From 2722168adac62cd18b58167499223d5ca941d749 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 25 Jan 2008 00:20:58 +0000 Subject: linux-rp: Update to 2.6.24 git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3595 311d38ba-8fff-0310-9ca6-ca027cbcb966 --- .../binutils-buildid-arm.patch | 16 - .../connectplus-prevent-oops-HACK.patch | 17 - .../connectplus-remove-ide-HACK.patch | 12 - .../linux-rp-2.6.23+2.6.24-rc8/defconfig-akita | 1740 - .../linux-rp-2.6.23+2.6.24-rc8/defconfig-bootcdx86 | 1994 -- .../linux-rp-2.6.23+2.6.24-rc8/defconfig-c7x0 | 1746 - .../linux-rp-2.6.23+2.6.24-rc8/defconfig-collie | 1436 - .../defconfig-htcuniversal | 1307 - .../linux-rp-2.6.23+2.6.24-rc8/defconfig-hx2000 | 1733 - .../linux-rp-2.6.23+2.6.24-rc8/defconfig-poodle | 1756 - .../linux-rp-2.6.23+2.6.24-rc8/defconfig-qemuarm | 1582 - .../linux-rp-2.6.23+2.6.24-rc8/defconfig-qemux86 | 1993 -- .../linux-rp-2.6.23+2.6.24-rc8/defconfig-spitz | 1740 - .../linux-rp-2.6.23+2.6.24-rc8/defconfig-zylonite | 1740 - .../hostap-monitor-mode.patch | 209 - .../linux-rp-2.6.23+2.6.24-rc8/htcuni-acx.patch | 33527 ------------------- .../linux/linux-rp-2.6.23+2.6.24-rc8/htcuni.patch | 7928 ----- .../pxa-serial-hack.patch | 90 - .../pxa_fb_overlay.patch | 26 - ...t-for-non-standard-xtals-to-16c950-driver.patch | 155 - .../linux-rp-2.6.23+2.6.24-rc8/squashfs3.3.patch | 4234 --- .../versatile-armv6.patch | 19 - .../linux-rp-2.6.23+2.6.24-rc8/zylonite-boot.patch | 45 - .../linux-rp-2.6.24/binutils-buildid-arm.patch | 16 + .../connectplus-prevent-oops-HACK.patch | 17 + .../connectplus-remove-ide-HACK.patch | 12 + .../packages/linux/linux-rp-2.6.24/defconfig-akita | 1740 + .../linux/linux-rp-2.6.24/defconfig-bootcdx86 | 1994 ++ meta/packages/linux/linux-rp-2.6.24/defconfig-c7x0 | 1746 + .../linux/linux-rp-2.6.24/defconfig-collie | 1436 + .../linux/linux-rp-2.6.24/defconfig-htcuniversal | 1307 + .../linux/linux-rp-2.6.24/defconfig-hx2000 | 1733 + .../linux/linux-rp-2.6.24/defconfig-poodle | 1756 + .../linux/linux-rp-2.6.24/defconfig-qemuarm | 1582 + .../linux/linux-rp-2.6.24/defconfig-qemux86 | 1993 ++ .../packages/linux/linux-rp-2.6.24/defconfig-spitz | 1740 + .../linux/linux-rp-2.6.24/defconfig-zylonite | 1740 + .../linux-rp-2.6.24/hostap-monitor-mode.patch | 209 + .../linux/linux-rp-2.6.24/htcuni-acx.patch | 33527 +++++++++++++++++++ meta/packages/linux/linux-rp-2.6.24/htcuni.patch | 7928 +++++ .../linux/linux-rp-2.6.24/pxa-serial-hack.patch | 90 + .../linux/linux-rp-2.6.24/pxa_fb_overlay.patch | 26 + ...t-for-non-standard-xtals-to-16c950-driver.patch | 155 + .../linux/linux-rp-2.6.24/squashfs3.3.patch | 4234 +++ .../linux/linux-rp-2.6.24/versatile-armv6.patch | 19 + .../linux/linux-rp-2.6.24/zylonite-boot.patch | 45 + meta/packages/linux/linux-rp_2.6.23+2.6.24-rc8.bb | 146 - meta/packages/linux/linux-rp_2.6.24.bb | 146 + 48 files changed, 65191 insertions(+), 65191 deletions(-) delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/binutils-buildid-arm.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/connectplus-prevent-oops-HACK.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/connectplus-remove-ide-HACK.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-akita delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-bootcdx86 delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-c7x0 delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-collie delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-htcuniversal delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-hx2000 delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-poodle delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-qemuarm delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-qemux86 delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-spitz delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-zylonite delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/hostap-monitor-mode.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/htcuni-acx.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/htcuni.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/pxa-serial-hack.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/pxa_fb_overlay.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/squashfs3.3.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/versatile-armv6.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/zylonite-boot.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/binutils-buildid-arm.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/connectplus-prevent-oops-HACK.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/connectplus-remove-ide-HACK.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-akita create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-bootcdx86 create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-c7x0 create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-collie create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-htcuniversal create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-hx2000 create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-poodle create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-qemuarm create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-qemux86 create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-spitz create mode 100644 meta/packages/linux/linux-rp-2.6.24/defconfig-zylonite create mode 100644 meta/packages/linux/linux-rp-2.6.24/hostap-monitor-mode.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/htcuni-acx.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/htcuni.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/pxa-serial-hack.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/pxa_fb_overlay.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/squashfs3.3.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/versatile-armv6.patch create mode 100644 meta/packages/linux/linux-rp-2.6.24/zylonite-boot.patch delete mode 100644 meta/packages/linux/linux-rp_2.6.23+2.6.24-rc8.bb create mode 100644 meta/packages/linux/linux-rp_2.6.24.bb diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/binutils-buildid-arm.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/binutils-buildid-arm.patch deleted file mode 100644 index 68e35e89e1..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/binutils-buildid-arm.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- - arch/arm/kernel/vmlinux.lds.S | 1 + - 1 file changed, 1 insertion(+) - -Index: linux-2.6.22/arch/arm/kernel/vmlinux.lds.S -=================================================================== ---- linux-2.6.22.orig/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:32:29.000000000 +0200 -+++ linux-2.6.22/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:33:42.000000000 +0200 -@@ -94,6 +94,7 @@ - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT -+ *(.note.*) - #ifdef CONFIG_MMU - *(.fixup) - #endif diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/connectplus-prevent-oops-HACK.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/connectplus-prevent-oops-HACK.patch deleted file mode 100644 index b5439c62e7..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/connectplus-prevent-oops-HACK.patch +++ /dev/null @@ -1,17 +0,0 @@ -Index: linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c -=================================================================== ---- linux-2.6.21.orig/drivers/net/wireless/hostap/hostap_hw.c 2007-07-07 12:45:39.000000000 +0100 -+++ linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c 2007-07-07 12:47:30.000000000 +0100 -@@ -2666,6 +2666,12 @@ - iface = netdev_priv(dev); - local = iface->local; - -+ if(dev->base_addr == 0) -+ { -+ printk(KERN_DEBUG "%s: IRQ before base_addr set\n", dev->name); -+ return IRQ_HANDLED; -+ } -+ - prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); - - if (local->func->card_present && !local->func->card_present(local)) { diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/connectplus-remove-ide-HACK.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/connectplus-remove-ide-HACK.patch deleted file mode 100644 index 4414b21191..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/connectplus-remove-ide-HACK.patch +++ /dev/null @@ -1,12 +0,0 @@ -Index: linux-2.6.13/drivers/ide/legacy/ide-cs.c -=================================================================== ---- linux-2.6.13.orig/drivers/ide/legacy/ide-cs.c 2005-09-01 22:43:46.000000000 +0100 -+++ linux-2.6.13/drivers/ide/legacy/ide-cs.c 2005-09-01 22:45:46.000000000 +0100 -@@ -488,7 +488,6 @@ - PCMCIA_DEVICE_PROD_ID123("KODAK Picture Card ", "KODAK ", "V100K", 0x94a0d8f3, 0xe4fc3ea0, 0xe5e7eed4), - PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), - PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), -- PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), - PCMCIA_DEVICE_NULL, - }; - MODULE_DEVICE_TABLE(pcmcia, ide_ids); diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-akita b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-akita deleted file mode 100644 index 381fafbb25..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-akita +++ /dev/null @@ -1,1740 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 18:29:33 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx/PXA3xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_EM_X270 is not set -# CONFIG_MACH_ZYLONITE is not set -# CONFIG_MACH_ARMCORE is not set -# CONFIG_PXA_SHARPSL_25x is not set -CONFIG_PXA_SHARPSL_27x=y -# CONFIG_MACH_HX2750 is not set -CONFIG_MACH_AKITA=y -CONFIG_MACH_SPITZ=y -CONFIG_MACH_BORZOI=y -CONFIG_PXA27x=y -CONFIG_PXA_SHARP_Cxx00=y -CONFIG_PXA_SSP=y -# CONFIG_PXA_KEYS is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_IWMMXT=y -CONFIG_XSCALE_PMU=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARPSL_PM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=m - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set -# CONFIG_KSDAZZLE_DONGLE is not set -# CONFIG_KS959_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -# CONFIG_BT_HCIBTSDIO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=y -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_LIBERTAS is not set -CONFIG_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_ATMEL is not set -CONFIG_AIRO_CS=m -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_CORGI is not set -CONFIG_KEYBOARD_SPITZ=y -# CONFIG_KEYBOARD_PXA27x is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_CORGI=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -CONFIG_USB_DSBR=m -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -CONFIG_FB_PXA_LCD_QVGA=y -# CONFIG_FB_PXA_LCD_VGA is not set -CONFIG_FB_PXA_OVERLAY=y -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_W100 is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_SEQUENCER_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_AC97_CODEC is not set -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -CONFIG_SND_PXA2XX_PCM=m -CONFIG_SND_PXA2XX_AC97=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -# CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_I2S=m -CONFIG_SND_PXA2XX_SOC_SPITZ=m - -# -# SoC Audio support for SuperH -# -CONFIG_SND_SOC_WM8750=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -# CONFIG_AC97_BUS is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_M66592 is not set -CONFIG_USB_GADGET_PXA27X=y -CONFIG_USB_PXA27X=m -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_PXA=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_SPITZ=y -# CONFIG_LEDS_TOSA is not set -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-bootcdx86 b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-bootcdx86 deleted file mode 100644 index 0d7c289f37..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-bootcdx86 +++ /dev/null @@ -1,1994 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 18:34:58 2008 -# -# CONFIG_64BIT is not set -CONFIG_X86_32=y -# CONFIG_X86_64 is not set -CONFIG_X86=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_MMU=y -CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_DMI=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME_VSYSCALL is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -# CONFIG_ZONE_DMA32 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_AUDIT_ARCH is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -CONFIG_KTIME_SCALAR=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_AUDIT_TREE=y -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor type and features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_SMP=y -CONFIG_X86_PC=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_VOYAGER is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_BIGSMP is not set -# CONFIG_X86_VISWS is not set -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_ES7000 is not set -# CONFIG_X86_VSMP is not set -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_PARAVIRT_GUEST is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -CONFIG_M686=y -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MGEODEGX1 is not set -# CONFIG_MGEODE_LX is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_MVIAC7 is not set -# CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -# CONFIG_GENERIC_CPU is not set -CONFIG_X86_GENERIC=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 -CONFIG_X86_XADD=y -CONFIG_X86_PPRO_FENCE=y -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_INTEL_USERCOPY=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_TSC=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=4 -CONFIG_HPET_TIMER=y -CONFIG_NR_CPUS=8 -CONFIG_SCHED_SMT=y -CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_NONFATAL=y -CONFIG_X86_MCE_P4THERMAL=y -CONFIG_VM86=y -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_X86_REBOOTFIXUPS is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_2G_OPT is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_X86_PAE is not set -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_NR_QUICK=1 -CONFIG_VIRT_TO_BUS=y -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_EFI is not set -CONFIG_IRQBALANCE=y -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_KEXEC=y -CONFIG_PHYSICAL_START=0x100000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -CONFIG_HOTPLUG_CPU=y -CONFIG_COMPAT_VDSO=y - -# -# Power management options -# -CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP_SMP=y -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_SMP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_HIBERNATION_SMP_POSSIBLE=y -# CONFIG_HIBERNATION is not set -CONFIG_ACPI=y -CONFIG_ACPI_SLEEP=y -# CONFIG_ACPI_PROCFS is not set -CONFIG_ACPI_PROCFS_POWER=y -CONFIG_ACPI_SYSFS_POWER=y -CONFIG_ACPI_PROC_EVENT=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -# CONFIG_ACPI_VIDEO is not set -CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_THERMAL=y -# CONFIG_ACPI_ASUS is not set -# CONFIG_ACPI_TOSHIBA is not set -CONFIG_ACPI_BLACKLIST_YEAR=0 -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_SYSTEM=y -CONFIG_X86_PM_TIMER=y -CONFIG_ACPI_CONTAINER=y -# CONFIG_ACPI_SBS is not set -# CONFIG_APM is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set -# CONFIG_CPU_IDLE is not set - -# -# Bus options (PCI etc.) -# -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GOMMCONFIG is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIEAER=y -CONFIG_ARCH_SUPPORTS_MSI=y -CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y -CONFIG_HT_IRQ=y -CONFIG_ISA_DMA_API=y -CONFIG_ISA=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -# CONFIG_SCx200 is not set -CONFIG_K8_NB=y -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats / Emulations -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set -# CONFIG_KSDAZZLE_DONGLE is not set -# CONFIG_KS959_DONGLE is not set - -# -# Old SIR device drivers -# - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -# CONFIG_NSC_FIR is not set -# CONFIG_WINBOND_FIR is not set -# CONFIG_TOSHIBA_FIR is not set -# CONFIG_SMC_IRCC_FIR is not set -# CONFIG_ALI_FIR is not set -# CONFIG_VLSI_FIR is not set -# CONFIG_VIA_FIR is not set -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -# CONFIG_MTD is not set -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_AX88796 is not set -# CONFIG_PARPORT_1284 is not set -CONFIG_PNP=y -# CONFIG_PNP_DEBUG is not set - -# -# Protocols -# -# CONFIG_ISAPNP is not set -# CONFIG_PNPBIOS is not set -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_IBM_ASM is not set -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ASUS_LAPTOP is not set -# CONFIG_FUJITSU_LAPTOP is not set -# CONFIG_MSI_LAPTOP is not set -# CONFIG_SONY_LAPTOP is not set -# CONFIG_THINKPAD_ACPI is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_BLK_DEV_IDEACPI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -CONFIG_BLK_DEV_CMD640=y -# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -# CONFIG_BLK_DEV_IDEPNP is not set - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set - -# -# Other IDE chipsets support -# - -# -# Note: most of these also require special kernel boot parameters -# -# CONFIG_BLK_DEV_4DRIVES is not set -# CONFIG_BLK_DEV_ALI14XX is not set -# CONFIG_BLK_DEV_DTC2278 is not set -# CONFIG_BLK_DEV_HT6560B is not set -# CONFIG_BLK_DEV_QD65XX is not set -# CONFIG_BLK_DEV_UMC8672 is not set -CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -CONFIG_SCSI_DPT_I2O=m -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SEAGATE is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_ULTRASTOR is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_NET_SB1000 is not set -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -CONFIG_NET_VENDOR_3COM=y -# CONFIG_EL1 is not set -# CONFIG_EL2 is not set -# CONFIG_ELPLUS is not set -# CONFIG_EL16 is not set -# CONFIG_EL3 is not set -# CONFIG_3C515 is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -CONFIG_ULTRA=m -CONFIG_SMC9194=m -# CONFIG_NET_VENDOR_RACAL is not set -CONFIG_NET_TULIP=y -# CONFIG_DE2104X is not set -CONFIG_TULIP=m -CONFIG_TULIP_MWI=y -CONFIG_TULIP_MMIO=y -CONFIG_TULIP_NAPI=y -CONFIG_TULIP_NAPI_HW_MITIGATION=y -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -# CONFIG_E2100 is not set -# CONFIG_EWRK3 is not set -# CONFIG_EEXPRESS is not set -# CONFIG_EEXPRESS_PRO is not set -# CONFIG_HPLAN_PLUS is not set -# CONFIG_HPLAN is not set -# CONFIG_LP486E is not set -# CONFIG_ETH16I is not set -CONFIG_NE2000=y -# CONFIG_ZNET is not set -# CONFIG_SEEQ8005 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_PCNET32_NAPI=y -CONFIG_AMD8111_ETH=m -CONFIG_AMD8111E_NAPI=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_ADAPTEC_STARFIRE_NAPI=y -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_B44=m -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y -CONFIG_FORCEDETH=m -CONFIG_FORCEDETH_NAPI=y -CONFIG_CS89x0=m -CONFIG_EEPRO100=m -CONFIG_E100=m -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=y -CONFIG_8139CP=m -CONFIG_8139TOO=m -CONFIG_8139TOO_PIO=y -CONFIG_8139TOO_TUNE_TWISTER=y -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -CONFIG_SUNDANCE_MMIO=y -CONFIG_TLAN=m -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -CONFIG_VIA_RHINE_NAPI=y -CONFIG_SC92031=m -# CONFIG_NET_POCKET is not set -CONFIG_NETDEV_1000=y -CONFIG_ACENIC=m -CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_DL2K=m -CONFIG_E1000=m -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_R8169_NAPI=y -CONFIG_SIS190=m -CONFIG_SKGE=m -CONFIG_SKY2=m -CONFIG_SK98LIN=m -CONFIG_VIA_VELOCITY=m -CONFIG_TIGON3=m -CONFIG_BNX2=m -CONFIG_QLA3XXX=m -CONFIG_ATL1=m -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -# CONFIG_LIBERTAS is not set -# CONFIG_AIRO is not set -CONFIG_HERMES=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set -# CONFIG_PRISM54 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -# CONFIG_HOSTAP_PLX is not set -# CONFIG_HOSTAP_PCI is not set -# CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TABLET=y -# CONFIG_TABLET_USB_ACECAD is not set -# CONFIG_TABLET_USB_AIPTEK is not set -# CONFIG_TABLET_USB_GTCO is not set -# CONFIG_TABLET_USB_KBTAB is not set -CONFIG_TABLET_USB_WACOM=y -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_PCSPKR is not set -# CONFIG_INPUT_WISTRON_BTNS is not set -# CONFIG_INPUT_ATLAS_BTNS is not set -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_PRINTER=y -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set -# CONFIG_MWAVE is not set -# CONFIG_PC8736x_GPIO is not set -# CONFIG_NSC_GPIO is not set -# CONFIG_CS5535_GPIO is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HPET is not set -# CONFIG_HANGCHECK_TIMER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=m -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -# CONFIG_SSB_SILENT is not set -# CONFIG_SSB_DEBUG is not set -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_PMS is not set -# CONFIG_VIDEO_BWQCAM is not set -# CONFIG_VIDEO_CQCAM is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_STRADIS is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set -CONFIG_USB_DSBR=m -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -CONFIG_AGP=m -CONFIG_AGP_ALI=m -CONFIG_AGP_ATI=m -CONFIG_AGP_AMD=m -CONFIG_AGP_AMD64=m -CONFIG_AGP_INTEL=m -CONFIG_AGP_NVIDIA=m -CONFIG_AGP_SIS=m -CONFIG_AGP_SWORKS=m -CONFIG_AGP_VIA=m -CONFIG_AGP_EFFICEON=m -CONFIG_DRM=m -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_I810 is not set -# CONFIG_DRM_I830 is not set -# CONFIG_DRM_I915 is not set -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_SIS is not set -# CONFIG_DRM_VIA is not set -# CONFIG_DRM_SAVAGE is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ARC is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -CONFIG_FB_UVESA=m -# CONFIG_FB_VESA is not set -# CONFIG_FB_EFI is not set -# CONFIG_FB_HECUBA is not set -# CONFIG_FB_HGA is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I810 is not set -# CONFIG_FB_LE80578 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_GEODE is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CORGI=m -# CONFIG_BACKLIGHT_PROGEAR is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_SEQUENCER=y -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_MTS64 is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_PORTMAN2X4 is not set - -# -# ISA devices -# -# CONFIG_SND_ADLIB is not set -# CONFIG_SND_AD1816A is not set -# CONFIG_SND_AD1848 is not set -# CONFIG_SND_ALS100 is not set -# CONFIG_SND_AZT2320 is not set -# CONFIG_SND_CMI8330 is not set -# CONFIG_SND_CS4231 is not set -# CONFIG_SND_CS4232 is not set -# CONFIG_SND_CS4236 is not set -# CONFIG_SND_DT019X is not set -# CONFIG_SND_ES968 is not set -# CONFIG_SND_ES1688 is not set -# CONFIG_SND_ES18XX is not set -# CONFIG_SND_SC6000 is not set -# CONFIG_SND_GUSCLASSIC is not set -# CONFIG_SND_GUSEXTREME is not set -# CONFIG_SND_GUSMAX is not set -# CONFIG_SND_INTERWAVE is not set -# CONFIG_SND_INTERWAVE_STB is not set -# CONFIG_SND_OPL3SA2 is not set -# CONFIG_SND_OPTI92X_AD1848 is not set -# CONFIG_SND_OPTI92X_CS4231 is not set -# CONFIG_SND_OPTI93X is not set -# CONFIG_SND_MIRO is not set -# CONFIG_SND_SB8 is not set -# CONFIG_SND_SB16 is not set -# CONFIG_SND_SBAWE is not set -# CONFIG_SND_SGALAXY is not set -# CONFIG_SND_SSCAPE is not set -# CONFIG_SND_WAVEFRONT is not set - -# -# PCI devices -# -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_CS5535AUDIO is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# -# CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_SUSPEND=y -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_SL811_HCD=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# - -# -# LED Triggers -# -# CONFIG_LEDS_TRIGGERS is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set -# CONFIG_LGUEST is not set - -# -# Userspace I/O -# -# CONFIG_UIO is not set - -# -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set -CONFIG_DMIID=y - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=y -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=y -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_SAMPLES is not set -CONFIG_EARLY_PRINTK=y -CONFIG_X86_FIND_SMP_CONFIG=y -CONFIG_X86_MPPARSE=y -CONFIG_DOUBLEFAULT=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -# CONFIG_CRYPTO_TWOFISH_586 is not set -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -# CONFIG_CRYPTO_AES_586 is not set -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_AUDIT_GENERIC=y -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-c7x0 b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-c7x0 deleted file mode 100644 index a77f3f519e..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-c7x0 +++ /dev/null @@ -1,1746 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 18:27:11 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx/PXA3xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_EM_X270 is not set -# CONFIG_MACH_ZYLONITE is not set -# CONFIG_MACH_ARMCORE is not set -CONFIG_PXA_SHARPSL_25x=y -# CONFIG_PXA_SHARPSL_27x is not set -# CONFIG_MACH_HX2750 is not set -# CONFIG_MACH_POODLE is not set -CONFIG_MACH_CORGI=y -CONFIG_MACH_SHEPHERD=y -CONFIG_MACH_HUSKY=y -# CONFIG_MACH_TOSA is not set -CONFIG_PXA25x=y -CONFIG_PXA_SHARP_C7xx=y -CONFIG_PXA_SSP=y -# CONFIG_PXA_KEYS is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -# CONFIG_IWMMXT is not set -CONFIG_XSCALE_PMU=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARPSL_PM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=m - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y -CONFIG_CPU_FREQ_PXA25x=y - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set -# CONFIG_KSDAZZLE_DONGLE is not set -# CONFIG_KS959_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -# CONFIG_BT_HCIBTSDIO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=y -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_LIBERTAS is not set -CONFIG_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_ATMEL is not set -CONFIG_AIRO_CS=m -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_CORGI=y -# CONFIG_KEYBOARD_SPITZ is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_CORGI=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -CONFIG_USB_DSBR=m -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_PXA is not set -# CONFIG_FB_MBX is not set -CONFIG_FB_W100=y -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_SEQUENCER_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_AC97_CODEC is not set -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -CONFIG_SND_PXA2XX_PCM=m -CONFIG_SND_PXA2XX_AC97=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -# CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_I2S=m -CONFIG_SND_PXA2XX_SOC_CORGI=m - -# -# SoC Audio support for SuperH -# -CONFIG_SND_SOC_WM8731=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -# CONFIG_AC97_BUS is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_PXA=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_CORGI=y -# CONFIG_LEDS_TOSA is not set -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-collie b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-collie deleted file mode 100644 index 06b4d15ddb..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-collie +++ /dev/null @@ -1,1436 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 18:52:49 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_TIME is not set -# CONFIG_GENERIC_CLOCKEVENTS is not set -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_ELF_CORE is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -CONFIG_ARCH_SA1100=y -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# SA11x0 Implementations -# -# CONFIG_SA1100_ASSABET is not set -# CONFIG_SA1100_CERF is not set -CONFIG_SA1100_COLLIE=y -# CONFIG_SA1100_H3100 is not set -# CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set -# CONFIG_SA1100_BADGE4 is not set -# CONFIG_SA1100_JORNADA720 is not set -# CONFIG_SA1100_HACKKIT is not set -# CONFIG_SA1100_LART is not set -# CONFIG_SA1100_PLEB is not set -# CONFIG_SA1100_SHANNON is not set -# CONFIG_SA1100_SIMPAD is not set -# CONFIG_SA1100_SSP is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_SA1100=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4=y -CONFIG_CPU_CACHE_V4WB=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_SHARP_LOCOMO=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARPSL_PM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -CONFIG_ISA=y -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -CONFIG_PCMCIA_SA1100=m - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -CONFIG_PREEMPT=y -CONFIG_NO_IDLE_HZ=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_NODES_SHIFT=2 -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -# CONFIG_LEDS is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySA0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 mem=32M fbcon=rotate:1 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -# CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -CONFIG_SA1100_FIR=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -# CONFIG_BT_HCIBTSDIO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -# CONFIG_IEEE80211_SOFTMAC is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_SHARP=y - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_SA1100=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_PNP is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_IDE_ARM is not set - -# -# Other IDE chipsets support -# - -# -# Note: most of these also require special kernel boot parameters -# -# CONFIG_BLK_DEV_4DRIVES is not set -# CONFIG_BLK_DEV_ALI14XX is not set -# CONFIG_BLK_DEV_DTC2278 is not set -# CONFIG_BLK_DEV_HT6560B is not set -# CONFIG_BLK_DEV_QD65XX is not set -# CONFIG_BLK_DEV_UMC8672 is not set -# CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_AX88796 is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -CONFIG_ATMEL=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_AIRO_CS=m -CONFIG_PCMCIA_WL3501=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=m - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_LOCOMO=m -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set - -# -# SPI support -# -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_BITBANG is not set - -# -# SPI Protocol Masters -# -# CONFIG_SPI_AT25 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia Capabilities Port drivers -# -CONFIG_MCP=y -CONFIG_MCP_SA11X0=y -CONFIG_MCP_UCB1200=y -CONFIG_MCP_UCB1200_TS=m -# CONFIG_MCP_COLLIE_TS is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_PMS is not set -# CONFIG_VIDEO_CPIA is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -CONFIG_FB_SA1100=y -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -# CONFIG_LCD_LTV350QV is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set -CONFIG_BACKLIGHT_LOCOMO=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -# CONFIG_LOGO is not set - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_DUMMY=m -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# - -# -# SPI devices -# - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# -# CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=m -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_SPI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m - -# -# LED drivers -# -CONFIG_LEDS_LOCOMO=m -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -# CONFIG_LEDS_TRIGGER_IDE_DISK is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=m - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_MAX6902 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=m - -# -# File systems -# -CONFIG_EXT2_FS=m -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -CONFIG_FS_MBCACHE=m -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_LZO is not set -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-htcuniversal b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-htcuniversal deleted file mode 100644 index 4be1331776..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-htcuniversal +++ /dev/null @@ -1,1307 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 21:46:02 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -CONFIG_DMABOUNCE=y - -# -# Intel PXA2xx/PXA3xx Implementations -# -CONFIG_ARCH_LUBBOCK=y -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -# CONFIG_PXA_SHARPSL is not set -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_EM_X270 is not set -# CONFIG_MACH_ZYLONITE is not set -# CONFIG_MACH_ARMCORE is not set -CONFIG_PXA25x=y -# CONFIG_PXA_KEYS is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_IWMMXT=y -CONFIG_XSCALE_PMU=y -CONFIG_SA1111=y -CONFIG_FORCE_MAX_ZONEORDER=9 - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -# CONFIG_LEDS is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y -CONFIG_CPU_FREQ_PXA25x=y - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -CONFIG_CPU_FREQ_GOV_USERSPACE=y -# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -# CONFIG_SUSPEND is not set -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=y - -# -# IrDA protocols -# -CONFIG_IRLAN=y -# CONFIG_IRNET is not set -CONFIG_IRCOMM=y -CONFIG_IRDA_ULTRA=y - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=y - -# -# Dongle support -# -# CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -CONFIG_PXA_FICP=y -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -# CONFIG_BT_HCIBTSDIO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -# CONFIG_BT_HCIVHCI is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=0 -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -# CONFIG_MTD_CHAR is not set -# CONFIG_MTD_BLKDEVS is not set -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_SHARP_SL is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -CONFIG_MTD_MTDRAM=m -CONFIG_MTDRAM_TOTAL_SIZE=4096 -CONFIG_MTDRAM_ERASE_SIZE=128 -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_NET_ETHERNET is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -CONFIG_ACX=m -CONFIG_ACX_MEM=y -# CONFIG_ACX_CS is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_POWER is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_ASIC3=y -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=m -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=m -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -CONFIG_W1=y - -# -# 1-wire Bus Masters -# -# CONFIG_W1_MASTER_DS2482 is not set -CONFIG_W1_MASTER_DS1WM=y - -# -# 1-wire Slaves -# -# CONFIG_W1_SLAVE_THERM is not set -# CONFIG_W1_SLAVE_SMEM is not set -# CONFIG_W1_SLAVE_DS2433 is not set -CONFIG_W1_SLAVE_DS2760=y -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_PDA_POWER=y -CONFIG_APM_POWER=y -CONFIG_BATTERY_DS2760=y -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -CONFIG_HTC_ASIC3=y -CONFIG_HTC_ASIC3_DS1WM=y - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -CONFIG_FB_PXA_LCD_QVGA=y -# CONFIG_FB_PXA_LCD_VGA is not set -# CONFIG_FB_PXA_OVERLAY is not set -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -# CONFIG_SND_PXA2XX_AC97 is not set - -# -# System on Chip audio support -# -# CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set - -# -# MMC/SD Host Controller Drivers -# -# CONFIG_MMC_PXA is not set -CONFIG_MMC_ASIC3=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -# CONFIG_LEDS_GPIO is not set -CONFIG_LEDS_ASIC3=y - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_DEBUG=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_VM=y -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -# CONFIG_CRYPTO_CBC is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_LZO is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set -CONFIG_CRYPTO_HW=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-hx2000 b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-hx2000 deleted file mode 100644 index f9317ba2a2..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-hx2000 +++ /dev/null @@ -1,1733 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 18:10:53 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx/PXA3xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -# CONFIG_PXA_SHARPSL is not set -# CONFIG_MACH_TRIZEPS4 is not set -CONFIG_MACH_HX2750=y -# CONFIG_MACH_EM_X270 is not set -# CONFIG_MACH_ZYLONITE is not set -# CONFIG_MACH_ARMCORE is not set -CONFIG_PXA27x=y -CONFIG_PXA_SSP=y -CONFIG_PXA_KEYS=y - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_IWMMXT=y -CONFIG_XSCALE_PMU=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=y - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set -# CONFIG_KSDAZZLE_DONGLE is not set -# CONFIG_KS959_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -# CONFIG_BT_HCIBTSDIO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PXA2XX is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_SHARP_SL is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_LIBERTAS is not set -CONFIG_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_ATMEL is not set -CONFIG_AIRO_CS=m -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m -# CONFIG_ZD1211RW is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_PXA27x=m -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_TOUCHSCREEN_TSC2101=y -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -CONFIG_MFD_TSC2101=y -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -CONFIG_USB_DSBR=m -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -CONFIG_FB_PXA_LCD_QVGA=y -# CONFIG_FB_PXA_LCD_VGA is not set -CONFIG_FB_PXA_OVERLAY=y -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -CONFIG_FONT_MINI_4x6=y -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_SEQUENCER_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -CONFIG_SND_PXA2XX_PCM=m -CONFIG_SND_PXA2XX_AC97=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -# CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_M66592 is not set -CONFIG_USB_GADGET_PXA27X=y -CONFIG_USB_PXA27X=y -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_PXA=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-poodle b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-poodle deleted file mode 100644 index 6953b2af5b..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-poodle +++ /dev/null @@ -1,1756 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 22:47:47 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx/PXA3xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_EM_X270 is not set -# CONFIG_MACH_ZYLONITE is not set -# CONFIG_MACH_ARMCORE is not set -CONFIG_PXA_SHARPSL_25x=y -# CONFIG_PXA_SHARPSL_27x is not set -# CONFIG_MACH_HX2750 is not set -# CONFIG_MACH_HTCUNIVERSAL is not set -CONFIG_MACH_POODLE=y -# CONFIG_MACH_CORGI is not set -# CONFIG_MACH_SHEPHERD is not set -# CONFIG_MACH_HUSKY is not set -# CONFIG_MACH_TOSA is not set -CONFIG_PXA25x=y -CONFIG_PXA_SSP=y -# CONFIG_PXA_KEYS is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -# CONFIG_IWMMXT is not set -CONFIG_XSCALE_PMU=y -CONFIG_SHARP_LOCOMO=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARPSL_PM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=y - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y -CONFIG_CPU_FREQ_PXA25x=y - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set -# CONFIG_KSDAZZLE_DONGLE is not set -# CONFIG_KS959_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -# CONFIG_BT_HCIBTSDIO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=y -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_LIBERTAS is not set -CONFIG_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_ATMEL is not set -CONFIG_AIRO_CS=m -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m -# CONFIG_ZD1211RW is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_LOCOMO=y -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_CORGI is not set -# CONFIG_KEYBOARD_SPITZ is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_CORGI=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -CONFIG_USB_DSBR=m -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -CONFIG_FB_PXA_LCD_QVGA=y -# CONFIG_FB_PXA_LCD_VGA is not set -CONFIG_FB_PXA_OVERLAY=y -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_W100 is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set -CONFIG_BACKLIGHT_LOCOMO=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -CONFIG_FONT_MINI_4x6=y -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_SEQUENCER_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_AC97_CODEC is not set -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -CONFIG_SND_PXA2XX_PCM=m -CONFIG_SND_PXA2XX_AC97=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -# CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_I2S=m -CONFIG_SND_PXA2XX_SOC_POODLE=m - -# -# SoC Audio support for SuperH -# -CONFIG_SND_SOC_WM8731=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -# CONFIG_AC97_BUS is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_PXA=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_LOCOMO=y -# CONFIG_LEDS_TOSA is not set -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-qemuarm b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-qemuarm deleted file mode 100644 index bf96d2aff7..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-qemuarm +++ /dev/null @@ -1,1582 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 22:28:17 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -CONFIG_ARCH_VERSATILE=y -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Versatile platform type -# -CONFIG_ARCH_VERSATILE_PB=y -# CONFIG_MACH_VERSATILE_AB is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM926T=y -# CONFIG_CPU_V6 is not set -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_ARM_VIC=y -CONFIG_ICST307=y - -# -# Bus support -# -CONFIG_ARM_AMBA=y -CONFIG_PCI=y -CONFIG_PCI_SYSCALL=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCI_LEGACY=y -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyAMA0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -# CONFIG_APM_EMULATION is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set -# CONFIG_KSDAZZLE_DONGLE is not set -# CONFIG_KS959_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -# CONFIG_TOSHIBA_FIR is not set -# CONFIG_VLSI_FIR is not set -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_GEOMETRY is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=m -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=51200 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -# CONFIG_LIBERTAS is not set -CONFIG_HERMES=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set -# CONFIG_PRISM54 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -# CONFIG_HOSTAP_PLX is not set -# CONFIG_HOSTAP_PCI is not set -# CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TABLET=y -# CONFIG_TABLET_USB_ACECAD is not set -# CONFIG_TABLET_USB_AIPTEK is not set -# CONFIG_TABLET_USB_GTCO is not set -# CONFIG_TABLET_USB_KBTAB is not set -CONFIG_TABLET_USB_WACOM=y -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_AMBAKMI=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_STRADIS is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set -CONFIG_USB_DSBR=m -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -CONFIG_FB_ARMCLCD=y -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CORGI=m - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y - -# -# Sound -# -# CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -CONFIG_USB_SL811_HCD=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PL031 is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=y -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-qemux86 b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-qemux86 deleted file mode 100644 index 39e236ae8b..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-qemux86 +++ /dev/null @@ -1,1993 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 18:20:37 2008 -# -# CONFIG_64BIT is not set -CONFIG_X86_32=y -# CONFIG_X86_64 is not set -CONFIG_X86=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_MMU=y -CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_DMI=y -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME_VSYSCALL is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -# CONFIG_ZONE_DMA32 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_AUDIT_ARCH is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -CONFIG_KTIME_SCALAR=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_AUDIT_TREE=y -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor type and features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_SMP=y -CONFIG_X86_PC=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_VOYAGER is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_BIGSMP is not set -# CONFIG_X86_VISWS is not set -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_ES7000 is not set -# CONFIG_X86_VSMP is not set -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_PARAVIRT_GUEST is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -CONFIG_M686=y -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MGEODEGX1 is not set -# CONFIG_MGEODE_LX is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_MVIAC7 is not set -# CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -# CONFIG_GENERIC_CPU is not set -CONFIG_X86_GENERIC=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 -CONFIG_X86_XADD=y -CONFIG_X86_PPRO_FENCE=y -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -CONFIG_X86_GOOD_APIC=y -CONFIG_X86_INTEL_USERCOPY=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_TSC=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=4 -# CONFIG_HPET_TIMER is not set -CONFIG_NR_CPUS=8 -CONFIG_SCHED_SMT=y -CONFIG_SCHED_MC=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_NONFATAL=y -CONFIG_X86_MCE_P4THERMAL=y -CONFIG_VM86=y -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -# CONFIG_X86_REBOOTFIXUPS is not set -# CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set -# CONFIG_X86_CPUID is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_2G_OPT is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_X86_PAE is not set -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_NR_QUICK=1 -CONFIG_VIRT_TO_BUS=y -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -# CONFIG_EFI is not set -CONFIG_IRQBALANCE=y -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_KEXEC=y -CONFIG_PHYSICAL_START=0x100000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -CONFIG_HOTPLUG_CPU=y -CONFIG_COMPAT_VDSO=y - -# -# Power management options -# -CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP_SMP=y -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_SMP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_HIBERNATION_SMP_POSSIBLE=y -# CONFIG_HIBERNATION is not set -CONFIG_ACPI=y -CONFIG_ACPI_SLEEP=y -# CONFIG_ACPI_PROCFS is not set -CONFIG_ACPI_PROCFS_POWER=y -CONFIG_ACPI_SYSFS_POWER=y -CONFIG_ACPI_PROC_EVENT=y -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -# CONFIG_ACPI_VIDEO is not set -CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_THERMAL=y -# CONFIG_ACPI_ASUS is not set -# CONFIG_ACPI_TOSHIBA is not set -CONFIG_ACPI_BLACKLIST_YEAR=0 -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_EC=y -CONFIG_ACPI_POWER=y -CONFIG_ACPI_SYSTEM=y -CONFIG_X86_PM_TIMER=y -CONFIG_ACPI_CONTAINER=y -# CONFIG_ACPI_SBS is not set -# CONFIG_APM is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set -# CONFIG_CPU_IDLE is not set - -# -# Bus options (PCI etc.) -# -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GOMMCONFIG is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y -CONFIG_HT_IRQ=y -CONFIG_ISA_DMA_API=y -CONFIG_ISA=y -# CONFIG_EISA is not set -# CONFIG_MCA is not set -# CONFIG_SCx200 is not set -CONFIG_K8_NB=y -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats / Emulations -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set -# CONFIG_KSDAZZLE_DONGLE is not set -# CONFIG_KS959_DONGLE is not set - -# -# Old SIR device drivers -# - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -# CONFIG_NSC_FIR is not set -# CONFIG_WINBOND_FIR is not set -# CONFIG_TOSHIBA_FIR is not set -# CONFIG_SMC_IRCC_FIR is not set -# CONFIG_ALI_FIR is not set -# CONFIG_VLSI_FIR is not set -# CONFIG_VIA_FIR is not set -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -# CONFIG_MTD is not set -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_AX88796 is not set -# CONFIG_PARPORT_1284 is not set -CONFIG_PNP=y -# CONFIG_PNP_DEBUG is not set - -# -# Protocols -# -# CONFIG_ISAPNP is not set -# CONFIG_PNPBIOS is not set -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_IBM_ASM is not set -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ASUS_LAPTOP is not set -# CONFIG_FUJITSU_LAPTOP is not set -# CONFIG_MSI_LAPTOP is not set -# CONFIG_SONY_LAPTOP is not set -# CONFIG_THINKPAD_ACPI is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_BLK_DEV_IDEACPI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -CONFIG_BLK_DEV_CMD640=y -# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -# CONFIG_BLK_DEV_IDEPNP is not set - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_RZ1000=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set - -# -# Other IDE chipsets support -# - -# -# Note: most of these also require special kernel boot parameters -# -# CONFIG_BLK_DEV_4DRIVES is not set -# CONFIG_BLK_DEV_ALI14XX is not set -# CONFIG_BLK_DEV_DTC2278 is not set -# CONFIG_BLK_DEV_HT6560B is not set -# CONFIG_BLK_DEV_QD65XX is not set -# CONFIG_BLK_DEV_UMC8672 is not set -CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -CONFIG_SCSI_DPT_I2O=m -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SEAGATE is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_ULTRASTOR is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_NET_SB1000 is not set -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -CONFIG_NET_VENDOR_3COM=y -# CONFIG_EL1 is not set -# CONFIG_EL2 is not set -# CONFIG_ELPLUS is not set -# CONFIG_EL16 is not set -# CONFIG_EL3 is not set -# CONFIG_3C515 is not set -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_LANCE=m -CONFIG_NET_VENDOR_SMC=y -CONFIG_WD80x3=m -CONFIG_ULTRA=m -CONFIG_SMC9194=m -# CONFIG_NET_VENDOR_RACAL is not set -CONFIG_NET_TULIP=y -# CONFIG_DE2104X is not set -CONFIG_TULIP=m -CONFIG_TULIP_MWI=y -CONFIG_TULIP_MMIO=y -CONFIG_TULIP_NAPI=y -CONFIG_TULIP_NAPI_HW_MITIGATION=y -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_AT1700=m -CONFIG_DEPCA=m -CONFIG_HP100=m -CONFIG_NET_ISA=y -# CONFIG_E2100 is not set -# CONFIG_EWRK3 is not set -# CONFIG_EEXPRESS is not set -# CONFIG_EEXPRESS_PRO is not set -# CONFIG_HPLAN_PLUS is not set -# CONFIG_HPLAN is not set -# CONFIG_LP486E is not set -# CONFIG_ETH16I is not set -CONFIG_NE2000=y -# CONFIG_ZNET is not set -# CONFIG_SEEQ8005 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -CONFIG_PCNET32_NAPI=y -CONFIG_AMD8111_ETH=m -CONFIG_AMD8111E_NAPI=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_ADAPTEC_STARFIRE_NAPI=y -CONFIG_AC3200=m -CONFIG_APRICOT=m -CONFIG_B44=m -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y -CONFIG_FORCEDETH=m -CONFIG_FORCEDETH_NAPI=y -CONFIG_CS89x0=m -CONFIG_EEPRO100=m -CONFIG_E100=m -CONFIG_FEALNX=m -CONFIG_NATSEMI=m -CONFIG_NE2K_PCI=y -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_SIS900=m -CONFIG_EPIC100=m -CONFIG_SUNDANCE=m -CONFIG_SUNDANCE_MMIO=y -CONFIG_TLAN=m -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -CONFIG_VIA_RHINE_NAPI=y -CONFIG_SC92031=m -# CONFIG_NET_POCKET is not set -CONFIG_NETDEV_1000=y -CONFIG_ACENIC=m -CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_DL2K=m -CONFIG_E1000=m -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -CONFIG_NS83820=m -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_R8169=m -CONFIG_R8169_NAPI=y -CONFIG_SIS190=m -CONFIG_SKGE=m -CONFIG_SKY2=m -CONFIG_SK98LIN=m -CONFIG_VIA_VELOCITY=m -CONFIG_TIGON3=m -CONFIG_BNX2=m -CONFIG_QLA3XXX=m -CONFIG_ATL1=m -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -# CONFIG_LIBERTAS is not set -# CONFIG_AIRO is not set -CONFIG_HERMES=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set -# CONFIG_PRISM54 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -# CONFIG_HOSTAP_PLX is not set -# CONFIG_HOSTAP_PCI is not set -# CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TABLET=y -# CONFIG_TABLET_USB_ACECAD is not set -# CONFIG_TABLET_USB_AIPTEK is not set -# CONFIG_TABLET_USB_GTCO is not set -# CONFIG_TABLET_USB_KBTAB is not set -CONFIG_TABLET_USB_WACOM=y -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_PCSPKR is not set -# CONFIG_INPUT_WISTRON_BTNS is not set -# CONFIG_INPUT_ATLAS_BTNS is not set -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_PRINTER=y -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set -# CONFIG_MWAVE is not set -# CONFIG_PC8736x_GPIO is not set -# CONFIG_NSC_GPIO is not set -# CONFIG_CS5535_GPIO is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HPET is not set -# CONFIG_HANGCHECK_TIMER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=m -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -# CONFIG_SSB_SILENT is not set -# CONFIG_SSB_DEBUG is not set -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_PMS is not set -# CONFIG_VIDEO_BWQCAM is not set -# CONFIG_VIDEO_CQCAM is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_STRADIS is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_USB_VICAM is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set -CONFIG_USB_DSBR=m -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -CONFIG_AGP=m -CONFIG_AGP_ALI=m -CONFIG_AGP_ATI=m -CONFIG_AGP_AMD=m -CONFIG_AGP_AMD64=m -CONFIG_AGP_INTEL=m -CONFIG_AGP_NVIDIA=m -CONFIG_AGP_SIS=m -CONFIG_AGP_SWORKS=m -CONFIG_AGP_VIA=m -CONFIG_AGP_EFFICEON=m -CONFIG_DRM=m -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_I810 is not set -# CONFIG_DRM_I830 is not set -# CONFIG_DRM_I915 is not set -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_SIS is not set -# CONFIG_DRM_VIA is not set -# CONFIG_DRM_SAVAGE is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ARC is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -CONFIG_FB_UVESA=m -# CONFIG_FB_VESA is not set -# CONFIG_FB_EFI is not set -# CONFIG_FB_HECUBA is not set -# CONFIG_FB_HGA is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I810 is not set -# CONFIG_FB_LE80578 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_GEODE is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CORGI=m -# CONFIG_BACKLIGHT_PROGEAR is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_VIDEO_SELECT=y -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_SEQUENCER=y -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_MTS64 is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_PORTMAN2X4 is not set - -# -# ISA devices -# -# CONFIG_SND_ADLIB is not set -# CONFIG_SND_AD1816A is not set -# CONFIG_SND_AD1848 is not set -# CONFIG_SND_ALS100 is not set -# CONFIG_SND_AZT2320 is not set -# CONFIG_SND_CMI8330 is not set -# CONFIG_SND_CS4231 is not set -# CONFIG_SND_CS4232 is not set -# CONFIG_SND_CS4236 is not set -# CONFIG_SND_DT019X is not set -# CONFIG_SND_ES968 is not set -# CONFIG_SND_ES1688 is not set -# CONFIG_SND_ES18XX is not set -# CONFIG_SND_SC6000 is not set -# CONFIG_SND_GUSCLASSIC is not set -# CONFIG_SND_GUSEXTREME is not set -# CONFIG_SND_GUSMAX is not set -# CONFIG_SND_INTERWAVE is not set -# CONFIG_SND_INTERWAVE_STB is not set -# CONFIG_SND_OPL3SA2 is not set -# CONFIG_SND_OPTI92X_AD1848 is not set -# CONFIG_SND_OPTI92X_CS4231 is not set -# CONFIG_SND_OPTI93X is not set -# CONFIG_SND_MIRO is not set -# CONFIG_SND_SB8 is not set -# CONFIG_SND_SB16 is not set -# CONFIG_SND_SBAWE is not set -# CONFIG_SND_SGALAXY is not set -# CONFIG_SND_SSCAPE is not set -# CONFIG_SND_WAVEFRONT is not set - -# -# PCI devices -# -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_CS5535AUDIO is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# -# CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_SUSPEND=y -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_SL811_HCD=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# - -# -# LED Triggers -# -# CONFIG_LEDS_TRIGGERS is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set -# CONFIG_LGUEST is not set - -# -# Userspace I/O -# -# CONFIG_UIO is not set - -# -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set -CONFIG_DMIID=y - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=y -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=y -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_KPROBES is not set -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_SAMPLES is not set -CONFIG_EARLY_PRINTK=y -CONFIG_X86_FIND_SMP_CONFIG=y -CONFIG_X86_MPPARSE=y -CONFIG_DOUBLEFAULT=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -# CONFIG_CRYPTO_TWOFISH_586 is not set -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -# CONFIG_CRYPTO_AES_586 is not set -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_AUDIT_GENERIC=y -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-spitz b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-spitz deleted file mode 100644 index cc9f6e6988..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-spitz +++ /dev/null @@ -1,1740 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 18:32:23 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx/PXA3xx Implementations -# -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -CONFIG_PXA_SHARPSL=y -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_EM_X270 is not set -# CONFIG_MACH_ZYLONITE is not set -# CONFIG_MACH_ARMCORE is not set -# CONFIG_PXA_SHARPSL_25x is not set -CONFIG_PXA_SHARPSL_27x=y -# CONFIG_MACH_HX2750 is not set -CONFIG_MACH_AKITA=y -CONFIG_MACH_SPITZ=y -CONFIG_MACH_BORZOI=y -CONFIG_PXA27x=y -CONFIG_PXA_SHARP_Cxx00=y -CONFIG_PXA_SSP=y -# CONFIG_PXA_KEYS is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_IWMMXT=y -CONFIG_XSCALE_PMU=y -CONFIG_SHARP_PARAM=y -CONFIG_SHARPSL_PM=y -CONFIG_SHARP_SCOOP=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=y - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/hda1 rootfstype=ext3 rootdelay=1 rw fbcon=rotate:1 dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set -# CONFIG_KSDAZZLE_DONGLE is not set -# CONFIG_KS959_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -# CONFIG_BT_HCIBTSDIO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=m -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -# CONFIG_MTD_BLOCK_RO is not set -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=m -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_SHARP_SL=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=m -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_SHARPSL=m -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_LIBERTAS is not set -CONFIG_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_ATMEL is not set -CONFIG_AIRO_CS=m -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_NET_PCMCIA=y -# CONFIG_PCMCIA_3C589 is not set -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=m -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_CORGI is not set -CONFIG_KEYBOARD_SPITZ=y -# CONFIG_KEYBOARD_PXA27x is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_CORGI=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -CONFIG_USB_DSBR=m -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -CONFIG_FB_PXA_LCD_QVGA=y -# CONFIG_FB_PXA_LCD_VGA is not set -CONFIG_FB_PXA_OVERLAY=y -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_W100 is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_SEQUENCER_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_AC97_CODEC is not set -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -CONFIG_SND_PXA2XX_PCM=m -CONFIG_SND_PXA2XX_AC97=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -# CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m -CONFIG_SND_PXA2XX_SOC_I2S=m -CONFIG_SND_PXA2XX_SOC_SPITZ=m - -# -# SoC Audio support for SuperH -# -CONFIG_SND_SOC_WM8750=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -# CONFIG_AC97_BUS is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_CS=m -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_M66592 is not set -CONFIG_USB_GADGET_PXA27X=y -CONFIG_USB_PXA27X=m -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_PXA=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_SPITZ=y -# CONFIG_LEDS_TOSA is not set -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-zylonite b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-zylonite deleted file mode 100644 index c813b1a0f5..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/defconfig-zylonite +++ /dev/null @@ -1,1740 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc8 -# Sun Jan 20 18:42:35 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=m -CONFIG_IOSCHED_CFQ=m -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_PNX4008 is not set -CONFIG_ARCH_PXA=y -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set - -# -# Intel PXA2xx/PXA3xx Implementations -# - -# -# Supported PXA3xx Processor Variants -# -CONFIG_CPU_PXA300=y -CONFIG_CPU_PXA310=y -CONFIG_CPU_PXA320=y -# CONFIG_ARCH_LUBBOCK is not set -# CONFIG_MACH_LOGICPD_PXA270 is not set -# CONFIG_MACH_MAINSTONE is not set -# CONFIG_ARCH_PXA_IDP is not set -# CONFIG_PXA_SHARPSL is not set -# CONFIG_MACH_TRIZEPS4 is not set -# CONFIG_MACH_HX2750 is not set -# CONFIG_MACH_EM_X270 is not set -CONFIG_MACH_ZYLONITE=y -# CONFIG_MACH_ARMCORE is not set -CONFIG_PXA3xx=y - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSC3=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_IO_36=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_IWMMXT=y - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# -CONFIG_PCMCIA_PXA2XX=m - -# -# Kernel Features -# -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,38400 root=/dev/mtdblock2 rootfstype=jffs2 mem=64M dyntick=enable debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_SUSPEND=y -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set -# CONFIG_NF_CONNTRACK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -# CONFIG_IRDA_CACHE_LAST_LSAP is not set -# CONFIG_IRDA_FAST_RR is not set -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -# CONFIG_IRTTY_SIR is not set - -# -# Dongle support -# -# CONFIG_KINGSUN_DONGLE is not set -# CONFIG_KSDAZZLE_DONGLE is not set -# CONFIG_KS959_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -CONFIG_PXA_FICP=m -# CONFIG_MCS_FIR is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set -# CONFIG_BT_HCIBTSDIO is not set -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_SHARP_SL is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_H1900 is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_SHARPSL is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set -# CONFIG_ATA is not set -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set -# CONFIG_DM_DELAY is not set -# CONFIG_DM_UEVENT is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_SMC911X is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_PCMCIA_RAYCS is not set -# CONFIG_LIBERTAS is not set -CONFIG_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_ATMEL is not set -CONFIG_AIRO_CS=m -# CONFIG_PCMCIA_WL3501 is not set -# CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_CS=m -# CONFIG_ZD1211RW is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -CONFIG_USB_NET_CDC_SUBSET=m -# CONFIG_USB_ALI_M5632 is not set -# CONFIG_USB_AN2720 is not set -# CONFIG_USB_BELKIN is not set -CONFIG_USB_ARMLINUX=y -# CONFIG_USB_EPSON2888 is not set -# CONFIG_USB_KC2190 is not set -# CONFIG_USB_NET_ZAURUS is not set -# CONFIG_NET_PCMCIA is not set -# CONFIG_WAN is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPP_MPPE is not set -# CONFIG_PPPOE is not set -# CONFIG_PPPOL2TP is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -CONFIG_INPUT_POWER=y - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PXA=y -CONFIG_SERIAL_PXA_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_PXA=y -# CONFIG_I2C_PXA_SLAVE is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_ASIC3_DS1WM is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -# CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_USB_W9968CF is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_ZC0301 is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -CONFIG_USB_DSBR=m -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -CONFIG_USB_DABUSB=m - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_PXA=y -# CONFIG_FB_PXA_LCD_QVGA is not set -CONFIG_FB_PXA_LCD_VGA=y -CONFIG_FB_PXA_OVERLAY=y -# CONFIG_FB_PXA_PARAMETERS is not set -# CONFIG_FB_MBX is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CORGI=m - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_LOGO_OHAND_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_SEQUENCER_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# -CONFIG_SND_PXA2XX_PCM=m -CONFIG_SND_PXA2XX_AC97=m - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# -CONFIG_SND_SOC=m -CONFIG_SND_PXA2XX_SOC=m - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m -CONFIG_HID_SUPPORT=y -CONFIG_HID=m -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -CONFIG_USB_SERIAL_BELKIN=m -# CONFIG_USB_SERIAL_CH341 is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set -# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -# CONFIG_USB_SERIAL_OPTION is not set -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -# CONFIG_USB_BERRY_CHARGE is not set -CONFIG_USB_LED=m -# CONFIG_USB_CYPRESS_CY7C63 is not set -CONFIG_USB_CYTHERM=m -# CONFIG_USB_PHIDGET is not set -CONFIG_USB_IDMOUSE=m -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -CONFIG_USB_GADGET_M66592=y -CONFIG_USB_M66592=y -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y -# CONFIG_USB_ZERO is not set -# CONFIG_USB_ETH is not set -# CONFIG_USB_GADGETFS is not set -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_PXA=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SA1100=y - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=m -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_SYSFS is not set -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y -CONFIG_SMB_NLS_REMOTE="cp437" -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -# CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_HW is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/hostap-monitor-mode.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/hostap-monitor-mode.patch deleted file mode 100644 index 641fd19e50..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/hostap-monitor-mode.patch +++ /dev/null @@ -1,209 +0,0 @@ -This is a patch that I've been maintaining for a few years, and I'd -really like to see it added to the mainstream zaurus kernel so I can -finally stop distributing my own. - -This patch only effects the card while in monitor mode, and does not -cause any known stability issues. - -http://patches.aircrack-ng.org/hostap-kernel-2.6.18.patch - -Rick Farina (Zero_Chaos) - -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c 2006-09-21 01:30:18.000000000 -0400 -@@ -69,6 +69,9 @@ - iface = netdev_priv(dev); - local = iface->local; - -+ if (local->iw_mode == IW_MODE_MONITOR) -+ goto xmit; -+ - if (skb->len < ETH_HLEN) { - printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb " - "(len=%d)\n", dev->name, skb->len); -@@ -234,6 +237,7 @@ - memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN); - } - -+xmit: - iface->stats.tx_packets++; - iface->stats.tx_bytes += skb->len; - -@@ -404,8 +408,6 @@ - } - - if (skb->len < 24) { -- printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb " -- "(len=%d)\n", dev->name, skb->len); - ret = 0; - iface->stats.tx_dropped++; - goto fail; -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.orig -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.rej -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c 2006-09-21 01:30:18.000000000 -0400 -@@ -1005,6 +1005,35 @@ - return fid; - } - -+static int prism2_monitor_enable(struct net_device *dev) -+{ -+ if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, 5)) { -+ printk(KERN_DEBUG "Port type setting for monitor mode " -+ "failed\n"); -+ return -EOPNOTSUPP; -+ } -+ -+ if (hfa384x_cmd(dev, HFA384X_CMDCODE_TEST | (0x0a << 8), -+ 0, NULL, NULL)) { -+ printk(KERN_DEBUG "Could not enter testmode 0x0a\n"); -+ return -EOPNOTSUPP; -+ } -+ -+ if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, -+ HFA384X_WEPFLAGS_PRIVACYINVOKED | -+ HFA384X_WEPFLAGS_HOSTENCRYPT | -+ HFA384X_WEPFLAGS_HOSTDECRYPT)) { -+ printk(KERN_DEBUG "WEP flags setting failed\n"); -+ return -EOPNOTSUPP; -+ } -+ -+ if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, 1)) { -+ printk(KERN_DEBUG "Could not set promiscuous mode\n"); -+ return -EOPNOTSUPP; -+ } -+ -+ return 0; -+} - - static int prism2_reset_port(struct net_device *dev) - { -@@ -1031,6 +1060,10 @@ - "port\n", dev->name); - } - -+ if (local->iw_mode == IW_MODE_MONITOR) -+ /* force mode 0x0a after port 0 reset */ -+ return prism2_monitor_enable(dev); -+ - /* It looks like at least some STA firmware versions reset - * fragmentation threshold back to 2346 after enable command. Restore - * the configured value, if it differs from this default. */ -@@ -1466,6 +1499,10 @@ - return 1; - } - -+ if (local->iw_mode == IW_MODE_MONITOR) -+ /* force mode 0x0a after port 0 reset */ -+ prism2_monitor_enable(dev); -+ - local->hw_ready = 1; - local->hw_reset_tries = 0; - local->hw_resetting = 0; -@@ -3156,6 +3193,7 @@ - local->func->hw_config = prism2_hw_config; - local->func->hw_reset = prism2_hw_reset; - local->func->hw_shutdown = prism2_hw_shutdown; -+ local->func->monitor_enable = prism2_monitor_enable; - local->func->reset_port = prism2_reset_port; - local->func->schedule_reset = prism2_schedule_reset; - #ifdef PRISM2_DOWNLOAD_SUPPORT -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_hw.c.orig -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c 2006-09-21 01:30:18.000000000 -0400 -@@ -1104,33 +1104,7 @@ - - printk(KERN_DEBUG "Enabling monitor mode\n"); - hostap_monitor_set_type(local); -- -- if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, -- HFA384X_PORTTYPE_PSEUDO_IBSS)) { -- printk(KERN_DEBUG "Port type setting for monitor mode " -- "failed\n"); -- return -EOPNOTSUPP; -- } -- -- /* Host decrypt is needed to get the IV and ICV fields; -- * however, monitor mode seems to remove WEP flag from frame -- * control field */ -- if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, -- HFA384X_WEPFLAGS_HOSTENCRYPT | -- HFA384X_WEPFLAGS_HOSTDECRYPT)) { -- printk(KERN_DEBUG "WEP flags setting failed\n"); -- return -EOPNOTSUPP; -- } -- -- if (local->func->reset_port(dev) || -- local->func->cmd(dev, HFA384X_CMDCODE_TEST | -- (HFA384X_TEST_MONITOR << 8), -- 0, NULL, NULL)) { -- printk(KERN_DEBUG "Setting monitor mode failed\n"); -- return -EOPNOTSUPP; -- } -- -- return 0; -+ return local->func->reset_port(dev); - } - - -@@ -1199,7 +1173,7 @@ - local->iw_mode = *mode; - - if (local->iw_mode == IW_MODE_MONITOR) -- hostap_monitor_mode_enable(local); -+ return hostap_monitor_mode_enable(local); - else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && - !local->fw_encrypt_ok) { - printk(KERN_DEBUG "%s: defaulting to host-based encryption as " -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c 2006-09-21 01:30:18.000000000 -0400 -@@ -331,7 +331,7 @@ - if (local->iw_mode == IW_MODE_REPEAT) - return HFA384X_PORTTYPE_WDS; - if (local->iw_mode == IW_MODE_MONITOR) -- return HFA384X_PORTTYPE_PSEUDO_IBSS; -+ return 5; /*HFA384X_PORTTYPE_PSEUDO_IBSS;*/ - return HFA384X_PORTTYPE_HOSTAP; - } - -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_main.c.orig -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c 2006-09-21 01:30:18.000000000 -0400 -@@ -48,6 +48,8 @@ - { 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID }, - /* Samsung MagicLAN SWL-2210P */ - { 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID }, -+ /* NETGEAR MA311 */ -+ { 0x1385, 0x3872, PCI_ANY_ID, PCI_ANY_ID }, - { 0 } - }; - -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_pci.c.orig -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c 2006-09-21 01:30:18.000000000 -0400 -@@ -101,6 +101,7 @@ - { 0xc250, 0x0002 } /* EMTAC A2424i */, - { 0xd601, 0x0002 } /* Z-Com XI300 */, - { 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */, -+ { 0xd601, 0x0010 } /* Zcomax XI-325H 100mW */, - { 0, 0} - }; - -Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_plx.c.orig -diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h ---- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h 2006-09-21 01:26:27.000000000 -0400 -+++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h 2006-09-21 01:30:18.000000000 -0400 -@@ -575,6 +575,7 @@ - int (*hw_config)(struct net_device *dev, int initial); - void (*hw_reset)(struct net_device *dev); - void (*hw_shutdown)(struct net_device *dev, int no_disable); -+ int (*monitor_enable)(struct net_device *dev); - int (*reset_port)(struct net_device *dev); - void (*schedule_reset)(local_info_t *local); - int (*download)(local_info_t *local, diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/htcuni-acx.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/htcuni-acx.patch deleted file mode 100644 index 1ccebddc8d..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/htcuni-acx.patch +++ /dev/null @@ -1,33527 +0,0 @@ ---- - drivers/net/wireless/Kconfig | 31 - drivers/net/wireless/Makefile | 2 - drivers/net/wireless/acx/Kconfig | 113 - drivers/net/wireless/acx/Makefile | 21 - drivers/net/wireless/acx/acx.h | 14 - drivers/net/wireless/acx/acx_config.h | 50 - drivers/net/wireless/acx/acx_func.h | 710 ++ - drivers/net/wireless/acx/acx_hw.h | 18 - drivers/net/wireless/acx/acx_struct.h | 2114 ++++++++ - drivers/net/wireless/acx/common.c | 7388 ++++++++++++++++++++++++++++ - drivers/net/wireless/acx/conv.c | 504 + - drivers/net/wireless/acx/cs.c | 5703 +++++++++++++++++++++ - drivers/net/wireless/acx/htcsable_acx.c | 118 - drivers/net/wireless/acx/htcuniversal_acx.c | 108 - drivers/net/wireless/acx/hx4700_acx.c | 108 - drivers/net/wireless/acx/ioctl.c | 2748 ++++++++++ - drivers/net/wireless/acx/mem.c | 5363 ++++++++++++++++++++ - drivers/net/wireless/acx/pci.c | 4234 ++++++++++++++++ - drivers/net/wireless/acx/rx3000_acx.c | 110 - drivers/net/wireless/acx/setrate.c | 213 - drivers/net/wireless/acx/usb.c | 1922 +++++++ - drivers/net/wireless/acx/wlan.c | 424 + - drivers/net/wireless/acx/wlan_compat.h | 260 - drivers/net/wireless/acx/wlan_hdr.h | 497 + - drivers/net/wireless/acx/wlan_mgmt.h | 582 ++ - 25 files changed, 33355 insertions(+) - -Index: linux-2.6.23/drivers/net/wireless/acx/acx_config.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/acx_config.h 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,50 @@ -+#define ACX_RELEASE "v0.3.36" -+ -+/* -+ * Test out all the channels in reg domain 0x10 -+ */ -+#define ACX_ALLOW_ALLCHANNELS -+ -+/* set to 0 if you don't want any debugging code to be compiled in */ -+/* set to 1 if you want some debugging */ -+/* set to 2 if you want extensive debug log */ -+#define ACX_DEBUG 0 -+ -+/* -+ * Since we'll be changing channels a lot -+#define ACX_DEFAULT_MSG (L_ASSOC|L_INIT) -+*/ -+#define ACX_DEFAULT_MSG (L_ASSOC|L_INIT) -+ -+/* assume 32bit I/O width -+ * (16bit is also compatible with Compact Flash) */ -+#define ACX_IO_WIDTH 32 -+ -+/* Set this to 1 if you want monitor mode to use -+ * phy header. Currently it is not useful anyway since we -+ * don't know what useful info (if any) is in phy header. -+ * If you want faster/smaller code, say 0 here */ -+#define WANT_PHY_HDR 0 -+ -+/* whether to do Tx descriptor cleanup in softirq (i.e. not in IRQ -+ * handler) or not. Note that doing it later does slightly increase -+ * system load, so still do that stuff in the IRQ handler for now, -+ * even if that probably means worse latency */ -+#define TX_CLEANUP_IN_SOFTIRQ 0 -+ -+/* if you want very experimental 802.11 power save mode features */ -+#define POWER_SAVE_80211 0 -+ -+/* if you want very early packet fragmentation bits and pieces */ -+#define ACX_FRAGMENTATION 0 -+ -+/* Locking: */ -+/* very talkative */ -+/* #define PARANOID_LOCKING 1 */ -+/* normal (use when bug-free) */ -+#define DO_LOCKING 1 -+/* else locking is disabled! */ -+ -+/* 0 - normal mode */ -+/* 1 - development/debug: probe for IEs on modprobe */ -+#define CMD_DISCOVERY 0 -Index: linux-2.6.23/drivers/net/wireless/acx/acx_func.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/acx_func.h 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,710 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+ -+/*********************************************************************** -+** LOGGING -+** -+** - Avoid SHOUTING needlessly. Avoid excessive verbosity. -+** Gradually remove messages which are old debugging aids. -+** -+** - Use printk() for messages which are to be always logged. -+** Supply either 'acx:' or ':' prefix so that user -+** can figure out who's speaking among other kernel chatter. -+** acx: is for general issues (e.g. "acx: no firmware image!") -+** while : is related to a particular device -+** (think about multi-card setup). Double check that message -+** is not confusing to the average user. -+** -+** - use printk KERN_xxx level only if message is not a WARNING -+** but is INFO, ERR etc. -+** -+** - Use printk_ratelimited() for messages which may flood -+** (e.g. "rx DUP pkt!"). -+** -+** - Use log() for messages which may be omitted (and they -+** _will_ be omitted in non-debug builds). Note that -+** message levels may be disabled at compile-time selectively, -+** thus select them wisely. Example: L_DEBUG is the lowest -+** (most likely to be compiled out) -> use for less important stuff. -+** -+** - Do not print important stuff with log(), or else people -+** will never build non-debug driver. -+** -+** Style: -+** hex: capital letters, zero filled (e.g. 0x02AC) -+** str: dont start from capitals, no trailing periods ("tx: queue is stopped") -+*/ -+#if ACX_DEBUG > 1 -+ -+void log_fn_enter(const char *funcname); -+void log_fn_exit(const char *funcname); -+void log_fn_exit_v(const char *funcname, int v); -+ -+#define FN_ENTER \ -+ do { \ -+ if (unlikely(acx_debug & L_FUNC)) { \ -+ log_fn_enter(__func__); \ -+ } \ -+ } while (0) -+ -+#define FN_EXIT1(v) \ -+ do { \ -+ if (unlikely(acx_debug & L_FUNC)) { \ -+ log_fn_exit_v(__func__, v); \ -+ } \ -+ } while (0) -+#define FN_EXIT0 \ -+ do { \ -+ if (unlikely(acx_debug & L_FUNC)) { \ -+ log_fn_exit(__func__); \ -+ } \ -+ } while (0) -+ -+#else -+ -+#define FN_ENTER -+#define FN_EXIT1(v) -+#define FN_EXIT0 -+ -+#endif /* ACX_DEBUG > 1 */ -+ -+ -+#if ACX_DEBUG -+ -+#define log(chan, args...) \ -+ do { \ -+ if (acx_debug & (chan)) \ -+ printk(KERN_DEBUG args); \ -+ } while (0) -+#define printk_ratelimited(args...) printk(args) -+ -+#else /* Non-debug build: */ -+ -+#define log(chan, args...) -+/* Standard way of log flood prevention */ -+#define printk_ratelimited(args...) \ -+do { \ -+ if (printk_ratelimit()) \ -+ printk(args); \ -+} while (0) -+ -+#endif /* ACX_DEBUG */ -+ -+void acx_print_mac(const char *head, const u8 *mac, const char *tail); -+ -+/* Optimized out to nothing in non-debug build */ -+static inline void -+acxlog_mac(int level, const char *head, const u8 *mac, const char *tail) -+{ -+ if (acx_debug & level) { -+ acx_print_mac(head, mac, tail); -+ } -+} -+ -+ -+/*********************************************************************** -+** MAC address helpers -+*/ -+static inline void -+MAC_COPY(u8 *mac, const u8 *src) -+{ -+ *(u32*)mac = *(u32*)src; -+ ((u16*)mac)[2] = ((u16*)src)[2]; -+ /* kernel's memcpy will do the same: memcpy(dst, src, ETH_ALEN); */ -+} -+ -+static inline void -+MAC_FILL(u8 *mac, u8 val) -+{ -+ memset(mac, val, ETH_ALEN); -+} -+ -+static inline void -+MAC_BCAST(u8 *mac) -+{ -+ ((u16*)mac)[2] = *(u32*)mac = -1; -+} -+ -+static inline void -+MAC_ZERO(u8 *mac) -+{ -+ ((u16*)mac)[2] = *(u32*)mac = 0; -+} -+ -+static inline int -+mac_is_equal(const u8 *a, const u8 *b) -+{ -+ /* can't beat this */ -+ return memcmp(a, b, ETH_ALEN) == 0; -+} -+ -+static inline int -+mac_is_bcast(const u8 *mac) -+{ -+ /* AND together 4 first bytes with sign-extended 2 last bytes -+ ** Only bcast address gives 0xffffffff. +1 gives 0 */ -+ return ( *(s32*)mac & ((s16*)mac)[2] ) + 1 == 0; -+} -+ -+static inline int -+mac_is_zero(const u8 *mac) -+{ -+ return ( *(u32*)mac | ((u16*)mac)[2] ) == 0; -+} -+ -+static inline int -+mac_is_directed(const u8 *mac) -+{ -+ return (mac[0] & 1)==0; -+} -+ -+static inline int -+mac_is_mcast(const u8 *mac) -+{ -+ return (mac[0] & 1) && !mac_is_bcast(mac); -+} -+ -+#define MACSTR "%02X:%02X:%02X:%02X:%02X:%02X" -+#define MAC(bytevector) \ -+ ((unsigned char *)bytevector)[0], \ -+ ((unsigned char *)bytevector)[1], \ -+ ((unsigned char *)bytevector)[2], \ -+ ((unsigned char *)bytevector)[3], \ -+ ((unsigned char *)bytevector)[4], \ -+ ((unsigned char *)bytevector)[5] -+ -+ -+/*********************************************************************** -+** Random helpers -+*/ -+#define TO_STRING(x) #x -+#define STRING(x) TO_STRING(x) -+ -+#define CLEAR_BIT(val, mask) ((val) &= ~(mask)) -+#define SET_BIT(val, mask) ((val) |= (mask)) -+ -+/* undefined if v==0 */ -+static inline unsigned int -+lowest_bit(u16 v) -+{ -+ unsigned int n = 0; -+ while (!(v & 0xf)) { v>>=4; n+=4; } -+ while (!(v & 1)) { v>>=1; n++; } -+ return n; -+} -+ -+/* undefined if v==0 */ -+static inline unsigned int -+highest_bit(u16 v) -+{ -+ unsigned int n = 0; -+ while (v>0xf) { v>>=4; n+=4; } -+ while (v>1) { v>>=1; n++; } -+ return n; -+} -+ -+/* undefined if v==0 */ -+static inline int -+has_only_one_bit(u16 v) -+{ -+ return ((v-1) ^ v) >= v; -+} -+ -+ -+static inline int -+is_hidden_essid(char *essid) -+{ -+ return (('\0' == essid[0]) || -+ ((' ' == essid[0]) && ('\0' == essid[1]))); -+} -+ -+/*********************************************************************** -+** LOCKING -+** We have adev->sem and adev->lock. -+** -+** We employ following naming convention in order to get locking right: -+** -+** acx_e_xxxx - external entry points called from process context. -+** It is okay to sleep. adev->sem is to be taken on entry. -+** acx_i_xxxx - external entry points possibly called from atomic context. -+** Sleeping is not allowed (and thus down(sem) is not legal!) -+** acx_s_xxxx - potentially sleeping functions. Do not ever call under lock! -+** acx_l_xxxx - functions which expect lock to be already taken. -+** rest - non-sleeping functions which do not require locking -+** but may be run under lock -+** -+** A small number of local helpers do not have acx_[eisl]_ prefix. -+** They are always close to caller and are to be reviewed locally. -+** -+** Theory of operation: -+** -+** All process-context entry points (_e_ functions) take sem -+** immediately. IRQ handler and other 'atomic-context' entry points -+** (_i_ functions) take lock immediately on entry, but dont take sem -+** because that might sleep. -+** -+** Thus *all* code is either protected by sem or lock, or both. -+** -+** Code which must not run concurrently with IRQ takes lock. -+** Such code is marked with _l_. -+** -+** This results in the following rules of thumb useful in code review: -+** -+** + If a function calls _s_ fn, it must be an _s_ itself. -+** + You can call _l_ fn only (a) from another _l_ fn -+** or (b) from _s_, _e_ or _i_ fn by taking lock, calling _l_, -+** and dropping lock. -+** + All IRQ code runs under lock. -+** + Any _s_ fn is running under sem. -+** + Code under sem can race only with IRQ code. -+** + Code under sem+lock cannot race with anything. -+*/ -+ -+/* These functions *must* be inline or they will break horribly on SPARC, due -+ * to its weird semantics for save/restore flags */ -+ -+#if defined(PARANOID_LOCKING) /* Lock debugging */ -+ -+void acx_lock_debug(acx_device_t *adev, const char* where); -+void acx_unlock_debug(acx_device_t *adev, const char* where); -+void acx_down_debug(acx_device_t *adev, const char* where); -+void acx_up_debug(acx_device_t *adev, const char* where); -+void acx_lock_unhold(void); -+void acx_sem_unhold(void); -+ -+static inline void -+acx_lock_helper(acx_device_t *adev, unsigned long *fp, const char* where) -+{ -+ acx_lock_debug(adev, where); -+ spin_lock_irqsave(&adev->lock, *fp); -+} -+static inline void -+acx_unlock_helper(acx_device_t *adev, unsigned long *fp, const char* where) -+{ -+ acx_unlock_debug(adev, where); -+ spin_unlock_irqrestore(&adev->lock, *fp); -+} -+static inline void -+acx_down_helper(acx_device_t *adev, const char* where) -+{ -+ acx_down_debug(adev, where); -+} -+static inline void -+acx_up_helper(acx_device_t *adev, const char* where) -+{ -+ acx_up_debug(adev, where); -+} -+#define acx_lock(adev, flags) acx_lock_helper(adev, &(flags), __FILE__ ":" STRING(__LINE__)) -+#define acx_unlock(adev, flags) acx_unlock_helper(adev, &(flags), __FILE__ ":" STRING(__LINE__)) -+#define acx_sem_lock(adev) acx_down_helper(adev, __FILE__ ":" STRING(__LINE__)) -+#define acx_sem_unlock(adev) acx_up_helper(adev, __FILE__ ":" STRING(__LINE__)) -+ -+#elif defined(DO_LOCKING) -+ -+#define acx_lock(adev, flags) spin_lock_irqsave(&adev->lock, flags) -+#define acx_unlock(adev, flags) spin_unlock_irqrestore(&adev->lock, flags) -+#define acx_sem_lock(adev) down(&adev->sem) -+#define acx_sem_unlock(adev) up(&adev->sem) -+#define acx_lock_unhold() ((void)0) -+#define acx_sem_unhold() ((void)0) -+ -+#else /* no locking! :( */ -+ -+#define acx_lock(adev, flags) ((void)0) -+#define acx_unlock(adev, flags) ((void)0) -+#define acx_sem_lock(adev) ((void)0) -+#define acx_sem_unlock(adev) ((void)0) -+#define acx_lock_unhold() ((void)0) -+#define acx_sem_unhold() ((void)0) -+ -+#endif -+ -+ -+/*********************************************************************** -+*/ -+ -+/* Can race with rx path (which is not protected by sem): -+** rx -> process_[re]assocresp() -> set_status(ASSOCIATED) -> wake_queue() -+** Can race with tx_complete IRQ: -+** IRQ -> acxpci_l_clean_txdesc -> acx_wake_queue -+** Review carefully all callsites */ -+static inline void -+acx_stop_queue(struct net_device *ndev, const char *msg) -+{ -+ if (netif_queue_stopped(ndev)) -+ return; -+ -+ netif_stop_queue(ndev); -+ if (msg) -+ log(L_BUFT, "tx: stop queue %s\n", msg); -+} -+ -+static inline int -+acx_queue_stopped(struct net_device *ndev) -+{ -+ return netif_queue_stopped(ndev); -+} -+ -+/* -+static inline void -+acx_start_queue(struct net_device *ndev, const char *msg) -+{ -+ netif_start_queue(ndev); -+ if (msg) -+ log(L_BUFT, "tx: start queue %s\n", msg); -+} -+*/ -+ -+static inline void -+acx_wake_queue(struct net_device *ndev, const char *msg) -+{ -+ netif_wake_queue(ndev); -+ if (msg) -+ log(L_BUFT, "tx: wake queue %s\n", msg); -+} -+ -+static inline void -+acx_carrier_off(struct net_device *ndev, const char *msg) -+{ -+ netif_carrier_off(ndev); -+ if (msg) -+ log(L_BUFT, "tx: carrier off %s\n", msg); -+} -+ -+static inline void -+acx_carrier_on(struct net_device *ndev, const char *msg) -+{ -+ netif_carrier_on(ndev); -+ if (msg) -+ log(L_BUFT, "tx: carrier on %s\n", msg); -+} -+ -+/* This function does not need locking UNLESS you call it -+** as acx_set_status(ACX_STATUS_4_ASSOCIATED), bacause this can -+** wake queue. This can race with stop_queue elsewhere. */ -+void acx_set_status(acx_device_t *adev, u16 status); -+ -+ -+/*********************************************************************** -+** Communication with firmware -+*/ -+#define CMD_TIMEOUT_MS(n) (n) -+#define ACX_CMD_TIMEOUT_DEFAULT CMD_TIMEOUT_MS(50) -+ -+#if ACX_DEBUG -+ -+/* We want to log cmd names */ -+int acxpci_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr); -+int acxmem_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr); -+int acxusb_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr); -+static inline int -+acx_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr); -+ if (IS_PCI(adev)) -+ return acxpci_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr); -+ return acxusb_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr); -+} -+#define acx_s_issue_cmd(adev,cmd,param,len) \ -+ acx_s_issue_cmd_timeo_debug(adev,cmd,param,len,ACX_CMD_TIMEOUT_DEFAULT,#cmd) -+#define acx_s_issue_cmd_timeo(adev,cmd,param,len,timeo) \ -+ acx_s_issue_cmd_timeo_debug(adev,cmd,param,len,timeo,#cmd) -+int acx_s_configure_debug(acx_device_t *adev, void *pdr, int type, const char* str); -+#define acx_s_configure(adev,pdr,type) \ -+ acx_s_configure_debug(adev,pdr,type,#type) -+int acx_s_interrogate_debug(acx_device_t *adev, void *pdr, int type, const char* str); -+#define acx_s_interrogate(adev,pdr,type) \ -+ acx_s_interrogate_debug(adev,pdr,type,#type) -+ -+#else -+ -+int acxpci_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout); -+int acxmem_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout); -+int acxusb_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout); -+static inline int -+acx_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_s_issue_cmd_timeo(adev, cmd, param, len, timeout); -+ if (IS_PCI(adev)) -+ return acxpci_s_issue_cmd_timeo(adev, cmd, param, len, timeout); -+ return acxusb_s_issue_cmd_timeo(adev, cmd, param, len, timeout); -+} -+static inline int -+acx_s_issue_cmd(acx_device_t *adev, unsigned cmd, void *param, unsigned len) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT); -+ if (IS_PCI(adev)) -+ return acxpci_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT); -+ return acxusb_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT); -+} -+int acx_s_configure(acx_device_t *adev, void *pdr, int type); -+int acx_s_interrogate(acx_device_t *adev, void *pdr, int type); -+ -+#endif -+ -+void acx_s_cmd_start_scan(acx_device_t *adev); -+ -+ -+/*********************************************************************** -+** Ioctls -+*/ -+int -+acx111pci_ioctl_info( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra); -+int -+acx100pci_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra); -+int -+acx100mem_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra); -+ -+ -+/*********************************************************************** -+** /proc -+*/ -+#ifdef CONFIG_PROC_FS -+int acx_proc_register_entries(const struct net_device *ndev); -+int acx_proc_unregister_entries(const struct net_device *ndev); -+#else -+static inline int -+acx_proc_register_entries(const struct net_device *ndev) { return OK; } -+static inline int -+acx_proc_unregister_entries(const struct net_device *ndev) { return OK; } -+#endif -+ -+ -+/*********************************************************************** -+*/ -+firmware_image_t *acx_s_read_fw(struct device *dev, const char *file, u32 *size); -+int acxpci_s_upload_radio(acx_device_t *adev); -+int acxmem_s_upload_radio(acx_device_t *adev); -+ -+ -+/*********************************************************************** -+** Unsorted yet :) -+*/ -+int acxpci_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf); -+int acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf); -+int acxusb_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf); -+static inline int -+acx_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_s_read_phy_reg(adev, reg, charbuf); -+ if (IS_PCI(adev)) -+ return acxpci_s_read_phy_reg(adev, reg, charbuf); -+ return acxusb_s_read_phy_reg(adev, reg, charbuf); -+} -+ -+int acxpci_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value); -+int acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value); -+int acxusb_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value); -+static inline int -+acx_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_s_write_phy_reg(adev, reg, value); -+ if (IS_PCI(adev)) -+ return acxpci_s_write_phy_reg(adev, reg, value); -+ return acxusb_s_write_phy_reg(adev, reg, value); -+} -+ -+tx_t* acxpci_l_alloc_tx(acx_device_t *adev); -+tx_t* acxmem_l_alloc_tx(acx_device_t *adev); -+tx_t* acxusb_l_alloc_tx(acx_device_t *adev); -+static inline tx_t* -+acx_l_alloc_tx(acx_device_t *adev) -+{ -+ if (IS_MEM(adev)) -+ return acxmem_l_alloc_tx(adev); -+ if (IS_PCI(adev)) -+ return acxpci_l_alloc_tx(adev); -+ return acxusb_l_alloc_tx(adev); -+} -+ -+void acxusb_l_dealloc_tx(tx_t *tx_opaque); -+void acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque); -+static inline void -+acx_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque) -+{ -+#ifdef ACX_MEM -+ acxmem_l_dealloc_tx (adev, tx_opaque); -+#else -+ if (IS_USB(adev)) -+ acxusb_l_dealloc_tx(tx_opaque); -+#endif -+} -+ -+void* acxpci_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque); -+void* acxmem_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque); -+void* acxusb_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque); -+static inline void* -+acx_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque) -+{ -+#if defined (ACX_MEM) -+ return acxmem_l_get_txbuf(adev, tx_opaque); -+#else -+ if (IS_PCI(adev)) -+ return acxpci_l_get_txbuf(adev, tx_opaque); -+ return acxusb_l_get_txbuf(adev, tx_opaque); -+#endif -+} -+ -+void acxpci_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len); -+void acxmem_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len); -+void acxusb_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len); -+static inline void -+acx_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len) -+{ -+#if defined (ACX_MEM) -+ acxmem_l_tx_data(adev, tx_opaque, len); -+#else -+ if (IS_PCI(adev)) -+ acxpci_l_tx_data(adev, tx_opaque, len); -+ else -+ acxusb_l_tx_data(adev, tx_opaque, len); -+#endif -+} -+ -+static inline wlan_hdr_t* -+acx_get_wlan_hdr(acx_device_t *adev, const rxbuffer_t *rxbuf) -+{ -+ return (wlan_hdr_t*)((u8*)&rxbuf->hdr_a3 + adev->phy_header_len); -+} -+ -+void acxpci_l_power_led(acx_device_t *adev, int enable); -+int acxpci_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf); -+unsigned int acxpci_l_clean_txdesc(acx_device_t *adev); -+void acxpci_l_clean_txdesc_emergency(acx_device_t *adev); -+int acxpci_s_create_hostdesc_queues(acx_device_t *adev); -+void acxpci_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start); -+void acxpci_free_desc_queues(acx_device_t *adev); -+char* acxpci_s_proc_diag_output(char *p, acx_device_t *adev); -+int acxpci_proc_eeprom_output(char *p, acx_device_t *adev); -+void acxpci_set_interrupt_mask(acx_device_t *adev); -+int acx100pci_s_set_tx_level(acx_device_t *adev, u8 level_dbm); -+ -+void acxmem_l_power_led(acx_device_t *adev, int enable); -+int acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf); -+unsigned int acxmem_l_clean_txdesc(acx_device_t *adev); -+void acxmem_l_clean_txdesc_emergency(acx_device_t *adev); -+int acxmem_s_create_hostdesc_queues(acx_device_t *adev); -+void acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start); -+void acxmem_free_desc_queues(acx_device_t *adev); -+char* acxmem_s_proc_diag_output(char *p, acx_device_t *adev); -+int acxmem_proc_eeprom_output(char *p, acx_device_t *adev); -+void acxmem_set_interrupt_mask(acx_device_t *adev); -+int acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm); -+ -+void acx_s_msleep(int ms); -+int acx_s_init_mac(acx_device_t *adev); -+void acx_set_reg_domain(acx_device_t *adev, unsigned char reg_dom_id); -+void acx_set_timer(acx_device_t *adev, int timeout_us); -+void acx_update_capabilities(acx_device_t *adev); -+void acx_s_start(acx_device_t *adev); -+ -+void acx_s_update_card_settings(acx_device_t *adev); -+void acx_s_parse_configoption(acx_device_t *adev, const acx111_ie_configoption_t *pcfg); -+void acx_l_update_ratevector(acx_device_t *adev); -+ -+void acx_init_task_scheduler(acx_device_t *adev); -+void acx_schedule_task(acx_device_t *adev, unsigned int set_flag); -+ -+int acx_e_ioctl_old(struct net_device *ndev, struct ifreq *ifr, int cmd); -+ -+client_t *acx_l_sta_list_get(acx_device_t *adev, const u8 *address); -+void acx_l_sta_list_del(acx_device_t *adev, client_t *clt); -+ -+int acx_l_transmit_disassoc(acx_device_t *adev, client_t *clt); -+void acx_i_timer(unsigned long a); -+int acx_s_complete_scan(acx_device_t *adev); -+ -+struct sk_buff *acx_rxbuf_to_ether(acx_device_t *adev, rxbuffer_t *rxbuf); -+int acx_ether_to_txbuf(acx_device_t *adev, void *txbuf, const struct sk_buff *skb); -+ -+u8 acx_signal_determine_quality(u8 signal, u8 noise); -+ -+void acx_l_process_rxbuf(acx_device_t *adev, rxbuffer_t *rxbuf); -+void acx_l_handle_txrate_auto(acx_device_t *adev, struct client *txc, -+ u16 intended_rate, u8 rate100, u16 rate111, u8 error, -+ int pkts_to_ignore); -+ -+void acx_dump_bytes(const void *, int); -+void acx_log_bad_eid(wlan_hdr_t* hdr, int len, wlan_ie_t* ie_ptr); -+ -+u8 acx_rate111to100(u16); -+ -+void acx_s_set_defaults(acx_device_t *adev); -+ -+#if !ACX_DEBUG -+static inline const char* acx_get_packet_type_string(u16 fc) { return ""; } -+#else -+const char* acx_get_packet_type_string(u16 fc); -+#endif -+const char* acx_cmd_status_str(unsigned int state); -+ -+int acx_i_start_xmit(struct sk_buff *skb, struct net_device *ndev); -+ -+void great_inquisitor(acx_device_t *adev); -+ -+void acx_s_get_firmware_version(acx_device_t *adev); -+void acx_display_hardware_details(acx_device_t *adev); -+ -+int acx_e_change_mtu(struct net_device *ndev, int mtu); -+struct net_device_stats* acx_e_get_stats(struct net_device *ndev); -+struct iw_statistics* acx_e_get_wireless_stats(struct net_device *ndev); -+ -+#ifdef ACX_MEM -+int __init acxmem_e_init_module(void); -+void __exit acxmem_e_cleanup_module(void); -+void acxmem_e_release(struct device *dev); -+#else -+int __init acxpci_e_init_module(void); -+int __init acxusb_e_init_module(void); -+void __exit acxpci_e_cleanup_module(void); -+void __exit acxusb_e_cleanup_module(void); -+#endif -+int __init acx_cs_init(void); -+void __exit acx_cs_cleanup(void); -Index: linux-2.6.23/drivers/net/wireless/acx/acx.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/acx.h 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,14 @@ -+#if defined(CONFIG_ACX_MEM) && !defined(ACX_MEM) -+#define ACX_MEM -+#endif -+ -+#if defined(CONFIG_ACX_CS) && !defined(ACX_MEM) -+#define ACX_MEM -+#endif -+ -+#include "acx_config.h" -+#include "wlan_compat.h" -+#include "wlan_hdr.h" -+#include "wlan_mgmt.h" -+#include "acx_struct.h" -+#include "acx_func.h" -Index: linux-2.6.23/drivers/net/wireless/acx/acx_hw.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/acx_hw.h 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,18 @@ -+/* -+ * Interface for ACX slave memory driver -+ * -+ * Copyright (c) 2006 SDG Systems, LLC -+ * -+ * GPL -+ * -+ */ -+ -+#ifndef _ACX_HW_H -+#define _ACX_HW_H -+ -+struct acx_hardware_data { -+ int (*start_hw)( void ); -+ int (*stop_hw)( void ); -+}; -+ -+#endif /* _ACX_HW_H */ -Index: linux-2.6.23/drivers/net/wireless/acx/acx_struct.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/acx_struct.h 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,2114 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** Forward declarations of types -+*/ -+typedef struct tx tx_t; -+typedef struct acx_device acx_device_t; -+typedef struct client client_t; -+typedef struct rxdesc rxdesc_t; -+typedef struct txdesc txdesc_t; -+typedef struct rxhostdesc rxhostdesc_t; -+typedef struct txhostdesc txhostdesc_t; -+ -+ -+/*********************************************************************** -+** Debug / log functionality -+*/ -+enum { -+ L_LOCK = (ACX_DEBUG>1)*0x0001, /* locking debug log */ -+ L_INIT = (ACX_DEBUG>0)*0x0002, /* special card initialization logging */ -+ L_IRQ = (ACX_DEBUG>0)*0x0004, /* interrupt stuff */ -+ L_ASSOC = (ACX_DEBUG>0)*0x0008, /* assocation (network join) and station log */ -+ L_FUNC = (ACX_DEBUG>1)*0x0020, /* logging of function enter / leave */ -+ L_XFER = (ACX_DEBUG>1)*0x0080, /* logging of transfers and mgmt */ -+ L_DATA = (ACX_DEBUG>1)*0x0100, /* logging of transfer data */ -+ L_DEBUG = (ACX_DEBUG>1)*0x0200, /* log of debug info */ -+ L_IOCTL = (ACX_DEBUG>0)*0x0400, /* log ioctl calls */ -+ L_CTL = (ACX_DEBUG>1)*0x0800, /* log of low-level ctl commands */ -+ L_BUFR = (ACX_DEBUG>1)*0x1000, /* debug rx buffer mgmt (ring buffer etc.) */ -+ L_XFER_BEACON = (ACX_DEBUG>1)*0x2000, /* also log beacon packets */ -+ L_BUFT = (ACX_DEBUG>1)*0x4000, /* debug tx buffer mgmt (ring buffer etc.) */ -+ L_USBRXTX = (ACX_DEBUG>0)*0x8000, /* debug USB rx/tx operations */ -+ L_BUF = L_BUFR + L_BUFT, -+ L_ANY = 0xffff -+}; -+ -+#if ACX_DEBUG -+extern unsigned int acx_debug; -+#else -+enum { acx_debug = 0 }; -+#endif -+ -+ -+/*********************************************************************** -+** Random helpers -+*/ -+#define ACX_PACKED __attribute__ ((packed)) -+ -+#define VEC_SIZE(a) (sizeof(a)/sizeof(a[0])) -+ -+/* Use worker_queues for 2.5/2.6 kernels and queue tasks for 2.4 kernels -+ (used for the 'bottom half' of the interrupt routine) */ -+ -+#include -+#define USE_WORKER_TASKS -+#define WORK_STRUCT struct work_struct -+#define SCHEDULE_WORK schedule_work -+#define FLUSH_SCHEDULED_WORK flush_scheduled_work -+ -+ -+/*********************************************************************** -+** Constants -+*/ -+#define OK 0 -+#define NOT_OK 1 -+ -+/* The supported chip models */ -+#define CHIPTYPE_ACX100 1 -+#define CHIPTYPE_ACX111 2 -+ -+#define IS_ACX100(adev) ((adev)->chip_type == CHIPTYPE_ACX100) -+#define IS_ACX111(adev) ((adev)->chip_type == CHIPTYPE_ACX111) -+ -+/* Supported interfaces */ -+#define DEVTYPE_PCI 0 -+#define DEVTYPE_USB 1 -+#define DEVTYPE_MEM 2 -+ -+#if !defined(CONFIG_ACX_PCI) && !defined(CONFIG_ACX_USB) && !defined(CONFIG_ACX_MEM) && !defined(CONFIG_ACX_CS) -+#error Driver must include PCI, USB, PCMCIA or memory mapped interface support. You selected none of them. -+#endif -+ -+#if defined(CONFIG_ACX_PCI) -+ #if !defined(CONFIG_ACX_USB) -+ #define IS_PCI(adev) 1 -+ #else -+ #define IS_PCI(adev) ((adev)->dev_type == DEVTYPE_PCI) -+ #endif -+#else -+ #define IS_PCI(adev) 0 -+#endif -+ -+#if defined(CONFIG_ACX_USB) -+ #if !defined(CONFIG_ACX_PCI) -+ #define IS_USB(adev) 1 -+ #else -+ #define IS_USB(adev) ((adev)->dev_type == DEVTYPE_USB) -+ #endif -+#else -+ #define IS_USB(adev) 0 -+#endif -+ -+#if defined(CONFIG_ACX_MEM) || defined(CONFIG_ACX_CS) -+ #define IS_MEM(adev) 1 -+#else -+ #define IS_MEM(adev) 0 -+#endif -+ -+/* Driver defaults */ -+#define DEFAULT_DTIM_INTERVAL 10 -+/* used to be 2048, but FreeBSD driver changed it to 4096 to work properly -+** in noisy wlans */ -+#define DEFAULT_MSDU_LIFETIME 4096 -+#define DEFAULT_RTS_THRESHOLD 2312 /* max. size: disable RTS mechanism */ -+#define DEFAULT_BEACON_INTERVAL 100 -+ -+#define ACX100_BAP_DATALEN_MAX 4096 -+#define ACX100_RID_GUESSING_MAXLEN 2048 /* I'm not really sure */ -+#define ACX100_RIDDATA_MAXLEN ACX100_RID_GUESSING_MAXLEN -+ -+/* Support Constants */ -+/* Radio type names, found in Win98 driver's TIACXLN.INF */ -+#define RADIO_MAXIM_0D 0x0d -+#define RADIO_RFMD_11 0x11 -+#define RADIO_RALINK_15 0x15 -+/* used in ACX111 cards (WG311v2, WL-121, ...): */ -+#define RADIO_RADIA_16 0x16 -+/* most likely *sometimes* used in ACX111 cards: */ -+#define RADIO_UNKNOWN_17 0x17 -+/* FwRad19.bin was found in a Safecom driver; must be an ACX111 radio: */ -+#define RADIO_UNKNOWN_19 0x19 -+#define RADIO_UNKNOWN_1B 0x1b /* radio in SafeCom SWLUT-54125 USB adapter; entirely unknown!! */ -+ -+/* Controller Commands */ -+/* can be found in table cmdTable in firmware "Rev. 1.5.0" (FW150) */ -+#define ACX1xx_CMD_RESET 0x00 -+#define ACX1xx_CMD_INTERROGATE 0x01 -+#define ACX1xx_CMD_CONFIGURE 0x02 -+#define ACX1xx_CMD_ENABLE_RX 0x03 -+#define ACX1xx_CMD_ENABLE_TX 0x04 -+#define ACX1xx_CMD_DISABLE_RX 0x05 -+#define ACX1xx_CMD_DISABLE_TX 0x06 -+#define ACX1xx_CMD_FLUSH_QUEUE 0x07 -+#define ACX1xx_CMD_SCAN 0x08 -+#define ACX1xx_CMD_STOP_SCAN 0x09 -+#define ACX1xx_CMD_CONFIG_TIM 0x0a -+#define ACX1xx_CMD_JOIN 0x0b -+#define ACX1xx_CMD_WEP_MGMT 0x0c -+#ifdef OLD_FIRMWARE_VERSIONS -+#define ACX100_CMD_HALT 0x0e /* mapped to unknownCMD in FW150 */ -+#else -+#define ACX1xx_CMD_MEM_READ 0x0d -+#define ACX1xx_CMD_MEM_WRITE 0x0e -+#endif -+#define ACX1xx_CMD_SLEEP 0x0f -+#define ACX1xx_CMD_WAKE 0x10 -+#define ACX1xx_CMD_UNKNOWN_11 0x11 /* mapped to unknownCMD in FW150 */ -+#define ACX100_CMD_INIT_MEMORY 0x12 -+#define ACX1FF_CMD_DISABLE_RADIO 0x12 /* new firmware? TNETW1450? */ -+#define ACX1xx_CMD_CONFIG_BEACON 0x13 -+#define ACX1xx_CMD_CONFIG_PROBE_RESPONSE 0x14 -+#define ACX1xx_CMD_CONFIG_NULL_DATA 0x15 -+#define ACX1xx_CMD_CONFIG_PROBE_REQUEST 0x16 -+#define ACX1xx_CMD_FCC_TEST 0x17 -+#define ACX1xx_CMD_RADIOINIT 0x18 -+#define ACX111_CMD_RADIOCALIB 0x19 -+#define ACX1FF_CMD_NOISE_HISTOGRAM 0x1c /* new firmware? TNETW1450? */ -+#define ACX1FF_CMD_RX_RESET 0x1d /* new firmware? TNETW1450? */ -+#define ACX1FF_CMD_LNA_CONTROL 0x20 /* new firmware? TNETW1450? */ -+#define ACX1FF_CMD_CONTROL_DBG_TRACE 0x21 /* new firmware? TNETW1450? */ -+ -+/* 'After Interrupt' Commands */ -+#define ACX_AFTER_IRQ_CMD_STOP_SCAN 0x01 -+#define ACX_AFTER_IRQ_CMD_ASSOCIATE 0x02 -+#define ACX_AFTER_IRQ_CMD_RADIO_RECALIB 0x04 -+#define ACX_AFTER_IRQ_UPDATE_CARD_CFG 0x08 -+#define ACX_AFTER_IRQ_TX_CLEANUP 0x10 -+#define ACX_AFTER_IRQ_COMPLETE_SCAN 0x20 -+#define ACX_AFTER_IRQ_RESTART_SCAN 0x40 -+ -+/*********************************************************************** -+** Tx/Rx buffer sizes and watermarks -+** -+** This will alloc and use DMAable buffers of -+** WLAN_A4FR_MAXLEN_WEP_FCS * (RX_CNT + TX_CNT) bytes -+** RX/TX_CNT=32 -> ~150k DMA buffers -+** RX/TX_CNT=16 -> ~75k DMA buffers -+** -+** 2005-10-10: reduced memory usage by lowering both to 16 -+*/ -+#define RX_CNT 16 -+#define TX_CNT 16 -+ -+/* we clean up txdescs when we have N free txdesc: */ -+#define TX_CLEAN_BACKLOG (TX_CNT/4) -+#define TX_START_CLEAN (TX_CNT - TX_CLEAN_BACKLOG) -+#define TX_EMERG_CLEAN 2 -+/* we stop queue if we have < N free txbufs: */ -+#define TX_STOP_QUEUE 3 -+/* we start queue if we have >= N free txbufs: */ -+#define TX_START_QUEUE 5 -+ -+/*********************************************************************** -+** Interrogate/Configure cmd constants -+** -+** NB: length includes JUST the data part of the IE -+** (does not include size of the (type,len) pair) -+** -+** TODO: seems that acx100, acx100usb, acx111 have some differences, -+** fix code with regard to this! -+*/ -+ -+#define DEF_IE(name, val, len) enum { ACX##name=val, ACX##name##_LEN=len } -+ -+/* Information Elements: Network Parameters, Static Configuration Entities */ -+/* these are handled by real_cfgtable in firmware "Rev 1.5.0" (FW150) */ -+DEF_IE(1xx_IE_UNKNOWN_00 ,0x0000, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(100_IE_ACX_TIMER ,0x0001, 0x10); -+DEF_IE(1xx_IE_POWER_MGMT ,0x0002, 0x06); /* TNETW1450: length 0x18!! */ -+DEF_IE(1xx_IE_QUEUE_CONFIG ,0x0003, 0x1c); -+DEF_IE(100_IE_BLOCK_SIZE ,0x0004, 0x02); -+DEF_IE(1FF_IE_SLOT_TIME ,0x0004, 0x08); /* later firmware versions only? */ -+DEF_IE(1xx_IE_MEMORY_CONFIG_OPTIONS ,0x0005, 0x14); -+DEF_IE(1FF_IE_QUEUE_HEAD ,0x0005, 0x14 /* FIXME: length? */); -+DEF_IE(1xx_IE_RATE_FALLBACK ,0x0006, 0x01); /* TNETW1450: length 2 */ -+DEF_IE(100_IE_WEP_OPTIONS ,0x0007, 0x03); -+DEF_IE(111_IE_RADIO_BAND ,0x0007, -1); -+DEF_IE(1FF_IE_TIMING_CFG ,0x0007, -1); /* later firmware versions; TNETW1450 only? */ -+DEF_IE(100_IE_SSID ,0x0008, 0x20); /* huh? */ -+DEF_IE(1xx_IE_MEMORY_MAP ,0x0008, 0x28); /* huh? TNETW1450 has length 0x40!! */ -+DEF_IE(1xx_IE_SCAN_STATUS ,0x0009, 0x04); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1xx_IE_ASSOC_ID ,0x000a, 0x02); -+DEF_IE(1xx_IE_UNKNOWN_0B ,0x000b, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1FF_IE_TX_POWER_LEVEL_TABLE ,0x000b, 0x18); /* later firmware versions; TNETW1450 only? */ -+DEF_IE(100_IE_UNKNOWN_0C ,0x000c, -1); /* very small implementation in FW150! */ -+/* ACX100 has an equivalent struct in the cmd mailbox directly after reset. -+ * 0x14c seems extremely large, will trash stack on failure (memset!) -+ * in case of small input struct --> OOPS! */ -+DEF_IE(111_IE_CONFIG_OPTIONS ,0x000c, 0x14c); -+DEF_IE(1xx_IE_FWREV ,0x000d, 0x18); -+DEF_IE(1xx_IE_FCS_ERROR_COUNT ,0x000e, 0x04); -+DEF_IE(1xx_IE_MEDIUM_USAGE ,0x000f, 0x08); -+DEF_IE(1xx_IE_RXCONFIG ,0x0010, 0x04); -+DEF_IE(100_IE_UNKNOWN_11 ,0x0011, -1); /* NONBINARY: large implementation in FW150! link quality readings or so? */ -+DEF_IE(111_IE_QUEUE_THRESH ,0x0011, -1); -+DEF_IE(100_IE_UNKNOWN_12 ,0x0012, -1); /* NONBINARY: VERY large implementation in FW150!! */ -+DEF_IE(111_IE_BSS_POWER_SAVE ,0x0012, /* -1 */ 2); -+DEF_IE(1xx_IE_FIRMWARE_STATISTICS ,0x0013, 0x9c); /* TNETW1450: length 0x134!! */ -+DEF_IE(1FF_IE_RX_INTR_CONFIG ,0x0014, 0x14); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1xx_IE_FEATURE_CONFIG ,0x0015, 0x08); -+DEF_IE(111_IE_KEY_CHOOSE ,0x0016, 0x04); /* for rekeying. really len=4?? */ -+DEF_IE(1FF_IE_MISC_CONFIG_TABLE ,0x0017, 0x04); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_WONE_CONFIG ,0x0018, -1); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_TID_CONFIG ,0x001a, 0x2c); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_CALIB_ASSESSMENT ,0x001e, 0x04); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_BEACON_FILTER_OPTIONS ,0x001f, 0x02); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_LOW_RSSI_THRESH_OPT ,0x0020, 0x04); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_NOISE_HISTOGRAM_RESULTS ,0x0021, 0x30); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_PACKET_DETECT_THRESH ,0x0023, 0x04); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_TX_CONFIG_OPTIONS ,0x0024, 0x04); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_CCA_THRESHOLD ,0x0025, 0x02); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_EVENT_MASK ,0x0026, 0x08); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_DTIM_PERIOD ,0x0027, 0x02); /* later firmware versions, TNETW1450 only? */ -+DEF_IE(1FF_IE_ACI_CONFIG_SET ,0x0029, 0x06); /* later firmware versions; maybe TNETW1450 only? */ -+DEF_IE(1FF_IE_EEPROM_VER ,0x0030, 0x04); /* later firmware versions; maybe TNETW1450 only? */ -+DEF_IE(1xx_IE_DOT11_STATION_ID ,0x1001, 0x06); -+DEF_IE(100_IE_DOT11_UNKNOWN_1002 ,0x1002, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(111_IE_DOT11_FRAG_THRESH ,0x1002, -1); /* mapped to cfgInvalid in FW150; TNETW1450 has length 2!! */ -+DEF_IE(100_IE_DOT11_BEACON_PERIOD ,0x1003, 0x02); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1xx_IE_DOT11_DTIM_PERIOD ,0x1004, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1FF_IE_DOT11_MAX_RX_LIFETIME ,0x1004, -1); /* later firmware versions; maybe TNETW1450 only? */ -+DEF_IE(1xx_IE_DOT11_SHORT_RETRY_LIMIT ,0x1005, 0x01); /* TNETW1450: length 2 */ -+DEF_IE(1xx_IE_DOT11_LONG_RETRY_LIMIT ,0x1006, 0x01); /* TNETW1450: length 2 */ -+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_WRITE ,0x1007, 0x20); /* configure default keys; TNETW1450 has length 0x24!! */ -+DEF_IE(1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME ,0x1008, 0x04); -+DEF_IE(1xx_IE_DOT11_GROUP_ADDR ,0x1009, -1); -+DEF_IE(1xx_IE_DOT11_CURRENT_REG_DOMAIN ,0x100a, 0x02); -+/* It's harmless to have larger struct. Use USB case always. */ -+DEF_IE(1xx_IE_DOT11_CURRENT_ANTENNA ,0x100b, 0x02); /* in fact len=1 for PCI */ -+DEF_IE(1xx_IE_DOT11_UNKNOWN_100C ,0x100c, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1xx_IE_DOT11_TX_POWER_LEVEL ,0x100d, 0x01); /* TNETW1450 has length 2!! */ -+DEF_IE(1xx_IE_DOT11_CURRENT_CCA_MODE ,0x100e, 0x02); /* in fact len=1 for PCI */ -+/* USB doesn't return anything - len==0?! */ -+DEF_IE(100_IE_DOT11_ED_THRESHOLD ,0x100f, 0x04); -+DEF_IE(1xx_IE_DOT11_WEP_DEFAULT_KEY_SET ,0x1010, 0x01); /* set default key ID; TNETW1450: length 2 */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1011 ,0x1011, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(1FF_IE_DOT11_CURR_5GHZ_REGDOM ,0x1011, -1); /* later firmware versions; maybe TNETW1450 only? */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1012 ,0x1012, -1); /* mapped to cfgInvalid in FW150 */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1013 ,0x1013, -1); /* mapped to cfgInvalid in FW150 */ -+ -+#if 0 -+/* Experimentally obtained on acx100, fw 1.9.8.b -+** -1 means that fw returned 'invalid IE' -+** 0200 FC00 nnnn... are test read contents: u16 type, u16 len, data -+** (AA are poison bytes marking bytes not written by fw) -+** -+** Looks like acx100 fw does not update len field (thus len=256-4=FC here) -+** A number of IEs seem to trash type,len fields -+** IEs marked 'huge' return gobs of data (no poison bytes remain) -+*/ -+DEF_IE(100_IE_INVAL_00, 0x0000, -1); -+DEF_IE(100_IE_INVAL_01, 0x0001, -1); /* IE_ACX_TIMER, len=16 on older fw */ -+DEF_IE(100_IE_POWER_MGMT, 0x0002, 4); /* 0200FC00 00040000 AAAAAAAA */ -+DEF_IE(100_IE_QUEUE_CONFIG, 0x0003, 28); /* 0300FC00 48060000 9CAD0000 0101AAAA DCB00000 E4B00000 9CAA0000 00AAAAAA */ -+DEF_IE(100_IE_BLOCK_SIZE, 0x0004, 2); /* 0400FC00 0001AAAA AAAAAAAA AAAAAAAA */ -+/* write only: */ -+DEF_IE(100_IE_MEMORY_CONFIG_OPTIONS, 0x0005, 20); -+DEF_IE(100_IE_RATE_FALLBACK, 0x0006, 1); /* 0600FC00 00AAAAAA AAAAAAAA AAAAAAAA */ -+/* write only: */ -+DEF_IE(100_IE_WEP_OPTIONS, 0x0007, 3); -+DEF_IE(100_IE_MEMORY_MAP, 0x0008, 40); /* huge: 0800FC00 30000000 6CA20000 70A20000... */ -+/* gives INVAL on read: */ -+DEF_IE(100_IE_SCAN_STATUS, 0x0009, -1); -+DEF_IE(100_IE_ASSOC_ID, 0x000a, 2); /* huge: 0A00FC00 00000000 01040800 00000000... */ -+DEF_IE(100_IE_INVAL_0B, 0x000b, -1); -+/* 'command rejected': */ -+DEF_IE(100_IE_CONFIG_OPTIONS, 0x000c, -3); -+DEF_IE(100_IE_FWREV, 0x000d, 24); /* 0D00FC00 52657620 312E392E 382E6200 AAAAAAAA AAAAAAAA 05050201 AAAAAAAA */ -+DEF_IE(100_IE_FCS_ERROR_COUNT, 0x000e, 4); -+DEF_IE(100_IE_MEDIUM_USAGE, 0x000f, 8); /* E41F0000 2D780300 FCC91300 AAAAAAAA */ -+DEF_IE(100_IE_RXCONFIG, 0x0010, 4); /* 1000FC00 00280000 AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_QUEUE_THRESH, 0x0011, 12); /* 1100FC00 AAAAAAAA 00000000 00000000 */ -+DEF_IE(100_IE_BSS_POWER_SAVE, 0x0012, 1); /* 1200FC00 00AAAAAA AAAAAAAA AAAAAAAA */ -+/* read only, variable len */ -+DEF_IE(100_IE_FIRMWARE_STATISTICS, 0x0013, 256); /* 0000AC00 00000000 ... */ -+DEF_IE(100_IE_INT_CONFIG, 0x0014, 20); /* 00000000 00000000 00000000 00000000 5D74D105 00000000 AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_FEATURE_CONFIG, 0x0015, 8); /* 1500FC00 16000000 AAAAAAAA AAAAAAAA */ -+/* returns 'invalid MAC': */ -+DEF_IE(100_IE_KEY_CHOOSE, 0x0016, -4); -+DEF_IE(100_IE_INVAL_17, 0x0017, -1); -+DEF_IE(100_IE_UNKNOWN_18, 0x0018, 0); /* null len?! 1800FC00 AAAAAAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_UNKNOWN_19, 0x0019, 256); /* huge: 1900FC00 9C1F00EA FEFFFFEA FEFFFFEA... */ -+DEF_IE(100_IE_INVAL_1A, 0x001A, -1); -+ -+DEF_IE(100_IE_DOT11_INVAL_1000, 0x1000, -1); -+DEF_IE(100_IE_DOT11_STATION_ID, 0x1001, 6); /* huge: 0110FC00 58B10E2F 03000000 00000000... */ -+DEF_IE(100_IE_DOT11_INVAL_1002, 0x1002, -1); -+DEF_IE(100_IE_DOT11_INVAL_1003, 0x1003, -1); -+DEF_IE(100_IE_DOT11_INVAL_1004, 0x1004, -1); -+DEF_IE(100_IE_DOT11_SHORT_RETRY_LIMIT, 0x1005, 1); -+DEF_IE(100_IE_DOT11_LONG_RETRY_LIMIT, 0x1006, 1); -+/* write only: */ -+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_WRITE, 0x1007, 32); -+DEF_IE(100_IE_DOT11_MAX_XMIT_MSDU_LIFETIME, 0x1008, 4); /* huge: 0810FC00 00020000 F4010000 00000000... */ -+/* undoc but returns something */ -+DEF_IE(100_IE_DOT11_GROUP_ADDR, 0x1009, 12); /* huge: 0910FC00 00000000 00000000 00000000... */ -+DEF_IE(100_IE_DOT11_CURRENT_REG_DOMAIN, 0x100a, 1); /* 0A10FC00 30AAAAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_DOT11_CURRENT_ANTENNA, 0x100b, 1); /* 0B10FC00 8FAAAAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_DOT11_INVAL_100C, 0x100c, -1); -+DEF_IE(100_IE_DOT11_TX_POWER_LEVEL, 0x100d, 2); /* 00000000 0100AAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_DOT11_CURRENT_CCA_MODE, 0x100e, 1); /* 0E10FC00 0DAAAAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_DOT11_ED_THRESHOLD, 0x100f, 4); /* 0F10FC00 70000000 AAAAAAAA AAAAAAAA */ -+/* set default key ID */ -+DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_SET, 0x1010, 1); /* 1010FC00 00AAAAAA AAAAAAAA AAAAAAAA */ -+DEF_IE(100_IE_DOT11_INVAL_1011, 0x1011, -1); -+DEF_IE(100_IE_DOT11_INVAL_1012, 0x1012, -1); -+DEF_IE(100_IE_DOT11_INVAL_1013, 0x1013, -1); -+DEF_IE(100_IE_DOT11_UNKNOWN_1014, 0x1014, 256); /* huge */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1015, 0x1015, 256); /* huge */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1016, 0x1016, 256); /* huge */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1017, 0x1017, 256); /* huge */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1018, 0x1018, 256); /* huge */ -+DEF_IE(100_IE_DOT11_UNKNOWN_1019, 0x1019, 256); /* huge */ -+#endif -+ -+#if 0 -+/* Experimentally obtained on PCI acx111 Xterasys XN-2522g, fw 1.2.1.34 -+** -1 means that fw returned 'invalid IE' -+** 0400 0800 nnnn... are test read contents: u16 type, u16 len, data -+** (AA are poison bytes marking bytes not written by fw) -+** -+** Looks like acx111 fw reports real len! -+*/ -+DEF_IE(111_IE_INVAL_00, 0x0000, -1); -+DEF_IE(111_IE_INVAL_01, 0x0001, -1); -+DEF_IE(111_IE_POWER_MGMT, 0x0002, 12); -+/* write only, variable len: 12 + rxqueue_cnt*8 + txqueue_cnt*4: */ -+DEF_IE(111_IE_MEMORY_CONFIG, 0x0003, 24); -+DEF_IE(111_IE_BLOCK_SIZE, 0x0004, 8); /* 04000800 AA00AAAA AAAAAAAA */ -+/* variable len: 8 + rxqueue_cnt*8 + txqueue_cnt*8: */ -+DEF_IE(111_IE_QUEUE_HEAD, 0x0005, 24); -+DEF_IE(111_IE_RATE_FALLBACK, 0x0006, 1); -+/* acx100 name:WEP_OPTIONS */ -+/* said to have len:1 (not true, actually returns 12 bytes): */ -+DEF_IE(111_IE_RADIO_BAND, 0x0007, 12); /* 07000C00 AAAA1F00 FF03AAAA AAAAAAAA */ -+DEF_IE(111_IE_MEMORY_MAP, 0x0008, 48); -+/* said to have len:4, but gives INVAL on read: */ -+DEF_IE(111_IE_SCAN_STATUS, 0x0009, -1); -+DEF_IE(111_IE_ASSOC_ID, 0x000a, 2); -+/* write only, len is not known: */ -+DEF_IE(111_IE_UNKNOWN_0B, 0x000b, 0); -+/* read only, variable len. I see 67 byte reads: */ -+DEF_IE(111_IE_CONFIG_OPTIONS, 0x000c, 67); /* 0C004300 01160500 ... */ -+DEF_IE(111_IE_FWREV, 0x000d, 24); -+DEF_IE(111_IE_FCS_ERROR_COUNT, 0x000e, 4); -+DEF_IE(111_IE_MEDIUM_USAGE, 0x000f, 8); -+DEF_IE(111_IE_RXCONFIG, 0x0010, 4); -+DEF_IE(111_IE_QUEUE_THRESH, 0x0011, 12); -+DEF_IE(111_IE_BSS_POWER_SAVE, 0x0012, 1); -+/* read only, variable len. I see 240 byte reads: */ -+DEF_IE(111_IE_FIRMWARE_STATISTICS, 0x0013, 240); /* 1300F000 00000000 ... */ -+/* said to have len=17. looks like fw pads it to 20: */ -+DEF_IE(111_IE_INT_CONFIG, 0x0014, 20); /* 14001400 00000000 00000000 00000000 00000000 00000000 */ -+DEF_IE(111_IE_FEATURE_CONFIG, 0x0015, 8); -+/* said to be name:KEY_INDICATOR, len:4, but gives INVAL on read: */ -+DEF_IE(111_IE_KEY_CHOOSE, 0x0016, -1); -+/* said to have len:4, but in fact returns 8: */ -+DEF_IE(111_IE_MAX_USB_XFR, 0x0017, 8); /* 17000800 00014000 00000000 */ -+DEF_IE(111_IE_INVAL_18, 0x0018, -1); -+DEF_IE(111_IE_INVAL_19, 0x0019, -1); -+/* undoc but returns something: */ -+/* huh, fw indicates len=20 but uses 4 more bytes in buffer??? */ -+DEF_IE(111_IE_UNKNOWN_1A, 0x001A, 20); /* 1A001400 AA00AAAA 0000020F FF030000 00020000 00000007 04000000 */ -+ -+DEF_IE(111_IE_DOT11_INVAL_1000, 0x1000, -1); -+DEF_IE(111_IE_DOT11_STATION_ID, 0x1001, 6); -+DEF_IE(111_IE_DOT11_FRAG_THRESH, 0x1002, 2); -+/* acx100 only? gives INVAL on read: */ -+DEF_IE(111_IE_DOT11_BEACON_PERIOD, 0x1003, -1); -+/* said to be MAX_RECV_MSDU_LIFETIME: */ -+DEF_IE(111_IE_DOT11_DTIM_PERIOD, 0x1004, 4); -+DEF_IE(111_IE_DOT11_SHORT_RETRY_LIMIT, 0x1005, 1); -+DEF_IE(111_IE_DOT11_LONG_RETRY_LIMIT, 0x1006, 1); -+/* acx100 only? gives INVAL on read: */ -+DEF_IE(111_IE_DOT11_WEP_DEFAULT_KEY_WRITE, 0x1007, -1); -+DEF_IE(111_IE_DOT11_MAX_XMIT_MSDU_LIFETIME, 0x1008, 4); -+/* undoc but returns something. maybe it's 2 multicast MACs to listen to? */ -+DEF_IE(111_IE_DOT11_GROUP_ADDR, 0x1009, 12); /* 09100C00 00000000 00000000 00000000 */ -+DEF_IE(111_IE_DOT11_CURRENT_REG_DOMAIN, 0x100a, 1); -+DEF_IE(111_IE_DOT11_CURRENT_ANTENNA, 0x100b, 2); -+DEF_IE(111_IE_DOT11_INVAL_100C, 0x100c, -1); -+DEF_IE(111_IE_DOT11_TX_POWER_LEVEL, 0x100d, 1); -+/* said to have len=1 but gives INVAL on read: */ -+DEF_IE(111_IE_DOT11_CURRENT_CCA_MODE, 0x100e, -1); -+/* said to have len=4 but gives INVAL on read: */ -+DEF_IE(111_IE_DOT11_ED_THRESHOLD, 0x100f, -1); -+/* set default key ID. write only: */ -+DEF_IE(111_IE_DOT11_WEP_DEFAULT_KEY_SET, 0x1010, 1); -+/* undoc but returns something: */ -+DEF_IE(111_IE_DOT11_UNKNOWN_1011, 0x1011, 1); /* 11100100 20 */ -+DEF_IE(111_IE_DOT11_INVAL_1012, 0x1012, -1); -+DEF_IE(111_IE_DOT11_INVAL_1013, 0x1013, -1); -+#endif -+ -+ -+/*********************************************************************** -+**Information Frames Structures -+*/ -+ -+/* Used in beacon frames and the like */ -+#define DOT11RATEBYTE_1 (1*2) -+#define DOT11RATEBYTE_2 (2*2) -+#define DOT11RATEBYTE_5_5 (5*2+1) -+#define DOT11RATEBYTE_11 (11*2) -+#define DOT11RATEBYTE_22 (22*2) -+#define DOT11RATEBYTE_6_G (6*2) -+#define DOT11RATEBYTE_9_G (9*2) -+#define DOT11RATEBYTE_12_G (12*2) -+#define DOT11RATEBYTE_18_G (18*2) -+#define DOT11RATEBYTE_24_G (24*2) -+#define DOT11RATEBYTE_36_G (36*2) -+#define DOT11RATEBYTE_48_G (48*2) -+#define DOT11RATEBYTE_54_G (54*2) -+#define DOT11RATEBYTE_BASIC 0x80 /* flags rates included in basic rate set */ -+ -+ -+/*********************************************************************** -+** rxbuffer_t -+** -+** This is the format of rx data returned by acx -+*/ -+ -+/* I've hoped it's a 802.11 PHY header, but no... -+ * so far, I've seen on acx111: -+ * 0000 3a00 0000 0000 IBSS Beacons -+ * 0000 3c00 0000 0000 ESS Beacons -+ * 0000 2700 0000 0000 Probe requests -+ * --vda -+ */ -+typedef struct phy_hdr { -+ u8 unknown[4]; -+ u8 acx111_unknown[4]; -+} ACX_PACKED phy_hdr_t; -+ -+/* seems to be a bit similar to hfa384x_rx_frame. -+ * These fields are still not quite obvious, though. -+ * Some seem to have different meanings... */ -+ -+#define RXBUF_HDRSIZE 12 -+#define RXBUF_BYTES_RCVD(adev, rxbuf) \ -+ ((le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0xfff) - (adev)->phy_header_len) -+#define RXBUF_BYTES_USED(rxbuf) \ -+ ((le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0xfff) + RXBUF_HDRSIZE) -+/* USBism */ -+#define RXBUF_IS_TXSTAT(rxbuf) (le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0x8000) -+/* -+mac_cnt_rcvd: -+ 12 bits: length of frame from control field to first byte of FCS -+ 3 bits: reserved -+ 1 bit: 1 = it's a tx status info, not a rx packet (USB only) -+ -+mac_cnt_mblks: -+ 6 bits: number of memory block used to store frame in adapter memory -+ 1 bit: Traffic Indicator bit in TIM of received Beacon was set -+ -+mac_status: 1 byte (bitmap): -+ 7 Matching BSSID -+ 6 Matching SSID -+ 5 BDCST Address 1 field is a broadcast -+ 4 VBM received beacon frame has more than one set bit (?!) -+ 3 TIM Set bit representing this station is set in TIM of received beacon -+ 2 GROUP Address 1 is a multicast -+ 1 ADDR1 Address 1 matches our MAC -+ 0 FCSGD FSC is good -+ -+phy_stat_baseband: 1 byte (bitmap): -+ 7 Preamble frame had a long preamble -+ 6 PLCP Error CRC16 error in PLCP header -+ 5 Unsup_Mod unsupported modulation -+ 4 Selected Antenna antenna 1 was used to receive this frame -+ 3 PBCC/CCK frame used: 1=PBCC, 0=CCK modulation -+ 2 OFDM frame used OFDM modulation -+ 1 TI Protection protection frame was detected -+ 0 Reserved -+ -+phy_plcp_signal: 1 byte: -+ Receive PLCP Signal field from the Baseband Processor -+ -+phy_level: 1 byte: -+ receive AGC gain level (can be used to measure receive signal strength) -+ -+phy_snr: 1 byte: -+ estimated noise power of equalized receive signal -+ at input of FEC decoder (can be used to measure receive signal quality) -+ -+time: 4 bytes: -+ timestamp sampled from either the Access Manager TSF counter -+ or free-running microsecond counter when the MAC receives -+ first byte of PLCP header. -+*/ -+ -+typedef struct rxbuffer { -+ u16 mac_cnt_rcvd; /* only 12 bits are len! (0xfff) */ -+ u8 mac_cnt_mblks; -+ u8 mac_status; -+ u8 phy_stat_baseband; /* bit 0x80: used LNA (Low-Noise Amplifier) */ -+ u8 phy_plcp_signal; -+ u8 phy_level; /* PHY stat */ -+ u8 phy_snr; /* PHY stat */ -+ u32 time; /* timestamp upon MAC rcv first byte */ -+/* 4-byte (acx100) or 8-byte (acx111) phy header will be here -+** if RX_CFG1_INCLUDE_PHY_HDR is in effect: -+** phy_hdr_t phy */ -+ wlan_hdr_a3_t hdr_a3; -+ /* maximally sized data part of wlan packet */ -+ u8 data_a3[WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN]; -+ /* can add hdr/data_a4 if needed */ -+} ACX_PACKED rxbuffer_t; -+ -+ -+/*--- Firmware statistics ----------------------------------------------------*/ -+ -+/* define a random 100 bytes more to catch firmware versions which -+ * provide a bigger struct */ -+#define FW_STATS_FUTURE_EXTENSION 100 -+ -+typedef struct fw_stats_tx { -+ u32 tx_desc_of; -+} ACX_PACKED fw_stats_tx_t; -+ -+typedef struct fw_stats_rx { -+ u32 rx_oom; -+ u32 rx_hdr_of; -+ u32 rx_hw_stuck; /* old: u32 rx_hdr_use_next */ -+ u32 rx_dropped_frame; -+ u32 rx_frame_ptr_err; -+ u32 rx_xfr_hint_trig; -+ u32 rx_aci_events; /* later versions only */ -+ u32 rx_aci_resets; /* later versions only */ -+} ACX_PACKED fw_stats_rx_t; -+ -+typedef struct fw_stats_dma { -+ u32 rx_dma_req; -+ u32 rx_dma_err; -+ u32 tx_dma_req; -+ u32 tx_dma_err; -+} ACX_PACKED fw_stats_dma_t; -+ -+typedef struct fw_stats_irq { -+ u32 cmd_cplt; -+ u32 fiq; -+ u32 rx_hdrs; -+ u32 rx_cmplt; -+ u32 rx_mem_of; -+ u32 rx_rdys; -+ u32 irqs; -+ u32 tx_procs; -+ u32 decrypt_done; -+ u32 dma_0_done; -+ u32 dma_1_done; -+ u32 tx_exch_complet; -+ u32 commands; -+ u32 rx_procs; -+ u32 hw_pm_mode_changes; -+ u32 host_acks; -+ u32 pci_pm; -+ u32 acm_wakeups; -+} ACX_PACKED fw_stats_irq_t; -+ -+typedef struct fw_stats_wep { -+ u32 wep_key_count; -+ u32 wep_default_key_count; -+ u32 dot11_def_key_mib; -+ u32 wep_key_not_found; -+ u32 wep_decrypt_fail; -+ u32 wep_pkt_decrypt; -+ u32 wep_decrypt_irqs; -+} ACX_PACKED fw_stats_wep_t; -+ -+typedef struct fw_stats_pwr { -+ u32 tx_start_ctr; -+ u32 no_ps_tx_too_short; -+ u32 rx_start_ctr; -+ u32 no_ps_rx_too_short; -+ u32 lppd_started; -+ u32 no_lppd_too_noisy; -+ u32 no_lppd_too_short; -+ u32 no_lppd_matching_frame; -+} ACX_PACKED fw_stats_pwr_t; -+ -+typedef struct fw_stats_mic { -+ u32 mic_rx_pkts; -+ u32 mic_calc_fail; -+} ACX_PACKED fw_stats_mic_t; -+ -+typedef struct fw_stats_aes { -+ u32 aes_enc_fail; -+ u32 aes_dec_fail; -+ u32 aes_enc_pkts; -+ u32 aes_dec_pkts; -+ u32 aes_enc_irq; -+ u32 aes_dec_irq; -+} ACX_PACKED fw_stats_aes_t; -+ -+typedef struct fw_stats_event { -+ u32 heartbeat; -+ u32 calibration; -+ u32 rx_mismatch; -+ u32 rx_mem_empty; -+ u32 rx_pool; -+ u32 oom_late; -+ u32 phy_tx_err; -+ u32 tx_stuck; -+} ACX_PACKED fw_stats_event_t; -+ -+/* mainly for size calculation only */ -+typedef struct fw_stats { -+ u16 type; -+ u16 len; -+ fw_stats_tx_t tx; -+ fw_stats_rx_t rx; -+ fw_stats_dma_t dma; -+ fw_stats_irq_t irq; -+ fw_stats_wep_t wep; -+ fw_stats_pwr_t pwr; -+ fw_stats_mic_t mic; -+ fw_stats_aes_t aes; -+ fw_stats_event_t evt; -+ u8 _padding[FW_STATS_FUTURE_EXTENSION]; -+} fw_stats_t; -+ -+/* Firmware version struct */ -+ -+typedef struct fw_ver { -+ u16 cmd; -+ u16 size; -+ char fw_id[20]; -+ u32 hw_id; -+} ACX_PACKED fw_ver_t; -+ -+#define FW_ID_SIZE 20 -+ -+typedef struct shared_queueindicator { -+ u32 indicator; -+ u16 host_lock; -+ u16 fw_lock; -+} ACX_PACKED queueindicator_t; -+ -+/*--- WEP stuff --------------------------------------------------------------*/ -+#define DOT11_MAX_DEFAULT_WEP_KEYS 4 -+ -+/* non-firmware struct, no packing necessary */ -+typedef struct wep_key { -+ size_t size; /* most often used member first */ -+ u8 index; -+ u8 key[29]; -+ u16 strange_filler; -+} wep_key_t; /* size = 264 bytes (33*8) */ -+/* FIXME: We don't have size 264! Or is there 2 bytes beyond the key -+ * (strange_filler)? */ -+ -+/* non-firmware struct, no packing necessary */ -+typedef struct key_struct { -+ u8 addr[ETH_ALEN]; /* 0x00 */ -+ u16 filler1; /* 0x06 */ -+ u32 filler2; /* 0x08 */ -+ u32 index; /* 0x0c */ -+ u16 len; /* 0x10 */ -+ u8 key[29]; /* 0x12; is this long enough??? */ -+} key_struct_t; /* size = 276. FIXME: where is the remaining space?? */ -+ -+ -+/*--- Client (peer) info -----------------------------------------------------*/ -+/* adev->sta_list[] is used for: -+** accumulating and processing of scan results -+** keeping client info in AP mode -+** keeping AP info in STA mode (AP is the only one 'client') -+** keeping peer info in ad-hoc mode -+** non-firmware struct --> no packing necessary */ -+enum { -+ CLIENT_EMPTY_SLOT_0 = 0, -+ CLIENT_EXIST_1 = 1, -+ CLIENT_AUTHENTICATED_2 = 2, -+ CLIENT_ASSOCIATED_3 = 3, -+ CLIENT_JOIN_CANDIDATE = 4 -+}; -+struct client { -+ /* most frequent access first */ -+ u8 used; /* misnamed, more like 'status' */ -+ struct client* next; -+ unsigned long mtime; /* last time we heard it, in jiffies */ -+ size_t essid_len; /* length of ESSID (without '\0') */ -+ u32 sir; /* Standard IR */ -+ u32 snr; /* Signal to Noise Ratio */ -+ u16 aid; /* association ID */ -+ u16 seq; /* from client's auth req */ -+ u16 auth_alg; /* from client's auth req */ -+ u16 cap_info; /* from client's assoc req */ -+ u16 rate_cap; /* what client supports (all rates) */ -+ u16 rate_bas; /* what client supports (basic rates) */ -+ u16 rate_cfg; /* what is allowed (by iwconfig etc) */ -+ u16 rate_cur; /* currently used rate mask */ -+ u8 rate_100; /* currently used rate byte (acx100 only) */ -+ u8 address[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; /* ad-hoc hosts can have bssid != mac */ -+ u8 channel; -+ u8 auth_step; -+ u8 ignore_count; -+ u8 fallback_count; -+ u8 stepup_count; -+ char essid[IW_ESSID_MAX_SIZE + 1]; /* ESSID and trailing '\0' */ -+/* FIXME: this one is too damn big */ -+ char challenge_text[WLAN_CHALLENGE_LEN]; -+}; -+ -+ -+/*********************************************************************** -+** Hardware structures -+*/ -+ -+/* An opaque typesafe helper type -+ * -+ * Some hardware fields are actually pointers, -+ * but they have to remain u32, since using ptr instead -+ * (8 bytes on 64bit systems!) would disrupt the fixed descriptor -+ * format the acx firmware expects in the non-user area. -+ * Since we cannot cram an 8 byte ptr into 4 bytes, we need to -+ * enforce that pointed to data remains in low memory -+ * (address value needs to fit in 4 bytes) on 64bit systems. -+ * -+ * This is easy to get wrong, thus we are using a small struct -+ * and special macros to access it. Macros will check for -+ * attempts to overflow an acx_ptr with value > 0xffffffff. -+ * -+ * Attempts to use acx_ptr without macros result in compile-time errors */ -+ -+typedef struct { -+ u32 v; -+} ACX_PACKED acx_ptr; -+ -+#if ACX_DEBUG -+#define CHECK32(n) BUG_ON(sizeof(n)>4 && (long)(n)>0xffffff00) -+#else -+#define CHECK32(n) ((void)0) -+#endif -+ -+/* acx_ptr <-> integer conversion */ -+#define cpu2acx(n) ({ CHECK32(n); ((acx_ptr){ .v = cpu_to_le32(n) }); }) -+#define acx2cpu(a) (le32_to_cpu(a.v)) -+ -+/* acx_ptr <-> pointer conversion */ -+#define ptr2acx(p) ({ CHECK32(p); ((acx_ptr){ .v = cpu_to_le32((u32)(long)(p)) }); }) -+#define acx2ptr(a) ((void*)le32_to_cpu(a.v)) -+ -+/* Values for rate field (acx100 only) */ -+#define RATE100_1 10 -+#define RATE100_2 20 -+#define RATE100_5 55 -+#define RATE100_11 110 -+#define RATE100_22 220 -+/* This bit denotes use of PBCC: -+** (PBCC encoding is usable with 11 and 22 Mbps speeds only) */ -+#define RATE100_PBCC511 0x80 -+ -+/* Bit values for rate111 field */ -+#define RATE111_1 0x0001 /* DBPSK */ -+#define RATE111_2 0x0002 /* DQPSK */ -+#define RATE111_5 0x0004 /* CCK or PBCC */ -+#define RATE111_6 0x0008 /* CCK-OFDM or OFDM */ -+#define RATE111_9 0x0010 /* CCK-OFDM or OFDM */ -+#define RATE111_11 0x0020 /* CCK or PBCC */ -+#define RATE111_12 0x0040 /* CCK-OFDM or OFDM */ -+#define RATE111_18 0x0080 /* CCK-OFDM or OFDM */ -+#define RATE111_22 0x0100 /* PBCC */ -+#define RATE111_24 0x0200 /* CCK-OFDM or OFDM */ -+#define RATE111_36 0x0400 /* CCK-OFDM or OFDM */ -+#define RATE111_48 0x0800 /* CCK-OFDM or OFDM */ -+#define RATE111_54 0x1000 /* CCK-OFDM or OFDM */ -+#define RATE111_RESERVED 0x2000 -+#define RATE111_PBCC511 0x4000 /* PBCC mod at 5.5 or 11Mbit (else CCK) */ -+#define RATE111_SHORTPRE 0x8000 /* short preamble */ -+/* Special 'try everything' value */ -+#define RATE111_ALL 0x1fff -+/* These bits denote acx100 compatible settings */ -+#define RATE111_ACX100_COMPAT 0x0127 -+/* These bits denote 802.11b compatible settings */ -+#define RATE111_80211B_COMPAT 0x0027 -+ -+/* Descriptor Ctl field bits -+ * init value is 0x8e, "idle" value is 0x82 (in idle tx descs) -+ */ -+#define DESC_CTL_SHORT_PREAMBLE 0x01 /* preamble type: 0 = long; 1 = short */ -+#define DESC_CTL_FIRSTFRAG 0x02 /* this is the 1st frag of the frame */ -+#define DESC_CTL_AUTODMA 0x04 -+#define DESC_CTL_RECLAIM 0x08 /* ready to reuse */ -+#define DESC_CTL_HOSTDONE 0x20 /* host has finished processing */ -+#define DESC_CTL_ACXDONE 0x40 /* acx has finished processing */ -+/* host owns the desc [has to be released last, AFTER modifying all other desc fields!] */ -+#define DESC_CTL_HOSTOWN 0x80 -+#define DESC_CTL_ACXDONE_HOSTOWN (DESC_CTL_ACXDONE | DESC_CTL_HOSTOWN) -+ -+/* Descriptor Status field -+ */ -+#define DESC_STATUS_FULL (1 << 31) -+ -+/* NB: some bits may be interesting for Monitor mode tx (aka Raw tx): */ -+#define DESC_CTL2_SEQ 0x01 /* don't increase sequence field */ -+#define DESC_CTL2_FCS 0x02 /* don't add the FCS */ -+#define DESC_CTL2_MORE_FRAG 0x04 -+#define DESC_CTL2_RETRY 0x08 /* don't increase retry field */ -+#define DESC_CTL2_POWER 0x10 /* don't increase power mgmt. field */ -+#define DESC_CTL2_RTS 0x20 /* do RTS/CTS magic before sending */ -+#define DESC_CTL2_WEP 0x40 /* encrypt this frame */ -+#define DESC_CTL2_DUR 0x80 /* don't increase duration field */ -+ -+/*********************************************************************** -+** PCI structures -+*/ -+/* IRQ Constants -+** (outside of "#ifdef PCI" because USB (mis)uses HOST_INT_SCAN_COMPLETE) */ -+#define HOST_INT_RX_DATA 0x0001 -+#define HOST_INT_TX_COMPLETE 0x0002 -+#define HOST_INT_TX_XFER 0x0004 -+#define HOST_INT_RX_COMPLETE 0x0008 -+#define HOST_INT_DTIM 0x0010 -+#define HOST_INT_BEACON 0x0020 -+#define HOST_INT_TIMER 0x0040 -+#define HOST_INT_KEY_NOT_FOUND 0x0080 -+#define HOST_INT_IV_ICV_FAILURE 0x0100 -+#define HOST_INT_CMD_COMPLETE 0x0200 -+#define HOST_INT_INFO 0x0400 -+#define HOST_INT_OVERFLOW 0x0800 -+#define HOST_INT_PROCESS_ERROR 0x1000 -+#define HOST_INT_SCAN_COMPLETE 0x2000 -+#define HOST_INT_FCS_THRESHOLD 0x4000 -+#define HOST_INT_UNKNOWN 0x8000 -+ -+/* Outside of "#ifdef PCI" because USB needs to know sizeof() -+** of txdesc and rxdesc: */ -+struct txdesc { -+ acx_ptr pNextDesc; /* pointer to next txdesc */ -+ acx_ptr HostMemPtr; /* 0x04 */ -+ acx_ptr AcxMemPtr; /* 0x08 */ -+ u32 tx_time; /* 0x0c */ -+ u16 total_length; /* 0x10 */ -+ u16 Reserved; /* 0x12 */ -+ -+/* The following 16 bytes do not change when acx100 owns the descriptor */ -+/* BUG: fw clears last byte of this area which is supposedly reserved -+** for driver use. amd64 blew up. We dare not use it now */ -+ u32 dummy[4]; -+ -+ u8 Ctl_8; /* 0x24, 8bit value */ -+ u8 Ctl2_8; /* 0x25, 8bit value */ -+ u8 error; /* 0x26 */ -+ u8 ack_failures; /* 0x27 */ -+ -+ union { -+ /* -+ * Packing doesn't work correctly on ARM unless unions are on -+ * 4 byte boundaries. -+ */ -+ struct { -+ u8 rts_failures; /* 0x28 */ -+ u8 rts_ok; /* 0x29 */ -+ u16 d1; -+ } ACX_PACKED rts; -+ struct { -+ u16 d1; -+ u8 rate; /* 0x2a */ -+ u8 queue_ctrl; /* 0x2b */ -+ } ACX_PACKED r1; -+ struct { -+ u16 d1; -+ u16 rate111; /* 0x2a */ -+ } ACX_PACKED r2; -+ } ACX_PACKED u; -+ u32 queue_info; /* 0x2c (acx100, reserved on acx111) */ -+} ACX_PACKED; /* size : 48 = 0x30 */ -+/* NB: acx111 txdesc structure is 4 byte larger */ -+/* All these 4 extra bytes are reserved. tx alloc code takes them into account */ -+ -+struct rxdesc { -+ acx_ptr pNextDesc; /* 0x00 */ -+ acx_ptr HostMemPtr; /* 0x04 */ -+ acx_ptr ACXMemPtr; /* 0x08 */ -+ u32 rx_time; /* 0x0c */ -+ u16 total_length; /* 0x10 */ -+ u16 WEP_length; /* 0x12 */ -+ u32 WEP_ofs; /* 0x14 */ -+ -+/* the following 16 bytes do not change when acx100 owns the descriptor */ -+ u8 driverWorkspace[16]; /* 0x18 */ -+ -+ u8 Ctl_8; -+ u8 rate; -+ u8 error; -+ u8 SNR; /* Signal-to-Noise Ratio */ -+ u8 RxLevel; -+ u8 queue_ctrl; -+ u16 unknown; -+ u32 unknown2; -+} ACX_PACKED; /* size 52 = 0x34 */ -+ -+#if defined(ACX_PCI) || defined(ACX_MEM) -+ -+/* Register I/O offsets */ -+#define ACX100_EEPROM_ID_OFFSET 0x380 -+ -+/* please add further ACX hardware register definitions only when -+ it turns out you need them in the driver, and please try to use -+ firmware functionality instead, since using direct I/O access instead -+ of letting the firmware do it might confuse the firmware's state -+ machine */ -+ -+/* ***** ABSOLUTELY ALWAYS KEEP OFFSETS IN SYNC WITH THE INITIALIZATION -+** OF THE I/O ARRAYS!!!! (grep for '^IO_ACX') ***** */ -+enum { -+ IO_ACX_SOFT_RESET = 0, -+ -+ IO_ACX_SLV_MEM_ADDR, -+ IO_ACX_SLV_MEM_DATA, -+ IO_ACX_SLV_MEM_CTL, -+ IO_ACX_SLV_END_CTL, -+ -+ IO_ACX_FEMR, /* Function Event Mask */ -+ -+ IO_ACX_INT_TRIG, -+ IO_ACX_IRQ_MASK, -+ IO_ACX_IRQ_STATUS_NON_DES, -+ IO_ACX_IRQ_STATUS_CLEAR, /* CLEAR = clear on read */ -+ IO_ACX_IRQ_ACK, -+ IO_ACX_HINT_TRIG, -+ -+ IO_ACX_ENABLE, -+ -+ IO_ACX_EEPROM_CTL, -+ IO_ACX_EEPROM_ADDR, -+ IO_ACX_EEPROM_DATA, -+ IO_ACX_EEPROM_CFG, -+ -+ IO_ACX_PHY_ADDR, -+ IO_ACX_PHY_DATA, -+ IO_ACX_PHY_CTL, -+ -+ IO_ACX_GPIO_OE, -+ -+ IO_ACX_GPIO_OUT, -+ -+ IO_ACX_CMD_MAILBOX_OFFS, -+ IO_ACX_INFO_MAILBOX_OFFS, -+ IO_ACX_EEPROM_INFORMATION, -+ -+ IO_ACX_EE_START, -+ IO_ACX_SOR_CFG, -+ IO_ACX_ECPU_CTRL -+}; -+/* ***** ABSOLUTELY ALWAYS KEEP OFFSETS IN SYNC WITH THE INITIALIZATION -+** OF THE I/O ARRAYS!!!! (grep for '^IO_ACX') ***** */ -+ -+/* Values for IO_ACX_INT_TRIG register: */ -+/* inform hw that rxdesc in queue needs processing */ -+#define INT_TRIG_RXPRC 0x08 -+/* inform hw that txdesc in queue needs processing */ -+#define INT_TRIG_TXPRC 0x04 -+/* ack that we received info from info mailbox */ -+#define INT_TRIG_INFOACK 0x02 -+/* inform hw that we have filled command mailbox */ -+#define INT_TRIG_CMD 0x01 -+ -+struct txhostdesc { -+ acx_ptr data_phy; /* 0x00 [u8 *] */ -+ u16 data_offset; /* 0x04 */ -+ u16 reserved; /* 0x06 */ -+ u16 Ctl_16; /* 16bit value, endianness!! */ -+ u16 length; /* 0x0a */ -+ acx_ptr desc_phy_next; /* 0x0c [txhostdesc *] */ -+ acx_ptr pNext; /* 0x10 [txhostdesc *] */ -+ u32 Status; /* 0x14, unused on Tx */ -+/* From here on you can use this area as you want (variable length, too!) */ -+ u8 *data; -+} ACX_PACKED; -+ -+struct rxhostdesc { -+ acx_ptr data_phy; /* 0x00 [rxbuffer_t *] */ -+ u16 data_offset; /* 0x04 */ -+ u16 reserved; /* 0x06 */ -+ u16 Ctl_16; /* 0x08; 16bit value, endianness!! */ -+ u16 length; /* 0x0a */ -+ acx_ptr desc_phy_next; /* 0x0c [rxhostdesc_t *] */ -+ acx_ptr pNext; /* 0x10 [rxhostdesc_t *] */ -+ u32 Status; /* 0x14 */ -+/* From here on you can use this area as you want (variable length, too!) */ -+ rxbuffer_t *data; -+} ACX_PACKED; -+ -+#endif /* ACX_PCI */ -+ -+/*********************************************************************** -+** USB structures and constants -+*/ -+#ifdef ACX_USB -+ -+/* Used for usb_txbuffer.desc field */ -+#define USB_TXBUF_TXDESC 0xA -+/* Size of header (everything up to data[]) */ -+#define USB_TXBUF_HDRSIZE 14 -+typedef struct usb_txbuffer { -+ u16 desc; -+ u16 mpdu_len; -+ u8 queue_index; -+ u8 rate; -+ u32 hostdata; -+ u8 ctrl1; -+ u8 ctrl2; -+ u16 data_len; -+ /* wlan packet content is placed here: */ -+ u8 data[WLAN_A4FR_MAXLEN_WEP_FCS]; -+} ACX_PACKED usb_txbuffer_t; -+ -+/* USB returns either rx packets (see rxbuffer) or -+** these "tx status" structs: */ -+typedef struct usb_txstatus { -+ u16 mac_cnt_rcvd; /* only 12 bits are len! (0xfff) */ -+ u8 queue_index; -+ u8 mac_status; /* seen 0x20 on tx failure */ -+ u32 hostdata; -+ u8 rate; -+ u8 ack_failures; -+ u8 rts_failures; -+ u8 rts_ok; -+} ACX_PACKED usb_txstatus_t; -+ -+typedef struct usb_tx { -+ unsigned busy:1; -+ struct urb *urb; -+ acx_device_t *adev; -+ /* actual USB bulk output data block is here: */ -+ usb_txbuffer_t bulkout; -+} usb_tx_t; -+ -+struct usb_rx_plain { -+ unsigned busy:1; -+ struct urb *urb; -+ acx_device_t *adev; -+ rxbuffer_t bulkin; -+}; -+ -+typedef struct usb_rx { -+ unsigned busy:1; -+ struct urb *urb; -+ acx_device_t *adev; -+ rxbuffer_t bulkin; -+ /* Make entire structure 4k. Report if it breaks something. */ -+ u8 padding[4*1024 - sizeof(struct usb_rx_plain)]; -+} usb_rx_t; -+#endif /* ACX_USB */ -+ -+ -+/* Config Option structs */ -+ -+typedef struct co_antennas { -+ u8 type; -+ u8 len; -+ u8 list[2]; -+} ACX_PACKED co_antennas_t; -+ -+typedef struct co_powerlevels { -+ u8 type; -+ u8 len; -+ u16 list[8]; -+} ACX_PACKED co_powerlevels_t; -+ -+typedef struct co_datarates { -+ u8 type; -+ u8 len; -+ u8 list[8]; -+} ACX_PACKED co_datarates_t; -+ -+typedef struct co_domains { -+ u8 type; -+ u8 len; -+ u8 list[6]; -+} ACX_PACKED co_domains_t; -+ -+typedef struct co_product_id { -+ u8 type; -+ u8 len; -+ u8 list[128]; -+} ACX_PACKED co_product_id_t; -+ -+typedef struct co_manuf_id { -+ u8 type; -+ u8 len; -+ u8 list[128]; -+} ACX_PACKED co_manuf_t; -+ -+typedef struct co_fixed { -+ char NVSv[8]; -+/* u16 NVS_vendor_offs; ACX111-only */ -+/* u16 unknown; ACX111-only */ -+ u8 MAC[6]; /* ACX100-only */ -+ u16 probe_delay; /* ACX100-only */ -+ u32 eof_memory; -+ u8 dot11CCAModes; -+ u8 dot11Diversity; -+ u8 dot11ShortPreambleOption; -+ u8 dot11PBCCOption; -+ u8 dot11ChannelAgility; -+ u8 dot11PhyType; /* FIXME: does 802.11 call it "dot11PHYType"? */ -+ u8 dot11TempType; -+ u8 table_count; -+} ACX_PACKED co_fixed_t; -+ -+typedef struct acx111_ie_configoption { -+ u16 type; -+ u16 len; -+/* Do not access below members directly, they are in fact variable length */ -+ co_fixed_t fixed; -+ co_antennas_t antennas; -+ co_powerlevels_t power_levels; -+ co_datarates_t data_rates; -+ co_domains_t domains; -+ co_product_id_t product_id; -+ co_manuf_t manufacturer; -+ u8 _padding[4]; -+} ACX_PACKED acx111_ie_configoption_t; -+ -+ -+/*********************************************************************** -+** Main acx per-device data structure -+*/ -+#define ACX_STATE_FW_LOADED 0x01 -+#define ACX_STATE_IFACE_UP 0x02 -+ -+/* MAC mode (BSS type) defines -+ * Note that they shouldn't be redefined, since they are also used -+ * during communication with firmware */ -+#define ACX_MODE_0_ADHOC 0 -+#define ACX_MODE_1_UNUSED 1 -+#define ACX_MODE_2_STA 2 -+#define ACX_MODE_3_AP 3 -+/* These are our own inventions. Sending these to firmware -+** makes it stop emitting beacons, which is exactly what we want -+** for these modes */ -+#define ACX_MODE_MONITOR 0xfe -+#define ACX_MODE_OFF 0xff -+/* 'Submode': identifies exact status of ADHOC/STA host */ -+#define ACX_STATUS_0_STOPPED 0 -+#define ACX_STATUS_1_SCANNING 1 -+#define ACX_STATUS_2_WAIT_AUTH 2 -+#define ACX_STATUS_3_AUTHENTICATED 3 -+#define ACX_STATUS_4_ASSOCIATED 4 -+ -+/* FIXME: this should be named something like struct acx_priv (typedef'd to -+ * acx_priv_t) */ -+ -+/* non-firmware struct, no packing necessary */ -+struct acx_device { -+ /* most frequent accesses first (dereferencing and cache line!) */ -+ -+ /*** Locking ***/ -+ /* FIXME: try to convert semaphore to more efficient mutex according -+ to Ingo Molnar's docs (but not before driver is in mainline or -+ pre-mutex Linux 2.6.10 is very outdated). */ -+ struct semaphore sem; -+ spinlock_t lock; -+#if defined(PARANOID_LOCKING) /* Lock debugging */ -+ const char *last_sem; -+ const char *last_lock; -+ unsigned long sem_time; -+ unsigned long lock_time; -+#endif -+#ifdef ACX_MEM -+ spinlock_t txbuf_lock; -+#endif -+ -+ /*** Linux network device ***/ -+ struct net_device *ndev; /* pointer to linux netdevice */ -+ -+ /*** Device statistics ***/ -+ struct net_device_stats stats; /* net device statistics */ -+#ifdef WIRELESS_EXT -+ struct iw_statistics wstats; /* wireless statistics */ -+#endif -+ /*** Power managment ***/ -+ struct pm_dev *pm; /* PM crap */ -+ -+ /*** Management timer ***/ -+ struct timer_list mgmt_timer; -+ -+ /*** Hardware identification ***/ -+ const char *chip_name; -+ u8 dev_type; -+ u8 chip_type; -+ u8 form_factor; -+ u8 radio_type; -+ u8 eeprom_version; -+ -+ /*** Config retrieved from EEPROM ***/ -+ char cfgopt_NVSv[8]; -+ u16 cfgopt_NVS_vendor_offs; -+ u8 cfgopt_MAC[6]; -+ u16 cfgopt_probe_delay; -+ u32 cfgopt_eof_memory; -+ u8 cfgopt_dot11CCAModes; -+ u8 cfgopt_dot11Diversity; -+ u8 cfgopt_dot11ShortPreambleOption; -+ u8 cfgopt_dot11PBCCOption; -+ u8 cfgopt_dot11ChannelAgility; -+ u8 cfgopt_dot11PhyType; -+ u8 cfgopt_dot11TempType; -+ co_antennas_t cfgopt_antennas; -+ co_powerlevels_t cfgopt_power_levels; -+ co_datarates_t cfgopt_data_rates; -+ co_domains_t cfgopt_domains; -+ co_product_id_t cfgopt_product_id; -+ co_manuf_t cfgopt_manufacturer; -+ -+ /*** Firmware identification ***/ -+ char firmware_version[FW_ID_SIZE+1]; -+ u32 firmware_numver; -+ u32 firmware_id; -+ const u16 *ie_len; -+ const u16 *ie_len_dot11; -+ -+ /*** Device state ***/ -+ u16 dev_state_mask; -+ u8 led_power; /* power LED status */ -+ u32 get_mask; /* mask of settings to fetch from the card */ -+ u32 set_mask; /* mask of settings to write to the card */ -+ -+ /* Barely used in USB case */ -+ u16 irq_status; -+ -+ u8 after_interrupt_jobs; /* mini job list for doing actions after an interrupt occurred */ -+ WORK_STRUCT after_interrupt_task; /* our task for after interrupt actions */ -+ -+ /*** scanning ***/ -+ u16 scan_count; /* number of times to do channel scan */ -+ u8 scan_mode; /* 0 == active, 1 == passive, 2 == background */ -+ u8 scan_rate; -+ u16 scan_duration; -+ u16 scan_probe_delay; -+#if WIRELESS_EXT > 15 -+ struct iw_spy_data spy_data; /* FIXME: needs to be implemented! */ -+#endif -+ -+ /*** Wireless network settings ***/ -+ /* copy of the device address (ifconfig hw ether) that we actually use -+ ** for 802.11; copied over from the network device's MAC address -+ ** (ifconfig) when it makes sense only */ -+ u8 dev_addr[MAX_ADDR_LEN]; -+ u8 bssid[ETH_ALEN]; /* the BSSID after having joined */ -+ u8 ap[ETH_ALEN]; /* The AP we want, FF:FF:FF:FF:FF:FF is any */ -+ u16 aid; /* The Association ID sent from the AP / last used AID if we're an AP */ -+ u16 mode; /* mode from iwconfig */ -+ int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */ -+ u16 status; /* 802.11 association status */ -+ u8 essid_active; /* specific ESSID active, or select any? */ -+ u8 essid_len; /* to avoid dozens of strlen() */ -+ /* INCLUDES \0 termination for easy printf - but many places -+ ** simply want the string data memcpy'd plus a length indicator! -+ ** Keep that in mind... */ -+ char essid[IW_ESSID_MAX_SIZE+1]; -+ /* essid we are going to use for association, in case of "essid 'any'" -+ ** and in case of hidden ESSID (use configured ESSID then) */ -+ char essid_for_assoc[IW_ESSID_MAX_SIZE+1]; -+ char nick[IW_ESSID_MAX_SIZE+1]; /* see essid! */ -+ u8 channel; -+ u8 reg_dom_id; /* reg domain setting */ -+ u16 reg_dom_chanmask; -+ u16 auth_or_assoc_retries; -+ u16 scan_retries; -+ unsigned long scan_start; /* YES, jiffies is defined as "unsigned long" */ -+ -+ /* stations known to us (if we're an ap) */ -+ client_t sta_list[32]; /* tab is larger than list, so that */ -+ client_t *sta_hash_tab[64]; /* hash collisions are not likely */ -+ client_t *ap_client; /* this one is our AP (STA mode only) */ -+ -+ int dup_count; -+ int nondup_count; -+ unsigned long dup_msg_expiry; -+ u16 last_seq_ctrl; /* duplicate packet detection */ -+ -+ /* 802.11 power save mode */ -+ u8 ps_wakeup_cfg; -+ u8 ps_listen_interval; -+ u8 ps_options; -+ u8 ps_hangover_period; -+ u32 ps_enhanced_transition_time; -+ u32 ps_beacon_rx_time; -+ -+ /*** PHY settings ***/ -+ u8 fallback_threshold; -+ u8 stepup_threshold; -+ u16 rate_basic; -+ u16 rate_oper; -+ u16 rate_bcast; -+ u16 rate_bcast100; -+ u8 rate_auto; /* false if "iwconfig rate N" (WITHOUT 'auto'!) */ -+ u8 preamble_mode; /* 0 == Long Preamble, 1 == Short, 2 == Auto */ -+ u8 preamble_cur; -+ -+ u8 tx_disabled; -+ u8 tx_level_dbm; -+ /* u8 tx_level_val; */ -+ /* u8 tx_level_auto; whether to do automatic power adjustment */ -+ -+ unsigned long recalib_time_last_success; -+ unsigned long recalib_time_last_attempt; -+ int recalib_failure_count; -+ int recalib_msg_ratelimit; -+ int retry_errors_msg_ratelimit; -+ -+ unsigned long brange_time_last_state_change; /* time the power LED was last changed */ -+ u8 brange_last_state; /* last state of the LED */ -+ u8 brange_max_quality; /* maximum quality that equates to full speed */ -+ -+ u8 sensitivity; -+ u8 antenna; /* antenna settings */ -+ u8 ed_threshold; /* energy detect threshold */ -+ u8 cca; /* clear channel assessment */ -+ -+ u16 rts_threshold; -+ u16 frag_threshold; -+ u32 short_retry; -+ u32 long_retry; -+ u16 msdu_lifetime; -+ u16 listen_interval; /* given in units of beacon interval */ -+ u32 beacon_interval; -+ -+ u16 capabilities; -+ u8 rate_supported_len; -+ u8 rate_supported[13]; -+ -+ /*** Encryption settings (WEP) ***/ -+ u32 auth_alg; /* used in transmit_authen1 */ -+ u8 wep_enabled; -+ u8 wep_restricted; -+ u8 wep_current_index; -+ wep_key_t wep_keys[DOT11_MAX_DEFAULT_WEP_KEYS]; /* the default WEP keys */ -+ key_struct_t wep_key_struct[10]; -+ -+ /*** Unknown ***/ -+ u8 dtim_interval; -+ -+#ifdef ACX_MEM -+ u32 acx_txbuf_start; -+ int acx_txbuf_numblocks; -+ u32 acx_txbuf_free; /* addr of head of free list */ -+ int acx_txbuf_blocks_free; /* how many are still open */ -+ queueindicator_t *acx_queue_indicator; -+#endif -+ -+ /*** Card Rx/Tx management ***/ -+ u16 rx_config_1; -+ u16 rx_config_2; -+ u16 memblocksize; -+ unsigned int tx_free; -+ unsigned int tx_head; /* keep as close as possible to Tx stuff below (cache line) */ -+ u16 phy_header_len; -+ -+/************************************************************************* -+ *** PCI/USB/... must be last or else hw agnostic code breaks horribly *** -+ *************************************************************************/ -+ -+ /* hack to let common code compile. FIXME */ -+ dma_addr_t rxhostdesc_startphy; -+ -+ /*** PCI stuff ***/ -+#if defined(ACX_PCI) || defined(ACX_MEM) -+ /* pointers to tx buffers, tx host descriptors (in host memory) -+ ** and tx descs in device memory */ -+ unsigned int tx_tail; -+ u8 *txbuf_start; -+ txhostdesc_t *txhostdesc_start; -+ txdesc_t *txdesc_start; /* points to PCI-mapped memory */ -+ dma_addr_t txbuf_startphy; -+ dma_addr_t txhostdesc_startphy; -+ /* sizes of above host memory areas */ -+ unsigned int txbuf_area_size; -+ unsigned int txhostdesc_area_size; -+ -+ unsigned int txdesc_size; /* size of txdesc; ACX111 = ACX100 + 4 */ -+ client_t *txc[TX_CNT]; -+ u16 txr[TX_CNT]; -+ -+ /* same for rx */ -+ unsigned int rx_tail; -+ rxbuffer_t *rxbuf_start; -+ rxhostdesc_t *rxhostdesc_start; -+ rxdesc_t *rxdesc_start; -+ /* physical addresses of above host memory areas */ -+ dma_addr_t rxbuf_startphy; -+ /* dma_addr_t rxhostdesc_startphy; */ -+ unsigned int rxbuf_area_size; -+ unsigned int rxhostdesc_area_size; -+ -+ u8 need_radio_fw; -+ u8 irqs_active; /* whether irq sending is activated */ -+ -+ const u16 *io; /* points to ACX100 or ACX111 PCI I/O register address set */ -+ -+#ifdef ACX_PCI -+ struct pci_dev *pdev; -+#endif -+#ifdef ACX_MEM -+ struct device *dev; -+#endif -+ -+#ifdef ACX_PCI -+ unsigned long membase; -+#endif -+#ifdef ACX_MEM -+ volatile u32 *membase; -+#endif -+ unsigned long membase2; -+#ifdef ACX_PCI -+ void __iomem *iobase; -+#endif -+#ifdef ACX_MEM -+ volatile u32 *iobase; -+#endif -+ void __iomem *iobase2; -+ /* command interface */ -+ u8 __iomem *cmd_area; -+ u8 __iomem *info_area; -+ -+ u16 irq_mask; /* interrupt types to mask out (not wanted) with many IRQs activated */ -+ u16 irq_mask_off; /* interrupt types to mask out (not wanted) with IRQs off */ -+ unsigned int irq_loops_this_jiffy; -+ unsigned long irq_last_jiffies; -+#endif -+ -+ /*** USB stuff ***/ -+#ifdef ACX_USB -+ struct usb_device *usbdev; -+ -+ rxbuffer_t rxtruncbuf; -+ -+ usb_tx_t *usb_tx; -+ usb_rx_t *usb_rx; -+ -+ int bulkinep; /* bulk-in endpoint */ -+ int bulkoutep; /* bulk-out endpoint */ -+ int rxtruncsize; -+#endif -+ -+}; -+ -+static inline acx_device_t* -+ndev2adev(struct net_device *ndev) -+{ -+ return netdev_priv(ndev); -+} -+ -+ -+/* For use with ACX1xx_IE_RXCONFIG */ -+/* bit description -+ * 13 include additional header (length etc.) *required* -+ * struct is defined in 'struct rxbuffer' -+ * is this bit acx100 only? does acx111 always put the header, -+ * and bit setting is irrelevant? --vda -+ * 10 receive frames only with SSID used in last join cmd -+ * 9 discard broadcast -+ * 8 receive packets for multicast address 1 -+ * 7 receive packets for multicast address 0 -+ * 6 discard all multicast packets -+ * 5 discard frames from foreign BSSID -+ * 4 discard frames with foreign destination MAC address -+ * 3 promiscuous mode (receive ALL frames, disable filter) -+ * 2 include FCS -+ * 1 include phy header -+ * 0 ??? -+ */ -+#define RX_CFG1_INCLUDE_RXBUF_HDR 0x2000 /* ACX100 only */ -+#define RX_CFG1_FILTER_SSID 0x0400 -+#define RX_CFG1_FILTER_BCAST 0x0200 -+#define RX_CFG1_RCV_MC_ADDR1 0x0100 -+#define RX_CFG1_RCV_MC_ADDR0 0x0080 -+#define RX_CFG1_FILTER_ALL_MULTI 0x0040 -+#define RX_CFG1_FILTER_BSSID 0x0020 -+#define RX_CFG1_FILTER_MAC 0x0010 -+#define RX_CFG1_RCV_PROMISCUOUS 0x0008 -+#define RX_CFG1_INCLUDE_FCS 0x0004 -+#define RX_CFG1_INCLUDE_PHY_HDR (WANT_PHY_HDR ? 