408, 32);\ -+ SQUASHFS_SWAP((s)->fragments, d, 440, 32);\ -+ SQUASHFS_SWAP((s)->fragment_table_start_2, d, 472, 32);\ -+ SQUASHFS_SWAP((s)->bytes_used, d, 504, 64);\ -+ SQUASHFS_SWAP((s)->uid_start, d, 568, 64);\ -+ SQUASHFS_SWAP((s)->guid_start, d, 632, 64);\ -+ SQUASHFS_SWAP((s)->inode_table_start, d, 696, 64);\ -+ SQUASHFS_SWAP((s)->directory_table_start, d, 760, 64);\ -+ SQUASHFS_SWAP((s)->fragment_table_start, d, 824, 64);\ -+ SQUASHFS_SWAP((s)->unused, d, 888, 64);\ -+} -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->guid, d, 24, 8);\ -+ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 64, 32); -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_ipc_inode_header))\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_dev_inode_header)); \ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->rdev, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_reg_inode_header));\ -+ SQUASHFS_SWAP((s)->start_block, d, 96, 64);\ -+ SQUASHFS_SWAP((s)->fragment, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 224, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LREG_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_lreg_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 128, 64);\ -+ SQUASHFS_SWAP((s)->fragment, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 224, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 256, 64);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_dir_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 128, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 147, 13);\ -+ SQUASHFS_SWAP((s)->start_block, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->parent_inode, d, 192, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LDIR_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_ldir_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 128, 27);\ -+ SQUASHFS_SWAP((s)->offset, d, 155, 13);\ -+ SQUASHFS_SWAP((s)->start_block, d, 168, 32);\ -+ SQUASHFS_SWAP((s)->i_count, d, 200, 16);\ -+ SQUASHFS_SWAP((s)->parent_inode, d, 216, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INDEX(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index));\ -+ SQUASHFS_SWAP((s)->index, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->size, d, 64, 8);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header));\ -+ SQUASHFS_SWAP((s)->count, d, 0, 8);\ -+ SQUASHFS_SWAP((s)->start_block, d, 8, 32);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 40, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry));\ -+ SQUASHFS_SWAP((s)->offset, d, 0, 13);\ -+ SQUASHFS_SWAP((s)->type, d, 13, 3);\ -+ SQUASHFS_SWAP((s)->size, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry));\ -+ SQUASHFS_SWAP((s)->start_block, d, 0, 64);\ -+ SQUASHFS_SWAP((s)->size, d, 64, 32);\ -+} -+ -+#define SQUASHFS_SWAP_SHORTS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 2);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 16)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 16);\ -+} -+ -+#define SQUASHFS_SWAP_INTS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 4);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 32)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LONG_LONGS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 8);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 64)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 64);\ -+} -+ -+#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * bits / 8);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ bits)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, bits);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n) -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+ -+struct squashfs_base_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int type:4; -+ unsigned int offset:4; -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int mtime; -+ unsigned int start_block; -+ unsigned int file_size:32; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n) \ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 4);\ -+ SQUASHFS_SWAP((s)->guid, d, 20, 4); -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_ipc_inode_header_1));\ -+ SQUASHFS_SWAP((s)->type, d, 24, 4);\ -+ SQUASHFS_SWAP((s)->offset, d, 28, 4);\ -+} -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_dev_inode_header_1));\ -+ SQUASHFS_SWAP((s)->rdev, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header_1));\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_reg_inode_header_1));\ -+ SQUASHFS_SWAP((s)->mtime, d, 24, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 56, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 88, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_dir_inode_header_1));\ -+ SQUASHFS_SWAP((s)->file_size, d, 24, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 43, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 56, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 88, 24);\ -+} -+ -+#endif -+ -+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+ -+struct squashfs_dir_index_2 { -+ unsigned int index:27; -+ unsigned int start_block:29; -+ unsigned char size; -+ unsigned char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_base_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int mtime; -+ unsigned int start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ unsigned int file_size:32; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+struct squashfs_ldir_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int file_size:27; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+ unsigned int i_count:16; -+ struct squashfs_dir_index_2 index[0]; -+} __attribute__ ((packed)); -+ -+union squashfs_inode_header_2 { -+ struct squashfs_base_inode_header_2 base; -+ struct squashfs_dev_inode_header_2 dev; -+ struct squashfs_symlink_inode_header_2 symlink; -+ struct squashfs_reg_inode_header_2 reg; -+ struct squashfs_dir_inode_header_2 dir; -+ struct squashfs_ldir_inode_header_2 ldir; -+ struct squashfs_ipc_inode_header_2 ipc; -+}; -+ -+struct squashfs_dir_header_2 { -+ unsigned int count:8; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_entry_2 { -+ unsigned int offset:13; -+ unsigned int type:3; -+ unsigned int size:8; -+ char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_fragment_entry_2 { -+ unsigned int start_block; -+ unsigned int size; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->guid, d, 24, 8);\ -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER_2(s, d) \ -+ SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, sizeof(struct squashfs_ipc_inode_header_2)) -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_dev_inode_header_2)); \ -+ SQUASHFS_SWAP((s)->rdev, d, 32, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header_2));\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_reg_inode_header_2));\ -+ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->fragment, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 128, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 160, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_dir_inode_header_2));\ -+ SQUASHFS_SWAP((s)->file_size, d, 32, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 51, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 96, 24);\ -+} -+ -+#define SQUASHFS_SWAP_LDIR_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_ldir_inode_header_2));\ -+ SQUASHFS_SWAP((s)->file_size, d, 32, 27);\ -+ SQUASHFS_SWAP((s)->offset, d, 59, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 72, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 104, 24);\ -+ SQUASHFS_SWAP((s)->i_count, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INDEX_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index_2));\ -+ SQUASHFS_SWAP((s)->index, d, 0, 27);\ -+ SQUASHFS_SWAP((s)->start_block, d, 27, 29);\ -+ SQUASHFS_SWAP((s)->size, d, 56, 8);\ -+} -+#define SQUASHFS_SWAP_DIR_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header_2));\ -+ SQUASHFS_SWAP((s)->count, d, 0, 8);\ -+ SQUASHFS_SWAP((s)->start_block, d, 8, 24);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_ENTRY_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry_2));\ -+ SQUASHFS_SWAP((s)->offset, d, 0, 13);\ -+ SQUASHFS_SWAP((s)->type, d, 13, 3);\ -+ SQUASHFS_SWAP((s)->size, d, 16, 8);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_ENTRY_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry_2));\ -+ SQUASHFS_SWAP((s)->start_block, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->size, d, 32, 32);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_INDEXES_2(s, d, n) SQUASHFS_SWAP_INTS(s, d, n) -+ -+/* fragment and fragment table defines */ -+#define SQUASHFS_FRAGMENT_BYTES_2(A) (A * sizeof(struct squashfs_fragment_entry_2)) -+ -+#define SQUASHFS_FRAGMENT_INDEX_2(A) (SQUASHFS_FRAGMENT_BYTES_2(A) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_OFFSET_2(A) (SQUASHFS_FRAGMENT_BYTES_2(A) % \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEXES_2(A) ((SQUASHFS_FRAGMENT_BYTES_2(A) + \ -+ SQUASHFS_METADATA_SIZE - 1) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_BYTES_2(A) (SQUASHFS_FRAGMENT_INDEXES_2(A) *\ -+ sizeof(int)) -+ -+#endif -+ -+#ifdef __KERNEL__ -+ -+/* -+ * macros used to swap each structure entry, taking into account -+ * bitfields and different bitfield placing conventions on differing -+ * architectures -+ */ -+ -+#include -+ -+#ifdef __BIG_ENDIAN -+ /* convert from little endian to big endian */ -+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \ -+ tbits, b_pos) -+#else -+ /* convert from big endian to little endian */ -+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \ -+ tbits, 64 - tbits - b_pos) -+#endif -+ -+#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\ -+ b_pos = pos % 8;\ -+ val = 0;\ -+ s = (unsigned char *)p + (pos / 8);\ -+ d = ((unsigned char *) &val) + 7;\ -+ for(bits = 0; bits < (tbits + b_pos); bits += 8) \ -+ *d-- = *s++;\ -+ value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\ -+} -+ -+#define SQUASHFS_MEMSET(s, d, n) memset(s, 0, n); -+ -+#endif -+#endif -Index: linux-2.6.22/include/linux/squashfs_fs_i.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/linux/squashfs_fs_i.h 2007-08-28 21:56:34.000000000 +0100 -@@ -0,0 +1,45 @@ -+#ifndef SQUASHFS_FS_I -+#define SQUASHFS_FS_I -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs_i.h -+ */ -+ -+struct squashfs_inode_info { -+ long long start_block; -+ unsigned int offset; -+ union { -+ struct { -+ long long fragment_start_block; -+ unsigned int fragment_size; -+ unsigned int fragment_offset; -+ long long block_list_start; -+ } s1; -+ struct { -+ long long directory_index_start; -+ unsigned int directory_index_offset; -+ unsigned int directory_index_count; -+ unsigned int parent_inode; -+ } s2; -+ } u; -+ struct inode vfs_inode; -+}; -+#endif -Index: linux-2.6.22/include/linux/squashfs_fs_sb.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/linux/squashfs_fs_sb.h 2007-08-28 21:56:34.000000000 +0100 -@@ -0,0 +1,74 @@ -+#ifndef SQUASHFS_FS_SB -+#define SQUASHFS_FS_SB -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs_sb.h -+ */ -+ -+#include -+ -+struct squashfs_cache { -+ long long block; -+ int length; -+ long long next_index; -+ char *data; -+}; -+ -+struct squashfs_fragment_cache { -+ long long block; -+ int length; -+ unsigned int locked; -+ char *data; -+}; -+ -+struct squashfs_sb_info { -+ struct squashfs_super_block sblk; -+ int devblksize; -+ int devblksize_log2; -+ int swap; -+ struct squashfs_cache *block_cache; -+ struct squashfs_fragment_cache *fragment; -+ int next_cache; -+ int next_fragment; -+ int next_meta_index; -+ unsigned int *uid; -+ unsigned int *guid; -+ long long *fragment_index; -+ unsigned int *fragment_index_2; -+ unsigned int read_size; -+ char *read_data; -+ char *read_page; -+ struct semaphore read_data_mutex; -+ struct semaphore read_page_mutex; -+ struct semaphore block_cache_mutex; -+ struct semaphore fragment_mutex; -+ struct semaphore meta_index_mutex; -+ wait_queue_head_t waitq; -+ wait_queue_head_t fragment_wait_queue; -+ struct meta_index *meta_index; -+ struct inode *(*iget)(struct super_block *s, squashfs_inode_t \ -+ inode); -+ long long (*read_blocklist)(struct inode *inode, int \ -+ index, int readahead_blks, char *block_list, \ -+ unsigned short **block_p, unsigned int *bsize); -+ int (*read_fragment_index_table)(struct super_block *s); -+}; -+#endif -Index: linux-2.6.22/init/do_mounts_rd.c -=================================================================== ---- linux-2.6.22.orig/init/do_mounts_rd.c 2007-08-28 21:54:14.000000000 +0100 -+++ linux-2.6.22/init/do_mounts_rd.c 2007-08-28 21:56:34.000000000 +0100 -@@ -5,6 +5,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -39,6 +40,7 @@ static int __init crd_load(int in_fd, in - * numbers could not be found. - * - * We currently check for the following magic numbers: -+ * squashfs - * minix - * ext2 - * romfs -@@ -53,6 +55,7 @@ identify_ramdisk_image(int fd, int start - struct ext2_super_block *ext2sb; - struct romfs_super_block *romfsb; - struct cramfs_super *cramfsb; -+ struct squashfs_super_block *squashfsb; - int nblocks = -1; - unsigned char *buf; - -@@ -64,6 +67,7 @@ identify_ramdisk_image(int fd, int start - ext2sb = (struct ext2_super_block *) buf; - romfsb = (struct romfs_super_block *) buf; - cramfsb = (struct cramfs_super *) buf; -+ squashfsb = (struct squashfs_super_block *) buf; - memset(buf, 0xe5, size); - - /* -@@ -101,6 +105,15 @@ identify_ramdisk_image(int fd, int start - goto done; - } - -+ /* squashfs is at block zero too */ -+ if (squashfsb->s_magic == SQUASHFS_MAGIC) { -+ printk(KERN_NOTICE -+ "RAMDISK: squashfs filesystem found at block %d\n", -+ start_block); -+ nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS; -+ goto done; -+ } -+ - /* - * Read block 1 to test for minix and ext2 superblock - */ diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/squashfs3.2-2.6.20-r0.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/squashfs3.2-2.6.20-r0.patch deleted file mode 100644 index 3870b317e4..