0x0002 : 0) -+/* bit description -+ * 11 receive association requests etc. -+ * 10 receive authentication frames -+ * 9 receive beacon frames -+ * 8 receive contention free packets -+ * 7 receive control frames -+ * 6 receive data frames -+ * 5 receive broken frames -+ * 4 receive management frames -+ * 3 receive probe requests -+ * 2 receive probe responses -+ * 1 receive RTS/CTS/ACK frames -+ * 0 receive other -+ */ -+#define RX_CFG2_RCV_ASSOC_REQ 0x0800 -+#define RX_CFG2_RCV_AUTH_FRAMES 0x0400 -+#define RX_CFG2_RCV_BEACON_FRAMES 0x0200 -+#define RX_CFG2_RCV_CONTENTION_FREE 0x0100 -+#define RX_CFG2_RCV_CTRL_FRAMES 0x0080 -+#define RX_CFG2_RCV_DATA_FRAMES 0x0040 -+#define RX_CFG2_RCV_BROKEN_FRAMES 0x0020 -+#define RX_CFG2_RCV_MGMT_FRAMES 0x0010 -+#define RX_CFG2_RCV_PROBE_REQ 0x0008 -+#define RX_CFG2_RCV_PROBE_RESP 0x0004 -+#define RX_CFG2_RCV_ACK_FRAMES 0x0002 -+#define RX_CFG2_RCV_OTHER 0x0001 -+ -+/* For use with ACX1xx_IE_FEATURE_CONFIG */ -+#define FEATURE1_80MHZ_CLOCK 0x00000040L -+#define FEATURE1_4X 0x00000020L -+#define FEATURE1_LOW_RX 0x00000008L -+#define FEATURE1_EXTRA_LOW_RX 0x00000001L -+ -+#define FEATURE2_SNIFFER 0x00000080L -+#define FEATURE2_NO_TXCRYPT 0x00000001L -+ -+/*-- get and set mask values --*/ -+#define GETSET_LED_POWER 0x00000001L -+#define GETSET_STATION_ID 0x00000002L -+#define SET_TEMPLATES 0x00000004L -+#define SET_STA_LIST 0x00000008L -+#define GETSET_TX 0x00000010L -+#define GETSET_RX 0x00000020L -+#define SET_RXCONFIG 0x00000040L -+#define GETSET_ANTENNA 0x00000080L -+#define GETSET_SENSITIVITY 0x00000100L -+#define GETSET_TXPOWER 0x00000200L -+#define GETSET_ED_THRESH 0x00000400L -+#define GETSET_CCA 0x00000800L -+#define GETSET_POWER_80211 0x00001000L -+#define GETSET_RETRY 0x00002000L -+#define GETSET_REG_DOMAIN 0x00004000L -+#define GETSET_CHANNEL 0x00008000L -+/* Used when ESSID changes etc and we need to scan for AP anew */ -+#define GETSET_RESCAN 0x00010000L -+#define GETSET_MODE 0x00020000L -+#define GETSET_WEP 0x00040000L -+#define SET_WEP_OPTIONS 0x00080000L -+#define SET_MSDU_LIFETIME 0x00100000L -+#define SET_RATE_FALLBACK 0x00200000L -+ -+/* keep in sync with the above */ -+#define GETSET_ALL (0 \ -+/* GETSET_LED_POWER */ | 0x00000001L \ -+/* GETSET_STATION_ID */ | 0x00000002L \ -+/* SET_TEMPLATES */ | 0x00000004L \ -+/* SET_STA_LIST */ | 0x00000008L \ -+/* GETSET_TX */ | 0x00000010L \ -+/* GETSET_RX */ | 0x00000020L \ -+/* SET_RXCONFIG */ | 0x00000040L \ -+/* GETSET_ANTENNA */ | 0x00000080L \ -+/* GETSET_SENSITIVITY */| 0x00000100L \ -+/* GETSET_TXPOWER */ | 0x00000200L \ -+/* GETSET_ED_THRESH */ | 0x00000400L \ -+/* GETSET_CCA */ | 0x00000800L \ -+/* GETSET_POWER_80211 */| 0x00001000L \ -+/* GETSET_RETRY */ | 0x00002000L \ -+/* GETSET_REG_DOMAIN */ | 0x00004000L \ -+/* GETSET_CHANNEL */ | 0x00008000L \ -+/* GETSET_RESCAN */ | 0x00010000L \ -+/* GETSET_MODE */ | 0x00020000L \ -+/* GETSET_WEP */ | 0x00040000L \ -+/* SET_WEP_OPTIONS */ | 0x00080000L \ -+/* SET_MSDU_LIFETIME */ | 0x00100000L \ -+/* SET_RATE_FALLBACK */ | 0x00200000L \ -+ ) -+ -+ -+/*********************************************************************** -+** Firmware loading -+*/ -+#include /* request_firmware() */ -+#include /* struct pci_device */ -+ -+ -+/*********************************************************************** -+*/ -+typedef struct acx100_ie_memblocksize { -+ u16 type; -+ u16 len; -+ u16 size; -+} ACX_PACKED acx100_ie_memblocksize_t; -+ -+typedef struct acx100_ie_queueconfig { -+ u16 type; -+ u16 len; -+ u32 AreaSize; -+ u32 RxQueueStart; -+ u8 QueueOptions; -+ u8 NumTxQueues; -+ u8 NumRxDesc; /* for USB only */ -+ u8 pad1; -+ u32 QueueEnd; -+ u32 HostQueueEnd; /* QueueEnd2 */ -+ u32 TxQueueStart; -+ u8 TxQueuePri; -+ u8 NumTxDesc; -+ u16 pad2; -+} ACX_PACKED acx100_ie_queueconfig_t; -+ -+typedef struct acx111_ie_queueconfig { -+ u16 type; -+ u16 len; -+ u32 tx_memory_block_address; -+ u32 rx_memory_block_address; -+ u32 rx1_queue_address; -+ u32 reserved1; -+ u32 tx1_queue_address; -+ u8 tx1_attributes; -+ u16 reserved2; -+ u8 reserved3; -+} ACX_PACKED acx111_ie_queueconfig_t; -+ -+typedef struct acx100_ie_memconfigoption { -+ u16 type; -+ u16 len; -+ u32 DMA_config; -+ acx_ptr pRxHostDesc; -+ u32 rx_mem; -+ u32 tx_mem; -+ u16 RxBlockNum; -+ u16 TxBlockNum; -+} ACX_PACKED acx100_ie_memconfigoption_t; -+ -+typedef struct acx111_ie_memoryconfig { -+ u16 type; -+ u16 len; -+ u16 no_of_stations; -+ u16 memory_block_size; -+ u8 tx_rx_memory_block_allocation; -+ u8 count_rx_queues; -+ u8 count_tx_queues; -+ u8 options; -+ u8 fragmentation; -+ u16 reserved1; -+ u8 reserved2; -+ -+ /* start of rx1 block */ -+ u8 rx_queue1_count_descs; -+ u8 rx_queue1_reserved1; -+ u8 rx_queue1_type; /* must be set to 7 */ -+ u8 rx_queue1_prio; /* must be set to 0 */ -+ acx_ptr rx_queue1_host_rx_start; -+ /* end of rx1 block */ -+ -+ /* start of tx1 block */ -+ u8 tx_queue1_count_descs; -+ u8 tx_queue1_reserved1; -+ u8 tx_queue1_reserved2; -+ u8 tx_queue1_attributes; -+ /* end of tx1 block */ -+} ACX_PACKED acx111_ie_memoryconfig_t; -+ -+typedef struct acx_ie_memmap { -+ u16 type; -+ u16 len; -+ u32 CodeStart; -+ u32 CodeEnd; -+ u32 WEPCacheStart; -+ u32 WEPCacheEnd; -+ u32 PacketTemplateStart; -+ u32 PacketTemplateEnd; -+ u32 QueueStart; -+ u32 QueueEnd; -+ u32 PoolStart; -+ u32 PoolEnd; -+} ACX_PACKED acx_ie_memmap_t; -+ -+typedef struct acx111_ie_feature_config { -+ u16 type; -+ u16 len; -+ u32 feature_options; -+ u32 data_flow_options; -+} ACX_PACKED acx111_ie_feature_config_t; -+ -+typedef struct acx111_ie_tx_level { -+ u16 type; -+ u16 len; -+ u8 level; -+} ACX_PACKED acx111_ie_tx_level_t; -+ -+#define PS_CFG_ENABLE 0x80 -+#define PS_CFG_PENDING 0x40 /* status flag when entering PS */ -+#define PS_CFG_WAKEUP_MODE_MASK 0x07 -+#define PS_CFG_WAKEUP_BY_HOST 0x03 -+#define PS_CFG_WAKEUP_EACH_ITVL 0x02 -+#define PS_CFG_WAKEUP_ON_DTIM 0x01 -+#define PS_CFG_WAKEUP_ALL_BEAC 0x00 -+ -+/* Enhanced PS mode: sleep until Rx Beacon w/ the STA's AID bit set -+** in the TIM; newer firmwares only(?) */ -+#define PS_OPT_ENA_ENHANCED_PS 0x04 -+#define PS_OPT_TX_PSPOLL 0x02 /* send PSPoll frame to fetch waiting frames from AP (on frame with matching AID) */ -+#define PS_OPT_STILL_RCV_BCASTS 0x01 -+ -+typedef struct acx100_ie_powersave { -+ u16 type; -+ u16 len; -+ u8 wakeup_cfg; -+ u8 listen_interval; /* for EACH_ITVL: wake up every "beacon units" interval */ -+ u8 options; -+ u8 hangover_period; /* remaining wake time after Tx MPDU w/ PS bit, in values of 1/1024 seconds */ -+ u16 enhanced_ps_transition_time; /* rem. wake time for Enh. PS */ -+} ACX_PACKED acx100_ie_powersave_t; -+ -+typedef struct acx111_ie_powersave { -+ u16 type; -+ u16 len; -+ u8 wakeup_cfg; -+ u8 listen_interval; /* for EACH_ITVL: wake up every "beacon units" interval */ -+ u8 options; -+ u8 hangover_period; /* remaining wake time after Tx MPDU w/ PS bit, in values of 1/1024 seconds */ -+ u32 beacon_rx_time; -+ u32 enhanced_ps_transition_time; /* rem. wake time for Enh. PS */ -+} ACX_PACKED acx111_ie_powersave_t; -+ -+ -+/*********************************************************************** -+** Commands and template structures -+*/ -+ -+/* -+** SCAN command structure -+** -+** even though acx100 scan rates match RATE100 constants, -+** acx111 ones do not match! Therefore we do not use RATE100 #defines */ -+#define ACX_SCAN_RATE_1 10 -+#define ACX_SCAN_RATE_2 20 -+#define ACX_SCAN_RATE_5 55 -+#define ACX_SCAN_RATE_11 110 -+#define ACX_SCAN_RATE_22 220 -+#define ACX_SCAN_RATE_PBCC 0x80 /* OR with this if needed */ -+#define ACX_SCAN_OPT_ACTIVE 0x00 /* a bit mask */ -+#define ACX_SCAN_OPT_PASSIVE 0x01 -+/* Background scan: we go into Power Save mode (by transmitting -+** NULL data frame to AP with the power mgmt bit set), do the scan, -+** and then exit Power Save mode. A plus is that AP buffers frames -+** for us while we do background scan. Thus we avoid frame losses. -+** Background scan can be active or passive, just like normal one */ -+#define ACX_SCAN_OPT_BACKGROUND 0x02 -+typedef struct acx100_scan { -+ u16 count; /* number of scans to do, 0xffff == continuous */ -+ u16 start_chan; -+ u16 flags; /* channel list mask; 0x8000 == all channels? */ -+ u8 max_rate; /* max. probe rate */ -+ u8 options; /* bit mask, see defines above */ -+ u16 chan_duration; -+ u16 max_probe_delay; -+} ACX_PACKED acx100_scan_t; /* length 0xc */ -+ -+#define ACX111_SCAN_RATE_6 0x0B -+#define ACX111_SCAN_RATE_9 0x0F -+#define ACX111_SCAN_RATE_12 0x0A -+#define ACX111_SCAN_RATE_18 0x0E -+#define ACX111_SCAN_RATE_24 0x09 -+#define ACX111_SCAN_RATE_36 0x0D -+#define ACX111_SCAN_RATE_48 0x08 -+#define ACX111_SCAN_RATE_54 0x0C -+#define ACX111_SCAN_OPT_5GHZ 0x04 /* else 2.4GHZ */ -+#define ACX111_SCAN_MOD_SHORTPRE 0x01 /* you can combine SHORTPRE and PBCC */ -+#define ACX111_SCAN_MOD_PBCC 0x80 -+#define ACX111_SCAN_MOD_OFDM 0x40 -+typedef struct acx111_scan { -+ u16 count; /* number of scans to do */ -+ u8 channel_list_select; /* 0: scan all channels, 1: from chan_list only */ -+ u16 reserved1; -+ u8 reserved2; -+ u8 rate; /* rate for probe requests (if active scan) */ -+ u8 options; /* bit mask, see defines above */ -+ u16 chan_duration; /* min time to wait for reply on one channel (in TU) */ -+ /* (active scan only) (802.11 section 11.1.3.2.2) */ -+ u16 max_probe_delay; /* max time to wait for reply on one channel (active scan) */ -+ /* time to listen on a channel (passive scan) */ -+ u8 modulation; -+ u8 channel_list[26]; /* bits 7:0 first byte: channels 8:1 */ -+ /* bits 7:0 second byte: channels 16:9 */ -+ /* 26 bytes is enough to cover 802.11a */ -+} ACX_PACKED acx111_scan_t; -+ -+ -+/* -+** Radio calibration command structure -+*/ -+typedef struct acx111_cmd_radiocalib { -+/* 0x80000000 == automatic calibration by firmware, according to interval; -+ * bits 0..3: select calibration methods to go through: -+ * calib based on DC, AfeDC, Tx mismatch, Tx equilization */ -+ u32 methods; -+ u32 interval; -+} ACX_PACKED acx111_cmd_radiocalib_t; -+ -+ -+/* -+** Packet template structures -+** -+** Packet templates store contents of Beacon, Probe response, Probe request, -+** Null data frame, and TIM data frame. Firmware automatically transmits -+** contents of template at appropriate time: -+** - Beacon: when configured as AP or Ad-hoc -+** - Probe response: when configured as AP or Ad-hoc, whenever -+** a Probe request frame is received -+** - Probe request: when host issues SCAN command (active) -+** - Null data frame: when entering 802.11 power save mode -+** - TIM data: at the end of Beacon frames (if no TIM template -+** is configured, then transmits default TIM) -+** NB: -+** - size field must be set to size of actual template -+** (NOT sizeof(struct) - templates are variable in length), -+** size field is not itself counted. -+** - members flagged with an asterisk must be initialized with host, -+** rest must be zero filled. -+** - variable length fields shown only in comments */ -+typedef struct acx_template_tim { -+ u16 size; -+ u8 tim_eid; /* 00 1 TIM IE ID * */ -+ u8 len; /* 01 1 Length * */ -+ u8 dtim_cnt; /* 02 1 DTIM Count */ -+ u8 dtim_period; /* 03 1 DTIM Period */ -+ u8 bitmap_ctrl; /* 04 1 Bitmap Control * (except bit0) */ -+ /* 05 n Partial Virtual Bitmap * */ -+ u8 variable[0x100 - 1-1-1-1-1]; -+} ACX_PACKED acx_template_tim_t; -+ -+typedef struct acx_template_probereq { -+ u16 size; -+ u16 fc; /* 00 2 fc * */ -+ u16 dur; /* 02 2 Duration */ -+ u8 da[6]; /* 04 6 Destination Address * */ -+ u8 sa[6]; /* 0A 6 Source Address * */ -+ u8 bssid[6]; /* 10 6 BSSID * */ -+ u16 seq; /* 16 2 Sequence Control */ -+ /* 18 n SSID * */ -+ /* nn n Supported Rates * */ -+ u8 variable[0x44 - 2-2-6-6-6-2]; -+} ACX_PACKED acx_template_probereq_t; -+ -+typedef struct acx_template_proberesp { -+ u16 size; -+ u16 fc; /* 00 2 fc * (bits [15:12] and [10:8] per 802.11 section 7.1.3.1) */ -+ u16 dur; /* 02 2 Duration */ -+ u8 da[6]; /* 04 6 Destination Address */ -+ u8 sa[6]; /* 0A 6 Source Address */ -+ u8 bssid[6]; /* 10 6 BSSID */ -+ u16 seq; /* 16 2 Sequence Control */ -+ u8 timestamp[8];/* 18 8 Timestamp */ -+ u16 beacon_interval; /* 20 2 Beacon Interval * */ -+ u16 cap; /* 22 2 Capability Information * */ -+ /* 24 n SSID * */ -+ /* nn n Supported Rates * */ -+ /* nn 1 DS Parameter Set * */ -+ u8 variable[0x54 - 2-2-6-6-6-2-8-2-2]; -+} ACX_PACKED acx_template_proberesp_t; -+#define acx_template_beacon_t acx_template_proberesp_t -+#define acx_template_beacon acx_template_proberesp -+ -+typedef struct acx_template_nullframe { -+ u16 size; -+ struct wlan_hdr_a3 hdr; -+} ACX_PACKED acx_template_nullframe_t; -+ -+ -+/* -+** JOIN command structure -+** -+** as opposed to acx100, acx111 dtim interval is AFTER rates_basic111. -+** NOTE: took me about an hour to get !@#$%^& packing right --> struct packing is eeeeevil... */ -+typedef struct acx_joinbss { -+ u8 bssid[ETH_ALEN]; -+ u16 beacon_interval; -+ union { -+ struct { -+ u8 dtim_interval; -+ u8 rates_basic; -+ u8 rates_supported; -+ /* -+ * ARM compiler doesn't pack correctly unless unions -+ * inside structures are multiples of 4 bytes. Ugh. -+ */ -+ u8 genfrm_txrate; /* generated frame (bcn, proberesp, RTS, PSpoll) tx rate */ -+ } ACX_PACKED acx100; -+ struct { -+ u16 rates_basic; -+ u8 dtim_interval; -+ u8 genfrm_txrate; /* generated frame (bcn, proberesp, RTS, PSpoll) tx rate */ -+ } ACX_PACKED acx111; -+ /* -+ * ARM compiler doesn't pack correctly unles unions are aligned on -+ * 4 byte boundaries and are multiples of 4 bytes. -+ */ -+ struct { -+ u8 d1; -+ u8 d2; -+ u8 d3; -+ u8 genfrm_txrate; -+ } ACX_PACKED txrate; -+ } ACX_PACKED u; -+ u8 genfrm_mod_pre; /* generated frame modulation/preamble: -+ ** bit7: PBCC, bit6: OFDM (else CCK/DQPSK/DBPSK) -+ ** bit5: short pre */ -+ u8 macmode; /* BSS Type, must be one of ACX_MODE_xxx */ -+ u8 channel; -+ u8 essid_len; -+ char essid[IW_ESSID_MAX_SIZE]; -+} ACX_PACKED acx_joinbss_t; -+ -+#define JOINBSS_RATES_1 0x01 -+#define JOINBSS_RATES_2 0x02 -+#define JOINBSS_RATES_5 0x04 -+#define JOINBSS_RATES_11 0x08 -+#define JOINBSS_RATES_22 0x10 -+ -+/* Looks like missing bits are used to indicate 11g rates! -+** (it follows from the fact that constants below match 1:1 to RATE111_nn) -+** This was actually seen! Look at that Assoc Request sent by acx111, -+** it _does_ contain 11g rates in basic set: -+01:30:20.070772 Beacon (xxx) [1.0* 2.0* 5.5* 11.0* 6.0* 9.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ESS CH: 1 -+01:30:20.074425 Authentication (Open System)-1: Succesful -+01:30:20.076539 Authentication (Open System)-2: -+01:30:20.076620 Acknowledgment -+01:30:20.088546 Assoc Request (xxx) [1.0* 2.0* 5.5* 6.0* 9.0* 11.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] -+01:30:20.122413 Assoc Response AID(1) :: Succesful -+01:30:20.122679 Acknowledgment -+01:30:20.173204 Beacon (xxx) [1.0* 2.0* 5.5* 11.0* 6.0* 9.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ESS CH: 1 -+*/ -+#define JOINBSS_RATES_BASIC111_1 0x0001 -+#define JOINBSS_RATES_BASIC111_2 0x0002 -+#define JOINBSS_RATES_BASIC111_5 0x0004 -+#define JOINBSS_RATES_BASIC111_11 0x0020 -+#define JOINBSS_RATES_BASIC111_22 0x0100 -+ -+ -+/*********************************************************************** -+*/ -+typedef struct mem_read_write { -+ u16 addr; -+ u16 type; /* 0x0 int. RAM / 0xffff MAC reg. / 0x81 PHY RAM / 0x82 PHY reg.; or maybe it's actually 0x30 for MAC? Better verify it by writing and reading back and checking whether the value holds! */ -+ u32 len; -+ u32 data; -+} ACX_PACKED mem_read_write_t; -+ -+typedef struct firmware_image { -+ u32 chksum; -+ u32 size; -+ u8 data[1]; /* the byte array of the actual firmware... */ -+} ACX_PACKED firmware_image_t; -+ -+typedef struct acx_cmd_radioinit { -+ u32 offset; -+ u32 len; -+} ACX_PACKED acx_cmd_radioinit_t; -+ -+typedef struct acx100_ie_wep_options { -+ u16 type; -+ u16 len; -+ u16 NumKeys; /* max # of keys */ -+ u8 WEPOption; /* 0 == decrypt default key only, 1 == override decrypt */ -+ u8 Pad; /* used only for acx111 */ -+} ACX_PACKED acx100_ie_wep_options_t; -+ -+typedef struct ie_dot11WEPDefaultKey { -+ u16 type; -+ u16 len; -+ u8 action; -+ u8 keySize; -+ u8 defaultKeyNum; -+ u8 key[29]; /* check this! was Key[19] */ -+} ACX_PACKED ie_dot11WEPDefaultKey_t; -+ -+typedef struct acx111WEPDefaultKey { -+ u8 MacAddr[ETH_ALEN]; -+ u16 action; /* NOTE: this is a u16, NOT a u8!! */ -+ u16 reserved; -+ u8 keySize; -+ u8 type; -+ u8 index; -+ u8 defaultKeyNum; -+ u8 counter[6]; -+ u8 key[32]; /* up to 32 bytes (for TKIP!) */ -+} ACX_PACKED acx111WEPDefaultKey_t; -+ -+typedef struct ie_dot11WEPDefaultKeyID { -+ u16 type; -+ u16 len; -+ u8 KeyID; -+} ACX_PACKED ie_dot11WEPDefaultKeyID_t; -+ -+typedef struct acx100_cmd_wep_mgmt { -+ u8 MacAddr[ETH_ALEN]; -+ u16 Action; -+ u16 KeySize; -+ u8 Key[29]; /* 29*8 == 232bits == WEP256 */ -+} ACX_PACKED acx100_cmd_wep_mgmt_t; -+ -+typedef struct acx_ie_generic { -+ u16 type; -+ u16 len; -+ union { -+ /* Association ID IE: just a 16bit value: */ -+ u16 aid; -+ /* generic member for quick implementation of commands */ -+ u8 bytes[32]; -+ } ACX_PACKED m; -+} ACX_PACKED acx_ie_generic_t; -+ -+/*********************************************************************** -+*/ -+#define CHECK_SIZEOF(type,size) { \ -+ extern void BUG_bad_size_for_##type(void); \ -+ if (sizeof(type)!=(size)) BUG_bad_size_for_##type(); \ -+} -+ -+static inline void -+acx_struct_size_check(void) -+{ -+ CHECK_SIZEOF(txdesc_t, 0x30); -+ CHECK_SIZEOF(acx100_ie_memconfigoption_t, 24); -+ CHECK_SIZEOF(acx100_ie_queueconfig_t, 0x20); -+ CHECK_SIZEOF(acx_joinbss_t, 0x30); -+ /* IEs need 4 bytes for (type,len) tuple */ -+ CHECK_SIZEOF(acx111_ie_configoption_t, ACX111_IE_CONFIG_OPTIONS_LEN + 4); -+} -+ -+ -+/*********************************************************************** -+** Global data -+*/ -+extern const u8 acx_bitpos2ratebyte[]; -+extern const u8 acx_bitpos2rate100[]; -+ -+extern const u8 acx_reg_domain_ids[]; -+extern const char * const acx_reg_domain_strings[]; -+enum { -+ acx_reg_domain_ids_len = 8 -+}; -+ -+extern const struct iw_handler_def acx_ioctl_handler_def; -Index: linux-2.6.23/drivers/net/wireless/acx/common.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/common.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,7388 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx_hw.h" -+#include "acx.h" -+ -+ -+/*********************************************************************** -+*/ -+static client_t *acx_l_sta_list_alloc(acx_device_t *adev); -+static client_t *acx_l_sta_list_get_from_hash(acx_device_t *adev, const u8 *address); -+ -+static int acx_l_process_data_frame_master(acx_device_t *adev, rxbuffer_t *rxbuf); -+static int acx_l_process_data_frame_client(acx_device_t *adev, rxbuffer_t *rxbuf); -+/* static int acx_l_process_NULL_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala); */ -+static int acx_l_process_mgmt_frame(acx_device_t *adev, rxbuffer_t *rxbuf); -+static void acx_l_process_disassoc_from_sta(acx_device_t *adev, const wlan_fr_disassoc_t *req); -+static void acx_l_process_disassoc_from_ap(acx_device_t *adev, const wlan_fr_disassoc_t *req); -+static void acx_l_process_deauth_from_sta(acx_device_t *adev, const wlan_fr_deauthen_t *req); -+static void acx_l_process_deauth_from_ap(acx_device_t *adev, const wlan_fr_deauthen_t *req); -+static int acx_l_process_probe_response(acx_device_t *adev, wlan_fr_proberesp_t *req, const rxbuffer_t *rxbuf); -+static int acx_l_process_assocresp(acx_device_t *adev, const wlan_fr_assocresp_t *req); -+static int acx_l_process_reassocresp(acx_device_t *adev, const wlan_fr_reassocresp_t *req); -+static int acx_l_process_authen(acx_device_t *adev, const wlan_fr_authen_t *req); -+static int acx_l_transmit_assocresp(acx_device_t *adev, const wlan_fr_assocreq_t *req); -+static int acx_l_transmit_reassocresp(acx_device_t *adev, const wlan_fr_reassocreq_t *req); -+static int acx_l_transmit_deauthen(acx_device_t *adev, const u8 *addr, u16 reason); -+static int acx_l_transmit_authen1(acx_device_t *adev); -+static int acx_l_transmit_authen2(acx_device_t *adev, const wlan_fr_authen_t *req, client_t *clt); -+static int acx_l_transmit_authen3(acx_device_t *adev, const wlan_fr_authen_t *req); -+static int acx_l_transmit_authen4(acx_device_t *adev, const wlan_fr_authen_t *req); -+static int acx_l_transmit_assoc_req(acx_device_t *adev); -+ -+ -+/*********************************************************************** -+*/ -+#if ACX_DEBUG -+unsigned int acx_debug /* will add __read_mostly later */ = ACX_DEFAULT_MSG; -+/* parameter is 'debug', corresponding var is acx_debug */ -+module_param_named(debug, acx_debug, uint, 0); -+MODULE_PARM_DESC(debug, "Debug level mask (see L_xxx constants)"); -+#endif -+ -+#ifdef MODULE_LICENSE -+MODULE_LICENSE("Dual MPL/GPL"); -+#endif -+/* USB had this: MODULE_AUTHOR("Martin Wawro "); */ -+MODULE_AUTHOR("ACX100 Open Source Driver development team"); -+MODULE_DESCRIPTION("Driver for TI ACX1xx based wireless cards (CardBus/PCI/USB)"); -+ -+ -+/*********************************************************************** -+*/ -+/* Probably a number of acx's intermediate buffers for USB transfers, -+** not to be confused with number of descriptors in tx/rx rings -+** (which are not directly accessible to host in USB devices) */ -+#define USB_RX_CNT 10 -+#define USB_TX_CNT 10 -+ -+ -+/*********************************************************************** -+*/ -+ -+/* minutes to wait until next radio recalibration: */ -+#define RECALIB_PAUSE 5 -+ -+/* Please keep acx_reg_domain_ids_len in sync... */ -+const u8 acx_reg_domain_ids[acx_reg_domain_ids_len] = -+ { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40, 0x41, 0x51 }; -+static const u16 reg_domain_channel_masks[acx_reg_domain_ids_len] = -+#ifdef ACX_ALLOW_ALLCHANNELS -+ { 0x3fff, 0x07ff, 0x1fff, 0x0600, 0x1e00, 0x2000, 0x3fff, 0x01fc }; -+#else -+ { 0x07ff, 0x07ff, 0x1fff, 0x0600, 0x1e00, 0x2000, 0x3fff, 0x01fc }; -+#endif -+const char * const -+acx_reg_domain_strings[] = { -+ /* 0 */ " 1-11 FCC (USA)", -+ /* 1 */ " 1-11 DOC/IC (Canada)", -+/* BTW: WLAN use in ETSI is regulated by ETSI standard EN 300 328-2 V1.1.2 */ -+ /* 2 */ " 1-13 ETSI (Europe)", -+ /* 3 */ "10-11 Spain", -+ /* 4 */ "10-13 France", -+ /* 5 */ " 14 MKK (Japan)", -+ /* 6 */ " 1-14 MKK1", -+ /* 7 */ " 3-9 Israel (not all firmware versions)", -+ NULL /* needs to remain as last entry */ -+}; -+ -+ -+ -+/*********************************************************************** -+** Debugging support -+*/ -+#ifdef PARANOID_LOCKING -+static unsigned max_lock_time; -+static unsigned max_sem_time; -+ -+void -+acx_lock_unhold() { max_lock_time = 0; } -+void -+acx_sem_unhold() { max_sem_time = 0; } -+ -+static inline const char* -+sanitize_str(const char *s) -+{ -+ const char* t = strrchr(s, '/'); -+ if (t) return t + 1; -+ return s; -+} -+ -+void -+acx_lock_debug(acx_device_t *adev, const char* where) -+{ -+ unsigned int count = 100*1000*1000; -+ where = sanitize_str(where); -+ while (--count) { -+ if (!spin_is_locked(&adev->lock)) break; -+ cpu_relax(); -+ } -+ if (!count) { -+ printk(KERN_EMERG "LOCKUP: already taken at %s!\n", adev->last_lock); -+ BUG(); -+ } -+ adev->last_lock = where; -+ rdtscl(adev->lock_time); -+} -+void -+acx_unlock_debug(acx_device_t *adev, const char* where) -+{ -+#ifdef SMP -+ if (!spin_is_locked(&adev->lock)) { -+ where = sanitize_str(where); -+ printk(KERN_EMERG "STRAY UNLOCK at %s!\n", where); -+ BUG(); -+ } -+#endif -+ if (acx_debug & L_LOCK) { -+ unsigned long diff; -+ rdtscl(diff); -+ diff -= adev->lock_time; -+ if (diff > max_lock_time) { -+ where = sanitize_str(where); -+ printk("max lock hold time %ld CPU ticks from %s " -+ "to %s\n", diff, adev->last_lock, where); -+ max_lock_time = diff; -+ } -+ } -+} -+void -+acx_down_debug(acx_device_t *adev, const char* where) -+{ -+ int sem_count; -+ unsigned long timeout = jiffies + 5*HZ; -+ -+ where = sanitize_str(where); -+ -+ for (;;) { -+ sem_count = atomic_read(&adev->sem.count); -+ if (sem_count) break; -+ if (time_after(jiffies, timeout)) -+ break; -+ msleep(5); -+ } -+ if (!sem_count) { -+ printk(KERN_EMERG "D STATE at %s! last sem at %s\n", -+ where, adev->last_sem); -+ dump_stack(); -+ } -+ adev->last_sem = where; -+ adev->sem_time = jiffies; -+ down(&adev->sem); -+ if (acx_debug & L_LOCK) { -+ printk("%s: sem_down %d -> %d\n", -+ where, sem_count, atomic_read(&adev->sem.count)); -+ } -+} -+void -+acx_up_debug(acx_device_t *adev, const char* where) -+{ -+ int sem_count = atomic_read(&adev->sem.count); -+ if (sem_count) { -+ where = sanitize_str(where); -+ printk(KERN_EMERG "STRAY UP at %s! sem.count=%d\n", where, sem_count); -+ dump_stack(); -+ } -+ if (acx_debug & L_LOCK) { -+ unsigned long diff = jiffies - adev->sem_time; -+ if (diff > max_sem_time) { -+ where = sanitize_str(where); -+ printk("max sem hold time %ld jiffies from %s " -+ "to %s\n", diff, adev->last_sem, where); -+ max_sem_time = diff; -+ } -+ } -+ up(&adev->sem); -+ if (acx_debug & L_LOCK) { -+ where = sanitize_str(where); -+ printk("%s: sem_up %d -> %d\n", -+ where, sem_count, atomic_read(&adev->sem.count)); -+ } -+} -+#endif /* PARANOID_LOCKING */ -+ -+ -+/*********************************************************************** -+*/ -+#if ACX_DEBUG > 1 -+ -+static int acx_debug_func_indent; -+#define DEBUG_TSC 0 -+#define FUNC_INDENT_INCREMENT 2 -+ -+#if DEBUG_TSC -+#define TIMESTAMP(d) unsigned long d; rdtscl(d) -+#else -+#define TIMESTAMP(d) unsigned long d = jiffies -+#endif -+ -+static const char -+spaces[] = " " " "; /* Nx10 spaces */ -+ -+void -+log_fn_enter(const char *funcname) -+{ -+ int indent; -+ TIMESTAMP(d); -+ -+ indent = acx_debug_func_indent; -+ if (indent >= sizeof(spaces)) -+ indent = sizeof(spaces)-1; -+ -+ printk("%08ld %s==> %s\n", -+ d % 100000000, -+ spaces + (sizeof(spaces)-1) - indent, -+ funcname -+ ); -+ -+ acx_debug_func_indent += FUNC_INDENT_INCREMENT; -+} -+void -+log_fn_exit(const char *funcname) -+{ -+ int indent; -+ TIMESTAMP(d); -+ -+ acx_debug_func_indent -= FUNC_INDENT_INCREMENT; -+ -+ indent = acx_debug_func_indent; -+ if (indent >= sizeof(spaces)) -+ indent = sizeof(spaces)-1; -+ -+ printk("%08ld %s<== %s\n", -+ d % 100000000, -+ spaces + (sizeof(spaces)-1) - indent, -+ funcname -+ ); -+} -+void -+log_fn_exit_v(const char *funcname, int v) -+{ -+ int indent; -+ TIMESTAMP(d); -+ -+ acx_debug_func_indent -= FUNC_INDENT_INCREMENT; -+ -+ indent = acx_debug_func_indent; -+ if (indent >= sizeof(spaces)) -+ indent = sizeof(spaces)-1; -+ -+ printk("%08ld %s<== %s: %08X\n", -+ d % 100000000, -+ spaces + (sizeof(spaces)-1) - indent, -+ funcname, -+ v -+ ); -+} -+#endif /* ACX_DEBUG > 1 */ -+ -+ -+/*********************************************************************** -+** Basically a msleep with logging -+*/ -+void -+acx_s_msleep(int ms) -+{ -+ FN_ENTER; -+ msleep(ms); -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** Not inlined: it's larger than it seems -+*/ -+void -+acx_print_mac(const char *head, const u8 *mac, const char *tail) -+{ -+ printk("%s"MACSTR"%s", head, MAC(mac), tail); -+} -+ -+ -+/*********************************************************************** -+** acx_get_status_name -+*/ -+static const char* -+acx_get_status_name(u16 status) -+{ -+ static const char * const str[] = { -+ "STOPPED", "SCANNING", "WAIT_AUTH", -+ "AUTHENTICATED", "ASSOCIATED", "INVALID??" -+ }; -+ if (status > VEC_SIZE(str)-1) -+ status = VEC_SIZE(str)-1; -+ -+ return str[status]; -+} -+ -+ -+/*********************************************************************** -+** acx_get_packet_type_string -+*/ -+#if ACX_DEBUG -+const char* -+acx_get_packet_type_string(u16 fc) -+{ -+ static const char * const mgmt_arr[] = { -+ "MGMT/AssocReq", "MGMT/AssocResp", "MGMT/ReassocReq", -+ "MGMT/ReassocResp", "MGMT/ProbeReq", "MGMT/ProbeResp", -+ "MGMT/UNKNOWN", "MGMT/UNKNOWN", "MGMT/Beacon", "MGMT/ATIM", -+ "MGMT/Disassoc", "MGMT/Authen", "MGMT/Deauthen" -+ }; -+ static const char * const ctl_arr[] = { -+ "CTL/PSPoll", "CTL/RTS", "CTL/CTS", "CTL/Ack", "CTL/CFEnd", -+ "CTL/CFEndCFAck" -+ }; -+ static const char * const data_arr[] = { -+ "DATA/DataOnly", "DATA/Data CFAck", "DATA/Data CFPoll", -+ "DATA/Data CFAck/CFPoll", "DATA/Null", "DATA/CFAck", -+ "DATA/CFPoll", "DATA/CFAck/CFPoll" -+ }; -+ const char *str; -+ u8 fstype = (WF_FC_FSTYPE & fc) >> 4; -+ u8 ctl; -+ -+ switch (WF_FC_FTYPE & fc) { -+ case WF_FTYPE_MGMT: -+ if (fstype < VEC_SIZE(mgmt_arr)) -+ str = mgmt_arr[fstype]; -+ else -+ str = "MGMT/UNKNOWN"; -+ break; -+ case WF_FTYPE_CTL: -+ ctl = fstype - 0x0a; -+ if (ctl < VEC_SIZE(ctl_arr)) -+ str = ctl_arr[ctl]; -+ else -+ str = "CTL/UNKNOWN"; -+ break; -+ case WF_FTYPE_DATA: -+ if (fstype < VEC_SIZE(data_arr)) -+ str = data_arr[fstype]; -+ else -+ str = "DATA/UNKNOWN"; -+ break; -+ default: -+ str = "UNKNOWN"; -+ break; -+ } -+ return str; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_wlan_reason_str -+*/ -+static inline const char* -+acx_wlan_reason_str(u16 reason) -+{ -+ static const char* const reason_str[] = { -+ /* 0 */ "?", -+ /* 1 */ "unspecified", -+ /* 2 */ "prev auth is not valid", -+ /* 3 */ "leaving BBS", -+ /* 4 */ "due to inactivity", -+ /* 5 */ "AP is busy", -+ /* 6 */ "got class 2 frame from non-auth'ed STA", -+ /* 7 */ "got class 3 frame from non-assoc'ed STA", -+ /* 8 */ "STA has left BSS", -+ /* 9 */ "assoc without auth is not allowed", -+ /* 10 */ "bad power setting (802.11h)", -+ /* 11 */ "bad channel (802.11i)", -+ /* 12 */ "?", -+ /* 13 */ "invalid IE", -+ /* 14 */ "MIC failure", -+ /* 15 */ "four-way handshake timeout", -+ /* 16 */ "group key handshake timeout", -+ /* 17 */ "IE is different", -+ /* 18 */ "invalid group cipher", -+ /* 19 */ "invalid pairwise cipher", -+ /* 20 */ "invalid AKMP", -+ /* 21 */ "unsupported RSN version", -+ /* 22 */ "invalid RSN IE cap", -+ /* 23 */ "802.1x failed", -+ /* 24 */ "cipher suite rejected" -+ }; -+ return reason < VEC_SIZE(reason_str) ? reason_str[reason] : "?"; -+} -+ -+ -+/*********************************************************************** -+** acx_cmd_status_str -+*/ -+const char* -+acx_cmd_status_str(unsigned int state) -+{ -+ static const char * const cmd_error_strings[] = { -+ "Idle", -+ "Success", -+ "Unknown Command", -+ "Invalid Information Element", -+ "Channel rejected", -+ "Channel invalid in current regulatory domain", -+ "MAC invalid", -+ "Command rejected (read-only information element)", -+ "Command rejected", -+ "Already asleep", -+ "TX in progress", -+ "Already awake", -+ "Write only", -+ "RX in progress", -+ "Invalid parameter", -+ "Scan in progress", -+ "Failed" -+ }; -+ return state < VEC_SIZE(cmd_error_strings) ? -+ cmd_error_strings[state] : "?"; -+} -+ -+ -+/*********************************************************************** -+** get_status_string -+*/ -+static inline const char* -+get_status_string(unsigned int status) -+{ -+ /* A bit shortened, but hopefully still understandable */ -+ static const char * const status_str[] = { -+ /* 0 */ "Successful", -+ /* 1 */ "Unspecified failure", -+ /* 2 */ "reserved", -+ /* 3 */ "reserved", -+ /* 4 */ "reserved", -+ /* 5 */ "reserved", -+ /* 6 */ "reserved", -+ /* 7 */ "reserved", -+ /* 8 */ "reserved", -+ /* 9 */ "reserved", -+ /*10 */ "Cannot support all requested capabilities in Capability Information field", -+ /*11 */ "Reassoc denied (reason outside of 802.11b scope)", -+ /*12 */ "Assoc denied (reason outside of 802.11b scope) -- maybe MAC filtering by peer?", -+ /*13 */ "Responding station doesnt support specified auth algorithm -- maybe WEP auth Open vs. Restricted?", -+ /*14 */ "Auth rejected: wrong transaction sequence number", -+ /*15 */ "Auth rejected: challenge failure", -+ /*16 */ "Auth rejected: timeout for next frame in sequence", -+ /*17 */ "Assoc denied: too many STAs on this AP", -+ /*18 */ "Assoc denied: requesting STA doesnt support all data rates in basic set", -+ /*19 */ "Assoc denied: requesting STA doesnt support Short Preamble", -+ /*20 */ "Assoc denied: requesting STA doesnt support PBCC Modulation", -+ /*21 */ "Assoc denied: requesting STA doesnt support Channel Agility" -+ /*22 */ "reserved", -+ /*23 */ "reserved", -+ /*24 */ "reserved", -+ /*25 */ "Assoc denied: requesting STA doesnt support Short Slot Time", -+ /*26 */ "Assoc denied: requesting STA doesnt support DSSS-OFDM" -+ }; -+ -+ return status_str[status < VEC_SIZE(status_str) ? status : 2]; -+} -+ -+ -+/*********************************************************************** -+*/ -+void -+acx_log_bad_eid(wlan_hdr_t* hdr, int len, wlan_ie_t* ie_ptr) -+{ -+ if (acx_debug & L_ASSOC) { -+ int offset = (u8*)ie_ptr - (u8*)hdr; -+ printk("acx: unknown EID %d in mgmt frame at offset %d. IE: ", -+ ie_ptr->eid, offset); -+ /* IE len can be bogus, IE can extend past packet end. Oh well... */ -+ acx_dump_bytes(ie_ptr, ie_ptr->len + 2); -+ if (acx_debug & L_DATA) { -+ printk("frame (%s): ", -+ acx_get_packet_type_string(le16_to_cpu(hdr->fc))); -+ acx_dump_bytes(hdr, len); -+ } -+ } -+} -+ -+ -+/*********************************************************************** -+*/ -+#if ACX_DEBUG -+void -+acx_dump_bytes(const void *data, int num) -+{ -+ const u8* ptr = (const u8*)data; -+ -+ if (num <= 0) { -+ printk("\n"); -+ return; -+ } -+ -+ while (num >= 16) { -+ printk( "%02X %02X %02X %02X %02X %02X %02X %02X " -+ "%02X %02X %02X %02X %02X %02X %02X %02X\n", -+ ptr[0], ptr[1], ptr[2], ptr[3], -+ ptr[4], ptr[5], ptr[6], ptr[7], -+ ptr[8], ptr[9], ptr[10], ptr[11], -+ ptr[12], ptr[13], ptr[14], ptr[15]); -+ num -= 16; -+ ptr += 16; -+ } -+ if (num > 0) { -+ while (--num > 0) -+ printk("%02X ", *ptr++); -+ printk("%02X\n", *ptr); -+ } -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_s_get_firmware_version -+*/ -+void -+acx_s_get_firmware_version(acx_device_t *adev) -+{ -+ fw_ver_t fw; -+ u8 hexarr[4] = { 0, 0, 0, 0 }; -+ int hexidx = 0, val = 0; -+ const char *num; -+ char c; -+ -+ FN_ENTER; -+ -+ memset(fw.fw_id, 'E', FW_ID_SIZE); -+ acx_s_interrogate(adev, &fw, ACX1xx_IE_FWREV); -+ memcpy(adev->firmware_version, fw.fw_id, FW_ID_SIZE); -+ adev->firmware_version[FW_ID_SIZE] = '\0'; -+ -+ log(L_DEBUG, "fw_ver: fw_id='%s' hw_id=%08X\n", -+ adev->firmware_version, fw.hw_id); -+ -+ if (strncmp(fw.fw_id, "Rev ", 4) != 0) { -+ printk("acx: strange firmware version string " -+ "'%s', please report\n", adev->firmware_version); -+ adev->firmware_numver = 0x01090407; /* assume 1.9.4.7 */ -+ } else { -+ num = &fw.fw_id[4]; -+ while (1) { -+ c = *num++; -+ if ((c == '.') || (c == '\0')) { -+ hexarr[hexidx++] = val; -+ if ((hexidx > 3) || (c == '\0')) /* end? */ -+ break; -+ val = 0; -+ continue; -+ } -+ if ((c >= '0') && (c <= '9')) -+ c -= '0'; -+ else -+ c = c - 'a' + (char)10; -+ val = val*16 + c; -+ } -+ -+ adev->firmware_numver = (u32)( -+ (hexarr[0] << 24) | (hexarr[1] << 16) -+ | (hexarr[2] << 8) | hexarr[3]); -+ log(L_DEBUG, "firmware_numver 0x%08X\n", adev->firmware_numver); -+ } -+ if (IS_ACX111(adev)) { -+ if (adev->firmware_numver == 0x00010011) { -+ /* This one does not survive floodpinging */ -+ printk("acx: firmware '%s' is known to be buggy, " -+ "please upgrade\n", adev->firmware_version); -+ } -+ } -+ -+ adev->firmware_id = le32_to_cpu(fw.hw_id); -+ -+ /* we're able to find out more detailed chip names now */ -+ switch (adev->firmware_id & 0xffff0000) { -+ case 0x01010000: -+ case 0x01020000: -+ adev->chip_name = "TNETW1100A"; -+ break; -+ case 0x01030000: -+ adev->chip_name = "TNETW1100B"; -+ break; -+ case 0x03000000: -+ case 0x03010000: -+ adev->chip_name = "TNETW1130"; -+ break; -+ case 0x04030000: /* 0x04030101 is TNETW1450 */ -+ adev->chip_name = "TNETW1450"; -+ break; -+ default: -+ printk("acx: unknown chip ID 0x%08X, " -+ "please report\n", adev->firmware_id); -+ break; -+ } -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_display_hardware_details -+** -+** Displays hw/fw version, radio type etc... -+*/ -+void -+acx_display_hardware_details(acx_device_t *adev) -+{ -+ const char *radio_str, *form_str; -+ -+ FN_ENTER; -+ -+ switch (adev->radio_type) { -+ case RADIO_MAXIM_0D: -+ radio_str = "Maxim"; -+ break; -+ case RADIO_RFMD_11: -+ radio_str = "RFMD"; -+ break; -+ case RADIO_RALINK_15: -+ radio_str = "Ralink"; -+ break; -+ case RADIO_RADIA_16: -+ radio_str = "Radia"; -+ break; -+ case RADIO_UNKNOWN_17: -+ /* TI seems to have a radio which is -+ * additionally 802.11a capable, too */ -+ radio_str = "802.11a/b/g radio?! Please report"; -+ break; -+ case RADIO_UNKNOWN_19: -+ radio_str = "A radio used by Safecom cards?! Please report"; -+ break; -+ case RADIO_UNKNOWN_1B: -+ radio_str = "An unknown radio used by TNETW1450 USB adapters"; -+ break; -+ default: -+ radio_str = "UNKNOWN, please report radio type name!"; -+ break; -+ } -+ -+ switch (adev->form_factor) { -+ case 0x00: -+ form_str = "unspecified"; -+ break; -+ case 0x01: -+ form_str = "(mini-)PCI / CardBus"; -+ break; -+ case 0x02: -+ form_str = "USB"; -+ break; -+ case 0x03: -+ form_str = "Compact Flash"; -+ break; -+ default: -+ form_str = "UNKNOWN, please report"; -+ break; -+ } -+ -+ printk("acx: === chipset %s, radio type 0x%02X (%s), " -+ "form factor 0x%02X (%s), EEPROM version 0x%02X: " -+ "uploaded firmware '%s' ===\n", -+ adev->chip_name, adev->radio_type, radio_str, -+ adev->form_factor, form_str, adev->eeprom_version, -+ adev->firmware_version); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx_e_change_mtu(struct net_device *ndev, int mtu) -+{ -+ enum { -+ MIN_MTU = 256, -+ MAX_MTU = WLAN_DATA_MAXLEN - (ETH_HLEN) -+ }; -+ -+ if (mtu < MIN_MTU || mtu > MAX_MTU) -+ return -EINVAL; -+ -+ ndev->mtu = mtu; -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** acx_e_get_stats, acx_e_get_wireless_stats -+*/ -+struct net_device_stats* -+acx_e_get_stats(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ return &adev->stats; -+} -+ -+struct iw_statistics* -+acx_e_get_wireless_stats(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ return &adev->wstats; -+} -+ -+ -+/*********************************************************************** -+** maps acx111 tx descr rate field to acx100 one -+*/ -+const u8 -+acx_bitpos2rate100[] = { -+ RATE100_1 ,/* 0 */ -+ RATE100_2 ,/* 1 */ -+ RATE100_5 ,/* 2 */ -+ RATE100_2 ,/* 3, should not happen */ -+ RATE100_2 ,/* 4, should not happen */ -+ RATE100_11 ,/* 5 */ -+ RATE100_2 ,/* 6, should not happen */ -+ RATE100_2 ,/* 7, should not happen */ -+ RATE100_22 ,/* 8 */ -+ RATE100_2 ,/* 9, should not happen */ -+ RATE100_2 ,/* 10, should not happen */ -+ RATE100_2 ,/* 11, should not happen */ -+ RATE100_2 ,/* 12, should not happen */ -+ RATE100_2 ,/* 13, should not happen */ -+ RATE100_2 ,/* 14, should not happen */ -+ RATE100_2 ,/* 15, should not happen */ -+}; -+ -+u8 -+acx_rate111to100(u16 r) { -+ return acx_bitpos2rate100[highest_bit(r)]; -+} -+ -+ -+/*********************************************************************** -+** Calculate level like the feb 2003 windows driver seems to do -+*/ -+static u8 -+acx_signal_to_winlevel(u8 rawlevel) -+{ -+ /* u8 winlevel = (u8) (0.5 + 0.625 * rawlevel); */ -+ u8 winlevel = ((4 + (rawlevel * 5)) / 8); -+ -+ if (winlevel > 100) -+ winlevel = 100; -+ return winlevel; -+} -+ -+u8 -+acx_signal_determine_quality(u8 signal, u8 noise) -+{ -+ int qual; -+ -+ qual = (((signal - 30) * 100 / 70) + (100 - noise * 4)) / 2; -+ -+ if (qual > 100) -+ return 100; -+ if (qual < 0) -+ return 0; -+ return qual; -+} -+ -+ -+/*********************************************************************** -+** Interrogate/configure commands -+*/ -+ -+/* FIXME: the lengths given here probably aren't always correct. -+ * They should be gradually replaced by proper "sizeof(acx1XX_ie_XXXX)-4", -+ * unless the firmware actually expects a different length than the struct length */ -+static const u16 -+acx100_ie_len[] = { -+ 0, -+ ACX100_IE_ACX_TIMER_LEN, -+ sizeof(acx100_ie_powersave_t)-4, /* is that 6 or 8??? */ -+ ACX1xx_IE_QUEUE_CONFIG_LEN, -+ ACX100_IE_BLOCK_SIZE_LEN, -+ ACX1xx_IE_MEMORY_CONFIG_OPTIONS_LEN, -+ ACX1xx_IE_RATE_FALLBACK_LEN, -+ ACX100_IE_WEP_OPTIONS_LEN, -+ ACX1xx_IE_MEMORY_MAP_LEN, /* ACX1xx_IE_SSID_LEN, */ -+ 0, -+ ACX1xx_IE_ASSOC_ID_LEN, -+ 0, -+ ACX111_IE_CONFIG_OPTIONS_LEN, -+ ACX1xx_IE_FWREV_LEN, -+ ACX1xx_IE_FCS_ERROR_COUNT_LEN, -+ ACX1xx_IE_MEDIUM_USAGE_LEN, -+ ACX1xx_IE_RXCONFIG_LEN, -+ 0, -+ 0, -+ sizeof(fw_stats_t)-4, -+ 0, -+ ACX1xx_IE_FEATURE_CONFIG_LEN, -+ ACX111_IE_KEY_CHOOSE_LEN, -+ ACX1FF_IE_MISC_CONFIG_TABLE_LEN, -+ ACX1FF_IE_WONE_CONFIG_LEN, -+ 0, -+ ACX1FF_IE_TID_CONFIG_LEN, -+ 0, -+ 0, -+ 0, -+ ACX1FF_IE_CALIB_ASSESSMENT_LEN, -+ ACX1FF_IE_BEACON_FILTER_OPTIONS_LEN, -+ ACX1FF_IE_LOW_RSSI_THRESH_OPT_LEN, -+ ACX1FF_IE_NOISE_HISTOGRAM_RESULTS_LEN, -+ 0, -+ ACX1FF_IE_PACKET_DETECT_THRESH_LEN, -+ ACX1FF_IE_TX_CONFIG_OPTIONS_LEN, -+ ACX1FF_IE_CCA_THRESHOLD_LEN, -+ ACX1FF_IE_EVENT_MASK_LEN, -+ ACX1FF_IE_DTIM_PERIOD_LEN, -+ 0, -+ ACX1FF_IE_ACI_CONFIG_SET_LEN, -+ 0, -+ 0, -+ 0, -+ 0, -+ 0, -+ 0, -+ ACX1FF_IE_EEPROM_VER_LEN, -+}; -+ -+static const u16 -+acx100_ie_len_dot11[] = { -+ 0, -+ ACX1xx_IE_DOT11_STATION_ID_LEN, -+ 0, -+ ACX100_IE_DOT11_BEACON_PERIOD_LEN, -+ ACX1xx_IE_DOT11_DTIM_PERIOD_LEN, -+ ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN, -+ ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN, -+ ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE_LEN, -+ ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN, -+ 0, -+ ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN_LEN, -+ ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN, -+ 0, -+ ACX1xx_IE_DOT11_TX_POWER_LEVEL_LEN, -+ ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN, -+ ACX100_IE_DOT11_ED_THRESHOLD_LEN, -+ ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET_LEN, -+ 0, -+ 0, -+ 0, -+}; -+ -+static const u16 -+acx111_ie_len[] = { -+ 0, -+ ACX100_IE_ACX_TIMER_LEN, -+ sizeof(acx111_ie_powersave_t)-4, -+ ACX1xx_IE_QUEUE_CONFIG_LEN, -+ ACX100_IE_BLOCK_SIZE_LEN, -+ ACX1xx_IE_MEMORY_CONFIG_OPTIONS_LEN, -+ ACX1xx_IE_RATE_FALLBACK_LEN, -+ ACX100_IE_WEP_OPTIONS_LEN, -+ ACX1xx_IE_MEMORY_MAP_LEN, /* ACX1xx_IE_SSID_LEN, */ -+ 0, -+ ACX1xx_IE_ASSOC_ID_LEN, -+ 0, -+ ACX111_IE_CONFIG_OPTIONS_LEN, -+ ACX1xx_IE_FWREV_LEN, -+ ACX1xx_IE_FCS_ERROR_COUNT_LEN, -+ ACX1xx_IE_MEDIUM_USAGE_LEN, -+ ACX1xx_IE_RXCONFIG_LEN, -+ 0, -+ 0, -+ sizeof(fw_stats_t)-4, -+ 0, -+ ACX1xx_IE_FEATURE_CONFIG_LEN, -+ ACX111_IE_KEY_CHOOSE_LEN, -+ ACX1FF_IE_MISC_CONFIG_TABLE_LEN, -+ ACX1FF_IE_WONE_CONFIG_LEN, -+ 0, -+ ACX1FF_IE_TID_CONFIG_LEN, -+ 0, -+ 0, -+ 0, -+ ACX1FF_IE_CALIB_ASSESSMENT_LEN, -+ ACX1FF_IE_BEACON_FILTER_OPTIONS_LEN, -+ ACX1FF_IE_LOW_RSSI_THRESH_OPT_LEN, -+ ACX1FF_IE_NOISE_HISTOGRAM_RESULTS_LEN, -+ 0, -+ ACX1FF_IE_PACKET_DETECT_THRESH_LEN, -+ ACX1FF_IE_TX_CONFIG_OPTIONS_LEN, -+ ACX1FF_IE_CCA_THRESHOLD_LEN, -+ ACX1FF_IE_EVENT_MASK_LEN, -+ ACX1FF_IE_DTIM_PERIOD_LEN, -+ 0, -+ ACX1FF_IE_ACI_CONFIG_SET_LEN, -+ 0, -+ 0, -+ 0, -+ 0, -+ 0, -+ 0, -+ ACX1FF_IE_EEPROM_VER_LEN, -+}; -+ -+static const u16 -+acx111_ie_len_dot11[] = { -+ 0, -+ ACX1xx_IE_DOT11_STATION_ID_LEN, -+ 0, -+ ACX100_IE_DOT11_BEACON_PERIOD_LEN, -+ ACX1xx_IE_DOT11_DTIM_PERIOD_LEN, -+ ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN, -+ ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN, -+ ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE_LEN, -+ ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN, -+ 0, -+ ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN_LEN, -+ ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN, -+ 0, -+ ACX1xx_IE_DOT11_TX_POWER_LEVEL_LEN, -+ ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN, -+ ACX100_IE_DOT11_ED_THRESHOLD_LEN, -+ ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET_LEN, -+ 0, -+ 0, -+ 0, -+}; -+ -+ -+#undef FUNC -+#define FUNC "configure" -+#if !ACX_DEBUG -+int -+acx_s_configure(acx_device_t *adev, void *pdr, int type) -+{ -+#else -+int -+acx_s_configure_debug(acx_device_t *adev, void *pdr, int type, const char* typestr) -+{ -+#endif -+ u16 len; -+ int res; -+ -+ if (type < 0x1000) -+ len = adev->ie_len[type]; -+ else -+ len = adev->ie_len_dot11[type - 0x1000]; -+ -+ log(L_CTL, FUNC"(type:%s,len:%u)\n", typestr, len); -+ if (unlikely(!len)) { -+ log(L_DEBUG, "zero-length type %s?!\n", typestr); -+ } -+ -+ ((acx_ie_generic_t *)pdr)->type = cpu_to_le16(type); -+ ((acx_ie_generic_t *)pdr)->len = cpu_to_le16(len); -+ res = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIGURE, pdr, len + 4); -+ if (unlikely(OK != res)) { -+#if ACX_DEBUG -+ printk("%s: "FUNC"(type:%s) FAILED\n", adev->ndev->name, typestr); -+#else -+ printk("%s: "FUNC"(type:0x%X) FAILED\n", adev->ndev->name, type); -+#endif -+ /* dump_stack() is already done in issue_cmd() */ -+ } -+ return res; -+} -+ -+#undef FUNC -+#define FUNC "interrogate" -+#if !ACX_DEBUG -+int -+acx_s_interrogate(acx_device_t *adev, void *pdr, int type) -+{ -+#else -+int -+acx_s_interrogate_debug(acx_device_t *adev, void *pdr, int type, -+ const char* typestr) -+{ -+#endif -+ u16 len; -+ int res; -+ -+ /* FIXME: no check whether this exceeds the array yet. -+ * We should probably remember the number of entries... */ -+ if (type < 0x1000) -+ len = adev->ie_len[type]; -+ else -+ len = adev->ie_len_dot11[type-0x1000]; -+ -+ log(L_CTL, FUNC"(type:%s,len:%u)\n", typestr, len); -+ -+ ((acx_ie_generic_t *)pdr)->type = cpu_to_le16(type); -+ ((acx_ie_generic_t *)pdr)->len = cpu_to_le16(len); -+ res = acx_s_issue_cmd(adev, ACX1xx_CMD_INTERROGATE, pdr, len + 4); -+ if (unlikely(OK != res)) { -+#if ACX_DEBUG -+ printk("%s: "FUNC"(type:%s) FAILED\n", adev->ndev->name, typestr); -+#else -+ printk("%s: "FUNC"(type:0x%X) FAILED\n", adev->ndev->name, type); -+#endif -+ /* dump_stack() is already done in issue_cmd() */ -+ } -+ return res; -+} -+ -+#if CMD_DISCOVERY -+void -+great_inquisitor(acx_device_t *adev) -+{ -+ static struct { -+ u16 type; -+ u16 len; -+ /* 0x200 was too large here: */ -+ u8 data[0x100 - 4]; -+ } ACX_PACKED ie; -+ u16 type; -+ -+ FN_ENTER; -+ -+ /* 0..0x20, 0x1000..0x1020 */ -+ for (type = 0; type <= 0x1020; type++) { -+ if (type == 0x21) -+ type = 0x1000; -+ ie.type = cpu_to_le16(type); -+ ie.len = cpu_to_le16(sizeof(ie) - 4); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_INTERROGATE, &ie, sizeof(ie)); -+ } -+ FN_EXIT0; -+} -+#endif -+ -+ -+#ifdef CONFIG_PROC_FS -+/*********************************************************************** -+** /proc files -+*/ -+/*********************************************************************** -+** acx_l_proc_output -+** Generate content for our /proc entry -+** -+** Arguments: -+** buf is a pointer to write output to -+** adev is the usual pointer to our private struct acx_device -+** Returns: -+** number of bytes actually written to buf -+** Side effects: -+** none -+*/ -+static int -+acx_l_proc_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ int i; -+ -+ FN_ENTER; -+ -+ p += sprintf(p, -+ "acx driver version:\t\t" ACX_RELEASE "\n" -+ "Wireless extension version:\t" STRING(WIRELESS_EXT) "\n" -+ "chip name:\t\t\t%s (0x%08X)\n" -+ "radio type:\t\t\t0x%02X\n" -+ "form factor:\t\t\t0x%02X\n" -+ "EEPROM version:\t\t\t0x%02X\n" -+ "firmware version:\t\t%s (0x%08X)\n", -+ adev->chip_name, adev->firmware_id, -+ adev->radio_type, -+ adev->form_factor, -+ adev->eeprom_version, -+ adev->firmware_version, adev->firmware_numver); -+ -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ struct client *bss = &adev->sta_list[i]; -+ if (!bss->used) continue; -+ p += sprintf(p, "BSS %u BSSID "MACSTR" ESSID %s channel %u " -+ "Cap 0x%X SIR %u SNR %u\n", -+ i, MAC(bss->bssid), (char*)bss->essid, bss->channel, -+ bss->cap_info, bss->sir, bss->snr); -+ } -+ p += sprintf(p, "status:\t\t\t%u (%s)\n", -+ adev->status, acx_get_status_name(adev->status)); -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_s_proc_diag_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ unsigned long flags; -+ unsigned int len = 0, partlen; -+ u32 temp1, temp2; -+ u8 *st, *st_end; -+#ifdef __BIG_ENDIAN -+ u8 *st2; -+#endif -+ fw_stats_t *fw_stats; -+ char *part_str = NULL; -+ fw_stats_tx_t *tx = NULL; -+ fw_stats_rx_t *rx = NULL; -+ fw_stats_dma_t *dma = NULL; -+ fw_stats_irq_t *irq = NULL; -+ fw_stats_wep_t *wep = NULL; -+ fw_stats_pwr_t *pwr = NULL; -+ fw_stats_mic_t *mic = NULL; -+ fw_stats_aes_t *aes = NULL; -+ fw_stats_event_t *evt = NULL; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+#if defined (ACX_MEM) -+ p = acxmem_s_proc_diag_output(p, adev); -+#else -+ if (IS_PCI(adev)) -+ p = acxpci_s_proc_diag_output(p, adev); -+#endif -+ -+ p += sprintf(p, -+ "\n" -+ "** network status **\n" -+ "dev_state_mask 0x%04X\n" -+ "status %u (%s), " -+ "mode %u, channel %u, " -+ "reg_dom_id 0x%02X, reg_dom_chanmask 0x%04X, ", -+ adev->dev_state_mask, -+ adev->status, acx_get_status_name(adev->status), -+ adev->mode, adev->channel, -+ adev->reg_dom_id, adev->reg_dom_chanmask -+ ); -+ p += sprintf(p, -+ "ESSID \"%s\", essid_active %d, essid_len %d, " -+ "essid_for_assoc \"%s\", nick \"%s\"\n" -+ "WEP ena %d, restricted %d, idx %d\n", -+ adev->essid, adev->essid_active, (int)adev->essid_len, -+ adev->essid_for_assoc, adev->nick, -+ adev->wep_enabled, adev->wep_restricted, -+ adev->wep_current_index); -+ p += sprintf(p, "dev_addr "MACSTR"\n", MAC(adev->dev_addr)); -+ p += sprintf(p, "bssid "MACSTR"\n", MAC(adev->bssid)); -+ p += sprintf(p, "ap_filter "MACSTR"\n", MAC(adev->ap)); -+ -+ p += sprintf(p, -+ "\n" -+ "** PHY status **\n" -+ "tx_disabled %d, tx_level_dbm %d\n" /* "tx_level_val %d, tx_level_auto %d\n" */ -+ "sensitivity %d, antenna 0x%02X, ed_threshold %d, cca %d, preamble_mode %d\n" -+ "rate_basic 0x%04X, rate_oper 0x%04X\n" -+ "rts_threshold %d, frag_threshold %d, short_retry %d, long_retry %d\n" -+ "msdu_lifetime %d, listen_interval %d, beacon_interval %d\n", -+ adev->tx_disabled, adev->tx_level_dbm, /* adev->tx_level_val, adev->tx_level_auto, */ -+ adev->sensitivity, adev->antenna, adev->ed_threshold, adev->cca, adev->preamble_mode, -+ adev->rate_basic, adev->rate_oper, -+ adev->rts_threshold, adev->frag_threshold, adev->short_retry, adev->long_retry, -+ adev->msdu_lifetime, adev->listen_interval, adev->beacon_interval); -+ -+ acx_unlock(adev, flags); -+ -+ p += sprintf(p, -+ "\n" -+ "** Firmware **\n" -+ "NOTE: version dependent statistics layout, " -+ "please report if you suspect wrong parsing!\n" -+ "\n" -+ "version \"%s\"\n", adev->firmware_version); -+ -+ /* TODO: may replace kmalloc/memset with kzalloc once -+ * Linux 2.6.14 is widespread */ -+ fw_stats = kmalloc(sizeof(*fw_stats), GFP_KERNEL); -+ if (!fw_stats) { -+ FN_EXIT1(0); -+ return 0; -+ } -+ memset(fw_stats, 0, sizeof(*fw_stats)); -+ -+ st = (u8 *)fw_stats; -+ -+ part_str = "statistics query command"; -+ -+ if (OK != acx_s_interrogate(adev, st, ACX1xx_IE_FIRMWARE_STATISTICS)) -+ goto fw_stats_end; -+ -+ st += sizeof(u16); -+ len = *(u16 *)st; -+ -+ if (len > sizeof(*fw_stats)) { -+ p += sprintf(p, -+ "firmware version with bigger fw_stats struct detected\n" -+ "(%u vs. %u), please report\n", len, sizeof(fw_stats_t)); -+ if (len > sizeof(*fw_stats)) { -+ p += sprintf(p, "struct size exceeded allocation!\n"); -+ len = sizeof(*fw_stats); -+ } -+ } -+ st += sizeof(u16); -+ st_end = st - 2*sizeof(u16) + len; -+ -+#ifdef __BIG_ENDIAN -+ /* let's make one bold assumption here: -+ * (hopefully!) *all* statistics fields are u32 only, -+ * thus if we need to make endianness corrections -+ * we can simply do them in one go, in advance */ -+ st2 = (u8 *)fw_stats; -+ for (temp1 = 0; temp1 < len; temp1 += 4, st2 += 4) -+ *(u32 *)st2 = le32_to_cpu(*(u32 *)st2); -+#endif -+ -+ part_str = "Rx/Tx"; -+ -+ /* directly at end of a struct part? --> no error! */ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ tx = (fw_stats_tx_t *)st; -+ st += sizeof(fw_stats_tx_t); -+ rx = (fw_stats_rx_t *)st; -+ st += sizeof(fw_stats_rx_t); -+ partlen = sizeof(fw_stats_tx_t) + sizeof(fw_stats_rx_t); -+ -+ if (IS_ACX100(adev)) { -+ /* at least ACX100 PCI F/W 1.9.8.b -+ * and ACX100 USB F/W 1.0.7-USB -+ * don't have those two fields... */ -+ st -= 2*sizeof(u32); -+ -+ /* our parsing doesn't quite match this firmware yet, -+ * log failure */ -+ if (st > st_end) -+ goto fw_stats_fail; -+ temp1 = temp2 = 999999999; -+ } else { -+ if (st > st_end) -+ goto fw_stats_fail; -+ temp1 = rx->rx_aci_events; -+ temp2 = rx->rx_aci_resets; -+ } -+ -+ p += sprintf(p, -+ "%s:\n" -+ " tx_desc_overfl %u\n" -+ " rx_OutOfMem %u, rx_hdr_overfl %u, rx_hw_stuck %u\n" -+ " rx_dropped_frame %u, rx_frame_ptr_err %u, rx_xfr_hint_trig %u\n" -+ " rx_aci_events %u, rx_aci_resets %u\n", -+ part_str, -+ tx->tx_desc_of, -+ rx->rx_oom, -+ rx->rx_hdr_of, -+ rx->rx_hw_stuck, -+ rx->rx_dropped_frame, -+ rx->rx_frame_ptr_err, -+ rx->rx_xfr_hint_trig, -+ temp1, -+ temp2); -+ -+ part_str = "DMA"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ dma = (fw_stats_dma_t *)st; -+ partlen = sizeof(fw_stats_dma_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " rx_dma_req %u, rx_dma_err %u, tx_dma_req %u, tx_dma_err %u\n", -+ part_str, -+ dma->rx_dma_req, -+ dma->rx_dma_err, -+ dma->tx_dma_req, -+ dma->tx_dma_err); -+ -+ part_str = "IRQ"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ irq = (fw_stats_irq_t *)st; -+ partlen = sizeof(fw_stats_irq_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " cmd_cplt %u, fiq %u\n" -+ " rx_hdrs %u, rx_cmplt %u, rx_mem_overfl %u, rx_rdys %u\n" -+ " irqs %u, tx_procs %u, decrypt_done %u\n" -+ " dma_0_done %u, dma_1_done %u, tx_exch_complet %u\n" -+ " commands %u, rx_procs %u, hw_pm_mode_changes %u\n" -+ " host_acks %u, pci_pm %u, acm_wakeups %u\n", -+ part_str, -+ irq->cmd_cplt, -+ irq->fiq, -+ irq->rx_hdrs, -+ irq->rx_cmplt, -+ irq->rx_mem_of, -+ irq->rx_rdys, -+ irq->irqs, -+ irq->tx_procs, -+ irq->decrypt_done, -+ irq->dma_0_done, -+ irq->dma_1_done, -+ irq->tx_exch_complet, -+ irq->commands, -+ irq->rx_procs, -+ irq->hw_pm_mode_changes, -+ irq->host_acks, -+ irq->pci_pm, -+ irq->acm_wakeups); -+ -+ part_str = "WEP"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ wep = (fw_stats_wep_t *)st; -+ partlen = sizeof(fw_stats_wep_t); -+ st += partlen; -+ -+ if ( -+ (IS_PCI(adev) && IS_ACX100(adev)) -+ || (IS_USB(adev) && IS_ACX100(adev)) -+ || (IS_MEM(adev) && IS_ACX100(adev)) -+ ) { -+ /* at least ACX100 PCI F/W 1.9.8.b, -+ * ACX100 USB F/W 1.0.7-USB -+ * and ACX100 Generic Slave F/W 1.10.7.K -+ * don't have those two fields... -+ */ -+ st -= 2*sizeof(u32); -+ if (st > st_end) -+ goto fw_stats_fail; -+ temp1 = temp2 = 999999999; -+ } else { -+ if (st > st_end) -+ goto fw_stats_fail; -+ temp1 = wep->wep_pkt_decrypt; -+ temp2 = wep->wep_decrypt_irqs; -+ } -+ -+ p += sprintf(p, -+ "%s:\n" -+ " wep_key_count %u, wep_default_key_count %u, dot11_def_key_mib %u\n" -+ " wep_key_not_found %u, wep_decrypt_fail %u\n" -+ " wep_pkt_decrypt %u, wep_decrypt_irqs %u\n", -+ part_str, -+ wep->wep_key_count, -+ wep->wep_default_key_count, -+ wep->dot11_def_key_mib, -+ wep->wep_key_not_found, -+ wep->wep_decrypt_fail, -+ temp1, -+ temp2); -+ -+ part_str = "power"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ pwr = (fw_stats_pwr_t *)st; -+ partlen = sizeof(fw_stats_pwr_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " tx_start_ctr %u, no_ps_tx_too_short %u\n" -+ " rx_start_ctr %u, no_ps_rx_too_short %u\n" -+ " lppd_started %u\n" -+ " no_lppd_too_noisy %u, no_lppd_too_short %u, no_lppd_matching_frame %u\n", -+ part_str, -+ pwr->tx_start_ctr, -+ pwr->no_ps_tx_too_short, -+ pwr->rx_start_ctr, -+ pwr->no_ps_rx_too_short, -+ pwr->lppd_started, -+ pwr->no_lppd_too_noisy, -+ pwr->no_lppd_too_short, -+ pwr->no_lppd_matching_frame); -+ -+ part_str = "MIC"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ mic = (fw_stats_mic_t *)st; -+ partlen = sizeof(fw_stats_mic_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " mic_rx_pkts %u, mic_calc_fail %u\n", -+ part_str, -+ mic->mic_rx_pkts, -+ mic->mic_calc_fail); -+ -+ part_str = "AES"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ aes = (fw_stats_aes_t *)st; -+ partlen = sizeof(fw_stats_aes_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " aes_enc_fail %u, aes_dec_fail %u\n" -+ " aes_enc_pkts %u, aes_dec_pkts %u\n" -+ " aes_enc_irq %u, aes_dec_irq %u\n", -+ part_str, -+ aes->aes_enc_fail, -+ aes->aes_dec_fail, -+ aes->aes_enc_pkts, -+ aes->aes_dec_pkts, -+ aes->aes_enc_irq, -+ aes->aes_dec_irq); -+ -+ part_str = "event"; -+ -+ if (st == st_end) -+ goto fw_stats_end; -+ -+ evt = (fw_stats_event_t *)st; -+ partlen = sizeof(fw_stats_event_t); -+ st += partlen; -+ -+ if (st > st_end) -+ goto fw_stats_fail; -+ -+ p += sprintf(p, -+ "%s:\n" -+ " heartbeat %u, calibration %u\n" -+ " rx_mismatch %u, rx_mem_empty %u, rx_pool %u\n" -+ " oom_late %u\n" -+ " phy_tx_err %u, tx_stuck %u\n", -+ part_str, -+ evt->heartbeat, -+ evt->calibration, -+ evt->rx_mismatch, -+ evt->rx_mem_empty, -+ evt->rx_pool, -+ evt->oom_late, -+ evt->phy_tx_err, -+ evt->tx_stuck); -+ -+ if (st < st_end) -+ goto fw_stats_bigger; -+ -+ goto fw_stats_end; -+ -+fw_stats_fail: -+ st -= partlen; -+ p += sprintf(p, -+ "failed at %s part (size %u), offset %u (struct size %u), " -+ "please report\n", part_str, partlen, -+ (int)st - (int)fw_stats, len); -+ -+fw_stats_bigger: -+ for (; st < st_end; st += 4) -+ p += sprintf(p, -+ "UNKN%3d: %u\n", (int)st - (int)fw_stats, *(u32 *)st); -+ -+fw_stats_end: -+ kfree(fw_stats); -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_s_proc_phy_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ int i; -+ -+ FN_ENTER; -+ -+ /* -+ if (RADIO_RFMD_11 != adev->radio_type) { -+ printk("sorry, not yet adapted for radio types " -+ "other than RFMD, please verify " -+ "PHY size etc. first!\n"); -+ goto end; -+ } -+ */ -+ -+ /* The PHY area is only 0x80 bytes long; further pages after that -+ * only have some page number registers with altered value, -+ * all other registers remain the same. */ -+ for (i = 0; i < 0x80; i++) { -+ acx_s_read_phy_reg(adev, i, p++); -+ } -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+** acx_e_read_proc_XXXX -+** Handle our /proc entry -+** -+** Arguments: -+** standard kernel read_proc interface -+** Returns: -+** number of bytes written to buf -+** Side effects: -+** none -+*/ -+static int -+acx_e_read_proc(char *buf, char **start, off_t offset, int count, -+ int *eof, void *data) -+{ -+ acx_device_t *adev = (acx_device_t*)data; -+ unsigned long flags; -+ int length; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ acx_lock(adev, flags); -+ /* fill buf */ -+ length = acx_l_proc_output(buf, adev); -+ acx_unlock(adev, flags); -+ acx_sem_unlock(adev); -+ -+ /* housekeeping */ -+ if (length <= offset + count) -+ *eof = 1; -+ *start = buf + offset; -+ length -= offset; -+ if (length > count) -+ length = count; -+ if (length < 0) -+ length = 0; -+ FN_EXIT1(length); -+ return length; -+} -+ -+static char _buf[32768]; -+static int -+acx_e_read_proc_diag(char *buf, char **start, off_t offset, int count, -+ int *eof, void *data) -+{ -+ acx_device_t *adev = (acx_device_t*)data; -+ int length; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ /* fill buf */ -+ length = acx_s_proc_diag_output(_buf, adev); -+ acx_sem_unlock(adev); -+ -+ memcpy(buf, _buf + offset, count); -+ -+ /* housekeeping */ -+ if (length <= offset + count) -+ *eof = 1; -+ *start = count; -+ length -= offset; -+ if (length > count) -+ length = count; -+ if (length < 0) -+ length = 0; -+ FN_EXIT1(length); -+ return length; -+} -+ -+static int -+acx_e_read_proc_eeprom(char *buf, char **start, off_t offset, int count, -+ int *eof, void *data) -+{ -+ acx_device_t *adev = (acx_device_t*)data; -+ int length; -+ -+ FN_ENTER; -+ -+ /* fill buf */ -+ length = 0; -+#if defined (ACX_MEM) -+ acx_sem_lock(adev); -+ length = acxmem_proc_eeprom_output(buf, adev); -+ acx_sem_unlock(adev); -+#else -+ if (IS_PCI(adev)) { -+ acx_sem_lock(adev); -+ length = acxpci_proc_eeprom_output(buf, adev); -+ acx_sem_unlock(adev); -+ } -+#endif -+ -+ /* housekeeping */ -+ if (length <= offset + count) -+ *eof = 1; -+ *start = buf + offset; -+ length -= offset; -+ if (length > count) -+ length = count; -+ if (length < 0) -+ length = 0; -+ FN_EXIT1(length); -+ return length; -+} -+ -+static int -+acx_e_read_proc_phy(char *buf, char **start, off_t offset, int count, -+ int *eof, void *data) -+{ -+ acx_device_t *adev = (acx_device_t*)data; -+ int length; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ /* fill buf */ -+ length = acx_s_proc_phy_output(buf, adev); -+ acx_sem_unlock(adev); -+ -+ /* housekeeping */ -+ if (length <= offset + count) -+ *eof = 1; -+ *start = buf + offset; -+ length -= offset; -+ if (length > count) -+ length = count; -+ if (length < 0) -+ length = 0; -+ FN_EXIT1(length); -+ return length; -+} -+ -+ -+/*********************************************************************** -+** /proc files registration -+*/ -+static const char * const -+proc_files[] = { "", "_diag", "_eeprom", "_phy" }; -+ -+static read_proc_t * const -+proc_funcs[] = { -+ acx_e_read_proc, -+ acx_e_read_proc_diag, -+ acx_e_read_proc_eeprom, -+ acx_e_read_proc_phy -+}; -+ -+static int -+manage_proc_entries(const struct net_device *ndev, int remove) -+{ -+ acx_device_t *adev = ndev2adev((struct net_device *)ndev); -+ char procbuf[80]; -+ int i; -+ -+ for (i = 0; i < VEC_SIZE(proc_files); i++) { -+ snprintf(procbuf, sizeof(procbuf), -+ "driver/acx_%s%s", ndev->name, proc_files[i]); -+ log(L_INIT, "%sing /proc entry %s\n", -+ remove ? "remov" : "creat", procbuf); -+ if (!remove) { -+ if (!create_proc_read_entry(procbuf, 0, 0, proc_funcs[i], adev)) { -+ printk("acx: cannot register /proc entry %s\n", procbuf); -+ return NOT_OK; -+ } -+ } else { -+ remove_proc_entry(procbuf, NULL); -+ } -+ } -+ return OK; -+} -+ -+int -+acx_proc_register_entries(const struct net_device *ndev) -+{ -+ return manage_proc_entries(ndev, 0); -+} -+ -+int -+acx_proc_unregister_entries(const struct net_device *ndev) -+{ -+ return manage_proc_entries(ndev, 1); -+} -+#endif /* CONFIG_PROC_FS */ -+ -+ -+/*********************************************************************** -+** acx_cmd_join_bssid -+** -+** Common code for both acx100 and acx111. -+*/ -+/* NB: does NOT match RATE100_nn but matches ACX[111]_SCAN_RATE_n */ -+static const u8 -+bitpos2genframe_txrate[] = { -+ 10, /* 0. 1 Mbit/s */ -+ 20, /* 1. 2 Mbit/s */ -+ 55, /* 2. 5.5 Mbit/s */ -+ 0x0B, /* 3. 6 Mbit/s */ -+ 0x0F, /* 4. 9 Mbit/s */ -+ 110, /* 5. 11 Mbit/s */ -+ 0x0A, /* 6. 12 Mbit/s */ -+ 0x0E, /* 7. 18 Mbit/s */ -+ 220, /* 8. 22 Mbit/s */ -+ 0x09, /* 9. 24 Mbit/s */ -+ 0x0D, /* 10. 36 Mbit/s */ -+ 0x08, /* 11. 48 Mbit/s */ -+ 0x0C, /* 12. 54 Mbit/s */ -+ 10, /* 13. 1 Mbit/s, should never happen */ -+ 10, /* 14. 1 Mbit/s, should never happen */ -+ 10, /* 15. 1 Mbit/s, should never happen */ -+}; -+ -+/* Looks scary, eh? -+** Actually, each one compiled into one AND and one SHIFT, -+** 31 bytes in x86 asm (more if uints are replaced by u16/u8) */ -+static inline unsigned int -+rate111to5bits(unsigned int rate) -+{ -+ return (rate & 0x7) -+ | ( (rate & RATE111_11) / (RATE111_11/JOINBSS_RATES_11) ) -+ | ( (rate & RATE111_22) / (RATE111_22/JOINBSS_RATES_22) ) -+ ; -+} -+ -+static void -+acx_s_cmd_join_bssid(acx_device_t *adev, const u8 *bssid) -+{ -+ acx_joinbss_t tmp; -+ int dtim_interval; -+ int i; -+ -+ if (mac_is_zero(bssid)) -+ return; -+ -+ FN_ENTER; -+ -+ dtim_interval = (ACX_MODE_0_ADHOC == adev->mode) ? -+ 1 : adev->dtim_interval; -+ -+ memset(&tmp, 0, sizeof(tmp)); -+ -+ for (i = 0; i < ETH_ALEN; i++) { -+ tmp.bssid[i] = bssid[ETH_ALEN-1 - i]; -+ } -+ -+ tmp.beacon_interval = cpu_to_le16(adev->beacon_interval); -+ -+ /* Basic rate set. Control frame responses (such as ACK or CTS frames) -+ ** are sent with one of these rates */ -+ if (IS_ACX111(adev)) { -+ /* It was experimentally determined that rates_basic -+ ** can take 11g rates as well, not only rates -+ ** defined with JOINBSS_RATES_BASIC111_nnn. -+ ** Just use RATE111_nnn constants... */ -+ tmp.u.acx111.dtim_interval = dtim_interval; -+ tmp.u.acx111.rates_basic = cpu_to_le16(adev->rate_basic); -+ log(L_ASSOC, "rates_basic:%04X, rates_supported:%04X\n", -+ adev->rate_basic, adev->rate_oper); -+ } else { -+ tmp.u.acx100.dtim_interval = dtim_interval; -+ tmp.u.acx100.rates_basic = rate111to5bits(adev->rate_basic); -+ tmp.u.acx100.rates_supported = rate111to5bits(adev->rate_oper); -+ log(L_ASSOC, "rates_basic:%04X->%02X, " -+ "rates_supported:%04X->%02X\n", -+ adev->rate_basic, tmp.u.acx100.rates_basic, -+ adev->rate_oper, tmp.u.acx100.rates_supported); -+ } -+ -+ /* Setting up how Beacon, Probe Response, RTS, and PS-Poll frames -+ ** will be sent (rate/modulation/preamble) */ -+ tmp.u.txrate.genfrm_txrate = bitpos2genframe_txrate[lowest_bit(adev->rate_basic)]; -+ tmp.genfrm_mod_pre = 0; /* FIXME: was = adev->capab_short (which was always 0); */ -+ /* we can use short pre *if* all peers can understand it */ -+ /* FIXME #2: we need to correctly set PBCC/OFDM bits here too */ -+ -+ /* we switch fw to STA mode in MONITOR mode, it seems to be -+ ** the only mode where fw does not emit beacons by itself -+ ** but allows us to send anything (we really want to retain -+ ** ability to tx arbitrary frames in MONITOR mode) -+ */ -+ tmp.macmode = (adev->mode != ACX_MODE_MONITOR ? adev->mode : ACX_MODE_2_STA); -+ tmp.channel = adev->channel; -+ tmp.essid_len = adev->essid_len; -+ /* NOTE: the code memcpy'd essid_len + 1 before, which is WRONG! */ -+ memcpy(tmp.essid, adev->essid, tmp.essid_len); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_JOIN, &tmp, tmp.essid_len + 0x11); -+ -+ log(L_ASSOC|L_DEBUG, "BSS_Type = %u\n", tmp.macmode); -+ acxlog_mac(L_ASSOC|L_DEBUG, "JoinBSSID MAC:", adev->bssid, "\n"); -+ -+ acx_update_capabilities(adev); -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_s_cmd_start_scan -+** -+** Issue scan command to the hardware -+** -+** unified function for both ACX111 and ACX100 -+*/ -+static void -+acx_s_scan_chan(acx_device_t *adev) -+{ -+ union { -+ acx111_scan_t acx111; -+ acx100_scan_t acx100; -+ } s; -+ -+ FN_ENTER; -+ -+ memset(&s, 0, sizeof(s)); -+ -+ /* first common positions... */ -+ -+ s.acx111.count = cpu_to_le16(adev->scan_count); -+ s.acx111.rate = adev->scan_rate; -+ s.acx111.options = adev->scan_mode; -+ s.acx111.chan_duration = cpu_to_le16(adev->scan_duration); -+ s.acx111.max_probe_delay = cpu_to_le16(adev->scan_probe_delay); -+ -+ /* ...then differences */ -+ -+ if (IS_ACX111(adev)) { -+ s.acx111.channel_list_select = 0; /* scan every allowed channel */ -+ /*s.acx111.channel_list_select = 1;*/ /* scan given channels */ -+ /*s.acx111.modulation = 0x40;*/ /* long preamble? OFDM? -> only for active scan */ -+ s.acx111.modulation = 0; -+ /*s.acx111.channel_list[0] = 6; -+ s.acx111.channel_list[1] = 4;*/ -+ } else { -+ s.acx100.start_chan = cpu_to_le16(1); -+ s.acx100.flags = cpu_to_le16(0x8000); -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_SCAN, &s, sizeof(s)); -+ FN_EXIT0; -+} -+ -+ -+void -+acx_s_cmd_start_scan(acx_device_t *adev) -+{ -+ /* time_before check is 'just in case' thing */ -+ if (!(adev->irq_status & HOST_INT_SCAN_COMPLETE) -+ && time_before(jiffies, adev->scan_start + 10*HZ) -+ ) { -+ log(L_INIT, "start_scan: seems like previous scan " -+ "is still running. Not starting anew. Please report\n"); -+ return; -+ } -+ -+ log(L_INIT, "starting radio scan\n"); -+ /* remember that fw is commanded to do scan */ -+ adev->scan_start = jiffies; -+ CLEAR_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); -+ /* issue it */ -+ acx_s_scan_chan(adev); -+} -+ -+ -+/*********************************************************************** -+** acx111 feature config -+*/ -+static int -+acx111_s_get_feature_config(acx_device_t *adev, -+ u32 *feature_options, u32 *data_flow_options) -+{ -+ struct acx111_ie_feature_config feat; -+ -+ if (!IS_ACX111(adev)) { -+ return NOT_OK; -+ } -+ -+ memset(&feat, 0, sizeof(feat)); -+ -+ if (OK != acx_s_interrogate(adev, &feat, ACX1xx_IE_FEATURE_CONFIG)) { -+ return NOT_OK; -+ } -+ log(L_DEBUG, -+ "got Feature option:0x%X, DataFlow option: 0x%X\n", -+ feat.feature_options, -+ feat.data_flow_options); -+ -+ if (feature_options) -+ *feature_options = le32_to_cpu(feat.feature_options); -+ if (data_flow_options) -+ *data_flow_options = le32_to_cpu(feat.data_flow_options); -+ -+ return OK; -+} -+ -+static int -+acx111_s_set_feature_config(acx_device_t *adev, -+ u32 feature_options, u32 data_flow_options, -+ unsigned int mode /* 0 == remove, 1 == add, 2 == set */) -+{ -+ struct acx111_ie_feature_config feat; -+ -+ if (!IS_ACX111(adev)) { -+ return NOT_OK; -+ } -+ -+ if ((mode < 0) || (mode > 2)) -+ return NOT_OK; -+ -+ if (mode != 2) -+ /* need to modify old data */ -+ acx111_s_get_feature_config(adev, &feat.feature_options, &feat.data_flow_options); -+ else { -+ /* need to set a completely new value */ -+ feat.feature_options = 0; -+ feat.data_flow_options = 0; -+ } -+ -+ if (mode == 0) { /* remove */ -+ CLEAR_BIT(feat.feature_options, cpu_to_le32(feature_options)); -+ CLEAR_BIT(feat.data_flow_options, cpu_to_le32(data_flow_options)); -+ } else { /* add or set */ -+ SET_BIT(feat.feature_options, cpu_to_le32(feature_options)); -+ SET_BIT(feat.data_flow_options, cpu_to_le32(data_flow_options)); -+ } -+ -+ log(L_DEBUG, -+ "old: feature 0x%08X dataflow 0x%08X. mode: %u\n" -+ "new: feature 0x%08X dataflow 0x%08X\n", -+ feature_options, data_flow_options, mode, -+ le32_to_cpu(feat.feature_options), -+ le32_to_cpu(feat.data_flow_options)); -+ -+ if (OK != acx_s_configure(adev, &feat, ACX1xx_IE_FEATURE_CONFIG)) { -+ return NOT_OK; -+ } -+ -+ return OK; -+} -+ -+static inline int -+acx111_s_feature_off(acx_device_t *adev, u32 f, u32 d) -+{ -+ return acx111_s_set_feature_config(adev, f, d, 0); -+} -+static inline int -+acx111_s_feature_on(acx_device_t *adev, u32 f, u32 d) -+{ -+ return acx111_s_set_feature_config(adev, f, d, 1); -+} -+static inline int -+acx111_s_feature_set(acx_device_t *adev, u32 f, u32 d) -+{ -+ return acx111_s_set_feature_config(adev, f, d, 2); -+} -+ -+ -+/*********************************************************************** -+** acx100_s_init_memory_pools -+*/ -+static int -+acx100_s_init_memory_pools(acx_device_t *adev, const acx_ie_memmap_t *mmt) -+{ -+ acx100_ie_memblocksize_t MemoryBlockSize; -+ acx100_ie_memconfigoption_t MemoryConfigOption; -+ int TotalMemoryBlocks; -+ int RxBlockNum; -+ int TotalRxBlockSize; -+ int TxBlockNum; -+ int TotalTxBlockSize; -+ -+ FN_ENTER; -+ -+ /* Let's see if we can follow this: -+ first we select our memory block size (which I think is -+ completely arbitrary) */ -+ MemoryBlockSize.size = cpu_to_le16(adev->memblocksize); -+ -+ /* Then we alert the card to our decision of block size */ -+ if (OK != acx_s_configure(adev, &MemoryBlockSize, ACX100_IE_BLOCK_SIZE)) { -+ goto bad; -+ } -+ -+ /* We figure out how many total blocks we can create, using -+ the block size we chose, and the beginning and ending -+ memory pointers, i.e.: end-start/size */ -+ TotalMemoryBlocks = (le32_to_cpu(mmt->PoolEnd) - le32_to_cpu(mmt->PoolStart)) / adev->memblocksize; -+ -+ log(L_DEBUG, "TotalMemoryBlocks=%u (%u bytes)\n", -+ TotalMemoryBlocks, TotalMemoryBlocks*adev->memblocksize); -+ -+ /* MemoryConfigOption.DMA_config bitmask: -+ access to ACX memory is to be done: -+ 0x00080000 using PCI conf space?! -+ 0x00040000 using IO instructions? -+ 0x00000000 using memory access instructions -+ 0x00020000 using local memory block linked list (else what?) -+ 0x00010000 using host indirect descriptors (else host must access ACX memory?) -+ */ -+#if defined (ACX_MEM) -+ /* -+ * ACX ignores DMA_config for generic slave mode. -+ */ -+ MemoryConfigOption.DMA_config = 0; -+ /* Declare start of the Rx host pool */ -+ MemoryConfigOption.pRxHostDesc = cpu2acx(0); -+ log(L_DEBUG, "pRxHostDesc 0x%08X, rxhostdesc_startphy 0x%lX\n", -+ acx2cpu(MemoryConfigOption.pRxHostDesc), -+ (long)adev->rxhostdesc_startphy); -+#else -+ if (IS_PCI(adev)) { -+ MemoryConfigOption.DMA_config = cpu_to_le32(0x30000); -+ /* Declare start of the Rx host pool */ -+ MemoryConfigOption.pRxHostDesc = cpu2acx(adev->rxhostdesc_startphy); -+ log(L_DEBUG, "pRxHostDesc 0x%08X, rxhostdesc_startphy 0x%lX\n", -+ acx2cpu(MemoryConfigOption.pRxHostDesc), -+ (long)adev->rxhostdesc_startphy); -+ } else { -+ MemoryConfigOption.DMA_config = cpu_to_le32(0x20000); -+ } -+#endif -+ -+ /* 50% of the allotment of memory blocks go to tx descriptors */ -+ TxBlockNum = TotalMemoryBlocks / 2; -+ MemoryConfigOption.TxBlockNum = cpu_to_le16(TxBlockNum); -+ -+ /* and 50% go to the rx descriptors */ -+ RxBlockNum = TotalMemoryBlocks - TxBlockNum; -+ MemoryConfigOption.RxBlockNum = cpu_to_le16(RxBlockNum); -+ -+ /* size of the tx and rx descriptor queues */ -+ TotalTxBlockSize = TxBlockNum * adev->memblocksize; -+ TotalRxBlockSize = RxBlockNum * adev->memblocksize; -+ log(L_DEBUG, "TxBlockNum %u RxBlockNum %u TotalTxBlockSize %u " -+ "TotalTxBlockSize %u\n", TxBlockNum, RxBlockNum, -+ TotalTxBlockSize, TotalRxBlockSize); -+ -+ -+ /* align the tx descriptor queue to an alignment of 0x20 (32 bytes) */ -+ MemoryConfigOption.rx_mem = -+ cpu_to_le32((le32_to_cpu(mmt->PoolStart) + 0x1f) & ~0x1f); -+ -+ /* align the rx descriptor queue to units of 0x20 -+ * and offset it by the tx descriptor queue */ -+ MemoryConfigOption.tx_mem = -+ cpu_to_le32((le32_to_cpu(mmt->PoolStart) + TotalRxBlockSize + 0x1f) & ~0x1f); -+ log(L_DEBUG, "rx_mem %08X rx_mem %08X\n", -+ MemoryConfigOption.tx_mem, MemoryConfigOption.rx_mem); -+ -+ /* alert the device to our decision */ -+ if (OK != acx_s_configure(adev, &MemoryConfigOption, ACX1xx_IE_MEMORY_CONFIG_OPTIONS)) { -+ goto bad; -+ } -+ -+ /* and tell the device to kick it into gear */ -+ if (OK != acx_s_issue_cmd(adev, ACX100_CMD_INIT_MEMORY, NULL, 0)) { -+ goto bad; -+ } -+#ifdef ACX_MEM -+ /* -+ * slave memory interface has to manage the transmit pools for the ACX, -+ * so it needs to know what we chose here. -+ */ -+ adev->acx_txbuf_start = MemoryConfigOption.tx_mem; -+ adev->acx_txbuf_numblocks = MemoryConfigOption.TxBlockNum; -+#endif -+ -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx100_s_create_dma_regions -+** -+** Note that this fn messes up heavily with hardware, but we cannot -+** lock it (we need to sleep). Not a problem since IRQs can't happen -+*/ -+static int -+acx100_s_create_dma_regions(acx_device_t *adev) -+{ -+ acx100_ie_queueconfig_t queueconf; -+ acx_ie_memmap_t memmap; -+ int res = NOT_OK; -+ u32 tx_queue_start, rx_queue_start; -+ -+ FN_ENTER; -+ -+ /* read out the acx100 physical start address for the queues */ -+ if (OK != acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) { -+ goto fail; -+ } -+ -+ tx_queue_start = le32_to_cpu(memmap.QueueStart); -+ rx_queue_start = tx_queue_start + TX_CNT * sizeof(txdesc_t); -+ -+ log(L_DEBUG, "initializing Queue Indicator\n"); -+ -+ memset(&queueconf, 0, sizeof(queueconf)); -+ -+ /* Not needed for PCI or slave memory, so we can avoid setting them altogether */ -+ if (IS_USB(adev)) { -+ queueconf.NumTxDesc = USB_TX_CNT; -+ queueconf.NumRxDesc = USB_RX_CNT; -+ } -+ -+ /* calculate size of queues */ -+ queueconf.AreaSize = cpu_to_le32( -+ TX_CNT * sizeof(txdesc_t) + -+ RX_CNT * sizeof(rxdesc_t) + 8 -+ ); -+ queueconf.NumTxQueues = 1; /* number of tx queues */ -+ /* sets the beginning of the tx descriptor queue */ -+ queueconf.TxQueueStart = memmap.QueueStart; -+ /* done by memset: queueconf.TxQueuePri = 0; */ -+ queueconf.RxQueueStart = cpu_to_le32(rx_queue_start); -+ queueconf.QueueOptions = 1; /* auto reset descriptor */ -+ /* sets the end of the rx descriptor queue */ -+ queueconf.QueueEnd = cpu_to_le32( -+ rx_queue_start + RX_CNT * sizeof(rxdesc_t) -+ ); -+ /* sets the beginning of the next queue */ -+ queueconf.HostQueueEnd = cpu_to_le32(le32_to_cpu(queueconf.QueueEnd) + 8); -+ if (OK != acx_s_configure(adev, &queueconf, ACX1xx_IE_QUEUE_CONFIG)) { -+ goto fail; -+ } -+ -+#if defined (ACX_MEM) -+ /* sets the beginning of the rx descriptor queue, after the tx descrs */ -+ adev->acx_queue_indicator = -+ (queueindicator_t *) le32_to_cpu (queueconf.QueueEnd); -+ if (OK != acxmem_s_create_hostdesc_queues(adev)) -+ goto fail; -+ -+ acxmem_create_desc_queues(adev, tx_queue_start, rx_queue_start); -+#else -+ if (IS_PCI(adev)) { -+ /* sets the beginning of the rx descriptor queue, after the tx descrs */ -+ if (OK != acxpci_s_create_hostdesc_queues(adev)) -+ goto fail; -+ acxpci_create_desc_queues(adev, tx_queue_start, rx_queue_start); -+ } -+#endif -+ -+ if (OK != acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) { -+ goto fail; -+ } -+ -+ /* -+ * Have to make sure we skip past the Queue Indicator (QueueEnd) and Host Queue Indicator -+ * maps, each of which are 8 bytes and follow immediately after the transmit and -+ * receive queues. -+ */ -+ memmap.PoolStart = cpu_to_le32( -+ (le32_to_cpu(memmap.QueueEnd) + 4 + 0x1f) & ~0x1f -+ ); -+ -+ if (OK != acx_s_configure(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) { -+ goto fail; -+ } -+ -+ if (OK != acx100_s_init_memory_pools(adev, &memmap)) { -+ goto fail; -+ } -+ -+ res = OK; -+ goto end; -+ -+fail: -+ acx_s_msleep(1000); /* ? */ -+#if defined (ACX_MEM) -+ acxmem_free_desc_queues(adev); -+#else -+ if (IS_PCI(adev)) -+ acxpci_free_desc_queues(adev); -+#endif -+end: -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acx111_s_create_dma_regions -+** -+** Note that this fn messes heavily with hardware, but we cannot -+** lock it (we need to sleep). Not a problem since IRQs can't happen -+*/ -+#define ACX111_PERCENT(percent) ((percent)/5) -+ -+static int -+acx111_s_create_dma_regions(acx_device_t *adev) -+{ -+ struct acx111_ie_memoryconfig memconf; -+ struct acx111_ie_queueconfig queueconf; -+ u32 tx_queue_start, rx_queue_start; -+ -+ FN_ENTER; -+ -+ /* Calculate memory positions and queue sizes */ -+ -+ /* Set up our host descriptor pool + data pool */ -+#if defined (ACX_MEM) -+ if (OK != acxmem_s_create_hostdesc_queues(adev)) -+ goto fail; -+#else -+ if (IS_PCI(adev)) { -+ if (OK != acxpci_s_create_hostdesc_queues(adev)) -+ goto fail; -+ } -+#endif -+ -+ memset(&memconf, 0, sizeof(memconf)); -+ /* the number of STAs (STA contexts) to support -+ ** NB: was set to 1 and everything seemed to work nevertheless... */ -+ memconf.no_of_stations = cpu_to_le16(VEC_SIZE(adev->sta_list)); -+ /* specify the memory block size. Default is 256 */ -+ memconf.memory_block_size = cpu_to_le16(adev->memblocksize); -+ /* let's use 50%/50% for tx/rx (specify percentage, units of 5%) */ -+ memconf.tx_rx_memory_block_allocation = ACX111_PERCENT(50); -+ /* set the count of our queues -+ ** NB: struct acx111_ie_memoryconfig shall be modified -+ ** if we ever will switch to more than one rx and/or tx queue */ -+ memconf.count_rx_queues = 1; -+ memconf.count_tx_queues = 1; -+ /* 0 == Busmaster Indirect Memory Organization, which is what we want -+ * (using linked host descs with their allocated mem). -+ * 2 == Generic Bus Slave */ -+ /* done by memset: memconf.options = 0; */ -+ /* let's use 25% for fragmentations and 75% for frame transfers -+ * (specified in units of 5%) */ -+ memconf.fragmentation = ACX111_PERCENT(75); -+ /* Rx descriptor queue config */ -+ memconf.rx_queue1_count_descs = RX_CNT; -+ memconf.rx_queue1_type = 7; /* must be set to 7 */ -+ /* done by memset: memconf.rx_queue1_prio = 0; low prio */ -+#if defined (ACX_MEM) -+ memconf.rx_queue1_host_rx_start = cpu2acx(adev->rxhostdesc_startphy); -+#else -+ if (IS_PCI(adev)) { -+ memconf.rx_queue1_host_rx_start = cpu2acx(adev->rxhostdesc_startphy); -+ } -+#endif -+ /* Tx descriptor queue config */ -+ memconf.tx_queue1_count_descs = TX_CNT; -+ /* done by memset: memconf.tx_queue1_attributes = 0; lowest priority */ -+ -+ /* NB1: this looks wrong: (memconf,ACX1xx_IE_QUEUE_CONFIG), -+ ** (queueconf,ACX1xx_IE_MEMORY_CONFIG_OPTIONS) look swapped, eh? -+ ** But it is actually correct wrt IE numbers. -+ ** NB2: sizeof(memconf) == 28 == 0x1c but configure(ACX1xx_IE_QUEUE_CONFIG) -+ ** writes 0x20 bytes (because same IE for acx100 uses struct acx100_ie_queueconfig -+ ** which is 4 bytes larger. what a mess. TODO: clean it up) */ -+ if (OK != acx_s_configure(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG)) { -+ goto fail; -+ } -+ -+ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); -+ -+ tx_queue_start = le32_to_cpu(queueconf.tx1_queue_address); -+ rx_queue_start = le32_to_cpu(queueconf.rx1_queue_address); -+ -+ log(L_INIT, "dump queue head (from card):\n" -+ "len: %u\n" -+ "tx_memory_block_address: %X\n" -+ "rx_memory_block_address: %X\n" -+ "tx1_queue address: %X\n" -+ "rx1_queue address: %X\n", -+ le16_to_cpu(queueconf.len), -+ le32_to_cpu(queueconf.tx_memory_block_address), -+ le32_to_cpu(queueconf.rx_memory_block_address), -+ tx_queue_start, -+ rx_queue_start); -+ -+#if defined (ACX_MEM) -+ acxmem_create_desc_queues(adev, tx_queue_start, rx_queue_start); -+#else -+ if (IS_PCI(adev)) -+ acxpci_create_desc_queues(adev, tx_queue_start, rx_queue_start); -+#endif -+ -+ FN_EXIT1(OK); -+ return OK; -+fail: -+#if defined (ACX_MEM) -+ acxmem_free_desc_queues(adev); -+#else -+ if (IS_PCI(adev)) -+ acxpci_free_desc_queues(adev); -+#endif -+ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+static void -+acx_s_initialize_rx_config(acx_device_t *adev) -+{ -+ struct { -+ u16 id; -+ u16 len; -+ u16 rx_cfg1; -+ u16 rx_cfg2; -+ } ACX_PACKED cfg; -+ -+ switch (adev->mode) { -+ case ACX_MODE_OFF: -+ adev->rx_config_1 = (u16) (0 -+ /* | RX_CFG1_INCLUDE_RXBUF_HDR */ -+ /* | RX_CFG1_FILTER_SSID */ -+ /* | RX_CFG1_FILTER_BCAST */ -+ /* | RX_CFG1_RCV_MC_ADDR1 */ -+ /* | RX_CFG1_RCV_MC_ADDR0 */ -+ /* | RX_CFG1_FILTER_ALL_MULTI */ -+ /* | RX_CFG1_FILTER_BSSID */ -+ /* | RX_CFG1_FILTER_MAC */ -+ /* | RX_CFG1_RCV_PROMISCUOUS */ -+ /* | RX_CFG1_INCLUDE_FCS */ -+ /* | RX_CFG1_INCLUDE_PHY_HDR */ -+ ); -+ adev->rx_config_2 = (u16) (0 -+ /*| RX_CFG2_RCV_ASSOC_REQ */ -+ /*| RX_CFG2_RCV_AUTH_FRAMES */ -+ /*| RX_CFG2_RCV_BEACON_FRAMES */ -+ /*| RX_CFG2_RCV_CONTENTION_FREE */ -+ /*| RX_CFG2_RCV_CTRL_FRAMES */ -+ /*| RX_CFG2_RCV_DATA_FRAMES */ -+ /*| RX_CFG2_RCV_BROKEN_FRAMES */ -+ /*| RX_CFG2_RCV_MGMT_FRAMES */ -+ /*| RX_CFG2_RCV_PROBE_REQ */ -+ /*| RX_CFG2_RCV_PROBE_RESP */ -+ /*| RX_CFG2_RCV_ACK_FRAMES */ -+ /*| RX_CFG2_RCV_OTHER */ -+ ); -+ break; -+ case ACX_MODE_MONITOR: -+ adev->rx_config_1 = (u16) (0 -+ /* | RX_CFG1_INCLUDE_RXBUF_HDR */ -+ /* | RX_CFG1_FILTER_SSID */ -+ /* | RX_CFG1_FILTER_BCAST */ -+ /* | RX_CFG1_RCV_MC_ADDR1 */ -+ /* | RX_CFG1_RCV_MC_ADDR0 */ -+ /* | RX_CFG1_FILTER_ALL_MULTI */ -+ /* | RX_CFG1_FILTER_BSSID */ -+ /* | RX_CFG1_FILTER_MAC */ -+ | RX_CFG1_RCV_PROMISCUOUS -+ /* | RX_CFG1_INCLUDE_FCS */ -+ /* | RX_CFG1_INCLUDE_PHY_HDR */ -+ ); -+ adev->rx_config_2 = (u16) (0 -+ | RX_CFG2_RCV_ASSOC_REQ -+ | RX_CFG2_RCV_AUTH_FRAMES -+ | RX_CFG2_RCV_BEACON_FRAMES -+ | RX_CFG2_RCV_CONTENTION_FREE -+ | RX_CFG2_RCV_CTRL_FRAMES -+ | RX_CFG2_RCV_DATA_FRAMES -+ | RX_CFG2_RCV_BROKEN_FRAMES -+ | RX_CFG2_RCV_MGMT_FRAMES -+ | RX_CFG2_RCV_PROBE_REQ -+ | RX_CFG2_RCV_PROBE_RESP -+ | RX_CFG2_RCV_ACK_FRAMES -+ | RX_CFG2_RCV_OTHER -+ ); -+ break; -+ default: -+ adev->rx_config_1 = (u16) (0 -+ /* | RX_CFG1_INCLUDE_RXBUF_HDR */ -+ /* | RX_CFG1_FILTER_SSID */ -+ /* | RX_CFG1_FILTER_BCAST */ -+ /* | RX_CFG1_RCV_MC_ADDR1 */ -+ /* | RX_CFG1_RCV_MC_ADDR0 */ -+ /* | RX_CFG1_FILTER_ALL_MULTI */ -+ /* | RX_CFG1_FILTER_BSSID */ -+ | RX_CFG1_FILTER_MAC -+ /* | RX_CFG1_RCV_PROMISCUOUS */ -+ /* | RX_CFG1_INCLUDE_FCS */ -+ /* | RX_CFG1_INCLUDE_PHY_HDR */ -+ ); -+ adev->rx_config_2 = (u16) (0 -+ | RX_CFG2_RCV_ASSOC_REQ -+ | RX_CFG2_RCV_AUTH_FRAMES -+ | RX_CFG2_RCV_BEACON_FRAMES -+ | RX_CFG2_RCV_CONTENTION_FREE -+ | RX_CFG2_RCV_CTRL_FRAMES -+ | RX_CFG2_RCV_DATA_FRAMES -+ /*| RX_CFG2_RCV_BROKEN_FRAMES */ -+ | RX_CFG2_RCV_MGMT_FRAMES -+ | RX_CFG2_RCV_PROBE_REQ -+ | RX_CFG2_RCV_PROBE_RESP -+ /*| RX_CFG2_RCV_ACK_FRAMES */ -+ | RX_CFG2_RCV_OTHER -+ ); -+ break; -+ } -+ adev->rx_config_1 |= RX_CFG1_INCLUDE_RXBUF_HDR; -+ -+ if ((adev->rx_config_1 & RX_CFG1_INCLUDE_PHY_HDR) -+ || (adev->firmware_numver >= 0x02000000)) -+ adev->phy_header_len = IS_ACX111(adev) ? 8 : 4; -+ else -+ adev->phy_header_len = 0; -+ -+ log(L_INIT, "setting RXconfig to %04X:%04X\n", -+ adev->rx_config_1, adev->rx_config_2); -+ cfg.rx_cfg1 = cpu_to_le16(adev->rx_config_1); -+ cfg.rx_cfg2 = cpu_to_le16(adev->rx_config_2); -+ acx_s_configure(adev, &cfg, ACX1xx_IE_RXCONFIG); -+} -+ -+ -+/*********************************************************************** -+** acx_s_set_defaults -+*/ -+void -+acx_s_set_defaults(acx_device_t *adev) -+{ -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ /* do it before getting settings, prevent bogus channel 0 warning */ -+ adev->channel = 1; -+ -+ /* query some settings from the card. -+ * NOTE: for some settings, e.g. CCA and ED (ACX100!), an initial -+ * query is REQUIRED, otherwise the card won't work correctly! */ -+ adev->get_mask = GETSET_ANTENNA|GETSET_SENSITIVITY|GETSET_STATION_ID|GETSET_REG_DOMAIN; -+ /* Only ACX100 supports ED and CCA */ -+ if (IS_ACX100(adev)) -+ adev->get_mask |= GETSET_CCA|GETSET_ED_THRESH; -+ -+ acx_s_update_card_settings(adev); -+ -+ acx_lock(adev, flags); -+ -+ /* set our global interrupt mask */ -+#if defined (ACX_MEM) -+ acxmem_set_interrupt_mask(adev); -+#else -+ if (IS_PCI(adev)) -+ acxpci_set_interrupt_mask(adev); -+#endif -+ -+ adev->led_power = 1; /* LED is active on startup */ -+ adev->brange_max_quality = 60; /* LED blink max quality is 60 */ -+ adev->brange_time_last_state_change = jiffies; -+ -+ /* copy the MAC address we just got from the card -+ * into our MAC address used during current 802.11 session */ -+ MAC_COPY(adev->dev_addr, adev->ndev->dev_addr); -+ MAC_BCAST(adev->ap); -+ -+ adev->essid_len = -+ snprintf(adev->essid, sizeof(adev->essid), "STA%02X%02X%02X", -+ adev->dev_addr[3], adev->dev_addr[4], adev->dev_addr[5]); -+ adev->essid_active = 1; -+ -+ /* we have a nick field to waste, so why not abuse it -+ * to announce the driver version? ;-) */ -+ strncpy(adev->nick, "acx " ACX_RELEASE, IW_ESSID_MAX_SIZE); -+ -+#if defined (ACX_MEM) -+ adev->reg_dom_id = adev->cfgopt_domains.list[0]; -+#else -+ if (IS_PCI(adev)) { /* FIXME: this should be made to apply to USB, too! */ -+ /* first regulatory domain entry in EEPROM == default reg. domain */ -+ adev->reg_dom_id = adev->cfgopt_domains.list[0]; -+ } -+#endif -+ -+ /* 0xffff would be better, but then we won't get a "scan complete" -+ * interrupt, so our current infrastructure will fail: */ -+ adev->scan_count = 1; -+ adev->scan_mode = ACX_SCAN_OPT_ACTIVE; -+ adev->scan_duration = 100; -+ adev->scan_probe_delay = 200; -+ /* reported to break scanning: adev->scan_probe_delay = adev->cfgopt_probe_delay; */ -+ adev->scan_rate = ACX_SCAN_RATE_1; -+ -+ adev->mode = ACX_MODE_2_STA; -+ adev->auth_alg = WLAN_AUTH_ALG_OPENSYSTEM; -+ adev->listen_interval = 100; -+ adev->beacon_interval = DEFAULT_BEACON_INTERVAL; -+ adev->dtim_interval = DEFAULT_DTIM_INTERVAL; -+ -+ adev->msdu_lifetime = DEFAULT_MSDU_LIFETIME; -+ -+ adev->rts_threshold = DEFAULT_RTS_THRESHOLD; -+ adev->frag_threshold = 2346; -+ -+ /* use standard default values for retry limits */ -+ adev->short_retry = 7; /* max. retries for (short) non-RTS packets */ -+ adev->long_retry = 4; /* max. retries for long (RTS) packets */ -+ -+ adev->preamble_mode = 2; /* auto */ -+ adev->fallback_threshold = 3; -+ adev->stepup_threshold = 10; -+ adev->rate_bcast = RATE111_1; -+ adev->rate_bcast100 = RATE100_1; -+ adev->rate_basic = RATE111_1 | RATE111_2; -+ adev->rate_auto = 1; -+ if (IS_ACX111(adev)) { -+ adev->rate_oper = RATE111_ALL; -+ } else { -+ adev->rate_oper = RATE111_ACX100_COMPAT; -+ } -+ -+ /* Supported Rates element - the rates here are given in units of -+ * 500 kbit/s, plus 0x80 added. See 802.11-1999.pdf item 7.3.2.2 */ -+ acx_l_update_ratevector(adev); -+ -+ /* set some more defaults */ -+ if (IS_ACX111(adev)) { -+ /* 30mW (15dBm) is default, at least in my acx111 card: */ -+ adev->tx_level_dbm = 15; -+ } else { -+ /* don't use max. level, since it might be dangerous -+ * (e.g. WRT54G people experience -+ * excessive Tx power damage!) */ -+ adev->tx_level_dbm = 18; -+ /* -+ * Lower power for the iPaq hx4700 -+ */ -+ if (IS_MEM(adev)) { -+ adev->tx_level_dbm = 14; -+ } -+ } -+ /* adev->tx_level_auto = 1; */ -+ if (IS_ACX111(adev)) { -+ /* start with sensitivity level 1 out of 3: */ -+ adev->sensitivity = 1; -+ } -+ -+/* #define ENABLE_POWER_SAVE */ -+#ifdef ENABLE_POWER_SAVE -+ adev->ps_wakeup_cfg = PS_CFG_ENABLE | PS_CFG_WAKEUP_ALL_BEAC; -+ adev->ps_listen_interval = 1; -+ adev->ps_options = PS_OPT_ENA_ENHANCED_PS | PS_OPT_TX_PSPOLL | PS_OPT_STILL_RCV_BCASTS; -+ adev->ps_hangover_period = 30; -+ adev->ps_enhanced_transition_time = 0; -+#else -+ adev->ps_wakeup_cfg = 0; -+ adev->ps_listen_interval = 0; -+ adev->ps_options = 0; -+ adev->ps_hangover_period = 0; -+ adev->ps_enhanced_transition_time = 0; -+#endif -+ -+ /* These settings will be set in fw on ifup */ -+ adev->set_mask = 0 -+ | GETSET_RETRY -+ | SET_MSDU_LIFETIME -+ /* configure card to do rate fallback when in auto rate mode */ -+ | SET_RATE_FALLBACK -+ | SET_RXCONFIG -+ | GETSET_TXPOWER -+ /* better re-init the antenna value we got above */ -+ | GETSET_ANTENNA -+#if POWER_SAVE_80211 -+ | GETSET_POWER_80211 -+#endif -+ ; -+ -+ acx_unlock(adev, flags); -+ acx_lock_unhold(); /* hold time 844814 CPU ticks @2GHz */ -+ -+ acx_s_initialize_rx_config(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** FIXME: this should be solved in a general way for all radio types -+** by decoding the radio firmware module, -+** since it probably has some standard structure describing how to -+** set the power level of the radio module which it controls. -+** Or maybe not, since the radio module probably has a function interface -+** instead which then manages Tx level programming :-\ -+*/ -+static int -+acx111_s_set_tx_level(acx_device_t *adev, u8 level_dbm) -+{ -+ struct acx111_ie_tx_level tx_level; -+ -+ /* my acx111 card has two power levels in its configoptions (== EEPROM): -+ * 1 (30mW) [15dBm] -+ * 2 (10mW) [10dBm] -+ * For now, just assume all other acx111 cards have the same. -+ * FIXME: Ideally we would query it here, but we first need a -+ * standard way to query individual configoptions easily. -+ * Well, now we have proper cfgopt txpower variables, but this still -+ * hasn't been done yet, since it also requires dBm <-> mW conversion here... */ -+ if (level_dbm <= 12) { -+ tx_level.level = 2; /* 10 dBm */ -+ adev->tx_level_dbm = 10; -+ } else { -+ tx_level.level = 1; /* 15 dBm */ -+ adev->tx_level_dbm = 15; -+ } -+ if (level_dbm != adev->tx_level_dbm) -+ log(L_INIT, "acx111 firmware has specific " -+ "power levels only: adjusted %d dBm to %d dBm!\n", -+ level_dbm, adev->tx_level_dbm); -+ -+ return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); -+} -+ -+static int -+acx_s_set_tx_level(acx_device_t *adev, u8 level_dbm) -+{ -+ if (IS_ACX111(adev)) { -+ return acx111_s_set_tx_level(adev, level_dbm); -+ } -+#if defined (ACX_MEM) -+ return acx100mem_s_set_tx_level(adev, level_dbm); -+#else -+ if (IS_PCI(adev)) { -+ return acx100pci_s_set_tx_level(adev, level_dbm); -+ } -+#endif -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+#ifdef UNUSED -+/* Returns the current tx level (ACX111) */ -+static u8 -+acx111_s_get_tx_level(acx_device_t *adev) -+{ -+ struct acx111_ie_tx_level tx_level; -+ -+ tx_level.level = 0; -+ acx_s_interrogate(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); -+ return tx_level.level; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_l_rxmonitor -+** Called from IRQ context only -+*/ -+static void -+acx_l_rxmonitor(acx_device_t *adev, const rxbuffer_t *rxbuf) -+{ -+ wlansniffrm_t *msg; -+ struct sk_buff *skb; -+ void *datap; -+ unsigned int skb_len; -+ int payload_offset; -+ -+ FN_ENTER; -+ -+ /* we are in big luck: the acx100 doesn't modify any of the fields */ -+ /* in the 802.11 frame. just pass this packet into the PF_PACKET */ -+ /* subsystem. yeah. */ -+ payload_offset = ((u8*)acx_get_wlan_hdr(adev, rxbuf) - (u8*)rxbuf); -+ skb_len = RXBUF_BYTES_USED(rxbuf) - payload_offset; -+ -+ /* sanity check */ -+ if (unlikely(skb_len > WLAN_A4FR_MAXLEN_WEP)) { -+ printk("%s: monitor mode panic: oversized frame!\n", -+ adev->ndev->name); -+ goto end; -+ } -+ -+ if (adev->ndev->type == ARPHRD_IEEE80211_PRISM) -+ skb_len += sizeof(*msg); -+ -+ /* allocate skb */ -+ skb = dev_alloc_skb(skb_len); -+ if (unlikely(!skb)) { -+ printk("%s: no memory for skb (%u bytes)\n", -+ adev->ndev->name, skb_len); -+ goto end; -+ } -+ -+ skb_put(skb, skb_len); -+ -+ if (adev->ndev->type == ARPHRD_IEEE80211) { -+ /* when in raw 802.11 mode, just copy frame as-is */ -+ datap = skb->data; -+ } else if (adev->ndev->type == ARPHRD_IEEE80211_PRISM) { -+ /* emulate prism header */ -+ msg = (wlansniffrm_t*)skb->data; -+ datap = msg + 1; -+ -+ msg->msgcode = WLANSNIFFFRM; -+ msg->msglen = sizeof(*msg); -+ strncpy(msg->devname, adev->ndev->name, sizeof(msg->devname)-1); -+ msg->devname[sizeof(msg->devname)-1] = '\0'; -+ -+ msg->hosttime.did = WLANSNIFFFRM_hosttime; -+ msg->hosttime.status = WLANITEM_STATUS_data_ok; -+ msg->hosttime.len = 4; -+ msg->hosttime.data = jiffies; -+ -+ msg->mactime.did = WLANSNIFFFRM_mactime; -+ msg->mactime.status = WLANITEM_STATUS_data_ok; -+ msg->mactime.len = 4; -+ msg->mactime.data = rxbuf->time; -+ -+ msg->channel.did = WLANSNIFFFRM_channel; -+ msg->channel.status = WLANITEM_STATUS_data_ok; -+ msg->channel.len = 4; -+ msg->channel.data = adev->channel; -+ -+ msg->rssi.did = WLANSNIFFFRM_rssi; -+ msg->rssi.status = WLANITEM_STATUS_no_value; -+ msg->rssi.len = 4; -+ msg->rssi.data = 0; -+ -+ msg->sq.did = WLANSNIFFFRM_sq; -+ msg->sq.status = WLANITEM_STATUS_no_value; -+ msg->sq.len = 4; -+ msg->sq.data = 0; -+ -+ msg->signal.did = WLANSNIFFFRM_signal; -+ msg->signal.status = WLANITEM_STATUS_data_ok; -+ msg->signal.len = 4; -+ msg->signal.data = rxbuf->phy_snr; -+ -+ msg->noise.did = WLANSNIFFFRM_noise; -+ msg->noise.status = WLANITEM_STATUS_data_ok; -+ msg->noise.len = 4; -+ msg->noise.data = rxbuf->phy_level; -+ -+ msg->rate.did = WLANSNIFFFRM_rate; -+ msg->rate.status = WLANITEM_STATUS_data_ok; -+ msg->rate.len = 4; -+ msg->rate.data = rxbuf->phy_plcp_signal / 5; -+ -+ msg->istx.did = WLANSNIFFFRM_istx; -+ msg->istx.status = WLANITEM_STATUS_data_ok; -+ msg->istx.len = 4; -+ msg->istx.data = 0; /* tx=0: it's not a tx packet */ -+ -+ skb_len -= sizeof(*msg); -+ -+ msg->frmlen.did = WLANSNIFFFRM_signal; -+ msg->frmlen.status = WLANITEM_STATUS_data_ok; -+ msg->frmlen.len = 4; -+ msg->frmlen.data = skb_len; -+ } else { -+ printk("acx: unsupported netdev type %d!\n", adev->ndev->type); -+ dev_kfree_skb(skb); -+ return; -+ } -+ -+ /* sanity check (keep it here) */ -+ if (unlikely((int)skb_len < 0)) { -+ printk("acx: skb_len=%d. Driver bug, please report\n", (int)skb_len); -+ dev_kfree_skb(skb); -+ return; -+ } -+ memcpy(datap, ((unsigned char*)rxbuf)+payload_offset, skb_len); -+ -+ skb->dev = adev->ndev; -+ skb->dev->last_rx = jiffies; -+ -+ skb_reset_mac_header(skb); -+ skb->ip_summed = CHECKSUM_NONE; -+ skb->pkt_type = PACKET_OTHERHOST; -+ skb->protocol = htons(ETH_P_80211_RAW); -+ netif_rx(skb); -+ -+ adev->stats.rx_packets++; -+ adev->stats.rx_bytes += skb->len; -+ -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_rx_ieee802_11_frame -+** -+** Called from IRQ context only -+*/ -+ -+/* All these contortions are for saner dup logging -+** -+** We want: (a) to know about excessive dups -+** (b) to not spam kernel log about occasional dups -+** -+** 1/64 threshold was chosen by running "ping -A" -+** It gave "rx: 59 DUPs in 2878 packets" only with 4 parallel -+** "ping -A" streams running. */ -+/* 2005-10-11: bumped up to 1/8 -+** subtract a $smallint from dup_count in order to -+** avoid "2 DUPs in 19 packets" messages */ -+static inline int -+acx_l_handle_dup(acx_device_t *adev, u16 seq) -+{ -+ if (adev->dup_count) { -+ adev->nondup_count++; -+ if (time_after(jiffies, adev->dup_msg_expiry)) { -+ /* Log only if more than 1 dup in 64 packets */ -+ if (adev->nondup_count/8 < adev->dup_count-5) { -+ printk(KERN_INFO "%s: rx: %d DUPs in " -+ "%d packets received in 10 secs\n", -+ adev->ndev->name, -+ adev->dup_count, -+ adev->nondup_count); -+ } -+ adev->dup_count = 0; -+ adev->nondup_count = 0; -+ } -+ } -+ if (unlikely(seq == adev->last_seq_ctrl)) { -+ if (!adev->dup_count++) -+ adev->dup_msg_expiry = jiffies + 10*HZ; -+ adev->stats.rx_errors++; -+ return 1; /* a dup */ -+ } -+ adev->last_seq_ctrl = seq; -+ return 0; -+} -+ -+static int -+acx_l_rx_ieee802_11_frame(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ unsigned int ftype, fstype; -+ const wlan_hdr_t *hdr; -+ int result = NOT_OK; -+ -+ FN_ENTER; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ -+ /* see IEEE 802.11-1999.pdf chapter 7 "MAC frame formats" */ -+ if (unlikely((hdr->fc & WF_FC_PVERi) != 0)) { -+ printk_ratelimited(KERN_INFO "rx: unsupported 802.11 protocol\n"); -+ goto end; -+ } -+ -+ ftype = hdr->fc & WF_FC_FTYPEi; -+ fstype = hdr->fc & WF_FC_FSTYPEi; -+ -+ switch (ftype) { -+ /* check data frames first, for speed */ -+ case WF_FTYPE_DATAi: -+ switch (fstype) { -+ case WF_FSTYPE_DATAONLYi: -+ if (acx_l_handle_dup(adev, hdr->seq)) -+ break; /* a dup, simply discard it */ -+ -+ /* TODO: -+ if (WF_FC_FROMTODSi == (hdr->fc & WF_FC_FROMTODSi)) { -+ result = acx_l_process_data_frame_wds(adev, rxbuf); -+ break; -+ } -+ */ -+ -+ switch (adev->mode) { -+ case ACX_MODE_3_AP: -+ result = acx_l_process_data_frame_master(adev, rxbuf); -+ break; -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ result = acx_l_process_data_frame_client(adev, rxbuf); -+ break; -+ } -+ case WF_FSTYPE_DATA_CFACKi: -+ case WF_FSTYPE_DATA_CFPOLLi: -+ case WF_FSTYPE_DATA_CFACK_CFPOLLi: -+ case WF_FSTYPE_CFPOLLi: -+ case WF_FSTYPE_CFACK_CFPOLLi: -+ /* see above. -+ acx_process_class_frame(adev, rxbuf, 3); */ -+ break; -+ case WF_FSTYPE_NULLi: -+ /* acx_l_process_NULL_frame(adev, rxbuf, 3); */ -+ break; -+ /* FIXME: same here, see above */ -+ case WF_FSTYPE_CFACKi: -+ default: -+ break; -+ } -+ break; -+ case WF_FTYPE_MGMTi: -+ result = acx_l_process_mgmt_frame(adev, rxbuf); -+ break; -+ case WF_FTYPE_CTLi: -+ if (fstype == WF_FSTYPE_PSPOLLi) -+ result = OK; -+ /* this call is irrelevant, since -+ * acx_process_class_frame is a stub, so return -+ * immediately instead. -+ * return acx_process_class_frame(adev, rxbuf, 3); */ -+ break; -+ default: -+ break; -+ } -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_rxbuf -+** -+** NB: used by USB code also -+*/ -+void -+acx_l_process_rxbuf(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ struct wlan_hdr *hdr; -+ unsigned int qual; -+ int buf_len; -+ u16 fc; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ fc = le16_to_cpu(hdr->fc); -+ /* length of frame from control field to first byte of FCS */ -+ buf_len = RXBUF_BYTES_RCVD(adev, rxbuf); -+ -+ if ( ((WF_FC_FSTYPE & fc) != WF_FSTYPE_BEACON) -+ || (acx_debug & L_XFER_BEACON) -+ ) { -+ log(L_XFER|L_DATA, "rx: %s " -+ "time:%u len:%u signal:%u SNR:%u macstat:%02X " -+ "phystat:%02X phyrate:%u status:%u\n", -+ acx_get_packet_type_string(fc), -+ le32_to_cpu(rxbuf->time), -+ buf_len, -+ acx_signal_to_winlevel(rxbuf->phy_level), -+ acx_signal_to_winlevel(rxbuf->phy_snr), -+ rxbuf->mac_status, -+ rxbuf->phy_stat_baseband, -+ rxbuf->phy_plcp_signal, -+ adev->status); -+ } -+ -+ if (unlikely(acx_debug & L_DATA)) { -+ printk("rx: 802.11 buf[%u]: ", buf_len); -+ acx_dump_bytes(hdr, buf_len); -+ } -+ -+ /* FIXME: should check for Rx errors (rxbuf->mac_status? -+ * discard broken packets - but NOT for monitor!) -+ * and update Rx packet statistics here */ -+ -+ if (unlikely(adev->mode == ACX_MODE_MONITOR)) { -+ acx_l_rxmonitor(adev, rxbuf); -+ } else if (likely(buf_len >= WLAN_HDR_A3_LEN)) { -+ acx_l_rx_ieee802_11_frame(adev, rxbuf); -+ } else { -+ log(L_DEBUG|L_XFER|L_DATA, -+ "rx: NOT receiving packet (%s): " -+ "size too small (%u)\n", -+ acx_get_packet_type_string(fc), -+ buf_len); -+ } -+ -+ /* Now check Rx quality level, AFTER processing packet. -+ * I tried to figure out how to map these levels to dBm -+ * values, but for the life of me I really didn't -+ * manage to get it. Either these values are not meant to -+ * be expressed in dBm, or it's some pretty complicated -+ * calculation. */ -+ -+#ifdef FROM_SCAN_SOURCE_ONLY -+ /* only consider packets originating from the MAC -+ * address of the device that's managing our BSSID. -+ * Disable it for now, since it removes information (levels -+ * from different peers) and slows the Rx path. */ -+ if (adev->ap_client -+ && mac_is_equal(hdr->a2, adev->ap_client->address)) { -+#endif -+ adev->wstats.qual.level = acx_signal_to_winlevel(rxbuf->phy_level); -+ adev->wstats.qual.noise = acx_signal_to_winlevel(rxbuf->phy_snr); -+#ifndef OLD_QUALITY -+ qual = acx_signal_determine_quality(adev->wstats.qual.level, -+ adev->wstats.qual.noise); -+#else -+ qual = (adev->wstats.qual.noise <= 100) ? -+ 100 - adev->wstats.qual.noise : 0; -+#endif -+ adev->wstats.qual.qual = qual; -+ adev->wstats.qual.updated = 7; /* all 3 indicators updated */ -+#ifdef FROM_SCAN_SOURCE_ONLY -+ } -+#endif -+} -+ -+ -+/*********************************************************************** -+** acx_l_handle_txrate_auto -+** -+** Theory of operation: -+** client->rate_cap is a bitmask of rates client is capable of. -+** client->rate_cfg is a bitmask of allowed (configured) rates. -+** It is set as a result of iwconfig rate N [auto] -+** or iwpriv set_rates "N,N,N N,N,N" commands. -+** It can be fixed (e.g. 0x0080 == 18Mbit only), -+** auto (0x00ff == 18Mbit or any lower value), -+** and code handles any bitmask (0x1081 == try 54Mbit,18Mbit,1Mbit _only_). -+** -+** client->rate_cur is a value for rate111 field in tx descriptor. -+** It is always set to txrate_cfg sans zero or more most significant -+** bits. This routine handles selection of new rate_cur value depending on -+** outcome of last tx event. -+** -+** client->rate_100 is a precalculated rate value for acx100 -+** (we can do without it, but will need to calculate it on each tx). -+** -+** You cannot configure mixed usage of 5.5 and/or 11Mbit rate -+** with PBCC and CCK modulation. Either both at CCK or both at PBCC. -+** In theory you can implement it, but so far it is considered not worth doing. -+** -+** 22Mbit, of course, is PBCC always. */ -+ -+/* maps acx100 tx descr rate field to acx111 one */ -+static u16 -+rate100to111(u8 r) -+{ -+ switch (r) { -+ case RATE100_1: return RATE111_1; -+ case RATE100_2: return RATE111_2; -+ case RATE100_5: -+ case (RATE100_5 | RATE100_PBCC511): return RATE111_5; -+ case RATE100_11: -+ case (RATE100_11 | RATE100_PBCC511): return RATE111_11; -+ case RATE100_22: return RATE111_22; -+ default: -+ printk("acx: unexpected acx100 txrate: %u! " -+ "Please report\n", r); -+ return RATE111_1; -+ } -+} -+ -+ -+void -+acx_l_handle_txrate_auto(acx_device_t *adev, struct client *txc, -+ u16 cur, u8 rate100, u16 rate111, -+ u8 error, int pkts_to_ignore) -+{ -+ u16 sent_rate; -+ int slower_rate_was_used; -+ -+ /* vda: hmm. current code will do this: -+ ** 1. send packets at 11 Mbit, stepup++ -+ ** 2. will try to send at 22Mbit. hardware will see no ACK, -+ ** retries at 11Mbit, success. code notes that used rate -+ ** is lower. stepup = 0, fallback++ -+ ** 3. repeat step 2 fallback_count times. Fall back to -+ ** 11Mbit. go to step 1. -+ ** If stepup_count is large (say, 16) and fallback_count -+ ** is small (3), this wouldn't be too bad wrt throughput */ -+ -+ if (unlikely(!cur)) { -+ printk("acx: BUG! ratemask is empty\n"); -+ return; /* or else we may lock up the box */ -+ } -+ -+ /* do some preparations, i.e. calculate the one rate that was -+ * used to send this packet */ -+ if (IS_ACX111(adev)) { -+ sent_rate = 1 << highest_bit(rate111 & RATE111_ALL); -+ } else { -+ sent_rate = rate100to111(rate100); -+ } -+ /* sent_rate has only one bit set now, corresponding to tx rate -+ * which was used by hardware to tx this particular packet */ -+ -+ /* now do the actual auto rate management */ -+ log(L_XFER, "tx: %sclient=%p/"MACSTR" used=%04X cur=%04X cfg=%04X " -+ "__=%u/%u ^^=%u/%u\n", -+ (txc->ignore_count > 0) ? "[IGN] " : "", -+ txc, MAC(txc->address), sent_rate, cur, txc->rate_cfg, -+ txc->fallback_count, adev->fallback_threshold, -+ txc->stepup_count, adev->stepup_threshold -+ ); -+ -+ /* we need to ignore old packets already in the tx queue since -+ * they use older rate bytes configured before our last rate change, -+ * otherwise our mechanism will get confused by interpreting old data. -+ * Do it after logging above */ -+ if (txc->ignore_count) { -+ txc->ignore_count--; -+ return; -+ } -+ -+ /* true only if the only nonzero bit in sent_rate is -+ ** less significant than highest nonzero bit in cur */ -+ slower_rate_was_used = ( cur > ((sent_rate<<1)-1) ); -+ -+ if (slower_rate_was_used || error) { -+ txc->stepup_count = 0; -+ if (++txc->fallback_count <= adev->fallback_threshold) -+ return; -+ txc->fallback_count = 0; -+ -+ /* clear highest 1 bit in cur */ -+ sent_rate = RATE111_54; -+ while (!(cur & sent_rate)) sent_rate >>= 1; -+ CLEAR_BIT(cur, sent_rate); -+ if (!cur) /* we can't disable all rates! */ -+ cur = sent_rate; -+ log(L_XFER, "tx: falling back to ratemask %04X\n", cur); -+ -+ } else { /* there was neither lower rate nor error */ -+ txc->fallback_count = 0; -+ if (++txc->stepup_count <= adev->stepup_threshold) -+ return; -+ txc->stepup_count = 0; -+ -+ /* Sanitize. Sort of not needed, but I dont trust hw that much... -+ ** what if it can report bogus tx rates sometimes? */ -+ while (!(cur & sent_rate)) sent_rate >>= 1; -+ -+ /* try to find a higher sent_rate that isn't yet in our -+ * current set, but is an allowed cfg */ -+ while (1) { -+ sent_rate <<= 1; -+ if (sent_rate > txc->rate_cfg) -+ /* no higher rates allowed by config */ -+ return; -+ if (!(cur & sent_rate) && (txc->rate_cfg & sent_rate)) -+ /* found */ -+ break; -+ /* not found, try higher one */ -+ } -+ SET_BIT(cur, sent_rate); -+ log(L_XFER, "tx: stepping up to ratemask %04X\n", cur); -+ } -+ -+ txc->rate_cur = cur; -+ txc->ignore_count = pkts_to_ignore; -+ /* calculate acx100 style rate byte if needed */ -+ if (IS_ACX100(adev)) { -+ txc->rate_100 = acx_bitpos2rate100[highest_bit(cur)]; -+ } -+} -+ -+ -+/*********************************************************************** -+** acx_i_start_xmit -+** -+** Called by network core. Can be called outside of process context. -+*/ -+int -+acx_i_start_xmit(struct sk_buff *skb, struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ tx_t *tx; -+ void *txbuf; -+ unsigned long flags; -+ int txresult = NOT_OK; -+ int len; -+ -+ FN_ENTER; -+ -+ if (unlikely(!skb)) { -+ /* indicate success */ -+ txresult = OK; -+ goto end_no_unlock; -+ } -+ if (unlikely(!adev)) { -+ goto end_no_unlock; -+ } -+ -+ acx_lock(adev, flags); -+ -+ if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) { -+ goto end; -+ } -+ if (unlikely(adev->mode == ACX_MODE_OFF)) { -+ goto end; -+ } -+ if (unlikely(acx_queue_stopped(ndev))) { -+ log(L_DEBUG, "%s: called when queue stopped\n", __func__); -+ goto end; -+ } -+ if (unlikely(ACX_STATUS_4_ASSOCIATED != adev->status)) { -+ log(L_XFER, "trying to xmit, but not associated yet: " -+ "aborting...\n"); -+ /* silently drop the packet, since we're not connected yet */ -+ txresult = OK; -+ /* ...but indicate an error nevertheless */ -+ adev->stats.tx_errors++; -+ goto end; -+ } -+ -+ tx = acx_l_alloc_tx(adev); -+ if (unlikely(!tx)) { -+#ifndef ACX_MEM -+ /* -+ * generic slave interface has to make do with the tiny amount, around -+ * 7k, of transmit buffer space on the ACX itself. It is likely this will -+ * frequently be full. -+ */ -+ printk_ratelimited("%s: start_xmit: txdesc ring is full, " -+ "dropping tx\n", ndev->name); -+#endif -+ txresult = NOT_OK; -+ goto end; -+ } -+ -+ txbuf = acx_l_get_txbuf(adev, tx); -+ if (unlikely(!txbuf)) { -+ /* Card was removed */ -+ txresult = NOT_OK; -+ acx_l_dealloc_tx(adev, tx); -+ goto end; -+ } -+ len = acx_ether_to_txbuf(adev, txbuf, skb); -+ if (unlikely(len < 0)) { -+ /* Error in packet conversion */ -+ txresult = NOT_OK; -+ acx_l_dealloc_tx(adev, tx); -+ goto end; -+ } -+ acx_l_tx_data(adev, tx, len); -+ ndev->trans_start = jiffies; -+ -+ txresult = OK; -+ adev->stats.tx_packets++; -+ adev->stats.tx_bytes += skb->len; -+ -+end: -+ acx_unlock(adev, flags); -+ -+end_no_unlock: -+ if ((txresult == OK) && skb) -+ dev_kfree_skb_any(skb); -+ -+ FN_EXIT1(txresult); -+ return txresult; -+} -+ -+ -+/*********************************************************************** -+** acx_l_update_ratevector -+** -+** Updates adev->rate_supported[_len] according to rate_{basic,oper} -+*/ -+const u8 -+acx_bitpos2ratebyte[] = { -+ DOT11RATEBYTE_1, -+ DOT11RATEBYTE_2, -+ DOT11RATEBYTE_5_5, -+ DOT11RATEBYTE_6_G, -+ DOT11RATEBYTE_9_G, -+ DOT11RATEBYTE_11, -+ DOT11RATEBYTE_12_G, -+ DOT11RATEBYTE_18_G, -+ DOT11RATEBYTE_22, -+ DOT11RATEBYTE_24_G, -+ DOT11RATEBYTE_36_G, -+ DOT11RATEBYTE_48_G, -+ DOT11RATEBYTE_54_G, -+}; -+ -+void -+acx_l_update_ratevector(acx_device_t *adev) -+{ -+ u16 bcfg = adev->rate_basic; -+ u16 ocfg = adev->rate_oper; -+ u8 *supp = adev->rate_supported; -+ const u8 *dot11 = acx_bitpos2ratebyte; -+ -+ FN_ENTER; -+ -+ while (ocfg) { -+ if (ocfg & 1) { -+ *supp = *dot11; -+ if (bcfg & 1) { -+ *supp |= 0x80; -+ } -+ supp++; -+ } -+ dot11++; -+ ocfg >>= 1; -+ bcfg >>= 1; -+ } -+ adev->rate_supported_len = supp - adev->rate_supported; -+ if (acx_debug & L_ASSOC) { -+ printk("new ratevector: "); -+ acx_dump_bytes(adev->rate_supported, adev->rate_supported_len); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_init -+*/ -+static void -+acx_l_sta_list_init(acx_device_t *adev) -+{ -+ FN_ENTER; -+ memset(adev->sta_hash_tab, 0, sizeof(adev->sta_hash_tab)); -+ memset(adev->sta_list, 0, sizeof(adev->sta_list)); -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_get_from_hash -+*/ -+static inline client_t* -+acx_l_sta_list_get_from_hash(acx_device_t *adev, const u8 *address) -+{ -+ return adev->sta_hash_tab[address[5] % VEC_SIZE(adev->sta_hash_tab)]; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_get -+*/ -+client_t* -+acx_l_sta_list_get(acx_device_t *adev, const u8 *address) -+{ -+ client_t *client; -+ FN_ENTER; -+ client = acx_l_sta_list_get_from_hash(adev, address); -+ while (client) { -+ if (mac_is_equal(address, client->address)) { -+ client->mtime = jiffies; -+ break; -+ } -+ client = client->next; -+ } -+ FN_EXIT0; -+ return client; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_del -+*/ -+void -+acx_l_sta_list_del(acx_device_t *adev, client_t *victim) -+{ -+ client_t *client, *next; -+ -+ client = acx_l_sta_list_get_from_hash(adev, victim->address); -+ next = client; -+ /* tricky. next = client on first iteration only, -+ ** on all other iters next = client->next */ -+ while (next) { -+ if (next == victim) { -+ client->next = victim->next; -+ /* Overkill */ -+ memset(victim, 0, sizeof(*victim)); -+ break; -+ } -+ client = next; -+ next = client->next; -+ } -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_alloc -+** -+** Never fails - will evict oldest client if needed -+*/ -+static client_t* -+acx_l_sta_list_alloc(acx_device_t *adev) -+{ -+ int i; -+ unsigned long age, oldest_age; -+ client_t *client, *oldest; -+ -+ FN_ENTER; -+ -+ oldest = &adev->sta_list[0]; -+ oldest_age = 0; -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ client = &adev->sta_list[i]; -+ -+ if (!client->used) { -+ goto found; -+ } else { -+ age = jiffies - client->mtime; -+ if (oldest_age < age) { -+ oldest_age = age; -+ oldest = client; -+ } -+ } -+ } -+ acx_l_sta_list_del(adev, oldest); -+ client = oldest; -+found: -+ memset(client, 0, sizeof(*client)); -+ FN_EXIT0; -+ return client; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_add -+** -+** Never fails - will evict oldest client if needed -+*/ -+/* In case we will reimplement it differently... */ -+#define STA_LIST_ADD_CAN_FAIL 0 -+ -+static client_t* -+acx_l_sta_list_add(acx_device_t *adev, const u8 *address) -+{ -+ client_t *client; -+ int index; -+ -+ FN_ENTER; -+ -+ client = acx_l_sta_list_alloc(adev); -+ -+ client->mtime = jiffies; -+ MAC_COPY(client->address, address); -+ client->used = CLIENT_EXIST_1; -+ client->auth_alg = WLAN_AUTH_ALG_SHAREDKEY; -+ client->auth_step = 1; -+ /* give some tentative peer rate values -+ ** (needed because peer may do auth without probing us first, -+ ** thus we'll have no idea of peer's ratevector yet). -+ ** Will be overwritten by scanning or assoc code */ -+ client->rate_cap = adev->rate_basic; -+ client->rate_cfg = adev->rate_basic; -+ client->rate_cur = 1 << lowest_bit(adev->rate_basic); -+ -+ index = address[5] % VEC_SIZE(adev->sta_hash_tab); -+ client->next = adev->sta_hash_tab[index]; -+ adev->sta_hash_tab[index] = client; -+ -+ acxlog_mac(L_ASSOC, "sta_list_add: sta=", address, "\n"); -+ -+ FN_EXIT0; -+ return client; -+} -+ -+ -+/*********************************************************************** -+** acx_l_sta_list_get_or_add -+** -+** Never fails - will evict oldest client if needed -+*/ -+static client_t* -+acx_l_sta_list_get_or_add(acx_device_t *adev, const u8 *address) -+{ -+ client_t *client = acx_l_sta_list_get(adev, address); -+ if (!client) -+ client = acx_l_sta_list_add(adev, address); -+ return client; -+} -+ -+ -+/*********************************************************************** -+** acx_set_status -+** -+** This function is called in many atomic regions, must not sleep -+** -+** This function does not need locking UNLESS you call it -+** as acx_set_status(ACX_STATUS_4_ASSOCIATED), bacause this can -+** wake queue. This can race with stop_queue elsewhere. -+** See acx_stop_queue comment. */ -+void -+acx_set_status(acx_device_t *adev, u16 new_status) -+{ -+#define QUEUE_OPEN_AFTER_ASSOC 1 /* this really seems to be needed now */ -+ u16 old_status = adev->status; -+ -+ FN_ENTER; -+ -+ log(L_ASSOC, "%s(%d):%s\n", -+ __func__, new_status, acx_get_status_name(new_status)); -+ -+ /* wireless_send_event never sleeps */ -+ if (ACX_STATUS_4_ASSOCIATED == new_status) { -+ union iwreq_data wrqu; -+ -+ wrqu.data.length = 0; -+ wrqu.data.flags = 0; -+ wireless_send_event(adev->ndev, SIOCGIWSCAN, &wrqu, NULL); -+ -+ wrqu.data.length = 0; -+ wrqu.data.flags = 0; -+ MAC_COPY(wrqu.ap_addr.sa_data, adev->bssid); -+ wrqu.ap_addr.sa_family = ARPHRD_ETHER; -+ wireless_send_event(adev->ndev, SIOCGIWAP, &wrqu, NULL); -+ } else { -+ union iwreq_data wrqu; -+ -+ /* send event with empty BSSID to indicate we're not associated */ -+ MAC_ZERO(wrqu.ap_addr.sa_data); -+ wrqu.ap_addr.sa_family = ARPHRD_ETHER; -+ wireless_send_event(adev->ndev, SIOCGIWAP, &wrqu, NULL); -+ } -+ -+ adev->status = new_status; -+ -+ switch (new_status) { -+ case ACX_STATUS_1_SCANNING: -+ adev->scan_retries = 0; -+ /* 1.0 s initial scan time */ -+ acx_set_timer(adev, 1000000); -+ break; -+ case ACX_STATUS_2_WAIT_AUTH: -+ case ACX_STATUS_3_AUTHENTICATED: -+ adev->auth_or_assoc_retries = 0; -+ acx_set_timer(adev, 1500000); /* 1.5 s */ -+ break; -+ } -+ -+#if QUEUE_OPEN_AFTER_ASSOC -+ if (new_status == ACX_STATUS_4_ASSOCIATED) { -+ if (old_status < ACX_STATUS_4_ASSOCIATED) { -+ /* ah, we're newly associated now, -+ * so let's indicate carrier */ -+ acx_carrier_on(adev->ndev, "after association"); -+ acx_wake_queue(adev->ndev, "after association"); -+ } -+ } else { -+ /* not associated any more, so let's kill carrier */ -+ if (old_status >= ACX_STATUS_4_ASSOCIATED) { -+ acx_carrier_off(adev->ndev, "after losing association"); -+ acx_stop_queue(adev->ndev, "after losing association"); -+ } -+ } -+#endif -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_i_timer -+** -+** Fires up periodically. Used to kick scan/auth/assoc if something goes wrong -+*/ -+void -+acx_i_timer(unsigned long address) -+{ -+ unsigned long flags; -+ acx_device_t *adev = (acx_device_t*)address; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ log(L_DEBUG|L_ASSOC, "%s: adev->status=%d (%s)\n", -+ __func__, adev->status, acx_get_status_name(adev->status)); -+ -+ switch (adev->status) { -+ case ACX_STATUS_1_SCANNING: -+ /* was set to 0 by set_status() */ -+ if (++adev->scan_retries < 7) { -+ acx_set_timer(adev, 1000000); -+ /* used to interrogate for scan status. -+ ** We rely on SCAN_COMPLETE IRQ instead */ -+ log(L_ASSOC, "continuing scan (%d sec)\n", -+ adev->scan_retries); -+ } else { -+ log(L_ASSOC, "stopping scan\n"); -+ /* send stop_scan cmd when we leave the interrupt context, -+ * and make a decision what to do next (COMPLETE_SCAN) */ -+ acx_schedule_task(adev, -+ ACX_AFTER_IRQ_CMD_STOP_SCAN + ACX_AFTER_IRQ_COMPLETE_SCAN); -+ } -+ break; -+ case ACX_STATUS_2_WAIT_AUTH: -+ /* was set to 0 by set_status() */ -+ if (++adev->auth_or_assoc_retries < 10) { -+ log(L_ASSOC, "resend authen1 request (attempt %d)\n", -+ adev->auth_or_assoc_retries + 1); -+ acx_l_transmit_authen1(adev); -+ } else { -+ /* time exceeded: fall back to scanning mode */ -+ log(L_ASSOC, -+ "authen1 request reply timeout, giving up\n"); -+ /* we are a STA, need to find AP anyhow */ -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); -+ acx_schedule_task(adev, ACX_AFTER_IRQ_RESTART_SCAN); -+ } -+ /* used to be 1500000, but some other driver uses 2.5s */ -+ acx_set_timer(adev, 2500000); -+ break; -+ case ACX_STATUS_3_AUTHENTICATED: -+ /* was set to 0 by set_status() */ -+ if (++adev->auth_or_assoc_retries < 10) { -+ log(L_ASSOC, "resend assoc request (attempt %d)\n", -+ adev->auth_or_assoc_retries + 1); -+ acx_l_transmit_assoc_req(adev); -+ } else { -+ /* time exceeded: give up */ -+ log(L_ASSOC, -+ "association request reply timeout, giving up\n"); -+ /* we are a STA, need to find AP anyhow */ -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); -+ acx_schedule_task(adev, ACX_AFTER_IRQ_RESTART_SCAN); -+ } -+ acx_set_timer(adev, 2500000); /* see above */ -+ break; -+ case ACX_STATUS_4_ASSOCIATED: -+ default: -+ break; -+ } -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_set_timer -+** -+** Sets the 802.11 state management timer's timeout. -+*/ -+void -+acx_set_timer(acx_device_t *adev, int timeout_us) -+{ -+ FN_ENTER; -+ -+ log(L_DEBUG|L_IRQ, "%s(%u ms)\n", __func__, timeout_us/1000); -+ if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { -+ printk("attempt to set the timer " -+ "when the card interface is not up!\n"); -+ goto end; -+ } -+ -+ /* first check if the timer was already initialized, THEN modify it */ -+ if (adev->mgmt_timer.function) { -+ mod_timer(&adev->mgmt_timer, -+ jiffies + (timeout_us * HZ / 1000000)); -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_assocresp -+** -+** We are an AP here -+*/ -+static const u8 -+dot11ratebyte[] = { -+ DOT11RATEBYTE_1, -+ DOT11RATEBYTE_2, -+ DOT11RATEBYTE_5_5, -+ DOT11RATEBYTE_6_G, -+ DOT11RATEBYTE_9_G, -+ DOT11RATEBYTE_11, -+ DOT11RATEBYTE_12_G, -+ DOT11RATEBYTE_18_G, -+ DOT11RATEBYTE_22, -+ DOT11RATEBYTE_24_G, -+ DOT11RATEBYTE_36_G, -+ DOT11RATEBYTE_48_G, -+ DOT11RATEBYTE_54_G, -+}; -+ -+static inline int -+find_pos(const u8 *p, int size, u8 v) -+{ -+ int i; -+ for (i = 0; i < size; i++) -+ if (p[i] == v) -+ return i; -+ /* printk a message about strange byte? */ -+ return 0; -+} -+ -+static void -+add_bits_to_ratemasks(u8* ratevec, int len, u16* brate, u16* orate) -+{ -+ while (len--) { -+ int n = 1 << find_pos(dot11ratebyte, -+ sizeof(dot11ratebyte), *ratevec & 0x7f); -+ if (*ratevec & 0x80) -+ *brate |= n; -+ *orate |= n; -+ ratevec++; -+ } -+} -+ -+static int -+acx_l_transmit_assocresp(acx_device_t *adev, const wlan_fr_assocreq_t *req) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct assocresp_frame_body *body; -+ u8 *p; -+ const u8 *da; -+ /* const u8 *sa; */ -+ const u8 *bssid; -+ client_t *clt; -+ -+ FN_ENTER; -+ -+ /* sa = req->hdr->a1; */ -+ da = req->hdr->a2; -+ bssid = req->hdr->a3; -+ -+ clt = acx_l_sta_list_get(adev, da); -+ if (!clt) -+ goto ok; -+ -+ /* Assoc without auth is a big no-no */ -+ /* Let's be liberal: if already assoc'ed STA sends assoc req again, -+ ** we won't be rude */ -+ if (clt->used != CLIENT_AUTHENTICATED_2 -+ && clt->used != CLIENT_ASSOCIATED_3) { -+ acx_l_transmit_deauthen(adev, da, WLAN_MGMT_REASON_CLASS2_NONAUTH); -+ goto bad; -+ } -+ -+ clt->used = CLIENT_ASSOCIATED_3; -+ -+ if (clt->aid == 0) -+ clt->aid = ++adev->aid; -+ clt->cap_info = ieee2host16(*(req->cap_info)); -+ -+ /* We cheat here a bit. We don't really care which rates are flagged -+ ** as basic by the client, so we stuff them in single ratemask */ -+ clt->rate_cap = 0; -+ if (req->supp_rates) -+ add_bits_to_ratemasks(req->supp_rates->rates, -+ req->supp_rates->len, &clt->rate_cap, &clt->rate_cap); -+ if (req->ext_rates) -+ add_bits_to_ratemasks(req->ext_rates->rates, -+ req->ext_rates->len, &clt->rate_cap, &clt->rate_cap); -+ /* We can check that client supports all basic rates, -+ ** and deny assoc if not. But let's be liberal, right? ;) */ -+ clt->rate_cfg = clt->rate_cap & adev->rate_oper; -+ if (!clt->rate_cfg) clt->rate_cfg = 1 << lowest_bit(adev->rate_oper); -+ clt->rate_cur = 1 << lowest_bit(clt->rate_cfg); -+ if (IS_ACX100(adev)) -+ clt->rate_100 = acx_bitpos2rate100[lowest_bit(clt->rate_cfg)]; -+ clt->fallback_count = clt->stepup_count = 0; -+ clt->ignore_count = 16; -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_ASSOCRESPi; -+ head->dur = req->hdr->dur; -+ MAC_COPY(head->da, da); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, bssid); -+ head->seq = req->hdr->seq; -+ -+ body->cap_info = host2ieee16(adev->capabilities); -+ body->status = host2ieee16(0); -+ body->aid = host2ieee16(clt->aid); -+ p = wlan_fill_ie_rates((u8*)&body->rates, adev->rate_supported_len, -+ adev->rate_supported); -+ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, -+ adev->rate_supported); -+ -+ acx_l_tx_data(adev, tx, p - (u8*)head); -+ok: -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+* acx_l_transmit_reassocresp -+ -+You may be wondering, just like me, what the hell ReAuth is. -+In practice it was seen sent by STA when STA feels like losing connection. -+ -+[802.11] -+ -+5.4.2.3 Reassociation -+ -+Association is sufficient for no-transition message delivery between -+IEEE 802.11 stations. Additional functionality is needed to support -+BSS-transition mobility. The additional required functionality -+is provided by the reassociation service. Reassociation is a DSS. -+The reassociation service is invoked to 'move' a current association -+from one AP to another. This keeps the DS informed of the current -+mapping between AP and STA as the station moves from BSS to BSS within -+an ESS. Reassociation also enables changing association attributes -+of an established association while the STA remains associated with -+the same AP. Reassociation is always initiated by the mobile STA. -+ -+5.4.3.1 Authentication -+... -+A STA may be authenticated with many other STAs at any given instant. -+ -+5.4.3.1.1 Preauthentication -+ -+Because the authentication process could be time-consuming (depending -+on the authentication protocol in use), the authentication service can -+be invoked independently of the association service. Preauthentication -+is typically done by a STA while it is already associated with an AP -+(with which it previously authenticated). IEEE 802.11 does not require -+that STAs preauthenticate with APs. However, authentication is required -+before an association can be established. If the authentication is left -+until reassociation time, this may impact the speed with which a STA can -+reassociate between APs, limiting BSS-transition mobility performance. -+The use of preauthentication takes the authentication service overhead -+out of the time-critical reassociation process. -+ -+5.7.3 Reassociation -+ -+For a STA to reassociate, the reassociation service causes the following -+message to occur: -+ -+ Reassociation request -+ -+* Message type: Management -+* Message subtype: Reassociation request -+* Information items: -+ - IEEE address of the STA -+ - IEEE address of the AP with which the STA will reassociate -+ - IEEE address of the AP with which the STA is currently associated -+ - ESSID -+* Direction of message: From STA to 'new' AP -+ -+The address of the current AP is included for efficiency. The inclusion -+of the current AP address facilitates MAC reassociation to be independent -+of the DS implementation. -+ -+ Reassociation response -+* Message type: Management -+* Message subtype: Reassociation response -+* Information items: -+ - Result of the requested reassociation. (success/failure) -+ - If the reassociation is successful, the response shall include the AID. -+* Direction of message: From AP to STA -+ -+7.2.3.6 Reassociation Request frame format -+ -+The frame body of a management frame of subtype Reassociation Request -+contains the information shown in Table 9. -+ -+Table 9 Reassociation Request frame body -+Order Information -+1 Capability information -+2 Listen interval -+3 Current AP address -+4 SSID -+5 Supported rates -+ -+7.2.3.7 Reassociation Response frame format -+ -+The frame body of a management frame of subtype Reassociation Response -+contains the information shown in Table 10. -+ -+Table 10 Reassociation Response frame body -+Order Information -+1 Capability information -+2 Status code -+3 Association ID (AID) -+4 Supported rates -+ -+*/ -+static int -+acx_l_transmit_reassocresp(acx_device_t *adev, const wlan_fr_reassocreq_t *req) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct reassocresp_frame_body *body; -+ u8 *p; -+ const u8 *da; -+ /* const u8 *sa; */ -+ const u8 *bssid; -+ client_t *clt; -+ -+ FN_ENTER; -+ -+ /* sa = req->hdr->a1; */ -+ da = req->hdr->a2; -+ bssid = req->hdr->a3; -+ -+ /* Must be already authenticated, so it must be in the list */ -+ clt = acx_l_sta_list_get(adev, da); -+ if (!clt) -+ goto ok; -+ -+ /* Assoc without auth is a big no-no */ -+ /* Already assoc'ed STAs sending ReAssoc req are ok per 802.11 */ -+ if (clt->used != CLIENT_AUTHENTICATED_2 -+ && clt->used != CLIENT_ASSOCIATED_3) { -+ acx_l_transmit_deauthen(adev, da, WLAN_MGMT_REASON_CLASS2_NONAUTH); -+ goto bad; -+ } -+ -+ clt->used = CLIENT_ASSOCIATED_3; -+ if (clt->aid == 0) { -+ clt->aid = ++adev->aid; -+ } -+ if (req->cap_info) -+ clt->cap_info = ieee2host16(*(req->cap_info)); -+ -+ /* We cheat here a bit. We don't really care which rates are flagged -+ ** as basic by the client, so we stuff them in single ratemask */ -+ clt->rate_cap = 0; -+ if (req->supp_rates) -+ add_bits_to_ratemasks(req->supp_rates->rates, -+ req->supp_rates->len, &clt->rate_cap, &clt->rate_cap); -+ if (req->ext_rates) -+ add_bits_to_ratemasks(req->ext_rates->rates, -+ req->ext_rates->len, &clt->rate_cap, &clt->rate_cap); -+ /* We can check that client supports all basic rates, -+ ** and deny assoc if not. But let's be liberal, right? ;) */ -+ clt->rate_cfg = clt->rate_cap & adev->rate_oper; -+ if (!clt->rate_cfg) clt->rate_cfg = 1 << lowest_bit(adev->rate_oper); -+ clt->rate_cur = 1 << lowest_bit(clt->rate_cfg); -+ if (IS_ACX100(adev)) -+ clt->rate_100 = acx_bitpos2rate100[lowest_bit(clt->rate_cfg)]; -+ -+ clt->fallback_count = clt->stepup_count = 0; -+ clt->ignore_count = 16; -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto ok; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto ok; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_REASSOCRESPi; -+ head->dur = req->hdr->dur; -+ MAC_COPY(head->da, da); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, bssid); -+ head->seq = req->hdr->seq; -+ -+ /* IEs: 1. caps */ -+ body->cap_info = host2ieee16(adev->capabilities); -+ /* 2. status code */ -+ body->status = host2ieee16(0); -+ /* 3. AID */ -+ body->aid = host2ieee16(clt->aid); -+ /* 4. supp rates */ -+ p = wlan_fill_ie_rates((u8*)&body->rates, adev->rate_supported_len, -+ adev->rate_supported); -+ /* 5. ext supp rates */ -+ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, -+ adev->rate_supported); -+ -+ acx_l_tx_data(adev, tx, p - (u8*)head); -+ok: -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_disassoc_from_sta -+*/ -+static void -+acx_l_process_disassoc_from_sta(acx_device_t *adev, const wlan_fr_disassoc_t *req) -+{ -+ const u8 *ta; -+ client_t *clt; -+ -+ FN_ENTER; -+ -+ ta = req->hdr->a2; -+ clt = acx_l_sta_list_get(adev, ta); -+ if (!clt) -+ goto end; -+ -+ if (clt->used != CLIENT_ASSOCIATED_3 -+ && clt->used != CLIENT_AUTHENTICATED_2) { -+ /* it's disassociating, but it's -+ ** not even authenticated! Let it know that */ -+ acxlog_mac(L_ASSOC|L_XFER, "peer ", ta, "has sent disassoc " -+ "req but it is not even auth'ed! sending deauth\n"); -+ acx_l_transmit_deauthen(adev, ta, -+ WLAN_MGMT_REASON_CLASS2_NONAUTH); -+ clt->used = CLIENT_EXIST_1; -+ } else { -+ /* mark it as auth'ed only */ -+ clt->used = CLIENT_AUTHENTICATED_2; -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_deauthen_from_sta -+*/ -+static void -+acx_l_process_deauth_from_sta(acx_device_t *adev, const wlan_fr_deauthen_t *req) -+{ -+ const wlan_hdr_t *hdr; -+ client_t *client; -+ -+ FN_ENTER; -+ -+ hdr = req->hdr; -+ -+ if (acx_debug & L_ASSOC) { -+ acx_print_mac("got deauth from sta:", hdr->a2, " "); -+ acx_print_mac("a1:", hdr->a1, " "); -+ acx_print_mac("a3:", hdr->a3, " "); -+ acx_print_mac("adev->addr:", adev->dev_addr, " "); -+ acx_print_mac("adev->bssid:", adev->bssid, "\n"); -+ } -+ -+ if (!mac_is_equal(adev->dev_addr, hdr->a1)) { -+ goto end; -+ } -+ -+ client = acx_l_sta_list_get(adev, hdr->a2); -+ if (!client) { -+ goto end; -+ } -+ client->used = CLIENT_EXIST_1; -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_disassoc_from_ap -+*/ -+static void -+acx_l_process_disassoc_from_ap(acx_device_t *adev, const wlan_fr_disassoc_t *req) -+{ -+ FN_ENTER; -+ -+ if (!adev->ap_client) { -+ /* Hrm, we aren't assoc'ed yet anyhow... */ -+ goto end; -+ } -+ -+ printk("%s: got disassoc frame with reason %d (%s)\n", -+ adev->ndev->name, *req->reason, -+ acx_wlan_reason_str(*req->reason)); -+ -+ if (mac_is_equal(adev->dev_addr, req->hdr->a1)) { -+ acx_l_transmit_deauthen(adev, adev->bssid, -+ WLAN_MGMT_REASON_DEAUTH_LEAVING); -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_deauth_from_ap -+*/ -+static void -+acx_l_process_deauth_from_ap(acx_device_t *adev, const wlan_fr_deauthen_t *req) -+{ -+ FN_ENTER; -+ -+ if (!adev->ap_client) { -+ /* Hrm, we aren't assoc'ed yet anyhow... */ -+ goto end; -+ } -+ -+ printk("%s: got deauth frame with reason %d (%s)\n", -+ adev->ndev->name, *req->reason, -+ acx_wlan_reason_str(*req->reason)); -+ -+ /* Chk: is ta verified to be from our AP? */ -+ if (mac_is_equal(adev->dev_addr, req->hdr->a1)) { -+ log(L_DEBUG, "AP sent us deauth packet\n"); -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_rx -+** -+** The end of the Rx path. Pulls data from a rxhostdesc into a socket -+** buffer and feeds it to the network stack via netif_rx(). -+*/ -+static void -+acx_l_rx(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ FN_ENTER; -+ if (likely(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { -+ struct sk_buff *skb; -+ skb = acx_rxbuf_to_ether(adev, rxbuf); -+ if (likely(skb)) { -+ netif_rx(skb); -+ adev->ndev->last_rx = jiffies; -+ adev->stats.rx_packets++; -+ adev->stats.rx_bytes += skb->len; -+ } -+ } -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_data_frame_master -+*/ -+static int -+acx_l_process_data_frame_master(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ struct wlan_hdr *hdr; -+ struct tx *tx; -+ void *txbuf; -+ int len; -+ int result = NOT_OK; -+ -+ FN_ENTER; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ -+ switch (WF_FC_FROMTODSi & hdr->fc) { -+ case 0: -+ case WF_FC_FROMDSi: -+ log(L_DEBUG, "ap->sta or adhoc->adhoc data frame ignored\n"); -+ goto done; -+ case WF_FC_TODSi: -+ break; -+ default: /* WF_FC_FROMTODSi */ -+ log(L_DEBUG, "wds data frame ignored (TODO)\n"); -+ goto done; -+ } -+ -+ /* check if it is our BSSID, if not, leave */ -+ if (!mac_is_equal(adev->bssid, hdr->a1)) { -+ goto done; -+ } -+ -+ if (mac_is_equal(adev->dev_addr, hdr->a3)) { -+ /* this one is for us */ -+ acx_l_rx(adev, rxbuf); -+ } else { -+ if (mac_is_bcast(hdr->a3)) { -+ /* this one is bcast, rx it too */ -+ acx_l_rx(adev, rxbuf); -+ } -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) { -+ goto fail; -+ } -+ /* repackage, tx, and hope it someday reaches its destination */ -+ /* order is important, we do it in-place */ -+ MAC_COPY(hdr->a1, hdr->a3); -+ MAC_COPY(hdr->a3, hdr->a2); -+ MAC_COPY(hdr->a2, adev->bssid); -+ /* To_DS = 0, From_DS = 1 */ -+ hdr->fc = WF_FC_FROMDSi + WF_FTYPE_DATAi; -+ -+ txbuf = acx_l_get_txbuf(adev, tx); -+ if (txbuf) { -+ len = RXBUF_BYTES_RCVD(adev, rxbuf); -+ memcpy(txbuf, hdr, len); -+ acx_l_tx_data(adev, tx, len); -+ } else { -+ acx_l_dealloc_tx(adev, tx); -+ } -+ } -+done: -+ result = OK; -+fail: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_data_frame_client -+*/ -+static int -+acx_l_process_data_frame_client(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ const u8 *da, *bssid; -+ const wlan_hdr_t *hdr; -+ struct net_device *ndev = adev->ndev; -+ int result = NOT_OK; -+ -+ FN_ENTER; -+ -+ if (ACX_STATUS_4_ASSOCIATED != adev->status) -+ goto drop; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ -+ switch (WF_FC_FROMTODSi & hdr->fc) { -+ case 0: -+ if (adev->mode != ACX_MODE_0_ADHOC) { -+ log(L_DEBUG, "adhoc->adhoc data frame ignored\n"); -+ goto drop; -+ } -+ bssid = hdr->a3; -+ break; -+ case WF_FC_FROMDSi: -+ if (adev->mode != ACX_MODE_2_STA) { -+ log(L_DEBUG, "ap->sta data frame ignored\n"); -+ goto drop; -+ } -+ bssid = hdr->a2; -+ break; -+ case WF_FC_TODSi: -+ log(L_DEBUG, "sta->ap data frame ignored\n"); -+ goto drop; -+ default: /* WF_FC_FROMTODSi: wds->wds */ -+ log(L_DEBUG, "wds data frame ignored (todo)\n"); -+ goto drop; -+ } -+ -+ da = hdr->a1; -+ -+ if (unlikely(acx_debug & L_DEBUG)) { -+ acx_print_mac("rx: da=", da, ""); -+ acx_print_mac(" bssid=", bssid, ""); -+ acx_print_mac(" adev->bssid=", adev->bssid, ""); -+ acx_print_mac(" adev->addr=", adev->dev_addr, "\n"); -+ } -+ -+ /* promiscuous mode --> receive all packets */ -+ if (unlikely(ndev->flags & IFF_PROMISC)) -+ goto process; -+ -+ /* FIRST, check if it is our BSSID */ -+ if (!mac_is_equal(adev->bssid, bssid)) { -+ /* is not our BSSID, so bail out */ -+ goto drop; -+ } -+ -+ /* then, check if it is our address */ -+ if (mac_is_equal(adev->dev_addr, da)) { -+ goto process; -+ } -+ -+ /* then, check if it is broadcast */ -+ if (mac_is_bcast(da)) { -+ goto process; -+ } -+ -+ if (mac_is_mcast(da)) { -+ /* unconditionally receive all multicasts */ -+ if (ndev->flags & IFF_ALLMULTI) -+ goto process; -+ -+ /* FIXME: need to check against the list of -+ * multicast addresses that are configured -+ * for the interface (ifconfig) */ -+ log(L_XFER, "FIXME: multicast packet, need to check " -+ "against a list of multicast addresses " -+ "(to be created!); accepting packet for now\n"); -+ /* for now, just accept it here */ -+ goto process; -+ } -+ -+ log(L_DEBUG, "rx: foreign packet, dropping\n"); -+ goto drop; -+process: -+ /* receive packet */ -+ acx_l_rx(adev, rxbuf); -+ -+ result = OK; -+drop: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_mgmt_frame -+** -+** Theory of operation: mgmt packet gets parsed (to make it easy -+** to access variable-sized IEs), results stored in 'parsed'. -+** Then we react to the packet. -+*/ -+typedef union parsed_mgmt_req { -+ wlan_fr_mgmt_t mgmt; -+ wlan_fr_assocreq_t assocreq; -+ wlan_fr_reassocreq_t reassocreq; -+ wlan_fr_assocresp_t assocresp; -+ wlan_fr_reassocresp_t reassocresp; -+ wlan_fr_beacon_t beacon; -+ wlan_fr_disassoc_t disassoc; -+ wlan_fr_authen_t authen; -+ wlan_fr_deauthen_t deauthen; -+ wlan_fr_proberesp_t proberesp; -+} parsed_mgmt_req_t; -+ -+void BUG_excessive_stack_usage(void); -+ -+static int -+acx_l_process_mgmt_frame(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ parsed_mgmt_req_t parsed; /* takes ~100 bytes of stack */ -+ wlan_hdr_t *hdr; -+ int adhoc, sta_scan, sta, ap; -+ int len; -+ -+ if (sizeof(parsed) > 256) -+ BUG_excessive_stack_usage(); -+ -+ FN_ENTER; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ -+ /* Management frames never have these set */ -+ if (WF_FC_FROMTODSi & hdr->fc) { -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+ } -+ -+ len = RXBUF_BYTES_RCVD(adev, rxbuf); -+ if (WF_FC_ISWEPi & hdr->fc) -+ len -= 0x10; -+ -+ adhoc = (adev->mode == ACX_MODE_0_ADHOC); -+ sta_scan = ((adev->mode == ACX_MODE_2_STA) -+ && (adev->status != ACX_STATUS_4_ASSOCIATED)); -+ sta = ((adev->mode == ACX_MODE_2_STA) -+ && (adev->status == ACX_STATUS_4_ASSOCIATED)); -+ ap = (adev->mode == ACX_MODE_3_AP); -+ -+ switch (WF_FC_FSTYPEi & hdr->fc) { -+ /* beacons first, for speed */ -+ case WF_FSTYPE_BEACONi: -+ memset(&parsed.beacon, 0, sizeof(parsed.beacon)); -+ parsed.beacon.hdr = hdr; -+ parsed.beacon.len = len; -+ if (acx_debug & L_DATA) { -+ printk("beacon len:%d fc:%04X dur:%04X seq:%04X", -+ len, hdr->fc, hdr->dur, hdr->seq); -+ acx_print_mac(" a1:", hdr->a1, ""); -+ acx_print_mac(" a2:", hdr->a2, ""); -+ acx_print_mac(" a3:", hdr->a3, "\n"); -+ } -+ wlan_mgmt_decode_beacon(&parsed.beacon); -+ /* beacon and probe response are very similar, so... */ -+ acx_l_process_probe_response(adev, &parsed.beacon, rxbuf); -+ break; -+ case WF_FSTYPE_ASSOCREQi: -+ if (!ap) -+ break; -+ memset(&parsed.assocreq, 0, sizeof(parsed.assocreq)); -+ parsed.assocreq.hdr = hdr; -+ parsed.assocreq.len = len; -+ wlan_mgmt_decode_assocreq(&parsed.assocreq); -+ if (mac_is_equal(hdr->a1, adev->bssid) -+ && mac_is_equal(hdr->a3, adev->bssid)) { -+ acx_l_transmit_assocresp(adev, &parsed.assocreq); -+ } -+ break; -+ case WF_FSTYPE_REASSOCREQi: -+ if (!ap) -+ break; -+ memset(&parsed.assocreq, 0, sizeof(parsed.assocreq)); -+ parsed.assocreq.hdr = hdr; -+ parsed.assocreq.len = len; -+ wlan_mgmt_decode_assocreq(&parsed.assocreq); -+ /* reassocreq and assocreq are equivalent */ -+ acx_l_transmit_reassocresp(adev, &parsed.reassocreq); -+ break; -+ case WF_FSTYPE_ASSOCRESPi: -+ if (!sta_scan) -+ break; -+ memset(&parsed.assocresp, 0, sizeof(parsed.assocresp)); -+ parsed.assocresp.hdr = hdr; -+ parsed.assocresp.len = len; -+ wlan_mgmt_decode_assocresp(&parsed.assocresp); -+ acx_l_process_assocresp(adev, &parsed.assocresp); -+ break; -+ case WF_FSTYPE_REASSOCRESPi: -+ if (!sta_scan) -+ break; -+ memset(&parsed.assocresp, 0, sizeof(parsed.assocresp)); -+ parsed.assocresp.hdr = hdr; -+ parsed.assocresp.len = len; -+ wlan_mgmt_decode_assocresp(&parsed.assocresp); -+ acx_l_process_reassocresp(adev, &parsed.reassocresp); -+ break; -+ case WF_FSTYPE_PROBEREQi: -+ if (ap || adhoc) { -+ /* FIXME: since we're supposed to be an AP, -+ ** we need to return a Probe Response packet. -+ ** Currently firmware is doing it for us, -+ ** but firmware is buggy! See comment elsewhere --vda */ -+ } -+ break; -+ case WF_FSTYPE_PROBERESPi: -+ memset(&parsed.proberesp, 0, sizeof(parsed.proberesp)); -+ parsed.proberesp.hdr = hdr; -+ parsed.proberesp.len = len; -+ wlan_mgmt_decode_proberesp(&parsed.proberesp); -+ acx_l_process_probe_response(adev, &parsed.proberesp, rxbuf); -+ break; -+ case 6: -+ case 7: -+ /* exit */ -+ break; -+ case WF_FSTYPE_ATIMi: -+ /* exit */ -+ break; -+ case WF_FSTYPE_DISASSOCi: -+ if (!sta && !ap) -+ break; -+ memset(&parsed.disassoc, 0, sizeof(parsed.disassoc)); -+ parsed.disassoc.hdr = hdr; -+ parsed.disassoc.len = len; -+ wlan_mgmt_decode_disassoc(&parsed.disassoc); -+ if (sta) -+ acx_l_process_disassoc_from_ap(adev, &parsed.disassoc); -+ else -+ acx_l_process_disassoc_from_sta(adev, &parsed.disassoc); -+ break; -+ case WF_FSTYPE_AUTHENi: -+ if (!sta_scan && !ap) -+ break; -+ memset(&parsed.authen, 0, sizeof(parsed.authen)); -+ parsed.authen.hdr = hdr; -+ parsed.authen.len = len; -+ wlan_mgmt_decode_authen(&parsed.authen); -+ acx_l_process_authen(adev, &parsed.authen); -+ break; -+ case WF_FSTYPE_DEAUTHENi: -+ if (!sta && !ap) -+ break; -+ memset(&parsed.deauthen, 0, sizeof(parsed.deauthen)); -+ parsed.deauthen.hdr = hdr; -+ parsed.deauthen.len = len; -+ wlan_mgmt_decode_deauthen(&parsed.deauthen); -+ if (sta) -+ acx_l_process_deauth_from_ap(adev, &parsed.deauthen); -+ else -+ acx_l_process_deauth_from_sta(adev, &parsed.deauthen); -+ break; -+ } -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+#ifdef UNUSED -+/*********************************************************************** -+** acx_process_class_frame -+** -+** Called from IRQ context only -+*/ -+static int -+acx_process_class_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala) -+{ -+ return OK; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_l_process_NULL_frame -+*/ -+#ifdef BOGUS_ITS_NOT_A_NULL_FRAME_HANDLER_AT_ALL -+static int -+acx_l_process_NULL_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala) -+{ -+ const signed char *esi; -+ const u8 *ebx; -+ const wlan_hdr_t *hdr; -+ const client_t *client; -+ int result = NOT_OK; -+ -+ hdr = acx_get_wlan_hdr(adev, rxbuf); -+ -+ switch (WF_FC_FROMTODSi & hdr->fc) { -+ case 0: -+ esi = hdr->a1; -+ ebx = hdr->a2; -+ break; -+ case WF_FC_FROMDSi: -+ esi = hdr->a1; -+ ebx = hdr->a3; -+ break; -+ case WF_FC_TODSi: -+ esi = hdr->a1; -+ ebx = hdr->a2; -+ break; -+ default: /* WF_FC_FROMTODSi */ -+ esi = hdr->a1; /* added by me! --vda */ -+ ebx = hdr->a2; -+ } -+ -+ if (esi[0x0] < 0) { -+ result = OK; -+ goto done; -+ } -+ -+ client = acx_l_sta_list_get(adev, ebx); -+ if (client) -+ result = NOT_OK; -+ else { -+#ifdef IS_IT_BROKEN -+ log(L_DEBUG|L_XFER, "\n"); -+ acx_l_transmit_deauthen(adev, ebx, -+ WLAN_MGMT_REASON_CLASS2_NONAUTH); -+#else -+ log(L_DEBUG, "received NULL frame from unknown client! " -+ "We really shouldn't send deauthen here, right?\n"); -+#endif -+ result = OK; -+ } -+done: -+ return result; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_l_process_probe_response -+*/ -+static int -+acx_l_process_probe_response(acx_device_t *adev, wlan_fr_proberesp_t *req, -+ const rxbuffer_t *rxbuf) -+{ -+ struct client *bss; -+ wlan_hdr_t *hdr; -+ -+ FN_ENTER; -+ -+ hdr = req->hdr; -+ -+ if (mac_is_equal(hdr->a3, adev->dev_addr)) { -+ log(L_ASSOC, "huh, scan found our own MAC!?\n"); -+ goto ok; /* just skip this one silently */ -+ } -+ -+ bss = acx_l_sta_list_get_or_add(adev, hdr->a2); -+ -+ /* NB: be careful modifying bss data! It may be one -+ ** of the already known clients (like our AP if we are a STA) -+ ** Thus do not blindly modify e.g. current ratemask! */ -+ -+ if (STA_LIST_ADD_CAN_FAIL && !bss) { -+ /* uh oh, we found more sites/stations than we can handle with -+ * our current setup: pull the emergency brake and stop scanning! */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_STOP_SCAN); -+ /* TODO: a nice comment what below call achieves --vda */ -+ acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH); -+ goto ok; -+ } -+ /* NB: get_or_add already filled bss->address = hdr->a2 */ -+ MAC_COPY(bss->bssid, hdr->a3); -+ -+ /* copy the ESSID element */ -+ if (req->ssid && req->ssid->len <= IW_ESSID_MAX_SIZE) { -+ bss->essid_len = req->ssid->len; -+ memcpy(bss->essid, req->ssid->ssid, req->ssid->len); -+ bss->essid[req->ssid->len] = '\0'; -+ } else { -+ /* Either no ESSID IE or oversized one */ -+ printk("%s: received packet has bogus ESSID\n", -+ adev->ndev->name); -+ } -+ -+ if (req->ds_parms) -+ bss->channel = req->ds_parms->curr_ch; -+ if (req->cap_info) -+ bss->cap_info = ieee2host16(*req->cap_info); -+ -+ bss->sir = acx_signal_to_winlevel(rxbuf->phy_level); -+ bss->snr = acx_signal_to_winlevel(rxbuf->phy_snr); -+ -+ bss->rate_cap = 0; /* operational mask */ -+ bss->rate_bas = 0; /* basic mask */ -+ if (req->supp_rates) -+ add_bits_to_ratemasks(req->supp_rates->rates, -+ req->supp_rates->len, &bss->rate_bas, &bss->rate_cap); -+ if (req->ext_rates) -+ add_bits_to_ratemasks(req->ext_rates->rates, -+ req->ext_rates->len, &bss->rate_bas, &bss->rate_cap); -+ /* Fix up any possible bogosity - code elsewhere -+ * is not expecting empty masks */ -+ if (!bss->rate_cap) -+ bss->rate_cap = adev->rate_basic; -+ if (!bss->rate_bas) -+ bss->rate_bas = 1 << lowest_bit(bss->rate_cap); -+ if (!bss->rate_cur) -+ bss->rate_cur = 1 << lowest_bit(bss->rate_bas); -+ -+ /* People moan about this being too noisy at L_ASSOC */ -+ log(L_DEBUG, -+ "found %s: ESSID=\"%s\" ch=%d " -+ "BSSID="MACSTR" caps=0x%04X SIR=%d SNR=%d\n", -+ (bss->cap_info & WF_MGMT_CAP_IBSS) ? "Ad-Hoc peer" : "AP", -+ bss->essid, bss->channel, MAC(bss->bssid), bss->cap_info, -+ bss->sir, bss->snr); -+ok: -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_assocresp -+*/ -+static int -+acx_l_process_assocresp(acx_device_t *adev, const wlan_fr_assocresp_t *req) -+{ -+ const wlan_hdr_t *hdr; -+ int res = OK; -+ -+ FN_ENTER; -+ -+ hdr = req->hdr; -+ -+ if ((ACX_MODE_2_STA == adev->mode) -+ && mac_is_equal(adev->dev_addr, hdr->a1)) { -+ u16 st = ieee2host16(*(req->status)); -+ if (WLAN_MGMT_STATUS_SUCCESS == st) { -+ adev->aid = ieee2host16(*(req->aid)); -+ /* tell the card we are associated when -+ ** we are out of interrupt context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_ASSOCIATE); -+ } else { -+ -+ /* TODO: we shall delete peer from sta_list, and try -+ ** other candidates... */ -+ -+ printk("%s: association FAILED: peer sent " -+ "Status Code %d (%s)\n", -+ adev->ndev->name, st, get_status_string(st)); -+ res = NOT_OK; -+ } -+ } -+ -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_reassocresp -+*/ -+static int -+acx_l_process_reassocresp(acx_device_t *adev, const wlan_fr_reassocresp_t *req) -+{ -+ const wlan_hdr_t *hdr; -+ int result = NOT_OK; -+ u16 st; -+ -+ FN_ENTER; -+ -+ hdr = req->hdr; -+ -+ if (!mac_is_equal(adev->dev_addr, hdr->a1)) { -+ goto end; -+ } -+ st = ieee2host16(*(req->status)); -+ if (st == WLAN_MGMT_STATUS_SUCCESS) { -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ result = OK; -+ } else { -+ printk("%s: reassociation FAILED: peer sent " -+ "response code %d (%s)\n", -+ adev->ndev->name, st, get_status_string(st)); -+ } -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_l_process_authen -+** -+** Called only in STA_SCAN or AP mode -+*/ -+static int -+acx_l_process_authen(acx_device_t *adev, const wlan_fr_authen_t *req) -+{ -+ const wlan_hdr_t *hdr; -+ client_t *clt; -+ wlan_ie_challenge_t *chal; -+ u16 alg, seq, status; -+ int ap, result; -+ -+ FN_ENTER; -+ -+ hdr = req->hdr; -+ -+ if (acx_debug & L_ASSOC) { -+ acx_print_mac("AUTHEN adev->addr=", adev->dev_addr, " "); -+ acx_print_mac("a1=", hdr->a1, " "); -+ acx_print_mac("a2=", hdr->a2, " "); -+ acx_print_mac("a3=", hdr->a3, " "); -+ acx_print_mac("adev->bssid=", adev->bssid, "\n"); -+ } -+ -+ if (!mac_is_equal(adev->dev_addr, hdr->a1) -+ || !mac_is_equal(adev->bssid, hdr->a3)) { -+ result = OK; -+ goto end; -+ } -+ -+ alg = ieee2host16(*(req->auth_alg)); -+ seq = ieee2host16(*(req->auth_seq)); -+ status = ieee2host16(*(req->status)); -+ -+ log(L_ASSOC, "auth algorithm %d, auth sequence %d, status %d\n", alg, seq, status); -+ -+ ap = (adev->mode == ACX_MODE_3_AP); -+ -+ if (adev->auth_alg <= 1) { -+ if (adev->auth_alg != alg) { -+ log(L_ASSOC, "auth algorithm mismatch: " -+ "our:%d peer:%d\n", adev->auth_alg, alg); -+ result = NOT_OK; -+ goto end; -+ } -+ } -+ if (ap) { -+ clt = acx_l_sta_list_get_or_add(adev, hdr->a2); -+ if (STA_LIST_ADD_CAN_FAIL && !clt) { -+ log(L_ASSOC, "could not allocate room for client\n"); -+ result = NOT_OK; -+ goto end; -+ } -+ } else { -+ clt = adev->ap_client; -+ if (!mac_is_equal(clt->address, hdr->a2)) { -+ printk("%s: malformed auth frame from AP?!\n", -+ adev->ndev->name); -+ result = NOT_OK; -+ goto end; -+ } -+ } -+ -+ /* now check which step in the authentication sequence we are -+ * currently in, and act accordingly */ -+ switch (seq) { -+ case 1: -+ if (!ap) -+ break; -+ acx_l_transmit_authen2(adev, req, clt); -+ break; -+ case 2: -+ if (ap) -+ break; -+ if (status == WLAN_MGMT_STATUS_SUCCESS) { -+ if (alg == WLAN_AUTH_ALG_OPENSYSTEM) { -+ acx_set_status(adev, ACX_STATUS_3_AUTHENTICATED); -+ acx_l_transmit_assoc_req(adev); -+ } else -+ if (alg == WLAN_AUTH_ALG_SHAREDKEY) { -+ acx_l_transmit_authen3(adev, req); -+ } -+ } else { -+ printk("%s: auth FAILED: peer sent " -+ "response code %d (%s), " -+ "still waiting for authentication\n", -+ adev->ndev->name, -+ status, get_status_string(status)); -+ acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH); -+ } -+ break; -+ case 3: -+ if (!ap) -+ break; -+ if ((clt->auth_alg != WLAN_AUTH_ALG_SHAREDKEY) -+ || (alg != WLAN_AUTH_ALG_SHAREDKEY) -+ || (clt->auth_step != 2)) -+ break; -+ chal = req->challenge; -+ if (!chal -+ || memcmp(chal->challenge, clt->challenge_text, WLAN_CHALLENGE_LEN) -+ || (chal->eid != WLAN_EID_CHALLENGE) -+ || (chal->len != WLAN_CHALLENGE_LEN) -+ ) -+ break; -+ acx_l_transmit_authen4(adev, req); -+ MAC_COPY(clt->address, hdr->a2); -+ clt->used = CLIENT_AUTHENTICATED_2; -+ clt->auth_step = 4; -+ clt->seq = ieee2host16(hdr->seq); -+ break; -+ case 4: -+ if (ap) -+ break; -+ /* ok, we're through: we're authenticated. Woohoo!! */ -+ acx_set_status(adev, ACX_STATUS_3_AUTHENTICATED); -+ log(L_ASSOC, "Authenticated!\n"); -+ /* now that we're authenticated, request association */ -+ acx_l_transmit_assoc_req(adev); -+ break; -+ } -+ result = OK; -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_gen_challenge -+*/ -+static inline void -+acx_gen_challenge(wlan_ie_challenge_t* d) -+{ -+ FN_ENTER; -+ d->eid = WLAN_EID_CHALLENGE; -+ d->len = WLAN_CHALLENGE_LEN; -+ get_random_bytes(d->challenge, WLAN_CHALLENGE_LEN); -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_deauthen -+*/ -+static int -+acx_l_transmit_deauthen(acx_device_t *adev, const u8 *addr, u16 reason) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct deauthen_frame_body *body; -+ -+ FN_ENTER; -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = (WF_FTYPE_MGMTi | WF_FSTYPE_DEAUTHENi); -+ head->dur = 0; -+ MAC_COPY(head->da, addr); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, adev->bssid); -+ head->seq = 0; -+ -+ log(L_DEBUG|L_ASSOC|L_XFER, -+ "sending deauthen to "MACSTR" for %d\n", -+ MAC(addr), reason); -+ -+ body->reason = host2ieee16(reason); -+ -+ /* body is fixed size here, but beware of cutting-and-pasting this - -+ ** do not use sizeof(*body) for variable sized mgmt packets! */ -+ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + sizeof(*body)); -+ -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_authen1 -+*/ -+static int -+acx_l_transmit_authen1(acx_device_t *adev) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct auth_frame_body *body; -+ -+ FN_ENTER; -+ -+ log(L_ASSOC, "sending authentication1 request (auth algo %d), " -+ "awaiting response\n", adev->auth_alg); -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_AUTHENi; -+ /* duration should be 0 instead of 0x8000 to have -+ * the firmware calculate the value, right? */ -+ head->dur = 0; -+ MAC_COPY(head->da, adev->bssid); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, adev->bssid); -+ head->seq = 0; -+ -+ body->auth_alg = host2ieee16(adev->auth_alg); -+ body->auth_seq = host2ieee16(1); -+ body->status = host2ieee16(0); -+ -+ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + 2 + 2 + 2); -+ -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_authen2 -+*/ -+static int -+acx_l_transmit_authen2(acx_device_t *adev, const wlan_fr_authen_t *req, -+ client_t *clt) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct auth_frame_body *body; -+ unsigned int packet_len; -+ -+ FN_ENTER; -+ -+ if (!clt) -+ goto ok; -+ -+ MAC_COPY(clt->address, req->hdr->a2); -+#ifdef UNUSED -+ clt->ps = ((WF_FC_PWRMGTi & req->hdr->fc) != 0); -+#endif -+ clt->auth_alg = ieee2host16(*(req->auth_alg)); -+ clt->auth_step = 2; -+ clt->seq = ieee2host16(req->hdr->seq); -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_AUTHENi; -+ head->dur = 0 /* req->hdr->dur */; -+ MAC_COPY(head->da, req->hdr->a2); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, req->hdr->a3); -+ head->seq = 0 /* req->hdr->seq */; -+ -+ /* already in IEEE format, no endianness conversion */ -+ body->auth_alg = *(req->auth_alg); -+ body->auth_seq = host2ieee16(2); -+ body->status = host2ieee16(0); -+ -+ packet_len = WLAN_HDR_A3_LEN + 2 + 2 + 2; -+ if (ieee2host16(*(req->auth_alg)) == WLAN_AUTH_ALG_OPENSYSTEM) { -+ clt->used = CLIENT_AUTHENTICATED_2; -+ } else { /* shared key */ -+ acx_gen_challenge(&body->challenge); -+ memcpy(&clt->challenge_text, body->challenge.challenge, WLAN_CHALLENGE_LEN); -+ packet_len += 2 + 2 + 2 + 1+1+WLAN_CHALLENGE_LEN; -+ } -+ -+ acxlog_mac(L_ASSOC|L_XFER, -+ "transmit_auth2: BSSID=", head->bssid, "\n"); -+ -+ acx_l_tx_data(adev, tx, packet_len); -+ok: -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_authen3 -+*/ -+static int -+acx_l_transmit_authen3(acx_device_t *adev, const wlan_fr_authen_t *req) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct auth_frame_body *body; -+ unsigned int packet_len; -+ -+ FN_ENTER; -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto ok; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto ok; -+ } -+ body = (void*)(head + 1); -+ -+ /* add WF_FC_ISWEPi: auth step 3 needs to be encrypted */ -+ head->fc = WF_FC_ISWEPi + WF_FSTYPE_AUTHENi; -+ /* FIXME: is this needed?? authen4 does it... -+ * I think it's even wrong since we shouldn't re-use old -+ * values but instead let the firmware calculate proper ones -+ head->dur = req->hdr->dur; -+ head->seq = req->hdr->seq; -+ */ -+ MAC_COPY(head->da, adev->bssid); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, adev->bssid); -+ -+ /* already in IEEE format, no endianness conversion */ -+ body->auth_alg = *(req->auth_alg); -+ body->auth_seq = host2ieee16(3); -+ body->status = host2ieee16(0); -+ memcpy(&body->challenge, req->challenge, req->challenge->len + 2); -+ packet_len = WLAN_HDR_A3_LEN + 8 + req->challenge->len; -+ -+ log(L_ASSOC|L_XFER, "transmit_authen3!\n"); -+ -+ acx_l_tx_data(adev, tx, packet_len); -+ok: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_authen4 -+*/ -+static int -+acx_l_transmit_authen4(acx_device_t *adev, const wlan_fr_authen_t *req) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct auth_frame_body *body; -+ -+ FN_ENTER; -+ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto ok; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto ok; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_AUTHENi; /* 0xb0 */ -+ head->dur = 0 /* req->hdr->dur */; -+ MAC_COPY(head->da, req->hdr->a2); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, req->hdr->a3); -+ head->seq = 0 /* req->hdr->seq */; -+ -+ /* already in IEEE format, no endianness conversion */ -+ body->auth_alg = *(req->auth_alg); -+ body->auth_seq = host2ieee16(4); -+ body->status = host2ieee16(0); -+ -+ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + 2 + 2 + 2); -+ok: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_assoc_req -+** -+** adev->ap_client is a current candidate AP here -+*/ -+static int -+acx_l_transmit_assoc_req(acx_device_t *adev) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ u8 *body, *p, *prate; -+ unsigned int packet_len; -+ u16 cap; -+ -+ FN_ENTER; -+ -+ log(L_ASSOC, "sending association request, " -+ "awaiting response. NOT ASSOCIATED YET\n"); -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+ head->fc = WF_FSTYPE_ASSOCREQi; -+ head->dur = host2ieee16(0x8000); -+ MAC_COPY(head->da, adev->bssid); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, adev->bssid); -+ head->seq = 0; -+ -+ p = body; -+ /* now start filling the AssocReq frame body */ -+ -+ /* since this assoc request will most likely only get -+ * sent in the STA to AP case (and not when Ad-Hoc IBSS), -+ * the cap combination indicated here will thus be -+ * WF_MGMT_CAP_ESSi *always* (no IBSS ever) -+ * The specs are more than non-obvious on all that: -+ * -+ * 802.11 7.3.1.4 Capability Information field -+ ** APs set the ESS subfield to 1 and the IBSS subfield to 0 within -+ ** Beacon or Probe Response management frames. STAs within an IBSS -+ ** set the ESS subfield to 0 and the IBSS subfield to 1 in transmitted -+ ** Beacon or Probe Response management frames -+ ** -+ ** APs set the Privacy subfield to 1 within transmitted Beacon, -+ ** Probe Response, Association Response, and Reassociation Response -+ ** if WEP is required for all data type frames within the BSS. -+ ** STAs within an IBSS set the Privacy subfield to 1 in Beacon -+ ** or Probe Response management frames if WEP is required -+ ** for all data type frames within the IBSS */ -+ -+ /* note that returning 0 will be refused by several APs... -+ * (so this indicates that you're probably supposed to -+ * "confirm" the ESS mode) */ -+ cap = WF_MGMT_CAP_ESSi; -+ -+ /* this one used to be a check on wep_restricted, -+ * but more likely it's wep_enabled instead */ -+ if (adev->wep_enabled) -+ SET_BIT(cap, WF_MGMT_CAP_PRIVACYi); -+ -+ /* Probably we can just set these always, because our hw is -+ ** capable of shortpre and PBCC --vda */ -+ /* only ask for short preamble if the peer station supports it */ -+ if (adev->ap_client->cap_info & WF_MGMT_CAP_SHORT) -+ SET_BIT(cap, WF_MGMT_CAP_SHORTi); -+ /* only ask for PBCC support if the peer station supports it */ -+ if (adev->ap_client->cap_info & WF_MGMT_CAP_PBCC) -+ SET_BIT(cap, WF_MGMT_CAP_PBCCi); -+ -+ /* IEs: 1. caps */ -+ *(u16*)p = cap; p += 2; -+ /* 2. listen interval */ -+ *(u16*)p = host2ieee16(adev->listen_interval); p += 2; -+ /* 3. ESSID */ -+ p = wlan_fill_ie_ssid(p, -+ strlen(adev->essid_for_assoc), adev->essid_for_assoc); -+ /* 4. supp rates */ -+ prate = p; -+ p = wlan_fill_ie_rates(p, -+ adev->rate_supported_len, adev->rate_supported); -+ /* 5. ext supp rates */ -+ p = wlan_fill_ie_rates_ext(p, -+ adev->rate_supported_len, adev->rate_supported); -+ -+ if (acx_debug & L_DEBUG) { -+ printk("association: rates element\n"); -+ acx_dump_bytes(prate, p - prate); -+ } -+ -+ /* calculate lengths */ -+ packet_len = WLAN_HDR_A3_LEN + (p - body); -+ -+ log(L_ASSOC, "association: requesting caps 0x%04X, ESSID \"%s\"\n", -+ cap, adev->essid_for_assoc); -+ -+ acx_l_tx_data(adev, tx, packet_len); -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_transmit_disassoc -+** -+** FIXME: looks like incomplete implementation of a helper: -+** acx_l_transmit_disassoc(adev, clt) - kick this client (we're an AP) -+** acx_l_transmit_disassoc(adev, NULL) - leave BSSID (we're a STA) -+*/ -+#ifdef BROKEN -+int -+acx_l_transmit_disassoc(acx_device_t *adev, client_t *clt) -+{ -+ struct tx *tx; -+ struct wlan_hdr_mgmt *head; -+ struct disassoc_frame_body *body; -+ -+ FN_ENTER; -+/* if (clt != NULL) { */ -+ tx = acx_l_alloc_tx(adev); -+ if (!tx) -+ goto bad; -+ head = acx_l_get_txbuf(adev, tx); -+ if (!head) { -+ acx_l_dealloc_tx(adev, tx); -+ goto bad; -+ } -+ body = (void*)(head + 1); -+ -+/* clt->used = CLIENT_AUTHENTICATED_2; - not (yet?) associated */ -+ -+ head->fc = WF_FSTYPE_DISASSOCi; -+ head->dur = 0; -+ /* huh? It muchly depends on whether we're STA or AP... -+ ** sta->ap: da=bssid, sa=own, bssid=bssid -+ ** ap->sta: da=sta, sa=bssid, bssid=bssid. FIXME! */ -+ MAC_COPY(head->da, adev->bssid); -+ MAC_COPY(head->sa, adev->dev_addr); -+ MAC_COPY(head->bssid, adev->dev_addr); -+ head->seq = 0; -+ -+ /* "Class 3 frame received from nonassociated station." */ -+ body->reason = host2ieee16(7); -+ -+ /* fixed size struct, ok to sizeof */ -+ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + sizeof(*body)); -+/* } */ -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_s_complete_scan -+** -+** Called either from after_interrupt_task() if: -+** 1) there was Scan_Complete IRQ, or -+** 2) scanning expired in timer() -+** We need to decide which ESS or IBSS to join. -+** Iterates thru adev->sta_list: -+** if adev->ap is not bcast, will join only specified -+** ESS or IBSS with this bssid -+** checks peers' caps for ESS/IBSS bit -+** checks peers' SSID, allows exact match or hidden SSID -+** If station to join is chosen: -+** points adev->ap_client to the chosen struct client -+** sets adev->essid_for_assoc for future assoc attempt -+** Auth/assoc is not yet performed -+** Returns OK if there is no need to restart scan -+*/ -+int -+acx_s_complete_scan(acx_device_t *adev) -+{ -+ struct client *bss; -+ unsigned long flags; -+ u16 needed_cap; -+ int i; -+ int idx_found = -1; -+ int result = OK; -+ -+ FN_ENTER; -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ needed_cap = WF_MGMT_CAP_IBSS; /* 2, we require Ad-Hoc */ -+ break; -+ case ACX_MODE_2_STA: -+ needed_cap = WF_MGMT_CAP_ESS; /* 1, we require Managed */ -+ break; -+ default: -+ printk("acx: driver bug: mode=%d in complete_scan()\n", adev->mode); -+ dump_stack(); -+ goto end; -+ } -+ -+ acx_lock(adev, flags); -+ -+ /* TODO: sta_iterator hiding implementation would be nice here... */ -+ -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ bss = &adev->sta_list[i]; -+ if (!bss->used) continue; -+ -+ -+ log(L_ASSOC, "scan table: SSID=\"%s\" CH=%d SIR=%d SNR=%d\n", -+ bss->essid, bss->channel, bss->sir, bss->snr); -+ -+ if (!mac_is_bcast(adev->ap)) -+ if (!mac_is_equal(bss->bssid, adev->ap)) -+ continue; /* keep looking */ -+ -+ /* broken peer with no mode flags set? */ -+ if (unlikely(!(bss->cap_info & (WF_MGMT_CAP_ESS | WF_MGMT_CAP_IBSS)))) { -+ printk("%s: strange peer "MACSTR" found with " -+ "neither ESS (AP) nor IBSS (Ad-Hoc) " -+ "capability - skipped\n", -+ adev->ndev->name, MAC(bss->address)); -+ continue; -+ } -+ log(L_ASSOC, "peer_cap 0x%04X, needed_cap 0x%04X\n", -+ bss->cap_info, needed_cap); -+ -+ /* does peer station support what we need? */ -+ if ((bss->cap_info & needed_cap) != needed_cap) -+ continue; /* keep looking */ -+ -+ /* strange peer with NO basic rates?! */ -+ if (unlikely(!bss->rate_bas)) { -+ printk("%s: strange peer "MACSTR" with empty rate set " -+ "- skipped\n", -+ adev->ndev->name, MAC(bss->address)); -+ continue; -+ } -+ -+ /* do we support all basic rates of this peer? */ -+ if ((bss->rate_bas & adev->rate_oper) != bss->rate_bas) { -+/* we probably need to have all rates as operational rates, -+ even in case of an 11M-only configuration */ -+#ifdef THIS_IS_TROUBLESOME -+ printk("%s: peer "MACSTR": incompatible basic rates " -+ "(AP requests 0x%04X, we have 0x%04X) " -+ "- skipped\n", -+ adev->ndev->name, MAC(bss->address), -+ bss->rate_bas, adev->rate_oper); -+ continue; -+#else -+ printk("%s: peer "MACSTR": incompatible basic rates " -+ "(AP requests 0x%04X, we have 0x%04X). " -+ "Considering anyway...\n", -+ adev->ndev->name, MAC(bss->address), -+ bss->rate_bas, adev->rate_oper); -+#endif -+ } -+ -+ if ( !(adev->reg_dom_chanmask & (1<<(bss->channel-1))) ) { -+ printk("%s: warning: peer "MACSTR" is on channel %d " -+ "outside of channel range of current " -+ "regulatory domain - couldn't join " -+ "even if other settings match. " -+ "You might want to adapt your config\n", -+ adev->ndev->name, MAC(bss->address), -+ bss->channel); -+ continue; /* keep looking */ -+ } -+ -+ if (!adev->essid_active || !strcmp(bss->essid, adev->essid)) { -+ log(L_ASSOC, -+ "found station with matching ESSID! ('%s' " -+ "station, '%s' config)\n", -+ bss->essid, -+ (adev->essid_active) ? adev->essid : "[any]"); -+ /* TODO: continue looking for peer with better SNR */ -+ bss->used = CLIENT_JOIN_CANDIDATE; -+ idx_found = i; -+ -+ /* stop searching if this station is -+ * on the current channel, otherwise -+ * keep looking for an even better match */ -+ if (bss->channel == adev->channel) -+ break; -+ } else -+ if (is_hidden_essid(bss->essid)) { -+ /* hmm, station with empty or single-space SSID: -+ * using hidden SSID broadcast? -+ */ -+ /* This behaviour is broken: which AP from zillion -+ ** of APs with hidden SSID you'd try? -+ ** We should use Probe requests to get Probe responses -+ ** and check for real SSID (are those never hidden?) */ -+ bss->used = CLIENT_JOIN_CANDIDATE; -+ if (idx_found == -1) -+ idx_found = i; -+ log(L_ASSOC, "found station with empty or " -+ "single-space (hidden) SSID, considering " -+ "for assoc attempt\n"); -+ /* ...and keep looking for better matches */ -+ } else { -+ log(L_ASSOC, "ESSID doesn't match! ('%s' " -+ "station, '%s' config)\n", -+ bss->essid, -+ (adev->essid_active) ? adev->essid : "[any]"); -+ } -+ } -+ -+ /* TODO: iterate thru join candidates instead */ -+ /* TODO: rescan if not associated within some timeout */ -+ if (idx_found != -1) { -+ char *essid_src; -+ size_t essid_len; -+ -+ bss = &adev->sta_list[idx_found]; -+ adev->ap_client = bss; -+ -+ if (is_hidden_essid(bss->essid)) { -+ /* if the ESSID of the station we found is empty -+ * (no broadcast), then use user-configured ESSID -+ * instead */ -+ essid_src = adev->essid; -+ essid_len = adev->essid_len; -+ } else { -+ essid_src = bss->essid; -+ essid_len = strlen(bss->essid); -+ } -+ -+ acx_update_capabilities(adev); -+ -+ memcpy(adev->essid_for_assoc, essid_src, essid_len); -+ adev->essid_for_assoc[essid_len] = '\0'; -+ adev->channel = bss->channel; -+ MAC_COPY(adev->bssid, bss->bssid); -+ -+ bss->rate_cfg = (bss->rate_cap & adev->rate_oper); -+ bss->rate_cur = 1 << lowest_bit(bss->rate_cfg); -+ bss->rate_100 = acx_rate111to100(bss->rate_cur); -+ -+ acxlog_mac(L_ASSOC, -+ "matching station found: ", adev->bssid, ", joining\n"); -+ -+ /* TODO: do we need to switch to the peer's channel first? */ -+ -+ if (ACX_MODE_0_ADHOC == adev->mode) { -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ } else { -+ acx_l_transmit_authen1(adev); -+ acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH); -+ } -+ } else { /* idx_found == -1 */ -+ /* uh oh, no station found in range */ -+ if (ACX_MODE_0_ADHOC == adev->mode) { -+ printk("%s: no matching station found in range, " -+ "generating our own IBSS instead\n", -+ adev->ndev->name); -+ /* we do it the HostAP way: */ -+ MAC_COPY(adev->bssid, adev->dev_addr); -+ adev->bssid[0] |= 0x02; /* 'local assigned addr' bit */ -+ /* add IBSS bit to our caps... */ -+ acx_update_capabilities(adev); -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ /* In order to cmd_join be called below */ -+ idx_found = 0; -+ } else { -+ /* we shall scan again, AP can be -+ ** just temporarily powered off */ -+ log(L_ASSOC, -+ "no matching station found in range yet\n"); -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); -+ result = NOT_OK; -+ } -+ } -+ -+ acx_unlock(adev, flags); -+ -+ if (idx_found != -1) { -+ if (ACX_MODE_0_ADHOC == adev->mode) { -+ /* need to update channel in beacon template */ -+ SET_BIT(adev->set_mask, SET_TEMPLATES); -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) -+ acx_s_update_card_settings(adev); -+ } -+ /* Inform firmware on our decision to start or join BSS */ -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ } -+ -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_s_read_fw -+** -+** Loads a firmware image -+** -+** Returns: -+** 0 unable to load file -+** pointer to firmware success -+*/ -+firmware_image_t* -+acx_s_read_fw(struct device *dev, const char *file, u32 *size) -+{ -+ firmware_image_t *res; -+ const struct firmware *fw_entry; -+ -+ res = NULL; -+ log(L_INIT, "requesting firmware image '%s'\n", file); -+ if (!request_firmware(&fw_entry, file, dev)) { -+ *size = 8; -+ if (fw_entry->size >= 8) -+ *size = 8 + le32_to_cpu(*(u32 *)(fw_entry->data + 4)); -+ if (fw_entry->size != *size) { -+ printk("acx: firmware size does not match " -+ "firmware header: %d != %d, " -+ "aborting fw upload\n", -+ (int) fw_entry->size, (int) *size); -+ goto release_ret; -+ } -+ res = vmalloc(*size); -+ if (!res) { -+ printk("acx: no memory for firmware " -+ "(%u bytes)\n", *size); -+ goto release_ret; -+ } -+ memcpy(res, fw_entry->data, fw_entry->size); -+release_ret: -+ release_firmware(fw_entry); -+ return res; -+ } -+ printk("acx: firmware image '%s' was not provided. " -+ "Check your hotplug scripts\n", file); -+ -+ /* checksum will be verified in write_fw, so don't bother here */ -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acx_s_set_wepkey -+*/ -+static void -+acx100_s_set_wepkey(acx_device_t *adev) -+{ -+ ie_dot11WEPDefaultKey_t dk; -+ int i; -+ -+ for (i = 0; i < DOT11_MAX_DEFAULT_WEP_KEYS; i++) { -+ if (adev->wep_keys[i].size != 0) { -+ log(L_INIT, "setting WEP key: %d with " -+ "total size: %d\n", i, (int) adev->wep_keys[i].size); -+ dk.action = 1; -+ dk.keySize = adev->wep_keys[i].size; -+ dk.defaultKeyNum = i; -+ memcpy(dk.key, adev->wep_keys[i].key, dk.keySize); -+ acx_s_configure(adev, &dk, ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE); -+ } -+ } -+} -+ -+static void -+acx111_s_set_wepkey(acx_device_t *adev) -+{ -+ acx111WEPDefaultKey_t dk; -+ int i; -+ -+ for (i = 0; i < DOT11_MAX_DEFAULT_WEP_KEYS; i++) { -+ if (adev->wep_keys[i].size != 0) { -+ log(L_INIT, "setting WEP key: %d with " -+ "total size: %d\n", i, (int) adev->wep_keys[i].size); -+ memset(&dk, 0, sizeof(dk)); -+ dk.action = cpu_to_le16(1); /* "add key"; yes, that's a 16bit value */ -+ dk.keySize = adev->wep_keys[i].size; -+ -+ /* are these two lines necessary? */ -+ dk.type = 0; /* default WEP key */ -+ dk.index = 0; /* ignored when setting default key */ -+ -+ dk.defaultKeyNum = i; -+ memcpy(dk.key, adev->wep_keys[i].key, dk.keySize); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WEP_MGMT, &dk, sizeof(dk)); -+ } -+ } -+} -+ -+static void -+acx_s_set_wepkey(acx_device_t *adev) -+{ -+ if (IS_ACX111(adev)) -+ acx111_s_set_wepkey(adev); -+ else -+ acx100_s_set_wepkey(adev); -+} -+ -+ -+/*********************************************************************** -+** acx100_s_init_wep -+** -+** FIXME: this should probably be moved into the new card settings -+** management, but since we're also modifying the memory map layout here -+** due to the WEP key space we want, we should take care... -+*/ -+static int -+acx100_s_init_wep(acx_device_t *adev) -+{ -+ acx100_ie_wep_options_t options; -+ ie_dot11WEPDefaultKeyID_t dk; -+ acx_ie_memmap_t pt; -+ int res = NOT_OK; -+ -+ FN_ENTER; -+ -+ if (OK != acx_s_interrogate(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { -+ goto fail; -+ } -+ -+ log(L_DEBUG, "CodeEnd:%X\n", pt.CodeEnd); -+ -+ pt.WEPCacheStart = cpu_to_le32(le32_to_cpu(pt.CodeEnd) + 0x4); -+ pt.WEPCacheEnd = cpu_to_le32(le32_to_cpu(pt.CodeEnd) + 0x4); -+ -+ if (OK != acx_s_configure(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { -+ goto fail; -+ } -+ -+ /* let's choose maximum setting: 4 default keys, plus 10 other keys: */ -+ options.NumKeys = cpu_to_le16(DOT11_MAX_DEFAULT_WEP_KEYS + 10); -+ options.WEPOption = 0x00; -+ -+ log(L_ASSOC, "%s: writing WEP options\n", __func__); -+ acx_s_configure(adev, &options, ACX100_IE_WEP_OPTIONS); -+ -+ acx100_s_set_wepkey(adev); -+ -+ if (adev->wep_keys[adev->wep_current_index].size != 0) { -+ log(L_ASSOC, "setting active default WEP key number: %d\n", -+ adev->wep_current_index); -+ dk.KeyID = adev->wep_current_index; -+ acx_s_configure(adev, &dk, ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET); /* 0x1010 */ -+ } -+ /* FIXME!!! wep_key_struct is filled nowhere! But adev -+ * is initialized to 0, and we don't REALLY need those keys either */ -+/* for (i = 0; i < 10; i++) { -+ if (adev->wep_key_struct[i].len != 0) { -+ MAC_COPY(wep_mgmt.MacAddr, adev->wep_key_struct[i].addr); -+ wep_mgmt.KeySize = cpu_to_le16(adev->wep_key_struct[i].len); -+ memcpy(&wep_mgmt.Key, adev->wep_key_struct[i].key, le16_to_cpu(wep_mgmt.KeySize)); -+ wep_mgmt.Action = cpu_to_le16(1); -+ log(L_ASSOC, "writing WEP key %d (len %d)\n", i, le16_to_cpu(wep_mgmt.KeySize)); -+ if (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_WEP_MGMT, &wep_mgmt, sizeof(wep_mgmt))) { -+ adev->wep_key_struct[i].index = i; -+ } -+ } -+ } -+*/ -+ -+ /* now retrieve the updated WEPCacheEnd pointer... */ -+ if (OK != acx_s_interrogate(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { -+ printk("%s: ACX1xx_IE_MEMORY_MAP read #2 FAILED\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ /* ...and tell it to start allocating templates at that location */ -+ /* (no endianness conversion needed) */ -+ pt.PacketTemplateStart = pt.WEPCacheEnd; -+ -+ if (OK != acx_s_configure(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { -+ printk("%s: ACX1xx_IE_MEMORY_MAP write #2 FAILED\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ res = OK; -+ -+fail: -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+static int -+acx_s_init_max_template_generic(acx_device_t *adev, unsigned int len, unsigned int cmd) -+{ -+ int res; -+ union { -+ acx_template_nullframe_t null; -+ acx_template_beacon_t b; -+ acx_template_tim_t tim; -+ acx_template_probereq_t preq; -+ acx_template_proberesp_t presp; -+ } templ; -+ -+ memset(&templ, 0, len); -+ templ.null.size = cpu_to_le16(len - 2); -+ res = acx_s_issue_cmd(adev, cmd, &templ, len); -+ return res; -+} -+ -+static inline int -+acx_s_init_max_null_data_template(acx_device_t *adev) -+{ -+ return acx_s_init_max_template_generic( -+ adev, sizeof(acx_template_nullframe_t), ACX1xx_CMD_CONFIG_NULL_DATA -+ ); -+} -+ -+static inline int -+acx_s_init_max_beacon_template(acx_device_t *adev) -+{ -+ return acx_s_init_max_template_generic( -+ adev, sizeof(acx_template_beacon_t), ACX1xx_CMD_CONFIG_BEACON -+ ); -+} -+ -+static inline int -+acx_s_init_max_tim_template(acx_device_t *adev) -+{ -+ return acx_s_init_max_template_generic( -+ adev, sizeof(acx_template_tim_t), ACX1xx_CMD_CONFIG_TIM -+ ); -+} -+ -+static inline int -+acx_s_init_max_probe_response_template(acx_device_t *adev) -+{ -+ return acx_s_init_max_template_generic( -+ adev, sizeof(acx_template_proberesp_t), ACX1xx_CMD_CONFIG_PROBE_RESPONSE -+ ); -+} -+ -+static inline int -+acx_s_init_max_probe_request_template(acx_device_t *adev) -+{ -+ return acx_s_init_max_template_generic( -+ adev, sizeof(acx_template_probereq_t), ACX1xx_CMD_CONFIG_PROBE_REQUEST -+ ); -+} -+ -+/*********************************************************************** -+** acx_s_set_tim_template -+** -+** FIXME: In full blown driver we will regularly update partial virtual bitmap -+** by calling this function -+** (it can be done by irq handler on each DTIM irq or by timer...) -+ -+[802.11 7.3.2.6] TIM information element: -+- 1 EID -+- 1 Length -+1 1 DTIM Count -+ indicates how many beacons (including this) appear before next DTIM -+ (0=this one is a DTIM) -+2 1 DTIM Period -+ number of beacons between successive DTIMs -+ (0=reserved, 1=all TIMs are DTIMs, 2=every other, etc) -+3 1 Bitmap Control -+ bit0: Traffic Indicator bit associated with Assoc ID 0 (Bcast AID?) -+ set to 1 in TIM elements with a value of 0 in the DTIM Count field -+ when one or more broadcast or multicast frames are buffered at the AP. -+ bit1-7: Bitmap Offset (logically Bitmap_Offset = Bitmap_Control & 0xFE). -+4 n Partial Virtual Bitmap -+ Visible part of traffic-indication bitmap. -+ Full bitmap consists of 2008 bits (251 octets) such that bit number N -+ (0<=N<=2007) in the bitmap corresponds to bit number (N mod 8) -+ in octet number N/8 where the low-order bit of each octet is bit0, -+ and the high order bit is bit7. -+ Each set bit in virtual bitmap corresponds to traffic buffered by AP -+ for a specific station (with corresponding AID?). -+ Partial Virtual Bitmap shows a part of bitmap which has non-zero. -+ Bitmap Offset is a number of skipped zero octets (see above). -+ 'Missing' octets at the tail are also assumed to be zero. -+ Example: Length=6, Bitmap_Offset=2, Partial_Virtual_Bitmap=55 55 55 -+ This means that traffic-indication bitmap is: -+ 00000000 00000000 01010101 01010101 01010101 00000000 00000000... -+ (is bit0 in the map is always 0 and real value is in Bitmap Control bit0?) -+*/ -+static int -+acx_s_set_tim_template(acx_device_t *adev) -+{ -+/* For now, configure smallish test bitmap, all zero ("no pending data") */ -+ enum { bitmap_size = 5 }; -+ -+ acx_template_tim_t t; -+ int result; -+ -+ FN_ENTER; -+ -+ memset(&t, 0, sizeof(t)); -+ t.size = 5 + bitmap_size; /* eid+len+count+period+bmap_ctrl + bmap */ -+ t.tim_eid = WLAN_EID_TIM; -+ t.len = 3 + bitmap_size; /* count+period+bmap_ctrl + bmap */ -+ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_TIM, &t, sizeof(t)); -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_fill_beacon_or_proberesp_template -+** -+** For frame format info, please see 802.11-1999.pdf item 7.2.3.9 and below!! -+** -+** NB: we use the fact that -+** struct acx_template_proberesp and struct acx_template_beacon are the same -+** (well, almost...) -+** -+** [802.11] Beacon's body consist of these IEs: -+** 1 Timestamp -+** 2 Beacon interval -+** 3 Capability information -+** 4 SSID -+** 5 Supported rates (up to 8 rates) -+** 6 FH Parameter Set (frequency-hopping PHYs only) -+** 7 DS Parameter Set (direct sequence PHYs only) -+** 8 CF Parameter Set (only if PCF is supported) -+** 9 IBSS Parameter Set (ad-hoc only) -+** -+** Beacon only: -+** 10 TIM (AP only) (see 802.11 7.3.2.6) -+** 11 Country Information (802.11d) -+** 12 FH Parameters (802.11d) -+** 13 FH Pattern Table (802.11d) -+** ... (?!! did not yet find relevant PDF file... --vda) -+** 19 ERP Information (extended rate PHYs) -+** 20 Extended Supported Rates (if more than 8 rates) -+** -+** Proberesp only: -+** 10 Country information (802.11d) -+** 11 FH Parameters (802.11d) -+** 12 FH Pattern Table (802.11d) -+** 13-n Requested information elements (802.11d) -+** ???? -+** 18 ERP Information (extended rate PHYs) -+** 19 Extended Supported Rates (if more than 8 rates) -+*/ -+static int -+acx_fill_beacon_or_proberesp_template(acx_device_t *adev, -+ struct acx_template_beacon *templ, -+ u16 fc /* in host order! */) -+{ -+ int len; -+ u8 *p; -+ -+ FN_ENTER; -+ -+ memset(templ, 0, sizeof(*templ)); -+ MAC_BCAST(templ->da); -+ MAC_COPY(templ->sa, adev->dev_addr); -+ MAC_COPY(templ->bssid, adev->bssid); -+ -+ templ->beacon_interval = cpu_to_le16(adev->beacon_interval); -+ acx_update_capabilities(adev); -+ templ->cap = cpu_to_le16(adev->capabilities); -+ -+ p = templ->variable; -+ p = wlan_fill_ie_ssid(p, adev->essid_len, adev->essid); -+ p = wlan_fill_ie_rates(p, adev->rate_supported_len, adev->rate_supported); -+ p = wlan_fill_ie_ds_parms(p, adev->channel); -+ /* NB: should go AFTER tim, but acx seem to keep tim last always */ -+ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, adev->rate_supported); -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ /* ATIM window */ -+ p = wlan_fill_ie_ibss_parms(p, 0); break; -+ case ACX_MODE_3_AP: -+ /* TIM IE is set up as separate template */ -+ break; -+ } -+ -+ len = p - (u8*)templ; -+ templ->fc = cpu_to_le16(WF_FTYPE_MGMT | fc); -+ /* - 2: do not count 'u16 size' field */ -+ templ->size = cpu_to_le16(len - 2); -+ -+ FN_EXIT1(len); -+ return len; -+} -+ -+ -+#if POWER_SAVE_80211 -+/*********************************************************************** -+** acx_s_set_null_data_template -+*/ -+static int -+acx_s_set_null_data_template(acx_device_t *adev) -+{ -+ struct acx_template_nullframe b; -+ int result; -+ -+ FN_ENTER; -+ -+ /* memset(&b, 0, sizeof(b)); not needed, setting all members */ -+ -+ b.size = cpu_to_le16(sizeof(b) - 2); -+ b.hdr.fc = WF_FTYPE_MGMTi | WF_FSTYPE_NULLi; -+ b.hdr.dur = 0; -+ MAC_BCAST(b.hdr.a1); -+ MAC_COPY(b.hdr.a2, adev->dev_addr); -+ MAC_COPY(b.hdr.a3, adev->bssid); -+ b.hdr.seq = 0; -+ -+ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_NULL_DATA, &b, sizeof(b)); -+ -+ FN_EXIT1(result); -+ return result; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_s_set_beacon_template -+*/ -+static int -+acx_s_set_beacon_template(acx_device_t *adev) -+{ -+ struct acx_template_beacon bcn; -+ int len, result; -+ -+ FN_ENTER; -+ -+ len = acx_fill_beacon_or_proberesp_template(adev, &bcn, WF_FSTYPE_BEACON); -+ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_BEACON, &bcn, len); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_s_set_probe_response_template -+*/ -+static int -+acx_s_set_probe_response_template(acx_device_t *adev) -+{ -+ struct acx_template_proberesp pr; -+ int len, result; -+ -+ FN_ENTER; -+ -+ len = acx_fill_beacon_or_proberesp_template(adev, &pr, WF_FSTYPE_PROBERESP); -+ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_PROBE_RESPONSE, &pr, len); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_s_init_packet_templates() -+** -+** NOTE: order is very important here, to have a correct memory layout! -+** init templates: max Probe Request (station mode), max NULL data, -+** max Beacon, max TIM, max Probe Response. -+*/ -+static int -+acx_s_init_packet_templates(acx_device_t *adev) -+{ -+ acx_ie_memmap_t mm; /* ACX100 only */ -+ int result = NOT_OK; -+ -+ FN_ENTER; -+ -+ log(L_DEBUG|L_INIT, "initializing max packet templates\n"); -+ -+ if (OK != acx_s_init_max_probe_request_template(adev)) -+ goto failed; -+ -+ if (OK != acx_s_init_max_null_data_template(adev)) -+ goto failed; -+ -+ if (OK != acx_s_init_max_beacon_template(adev)) -+ goto failed; -+ -+ if (OK != acx_s_init_max_tim_template(adev)) -+ goto failed; -+ -+ if (OK != acx_s_init_max_probe_response_template(adev)) -+ goto failed; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111 doesn't need the memory map magic below, -+ * and the other templates will be set later (acx_start) */ -+ result = OK; -+ goto success; -+ } -+ -+ /* ACX100 will have its TIM template set, -+ * and we also need to update the memory map */ -+ -+ if (OK != acx_s_set_tim_template(adev)) -+ goto failed_acx100; -+ -+ log(L_DEBUG, "sizeof(memmap)=%d bytes\n", (int)sizeof(mm)); -+ -+ if (OK != acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP)) -+ goto failed_acx100; -+ -+ mm.QueueStart = cpu_to_le32(le32_to_cpu(mm.PacketTemplateEnd) + 4); -+ if (OK != acx_s_configure(adev, &mm, ACX1xx_IE_MEMORY_MAP)) -+ goto failed_acx100; -+ -+ result = OK; -+ goto success; -+ -+failed_acx100: -+ log(L_DEBUG|L_INIT, -+ /* "cb=0x%X\n" */ -+ "ACXMemoryMap:\n" -+ ".CodeStart=0x%X\n" -+ ".CodeEnd=0x%X\n" -+ ".WEPCacheStart=0x%X\n" -+ ".WEPCacheEnd=0x%X\n" -+ ".PacketTemplateStart=0x%X\n" -+ ".PacketTemplateEnd=0x%X\n", -+ /* len, */ -+ le32_to_cpu(mm.CodeStart), -+ le32_to_cpu(mm.CodeEnd), -+ le32_to_cpu(mm.WEPCacheStart), -+ le32_to_cpu(mm.WEPCacheEnd), -+ le32_to_cpu(mm.PacketTemplateStart), -+ le32_to_cpu(mm.PacketTemplateEnd)); -+ -+failed: -+ printk("%s: %s() FAILED\n", adev->ndev->name, __func__); -+ -+success: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_s_set_probe_request_template(acx_device_t *adev) -+{ -+ struct acx_template_probereq probereq; -+ char *p; -+ int res; -+ int frame_len; -+ -+ FN_ENTER; -+ -+ memset(&probereq, 0, sizeof(probereq)); -+ -+ probereq.fc = WF_FTYPE_MGMTi | WF_FSTYPE_PROBEREQi; -+ MAC_BCAST(probereq.da); -+ MAC_COPY(probereq.sa, adev->dev_addr); -+ MAC_BCAST(probereq.bssid); -+ -+ p = probereq.variable; -+ p = wlan_fill_ie_ssid(p, adev->essid_len, adev->essid); -+ p = wlan_fill_ie_rates(p, adev->rate_supported_len, adev->rate_supported); -+ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, adev->rate_supported); -+ frame_len = p - (char*)&probereq; -+ probereq.size = cpu_to_le16(frame_len - 2); -+ -+ res = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_PROBE_REQUEST, &probereq, frame_len); -+ FN_EXIT0; -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acx_s_init_mac -+*/ -+int -+acx_s_init_mac(acx_device_t *adev) -+{ -+ int result = NOT_OK; -+ -+ FN_ENTER; -+ -+ if (IS_ACX111(adev)) { -+ adev->ie_len = acx111_ie_len; -+ adev->ie_len_dot11 = acx111_ie_len_dot11; -+ } else { -+ adev->ie_len = acx100_ie_len; -+ adev->ie_len_dot11 = acx100_ie_len_dot11; -+ } -+ -+#if defined (ACX_MEM) -+ adev->memblocksize = 256; /* 256 is default */ -+ /* try to load radio for both ACX100 and ACX111, since both -+ * chips have at least some firmware versions making use of an -+ * external radio module */ -+ acxmem_s_upload_radio(adev); -+#else -+ if (IS_PCI(adev)) { -+ adev->memblocksize = 256; /* 256 is default */ -+ /* try to load radio for both ACX100 and ACX111, since both -+ * chips have at least some firmware versions making use of an -+ * external radio module */ -+ acxpci_s_upload_radio(adev); -+ } else { -+ adev->memblocksize = 128; -+ } -+#endif -+ -+ if (IS_ACX111(adev)) { -+ /* for ACX111, the order is different from ACX100 -+ 1. init packet templates -+ 2. create station context and create dma regions -+ 3. init wep default keys -+ */ -+ if (OK != acx_s_init_packet_templates(adev)) -+ goto fail; -+ if (OK != acx111_s_create_dma_regions(adev)) { -+ printk("%s: acx111_create_dma_regions FAILED\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ } else { -+ if (OK != acx100_s_init_wep(adev)) -+ goto fail; -+ if (OK != acx_s_init_packet_templates(adev)) -+ goto fail; -+ if (OK != acx100_s_create_dma_regions(adev)) { -+ printk("%s: acx100_create_dma_regions FAILED\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ } -+ -+ MAC_COPY(adev->ndev->dev_addr, adev->dev_addr); -+ result = OK; -+ -+fail: -+ if (result) -+ printk("acx: init_mac() FAILED\n"); -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+void -+acx_s_set_sane_reg_domain(acx_device_t *adev, int do_set) -+{ -+ unsigned mask; -+ -+ unsigned int i; -+ -+ for (i = 0; i < sizeof(acx_reg_domain_ids); i++) -+ if (acx_reg_domain_ids[i] == adev->reg_dom_id) -+ break; -+ -+ if (sizeof(acx_reg_domain_ids) == i) { -+ log(L_INIT, "Invalid or unsupported regulatory domain" -+ " 0x%02X specified, falling back to FCC (USA)!" -+ " Please report if this sounds fishy!\n", -+ adev->reg_dom_id); -+ i = 0; -+ adev->reg_dom_id = acx_reg_domain_ids[i]; -+ -+ /* since there was a mismatch, we need to force updating */ -+ do_set = 1; -+ } -+ -+ if (do_set) { -+ acx_ie_generic_t dom; -+ dom.m.bytes[0] = adev->reg_dom_id; -+ acx_s_configure(adev, &dom, ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN); -+ } -+ -+ adev->reg_dom_chanmask = reg_domain_channel_masks[i]; -+ -+ mask = (1 << (adev->channel - 1)); -+ if (!(adev->reg_dom_chanmask & mask)) { -+ /* hmm, need to adjust our channel to reside within domain */ -+ mask = 1; -+ for (i = 1; i <= 14; i++) { -+ if (adev->reg_dom_chanmask & mask) { -+ printk("%s: adjusting selected channel from %d " -+ "to %d due to new regulatory domain\n", -+ adev->ndev->name, adev->channel, i); -+ adev->channel = i; -+ break; -+ } -+ mask <<= 1; -+ } -+ } -+} -+ -+ -+#if POWER_SAVE_80211 -+static void -+acx_s_update_80211_powersave_mode(acx_device_t *adev) -+{ -+ /* merge both structs in a union to be able to have common code */ -+ union { -+ acx111_ie_powersave_t acx111; -+ acx100_ie_powersave_t acx100; -+ } pm; -+ -+ /* change 802.11 power save mode settings */ -+ log(L_INIT, "updating 802.11 power save mode settings: " -+ "wakeup_cfg 0x%02X, listen interval %u, " -+ "options 0x%02X, hangover period %u, " -+ "enhanced_ps_transition_time %u\n", -+ adev->ps_wakeup_cfg, adev->ps_listen_interval, -+ adev->ps_options, adev->ps_hangover_period, -+ adev->ps_enhanced_transition_time); -+ acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT); -+ log(L_INIT, "Previous PS mode settings: wakeup_cfg 0x%02X, " -+ "listen interval %u, options 0x%02X, " -+ "hangover period %u, " -+ "enhanced_ps_transition_time %u, beacon_rx_time %u\n", -+ pm.acx111.wakeup_cfg, -+ pm.acx111.listen_interval, -+ pm.acx111.options, -+ pm.acx111.hangover_period, -+ IS_ACX111(adev) ? -+ pm.acx111.enhanced_ps_transition_time -+ : pm.acx100.enhanced_ps_transition_time, -+ IS_ACX111(adev) ? -+ pm.acx111.beacon_rx_time -+ : (u32)-1 -+ ); -+ pm.acx111.wakeup_cfg = adev->ps_wakeup_cfg; -+ pm.acx111.listen_interval = adev->ps_listen_interval; -+ pm.acx111.options = adev->ps_options; -+ pm.acx111.hangover_period = adev->ps_hangover_period; -+ if (IS_ACX111(adev)) { -+ pm.acx111.beacon_rx_time = cpu_to_le32(adev->ps_beacon_rx_time); -+ pm.acx111.enhanced_ps_transition_time = cpu_to_le32(adev->ps_enhanced_transition_time); -+ } else { -+ pm.acx100.enhanced_ps_transition_time = cpu_to_le16(adev->ps_enhanced_transition_time); -+ } -+ acx_s_configure(adev, &pm, ACX1xx_IE_POWER_MGMT); -+ acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT); -+ log(L_INIT, "wakeup_cfg: 0x%02X\n", pm.acx111.wakeup_cfg); -+ acx_s_msleep(40); -+ acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT); -+ log(L_INIT, "wakeup_cfg: 0x%02X\n", pm.acx111.wakeup_cfg); -+ log(L_INIT, "power save mode change %s\n", -+ (pm.acx111.wakeup_cfg & PS_CFG_PENDING) ? "FAILED" : "was successful"); -+ /* FIXME: maybe verify via PS_CFG_PENDING bit here -+ * that power save mode change was successful. */ -+ /* FIXME: we shouldn't trigger a scan immediately after -+ * fiddling with power save mode (since the firmware is sending -+ * a NULL frame then). */ -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_s_update_card_settings -+** -+** Applies accumulated changes in various adev->xxxx members -+** Called by ioctl commit handler, acx_start, acx_set_defaults, -+** acx_s_after_interrupt_task (if IRQ_CMD_UPDATE_CARD_CFG), -+*/ -+static void -+acx111_s_sens_radio_16_17(acx_device_t *adev) -+{ -+ u32 feature1, feature2; -+ -+ if ((adev->sensitivity < 1) || (adev->sensitivity > 3)) { -+ printk("%s: invalid sensitivity setting (1..3), " -+ "setting to 1\n", adev->ndev->name); -+ adev->sensitivity = 1; -+ } -+ acx111_s_get_feature_config(adev, &feature1, &feature2); -+ CLEAR_BIT(feature1, FEATURE1_LOW_RX|FEATURE1_EXTRA_LOW_RX); -+ if (adev->sensitivity > 1) -+ SET_BIT(feature1, FEATURE1_LOW_RX); -+ if (adev->sensitivity > 2) -+ SET_BIT(feature1, FEATURE1_EXTRA_LOW_RX); -+ acx111_s_feature_set(adev, feature1, feature2); -+} -+ -+ -+void -+acx_s_update_card_settings(acx_device_t *adev) -+{ -+ unsigned long flags; -+ unsigned int start_scan = 0; -+ int i; -+ -+ FN_ENTER; -+ -+ log(L_INIT, "get_mask 0x%08X, set_mask 0x%08X\n", -+ adev->get_mask, adev->set_mask); -+ -+ /* Track dependencies betweed various settings */ -+ -+ if (adev->set_mask & (GETSET_MODE|GETSET_RESCAN|GETSET_WEP)) { -+ log(L_INIT, "important setting has been changed. " -+ "Need to update packet templates, too\n"); -+ SET_BIT(adev->set_mask, SET_TEMPLATES); -+ } -+ if (adev->set_mask & GETSET_CHANNEL) { -+ /* This will actually tune RX/TX to the channel */ -+ SET_BIT(adev->set_mask, GETSET_RX|GETSET_TX); -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ /* Beacons contain channel# - update them */ -+ SET_BIT(adev->set_mask, SET_TEMPLATES); -+ } -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ start_scan = 1; -+ } -+ } -+ -+ /* Apply settings */ -+ -+#ifdef WHY_SHOULD_WE_BOTHER /* imagine we were just powered off */ -+ /* send a disassoc request in case it's required */ -+ if (adev->set_mask & (GETSET_MODE|GETSET_RESCAN|GETSET_CHANNEL|GETSET_WEP)) { -+ if (ACX_MODE_2_STA == adev->mode) { -+ if (ACX_STATUS_4_ASSOCIATED == adev->status) { -+ log(L_ASSOC, "we were ASSOCIATED - " -+ "sending disassoc request\n"); -+ acx_lock(adev, flags); -+ acx_l_transmit_disassoc(adev, NULL); -+ /* FIXME: deauth? */ -+ acx_unlock(adev, flags); -+ } -+ /* need to reset some other stuff as well */ -+ log(L_DEBUG, "resetting bssid\n"); -+ MAC_ZERO(adev->bssid); -+ SET_BIT(adev->set_mask, SET_TEMPLATES|SET_STA_LIST); -+ start_scan = 1; -+ } -+ } -+#endif -+ -+ if (adev->get_mask & GETSET_STATION_ID) { -+ u8 stationID[4 + ACX1xx_IE_DOT11_STATION_ID_LEN]; -+ const u8 *paddr; -+ -+ acx_s_interrogate(adev, &stationID, ACX1xx_IE_DOT11_STATION_ID); -+ paddr = &stationID[4]; -+ for (i = 0; i < ETH_ALEN; i++) { -+ /* we copy the MAC address (reversed in -+ * the card) to the netdevice's MAC -+ * address, and on ifup it will be -+ * copied into iwadev->dev_addr */ -+ adev->ndev->dev_addr[ETH_ALEN - 1 - i] = paddr[i]; -+ } -+ CLEAR_BIT(adev->get_mask, GETSET_STATION_ID); -+ } -+ -+ if (adev->get_mask & GETSET_SENSITIVITY) { -+ if ((RADIO_RFMD_11 == adev->radio_type) -+ || (RADIO_MAXIM_0D == adev->radio_type) -+ || (RADIO_RALINK_15 == adev->radio_type)) { -+ acx_s_read_phy_reg(adev, 0x30, &adev->sensitivity); -+ } else { -+ log(L_INIT, "don't know how to get sensitivity " -+ "for radio type 0x%02X\n", adev->radio_type); -+ adev->sensitivity = 0; -+ } -+ log(L_INIT, "got sensitivity value %u\n", adev->sensitivity); -+ -+ CLEAR_BIT(adev->get_mask, GETSET_SENSITIVITY); -+ } -+ -+ if (adev->get_mask & GETSET_ANTENNA) { -+ u8 antenna[4 + ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN]; -+ -+ memset(antenna, 0, sizeof(antenna)); -+ acx_s_interrogate(adev, antenna, ACX1xx_IE_DOT11_CURRENT_ANTENNA); -+ adev->antenna = antenna[4]; -+ log(L_INIT, "got antenna value 0x%02X\n", adev->antenna); -+ CLEAR_BIT(adev->get_mask, GETSET_ANTENNA); -+ } -+ -+ if (adev->get_mask & GETSET_ED_THRESH) { -+ if (IS_ACX100(adev)) { -+ u8 ed_threshold[4 + ACX100_IE_DOT11_ED_THRESHOLD_LEN]; -+ -+ memset(ed_threshold, 0, sizeof(ed_threshold)); -+ acx_s_interrogate(adev, ed_threshold, ACX100_IE_DOT11_ED_THRESHOLD); -+ adev->ed_threshold = ed_threshold[4]; -+ } else { -+ log(L_INIT, "acx111 doesn't support ED\n"); -+ adev->ed_threshold = 0; -+ } -+ log(L_INIT, "got Energy Detect (ED) threshold %u\n", adev->ed_threshold); -+ CLEAR_BIT(adev->get_mask, GETSET_ED_THRESH); -+ } -+ -+ if (adev->get_mask & GETSET_CCA) { -+ if (IS_ACX100(adev)) { -+ u8 cca[4 + ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN]; -+ -+ memset(cca, 0, sizeof(adev->cca)); -+ acx_s_interrogate(adev, cca, ACX1xx_IE_DOT11_CURRENT_CCA_MODE); -+ adev->cca = cca[4]; -+ } else { -+ log(L_INIT, "acx111 doesn't support CCA\n"); -+ adev->cca = 0; -+ } -+ log(L_INIT, "got Channel Clear Assessment (CCA) value %u\n", adev->cca); -+ CLEAR_BIT(adev->get_mask, GETSET_CCA); -+ } -+ -+ if (adev->get_mask & GETSET_REG_DOMAIN) { -+ acx_ie_generic_t dom; -+ -+ acx_s_interrogate(adev, &dom, ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN); -+ adev->reg_dom_id = dom.m.bytes[0]; -+ acx_s_set_sane_reg_domain(adev, 0); -+ log(L_INIT, "got regulatory domain 0x%02X\n", adev->reg_dom_id); -+ CLEAR_BIT(adev->get_mask, GETSET_REG_DOMAIN); -+ } -+ -+ if (adev->set_mask & GETSET_STATION_ID) { -+ u8 stationID[4 + ACX1xx_IE_DOT11_STATION_ID_LEN]; -+ u8 *paddr; -+ -+ paddr = &stationID[4]; -+ memcpy(adev->dev_addr, adev->ndev->dev_addr, ETH_ALEN); -+ for (i = 0; i < ETH_ALEN; i++) { -+ /* copy the MAC address we obtained when we noticed -+ * that the ethernet iface's MAC changed -+ * to the card (reversed in -+ * the card!) */ -+ paddr[i] = adev->dev_addr[ETH_ALEN - 1 - i]; -+ } -+ acx_s_configure(adev, &stationID, ACX1xx_IE_DOT11_STATION_ID); -+ CLEAR_BIT(adev->set_mask, GETSET_STATION_ID); -+ } -+ -+ if (adev->set_mask & SET_TEMPLATES) { -+ log(L_INIT, "updating packet templates\n"); -+ switch (adev->mode) { -+ case ACX_MODE_2_STA: -+ acx_s_set_probe_request_template(adev); -+#if POWER_SAVE_80211 -+ acx_s_set_null_data_template(adev); -+#endif -+ break; -+ case ACX_MODE_0_ADHOC: -+ acx_s_set_probe_request_template(adev); -+#if POWER_SAVE_80211 -+ /* maybe power save functionality is somehow possible -+ * for Ad-Hoc mode, too... FIXME: verify it somehow? firmware debug fields? */ -+ acx_s_set_null_data_template(adev); -+#endif -+ /* fall through */ -+ case ACX_MODE_3_AP: -+ acx_s_set_beacon_template(adev); -+ acx_s_set_tim_template(adev); -+ /* BTW acx111 firmware would not send probe responses -+ ** if probe request does not have all basic rates flagged -+ ** by 0x80! Thus firmware does not conform to 802.11, -+ ** it should ignore 0x80 bit in ratevector from STA. -+ ** We can 'fix' it by not using this template and -+ ** sending probe responses by hand. TODO --vda */ -+ acx_s_set_probe_response_template(adev); -+ } -+ /* Needed if generated frames are to be emitted at different tx rate now */ -+ log(L_IRQ, "redoing cmd_join_bssid() after template cfg\n"); -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ CLEAR_BIT(adev->set_mask, SET_TEMPLATES); -+ } -+ if (adev->set_mask & SET_STA_LIST) { -+ acx_lock(adev, flags); -+ acx_l_sta_list_init(adev); -+ CLEAR_BIT(adev->set_mask, SET_STA_LIST); -+ acx_unlock(adev, flags); -+ } -+ if (adev->set_mask & SET_RATE_FALLBACK) { -+ u8 rate[4 + ACX1xx_IE_RATE_FALLBACK_LEN]; -+ -+ /* configure to not do fallbacks when not in auto rate mode */ -+ rate[4] = (adev->rate_auto) ? /* adev->txrate_fallback_retries */ 1 : 0; -+ log(L_INIT, "updating Tx fallback to %u retries\n", rate[4]); -+ acx_s_configure(adev, &rate, ACX1xx_IE_RATE_FALLBACK); -+ CLEAR_BIT(adev->set_mask, SET_RATE_FALLBACK); -+ } -+ if (adev->set_mask & GETSET_TXPOWER) { -+ log(L_INIT, "updating transmit power: %u dBm\n", -+ adev->tx_level_dbm); -+ acx_s_set_tx_level(adev, adev->tx_level_dbm); -+ CLEAR_BIT(adev->set_mask, GETSET_TXPOWER); -+ } -+ -+ if (adev->set_mask & GETSET_SENSITIVITY) { -+ log(L_INIT, "updating sensitivity value: %u\n", -+ adev->sensitivity); -+ switch (adev->radio_type) { -+ case RADIO_RFMD_11: -+ case RADIO_MAXIM_0D: -+ case RADIO_RALINK_15: -+ acx_s_write_phy_reg(adev, 0x30, adev->sensitivity); -+ break; -+ case RADIO_RADIA_16: -+ case RADIO_UNKNOWN_17: -+ acx111_s_sens_radio_16_17(adev); -+ break; -+ default: -+ log(L_INIT, "don't know how to modify sensitivity " -+ "for radio type 0x%02X\n", adev->radio_type); -+ } -+ CLEAR_BIT(adev->set_mask, GETSET_SENSITIVITY); -+ } -+ -+ if (adev->set_mask & GETSET_ANTENNA) { -+ /* antenna */ -+ u8 antenna[4 + ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN]; -+ -+ memset(antenna, 0, sizeof(antenna)); -+ antenna[4] = adev->antenna; -+ log(L_INIT, "updating antenna value: 0x%02X\n", -+ adev->antenna); -+ acx_s_configure(adev, &antenna, ACX1xx_IE_DOT11_CURRENT_ANTENNA); -+ CLEAR_BIT(adev->set_mask, GETSET_ANTENNA); -+ } -+ -+ if (adev->set_mask & GETSET_ED_THRESH) { -+ /* ed_threshold */ -+ log(L_INIT, "updating Energy Detect (ED) threshold: %u\n", -+ adev->ed_threshold); -+ if (IS_ACX100(adev)) { -+ u8 ed_threshold[4 + ACX100_IE_DOT11_ED_THRESHOLD_LEN]; -+ -+ memset(ed_threshold, 0, sizeof(ed_threshold)); -+ ed_threshold[4] = adev->ed_threshold; -+ acx_s_configure(adev, &ed_threshold, ACX100_IE_DOT11_ED_THRESHOLD); -+ } -+ else -+ log(L_INIT, "acx111 doesn't support ED!\n"); -+ CLEAR_BIT(adev->set_mask, GETSET_ED_THRESH); -+ } -+ -+ if (adev->set_mask & GETSET_CCA) { -+ /* CCA value */ -+ log(L_INIT, "updating Channel Clear Assessment " -+ "(CCA) value: 0x%02X\n", adev->cca); -+ if (IS_ACX100(adev)) { -+ u8 cca[4 + ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN]; -+ -+ memset(cca, 0, sizeof(cca)); -+ cca[4] = adev->cca; -+ acx_s_configure(adev, &cca, ACX1xx_IE_DOT11_CURRENT_CCA_MODE); -+ } -+ else -+ log(L_INIT, "acx111 doesn't support CCA!\n"); -+ CLEAR_BIT(adev->set_mask, GETSET_CCA); -+ } -+ -+ if (adev->set_mask & GETSET_LED_POWER) { -+ /* Enable Tx */ -+ log(L_INIT, "updating power LED status: %u\n", adev->led_power); -+ -+ acx_lock(adev, flags); -+#if defined (ACX_MEM) -+ acxmem_l_power_led(adev, adev->led_power); -+#else -+ if (IS_PCI(adev)) -+ acxpci_l_power_led(adev, adev->led_power); -+#endif -+ CLEAR_BIT(adev->set_mask, GETSET_LED_POWER); -+ acx_unlock(adev, flags); -+ } -+ -+ if (adev->set_mask & GETSET_POWER_80211) { -+#if POWER_SAVE_80211 -+ acx_s_update_80211_powersave_mode(adev); -+#endif -+ CLEAR_BIT(adev->set_mask, GETSET_POWER_80211); -+ } -+ -+ if (adev->set_mask & GETSET_CHANNEL) { -+ /* channel */ -+ log(L_INIT, "updating channel to: %u\n", adev->channel); -+ CLEAR_BIT(adev->set_mask, GETSET_CHANNEL); -+ } -+ -+ if (adev->set_mask & GETSET_TX) { -+ /* set Tx */ -+ log(L_INIT, "updating: %s Tx\n", -+ adev->tx_disabled ? "disable" : "enable"); -+ if (adev->tx_disabled) -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ else -+ acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_TX, &adev->channel, 1); -+ CLEAR_BIT(adev->set_mask, GETSET_TX); -+ } -+ -+ if (adev->set_mask & GETSET_RX) { -+ /* Enable Rx */ -+ log(L_INIT, "updating: enable Rx on channel: %u\n", -+ adev->channel); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_RX, &adev->channel, 1); -+ CLEAR_BIT(adev->set_mask, GETSET_RX); -+ } -+ -+ if (adev->set_mask & GETSET_RETRY) { -+ u8 short_retry[4 + ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN]; -+ u8 long_retry[4 + ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN]; -+ -+ log(L_INIT, "updating short retry limit: %u, long retry limit: %u\n", -+ adev->short_retry, adev->long_retry); -+ short_retry[0x4] = adev->short_retry; -+ long_retry[0x4] = adev->long_retry; -+ acx_s_configure(adev, &short_retry, ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT); -+ acx_s_configure(adev, &long_retry, ACX1xx_IE_DOT11_LONG_RETRY_LIMIT); -+ CLEAR_BIT(adev->set_mask, GETSET_RETRY); -+ } -+ -+ if (adev->set_mask & SET_MSDU_LIFETIME) { -+ u8 xmt_msdu_lifetime[4 + ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN]; -+ -+ log(L_INIT, "updating tx MSDU lifetime: %u\n", -+ adev->msdu_lifetime); -+ *(u32 *)&xmt_msdu_lifetime[4] = cpu_to_le32((u32)adev->msdu_lifetime); -+ acx_s_configure(adev, &xmt_msdu_lifetime, ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME); -+ CLEAR_BIT(adev->set_mask, SET_MSDU_LIFETIME); -+ } -+ -+ if (adev->set_mask & GETSET_REG_DOMAIN) { -+ log(L_INIT, "updating regulatory domain: 0x%02X\n", -+ adev->reg_dom_id); -+ acx_s_set_sane_reg_domain(adev, 1); -+ CLEAR_BIT(adev->set_mask, GETSET_REG_DOMAIN); -+ } -+ -+ if (adev->set_mask & GETSET_MODE) { -+ adev->ndev->type = (adev->mode == ACX_MODE_MONITOR) ? -+ adev->monitor_type : ARPHRD_ETHER; -+ -+ switch (adev->mode) { -+ case ACX_MODE_3_AP: -+ -+ acx_lock(adev, flags); -+ acx_l_sta_list_init(adev); -+ adev->aid = 0; -+ adev->ap_client = NULL; -+ MAC_COPY(adev->bssid, adev->dev_addr); -+ /* this basically says "we're connected" */ -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ acx_unlock(adev, flags); -+ -+ acx111_s_feature_off(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER); -+ /* start sending beacons */ -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ break; -+ case ACX_MODE_MONITOR: -+ acx111_s_feature_on(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER); -+ /* this stops beacons */ -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ /* this basically says "we're connected" */ -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ SET_BIT(adev->set_mask, SET_RXCONFIG|SET_WEP_OPTIONS); -+ break; -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ acx111_s_feature_off(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER); -+ -+ acx_lock(adev, flags); -+ adev->aid = 0; -+ adev->ap_client = NULL; -+ acx_unlock(adev, flags); -+ -+ /* we want to start looking for peer or AP */ -+ start_scan = 1; -+ break; -+ case ACX_MODE_OFF: -+ /* TODO: disable RX/TX, stop any scanning activity etc: */ -+ /* adev->tx_disabled = 1; */ -+ /* SET_BIT(adev->set_mask, GETSET_RX|GETSET_TX); */ -+ -+ /* This stops beacons (invalid macmode...) */ -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ acx_set_status(adev, ACX_STATUS_0_STOPPED); -+ break; -+ } -+ CLEAR_BIT(adev->set_mask, GETSET_MODE); -+ } -+ -+ if (adev->set_mask & SET_RXCONFIG) { -+ acx_s_initialize_rx_config(adev); -+ CLEAR_BIT(adev->set_mask, SET_RXCONFIG); -+ } -+ -+ if (adev->set_mask & GETSET_RESCAN) { -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ start_scan = 1; -+ break; -+ } -+ CLEAR_BIT(adev->set_mask, GETSET_RESCAN); -+ } -+ -+ if (adev->set_mask & GETSET_WEP) { -+ /* encode */ -+ -+ ie_dot11WEPDefaultKeyID_t dkey; -+#ifdef DEBUG_WEP -+ struct { -+ u16 type; -+ u16 len; -+ u8 val; -+ } ACX_PACKED keyindic; -+#endif -+ log(L_INIT, "updating WEP key settings\n"); -+ -+ acx_s_set_wepkey(adev); -+ -+ dkey.KeyID = adev->wep_current_index; -+ log(L_INIT, "setting WEP key %u as default\n", dkey.KeyID); -+ acx_s_configure(adev, &dkey, ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET); -+#ifdef DEBUG_WEP -+ keyindic.val = 3; -+ acx_s_configure(adev, &keyindic, ACX111_IE_KEY_CHOOSE); -+#endif -+ start_scan = 1; -+ CLEAR_BIT(adev->set_mask, GETSET_WEP); -+ } -+ -+ if (adev->set_mask & SET_WEP_OPTIONS) { -+ acx100_ie_wep_options_t options; -+ if (IS_ACX111(adev)) { -+ log(L_DEBUG, "setting WEP Options for acx111 is not supported\n"); -+ } else { -+ log(L_INIT, "setting WEP Options\n"); -+ acx100_s_init_wep(adev); -+#if 0 -+ /* let's choose maximum setting: 4 default keys, -+ * plus 10 other keys: */ -+ options.NumKeys = cpu_to_le16(DOT11_MAX_DEFAULT_WEP_KEYS + 10); -+ /* don't decrypt default key only, -+ * don't override decryption: */ -+ options.WEPOption = 0; -+ if (adev->mode == ACX_MODE_MONITOR) { -+ /* don't decrypt default key only, -+ * override decryption mechanism: */ -+ options.WEPOption = 2; -+ } -+ -+ acx_s_configure(adev, &options, ACX100_IE_WEP_OPTIONS); -+#endif -+ } -+ CLEAR_BIT(adev->set_mask, SET_WEP_OPTIONS); -+ } -+ -+ /* Rescan was requested */ -+ if (start_scan) { -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ /* We can avoid clearing list if join code -+ ** will be a bit more clever about not picking -+ ** 'bad' AP over and over again */ -+ acx_lock(adev, flags); -+ adev->ap_client = NULL; -+ acx_l_sta_list_init(adev); -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); -+ acx_unlock(adev, flags); -+ -+ acx_s_cmd_start_scan(adev); -+ } -+ } -+ -+ /* debug, rate, and nick don't need any handling */ -+ /* what about sniffing mode?? */ -+ -+ log(L_INIT, "get_mask 0x%08X, set_mask 0x%08X - after update\n", -+ adev->get_mask, adev->set_mask); -+ -+/* end: */ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_e_after_interrupt_task -+*/ -+static int -+acx_s_recalib_radio(acx_device_t *adev) -+{ -+ if (IS_ACX111(adev)) { -+ acx111_cmd_radiocalib_t cal; -+ -+ printk("%s: recalibrating radio\n", adev->ndev->name); -+ /* automatic recalibration, choose all methods: */ -+ cal.methods = cpu_to_le32(0x8000000f); -+ /* automatic recalibration every 60 seconds (value in TUs) -+ * I wonder what the firmware default here is? */ -+ cal.interval = cpu_to_le32(58594); -+ return acx_s_issue_cmd_timeo(adev, ACX111_CMD_RADIOCALIB, -+ &cal, sizeof(cal), CMD_TIMEOUT_MS(100)); -+ } else { -+ /* On ACX100, we need to recalibrate the radio -+ * by issuing a GETSET_TX|GETSET_RX */ -+ if (/* (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0)) && -+ (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0)) && */ -+ (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_TX, &adev->channel, 1)) && -+ (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_RX, &adev->channel, 1)) ) -+ return OK; -+ return NOT_OK; -+ } -+} -+ -+static void -+acx_s_after_interrupt_recalib(acx_device_t *adev) -+{ -+ int res; -+ -+ /* this helps with ACX100 at least; -+ * hopefully ACX111 also does a -+ * recalibration here */ -+ -+ /* clear flag beforehand, since we want to make sure -+ * it's cleared; then only set it again on specific circumstances */ -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ -+ /* better wait a bit between recalibrations to -+ * prevent overheating due to torturing the card -+ * into working too long despite high temperature -+ * (just a safety measure) */ -+ if (adev->recalib_time_last_success -+ && time_before(jiffies, adev->recalib_time_last_success -+ + RECALIB_PAUSE * 60 * HZ)) { -+ if (adev->recalib_msg_ratelimit <= 4) { -+ printk("%s: less than " STRING(RECALIB_PAUSE) -+ " minutes since last radio recalibration, " -+ "not recalibrating (maybe card is too hot?)\n", -+ adev->ndev->name); -+ adev->recalib_msg_ratelimit++; -+ if (adev->recalib_msg_ratelimit == 5) -+ printk("disabling above message until next recalib\n"); -+ } -+ return; -+ } -+ -+ adev->recalib_msg_ratelimit = 0; -+ -+ /* note that commands sometimes fail (card busy), -+ * so only clear flag if we were fully successful */ -+ res = acx_s_recalib_radio(adev); -+ if (res == OK) { -+ printk("%s: successfully recalibrated radio\n", -+ adev->ndev->name); -+ adev->recalib_time_last_success = jiffies; -+ adev->recalib_failure_count = 0; -+ } else { -+ /* failed: resubmit, but only limited -+ * amount of times within some time range -+ * to prevent endless loop */ -+ -+ adev->recalib_time_last_success = 0; /* we failed */ -+ -+ /* if some time passed between last -+ * attempts, then reset failure retry counter -+ * to be able to do next recalib attempt */ -+ if (time_after(jiffies, adev->recalib_time_last_attempt + 5*HZ)) -+ adev->recalib_failure_count = 0; -+ -+ if (adev->recalib_failure_count < 5) { -+ /* increment inside only, for speedup of outside path */ -+ adev->recalib_failure_count++; -+ adev->recalib_time_last_attempt = jiffies; -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ } -+ } -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) -+static void -+acx_e_after_interrupt_task(struct work_struct *work) -+{ -+ acx_device_t *adev = container_of(work, acx_device_t, after_interrupt_task); -+#else -+ static void -+ acx_e_after_interrupt_task(void *data) -+ { -+ struct net_device *ndev = (struct net_device*)data; -+ acx_device_t *adev = ndev2adev(ndev); -+#endif -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ if (!adev->after_interrupt_jobs) -+ goto end; /* no jobs to do */ -+ -+#if TX_CLEANUP_IN_SOFTIRQ -+ /* can happen only on PCI */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_TX_CLEANUP) { -+ acx_lock(adev, flags); -+ acxpci_l_clean_txdesc(adev); -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_TX_CLEANUP); -+ acx_unlock(adev, flags); -+ } -+#endif -+ /* we see lotsa tx errors */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_RADIO_RECALIB) { -+ acx_s_after_interrupt_recalib(adev); -+ } -+ -+ /* a poor interrupt code wanted to do update_card_settings() */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_UPDATE_CARD_CFG) { -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) -+ acx_s_update_card_settings(adev); -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ } -+ -+ /* 1) we detected that no Scan_Complete IRQ came from fw, or -+ ** 2) we found too many STAs */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_STOP_SCAN) { -+ log(L_IRQ, "sending a stop scan cmd...\n"); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_STOP_SCAN, NULL, 0); -+ /* HACK: set the IRQ bit, since we won't get a -+ * scan complete IRQ any more on ACX111 (works on ACX100!), -+ * since _we_, not a fw, have stopped the scan */ -+ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_STOP_SCAN); -+ } -+ -+ /* either fw sent Scan_Complete or we detected that -+ ** no Scan_Complete IRQ came from fw. Finish scanning, -+ ** pick join partner if any */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_COMPLETE_SCAN) { -+ if (adev->status == ACX_STATUS_1_SCANNING) { -+ if (OK != acx_s_complete_scan(adev)) { -+ SET_BIT(adev->after_interrupt_jobs, -+ ACX_AFTER_IRQ_RESTART_SCAN); -+ } -+ } else { -+ /* + scan kills current join status - restore it -+ ** (do we need it for STA?) */ -+ /* + does it happen only with active scans? -+ ** active and passive scans? ALL scans including -+ ** background one? */ -+ /* + was not verified that everything is restored -+ ** (but at least we start to emit beacons again) */ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ log(L_IRQ, "redoing cmd_join_bssid() after scan\n"); -+ acx_s_cmd_join_bssid(adev, adev->bssid); -+ } -+ } -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_COMPLETE_SCAN); -+ } -+ -+ /* STA auth or assoc timed out, start over again */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_RESTART_SCAN) { -+ log(L_IRQ, "sending a start_scan cmd...\n"); -+ acx_s_cmd_start_scan(adev); -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_RESTART_SCAN); -+ } -+ -+ /* whee, we got positive assoc response! 8) */ -+ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_ASSOCIATE) { -+ acx_ie_generic_t pdr; -+ /* tiny race window exists, checking that we still a STA */ -+ switch (adev->mode) { -+ case ACX_MODE_2_STA: -+ pdr.m.aid = cpu_to_le16(adev->aid); -+ acx_s_configure(adev, &pdr, ACX1xx_IE_ASSOC_ID); -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); -+ log(L_ASSOC|L_DEBUG, "ASSOCIATED!\n"); -+ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_ASSOCIATE); -+ } -+ } -+end: -+ acx_sem_unlock(adev); -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_schedule_task -+** -+** Schedule the call of the after_interrupt method after leaving -+** the interrupt context. -+*/ -+void -+acx_schedule_task(acx_device_t *adev, unsigned int set_flag) -+{ -+ SET_BIT(adev->after_interrupt_jobs, set_flag); -+ SCHEDULE_WORK(&adev->after_interrupt_task); -+} -+ -+ -+/*********************************************************************** -+*/ -+void -+acx_init_task_scheduler(acx_device_t *adev) -+{ -+ /* configure task scheduler */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) -+ INIT_WORK(&adev->after_interrupt_task, acx_e_after_interrupt_task); -+#else -+ INIT_WORK(&adev->after_interrupt_task, acx_e_after_interrupt_task, -+ adev->ndev); -+#endif -+} -+ -+ -+/*********************************************************************** -+** acx_s_start -+*/ -+void -+acx_s_start(acx_device_t *adev) -+{ -+ FN_ENTER; -+ -+ /* -+ * Ok, now we do everything that can possibly be done with ioctl -+ * calls to make sure that when it was called before the card -+ * was up we get the changes asked for -+ */ -+ -+ SET_BIT(adev->set_mask, SET_TEMPLATES|SET_STA_LIST|GETSET_WEP -+ |GETSET_TXPOWER|GETSET_ANTENNA|GETSET_ED_THRESH|GETSET_CCA -+ |GETSET_REG_DOMAIN|GETSET_MODE|GETSET_CHANNEL -+ |GETSET_TX|GETSET_RX|GETSET_STATION_ID); -+ -+ log(L_INIT, "updating initial settings on iface activation\n"); -+ acx_s_update_card_settings(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acx_update_capabilities -+*/ -+void -+acx_update_capabilities(acx_device_t *adev) -+{ -+ u16 cap = 0; -+ -+ switch (adev->mode) { -+ case ACX_MODE_3_AP: -+ SET_BIT(cap, WF_MGMT_CAP_ESS); break; -+ case ACX_MODE_0_ADHOC: -+ SET_BIT(cap, WF_MGMT_CAP_IBSS); break; -+ /* other types of stations do not emit beacons */ -+ } -+ -+ if (adev->wep_restricted) { -+ SET_BIT(cap, WF_MGMT_CAP_PRIVACY); -+ } -+ if (adev->cfgopt_dot11ShortPreambleOption) { -+ SET_BIT(cap, WF_MGMT_CAP_SHORT); -+ } -+ if (adev->cfgopt_dot11PBCCOption) { -+ SET_BIT(cap, WF_MGMT_CAP_PBCC); -+ } -+ if (adev->cfgopt_dot11ChannelAgility) { -+ SET_BIT(cap, WF_MGMT_CAP_AGILITY); -+ } -+ log(L_DEBUG, "caps updated from 0x%04X to 0x%04X\n", -+ adev->capabilities, cap); -+ adev->capabilities = cap; -+} -+ -+/*********************************************************************** -+** Common function to parse ALL configoption struct formats -+** (ACX100 and ACX111; FIXME: how to make it work with ACX100 USB!?!?). -+** FIXME: logging should be removed here and added to a /proc file instead -+*/ -+void -+acx_s_parse_configoption(acx_device_t *adev, const acx111_ie_configoption_t *pcfg) -+{ -+ const u8 *pEle; -+ int i; -+ int is_acx111 = IS_ACX111(adev); -+ -+ if (acx_debug & L_DEBUG) { -+ printk("configoption struct content:\n"); -+ acx_dump_bytes(pcfg, sizeof(*pcfg)); -+ } -+ -+ if (( is_acx111 && (adev->eeprom_version == 5)) -+ || (!is_acx111 && (adev->eeprom_version == 4)) -+ || (!is_acx111 && (adev->eeprom_version == 5))) { -+ /* these versions are known to be supported */ -+ } else { -+ printk("unknown chip and EEPROM version combination (%s, v%d), " -+ "don't know how to parse config options yet. " -+ "Please report\n", is_acx111 ? "ACX111" : "ACX100", -+ adev->eeprom_version); -+ return; -+ } -+ -+ /* first custom-parse the first part which has chip-specific layout */ -+ -+ pEle = (const u8 *) pcfg; -+ -+ pEle += 4; /* skip (type,len) header */ -+ -+ memcpy(adev->cfgopt_NVSv, pEle, sizeof(adev->cfgopt_NVSv)); -+ pEle += sizeof(adev->cfgopt_NVSv); -+ -+ if (is_acx111) { -+ adev->cfgopt_NVS_vendor_offs = le16_to_cpu(*(u16 *)pEle); -+ pEle += sizeof(adev->cfgopt_NVS_vendor_offs); -+ -+ adev->cfgopt_probe_delay = 200; /* good default value? */ -+ pEle += 2; /* FIXME: unknown, value 0x0001 */ -+ } else { -+ memcpy(adev->cfgopt_MAC, pEle, sizeof(adev->cfgopt_MAC)); -+ pEle += sizeof(adev->cfgopt_MAC); -+ -+ adev->cfgopt_probe_delay = le16_to_cpu(*(u16 *)pEle); -+ pEle += sizeof(adev->cfgopt_probe_delay); -+ if ((adev->cfgopt_probe_delay < 100) || (adev->cfgopt_probe_delay > 500)) { -+ printk("strange probe_delay value %d, " -+ "tweaking to 200\n", adev->cfgopt_probe_delay); -+ adev->cfgopt_probe_delay = 200; -+ } -+ } -+ -+ adev->cfgopt_eof_memory = le32_to_cpu(*(u32 *)pEle); -+ pEle += sizeof(adev->cfgopt_eof_memory); -+ -+ printk("NVS_vendor_offs:%04X probe_delay:%d eof_memory:%d\n", -+ adev->cfgopt_NVS_vendor_offs, -+ adev->cfgopt_probe_delay, -+ adev->cfgopt_eof_memory); -+ -+ adev->cfgopt_dot11CCAModes = *pEle++; -+ adev->cfgopt_dot11Diversity = *pEle++; -+ adev->cfgopt_dot11ShortPreambleOption = *pEle++; -+ adev->cfgopt_dot11PBCCOption = *pEle++; -+ adev->cfgopt_dot11ChannelAgility = *pEle++; -+ adev->cfgopt_dot11PhyType = *pEle++; -+ adev->cfgopt_dot11TempType = *pEle++; -+ printk("CCAModes:%02X Diversity:%02X ShortPreOpt:%02X " -+ "PBCC:%02X ChanAgil:%02X PHY:%02X Temp:%02X\n", -+ adev->cfgopt_dot11CCAModes, -+ adev->cfgopt_dot11Diversity, -+ adev->cfgopt_dot11ShortPreambleOption, -+ adev->cfgopt_dot11PBCCOption, -+ adev->cfgopt_dot11ChannelAgility, -+ adev->cfgopt_dot11PhyType, -+ adev->cfgopt_dot11TempType); -+ -+ /* then use common parsing for next part which has common layout */ -+ -+ pEle++; /* skip table_count (6) */ -+ -+ if (IS_MEM(adev) && IS_ACX100(adev)) -+ { -+ /* -+ * For iPaq hx4700 Generic Slave F/W 1.10.7.K. I'm not sure if these -+ * 4 extra bytes are before the dot11 things above or after, so I'm just -+ * going to guess after. If someone sees these aren't reasonable numbers, -+ * please fix this. -+ * The area from which the dot11 values above are read contains: -+ * 04 01 01 01 00 05 01 06 00 02 01 02 -+ * the 8 dot11 reads above take care of 8 of them, but which 8... -+ */ -+ pEle += 4; -+ } -+ -+ adev->cfgopt_antennas.type = pEle[0]; -+ adev->cfgopt_antennas.len = pEle[1]; -+ printk("AntennaID:%02X Len:%02X Data:", -+ adev->cfgopt_antennas.type, adev->cfgopt_antennas.len); -+ for (i = 0; i < pEle[1]; i++) { -+ adev->cfgopt_antennas.list[i] = pEle[i+2]; -+ printk("%02X ", pEle[i+2]); -+ } -+ printk("\n"); -+ -+ pEle += pEle[1] + 2; -+ adev->cfgopt_power_levels.type = pEle[0]; -+ adev->cfgopt_power_levels.len = pEle[1]; -+ printk("PowerLevelID:%02X Len:%02X Data:", -+ adev->cfgopt_power_levels.type, adev->cfgopt_power_levels.len); -+ for (i = 0; i < pEle[1]; i++) { -+ adev->cfgopt_power_levels.list[i] = le16_to_cpu(*(u16 *)&pEle[i*2+2]); -+ printk("%04X ", adev->cfgopt_power_levels.list[i]); -+ } -+ printk("\n"); -+ -+ pEle += pEle[1]*2 + 2; -+ adev->cfgopt_data_rates.type = pEle[0]; -+ adev->cfgopt_data_rates.len = pEle[1]; -+ printk("DataRatesID:%02X Len:%02X Data:", -+ adev->cfgopt_data_rates.type, adev->cfgopt_data_rates.len); -+ for (i = 0; i < pEle[1]; i++) { -+ adev->cfgopt_data_rates.list[i] = pEle[i+2]; -+ printk("%02X ", pEle[i+2]); -+ } -+ printk("\n"); -+ -+ pEle += pEle[1] + 2; -+ adev->cfgopt_domains.type = pEle[0]; -+ adev->cfgopt_domains.len = pEle[1]; -+ if (IS_MEM(adev) && IS_ACX100(adev)) -+ { -+ /* -+ * For iPaq hx4700 Generic Slave F/W 1.10.7.K. -+ * There's an extra byte between this structure and the next -+ * that is not accounted for with this structure's length. It's -+ * most likely a bug in the firmware, but we can fix it here -+ * by bumping the length of this field by 1. -+ */ -+ adev->cfgopt_domains.len++; -+ } -+ printk("DomainID:%02X Len:%02X Data:", -+ adev->cfgopt_domains.type, adev->cfgopt_domains.len); -+ for (i = 0; i < adev->cfgopt_domains.len; i++) { -+ adev->cfgopt_domains.list[i] = pEle[i+2]; -+ printk("%02X ", pEle[i+2]); -+ } -+ printk("\n"); -+ -+ pEle += adev->cfgopt_domains.len + 2; -+ -+ adev->cfgopt_product_id.type = pEle[0]; -+ adev->cfgopt_product_id.len = pEle[1]; -+ for (i = 0; i < pEle[1]; i++) { -+ adev->cfgopt_product_id.list[i] = pEle[i+2]; -+ } -+ printk("ProductID:%02X Len:%02X Data:%.*s\n", -+ adev->cfgopt_product_id.type, adev->cfgopt_product_id.len, -+ adev->cfgopt_product_id.len, (char *)adev->cfgopt_product_id.list); -+ -+ pEle += pEle[1] + 2; -+ adev->cfgopt_manufacturer.type = pEle[0]; -+ adev->cfgopt_manufacturer.len = pEle[1]; -+ for (i = 0; i < pEle[1]; i++) { -+ adev->cfgopt_manufacturer.list[i] = pEle[i+2]; -+ } -+ printk("ManufacturerID:%02X Len:%02X Data:%.*s\n", -+ adev->cfgopt_manufacturer.type, adev->cfgopt_manufacturer.len, -+ adev->cfgopt_manufacturer.len, (char *)adev->cfgopt_manufacturer.list); -+/* -+ printk("EEPROM part:\n"); -+ for (i=0; i<58; i++) { -+ printk("%02X =======> 0x%02X\n", -+ i, (u8 *)adev->cfgopt_NVSv[i-2]); -+ } -+*/ -+} -+ -+ -+/*********************************************************************** -+*/ -+static int __init -+acx_e_init_module(void) -+{ -+ int r1,r2,r3,r4; -+ -+ acx_struct_size_check(); -+ -+ printk("acx: this driver is still EXPERIMENTAL\n" -+ "acx: reading README file and/or Craig's HOWTO is " -+ "recommended, visit http://acx100.sf.net in case " -+ "of further questions/discussion\n"); -+ -+#if defined(CONFIG_ACX_PCI) -+ r1 = acxpci_e_init_module(); -+#else -+ r1 = -EINVAL; -+#endif -+#if defined(CONFIG_ACX_MEM) -+ r2 = acxmem_e_init_module(); -+#else -+ r2 = -EINVAL; -+#endif -+#if defined(CONFIG_ACX_USB) -+ r3 = acxusb_e_init_module(); -+#else -+ r3 = -EINVAL; -+#endif -+#if defined(CONFIG_ACX_CS) -+ r4 = acx_cs_init(); -+#else -+ r4 = -EINVAL; -+#endif -+ if (r2 && r1 && r3 && r4) { /* all failed! */ -+ if (r3 || r1) -+ return r3 ? r3 : r1; -+ else -+ return r2; -+ } -+ /* return success if at least one succeeded */ -+ return 0; -+ -+} -+ -+static void __exit -+acx_e_cleanup_module(void) -+{ -+#if defined(CONFIG_ACX_PCI) -+ acxpci_e_cleanup_module(); -+#endif -+#if defined(CONFIG_ACX_MEM) -+ acxmem_e_cleanup_module(); -+#endif -+#if defined(CONFIG_ACX_USB) -+ acxusb_e_cleanup_module(); -+#endif -+#if defined(CONFIG_ACX_CS) -+ acx_cs_cleanup(); -+#endif -+} -+ -+module_init(acx_e_init_module) -+module_exit(acx_e_cleanup_module) -Index: linux-2.6.23/drivers/net/wireless/acx/conv.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/conv.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,504 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx.h" -+ -+ -+/*********************************************************************** -+** proto_is_stt -+** -+** Searches the 802.1h Selective Translation Table for a given -+** protocol. -+** -+** prottype - protocol number (in host order) to search for. -+** -+** Returns: -+** 1 - if the table is empty or a match is found. -+** 0 - if the table is non-empty and a match is not found. -+** -+** Based largely on p80211conv.c of the linux-wlan-ng project -+*/ -+static inline int -+proto_is_stt(unsigned int proto) -+{ -+ /* Always return found for now. This is the behavior used by the */ -+ /* Zoom Win95 driver when 802.1h mode is selected */ -+ /* TODO: If necessary, add an actual search we'll probably -+ need this to match the CMAC's way of doing things. -+ Need to do some testing to confirm. -+ */ -+ -+ if (proto == 0x80f3) /* APPLETALK */ -+ return 1; -+ -+ return 0; -+/* return ((prottype == ETH_P_AARP) || (prottype == ETH_P_IPX)); */ -+} -+ -+/* Helpers */ -+ -+static inline void -+store_llc_snap(struct wlan_llc *llc) -+{ -+ llc->dsap = 0xaa; /* SNAP, see IEEE 802 */ -+ llc->ssap = 0xaa; -+ llc->ctl = 0x03; -+} -+static inline int -+llc_is_snap(const struct wlan_llc *llc) -+{ -+ return (llc->dsap == 0xaa) -+ && (llc->ssap == 0xaa) -+ && (llc->ctl == 0x03); -+} -+static inline void -+store_oui_rfc1042(struct wlan_snap *snap) -+{ -+ snap->oui[0] = 0; -+ snap->oui[1] = 0; -+ snap->oui[2] = 0; -+} -+static inline int -+oui_is_rfc1042(const struct wlan_snap *snap) -+{ -+ return (snap->oui[0] == 0) -+ && (snap->oui[1] == 0) -+ && (snap->oui[2] == 0); -+} -+static inline void -+store_oui_8021h(struct wlan_snap *snap) -+{ -+ snap->oui[0] = 0; -+ snap->oui[1] = 0; -+ snap->oui[2] = 0xf8; -+} -+static inline int -+oui_is_8021h(const struct wlan_snap *snap) -+{ -+ return (snap->oui[0] == 0) -+ && (snap->oui[1] == 0) -+ && (snap->oui[2] == 0xf8); -+} -+ -+ -+/*********************************************************************** -+** acx_ether_to_txbuf -+** -+** Uses the contents of the ether frame to build the elements of -+** the 802.11 frame. -+** -+** We don't actually set up the frame header here. That's the -+** MAC's job. We're only handling conversion of DIXII or 802.3+LLC -+** frames to something that works with 802.11. -+** -+** Based largely on p80211conv.c of the linux-wlan-ng project -+*/ -+int -+acx_ether_to_txbuf(acx_device_t *adev, void *txbuf, const struct sk_buff *skb) -+{ -+ struct wlan_hdr_a3 *w_hdr; -+ struct wlan_ethhdr *e_hdr; -+ struct wlan_llc *e_llc; -+ struct wlan_snap *e_snap; -+ const u8 *a1, *a3; -+ int header_len, payload_len = -1; -+ /* protocol type or data length, depending on whether -+ * DIX or 802.3 ethernet format */ -+ u16 proto; -+ u16 fc; -+ -+ FN_ENTER; -+ -+ if (unlikely(!skb->len)) { -+ log(L_DEBUG, "zero-length skb!\n"); -+ goto end; -+ } -+ -+ w_hdr = (struct wlan_hdr_a3*)txbuf; -+ -+ switch (adev->mode) { -+ case ACX_MODE_MONITOR: -+ /* NB: one day we might want to play with DESC_CTL2_FCS -+ ** Will need to stop doing "- WLAN_FCS_LEN" here then */ -+ if (unlikely(skb->len >= WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_FCS_LEN)) { -+ printk("%s: can't tx oversized frame (%d bytes)\n", -+ adev->ndev->name, skb->len); -+ goto end; -+ } -+ memcpy(w_hdr, skb->data, skb->len); -+ payload_len = skb->len; -+ goto end; -+ } -+ -+ /* step 1: classify ether frame, DIX or 802.3? */ -+ e_hdr = (wlan_ethhdr_t *)skb->data; -+ proto = ntohs(e_hdr->type); -+ if (proto <= 1500) { -+ log(L_DEBUG, "tx: 802.3 len: %d\n", skb->len); -+ /* codes <= 1500 reserved for 802.3 lengths */ -+ /* it's 802.3, pass ether payload unchanged, */ -+ /* trim off ethernet header and copy payload to txdesc */ -+ header_len = WLAN_HDR_A3_LEN; -+ } else { -+ /* it's DIXII, time for some conversion */ -+ /* Create 802.11 packet. Header also contains llc and snap. */ -+ -+ log(L_DEBUG, "tx: DIXII len: %d\n", skb->len); -+ -+ /* size of header is 802.11 header + llc + snap */ -+ header_len = WLAN_HDR_A3_LEN + sizeof(wlan_llc_t) + sizeof(wlan_snap_t); -+ /* llc is located behind the 802.11 header */ -+ e_llc = (wlan_llc_t*)(w_hdr + 1); -+ /* snap is located behind the llc */ -+ e_snap = (wlan_snap_t*)(e_llc + 1); -+ -+ /* setup the LLC header */ -+ store_llc_snap(e_llc); -+ -+ /* setup the SNAP header */ -+ e_snap->type = htons(proto); -+ if (proto_is_stt(proto)) { -+ store_oui_8021h(e_snap); -+ } else { -+ store_oui_rfc1042(e_snap); -+ } -+ } -+ /* trim off ethernet header and copy payload to txbuf */ -+ payload_len = skb->len - sizeof(wlan_ethhdr_t); -+ /* TODO: can we just let acx DMA payload from skb instead? */ -+ memcpy((u8*)txbuf + header_len, skb->data + sizeof(wlan_ethhdr_t), payload_len); -+ payload_len += header_len; -+ -+ /* Set up the 802.11 header */ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi); -+ a1 = e_hdr->daddr; -+ a3 = adev->bssid; -+ break; -+ case ACX_MODE_2_STA: -+ fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi | WF_FC_TODSi); -+ a1 = adev->bssid; -+ a3 = e_hdr->daddr; -+ break; -+ case ACX_MODE_3_AP: -+ fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi | WF_FC_FROMDSi); -+ a1 = e_hdr->daddr; -+ a3 = e_hdr->saddr; -+ break; -+ default: -+ printk("%s: error - converting eth to wlan in unknown mode\n", -+ adev->ndev->name); -+ payload_len = -1; -+ goto end; -+ } -+ if (adev->wep_enabled) -+ SET_BIT(fc, WF_FC_ISWEPi); -+ -+ w_hdr->fc = fc; -+ w_hdr->dur = 0; -+ MAC_COPY(w_hdr->a1, a1); -+ MAC_COPY(w_hdr->a2, adev->dev_addr); -+ MAC_COPY(w_hdr->a3, a3); -+ w_hdr->seq = 0; -+ -+#ifdef DEBUG_CONVERT -+ if (acx_debug & L_DATA) { -+ printk("original eth frame [%d]: ", skb->len); -+ acx_dump_bytes(skb->data, skb->len); -+ printk("802.11 frame [%d]: ", payload_len); -+ acx_dump_bytes(w_hdr, payload_len); -+ } -+#endif -+ -+end: -+ FN_EXIT1(payload_len); -+ return payload_len; -+} -+ -+ -+/*********************************************************************** -+** acx_rxbuf_to_ether -+** -+** Uses the contents of a received 802.11 frame to build an ether -+** frame. -+** -+** This function extracts the src and dest address from the 802.11 -+** frame to use in the construction of the eth frame. -+** -+** Based largely on p80211conv.c of the linux-wlan-ng project -+*/ -+struct sk_buff* -+acx_rxbuf_to_ether(acx_device_t *adev, rxbuffer_t *rxbuf) -+{ -+ struct wlan_hdr *w_hdr; -+ struct wlan_ethhdr *e_hdr; -+ struct wlan_llc *e_llc; -+ struct wlan_snap *e_snap; -+ struct sk_buff *skb; -+ const u8 *daddr; -+ const u8 *saddr; -+ const u8 *e_payload; -+ int buflen, payload_length; -+ unsigned int payload_offset, mtu; -+ u16 fc; -+ -+ FN_ENTER; -+ -+ /* This looks complex because it must handle possible -+ ** phy header in rxbuff */ -+ w_hdr = acx_get_wlan_hdr(adev, rxbuf); -+ payload_offset = WLAN_HDR_A3_LEN; /* it is relative to w_hdr */ -+ payload_length = RXBUF_BYTES_USED(rxbuf) /* entire rxbuff... */ -+ - ((u8*)w_hdr - (u8*)rxbuf) /* minus space before 802.11 frame */ -+ - WLAN_HDR_A3_LEN; /* minus 802.11 header */ -+ -+ /* setup some vars for convenience */ -+ fc = w_hdr->fc; -+ switch (WF_FC_FROMTODSi & fc) { -+ case 0: -+ daddr = w_hdr->a1; -+ saddr = w_hdr->a2; -+ break; -+ case WF_FC_FROMDSi: -+ daddr = w_hdr->a1; -+ saddr = w_hdr->a3; -+ break; -+ case WF_FC_TODSi: -+ daddr = w_hdr->a3; -+ saddr = w_hdr->a2; -+ break; -+ default: /* WF_FC_FROMTODSi */ -+ payload_offset += (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN); -+ payload_length -= (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN); -+ daddr = w_hdr->a3; -+ saddr = w_hdr->a4; -+ } -+ -+ if ((WF_FC_ISWEPi & fc) && IS_ACX100(adev)) { -+ /* chop off the IV+ICV WEP header and footer */ -+ log(L_DATA|L_DEBUG, "rx: WEP packet, " -+ "chopping off IV and ICV\n"); -+ payload_offset += WLAN_WEP_IV_LEN; -+ payload_length -= WLAN_WEP_IV_LEN + WLAN_WEP_ICV_LEN; -+ } -+ -+ if (unlikely(payload_length < 0)) { -+ printk("%s: rx frame too short, ignored\n", adev->ndev->name); -+ goto ret_null; -+ } -+ -+ e_hdr = (wlan_ethhdr_t*) ((u8*) w_hdr + payload_offset); -+ e_llc = (wlan_llc_t*) e_hdr; -+ e_snap = (wlan_snap_t*) (e_llc + 1); -+ mtu = adev->ndev->mtu; -+ e_payload = (u8*) (e_snap + 1); -+ -+ log(L_DATA, "rx: payload_offset %d, payload_length %d\n", -+ payload_offset, payload_length); -+ log(L_XFER|L_DATA, -+ "rx: frame info: llc=%02X%02X%02X " -+ "snap.oui=%02X%02X%02X snap.type=%04X\n", -+ e_llc->dsap, e_llc->ssap, e_llc->ctl, -+ e_snap->oui[0], e_snap->oui[1], e_snap->oui[2], -+ ntohs(e_snap->type)); -+ -+ /* Test for the various encodings */ -+ if ((payload_length >= sizeof(wlan_ethhdr_t)) -+ && ((e_llc->dsap != 0xaa) || (e_llc->ssap != 0xaa)) -+ && ( (mac_is_equal(daddr, e_hdr->daddr)) -+ || (mac_is_equal(saddr, e_hdr->saddr)) -+ ) -+ ) { -+ /* 802.3 Encapsulated: */ -+ /* wlan frame body contains complete eth frame (header+body) */ -+ log(L_DEBUG|L_DATA, "rx: 802.3 ENCAP len=%d\n", payload_length); -+ -+ if (unlikely(payload_length > (mtu + ETH_HLEN))) { -+ printk("%s: rx: ENCAP frame too large (%d > %d)\n", -+ adev->ndev->name, -+ payload_length, mtu + ETH_HLEN); -+ goto ret_null; -+ } -+ -+ /* allocate space and setup host buffer */ -+ buflen = payload_length; -+ /* Attempt to align IP header (14 bytes eth header + 2 = 16) */ -+ skb = dev_alloc_skb(buflen + 2); -+ if (unlikely(!skb)) -+ goto no_skb; -+ skb_reserve(skb, 2); -+ skb_put(skb, buflen); /* make room */ -+ -+ /* now copy the data from the 80211 frame */ -+ memcpy(skb->data, e_hdr, payload_length); -+ -+ } else if ( (payload_length >= sizeof(wlan_llc_t)+sizeof(wlan_snap_t)) -+ && llc_is_snap(e_llc) ) { -+ /* wlan frame body contains: AA AA 03 ... (it's a SNAP) */ -+ -+ if ( !oui_is_rfc1042(e_snap) -+ || (proto_is_stt(ieee2host16(e_snap->type)) /* && (ethconv == WLAN_ETHCONV_8021h) */)) { -+ log(L_DEBUG|L_DATA, "rx: SNAP+RFC1042 len=%d\n", payload_length); -+ /* wlan frame body contains: AA AA 03 !(00 00 00) ... -or- */ -+ /* wlan frame body contains: AA AA 03 00 00 00 0x80f3 ... */ -+ /* build eth hdr, type = len, copy AA AA 03... as eth body */ -+ /* it's a SNAP + RFC1042 frame && protocol is in STT */ -+ -+ if (unlikely(payload_length > mtu)) { -+ printk("%s: rx: SNAP frame too large (%d > %d)\n", -+ adev->ndev->name, -+ payload_length, mtu); -+ goto ret_null; -+ } -+ -+ /* allocate space and setup host buffer */ -+ buflen = payload_length + ETH_HLEN; -+ skb = dev_alloc_skb(buflen + 2); -+ if (unlikely(!skb)) -+ goto no_skb; -+ skb_reserve(skb, 2); -+ skb_put(skb, buflen); /* make room */ -+ -+ /* create 802.3 header */ -+ e_hdr = (wlan_ethhdr_t*) skb->data; -+ MAC_COPY(e_hdr->daddr, daddr); -+ MAC_COPY(e_hdr->saddr, saddr); -+ e_hdr->type = htons(payload_length); -+ -+ /* Now copy the data from the 80211 frame. -+ Make room in front for the eth header, and keep the -+ llc and snap from the 802.11 payload */ -+ memcpy(skb->data + ETH_HLEN, -+ e_llc, payload_length); -+ -+ } else { -+ /* wlan frame body contains: AA AA 03 00 00 00 [type] [tail] */ -+ /* build eth hdr, type=[type], copy [tail] as eth body */ -+ log(L_DEBUG|L_DATA, "rx: 802.1h/RFC1042 len=%d\n", -+ payload_length); -+ /* it's an 802.1h frame (an RFC1042 && protocol is not in STT) */ -+ /* build a DIXII + RFC894 */ -+ -+ payload_length -= sizeof(wlan_llc_t) + sizeof(wlan_snap_t); -+ if (unlikely(payload_length > mtu)) { -+ printk("%s: rx: DIXII frame too large (%d > %d)\n", -+ adev->ndev->name, -+ payload_length, mtu); -+ goto ret_null; -+ } -+ -+ /* allocate space and setup host buffer */ -+ buflen = payload_length + ETH_HLEN; -+ skb = dev_alloc_skb(buflen + 2); -+ if (unlikely(!skb)) -+ goto no_skb; -+ skb_reserve(skb, 2); -+ skb_put(skb, buflen); /* make room */ -+ -+ /* create 802.3 header */ -+ e_hdr = (wlan_ethhdr_t *) skb->data; -+ MAC_COPY(e_hdr->daddr, daddr); -+ MAC_COPY(e_hdr->saddr, saddr); -+ e_hdr->type = e_snap->type; -+ -+ /* Now copy the data from the 80211 frame. -+ Make room in front for the eth header, and cut off the -+ llc and snap from the 802.11 payload */ -+ memcpy(skb->data + ETH_HLEN, -+ e_payload, payload_length); -+ } -+ -+ } else { -+ log(L_DEBUG|L_DATA, "rx: NON-ENCAP len=%d\n", payload_length); -+ /* build eth hdr, type=len, copy wlan body as eth body */ -+ /* any NON-ENCAP */ -+ /* it's a generic 80211+LLC or IPX 'Raw 802.3' */ -+ /* build an 802.3 frame */ -+ -+ if (unlikely(payload_length > mtu)) { -+ printk("%s: rx: OTHER frame too large (%d > %d)\n", -+ adev->ndev->name, payload_length, mtu); -+ goto ret_null; -+ } -+ -+ /* allocate space and setup host buffer */ -+ buflen = payload_length + ETH_HLEN; -+ skb = dev_alloc_skb(buflen + 2); -+ if (unlikely(!skb)) -+ goto no_skb; -+ skb_reserve(skb, 2); -+ skb_put(skb, buflen); /* make room */ -+ -+ /* set up the 802.3 header */ -+ e_hdr = (wlan_ethhdr_t *) skb->data; -+ MAC_COPY(e_hdr->daddr, daddr); -+ MAC_COPY(e_hdr->saddr, saddr); -+ e_hdr->type = htons(payload_length); -+ -+ /* now copy the data from the 80211 frame */ -+ memcpy(skb->data + ETH_HLEN, e_llc, payload_length); -+ } -+ -+ skb->dev = adev->ndev; -+ skb->protocol = eth_type_trans(skb, adev->ndev); -+ -+#ifdef DEBUG_CONVERT -+ if (acx_debug & L_DATA) { -+ int len = RXBUF_BYTES_RCVD(adev, rxbuf); -+ printk("p802.11 frame [%d]: ", len); -+ acx_dump_bytes(w_hdr, len); -+ printk("eth frame [%d]: ", skb->len); -+ acx_dump_bytes(skb->data, skb->len); -+ } -+#endif -+ -+ FN_EXIT0; -+ return skb; -+ -+no_skb: -+ printk("%s: rx: no memory for skb (%d bytes)\n", -+ adev->ndev->name, buflen + 2); -+ret_null: -+ FN_EXIT1((int)NULL); -+ return NULL; -+} -Index: linux-2.6.23/drivers/net/wireless/acx/cs.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/cs.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,5703 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+** -+** Slave memory interface support: -+** -+** Todd Blumer - SDG Systems -+** Bill Reese - HP -+** Eric McCorkle - Shadowsun -+** -+** CF support, (c) Fabrice Crohas, Paul Sokolovsky -+*/ -+#define ACX_MEM 1 -+ -+/* -+ * non-zero makes it dump the ACX memory to the console then -+ * panic when you cat /proc/driver/acx_wlan0_diag -+ */ -+#define DUMP_MEM_DEFINED 1 -+ -+#define DUMP_MEM_DURING_DIAG 0 -+#define DUMP_IF_SLOW 0 -+ -+#define PATCH_AROUND_BAD_SPOTS 1 -+#define HX4700_FIRMWARE_CHECKSUM 0x0036862e -+#define HX4700_ALTERNATE_FIRMWARE_CHECKSUM 0x00368a75 -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+ -+/* Linux 2.6.18+ uses */ -+#ifndef UTS_RELEASE -+#include -+#endif -+ -+#include /* required for Lx 2.6.8 ?? */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define PCMCIA_DEBUG 1 -+ -+/* -+ All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If -+ you do not define PCMCIA_DEBUG at all, all the debug code will be -+ left out. If you compile with PCMCIA_DEBUG=0, the debug code will -+ be present but disabled -- but it can then be enabled for specific -+ modules at load time with a 'pc_debug=#' option to insmod. -+ -+*/ -+#include -+#include -+#include -+#include -+#include -+#include "acx.h" -+#include "acx_hw.h" -+ -+#ifdef PCMCIA_DEBUG -+static int pc_debug = PCMCIA_DEBUG; -+module_param(pc_debug, int, 0); -+static char *version = "$Revision: 1.10 $"; -+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); -+#else -+#define DEBUG(n, args...) -+#endif -+ -+ -+static win_req_t memwin; -+ -+typedef struct local_info_t { -+ dev_node_t node; -+ struct net_device *ndev; -+} local_info_t; -+ -+static struct net_device *resume_ndev; -+ -+ -+/*********************************************************************** -+*/ -+ -+#define CARD_EEPROM_ID_SIZE 6 -+ -+#include -+ -+#define REG_ACX_VENDOR_ID 0x900 -+/* -+ * This is the vendor id on the HX4700, anyway -+ */ -+#define ACX_VENDOR_ID 0x8400104c -+ -+typedef enum { -+ ACX_SOFT_RESET = 0, -+ -+ ACX_SLV_REG_ADDR, -+ ACX_SLV_REG_DATA, -+ ACX_SLV_REG_ADATA, -+ -+ ACX_SLV_MEM_CP, -+ ACX_SLV_MEM_ADDR, -+ ACX_SLV_MEM_DATA, -+ ACX_SLV_MEM_CTL, -+} acxreg_t; -+ -+/*********************************************************************** -+*/ -+static void acxmem_i_tx_timeout(struct net_device *ndev); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id); -+#else -+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id, struct pt_regs *regs); -+#endif -+static void acxmem_i_set_multicast_list(struct net_device *ndev); -+ -+static int acxmem_e_open(struct net_device *ndev); -+static int acxmem_e_close(struct net_device *ndev); -+static void acxmem_s_up(struct net_device *ndev); -+static void acxmem_s_down(struct net_device *ndev); -+ -+static void dump_acxmem (acx_device_t *adev, u32 start, int length); -+static int acxmem_complete_hw_reset (acx_device_t *adev); -+static void acxmem_s_delete_dma_regions(acx_device_t *adev); -+ -+static int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+acxmem_e_suspend( struct net_device *ndev, pm_message_t state); -+#else -+acxmem_e_suspend( struct net_device *ndev, u32 state); -+#endif -+static void -+fw_resumer(struct work_struct *notused); -+//fw_resumer( void *data ); -+ -+static int acx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) -+{ -+ struct net_device *ndev = ptr; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ /* -+ * Upper level ioctl() handlers send a NETDEV_CHANGEADDR if the MAC address changes. -+ */ -+ -+ if (NETDEV_CHANGEADDR == event) { -+ /* -+ * the upper layers put the new MAC address in ndev->dev_addr; we just copy -+ * it over and update the ACX with it. -+ */ -+ MAC_COPY(adev->dev_addr, adev->ndev->dev_addr); -+ adev->set_mask |= GETSET_STATION_ID; -+ acx_s_update_card_settings (adev); -+ } -+ -+ return 0; -+} -+ -+static struct notifier_block acx_netdev_notifier = { -+ .notifier_call = acx_netdev_event, -+}; -+ -+/*********************************************************************** -+** Register access -+*/ -+ -+/* Pick one */ -+/* #define INLINE_IO static */ -+#define INLINE_IO static inline -+ -+INLINE_IO u32 -+read_id_register (acx_device_t *adev) -+{ -+ writel (0x24, &adev->iobase[ACX_SLV_REG_ADDR]); -+ return readl (&adev->iobase[ACX_SLV_REG_DATA]); -+} -+ -+INLINE_IO u32 -+read_reg32(acx_device_t *adev, unsigned int offset) -+{ -+ u32 val; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ return readl(((u8*)adev->iobase) + addr); -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ val = readl( &adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return val; -+} -+ -+INLINE_IO u16 -+read_reg16(acx_device_t *adev, unsigned int offset) -+{ -+ u16 lo; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ return readw(((u8 *) adev->iobase) + addr); -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ lo = readw( (u16 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return lo; -+} -+ -+INLINE_IO u8 -+read_reg8(acx_device_t *adev, unsigned int offset) -+{ -+ u8 lo; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) -+ return readb(((u8 *)adev->iobase) + addr); -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ lo = readw( (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return (u8)lo; -+} -+ -+INLINE_IO void -+write_reg32(acx_device_t *adev, unsigned int offset, u32 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writel(val, ((u8*)adev->iobase) + addr); -+ return; -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writel( val, &adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+INLINE_IO void -+write_reg16(acx_device_t *adev, unsigned int offset, u16 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writew(val, ((u8 *)adev->iobase) + addr); -+ return; -+ } -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writew( val, (u16 *) &adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+INLINE_IO void -+write_reg8(acx_device_t *adev, unsigned int offset, u8 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writeb(val, ((u8 *) adev->iobase) + addr); -+ return; -+ } -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writeb( val, (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+/* Handle PCI posting properly: -+ * Make sure that writes reach the adapter in case they require to be executed -+ * *before* the next write, by reading a random (and safely accessible) register. -+ * This call has to be made if there is no read following (which would flush the data -+ * to the adapter), yet the written data has to reach the adapter immediately. */ -+INLINE_IO void -+write_flush(acx_device_t *adev) -+{ -+ /* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */ -+ /* faster version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should also be safe): */ -+ (void) readl(adev->iobase); -+} -+ -+INLINE_IO void -+set_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { -+ u32 tmp; -+ -+ tmp = read_reg32 (adev, offset); -+ tmp = tmp | bits; -+ write_reg32 (adev, offset, tmp); -+ write_flush (adev); -+} -+ -+INLINE_IO void -+clear_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { -+ u32 tmp; -+ -+ tmp = read_reg32 (adev, offset); -+ tmp = tmp & ~bits; -+ write_reg32 (adev, offset, tmp); -+ write_flush (adev); -+} -+ -+/* -+ * Copy from PXA memory to the ACX memory. This assumes both the PXA and ACX -+ * addresses are 32 bit aligned. Count is in bytes. -+ */ -+INLINE_IO void -+write_slavemem32 (acx_device_t *adev, u32 slave_address, u32 val) -+{ -+ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, val); -+} -+ -+INLINE_IO u32 -+read_slavemem32 (acx_device_t *adev, u32 slave_address) -+{ -+ u32 val; -+ -+ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); -+ udelay (10); -+ val = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ -+ return val; -+} -+ -+INLINE_IO void -+write_slavemem8 (acx_device_t *adev, u32 slave_address, u8 val) -+{ -+ u32 data; -+ u32 base; -+ int offset; -+ -+ /* -+ * Get the word containing the target address and the byte offset in that word. -+ */ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ data &= ~(0xff << offset); -+ data |= val << offset; -+ write_slavemem32 (adev, base, data); -+} -+ -+INLINE_IO u8 -+read_slavemem8 (acx_device_t *adev, u32 slave_address) -+{ -+ u8 val; -+ u32 base; -+ u32 data; -+ int offset; -+ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ -+ val = (data >> offset) & 0xff; -+ -+ return val; -+} -+ -+/* -+ * doesn't split across word boundaries -+ */ -+INLINE_IO void -+write_slavemem16 (acx_device_t *adev, u32 slave_address, u16 val) -+{ -+ u32 data; -+ u32 base; -+ int offset; -+ -+ /* -+ * Get the word containing the target address and the byte offset in that word. -+ */ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ data &= ~(0xffff << offset); -+ data |= val << offset; -+ write_slavemem32 (adev, base, data); -+} -+ -+/* -+ * doesn't split across word boundaries -+ */ -+INLINE_IO u16 -+read_slavemem16 (acx_device_t *adev, u32 slave_address) -+{ -+ u16 val; -+ u32 base; -+ u32 data; -+ int offset; -+ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ -+ val = (data >> offset) & 0xffff; -+ -+ return val; -+} -+ -+/* -+ * Copy from slave memory -+ * -+ * TODO - rewrite using address autoincrement, handle partial words -+ */ -+void -+copy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) { -+ u32 tmp = 0; -+ u8 *ptmp = (u8 *) &tmp; -+ -+ /* -+ * Right now I'm making the assumption that the destination is aligned, but -+ * I'd better check. -+ */ -+ if ((u32) destination & 3) { -+ printk ("acx copy_from_slavemem: warning! destination not word-aligned!\n"); -+ } -+ -+ while (count >= 4) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); -+ udelay (10); -+ *((u32 *) destination) = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ count -= 4; -+ source += 4; -+ destination += 4; -+ } -+ -+ /* -+ * If the word reads above didn't satisfy the count, read one more word -+ * and transfer a byte at a time until the request is satisfied. -+ */ -+ if (count) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); -+ udelay (10); -+ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ while (count--) { -+ *destination++ = *ptmp++; -+ } -+ } -+} -+ -+/* -+ * Copy to slave memory -+ * -+ * TODO - rewrite using autoincrement, handle partial words -+ */ -+void -+copy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) -+{ -+ u32 tmp = 0; -+ u8* ptmp = (u8 *) &tmp; -+ static u8 src[512]; /* make static to avoid huge stack objects */ -+ -+ /* -+ * For now, make sure the source is word-aligned by copying it to a word-aligned -+ * buffer. Someday rewrite to avoid the extra copy. -+ */ -+ if (count > sizeof (src)) { -+ printk ("acx copy_to_slavemem: Warning! buffer overflow!\n"); -+ count = sizeof (src); -+ } -+ memcpy (src, source, count); -+ source = src; -+ -+ while (count >= 4) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, *((u32 *) source)); -+ count -= 4; -+ source += 4; -+ destination += 4; -+ } -+ -+ /* -+ * If there are leftovers read the next word from the acx and merge in -+ * what they want to write. -+ */ -+ if (count) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ while (count--) { -+ *ptmp++ = *source++; -+ } -+ /* -+ * reset address in case we're currently in auto-increment mode -+ */ -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, tmp); -+ udelay (10); -+ } -+ -+} -+ -+/* -+ * Block copy to slave buffers using memory block chain mode. Copies to the ACX -+ * transmit buffer structure with minimal intervention on our part. -+ * Interrupts should be disabled when calling this. -+ */ -+void -+chaincopy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) -+{ -+ u32 val; -+ u32 *data = (u32 *) source; -+ static u8 aligned_source[WLAN_A4FR_MAXLEN_WEP_FCS]; -+ -+ /* -+ * Warn if the pointers don't look right. Destination must fit in [23:5] with -+ * zero elsewhere and source should be 32 bit aligned. -+ * This should never happen since we're in control of both, but I want to know about -+ * it if it does. -+ */ -+ if ((destination & 0x00ffffe0) != destination) { -+ printk ("acx chaincopy: destination block 0x%04x not aligned!\n", destination); -+ } -+ if (count > sizeof aligned_source) { -+ printk( KERN_ERR "chaincopy_to_slavemem overflow!\n" ); -+ count = sizeof aligned_source; -+ } -+ if ((u32) source & 3) { -+ memcpy (aligned_source, source, count); -+ data = (u32 *) aligned_source; -+ } -+ -+ /* -+ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment -+ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word -+ */ -+ val = 2 << 16 | 1 << 2; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); -+ -+ /* -+ * SLV_MEM_CP[23:5] = start of 1st block -+ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 -+ */ -+ val = destination & 0x00ffffe0; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); -+ -+ /* -+ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] -+ */ -+ val = (destination & 0x00ffffe0) + (1<<2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); -+ -+ /* -+ * Write the data to the slave data register, rounding up to the end -+ * of the word containing the last byte (hence the > 0) -+ */ -+ while (count > 0) { -+ writel (*data++, &adev->iobase[ACX_SLV_MEM_DATA]); -+ count -= 4; -+ } -+} -+ -+ -+/* -+ * Block copy from slave buffers using memory block chain mode. Copies from the ACX -+ * receive buffer structures with minimal intervention on our part. -+ * Interrupts should be disabled when calling this. -+ */ -+void -+chaincopy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) -+{ -+ u32 val; -+ u32 *data = (u32 *) destination; -+ static u8 aligned_destination[WLAN_A4FR_MAXLEN_WEP_FCS]; -+ int saved_count = count; -+ -+ /* -+ * Warn if the pointers don't look right. Destination must fit in [23:5] with -+ * zero elsewhere and source should be 32 bit aligned. -+ * Turns out the network stack sends unaligned things, so fix them before -+ * copying to the ACX. -+ */ -+ if ((source & 0x00ffffe0) != source) { -+ printk ("acx chaincopy: source block 0x%04x not aligned!\n", source); -+ dump_acxmem (adev, 0, 0x10000); -+ } -+ if ((u32) destination & 3) { -+ //printk ("acx chaincopy: data destination not word aligned!\n"); -+ data = (u32 *) aligned_destination; -+ if (count > sizeof aligned_destination) { -+ printk( KERN_ERR "chaincopy_from_slavemem overflow!\n" ); -+ count = sizeof aligned_destination; -+ } -+ } -+ -+ /* -+ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment -+ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word -+ */ -+ val = (2 << 16) | (1 << 2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); -+ -+ /* -+ * SLV_MEM_CP[23:5] = start of 1st block -+ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 -+ */ -+ val = source & 0x00ffffe0; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); -+ -+ /* -+ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] -+ */ -+ val = (source & 0x00ffffe0) + (1<<2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); -+ -+ /* -+ * Read the data from the slave data register, rounding up to the end -+ * of the word containing the last byte (hence the > 0) -+ */ -+ while (count > 0) { -+ *data++ = readl (&adev->iobase[ACX_SLV_MEM_DATA]); -+ count -= 4; -+ } -+ -+ /* -+ * If the destination wasn't aligned, we would have saved it in -+ * the aligned buffer, so copy it where it should go. -+ */ -+ if ((u32) destination & 3) { -+ memcpy (destination, aligned_destination, saved_count); -+ } -+} -+ -+char -+printable (char c) -+{ -+ return ((c >= 20) && (c < 127)) ? c : '.'; -+} -+ -+#if DUMP_MEM_DEFINED > 0 -+static void -+dump_acxmem (acx_device_t *adev, u32 start, int length) -+{ -+ int i; -+ u8 buf[16]; -+ -+ while (length > 0) { -+ printk ("%04x ", start); -+ copy_from_slavemem (adev, buf, start, 16); -+ for (i = 0; (i < 16) && (i < length); i++) { -+ printk ("%02x ", buf[i]); -+ } -+ for (i = 0; (i < 16) && (i < length); i++) { -+ printk ("%c", printable (buf[i])); -+ } -+ printk ("\n"); -+ start += 16; -+ length -= 16; -+ } -+} -+#endif -+ -+static void -+enable_acx_irq(acx_device_t *adev); -+static void -+disable_acx_irq(acx_device_t *adev); -+ -+/* -+ * Return an acx pointer to the next transmit data block. -+ */ -+u32 -+allocate_acx_txbuf_space (acx_device_t *adev, int count) { -+ u32 block, next, last_block; -+ int blocks_needed; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&adev->txbuf_lock, flags); -+ /* -+ * Take 4 off the memory block size to account for the reserved word at the start of -+ * the block. -+ */ -+ blocks_needed = count / (adev->memblocksize - 4); -+ if (count % (adev->memblocksize - 4)) -+ blocks_needed++; -+ -+ if (blocks_needed <= adev->acx_txbuf_blocks_free) { -+ /* -+ * Take blocks at the head of the free list. -+ */ -+ last_block = block = adev->acx_txbuf_free; -+ -+ /* -+ * Follow block pointers through the requested number of blocks both to -+ * find the new head of the free list and to set the flags for the blocks -+ * appropriately. -+ */ -+ while (blocks_needed--) { -+ /* -+ * Keep track of the last block of the allocation -+ */ -+ last_block = adev->acx_txbuf_free; -+ -+ /* -+ * Make sure the end control flag is not set. -+ */ -+ next = read_slavemem32 (adev, adev->acx_txbuf_free) & 0x7ffff; -+ write_slavemem32 (adev, adev->acx_txbuf_free, next); -+ -+ /* -+ * Update the new head of the free list -+ */ -+ adev->acx_txbuf_free = next << 5; -+ adev->acx_txbuf_blocks_free--; -+ -+ } -+ -+ /* -+ * Flag the last block both by clearing out the next pointer -+ * and marking the control field. -+ */ -+ write_slavemem32 (adev, last_block, 0x02000000); -+ -+ /* -+ * If we're out of buffers make sure the free list pointer is NULL -+ */ -+ if (!adev->acx_txbuf_blocks_free) { -+ adev->acx_txbuf_free = 0; -+ } -+ } -+ else { -+ block = 0; -+ } -+ spin_unlock_irqrestore (&adev->txbuf_lock, flags); -+ return block; -+} -+ -+/* -+ * Return buffer space back to the pool by following the next pointers until we find -+ * the block marked as the end. Point the last block to the head of the free list, -+ * then update the head of the free list to point to the newly freed memory. -+ * This routine gets called in interrupt context, so it shouldn't block to protect -+ * the integrity of the linked list. The ISR already holds the lock. -+ */ -+void -+reclaim_acx_txbuf_space (acx_device_t *adev, u32 blockptr) { -+ u32 cur, last, next; -+ unsigned long flags; -+ -+ spin_lock_irqsave (&adev->txbuf_lock, flags); -+ if ((blockptr >= adev->acx_txbuf_start) && -+ (blockptr <= adev->acx_txbuf_start + -+ (adev->acx_txbuf_numblocks - 1) * adev->memblocksize)) { -+ cur = blockptr; -+ do { -+ last = cur; -+ next = read_slavemem32 (adev, cur); -+ -+ /* -+ * Advance to the next block in this allocation -+ */ -+ cur = (next & 0x7ffff) << 5; -+ -+ /* -+ * This block now counts as free. -+ */ -+ adev->acx_txbuf_blocks_free++; -+ } while (!(next & 0x02000000)); -+ -+ /* -+ * last now points to the last block of that allocation. Update the pointer -+ * in that block to point to the free list and reset the free list to the -+ * first block of the free call. If there were no free blocks, make sure -+ * the new end of the list marks itself as truly the end. -+ */ -+ if (adev->acx_txbuf_free) { -+ write_slavemem32 (adev, last, adev->acx_txbuf_free >> 5); -+ } -+ else { -+ write_slavemem32 (adev, last, 0x02000000); -+ } -+ adev->acx_txbuf_free = blockptr; -+ } -+ spin_unlock_irqrestore(&adev->txbuf_lock, flags); -+} -+ -+/* -+ * Initialize the pieces managing the transmit buffer pool on the ACX. The transmit -+ * buffer is a circular queue with one 32 bit word reserved at the beginning of each -+ * block. The upper 13 bits are a control field, of which only 0x02000000 has any -+ * meaning. The lower 19 bits are the address of the next block divided by 32. -+ */ -+void -+init_acx_txbuf (acx_device_t *adev) { -+ -+ /* -+ * acx100_s_init_memory_pools set up txbuf_start and txbuf_numblocks for us. -+ * All we need to do is reset the rest of the bookeeping. -+ */ -+ -+ adev->acx_txbuf_free = adev->acx_txbuf_start; -+ adev->acx_txbuf_blocks_free = adev->acx_txbuf_numblocks; -+ -+ /* -+ * Initialization leaves the last transmit pool block without a pointer back to -+ * the head of the list, but marked as the end of the list. That's how we want -+ * to see it, too, so leave it alone. This is only ever called after a firmware -+ * reset, so the ACX memory is in the state we want. -+ */ -+ -+} -+ -+INLINE_IO int -+adev_present(acx_device_t *adev) -+{ -+ /* fast version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should be safe): */ -+ return readl(adev->iobase) != 0xffffffff; -+} -+ -+/*********************************************************************** -+*/ -+static inline txdesc_t* -+get_txdesc(acx_device_t *adev, int index) -+{ -+ return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size); -+} -+ -+static inline txdesc_t* -+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc) -+{ -+ return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size); -+} -+ -+static txhostdesc_t* -+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return &adev->txhostdesc_start[index*2]; -+} -+ -+static inline client_t* -+get_txc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return adev->txc[index]; -+} -+ -+static inline u16 -+get_txr(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ index /= adev->txdesc_size; -+ return adev->txr[index]; -+} -+ -+static inline void -+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ adev->txc[index] = c; -+ adev->txr[index] = r111; -+} -+ -+ -+/*********************************************************************** -+** EEPROM and PHY read/write helpers -+*/ -+/*********************************************************************** -+** acxmem_read_eeprom_byte -+** -+** Function called to read an octet in the EEPROM. -+** -+** This function is used by acxmem_e_probe to check if the -+** connected card is a legal one or not. -+** -+** Arguments: -+** adev ptr to acx_device structure -+** addr address to read in the EEPROM -+** charbuf ptr to a char. This is where the read octet -+** will be stored -+*/ -+int -+acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf) -+{ -+ int result; -+ int count; -+ -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for EEPROM read\n", -+ adev->ndev->name); -+ result = NOT_OK; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ *charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA); -+ log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf); -+ result = OK; -+ -+fail: -+ return result; -+} -+ -+ -+/*********************************************************************** -+** We don't lock hw accesses here since we never r/w eeprom in IRQ -+** Note: this function sleeps only because of GFP_KERNEL alloc -+*/ -+#ifdef UNUSED -+int -+acxmem_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf) -+{ -+ u8 *data_verify = NULL; -+ unsigned long flags; -+ int count, i; -+ int result = NOT_OK; -+ u16 gpio_orig; -+ -+ printk("acx: WARNING! I would write to EEPROM now. " -+ "Since I really DON'T want to unless you know " -+ "what you're doing (THIS CODE WILL PROBABLY " -+ "NOT WORK YET!), I will abort that now. And " -+ "definitely make sure to make a " -+ "/proc/driver/acx_wlan0_eeprom backup copy first!!! " -+ "(the EEPROM content includes the PCI config header!! " -+ "If you kill important stuff, then you WILL " -+ "get in trouble and people DID get in trouble already)\n"); -+ return OK; -+ -+ FN_ENTER; -+ -+ data_verify = kmalloc(len, GFP_KERNEL); -+ if (!data_verify) { -+ goto end; -+ } -+ -+ /* first we need to enable the OE (EEPROM Output Enable) GPIO line -+ * to be able to write to the EEPROM. -+ * NOTE: an EEPROM writing success has been reported, -+ * but you probably have to modify GPIO_OUT, too, -+ * and you probably need to activate a different GPIO -+ * line instead! */ -+ gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE); -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1); -+ write_flush(adev); -+ -+ /* ok, now start writing the data out */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i)); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 1); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("WARNING, DANGER!!! " -+ "Timeout waiting for EEPROM write\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ } -+ -+ /* disable EEPROM writing */ -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig); -+ write_flush(adev); -+ -+ /* now start a verification run */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("timeout waiting for EEPROM read\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ -+ data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA); -+ } -+ -+ if (0 == memcmp(charbuf, data_verify, len)) -+ result = OK; /* read data matches, success */ -+ -+end: -+ kfree(data_verify); -+ FN_EXIT1(result); -+ return result; -+} -+#endif /* UNUSED */ -+ -+ -+/*********************************************************************** -+** acxmem_s_read_phy_reg -+** -+** Messing with rx/tx disabling and enabling here -+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic -+*/ -+int -+acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) -+{ -+ int result = NOT_OK; -+ int count; -+ -+ FN_ENTER; -+ -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg32(adev, IO_ACX_PHY_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for phy read\n", -+ adev->ndev->name); -+ *charbuf = 0; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ log(L_DEBUG, "count was %u\n", count); -+ *charbuf = read_reg8(adev, IO_ACX_PHY_DATA); -+ -+ log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg); -+ result = OK; -+ goto fail; /* silence compiler warning */ -+fail: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) -+{ -+ int count; -+ FN_ENTER; -+ -+ /* mprusko said that 32bit accesses result in distorted sensitivity -+ * on his card. Unconfirmed, looks like it's not true (most likely since we -+ * now properly flush writes). */ -+ write_reg32(adev, IO_ACX_PHY_DATA, value); -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 1); -+ write_flush(adev); -+ -+ count = 0xffff; -+ while (read_reg32(adev, IO_ACX_PHY_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for phy read\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg); -+ fail: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+#define NO_AUTO_INCREMENT 1 -+ -+/*********************************************************************** -+** acxmem_s_write_fw -+** -+** Write the firmware image into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** 1 firmware image corrupted -+** 0 success -+*/ -+static int -+acxmem_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset) -+{ -+ int len, size, checkMismatch = -1; -+ u32 sum, v32, tmp, id; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+ write_flush(adev); -+#endif -+#endif -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ sum += p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ len += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+ write_flush(adev); -+#endif -+ write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32); -+ write_flush(adev); -+#endif -+ write_slavemem32 (adev, offset + len - 4, v32); -+ -+ id = read_id_register (adev); -+ -+ /* -+ * check the data written -+ */ -+ tmp = read_slavemem32 (adev, offset + len - 4); -+ if (checkMismatch && (tmp != v32)) { -+ printk ("first data mismatch at 0x%08x good 0x%08x bad 0x%08x id 0x%08x\n", -+ offset + len - 4, v32, tmp, id); -+ checkMismatch = 0; -+ } -+ } -+ log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n", -+ size, sum, le32_to_cpu(fw_image->chksum)); -+ -+ /* compare our checksum with the stored image checksum */ -+ return (sum != le32_to_cpu(fw_image->chksum)); -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_validate_fw -+** -+** Compare the firmware image given with -+** the firmware image written into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** NOT_OK firmware image corrupted or not correctly written -+** OK success -+*/ -+static int -+acxmem_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image, -+ u32 offset) -+{ -+ u32 sum, v32, w32; -+ int len, size; -+ int result = OK; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+#endif -+ -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ p += 4; -+ len += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+#endif -+ udelay(10); -+ w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA); -+#endif -+ w32 = read_slavemem32 (adev, offset + len - 4); -+ -+ if (unlikely(w32 != v32)) { -+ printk("acx: FATAL: firmware upload: " -+ "data parts at offset %d don't match\n(0x%08X vs. 0x%08X)!\n" -+ "I/O timing issues or defective memory, with DWL-xx0+? " -+ "ACX_IO_WIDTH=16 may help. Please report\n", -+ len, v32, w32); -+ result = NOT_OK; -+ break; -+ } -+ -+ sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24); -+ } -+ -+ /* sum control verification */ -+ if (result != NOT_OK) { -+ if (sum != le32_to_cpu(fw_image->chksum)) { -+ printk("acx: FATAL: firmware upload: " -+ "checksums don't match!\n"); -+ result = NOT_OK; -+ } -+ } -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_upload_fw -+** -+** Called from acx_reset_dev -+*/ -+static int -+acxmem_s_upload_fw(acx_device_t *adev) -+{ -+ firmware_image_t *fw_image = NULL; -+ int res = NOT_OK; -+ int try; -+ u32 file_size; -+ char *filename = "WLANGEN.BIN"; -+#ifdef PATCH_AROUND_BAD_SPOTS -+ u32 offset; -+ int i; -+ /* -+ * arm-linux-objdump -d patch.bin, or -+ * od -Ax -t x4 patch.bin after finding the bounds -+ * of the .text section with arm-linux-objdump -s patch.bin -+ */ -+ u32 patch[] = { -+ 0xe584c030, 0xe59fc008, -+ 0xe92d1000, 0xe59fc004, 0xe8bd8000, 0x0000080c, -+ 0x0000aa68, 0x605a2200, 0x2c0a689c, 0x2414d80a, -+ 0x2f00689f, 0x1c27d007, 0x06241e7c, 0x2f000e24, -+ 0xe000d1f6, 0x602e6018, 0x23036468, 0x480203db, -+ 0x60ca6003, 0xbdf0750a, 0xffff0808 -+ }; -+#endif -+ -+ FN_ENTER; -+ /* No combined image; tell common we need the radio firmware, too */ -+ adev->need_radio_fw = 1; -+ -+ fw_image = acx_s_read_fw(adev->dev, filename, &file_size); -+ if (!fw_image) { -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+ } -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxmem_s_write_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_write_fw (main): %d\n", res); -+ if (OK == res) { -+ res = acxmem_s_validate_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_validate_fw " -+ "(main): %d\n", res); -+ } -+ -+ if (OK == res) { -+ SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED); -+ break; -+ } -+ printk("acx: firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+#ifdef PATCH_AROUND_BAD_SPOTS -+ /* -+ * Only want to do this if the firmware is exactly what we expect for an -+ * iPaq 4700; otherwise, bad things would ensue. -+ */ -+ if ((HX4700_FIRMWARE_CHECKSUM == fw_image->chksum) || -+ (HX4700_ALTERNATE_FIRMWARE_CHECKSUM == fw_image->chksum)) { -+ /* -+ * Put the patch after the main firmware image. 0x950c contains -+ * the ACX's idea of the end of the firmware. Use that location to -+ * load ours (which depends on that location being 0xab58) then -+ * update that location to point to after ours. -+ */ -+ -+ offset = read_slavemem32 (adev, 0x950c); -+ -+ log (L_DEBUG, "acx: patching in at 0x%04x\n", offset); -+ -+ for (i = 0; i < sizeof(patch) / sizeof(patch[0]); i++) { -+ write_slavemem32 (adev, offset, patch[i]); -+ offset += sizeof(u32); -+ } -+ -+ /* -+ * Patch the instruction at 0x0804 to branch to our ARM patch at 0xab58 -+ */ -+ write_slavemem32 (adev, 0x0804, 0xea000000 + (0xab58-0x0804-8)/4); -+ -+ /* -+ * Patch the instructions at 0x1f40 to branch to our Thumb patch at 0xab74 -+ * -+ * 4a00 ldr r2, [pc, #0] -+ * 4710 bx r2 -+ * .data 0xab74+1 -+ */ -+ write_slavemem32 (adev, 0x1f40, 0x47104a00); -+ write_slavemem32 (adev, 0x1f44, 0x0000ab74+1); -+ -+ /* -+ * Bump the end of the firmware up to beyond our patch. -+ */ -+ write_slavemem32 (adev, 0x950c, offset); -+ -+ } -+#endif -+ -+ vfree(fw_image); -+ -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_upload_radio -+** -+** Uploads the appropriate radio module firmware into the card. -+*/ -+int -+acxmem_s_upload_radio(acx_device_t *adev) -+{ -+ acx_ie_memmap_t mm; -+ firmware_image_t *radio_image; -+ acx_cmd_radioinit_t radioinit; -+ int res = NOT_OK; -+ int try; -+ u32 offset; -+ u32 size; -+ char filename[sizeof("RADIONN.BIN")]; -+ -+ if (!adev->need_radio_fw) return OK; -+ -+ FN_ENTER; -+ -+ acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+ offset = le32_to_cpu(mm.CodeEnd); -+ -+ snprintf(filename, sizeof(filename), "RADIO%02x.BIN", -+ adev->radio_type); -+ radio_image = acx_s_read_fw(adev->dev, filename, &size); -+ if (!radio_image) { -+ printk("acx: can't load radio module '%s'\n", filename); -+ goto fail; -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxmem_s_write_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res); -+ if (OK == res) { -+ res = acxmem_s_validate_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res); -+ } -+ -+ if (OK == res) -+ break; -+ printk("acx: radio firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); -+ radioinit.offset = cpu_to_le32(offset); -+ -+ /* no endian conversion needed, remains in card CPU area: */ -+ radioinit.len = radio_image->size; -+ -+ vfree(radio_image); -+ -+ if (OK != res) -+ goto fail; -+ -+ /* will take a moment so let's have a big timeout */ -+ acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT, -+ &radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000)); -+ -+ res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+ -+fail: -+ FN_EXIT1(res); -+ return res; -+} -+ -+/*********************************************************************** -+** acxmem_l_reset_mac -+** -+** MAC will be reset -+** Call context: reset_dev -+*/ -+static void -+acxmem_l_reset_mac(acx_device_t *adev) -+{ -+ int count; -+ FN_ENTER; -+ -+ /* halt eCPU */ -+ set_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); -+ -+ /* now do soft reset of eCPU, set bit */ -+ set_regbits (adev, IO_ACX_SOFT_RESET, 0x1); -+ log(L_DEBUG, "%s: enable soft reset...\n", __func__); -+ -+ /* Windows driver sleeps here for a while with this sequence */ -+ for (count = 0; count < 200; count++) { -+ udelay (50); -+ } -+ -+ /* now clear bit again: deassert eCPU reset */ -+ log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__); -+ clear_regbits (adev, IO_ACX_SOFT_RESET, 0x1); -+ -+ /* now start a burst read from initial EEPROM */ -+ set_regbits (adev, IO_ACX_EE_START, 0x1); -+ -+ /* -+ * Windows driver sleeps here for a while with this sequence -+ */ -+ for (count = 0; count < 200; count++) { -+ udelay (50); -+ } -+ -+ /* Windows driver writes 0x10000 to register 0x808 here */ -+ -+ write_reg32 (adev, 0x808, 0x10000); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_verify_init -+*/ -+static int -+acxmem_s_verify_init(acx_device_t *adev) -+{ -+ int result = NOT_OK; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ timeout = jiffies + 2*HZ; -+ for (;;) { -+ u32 irqstat = read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if ((irqstat != 0xFFFFFFFF) && (irqstat & HOST_INT_FCS_THRESHOLD)) { -+ result = OK; -+ write_reg32(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD); -+ break; -+ } -+ if (time_after(jiffies, timeout)) -+ break; -+ /* Init may take up to ~0.5 sec total */ -+ acx_s_msleep(50); -+ } -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** A few low-level helpers -+** -+** Note: these functions are not protected by lock -+** and thus are never allowed to be called from IRQ. -+** Also they must not race with fw upload which uses same hw regs -+*/ -+ -+/*********************************************************************** -+** acxmem_write_cmd_type_status -+*/ -+ -+static inline void -+acxmem_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status) -+{ -+ write_slavemem32 (adev, (u32) adev->cmd_area, type | (status << 16)); -+ write_flush(adev); -+} -+ -+ -+/*********************************************************************** -+** acxmem_read_cmd_type_status -+*/ -+static u32 -+acxmem_read_cmd_type_status(acx_device_t *adev) -+{ -+ u32 cmd_type, cmd_status; -+ -+ cmd_type = read_slavemem32 (adev, (u32) adev->cmd_area); -+ -+ cmd_status = (cmd_type >> 16); -+ cmd_type = (u16)cmd_type; -+ -+ log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n", -+ cmd_type, cmd_status, -+ acx_cmd_status_str(cmd_status)); -+ -+ return cmd_status; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_reset_dev -+** -+** Arguments: -+** netdevice that contains the adev variable -+** Returns: -+** NOT_OK on fail -+** OK on success -+** Side effects: -+** device is hard reset -+** Call context: -+** acxmem_e_probe -+** Comment: -+** This resets the device using low level hardware calls -+** as well as uploads and verifies the firmware to the card -+*/ -+ -+static inline void -+init_mboxes(acx_device_t *adev) -+{ -+ u32 cmd_offs, info_offs; -+ -+ cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS); -+ info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS); -+ adev->cmd_area = (u8*) cmd_offs; -+ adev->info_area = (u8*) info_offs; -+ /* -+ log(L_DEBUG, "iobase2=%p\n" -+ */ -+ log( L_DEBUG, "cmd_mbox_offset=%X cmd_area=%p\n" -+ "info_mbox_offset=%X info_area=%p\n", -+ cmd_offs, adev->cmd_area, -+ info_offs, adev->info_area); -+} -+ -+ -+static inline void -+read_eeprom_area(acx_device_t *adev) -+{ -+#if ACX_DEBUG > 1 -+ int offs; -+ u8 tmp; -+ -+ for (offs = 0x8c; offs < 0xb9; offs++) -+ acxmem_read_eeprom_byte(adev, offs, &tmp); -+#endif -+} -+ -+static int -+acxmem_s_reset_dev(acx_device_t *adev) -+{ -+ const char* msg = ""; -+ unsigned long flags; -+ int result = NOT_OK; -+ u16 hardware_info; -+ u16 ecpu_ctrl; -+ int count; -+ u32 tmp; -+ -+ FN_ENTER; -+ /* -+ write_reg32 (adev, IO_ACX_SLV_MEM_CP, 0); -+ */ -+ /* reset the device to make sure the eCPU is stopped -+ * to upload the firmware correctly */ -+ -+ acx_lock(adev, flags); -+ -+ /* Windows driver does some funny things here */ -+ /* -+ * clear bit 0x200 in register 0x2A0 -+ */ -+ clear_regbits (adev, 0x2A0, 0x200); -+ -+ /* -+ * Set bit 0x200 in ACX_GPIO_OUT -+ */ -+ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); -+ -+ /* -+ * read register 0x900 until its value is 0x8400104C, sleeping -+ * in between reads if it's not immediate -+ */ -+ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); -+ count = 500; -+ while (count-- && (tmp != ACX_VENDOR_ID)) { -+ mdelay (10); -+ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); -+ } -+ -+ /* end what Windows driver does */ -+ -+ acxmem_l_reset_mac(adev); -+ -+ ecpu_ctrl = read_reg32(adev, IO_ACX_ECPU_CTRL) & 1; -+ if (!ecpu_ctrl) { -+ msg = "eCPU is already running. "; -+ goto end_unlock; -+ } -+ -+#ifdef WE_DONT_NEED_THAT_DO_WE -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) { -+ /* eCPU most likely means "embedded CPU" */ -+ msg = "eCPU did not start after boot from flash. "; -+ goto end_unlock; -+ } -+ -+ /* check sense on reset flags */ -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) { -+ printk("%s: eCPU did not start after boot (SOR), " -+ "is this fatal?\n", adev->ndev->name); -+ } -+#endif -+ /* scan, if any, is stopped now, setting corresponding IRQ bit */ -+ adev->irq_status |= HOST_INT_SCAN_COMPLETE; -+ -+ acx_unlock(adev, flags); -+ -+ /* need to know radio type before fw load */ -+ /* Need to wait for arrival of this information in a loop, -+ * most probably since eCPU runs some init code from EEPROM -+ * (started burst read in reset_mac()) which also -+ * sets the radio type ID */ -+ -+ count = 0xffff; -+ do { -+ hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION); -+ if (!--count) { -+ msg = "eCPU didn't indicate radio type"; -+ goto end_fail; -+ } -+ cpu_relax(); -+ } while (!(hardware_info & 0xff00)); /* radio type still zero? */ -+ printk("ACX radio type 0x%02x\n", (hardware_info >> 8) & 0xff); -+ /* printk("DEBUG: count %d\n", count); */ -+ adev->form_factor = hardware_info & 0xff; -+ adev->radio_type = hardware_info >> 8; -+ -+ /* load the firmware */ -+ if (OK != acxmem_s_upload_fw(adev)) -+ goto end_fail; -+ -+ /* acx_s_msleep(10); this one really shouldn't be required */ -+ -+ /* now start eCPU by clearing bit */ -+ clear_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); -+ log(L_DEBUG, "booted eCPU up and waiting for completion...\n"); -+ -+ /* Windows driver clears bit 0x200 in register 0x2A0 here */ -+ clear_regbits (adev, 0x2A0, 0x200); -+ -+ /* Windows driver sets bit 0x200 in ACX_GPIO_OUT here */ -+ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); -+ /* wait for eCPU bootup */ -+ if (OK != acxmem_s_verify_init(adev)) { -+ msg = "timeout waiting for eCPU. "; -+ goto end_fail; -+ } -+ log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n"); -+ init_mboxes(adev); -+ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); -+ -+ /* test that EEPROM is readable */ -+ read_eeprom_area(adev); -+ -+ result = OK; -+ goto end; -+ -+/* Finish error message. Indicate which function failed */ -+end_unlock: -+ acx_unlock(adev, flags); -+end_fail: -+ printk("acx: %sreset_dev() FAILED\n", msg); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_issue_cmd_timeo -+** -+** Sends command to fw, extract result -+** -+** NB: we do _not_ take lock inside, so be sure to not touch anything -+** which may interfere with IRQ handler operation -+** -+** TODO: busy wait is a bit silly, so: -+** 1) stop doing many iters - go to sleep after first -+** 2) go to waitqueue based approach: wait, not poll! -+*/ -+#undef FUNC -+#define FUNC "issue_cmd" -+ -+#if !ACX_DEBUG -+int -+acxmem_s_issue_cmd_timeo( -+ acx_device_t *adev, -+ unsigned int cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout) -+{ -+#else -+int -+acxmem_s_issue_cmd_timeo_debug( -+ acx_device_t *adev, -+ unsigned cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout, -+ const char* cmdstr) -+{ -+ unsigned long start = jiffies; -+#endif -+ const char *devname; -+ unsigned counter; -+ u16 irqtype; -+ int i, j; -+ u8 *p; -+ u16 cmd_status; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ devname = adev->ndev->name; -+ if (!devname || !devname[0] || devname[4]=='%') -+ devname = "acx"; -+ -+ log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n", -+ cmdstr, buflen, cmd_timeout, -+ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); -+ -+ if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) { -+ printk("%s: "FUNC"(): firmware is not loaded yet, " -+ "cannot execute commands!\n", devname); -+ goto bad; -+ } -+ -+ if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) { -+ printk("input buffer (len=%u):\n", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ -+ /* wait for firmware to become idle for our command submission */ -+ timeout = HZ/5; -+ counter = (timeout * 1000 / HZ) - 1; /* in ms */ -+ timeout += jiffies; -+ do { -+ cmd_status = acxmem_read_cmd_type_status(adev); -+ /* Test for IDLE state */ -+ if (!cmd_status) -+ break; -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ if (!counter) { -+ /* the card doesn't get idle, we're in trouble */ -+ printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n", -+ devname, cmd_status); -+#if DUMP_IF_SLOW > 0 -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("not idle"); -+#endif -+ goto bad; -+ } else if (counter < 190) { /* if waited >10ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. " -+ "Please report\n", 199 - counter); -+ } -+ -+ /* now write the parameters of the command if needed */ -+ if (buffer && buflen) { -+ /* if it's an INTERROGATE command, just pass the length -+ * of parameters to read, as data */ -+#if CMD_DISCOVERY -+ if (cmd == ACX1xx_CMD_INTERROGATE) -+ memset_io(adev->cmd_area + 4, 0xAA, buflen); -+#endif -+ /* -+ * slave memory version -+ */ -+ copy_to_slavemem (adev, (u32) (adev->cmd_area + 4), buffer, -+ (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen); -+ } -+ /* now write the actual command type */ -+ acxmem_write_cmd_type_status(adev, cmd, 0); -+ -+ /* clear CMD_COMPLETE bit. can be set only by IRQ handler: */ -+ adev->irq_status &= ~HOST_INT_CMD_COMPLETE; -+ -+ /* execute command */ -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD); -+ write_flush(adev); -+ -+ /* wait for firmware to process command */ -+ -+ /* Ensure nonzero and not too large timeout. -+ ** Also converts e.g. 100->99, 200->199 -+ ** which is nice but not essential */ -+ cmd_timeout = (cmd_timeout-1) | 1; -+ if (unlikely(cmd_timeout > 1199)) -+ cmd_timeout = 1199; -+ -+ /* we schedule away sometimes (timeout can be large) */ -+ counter = cmd_timeout; -+ timeout = jiffies + cmd_timeout * HZ / 1000; -+ do { -+ if (!adev->irqs_active) { /* IRQ disabled: poll */ -+ irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ write_reg16(adev, IO_ACX_IRQ_ACK, -+ HOST_INT_CMD_COMPLETE); -+ break; -+ } -+ } else { /* Wait when IRQ will set the bit */ -+ irqtype = adev->irq_status; -+ if (irqtype & HOST_INT_CMD_COMPLETE) -+ break; -+ } -+ -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ /* save state for debugging */ -+ cmd_status = acxmem_read_cmd_type_status(adev); -+ -+ /* put the card in IDLE state */ -+ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); -+ -+ if (!counter) { /* timed out! */ -+ printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. " -+ "irq bits:0x%04X irq_status:0x%04X timeout:%dms " -+ "cmd_status:%d (%s)\n", -+ devname, (adev->irqs_active) ? "waiting" : "polling", -+ irqtype, adev->irq_status, cmd_timeout, -+ cmd_status, acx_cmd_status_str(cmd_status)); -+ printk("%s: "FUNC"(): device irq status 0x%04x\n", -+ devname, read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES)); -+ printk("%s: "FUNC"(): IO_ACX_IRQ_MASK 0x%04x IO_ACX_FEMR 0x%04x\n", -+ devname, -+ read_reg16 (adev, IO_ACX_IRQ_MASK), -+ read_reg16 (adev, IO_ACX_FEMR)); -+ if (read_reg16 (adev, IO_ACX_IRQ_MASK) == 0xffff) { -+ printk ("acxmem: firmware probably hosed - reloading\n"); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+ { -+ pm_message_t state; -+ /* acxmem_e_suspend (resume_pdev, state); */ -+ acxmem_e_suspend (adev->ndev , state); -+ } -+#else -+ acxmem_e_suspend (adev, 0); -+#endif -+ { -+ resume_ndev = adev->ndev; -+ fw_resumer (NULL); -+ } -+ } -+ -+ goto bad; -+ } else if (cmd_timeout - counter > 30) { /* if waited >30ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. " -+ "count:%d. Please report\n", -+ (adev->irqs_active) ? "waited" : "polled", -+ cmd_timeout - counter, counter); -+ } -+ -+ if (1 != cmd_status) { /* it is not a 'Success' */ -+ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). " -+ "Took %dms of %d\n", -+ devname, cmd_status, acx_cmd_status_str(cmd_status), -+ cmd_timeout - counter, cmd_timeout); -+ /* zero out result buffer -+ * WARNING: this will trash stack in case of illegally large input -+ * length! */ -+ if (buflen > 388) { -+ /* -+ * 388 is maximum command length -+ */ -+ printk ("invalid length 0x%08x\n", buflen); -+ buflen = 388; -+ } -+ p = (u8 *) buffer; -+ for (i = 0; i < buflen; i+= 16) { -+ printk ("%04x:", i); -+ for (j = 0; (j < 16) && (i+j < buflen); j++) { -+ printk (" %02x", *p++); -+ } -+ printk ("\n"); -+ } -+ if (buffer && buflen) -+ memset(buffer, 0, buflen); -+ goto bad; -+ } -+ -+ /* read in result parameters if needed */ -+ if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) { -+ copy_from_slavemem (adev, buffer, (u32) (adev->cmd_area + 4), buflen); -+ if (acx_debug & L_DEBUG) { -+ printk("output buffer (len=%u): ", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ } -+ -+/* ok: */ -+ log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n", -+ cmdstr, jiffies - start); -+ FN_EXIT1(OK); -+ return OK; -+ -+bad: -+ /* Give enough info so that callers can avoid -+ ** printing their own diagnostic messages */ -+#if ACX_DEBUG -+ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); -+#else -+ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); -+#endif -+ dump_stack(); -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+#if defined(NONESSENTIAL_FEATURES) -+typedef struct device_id { -+ unsigned char id[6]; -+ char *descr; -+ char *type; -+} device_id_t; -+ -+static const device_id_t -+device_ids[] = -+{ -+ { -+ {'G', 'l', 'o', 'b', 'a', 'l'}, -+ NULL, -+ NULL, -+ }, -+ { -+ {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, -+ "uninitialized", -+ "SpeedStream SS1021 or Gigafast WF721-AEX" -+ }, -+ { -+ {0x80, 0x81, 0x82, 0x83, 0x84, 0x85}, -+ "non-standard", -+ "DrayTek Vigor 520" -+ }, -+ { -+ {'?', '?', '?', '?', '?', '?'}, -+ "non-standard", -+ "Level One WPC-0200" -+ }, -+ { -+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, -+ "empty", -+ "DWL-650+ variant" -+ } -+}; -+ -+static void -+acx_show_card_eeprom_id(acx_device_t *adev) -+{ -+ unsigned char buffer[CARD_EEPROM_ID_SIZE]; -+ int i; -+ -+ memset(&buffer, 0, CARD_EEPROM_ID_SIZE); -+ /* use direct EEPROM access */ -+ for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) { -+ if (OK != acxmem_read_eeprom_byte(adev, -+ ACX100_EEPROM_ID_OFFSET + i, -+ &buffer[i])) { -+ printk("acx: reading EEPROM FAILED\n"); -+ break; -+ } -+ } -+ -+ for (i = 0; i < VEC_SIZE(device_ids); i++) { -+ if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) { -+ if (device_ids[i].descr) { -+ printk("acx: EEPROM card ID string check " -+ "found %s card ID: is this %s?\n", -+ device_ids[i].descr, device_ids[i].type); -+ } -+ break; -+ } -+ } -+ if (i == VEC_SIZE(device_ids)) { -+ printk("acx: EEPROM card ID string check found " -+ "unknown card: expected 'Global', got '%.*s\'. " -+ "Please report\n", CARD_EEPROM_ID_SIZE, buffer); -+ } -+} -+#endif /* NONESSENTIAL_FEATURES */ -+ -+/*********************************************************************** -+** acxmem_free_desc_queues -+** -+** Releases the queues that have been allocated, the -+** others have been initialised to NULL so this -+** function can be used if only part of the queues were allocated. -+*/ -+ -+void -+acxmem_free_desc_queues(acx_device_t *adev) -+{ -+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \ -+ if (ptr) { \ -+ kfree(ptr); \ -+ ptr = NULL; \ -+ size = 0; \ -+ } -+ -+ FN_ENTER; -+ -+ ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy); -+ -+ adev->txdesc_start = NULL; -+ -+ ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy); -+ -+ adev->rxdesc_start = NULL; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_delete_dma_regions -+*/ -+static void -+acxmem_s_delete_dma_regions(acx_device_t *adev) -+{ -+ unsigned long flags; -+ -+ FN_ENTER; -+ /* disable radio Tx/Rx. Shouldn't we use the firmware commands -+ * here instead? Or are we that much down the road that it's no -+ * longer possible here? */ -+ /* -+ * slave memory interface really doesn't like this. -+ */ -+ /* -+ write_reg16(adev, IO_ACX_ENABLE, 0); -+ */ -+ -+ acx_s_msleep(100); -+ -+ acx_lock(adev, flags); -+ acxmem_free_desc_queues(adev); -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_probe -+** -+** Probe routine called when a PCI device w/ matching ID is found. -+** Here's the sequence: -+** - Allocate the PCI resources. -+** - Read the PCMCIA attribute memory to make sure we have a WLAN card -+** - Reset the MAC -+** - Initialize the dev and wlan data -+** - Initialize the MAC -+** -+** pdev - ptr to pci device structure containing info about pci configuration -+** id - ptr to the device id entry that matched this device -+*/ -+static const u16 -+IO_ACX100[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_END_CTL */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x007c, /* IO_ACX_INT_TRIG */ -+ 0x0098, /* IO_ACX_IRQ_MASK */ -+ 0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00ac, /* IO_ACX_IRQ_ACK */ -+ 0x00b0, /* IO_ACX_HINT_TRIG */ -+ -+ 0x0104, /* IO_ACX_ENABLE */ -+ -+ 0x0250, /* IO_ACX_EEPROM_CTL */ -+ 0x0254, /* IO_ACX_EEPROM_ADDR */ -+ 0x0258, /* IO_ACX_EEPROM_DATA */ -+ 0x025c, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0268, /* IO_ACX_PHY_ADDR */ -+ 0x026c, /* IO_ACX_PHY_DATA */ -+ 0x0270, /* IO_ACX_PHY_CTL */ -+ -+ 0x0290, /* IO_ACX_GPIO_OE */ -+ -+ 0x0298, /* IO_ACX_GPIO_OUT */ -+ -+ 0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x02ac, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x02d0, /* IO_ACX_EE_START */ -+ 0x02d4, /* IO_ACX_SOR_CFG */ -+ 0x02d8 /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static const u16 -+IO_ACX111[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_MEM_CP */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x00b4, /* IO_ACX_INT_TRIG */ -+ 0x00d4, /* IO_ACX_IRQ_MASK */ -+ /* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */ -+ 0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00e8, /* IO_ACX_IRQ_ACK */ -+ 0x00ec, /* IO_ACX_HINT_TRIG */ -+ -+ 0x01d0, /* IO_ACX_ENABLE */ -+ -+ 0x0338, /* IO_ACX_EEPROM_CTL */ -+ 0x033c, /* IO_ACX_EEPROM_ADDR */ -+ 0x0340, /* IO_ACX_EEPROM_DATA */ -+ 0x0344, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0350, /* IO_ACX_PHY_ADDR */ -+ 0x0354, /* IO_ACX_PHY_DATA */ -+ 0x0358, /* IO_ACX_PHY_CTL */ -+ -+ 0x0374, /* IO_ACX_GPIO_OE */ -+ -+ 0x037c, /* IO_ACX_GPIO_OUT */ -+ -+ 0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x0390, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x0100, /* IO_ACX_EE_START */ -+ 0x0104, /* IO_ACX_SOR_CFG */ -+ 0x0108, /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static void -+dummy_netdev_init(struct net_device *ndev) {} -+ -+/* -+ * Most of the acx specific pieces of hardware reset. -+ */ -+static int -+acxmem_complete_hw_reset (acx_device_t *adev) -+{ -+ acx111_ie_configoption_t co; -+ -+ /* NB: read_reg() reads may return bogus data before reset_dev(), -+ * since the firmware which directly controls large parts of the I/O -+ * registers isn't initialized yet. -+ * acx100 seems to be more affected than acx111 */ -+ if (OK != acxmem_s_reset_dev (adev)) -+ return -1; -+ -+ if (IS_ACX100(adev)) { -+ /* ACX100: configopt struct in cmd mailbox - directly after reset */ -+ copy_from_slavemem (adev, (u8*) &co, (u32) adev->cmd_area, sizeof (co)); -+ } -+ -+ if (OK != acx_s_init_mac(adev)) -+ return -3; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111: configopt struct needs to be queried after full init */ -+ acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS); -+ } -+ -+ /* -+ * Set up transmit buffer administration -+ */ -+ init_acx_txbuf (adev); -+ -+ /* -+ * Windows driver writes 0x01000000 to register 0x288, RADIO_CTL, if the form factor -+ * is 3. It also write protects the EEPROM by writing 1<<9 to GPIO_OUT -+ */ -+ if (adev->form_factor == 3) { -+ set_regbits (adev, 0x288, 0x01000000); -+ set_regbits (adev, 0x298, 1<<9); -+ } -+ -+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */ -+ if (OK != acxmem_read_eeprom_byte(adev, 0x05, &adev->eeprom_version)) -+ return -2; -+ -+ acx_s_parse_configoption(adev, &co); -+ acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */ -+ acx_display_hardware_details(adev); -+ -+ return 0; -+} -+ -+static int acx_init_netdev(struct net_device *ndev, struct device *dev, int base_addr, int addr_size, int irq) -+{ -+ const char *chip_name; -+ int result = -EIO; -+ int err; -+ u8 chip_type; -+ acx_device_t *adev = NULL; -+ -+ FN_ENTER; -+ -+ /* FIXME: prism54 calls pci_set_mwi() here, -+ * should we do/support the same? */ -+ -+ /* chiptype is u8 but id->driver_data is ulong -+ ** Works for now (possible values are 1 and 2) */ -+ chip_type = CHIPTYPE_ACX100; -+ /* acx100 and acx111 have different PCI memory regions */ -+ if (chip_type == CHIPTYPE_ACX100) { -+ chip_name = "ACX100"; -+ } else if (chip_type == CHIPTYPE_ACX111) { -+ chip_name = "ACX111"; -+ } else { -+ printk("acx: unknown chip type 0x%04X\n", chip_type); -+ goto fail_unknown_chiptype; -+ } -+ -+ printk("acx: found %s-based wireless network card\n", chip_name); -+ log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug); -+ -+ -+ dev_set_drvdata(dev, ndev); -+ -+ ether_setup(ndev); -+ -+ ndev->irq = irq; -+ -+ ndev->base_addr = base_addr; -+printk (KERN_INFO "memwinbase=%lx memwinsize=%u\n",memwin.Base,memwin.Size); -+ if (addr_size == 0 || ndev->irq == 0) -+ goto fail_hw_params; -+ ndev->open = &acxmem_e_open; -+ ndev->stop = &acxmem_e_close; -+ //pdev->dev.release = &acxmem_e_release; -+ ndev->hard_start_xmit = &acx_i_start_xmit; -+ ndev->get_stats = &acx_e_get_stats; -+#if IW_HANDLER_VERSION <= 5 -+ ndev->get_wireless_stats = &acx_e_get_wireless_stats; -+#endif -+ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -+ ndev->set_multicast_list = &acxmem_i_set_multicast_list; -+ ndev->tx_timeout = &acxmem_i_tx_timeout; -+ ndev->change_mtu = &acx_e_change_mtu; -+ ndev->watchdog_timeo = 4 * HZ; -+ -+ adev = ndev2adev(ndev); -+ spin_lock_init(&adev->lock); /* initial state: unlocked */ -+ spin_lock_init(&adev->txbuf_lock); -+ /* We do not start with downed sem: we want PARANOID_LOCKING to work */ -+ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ -+ /* since nobody can see new netdev yet, we can as well -+ ** just _presume_ that we're under sem (instead of actually taking it): */ -+ /* acx_sem_lock(adev); */ -+ adev->dev = dev; -+ adev->ndev = ndev; -+ adev->dev_type = DEVTYPE_MEM; -+ adev->chip_type = chip_type; -+ adev->chip_name = chip_name; -+ adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111; -+ adev->membase = (volatile u32 *) ndev->base_addr; -+ adev->iobase = (volatile u32 *) ioremap_nocache (ndev->base_addr, addr_size); -+ /* to find crashes due to weird driver access -+ * to unconfigured interface (ifup) */ -+ adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead; -+ -+#if defined(NONESSENTIAL_FEATURES) -+ acx_show_card_eeprom_id(adev); -+#endif /* NONESSENTIAL_FEATURES */ -+ -+#ifdef SET_MODULE_OWNER -+ SET_MODULE_OWNER(ndev); -+#endif -+ // need to fix that @@ -+ SET_NETDEV_DEV(ndev, dev); -+ -+ log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq); -+ -+ /* ok, pci setup is finished, now start initializing the card */ -+ -+ if (OK != acxmem_complete_hw_reset (adev)) -+ goto fail_reset; -+ -+ /* -+ * Set up default things for most of the card settings. -+ */ -+ acx_s_set_defaults(adev); -+ -+ /* Register the card, AFTER everything else has been set up, -+ * since otherwise an ioctl could step on our feet due to -+ * firmware operations happening in parallel or uninitialized data */ -+ err = register_netdev(ndev); -+ if (OK != err) { -+ printk("acx: register_netdev() FAILED: %d\n", err); -+ goto fail_register_netdev; -+ } -+ -+ acx_proc_register_entries(ndev); -+ -+ /* Now we have our device, so make sure the kernel doesn't try -+ * to send packets even though we're not associated to a network yet */ -+ acx_stop_queue(ndev, "on probe"); -+ acx_carrier_off(ndev, "on probe"); -+ -+ /* -+ * Set up a default monitor type so that poor combinations of initialization -+ * sequences in monitor mode don't end up destroying the hardware type. -+ */ -+ adev->monitor_type = ARPHRD_ETHER; -+ -+ /* -+ * Register to receive inetaddr notifier changes. This will allow us to -+ * catch if the user changes the MAC address of the interface. -+ */ -+ register_netdevice_notifier(&acx_netdev_notifier); -+ -+ /* after register_netdev() userspace may start working with dev -+ * (in particular, on other CPUs), we only need to up the sem */ -+ /* acx_sem_unlock(adev); */ -+ -+ printk("acx "ACX_RELEASE": net device %s, driver compiled " -+ "against wireless extensions %d and Linux %s\n", -+ ndev->name, WIRELESS_EXT, UTS_RELEASE); -+ -+#if CMD_DISCOVERY -+ great_inquisitor(adev); -+#endif -+ -+ result = OK; -+ goto done; -+ -+ /* error paths: undo everything in reverse order... */ -+ -+fail_register_netdev: -+ -+ acxmem_s_delete_dma_regions(adev); -+ -+fail_reset: -+fail_hw_params: -+ free_netdev(ndev); -+fail_unknown_chiptype: -+ -+ -+done: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_remove -+** -+** Shut device down (if not hot unplugged) -+** and deallocate PCI resources for the acx chip. -+** -+** pdev - ptr to PCI device structure containing info about pci configuration -+*/ -+static int __devexit -+acxmem_e_remove(struct pcmcia_device *link) -+{ -+ struct net_device *ndev; -+ acx_device_t *adev; -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ ndev = ((local_info_t*)link->priv)->ndev; -+ if (!ndev) { -+ log(L_DEBUG, "%s: card is unused. Skipping any release code\n", -+ __func__); -+ goto end; -+ } -+ -+ adev = ndev2adev(ndev); -+ -+ /* If device wasn't hot unplugged... */ -+ if (adev_present(adev)) { -+ -+ acx_sem_lock(adev); -+ -+ /* disable both Tx and Rx to shut radio down properly */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); -+ -+#ifdef REDUNDANT -+ /* put the eCPU to sleep to save power -+ * Halting is not possible currently, -+ * since not supported by all firmware versions */ -+ acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0); -+#endif -+ acx_lock(adev, flags); -+ -+ /* disable power LED to save power :-) */ -+ log(L_INIT, "switching off power LED to save power\n"); -+ acxmem_l_power_led(adev, 0); -+ -+ /* stop our eCPU */ -+ if (IS_ACX111(adev)) { -+ /* FIXME: does this actually keep halting the eCPU? -+ * I don't think so... -+ */ -+ acxmem_l_reset_mac(adev); -+ } else { -+ u16 temp; -+ -+ /* halt eCPU */ -+ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; -+ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); -+ write_flush(adev); -+ } -+ -+ acx_unlock(adev, flags); -+ -+ acx_sem_unlock(adev); -+ } -+ -+ -+ /* -+ * Unregister the notifier chain -+ */ -+ unregister_netdevice_notifier(&acx_netdev_notifier); -+ -+ /* unregister the device to not let the kernel -+ * (e.g. ioctls) access a half-deconfigured device -+ * NB: this will cause acxmem_e_close() to be called, -+ * thus we shouldn't call it under sem! */ -+ log(L_INIT, "removing device %s\n", ndev->name); -+ unregister_netdev(ndev); -+ -+ /* unregister_netdev ensures that no references to us left. -+ * For paranoid reasons we continue to follow the rules */ -+ acx_sem_lock(adev); -+ -+ if (adev->dev_state_mask & ACX_STATE_IFACE_UP) { -+ acxmem_s_down(ndev); -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ } -+ -+ acx_proc_unregister_entries(ndev); -+ -+ acxmem_s_delete_dma_regions(adev); -+ -+ /* finally, clean up PCI bus state */ -+ if (adev->iobase) iounmap((void *)adev->iobase); -+ -+ acx_sem_unlock(adev); -+ -+ /* Free netdev (quite late, -+ * since otherwise we might get caught off-guard -+ * by a netdev timeout handler execution -+ * expecting to see a working dev...) */ -+ free_netdev(ndev); -+ -+ printk ("e_remove done\n"); -+end: -+ FN_EXIT0; -+ -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** TODO: PM code needs to be fixed / debugged / tested. -+*/ -+#ifdef CONFIG_PM -+static int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+acxmem_e_suspend( struct net_device *ndev, pm_message_t state) -+#else -+acxmem_e_suspend( struct net_device *ndev, u32 state) -+#endif -+{ -+ FN_ENTER; -+ acx_device_t *adev; -+ printk("acx: suspend handler is experimental!\n"); -+ printk("sus: dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ goto end; -+ // @@ need to get it from link or something like that -+ adev = ndev2adev(ndev); -+ printk("sus: adev %p\n", adev); -+ -+ acx_sem_lock(adev); -+ -+ netif_device_detach(adev->ndev); /* this one cannot sleep */ -+ acxmem_s_down(adev->ndev); -+ /* down() does not set it to 0xffff, but here we really want that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ acxmem_s_delete_dma_regions(adev); -+ -+ /* -+ * Turn the ACX chip off. -+ */ -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+static void -+fw_resumer(struct work_struct *notused) -+{ -+ acx_device_t *adev; -+ struct net_device *ndev = resume_ndev; -+ -+ printk("acx: resume handler is experimental!\n"); -+ printk("rsm: got dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ return; -+ -+ adev = ndev2adev(ndev); -+ printk("rsm: got adev %p\n", adev); -+ -+ acx_sem_lock(adev); -+ -+ /* -+ * Turn on the ACX. -+ */ -+ -+ acxmem_complete_hw_reset (adev); -+ -+ /* -+ * done by acx_s_set_defaults for initial startup -+ */ -+ acxmem_set_interrupt_mask(adev); -+ -+ printk ("rsm: bringing up interface\n"); -+ SET_BIT (adev->set_mask, GETSET_ALL); -+ acxmem_s_up(ndev); -+ printk("rsm: acx up done\n"); -+ -+ /* now even reload all card parameters as they were before suspend, -+ * and possibly be back in the network again already :-) -+ */ -+ /* - most settings updated in acxmem_s_up() -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) { -+ adev->set_mask = GETSET_ALL; -+ acx_s_update_card_settings(adev); -+ printk("rsm: settings updated\n"); -+ } -+ */ -+ netif_device_attach(ndev); -+ printk("rsm: device attached\n"); -+ -+ acx_sem_unlock(adev); -+} -+ -+DECLARE_WORK( fw_resume_work, fw_resumer ); -+ -+static int -+acxmem_e_resume(struct pcmcia_device *link) -+{ -+ FN_ENTER; -+ -+ //resume_pdev = pdev; -+ schedule_work( &fw_resume_work ); -+ -+ FN_EXIT0; -+ return OK; -+} -+#endif /* CONFIG_PM */ -+ -+ -+/*********************************************************************** -+** acxmem_s_up -+** -+** This function is called by acxmem_e_open (when ifconfig sets the device as up) -+** -+** Side effects: -+** - Enables on-card interrupt requests -+** - calls acx_s_start -+*/ -+ -+static void -+enable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask); -+ write_reg16(adev, IO_ACX_FEMR, 0x8000); -+ adev->irqs_active = 1; -+ FN_EXIT0; -+} -+ -+static void -+acxmem_s_up(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ enable_acx_irq(adev); -+ acx_unlock(adev, flags); -+ -+ /* acx fw < 1.9.3.e has a hardware timer, and older drivers -+ ** used to use it. But we don't do that anymore, our OS -+ ** has reliable software timers */ -+ init_timer(&adev->mgmt_timer); -+ adev->mgmt_timer.function = acx_i_timer; -+ adev->mgmt_timer.data = (unsigned long)adev; -+ -+ /* Need to set ACX_STATE_IFACE_UP first, or else -+ ** timer won't be started by acx_set_status() */ -+ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ /* actual scan cmd will happen in start() */ -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); break; -+ case ACX_MODE_3_AP: -+ case ACX_MODE_MONITOR: -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break; -+ } -+ -+ acx_s_start(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_down -+** -+** This disables the netdevice -+** -+** Side effects: -+** - disables on-card interrupt request -+*/ -+ -+static void -+disable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ -+ /* I guess mask is not 0xffff because acx100 won't signal -+ ** cmd completion then (needed for ifup). -+ ** Someone with acx100 please confirm */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ adev->irqs_active = 0; -+ FN_EXIT0; -+} -+ -+static void -+acxmem_s_down(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ /* Disable IRQs first, so that IRQs cannot race with us */ -+ /* then wait until interrupts have finished executing on other CPUs */ -+ acx_lock(adev, flags); -+ disable_acx_irq(adev); -+ synchronize_irq(adev->pdev->irq); -+ acx_unlock(adev, flags); -+ -+ /* we really don't want to have an asynchronous tasklet disturb us -+ ** after something vital for its job has been shut down, so -+ ** end all remaining work now. -+ ** -+ ** NB: carrier_off (done by set_status below) would lead to -+ ** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK(). -+ ** That's why we do FLUSH first. -+ ** -+ ** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK() -+ ** waits for acx_e_after_interrupt_task to complete if it is running -+ ** on another CPU, but acx_e_after_interrupt_task -+ ** will sleep on sem forever, because it is taken by us! -+ ** Work around that by temporary sem unlock. -+ ** This will fail miserably if we'll be hit by concurrent -+ ** iwconfig or something in between. TODO! */ -+ acx_sem_unlock(adev); -+ FLUSH_SCHEDULED_WORK(); -+ acx_sem_lock(adev); -+ -+ /* This is possible: -+ ** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task -> -+ ** -> set_status(ASSOCIATED) -> wake_queue() -+ ** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK -+ ** lock/unlock is just paranoia, maybe not needed */ -+ acx_lock(adev, flags); -+ acx_stop_queue(ndev, "on ifdown"); -+ acx_set_status(adev, ACX_STATUS_0_STOPPED); -+ acx_unlock(adev, flags); -+ -+ /* kernel/timer.c says it's illegal to del_timer_sync() -+ ** a timer which restarts itself. We guarantee this cannot -+ ** ever happen because acx_i_timer() never does this if -+ ** status is ACX_STATUS_0_STOPPED */ -+ del_timer_sync(&adev->mgmt_timer); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_open -+** -+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP -+** from clear to set. In other words: ifconfig up. -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxmem_e_open(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = OK; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ acx_init_task_scheduler(adev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */ -+ -+#if 0 -+ /* request shared IRQ handler */ -+ if (request_irq(ndev->irq, acxmem_i_interrupt, SA_INTERRUPT, ndev->name, ndev)) { -+ printk("%s: request_irq FAILED\n", ndev->name); -+ result = -EAGAIN; -+ goto done; -+ } -+ set_irq_type (ndev->irq, IRQT_FALLING); -+ log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq); -+#endif -+ -+ /* ifup device */ -+ acxmem_s_up(ndev); -+ -+ /* We don't currently have to do anything else. -+ * The setup of the MAC should be subsequently completed via -+ * the mlme commands. -+ * Higher layers know we're ready from dev->start==1 and -+ * dev->tbusy==0. Our rx path knows to pass up received/ -+ * frames because of dev->flags&IFF_UP is true. -+ */ -+done: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_close -+** -+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP -+** from set to clear. I.e. called by "ifconfig DEV down" -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxmem_e_close(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* ifdown device */ -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ if (netif_device_present(ndev)) { -+ acxmem_s_down(ndev); -+ } -+ -+ /* disable all IRQs, release shared IRQ handler */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ free_irq(ndev->irq, ndev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */ -+ -+ /* We currently don't have to do anything else. -+ * Higher layers know we're not ready from dev->start==0 and -+ * dev->tbusy==1. Our rx path knows to not pass up received -+ * frames because of dev->flags&IFF_UP is false. -+ */ -+ acx_sem_unlock(adev); -+ -+ log(L_INIT, "closed device\n"); -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_tx_timeout -+** -+** Called from network core. Must not sleep! -+*/ -+static void -+acxmem_i_tx_timeout(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ unsigned int tx_num_cleaned; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* clean processed tx descs, they may have been completely full */ -+ tx_num_cleaned = acxmem_l_clean_txdesc(adev); -+ -+ /* nothing cleaned, yet (almost) no free buffers available? -+ * --> clean all tx descs, no matter which status!! -+ * Note that I strongly suspect that doing emergency cleaning -+ * may confuse the firmware. This is a last ditch effort to get -+ * ANYTHING to work again... -+ * -+ * TODO: it's best to simply reset & reinit hw from scratch... -+ */ -+ if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) { -+ printk("%s: FAILED to free any of the many full tx buffers. " -+ "Switching to emergency freeing. " -+ "Please report!\n", ndev->name); -+ acxmem_l_clean_txdesc_emergency(adev); -+ } -+ -+ if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status)) -+ acx_wake_queue(ndev, "after tx timeout"); -+ -+ /* stall may have happened due to radio drift, so recalib radio */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ -+ /* do unimportant work last */ -+ printk("%s: tx timeout!\n", ndev->name); -+ adev->stats.tx_errors++; -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_set_multicast_list -+** FIXME: most likely needs refinement -+*/ -+static void -+acxmem_i_set_multicast_list(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* firmwares don't have allmulti capability, -+ * so just use promiscuous mode instead in this case. */ -+ if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) { -+ SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ /* let kernel know in case *we* needed to set promiscuous */ -+ ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI); -+ } else { -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI); -+ } -+ -+ /* cannot update card settings directly here, atomic context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_l_process_rxdesc -+** -+** Called directly and only from the IRQ handler -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_rxbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_rxbuffer(const acx_device_t *adev) -+{ -+ register const struct rxhostdesc *rxhostdesc; -+ int i; -+ /* no FN_ENTER here, we don't want that */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ if (unlikely(!rxhostdesc)) return; -+ for (i = 0; i < RX_CNT; i++) { -+ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) -+ printk("rx: buf %d full\n", i); -+ rxhostdesc++; -+ } -+} -+#endif -+ -+static void -+acxmem_l_process_rxdesc(acx_device_t *adev) -+{ -+ register rxhostdesc_t *hostdesc; -+ register rxdesc_t *rxdesc; -+ unsigned count, tail; -+ u32 addr; -+ u8 Ctl_8; -+ -+ FN_ENTER; -+ -+ if (unlikely(acx_debug & L_BUFR)) -+ log_rxbuffer(adev); -+ -+ /* First, have a loop to determine the first descriptor that's -+ * full, just in case there's a mismatch between our current -+ * rx_tail and the full descriptor we're supposed to handle. */ -+ tail = adev->rx_tail; -+ count = RX_CNT; -+ while (1) { -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ rxdesc = &adev->rxdesc_start[tail]; -+ /* advance tail regardless of outcome of the below test */ -+ tail = (tail + 1) % RX_CNT; -+ -+ /* -+ * Unlike the PCI interface, where the ACX can write directly to -+ * the host descriptors, on the slave memory interface we have to -+ * pull these. All we really need to do is check the Ctl_8 field -+ * in the rx descriptor on the ACX, which should be 0x11000000 if -+ * we should process it. -+ */ -+ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ if ((Ctl_8 & DESC_CTL_HOSTOWN) && -+ (Ctl_8 & DESC_CTL_ACXDONE)) -+ break; /* found it! */ -+ -+ if (unlikely(!--count)) /* hmm, no luck: all descs empty, bail out */ -+ goto end; -+ } -+ -+ /* now process descriptors, starting with the first we figured out */ -+ while (1) { -+ log(L_BUFR, "rx: tail=%u Ctl_8=%02X\n", tail, Ctl_8); -+ /* -+ * If the ACX has CTL_RECLAIM set on this descriptor there -+ * is no buffer associated; it just wants us to tell it to -+ * reclaim the memory. -+ */ -+ if (!(Ctl_8 & DESC_CTL_RECLAIM)) { -+ -+ /* -+ * slave interface - pull data now -+ */ -+ hostdesc->length = read_slavemem16 (adev, (u32) &(rxdesc->total_length)); -+ -+ /* -+ * hostdesc->data is an rxbuffer_t, which includes header information, -+ * but the length in the data packet doesn't. The header information -+ * takes up an additional 12 bytes, so add that to the length we copy. -+ */ -+ addr = read_slavemem32 (adev, (u32) &(rxdesc->ACXMemPtr)); -+ if (addr) { -+ /* -+ * How can &(rxdesc->ACXMemPtr) above ever be zero? Looks like we -+ * get that now and then - try to trap it for debug. -+ */ -+ if (addr & 0xffff0000) { -+ printk("rxdesc 0x%08x\n", (u32) rxdesc); -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("Bad access!"); -+ } -+ chaincopy_from_slavemem (adev, (u8 *) hostdesc->data, addr, -+ hostdesc->length + -+ (u32) &((rxbuffer_t *)0)->hdr_a3); -+ acx_l_process_rxbuf(adev, hostdesc->data); -+ } -+ } -+ else { -+ printk ("rx reclaim only!\n"); -+ } -+ -+ hostdesc->Status = 0; -+ -+ /* -+ * Let the ACX know we're done. -+ */ -+ CLEAR_BIT (Ctl_8, DESC_CTL_HOSTOWN); -+ SET_BIT (Ctl_8, DESC_CTL_HOSTDONE); -+ SET_BIT (Ctl_8, DESC_CTL_RECLAIM); -+ write_slavemem8 (adev, (u32) &rxdesc->Ctl_8, Ctl_8); -+ -+ /* -+ * Now tell the ACX we've finished with the receive buffer so -+ * it can finish the reclaim. -+ */ -+ write_reg16 (adev, IO_ACX_INT_TRIG, INT_TRIG_RXPRC); -+ -+ /* ok, descriptor is handled, now check the next descriptor */ -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ rxdesc = &adev->rxdesc_start[tail]; -+ -+ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ -+ /* if next descriptor is empty, then bail out */ -+ if (!(Ctl_8 & DESC_CTL_HOSTOWN) || !