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/squashfs3.2-2.6.20-r0.patch +++ /dev/null @@ -1,4376 +0,0 @@ ---- linux-2.6.24-rc1.orig/fs/Kconfig -+++ linux-2.6.24-rc1/fs/Kconfig -@@ -1405,6 +1405,71 @@ - - If unsure, say N. - -+config SQUASHFS -+ tristate "SquashFS 3.2 - Squashed file system support" -+ select ZLIB_INFLATE -+ help -+ Saying Y here includes support for SquashFS 3.2 (a Compressed Read-Only File -+ System). Squashfs is a highly compressed read-only filesystem for Linux. -+ It uses zlib compression to compress both files, inodes and directories. -+ Inodes in the system are very small and all blocks are packed to minimise -+ data overhead. Block sizes greater than 4K are supported up to a maximum of 64K. -+ SquashFS 3.1 supports 64 bit filesystems and files (larger than 4GB), full -+ uid/gid information, hard links and timestamps. -+ -+ Squashfs is intended for general read-only filesystem use, for archival -+ use (i.e. in cases where a .tar.gz file may be used), and in embedded -+ systems where low overhead is needed. Further information and filesystem tools -+ are available from http://squashfs.sourceforge.net. -+ -+ If you want to compile this as a module ( = code which can be -+ inserted in and removed from the running kernel whenever you want), -+ say M here and read . The module -+ will be called squashfs. Note that the root file system (the one -+ containing the directory /) cannot be compiled as a module. -+ -+ If unsure, say N. -+ -+config SQUASHFS_EMBEDDED -+ -+ bool "Additional options for memory-constrained systems" -+ depends on SQUASHFS -+ default n -+ help -+ Saying Y here allows you to specify cache sizes and how Squashfs -+ allocates memory. This is only intended for memory constrained -+ systems. -+ -+ If unsure, say N. -+ -+config SQUASHFS_FRAGMENT_CACHE_SIZE -+ int "Number of fragments cached" if SQUASHFS_EMBEDDED -+ depends on SQUASHFS -+ default "3" -+ help -+ By default SquashFS caches the last 3 fragments read from -+ the filesystem. Increasing this amount may mean SquashFS -+ has to re-read fragments less often from disk, at the expense -+ of extra system memory. Decreasing this amount will mean -+ SquashFS uses less memory at the expense of extra reads from disk. -+ -+ Note there must be at least one cached fragment. Anything -+ much more than three will probably not make much difference. -+ -+config SQUASHFS_VMALLOC -+ bool "Use Vmalloc rather than Kmalloc" if SQUASHFS_EMBEDDED -+ depends on SQUASHFS -+ default n -+ help -+ By default SquashFS uses kmalloc to obtain fragment cache memory. -+ Kmalloc memory is the standard kernel allocator, but it can fail -+ on memory constrained systems. Because of the way Vmalloc works, -+ Vmalloc can succeed when kmalloc fails. Specifying this option -+ will make SquashFS always use Vmalloc to allocate the -+ fragment cache memory. -+ -+ If unsure, say N. -+ - config VXFS_FS - tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" - depends on BLOCK ---- linux-2.6.24-rc1.orig/fs/Makefile -+++ linux-2.6.24-rc1/fs/Makefile -@@ -72,6 +72,7 @@ - obj-$(CONFIG_JBD2) += jbd2/ - obj-$(CONFIG_EXT2_FS) += ext2/ - obj-$(CONFIG_CRAMFS) += cramfs/ -+obj-$(CONFIG_SQUASHFS) += squashfs/ - obj-y += ramfs/ - obj-$(CONFIG_HUGETLBFS) += hugetlbfs/ - obj-$(CONFIG_CODA_FS) += coda/ ---- /dev/null -+++ linux-2.6.24-rc1/fs/squashfs/inode.c -@@ -0,0 +1,2329 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * inode.c -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "squashfs.h" -+ -+static void vfs_read_inode(struct inode *i); -+static struct dentry *squashfs_get_parent(struct dentry *child); -+static int squashfs_read_inode(struct inode *i, squashfs_inode_t inode); -+static int squashfs_statfs(struct dentry *, struct kstatfs *); -+static int squashfs_symlink_readpage(struct file *file, struct page *page); -+static long long read_blocklist(struct inode *inode, int index, -+ int readahead_blks, char *block_list, -+ unsigned short **block_p, unsigned int *bsize); -+static int squashfs_readpage(struct file *file, struct page *page); -+static int squashfs_readpage4K(struct file *file, struct page *page); -+static int squashfs_readdir(struct file *, void *, filldir_t); -+static struct dentry *squashfs_lookup(struct inode *, struct dentry *, -+ struct nameidata *); -+static int squashfs_remount(struct super_block *s, int *flags, char *data); -+static void squashfs_put_super(struct super_block *); -+static int squashfs_get_sb(struct file_system_type *,int, const char *, void *, -+ struct vfsmount *); -+static struct inode *squashfs_alloc_inode(struct super_block *sb); -+static void squashfs_destroy_inode(struct inode *inode); -+static int init_inodecache(void); -+static void destroy_inodecache(void); -+ -+static struct file_system_type squashfs_fs_type = { -+ .owner = THIS_MODULE, -+ .name = "squashfs", -+ .get_sb = squashfs_get_sb, -+ .kill_sb = kill_block_super, -+ .fs_flags = FS_REQUIRES_DEV -+}; -+ -+static const unsigned char squashfs_filetype_table[] = { -+ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK -+}; -+ -+static struct super_operations squashfs_super_ops = { -+ .alloc_inode = squashfs_alloc_inode, -+ .destroy_inode = squashfs_destroy_inode, -+ .statfs = squashfs_statfs, -+ .put_super = squashfs_put_super, -+ .remount_fs = squashfs_remount -+}; -+ -+static struct super_operations squashfs_export_super_ops = { -+ .alloc_inode = squashfs_alloc_inode, -+ .destroy_inode = squashfs_destroy_inode, -+ .statfs = squashfs_statfs, -+ .put_super = squashfs_put_super, -+ .read_inode = vfs_read_inode -+}; -+ -+static struct export_operations squashfs_export_ops = { -+ .get_parent = squashfs_get_parent -+}; -+ -+SQSH_EXTERN const struct address_space_operations squashfs_symlink_aops = { -+ .readpage = squashfs_symlink_readpage -+}; -+ -+SQSH_EXTERN const struct address_space_operations squashfs_aops = { -+ .readpage = squashfs_readpage -+}; -+ -+SQSH_EXTERN const struct address_space_operations squashfs_aops_4K = { -+ .readpage = squashfs_readpage4K -+}; -+ -+static const struct file_operations squashfs_dir_ops = { -+ .read = generic_read_dir, -+ .readdir = squashfs_readdir -+}; -+ -+SQSH_EXTERN struct inode_operations squashfs_dir_inode_ops = { -+ .lookup = squashfs_lookup -+}; -+ -+ -+static struct buffer_head *get_block_length(struct super_block *s, -+ int *cur_index, int *offset, int *c_byte) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ unsigned short temp; -+ struct buffer_head *bh; -+ -+ if (!(bh = sb_bread(s, *cur_index))) -+ goto out; -+ -+ if (msblk->devblksize - *offset == 1) { -+ if (msblk->swap) -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ else -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ brelse(bh); -+ if (!(bh = sb_bread(s, ++(*cur_index)))) -+ goto out; -+ if (msblk->swap) -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ bh->b_data); -+ else -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ bh->b_data); -+ *c_byte = temp; -+ *offset = 1; -+ } else { -+ if (msblk->swap) { -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset + 1)); -+ } else { -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset + 1)); -+ } -+ *c_byte = temp; -+ *offset += 2; -+ } -+ -+ if (SQUASHFS_CHECK_DATA(msblk->sblk.flags)) { -+ if (*offset == msblk->devblksize) { -+ brelse(bh); -+ if (!(bh = sb_bread(s, ++(*cur_index)))) -+ goto out; -+ *offset = 0; -+ } -+ if (*((unsigned char *) (bh->b_data + *offset)) != -+ SQUASHFS_MARKER_BYTE) { -+ ERROR("Metadata block marker corrupt @ %x\n", -+ *cur_index); -+ brelse(bh); -+ goto out; -+ } -+ (*offset)++; -+ } -+ return bh; -+ -+out: -+ return NULL; -+} -+ -+ -+SQSH_EXTERN unsigned int squashfs_read_data(struct super_block *s, char *buffer, -+ long long index, unsigned int length, -+ long long *next_index, int srclength) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ struct buffer_head *bh[((SQUASHFS_FILE_MAX_SIZE - 1) >> -+ msblk->devblksize_log2) + 2]; -+ unsigned int offset = index & ((1 << msblk->devblksize_log2) - 1); -+ unsigned int cur_index = index >> msblk->devblksize_log2; -+ int bytes, avail_bytes, b = 0, k = 0; -+ unsigned int compressed; -+ unsigned int c_byte = length; -+ -+ if (c_byte) { -+ bytes = msblk->devblksize - offset; -+ compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte); -+ c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte); -+ -+ TRACE("Block @ 0x%llx, %scompressed size %d, src size %d\n", index, compressed -+ ? "" : "un", (unsigned int) c_byte, srclength); -+ -+ if (c_byte > srclength || index < 0 || (index + c_byte) > sblk->bytes_used) -+ goto read_failure; -+ -+ if (!(bh[0] = sb_getblk(s, cur_index))) -+ goto block_release; -+ -+ for (b = 1; bytes < c_byte; b++) { -+ if (!(bh[b] = sb_getblk(s, ++cur_index))) -+ goto block_release; -+ bytes += msblk->devblksize; -+ } -+ ll_rw_block(READ, b, bh); -+ } else { -+ if (index < 0 || (index + 2) > sblk->bytes_used) -+ goto read_failure; -+ -+ if (!(bh[0] = get_block_length(s, &cur_index, &offset, -+ &c_byte))) -+ goto read_failure; -+ -+ bytes = msblk->devblksize - offset; -+ compressed = SQUASHFS_COMPRESSED(c_byte); -+ c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte); -+ -+ TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed -+ ? "" : "un", (unsigned int) c_byte); -+ -+ if (c_byte > srclength || (index + c_byte) > sblk->bytes_used) -+ goto read_failure; -+ -+ for (b = 1; bytes < c_byte; b++) { -+ if (!(bh[b] = sb_getblk(s, ++cur_index))) -+ goto block_release; -+ bytes += msblk->devblksize; -+ } -+ ll_rw_block(READ, b - 1, bh + 1); -+ } -+ -+ if (compressed) { -+ int zlib_err = 0; -+ -+ /* -+ * uncompress block -+ */ -+ -+ mutex_lock(&msblk->read_data_mutex); -+ -+ msblk->stream.next_out = buffer; -+ msblk->stream.avail_out = srclength; -+ -+ for (bytes = 0; k < b; k++) { -+ avail_bytes = (c_byte - bytes) > (msblk->devblksize - offset) ? -+ msblk->devblksize - offset : -+ c_byte - bytes; -+ wait_on_buffer(bh[k]); -+ if (!buffer_uptodate(bh[k])) -+ goto release_mutex; -+ -+ msblk->stream.next_in = bh[k]->b_data + offset; -+ msblk->stream.avail_in = avail_bytes; -+ -+ if (k == 0) { -+ zlib_err = zlib_inflateInit(&msblk->stream); -+ if (zlib_err != Z_OK) { -+ ERROR("zlib_inflateInit returned unexpected result 0x%x, srclength %d\n", -+ zlib_err, srclength); -+ goto release_mutex; -+ } -+ -+ if (avail_bytes == 0) { -+ offset = 0; -+ brelse(bh[k]); -+ continue; -+ } -+ } -+ -+ zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH); -+ if (zlib_err != Z_OK && zlib_err != Z_STREAM_END) { -+ ERROR("zlib_inflate returned unexpected result 0x%x, srclength %d, avail_in %d, avail_out %d\n", -+ zlib_err, srclength, msblk->stream.avail_in, msblk->stream.avail_out); -+ goto release_mutex; -+ } -+ -+ bytes += avail_bytes; -+ offset = 0; -+ brelse(bh[k]); -+ } -+ -+ if (zlib_err != Z_STREAM_END) -+ goto release_mutex; -+ -+ zlib_err = zlib_inflateEnd(&msblk->stream); -+ if (zlib_err != Z_OK) { -+ ERROR("zlib_inflateEnd returned unexpected result 0x%x, srclength %d\n", -+ zlib_err, srclength); -+ goto release_mutex; -+ } -+ bytes = msblk->stream.total_out; -+ mutex_unlock(&msblk->read_data_mutex); -+ } else { -+ int i; -+ -+ for(i = 0; i < b; i++) { -+ wait_on_buffer(bh[i]); -+ if(!buffer_uptodate(bh[i])) -+ goto block_release; -+ } -+ -+ for (bytes = 0; k < b; k++) { -+ avail_bytes = (c_byte - bytes) > (msblk->devblksize - offset) ? -+ msblk->devblksize - offset : -+ c_byte - bytes; -+ memcpy(buffer + bytes, bh[k]->b_data + offset, avail_bytes); -+ bytes += avail_bytes; -+ offset = 0; -+ brelse(bh[k]); -+ } -+ } -+ -+ if (next_index) -+ *next_index = index + c_byte + (length ? 0 : -+ (SQUASHFS_CHECK_DATA(msblk->sblk.flags) -+ ? 3 : 2)); -+ return bytes; -+ -+release_mutex: -+ mutex_unlock(&msblk->read_data_mutex); -+ -+block_release: -+ for (; k < b; k++) -+ brelse(bh[k]); -+ -+read_failure: -+ ERROR("sb_bread failed reading block 0x%x\n", cur_index); -+ return 0; -+} -+ -+ -+SQSH_EXTERN int squashfs_get_cached_block(struct super_block *s, char *buffer, -+ long long block, unsigned int offset, -+ int length, long long *next_block, -+ unsigned int *next_offset) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ int n, i, bytes, return_length = length; -+ long long next_index; -+ -+ TRACE("Entered squashfs_get_cached_block [%llx:%x]\n", block, offset); -+ -+ while ( 1 ) { -+ for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) -+ if (msblk->block_cache[i].block == block) -+ break; -+ -+ mutex_lock(&msblk->block_cache_mutex); -+ -+ if (i == SQUASHFS_CACHED_BLKS) { -+ /* read inode header block */ -+ for (i = msblk->next_cache, n = SQUASHFS_CACHED_BLKS; -+ n ; n --, i = (i + 1) % -+ SQUASHFS_CACHED_BLKS) -+ if (msblk->block_cache[i].block != -+ SQUASHFS_USED_BLK) -+ break; -+ -+ if (n == 0) { -+ wait_queue_t wait; -+ -+ init_waitqueue_entry(&wait, current); -+ add_wait_queue(&msblk->waitq, &wait); -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ mutex_unlock(&msblk->block_cache_mutex); -+ schedule(); -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&msblk->waitq, &wait); -+ continue; -+ } -+ msblk->next_cache = (i + 1) % SQUASHFS_CACHED_BLKS; -+ -+ if (msblk->block_cache[i].block == -+ SQUASHFS_INVALID_BLK) { -+ if (!(msblk->block_cache[i].data = -+ kmalloc(SQUASHFS_METADATA_SIZE, -+ GFP_KERNEL))) { -+ ERROR("Failed to allocate cache" -+ "block\n"); -+ mutex_unlock(&msblk->block_cache_mutex); -+ goto out; -+ } -+ } -+ -+ msblk->block_cache[i].block = SQUASHFS_USED_BLK; -+ mutex_unlock(&msblk->block_cache_mutex); -+ -+ msblk->block_cache[i].length = squashfs_read_data(s, -+ msblk->block_cache[i].data, block, 0, &next_index, SQUASHFS_METADATA_SIZE); -+ if (msblk->block_cache[i].length == 0) { -+ ERROR("Unable to read cache block [%llx:%x]\n", -+ block, offset); -+ mutex_lock(&msblk->block_cache_mutex); -+ msblk->block_cache[i].block = SQUASHFS_INVALID_BLK; -+ kfree(msblk->block_cache[i].data); -+ wake_up(&msblk->waitq); -+ mutex_unlock(&msblk->block_cache_mutex); -+ goto out; -+ } -+ -+ mutex_lock(&msblk->block_cache_mutex); -+ wake_up(&msblk->waitq); -+ msblk->block_cache[i].block = block; -+ msblk->block_cache[i].next_index = next_index; -+ TRACE("Read cache block [%llx:%x]\n", block, offset); -+ } -+ -+ if (msblk->block_cache[i].block != block) { -+ mutex_unlock(&msblk->block_cache_mutex); -+ continue; -+ } -+ -+ bytes = msblk->block_cache[i].length - offset; -+ -+ if (bytes < 1) { -+ mutex_unlock(&msblk->block_cache_mutex); -+ goto out; -+ } else if (bytes >= length) { -+ if (buffer) -+ memcpy(buffer, msblk->block_cache[i].data + -+ offset, length); -+ if (msblk->block_cache[i].length - offset == length) { -+ *next_block = msblk->block_cache[i].next_index; -+ *next_offset = 0; -+ } else { -+ *next_block = block; -+ *next_offset = offset + length; -+ } -+ mutex_unlock(&msblk->block_cache_mutex); -+ goto finish; -+ } else { -+ if (buffer) { -+ memcpy(buffer, msblk->block_cache[i].data + -+ offset, bytes); -+ buffer += bytes; -+ } -+ block = msblk->block_cache[i].next_index; -+ mutex_unlock(&msblk->block_cache_mutex); -+ length -= bytes; -+ offset = 0; -+ } -+ } -+ -+finish: -+ return return_length; -+out: -+ return 0; -+} -+ -+ -+static int get_fragment_location(struct super_block *s, unsigned int fragment, -+ long long *fragment_start_block, -+ unsigned int *fragment_size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ long long start_block = -+ msblk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)]; -+ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment); -+ struct squashfs_fragment_entry fragment_entry; -+ -+ if (msblk->swap) { -+ struct squashfs_fragment_entry sfragment_entry; -+ -+ if (!squashfs_get_cached_block(s, (char *) &sfragment_entry, -+ start_block, offset, -+ sizeof(sfragment_entry), &start_block, -+ &offset)) -+ goto out; -+ SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) &fragment_entry, -+ start_block, offset, -+ sizeof(fragment_entry), &start_block, -+ &offset)) -+ goto out; -+ -+ *fragment_start_block = fragment_entry.start_block; -+ *fragment_size = fragment_entry.size; -+ -+ return 1; -+ -+out: -+ return 0; -+} -+ -+ -+SQSH_EXTERN void release_cached_fragment(struct squashfs_sb_info *msblk, struct -+ squashfs_fragment_cache *fragment) -+{ -+ mutex_lock(&msblk->fragment_mutex); -+ fragment->locked --; -+ wake_up(&msblk->fragment_wait_queue); -+ mutex_unlock(&msblk->fragment_mutex); -+} -+ -+ -+SQSH_EXTERN struct squashfs_fragment_cache *get_cached_fragment(struct super_block -+ *s, long long start_block, -+ int length) -+{ -+ int i, n; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ while ( 1 ) { -+ mutex_lock(&msblk->fragment_mutex); -+ -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS && -+ msblk->fragment[i].block != start_block; i++); -+ -+ if (i == SQUASHFS_CACHED_FRAGMENTS) { -+ for (i = msblk->next_fragment, n = -+ SQUASHFS_CACHED_FRAGMENTS; n && -+ msblk->fragment[i].locked; n--, i = (i + 1) % -+ SQUASHFS_CACHED_FRAGMENTS); -+ -+ if (n == 0) { -+ wait_queue_t wait; -+ -+ init_waitqueue_entry(&wait, current); -+ add_wait_queue(&msblk->fragment_wait_queue, -+ &wait); -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ mutex_unlock(&msblk->fragment_mutex); -+ schedule(); -+ set_current_state(TASK_RUNNING); -+ remove_wait_queue(&msblk->fragment_wait_queue, -+ &wait); -+ continue; -+ } -+ msblk->next_fragment = (msblk->next_fragment + 1) % -+ SQUASHFS_CACHED_FRAGMENTS; -+ -+ if (msblk->fragment[i].data == NULL) -+ if (!