(Ctl_8 & DESC_CTL_ACXDONE)) -+ break; -+ -+ tail = (tail + 1) % RX_CNT; -+ } -+end: -+ adev->rx_tail = tail; -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_interrupt -+** -+** IRQ handler (atomic context, must not sleep, blah, blah) -+*/ -+ -+/* scan is complete. all frames now on the receive queue are valid */ -+#define INFO_SCAN_COMPLETE 0x0001 -+#define INFO_WEP_KEY_NOT_FOUND 0x0002 -+/* hw has been reset as the result of a watchdog timer timeout */ -+#define INFO_WATCH_DOG_RESET 0x0003 -+/* failed to send out NULL frame from PS mode notification to AP */ -+/* recommended action: try entering 802.11 PS mode again */ -+#define INFO_PS_FAIL 0x0004 -+/* encryption/decryption process on a packet failed */ -+#define INFO_IV_ICV_FAILURE 0x0005 -+ -+/* Info mailbox format: -+2 bytes: type -+2 bytes: status -+more bytes may follow -+ rumors say about status: -+ 0x0000 info available (set by hw) -+ 0x0001 information received (must be set by host) -+ 0x1000 info available, mailbox overflowed (messages lost) (set by hw) -+ but in practice we've seen: -+ 0x9000 when we did not set status to 0x0001 on prev message -+ 0x1001 when we did set it -+ 0x0000 was never seen -+ conclusion: this is really a bitfield: -+ 0x1000 is 'info available' bit -+ 'mailbox overflowed' bit is 0x8000, not 0x1000 -+ value of 0x0000 probably means that there are no messages at all -+ P.S. I dunno how in hell hw is supposed to notice that messages are lost - -+ it does NOT clear bit 0x0001, and this bit will probably stay forever set -+ after we set it once. Let's hope this will be fixed in firmware someday -+*/ -+ -+static void -+handle_info_irq(acx_device_t *adev) -+{ -+#if ACX_DEBUG -+ static const char * const info_type_msg[] = { -+ "(unknown)", -+ "scan complete", -+ "WEP key not found", -+ "internal watchdog reset was done", -+ "failed to send powersave (NULL frame) notification to AP", -+ "encrypt/decrypt on a packet has failed", -+ "TKIP tx keys disabled", -+ "TKIP rx keys disabled", -+ "TKIP rx: key ID not found", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "TKIP IV value exceeds thresh" -+ }; -+#endif -+ u32 info_type, info_status; -+ -+ info_type = read_slavemem32 (adev, (u32) adev->info_area); -+ -+ info_status = (info_type >> 16); -+ info_type = (u16)info_type; -+ -+ /* inform fw that we have read this info message */ -+ write_slavemem32(adev, (u32) adev->info_area, info_type | 0x00010000); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK); -+ write_flush(adev); -+ -+ log(L_CTL, "info_type:%04X info_status:%04X\n", -+ info_type, info_status); -+ -+ log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n", -+ info_status, info_type, -+ info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ? -+ 0 : info_type] -+ ); -+} -+ -+ -+static void -+log_unusual_irq(u16 irqtype) { -+ /* -+ if (!printk_ratelimit()) -+ return; -+ */ -+ -+ printk("acx: got"); -+ if (irqtype & HOST_INT_TX_XFER) { -+ printk(" Tx_Xfer"); -+ } -+ if (irqtype & HOST_INT_RX_COMPLETE) { -+ printk(" Rx_Complete"); -+ } -+ if (irqtype & HOST_INT_DTIM) { -+ printk(" DTIM"); -+ } -+ if (irqtype & HOST_INT_BEACON) { -+ printk(" Beacon"); -+ } -+ if (irqtype & HOST_INT_TIMER) { -+ log(L_IRQ, " Timer"); -+ } -+ if (irqtype & HOST_INT_KEY_NOT_FOUND) { -+ printk(" Key_Not_Found"); -+ } -+ if (irqtype & HOST_INT_IV_ICV_FAILURE) { -+ printk(" IV_ICV_Failure (crypto)"); -+ } -+ /* HOST_INT_CMD_COMPLETE */ -+ /* HOST_INT_INFO */ -+ if (irqtype & HOST_INT_OVERFLOW) { -+ printk(" Overflow"); -+ } -+ if (irqtype & HOST_INT_PROCESS_ERROR) { -+ printk(" Process_Error"); -+ } -+ /* HOST_INT_SCAN_COMPLETE */ -+ if (irqtype & HOST_INT_FCS_THRESHOLD) { -+ printk(" FCS_Threshold"); -+ } -+ if (irqtype & HOST_INT_UNKNOWN) { -+ printk(" Unknown"); -+ } -+ printk(" IRQ(s)\n"); -+} -+ -+ -+static void -+update_link_quality_led(acx_device_t *adev) -+{ -+ int qual; -+ -+ qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise); -+ if (qual > adev->brange_max_quality) -+ qual = adev->brange_max_quality; -+ -+ if (time_after(jiffies, adev->brange_time_last_state_change + -+ (HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) { -+ acxmem_l_power_led(adev, (adev->brange_last_state == 0)); -+ adev->brange_last_state ^= 1; /* toggle */ -+ adev->brange_time_last_state_change = jiffies; -+ } -+} -+ -+ -+#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* a la orinoco.c */ -+ -+static irqreturn_t -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+acxmem_i_interrupt(int irq, void *dev_id) -+#else -+acxmwm_i_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+#endif -+{ -+ acx_device_t *adev; -+ unsigned long flags; -+ unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY; -+ register u16 irqtype; -+ u16 unmasked; -+ -+ adev = ndev2adev((struct net_device*)dev_id); -+ -+ /* LOCKING: can just spin_lock() since IRQs are disabled anyway. -+ * I am paranoid */ -+ acx_lock(adev, flags); -+ -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ if (unlikely(0xffff == unmasked)) { -+ /* 0xffff value hints at missing hardware, -+ * so don't do anything. -+ * Not very clean, but other drivers do the same... */ -+ log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n"); -+ goto none; -+ } -+ -+ /* We will check only "interesting" IRQ types */ -+ irqtype = unmasked & ~adev->irq_mask; -+ if (!irqtype) { -+ /* We are on a shared IRQ line and it wasn't our IRQ */ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n", -+ unmasked, adev->irq_mask); -+ goto none; -+ } -+ -+ /* Done here because IRQ_NONEs taking three lines of log -+ ** drive me crazy */ -+ FN_ENTER; -+ -+#define IRQ_ITERATE 1 -+#if IRQ_ITERATE -+if (jiffies != adev->irq_last_jiffies) { -+ adev->irq_loops_this_jiffy = 0; -+ adev->irq_last_jiffies = jiffies; -+} -+ -+/* safety condition; we'll normally abort loop below -+ * in case no IRQ type occurred */ -+while (likely(--irqcount)) { -+#endif -+ /* ACK all IRQs ASAP */ -+ write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff); -+ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n", -+ unmasked, adev->irq_mask, irqtype); -+ -+ /* Handle most important IRQ types first */ -+ if (irqtype & HOST_INT_RX_DATA) { -+ log(L_IRQ, "got Rx_Data IRQ\n"); -+ acxmem_l_process_rxdesc(adev); -+ } -+ if (irqtype & HOST_INT_TX_COMPLETE) { -+ log(L_IRQ, "got Tx_Complete IRQ\n"); -+ /* don't clean up on each Tx complete, wait a bit -+ * unless we're going towards full, in which case -+ * we do it immediately, too (otherwise we might lockup -+ * with a full Tx buffer if we go into -+ * acxmem_l_clean_txdesc() at a time when we won't wakeup -+ * the net queue in there for some reason...) */ -+ if (adev->tx_free <= TX_START_CLEAN) { -+#if TX_CLEANUP_IN_SOFTIRQ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP); -+#else -+ acxmem_l_clean_txdesc(adev); -+#endif -+ } -+ } -+ -+ /* Less frequent ones */ -+ if (irqtype & (0 -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ | HOST_INT_SCAN_COMPLETE -+ )) { -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ log(L_IRQ, "got Command_Complete IRQ\n"); -+ /* save the state for the running issue_cmd() */ -+ SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE); -+ } -+ if (irqtype & HOST_INT_INFO) { -+ handle_info_irq(adev); -+ } -+ if (irqtype & HOST_INT_SCAN_COMPLETE) { -+ log(L_IRQ, "got Scan_Complete IRQ\n"); -+ /* need to do that in process context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN); -+ /* remember that fw is not scanning anymore */ -+ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); -+ } -+ } -+ -+ /* These we just log, but either they happen rarely -+ * or we keep them masked out */ -+ if (irqtype & (0 -+ /* | HOST_INT_RX_DATA */ -+ /* | HOST_INT_TX_COMPLETE */ -+ | HOST_INT_TX_XFER -+ | HOST_INT_RX_COMPLETE -+ | HOST_INT_DTIM -+ | HOST_INT_BEACON -+ | HOST_INT_TIMER -+ | HOST_INT_KEY_NOT_FOUND -+ | HOST_INT_IV_ICV_FAILURE -+ /* | HOST_INT_CMD_COMPLETE */ -+ /* | HOST_INT_INFO */ -+ | HOST_INT_OVERFLOW -+ | HOST_INT_PROCESS_ERROR -+ /* | HOST_INT_SCAN_COMPLETE */ -+ | HOST_INT_FCS_THRESHOLD -+ | HOST_INT_UNKNOWN -+ )) { -+ log_unusual_irq(irqtype); -+ } -+ -+#if IRQ_ITERATE -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ irqtype = unmasked & ~adev->irq_mask; -+ /* Bail out if no new IRQ bits or if all are masked out */ -+ if (!irqtype) -+ break; -+ -+ if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) { -+ printk(KERN_ERR "acx: too many interrupts per jiffy!\n"); -+ /* Looks like card floods us with IRQs! Try to stop that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ /* This will short-circuit all future attempts to handle IRQ. -+ * We cant do much more... */ -+ adev->irq_mask = 0; -+ break; -+ } -+} -+#endif -+ /* Routine to perform blink with range */ -+ if (unlikely(adev->led_power == 2)) -+ update_link_quality_led(adev); -+ -+/* handled: */ -+ /* write_flush(adev); - not needed, last op was read anyway */ -+ acx_unlock(adev, flags); -+ FN_EXIT0; -+ return IRQ_HANDLED; -+ -+none: -+ acx_unlock(adev, flags); -+ return IRQ_NONE; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_power_led -+*/ -+void -+acxmem_l_power_led(acx_device_t *adev, int enable) -+{ -+ u16 gpio_pled = IS_ACX111(adev) ? 0x0040 : 0x0800; -+ -+ /* A hack. Not moving message rate limiting to adev->xxx -+ * (it's only a debug message after all) */ -+ static int rate_limit = 0; -+ -+ if (rate_limit++ < 3) -+ log(L_IOCTL, "Please report in case toggling the power " -+ "LED doesn't work for your card!\n"); -+ if (enable) -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled); -+ else -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled); -+} -+ -+ -+/*********************************************************************** -+** Ioctls -+*/ -+ -+/*********************************************************************** -+*/ -+int -+acx111pci_ioctl_info( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+#if ACX_DEBUG > 1 -+ acx_device_t *adev = ndev2adev(ndev); -+ rxdesc_t *rxdesc; -+ txdesc_t *txdesc; -+ rxhostdesc_t *rxhostdesc; -+ txhostdesc_t *txhostdesc; -+ struct acx111_ie_memoryconfig memconf; -+ struct acx111_ie_queueconfig queueconf; -+ unsigned long flags; -+ int i; -+ char memmap[0x34]; -+ char rxconfig[0x8]; -+ char fcserror[0x8]; -+ char ratefallback[0x5]; -+ -+ if ( !(acx_debug & (L_IOCTL|L_DEBUG)) ) -+ return OK; -+ /* using printk() since we checked debug flag already */ -+ -+ acx_sem_lock(adev); -+ -+ if (!IS_ACX111(adev)) { -+ printk("acx111-specific function called " -+ "with non-acx111 chip, aborting\n"); -+ goto end_ok; -+ } -+ -+ /* get Acx111 Memory Configuration */ -+ memset(&memconf, 0, sizeof(memconf)); -+ /* BTW, fails with 12 (Write only) error code. -+ ** Retained for easy testing of issue_cmd error handling :) */ -+ printk ("Interrogating queue config\n"); -+ acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG); -+ printk ("done with queue config\n"); -+ -+ /* get Acx111 Queue Configuration */ -+ memset(&queueconf, 0, sizeof(queueconf)); -+ printk ("Interrogating mem config options\n"); -+ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); -+ printk ("done with mem config options\n"); -+ -+ /* get Acx111 Memory Map */ -+ memset(memmap, 0, sizeof(memmap)); -+ printk ("Interrogating mem map\n"); -+ acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP); -+ printk ("done with mem map\n"); -+ -+ /* get Acx111 Rx Config */ -+ memset(rxconfig, 0, sizeof(rxconfig)); -+ printk ("Interrogating rxconfig\n"); -+ acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG); -+ printk ("done with queue rxconfig\n"); -+ -+ /* get Acx111 fcs error count */ -+ memset(fcserror, 0, sizeof(fcserror)); -+ printk ("Interrogating fcs err count\n"); -+ acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT); -+ printk ("done with err count\n"); -+ -+ /* get Acx111 rate fallback */ -+ memset(ratefallback, 0, sizeof(ratefallback)); -+ printk ("Interrogating rate fallback\n"); -+ acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK); -+ printk ("done with rate fallback\n"); -+ -+ /* force occurrence of a beacon interrupt */ -+ /* TODO: comment why is this necessary */ -+ write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON); -+ -+ /* dump Acx111 Mem Configuration */ -+ printk("dump mem config:\n" -+ "data read: %d, struct size: %d\n" -+ "Number of stations: %1X\n" -+ "Memory block size: %1X\n" -+ "tx/rx memory block allocation: %1X\n" -+ "count rx: %X / tx: %X queues\n" -+ "options %1X\n" -+ "fragmentation %1X\n" -+ "Rx Queue 1 Count Descriptors: %X\n" -+ "Rx Queue 1 Host Memory Start: %X\n" -+ "Tx Queue 1 Count Descriptors: %X\n" -+ "Tx Queue 1 Attributes: %X\n", -+ memconf.len, (int) sizeof(memconf), -+ memconf.no_of_stations, -+ memconf.memory_block_size, -+ memconf.tx_rx_memory_block_allocation, -+ memconf.count_rx_queues, memconf.count_tx_queues, -+ memconf.options, -+ memconf.fragmentation, -+ memconf.rx_queue1_count_descs, -+ acx2cpu(memconf.rx_queue1_host_rx_start), -+ memconf.tx_queue1_count_descs, -+ memconf.tx_queue1_attributes); -+ -+ /* dump Acx111 Queue Configuration */ -+ printk("dump queue head:\n" -+ "data read: %d, struct size: %d\n" -+ "tx_memory_block_address (from card): %X\n" -+ "rx_memory_block_address (from card): %X\n" -+ "rx1_queue address (from card): %X\n" -+ "tx1_queue address (from card): %X\n" -+ "tx1_queue attributes (from card): %X\n", -+ queueconf.len, (int) sizeof(queueconf), -+ queueconf.tx_memory_block_address, -+ queueconf.rx_memory_block_address, -+ queueconf.rx1_queue_address, -+ queueconf.tx1_queue_address, -+ queueconf.tx1_attributes); -+ -+ /* dump Acx111 Mem Map */ -+ printk("dump mem map:\n" -+ "data read: %d, struct size: %d\n" -+ "Code start: %X\n" -+ "Code end: %X\n" -+ "WEP default key start: %X\n" -+ "WEP default key end: %X\n" -+ "STA table start: %X\n" -+ "STA table end: %X\n" -+ "Packet template start: %X\n" -+ "Packet template end: %X\n" -+ "Queue memory start: %X\n" -+ "Queue memory end: %X\n" -+ "Packet memory pool start: %X\n" -+ "Packet memory pool end: %X\n" -+ "iobase: %p\n" -+ "iobase2: %p\n", -+ *((u16 *)&memmap[0x02]), (int) sizeof(memmap), -+ *((u32 *)&memmap[0x04]), -+ *((u32 *)&memmap[0x08]), -+ *((u32 *)&memmap[0x0C]), -+ *((u32 *)&memmap[0x10]), -+ *((u32 *)&memmap[0x14]), -+ *((u32 *)&memmap[0x18]), -+ *((u32 *)&memmap[0x1C]), -+ *((u32 *)&memmap[0x20]), -+ *((u32 *)&memmap[0x24]), -+ *((u32 *)&memmap[0x28]), -+ *((u32 *)&memmap[0x2C]), -+ *((u32 *)&memmap[0x30]), -+ adev->iobase, -+ adev->iobase2); -+ -+ /* dump Acx111 Rx Config */ -+ printk("dump rx config:\n" -+ "data read: %d, struct size: %d\n" -+ "rx config: %X\n" -+ "rx filter config: %X\n", -+ *((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig), -+ *((u16 *)&rxconfig[0x04]), -+ *((u16 *)&rxconfig[0x06])); -+ -+ /* dump Acx111 fcs error */ -+ printk("dump fcserror:\n" -+ "data read: %d, struct size: %d\n" -+ "fcserrors: %X\n", -+ *((u16 *)&fcserror[0x02]), (int) sizeof(fcserror), -+ *((u32 *)&fcserror[0x04])); -+ -+ /* dump Acx111 rate fallback */ -+ printk("dump rate fallback:\n" -+ "data read: %d, struct size: %d\n" -+ "ratefallback: %X\n", -+ *((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback), -+ *((u8 *)&ratefallback[0x04])); -+ -+ /* protect against IRQ */ -+ acx_lock(adev, flags); -+ -+ /* dump acx111 internal rx descriptor ring buffer */ -+ rxdesc = adev->rxdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump internal rxdesc %d:\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n" -+ "RxStatus (dynamic) 0x%X\n" -+ "Mod/Pre (dynamic) 0x%X\n", -+ i, -+ rxdesc, -+ acx2cpu(rxdesc->pNextDesc), -+ acx2cpu(rxdesc->ACXMemPtr), -+ rxdesc->Ctl_8, -+ rxdesc->rate, -+ rxdesc->error, -+ rxdesc->SNR); -+ rxdesc++; -+ } -+ -+ /* dump host rx descriptor ring buffer */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump host rxdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ rxhostdesc, -+ acx2cpu(rxhostdesc->data_phy), -+ rxhostdesc->data_offset, -+ le16_to_cpu(rxhostdesc->Ctl_16), -+ le16_to_cpu(rxhostdesc->length), -+ acx2cpu(rxhostdesc->desc_phy_next), -+ rxhostdesc->Status); -+ rxhostdesc++; -+ } -+ -+ /* dump acx111 internal tx descriptor ring buffer */ -+ txdesc = adev->txdesc_start; -+ -+ /* loop over complete transmit pool */ -+ if (txdesc) for (i = 0; i < TX_CNT; i++) { -+ printk("\ndump internal txdesc %d:\n" -+ "size 0x%X\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "host mem pointer (dynamic) 0x%X\n" -+ "length (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "CTL2 (dynamic) 0x%X\n" -+ "Status (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n", -+ i, -+ (int) sizeof(struct txdesc), -+ txdesc, -+ acx2cpu(txdesc->pNextDesc), -+ acx2cpu(txdesc->AcxMemPtr), -+ acx2cpu(txdesc->HostMemPtr), -+ le16_to_cpu(txdesc->total_length), -+ txdesc->Ctl_8, -+ txdesc->Ctl2_8, txdesc->error, -+ txdesc->u.r1.rate); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ -+ /* dump host tx descriptor ring buffer */ -+ -+ txhostdesc = adev->txhostdesc_start; -+ -+ /* loop over complete host send pool */ -+ if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) { -+ printk("\ndump host txdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ txhostdesc, -+ acx2cpu(txhostdesc->data_phy), -+ txhostdesc->data_offset, -+ le16_to_cpu(txhostdesc->Ctl_16), -+ le16_to_cpu(txhostdesc->length), -+ acx2cpu(txhostdesc->desc_phy_next), -+ le32_to_cpu(txhostdesc->Status)); -+ txhostdesc++; -+ } -+ -+ /* write_reg16(adev, 0xb4, 0x4); */ -+ -+ acx_unlock(adev, flags); -+end_ok: -+ -+ acx_sem_unlock(adev); -+#endif /* ACX_DEBUG */ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100mem_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ u16 gpio_old; -+ -+ if (!IS_ACX100(adev)) { -+ /* WARNING!!! -+ * Removing this check *might* damage -+ * hardware, since we're tweaking GPIOs here after all!!! -+ * You've been warned... -+ * WARNING!!! */ -+ printk("acx: sorry, setting bias level for non-acx100 " -+ "is not supported yet\n"); -+ return OK; -+ } -+ -+ if (*extra > 7) { -+ printk("acx: invalid bias parameter, range is 0-7\n"); -+ return -EINVAL; -+ } -+ -+ acx_sem_lock(adev); -+ -+ /* Need to lock accesses to [IO_ACX_GPIO_OUT]: -+ * IRQ handler uses it to update LED */ -+ acx_lock(adev, flags); -+ gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT); -+ write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8)); -+ acx_unlock(adev, flags); -+ -+ log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old); -+ printk("%s: PHY power amplifier bias: old:%d, new:%d\n", -+ ndev->name, -+ (gpio_old & 0x0700) >> 8, (unsigned char)*extra); -+ -+ acx_sem_unlock(adev); -+ -+ return OK; -+} -+ -+/*************************************************************** -+** acxmem_l_alloc_tx -+** Actually returns a txdesc_t* ptr -+** -+** FIXME: in case of fragments, should allocate multiple descrs -+** after figuring out how many we need and whether we still have -+** sufficiently many. -+*/ -+tx_t* -+acxmem_l_alloc_tx(acx_device_t *adev) -+{ -+ struct txdesc *txdesc; -+ unsigned head; -+ u8 ctl8; -+ static int txattempts = 0; -+ -+ FN_ENTER; -+ -+ if (unlikely(!adev->tx_free)) { -+ printk("acx: BUG: no free txdesc left\n"); -+ /* -+ * Probably the ACX ignored a transmit attempt and now there's a packet -+ * sitting in the queue we think should be transmitting but the ACX doesn't -+ * know about. -+ * On the first pass, send the ACX a TxProc interrupt to try moving -+ * things along, and if that doesn't work (ie, we get called again) completely -+ * flush the transmit queue. -+ */ -+ if (txattempts < 10) { -+ txattempts++; -+ printk ("acx: trying to wake up ACX\n"); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); -+ write_flush(adev); } -+ else { -+ txattempts = 0; -+ printk ("acx: flushing transmit queue.\n"); -+ acxmem_l_clean_txdesc_emergency (adev); -+ } -+ txdesc = NULL; -+ goto end; -+ } -+ -+ /* -+ * Make a quick check to see if there is transmit buffer space on -+ * the ACX. This can't guarantee there is enough space for the packet -+ * since we don't yet know how big it is, but it will prevent at least some -+ * annoyances. -+ */ -+ if (!adev->acx_txbuf_blocks_free) { -+ txdesc = NULL; -+ goto end; -+ } -+ -+ head = adev->tx_head; -+ /* -+ * txdesc points to ACX memory -+ */ -+ txdesc = get_txdesc(adev, head); -+ ctl8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ -+ /* -+ * If we don't own the buffer (HOSTOWN) it is certainly not free; however, -+ * we may have previously thought we had enough memory to send -+ * a packet, allocated the buffer then gave up when we found not enough -+ * transmit buffer space on the ACX. In that case, HOSTOWN and -+ * ACXDONE will both be set. -+ */ -+ if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_HOSTOWN))) { -+ /* whoops, descr at current index is not free, so probably -+ * ring buffer already full */ -+ printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find " -+ "free txdesc\n", head, ctl8); -+ txdesc = NULL; -+ goto end; -+ } -+ -+ /* Needed in case txdesc won't be eventually submitted for tx */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_ACXDONE_HOSTOWN); -+ -+ adev->tx_free--; -+ log(L_BUFT, "tx: got desc %u, %u remain\n", -+ head, adev->tx_free); -+ /* Keep a few free descs between head and tail of tx ring. -+ ** It is not absolutely needed, just feels safer */ -+ if (adev->tx_free < TX_STOP_QUEUE) { -+ log(L_BUF, "stop queue (%u tx desc left)\n", -+ adev->tx_free); -+ acx_stop_queue(adev->ndev, NULL); -+ } -+ -+ /* returning current descriptor, so advance to next free one */ -+ adev->tx_head = (head + 1) % TX_CNT; -+end: -+ FN_EXIT0; -+ -+ return (tx_t*)txdesc; -+} -+ -+ -+/*************************************************************** -+** acxmem_l_dealloc_tx -+** Clears out a previously allocatedvoid acxmem_l_dealloc_tx(tx_t *tx_opaque); -+ transmit descriptor. The ACX -+** can get confused if we skip transmit descriptors in the queue, -+** so when we don't need a descriptor return it to its original -+** state and move the queue head pointer back. -+** -+*/ -+void -+acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque) -+{ -+ /* -+ * txdesc is the address of the descriptor on the ACX. -+ */ -+ txdesc_t *txdesc = (txdesc_t*)tx_opaque; -+ txdesc_t tmptxdesc; -+ int index; -+ -+ memset (&tmptxdesc, 0, sizeof(tmptxdesc)); -+ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; -+ tmptxdesc.u.r1.rate = 0x0a; -+ -+ /* -+ * Clear out all of the transmit descriptor except for the next pointer -+ */ -+ copy_to_slavemem (adev, (u32) &(txdesc->HostMemPtr), -+ (u8 *) &(tmptxdesc.HostMemPtr), -+ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc)); -+ -+ /* -+ * This is only called immediately after we've allocated, so we should -+ * be able to set the head back to this descriptor. -+ */ -+ index = ((u8*) txdesc - (u8*)adev->txdesc_start) / adev->txdesc_size; -+ printk ("acx_dealloc: moving head from %d to %d\n", adev->tx_head, index); -+ adev->tx_head = index; -+} -+ -+ -+/*********************************************************************** -+*/ -+void* -+acxmem_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) -+{ -+ return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_tx_data -+** -+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). -+** Can be called from acx_i_start_xmit (data frames from net core). -+** -+** FIXME: in case of fragments, should loop over the number of -+** pre-allocated tx descrs, properly setting up transfer data and -+** CTL_xxx flags according to fragment number. -+*/ -+void -+acxmem_update_queue_indicator (acx_device_t *adev, int txqueue) -+{ -+#ifdef USING_MORE_THAN_ONE_TRANSMIT_QUEUE -+ u32 indicator; -+ unsigned long flags; -+ int count; -+ -+ /* -+ * Can't handle an interrupt while we're fiddling with the ACX's lock, -+ * according to TI. The ACX is supposed to hold fw_lock for at most -+ * 500ns. -+ */ -+ local_irq_save (flags); -+ -+ /* -+ * Wait for ACX to release the lock (at most 500ns). -+ */ -+ count = 0; -+ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) -+ && (count++ < 50)) { -+ ndelay (10); -+ } -+ if (count < 50) { -+ -+ /* -+ * Take out the host lock - anything non-zero will work, so don't worry about -+ * be/le -+ */ -+ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 1); -+ -+ /* -+ * Avoid a race condition -+ */ -+ count = 0; -+ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) -+ && (count++ < 50)) { -+ ndelay (10); -+ } -+ -+ if (count < 50) { -+ /* -+ * Mark the queue active -+ */ -+ indicator = read_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator)); -+ indicator |= cpu_to_le32 (1 << txqueue); -+ write_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator), indicator); -+ } -+ -+ /* -+ * Release the host lock -+ */ -+ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 0); -+ -+ } -+ -+ /* -+ * Restore interrupts -+ */ -+ local_irq_restore (flags); -+#endif -+} -+ -+void -+acxmem_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len) -+{ -+ /* -+ * txdesc is the address on the ACX -+ */ -+ txdesc_t *txdesc = (txdesc_t*)tx_opaque; -+ txhostdesc_t *hostdesc1, *hostdesc2; -+ client_t *clt; -+ u16 rate_cur; -+ u8 Ctl_8, Ctl2_8; -+ u32 addr; -+ -+ FN_ENTER; -+ /* fw doesn't tx such packets anyhow */ -+ if (unlikely(len < WLAN_HDR_A3_LEN)) -+ goto end; -+ -+ hostdesc1 = get_txhostdesc(adev, txdesc); -+ /* modify flag status in separate variable to be able to write it back -+ * in one big swoop later (also in order to have less device memory -+ * accesses) */ -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */ -+ -+ hostdesc2 = hostdesc1 + 1; -+ -+ /* DON'T simply set Ctl field to 0 here globally, -+ * it needs to maintain a consistent flag status (those are state flags!!), -+ * otherwise it may lead to severe disruption. Only set or reset particular -+ * flags at the exact moment this is needed... */ -+ -+ /* let chip do RTS/CTS handshaking before sending -+ * in case packet size exceeds threshold */ -+ if (len > adev->rts_threshold) -+ SET_BIT(Ctl2_8, DESC_CTL2_RTS); -+ else -+ CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS); -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1); -+ break; -+ case ACX_MODE_2_STA: -+ clt = adev->ap_client; -+ break; -+#if 0 -+/* testing was done on acx111: */ -+ case ACX_MODE_MONITOR: -+ SET_BIT(Ctl2_8, 0 -+/* sends CTS to self before packet */ -+ + DESC_CTL2_SEQ /* don't increase sequence field */ -+/* not working (looks like good fcs is still added) */ -+ + DESC_CTL2_FCS /* don't add the FCS */ -+/* not tested */ -+ + DESC_CTL2_MORE_FRAG -+/* not tested */ -+ + DESC_CTL2_RETRY /* don't increase retry field */ -+/* not tested */ -+ + DESC_CTL2_POWER /* don't increase power mgmt. field */ -+/* no effect */ -+ + DESC_CTL2_WEP /* encrypt this frame */ -+/* not tested */ -+ + DESC_CTL2_DUR /* don't increase duration field */ -+ ); -+ /* fallthrough */ -+#endif -+ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ -+ clt = NULL; -+ break; -+ } -+ -+ rate_cur = clt ? clt->rate_cur : adev->rate_bcast; -+ if (unlikely(!rate_cur)) { -+ printk("acx: driver bug! bad ratemask\n"); -+ goto end; -+ } -+ -+ /* used in tx cleanup routine for auto rate and accounting: */ -+ put_txcr(adev, txdesc, clt, rate_cur); -+ -+ write_slavemem16 (adev, (u32) &(txdesc->total_length), cpu_to_le16(len)); -+ hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN); -+ if (IS_ACX111(adev)) { -+ /* note that if !txdesc->do_auto, txrate->cur -+ ** has only one nonzero bit */ -+ txdesc->u.r2.rate111 = cpu_to_le16( -+ rate_cur -+ /* WARNING: I was never able to make it work with prism54 AP. -+ ** It was falling down to 1Mbit where shortpre is not applicable, -+ ** and not working at all at "5,11 basic rates only" setting. -+ ** I even didn't see tx packets in radio packet capture. -+ ** Disabled for now --vda */ -+ /*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */ -+ ); -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ /* should add this to rate111 above as necessary */ -+ | (clt->pbcc511 ? RATE111_PBCC511 : 0) -+#endif -+ hostdesc1->length = cpu_to_le16(len); -+ } else { /* ACX100 */ -+ u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100; -+ write_slavemem8 (adev, (u32) &(txdesc->u.r1.rate), rate_100); -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ if (clt->pbcc511) { -+ if (n == RATE100_5 || n == RATE100_11) -+ n |= RATE100_PBCC511; -+ } -+ -+ if (clt->shortpre && (clt->cur != RATE111_1)) -+ SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */ -+#endif -+ /* set autodma and reclaim and 1st mpdu */ -+ SET_BIT(Ctl_8, DESC_CTL_FIRSTFRAG); -+ -+#if ACX_FRAGMENTATION -+ /* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */ -+#endif -+ hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN); -+ -+ /* -+ * Since we're not using autodma copy the packet data to the acx now. -+ * Even host descriptors point to the packet header, and the odd indexed -+ * descriptor following points to the packet data. -+ * -+ * The first step is to find free memory in the ACX transmit buffers. -+ * They don't necessarily map one to one with the transmit queue entries, -+ * so search through them starting just after the last one used. -+ */ -+ addr = allocate_acx_txbuf_space (adev, len); -+ if (addr) { -+ chaincopy_to_slavemem (adev, addr, hostdesc1->data, len); -+ } -+ else { -+ /* -+ * Bummer. We thought we might have enough room in the transmit -+ * buffers to send this packet, but it turns out we don't. alloc_tx -+ * has already marked this transmit descriptor as HOSTOWN and ACXDONE, -+ * which means the ACX will hang when it gets to this descriptor unless -+ * we do something about it. Having a bubble in the transmit queue just -+ * doesn't seem to work, so we have to reset this transmit queue entry's -+ * state to its original value and back up our head pointer to point -+ * back to this entry. -+ */ -+ hostdesc1->length = 0; -+ hostdesc2->length = 0; -+ write_slavemem16 (adev, (u32) &(txdesc->total_length), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG); -+ adev->tx_head = ((u8*) txdesc - (u8*) adev->txdesc_start) / adev->txdesc_size; -+ goto end; -+ } -+ /* -+ * Tell the ACX where the packet is. -+ */ -+ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), addr); -+ -+ } -+ /* don't need to clean ack/rts statistics here, already -+ * done on descr cleanup */ -+ -+ /* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors -+ * are now owned by the acx100; do this as LAST operation */ -+ CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN); -+ /* flush writes before we release hostdesc to the adapter here */ -+ //wmb(); -+ -+ /* write back modified flags */ -+ /* -+ * At this point Ctl_8 should just be FIRSTFRAG -+ */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl2_8),Ctl2_8); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), Ctl_8); -+ /* unused: txdesc->tx_time = cpu_to_le32(jiffies); */ -+ -+ /* -+ * Update the queue indicator to say there's data on the first queue. -+ */ -+ acxmem_update_queue_indicator (adev, 0); -+ -+ /* flush writes before we tell the adapter that it's its turn now */ -+ mmiowb(); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); -+ write_flush(adev); -+ -+ /* log the packet content AFTER sending it, -+ * in order to not delay sending any further than absolutely needed -+ * Do separate logs for acx100/111 to have human-readable rates */ -+ if (unlikely(acx_debug & (L_XFER|L_DATA))) { -+ u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc; -+ if (IS_ACX111(adev)) -+ printk("tx: pkt (%s): len %d " -+ "rate %04X%s status %u\n", -+ acx_get_packet_type_string(le16_to_cpu(fc)), len, -+ le16_to_cpu(txdesc->u.r2.rate111), -+ (le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "", -+ adev->status); -+ else -+ printk("tx: pkt (%s): len %d rate %03u%s status %u\n", -+ acx_get_packet_type_string(fc), len, -+ read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)), -+ (Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "", -+ adev->status); -+ -+ if (acx_debug & L_DATA) { -+ printk("tx: 802.11 [%d]: ", len); -+ acx_dump_bytes(hostdesc1->data, len); -+ } -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_clean_txdesc -+** -+** This function resets the txdescs' status when the ACX100 -+** signals the TX done IRQ (txdescs have been processed), starting with -+** the pool index of the descriptor which we would use next, -+** in order to make sure that we can be as fast as possible -+** in filling new txdescs. -+** Everytime we get called we know where the next packet to be cleaned is. -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_txbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_txbuffer(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ u8 Ctl_8; -+ -+ /* no FN_ENTER here, we don't want that */ -+ /* no locks here, since it's entirely non-critical code */ -+ txdesc = adev->txdesc_start; -+ if (unlikely(!txdesc)) return; -+ printk("tx: desc->Ctl8's:"); -+ for (i = 0; i < TX_CNT; i++) { -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ printk(" %02X", Ctl_8); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ printk("\n"); -+} -+#endif -+ -+ -+static void -+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger) -+{ -+ const char *err = "unknown error"; -+ -+ /* hmm, should we handle this as a mask -+ * of *several* bits? -+ * For now I think only caring about -+ * individual bits is ok... */ -+ switch (error) { -+ case 0x01: -+ err = "no Tx due to error in other fragment"; -+ adev->wstats.discard.fragment++; -+ break; -+ case 0x02: -+ err = "Tx aborted"; -+ adev->stats.tx_aborted_errors++; -+ break; -+ case 0x04: -+ err = "Tx desc wrong parameters"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x08: -+ err = "WEP key not found"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x10: -+ err = "MSDU lifetime timeout? - try changing " -+ "'iwconfig retry lifetime XXX'"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x20: -+ err = "excessive Tx retries due to either distance " -+ "too high or unable to Tx or Tx frame error - " -+ "try changing 'iwconfig txpower XXX' or " -+ "'sens'itivity or 'retry'"; -+ adev->wstats.discard.retries++; -+ /* Tx error 0x20 also seems to occur on -+ * overheating, so I'm not sure whether we -+ * actually want to do aggressive radio recalibration, -+ * since people maybe won't notice then that their hardware -+ * is slowly getting cooked... -+ * Or is it still a safe long distance from utter -+ * radio non-functionality despite many radio recalibs -+ * to final destructive overheating of the hardware? -+ * In this case we really should do recalib here... -+ * I guess the only way to find out is to do a -+ * potentially fatal self-experiment :-\ -+ * Or maybe only recalib in case we're using Tx -+ * rate auto (on errors switching to lower speed -+ * --> less heat?) or 802.11 power save mode? -+ * -+ * ok, just do it. */ -+ if (++adev->retry_errors_msg_ratelimit % 4 == 0) { -+ if (adev->retry_errors_msg_ratelimit <= 20) { -+ printk("%s: several excessive Tx " -+ "retry errors occurred, attempting " -+ "to recalibrate radio. Radio " -+ "drift might be caused by increasing " -+ "card temperature, please check the card " -+ "before it's too late!\n", -+ adev->ndev->name); -+ if (adev->retry_errors_msg_ratelimit == 20) -+ printk("disabling above message\n"); -+ } -+ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ } -+ break; -+ case 0x40: -+ err = "Tx buffer overflow"; -+ adev->stats.tx_fifo_errors++; -+ break; -+ case 0x80: -+ err = "DMA error"; -+ adev->wstats.discard.misc++; -+ break; -+ } -+ adev->stats.tx_errors++; -+ if (adev->stats.tx_errors <= 20) -+ printk("%s: tx error 0x%02X, buf %02u! (%s)\n", -+ adev->ndev->name, error, finger, err); -+ else -+ printk("%s: tx error 0x%02X, buf %02u!\n", -+ adev->ndev->name, error, finger); -+} -+ -+ -+unsigned int -+acxmem_l_clean_txdesc(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ unsigned finger; -+ int num_cleaned; -+ u16 r111; -+ u8 error, ack_failures, rts_failures, rts_ok, r100, Ctl_8; -+ u32 acxmem; -+ txdesc_t tmptxdesc; -+ -+ FN_ENTER; -+ -+ /* -+ * Set up a template descriptor for re-initialization. The only -+ * things that get set are Ctl_8 and the rate, and the rate defaults -+ * to 1Mbps. -+ */ -+ memset (&tmptxdesc, 0, sizeof (tmptxdesc)); -+ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; -+ tmptxdesc.u.r1.rate = 0x0a; -+ -+ if (unlikely(acx_debug & L_DEBUG)) -+ log_txbuffer(adev); -+ -+ log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail); -+ -+ /* We know first descr which is not free yet. We advance it as far -+ ** as we see correct bits set in following descs (if next desc -+ ** is NOT free, we shouldn't advance at all). We know that in -+ ** front of tx_tail may be "holes" with isolated free descs. -+ ** We will catch up when all intermediate descs will be freed also */ -+ -+ finger = adev->tx_tail; -+ num_cleaned = 0; -+ while (likely(finger != adev->tx_head)) { -+ txdesc = get_txdesc(adev, finger); -+ -+ /* If we allocated txdesc on tx path but then decided -+ ** to NOT use it, then it will be left as a free "bubble" -+ ** in the "allocated for tx" part of the ring. -+ ** We may meet it on the next ring pass here. */ -+ -+ /* stop if not marked as "tx finished" and "host owned" */ -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ if ((Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN) -+ != DESC_CTL_ACXDONE_HOSTOWN) { -+ if (unlikely(!num_cleaned)) { /* maybe remove completely */ -+ log(L_BUFT, "clean_txdesc: tail isn't free. " -+ "tail:%d head:%d\n", -+ adev->tx_tail, adev->tx_head); -+ } -+ break; -+ } -+ -+ /* remember desc values... */ -+ error = read_slavemem8 (adev, (u32) &(txdesc->error)); -+ ack_failures = read_slavemem8 (adev, (u32) &(txdesc->ack_failures)); -+ rts_failures = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures)); -+ rts_ok = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok)); -+ r100 = read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)); -+ r111 = le16_to_cpu(read_slavemem16 (adev, (u32) &(txdesc->u.r2.rate111))); -+ -+ /* need to check for certain error conditions before we -+ * clean the descriptor: we still need valid descr data here */ -+ if (unlikely(0x30 & error)) { -+ /* only send IWEVTXDROP in case of retry or lifetime exceeded; -+ * all other errors mean we screwed up locally */ -+ union iwreq_data wrqu; -+ wlan_hdr_t *hdr; -+ txhostdesc_t *hostdesc; -+ -+ hostdesc = get_txhostdesc(adev, txdesc); -+ hdr = (wlan_hdr_t *)hostdesc->data; -+ MAC_COPY(wrqu.addr.sa_data, hdr->a1); -+ wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL); -+ } -+ -+ /* -+ * Free up the transmit data buffers -+ */ -+ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (acxmem) { -+ reclaim_acx_txbuf_space (adev, acxmem); -+ } -+ -+ /* ...and free the desc by clearing all the fields -+ except the next pointer */ -+ copy_to_slavemem (adev, -+ (u32) &(txdesc->HostMemPtr), -+ (u8 *) &(tmptxdesc.HostMemPtr), -+ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc) -+ ); -+ -+ adev->tx_free++; -+ num_cleaned++; -+ -+ if ((adev->tx_free >= TX_START_QUEUE) -+ && (adev->status == ACX_STATUS_4_ASSOCIATED) -+ && (acx_queue_stopped(adev->ndev)) -+ ) { -+ log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n", -+ adev->tx_free); -+ acx_wake_queue(adev->ndev, NULL); -+ } -+ -+ /* do error checking, rate handling and logging -+ * AFTER having done the work, it's faster */ -+ -+ /* do rate handling */ -+ if (adev->rate_auto) { -+ struct client *clt = get_txc(adev, txdesc); -+ if (clt) { -+ u16 cur = get_txr(adev, txdesc); -+ if (clt->rate_cur == cur) { -+ acx_l_handle_txrate_auto(adev, clt, -+ cur, /* intended rate */ -+ r100, r111, /* actually used rate */ -+ (error & 0x30), /* was there an error? */ -+ TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free); -+ } -+ } -+ } -+ -+ if (unlikely(error)) -+ handle_tx_error(adev, error, finger); -+ -+ if (IS_ACX111(adev)) -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n", -+ finger, ack_failures, rts_failures, rts_ok, r111); -+ else -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n", -+ finger, ack_failures, rts_failures, rts_ok, r100); -+ -+ /* update pointer for descr to be cleaned next */ -+ finger = (finger + 1) % TX_CNT; -+ } -+ -+ /* remember last position */ -+ adev->tx_tail = finger; -+/* end: */ -+ FN_EXIT1(num_cleaned); -+ return num_cleaned; -+} -+ -+/* clean *all* Tx descriptors, and regardless of their previous state. -+ * Used for brute-force reset handling. */ -+void -+acxmem_l_clean_txdesc_emergency(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ u32 acxmem; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc = get_txdesc(adev, i); -+ -+ /* free it */ -+ write_slavemem8 (adev, (u32) &(txdesc->ack_failures), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->error), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN); -+ -+ /* -+ * Clean up the memory allocated on the ACX for this transmit descriptor. -+ */ -+ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (acxmem) { -+ reclaim_acx_txbuf_space (adev, acxmem); -+ } -+ -+ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), 0); -+ } -+ -+ adev->tx_free = TX_CNT; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_create_tx_host_desc_queue -+*/ -+ -+static void* -+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg) -+{ -+ void *ptr; -+ ptr = kmalloc (size, GFP_KERNEL); -+ /* -+ * The ACX can't use the physical address, so we'll have to fake it -+ * later and it might be handy to have the virtual address. -+ */ -+ *phy = (dma_addr_t) NULL; -+ -+ if (ptr) { -+ log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n", -+ msg, (int)size, ptr, (unsigned long long)*phy); -+ memset(ptr, 0, size); -+ return ptr; -+ } -+ printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n", -+ msg, (int)size); -+ return NULL; -+} -+ -+ -+/* -+ * In the generic slave memory access mode, most of the stuff in -+ * the txhostdesc_t is unused. It's only here because the rest of -+ * the ACX driver expects it to be since the PCI version uses indirect -+ * host memory organization with DMA. Since we're not using DMA the -+ * only use we have for the host descriptors is to store the packets -+ * on the way out. -+ */ -+static int -+acxmem_s_create_tx_host_desc_queue(acx_device_t *adev) -+{ -+ txhostdesc_t *hostdesc; -+ u8 *txbuf; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate TX buffer */ -+ adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS; -+ -+ adev->txbuf_start = allocate(adev, adev->txbuf_area_size, -+ &adev->txbuf_startphy, "txbuf_start"); -+ if (!adev->txbuf_start) -+ goto fail; -+ -+ /* allocate the TX host descriptor queue pool */ -+ adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc); -+ -+ adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size, -+ &adev->txhostdesc_startphy, "txhostdesc_start"); -+ if (!adev->txhostdesc_start) -+ goto fail; -+ -+ /* check for proper alignment of TX host descriptor pool */ -+ if ((long) adev->txhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ hostdesc = adev->txhostdesc_start; -+ txbuf = adev->txbuf_start; -+ -+#if 0 -+/* Each tx buffer is accessed by hardware via -+** txdesc -> txhostdesc(s) -> txbuffer(s). -+** We use only one txhostdesc per txdesc, but it looks like -+** acx111 is buggy: it accesses second txhostdesc -+** (via hostdesc.desc_phy_next field) even if -+** txdesc->length == hostdesc->length and thus -+** entire packet was placed into first txhostdesc. -+** Due to this bug acx111 hangs unless second txhostdesc -+** has le16_to_cpu(hostdesc.length) = 3 (or larger) -+** Storing NULL into hostdesc.desc_phy_next -+** doesn't seem to help. -+** -+** Update: although it worked on Xterasys XN-2522g -+** with len=3 trick, WG311v2 is even more bogus, doesn't work. -+** Keeping this code (#ifdef'ed out) for documentational purposes. -+*/ -+ for (i = 0; i < TX_CNT*2; i++) { -+ hostdesc_phy += sizeof(*hostdesc); -+ if (!(i & 1)) { -+ hostdesc->data_phy = cpu2acx(txbuf_phy); -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); -+ /* hostdesc->length = ... */ -+ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); -+ hostdesc->pNext = ptr2acx(NULL); -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ hostdesc->data = txbuf; -+ -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS; -+ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS; -+ } else { -+ /* hostdesc->data_phy = ... */ -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ /* hostdesc->Ctl_16 = ... */ -+ hostdesc->length = cpu_to_le16(3); /* bug workaround */ -+ /* hostdesc->desc_phy_next = ... */ -+ /* hostdesc->pNext = ... */ -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ /* hostdesc->data = ... */ -+ } -+ hostdesc++; -+ } -+#endif -+/* We initialize two hostdescs so that they point to adjacent -+** memory areas. Thus txbuf is really just a contiguous memory area */ -+ for (i = 0; i < TX_CNT*2; i++) { -+ /* ->data is a non-hardware field: */ -+ hostdesc->data = txbuf; -+ -+ if (!(i & 1)) { -+ txbuf += WLAN_HDR_A3_LEN; -+ } else { -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; -+ } -+ hostdesc++; -+ } -+ hostdesc--; -+ -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_tx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxmem_s_create_rx_host_desc_queue -+*/ -+/* the whole size of a data buffer (header plus data body) -+ * plus 32 bytes safety offset at the end */ -+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32) -+ -+static int -+acxmem_s_create_rx_host_desc_queue(acx_device_t *adev) -+{ -+ rxhostdesc_t *hostdesc; -+ rxbuffer_t *rxbuf; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate the RX host descriptor queue pool */ -+ adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc); -+ -+ adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size, -+ &adev->rxhostdesc_startphy, "rxhostdesc_start"); -+ if (!adev->rxhostdesc_start) -+ goto fail; -+ -+ /* check for proper alignment of RX host descriptor pool */ -+ if ((long) adev->rxhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ /* allocate Rx buffer pool which will be used by the acx -+ * to store the whole content of the received frames in it */ -+ adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE; -+ -+ adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size, -+ &adev->rxbuf_startphy, "rxbuf_start"); -+ if (!adev->rxbuf_start) -+ goto fail; -+ -+ rxbuf = adev->rxbuf_start; -+ hostdesc = adev->rxhostdesc_start; -+ -+ /* don't make any popular C programming pointer arithmetic mistakes -+ * here, otherwise I'll kill you... -+ * (and don't dare asking me why I'm warning you about that...) */ -+ for (i = 0; i < RX_CNT; i++) { -+ hostdesc->data = rxbuf; -+ hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE); -+ rxbuf++; -+ hostdesc++; -+ } -+ hostdesc--; -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_rx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxmem_s_create_hostdesc_queues -+*/ -+int -+acxmem_s_create_hostdesc_queues(acx_device_t *adev) -+{ -+ int result; -+ result = acxmem_s_create_tx_host_desc_queue(adev); -+ if (OK != result) return result; -+ result = acxmem_s_create_rx_host_desc_queue(adev); -+ return result; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_tx_desc_queue -+*/ -+static void -+acxmem_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start) -+{ -+ txdesc_t *txdesc; -+ u32 clr; -+ int i; -+ -+ FN_ENTER; -+ -+ if (IS_ACX100(adev)) -+ adev->txdesc_size = sizeof(*txdesc); -+ else -+ /* the acx111 txdesc is 4 bytes larger */ -+ adev->txdesc_size = sizeof(*txdesc) + 4; -+ -+ /* -+ * This refers to an ACX address, not one of ours -+ */ -+ adev->txdesc_start = (txdesc_t *) tx_queue_start; -+ -+ log(L_DEBUG, "adev->txdesc_start=%p\n", -+ adev->txdesc_start); -+ -+ adev->tx_free = TX_CNT; -+ /* done by memset: adev->tx_head = 0; */ -+ /* done by memset: adev->tx_tail = 0; */ -+ txdesc = adev->txdesc_start; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111 has a preinitialized Tx buffer! */ -+ /* loop over whole send pool */ -+ /* FIXME: do we have to do the hostmemptr stuff here?? */ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; -+ /* reserve two (hdr desc and payload desc) */ -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ } else { -+ /* ACX100 Tx buffer needs to be initialized by us */ -+ /* clear whole send pool. sizeof is safe here (we are acx100) */ -+ -+ /* -+ * adev->txdesc_start refers to device memory, so we can't write -+ * directly to it. -+ */ -+ clr = (u32) adev->txdesc_start; -+ while (clr < (u32) adev->txdesc_start + (TX_CNT * sizeof(*txdesc))) { -+ write_slavemem32 (adev, clr, 0); -+ clr += 4; -+ } -+ -+ /* loop over whole send pool */ -+ for (i = 0; i < TX_CNT; i++) { -+ log(L_DEBUG, "configure card tx descriptor: 0x%p, " -+ "size: 0x%X\n", txdesc, adev->txdesc_size); -+ -+ /* initialise ctl */ -+ /* -+ * No auto DMA here -+ */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), -+ (u8) (DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG)); -+ /* done by memset(0): txdesc->Ctl2_8 = 0; */ -+ -+ /* point to next txdesc */ -+ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), -+ (u32) cpu_to_le32 ((u8 *) txdesc + adev->txdesc_size)); -+ -+ /* go to the next one */ -+ /* ++ is safe here (we are acx100) */ -+ txdesc++; -+ } -+ /* go back to the last one */ -+ txdesc--; -+ /* and point to the first making it a ring buffer */ -+ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), -+ (u32) cpu_to_le32 (tx_queue_start)); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_rx_desc_queue -+*/ -+static void -+acxmem_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start) -+{ -+ rxdesc_t *rxdesc; -+ u32 mem_offs; -+ int i; -+ -+ FN_ENTER; -+ -+ /* done by memset: adev->rx_tail = 0; */ -+ -+ /* ACX111 doesn't need any further config: preconfigures itself. -+ * Simply print ring buffer for debugging */ -+ if (IS_ACX111(adev)) { -+ /* rxdesc_start already set here */ -+ -+ adev->rxdesc_start = (rxdesc_t *) rx_queue_start; -+ -+ rxdesc = adev->rxdesc_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc); -+ rxdesc = adev->rxdesc_start = (rxdesc_t *) -+ acx2cpu(rxdesc->pNextDesc); -+ } -+ } else { -+ /* we didn't pre-calculate rxdesc_start in case of ACX100 */ -+ /* rxdesc_start should be right AFTER Tx pool */ -+ adev->rxdesc_start = (rxdesc_t *) -+ ((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t))); -+ /* NB: sizeof(txdesc_t) above is valid because we know -+ ** we are in if (acx100) block. Beware of cut-n-pasting elsewhere! -+ ** acx111's txdesc is larger! */ -+ -+ mem_offs = (u32) adev->rxdesc_start; -+ while (mem_offs < (u32) adev->rxdesc_start + (RX_CNT * sizeof (*rxdesc))) { -+ write_slavemem32 (adev, mem_offs, 0); -+ mem_offs += 4; -+ } -+ -+ /* loop over whole receive pool */ -+ rxdesc = adev->rxdesc_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc); -+ /* point to next rxdesc */ -+ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), -+ (u32) cpu_to_le32 ((u8 *) rxdesc + sizeof(*rxdesc))); -+ /* go to the next one */ -+ rxdesc++; -+ } -+ /* go to the last one */ -+ rxdesc--; -+ -+ /* and point to the first making it a ring buffer */ -+ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), -+ (u32) cpu_to_le32 (rx_queue_start)); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_desc_queues -+*/ -+void -+acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start) -+{ -+ u32 *p; -+ int i; -+ -+ acxmem_create_tx_desc_queue(adev, tx_queue_start); -+ acxmem_create_rx_desc_queue(adev, rx_queue_start); -+ p = (u32 *) adev->acx_queue_indicator; -+ for (i = 0; i < 4; i++) { -+ write_slavemem32 (adev, (u32) p, 0); -+ p++; -+ } -+} -+ -+ -+/*************************************************************** -+** acxmem_s_proc_diag_output -+*/ -+char* -+acxmem_s_proc_diag_output(char *p, acx_device_t *adev) -+{ -+ const char *rtl, *thd, *ttl; -+ txdesc_t *txdesc; -+ u8 Ctl_8; -+ rxdesc_t *rxdesc; -+ int i; -+ u32 tmp; -+ txdesc_t txd; -+ u8 buf[0x200]; -+ int j, k; -+ -+ FN_ENTER; -+ -+#if DUMP_MEM_DURING_DIAG > 0 -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("dump finished"); -+#endif -+ -+ p += sprintf(p, "** Rx buf **\n"); -+ rxdesc = adev->rxdesc_start; -+ if (rxdesc) for (i = 0; i < RX_CNT; i++) { -+ rtl = (i == adev->rx_tail) ? " [tail]" : ""; -+ Ctl_8 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ if (Ctl_8 & DESC_CTL_HOSTOWN) -+ p += sprintf(p, "%02u (%02x) FULL%s\n", i, Ctl_8, rtl); -+ else -+ p += sprintf(p, "%02u (%02x) empty%s\n", i, Ctl_8, rtl); -+ rxdesc++; -+ } -+ p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free, -+ acx_queue_stopped(adev->ndev) ? "STOPPED" : "running"); -+ -+ p += sprintf(p, "** Tx buf %d blocks total, %d available, free list head %04x\n", -+ adev->acx_txbuf_numblocks, adev->acx_txbuf_blocks_free, adev->acx_txbuf_free); -+ txdesc = adev->txdesc_start; -+ if (txdesc) { -+ for (i = 0; i < TX_CNT; i++) { -+ thd = (i == adev->tx_head) ? " [head]" : ""; -+ ttl = (i == adev->tx_tail) ? " [tail]" : ""; -+ copy_from_slavemem (adev, (u8 *) &txd, (u32) txdesc, sizeof (txd)); -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ if (Ctl_8 & DESC_CTL_ACXDONE) -+ p += sprintf(p, "%02u ready to free (%02X)%s%s", i, Ctl_8, thd, ttl); -+ else if (Ctl_8 & DESC_CTL_HOSTOWN) -+ p += sprintf(p, "%02u available (%02X)%s%s", i, Ctl_8, thd, ttl); -+ else -+ p += sprintf(p, "%02u busy (%02X)%s%s", i, Ctl_8, thd, ttl); -+ tmp = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (tmp) { -+ p += sprintf (p, " %04x", tmp); -+ while ((tmp = read_slavemem32 (adev, (u32) tmp)) != 0x02000000) { -+ tmp <<= 5; -+ p += sprintf (p, " %04x", tmp); -+ } -+ } -+ p += sprintf (p, "\n"); -+ p += sprintf (p, " %04x: %04x %04x %04x %04x %04x %04x %04x %04x %04x %04x %02x %02x %02x %02x\n" -+ "%02x %02x %02x %02x %04x\n", -+ (u32) txdesc, -+ txd.pNextDesc.v, txd.HostMemPtr.v, txd.AcxMemPtr.v, txd.tx_time, -+ txd.total_length, txd.Reserved, -+ txd.dummy[0], txd.dummy[1], txd.dummy[2], txd.dummy[3], -+ txd.Ctl_8, txd.Ctl2_8, txd.error, txd.ack_failures, -+ txd.u.rts.rts_failures, txd.u.rts.rts_ok, txd.u.r1.rate, txd.u.r1.queue_ctrl, -+ txd.queue_info -+ ); -+ if (txd.AcxMemPtr.v) { -+ copy_from_slavemem (adev, buf, txd.AcxMemPtr.v, sizeof (buf)); -+ for (j = 0; (j < txd.total_length) && (j<(sizeof(buf)-4)); j+=16) { -+ p += sprintf (p, " "); -+ for (k = 0; (k < 16) && (j+k < txd.total_length); k++) { -+ p += sprintf (p, " %02x", buf[j+k+4]); -+ } -+ p += sprintf (p, "\n"); -+ } -+ } -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ } -+ -+ p += sprintf(p, -+ "\n" -+ "** Generic slave data **\n" -+ "irq_mask 0x%04x irq_status 0x%04x irq on acx 0x%04x\n" -+ "txbuf_start 0x%p, txbuf_area_size %u\n" -+ "txdesc_size %u, txdesc_start 0x%p\n" -+ "txhostdesc_start 0x%p, txhostdesc_area_size %u\n" -+ "txbuf start 0x%04x, txbuf size %d\n" -+ "rxdesc_start 0x%p\n" -+ "rxhostdesc_start 0x%p, rxhostdesc_area_size %u\n" -+ "rxbuf_start 0x%p, rxbuf_area_size %u\n", -+ adev->irq_mask, adev->irq_status, read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES), -+ adev->txbuf_start, adev->txbuf_area_size, -+ adev->txdesc_size, adev->txdesc_start, -+ adev->txhostdesc_start, adev->txhostdesc_area_size, -+ adev->acx_txbuf_start, adev->acx_txbuf_numblocks * adev->memblocksize, -+ adev->rxdesc_start, -+ adev->rxhostdesc_start, adev->rxhostdesc_area_size, -+ adev->rxbuf_start, adev->rxbuf_area_size); -+ FN_EXIT0; -+ return p; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxmem_proc_eeprom_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ int i; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < 0x400; i++) { -+ acxmem_read_eeprom_byte(adev, i, p++); -+ } -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+*/ -+void -+acxmem_set_interrupt_mask(acx_device_t *adev) -+{ -+ if (IS_ACX111(adev)) { -+ adev->irq_mask = (u16) ~(0 -+ | HOST_INT_RX_DATA -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ /* | HOST_INT_RX_COMPLETE */ -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ | HOST_INT_IV_ICV_FAILURE -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ | HOST_INT_OVERFLOW -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ | HOST_INT_FCS_THRESHOLD -+ | HOST_INT_UNKNOWN -+ ); -+ /* Or else acx100 won't signal cmd completion, right? */ -+ adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */ -+ } else { -+ adev->irq_mask = (u16) ~(0 -+ | HOST_INT_RX_DATA -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ /* | HOST_INT_RX_COMPLETE */ -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ /* | HOST_INT_IV_ICV_FAILURE */ -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ /* | HOST_INT_OVERFLOW */ -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ /* | HOST_INT_FCS_THRESHOLD */ -+ /* | HOST_INT_BEACON_MISSED */ -+ ); -+ adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */ -+ } -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm) -+{ -+ struct acx111_ie_tx_level tx_level; -+ -+ /* since it can be assumed that at least the Maxim radio has a -+ * maximum power output of 20dBm and since it also can be -+ * assumed that these values drive the DAC responsible for -+ * setting the linear Tx level, I'd guess that these values -+ * should be the corresponding linear values for a dBm value, -+ * in other words: calculate the values from that formula: -+ * Y [dBm] = 10 * log (X [mW]) -+ * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm) -+ * and you're done... -+ * Hopefully that's ok, but you never know if we're actually -+ * right... (especially since Windows XP doesn't seem to show -+ * actual Tx dBm values :-P) */ -+ -+ /* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the -+ * values are EXACTLY mW!!! Not sure about RFMD and others, -+ * though... */ -+ static const u8 dbm2val_maxim[21] = { -+ 63, 63, 63, 62, -+ 61, 61, 60, 60, -+ 59, 58, 57, 55, -+ 53, 50, 47, 43, -+ 38, 31, 23, 13, -+ 0 -+ }; -+ static const u8 dbm2val_rfmd[21] = { -+ 0, 0, 0, 1, -+ 2, 2, 3, 3, -+ 4, 5, 6, 8, -+ 10, 13, 16, 20, -+ 25, 32, 41, 50, -+ 63 -+ }; -+ const u8 *table; -+ -+ switch (adev->radio_type) { -+ case RADIO_MAXIM_0D: -+ table = &dbm2val_maxim[0]; -+ break; -+ case RADIO_RFMD_11: -+ case RADIO_RALINK_15: -+ table = &dbm2val_rfmd[0]; -+ break; -+ default: -+ printk("%s: unknown/unsupported radio type, " -+ "cannot modify tx power level yet!\n", -+ adev->ndev->name); -+ return NOT_OK; -+ } -+ /* -+ * The hx4700 EEPROM, at least, only supports 1 power setting. The configure -+ * routine matches the PA bias with the gain, so just use its default value. -+ * The values are: 0x2b for the gain and 0x03 for the PA bias. The firmware -+ * writes the gain level to the Tx gain control DAC and the PA bias to the Maxim -+ * radio's PA bias register. The firmware limits itself to 0 - 64 when writing to the -+ * gain control DAC. -+ * -+ * Physically between the ACX and the radio, higher Tx gain control DAC values result -+ * in less power output; 0 volts to the Maxim radio results in the highest output power -+ * level, which I'm assuming matches up with 0 in the Tx Gain DAC register. -+ * -+ * Although there is only the 1 power setting, one of the radio firmware functions adjusts -+ * the transmit power level up and down. That function is called by the ACX FIQ handler -+ * under certain conditions. -+ */ -+ tx_level.level = 1; -+ //return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); -+ -+ printk("%s: changing radio power level to %u dBm (%u)\n", -+ adev->ndev->name, level_dbm, table[level_dbm]); -+ acxmem_s_write_phy_reg(adev, 0x11, table[level_dbm]); -+ -+ return 0; -+} -+ -+void acxmem_e_release(struct device *dev) { -+} -+ -+/*********************************************************************** -+** acx_cs part -+** -+** called by pcmcia card service -+*/ -+ -+/* -+ The event() function is this driver's Card Services event handler. -+ It will be called by Card Services when an appropriate card status -+ event is received. The config() and release() entry points are -+ used to configure or release a socket, in response to card -+ insertion and ejection events. They are invoked from the acx_cs -+ event handler. -+*/ -+ -+static int acx_cs_config(struct pcmcia_device *link); -+static void acx_cs_release(struct pcmcia_device *link); -+ -+/* -+ The attach() and detach() entry points are used to create and destroy -+ "instances" of the driver, where each instance represents everything -+ needed to manage one actual PCMCIA card. -+*/ -+ -+static void acx_cs_detach(struct pcmcia_device *p_dev); -+ -+/* -+ You'll also need to prototype all the functions that will actually -+ be used to talk to your device. See 'pcmem_cs' for a good example -+ of a fully self-sufficient driver; the other drivers rely more or -+ less on other parts of the kernel. -+*/ -+ -+/* -+ A linked list of "instances" of the acxnet device. Each actual -+ PCMCIA card corresponds to one device instance, and is described -+ by one struct pcmcia_device structure (defined in ds.h). -+ -+ You may not want to use a linked list for this -- for example, the -+ memory card driver uses an array of struct pcmcia_device pointers, where minor -+ device numbers are used to derive the corresponding array index. -+*/ -+ -+/* -+ A driver needs to provide a dev_node_t structure for each device -+ on a card. In some cases, there is only one device per card (for -+ example, ethernet cards, modems). In other cases, there may be -+ many actual or logical devices (SCSI adapters, memory cards with -+ multiple partitions). The dev_node_t structures need to be kept -+ in a linked list starting at the 'dev' field of a struct pcmcia_device -+ structure. We allocate them in the card's private data structure, -+ because they generally shouldn't be allocated dynamically. -+ -+ In this case, we also provide a flag to indicate if a device is -+ "stopped" due to a power management event, or card ejection. The -+ device IO routines can use a flag like this to throttle IO to a -+ card that is not ready to accept it. -+*/ -+ -+ -+/*====================================================================== -+ -+ acx_attach() creates an "instance" of the driver, allocating -+ local data structures for one device. The device is registered -+ with Card Services. -+ -+ The dev_link structure is initialized, but we don't actually -+ configure the card at this point -- we wait until we receive a -+ card insertion event. -+ -+ ======================================================================*/ -+ -+static int acx_cs_probe(struct pcmcia_device *link) -+{ -+ local_info_t *local; -+ struct net_device *ndev; -+ -+ DEBUG(0, "acx_attach()\n"); -+ -+ ndev = alloc_netdev(sizeof(acx_device_t), "wlan%d", dummy_netdev_init); -+ if (!ndev) { -+ printk("acx: no memory for netdevice struct\n"); -+ return -ENOMEM; -+ } -+ -+ /* Interrupt setup */ -+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; -+ link->irq.IRQInfo1 = IRQ_LEVEL_ID; -+ link->irq.Handler = acxmem_i_interrupt; -+ link->irq.Instance = ndev; -+ -+ /* -+ General socket configuration defaults can go here. In this -+ client, we assume very little, and rely on the CIS for almost -+ everything. In most clients, many details (i.e., number, sizes, -+ and attributes of IO windows) are fixed by the nature of the -+ device, and can be hard-wired here. -+ */ -+ link->conf.Attributes = CONF_ENABLE_IRQ; -+ link->conf.IntType = INT_MEMORY_AND_IO; -+ link->conf.Present = PRESENT_OPTION | PRESENT_COPY; -+ -+ /* Allocate space for private device-specific data */ -+ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); -+ if (!local) { -+ printk(KERN_ERR "acx_cs: no memory for new device\n"); -+ return -ENOMEM; -+ } -+ local->ndev = ndev; -+ -+ link->priv = local; -+ -+ return acx_cs_config(link); -+} /* acx_attach */ -+ -+/*====================================================================== -+ -+ This deletes a driver "instance". The device is de-registered -+ with Card Services. If it has been released, all local data -+ structures are freed. Otherwise, the structures will be freed -+ when the device is released. -+ -+ ======================================================================*/ -+ -+static void acx_cs_detach(struct pcmcia_device *link) -+{ -+ DEBUG(0, "acx_detach(0x%p)\n", link); -+ -+ -+ if ( ((local_info_t*)link->priv)->ndev ) { -+ acxmem_e_close( ((local_info_t*)link->priv)->ndev ); -+ } -+ -+ acx_cs_release(link); -+ -+ ((local_info_t*)link->priv)->ndev = NULL; -+ -+ kfree(link->priv); -+} /* acx_detach */ -+ -+/*====================================================================== -+ -+ acx_config() is scheduled to run after a CARD_INSERTION event -+ is received, to configure the PCMCIA socket, and to make the -+ device available to the system. -+ -+ ======================================================================*/ -+ -+#define CS_CHECK(fn, ret) \ -+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) -+ -+static int acx_cs_config(struct pcmcia_device *link) -+{ -+ tuple_t tuple; -+ cisparse_t parse; -+ local_info_t *local = link->priv; -+ int last_fn, last_ret; -+ u_char buf[64]; -+ win_req_t req; -+ memreq_t map; -+// int i; -+// acx_device_t *adev; -+ -+// adev = (acx_device_t *)link->priv; -+ -+ DEBUG(0, "acx_cs_config(0x%p)\n", link); -+ -+ /* -+ In this loop, we scan the CIS for configuration table entries, -+ each of which describes a valid card configuration, including -+ voltage, IO window, memory window, and interrupt settings. -+ -+ We make no assumptions about the card to be configured: we use -+ just the information available in the CIS. In an ideal world, -+ this would work for any PCMCIA card, but it requires a complete -+ and accurate CIS. In practice, a driver usually "knows" most of -+ these things without consulting the CIS, and most client drivers -+ will only use the CIS to fill in implementation-defined details. -+ */ -+ tuple.Attributes = 0; -+ tuple.TupleData = (cisdata_t *)buf; -+ tuple.TupleDataMax = sizeof(buf); -+ tuple.TupleOffset = 0; -+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; -+ -+ /* don't trust the CIS on this; Linksys got it wrong */ -+ //link->conf.Present = 0x63; -+ -+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); -+ while (1) { -+ cistpl_cftable_entry_t dflt = { 0 }; -+ cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); -+ if (pcmcia_get_tuple_data(link, &tuple) != 0 || -+ pcmcia_parse_tuple(link, &tuple, &parse) != 0) -+ goto next_entry; -+ -+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; -+ if (cfg->index == 0) goto next_entry; -+ link->conf.ConfigIndex = cfg->index; -+ -+ /* Does this card need audio output? */ -+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) { -+ link->conf.Attributes |= CONF_ENABLE_SPKR; -+ link->conf.Status = CCSR_AUDIO_ENA; -+ } -+ -+ /* Use power settings for Vcc and Vpp if present */ -+ /* Note that the CIS values need to be rescaled */ -+ if (cfg->vpp1.present & (1<conf.Vpp = -+ cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; -+ else if (dflt.vpp1.present & (1<conf.Vpp = -+ dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; -+ -+ /* Do we need to allocate an interrupt? */ -+ if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) -+ link->conf.Attributes |= CONF_ENABLE_IRQ; -+ if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { -+ cistpl_mem_t *mem = -+ (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; -+// req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_AM|WIN_ENABLE|WIN_USE_WAIT; -+ req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE|WIN_USE_WAIT; -+ req.Base = mem->win[0].host_addr; -+ req.Size = mem->win[0].len; -+ req.Size=0x1000; -+ req.AccessSpeed = 0; -+ if (pcmcia_request_window(&link, &req, &link->win) != 0) -+ goto next_entry; -+ map.Page = 0; map.CardOffset = mem->win[0].card_addr; -+ if (pcmcia_map_mem_page(link->win, &map) != 0) -+ goto next_entry; -+ else -+ printk(KERN_INFO "MEMORY WINDOW FOUND!!!\n"); -+ } -+ /* If we got this far, we're cool! */ -+ break; -+ -+ next_entry: -+ CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); -+ } -+ -+ if (link->conf.Attributes & CONF_ENABLE_IRQ) { -+ printk(KERN_INFO "requesting Irq...\n"); -+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); -+ } -+ -+ /* -+ This actually configures the PCMCIA socket -- setting up -+ the I/O windows and the interrupt mapping, and putting the -+ card and host interface into "Memory and IO" mode. -+ */ -+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); -+ DEBUG(0,"RequestConfiguration OK\n"); -+ -+ -+ memwin.Base=req.Base; -+ memwin.Size=req.Size; -+ -+ acx_init_netdev(local->ndev, &link->dev, memwin.Base, memwin.Size, link->irq.AssignedIRQ); -+ -+#if 1 -+ /* -+ At this point, the dev_node_t structure(s) need to be -+ initialized and arranged in a linked list at link->dev_node. -+ */ -+ strcpy(local->node.dev_name, local->ndev->name ); -+ local->node.major = local->node.minor = 0; -+ link->dev_node = &local->node; -+ -+ /* Finally, report what we've done */ -+ printk(KERN_INFO "%s: index 0x%02x: ", -+ local->ndev->name, link->conf.ConfigIndex); -+#endif -+ if (link->conf.Attributes & CONF_ENABLE_IRQ) -+ printk("irq %d", link->irq.AssignedIRQ); -+ if (link->io.NumPorts1) -+ printk(", io 0x%04x-0x%04x", link->io.BasePort1, -+ link->io.BasePort1+link->io.NumPorts1-1); -+ if (link->io.NumPorts2) -+ printk(" & 0x%04x-0x%04x", link->io.BasePort2, -+ link->io.BasePort2+link->io.NumPorts2-1); -+ if (link->win) -+ printk(", mem 0x%06lx-0x%06lx\n", req.Base, -+ req.Base+req.Size-1); -+ return 0; -+ -+ cs_failed: -+ cs_error(link, last_fn, last_ret); -+ acx_cs_release(link); -+ return -ENODEV; -+} /* acx_config */ -+ -+/*====================================================================== -+ -+ After a card is removed, acx_release() will unregister the -+ device, and release the PCMCIA configuration. If the device is -+ still open, this will be postponed until it is closed. -+ -+ ======================================================================*/ -+ -+static void acx_cs_release(struct pcmcia_device *link) -+{ -+ DEBUG(0, "acx_release(0x%p)\n", link); -+ acxmem_e_remove(link); -+ pcmcia_disable_device(link); -+} -+ -+static int acx_cs_suspend(struct pcmcia_device *link) -+{ -+ local_info_t *local = link->priv; -+ -+ pm_message_t state; -+ acxmem_e_suspend ( local->ndev, state); -+ /* Already done in suspend -+ * netif_device_detach(local->ndev); */ -+ -+ return 0; -+} -+ -+static int acx_cs_resume(struct pcmcia_device *link) -+{ -+ local_info_t *local = link->priv; -+ -+ FN_ENTER; -+ resume_ndev = local->ndev; -+ -+ schedule_work( &fw_resume_work ); -+ -+ /* Already done in suspend -+ if (link->open) { -+ // do we need reset for ACX, if so what function nane is ? -+ //reset_acx_card(local->eth_dev); -+ netif_device_attach(local->ndev); -+ } */ -+ -+ FN_EXIT0; -+ return 0; -+} -+ -+static struct pcmcia_device_id acx_ids[] = { -+ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x8402), -+ PCMCIA_DEVICE_MANF_CARD(0x0250, 0xb001), -+ PCMCIA_DEVICE_NULL, -+}; -+MODULE_DEVICE_TABLE(pcmcia, acx_ids); -+ -+static struct pcmcia_driver acx_driver = { -+ .owner = THIS_MODULE, -+ .drv = { -+ .name = "acx_cs", -+ }, -+ .probe = acx_cs_probe, -+ .remove = acx_cs_detach, -+ .id_table = acx_ids, -+ .suspend = acx_cs_suspend, -+ .resume = acx_cs_resume, -+}; -+ -+int acx_cs_init(void) -+{ -+ /* return success if at least one succeeded */ -+ DEBUG(0, "acxcs_init()\n"); -+ return pcmcia_register_driver(&acx_driver); -+} -+ -+void acx_cs_cleanup(void) -+{ -+ pcmcia_unregister_driver(&acx_driver); -+} -+ -+/* -+ This program is free software; you can redistribute it and/or -+ modify it under the terms of the GNU General Public License -+ as published by the Free Software Foundation; either version 2 -+ of the License, or (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ In addition: -+ -+ Redistribution and use in source and binary forms, with or without -+ modification, are permitted provided that the following conditions -+ are met: -+ -+ 1. Redistributions of source code must retain the above copyright -+ notice, this list of conditions and the following disclaimer. -+ 2. Redistributions in binary form must reproduce the above copyright -+ notice, this list of conditions and the following disclaimer in the -+ documentation and/or other materials provided with the distribution. -+ 3. The name of the author may not be used to endorse or promote -+ products derived from this software without specific prior written -+ permission. -+ -+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -+ IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, -+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING -+ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -+ POSSIBILITY OF SUCH DAMAGE. -+*/ -+ -+MODULE_DESCRIPTION( "ACX Cardbus Driver" ); -+MODULE_LICENSE( "GPL" ); -+ -Index: linux-2.6.23/drivers/net/wireless/acx/htcsable_acx.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/htcsable_acx.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,118 @@ -+/* -+ * WLAN (TI TNETW1100B) support in the HTC Sable -+ * -+ * Copyright (c) 2006 SDG Systems, LLC -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * 28-March-2006 Todd Blumer -+ */ -+ -+ -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx_hw.h" -+ -+#define WLAN_BASE PXA_CS2_PHYS -+ -+/* -+off: b15 c8 d3 -+on: d3 c8 b5 b5- -+*/ -+ -+#define GPIO_NR_HTCSABLE_ACX111 111 -+ -+static int -+htcsable_wlan_stop( void ); -+ -+static int -+htcsable_wlan_start( void ) -+{ -+ printk( "htcsable_wlan_start\n" ); -+ -+ /*asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<" ); -+MODULE_DESCRIPTION( "WLAN driver for HTC Sable" ); -+MODULE_LICENSE( "GPL" ); -+ -Index: linux-2.6.23/drivers/net/wireless/acx/htcuniversal_acx.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/htcuniversal_acx.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,108 @@ -+/* -+ * WLAN (TI TNETW1100B) support in the HTC Universal -+ * -+ * Copyright (c) 2006 SDG Systems, LLC -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * 28-March-2006 Todd Blumer -+ */ -+ -+ -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx_hw.h" -+ -+#define WLAN_BASE PXA_CS2_PHYS -+ -+ -+static int -+htcuniversal_wlan_start( void ) -+{ -+ htcuniversal_egpio_enable(1<" ); -+MODULE_DESCRIPTION( "WLAN driver for HTC Universal" ); -+MODULE_LICENSE( "GPL" ); -+ -Index: linux-2.6.23/drivers/net/wireless/acx/hx4700_acx.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/hx4700_acx.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,108 @@ -+/* -+ * WLAN (TI TNETW1100B) support in the hx470x. -+ * -+ * Copyright (c) 2006 SDG Systems, LLC -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * 28-March-2006 Todd Blumer -+ */ -+ -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "acx_hw.h" -+ -+#define WLAN_OFFSET 0x1000000 -+#define WLAN_BASE (PXA_CS5_PHYS+WLAN_OFFSET) -+ -+ -+static int -+hx4700_wlan_start( void ) -+{ -+ SET_HX4700_GPIO( WLAN_RESET_N, 0 ); -+ mdelay(5); -+ hx4700_egpio_enable( EGPIO0_VCC_3V3_EN ); -+ mdelay(100); -+ hx4700_egpio_enable( EGPIO7_VCC_3V3_WL_EN ); -+ mdelay(150); -+ hx4700_egpio_enable( EGPIO1_WL_VREG_EN | EGPIO2_VCC_2V1_WL_EN | -+ EGPIO6_WL1V8_EN ); -+ mdelay(10); -+ SET_HX4700_GPIO( WLAN_RESET_N, 1 ); -+ mdelay(50); -+ led_trigger_event_shared(hx4700_radio_trig, LED_FULL); -+ return 0; -+} -+ -+static int -+hx4700_wlan_stop( void ) -+{ -+ hx4700_egpio_disable( EGPIO0_VCC_3V3_EN | EGPIO1_WL_VREG_EN | -+ EGPIO7_VCC_3V3_WL_EN | EGPIO2_VCC_2V1_WL_EN | -+ EGPIO6_WL1V8_EN ); -+ SET_HX4700_GPIO( WLAN_RESET_N, 0 ); -+ led_trigger_event_shared(hx4700_radio_trig, LED_OFF); -+ return 0; -+} -+ -+static struct resource acx_resources[] = { -+ [0] = { -+ .start = WLAN_BASE, -+ .end = WLAN_BASE + 0x20, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = HX4700_IRQ(WLAN_IRQ_N), -+ .end = HX4700_IRQ(WLAN_IRQ_N), -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct acx_hardware_data acx_data = { -+ .start_hw = hx4700_wlan_start, -+ .stop_hw = hx4700_wlan_stop, -+}; -+ -+static struct platform_device acx_device = { -+ .name = "acx-mem", -+ .dev = { -+ .platform_data = &acx_data, -+ }, -+ .num_resources = ARRAY_SIZE( acx_resources ), -+ .resource = acx_resources, -+}; -+ -+static int __init -+hx4700_wlan_init( void ) -+{ -+ printk( "hx4700_wlan_init: acx-mem platform_device_register\n" ); -+ return platform_device_register( &acx_device ); -+} -+ -+ -+static void __exit -+hx4700_wlan_exit( void ) -+{ -+ platform_device_unregister( &acx_device ); -+} -+ -+module_init( hx4700_wlan_init ); -+module_exit( hx4700_wlan_exit ); -+ -+MODULE_AUTHOR( "Todd Blumer " ); -+MODULE_DESCRIPTION( "WLAN driver for iPAQ hx4700" ); -+MODULE_LICENSE( "GPL" ); -+ -Index: linux-2.6.23/drivers/net/wireless/acx/ioctl.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/ioctl.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,2748 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+#include -+#include -+#include -+/* #include */ /* required for 2.4.x kernels; verify_write() */ -+#include -+#include -+#include -+ -+#include "acx.h" -+ -+ -+/*********************************************************************** -+*/ -+ -+/* channel frequencies -+ * TODO: Currently, every other 802.11 driver keeps its own copy of this. In -+ * the long run this should be integrated into ieee802_11.h or wireless.h or -+ * whatever IEEE802.11x framework evolves */ -+static const u16 acx_channel_freq[] = { -+ 2412, 2417, 2422, 2427, 2432, 2437, 2442, -+ 2447, 2452, 2457, 2462, 2467, 2472, 2484, -+}; -+ -+ -+/*********************************************************************** -+** acx_ioctl_commit -+*/ -+static int -+acx_ioctl_commit(struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) -+ acx_s_update_card_settings(adev); -+ acx_sem_unlock(adev); -+ -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_name( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ static const char * const names[] = { "IEEE 802.11b+/g+", "IEEE 802.11b+" }; -+ -+ strcpy(wrqu->name, names[IS_ACX111(adev) ? 0 : 1]); -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_freq -+*/ -+static int -+acx_ioctl_set_freq( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int channel = -1; -+ unsigned int mult = 1; -+ int result; -+ -+ FN_ENTER; -+ -+ if (wrqu->freq.e == 0 && wrqu->freq.m <= 1000) { -+ /* Setting by channel number */ -+ channel = wrqu->freq.m; -+ } else { -+ /* If setting by frequency, convert to a channel */ -+ int i; -+ -+ for (i = 0; i < (6 - wrqu->freq.e); i++) -+ mult *= 10; -+ -+ for (i = 1; i <= 14; i++) -+ if (wrqu->freq.m == acx_channel_freq[i - 1] * mult) -+ channel = i; -+ } -+ -+ if (channel > 14) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ acx_sem_lock(adev); -+ -+ adev->channel = channel; -+ /* hmm, the following code part is strange, but this is how -+ * it was being done before... */ -+ log(L_IOCTL, "Changing to channel %d\n", channel); -+ SET_BIT(adev->set_mask, GETSET_CHANNEL); -+ -+ result = -EINPROGRESS; /* need to call commit handler */ -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static inline int -+acx_ioctl_get_freq( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ wrqu->freq.e = 0; -+ wrqu->freq.m = adev->channel; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_mode -+*/ -+static int -+acx_ioctl_set_mode( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ switch (wrqu->mode) { -+ case IW_MODE_AUTO: -+ adev->mode = ACX_MODE_OFF; -+ break; -+ case IW_MODE_MONITOR: -+ adev->mode = ACX_MODE_MONITOR; -+ break; -+ case IW_MODE_ADHOC: -+ adev->mode = ACX_MODE_0_ADHOC; -+ break; -+ case IW_MODE_INFRA: -+ adev->mode = ACX_MODE_2_STA; -+ break; -+ case IW_MODE_MASTER: -+ printk("acx: master mode (HostAP) is very, very " -+ "experimental! It might work partially, but " -+ "better get prepared for nasty surprises " -+ "at any time\n"); -+ adev->mode = ACX_MODE_3_AP; -+ break; -+ case IW_MODE_REPEAT: -+ case IW_MODE_SECOND: -+ default: -+ result = -EOPNOTSUPP; -+ goto end_unlock; -+ } -+ -+ log(L_ASSOC, "new adev->mode=%d\n", adev->mode); -+ SET_BIT(adev->set_mask, GETSET_MODE); -+ result = -EINPROGRESS; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_mode( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = 0; -+ -+ switch (adev->mode) { -+ case ACX_MODE_OFF: -+ wrqu->mode = IW_MODE_AUTO; break; -+ case ACX_MODE_MONITOR: -+ wrqu->mode = IW_MODE_MONITOR; break; -+ case ACX_MODE_0_ADHOC: -+ wrqu->mode = IW_MODE_ADHOC; break; -+ case ACX_MODE_2_STA: -+ wrqu->mode = IW_MODE_INFRA; break; -+ case ACX_MODE_3_AP: -+ wrqu->mode = IW_MODE_MASTER; break; -+ default: -+ result = -EOPNOTSUPP; -+ } -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_set_sens( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->sens; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ acx_sem_lock(adev); -+ -+ adev->sensitivity = (1 == vwrq->disabled) ? 0 : vwrq->value; -+ SET_BIT(adev->set_mask, GETSET_SENSITIVITY); -+ -+ acx_sem_unlock(adev); -+ -+ return -EINPROGRESS; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_sens( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->sens; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ if (IS_USB(adev)) -+ /* setting the PHY reg via fw cmd doesn't work yet */ -+ return -EOPNOTSUPP; -+ -+ /* acx_sem_lock(adev); */ -+ -+ vwrq->value = adev->sensitivity; -+ vwrq->disabled = (vwrq->value == 0); -+ vwrq->fixed = 1; -+ -+ /* acx_sem_unlock(adev); */ -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_ap -+** -+** Sets the MAC address of the AP to associate with -+*/ -+static int -+acx_ioctl_set_ap( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct sockaddr *awrq = &wrqu->ap_addr; -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = 0; -+ const u8 *ap; -+ -+ FN_ENTER; -+ if (NULL == awrq) { -+ result = -EFAULT; -+ goto end; -+ } -+ if (ARPHRD_ETHER != awrq->sa_family) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ ap = awrq->sa_data; -+ acxlog_mac(L_IOCTL, "set AP=", ap, "\n"); -+ -+ MAC_COPY(adev->ap, ap); -+ -+ /* We want to start rescan in managed or ad-hoc mode, -+ ** otherwise just set adev->ap. -+ ** "iwconfig ap mode managed": we must be able -+ ** to set ap _first_ and _then_ set mode */ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ /* FIXME: if there is a convention on what zero AP means, -+ ** please add a comment about that. I don't know of any --vda */ -+ if (mac_is_zero(ap)) { -+ /* "off" == 00:00:00:00:00:00 */ -+ MAC_BCAST(adev->ap); -+ log(L_IOCTL, "Not reassociating\n"); -+ } else { -+ log(L_IOCTL, "Forcing reassociation\n"); -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ } -+ break; -+ } -+ result = -EINPROGRESS; -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_ap( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct sockaddr *awrq = &wrqu->ap_addr; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ if (ACX_STATUS_4_ASSOCIATED == adev->status) { -+ /* as seen in Aironet driver, airo.c */ -+ MAC_COPY(awrq->sa_data, adev->bssid); -+ } else { -+ MAC_ZERO(awrq->sa_data); -+ } -+ awrq->sa_family = ARPHRD_ETHER; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_aplist -+** -+** Deprecated in favor of iwscan. -+** We simply return the list of currently available stations in range, -+** don't do a new scan. -+*/ -+static int -+acx_ioctl_get_aplist( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->data; -+ acx_device_t *adev = ndev2adev(ndev); -+ struct sockaddr *address = (struct sockaddr *) extra; -+ struct iw_quality qual[IW_MAX_AP]; -+ int i, cur; -+ int result = OK; -+ -+ FN_ENTER; -+ -+ /* we have AP list only in STA mode */ -+ if (ACX_MODE_2_STA != adev->mode) { -+ result = -EOPNOTSUPP; -+ goto end; -+ } -+ -+ cur = 0; -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ struct client *bss = &adev->sta_list[i]; -+ if (!bss->used) continue; -+ MAC_COPY(address[cur].sa_data, bss->bssid); -+ address[cur].sa_family = ARPHRD_ETHER; -+ qual[cur].level = bss->sir; -+ qual[cur].noise = bss->snr; -+#ifndef OLD_QUALITY -+ qual[cur].qual = acx_signal_determine_quality(qual[cur].level, -+ qual[cur].noise); -+#else -+ qual[cur].qual = (qual[cur].noise <= 100) ? -+ 100 - qual[cur].noise : 0; -+#endif -+ /* no scan: level/noise/qual not updated: */ -+ qual[cur].updated = 0; -+ cur++; -+ } -+ if (cur) { -+ dwrq->flags = 1; -+ memcpy(extra + sizeof(struct sockaddr)*cur, &qual, -+ sizeof(struct iw_quality)*cur); -+ } -+ dwrq->length = cur; -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_set_scan( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* don't start scan if device is not up yet */ -+ if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { -+ result = -EAGAIN; -+ goto end_unlock; -+ } -+ -+ /* This is NOT a rescan for new AP! -+ ** Do not use SET_BIT(GETSET_RESCAN); */ -+ acx_s_cmd_start_scan(adev); -+ result = OK; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+/* end: */ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_s_scan_add_station -+*/ -+/* helper. not sure whether it's really a _s_leeping fn */ -+static char* -+acx_s_scan_add_station( -+ acx_device_t *adev, -+ char *ptr, -+ char *end_buf, -+ struct client *bss) -+{ -+ struct iw_event iwe; -+ char *ptr_rate; -+ -+ FN_ENTER; -+ -+ /* MAC address has to be added first */ -+ iwe.cmd = SIOCGIWAP; -+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER; -+ MAC_COPY(iwe.u.ap_addr.sa_data, bss->bssid); -+ acxlog_mac(L_IOCTL, "scan, station address: ", bss->bssid, "\n"); -+ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_ADDR_LEN); -+ -+ /* Add ESSID */ -+ iwe.cmd = SIOCGIWESSID; -+ iwe.u.data.length = bss->essid_len; -+ iwe.u.data.flags = 1; -+ log(L_IOCTL, "scan, essid: %s\n", bss->essid); -+ ptr = iwe_stream_add_point(ptr, end_buf, &iwe, bss->essid); -+ -+ /* Add mode */ -+ iwe.cmd = SIOCGIWMODE; -+ if (bss->cap_info & (WF_MGMT_CAP_ESS | WF_MGMT_CAP_IBSS)) { -+ if (bss->cap_info & WF_MGMT_CAP_ESS) -+ iwe.u.mode = IW_MODE_MASTER; -+ else -+ iwe.u.mode = IW_MODE_ADHOC; -+ log(L_IOCTL, "scan, mode: %d\n", iwe.u.mode); -+ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_UINT_LEN); -+ } -+ -+ /* Add frequency */ -+ iwe.cmd = SIOCGIWFREQ; -+ iwe.u.freq.m = acx_channel_freq[bss->channel - 1] * 100000; -+ iwe.u.freq.e = 1; -+ log(L_IOCTL, "scan, frequency: %d\n", iwe.u.freq.m); -+ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_FREQ_LEN); -+ -+ /* Add link quality */ -+ iwe.cmd = IWEVQUAL; -+ /* FIXME: these values should be expressed in dBm, but we don't know -+ * how to calibrate it yet */ -+ iwe.u.qual.level = bss->sir; -+ iwe.u.qual.noise = bss->snr; -+#ifndef OLD_QUALITY -+ iwe.u.qual.qual = acx_signal_determine_quality(iwe.u.qual.level, -+ iwe.u.qual.noise); -+#else -+ iwe.u.qual.qual = (iwe.u.qual.noise <= 100) ? -+ 100 - iwe.u.qual.noise : 0; -+#endif -+ iwe.u.qual.updated = 7; -+ log(L_IOCTL, "scan, link quality: %d/%d/%d\n", -+ iwe.u.qual.level, iwe.u.qual.noise, iwe.u.qual.qual); -+ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_QUAL_LEN); -+ -+ /* Add encryption */ -+ iwe.cmd = SIOCGIWENCODE; -+ if (bss->cap_info & WF_MGMT_CAP_PRIVACY) -+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; -+ else -+ iwe.u.data.flags = IW_ENCODE_DISABLED; -+ iwe.u.data.length = 0; -+ log(L_IOCTL, "scan, encryption flags: %X\n", iwe.u.data.flags); -+ ptr = iwe_stream_add_point(ptr, end_buf, &iwe, bss->essid); -+ -+ /* add rates */ -+ iwe.cmd = SIOCGIWRATE; -+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; -+ ptr_rate = ptr + IW_EV_LCP_LEN; -+ -+ { -+ u16 rate = bss->rate_cap; -+ const u8* p = acx_bitpos2ratebyte; -+ while (rate) { -+ if (rate & 1) { -+ iwe.u.bitrate.value = *p * 500000; /* units of 500kb/s */ -+ log(L_IOCTL, "scan, rate: %d\n", iwe.u.bitrate.value); -+ ptr_rate = iwe_stream_add_value(ptr, ptr_rate, end_buf, -+ &iwe, IW_EV_PARAM_LEN); -+ } -+ rate >>= 1; -+ p++; -+ }} -+ -+ if ((ptr_rate - ptr) > (ptrdiff_t)IW_EV_LCP_LEN) -+ ptr = ptr_rate; -+ -+ /* drop remaining station data items for now */ -+ -+ FN_EXIT0; -+ return ptr; -+} -+ -+ -+/*********************************************************************** -+ * acx_ioctl_get_scan -+ */ -+static int -+acx_ioctl_get_scan( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->data; -+ acx_device_t *adev = ndev2adev(ndev); -+ char *ptr = extra; -+ int i; -+ int result = OK; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* no scan available if device is not up yet */ -+ if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { -+ log(L_IOCTL, "iface not up yet\n"); -+ result = -EAGAIN; -+ goto end_unlock; -+ } -+ -+#ifdef ENODATA_TO_BE_USED_AFTER_SCAN_ERROR_ONLY -+ if (adev->bss_table_count == 0) { -+ /* no stations found */ -+ result = -ENODATA; -+ goto end_unlock; -+ } -+#endif -+ -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ struct client *bss = &adev->sta_list[i]; -+ if (!bss->used) continue; -+ ptr = acx_s_scan_add_station(adev, ptr, -+ extra + IW_SCAN_MAX_DATA, bss); -+ } -+ dwrq->length = ptr - extra; -+ dwrq->flags = 0; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+/* end: */ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_essid -+*/ -+static int -+acx_ioctl_set_essid( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->essid; -+ acx_device_t *adev = ndev2adev(ndev); -+ int len = dwrq->length; -+ int result; -+ -+ FN_ENTER; -+ -+ if (len < 0) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ log(L_IOCTL, "set ESSID '%*s', length %d, flags 0x%04X\n", -+ len, extra, len, dwrq->flags); -+ -+#if WIRELESS_EXT >= 21 -+ /* WE 21 gives real ESSID strlen, not +1 (trailing zero): -+ * see LKML "[patch] drivers/net/wireless: correct reported ssid lengths" */ -+ len += 1; -+#endif -+ -+ acx_sem_lock(adev); -+ -+ /* ESSID disabled? */ -+ if (0 == dwrq->flags) { -+ adev->essid_active = 0; -+ -+ } else { -+ if (len > IW_ESSID_MAX_SIZE) { -+ result = -E2BIG; -+ goto end_unlock; -+ } -+ -+ if (len >= sizeof(adev->essid)) -+ len = sizeof(adev->essid) - 1; -+ memcpy(adev->essid, extra, len); -+ adev->essid[len] = '\0'; -+ /* Paranoia: just in case there is a '\0'... */ -+ adev->essid_len = strlen(adev->essid); -+ adev->essid_active = 1; -+ } -+ -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ -+ result = -EINPROGRESS; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_essid( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->essid; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ dwrq->flags = adev->essid_active; -+ if (adev->essid_active) { -+ memcpy(extra, adev->essid, adev->essid_len); -+ extra[adev->essid_len] = '\0'; -+ dwrq->length = adev->essid_len + 1; -+ dwrq->flags = 1; -+ } -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_l_update_client_rates -+*/ -+static void -+acx_l_update_client_rates(acx_device_t *adev, u16 rate) -+{ -+ int i; -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ client_t *clt = &adev->sta_list[i]; -+ if (!clt->used) continue; -+ clt->rate_cfg = (clt->rate_cap & rate); -+ if (!clt->rate_cfg) { -+ /* no compatible rates left: kick client */ -+ acxlog_mac(L_ASSOC, "client ",clt->address," kicked: " -+ "rates are not compatible anymore\n"); -+ acx_l_sta_list_del(adev, clt); -+ continue; -+ } -+ clt->rate_cur &= clt->rate_cfg; -+ if (!clt->rate_cur) { -+ /* current rate become invalid, choose a valid one */ -+ clt->rate_cur = 1 << lowest_bit(clt->rate_cfg); -+ } -+ if (IS_ACX100(adev)) -+ clt->rate_100 = acx_bitpos2rate100[highest_bit(clt->rate_cur)]; -+ clt->fallback_count = clt->stepup_count = 0; -+ clt->ignore_count = 16; -+ } -+ switch (adev->mode) { -+ case ACX_MODE_2_STA: -+ if (adev->ap_client && !adev->ap_client->used) { -+ /* Owwww... we kicked our AP!! :) */ -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ } -+ } -+} -+ -+ -+/*********************************************************************** -+*/ -+/* maps bits from acx111 rate to rate in Mbits */ -+static const unsigned int -+acx111_rate_tbl[] = { -+ 1000000, /* 0 */ -+ 2000000, /* 1 */ -+ 5500000, /* 2 */ -+ 6000000, /* 3 */ -+ 9000000, /* 4 */ -+ 11000000, /* 5 */ -+ 12000000, /* 6 */ -+ 18000000, /* 7 */ -+ 22000000, /* 8 */ -+ 24000000, /* 9 */ -+ 36000000, /* 10 */ -+ 48000000, /* 11 */ -+ 54000000, /* 12 */ -+ 500000, /* 13, should not happen */ -+ 500000, /* 14, should not happen */ -+ 500000, /* 15, should not happen */ -+}; -+ -+/*********************************************************************** -+ * acx_ioctl_set_rate -+ */ -+static int -+acx_ioctl_set_rate( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->param; -+ acx_device_t *adev = ndev2adev(ndev); -+ u16 txrate_cfg = 1; -+ unsigned long flags; -+ int autorate; -+ int result = -EINVAL; -+ -+ FN_ENTER; -+ log(L_IOCTL, "rate %d fixed 0x%X disabled 0x%X flags 0x%X\n", -+ vwrq->value, vwrq->fixed, vwrq->disabled, vwrq->flags); -+ -+ if ((0 == vwrq->fixed) || (1 == vwrq->fixed)) { -+ int i = VEC_SIZE(acx111_rate_tbl)-1; -+ if (vwrq->value == -1) -+ /* "iwconfig rate auto" --> choose highest */ -+ vwrq->value = IS_ACX100(adev) ? 22000000 : 54000000; -+ while (i >= 0) { -+ if (vwrq->value == acx111_rate_tbl[i]) { -+ txrate_cfg <<= i; -+ i = 0; -+ break; -+ } -+ i--; -+ } -+ if (i == -1) { /* no matching rate */ -+ result = -EINVAL; -+ goto end; -+ } -+ } else { /* rate N, N<1000 (driver specific): we don't use this */ -+ result = -EOPNOTSUPP; -+ goto end; -+ } -+ /* now: only one bit is set in txrate_cfg, corresponding to -+ ** indicated rate */ -+ -+ autorate = (vwrq->fixed == 0) && (RATE111_1 != txrate_cfg); -+ if (autorate) { -+ /* convert 00100000 -> 00111111 */ -+ txrate_cfg = (txrate_cfg<<1)-1; -+ } -+ -+ if (IS_ACX100(adev)) { -+ txrate_cfg &= RATE111_ACX100_COMPAT; -+ if (!txrate_cfg) { -+ result = -ENOTSUPP; /* rate is not supported by acx100 */ -+ goto end; -+ } -+ } -+ -+ acx_sem_lock(adev); -+ acx_lock(adev, flags); -+ -+ adev->rate_auto = autorate; -+ adev->rate_oper = txrate_cfg; -+ adev->rate_basic = txrate_cfg; -+ /* only do that in auto mode, non-auto will be able to use -+ * one specific Tx rate only anyway */ -+ if (autorate) { -+ /* only use 802.11b base rates, for standard 802.11b H/W -+ * compatibility */ -+ adev->rate_basic &= RATE111_80211B_COMPAT; -+ } -+ adev->rate_bcast = 1 << lowest_bit(txrate_cfg); -+ if (IS_ACX100(adev)) -+ adev->rate_bcast100 = acx_rate111to100(adev->rate_bcast); -+ acx_l_update_ratevector(adev); -+ acx_l_update_client_rates(adev, txrate_cfg); -+ -+ /* Do/don't do tx rate fallback; beacon contents and rate */ -+ SET_BIT(adev->set_mask, SET_RATE_FALLBACK|SET_TEMPLATES); -+ result = -EINPROGRESS; -+ -+ acx_unlock(adev, flags); -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_rate -+*/ -+static int -+acx_ioctl_get_rate( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->param; -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ u16 rate; -+ -+ acx_lock(adev, flags); -+ rate = adev->rate_oper; -+ if (adev->ap_client) -+ rate = adev->ap_client->rate_cur; -+ vwrq->value = acx111_rate_tbl[highest_bit(rate)]; -+ vwrq->fixed = !adev->rate_auto; -+ vwrq->disabled = 0; -+ acx_unlock(adev, flags); -+ -+ return OK; -+} -+ -+static int -+acx_ioctl_set_rts( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->rts; -+ acx_device_t *adev = ndev2adev(ndev); -+ int val = vwrq->value; -+ -+ if (vwrq->disabled) -+ val = 2312; -+ if ((val < 0) || (val > 2312)) -+ return -EINVAL; -+ -+ adev->rts_threshold = val; -+ return OK; -+} -+ -+static inline int -+acx_ioctl_get_rts( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->rts; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ vwrq->value = adev->rts_threshold; -+ vwrq->disabled = (vwrq->value >= 2312); -+ vwrq->fixed = 1; -+ return OK; -+} -+ -+ -+#if ACX_FRAGMENTATION -+static int -+acx_ioctl_set_frag( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int val = vwrq->value; -+ -+ if (vwrq->disabled) -+ val = 32767; -+ else -+ if ((val < 256) || (val > 2347)) -+ return -EINVAL; -+ -+ adev->frag_threshold = val; -+ return OK; -+} -+ -+static inline int -+acx_ioctl_get_frag( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->frag; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ vwrq->value = adev->frag_threshold; -+ vwrq->disabled = (vwrq->value >= 2347); -+ vwrq->fixed = 1; -+ return OK; -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_encode -+*/ -+static int -+acx_ioctl_set_encode( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->encoding; -+ acx_device_t *adev = ndev2adev(ndev); -+ int index; -+ int result; -+ -+ FN_ENTER; -+ -+ log(L_IOCTL, "set encoding flags=0x%04X, size=%d, key: %s\n", -+ dwrq->flags, dwrq->length, extra ? "set" : "No key"); -+ -+ acx_sem_lock(adev); -+ -+ index = (dwrq->flags & IW_ENCODE_INDEX) - 1; -+ -+ if (dwrq->length > 0) { -+ /* if index is 0 or invalid, use default key */ -+ if ((index < 0) || (index > 3)) -+ index = (int)adev->wep_current_index; -+ -+ if (0 == (dwrq->flags & IW_ENCODE_NOKEY)) { -+ if (dwrq->length > 29) -+ dwrq->length = 29; /* restrict it */ -+ -+ if (dwrq->length > 13) { -+ /* 29*8 == 232, WEP256 */ -+ adev->wep_keys[index].size = 29; -+ } else if (dwrq->length > 5) { -+ /* 13*8 == 104bit, WEP128 */ -+ adev->wep_keys[index].size = 13; -+ } else if (dwrq->length > 0) { -+ /* 5*8 == 40bit, WEP64 */ -+ adev->wep_keys[index].size = 5; -+ } else { -+ /* disable key */ -+ adev->wep_keys[index].size = 0; -+ } -+ -+ memset(adev->wep_keys[index].key, 0, -+ sizeof(adev->wep_keys[index].key)); -+ memcpy(adev->wep_keys[index].key, extra, dwrq->length); -+ } -+ } else { -+ /* set transmit key */ -+ if ((index >= 0) && (index <= 3)) -+ adev->wep_current_index = index; -+ else if (0 == (dwrq->flags & IW_ENCODE_MODE)) { -+ /* complain if we were not just setting -+ * the key mode */ -+ result = -EINVAL; -+ goto end_unlock; -+ } -+ } -+ -+ adev->wep_enabled = !(dwrq->flags & IW_ENCODE_DISABLED); -+ -+ if (dwrq->flags & IW_ENCODE_OPEN) { -+ adev->auth_alg = WLAN_AUTH_ALG_OPENSYSTEM; -+ adev->wep_restricted = 0; -+ -+ } else if (dwrq->flags & IW_ENCODE_RESTRICTED) { -+ adev->auth_alg = WLAN_AUTH_ALG_SHAREDKEY; -+ adev->wep_restricted = 1; -+ } -+ -+ /* set flag to make sure the card WEP settings get updated */ -+ SET_BIT(adev->set_mask, GETSET_WEP); -+ -+ log(L_IOCTL, "len=%d, key at 0x%p, flags=0x%X\n", -+ dwrq->length, extra, dwrq->flags); -+ -+ for (index = 0; index <= 3; index++) { -+ if (adev->wep_keys[index].size) { -+ log(L_IOCTL, "index=%d, size=%d, key at 0x%p\n", -+ adev->wep_keys[index].index, -+ (int) adev->wep_keys[index].size, -+ adev->wep_keys[index].key); -+ } -+ } -+ result = -EINPROGRESS; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_encode -+*/ -+static int -+acx_ioctl_get_encode( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->encoding; -+ acx_device_t *adev = ndev2adev(ndev); -+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; -+ -+ FN_ENTER; -+ -+ if (adev->wep_enabled == 0) { -+ dwrq->flags = IW_ENCODE_DISABLED; -+ } else { -+ if ((index < 0) || (index > 3)) -+ index = (int)adev->wep_current_index; -+ -+ dwrq->flags = (adev->wep_restricted == 1) ? -+ IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN; -+ dwrq->length = adev->wep_keys[index].size; -+ -+ memcpy(extra, adev->wep_keys[index].key, -+ adev->wep_keys[index].size); -+ } -+ -+ /* set the current index */ -+ SET_BIT(dwrq->flags, index + 1); -+ -+ log(L_IOCTL, "len=%d, key=%p, flags=0x%X\n", -+ dwrq->length, dwrq->pointer, -+ dwrq->flags); -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_set_power( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->power; -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = -EINPROGRESS; -+ -+ FN_ENTER; -+ -+ log(L_IOCTL, "set 802.11 powersave flags=0x%04X\n", vwrq->flags); -+ -+ acx_sem_lock(adev); -+ -+ if (vwrq->disabled) { -+ CLEAR_BIT(adev->ps_wakeup_cfg, PS_CFG_ENABLE); -+ SET_BIT(adev->set_mask, GETSET_POWER_80211); -+ goto end; -+ } -+ if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { -+ u16 ps_timeout = (vwrq->value * 1024) / 1000; -+ -+ if (ps_timeout > 255) -+ ps_timeout = 255; -+ log(L_IOCTL, "setting PS timeout value to %d time units " -+ "due to %dus\n", ps_timeout, vwrq->value); -+ adev->ps_hangover_period = ps_timeout; -+ } else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) { -+ u16 ps_periods = vwrq->value / 1000000; -+ -+ if (ps_periods > 255) -+ ps_periods = 255; -+ log(L_IOCTL, "setting PS period value to %d periods " -+ "due to %dus\n", ps_periods, vwrq->value); -+ adev->ps_listen_interval = ps_periods; -+ CLEAR_BIT(adev->ps_wakeup_cfg, PS_CFG_WAKEUP_MODE_MASK); -+ SET_BIT(adev->ps_wakeup_cfg, PS_CFG_WAKEUP_EACH_ITVL); -+ } -+ -+ switch (vwrq->flags & IW_POWER_MODE) { -+ /* FIXME: are we doing the right thing here? */ -+ case IW_POWER_UNICAST_R: -+ CLEAR_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS); -+ break; -+ case IW_POWER_MULTICAST_R: -+ SET_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS); -+ break; -+ case IW_POWER_ALL_R: -+ SET_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS); -+ break; -+ case IW_POWER_ON: -+ break; -+ default: -+ log(L_IOCTL, "unknown PS mode\n"); -+ result = -EINVAL; -+ goto end; -+ } -+ -+ SET_BIT(adev->ps_wakeup_cfg, PS_CFG_ENABLE); -+ SET_BIT(adev->set_mask, GETSET_POWER_80211); -+end: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx_ioctl_get_power( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->power; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ log(L_IOCTL, "Get 802.11 Power Save flags = 0x%04X\n", vwrq->flags); -+ vwrq->disabled = ((adev->ps_wakeup_cfg & PS_CFG_ENABLE) == 0); -+ if (vwrq->disabled) -+ goto end; -+ -+ if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { -+ vwrq->value = adev->ps_hangover_period * 1000 / 1024; -+ vwrq->flags = IW_POWER_TIMEOUT; -+ } else { -+ vwrq->value = adev->ps_listen_interval * 1000000; -+ vwrq->flags = IW_POWER_PERIOD|IW_POWER_RELATIVE; -+ } -+ if (adev->ps_options & PS_OPT_STILL_RCV_BCASTS) -+ SET_BIT(vwrq->flags, IW_POWER_ALL_R); -+ else -+ SET_BIT(vwrq->flags, IW_POWER_UNICAST_R); -+end: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_txpow -+*/ -+static inline int -+acx_ioctl_get_txpow( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->power; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ vwrq->flags = IW_TXPOW_DBM; -+ vwrq->disabled = 0; -+ vwrq->fixed = 1; -+ vwrq->value = adev->tx_level_dbm; -+ -+ log(L_IOCTL, "get txpower:%d dBm\n", adev->tx_level_dbm); -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_txpow -+*/ -+static int -+acx_ioctl_set_txpow( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->power; -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ log(L_IOCTL, "set txpower:%d, disabled:%d, flags:0x%04X\n", -+ vwrq->value, vwrq->disabled, vwrq->flags); -+ -+ acx_sem_lock(adev); -+ -+ if (vwrq->disabled != adev->tx_disabled) { -+ SET_BIT(adev->set_mask, GETSET_TX); -+ } -+ -+ adev->tx_disabled = vwrq->disabled; -+ if (vwrq->value == -1) { -+ if (vwrq->disabled) { -+ adev->tx_level_dbm = 0; -+ log(L_IOCTL, "disable radio tx\n"); -+ } else { -+ /* adev->tx_level_auto = 1; */ -+ log(L_IOCTL, "set tx power auto (NIY)\n"); -+ } -+ } else { -+ adev->tx_level_dbm = vwrq->value <= 20 ? vwrq->value : 20; -+ /* adev->tx_level_auto = 0; */ -+ log(L_IOCTL, "set txpower=%d dBm\n", adev->tx_level_dbm); -+ } -+ SET_BIT(adev->set_mask, GETSET_TXPOWER); -+ -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_range -+*/ -+static int -+acx_ioctl_get_range( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->data; -+ struct iw_range *range = (struct iw_range *)extra; -+ acx_device_t *adev = ndev2adev(ndev); -+ int i,n; -+ -+ FN_ENTER; -+ -+ if (!dwrq->pointer) -+ goto end; -+ -+ dwrq->length = sizeof(struct iw_range); -+ memset(range, 0, sizeof(struct iw_range)); -+ n = 0; -+ for (i = 1; i <= 14; i++) { -+ if (adev->reg_dom_chanmask & (1 << (i - 1))) { -+ range->freq[n].i = i; -+ range->freq[n].m = acx_channel_freq[i - 1] * 100000; -+ range->freq[n].e = 1; /* units are MHz */ -+ n++; -+ } -+ } -+ range->num_channels = n; -+ range->num_frequency = n; -+ -+ range->min_rts = 0; -+ range->max_rts = 2312; -+ -+#if ACX_FRAGMENTATION -+ range->min_frag = 256; -+ range->max_frag = 2312; -+#endif -+ -+ range->encoding_size[0] = 5; -+ range->encoding_size[1] = 13; -+ range->encoding_size[2] = 29; -+ range->num_encoding_sizes = 3; -+ range->max_encoding_tokens = 4; -+ -+ range->min_pmp = 0; -+ range->max_pmp = 5000000; -+ range->min_pmt = 0; -+ range->max_pmt = 65535 * 1000; -+ range->pmp_flags = IW_POWER_PERIOD; -+ range->pmt_flags = IW_POWER_TIMEOUT; -+ range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R; -+ -+ if (IS_ACX100(adev)) { /* ACX100 has direct radio programming - arbitrary levels, so offer a lot */ -+ for (i = 0; i <= IW_MAX_TXPOWER - 1; i++) -+ range->txpower[i] = 20 * i / (IW_MAX_TXPOWER - 1); -+ range->num_txpower = IW_MAX_TXPOWER; -+ range->txpower_capa = IW_TXPOW_DBM; -+ } -+ else { -+ int count = min(IW_MAX_TXPOWER, (int)adev->cfgopt_power_levels.len); -+ for (i = 0; i <= count; i++) -+ range->txpower[i] = adev->cfgopt_power_levels.list[i]; -+ range->num_txpower = count; -+ /* this list is given in mW */ -+ range->txpower_capa = IW_TXPOW_MWATT; -+ } -+ -+ range->we_version_compiled = WIRELESS_EXT; -+ range->we_version_source = 0x9; -+ -+ range->retry_capa = IW_RETRY_LIMIT; -+ range->retry_flags = IW_RETRY_LIMIT; -+ range->min_retry = 1; -+ range->max_retry = 255; -+ -+ range->r_time_flags = IW_RETRY_LIFETIME; -+ range->min_r_time = 0; -+ /* FIXME: lifetime ranges and orders of magnitude are strange?? */ -+ range->max_r_time = 65535; -+ -+ if (IS_USB(adev)) -+ range->sensitivity = 0; -+ else if (IS_ACX111(adev)) -+ range->sensitivity = 3; -+ else -+ range->sensitivity = 255; -+ -+ for (i=0; i < adev->rate_supported_len; i++) { -+ range->bitrate[i] = (adev->rate_supported[i] & ~0x80) * 500000; -+ /* never happens, but keep it, to be safe: */ -+ if (range->bitrate[i] == 0) -+ break; -+ } -+ range->num_bitrates = i; -+ -+ range->max_qual.qual = 100; -+ range->max_qual.level = 100; -+ range->max_qual.noise = 100; -+ /* TODO: better values */ -+ range->avg_qual.qual = 90; -+ range->avg_qual.level = 80; -+ range->avg_qual.noise = 2; -+ -+end: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** Private functions -+*/ -+ -+/*********************************************************************** -+** acx_ioctl_get_nick -+*/ -+static inline int -+acx_ioctl_get_nick( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->data; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ strcpy(extra, adev->nick); -+ dwrq->length = strlen(extra) + 1; -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_nick -+*/ -+static int -+acx_ioctl_set_nick( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_point *dwrq = &wrqu->data; -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ if (dwrq->length > IW_ESSID_MAX_SIZE + 1) { -+ result = -E2BIG; -+ goto end_unlock; -+ } -+ -+ /* extra includes trailing \0, so it's ok */ -+ strcpy(adev->nick, extra); -+ result = OK; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_retry -+*/ -+static int -+acx_ioctl_get_retry( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->retry; -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned int type = vwrq->flags & IW_RETRY_TYPE; -+ unsigned int modifier = vwrq->flags & IW_RETRY_MODIFIER; -+ int result; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* return the short retry number by default */ -+ if (type == IW_RETRY_LIFETIME) { -+ vwrq->flags = IW_RETRY_LIFETIME; -+ vwrq->value = adev->msdu_lifetime; -+ } else if (modifier == IW_RETRY_MAX) { -+ vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; -+ vwrq->value = adev->long_retry; -+ } else { -+ vwrq->flags = IW_RETRY_LIMIT; -+ if (adev->long_retry != adev->short_retry) -+ SET_BIT(vwrq->flags, IW_RETRY_MIN); -+ vwrq->value = adev->short_retry; -+ } -+ -+ /* can't be disabled */ -+ vwrq->disabled = (u8)0; -+ result = OK; -+ -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_retry -+*/ -+static int -+acx_ioctl_set_retry( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->retry; -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ if (!vwrq) { -+ result = -EFAULT; -+ goto end; -+ } -+ if (vwrq->disabled) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ acx_sem_lock(adev); -+ -+ result = -EINVAL; -+ if (IW_RETRY_LIMIT == (vwrq->flags & IW_RETRY_TYPE)) { -+ printk("old retry limits: short %d long %d\n", -+ adev->short_retry, adev->long_retry); -+ if (vwrq->flags & IW_RETRY_MAX) { -+ adev->long_retry = vwrq->value; -+ } else if (vwrq->flags & IW_RETRY_MIN) { -+ adev->short_retry = vwrq->value; -+ } else { -+ /* no modifier: set both */ -+ adev->long_retry = vwrq->value; -+ adev->short_retry = vwrq->value; -+ } -+ printk("new retry limits: short %d long %d\n", -+ adev->short_retry, adev->long_retry); -+ SET_BIT(adev->set_mask, GETSET_RETRY); -+ result = -EINPROGRESS; -+ } -+ else if (vwrq->flags & IW_RETRY_LIFETIME) { -+ adev->msdu_lifetime = vwrq->value; -+ printk("new MSDU lifetime: %d\n", adev->msdu_lifetime); -+ SET_BIT(adev->set_mask, SET_MSDU_LIFETIME); -+ result = -EINPROGRESS; -+ } -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/************************ private ioctls ******************************/ -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_debug -+*/ -+#if ACX_DEBUG -+static int -+acx_ioctl_set_debug( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ unsigned int debug_new = *((unsigned int *)extra); -+ int result = -EINVAL; -+ -+ log(L_ANY, "setting debug from %04X to %04X\n", acx_debug, debug_new); -+ acx_debug = debug_new; -+ -+ result = OK; -+ return result; -+ -+} -+#endif -+ -+ -+/*********************************************************************** -+** acx_ioctl_list_reg_domain -+*/ -+static int -+acx_ioctl_list_reg_domain( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ int i = 1; -+ const char * const *entry = acx_reg_domain_strings; -+ -+ printk("dom# chan# domain/country\n"); -+ while (*entry) -+ printk("%4d %s\n", i++, *entry++); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_reg_domain -+*/ -+static int -+acx_ioctl_set_reg_domain( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ if ((*extra < 1) || ((size_t)*extra > acx_reg_domain_ids_len)) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ acx_sem_lock(adev); -+ -+ adev->reg_dom_id = acx_reg_domain_ids[*extra - 1]; -+ SET_BIT(adev->set_mask, GETSET_REG_DOMAIN); -+ -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_reg_domain -+*/ -+static int -+acx_ioctl_get_reg_domain( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int dom,i; -+ -+ /* no locking */ -+ dom = adev->reg_dom_id; -+ -+ for (i = 1; i <= acx_reg_domain_ids_len; i++) { -+ if (acx_reg_domain_ids[i-1] == dom) { -+ log(L_IOCTL, "regulatory domain is currently set " -+ "to %d (0x%X): %s\n", i, dom, -+ acx_reg_domain_strings[i-1]); -+ *extra = i; -+ break; -+ } -+ } -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_short_preamble -+*/ -+static const char * const -+preamble_modes[] = { -+ "off", -+ "on", -+ "auto (peer capability dependent)", -+ "unknown mode, error" -+}; -+ -+static int -+acx_ioctl_set_short_preamble( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int i; -+ int result; -+ -+ FN_ENTER; -+ -+ if ((unsigned char)*extra > 2) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ acx_sem_lock(adev); -+ -+ adev->preamble_mode = (u8)*extra; -+ switch (adev->preamble_mode) { -+ case 0: /* long */ -+ adev->preamble_cur = 0; -+ break; -+ case 1: -+ /* short, kick incapable peers */ -+ adev->preamble_cur = 1; -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ client_t *clt = &adev->sta_list[i]; -+ if (!clt->used) continue; -+ if (!(clt->cap_info & WF_MGMT_CAP_SHORT)) { -+ clt->used = CLIENT_EMPTY_SLOT_0; -+ } -+ } -+ switch (adev->mode) { -+ case ACX_MODE_2_STA: -+ if (adev->ap_client && !adev->ap_client->used) { -+ /* We kicked our AP :) */ -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ } -+ } -+ break; -+ case 2: /* auto. short only if all peers are short-capable */ -+ adev->preamble_cur = 1; -+ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { -+ client_t *clt = &adev->sta_list[i]; -+ if (!clt->used) continue; -+ if (!(clt->cap_info & WF_MGMT_CAP_SHORT)) { -+ adev->preamble_cur = 0; -+ break; -+ } -+ } -+ break; -+ } -+ printk("new short preamble setting: configured %s, active %s\n", -+ preamble_modes[adev->preamble_mode], -+ preamble_modes[adev->preamble_cur]); -+ result = OK; -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_short_preamble -+*/ -+static int -+acx_ioctl_get_short_preamble( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ acx_sem_lock(adev); -+ -+ printk("current short preamble setting: configured %s, active %s\n", -+ preamble_modes[adev->preamble_mode], -+ preamble_modes[adev->preamble_cur]); -+ -+ *extra = (char)adev->preamble_mode; -+ -+ acx_sem_unlock(adev); -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_antenna -+** -+** TX and RX antenna can be set separately but this function good -+** for testing 0-4 bits -+*/ -+static int -+acx_ioctl_set_antenna( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ acx_sem_lock(adev); -+ -+ printk("old antenna value: 0x%02X (COMBINED bit mask)\n" -+ "Rx antenna selection:\n" -+ "0x00 ant. 1\n" -+ "0x40 ant. 2\n" -+ "0x80 full diversity\n" -+ "0xc0 partial diversity\n" -+ "0x0f dwell time mask (in units of us)\n" -+ "Tx antenna selection:\n" -+ "0x00 ant. 2\n" /* yep, those ARE reversed! */ -+ "0x20 ant. 1\n" -+ "new antenna value: 0x%02X\n", -+ adev->antenna, (u8)*extra); -+ -+ adev->antenna = (u8)*extra; -+ SET_BIT(adev->set_mask, GETSET_ANTENNA); -+ -+ acx_sem_unlock(adev); -+ -+ return -EINPROGRESS; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_antenna -+*/ -+static int -+acx_ioctl_get_antenna( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ /* no locking. it's pointless to lock a single load */ -+ printk("current antenna value: 0x%02X (COMBINED bit mask)\n" -+ "Rx antenna selection:\n" -+ "0x00 ant. 1\n" -+ "0x40 ant. 2\n" -+ "0x80 full diversity\n" -+ "0xc0 partial diversity\n" -+ "Tx antenna selection:\n" -+ "0x00 ant. 2\n" /* yep, those ARE reversed! */ -+ "0x20 ant. 1\n", adev->antenna); -+ -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_rx_antenna -+** -+** 0 = antenna1; 1 = antenna2; 2 = full diversity; 3 = partial diversity -+** Could anybody test which antenna is the external one? -+*/ -+static int -+acx_ioctl_set_rx_antenna( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ if (*extra > 3) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ printk("old antenna value: 0x%02X\n", adev->antenna); -+ -+ acx_sem_lock(adev); -+ -+ adev->antenna &= 0x3f; -+ SET_BIT(adev->antenna, (*extra << 6)); -+ SET_BIT(adev->set_mask, GETSET_ANTENNA); -+ printk("new antenna value: 0x%02X\n", adev->antenna); -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_tx_antenna -+** -+** Arguments: 0 == antenna2; 1 == antenna1; -+** Could anybody test which antenna is the external one? -+*/ -+static int -+acx_ioctl_set_tx_antenna( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ FN_ENTER; -+ -+ if (*extra > 1) { -+ result = -EINVAL; -+ goto end; -+ } -+ -+ printk("old antenna value: 0x%02X\n", adev->antenna); -+ -+ acx_sem_lock(adev); -+ -+ adev->antenna &= ~0x30; -+ SET_BIT(adev->antenna, ((*extra & 0x01) << 5)); -+ SET_BIT(adev->set_mask, GETSET_ANTENNA); -+ printk("new antenna value: 0x%02X\n", adev->antenna); -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_wlansniff -+** -+** can we just remove this in favor of monitor mode? --vda -+*/ -+static int -+acx_ioctl_wlansniff( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned int *params = (unsigned int*)extra; -+ unsigned int enable = (unsigned int)(params[0] > 0); -+ int result; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* not using printk() here, since it distorts kismet display -+ * when printk messages activated */ -+ log(L_IOCTL, "setting monitor to: 0x%02X\n", params[0]); -+ -+ switch (params[0]) { -+ case 0: -+ /* no monitor mode. hmm, should we simply ignore it -+ * or go back to enabling adev->netdev->type ARPHRD_ETHER? */ -+ break; -+ case 1: -+ adev->monitor_type = ARPHRD_IEEE80211_PRISM; -+ break; -+ case 2: -+ adev->monitor_type = ARPHRD_IEEE80211; -+ break; -+ } -+ -+ if (params[0]) { -+ adev->mode = ACX_MODE_MONITOR; -+ SET_BIT(adev->set_mask, GETSET_MODE); -+ } -+ -+ if (enable) { -+ adev->channel = params[1]; -+ SET_BIT(adev->set_mask, GETSET_RX); -+ } -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_unknown11 -+** FIXME: looks like some sort of "iwpriv kick_sta MAC" but it's broken -+*/ -+static int -+acx_ioctl_unknown11( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+#ifdef BROKEN -+ struct iw_param *vwrq = &wrqu->param; -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ client_t client; -+ int result; -+ -+ acx_sem_lock(adev); -+ acx_lock(adev, flags); -+ -+ acx_l_transmit_disassoc(adev, &client); -+ result = OK; -+ -+ acx_unlock(adev, flags); -+ acx_sem_unlock(adev); -+ -+ return result; -+#endif -+ return -EINVAL; -+} -+ -+ -+/*********************************************************************** -+** debug helper function to be able to debug various issues relatively easily -+*/ -+static int -+acx_ioctl_dbg_set_masks( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ const unsigned int *params = (unsigned int*)extra; -+ int result; -+ -+ acx_sem_lock(adev); -+ -+ log(L_IOCTL, "setting flags in settings mask: " -+ "get_mask %08X set_mask %08X\n" -+ "before: get_mask %08X set_mask %08X\n", -+ params[0], params[1], -+ adev->get_mask, adev->set_mask); -+ SET_BIT(adev->get_mask, params[0]); -+ SET_BIT(adev->set_mask, params[1]); -+ log(L_IOCTL, "after: get_mask %08X set_mask %08X\n", -+ adev->get_mask, adev->set_mask); -+ result = -EINPROGRESS; /* immediately call commit handler */ -+ -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+* acx_ioctl_set_rates -+* -+* This ioctl takes string parameter. Examples: -+* iwpriv wlan0 SetRates "1,2" -+* use 1 and 2 Mbit rates, both are in basic rate set -+* iwpriv wlan0 SetRates "1,2 5,11" -+* use 1,2,5.5,11 Mbit rates. 1 and 2 are basic -+* iwpriv wlan0 SetRates "1,2 5c,11c" -+* same ('c' means 'CCK modulation' and it is a default for 5 and 11) -+* iwpriv wlan0 SetRates "1,2 5p,11p" -+* use 1,2,5.5,11 Mbit, 1,2 are basic. 5 and 11 are using PBCC -+* iwpriv wlan0 SetRates "1,2,5,11 22p" -+* use 1,2,5.5,11,22 Mbit. 1,2,5.5 and 11 are basic. 22 is using PBCC -+* (this is the maximum acx100 can do (modulo x4 mode)) -+* iwpriv wlan0 SetRates "1,2,5,11 22" -+* same. 802.11 defines only PBCC modulation -+* for 22 and 33 Mbit rates, so there is no ambiguity -+* iwpriv wlan0 SetRates "1,2,5,11 6o,9o,12o,18o,24o,36o,48o,54o" -+* 1,2,5.5 and 11 are basic. 11g OFDM rates are enabled but -+* they are not in basic rate set. 22 Mbit is disabled. -+* iwpriv wlan0 SetRates "1,2,5,11 6,9,12,18,24,36,48,54" -+* same. OFDM is default for 11g rates except 22 and 33 Mbit, -+* thus 'o' is optional -+* iwpriv wlan0 SetRates "1,2,5,11 6d,9d,12d,18d,24d,36d,48d,54d" -+* 1,2,5.5 and 11 are basic. 11g CCK-OFDM rates are enabled -+* (acx111 does not support CCK-OFDM, driver will reject this cmd) -+* iwpriv wlan0 SetRates "6,9,12 18,24,36,48,54" -+* 6,9,12 are basic, rest of 11g rates is enabled. Using OFDM -+*/ -+#include "setrate.c" -+ -+/* disallow: 33Mbit (unsupported by hw) */ -+/* disallow: CCKOFDM (unsupported by hw) */ -+static int -+acx111_supported(int mbit, int modulation, void *opaque) -+{ -+ if (mbit==33) return -ENOTSUPP; -+ if (modulation==DOT11_MOD_CCKOFDM) return -ENOTSUPP; -+ return OK; -+} -+ -+static const u16 -+acx111mask[] = { -+ [DOT11_RATE_1 ] = RATE111_1 , -+ [DOT11_RATE_2 ] = RATE111_2 , -+ [DOT11_RATE_5 ] = RATE111_5 , -+ [DOT11_RATE_11] = RATE111_11, -+ [DOT11_RATE_22] = RATE111_22, -+ /* [DOT11_RATE_33] = */ -+ [DOT11_RATE_6 ] = RATE111_6 , -+ [DOT11_RATE_9 ] = RATE111_9 , -+ [DOT11_RATE_12] = RATE111_12, -+ [DOT11_RATE_18] = RATE111_18, -+ [DOT11_RATE_24] = RATE111_24, -+ [DOT11_RATE_36] = RATE111_36, -+ [DOT11_RATE_48] = RATE111_48, -+ [DOT11_RATE_54] = RATE111_54, -+}; -+ -+static u32 -+acx111_gen_mask(int mbit, int modulation, void *opaque) -+{ -+ /* lower 16 bits show selected 1, 2, CCK and OFDM rates */ -+ /* upper 16 bits show selected PBCC rates */ -+ u32 m = acx111mask[rate_mbit2enum(mbit)]; -+ if (modulation==DOT11_MOD_PBCC) -+ return m<<16; -+ return m; -+} -+ -+static int -+verify_rate(u32 rate, int chip_type) -+{ -+ /* never happens. be paranoid */ -+ if (!rate) return -EINVAL; -+ -+ /* disallow: mixing PBCC and CCK at 5 and 11Mbit -+ ** (can be supported, but needs complicated handling in tx code) */ -+ if (( rate & ((RATE111_11+RATE111_5)<<16) ) -+ && ( rate & (RATE111_11+RATE111_5) ) -+ ) { -+ return -ENOTSUPP; -+ } -+ if (CHIPTYPE_ACX100 == chip_type) { -+ if ( rate & ~(RATE111_ACX100_COMPAT+(RATE111_ACX100_COMPAT<<16)) ) -+ return -ENOTSUPP; -+ } -+ return 0; -+} -+ -+static int -+acx_ioctl_set_rates(struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ int result; -+ u32 brate = 0, orate = 0; /* basic, operational rate set */ -+ -+ FN_ENTER; -+ -+ log(L_IOCTL, "set_rates %s\n", extra); -+ result = fill_ratemasks(extra, &brate, &orate, -+ acx111_supported, acx111_gen_mask, 0); -+ if (result) goto end; -+ SET_BIT(orate, brate); -+ log(L_IOCTL, "brate %08X orate %08X\n", brate, orate); -+ -+ result = verify_rate(brate, adev->chip_type); -+ if (result) goto end; -+ result = verify_rate(orate, adev->chip_type); -+ if (result) goto end; -+ -+ acx_sem_lock(adev); -+ acx_lock(adev, flags); -+ -+ adev->rate_basic = brate; -+ adev->rate_oper = orate; -+ /* TODO: ideally, we shall monitor highest basic rate -+ ** which was successfully sent to every peer -+ ** (say, last we checked, everybody could hear 5.5 Mbits) -+ ** and use that for bcasts when we want to reach all peers. -+ ** For beacons, we probably shall use lowest basic rate -+ ** because we want to reach all *potential* new peers too */ -+ adev->rate_bcast = 1 << lowest_bit(brate); -+ if (IS_ACX100(adev)) -+ adev->rate_bcast100 = acx_rate111to100(adev->rate_bcast); -+ adev->rate_auto = !has_only_one_bit(orate); -+ acx_l_update_client_rates(adev, orate); -+ /* TODO: get rid of ratevector, build it only when needed */ -+ acx_l_update_ratevector(adev); -+ -+ /* Do/don't do tx rate fallback; beacon contents and rate */ -+ SET_BIT(adev->set_mask, SET_RATE_FALLBACK|SET_TEMPLATES); -+ result = -EINPROGRESS; -+ -+ acx_unlock(adev, flags); -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_get_phy_chan_busy_percentage -+*/ -+static int -+acx_ioctl_get_phy_chan_busy_percentage( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ struct { -+ u16 type; -+ u16 len; -+ u32 busytime; -+ u32 totaltime; -+ } ACX_PACKED usage; -+ int result; -+ -+ acx_sem_lock(adev); -+ -+ if (OK != acx_s_interrogate(adev, &usage, ACX1xx_IE_MEDIUM_USAGE)) { -+ result = NOT_OK; -+ goto end_unlock; -+ } -+ -+ usage.busytime = le32_to_cpu(usage.busytime); -+ usage.totaltime = le32_to_cpu(usage.totaltime); -+ -+ /* yes, this is supposed to be "Medium" (singular of media), -+ not "average"! OK, reword the message to make it obvious... */ -+ printk("%s: busy percentage of medium (since last invocation): %d%% " -+ "(%u of %u microseconds)\n", -+ ndev->name, -+ usage.busytime / ((usage.totaltime / 100) + 1), -+ usage.busytime, usage.totaltime); -+ -+ result = OK; -+ -+end_unlock: -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_ed_threshold -+*/ -+static inline int -+acx_ioctl_set_ed_threshold( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ acx_sem_lock(adev); -+ -+ printk("old ED threshold value: %d\n", adev->ed_threshold); -+ adev->ed_threshold = (unsigned char)*extra; -+ printk("new ED threshold value: %d\n", (unsigned char)*extra); -+ SET_BIT(adev->set_mask, GETSET_ED_THRESH); -+ -+ acx_sem_unlock(adev); -+ -+ return -EINPROGRESS; -+} -+ -+ -+/*********************************************************************** -+** acx_ioctl_set_cca -+*/ -+static inline int -+acx_ioctl_set_cca( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ acx_sem_lock(adev); -+ -+ printk("old CCA value: 0x%02X\n", adev->cca); -+ adev->cca = (unsigned char)*extra; -+ printk("new CCA value: 0x%02X\n", (unsigned char)*extra); -+ SET_BIT(adev->set_mask, GETSET_CCA); -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static const char * const -+scan_modes[] = { "active", "passive", "background" }; -+ -+static void -+acx_print_scan_params(acx_device_t *adev, const char* head) -+{ -+ printk("%s: %smode %d (%s), min chan time %dTU, " -+ "max chan time %dTU, max scan rate byte: %d\n", -+ adev->ndev->name, head, -+ adev->scan_mode, scan_modes[adev->scan_mode], -+ adev->scan_probe_delay, adev->scan_duration, adev->scan_rate); -+} -+ -+static int -+acx_ioctl_set_scan_params( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ const int *params = (int *)extra; -+ -+ acx_sem_lock(adev); -+ -+ acx_print_scan_params(adev, "old scan parameters: "); -+ if ((params[0] != -1) && (params[0] >= 0) && (params[0] <= 2)) -+ adev->scan_mode = params[0]; -+ if (params[1] != -1) -+ adev->scan_probe_delay = params[1]; -+ if (params[2] != -1) -+ adev->scan_duration = params[2]; -+ if ((params[3] != -1) && (params[3] <= 255)) -+ adev->scan_rate = params[3]; -+ acx_print_scan_params(adev, "new scan parameters: "); -+ SET_BIT(adev->set_mask, GETSET_RESCAN); -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+static int -+acx_ioctl_get_scan_params( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ int *params = (int *)extra; -+ -+ acx_sem_lock(adev); -+ -+ acx_print_scan_params(adev, "current scan parameters: "); -+ params[0] = adev->scan_mode; -+ params[1] = adev->scan_probe_delay; -+ params[2] = adev->scan_duration; -+ params[3] = adev->scan_rate; -+ result = OK; -+ -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx100_ioctl_set_led_power( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ static const char * const led_modes[] = { "off", "on", "LinkQuality" }; -+ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result; -+ -+ acx_sem_lock(adev); -+ -+ printk("%s: power LED status: old %d (%s), ", -+ ndev->name, -+ adev->led_power, -+ led_modes[adev->led_power]); -+ adev->led_power = extra[0]; -+ if (adev->led_power > 2) adev->led_power = 2; -+ printk("new %d (%s)\n", -+ adev->led_power, -+ led_modes[adev->led_power]); -+ -+ if (adev->led_power == 2) { -+ printk("%s: max link quality setting: old %d, ", -+ ndev->name, adev->brange_max_quality); -+ if (extra[1]) -+ adev->brange_max_quality = extra[1]; -+ printk("new %d\n", adev->brange_max_quality); -+ } -+ -+ SET_BIT(adev->set_mask, GETSET_LED_POWER); -+ -+ result = -EINPROGRESS; -+ -+ acx_sem_unlock(adev); -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+static inline int -+acx100_ioctl_get_led_power( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ acx_sem_lock(adev); -+ -+ extra[0] = adev->led_power; -+ if (adev->led_power == 2) -+ extra[1] = adev->brange_max_quality; -+ else -+ extra[1] = -1; -+ -+ acx_sem_unlock(adev); -+ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx111_ioctl_info( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->param; -+ if (!IS_PCI(ndev2adev(ndev))) -+ return OK; -+ return acx111pci_ioctl_info(ndev, info, vwrq, extra); -+} -+ -+ -+/*********************************************************************** -+*/ -+static int -+acx100_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ union iwreq_data *wrqu, -+ char *extra) -+{ -+ struct iw_param *vwrq = &wrqu->param; -+ if (IS_USB(ndev2adev(ndev))) { -+ printk("acx: set_phy_amp_bias() is not supported on USB\n"); -+ return OK; -+ } -+#ifdef ACX_MEM -+ return acx100mem_ioctl_set_phy_amp_bias(ndev, info, vwrq, extra); -+#else -+ return acx100pci_ioctl_set_phy_amp_bias(ndev, info, vwrq, extra); -+#endif -+} -+ -+ -+/*********************************************************************** -+*/ -+static const iw_handler acx_ioctl_handler[] = -+{ -+ acx_ioctl_commit, /* SIOCSIWCOMMIT */ -+ acx_ioctl_get_name, /* SIOCGIWNAME */ -+ NULL, /* SIOCSIWNWID */ -+ NULL, /* SIOCGIWNWID */ -+ acx_ioctl_set_freq, /* SIOCSIWFREQ */ -+ acx_ioctl_get_freq, /* SIOCGIWFREQ */ -+ acx_ioctl_set_mode, /* SIOCSIWMODE */ -+ acx_ioctl_get_mode, /* SIOCGIWMODE */ -+ acx_ioctl_set_sens, /* SIOCSIWSENS */ -+ acx_ioctl_get_sens, /* SIOCGIWSENS */ -+ NULL, /* SIOCSIWRANGE */ -+ acx_ioctl_get_range, /* SIOCGIWRANGE */ -+ NULL, /* SIOCSIWPRIV */ -+ NULL, /* SIOCGIWPRIV */ -+ NULL, /* SIOCSIWSTATS */ -+ NULL, /* SIOCGIWSTATS */ -+#if IW_HANDLER_VERSION > 4 -+ iw_handler_set_spy, /* SIOCSIWSPY */ -+ iw_handler_get_spy, /* SIOCGIWSPY */ -+ iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ -+ iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ -+#else /* IW_HANDLER_VERSION > 4 */ -+#ifdef WIRELESS_SPY -+ NULL /* acx_ioctl_set_spy FIXME */, /* SIOCSIWSPY */ -+ NULL /* acx_ioctl_get_spy */, /* SIOCGIWSPY */ -+#else /* WSPY */ -+ NULL, /* SIOCSIWSPY */ -+ NULL, /* SIOCGIWSPY */ -+#endif /* WSPY */ -+ NULL, /* [nothing] */ -+ NULL, /* [nothing] */ -+#endif /* IW_HANDLER_VERSION > 4 */ -+ acx_ioctl_set_ap, /* SIOCSIWAP */ -+ acx_ioctl_get_ap, /* SIOCGIWAP */ -+ NULL, /* [nothing] */ -+ acx_ioctl_get_aplist, /* SIOCGIWAPLIST */ -+ acx_ioctl_set_scan, /* SIOCSIWSCAN */ -+ acx_ioctl_get_scan, /* SIOCGIWSCAN */ -+ acx_ioctl_set_essid, /* SIOCSIWESSID */ -+ acx_ioctl_get_essid, /* SIOCGIWESSID */ -+ acx_ioctl_set_nick, /* SIOCSIWNICKN */ -+ acx_ioctl_get_nick, /* SIOCGIWNICKN */ -+ NULL, /* [nothing] */ -+ NULL, /* [nothing] */ -+ acx_ioctl_set_rate, /* SIOCSIWRATE */ -+ acx_ioctl_get_rate, /* SIOCGIWRATE */ -+ acx_ioctl_set_rts, /* SIOCSIWRTS */ -+ acx_ioctl_get_rts, /* SIOCGIWRTS */ -+#if ACX_FRAGMENTATION -+ acx_ioctl_set_frag, /* SIOCSIWFRAG */ -+ acx_ioctl_get_frag, /* SIOCGIWFRAG */ -+#else -+ NULL, /* SIOCSIWFRAG */ -+ NULL, /* SIOCGIWFRAG */ -+#endif -+ acx_ioctl_set_txpow, /* SIOCSIWTXPOW */ -+ acx_ioctl_get_txpow, /* SIOCGIWTXPOW */ -+ acx_ioctl_set_retry, /* SIOCSIWRETRY */ -+ acx_ioctl_get_retry, /* SIOCGIWRETRY */ -+ acx_ioctl_set_encode, /* SIOCSIWENCODE */ -+ acx_ioctl_get_encode, /* SIOCGIWENCODE */ -+ acx_ioctl_set_power, /* SIOCSIWPOWER */ -+ acx_ioctl_get_power, /* SIOCGIWPOWER */ -+}; -+ -+ -+/*********************************************************************** -+*/ -+ -+/* if you plan to reorder something, make sure to reorder all other places -+ * accordingly! */ -+/* SET/GET convention: SETs must have even position, GETs odd */ -+#define ACX100_IOCTL SIOCIWFIRSTPRIV -+enum { -+ ACX100_IOCTL_DEBUG = ACX100_IOCTL, -+ ACX100_IOCTL_GET__________UNUSED1, -+ ACX100_IOCTL_SET_PLED, -+ ACX100_IOCTL_GET_PLED, -+ ACX100_IOCTL_SET_RATES, -+ ACX100_IOCTL_LIST_DOM, -+ ACX100_IOCTL_SET_DOM, -+ ACX100_IOCTL_GET_DOM, -+ ACX100_IOCTL_SET_SCAN_PARAMS, -+ ACX100_IOCTL_GET_SCAN_PARAMS, -+ ACX100_IOCTL_SET_PREAMB, -+ ACX100_IOCTL_GET_PREAMB, -+ ACX100_IOCTL_SET_ANT, -+ ACX100_IOCTL_GET_ANT, -+ ACX100_IOCTL_RX_ANT, -+ ACX100_IOCTL_TX_ANT, -+ ACX100_IOCTL_SET_PHY_AMP_BIAS, -+ ACX100_IOCTL_GET_PHY_CHAN_BUSY, -+ ACX100_IOCTL_SET_ED, -+ ACX100_IOCTL_GET__________UNUSED3, -+ ACX100_IOCTL_SET_CCA, -+ ACX100_IOCTL_GET__________UNUSED4, -+ ACX100_IOCTL_MONITOR, -+ ACX100_IOCTL_TEST, -+ ACX100_IOCTL_DBG_SET_MASKS, -+ ACX111_IOCTL_INFO, -+ ACX100_IOCTL_DBG_SET_IO, -+ ACX100_IOCTL_DBG_GET_IO -+}; -+ -+ -+static const iw_handler acx_ioctl_private_handler[] = -+{ -+#if ACX_DEBUG -+[ACX100_IOCTL_DEBUG - ACX100_IOCTL] = acx_ioctl_set_debug, -+#endif -+[ACX100_IOCTL_SET_PLED - ACX100_IOCTL] = acx100_ioctl_set_led_power, -+[ACX100_IOCTL_GET_PLED - ACX100_IOCTL] = acx100_ioctl_get_led_power, -+[ACX100_IOCTL_SET_RATES - ACX100_IOCTL] = acx_ioctl_set_rates, -+[ACX100_IOCTL_LIST_DOM - ACX100_IOCTL] = acx_ioctl_list_reg_domain, -+[ACX100_IOCTL_SET_DOM - ACX100_IOCTL] = acx_ioctl_set_reg_domain, -+[ACX100_IOCTL_GET_DOM - ACX100_IOCTL] = acx_ioctl_get_reg_domain, -+[ACX100_IOCTL_SET_SCAN_PARAMS - ACX100_IOCTL] = acx_ioctl_set_scan_params, -+[ACX100_IOCTL_GET_SCAN_PARAMS - ACX100_IOCTL] = acx_ioctl_get_scan_params, -+[ACX100_IOCTL_SET_PREAMB - ACX100_IOCTL] = acx_ioctl_set_short_preamble, -+[ACX100_IOCTL_GET_PREAMB - ACX100_IOCTL] = acx_ioctl_get_short_preamble, -+[ACX100_IOCTL_SET_ANT - ACX100_IOCTL] = acx_ioctl_set_antenna, -+[ACX100_IOCTL_GET_ANT - ACX100_IOCTL] = acx_ioctl_get_antenna, -+[ACX100_IOCTL_RX_ANT - ACX100_IOCTL] = acx_ioctl_set_rx_antenna, -+[ACX100_IOCTL_TX_ANT - ACX100_IOCTL] = acx_ioctl_set_tx_antenna, -+[ACX100_IOCTL_SET_PHY_AMP_BIAS - ACX100_IOCTL] = acx100_ioctl_set_phy_amp_bias, -+[ACX100_IOCTL_GET_PHY_CHAN_BUSY - ACX100_IOCTL] = acx_ioctl_get_phy_chan_busy_percentage, -+[ACX100_IOCTL_SET_ED - ACX100_IOCTL] = acx_ioctl_set_ed_threshold, -+[ACX100_IOCTL_SET_CCA - ACX100_IOCTL] = acx_ioctl_set_cca, -+[ACX100_IOCTL_MONITOR - ACX100_IOCTL] = acx_ioctl_wlansniff, -+[ACX100_IOCTL_TEST - ACX100_IOCTL] = acx_ioctl_unknown11, -+[ACX100_IOCTL_DBG_SET_MASKS - ACX100_IOCTL] = acx_ioctl_dbg_set_masks, -+[ACX111_IOCTL_INFO - ACX100_IOCTL] = acx111_ioctl_info, -+}; -+ -+ -+static const struct iw_priv_args acx_ioctl_private_args[] = { -+#if ACX_DEBUG -+{ cmd : ACX100_IOCTL_DEBUG, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetDebug" }, -+#endif -+{ cmd : ACX100_IOCTL_SET_PLED, -+ set_args : IW_PRIV_TYPE_BYTE | 2, -+ get_args : 0, -+ name : "SetLEDPower" }, -+{ cmd : ACX100_IOCTL_GET_PLED, -+ set_args : 0, -+ get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2, -+ name : "GetLEDPower" }, -+{ cmd : ACX100_IOCTL_SET_RATES, -+ set_args : IW_PRIV_TYPE_CHAR | 256, -+ get_args : 0, -+ name : "SetRates" }, -+{ cmd : ACX100_IOCTL_LIST_DOM, -+ set_args : 0, -+ get_args : 0, -+ name : "ListRegDomain" }, -+{ cmd : ACX100_IOCTL_SET_DOM, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetRegDomain" }, -+{ cmd : ACX100_IOCTL_GET_DOM, -+ set_args : 0, -+ get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ name : "GetRegDomain" }, -+{ cmd : ACX100_IOCTL_SET_SCAN_PARAMS, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, -+ get_args : 0, -+ name : "SetScanParams" }, -+{ cmd : ACX100_IOCTL_GET_SCAN_PARAMS, -+ set_args : 0, -+ get_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, -+ name : "GetScanParams" }, -+{ cmd : ACX100_IOCTL_SET_PREAMB, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetSPreamble" }, -+{ cmd : ACX100_IOCTL_GET_PREAMB, -+ set_args : 0, -+ get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ name : "GetSPreamble" }, -+{ cmd : ACX100_IOCTL_SET_ANT, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetAntenna" }, -+{ cmd : ACX100_IOCTL_GET_ANT, -+ set_args : 0, -+ get_args : 0, -+ name : "GetAntenna" }, -+{ cmd : ACX100_IOCTL_RX_ANT, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetRxAnt" }, -+{ cmd : ACX100_IOCTL_TX_ANT, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetTxAnt" }, -+{ cmd : ACX100_IOCTL_SET_PHY_AMP_BIAS, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetPhyAmpBias"}, -+{ cmd : ACX100_IOCTL_GET_PHY_CHAN_BUSY, -+ set_args : 0, -+ get_args : 0, -+ name : "GetPhyChanBusy" }, -+{ cmd : ACX100_IOCTL_SET_ED, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetED" }, -+{ cmd : ACX100_IOCTL_SET_CCA, -+ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, -+ get_args : 0, -+ name : "SetCCA" }, -+{ cmd : ACX100_IOCTL_MONITOR, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, -+ get_args : 0, -+ name : "monitor" }, -+{ cmd : ACX100_IOCTL_TEST, -+ set_args : 0, -+ get_args : 0, -+ name : "Test" }, -+{ cmd : ACX100_IOCTL_DBG_SET_MASKS, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, -+ get_args : 0, -+ name : "DbgSetMasks" }, -+{ cmd : ACX111_IOCTL_INFO, -+ set_args : 0, -+ get_args : 0, -+ name : "GetAcx111Info" }, -+{ cmd : ACX100_IOCTL_DBG_SET_IO, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, -+ get_args : 0, -+ name : "DbgSetIO" }, -+{ cmd : ACX100_IOCTL_DBG_GET_IO, -+ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3, -+ get_args : 0, -+ name : "DbgGetIO" }, -+}; -+ -+ -+const struct iw_handler_def acx_ioctl_handler_def = -+{ -+ .num_standard = VEC_SIZE(acx_ioctl_handler), -+ .num_private = VEC_SIZE(acx_ioctl_private_handler), -+ .num_private_args = VEC_SIZE(acx_ioctl_private_args), -+ .standard = (iw_handler *) acx_ioctl_handler, -+ .private = (iw_handler *) acx_ioctl_private_handler, -+ .private_args = (struct iw_priv_args *) acx_ioctl_private_args, -+#if IW_HANDLER_VERSION > 5 -+ .get_wireless_stats = acx_e_get_wireless_stats -+#endif /* IW > 5 */ -+}; -Index: linux-2.6.23/drivers/net/wireless/acx/Kconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/Kconfig 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,113 @@ -+config ACX -+ tristate "TI acx100/acx111 802.11b/g wireless chipsets" -+ depends on NET_RADIO && EXPERIMENTAL -+ select FW_LOADER -+ ---help--- -+ A driver for 802.11b/g wireless cards based on -+ Texas Instruments acx100 and acx111 chipsets. -+ -+ This driver supports Host AP mode that allows -+ your computer to act as an IEEE 802.11 access point. -+ This driver is new and experimental. -+ -+ Texas Instruments did not take part in development of this driver -+ in any way, shape or form. -+ -+ The driver can be compiled as a module and will be named "acx". -+ -+config ACX_PCI -+ bool "TI acx100/acx111 802.11b/g PCI" -+ depends on ACX && PCI -+ ---help--- -+ Include PCI and CardBus support in acx. -+ -+ acx chipsets need their firmware loaded at startup. -+ You will need to provide a firmware image via hotplug. -+ -+ Firmware may be in a form of single image 40-100kb in size -+ (a 'combined' firmware) or two images - main image -+ (again 40-100kb) and radio image (~10kb or less). -+ -+ Firmware images are requested from hotplug using following names: -+ -+ tiacx100 - main firmware image for acx100 chipset -+ tiacx100rNN - radio acx100 firmware for radio type NN -+ tiacx100cNN - combined acx100 firmware for radio type NN -+ tiacx111 - main acx111 firmware -+ tiacx111rNN - radio acx111 firmware for radio type NN -+ tiacx111cNN - combined acx111 firmware for radio type NN -+ -+ Driver will attempt to load combined image first. -+ If no such image is found, it will try to load main image -+ and radio image instead. -+ -+ Firmware files are not covered by GPL and are not distributed -+ with this driver for legal reasons. -+ -+config ACX_USB -+ bool "TI acx100/acx111 802.11b/g USB" -+ depends on ACX && (USB=y || USB=ACX) -+ ---help--- -+ Include USB support in acx. -+ -+ There is only one currently known device in this category, -+ D-Link DWL-120+, but newer devices seem to be on the horizon. -+ -+ acx chipsets need their firmware loaded at startup. -+ You will need to provide a firmware image via hotplug. -+ -+ Firmware for USB device is requested from hotplug -+ by the 'tiacx100usb' name. -+ -+ Firmware files are not covered by GPL and are not distributed -+ with this driver for legal reasons. -+ -+config ACX_MEM -+ bool "TI acx100/acx111 802.11b/g memory mapped slave 16 interface" -+ depends on ACX -+ ---help--- -+ acx chipsets need their firmware loaded at startup. -+ You will need to provide a firmware image via hotplug. -+ -+ Firmware for USB device is requested from hotplug -+ by the 'tiacx100usb' name. -+ -+ Firmware files are not covered by GPL and are not distributed -+ with this driver for legal reasons. -+ -+config ACX_CS -+ bool "TI acx100/acx111 802.11b/g cardbus interface" -+ depends on ACX -+ ---help--- -+ acx chipsets need their firmware loaded at startup. -+ You will need to provide a firmware image via hotplug. -+ -+ This driver is based on memory mapped driver. -+ -+ Firmware files are not covered by GPL and are not distributed -+ with this driver for legal reasons. -+ -+config ACX_HX4700 -+ tristate "ACX support for the iPAQ hx4700 using ACX_MEM" -+ depends on HX4700_CORE && ACX_MEM -+ ---help--- -+ Include memory interface support in acx for the iPAQ hx4700. -+ -+config ACX_HTCUNIVERSAL -+ tristate "ACX support for the HTC Universal using ACX_MEM" -+ depends on HTCUNIVERSAL_CORE && HTC_ASIC3 && ACX_MEM -+ ---help--- -+ Include memory interface support in acx for the HTC Universal. -+ -+config ACX_HTCSABLE -+ tristate "ACX support for the HTC Sable (IPAQ hw6915) using ACX_MEM" -+ depends on MACH_HW6900 && HTC_ASIC3 && ACX_MEM -+ ---help--- -+ Include memory interface support in acx for the HTC Sable (IPAQ hw6915). -+ -+config ACX_RX3000 -+ tristate "ACX support for the iPAQ RX3000 using ACX_MEM" -+ depends on MACH_RX3715 && ACX_MEM && LEDS_ASIC3 -+ ---help--- -+ Include memory interface support in acx for the IPAQ RX3000. -+ -Index: linux-2.6.23/drivers/net/wireless/acx/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/Makefile 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,21 @@ -+#obj-m += acx.o -+ -+#acx-obj-y += pci.o -+#acx-obj-y += usb.o -+ -+#acx-objs := wlan.o conv.o ioctl.o common.o $(acx-obj-y) -+ -+# Use this if you have proper Kconfig integration: -+ -+obj-$(CONFIG_ACX) += acx.o -+obj-$(CONFIG_ACX_HX4700) += hx4700_acx.o -+obj-$(CONFIG_ACX_HTCUNIVERSAL) += htcuniversal_acx.o -+obj-$(CONFIG_ACX_HTCSABLE) += htcsable_acx.o -+obj-$(CONFIG_ACX_RX3000) += rx3000_acx.o -+# -+acx-obj-$(CONFIG_ACX_PCI) += pci.o -+acx-obj-$(CONFIG_ACX_USB) += usb.o -+acx-obj-$(CONFIG_ACX_MEM) += mem.o -+acx-obj-$(CONFIG_ACX_CS) += cs.o -+# -+acx-objs := wlan.o conv.o ioctl.o common.o $(acx-obj-y) -Index: linux-2.6.23/drivers/net/wireless/acx/mem.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/mem.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,5363 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+** -+** Slave memory interface support: -+** -+** Todd Blumer - SDG Systems -+** Bill Reese - HP -+** Eric McCorkle - Shadowsun -+*/ -+#define ACX_MEM 1 -+ -+/* -+ * non-zero makes it dump the ACX memory to the console then -+ * panic when you cat /proc/driver/acx_wlan0_diag -+ */ -+#define DUMP_MEM_DEFINED 1 -+ -+#define DUMP_MEM_DURING_DIAG 0 -+#define DUMP_IF_SLOW 0 -+ -+#define PATCH_AROUND_BAD_SPOTS 1 -+#define HX4700_FIRMWARE_CHECKSUM 0x0036862e -+#define HX4700_ALTERNATE_FIRMWARE_CHECKSUM 0x00368a75 -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+ -+/* Linux 2.6.18+ uses */ -+#ifndef UTS_RELEASE -+#include -+#endif -+ -+#include /* required for Lx 2.6.8 ?? */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx.h" -+#include "acx_hw.h" -+ -+/*********************************************************************** -+*/ -+ -+#define CARD_EEPROM_ID_SIZE 6 -+ -+#include -+ -+#define REG_ACX_VENDOR_ID 0x900 -+/* -+ * This is the vendor id on the HX4700, anyway -+ */ -+#define ACX_VENDOR_ID 0x8400104c -+ -+typedef enum { -+ ACX_SOFT_RESET = 0, -+ -+ ACX_SLV_REG_ADDR, -+ ACX_SLV_REG_DATA, -+ ACX_SLV_REG_ADATA, -+ -+ ACX_SLV_MEM_CP, -+ ACX_SLV_MEM_ADDR, -+ ACX_SLV_MEM_DATA, -+ ACX_SLV_MEM_CTL, -+} acxreg_t; -+ -+/*********************************************************************** -+*/ -+static void acxmem_i_tx_timeout(struct net_device *ndev); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id); -+#else -+static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id, struct pt_regs *regs); -+#endif -+static void acxmem_i_set_multicast_list(struct net_device *ndev); -+ -+static int acxmem_e_open(struct net_device *ndev); -+static int acxmem_e_close(struct net_device *ndev); -+static void acxmem_s_up(struct net_device *ndev); -+static void acxmem_s_down(struct net_device *ndev); -+ -+static void dump_acxmem (acx_device_t *adev, u32 start, int length); -+static int acxmem_complete_hw_reset (acx_device_t *adev); -+static void acxmem_s_delete_dma_regions(acx_device_t *adev); -+ -+static struct platform_device *resume_pdev; -+ -+static int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+acxmem_e_suspend(struct platform_device *pdev, pm_message_t state); -+#else -+acxmem_e_suspend(struct device *pdev, u32 state); -+#endif -+static void -+fw_resumer(struct work_struct *notused); -+//fw_resumer( void *data ); -+ -+static int acx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) -+{ -+ struct net_device *ndev = ptr; -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ /* -+ * Upper level ioctl() handlers send a NETDEV_CHANGEADDR if the MAC address changes. -+ */ -+ -+ if (NETDEV_CHANGEADDR == event) { -+ /* -+ * the upper layers put the new MAC address in ndev->dev_addr; we just copy -+ * it over and update the ACX with it. -+ */ -+ MAC_COPY(adev->dev_addr, adev->ndev->dev_addr); -+ adev->set_mask |= GETSET_STATION_ID; -+ acx_s_update_card_settings (adev); -+ } -+ -+ return 0; -+} -+ -+static struct notifier_block acx_netdev_notifier = { -+ .notifier_call = acx_netdev_event, -+}; -+ -+/*********************************************************************** -+** Register access -+*/ -+ -+/* Pick one */ -+/* #define INLINE_IO static */ -+#define INLINE_IO static inline -+ -+INLINE_IO u32 -+read_id_register (acx_device_t *adev) -+{ -+ writel (0x24, &adev->iobase[ACX_SLV_REG_ADDR]); -+ return readl (&adev->iobase[ACX_SLV_REG_DATA]); -+} -+ -+INLINE_IO u32 -+read_reg32(acx_device_t *adev, unsigned int offset) -+{ -+ u32 val; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ return readl(((u8*)adev->iobase) + addr); -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ val = readl( &adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return val; -+} -+ -+INLINE_IO u16 -+read_reg16(acx_device_t *adev, unsigned int offset) -+{ -+ u16 lo; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ return readw(((u8 *) adev->iobase) + addr); -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ lo = readw( (u16 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return lo; -+} -+ -+INLINE_IO u8 -+read_reg8(acx_device_t *adev, unsigned int offset) -+{ -+ u8 lo; -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) -+ return readb(((u8 *)adev->iobase) + addr); -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ lo = readw( (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+ -+ return (u8)lo; -+} -+ -+INLINE_IO void -+write_reg32(acx_device_t *adev, unsigned int offset, u32 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writel(val, ((u8*)adev->iobase) + addr); -+ return; -+ } -+ -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writel( val, &adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+INLINE_IO void -+write_reg16(acx_device_t *adev, unsigned int offset, u16 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writew(val, ((u8 *)adev->iobase) + addr); -+ return; -+ } -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writew( val, (u16 *) &adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+INLINE_IO void -+write_reg8(acx_device_t *adev, unsigned int offset, u8 val) -+{ -+ u32 addr; -+ -+ if (offset > IO_ACX_ECPU_CTRL) -+ addr = offset; -+ else -+ addr = adev->io[offset]; -+ -+ if (addr < 0x20) { -+ writeb(val, ((u8 *) adev->iobase) + addr); -+ return; -+ } -+ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); -+ writeb( val, (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); -+} -+ -+/* Handle PCI posting properly: -+ * Make sure that writes reach the adapter in case they require to be executed -+ * *before* the next write, by reading a random (and safely accessible) register. -+ * This call has to be made if there is no read following (which would flush the data -+ * to the adapter), yet the written data has to reach the adapter immediately. */ -+INLINE_IO void -+write_flush(acx_device_t *adev) -+{ -+ /* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */ -+ /* faster version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should also be safe): */ -+ (void) readl(adev->iobase); -+} -+ -+INLINE_IO void -+set_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { -+ u32 tmp; -+ -+ tmp = read_reg32 (adev, offset); -+ tmp = tmp | bits; -+ write_reg32 (adev, offset, tmp); -+ write_flush (adev); -+} -+ -+INLINE_IO void -+clear_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { -+ u32 tmp; -+ -+ tmp = read_reg32 (adev, offset); -+ tmp = tmp & ~bits; -+ write_reg32 (adev, offset, tmp); -+ write_flush (adev); -+} -+ -+/* -+ * Copy from PXA memory to the ACX memory. This assumes both the PXA and ACX -+ * addresses are 32 bit aligned. Count is in bytes. -+ */ -+INLINE_IO void -+write_slavemem32 (acx_device_t *adev, u32 slave_address, u32 val) -+{ -+ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, val); -+} -+ -+INLINE_IO u32 -+read_slavemem32 (acx_device_t *adev, u32 slave_address) -+{ -+ u32 val; -+ -+ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); -+ udelay (10); -+ val = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ -+ return val; -+} -+ -+INLINE_IO void -+write_slavemem8 (acx_device_t *adev, u32 slave_address, u8 val) -+{ -+ u32 data; -+ u32 base; -+ int offset; -+ -+ /* -+ * Get the word containing the target address and the byte offset in that word. -+ */ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ data &= ~(0xff << offset); -+ data |= val << offset; -+ write_slavemem32 (adev, base, data); -+} -+ -+INLINE_IO u8 -+read_slavemem8 (acx_device_t *adev, u32 slave_address) -+{ -+ u8 val; -+ u32 base; -+ u32 data; -+ int offset; -+ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ -+ val = (data >> offset) & 0xff; -+ -+ return val; -+} -+ -+/* -+ * doesn't split across word boundaries -+ */ -+INLINE_IO void -+write_slavemem16 (acx_device_t *adev, u32 slave_address, u16 val) -+{ -+ u32 data; -+ u32 base; -+ int offset; -+ -+ /* -+ * Get the word containing the target address and the byte offset in that word. -+ */ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ data &= ~(0xffff << offset); -+ data |= val << offset; -+ write_slavemem32 (adev, base, data); -+} -+ -+/* -+ * doesn't split across word boundaries -+ */ -+INLINE_IO u16 -+read_slavemem16 (acx_device_t *adev, u32 slave_address) -+{ -+ u16 val; -+ u32 base; -+ u32 data; -+ int offset; -+ -+ base = slave_address & ~3; -+ offset = (slave_address & 3) * 8; -+ -+ data = read_slavemem32 (adev, base); -+ -+ val = (data >> offset) & 0xffff; -+ -+ return val; -+} -+ -+/* -+ * Copy from slave memory -+ * -+ * TODO - rewrite using address autoincrement, handle partial words -+ */ -+void -+copy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) { -+ u32 tmp = 0; -+ u8 *ptmp = (u8 *) &tmp; -+ -+ /* -+ * Right now I'm making the assumption that the destination is aligned, but -+ * I'd better check. -+ */ -+ if ((u32) destination & 3) { -+ printk ("acx copy_from_slavemem: warning! destination not word-aligned!\n"); -+ } -+ -+ while (count >= 4) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); -+ udelay (10); -+ *((u32 *) destination) = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ count -= 4; -+ source += 4; -+ destination += 4; -+ } -+ -+ /* -+ * If the word reads above didn't satisfy the count, read one more word -+ * and transfer a byte at a time until the request is satisfied. -+ */ -+ if (count) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); -+ udelay (10); -+ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ while (count--) { -+ *destination++ = *ptmp++; -+ } -+ } -+} -+ -+/* -+ * Copy to slave memory -+ * -+ * TODO - rewrite using autoincrement, handle partial words -+ */ -+void -+copy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) -+{ -+ u32 tmp = 0; -+ u8* ptmp = (u8 *) &tmp; -+ static u8 src[512]; /* make static to avoid huge stack objects */ -+ -+ /* -+ * For now, make sure the source is word-aligned by copying it to a word-aligned -+ * buffer. Someday rewrite to avoid the extra copy. -+ */ -+ if (count > sizeof (src)) { -+ printk ("acx copy_to_slavemem: Warning! buffer overflow!\n"); -+ count = sizeof (src); -+ } -+ memcpy (src, source, count); -+ source = src; -+ -+ while (count >= 4) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, *((u32 *) source)); -+ count -= 4; -+ source += 4; -+ destination += 4; -+ } -+ -+ /* -+ * If there are leftovers read the next word from the acx and merge in -+ * what they want to write. -+ */ -+ if (count) { -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); -+ while (count--) { -+ *ptmp++ = *source++; -+ } -+ /* -+ * reset address in case we're currently in auto-increment mode -+ */ -+ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); -+ udelay (10); -+ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, tmp); -+ udelay (10); -+ } -+ -+} -+ -+/* -+ * Block copy to slave buffers using memory block chain mode. Copies to the ACX -+ * transmit buffer structure with minimal intervention on our part. -+ * Interrupts should be disabled when calling this. -+ */ -+void -+chaincopy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) -+{ -+ u32 val; -+ u32 *data = (u32 *) source; -+ static u8 aligned_source[WLAN_A4FR_MAXLEN_WEP_FCS]; -+ -+ /* -+ * Warn if the pointers don't look right. Destination must fit in [23:5] with -+ * zero elsewhere and source should be 32 bit aligned. -+ * This should never happen since we're in control of both, but I want to know about -+ * it if it does. -+ */ -+ if ((destination & 0x00ffffe0) != destination) { -+ printk ("acx chaincopy: destination block 0x%04x not aligned!\n", destination); -+ } -+ if (count > sizeof aligned_source) { -+ printk( KERN_ERR "chaincopy_to_slavemem overflow!\n" ); -+ count = sizeof aligned_source; -+ } -+ if ((u32) source & 3) { -+ memcpy (aligned_source, source, count); -+ data = (u32 *) aligned_source; -+ } -+ -+ /* -+ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment -+ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word -+ */ -+ val = 2 << 16 | 1 << 2; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); -+ -+ /* -+ * SLV_MEM_CP[23:5] = start of 1st block -+ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 -+ */ -+ val = destination & 0x00ffffe0; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); -+ -+ /* -+ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] -+ */ -+ val = (destination & 0x00ffffe0) + (1<<2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); -+ -+ /* -+ * Write the data to the slave data register, rounding up to the end -+ * of the word containing the last byte (hence the > 0) -+ */ -+ while (count > 0) { -+ writel (*data++, &adev->iobase[ACX_SLV_MEM_DATA]); -+ count -= 4; -+ } -+} -+ -+ -+/* -+ * Block copy from slave buffers using memory block chain mode. Copies from the ACX -+ * receive buffer structures with minimal intervention on our part. -+ * Interrupts should be disabled when calling this. -+ */ -+void -+chaincopy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) -+{ -+ u32 val; -+ u32 *data = (u32 *) destination; -+ static u8 aligned_destination[WLAN_A4FR_MAXLEN_WEP_FCS]; -+ int saved_count = count; -+ -+ /* -+ * Warn if the pointers don't look right. Destination must fit in [23:5] with -+ * zero elsewhere and source should be 32 bit aligned. -+ * Turns out the network stack sends unaligned things, so fix them before -+ * copying to the ACX. -+ */ -+ if ((source & 0x00ffffe0) != source) { -+ printk ("acx chaincopy: source block 0x%04x not aligned!\n", source); -+ dump_acxmem (adev, 0, 0x10000); -+ } -+ if ((u32) destination & 3) { -+ //printk ("acx chaincopy: data destination not word aligned!\n"); -+ data = (u32 *) aligned_destination; -+ if (count > sizeof aligned_destination) { -+ printk( KERN_ERR "chaincopy_from_slavemem overflow!