(msblk->fragment[i].data = SQUASHFS_ALLOC -+ (SQUASHFS_FILE_MAX_SIZE))) { -+ ERROR("Failed to allocate fragment " -+ "cache block\n"); -+ mutex_unlock(&msblk->fragment_mutex); -+ goto out; -+ } -+ -+ msblk->fragment[i].block = SQUASHFS_INVALID_BLK; -+ msblk->fragment[i].locked = 1; -+ mutex_unlock(&msblk->fragment_mutex); -+ -+ if (!(msblk->fragment[i].length = squashfs_read_data(s, -+ msblk->fragment[i].data, -+ start_block, length, NULL, sblk->block_size))) { -+ ERROR("Unable to read fragment cache block " -+ "[%llx]\n", start_block); -+ msblk->fragment[i].locked = 0; -+ smp_mb(); -+ goto out; -+ } -+ -+ mutex_lock(&msblk->fragment_mutex); -+ msblk->fragment[i].block = start_block; -+ TRACE("New fragment %d, start block %lld, locked %d\n", -+ i, msblk->fragment[i].block, -+ msblk->fragment[i].locked); -+ mutex_unlock(&msblk->fragment_mutex); -+ break; -+ } -+ -+ msblk->fragment[i].locked++; -+ mutex_unlock(&msblk->fragment_mutex); -+ TRACE("Got fragment %d, start block %lld, locked %d\n", i, -+ msblk->fragment[i].block, -+ msblk->fragment[i].locked); -+ break; -+ } -+ -+ return &msblk->fragment[i]; -+ -+out: -+ return NULL; -+} -+ -+ -+static void squashfs_new_inode(struct squashfs_sb_info *msblk, struct inode *i, -+ struct squashfs_base_inode_header *inodeb) -+{ -+ i->i_ino = inodeb->inode_number; -+ i->i_mtime.tv_sec = inodeb->mtime; -+ i->i_atime.tv_sec = inodeb->mtime; -+ i->i_ctime.tv_sec = inodeb->mtime; -+ i->i_uid = msblk->uid[inodeb->uid]; -+ i->i_mode = inodeb->mode; -+ i->i_size = 0; -+ if (inodeb->guid == SQUASHFS_GUIDS) -+ i->i_gid = i->i_uid; -+ else -+ i->i_gid = msblk->guid[inodeb->guid]; -+} -+ -+ -+static squashfs_inode_t squashfs_inode_lookup(struct super_block *s, int ino) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ long long start = msblk->inode_lookup_table[SQUASHFS_LOOKUP_BLOCK(ino - 1)]; -+ int offset = SQUASHFS_LOOKUP_BLOCK_OFFSET(ino - 1); -+ squashfs_inode_t inode; -+ -+ TRACE("Entered squashfs_inode_lookup, inode_number = %d\n", ino); -+ -+ if (msblk->swap) { -+ squashfs_inode_t sinode; -+ -+ if (!squashfs_get_cached_block(s, (char *) &sinode, start, offset, -+ sizeof(sinode), &start, &offset)) -+ goto out; -+ SQUASHFS_SWAP_INODE_T((&inode), &sinode); -+ } else if (!squashfs_get_cached_block(s, (char *) &inode, start, offset, -+ sizeof(inode), &start, &offset)) -+ goto out; -+ -+ TRACE("squashfs_inode_lookup, inode = 0x%llx\n", inode); -+ -+ return inode; -+ -+out: -+ return SQUASHFS_INVALID_BLK; -+} -+ -+ -+static void vfs_read_inode(struct inode *i) -+{ -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ squashfs_inode_t inode = squashfs_inode_lookup(i->i_sb, i->i_ino); -+ -+ TRACE("Entered vfs_read_inode\n"); -+ -+ if(inode != SQUASHFS_INVALID_BLK) -+ (msblk->read_inode)(i, inode); -+} -+ -+ -+static struct dentry *squashfs_get_parent(struct dentry *child) -+{ -+ struct inode *i = child->d_inode; -+ struct inode *parent = iget(i->i_sb, SQUASHFS_I(i)->u.s2.parent_inode); -+ struct dentry *rv; -+ -+ TRACE("Entered squashfs_get_parent\n"); -+ -+ if(parent == NULL) { -+ rv = ERR_PTR(-EACCES); -+ goto out; -+ } -+ -+ rv = d_alloc_anon(parent); -+ if(rv == NULL) -+ rv = ERR_PTR(-ENOMEM); -+ -+out: -+ return rv; -+} -+ -+ -+SQSH_EXTERN struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode, unsigned int inode_number) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct inode *i = iget_locked(s, inode_number); -+ -+ TRACE("Entered squashfs_iget\n"); -+ -+ if(i && (i->i_state & I_NEW)) { -+ (msblk->read_inode)(i, inode); -+ unlock_new_inode(i); -+ } -+ -+ return i; -+} -+ -+ -+static int squashfs_read_inode(struct inode *i, squashfs_inode_t inode) -+{ -+ struct super_block *s = i->i_sb; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long block = SQUASHFS_INODE_BLK(inode) + -+ sblk->inode_table_start; -+ unsigned int offset = SQUASHFS_INODE_OFFSET(inode); -+ long long next_block; -+ unsigned int next_offset; -+ union squashfs_inode_header id, sid; -+ struct squashfs_base_inode_header *inodeb = &id.base, -+ *sinodeb = &sid.base; -+ -+ TRACE("Entered squashfs_read_inode\n"); -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) sinodeb, block, -+ offset, sizeof(*sinodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_BASE_INODE_HEADER(inodeb, sinodeb, -+ sizeof(*sinodeb)); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) inodeb, block, -+ offset, sizeof(*inodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ squashfs_new_inode(msblk, i, inodeb); -+ -+ switch(inodeb->inode_type) { -+ case SQUASHFS_FILE_TYPE: { -+ unsigned int frag_size; -+ long long frag_blk; -+ struct squashfs_reg_inode_header *inodep = &id.reg; -+ struct squashfs_reg_inode_header *sinodep = &sid.reg; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_REG_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG && -+ !get_fragment_location(s, -+ inodep->fragment, &frag_blk, &frag_size)) -+ goto failed_read; -+ -+ i->i_nlink = 1; -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ if (sblk->block_size > 4096) -+ i->i_data.a_ops = &squashfs_aops; -+ else -+ i->i_data.a_ops = &squashfs_aops_4K; -+ -+ TRACE("File inode %x:%x, start_block %llx, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_LREG_TYPE: { -+ unsigned int frag_size; -+ long long frag_blk; -+ struct squashfs_lreg_inode_header *inodep = &id.lreg; -+ struct squashfs_lreg_inode_header *sinodep = &sid.lreg; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LREG_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG && -+ !get_fragment_location(s, -+ inodep->fragment, &frag_blk, &frag_size)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ if (sblk->block_size > 4096) -+ i->i_data.a_ops = &squashfs_aops; -+ else -+ i->i_data.a_ops = &squashfs_aops_4K; -+ -+ TRACE("File inode %x:%x, start_block %llx, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_DIR_TYPE: { -+ struct squashfs_dir_inode_header *inodep = &id.dir; -+ struct squashfs_dir_inode_header *sinodep = &sid.dir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DIR_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops; -+ i->i_fop = &squashfs_dir_ops; -+ i->i_mode |= S_IFDIR; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = 0; -+ SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode; -+ -+ TRACE("Directory inode %x:%x, start_block %x, offset " -+ "%x\n", SQUASHFS_INODE_BLK(inode), -+ offset, inodep->start_block, -+ inodep->offset); -+ break; -+ } -+ case SQUASHFS_LDIR_TYPE: { -+ struct squashfs_ldir_inode_header *inodep = &id.ldir; -+ struct squashfs_ldir_inode_header *sinodep = &sid.ldir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LDIR_INODE_HEADER(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops; -+ i->i_fop = &squashfs_dir_ops; -+ i->i_mode |= S_IFDIR; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_start = next_block; -+ SQUASHFS_I(i)->u.s2.directory_index_offset = -+ next_offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = -+ inodep->i_count; -+ SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode; -+ -+ TRACE("Long directory inode %x:%x, start_block %x, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, inodep->offset); -+ break; -+ } -+ case SQUASHFS_SYMLINK_TYPE: { -+ struct squashfs_symlink_inode_header *inodep = -+ &id.symlink; -+ struct squashfs_symlink_inode_header *sinodep = -+ &sid.symlink; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_SYMLINK_INODE_HEADER(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->symlink_size; -+ i->i_op = &page_symlink_inode_operations; -+ i->i_data.a_ops = &squashfs_symlink_aops; -+ i->i_mode |= S_IFLNK; -+ SQUASHFS_I(i)->start_block = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ -+ TRACE("Symbolic link inode %x:%x, start_block %llx, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ next_block, next_offset); -+ break; -+ } -+ case SQUASHFS_BLKDEV_TYPE: -+ case SQUASHFS_CHRDEV_TYPE: { -+ struct squashfs_dev_inode_header *inodep = &id.dev; -+ struct squashfs_dev_inode_header *sinodep = &sid.dev; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DEV_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_mode |= (inodeb->inode_type == -+ SQUASHFS_CHRDEV_TYPE) ? S_IFCHR : -+ S_IFBLK; -+ init_special_inode(i, i->i_mode, -+ old_decode_dev(inodep->rdev)); -+ -+ TRACE("Device inode %x:%x, rdev %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->rdev); -+ break; -+ } -+ case SQUASHFS_FIFO_TYPE: -+ case SQUASHFS_SOCKET_TYPE: { -+ struct squashfs_ipc_inode_header *inodep = &id.ipc; -+ struct squashfs_ipc_inode_header *sinodep = &sid.ipc; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_IPC_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE) -+ ? S_IFIFO : S_IFSOCK; -+ init_special_inode(i, i->i_mode, 0); -+ break; -+ } -+ default: -+ ERROR("Unknown inode type %d in squashfs_iget!\n", -+ inodeb->inode_type); -+ goto failed_read1; -+ } -+ -+ return 1; -+ -+failed_read: -+ ERROR("Unable to read inode [%llx:%x]\n", block, offset); -+ -+failed_read1: -+ make_bad_inode(i); -+ return 0; -+} -+ -+ -+static int read_inode_lookup_table(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned int length = SQUASHFS_LOOKUP_BLOCK_BYTES(sblk->inodes); -+ -+ TRACE("In read_inode_lookup_table, length %d\n", length); -+ -+ /* Allocate inode lookup table */ -+ if (!(msblk->inode_lookup_table = kmalloc(length, GFP_KERNEL))) { -+ ERROR("Failed to allocate inode lookup table\n"); -+ return 0; -+ } -+ -+ if (!squashfs_read_data(s, (char *) msblk->inode_lookup_table, -+ sblk->lookup_table_start, length | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length)) { -+ ERROR("unable to read inode lookup table\n"); -+ return 0; -+ } -+ -+ if (msblk->swap) { -+ int i; -+ long long block; -+ -+ for (i = 0; i < SQUASHFS_LOOKUP_BLOCKS(sblk->inodes); i++) { -+ SQUASHFS_SWAP_LOOKUP_BLOCKS((&block), -+ &msblk->inode_lookup_table[i], 1); -+ msblk->inode_lookup_table[i] = block; -+ } -+ } -+ -+ return 1; -+} -+ -+ -+static int read_fragment_index_table(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned int length = SQUASHFS_FRAGMENT_INDEX_BYTES(sblk->fragments); -+ -+ if(length == 0) -+ return 1; -+ -+ /* Allocate fragment index table */ -+ if (!(msblk->fragment_index = kmalloc(length, GFP_KERNEL))) { -+ ERROR("Failed to allocate fragment index table\n"); -+ return 0; -+ } -+ -+ if (!squashfs_read_data(s, (char *) msblk->fragment_index, -+ sblk->fragment_table_start, length | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length)) { -+ ERROR("unable to read fragment index table\n"); -+ return 0; -+ } -+ -+ if (msblk->swap) { -+ int i; -+ long long fragment; -+ -+ for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sblk->fragments); i++) { -+ SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment), -+ &msblk->fragment_index[i], 1); -+ msblk->fragment_index[i] = fragment; -+ } -+ } -+ -+ return 1; -+} -+ -+ -+static int supported_squashfs_filesystem(struct squashfs_sb_info *msblk, int silent) -+{ -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ msblk->read_inode = squashfs_read_inode; -+ msblk->read_blocklist = read_blocklist; -+ msblk->read_fragment_index_table = read_fragment_index_table; -+ -+ if (sblk->s_major == 1) { -+ if (!squashfs_1_0_supported(msblk)) { -+ SERROR("Major/Minor mismatch, Squashfs 1.0 filesystems " -+ "are unsupported\n"); -+ SERROR("Please recompile with " -+ "Squashfs 1.0 support enabled\n"); -+ return 0; -+ } -+ } else if (sblk->s_major == 2) { -+ if (!squashfs_2_0_supported(msblk)) { -+ SERROR("Major/Minor mismatch, Squashfs 2.0 filesystems " -+ "are unsupported\n"); -+ SERROR("Please recompile with " -+ "Squashfs 2.0 support enabled\n"); -+ return 0; -+ } -+ } else if(sblk->s_major != SQUASHFS_MAJOR || sblk->s_minor > -+ SQUASHFS_MINOR) { -+ SERROR("Major/Minor mismatch, trying to mount newer %d.%d " -+ "filesystem\n", sblk->s_major, sblk->s_minor); -+ SERROR("Please update your kernel\n"); -+ return 0; -+ } -+ -+ return 1; -+} -+ -+ -+static int squashfs_fill_super(struct super_block *s, void *data, int silent) -+{ -+ struct squashfs_sb_info *msblk; -+ struct squashfs_super_block *sblk; -+ int i; -+ char b[BDEVNAME_SIZE]; -+ struct inode *root; -+ -+ TRACE("Entered squashfs_read_superblock\n"); -+ -+ if (!(s->s_fs_info = kmalloc(sizeof(struct squashfs_sb_info), -+ GFP_KERNEL))) { -+ ERROR("Failed to allocate superblock\n"); -+ goto failure; -+ } -+ memset(s->s_fs_info, 0, sizeof(struct squashfs_sb_info)); -+ msblk = s->s_fs_info; -+ if (!(msblk->stream.workspace = vmalloc(zlib_inflate_workspacesize()))) { -+ ERROR("Failed to allocate zlib workspace\n"); -+ goto failure; -+ } -+ sblk = &msblk->sblk; -+ -+ msblk->devblksize = sb_min_blocksize(s, BLOCK_SIZE); -+ msblk->devblksize_log2 = ffz(~msblk->devblksize); -+ -+ mutex_init(&msblk->read_data_mutex); -+ mutex_init(&msblk->read_page_mutex); -+ mutex_init(&msblk->block_cache_mutex); -+ mutex_init(&msblk->fragment_mutex); -+ mutex_init(&msblk->meta_index_mutex); -+ -+ init_waitqueue_head(&msblk->waitq); -+ init_waitqueue_head(&msblk->fragment_wait_queue); -+ -+ sblk->bytes_used = sizeof(struct squashfs_super_block); -+ if (!squashfs_read_data(s, (char *) sblk, SQUASHFS_START, -+ sizeof(struct squashfs_super_block) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, sizeof(struct squashfs_super_block))) { -+ SERROR("unable to read superblock\n"); -+ goto failed_mount; -+ } -+ -+ /* Check it is a SQUASHFS superblock */ -+ msblk->swap = 0; -+ if ((s->s_magic = sblk->s_magic) != SQUASHFS_MAGIC) { -+ if (sblk->s_magic == SQUASHFS_MAGIC_SWAP) { -+ struct squashfs_super_block ssblk; -+ -+ WARNING("Mounting a different endian SQUASHFS " -+ "filesystem on %s\n", bdevname(s->s_bdev, b)); -+ -+ SQUASHFS_SWAP_SUPER_BLOCK(&ssblk, sblk); -+ memcpy(sblk, &ssblk, sizeof(struct squashfs_super_block)); -+ msblk->swap = 1; -+ } else { -+ SERROR("Can't find a SQUASHFS superblock on %s\n", -+ bdevname(s->s_bdev, b)); -+ goto failed_mount; -+ } -+ } -+ -+ /* Check the MAJOR & MINOR versions */ -+ if(!supported_squashfs_filesystem(msblk, silent)) -+ goto failed_mount; -+ -+ /* Check the filesystem does not extend beyond the end of the -+ block device */ -+ if(sblk->bytes_used < 0 || sblk->bytes_used > i_size_read(s->s_bdev->bd_inode)) -+ goto failed_mount; -+ -+ /* Check the root inode for sanity */ -+ if (SQUASHFS_INODE_OFFSET(sblk->root_inode) > SQUASHFS_METADATA_SIZE) -+ goto failed_mount; -+ -+ TRACE("Found valid superblock on %s\n", bdevname(s->s_bdev, b)); -+ TRACE("Inodes are %scompressed\n", -+ SQUASHFS_UNCOMPRESSED_INODES -+ (sblk->flags) ? "un" : ""); -+ TRACE("Data is %scompressed\n", -+ SQUASHFS_UNCOMPRESSED_DATA(sblk->flags) -+ ? "un" : ""); -+ TRACE("Check data is %s present in the filesystem\n", -+ SQUASHFS_CHECK_DATA(sblk->flags) ? -+ "" : "not"); -+ TRACE("Filesystem size %lld bytes\n", sblk->bytes_used); -+ TRACE("Block size %d\n", sblk->block_size); -+ TRACE("Number of inodes %d\n", sblk->inodes); -+ if (sblk->s_major > 1) -+ TRACE("Number of fragments %d\n", sblk->fragments); -+ TRACE("Number of uids %d\n", sblk->no_uids); -+ TRACE("Number of gids %d\n", sblk->no_guids); -+ TRACE("sblk->inode_table_start %llx\n", sblk->inode_table_start); -+ TRACE("sblk->directory_table_start %llx\n", sblk->directory_table_start); -+ if (sblk->s_major > 1) -+ TRACE("sblk->fragment_table_start %llx\n", -+ sblk->fragment_table_start); -+ TRACE("sblk->uid_start %llx\n", sblk->uid_start); -+ -+ s->s_flags |= MS_RDONLY; -+ s->s_op = &squashfs_super_ops; -+ -+ /* Init inode_table block pointer array */ -+ if (!(msblk->block_cache = kmalloc(sizeof(struct squashfs_cache) * -+ SQUASHFS_CACHED_BLKS, GFP_KERNEL))) { -+ ERROR("Failed to allocate block cache\n"); -+ goto failed_mount; -+ } -+ -+ for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) -+ msblk->block_cache[i].block = SQUASHFS_INVALID_BLK; -+ -+ msblk->next_cache = 0; -+ -+ /* Allocate read_page block */ -+ if (!(msblk->read_page = kmalloc(sblk->block_size, GFP_KERNEL))) { -+ ERROR("Failed to allocate read_page block\n"); -+ goto failed_mount; -+ } -+ -+ /* Allocate uid and gid tables */ -+ if (!(msblk->uid = kmalloc((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int), GFP_KERNEL))) { -+ ERROR("Failed to allocate uid/gid table\n"); -+ goto failed_mount; -+ } -+ msblk->guid = msblk->uid + sblk->no_uids; -+ -+ if (msblk->swap) { -+ unsigned int suid[sblk->no_uids + sblk->no_guids]; -+ -+ if (!squashfs_read_data(s, (char *) &suid, sblk->uid_start, -+ ((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int)) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, (sblk->no_uids + sblk->no_guids) * sizeof(unsigned int))) { -+ ERROR("unable to read uid/gid table\n"); -+ goto failed_mount; -+ } -+ -+ SQUASHFS_SWAP_DATA(msblk->uid, suid, (sblk->no_uids + -+ sblk->no_guids), (sizeof(unsigned int) * 8)); -+ } else -+ if (!squashfs_read_data(s, (char *) msblk->uid, sblk->uid_start, -+ ((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int)) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, (sblk->no_uids + sblk->no_guids) * sizeof(unsigned int))) { -+ ERROR("unable to read uid/gid table\n"); -+ goto failed_mount; -+ } -+ -+ -+ if (sblk->s_major == 1 && squashfs_1_0_supported(msblk)) -+ goto allocate_root; -+ -+ if (!(msblk->fragment = kmalloc(sizeof(struct squashfs_fragment_cache) * -+ SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL))) { -+ ERROR("Failed to allocate fragment block cache\n"); -+ goto failed_mount; -+ } -+ -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) { -+ msblk->fragment[i].locked = 0; -+ msblk->fragment[i].block = SQUASHFS_INVALID_BLK; -+ msblk->fragment[i].data = NULL; -+ } -+ -+ msblk->next_fragment = 0; -+ -+ /* Allocate and read fragment index table */ -+ if (msblk->read_fragment_index_table(s) == 0) -+ goto failed_mount; -+ -+ if(sblk->s_major < 3 || sblk->lookup_table_start == SQUASHFS_INVALID_BLK) -+ goto allocate_root; -+ -+ /* Allocate and read inode lookup table */ -+ if (read_inode_lookup_table(s) == 0) -+ goto failed_mount; -+ -+ s->s_op = &squashfs_export_super_ops; -+ s->s_export_op = &squashfs_export_ops; -+ -+allocate_root: -+ root = new_inode(s); -+ if ((msblk->read_inode)(root, sblk->root_inode) == 0) -+ goto failed_mount; -+ insert_inode_hash(root); -+ -+ if ((s->s_root = d_alloc_root(root)) == NULL) { -+ ERROR("Root inode create failed\n"); -+ iput(root); -+ goto failed_mount; -+ } -+ -+ TRACE("Leaving squashfs_read_super\n"); -+ return 0; -+ -+failed_mount: -+ kfree(msblk->inode_lookup_table); -+ kfree(msblk->fragment_index); -+ kfree(msblk->fragment); -+ kfree(msblk->uid); -+ kfree(msblk->read_page); -+ kfree(msblk->block_cache); -+ kfree(msblk->fragment_index_2); -+ vfree(msblk->stream.workspace); -+ kfree(s->s_fs_info); -+ s->s_fs_info = NULL; -+ return -EINVAL; -+ -+failure: -+ return -ENOMEM; -+} -+ -+ -+static int squashfs_statfs(struct dentry *dentry, struct kstatfs *buf) -+{ -+ struct squashfs_sb_info *msblk = dentry->d_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ TRACE("Entered squashfs_statfs\n"); -+ -+ buf->f_type = SQUASHFS_MAGIC; -+ buf->f_bsize = sblk->block_size; -+ buf->f_blocks = ((sblk->bytes_used - 1) >> sblk->block_log) + 1; -+ buf->f_bfree = buf->f_bavail = 0; -+ buf->f_files = sblk->inodes; -+ buf->f_ffree = 0; -+ buf->f_namelen = SQUASHFS_NAME_LEN; -+ -+ return 0; -+} -+ -+ -+static int squashfs_symlink_readpage(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ int index = page->index << PAGE_CACHE_SHIFT, length, bytes; -+ long long block = SQUASHFS_I(inode)->start_block; -+ int offset = SQUASHFS_I(inode)->offset; -+ void *pageaddr = kmap(page); -+ -+ TRACE("Entered squashfs_symlink_readpage, page index %ld, start block " -+ "%llx, offset %x\n", page->index, -+ SQUASHFS_I(inode)->start_block, -+ SQUASHFS_I(inode)->offset); -+ -+ for (length = 0; length < index; length += bytes) { -+ if (!(bytes = squashfs_get_cached_block(inode->i_sb, NULL, -+ block, offset, PAGE_CACHE_SIZE, &block, -+ &offset))) { -+ ERROR("Unable to read symbolic link [%llx:%x]\n", block, -+ offset); -+ goto skip_read; -+ } -+ } -+ -+ if (length != index) { -+ ERROR("(squashfs_symlink_readpage) length != index\n"); -+ bytes = 0; -+ goto skip_read; -+ } -+ -+ bytes = (i_size_read(inode) - length) > PAGE_CACHE_SIZE ? PAGE_CACHE_SIZE : -+ i_size_read(inode) - length; -+ -+ if (!(bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block, -+ offset, bytes, &block, &offset))) -+ ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset); -+ -+skip_read: -+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); -+ kunmap(page); -+ flush_dcache_page(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ return 0; -+} -+ -+ -+struct meta_index *locate_meta_index(struct inode *inode, int index, int offset) -+{ -+ struct meta_index *meta = NULL; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ int i; -+ -+ mutex_lock(&msblk->meta_index_mutex); -+ -+ TRACE("locate_meta_index: index %d, offset %d\n", index, offset); -+ -+ if(msblk->meta_index == NULL) -+ goto not_allocated; -+ -+ for (i = 0; i < SQUASHFS_META_NUMBER; i ++) -+ if (msblk->meta_index[i].inode_number == inode->i_ino && -+ msblk->meta_index[i].offset >= offset && -+ msblk->meta_index[i].offset <= index && -+ msblk->meta_index[i].locked == 0) { -+ TRACE("locate_meta_index: entry %d, offset %d\n", i, -+ msblk->meta_index[i].offset); -+ meta = &msblk->meta_index[i]; -+ offset = meta->offset; -+ } -+ -+ if (meta) -+ meta->locked = 1; -+ -+not_allocated: -+ mutex_unlock(&msblk->meta_index_mutex); -+ -+ return meta; -+} -+ -+ -+struct meta_index *empty_meta_index(struct inode *inode, int offset, int skip) -+{ -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct meta_index *meta = NULL; -+ int i; -+ -+ mutex_lock(&msblk->meta_index_mutex); -+ -+ TRACE("empty_meta_index: offset %d, skip %d\n", offset, skip); -+ -+ if(msblk->meta_index == NULL) { -+ if (!(msblk->meta_index = kmalloc(sizeof(struct meta_index) * -+ SQUASHFS_META_NUMBER, GFP_KERNEL))) { -+ ERROR("Failed to allocate meta_index\n"); -+ goto failed; -+ } -+ for(i = 0; i < SQUASHFS_META_NUMBER; i++) { -+ msblk->meta_index[i].inode_number = 0; -+ msblk->meta_index[i].locked = 0; -+ } -+ msblk->next_meta_index = 0; -+ } -+ -+ for(i = SQUASHFS_META_NUMBER; i && -+ msblk->meta_index[msblk->next_meta_index].locked; i --) -+ msblk->next_meta_index = (msblk->next_meta_index + 1) % -+ SQUASHFS_META_NUMBER; -+ -+ if(i == 0) { -+ TRACE("empty_meta_index: failed!\n"); -+ goto failed; -+ } -+ -+ TRACE("empty_meta_index: returned meta entry %d, %p\n", -+ msblk->next_meta_index, -+ &msblk->meta_index[msblk->next_meta_index]); -+ -+ meta = &msblk->meta_index[msblk->next_meta_index]; -+ msblk->next_meta_index = (msblk->next_meta_index + 1) % -+ SQUASHFS_META_NUMBER; -+ -+ meta->inode_number = inode->i_ino; -+ meta->offset = offset; -+ meta->skip = skip; -+ meta->entries = 0; -+ meta->locked = 1; -+ -+failed: -+ mutex_unlock(&msblk->meta_index_mutex); -+ return meta; -+} -+ -+ -+void release_meta_index(struct inode *inode, struct meta_index *meta) -+{ -+ meta->locked = 0; -+ smp_mb(); -+} -+ -+ -+static int read_block_index(struct super_block *s, int blocks, char *block_list, -+ long long *start_block, int *offset) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ unsigned int *block_listp; -+ int block = 0; -+ -+ if (msblk->swap) { -+ char sblock_list[blocks << 2]; -+ -+ if (!squashfs_get_cached_block(s, sblock_list, *start_block, -+ *offset, blocks << 2, start_block, offset)) { -+ ERROR("Unable to read block list [%llx:%x]\n", -+ *start_block, *offset); -+ goto failure; -+ } -+ SQUASHFS_SWAP_INTS(((unsigned int *)block_list), -+ ((unsigned int *)sblock_list), blocks); -+ } else -+ if (!squashfs_get_cached_block(s, block_list, *start_block, -+ *offset, blocks << 2, start_block, offset)) { -+ ERROR("Unable to read block list [%llx:%x]\n", -+ *start_block, *offset); -+ goto failure; -+ } -+ -+ for (block_listp = (unsigned int *) block_list; blocks; -+ block_listp++, blocks --) -+ block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp); -+ -+ return block; -+ -+failure: -+ return -1; -+} -+ -+ -+#define SIZE 256 -+ -+static inline int calculate_skip(int blocks) { -+ int skip = (blocks - 1) / ((SQUASHFS_SLOTS * SQUASHFS_META_ENTRIES + 1) * SQUASHFS_META_INDEXES); -+ return skip >= 7 ? 7 : skip + 1; -+} -+ -+ -+static int get_meta_index(struct inode *inode, int index, -+ long long *index_block, int *index_offset, -+ long long *data_block, char *block_list) -+{ -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int skip = calculate_skip(i_size_read(inode) >> sblk->block_log); -+ int offset = 0; -+ struct meta_index *meta; -+ struct meta_entry *meta_entry; -+ long long cur_index_block = SQUASHFS_I(inode)->u.s1.block_list_start; -+ int cur_offset = SQUASHFS_I(inode)->offset; -+ long long cur_data_block = SQUASHFS_I(inode)->start_block; -+ int i; -+ -+ index /= SQUASHFS_META_INDEXES * skip; -+ -+ while ( offset < index ) { -+ meta = locate_meta_index(inode, index, offset + 1); -+ -+ if (meta == NULL) { -+ if ((meta = empty_meta_index(inode, offset + 1, -+ skip)) == NULL) -+ goto all_done; -+ } else { -+ if(meta->entries == 0) -+ goto failed; -+ offset = index < meta->offset + meta->entries ? index : -+ meta->offset + meta->entries - 1; -+ meta_entry = &meta->meta_entry[offset - meta->offset]; -+ cur_index_block = meta_entry->index_block + sblk->inode_table_start; -+ cur_offset = meta_entry->offset; -+ cur_data_block = meta_entry->data_block; -+ TRACE("get_meta_index: offset %d, meta->offset %d, " -+ "meta->entries %d\n", offset, meta->offset, -+ meta->entries); -+ TRACE("get_meta_index: index_block 0x%llx, offset 0x%x" -+ " data_block 0x%llx\n", cur_index_block, -+ cur_offset, cur_data_block); -+ } -+ -+ for (i = meta->offset + meta->entries; i <= index && -+ i < meta->offset + SQUASHFS_META_ENTRIES; i++) { -+ int blocks = skip * SQUASHFS_META_INDEXES; -+ -+ while (blocks) { -+ int block = blocks > (SIZE >> 2) ? (SIZE >> 2) : -+ blocks; -+ int res = read_block_index(inode->i_sb, block, -+ block_list, &cur_index_block, -+ &cur_offset); -+ -+ if (res == -1) -+ goto failed; -+ -+ cur_data_block += res; -+ blocks -= block; -+ } -+ -+ meta_entry = &meta->meta_entry[i - meta->offset]; -+ meta_entry->index_block = cur_index_block - sblk->inode_table_start; -+ meta_entry->offset = cur_offset; -+ meta_entry->data_block = cur_data_block; -+ meta->entries ++; -+ offset ++; -+ } -+ -+ TRACE("get_meta_index: meta->offset %d, meta->entries %d\n", -+ meta->offset, meta->entries); -+ -+ release_meta_index(inode, meta); -+ } -+ -+all_done: -+ *index_block = cur_index_block; -+ *index_offset = cur_offset; -+ *data_block = cur_data_block; -+ -+ return offset * SQUASHFS_META_INDEXES * skip; -+ -+failed: -+ release_meta_index(inode, meta); -+ return -1; -+} -+ -+ -+static long long read_blocklist(struct inode *inode, int index, -+ int readahead_blks, char *block_list, -+ unsigned short **block_p, unsigned int *bsize) -+{ -+ long long block_ptr; -+ int offset; -+ long long block; -+ int res = get_meta_index(inode, index, &block_ptr, &offset, &block, -+ block_list); -+ -+ TRACE("read_blocklist: res %d, index %d, block_ptr 0x%llx, offset" -+ " 0x%x, block 0x%llx\n", res, index, block_ptr, offset, -+ block); -+ -+ if(res == -1) -+ goto failure; -+ -+ index -= res; -+ -+ while ( index ) { -+ int blocks = index > (SIZE >> 2) ? (SIZE >> 2) : index; -+ int res = read_block_index(inode->i_sb, blocks, block_list, -+ &block_ptr, &offset); -+ if (res == -1) -+ goto failure; -+ block += res; -+ index -= blocks; -+ } -+ -+ if (read_block_index(inode->i_sb, 1, block_list, -+ &block_ptr, &offset) == -1) -+ goto failure; -+ *bsize = *((unsigned int *) block_list); -+ -+ return block; -+ -+failure: -+ return 0; -+} -+ -+ -+static int squashfs_readpage(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned char *block_list; -+ long long block; -+ unsigned int bsize, i = 0, bytes = 0, byte_offset = 0; -+ int index = page->index >> (sblk->block_log - PAGE_CACHE_SHIFT); -+ void *pageaddr; -+ struct squashfs_fragment_cache *fragment = NULL; -+ char *data_ptr = msblk->read_page; -+ -+ int mask = (1 << (sblk->block_log - PAGE_CACHE_SHIFT)) - 1; -+ int start_index = page->index & ~mask; -+ int end_index = start_index | mask; -+ -+ TRACE("Entered squashfs_readpage, page index %lx, start block %llx\n", -+ page->index, -+ SQUASHFS_I(inode)->start_block); -+ -+ if (!(block_list = kmalloc(SIZE, GFP_KERNEL))) { -+ ERROR("Failed to allocate block_list\n"); -+ goto skip_read; -+ } -+ -+ if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> -+ PAGE_CACHE_SHIFT)) -+ goto skip_read; -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || index < (i_size_read(inode) >> -+ sblk->block_log)) { -+ if ((block = (msblk->read_blocklist)(inode, index, 1, -+ block_list, NULL, &bsize)) == 0) -+ goto skip_read; -+ -+ mutex_lock(&msblk->read_page_mutex); -+ -+ if (!(bytes = squashfs_read_data(inode->i_sb, msblk->read_page, -+ block, bsize, NULL, sblk->block_size))) { -+ ERROR("Unable to read page, block %llx, size %x\n", block, -+ bsize); -+ mutex_unlock(&msblk->read_page_mutex); -+ goto skip_read; -+ } -+ } else { -+ if ((fragment = get_cached_fragment(inode->i_sb, -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, -+ SQUASHFS_I(inode)->u.s1.fragment_size)) -+ == NULL) { -+ ERROR("Unable to read page, block %llx, size %x\n", -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, -+ (int) SQUASHFS_I(inode)-> -+ u.s1.fragment_size); -+ goto skip_read; -+ } -+ bytes = SQUASHFS_I(inode)->u.s1.fragment_offset + -+ (i_size_read(inode) & (sblk->block_size -+ - 1)); -+ byte_offset = SQUASHFS_I(inode)->u.s1.fragment_offset; -+ data_ptr = fragment->data; -+ } -+ -+ for (i = start_index; i <= end_index && byte_offset < bytes; -+ i++, byte_offset += PAGE_CACHE_SIZE) { -+ struct page *push_page; -+ int avail = (bytes - byte_offset) > PAGE_CACHE_SIZE ? -+ PAGE_CACHE_SIZE : bytes - byte_offset; -+ -+ TRACE("bytes %d, i %d, byte_offset %d, available_bytes %d\n", -+ bytes, i, byte_offset, avail); -+ -+ push_page = (i == page->index) ? page : -+ grab_cache_page_nowait(page->mapping, i); -+ -+ if (!push_page) -+ continue; -+ -+ if (PageUptodate(push_page)) -+ goto skip_page; -+ -+ pageaddr = kmap_atomic(push_page, KM_USER0); -+ memcpy(pageaddr, data_ptr + byte_offset, avail); -+ memset(pageaddr + avail, 0, PAGE_CACHE_SIZE - avail); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(push_page); -+ SetPageUptodate(push_page); -+skip_page: -+ unlock_page(push_page); -+ if(i != page->index) -+ page_cache_release(push_page); -+ } -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || index < (i_size_read(inode) >> -+ sblk->block_log)) -+ mutex_unlock(&msblk->read_page_mutex); -+ else -+ release_cached_fragment(msblk, fragment); -+ -+ kfree(block_list); -+ return 0; -+ -+skip_read: -+ pageaddr = kmap_atomic(page, KM_USER0); -+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ kfree(block_list); -+ return 0; -+} -+ -+ -+static int squashfs_readpage4K(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned char *block_list; -+ long long block; -+ unsigned int bsize, bytes = 0; -+ void *pageaddr; -+ -+ TRACE("Entered squashfs_readpage4K, page index %lx, start block %llx\n", -+ page->index, -+ SQUASHFS_I(inode)->start_block); -+ -+ if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> -+ PAGE_CACHE_SHIFT)) { -+ block_list = NULL; -+ goto skip_read; -+ } -+ -+ if (!