\n" ); -+ count = sizeof aligned_destination; -+ } -+ } -+ -+ /* -+ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment -+ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word -+ */ -+ val = (2 << 16) | (1 << 2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); -+ -+ /* -+ * SLV_MEM_CP[23:5] = start of 1st block -+ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 -+ */ -+ val = source & 0x00ffffe0; -+ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); -+ -+ /* -+ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] -+ */ -+ val = (source & 0x00ffffe0) + (1<<2); -+ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); -+ -+ /* -+ * Read the data from the slave data register, rounding up to the end -+ * of the word containing the last byte (hence the > 0) -+ */ -+ while (count > 0) { -+ *data++ = readl (&adev->iobase[ACX_SLV_MEM_DATA]); -+ count -= 4; -+ } -+ -+ /* -+ * If the destination wasn't aligned, we would have saved it in -+ * the aligned buffer, so copy it where it should go. -+ */ -+ if ((u32) destination & 3) { -+ memcpy (destination, aligned_destination, saved_count); -+ } -+} -+ -+char -+printable (char c) -+{ -+ return ((c >= 20) && (c < 127)) ? c : '.'; -+} -+ -+#if DUMP_MEM_DEFINED > 0 -+static void -+dump_acxmem (acx_device_t *adev, u32 start, int length) -+{ -+ int i; -+ u8 buf[16]; -+ -+ while (length > 0) { -+ printk ("%04x ", start); -+ copy_from_slavemem (adev, buf, start, 16); -+ for (i = 0; (i < 16) && (i < length); i++) { -+ printk ("%02x ", buf[i]); -+ } -+ for (i = 0; (i < 16) && (i < length); i++) { -+ printk ("%c", printable (buf[i])); -+ } -+ printk ("\n"); -+ start += 16; -+ length -= 16; -+ } -+} -+#endif -+ -+static void -+enable_acx_irq(acx_device_t *adev); -+static void -+disable_acx_irq(acx_device_t *adev); -+ -+/* -+ * Return an acx pointer to the next transmit data block. -+ */ -+u32 -+allocate_acx_txbuf_space (acx_device_t *adev, int count) { -+ u32 block, next, last_block; -+ int blocks_needed; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&adev->txbuf_lock, flags); -+ /* -+ * Take 4 off the memory block size to account for the reserved word at the start of -+ * the block. -+ */ -+ blocks_needed = count / (adev->memblocksize - 4); -+ if (count % (adev->memblocksize - 4)) -+ blocks_needed++; -+ -+ if (blocks_needed <= adev->acx_txbuf_blocks_free) { -+ /* -+ * Take blocks at the head of the free list. -+ */ -+ last_block = block = adev->acx_txbuf_free; -+ -+ /* -+ * Follow block pointers through the requested number of blocks both to -+ * find the new head of the free list and to set the flags for the blocks -+ * appropriately. -+ */ -+ while (blocks_needed--) { -+ /* -+ * Keep track of the last block of the allocation -+ */ -+ last_block = adev->acx_txbuf_free; -+ -+ /* -+ * Make sure the end control flag is not set. -+ */ -+ next = read_slavemem32 (adev, adev->acx_txbuf_free) & 0x7ffff; -+ write_slavemem32 (adev, adev->acx_txbuf_free, next); -+ -+ /* -+ * Update the new head of the free list -+ */ -+ adev->acx_txbuf_free = next << 5; -+ adev->acx_txbuf_blocks_free--; -+ -+ } -+ -+ /* -+ * Flag the last block both by clearing out the next pointer -+ * and marking the control field. -+ */ -+ write_slavemem32 (adev, last_block, 0x02000000); -+ -+ /* -+ * If we're out of buffers make sure the free list pointer is NULL -+ */ -+ if (!adev->acx_txbuf_blocks_free) { -+ adev->acx_txbuf_free = 0; -+ } -+ } -+ else { -+ block = 0; -+ } -+ spin_unlock_irqrestore (&adev->txbuf_lock, flags); -+ return block; -+} -+ -+/* -+ * Return buffer space back to the pool by following the next pointers until we find -+ * the block marked as the end. Point the last block to the head of the free list, -+ * then update the head of the free list to point to the newly freed memory. -+ * This routine gets called in interrupt context, so it shouldn't block to protect -+ * the integrity of the linked list. The ISR already holds the lock. -+ */ -+void -+reclaim_acx_txbuf_space (acx_device_t *adev, u32 blockptr) { -+ u32 cur, last, next; -+ unsigned long flags; -+ -+ spin_lock_irqsave (&adev->txbuf_lock, flags); -+ if ((blockptr >= adev->acx_txbuf_start) && -+ (blockptr <= adev->acx_txbuf_start + -+ (adev->acx_txbuf_numblocks - 1) * adev->memblocksize)) { -+ cur = blockptr; -+ do { -+ last = cur; -+ next = read_slavemem32 (adev, cur); -+ -+ /* -+ * Advance to the next block in this allocation -+ */ -+ cur = (next & 0x7ffff) << 5; -+ -+ /* -+ * This block now counts as free. -+ */ -+ adev->acx_txbuf_blocks_free++; -+ } while (!(next & 0x02000000)); -+ -+ /* -+ * last now points to the last block of that allocation. Update the pointer -+ * in that block to point to the free list and reset the free list to the -+ * first block of the free call. If there were no free blocks, make sure -+ * the new end of the list marks itself as truly the end. -+ */ -+ if (adev->acx_txbuf_free) { -+ write_slavemem32 (adev, last, adev->acx_txbuf_free >> 5); -+ } -+ else { -+ write_slavemem32 (adev, last, 0x02000000); -+ } -+ adev->acx_txbuf_free = blockptr; -+ } -+ spin_unlock_irqrestore(&adev->txbuf_lock, flags); -+} -+ -+/* -+ * Initialize the pieces managing the transmit buffer pool on the ACX. The transmit -+ * buffer is a circular queue with one 32 bit word reserved at the beginning of each -+ * block. The upper 13 bits are a control field, of which only 0x02000000 has any -+ * meaning. The lower 19 bits are the address of the next block divided by 32. -+ */ -+void -+init_acx_txbuf (acx_device_t *adev) { -+ -+ /* -+ * acx100_s_init_memory_pools set up txbuf_start and txbuf_numblocks for us. -+ * All we need to do is reset the rest of the bookeeping. -+ */ -+ -+ adev->acx_txbuf_free = adev->acx_txbuf_start; -+ adev->acx_txbuf_blocks_free = adev->acx_txbuf_numblocks; -+ -+ /* -+ * Initialization leaves the last transmit pool block without a pointer back to -+ * the head of the list, but marked as the end of the list. That's how we want -+ * to see it, too, so leave it alone. This is only ever called after a firmware -+ * reset, so the ACX memory is in the state we want. -+ */ -+ -+} -+ -+INLINE_IO int -+adev_present(acx_device_t *adev) -+{ -+ /* fast version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should be safe): */ -+ return readl(adev->iobase) != 0xffffffff; -+} -+ -+/*********************************************************************** -+*/ -+static inline txdesc_t* -+get_txdesc(acx_device_t *adev, int index) -+{ -+ return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size); -+} -+ -+static inline txdesc_t* -+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc) -+{ -+ return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size); -+} -+ -+static txhostdesc_t* -+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return &adev->txhostdesc_start[index*2]; -+} -+ -+static inline client_t* -+get_txc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return adev->txc[index]; -+} -+ -+static inline u16 -+get_txr(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ index /= adev->txdesc_size; -+ return adev->txr[index]; -+} -+ -+static inline void -+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ adev->txc[index] = c; -+ adev->txr[index] = r111; -+} -+ -+ -+/*********************************************************************** -+** EEPROM and PHY read/write helpers -+*/ -+/*********************************************************************** -+** acxmem_read_eeprom_byte -+** -+** Function called to read an octet in the EEPROM. -+** -+** This function is used by acxmem_e_probe to check if the -+** connected card is a legal one or not. -+** -+** Arguments: -+** adev ptr to acx_device structure -+** addr address to read in the EEPROM -+** charbuf ptr to a char. This is where the read octet -+** will be stored -+*/ -+int -+acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf) -+{ -+ int result; -+ int count; -+ -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for EEPROM read\n", -+ adev->ndev->name); -+ result = NOT_OK; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ *charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA); -+ log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf); -+ result = OK; -+ -+fail: -+ return result; -+} -+ -+ -+/*********************************************************************** -+** We don't lock hw accesses here since we never r/w eeprom in IRQ -+** Note: this function sleeps only because of GFP_KERNEL alloc -+*/ -+#ifdef UNUSED -+int -+acxmem_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf) -+{ -+ u8 *data_verify = NULL; -+ unsigned long flags; -+ int count, i; -+ int result = NOT_OK; -+ u16 gpio_orig; -+ -+ printk("acx: WARNING! I would write to EEPROM now. " -+ "Since I really DON'T want to unless you know " -+ "what you're doing (THIS CODE WILL PROBABLY " -+ "NOT WORK YET!), I will abort that now. And " -+ "definitely make sure to make a " -+ "/proc/driver/acx_wlan0_eeprom backup copy first!!! " -+ "(the EEPROM content includes the PCI config header!! " -+ "If you kill important stuff, then you WILL " -+ "get in trouble and people DID get in trouble already)\n"); -+ return OK; -+ -+ FN_ENTER; -+ -+ data_verify = kmalloc(len, GFP_KERNEL); -+ if (!data_verify) { -+ goto end; -+ } -+ -+ /* first we need to enable the OE (EEPROM Output Enable) GPIO line -+ * to be able to write to the EEPROM. -+ * NOTE: an EEPROM writing success has been reported, -+ * but you probably have to modify GPIO_OUT, too, -+ * and you probably need to activate a different GPIO -+ * line instead! */ -+ gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE); -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1); -+ write_flush(adev); -+ -+ /* ok, now start writing the data out */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i)); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 1); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("WARNING, DANGER!!! " -+ "Timeout waiting for EEPROM write\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ } -+ -+ /* disable EEPROM writing */ -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig); -+ write_flush(adev); -+ -+ /* now start a verification run */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("timeout waiting for EEPROM read\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ -+ data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA); -+ } -+ -+ if (0 == memcmp(charbuf, data_verify, len)) -+ result = OK; /* read data matches, success */ -+ -+end: -+ kfree(data_verify); -+ FN_EXIT1(result); -+ return result; -+} -+#endif /* UNUSED */ -+ -+ -+/*********************************************************************** -+** acxmem_s_read_phy_reg -+** -+** Messing with rx/tx disabling and enabling here -+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic -+*/ -+int -+acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) -+{ -+ int result = NOT_OK; -+ int count; -+ -+ FN_ENTER; -+ -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg32(adev, IO_ACX_PHY_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for phy read\n", -+ adev->ndev->name); -+ *charbuf = 0; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ log(L_DEBUG, "count was %u\n", count); -+ *charbuf = read_reg8(adev, IO_ACX_PHY_DATA); -+ -+ log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg); -+ result = OK; -+ goto fail; /* silence compiler warning */ -+fail: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) -+{ -+ int count; -+ FN_ENTER; -+ -+ /* mprusko said that 32bit accesses result in distorted sensitivity -+ * on his card. Unconfirmed, looks like it's not true (most likely since we -+ * now properly flush writes). */ -+ write_reg32(adev, IO_ACX_PHY_DATA, value); -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 1); -+ write_flush(adev); -+ -+ count = 0xffff; -+ while (read_reg32(adev, IO_ACX_PHY_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for phy read\n", -+ adev->ndev->name); -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg); -+ fail: -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+#define NO_AUTO_INCREMENT 1 -+ -+/*********************************************************************** -+** acxmem_s_write_fw -+** -+** Write the firmware image into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** 1 firmware image corrupted -+** 0 success -+*/ -+static int -+acxmem_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset) -+{ -+ int len, size, checkMismatch = -1; -+ u32 sum, v32, tmp, id; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+ write_flush(adev); -+#endif -+#endif -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ sum += p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ len += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+ write_flush(adev); -+#endif -+ write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32); -+ write_flush(adev); -+#endif -+ write_slavemem32 (adev, offset + len - 4, v32); -+ -+ id = read_id_register (adev); -+ -+ /* -+ * check the data written -+ */ -+ tmp = read_slavemem32 (adev, offset + len - 4); -+ if (checkMismatch && (tmp != v32)) { -+ printk ("first data mismatch at 0x%08x good 0x%08x bad 0x%08x id 0x%08x\n", -+ offset + len - 4, v32, tmp, id); -+ checkMismatch = 0; -+ } -+ } -+ log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n", -+ size, sum, le32_to_cpu(fw_image->chksum)); -+ -+ /* compare our checksum with the stored image checksum */ -+ return (sum != le32_to_cpu(fw_image->chksum)); -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_validate_fw -+** -+** Compare the firmware image given with -+** the firmware image written into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** NOT_OK firmware image corrupted or not correctly written -+** OK success -+*/ -+static int -+acxmem_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image, -+ u32 offset) -+{ -+ u32 sum, v32, w32; -+ int len, size; -+ int result = OK; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+#endif -+ -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ p += 4; -+ len += 4; -+ -+#ifdef NOPE -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+#endif -+ udelay(10); -+ w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA); -+#endif -+ w32 = read_slavemem32 (adev, offset + len - 4); -+ -+ if (unlikely(w32 != v32)) { -+ printk("acx: FATAL: firmware upload: " -+ "data parts at offset %d don't match\n(0x%08X vs. 0x%08X)!\n" -+ "I/O timing issues or defective memory, with DWL-xx0+? " -+ "ACX_IO_WIDTH=16 may help. Please report\n", -+ len, v32, w32); -+ result = NOT_OK; -+ break; -+ } -+ -+ sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24); -+ } -+ -+ /* sum control verification */ -+ if (result != NOT_OK) { -+ if (sum != le32_to_cpu(fw_image->chksum)) { -+ printk("acx: FATAL: firmware upload: " -+ "checksums don't match!\n"); -+ result = NOT_OK; -+ } -+ } -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_upload_fw -+** -+** Called from acx_reset_dev -+*/ -+static int -+acxmem_s_upload_fw(acx_device_t *adev) -+{ -+ firmware_image_t *fw_image = NULL; -+ int res = NOT_OK; -+ int try; -+ u32 file_size; -+ char *filename = "WLANGEN.BIN"; -+#ifdef PATCH_AROUND_BAD_SPOTS -+ u32 offset; -+ int i; -+ /* -+ * arm-linux-objdump -d patch.bin, or -+ * od -Ax -t x4 patch.bin after finding the bounds -+ * of the .text section with arm-linux-objdump -s patch.bin -+ */ -+ u32 patch[] = { -+ 0xe584c030, 0xe59fc008, -+ 0xe92d1000, 0xe59fc004, 0xe8bd8000, 0x0000080c, -+ 0x0000aa68, 0x605a2200, 0x2c0a689c, 0x2414d80a, -+ 0x2f00689f, 0x1c27d007, 0x06241e7c, 0x2f000e24, -+ 0xe000d1f6, 0x602e6018, 0x23036468, 0x480203db, -+ 0x60ca6003, 0xbdf0750a, 0xffff0808 -+ }; -+#endif -+ -+ FN_ENTER; -+ /* No combined image; tell common we need the radio firmware, too */ -+ adev->need_radio_fw = 1; -+ -+ fw_image = acx_s_read_fw(adev->dev, filename, &file_size); -+ if (!fw_image) { -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+ } -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxmem_s_write_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_write_fw (main): %d\n", res); -+ if (OK == res) { -+ res = acxmem_s_validate_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_validate_fw " -+ "(main): %d\n", res); -+ } -+ -+ if (OK == res) { -+ SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED); -+ break; -+ } -+ printk("acx: firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+#ifdef PATCH_AROUND_BAD_SPOTS -+ /* -+ * Only want to do this if the firmware is exactly what we expect for an -+ * iPaq 4700; otherwise, bad things would ensue. -+ */ -+ if ((HX4700_FIRMWARE_CHECKSUM == fw_image->chksum) || -+ (HX4700_ALTERNATE_FIRMWARE_CHECKSUM == fw_image->chksum)) { -+ /* -+ * Put the patch after the main firmware image. 0x950c contains -+ * the ACX's idea of the end of the firmware. Use that location to -+ * load ours (which depends on that location being 0xab58) then -+ * update that location to point to after ours. -+ */ -+ -+ offset = read_slavemem32 (adev, 0x950c); -+ -+ log (L_DEBUG, "acx: patching in at 0x%04x\n", offset); -+ -+ for (i = 0; i < sizeof(patch) / sizeof(patch[0]); i++) { -+ write_slavemem32 (adev, offset, patch[i]); -+ offset += sizeof(u32); -+ } -+ -+ /* -+ * Patch the instruction at 0x0804 to branch to our ARM patch at 0xab58 -+ */ -+ write_slavemem32 (adev, 0x0804, 0xea000000 + (0xab58-0x0804-8)/4); -+ -+ /* -+ * Patch the instructions at 0x1f40 to branch to our Thumb patch at 0xab74 -+ * -+ * 4a00 ldr r2, [pc, #0] -+ * 4710 bx r2 -+ * .data 0xab74+1 -+ */ -+ write_slavemem32 (adev, 0x1f40, 0x47104a00); -+ write_slavemem32 (adev, 0x1f44, 0x0000ab74+1); -+ -+ /* -+ * Bump the end of the firmware up to beyond our patch. -+ */ -+ write_slavemem32 (adev, 0x950c, offset); -+ -+ } -+#endif -+ -+ vfree(fw_image); -+ -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_upload_radio -+** -+** Uploads the appropriate radio module firmware into the card. -+*/ -+int -+acxmem_s_upload_radio(acx_device_t *adev) -+{ -+ acx_ie_memmap_t mm; -+ firmware_image_t *radio_image; -+ acx_cmd_radioinit_t radioinit; -+ int res = NOT_OK; -+ int try; -+ u32 offset; -+ u32 size; -+ char filename[sizeof("RADIONN.BIN")]; -+ -+ if (!adev->need_radio_fw) return OK; -+ -+ FN_ENTER; -+ -+ acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+ offset = le32_to_cpu(mm.CodeEnd); -+ -+ snprintf(filename, sizeof(filename), "RADIO%02x.BIN", -+ adev->radio_type); -+ radio_image = acx_s_read_fw(adev->dev, filename, &size); -+ if (!radio_image) { -+ printk("acx: can't load radio module '%s'\n", filename); -+ goto fail; -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxmem_s_write_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res); -+ if (OK == res) { -+ res = acxmem_s_validate_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res); -+ } -+ -+ if (OK == res) -+ break; -+ printk("acx: radio firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); -+ radioinit.offset = cpu_to_le32(offset); -+ -+ /* no endian conversion needed, remains in card CPU area: */ -+ radioinit.len = radio_image->size; -+ -+ vfree(radio_image); -+ -+ if (OK != res) -+ goto fail; -+ -+ /* will take a moment so let's have a big timeout */ -+ acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT, -+ &radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000)); -+ -+ res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+ -+fail: -+ FN_EXIT1(res); -+ return res; -+} -+ -+/*********************************************************************** -+** acxmem_l_reset_mac -+** -+** MAC will be reset -+** Call context: reset_dev -+*/ -+static void -+acxmem_l_reset_mac(acx_device_t *adev) -+{ -+ int count; -+ FN_ENTER; -+ -+ /* halt eCPU */ -+ set_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); -+ -+ /* now do soft reset of eCPU, set bit */ -+ set_regbits (adev, IO_ACX_SOFT_RESET, 0x1); -+ log(L_DEBUG, "%s: enable soft reset...\n", __func__); -+ -+ /* Windows driver sleeps here for a while with this sequence */ -+ for (count = 0; count < 200; count++) { -+ udelay (50); -+ } -+ -+ /* now clear bit again: deassert eCPU reset */ -+ log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__); -+ clear_regbits (adev, IO_ACX_SOFT_RESET, 0x1); -+ -+ /* now start a burst read from initial EEPROM */ -+ set_regbits (adev, IO_ACX_EE_START, 0x1); -+ -+ /* -+ * Windows driver sleeps here for a while with this sequence -+ */ -+ for (count = 0; count < 200; count++) { -+ udelay (50); -+ } -+ -+ /* Windows driver writes 0x10000 to register 0x808 here */ -+ -+ write_reg32 (adev, 0x808, 0x10000); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_verify_init -+*/ -+static int -+acxmem_s_verify_init(acx_device_t *adev) -+{ -+ int result = NOT_OK; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ timeout = jiffies + 2*HZ; -+ for (;;) { -+ u32 irqstat = read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if ((irqstat != 0xFFFFFFFF) && (irqstat & HOST_INT_FCS_THRESHOLD)) { -+ result = OK; -+ write_reg32(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD); -+ break; -+ } -+ if (time_after(jiffies, timeout)) -+ break; -+ /* Init may take up to ~0.5 sec total */ -+ acx_s_msleep(50); -+ } -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** A few low-level helpers -+** -+** Note: these functions are not protected by lock -+** and thus are never allowed to be called from IRQ. -+** Also they must not race with fw upload which uses same hw regs -+*/ -+ -+/*********************************************************************** -+** acxmem_write_cmd_type_status -+*/ -+ -+static inline void -+acxmem_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status) -+{ -+ write_slavemem32 (adev, (u32) adev->cmd_area, type | (status << 16)); -+ write_flush(adev); -+} -+ -+ -+/*********************************************************************** -+** acxmem_read_cmd_type_status -+*/ -+static u32 -+acxmem_read_cmd_type_status(acx_device_t *adev) -+{ -+ u32 cmd_type, cmd_status; -+ -+ cmd_type = read_slavemem32 (adev, (u32) adev->cmd_area); -+ -+ cmd_status = (cmd_type >> 16); -+ cmd_type = (u16)cmd_type; -+ -+ log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n", -+ cmd_type, cmd_status, -+ acx_cmd_status_str(cmd_status)); -+ -+ return cmd_status; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_reset_dev -+** -+** Arguments: -+** netdevice that contains the adev variable -+** Returns: -+** NOT_OK on fail -+** OK on success -+** Side effects: -+** device is hard reset -+** Call context: -+** acxmem_e_probe -+** Comment: -+** This resets the device using low level hardware calls -+** as well as uploads and verifies the firmware to the card -+*/ -+ -+static inline void -+init_mboxes(acx_device_t *adev) -+{ -+ u32 cmd_offs, info_offs; -+ -+ cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS); -+ info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS); -+ adev->cmd_area = (u8*) cmd_offs; -+ adev->info_area = (u8*) info_offs; -+ /* -+ log(L_DEBUG, "iobase2=%p\n" -+ */ -+ log( L_DEBUG, "cmd_mbox_offset=%X cmd_area=%p\n" -+ "info_mbox_offset=%X info_area=%p\n", -+ cmd_offs, adev->cmd_area, -+ info_offs, adev->info_area); -+} -+ -+ -+static inline void -+read_eeprom_area(acx_device_t *adev) -+{ -+#if ACX_DEBUG > 1 -+ int offs; -+ u8 tmp; -+ -+ for (offs = 0x8c; offs < 0xb9; offs++) -+ acxmem_read_eeprom_byte(adev, offs, &tmp); -+#endif -+} -+ -+static int -+acxmem_s_reset_dev(acx_device_t *adev) -+{ -+ const char* msg = ""; -+ unsigned long flags; -+ int result = NOT_OK; -+ u16 hardware_info; -+ u16 ecpu_ctrl; -+ int count; -+ u32 tmp; -+ -+ FN_ENTER; -+ /* -+ write_reg32 (adev, IO_ACX_SLV_MEM_CP, 0); -+ */ -+ /* reset the device to make sure the eCPU is stopped -+ * to upload the firmware correctly */ -+ -+ acx_lock(adev, flags); -+ -+ /* Windows driver does some funny things here */ -+ /* -+ * clear bit 0x200 in register 0x2A0 -+ */ -+ clear_regbits (adev, 0x2A0, 0x200); -+ -+ /* -+ * Set bit 0x200 in ACX_GPIO_OUT -+ */ -+ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); -+ -+ /* -+ * read register 0x900 until its value is 0x8400104C, sleeping -+ * in between reads if it's not immediate -+ */ -+ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); -+ count = 500; -+ while (count-- && (tmp != ACX_VENDOR_ID)) { -+ mdelay (10); -+ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); -+ } -+ -+ /* end what Windows driver does */ -+ -+ acxmem_l_reset_mac(adev); -+ -+ ecpu_ctrl = read_reg32(adev, IO_ACX_ECPU_CTRL) & 1; -+ if (!ecpu_ctrl) { -+ msg = "eCPU is already running. "; -+ goto end_unlock; -+ } -+ -+#ifdef WE_DONT_NEED_THAT_DO_WE -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) { -+ /* eCPU most likely means "embedded CPU" */ -+ msg = "eCPU did not start after boot from flash. "; -+ goto end_unlock; -+ } -+ -+ /* check sense on reset flags */ -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) { -+ printk("%s: eCPU did not start after boot (SOR), " -+ "is this fatal?\n", adev->ndev->name); -+ } -+#endif -+ /* scan, if any, is stopped now, setting corresponding IRQ bit */ -+ adev->irq_status |= HOST_INT_SCAN_COMPLETE; -+ -+ acx_unlock(adev, flags); -+ -+ /* need to know radio type before fw load */ -+ /* Need to wait for arrival of this information in a loop, -+ * most probably since eCPU runs some init code from EEPROM -+ * (started burst read in reset_mac()) which also -+ * sets the radio type ID */ -+ -+ count = 0xffff; -+ do { -+ hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION); -+ if (!--count) { -+ msg = "eCPU didn't indicate radio type"; -+ goto end_fail; -+ } -+ cpu_relax(); -+ } while (!(hardware_info & 0xff00)); /* radio type still zero? */ -+ printk("ACX radio type 0x%02x\n", (hardware_info >> 8) & 0xff); -+ /* printk("DEBUG: count %d\n", count); */ -+ adev->form_factor = hardware_info & 0xff; -+ adev->radio_type = hardware_info >> 8; -+ -+ /* load the firmware */ -+ if (OK != acxmem_s_upload_fw(adev)) -+ goto end_fail; -+ -+ /* acx_s_msleep(10); this one really shouldn't be required */ -+ -+ /* now start eCPU by clearing bit */ -+ clear_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); -+ log(L_DEBUG, "booted eCPU up and waiting for completion...\n"); -+ -+ /* Windows driver clears bit 0x200 in register 0x2A0 here */ -+ clear_regbits (adev, 0x2A0, 0x200); -+ -+ /* Windows driver sets bit 0x200 in ACX_GPIO_OUT here */ -+ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); -+ /* wait for eCPU bootup */ -+ if (OK != acxmem_s_verify_init(adev)) { -+ msg = "timeout waiting for eCPU. "; -+ goto end_fail; -+ } -+ log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n"); -+ init_mboxes(adev); -+ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); -+ -+ /* test that EEPROM is readable */ -+ read_eeprom_area(adev); -+ -+ result = OK; -+ goto end; -+ -+/* Finish error message. Indicate which function failed */ -+end_unlock: -+ acx_unlock(adev, flags); -+end_fail: -+ printk("acx: %sreset_dev() FAILED\n", msg); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_issue_cmd_timeo -+** -+** Sends command to fw, extract result -+** -+** NB: we do _not_ take lock inside, so be sure to not touch anything -+** which may interfere with IRQ handler operation -+** -+** TODO: busy wait is a bit silly, so: -+** 1) stop doing many iters - go to sleep after first -+** 2) go to waitqueue based approach: wait, not poll! -+*/ -+#undef FUNC -+#define FUNC "issue_cmd" -+ -+#if !ACX_DEBUG -+int -+acxmem_s_issue_cmd_timeo( -+ acx_device_t *adev, -+ unsigned int cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout) -+{ -+#else -+int -+acxmem_s_issue_cmd_timeo_debug( -+ acx_device_t *adev, -+ unsigned cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout, -+ const char* cmdstr) -+{ -+ unsigned long start = jiffies; -+#endif -+ const char *devname; -+ unsigned counter; -+ u16 irqtype; -+ int i, j; -+ u8 *p; -+ u16 cmd_status; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ devname = adev->ndev->name; -+ if (!devname || !devname[0] || devname[4]=='%') -+ devname = "acx"; -+ -+ log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n", -+ cmdstr, buflen, cmd_timeout, -+ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); -+ -+ if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) { -+ printk("%s: "FUNC"(): firmware is not loaded yet, " -+ "cannot execute commands!\n", devname); -+ goto bad; -+ } -+ -+ if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) { -+ printk("input buffer (len=%u):\n", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ -+ /* wait for firmware to become idle for our command submission */ -+ timeout = HZ/5; -+ counter = (timeout * 1000 / HZ) - 1; /* in ms */ -+ timeout += jiffies; -+ do { -+ cmd_status = acxmem_read_cmd_type_status(adev); -+ /* Test for IDLE state */ -+ if (!cmd_status) -+ break; -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ if (!counter) { -+ /* the card doesn't get idle, we're in trouble */ -+ printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n", -+ devname, cmd_status); -+#if DUMP_IF_SLOW > 0 -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("not idle"); -+#endif -+ goto bad; -+ } else if (counter < 190) { /* if waited >10ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. " -+ "Please report\n", 199 - counter); -+ } -+ -+ /* now write the parameters of the command if needed */ -+ if (buffer && buflen) { -+ /* if it's an INTERROGATE command, just pass the length -+ * of parameters to read, as data */ -+#if CMD_DISCOVERY -+ if (cmd == ACX1xx_CMD_INTERROGATE) -+ memset_io(adev->cmd_area + 4, 0xAA, buflen); -+#endif -+ /* -+ * slave memory version -+ */ -+ copy_to_slavemem (adev, (u32) (adev->cmd_area + 4), buffer, -+ (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen); -+ } -+ /* now write the actual command type */ -+ acxmem_write_cmd_type_status(adev, cmd, 0); -+ -+ /* clear CMD_COMPLETE bit. can be set only by IRQ handler: */ -+ adev->irq_status &= ~HOST_INT_CMD_COMPLETE; -+ -+ /* execute command */ -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD); -+ write_flush(adev); -+ -+ /* wait for firmware to process command */ -+ -+ /* Ensure nonzero and not too large timeout. -+ ** Also converts e.g. 100->99, 200->199 -+ ** which is nice but not essential */ -+ cmd_timeout = (cmd_timeout-1) | 1; -+ if (unlikely(cmd_timeout > 1199)) -+ cmd_timeout = 1199; -+ -+ /* we schedule away sometimes (timeout can be large) */ -+ counter = cmd_timeout; -+ timeout = jiffies + cmd_timeout * HZ / 1000; -+ do { -+ if (!adev->irqs_active) { /* IRQ disabled: poll */ -+ irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ write_reg16(adev, IO_ACX_IRQ_ACK, -+ HOST_INT_CMD_COMPLETE); -+ break; -+ } -+ } else { /* Wait when IRQ will set the bit */ -+ irqtype = adev->irq_status; -+ if (irqtype & HOST_INT_CMD_COMPLETE) -+ break; -+ } -+ -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ /* save state for debugging */ -+ cmd_status = acxmem_read_cmd_type_status(adev); -+ -+ /* put the card in IDLE state */ -+ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); -+ -+ if (!counter) { /* timed out! */ -+ printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. " -+ "irq bits:0x%04X irq_status:0x%04X timeout:%dms " -+ "cmd_status:%d (%s)\n", -+ devname, (adev->irqs_active) ? "waiting" : "polling", -+ irqtype, adev->irq_status, cmd_timeout, -+ cmd_status, acx_cmd_status_str(cmd_status)); -+ printk("%s: "FUNC"(): device irq status 0x%04x\n", -+ devname, read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES)); -+ printk("%s: "FUNC"(): IO_ACX_IRQ_MASK 0x%04x IO_ACX_FEMR 0x%04x\n", -+ devname, -+ read_reg16 (adev, IO_ACX_IRQ_MASK), -+ read_reg16 (adev, IO_ACX_FEMR)); -+ if (read_reg16 (adev, IO_ACX_IRQ_MASK) == 0xffff) { -+ printk ("acxmem: firmware probably hosed - reloading\n"); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+ { -+ pm_message_t state; -+ acxmem_e_suspend (resume_pdev, state); -+ } -+#else -+ acxmem_e_suspend (adev->dev, 0); -+#endif -+ { -+ struct work_struct *notused; -+ fw_resumer (notused); -+ } -+ } -+ -+ goto bad; -+ } else if (cmd_timeout - counter > 30) { /* if waited >30ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. " -+ "count:%d. Please report\n", -+ (adev->irqs_active) ? "waited" : "polled", -+ cmd_timeout - counter, counter); -+ } -+ -+ if (1 != cmd_status) { /* it is not a 'Success' */ -+ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). " -+ "Took %dms of %d\n", -+ devname, cmd_status, acx_cmd_status_str(cmd_status), -+ cmd_timeout - counter, cmd_timeout); -+ /* zero out result buffer -+ * WARNING: this will trash stack in case of illegally large input -+ * length! */ -+ if (buflen > 388) { -+ /* -+ * 388 is maximum command length -+ */ -+ printk ("invalid length 0x%08x\n", buflen); -+ buflen = 388; -+ } -+ p = (u8 *) buffer; -+ for (i = 0; i < buflen; i+= 16) { -+ printk ("%04x:", i); -+ for (j = 0; (j < 16) && (i+j < buflen); j++) { -+ printk (" %02x", *p++); -+ } -+ printk ("\n"); -+ } -+ -+ if (buffer && buflen) -+ memset(buffer, 0, buflen); -+ goto bad; -+ } -+ -+ /* read in result parameters if needed */ -+ if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) { -+ copy_from_slavemem (adev, buffer, (u32) (adev->cmd_area + 4), buflen); -+ if (acx_debug & L_DEBUG) { -+ printk("output buffer (len=%u): ", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ } -+ -+/* ok: */ -+ log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n", -+ cmdstr, jiffies - start); -+ FN_EXIT1(OK); -+ return OK; -+ -+bad: -+ /* Give enough info so that callers can avoid -+ ** printing their own diagnostic messages */ -+#if ACX_DEBUG -+ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); -+#else -+ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); -+#endif -+ dump_stack(); -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+#if defined(NONESSENTIAL_FEATURES) -+typedef struct device_id { -+ unsigned char id[6]; -+ char *descr; -+ char *type; -+} device_id_t; -+ -+static const device_id_t -+device_ids[] = -+{ -+ { -+ {'G', 'l', 'o', 'b', 'a', 'l'}, -+ NULL, -+ NULL, -+ }, -+ { -+ {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, -+ "uninitialized", -+ "SpeedStream SS1021 or Gigafast WF721-AEX" -+ }, -+ { -+ {0x80, 0x81, 0x82, 0x83, 0x84, 0x85}, -+ "non-standard", -+ "DrayTek Vigor 520" -+ }, -+ { -+ {'?', '?', '?', '?', '?', '?'}, -+ "non-standard", -+ "Level One WPC-0200" -+ }, -+ { -+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, -+ "empty", -+ "DWL-650+ variant" -+ } -+}; -+ -+static void -+acx_show_card_eeprom_id(acx_device_t *adev) -+{ -+ unsigned char buffer[CARD_EEPROM_ID_SIZE]; -+ int i; -+ -+ memset(&buffer, 0, CARD_EEPROM_ID_SIZE); -+ /* use direct EEPROM access */ -+ for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) { -+ if (OK != acxmem_read_eeprom_byte(adev, -+ ACX100_EEPROM_ID_OFFSET + i, -+ &buffer[i])) { -+ printk("acx: reading EEPROM FAILED\n"); -+ break; -+ } -+ } -+ -+ for (i = 0; i < VEC_SIZE(device_ids); i++) { -+ if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) { -+ if (device_ids[i].descr) { -+ printk("acx: EEPROM card ID string check " -+ "found %s card ID: is this %s?\n", -+ device_ids[i].descr, device_ids[i].type); -+ } -+ break; -+ } -+ } -+ if (i == VEC_SIZE(device_ids)) { -+ printk("acx: EEPROM card ID string check found " -+ "unknown card: expected 'Global', got '%.*s\'. " -+ "Please report\n", CARD_EEPROM_ID_SIZE, buffer); -+ } -+} -+#endif /* NONESSENTIAL_FEATURES */ -+ -+/*********************************************************************** -+** acxmem_free_desc_queues -+** -+** Releases the queues that have been allocated, the -+** others have been initialised to NULL so this -+** function can be used if only part of the queues were allocated. -+*/ -+ -+void -+acxmem_free_desc_queues(acx_device_t *adev) -+{ -+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \ -+ if (ptr) { \ -+ kfree(ptr); \ -+ ptr = NULL; \ -+ size = 0; \ -+ } -+ -+ FN_ENTER; -+ -+ ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy); -+ -+ adev->txdesc_start = NULL; -+ -+ ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy); -+ -+ adev->rxdesc_start = NULL; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_delete_dma_regions -+*/ -+static void -+acxmem_s_delete_dma_regions(acx_device_t *adev) -+{ -+ unsigned long flags; -+ -+ FN_ENTER; -+ /* disable radio Tx/Rx. Shouldn't we use the firmware commands -+ * here instead? Or are we that much down the road that it's no -+ * longer possible here? */ -+ /* -+ * slave memory interface really doesn't like this. -+ */ -+ /* -+ write_reg16(adev, IO_ACX_ENABLE, 0); -+ */ -+ -+ acx_s_msleep(100); -+ -+ acx_lock(adev, flags); -+ acxmem_free_desc_queues(adev); -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_probe -+** -+** Probe routine called when a PCI device w/ matching ID is found. -+** Here's the sequence: -+** - Allocate the PCI resources. -+** - Read the PCMCIA attribute memory to make sure we have a WLAN card -+** - Reset the MAC -+** - Initialize the dev and wlan data -+** - Initialize the MAC -+** -+** pdev - ptr to pci device structure containing info about pci configuration -+** id - ptr to the device id entry that matched this device -+*/ -+static const u16 -+IO_ACX100[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_END_CTL */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x007c, /* IO_ACX_INT_TRIG */ -+ 0x0098, /* IO_ACX_IRQ_MASK */ -+ 0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00ac, /* IO_ACX_IRQ_ACK */ -+ 0x00b0, /* IO_ACX_HINT_TRIG */ -+ -+ 0x0104, /* IO_ACX_ENABLE */ -+ -+ 0x0250, /* IO_ACX_EEPROM_CTL */ -+ 0x0254, /* IO_ACX_EEPROM_ADDR */ -+ 0x0258, /* IO_ACX_EEPROM_DATA */ -+ 0x025c, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0268, /* IO_ACX_PHY_ADDR */ -+ 0x026c, /* IO_ACX_PHY_DATA */ -+ 0x0270, /* IO_ACX_PHY_CTL */ -+ -+ 0x0290, /* IO_ACX_GPIO_OE */ -+ -+ 0x0298, /* IO_ACX_GPIO_OUT */ -+ -+ 0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x02ac, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x02d0, /* IO_ACX_EE_START */ -+ 0x02d4, /* IO_ACX_SOR_CFG */ -+ 0x02d8 /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static const u16 -+IO_ACX111[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_MEM_CP */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x00b4, /* IO_ACX_INT_TRIG */ -+ 0x00d4, /* IO_ACX_IRQ_MASK */ -+ /* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */ -+ 0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00e8, /* IO_ACX_IRQ_ACK */ -+ 0x00ec, /* IO_ACX_HINT_TRIG */ -+ -+ 0x01d0, /* IO_ACX_ENABLE */ -+ -+ 0x0338, /* IO_ACX_EEPROM_CTL */ -+ 0x033c, /* IO_ACX_EEPROM_ADDR */ -+ 0x0340, /* IO_ACX_EEPROM_DATA */ -+ 0x0344, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0350, /* IO_ACX_PHY_ADDR */ -+ 0x0354, /* IO_ACX_PHY_DATA */ -+ 0x0358, /* IO_ACX_PHY_CTL */ -+ -+ 0x0374, /* IO_ACX_GPIO_OE */ -+ -+ 0x037c, /* IO_ACX_GPIO_OUT */ -+ -+ 0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x0390, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x0100, /* IO_ACX_EE_START */ -+ 0x0104, /* IO_ACX_SOR_CFG */ -+ 0x0108, /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static void -+dummy_netdev_init(struct net_device *ndev) {} -+ -+/* -+ * Most of the acx specific pieces of hardware reset. -+ */ -+static int -+acxmem_complete_hw_reset (acx_device_t *adev) -+{ -+ acx111_ie_configoption_t co; -+ -+ /* NB: read_reg() reads may return bogus data before reset_dev(), -+ * since the firmware which directly controls large parts of the I/O -+ * registers isn't initialized yet. -+ * acx100 seems to be more affected than acx111 */ -+ if (OK != acxmem_s_reset_dev (adev)) -+ return -1; -+ -+ if (IS_ACX100(adev)) { -+ /* ACX100: configopt struct in cmd mailbox - directly after reset */ -+ copy_from_slavemem (adev, (u8*) &co, (u32) adev->cmd_area, sizeof (co)); -+ } -+ -+ if (OK != acx_s_init_mac(adev)) -+ return -3; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111: configopt struct needs to be queried after full init */ -+ acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS); -+ } -+ -+ /* -+ * Set up transmit buffer administration -+ */ -+ init_acx_txbuf (adev); -+ -+ /* -+ * Windows driver writes 0x01000000 to register 0x288, RADIO_CTL, if the form factor -+ * is 3. It also write protects the EEPROM by writing 1<<9 to GPIO_OUT -+ */ -+ if (adev->form_factor == 3) { -+ set_regbits (adev, 0x288, 0x01000000); -+ set_regbits (adev, 0x298, 1<<9); -+ } -+ -+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */ -+ if (OK != acxmem_read_eeprom_byte(adev, 0x05, &adev->eeprom_version)) -+ return -2; -+ -+ acx_s_parse_configoption(adev, &co); -+ acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */ -+ acx_display_hardware_details(adev); -+ -+ return 0; -+} -+ -+static int __devinit -+acxmem_e_probe(struct platform_device *pdev) -+{ -+ struct acx_hardware_data *hwdata = pdev->dev.platform_data; -+ acx_device_t *adev = NULL; -+ struct net_device *ndev = NULL; -+ const char *chip_name; -+ int result = -EIO; -+ int err; -+ int i; -+ unsigned long addr_size=0; -+ u8 chip_type; -+ -+ FN_ENTER; -+ (void) hwdata->start_hw(); -+ -+ /* FIXME: prism54 calls pci_set_mwi() here, -+ * should we do/support the same? */ -+ -+ /* chiptype is u8 but id->driver_data is ulong -+ ** Works for now (possible values are 1 and 2) */ -+ chip_type = CHIPTYPE_ACX100; -+ /* acx100 and acx111 have different PCI memory regions */ -+ if (chip_type == CHIPTYPE_ACX100) { -+ chip_name = "ACX100"; -+ } else if (chip_type == CHIPTYPE_ACX111) { -+ chip_name = "ACX111"; -+ } else { -+ printk("acx: unknown chip type 0x%04X\n", chip_type); -+ goto fail_unknown_chiptype; -+ } -+ -+ printk("acx: found %s-based wireless network card\n", chip_name); -+ log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug); -+ -+ ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init); -+ /* (NB: memsets to 0 entire area) */ -+ if (!ndev) { -+ printk("acx: no memory for netdevice struct\n"); -+ goto fail_alloc_netdev; -+ } -+ -+ platform_set_drvdata (pdev, ndev); -+ -+ ether_setup(ndev); -+ -+ /* -+ * use platform_data resources that were provided -+ */ -+ ndev->irq = 0; -+ for (i=0; inum_resources; i++) { -+ if (pdev->resource[i].flags == IORESOURCE_IRQ) { -+ ndev->irq = pdev->resource[i].start; -+ } -+ else if (pdev->resource[i].flags == IORESOURCE_MEM) { -+ ndev->base_addr = pdev->resource[i].start; -+ addr_size = pdev->resource[i].end - pdev->resource[i].start; -+ } -+ } -+ if (addr_size == 0 || ndev->irq == 0) -+ goto fail_hw_params; -+ ndev->open = &acxmem_e_open; -+ ndev->stop = &acxmem_e_close; -+ pdev->dev.release = &acxmem_e_release; -+ ndev->hard_start_xmit = &acx_i_start_xmit; -+ ndev->get_stats = &acx_e_get_stats; -+#if IW_HANDLER_VERSION <= 5 -+ ndev->get_wireless_stats = &acx_e_get_wireless_stats; -+#endif -+ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -+ ndev->set_multicast_list = &acxmem_i_set_multicast_list; -+ ndev->tx_timeout = &acxmem_i_tx_timeout; -+ ndev->change_mtu = &acx_e_change_mtu; -+ ndev->watchdog_timeo = 4 * HZ; -+ -+ adev = ndev2adev(ndev); -+ spin_lock_init(&adev->lock); /* initial state: unlocked */ -+ spin_lock_init(&adev->txbuf_lock); -+ /* We do not start with downed sem: we want PARANOID_LOCKING to work */ -+ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ -+ /* since nobody can see new netdev yet, we can as well -+ ** just _presume_ that we're under sem (instead of actually taking it): */ -+ /* acx_sem_lock(adev); */ -+ adev->dev = &pdev->dev; -+ adev->ndev = ndev; -+ adev->dev_type = DEVTYPE_MEM; -+ adev->chip_type = chip_type; -+ adev->chip_name = chip_name; -+ adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111; -+ adev->membase = (volatile u32 *) ndev->base_addr; -+ adev->iobase = (volatile u32 *) ioremap_nocache (ndev->base_addr, addr_size); -+ /* to find crashes due to weird driver access -+ * to unconfigured interface (ifup) */ -+ adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead; -+ -+#if defined(NONESSENTIAL_FEATURES) -+ acx_show_card_eeprom_id(adev); -+#endif /* NONESSENTIAL_FEATURES */ -+ -+#ifdef SET_MODULE_OWNER -+ SET_MODULE_OWNER(ndev); -+#endif -+ SET_NETDEV_DEV(ndev, &pdev->dev); -+ -+ log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq); -+ -+ /* ok, pci setup is finished, now start initializing the card */ -+ -+ if (OK != acxmem_complete_hw_reset (adev)) -+ goto fail_reset; -+ -+ /* -+ * Set up default things for most of the card settings. -+ */ -+ acx_s_set_defaults(adev); -+ -+ /* Register the card, AFTER everything else has been set up, -+ * since otherwise an ioctl could step on our feet due to -+ * firmware operations happening in parallel or uninitialized data */ -+ err = register_netdev(ndev); -+ if (OK != err) { -+ printk("acx: register_netdev() FAILED: %d\n", err); -+ goto fail_register_netdev; -+ } -+ -+ acx_proc_register_entries(ndev); -+ -+ /* Now we have our device, so make sure the kernel doesn't try -+ * to send packets even though we're not associated to a network yet */ -+ acx_stop_queue(ndev, "on probe"); -+ acx_carrier_off(ndev, "on probe"); -+ -+ /* -+ * Set up a default monitor type so that poor combinations of initialization -+ * sequences in monitor mode don't end up destroying the hardware type. -+ */ -+ adev->monitor_type = ARPHRD_ETHER; -+ -+ /* -+ * Register to receive inetaddr notifier changes. This will allow us to -+ * catch if the user changes the MAC address of the interface. -+ */ -+ register_netdevice_notifier(&acx_netdev_notifier); -+ -+ /* after register_netdev() userspace may start working with dev -+ * (in particular, on other CPUs), we only need to up the sem */ -+ /* acx_sem_unlock(adev); */ -+ -+ printk("acx "ACX_RELEASE": net device %s, driver compiled " -+ "against wireless extensions %d and Linux %s\n", -+ ndev->name, WIRELESS_EXT, UTS_RELEASE); -+ -+#if CMD_DISCOVERY -+ great_inquisitor(adev); -+#endif -+ -+ result = OK; -+ goto done; -+ -+ /* error paths: undo everything in reverse order... */ -+ -+fail_register_netdev: -+ -+ acxmem_s_delete_dma_regions(adev); -+ -+fail_reset: -+fail_hw_params: -+ free_netdev(ndev); -+fail_alloc_netdev: -+fail_unknown_chiptype: -+ -+ -+done: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_remove -+** -+** Shut device down (if not hot unplugged) -+** and deallocate PCI resources for the acx chip. -+** -+** pdev - ptr to PCI device structure containing info about pci configuration -+*/ -+static int __devexit -+acxmem_e_remove(struct platform_device *pdev) -+{ -+ struct acx_hardware_data *hwdata = pdev->dev.platform_data; -+ struct net_device *ndev; -+ acx_device_t *adev; -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ ndev = (struct net_device*) platform_get_drvdata(pdev); -+ if (!ndev) { -+ log(L_DEBUG, "%s: card is unused. Skipping any release code\n", -+ __func__); -+ goto end; -+ } -+ -+ adev = ndev2adev(ndev); -+ -+ /* If device wasn't hot unplugged... */ -+ if (adev_present(adev)) { -+ -+ acx_sem_lock(adev); -+ -+ /* disable both Tx and Rx to shut radio down properly */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); -+ -+#ifdef REDUNDANT -+ /* put the eCPU to sleep to save power -+ * Halting is not possible currently, -+ * since not supported by all firmware versions */ -+ acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0); -+#endif -+ acx_lock(adev, flags); -+ -+ /* disable power LED to save power :-) */ -+ log(L_INIT, "switching off power LED to save power\n"); -+ acxmem_l_power_led(adev, 0); -+ -+ /* stop our eCPU */ -+ if (IS_ACX111(adev)) { -+ /* FIXME: does this actually keep halting the eCPU? -+ * I don't think so... -+ */ -+ acxmem_l_reset_mac(adev); -+ } else { -+ u16 temp; -+ -+ /* halt eCPU */ -+ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; -+ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); -+ write_flush(adev); -+ } -+ -+ acx_unlock(adev, flags); -+ -+ acx_sem_unlock(adev); -+ } -+ -+ -+ /* -+ * Unregister the notifier chain -+ */ -+ unregister_netdevice_notifier(&acx_netdev_notifier); -+ -+ /* unregister the device to not let the kernel -+ * (e.g. ioctls) access a half-deconfigured device -+ * NB: this will cause acxmem_e_close() to be called, -+ * thus we shouldn't call it under sem! */ -+ log(L_INIT, "removing device %s\n", ndev->name); -+ unregister_netdev(ndev); -+ -+ /* unregister_netdev ensures that no references to us left. -+ * For paranoid reasons we continue to follow the rules */ -+ acx_sem_lock(adev); -+ -+ if (adev->dev_state_mask & ACX_STATE_IFACE_UP) { -+ acxmem_s_down(ndev); -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ } -+ -+ acx_proc_unregister_entries(ndev); -+ -+ acxmem_s_delete_dma_regions(adev); -+ -+ /* finally, clean up PCI bus state */ -+ if (adev->iobase) iounmap((void *)adev->iobase); -+ -+ acx_sem_unlock(adev); -+ -+ /* Free netdev (quite late, -+ * since otherwise we might get caught off-guard -+ * by a netdev timeout handler execution -+ * expecting to see a working dev...) */ -+ free_netdev(ndev); -+ -+ (void) hwdata->stop_hw(); -+ -+ printk ("e_remove done\n"); -+end: -+ FN_EXIT0; -+ -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** TODO: PM code needs to be fixed / debugged / tested. -+*/ -+#ifdef CONFIG_PM -+static int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+acxmem_e_suspend(struct platform_device *pdev, pm_message_t state) -+#else -+acxmem_e_suspend(struct device *pdev, u32 state) -+#endif -+{ -+ struct net_device *ndev = platform_get_drvdata(pdev); -+ acx_device_t *adev; -+ struct acx_hardware_data *hwdata; -+ -+ FN_ENTER; -+ printk("acx: suspend handler is experimental!\n"); -+ printk("sus: dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ goto end; -+ -+ adev = ndev2adev(ndev); -+ printk("sus: adev %p\n", adev); -+ -+ hwdata = adev->dev->platform_data; -+ -+ acx_sem_lock(adev); -+ -+ netif_device_detach(ndev); /* this one cannot sleep */ -+ acxmem_s_down(ndev); -+ /* down() does not set it to 0xffff, but here we really want that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ acxmem_s_delete_dma_regions(adev); -+ -+ /* -+ * Turn the ACX chip off. -+ */ -+ hwdata->stop_hw(); -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+ -+static void -+fw_resumer(struct work_struct *notused) -+{ -+ struct platform_device *pdev = resume_pdev; -+ struct net_device *ndev = platform_get_drvdata(pdev); -+ acx_device_t *adev; -+ struct acx_hardware_data *hwdata; -+ -+ printk("acx: resume handler is experimental!\n"); -+ printk("rsm: got dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ return; -+ -+ adev = ndev2adev(ndev); -+ printk("rsm: got adev %p\n", adev); -+ -+ acx_sem_lock(adev); -+ -+ hwdata = adev->dev->platform_data; -+ -+ /* -+ * Turn on the ACX. -+ */ -+ hwdata->start_hw(); -+ -+ acxmem_complete_hw_reset (adev); -+ -+ /* -+ * done by acx_s_set_defaults for initial startup -+ */ -+ acxmem_set_interrupt_mask(adev); -+ -+ printk ("rsm: bringing up interface\n"); -+ SET_BIT (adev->set_mask, GETSET_ALL); -+ acxmem_s_up(ndev); -+ printk("rsm: acx up done\n"); -+ -+ /* now even reload all card parameters as they were before suspend, -+ * and possibly be back in the network again already :-) -+ */ -+ /* - most settings updated in acxmem_s_up() -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) { -+ adev->set_mask = GETSET_ALL; -+ acx_s_update_card_settings(adev); -+ printk("rsm: settings updated\n"); -+ } -+ */ -+ netif_device_attach(ndev); -+ printk("rsm: device attached\n"); -+ -+ acx_sem_unlock(adev); -+} -+ -+DECLARE_WORK( fw_resume_work, fw_resumer ); -+ -+static int -+acxmem_e_resume(struct platform_device *pdev) -+{ -+ FN_ENTER; -+ -+ resume_pdev = pdev; -+ schedule_work( &fw_resume_work ); -+ -+ FN_EXIT0; -+ return OK; -+} -+#endif /* CONFIG_PM */ -+ -+ -+/*********************************************************************** -+** acxmem_s_up -+** -+** This function is called by acxmem_e_open (when ifconfig sets the device as up) -+** -+** Side effects: -+** - Enables on-card interrupt requests -+** - calls acx_s_start -+*/ -+ -+static void -+enable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask); -+ write_reg16(adev, IO_ACX_FEMR, 0x8000); -+ adev->irqs_active = 1; -+ FN_EXIT0; -+} -+ -+static void -+acxmem_s_up(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ enable_acx_irq(adev); -+ acx_unlock(adev, flags); -+ -+ /* acx fw < 1.9.3.e has a hardware timer, and older drivers -+ ** used to use it. But we don't do that anymore, our OS -+ ** has reliable software timers */ -+ init_timer(&adev->mgmt_timer); -+ adev->mgmt_timer.function = acx_i_timer; -+ adev->mgmt_timer.data = (unsigned long)adev; -+ -+ /* Need to set ACX_STATE_IFACE_UP first, or else -+ ** timer won't be started by acx_set_status() */ -+ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ /* actual scan cmd will happen in start() */ -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); break; -+ case ACX_MODE_3_AP: -+ case ACX_MODE_MONITOR: -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break; -+ } -+ -+ acx_s_start(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_down -+** -+** This disables the netdevice -+** -+** Side effects: -+** - disables on-card interrupt request -+*/ -+ -+static void -+disable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ -+ /* I guess mask is not 0xffff because acx100 won't signal -+ ** cmd completion then (needed for ifup). -+ ** Someone with acx100 please confirm */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ adev->irqs_active = 0; -+ FN_EXIT0; -+} -+ -+static void -+acxmem_s_down(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ /* Disable IRQs first, so that IRQs cannot race with us */ -+ /* then wait until interrupts have finished executing on other CPUs */ -+ acx_lock(adev, flags); -+ disable_acx_irq(adev); -+ synchronize_irq(adev->pdev->irq); -+ acx_unlock(adev, flags); -+ -+ /* we really don't want to have an asynchronous tasklet disturb us -+ ** after something vital for its job has been shut down, so -+ ** end all remaining work now. -+ ** -+ ** NB: carrier_off (done by set_status below) would lead to -+ ** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK(). -+ ** That's why we do FLUSH first. -+ ** -+ ** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK() -+ ** waits for acx_e_after_interrupt_task to complete if it is running -+ ** on another CPU, but acx_e_after_interrupt_task -+ ** will sleep on sem forever, because it is taken by us! -+ ** Work around that by temporary sem unlock. -+ ** This will fail miserably if we'll be hit by concurrent -+ ** iwconfig or something in between. TODO! */ -+ acx_sem_unlock(adev); -+ FLUSH_SCHEDULED_WORK(); -+ acx_sem_lock(adev); -+ -+ /* This is possible: -+ ** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task -> -+ ** -> set_status(ASSOCIATED) -> wake_queue() -+ ** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK -+ ** lock/unlock is just paranoia, maybe not needed */ -+ acx_lock(adev, flags); -+ acx_stop_queue(ndev, "on ifdown"); -+ acx_set_status(adev, ACX_STATUS_0_STOPPED); -+ acx_unlock(adev, flags); -+ -+ /* kernel/timer.c says it's illegal to del_timer_sync() -+ ** a timer which restarts itself. We guarantee this cannot -+ ** ever happen because acx_i_timer() never does this if -+ ** status is ACX_STATUS_0_STOPPED */ -+ del_timer_sync(&adev->mgmt_timer); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_open -+** -+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP -+** from clear to set. In other words: ifconfig up. -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxmem_e_open(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = OK; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ acx_init_task_scheduler(adev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */ -+ -+ /* request shared IRQ handler */ -+ if (request_irq(ndev->irq, acxmem_i_interrupt, SA_INTERRUPT, ndev->name, ndev)) { -+ printk("%s: request_irq FAILED\n", ndev->name); -+ result = -EAGAIN; -+ goto done; -+ } -+ set_irq_type (ndev->irq, IRQT_FALLING); -+ log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq); -+ -+ /* ifup device */ -+ acxmem_s_up(ndev); -+ -+ /* We don't currently have to do anything else. -+ * The setup of the MAC should be subsequently completed via -+ * the mlme commands. -+ * Higher layers know we're ready from dev->start==1 and -+ * dev->tbusy==0. Our rx path knows to pass up received/ -+ * frames because of dev->flags&IFF_UP is true. -+ */ -+done: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_close -+** -+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP -+** from set to clear. I.e. called by "ifconfig DEV down" -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxmem_e_close(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* ifdown device */ -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ if (netif_device_present(ndev)) { -+ acxmem_s_down(ndev); -+ } -+ -+ /* disable all IRQs, release shared IRQ handler */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ free_irq(ndev->irq, ndev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */ -+ -+ /* We currently don't have to do anything else. -+ * Higher layers know we're not ready from dev->start==0 and -+ * dev->tbusy==1. Our rx path knows to not pass up received -+ * frames because of dev->flags&IFF_UP is false. -+ */ -+ acx_sem_unlock(adev); -+ -+ log(L_INIT, "closed device\n"); -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_tx_timeout -+** -+** Called from network core. Must not sleep! -+*/ -+static void -+acxmem_i_tx_timeout(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ unsigned int tx_num_cleaned; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* clean processed tx descs, they may have been completely full */ -+ tx_num_cleaned = acxmem_l_clean_txdesc(adev); -+ -+ /* nothing cleaned, yet (almost) no free buffers available? -+ * --> clean all tx descs, no matter which status!! -+ * Note that I strongly suspect that doing emergency cleaning -+ * may confuse the firmware. This is a last ditch effort to get -+ * ANYTHING to work again... -+ * -+ * TODO: it's best to simply reset & reinit hw from scratch... -+ */ -+ if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) { -+ printk("%s: FAILED to free any of the many full tx buffers. " -+ "Switching to emergency freeing. " -+ "Please report!\n", ndev->name); -+ acxmem_l_clean_txdesc_emergency(adev); -+ } -+ -+ if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status)) -+ acx_wake_queue(ndev, "after tx timeout"); -+ -+ /* stall may have happened due to radio drift, so recalib radio */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ -+ /* do unimportant work last */ -+ printk("%s: tx timeout!\n", ndev->name); -+ adev->stats.tx_errors++; -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_set_multicast_list -+** FIXME: most likely needs refinement -+*/ -+static void -+acxmem_i_set_multicast_list(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* firmwares don't have allmulti capability, -+ * so just use promiscuous mode instead in this case. */ -+ if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) { -+ SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ /* let kernel know in case *we* needed to set promiscuous */ -+ ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI); -+ } else { -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI); -+ } -+ -+ /* cannot update card settings directly here, atomic context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_l_process_rxdesc -+** -+** Called directly and only from the IRQ handler -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_rxbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_rxbuffer(const acx_device_t *adev) -+{ -+ register const struct rxhostdesc *rxhostdesc; -+ int i; -+ /* no FN_ENTER here, we don't want that */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ if (unlikely(!rxhostdesc)) return; -+ for (i = 0; i < RX_CNT; i++) { -+ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) -+ printk("rx: buf %d full\n", i); -+ rxhostdesc++; -+ } -+} -+#endif -+ -+static void -+acxmem_l_process_rxdesc(acx_device_t *adev) -+{ -+ register rxhostdesc_t *hostdesc; -+ register rxdesc_t *rxdesc; -+ unsigned count, tail; -+ u32 addr; -+ u8 Ctl_8; -+ -+ FN_ENTER; -+ -+ if (unlikely(acx_debug & L_BUFR)) -+ log_rxbuffer(adev); -+ -+ /* First, have a loop to determine the first descriptor that's -+ * full, just in case there's a mismatch between our current -+ * rx_tail and the full descriptor we're supposed to handle. */ -+ tail = adev->rx_tail; -+ count = RX_CNT; -+ while (1) { -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ rxdesc = &adev->rxdesc_start[tail]; -+ /* advance tail regardless of outcome of the below test */ -+ tail = (tail + 1) % RX_CNT; -+ -+ /* -+ * Unlike the PCI interface, where the ACX can write directly to -+ * the host descriptors, on the slave memory interface we have to -+ * pull these. All we really need to do is check the Ctl_8 field -+ * in the rx descriptor on the ACX, which should be 0x11000000 if -+ * we should process it. -+ */ -+ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ if ((Ctl_8 & DESC_CTL_HOSTOWN) && -+ (Ctl_8 & DESC_CTL_ACXDONE)) -+ break; /* found it! */ -+ -+ if (unlikely(!--count)) /* hmm, no luck: all descs empty, bail out */ -+ goto end; -+ } -+ -+ /* now process descriptors, starting with the first we figured out */ -+ while (1) { -+ log(L_BUFR, "rx: tail=%u Ctl_8=%02X\n", tail, Ctl_8); -+ /* -+ * If the ACX has CTL_RECLAIM set on this descriptor there -+ * is no buffer associated; it just wants us to tell it to -+ * reclaim the memory. -+ */ -+ if (!(Ctl_8 & DESC_CTL_RECLAIM)) { -+ -+ /* -+ * slave interface - pull data now -+ */ -+ hostdesc->length = read_slavemem16 (adev, (u32) &(rxdesc->total_length)); -+ -+ /* -+ * hostdesc->data is an rxbuffer_t, which includes header information, -+ * but the length in the data packet doesn't. The header information -+ * takes up an additional 12 bytes, so add that to the length we copy. -+ */ -+ addr = read_slavemem32 (adev, (u32) &(rxdesc->ACXMemPtr)); -+ if (addr) { -+ /* -+ * How can &(rxdesc->ACXMemPtr) above ever be zero? Looks like we -+ * get that now and then - try to trap it for debug. -+ */ -+ if (addr & 0xffff0000) { -+ printk("rxdesc 0x%08x\n", (u32) rxdesc); -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("Bad access!"); -+ } -+ chaincopy_from_slavemem (adev, (u8 *) hostdesc->data, addr, -+ hostdesc->length + -+ (u32) &((rxbuffer_t *)0)->hdr_a3); -+ acx_l_process_rxbuf(adev, hostdesc->data); -+ } -+ } -+ else { -+ printk ("rx reclaim only!\n"); -+ } -+ -+ hostdesc->Status = 0; -+ -+ /* -+ * Let the ACX know we're done. -+ */ -+ CLEAR_BIT (Ctl_8, DESC_CTL_HOSTOWN); -+ SET_BIT (Ctl_8, DESC_CTL_HOSTDONE); -+ SET_BIT (Ctl_8, DESC_CTL_RECLAIM); -+ write_slavemem8 (adev, (u32) &rxdesc->Ctl_8, Ctl_8); -+ -+ /* -+ * Now tell the ACX we've finished with the receive buffer so -+ * it can finish the reclaim. -+ */ -+ write_reg16 (adev, IO_ACX_INT_TRIG, INT_TRIG_RXPRC); -+ -+ /* ok, descriptor is handled, now check the next descriptor */ -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ rxdesc = &adev->rxdesc_start[tail]; -+ -+ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ -+ /* if next descriptor is empty, then bail out */ -+ if (!(Ctl_8 & DESC_CTL_HOSTOWN) || !(Ctl_8 & DESC_CTL_ACXDONE)) -+ break; -+ -+ tail = (tail + 1) % RX_CNT; -+ } -+end: -+ adev->rx_tail = tail; -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_i_interrupt -+** -+** IRQ handler (atomic context, must not sleep, blah, blah) -+*/ -+ -+/* scan is complete. all frames now on the receive queue are valid */ -+#define INFO_SCAN_COMPLETE 0x0001 -+#define INFO_WEP_KEY_NOT_FOUND 0x0002 -+/* hw has been reset as the result of a watchdog timer timeout */ -+#define INFO_WATCH_DOG_RESET 0x0003 -+/* failed to send out NULL frame from PS mode notification to AP */ -+/* recommended action: try entering 802.11 PS mode again */ -+#define INFO_PS_FAIL 0x0004 -+/* encryption/decryption process on a packet failed */ -+#define INFO_IV_ICV_FAILURE 0x0005 -+ -+/* Info mailbox format: -+2 bytes: type -+2 bytes: status -+more bytes may follow -+ rumors say about status: -+ 0x0000 info available (set by hw) -+ 0x0001 information received (must be set by host) -+ 0x1000 info available, mailbox overflowed (messages lost) (set by hw) -+ but in practice we've seen: -+ 0x9000 when we did not set status to 0x0001 on prev message -+ 0x1001 when we did set it -+ 0x0000 was never seen -+ conclusion: this is really a bitfield: -+ 0x1000 is 'info available' bit -+ 'mailbox overflowed' bit is 0x8000, not 0x1000 -+ value of 0x0000 probably means that there are no messages at all -+ P.S. I dunno how in hell hw is supposed to notice that messages are lost - -+ it does NOT clear bit 0x0001, and this bit will probably stay forever set -+ after we set it once. Let's hope this will be fixed in firmware someday -+*/ -+ -+static void -+handle_info_irq(acx_device_t *adev) -+{ -+#if ACX_DEBUG -+ static const char * const info_type_msg[] = { -+ "(unknown)", -+ "scan complete", -+ "WEP key not found", -+ "internal watchdog reset was done", -+ "failed to send powersave (NULL frame) notification to AP", -+ "encrypt/decrypt on a packet has failed", -+ "TKIP tx keys disabled", -+ "TKIP rx keys disabled", -+ "TKIP rx: key ID not found", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "TKIP IV value exceeds thresh" -+ }; -+#endif -+ u32 info_type, info_status; -+ -+ info_type = read_slavemem32 (adev, (u32) adev->info_area); -+ -+ info_status = (info_type >> 16); -+ info_type = (u16)info_type; -+ -+ /* inform fw that we have read this info message */ -+ write_slavemem32(adev, (u32) adev->info_area, info_type | 0x00010000); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK); -+ write_flush(adev); -+ -+ log(L_CTL, "info_type:%04X info_status:%04X\n", -+ info_type, info_status); -+ -+ log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n", -+ info_status, info_type, -+ info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ? -+ 0 : info_type] -+ ); -+} -+ -+ -+static void -+log_unusual_irq(u16 irqtype) { -+ /* -+ if (!printk_ratelimit()) -+ return; -+ */ -+ -+ printk("acx: got"); -+ if (irqtype & HOST_INT_TX_XFER) { -+ printk(" Tx_Xfer"); -+ } -+ if (irqtype & HOST_INT_RX_COMPLETE) { -+ printk(" Rx_Complete"); -+ } -+ if (irqtype & HOST_INT_DTIM) { -+ printk(" DTIM"); -+ } -+ if (irqtype & HOST_INT_BEACON) { -+ printk(" Beacon"); -+ } -+ if (irqtype & HOST_INT_TIMER) { -+ log(L_IRQ, " Timer"); -+ } -+ if (irqtype & HOST_INT_KEY_NOT_FOUND) { -+ printk(" Key_Not_Found"); -+ } -+ if (irqtype & HOST_INT_IV_ICV_FAILURE) { -+ printk(" IV_ICV_Failure (crypto)"); -+ } -+ /* HOST_INT_CMD_COMPLETE */ -+ /* HOST_INT_INFO */ -+ if (irqtype & HOST_INT_OVERFLOW) { -+ printk(" Overflow"); -+ } -+ if (irqtype & HOST_INT_PROCESS_ERROR) { -+ printk(" Process_Error"); -+ } -+ /* HOST_INT_SCAN_COMPLETE */ -+ if (irqtype & HOST_INT_FCS_THRESHOLD) { -+ printk(" FCS_Threshold"); -+ } -+ if (irqtype & HOST_INT_UNKNOWN) { -+ printk(" Unknown"); -+ } -+ printk(" IRQ(s)\n"); -+} -+ -+ -+static void -+update_link_quality_led(acx_device_t *adev) -+{ -+ int qual; -+ -+ qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise); -+ if (qual > adev->brange_max_quality) -+ qual = adev->brange_max_quality; -+ -+ if (time_after(jiffies, adev->brange_time_last_state_change + -+ (HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) { -+ acxmem_l_power_led(adev, (adev->brange_last_state == 0)); -+ adev->brange_last_state ^= 1; /* toggle */ -+ adev->brange_time_last_state_change = jiffies; -+ } -+} -+ -+ -+#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* a la orinoco.c */ -+ -+static irqreturn_t -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+acxmem_i_interrupt(int irq, void *dev_id) -+#else -+acxmwm_i_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+#endif -+{ -+ acx_device_t *adev; -+ unsigned long flags; -+ unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY; -+ register u16 irqtype; -+ u16 unmasked; -+ -+ adev = ndev2adev((struct net_device*)dev_id); -+ -+ /* LOCKING: can just spin_lock() since IRQs are disabled anyway. -+ * I am paranoid */ -+ acx_lock(adev, flags); -+ -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ if (unlikely(0xffff == unmasked)) { -+ /* 0xffff value hints at missing hardware, -+ * so don't do anything. -+ * Not very clean, but other drivers do the same... */ -+ log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n"); -+ goto none; -+ } -+ -+ /* We will check only "interesting" IRQ types */ -+ irqtype = unmasked & ~adev->irq_mask; -+ if (!irqtype) { -+ /* We are on a shared IRQ line and it wasn't our IRQ */ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n", -+ unmasked, adev->irq_mask); -+ goto none; -+ } -+ -+ /* Done here because IRQ_NONEs taking three lines of log -+ ** drive me crazy */ -+ FN_ENTER; -+ -+#define IRQ_ITERATE 1 -+#if IRQ_ITERATE -+if (jiffies != adev->irq_last_jiffies) { -+ adev->irq_loops_this_jiffy = 0; -+ adev->irq_last_jiffies = jiffies; -+} -+ -+/* safety condition; we'll normally abort loop below -+ * in case no IRQ type occurred */ -+while (likely(--irqcount)) { -+#endif -+ /* ACK all IRQs ASAP */ -+ write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff); -+ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n", -+ unmasked, adev->irq_mask, irqtype); -+ -+ /* Handle most important IRQ types first */ -+ if (irqtype & HOST_INT_RX_DATA) { -+ log(L_IRQ, "got Rx_Data IRQ\n"); -+ acxmem_l_process_rxdesc(adev); -+ } -+ if (irqtype & HOST_INT_TX_COMPLETE) { -+ log(L_IRQ, "got Tx_Complete IRQ\n"); -+ /* don't clean up on each Tx complete, wait a bit -+ * unless we're going towards full, in which case -+ * we do it immediately, too (otherwise we might lockup -+ * with a full Tx buffer if we go into -+ * acxmem_l_clean_txdesc() at a time when we won't wakeup -+ * the net queue in there for some reason...) */ -+ if (adev->tx_free <= TX_START_CLEAN) { -+#if TX_CLEANUP_IN_SOFTIRQ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP); -+#else -+ acxmem_l_clean_txdesc(adev); -+#endif -+ } -+ } -+ -+ /* Less frequent ones */ -+ if (irqtype & (0 -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ | HOST_INT_SCAN_COMPLETE -+ )) { -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ log(L_IRQ, "got Command_Complete IRQ\n"); -+ /* save the state for the running issue_cmd() */ -+ SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE); -+ } -+ if (irqtype & HOST_INT_INFO) { -+ handle_info_irq(adev); -+ } -+ if (irqtype & HOST_INT_SCAN_COMPLETE) { -+ log(L_IRQ, "got Scan_Complete IRQ\n"); -+ /* need to do that in process context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN); -+ /* remember that fw is not scanning anymore */ -+ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); -+ } -+ } -+ -+ /* These we just log, but either they happen rarely -+ * or we keep them masked out */ -+ if (irqtype & (0 -+ /* | HOST_INT_RX_DATA */ -+ /* | HOST_INT_TX_COMPLETE */ -+ | HOST_INT_TX_XFER -+ | HOST_INT_RX_COMPLETE -+ | HOST_INT_DTIM -+ | HOST_INT_BEACON -+ | HOST_INT_TIMER -+ | HOST_INT_KEY_NOT_FOUND -+ | HOST_INT_IV_ICV_FAILURE -+ /* | HOST_INT_CMD_COMPLETE */ -+ /* | HOST_INT_INFO */ -+ | HOST_INT_OVERFLOW -+ | HOST_INT_PROCESS_ERROR -+ /* | HOST_INT_SCAN_COMPLETE */ -+ | HOST_INT_FCS_THRESHOLD -+ | HOST_INT_UNKNOWN -+ )) { -+ log_unusual_irq(irqtype); -+ } -+ -+#if IRQ_ITERATE -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ irqtype = unmasked & ~adev->irq_mask; -+ /* Bail out if no new IRQ bits or if all are masked out */ -+ if (!irqtype) -+ break; -+ -+ if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) { -+ printk(KERN_ERR "acx: too many interrupts per jiffy!\n"); -+ /* Looks like card floods us with IRQs! Try to stop that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ /* This will short-circuit all future attempts to handle IRQ. -+ * We cant do much more... */ -+ adev->irq_mask = 0; -+ break; -+ } -+} -+#endif -+ /* Routine to perform blink with range */ -+ if (unlikely(adev->led_power == 2)) -+ update_link_quality_led(adev); -+ -+/* handled: */ -+ /* write_flush(adev); - not needed, last op was read anyway */ -+ acx_unlock(adev, flags); -+ FN_EXIT0; -+ return IRQ_HANDLED; -+ -+none: -+ acx_unlock(adev, flags); -+ return IRQ_NONE; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_power_led -+*/ -+void -+acxmem_l_power_led(acx_device_t *adev, int enable) -+{ -+ u16 gpio_pled = IS_ACX111(adev) ? 0x0040 : 0x0800; -+ -+ /* A hack. Not moving message rate limiting to adev->xxx -+ * (it's only a debug message after all) */ -+ static int rate_limit = 0; -+ -+ if (rate_limit++ < 3) -+ log(L_IOCTL, "Please report in case toggling the power " -+ "LED doesn't work for your card!\n"); -+ if (enable) -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled); -+ else -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled); -+} -+ -+ -+/*********************************************************************** -+** Ioctls -+*/ -+ -+/*********************************************************************** -+*/ -+int -+acx111pci_ioctl_info( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+#if ACX_DEBUG > 1 -+ acx_device_t *adev = ndev2adev(ndev); -+ rxdesc_t *rxdesc; -+ txdesc_t *txdesc; -+ rxhostdesc_t *rxhostdesc; -+ txhostdesc_t *txhostdesc; -+ struct acx111_ie_memoryconfig memconf; -+ struct acx111_ie_queueconfig queueconf; -+ unsigned long flags; -+ int i; -+ char memmap[0x34]; -+ char rxconfig[0x8]; -+ char fcserror[0x8]; -+ char ratefallback[0x5]; -+ -+ if ( !(acx_debug & (L_IOCTL|L_DEBUG)) ) -+ return OK; -+ /* using printk() since we checked debug flag already */ -+ -+ acx_sem_lock(adev); -+ -+ if (!IS_ACX111(adev)) { -+ printk("acx111-specific function called " -+ "with non-acx111 chip, aborting\n"); -+ goto end_ok; -+ } -+ -+ /* get Acx111 Memory Configuration */ -+ memset(&memconf, 0, sizeof(memconf)); -+ /* BTW, fails with 12 (Write only) error code. -+ ** Retained for easy testing of issue_cmd error handling :) */ -+ printk ("Interrogating queue config\n"); -+ acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG); -+ printk ("done with queue config\n"); -+ -+ /* get Acx111 Queue Configuration */ -+ memset(&queueconf, 0, sizeof(queueconf)); -+ printk ("Interrogating mem config options\n"); -+ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); -+ printk ("done with mem config options\n"); -+ -+ /* get Acx111 Memory Map */ -+ memset(memmap, 0, sizeof(memmap)); -+ printk ("Interrogating mem map\n"); -+ acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP); -+ printk ("done with mem map\n"); -+ -+ /* get Acx111 Rx Config */ -+ memset(rxconfig, 0, sizeof(rxconfig)); -+ printk ("Interrogating rxconfig\n"); -+ acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG); -+ printk ("done with queue rxconfig\n"); -+ -+ /* get Acx111 fcs error count */ -+ memset(fcserror, 0, sizeof(fcserror)); -+ printk ("Interrogating fcs err count\n"); -+ acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT); -+ printk ("done with err count\n"); -+ -+ /* get Acx111 rate fallback */ -+ memset(ratefallback, 0, sizeof(ratefallback)); -+ printk ("Interrogating rate fallback\n"); -+ acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK); -+ printk ("done with rate fallback\n"); -+ -+ /* force occurrence of a beacon interrupt */ -+ /* TODO: comment why is this necessary */ -+ write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON); -+ -+ /* dump Acx111 Mem Configuration */ -+ printk("dump mem config:\n" -+ "data read: %d, struct size: %d\n" -+ "Number of stations: %1X\n" -+ "Memory block size: %1X\n" -+ "tx/rx memory block allocation: %1X\n" -+ "count rx: %X / tx: %X queues\n" -+ "options %1X\n" -+ "fragmentation %1X\n" -+ "Rx Queue 1 Count Descriptors: %X\n" -+ "Rx Queue 1 Host Memory Start: %X\n" -+ "Tx Queue 1 Count Descriptors: %X\n" -+ "Tx Queue 1 Attributes: %X\n", -+ memconf.len, (int) sizeof(memconf), -+ memconf.no_of_stations, -+ memconf.memory_block_size, -+ memconf.tx_rx_memory_block_allocation, -+ memconf.count_rx_queues, memconf.count_tx_queues, -+ memconf.options, -+ memconf.fragmentation, -+ memconf.rx_queue1_count_descs, -+ acx2cpu(memconf.rx_queue1_host_rx_start), -+ memconf.tx_queue1_count_descs, -+ memconf.tx_queue1_attributes); -+ -+ /* dump Acx111 Queue Configuration */ -+ printk("dump queue head:\n" -+ "data read: %d, struct size: %d\n" -+ "tx_memory_block_address (from card): %X\n" -+ "rx_memory_block_address (from card): %X\n" -+ "rx1_queue address (from card): %X\n" -+ "tx1_queue address (from card): %X\n" -+ "tx1_queue attributes (from card): %X\n", -+ queueconf.len, (int) sizeof(queueconf), -+ queueconf.tx_memory_block_address, -+ queueconf.rx_memory_block_address, -+ queueconf.rx1_queue_address, -+ queueconf.tx1_queue_address, -+ queueconf.tx1_attributes); -+ -+ /* dump Acx111 Mem Map */ -+ printk("dump mem map:\n" -+ "data read: %d, struct size: %d\n" -+ "Code start: %X\n" -+ "Code end: %X\n" -+ "WEP default key start: %X\n" -+ "WEP default key end: %X\n" -+ "STA table start: %X\n" -+ "STA table end: %X\n" -+ "Packet template start: %X\n" -+ "Packet template end: %X\n" -+ "Queue memory start: %X\n" -+ "Queue memory end: %X\n" -+ "Packet memory pool start: %X\n" -+ "Packet memory pool end: %X\n" -+ "iobase: %p\n" -+ "iobase2: %p\n", -+ *((u16 *)&memmap[0x02]), (int) sizeof(memmap), -+ *((u32 *)&memmap[0x04]), -+ *((u32 *)&memmap[0x08]), -+ *((u32 *)&memmap[0x0C]), -+ *((u32 *)&memmap[0x10]), -+ *((u32 *)&memmap[0x14]), -+ *((u32 *)&memmap[0x18]), -+ *((u32 *)&memmap[0x1C]), -+ *((u32 *)&memmap[0x20]), -+ *((u32 *)&memmap[0x24]), -+ *((u32 *)&memmap[0x28]), -+ *((u32 *)&memmap[0x2C]), -+ *((u32 *)&memmap[0x30]), -+ adev->iobase, -+ adev->iobase2); -+ -+ /* dump Acx111 Rx Config */ -+ printk("dump rx config:\n" -+ "data read: %d, struct size: %d\n" -+ "rx config: %X\n" -+ "rx filter config: %X\n", -+ *((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig), -+ *((u16 *)&rxconfig[0x04]), -+ *((u16 *)&rxconfig[0x06])); -+ -+ /* dump Acx111 fcs error */ -+ printk("dump fcserror:\n" -+ "data read: %d, struct size: %d\n" -+ "fcserrors: %X\n", -+ *((u16 *)&fcserror[0x02]), (int) sizeof(fcserror), -+ *((u32 *)&fcserror[0x04])); -+ -+ /* dump Acx111 rate fallback */ -+ printk("dump rate fallback:\n" -+ "data read: %d, struct size: %d\n" -+ "ratefallback: %X\n", -+ *((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback), -+ *((u8 *)&ratefallback[0x04])); -+ -+ /* protect against IRQ */ -+ acx_lock(adev, flags); -+ -+ /* dump acx111 internal rx descriptor ring buffer */ -+ rxdesc = adev->rxdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump internal rxdesc %d:\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n" -+ "RxStatus (dynamic) 0x%X\n" -+ "Mod/Pre (dynamic) 0x%X\n", -+ i, -+ rxdesc, -+ acx2cpu(rxdesc->pNextDesc), -+ acx2cpu(rxdesc->ACXMemPtr), -+ rxdesc->Ctl_8, -+ rxdesc->rate, -+ rxdesc->error, -+ rxdesc->SNR); -+ rxdesc++; -+ } -+ -+ /* dump host rx descriptor ring buffer */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump host rxdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ rxhostdesc, -+ acx2cpu(rxhostdesc->data_phy), -+ rxhostdesc->data_offset, -+ le16_to_cpu(rxhostdesc->Ctl_16), -+ le16_to_cpu(rxhostdesc->length), -+ acx2cpu(rxhostdesc->desc_phy_next), -+ rxhostdesc->Status); -+ rxhostdesc++; -+ } -+ -+ /* dump acx111 internal tx descriptor ring buffer */ -+ txdesc = adev->txdesc_start; -+ -+ /* loop over complete transmit pool */ -+ if (txdesc) for (i = 0; i < TX_CNT; i++) { -+ printk("\ndump internal txdesc %d:\n" -+ "size 0x%X\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "host mem pointer (dynamic) 0x%X\n" -+ "length (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "CTL2 (dynamic) 0x%X\n" -+ "Status (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n", -+ i, -+ (int) sizeof(struct txdesc), -+ txdesc, -+ acx2cpu(txdesc->pNextDesc), -+ acx2cpu(txdesc->AcxMemPtr), -+ acx2cpu(txdesc->HostMemPtr), -+ le16_to_cpu(txdesc->total_length), -+ txdesc->Ctl_8, -+ txdesc->Ctl2_8, txdesc->error, -+ txdesc->u.r1.rate); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ -+ /* dump host tx descriptor ring buffer */ -+ -+ txhostdesc = adev->txhostdesc_start; -+ -+ /* loop over complete host send pool */ -+ if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) { -+ printk("\ndump host txdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ txhostdesc, -+ acx2cpu(txhostdesc->data_phy), -+ txhostdesc->data_offset, -+ le16_to_cpu(txhostdesc->Ctl_16), -+ le16_to_cpu(txhostdesc->length), -+ acx2cpu(txhostdesc->desc_phy_next), -+ le32_to_cpu(txhostdesc->Status)); -+ txhostdesc++; -+ } -+ -+ /* write_reg16(adev, 0xb4, 0x4); */ -+ -+ acx_unlock(adev, flags); -+end_ok: -+ -+ acx_sem_unlock(adev); -+#endif /* ACX_DEBUG */ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100mem_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ u16 gpio_old; -+ -+ if (!IS_ACX100(adev)) { -+ /* WARNING!!! -+ * Removing this check *might* damage -+ * hardware, since we're tweaking GPIOs here after all!!! -+ * You've been warned... -+ * WARNING!!! */ -+ printk("acx: sorry, setting bias level for non-acx100 " -+ "is not supported yet\n"); -+ return OK; -+ } -+ -+ if (*extra > 7) { -+ printk("acx: invalid bias parameter, range is 0-7\n"); -+ return -EINVAL; -+ } -+ -+ acx_sem_lock(adev); -+ -+ /* Need to lock accesses to [IO_ACX_GPIO_OUT]: -+ * IRQ handler uses it to update LED */ -+ acx_lock(adev, flags); -+ gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT); -+ write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8)); -+ acx_unlock(adev, flags); -+ -+ log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old); -+ printk("%s: PHY power amplifier bias: old:%d, new:%d\n", -+ ndev->name, -+ (gpio_old & 0x0700) >> 8, (unsigned char)*extra); -+ -+ acx_sem_unlock(adev); -+ -+ return OK; -+} -+ -+/*************************************************************** -+** acxmem_l_alloc_tx -+** Actually returns a txdesc_t* ptr -+** -+** FIXME: in case of fragments, should allocate multiple descrs -+** after figuring out how many we need and whether we still have -+** sufficiently many. -+*/ -+tx_t* -+acxmem_l_alloc_tx(acx_device_t *adev) -+{ -+ struct txdesc *txdesc; -+ unsigned head; -+ u8 ctl8; -+ static int txattempts = 0; -+ -+ FN_ENTER; -+ -+ if (unlikely(!adev->tx_free)) { -+ printk("acx: BUG: no free txdesc left\n"); -+ /* -+ * Probably the ACX ignored a transmit attempt and now there's a packet -+ * sitting in the queue we think should be transmitting but the ACX doesn't -+ * know about. -+ * On the first pass, send the ACX a TxProc interrupt to try moving -+ * things along, and if that doesn't work (ie, we get called again) completely -+ * flush the transmit queue. -+ */ -+ if (txattempts < 10) { -+ txattempts++; -+ printk ("acx: trying to wake up ACX\n"); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); -+ write_flush(adev); } -+ else { -+ txattempts = 0; -+ printk ("acx: flushing transmit queue.\n"); -+ acxmem_l_clean_txdesc_emergency (adev); -+ } -+ txdesc = NULL; -+ goto end; -+ } -+ -+ /* -+ * Make a quick check to see if there is transmit buffer space on -+ * the ACX. This can't guarantee there is enough space for the packet -+ * since we don't yet know how big it is, but it will prevent at least some -+ * annoyances. -+ */ -+ if (!adev->acx_txbuf_blocks_free) { -+ txdesc = NULL; -+ goto end; -+ } -+ -+ head = adev->tx_head; -+ /* -+ * txdesc points to ACX memory -+ */ -+ txdesc = get_txdesc(adev, head); -+ ctl8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ -+ /* -+ * If we don't own the buffer (HOSTOWN) it is certainly not free; however, -+ * we may have previously thought we had enough memory to send -+ * a packet, allocated the buffer then gave up when we found not enough -+ * transmit buffer space on the ACX. In that case, HOSTOWN and -+ * ACXDONE will both be set. -+ */ -+ if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_HOSTOWN))) { -+ /* whoops, descr at current index is not free, so probably -+ * ring buffer already full */ -+ printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find " -+ "free txdesc\n", head, ctl8); -+ txdesc = NULL; -+ goto end; -+ } -+ -+ /* Needed in case txdesc won't be eventually submitted for tx */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_ACXDONE_HOSTOWN); -+ -+ adev->tx_free--; -+ log(L_BUFT, "tx: got desc %u, %u remain\n", -+ head, adev->tx_free); -+ /* Keep a few free descs between head and tail of tx ring. -+ ** It is not absolutely needed, just feels safer */ -+ if (adev->tx_free < TX_STOP_QUEUE) { -+ log(L_BUF, "stop queue (%u tx desc left)\n", -+ adev->tx_free); -+ acx_stop_queue(adev->ndev, NULL); -+ } -+ -+ /* returning current descriptor, so advance to next free one */ -+ adev->tx_head = (head + 1) % TX_CNT; -+end: -+ FN_EXIT0; -+ -+ return (tx_t*)txdesc; -+} -+ -+ -+/*************************************************************** -+** acxmem_l_dealloc_tx -+** Clears out a previously allocatedvoid acxmem_l_dealloc_tx(tx_t *tx_opaque); -+ transmit descriptor. The ACX -+** can get confused if we skip transmit descriptors in the queue, -+** so when we don't need a descriptor return it to its original -+** state and move the queue head pointer back. -+** -+*/ -+void -+acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque) -+{ -+ /* -+ * txdesc is the address of the descriptor on the ACX. -+ */ -+ txdesc_t *txdesc = (txdesc_t*)tx_opaque; -+ txdesc_t tmptxdesc; -+ int index; -+ -+ memset (&tmptxdesc, 0, sizeof(tmptxdesc)); -+ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; -+ tmptxdesc.u.r1.rate = 0x0a; -+ -+ /* -+ * Clear out all of the transmit descriptor except for the next pointer -+ */ -+ copy_to_slavemem (adev, (u32) &(txdesc->HostMemPtr), -+ (u8 *) &(tmptxdesc.HostMemPtr), -+ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc)); -+ -+ /* -+ * This is only called immediately after we've allocated, so we should -+ * be able to set the head back to this descriptor. -+ */ -+ index = ((u8*) txdesc - (u8*)adev->txdesc_start) / adev->txdesc_size; -+ printk ("acx_dealloc: moving head from %d to %d\n", adev->tx_head, index); -+ adev->tx_head = index; -+} -+ -+ -+/*********************************************************************** -+*/ -+void* -+acxmem_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) -+{ -+ return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_tx_data -+** -+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). -+** Can be called from acx_i_start_xmit (data frames from net core). -+** -+** FIXME: in case of fragments, should loop over the number of -+** pre-allocated tx descrs, properly setting up transfer data and -+** CTL_xxx flags according to fragment number. -+*/ -+void -+acxmem_update_queue_indicator (acx_device_t *adev, int txqueue) -+{ -+#ifdef USING_MORE_THAN_ONE_TRANSMIT_QUEUE -+ u32 indicator; -+ unsigned long flags; -+ int count; -+ -+ /* -+ * Can't handle an interrupt while we're fiddling with the ACX's lock, -+ * according to TI. The ACX is supposed to hold fw_lock for at most -+ * 500ns. -+ */ -+ local_irq_save (flags); -+ -+ /* -+ * Wait for ACX to release the lock (at most 500ns). -+ */ -+ count = 0; -+ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) -+ && (count++ < 50)) { -+ ndelay (10); -+ } -+ if (count < 50) { -+ -+ /* -+ * Take out the host lock - anything non-zero will work, so don't worry about -+ * be/le -+ */ -+ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 1); -+ -+ /* -+ * Avoid a race condition -+ */ -+ count = 0; -+ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) -+ && (count++ < 50)) { -+ ndelay (10); -+ } -+ -+ if (count < 50) { -+ /* -+ * Mark the queue active -+ */ -+ indicator = read_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator)); -+ indicator |= cpu_to_le32 (1 << txqueue); -+ write_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator), indicator); -+ } -+ -+ /* -+ * Release the host lock -+ */ -+ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 0); -+ -+ } -+ -+ /* -+ * Restore interrupts -+ */ -+ local_irq_restore (flags); -+#endif -+} -+ -+void -+acxmem_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len) -+{ -+ /* -+ * txdesc is the address on the ACX -+ */ -+ txdesc_t *txdesc = (txdesc_t*)tx_opaque; -+ txhostdesc_t *hostdesc1, *hostdesc2; -+ client_t *clt; -+ u16 rate_cur; -+ u8 Ctl_8, Ctl2_8; -+ u32 addr; -+ -+ FN_ENTER; -+ /* fw doesn't tx such packets anyhow */ -+ if (unlikely(len < WLAN_HDR_A3_LEN)) -+ goto end; -+ -+ hostdesc1 = get_txhostdesc(adev, txdesc); -+ /* modify flag status in separate variable to be able to write it back -+ * in one big swoop later (also in order to have less device memory -+ * accesses) */ -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */ -+ -+ hostdesc2 = hostdesc1 + 1; -+ -+ /* DON'T simply set Ctl field to 0 here globally, -+ * it needs to maintain a consistent flag status (those are state flags!!), -+ * otherwise it may lead to severe disruption. Only set or reset particular -+ * flags at the exact moment this is needed... */ -+ -+ /* let chip do RTS/CTS handshaking before sending -+ * in case packet size exceeds threshold */ -+ if (len > adev->rts_threshold) -+ SET_BIT(Ctl2_8, DESC_CTL2_RTS); -+ else -+ CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS); -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1); -+ break; -+ case ACX_MODE_2_STA: -+ clt = adev->ap_client; -+ break; -+#if 0 -+/* testing was done on acx111: */ -+ case ACX_MODE_MONITOR: -+ SET_BIT(Ctl2_8, 0 -+/* sends CTS to self before packet */ -+ + DESC_CTL2_SEQ /* don't increase sequence field */ -+/* not working (looks like good fcs is still added) */ -+ + DESC_CTL2_FCS /* don't add the FCS */ -+/* not tested */ -+ + DESC_CTL2_MORE_FRAG -+/* not tested */ -+ + DESC_CTL2_RETRY /* don't increase retry field */ -+/* not tested */ -+ + DESC_CTL2_POWER /* don't increase power mgmt. field */ -+/* no effect */ -+ + DESC_CTL2_WEP /* encrypt this frame */ -+/* not tested */ -+ + DESC_CTL2_DUR /* don't increase duration field */ -+ ); -+ /* fallthrough */ -+#endif -+ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ -+ clt = NULL; -+ break; -+ } -+ -+ rate_cur = clt ? clt->rate_cur : adev->rate_bcast; -+ if (unlikely(!rate_cur)) { -+ printk("acx: driver bug! bad ratemask\n"); -+ goto end; -+ } -+ -+ /* used in tx cleanup routine for auto rate and accounting: */ -+ put_txcr(adev, txdesc, clt, rate_cur); -+ -+ write_slavemem16 (adev, (u32) &(txdesc->total_length), cpu_to_le16(len)); -+ hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN); -+ if (IS_ACX111(adev)) { -+ /* note that if !txdesc->do_auto, txrate->cur -+ ** has only one nonzero bit */ -+ txdesc->u.r2.rate111 = cpu_to_le16( -+ rate_cur -+ /* WARNING: I was never able to make it work with prism54 AP. -+ ** It was falling down to 1Mbit where shortpre is not applicable, -+ ** and not working at all at "5,11 basic rates only" setting. -+ ** I even didn't see tx packets in radio packet capture. -+ ** Disabled for now --vda */ -+ /*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */ -+ ); -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ /* should add this to rate111 above as necessary */ -+ | (clt->pbcc511 ? RATE111_PBCC511 : 0) -+#endif -+ hostdesc1->length = cpu_to_le16(len); -+ } else { /* ACX100 */ -+ u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100; -+ write_slavemem8 (adev, (u32) &(txdesc->u.r1.rate), rate_100); -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ if (clt->pbcc511) { -+ if (n == RATE100_5 || n == RATE100_11) -+ n |= RATE100_PBCC511; -+ } -+ -+ if (clt->shortpre && (clt->cur != RATE111_1)) -+ SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */ -+#endif -+ /* set autodma and reclaim and 1st mpdu */ -+ SET_BIT(Ctl_8, DESC_CTL_FIRSTFRAG); -+ -+#if ACX_FRAGMENTATION -+ /* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */ -+#endif -+ hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN); -+ -+ /* -+ * Since we're not using autodma copy the packet data to the acx now. -+ * Even host descriptors point to the packet header, and the odd indexed -+ * descriptor following points to the packet data. -+ * -+ * The first step is to find free memory in the ACX transmit buffers. -+ * They don't necessarily map one to one with the transmit queue entries, -+ * so search through them starting just after the last one used. -+ */ -+ addr = allocate_acx_txbuf_space (adev, len); -+ if (addr) { -+ chaincopy_to_slavemem (adev, addr, hostdesc1->data, len); -+ } -+ else { -+ /* -+ * Bummer. We thought we might have enough room in the transmit -+ * buffers to send this packet, but it turns out we don't. alloc_tx -+ * has already marked this transmit descriptor as HOSTOWN and ACXDONE, -+ * which means the ACX will hang when it gets to this descriptor unless -+ * we do something about it. Having a bubble in the transmit queue just -+ * doesn't seem to work, so we have to reset this transmit queue entry's -+ * state to its original value and back up our head pointer to point -+ * back to this entry. -+ */ -+ hostdesc1->length = 0; -+ hostdesc2->length = 0; -+ write_slavemem16 (adev, (u32) &(txdesc->total_length), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG); -+ adev->tx_head = ((u8*) txdesc - (u8*) adev->txdesc_start) / adev->txdesc_size; -+ goto end; -+ } -+ /* -+ * Tell the ACX where the packet is. -+ */ -+ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), addr); -+ -+ } -+ /* don't need to clean ack/rts statistics here, already -+ * done on descr cleanup */ -+ -+ /* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors -+ * are now owned by the acx100; do this as LAST operation */ -+ CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN); -+ /* flush writes before we release hostdesc to the adapter here */ -+ //wmb(); -+ -+ /* write back modified flags */ -+ /* -+ * At this point Ctl_8 should just be FIRSTFRAG -+ */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl2_8),Ctl2_8); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), Ctl_8); -+ /* unused: txdesc->tx_time = cpu_to_le32(jiffies); */ -+ -+ /* -+ * Update the queue indicator to say there's data on the first queue. -+ */ -+ acxmem_update_queue_indicator (adev, 0); -+ -+ /* flush writes before we tell the adapter that it's its turn now */ -+ mmiowb(); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); -+ write_flush(adev); -+ -+ /* log the packet content AFTER sending it, -+ * in order to not delay sending any further than absolutely needed -+ * Do separate logs for acx100/111 to have human-readable rates */ -+ if (unlikely(acx_debug & (L_XFER|L_DATA))) { -+ u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc; -+ if (IS_ACX111(adev)) -+ printk("tx: pkt (%s): len %d " -+ "rate %04X%s status %u\n", -+ acx_get_packet_type_string(le16_to_cpu(fc)), len, -+ le16_to_cpu(txdesc->u.r2.rate111), -+ (le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "", -+ adev->status); -+ else -+ printk("tx: pkt (%s): len %d rate %03u%s status %u\n", -+ acx_get_packet_type_string(fc), len, -+ read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)), -+ (Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "", -+ adev->status); -+ -+ if (acx_debug & L_DATA) { -+ printk("tx: 802.11 [%d]: ", len); -+ acx_dump_bytes(hostdesc1->data, len); -+ } -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_l_clean_txdesc -+** -+** This function resets the txdescs' status when the ACX100 -+** signals the TX done IRQ (txdescs have been processed), starting with -+** the pool index of the descriptor which we would use next, -+** in order to make sure that we can be as fast as possible -+** in filling new txdescs. -+** Everytime we get called we know where the next packet to be cleaned is. -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_txbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_txbuffer(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ u8 Ctl_8; -+ -+ /* no FN_ENTER here, we don't want that */ -+ /* no locks here, since it's entirely non-critical code */ -+ txdesc = adev->txdesc_start; -+ if (unlikely(!txdesc)) return; -+ printk("tx: desc->Ctl8's:"); -+ for (i = 0; i < TX_CNT; i++) { -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ printk(" %02X", Ctl_8); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ printk("\n"); -+} -+#endif -+ -+ -+static void -+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger) -+{ -+ const char *err = "unknown error"; -+ -+ /* hmm, should we handle this as a mask -+ * of *several* bits? -+ * For now I think only caring about -+ * individual bits is ok... */ -+ switch (error) { -+ case 0x01: -+ err = "no Tx due to error in other fragment"; -+ adev->wstats.discard.fragment++; -+ break; -+ case 0x02: -+ err = "Tx aborted"; -+ adev->stats.tx_aborted_errors++; -+ break; -+ case 0x04: -+ err = "Tx desc wrong parameters"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x08: -+ err = "WEP key not found"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x10: -+ err = "MSDU lifetime timeout? - try changing " -+ "'iwconfig retry lifetime XXX'"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x20: -+ err = "excessive Tx retries due to either distance " -+ "too high or unable to Tx or Tx frame error - " -+ "try changing 'iwconfig txpower XXX' or " -+ "'sens'itivity or 'retry'"; -+ adev->wstats.discard.retries++; -+ /* Tx error 0x20 also seems to occur on -+ * overheating, so I'm not sure whether we -+ * actually want to do aggressive radio recalibration, -+ * since people maybe won't notice then that their hardware -+ * is slowly getting cooked... -+ * Or is it still a safe long distance from utter -+ * radio non-functionality despite many radio recalibs -+ * to final destructive overheating of the hardware? -+ * In this case we really should do recalib here... -+ * I guess the only way to find out is to do a -+ * potentially fatal self-experiment :-\ -+ * Or maybe only recalib in case we're using Tx -+ * rate auto (on errors switching to lower speed -+ * --> less heat?) or 802.11 power save mode? -+ * -+ * ok, just do it. */ -+ if (++adev->retry_errors_msg_ratelimit % 4 == 0) { -+ if (adev->retry_errors_msg_ratelimit <= 20) { -+ printk("%s: several excessive Tx " -+ "retry errors occurred, attempting " -+ "to recalibrate radio. Radio " -+ "drift might be caused by increasing " -+ "card temperature, please check the card " -+ "before it's too late!\n", -+ adev->ndev->name); -+ if (adev->retry_errors_msg_ratelimit == 20) -+ printk("disabling above message\n"); -+ } -+ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ } -+ break; -+ case 0x40: -+ err = "Tx buffer overflow"; -+ adev->stats.tx_fifo_errors++; -+ break; -+ case 0x80: -+ err = "DMA error"; -+ adev->wstats.discard.misc++; -+ break; -+ } -+ adev->stats.tx_errors++; -+ if (adev->stats.tx_errors <= 20) -+ printk("%s: tx error 0x%02X, buf %02u! (%s)\n", -+ adev->ndev->name, error, finger, err); -+ else -+ printk("%s: tx error 0x%02X, buf %02u!\n", -+ adev->ndev->name, error, finger); -+} -+ -+ -+unsigned int -+acxmem_l_clean_txdesc(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ unsigned finger; -+ int num_cleaned; -+ u16 r111; -+ u8 error, ack_failures, rts_failures, rts_ok, r100, Ctl_8; -+ u32 acxmem; -+ txdesc_t tmptxdesc; -+ -+ FN_ENTER; -+ -+ /* -+ * Set up a template descriptor for re-initialization. The only -+ * things that get set are Ctl_8 and the rate, and the rate defaults -+ * to 1Mbps. -+ */ -+ memset (&tmptxdesc, 0, sizeof (tmptxdesc)); -+ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; -+ tmptxdesc.u.r1.rate = 0x0a; -+ -+ if (unlikely(acx_debug & L_DEBUG)) -+ log_txbuffer(adev); -+ -+ log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail); -+ -+ /* We know first descr which is not free yet. We advance it as far -+ ** as we see correct bits set in following descs (if next desc -+ ** is NOT free, we shouldn't advance at all). We know that in -+ ** front of tx_tail may be "holes" with isolated free descs. -+ ** We will catch up when all intermediate descs will be freed also */ -+ -+ finger = adev->tx_tail; -+ num_cleaned = 0; -+ while (likely(finger != adev->tx_head)) { -+ txdesc = get_txdesc(adev, finger); -+ -+ /* If we allocated txdesc on tx path but then decided -+ ** to NOT use it, then it will be left as a free "bubble" -+ ** in the "allocated for tx" part of the ring. -+ ** We may meet it on the next ring pass here. */ -+ -+ /* stop if not marked as "tx finished" and "host owned" */ -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ if ((Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN) -+ != DESC_CTL_ACXDONE_HOSTOWN) { -+ if (unlikely(!num_cleaned)) { /* maybe remove completely */ -+ log(L_BUFT, "clean_txdesc: tail isn't free. " -+ "tail:%d head:%d\n", -+ adev->tx_tail, adev->tx_head); -+ } -+ break; -+ } -+ -+ /* remember desc values... */ -+ error = read_slavemem8 (adev, (u32) &(txdesc->error)); -+ ack_failures = read_slavemem8 (adev, (u32) &(txdesc->ack_failures)); -+ rts_failures = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures)); -+ rts_ok = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok)); -+ r100 = read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)); -+ r111 = le16_to_cpu(read_slavemem16 (adev, (u32) &(txdesc->u.r2.rate111))); -+ -+ /* need to check for certain error conditions before we -+ * clean the descriptor: we still need valid descr data here */ -+ if (unlikely(0x30 & error)) { -+ /* only send IWEVTXDROP in case of retry or lifetime exceeded; -+ * all other errors mean we screwed up locally */ -+ union iwreq_data wrqu; -+ wlan_hdr_t *hdr; -+ txhostdesc_t *hostdesc; -+ -+ hostdesc = get_txhostdesc(adev, txdesc); -+ hdr = (wlan_hdr_t *)hostdesc->data; -+ MAC_COPY(wrqu.addr.sa_data, hdr->a1); -+ wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL); -+ } -+ -+ /* -+ * Free up the transmit data buffers -+ */ -+ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (acxmem) { -+ reclaim_acx_txbuf_space (adev, acxmem); -+ } -+ -+ /* ...and free the desc by clearing all the fields -+ except the next pointer */ -+ copy_to_slavemem (adev, -+ (u32) &(txdesc->HostMemPtr), -+ (u8 *) &(tmptxdesc.HostMemPtr), -+ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc) -+ ); -+ -+ adev->tx_free++; -+ num_cleaned++; -+ -+ if ((adev->tx_free >= TX_START_QUEUE) -+ && (adev->status == ACX_STATUS_4_ASSOCIATED) -+ && (acx_queue_stopped(adev->ndev)) -+ ) { -+ log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n", -+ adev->tx_free); -+ acx_wake_queue(adev->ndev, NULL); -+ } -+ -+ /* do error checking, rate handling and logging -+ * AFTER having done the work, it's faster */ -+ -+ /* do rate handling */ -+ if (adev->rate_auto) { -+ struct client *clt = get_txc(adev, txdesc); -+ if (clt) { -+ u16 cur = get_txr(adev, txdesc); -+ if (clt->rate_cur == cur) { -+ acx_l_handle_txrate_auto(adev, clt, -+ cur, /* intended rate */ -+ r100, r111, /* actually used rate */ -+ (error & 0x30), /* was there an error? */ -+ TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free); -+ } -+ } -+ } -+ -+ if (unlikely(error)) -+ handle_tx_error(adev, error, finger); -+ -+ if (IS_ACX111(adev)) -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n", -+ finger, ack_failures, rts_failures, rts_ok, r111); -+ else -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n", -+ finger, ack_failures, rts_failures, rts_ok, r100); -+ -+ /* update pointer for descr to be cleaned next */ -+ finger = (finger + 1) % TX_CNT; -+ } -+ -+ /* remember last position */ -+ adev->tx_tail = finger; -+/* end: */ -+ FN_EXIT1(num_cleaned); -+ return num_cleaned; -+} -+ -+/* clean *all* Tx descriptors, and regardless of their previous state. -+ * Used for brute-force reset handling. */ -+void -+acxmem_l_clean_txdesc_emergency(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ u32 acxmem; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc = get_txdesc(adev, i); -+ -+ /* free it */ -+ write_slavemem8 (adev, (u32) &(txdesc->ack_failures), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->error), 0); -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN); -+ -+ /* -+ * Clean up the memory allocated on the ACX for this transmit descriptor. -+ */ -+ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (acxmem) { -+ reclaim_acx_txbuf_space (adev, acxmem); -+ } -+ -+ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), 0); -+ } -+ -+ adev->tx_free = TX_CNT; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxmem_s_create_tx_host_desc_queue -+*/ -+ -+static void* -+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg) -+{ -+ void *ptr; -+ ptr = kmalloc (size, GFP_KERNEL); -+ /* -+ * The ACX can't use the physical address, so we'll have to fake it -+ * later and it might be handy to have the virtual address. -+ */ -+ *phy = (dma_addr_t) NULL; -+ -+ if (ptr) { -+ log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n", -+ msg, (int)size, ptr, (unsigned long long)*phy); -+ memset(ptr, 0, size); -+ return ptr; -+ } -+ printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n", -+ msg, (int)size); -+ return NULL; -+} -+ -+ -+/* -+ * In the generic slave memory access mode, most of the stuff in -+ * the txhostdesc_t is unused. It's only here because the rest of -+ * the ACX driver expects it to be since the PCI version uses indirect -+ * host memory organization with DMA. Since we're not using DMA the -+ * only use we have for the host descriptors is to store the packets -+ * on the way out. -+ */ -+static int -+acxmem_s_create_tx_host_desc_queue(acx_device_t *adev) -+{ -+ txhostdesc_t *hostdesc; -+ u8 *txbuf; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate TX buffer */ -+ adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS; -+ -+ adev->txbuf_start = allocate(adev, adev->txbuf_area_size, -+ &adev->txbuf_startphy, "txbuf_start"); -+ if (!adev->txbuf_start) -+ goto fail; -+ -+ /* allocate the TX host descriptor queue pool */ -+ adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc); -+ -+ adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size, -+ &adev->txhostdesc_startphy, "txhostdesc_start"); -+ if (!adev->txhostdesc_start) -+ goto fail; -+ -+ /* check for proper alignment of TX host descriptor pool */ -+ if ((long) adev->txhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ hostdesc = adev->txhostdesc_start; -+ txbuf = adev->txbuf_start; -+ -+#if 0 -+/* Each tx buffer is accessed by hardware via -+** txdesc -> txhostdesc(s) -> txbuffer(s). -+** We use only one txhostdesc per txdesc, but it looks like -+** acx111 is buggy: it accesses second txhostdesc -+** (via hostdesc.desc_phy_next field) even if -+** txdesc->length == hostdesc->length and thus -+** entire packet was placed into first txhostdesc. -+** Due to this bug acx111 hangs unless second txhostdesc -+** has le16_to_cpu(hostdesc.length) = 3 (or larger) -+** Storing NULL into hostdesc.desc_phy_next -+** doesn't seem to help. -+** -+** Update: although it worked on Xterasys XN-2522g -+** with len=3 trick, WG311v2 is even more bogus, doesn't work. -+** Keeping this code (#ifdef'ed out) for documentational purposes. -+*/ -+ for (i = 0; i < TX_CNT*2; i++) { -+ hostdesc_phy += sizeof(*hostdesc); -+ if (!(i & 1)) { -+ hostdesc->data_phy = cpu2acx(txbuf_phy); -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); -+ /* hostdesc->length = ... */ -+ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); -+ hostdesc->pNext = ptr2acx(NULL); -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ hostdesc->data = txbuf; -+ -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS; -+ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS; -+ } else { -+ /* hostdesc->data_phy = ... */ -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ /* hostdesc->Ctl_16 = ... */ -+ hostdesc->length = cpu_to_le16(3); /* bug workaround */ -+ /* hostdesc->desc_phy_next = ... */ -+ /* hostdesc->pNext = ... */ -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ /* hostdesc->data = ... */ -+ } -+ hostdesc++; -+ } -+#endif -+/* We initialize two hostdescs so that they point to adjacent -+** memory areas. Thus txbuf is really just a contiguous memory area */ -+ for (i = 0; i < TX_CNT*2; i++) { -+ /* ->data is a non-hardware field: */ -+ hostdesc->data = txbuf; -+ -+ if (!(i & 1)) { -+ txbuf += WLAN_HDR_A3_LEN; -+ } else { -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; -+ } -+ hostdesc++; -+ } -+ hostdesc--; -+ -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_tx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxmem_s_create_rx_host_desc_queue -+*/ -+/* the whole size of a data buffer (header plus data body) -+ * plus 32 bytes safety offset at the end */ -+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32) -+ -+static int -+acxmem_s_create_rx_host_desc_queue(acx_device_t *adev) -+{ -+ rxhostdesc_t *hostdesc; -+ rxbuffer_t *rxbuf; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate the RX host descriptor queue pool */ -+ adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc); -+ -+ adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size, -+ &adev->rxhostdesc_startphy, "rxhostdesc_start"); -+ if (!adev->rxhostdesc_start) -+ goto fail; -+ -+ /* check for proper alignment of RX host descriptor pool */ -+ if ((long) adev->rxhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ /* allocate Rx buffer pool which will be used by the acx -+ * to store the whole content of the received frames in it */ -+ adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE; -+ -+ adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size, -+ &adev->rxbuf_startphy, "rxbuf_start"); -+ if (!adev->rxbuf_start) -+ goto fail; -+ -+ rxbuf = adev->rxbuf_start; -+ hostdesc = adev->rxhostdesc_start; -+ -+ /* don't make any popular C programming pointer arithmetic mistakes -+ * here, otherwise I'll kill you... -+ * (and don't dare asking me why I'm warning you about that...) */ -+ for (i = 0; i < RX_CNT; i++) { -+ hostdesc->data = rxbuf; -+ hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE); -+ rxbuf++; -+ hostdesc++; -+ } -+ hostdesc--; -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_rx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxmem_s_create_hostdesc_queues -+*/ -+int -+acxmem_s_create_hostdesc_queues(acx_device_t *adev) -+{ -+ int result; -+ result = acxmem_s_create_tx_host_desc_queue(adev); -+ if (OK != result) return result; -+ result = acxmem_s_create_rx_host_desc_queue(adev); -+ return result; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_tx_desc_queue -+*/ -+static void -+acxmem_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start) -+{ -+ txdesc_t *txdesc; -+ u32 clr; -+ int i; -+ -+ FN_ENTER; -+ -+ if (IS_ACX100(adev)) -+ adev->txdesc_size = sizeof(*txdesc); -+ else -+ /* the acx111 txdesc is 4 bytes larger */ -+ adev->txdesc_size = sizeof(*txdesc) + 4; -+ -+ /* -+ * This refers to an ACX address, not one of ours -+ */ -+ adev->txdesc_start = (txdesc_t *) tx_queue_start; -+ -+ log(L_DEBUG, "adev->txdesc_start=%p\n", -+ adev->txdesc_start); -+ -+ adev->tx_free = TX_CNT; -+ /* done by memset: adev->tx_head = 0; */ -+ /* done by memset: adev->tx_tail = 0; */ -+ txdesc = adev->txdesc_start; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111 has a preinitialized Tx buffer! */ -+ /* loop over whole send pool */ -+ /* FIXME: do we have to do the hostmemptr stuff here?? */ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; -+ /* reserve two (hdr desc and payload desc) */ -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ } else { -+ /* ACX100 Tx buffer needs to be initialized by us */ -+ /* clear whole send pool. sizeof is safe here (we are acx100) */ -+ -+ /* -+ * adev->txdesc_start refers to device memory, so we can't write -+ * directly to it. -+ */ -+ clr = (u32) adev->txdesc_start; -+ while (clr < (u32) adev->txdesc_start + (TX_CNT * sizeof(*txdesc))) { -+ write_slavemem32 (adev, clr, 0); -+ clr += 4; -+ } -+ -+ /* loop over whole send pool */ -+ for (i = 0; i < TX_CNT; i++) { -+ log(L_DEBUG, "configure card tx descriptor: 0x%p, " -+ "size: 0x%X\n", txdesc, adev->txdesc_size); -+ -+ /* initialise ctl */ -+ /* -+ * No auto DMA here -+ */ -+ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), -+ (u8) (DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG)); -+ /* done by memset(0): txdesc->Ctl2_8 = 0; */ -+ -+ /* point to next txdesc */ -+ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), -+ (u32) cpu_to_le32 ((u8 *) txdesc + adev->txdesc_size)); -+ -+ /* go to the next one */ -+ /* ++ is safe here (we are acx100) */ -+ txdesc++; -+ } -+ /* go back to the last one */ -+ txdesc--; -+ /* and point to the first making it a ring buffer */ -+ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), -+ (u32) cpu_to_le32 (tx_queue_start)); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_rx_desc_queue -+*/ -+static void -+acxmem_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start) -+{ -+ rxdesc_t *rxdesc; -+ u32 mem_offs; -+ int i; -+ -+ FN_ENTER; -+ -+ /* done by memset: adev->rx_tail = 0; */ -+ -+ /* ACX111 doesn't need any further config: preconfigures itself. -+ * Simply print ring buffer for debugging */ -+ if (IS_ACX111(adev)) { -+ /* rxdesc_start already set here */ -+ -+ adev->rxdesc_start = (rxdesc_t *) rx_queue_start; -+ -+ rxdesc = adev->rxdesc_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc); -+ rxdesc = adev->rxdesc_start = (rxdesc_t *) -+ acx2cpu(rxdesc->pNextDesc); -+ } -+ } else { -+ /* we didn't pre-calculate rxdesc_start in case of ACX100 */ -+ /* rxdesc_start should be right AFTER Tx pool */ -+ adev->rxdesc_start = (rxdesc_t *) -+ ((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t))); -+ /* NB: sizeof(txdesc_t) above is valid because we know -+ ** we are in if (acx100) block. Beware of cut-n-pasting elsewhere! -+ ** acx111's txdesc is larger! */ -+ -+ mem_offs = (u32) adev->rxdesc_start; -+ while (mem_offs < (u32) adev->rxdesc_start + (RX_CNT * sizeof (*rxdesc))) { -+ write_slavemem32 (adev, mem_offs, 0); -+ mem_offs += 4; -+ } -+ -+ /* loop over whole receive pool */ -+ rxdesc = adev->rxdesc_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc); -+ /* point to next rxdesc */ -+ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), -+ (u32) cpu_to_le32 ((u8 *) rxdesc + sizeof(*rxdesc))); -+ /* go to the next one */ -+ rxdesc++; -+ } -+ /* go to the last one */ -+ rxdesc--; -+ -+ /* and point to the first making it a ring buffer */ -+ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), -+ (u32) cpu_to_le32 (rx_queue_start)); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxmem_create_desc_queues -+*/ -+void -+acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start) -+{ -+ u32 *p; -+ int i; -+ -+ acxmem_create_tx_desc_queue(adev, tx_queue_start); -+ acxmem_create_rx_desc_queue(adev, rx_queue_start); -+ p = (u32 *) adev->acx_queue_indicator; -+ for (i = 0; i < 4; i++) { -+ write_slavemem32 (adev, (u32) p, 0); -+ p++; -+ } -+} -+ -+ -+/*************************************************************** -+** acxmem_s_proc_diag_output -+*/ -+char* -+acxmem_s_proc_diag_output(char *p, acx_device_t *adev) -+{ -+ const char *rtl, *thd, *ttl; -+ txdesc_t *txdesc; -+ u8 Ctl_8; -+ rxdesc_t *rxdesc; -+ int i; -+ u32 tmp; -+ txdesc_t txd; -+ u8 buf[0x200]; -+ int j, k; -+ -+ FN_ENTER; -+ -+#if DUMP_MEM_DURING_DIAG > 0 -+ dump_acxmem (adev, 0, 0x10000); -+ panic ("dump finished"); -+#endif -+ -+ p += sprintf(p, "** Rx buf **\n"); -+ rxdesc = adev->rxdesc_start; -+ if (rxdesc) for (i = 0; i < RX_CNT; i++) { -+ rtl = (i == adev->rx_tail) ? " [tail]" : ""; -+ Ctl_8 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); -+ if (Ctl_8 & DESC_CTL_HOSTOWN) -+ p += sprintf(p, "%02u (%02x) FULL%s\n", i, Ctl_8, rtl); -+ else -+ p += sprintf(p, "%02u (%02x) empty%s\n", i, Ctl_8, rtl); -+ rxdesc++; -+ } -+ p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free, -+ acx_queue_stopped(adev->ndev) ? "STOPPED" : "running"); -+ -+ p += sprintf(p, "** Tx buf %d blocks total, %d available, free list head %04x\n", -+ adev->acx_txbuf_numblocks, adev->acx_txbuf_blocks_free, adev->acx_txbuf_free); -+ txdesc = adev->txdesc_start; -+ if (txdesc) { -+ for (i = 0; i < TX_CNT; i++) { -+ thd = (i == adev->tx_head) ? " [head]" : ""; -+ ttl = (i == adev->tx_tail) ? " [tail]" : ""; -+ copy_from_slavemem (adev, (u8 *) &txd, (u32) txdesc, sizeof (txd)); -+ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); -+ if (Ctl_8 & DESC_CTL_ACXDONE) -+ p += sprintf(p, "%02u ready to free (%02X)%s%s", i, Ctl_8, thd, ttl); -+ else if (Ctl_8 & DESC_CTL_HOSTOWN) -+ p += sprintf(p, "%02u available (%02X)%s%s", i, Ctl_8, thd, ttl); -+ else -+ p += sprintf(p, "%02u busy (%02X)%s%s", i, Ctl_8, thd, ttl); -+ tmp = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); -+ if (tmp) { -+ p += sprintf (p, " %04x", tmp); -+ while ((tmp = read_slavemem32 (adev, (u32) tmp)) != 0x02000000) { -+ tmp <<= 5; -+ p += sprintf (p, " %04x", tmp); -+ } -+ } -+ p += sprintf (p, "\n"); -+ p += sprintf (p, " %04x: %04x %04x %04x %04x %04x %04x %04x %04x %04x %04x %02x %02x %02x %02x\n" -+ "%02x %02x %02x %02x %04x\n", -+ (u32) txdesc, -+ txd.pNextDesc.v, txd.HostMemPtr.v, txd.AcxMemPtr.v, txd.tx_time, -+ txd.total_length, txd.Reserved, -+ txd.dummy[0], txd.dummy[1], txd.dummy[2], txd.dummy[3], -+ txd.Ctl_8, txd.Ctl2_8, txd.error, txd.ack_failures, -+ txd.u.rts.rts_failures, txd.u.rts.rts_ok, txd.u.r1.rate, txd.u.r1.queue_ctrl, -+ txd.queue_info -+ ); -+ if (txd.AcxMemPtr.v) { -+ copy_from_slavemem (adev, buf, txd.AcxMemPtr.v, sizeof (buf)); -+ for (j = 0; (j < txd.total_length) && (j<(sizeof(buf)-4)); j+=16) { -+ p += sprintf (p, " "); -+ for (k = 0; (k < 16) && (j+k < txd.total_length); k++) { -+ p += sprintf (p, " %02x", buf[j+k+4]); -+ } -+ p += sprintf (p, "\n"); -+ } -+ } -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ } -+ -+ p += sprintf(p, -+ "\n" -+ "** Generic slave data **\n" -+ "irq_mask 0x%04x irq_status 0x%04x irq on acx 0x%04x\n" -+ "txbuf_start 0x%p, txbuf_area_size %u\n" -+ "txdesc_size %u, txdesc_start 0x%p\n" -+ "txhostdesc_start 0x%p, txhostdesc_area_size %u\n" -+ "txbuf start 0x%04x, txbuf size %d\n" -+ "rxdesc_start 0x%p\n" -+ "rxhostdesc_start 0x%p, rxhostdesc_area_size %u\n" -+ "rxbuf_start 0x%p, rxbuf_area_size %u\n", -+ adev->irq_mask, adev->irq_status, read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES), -+ adev->txbuf_start, adev->txbuf_area_size, -+ adev->txdesc_size, adev->txdesc_start, -+ adev->txhostdesc_start, adev->txhostdesc_area_size, -+ adev->acx_txbuf_start, adev->acx_txbuf_numblocks * adev->memblocksize, -+ adev->rxdesc_start, -+ adev->rxhostdesc_start, adev->rxhostdesc_area_size, -+ adev->rxbuf_start, adev->rxbuf_area_size); -+ FN_EXIT0; -+ return p; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxmem_proc_eeprom_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ int i; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < 0x400; i++) { -+ acxmem_read_eeprom_byte(adev, i, p++); -+ } -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+*/ -+void -+acxmem_set_interrupt_mask(acx_device_t *adev) -+{ -+ if (IS_ACX111(adev)) { -+ adev->irq_mask = (u16) ~(0 -+ | HOST_INT_RX_DATA -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ /* | HOST_INT_RX_COMPLETE */ -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ | HOST_INT_IV_ICV_FAILURE -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ | HOST_INT_OVERFLOW -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ | HOST_INT_FCS_THRESHOLD -+ | HOST_INT_UNKNOWN -+ ); -+ /* Or else acx100 won't signal cmd completion, right? */ -+ adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */ -+ } else { -+ adev->irq_mask = (u16) ~(0 -+ | HOST_INT_RX_DATA -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ /* | HOST_INT_RX_COMPLETE */ -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ /* | HOST_INT_IV_ICV_FAILURE */ -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ /* | HOST_INT_OVERFLOW */ -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ /* | HOST_INT_FCS_THRESHOLD */ -+ /* | HOST_INT_BEACON_MISSED */ -+ ); -+ adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */ -+ } -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm) -+{ -+ struct acx111_ie_tx_level tx_level; -+ -+ /* since it can be assumed that at least the Maxim radio has a -+ * maximum power output of 20dBm and since it also can be -+ * assumed that these values drive the DAC responsible for -+ * setting the linear Tx level, I'd guess that these values -+ * should be the corresponding linear values for a dBm value, -+ * in other words: calculate the values from that formula: -+ * Y [dBm] = 10 * log (X [mW]) -+ * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm) -+ * and you're done... -+ * Hopefully that's ok, but you never know if we're actually -+ * right... (especially since Windows XP doesn't seem to show -+ * actual Tx dBm values :-P) */ -+ -+ /* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the -+ * values are EXACTLY mW!!! Not sure about RFMD and others, -+ * though... */ -+ static const u8 dbm2val_maxim[21] = { -+ 63, 63, 63, 62, -+ 61, 61, 60, 60, -+ 59, 58, 57, 55, -+ 53, 50, 47, 43, -+ 38, 31, 23, 13, -+ 0 -+ }; -+ static const u8 dbm2val_rfmd[21] = { -+ 0, 0, 0, 1, -+ 2, 2, 3, 3, -+ 4, 5, 6, 8, -+ 10, 13, 16, 20, -+ 25, 32, 41, 50, -+ 63 -+ }; -+ const u8 *table; -+ -+ switch (adev->radio_type) { -+ case RADIO_MAXIM_0D: -+ table = &dbm2val_maxim[0]; -+ break; -+ case RADIO_RFMD_11: -+ case RADIO_RALINK_15: -+ table = &dbm2val_rfmd[0]; -+ break; -+ default: -+ printk("%s: unknown/unsupported radio type, " -+ "cannot modify tx power level yet!\n", -+ adev->ndev->name); -+ return NOT_OK; -+ } -+ /* -+ * The hx4700 EEPROM, at least, only supports 1 power setting. The configure -+ * routine matches the PA bias with the gain, so just use its default value. -+ * The values are: 0x2b for the gain and 0x03 for the PA bias. The firmware -+ * writes the gain level to the Tx gain control DAC and the PA bias to the Maxim -+ * radio's PA bias register. The firmware limits itself to 0 - 64 when writing to the -+ * gain control DAC. -+ * -+ * Physically between the ACX and the radio, higher Tx gain control DAC values result -+ * in less power output; 0 volts to the Maxim radio results in the highest output power -+ * level, which I'm assuming matches up with 0 in the Tx Gain DAC register. -+ * -+ * Although there is only the 1 power setting, one of the radio firmware functions adjusts -+ * the transmit power level up and down. That function is called by the ACX FIQ handler -+ * under certain conditions. -+ */ -+ tx_level.level = 1; -+ //return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); -+ -+ printk("%s: changing radio power level to %u dBm (%u)\n", -+ adev->ndev->name, level_dbm, table[level_dbm]); -+ acxmem_s_write_phy_reg(adev, 0x11, table[level_dbm]); -+ -+ return 0; -+} -+ -+ -+static struct platform_driver -+acxmem_drv_id = { -+ .driver = { -+ .name = "acx-mem", -+ }, -+ .probe = acxmem_e_probe, -+ .remove = __devexit_p(acxmem_e_remove), -+#ifdef CONFIG_PM -+ .suspend = acxmem_e_suspend, -+ .resume = acxmem_e_resume -+#endif /* CONFIG_PM */ -+}; -+ -+ -+/*********************************************************************** -+** acxmem_e_init_module -+** -+** Module initialization routine, called once at module load time -+*/ -+int __init -+acxmem_e_init_module(void) -+{ -+ int res; -+ -+ FN_ENTER; -+ -+#if (ACX_IO_WIDTH==32) -+ printk("acx: compiled to use 32bit I/O access. " -+ "I/O timing issues might occur, such as " -+ "non-working firmware upload. Report them\n"); -+#else -+ printk("acx: compiled to use 16bit I/O access only " -+ "(compatibility mode)\n"); -+#endif -+ -+#ifdef __LITTLE_ENDIAN -+#define ENDIANNESS_STRING "running on a little-endian CPU\n" -+#else -+#define ENDIANNESS_STRING "running on a BIG-ENDIAN CPU\n" -+#endif -+ log(L_INIT, -+ ENDIANNESS_STRING -+ "PCI module " ACX_RELEASE " initialized, " -+ "waiting for cards to probe...\n" -+ ); -+ -+ res = platform_driver_register (&acxmem_drv_id); -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxmem_e_cleanup_module -+** -+** Called at module unload time. This is our last chance to -+** clean up after ourselves. -+*/ -+void __exit -+acxmem_e_cleanup_module(void) -+{ -+ FN_ENTER; -+ -+ printk ("cleanup_module\n"); -+ platform_driver_unregister( &acxmem_drv_id ); -+ -+ FN_EXIT0; -+} -+ -+void acxmem_e_release(struct device *dev) { -+} -+ -+MODULE_AUTHOR( "Todd Blumer " ); -+MODULE_DESCRIPTION( "ACX Slave Memory Driver" ); -+MODULE_LICENSE( "GPL" ); -+ -Index: linux-2.6.23/drivers/net/wireless/acx/pci.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/pci.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,4234 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+#define ACX_PCI 1 -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+ -+/* Linux 2.6.18+ uses */ -+#ifndef UTS_RELEASE -+#include -+#endif -+ -+#include /* required for Lx 2.6.8 ?? */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx.h" -+ -+ -+/*********************************************************************** -+*/ -+#define PCI_TYPE (PCI_USES_MEM | PCI_ADDR0 | PCI_NO_ACPI_WAKE) -+#define PCI_ACX100_REGION1 0x01 -+#define PCI_ACX100_REGION1_SIZE 0x1000 /* Memory size - 4K bytes */ -+#define PCI_ACX100_REGION2 0x02 -+#define PCI_ACX100_REGION2_SIZE 0x10000 /* Memory size - 64K bytes */ -+ -+#define PCI_ACX111_REGION1 0x00 -+#define PCI_ACX111_REGION1_SIZE 0x2000 /* Memory size - 8K bytes */ -+#define PCI_ACX111_REGION2 0x01 -+#define PCI_ACX111_REGION2_SIZE 0x20000 /* Memory size - 128K bytes */ -+ -+/* Texas Instruments Vendor ID */ -+#define PCI_VENDOR_ID_TI 0x104c -+ -+/* ACX100 22Mb/s WLAN controller */ -+#define PCI_DEVICE_ID_TI_TNETW1100A 0x8400 -+#define PCI_DEVICE_ID_TI_TNETW1100B 0x8401 -+ -+/* ACX111 54Mb/s WLAN controller */ -+#define PCI_DEVICE_ID_TI_TNETW1130 0x9066 -+ -+/* PCI Class & Sub-Class code, Network-'Other controller' */ -+#define PCI_CLASS_NETWORK_OTHERS 0x0280 -+ -+#define CARD_EEPROM_ID_SIZE 6 -+ -+#ifndef PCI_D0 -+/* From include/linux/pci.h */ -+#define PCI_D0 0 -+#define PCI_D1 1 -+#define PCI_D2 2 -+#define PCI_D3hot 3 -+#define PCI_D3cold 4 -+#define PCI_UNKNOWN 5 -+#define PCI_POWER_ERROR -1 -+#endif -+ -+ -+/*********************************************************************** -+*/ -+static void acxpci_i_tx_timeout(struct net_device *ndev); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+static irqreturn_t acxpci_i_interrupt(int irq, void *dev_id); -+#else -+static irqreturn_t acxpci_i_interrupt(int irq, void *dev_id, struct pt_regs *regs); -+#endif -+static void acxpci_i_set_multicast_list(struct net_device *ndev); -+ -+static int acxpci_e_open(struct net_device *ndev); -+static int acxpci_e_close(struct net_device *ndev); -+static void acxpci_s_up(struct net_device *ndev); -+static void acxpci_s_down(struct net_device *ndev); -+ -+ -+/*********************************************************************** -+** Register access -+*/ -+ -+/* Pick one */ -+/* #define INLINE_IO static */ -+#define INLINE_IO static inline -+ -+INLINE_IO u32 -+read_reg32(acx_device_t *adev, unsigned int offset) -+{ -+#if ACX_IO_WIDTH == 32 -+ return readl((u8 *)adev->iobase + adev->io[offset]); -+#else -+ return readw((u8 *)adev->iobase + adev->io[offset]) -+ + (readw((u8 *)adev->iobase + adev->io[offset] + 2) << 16); -+#endif -+} -+ -+INLINE_IO u16 -+read_reg16(acx_device_t *adev, unsigned int offset) -+{ -+ return readw((u8 *)adev->iobase + adev->io[offset]); -+} -+ -+INLINE_IO u8 -+read_reg8(acx_device_t *adev, unsigned int offset) -+{ -+ return readb((u8 *)adev->iobase + adev->io[offset]); -+} -+ -+INLINE_IO void -+write_reg32(acx_device_t *adev, unsigned int offset, u32 val) -+{ -+#if ACX_IO_WIDTH == 32 -+ writel(val, (u8 *)adev->iobase + adev->io[offset]); -+#else -+ writew(val & 0xffff, (u8 *)adev->iobase + adev->io[offset]); -+ writew(val >> 16, (u8 *)adev->iobase + adev->io[offset] + 2); -+#endif -+} -+ -+INLINE_IO void -+write_reg16(acx_device_t *adev, unsigned int offset, u16 val) -+{ -+ writew(val, (u8 *)adev->iobase + adev->io[offset]); -+} -+ -+INLINE_IO void -+write_reg8(acx_device_t *adev, unsigned int offset, u8 val) -+{ -+ writeb(val, (u8 *)adev->iobase + adev->io[offset]); -+} -+ -+/* Handle PCI posting properly: -+ * Make sure that writes reach the adapter in case they require to be executed -+ * *before* the next write, by reading a random (and safely accessible) register. -+ * This call has to be made if there is no read following (which would flush the data -+ * to the adapter), yet the written data has to reach the adapter immediately. */ -+INLINE_IO void -+write_flush(acx_device_t *adev) -+{ -+ /* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */ -+ /* faster version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should also be safe): */ -+ readb(adev->iobase); -+} -+ -+INLINE_IO int -+adev_present(acx_device_t *adev) -+{ -+ /* fast version (accesses the first register, IO_ACX_SOFT_RESET, -+ * which should be safe): */ -+ return readl(adev->iobase) != 0xffffffff; -+} -+ -+ -+/*********************************************************************** -+*/ -+static inline txdesc_t* -+get_txdesc(acx_device_t *adev, int index) -+{ -+ return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size); -+} -+ -+static inline txdesc_t* -+advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc) -+{ -+ return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size); -+} -+ -+static txhostdesc_t* -+get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return &adev->txhostdesc_start[index*2]; -+} -+ -+static inline client_t* -+get_txc(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return NULL; -+ } -+ return adev->txc[index]; -+} -+ -+static inline u16 -+get_txr(acx_device_t *adev, txdesc_t* txdesc) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ index /= adev->txdesc_size; -+ return adev->txr[index]; -+} -+ -+static inline void -+put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111) -+{ -+ int index = (u8*)txdesc - (u8*)adev->txdesc_start; -+ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ index /= adev->txdesc_size; -+ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { -+ printk("bad txdesc ptr %p\n", txdesc); -+ return; -+ } -+ adev->txc[index] = c; -+ adev->txr[index] = r111; -+} -+ -+ -+/*********************************************************************** -+** EEPROM and PHY read/write helpers -+*/ -+/*********************************************************************** -+** acxpci_read_eeprom_byte -+** -+** Function called to read an octet in the EEPROM. -+** -+** This function is used by acxpci_e_probe to check if the -+** connected card is a legal one or not. -+** -+** Arguments: -+** adev ptr to acx_device structure -+** addr address to read in the EEPROM -+** charbuf ptr to a char. This is where the read octet -+** will be stored -+*/ -+int -+acxpci_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf) -+{ -+ int result; -+ int count; -+ -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for EEPROM read\n", -+ adev->ndev->name); -+ result = NOT_OK; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ *charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA); -+ log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf); -+ result = OK; -+ -+fail: -+ return result; -+} -+ -+ -+/*********************************************************************** -+** We don't lock hw accesses here since we never r/w eeprom in IRQ -+** Note: this function sleeps only because of GFP_KERNEL alloc -+*/ -+#ifdef UNUSED -+int -+acxpci_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf) -+{ -+ u8 *data_verify = NULL; -+ unsigned long flags; -+ int count, i; -+ int result = NOT_OK; -+ u16 gpio_orig; -+ -+ printk("acx: WARNING! I would write to EEPROM now. " -+ "Since I really DON'T want to unless you know " -+ "what you're doing (THIS CODE WILL PROBABLY " -+ "NOT WORK YET!), I will abort that now. And " -+ "definitely make sure to make a " -+ "/proc/driver/acx_wlan0_eeprom backup copy first!!! " -+ "(the EEPROM content includes the PCI config header!! " -+ "If you kill important stuff, then you WILL " -+ "get in trouble and people DID get in trouble already)\n"); -+ return OK; -+ -+ FN_ENTER; -+ -+ data_verify = kmalloc(len, GFP_KERNEL); -+ if (!data_verify) { -+ goto end; -+ } -+ -+ /* first we need to enable the OE (EEPROM Output Enable) GPIO line -+ * to be able to write to the EEPROM. -+ * NOTE: an EEPROM writing success has been reported, -+ * but you probably have to modify GPIO_OUT, too, -+ * and you probably need to activate a different GPIO -+ * line instead! */ -+ gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE); -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1); -+ write_flush(adev); -+ -+ /* ok, now start writing the data out */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i)); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 1); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("WARNING, DANGER!!! " -+ "Timeout waiting for EEPROM write\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ } -+ -+ /* disable EEPROM writing */ -+ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig); -+ write_flush(adev); -+ -+ /* now start a verification run */ -+ for (i = 0; i < len; i++) { -+ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); -+ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { -+ if (unlikely(!--count)) { -+ printk("timeout waiting for EEPROM read\n"); -+ goto end; -+ } -+ cpu_relax(); -+ } -+ -+ data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA); -+ } -+ -+ if (0 == memcmp(charbuf, data_verify, len)) -+ result = OK; /* read data matches, success */ -+ -+end: -+ kfree(data_verify); -+ FN_EXIT1(result); -+ return result; -+} -+#endif /* UNUSED */ -+ -+ -+/*********************************************************************** -+** acxpci_s_read_phy_reg -+** -+** Messing with rx/tx disabling and enabling here -+** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic -+*/ -+int -+acxpci_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) -+{ -+ int result = NOT_OK; -+ int count; -+ -+ FN_ENTER; -+ -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 2); -+ -+ count = 0xffff; -+ while (read_reg32(adev, IO_ACX_PHY_CTL)) { -+ /* scheduling away instead of CPU burning loop -+ * doesn't seem to work here at all: -+ * awful delay, sometimes also failure. -+ * Doesn't matter anyway (only small delay). */ -+ if (unlikely(!--count)) { -+ printk("%s: timeout waiting for phy read\n", -+ adev->ndev->name); -+ *charbuf = 0; -+ goto fail; -+ } -+ cpu_relax(); -+ } -+ -+ log(L_DEBUG, "count was %u\n", count); -+ *charbuf = read_reg8(adev, IO_ACX_PHY_DATA); -+ -+ log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg); -+ result = OK; -+ goto fail; /* silence compiler warning */ -+fail: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxpci_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) -+{ -+ FN_ENTER; -+ -+ /* mprusko said that 32bit accesses result in distorted sensitivity -+ * on his card. Unconfirmed, looks like it's not true (most likely since we -+ * now properly flush writes). */ -+ write_reg32(adev, IO_ACX_PHY_DATA, value); -+ write_reg32(adev, IO_ACX_PHY_ADDR, reg); -+ write_flush(adev); -+ write_reg32(adev, IO_ACX_PHY_CTL, 1); -+ write_flush(adev); -+ log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg); -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+#define NO_AUTO_INCREMENT 1 -+ -+/*********************************************************************** -+** acxpci_s_write_fw -+** -+** Write the firmware image into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** 1 firmware image corrupted -+** 0 success -+*/ -+static int -+acxpci_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset) -+{ -+ int len, size; -+ u32 sum, v32; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+ write_flush(adev); -+#endif -+ -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ sum += p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ len += 4; -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+ write_flush(adev); -+#endif -+ write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32); -+ } -+ -+ log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n", -+ size, sum, le32_to_cpu(fw_image->chksum)); -+ -+ /* compare our checksum with the stored image checksum */ -+ return (sum != le32_to_cpu(fw_image->chksum)); -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_validate_fw -+** -+** Compare the firmware image given with -+** the firmware image written into the card. -+** -+** Arguments: -+** adev wlan device structure -+** fw_image firmware image. -+** -+** Returns: -+** NOT_OK firmware image corrupted or not correctly written -+** OK success -+*/ -+static int -+acxpci_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image, -+ u32 offset) -+{ -+ u32 sum, v32, w32; -+ int len, size; -+ int result = OK; -+ /* we skip the first four bytes which contain the control sum */ -+ const u8 *p = (u8*)fw_image + 4; -+ -+ /* start the image checksum by adding the image size value */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ -+#else -+ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ -+#endif -+ -+ len = 0; -+ size = le32_to_cpu(fw_image->size) & (~3); -+ -+ while (likely(len < size)) { -+ v32 = be32_to_cpu(*(u32*)p); -+ p += 4; -+ len += 4; -+ -+#if NO_AUTO_INCREMENT -+ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); -+#endif -+ w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA); -+ -+ if (unlikely(w32 != v32)) { -+ printk("acx: FATAL: firmware upload: " -+ "data parts at offset %d don't match (0x%08X vs. 0x%08X)! " -+ "I/O timing issues or defective memory, with DWL-xx0+? " -+ "ACX_IO_WIDTH=16 may help. Please report\n", -+ len, v32, w32); -+ result = NOT_OK; -+ break; -+ } -+ -+ sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24); -+ } -+ -+ /* sum control verification */ -+ if (result != NOT_OK) { -+ if (sum != le32_to_cpu(fw_image->chksum)) { -+ printk("acx: FATAL: firmware upload: " -+ "checksums don't match!\n"); -+ result = NOT_OK; -+ } -+ } -+ -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_upload_fw -+** -+** Called from acx_reset_dev -+*/ -+static int -+acxpci_s_upload_fw(acx_device_t *adev) -+{ -+ firmware_image_t *fw_image = NULL; -+ int res = NOT_OK; -+ int try; -+ u32 file_size; -+ char filename[sizeof("tiacx1NNcNN")]; -+ -+ FN_ENTER; -+ -+ /* print exact chipset and radio ID to make sure people really get a clue on which files exactly they are supposed to provide, -+ * since firmware loading is the biggest enduser PITA with these chipsets. -+ * Not printing radio ID in 0xHEX in order to not confuse them into wrong file naming */ -+ printk( "acx: need to load firmware for acx1%02d chipset with radio ID %02x, please provide via firmware hotplug:\n" -+ "acx: either one file only (ombined firmware image file, radio-specific) or two files (radio-less base image file *plus* separate adio-specific extension file)\n", -+ IS_ACX111(adev)*11, adev->radio_type); -+ -+ /* Try combined, then main image */ -+ adev->need_radio_fw = 0; -+ snprintf(filename, sizeof(filename), "tiacx1%02dc%02X", -+ IS_ACX111(adev)*11, adev->radio_type); -+ -+ fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size); -+ if (!fw_image) { -+ adev->need_radio_fw = 1; -+ filename[sizeof("tiacx1NN")-1] = '\0'; -+ fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size); -+ if (!fw_image) { -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+ } -+ } -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxpci_s_write_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_write_fw (main/combined): %d\n", res); -+ if (OK == res) { -+ res = acxpci_s_validate_fw(adev, fw_image, 0); -+ log(L_DEBUG|L_INIT, "acx_validate_fw " -+ "(main/combined): %d\n", res); -+ } -+ -+ if (OK == res) { -+ SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED); -+ break; -+ } -+ printk("acx: firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+ vfree(fw_image); -+ -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_upload_radio -+** -+** Uploads the appropriate radio module firmware into the card. -+*/ -+int -+acxpci_s_upload_radio(acx_device_t *adev) -+{ -+ acx_ie_memmap_t mm; -+ firmware_image_t *radio_image; -+ acx_cmd_radioinit_t radioinit; -+ int res = NOT_OK; -+ int try; -+ u32 offset; -+ u32 size; -+ char filename[sizeof("tiacx1NNrNN")]; -+ -+ if (!adev->need_radio_fw) return OK; -+ -+ FN_ENTER; -+ -+ acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+ offset = le32_to_cpu(mm.CodeEnd); -+ -+ snprintf(filename, sizeof(filename), "tiacx1%02dr%02X", -+ IS_ACX111(adev)*11, -+ adev->radio_type); -+ radio_image = acx_s_read_fw(&adev->pdev->dev, filename, &size); -+ if (!radio_image) { -+ printk("acx: can't load radio module '%s'\n", filename); -+ goto fail; -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); -+ -+ for (try = 1; try <= 5; try++) { -+ res = acxpci_s_write_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res); -+ if (OK == res) { -+ res = acxpci_s_validate_fw(adev, radio_image, offset); -+ log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res); -+ } -+ -+ if (OK == res) -+ break; -+ printk("acx: radio firmware upload attempt #%d FAILED, " -+ "retrying...\n", try); -+ acx_s_msleep(1000); /* better wait for a while... */ -+ } -+ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); -+ radioinit.offset = cpu_to_le32(offset); -+ /* no endian conversion needed, remains in card CPU area: */ -+ radioinit.len = radio_image->size; -+ -+ vfree(radio_image); -+ -+ if (OK != res) -+ goto fail; -+ -+ /* will take a moment so let's have a big timeout */ -+ acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT, -+ &radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000)); -+ -+ res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); -+fail: -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxpci_l_reset_mac -+** -+** MAC will be reset -+** Call context: reset_dev -+*/ -+static void -+acxpci_l_reset_mac(acx_device_t *adev) -+{ -+ u16 temp; -+ -+ FN_ENTER; -+ -+ /* halt eCPU */ -+ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; -+ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); -+ -+ /* now do soft reset of eCPU, set bit */ -+ temp = read_reg16(adev, IO_ACX_SOFT_RESET) | 0x1; -+ log(L_DEBUG, "%s: enable soft reset...\n", __func__); -+ write_reg16(adev, IO_ACX_SOFT_RESET, temp); -+ write_flush(adev); -+ -+ /* now clear bit again: deassert eCPU reset */ -+ log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__); -+ write_reg16(adev, IO_ACX_SOFT_RESET, temp & ~0x1); -+ -+ /* now start a burst read from initial EEPROM */ -+ temp = read_reg16(adev, IO_ACX_EE_START) | 0x1; -+ write_reg16(adev, IO_ACX_EE_START, temp); -+ write_flush(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_verify_init -+*/ -+static int -+acxpci_s_verify_init(acx_device_t *adev) -+{ -+ int result = NOT_OK; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ timeout = jiffies + 2*HZ; -+ for (;;) { -+ u16 irqstat = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if (irqstat & HOST_INT_FCS_THRESHOLD) { -+ result = OK; -+ write_reg16(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD); -+ break; -+ } -+ if (time_after(jiffies, timeout)) -+ break; -+ /* Init may take up to ~0.5 sec total */ -+ acx_s_msleep(50); -+ } -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** A few low-level helpers -+** -+** Note: these functions are not protected by lock -+** and thus are never allowed to be called from IRQ. -+** Also they must not race with fw upload which uses same hw regs -+*/ -+ -+/*********************************************************************** -+** acxpci_write_cmd_type_status -+*/ -+ -+static inline void -+acxpci_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status) -+{ -+ writel(type | (status << 16), adev->cmd_area); -+ write_flush(adev); -+} -+ -+ -+/*********************************************************************** -+** acxpci_read_cmd_type_status -+*/ -+static u32 -+acxpci_read_cmd_type_status(acx_device_t *adev) -+{ -+ u32 cmd_type, cmd_status; -+ -+ cmd_type = readl(adev->cmd_area); -+ cmd_status = (cmd_type >> 16); -+ cmd_type = (u16)cmd_type; -+ -+ log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n", -+ cmd_type, cmd_status, -+ acx_cmd_status_str(cmd_status)); -+ -+ return cmd_status; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_reset_dev -+** -+** Arguments: -+** netdevice that contains the adev variable -+** Returns: -+** NOT_OK on fail -+** OK on success -+** Side effects: -+** device is hard reset -+** Call context: -+** acxpci_e_probe -+** Comment: -+** This resets the device using low level hardware calls -+** as well as uploads and verifies the firmware to the card -+*/ -+ -+static inline void -+init_mboxes(acx_device_t *adev) -+{ -+ u32 cmd_offs, info_offs; -+ -+ cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS); -+ info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS); -+ adev->cmd_area = (u8 *)adev->iobase2 + cmd_offs; -+ adev->info_area = (u8 *)adev->iobase2 + info_offs; -+ log(L_DEBUG, "iobase2=%p\n" -+ "cmd_mbox_offset=%X cmd_area=%p\n" -+ "info_mbox_offset=%X info_area=%p\n", -+ adev->iobase2, -+ cmd_offs, adev->cmd_area, -+ info_offs, adev->info_area); -+} -+ -+ -+static inline void -+read_eeprom_area(acx_device_t *adev) -+{ -+#if ACX_DEBUG > 1 -+ int offs; -+ u8 tmp; -+ -+ for (offs = 0x8c; offs < 0xb9; offs++) -+ acxpci_read_eeprom_byte(adev, offs, &tmp); -+#endif -+} -+ -+ -+static int -+acxpci_s_reset_dev(acx_device_t *adev) -+{ -+ const char* msg = ""; -+ unsigned long flags; -+ int result = NOT_OK; -+ u16 hardware_info; -+ u16 ecpu_ctrl; -+ int count; -+ -+ FN_ENTER; -+ -+ /* reset the device to make sure the eCPU is stopped -+ * to upload the firmware correctly */ -+ -+ acx_lock(adev, flags); -+ -+ acxpci_l_reset_mac(adev); -+ -+ ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1; -+ if (!ecpu_ctrl) { -+ msg = "eCPU is already running. "; -+ goto end_unlock; -+ } -+ -+#ifdef WE_DONT_NEED_THAT_DO_WE -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) { -+ /* eCPU most likely means "embedded CPU" */ -+ msg = "eCPU did not start after boot from flash. "; -+ goto end_unlock; -+ } -+ -+ /* check sense on reset flags */ -+ if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) { -+ printk("%s: eCPU did not start after boot (SOR), " -+ "is this fatal?\n", adev->ndev->name); -+ } -+#endif -+ /* scan, if any, is stopped now, setting corresponding IRQ bit */ -+ adev->irq_status |= HOST_INT_SCAN_COMPLETE; -+ -+ acx_unlock(adev, flags); -+ -+ /* need to know radio type before fw load */ -+ /* Need to wait for arrival of this information in a loop, -+ * most probably since eCPU runs some init code from EEPROM -+ * (started burst read in reset_mac()) which also -+ * sets the radio type ID */ -+ -+ count = 0xffff; -+ do { -+ hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION); -+ if (!--count) { -+ msg = "eCPU didn't indicate radio type"; -+ goto end_fail; -+ } -+ cpu_relax(); -+ } while (!(hardware_info & 0xff00)); /* radio type still zero? */ -+ -+ /* printk("DEBUG: count %d\n", count); */ -+ adev->form_factor = hardware_info & 0xff; -+ adev->radio_type = hardware_info >> 8; -+ -+ /* load the firmware */ -+ if (OK != acxpci_s_upload_fw(adev)) -+ goto end_fail; -+ -+ /* acx_s_msleep(10); this one really shouldn't be required */ -+ -+ /* now start eCPU by clearing bit */ -+ write_reg16(adev, IO_ACX_ECPU_CTRL, ecpu_ctrl & ~0x1); -+ log(L_DEBUG, "booted eCPU up and waiting for completion...\n"); -+ -+ /* wait for eCPU bootup */ -+ if (OK != acxpci_s_verify_init(adev)) { -+ msg = "timeout waiting for eCPU. "; -+ goto end_fail; -+ } -+ log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n"); -+ -+ init_mboxes(adev); -+ acxpci_write_cmd_type_status(adev, 0, 0); -+ -+ /* test that EEPROM is readable */ -+ read_eeprom_area(adev); -+ -+ result = OK; -+ goto end; -+ -+/* Finish error message. Indicate which function failed */ -+end_unlock: -+ acx_unlock(adev, flags); -+end_fail: -+ printk("acx: %sreset_dev() FAILED\n", msg); -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_issue_cmd_timeo -+** -+** Sends command to fw, extract result -+** -+** NB: we do _not_ take lock inside, so be sure to not touch anything -+** which may interfere with IRQ handler operation -+** -+** TODO: busy wait is a bit silly, so: -+** 1) stop doing many iters - go to sleep after first -+** 2) go to waitqueue based approach: wait, not poll! -+*/ -+#undef FUNC -+#define FUNC "issue_cmd" -+ -+#if !ACX_DEBUG -+int -+acxpci_s_issue_cmd_timeo( -+ acx_device_t *adev, -+ unsigned int cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout) -+{ -+#else -+int -+acxpci_s_issue_cmd_timeo_debug( -+ acx_device_t *adev, -+ unsigned cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned cmd_timeout, -+ const char* cmdstr) -+{ -+ unsigned long start = jiffies; -+#endif -+ const char *devname; -+ unsigned counter; -+ u16 irqtype; -+ u16 cmd_status; -+ unsigned long timeout; -+ -+ FN_ENTER; -+ -+ devname = adev->ndev->name; -+ if (!devname || !devname[0] || devname[4]=='%') -+ devname = "acx"; -+ -+ log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n", -+ cmdstr, buflen, cmd_timeout, -+ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); -+ -+ if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) { -+ printk("%s: "FUNC"(): firmware is not loaded yet, " -+ "cannot execute commands!\n", devname); -+ goto bad; -+ } -+ -+ if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) { -+ printk("input buffer (len=%u):\n", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ -+ /* wait for firmware to become idle for our command submission */ -+ timeout = HZ/5; -+ counter = (timeout * 1000 / HZ) - 1; /* in ms */ -+ timeout += jiffies; -+ do { -+ cmd_status = acxpci_read_cmd_type_status(adev); -+ /* Test for IDLE state */ -+ if (!cmd_status) -+ break; -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ if (!counter) { -+ /* the card doesn't get idle, we're in trouble */ -+ printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n", -+ devname, cmd_status); -+ goto bad; -+ } else if (counter < 190) { /* if waited >10ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. " -+ "Please report\n", 199 - counter); -+ } -+ -+ /* now write the parameters of the command if needed */ -+ if (buffer && buflen) { -+ /* if it's an INTERROGATE command, just pass the length -+ * of parameters to read, as data */ -+#if CMD_DISCOVERY -+ if (cmd == ACX1xx_CMD_INTERROGATE) -+ memset_io(adev->cmd_area + 4, 0xAA, buflen); -+#endif -+ /* adev->cmd_area points to PCI device's memory, not to RAM! */ -+ memcpy_toio(adev->cmd_area + 4, buffer, -+ (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen); -+ } -+ /* now write the actual command type */ -+ acxpci_write_cmd_type_status(adev, cmd, 0); -+ /* execute command */ -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD); -+ write_flush(adev); -+ -+ /* wait for firmware to process command */ -+ -+ /* Ensure nonzero and not too large timeout. -+ ** Also converts e.g. 100->99, 200->199 -+ ** which is nice but not essential */ -+ cmd_timeout = (cmd_timeout-1) | 1; -+ if (unlikely(cmd_timeout > 1199)) -+ cmd_timeout = 1199; -+ /* clear CMD_COMPLETE bit. can be set only by IRQ handler: */ -+ adev->irq_status &= ~HOST_INT_CMD_COMPLETE; -+ -+ /* we schedule away sometimes (timeout can be large) */ -+ counter = cmd_timeout; -+ timeout = jiffies + cmd_timeout * HZ / 1000; -+ do { -+ if (!adev->irqs_active) { /* IRQ disabled: poll */ -+ irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ write_reg16(adev, IO_ACX_IRQ_ACK, -+ HOST_INT_CMD_COMPLETE); -+ break; -+ } -+ } else { /* Wait when IRQ will set the bit */ -+ irqtype = adev->irq_status; -+ if (irqtype & HOST_INT_CMD_COMPLETE) -+ break; -+ } -+ -+ if (counter % 8 == 0) { -+ if (time_after(jiffies, timeout)) { -+ counter = 0; -+ break; -+ } -+ /* we waited 8 iterations, no luck. Sleep 8 ms */ -+ acx_s_msleep(8); -+ } -+ } while (likely(--counter)); -+ -+ /* save state for debugging */ -+ cmd_status = acxpci_read_cmd_type_status(adev); -+ -+ /* put the card in IDLE state */ -+ acxpci_write_cmd_type_status(adev, 0, 0); -+ -+ if (!counter) { /* timed out! */ -+ printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. " -+ "irq bits:0x%04X irq_status:0x%04X timeout:%dms " -+ "cmd_status:%d (%s)\n", -+ devname, (adev->irqs_active) ? "waiting" : "polling", -+ irqtype, adev->irq_status, cmd_timeout, -+ cmd_status, acx_cmd_status_str(cmd_status)); -+ goto bad; -+ } else if (cmd_timeout - counter > 30) { /* if waited >30ms... */ -+ log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. " -+ "count:%d. Please report\n", -+ (adev->irqs_active) ? "waited" : "polled", -+ cmd_timeout - counter, counter); -+ } -+ -+ if (1 != cmd_status) { /* it is not a 'Success' */ -+ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). " -+ "Took %dms of %d\n", -+ devname, cmd_status, acx_cmd_status_str(cmd_status), -+ cmd_timeout - counter, cmd_timeout); -+ /* zero out result buffer -+ * WARNING: this will trash stack in case of illegally large input -+ * length! */ -+ if (buffer && buflen) -+ memset(buffer, 0, buflen); -+ goto bad; -+ } -+ -+ /* read in result parameters if needed */ -+ if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) { -+ /* adev->cmd_area points to PCI device's memory, not to RAM! */ -+ memcpy_fromio(buffer, adev->cmd_area + 4, buflen); -+ if (acx_debug & L_DEBUG) { -+ printk("output buffer (len=%u): ", buflen); -+ acx_dump_bytes(buffer, buflen); -+ } -+ } -+/* ok: */ -+ log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n", -+ cmdstr, jiffies - start); -+ FN_EXIT1(OK); -+ return OK; -+ -+bad: -+ /* Give enough info so that callers can avoid -+ ** printing their own diagnostic messages */ -+#if ACX_DEBUG -+ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); -+#else -+ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); -+#endif -+ dump_stack(); -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+#ifdef NONESSENTIAL_FEATURES -+typedef struct device_id { -+ unsigned char id[6]; -+ char *descr; -+ char *type; -+} device_id_t; -+ -+static const device_id_t -+device_ids[] = -+{ -+ { -+ {'G', 'l', 'o', 'b', 'a', 'l'}, -+ NULL, -+ NULL, -+ }, -+ { -+ {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, -+ "uninitialized", -+ "SpeedStream SS1021 or Gigafast WF721-AEX" -+ }, -+ { -+ {0x80, 0x81, 0x82, 0x83, 0x84, 0x85}, -+ "non-standard", -+ "DrayTek Vigor 520" -+ }, -+ { -+ {'?', '?', '?', '?', '?', '?'}, -+ "non-standard", -+ "Level One WPC-0200" -+ }, -+ { -+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, -+ "empty", -+ "DWL-650+ variant" -+ } -+}; -+ -+static void -+acx_show_card_eeprom_id(acx_device_t *adev) -+{ -+ unsigned char buffer[CARD_EEPROM_ID_SIZE]; -+ int i; -+ -+ memset(&buffer, 0, CARD_EEPROM_ID_SIZE); -+ /* use direct EEPROM access */ -+ for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) { -+ if (OK != acxpci_read_eeprom_byte(adev, -+ ACX100_EEPROM_ID_OFFSET + i, -+ &buffer[i])) { -+ printk("acx: reading EEPROM FAILED\n"); -+ break; -+ } -+ } -+ -+ for (i = 0; i < VEC_SIZE(device_ids); i++) { -+ if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) { -+ if (device_ids[i].descr) { -+ printk("acx: EEPROM card ID string check " -+ "found %s card ID: is this %s?\n", -+ device_ids[i].descr, device_ids[i].type); -+ } -+ break; -+ } -+ } -+ if (i == VEC_SIZE(device_ids)) { -+ printk("acx: EEPROM card ID string check found " -+ "unknown card: expected 'Global', got '%.*s\'. " -+ "Please report\n", CARD_EEPROM_ID_SIZE, buffer); -+ } -+} -+#endif /* NONESSENTIAL_FEATURES */ -+ -+ -+/*********************************************************************** -+** acxpci_free_desc_queues -+** -+** Releases the queues that have been allocated, the -+** others have been initialised to NULL so this -+** function can be used if only part of the queues were allocated. -+*/ -+ -+static inline void -+free_coherent(struct pci_dev *hwdev, size_t size, -+ void *vaddr, dma_addr_t dma_handle) -+{ -+ dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, -+ size, vaddr, dma_handle); -+} -+ -+void -+acxpci_free_desc_queues(acx_device_t *adev) -+{ -+#define ACX_FREE_QUEUE(size, ptr, phyaddr) \ -+ if (ptr) { \ -+ free_coherent(0, size, ptr, phyaddr); \ -+ ptr = NULL; \ -+ size = 0; \ -+ } -+ -+ FN_ENTER; -+ -+ ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy); -+ -+ adev->txdesc_start = NULL; -+ -+ ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy); -+ ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy); -+ -+ adev->rxdesc_start = NULL; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_delete_dma_regions -+*/ -+static void -+acxpci_s_delete_dma_regions(acx_device_t *adev) -+{ -+ unsigned long flags; -+ -+ FN_ENTER; -+ /* disable radio Tx/Rx. Shouldn't we use the firmware commands -+ * here instead? Or are we that much down the road that it's no -+ * longer possible here? */ -+ write_reg16(adev, IO_ACX_ENABLE, 0); -+ -+ acx_s_msleep(100); -+ -+ acx_lock(adev, flags); -+ acxpci_free_desc_queues(adev); -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_e_probe -+** -+** Probe routine called when a PCI device w/ matching ID is found. -+** Here's the sequence: -+** - Allocate the PCI resources. -+** - Read the PCMCIA attribute memory to make sure we have a WLAN card -+** - Reset the MAC -+** - Initialize the dev and wlan data -+** - Initialize the MAC -+** -+** pdev - ptr to pci device structure containing info about pci configuration -+** id - ptr to the device id entry that matched this device -+*/ -+static const u16 -+IO_ACX100[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_END_CTL */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x007c, /* IO_ACX_INT_TRIG */ -+ 0x0098, /* IO_ACX_IRQ_MASK */ -+ 0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00ac, /* IO_ACX_IRQ_ACK */ -+ 0x00b0, /* IO_ACX_HINT_TRIG */ -+ -+ 0x0104, /* IO_ACX_ENABLE */ -+ -+ 0x0250, /* IO_ACX_EEPROM_CTL */ -+ 0x0254, /* IO_ACX_EEPROM_ADDR */ -+ 0x0258, /* IO_ACX_EEPROM_DATA */ -+ 0x025c, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0268, /* IO_ACX_PHY_ADDR */ -+ 0x026c, /* IO_ACX_PHY_DATA */ -+ 0x0270, /* IO_ACX_PHY_CTL */ -+ -+ 0x0290, /* IO_ACX_GPIO_OE */ -+ -+ 0x0298, /* IO_ACX_GPIO_OUT */ -+ -+ 0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x02ac, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x02d0, /* IO_ACX_EE_START */ -+ 0x02d4, /* IO_ACX_SOR_CFG */ -+ 0x02d8 /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static const u16 -+IO_ACX111[] = -+{ -+ 0x0000, /* IO_ACX_SOFT_RESET */ -+ -+ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ -+ 0x0018, /* IO_ACX_SLV_MEM_DATA */ -+ 0x001c, /* IO_ACX_SLV_MEM_CTL */ -+ 0x0020, /* IO_ACX_SLV_END_CTL */ -+ -+ 0x0034, /* IO_ACX_FEMR */ -+ -+ 0x00b4, /* IO_ACX_INT_TRIG */ -+ 0x00d4, /* IO_ACX_IRQ_MASK */ -+ /* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */ -+ 0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */ -+ 0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */ -+ 0x00e8, /* IO_ACX_IRQ_ACK */ -+ 0x00ec, /* IO_ACX_HINT_TRIG */ -+ -+ 0x01d0, /* IO_ACX_ENABLE */ -+ -+ 0x0338, /* IO_ACX_EEPROM_CTL */ -+ 0x033c, /* IO_ACX_EEPROM_ADDR */ -+ 0x0340, /* IO_ACX_EEPROM_DATA */ -+ 0x0344, /* IO_ACX_EEPROM_CFG */ -+ -+ 0x0350, /* IO_ACX_PHY_ADDR */ -+ 0x0354, /* IO_ACX_PHY_DATA */ -+ 0x0358, /* IO_ACX_PHY_CTL */ -+ -+ 0x0374, /* IO_ACX_GPIO_OE */ -+ -+ 0x037c, /* IO_ACX_GPIO_OUT */ -+ -+ 0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */ -+ 0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */ -+ 0x0390, /* IO_ACX_EEPROM_INFORMATION */ -+ -+ 0x0100, /* IO_ACX_EE_START */ -+ 0x0104, /* IO_ACX_SOR_CFG */ -+ 0x0108, /* IO_ACX_ECPU_CTRL */ -+}; -+ -+static void -+dummy_netdev_init(struct net_device *ndev) {} -+ -+static int __devinit -+acxpci_e_probe(struct pci_dev *pdev, const struct pci_device_id *id) -+{ -+ acx111_ie_configoption_t co; -+ unsigned long mem_region1 = 0; -+ unsigned long mem_region2 = 0; -+ unsigned long mem_region1_size; -+ unsigned long mem_region2_size; -+ unsigned long phymem1; -+ unsigned long phymem2; -+ void *mem1 = NULL; -+ void *mem2 = NULL; -+ acx_device_t *adev = NULL; -+ struct net_device *ndev = NULL; -+ const char *chip_name; -+ int result = -EIO; -+ int err; -+ u8 chip_type; -+ -+ FN_ENTER; -+ -+ /* Enable the PCI device */ -+ if (pci_enable_device(pdev)) { -+ printk("acx: pci_enable_device() FAILED\n"); -+ result = -ENODEV; -+ goto fail_pci_enable_device; -+ } -+ -+ /* enable busmastering (required for CardBus) */ -+ pci_set_master(pdev); -+ -+ /* FIXME: prism54 calls pci_set_mwi() here, -+ * should we do/support the same? */ -+ -+ /* chiptype is u8 but id->driver_data is ulong -+ ** Works for now (possible values are 1 and 2) */ -+ chip_type = (u8)id->driver_data; -+ /* acx100 and acx111 have different PCI memory regions */ -+ if (chip_type == CHIPTYPE_ACX100) { -+ chip_name = "ACX100"; -+ mem_region1 = PCI_ACX100_REGION1; -+ mem_region1_size = PCI_ACX100_REGION1_SIZE; -+ -+ mem_region2 = PCI_ACX100_REGION2; -+ mem_region2_size = PCI_ACX100_REGION2_SIZE; -+ } else if (chip_type == CHIPTYPE_ACX111) { -+ chip_name = "ACX111"; -+ mem_region1 = PCI_ACX111_REGION1; -+ mem_region1_size = PCI_ACX111_REGION1_SIZE; -+ -+ mem_region2 = PCI_ACX111_REGION2; -+ mem_region2_size = PCI_ACX111_REGION2_SIZE; -+ } else { -+ printk("acx: unknown chip type 0x%04X\n", chip_type); -+ goto fail_unknown_chiptype; -+ } -+ -+ /* Figure out our resources */ -+ phymem1 = pci_resource_start(pdev, mem_region1); -+ phymem2 = pci_resource_start(pdev, mem_region2); -+ if (!request_mem_region(phymem1, pci_resource_len(pdev, mem_region1), "acx_1")) { -+ printk("acx: cannot reserve PCI memory region 1 (are you sure " -+ "you have CardBus support in kernel?)\n"); -+ goto fail_request_mem_region1; -+ } -+ if (!request_mem_region(phymem2, pci_resource_len(pdev, mem_region2), "acx_2")) { -+ printk("acx: cannot reserve PCI memory region 2\n"); -+ goto fail_request_mem_region2; -+ } -+ -+ /* this used to be ioremap(), but ioremap_nocache() -+ * is much less risky, right? (and slower?) -+ * FIXME: we may want to go back to cached variant if it's -+ * certain that our code really properly handles -+ * cached operation (memory barriers, volatile?, ...) -+ * (but always keep this comment here regardless!) -+ * Possibly make this a driver config setting? */ -+ -+ mem1 = ioremap_nocache(phymem1, mem_region1_size); -+ if (!mem1) { -+ printk("acx: ioremap() FAILED\n"); -+ goto fail_ioremap1; -+ } -+ mem2 = ioremap_nocache(phymem2, mem_region2_size); -+ if (!mem2) { -+ printk("acx: ioremap() #2 FAILED\n"); -+ goto fail_ioremap2; -+ } -+ -+ printk("acx: found %s-based wireless network card at %s, irq:%d, " -+ "phymem1:0x%lX, phymem2:0x%lX, mem1:0x%p, mem1_size:%ld, " -+ "mem2:0x%p, mem2_size:%ld\n", -+ chip_name, pci_name(pdev), pdev->irq, phymem1, phymem2, -+ mem1, mem_region1_size, -+ mem2, mem_region2_size); -+ log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug); -+ -+ if (0 == pdev->irq) { -+ printk("acx: can't use IRQ 0\n"); -+ goto fail_irq; -+ } -+ -+ ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init); -+ /* (NB: memsets to 0 entire area) */ -+ if (!ndev) { -+ printk("acx: no memory for netdevice struct\n"); -+ goto fail_alloc_netdev; -+ } -+ -+ ether_setup(ndev); -+ ndev->open = &acxpci_e_open; -+ ndev->stop = &acxpci_e_close; -+ ndev->hard_start_xmit = &acx_i_start_xmit; -+ ndev->get_stats = &acx_e_get_stats; -+#if IW_HANDLER_VERSION <= 5 -+ ndev->get_wireless_stats = &acx_e_get_wireless_stats; -+#endif -+ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -+ ndev->set_multicast_list = &acxpci_i_set_multicast_list; -+ ndev->tx_timeout = &acxpci_i_tx_timeout; -+ ndev->change_mtu = &acx_e_change_mtu; -+ ndev->watchdog_timeo = 4 * HZ; -+ ndev->irq = pdev->irq; -+ ndev->base_addr = pci_resource_start(pdev, 0); -+ -+ adev = ndev2adev(ndev); -+ spin_lock_init(&adev->lock); /* initial state: unlocked */ -+ /* We do not start with downed sem: we want PARANOID_LOCKING to work */ -+ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ -+ /* since nobody can see new netdev yet, we can as well -+ ** just _presume_ that we're under sem (instead of actually taking it): */ -+ /* acx_sem_lock(adev); */ -+ adev->pdev = pdev; -+ adev->ndev = ndev; -+ adev->dev_type = DEVTYPE_PCI; -+ adev->chip_type = chip_type; -+ adev->chip_name = chip_name; -+ adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111; -+ adev->membase = phymem1; -+ adev->iobase = mem1; -+ adev->membase2 = phymem2; -+ adev->iobase2 = mem2; -+ /* to find crashes due to weird driver access -+ * to unconfigured interface (ifup) */ -+ adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead; -+ -+#ifdef NONESSENTIAL_FEATURES -+ acx_show_card_eeprom_id(adev); -+#endif /* NONESSENTIAL_FEATURES */ -+ -+#ifdef SET_MODULE_OWNER -+ SET_MODULE_OWNER(ndev); -+#endif -+ SET_NETDEV_DEV(ndev, &pdev->dev); -+ -+ log(L_IRQ|L_INIT, "using IRQ %d\n", pdev->irq); -+ -+ /* need to be able to restore PCI state after a suspend */ -+ pci_save_state(pdev); -+ pci_set_drvdata(pdev, ndev); -+ -+ /* ok, pci setup is finished, now start initializing the card */ -+ -+ /* NB: read_reg() reads may return bogus data before reset_dev(), -+ * since the firmware which directly controls large parts of the I/O -+ * registers isn't initialized yet. -+ * acx100 seems to be more affected than acx111 */ -+ if (OK != acxpci_s_reset_dev(adev)) -+ goto fail_reset; -+ -+ if (IS_ACX100(adev)) { -+ /* ACX100: configopt struct in cmd mailbox - directly after reset */ -+ memcpy_fromio(&co, adev->cmd_area, sizeof(co)); -+ } -+ -+ if (OK != acx_s_init_mac(adev)) -+ goto fail_init_mac; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111: configopt struct needs to be queried after full init */ -+ acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS); -+ } -+ -+/* TODO: merge them into one function, they are called just once and are the same for pci & usb */ -+ if (OK != acxpci_read_eeprom_byte(adev, 0x05, &adev->eeprom_version)) -+ goto fail_read_eeprom_version; -+ -+ acx_s_parse_configoption(adev, &co); -+ acx_s_set_defaults(adev); -+ acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */ -+ acx_display_hardware_details(adev); -+ -+ /* Register the card, AFTER everything else has been set up, -+ * since otherwise an ioctl could step on our feet due to -+ * firmware operations happening in parallel or uninitialized data */ -+ err = register_netdev(ndev); -+ if (OK != err) { -+ printk("acx: register_netdev() FAILED: %d\n", err); -+ goto fail_register_netdev; -+ } -+ -+ acx_proc_register_entries(ndev); -+ -+ /* Now we have our device, so make sure the kernel doesn't try -+ * to send packets even though we're not associated to a network yet */ -+ acx_stop_queue(ndev, "on probe"); -+ acx_carrier_off(ndev, "on probe"); -+ -+ /* after register_netdev() userspace may start working with dev -+ * (in particular, on other CPUs), we only need to up the sem */ -+ /* acx_sem_unlock(adev); */ -+ -+ printk("acx "ACX_RELEASE": net device %s, driver compiled " -+ "against wireless extensions %d and Linux %s\n", -+ ndev->name, WIRELESS_EXT, UTS_RELEASE); -+ -+#if CMD_DISCOVERY -+ great_inquisitor(adev); -+#endif -+ -+ result = OK; -+ goto done; -+ -+ /* error paths: undo everything in reverse order... */ -+ -+fail_register_netdev: -+ -+ acxpci_s_delete_dma_regions(adev); -+ pci_set_drvdata(pdev, NULL); -+ -+fail_init_mac: -+fail_read_eeprom_version: -+fail_reset: -+ -+ free_netdev(ndev); -+fail_alloc_netdev: -+fail_irq: -+ -+ iounmap(mem2); -+fail_ioremap2: -+ -+ iounmap(mem1); -+fail_ioremap1: -+ -+ release_mem_region(pci_resource_start(pdev, mem_region2), -+ pci_resource_len(pdev, mem_region2)); -+fail_request_mem_region2: -+ -+ release_mem_region(pci_resource_start(pdev, mem_region1), -+ pci_resource_len(pdev, mem_region1)); -+fail_request_mem_region1: -+fail_unknown_chiptype: -+ -+ pci_disable_device(pdev); -+fail_pci_enable_device: -+ -+ pci_set_power_state(pdev, PCI_D3hot); -+ -+done: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxpci_e_remove -+** -+** Shut device down (if not hot unplugged) -+** and deallocate PCI resources for the acx chip. -+** -+** pdev - ptr to PCI device structure containing info about pci configuration -+*/ -+static void __devexit -+acxpci_e_remove(struct pci_dev *pdev) -+{ -+ struct net_device *ndev; -+ acx_device_t *adev; -+ unsigned long mem_region1, mem_region2; -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ ndev = (struct net_device*) pci_get_drvdata(pdev); -+ if (!ndev) { -+ log(L_DEBUG, "%s: card is unused. Skipping any release code\n", -+ __func__); -+ goto end; -+ } -+ -+ adev = ndev2adev(ndev); -+ -+ /* If device wasn't hot unplugged... */ -+ if (adev_present(adev)) { -+ -+ acx_sem_lock(adev); -+ -+ /* disable both Tx and Rx to shut radio down properly */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); -+ -+#ifdef REDUNDANT -+ /* put the eCPU to sleep to save power -+ * Halting is not possible currently, -+ * since not supported by all firmware versions */ -+ acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0); -+#endif -+ acx_lock(adev, flags); -+ /* disable power LED to save power :-) */ -+ log(L_INIT, "switching off power LED to save power\n"); -+ acxpci_l_power_led(adev, 0); -+ /* stop our eCPU */ -+ if (IS_ACX111(adev)) { -+ /* FIXME: does this actually keep halting the eCPU? -+ * I don't think so... -+ */ -+ acxpci_l_reset_mac(adev); -+ } else { -+ u16 temp; -+ /* halt eCPU */ -+ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; -+ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); -+ write_flush(adev); -+ } -+ acx_unlock(adev, flags); -+ -+ acx_sem_unlock(adev); -+ } -+ -+ /* unregister the device to not let the kernel -+ * (e.g. ioctls) access a half-deconfigured device -+ * NB: this will cause acxpci_e_close() to be called, -+ * thus we shouldn't call it under sem! */ -+ log(L_INIT, "removing device %s\n", ndev->name); -+ unregister_netdev(ndev); -+ -+ /* unregister_netdev ensures that no references to us left. -+ * For paranoid reasons we continue to follow the rules */ -+ acx_sem_lock(adev); -+ -+ if (adev->dev_state_mask & ACX_STATE_IFACE_UP) { -+ acxpci_s_down(ndev); -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ } -+ -+ acx_proc_unregister_entries(ndev); -+ -+ if (IS_ACX100(adev)) { -+ mem_region1 = PCI_ACX100_REGION1; -+ mem_region2 = PCI_ACX100_REGION2; -+ } else { -+ mem_region1 = PCI_ACX111_REGION1; -+ mem_region2 = PCI_ACX111_REGION2; -+ } -+ -+ /* finally, clean up PCI bus state */ -+ acxpci_s_delete_dma_regions(adev); -+ if (adev->iobase) iounmap(adev->iobase); -+ if (adev->iobase2) iounmap(adev->iobase2); -+ release_mem_region(pci_resource_start(pdev, mem_region1), -+ pci_resource_len(pdev, mem_region1)); -+ release_mem_region(pci_resource_start(pdev, mem_region2), -+ pci_resource_len(pdev, mem_region2)); -+ pci_disable_device(pdev); -+ -+ /* remove dev registration */ -+ pci_set_drvdata(pdev, NULL); -+ -+ acx_sem_unlock(adev); -+ -+ /* Free netdev (quite late, -+ * since otherwise we might get caught off-guard -+ * by a netdev timeout handler execution -+ * expecting to see a working dev...) */ -+ free_netdev(ndev); -+ -+ /* put device into ACPI D3 mode (shutdown) */ -+ pci_set_power_state(pdev, PCI_D3hot); -+ -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** TODO: PM code needs to be fixed / debugged / tested. -+*/ -+#ifdef CONFIG_PM -+static int -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+acxpci_e_suspend(struct pci_dev *pdev, pm_message_t state) -+#else -+acxpci_e_suspend(struct pci_dev *pdev, u32 state) -+#endif -+{ -+ struct net_device *ndev = pci_get_drvdata(pdev); -+ acx_device_t *adev; -+ -+ FN_ENTER; -+ printk("acx: suspend handler is experimental!\n"); -+ printk("sus: dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ goto end; -+ -+ adev = ndev2adev(ndev); -+ printk("sus: adev %p\n", adev); -+ -+ acx_sem_lock(adev); -+ -+ netif_device_detach(ndev); /* this one cannot sleep */ -+ acxpci_s_down(ndev); -+ /* down() does not set it to 0xffff, but here we really want that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ acxpci_s_delete_dma_regions(adev); -+ pci_save_state(pdev); -+ pci_set_power_state(pdev, PCI_D3hot); -+ -+ acx_sem_unlock(adev); -+end: -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+static int -+acxpci_e_resume(struct pci_dev *pdev) -+{ -+ struct net_device *ndev = pci_get_drvdata(pdev); -+ acx_device_t *adev; -+ -+ FN_ENTER; -+ -+ printk("acx: resume handler is experimental!\n"); -+ printk("rsm: got dev %p\n", ndev); -+ -+ if (!netif_running(ndev)) -+ goto end; -+ -+ adev = ndev2adev(ndev); -+ printk("rsm: got adev %p\n", adev); -+ -+ acx_sem_lock(adev); -+ -+ pci_set_power_state(pdev, PCI_D0); -+ printk("rsm: power state PCI_D0 set\n"); -+ pci_restore_state(pdev); -+ printk("rsm: PCI state restored\n"); -+ -+ if (OK != acxpci_s_reset_dev(adev)) -+ goto end_unlock; -+ printk("rsm: device reset done\n"); -+ if (OK != acx_s_init_mac(adev)) -+ goto end_unlock; -+ printk("rsm: init MAC done\n"); -+ -+ acxpci_s_up(ndev); -+ printk("rsm: acx up done\n"); -+ -+ /* now even reload all card parameters as they were before suspend, -+ * and possibly be back in the network again already :-) */ -+ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) { -+ adev->set_mask = GETSET_ALL; -+ acx_s_update_card_settings(adev); -+ printk("rsm: settings updated\n"); -+ } -+ netif_device_attach(ndev); -+ printk("rsm: device attached\n"); -+ -+end_unlock: -+ acx_sem_unlock(adev); -+end: -+ /* we need to return OK here anyway, right? */ -+ FN_EXIT0; -+ return OK; -+} -+#endif /* CONFIG_PM */ -+ -+ -+/*********************************************************************** -+** acxpci_s_up -+** -+** This function is called by acxpci_e_open (when ifconfig sets the device as up) -+** -+** Side effects: -+** - Enables on-card interrupt requests -+** - calls acx_s_start -+*/ -+ -+static void -+enable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask); -+ write_reg16(adev, IO_ACX_FEMR, 0x8000); -+ adev->irqs_active = 1; -+ FN_EXIT0; -+} -+ -+static void -+acxpci_s_up(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ enable_acx_irq(adev); -+ acx_unlock(adev, flags); -+ -+ /* acx fw < 1.9.3.e has a hardware timer, and older drivers -+ ** used to use it. But we don't do that anymore, our OS -+ ** has reliable software timers */ -+ init_timer(&adev->mgmt_timer); -+ adev->mgmt_timer.function = acx_i_timer; -+ adev->mgmt_timer.data = (unsigned long)adev; -+ -+ /* Need to set ACX_STATE_IFACE_UP first, or else -+ ** timer won't be started by acx_set_status() */ -+ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_2_STA: -+ /* actual scan cmd will happen in start() */ -+ acx_set_status(adev, ACX_STATUS_1_SCANNING); break; -+ case ACX_MODE_3_AP: -+ case ACX_MODE_MONITOR: -+ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break; -+ } -+ -+ acx_s_start(adev); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_down -+** -+** NB: device may be already hot unplugged if called from acxpci_e_remove() -+** -+** Disables on-card interrupt request, stops softirq and timer, stops queue, -+** sets status == STOPPED -+*/ -+ -+static void -+disable_acx_irq(acx_device_t *adev) -+{ -+ FN_ENTER; -+ -+ /* I guess mask is not 0xffff because acx100 won't signal -+ ** cmd completion then (needed for ifup). -+ ** Someone with acx100 please confirm */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ adev->irqs_active = 0; -+ FN_EXIT0; -+} -+ -+static void -+acxpci_s_down(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ /* Disable IRQs first, so that IRQs cannot race with us */ -+ /* then wait until interrupts have finished executing on other CPUs */ -+ acx_lock(adev, flags); -+ disable_acx_irq(adev); -+ synchronize_irq(adev->pdev->irq); -+ acx_unlock(adev, flags); -+ -+ /* we really don't want to have an asynchronous tasklet disturb us -+ ** after something vital for its job has been shut down, so -+ ** end all remaining work now. -+ ** -+ ** NB: carrier_off (done by set_status below) would lead to -+ ** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK(). -+ ** That's why we do FLUSH first. -+ ** -+ ** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK() -+ ** waits for acx_e_after_interrupt_task to complete if it is running -+ ** on another CPU, but acx_e_after_interrupt_task -+ ** will sleep on sem forever, because it is taken by us! -+ ** Work around that by temporary sem unlock. -+ ** This will fail miserably if we'll be hit by concurrent -+ ** iwconfig or something in between. TODO! */ -+ acx_sem_unlock(adev); -+ FLUSH_SCHEDULED_WORK(); -+ acx_sem_lock(adev); -+ -+ /* This is possible: -+ ** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task -> -+ ** -> set_status(ASSOCIATED) -> wake_queue() -+ ** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK -+ ** lock/unlock is just paranoia, maybe not needed */ -+ acx_lock(adev, flags); -+ acx_stop_queue(ndev, "on ifdown"); -+ acx_set_status(adev, ACX_STATUS_0_STOPPED); -+ acx_unlock(adev, flags); -+ -+ /* kernel/timer.c says it's illegal to del_timer_sync() -+ ** a timer which restarts itself. We guarantee this cannot -+ ** ever happen because acx_i_timer() never does this if -+ ** status is ACX_STATUS_0_STOPPED */ -+ del_timer_sync(&adev->mgmt_timer); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_e_open -+** -+** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP -+** from clear to set. In other words: ifconfig up. -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxpci_e_open(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ int result = OK; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ acx_init_task_scheduler(adev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D0); ? */ -+ -+ /* request shared IRQ handler */ -+ if (request_irq(ndev->irq, acxpci_i_interrupt, SA_SHIRQ, ndev->name, ndev)) { -+ printk("%s: request_irq FAILED\n", ndev->name); -+ result = -EAGAIN; -+ goto done; -+ } -+ log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq); -+ -+ /* ifup device */ -+ acxpci_s_up(ndev); -+ -+ /* We don't currently have to do anything else. -+ * The setup of the MAC should be subsequently completed via -+ * the mlme commands. -+ * Higher layers know we're ready from dev->start==1 and -+ * dev->tbusy==0. Our rx path knows to pass up received/ -+ * frames because of dev->flags&IFF_UP is true. -+ */ -+done: -+ acx_sem_unlock(adev); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxpci_e_close -+** -+** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP -+** from set to clear. I.e. called by "ifconfig DEV down" -+** -+** Returns: -+** 0 success -+** >0 f/w reported error -+** <0 driver reported error -+*/ -+static int -+acxpci_e_close(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* ifdown device */ -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ if (netif_device_present(ndev)) { -+ acxpci_s_down(ndev); -+ } -+ -+ /* disable all IRQs, release shared IRQ handler */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ write_reg16(adev, IO_ACX_FEMR, 0x0); -+ free_irq(ndev->irq, ndev); -+ -+/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */ -+ -+ /* We currently don't have to do anything else. -+ * Higher layers know we're not ready from dev->start==0 and -+ * dev->tbusy==1. Our rx path knows to not pass up received -+ * frames because of dev->flags&IFF_UP is false. -+ */ -+ acx_sem_unlock(adev); -+ -+ log(L_INIT, "closed device\n"); -+ FN_EXIT0; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acxpci_i_tx_timeout -+** -+** Called from network core. Must not sleep! -+*/ -+static void -+acxpci_i_tx_timeout(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ unsigned int tx_num_cleaned; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* clean processed tx descs, they may have been completely full */ -+ tx_num_cleaned = acxpci_l_clean_txdesc(adev); -+ -+ /* nothing cleaned, yet (almost) no free buffers available? -+ * --> clean all tx descs, no matter which status!! -+ * Note that I strongly suspect that doing emergency cleaning -+ * may confuse the firmware. This is a last ditch effort to get -+ * ANYTHING to work again... -+ * -+ * TODO: it's best to simply reset & reinit hw from scratch... -+ */ -+ if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) { -+ printk("%s: FAILED to free any of the many full tx buffers. " -+ "Switching to emergency freeing. " -+ "Please report!\n", ndev->name); -+ acxpci_l_clean_txdesc_emergency(adev); -+ } -+ -+ if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status)) -+ acx_wake_queue(ndev, "after tx timeout"); -+ -+ /* stall may have happened due to radio drift, so recalib radio */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ -+ /* do unimportant work last */ -+ printk("%s: tx timeout!\n", ndev->name); -+ adev->stats.tx_errors++; -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_i_set_multicast_list -+** FIXME: most likely needs refinement -+*/ -+static void -+acxpci_i_set_multicast_list(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ -+ /* firmwares don't have allmulti capability, -+ * so just use promiscuous mode instead in this case. */ -+ if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) { -+ SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ /* let kernel know in case *we* needed to set promiscuous */ -+ ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI); -+ } else { -+ CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); -+ SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); -+ SET_BIT(adev->set_mask, SET_RXCONFIG); -+ ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI); -+ } -+ -+ /* cannot update card settings directly here, atomic context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); -+ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxpci_l_process_rxdesc -+** -+** Called directly and only from the IRQ handler -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_rxbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_rxbuffer(const acx_device_t *adev) -+{ -+ register const struct rxhostdesc *rxhostdesc; -+ int i; -+ /* no FN_ENTER here, we don't want that */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ if (unlikely(!rxhostdesc)) return; -+ for (i = 0; i < RX_CNT; i++) { -+ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) -+ printk("rx: buf %d full\n", i); -+ rxhostdesc++; -+ } -+} -+#endif -+ -+static void -+acxpci_l_process_rxdesc(acx_device_t *adev) -+{ -+ register rxhostdesc_t *hostdesc; -+ unsigned count, tail; -+ -+ FN_ENTER; -+ -+ if (unlikely(acx_debug & L_BUFR)) -+ log_rxbuffer(adev); -+ -+ /* First, have a loop to determine the first descriptor that's -+ * full, just in case there's a mismatch between our current -+ * rx_tail and the full descriptor we're supposed to handle. */ -+ tail = adev->rx_tail; -+ count = RX_CNT; -+ while (1) { -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ /* advance tail regardless of outcome of the below test */ -+ tail = (tail + 1) % RX_CNT; -+ -+ if ((hostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ && (hostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) -+ break; /* found it! */ -+ -+ if (unlikely(!--count)) /* hmm, no luck: all descs empty, bail out */ -+ goto end; -+ } -+ -+ /* now process descriptors, starting with the first we figured out */ -+ while (1) { -+ log(L_BUFR, "rx: tail=%u Ctl_16=%04X Status=%08X\n", -+ tail, hostdesc->Ctl_16, hostdesc->Status); -+ -+ acx_l_process_rxbuf(adev, hostdesc->data); -+ -+ hostdesc->Status = 0; -+ /* flush all writes before adapter sees CTL_HOSTOWN change */ -+ wmb(); -+ /* Host no longer owns this, needs to be LAST */ -+ CLEAR_BIT(hostdesc->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); -+ -+ /* ok, descriptor is handled, now check the next descriptor */ -+ hostdesc = &adev->rxhostdesc_start[tail]; -+ -+ /* if next descriptor is empty, then bail out */ -+ if (!(hostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ || !(hostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) -+ break; -+ -+ tail = (tail + 1) % RX_CNT; -+ } -+end: -+ adev->rx_tail = tail; -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_i_interrupt -+** -+** IRQ handler (atomic context, must not sleep, blah, blah) -+*/ -+ -+/* scan is complete. all frames now on the receive queue are valid */ -+#define INFO_SCAN_COMPLETE 0x0001 -+#define INFO_WEP_KEY_NOT_FOUND 0x0002 -+/* hw has been reset as the result of a watchdog timer timeout */ -+#define INFO_WATCH_DOG_RESET 0x0003 -+/* failed to send out NULL frame from PS mode notification to AP */ -+/* recommended action: try entering 802.11 PS mode again */ -+#define INFO_PS_FAIL 0x0004 -+/* encryption/decryption process on a packet failed */ -+#define INFO_IV_ICV_FAILURE 0x0005 -+ -+/* Info mailbox format: -+2 bytes: type -+2 bytes: status -+more bytes may follow -+ rumors say about status: -+ 0x0000 info available (set by hw) -+ 0x0001 information received (must be set by host) -+ 0x1000 info available, mailbox overflowed (messages lost) (set by hw) -+ but in practice we've seen: -+ 0x9000 when we did not set status to 0x0001 on prev message -+ 0x1001 when we did set it -+ 0x0000 was never seen -+ conclusion: this is really a bitfield: -+ 0x1000 is 'info available' bit -+ 'mailbox overflowed' bit is 0x8000, not 0x1000 -+ value of 0x0000 probably means that there are no messages at all -+ P.S. I dunno how in hell hw is supposed to notice that messages are lost - -+ it does NOT clear bit 0x0001, and this bit will probably stay forever set -+ after we set it once. Let's hope this will be fixed in firmware someday -+*/ -+ -+static void -+handle_info_irq(acx_device_t *adev) -+{ -+#if ACX_DEBUG -+ static const char * const info_type_msg[] = { -+ "(unknown)", -+ "scan complete", -+ "WEP key not found", -+ "internal watchdog reset was done", -+ "failed to send powersave (NULL frame) notification to AP", -+ "encrypt/decrypt on a packet has failed", -+ "TKIP tx keys disabled", -+ "TKIP rx keys disabled", -+ "TKIP rx: key ID not found", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "???", -+ "TKIP IV value exceeds thresh" -+ }; -+#endif -+ u32 info_type, info_status; -+ -+ info_type = readl(adev->info_area); -+ info_status = (info_type >> 16); -+ info_type = (u16)info_type; -+ -+ /* inform fw that we have read this info message */ -+ writel(info_type | 0x00010000, adev->info_area); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK); -+ write_flush(adev); -+ -+ log(L_CTL, "info_type:%04X info_status:%04X\n", -+ info_type, info_status); -+ -+ log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n", -+ info_status, info_type, -+ info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ? -+ 0 : info_type] -+ ); -+} -+ -+ -+static void -+log_unusual_irq(u16 irqtype) { -+ /* -+ if (!printk_ratelimit()) -+ return; -+ */ -+ -+ printk("acx: got"); -+ if (irqtype & HOST_INT_RX_DATA) { -+ printk(" Rx_Data"); -+ } -+ /* HOST_INT_TX_COMPLETE */ -+ if (irqtype & HOST_INT_TX_XFER) { -+ printk(" Tx_Xfer"); -+ } -+ /* HOST_INT_RX_COMPLETE */ -+ if (irqtype & HOST_INT_DTIM) { -+ printk(" DTIM"); -+ } -+ if (irqtype & HOST_INT_BEACON) { -+ printk(" Beacon"); -+ } -+ if (irqtype & HOST_INT_TIMER) { -+ log(L_IRQ, " Timer"); -+ } -+ if (irqtype & HOST_INT_KEY_NOT_FOUND) { -+ printk(" Key_Not_Found"); -+ } -+ if (irqtype & HOST_INT_IV_ICV_FAILURE) { -+ printk(" IV_ICV_Failure (crypto)"); -+ } -+ /* HOST_INT_CMD_COMPLETE */ -+ /* HOST_INT_INFO */ -+ if (irqtype & HOST_INT_OVERFLOW) { -+ printk(" Overflow"); -+ } -+ if (irqtype & HOST_INT_PROCESS_ERROR) { -+ printk(" Process_Error"); -+ } -+ /* HOST_INT_SCAN_COMPLETE */ -+ if (irqtype & HOST_INT_FCS_THRESHOLD) { -+ printk(" FCS_Threshold"); -+ } -+ if (irqtype & HOST_INT_UNKNOWN) { -+ printk(" Unknown"); -+ } -+ printk(" IRQ(s)\n"); -+} -+ -+ -+static void -+update_link_quality_led(acx_device_t *adev) -+{ -+ int qual; -+ -+ qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise); -+ if (qual > adev->brange_max_quality) -+ qual = adev->brange_max_quality; -+ -+ if (time_after(jiffies, adev->brange_time_last_state_change + -+ (HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) { -+ acxpci_l_power_led(adev, (adev->brange_last_state == 0)); -+ adev->brange_last_state ^= 1; /* toggle */ -+ adev->brange_time_last_state_change = jiffies; -+ } -+} -+ -+ -+#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* a la orinoco.c */ -+ -+static irqreturn_t -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+acxpci_i_interrupt(int irq, void *dev_id) -+#else -+acxpci_i_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+#endif -+{ -+ acx_device_t *adev; -+ unsigned long flags; -+ unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY; -+ register u16 irqtype; -+ u16 unmasked; -+ -+ adev = ndev2adev((struct net_device*)dev_id); -+ -+ /* LOCKING: can just spin_lock() since IRQs are disabled anyway. -+ * I am paranoid */ -+ acx_lock(adev, flags); -+ -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ if (unlikely(0xffff == unmasked)) { -+ /* 0xffff value hints at missing hardware, -+ * so don't do anything. -+ * Not very clean, but other drivers do the same... */ -+ log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n"); -+ goto none; -+ } -+ -+ /* We will check only "interesting" IRQ types */ -+ irqtype = unmasked & ~adev->irq_mask; -+ if (!irqtype) { -+ /* We are on a shared IRQ line and it wasn't our IRQ */ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n", -+ unmasked, adev->irq_mask); -+ goto none; -+ } -+ -+ /* Done here because IRQ_NONEs taking three lines of log -+ ** drive me crazy */ -+ FN_ENTER; -+ -+#define IRQ_ITERATE 1 -+#if IRQ_ITERATE -+if (jiffies != adev->irq_last_jiffies) { -+ adev->irq_loops_this_jiffy = 0; -+ adev->irq_last_jiffies = jiffies; -+} -+ -+/* safety condition; we'll normally abort loop below -+ * in case no IRQ type occurred */ -+while (likely(--irqcount)) { -+#endif -+ /* ACK all IRQs ASAP */ -+ write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff); -+ -+ log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n", -+ unmasked, adev->irq_mask, irqtype); -+ -+ /* Handle most important IRQ types first */ -+ if (irqtype & HOST_INT_RX_COMPLETE) { -+ log(L_IRQ, "got Rx_Complete IRQ\n"); -+ acxpci_l_process_rxdesc(adev); -+ } -+ if (irqtype & HOST_INT_TX_COMPLETE) { -+ log(L_IRQ, "got Tx_Complete IRQ\n"); -+ /* don't clean up on each Tx complete, wait a bit -+ * unless we're going towards full, in which case -+ * we do it immediately, too (otherwise we might lockup -+ * with a full Tx buffer if we go into -+ * acxpci_l_clean_txdesc() at a time when we won't wakeup -+ * the net queue in there for some reason...) */ -+ if (adev->tx_free <= TX_START_CLEAN) { -+#if TX_CLEANUP_IN_SOFTIRQ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP); -+#else -+ acxpci_l_clean_txdesc(adev); -+#endif -+ } -+ } -+ -+ /* Less frequent ones */ -+ if (irqtype & (0 -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ | HOST_INT_SCAN_COMPLETE -+ )) { -+ if (irqtype & HOST_INT_CMD_COMPLETE) { -+ log(L_IRQ, "got Command_Complete IRQ\n"); -+ /* save the state for the running issue_cmd() */ -+ SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE); -+ } -+ if (irqtype & HOST_INT_INFO) { -+ handle_info_irq(adev); -+ } -+ if (irqtype & HOST_INT_SCAN_COMPLETE) { -+ log(L_IRQ, "got Scan_Complete IRQ\n"); -+ /* need to do that in process context */ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN); -+ /* remember that fw is not scanning anymore */ -+ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); -+ } -+ } -+ -+ /* These we just log, but either they happen rarely -+ * or we keep them masked out */ -+ if (irqtype & (0 -+ | HOST_INT_RX_DATA -+ /* | HOST_INT_TX_COMPLETE */ -+ | HOST_INT_TX_XFER -+ /* | HOST_INT_RX_COMPLETE */ -+ | HOST_INT_DTIM -+ | HOST_INT_BEACON -+ | HOST_INT_TIMER -+ | HOST_INT_KEY_NOT_FOUND -+ | HOST_INT_IV_ICV_FAILURE -+ /* | HOST_INT_CMD_COMPLETE */ -+ /* | HOST_INT_INFO */ -+ | HOST_INT_OVERFLOW -+ | HOST_INT_PROCESS_ERROR -+ /* | HOST_INT_SCAN_COMPLETE */ -+ | HOST_INT_FCS_THRESHOLD -+ | HOST_INT_UNKNOWN -+ )) { -+ log_unusual_irq(irqtype); -+ } -+ -+#if IRQ_ITERATE -+ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); -+ irqtype = unmasked & ~adev->irq_mask; -+ /* Bail out if no new IRQ bits or if all are masked out */ -+ if (!irqtype) -+ break; -+ -+ if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) { -+ printk(KERN_ERR "acx: too many interrupts per jiffy!\n"); -+ /* Looks like card floods us with IRQs! Try to stop that */ -+ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); -+ /* This will short-circuit all future attempts to handle IRQ. -+ * We cant do much more... */ -+ adev->irq_mask = 0; -+ break; -+ } -+} -+#endif -+ /* Routine to perform blink with range */ -+ if (unlikely(adev->led_power == 2)) -+ update_link_quality_led(adev); -+ -+/* handled: */ -+ /* write_flush(adev); - not needed, last op was read anyway */ -+ acx_unlock(adev, flags); -+ FN_EXIT0; -+ return IRQ_HANDLED; -+ -+none: -+ acx_unlock(adev, flags); -+ return IRQ_NONE; -+} -+ -+ -+/*********************************************************************** -+** acxpci_l_power_led -+*/ -+void -+acxpci_l_power_led(acx_device_t *adev, int enable) -+{ -+ u16 gpio_pled = IS_ACX111(adev) ? 0x0040 : 0x0800; -+ -+ /* A hack. Not moving message rate limiting to adev->xxx -+ * (it's only a debug message after all) */ -+ static int rate_limit = 0; -+ -+ if (rate_limit++ < 3) -+ log(L_IOCTL, "Please report in case toggling the power " -+ "LED doesn't work for your card!\n"); -+ if (enable) -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled); -+ else -+ write_reg16(adev, IO_ACX_GPIO_OUT, -+ read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled); -+} -+ -+ -+/*********************************************************************** -+** Ioctls -+*/ -+ -+/*********************************************************************** -+*/ -+int -+acx111pci_ioctl_info( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+#if ACX_DEBUG > 1 -+ acx_device_t *adev = ndev2adev(ndev); -+ rxdesc_t *rxdesc; -+ txdesc_t *txdesc; -+ rxhostdesc_t *rxhostdesc; -+ txhostdesc_t *txhostdesc; -+ struct acx111_ie_memoryconfig memconf; -+ struct acx111_ie_queueconfig queueconf; -+ unsigned long flags; -+ int i; -+ char memmap[0x34]; -+ char rxconfig[0x8]; -+ char fcserror[0x8]; -+ char ratefallback[0x5]; -+ -+ if ( !(acx_debug & (L_IOCTL|L_DEBUG)) ) -+ return OK; -+ /* using printk() since we checked debug flag already */ -+ -+ acx_sem_lock(adev); -+ -+ if (!IS_ACX111(adev)) { -+ printk("acx111-specific function called " -+ "with non-acx111 chip, aborting\n"); -+ goto end_ok; -+ } -+ -+ /* get Acx111 Memory Configuration */ -+ memset(&memconf, 0, sizeof(memconf)); -+ /* BTW, fails with 12 (Write only) error code. -+ ** Retained for easy testing of issue_cmd error handling :) */ -+ acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG); -+ -+ /* get Acx111 Queue Configuration */ -+ memset(&queueconf, 0, sizeof(queueconf)); -+ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); -+ -+ /* get Acx111 Memory Map */ -+ memset(memmap, 0, sizeof(memmap)); -+ acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP); -+ -+ /* get Acx111 Rx Config */ -+ memset(rxconfig, 0, sizeof(rxconfig)); -+ acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG); -+ -+ /* get Acx111 fcs error count */ -+ memset(fcserror, 0, sizeof(fcserror)); -+ acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT); -+ -+ /* get Acx111 rate fallback */ -+ memset(ratefallback, 0, sizeof(ratefallback)); -+ acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK); -+ -+ /* force occurrence of a beacon interrupt */ -+ /* TODO: comment why is this necessary */ -+ write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON); -+ -+ /* dump Acx111 Mem Configuration */ -+ printk("dump mem config:\n" -+ "data read: %d, struct size: %d\n" -+ "Number of stations: %1X\n" -+ "Memory block size: %1X\n" -+ "tx/rx memory block allocation: %1X\n" -+ "count rx: %X / tx: %X queues\n" -+ "options %1X\n" -+ "fragmentation %1X\n" -+ "Rx Queue 1 Count Descriptors: %X\n" -+ "Rx Queue 1 Host Memory Start: %X\n" -+ "Tx Queue 1 Count Descriptors: %X\n" -+ "Tx Queue 1 Attributes: %X\n", -+ memconf.len, (int) sizeof(memconf), -+ memconf.no_of_stations, -+ memconf.memory_block_size, -+ memconf.tx_rx_memory_block_allocation, -+ memconf.count_rx_queues, memconf.count_tx_queues, -+ memconf.options, -+ memconf.fragmentation, -+ memconf.rx_queue1_count_descs, -+ acx2cpu(memconf.rx_queue1_host_rx_start), -+ memconf.tx_queue1_count_descs, -+ memconf.tx_queue1_attributes); -+ -+ /* dump Acx111 Queue Configuration */ -+ printk("dump queue head:\n" -+ "data read: %d, struct size: %d\n" -+ "tx_memory_block_address (from card): %X\n" -+ "rx_memory_block_address (from card): %X\n" -+ "rx1_queue address (from card): %X\n" -+ "tx1_queue address (from card): %X\n" -+ "tx1_queue attributes (from card): %X\n", -+ queueconf.len, (int) sizeof(queueconf), -+ queueconf.tx_memory_block_address, -+ queueconf.rx_memory_block_address, -+ queueconf.rx1_queue_address, -+ queueconf.tx1_queue_address, -+ queueconf.tx1_attributes); -+ -+ /* dump Acx111 Mem Map */ -+ printk("dump mem map:\n" -+ "data read: %d, struct size: %d\n" -+ "Code start: %X\n" -+ "Code end: %X\n" -+ "WEP default key start: %X\n" -+ "WEP default key end: %X\n" -+ "STA table start: %X\n" -+ "STA table end: %X\n" -+ "Packet template start: %X\n" -+ "Packet template end: %X\n" -+ "Queue memory start: %X\n" -+ "Queue memory end: %X\n" -+ "Packet memory pool start: %X\n" -+ "Packet memory pool end: %X\n" -+ "iobase: %p\n" -+ "iobase2: %p\n", -+ *((u16 *)&memmap[0x02]), (int) sizeof(memmap), -+ *((u32 *)&memmap[0x04]), -+ *((u32 *)&memmap[0x08]), -+ *((u32 *)&memmap[0x0C]), -+ *((u32 *)&memmap[0x10]), -+ *((u32 *)&memmap[0x14]), -+ *((u32 *)&memmap[0x18]), -+ *((u32 *)&memmap[0x1C]), -+ *((u32 *)&memmap[0x20]), -+ *((u32 *)&memmap[0x24]), -+ *((u32 *)&memmap[0x28]), -+ *((u32 *)&memmap[0x2C]), -+ *((u32 *)&memmap[0x30]), -+ adev->iobase, -+ adev->iobase2); -+ -+ /* dump Acx111 Rx Config */ -+ printk("dump rx config:\n" -+ "data read: %d, struct size: %d\n" -+ "rx config: %X\n" -+ "rx filter config: %X\n", -+ *((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig), -+ *((u16 *)&rxconfig[0x04]), -+ *((u16 *)&rxconfig[0x06])); -+ -+ /* dump Acx111 fcs error */ -+ printk("dump fcserror:\n" -+ "data read: %d, struct size: %d\n" -+ "fcserrors: %X\n", -+ *((u16 *)&fcserror[0x02]), (int) sizeof(fcserror), -+ *((u32 *)&fcserror[0x04])); -+ -+ /* dump Acx111 rate fallback */ -+ printk("dump rate fallback:\n" -+ "data read: %d, struct size: %d\n" -+ "ratefallback: %X\n", -+ *((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback), -+ *((u8 *)&ratefallback[0x04])); -+ -+ /* protect against IRQ */ -+ acx_lock(adev, flags); -+ -+ /* dump acx111 internal rx descriptor ring buffer */ -+ rxdesc = adev->rxdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump internal rxdesc %d:\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n" -+ "RxStatus (dynamic) 0x%X\n" -+ "Mod/Pre (dynamic) 0x%X\n", -+ i, -+ rxdesc, -+ acx2cpu(rxdesc->pNextDesc), -+ acx2cpu(rxdesc->ACXMemPtr), -+ rxdesc->Ctl_8, -+ rxdesc->rate, -+ rxdesc->error, -+ rxdesc->SNR); -+ rxdesc++; -+ } -+ -+ /* dump host rx descriptor ring buffer */ -+ -+ rxhostdesc = adev->rxhostdesc_start; -+ -+ /* loop over complete receive pool */ -+ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { -+ printk("\ndump host rxdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ rxhostdesc, -+ acx2cpu(rxhostdesc->data_phy), -+ rxhostdesc->data_offset, -+ le16_to_cpu(rxhostdesc->Ctl_16), -+ le16_to_cpu(rxhostdesc->length), -+ acx2cpu(rxhostdesc->desc_phy_next), -+ rxhostdesc->Status); -+ rxhostdesc++; -+ } -+ -+ /* dump acx111 internal tx descriptor ring buffer */ -+ txdesc = adev->txdesc_start; -+ -+ /* loop over complete transmit pool */ -+ if (txdesc) for (i = 0; i < TX_CNT; i++) { -+ printk("\ndump internal txdesc %d:\n" -+ "size 0x%X\n" -+ "mem pos %p\n" -+ "next 0x%X\n" -+ "acx mem pointer (dynamic) 0x%X\n" -+ "host mem pointer (dynamic) 0x%X\n" -+ "length (dynamic) 0x%X\n" -+ "CTL (dynamic) 0x%X\n" -+ "CTL2 (dynamic) 0x%X\n" -+ "Status (dynamic) 0x%X\n" -+ "Rate (dynamic) 0x%X\n", -+ i, -+ (int) sizeof(struct txdesc), -+ txdesc, -+ acx2cpu(txdesc->pNextDesc), -+ acx2cpu(txdesc->AcxMemPtr), -+ acx2cpu(txdesc->HostMemPtr), -+ le16_to_cpu(txdesc->total_length), -+ txdesc->Ctl_8, -+ txdesc->Ctl2_8, txdesc->error, -+ txdesc->u.r1.rate); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ -+ /* dump host tx descriptor ring buffer */ -+ -+ txhostdesc = adev->txhostdesc_start; -+ -+ /* loop over complete host send pool */ -+ if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) { -+ printk("\ndump host txdesc %d:\n" -+ "mem pos %p\n" -+ "buffer mem pos 0x%X\n" -+ "buffer mem offset 0x%X\n" -+ "CTL 0x%X\n" -+ "Length 0x%X\n" -+ "next 0x%X\n" -+ "Status 0x%X\n", -+ i, -+ txhostdesc, -+ acx2cpu(txhostdesc->data_phy), -+ txhostdesc->data_offset, -+ le16_to_cpu(txhostdesc->Ctl_16), -+ le16_to_cpu(txhostdesc->length), -+ acx2cpu(txhostdesc->desc_phy_next), -+ le32_to_cpu(txhostdesc->Status)); -+ txhostdesc++; -+ } -+ -+ /* write_reg16(adev, 0xb4, 0x4); */ -+ -+ acx_unlock(adev, flags); -+end_ok: -+ -+ acx_sem_unlock(adev); -+#endif /* ACX_DEBUG */ -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100pci_ioctl_set_phy_amp_bias( -+ struct net_device *ndev, -+ struct iw_request_info *info, -+ struct iw_param *vwrq, -+ char *extra) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ u16 gpio_old; -+ -+ if (!IS_ACX100(adev)) { -+ /* WARNING!!! -+ * Removing this check *might* damage -+ * hardware, since we're tweaking GPIOs here after all!!! -+ * You've been warned... -+ * WARNING!!! */ -+ printk("acx: sorry, setting bias level for non-acx100 " -+ "is not supported yet\n"); -+ return OK; -+ } -+ -+ if (*extra > 7) { -+ printk("acx: invalid bias parameter, range is 0-7\n"); -+ return -EINVAL; -+ } -+ -+ acx_sem_lock(adev); -+ -+ /* Need to lock accesses to [IO_ACX_GPIO_OUT]: -+ * IRQ handler uses it to update LED */ -+ acx_lock(adev, flags); -+ gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT); -+ write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8)); -+ acx_unlock(adev, flags); -+ -+ log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old); -+ printk("%s: PHY power amplifier bias: old:%d, new:%d\n", -+ ndev->name, -+ (gpio_old & 0x0700) >> 8, (unsigned char)*extra); -+ -+ acx_sem_unlock(adev); -+ -+ return OK; -+} -+ -+ -+/*************************************************************** -+** acxpci_l_alloc_tx -+** Actually returns a txdesc_t* ptr -+** -+** FIXME: in case of fragments, should allocate multiple descrs -+** after figuring out how many we need and whether we still have -+** sufficiently many. -+*/ -+tx_t* -+acxpci_l_alloc_tx(acx_device_t *adev) -+{ -+ struct txdesc *txdesc; -+ unsigned head; -+ u8 ctl8; -+ -+ FN_ENTER; -+ -+ if (unlikely(!adev->tx_free)) { -+ printk("acx: BUG: no free txdesc left\n"); -+ txdesc = NULL; -+ goto end; -+ } -+ -+ head = adev->tx_head; -+ txdesc = get_txdesc(adev, head); -+ ctl8 = txdesc->Ctl_8; -+ -+ /* 2005-10-11: there were several bug reports on this happening -+ ** but now cause seems to be understood & fixed */ -+ if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_ACXDONE_HOSTOWN))) { -+ /* whoops, descr at current index is not free, so probably -+ * ring buffer already full */ -+ printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find " -+ "free txdesc\n", head, ctl8); -+ txdesc = NULL; -+ goto end; -+ } -+ -+ /* Needed in case txdesc won't be eventually submitted for tx */ -+ txdesc->Ctl_8 = DESC_CTL_ACXDONE_HOSTOWN; -+ -+ adev->tx_free--; -+ log(L_BUFT, "tx: got desc %u, %u remain\n", -+ head, adev->tx_free); -+ /* Keep a few free descs between head and tail of tx ring. -+ ** It is not absolutely needed, just feels safer */ -+ if (adev->tx_free < TX_STOP_QUEUE) { -+ log(L_BUF, "stop queue (%u tx desc left)\n", -+ adev->tx_free); -+ acx_stop_queue(adev->ndev, NULL); -+ } -+ -+ /* returning current descriptor, so advance to next free one */ -+ adev->tx_head = (head + 1) % TX_CNT; -+end: -+ FN_EXIT0; -+ -+ return (tx_t*)txdesc; -+} -+ -+ -+/*********************************************************************** -+*/ -+void* -+acxpci_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) -+{ -+ return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data; -+} -+ -+ -+/*********************************************************************** -+** acxpci_l_tx_data -+** -+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). -+** Can be called from acx_i_start_xmit (data frames from net core). -+** -+** FIXME: in case of fragments, should loop over the number of -+** pre-allocated tx descrs, properly setting up transfer data and -+** CTL_xxx flags according to fragment number. -+*/ -+void -+acxpci_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len) -+{ -+ txdesc_t *txdesc = (txdesc_t*)tx_opaque; -+ txhostdesc_t *hostdesc1, *hostdesc2; -+ client_t *clt; -+ u16 rate_cur; -+ u8 Ctl_8, Ctl2_8; -+ -+ FN_ENTER; -+ -+ /* fw doesn't tx such packets anyhow */ -+ if (unlikely(len < WLAN_HDR_A3_LEN)) -+ goto end; -+ -+ hostdesc1 = get_txhostdesc(adev, txdesc); -+ /* modify flag status in separate variable to be able to write it back -+ * in one big swoop later (also in order to have less device memory -+ * accesses) */ -+ Ctl_8 = txdesc->Ctl_8; -+ Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */ -+ -+ hostdesc2 = hostdesc1 + 1; -+ -+ /* DON'T simply set Ctl field to 0 here globally, -+ * it needs to maintain a consistent flag status (those are state flags!!), -+ * otherwise it may lead to severe disruption. Only set or reset particular -+ * flags at the exact moment this is needed... */ -+ -+ /* let chip do RTS/CTS handshaking before sending -+ * in case packet size exceeds threshold */ -+ if (len > adev->rts_threshold) -+ SET_BIT(Ctl2_8, DESC_CTL2_RTS); -+ else -+ CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS); -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1); -+ break; -+ case ACX_MODE_2_STA: -+ clt = adev->ap_client; -+ break; -+#if 0 -+/* testing was done on acx111: */ -+ case ACX_MODE_MONITOR: -+ SET_BIT(Ctl2_8, 0 -+/* sends CTS to self before packet */ -+ + DESC_CTL2_SEQ /* don't increase sequence field */ -+/* not working (looks like good fcs is still added) */ -+ + DESC_CTL2_FCS /* don't add the FCS */ -+/* not tested */ -+ + DESC_CTL2_MORE_FRAG -+/* not tested */ -+ + DESC_CTL2_RETRY /* don't increase retry field */ -+/* not tested */ -+ + DESC_CTL2_POWER /* don't increase power mgmt. field */ -+/* no effect */ -+ + DESC_CTL2_WEP /* encrypt this frame */ -+/* not tested */ -+ + DESC_CTL2_DUR /* don't increase duration field */ -+ ); -+ /* fallthrough */ -+#endif -+ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ -+ clt = NULL; -+ break; -+ } -+ -+ rate_cur = clt ? clt->rate_cur : adev->rate_bcast; -+ if (unlikely(!rate_cur)) { -+ printk("acx: driver bug! bad ratemask\n"); -+ goto end; -+ } -+ -+ /* used in tx cleanup routine for auto rate and accounting: */ -+ put_txcr(adev, txdesc, clt, rate_cur); -+ -+ txdesc->total_length = cpu_to_le16(len); -+ hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN); -+ if (IS_ACX111(adev)) { -+ /* note that if !txdesc->do_auto, txrate->cur -+ ** has only one nonzero bit */ -+ txdesc->u.r2.rate111 = cpu_to_le16( -+ rate_cur -+ /* WARNING: I was never able to make it work with prism54 AP. -+ ** It was falling down to 1Mbit where shortpre is not applicable, -+ ** and not working at all at "5,11 basic rates only" setting. -+ ** I even didn't see tx packets in radio packet capture. -+ ** Disabled for now --vda */ -+ /*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */ -+ ); -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ /* should add this to rate111 above as necessary */ -+ | (clt->pbcc511 ? RATE111_PBCC511 : 0) -+#endif -+ hostdesc1->length = cpu_to_le16(len); -+ } else { /* ACX100 */ -+ u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100; -+ txdesc->u.r1.rate = rate_100; -+#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS -+ if (clt->pbcc511) { -+ if (n == RATE100_5 || n == RATE100_11) -+ n |= RATE100_PBCC511; -+ } -+ -+ if (clt->shortpre && (clt->cur != RATE111_1)) -+ SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */ -+#endif -+ /* set autodma and reclaim and 1st mpdu */ -+ SET_BIT(Ctl_8, DESC_CTL_AUTODMA | DESC_CTL_RECLAIM | DESC_CTL_FIRSTFRAG); -+#if ACX_FRAGMENTATION -+ /* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */ -+#endif -+ hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN); -+ } -+ /* don't need to clean ack/rts statistics here, already -+ * done on descr cleanup */ -+ -+ /* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors -+ * are now owned by the acx100; do this as LAST operation */ -+ CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN); -+ /* flush writes before we release hostdesc to the adapter here */ -+ wmb(); -+ CLEAR_BIT(hostdesc1->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); -+ CLEAR_BIT(hostdesc2->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); -+ -+ /* write back modified flags */ -+ txdesc->Ctl2_8 = Ctl2_8; -+ txdesc->Ctl_8 = Ctl_8; -+ /* unused: txdesc->tx_time = cpu_to_le32(jiffies); */ -+ -+ /* flush writes before we tell the adapter that it's its turn now */ -+ mmiowb(); -+ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); -+ write_flush(adev); -+ -+ /* log the packet content AFTER sending it, -+ * in order to not delay sending any further than absolutely needed -+ * Do separate logs for acx100/111 to have human-readable rates */ -+ if (unlikely(acx_debug & (L_XFER|L_DATA))) { -+ u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc; -+ if (IS_ACX111(adev)) -+ printk("tx: pkt (%s): len %d " -+ "rate %04X%s status %u\n", -+ acx_get_packet_type_string(le16_to_cpu(fc)), len, -+ le16_to_cpu(txdesc->u.r2.rate111), -+ (le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "", -+ adev->status); -+ else -+ printk("tx: pkt (%s): len %d rate %03u%s status %u\n", -+ acx_get_packet_type_string(fc), len, -+ txdesc->u.r1.rate, -+ (Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "", -+ adev->status); -+ -+ if (acx_debug & L_DATA) { -+ printk("tx: 802.11 [%d]: ", len); -+ acx_dump_bytes(hostdesc1->data, len); -+ } -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_l_clean_txdesc -+** -+** This function resets the txdescs' status when the ACX100 -+** signals the TX done IRQ (txdescs have been processed), starting with -+** the pool index of the descriptor which we would use next, -+** in order to make sure that we can be as fast as possible -+** in filling new txdescs. -+** Everytime we get called we know where the next packet to be cleaned is. -+*/ -+ -+#if !ACX_DEBUG -+static inline void log_txbuffer(const acx_device_t *adev) {} -+#else -+static void -+log_txbuffer(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ -+ /* no FN_ENTER here, we don't want that */ -+ /* no locks here, since it's entirely non-critical code */ -+ txdesc = adev->txdesc_start; -+ if (unlikely(!txdesc)) return; -+ printk("tx: desc->Ctl8's:"); -+ for (i = 0; i < TX_CNT; i++) { -+ printk(" %02X", txdesc->Ctl_8); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ printk("\n"); -+} -+#endif -+ -+ -+static void -+handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger) -+{ -+ const char *err = "unknown error"; -+ -+ /* hmm, should we handle this as a mask -+ * of *several* bits? -+ * For now I think only caring about -+ * individual bits is ok... */ -+ switch (error) { -+ case 0x01: -+ err = "no Tx due to error in other fragment"; -+ adev->wstats.discard.fragment++; -+ break; -+ case 0x02: -+ err = "Tx aborted"; -+ adev->stats.tx_aborted_errors++; -+ break; -+ case 0x04: -+ err = "Tx desc wrong parameters"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x08: -+ err = "WEP key not found"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x10: -+ err = "MSDU lifetime timeout? - try changing " -+ "'iwconfig retry lifetime XXX'"; -+ adev->wstats.discard.misc++; -+ break; -+ case 0x20: -+ err = "excessive Tx retries due to either distance " -+ "too high or unable to Tx or Tx frame error - " -+ "try changing 'iwconfig txpower XXX' or " -+ "'sens'itivity or 'retry'"; -+ adev->wstats.discard.retries++; -+ /* Tx error 0x20 also seems to occur on -+ * overheating, so I'm not sure whether we -+ * actually want to do aggressive radio recalibration, -+ * since people maybe won't notice then that their hardware -+ * is slowly getting cooked... -+ * Or is it still a safe long distance from utter -+ * radio non-functionality despite many radio recalibs -+ * to final destructive overheating of the hardware? -+ * In this case we really should do recalib here... -+ * I guess the only way to find out is to do a -+ * potentially fatal self-experiment :-\ -+ * Or maybe only recalib in case we're using Tx -+ * rate auto (on errors switching to lower speed -+ * --> less heat?) or 802.11 power save mode? -+ * -+ * ok, just do it. */ -+ if (++adev->retry_errors_msg_ratelimit % 4 == 0) { -+ if (adev->retry_errors_msg_ratelimit <= 20) { -+ printk("%s: several excessive Tx " -+ "retry errors occurred, attempting " -+ "to recalibrate radio. Radio " -+ "drift might be caused by increasing " -+ "card temperature, please check the card " -+ "before it's too late!\n", -+ adev->ndev->name); -+ if (adev->retry_errors_msg_ratelimit == 20) -+ printk("disabling above message\n"); -+ } -+ -+ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); -+ } -+ break; -+ case 0x40: -+ err = "Tx buffer overflow"; -+ adev->stats.tx_fifo_errors++; -+ break; -+ case 0x80: -+ /* possibly ACPI C-state powersaving related!!! -+ * (DMA timeout due to excessively high wakeup -+ * latency after C-state activation!?) -+ * Disable C-State powersaving and try again, -+ * then PLEASE REPORT, I'm VERY interested in -+ * whether my theory is correct that this is -+ * actually the problem here. -+ * In that case, use new Linux idle wakeup latency -+ * requirements kernel API to prevent this issue. */ -+ err = "DMA error"; -+ adev->wstats.discard.misc++; -+ break; -+ } -+ adev->stats.tx_errors++; -+ if (adev->stats.tx_errors <= 20) -+ printk("%s: tx error 0x%02X, buf %02u! (%s)\n", -+ adev->ndev->name, error, finger, err); -+ else -+ printk("%s: tx error 0x%02X, buf %02u!\n", -+ adev->ndev->name, error, finger); -+} -+ -+ -+unsigned int -+acxpci_l_clean_txdesc(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ unsigned finger; -+ int num_cleaned; -+ u16 r111; -+ u8 error, ack_failures, rts_failures, rts_ok, r100; -+ -+ FN_ENTER; -+ -+ if (unlikely(acx_debug & L_DEBUG)) -+ log_txbuffer(adev); -+ -+ log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail); -+ -+ /* We know first descr which is not free yet. We advance it as far -+ ** as we see correct bits set in following descs (if next desc -+ ** is NOT free, we shouldn't advance at all). We know that in -+ ** front of tx_tail may be "holes" with isolated free descs. -+ ** We will catch up when all intermediate descs will be freed also */ -+ -+ finger = adev->tx_tail; -+ num_cleaned = 0; -+ while (likely(finger != adev->tx_head)) { -+ txdesc = get_txdesc(adev, finger); -+ -+ /* If we allocated txdesc on tx path but then decided -+ ** to NOT use it, then it will be left as a free "bubble" -+ ** in the "allocated for tx" part of the ring. -+ ** We may meet it on the next ring pass here. */ -+ -+ /* stop if not marked as "tx finished" and "host owned" */ -+ if ((txdesc->Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN) -+ != DESC_CTL_ACXDONE_HOSTOWN) { -+ if (unlikely(!num_cleaned)) { /* maybe remove completely */ -+ log(L_BUFT, "clean_txdesc: tail isn't free. " -+ "tail:%d head:%d\n", -+ adev->tx_tail, adev->tx_head); -+ } -+ break; -+ } -+ -+ /* remember desc values... */ -+ error = txdesc->error; -+ ack_failures = txdesc->ack_failures; -+ rts_failures = txdesc->rts_failures; -+ rts_ok = txdesc->rts_ok; -+ r100 = txdesc->u.r1.rate; -+ r111 = le16_to_cpu(txdesc->u.r2.rate111); -+ -+ /* need to check for certain error conditions before we -+ * clean the descriptor: we still need valid descr data here */ -+ if (unlikely(0x30 & error)) { -+ /* only send IWEVTXDROP in case of retry or lifetime exceeded; -+ * all other errors mean we screwed up locally */ -+ union iwreq_data wrqu; -+ wlan_hdr_t *hdr; -+ txhostdesc_t *hostdesc; -+ -+ hostdesc = get_txhostdesc(adev, txdesc); -+ hdr = (wlan_hdr_t *)hostdesc->data; -+ MAC_COPY(wrqu.addr.sa_data, hdr->a1); -+ wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL); -+ } -+ -+ /* ...and free the desc */ -+ txdesc->error = 0; -+ txdesc->ack_failures = 0; -+ txdesc->rts_failures = 0; -+ txdesc->rts_ok = 0; -+ /* signal host owning it LAST, since ACX already knows that this -+ ** descriptor is finished since it set Ctl_8 accordingly. */ -+ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; -+ -+ adev->tx_free++; -+ num_cleaned++; -+ -+ if ((adev->tx_free >= TX_START_QUEUE) -+ && (adev->status == ACX_STATUS_4_ASSOCIATED) -+ && (acx_queue_stopped(adev->ndev)) -+ ) { -+ log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n", -+ adev->tx_free); -+ acx_wake_queue(adev->ndev, NULL); -+ } -+ -+ /* do error checking, rate handling and logging -+ * AFTER having done the work, it's faster */ -+ -+ /* do rate handling */ -+ if (adev->rate_auto) { -+ struct client *clt = get_txc(adev, txdesc); -+ if (clt) { -+ u16 cur = get_txr(adev, txdesc); -+ if (clt->rate_cur == cur) { -+ acx_l_handle_txrate_auto(adev, clt, -+ cur, /* intended rate */ -+ r100, r111, /* actually used rate */ -+ (error & 0x30), /* was there an error? */ -+ TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free); -+ } -+ } -+ } -+ -+ if (unlikely(error)) -+ handle_tx_error(adev, error, finger); -+ -+ if (IS_ACX111(adev)) -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n", -+ finger, ack_failures, rts_failures, rts_ok, r111); -+ else -+ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n", -+ finger, ack_failures, rts_failures, rts_ok, r100); -+ -+ /* update pointer for descr to be cleaned next */ -+ finger = (finger + 1) % TX_CNT; -+ } -+ -+ /* remember last position */ -+ adev->tx_tail = finger; -+/* end: */ -+ FN_EXIT1(num_cleaned); -+ return num_cleaned; -+} -+ -+/* clean *all* Tx descriptors, and regardless of their previous state. -+ * Used for brute-force reset handling. */ -+void -+acxpci_l_clean_txdesc_emergency(acx_device_t *adev) -+{ -+ txdesc_t *txdesc; -+ int i; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc = get_txdesc(adev, i); -+ -+ /* free it */ -+ txdesc->ack_failures = 0; -+ txdesc->rts_failures = 0; -+ txdesc->rts_ok = 0; -+ txdesc->error = 0; -+ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; -+ } -+ -+ adev->tx_free = TX_CNT; -+ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxpci_s_create_tx_host_desc_queue -+*/ -+ -+static void* -+allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg) -+{ -+ void *ptr; -+ -+ ptr = dma_alloc_coherent(adev->pdev ? &adev->pdev->dev : NULL, -+ size, phy, GFP_KERNEL); -+ -+ if (ptr) { -+ log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n", -+ msg, (int)size, ptr, (unsigned long long)*phy); -+ memset(ptr, 0, size); -+ return ptr; -+ } -+ printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n", -+ msg, (int)size); -+ return NULL; -+} -+ -+ -+static int -+acxpci_s_create_tx_host_desc_queue(acx_device_t *adev) -+{ -+ txhostdesc_t *hostdesc; -+ u8 *txbuf; -+ dma_addr_t hostdesc_phy; -+ dma_addr_t txbuf_phy; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate TX buffer */ -+ adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS; -+ adev->txbuf_start = allocate(adev, adev->txbuf_area_size, -+ &adev->txbuf_startphy, "txbuf_start"); -+ if (!adev->txbuf_start) -+ goto fail; -+ -+ /* allocate the TX host descriptor queue pool */ -+ adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc); -+ adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size, -+ &adev->txhostdesc_startphy, "txhostdesc_start"); -+ if (!adev->txhostdesc_start) -+ goto fail; -+ /* check for proper alignment of TX host descriptor pool */ -+ if ((long) adev->txhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ hostdesc = adev->txhostdesc_start; -+ hostdesc_phy = adev->txhostdesc_startphy; -+ txbuf = adev->txbuf_start; -+ txbuf_phy = adev->txbuf_startphy; -+ -+#if 0 -+/* Each tx buffer is accessed by hardware via -+** txdesc -> txhostdesc(s) -> txbuffer(s). -+** We use only one txhostdesc per txdesc, but it looks like -+** acx111 is buggy: it accesses second txhostdesc -+** (via hostdesc.desc_phy_next field) even if -+** txdesc->length == hostdesc->length and thus -+** entire packet was placed into first txhostdesc. -+** Due to this bug acx111 hangs unless second txhostdesc -+** has le16_to_cpu(hostdesc.length) = 3 (or larger) -+** Storing NULL into hostdesc.desc_phy_next -+** doesn't seem to help. -+** -+** Update: although it worked on Xterasys XN-2522g -+** with len=3 trick, WG311v2 is even more bogus, doesn't work. -+** Keeping this code (#ifdef'ed out) for documentational purposes. -+*/ -+ for (i = 0; i < TX_CNT*2; i++) { -+ hostdesc_phy += sizeof(*hostdesc); -+ if (!(i & 1)) { -+ hostdesc->data_phy = cpu2acx(txbuf_phy); -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); -+ /* hostdesc->length = ... */ -+ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); -+ hostdesc->pNext = ptr2acx(NULL); -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ hostdesc->data = txbuf; -+ -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS; -+ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS; -+ } else { -+ /* hostdesc->data_phy = ... */ -+ /* hostdesc->data_offset = ... */ -+ /* hostdesc->reserved = ... */ -+ /* hostdesc->Ctl_16 = ... */ -+ hostdesc->length = cpu_to_le16(3); /* bug workaround */ -+ /* hostdesc->desc_phy_next = ... */ -+ /* hostdesc->pNext = ... */ -+ /* hostdesc->Status = ... */ -+ /* below: non-hardware fields */ -+ /* hostdesc->data = ... */ -+ } -+ hostdesc++; -+ } -+#endif -+/* We initialize two hostdescs so that they point to adjacent -+** memory areas. Thus txbuf is really just a contiguous memory area */ -+ for (i = 0; i < TX_CNT*2; i++) { -+ hostdesc_phy += sizeof(*hostdesc); -+ -+ hostdesc->data_phy = cpu2acx(txbuf_phy); -+ /* done by memset(0): hostdesc->data_offset = 0; */ -+ /* hostdesc->reserved = ... */ -+ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); -+ /* hostdesc->length = ... */ -+ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); -+ /* done by memset(0): hostdesc->pNext = ptr2acx(NULL); */ -+ /* hostdesc->Status = ... */ -+ /* ->data is a non-hardware field: */ -+ hostdesc->data = txbuf; -+ -+ if (!(i & 1)) { -+ txbuf += WLAN_HDR_A3_LEN; -+ txbuf_phy += WLAN_HDR_A3_LEN; -+ } else { -+ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; -+ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; -+ } -+ hostdesc++; -+ } -+ hostdesc--; -+ hostdesc->desc_phy_next = cpu2acx(adev->txhostdesc_startphy); -+ -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_tx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxpci_s_create_rx_host_desc_queue -+*/ -+/* the whole size of a data buffer (header plus data body) -+ * plus 32 bytes safety offset at the end */ -+#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32) -+ -+static int -+acxpci_s_create_rx_host_desc_queue(acx_device_t *adev) -+{ -+ rxhostdesc_t *hostdesc; -+ rxbuffer_t *rxbuf; -+ dma_addr_t hostdesc_phy; -+ dma_addr_t rxbuf_phy; -+ int i; -+ -+ FN_ENTER; -+ -+ /* allocate the RX host descriptor queue pool */ -+ adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc); -+ adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size, -+ &adev->rxhostdesc_startphy, "rxhostdesc_start"); -+ if (!adev->rxhostdesc_start) -+ goto fail; -+ /* check for proper alignment of RX host descriptor pool */ -+ if ((long) adev->rxhostdesc_start & 3) { -+ printk("acx: driver bug: dma alloc returns unaligned address\n"); -+ goto fail; -+ } -+ -+ /* allocate Rx buffer pool which will be used by the acx -+ * to store the whole content of the received frames in it */ -+ adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE; -+ adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size, -+ &adev->rxbuf_startphy, "rxbuf_start"); -+ if (!adev->rxbuf_start) -+ goto fail; -+ -+ rxbuf = adev->rxbuf_start; -+ rxbuf_phy = adev->rxbuf_startphy; -+ hostdesc = adev->rxhostdesc_start; -+ hostdesc_phy = adev->rxhostdesc_startphy; -+ -+ /* don't make any popular C programming pointer arithmetic mistakes -+ * here, otherwise I'll kill you... -+ * (and don't dare asking me why I'm warning you about that...) */ -+ for (i = 0; i < RX_CNT; i++) { -+ hostdesc->data = rxbuf; -+ hostdesc->data_phy = cpu2acx(rxbuf_phy); -+ hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE); -+ CLEAR_BIT(hostdesc->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); -+ rxbuf++; -+ rxbuf_phy += sizeof(*rxbuf); -+ hostdesc_phy += sizeof(*hostdesc); -+ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); -+ hostdesc++; -+ } -+ hostdesc--; -+ hostdesc->desc_phy_next = cpu2acx(adev->rxhostdesc_startphy); -+ FN_EXIT1(OK); -+ return OK; -+fail: -+ printk("acx: create_rx_host_desc_queue FAILED\n"); -+ /* dealloc will be done by free function on error case */ -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*************************************************************** -+** acxpci_s_create_hostdesc_queues -+*/ -+int -+acxpci_s_create_hostdesc_queues(acx_device_t *adev) -+{ -+ int result; -+ result = acxpci_s_create_tx_host_desc_queue(adev); -+ if (OK != result) return result; -+ result = acxpci_s_create_rx_host_desc_queue(adev); -+ return result; -+} -+ -+ -+/*************************************************************** -+** acxpci_create_tx_desc_queue -+*/ -+static void -+acxpci_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start) -+{ -+ txdesc_t *txdesc; -+ txhostdesc_t *hostdesc; -+ dma_addr_t hostmemptr; -+ u32 mem_offs; -+ int i; -+ -+ FN_ENTER; -+ -+ if (IS_ACX100(adev)) -+ adev->txdesc_size = sizeof(*txdesc); -+ else -+ /* the acx111 txdesc is 4 bytes larger */ -+ adev->txdesc_size = sizeof(*txdesc) + 4; -+ -+ adev->txdesc_start = (txdesc_t *) (adev->iobase2 + tx_queue_start); -+ -+ log(L_DEBUG, "adev->iobase2=%p\n" -+ "tx_queue_start=%08X\n" -+ "adev->txdesc_start=%p\n", -+ adev->iobase2, -+ tx_queue_start, -+ adev->txdesc_start); -+ -+ adev->tx_free = TX_CNT; -+ /* done by memset: adev->tx_head = 0; */ -+ /* done by memset: adev->tx_tail = 0; */ -+ txdesc = adev->txdesc_start; -+ mem_offs = tx_queue_start; -+ hostmemptr = adev->txhostdesc_startphy; -+ hostdesc = adev->txhostdesc_start; -+ -+ if (IS_ACX111(adev)) { -+ /* ACX111 has a preinitialized Tx buffer! */ -+ /* loop over whole send pool */ -+ /* FIXME: do we have to do the hostmemptr stuff here?? */ -+ for (i = 0; i < TX_CNT; i++) { -+ txdesc->HostMemPtr = ptr2acx(hostmemptr); -+ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; -+ /* reserve two (hdr desc and payload desc) */ -+ hostdesc += 2; -+ hostmemptr += 2 * sizeof(*hostdesc); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ } else { -+ /* ACX100 Tx buffer needs to be initialized by us */ -+ /* clear whole send pool. sizeof is safe here (we are acx100) */ -+ memset(adev->txdesc_start, 0, TX_CNT * sizeof(*txdesc)); -+ -+ /* loop over whole send pool */ -+ for (i = 0; i < TX_CNT; i++) { -+ log(L_DEBUG, "configure card tx descriptor: 0x%p, " -+ "size: 0x%X\n", txdesc, adev->txdesc_size); -+ -+ /* pointer to hostdesc memory */ -+ txdesc->HostMemPtr = ptr2acx(hostmemptr); -+ /* initialise ctl */ -+ txdesc->Ctl_8 = ( DESC_CTL_HOSTOWN | DESC_CTL_RECLAIM -+ | DESC_CTL_AUTODMA | DESC_CTL_FIRSTFRAG); -+ /* done by memset(0): txdesc->Ctl2_8 = 0; */ -+ /* point to next txdesc */ -+ txdesc->pNextDesc = cpu2acx(mem_offs + adev->txdesc_size); -+ /* reserve two (hdr desc and payload desc) */ -+ hostdesc += 2; -+ hostmemptr += 2 * sizeof(*hostdesc); -+ /* go to the next one */ -+ mem_offs += adev->txdesc_size; -+ /* ++ is safe here (we are acx100) */ -+ txdesc++; -+ } -+ /* go back to the last one */ -+ txdesc--; -+ /* and point to the first making it a ring buffer */ -+ txdesc->pNextDesc = cpu2acx(tx_queue_start); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxpci_create_rx_desc_queue -+*/ -+static void -+acxpci_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start) -+{ -+ rxdesc_t *rxdesc; -+ u32 mem_offs; -+ int i; -+ -+ FN_ENTER; -+ -+ /* done by memset: adev->rx_tail = 0; */ -+ -+ /* ACX111 doesn't need any further config: preconfigures itself. -+ * Simply print ring buffer for debugging */ -+ if (IS_ACX111(adev)) { -+ /* rxdesc_start already set here */ -+ -+ adev->rxdesc_start = (rxdesc_t *) ((u8 *)adev->iobase2 + rx_queue_start); -+ -+ rxdesc = adev->rxdesc_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc); -+ rxdesc = adev->rxdesc_start = (rxdesc_t *) -+ (adev->iobase2 + acx2cpu(rxdesc->pNextDesc)); -+ } -+ } else { -+ /* we didn't pre-calculate rxdesc_start in case of ACX100 */ -+ /* rxdesc_start should be right AFTER Tx pool */ -+ adev->rxdesc_start = (rxdesc_t *) -+ ((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t))); -+ /* NB: sizeof(txdesc_t) above is valid because we know -+ ** we are in if (acx100) block. Beware of cut-n-pasting elsewhere! -+ ** acx111's txdesc is larger! */ -+ -+ memset(adev->rxdesc_start, 0, RX_CNT * sizeof(*rxdesc)); -+ -+ /* loop over whole receive pool */ -+ rxdesc = adev->rxdesc_start; -+ mem_offs = rx_queue_start; -+ for (i = 0; i < RX_CNT; i++) { -+ log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc); -+ rxdesc->Ctl_8 = DESC_CTL_RECLAIM | DESC_CTL_AUTODMA; -+ /* point to next rxdesc */ -+ rxdesc->pNextDesc = cpu2acx(mem_offs + sizeof(*rxdesc)); -+ /* go to the next one */ -+ mem_offs += sizeof(*rxdesc); -+ rxdesc++; -+ } -+ /* go to the last one */ -+ rxdesc--; -+ -+ /* and point to the first making it a ring buffer */ -+ rxdesc->pNextDesc = cpu2acx(rx_queue_start); -+ } -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxpci_create_desc_queues -+*/ -+void -+acxpci_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start) -+{ -+ acxpci_create_tx_desc_queue(adev, tx_queue_start); -+ acxpci_create_rx_desc_queue(adev, rx_queue_start); -+} -+ -+ -+/*************************************************************** -+** acxpci_s_proc_diag_output -+*/ -+char* -+acxpci_s_proc_diag_output(char *p, acx_device_t *adev) -+{ -+ const char *rtl, *thd, *ttl; -+ rxhostdesc_t *rxhostdesc; -+ txdesc_t *txdesc; -+ int i; -+ -+ FN_ENTER; -+ -+ p += sprintf(p, "** Rx buf **\n"); -+ rxhostdesc = adev->rxhostdesc_start; -+ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { -+ rtl = (i == adev->rx_tail) ? " [tail]" : ""; -+ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) -+ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)) ) -+ p += sprintf(p, "%02u FULL%s\n", i, rtl); -+ else -+ p += sprintf(p, "%02u empty%s\n", i, rtl); -+ rxhostdesc++; -+ } -+ p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free, -+ acx_queue_stopped(adev->ndev) ? "STOPPED" : "running"); -+ txdesc = adev->txdesc_start; -+ if (txdesc) for (i = 0; i < TX_CNT; i++) { -+ thd = (i == adev->tx_head) ? " [head]" : ""; -+ ttl = (i == adev->tx_tail) ? " [tail]" : ""; -+ if (txdesc->Ctl_8 & DESC_CTL_ACXDONE) -+ p += sprintf(p, "%02u free (%02X)%s%s\n", i, txdesc->Ctl_8, thd, ttl); -+ else -+ p += sprintf(p, "%02u tx (%02X)%s%s\n", i, txdesc->Ctl_8, thd, ttl); -+ txdesc = advance_txdesc(adev, txdesc, 1); -+ } -+ p += sprintf(p, -+ "\n" -+ "** PCI data **\n" -+ "txbuf_start %p, txbuf_area_size %u, txbuf_startphy %08llx\n" -+ "txdesc_size %u, txdesc_start %p\n" -+ "txhostdesc_start %p, txhostdesc_area_size %u, txhostdesc_startphy %08llx\n" -+ "rxdesc_start %p\n" -+ "rxhostdesc_start %p, rxhostdesc_area_size %u, rxhostdesc_startphy %08llx\n" -+ "rxbuf_start %p, rxbuf_area_size %u, rxbuf_startphy %08llx\n", -+ adev->txbuf_start, adev->txbuf_area_size, -+ (unsigned long long)adev->txbuf_startphy, -+ adev->txdesc_size, adev->txdesc_start, -+ adev->txhostdesc_start, adev->txhostdesc_area_size, -+ (unsigned long long)adev->txhostdesc_startphy, -+ adev->rxdesc_start, -+ adev->rxhostdesc_start, adev->rxhostdesc_area_size, -+ (unsigned long long)adev->rxhostdesc_startphy, -+ adev->rxbuf_start, adev->rxbuf_area_size, -+ (unsigned long long)adev->rxbuf_startphy); -+ -+ FN_EXIT0; -+ return p; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxpci_proc_eeprom_output(char *buf, acx_device_t *adev) -+{ -+ char *p = buf; -+ int i; -+ -+ FN_ENTER; -+ -+ for (i = 0; i < 0x400; i++) { -+ acxpci_read_eeprom_byte(adev, i, p++); -+ } -+ -+ FN_EXIT1(p - buf); -+ return p - buf; -+} -+ -+ -+/*********************************************************************** -+*/ -+void -+acxpci_set_interrupt_mask(acx_device_t *adev) -+{ -+ if (IS_ACX111(adev)) { -+ adev->irq_mask = (u16) ~(0 -+ /* | HOST_INT_RX_DATA */ -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ | HOST_INT_RX_COMPLETE -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ | HOST_INT_IV_ICV_FAILURE -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ /* | HOST_INT_OVERFLOW */ -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ | HOST_INT_FCS_THRESHOLD -+ /* | HOST_INT_UNKNOWN */ -+ ); -+ /* Or else acx100 won't signal cmd completion, right? */ -+ adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */ -+ } else { -+ adev->irq_mask = (u16) ~(0 -+ /* | HOST_INT_RX_DATA */ -+ | HOST_INT_TX_COMPLETE -+ /* | HOST_INT_TX_XFER */ -+ | HOST_INT_RX_COMPLETE -+ /* | HOST_INT_DTIM */ -+ /* | HOST_INT_BEACON */ -+ /* | HOST_INT_TIMER */ -+ /* | HOST_INT_KEY_NOT_FOUND */ -+ /* | HOST_INT_IV_ICV_FAILURE */ -+ | HOST_INT_CMD_COMPLETE -+ | HOST_INT_INFO -+ /* | HOST_INT_OVERFLOW */ -+ /* | HOST_INT_PROCESS_ERROR */ -+ | HOST_INT_SCAN_COMPLETE -+ /* | HOST_INT_FCS_THRESHOLD */ -+ /* | HOST_INT_UNKNOWN */ -+ ); -+ adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */ -+ } -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acx100pci_s_set_tx_level(acx_device_t *adev, u8 level_dbm) -+{ -+ /* since it can be assumed that at least the Maxim radio has a -+ * maximum power output of 20dBm and since it also can be -+ * assumed that these values drive the DAC responsible for -+ * setting the linear Tx level, I'd guess that these values -+ * should be the corresponding linear values for a dBm value, -+ * in other words: calculate the values from that formula: -+ * Y [dBm] = 10 * log (X [mW]) -+ * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm) -+ * and you're done... -+ * Hopefully that's ok, but you never know if we're actually -+ * right... (especially since Windows XP doesn't seem to show -+ * actual Tx dBm values :-P) */ -+ -+ /* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the -+ * values are EXACTLY mW!!! Not sure about RFMD and others, -+ * though... */ -+ static const u8 dbm2val_maxim[21] = { -+ 63, 63, 63, 62, -+ 61, 61, 60, 60, -+ 59, 58, 57, 55, -+ 53, 50, 47, 43, -+ 38, 31, 23, 13, -+ 0 -+ }; -+ static const u8 dbm2val_rfmd[21] = { -+ 0, 0, 0, 1, -+ 2, 2, 3, 3, -+ 4, 5, 6, 8, -+ 10, 13, 16, 20, -+ 25, 32, 41, 50, -+ 63 -+ }; -+ const u8 *table; -+ -+ switch (adev->radio_type) { -+ case RADIO_MAXIM_0D: -+ table = &dbm2val_maxim[0]; -+ break; -+ case RADIO_RFMD_11: -+ case RADIO_RALINK_15: -+ table = &dbm2val_rfmd[0]; -+ break; -+ default: -+ printk("%s: unknown/unsupported radio type, " -+ "cannot modify tx power level yet!\n", -+ adev->ndev->name); -+ return NOT_OK; -+ } -+ printk("%s: changing radio power level to %u dBm (%u)\n", -+ adev->ndev->name, level_dbm, table[level_dbm]); -+ acxpci_s_write_phy_reg(adev, 0x11, table[level_dbm]); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** Data for init_module/cleanup_module -+*/ -+static const struct pci_device_id -+acxpci_id_tbl[] __devinitdata = { -+ { -+ .vendor = PCI_VENDOR_ID_TI, -+ .device = PCI_DEVICE_ID_TI_TNETW1100A, -+ .subvendor = PCI_ANY_ID, -+ .subdevice = PCI_ANY_ID, -+ .driver_data = CHIPTYPE_ACX100, -+ }, -+ { -+ .vendor = PCI_VENDOR_ID_TI, -+ .device = PCI_DEVICE_ID_TI_TNETW1100B, -+ .subvendor = PCI_ANY_ID, -+ .subdevice = PCI_ANY_ID, -+ .driver_data = CHIPTYPE_ACX100, -+ }, -+ { -+ .vendor = PCI_VENDOR_ID_TI, -+ .device = PCI_DEVICE_ID_TI_TNETW1130, -+ .subvendor = PCI_ANY_ID, -+ .subdevice = PCI_ANY_ID, -+ .driver_data = CHIPTYPE_ACX111, -+ }, -+ { -+ .vendor = 0, -+ .device = 0, -+ .subvendor = 0, -+ .subdevice = 0, -+ .driver_data = 0, -+ } -+}; -+ -+MODULE_DEVICE_TABLE(pci, acxpci_id_tbl); -+ -+/* FIXME: checks should be removed once driver is included in the kernel */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 11) -+/* pci_name() got introduced at start of 2.6.x, -+ * got mandatory (slot_name member removed) in 2.6.11-bk1 */ -+#define pci_name(x) x->slot_name -+#endif -+ -+static struct pci_driver -+acxpci_drv_id = { -+ .name = "acx_pci", -+ .id_table = acxpci_id_tbl, -+ .probe = acxpci_e_probe, -+ .remove = __devexit_p(acxpci_e_remove), -+#ifdef CONFIG_PM -+ .suspend = acxpci_e_suspend, -+ .resume = acxpci_e_resume -+#endif /* CONFIG_PM */ -+}; -+ -+ -+/*********************************************************************** -+** acxpci_e_init_module -+** -+** Module initialization routine, called once at module load time -+*/ -+int __init -+acxpci_e_init_module(void) -+{ -+ int res; -+ -+ FN_ENTER; -+ -+#if (ACX_IO_WIDTH==32) -+ printk("acx: compiled to use 32bit I/O access. " -+ "I/O timing issues might occur, such as " -+ "non-working firmware upload. Report them\n"); -+#else -+ printk("acx: compiled to use 16bit I/O access only " -+ "(compatibility mode)\n"); -+#endif -+ -+#ifdef __LITTLE_ENDIAN -+#define ENDIANNESS_STRING "running on a little-endian CPU\n" -+#else -+#define ENDIANNESS_STRING "running on a BIG-ENDIAN CPU\n" -+#endif -+ log(L_INIT, -+ ENDIANNESS_STRING -+ "PCI module " ACX_RELEASE " initialized, " -+ "waiting for cards to probe...\n" -+ ); -+ -+ res = pci_register_driver(&acxpci_drv_id); -+ FN_EXIT1(res); -+ return res; -+} -+ -+ -+/*********************************************************************** -+** acxpci_e_cleanup_module -+** -+** Called at module unload time. This is our last chance to -+** clean up after ourselves. -+*/ -+void __exit -+acxpci_e_cleanup_module(void) -+{ -+ FN_ENTER; -+ -+ pci_unregister_driver(&acxpci_drv_id); -+ -+ FN_EXIT0; -+} -Index: linux-2.6.23/drivers/net/wireless/acx/rx3000_acx.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/rx3000_acx.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,110 @@ -+/* -+ * WLAN (TI TNETW1100B) support in the HP iPAQ RX3000 -+ * -+ * Copyright (c) 2006 SDG Systems, LLC -+ * Copyright (c) 2006 Roman Moravcik -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * Based on hx4700_acx.c -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx_hw.h" -+ -+extern struct platform_device s3c_device_asic3; -+ -+static int rx3000_wlan_start(void) -+{ -+ DPM_DEBUG("rx3000_acx: Turning on\n"); -+ asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, ASIC3_GPB3); -+ mdelay(20); -+ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC13, ASIC3_GPC13); -+ mdelay(20); -+ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC11, ASIC3_GPC11); -+ mdelay(100); -+ asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, ASIC3_GPB3); -+ mdelay(20); -+ s3c2410_gpio_cfgpin(S3C2410_GPA15, S3C2410_GPA15_nGCS4); -+ mdelay(100); -+ s3c2410_gpio_setpin(S3C2410_GPA11, 0); -+ mdelay(50); -+ s3c2410_gpio_setpin(S3C2410_GPA11, 1); -+ led_trigger_event_shared(rx3000_radio_trig, LED_FULL); -+ return 0; -+} -+ -+static int rx3000_wlan_stop(void) -+{ -+ DPM_DEBUG("rx3000_acx: Turning off\n"); -+ s3c2410_gpio_setpin(S3C2410_GPA15, 1); -+ s3c2410_gpio_cfgpin(S3C2410_GPA15, S3C2410_GPA15_OUT); -+ asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, 0); -+ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC13, 0); -+ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC11, 0); -+ led_trigger_event_shared(rx3000_radio_trig, LED_OFF); -+ return 0; -+} -+ -+static struct resource acx_resources[] = { -+ [0] = { -+ .start = RX3000_PA_WLAN, -+ .end = RX3000_PA_WLAN + 0x20, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = IRQ_EINT16, -+ .end = IRQ_EINT16, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct acx_hardware_data acx_data = { -+ .start_hw = rx3000_wlan_start, -+ .stop_hw = rx3000_wlan_stop, -+}; -+ -+static struct platform_device acx_device = { -+ .name = "acx-mem", -+ .dev = { -+ .platform_data = &acx_data, -+ }, -+ .num_resources = ARRAY_SIZE(acx_resources), -+ .resource = acx_resources, -+}; -+ -+static int __init rx3000_wlan_init(void) -+{ -+ printk("rx3000_wlan_init: acx-mem platform_device_register\n"); -+ return platform_device_register(&acx_device); -+} -+ -+ -+static void __exit rx3000_wlan_exit(void) -+{ -+ platform_device_unregister(&acx_device); -+} -+ -+module_init(rx3000_wlan_init); -+module_exit(rx3000_wlan_exit); -+ -+MODULE_AUTHOR("Todd Blumer , Roman Moravcik "); -+MODULE_DESCRIPTION("WLAN driver for HP iPAQ RX3000"); -+MODULE_LICENSE("GPL"); -+ -Index: linux-2.6.23/drivers/net/wireless/acx/setrate.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/setrate.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,213 @@ -+/* TODO: stop #including, move into wireless.c -+ * until then, keep in sync copies in prism54/ and acx/ dirs -+ * code+data size: less than 1k */ -+ -+enum { -+ DOT11_RATE_1, -+ DOT11_RATE_2, -+ DOT11_RATE_5, -+ DOT11_RATE_11, -+ DOT11_RATE_22, -+ DOT11_RATE_33, -+ DOT11_RATE_6, -+ DOT11_RATE_9, -+ DOT11_RATE_12, -+ DOT11_RATE_18, -+ DOT11_RATE_24, -+ DOT11_RATE_36, -+ DOT11_RATE_48, -+ DOT11_RATE_54 -+}; -+enum { -+ DOT11_MOD_DBPSK, -+ DOT11_MOD_DQPSK, -+ DOT11_MOD_CCK, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_CCKOFDM, -+ DOT11_MOD_PBCC -+}; -+static const u8 ratelist[] = { 1,2,5,11,22,33,6,9,12,18,24,36,48,54 }; -+static const u8 dot11ratebyte[] = { 1*2,2*2,11,11*2,22*2,33*2,6*2,9*2,12*2,18*2,24*2,36*2,48*2,54*2 }; -+static const u8 default_modulation[] = { -+ DOT11_MOD_DBPSK, -+ DOT11_MOD_DQPSK, -+ DOT11_MOD_CCK, -+ DOT11_MOD_CCK, -+ DOT11_MOD_PBCC, -+ DOT11_MOD_PBCC, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM, -+ DOT11_MOD_OFDM -+}; -+ -+static /* TODO: remove 'static' when moved to wireless.c */ -+int -+rate_mbit2enum(int n) { -+ int i=0; -+ while(i=DOT11_RATE_6) return DOT11_MOD_OFDM; */ -+ return default_modulation[r_enum]; -+ } -+ if(suffix=='c') { -+ if(r_enumDOT11_RATE_11) return -EINVAL; -+ return DOT11_MOD_CCK; -+ } -+ if(suffix=='p') { -+ if(r_enumDOT11_RATE_33) return -EINVAL; -+ return DOT11_MOD_PBCC; -+ } -+ if(suffix=='o') { -+ if(r_enumINT_MAX) return -EINVAL; -+ -+ rate_enum = rate_mbit2enum(rate_mbit); -+ if(rate_enum<0) return rate_enum; -+ -+ c = *str; -+ mod = get_modulation(rate_enum, c); -+ if(mod<0) return mod; -+ -+ if(c>='a' && c<='z') c = *++str; -+ if(c!=',' && c!=' ' && c!='\0') return -EINVAL; -+ -+ if(supported) { -+ int r = supported(rate_mbit, mod, opaque); -+ if(r) return r; -+ } -+ -+ *vector++ = dot11ratebyte[rate_enum] | or_mask; -+ -+ size--; -+ str++; -+ } while(size>0 && c==','); -+ -+ if(size<1) return -E2BIG; -+ *vector=0; /* TODO: sort, remove dups? */ -+ -+ *pstr = str-1; -+ return 0; -+} -+ -+static /* TODO: remove 'static' when moved to wireless.c */ -+int -+fill_ratevectors(const char *str, u8 *brate, u8 *orate, int size, -+ int (*supported)(int mbit, int mod, void *opaque), void *opaque) -+{ -+ int r; -+ -+ r = fill_ratevector(&str, brate, size, supported, opaque, 0x80); -+ if(r) return r; -+ -+ orate[0] = 0; -+ if(*str==' ') { -+ str++; -+ r = fill_ratevector(&str, orate, size, supported, opaque, 0); -+ if(r) return r; -+ /* TODO: sanitize, e.g. remove/error on rates already in basic rate set? */ -+ } -+ if(*str) -+ return -EINVAL; -+ -+ return 0; -+} -+#endif -+ -+/* TODO: use u64 masks? */ -+ -+static int -+fill_ratemask(const char **pstr, u32* mask, -+ int (*supported)(int mbit, int mod,void *opaque), -+ u32 (*gen_mask)(int mbit, int mod,void *opaque), -+ void *opaque) -+{ -+ unsigned long rate_mbit; -+ int rate_enum,mod; -+ u32 m = 0; -+ const char *str = *pstr; -+ char c; -+ -+ do { -+ rate_mbit = simple_strtoul(str, (char**)&str, 10); -+ if(rate_mbit>INT_MAX) return -EINVAL; -+ -+ rate_enum = rate_mbit2enum(rate_mbit); -+ if(rate_enum<0) return rate_enum; -+ -+ c = *str; -+ mod = get_modulation(rate_enum, c); -+ if(mod<0) return mod; -+ -+ if(c>='a' && c<='z') c = *++str; -+ if(c!=',' && c!=' ' && c!='\0') return -EINVAL; -+ -+ if(supported) { -+ int r = supported(rate_mbit, mod, opaque); -+ if(r) return r; -+ } -+ -+ m |= gen_mask(rate_mbit, mod, opaque); -+ str++; -+ } while(c==','); -+ -+ *pstr = str-1; -+ *mask |= m; -+ return 0; -+} -+ -+static /* TODO: remove 'static' when moved to wireless.c */ -+int -+fill_ratemasks(const char *str, u32 *bmask, u32 *omask, -+ int (*supported)(int mbit, int mod,void *opaque), -+ u32 (*gen_mask)(int mbit, int mod,void *opaque), -+ void *opaque) -+{ -+ int r; -+ -+ r = fill_ratemask(&str, bmask, supported, gen_mask, opaque); -+ if(r) return r; -+ -+ if(*str==' ') { -+ str++; -+ r = fill_ratemask(&str, omask, supported, gen_mask, opaque); -+ if(r) return r; -+ } -+ if(*str) -+ return -EINVAL; -+ return 0; -+} -Index: linux-2.6.23/drivers/net/wireless/acx/usb.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/usb.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,1922 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** USB support for TI ACX100 based devices. Many parts are taken from -+** the PCI driver. -+** -+** Authors: -+** Martin Wawro -+** Andreas Mohr -+** -+** LOCKING -+** callback functions called by USB core are running in interrupt context -+** and thus have names with _i_. -+*/ -+#define ACX_USB 1 -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "acx.h" -+ -+ -+/*********************************************************************** -+*/ -+/* number of endpoints of an interface */ -+#define NUM_EP(intf) (intf)->altsetting[0].desc.bNumEndpoints -+#define EP(intf, nr) (intf)->altsetting[0].endpoint[(nr)].desc -+#define GET_DEV(udev) usb_get_dev((udev)) -+#define PUT_DEV(udev) usb_put_dev((udev)) -+#define SET_NETDEV_OWNER(ndev, owner) /* not needed anymore ??? */ -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14) -+/* removed in 2.6.14. We will use fake value for now */ -+#define URB_ASYNC_UNLINK 0 -+#endif -+ -+ -+/*********************************************************************** -+*/ -+/* ACX100 (TNETW1100) USB device: D-Link DWL-120+ */ -+#define ACX100_VENDOR_ID 0x2001 -+#define ACX100_PRODUCT_ID_UNBOOTED 0x3B01 -+#define ACX100_PRODUCT_ID_BOOTED 0x3B00 -+ -+/* TNETW1450 USB devices */ -+#define VENDOR_ID_DLINK 0x07b8 /* D-Link Corp. */ -+#define PRODUCT_ID_WUG2400 0xb21a /* AboCom WUG2400 or SafeCom SWLUT-54125 */ -+#define VENDOR_ID_AVM_GMBH 0x057c -+#define PRODUCT_ID_AVM_WLAN_USB 0x5601 -+#define PRODUCT_ID_AVM_WLAN_USB_si 0x6201 /* "self install" named Version: driver kills kernel on inbound scans from fritz box ??? */ -+#define VENDOR_ID_ZCOM 0x0cde -+#define PRODUCT_ID_ZCOM_XG750 0x0017 /* not tested yet */ -+#define VENDOR_ID_TI 0x0451 -+#define PRODUCT_ID_TI_UNKNOWN 0x60c5 /* not tested yet */ -+ -+#define ACX_USB_CTRL_TIMEOUT 5500 /* steps in ms */ -+ -+/* Buffer size for fw upload, same for both ACX100 USB and TNETW1450 */ -+#define USB_RWMEM_MAXLEN 2048 -+ -+/* The number of bulk URBs to use */ -+#define ACX_TX_URB_CNT 8 -+#define ACX_RX_URB_CNT 2 -+ -+/* Should be sent to the bulkout endpoint */ -+#define ACX_USB_REQ_UPLOAD_FW 0x10 -+#define ACX_USB_REQ_ACK_CS 0x11 -+#define ACX_USB_REQ_CMD 0x12 -+ -+/*********************************************************************** -+** Prototypes -+*/ -+static int acxusb_e_probe(struct usb_interface *, const struct usb_device_id *); -+static void acxusb_e_disconnect(struct usb_interface *); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+static void acxusb_i_complete_tx(struct urb *); -+static void acxusb_i_complete_rx(struct urb *); -+#else -+static void acxusb_i_complete_tx(struct urb *, struct pt_regs *); -+static void acxusb_i_complete_rx(struct urb *, struct pt_regs *); -+#endif -+static int acxusb_e_open(struct net_device *); -+static int acxusb_e_close(struct net_device *); -+static void acxusb_i_set_rx_mode(struct net_device *); -+static int acxusb_boot(struct usb_device *, int is_tnetw1450, int *radio_type); -+ -+static void acxusb_l_poll_rx(acx_device_t *adev, usb_rx_t* rx); -+ -+static void acxusb_i_tx_timeout(struct net_device *); -+ -+/* static void dump_device(struct usb_device *); */ -+/* static void dump_device_descriptor(struct usb_device_descriptor *); */ -+/* static void dump_config_descriptor(struct usb_config_descriptor *); */ -+ -+/*********************************************************************** -+** Module Data -+*/ -+#define TXBUFSIZE sizeof(usb_txbuffer_t) -+/* -+ * Now, this is just plain lying, but the device insists in giving us -+ * huge packets. We supply extra space after rxbuffer. Need to understand -+ * it better... -+ */ -+#define RXBUFSIZE (sizeof(rxbuffer_t) + \ -+ (sizeof(usb_rx_t) - sizeof(struct usb_rx_plain))) -+ -+static const struct usb_device_id -+acxusb_ids[] = { -+ { USB_DEVICE(ACX100_VENDOR_ID, ACX100_PRODUCT_ID_BOOTED) }, -+ { USB_DEVICE(ACX100_VENDOR_ID, ACX100_PRODUCT_ID_UNBOOTED) }, -+ { USB_DEVICE(VENDOR_ID_DLINK, PRODUCT_ID_WUG2400) }, -+ { USB_DEVICE(VENDOR_ID_AVM_GMBH, PRODUCT_ID_AVM_WLAN_USB) }, -+ { USB_DEVICE(VENDOR_ID_AVM_GMBH, PRODUCT_ID_AVM_WLAN_USB_si) }, -+ { USB_DEVICE(VENDOR_ID_ZCOM, PRODUCT_ID_ZCOM_XG750) }, -+ { USB_DEVICE(VENDOR_ID_TI, PRODUCT_ID_TI_UNKNOWN) }, -+ {} -+}; -+ -+MODULE_DEVICE_TABLE(usb, acxusb_ids); -+ -+/* USB driver data structure as required by the kernel's USB core */ -+static struct usb_driver -+acxusb_driver = { -+ .name = "acx_usb", -+ .probe = acxusb_e_probe, -+ .disconnect = acxusb_e_disconnect, -+ .id_table = acxusb_ids -+}; -+ -+ -+/*********************************************************************** -+** USB helper -+** -+** ldd3 ch13 says: -+** When the function is usb_kill_urb, the urb lifecycle is stopped. This -+** function is usually used when the device is disconnected from the system, -+** in the disconnect callback. For some drivers, the usb_unlink_urb function -+** should be used to tell the USB core to stop an urb. This function does not -+** wait for the urb to be fully stopped before returning to the caller. -+** This is useful for stoppingthe urb while in an interrupt handler or when -+** a spinlock is held, as waiting for a urb to fully stop requires the ability -+** for the USB core to put the calling process to sleep. This function requires -+** that the URB_ASYNC_UNLINK flag value be set in the urb that is being asked -+** to be stopped in order to work properly. -+** -+** (URB_ASYNC_UNLINK is obsolete, usb_unlink_urb will always be -+** asynchronous while usb_kill_urb is synchronous and should be called -+** directly (drivers/usb/core/urb.c)) -+** -+** In light of this, timeout is just for paranoid reasons... -+* -+* Actually, it's useful for debugging. If we reach timeout, we're doing -+* something wrong with the urbs. -+*/ -+static void -+acxusb_unlink_urb(struct urb* urb) -+{ -+ if (!urb) -+ return; -+ -+ if (urb->status == -EINPROGRESS) { -+ int timeout = 10; -+ -+ usb_unlink_urb(urb); -+ while (--timeout && urb->status == -EINPROGRESS) { -+ mdelay(1); -+ } -+ if (!timeout) { -+ printk("acx_usb: urb unlink timeout!\n"); -+ } -+ } -+} -+ -+ -+/*********************************************************************** -+** EEPROM and PHY read/write helpers -+*/ -+/*********************************************************************** -+** acxusb_s_read_phy_reg -+*/ -+int -+acxusb_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) -+{ -+ /* mem_read_write_t mem; */ -+ -+ FN_ENTER; -+ -+ printk("%s doesn't seem to work yet, disabled.\n", __func__); -+ -+ /* -+ mem.addr = cpu_to_le16(reg); -+ mem.type = cpu_to_le16(0x82); -+ mem.len = cpu_to_le32(4); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_MEM_READ, &mem, sizeof(mem)); -+ *charbuf = mem.data; -+ log(L_DEBUG, "read radio PHY[0x%04X]=0x%02X\n", reg, *charbuf); -+ */ -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+*/ -+int -+acxusb_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) -+{ -+ mem_read_write_t mem; -+ -+ FN_ENTER; -+ -+ mem.addr = cpu_to_le16(reg); -+ mem.type = cpu_to_le16(0x82); -+ mem.len = cpu_to_le32(4); -+ mem.data = value; -+ acx_s_issue_cmd(adev, ACX1xx_CMD_MEM_WRITE, &mem, sizeof(mem)); -+ log(L_DEBUG, "write radio PHY[0x%04X]=0x%02X\n", reg, value); -+ -+ FN_EXIT1(OK); -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acxusb_s_issue_cmd_timeo -+** Excecutes a command in the command mailbox -+** -+** buffer = a pointer to the data. -+** The data must not include 4 byte command header -+*/ -+ -+/* TODO: ideally we shall always know how much we need -+** and this shall be 0 */ -+#define BOGUS_SAFETY_PADDING 0x40 -+ -+#undef FUNC -+#define FUNC "issue_cmd" -+ -+#if !ACX_DEBUG -+int -+acxusb_s_issue_cmd_timeo( -+ acx_device_t *adev, -+ unsigned cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned timeout) -+{ -+#else -+int -+acxusb_s_issue_cmd_timeo_debug( -+ acx_device_t *adev, -+ unsigned cmd, -+ void *buffer, -+ unsigned buflen, -+ unsigned timeout, -+ const char* cmdstr) -+{ -+#endif -+ /* USB ignores timeout param */ -+ -+ struct usb_device *usbdev; -+ struct { -+ u16 cmd; -+ u16 status; -+ u8 data[1]; -+ } ACX_PACKED *loc; -+ const char *devname; -+ int acklen, blocklen, inpipe, outpipe; -+ int cmd_status; -+ int result; -+ -+ FN_ENTER; -+ -+ devname = adev->ndev->name; -+ /* no "wlan%%d: ..." please */ -+ if (!devname || !devname[0] || devname[4]=='%') -+ devname = "acx"; -+ -+ log(L_CTL, FUNC"(cmd:%s,buflen:%u,type:0x%04X)\n", -+ cmdstr, buflen, -+ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); -+ -+ loc = kmalloc(buflen + 4 + BOGUS_SAFETY_PADDING, GFP_KERNEL); -+ if (!loc) { -+ printk("%s: "FUNC"(): no memory for data buffer\n", devname); -+ goto bad; -+ } -+ -+ /* get context from acx_device */ -+ usbdev = adev->usbdev; -+ -+ /* check which kind of command was issued */ -+ loc->cmd = cpu_to_le16(cmd); -+ loc->status = 0; -+ -+/* NB: buflen == frmlen + 4 -+** -+** Interrogate: write 8 bytes: (cmd,status,rid,frmlen), then -+** read (cmd,status,rid,frmlen,data[frmlen]) back -+** -+** Configure: write (cmd,status,rid,frmlen,data[frmlen]) -+** -+** Possibly bogus special handling of ACX1xx_IE_SCAN_STATUS removed -+*/ -+ -+ /* now write the parameters of the command if needed */ -+ acklen = buflen + 4 + BOGUS_SAFETY_PADDING; -+ blocklen = buflen; -+ if (buffer && buflen) { -+ /* if it's an INTERROGATE command, just pass the length -+ * of parameters to read, as data */ -+ if (cmd == ACX1xx_CMD_INTERROGATE) { -+ blocklen = 4; -+ acklen = buflen + 4; -+ } -+ memcpy(loc->data, buffer, blocklen); -+ } -+ blocklen += 4; /* account for cmd,status */ -+ -+ /* obtain the I/O pipes */ -+ outpipe = usb_sndctrlpipe(usbdev, 0); -+ inpipe = usb_rcvctrlpipe(usbdev, 0); -+ log(L_CTL, "ctrl inpipe=0x%X outpipe=0x%X\n", inpipe, outpipe); -+ log(L_CTL, "sending USB control msg (out) (blocklen=%d)\n", blocklen); -+ if (acx_debug & L_DATA) -+ acx_dump_bytes(loc, blocklen); -+ -+ result = usb_control_msg(usbdev, outpipe, -+ ACX_USB_REQ_CMD, /* request */ -+ USB_TYPE_VENDOR|USB_DIR_OUT, /* requesttype */ -+ 0, /* value */ -+ 0, /* index */ -+ loc, /* dataptr */ -+ blocklen, /* size */ -+ ACX_USB_CTRL_TIMEOUT /* timeout in ms */ -+ ); -+ -+ if (result == -ENODEV) { -+ log(L_CTL, "no device present (unplug?)\n"); -+ goto good; -+ } -+ -+ log(L_CTL, "wrote %d bytes\n", result); -+ if (result < 0) { -+ goto bad; -+ } -+ -+ /* check for device acknowledge */ -+ log(L_CTL, "sending USB control msg (in) (acklen=%d)\n", acklen); -+ loc->status = 0; /* delete old status flag -> set to IDLE */ -+ /* shall we zero out the rest? */ -+ result = usb_control_msg(usbdev, inpipe, -+ ACX_USB_REQ_CMD, /* request */ -+ USB_TYPE_VENDOR|USB_DIR_IN, /* requesttype */ -+ 0, /* value */ -+ 0, /* index */ -+ loc, /* dataptr */ -+ acklen, /* size */ -+ ACX_USB_CTRL_TIMEOUT /* timeout in ms */ -+ ); -+ if (result < 0) { -+ printk("%s: "FUNC"(): USB read error %d\n", devname, result); -+ goto bad; -+ } -+ if (acx_debug & L_CTL) { -+ printk("read %d bytes: ", result); -+ acx_dump_bytes(loc, result); -+ } -+ -+/* -+ check for result==buflen+4? Was seen: -+ -+interrogate(type:ACX100_IE_DOT11_ED_THRESHOLD,len:4) -+issue_cmd(cmd:ACX1xx_CMD_INTERROGATE,buflen:8,type:4111) -+ctrl inpipe=0x80000280 outpipe=0x80000200 -+sending USB control msg (out) (blocklen=8) -+01 00 00 00 0F 10 04 00 -+wrote 8 bytes -+sending USB control msg (in) (acklen=12) sizeof(loc->data -+read 4 bytes <==== MUST BE 12!! -+*/ -+ -+ cmd_status = le16_to_cpu(loc->status); -+ if (cmd_status != 1) { -+ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s)\n", -+ devname, cmd_status, acx_cmd_status_str(cmd_status)); -+ /* TODO: goto bad; ? */ -+ } -+ if ((cmd == ACX1xx_CMD_INTERROGATE) && buffer && buflen) { -+ memcpy(buffer, loc->data, buflen); -+ log(L_CTL, "response frame: cmd=0x%04X status=%d\n", -+ le16_to_cpu(loc->cmd), -+ cmd_status); -+ } -+good: -+ kfree(loc); -+ FN_EXIT1(OK); -+ return OK; -+bad: -+ /* Give enough info so that callers can avoid -+ ** printing their own diagnostic messages */ -+#if ACX_DEBUG -+ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); -+#else -+ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); -+#endif -+ dump_stack(); -+ kfree(loc); -+ FN_EXIT1(NOT_OK); -+ return NOT_OK; -+} -+ -+ -+/*********************************************************************** -+** acxusb_boot() -+** Inputs: -+** usbdev -> Pointer to kernel's usb_device structure -+** -+** Returns: -+** (int) Errorcode or 0 on success -+** -+** This function triggers the loading of the firmware image from harddisk -+** and then uploads the firmware to the USB device. After uploading the -+** firmware and transmitting the checksum, the device resets and appears -+** as a new device on the USB bus (the device we can finally deal with) -+*/ -+static inline int -+acxusb_fw_needs_padding(firmware_image_t *fw_image, unsigned int usb_maxlen) -+{ -+ unsigned int num_xfers = ((fw_image->size - 1) / usb_maxlen) + 1; -+ -+ return ((num_xfers % 2) == 0); -+} -+ -+static int -+acxusb_boot(struct usb_device *usbdev, int is_tnetw1450, int *radio_type) -+{ -+ char filename[sizeof("tiacx1NNusbcRR")]; -+ -+ firmware_image_t *fw_image = NULL; -+ char *usbbuf; -+ unsigned int offset; -+ unsigned int blk_len, inpipe, outpipe; -+ u32 num_processed; -+ u32 img_checksum, sum; -+ u32 file_size; -+ int result = -EIO; -+ int i; -+ -+ FN_ENTER; -+ -+ /* dump_device(usbdev); */ -+ -+ usbbuf = kmalloc(USB_RWMEM_MAXLEN, GFP_KERNEL); -+ if (!usbbuf) { -+ printk(KERN_ERR "acx: no memory for USB transfer buffer (%d bytes)\n", USB_RWMEM_MAXLEN); -+ result = -ENOMEM; -+ goto end; -+ } -+ if (is_tnetw1450) { -+ /* Obtain the I/O pipes */ -+ outpipe = usb_sndbulkpipe(usbdev, 1); -+ inpipe = usb_rcvbulkpipe(usbdev, 2); -+ -+ printk(KERN_DEBUG "wait for device ready\n"); -+ for (i = 0; i <= 2; i++) { -+ result = usb_bulk_msg(usbdev, inpipe, -+ usbbuf, -+ USB_RWMEM_MAXLEN, -+ &num_processed, -+ 2000 -+ ); -+ -+ if ((*(u32 *)&usbbuf[4] == 0x40000001) -+ && (*(u16 *)&usbbuf[2] == 0x1) -+ && ((*(u16 *)usbbuf & 0x3fff) == 0) -+ && ((*(u16 *)usbbuf & 0xc000) == 0xc000)) -+ break; -+ msleep(10); -+ } -+ if (i == 2) -+ goto fw_end; -+ -+ *radio_type = usbbuf[8]; -+ } else { -+ /* Obtain the I/O pipes */ -+ outpipe = usb_sndctrlpipe(usbdev, 0); -+ inpipe = usb_rcvctrlpipe(usbdev, 0); -+ -+ /* FIXME: shouldn't be hardcoded */ -+ *radio_type = RADIO_MAXIM_0D; -+ } -+ -+ snprintf(filename, sizeof(filename), "tiacx1%02dusbc%02X", -+ is_tnetw1450 * 11, *radio_type); -+ -+ fw_image = acx_s_read_fw(&usbdev->dev, filename, &file_size); -+ if (!fw_image) { -+ result = -EIO; -+ goto end; -+ } -+ log(L_INIT, "firmware size: %d bytes\n", file_size); -+ -+ img_checksum = le32_to_cpu(fw_image->chksum); -+ -+ if (is_tnetw1450) { -+ u8 cmdbuf[20]; -+ const u8 *p; -+ u8 need_padding; -+ u32 tmplen, val; -+ -+ memset(cmdbuf, 0, 16); -+ -+ need_padding = acxusb_fw_needs_padding(fw_image, USB_RWMEM_MAXLEN); -+ tmplen = need_padding ? file_size-4 : file_size-8; -+ *(u16 *)&cmdbuf[0] = 0xc000; -+ *(u16 *)&cmdbuf[2] = 0x000b; -+ *(u32 *)&cmdbuf[4] = tmplen; -+ *(u32 *)&cmdbuf[8] = file_size-8; -+ *(u32 *)&cmdbuf[12] = img_checksum; -+ -+ result = usb_bulk_msg(usbdev, outpipe, cmdbuf, 16, &num_processed, HZ); -+ if (result < 0) -+ goto fw_end; -+ -+ p = (const u8 *)&fw_image->size; -+ -+ /* first calculate checksum for image size part */ -+ sum = p[0]+p[1]+p[2]+p[3]; -+ p += 4; -+ -+ /* now continue checksum for firmware data part */ -+ tmplen = le32_to_cpu(fw_image->size); -+ for (i = 0; i < tmplen /* image size */; i++) { -+ sum += *p++; -+ } -+ -+ if (sum != le32_to_cpu(fw_image->chksum)) { -+ printk("acx: FATAL: firmware upload: " -+ "checksums don't match! " -+ "(0x%08x vs. 0x%08x)\n", -+ sum, fw_image->chksum); -+ goto fw_end; -+ } -+ -+ offset = 8; -+ while (offset < file_size) { -+ blk_len = file_size - offset; -+ if (blk_len > USB_RWMEM_MAXLEN) { -+ blk_len = USB_RWMEM_MAXLEN; -+ } -+ -+ log(L_INIT, "uploading firmware (%d bytes, offset=%d)\n", -+ blk_len, offset); -+ memcpy(usbbuf, ((u8 *)fw_image) + offset, blk_len); -+ -+ p = usbbuf; -+ for (i = 0; i < blk_len; i += 4) { -+ *(u32 *)p = be32_to_cpu(*(u32 *)p); -+ p += 4; -+ } -+ -+ result = usb_bulk_msg(usbdev, outpipe, usbbuf, blk_len, &num_processed, HZ); -+ if ((result < 0) || (num_processed != blk_len)) -+ goto fw_end; -+ offset += blk_len; -+ } -+ if (need_padding) { -+ printk(KERN_DEBUG "send padding\n"); -+ memset(usbbuf, 0, 4); -+ result = usb_bulk_msg(usbdev, outpipe, usbbuf, 4, &num_processed, HZ); -+ if ((result < 0) || (num_processed != 4)) -+ goto fw_end; -+ } -+ printk(KERN_DEBUG "read firmware upload result\n"); -+ memset(cmdbuf, 0, 20); /* additional memset */ -+ result = usb_bulk_msg(usbdev, inpipe, cmdbuf, 20, &num_processed, 2000); -+ if (result < 0) -+ goto fw_end; -+ if (*(u32 *)&cmdbuf[4] == 0x40000003) -+ goto fw_end; -+ if (*(u32 *)&cmdbuf[4]) -+ goto fw_end; -+ if (*(u16 *)&cmdbuf[16] != 1) -+ goto fw_end; -+ -+ val = *(u32 *)&cmdbuf[0]; -+ if ((val & 0x3fff) -+ || ((val & 0xc000) != 0xc000)) -+ goto fw_end; -+ -+ val = *(u32 *)&cmdbuf[8]; -+ if (val & 2) { -+ result = usb_bulk_msg(usbdev, inpipe, cmdbuf, 20, &num_processed, 2000); -+ if (result < 0) -+ goto fw_end; -+ val = *(u32 *)&cmdbuf[8]; -+ } -+ /* yup, no "else" here! */ -+ if (val & 1) { -+ memset(usbbuf, 0, 4); -+ result = usb_bulk_msg(usbdev, outpipe, usbbuf, 4, &num_processed, HZ); -+ if ((result < 0) || (!num_processed)) -+ goto fw_end; -+ } -+ -+ printk("TNETW1450 firmware upload successful!\n"); -+ result = 0; -+ goto end; -+fw_end: -+ result = -EIO; -+ goto end; -+ } else { -+ /* ACX100 USB */ -+ -+ /* now upload the firmware, slice the data into blocks */ -+ offset = 8; -+ while (offset < file_size) { -+ blk_len = file_size - offset; -+ if (blk_len > USB_RWMEM_MAXLEN) { -+ blk_len = USB_RWMEM_MAXLEN; -+ } -+ log(L_INIT, "uploading firmware (%d bytes, offset=%d)\n", -+ blk_len, offset); -+ memcpy(usbbuf, ((u8 *)fw_image) + offset, blk_len); -+ result = usb_control_msg(usbdev, outpipe, -+ ACX_USB_REQ_UPLOAD_FW, -+ USB_TYPE_VENDOR|USB_DIR_OUT, -+ (file_size - 8) & 0xffff, /* value */ -+ (file_size - 8) >> 16, /* index */ -+ usbbuf, /* dataptr */ -+ blk_len, /* size */ -+ 3000 /* timeout in ms */ -+ ); -+ offset += blk_len; -+ if (result < 0) { -+ printk(KERN_ERR "acx: error %d during upload " -+ "of firmware, aborting\n", result); -+ goto end; -+ } -+ } -+ -+ /* finally, send the checksum and reboot the device */ -+ /* does this trigger the reboot? */ -+ result = usb_control_msg(usbdev, outpipe, -+ ACX_USB_REQ_UPLOAD_FW, -+ USB_TYPE_VENDOR|USB_DIR_OUT, -+ img_checksum & 0xffff, /* value */ -+ img_checksum >> 16, /* index */ -+ NULL, /* dataptr */ -+ 0, /* size */ -+ 3000 /* timeout in ms */ -+ ); -+ if (result < 0) { -+ printk(KERN_ERR "acx: error %d during tx of checksum, " -+ "aborting\n", result); -+ goto end; -+ } -+ result = usb_control_msg(usbdev, inpipe, -+ ACX_USB_REQ_ACK_CS, -+ USB_TYPE_VENDOR|USB_DIR_IN, -+ img_checksum & 0xffff, /* value */ -+ img_checksum >> 16, /* index */ -+ usbbuf, /* dataptr */ -+ 8, /* size */ -+ 3000 /* timeout in ms */ -+ ); -+ if (result < 0) { -+ printk(KERN_ERR "acx: error %d during ACK of checksum, " -+ "aborting\n", result); -+ goto end; -+ } -+ if (*usbbuf != 0x10) { -+ printk(KERN_ERR "acx: invalid checksum?\n"); -+ result = -EINVAL; -+ goto end; -+ } -+ result = 0; -+ } -+ -+end: -+ vfree(fw_image); -+ kfree(usbbuf); -+ -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/* FIXME: maybe merge it with usual eeprom reading, into common code? */ -+static void -+acxusb_s_read_eeprom_version(acx_device_t *adev) -+{ -+ u8 eeprom_ver[0x8]; -+ -+ memset(eeprom_ver, 0, sizeof(eeprom_ver)); -+ acx_s_interrogate(adev, &eeprom_ver, ACX1FF_IE_EEPROM_VER); -+ -+ /* FIXME: which one of those values to take? */ -+ adev->eeprom_version = eeprom_ver[5]; -+} -+ -+ -+/* -+ * temporary helper function to at least fill important cfgopt members with -+ * useful replacement values until we figure out how one manages to fetch -+ * the configoption struct in the USB device case... -+ */ -+static int -+acxusb_s_fill_configoption(acx_device_t *adev) -+{ -+ adev->cfgopt_probe_delay = 200; -+ adev->cfgopt_dot11CCAModes = 4; -+ adev->cfgopt_dot11Diversity = 1; -+ adev->cfgopt_dot11ShortPreambleOption = 1; -+ adev->cfgopt_dot11PBCCOption = 1; -+ adev->cfgopt_dot11ChannelAgility = 0; -+ adev->cfgopt_dot11PhyType = 5; -+ adev->cfgopt_dot11TempType = 1; -+ return OK; -+} -+ -+ -+/*********************************************************************** -+** acxusb_e_probe() -+** -+** This function is invoked by the kernel's USB core whenever a new device is -+** attached to the system or the module is loaded. It is presented a usb_device -+** structure from which information regarding the device is obtained and evaluated. -+** In case this driver is able to handle one of the offered devices, it returns -+** a non-null pointer to a driver context and thereby claims the device. -+*/ -+ -+static void -+dummy_netdev_init(struct net_device *ndev) {} -+ -+static int -+acxusb_e_probe(struct usb_interface *intf, const struct usb_device_id *devID) -+{ -+ struct usb_device *usbdev = interface_to_usbdev(intf); -+ acx_device_t *adev = NULL; -+ struct net_device *ndev = NULL; -+ struct usb_config_descriptor *config; -+ struct usb_endpoint_descriptor *epdesc; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+ struct usb_host_endpoint *ep; -+#endif -+ struct usb_interface_descriptor *ifdesc; -+ const char* msg; -+ int numconfigs, numfaces, numep; -+ int result = OK; -+ int i; -+ int radio_type; -+ /* this one needs to be more precise in case there appears a TNETW1450 from the same vendor */ -+ int is_tnetw1450 = (usbdev->descriptor.idVendor != ACX100_VENDOR_ID); -+ -+ FN_ENTER; -+ -+ if (is_tnetw1450) { -+ /* Boot the device (i.e. upload the firmware) */ -+ acxusb_boot(usbdev, is_tnetw1450, &radio_type); -+ -+ /* TNETW1450-based cards will continue right away with -+ * the same USB ID after booting */ -+ } else { -+ /* First check if this is the "unbooted" hardware */ -+ if (usbdev->descriptor.idProduct == ACX100_PRODUCT_ID_UNBOOTED) { -+ -+ /* Boot the device (i.e. upload the firmware) */ -+ acxusb_boot(usbdev, is_tnetw1450, &radio_type); -+ -+ /* DWL-120+ will first boot the firmware, -+ * then later have a *separate* probe() run -+ * since its USB ID will have changed after -+ * firmware boot! -+ * Since the first probe() run has no -+ * other purpose than booting the firmware, -+ * simply return immediately. -+ */ -+ log(L_INIT, "finished booting, returning from probe()\n"); -+ result = OK; /* success */ -+ goto end; -+ } -+ else -+ /* device not unbooted, but invalid USB ID!? */ -+ if (usbdev->descriptor.idProduct != ACX100_PRODUCT_ID_BOOTED) -+ goto end_nodev; -+ } -+ -+/* Ok, so it's our device and it has already booted */ -+ -+ /* Allocate memory for a network device */ -+ -+ ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init); -+ /* (NB: memsets to 0 entire area) */ -+ if (!ndev) { -+ msg = "acx: no memory for netdev\n"; -+ goto end_nomem; -+ } -+ -+ /* Register the callbacks for the network device functions */ -+ -+ ether_setup(ndev); -+ ndev->open = &acxusb_e_open; -+ ndev->stop = &acxusb_e_close; -+ ndev->hard_start_xmit = (void *)&acx_i_start_xmit; -+ ndev->get_stats = (void *)&acx_e_get_stats; -+#if IW_HANDLER_VERSION <= 5 -+ ndev->get_wireless_stats = (void *)&acx_e_get_wireless_stats; -+#endif -+ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -+ ndev->set_multicast_list = (void *)&acxusb_i_set_rx_mode; -+#ifdef HAVE_TX_TIMEOUT -+ ndev->tx_timeout = &acxusb_i_tx_timeout; -+ ndev->watchdog_timeo = 4 * HZ; -+#endif -+ ndev->change_mtu = &acx_e_change_mtu; -+ SET_MODULE_OWNER(ndev); -+ -+ /* Setup private driver context */ -+ -+ adev = ndev2adev(ndev); -+ adev->ndev = ndev; -+ -+ adev->dev_type = DEVTYPE_USB; -+ adev->radio_type = radio_type; -+ if (is_tnetw1450) { -+ /* well, actually it's a TNETW1450, but since it -+ * seems to be sufficiently similar to TNETW1130, -+ * I don't want to change large amounts of code now */ -+ adev->chip_type = CHIPTYPE_ACX111; -+ } else { -+ adev->chip_type = CHIPTYPE_ACX100; -+ } -+ -+ adev->usbdev = usbdev; -+ spin_lock_init(&adev->lock); /* initial state: unlocked */ -+ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ -+ -+ /* Check that this is really the hardware we know about. -+ ** If not sure, at least notify the user that he -+ ** may be in trouble... -+ */ -+ numconfigs = (int)usbdev->descriptor.bNumConfigurations; -+ if (numconfigs != 1) -+ printk("acx: number of configurations is %d, " -+ "this driver only knows how to handle 1, " -+ "be prepared for surprises\n", numconfigs); -+ -+ config = &usbdev->config->desc; -+ numfaces = config->bNumInterfaces; -+ if (numfaces != 1) -+ printk("acx: number of interfaces is %d, " -+ "this driver only knows how to handle 1, " -+ "be prepared for surprises\n", numfaces); -+ -+ ifdesc = &intf->altsetting->desc; -+ numep = ifdesc->bNumEndpoints; -+ log(L_DEBUG, "# of endpoints: %d\n", numep); -+ -+ if (is_tnetw1450) { -+ adev->bulkoutep = 1; -+ adev->bulkinep = 2; -+ } else { -+ /* obtain information about the endpoint -+ ** addresses, begin with some default values -+ */ -+ adev->bulkoutep = 1; -+ adev->bulkinep = 1; -+ for (i = 0; i < numep; i++) { -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+ ep = usbdev->ep_in[i]; -+ if (!ep) -+ continue; -+ epdesc = &ep->desc; -+#else -+ epdesc = usb_epnum_to_ep_desc(usbdev, i); -+ if (!epdesc) -+ continue; -+#endif -+ if (epdesc->bmAttributes & USB_ENDPOINT_XFER_BULK) { -+ if (epdesc->bEndpointAddress & 0x80) -+ adev->bulkinep = epdesc->bEndpointAddress & 0xF; -+ else -+ adev->bulkoutep = epdesc->bEndpointAddress & 0xF; -+ } -+ } -+ } -+ log(L_DEBUG, "bulkout ep: 0x%X\n", adev->bulkoutep); -+ log(L_DEBUG, "bulkin ep: 0x%X\n", adev->bulkinep); -+ -+ /* already done by memset: adev->rxtruncsize = 0; */ -+ log(L_DEBUG, "TXBUFSIZE=%d RXBUFSIZE=%d\n", -+ (int) TXBUFSIZE, (int) RXBUFSIZE); -+ -+ /* Allocate the RX/TX containers. */ -+ adev->usb_tx = kmalloc(sizeof(usb_tx_t) * ACX_TX_URB_CNT, GFP_KERNEL); -+ if (!adev->usb_tx) { -+ msg = "acx: no memory for tx container"; -+ goto end_nomem; -+ } -+ adev->usb_rx = kmalloc(sizeof(usb_rx_t) * ACX_RX_URB_CNT, GFP_KERNEL); -+ if (!adev->usb_rx) { -+ msg = "acx: no memory for rx container"; -+ goto end_nomem; -+ } -+ -+ /* Setup URBs for bulk-in/out messages */ -+ for (i = 0; i < ACX_RX_URB_CNT; i++) { -+ adev->usb_rx[i].urb = usb_alloc_urb(0, GFP_KERNEL); -+ if (!adev->usb_rx[i].urb) { -+ msg = "acx: no memory for input URB\n"; -+ goto end_nomem; -+ } -+ adev->usb_rx[i].urb->status = 0; -+ adev->usb_rx[i].adev = adev; -+ adev->usb_rx[i].busy = 0; -+ } -+ -+ for (i = 0; i< ACX_TX_URB_CNT; i++) { -+ adev->usb_tx[i].urb = usb_alloc_urb(0, GFP_KERNEL); -+ if (!adev->usb_tx[i].urb) { -+ msg = "acx: no memory for output URB\n"; -+ goto end_nomem; -+ } -+ adev->usb_tx[i].urb->status = 0; -+ adev->usb_tx[i].adev = adev; -+ adev->usb_tx[i].busy = 0; -+ } -+ adev->tx_free = ACX_TX_URB_CNT; -+ -+ usb_set_intfdata(intf, adev); -+ SET_NETDEV_DEV(ndev, &intf->dev); -+ -+ /* TODO: move all of fw cmds to open()? But then we won't know our MAC addr -+ until ifup (it's available via reading ACX1xx_IE_DOT11_STATION_ID)... */ -+ -+ /* put acx out of sleep mode and initialize it */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); -+ -+ result = acx_s_init_mac(adev); -+ if (result) -+ goto end; -+ -+ /* TODO: see similar code in pci.c */ -+ acxusb_s_read_eeprom_version(adev); -+ acxusb_s_fill_configoption(adev); -+ acx_s_set_defaults(adev); -+ acx_s_get_firmware_version(adev); -+ acx_display_hardware_details(adev); -+ -+ /* Register the network device */ -+ log(L_INIT, "registering network device\n"); -+ result = register_netdev(ndev); -+ if (result) { -+ msg = "acx: failed to register USB network device " -+ "(error %d)\n"; -+ goto end_nomem; -+ } -+ -+ acx_proc_register_entries(ndev); -+ -+ acx_stop_queue(ndev, "on probe"); -+ acx_carrier_off(ndev, "on probe"); -+ -+ printk("acx: USB module " ACX_RELEASE " loaded successfully\n"); -+ -+#if CMD_DISCOVERY -+ great_inquisitor(adev); -+#endif -+ -+ /* Everything went OK, we are happy now */ -+ result = OK; -+ goto end; -+ -+end_nomem: -+ printk(msg, result); -+ -+ if (ndev) { -+ if (adev->usb_rx) { -+ for (i = 0; i < ACX_RX_URB_CNT; i++) -+ usb_free_urb(adev->usb_rx[i].urb); -+ kfree(adev->usb_rx); -+ } -+ if (adev->usb_tx) { -+ for (i = 0; i < ACX_TX_URB_CNT; i++) -+ usb_free_urb(adev->usb_tx[i].urb); -+ kfree(adev->usb_tx); -+ } -+ free_netdev(ndev); -+ } -+ -+ result = -ENOMEM; -+ goto end; -+ -+end_nodev: -+ /* no device we could handle, return error. */ -+ result = -EIO; -+ -+end: -+ FN_EXIT1(result); -+ return result; -+} -+ -+ -+/*********************************************************************** -+** acxusb_e_disconnect() -+** -+** This function is invoked whenever the user pulls the plug from the USB -+** device or the module is removed from the kernel. In these cases, the -+** network devices have to be taken down and all allocated memory has -+** to be freed. -+*/ -+static void -+acxusb_e_disconnect(struct usb_interface *intf) -+{ -+ acx_device_t *adev = usb_get_intfdata(intf); -+ unsigned long flags; -+ int i; -+ -+ FN_ENTER; -+ -+ /* No WLAN device... no sense */ -+ if (!adev) -+ goto end; -+ -+ /* Unregister network device -+ * -+ * If the interface is up, unregister_netdev() will take -+ * care of calling our close() function, which takes -+ * care of unlinking the urbs, sending the device to -+ * sleep, etc... -+ * This can't be called with sem or lock held because -+ * _close() will try to grab it as well if it's called, -+ * deadlocking the machine. -+ */ -+ unregister_netdev(adev->ndev); -+ -+ acx_sem_lock(adev); -+ acx_lock(adev, flags); -+ /* This device exists no more */ -+ usb_set_intfdata(intf, NULL); -+ acx_proc_unregister_entries(adev->ndev); -+ -+ /* -+ * Here we only free them. _close() took care of -+ * unlinking them. -+ */ -+ for (i = 0; i < ACX_RX_URB_CNT; ++i) { -+ usb_free_urb(adev->usb_rx[i].urb); -+ } -+ for (i = 0; i< ACX_TX_URB_CNT; ++i) { -+ usb_free_urb(adev->usb_tx[i].urb); -+ } -+ -+ /* Freeing containers */ -+ kfree(adev->usb_rx); -+ kfree(adev->usb_tx); -+ -+ acx_unlock(adev, flags); -+ acx_sem_unlock(adev); -+ -+ free_netdev(adev->ndev); -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxusb_e_open() -+** This function is called when the user sets up the network interface. -+** It initializes a management timer, sets up the USB card and starts -+** the network tx queue and USB receive. -+*/ -+static int -+acxusb_e_open(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ int i; -+ -+ FN_ENTER; -+ -+ acx_sem_lock(adev); -+ -+ /* put the ACX100 out of sleep mode */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); -+ -+ acx_init_task_scheduler(adev); -+ -+ init_timer(&adev->mgmt_timer); -+ adev->mgmt_timer.function = acx_i_timer; -+ adev->mgmt_timer.data = (unsigned long)adev; -+ -+ /* acx_s_start needs it */ -+ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ acx_s_start(adev); -+ -+ /* don't acx_start_queue() here, we need to associate first */ -+ -+ acx_lock(adev, flags); -+ for (i = 0; i < ACX_RX_URB_CNT; i++) { -+ adev->usb_rx[i].urb->status = 0; -+ } -+ -+ acxusb_l_poll_rx(adev, &adev->usb_rx[0]); -+ -+ acx_unlock(adev, flags); -+ -+ acx_sem_unlock(adev); -+ -+ FN_EXIT0; -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** acxusb_e_close() -+** -+** This function stops the network functionality of the interface (invoked -+** when the user calls ifconfig down). The tx queue is halted and -+** the device is marked as down. In case there were any pending USB bulk -+** transfers, these are unlinked (asynchronously). The module in-use count -+** is also decreased in this function. -+*/ -+static int -+acxusb_e_close(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ int i; -+ -+ FN_ENTER; -+ -+#ifdef WE_STILL_DONT_CARE_ABOUT_IT -+ /* Transmit a disassociate frame */ -+ lock -+ acx_l_transmit_disassoc(adev, &client); -+ unlock -+#endif -+ -+ acx_sem_lock(adev); -+ -+ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); -+ -+/* Code below is remarkably similar to acxpci_s_down(). Maybe we can merge them? */ -+ -+ /* Make sure we don't get any more rx requests */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); -+ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); -+ -+ /* -+ * We must do FLUSH *without* holding sem to avoid a deadlock. -+ * See pci.c:acxpci_s_down() for deails. -+ */ -+ acx_sem_unlock(adev); -+ FLUSH_SCHEDULED_WORK(); -+ acx_sem_lock(adev); -+ -+ /* Power down the device */ -+ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); -+ -+ /* Stop the transmit queue, mark the device as DOWN */ -+ acx_lock(adev, flags); -+ acx_stop_queue(ndev, "on ifdown"); -+ acx_set_status(adev, ACX_STATUS_0_STOPPED); -+ /* stop pending rx/tx urb transfers */ -+ for (i = 0; i < ACX_TX_URB_CNT; i++) { -+ acxusb_unlink_urb(adev->usb_tx[i].urb); -+ adev->usb_tx[i].busy = 0; -+ } -+ for (i = 0; i < ACX_RX_URB_CNT; i++) { -+ acxusb_unlink_urb(adev->usb_rx[i].urb); -+ adev->usb_rx[i].busy = 0; -+ } -+ adev->tx_free = ACX_TX_URB_CNT; -+ acx_unlock(adev, flags); -+ -+ /* Must do this outside of lock */ -+ del_timer_sync(&adev->mgmt_timer); -+ -+ acx_sem_unlock(adev); -+ -+ FN_EXIT0; -+ return 0; -+} -+ -+ -+/*********************************************************************** -+** acxusb_l_poll_rx -+** This function (re)initiates a bulk-in USB transfer on a given urb -+*/ -+static void -+acxusb_l_poll_rx(acx_device_t *adev, usb_rx_t* rx) -+{ -+ struct usb_device *usbdev; -+ struct urb *rxurb; -+ int errcode, rxnum; -+ unsigned int inpipe; -+ -+ FN_ENTER; -+ -+ rxurb = rx->urb; -+ usbdev = adev->usbdev; -+ -+ rxnum = rx - adev->usb_rx; -+ -+ inpipe = usb_rcvbulkpipe(usbdev, adev->bulkinep); -+ if (unlikely(rxurb->status == -EINPROGRESS)) { -+ printk(KERN_ERR "acx: error, rx triggered while rx urb in progress\n"); -+ /* FIXME: this is nasty, receive is being cancelled by this code -+ * on the other hand, this should not happen anyway... -+ */ -+ usb_unlink_urb(rxurb); -+ } else -+ if (unlikely(rxurb->status == -ECONNRESET)) { -+ log(L_USBRXTX, "acx_usb: _poll_rx: connection reset\n"); -+ goto end; -+ } -+ rxurb->actual_length = 0; -+ usb_fill_bulk_urb(rxurb, usbdev, inpipe, -+ &rx->bulkin, /* dataptr */ -+ RXBUFSIZE, /* size */ -+ acxusb_i_complete_rx, /* handler */ -+ rx /* handler param */ -+ ); -+ rxurb->transfer_flags = URB_ASYNC_UNLINK; -+ -+ /* ATOMIC: we may be called from complete_rx() usb callback */ -+ errcode = usb_submit_urb(rxurb, GFP_ATOMIC); -+ /* FIXME: evaluate the error code! */ -+ log(L_USBRXTX, "SUBMIT RX (%d) inpipe=0x%X size=%d errcode=%d\n", -+ rxnum, inpipe, (int) RXBUFSIZE, errcode); -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxusb_i_complete_rx() -+** Inputs: -+** urb -> pointer to USB request block -+** regs -> pointer to register-buffer for syscalls (see asm/ptrace.h) -+** -+** This function is invoked by USB subsystem whenever a bulk receive -+** request returns. -+** The received data is then committed to the network stack and the next -+** USB receive is triggered. -+*/ -+static void -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+acxusb_i_complete_rx(struct urb *urb) -+#else -+acxusb_i_complete_rx(struct urb *urb, struct pt_regs *regs) -+#endif -+{ -+ acx_device_t *adev; -+ rxbuffer_t *ptr; -+ rxbuffer_t *inbuf; -+ usb_rx_t *rx; -+ unsigned long flags; -+ int size, remsize, packetsize, rxnum; -+ -+ FN_ENTER; -+ -+ BUG_ON(!urb->context); -+ -+ rx = (usb_rx_t *)urb->context; -+ adev = rx->adev; -+ -+ acx_lock(adev, flags); -+ -+ /* -+ * Happens on disconnect or close. Don't play with the urb. -+ * Don't resubmit it. It will get unlinked by close() -+ */ -+ if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) { -+ log(L_USBRXTX, "rx: device is down, not doing anything\n"); -+ goto end_unlock; -+ } -+ -+ inbuf = &rx->bulkin; -+ size = urb->actual_length; -+ remsize = size; -+ rxnum = rx - adev->usb_rx; -+ -+ log(L_USBRXTX, "RETURN RX (%d) status=%d size=%d\n", -+ rxnum, urb->status, size); -+ -+ /* Send the URB that's waiting. */ -+ log(L_USBRXTX, "rxnum=%d, sending=%d\n", rxnum, rxnum^1); -+ acxusb_l_poll_rx(adev, &adev->usb_rx[rxnum^1]); -+ -+ if (unlikely(size > sizeof(rxbuffer_t))) -+ printk("acx_usb: rx too large: %d, please report\n", size); -+ -+ /* check if the transfer was aborted */ -+ switch (urb->status) { -+ case 0: /* No error */ -+ break; -+ case -EOVERFLOW: -+ printk(KERN_ERR "acx: rx data overrun\n"); -+ adev->rxtruncsize = 0; /* Not valid anymore. */ -+ goto end_unlock; -+ case -ECONNRESET: -+ adev->rxtruncsize = 0; -+ goto end_unlock; -+ case -ESHUTDOWN: /* rmmod */ -+ adev->rxtruncsize = 0; -+ goto end_unlock; -+ default: -+ adev->rxtruncsize = 0; -+ adev->stats.rx_errors++; -+ printk("acx: rx error (urb status=%d)\n", urb->status); -+ goto end_unlock; -+ } -+ -+ if (unlikely(!size)) -+ printk("acx: warning, encountered zerolength rx packet\n"); -+ -+ if (urb->transfer_buffer != inbuf) -+ goto end_unlock; -+ -+ /* check if previous frame was truncated -+ ** FIXME: this code can only handle truncation -+ ** of consecutive packets! -+ */ -+ ptr = inbuf; -+ if (adev->rxtruncsize) { -+ int tail_size; -+ -+ ptr = &adev->rxtruncbuf; -+ packetsize = RXBUF_BYTES_USED(ptr); -+ if (acx_debug & L_USBRXTX) { -+ printk("handling truncated frame (truncsize=%d size=%d " -+ "packetsize(from trunc)=%d)\n", -+ adev->rxtruncsize, size, packetsize); -+ acx_dump_bytes(ptr, RXBUF_HDRSIZE); -+ acx_dump_bytes(inbuf, RXBUF_HDRSIZE); -+ } -+ -+ /* bytes needed for rxtruncbuf completion: */ -+ tail_size = packetsize - adev->rxtruncsize; -+ -+ if (size < tail_size) { -+ /* there is not enough data to complete this packet, -+ ** simply append the stuff to the truncation buffer -+ */ -+ memcpy(((char *)ptr) + adev->rxtruncsize, inbuf, size); -+ adev->rxtruncsize += size; -+ remsize = 0; -+ } else { -+ /* ok, this data completes the previously -+ ** truncated packet. copy it into a descriptor -+ ** and give it to the rest of the stack */ -+ -+ /* append tail to previously truncated part -+ ** NB: adev->rxtruncbuf (pointed to by ptr) can't -+ ** overflow because this is already checked before -+ ** truncation buffer was filled. See below, -+ ** "if (packetsize > sizeof(rxbuffer_t))..." code */ -+ memcpy(((char *)ptr) + adev->rxtruncsize, inbuf, tail_size); -+ -+ if (acx_debug & L_USBRXTX) { -+ printk("full trailing packet + 12 bytes:\n"); -+ acx_dump_bytes(inbuf, tail_size + RXBUF_HDRSIZE); -+ } -+ acx_l_process_rxbuf(adev, ptr); -+ adev->rxtruncsize = 0; -+ ptr = (rxbuffer_t *) (((char *)inbuf) + tail_size); -+ remsize -= tail_size; -+ } -+ log(L_USBRXTX, "post-merge size=%d remsize=%d\n", -+ size, remsize); -+ } -+ -+ /* size = USB data block size -+ ** remsize = unprocessed USB bytes left -+ ** ptr = current pos in USB data block -+ */ -+ while (remsize) { -+ if (remsize < RXBUF_HDRSIZE) { -+ printk("acx: truncated rx header (%d bytes)!\n", -+ remsize); -+ if (ACX_DEBUG) -+ acx_dump_bytes(ptr, remsize); -+ break; -+ } -+ -+ packetsize = RXBUF_BYTES_USED(ptr); -+ log(L_USBRXTX, "packet with packetsize=%d\n", packetsize); -+ -+ if (RXBUF_IS_TXSTAT(ptr)) { -+ /* do rate handling */ -+ usb_txstatus_t *stat = (void*)ptr; -+ u16 client_no = (u16)stat->hostdata; -+ -+ log(L_USBRXTX, "tx: stat: mac_cnt_rcvd:%04X " -+ "queue_index:%02X mac_status:%02X hostdata:%08X " -+ "rate:%u ack_failures:%02X rts_failures:%02X " -+ "rts_ok:%02X\n", -+ stat->mac_cnt_rcvd, -+ stat->queue_index, stat->mac_status, stat->hostdata, -+ stat->rate, stat->ack_failures, stat->rts_failures, -+ stat->rts_ok); -+ -+ if (adev->rate_auto && client_no < VEC_SIZE(adev->sta_list)) { -+ client_t *clt = &adev->sta_list[client_no]; -+ u16 cur = stat->hostdata >> 16; -+ -+ if (clt && clt->rate_cur == cur) { -+ acx_l_handle_txrate_auto(adev, clt, -+ cur, /* intended rate */ -+ stat->rate, 0, /* actually used rate */ -+ stat->mac_status, /* error? */ -+ ACX_TX_URB_CNT - adev->tx_free); -+ } -+ } -+ goto next; -+ } -+ -+ if (packetsize > sizeof(rxbuffer_t)) { -+ printk("acx: packet exceeds max wlan " -+ "frame size (%d > %d). size=%d\n", -+ packetsize, (int) sizeof(rxbuffer_t), size); -+ if (ACX_DEBUG) -+ acx_dump_bytes(ptr, 16); -+ /* FIXME: put some real error-handling in here! */ -+ break; -+ } -+ -+ if (packetsize > remsize) { -+ /* frame truncation handling */ -+ if (acx_debug & L_USBRXTX) { -+ printk("need to truncate packet, " -+ "packetsize=%d remsize=%d " -+ "size=%d bytes:", -+ packetsize, remsize, size); -+ acx_dump_bytes(ptr, RXBUF_HDRSIZE); -+ } -+ memcpy(&adev->rxtruncbuf, ptr, remsize); -+ adev->rxtruncsize = remsize; -+ break; -+ } -+ -+ /* packetsize <= remsize */ -+ /* now handle the received data */ -+ acx_l_process_rxbuf(adev, ptr); -+next: -+ ptr = (rxbuffer_t *)(((char *)ptr) + packetsize); -+ remsize -= packetsize; -+ if ((acx_debug & L_USBRXTX) && remsize) { -+ printk("more than one packet in buffer, " -+ "second packet hdr:"); -+ acx_dump_bytes(ptr, RXBUF_HDRSIZE); -+ } -+ } -+ -+end_unlock: -+ acx_unlock(adev, flags); -+/* end: */ -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+** acxusb_i_complete_tx() -+** Inputs: -+** urb -> pointer to USB request block -+** regs -> pointer to register-buffer for syscalls (see asm/ptrace.h) -+** -+** This function is invoked upon termination of a USB transfer. -+*/ -+static void -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) -+acxusb_i_complete_tx(struct urb *urb) -+#else -+acxusb_i_complete_tx(struct urb *urb, struct pt_regs *regs) -+#endif -+{ -+ acx_device_t *adev; -+ usb_tx_t *tx; -+ unsigned long flags; -+ int txnum; -+ -+ FN_ENTER; -+ -+ BUG_ON(!urb->context); -+ -+ tx = (usb_tx_t *)urb->context; -+ adev = tx->adev; -+ -+ txnum = tx - adev->usb_tx; -+ -+ acx_lock(adev, flags); -+ -+ /* -+ * If the iface isn't up, we don't have any right -+ * to play with them. The urb may get unlinked. -+ */ -+ if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) { -+ log(L_USBRXTX, "tx: device is down, not doing anything\n"); -+ goto end_unlock; -+ } -+ -+ log(L_USBRXTX, "RETURN TX (%d): status=%d size=%d\n", -+ txnum, urb->status, urb->actual_length); -+ -+ /* handle USB transfer errors */ -+ switch (urb->status) { -+ case 0: /* No error */ -+ break; -+ case -ESHUTDOWN: -+ goto end_unlock; -+ break; -+ case -ECONNRESET: -+ goto end_unlock; -+ break; -+ /* FIXME: real error-handling code here please */ -+ default: -+ printk(KERN_ERR "acx: tx error, urb status=%d\n", urb->status); -+ /* FIXME: real error-handling code here please */ -+ } -+ -+ /* free the URB and check for more data */ -+ tx->busy = 0; -+ adev->tx_free++; -+ if ((adev->tx_free >= TX_START_QUEUE) -+ && (adev->status == ACX_STATUS_4_ASSOCIATED) -+ && (acx_queue_stopped(adev->ndev)) -+ ) { -+ log(L_BUF, "tx: wake queue (%u free txbufs)\n", -+ adev->tx_free); -+ acx_wake_queue(adev->ndev, NULL); -+ } -+ -+end_unlock: -+ acx_unlock(adev, flags); -+/* end: */ -+ FN_EXIT0; -+} -+ -+ -+/*************************************************************** -+** acxusb_l_alloc_tx -+** Actually returns a usb_tx_t* ptr -+*/ -+tx_t* -+acxusb_l_alloc_tx(acx_device_t *adev) -+{ -+ usb_tx_t *tx; -+ unsigned head; -+ -+ FN_ENTER; -+ -+ head = adev->tx_head; -+ do { -+ head = (head + 1) % ACX_TX_URB_CNT; -+ if (!adev->usb_tx[head].busy) { -+ log(L_USBRXTX, "allocated tx %d\n", head); -+ tx = &adev->usb_tx[head]; -+ tx->busy = 1; -+ adev->tx_free--; -+ /* Keep a few free descs between head and tail of tx ring. -+ ** It is not absolutely needed, just feels safer */ -+ if (adev->tx_free < TX_STOP_QUEUE) { -+ log(L_BUF, "tx: stop queue " -+ "(%u free txbufs)\n", adev->tx_free); -+ acx_stop_queue(adev->ndev, NULL); -+ } -+ goto end; -+ } -+ } while (likely(head!=adev->tx_head)); -+ tx = NULL; -+ printk_ratelimited("acx: tx buffers full\n"); -+end: -+ adev->tx_head = head; -+ FN_EXIT0; -+ return (tx_t*)tx; -+} -+ -+ -+/*************************************************************** -+** Used if alloc_tx()'ed buffer needs to be cancelled without doing tx -+*/ -+void -+acxusb_l_dealloc_tx(tx_t *tx_opaque) -+{ -+ usb_tx_t* tx = (usb_tx_t*)tx_opaque; -+ tx->busy = 0; -+} -+ -+ -+/*************************************************************** -+*/ -+void* -+acxusb_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) -+{ -+ usb_tx_t* tx = (usb_tx_t*)tx_opaque; -+ return &tx->bulkout.data; -+} -+ -+ -+/*************************************************************** -+** acxusb_l_tx_data -+** -+** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). -+** Can be called from acx_i_start_xmit (data frames from net core). -+*/ -+void -+acxusb_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int wlanpkt_len) -+{ -+ struct usb_device *usbdev; -+ struct urb* txurb; -+ usb_tx_t* tx; -+ usb_txbuffer_t* txbuf; -+ client_t *clt; -+ wlan_hdr_t* whdr; -+ unsigned int outpipe; -+ int ucode, txnum; -+ -+ FN_ENTER; -+ -+ tx = ((usb_tx_t *)tx_opaque); -+ txurb = tx->urb; -+ txbuf = &tx->bulkout; -+ whdr = (wlan_hdr_t *)txbuf->data; -+ txnum = tx - adev->usb_tx; -+ -+ log(L_DEBUG, "using buf#%d free=%d len=%d\n", -+ txnum, adev->tx_free, wlanpkt_len); -+ -+ switch (adev->mode) { -+ case ACX_MODE_0_ADHOC: -+ case ACX_MODE_3_AP: -+ clt = acx_l_sta_list_get(adev, whdr->a1); -+ break; -+ case ACX_MODE_2_STA: -+ clt = adev->ap_client; -+ break; -+ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ -+ clt = NULL; -+ break; -+ } -+ -+ if (unlikely(clt && !clt->rate_cur)) { -+ printk("acx: driver bug! bad ratemask\n"); -+ goto end; -+ } -+ -+ /* fill the USB transfer header */ -+ txbuf->desc = cpu_to_le16(USB_TXBUF_TXDESC); -+ txbuf->mpdu_len = cpu_to_le16(wlanpkt_len); -+ txbuf->queue_index = 1; -+ if (clt) { -+ txbuf->rate = clt->rate_100; -+ txbuf->hostdata = (clt - adev->sta_list) | (clt->rate_cur << 16); -+ } else { -+ txbuf->rate = adev->rate_bcast100; -+ txbuf->hostdata = ((u16)-1) | (adev->rate_bcast << 16); -+ } -+ txbuf->ctrl1 = DESC_CTL_FIRSTFRAG; -+ if (1 == adev->preamble_cur) -+ SET_BIT(txbuf->ctrl1, DESC_CTL_SHORT_PREAMBLE); -+ txbuf->ctrl2 = 0; -+ txbuf->data_len = cpu_to_le16(wlanpkt_len); -+ -+ if (unlikely(acx_debug & L_DATA)) { -+ printk("dump of bulk out urb:\n"); -+ acx_dump_bytes(txbuf, wlanpkt_len + USB_TXBUF_HDRSIZE); -+ } -+ -+ if (unlikely(txurb->status == -EINPROGRESS)) { -+ printk("acx: trying to submit tx urb while already in progress\n"); -+ } -+ -+ /* now schedule the USB transfer */ -+ usbdev = adev->usbdev; -+ outpipe = usb_sndbulkpipe(usbdev, adev->bulkoutep); -+ -+ usb_fill_bulk_urb(txurb, usbdev, outpipe, -+ txbuf, /* dataptr */ -+ wlanpkt_len + USB_TXBUF_HDRSIZE, /* size */ -+ acxusb_i_complete_tx, /* handler */ -+ tx /* handler param */ -+ ); -+ -+ txurb->transfer_flags = URB_ASYNC_UNLINK|URB_ZERO_PACKET; -+ ucode = usb_submit_urb(txurb, GFP_ATOMIC); -+ log(L_USBRXTX, "SUBMIT TX (%d): outpipe=0x%X buf=%p txsize=%d " -+ "rate=%u errcode=%d\n", txnum, outpipe, txbuf, -+ wlanpkt_len + USB_TXBUF_HDRSIZE, txbuf->rate, ucode); -+ -+ if (unlikely(ucode)) { -+ printk(KERN_ERR "acx: submit_urb() error=%d txsize=%d\n", -+ ucode, wlanpkt_len + USB_TXBUF_HDRSIZE); -+ -+ /* on error, just mark the frame as done and update -+ ** the statistics -+ */ -+ adev->stats.tx_errors++; -+ tx->busy = 0; -+ adev->tx_free++; -+ /* needed? if (adev->tx_free > TX_START_QUEUE) acx_wake_queue(...) */ -+ } -+end: -+ FN_EXIT0; -+} -+ -+ -+/*********************************************************************** -+*/ -+static void -+acxusb_i_set_rx_mode(struct net_device *ndev) -+{ -+} -+ -+ -+/*********************************************************************** -+*/ -+#ifdef HAVE_TX_TIMEOUT -+static void -+acxusb_i_tx_timeout(struct net_device *ndev) -+{ -+ acx_device_t *adev = ndev2adev(ndev); -+ unsigned long flags; -+ int i; -+ -+ FN_ENTER; -+ -+ acx_lock(adev, flags); -+ /* unlink the URBs */ -+ for (i = 0; i < ACX_TX_URB_CNT; i++) { -+ acxusb_unlink_urb(adev->usb_tx[i].urb); -+ adev->usb_tx[i].busy = 0; -+ } -+ adev->tx_free = ACX_TX_URB_CNT; -+ /* TODO: stats update */ -+ acx_unlock(adev, flags); -+ -+ FN_EXIT0; -+} -+#endif -+ -+ -+/*********************************************************************** -+** init_module() -+** -+** This function is invoked upon loading of the kernel module. -+** It registers itself at the kernel's USB subsystem. -+** -+** Returns: Errorcode on failure, 0 on success -+*/ -+int __init -+acxusb_e_init_module(void) -+{ -+ log(L_INIT, "USB module " ACX_RELEASE " initialized, " -+ "probing for devices...\n"); -+ return usb_register(&acxusb_driver); -+} -+ -+ -+ -+/*********************************************************************** -+** cleanup_module() -+** -+** This function is invoked as last step of the module unloading. It simply -+** deregisters this module at the kernel's USB subsystem. -+*/ -+void __exit -+acxusb_e_cleanup_module() -+{ -+ usb_deregister(&acxusb_driver); -+} -+ -+ -+/*********************************************************************** -+** DEBUG STUFF -+*/ -+#if ACX_DEBUG -+ -+#ifdef UNUSED -+static void -+dump_device(struct usb_device *usbdev) -+{ -+ int i; -+ struct usb_config_descriptor *cd; -+ -+ printk("acx device dump:\n"); -+ printk(" devnum: %d\n", usbdev->devnum); -+ printk(" speed: %d\n", usbdev->speed); -+ printk(" tt: 0x%X\n", (unsigned int)(usbdev->tt)); -+ printk(" ttport: %d\n", (unsigned int)(usbdev->ttport)); -+ printk(" toggle[0]: 0x%X toggle[1]: 0x%X\n", (unsigned int)(usbdev->toggle[0]), (unsigned int)(usbdev->toggle[1])); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) -+ /* This saw a change after 2.6.10 */ -+ printk(" ep_in wMaxPacketSize: "); -+ for (i = 0; i < 16; ++i) -+ if (usbdev->ep_in[i] != NULL) -+ printk("%d:%d ", i, usbdev->ep_in[i]->desc.wMaxPacketSize); -+ printk("\n"); -+ printk(" ep_out wMaxPacketSize: "); -+ for (i = 0; i < VEC_SIZE(usbdev->ep_out); ++i) -+ if (usbdev->ep_out[i] != NULL) -+ printk("%d:%d ", i, usbdev->ep_out[i]->desc.wMaxPacketSize); -+ printk("\n"); -+#else -+ printk(" epmaxpacketin: "); -+ for (i = 0; i < 16; i++) -+ printk("%d ", usbdev->epmaxpacketin[i]); -+ printk("\n"); -+ printk(" epmaxpacketout: "); -+ for (i = 0; i < 16; i++) -+ printk("%d ", usbdev->epmaxpacketout[i]); -+ printk("\n"); -+#endif -+ printk(" parent: 0x%X\n", (unsigned int)usbdev->parent); -+ printk(" bus: 0x%X\n", (unsigned int)usbdev->bus); -+#ifdef NO_DATATYPE -+ printk(" configs: "); -+ for (i = 0; i < usbdev->descriptor.bNumConfigurations; i++) -+ printk("0x%X ", usbdev->config[i]); -+ printk("\n"); -+#endif -+ printk(" actconfig: %p\n", usbdev->actconfig); -+ dump_device_descriptor(&usbdev->descriptor); -+ -+ cd = &usbdev->config->desc; -+ dump_config_descriptor(cd); -+} -+ -+ -+/*********************************************************************** -+*/ -+static void -+dump_config_descriptor(struct usb_config_descriptor *cd) -+{ -+ printk("Configuration Descriptor:\n"); -+ if (!cd) { -+ printk("NULL\n"); -+ return; -+ } -+ printk(" bLength: %d (0x%X)\n", cd->bLength, cd->bLength); -+ printk(" bDescriptorType: %d (0x%X)\n", cd->bDescriptorType, cd->bDescriptorType); -+ printk(" bNumInterfaces: %d (0x%X)\n", cd->bNumInterfaces, cd->bNumInterfaces); -+ printk(" bConfigurationValue: %d (0x%X)\n", cd->bConfigurationValue, cd->bConfigurationValue); -+ printk(" iConfiguration: %d (0x%X)\n", cd->iConfiguration, cd->iConfiguration); -+ printk(" bmAttributes: %d (0x%X)\n", cd->bmAttributes, cd->bmAttributes); -+ /* printk(" MaxPower: %d (0x%X)\n", cd->bMaxPower, cd->bMaxPower); */ -+} -+ -+ -+static void -+dump_device_descriptor(struct usb_device_descriptor *dd) -+{ -+ printk("Device Descriptor:\n"); -+ if (!dd) { -+ printk("NULL\n"); -+ return; -+ } -+ printk(" bLength: %d (0x%X)\n", dd->bLength, dd->bLength); -+ printk(" bDescriptortype: %d (0x%X)\n", dd->bDescriptorType, dd->bDescriptorType); -+ printk(" bcdUSB: %d (0x%X)\n", dd->bcdUSB, dd->bcdUSB); -+ printk(" bDeviceClass: %d (0x%X)\n", dd->bDeviceClass, dd->bDeviceClass); -+ printk(" bDeviceSubClass: %d (0x%X)\n", dd->bDeviceSubClass, dd->bDeviceSubClass); -+ printk(" bDeviceProtocol: %d (0x%X)\n", dd->bDeviceProtocol, dd->bDeviceProtocol); -+ printk(" bMaxPacketSize0: %d (0x%X)\n", dd->bMaxPacketSize0, dd->bMaxPacketSize0); -+ printk(" idVendor: %d (0x%X)\n", dd->idVendor, dd->idVendor); -+ printk(" idProduct: %d (0x%X)\n", dd->idProduct, dd->idProduct); -+ printk(" bcdDevice: %d (0x%X)\n", dd->bcdDevice, dd->bcdDevice); -+ printk(" iManufacturer: %d (0x%X)\n", dd->iManufacturer, dd->iManufacturer); -+ printk(" iProduct: %d (0x%X)\n", dd->iProduct, dd->iProduct); -+ printk(" iSerialNumber: %d (0x%X)\n", dd->iSerialNumber, dd->iSerialNumber); -+ printk(" bNumConfigurations: %d (0x%X)\n", dd->bNumConfigurations, dd->bNumConfigurations); -+} -+#endif /* UNUSED */ -+ -+#endif /* ACX_DEBUG */ -Index: linux-2.6.23/drivers/net/wireless/acx/wlan.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/wlan.c 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,424 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** This code is based on elements which are -+** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -+** info@linux-wlan.com -+** http://www.linux-wlan.com -+*/ -+ -+#include -+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) -+#include -+#endif -+#include -+#include -+#include -+#include -+ -+#include "acx.h" -+ -+ -+/*********************************************************************** -+*/ -+#define LOG_BAD_EID(hdr,len,ie_ptr) acx_log_bad_eid(hdr, len, ((wlan_ie_t*)ie_ptr)) -+ -+#define IE_EID(ie_ptr) (((wlan_ie_t*)(ie_ptr))->eid) -+#define IE_LEN(ie_ptr) (((wlan_ie_t*)(ie_ptr))->len) -+#define OFFSET(hdr,off) (WLAN_HDR_A3_DATAP(hdr) + (off)) -+ -+ -+/*********************************************************************** -+** wlan_mgmt_decode_XXX -+** -+** Given a complete frame in f->hdr, sets the pointers in f to -+** the areas that correspond to the parts of the frame. -+** -+** Assumptions: -+** 1) f->len and f->hdr are already set -+** 2) f->len is the length of the MAC header + data, the FCS -+** is NOT included -+** 3) all members except len and hdr are zero -+** Arguments: -+** f frame structure -+** -+** Returns: -+** nothing -+** -+** Side effects: -+** frame structure members are pointing at their -+** respective portions of the frame buffer. -+*/ -+void -+wlan_mgmt_decode_beacon(wlan_fr_beacon_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ f->type = WLAN_FSTYPE_BEACON; -+ -+ /*-- Fixed Fields ----*/ -+ f->ts = (u64 *) OFFSET(f->hdr, WLAN_BEACON_OFF_TS); -+ f->bcn_int = (u16 *) OFFSET(f->hdr, WLAN_BEACON_OFF_BCN_INT); -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_BEACON_OFF_CAPINFO); -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_BEACON_OFF_SSID); -+ while (ie_ptr < end) { -+ switch (IE_EID(ie_ptr)) { -+ case WLAN_EID_SSID: -+ f->ssid = (wlan_ie_ssid_t *) ie_ptr; -+ break; -+ case WLAN_EID_SUPP_RATES: -+ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_EXT_RATES: -+ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_FH_PARMS: -+ f->fh_parms = (wlan_ie_fh_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_DS_PARMS: -+ f->ds_parms = (wlan_ie_ds_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_CF_PARMS: -+ f->cf_parms = (wlan_ie_cf_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_IBSS_PARMS: -+ f->ibss_parms = (wlan_ie_ibss_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_TIM: -+ f->tim = (wlan_ie_tim_t *) ie_ptr; -+ break; -+ case WLAN_EID_ERP_INFO: -+ f->erp = (wlan_ie_erp_t *) ie_ptr; -+ break; -+ -+ case WLAN_EID_COUNTRY: -+ /* was seen: 07 06 47 42 20 01 0D 14 */ -+ case WLAN_EID_PWR_CONSTRAINT: -+ /* was seen by Ashwin Mansinghka from -+ Atheros-based PCI card in AP mode using madwifi drivers: */ -+ /* 20 01 00 */ -+ case WLAN_EID_NONERP: -+ /* was seen from WRT54GS with OpenWrt: 2F 01 07 */ -+ case WLAN_EID_UNKNOWN128: -+ /* was seen by Jacek Jablonski from Orinoco AP */ -+ /* 80 06 00 60 1D 2C 3B 00 */ -+ case WLAN_EID_UNKNOWN133: -+ /* was seen by David Bronaugh from ???? */ -+ /* 85 1E 00 00 84 12 07 00 FF 00 11 00 61 70 63 31 */ -+ /* 63 73 72 30 34 32 00 00 00 00 00 00 00 00 00 25 */ -+ case WLAN_EID_UNKNOWN223: -+ /* was seen by Carlos Martin from ???? */ -+ /* DF 20 01 1E 04 00 00 00 06 63 09 02 FF 0F 30 30 */ -+ /* 30 42 36 42 33 34 30 39 46 31 00 00 00 00 00 00 00 00 */ -+ case WLAN_EID_GENERIC: -+ /* WPA: hostap code: -+ if (pos[1] >= 4 && -+ pos[2] == 0x00 && pos[3] == 0x50 && -+ pos[4] == 0xf2 && pos[5] == 1) { -+ wpa = pos; -+ wpa_len = pos[1] + 2; -+ } -+ TI x4 mode: seen DD 04 08 00 28 00 -+ (08 00 28 is TI's OUI) -+ last byte is probably 0/1 - disabled/enabled -+ */ -+ case WLAN_EID_RSN: -+ /* hostap does something with it: -+ rsn = pos; -+ rsn_len = pos[1] + 2; -+ */ -+ break; -+ -+ default: -+ LOG_BAD_EID(f->hdr, f->len, ie_ptr); -+ break; -+ } -+ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); -+ } -+} -+ -+ -+#ifdef UNUSED -+void wlan_mgmt_decode_ibssatim(wlan_fr_ibssatim_t * f) -+{ -+ f->type = WLAN_FSTYPE_ATIM; -+ /*-- Fixed Fields ----*/ -+ /*-- Information elements */ -+} -+#endif /* UNUSED */ -+ -+void -+wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t * f) -+{ -+ f->type = WLAN_FSTYPE_DISASSOC; -+ -+ /*-- Fixed Fields ----*/ -+ f->reason = (u16 *) OFFSET(f->hdr, WLAN_DISASSOC_OFF_REASON); -+ -+ /*-- Information elements */ -+} -+ -+ -+void -+wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ -+ f->type = WLAN_FSTYPE_ASSOCREQ; -+ -+ /*-- Fixed Fields ----*/ -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_CAP_INFO); -+ f->listen_int = (u16 *) OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_LISTEN_INT); -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_SSID); -+ while (ie_ptr < end) { -+ switch (IE_EID(ie_ptr)) { -+ case WLAN_EID_SSID: -+ f->ssid = (wlan_ie_ssid_t *) ie_ptr; -+ break; -+ case WLAN_EID_SUPP_RATES: -+ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_EXT_RATES: -+ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ default: -+ LOG_BAD_EID(f->hdr, f->len, ie_ptr); -+ break; -+ } -+ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); -+ } -+} -+ -+ -+void -+wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t * f) -+{ -+ f->type = WLAN_FSTYPE_ASSOCRESP; -+ -+ /*-- Fixed Fields ----*/ -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_CAP_INFO); -+ f->status = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_STATUS); -+ f->aid = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_AID); -+ -+ /*-- Information elements */ -+ f->supp_rates = (wlan_ie_supp_rates_t *) -+ OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_SUPP_RATES); -+} -+ -+ -+#ifdef UNUSED -+void -+wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ f->type = WLAN_FSTYPE_REASSOCREQ; -+ -+ /*-- Fixed Fields ----*/ -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_CAP_INFO); -+ f->listen_int = (u16 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_LISTEN_INT); -+ f->curr_ap = (u8 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_CURR_AP); -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_SSID); -+ while (ie_ptr < end) { -+ switch (IE_EID(ie_ptr)) { -+ case WLAN_EID_SSID: -+ f->ssid = (wlan_ie_ssid_t *) ie_ptr; -+ break; -+ case WLAN_EID_SUPP_RATES: -+ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_EXT_RATES: -+ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ default: -+ LOG_BAD_EID(f->hdr, f->len, ie_ptr); -+ break; -+ } -+ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); -+ } -+} -+ -+ -+void -+wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t * f) -+{ -+ f->type = WLAN_FSTYPE_REASSOCRESP; -+ -+ /*-- Fixed Fields ----*/ -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_CAP_INFO); -+ f->status = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_STATUS); -+ f->aid = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_AID); -+ -+ /*-- Information elements */ -+ f->supp_rates = (wlan_ie_supp_rates_t *) -+ OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_SUPP_RATES); -+} -+ -+ -+void -+wlan_mgmt_decode_probereq(wlan_fr_probereq_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ f->type = WLAN_FSTYPE_PROBEREQ; -+ -+ /*-- Fixed Fields ----*/ -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_PROBEREQ_OFF_SSID); -+ while (ie_ptr < end) { -+ switch (IE_EID(ie_ptr)) { -+ case WLAN_EID_SSID: -+ f->ssid = (wlan_ie_ssid_t *) ie_ptr; -+ break; -+ case WLAN_EID_SUPP_RATES: -+ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_EXT_RATES: -+ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ default: -+ LOG_BAD_EID(f->hdr, f->len, ie_ptr); -+ break; -+ } -+ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); -+ } -+} -+#endif /* UNUSED */ -+ -+ -+/* TODO: decoding of beacon and proberesp can be merged (similar structure) */ -+void -+wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ f->type = WLAN_FSTYPE_PROBERESP; -+ -+ /*-- Fixed Fields ----*/ -+ f->ts = (u64 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_TS); -+ f->bcn_int = (u16 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_BCN_INT); -+ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_CAP_INFO); -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_PROBERESP_OFF_SSID); -+ while (ie_ptr < end) { -+ switch (IE_EID(ie_ptr)) { -+ case WLAN_EID_SSID: -+ f->ssid = (wlan_ie_ssid_t *) ie_ptr; -+ break; -+ case WLAN_EID_SUPP_RATES: -+ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_EXT_RATES: -+ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; -+ break; -+ case WLAN_EID_FH_PARMS: -+ f->fh_parms = (wlan_ie_fh_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_DS_PARMS: -+ f->ds_parms = (wlan_ie_ds_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_CF_PARMS: -+ f->cf_parms = (wlan_ie_cf_parms_t *) ie_ptr; -+ break; -+ case WLAN_EID_IBSS_PARMS: -+ f->ibss_parms = (wlan_ie_ibss_parms_t *) ie_ptr; -+ break; -+#ifdef DONT_DO_IT_ADD_REAL_HANDLING_INSTEAD -+ case WLAN_EID_COUNTRY: -+ break; -+ ... -+#endif -+#ifdef SENT_HERE_BY_OPENWRT -+ /* should those be trapped or handled?? */ -+ case WLAN_EID_ERP_INFO: -+ break; -+ case WLAN_EID_NONERP: -+ break; -+ case WLAN_EID_GENERIC: -+ break; -+#endif -+ default: -+ LOG_BAD_EID(f->hdr, f->len, ie_ptr); -+ break; -+ } -+ -+ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); -+ } -+} -+ -+ -+void -+wlan_mgmt_decode_authen(wlan_fr_authen_t * f) -+{ -+ u8 *ie_ptr; -+ u8 *end = (u8*)f->hdr + f->len; -+ -+ f->type = WLAN_FSTYPE_AUTHEN; -+ -+ /*-- Fixed Fields ----*/ -+ f->auth_alg = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_AUTH_ALG); -+ f->auth_seq = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_AUTH_SEQ); -+ f->status = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_STATUS); -+ -+ /*-- Information elements */ -+ ie_ptr = OFFSET(f->hdr, WLAN_AUTHEN_OFF_CHALLENGE); -+ if ((ie_ptr < end) && (IE_EID(ie_ptr) == WLAN_EID_CHALLENGE)) { -+ f->challenge = (wlan_ie_challenge_t *) ie_ptr; -+ } -+} -+ -+ -+void -+wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t * f) -+{ -+ f->type = WLAN_FSTYPE_DEAUTHEN; -+ -+ /*-- Fixed Fields ----*/ -+ f->reason = (u16 *) OFFSET(f->hdr, WLAN_DEAUTHEN_OFF_REASON); -+ -+ /*-- Information elements */ -+} -Index: linux-2.6.23/drivers/net/wireless/acx/wlan_compat.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/wlan_compat.h 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,260 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** This code is based on elements which are -+** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -+** info@linux-wlan.com -+** http://www.linux-wlan.com -+*/ -+ -+/*=============================================================*/ -+/*------ Establish Platform Identity --------------------------*/ -+/*=============================================================*/ -+/* Key macros: */ -+/* WLAN_CPU_FAMILY */ -+#define WLAN_Ix86 1 -+#define WLAN_PPC 2 -+#define WLAN_Ix96 3 -+#define WLAN_ARM 4 -+#define WLAN_ALPHA 5 -+#define WLAN_MIPS 6 -+#define WLAN_HPPA 7 -+#define WLAN_SPARC 8 -+#define WLAN_SH 9 -+#define WLAN_x86_64 10 -+/* WLAN_CPU_CORE */ -+#define WLAN_I386CORE 1 -+#define WLAN_PPCCORE 2 -+#define WLAN_I296 3 -+#define WLAN_ARMCORE 4 -+#define WLAN_ALPHACORE 5 -+#define WLAN_MIPSCORE 6 -+#define WLAN_HPPACORE 7 -+/* WLAN_CPU_PART */ -+#define WLAN_I386PART 1 -+#define WLAN_MPC860 2 -+#define WLAN_MPC823 3 -+#define WLAN_I296SA 4 -+#define WLAN_PPCPART 5 -+#define WLAN_ARMPART 6 -+#define WLAN_ALPHAPART 7 -+#define WLAN_MIPSPART 8 -+#define WLAN_HPPAPART 9 -+/* WLAN_SYSARCH */ -+#define WLAN_PCAT 1 -+#define WLAN_MBX 2 -+#define WLAN_RPX 3 -+#define WLAN_LWARCH 4 -+#define WLAN_PMAC 5 -+#define WLAN_SKIFF 6 -+#define WLAN_BITSY 7 -+#define WLAN_ALPHAARCH 7 -+#define WLAN_MIPSARCH 9 -+#define WLAN_HPPAARCH 10 -+/* WLAN_HOSTIF (generally set on the command line, not detected) */ -+#define WLAN_PCMCIA 1 -+#define WLAN_ISA 2 -+#define WLAN_PCI 3 -+#define WLAN_USB 4 -+#define WLAN_PLX 5 -+ -+/* Note: the PLX HOSTIF above refers to some vendors implementations for */ -+/* PCI. It's a PLX chip that is a PCI to PCMCIA adapter, but it */ -+/* isn't a real PCMCIA host interface adapter providing all the */ -+/* card&socket services. */ -+ -+#ifdef __powerpc__ -+#ifndef __ppc__ -+#define __ppc__ -+#endif -+#endif -+ -+#if (defined(CONFIG_PPC) || defined(CONFIG_8xx)) -+#ifndef __ppc__ -+#define __ppc__ -+#endif -+#endif -+ -+#if defined(__x86_64__) -+ #define WLAN_CPU_FAMILY WLAN_x86_64 -+ #define WLAN_SYSARCH WLAN_PCAT -+#elif defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__) -+ #define WLAN_CPU_FAMILY WLAN_Ix86 -+ #define WLAN_CPU_CORE WLAN_I386CORE -+ #define WLAN_CPU_PART WLAN_I386PART -+ #define WLAN_SYSARCH WLAN_PCAT -+#elif defined(__ppc__) -+ #define WLAN_CPU_FAMILY WLAN_PPC -+ #define WLAN_CPU_CORE WLAN_PPCCORE -+ #if defined(CONFIG_MBX) -+ #define WLAN_CPU_PART WLAN_MPC860 -+ #define WLAN_SYSARCH WLAN_MBX -+ #elif defined(CONFIG_RPXLITE) -+ #define WLAN_CPU_PART WLAN_MPC823 -+ #define WLAN_SYSARCH WLAN_RPX -+ #elif defined(CONFIG_RPXCLASSIC) -+ #define WLAN_CPU_PART WLAN_MPC860 -+ #define WLAN_SYSARCH WLAN_RPX -+ #else -+ #define WLAN_CPU_PART WLAN_PPCPART -+ #define WLAN_SYSARCH WLAN_PMAC -+ #endif -+#elif defined(__arm__) -+ #define WLAN_CPU_FAMILY WLAN_ARM -+ #define WLAN_CPU_CORE WLAN_ARMCORE -+ #define WLAN_CPU_PART WLAN_ARM_PART -+ #define WLAN_SYSARCH WLAN_SKIFF -+#elif defined(__alpha__) -+ #define WLAN_CPU_FAMILY WLAN_ALPHA -+ #define WLAN_CPU_CORE WLAN_ALPHACORE -+ #define WLAN_CPU_PART WLAN_ALPHAPART -+ #define WLAN_SYSARCH WLAN_ALPHAARCH -+#elif defined(__mips__) -+ #define WLAN_CPU_FAMILY WLAN_MIPS -+ #define WLAN_CPU_CORE WLAN_MIPSCORE -+ #define WLAN_CPU_PART WLAN_MIPSPART -+ #define WLAN_SYSARCH WLAN_MIPSARCH -+#elif defined(__hppa__) -+ #define WLAN_CPU_FAMILY WLAN_HPPA -+ #define WLAN_CPU_CORE WLAN_HPPACORE -+ #define WLAN_CPU_PART WLAN_HPPAPART -+ #define WLAN_SYSARCH WLAN_HPPAARCH -+#elif defined(__sparc__) -+ #define WLAN_CPU_FAMILY WLAN_SPARC -+ #define WLAN_SYSARCH WLAN_SPARC -+#elif defined(__sh__) -+ #define WLAN_CPU_FAMILY WLAN_SH -+ #define WLAN_SYSARCH WLAN_SHARCH -+ #ifndef __LITTLE_ENDIAN__ -+ #define __LITTLE_ENDIAN__ -+ #endif -+#else -+ #error "No CPU identified!" -+#endif -+ -+/* -+ Some big endian machines implicitly do all I/O in little endian mode. -+ -+ In particular: -+ Linux/PPC on PowerMacs (PCI) -+ Arm/Intel Xscale (PCI) -+ -+ This may also affect PLX boards and other BE &| PPC platforms; -+ as new ones are discovered, add them below. -+*/ -+ -+#if ((WLAN_SYSARCH == WLAN_SKIFF) || (WLAN_SYSARCH == WLAN_PMAC)) -+#define REVERSE_ENDIAN -+#endif -+ -+/*=============================================================*/ -+/*------ Hardware Portability Macros --------------------------*/ -+/*=============================================================*/ -+#if (WLAN_CPU_FAMILY == WLAN_PPC) -+#define wlan_inw(a) in_be16((unsigned short *)((a)+_IO_BASE)) -+#define wlan_inw_le16_to_cpu(a) inw((a)) -+#define wlan_outw(v,a) out_be16((unsigned short *)((a)+_IO_BASE), (v)) -+#define wlan_outw_cpu_to_le16(v,a) outw((v),(a)) -+#else -+#define wlan_inw(a) inw((a)) -+#define wlan_inw_le16_to_cpu(a) __cpu_to_le16(inw((a))) -+#define wlan_outw(v,a) outw((v),(a)) -+#define wlan_outw_cpu_to_le16(v,a) outw(__cpu_to_le16((v)),(a)) -+#endif -+ -+/*=============================================================*/ -+/*------ Bit settings -----------------------------------------*/ -+/*=============================================================*/ -+#define ieee2host16(n) __le16_to_cpu(n) -+#define ieee2host32(n) __le32_to_cpu(n) -+#define host2ieee16(n) __cpu_to_le16(n) -+#define host2ieee32(n) __cpu_to_le32(n) -+ -+/* for constants */ -+#ifdef __LITTLE_ENDIAN -+ #define IEEE16(a,n) a = n, a##i = n, -+#else -+ #ifdef __BIG_ENDIAN -+ /* shifts would produce gcc warnings. Oh well... */ -+ #define IEEE16(a,n) a = n, a##i = ((n&0xff)*256 + ((n&0xff00)/256)), -+ #else -+ #error give me endianness or give me death -+ #endif -+#endif -+ -+/*=============================================================*/ -+/*------ Compiler Portability Macros --------------------------*/ -+/*=============================================================*/ -+#define WLAN_PACKED __attribute__ ((packed)) -+ -+/* Interrupt handler backwards compatibility stuff */ -+#ifndef IRQ_NONE -+#define IRQ_NONE -+#define IRQ_HANDLED -+typedef void irqreturn_t; -+#endif -+ -+#ifndef ARPHRD_IEEE80211_PRISM -+#define ARPHRD_IEEE80211_PRISM 802 -+#endif -+ -+#define ETH_P_80211_RAW (ETH_P_ECONET + 1) -+ -+/*============================================================================* -+ * Constants * -+ *============================================================================*/ -+#define WLAN_IEEE_OUI_LEN 3 -+ -+/*============================================================================* -+ * Types * -+ *============================================================================*/ -+ -+/* local ether header type */ -+typedef struct wlan_ethhdr { -+ u8 daddr[ETH_ALEN]; -+ u8 saddr[ETH_ALEN]; -+ u16 type; -+} WLAN_PACKED wlan_ethhdr_t; -+ -+/* local llc header type */ -+typedef struct wlan_llc { -+ u8 dsap; -+ u8 ssap; -+ u8 ctl; -+} WLAN_PACKED wlan_llc_t; -+ -+/* local snap header type */ -+typedef struct wlan_snap { -+ u8 oui[WLAN_IEEE_OUI_LEN]; -+ u16 type; -+} WLAN_PACKED wlan_snap_t; -Index: linux-2.6.23/drivers/net/wireless/acx/wlan_hdr.