(block_list = kmalloc(SIZE, GFP_KERNEL))) { -+ ERROR("Failed to allocate block_list\n"); -+ goto skip_read; -+ } -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || page->index < (i_size_read(inode) >> -+ sblk->block_log)) { -+ block = (msblk->read_blocklist)(inode, page->index, 1, -+ block_list, NULL, &bsize); -+ if(block == 0) -+ goto skip_read; -+ -+ mutex_lock(&msblk->read_page_mutex); -+ bytes = squashfs_read_data(inode->i_sb, msblk->read_page, block, -+ bsize, NULL, sblk->block_size); -+ if (bytes) { -+ pageaddr = kmap_atomic(page, KM_USER0); -+ memcpy(pageaddr, msblk->read_page, bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ } else -+ ERROR("Unable to read page, block %llx, size %x\n", -+ block, bsize); -+ mutex_unlock(&msblk->read_page_mutex); -+ } else { -+ struct squashfs_fragment_cache *fragment = -+ get_cached_fragment(inode->i_sb, -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, -+ SQUASHFS_I(inode)-> u.s1.fragment_size); -+ if (fragment) { -+ bytes = i_size_read(inode) & (sblk->block_size - 1); -+ pageaddr = kmap_atomic(page, KM_USER0); -+ memcpy(pageaddr, fragment->data + SQUASHFS_I(inode)-> -+ u.s1.fragment_offset, bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ release_cached_fragment(msblk, fragment); -+ } else -+ ERROR("Unable to read page, block %llx, size %x\n", -+ SQUASHFS_I(inode)-> -+ u.s1.fragment_start_block, (int) -+ SQUASHFS_I(inode)-> u.s1.fragment_size); -+ } -+ -+skip_read: -+ pageaddr = kmap_atomic(page, KM_USER0); -+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ kfree(block_list); -+ return 0; -+} -+ -+ -+static int get_dir_index_using_offset(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ long long f_pos) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index index; -+ -+ TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n", -+ i_count, (unsigned int) f_pos); -+ -+ f_pos =- 3; -+ if (f_pos == 0) -+ goto finish; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX(&index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) &index, -+ index_start, index_offset, -+ sizeof(index), &index_start, -+ &index_offset); -+ -+ if (index.index > f_pos) -+ break; -+ -+ squashfs_get_cached_block(s, NULL, index_start, index_offset, -+ index.size + 1, &index_start, -+ &index_offset); -+ -+ length = index.index; -+ *next_block = index.start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ -+finish: -+ return length + 3; -+} -+ -+ -+static int get_dir_index_using_name(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ const char *name, int size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index *index; -+ char *str; -+ -+ TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count); -+ -+ if (!(str = kmalloc(sizeof(struct squashfs_dir_index) + -+ (SQUASHFS_NAME_LEN + 1) * 2, GFP_KERNEL))) { -+ ERROR("Failed to allocate squashfs_dir_index\n"); -+ goto failure; -+ } -+ -+ index = (struct squashfs_dir_index *) (str + SQUASHFS_NAME_LEN + 1); -+ strncpy(str, name, size); -+ str[size] = '\0'; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX(index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) index, -+ index_start, index_offset, -+ sizeof(struct squashfs_dir_index), -+ &index_start, &index_offset); -+ -+ squashfs_get_cached_block(s, index->name, index_start, -+ index_offset, index->size + 1, -+ &index_start, &index_offset); -+ -+ index->name[index->size + 1] = '\0'; -+ -+ if (strcmp(index->name, str) > 0) -+ break; -+ -+ length = index->index; -+ *next_block = index->start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ kfree(str); -+failure: -+ return length + 3; -+} -+ -+ -+static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir) -+{ -+ struct inode *i = file->f_dentry->d_inode; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, -+ dir_count; -+ struct squashfs_dir_header dirh; -+ struct squashfs_dir_entry *dire; -+ -+ TRACE("Entered squashfs_readdir [%llx:%x]\n", next_block, next_offset); -+ -+ if (!(dire = kmalloc(sizeof(struct squashfs_dir_entry) + -+ SQUASHFS_NAME_LEN + 1, GFP_KERNEL))) { -+ ERROR("Failed to allocate squashfs_dir_entry\n"); -+ goto finish; -+ } -+ -+ while(file->f_pos < 3) { -+ char *name; -+ int size, i_ino; -+ -+ if(file->f_pos == 0) { -+ name = "."; -+ size = 1; -+ i_ino = i->i_ino; -+ } else { -+ name = ".."; -+ size = 2; -+ i_ino = SQUASHFS_I(i)->u.s2.parent_inode; -+ } -+ TRACE("Calling filldir(%x, %s, %d, %d, %d, %d)\n", -+ (unsigned int) dirent, name, size, (int) -+ file->f_pos, i_ino, -+ squashfs_filetype_table[1]); -+ -+ if (filldir(dirent, name, size, -+ file->f_pos, i_ino, -+ squashfs_filetype_table[1]) < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos += size; -+ } -+ -+ length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, -+ file->f_pos); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header sdirh; -+ -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block, next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block, next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, -+ dire->size + 1, &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (file->f_pos >= length) -+ continue; -+ -+ dire->name[dire->size + 1] = '\0'; -+ -+ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d, %d)\n", -+ (unsigned int) dirent, dire->name, -+ dire->size + 1, (int) file->f_pos, -+ dirh.start_block, dire->offset, -+ dirh.inode_number + dire->inode_number, -+ squashfs_filetype_table[dire->type]); -+ -+ if (filldir(dirent, dire->name, dire->size + 1, -+ file->f_pos, -+ dirh.inode_number + dire->inode_number, -+ squashfs_filetype_table[dire->type]) -+ < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos = length; -+ } -+ } -+ -+finish: -+ kfree(dire); -+ return 0; -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ kfree(dire); -+ return 0; -+} -+ -+ -+static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry, -+ struct nameidata *nd) -+{ -+ const unsigned char *name = dentry->d_name.name; -+ int len = dentry->d_name.len; -+ struct inode *inode = NULL; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, -+ dir_count; -+ struct squashfs_dir_header dirh; -+ struct squashfs_dir_entry *dire; -+ -+ TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset); -+ -+ if (!(dire = kmalloc(sizeof(struct squashfs_dir_entry) + -+ SQUASHFS_NAME_LEN + 1, GFP_KERNEL))) { -+ ERROR("Failed to allocate squashfs_dir_entry\n"); -+ goto exit_lookup; -+ } -+ -+ if (len > SQUASHFS_NAME_LEN) -+ goto exit_lookup; -+ -+ length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, name, -+ len); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header sdirh; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block,next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block,next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, dire->size + 1, -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (name[0] < dire->name[0]) -+ goto exit_lookup; -+ -+ if ((len == dire->size + 1) && !strncmp(name, dire->name, len)) { -+ squashfs_inode_t ino = SQUASHFS_MKINODE(dirh.start_block, -+ dire->offset); -+ -+ TRACE("calling squashfs_iget for directory " -+ "entry %s, inode %x:%x, %d\n", name, -+ dirh.start_block, dire->offset, -+ dirh.inode_number + dire->inode_number); -+ -+ inode = squashfs_iget(i->i_sb, ino, dirh.inode_number + dire->inode_number); -+ -+ goto exit_lookup; -+ } -+ } -+ } -+ -+exit_lookup: -+ kfree(dire); -+ if (inode) -+ return d_splice_alias(inode, dentry); -+ d_add(dentry, inode); -+ return ERR_PTR(0); -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ goto exit_lookup; -+} -+ -+ -+static int squashfs_remount(struct super_block *s, int *flags, char *data) -+{ -+ *flags |= MS_RDONLY; -+ return 0; -+} -+ -+ -+static void squashfs_put_super(struct super_block *s) -+{ -+ int i; -+ -+ if (s->s_fs_info) { -+ struct squashfs_sb_info *sbi = s->s_fs_info; -+ if (sbi->block_cache) -+ for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) -+ if (sbi->block_cache[i].block != -+ SQUASHFS_INVALID_BLK) -+ kfree(sbi->block_cache[i].data); -+ if (sbi->fragment) -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) -+ SQUASHFS_FREE(sbi->fragment[i].data); -+ kfree(sbi->fragment); -+ kfree(sbi->block_cache); -+ kfree(sbi->read_page); -+ kfree(sbi->uid); -+ kfree(sbi->fragment_index); -+ kfree(sbi->fragment_index_2); -+ kfree(sbi->meta_index); -+ vfree(sbi->stream.workspace); -+ kfree(s->s_fs_info); -+ s->s_fs_info = NULL; -+ } -+} -+ -+ -+static int squashfs_get_sb(struct file_system_type *fs_type, int flags, -+ const char *dev_name, void *data, -+ struct vfsmount *mnt) -+{ -+ return get_sb_bdev(fs_type, flags, dev_name, data, squashfs_fill_super, -+ mnt); -+} -+ -+ -+static int __init init_squashfs_fs(void) -+{ -+ int err = init_inodecache(); -+ if (err) -+ goto out; -+ -+ printk(KERN_INFO "squashfs: version 3.2-r2 (2007/01/15) " -+ "Phillip Lougher\n"); -+ -+ if ((err = register_filesystem(&squashfs_fs_type))) -+ destroy_inodecache(); -+ -+out: -+ return err; -+} -+ -+ -+static void __exit exit_squashfs_fs(void) -+{ -+ unregister_filesystem(&squashfs_fs_type); -+ destroy_inodecache(); -+} -+ -+ -+static struct kmem_cache * squashfs_inode_cachep; -+ -+ -+static struct inode *squashfs_alloc_inode(struct super_block *sb) -+{ -+ struct squashfs_inode_info *ei; -+ ei = kmem_cache_alloc(squashfs_inode_cachep, GFP_KERNEL); -+ if (!ei) -+ return NULL; -+ return &ei->vfs_inode; -+} -+ -+ -+static void squashfs_destroy_inode(struct inode *inode) -+{ -+ kmem_cache_free(squashfs_inode_cachep, SQUASHFS_I(inode)); -+} -+ -+ -+static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flags) -+{ -+ struct squashfs_inode_info *ei = foo; -+ -+ if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) == -+ SLAB_CTOR_CONSTRUCTOR) -+ inode_init_once(&ei->vfs_inode); -+} -+ -+ -+static int __init init_inodecache(void) -+{ -+ squashfs_inode_cachep = kmem_cache_create("squashfs_inode_cache", -+ sizeof(struct squashfs_inode_info), -+ 0, SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT, -+ init_once, NULL); -+ if (squashfs_inode_cachep == NULL) -+ return -ENOMEM; -+ return 0; -+} -+ -+ -+static void destroy_inodecache(void) -+{ -+ kmem_cache_destroy(squashfs_inode_cachep); -+} -+ -+ -+module_init(init_squashfs_fs); -+module_exit(exit_squashfs_fs); -+MODULE_DESCRIPTION("squashfs 3.2-r2, a compressed read-only filesystem"); -+MODULE_AUTHOR("Phillip Lougher "); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ linux-2.6.24-rc1/fs/squashfs/Makefile -@@ -0,0 +1,7 @@ -+# -+# Makefile for the linux squashfs routines. -+# -+ -+obj-$(CONFIG_SQUASHFS) += squashfs.o -+squashfs-y += inode.o -+squashfs-y += squashfs2_0.o ---- /dev/null -+++ linux-2.6.24-rc1/fs/squashfs/squashfs2_0.c -@@ -0,0 +1,742 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs2_0.c -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "squashfs.h" -+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir); -+static struct dentry *squashfs_lookup_2(struct inode *, struct dentry *, -+ struct nameidata *); -+ -+static struct file_operations squashfs_dir_ops_2 = { -+ .read = generic_read_dir, -+ .readdir = squashfs_readdir_2 -+}; -+ -+static struct inode_operations squashfs_dir_inode_ops_2 = { -+ .lookup = squashfs_lookup_2 -+}; -+ -+static unsigned char squashfs_filetype_table[] = { -+ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK -+}; -+ -+static int read_fragment_index_table_2(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ if (!(msblk->fragment_index_2 = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES_2 -+ (sblk->fragments), GFP_KERNEL))) { -+ ERROR("Failed to allocate uid/gid table\n"); -+ return 0; -+ } -+ -+ if (SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments) && -+ !squashfs_read_data(s, (char *) -+ msblk->fragment_index_2, -+ sblk->fragment_table_start, -+ SQUASHFS_FRAGMENT_INDEX_BYTES_2 -+ (sblk->fragments) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments))) { -+ ERROR("unable to read fragment index table\n"); -+ return 0; -+ } -+ -+ if (msblk->swap) { -+ int i; -+ unsigned int fragment; -+ -+ for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES_2(sblk->fragments); -+ i++) { -+ SQUASHFS_SWAP_FRAGMENT_INDEXES_2((&fragment), -+ &msblk->fragment_index_2[i], 1); -+ msblk->fragment_index_2[i] = fragment; -+ } -+ } -+ -+ return 1; -+} -+ -+ -+static int get_fragment_location_2(struct super_block *s, unsigned int fragment, -+ long long *fragment_start_block, -+ unsigned int *fragment_size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ long long start_block = -+ msblk->fragment_index_2[SQUASHFS_FRAGMENT_INDEX_2(fragment)]; -+ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET_2(fragment); -+ struct squashfs_fragment_entry_2 fragment_entry; -+ -+ if (msblk->swap) { -+ struct squashfs_fragment_entry_2 sfragment_entry; -+ -+ if (!squashfs_get_cached_block(s, (char *) &sfragment_entry, -+ start_block, offset, -+ sizeof(sfragment_entry), &start_block, -+ &offset)) -+ goto out; -+ SQUASHFS_SWAP_FRAGMENT_ENTRY_2(&fragment_entry, &sfragment_entry); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) &fragment_entry, -+ start_block, offset, -+ sizeof(fragment_entry), &start_block, -+ &offset)) -+ goto out; -+ -+ *fragment_start_block = fragment_entry.start_block; -+ *fragment_size = fragment_entry.size; -+ -+ return 1; -+ -+out: -+ return 0; -+} -+ -+ -+static void squashfs_new_inode(struct squashfs_sb_info *msblk, struct inode *i, -+ struct squashfs_base_inode_header_2 *inodeb, unsigned int ino) -+{ -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ i->i_ino = ino; -+ i->i_mtime.tv_sec = sblk->mkfs_time; -+ i->i_atime.tv_sec = sblk->mkfs_time; -+ i->i_ctime.tv_sec = sblk->mkfs_time; -+ i->i_uid = msblk->uid[inodeb->uid]; -+ i->i_mode = inodeb->mode; -+ i->i_nlink = 1; -+ i->i_size = 0; -+ if (inodeb->guid == SQUASHFS_GUIDS) -+ i->i_gid = i->i_uid; -+ else -+ i->i_gid = msblk->guid[inodeb->guid]; -+} -+ -+ -+static int squashfs_read_inode_2(struct inode *i, squashfs_inode_t inode) -+{ -+ struct super_block *s = i->i_sb; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned int block = SQUASHFS_INODE_BLK(inode) + -+ sblk->inode_table_start; -+ unsigned int offset = SQUASHFS_INODE_OFFSET(inode); -+ unsigned int ino = i->i_ino; -+ long long next_block; -+ unsigned int next_offset; -+ union squashfs_inode_header_2 id, sid; -+ struct squashfs_base_inode_header_2 *inodeb = &id.base, -+ *sinodeb = &sid.base; -+ -+ TRACE("Entered squashfs_iget\n"); -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) sinodeb, block, -+ offset, sizeof(*sinodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_BASE_INODE_HEADER_2(inodeb, sinodeb, -+ sizeof(*sinodeb)); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) inodeb, block, -+ offset, sizeof(*inodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ squashfs_new_inode(msblk, i, inodeb, ino); -+ -+ switch(inodeb->inode_type) { -+ case SQUASHFS_FILE_TYPE: { -+ struct squashfs_reg_inode_header_2 *inodep = &id.reg; -+ struct squashfs_reg_inode_header_2 *sinodep = &sid.reg; -+ long long frag_blk; -+ unsigned int frag_size = 0; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_REG_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG && -+ !get_fragment_location_2(s, -+ inodep->fragment, &frag_blk, &frag_size)) -+ goto failed_read; -+ -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ if (sblk->block_size > 4096) -+ i->i_data.a_ops = &squashfs_aops; -+ else -+ i->i_data.a_ops = &squashfs_aops_4K; -+ -+ TRACE("File inode %x:%x, start_block %x, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_DIR_TYPE: { -+ struct squashfs_dir_inode_header_2 *inodep = &id.dir; -+ struct squashfs_dir_inode_header_2 *sinodep = &sid.dir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DIR_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops_2; -+ i->i_fop = &squashfs_dir_ops_2; -+ i->i_mode |= S_IFDIR; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = 0; -+ SQUASHFS_I(i)->u.s2.parent_inode = 0; -+ -+ TRACE("Directory inode %x:%x, start_block %x, offset " -+ "%x\n", SQUASHFS_INODE_BLK(inode), -+ offset, inodep->start_block, -+ inodep->offset); -+ break; -+ } -+ case SQUASHFS_LDIR_TYPE: { -+ struct squashfs_ldir_inode_header_2 *inodep = &id.ldir; -+ struct squashfs_ldir_inode_header_2 *sinodep = &sid.ldir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LDIR_INODE_HEADER_2(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops_2; -+ i->i_fop = &squashfs_dir_ops_2; -+ i->i_mode |= S_IFDIR; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_start = next_block; -+ SQUASHFS_I(i)->u.s2.directory_index_offset = -+ next_offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = -+ inodep->i_count; -+ SQUASHFS_I(i)->u.s2.parent_inode = 0; -+ -+ TRACE("Long directory inode %x:%x, start_block %x, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, inodep->offset); -+ break; -+ } -+ case SQUASHFS_SYMLINK_TYPE: { -+ struct squashfs_symlink_inode_header_2 *inodep = -+ &id.symlink; -+ struct squashfs_symlink_inode_header_2 *sinodep = -+ &sid.symlink; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_size = inodep->symlink_size; -+ i->i_op = &page_symlink_inode_operations; -+ i->i_data.a_ops = &squashfs_symlink_aops; -+ i->i_mode |= S_IFLNK; -+ SQUASHFS_I(i)->start_block = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ -+ TRACE("Symbolic link inode %x:%x, start_block %llx, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ next_block, next_offset); -+ break; -+ } -+ case SQUASHFS_BLKDEV_TYPE: -+ case SQUASHFS_CHRDEV_TYPE: { -+ struct squashfs_dev_inode_header_2 *inodep = &id.dev; -+ struct squashfs_dev_inode_header_2 *sinodep = &sid.dev; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DEV_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_mode |= (inodeb->inode_type == -+ SQUASHFS_CHRDEV_TYPE) ? S_IFCHR : -+ S_IFBLK; -+ init_special_inode(i, i->i_mode, -+ old_decode_dev(inodep->rdev)); -+ -+ TRACE("Device inode %x:%x, rdev %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->rdev); -+ break; -+ } -+ case SQUASHFS_FIFO_TYPE: -+ case SQUASHFS_SOCKET_TYPE: { -+ -+ i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE) -+ ? S_IFIFO : S_IFSOCK; -+ init_special_inode(i, i->i_mode, 0); -+ break; -+ } -+ default: -+ ERROR("Unknown inode type %d in squashfs_iget!\n", -+ inodeb->inode_type); -+ goto failed_read1; -+ } -+ -+ return 1; -+ -+failed_read: -+ ERROR("Unable to read inode [%x:%x]\n", block, offset); -+ -+failed_read1: -+ return 0; -+} -+ -+ -+static int get_dir_index_using_offset(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ long long f_pos) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index_2 index; -+ -+ TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n", -+ i_count, (unsigned int) f_pos); -+ -+ if (f_pos == 0) -+ goto finish; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index_2 sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX_2(&index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) &index, -+ index_start, index_offset, -+ sizeof(index), &index_start, -+ &index_offset); -+ -+ if (index.index > f_pos) -+ break; -+ -+ squashfs_get_cached_block(s, NULL, index_start, index_offset, -+ index.size + 1, &index_start, -+ &index_offset); -+ -+ length = index.index; -+ *next_block = index.start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ -+finish: -+ return length; -+} -+ -+ -+static int get_dir_index_using_name(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ const char *name, int size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index_2 *index; -+ char *str; -+ -+ TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count); -+ -+ if (!(str = kmalloc(sizeof(struct squashfs_dir_index) + -+ (SQUASHFS_NAME_LEN + 1) * 2, GFP_KERNEL))) { -+ ERROR("Failed to allocate squashfs_dir_index\n"); -+ goto failure; -+ } -+ -+ index = (struct squashfs_dir_index_2 *) (str + SQUASHFS_NAME_LEN + 1); -+ strncpy(str, name, size); -+ str[size] = '\0'; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index_2 sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX_2(index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) index, -+ index_start, index_offset, -+ sizeof(struct squashfs_dir_index_2), -+ &index_start, &index_offset); -+ -+ squashfs_get_cached_block(s, index->name, index_start, -+ index_offset, index->size + 1, -+ &index_start, &index_offset); -+ -+ index->name[index->size + 1] = '\0'; -+ -+ if (strcmp(index->name, str) > 0) -+ break; -+ -+ length = index->index; -+ *next_block = index->start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ kfree(str); -+failure: -+ return length; -+} -+ -+ -+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir) -+{ -+ struct inode *i = file->f_dentry->d_inode; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, -+ dir_count; -+ struct squashfs_dir_header_2 dirh; -+ struct squashfs_dir_entry_2 *dire; -+ -+ TRACE("Entered squashfs_readdir_2 [%llx:%x]\n", next_block, next_offset); -+ -+ if (!(dire = kmalloc(sizeof(struct squashfs_dir_entry) + -+ SQUASHFS_NAME_LEN + 1, GFP_KERNEL))) { -+ ERROR("Failed to allocate squashfs_dir_entry\n"); -+ goto finish; -+ } -+ -+ length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, -+ file->f_pos); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header_2 sdirh; -+ -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry_2 sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block, next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block, next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, -+ dire->size + 1, &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (file->f_pos >= length) -+ continue; -+ -+ dire->name[dire->size + 1] = '\0'; -+ -+ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n", -+ (unsigned int) dirent, dire->name, -+ dire->size + 1, (int) file->f_pos, -+ dirh.start_block, dire->offset, -+ squashfs_filetype_table[dire->type]); -+ -+ if (filldir(dirent, dire->name, dire->size + 1, -+ file->f_pos, SQUASHFS_MK_VFS_INODE( -+ dirh.start_block, dire->offset), -+ squashfs_filetype_table[dire->type]) -+ < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos = length; -+ } -+ } -+ -+finish: -+ kfree(dire); -+ return 0; -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ kfree(dire); -+ return 0; -+} -+ -+ -+static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry, -+ struct nameidata *nd) -+{ -+ const unsigned char *name = dentry->d_name.name; -+ int len = dentry->d_name.len; -+ struct inode *inode = NULL; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, -+ dir_count; -+ struct squashfs_dir_header_2 dirh; -+ struct squashfs_dir_entry_2 *dire; -+ int sorted = sblk->s_major == 2 && sblk->s_minor >= 1; -+ -+ TRACE("Entered squashfs_lookup_2 [%llx:%x]\n", next_block, next_offset); -+ -+ if (!(dire = kmalloc(sizeof(struct squashfs_dir_entry) + -+ SQUASHFS_NAME_LEN + 1, GFP_KERNEL))) { -+ ERROR("Failed to allocate squashfs_dir_entry\n"); -+ goto exit_loop; -+ } -+ -+ if (len > SQUASHFS_NAME_LEN) -+ goto exit_loop; -+ -+ length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, name, -+ len); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header_2 sdirh; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry_2 sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block,next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block,next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, dire->size + 1, -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (sorted && name[0] < dire->name[0]) -+ goto exit_loop; -+ -+ if ((len == dire->size + 1) && !strncmp(name, -+ dire->name, len)) { -+ squashfs_inode_t ino = -+ SQUASHFS_MKINODE(dirh.start_block, -+ dire->offset); -+ unsigned int inode_number = SQUASHFS_MK_VFS_INODE(dirh.start_block, -+ dire->offset); -+ -+ TRACE("calling squashfs_iget for directory " -+ "entry %s, inode %x:%x, %lld\n", name, -+ dirh.start_block, dire->offset, ino); -+ -+ inode = squashfs_iget(i->i_sb, ino, inode_number); -+ -+ goto exit_loop; -+ } -+ } -+ } -+ -+exit_loop: -+ kfree(dire); -+ d_add(dentry, inode); -+ return ERR_PTR(0); -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ goto exit_loop; -+} -+ -+ -+int squashfs_2_0_supported(struct squashfs_sb_info *msblk) -+{ -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ msblk->read_inode = squashfs_read_inode_2; -+ msblk->read_fragment_index_table = read_fragment_index_table_2; -+ -+ sblk->bytes_used = sblk->bytes_used_2; -+ sblk->uid_start = sblk->uid_start_2; -+ sblk->guid_start = sblk->guid_start_2; -+ sblk->inode_table_start = sblk->inode_table_start_2; -+ sblk->directory_table_start = sblk->directory_table_start_2; -+ sblk->fragment_table_start = sblk->fragment_table_start_2; -+ -+ return 1; -+} ---- /dev/null -+++ linux-2.6.24-rc1/fs/squashfs/squashfs.h -@@ -0,0 +1,87 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs.h -+ */ -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+#undef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+#endif -+ -+#ifdef SQUASHFS_TRACE -+#define TRACE(s, args...) printk(KERN_NOTICE "SQUASHFS: "s, ## args) -+#else -+#define TRACE(s, args...) {} -+#endif -+ -+#define ERROR(s, args...) printk(KERN_ERR "SQUASHFS error: "s, ## args) -+ -+#define SERROR(s, args...) do { \ -+ if (!silent) \ -+ printk(KERN_ERR "SQUASHFS error: "s, ## args);\ -+ } while(0) -+ -+#define WARNING(s, args...) printk(KERN_WARNING "SQUASHFS: "s, ## args) -+ -+static inline struct squashfs_inode_info *SQUASHFS_I(struct inode *inode) -+{ -+ return list_entry(inode, struct squashfs_inode_info, vfs_inode); -+} -+ -+#if defined(CONFIG_SQUASHFS_1_0_COMPATIBILITY ) || defined(CONFIG_SQUASHFS_2_0_COMPATIBILITY) -+#define SQSH_EXTERN -+extern unsigned int squashfs_read_data(struct super_block *s, char *buffer, -+ long long index, unsigned int length, -+ long long *next_index, int srclength); -+extern int squashfs_get_cached_block(struct super_block *s, char *buffer, -+ long long block, unsigned int offset, -+ int length, long long *next_block, -+ unsigned int *next_offset); -+extern void release_cached_fragment(struct squashfs_sb_info *msblk, struct -+ squashfs_fragment_cache *fragment); -+extern struct squashfs_fragment_cache *get_cached_fragment(struct super_block -+ *s, long long start_block, -+ int length); -+extern struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode, unsigned int inode_number); -+extern const struct address_space_operations squashfs_symlink_aops; -+extern const struct address_space_operations squashfs_aops; -+extern const struct address_space_operations squashfs_aops_4K; -+extern struct inode_operations squashfs_dir_inode_ops; -+#else -+#define SQSH_EXTERN static -+#endif -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+extern int squashfs_1_0_supported(struct squashfs_sb_info *msblk); -+#else -+static inline int squashfs_1_0_supported(struct squashfs_sb_info *msblk) -+{ -+ return 0; -+} -+#endif -+ -+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+extern int squashfs_2_0_supported(struct squashfs_sb_info *msblk); -+#else -+static inline int squashfs_2_0_supported(struct squashfs_sb_info *msblk) -+{ -+ return 0; -+} -+#endif ---- /dev/null -+++ linux-2.6.24-rc1/include/linux/squashfs_fs.h -@@ -0,0 +1,934 @@ -+#ifndef SQUASHFS_FS -+#define SQUASHFS_FS -+ -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs.h -+ */ -+ -+#ifndef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+#define CONFIG_SQUASHFS_2_0_COMPATIBILITY -+#endif -+ -+#ifdef CONFIG_SQUASHFS_VMALLOC -+#define SQUASHFS_ALLOC(a) vmalloc(a) -+#define SQUASHFS_FREE(a) vfree(a) -+#else -+#define SQUASHFS_ALLOC(a) kmalloc(a, GFP_KERNEL) -+#define SQUASHFS_FREE(a) kfree(a) -+#endif -+#define SQUASHFS_CACHED_FRAGMENTS CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE -+#define SQUASHFS_MAJOR 3 -+#define SQUASHFS_MINOR 0 -+#define SQUASHFS_MAGIC 0x73717368 -+#define SQUASHFS_MAGIC_SWAP 0x68737173 -+#define SQUASHFS_START 0 -+ -+/* size of metadata (inode and directory) blocks */ -+#define SQUASHFS_METADATA_SIZE 8192 -+#define SQUASHFS_METADATA_LOG 13 -+ -+/* default size of data blocks */ -+#define SQUASHFS_FILE_SIZE 65536 -+#define SQUASHFS_FILE_LOG 16 -+ -+#define SQUASHFS_FILE_MAX_SIZE 65536 -+ -+/* Max number of uids and gids */ -+#define SQUASHFS_UIDS 256 -+#define SQUASHFS_GUIDS 255 -+ -+/* Max length of filename (not 255) */ -+#define SQUASHFS_NAME_LEN 256 -+ -+#define SQUASHFS_INVALID ((long long) 0xffffffffffff) -+#define SQUASHFS_INVALID_FRAG ((unsigned int) 0xffffffff) -+#define SQUASHFS_INVALID_BLK ((long long) -1) -+#define SQUASHFS_USED_BLK ((long long) -2) -+ -+/* Filesystem flags */ -+#define SQUASHFS_NOI 0 -+#define SQUASHFS_NOD 1 -+#define SQUASHFS_CHECK 2 -+#define SQUASHFS_NOF 3 -+#define SQUASHFS_NO_FRAG 4 -+#define SQUASHFS_ALWAYS_FRAG 5 -+#define SQUASHFS_DUPLICATE 6 -+#define SQUASHFS_EXPORT 7 -+ -+#define SQUASHFS_BIT(flag, bit) ((flag >> bit) & 1) -+ -+#define SQUASHFS_UNCOMPRESSED_INODES(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOI) -+ -+#define SQUASHFS_UNCOMPRESSED_DATA(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOD) -+ -+#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOF) -+ -+#define SQUASHFS_NO_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NO_FRAG) -+ -+#define SQUASHFS_ALWAYS_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_ALWAYS_FRAG) -+ -+#define SQUASHFS_DUPLICATES(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_DUPLICATE) -+ -+#define SQUASHFS_EXPORTABLE(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_EXPORT) -+ -+#define SQUASHFS_CHECK_DATA(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_CHECK) -+ -+#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, \ -+ duplicate_checking, exortable) (noi | (nod << 1) | (check_data << 2) \ -+ | (nof << 3) | (no_frag << 4) | (always_frag << 5) | \ -+ (duplicate_checking << 6) | (exportable << 7)) -+ -+/* Max number of types and file types */ -+#define SQUASHFS_DIR_TYPE 1 -+#define SQUASHFS_FILE_TYPE 2 -+#define SQUASHFS_SYMLINK_TYPE 3 -+#define SQUASHFS_BLKDEV_TYPE 4 -+#define SQUASHFS_CHRDEV_TYPE 5 -+#define SQUASHFS_FIFO_TYPE 6 -+#define SQUASHFS_SOCKET_TYPE 7 -+#define SQUASHFS_LDIR_TYPE 8 -+#define SQUASHFS_LREG_TYPE 9 -+ -+/* 1.0 filesystem type definitions */ -+#define SQUASHFS_TYPES 5 -+#define SQUASHFS_IPC_TYPE 0 -+ -+/* Flag whether block is compressed or uncompressed, bit is set if block is -+ * uncompressed */ -+#define SQUASHFS_COMPRESSED_BIT (1 << 15) -+ -+#define SQUASHFS_COMPRESSED_SIZE(B) (((B) & ~SQUASHFS_COMPRESSED_BIT) ? \ -+ (B) & ~SQUASHFS_COMPRESSED_BIT : SQUASHFS_COMPRESSED_BIT) -+ -+#define SQUASHFS_COMPRESSED(B) (!((B) & SQUASHFS_COMPRESSED_BIT)) -+ -+#define SQUASHFS_COMPRESSED_BIT_BLOCK (1 << 24) -+ -+#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B) (((B) & \ -+ ~SQUASHFS_COMPRESSED_BIT_BLOCK) ? (B) & \ -+ ~SQUASHFS_COMPRESSED_BIT_BLOCK : SQUASHFS_COMPRESSED_BIT_BLOCK) -+ -+#define SQUASHFS_COMPRESSED_BLOCK(B) (!