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/wlan_hdr.h 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,497 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** This code is based on elements which are -+** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -+** info@linux-wlan.com -+** http://www.linux-wlan.com -+*/ -+ -+/* mini-doc -+ -+Here are all 11b/11g/11a rates and modulations: -+ -+ 11b 11g 11a -+ --- --- --- -+ 1 |B |B | -+ 2 |Q |Q | -+ 5.5|Cp |C p| -+ 6 | |Od |O -+ 9 | |od |o -+11 |Cp |C p| -+12 | |Od |O -+18 | |od |o -+22 | | p| -+24 | |Od |O -+33 | | p| -+36 | |od |o -+48 | |od |o -+54 | |od |o -+ -+Mandatory: -+ B - DBPSK (Differential Binary Phase Shift Keying) -+ Q - DQPSK (Differential Quaternary Phase Shift Keying) -+ C - CCK (Complementary Code Keying, a form of DSSS -+ (Direct Sequence Spread Spectrum) modulation) -+ O - OFDM (Orthogonal Frequency Division Multiplexing) -+Optional: -+ o - OFDM -+ d - CCK-OFDM (also known as DSSS-OFDM) -+ p - PBCC (Packet Binary Convolutional Coding) -+ -+The term CCK-OFDM may be used interchangeably with DSSS-OFDM -+(the IEEE 802.11g-2003 standard uses the latter terminology). -+In the CCK-OFDM, the PLCP header of the frame uses the CCK form of DSSS, -+while the PLCP payload (the MAC frame) is modulated using OFDM. -+ -+Basically, you must use CCK-OFDM if you have mixed 11b/11g environment, -+or else (pure OFDM) 11b equipment may not realize that AP -+is sending a packet and start sending its own one. -+Sadly, looks like acx111 does not support CCK-OFDM, only pure OFDM. -+ -+Re PBCC: avoid using it. It makes sense only if you have -+TI "11b+" hardware. You _must_ use PBCC in order to reach 22Mbps on it. -+ -+Preambles: -+ -+Long preamble (at 1Mbit rate, takes 144 us): -+ 16 bytes ones -+ 2 bytes 0xF3A0 (lsb sent first) -+PLCP header follows (at 1Mbit also): -+ 1 byte Signal: speed, in 0.1Mbit units, except for: -+ 33Mbit: 33 (instead of 330 - doesn't fit in octet) -+ all CCK-OFDM rates: 30 -+ 1 byte Service -+ 0,1,4: reserved -+ 2: 1=locked clock -+ 3: 1=PBCC -+ 5: Length Extension (PBCC 22,33Mbit (11g only)) <- -+ 6: Length Extension (PBCC 22,33Mbit (11g only)) <- BLACK MAGIC HERE -+ 7: Length Extension <- -+ 2 bytes Length (time needed to tx this frame) -+ a) 5.5 Mbit/s CCK -+ Length = octets*8/5.5, rounded up to integer -+ b) 11 Mbit/s CCK -+ Length = octets*8/11, rounded up to integer -+ Service bit 7: -+ 0 = rounding took less than 8/11 -+ 1 = rounding took more than or equal to 8/11 -+ c) 5.5 Mbit/s PBCC -+ Length = (octets+1)*8/5.5, rounded up to integer -+ d) 11 Mbit/s PBCC -+ Length = (octets+1)*8/11, rounded up to integer -+ Service bit 7: -+ 0 = rounding took less than 8/11 -+ 1 = rounding took more than or equal to 8/11 -+ e) 22 Mbit/s PBCC -+ Length = (octets+1)*8/22, rounded up to integer -+ Service bits 6,7: -+ 00 = rounding took less than 8/22ths -+ 01 = rounding took 8/22...15/22ths -+ 10 = rounding took 16/22ths or more. -+ f) 33 Mbit/s PBCC -+ Length = (octets+1)*8/33, rounded up to integer -+ Service bits 5,6,7: -+ 000 rounding took less than 8/33 -+ 001 rounding took 8/33...15/33 -+ 010 rounding took 16/33...23/33 -+ 011 rounding took 24/33...31/33 -+ 100 rounding took 32/33 or more -+ 2 bytes CRC -+ -+PSDU follows (up to 2346 bytes at selected rate) -+ -+While Signal value alone is not enough to determine rate and modulation, -+Signal+Service is always sufficient. -+ -+Short preamble (at 1Mbit rate, takes 72 us): -+ 7 bytes zeroes -+ 2 bytes 0x05CF (lsb sent first) -+PLCP header follows *at 2Mbit/s*. Format is the same as in long preamble. -+PSDU follows (up to 2346 bytes at selected rate) -+ -+OFDM preamble is completely different, uses OFDM -+modulation from the start and thus easily identifiable. -+Not shown here. -+*/ -+ -+ -+/*********************************************************************** -+** Constants -+*/ -+ -+#define WLAN_HDR_A3_LEN 24 -+#define WLAN_HDR_A4_LEN 30 -+/* IV structure: -+** 3 bytes: Initialization Vector (24 bits) -+** 1 byte: 0..5: padding, must be 0; 6..7: key selector (0-3) -+*/ -+#define WLAN_WEP_IV_LEN 4 -+/* 802.11 says 2312 but looks like 2312 is a max size of _WEPed data_ */ -+#define WLAN_DATA_MAXLEN 2304 -+#define WLAN_WEP_ICV_LEN 4 -+#define WLAN_FCS_LEN 4 -+#define WLAN_A3FR_MAXLEN (WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN) -+#define WLAN_A4FR_MAXLEN (WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN) -+#define WLAN_A3FR_MAXLEN_FCS (WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN + 4) -+#define WLAN_A4FR_MAXLEN_FCS (WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + 4) -+#define WLAN_A3FR_MAXLEN_WEP (WLAN_A3FR_MAXLEN + 8) -+#define WLAN_A4FR_MAXLEN_WEP (WLAN_A4FR_MAXLEN + 8) -+#define WLAN_A3FR_MAXLEN_WEP_FCS (WLAN_A3FR_MAXLEN_FCS + 8) -+#define WLAN_A4FR_MAXLEN_WEP_FCS (WLAN_A4FR_MAXLEN_FCS + 8) -+ -+#define WLAN_BSS_TS_LEN 8 -+#define WLAN_SSID_MAXLEN 32 -+#define WLAN_BEACON_FR_MAXLEN (WLAN_HDR_A3_LEN + 334) -+#define WLAN_ATIM_FR_MAXLEN (WLAN_HDR_A3_LEN + 0) -+#define WLAN_DISASSOC_FR_MAXLEN (WLAN_HDR_A3_LEN + 2) -+#define WLAN_ASSOCREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 48) -+#define WLAN_ASSOCRESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 16) -+#define WLAN_REASSOCREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 54) -+#define WLAN_REASSOCRESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 16) -+#define WLAN_PROBEREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 44) -+#define WLAN_PROBERESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 78) -+#define WLAN_AUTHEN_FR_MAXLEN (WLAN_HDR_A3_LEN + 261) -+#define WLAN_DEAUTHEN_FR_MAXLEN (WLAN_HDR_A3_LEN + 2) -+#define WLAN_CHALLENGE_IE_LEN 130 -+#define WLAN_CHALLENGE_LEN 128 -+#define WLAN_WEP_MAXKEYLEN 13 -+#define WLAN_WEP_NKEYS 4 -+ -+/*--- Frame Control Field -------------------------------------*/ -+/* Frame Types */ -+#define WLAN_FTYPE_MGMT 0x00 -+#define WLAN_FTYPE_CTL 0x01 -+#define WLAN_FTYPE_DATA 0x02 -+ -+/* Frame subtypes */ -+/* Management */ -+#define WLAN_FSTYPE_ASSOCREQ 0x00 -+#define WLAN_FSTYPE_ASSOCRESP 0x01 -+#define WLAN_FSTYPE_REASSOCREQ 0x02 -+#define WLAN_FSTYPE_REASSOCRESP 0x03 -+#define WLAN_FSTYPE_PROBEREQ 0x04 -+#define WLAN_FSTYPE_PROBERESP 0x05 -+#define WLAN_FSTYPE_BEACON 0x08 -+#define WLAN_FSTYPE_ATIM 0x09 -+#define WLAN_FSTYPE_DISASSOC 0x0a -+#define WLAN_FSTYPE_AUTHEN 0x0b -+#define WLAN_FSTYPE_DEAUTHEN 0x0c -+ -+/* Control */ -+#define WLAN_FSTYPE_PSPOLL 0x0a -+#define WLAN_FSTYPE_RTS 0x0b -+#define WLAN_FSTYPE_CTS 0x0c -+#define WLAN_FSTYPE_ACK 0x0d -+#define WLAN_FSTYPE_CFEND 0x0e -+#define WLAN_FSTYPE_CFENDCFACK 0x0f -+ -+/* Data */ -+#define WLAN_FSTYPE_DATAONLY 0x00 -+#define WLAN_FSTYPE_DATA_CFACK 0x01 -+#define WLAN_FSTYPE_DATA_CFPOLL 0x02 -+#define WLAN_FSTYPE_DATA_CFACK_CFPOLL 0x03 -+#define WLAN_FSTYPE_NULL 0x04 -+#define WLAN_FSTYPE_CFACK 0x05 -+#define WLAN_FSTYPE_CFPOLL 0x06 -+#define WLAN_FSTYPE_CFACK_CFPOLL 0x07 -+ -+/*--- FC Constants v. 2.0 ------------------------------------*/ -+/* Each constant is defined twice: WF_CONST is in host */ -+/* byteorder, WF_CONSTi is in ieee byteorder. */ -+/* Usage: */ -+/* printf("the frame subtype is %X", WF_FC_FTYPEi & rx.fc); */ -+/* tx.fc = WF_FTYPE_CTLi | WF_FSTYPE_RTSi; */ -+/*------------------------------------------------------------*/ -+ -+enum { -+/*--- Frame Control Field -------------------------------------*/ -+/* Protocol version: always 0 for current 802.11 standards */ -+IEEE16(WF_FC_PVER, 0x0003) -+IEEE16(WF_FC_FTYPE, 0x000c) -+IEEE16(WF_FC_FSTYPE, 0x00f0) -+IEEE16(WF_FC_TODS, 0x0100) -+IEEE16(WF_FC_FROMDS, 0x0200) -+IEEE16(WF_FC_FROMTODS, 0x0300) -+IEEE16(WF_FC_MOREFRAG, 0x0400) -+IEEE16(WF_FC_RETRY, 0x0800) -+/* Indicates PS mode in which STA will be after successful completion -+** of current frame exchange sequence. Always 0 for AP frames */ -+IEEE16(WF_FC_PWRMGT, 0x1000) -+/* What MoreData=1 means: -+** From AP to STA in PS mode: don't sleep yet, I have more frames for you -+** From Contention-Free (CF) Pollable STA in response to a CF-Poll: -+** STA has buffered frames for transmission in response to next CF-Poll -+** Bcast/mcast frames transmitted from AP: -+** when additional bcast/mcast frames remain to be transmitted by AP -+** during this beacon interval -+** In all other cases MoreData=0 */ -+IEEE16(WF_FC_MOREDATA, 0x2000) -+IEEE16(WF_FC_ISWEP, 0x4000) -+IEEE16(WF_FC_ORDER, 0x8000) -+ -+/* Frame Types */ -+IEEE16(WF_FTYPE_MGMT, 0x00) -+IEEE16(WF_FTYPE_CTL, 0x04) -+IEEE16(WF_FTYPE_DATA, 0x08) -+ -+/* Frame subtypes */ -+/* Management */ -+IEEE16(WF_FSTYPE_ASSOCREQ, 0x00) -+IEEE16(WF_FSTYPE_ASSOCRESP, 0x10) -+IEEE16(WF_FSTYPE_REASSOCREQ, 0x20) -+IEEE16(WF_FSTYPE_REASSOCRESP, 0x30) -+IEEE16(WF_FSTYPE_PROBEREQ, 0x40) -+IEEE16(WF_FSTYPE_PROBERESP, 0x50) -+IEEE16(WF_FSTYPE_BEACON, 0x80) -+IEEE16(WF_FSTYPE_ATIM, 0x90) -+IEEE16(WF_FSTYPE_DISASSOC, 0xa0) -+IEEE16(WF_FSTYPE_AUTHEN, 0xb0) -+IEEE16(WF_FSTYPE_DEAUTHEN, 0xc0) -+ -+/* Control */ -+IEEE16(WF_FSTYPE_PSPOLL, 0xa0) -+IEEE16(WF_FSTYPE_RTS, 0xb0) -+IEEE16(WF_FSTYPE_CTS, 0xc0) -+IEEE16(WF_FSTYPE_ACK, 0xd0) -+IEEE16(WF_FSTYPE_CFEND, 0xe0) -+IEEE16(WF_FSTYPE_CFENDCFACK, 0xf0) -+ -+/* Data */ -+IEEE16(WF_FSTYPE_DATAONLY, 0x00) -+IEEE16(WF_FSTYPE_DATA_CFACK, 0x10) -+IEEE16(WF_FSTYPE_DATA_CFPOLL, 0x20) -+IEEE16(WF_FSTYPE_DATA_CFACK_CFPOLL, 0x30) -+IEEE16(WF_FSTYPE_NULL, 0x40) -+IEEE16(WF_FSTYPE_CFACK, 0x50) -+IEEE16(WF_FSTYPE_CFPOLL, 0x60) -+IEEE16(WF_FSTYPE_CFACK_CFPOLL, 0x70) -+}; -+ -+ -+/*********************************************************************** -+** Macros -+*/ -+ -+/*--- Duration Macros ----------------------------------------*/ -+/* Macros to get/set the bitfields of the Duration Field */ -+/* - the duration value is only valid when bit15 is zero */ -+/* - the firmware handles these values, so I'm not going */ -+/* to use these macros right now. */ -+/*------------------------------------------------------------*/ -+ -+/*--- Sequence Control Macros -------------------------------*/ -+/* Macros to get/set the bitfields of the Sequence Control */ -+/* Field. */ -+/*------------------------------------------------------------*/ -+#define WLAN_GET_SEQ_FRGNUM(n) ((u16)(n) & 0x000f) -+#define WLAN_GET_SEQ_SEQNUM(n) (((u16)(n) & 0xfff0) >> 4) -+ -+/*--- Data ptr macro -----------------------------------------*/ -+/* Creates a u8* to the data portion of a frame */ -+/* Assumes you're passing in a ptr to the beginning of the hdr*/ -+/*------------------------------------------------------------*/ -+#define WLAN_HDR_A3_DATAP(p) (((u8*)(p)) + WLAN_HDR_A3_LEN) -+#define WLAN_HDR_A4_DATAP(p) (((u8*)(p)) + WLAN_HDR_A4_LEN) -+ -+ -+/*********************************************************************** -+** Types -+*/ -+ -+/* 802.11 header type -+** -+** Note the following: -+** a1 *always* is receiver's mac or bcast/mcast -+** a2 *always* is transmitter's mac, if a2 exists -+** seq: [0:3] frag#, [4:15] seq# - used for dup detection -+** (dups from retries have same seq#) */ -+typedef struct wlan_hdr { -+ u16 fc; -+ u16 dur; -+ u8 a1[ETH_ALEN]; -+ u8 a2[ETH_ALEN]; -+ u8 a3[ETH_ALEN]; -+ u16 seq; -+ u8 a4[ETH_ALEN]; -+} WLAN_PACKED wlan_hdr_t; -+ -+/* Separate structs for use if frame type is known */ -+typedef struct wlan_hdr_a3 { -+ u16 fc; -+ u16 dur; -+ u8 a1[ETH_ALEN]; -+ u8 a2[ETH_ALEN]; -+ u8 a3[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED wlan_hdr_a3_t; -+ -+typedef struct wlan_hdr_mgmt { -+ u16 fc; -+ u16 dur; -+ u8 da[ETH_ALEN]; -+ u8 sa[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED wlan_hdr_mgmt_t; -+ -+#ifdef NOT_NEEDED_YET -+typedef struct { /* ad-hoc peer->peer (to/from DS = 0/0) */ -+ u16 fc; -+ u16 dur; -+ u8 da[ETH_ALEN]; -+ u8 sa[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED ibss; -+typedef struct { /* ap->sta (to/from DS = 0/1) */ -+ u16 fc; -+ u16 dur; -+ u8 da[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+ u8 sa[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED fromap; -+typedef struct { /* sta->ap (to/from DS = 1/0) */ -+ u16 fc; -+ u16 dur; -+ u8 bssid[ETH_ALEN]; -+ u8 sa[ETH_ALEN]; -+ u8 da[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED toap; -+typedef struct { /* wds->wds (to/from DS = 1/1), the only 4addr pkt */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+ u8 ta[ETH_ALEN]; -+ u8 da[ETH_ALEN]; -+ u16 seq; -+ u8 sa[ETH_ALEN]; -+} WLAN_PACKED wds; -+typedef struct { /* all management packets */ -+ u16 fc; -+ u16 dur; -+ u8 da[ETH_ALEN]; -+ u8 sa[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+ u16 seq; -+} WLAN_PACKED mgmt; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+ u8 ta[ETH_ALEN]; -+} WLAN_PACKED rts; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+} WLAN_PACKED cts; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+} WLAN_PACKED ack; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ /* NB: this one holds Assoc ID in dur field: */ -+ u16 aid; -+ u8 bssid[ETH_ALEN]; -+ u8 ta[ETH_ALEN]; -+} WLAN_PACKED pspoll; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+} WLAN_PACKED cfend; -+typedef struct { /* has no body, just a FCS */ -+ u16 fc; -+ u16 dur; -+ u8 ra[ETH_ALEN]; -+ u8 bssid[ETH_ALEN]; -+} WLAN_PACKED cfendcfack; -+#endif -+ -+/* Prism header emulation (monitor mode) */ -+typedef struct wlanitem_u32 { -+ u32 did; -+ u16 status; -+ u16 len; -+ u32 data; -+} WLAN_PACKED wlanitem_u32_t; -+#define WLANITEM_STATUS_data_ok 0 -+#define WLANITEM_STATUS_no_value 1 -+#define WLANITEM_STATUS_invalid_itemname 2 -+#define WLANITEM_STATUS_invalid_itemdata 3 -+#define WLANITEM_STATUS_missing_itemdata 4 -+#define WLANITEM_STATUS_incomplete_itemdata 5 -+#define WLANITEM_STATUS_invalid_msg_did 6 -+#define WLANITEM_STATUS_invalid_mib_did 7 -+#define WLANITEM_STATUS_missing_conv_func 8 -+#define WLANITEM_STATUS_string_too_long 9 -+#define WLANITEM_STATUS_data_out_of_range 10 -+#define WLANITEM_STATUS_string_too_short 11 -+#define WLANITEM_STATUS_missing_valid_func 12 -+#define WLANITEM_STATUS_unknown 13 -+#define WLANITEM_STATUS_invalid_did 14 -+#define WLANITEM_STATUS_missing_print_func 15 -+ -+#define WLAN_DEVNAMELEN_MAX 16 -+typedef struct wlansniffrm { -+ u32 msgcode; -+ u32 msglen; -+ u8 devname[WLAN_DEVNAMELEN_MAX]; -+ wlanitem_u32_t hosttime; -+ wlanitem_u32_t mactime; -+ wlanitem_u32_t channel; -+ wlanitem_u32_t rssi; -+ wlanitem_u32_t sq; -+ wlanitem_u32_t signal; -+ wlanitem_u32_t noise; -+ wlanitem_u32_t rate; -+ wlanitem_u32_t istx; /* tx? 0:no 1:yes */ -+ wlanitem_u32_t frmlen; -+} WLAN_PACKED wlansniffrm_t; -+#define WLANSNIFFFRM 0x0041 -+#define WLANSNIFFFRM_hosttime 0x1041 -+#define WLANSNIFFFRM_mactime 0x2041 -+#define WLANSNIFFFRM_channel 0x3041 -+#define WLANSNIFFFRM_rssi 0x4041 -+#define WLANSNIFFFRM_sq 0x5041 -+#define WLANSNIFFFRM_signal 0x6041 -+#define WLANSNIFFFRM_noise 0x7041 -+#define WLANSNIFFFRM_rate 0x8041 -+#define WLANSNIFFFRM_istx 0x9041 -+#define WLANSNIFFFRM_frmlen 0xA041 -Index: linux-2.6.23/drivers/net/wireless/acx/wlan_mgmt.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/acx/wlan_mgmt.h 2008-01-20 21:13:40.000000000 +0000 -@@ -0,0 +1,582 @@ -+/*********************************************************************** -+** Copyright (C) 2003 ACX100 Open Source Project -+** -+** The contents of this file are subject to the Mozilla Public -+** License Version 1.1 (the "License"); you may not use this file -+** except in compliance with the License. You may obtain a copy of -+** the License at http://www.mozilla.org/MPL/ -+** -+** Software distributed under the License is distributed on an "AS -+** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -+** implied. See the License for the specific language governing -+** rights and limitations under the License. -+** -+** Alternatively, the contents of this file may be used under the -+** terms of the GNU Public License version 2 (the "GPL"), in which -+** case the provisions of the GPL are applicable instead of the -+** above. If you wish to allow the use of your version of this file -+** only under the terms of the GPL and not to allow others to use -+** your version of this file under the MPL, indicate your decision -+** by deleting the provisions above and replace them with the notice -+** and other provisions required by the GPL. If you do not delete -+** the provisions above, a recipient may use your version of this -+** file under either the MPL or the GPL. -+** --------------------------------------------------------------------- -+** Inquiries regarding the ACX100 Open Source Project can be -+** made directly to: -+** -+** acx100-users@lists.sf.net -+** http://acx100.sf.net -+** --------------------------------------------------------------------- -+*/ -+ -+/*********************************************************************** -+** This code is based on elements which are -+** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -+** info@linux-wlan.com -+** http://www.linux-wlan.com -+*/ -+ -+/*********************************************************************** -+** Constants -+*/ -+ -+/*-- Information Element IDs --------------------*/ -+#define WLAN_EID_SSID 0 -+#define WLAN_EID_SUPP_RATES 1 -+#define WLAN_EID_FH_PARMS 2 -+#define WLAN_EID_DS_PARMS 3 -+#define WLAN_EID_CF_PARMS 4 -+#define WLAN_EID_TIM 5 -+#define WLAN_EID_IBSS_PARMS 6 -+#define WLAN_EID_COUNTRY 7 /* 802.11d */ -+#define WLAN_EID_FH_HOP_PARMS 8 /* 802.11d */ -+#define WLAN_EID_FH_TABLE 9 /* 802.11d */ -+#define WLAN_EID_REQUEST 10 /* 802.11d */ -+/*-- values 11-15 reserved --*/ -+#define WLAN_EID_CHALLENGE 16 -+/*-- values 17-31 reserved for challenge text extension --*/ -+#define WLAN_EID_PWR_CONSTRAINT 32 /* 11h PowerConstraint */ -+#define WLAN_EID_ERP_INFO 42 /* was seen from WRT54GS with OpenWrt */ -+#define WLAN_EID_NONERP 47 /* was seen from WRT54GS with OpenWrt */ -+#define WLAN_EID_RSN 48 -+#define WLAN_EID_EXT_RATES 50 -+#define WLAN_EID_UNKNOWN128 128 -+#define WLAN_EID_UNKNOWN133 133 -+#define WLAN_EID_GENERIC 221 /* was seen from WRT54GS with OpenWrt */ -+#define WLAN_EID_UNKNOWN223 223 -+ -+#if 0 -+#define WLAN_EID_PWR_CAP 33 /* 11h PowerCapability */ -+#define WLAN_EID_TPC_REQUEST 34 /* 11h TPC Request */ -+#define WLAN_EID_TPC_REPORT 35 /* 11h TPC Report */ -+#define WLAN_EID_SUPP_CHANNELS 36 /* 11h Supported Channels */ -+#define WLAN_EID_CHANNEL_SWITCH 37 /* 11h ChannelSwitch */ -+#define WLAN_EID_MEASURE_REQUEST 38 /* 11h MeasurementRequest */ -+#define WLAN_EID_MEASURE_REPORT 39 /* 11h MeasurementReport */ -+#define WLAN_EID_QUIET_ID 40 /* 11h Quiet */ -+#define WLAN_EID_IBSS_DFS_ID 41 /* 11h IBSS_DFS */ -+#endif -+ -+/*-- Reason Codes -------------------------------*/ -+#define WLAN_MGMT_REASON_RSVD 0 -+#define WLAN_MGMT_REASON_UNSPEC 1 -+#define WLAN_MGMT_REASON_PRIOR_AUTH_INVALID 2 -+#define WLAN_MGMT_REASON_DEAUTH_LEAVING 3 -+#define WLAN_MGMT_REASON_DISASSOC_INACTIVE 4 -+#define WLAN_MGMT_REASON_DISASSOC_AP_BUSY 5 -+#define WLAN_MGMT_REASON_CLASS2_NONAUTH 6 -+#define WLAN_MGMT_REASON_CLASS3_NONASSOC 7 -+#define WLAN_MGMT_REASON_DISASSOC_STA_HASLEFT 8 -+#define WLAN_MGMT_REASON_CANT_ASSOC_NONAUTH 9 -+ -+/*-- Status Codes -------------------------------*/ -+#define WLAN_MGMT_STATUS_SUCCESS 0 -+#define WLAN_MGMT_STATUS_UNSPEC_FAILURE 1 -+#define WLAN_MGMT_STATUS_CAPS_UNSUPPORTED 10 -+#define WLAN_MGMT_STATUS_REASSOC_NO_ASSOC 11 -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_UNSPEC 12 -+#define WLAN_MGMT_STATUS_UNSUPPORTED_AUTHALG 13 -+#define WLAN_MGMT_STATUS_RX_AUTH_NOSEQ 14 -+#define WLAN_MGMT_STATUS_CHALLENGE_FAIL 15 -+#define WLAN_MGMT_STATUS_AUTH_TIMEOUT 16 -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_BUSY 17 -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_RATES 18 -+/* p80211b additions */ -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOSHORT 19 -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOPBCC 20 -+#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOAGILITY 21 -+ -+/*-- Auth Algorithm Field ---------------------------*/ -+#define WLAN_AUTH_ALG_OPENSYSTEM 0 -+#define WLAN_AUTH_ALG_SHAREDKEY 1 -+ -+/*-- Management Frame Field Offsets -------------*/ -+/* Note: Not all fields are listed because of variable lengths */ -+/* Note: These offsets are from the start of the frame data */ -+ -+#define WLAN_BEACON_OFF_TS 0 -+#define WLAN_BEACON_OFF_BCN_INT 8 -+#define WLAN_BEACON_OFF_CAPINFO 10 -+#define WLAN_BEACON_OFF_SSID 12 -+ -+#define WLAN_DISASSOC_OFF_REASON 0 -+ -+#define WLAN_ASSOCREQ_OFF_CAP_INFO 0 -+#define WLAN_ASSOCREQ_OFF_LISTEN_INT 2 -+#define WLAN_ASSOCREQ_OFF_SSID 4 -+ -+#define WLAN_ASSOCRESP_OFF_CAP_INFO 0 -+#define WLAN_ASSOCRESP_OFF_STATUS 2 -+#define WLAN_ASSOCRESP_OFF_AID 4 -+#define WLAN_ASSOCRESP_OFF_SUPP_RATES 6 -+ -+#define WLAN_REASSOCREQ_OFF_CAP_INFO 0 -+#define WLAN_REASSOCREQ_OFF_LISTEN_INT 2 -+#define WLAN_REASSOCREQ_OFF_CURR_AP 4 -+#define WLAN_REASSOCREQ_OFF_SSID 10 -+ -+#define WLAN_REASSOCRESP_OFF_CAP_INFO 0 -+#define WLAN_REASSOCRESP_OFF_STATUS 2 -+#define WLAN_REASSOCRESP_OFF_AID 4 -+#define WLAN_REASSOCRESP_OFF_SUPP_RATES 6 -+ -+#define WLAN_PROBEREQ_OFF_SSID 0 -+ -+#define WLAN_PROBERESP_OFF_TS 0 -+#define WLAN_PROBERESP_OFF_BCN_INT 8 -+#define WLAN_PROBERESP_OFF_CAP_INFO 10 -+#define WLAN_PROBERESP_OFF_SSID 12 -+ -+#define WLAN_AUTHEN_OFF_AUTH_ALG 0 -+#define WLAN_AUTHEN_OFF_AUTH_SEQ 2 -+#define WLAN_AUTHEN_OFF_STATUS 4 -+#define WLAN_AUTHEN_OFF_CHALLENGE 6 -+ -+#define WLAN_DEAUTHEN_OFF_REASON 0 -+ -+enum { -+IEEE16(WF_MGMT_CAP_ESS, 0x0001) -+IEEE16(WF_MGMT_CAP_IBSS, 0x0002) -+/* In (re)assoc request frames by STA: -+** Pollable=0, PollReq=0: STA is not CF-Pollable -+** 0 1: STA is CF-Pollable, not requesting to be placed on the CF-Polling list -+** 1 0: STA is CF-Pollable, requesting to be placed on the CF-Polling list -+** 1 1: STA is CF-Pollable, requesting never to be polled -+** In beacon, proberesp, (re)assoc resp frames by AP: -+** 0 0: No point coordinator at AP -+** 0 1: Point coordinator at AP for delivery only (no polling) -+** 1 0: Point coordinator at AP for delivery and polling -+** 1 1: Reserved */ -+IEEE16(WF_MGMT_CAP_CFPOLLABLE, 0x0004) -+IEEE16(WF_MGMT_CAP_CFPOLLREQ, 0x0008) -+/* 1=non-WEP data frames are disallowed */ -+IEEE16(WF_MGMT_CAP_PRIVACY, 0x0010) -+/* In beacon, proberesp, (re)assocresp by AP/AdHoc: -+** 1=use of shortpre is allowed ("I can receive shortpre") */ -+IEEE16(WF_MGMT_CAP_SHORT, 0x0020) -+IEEE16(WF_MGMT_CAP_PBCC, 0x0040) -+IEEE16(WF_MGMT_CAP_AGILITY, 0x0080) -+/* In (re)assoc request frames by STA: -+** 1=short slot time implemented and enabled -+** NB: AP shall use long slot time beginning at the next Beacon after assoc -+** of STA with this bit set to 0 -+** In beacon, proberesp, (re)assoc resp frames by AP: -+** currently used slot time value: 0/1 - long/short */ -+IEEE16(WF_MGMT_CAP_SHORTSLOT, 0x0400) -+/* In (re)assoc request frames by STA: 1=CCK-OFDM is implemented and enabled -+** In beacon, proberesp, (re)assoc resp frames by AP/AdHoc: -+** 1=CCK-OFDM is allowed */ -+IEEE16(WF_MGMT_CAP_CCKOFDM, 0x2000) -+}; -+ -+ -+/*********************************************************************** -+** Types -+*/ -+ -+/* Information Element types */ -+ -+/* prototype structure, all IEs start with these members */ -+typedef struct wlan_ie { -+ u8 eid; -+ u8 len; -+} WLAN_PACKED wlan_ie_t; -+ -+/*-- Service Set Identity (SSID) -----------------*/ -+typedef struct wlan_ie_ssid { -+ u8 eid; -+ u8 len; -+ u8 ssid[1]; /* may be zero */ -+} WLAN_PACKED wlan_ie_ssid_t; -+ -+/*-- Supported Rates -----------------------------*/ -+typedef struct wlan_ie_supp_rates { -+ u8 eid; -+ u8 len; -+ u8 rates[1]; /* had better be at LEAST one! */ -+} WLAN_PACKED wlan_ie_supp_rates_t; -+ -+/*-- FH Parameter Set ----------------------------*/ -+typedef struct wlan_ie_fh_parms { -+ u8 eid; -+ u8 len; -+ u16 dwell; -+ u8 hopset; -+ u8 hoppattern; -+ u8 hopindex; -+} WLAN_PACKED wlan_ie_fh_parms_t; -+ -+/*-- DS Parameter Set ----------------------------*/ -+typedef struct wlan_ie_ds_parms { -+ u8 eid; -+ u8 len; -+ u8 curr_ch; -+} WLAN_PACKED wlan_ie_ds_parms_t; -+ -+/*-- CF Parameter Set ----------------------------*/ -+typedef struct wlan_ie_cf_parms { -+ u8 eid; -+ u8 len; -+ u8 cfp_cnt; -+ u8 cfp_period; -+ u16 cfp_maxdur; -+ u16 cfp_durremaining; -+} WLAN_PACKED wlan_ie_cf_parms_t; -+ -+/*-- TIM ------------------------------------------*/ -+typedef struct wlan_ie_tim { -+ u8 eid; -+ u8 len; -+ u8 dtim_cnt; -+ u8 dtim_period; -+ u8 bitmap_ctl; -+ u8 virt_bm[1]; -+} WLAN_PACKED wlan_ie_tim_t; -+ -+/*-- IBSS Parameter Set ---------------------------*/ -+typedef struct wlan_ie_ibss_parms { -+ u8 eid; -+ u8 len; -+ u16 atim_win; -+} WLAN_PACKED wlan_ie_ibss_parms_t; -+ -+/*-- Challenge Text ------------------------------*/ -+typedef struct wlan_ie_challenge { -+ u8 eid; -+ u8 len; -+ u8 challenge[1]; -+} WLAN_PACKED wlan_ie_challenge_t; -+ -+/*-- ERP (42) -------------------------------------*/ -+typedef struct wlan_ie_erp { -+ u8 eid; -+ u8 len; -+ /* bit 0:Non ERP present -+ ** 1:Use Protection -+ ** 2:Barker Preamble mode -+ ** 3-7:reserved */ -+ u8 erp; -+} WLAN_PACKED wlan_ie_erp_t; -+ -+/* Types for parsing mgmt frames */ -+ -+/* prototype structure, all mgmt frame types will start with these members */ -+typedef struct wlan_fr_mgmt { -+ u16 type; -+ u16 len; /* DOES NOT include FCS */ -+ wlan_hdr_t *hdr; -+ /* used for target specific data, skb in Linux */ -+ /*-- fixed fields -----------*/ -+ /*-- info elements ----------*/ -+} WLAN_PACKED wlan_fr_mgmt_t; -+ -+/*-- Beacon ---------------------------------------*/ -+typedef struct wlan_fr_beacon { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u64 *ts; -+ u16 *bcn_int; -+ u16 *cap_info; -+ /*-- info elements ----------*/ -+ wlan_ie_ssid_t *ssid; -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+ wlan_ie_fh_parms_t *fh_parms; -+ wlan_ie_ds_parms_t *ds_parms; -+ wlan_ie_cf_parms_t *cf_parms; -+ wlan_ie_ibss_parms_t *ibss_parms; -+ wlan_ie_tim_t *tim; /* in beacon only, not proberesp */ -+ wlan_ie_erp_t *erp; /* in beacon only, not proberesp */ -+} wlan_fr_beacon_t; -+#define wlan_fr_proberesp wlan_fr_beacon -+#define wlan_fr_proberesp_t wlan_fr_beacon_t -+ -+/*-- IBSS ATIM ------------------------------------*/ -+typedef struct wlan_fr_ibssatim { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ /*-- info elements ----------*/ -+ /* this frame type has a null body */ -+} wlan_fr_ibssatim_t; -+ -+/*-- Disassociation -------------------------------*/ -+typedef struct wlan_fr_disassoc { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *reason; -+ /*-- info elements ----------*/ -+} wlan_fr_disassoc_t; -+ -+/*-- Association Request --------------------------*/ -+typedef struct wlan_fr_assocreq { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *cap_info; -+ u16 *listen_int; -+ /*-- info elements ----------*/ -+ wlan_ie_ssid_t *ssid; -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+} wlan_fr_assocreq_t; -+ -+/*-- Association Response -------------------------*/ -+typedef struct wlan_fr_assocresp { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *cap_info; -+ u16 *status; -+ u16 *aid; -+ /*-- info elements ----------*/ -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+} wlan_fr_assocresp_t; -+ -+/*-- Reassociation Request ------------------------*/ -+typedef struct wlan_fr_reassocreq { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *cap_info; -+ u16 *listen_int; -+ u8 *curr_ap; -+ /*-- info elements ----------*/ -+ wlan_ie_ssid_t *ssid; -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+} wlan_fr_reassocreq_t; -+ -+/*-- Reassociation Response -----------------------*/ -+typedef struct wlan_fr_reassocresp { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *cap_info; -+ u16 *status; -+ u16 *aid; -+ /*-- info elements ----------*/ -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+} wlan_fr_reassocresp_t; -+ -+/*-- Probe Request --------------------------------*/ -+typedef struct wlan_fr_probereq { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ /*-- info elements ----------*/ -+ wlan_ie_ssid_t *ssid; -+ wlan_ie_supp_rates_t *supp_rates; -+ wlan_ie_supp_rates_t *ext_rates; -+} wlan_fr_probereq_t; -+ -+/*-- Authentication -------------------------------*/ -+typedef struct wlan_fr_authen { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *auth_alg; -+ u16 *auth_seq; -+ u16 *status; -+ /*-- info elements ----------*/ -+ wlan_ie_challenge_t *challenge; -+} wlan_fr_authen_t; -+ -+/*-- Deauthenication -----------------------------*/ -+typedef struct wlan_fr_deauthen { -+ u16 type; -+ u16 len; -+ wlan_hdr_t *hdr; -+ /*-- fixed fields -----------*/ -+ u16 *reason; -+ /*-- info elements ----------*/ -+} wlan_fr_deauthen_t; -+ -+/* Types for building mgmt frames */ -+ -+/* Warning. Several types used in below structs are -+** in fact variable length. Use structs with such fields with caution */ -+typedef struct auth_frame_body { -+ u16 auth_alg; -+ u16 auth_seq; -+ u16 status; -+ wlan_ie_challenge_t challenge; -+} WLAN_PACKED auth_frame_body_t; -+ -+typedef struct assocresp_frame_body { -+ u16 cap_info; -+ u16 status; -+ u16 aid; -+ wlan_ie_supp_rates_t rates; -+} WLAN_PACKED assocresp_frame_body_t; -+ -+typedef struct reassocreq_frame_body { -+ u16 cap_info; -+ u16 listen_int; -+ u8 current_ap[ETH_ALEN]; -+ wlan_ie_ssid_t ssid; -+/* access to this one is disabled since ssid_t is variable length: */ -+ /* wlan_ie_supp_rates_t rates; */ -+} WLAN_PACKED reassocreq_frame_body_t; -+ -+typedef struct reassocresp_frame_body { -+ u16 cap_info; -+ u16 status; -+ u16 aid; -+ wlan_ie_supp_rates_t rates; -+} WLAN_PACKED reassocresp_frame_body_t; -+ -+typedef struct deauthen_frame_body { -+ u16 reason; -+} WLAN_PACKED deauthen_frame_body_t; -+ -+typedef struct disassoc_frame_body { -+ u16 reason; -+} WLAN_PACKED disassoc_frame_body_t; -+ -+typedef struct probereq_frame_body { -+ wlan_ie_ssid_t ssid; -+ wlan_ie_supp_rates_t rates; -+} WLAN_PACKED probereq_frame_body_t; -+ -+typedef struct proberesp_frame_body { -+ u8 timestamp[8]; -+ u16 beacon_int; -+ u16 cap_info; -+ wlan_ie_ssid_t ssid; -+/* access to these is disabled since ssid_t is variable length: */ -+ /* wlan_ie_supp_rates_t rates; */ -+ /* fhps_t fhps; */ -+ /* dsps_t dsps; */ -+ /* cfps_t cfps; */ -+} WLAN_PACKED proberesp_frame_body_t; -+ -+ -+/*********************************************************************** -+** Functions -+*/ -+ -+/* Helpers for parsing mgmt frames */ -+void wlan_mgmt_decode_ibssatim(wlan_fr_ibssatim_t *f); -+void wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t *f); -+void wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t *f); -+void wlan_mgmt_decode_authen(wlan_fr_authen_t *f); -+void wlan_mgmt_decode_beacon(wlan_fr_beacon_t *f); -+void wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t *f); -+void wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t *f); -+void wlan_mgmt_decode_probereq(wlan_fr_probereq_t *f); -+void wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t *f); -+void wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t *f); -+void wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t *f); -+ -+/* Helpers for building mgmt frames */ -+static inline u8* -+wlan_fill_ie_ssid(u8 *p, int len, const char *ssid) -+{ -+ struct wlan_ie_ssid *ie = (void*)p; -+ ie->eid = WLAN_EID_SSID; -+ ie->len = len; -+ memcpy(ie->ssid, ssid, len); -+ return p + len + 2; -+} -+/* This controls whether we create 802.11g 'ext supported rates' IEs -+** or just create overlong 'supported rates' IEs instead -+** (non-11g compliant) */ -+#define WE_OBEY_802_11G 1 -+static inline u8* -+wlan_fill_ie_rates(u8 *p, int len, const u8 *rates) -+{ -+ struct wlan_ie_supp_rates *ie = (void*)p; -+#if WE_OBEY_802_11G -+ if (len > 8 ) len = 8; -+#endif -+ /* supported rates (1 to 8 octets) */ -+ ie->eid = WLAN_EID_SUPP_RATES; -+ ie->len = len; -+ memcpy(ie->rates, rates, len); -+ return p + len + 2; -+} -+/* This one wouldn't create an IE at all if not needed */ -+static inline u8* -+wlan_fill_ie_rates_ext(u8 *p, int len, const u8 *rates) -+{ -+ struct wlan_ie_supp_rates *ie = (void*)p; -+#if !WE_OBEY_802_11G -+ return p; -+#endif -+ len -= 8; -+ if (len <= 0) return p; -+ /* ext supported rates */ -+ ie->eid = WLAN_EID_EXT_RATES; -+ ie->len = len; -+ memcpy(ie->rates, rates+8, len); -+ return p + len + 2; -+} -+static inline u8* -+wlan_fill_ie_ds_parms(u8 *p, int channel) -+{ -+ struct wlan_ie_ds_parms *ie = (void*)p; -+ ie->eid = WLAN_EID_DS_PARMS; -+ ie->len = 1; -+ ie->curr_ch = channel; -+ return p + sizeof(*ie); -+} -+static inline u8* -+wlan_fill_ie_ibss_parms(u8 *p, int atim_win) -+{ -+ struct wlan_ie_ibss_parms *ie = (void*)p; -+ ie->eid = WLAN_EID_IBSS_PARMS; -+ ie->len = 2; -+ ie->atim_win = atim_win; -+ return p + sizeof(*ie); -+} -+static inline u8* -+wlan_fill_ie_tim(u8 *p, int rem, int period, int bcast, -+ int ofs, int len, const u8 *vbm) -+{ -+ struct wlan_ie_tim *ie = (void*)p; -+ ie->eid = WLAN_EID_TIM; -+ ie->len = len + 3; -+ ie->dtim_cnt = rem; -+ ie->dtim_period = period; -+ ie->bitmap_ctl = ofs | (bcast!=0); -+ if (vbm) -+ memcpy(ie->virt_bm, vbm, len); /* min 1 byte */ -+ else -+ ie->virt_bm[0] = 0; -+ return p + len + 3 + 2; -+} -Index: linux-2.6.23/drivers/net/wireless/Kconfig -=================================================================== ---- linux-2.6.23.orig/drivers/net/wireless/Kconfig 2008-01-20 21:13:17.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/Kconfig 2008-01-20 21:15:12.000000000 +0000 -@@ -5,6 +5,36 @@ - menu "Wireless LAN" - depends on !S390 - -+config NET_RADIO -+ bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions" -+ select WIRELESS_EXT -+ ---help--- -+ Support for wireless LANs and everything having to do with radio, -+ but not with amateur radio or FM broadcasting. -+ -+ Saying Y here also enables the Wireless Extensions (creates -+ /proc/net/wireless and enables iwconfig access). The Wireless -+ Extension is a generic API allowing a driver to expose to the user -+ space configuration and statistics specific to common Wireless LANs. -+ The beauty of it is that a single set of tool can support all the -+ variations of Wireless LANs, regardless of their type (as long as -+ the driver supports Wireless Extension). Another advantage is that -+ these parameters may be changed on the fly without restarting the -+ driver (or Linux). If you wish to use Wireless Extensions with -+ wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch -+ the tools from -+ . -+ -+config NET_WIRELESS_RTNETLINK -+ bool "Wireless Extension API over RtNetlink" -+ depends on NET_RADIO -+ ---help--- -+ Support the Wireless Extension API over the RtNetlink socket -+ in addition to the traditional ioctl interface (selected above). -+ -+ For now, few tools use this facility, but it might grow in the -+ future. The only downside is that it adds 4.5 kB to your kernel. -+ - config WLAN_PRE80211 - bool "Wireless LAN (pre-802.11)" - depends on NETDEVICES -@@ -650,6 +680,7 @@ config P54_PCI - - source "drivers/net/wireless/iwlwifi/Kconfig" - source "drivers/net/wireless/hostap/Kconfig" -+source "drivers/net/wireless/acx/Kconfig" - source "drivers/net/wireless/bcm43xx/Kconfig" - source "drivers/net/wireless/b43/Kconfig" - source "drivers/net/wireless/b43legacy/Kconfig" -Index: linux-2.6.23/drivers/net/wireless/Makefile -=================================================================== ---- linux-2.6.23.orig/drivers/net/wireless/Makefile 2008-01-20 21:13:17.000000000 +0000 -+++ linux-2.6.23/drivers/net/wireless/Makefile 2008-01-20 21:13:40.000000000 +0000 -@@ -34,6 +34,8 @@ obj-$(CONFIG_PCMCIA_ATMEL) += atmel - - obj-$(CONFIG_PRISM54) += prism54/ - -+obj-$(CONFIG_ACX) += acx/ -+ - obj-$(CONFIG_HOSTAP) += hostap/ - obj-$(CONFIG_BCM43XX) += bcm43xx/ - obj-$(CONFIG_B43) += b43/ diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/htcuni.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/htcuni.patch deleted file mode 100644 index f462650566..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/htcuni.patch +++ /dev/null @@ -1,7928 +0,0 @@ ---- - arch/arm/Kconfig | 2 - arch/arm/mach-pxa/Kconfig | 89 + - arch/arm/mach-pxa/Makefile | 1 - arch/arm/mach-pxa/generic.c | 13 - arch/arm/mach-pxa/htcuniversal/Makefile | 19 - arch/arm/mach-pxa/htcuniversal/htcuniversal.c | 468 +++++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c | 917 +++++++++++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h | 65 - arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c | 143 + - arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c | 61 - arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c | 135 + - arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h | 17 - arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c | 87 + - arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c | 226 ++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c | 212 ++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c | 167 ++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h | 16 - arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c | 69 - arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c | 97 + - arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c | 490 ++++++ - arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c | 71 - arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h | 20 - drivers/input/keyboard/Kconfig | 7 - drivers/input/keyboard/Makefile | 1 - drivers/input/keyboard/asic3_keys.c | 131 + - drivers/leds/Kconfig | 7 - drivers/leds/Makefile | 1 - drivers/leds/leds-asic3.c | 189 ++ - drivers/mfd/Kconfig | 10 - drivers/mfd/Makefile | 2 - drivers/mfd/asic3_base.c | 1208 +++++++++++++++ - drivers/mfd/soc-core.c | 106 + - drivers/mfd/soc-core.h | 30 - drivers/mmc/host/Kconfig | 6 - drivers/mmc/host/Makefile | 1 - drivers/mmc/host/asic3_mmc.c | 900 +++++++++++ - drivers/mmc/host/asic3_mmc.h | 25 - drivers/serial/pxa.c | 22 - include/asm-arm/arch-pxa/clock.h | 27 - include/asm-arm/arch-pxa/htcuniversal-asic.h | 213 ++ - include/asm-arm/arch-pxa/htcuniversal-gpio.h | 220 ++ - include/asm-arm/arch-pxa/htcuniversal-init.h | 14 - include/asm-arm/arch-pxa/htcuniversal.h | 3 - include/asm-arm/arch-pxa/irqs.h | 2 - include/asm-arm/arch-pxa/pxa-pm_ll.h | 6 - include/asm-arm/arch-pxa/pxa-regs.h | 2 - include/asm-arm/arch-pxa/serial.h | 78 - include/asm-arm/hardware/asic3_keys.h | 18 - include/asm-arm/hardware/asic3_leds.h | 34 - include/asm-arm/hardware/ipaq-asic3.h | 602 +++++++ - include/linux/backlight.h | 7 - include/linux/gpiodev.h | 44 - include/linux/input_pda.h | 47 - include/linux/ioport.h | 1 - include/linux/soc/asic3_base.h | 104 + - include/linux/soc/tmio_mmc.h | 17 - 56 files changed, 7469 insertions(+), 1 deletion(-) - -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/Makefile 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,19 @@ -+# -+# Makefile for HTC Universal -+# -+ -+snd-htcuniversal-ak4641-objs := htcuniversal_ak4641.o -+ -+obj-$(CONFIG_MACH_HTCUNIVERSAL) += htcuniversal.o -+obj-$(CONFIG_HTCUNIVERSAL_CORE) += htcuniversal_core.o -+obj-$(CONFIG_HTCUNIVERSAL_POWER) += htcuniversal_power2.o -+obj-$(CONFIG_HTCUNIVERSAL_LCD) += htcuniversal_lcd.o -+obj-$(CONFIG_HTCUNIVERSAL_BACKLIGHT) += htcuniversal_bl.o -+obj-$(CONFIG_HTCUNIVERSAL_TS2) += htcuniversal_ts2.o -+obj-$(CONFIG_HTCUNIVERSAL_BUTTONS) += htcuniversal_buttons.o -+obj-$(CONFIG_HTCUNIVERSAL_BLUETOOTH) += htcuniversal_bt.o -+obj-$(CONFIG_HTCUNIVERSAL_PHONE) += htcuniversal_phone.o -+obj-$(CONFIG_HTCUNIVERSAL_ASIC3_LEDS) += htcuniversal_asic3_leds.o -+obj-$(CONFIG_HTCUNIVERSAL_UDC) += htcuniversal_udc.o -+ -+obj-$(CONFIG_HTCUNIVERSAL_AK4641) += htcuniversal_ak4641.o -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,468 @@ -+/* -+ * Hardware definitions for HTC Universal -+ * -+ * Copyright (c) 2006 Oleg Gusev -+ * -+ * Use consistent with the GNU GPL is permitted, -+ * provided that this copyright notice is -+ * preserved in its entirety in all copies and derived works. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include "../generic.h" -+ -+#include "htcuniversal_bt.h" -+#include "htcuniversal_phone.h" -+#include "tsc2046_ts.h" -+ -+/* -+ * IRDA -+ */ -+ -+static void htcuniversal_irda_transceiver_mode(struct device *dev, int mode) -+{ -+ /* */ -+} -+ -+static struct pxaficp_platform_data htcuniversal_ficp_platform_data = { -+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE, -+ .transceiver_mode = htcuniversal_irda_transceiver_mode, -+}; -+ -+/* -+ * Bluetooth - Relies on other loadable modules, like ASIC3 and Core, -+ * so make the calls indirectly through pointers. Requires that the -+ * htcuniversal_bt module be loaded before any attempt to use -+ * bluetooth (obviously). -+ */ -+ -+static struct htcuniversal_bt_funcs bt_funcs; -+ -+static void -+htcuniversal_bt_configure( int state ) -+{ -+ if (bt_funcs.configure != NULL) -+ bt_funcs.configure( state ); -+} -+ -+static struct htcuniversal_phone_funcs phone_funcs; -+ -+static void -+htcuniversal_phone_configure( int state ) -+{ -+ if (phone_funcs.configure != NULL) -+ phone_funcs.configure( state ); -+} -+ -+//void htcuniversal_ll_pm_init(void); -+ -+extern struct platform_device htcuniversal_bl; -+static struct platform_device htcuniversal_lcd = { .name = "htcuniversal_lcd", }; -+//static struct platform_device htcuniversal_kbd = { .name = "htcuniversal_kbd", }; -+static struct platform_device htcuniversal_buttons = { .name = "htcuniversal_buttons", }; -+//static struct platform_device htcuniversal_ts = { .name = "htcuniversal_ts", }; -+//static struct platform_device htcuniversal_bt = { .name = "htcuniversal_bt", }; -+//static struct platform_device htcuniversal_phone = { .name = "htcuniversal_phone", }; -+static struct platform_device htcuniversal_power = { .name = "htcuniversal_power", }; -+static struct platform_device htcuniversal_udc = { .name = "htcuniversal_udc", }; -+ -+static struct tsc2046_mach_info htcuniversal_ts_platform_data = { -+ .port = 1, -+ .clock = CKEN_SSP1, -+ .pwrbit_X = 1, -+ .pwrbit_Y = 1, -+ .irq = 0 /* asic3 irq */ -+}; -+ -+static struct platform_device htcuniversal_ts = { -+ .name = "htcuniversal_ts", -+ .dev = { -+ .platform_data = &htcuniversal_ts_platform_data, -+ }, -+}; -+ -+ -+/* Bluetooth */ -+ -+static struct platform_device htcuniversal_bt = { -+ .name = "htcuniversal_bt", -+ .id = -1, -+ .dev = { -+ .platform_data = &bt_funcs, -+ }, -+}; -+ -+static struct platform_device htcuniversal_phone = { -+ .name = "htcuniversal_phone", -+ .id = -1, -+ .dev = { -+ .platform_data = &phone_funcs, -+ }, -+}; -+ -+/* PXA2xx Keys */ -+ -+static struct gpio_keys_button htcuniversal_button_table[] = { -+ { KEY_POWER, GPIO_NR_HTCUNIVERSAL_KEY_ON_N, 1 }, -+}; -+ -+static struct gpio_keys_platform_data htcuniversal_pxa_keys_data = { -+ .buttons = htcuniversal_button_table, -+ .nbuttons = ARRAY_SIZE(htcuniversal_button_table), -+}; -+ -+static struct platform_device htcuniversal_pxa_keys = { -+ .name = "gpio-keys", -+ .dev = { -+ .platform_data = &htcuniversal_pxa_keys_data, -+ }, -+ .id = -1, -+}; -+ -+/**************************************************************** -+ * Keyboard -+ ****************************************************************/ -+ -+static struct pxa27x_keyboard_platform_data htcuniversal_kbd = { -+ .nr_rows = 8, -+ .nr_cols = 8, -+ .keycodes = { -+ { -+ /* row 0 */ -+ KEY_ENTER, -+ KEY_MINUS, -+ KEY_ESC, -+ KEY_1, -+ KEY_TAB, -+ KEY_CAPSLOCK, -+ KEY_LEFTSHIFT, -+ KEY_RIGHTALT, /* Fn */ -+ }, { /* row 1 */ -+ KEY_COMMA, -+ KEY_EQUAL, -+ KEY_F1, -+ KEY_2, -+ KEY_Q, -+ KEY_A, -+ KEY_Z, -+ KEY_LEFTCTRL, -+ }, { /* row 2 */ -+ KEY_UP, -+ KEY_I, -+ KEY_F2, -+ KEY_3, -+ KEY_W, -+ KEY_S, -+ KEY_X, -+ KEY_F6, -+ }, { /* row 3 */ -+ KEY_DOT, -+ KEY_O, -+ KEY_F3, -+ KEY_4, -+ KEY_E, -+ KEY_D, -+ KEY_C, -+ KEY_LEFTALT, -+ }, { /* row 4 */ -+ KEY_F9, -+ KEY_P, -+ KEY_F4, -+ KEY_5, -+ KEY_R, -+ KEY_F, -+ KEY_V, -+ KEY_SPACE, -+ }, { /* row 5 */ -+ KEY_RIGHT, -+ KEY_BACKSPACE, -+ KEY_F5, -+ KEY_6, -+ KEY_T, -+ KEY_G, -+ KEY_B, -+ KEY_F7, -+ }, { /* row 6 */ -+ KEY_F9, -+ KEY_K, -+ KEY_9, -+ KEY_7, -+ KEY_Y, -+ KEY_H, -+ KEY_N, -+ KEY_LEFT, -+ }, { /* row 7 */ -+ KEY_F10, -+ KEY_L, -+ KEY_0, -+ KEY_8, -+ KEY_U, -+ KEY_J, -+ KEY_M, -+ KEY_DOWN, -+ }, -+ }, -+ .gpio_modes = { -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN0_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN1_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN2_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN3_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN4_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN5_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN6_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKIN7_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT0_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT1_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT2_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT3_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT4_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT5_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT6_MD, -+ GPIO_NR_HTCUNIVERSAL_KP_MKOUT7_MD, -+ }, -+}; -+ -+static struct platform_device htcuniversal_pxa_keyboard = { -+ .name = "pxa27x-keyboard", -+ .id = -1, -+ .dev = { -+ .platform_data = &htcuniversal_kbd, -+ }, -+}; -+/* Core Hardware Functions */ -+ -+struct platform_device htcuniversal_core = { -+ .name = "htcuniversal_core", -+ .id = 0, -+ .dev = { -+ .platform_data = NULL, -+ }, -+}; -+ -+static struct platform_device *devices[] __initdata = { -+ &htcuniversal_core, -+// &htcuniversal_flash, -+ &htcuniversal_pxa_keyboard, -+ &htcuniversal_pxa_keys, -+}; -+ -+static struct platform_device *htcuniversal_asic3_devices[] __initdata = { -+ &htcuniversal_lcd, -+#ifdef CONFIG_HTCUNIVERSAL_BACKLIGHT -+ &htcuniversal_bl, -+#endif -+ &htcuniversal_buttons, -+ &htcuniversal_ts, -+ &htcuniversal_bt, -+ &htcuniversal_phone, -+ &htcuniversal_power, -+ &htcuniversal_udc, -+}; -+ -+static struct asic3_platform_data htcuniversal_asic3_platform_data = { -+ -+ /* Setting ASIC3 GPIO registers to the below initialization states -+ * HTC Universal asic3 information: -+ * http://wiki.xda-developers.com/index.php?pagename=UniversalASIC3 -+ * http://wiki.xda-developers.com/index.php?pagename=ASIC3 -+ * -+ * dir: Direction of the GPIO pin. 0: input, 1: output. -+ * If unknown, set as output to avoid power consuming floating input nodes -+ * init: Initial state of the GPIO bits -+ * -+ * These registers are configured as they are on Wince. -+ */ -+ .gpio_a = { -+ .dir = (1<> 18) & 0xfffc, -+ .boot_params = 0xa0000100, -+ .map_io = htcuniversal_map_io, -+ .init_irq = htcuniversal_init_irq, -+ .init_machine = htcuniversal_init, -+ .timer = &pxa_timer, -+MACHINE_END -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,917 @@ -+/* -+ * Audio support for codec Asahi Kasei AK4641 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Copyright (c) 2006 Giorgio Padrin -+ * -+ * History: -+ * -+ * 2006-03 Written -- Giorgio Padrin -+ * 2006-09 Test and debug on machine (HP hx4700) -- Elshin Roman -+ * -+ * AK4641 codec device driver -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * Based on code: -+ * Copyright (c) 2002 Hewlett-Packard Company -+ * Copyright (c) 2000 Nicolas Pitre -+ * Copyright (c) 2000 Lernout & Hauspie Speech Products, N.V. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License. -+ */ -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "htcuniversal_ak4641.h" -+ -+/* Registers */ -+#define R_PM1 0x00 -+#define R_PM2 0x01 -+#define R_SEL1 0x02 -+#define R_SEL2 0x03 -+#define R_MODE1 0x04 -+#define R_MODE2 0x05 -+#define R_DAC 0x06 -+#define R_MIC 0x07 -+#define REG_TIMER 0x08 -+#define REG_ALC1 0x09 -+#define REG_ALC2 0x0a -+#define R_PGA 0x0b -+#define R_ATTL 0x0c -+#define R_ATTR 0x0d -+#define REG_VOL 0x0e -+#define R_STATUS 0x0f -+#define REG_EQLO 0x10 -+#define REG_EQMID 0x11 -+#define REG_EQHI 0x12 -+#define REG_BTIF 0x13 -+ -+/* Register flags */ -+/* REG_PWR1 */ -+#define R_PM1_PMADC 0x01 -+#define R_PM1_PMMIC 0x02 -+#define REG_PWR1_PMAUX 0x04 -+#define REG_PWR1_PMMO 0x08 -+#define R_PM1_PMLO 0x10 -+/* unused 0x20 */ -+/* unused 0x40 */ -+#define R_PM1_PMVCM 0x80 -+ -+/* REG_PWR2 */ -+#define R_PM2_PMDAC 0x01 -+/* unused 0x02 */ -+/* unused 0x04 */ -+#define R_PM2_PMMO2 0x08 -+#define REG_PWR2_MCKAC 0x10 -+/* unused 0x20 */ -+/* unused 0x40 */ -+#define R_PM2_MCKPD 0x80 -+ -+/* REG_SEL1 */ -+#define R_SEL1_PSMO2 0x01 -+/* unused 0x02 */ -+/* unused 0x04 */ -+/* unused 0x08 */ -+#define REG_SEL1_MICM 0x10 -+#define REG_SEL1_DACM 0x20 -+#define REG_SEL1_PSMO 0x40 -+#define REG_SEL1_MOGN 0x80 -+ -+/* REG_SEL2 */ -+#define R_SEL2_PSLOR 0x01 -+#define R_SEL2_PSLOL 0x02 -+#define REG_SEL2_AUXSI 0x04 -+/* unused 0x08 */ -+#define REG_SEL2_MICL 0x10 -+#define REG_SEL2_AUXL 0x20 -+/* unused 0x40 */ -+#define R_SEL2_DACL 0x80 -+ -+/* REG_MODE1 */ -+#define REG_MODE1_DIF0 0x01 -+#define REG_MODE1_DIF1 0x02 -+/* unused 0x04 */ -+/* unused 0x08 */ -+/* unused 0x10 */ -+/* unused 0x20 */ -+/* unused 0x40 */ -+/* unused 0x80 */ -+ -+/* REG_MODE2 */ -+/* unused 0x01 */ -+#define REG_MODE2_LOOP 0x02 -+#define REG_MODE2_HPM 0x04 -+/* unused 0x08 */ -+/* unused 0x10 */ -+#define REG_MODE2_MCK0 0x20 -+#define REG_MODE2_MCK1 0x40 -+/* unused 0x80 */ -+ -+/* REG_DAC */ -+#define REG_DAC_DEM0 0x01 -+#define REG_DAC_DEM1 0x02 -+#define REG_DAC_EQ 0x04 -+/* unused 0x08 */ -+#define R_DAC_DATTC 0x10 -+#define R_DAC_SMUTE 0x20 -+#define REG_DAC_TM 0x40 -+/* unused 0x80 */ -+ -+/* REG_MIC */ -+#define R_MIC_MGAIN 0x01 -+#define R_MIC_MSEL 0x02 -+#define R_MIC_MICAD 0x04 -+#define R_MIC_MPWRI 0x08 -+#define R_MIC_MPWRE 0x10 -+#define REG_MIC_AUXAD 0x20 -+/* unused 0x40 */ -+/* unused 0x80 */ -+ -+/* REG_TIMER */ -+ -+#define REG_TIMER_LTM0 0x01 -+#define REG_TIMER_LTM1 0x02 -+#define REG_TIMER_WTM0 0x04 -+#define REG_TIMER_WTM1 0x08 -+#define REG_TIMER_ZTM0 0x10 -+#define REG_TIMER_ZTM1 0x20 -+/* unused 0x40 */ -+/* unused 0x80 */ -+ -+#define REG_ALC1_LMTH 0x01 -+#define REG_ALC1_RATT 0x02 -+#define REG_ALC1_LMAT0 0x04 -+#define REG_ALC1_LMAT1 0x08 -+#define REG_ALC1_ZELM 0x10 -+#define REG_ALC1_ALC1 0x20 -+/* unused 0x40 */ -+/* unused 0x80 */ -+ -+/* REG_ALC2 */ -+ -+/* REG_PGA */ -+ -+/* REG_ATTL */ -+ -+/* REG_ATTR */ -+ -+/* REG_VOL */ -+#define REG_VOL_ATTM 0x80 -+ -+/* REG_STATUS */ -+#define R_STATUS_DTMIC 0x01 -+ -+/* REG_EQ controls use 4 bits for each of 5 EQ levels */ -+ -+/* Bluetooth not yet implemented */ -+#define REG_BTIF_PMAD2 0x01 -+#define REG_BTIF_PMDA2 0x02 -+#define REG_BTIF_PMBIF 0x04 -+#define REG_BTIF_ADC2 0x08 -+#define REG_BTIF_DAC2 0x10 -+#define REG_BTIF_BTFMT0 0x20 -+#define REG_BTIF_BTFMT1 0x40 -+/* unused 0x80 */ -+ -+/* begin {{ I2C }} */ -+ -+static struct i2c_driver snd_ak4641_i2c_driver = { -+ .driver = { -+ .name = "ak4641-i2c" -+ }, -+}; -+ -+static int snd_ak4641_i2c_init(void) -+{ -+ return i2c_add_driver(&snd_ak4641_i2c_driver); -+} -+ -+static void snd_ak4641_i2c_free(void) -+{ -+ i2c_del_driver(&snd_ak4641_i2c_driver); -+} -+ -+static inline int snd_ak4641_i2c_probe(struct snd_ak4641 *ak) -+{ -+ if (ak->i2c_client.adapter == NULL) return -EINVAL; -+ ak->i2c_client.addr = 0x12; -+ if (i2c_smbus_xfer(ak->i2c_client.adapter, ak->i2c_client.addr, -+ 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0) -+ return -ENODEV; -+ else return 0; -+} -+ -+static int snd_ak4641_i2c_attach(struct snd_ak4641 *ak) -+{ -+ int ret = 0; -+ if ((ret = snd_ak4641_i2c_probe(ak)) < 0) return ret; -+ snprintf(ak->i2c_client.name, sizeof(ak->i2c_client.name), -+ "ak4641-i2c at %d-%04x", -+ i2c_adapter_id(ak->i2c_client.adapter), ak->i2c_client.addr); -+ return i2c_attach_client(&ak->i2c_client); -+} -+ -+static void snd_ak4641_i2c_detach(struct snd_ak4641 *ak) -+{ -+ i2c_detach_client(&ak->i2c_client); -+} -+ -+/* end {{ I2C }} */ -+ -+ -+/* begin {{ Registers & Cache Ops }} */ -+ -+static int snd_ak4641_hwsync(struct snd_ak4641 *ak, int read, u8 reg) -+{ -+ struct i2c_msg msgs[2]; -+ u8 buf[2]; -+ int ret; -+ -+ snd_assert(reg < ARRAY_SIZE(ak->regs), return -EINVAL); -+ -+ /* setup i2c msgs */ -+ msgs[0].addr = ak->i2c_client.addr; -+ msgs[0].flags = 0; -+ msgs[0].buf = buf; -+ if (!read) -+ msgs[0].len = 2; -+ else { -+ msgs[1].flags = I2C_M_RD; -+ msgs[1].addr = msgs[0].addr; -+ msgs[1].buf = msgs[0].buf + 1; -+ msgs[0].len = 1; -+ msgs[1].len = 1; -+ } -+ -+ buf[0] = reg; -+ -+ /* regs[reg] -> buffer, on write */ -+ if (!read) buf[1] = ak->regs[reg]; -+ -+ /* i2c transfer */ -+ ret = i2c_transfer(ak->i2c_client.adapter, msgs, read ? 2 : 1); -+ if (ret != (read ? 2 : 1)) return ret; /* transfer error */ //@@ error ret < 0, or not ? -+ -+ /* regs[reg] <- buffer, on read */ -+ if (read) ak->regs[reg] = buf[1]; -+ -+ return 0; -+} -+ -+static inline int snd_ak4641_hwsync_read(struct snd_ak4641 *ak, u8 reg) -+{ -+ return snd_ak4641_hwsync(ak, 1, reg); -+} -+ -+static inline int snd_ak4641_hwsync_write(struct snd_ak4641 *ak, u8 reg) -+{ -+ return snd_ak4641_hwsync(ak, 0, reg); -+} -+ -+static int snd_ak4641_hwsync_read_all(struct snd_ak4641 *ak) -+{ -+ u8 reg; -+ for (reg = 0; reg < ARRAY_SIZE(ak->regs); reg++) -+ if (snd_ak4641_hwsync_read(ak, reg) < 0) return -1; -+ return 0; -+} -+ -+static int snd_ak4641_hwsync_write_all(struct snd_ak4641 *ak) -+{ -+ u8 reg; -+ for (reg = 0; reg < ARRAY_SIZE(ak->regs); reg++) -+ if (snd_ak4641_hwsync_write(ak, reg) < 0) return -1; -+ return 0; -+} -+ -+static int snd_ak4641_reg_changed(struct snd_ak4641 *ak, u8 reg) -+{ -+ if ((reg != R_PGA && ak->powered_on) || -+ (reg == R_PGA && (ak->regs[R_PM1] & R_PM1_PMMIC))) -+ return snd_ak4641_hwsync_write(ak, reg); -+ return 0; -+} -+ -+/* end {{ Registers & Cache Ops }}*/ -+ -+ -+static inline void snd_ak4641_lock(struct snd_ak4641 *ak) -+{ -+ down(&ak->sem); -+} -+ -+static inline void snd_ak4641_unlock(struct snd_ak4641 *ak) -+{ -+ up(&ak->sem); -+} -+ -+#define WRITE_MASK(i, val, mask) (((i) & ~(mask)) | ((val) & (mask))) -+ -+ -+/* begin {{ Controls }} */ -+ -+#define INV_RANGE(val, mask) \ -+ (~(val) & (mask)) -+ -+/*-begin----------------------------------------------------------*/ -+static int snd_ak4641_actl_playback_volume_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; -+ uinfo->count = 2; -+ uinfo->value.integer.min = 0; -+ uinfo->value.integer.max = 0xff; -+ return 0; -+} -+ -+static int snd_ak4641_actl_playback_volume_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ -+ snd_ak4641_lock(ak); -+ ucontrol->value.integer.value[0] = INV_RANGE(ak->regs[R_ATTL], 0xff); -+ ucontrol->value.integer.value[1] = INV_RANGE(ak->regs[R_ATTR], 0xff); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+static int snd_ak4641_actl_playback_volume_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ -+ snd_ak4641_lock(ak); -+ ak->regs[R_ATTL] = INV_RANGE(ucontrol->value.integer.value[0], 0xff); -+ ak->regs[R_ATTR] = INV_RANGE(ucontrol->value.integer.value[1], 0xff); -+ snd_ak4641_reg_changed(ak, R_ATTL); -+ snd_ak4641_reg_changed(ak, R_ATTR); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+/*-end------------------------------------------------------------*/ -+ -+/*-begin----------------------------------------------------------*/ -+static int snd_ak4641_actl_mic_gain_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; -+ uinfo->count = 1; -+ uinfo->value.integer.min = 0; -+ uinfo->value.integer.max = 0x7f; -+ return 0; -+} -+ -+static int snd_ak4641_actl_mic_gain_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ -+ ucontrol->value.integer.value[0] = ak->regs[R_PGA]; -+ return 0; -+} -+ -+static int snd_ak4641_actl_mic_gain_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ -+ snd_ak4641_lock(ak); -+ ak->regs[R_PGA] = ucontrol->value.integer.value[0]; -+ snd_ak4641_reg_changed(ak, R_PGA); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+/*-end------------------------------------------------------------*/ -+ -+#define ACTL(ctl_name, _name) \ -+static struct snd_kcontrol_new snd_ak4641_actl_ ## ctl_name = \ -+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = _name, \ -+ .info = snd_ak4641_actl_ ## ctl_name ## _info, \ -+ .get = snd_ak4641_actl_ ## ctl_name ## _get, .put = snd_ak4641_actl_ ## ctl_name ## _put }; -+ -+ACTL(playback_volume, "Master Playback Volume") -+ACTL(mic_gain, "Mic Capture Gain") -+ -+struct snd_ak4641_uctl_bool { -+ int (*get) (struct snd_ak4641 *uda); -+ int (*set) (struct snd_ak4641 *uda, int on); -+}; -+ -+static int snd_ak4641_actl_bool_info(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_info *uinfo) -+{ -+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; -+ uinfo->count = 1; -+ return 0; -+} -+ -+static int snd_ak4641_actl_bool_get(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ struct snd_ak4641_uctl_bool *uctl = -+ (struct snd_ak4641_uctl_bool *) kcontrol->private_value; -+ -+ ucontrol->value.integer.value[0] = uctl->get(ak); -+ return 0; -+} -+ -+static int snd_ak4641_actl_bool_put(struct snd_kcontrol *kcontrol, -+ struct snd_ctl_elem_value *ucontrol) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; -+ struct snd_ak4641_uctl_bool *uctl = -+ (struct snd_ak4641_uctl_bool *) kcontrol->private_value; -+ -+ return uctl->set(ak, ucontrol->value.integer.value[0]); -+} -+ -+/*-begin----------------------------------------------------------*/ -+static int snd_ak4641_uctl_playback_switch_get(struct snd_ak4641 *ak) -+{ -+ return (ak->regs[R_DAC] & R_DAC_SMUTE) == 0x00; -+} -+ -+static int snd_ak4641_uctl_playback_switch_set(struct snd_ak4641 *ak, int on) -+{ -+ snd_ak4641_lock(ak); -+ ak->regs[R_DAC] = WRITE_MASK(ak->regs[R_DAC], -+ on ? 0x00 : R_DAC_SMUTE, R_DAC_SMUTE); -+ snd_ak4641_reg_changed(ak, R_DAC); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+/*-end------------------------------------------------------------*/ -+ -+/*-begin----------------------------------------------------------*/ -+static int snd_ak4641_uctl_mic_boost_get(struct snd_ak4641 *ak) -+{ -+ return (ak->regs[R_MIC] & R_MIC_MGAIN) == R_MIC_MGAIN; -+} -+ -+static int snd_ak4641_uctl_mic_boost_set(struct snd_ak4641 *ak, int on) -+{ -+ snd_ak4641_lock(ak); -+ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], -+ on ? R_MIC_MGAIN : 0x00, R_MIC_MGAIN); -+ snd_ak4641_reg_changed(ak, R_MIC); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+/*-end------------------------------------------------------------*/ -+ -+/*-begin----------------------------------------------------------*/ -+static int snd_ak4641_uctl_mono_out_get(struct snd_ak4641 *ak) -+{ -+ printk("mono_out status 0x%8.8x -> 0x%8.8x\n",ak->regs[R_SEL1], ak->regs[R_SEL1] & REG_SEL1_PSMO); -+ return (ak->regs[R_SEL1] & REG_SEL1_PSMO) == REG_SEL1_PSMO; -+} -+ -+static int snd_ak4641_uctl_mono_out_set(struct snd_ak4641 *ak, int on) -+{ -+ printk("phone mic enable called. on=%d\n",on); -+ snd_ak4641_lock(ak); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], on ? R_PM1_PMMIC : 0x00, R_PM1_PMMIC); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], on ? REG_PWR1_PMMO : 0x00, REG_PWR1_PMMO); -+ snd_ak4641_reg_changed(ak, R_PM1); -+ -+ snd_ak4641_hwsync_write(ak, R_PGA); /* mic PGA gain is reset when PMMIC = 0 */ -+ -+ /* internal mic */ -+ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], on ? R_MIC_MPWRI : 0x0, R_MIC_MPWRI); -+ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], 0x0, R_MIC_MSEL); -+ snd_ak4641_hwsync_write(ak, R_MIC); -+ -+// ak->regs[REG_BTIF] = WRITE_MASK(ak->regs[REG_BTIF], 0x0, REG_BTIF_DAC2); -+// snd_ak4641_hwsync_write(ak, REG_BTIF); -+ /* */ -+// ak->regs[REG_VOL] = WRITE_MASK(ak->regs[REG_VOL], on ? REG_VOL_ATTM : 0x00, REG_VOL_ATTM); -+// ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_MOGN : 0x00, REG_SEL1_MOGN); -+ ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_MICM : 0x00, REG_SEL1_MICM); -+ ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_PSMO : 0x00, REG_SEL1_PSMO); -+ snd_ak4641_reg_changed(ak, R_SEL1); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+/*-end------------------------------------------------------------*/ -+ -+#define ACTL_BOOL(ctl_name, _name) \ -+static struct snd_ak4641_uctl_bool snd_ak4641_actl_ ## ctl_name ## _pvalue = \ -+{ .get = snd_ak4641_uctl_ ## ctl_name ## _get, \ -+ .set = snd_ak4641_uctl_ ## ctl_name ## _set }; \ -+static struct snd_kcontrol_new snd_ak4641_actl_ ## ctl_name = \ -+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = _name, .info = snd_ak4641_actl_bool_info, \ -+ .get = snd_ak4641_actl_bool_get, .put = snd_ak4641_actl_bool_put, \ -+ .private_value = (unsigned long) &snd_ak4641_actl_ ## ctl_name ## _pvalue }; -+ -+ACTL_BOOL(playback_switch, "Master Playback Switch") -+ACTL_BOOL(mic_boost, "Mic Boost (+20dB)") -+ACTL_BOOL(mono_out, "Phone mic enable") -+ -+static void snd_ak4641_headphone_on(struct snd_ak4641 *ak, int on); -+static void snd_ak4641_speaker_on(struct snd_ak4641 *ak, int on); -+static void snd_ak4641_select_mic(struct snd_ak4641 *ak); -+ -+void snd_ak4641_hp_connected(struct snd_ak4641 *ak, int connected) -+{ -+ snd_ak4641_lock(ak); -+ if (connected != ak->hp_connected) { -+ ak->hp_connected = connected; -+ -+ /* headphone or speaker, on playback */ -+ if (ak->playback_on) { -+ if (connected) { -+ snd_ak4641_headphone_on(ak, 1); -+ snd_ak4641_speaker_on(ak, 0); -+ } else { -+ snd_ak4641_speaker_on(ak, 1); -+ snd_ak4641_headphone_on(ak, 0); -+ } -+ } -+ -+ /* headset or internal mic, on capture */ -+ if (ak->capture_on) -+ snd_ak4641_select_mic(ak); -+ } -+ snd_ak4641_unlock(ak); -+} -+ -+/* end {{ Controls }} */ -+ -+ -+/* begin {{ Headphone Detected Notification }} */ -+ -+static void snd_ak4641_hp_detected_w_fn(void *p) -+{ -+ struct snd_ak4641 *ak = (struct snd_ak4641 *)p; -+ -+ snd_ak4641_hp_connected(ak, ak->hp_detected.detected); -+} -+ -+void snd_ak4641_hp_detected(struct snd_ak4641 *ak, int detected) -+{ -+ if (detected != ak->hp_detected.detected) { -+ ak->hp_detected.detected = detected; -+ queue_work(ak->hp_detected.wq, &ak->hp_detected.w); -+ } -+} -+ -+static int snd_ak4641_hp_detected_init(struct snd_ak4641 *ak) -+{ -+ INIT_WORK(&ak->hp_detected.w, snd_ak4641_hp_detected_w_fn); -+ ak->hp_detected.detected = ak->hp_connected; -+ ak->hp_detected.wq = create_singlethread_workqueue("ak4641"); -+ if (ak->hp_detected.wq) return 0; -+ else return -1; -+} -+ -+static void snd_ak4641_hp_detected_free(struct snd_ak4641 *ak) -+{ -+ destroy_workqueue(ak->hp_detected.wq); -+} -+ -+/* end {{ Headphone Detected Notification }} */ -+ -+ -+/* begin {{ Codec Control }} */ -+ -+static void snd_ak4641_headphone_on(struct snd_ak4641 *ak, int on) -+{ -+ if (on) { -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ ak->headphone_out_on(1); -+ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], -+ R_SEL2_PSLOL | R_SEL2_PSLOR, -+ R_SEL2_PSLOL | R_SEL2_PSLOR); -+ snd_ak4641_hwsync_write(ak, R_SEL2); -+ } else { -+ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], -+ 0x00, R_SEL2_PSLOL | R_SEL2_PSLOR); -+ snd_ak4641_hwsync_write(ak, R_SEL2); -+ ak->headphone_out_on(0); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ } -+} -+ -+static void snd_ak4641_speaker_on(struct snd_ak4641 *ak, int on) -+{ -+ if (on) { -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ ak->speaker_out_on(1); -+ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], -+ R_SEL2_PSLOL | R_SEL2_PSLOR, -+ R_SEL2_PSLOL | R_SEL2_PSLOR); -+ snd_ak4641_hwsync_write(ak, R_SEL2); -+ } else { -+ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], -+ 0x00, R_SEL2_PSLOL | R_SEL2_PSLOR); -+ snd_ak4641_hwsync_write(ak, R_SEL2); -+ ak->speaker_out_on(0); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ } -+} -+ -+static inline int snd_ak4641_power_on(struct snd_ak4641 *ak) -+{ -+ ak->reset_pin(1); -+ ak->power_on_chip(1); -+ msleep(1); -+ ak->reset_pin(0); -+ ak->powered_on = 1; -+ return 0; -+} -+ -+static inline int snd_ak4641_power_off(struct snd_ak4641 *ak) -+{ -+ ak->powered_on = 0; -+ ak->power_on_chip(0); -+ return 0; -+} -+ -+static inline void snd_ak4641_headphone_out_on(struct snd_ak4641 *ak, int on) -+{ -+ if (ak->headphone_out_on) ak->headphone_out_on(on); -+} -+ -+static inline void snd_ak4641_speaker_out_on(struct snd_ak4641 *ak, int on) -+{ -+ if (ak->speaker_out_on) ak->speaker_out_on(on); -+} -+ -+static int snd_ak4641_playback_on(struct snd_ak4641 *ak) -+{ -+ if (ak->playback_on) return 0; -+ -+ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], -+ R_PM2_PMDAC, R_PM2_MCKPD | R_PM2_PMDAC); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO); -+ snd_ak4641_hwsync_write(ak, R_PM2); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ if (ak->hp_connected) snd_ak4641_headphone_on(ak, 1); -+ else snd_ak4641_speaker_on(ak, 1); -+ -+ ak->playback_on = 1; -+ -+ return 0; -+} -+ -+static int snd_ak4641_playback_off(struct snd_ak4641 *ak) -+{ -+ if (!ak->playback_on) return 0; -+ -+ ak->playback_on = 0; -+ -+ if (ak->hp_connected) snd_ak4641_headphone_on(ak, 0); -+ else snd_ak4641_speaker_on(ak, 0); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO); -+ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], -+ (!ak->capture_on ? R_PM2_MCKPD : 0x00) | R_PM2_PMDAC, -+ R_PM2_MCKPD | R_PM2_PMDAC); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ snd_ak4641_hwsync_write(ak, R_PM2); -+ -+ return 0; -+} -+ -+static void snd_ak4641_select_mic(struct snd_ak4641 *ak) -+{ -+ int mic = 0; -+ u8 r_mic; -+ -+ if (ak->hp_connected) { -+ /* check headset mic */ -+ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], R_MIC_MPWRE, R_MIC_MPWRE); -+ snd_ak4641_hwsync_write(ak, R_MIC); -+ snd_ak4641_hwsync_read(ak, R_STATUS); -+ mic = (ak->regs[R_STATUS] & R_STATUS_DTMIC) == R_STATUS_DTMIC; -+ -+ printk("htcuniversal_ak4641_select_mic: mic=%d\n",mic); -+ -+ r_mic = WRITE_MASK(ak->regs[R_MIC], -+ R_MIC_MSEL | (ak->capture_on ? R_MIC_MPWRE : 0x00), -+ R_MIC_MSEL | R_MIC_MPWRI | R_MIC_MPWRE); -+ } -+ else -+ r_mic = WRITE_MASK(ak->regs[R_MIC], -+ 0x00 | (ak->capture_on ? R_MIC_MPWRI : 0x00), -+ R_MIC_MSEL | R_MIC_MPWRI | R_MIC_MPWRE); -+ -+ if (r_mic != ak->regs[R_MIC]) { -+ ak->regs[R_MIC] = r_mic; -+ snd_ak4641_hwsync_write(ak, R_MIC); -+ } -+} -+ -+static int snd_ak4641_capture_on(struct snd_ak4641 *ak) -+{ -+ if (ak->capture_on) return 0; -+ -+ if (!ak->playback_on) { -+ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], 0x00, R_PM2_MCKPD); -+ snd_ak4641_hwsync_write(ak, R_PM2); -+ } -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMMIC | R_PM1_PMADC, -+ R_PM1_PMMIC | R_PM1_PMADC); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ snd_ak4641_hwsync_write(ak, R_PGA); /* mic PGA gain is reset when PMMIC = 0 */ -+ -+ ak->capture_on = 1; -+ -+ snd_ak4641_select_mic(ak); -+ -+ msleep(47); /* accounts for ADC init cycle, time enough for fs >= 44.1 kHz */ -+ -+ return 0; -+} -+ -+static int snd_ak4641_capture_off(struct snd_ak4641 *ak) -+{ -+ if (!ak->capture_on) return 0; -+ -+ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], -+ 0x00, R_MIC_MPWRI | R_MIC_MPWRE | R_MIC_MSEL); -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMMIC | R_PM1_PMADC); -+ snd_ak4641_hwsync_write(ak, R_MIC); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ if (!ak->playback_on) { -+ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], R_PM2_MCKPD, R_PM2_MCKPD); -+ snd_ak4641_hwsync_write(ak, R_PM2); -+ } -+ -+ ak->capture_on = 0; -+ -+ return 0; -+} -+ -+int snd_ak4641_open_stream(struct snd_ak4641 *ak, int stream) -+{ -+ snd_ak4641_lock(ak); -+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) { -+ ak->playback_stream_opened = 1; -+ snd_ak4641_playback_on(ak); -+ } else { -+ ak->capture_stream_opened = 1; -+ snd_ak4641_capture_on(ak); -+ } -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+int snd_ak4641_close_stream(struct snd_ak4641 *ak, int stream) -+{ -+ snd_ak4641_lock(ak); -+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) { -+ ak->playback_stream_opened = 0; -+ snd_ak4641_playback_off(ak); -+ } else { -+ ak->capture_stream_opened = 0; -+ snd_ak4641_capture_off(ak); -+ } -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+static int snd_ak4641_init_regs(struct snd_ak4641 *ak) -+{ -+ snd_ak4641_hwsync_read_all(ak); -+ -+ //@@ MEMO: add some configs -+ -+ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMVCM, R_PM1_PMVCM); -+ ak->regs[R_DAC] = WRITE_MASK(ak->regs[R_DAC], 0x00, R_DAC_DATTC); -+ snd_ak4641_hwsync_write(ak, R_PM1); -+ snd_ak4641_hwsync_write(ak, R_DAC); -+ -+ return 0; -+} -+ -+int snd_ak4641_suspend(struct snd_ak4641 *ak, pm_message_t state) -+{ -+ snd_ak4641_lock(ak); -+ if (ak->playback_on) snd_ak4641_playback_off(ak); -+ if (ak->capture_on) snd_ak4641_capture_off(ak); -+ snd_ak4641_power_off(ak); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+int snd_ak4641_resume(struct snd_ak4641 *ak) -+{ -+ snd_ak4641_lock(ak); -+ snd_ak4641_power_on(ak); -+ snd_ak4641_hwsync_write_all(ak); -+ if (ak->playback_stream_opened) snd_ak4641_playback_on(ak); -+ if (ak->capture_stream_opened) snd_ak4641_capture_on(ak); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+static void snd_ak4641_init_ak(struct snd_ak4641 *ak) -+{ -+ init_MUTEX(&ak->sem); -+ ak->i2c_client.driver = &snd_ak4641_i2c_driver; -+} -+ -+int snd_ak4641_activate(struct snd_ak4641 *ak) -+{ -+ int ret = 0; -+ -+ snd_ak4641_init_ak(ak); -+ snd_ak4641_lock(ak); -+ snd_ak4641_power_on(ak); -+ if ((ret = snd_ak4641_i2c_attach(ak)) < 0) -+ goto failed_i2c_attach; -+ snd_ak4641_init_regs(ak); -+ if ((ret = snd_ak4641_hp_detected_init(ak)) < 0) -+ goto failed_hp_detected_init; -+ snd_ak4641_unlock(ak); -+ return 0; -+ -+ failed_hp_detected_init: -+ snd_ak4641_i2c_detach(ak); -+ failed_i2c_attach: -+ snd_ak4641_power_off(ak); -+ snd_ak4641_unlock(ak); -+ return ret; -+} -+ -+void snd_ak4641_deactivate(struct snd_ak4641 *ak) -+{ -+ snd_ak4641_lock(ak); -+ snd_ak4641_hp_detected_free(ak); -+ snd_ak4641_i2c_detach(ak); -+ snd_ak4641_power_off(ak); -+ snd_ak4641_unlock(ak); -+} -+ -+int snd_ak4641_add_mixer_controls(struct snd_ak4641 *ak, struct snd_card *card) -+{ -+ snd_ak4641_lock(ak); -+ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_playback_volume, ak)); -+ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_playback_switch, ak)); -+ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mic_gain, ak)); -+ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mic_boost, ak)); -+ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mono_out, ak)); -+ snd_ak4641_unlock(ak); -+ return 0; -+} -+ -+/* end {{ Codec Control }} */ -+ -+ -+/* begin {{ Module }} */ -+ -+static int __init snd_ak4641_module_on_load(void) -+{ -+ snd_ak4641_i2c_init(); -+ return 0; -+} -+ -+static void __exit snd_ak4641_module_on_unload(void) -+{ -+ snd_ak4641_i2c_free(); -+} -+ -+module_init(snd_ak4641_module_on_load); -+module_exit(snd_ak4641_module_on_unload); -+ -+EXPORT_SYMBOL(snd_ak4641_activate); -+EXPORT_SYMBOL(snd_ak4641_deactivate); -+EXPORT_SYMBOL(snd_ak4641_add_mixer_controls); -+EXPORT_SYMBOL(snd_ak4641_open_stream); -+EXPORT_SYMBOL(snd_ak4641_close_stream); -+EXPORT_SYMBOL(snd_ak4641_suspend); -+EXPORT_SYMBOL(snd_ak4641_resume); -+EXPORT_SYMBOL(snd_ak4641_hp_connected); -+EXPORT_SYMBOL(snd_ak4641_hp_detected); -+ -+MODULE_AUTHOR("Giorgio Padrin"); -+MODULE_DESCRIPTION("Audio support for codec Asahi Kasei AK4641"); -+MODULE_LICENSE("GPL"); -+ -+/* end {{ Module }} */ -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,65 @@ -+/* -+ * Audio support for codec Asahi Kasei AK4641 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Copyright (c) 2006 Giorgio Padrin -+ */ -+ -+#ifndef __SOUND_AK4641_H -+#define __SOUND_AK4641_H -+ -+#include -+ -+struct snd_ak4641 { -+ struct semaphore sem; -+ -+ u8 regs[0x14]; /* registers cache */ -+ -+ unsigned int -+ powered_on:1, -+ playback_on:1, -+ playback_stream_opened:1, -+ capture_on:1, -+ capture_stream_opened:1; -+ -+ unsigned int -+ hp_connected:1; -+ -+ /* -- configuration (to fill before activation) -- */ -+ void (*power_on_chip)(int on); -+ void (*reset_pin)(int on); -+ void (*headphone_out_on)(int on); -+ void (*speaker_out_on)(int on); -+ -+ struct i2c_client i2c_client; /* to fill .adapter */ -+ /* ----------------------------------------------- */ -+ -+ struct { -+ int detected; -+ struct workqueue_struct *wq; -+ struct work_struct w; -+ } hp_detected; -+}; -+ -+ -+/* Note: opening, closing, suspending and resuming a stream -+ * require the clocks (MCLK and I2S ones) running -+ */ -+ -+/* don't forget to specify I2C adapter in i2c_client field */ -+int snd_ak4641_activate(struct snd_ak4641 *ak); -+ -+void snd_ak4641_deactivate(struct snd_ak4641 *ak); -+int snd_ak4641_add_mixer_controls(struct snd_ak4641 *ak, struct snd_card *card); -+int snd_ak4641_open_stream(struct snd_ak4641 *ak, int stream); -+int snd_ak4641_close_stream(struct snd_ak4641 *ak, int stream); -+int snd_ak4641_suspend(struct snd_ak4641 *ak, pm_message_t state); -+int snd_ak4641_resume(struct snd_ak4641 *ak); -+ -+void snd_ak4641_hp_connected(struct snd_ak4641 *ak, int connected); /* non atomic context */ -+void snd_ak4641_hp_detected(struct snd_ak4641 *ak, int detected); /* atomic context */ -+ -+#endif /* __SOUND_AK4641_H */ -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,143 @@ -+/* -+ * LEDs support for the HP iPaq hx4700 -+ * -+ * Copyright (c) 2006 Anton Vorontsov -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+//FIXME -+//DEFINE_LED_TRIGGER_SHARED_GLOBAL(htcuniversal_radio_trig); -+//EXPORT_LED_TRIGGER_SHARED(htcuniversal_radio_trig); -+ -+static struct asic3_led htcuniversal_leds[] = { -+ { -+ .led_cdev = { -+ .name = "htcuniversal:red", -+ .default_trigger = "htcuniversal-charging", -+ }, -+ .hw_num = 2, -+ -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:green", -+ .default_trigger = "htcuniversal-chargefull", -+ }, -+ .hw_num = 1, -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:wifi-bt", -+ .default_trigger = "htcuniversal-radio", -+ }, -+ .hw_num = 0, -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:phonebuttons", -+ .default_trigger = "htcuniversal-phonebuttons", -+ }, -+ .hw_num = -1, -+ .gpio_num = ('D'-'A')*16+GPIOD_BL_KEYP_PWR_ON, -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:vibra", -+ .default_trigger = "htcuniversal-vibra", -+ }, -+ .hw_num = -1, -+ .gpio_num = ('D'-'A')*16+GPIOD_VIBRA_PWR_ON, -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:flashlight1", -+ .default_trigger = "htcuniversal-flashlight1", -+ }, -+ .hw_num = -1, -+ .gpio_num = ('A'-'A')*16+GPIOA_FLASHLIGHT, -+ }, -+ { -+ .led_cdev = { -+ .name = "htcuniversal:kbdbacklight", -+ .default_trigger = "htcuniversal-kbdbacklight", -+ }, -+ .hw_num = -1, -+ .gpio_num = ('D'-'A')*16+GPIOD_BL_KEYB_PWR_ON, -+ }, -+}; -+ -+void htcuniversal_leds_release(struct device *dev) -+{ -+ return; -+} -+ -+static -+struct asic3_leds_machinfo htcuniversal_leds_machinfo = { -+ .num_leds = ARRAY_SIZE(htcuniversal_leds), -+ .leds = htcuniversal_leds, -+ .asic3_pdev = &htcuniversal_asic3, -+}; -+ -+static -+struct platform_device htcuniversal_leds_pdev = { -+ .name = "asic3-leds", -+ .dev = { -+ .platform_data = &htcuniversal_leds_machinfo, -+ .release = htcuniversal_leds_release, -+ }, -+}; -+ -+static -+int __init htcuniversal_leds_init(void) -+{ -+ int ret; -+ printk("htcuniversal LEDs Driver\n"); -+// led_trigger_register_shared("htcuniversal-radio", &htcuniversal_radio_trig); -+ -+ ret = asic3_leds_register(); -+ if (ret) goto asic3_leds_failed; -+ -+ ret = platform_device_register(&htcuniversal_leds_pdev); -+ if (ret) goto platform_device_failed; -+ -+ goto success; -+ -+platform_device_failed: -+ asic3_leds_unregister(); -+asic3_leds_failed: -+// led_trigger_unregister_shared(htcuniversal_radio_trig); -+ printk("htcuniversal LEDs Driver failed to init"); -+success: -+ return ret; -+} -+ -+static -+void __exit htcuniversal_leds_exit(void) -+{ -+// led_trigger_unregister_shared(htcuniversal_radio_trig); -+ platform_device_unregister(&htcuniversal_leds_pdev); -+ asic3_leds_unregister(); -+ return; -+} -+ -+module_init(htcuniversal_leds_init); -+module_exit(htcuniversal_leds_exit); -+ -+MODULE_AUTHOR("Anton Vorontsov "); -+MODULE_DESCRIPTION("htcuniversal LEDs driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,61 @@ -+/* -+ * Use consistent with the GNU GPL is permitted, -+ * provided that this copyright notice is -+ * preserved in its entirety in all copies and derived works. -+ * -+ * Copyright (C) 2006 Paul Sokolosvky -+ * Based on code from older versions of htcuniversal_lcd.c -+ * -+ */ -+ -+#include -+#include -+#include /* for pxa-regs.h (__REG) */ -+#include -+#include /* machine_is_htcuniversal */ -+//#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#define HTCUNIVERSAL_MAX_INTENSITY 0xc7 -+ -+static void htcuniversal_set_bl_intensity(int intensity) -+{ -+ PWM_CTRL1 = 1; /* pre-scaler */ -+ PWM_PWDUTY1 = intensity; /* duty cycle */ -+ PWM_PERVAL1 = HTCUNIVERSAL_MAX_INTENSITY+1; /* period */ -+ -+ if (intensity > 0) { -+ pxa_set_cken(CKEN_PWM1, 1); -+ asic3_set_gpio_out_d(&htcuniversal_asic3.dev, -+ (1<"); -+MODULE_DESCRIPTION("Backlight driver for HTC Universal"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,135 @@ -+/* Bluetooth interface driver for TI BRF6150 on HX4700 -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * 2005-04-21 Todd Blumer Created. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "htcuniversal_bt.h" -+ -+static uint use_led=1; -+ -+static void -+htcuniversal_bt_configure( int state ) -+{ -+ int tries; -+ -+ printk( KERN_NOTICE "htcuniversal configure bluetooth: %d\n", state ); -+ switch (state) { -+ -+ case PXA_UART_CFG_PRE_STARTUP: -+ break; -+ -+ case PXA_UART_CFG_POST_STARTUP: -+ /* pre-serial-up hardware configuration */ -+ htcuniversal_egpio_enable(1< CTS=1). Typical 150ms -+ */ -+ tries = 0; -+ do { -+ mdelay(10); -+ } while ((BTMSR & MSR_CTS) == 0 && tries++ < 50); -+ if (use_led) { -+// htcuniversal_set_led(2, 16, 16); -+ } -+ break; -+ -+ case PXA_UART_CFG_PRE_SHUTDOWN: -+ htcuniversal_egpio_disable(1<dev.platform_data; -+ -+ /* configure bluetooth UART */ -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_RXD_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_TXD_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_UART_CTS_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_UART_RTS_MD ); -+ -+ funcs->configure = htcuniversal_bt_configure; -+ -+ /* Make sure the LED is off */ -+// htcuniversal_clear_led(2); -+ -+ return 0; -+} -+ -+static int -+htcuniversal_bt_remove( struct platform_device *dev ) -+{ -+ struct htcuniversal_bt_funcs *funcs = dev->dev.platform_data; -+ -+ funcs->configure = NULL; -+ -+ /* Make sure the LED is off */ -+// htcuniversal_clear_led(2); -+ -+ return 0; -+} -+ -+static struct platform_driver bt_driver = { -+ .driver = { -+ .name = "htcuniversal_bt", -+ }, -+ .probe = htcuniversal_bt_probe, -+ .remove = htcuniversal_bt_remove, -+}; -+ -+module_param(use_led, uint, 0); -+ -+static int __init -+htcuniversal_bt_init( void ) -+{ -+ printk(KERN_NOTICE "htcuniversal Bluetooth Driver\n"); -+ return platform_driver_register( &bt_driver ); -+} -+ -+static void __exit -+htcuniversal_bt_exit( void ) -+{ -+ platform_driver_unregister( &bt_driver ); -+} -+ -+module_init( htcuniversal_bt_init ); -+module_exit( htcuniversal_bt_exit ); -+ -+MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC"); -+MODULE_DESCRIPTION("HTC Universal Bluetooth Support Driver"); -+MODULE_LICENSE("GPL"); -+ -+/* vim600: set noexpandtab sw=8 ts=8 :*/ -+ -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,17 @@ -+/* -+ * Bluetooth support file for calling bluetooth configuration functions -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * 2005-06 Todd Blumer Initial Revision -+ */ -+ -+#ifndef _HTCUNIVERSAL_BT_H -+#define _HTCUNIVERSAL_BT_H -+ -+struct htcuniversal_bt_funcs { -+ void (*configure) ( int state ); -+}; -+ -+ -+#endif -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,87 @@ -+/* -+ * Buttons driver for HTC Universal -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. -+ * -+ * Copyright (C) 2005 Pawel Kolodziejski -+ * Copyright (C) 2003 Joshua Wise -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static struct asic3_keys_button asic3_buttons[] = { -+//{KEY_SCREEN, ASIC3_GPIOA_IRQ_BASE+GPIOA_COVER_ROTATE_N, 1, "screen_cover", EV_SW}, -+//{KEY_SWITCHVIDEOMODE, ASIC3_GPIOB_IRQ_BASE+GPIOB_CLAMSHELL_N, 1, "clamshell_rotate", EV_SW}, -+//{KEY_KBDILLUMTOGGLE, ASIC3_GPIOB_IRQ_BASE+GPIOB_NIGHT_SENSOR, 1, "night_sensor", EV_SW}, -+{SW_LID, ASIC3_GPIOA_IRQ_BASE+GPIOA_COVER_ROTATE_N, 1, "screen_cover", EV_SW}, -+{SW_TABLET_MODE, ASIC3_GPIOB_IRQ_BASE+GPIOB_CLAMSHELL_N, 1, "clamshell_rotate", EV_SW}, -+//{SW_NIGHT_SENSOR, ASIC3_GPIOB_IRQ_BASE+GPIOB_NIGHT_SENSOR, 1, "night_sensor", EV_SW}, -+{KEY_F10, ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_BACKLIGHT_N, 1, "backlight_button"}, -+{KEY_RECORD, ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_RECORD_N, 1, "record_button"}, -+{KEY_CAMERA, ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_CAMERA_N, 1, "camera_button"}, -+{KEY_VOLUMEDOWN, ASIC3_GPIOA_IRQ_BASE+GPIOA_VOL_UP_N, 1, "volume_slider_down"}, -+{KEY_VOLUMEUP, ASIC3_GPIOA_IRQ_BASE+GPIOA_VOL_DOWN_N, 1, "volume_slider_up"}, -+{KEY_KPENTER, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_OK_N, 1, "select"}, -+{KEY_RIGHT, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_RIGHT_N, 1, "right"}, -+{KEY_LEFT, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_LEFT_N, 1, "left"}, -+{KEY_DOWN, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_DOWN_N, 1, "down"}, -+{KEY_UP, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_UP_N, 1, "up"}, -+}; -+ -+static struct asic3_keys_platform_data asic3_keys_data = { -+ .buttons = asic3_buttons, -+ .nbuttons = ARRAY_SIZE(asic3_buttons), -+ .asic3_dev = &htcuniversal_asic3.dev, -+}; -+ -+static struct platform_device htcuniversal_keys_asic3 = { -+ .name = "asic3-keys", -+ .dev = { .platform_data = &asic3_keys_data, } -+}; -+ -+static int __init htcuniversal_buttons_probe(struct platform_device *dev) -+{ -+ platform_device_register(&htcuniversal_keys_asic3); -+ return 0; -+} -+ -+static struct platform_driver htcuniversal_buttons_driver = { -+ .driver = { -+ .name = "htcuniversal_buttons", -+ }, -+ .probe = htcuniversal_buttons_probe, -+}; -+ -+static int __init htcuniversal_buttons_init(void) -+{ -+ if (!machine_is_htcuniversal()) -+ return -ENODEV; -+ -+ return platform_driver_register(&htcuniversal_buttons_driver); -+} -+ -+static void __exit htcuniversal_buttons_exit(void) -+{ -+ platform_driver_unregister(&htcuniversal_buttons_driver); -+} -+ -+module_init(htcuniversal_buttons_init); -+module_exit(htcuniversal_buttons_exit); -+ -+MODULE_AUTHOR ("Joshua Wise, Pawel Kolodziejski, Paul Sokolosvky"); -+MODULE_DESCRIPTION ("Buttons support for HTC Universal"); -+MODULE_LICENSE ("GPL"); -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,226 @@ -+/* Core Hardware driver for Hx4700 (Serial, ASIC3, EGPIOs) -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * 2005-03-29 Todd Blumer Converted basic structure to support hx4700 -+ * 2005-04-30 Todd Blumer Add IRDA code from H2200 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+volatile u_int16_t *egpios; -+u_int16_t egpio_reg; -+ -+static int htc_bootloader = 0; /* Is the stock HTC bootloader installed? */ -+ -+/* -+ * may make sense to put egpios elsewhere, but they're here now -+ * since they share some of the same address space with the TI WLAN -+ * -+ * EGPIO register is write-only -+ */ -+ -+void -+htcuniversal_egpio_enable( u_int16_t bits ) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ egpio_reg |= bits; -+ *egpios = egpio_reg; -+ -+ local_irq_restore(flags); -+} -+EXPORT_SYMBOL_GPL(htcuniversal_egpio_enable); -+ -+void -+htcuniversal_egpio_disable( u_int16_t bits ) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ egpio_reg &= ~bits; -+ *egpios = egpio_reg; -+ -+ local_irq_restore(flags); -+} -+EXPORT_SYMBOL_GPL(htcuniversal_egpio_disable); -+ -+#ifdef CONFIG_PM -+ -+//void htcuniversal_ll_pm_init(void); -+ -+static int htcuniversal_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ /* Turn off external clocks here, because htcuniversal_power and asic3_mmc -+ * scared to do so to not hurt each other. (-5 mA) */ -+ -+ -+ /* 0x20c2 is HTC clock value -+ * CLOCK_CDEX_SOURCE 2 -+ * CLOCK_CDEX_SPI 0 -+ * CLOCK_CDEX_OWM 0 -+ * -+ * CLOCK_CDEX_PWM0 0 -+ * CLOCK_CDEX_PWM1 0 -+ * CLOCK_CDEX_LED0 1 -+ * CLOCK_CDEX_LED1 1 -+ * -+ * CLOCK_CDEX_LED2 0 -+ * CLOCK_CDEX_SD_HOST 0 -+ * CLOCK_CDEX_SD_BUS 0 -+ * CLOCK_CDEX_SMBUS 0 -+ * -+ * CLOCK_CDEX_CONTROL_CX 0 -+ * CLOCK_CDEX_EX0 1 -+ * CLOCK_CDEX_EX1 0 -+ * */ -+ asic3_set_clock_cdex(&htcuniversal_asic3.dev, 0xffff, CLOCK_CDEX_SOURCE1 -+ |CLOCK_CDEX_LED0 -+ |CLOCK_CDEX_LED1 -+ |CLOCK_CDEX_LED2 -+ |CLOCK_CDEX_EX0 -+ |CLOCK_CDEX_EX1); -+ -+ *egpios = 0; /* turn off all egpio power */ -+ -+ /* Wake up enable. */ -+ PWER = PWER_GPIO0 -+ | PWER_GPIO1 /* reset */ -+ | PWER_GPIO9 /* USB */ -+ | PWER_GPIO10 /* AC on USB */ -+ | PWER_GPIO14 /* ASIC3 mux */ -+ | PWER_RTC; -+ /* Wake up on falling edge. */ -+ PFER = PWER_GPIO0 -+ | PWER_GPIO1 -+ | PWER_GPIO9 -+ | PWER_GPIO10 -+ | PWER_GPIO14; -+ -+ /* Wake up on rising edge. */ -+ PRER = PWER_GPIO0 -+ | PWER_GPIO1 -+ | PWER_GPIO9 -+ | PWER_GPIO10; -+ /* 3.6864 MHz oscillator power-down enable */ -+ PCFR = PCFR_OPDE | PCFR_PI2CEN | PCFR_GPROD | PCFR_GPR_EN; -+ -+ PGSR0 = 0x09088004; -+ PGSR1 = 0x00020002; -+ PGSR2 = 0x8001c000; -+ PGSR3 = 0x00106284; -+ -+ PSLR = 0xcc000000; -+ -+#if 0 -+ /* -+ * If we're using bootldr and not the stock HTC bootloader, -+ * we want to wake up periodically to see if the charge is full while -+ * it is suspended. We do this with the OS timer 4 in the pxa270. -+ */ -+ if (!htc_bootloader) { -+ OMCR4 = 0x4b; /* Periodic, self-resetting, 1-second timer */ -+ OSMR4 = 5; /* Wake up bootldr after x seconds so it can -+ figure out what to do with the LEDs. */ -+ OIER |= 0x10; /* Enable interrupt source for Timer 4 */ -+ OSCR4 = 0; /* This starts the timer */ -+ } -+#endif -+ -+ asic3_set_extcf_select(&htcuniversal_asic3.dev, ASIC3_EXTCF_OWM_EN, 0); -+ -+ return 0; -+} -+ -+static int htcuniversal_resume(struct platform_device *dev) -+{ -+ htcuniversal_egpio_enable(0); -+ -+ return 0; -+} -+#else -+# define htcuniversal_suspend NULL -+# define htcuniversal_resume NULL -+#endif -+ -+static int -+htcuniversal_core_probe( struct platform_device *dev ) -+{ -+ -+ printk( KERN_NOTICE "HTC Universal Core Hardware Driver\n" ); -+ -+ egpios = (volatile u_int16_t *)ioremap_nocache(HTCUNIVERSAL_EGPIO_BASE, sizeof *egpios ); -+ if (!egpios) -+ return -ENODEV; -+ else -+ printk( KERN_NOTICE "HTC Universal Core: egpio at phy=0x%8.8x is at virt=0x%p\n", -+ HTCUNIVERSAL_EGPIO_BASE, egpios ); -+ -+ printk("Using stock HTC first stage bootloader\n"); -+ htc_bootloader = 1; -+ -+// htcuniversal_ll_pm_init(); -+ -+ return 0; -+} -+ -+static int -+htcuniversal_core_remove( struct platform_device *dev ) -+{ -+ -+ if (egpios != NULL) -+ iounmap( (void *)egpios ); -+ -+ return 0; -+} -+ -+static struct platform_driver htcuniversal_core_driver = { -+ .driver = { -+ .name = "htcuniversal_core", -+ }, -+ .probe = htcuniversal_core_probe, -+ .remove = htcuniversal_core_remove, -+ .suspend = htcuniversal_suspend, -+ .resume = htcuniversal_resume, -+}; -+ -+static int __init -+htcuniversal_core_init( void ) -+{ -+ return platform_driver_register( &htcuniversal_core_driver ); -+} -+ -+ -+static void __exit -+htcuniversal_core_exit( void ) -+{ -+ platform_driver_unregister( &htcuniversal_core_driver ); -+} -+ -+module_init( htcuniversal_core_init ); -+module_exit( htcuniversal_core_exit ); -+ -+MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC"); -+MODULE_DESCRIPTION("HTC Universal Core Hardware Driver"); -+MODULE_LICENSE("GPL"); -+ -+/* vim600: set noexpandtab sw=8 ts=8 :*/ -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,212 @@ -+/* -+ * Use consistent with the GNU GPL is permitted, -+ * provided that this copyright notice is -+ * preserved in its entirety in all copies and derived works. -+ * -+ * History: -+ * -+ * 2004-03-01 Eddi De Pieri Adapted for htcuniversal using h3900_lcd.c -+ * 2004 Shawn Anderson Lcd hacking on htcuniversal -+ * see h3900_lcd.c for more history. -+ * -+ */ -+ -+#include -+#include /* for pxa-regs.h (__REG) */ -+#include -+#include /* LCCR[0,1,2,3]* */ -+#include /* for pxa-regs.h (Fld, etc) */ -+#include /* pxafb_mach_info, set_pxa_fb_info */ -+#include /* machine_is_htcuniversal */ -+#include /* lcd_device */ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+static int saved_lcdpower=-1; -+ -+static int powerup_lcd(void) -+{ -+ printk( KERN_INFO "htcuniversal powerup_lcd: called\n"); -+ -+ asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<dev, NULL, -+ &htcuniversal_lcd_properties); -+ if (IS_ERR(htcuniversal_lcd_dev)) { -+ printk("htcuniversal_lcd_probe: error registering devices\n"); -+ return -1; -+ } -+ -+ return 0; -+} -+ -+static int htcuniversal_lcd_remove(struct platform_device * dev) -+{ -+ htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 4); -+ lcd_device_unregister(htcuniversal_lcd_dev); -+ -+ return 0; -+} -+ -+static int htcuniversal_lcd_suspend(struct platform_device * dev, pm_message_t state) -+{ -+// printk("htcuniversal_lcd_suspend: called.\n"); -+ htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 4); -+ return 0; -+} -+ -+static int htcuniversal_lcd_resume(struct platform_device * dev) -+{ -+// printk("htcuniversal_lcd_resume: called.\n"); -+ -+ /* */ -+#if 1 -+ LCCR4|=LCCR4_PCDDIV; -+#endif -+ -+ htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 0); -+ return 0; -+} -+ -+static struct platform_driver htcuniversal_lcd_driver = { -+ .driver = { -+ .name = "htcuniversal_lcd", -+ }, -+ .probe = htcuniversal_lcd_probe, -+ .remove = htcuniversal_lcd_remove, -+ .suspend = htcuniversal_lcd_suspend, -+ .resume = htcuniversal_lcd_resume, -+}; -+ -+static int htcuniversal_lcd_init(void) -+{ -+ if (!machine_is_htcuniversal()) -+ return -ENODEV; -+ -+ return platform_driver_register(&htcuniversal_lcd_driver); -+} -+ -+static void htcuniversal_lcd_exit(void) -+{ -+ lcd_device_unregister(htcuniversal_lcd_dev); -+ platform_driver_unregister(&htcuniversal_lcd_driver); -+} -+ -+module_init(htcuniversal_lcd_init); -+module_exit(htcuniversal_lcd_exit); -+ -+MODULE_AUTHOR("xanadux.org"); -+MODULE_DESCRIPTION("Framebuffer driver for HTC Universal"); -+MODULE_LICENSE("GPL"); -+ -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,167 @@ -+ -+/* Phone interface driver for Qualcomm MSM6250 on HTC Universal -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * 2005-04-21 Todd Blumer Created. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "htcuniversal_phone.h" -+ -+static void phone_reset(void) -+{ -+ asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<dev.platform_data; -+ -+ /* configure phone UART */ -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_RXD_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_TXD_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS_MD ); -+ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS_MD ); -+ -+ funcs->configure = htcuniversal_phone_configure; -+ -+ return 0; -+} -+ -+static int -+htcuniversal_phone_remove( struct platform_device *dev ) -+{ -+ struct htcuniversal_phone_funcs *funcs = dev->dev.platform_data; -+ -+ funcs->configure = NULL; -+ -+ asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1< -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_PM -+ -+static u32 *addr_a0040000; -+static u32 *addr_a0040004; -+static u32 *addr_a0040008; -+static u32 *addr_a004000c; -+ -+static u32 save_a0040000; -+static u32 save_a0040004; -+static u32 save_a0040008; -+static u32 save_a004000c; -+ -+static void htcuniversal_pxa_ll_pm_suspend(unsigned long resume_addr) -+{ -+ save_a0040000 = *addr_a0040000; -+ save_a0040004 = *addr_a0040004; -+ save_a0040008 = *addr_a0040008; -+ save_a004000c = *addr_a004000c; -+ -+ /* jump to PSPR */ -+ *addr_a0040000 = 0xe3a00101; // mov r0, #0x40000000 -+ *addr_a0040004 = 0xe380060f; // orr r0, r0, #0x0f000000 -+ *addr_a0040008 = 0xe3800008; // orr r0, r0, #8 -+ *addr_a004000c = 0xe590f000; // ldr pc, [r0] -+} -+ -+static void htcuniversal_pxa_ll_pm_resume(void) -+{ -+ *addr_a0040000 = save_a0040000; -+ *addr_a0040004 = save_a0040004; -+ *addr_a0040008 = save_a0040008; -+ *addr_a004000c = save_a004000c; -+} -+ -+static struct pxa_ll_pm_ops htcuniversal_ll_pm_ops = { -+ .suspend = htcuniversal_pxa_ll_pm_suspend, -+ .resume = htcuniversal_pxa_ll_pm_resume, -+}; -+ -+void htcuniversal_ll_pm_init(void) { -+ addr_a0040000 = phys_to_virt(0xa0040000); -+ addr_a0040004 = phys_to_virt(0xa0040004); -+ addr_a0040008 = phys_to_virt(0xa0040008); -+ addr_a004000c = phys_to_virt(0xa004000c); -+ -+ pxa_pm_set_ll_ops(&htcuniversal_ll_pm_ops); -+} -+#endif /* CONFIG_PM */ -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,97 @@ -+/* -+ * pda_power driver for HTC Universal -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or (at -+ * your option) any later version. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+static void charge_on(int flags) -+{ -+ asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1< -+ * May 2003 -+ * -+ * Updates: -+ * -+ * 2004-02-11 Michael Opdenacker Renamed names from samcop to shamcop, -+ * Goal:support HAMCOP and SAMCOP. -+ * 2004-02-14 Michael Opdenacker Temporary fix for device id handling -+ * -+ * 2005-02-18 Aric Blumer Converted basic structure to support hx4700 -+ * -+ * 2005-06-07 Aric Blumer Added tssim device handling so we can -+ * hook in the fbvncserver. -+ */ -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+/* remove me */ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+ -+#include "tsc2046_ts.h" -+ -+enum touchscreen_state { -+ STATE_WAIT_FOR_TOUCH, /* Waiting for a PEN interrupt */ -+ STATE_SAMPLING /* Actively sampling ADC */ -+}; -+ -+struct touchscreen_data { -+ enum touchscreen_state state; -+ struct timer_list timer; -+ int irq; -+ struct input_dev *input; -+ /* */ -+ int port; -+ int clock; -+ int pwrbit_X; -+ int pwrbit_Y; -+ int (*pen_down)(void); -+}; -+ -+static unsigned long poll_sample_time = 10; /* Sample every 10 milliseconds */ -+ -+static struct touchscreen_data *ts_data; -+ -+static int irqblock; -+ -+module_param(poll_sample_time, ulong, 0644); -+MODULE_PARM_DESC(poll_sample_time, "Poll sample time"); -+ -+static inline void -+report_touchpanel(struct touchscreen_data *ts, int pressure, int x, int y) -+{ -+ input_report_abs(ts->input, ABS_PRESSURE, pressure); -+ input_report_abs(ts->input, ABS_X, x); -+ input_report_abs(ts->input, ABS_Y, y); -+ input_sync(ts->input); -+} -+ -+static void start_read(struct touchscreen_data *touch); -+ -+static irqreturn_t -+pen_isr(int irq, void *irq_desc) -+{ -+ struct touchscreen_data *ts = ts_data; -+ -+ if(irq == ts->irq /* && !irqblock */) { -+ irqblock = 1; -+ -+ /* -+ * Disable the pen interrupt. It's reenabled when the user lifts the -+ * pen. -+ */ -+ disable_irq(ts->irq); -+ -+ if (ts->state == STATE_WAIT_FOR_TOUCH) { -+ ts->state = STATE_SAMPLING; -+ start_read(ts); -+ } else { -+ /* Shouldn't happen */ -+ printk(KERN_ERR "Unexpected ts interrupt\n"); -+ } -+ -+ } -+ return IRQ_HANDLED; -+} -+ -+static void -+ssp_init(int port, int clock) -+{ -+ -+ pxa_set_cken(clock, 0); -+ -+ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_CLK_MD); -+ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_FRM_MD); -+ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DO_MD); -+ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DI_MD); -+ -+ SET_HTCUNIVERSAL_GPIO(SPI_FRM,1); -+ -+ /* *** Set up the SPI Registers *** */ -+ SSCR0_P(port) = -+ SSCR0_EDSS /* Extended Data Size Select */ -+ | SSCR0_SerClkDiv(7) /* Serial Clock Rate */ -+ /* Synchronous Serial Enable (Disable for now) */ -+ | SSCR0_Motorola /* Motorola SPI Interface */ -+ | SSCR0_DataSize(8) /* Data Size Select (24-bit) */ -+ ; -+ SSCR1_P(port) = 0; -+ SSPSP_P(port) = 0; -+ -+ /* Clear the Status */ -+ SSSR_P(port) = SSSR_P(port) & 0x00fcfffc; -+ -+ /* Now enable it */ -+ SSCR0_P(port) = -+ SSCR0_EDSS /* Extended Data Size Select */ -+ | SSCR0_SerClkDiv(7) /* Serial Clock Rate */ -+ | SSCR0_SSE /* Synchronous Serial Enable */ -+ | SSCR0_Motorola /* Motorola SPI Interface */ -+ | SSCR0_DataSize(8) /* Data Size Select (24-bit) */ -+ ; -+ -+ pxa_set_cken(clock, 1); -+} -+ -+static void -+start_read(struct touchscreen_data *touch) -+{ -+ unsigned long inc = (poll_sample_time * HZ) / 1000; -+ int i; -+ -+ /* Write here to the serial port. We request X and Y only for now. -+ * Then we have to wait for poll_sample_time before we read out the serial -+ * port. Then, when we read it out, we check to see if the pen is still -+ * down. If so, then we issue another request here. -+ */ -+#define TS_SAMPLES 7 -+ -+ /* -+ * We do four samples for each, and throw out the highest and lowest, then -+ * average the other two. -+ */ -+ -+ for(i = 0; i < TS_SAMPLES; i++) { -+ while(!(SSSR_P(touch->port) & SSSR_TNF)) -+ ; -+ /* It's not full. Write the command for X */ -+ SSDR_P(touch->port) = (TSC2046_SAMPLE_X|(touch->pwrbit_X))<<16; -+ } -+ -+ for(i = 0; i < TS_SAMPLES; i++) { -+ while(!(SSSR_P(touch->port) & SSSR_TNF)) -+ ; -+ /* It's not full. Write the command for Y */ -+ SSDR_P(touch->port) = (TSC2046_SAMPLE_Y|(touch->pwrbit_Y))<<16; -+ } -+ -+ /* -+ * Enable the timer. We should get an interrupt, but we want keep a timer -+ * to ensure that we can detect missing data -+ */ -+ mod_timer(&touch->timer, jiffies + inc); -+} -+ -+static void -+ts_timer_callback(unsigned long data) -+{ -+ struct touchscreen_data *ts = (struct touchscreen_data *)data; -+ int x, a[TS_SAMPLES], y; -+ static int oldx, oldy; -+ int ssrval; -+ -+ /* -+ * Check here to see if there is anything in the SPI FIFO. If so, -+ * return it if there has been a change. If not, then we have a -+ * timeout. Generate an erro somehow. -+ */ -+ ssrval = SSSR_P(ts->port); -+ -+ if(ssrval & SSSR_RNE) { /* Look at Rx Not Empty bit */ -+ int number_of_entries_in_fifo; -+ -+ /* The FIFO is not emtpy. Good! Now make sure there are at least two -+ * entries. (Should be two exactly.) */ -+ -+ number_of_entries_in_fifo = ((ssrval >> 12) & 0xf) + 1; -+ -+ if(number_of_entries_in_fifo < TS_SAMPLES * 2) { -+ /* Not ready yet. Come back later. */ -+ unsigned long inc = (poll_sample_time * HZ) / 1000; -+ mod_timer(&ts->timer, jiffies + inc); -+ return; -+ } -+ -+ if(number_of_entries_in_fifo == TS_SAMPLES * 2) { -+ int i, j; -+ -+ for(i = 0; i < TS_SAMPLES; i++) { -+ a[i] = SSDR_P(ts->port); -+ } -+ /* Sort them (bubble) */ -+ for(j = TS_SAMPLES - 1; j > 0; j--) { -+ for(i = 0; i < j; i++) { -+ if(a[i] > a[i + 1]) { -+ int tmp; -+ tmp = a[i+1]; -+ a[i+1] = a[i]; -+ a[i] = tmp; -+ } -+ } -+ } -+ -+ /* Take the average of the middle two */ -+ /* x = (a[TS_SAMPLES/2 - 1] + a[TS_SAMPLES/2] + a[TS_SAMPLES/2+1] + a[TS_SAMPLES/2+2]) >> 2; */ -+ x = a[TS_SAMPLES/2]; -+ -+ for(i = 0; i < TS_SAMPLES; i++) { -+ a[i] = SSDR_P(ts->port); -+ } -+ /* Sort them (bubble) */ -+ for(j = TS_SAMPLES - 1; j > 0; j--) { -+ for(i = 0; i < j; i++) { -+ if(a[i] > a[i + 1]) { -+ int tmp; -+ tmp = a[i+1]; -+ a[i+1] = a[i]; -+ a[i] = tmp; -+ } -+ } -+ } -+ -+ -+ /* Take the average of the middle two */ -+ /* y = (a[TS_SAMPLES/2 - 1] + a[TS_SAMPLES/2] + a[TS_SAMPLES/2+1] + a[TS_SAMPLES/2+2]) >> 2; */ -+ y = a[TS_SAMPLES/2]; -+ } else { -+ /* We have an error! Too many entries. */ -+ printk(KERN_ERR "TS: Expected %d entries. Got %d\n", TS_SAMPLES*2, number_of_entries_in_fifo); -+ /* Try to clear the FIFO */ -+ while(number_of_entries_in_fifo--) { -+ (void)SSDR_P(ts->port); -+ } -+ -+ if (ts->pen_down()) -+ start_read(ts); -+ -+ return; -+ } -+ } else { -+ /* Not ready yet. Come back later. */ -+ unsigned long inc = (poll_sample_time * HZ) / 1000; -+ mod_timer(&ts->timer, jiffies + inc); -+ return; -+ } -+ -+ /* -+ * Now we check to see if the pen is still down. If it is, then call -+ * start_read(). -+ */ -+ if (ts->pen_down()) -+ { -+ /* Still down */ -+ if(oldx != x || oldy != y) { -+ oldx = x; -+ oldy = y; -+ report_touchpanel(ts, 1, x, y); -+ } -+ start_read(ts); -+ } else { -+ /* Up */ -+ report_touchpanel(ts, 0, 0, 0); -+ irqblock = 0; -+ ts->state = STATE_WAIT_FOR_TOUCH; -+ /* Re-enable pen down interrupt */ -+ enable_irq(ts->irq); -+ } -+} -+ -+static int pen_down(void) -+{ -+ return ( asic3_get_gpio_status_a( &htcuniversal_asic3.dev ) & (1<dev.platform_data; -+ -+ printk("htcuniversal: ts_probe\n"); -+ -+ ts = ts_data = kmalloc (sizeof (*ts), GFP_KERNEL); -+ if (ts == NULL) { -+ printk( KERN_NOTICE "htcuniversal_ts: unable to allocate memory\n" ); -+ return -ENOMEM; -+ } -+ memset (ts, 0, sizeof (*ts)); -+ -+ ts->input = input_allocate_device(); -+ if (ts->input == NULL) { -+ printk( KERN_NOTICE "htcuniversal_ts: unable to allocation touchscreen input\n" ); -+ kfree(ts); -+ return -ENOMEM; -+ } -+ ts->input->evbit[0] = BIT(EV_ABS); -+ ts->input->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); -+ ts->input->absmin[ABS_X] = 0; -+ ts->input->absmax[ABS_X] = 32767; -+ ts->input->absmin[ABS_Y] = 0; -+ ts->input->absmax[ABS_Y] = 32767; -+ ts->input->absmin[ABS_PRESSURE] = 0; -+ ts->input->absmax[ABS_PRESSURE] = 1; -+ -+ ts->input->name = "htcuniversal_ts"; -+ ts->input->phys = "touchscreen/htcuniversal_ts"; -+ ts->input->private = ts; -+ -+ input_register_device(ts->input); -+ -+ ts->timer.function = ts_timer_callback; -+ ts->timer.data = (unsigned long)ts; -+ ts->state = STATE_WAIT_FOR_TOUCH; -+ init_timer (&ts->timer); -+ -+ platform_set_drvdata(dev, ts); -+ -+ ts->port=-1; -+ -+ if (mach) { -+ ts->port = mach->port; -+ ts->clock = mach->clock; -+ ts->pwrbit_X = mach->pwrbit_X; -+ ts->pwrbit_Y = mach->pwrbit_Y; -+ -+ /* static irq */ -+ if (mach->irq) -+ ts->irq = mach->irq; -+ -+ if (mach->pen_down) -+ ts->pen_down=mach->pen_down; -+ } -+ -+ if (ts->port == -1) -+ { -+ printk("tsc2046: your device is not supported by this driver\n"); -+ return -ENODEV; -+ } -+ -+ /* *** Initialize the SSP interface *** */ -+ ssp_init(ts->port, ts->clock); -+ -+ while(!(SSSR_P(ts->port) & SSSR_TNF)) -+ ; -+ SSDR_P(ts->port) = (TSC2046_SAMPLE_X|(ts->pwrbit_X))<<16; -+ -+ for(retval = 0; retval < 100; retval++) { -+ if(SSSR_P(ts->port) & SSSR_RNE) { -+ while(SSSR_P(ts->port) & SSSR_RNE) { -+ (void)SSDR_P(ts->port); -+ } -+ break; -+ } -+ mdelay(1); -+ } -+ -+ if (machine_is_htcuniversal() ) -+ { -+ ts->irq = asic3_irq_base( &htcuniversal_asic3.dev ) + ASIC3_GPIOA_IRQ_BASE + GPIOA_TOUCHSCREEN_N; -+ ts->pen_down=pen_down; -+ } -+ -+ retval = request_irq(ts->irq, pen_isr, IRQF_DISABLED, "tsc2046_ts", ts); -+ if(retval) { -+ printk("Unable to get interrupt\n"); -+ input_unregister_device (ts->input); -+ return -ENODEV; -+ } -+ set_irq_type(ts->irq, IRQ_TYPE_EDGE_FALLING); -+ -+ return 0; -+} -+ -+static int -+ts_remove (struct platform_device *dev) -+{ -+ struct touchscreen_data *ts = platform_get_drvdata(dev); -+ -+ input_unregister_device (ts->input); -+ del_timer_sync (&ts->timer); -+ free_irq (ts->irq, ts); -+ pxa_set_cken(ts->clock, 0); -+ -+ kfree(ts); -+ return 0; -+} -+ -+static int -+ts_suspend (struct platform_device *dev, pm_message_t state) -+{ -+ struct touchscreen_data *ts = platform_get_drvdata(dev); -+ -+ disable_irq(ts->irq); -+ -+ printk("htcuniversal_ts2_suspend: called.\n"); -+ return 0; -+} -+ -+static int -+ts_resume (struct platform_device *dev) -+{ -+ struct touchscreen_data *ts = platform_get_drvdata(dev); -+ -+ ts->state = STATE_WAIT_FOR_TOUCH; -+ ssp_init(ts->port, ts->clock); -+ enable_irq(ts->irq); -+ -+ printk("htcuniversal_ts2_resume: called.\n"); -+ return 0; -+} -+ -+static struct platform_driver ts_driver = { -+ .probe = ts_probe, -+ .remove = ts_remove, -+ .suspend = ts_suspend, -+ .resume = ts_resume, -+ .driver = { -+ .name = "htcuniversal_ts", -+ }, -+}; -+ -+ -+static int -+ts_module_init (void) -+{ -+ printk(KERN_NOTICE "HTC Universal Touch Screen Driver\n"); -+ -+ return platform_driver_register(&ts_driver); -+} -+ -+static void -+ts_module_cleanup (void) -+{ -+ platform_driver_unregister (&ts_driver); -+} -+ -+module_init(ts_module_init); -+module_exit(ts_module_cleanup); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Aric Blumer, SDG Systems, LLC"); -+MODULE_DESCRIPTION("HTC Universal Touch Screen Driver"); -Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,71 @@ -+ -+/* -+ * -+ * htcuniversal_udc.c: -+ * htcuniversal specific code for the pxa27x usb device controller. -+ * -+ * Use consistent with the GNU GPL is permitted. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static void htcuniversal_udc_command(int cmd) -+{ -+ switch (cmd) { -+ case PXA2XX_UDC_CMD_DISCONNECT: -+ asic3_set_gpio_out_b(&htcuniversal_asic3.dev, -+ 1< -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include "leds.h" -+ -+#include -+#include -+#include -+#include -+ -+#ifdef DEBUG -+#define dbg(msg, ...) printk(msg, __VA_ARGS__) -+#else -+#define dbg(msg, ...) -+#endif -+ -+static -+void asic3_leds_set(struct led_classdev *led_cdev, enum led_brightness b) -+{ -+ struct asic3_led *led = container_of(led_cdev, struct asic3_led, -+ led_cdev); -+ struct asic3_leds_machinfo *machinfo = led->machinfo; -+ struct device *asic3_dev = &machinfo->asic3_pdev->dev; -+ -+ dbg("%s:%s %d(%d)-%s %d\n", __FILE__, __FUNCTION__, led->hw_num, -+ led->gpio_num, led->led_cdev.name, b); -+ -+ if (led->hw_num == -1) { -+ asic3_gpio_set_value(asic3_dev, led->gpio_num, b); -+ return; -+ } -+ -+ if (b == LED_OFF) { -+ asic3_set_led(asic3_dev, led->hw_num, 0, 16, 6); -+ asic3_set_gpio_out_c(asic3_dev, led->hw_num, 0); -+ } -+ else { -+ asic3_set_gpio_out_c(asic3_dev, led->hw_num, led->hw_num); -+ #ifdef CONFIG_LEDS_TRIGGER_HWTIMER -+ if (led_cdev->trigger && led_cdev->trigger->is_led_supported && -+ (led_cdev->trigger->is_led_supported(led_cdev) & -+ LED_SUPPORTS_HWTIMER)) { -+ struct hwtimer_data *td = led_cdev->trigger_data; -+ if (!td) return; -+ asic3_set_led(asic3_dev, led->hw_num, td->delay_on/8, -+ (td->delay_on + td->delay_off)/8, 6); -+ } -+ else -+ #endif -+ asic3_set_led(asic3_dev, led->hw_num, 16, 16, 6); -+ } -+ -+ return; -+} -+ -+static -+int asic3_leds_probe(struct platform_device *pdev) -+{ -+ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; -+ struct asic3_led *leds = machinfo->leds; -+ int ret, i = 0; -+ -+ dbg("%s:%s\n", __FILE__, __FUNCTION__); -+ -+ // Turn on clocks early, for the case if trigger would enable -+ // led immediately after led_classdev_register(). -+ asic3_set_clock_cdex(&machinfo->asic3_pdev->dev, -+ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2, -+ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2); -+ -+ for (i = 0; i < machinfo->num_leds; i++) { -+ leds[i].machinfo = machinfo; -+ leds[i].led_cdev.brightness_set = asic3_leds_set; -+ ret = led_classdev_register(&pdev->dev, &leds[i].led_cdev); -+ if (ret) { -+ printk(KERN_ERR "Error: can't register %s led\n", -+ leds[i].led_cdev.name); -+ goto out_err; -+ } -+ } -+ -+ return 0; -+ -+out_err: -+ while (--i >= 0) led_classdev_unregister(&leds[i].led_cdev); -+ -+ asic3_set_clock_cdex(&machinfo->asic3_pdev->dev, -+ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2, -+ 0 | 0 | 0); -+ -+ return ret; -+} -+ -+static -+int asic3_leds_remove(struct platform_device *pdev) -+{ -+ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; -+ struct asic3_led *leds = machinfo->leds; -+ int i = 0; -+ -+ dbg("%s:%s\n", __FILE__, __FUNCTION__); -+ -+ for (i = 0; i < machinfo->num_leds; i++) -+ led_classdev_unregister(&leds[i].led_cdev); -+ -+ asic3_set_clock_cdex(&machinfo->asic3_pdev->dev, -+ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2, -+ 0 | 0 | 0); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_PM -+ -+static -+int asic3_leds_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; -+ struct asic3_led *leds = machinfo->leds; -+ int i = 0; -+ -+ dbg("%s:%s\n", __FILE__, __FUNCTION__); -+ -+ for (i = 0; i < machinfo->num_leds; i++) -+ led_classdev_suspend(&leds[i].led_cdev); -+ -+ return 0; -+} -+ -+static -+int asic3_leds_resume(struct platform_device *pdev) -+{ -+ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; -+ struct asic3_led *leds = machinfo->leds; -+ int i = 0; -+ -+ dbg("%s:%s\n", __FILE__, __FUNCTION__); -+ -+ for (i = 0; i < machinfo->num_leds; i++) -+ led_classdev_resume(&leds[i].led_cdev); -+ -+ return 0; -+} -+ -+#endif -+ -+static -+struct platform_driver asic3_leds_driver = { -+ .probe = asic3_leds_probe, -+ .remove = asic3_leds_remove, -+#ifdef CONFIG_PM -+ .suspend = asic3_leds_suspend, -+ .resume = asic3_leds_resume, -+#endif -+ .driver = { -+ .name = "asic3-leds", -+ }, -+}; -+ -+int asic3_leds_register(void) -+{ -+ dbg("%s:%s\n", __FILE__, __FUNCTION__); -+ return platform_driver_register(&asic3_leds_driver); -+} -+ -+void asic3_leds_unregister(void) -+{ -+ platform_driver_unregister(&asic3_leds_driver); -+ return; -+} -+ -+EXPORT_SYMBOL_GPL(asic3_leds_register); -+EXPORT_SYMBOL_GPL(asic3_leds_unregister); -+ -+MODULE_AUTHOR("Anton Vorontsov "); -+MODULE_DESCRIPTION("HTC ASIC3 LEDs driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.23/drivers/mfd/Kconfig -=================================================================== ---- linux-2.6.23.orig/drivers/mfd/Kconfig 2008-01-20 18:59:38.000000000 +0000 -+++ linux-2.6.23/drivers/mfd/Kconfig 2008-01-20 18:59:46.000000000 +0000 -@@ -21,6 +21,16 @@ config MFD_TSC2101 - help - Support for TI TSC2101 Touchscreen and Audio Codec - -+config HTC_ASIC3 -+ tristate "HTC ASIC3 (iPAQ h1900/h3900/h4000/hx4700/rx3000) support" -+ -+config HTC_ASIC3_DS1WM -+ bool "Support HTC ASIC3 builtin DS1WM block" -+ help -+ Choose Y here if you want to include support for ASIC3's builtin -+ W1 controller. Some devices do not use it, and yet other have -+ separate DS1WM controller. For them, choose N. -+ - endmenu - - menu "Multimedia Capabilities Port drivers" -Index: linux-2.6.23/drivers/mfd/Makefile -=================================================================== ---- linux-2.6.23.orig/drivers/mfd/Makefile 2008-01-20 18:59:38.000000000 +0000 -+++ linux-2.6.23/drivers/mfd/Makefile 2008-01-20 18:59:46.000000000 +0000 -@@ -2,6 +2,8 @@ - # Makefile for multifunction miscellaneous devices - # - -+obj-$(CONFIG_HTC_ASIC3) += asic3_base.o soc-core.o -+ - obj-$(CONFIG_MFD_SM501) += sm501.o - - obj-$(CONFIG_MCP) += mcp-core.o -Index: linux-2.6.23/drivers/mfd/asic3_base.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/mfd/asic3_base.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,1208 @@ -+/* -+ * Driver interface to HTC "ASIC3" -+ * -+ * Copyright 2001 Compaq Computer Corporation. -+ * Copyright 2004-2005 Phil Blundell -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, -+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS -+ * FITNESS FOR ANY PARTICULAR PURPOSE. -+ * -+ * Author: Andrew Christian -+ * -+ * October 2001 -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include "soc-core.h" -+ -+ -+struct asic3_data { -+ void *mapping; -+ unsigned int bus_shift; -+ int irq_base; -+ int irq_nr; -+ -+ u16 irq_bothedge[4]; -+ struct device *dev; -+ -+ struct platform_device *mmc_dev; -+}; -+ -+static DEFINE_SPINLOCK(asic3_gpio_lock); -+ -+static int asic3_remove(struct platform_device *dev); -+ -+static inline unsigned long asic3_address(struct device *dev, -+ unsigned int reg) -+{ -+ struct asic3_data *adata; -+ -+ adata = (struct asic3_data *)dev->driver_data; -+ -+ return (unsigned long)adata->mapping + (reg >> (2 - adata->bus_shift)); -+} -+ -+void asic3_write_register(struct device *dev, unsigned int reg, u32 value) -+{ -+ __raw_writew(value, asic3_address(dev, reg)); -+} -+EXPORT_SYMBOL(asic3_write_register); -+ -+u32 asic3_read_register(struct device *dev, unsigned int reg) -+{ -+ return __raw_readw(asic3_address(dev, reg)); -+} -+EXPORT_SYMBOL(asic3_read_register); -+ -+static inline void __asic3_write_register(struct asic3_data *asic, -+ unsigned int reg, u32 value) -+{ -+ __raw_writew(value, (unsigned long)asic->mapping -+ + (reg >> (2 - asic->bus_shift))); -+} -+ -+static inline u32 __asic3_read_register(struct asic3_data *asic, -+ unsigned int reg) -+{ -+ return __raw_readw((unsigned long)asic->mapping -+ + (reg >> (2 - asic->bus_shift))); -+} -+ -+#define ASIC3_GPIO_FN(get_fn_name, set_fn_name, REG) \ -+u32 get_fn_name(struct device *dev) \ -+{ \ -+ return asic3_read_register(dev, REG); \ -+} \ -+EXPORT_SYMBOL(get_fn_name); \ -+ \ -+void set_fn_name(struct device *dev, u32 bits, u32 val) \ -+{ \ -+ unsigned long flags; \ -+ \ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); \ -+ val |= (asic3_read_register(dev, REG) & ~bits); \ -+ asic3_write_register(dev, REG, val); \ -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); \ -+} \ -+EXPORT_SYMBOL(set_fn_name); -+ -+#define ASIC3_GPIO_REGISTER(ACTION, action, fn, FN) \ -+ ASIC3_GPIO_FN(asic3_get_gpio_ ## action ## _ ## fn , \ -+ asic3_set_gpio_ ## action ## _ ## fn , \ -+ _IPAQ_ASIC3_GPIO_ ## FN ## _Base \ -+ + _IPAQ_ASIC3_GPIO_ ## ACTION ) -+ -+#define ASIC3_GPIO_FUNCTIONS(fn, FN) \ -+ ASIC3_GPIO_REGISTER(Direction, dir, fn, FN) \ -+ ASIC3_GPIO_REGISTER(Out, out, fn, FN) \ -+ ASIC3_GPIO_REGISTER(SleepMask, sleepmask, fn, FN) \ -+ ASIC3_GPIO_REGISTER(SleepOut, sleepout, fn, FN) \ -+ ASIC3_GPIO_REGISTER(BattFaultOut, battfaultout, fn, FN) \ -+ ASIC3_GPIO_REGISTER(AltFunction, alt_fn, fn, FN) \ -+ ASIC3_GPIO_REGISTER(SleepConf, sleepconf, fn, FN) \ -+ ASIC3_GPIO_REGISTER(Status, status, fn, FN) -+ -+#if 0 -+ ASIC3_GPIO_REGISTER(Mask, mask, fn, FN) -+ ASIC3_GPIO_REGISTER(TriggerType, trigtype, fn, FN) -+ ASIC3_GPIO_REGISTER(EdgeTrigger, rising, fn, FN) -+ ASIC3_GPIO_REGISTER(LevelTrigger, triglevel, fn, FN) -+ ASIC3_GPIO_REGISTER(IntStatus, intstatus, fn, FN) -+#endif -+ -+ASIC3_GPIO_FUNCTIONS(a, A) -+ASIC3_GPIO_FUNCTIONS(b, B) -+ASIC3_GPIO_FUNCTIONS(c, C) -+ASIC3_GPIO_FUNCTIONS(d, D) -+ -+int asic3_gpio_get_value(struct device *dev, unsigned gpio) -+{ -+ u32 mask = ASIC3_GPIO_bit(gpio); -+ printk("%s(%d)\n", __FUNCTION__, gpio); -+ switch (gpio >> 4) { -+ case _IPAQ_ASIC3_GPIO_BANK_A: -+ return asic3_get_gpio_status_a(dev) & mask; -+ case _IPAQ_ASIC3_GPIO_BANK_B: -+ return asic3_get_gpio_status_b(dev) & mask; -+ case _IPAQ_ASIC3_GPIO_BANK_C: -+ return asic3_get_gpio_status_c(dev) & mask; -+ case _IPAQ_ASIC3_GPIO_BANK_D: -+ return asic3_get_gpio_status_d(dev) & mask; -+ } -+ -+ printk(KERN_ERR "%s: invalid GPIO value 0x%x", __FUNCTION__, gpio); -+ return 0; -+} -+EXPORT_SYMBOL(asic3_gpio_get_value); -+ -+void asic3_gpio_set_value(struct device *dev, unsigned gpio, int val) -+{ -+ u32 mask = ASIC3_GPIO_bit(gpio); -+ u32 bitval = 0; -+ if (val) bitval = mask; -+ printk("%s(%d, %d)\n", __FUNCTION__, gpio, val); -+ -+ switch (gpio >> 4) { -+ case _IPAQ_ASIC3_GPIO_BANK_A: -+ asic3_set_gpio_out_a(dev, mask, bitval); -+ return; -+ case _IPAQ_ASIC3_GPIO_BANK_B: -+ asic3_set_gpio_out_b(dev, mask, bitval); -+ return; -+ case _IPAQ_ASIC3_GPIO_BANK_C: -+ asic3_set_gpio_out_c(dev, mask, bitval); -+ return; -+ case _IPAQ_ASIC3_GPIO_BANK_D: -+ asic3_set_gpio_out_d(dev, mask, bitval); -+ return; -+ } -+ -+ printk(KERN_ERR "%s: invalid GPIO value 0x%x", __FUNCTION__, gpio); -+} -+EXPORT_SYMBOL(asic3_gpio_set_value); -+ -+int asic3_irq_base(struct device *dev) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ -+ return asic->irq_base; -+} -+EXPORT_SYMBOL(asic3_irq_base); -+ -+static int asic3_gpio_to_irq(struct device *dev, unsigned gpio) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ printk("%s(%d)\n", __FUNCTION__, gpio); -+ -+ return asic->irq_base + gpio; -+} -+ -+void asic3_set_led(struct device *dev, int led_num, int duty_time, -+ int cycle_time, int timebase) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned int led_base; -+ -+ /* it's a macro thing: see #define _IPAQ_ASIC_LED_0_Base for why you -+ * can't substitute led_num in the macros below... -+ */ -+ -+ switch (led_num) { -+ case 0: -+ led_base = _IPAQ_ASIC3_LED_0_Base; -+ break; -+ case 1: -+ led_base = _IPAQ_ASIC3_LED_1_Base; -+ break; -+ case 2: -+ led_base = _IPAQ_ASIC3_LED_2_Base; -+ break; -+ default: -+ printk(KERN_ERR "%s: invalid led number %d", __FUNCTION__, -+ led_num); -+ return; -+ } -+ -+ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_TimeBase, -+ timebase | LED_EN); -+ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_PeriodTime, -+ cycle_time); -+ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_DutyTime, -+ 0); -+ udelay(20); /* asic voodoo - possibly need a whole duty cycle? */ -+ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_DutyTime, -+ duty_time); -+} -+EXPORT_SYMBOL(asic3_set_led); -+ -+void asic3_set_clock_sel(struct device *dev, u32 bits, u32 val) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned long flags; -+ u32 v; -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL)); -+ v = (v & ~bits) | val; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), v); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+EXPORT_SYMBOL(asic3_set_clock_sel); -+ -+void asic3_set_clock_cdex(struct device *dev, u32 bits, u32 val) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned long flags; -+ u32 v; -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX)); -+ v = (v & ~bits) | val; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), v); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+EXPORT_SYMBOL(asic3_set_clock_cdex); -+ -+static void asic3_clock_cdex_enable(struct clk *clk) -+{ -+ struct asic3_data *asic = (struct asic3_data *)clk->parent->ctrlbit; -+ unsigned long flags, val; -+ -+ local_irq_save(flags); -+ -+ val = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX)); -+ val |= clk->ctrlbit; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), val); -+ -+ local_irq_restore(flags); -+} -+ -+static void asic3_clock_cdex_disable(struct clk *clk) -+{ -+ struct asic3_data *asic = (struct asic3_data *)clk->parent->ctrlbit; -+ unsigned long flags, val; -+ -+ local_irq_save(flags); -+ -+ val = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX)); -+ val &= ~clk->ctrlbit; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), val); -+ -+ local_irq_restore(flags); -+} -+ -+/* base clocks */ -+ -+static struct clk clk_g = { -+ .name = "gclk", -+ .rate = 0, -+ .parent = NULL, -+}; -+ -+/* clock definitions */ -+ -+static struct clk asic3_clocks[] = { -+ { -+ .name = "spi", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_SPI, -+ }, -+#ifdef CONFIG_HTC_ASIC3_DS1WM -+ { -+ .name = "ds1wm", -+ .id = -1, -+ .rate = 5000000, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_OWM, -+ }, -+#endif -+ { -+ .name = "pwm0", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_PWM0, -+ }, -+ { -+ .name = "pwm1", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_PWM1, -+ }, -+ { -+ .name = "led0", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_LED0, -+ }, -+ { -+ .name = "led1", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_LED1, -+ }, -+ { -+ .name = "led2", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_LED2, -+ }, -+ { -+ .name = "smbus", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_SMBUS, -+ }, -+ { -+ .name = "ex0", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_EX0, -+ }, -+ { -+ .name = "ex1", -+ .id = -1, -+ .parent = &clk_g, -+ .enable = asic3_clock_cdex_enable, -+ .disable = asic3_clock_cdex_disable, -+ .ctrlbit = CLOCK_CDEX_EX1, -+ }, -+}; -+ -+void asic3_set_extcf_select(struct device *dev, u32 bits, u32 val) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned long flags; -+ u32 v; -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Select)); -+ v = (v & ~bits) | val; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Select), v); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+EXPORT_SYMBOL(asic3_set_extcf_select); -+ -+void asic3_set_extcf_reset(struct device *dev, u32 bits, u32 val) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned long flags; -+ u32 v; -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Reset)); -+ v = (v & ~bits) | val; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Reset), v); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+EXPORT_SYMBOL(asic3_set_extcf_reset); -+ -+void asic3_set_sdhwctrl(struct device *dev, u32 bits, u32 val) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ unsigned long flags; -+ u32 v; -+ -+ spin_lock_irqsave (&asic3_gpio_lock, flags); -+ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(SDHWCTRL, SDConf)); -+ v = (v & ~bits) | val; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(SDHWCTRL, SDConf), v); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+EXPORT_SYMBOL(asic3_set_sdhwctrl); -+ -+ -+#define MAX_ASIC_ISR_LOOPS 20 -+#define _IPAQ_ASIC3_GPIO_Base_INCR \ -+ (_IPAQ_ASIC3_GPIO_B_Base - _IPAQ_ASIC3_GPIO_A_Base) -+ -+static inline void asic3_irq_flip_edge(struct asic3_data *asic, -+ u32 base, int bit) -+{ -+ u16 edge = __asic3_read_register(asic, -+ base + _IPAQ_ASIC3_GPIO_EdgeTrigger); -+ edge ^= bit; -+ __asic3_write_register(asic, -+ base + _IPAQ_ASIC3_GPIO_EdgeTrigger, edge); -+} -+ -+static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc) -+{ -+ int iter; -+ struct asic3_data *asic; -+ -+ /* Acknowledge the parrent (i.e. CPU's) IRQ */ -+ desc->chip->ack(irq); -+ -+ asic = desc->handler_data; -+ -+ /* printk( KERN_NOTICE "asic3_irq_demux: irq=%d\n", irq ); */ -+ for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) { -+ u32 status; -+ int bank; -+ -+ status = __asic3_read_register(asic, -+ IPAQ_ASIC3_OFFSET(INTR, PIntStat)); -+ /* Check all ten register bits */ -+ if ((status & 0x3ff) == 0) -+ break; -+ -+ /* Handle GPIO IRQs */ -+ for (bank = 0; bank < 4; bank++) { -+ if (status & (1 << bank)) { -+ unsigned long base, i, istat; -+ -+ base = _IPAQ_ASIC3_GPIO_A_Base -+ + bank * _IPAQ_ASIC3_GPIO_Base_INCR; -+ istat = __asic3_read_register(asic, -+ base + _IPAQ_ASIC3_GPIO_IntStatus); -+ /* IntStatus is write 0 to clear */ -+ /* XXX could miss interrupts! */ -+ __asic3_write_register(asic, -+ base + _IPAQ_ASIC3_GPIO_IntStatus, 0); -+ -+ for (i = 0; i < 16; i++) { -+ int bit = (1 << i); -+ unsigned int irqnr; -+ if (!(istat & bit)) -+ continue; -+ -+ irqnr = asic->irq_base -+ + (16 * bank) + i; -+ desc = irq_desc + irqnr; -+ desc->handle_irq(irqnr, desc); -+ if (asic->irq_bothedge[bank] & bit) { -+ asic3_irq_flip_edge(asic, base, -+ bit); -+ } -+ } -+ } -+ } -+ -+ /* Handle remaining IRQs in the status register */ -+ { -+ int i; -+ -+ for (i = ASIC3_LED0_IRQ; i <= ASIC3_OWM_IRQ; i++) { -+ /* They start at bit 4 and go up */ -+ if (status & (1 << (i - ASIC3_LED0_IRQ + 4))) { -+ desc = irq_desc + asic->irq_base + i; -+ desc->handle_irq(asic->irq_base + i, -+ desc); -+ } -+ } -+ } -+ -+ } -+ -+ if (iter >= MAX_ASIC_ISR_LOOPS) -+ printk(KERN_ERR "%s: interrupt processing overrun\n", -+ __FUNCTION__); -+} -+ -+static inline int asic3_irq_to_bank(struct asic3_data *asic, int irq) -+{ -+ int n; -+ -+ n = (irq - asic->irq_base) >> 4; -+ -+ return (n * (_IPAQ_ASIC3_GPIO_B_Base - _IPAQ_ASIC3_GPIO_A_Base)); -+} -+ -+static inline int asic3_irq_to_index(struct asic3_data *asic, int irq) -+{ -+ return (irq - asic->irq_base) & 15; -+} -+ -+static void asic3_mask_gpio_irq(unsigned int irq) -+{ -+ struct asic3_data *asic = get_irq_chip_data(irq); -+ u32 val, bank, index; -+ unsigned long flags; -+ -+ bank = asic3_irq_to_bank(asic, irq); -+ index = asic3_irq_to_index(asic, irq); -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ val = __asic3_read_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask); -+ val |= 1 << index; -+ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask, val); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+ -+static void asic3_mask_irq(unsigned int irq) -+{ -+ struct asic3_data *asic = get_irq_chip_data(irq); -+ int regval; -+ -+ if (irq < ASIC3_NR_GPIO_IRQS) { -+ printk(KERN_ERR "asic3_base: gpio mask attempt, irq %d\n", -+ irq); -+ return; -+ } -+ -+ regval = __asic3_read_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask); -+ -+ switch (irq - asic->irq_base) { -+ case ASIC3_LED0_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK0); -+ break; -+ case ASIC3_LED1_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK1); -+ break; -+ case ASIC3_LED2_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK2); -+ break; -+ case ASIC3_SPI_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK3); -+ break; -+ case ASIC3_SMBUS_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK4); -+ break; -+ case ASIC3_OWM_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval & ~ASIC3_INTMASK_MASK5); -+ break; -+ default: -+ printk(KERN_ERR "asic3_base: bad non-gpio irq %d\n", irq); -+ break; -+ } -+} -+ -+static void asic3_unmask_gpio_irq(unsigned int irq) -+{ -+ struct asic3_data *asic = get_irq_chip_data(irq); -+ u32 val, bank, index; -+ unsigned long flags; -+ -+ bank = asic3_irq_to_bank(asic, irq); -+ index = asic3_irq_to_index(asic, irq); -+ -+ spin_lock_irqsave(&asic3_gpio_lock, flags); -+ val = __asic3_read_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask); -+ val &= ~(1 << index); -+ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask, val); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+} -+ -+static void asic3_unmask_irq(unsigned int irq) -+{ -+ struct asic3_data *asic = get_irq_chip_data(irq); -+ int regval; -+ -+ if (irq < ASIC3_NR_GPIO_IRQS) { -+ printk(KERN_ERR "asic3_base: gpio unmask attempt, irq %d\n", -+ irq); -+ return; -+ } -+ -+ regval = __asic3_read_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask); -+ -+ switch (irq - asic->irq_base) { -+ case ASIC3_LED0_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK0); -+ break; -+ case ASIC3_LED1_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK1); -+ break; -+ case ASIC3_LED2_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK2); -+ break; -+ case ASIC3_SPI_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK3); -+ break; -+ case ASIC3_SMBUS_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK4); -+ break; -+ case ASIC3_OWM_IRQ: -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, -+ regval | ASIC3_INTMASK_MASK5); -+ break; -+ default: -+ printk(KERN_ERR "asic3_base: bad non-gpio irq %d\n", irq); -+ break; -+ } -+} -+ -+static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) -+{ -+ struct asic3_data *asic = get_irq_chip_data(irq); -+ u32 bank, index; -+ unsigned long flags; -+ u16 trigger, level, edge, bit; -+ -+ bank = asic3_irq_to_bank(asic, irq); -+ index = asic3_irq_to_index(asic, irq); -+ bit = 1<irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit; -+ -+ if (type == IRQT_RISING) { -+ trigger |= bit; -+ edge |= bit; -+ } else if (type == IRQT_FALLING) { -+ trigger |= bit; -+ edge &= ~bit; -+ } else if (type == IRQT_BOTHEDGE) { -+ trigger |= bit; -+ if (asic3_gpio_get_value(asic->dev, irq - asic->irq_base)) -+ edge &= ~bit; -+ else -+ edge |= bit; -+ asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit; -+ } else if (type == IRQT_LOW) { -+ trigger &= ~bit; -+ level &= ~bit; -+ } else if (type == IRQT_HIGH) { -+ trigger &= ~bit; -+ level |= bit; -+ } else { -+ /* -+ * if type == IRQT_NOEDGE, we should mask interrupts, but -+ * be careful to not unmask them if mask was also called. -+ * Probably need internal state for mask. -+ */ -+ printk(KERN_NOTICE "asic3: irq type not changed.\n"); -+ } -+ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_LevelTrigger, -+ level); -+ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_EdgeTrigger, -+ edge); -+ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_TriggerType, -+ trigger); -+ spin_unlock_irqrestore(&asic3_gpio_lock, flags); -+ return 0; -+} -+ -+static struct irq_chip asic3_gpio_irq_chip = { -+ .name = "ASIC3-GPIO", -+ .ack = asic3_mask_gpio_irq, -+ .mask = asic3_mask_gpio_irq, -+ .unmask = asic3_unmask_gpio_irq, -+ .set_type = asic3_gpio_irq_type, -+}; -+ -+static struct irq_chip asic3_irq_chip = { -+ .name = "ASIC3", -+ .ack = asic3_mask_irq, -+ .mask = asic3_mask_irq, -+ .unmask = asic3_unmask_irq, -+}; -+ -+static void asic3_release(struct device *dev) -+{ -+ struct platform_device *sdev = to_platform_device(dev); -+ -+ kfree(sdev->resource); -+ kfree(sdev); -+} -+ -+int asic3_register_mmc(struct device *dev) -+{ -+ struct platform_device *sdev = kzalloc(sizeof(*sdev), GFP_KERNEL); -+ struct tmio_mmc_hwconfig *mmc_config = kmalloc(sizeof(*mmc_config), -+ GFP_KERNEL); -+ struct platform_device *pdev = to_platform_device(dev); -+ struct asic3_data *asic = dev->driver_data; -+ struct asic3_platform_data *asic3_pdata = dev->platform_data; -+ struct resource *res; -+ int rc; -+ -+ if (sdev == NULL || mmc_config == NULL) -+ return -ENOMEM; -+ -+ if (asic3_pdata->tmio_mmc_hwconfig) { -+ memcpy(mmc_config, asic3_pdata->tmio_mmc_hwconfig, -+ sizeof(*mmc_config)); -+ } else { -+ memset(mmc_config, 0, sizeof(*mmc_config)); -+ } -+ mmc_config->address_shift = asic->bus_shift; -+ -+ sdev->id = -1; -+ sdev->name = "asic3_mmc"; -+ sdev->dev.parent = dev; -+ sdev->num_resources = 2; -+ sdev->dev.platform_data = mmc_config; -+ sdev->dev.release = asic3_release; -+ -+ res = kzalloc(sdev->num_resources * sizeof(struct resource), -+ GFP_KERNEL); -+ if (res == NULL) { -+ kfree(sdev); -+ kfree(mmc_config); -+ return -ENOMEM; -+ } -+ sdev->resource = res; -+ -+ res[0].start = pdev->resource[2].start; -+ res[0].end = pdev->resource[2].end; -+ res[0].flags = IORESOURCE_MEM; -+ res[1].start = res[1].end = pdev->resource[3].start; -+ res[1].flags = IORESOURCE_IRQ; -+ -+ rc = platform_device_register(sdev); -+ if (rc) { -+ printk(KERN_ERR "asic3_base: " -+ "Could not register asic3_mmc device\n"); -+ kfree(res); -+ kfree(sdev); -+ return rc; -+ } -+ -+ asic->mmc_dev = sdev; -+ -+ return 0; -+} -+EXPORT_SYMBOL(asic3_register_mmc); -+ -+int asic3_unregister_mmc(struct device *dev) -+{ -+ struct asic3_data *asic = dev->driver_data; -+ platform_device_unregister(asic->mmc_dev); -+ asic->mmc_dev = 0; -+ -+ return 0; -+} -+EXPORT_SYMBOL(asic3_unregister_mmc); -+ -+#ifdef CONFIG_HTC_ASIC3_DS1WM -+/* -+ * DS1WM subdevice -+ */ -+ -+static void asic3_ds1wm_enable(struct platform_device *ds1wm_dev) -+{ -+ struct device *dev = ds1wm_dev->dev.parent; -+ -+ /* Turn on external clocks and the OWM clock */ -+ asic3_set_clock_cdex(dev, -+ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM, -+ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM); -+ -+ mdelay(1); -+ -+ asic3_set_extcf_reset(dev, ASIC3_EXTCF_OWM_RESET, -+ ASIC3_EXTCF_OWM_RESET); -+ mdelay(1); -+ asic3_set_extcf_reset(dev, ASIC3_EXTCF_OWM_RESET, 0); -+ mdelay(1); -+ -+ /* Clear OWM_SMB, set OWM_EN */ -+ asic3_set_extcf_select(dev, -+ ASIC3_EXTCF_OWM_SMB | ASIC3_EXTCF_OWM_EN, -+ 0 | ASIC3_EXTCF_OWM_EN); -+ -+ mdelay(1); -+} -+ -+static void asic3_ds1wm_disable(struct platform_device *ds1wm_dev) -+{ -+ struct device *dev = ds1wm_dev->dev.parent; -+ -+ asic3_set_extcf_select(dev, -+ ASIC3_EXTCF_OWM_SMB | ASIC3_EXTCF_OWM_EN, -+ 0 | 0); -+ -+ asic3_set_clock_cdex(dev, -+ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM, -+ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | 0); -+} -+ -+ -+static struct resource asic3_ds1wm_resources[] = { -+ { -+ .start = _IPAQ_ASIC3_OWM_Base, -+ .end = _IPAQ_ASIC3_OWM_Base + 0x14 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = ASIC3_OWM_IRQ, -+ .end = ASIC3_OWM_IRQ, -+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | -+ IORESOURCE_IRQ_SOC_SUBDEVICE, -+ }, -+}; -+ -+static struct ds1wm_platform_data ds1wm_pd = { -+ .enable = asic3_ds1wm_enable, -+ .disable = asic3_ds1wm_disable, -+}; -+#endif -+ -+static struct soc_device_data asic3_blocks[] = { -+#ifdef CONFIG_HTC_ASIC3_DS1WM -+ { -+ .name = "ds1wm", -+ .res = asic3_ds1wm_resources, -+ .num_resources = ARRAY_SIZE(asic3_ds1wm_resources), -+ .hwconfig = &ds1wm_pd, -+ }, -+#endif -+}; -+ -+static int asic3_probe(struct platform_device *pdev) -+{ -+ struct asic3_platform_data *pdata = pdev->dev.platform_data; -+ struct asic3_data *asic; -+ struct device *dev = &pdev->dev; -+ unsigned long clksel; -+ int i, rc; -+ -+ asic = kzalloc(sizeof(struct asic3_data), GFP_KERNEL); -+ if (!asic) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, asic); -+ asic->dev = &pdev->dev; -+ -+ asic->mapping = ioremap(pdev->resource[0].start, IPAQ_ASIC3_MAP_SIZE); -+ if (!asic->mapping) { -+ printk(KERN_ERR "asic3: couldn't ioremap ASIC3\n"); -+ kfree (asic); -+ return -ENOMEM; -+ } -+ -+ if (pdata && pdata->bus_shift) -+ asic->bus_shift = pdata->bus_shift; -+ else -+ asic->bus_shift = 2; -+ -+ /* XXX: should get correct SD clock values from pdata struct */ -+ clksel = 0; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), clksel); -+ -+ /* Register ASIC3's clocks. */ -+ clk_g.ctrlbit = (int)asic; -+ -+ if (clk_register(&clk_g) < 0) -+ printk(KERN_ERR "asic3: failed to register ASIC3 gclk\n"); -+ -+ for (i = 0; i < ARRAY_SIZE(asic3_clocks); i++) { -+ rc = clk_register(&asic3_clocks[i]); -+ if (rc < 0) -+ printk(KERN_ERR "asic3: " -+ "failed to register clock %s (%d)\n", -+ asic3_clocks[i].name, rc); -+ } -+ -+ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(A, Mask), 0xffff); -+ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(B, Mask), 0xffff); -+ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(C, Mask), 0xffff); -+ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(D, Mask), 0xffff); -+ -+ asic3_set_gpio_sleepmask_a(dev, 0xffff, 0xffff); -+ asic3_set_gpio_sleepmask_b(dev, 0xffff, 0xffff); -+ asic3_set_gpio_sleepmask_c(dev, 0xffff, 0xffff); -+ asic3_set_gpio_sleepmask_d(dev, 0xffff, 0xffff); -+ -+ if (pdata) { -+ asic3_set_gpio_out_a(dev, 0xffff, pdata->gpio_a.init); -+ asic3_set_gpio_out_b(dev, 0xffff, pdata->gpio_b.init); -+ asic3_set_gpio_out_c(dev, 0xffff, pdata->gpio_c.init); -+ asic3_set_gpio_out_d(dev, 0xffff, pdata->gpio_d.init); -+ -+ asic3_set_gpio_dir_a(dev, 0xffff, pdata->gpio_a.dir); -+ asic3_set_gpio_dir_b(dev, 0xffff, pdata->gpio_b.dir); -+ asic3_set_gpio_dir_c(dev, 0xffff, pdata->gpio_c.dir); -+ asic3_set_gpio_dir_d(dev, 0xffff, pdata->gpio_d.dir); -+ -+ asic3_set_gpio_sleepmask_a(dev, 0xffff, -+ pdata->gpio_a.sleep_mask); -+ asic3_set_gpio_sleepmask_b(dev, 0xffff, -+ pdata->gpio_b.sleep_mask); -+ asic3_set_gpio_sleepmask_c(dev, 0xffff, -+ pdata->gpio_c.sleep_mask); -+ asic3_set_gpio_sleepmask_d(dev, 0xffff, -+ pdata->gpio_d.sleep_mask); -+ -+ asic3_set_gpio_sleepout_a(dev, 0xffff, -+ pdata->gpio_a.sleep_out); -+ asic3_set_gpio_sleepout_b(dev, 0xffff, -+ pdata->gpio_b.sleep_out); -+ asic3_set_gpio_sleepout_c(dev, 0xffff, -+ pdata->gpio_c.sleep_out); -+ asic3_set_gpio_sleepout_d(dev, 0xffff, -+ pdata->gpio_d.sleep_out); -+ -+ asic3_set_gpio_battfaultout_a(dev, 0xffff, -+ pdata->gpio_a.batt_fault_out); -+ asic3_set_gpio_battfaultout_b(dev, 0xffff, -+ pdata->gpio_b.batt_fault_out); -+ asic3_set_gpio_battfaultout_c(dev, 0xffff, -+ pdata->gpio_c.batt_fault_out); -+ asic3_set_gpio_battfaultout_d(dev, 0xffff, -+ pdata->gpio_d.batt_fault_out); -+ -+ asic3_set_gpio_sleepconf_a(dev, 0xffff, -+ pdata->gpio_a.sleep_conf); -+ asic3_set_gpio_sleepconf_b(dev, 0xffff, -+ pdata->gpio_b.sleep_conf); -+ asic3_set_gpio_sleepconf_c(dev, 0xffff, -+ pdata->gpio_c.sleep_conf); -+ asic3_set_gpio_sleepconf_d(dev, 0xffff, -+ pdata->gpio_d.sleep_conf); -+ -+ asic3_set_gpio_alt_fn_a(dev, 0xffff, -+ pdata->gpio_a.alt_function); -+ asic3_set_gpio_alt_fn_b(dev, 0xffff, -+ pdata->gpio_b.alt_function); -+ asic3_set_gpio_alt_fn_c(dev, 0xffff, -+ pdata->gpio_c.alt_function); -+ asic3_set_gpio_alt_fn_d(dev, 0xffff, -+ pdata->gpio_d.alt_function); -+ } -+ -+ asic->irq_nr = -1; -+ asic->irq_base = -1; -+ -+ if (pdev->num_resources > 1) -+ asic->irq_nr = pdev->resource[1].start; -+ -+ if (asic->irq_nr != -1) { -+ unsigned int i; -+ -+ if (!pdata->irq_base) { -+ printk(KERN_ERR "asic3: IRQ base not specified\n"); -+ asic3_remove(pdev); -+ return -EINVAL; -+ } -+ -+ asic->irq_base = pdata->irq_base; -+ -+ /* turn on clock to IRQ controller */ -+ clksel |= CLOCK_SEL_CX; -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), -+ clksel); -+ -+ printk(KERN_INFO "asic3: using irq %d-%d on irq %d\n", -+ asic->irq_base, asic->irq_base + ASIC3_NR_IRQS - 1, -+ asic->irq_nr); -+ -+ for (i = 0 ; i < ASIC3_NR_IRQS ; i++) { -+ int irq = i + asic->irq_base; -+ if (i < ASIC3_NR_GPIO_IRQS) { -+ set_irq_chip(irq, &asic3_gpio_irq_chip); -+ set_irq_chip_data(irq, asic); -+ set_irq_handler(irq, handle_level_irq); -+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); -+ } else { -+ /* The remaining IRQs are not GPIO */ -+ set_irq_chip(irq, &asic3_irq_chip); -+ set_irq_chip_data(irq, asic); -+ set_irq_handler(irq, handle_level_irq); -+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); -+ } -+ } -+ -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), -+ ASIC3_INTMASK_GINTMASK); -+ -+ set_irq_chained_handler(asic->irq_nr, asic3_irq_demux); -+ set_irq_type(asic->irq_nr, IRQT_RISING); -+ set_irq_data(asic->irq_nr, asic); -+ } -+ -+#ifdef CONFIG_HTC_ASIC3_DS1WM -+ ds1wm_pd.bus_shift = asic->bus_shift; -+#endif -+ -+ pdata->gpiodev_ops.get = asic3_gpio_get_value; -+ pdata->gpiodev_ops.set = asic3_gpio_set_value; -+ pdata->gpiodev_ops.to_irq = asic3_gpio_to_irq; -+ -+ soc_add_devices(pdev, asic3_blocks, ARRAY_SIZE(asic3_blocks), -+ &pdev->resource[0], -+ asic->bus_shift - ASIC3_DEFAULT_ADDR_SHIFT, -+ asic->irq_base); -+ -+ if (pdev->num_resources > 2) { -+ int rc; -+ rc = asic3_register_mmc(dev); -+ if (rc) { -+ asic3_remove(pdev); -+ return rc; -+ } -+ } -+ -+ if (pdata && pdata->num_child_platform_devs != 0) -+ platform_add_devices(pdata->child_platform_devs, -+ pdata->num_child_platform_devs); -+ -+ return 0; -+} -+ -+static int asic3_remove(struct platform_device *pdev) -+{ -+ struct asic3_platform_data *pdata = pdev->dev.platform_data; -+ struct asic3_data *asic = platform_get_drvdata(pdev); -+ int i; -+ -+ if (pdata && pdata->num_child_platform_devs != 0) { -+ for (i = 0; i < pdata->num_child_platform_devs; i++) { -+ platform_device_unregister( -+ pdata->child_platform_devs[i]); -+ } -+ } -+ -+ if (asic->irq_nr != -1) { -+ unsigned int i; -+ -+ for (i = 0 ; i < ASIC3_NR_IRQS ; i++) { -+ int irq = i + asic->irq_base; -+ set_irq_flags(irq, 0); -+ set_irq_handler (irq, NULL); -+ set_irq_chip (irq, NULL); -+ set_irq_chip_data(irq, NULL); -+ } -+ -+ set_irq_chained_handler(asic->irq_nr, NULL); -+ } -+ -+ if (asic->mmc_dev) -+ asic3_unregister_mmc(&pdev->dev); -+ -+ for (i = 0; i < ARRAY_SIZE(asic3_clocks); i++) -+ clk_unregister(&asic3_clocks[i]); -+ clk_unregister(&clk_g); -+ -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), 0); -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), 0); -+ -+ iounmap(asic->mapping); -+ -+ kfree(asic); -+ -+ return 0; -+} -+ -+static void asic3_shutdown(struct platform_device *pdev) -+{ -+} -+ -+#define ASIC3_SUSPEND_CDEX_MASK \ -+ (CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2) -+static unsigned short suspend_cdex; -+ -+static int asic3_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct asic3_data *asic = platform_get_drvdata(pdev); -+ suspend_cdex = __asic3_read_register(asic, -+ _IPAQ_ASIC3_CLOCK_Base + _IPAQ_ASIC3_CLOCK_CDEX); -+ /* The LEDs are still active during suspend */ -+ __asic3_write_register(asic, -+ _IPAQ_ASIC3_CLOCK_Base + _IPAQ_ASIC3_CLOCK_CDEX, -+ suspend_cdex & ASIC3_SUSPEND_CDEX_MASK); -+ return 0; -+} -+ -+static int asic3_resume(struct platform_device *pdev) -+{ -+ struct asic3_data *asic = platform_get_drvdata(pdev); -+ unsigned short intmask; -+ -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), -+ suspend_cdex); -+ -+ if (asic->irq_nr != -1) { -+ /* Toggle the interrupt mask to try to get ASIC3 to show -+ * the CPU an interrupt edge. For more details see the -+ * kernel-discuss thread around 13 June 2005 with the -+ * subject "asic3 suspend / resume". */ -+ intmask = __asic3_read_register(asic, -+ IPAQ_ASIC3_OFFSET(INTR, IntMask)); -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), -+ intmask & ~ASIC3_INTMASK_GINTMASK); -+ mdelay(1); -+ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), -+ intmask | ASIC3_INTMASK_GINTMASK); -+ } -+ -+ return 0; -+} -+ -+static struct platform_driver asic3_device_driver = { -+ .driver = { -+ .name = "asic3", -+ }, -+ .probe = asic3_probe, -+ .remove = asic3_remove, -+ .suspend = asic3_suspend, -+ .resume = asic3_resume, -+ .shutdown = asic3_shutdown, -+}; -+ -+static int __init asic3_base_init(void) -+{ -+ int retval = 0; -+ retval = platform_driver_register(&asic3_device_driver); -+ return retval; -+} -+ -+static void __exit asic3_base_exit(void) -+{ -+ platform_driver_unregister(&asic3_device_driver); -+} -+ -+#ifdef MODULE -+module_init(asic3_base_init); -+#else /* start early for dependencies */ -+subsys_initcall(asic3_base_init); -+#endif -+module_exit(asic3_base_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Phil Blundell "); -+MODULE_DESCRIPTION("Core driver for HTC ASIC3"); -+MODULE_SUPPORTED_DEVICE("asic3"); -Index: linux-2.6.23/drivers/mfd/soc-core.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/mfd/soc-core.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,106 @@ -+/* -+ * drivers/soc/soc-core.c -+ * -+ * core SoC support -+ * Copyright (c) 2006 Ian Molton -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This file contains functionality used by many SoC type devices. -+ * -+ * Created: 2006-11-28 -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include "soc-core.h" -+ -+void soc_free_devices(struct platform_device *devices, int nr_devs) -+{ -+ struct platform_device *dev = devices; -+ int i; -+ -+ for (i = 0; i < nr_devs; i++) { -+ struct resource *res = dev->resource; -+ platform_device_unregister(dev++); -+ kfree(res); -+ } -+ kfree(devices); -+} -+EXPORT_SYMBOL_GPL(soc_free_devices); -+ -+#define SIGNED_SHIFT(val, shift) ((shift) >= 0 ? ((val) << (shift)) : ((val) >> -(shift))) -+ -+struct platform_device *soc_add_devices(struct platform_device *dev, -+ struct soc_device_data *soc, int nr_devs, -+ struct resource *mem, -+ int relative_addr_shift, int irq_base) -+{ -+ struct platform_device *devices; -+ int i, r, base; -+ -+ devices = kzalloc(nr_devs * sizeof(struct platform_device), GFP_KERNEL); -+ if (!devices) -+ return NULL; -+ -+ for (i = 0; i < nr_devs; i++) { -+ struct platform_device *sdev = &devices[i]; -+ struct soc_device_data *blk = &soc[i]; -+ struct resource *res; -+ -+ sdev->id = -1; -+ sdev->name = blk->name; -+ -+ sdev->dev.parent = &dev->dev; -+ sdev->dev.platform_data = (void *)blk->hwconfig; -+ sdev->num_resources = blk->num_resources; -+ -+ /* Allocate space for the subdevice resources */ -+ res = kzalloc (blk->num_resources * sizeof (struct resource), GFP_KERNEL); -+ if (!res) -+ goto fail; -+ -+ for (r = 0 ; r < blk->num_resources ; r++) { -+ res[r].name = blk->res[r].name; // Fixme - should copy -+ -+ /* Find out base to use */ -+ base = 0; -+ if (blk->res[r].flags & IORESOURCE_MEM) { -+ base = mem->start; -+ } else if ((blk->res[r].flags & IORESOURCE_IRQ) && -+ (blk->res[r].flags & IORESOURCE_IRQ_SOC_SUBDEVICE)) { -+ base = irq_base; -+ } -+ -+ /* Adjust resource */ -+ if (blk->res[r].flags & IORESOURCE_MEM) { -+ res[r].parent = mem; -+ res[r].start = base + SIGNED_SHIFT(blk->res[r].start, relative_addr_shift); -+ res[r].end = base + SIGNED_SHIFT(blk->res[r].end, relative_addr_shift); -+ } else { -+ res[r].start = base + blk->res[r].start; -+ res[r].end = base + blk->res[r].end; -+ } -+ res[r].flags = blk->res[r].flags; -+ } -+ -+ sdev->resource = res; -+ if (platform_device_register(sdev)) { -+ kfree(res); -+ goto fail; -+ } -+ -+ printk(KERN_INFO "SoC: registering %s\n", blk->name); -+ } -+ return devices; -+ -+fail: -+ soc_free_devices(devices, i + 1); -+ return NULL; -+} -+EXPORT_SYMBOL_GPL(soc_add_devices); -Index: linux-2.6.23/drivers/mfd/soc-core.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/mfd/soc-core.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,30 @@ -+/* -+ * drivers/soc/soc-core.h -+ * -+ * core SoC support -+ * Copyright (c) 2006 Ian Molton -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This file contains prototypes for the functions in soc-core.c -+ * -+ * Created: 2006-11-28 -+ * -+ */ -+ -+struct soc_device_data { -+ char *name; -+ struct resource *res; -+ int num_resources; -+ void *hwconfig; /* platform_data to pass to the subdevice */ -+}; -+ -+struct platform_device *soc_add_devices(struct platform_device *dev, -+ struct soc_device_data *soc, int n_devs, -+ struct resource *mem, -+ int relative_addr_shift, int irq_base); -+ -+void soc_free_devices(struct platform_device *devices, int nr_devs); -+ -Index: linux-2.6.23/include/asm-arm/arch-pxa/clock.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/arch-pxa/clock.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,27 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/clock.h -+ * -+ * Copyright (C) 2006 Erik Hovland -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+struct clk { -+ struct list_head node; -+ struct module *owner; -+ struct clk *parent; -+ const char *name; -+ int id; -+ unsigned int enabled; -+ unsigned long rate; -+ unsigned long ctrlbit; -+ -+ void (*enable)(struct clk *); -+ void (*disable)(struct clk *); -+}; -+ -+ -+extern int clk_register(struct clk *clk); -+extern void clk_unregister(struct clk *clk); -Index: linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-asic.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-asic.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,213 @@ -+/* -+ * include/asm/arm/arch-pxa/htcuniversal-asic.h -+ * -+ * Authors: Giuseppe Zompatori -+ * -+ * based on previews work, see below: -+ * -+ * include/asm/arm/arch-pxa/hx4700-asic.h -+ * Copyright (c) 2004 SDG Systems, LLC -+ * -+ */ -+ -+#ifndef _HTCUNIVERSAL_ASIC_H_ -+#define _HTCUNIVERSAL_ASIC_H_ -+ -+#include -+ -+/* ASIC3 */ -+ -+#define HTCUNIVERSAL_ASIC3_GPIO_PHYS PXA_CS4_PHYS -+#define HTCUNIVERSAL_ASIC3_MMC_PHYS PXA_CS3_PHYS -+ -+/* TODO: some information is missing here */ -+ -+/* ASIC3 GPIO A bank */ -+ -+#define GPIOA_I2C_EN 0 /* Output */ -+#define GPIOA_SPK_PWR1_ON 1 /* Output */ -+#define GPIOA_AUDIO_PWR_ON 2 /* Output */ -+#define GPIOA_EARPHONE_PWR_ON 3 /* Output */ -+ -+#define GPIOA_UNKNOWN4 4 /* Output */ -+#define GPIOA_BUTTON_BACKLIGHT_N 5 /* Input */ -+#define GPIOA_SPK_PWR2_ON 6 /* Output */ -+#define GPIOA_BUTTON_RECORD_N 7 /* Input */ -+ -+#define GPIOA_BUTTON_CAMERA_N 8 /* Input */ -+#define GPIOA_UNKNOWN9 9 /* Output */ -+#define GPIOA_FLASHLIGHT 10 /* Output */ -+#define GPIOA_COVER_ROTATE_N 11 /* Input */ -+ -+#define GPIOA_TOUCHSCREEN_N 12 /* Input */ -+#define GPIOA_VOL_UP_N 13 /* Input */ -+#define GPIOA_VOL_DOWN_N 14 /* Input */ -+#define GPIOA_LCD_PWR5_ON 15 /* Output */ -+ -+/* ASIC3 GPIO B bank */ -+ -+#define GPIOB_BB_READY 0 /* Input */ -+#define GPIOB_CODEC_PDN 1 /* Output */ -+#define GPIOB_UNKNOWN2 2 /* Input */ -+#define GPIOB_BB_UNKNOWN3 3 /* Input */ -+ -+#define GPIOB_BT_IRQ 4 /* Input */ -+#define GPIOB_CLAMSHELL_N 5 /* Input */ -+#define GPIOB_LCD_PWR3_ON 6 /* Output */ -+#define GPIOB_BB_ALERT 7 /* Input */ -+ -+#define GPIOB_BB_RESET2 8 /* Output */ -+#define GPIOB_EARPHONE_N 9 /* Input */ -+#define GPIOB_MICRECORD_N 10 /* Input */ -+#define GPIOB_NIGHT_SENSOR 11 /* Input */ -+ -+#define GPIOB_UMTS_DCD 12 /* Input */ -+#define GPIOB_UNKNOWN13 13 /* Input */ -+#define GPIOB_CHARGE_EN 14 /* Output */ -+#define GPIOB_USB_PUEN 15 /* Output */ -+ -+/* ASIC3 GPIO C bank */ -+ -+#define GPIOC_LED_BTWIFI 0 /* Output */ -+#define GPIOC_LED_RED 1 /* Output */ -+#define GPIOC_LED_GREEN 2 /* Output */ -+#define GPIOC_BOARDID3 3 /* Input */ -+ -+#define GPIOC_WIFI_IRQ_N 4 /* Input */ -+#define GPIOC_WIFI_RESET 5 /* Output */ -+#define GPIOC_WIFI_PWR1_ON 6 /* Output */ -+#define GPIOC_BT_RESET 7 /* Output */ -+ -+#define GPIOC_UNKNOWN8 8 /* Output */ -+#define GPIOC_LCD_PWR1_ON 9 /* Output */ -+#define GPIOC_LCD_PWR2_ON 10 /* Output */ -+#define GPIOC_BOARDID2 11 /* Input */ -+ -+#define GPIOC_BOARDID1 12 /* Input */ -+#define GPIOC_BOARDID0 13 /* Input */ -+#define GPIOC_BT_PWR_ON 14 /* Output */ -+#define GPIOC_CHARGE_ON 15 /* Output */ -+ -+/* ASIC3 GPIO D bank */ -+ -+#define GPIOD_KEY_OK_N 0 /* Input */ -+#define GPIOD_KEY_RIGHT_N 1 /* Input */ -+#define GPIOD_KEY_LEFT_N 2 /* Input */ -+#define GPIOD_KEY_DOWN_N 3 /* Input */ -+ -+#define GPIOD_KEY_UP_N 4 /* Input */ -+#define GPIOD_SDIO_DET 5 /* Input */ -+#define GPIOD_WIFI_PWR2_ON 6 /* Output */ -+#define GPIOD_HW_REBOOT 7 /* Output */ -+ -+#define GPIOD_BB_RESET1 8 /* Output */ -+#define GPIOD_UNKNOWN9 9 /* Output */ -+#define GPIOD_VIBRA_PWR_ON 10 /* Output */ -+#define GPIOD_WIFI_PWR3_ON 11 /* Output */ -+ -+#define GPIOD_FL_PWR_ON 12 /* Output */ -+#define GPIOD_LCD_PWR4_ON 13 /* Output */ -+#define GPIOD_BL_KEYP_PWR_ON 14 /* Output */ -+#define GPIOD_BL_KEYB_PWR_ON 15 /* Output */ -+ -+extern struct platform_device htcuniversal_asic3; -+ -+/* ASIC3 GPIO A bank */ -+ -+#define GPIO_I2C_EN 0*16+GPIOA_I2C_EN -+#define GPIO_SPK_PWR1_ON 0*16+GPIOA_SPK_PWR1_ON -+#define GPIO_AUDIO_PWR_ON 0*16+GPIOA_AUDIO_PWR_ON -+#define GPIO_EARPHONE_PWR_ON 0*16+GPIOA_EARPHONE_PWR_ON -+ -+#define GPIO_UNKNOWNA4 0*16+GPIOA_UNKNOWN4 -+#define GPIO_BUTTON_BACKLIGHT_N 0*16+GPIOA_BUTTON_BACKLIGHT_N -+#define GPIO_SPK_PWR2_ON 0*16+GPIOA_SPK_PWR2_ON -+#define GPIO_BUTTON_RECORD_N 0*16+GPIOA_BUTTON_RECORD_N -+ -+#define GPIO_BUTTON_CAMERA_N 0*16+GPIOA_BUTTON_CAMERA_N -+#define GPIO_UNKNOWNA9 0*16+GPIOA_UNKNOWN9 -+#define GPIO_FLASHLIGHT 0*16+GPIOA_FLASHLIGHT -+#define GPIO_COVER_ROTATE_N 0*16+GPIOA_COVER_ROTATE_N -+ -+#define GPIO_TOUCHSCREEN_N 0*16+GPIOA_TOUCHSCREEN_N -+#define GPIO_VOL_UP_N 0*16+GPIOA_VOL_UP_N -+#define GPIO_VOL_DOWN_N 0*16+GPIOA_VOL_DOWN_N -+#define GPIO_LCD_PWR5_ON 0*16+GPIOA_LCD_PWR5_ON -+ -+/* ASIC3 GPIO B bank */ -+ -+#define GPIO_BB_READY 1*16+GPIOB_BB_READY -+#define GPIO_CODEC_PDN 1*16+GPIOB_CODEC_PDN -+#define GPIO_UNKNOWNB2 1*16+GPIOB_UNKNOWN2 -+#define GPIO_BB_UNKNOWN3 1*16+GPIOB_BB_UNKNOWN3 -+ -+#define GPIO_BT_IRQ 1*16+GPIOB_BT_IRQ -+#define GPIO_CLAMSHELL_N 1*16+GPIOB_CLAMSHELL_N -+#define GPIO_LCD_PWR3_ON 1*16+GPIOB_LCD_PWR3_ON -+#define GPIO_BB_ALERT 1*16+GPIOB_BB_ALERT -+ -+#define GPIO_BB_RESET2 1*16+GPIOB_BB_RESET2 -+#define GPIO_EARPHONE_N 1*16+GPIOB_EARPHONE_N -+#define GPIO_MICRECORD_N 1*16+GPIOB_MICRECORD_N -+#define GPIO_NIGHT_SENSOR 1*16+GPIOB_NIGHT_SENSOR -+ -+#define GPIO_UMTS_DCD 1*16+GPIOB_UMTS_DCD -+#define GPIO_UNKNOWNB13 1*16+GPIOB_UNKNOWN13 -+#define GPIO_CHARGE_EN 1*16+GPIOB_CHARGE_EN -+#define GPIO_USB_PUEN 1*16+GPIOB_USB_PUEN -+ -+/* ASIC3 GPIO C bank */ -+ -+#define GPIO_LED_BTWIFI 2*16+GPIOC_LED_BTWIFI -+#define GPIO_LED_RED 2*16+GPIOC_LED_RED -+#define GPIO_LED_GREEN 2*16+GPIOC_LED_GREEN -+#define GPIO_BOARDID3 2*16+GPIOC_BOARDID3 -+ -+#define GPIO_WIFI_IRQ_N 2*16+GPIOC_WIFI_IRQ_N -+#define GPIO_WIFI_RESET 2*16+GPIOC_WIFI_RESET -+#define GPIO_WIFI_PWR1_ON 2*16+GPIOC_WIFI_PWR1_ON -+#define GPIO_BT_RESET 2*16+GPIOC_BT_RESET -+ -+#define GPIO_UNKNOWNC8 2*16+GPIOC_UNKNOWN8 -+#define GPIO_LCD_PWR1_ON 2*16+GPIOC_LCD_PWR1_ON -+#define GPIO_LCD_PWR2_ON 2*16+GPIOC_LCD_PWR2_ON -+#define GPIO_BOARDID2 2*16+GPIOC_BOARDID2 -+ -+#define GPIO_BOARDID1 2*16+GPIOC_BOARDID1 -+#define GPIO_BOARDID0 2*16+GPIOC_BOARDID0 -+#define GPIO_BT_PWR_ON 2*16+GPIOC_BT_PWR_ON -+#define GPIO_CHARGE_ON 2*16+GPIOC_CHARGE_ON -+ -+/* ASIC3 GPIO D bank */ -+ -+#define GPIO_KEY_OK_N 3*16+GPIOD_KEY_OK_N -+#define GPIO_KEY_RIGHT_N 3*16+GPIOD_KEY_RIGHT_N -+#define GPIO_KEY_LEFT_N 3*16+GPIOD_KEY_LEFT_N -+#define GPIO_KEY_DOWN_N 3*16+GPIOD_KEY_DOWN_N -+ -+#define GPIO_KEY_UP_N 3*16+GPIOD_KEY_UP_N -+#define GPIO_SDIO_DET 3*16+GPIOD_SDIO_DET -+#define GPIO_WIFI_PWR2_ON 3*16+GPIOD_WIFI_PWR2_ON -+#define GPIO_HW_REBOOT 3*16+GPIOD_HW_REBOOT -+ -+#define GPIO_BB_RESET1 3*16+GPIOD_BB_RESET1 -+#define GPIO_UNKNOWND9 3*16+GPIOD_UNKNOWN9 -+#define GPIO_VIBRA_PWR_ON 3*16+GPIOD_VIBRA_PWR_ON -+#define GPIO_WIFI_PWR3_ON 3*16+GPIOD_WIFI_PWR3_ON -+ -+#define GPIO_FL_PWR_ON 3*16+GPIOD_FL_PWR_ON -+#define GPIO_LCD_PWR4_ON 3*16+GPIOD_LCD_PWR4_ON -+#define GPIO_BL_KEYP_PWR_ON 3*16+GPIOD_BL_KEYP_PWR_ON -+#define GPIO_BL_KEYB_PWR_ON 3*16+GPIOD_BL_KEYB_PWR_ON -+ -+#define HTCUNIVERSAL_EGPIO_BASE PXA_CS2_PHYS+0x02000000 -+ -+#define EGPIO4_ON 4 /* something */ -+#define EGPIO5_BT_3V3_ON 5 /* Bluetooth related */ -+#define EGPIO6_WIFI_ON 6 /* WLAN related*/ -+ -+extern void htcuniversal_egpio_enable( u_int16_t bits ); -+extern void htcuniversal_egpio_disable( u_int16_t bits ); -+ -+#endif /* _HTCUNIVERSAL_ASIC_H_ */ -+ -Index: linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-gpio.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-gpio.