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK)) -+ -+/* -+ * Inode number ops. Inodes consist of a compressed block number, and an -+ * uncompressed offset within that block -+ */ -+#define SQUASHFS_INODE_BLK(a) ((unsigned int) ((a) >> 16)) -+ -+#define SQUASHFS_INODE_OFFSET(a) ((unsigned int) ((a) & 0xffff)) -+ -+#define SQUASHFS_MKINODE(A, B) ((squashfs_inode_t)(((squashfs_inode_t) (A)\ -+ << 16) + (B))) -+ -+/* Compute 32 bit VFS inode number from squashfs inode number */ -+#define SQUASHFS_MK_VFS_INODE(a, b) ((unsigned int) (((a) << 8) + \ -+ ((b) >> 2) + 1)) -+/* XXX */ -+ -+/* Translate between VFS mode and squashfs mode */ -+#define SQUASHFS_MODE(a) ((a) & 0xfff) -+ -+/* fragment and fragment table defines */ -+#define SQUASHFS_FRAGMENT_BYTES(A) ((A) * sizeof(struct squashfs_fragment_entry)) -+ -+#define SQUASHFS_FRAGMENT_INDEX(A) (SQUASHFS_FRAGMENT_BYTES(A) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A) (SQUASHFS_FRAGMENT_BYTES(A) % \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEXES(A) ((SQUASHFS_FRAGMENT_BYTES(A) + \ -+ SQUASHFS_METADATA_SIZE - 1) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_BYTES(A) (SQUASHFS_FRAGMENT_INDEXES(A) *\ -+ sizeof(long long)) -+ -+/* inode lookup table defines */ -+#define SQUASHFS_LOOKUP_BYTES(A) ((A) * sizeof(squashfs_inode_t)) -+ -+#define SQUASHFS_LOOKUP_BLOCK(A) (SQUASHFS_LOOKUP_BYTES(A) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_LOOKUP_BLOCK_OFFSET(A) (SQUASHFS_LOOKUP_BYTES(A) % \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_LOOKUP_BLOCKS(A) ((SQUASHFS_LOOKUP_BYTES(A) + \ -+ SQUASHFS_METADATA_SIZE - 1) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_LOOKUP_BLOCK_BYTES(A) (SQUASHFS_LOOKUP_BLOCKS(A) *\ -+ sizeof(long long)) -+ -+/* cached data constants for filesystem */ -+#define SQUASHFS_CACHED_BLKS 8 -+ -+#define SQUASHFS_MAX_FILE_SIZE_LOG 64 -+ -+#define SQUASHFS_MAX_FILE_SIZE ((long long) 1 << \ -+ (SQUASHFS_MAX_FILE_SIZE_LOG - 2)) -+ -+#define SQUASHFS_MARKER_BYTE 0xff -+ -+/* meta index cache */ -+#define SQUASHFS_META_INDEXES (SQUASHFS_METADATA_SIZE / sizeof(unsigned int)) -+#define SQUASHFS_META_ENTRIES 31 -+#define SQUASHFS_META_NUMBER 8 -+#define SQUASHFS_SLOTS 4 -+ -+struct meta_entry { -+ long long data_block; -+ unsigned int index_block; -+ unsigned short offset; -+ unsigned short pad; -+}; -+ -+struct meta_index { -+ unsigned int inode_number; -+ unsigned int offset; -+ unsigned short entries; -+ unsigned short skip; -+ unsigned short locked; -+ unsigned short pad; -+ struct meta_entry meta_entry[SQUASHFS_META_ENTRIES]; -+}; -+ -+ -+/* -+ * definitions for structures on disk -+ */ -+ -+typedef long long squashfs_block_t; -+typedef long long squashfs_inode_t; -+ -+struct squashfs_super_block { -+ unsigned int s_magic; -+ unsigned int inodes; -+ unsigned int bytes_used_2; -+ unsigned int uid_start_2; -+ unsigned int guid_start_2; -+ unsigned int inode_table_start_2; -+ unsigned int directory_table_start_2; -+ unsigned int s_major:16; -+ unsigned int s_minor:16; -+ unsigned int block_size_1:16; -+ unsigned int block_log:16; -+ unsigned int flags:8; -+ unsigned int no_uids:8; -+ unsigned int no_guids:8; -+ unsigned int mkfs_time /* time of filesystem creation */; -+ squashfs_inode_t root_inode; -+ unsigned int block_size; -+ unsigned int fragments; -+ unsigned int fragment_table_start_2; -+ long long bytes_used; -+ long long uid_start; -+ long long guid_start; -+ long long inode_table_start; -+ long long directory_table_start; -+ long long fragment_table_start; -+ long long lookup_table_start; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_index { -+ unsigned int index; -+ unsigned int start_block; -+ unsigned char size; -+ unsigned char name[0]; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_BASE_INODE_HEADER \ -+ unsigned int inode_type:4; \ -+ unsigned int mode:12; \ -+ unsigned int uid:8; \ -+ unsigned int guid:8; \ -+ unsigned int mtime; \ -+ unsigned int inode_number; -+ -+struct squashfs_base_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ squashfs_block_t start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ unsigned int file_size; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_lreg_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ squashfs_block_t start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ long long file_size; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int start_block; -+ unsigned int parent_inode; -+} __attribute__ ((packed)); -+ -+struct squashfs_ldir_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned int file_size:27; -+ unsigned int offset:13; -+ unsigned int start_block; -+ unsigned int i_count:16; -+ unsigned int parent_inode; -+ struct squashfs_dir_index index[0]; -+} __attribute__ ((packed)); -+ -+union squashfs_inode_header { -+ struct squashfs_base_inode_header base; -+ struct squashfs_dev_inode_header dev; -+ struct squashfs_symlink_inode_header symlink; -+ struct squashfs_reg_inode_header reg; -+ struct squashfs_lreg_inode_header lreg; -+ struct squashfs_dir_inode_header dir; -+ struct squashfs_ldir_inode_header ldir; -+ struct squashfs_ipc_inode_header ipc; -+}; -+ -+struct squashfs_dir_entry { -+ unsigned int offset:13; -+ unsigned int type:3; -+ unsigned int size:8; -+ int inode_number:16; -+ char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_header { -+ unsigned int count:8; -+ unsigned int start_block; -+ unsigned int inode_number; -+} __attribute__ ((packed)); -+ -+struct squashfs_fragment_entry { -+ long long start_block; -+ unsigned int size; -+ unsigned int pending; -+} __attribute__ ((packed)); -+ -+extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen); -+extern int squashfs_uncompress_init(void); -+extern int squashfs_uncompress_exit(void); -+ -+/* -+ * macros to convert each packed bitfield structure from little endian to big -+ * endian and vice versa. These are needed when creating or using a filesystem -+ * on a machine with different byte ordering to the target architecture. -+ * -+ */ -+ -+#define SQUASHFS_SWAP_START \ -+ int bits;\ -+ int b_pos;\ -+ unsigned long long val;\ -+ unsigned char *s;\ -+ unsigned char *d; -+ -+#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_super_block));\ -+ SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->inodes, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->bytes_used_2, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->uid_start_2, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->guid_start_2, d, 128, 32);\ -+ SQUASHFS_SWAP((s)->inode_table_start_2, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->directory_table_start_2, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->s_major, d, 224, 16);\ -+ SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\ -+ SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\ -+ SQUASHFS_SWAP((s)->block_log, d, 272, 16);\ -+ SQUASHFS_SWAP((s)->flags, d, 288, 8);\ -+ SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\ -+ SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\ -+ SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\ -+ SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\ -+ SQUASHFS_SWAP((s)->block_size, d, 408, 32);\ -+ SQUASHFS_SWAP((s)->fragments, d, 440, 32);\ -+ SQUASHFS_SWAP((s)->fragment_table_start_2, d, 472, 32);\ -+ SQUASHFS_SWAP((s)->bytes_used, d, 504, 64);\ -+ SQUASHFS_SWAP((s)->uid_start, d, 568, 64);\ -+ SQUASHFS_SWAP((s)->guid_start, d, 632, 64);\ -+ SQUASHFS_SWAP((s)->inode_table_start, d, 696, 64);\ -+ SQUASHFS_SWAP((s)->directory_table_start, d, 760, 64);\ -+ SQUASHFS_SWAP((s)->fragment_table_start, d, 824, 64);\ -+ SQUASHFS_SWAP((s)->lookup_table_start, d, 888, 64);\ -+} -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->guid, d, 24, 8);\ -+ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 64, 32); -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_ipc_inode_header))\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_dev_inode_header)); \ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->rdev, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_reg_inode_header));\ -+ SQUASHFS_SWAP((s)->start_block, d, 96, 64);\ -+ SQUASHFS_SWAP((s)->fragment, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 224, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LREG_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_lreg_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 128, 64);\ -+ SQUASHFS_SWAP((s)->fragment, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 224, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 256, 64);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_dir_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 128, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 147, 13);\ -+ SQUASHFS_SWAP((s)->start_block, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->parent_inode, d, 192, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LDIR_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_ldir_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 128, 27);\ -+ SQUASHFS_SWAP((s)->offset, d, 155, 13);\ -+ SQUASHFS_SWAP((s)->start_block, d, 168, 32);\ -+ SQUASHFS_SWAP((s)->i_count, d, 200, 16);\ -+ SQUASHFS_SWAP((s)->parent_inode, d, 216, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INDEX(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index));\ -+ SQUASHFS_SWAP((s)->index, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->size, d, 64, 8);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header));\ -+ SQUASHFS_SWAP((s)->count, d, 0, 8);\ -+ SQUASHFS_SWAP((s)->start_block, d, 8, 32);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 40, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry));\ -+ SQUASHFS_SWAP((s)->offset, d, 0, 13);\ -+ SQUASHFS_SWAP((s)->type, d, 13, 3);\ -+ SQUASHFS_SWAP((s)->size, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry));\ -+ SQUASHFS_SWAP((s)->start_block, d, 0, 64);\ -+ SQUASHFS_SWAP((s)->size, d, 64, 32);\ -+} -+ -+#define SQUASHFS_SWAP_INODE_T(s, d) SQUASHFS_SWAP_LONG_LONGS(s, d, 1) -+ -+#define SQUASHFS_SWAP_SHORTS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 2);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 16)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 16);\ -+} -+ -+#define SQUASHFS_SWAP_INTS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 4);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 32)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LONG_LONGS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 8);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 64)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 64);\ -+} -+ -+#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * bits / 8);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ bits)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, bits);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n) -+#define SQUASHFS_SWAP_LOOKUP_BLOCKS(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n) -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+ -+struct squashfs_base_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int type:4; -+ unsigned int offset:4; -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int mtime; -+ unsigned int start_block; -+ unsigned int file_size:32; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n) \ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 4);\ -+ SQUASHFS_SWAP((s)->guid, d, 20, 4); -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_ipc_inode_header_1));\ -+ SQUASHFS_SWAP((s)->type, d, 24, 4);\ -+ SQUASHFS_SWAP((s)->offset, d, 28, 4);\ -+} -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_dev_inode_header_1));\ -+ SQUASHFS_SWAP((s)->rdev, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header_1));\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_reg_inode_header_1));\ -+ SQUASHFS_SWAP((s)->mtime, d, 24, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 56, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 88, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_dir_inode_header_1));\ -+ SQUASHFS_SWAP((s)->file_size, d, 24, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 43, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 56, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 88, 24);\ -+} -+ -+#endif -+ -+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+ -+struct squashfs_dir_index_2 { -+ unsigned int index:27; -+ unsigned int start_block:29; -+ unsigned char size; -+ unsigned char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_base_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int mtime; -+ unsigned int start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ unsigned int file_size:32; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+struct squashfs_ldir_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int file_size:27; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+ unsigned int i_count:16; -+ struct squashfs_dir_index_2 index[0]; -+} __attribute__ ((packed)); -+ -+union squashfs_inode_header_2 { -+ struct squashfs_base_inode_header_2 base; -+ struct squashfs_dev_inode_header_2 dev; -+ struct squashfs_symlink_inode_header_2 symlink; -+ struct squashfs_reg_inode_header_2 reg; -+ struct squashfs_dir_inode_header_2 dir; -+ struct squashfs_ldir_inode_header_2 ldir; -+ struct squashfs_ipc_inode_header_2 ipc; -+}; -+ -+struct squashfs_dir_header_2 { -+ unsigned int count:8; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_entry_2 { -+ unsigned int offset:13; -+ unsigned int type:3; -+ unsigned int size:8; -+ char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_fragment_entry_2 { -+ unsigned int start_block; -+ unsigned int size; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->guid, d, 24, 8);\ -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER_2(s, d) \ -+ SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, sizeof(struct squashfs_ipc_inode_header_2)) -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_dev_inode_header_2)); \ -+ SQUASHFS_SWAP((s)->rdev, d, 32, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header_2));\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_reg_inode_header_2));\ -+ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->fragment, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 128, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 160, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_dir_inode_header_2));\ -+ SQUASHFS_SWAP((s)->file_size, d, 32, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 51, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 96, 24);\ -+} -+ -+#define SQUASHFS_SWAP_LDIR_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_ldir_inode_header_2));\ -+ SQUASHFS_SWAP((s)->file_size, d, 32, 27);\ -+ SQUASHFS_SWAP((s)->offset, d, 59, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 72, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 104, 24);\ -+ SQUASHFS_SWAP((s)->i_count, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INDEX_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index_2));\ -+ SQUASHFS_SWAP((s)->index, d, 0, 27);\ -+ SQUASHFS_SWAP((s)->start_block, d, 27, 29);\ -+ SQUASHFS_SWAP((s)->size, d, 56, 8);\ -+} -+#define SQUASHFS_SWAP_DIR_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header_2));\ -+ SQUASHFS_SWAP((s)->count, d, 0, 8);\ -+ SQUASHFS_SWAP((s)->start_block, d, 8, 24);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_ENTRY_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry_2));\ -+ SQUASHFS_SWAP((s)->offset, d, 0, 13);\ -+ SQUASHFS_SWAP((s)->type, d, 13, 3);\ -+ SQUASHFS_SWAP((s)->size, d, 16, 8);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_ENTRY_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry_2));\ -+ SQUASHFS_SWAP((s)->start_block, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->size, d, 32, 32);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_INDEXES_2(s, d, n) SQUASHFS_SWAP_INTS(s, d, n) -+ -+/* fragment and fragment table defines */ -+#define SQUASHFS_FRAGMENT_BYTES_2(A) (A * sizeof(struct squashfs_fragment_entry_2)) -+ -+#define SQUASHFS_FRAGMENT_INDEX_2(A) (SQUASHFS_FRAGMENT_BYTES_2(A) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_OFFSET_2(A) (SQUASHFS_FRAGMENT_BYTES_2(A) % \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEXES_2(A) ((SQUASHFS_FRAGMENT_BYTES_2(A) + \ -+ SQUASHFS_METADATA_SIZE - 1) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_BYTES_2(A) (SQUASHFS_FRAGMENT_INDEXES_2(A) *\ -+ sizeof(int)) -+ -+#endif -+ -+#ifdef __KERNEL__ -+ -+/* -+ * macros used to swap each structure entry, taking into account -+ * bitfields and different bitfield placing conventions on differing -+ * architectures -+ */ -+ -+#include -+ -+#ifdef __BIG_ENDIAN -+ /* convert from little endian to big endian */ -+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \ -+ tbits, b_pos) -+#else -+ /* convert from big endian to little endian */ -+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \ -+ tbits, 64 - tbits - b_pos) -+#endif -+ -+#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\ -+ b_pos = pos % 8;\ -+ val = 0;\ -+ s = (unsigned char *)p + (pos / 8);\ -+ d = ((unsigned char *) &val) + 7;\ -+ for(bits = 0; bits < (tbits + b_pos); bits += 8) \ -+ *d-- = *s++;\ -+ value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\ -+} -+ -+#define SQUASHFS_MEMSET(s, d, n) memset(s, 0, n); -+ -+#endif -+#endif ---- /dev/null -+++ linux-2.6.24-rc1/include/linux/squashfs_fs_i.h -@@ -0,0 +1,45 @@ -+#ifndef SQUASHFS_FS_I -+#define SQUASHFS_FS_I -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs_i.h -+ */ -+ -+struct squashfs_inode_info { -+ long long start_block; -+ unsigned int offset; -+ union { -+ struct { -+ long long fragment_start_block; -+ unsigned int fragment_size; -+ unsigned int fragment_offset; -+ long long block_list_start; -+ } s1; -+ struct { -+ long long directory_index_start; -+ unsigned int directory_index_offset; -+ unsigned int directory_index_count; -+ unsigned int parent_inode; -+ } s2; -+ } u; -+ struct inode vfs_inode; -+}; -+#endif ---- /dev/null -+++ linux-2.6.24-rc1/include/linux/squashfs_fs_sb.h -@@ -0,0 +1,74 @@ -+#ifndef SQUASHFS_FS_SB -+#define SQUASHFS_FS_SB -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs_sb.h -+ */ -+ -+#include -+ -+struct squashfs_cache { -+ long long block; -+ int length; -+ long long next_index; -+ char *data; -+}; -+ -+struct squashfs_fragment_cache { -+ long long block; -+ int length; -+ unsigned int locked; -+ char *data; -+}; -+ -+struct squashfs_sb_info { -+ struct squashfs_super_block sblk; -+ int devblksize; -+ int devblksize_log2; -+ int swap; -+ struct squashfs_cache *block_cache; -+ struct squashfs_fragment_cache *fragment; -+ int next_cache; -+ int next_fragment; -+ int next_meta_index; -+ unsigned int *uid; -+ unsigned int *guid; -+ long long *fragment_index; -+ unsigned int *fragment_index_2; -+ char *read_page; -+ struct mutex read_data_mutex; -+ struct mutex read_page_mutex; -+ struct mutex block_cache_mutex; -+ struct mutex fragment_mutex; -+ struct mutex meta_index_mutex; -+ wait_queue_head_t waitq; -+ wait_queue_head_t fragment_wait_queue; -+ struct meta_index *meta_index; -+ z_stream stream; -+ long long *inode_lookup_table; -+ int (*read_inode)(struct inode *i, squashfs_inode_t \ -+ inode); -+ long long (*read_blocklist)(struct inode *inode, int \ -+ index, int readahead_blks, char *block_list, \ -+ unsigned short **block_p, unsigned int *bsize); -+ int (*read_fragment_index_table)(struct super_block *s); -+}; -+#endif ---- linux-2.6.24-rc1.orig/init/do_mounts_rd.c -+++ linux-2.6.24-rc1/init/do_mounts_rd.c -@@ -5,6 +5,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -39,6 +40,7 @@ - * numbers could not be found. - * - * We currently check for the following magic numbers: -+ * squashfs - * minix - * ext2 - * romfs -@@ -53,6 +55,7 @@ - struct ext2_super_block *ext2sb; - struct romfs_super_block *romfsb; - struct cramfs_super *cramfsb; -+ struct squashfs_super_block *squashfsb; - int nblocks = -1; - unsigned char *buf; - -@@ -64,6 +67,7 @@ - ext2sb = (struct ext2_super_block *) buf; - romfsb = (struct romfs_super_block *) buf; - cramfsb = (struct cramfs_super *) buf; -+ squashfsb = (struct squashfs_super_block *) buf; - memset(buf, 0xe5, size); - - /* -@@ -101,6 +105,18 @@ - goto done; - } - -+ /* squashfs is at block zero too */ -+ if (squashfsb->s_magic == SQUASHFS_MAGIC) { -+ printk(KERN_NOTICE -+ "RAMDISK: squashfs filesystem found at block %d\n", -+ start_block); -+ if (squashfsb->s_major < 3) -+ nblocks = (squashfsb->bytes_used_2+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS; -+ else -+ nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS; -+ goto done; -+ } -+ - /* - * Read block 1 to test for minix and ext2 superblock - */ diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/uvesafb-0.1-rc3-2.6.22.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/uvesafb-0.1-rc3-2.6.22.patch deleted file mode 100644 index 711375114f..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc1/uvesafb-0.1-rc3-2.6.22.patch +++ /dev/null @@ -1,2590 +0,0 @@ ---- - Documentation/fb/uvesafb.txt | 188 +++ - drivers/video/Kconfig | 18 - drivers/video/Makefile | 1 - drivers/video/modedb.c | 28 - drivers/video/uvesafb.c | 2058 +++++++++++++++++++++++++++++++++++++++++++ - include/linux/connector.h | 7 - include/video/Kbuild | 2 - include/video/uvesafb.h | 193 ++++ - 8 files changed, 2479 insertions(+), 16 deletions(-) - -Index: linux-2.6.22/Documentation/fb/uvesafb.txt -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/Documentation/fb/uvesafb.txt 2007-08-28 21:56:34.000000000 +0100 -@@ -0,0 +1,188 @@ -+ -+uvesafb - A Generic Driver for VBE2+ compliant video cards -+========================================================== -+ -+1. Requirements -+--------------- -+ -+uvesafb should work with any video card that has a Video BIOS compliant -+with the VBE 2.0 standard. -+ -+Unlike other drivers, uvesafb makes use of a userspace helper called -+v86d. v86d is used to run the x86 Video BIOS code in a simulated and -+controlled environment. This allows uvesafb to function on arches other -+than x86. Check the v86d documentation for a list of currently supported -+arches. -+ -+v86d source code can be downloaded from the following website: -+ http://dev.gentoo.org/~spock/projects/uvesafb -+ -+Please refer to the v86d documentation for detailed configuration and -+installation instructions. -+ -+Note that the v86d userspace helper has to be available at all times in -+order for uvesafb to work properly. If you want to use uvesafb during -+early boot, you will have to include v86d into an initramfs image, and -+either compile it into the kernel or use it as an initrd. -+ -+2. Caveats and limitations -+-------------------------- -+ -+uvesafb is a _generic_ driver which supports a wide variety of video -+cards, but which is ultimately limited by the Video BIOS interface. -+The most important limitations are: -+ -+- Lack of any type of acceleration. -+- A strict and limited set of supported video modes. Often the native -+ or most optimal resolution/refresh rate for your setup will not work -+ with uvesafb, simply because the Video BIOS doesn't support the -+ video mode you want to use. This can be especially painful with -+ widescreen panels, where native video modes don't have the 4:3 aspect -+ ratio, which is what most BIOS-es are limited to. -+- Adjusting the refresh rate is only possible with a VBE 3.0 compliant -+ Video BIOS. Note that many nVidia Video BIOS-es claim to be VBE 3.0 -+ compliant, while they simply ignore any refresh rate settings. -+ -+3. Configuration -+---------------- -+ -+uvesafb can be compiled either as a module, or directly into the kernel. -+In both cases it supports the same set of configuration options, which -+are either given on the kernel command line or as module parameters, e.g.: -+ -+ video=uvesafb:1024x768-32,mtrr:3,ywrap (compiled into the kernel) -+ -+ # modprobe uvesafb mode=1024x768-32 mtrr=3 scroll=ywrap (module) -+ -+Accepted options: -+ -+ypan Enable display panning using the VESA protected mode -+ interface. The visible screen is just a window of the -+ video memory, console scrolling is done by changing the -+ start of the window. Available on x86 only. -+ -+ywrap Same as ypan, but assumes your gfx board can wrap-around -+ the video memory (i.e. starts reading from top if it -+ reaches the end of video memory). Faster than ypan. -+ Available on x86 only. -+ -+redraw Scroll by redrawing the affected part of the screen, this -+ is the safe (and slow) default. -+ -+(If you're using uvesafb as a module, the above three options are -+ used a parameter of the scroll option, e.g. scroll=ypan.) -+ -+vgapal Use the standard VGA registers for palette changes. -+ -+pmipal Use the protected mode interface for palette changes. -+ This is the default if the protected mode interface is -+ available. Available on x86 only. -+ -+mtrr:n Setup memory type range registers for the framebuffer -+ where n: -+ 0 - disabled (equivalent to nomtrr) (default) -+ 1 - uncachable -+ 2 - write-back -+ 3 - write-combining -+ 4 - write-through -+ -+ If you see the following in dmesg, choose the type that matches -+ the old one. In this example, use "mtrr:2". -+... -+mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining -+... -+ -+nomtrr Do not use memory type range registers. -+ -+vremap:n -+ Remap 'n' MiB of video RAM. If 0 or not specified, remap memory -+ according to video mode. -+ -+vtotal:n -+ If the video BIOS of your card incorrectly determines the total -+ amount of video RAM, use this option to override the BIOS (in MiB). -+ -+ The mode you want to set, in the standard modedb format. Refer to -+ modedb.txt for a detailed description. When uvesafb is compiled as -+ a module, the mode string should be provided as a value of the -+ 'mode' option. -+ -+vbemode:x -+ Force the use of VBE mode x. The mode will only be set if it's -+ found in the VBE-provided list of supported modes. -+ NOTE: The mode number 'x' should be specified in VESA mode number -+ notation, not the Linux kernel one (eg. 257 instead of 769). -+ HINT: If you use this option because normal parameter does -+ not work for you and you use a X server, you'll probably want to -+ set the 'nocrtc' option to ensure that the video mode is properly -+ restored after console <-> X switches. -+ -+nocrtc Do not use CRTC timings while setting the video mode. This option -+ has any effect only if the Video BIOS is VBE 3.0 compliant. Use it -+ if you have problems with modes set the standard way. Note that -+ using this option implies that any refresh rate adjustments will -+ be ignored and the refresh rate will stay at your BIOS default (60 Hz). -+ -+noedid Do not try to fetch and use EDID-provided modes. -+ -+noblank Disable hardware blanking. -+ -+v86d:path -+ Set path to the v86d executable. This option is only available as -+ a module parameter, and not as a part of the video= string. If you -+ need to use it and have uvesafb built into the kernel, use -+ uvesafb.v86d="path". -+ -+Additionally, the following parameters may be provided. They all override the -+EDID-provided values and BIOS defaults. Refer to your monitor's specs to get -+the correct values for maxhf, maxvf and maxclk for your hardware. -+ -+maxhf:n Maximum horizontal frequency (in kHz). -+maxvf:n Maximum vertical frequency (in Hz). -+maxclk:n Maximum pixel clock (in MHz). -+ -+4. The sysfs interface -+---------------------- -+ -+uvesafb provides several sysfs nodes for configurable parameters and -+additional information. -+ -+Driver attributes: -+ -+/sys/bus/platform/drivers/uvesafb -+ - v86d (default: /sbin/v86d) -+ Path to the v86d executable. v86d is started by uvesafb -+ if an instance of the daemon isn't already running. -+ -+Device attributes: -+ -+/sys/bus/platform/drivers/uvesafb/uvesafb.0 -+ - nocrtc -+ Use the default refresh rate (60 Hz) if set to 1. -+ -+ - oem_product_name -+ - oem_product_rev -+ - oem_string -+ - oem_vendor -+ Information about the card and its maker. -+ -+ - vbe_modes -+ A list of video modes supported by the Video BIOS along with their -+ VBE mode numbers in hex. -+ -+ - vbe_version -+ A BCD value indicating the implemented VBE standard. -+ -+5. Miscellaneous -+---------------- -+ -+Uvesafb will set a video mode with the default refresh rate and timings -+from the Video BIOS if you set pixclock to 0 in fb_var_screeninfo. -+ -+ -+-- -+ Michal Januszewski -+ Last updated: 2007-06-16 -+ -+ Documentation of the uvesafb options is loosely based on vesafb.txt. -+ -Index: linux-2.6.22/drivers/video/Kconfig -=================================================================== ---- linux-2.6.22.orig/drivers/video/Kconfig 2007-08-28 21:56:33.000000000 +0100 -+++ linux-2.6.22/drivers/video/Kconfig 2007-08-28 21:56:34.000000000 +0100 -@@ -592,6 +592,24 @@ config FB_TGA - - Say Y if you have one of those. - -+config FB_UVESA -+ tristate "Userspace VESA VGA graphics support" -+ depends on FB && CONNECTOR -+ select FB_CFB_FILLRECT -+ select FB_CFB_COPYAREA -+ select FB_CFB_IMAGEBLIT -+ select FB_MODE_HELPERS -+ help -+ This is the frame buffer driver for generic VBE 2.0 compliant -+ graphic cards. It can also take advantage of VBE 3.0 features, -+ such as refresh rate adjustment. -+ -+ This driver generally provides more features than vesafb but -+ requires a userspace helper application called 'v86d'. See -+ for more information. -+ -+ If unsure, say N. -+ - config FB_VESA - bool "VESA VGA graphics support" - depends on (FB = y) && X86 -Index: linux-2.6.22/drivers/video/Makefile -=================================================================== ---- linux-2.6.22.orig/drivers/video/Makefile 2007-08-28 21:56:33.000000000 +0100 -+++ linux-2.6.22/drivers/video/Makefile 2007-08-28 21:56:34.000000000 +0100 -@@ -116,6 +116,7 @@ obj-$(CONFIG_FB_XILINX) += xil - obj-$(CONFIG_FB_OMAP) += omap/ - - # Platform or fallback drivers go here -+obj-$(CONFIG_FB_UVESA) += uvesafb.o - obj-$(CONFIG_FB_VESA) += vesafb.o - obj-$(CONFIG_FB_IMAC) += imacfb.o - obj-$(CONFIG_FB_VGA16) += vga16fb.o -Index: linux-2.6.22/drivers/video/modedb.c -=================================================================== ---- linux-2.6.22.orig/drivers/video/modedb.c 2007-08-28 21:54:13.000000000 +0100 -+++ linux-2.6.22/drivers/video/modedb.c 2007-08-28 21:56:34.000000000 +0100 -@@ -606,26 +606,29 @@ done: - DPRINTK("Trying specified video mode%s %ix%i\n", - refresh_specified ? "" : " (ignoring refresh rate)", xres, yres); - -- diff = refresh; -+ if (!refresh_specified) -+ diff = 0; -+ else -+ diff = refresh; -+ - best = -1; - for (i = 0; i < dbsize; i++) { -- if (name_matches(db[i], name, namelen) || -- (res_specified && res_matches(db[i], xres, yres))) { -- if(!fb_try_mode(var, info, &db[i], bpp)) { -- if(!refresh_specified || db[i].refresh == refresh) -- return 1; -- else { -- if(diff > abs(db[i].refresh - refresh)) { -- diff = abs(db[i].refresh - refresh); -- best = i; -- } -+ if ((name_matches(db[i], name, namelen) || -+ (res_specified && res_matches(db[i], xres, yres))) && -+ !fb_try_mode(var, info, &db[i], bpp)) { -+ if (refresh_specified && db[i].refresh == refresh) { -+ return 1; -+ } else { -+ if (diff < db[i].refresh) { -+ diff = db[i].refresh; -+ best = i; - } - } - } - } - if (best != -1) { - fb_try_mode(var, info, &db[best], bpp); -- return 2; -+ return (refresh_specified) ? 2 : 1; - } - - diff = xres + yres; -@@ -938,6 +941,7 @@ void fb_destroy_modelist(struct list_hea - kfree(pos); - } - } -+EXPORT_SYMBOL_GPL(fb_destroy_modelist); - - /** - * fb_videomode_to_modelist: convert mode array to mode list -Index: linux-2.6.22/drivers/video/uvesafb.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/drivers/video/uvesafb.c 2007-08-28 21:56:34.000000000 +0100 -@@ -0,0 +1,2058 @@ -+/* -+ * A framebuffer driver for VBE 2.0+ compliant video cards -+ * -+ * (c) 2007 Michal Januszewski -+ * Loosely based upon the vesafb driver. -+ * -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include