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,220 @@ -+/* -+ * include/asm-arm/arch-pxa/htcuniversal-gpio.h -+ * History: -+ * -+ * 2004-12-10 Michael Opdenacker. Wrote down GPIO settings as identified by Jamey Hicks. -+ * Reused the h2200-gpio.h file as a template. -+ */ -+ -+#ifndef _HTCUNIVERSAL_GPIO_H_ -+#define _HTCUNIVERSAL_GPIO_H_ -+ -+#include -+ -+#define GET_HTCUNIVERSAL_GPIO(gpio) \ -+ (GPLR(GPIO_NR_HTCUNIVERSAL_ ## gpio) & GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio)) -+ -+#define SET_HTCUNIVERSAL_GPIO(gpio, setp) \ -+do { \ -+if (setp) \ -+ GPSR(GPIO_NR_HTCUNIVERSAL_ ## gpio) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio); \ -+else \ -+ GPCR(GPIO_NR_HTCUNIVERSAL_ ## gpio) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio); \ -+} while (0) -+ -+#define SET_HTCUNIVERSAL_GPIO_N(gpio, setp) \ -+do { \ -+if (setp) \ -+ GPCR(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N); \ -+else \ -+ GPSR(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N); \ -+} while (0) -+ -+#define HTCUNIVERSAL_IRQ(gpio) \ -+ IRQ_GPIO(GPIO_NR_HTCUNIVERSAL_ ## gpio) -+ -+#define GPIO_NR_HTCUNIVERSAL_KEY_ON_N 0 -+#define GPIO_NR_HTCUNIVERSAL_GP_RST_N 1 -+ -+#define GPIO_NR_HTCUNIVERSAL_USB_DET 9 -+#define GPIO_NR_HTCUNIVERSAL_POWER_DET 10 -+ -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD7 12 -+#define GPIO_NR_HTCUNIVERSAL_ASIC3_SDIO_INT_N 13 -+#define GPIO_NR_HTCUNIVERSAL_ASIC3_EXT_INT 14 -+#define GPIO_NR_HTCUNIVERSAL_CS1_N 15 -+ -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD6 17 -+#define GPIO_NR_HTCUNIVERSAL_RDY 18 -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_START 19 -+ -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT7 22 -+#define GPIO_NR_HTCUNIVERSAL_SPI_CLK 23 -+#define GPIO_NR_HTCUNIVERSAL_SPI_FRM 24 -+#define GPIO_NR_HTCUNIVERSAL_SPI_DO 25 -+#define GPIO_NR_HTCUNIVERSAL_SPI_DI 26 -+ -+#define GPIO_NR_HTCUNIVERSAL_CODEC_ON 27 -+#define GPIO_NR_HTCUNIVERSAL_I2S_BCK 28 -+#define GPIO_NR_HTCUNIVERSAL_I2S_DIN 29 -+#define GPIO_NR_HTCUNIVERSAL_I2S_DOUT 30 -+#define GPIO_NR_HTCUNIVERSAL_I2S_SYNC 31 -+ -+#define GPIO_NR_HTCUNIVERSAL_RS232_ON 32 -+#define GPIO_NR_HTCUNIVERSAL_CS5_N 33 -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_RXD 34 -+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS 35 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN7 36 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN3 37 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN4 38 -+#define GPIO_NR_HTCUNIVERSAL_PHONE_TXD 39 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT6 40 -+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS 41 -+#define GPIO_NR_HTCUNIVERSAL_BT_RXD 42 -+#define GPIO_NR_HTCUNIVERSAL_BT_TXD 43 -+#define GPIO_NR_HTCUNIVERSAL_BT_UART_CTS 44 -+#define GPIO_NR_HTCUNIVERSAL_BT_UART_RTS 45 -+ -+#define GPIO_NR_HTCUNIVERSAL_SIR_RXD 42 -+#define GPIO_NR_HTCUNIVERSAL_SIR_TXD 43 -+ -+#define GPIO_NR_HTCUNIVERSAL_POE_N 48 -+#define GPIO_NR_HTCUNIVERSAL_PWE_N 49 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD3 50 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD2 51 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD4 52 -+ -+#define GPIO_NR_HTCUNIVERSAL_CIF_MCLK 53 -+#define GPIO_NR_HTCUNIVERSAL_CIF_PCLK 54 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD1 55 -+ -+#define GPIO_NR_HTCUNIVERSAL_LDD0 58 -+#define GPIO_NR_HTCUNIVERSAL_LDD1 59 -+#define GPIO_NR_HTCUNIVERSAL_LDD2 60 -+#define GPIO_NR_HTCUNIVERSAL_LDD3 61 -+#define GPIO_NR_HTCUNIVERSAL_LDD4 62 -+#define GPIO_NR_HTCUNIVERSAL_LDD5 63 -+#define GPIO_NR_HTCUNIVERSAL_LDD6 64 -+#define GPIO_NR_HTCUNIVERSAL_LDD7 65 -+#define GPIO_NR_HTCUNIVERSAL_LDD8 66 -+#define GPIO_NR_HTCUNIVERSAL_LDD9 67 -+#define GPIO_NR_HTCUNIVERSAL_LDD10 68 -+#define GPIO_NR_HTCUNIVERSAL_LDD11 69 -+#define GPIO_NR_HTCUNIVERSAL_LDD12 70 -+#define GPIO_NR_HTCUNIVERSAL_LDD13 71 -+#define GPIO_NR_HTCUNIVERSAL_LDD14 72 -+#define GPIO_NR_HTCUNIVERSAL_LDD15 73 -+ -+#define GPIO_NR_HTCUNIVERSAL_LFCLK_RD 74 -+#define GPIO_NR_HTCUNIVERSAL_LFCLK_A0 75 -+#define GPIO_NR_HTCUNIVERSAL_LFCLK_WR 76 -+#define GPIO_NR_HTCUNIVERSAL_LBIAS 77 -+ -+#define GPIO_NR_HTCUNIVERSAL_CS2_N 78 -+#define GPIO_NR_HTCUNIVERSAL_CS3_N 79 -+#define GPIO_NR_HTCUNIVERSAL_CS4_N 80 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD0 81 -+#define GPIO_NR_HTCUNIVERSAL_CIF_DD5 82 -+ -+#define GPIO_NR_HTCUNIVERSAL_CIF_LV 84 -+#define GPIO_NR_HTCUNIVERSAL_CIF_FV 85 -+ -+#define GPIO_NR_HTCUNIVERSAL_LCD1 86 -+#define GPIO_NR_HTCUNIVERSAL_LCD2 87 -+ -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN5 90 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN6 91 -+ -+#define GPIO_NR_HTCUNIVERSAL_DREQ1 97 -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_RESET 98 -+ -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN0 100 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN1 101 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN2 102 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT0 103 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT1 104 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT2 105 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT3 106 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT4 107 -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT5 108 -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_UNKNOWN 109 -+#define GPIO_NR_HTCUNIVERSAL_PHONE_OFF 110 -+ -+#define GPIO_NR_HTCUNIVERSAL_USB_PUEN 112 -+#define GPIO_NR_HTCUNIVERSAL_I2S_SYSCLK 113 -+ -+#define GPIO_NR_HTCUNIVERSAL_PWM_OUT1 115 -+ -+#define GPIO_NR_HTCUNIVERSAL_I2C_SCL 117 -+#define GPIO_NR_HTCUNIVERSAL_I2C_SDA 118 -+ -+#if 0 -+#define GPIO_NR_HTCUNIVERSAL_CPU_BATT_FAULT_N -+#define GPIO_NR_HTCUNIVERSAL_ASIC3_RESET_N -+#define GPIO_NR_HTCUNIVERSAL_CHARGE_EN_N -+#define GPIO_NR_HTCUNIVERSAL_FLASH_VPEN -+#define GPIO_NR_HTCUNIVERSAL_BATT_OFF -+#define GPIO_NR_HTCUNIVERSAL_USB_CHARGE_RATE -+#define GPIO_NR_HTCUNIVERSAL_BL_DETECT_N -+#define GPIO_NR_HTCUNIVERSAL_CPU_HW_RESET_N -+#endif -+ -+ -+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_CLK_MD (23 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_FRM_MD (24 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DO_MD (25 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DI_MD (26 | GPIO_ALT_FN_1_IN) -+ -+#define GPIO_NR_HTCUNIVERSAL_I2S_BCK_MD (28 | GPIO_ALT_FN_1_OUT) -+#define GPIO_NR_HTCUNIVERSAL_I2S_DIN_MD (29 | GPIO_ALT_FN_2_IN) -+#define GPIO_NR_HTCUNIVERSAL_I2S_DOUT_MD (30 | GPIO_ALT_FN_1_OUT) -+#define GPIO_NR_HTCUNIVERSAL_I2S_SYNC_MD (31 | GPIO_ALT_FN_1_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_RXD_MD (34 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS_MD (35 | GPIO_ALT_FN_1_IN) -+ -+#define GPIO_NR_HTCUNIVERSAL_PHONE_TXD_MD (39 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS_MD (41 | GPIO_ALT_FN_2_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_BT_RXD_MD (42 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_BT_TXD_MD (43 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_BT_UART_CTS_MD (44 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_BT_UART_RTS_MD (45 | GPIO_ALT_FN_2_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_SIR_RXD_MD (46 | GPIO_ALT_FN_2_IN) -+#define GPIO_NR_HTCUNIVERSAL_SIR_TXD_MD (47 | GPIO_ALT_FN_1_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_POE_N_MD (48 | GPIO_ALT_FN_2_OUT | GPIO_DFLT_HIGH) -+#define GPIO_NR_HTCUNIVERSAL_PWE_N_MD (49 | GPIO_ALT_FN_2_OUT | GPIO_DFLT_HIGH) -+ -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN0_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN0 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN1_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN1 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN2_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN2 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN3_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN3 | GPIO_ALT_FN_3_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN4_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN4 | GPIO_ALT_FN_2_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN5_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN5 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN6_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN6 | GPIO_ALT_FN_1_IN) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKIN7_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN7 | GPIO_ALT_FN_3_IN) -+ -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT0_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT0 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT1_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT1 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT2_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT2 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT3_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT3 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT4_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT4 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT5_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT5 | GPIO_ALT_FN_2_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT6_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT6 | GPIO_ALT_FN_1_OUT) -+#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT7_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT7 | GPIO_ALT_FN_1_OUT) -+ -+ -+#define GPIO_NR_HTCUNIVERSAL_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_PWM1OUT_MD (115 | GPIO_ALT_FN_3_OUT) -+ -+#define GPIO_NR_HTCUNIVERSAL_I2C_SCL_MD (117 | GPIO_ALT_FN_1_OUT) -+#define GPIO_NR_HTCUNIVERSAL_I2C_SDA_MD (118 | GPIO_ALT_FN_1_OUT) -+ -+#endif /* _HTCUNIVERSAL_GPIO_H */ -Index: linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-init.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-init.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,14 @@ -+/* -+ * include/asm/arm/arch-pxa/htcuniversal-init.h -+ * Copyright (c) 2004 SDG Systems, LLC -+ */ -+ -+#ifndef _HTCUNIVERSAL_INIT_H_ -+#define _HTCUNIVERSAL_INIT_H_ -+ -+/* htcuniversal initialization data should be found here -+ * See -init.h files from other devices for details -+ */ -+ -+#endif /* _HTCUNIVERSAL_INIT_H_ */ -+ -Index: linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,3 @@ -+#include -+ -+#define HTCUNIVERSAL_ASIC3_IRQ_BASE IRQ_BOARD_START -Index: linux-2.6.23/include/asm-arm/arch-pxa/pxa-pm_ll.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/arch-pxa/pxa-pm_ll.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,6 @@ -+struct pxa_ll_pm_ops { -+ void (*suspend)(unsigned long); -+ void (*resume)(void); -+}; -+ -+extern struct pxa_ll_pm_ops *pxa_pm_set_ll_ops(struct pxa_ll_pm_ops *new_ops); -Index: linux-2.6.23/include/asm-arm/hardware/asic3_keys.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/hardware/asic3_keys.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,18 @@ -+#include -+ -+struct asic3_keys_button { -+ /* Configuration parameters */ -+ int keycode; -+ int gpio; -+ int active_low; -+ char *desc; -+ int type; -+ /* Internal state vars - add below */ -+}; -+ -+struct asic3_keys_platform_data { -+ struct asic3_keys_button *buttons; -+ int nbuttons; -+ struct input_dev *input; -+ struct device *asic3_dev; -+}; -Index: linux-2.6.23/include/asm-arm/hardware/asic3_leds.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/hardware/asic3_leds.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,34 @@ -+/* -+ * LEDs support for HTC ASIC3 devices. -+ * -+ * Copyright (c) 2006 Anton Vorontsov -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+struct asic3_leds_machinfo; -+ -+struct asic3_led { -+ struct led_classdev led_cdev; -+ int hw_num; /* Number of "hardware-accelerated" led */ -+ int gpio_num; /* Number of GPIO if hw_num == -1 */ -+ struct asic3_leds_machinfo *machinfo; -+}; -+ -+struct asic3_leds_machinfo { -+ int num_leds; -+ struct asic3_led *leds; -+ struct platform_device *asic3_pdev; -+}; -+ -+extern int asic3_leds_register(void); -+extern void asic3_leds_unregister(void); -+ -Index: linux-2.6.23/include/asm-arm/hardware/ipaq-asic3.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/hardware/ipaq-asic3.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,602 @@ -+/* -+ * -+ * Definitions for the HTC ASIC3 chip found in several handheld devices -+ * -+ * Copyright 2001 Compaq Computer Corporation. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, -+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS -+ * FITNESS FOR ANY PARTICULAR PURPOSE. -+ * -+ * Author: Andrew Christian -+ * -+ */ -+ -+#ifndef IPAQ_ASIC3_H -+#define IPAQ_ASIC3_H -+ -+/****************************************************/ -+/* IPAQ, ASIC #3, replaces ASIC #1 */ -+ -+#define IPAQ_ASIC3_OFFSET(x,y) (_IPAQ_ASIC3_ ## x ## _Base + _IPAQ_ASIC3_ ## x ## _ ## y) -+#define IPAQ_ASIC3_GPIO_OFFSET(x,y) (_IPAQ_ASIC3_GPIO_ ## x ## _Base + _IPAQ_ASIC3_GPIO_ ## y) -+ -+ -+/* All offsets below are specified with the following address bus shift */ -+#define ASIC3_DEFAULT_ADDR_SHIFT 2 -+ -+#define _IPAQ_ASIC3_GPIO_A_Base 0x0000 -+#define _IPAQ_ASIC3_GPIO_B_Base 0x0100 -+#define _IPAQ_ASIC3_GPIO_C_Base 0x0200 -+#define _IPAQ_ASIC3_GPIO_D_Base 0x0300 -+ -+#define _IPAQ_ASIC3_GPIO_Mask 0x00 /* R/W 0:don't mask, 1:mask interrupt */ -+#define _IPAQ_ASIC3_GPIO_Direction 0x04 /* R/W 0:input, 1:output */ -+#define _IPAQ_ASIC3_GPIO_Out 0x08 /* R/W 0:output low, 1:output high */ -+#define _IPAQ_ASIC3_GPIO_TriggerType 0x0c /* R/W 0:level, 1:edge */ -+#define _IPAQ_ASIC3_GPIO_EdgeTrigger 0x10 /* R/W 0:falling, 1:rising */ -+#define _IPAQ_ASIC3_GPIO_LevelTrigger 0x14 /* R/W 0:low, 1:high level detect */ -+#define _IPAQ_ASIC3_GPIO_SleepMask 0x18 /* R/W 0:don't mask, 1:mask trigger in sleep mode */ -+#define _IPAQ_ASIC3_GPIO_SleepOut 0x1c /* R/W level 0:low, 1:high in sleep mode */ -+#define _IPAQ_ASIC3_GPIO_BattFaultOut 0x20 /* R/W level 0:low, 1:high in batt_fault */ -+#define _IPAQ_ASIC3_GPIO_IntStatus 0x24 /* R/W 0:none, 1:detect */ -+#define _IPAQ_ASIC3_GPIO_AltFunction 0x28 /* R/W 0:normal control 1:LED register control */ -+#define _IPAQ_ASIC3_GPIO_SleepConf 0x2c /* R/W bit 1: autosleep 0: disable gposlpout in normal mode, enable gposlpout in sleep mode */ -+#define _IPAQ_ASIC3_GPIO_Status 0x30 /* R Pin status */ -+ -+#define IPAQ_ASIC3_GPIO_A_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Mask ) -+#define IPAQ_ASIC3_GPIO_A_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Direction ) -+#define IPAQ_ASIC3_GPIO_A_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Out ) -+#define IPAQ_ASIC3_GPIO_A_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, A, TriggerType ) -+#define IPAQ_ASIC3_GPIO_A_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, A, EdgeTrigger ) -+#define IPAQ_ASIC3_GPIO_A_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, A, LevelTrigger ) -+#define IPAQ_ASIC3_GPIO_A_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, A, SleepMask ) -+#define IPAQ_ASIC3_GPIO_A_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, A, SleepOut ) -+#define IPAQ_ASIC3_GPIO_A_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, A, BattFaultOut ) -+#define IPAQ_ASIC3_GPIO_A_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, A, IntStatus ) -+#define IPAQ_ASIC3_GPIO_A_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, A, AltFunction ) -+#define IPAQ_ASIC3_GPIO_A_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, A, SleepConf ) -+#define IPAQ_ASIC3_GPIO_A_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Status ) -+ -+#define IPAQ_ASIC3_GPIO_B_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Mask ) -+#define IPAQ_ASIC3_GPIO_B_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Direction ) -+#define IPAQ_ASIC3_GPIO_B_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Out ) -+#define IPAQ_ASIC3_GPIO_B_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, B, TriggerType ) -+#define IPAQ_ASIC3_GPIO_B_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, B, EdgeTrigger ) -+#define IPAQ_ASIC3_GPIO_B_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, B, LevelTrigger ) -+#define IPAQ_ASIC3_GPIO_B_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, B, SleepMask ) -+#define IPAQ_ASIC3_GPIO_B_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, B, SleepOut ) -+#define IPAQ_ASIC3_GPIO_B_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, B, BattFaultOut ) -+#define IPAQ_ASIC3_GPIO_B_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, B, IntStatus ) -+#define IPAQ_ASIC3_GPIO_B_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, B, AltFunction ) -+#define IPAQ_ASIC3_GPIO_B_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, B, SleepConf ) -+#define IPAQ_ASIC3_GPIO_B_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Status ) -+ -+#define IPAQ_ASIC3_GPIO_C_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Mask ) -+#define IPAQ_ASIC3_GPIO_C_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Direction ) -+#define IPAQ_ASIC3_GPIO_C_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Out ) -+#define IPAQ_ASIC3_GPIO_C_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, C, TriggerType ) -+#define IPAQ_ASIC3_GPIO_C_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, C, EdgeTrigger ) -+#define IPAQ_ASIC3_GPIO_C_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, C, LevelTrigger ) -+#define IPAQ_ASIC3_GPIO_C_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, C, SleepMask ) -+#define IPAQ_ASIC3_GPIO_C_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, C, SleepOut ) -+#define IPAQ_ASIC3_GPIO_C_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, C, BattFaultOut ) -+#define IPAQ_ASIC3_GPIO_C_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, C, IntStatus ) -+#define IPAQ_ASIC3_GPIO_C_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, C, AltFunction ) -+#define IPAQ_ASIC3_GPIO_C_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, C, SleepConf ) -+#define IPAQ_ASIC3_GPIO_C_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Status ) -+ -+#define IPAQ_ASIC3_GPIO_D_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Mask ) -+#define IPAQ_ASIC3_GPIO_D_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Direction ) -+#define IPAQ_ASIC3_GPIO_D_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Out ) -+#define IPAQ_ASIC3_GPIO_D_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, D, TriggerType ) -+#define IPAQ_ASIC3_GPIO_D_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, D, EdgeTrigger ) -+#define IPAQ_ASIC3_GPIO_D_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, D, LevelTrigger ) -+#define IPAQ_ASIC3_GPIO_D_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, D, SleepMask ) -+#define IPAQ_ASIC3_GPIO_D_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, D, SleepOut ) -+#define IPAQ_ASIC3_GPIO_D_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, D, BattFaultOut ) -+#define IPAQ_ASIC3_GPIO_D_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, D, IntStatus ) -+#define IPAQ_ASIC3_GPIO_D_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, D, AltFunction ) -+#define IPAQ_ASIC3_GPIO_D_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, D, SleepConf ) -+#define IPAQ_ASIC3_GPIO_D_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Status ) -+ -+#define _IPAQ_ASIC3_SPI_Base 0x0400 -+#define _IPAQ_ASIC3_SPI_Control 0x0000 -+#define _IPAQ_ASIC3_SPI_TxData 0x0004 -+#define _IPAQ_ASIC3_SPI_RxData 0x0008 -+#define _IPAQ_ASIC3_SPI_Int 0x000c -+#define _IPAQ_ASIC3_SPI_Status 0x0010 -+ -+#define IPAQ_ASIC3_SPI_Control(_b) IPAQ_ASIC3( _b, u16, SPI, Control ) -+#define IPAQ_ASIC3_SPI_TxData(_b) IPAQ_ASIC3( _b, u16, SPI, TxData ) -+#define IPAQ_ASIC3_SPI_RxData(_b) IPAQ_ASIC3( _b, u16, SPI, RxData ) -+#define IPAQ_ASIC3_SPI_Int(_b) IPAQ_ASIC3( _b, u16, SPI, Int ) -+#define IPAQ_ASIC3_SPI_Status(_b) IPAQ_ASIC3( _b, u16, SPI, Status ) -+ -+#define SPI_CONTROL_SPR(clk) ((clk) & 0x0f) /* Clock rate */ -+ -+#define _IPAQ_ASIC3_PWM_0_Base 0x0500 -+#define _IPAQ_ASIC3_PWM_1_Base 0x0600 -+#define _IPAQ_ASIC3_PWM_TimeBase 0x0000 -+#define _IPAQ_ASIC3_PWM_PeriodTime 0x0004 -+#define _IPAQ_ASIC3_PWM_DutyTime 0x0008 -+ -+#define IPAQ_ASIC3_PWM_TimeBase(_b, x) IPAQ_ASIC3_N( _b, u16, PWM, x, TimeBase ) -+#define IPAQ_ASIC3_PWM_PeriodTime(_b, x) IPAQ_ASIC3_N( _b, u16, PWM, x, PeriodTime ) -+#define IPAQ_ASIC3_PWM_DutyTime(_b, x) IPAQ_ASIC3_N( _b, u16, PWM, x, DutyTime ) -+ -+#define PWM_TIMEBASE_VALUE(x) ((x)&0xf) /* Low 4 bits sets time base */ -+#define PWM_TIMEBASE_ENABLE (1 << 4) /* Enable clock */ -+ -+#define _IPAQ_ASIC3_LED_0_Base 0x0700 -+#define _IPAQ_ASIC3_LED_1_Base 0x0800 -+#define _IPAQ_ASIC3_LED_2_Base 0x0900 -+#define _IPAQ_ASIC3_LED_TimeBase 0x0000 /* R/W 7 bits */ -+#define _IPAQ_ASIC3_LED_PeriodTime 0x0004 /* R/W 12 bits */ -+#define _IPAQ_ASIC3_LED_DutyTime 0x0008 /* R/W 12 bits */ -+#define _IPAQ_ASIC3_LED_AutoStopCount 0x000c /* R/W 16 bits */ -+ -+#define IPAQ_ASIC3_LED_TimeBase(_b, x) IPAQ_ASIC3_N( _b, u8, LED, x, TimeBase ) -+#define IPAQ_ASIC3_LED_PeriodTime(_b, x) IPAQ_ASIC3_N( _b, u16, LED, x, PeriodTime ) -+#define IPAQ_ASIC3_LED_DutyTime(_b, x) IPAQ_ASIC3_N( _b, u16, LED, x, DutyTime ) -+#define IPAQ_ASIC3_LED_AutoStopCount(_b, x) IPAQ_ASIC3_N( _b, u16, LED, x, AutoStopCount ) -+ -+/* LED TimeBase bits - match ASIC2 */ -+#define LED_TBS 0x0f /* Low 4 bits sets time base, max = 13 */ -+ /* Note: max = 5 on hx4700 */ -+ /* 0: maximum time base */ -+ /* 1: maximum time base / 2 */ -+ /* n: maximum time base / 2^n */ -+ -+#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */ -+#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop set 0:disable, 1:enable */ -+#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */ -+ -+#define _IPAQ_ASIC3_CLOCK_Base 0x0A00 -+#define _IPAQ_ASIC3_CLOCK_CDEX 0x00 -+#define _IPAQ_ASIC3_CLOCK_SEL 0x04 -+ -+#define IPAQ_ASIC3_CLOCK_CDEX(_b) IPAQ_ASIC3( _b, u16, CLOCK, CDEX ) -+#define IPAQ_ASIC3_CLOCK_SEL(_b) IPAQ_ASIC3( _b, u16, CLOCK, SEL ) -+ -+#define CLOCK_CDEX_SOURCE (1 << 0) /* 2 bits */ -+#define CLOCK_CDEX_SOURCE0 (1 << 0) -+#define CLOCK_CDEX_SOURCE1 (1 << 1) -+#define CLOCK_CDEX_SPI (1 << 2) -+#define CLOCK_CDEX_OWM (1 << 3) -+#define CLOCK_CDEX_PWM0 (1 << 4) -+#define CLOCK_CDEX_PWM1 (1 << 5) -+#define CLOCK_CDEX_LED0 (1 << 6) -+#define CLOCK_CDEX_LED1 (1 << 7) -+#define CLOCK_CDEX_LED2 (1 << 8) -+ -+#define CLOCK_CDEX_SD_HOST (1 << 9) /* R/W: SD host clock source 24.576M/12.288M */ -+#define CLOCK_CDEX_SD_BUS (1 << 10) /* R/W: SD bus clock source control 24.576M/12.288M */ -+#define CLOCK_CDEX_SMBUS (1 << 11) -+#define CLOCK_CDEX_CONTROL_CX (1 << 12) -+ -+#define CLOCK_CDEX_EX0 (1 << 13) /* R/W: 32.768 kHz crystal */ -+#define CLOCK_CDEX_EX1 (1 << 14) /* R/W: 24.576 MHz crystal */ -+ -+#define CLOCK_SEL_SD_HCLK_SEL (1 << 0) /* R/W: SDIO host clock select - 1: 24.576 Mhz, 0: 12.288 MHz */ -+#define CLOCK_SEL_SD_BCLK_SEL (1 << 1) /* R/W: SDIO bus clock select - 1: 24.576 MHz, 0: 12.288 MHz */ -+#define CLOCK_SEL_CX (1 << 2) /* R/W: INT clock source control (32.768 kHz) */ -+ -+ -+#define _IPAQ_ASIC3_INTR_Base 0x0B00 -+ -+#define _IPAQ_ASIC3_INTR_IntMask 0x00 /* Interrupt mask control */ -+#define _IPAQ_ASIC3_INTR_PIntStat 0x04 /* Peripheral interrupt status */ -+#define _IPAQ_ASIC3_INTR_IntCPS 0x08 /* Interrupt timer clock pre-scale */ -+#define _IPAQ_ASIC3_INTR_IntTBS 0x0c /* Interrupt timer set */ -+ -+#define IPAQ_ASIC3_INTR_IntMask(_b) IPAQ_ASIC3( _b, u8, INTR, IntMask ) -+#define IPAQ_ASIC3_INTR_PIntStat(_b) IPAQ_ASIC3( _b, u8, INTR, PIntStat ) -+#define IPAQ_ASIC3_INTR_IntCPS(_b) IPAQ_ASIC3( _b, u8, INTR, IntCPS ) -+#define IPAQ_ASIC3_INTR_IntTBS(_b) IPAQ_ASIC3( _b, u16, INTR, IntTBS ) -+ -+#define ASIC3_INTMASK_GINTMASK (1 << 0) /* Global interrupt mask 1:enable */ -+#define ASIC3_INTMASK_GINTEL (1 << 1) /* 1: rising edge, 0: hi level */ -+#define ASIC3_INTMASK_MASK0 (1 << 2) -+#define ASIC3_INTMASK_MASK1 (1 << 3) -+#define ASIC3_INTMASK_MASK2 (1 << 4) -+#define ASIC3_INTMASK_MASK3 (1 << 5) -+#define ASIC3_INTMASK_MASK4 (1 << 6) -+#define ASIC3_INTMASK_MASK5 (1 << 7) -+ -+#define ASIC3_INTR_PERIPHERAL_A (1 << 0) -+#define ASIC3_INTR_PERIPHERAL_B (1 << 1) -+#define ASIC3_INTR_PERIPHERAL_C (1 << 2) -+#define ASIC3_INTR_PERIPHERAL_D (1 << 3) -+#define ASIC3_INTR_LED0 (1 << 4) -+#define ASIC3_INTR_LED1 (1 << 5) -+#define ASIC3_INTR_LED2 (1 << 6) -+#define ASIC3_INTR_SPI (1 << 7) -+#define ASIC3_INTR_SMBUS (1 << 8) -+#define ASIC3_INTR_OWM (1 << 9) -+ -+#define ASIC3_INTR_CPS(x) ((x)&0x0f) /* 4 bits, max 14 */ -+#define ASIC3_INTR_CPS_SET ( 1 << 4 ) /* Time base enable */ -+ -+ -+/* Basic control of the SD ASIC */ -+#define _IPAQ_ASIC3_SDHWCTRL_Base 0x0E00 -+ -+#define _IPAQ_ASIC3_SDHWCTRL_SDConf 0x00 -+#define IPAQ_ASIC3_SDHWCTRL_SDConf(_b) IPAQ_ASIC3( _b, u8, SDHWCTRL, SDConf ) -+ -+#define ASIC3_SDHWCTRL_SUSPEND (1 << 0) /* 1=suspend all SD operations */ -+#define ASIC3_SDHWCTRL_CLKSEL (1 << 1) /* 1=SDICK, 0=HCLK */ -+#define ASIC3_SDHWCTRL_PCLR (1 << 2) /* All registers of SDIO cleared */ -+#define ASIC3_SDHWCTRL_LEVCD (1 << 3) /* Level of SD card detection: 1:high, 0:low */ -+#define ASIC3_SDHWCTRL_LEVWP (1 << 4) /* Level of SD card write protection: 1=low, 0=high */ -+#define ASIC3_SDHWCTRL_SDLED (1 << 5) /* SD card LED signal 1=enable, 0=disable */ -+#define ASIC3_SDHWCTRL_SDPWR (1 << 6) /* SD card power supply control 1=enable */ -+ -+ -+/* This is a pointer to an array of 12 u32 values - but only the lower 2 bytes matter */ -+/* Use it as "IPAQ_ASIC3_HWPROTECT_ARRAY[x]" */ -+ -+#define _IPAQ_ASIC3_HWPROTECT_Base 0x1000 -+#define IPAQ_ASIC3_HWPROTECT_ARRAY ((volatile u32*)(_IPAQ_ASIC3_Base + _IPAQ_ASIC3_HWPROTECT_Base)) -+#define HWPROTECT_ARRAY_LEN 12 -+#define HWPROTECT_ARRAY_VALUES {0x4854,0x432d,0x5344,0x494f,0x2050,0x2f4e,0x3a33,0x3048,0x3830,0x3032,0x382d,0x3030} -+ -+ -+#define _IPAQ_ASIC3_EXTCF_Base 0x1100 -+ -+#define _IPAQ_ASIC3_EXTCF_Select 0x00 -+#define _IPAQ_ASIC3_EXTCF_Reset 0x04 -+ -+#define IPAQ_ASIC3_EXTCF_Select(_b) IPAQ_ASIC3( _b, u16, EXTCF, Select ) -+#define IPAQ_ASIC3_EXTCF_Reset(_b) IPAQ_ASIC3( _b, u16, EXTCF, Reset ) -+ -+#define ASIC3_EXTCF_SMOD0 (1 << 0) /* slot number of mode 0 */ -+#define ASIC3_EXTCF_SMOD1 (1 << 1) /* slot number of mode 1 */ -+#define ASIC3_EXTCF_SMOD2 (1 << 2) /* slot number of mode 2 */ -+#define ASIC3_EXTCF_OWM_EN (1 << 4) /* enable onewire module */ -+#define ASIC3_EXTCF_OWM_SMB (1 << 5) /* OWM bus selection */ -+#define ASIC3_EXTCF_OWM_RESET (1 << 6) /* undocumented, used by OWM and CF */ -+#define ASIC3_EXTCF_CF0_SLEEP_MODE (1 << 7) /* CF0 sleep state control */ -+#define ASIC3_EXTCF_CF1_SLEEP_MODE (1 << 8) /* CF1 sleep state control */ -+#define ASIC3_EXTCF_CF0_PWAIT_EN (1 << 10) /* CF0 PWAIT_n control */ -+#define ASIC3_EXTCF_CF1_PWAIT_EN (1 << 11) /* CF1 PWAIT_n control */ -+#define ASIC3_EXTCF_CF0_BUF_EN (1 << 12) /* CF0 buffer control */ -+#define ASIC3_EXTCF_CF1_BUF_EN (1 << 13) /* CF1 buffer control */ -+#define ASIC3_EXTCF_SD_MEM_ENABLE (1 << 14) -+#define ASIC3_EXTCF_CF_SLEEP (1 << 15) /* CF sleep mode control */ -+ -+/***************************************************************************** -+ * The Onewire interface registers -+ * -+ * OWM_CMD -+ * OWM_DAT -+ * OWM_INTR -+ * OWM_INTEN -+ * OWM_CLKDIV -+ * -+ *****************************************************************************/ -+ -+#define _IPAQ_ASIC3_OWM_Base 0xC00 -+ -+#define _IPAQ_ASIC3_OWM_CMD 0x00 -+#define _IPAQ_ASIC3_OWM_DAT 0x04 -+#define _IPAQ_ASIC3_OWM_INTR 0x08 -+#define _IPAQ_ASIC3_OWM_INTEN 0x0C -+#define _IPAQ_ASIC3_OWM_CLKDIV 0x10 -+ -+#define ASIC3_OWM_CMD_ONEWR (1 << 0) -+#define ASIC3_OWM_CMD_SRA (1 << 1) -+#define ASIC3_OWM_CMD_DQO (1 << 2) -+#define ASIC3_OWM_CMD_DQI (1 << 3) -+ -+#define ASIC3_OWM_INTR_PD (1 << 0) -+#define ASIC3_OWM_INTR_PDR (1 << 1) -+#define ASIC3_OWM_INTR_TBE (1 << 2) -+#define ASIC3_OWM_INTR_TEMP (1 << 3) -+#define ASIC3_OWM_INTR_RBF (1 << 4) -+ -+#define ASIC3_OWM_INTEN_EPD (1 << 0) -+#define ASIC3_OWM_INTEN_IAS (1 << 1) -+#define ASIC3_OWM_INTEN_ETBE (1 << 2) -+#define ASIC3_OWM_INTEN_ETMT (1 << 3) -+#define ASIC3_OWM_INTEN_ERBF (1 << 4) -+ -+#define ASIC3_OWM_CLKDIV_PRE (3 << 0) /* two bits wide at bit position 0 */ -+#define ASIC3_OWM_CLKDIV_DIV (7 << 2) /* 3 bits wide at bit position 2 */ -+ -+ -+/***************************************************************************** -+ * The SD configuration registers are at a completely different location -+ * in memory. They are divided into three sets of registers: -+ * -+ * SD_CONFIG Core configuration register -+ * SD_CTRL Control registers for SD operations -+ * SDIO_CTRL Control registers for SDIO operations -+ * -+ *****************************************************************************/ -+ -+#define IPAQ_ASIC3_SD_CONFIG(_b, s,x) \ -+ (*((volatile s *) ((_b) + _IPAQ_ASIC3_SD_CONFIG_Base + (_IPAQ_ASIC3_SD_CONFIG_ ## x)))) -+ -+#define _IPAQ_ASIC3_SD_CONFIG_Base 0x0400 // Assumes 32 bit addressing -+ -+#define _IPAQ_ASIC3_SD_CONFIG_Command 0x08 /* R/W: Command */ -+#define _IPAQ_ASIC3_SD_CONFIG_Addr0 0x20 /* [9:31] SD Control Register Base Address */ -+#define _IPAQ_ASIC3_SD_CONFIG_Addr1 0x24 /* [9:31] SD Control Register Base Address */ -+#define _IPAQ_ASIC3_SD_CONFIG_IntPin 0x78 /* R/O: interrupt assigned to pin */ -+#define _IPAQ_ASIC3_SD_CONFIG_ClkStop 0x80 /* Set to 0x1f to clock SD controller, 0 otherwise. */ -+ /* at 0x82 - Gated Clock Control */ -+#define _IPAQ_ASIC3_SD_CONFIG_ClockMode 0x84 /* Control clock of SD controller */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_PinStatus 0x88 /* R/0: read status of SD pins */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Power1 0x90 /* Power1 - manual power control */ -+ /* Power2 is at 0x92 - auto power up after card inserted */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Power3 0x94 /* auto power down when card removed */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_CardDetect 0x98 /* */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Slot 0xA0 /* R/O: define support slot number */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk1 0x1E0 /* Could be used for gated clock (don't use) */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk2 0x1E2 /* Could be used for gated clock (don't use) */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable 0x1E8 /* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_GPIO_Status 0x1EC /* GPIO Status Reg. */ -+#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk3 0x1F0 /* Bit 1: double buffer/single buffer */ -+ -+#define IPAQ_ASIC3_SD_CONFIG_Command(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, Command ) -+#define IPAQ_ASIC3_SD_CONFIG_Addr0(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, Addr0 ) -+#define IPAQ_ASIC3_SD_CONFIG_Addr1(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, Addr1 ) -+#define IPAQ_ASIC3_SD_CONFIG_IntPin(_b) IPAQ_ASIC3_SD_CONFIG(_b, u8, IntPin ) -+#define IPAQ_ASIC3_SD_CONFIG_ClkStop(_b) IPAQ_ASIC3_SD_CONFIG(_b, u8, ClkStop ) -+#define IPAQ_ASIC3_SD_CONFIG_ClockMode(_b) IPAQ_ASIC3_SD_CONFIG(_b, u8, ClockMode ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_PinStatus(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_PinStatus ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Power1(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Power1 ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Power3(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Power3 ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_CardDetect(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_CardDetect ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_Slot(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Slot ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk1(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_ExtGateClk1 ) -+#define IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk3(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_ExtGateClk3 ) -+ -+#define SD_CONFIG_ -+ -+#define SD_CONFIG_COMMAND_MAE (1<<1) /* Memory access enable (set to 1 to access SD Controller) */ -+ -+#define SD_CONFIG_CLK_ENABLE_ALL 0x1f -+ -+#define SD_CONFIG_POWER1_PC_33V 0x0200 /* Set for 3.3 volts */ -+#define SD_CONFIG_POWER1_PC_OFF 0x0000 /* Turn off power */ -+ -+#define SD_CONFIG_CARDDETECTMODE_CLK ((x)&0x3) /* two bits - number of cycles for card detection */ -+ -+ -+#define _IPAQ_ASIC3_SD_CTRL_Base 0x1000 -+ -+#define IPAQ_ASIC3_SD(_b, s,x) \ -+ (*((volatile s *) ((_b) + _IPAQ_ASIC3_SD_CTRL_Base + (_IPAQ_ASIC3_SD_CTRL_ ## x)))) -+ -+#define _IPAQ_ASIC3_SD_CTRL_Cmd 0x00 -+#define _IPAQ_ASIC3_SD_CTRL_Arg0 0x08 -+#define _IPAQ_ASIC3_SD_CTRL_Arg1 0x0C -+#define _IPAQ_ASIC3_SD_CTRL_StopInternal 0x10 -+#define _IPAQ_ASIC3_SD_CTRL_TransferSectorCount 0x14 -+#define _IPAQ_ASIC3_SD_CTRL_Response0 0x18 -+#define _IPAQ_ASIC3_SD_CTRL_Response1 0x1C -+#define _IPAQ_ASIC3_SD_CTRL_Response2 0x20 -+#define _IPAQ_ASIC3_SD_CTRL_Response3 0x24 -+#define _IPAQ_ASIC3_SD_CTRL_Response4 0x28 -+#define _IPAQ_ASIC3_SD_CTRL_Response5 0x2C -+#define _IPAQ_ASIC3_SD_CTRL_Response6 0x30 -+#define _IPAQ_ASIC3_SD_CTRL_Response7 0x34 -+#define _IPAQ_ASIC3_SD_CTRL_CardStatus 0x38 -+#define _IPAQ_ASIC3_SD_CTRL_BufferCtrl 0x3C -+#define _IPAQ_ASIC3_SD_CTRL_IntMaskCard 0x40 -+#define _IPAQ_ASIC3_SD_CTRL_IntMaskBuffer 0x44 -+#define _IPAQ_ASIC3_SD_CTRL_CardClockCtrl 0x48 -+#define _IPAQ_ASIC3_SD_CTRL_MemCardXferDataLen 0x4C -+#define _IPAQ_ASIC3_SD_CTRL_MemCardOptionSetup 0x50 -+#define _IPAQ_ASIC3_SD_CTRL_ErrorStatus0 0x58 -+#define _IPAQ_ASIC3_SD_CTRL_ErrorStatus1 0x5C -+#define _IPAQ_ASIC3_SD_CTRL_DataPort 0x60 -+#define _IPAQ_ASIC3_SD_CTRL_TransactionCtrl 0x68 -+#define _IPAQ_ASIC3_SD_CTRL_SoftwareReset 0x1C0 -+ -+#define IPAQ_ASIC3_SD_CTRL_Cmd(_b) IPAQ_ASIC3_SD( _b, u16, Cmd ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Arg0(_b) IPAQ_ASIC3_SD( _b, u16, Arg0 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Arg1(_b) IPAQ_ASIC3_SD( _b, u16, Arg1 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_StopInternal(_b) IPAQ_ASIC3_SD( _b, u16, StopInternal ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_TransferSectorCount(_b) IPAQ_ASIC3_SD( _b, u16, TransferSectorCount ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response0(_b) IPAQ_ASIC3_SD( _b, u16, Response0 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response1(_b) IPAQ_ASIC3_SD( _b, u16, Response1 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response2(_b) IPAQ_ASIC3_SD( _b, u16, Response2 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response3(_b) IPAQ_ASIC3_SD( _b, u16, Response3 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response4(_b) IPAQ_ASIC3_SD( _b, u16, Response4 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response5(_b) IPAQ_ASIC3_SD( _b, u16, Response5 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response6(_b) IPAQ_ASIC3_SD( _b, u16, Response6 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_Response7(_b) IPAQ_ASIC3_SD( _b, u16, Response7 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_CardStatus(_b) IPAQ_ASIC3_SD( _b, u16, CardStatus ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_BufferCtrl(_b) IPAQ_ASIC3_SD( _b, u16, BufferCtrl ) /* and error status*/ -+#define IPAQ_ASIC3_SD_CTRL_IntMaskCard(_b) IPAQ_ASIC3_SD( _b, u16, IntMaskCard ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_IntMaskBuffer(_b) IPAQ_ASIC3_SD( _b, u16, IntMaskBuffer ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_CardClockCtrl(_b) IPAQ_ASIC3_SD( _b, u16, CardClockCtrl ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_MemCardXferDataLen(_b) IPAQ_ASIC3_SD( _b, u16, MemCardXferDataLen ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_MemCardOptionSetup(_b) IPAQ_ASIC3_SD( _b, u16, MemCardOptionSetup ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_ErrorStatus0(_b) IPAQ_ASIC3_SD( _b, u16, ErrorStatus0 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_ErrorStatus1(_b) IPAQ_ASIC3_SD( _b, u16, ErrorStatus1 ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_DataPort(_b) IPAQ_ASIC3_SD( _b, u16, DataPort ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_TransactionCtrl(_b) IPAQ_ASIC3_SD( _b, u16, TransactionCtrl ) /* */ -+#define IPAQ_ASIC3_SD_CTRL_SoftwareReset(_b) IPAQ_ASIC3_SD( _b, u16, SoftwareReset ) /* */ -+ -+#define SD_CTRL_SOFTWARE_RESET_CLEAR (1<<0) -+ -+#define SD_CTRL_TRANSACTIONCONTROL_SET (1<<8) // 0x0100 -+ -+#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD (1<<15)// 0x8000 -+#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK (1<<8) // 0x0100 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512 (1<<7) // 0x0080 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256 (1<<6) // 0x0040 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128 (1<<5) // 0x0020 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64 (1<<4) // 0x0010 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32 (1<<3) // 0x0008 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16 (1<<2) // 0x0004 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8 (1<<1) // 0x0002 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4 (1<<0) // 0x0001 -+#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2 (0<<0) // 0x0000 -+ -+#define MEM_CARD_OPTION_REQUIRED 0x000e -+#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x) (((x)&0x0f)<<4) /* Four bits */ -+#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT (1<<14) // 0x4000 -+#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1 (1<<15) // 0x8000 -+#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4 (0<<15) //~0x8000 -+ -+#define SD_CTRL_COMMAND_INDEX(x) ((x)&0x3f) /* 0=CMD0, 1=CMD1, ..., 63=CMD63 */ -+#define SD_CTRL_COMMAND_TYPE_CMD (0 << 6) -+#define SD_CTRL_COMMAND_TYPE_ACMD (1 << 6) -+#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION (2 << 6) -+#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL (0 << 8) -+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1 (4 << 8) -+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B (5 << 8) -+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2 (6 << 8) -+#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3 (7 << 8) -+#define SD_CTRL_COMMAND_DATA_PRESENT (1 << 11) -+#define SD_CTRL_COMMAND_TRANSFER_READ (1 << 12) -+#define SD_CTRL_COMMAND_TRANSFER_WRITE (0 << 12) -+#define SD_CTRL_COMMAND_MULTI_BLOCK (1 << 13) -+#define SD_CTRL_COMMAND_SECURITY_CMD (1 << 14) -+ -+#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12 (1 << 0) -+#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12 (1 << 8) -+ -+#define SD_CTRL_CARDSTATUS_RESPONSE_END (1 << 0) -+#define SD_CTRL_CARDSTATUS_RW_END (1 << 2) -+#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0 (1 << 3) -+#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0 (1 << 4) -+#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0 (1 << 5) -+#define SD_CTRL_CARDSTATUS_WRITE_PROTECT (1 << 7) -+#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3 (1 << 8) -+#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3 (1 << 9) -+#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3 (1 << 10) -+ -+#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR (1 << 0) // 0x0001 -+#define SD_CTRL_BUFFERSTATUS_CRC_ERROR (1 << 1) // 0x0002 -+#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR (1 << 2) // 0x0004 -+#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT (1 << 3) // 0x0008 -+#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW (1 << 4) // 0x0010 -+#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW (1 << 5) // 0x0020 -+#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT (1 << 6) // 0x0040 -+#define SD_CTRL_BUFFERSTATUS_UNK7 (1 << 7) // 0x0080 -+#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE (1 << 8) // 0x0100 -+#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE (1 << 9) // 0x0200 -+#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION (1 << 13)// 0x2000 -+#define SD_CTRL_BUFFERSTATUS_CMD_BUSY (1 << 14)// 0x4000 -+#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS (1 << 15)// 0x8000 -+ -+#define SD_CTRL_INTMASKCARD_RESPONSE_END (1 << 0) // 0x0001 -+#define SD_CTRL_INTMASKCARD_RW_END (1 << 2) // 0x0004 -+#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0 (1 << 3) // 0x0008 -+#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0 (1 << 4) // 0x0010 -+#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5) // 0x0020 -+#define SD_CTRL_INTMASKCARD_UNK6 (1 << 6) // 0x0040 -+#define SD_CTRL_INTMASKCARD_WRITE_PROTECT (1 << 7) // 0x0080 -+#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3 (1 << 8) // 0x0100 -+#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3 (1 << 9) // 0x0200 -+#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10)// 0x0400 -+ -+#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR (1 << 0) // 0x0001 -+#define SD_CTRL_INTMASKBUFFER_CRC_ERROR (1 << 1) // 0x0002 -+#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR (1 << 2) // 0x0004 -+#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT (1 << 3) // 0x0008 -+#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW (1 << 4) // 0x0010 -+#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW (1 << 5) // 0x0020 -+#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT (1 << 6) // 0x0040 -+#define SD_CTRL_INTMASKBUFFER_UNK7 (1 << 7) // 0x0080 -+#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE (1 << 8) // 0x0100 -+#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE (1 << 9) // 0x0200 -+#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION (1 << 13)// 0x2000 -+#define SD_CTRL_INTMASKBUFFER_CMD_BUSY (1 << 14)// 0x4000 -+#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS (1 << 15)// 0x8000 -+ -+#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR (1 << 0) // 0x0001 -+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2) // 0x0004 -+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12 (1 << 3) // 0x0008 -+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA (1 << 4) // 0x0010 -+#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS (1 << 5) // 0x0020 -+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 8) // 0x0100 -+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12 (1 << 9) // 0x0200 -+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA (1 << 10)// 0x0400 -+#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD (1 << 11)// 0x0800 -+ -+#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE (1 << 0) // 0x0001 -+#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA (1 << 4) // 0x0010 -+#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS (1 << 5) // 0x0020 -+#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY (1 << 6) // 0x0040 -+ -+#define _IPAQ_ASIC3_SDIO_CTRL_Base 0x1200 -+ -+#define IPAQ_ASIC3_SDIO(_b, s,x) \ -+ (*((volatile s *) ((_b) + _IPAQ_ASIC3_SDIO_CTRL_Base + (_IPAQ_ASIC3_SDIO_CTRL_ ## x)))) -+ -+#define _IPAQ_ASIC3_SDIO_CTRL_Cmd 0x00 -+#define _IPAQ_ASIC3_SDIO_CTRL_CardPortSel 0x04 -+#define _IPAQ_ASIC3_SDIO_CTRL_Arg0 0x08 -+#define _IPAQ_ASIC3_SDIO_CTRL_Arg1 0x0C -+#define _IPAQ_ASIC3_SDIO_CTRL_TransferBlockCount 0x14 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response0 0x18 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response1 0x1C -+#define _IPAQ_ASIC3_SDIO_CTRL_Response2 0x20 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response3 0x24 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response4 0x28 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response5 0x2C -+#define _IPAQ_ASIC3_SDIO_CTRL_Response6 0x30 -+#define _IPAQ_ASIC3_SDIO_CTRL_Response7 0x34 -+#define _IPAQ_ASIC3_SDIO_CTRL_CardStatus 0x38 -+#define _IPAQ_ASIC3_SDIO_CTRL_BufferCtrl 0x3C -+#define _IPAQ_ASIC3_SDIO_CTRL_IntMaskCard 0x40 -+#define _IPAQ_ASIC3_SDIO_CTRL_IntMaskBuffer 0x44 -+#define _IPAQ_ASIC3_SDIO_CTRL_CardXferDataLen 0x4C -+#define _IPAQ_ASIC3_SDIO_CTRL_CardOptionSetup 0x50 -+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorStatus0 0x54 -+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorStatus1 0x58 -+#define _IPAQ_ASIC3_SDIO_CTRL_DataPort 0x60 -+#define _IPAQ_ASIC3_SDIO_CTRL_TransactionCtrl 0x68 -+#define _IPAQ_ASIC3_SDIO_CTRL_CardIntCtrl 0x6C -+#define _IPAQ_ASIC3_SDIO_CTRL_ClocknWaitCtrl 0x70 -+#define _IPAQ_ASIC3_SDIO_CTRL_HostInformation 0x74 -+#define _IPAQ_ASIC3_SDIO_CTRL_ErrorCtrl 0x78 -+#define _IPAQ_ASIC3_SDIO_CTRL_LEDCtrl 0x7C -+#define _IPAQ_ASIC3_SDIO_CTRL_SoftwareReset 0x1C0 -+ -+#define IPAQ_ASIC3_SDIO_CTRL_Cmd(_b) IPAQ_ASIC3_SDIO( _b, u16, Cmd ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_CardPortSel(_b) IPAQ_ASIC3_SDIO( _b, u16, CardPortSel ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Arg0(_b) IPAQ_ASIC3_SDIO( _b, u16, Arg0 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Arg1(_b) IPAQ_ASIC3_SDIO( _b, u16, Arg1 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_TransferBlockCount(_b) IPAQ_ASIC3_SDIO( _b, u16, TransferBlockCount ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response0(_b) IPAQ_ASIC3_SDIO( _b, u16, Response0 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response1(_b) IPAQ_ASIC3_SDIO( _b, u16, Response1 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response2(_b) IPAQ_ASIC3_SDIO( _b, u16, Response2 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response3(_b) IPAQ_ASIC3_SDIO( _b, u16, Response3 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response4(_b) IPAQ_ASIC3_SDIO( _b, u16, Response4 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response5(_b) IPAQ_ASIC3_SDIO( _b, u16, Response5 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response6(_b) IPAQ_ASIC3_SDIO( _b, u16, Response6 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_Response7(_b) IPAQ_ASIC3_SDIO( _b, u16, Response7 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_CardStatus(_b) IPAQ_ASIC3_SDIO( _b, u16, CardStatus ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_BufferCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, BufferCtrl ) /* and error status*/ -+#define IPAQ_ASIC3_SDIO_CTRL_IntMaskCard(_b) IPAQ_ASIC3_SDIO( _b, u16, IntMaskCard ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_IntMaskBuffer(_b) IPAQ_ASIC3_SDIO( _b, u16, IntMaskBuffer ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_CardXferDataLen(_b) IPAQ_ASIC3_SDIO( _b, u16, CardXferDataLen ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_CardOptionSetup(_b) IPAQ_ASIC3_SDIO( _b, u16, CardOptionSetup ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_ErrorStatus0(_b) IPAQ_ASIC3_SDIO( _b, u16, ErrorStatus0 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_ErrorStatus1(_b) IPAQ_ASIC3_SDIO( _b, u16, ErrorStatus1 ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_DataPort(_b) IPAQ_ASIC3_SDIO( _b, u16, DataPort ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_TransactionCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, TransactionCtrl ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_CardIntCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, CardIntCtrl ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_ClocknWaitCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, ClocknWaitCtrl ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_HostInformation(_b) IPAQ_ASIC3_SDIO( _b, u16, HostInformation ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_ErrorCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, ErrorCtrl ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_LEDCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, LEDCtrl ) /* */ -+#define IPAQ_ASIC3_SDIO_CTRL_SoftwareReset(_b) IPAQ_ASIC3_SDIO( _b, u16, SoftwareReset ) /* */ -+ -+#define IPAQ_ASIC3_MAP_SIZE 0x2000 -+ -+#endif -Index: linux-2.6.23/include/linux/gpiodev.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/linux/gpiodev.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,44 @@ -+#ifndef __GPIODEV_H -+#define __GPIODEV_H -+ -+#include -+#include -+#include -+ -+/* Interface */ -+ -+/* This structure must be first member of device platform_data structure -+ of a device which provides gpiodev interface. All method pointers -+ must be non-NULL, so stubs must be used for non-implemented ones. */ -+struct gpiodev_ops { -+ int (*get)(struct device *this, unsigned gpio_no); -+ void (*set)(struct device *this, unsigned gpio_no, int val); -+ int (*to_irq)(struct device *this, unsigned gpio_no); -+}; -+ -+/* Generalized GPIO structure */ -+ -+struct gpio { -+ struct device *gpio_dev; -+ unsigned gpio_no; -+}; -+ -+/* API functions */ -+ -+static inline int gpiodev_get_value(struct gpio *gpio) -+{ -+ struct gpiodev_ops *ops = gpio->gpio_dev->platform_data; -+ return ops->get(gpio->gpio_dev, gpio->gpio_no); -+} -+static inline void gpiodev_set_value(struct gpio *gpio, int val) -+{ -+ struct gpiodev_ops *ops = gpio->gpio_dev->platform_data; -+ ops->set(gpio->gpio_dev, gpio->gpio_no, val); -+} -+static inline int gpiodev_to_irq(struct gpio *gpio) -+{ -+ struct gpiodev_ops *ops = gpio->gpio_dev->platform_data; -+ return ops->to_irq(gpio->gpio_dev, gpio->gpio_no); -+} -+ -+#endif /* __GPIODEV_H */ -Index: linux-2.6.23/include/linux/input_pda.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/linux/input_pda.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,47 @@ -+#ifndef _INPUT_PDA_H -+#define _INPUT_PDA_H -+ -+/* -+ * This is temporary virtual button key codes map -+ * for keyboardless handheld computers. -+ * Its purpose is to provide map common to all devices -+ * and known to work with current software and its bugs -+ * and misfeatures. Once issues with the software are -+ * solved, codes from input.h will be used directly -+ * (missing key definitions will be added). -+ */ -+ -+/* Some directly usable keycodes: -+KEY_POWER - Power/suspend button -+KEY_ENTER - Enter/Action/Central button on joypad -+KEY_UP -+KEY_DOWN -+KEY_LEFT -+KEY_RIGHT -+*/ -+ -+/* XXX Instead of using any values in include/linux/input.h, we have to use -+ use values < 128 due to some munging that kdrive does to get keystrokes. -+ When kdrive gets its key events from evdev instead of the console, -+ we should be able to switch to using input.h values and get rid of -+ xmodmap. */ -+ -+#define _KEY_APP1 KEY_F9 // xmodmap sees 67 + 8 = 75 -+#define _KEY_APP2 KEY_F10 // xmodmap 76 -+#define _KEY_APP3 KEY_F11 // xmodmap 95 -+#define _KEY_APP4 KEY_F12 // xmodmap 96 -+ -+#define _KEY_RECORD KEY_RO -+ -+/* It is highly recommended to use exactly 4 codes above for -+ 4 buttons the device has. This will ensure that console and -+ framebuffer applications (e.g. games) will work ok on all -+ devices. If you'd like more distinguishable names, following -+ convenience defines are provided, suiting many devices. */ -+ -+#define _KEY_CALENDAR _KEY_APP1 -+#define _KEY_CONTACTS _KEY_APP2 -+#define _KEY_MAIL _KEY_APP3 -+#define _KEY_HOMEPAGE _KEY_APP4 -+ -+#endif -Index: linux-2.6.23/include/linux/soc/asic3_base.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/linux/soc/asic3_base.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,104 @@ -+#include -+#include -+ -+/* Private API - for ASIC3 devices internal use only */ -+#define HDR_IPAQ_ASIC3_ACTION(ACTION,action,fn,FN) \ -+u32 asic3_get_gpio_ ## action ## _ ## fn (struct device *dev); \ -+void asic3_set_gpio_ ## action ## _ ## fn (struct device *dev, u32 bits, u32 val); -+ -+#define HDR_IPAQ_ASIC3_FN(fn,FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( MASK,mask,fn,FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( DIR, dir, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( OUT, out, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( LEVELTRI, trigtype, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( RISING, rising, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( LEVEL, triglevel, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( SLEEP_MASK, sleepmask, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( SLEEP_OUT, sleepout, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( BATT_FAULT_OUT, battfaultout, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( INT_STATUS, intstatus, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( ALT_FUNCTION, alt_fn, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( SLEEP_CONF, sleepconf, fn, FN) \ -+ HDR_IPAQ_ASIC3_ACTION ( STATUS, status, fn, FN) -+ -+/* Public API */ -+ -+#define ASIC3_GPIOA_IRQ_BASE 0 -+#define ASIC3_GPIOB_IRQ_BASE 16 -+#define ASIC3_GPIOC_IRQ_BASE 32 -+#define ASIC3_GPIOD_IRQ_BASE 48 -+#define ASIC3_LED0_IRQ 64 -+#define ASIC3_LED1_IRQ 65 -+#define ASIC3_LED2_IRQ 66 -+#define ASIC3_SPI_IRQ 67 -+#define ASIC3_SMBUS_IRQ 68 -+#define ASIC3_OWM_IRQ 69 -+ -+#define ASIC3_NR_GPIO_IRQS 64 /* 16 bits each GPIO A...D banks */ -+#define ASIC3_NR_IRQS (ASIC3_OWM_IRQ + 1) -+ -+extern int asic3_irq_base(struct device *dev); -+ -+extern void asic3_write_register(struct device *dev, unsigned int reg, -+ u32 value); -+extern u32 asic3_read_register(struct device *dev, unsigned int reg); -+ -+/* old clock api */ -+extern void asic3_set_clock_sel(struct device *dev, u32 bits, u32 val); -+extern u32 asic3_get_clock_cdex(struct device *dev); -+extern void asic3_set_clock_cdex(struct device *dev, u32 bits, u32 val); -+ -+extern void asic3_set_extcf_select(struct device *dev, u32 bits, u32 val); -+extern void asic3_set_extcf_reset(struct device *dev, u32 bits, u32 val); -+extern void asic3_set_sdhwctrl(struct device *dev, u32 bits, u32 val); -+ -+extern void asic3_set_led(struct device *dev, int led_num, int duty_time, -+ int cycle_time, int timebase); -+ -+extern int asic3_register_mmc(struct device *dev); -+extern int asic3_unregister_mmc(struct device *dev); -+ -+/* Accessors for GPIO banks */ -+HDR_IPAQ_ASIC3_FN(a, A) -+HDR_IPAQ_ASIC3_FN(b, B) -+HDR_IPAQ_ASIC3_FN(c, C) -+HDR_IPAQ_ASIC3_FN(d, D) -+ -+#define _IPAQ_ASIC3_GPIO_BANK_A 0 -+#define _IPAQ_ASIC3_GPIO_BANK_B 1 -+#define _IPAQ_ASIC3_GPIO_BANK_C 2 -+#define _IPAQ_ASIC3_GPIO_BANK_D 3 -+ -+#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf)) -+ -+extern int asic3_get_gpio_bit(struct device *dev, int gpio); -+extern void asic3_set_gpio_bit(struct device *dev, int gpio, int val); -+extern int asic3_gpio_get_value(struct device *dev, unsigned gpio); -+extern void asic3_gpio_set_value(struct device *dev, unsigned gpio, int val); -+ -+ -+struct tmio_mmc_hwconfig; -+ -+struct asic3_platform_data -+{ -+ // Must be first member -+ struct gpiodev_ops gpiodev_ops; -+ -+ struct { -+ u32 dir; -+ u32 init; -+ u32 sleep_mask; -+ u32 sleep_out; -+ u32 batt_fault_out; -+ u32 sleep_conf; -+ u32 alt_function; -+ } gpio_a, gpio_b, gpio_c, gpio_d; -+ -+ int irq_base; -+ unsigned int bus_shift; -+ -+ struct platform_device **child_platform_devs; -+ int num_child_platform_devs; -+ -+ struct tmio_mmc_hwconfig *tmio_mmc_hwconfig; -+}; -Index: linux-2.6.23/include/linux/soc/tmio_mmc.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/linux/soc/tmio_mmc.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,17 @@ -+#include -+ -+#define MMC_CLOCK_DISABLED 0 -+#define MMC_CLOCK_ENABLED 1 -+ -+#define TMIO_WP_ALWAYS_RW ((void*)-1) -+ -+struct tmio_mmc_hwconfig { -+ void (*hwinit)(struct platform_device *sdev); -+ void (*set_mmc_clock)(struct platform_device *sdev, int state); -+ -+ /* NULL - use ASIC3 signal, -+ TMIO_WP_ALWAYS_RW - assume always R/W (e.g. miniSD) -+ otherwise - machine-specific handler */ -+ int (*mmc_get_ro)(struct platform_device *pdev); -+ short address_shift; -+}; -Index: linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h -=================================================================== ---- linux-2.6.23.orig/include/asm-arm/arch-pxa/pxa-regs.h 2008-01-20 18:59:40.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h 2008-01-20 18:59:46.000000000 +0000 -@@ -2058,6 +2058,8 @@ - #define LDCMD_SOFINT (1 << 22) - #define LDCMD_EOFINT (1 << 21) - -+#define LCCR4_13M_PCD_EN (1<<25) /* 13M PCD enable */ -+#define LCCR4_PCDDIV (1<<31) /* PCD selection */ - - #define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ - #define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ -Index: linux-2.6.23/drivers/mmc/host/Kconfig -=================================================================== ---- linux-2.6.23.orig/drivers/mmc/host/Kconfig 2008-01-20 18:59:18.000000000 +0000 -+++ linux-2.6.23/drivers/mmc/host/Kconfig 2008-01-20 18:59:46.000000000 +0000 -@@ -130,3 +130,9 @@ config MMC_SPI - - If unsure, or if your system has no SPI master driver, say N. - -+config MMC_ASIC3 -+ tristate "HTC ASIC3 SD/MMC support" -+ depends on MMC && HTC_ASIC3 -+ help -+ This provides support for the ASIC3 SD/MMC controller, used -+ in the iPAQ hx4700 and others. -Index: linux-2.6.23/drivers/mmc/host/Makefile -=================================================================== ---- linux-2.6.23.orig/drivers/mmc/host/Makefile 2008-01-20 18:59:18.000000000 +0000 -+++ linux-2.6.23/drivers/mmc/host/Makefile 2008-01-20 21:12:10.000000000 +0000 -@@ -13,6 +13,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o - obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o - obj-$(CONFIG_MMC_WBSD) += wbsd.o - obj-$(CONFIG_MMC_AU1X) += au1xmmc.o -+obj-$(CONFIG_MMC_ASIC3) += asic3_mmc.o - obj-$(CONFIG_MMC_OMAP) += omap.o - obj-$(CONFIG_MMC_AT91) += at91_mci.o - obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o -Index: linux-2.6.23/drivers/mmc/host/asic3_mmc.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/mmc/host/asic3_mmc.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,900 @@ -+/* Note that this driver can likely be merged into the tmio driver, so -+ * consider this code temporary. It works, though. -+ */ -+/* -+ * linux/drivers/mmc/asic3_mmc.c -+ * -+ * Copyright (c) 2005 SDG Systems, LLC -+ * -+ * based on tmio_mmc.c -+ * Copyright (C) 2004 Ian Molton -+ * -+ * Refactored to support all ASIC3 devices, 2006 Paul Sokolovsky -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * Driver for the SD / SDIO cell found in: -+ * -+ * TC6393XB -+ * -+ * This driver draws mainly on scattered spec sheets, Reverse engineering -+ * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit -+ * support). -+ * -+ * Supports MMC 1 bit transfers and SD 1 and 4 bit modes. -+ * -+ * TODO: -+ * Eliminate FIXMEs -+ * SDIO support -+ * Power management -+ * Handle MMC errors (at all) -+ * -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+//#include -+#include -+#include -+//#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include "asic3_mmc.h" -+ -+struct asic3_mmc_host { -+ void *ctl_base; -+ struct device *asic3_dev; /* asic3 device */ -+ struct tmio_mmc_hwconfig *hwconfig; /* HW config data/handlers, guaranteed != NULL */ -+ unsigned long bus_shift; -+ struct mmc_command *cmd; -+ struct mmc_request *mrq; -+ struct mmc_data *data; -+ struct mmc_host *mmc; -+ int irq; -+ unsigned short clock_for_sd; -+ -+ /* I/O related stuff */ -+ struct scatterlist *sg_ptr; -+ unsigned int sg_len; -+ unsigned int sg_off; -+}; -+ -+static void -+mmc_finish_request(struct asic3_mmc_host *host) -+{ -+ struct mmc_request *mrq = host->mrq; -+ -+ /* Write something to end the command */ -+ host->mrq = NULL; -+ host->cmd = NULL; -+ host->data = NULL; -+ -+ mmc_request_done(host->mmc, mrq); -+} -+ -+ -+#define ASIC3_MMC_REG(host, block, reg) (*((volatile u16 *) ((host->ctl_base) + ((_IPAQ_ASIC3_## block ## _Base + _IPAQ_ASIC3_ ## block ## _ ## reg) >> (2 - host->bus_shift))) )) -+ -+static void -+mmc_start_command(struct asic3_mmc_host *host, struct mmc_command *cmd) -+{ -+ struct mmc_data *data = host->data; -+ int c = cmd->opcode; -+ -+ DBG("Opcode: %d, base: %p\n", cmd->opcode, host->ctl_base); -+ -+ if(cmd->opcode == MMC_STOP_TRANSMISSION) { -+ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12; -+ cmd->resp[0] = cmd->opcode; -+ cmd->resp[1] = 0; -+ cmd->resp[2] = 0; -+ cmd->resp[3] = 0; -+ cmd->resp[4] = 0; -+ return; -+ } -+ -+ switch(cmd->flags & 0x1f) { -+ case MMC_RSP_NONE: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL; break; -+ case MMC_RSP_R1: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1; break; -+ case MMC_RSP_R1B: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B; break; -+ case MMC_RSP_R2: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2; break; -+ case MMC_RSP_R3: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3; break; -+ default: -+ DBG("Unknown response type %d\n", cmd->flags & 0x1f); -+ break; -+ } -+ -+ host->cmd = cmd; -+ -+ if(cmd->opcode == MMC_APP_CMD) { -+ c |= APP_CMD; -+ } -+ if (cmd->opcode == MMC_GO_IDLE_STATE) { -+ c |= (3 << 8); /* This was removed from ipaq-asic3.h for some reason */ -+ } -+ if(data) { -+ c |= SD_CTRL_COMMAND_DATA_PRESENT; -+ if(data->blocks > 1) { -+ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12; -+ c |= SD_CTRL_COMMAND_MULTI_BLOCK; -+ } -+ if(data->flags & MMC_DATA_READ) { -+ c |= SD_CTRL_COMMAND_TRANSFER_READ; -+ } -+ /* MMC_DATA_WRITE does not require a bit to be set */ -+ } -+ -+ /* Enable the command and data interrupts */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( -+ SD_CTRL_INTMASKCARD_RESPONSE_END -+ | SD_CTRL_INTMASKCARD_RW_END -+ | SD_CTRL_INTMASKCARD_CARD_REMOVED_0 -+ | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 -+#if 0 -+ | SD_CTRL_INTMASKCARD_CARD_REMOVED_3 -+ | SD_CTRL_INTMASKCARD_CARD_INSERTED_3 -+#endif -+ ); -+ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) = ~( -+ SD_CTRL_INTMASKBUFFER_UNK7 -+ | SD_CTRL_INTMASKBUFFER_CMD_BUSY -+#if 0 -+ | SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR -+ | SD_CTRL_INTMASKBUFFER_CRC_ERROR -+ | SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR -+ | SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT -+ | SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW -+ | SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW -+ | SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT -+ | SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE -+ | SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE -+ | SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS -+#endif -+ ); -+ -+ /* Send the command */ -+ ASIC3_MMC_REG(host, SD_CTRL, Arg1) = cmd->arg >> 16; -+ ASIC3_MMC_REG(host, SD_CTRL, Arg0) = cmd->arg & 0xffff; -+ ASIC3_MMC_REG(host, SD_CTRL, Cmd) = c; -+} -+ -+/* This chip always returns (at least?) as much data as you ask for. I'm -+ * unsure what happens if you ask for less than a block. This should be looked -+ * into to ensure that a funny length read doesnt mess up the controller data -+ * state machine. -+ * -+ * Aric: Statement above may not apply to ASIC3. -+ * -+ * FIXME - this chip cannot do 1 and 2 byte data requests in 4 bit mode -+ * -+ * Aric: Statement above may not apply to ASIC3. -+ */ -+ -+static struct tasklet_struct mmc_data_read_tasklet; -+ -+static void -+mmc_data_transfer(unsigned long h) -+{ -+ struct asic3_mmc_host *host = (struct asic3_mmc_host *)h; -+ struct mmc_data *data = host->data; -+ unsigned short *buf; -+ int count; -+ /* unsigned long flags; */ -+ -+ if(!data){ -+ printk(KERN_WARNING DRIVER_NAME ": Spurious Data IRQ\n"); -+ return; -+ } -+ -+ /* local_irq_save(flags); */ -+ /* buf = kmap_atomic(host->sg_ptr->page, KM_BIO_SRC_IRQ); */ -+ buf = kmap(host->sg_ptr->page); -+ buf += host->sg_ptr->offset/2 + host->sg_off/2; -+ -+ /* -+ * Ensure we dont read more than one block. The chip will interrupt us -+ * When the next block is available. -+ */ -+ count = host->sg_ptr->length - host->sg_off; -+ if(count > data->blksz) { -+ count = data->blksz; -+ } -+ -+ DBG("count: %08x, page: %p, offset: %08x flags %08x\n", -+ count, host->sg_ptr->page, host->sg_off, data->flags); -+ -+ host->sg_off += count; -+ -+ /* Transfer the data */ -+ if(data->flags & MMC_DATA_READ) { -+ while(count > 0) { -+ /* Read two bytes from SD/MMC controller. */ -+ *buf = ASIC3_MMC_REG(host, SD_CTRL, DataPort); -+ buf++; -+ count -= 2; -+ } -+ //flush_dcache_page(host->sg_ptr->page); -+ } else { -+ while(count > 0) { -+ /* Write two bytes to SD/MMC controller. */ -+ ASIC3_MMC_REG(host, SD_CTRL, DataPort) = *buf; -+ buf++; -+ count -= 2; -+ } -+ } -+ -+ /* kunmap_atomic(host->sg_ptr->page, KM_BIO_SRC_IRQ); */ -+ kunmap(host->sg_ptr->page); -+ /* local_irq_restore(flags); */ -+ if(host->sg_off == host->sg_ptr->length) { -+ host->sg_ptr++; -+ host->sg_off = 0; -+ --host->sg_len; -+ } -+ -+ return; -+} -+ -+static void -+mmc_data_end_irq(struct asic3_mmc_host *host) -+{ -+ struct mmc_data *data = host->data; -+ -+ host->data = NULL; -+ -+ if(!data){ -+ printk(KERN_WARNING DRIVER_NAME ": Spurious data end IRQ\n"); -+ return; -+ } -+ -+ if (data->error == MMC_ERR_NONE) { -+ data->bytes_xfered = data->blocks * data->blksz; -+ } else { -+ data->bytes_xfered = 0; -+ } -+ -+ DBG("Completed data request\n"); -+ -+ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = 0; -+ -+ /* Make sure read enable interrupt and write enable interrupt are disabled */ -+ if(data->flags & MMC_DATA_READ) { -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) |= SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE; -+ } else { -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) |= SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE; -+ } -+ -+ mmc_finish_request(host); -+} -+ -+static void -+mmc_cmd_irq(struct asic3_mmc_host *host, unsigned int buffer_stat) -+{ -+ struct mmc_command *cmd = host->cmd; -+ u8 *buf = (u8 *)cmd->resp; -+ u16 data; -+ -+ if(!host->cmd) { -+ printk(KERN_WARNING DRIVER_NAME ": Spurious CMD irq\n"); -+ return; -+ } -+ -+ host->cmd = NULL; -+ if(cmd->flags & MMC_RSP_PRESENT && cmd->flags & MMC_RSP_136) { -+ /* R2 */ -+ buf[12] = 0xff; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response0); -+ buf[13] = data & 0xff; -+ buf[14] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response1); -+ buf[15] = data & 0xff; -+ buf[8] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response2); -+ buf[9] = data & 0xff; -+ buf[10] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response3); -+ buf[11] = data & 0xff; -+ buf[4] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response4); -+ buf[5] = data & 0xff; -+ buf[6] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response5); -+ buf[7] = data & 0xff; -+ buf[0] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response6); -+ buf[1] = data & 0xff; -+ buf[2] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response7); -+ buf[3] = data & 0xff; -+ } else if(cmd->flags & MMC_RSP_PRESENT) { -+ /* R1, R1B, R3 */ -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response0); -+ buf[0] = data & 0xff; -+ buf[1] = data >> 8; -+ data = ASIC3_MMC_REG(host, SD_CTRL, Response1); -+ buf[2] = data & 0xff; -+ buf[3] = data >> 8; -+ } -+ DBG("Response: %08x %08x %08x %08x\n", cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); -+ -+ if(buffer_stat & SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT) { -+ cmd->error = MMC_ERR_TIMEOUT; -+ } else if((buffer_stat & SD_CTRL_BUFFERSTATUS_CRC_ERROR) && (cmd->flags & MMC_RSP_CRC)) { -+ cmd->error = MMC_ERR_BADCRC; -+ } else if(buffer_stat & -+ ( -+ SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS -+ | SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR -+ | SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR -+ | SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW -+ | SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW -+ | SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT -+ ) -+ ) { -+ DBG("Buffer status ERROR 0x%04x - inside check buffer\n", buffer_stat); -+ DBG("detail0 error status 0x%04x\n", ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus0)); -+ DBG("detail1 error status 0x%04x\n", ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus1)); -+ cmd->error = MMC_ERR_FAILED; -+ } -+ -+ if(cmd->error == MMC_ERR_NONE) { -+ switch (cmd->opcode) { -+ case SD_APP_SET_BUS_WIDTH: -+ if(cmd->arg == SD_BUS_WIDTH_4) { -+ host->clock_for_sd = SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD; -+ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = -+ MEM_CARD_OPTION_REQUIRED -+ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) -+ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT -+ | MEM_CARD_OPTION_DATA_XFR_WIDTH_4; -+ } else { -+ host->clock_for_sd = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = -+ MEM_CARD_OPTION_REQUIRED -+ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) -+ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT -+ | MEM_CARD_OPTION_DATA_XFR_WIDTH_1; -+ } -+ break; -+ case MMC_SELECT_CARD: -+ if((cmd->arg >> 16) == 0) { -+ /* We have been deselected. */ -+ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = -+ MEM_CARD_OPTION_REQUIRED -+ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) -+ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT -+ | MEM_CARD_OPTION_DATA_XFR_WIDTH_1; -+ } -+ } -+ } -+ -+ /* -+ * If there is data to handle we enable data IRQs here, and we will -+ * ultimatley finish the request in the mmc_data_end_irq handler. -+ */ -+ if(host->data && (cmd->error == MMC_ERR_NONE)){ -+ if(host->data->flags & MMC_DATA_READ) { -+ /* Enable the read enable interrupt */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= -+ ~SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE; -+ } else { -+ /* Enable the write enable interrupt */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= -+ ~SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE; -+ } -+ } else { -+ /* There's no data, or we encountered an error, so finish now. */ -+ mmc_finish_request(host); -+ } -+ -+ return; -+} -+ -+static void hwinit2_irqsafe(struct asic3_mmc_host *host); -+ -+static irqreturn_t -+mmc_irq(int irq, void *irq_desc) -+{ -+ struct asic3_mmc_host *host; -+ unsigned int breg, bmask, bstatus, creg, cmask, cstatus; -+ -+ host = irq_desc; -+ -+ /* asic3 bstatus has errors */ -+ bstatus = ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl); -+ bmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer); -+ cstatus = ASIC3_MMC_REG(host, SD_CTRL, CardStatus); -+ cmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard); -+ breg = bstatus & ~bmask & ~DONT_CARE_BUFFER_BITS; -+ creg = cstatus & ~cmask & ~DONT_CARE_CARD_BITS; -+ -+ if (!breg && !creg) { -+ /* This occurs sometimes for no known reason. It doesn't hurt -+ * anything, so I don't print it. */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= ~breg; -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) &= ~creg; -+ goto out; -+ } -+ -+ while (breg || creg) { -+ -+ /* XXX TODO: Need to handle errors in breg here. */ -+ -+ /* -+ * Card insert/remove. The mmc controlling code is stateless. That -+ * is, it doesn't care if it was an insert or a remove. It treats -+ * both the same. -+ */ -+ /* XXX Asic3 has _3 versions of these status bits, too, for a second slot, perhaps? */ -+ if (creg & (SD_CTRL_CARDSTATUS_CARD_INSERTED_0 | SD_CTRL_CARDSTATUS_CARD_REMOVED_0)) { -+ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= -+ ~(SD_CTRL_CARDSTATUS_CARD_REMOVED_0 | SD_CTRL_CARDSTATUS_CARD_INSERTED_0); -+ if(creg & SD_CTRL_CARDSTATUS_CARD_INSERTED_0) { -+ hwinit2_irqsafe(host); -+ } -+ mmc_detect_change(host->mmc,1); -+ } -+ -+ /* Command completion */ -+ if (creg & SD_CTRL_CARDSTATUS_RESPONSE_END) { -+ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= -+ ~(SD_CTRL_CARDSTATUS_RESPONSE_END); -+ mmc_cmd_irq(host, bstatus); -+ } -+ -+ /* Data transfer */ -+ if (breg & (SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE | SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE)) { -+ ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) &= -+ ~(SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE | SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE); -+ tasklet_schedule(&mmc_data_read_tasklet); -+ } -+ -+ /* Data transfer completion */ -+ if (creg & SD_CTRL_CARDSTATUS_RW_END) { -+ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= ~(SD_CTRL_CARDSTATUS_RW_END); -+ mmc_data_end_irq(host); -+ } -+ -+ /* Check status - keep going until we've handled it all */ -+ bstatus = ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl); -+ bmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer); -+ cstatus = ASIC3_MMC_REG(host, SD_CTRL, CardStatus); -+ cmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard); -+ breg = bstatus & ~bmask & ~DONT_CARE_BUFFER_BITS; -+ creg = cstatus & ~cmask & ~DONT_CARE_CARD_BITS; -+ } -+ -+out: -+ /* Ensure all interrupt sources are cleared */ -+ ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) = 0; -+ return IRQ_HANDLED; -+} -+ -+static void -+mmc_start_data(struct asic3_mmc_host *host, struct mmc_data *data) -+{ -+ DBG("setup data transfer: blocksize %08x nr_blocks %d, page: %08x, offset: %08x\n", data->blksz, -+ data->blocks, (int)data->sg->page, data->sg->offset); -+ -+ host->sg_len = data->sg_len; -+ host->sg_ptr = data->sg; -+ host->sg_off = 0; -+ host->data = data; -+ -+ /* Set transfer length and blocksize */ -+ ASIC3_MMC_REG(host, SD_CTRL, TransferSectorCount) = data->blocks; -+ ASIC3_MMC_REG(host, SD_CTRL, MemCardXferDataLen) = data->blksz; -+} -+ -+/* Process requests from the MMC layer */ -+static void -+mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) -+{ -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ -+ WARN_ON(host->mrq != NULL); -+ -+ host->mrq = mrq; -+ -+ /* If we're performing a data request we need to setup some -+ extra information */ -+ if(mrq->data) { -+ mmc_start_data(host, mrq->data); -+ } -+ -+ mmc_start_command(host, mrq->cmd); -+} -+ -+/* Set MMC clock / power. -+ * Note: This controller uses a simple divider scheme therefore it cannot run -+ * a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as MMC -+ * wont run that fast, it has to be clocked at 12MHz which is the next slowest -+ * setting. This is likely not an issue because we are doing single 16-bit -+ * writes for data I/O. -+ */ -+static void -+mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -+{ -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ u32 clk = 0; -+ -+ DBG("clock %uHz busmode %u powermode %u Vdd %u\n", -+ ios->clock, ios->bus_mode, ios->power_mode, ios->vdd); -+ -+ if (ios->clock) { -+ clk = 0x80; /* slowest by default */ -+ if(ios->clock >= 24000000 / 256) clk >>= 1; -+ if(ios->clock >= 24000000 / 128) clk >>= 1; -+ if(ios->clock >= 24000000 / 64) clk >>= 1; -+ if(ios->clock >= 24000000 / 32) clk >>= 1; -+ if(ios->clock >= 24000000 / 16) clk >>= 1; -+ if(ios->clock >= 24000000 / 8) clk >>= 1; -+ if(ios->clock >= 24000000 / 4) clk >>= 1; -+ if(ios->clock >= 24000000 / 2) clk >>= 1; -+ if(ios->clock >= 24000000 / 1) clk >>= 1; -+ if(clk == 0) { /* For fastest speed we disable the divider. */ -+ ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 0; -+ } else { -+ ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 1; -+ } -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = -+ host->clock_for_sd -+ | SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK -+ | clk; -+ msleep(10); -+ } else { -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; -+ } -+ -+ switch (ios->power_mode) { -+ case MMC_POWER_OFF: -+ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = 0; -+ msleep(1); -+ break; -+ case MMC_POWER_UP: -+ break; -+ case MMC_POWER_ON: -+ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = SD_CONFIG_POWER1_PC_33V; -+ msleep(20); -+ break; -+ } -+} -+ -+static int -+mmc_get_ro(struct mmc_host *mmc) -+{ -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ -+ /* Call custom handler for RO status */ -+ if(host->hwconfig->mmc_get_ro) { -+ /* Special case for cards w/o WP lock (like miniSD) */ -+ if (host->hwconfig->mmc_get_ro == (void*)-1) { -+ return 0; -+ } else { -+ struct platform_device *pdev = to_platform_device(mmc_dev(mmc)); -+ return host->hwconfig->mmc_get_ro(pdev); -+ } -+ } -+ -+ /* WRITE_PROTECT is active low */ -+ return (ASIC3_MMC_REG(host, SD_CTRL, CardStatus) & SD_CTRL_CARDSTATUS_WRITE_PROTECT)?0:1; -+} -+ -+static struct mmc_host_ops mmc_ops = { -+ .request = mmc_request, -+ .set_ios = mmc_set_ios, -+ .get_ro = mmc_get_ro, -+}; -+ -+static void -+hwinit2_irqsafe(struct asic3_mmc_host *host) -+{ -+ ASIC3_MMC_REG(host, SD_CONFIG, Addr1) = 0x0000; -+ ASIC3_MMC_REG(host, SD_CONFIG, Addr0) = 0x0800; -+ -+ ASIC3_MMC_REG(host, SD_CONFIG, ClkStop) = SD_CONFIG_CLKSTOP_ENABLE_ALL; -+ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_CardDetect) = 2; -+ ASIC3_MMC_REG(host, SD_CONFIG, Command) = SD_CONFIG_COMMAND_MAE; -+ -+ ASIC3_MMC_REG(host, SD_CTRL, SoftwareReset) = 0; /* reset on */ -+ mdelay(2); -+ -+ ASIC3_MMC_REG(host, SD_CTRL, SoftwareReset) = 1; /* reset off */ -+ mdelay(2); -+ -+ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = -+ MEM_CARD_OPTION_REQUIRED -+ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) -+ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT -+ | MEM_CARD_OPTION_DATA_XFR_WIDTH_1 -+ ; -+ host->clock_for_sd = 0; -+ -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus0) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus1) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = 0; -+ -+ ASIC3_MMC_REG(host, SDIO_CTRL, ClocknWaitCtrl) = 0x100; -+ /* *((unsigned short *)(((char *)host->ctl_base) + 0x938)) = 0x100; */ -+ -+ ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 0; -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; -+ -+ mdelay(1); -+ -+ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( -+ SD_CTRL_INTMASKCARD_RESPONSE_END -+ | SD_CTRL_INTMASKCARD_RW_END -+ | SD_CTRL_INTMASKCARD_CARD_REMOVED_0 -+ | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 -+#if 0 -+ | SD_CTRL_INTMASKCARD_CARD_REMOVED_3 -+ | SD_CTRL_INTMASKCARD_CARD_INSERTED_3 -+#endif -+ ) -+ ; /* check */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) = 0xffff; /* IRQs off */ -+ -+ /* -+ * ASIC3_MMC_REG(host, SD_CTRL, TransactionCtrl) = SD_CTRL_TRANSACTIONCONTROL_SET; -+ * Wince has 0x1000 -+ */ -+ /* ASIC3_MMC_REG(host, SD_CTRL, TransactionCtrl) = 0x1000; */ -+ -+ -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SDPWR, ASIC3_SDHWCTRL_SDPWR); /* turn on power at controller(?) */ -+ -+} -+ -+static void -+hwinit(struct asic3_mmc_host *host, struct platform_device *pdev) -+{ -+ /* Call custom handler for enabling clock (if needed) */ -+ if(host->hwconfig->set_mmc_clock) -+ host->hwconfig->set_mmc_clock(pdev, MMC_CLOCK_ENABLED); -+ -+ /* Not sure if it must be done bit by bit, but leaving as-is */ -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_LEVCD, ASIC3_SDHWCTRL_LEVCD); -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_LEVWP, ASIC3_SDHWCTRL_LEVWP); -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, 0); -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_PCLR, 0); -+ -+ asic3_set_clock_cdex (host->asic3_dev, -+ CLOCK_CDEX_EX1 | CLOCK_CDEX_EX0, CLOCK_CDEX_EX1 | CLOCK_CDEX_EX0); -+ msleep(1); -+ -+ asic3_set_clock_sel (host->asic3_dev, -+ CLOCK_SEL_SD_HCLK_SEL | CLOCK_SEL_SD_BCLK_SEL, -+ CLOCK_SEL_SD_HCLK_SEL | 0); /* ? */ -+ -+ asic3_set_clock_cdex (host->asic3_dev, -+ CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS, -+ CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS); -+ msleep(1); -+ -+ asic3_set_extcf_select(host->asic3_dev, ASIC3_EXTCF_SD_MEM_ENABLE, ASIC3_EXTCF_SD_MEM_ENABLE); -+ -+ /* Long Delay */ -+ if( !machine_is_h4700()) -+ msleep(500); -+ -+ hwinit2_irqsafe(host); -+} -+ -+#ifdef CONFIG_PM -+static int -+mmc_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(pdev); -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ int ret; -+ -+ ret = mmc_suspend_host(mmc, state); -+ -+ if (ret) { -+ printk(KERN_ERR DRIVER_NAME ": Could not suspend MMC host, hardware not suspended"); -+ return ret; -+ } -+ -+ /* disable the card insert / remove interrupt while sleeping */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( -+ SD_CTRL_INTMASKCARD_RESPONSE_END -+ | SD_CTRL_INTMASKCARD_RW_END); -+ -+ /* disable clock */ -+ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; -+ ASIC3_MMC_REG(host, SD_CONFIG, ClkStop) = 0; -+ -+ /* power down */ -+ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = 0; -+ -+ asic3_set_clock_cdex (host->asic3_dev, -+ CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS, 0); -+ -+ /* disable core clock */ -+ if(host->hwconfig->set_mmc_clock) -+ host->hwconfig->set_mmc_clock(pdev, MMC_CLOCK_DISABLED); -+ -+ /* Put in suspend mode */ -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, ASIC3_SDHWCTRL_SUSPEND); -+ return 0; -+} -+ -+static int -+mmc_resume(struct platform_device *pdev) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(pdev); -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ -+ printk(KERN_INFO "%s: starting resume\n", DRIVER_NAME); -+ -+ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, 0); -+ hwinit(host, pdev); -+ -+ /* re-enable card remove / insert interrupt */ -+ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( -+ SD_CTRL_INTMASKCARD_RESPONSE_END -+ | SD_CTRL_INTMASKCARD_RW_END -+ | SD_CTRL_INTMASKCARD_CARD_REMOVED_0 -+ | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 ); -+ -+ mmc_resume_host(mmc); -+ -+ printk(KERN_INFO "%s: finished resume\n", DRIVER_NAME); -+ return 0; -+} -+#endif -+ -+static int -+mmc_probe(struct platform_device *pdev) -+{ -+ struct mmc_host *mmc; -+ struct asic3_mmc_host *host = NULL; -+ int retval = 0; -+ struct tmio_mmc_hwconfig *mmc_config = (struct tmio_mmc_hwconfig *)pdev->dev.platform_data; -+ -+ /* bus_shift is mandatory */ -+ if (!mmc_config) { -+ printk(KERN_ERR DRIVER_NAME ": Invalid configuration\n"); -+ return -EINVAL; -+ } -+ -+ mmc = mmc_alloc_host(sizeof(struct asic3_mmc_host) + 128, &pdev->dev); -+ if (!mmc) { -+ retval = -ENOMEM; -+ goto exceptional_return; -+ } -+ -+ host = mmc_priv(mmc); -+ host->mmc = mmc; -+ platform_set_drvdata(pdev, mmc); -+ -+ host->ctl_base = 0; -+ host->hwconfig = mmc_config; -+ host->bus_shift = mmc_config->address_shift; -+ host->asic3_dev = pdev->dev.parent; -+ host->clock_for_sd = 0; -+ -+ tasklet_init(&mmc_data_read_tasklet, mmc_data_transfer, (unsigned long)host); -+ -+ host->ctl_base = ioremap_nocache ((unsigned long)pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start); -+ if(!host->ctl_base){ -+ printk(KERN_ERR DRIVER_NAME ": Could not map ASIC3 SD controller\n"); -+ retval = -ENODEV; -+ goto exceptional_return; -+ } -+ -+ printk(DRIVER_NAME ": ASIC3 MMC/SD Driver, controller at 0x%lx\n", (unsigned long)pdev->resource[0].start); -+ -+ mmc->ops = &mmc_ops; -+ mmc->caps = MMC_CAP_4_BIT_DATA; -+ mmc->f_min = 46875; /* ARIC: not sure what these should be */ -+ mmc->f_max = 24000000; /* ARIC: not sure what these should be */ -+ mmc->ocr_avail = MMC_VDD_32_33; -+ -+ hwinit(host, pdev); -+ -+ -+ host->irq = pdev->resource[1].start; -+ -+ retval = request_irq(host->irq, mmc_irq, 0, DRIVER_NAME, host); -+ if(retval) { -+ printk(KERN_ERR DRIVER_NAME ": Unable to get interrupt\n"); -+ retval = -ENODEV; -+ goto exceptional_return; -+ } -+ set_irq_type(host->irq, IRQT_FALLING); -+ -+ mmc_add_host(mmc); -+ -+#ifdef CONFIG_PM -+ // resume_timer.function = resume_timer_callback; -+ // resume_timer.data = 0; -+ // init_timer(&resume_timer); -+#endif -+ -+ return 0; -+ -+exceptional_return: -+ if (mmc) { -+ mmc_free_host(mmc); -+ } -+ if(host && host->ctl_base) iounmap(host->ctl_base); -+ return retval; -+} -+ -+static int -+mmc_remove(struct platform_device *pdev) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(pdev); -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ if (mmc) { -+ struct asic3_mmc_host *host = mmc_priv(mmc); -+ mmc_remove_host(mmc); -+ free_irq(host->irq, host); -+ /* FIXME - we might want to consider stopping the chip here... */ -+ iounmap(host->ctl_base); -+ mmc_free_host(mmc); /* FIXME - why does this call hang? */ -+ } -+ return 0; -+} -+ -+/* ------------------- device registration ----------------------- */ -+ -+static struct platform_driver mmc_asic3_driver = { -+ .driver = { -+ .name = DRIVER_NAME, -+ }, -+ .probe = mmc_probe, -+ .remove = mmc_remove, -+#ifdef CONFIG_PM -+ .suspend = mmc_suspend, -+ .resume = mmc_resume, -+#endif -+}; -+ -+static int __init mmc_init(void) -+{ -+ return platform_driver_register(&mmc_asic3_driver); -+} -+ -+static void __exit mmc_exit(void) -+{ -+ platform_driver_unregister(&mmc_asic3_driver); -+} -+ -+late_initcall(mmc_init); -+module_exit(mmc_exit); -+ -+MODULE_DESCRIPTION("HTC ASIC3 SD/MMC driver"); -+MODULE_AUTHOR("Aric Blumer, SDG Systems, LLC"); -+MODULE_LICENSE("GPL"); -+ -Index: linux-2.6.23/drivers/mmc/host/asic3_mmc.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/mmc/host/asic3_mmc.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,25 @@ -+#ifndef __ASIC3_MMC_H -+#define __ASIC3_MMC_H -+ -+#define DRIVER_NAME "asic3_mmc" -+ -+#ifdef CONFIG_MMC_DEBUG -+#define DBG(x...) printk(DRIVER_NAME ": " x) -+#else -+#define DBG(x...) do { } while (0) -+#endif -+ -+/* Response types */ -+#define APP_CMD 0x0040 -+ -+#define SD_CONFIG_CLKSTOP_ENABLE_ALL 0x1f -+ -+#define DONT_CARE_CARD_BITS ( \ -+ SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 \ -+ | SD_CTRL_INTMASKCARD_WRITE_PROTECT \ -+ | SD_CTRL_INTMASKCARD_UNK6 \ -+ | SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 \ -+ ) -+#define DONT_CARE_BUFFER_BITS ( SD_CTRL_INTMASKBUFFER_UNK7 | SD_CTRL_INTMASKBUFFER_CMD_BUSY ) -+ -+#endif // __ASIC3_MMC_H -Index: linux-2.6.23/drivers/input/keyboard/Makefile -=================================================================== ---- linux-2.6.23.orig/drivers/input/keyboard/Makefile 2008-01-20 18:59:16.000000000 +0000 -+++ linux-2.6.23/drivers/input/keyboard/Makefile 2008-01-20 21:11:40.000000000 +0000 -@@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newton - obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o - obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o - obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o -+obj-$(CONFIG_KEYBOARD_ASIC3) += asic3_keys.o - obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o - obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o - obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o -Index: linux-2.6.23/drivers/input/keyboard/asic3_keys.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/drivers/input/keyboard/asic3_keys.c 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,131 @@ -+/* -+ * Generic buttons driver for ASIC3 SoC. -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ * -+ * Copyright (C) 2003 Joshua Wise -+ * Copyright (C) 2005 Pawel Kolodziejski -+ * Copyright (C) 2006 Paul Sokolovsky -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static irqreturn_t asic3_keys_asic_handle(int irq, void *data) -+{ -+ struct asic3_keys_platform_data *pdata = data; -+ int i, base_irq; -+ -+ base_irq = asic3_irq_base(pdata->asic3_dev); -+ for (i = 0; i < pdata->nbuttons; i++) { -+ struct asic3_keys_button *b = &pdata->buttons[i]; -+ if ((base_irq + b->gpio) == irq) { -+ int state = !!asic3_gpio_get_value(pdata->asic3_dev, b->gpio); -+ -+ if (pdata->buttons[i].type == EV_SW) -+ input_report_switch(pdata->input, pdata->buttons[i].keycode, state ^ b->active_low); -+ else -+ input_report_key(pdata->input, b->keycode, state ^ b->active_low); -+ input_sync(pdata->input); -+ } -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static int __devinit asic3_keys_probe(struct platform_device *pdev) -+{ -+ struct asic3_keys_platform_data *pdata = pdev->dev.platform_data; -+ int i, base_irq; -+ int j, ret; -+ -+ pdata->input = input_allocate_device(); -+ -+ base_irq = asic3_irq_base(pdata->asic3_dev); -+ -+ for (i = 0; i < pdata->nbuttons; i++) { -+ struct asic3_keys_button *b = &pdata->buttons[i]; -+ set_bit(b->keycode, pdata->input->keybit); -+ ret=request_irq(base_irq + b->gpio, asic3_keys_asic_handle, SA_SAMPLE_RANDOM, b->desc, pdata); -+ if (ret) -+ { -+ printk(KERN_NOTICE "Failed to allocate asic3_keys irq=%d.\n",b->gpio); -+ -+ for(j=0; jbuttons[i].gpio, NULL); -+ -+ input_unregister_device (pdata->input); -+ -+ return -ENODEV; -+ } -+ -+ set_irq_type(base_irq + b->gpio, IRQT_BOTHEDGE); -+ if (pdata->buttons[i].type == EV_SW) { -+ pdata->input->evbit[0] |= BIT(EV_SW); -+ set_bit(b->keycode, pdata->input->swbit); -+ } else { -+ pdata->input->evbit[0] |= BIT(EV_KEY); -+ set_bit(b->keycode, pdata->input->keybit); -+ } -+ } -+ -+ pdata->input->name = pdev->name; -+ input_register_device(pdata->input); -+ -+ return 0; -+} -+ -+static int __devexit asic3_keys_remove(struct platform_device *pdev) -+{ -+ struct asic3_keys_platform_data *pdata = pdev->dev.platform_data; -+ int i, base_irq; -+ -+ base_irq = asic3_irq_base(pdata->asic3_dev); -+ for (i = 0; i < pdata->nbuttons; i++) { -+ free_irq(base_irq + pdata->buttons[i].gpio, NULL); -+ } -+ -+ input_unregister_device(pdata->input); -+ -+ return 0; -+} -+ -+ -+static struct platform_driver asic3_keys_driver = { -+ .probe = asic3_keys_probe, -+ .remove = __devexit_p(asic3_keys_remove), -+ .driver = { -+ .name = "asic3-keys", -+ }, -+}; -+ -+static int __init asic3_keys_init(void) -+{ -+ return platform_driver_register(&asic3_keys_driver); -+} -+ -+static void __exit asic3_keys_exit(void) -+{ -+ platform_driver_unregister(&asic3_keys_driver); -+} -+ -+module_init(asic3_keys_init); -+module_exit(asic3_keys_exit); -+ -+MODULE_AUTHOR("Joshua Wise, Pawel Kolodziejski, Paul Sokolovsky"); -+MODULE_DESCRIPTION("Buttons driver for HTC ASIC3 SoC"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.23/include/asm-arm/arch-pxa/irqs.h -=================================================================== ---- linux-2.6.23.orig/include/asm-arm/arch-pxa/irqs.h 2008-01-20 18:59:28.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/arch-pxa/irqs.h 2008-01-20 18:59:46.000000000 +0000 -@@ -182,6 +182,8 @@ - defined(CONFIG_MACH_LOGICPD_PXA270) || \ - defined(CONFIG_MACH_MAINSTONE) - #define NR_IRQS (IRQ_BOARD_END) -+#elif defined(CONFIG_MACH_HTCUNIVERSAL) -+#define NR_IRQS (IRQ_BOARD_START + 96) - #else - #define NR_IRQS (IRQ_BOARD_START) - #endif -Index: linux-2.6.23/include/linux/ioport.h -=================================================================== ---- linux-2.6.23.orig/include/linux/ioport.h 2008-01-20 18:59:31.000000000 +0000 -+++ linux-2.6.23/include/linux/ioport.h 2008-01-20 18:59:46.000000000 +0000 -@@ -56,6 +56,7 @@ struct resource_list { - #define IORESOURCE_IRQ_HIGHLEVEL (1<<2) - #define IORESOURCE_IRQ_LOWLEVEL (1<<3) - #define IORESOURCE_IRQ_SHAREABLE (1<<4) -+#define IORESOURCE_IRQ_SOC_SUBDEVICE (1<<5) - - /* ISA PnP DMA specific bits (IORESOURCE_BITS) */ - #define IORESOURCE_DMA_TYPE_MASK (3<<0) -Index: linux-2.6.23/include/asm-arm/arch-pxa/serial.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.23/include/asm-arm/arch-pxa/serial.h 2008-01-20 18:59:46.000000000 +0000 -@@ -0,0 +1,78 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/serial.h -+ * -+ * Author: Nicolas Pitre -+ * Copyright: (C) 2001 MontaVista Software Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+ -+#define BAUD_BASE 921600 -+ -+/* Standard COM flags */ -+#define STD_COM_FLAGS (ASYNC_SKIP_TEST) -+ -+#define STD_SERIAL_PORT_DEFNS \ -+ { \ -+ type: PORT_PXA, \ -+ xmit_fifo_size: 64, \ -+ baud_base: BAUD_BASE, \ -+ iomem_base: &FFUART, \ -+ iomem_reg_shift: 2, \ -+ io_type: SERIAL_IO_MEM, \ -+ irq: IRQ_FFUART, \ -+ flags: STD_COM_FLAGS, \ -+ }, { \ -+ type: PORT_PXA, \ -+ xmit_fifo_size: 64, \ -+ baud_base: BAUD_BASE, \ -+ iomem_base: &STUART, \ -+ iomem_reg_shift: 2, \ -+ io_type: SERIAL_IO_MEM, \ -+ irq: IRQ_STUART, \ -+ flags: STD_COM_FLAGS, \ -+ }, { \ -+ type: PORT_PXA, \ -+ xmit_fifo_size: 64, \ -+ baud_base: BAUD_BASE, \ -+ iomem_base: &BTUART, \ -+ iomem_reg_shift: 2, \ -+ io_type: SERIAL_IO_MEM, \ -+ irq: IRQ_BTUART, \ -+ flags: STD_COM_FLAGS, \ -+ } -+ -+#define EXTRA_SERIAL_PORT_DEFNS -+ -+struct platform_pxa_serial_funcs { -+ -+ /* Initialize whatever is connected to this serial port. */ -+ void (*configure)(int state); -+#define PXA_UART_CFG_PRE_STARTUP 0 -+#define PXA_UART_CFG_POST_STARTUP 1 -+#define PXA_UART_CFG_PRE_SHUTDOWN 2 -+#define PXA_UART_CFG_POST_SHUTDOWN 3 -+ -+ /* Enable or disable the individual transmitter/receiver submodules. -+ * On transceivers without echo cancellation (e.g. SIR) -+ * transmitter always has priority; e.g. if both bits are set, -+ * only the transmitter is enabled. */ -+ void (*set_txrx)(int txrx); -+#define PXA_SERIAL_TX 1 -+#define PXA_SERIAL_RX 2 -+ -+ /* Get the current state of tx/rx. */ -+ int (*get_txrx)(void); -+ -+ int (*suspend)(struct platform_device *dev, pm_message_t state); -+ int (*resume)(struct platform_device *dev); -+}; -+ -+void pxa_set_ffuart_info(struct platform_pxa_serial_funcs *ffuart_funcs); -+void pxa_set_btuart_info(struct platform_pxa_serial_funcs *btuart_funcs); -+void pxa_set_stuart_info(struct platform_pxa_serial_funcs *stuart_funcs); -+void pxa_set_hwuart_info(struct platform_pxa_serial_funcs *hwuart_funcs); -Index: linux-2.6.23/drivers/serial/pxa.c -=================================================================== ---- linux-2.6.23.orig/drivers/serial/pxa.c 2008-01-20 18:59:23.000000000 +0000 -+++ linux-2.6.23/drivers/serial/pxa.c 2008-01-20 18:59:46.000000000 +0000 -@@ -47,6 +47,7 @@ - #include - #include - #include -+#include - #include - - -@@ -60,6 +61,14 @@ struct uart_pxa_port { - char *name; - }; - -+ -+#define IS_METHOD(dev, method) (dev && (dev)->platform_data && ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method) -+#define METHOD_CALL(dev, method) \ -+ ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method() -+#define SAFE_METHOD_CALL(dev, method, args...) \ -+ if (IS_METHOD(dev, method)) \ -+ ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method(args) -+ - static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) - { - offset <<= 2; -@@ -347,6 +356,9 @@ static int serial_pxa_startup(struct uar - unsigned long flags; - int retval; - -+ /* Perform platform-specific port initialization, if needed. */ -+ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_PRE_STARTUP); -+ - if (port->line == 3) /* HWUART */ - up->mcr |= UART_MCR_AFE; - else -@@ -404,6 +416,12 @@ static int serial_pxa_startup(struct uar - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - -+ /* -+ * Perform platform-specific port initialization if needed -+ */ -+ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_POST_STARTUP); -+ SAFE_METHOD_CALL(port->dev, set_txrx, PXA_SERIAL_RX); -+ - return 0; - } - -@@ -412,6 +430,8 @@ static void serial_pxa_shutdown(struct u - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; - -+ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_PRE_SHUTDOWN); -+ - free_irq(up->port.irq, up); - - /* -@@ -433,6 +453,8 @@ static void serial_pxa_shutdown(struct u - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); -+ -+ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_POST_SHUTDOWN); - } - - static void -Index: linux-2.6.23/arch/arm/mach-pxa/generic.c -=================================================================== ---- linux-2.6.23.orig/arch/arm/mach-pxa/generic.c 2008-01-20 18:59:09.000000000 +0000 -+++ linux-2.6.23/arch/arm/mach-pxa/generic.c 2008-01-20 18:59:46.000000000 +0000 -@@ -38,6 +38,7 @@ - #include - #include - #include -+#include - - #include "devices.h" - #include "generic.h" -@@ -412,6 +413,18 @@ struct platform_device pxa_device_hwuart - .num_resources = ARRAY_SIZE(pxa_resource_hwuart), - }; - -+void __init pxa_set_ffuart_info(struct platform_pxa_serial_funcs *info) -+{ -+ pxa_device_ffuart.dev.platform_data = info; -+} -+EXPORT_SYMBOL(pxa_set_ffuart_info); -+ -+void __init pxa_set_btuart_info(struct platform_pxa_serial_funcs *info) -+{ -+ pxa_device_btuart.dev.platform_data = info; -+} -+EXPORT_SYMBOL(pxa_set_btuart_info); -+ - static struct resource pxai2c_resources[] = { - { - .start = 0x40301680, -Index: linux-2.6.23/drivers/leds/Makefile -=================================================================== ---- linux-2.6.23.orig/drivers/leds/Makefile 2008-01-20 18:59:17.000000000 +0000 -+++ linux-2.6.23/drivers/leds/Makefile 2008-01-20 21:10:45.000000000 +0000 -@@ -15,6 +15,7 @@ obj-$(CONFIG_LEDS_AMS_DELTA) += leds-am - obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o - obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o - obj-$(CONFIG_LEDS_H1940) += leds-h1940.o -+obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o - obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o - obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o - obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o -Index: linux-2.6.23/drivers/input/keyboard/Kconfig -=================================================================== ---- linux-2.6.23.orig/drivers/input/keyboard/Kconfig 2008-01-20 18:59:16.000000000 +0000 -+++ linux-2.6.23/drivers/input/keyboard/Kconfig 2008-01-20 18:59:46.000000000 +0000 -@@ -293,4 +293,11 @@ config KEYBOARD_BFIN - To compile this driver as a module, choose M here: the - module will be called bf54x-keys. - -+config KEYBOARD_ASIC3 -+ tristate "Buttons on ASIC3 SoC GPIOs (iPaqs, etc.)" -+ depends on HTC_ASIC3 -+ help -+ This enables support for the buttons attached to GPIOs of -+ HTC ASIC3 peripheral controller. -+ - endif diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/pxa-serial-hack.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/pxa-serial-hack.patch deleted file mode 100644 index bf20f46a05..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/pxa-serial-hack.patch +++ /dev/null @@ -1,90 +0,0 @@ ---- - drivers/serial/8250.c | 5 +++++ - drivers/serial/serial_core.c | 1 + - drivers/serial/serial_cs.c | 12 +++++++++--- - include/linux/serial_core.h | 1 + - 4 files changed, 16 insertions(+), 3 deletions(-) - -Index: linux-2.6.20/drivers/serial/8250.c -=================================================================== ---- linux-2.6.20.orig/drivers/serial/8250.c 2007-04-27 13:37:26.000000000 +0100 -+++ linux-2.6.20/drivers/serial/8250.c 2007-04-27 13:38:16.000000000 +0100 -@@ -2429,7 +2429,12 @@ - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, -+#ifdef CONFIG_SERIAL_PXA -+ .minor = 64 + 4, -+ .name_base = 4, -+#else - .minor = 64, -+#endif - .nr = UART_NR, - .cons = SERIAL8250_CONSOLE, - }; -Index: linux-2.6.20/drivers/serial/serial_core.c -=================================================================== ---- linux-2.6.20.orig/drivers/serial/serial_core.c 2007-02-04 18:44:54.000000000 +0000 -+++ linux-2.6.20/drivers/serial/serial_core.c 2007-04-27 13:39:39.000000000 +0100 -@@ -2068,7 +2068,8 @@ - printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n", - port->dev ? port->dev->bus_id : "", - port->dev ? ": " : "", -- drv->dev_name, port->line, address, port->irq, uart_type(port)); -+ drv->dev_name, port->line + drv->name_base, address, port->irq, -+ uart_type(port)); - } - - static void -@@ -2183,6 +2184,7 @@ - normal->owner = drv->owner; - normal->driver_name = drv->driver_name; - normal->name = drv->dev_name; -+ normal->name_base = drv->name_base; - normal->major = drv->major; - normal->minor_start = drv->minor; - normal->type = TTY_DRIVER_TYPE_SERIAL; -Index: linux-2.6.20/include/linux/serial_core.h -=================================================================== ---- linux-2.6.20.orig/include/linux/serial_core.h 2007-02-04 18:44:54.000000000 +0000 -+++ linux-2.6.20/include/linux/serial_core.h 2007-04-27 13:37:27.000000000 +0100 -@@ -341,6 +341,7 @@ - struct module *owner; - const char *driver_name; - const char *dev_name; -+ int name_base; - int major; - int minor; - int nr; -Index: linux-2.6.20/drivers/serial/serial_cs.c -=================================================================== ---- linux-2.6.20.orig/drivers/serial/serial_cs.c 2007-02-04 18:44:54.000000000 +0000 -+++ linux-2.6.20/drivers/serial/serial_cs.c 2007-04-27 13:40:34.000000000 +0100 -@@ -390,7 +390,7 @@ - kio_addr_t iobase, int irq) - { - struct uart_port port; -- int line; -+ int line, linestart; - - memset(&port, 0, sizeof (struct uart_port)); - port.iobase = iobase; -@@ -411,10 +411,16 @@ - return -EINVAL; - } - -+#if CONFIG_SERIAL_PXA -+ linestart = 4; -+#else -+ linestart = 0; -+#endif -+ - info->line[info->ndev] = line; -- sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); -+ sprintf(info->node[info->ndev].dev_name, "ttyS%d", line+linestart); - info->node[info->ndev].major = TTY_MAJOR; -- info->node[info->ndev].minor = 0x40 + line; -+ info->node[info->ndev].minor = 0x40 + line + linestart; - if (info->ndev > 0) - info->node[info->ndev - 1].next = &info->node[info->ndev]; - info->ndev++; diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/pxa_fb_overlay.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/pxa_fb_overlay.patch deleted file mode 100644 index 49c59b3275..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/pxa_fb_overlay.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- - drivers/video/pxafb.h | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -Index: linux-2.6.22/drivers/video/pxafb.h -=================================================================== ---- linux-2.6.22.orig/drivers/video/pxafb.h 2007-09-25 15:44:42.000000000 +0200 -+++ linux-2.6.22/drivers/video/pxafb.h 2007-09-25 15:45:07.000000000 +0200 -@@ -36,7 +36,7 @@ - struct fb_bitfield transp; - }; - --#ifdef CONFIG_PXA27x -+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - /* PXA Overlay Framebuffer Support */ - struct overlayfb_info - { -@@ -142,7 +142,7 @@ - wait_queue_head_t ctrlr_wait; - struct work_struct task; - --#ifdef CONFIG_PXA27x -+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - /* PXA Overlay Framebuffer Support */ - struct overlayfb_info *overlay1fb; - struct overlayfb_info *overlay2fb; diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch deleted file mode 100644 index b513ba1466..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch +++ /dev/null @@ -1,155 +0,0 @@ - -From: Petr Vandrovec - -Patch below adds support for using different prescaler than 16 for 16c950 -chips. This is needed for using Fujitsu-Siemens Connect2Air compact-flash -card, which comes (apparently) with 806kHz clocks, and so you have to -program prescaler for division by 7, and DLAB to 1, to get 115200Bd. - -To get card properly running you also have to add lines below to -/etc/pcmcia/serial.opts so kernel knows that base speed is not 115200 but -50400 (50400 * 16 = 806400; 806400 / 7 = 115200). As I've found no code -specifying baud_rate in serial_cs, I assume that specifying it in -serial.opts is right way to do this type of things. - -Patch also fixes problem that for UPF_MAGIC_MULTIPLIER maximum possible -baud rate passed to uart code was uartclk / 16 while correct value for -these devices (and for 16c950) is uartclk / 4. - -Patch also fixes problem that for UPF_MAGIC_MULTIPLIER devices with -baud_rate 19200 or 9600 spd_cust did not work correctly. Not that such -devices exist, but we should not ignore spd_cust, user probably knows why -he asked for spd_cust. - -serial.opts: - -case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in -'0279,950b-2-GPRS Modem---') - SERIAL_OPTS="baud_base 50400" - ;; -esac - -Cc: David Woodhouse -Signed-off-by: Andrew Morton ---- - - drivers/serial/8250.c | 82 +++++++++++++++++++++++++++++++++++++++----------- - 1 file changed, 64 insertions(+), 18 deletions(-) - -Index: linux-2.6.21/drivers/serial/8250.c -=================================================================== ---- linux-2.6.21.orig/drivers/serial/8250.c 2007-07-01 16:59:52.000000000 +0100 -+++ linux-2.6.21/drivers/serial/8250.c 2007-07-01 17:01:21.000000000 +0100 -@@ -1964,24 +1964,58 @@ static void serial8250_shutdown(struct u - serial_unlink_irq_chain(up); - } - --static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) -+static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud, -+ unsigned int *prescaler) - { -- unsigned int quot; -- -- /* -- * Handle magic divisors for baud rates above baud_base on -- * SMSC SuperIO chips. -+ /* -+ * Use special handling only if user did not supply its own divider. -+ * spd_cust is defined in terms of baud_base, so always use default -+ * prescaler when spd_cust is requested. - */ -- if ((port->flags & UPF_MAGIC_MULTIPLIER) && -- baud == (port->uartclk/4)) -- quot = 0x8001; -- else if ((port->flags & UPF_MAGIC_MULTIPLIER) && -- baud == (port->uartclk/8)) -- quot = 0x8002; -- else -- quot = uart_get_divisor(port, baud); - -- return quot; -+ *prescaler = 16; -+ if (baud != 38400 || (port->flags & UPF_SPD_MASK) != UPF_SPD_CUST) { -+ unsigned int quot = port->uartclk / baud; -+ -+ /* -+ * Handle magic divisors for baud rates above baud_base on -+ * SMSC SuperIO chips. -+ */ -+ if (port->flags & UPF_MAGIC_MULTIPLIER) { -+ if (quot == 4) { -+ return 0x8001; -+ } else if (quot == 8) { -+ return 0x8002; -+ } -+ } -+ if (port->type == PORT_16C950) { -+ /* -+ * This computes TCR value (4 to 16), not CPR value (which can -+ * be between 1.000 and 31.875) - chip I have uses XTAL of -+ * 806400Hz, and so a division by 7 is required to get 115200Bd. -+ * I'm leaving CPR disabled for now, until someone will -+ * hit even more exotic XTAL (it is needed to get 500kbps -+ * or 1000kbps from 18.432MHz XTAL, but I have no device -+ * which would benefit from doing that). -+ * -+ * If we can use divide by 16, use it. Otherwise look for -+ * better prescaler, from 15 to 4. If quotient cannot -+ * be divided by any integer value between 4 and 15, use 4. -+ */ -+ if (quot & 0x0F) { -+ unsigned int div; -+ -+ for (div = 15; div > 4; div--) { -+ if (quot % div == 0) { -+ break; -+ } -+ } -+ *prescaler = div; -+ return quot / div; -+ } -+ } -+ } -+ return uart_get_divisor(port, baud); - } - - static void -@@ -1991,7 +2025,7 @@ serial8250_set_termios(struct uart_port - struct uart_8250_port *up = (struct uart_8250_port *)port; - unsigned char cval, fcr = 0; - unsigned long flags; -- unsigned int baud, quot; -+ unsigned int baud, quot, prescaler; - - switch (termios->c_cflag & CSIZE) { - case CS5: -@@ -2023,8 +2057,13 @@ serial8250_set_termios(struct uart_port - /* - * Ask the core to calculate the divisor for us. - */ -- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); -- quot = serial8250_get_divisor(port, baud); -+ if (port->type == PORT_16C950 || (port->flags & UPF_MAGIC_MULTIPLIER)) { -+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); -+ } else { -+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); -+ } -+ quot = serial8250_get_divisor(port, baud, &prescaler); -+ - - /* - * Oxford Semi 952 rev B workaround -@@ -2139,6 +2178,13 @@ serial8250_set_termios(struct uart_port - serial_dl_write(up, quot); - - /* -+ * Program prescaler for 16C950 chips. -+ */ -+ if (up->port.type == PORT_16C950) { -+ serial_icr_write(up, UART_TCR, prescaler == 16 ? 0 : prescaler); -+ } -+ -+ /* - * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR - * is written without DLAB set, this mode will be disabled. - */ diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/squashfs3.3.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/squashfs3.3.patch deleted file mode 100644 index cb9a5c49e4..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/squashfs3.3.patch +++ /dev/null @@ -1,4234 +0,0 @@ -diff -x .gitignore -Nurp linux-2.6.24/fs/Kconfig linux-2.6.24-squashfs3.3/fs/Kconfig ---- linux-2.6.24/fs/Kconfig 2007-10-25 17:41:45.000000000 +0100 -+++ linux-2.6.24-squashfs3.3/fs/Kconfig 2007-11-01 05:06:25.000000000 +0000 -@@ -1396,6 +1396,56 @@ config CRAMFS - - If unsure, say N. - -+config SQUASHFS -+ tristate "SquashFS 3.3 - Squashed file system support" -+ select ZLIB_INFLATE -+ help -+ Saying Y here includes support for SquashFS 3.3 (a Compressed -+ Read-Only File System). Squashfs is a highly compressed read-only -+ filesystem for Linux. It uses zlib compression to compress both -+ files, inodes and directories. Inodes in the system are very small -+ and all blocks are packed to minimise data overhead. Block sizes -+ greater than 4K are supported up to a maximum of 1 Mbytes (default -+ block size 128K). SquashFS 3.3 supports 64 bit filesystems and files -+ (larger than 4GB), full uid/gid information, hard links and timestamps. -+ -+ Squashfs is intended for general read-only filesystem use, for -+ archival use (i.e. in cases where a .tar.gz file may be used), and in -+ embedded systems where low overhead is needed. Further information -+ and filesystem tools are available from http://squashfs.sourceforge.net. -+ -+ If you want to compile this as a module ( = code which can be -+ inserted in and removed from the running kernel whenever you want), -+ say M here and read . The module -+ will be called squashfs. Note that the root file system (the one -+ containing the directory /) cannot be compiled as a module. -+ -+ If unsure, say N. -+ -+config SQUASHFS_EMBEDDED -+ -+ bool "Additional option for memory-constrained systems" -+ depends on SQUASHFS -+ default n -+ help -+ Saying Y here allows you to specify cache size. -+ -+ If unsure, say N. -+ -+config SQUASHFS_FRAGMENT_CACHE_SIZE -+ int "Number of fragments cached" if SQUASHFS_EMBEDDED -+ depends on SQUASHFS -+ default "3" -+ help -+ By default SquashFS caches the last 3 fragments read from -+ the filesystem. Increasing this amount may mean SquashFS -+ has to re-read fragments less often from disk, at the expense -+ of extra system memory. Decreasing this amount will mean -+ SquashFS uses less memory at the expense of extra reads from disk. -+ -+ Note there must be at least one cached fragment. Anything -+ much more than three will probably not make much difference. -+ - config VXFS_FS - tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" - depends on BLOCK -diff -x .gitignore -Nurp linux-2.6.24/fs/Makefile linux-2.6.24-squashfs3.3/fs/Makefile ---- linux-2.6.24/fs/Makefile 2007-10-25 17:41:45.000000000 +0100 -+++ linux-2.6.24-squashfs3.3/fs/Makefile 2007-11-01 05:08:09.000000000 +0000 -@@ -72,6 +72,7 @@ obj-$(CONFIG_JBD) += jbd/ - obj-$(CONFIG_JBD2) += jbd2/ - obj-$(CONFIG_EXT2_FS) += ext2/ - obj-$(CONFIG_CRAMFS) += cramfs/ -+obj-$(CONFIG_SQUASHFS) += squashfs/ - obj-y += ramfs/ - obj-$(CONFIG_HUGETLBFS) += hugetlbfs/ - obj-$(CONFIG_CODA_FS) += coda/ -diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/inode.c linux-2.6.24-squashfs3.3/fs/squashfs/inode.c ---- linux-2.6.24/fs/squashfs/inode.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.24-squashfs3.3/fs/squashfs/inode.c 2007-11-01 05:05:00.000000000 +0000 -@@ -0,0 +1,2192 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * inode.c -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "squashfs.h" -+ -+int squashfs_cached_blks; -+ -+static void vfs_read_inode(struct inode *i); -+static struct dentry *squashfs_get_parent(struct dentry *child); -+static int squashfs_read_inode(struct inode *i, squashfs_inode_t inode); -+static int squashfs_statfs(struct dentry *, struct kstatfs *); -+static int squashfs_symlink_readpage(struct file *file, struct page *page); -+static long long read_blocklist(struct inode *inode, int index, -+ int readahead_blks, char *block_list, -+ unsigned short **block_p, unsigned int *bsize); -+static int squashfs_readpage(struct file *file, struct page *page); -+static int squashfs_readdir(struct file *, void *, filldir_t); -+static struct dentry *squashfs_lookup(struct inode *, struct dentry *, -+ struct nameidata *); -+static int squashfs_remount(struct super_block *s, int *flags, char *data); -+static void squashfs_put_super(struct super_block *); -+static int squashfs_get_sb(struct file_system_type *,int, const char *, void *, -+ struct vfsmount *); -+static struct inode *squashfs_alloc_inode(struct super_block *sb); -+static void squashfs_destroy_inode(struct inode *inode); -+static int init_inodecache(void); -+static void destroy_inodecache(void); -+ -+static struct file_system_type squashfs_fs_type = { -+ .owner = THIS_MODULE, -+ .name = "squashfs", -+ .get_sb = squashfs_get_sb, -+ .kill_sb = kill_block_super, -+ .fs_flags = FS_REQUIRES_DEV -+}; -+ -+static const unsigned char squashfs_filetype_table[] = { -+ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK -+}; -+ -+static struct super_operations squashfs_super_ops = { -+ .alloc_inode = squashfs_alloc_inode, -+ .destroy_inode = squashfs_destroy_inode, -+ .statfs = squashfs_statfs, -+ .put_super = squashfs_put_super, -+ .remount_fs = squashfs_remount -+}; -+ -+static struct super_operations squashfs_export_super_ops = { -+ .alloc_inode = squashfs_alloc_inode, -+ .destroy_inode = squashfs_destroy_inode, -+ .statfs = squashfs_statfs, -+ .put_super = squashfs_put_super, -+ .read_inode = vfs_read_inode -+}; -+ -+static struct export_operations squashfs_export_ops = { -+ .get_parent = squashfs_get_parent -+}; -+ -+SQSH_EXTERN const struct address_space_operations squashfs_symlink_aops = { -+ .readpage = squashfs_symlink_readpage -+}; -+ -+SQSH_EXTERN const struct address_space_operations squashfs_aops = { -+ .readpage = squashfs_readpage -+}; -+ -+static const struct file_operations squashfs_dir_ops = { -+ .read = generic_read_dir, -+ .readdir = squashfs_readdir -+}; -+ -+SQSH_EXTERN struct inode_operations squashfs_dir_inode_ops = { -+ .lookup = squashfs_lookup -+}; -+ -+ -+static struct buffer_head *get_block_length(struct super_block *s, -+ int *cur_index, int *offset, int *c_byte) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ unsigned short temp; -+ struct buffer_head *bh; -+ -+ if (!(bh = sb_bread(s, *cur_index))) -+ goto out; -+ -+ if (msblk->devblksize - *offset == 1) { -+ if (msblk->swap) -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ else -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ brelse(bh); -+ if (!(bh = sb_bread(s, ++(*cur_index)))) -+ goto out; -+ if (msblk->swap) -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ bh->b_data); -+ else -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ bh->b_data); -+ *c_byte = temp; -+ *offset = 1; -+ } else { -+ if (msblk->swap) { -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset + 1)); -+ } else { -+ ((unsigned char *) &temp)[0] = *((unsigned char *) -+ (bh->b_data + *offset)); -+ ((unsigned char *) &temp)[1] = *((unsigned char *) -+ (bh->b_data + *offset + 1)); -+ } -+ *c_byte = temp; -+ *offset += 2; -+ } -+ -+ if (SQUASHFS_CHECK_DATA(msblk->sblk.flags)) { -+ if (*offset == msblk->devblksize) { -+ brelse(bh); -+ if (!(bh = sb_bread(s, ++(*cur_index)))) -+ goto out; -+ *offset = 0; -+ } -+ if (*((unsigned char *) (bh->b_data + *offset)) != -+ SQUASHFS_MARKER_BYTE) { -+ ERROR("Metadata block marker corrupt @ %x\n", -+ *cur_index); -+ brelse(bh); -+ goto out; -+ } -+ (*offset)++; -+ } -+ return bh; -+ -+out: -+ return NULL; -+} -+ -+ -+SQSH_EXTERN unsigned int squashfs_read_data(struct super_block *s, char *buffer, -+ long long index, unsigned int length, -+ long long *next_index, int srclength) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ struct buffer_head **bh; -+ unsigned int offset = index & ((1 << msblk->devblksize_log2) - 1); -+ unsigned int cur_index = index >> msblk->devblksize_log2; -+ int bytes, avail_bytes, b = 0, k = 0; -+ unsigned int compressed; -+ unsigned int c_byte = length; -+ -+ bh = kmalloc(((sblk->block_size >> msblk->devblksize_log2) + 1) * -+ sizeof(struct buffer_head *), GFP_KERNEL); -+ if (bh == NULL) -+ goto read_failure; -+ -+ if (c_byte) { -+ bytes = msblk->devblksize - offset; -+ compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte); -+ c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte); -+ -+ TRACE("Block @ 0x%llx, %scompressed size %d, src size %d\n", index, -+ compressed ? "" : "un", (unsigned int) c_byte, srclength); -+ -+ if (c_byte > srclength || index < 0 || (index + c_byte) > sblk->bytes_used) -+ goto read_failure; -+ -+ bh[0] = sb_getblk(s, cur_index); -+ if (bh[0] == NULL) -+ goto block_release; -+ -+ for (b = 1; bytes < c_byte; b++) { -+ bh[b] = sb_getblk(s, ++cur_index); -+ if (bh[b] == NULL) -+ goto block_release; -+ bytes += msblk->devblksize; -+ } -+ ll_rw_block(READ, b, bh); -+ } else { -+ if (index < 0 || (index + 2) > sblk->bytes_used) -+ goto read_failure; -+ -+ bh[0] = get_block_length(s, &cur_index, &offset, &c_byte); -+ if (bh[0] == NULL) -+ goto read_failure; -+ -+ bytes = msblk->devblksize - offset; -+ compressed = SQUASHFS_COMPRESSED(c_byte); -+ c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte); -+ -+ TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed -+ ? "" : "un", (unsigned int) c_byte); -+ -+ if (c_byte > srclength || (index + c_byte) > sblk->bytes_used) -+ goto read_failure; -+ -+ for (b = 1; bytes < c_byte; b++) { -+ bh[b] = sb_getblk(s, ++cur_index); -+ if (bh[b] == NULL) -+ goto block_release; -+ bytes += msblk->devblksize; -+ } -+ ll_rw_block(READ, b - 1, bh + 1); -+ } -+ -+ if (compressed) { -+ int zlib_err = 0; -+ -+ /* -+ * uncompress block -+ */ -+ -+ mutex_lock(&msblk->read_data_mutex); -+ -+ msblk->stream.next_out = buffer; -+ msblk->stream.avail_out = srclength; -+ -+ for (bytes = 0; k < b; k++) { -+ avail_bytes = min(c_byte - bytes, msblk->devblksize - offset); -+ -+ wait_on_buffer(bh[k]); -+ if (!buffer_uptodate(bh[k])) -+ goto release_mutex; -+ -+ msblk->stream.next_in = bh[k]->b_data + offset; -+ msblk->stream.avail_in = avail_bytes; -+ -+ if (k == 0) { -+ zlib_err = zlib_inflateInit(&msblk->stream); -+ if (zlib_err != Z_OK) { -+ ERROR("zlib_inflateInit returned unexpected result 0x%x," -+ " srclength %d\n", zlib_err, srclength); -+ goto release_mutex; -+ } -+ -+ if (avail_bytes == 0) { -+ offset = 0; -+ brelse(bh[k]); -+ continue; -+ } -+ } -+ -+ zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH); -+ if (zlib_err != Z_OK && zlib_err != Z_STREAM_END) { -+ ERROR("zlib_inflate returned unexpected result 0x%x," -+ " srclength %d, avail_in %d, avail_out %d\n", zlib_err, -+ srclength, msblk->stream.avail_in, msblk->stream.avail_out); -+ goto release_mutex; -+ } -+ -+ bytes += avail_bytes; -+ offset = 0; -+ brelse(bh[k]); -+ } -+ -+ if (zlib_err != Z_STREAM_END) -+ goto release_mutex; -+ -+ zlib_err = zlib_inflateEnd(&msblk->stream); -+ if (zlib_err != Z_OK) { -+ ERROR("zlib_inflateEnd returned unexpected result 0x%x," -+ " srclength %d\n", zlib_err, srclength); -+ goto release_mutex; -+ } -+ bytes = msblk->stream.total_out; -+ mutex_unlock(&msblk->read_data_mutex); -+ } else { -+ int i; -+ -+ for(i = 0; i < b; i++) { -+ wait_on_buffer(bh[i]); -+ if (!buffer_uptodate(bh[i])) -+ goto block_release; -+ } -+ -+ for (bytes = 0; k < b; k++) { -+ avail_bytes = min(c_byte - bytes, msblk->devblksize - offset); -+ -+ memcpy(buffer + bytes, bh[k]->b_data + offset, avail_bytes); -+ bytes += avail_bytes; -+ offset = 0; -+ brelse(bh[k]); -+ } -+ } -+ -+ if (next_index) -+ *next_index = index + c_byte + (length ? 0 : -+ (SQUASHFS_CHECK_DATA(msblk->sblk.flags) ? 3 : 2)); -+ -+ kfree(bh); -+ return bytes; -+ -+release_mutex: -+ mutex_unlock(&msblk->read_data_mutex); -+ -+block_release: -+ for (; k < b; k++) -+ brelse(bh[k]); -+ -+read_failure: -+ ERROR("sb_bread failed reading block 0x%x\n", cur_index); -+ kfree(bh); -+ return 0; -+} -+ -+ -+SQSH_EXTERN int squashfs_get_cached_block(struct super_block *s, void *buffer, -+ long long block, unsigned int offset, -+ int length, long long *next_block, -+ unsigned int *next_offset) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ int n, i, bytes, return_length = length; -+ long long next_index; -+ -+ TRACE("Entered squashfs_get_cached_block [%llx:%x]\n", block, offset); -+ -+ while (1) { -+ for (i = 0; i < squashfs_cached_blks; i++) -+ if (msblk->block_cache[i].block == block) -+ break; -+ -+ mutex_lock(&msblk->block_cache_mutex); -+ -+ if (i == squashfs_cached_blks) { -+ /* read inode header block */ -+ if (msblk->unused_cache_blks == 0) { -+ mutex_unlock(&msblk->block_cache_mutex); -+ wait_event(msblk->waitq, msblk->unused_cache_blks); -+ continue; -+ } -+ -+ i = msblk->next_cache; -+ for (n = 0; n < squashfs_cached_blks; n++) { -+ if (msblk->block_cache[i].block != SQUASHFS_USED_BLK) -+ break; -+ i = (i + 1) % squashfs_cached_blks; -+ } -+ -+ msblk->next_cache = (i + 1) % squashfs_cached_blks; -+ -+ if (msblk->block_cache[i].block == SQUASHFS_INVALID_BLK) { -+ msblk->block_cache[i].data = vmalloc(SQUASHFS_METADATA_SIZE); -+ if (msblk->block_cache[i].data == NULL) { -+ ERROR("Failed to allocate cache block\n"); -+ mutex_unlock(&msblk->block_cache_mutex); -+ goto out; -+ } -+ } -+ -+ msblk->block_cache[i].block = SQUASHFS_USED_BLK; -+ msblk->unused_cache_blks --; -+ mutex_unlock(&msblk->block_cache_mutex); -+ -+ msblk->block_cache[i].length = squashfs_read_data(s, -+ msblk->block_cache[i].data, block, 0, &next_index, -+ SQUASHFS_METADATA_SIZE); -+ -+ if (msblk->block_cache[i].length == 0) { -+ ERROR("Unable to read cache block [%llx:%x]\n", block, offset); -+ mutex_lock(&msblk->block_cache_mutex); -+ msblk->block_cache[i].block = SQUASHFS_INVALID_BLK; -+ msblk->unused_cache_blks ++; -+ smp_mb(); -+ vfree(msblk->block_cache[i].data); -+ wake_up(&msblk->waitq); -+ mutex_unlock(&msblk->block_cache_mutex); -+ goto out; -+ } -+ -+ mutex_lock(&msblk->block_cache_mutex); -+ msblk->block_cache[i].block = block; -+ msblk->block_cache[i].next_index = next_index; -+ msblk->unused_cache_blks ++; -+ smp_mb(); -+ wake_up(&msblk->waitq); -+ TRACE("Read cache block [%llx:%x]\n", block, offset); -+ } -+ -+ if (msblk->block_cache[i].block != block) { -+ mutex_unlock(&msblk->block_cache_mutex); -+ continue; -+ } -+ -+ bytes = msblk->block_cache[i].length - offset; -+ -+ if (bytes < 1) { -+ mutex_unlock(&msblk->block_cache_mutex); -+ goto out; -+ } else if (bytes >= length) { -+ if (buffer) -+ memcpy(buffer, msblk->block_cache[i].data + offset, length); -+ if (msblk->block_cache[i].length - offset == length) { -+ *next_block = msblk->block_cache[i].next_index; -+ *next_offset = 0; -+ } else { -+ *next_block = block; -+ *next_offset = offset + length; -+ } -+ mutex_unlock(&msblk->block_cache_mutex); -+ goto finish; -+ } else { -+ if (buffer) { -+ memcpy(buffer, msblk->block_cache[i].data + offset, bytes); -+ buffer = (char *) buffer + bytes; -+ } -+ block = msblk->block_cache[i].next_index; -+ mutex_unlock(&msblk->block_cache_mutex); -+ length -= bytes; -+ offset = 0; -+ } -+ } -+ -+finish: -+ return return_length; -+out: -+ return 0; -+} -+ -+ -+static int get_fragment_location(struct super_block *s, unsigned int fragment, -+ long long *fragment_start_block, -+ unsigned int *fragment_size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ long long start_block = -+ msblk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)]; -+ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment); -+ struct squashfs_fragment_entry fragment_entry; -+ -+ if (msblk->swap) { -+ struct squashfs_fragment_entry sfragment_entry; -+ -+ if (!squashfs_get_cached_block(s, &sfragment_entry, start_block, offset, -+ sizeof(sfragment_entry), &start_block, &offset)) -+ goto out; -+ SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry); -+ } else -+ if (!squashfs_get_cached_block(s, &fragment_entry, start_block, offset, -+ sizeof(fragment_entry), &start_block, &offset)) -+ goto out; -+ -+ *fragment_start_block = fragment_entry.start_block; -+ *fragment_size = fragment_entry.size; -+ -+ return 1; -+ -+out: -+ return 0; -+} -+ -+ -+SQSH_EXTERN void release_cached_fragment(struct squashfs_sb_info *msblk, -+ struct squashfs_fragment_cache *fragment) -+{ -+ mutex_lock(&msblk->fragment_mutex); -+ fragment->locked --; -+ if (fragment->locked == 0) { -+ msblk->unused_frag_blks ++; -+ smp_mb(); -+ wake_up(&msblk->fragment_wait_queue); -+ } -+ mutex_unlock(&msblk->fragment_mutex); -+} -+ -+ -+SQSH_EXTERN -+struct squashfs_fragment_cache *get_cached_fragment(struct super_block *s, -+ long long start_block, int length) -+{ -+ int i, n; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ while (1) { -+ mutex_lock(&msblk->fragment_mutex); -+ -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS && -+ msblk->fragment[i].block != start_block; i++); -+ -+ if (i == SQUASHFS_CACHED_FRAGMENTS) { -+ if (msblk->unused_frag_blks == 0) { -+ mutex_unlock(&msblk->fragment_mutex); -+ wait_event(msblk->fragment_wait_queue, msblk->unused_frag_blks); -+ continue; -+ } -+ -+ i = msblk->next_fragment; -+ for (n = 0; n < SQUASHFS_CACHED_FRAGMENTS; n++) { -+ if (msblk->fragment[i].locked == 0) -+ break; -+ i = (i + 1) % SQUASHFS_CACHED_FRAGMENTS; -+ } -+ -+ msblk->next_fragment = (msblk->next_fragment + 1) % -+ SQUASHFS_CACHED_FRAGMENTS; -+ -+ if (msblk->fragment[i].data == NULL) { -+ msblk->fragment[i].data = vmalloc(sblk->block_size); -+ if (msblk->fragment[i].data == NULL) { -+ ERROR("Failed to allocate fragment cache block\n"); -+ mutex_unlock(&msblk->fragment_mutex); -+ goto out; -+ } -+ } -+ -+ msblk->unused_frag_blks --; -+ msblk->fragment[i].block = SQUASHFS_INVALID_BLK; -+ msblk->fragment[i].locked = 1; -+ mutex_unlock(&msblk->fragment_mutex); -+ -+ msblk->fragment[i].length = squashfs_read_data(s, -+ msblk->fragment[i].data, start_block, length, NULL, -+ sblk->block_size); -+ -+ if (msblk->fragment[i].length == 0) { -+ ERROR("Unable to read fragment cache block [%llx]\n", start_block); -+ msblk->fragment[i].locked = 0; -+ msblk->unused_frag_blks ++; -+ smp_mb(); -+ wake_up(&msblk->fragment_wait_queue); -+ goto out; -+ } -+ -+ mutex_lock(&msblk->fragment_mutex); -+ msblk->fragment[i].block = start_block; -+ TRACE("New fragment %d, start block %lld, locked %d\n", -+ i, msblk->fragment[i].block, msblk->fragment[i].locked); -+ mutex_unlock(&msblk->fragment_mutex); -+ break; -+ } -+ -+ if (msblk->fragment[i].locked == 0) -+ msblk->unused_frag_blks --; -+ msblk->fragment[i].locked++; -+ mutex_unlock(&msblk->fragment_mutex); -+ TRACE("Got fragment %d, start block %lld, locked %d\n", i, -+ msblk->fragment[i].block, msblk->fragment[i].locked); -+ break; -+ } -+ -+ return &msblk->fragment[i]; -+ -+out: -+ return NULL; -+} -+ -+ -+static void squashfs_new_inode(struct squashfs_sb_info *msblk, struct inode *i, -+ struct squashfs_base_inode_header *inodeb) -+{ -+ i->i_ino = inodeb->inode_number; -+ i->i_mtime.tv_sec = inodeb->mtime; -+ i->i_atime.tv_sec = inodeb->mtime; -+ i->i_ctime.tv_sec = inodeb->mtime; -+ i->i_uid = msblk->uid[inodeb->uid]; -+ i->i_mode = inodeb->mode; -+ i->i_size = 0; -+ -+ if (inodeb->guid == SQUASHFS_GUIDS) -+ i->i_gid = i->i_uid; -+ else -+ i->i_gid = msblk->guid[inodeb->guid]; -+} -+ -+ -+static squashfs_inode_t squashfs_inode_lookup(struct super_block *s, int ino) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ long long start = msblk->inode_lookup_table[SQUASHFS_LOOKUP_BLOCK(ino - 1)]; -+ int offset = SQUASHFS_LOOKUP_BLOCK_OFFSET(ino - 1); -+ squashfs_inode_t inode; -+ -+ TRACE("Entered squashfs_inode_lookup, inode_number = %d\n", ino); -+ -+ if (msblk->swap) { -+ squashfs_inode_t sinode; -+ -+ if (!squashfs_get_cached_block(s, &sinode, start, offset, -+ sizeof(sinode), &start, &offset)) -+ goto out; -+ SQUASHFS_SWAP_INODE_T((&inode), &sinode); -+ } else if (!squashfs_get_cached_block(s, &inode, start, offset, -+ sizeof(inode), &start, &offset)) -+ goto out; -+ -+ TRACE("squashfs_inode_lookup, inode = 0x%llx\n", inode); -+ -+ return inode; -+ -+out: -+ return SQUASHFS_INVALID_BLK; -+} -+ -+ -+static void vfs_read_inode(struct inode *i) -+{ -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ squashfs_inode_t inode = squashfs_inode_lookup(i->i_sb, i->i_ino); -+ -+ TRACE("Entered vfs_read_inode\n"); -+ -+ if(inode != SQUASHFS_INVALID_BLK) -+ (msblk->read_inode)(i, inode); -+} -+ -+ -+static struct dentry *squashfs_get_parent(struct dentry *child) -+{ -+ struct inode *i = child->d_inode; -+ struct inode *parent = iget(i->i_sb, SQUASHFS_I(i)->u.s2.parent_inode); -+ struct dentry *rv; -+ -+ TRACE("Entered squashfs_get_parent\n"); -+ -+ if(parent == NULL) { -+ rv = ERR_PTR(-EACCES); -+ goto out; -+ } -+ -+ rv = d_alloc_anon(parent); -+ if(rv == NULL) -+ rv = ERR_PTR(-ENOMEM); -+ -+out: -+ return rv; -+} -+ -+ -+SQSH_EXTERN struct inode *squashfs_iget(struct super_block *s, -+ squashfs_inode_t inode, unsigned int inode_number) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct inode *i = iget_locked(s, inode_number); -+ -+ TRACE("Entered squashfs_iget\n"); -+ -+ if(i && (i->i_state & I_NEW)) { -+ (msblk->read_inode)(i, inode); -+ unlock_new_inode(i); -+ } -+ -+ return i; -+} -+ -+ -+static int squashfs_read_inode(struct inode *i, squashfs_inode_t inode) -+{ -+ struct super_block *s = i->i_sb; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long block = SQUASHFS_INODE_BLK(inode) + sblk->inode_table_start; -+ unsigned int offset = SQUASHFS_INODE_OFFSET(inode); -+ long long next_block; -+ unsigned int next_offset; -+ union squashfs_inode_header id, sid; -+ struct squashfs_base_inode_header *inodeb = &id.base, *sinodeb = &sid.base; -+ -+ TRACE("Entered squashfs_read_inode\n"); -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, sinodeb, block, offset, -+ sizeof(*sinodeb), &next_block, &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_BASE_INODE_HEADER(inodeb, sinodeb, sizeof(*sinodeb)); -+ } else -+ if (!squashfs_get_cached_block(s, inodeb, block, offset, -+ sizeof(*inodeb), &next_block, &next_offset)) -+ goto failed_read; -+ -+ squashfs_new_inode(msblk, i, inodeb); -+ -+ switch(inodeb->inode_type) { -+ case SQUASHFS_FILE_TYPE: { -+ unsigned int frag_size; -+ long long frag_blk; -+ struct squashfs_reg_inode_header *inodep = &id.reg; -+ struct squashfs_reg_inode_header *sinodep = &sid.reg; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, sinodep, block, offset, -+ sizeof(*sinodep), &next_block, &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_REG_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, inodep, block, offset, -+ sizeof(*inodep), &next_block, &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG) -+ if(!get_fragment_location(s, inodep->fragment, &frag_blk, -+ &frag_size)) -+ goto failed_read; -+ -+ i->i_nlink = 1; -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ i->i_data.a_ops = &squashfs_aops; -+ -+ TRACE("File inode %x:%x, start_block %llx, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_LREG_TYPE: { -+ unsigned int frag_size; -+ long long frag_blk; -+ struct squashfs_lreg_inode_header *inodep = &id.lreg; -+ struct squashfs_lreg_inode_header *sinodep = &sid.lreg; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, sinodep, block, offset, -+ sizeof(*sinodep), &next_block, &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LREG_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, inodep, block, offset, -+ sizeof(*inodep), &next_block, &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG) -+ if (!get_fragment_location(s, inodep->fragment, &frag_blk, -+ &frag_size)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ i->i_data.a_ops = &squashfs_aops; -+ -+ TRACE("File inode %x:%x, start_block %llx, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_DIR_TYPE: { -+ struct squashfs_dir_inode_header *inodep = &id.dir; -+ struct squashfs_dir_inode_header *sinodep = &sid.dir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, sinodep, block, offset, -+ sizeof(*sinodep), &next_block, &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DIR_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, inodep, block, offset, -+ sizeof(*inodep), &next_block, &next_offset)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops; -+ i->i_fop = &squashfs_dir_ops; -+ i->i_mode |= S_IFDIR; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = 0; -+ SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode; -+ -+ TRACE("Directory inode %x:%x, start_block %x, offset " -+ "%x\n", SQUASHFS_INODE_BLK(inode), -+ offset, inodep->start_block, -+ inodep->offset); -+ break; -+ } -+ case SQUASHFS_LDIR_TYPE: { -+ struct squashfs_ldir_inode_header *inodep = &id.ldir; -+ struct squashfs_ldir_inode_header *sinodep = &sid.ldir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, sinodep, block, offset, -+ sizeof(*sinodep), &next_block, &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LDIR_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, inodep, block, offset, -+ sizeof(*inodep), &next_block, &next_offset)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops; -+ i->i_fop = &squashfs_dir_ops; -+ i->i_mode |= S_IFDIR; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_start = next_block; -+ SQUASHFS_I(i)->u.s2.directory_index_offset = next_offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = inodep->i_count; -+ SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode; -+ -+ TRACE("Long directory inode %x:%x, start_block %x, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, inodep->offset); -+ break; -+ } -+ case SQUASHFS_SYMLINK_TYPE: { -+ struct squashfs_symlink_inode_header *inodep = &id.symlink; -+ struct squashfs_symlink_inode_header *sinodep = &sid.symlink; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, sinodep, block, offset, -+ sizeof(*sinodep), &next_block, &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_SYMLINK_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, inodep, block, offset, -+ sizeof(*inodep), &next_block, &next_offset)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_size = inodep->symlink_size; -+ i->i_op = &page_symlink_inode_operations; -+ i->i_data.a_ops = &squashfs_symlink_aops; -+ i->i_mode |= S_IFLNK; -+ SQUASHFS_I(i)->start_block = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ -+ TRACE("Symbolic link inode %x:%x, start_block %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ next_block, next_offset); -+ break; -+ } -+ case SQUASHFS_BLKDEV_TYPE: -+ case SQUASHFS_CHRDEV_TYPE: { -+ struct squashfs_dev_inode_header *inodep = &id.dev; -+ struct squashfs_dev_inode_header *sinodep = &sid.dev; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, sinodep, block, offset, -+ sizeof(*sinodep), &next_block, &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DEV_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, inodep, block, offset, -+ sizeof(*inodep), &next_block, &next_offset)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_mode |= (inodeb->inode_type == SQUASHFS_CHRDEV_TYPE) ? -+ S_IFCHR : S_IFBLK; -+ init_special_inode(i, i->i_mode, old_decode_dev(inodep->rdev)); -+ -+ TRACE("Device inode %x:%x, rdev %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, inodep->rdev); -+ break; -+ } -+ case SQUASHFS_FIFO_TYPE: -+ case SQUASHFS_SOCKET_TYPE: { -+ struct squashfs_ipc_inode_header *inodep = &id.ipc; -+ struct squashfs_ipc_inode_header *sinodep = &sid.ipc; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, sinodep, block, offset, -+ sizeof(*sinodep), &next_block, &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_IPC_INODE_HEADER(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, inodep, block, offset, -+ sizeof(*inodep), &next_block, &next_offset)) -+ goto failed_read; -+ -+ i->i_nlink = inodep->nlink; -+ i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE) -+ ? S_IFIFO : S_IFSOCK; -+ init_special_inode(i, i->i_mode, 0); -+ break; -+ } -+ default: -+ ERROR("Unknown inode type %d in squashfs_iget!\n", -+ inodeb->inode_type); -+ goto failed_read1; -+ } -+ -+ return 1; -+ -+failed_read: -+ ERROR("Unable to read inode [%llx:%x]\n", block, offset); -+ -+failed_read1: -+ make_bad_inode(i); -+ return 0; -+} -+ -+ -+static int read_inode_lookup_table(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned int length = SQUASHFS_LOOKUP_BLOCK_BYTES(sblk->inodes); -+ -+ TRACE("In read_inode_lookup_table, length %d\n", length); -+ -+ /* Allocate inode lookup table */ -+ msblk->inode_lookup_table = kmalloc(length, GFP_KERNEL); -+ if (msblk->inode_lookup_table == NULL) { -+ ERROR("Failed to allocate inode lookup table\n"); -+ return 0; -+ } -+ -+ if (!squashfs_read_data(s, (char *) msblk->inode_lookup_table, -+ sblk->lookup_table_start, length | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length)) { -+ ERROR("unable to read inode lookup table\n"); -+ return 0; -+ } -+ -+ if (msblk->swap) { -+ int i; -+ long long block; -+ -+ for (i = 0; i < SQUASHFS_LOOKUP_BLOCKS(sblk->inodes); i++) { -+ /* XXX */ -+ SQUASHFS_SWAP_LOOKUP_BLOCKS((&block), -+ &msblk->inode_lookup_table[i], 1); -+ msblk->inode_lookup_table[i] = block; -+ } -+ } -+ -+ return 1; -+} -+ -+ -+static int read_fragment_index_table(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned int length = SQUASHFS_FRAGMENT_INDEX_BYTES(sblk->fragments); -+ -+ if(length == 0) -+ return 1; -+ -+ /* Allocate fragment index table */ -+ msblk->fragment_index = kmalloc(length, GFP_KERNEL); -+ if (msblk->fragment_index == NULL) { -+ ERROR("Failed to allocate fragment index table\n"); -+ return 0; -+ } -+ -+ if (!squashfs_read_data(s, (char *) msblk->fragment_index, -+ sblk->fragment_table_start, length | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length)) { -+ ERROR("unable to read fragment index table\n"); -+ return 0; -+ } -+ -+ if (msblk->swap) { -+ int i; -+ long long fragment; -+ -+ for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sblk->fragments); i++) { -+ /* XXX */ -+ SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment), -+ &msblk->fragment_index[i], 1); -+ msblk->fragment_index[i] = fragment; -+ } -+ } -+ -+ return 1; -+} -+ -+ -+static int readahead_metadata(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ int i; -+ -+ squashfs_cached_blks = SQUASHFS_CACHED_BLKS; -+ -+ /* Init inode_table block pointer array */ -+ msblk->block_cache = kmalloc(sizeof(struct squashfs_cache) * -+ squashfs_cached_blks, GFP_KERNEL); -+ if (msblk->block_cache == NULL) { -+ ERROR("Failed to allocate block cache\n"); -+ goto failed; -+ } -+ -+ for (i = 0; i < squashfs_cached_blks; i++) -+ msblk->block_cache[i].block = SQUASHFS_INVALID_BLK; -+ -+ msblk->next_cache = 0; -+ msblk->unused_cache_blks = squashfs_cached_blks; -+ -+ return 1; -+ -+failed: -+ return 0; -+} -+ -+ -+static int supported_squashfs_filesystem(struct squashfs_sb_info *msblk, int silent) -+{ -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ msblk->read_inode = squashfs_read_inode; -+ msblk->read_blocklist = read_blocklist; -+ msblk->read_fragment_index_table = read_fragment_index_table; -+ -+ if (sblk->s_major == 1) { -+ if (!squashfs_1_0_supported(msblk)) { -+ SERROR("Major/Minor mismatch, Squashfs 1.0 filesystems " -+ "are unsupported\n"); -+ SERROR("Please recompile with Squashfs 1.0 support enabled\n"); -+ return 0; -+ } -+ } else if (sblk->s_major == 2) { -+ if (!squashfs_2_0_supported(msblk)) { -+ SERROR("Major/Minor mismatch, Squashfs 2.0 filesystems " -+ "are unsupported\n"); -+ SERROR("Please recompile with Squashfs 2.0 support enabled\n"); -+ return 0; -+ } -+ } else if(sblk->s_major != SQUASHFS_MAJOR || sblk->s_minor > -+ SQUASHFS_MINOR) { -+ SERROR("Major/Minor mismatch, trying to mount newer %d.%d " -+ "filesystem\n", sblk->s_major, sblk->s_minor); -+ SERROR("Please update your kernel\n"); -+ return 0; -+ } -+ -+ return 1; -+} -+ -+ -+static int squashfs_fill_super(struct super_block *s, void *data, int silent) -+{ -+ struct squashfs_sb_info *msblk; -+ struct squashfs_super_block *sblk; -+ int i; -+ char b[BDEVNAME_SIZE]; -+ struct inode *root; -+ -+ TRACE("Entered squashfs_fill_superblock\n"); -+ -+ s->s_fs_info = kzalloc(sizeof(struct squashfs_sb_info), GFP_KERNEL); -+ if (s->s_fs_info == NULL) { -+ ERROR("Failed to allocate superblock\n"); -+ goto failure; -+ } -+ msblk = s->s_fs_info; -+ -+ msblk->stream.workspace = vmalloc(zlib_inflate_workspacesize()); -+ if (msblk->stream.workspace == NULL) { -+ ERROR("Failed to allocate zlib workspace\n"); -+ goto failure; -+ } -+ sblk = &msblk->sblk; -+ -+ msblk->devblksize = sb_min_blocksize(s, BLOCK_SIZE); -+ msblk->devblksize_log2 = ffz(~msblk->devblksize); -+ -+ mutex_init(&msblk->read_data_mutex); -+ mutex_init(&msblk->read_page_mutex); -+ mutex_init(&msblk->block_cache_mutex); -+ mutex_init(&msblk->fragment_mutex); -+ mutex_init(&msblk->meta_index_mutex); -+ -+ init_waitqueue_head(&msblk->waitq); -+ init_waitqueue_head(&msblk->fragment_wait_queue); -+ -+ /* sblk->bytes_used is checked in squashfs_read_data to ensure reads are not -+ * beyond filesystem end. As we're using squashfs_read_data to read sblk here, -+ * first set sblk->bytes_used to a useful value */ -+ sblk->bytes_used = sizeof(struct squashfs_super_block); -+ if (!squashfs_read_data(s, (char *) sblk, SQUASHFS_START, -+ sizeof(struct squashfs_super_block) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, sizeof(struct squashfs_super_block))) { -+ SERROR("unable to read superblock\n"); -+ goto failed_mount; -+ } -+ -+ /* Check it is a SQUASHFS superblock */ -+ if ((s->s_magic = sblk->s_magic) != SQUASHFS_MAGIC) { -+ if (sblk->s_magic == SQUASHFS_MAGIC_SWAP) { -+ struct squashfs_super_block ssblk; -+ -+ WARNING("Mounting a different endian SQUASHFS filesystem on %s\n", -+ bdevname(s->s_bdev, b)); -+ -+ SQUASHFS_SWAP_SUPER_BLOCK(&ssblk, sblk); -+ memcpy(sblk, &ssblk, sizeof(struct squashfs_super_block)); -+ msblk->swap = 1; -+ } else { -+ SERROR("Can't find a SQUASHFS superblock on %s\n", -+ bdevname(s->s_bdev, b)); -+ goto failed_mount; -+ } -+ } -+ -+ /* Check the MAJOR & MINOR versions */ -+ if(!supported_squashfs_filesystem(msblk, silent)) -+ goto failed_mount; -+ -+ /* Check the filesystem does not extend beyond the end of the -+ block device */ -+ if(sblk->bytes_used < 0 || sblk->bytes_used > i_size_read(s->s_bdev->bd_inode)) -+ goto failed_mount; -+ -+ /* Check the root inode for sanity */ -+ if (SQUASHFS_INODE_OFFSET(sblk->root_inode) > SQUASHFS_METADATA_SIZE) -+ goto failed_mount; -+ -+ TRACE("Found valid superblock on %s\n", bdevname(s->s_bdev, b)); -+ TRACE("Inodes are %scompressed\n", SQUASHFS_UNCOMPRESSED_INODES(sblk->flags) -+ ? "un" : ""); -+ TRACE("Data is %scompressed\n", SQUASHFS_UNCOMPRESSED_DATA(sblk->flags) -+ ? "un" : ""); -+ TRACE("Check data is %spresent in the filesystem\n", -+ SQUASHFS_CHECK_DATA(sblk->flags) ? "" : "not "); -+ TRACE("Filesystem size %lld bytes\n", sblk->bytes_used); -+ TRACE("Block size %d\n", sblk->block_size); -+ TRACE("Number of inodes %d\n", sblk->inodes); -+ if (sblk->s_major > 1) -+ TRACE("Number of fragments %d\n", sblk->fragments); -+ TRACE("Number of uids %d\n", sblk->no_uids); -+ TRACE("Number of gids %d\n", sblk->no_guids); -+ TRACE("sblk->inode_table_start %llx\n", sblk->inode_table_start); -+ TRACE("sblk->directory_table_start %llx\n", sblk->directory_table_start); -+ if (sblk->s_major > 1) -+ TRACE("sblk->fragment_table_start %llx\n", sblk->fragment_table_start); -+ TRACE("sblk->uid_start %llx\n", sblk->uid_start); -+ -+ s->s_maxbytes = MAX_LFS_FILESIZE; -+ s->s_flags |= MS_RDONLY; -+ s->s_op = &squashfs_super_ops; -+ -+ if (readahead_metadata(s) == 0) -+ goto failed_mount; -+ -+ /* Allocate read_page block */ -+ msblk->read_page = vmalloc(sblk->block_size); -+ if (msblk->read_page == NULL) { -+ ERROR("Failed to allocate read_page block\n"); -+ goto failed_mount; -+ } -+ -+ /* Allocate uid and gid tables */ -+ msblk->uid = kmalloc((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int), GFP_KERNEL); -+ if (msblk->uid == NULL) { -+ ERROR("Failed to allocate uid/gid table\n"); -+ goto failed_mount; -+ } -+ msblk->guid = msblk->uid + sblk->no_uids; -+ -+ if (msblk->swap) { -+ unsigned int suid[sblk->no_uids + sblk->no_guids]; -+ -+ if (!squashfs_read_data(s, (char *) &suid, sblk->uid_start, -+ ((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int)) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, (sblk->no_uids + sblk->no_guids) * sizeof(unsigned int))) { -+ ERROR("unable to read uid/gid table\n"); -+ goto failed_mount; -+ } -+ -+ SQUASHFS_SWAP_DATA(msblk->uid, suid, (sblk->no_uids + -+ sblk->no_guids), (sizeof(unsigned int) * 8)); -+ } else -+ if (!squashfs_read_data(s, (char *) msblk->uid, sblk->uid_start, -+ ((sblk->no_uids + sblk->no_guids) * -+ sizeof(unsigned int)) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, (sblk->no_uids + sblk->no_guids) * sizeof(unsigned int))) { -+ ERROR("unable to read uid/gid table\n"); -+ goto failed_mount; -+ } -+ -+ -+ if (sblk->s_major == 1 && squashfs_1_0_supported(msblk)) -+ goto allocate_root; -+ -+ msblk->fragment = kzalloc(sizeof(struct squashfs_fragment_cache) * -+ SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL); -+ if (msblk->fragment == NULL) { -+ ERROR("Failed to allocate fragment block cache\n"); -+ goto failed_mount; -+ } -+ -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) { -+ msblk->fragment[i].block = SQUASHFS_INVALID_BLK; -+ } -+ -+ msblk->next_fragment = 0; -+ msblk->unused_frag_blks = SQUASHFS_CACHED_FRAGMENTS; -+ -+ /* Allocate and read fragment index table */ -+ if (msblk->read_fragment_index_table(s) == 0) -+ goto failed_mount; -+ -+ if(sblk->s_major < 3 || sblk->lookup_table_start == SQUASHFS_INVALID_BLK) -+ goto allocate_root; -+ -+ /* Allocate and read inode lookup table */ -+ if (read_inode_lookup_table(s) == 0) -+ goto failed_mount; -+ -+ s->s_op = &squashfs_export_super_ops; -+ s->s_export_op = &squashfs_export_ops; -+ -+allocate_root: -+ root = new_inode(s); -+ if ((msblk->read_inode)(root, sblk->root_inode) == 0) -+ goto failed_mount; -+ insert_inode_hash(root); -+ -+ s->s_root = d_alloc_root(root); -+ if (s->s_root == NULL) { -+ ERROR("Root inode create failed\n"); -+ iput(root); -+ goto failed_mount; -+ } -+ -+ TRACE("Leaving squashfs_fill_super\n"); -+ return 0; -+ -+failed_mount: -+ kfree(msblk->inode_lookup_table); -+ kfree(msblk->fragment_index); -+ kfree(msblk->fragment); -+ kfree(msblk->uid); -+ vfree(msblk->read_page); -+ kfree(msblk->block_cache); -+ kfree(msblk->fragment_index_2); -+ vfree(msblk->stream.workspace); -+ kfree(s->s_fs_info); -+ s->s_fs_info = NULL; -+ return -EINVAL; -+ -+failure: -+ return -ENOMEM; -+} -+ -+ -+static int squashfs_statfs(struct dentry *dentry, struct kstatfs *buf) -+{ -+ struct squashfs_sb_info *msblk = dentry->d_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ TRACE("Entered squashfs_statfs\n"); -+ -+ buf->f_type = SQUASHFS_MAGIC; -+ buf->f_bsize = sblk->block_size; -+ buf->f_blocks = ((sblk->bytes_used - 1) >> sblk->block_log) + 1; -+ buf->f_bfree = buf->f_bavail = 0; -+ buf->f_files = sblk->inodes; -+ buf->f_ffree = 0; -+ buf->f_namelen = SQUASHFS_NAME_LEN; -+ -+ return 0; -+} -+ -+ -+static int squashfs_symlink_readpage(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ int index = page->index << PAGE_CACHE_SHIFT, length, bytes, avail_bytes; -+ long long block = SQUASHFS_I(inode)->start_block; -+ int offset = SQUASHFS_I(inode)->offset; -+ void *pageaddr = kmap(page); -+ -+ TRACE("Entered squashfs_symlink_readpage, page index %ld, start block " -+ "%llx, offset %x\n", page->index, -+ SQUASHFS_I(inode)->start_block, -+ SQUASHFS_I(inode)->offset); -+ -+ for (length = 0; length < index; length += bytes) { -+ bytes = squashfs_get_cached_block(inode->i_sb, NULL, block, -+ offset, PAGE_CACHE_SIZE, &block, &offset); -+ if (bytes == 0) { -+ ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset); -+ goto skip_read; -+ } -+ } -+ -+ if (length != index) { -+ ERROR("(squashfs_symlink_readpage) length != index\n"); -+ bytes = 0; -+ goto skip_read; -+ } -+ -+ avail_bytes = min_t(int, i_size_read(inode) - length, PAGE_CACHE_SIZE); -+ -+ bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block, offset, -+ avail_bytes, &block, &offset); -+ if (bytes == 0) -+ ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset); -+ -+skip_read: -+ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); -+ kunmap(page); -+ flush_dcache_page(page); -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ return 0; -+} -+ -+ -+struct meta_index *locate_meta_index(struct inode *inode, int index, int offset) -+{ -+ struct meta_index *meta = NULL; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ int i; -+ -+ mutex_lock(&msblk->meta_index_mutex); -+ -+ TRACE("locate_meta_index: index %d, offset %d\n", index, offset); -+ -+ if (msblk->meta_index == NULL) -+ goto not_allocated; -+ -+ for (i = 0; i < SQUASHFS_META_NUMBER; i ++) { -+ if (msblk->meta_index[i].inode_number == inode->i_ino && -+ msblk->meta_index[i].offset >= offset && -+ msblk->meta_index[i].offset <= index && -+ msblk->meta_index[i].locked == 0) { -+ TRACE("locate_meta_index: entry %d, offset %d\n", i, -+ msblk->meta_index[i].offset); -+ meta = &msblk->meta_index[i]; -+ offset = meta->offset; -+ } -+ } -+ -+ if (meta) -+ meta->locked = 1; -+ -+not_allocated: -+ mutex_unlock(&msblk->meta_index_mutex); -+ -+ return meta; -+} -+ -+ -+struct meta_index *empty_meta_index(struct inode *inode, int offset, int skip) -+{ -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct meta_index *meta = NULL; -+ int i; -+ -+ mutex_lock(&msblk->meta_index_mutex); -+ -+ TRACE("empty_meta_index: offset %d, skip %d\n", offset, skip); -+ -+ if (msblk->meta_index == NULL) { -+ msblk->meta_index = kmalloc(sizeof(struct meta_index) * -+ SQUASHFS_META_NUMBER, GFP_KERNEL); -+ if (msblk->meta_index == NULL) { -+ ERROR("Failed to allocate meta_index\n"); -+ goto failed; -+ } -+ for (i = 0; i < SQUASHFS_META_NUMBER; i++) { -+ msblk->meta_index[i].inode_number = 0; -+ msblk->meta_index[i].locked = 0; -+ } -+ msblk->next_meta_index = 0; -+ } -+ -+ for (i = SQUASHFS_META_NUMBER; i && -+ msblk->meta_index[msblk->next_meta_index].locked; i --) -+ msblk->next_meta_index = (msblk->next_meta_index + 1) % -+ SQUASHFS_META_NUMBER; -+ -+ if (i == 0) { -+ TRACE("empty_meta_index: failed!\n"); -+ goto failed; -+ } -+ -+ TRACE("empty_meta_index: returned meta entry %d, %p\n", -+ msblk->next_meta_index, -+ &msblk->meta_index[msblk->next_meta_index]); -+ -+ meta = &msblk->meta_index[msblk->next_meta_index]; -+ msblk->next_meta_index = (msblk->next_meta_index + 1) % -+ SQUASHFS_META_NUMBER; -+ -+ meta->inode_number = inode->i_ino; -+ meta->offset = offset; -+ meta->skip = skip; -+ meta->entries = 0; -+ meta->locked = 1; -+ -+failed: -+ mutex_unlock(&msblk->meta_index_mutex); -+ return meta; -+} -+ -+ -+void release_meta_index(struct inode *inode, struct meta_index *meta) -+{ -+ meta->locked = 0; -+ smp_mb(); -+} -+ -+ -+static int read_block_index(struct super_block *s, int blocks, char *block_list, -+ long long *start_block, int *offset) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ unsigned int *block_listp; -+ int block = 0; -+ -+ if (msblk->swap) { -+ char sblock_list[blocks << 2]; -+ -+ if (!squashfs_get_cached_block(s, sblock_list, *start_block, -+ *offset, blocks << 2, start_block, offset)) { -+ ERROR("Fail reading block list [%llx:%x]\n", *start_block, *offset); -+ goto failure; -+ } -+ SQUASHFS_SWAP_INTS(((unsigned int *)block_list), -+ ((unsigned int *)sblock_list), blocks); -+ } else { -+ if (!squashfs_get_cached_block(s, block_list, *start_block, -+ *offset, blocks << 2, start_block, offset)) { -+ ERROR("Fail reading block list [%llx:%x]\n", *start_block, *offset); -+ goto failure; -+ } -+ } -+ -+ for (block_listp = (unsigned int *) block_list; blocks; -+ block_listp++, blocks --) -+ block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp); -+ -+ return block; -+ -+failure: -+ return -1; -+} -+ -+ -+#define SIZE 256 -+ -+static inline int calculate_skip(int blocks) { -+ int skip = (blocks - 1) / ((SQUASHFS_SLOTS * SQUASHFS_META_ENTRIES + 1) * SQUASHFS_META_INDEXES); -+ return skip >= 7 ? 7 : skip + 1; -+} -+ -+ -+static int get_meta_index(struct inode *inode, int index, -+ long long *index_block, int *index_offset, -+ long long *data_block, char *block_list) -+{ -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int skip = calculate_skip(i_size_read(inode) >> sblk->block_log); -+ int offset = 0; -+ struct meta_index *meta; -+ struct meta_entry *meta_entry; -+ long long cur_index_block = SQUASHFS_I(inode)->u.s1.block_list_start; -+ int cur_offset = SQUASHFS_I(inode)->offset; -+ long long cur_data_block = SQUASHFS_I(inode)->start_block; -+ int i; -+ -+ index /= SQUASHFS_META_INDEXES * skip; -+ -+ while (offset < index) { -+ meta = locate_meta_index(inode, index, offset + 1); -+ -+ if (meta == NULL) { -+ meta = empty_meta_index(inode, offset + 1, skip); -+ if (meta == NULL) -+ goto all_done; -+ } else { -+ if(meta->entries == 0) -+ goto failed; -+ /* XXX */ -+ offset = index < meta->offset + meta->entries ? index : -+ meta->offset + meta->entries - 1; -+ /* XXX */ -+ meta_entry = &meta->meta_entry[offset - meta->offset]; -+ cur_index_block = meta_entry->index_block + sblk->inode_table_start; -+ cur_offset = meta_entry->offset; -+ cur_data_block = meta_entry->data_block; -+ TRACE("get_meta_index: offset %d, meta->offset %d, " -+ "meta->entries %d\n", offset, meta->offset, meta->entries); -+ TRACE("get_meta_index: index_block 0x%llx, offset 0x%x" -+ " data_block 0x%llx\n", cur_index_block, -+ cur_offset, cur_data_block); -+ } -+ -+ for (i = meta->offset + meta->entries; i <= index && -+ i < meta->offset + SQUASHFS_META_ENTRIES; i++) { -+ int blocks = skip * SQUASHFS_META_INDEXES; -+ -+ while (blocks) { -+ int block = blocks > (SIZE >> 2) ? (SIZE >> 2) : blocks; -+ int res = read_block_index(inode->i_sb, block, block_list, -+ &cur_index_block, &cur_offset); -+ -+ if (res == -1) -+ goto failed; -+ -+ cur_data_block += res; -+ blocks -= block; -+ } -+ -+ meta_entry = &meta->meta_entry[i - meta->offset]; -+ meta_entry->index_block = cur_index_block - sblk->inode_table_start; -+ meta_entry->offset = cur_offset; -+ meta_entry->data_block = cur_data_block; -+ meta->entries ++; -+ offset ++; -+ } -+ -+ TRACE("get_meta_index: meta->offset %d, meta->entries %d\n", -+ meta->offset, meta->entries); -+ -+ release_meta_index(inode, meta); -+ } -+ -+all_done: -+ *index_block = cur_index_block; -+ *index_offset = cur_offset; -+ *data_block = cur_data_block; -+ -+ return offset * SQUASHFS_META_INDEXES * skip; -+ -+failed: -+ release_meta_index(inode, meta); -+ return -1; -+} -+ -+ -+static long long read_blocklist(struct inode *inode, int index, -+ int readahead_blks, char *block_list, -+ unsigned short **block_p, unsigned int *bsize) -+{ -+ long long block_ptr; -+ int offset; -+ long long block; -+ int res = get_meta_index(inode, index, &block_ptr, &offset, &block, -+ block_list); -+ -+ TRACE("read_blocklist: res %d, index %d, block_ptr 0x%llx, offset" -+ " 0x%x, block 0x%llx\n", res, index, block_ptr, offset, block); -+ -+ if(res == -1) -+ goto failure; -+ -+ index -= res; -+ -+ while (index) { -+ int blocks = index > (SIZE >> 2) ? (SIZE >> 2) : index; -+ int res = read_block_index(inode->i_sb, blocks, block_list, -+ &block_ptr, &offset); -+ if (res == -1) -+ goto failure; -+ block += res; -+ index -= blocks; -+ } -+ -+ if (read_block_index(inode->i_sb, 1, block_list, &block_ptr, &offset) == -1) -+ goto failure; -+ *bsize = *((unsigned int *) block_list); -+ -+ return block; -+ -+failure: -+ return 0; -+} -+ -+ -+static int squashfs_readpage(struct file *file, struct page *page) -+{ -+ struct inode *inode = page->mapping->host; -+ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned char *block_list = NULL; -+ long long block; -+ unsigned int bsize, i; -+ int bytes; -+ int index = page->index >> (sblk->block_log - PAGE_CACHE_SHIFT); -+ void *pageaddr; -+ struct squashfs_fragment_cache *fragment = NULL; -+ char *data_ptr = msblk->read_page; -+ -+ int mask = (1 << (sblk->block_log - PAGE_CACHE_SHIFT)) - 1; -+ int start_index = page->index & ~mask; -+ int end_index = start_index | mask; -+ int file_end = i_size_read(inode) >> sblk->block_log; -+ int sparse = 0; -+ -+ TRACE("Entered squashfs_readpage, page index %lx, start block %llx\n", -+ page->index, SQUASHFS_I(inode)->start_block); -+ -+ if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> -+ PAGE_CACHE_SHIFT)) -+ goto out; -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || index < file_end) { -+ block_list = kmalloc(SIZE, GFP_KERNEL); -+ if (block_list == NULL) { -+ ERROR("Failed to allocate block_list\n"); -+ goto error_out; -+ } -+ -+ block = (msblk->read_blocklist)(inode, index, 1, block_list, NULL, &bsize); -+ if (block == 0) -+ goto error_out; -+ -+ if (bsize == 0) { /* hole */ -+ bytes = index == file_end ? -+ (i_size_read(inode) & (sblk->block_size - 1)) : sblk->block_size; -+ sparse = 1; -+ } else { -+ mutex_lock(&msblk->read_page_mutex); -+ -+ bytes = squashfs_read_data(inode->i_sb, msblk->read_page, block, -+ bsize, NULL, sblk->block_size); -+ -+ if (bytes == 0) { -+ ERROR("Unable to read page, block %llx, size %x\n", block, bsize); -+ mutex_unlock(&msblk->read_page_mutex); -+ goto error_out; -+ } -+ } -+ } else { -+ fragment = get_cached_fragment(inode->i_sb, -+ SQUASHFS_I(inode)-> u.s1.fragment_start_block, -+ SQUASHFS_I(inode)->u.s1.fragment_size); -+ -+ if (fragment == NULL) { -+ ERROR("Unable to read page, block %llx, size %x\n", -+ SQUASHFS_I(inode)->u.s1.fragment_start_block, -+ (int) SQUASHFS_I(inode)->u.s1.fragment_size); -+ goto error_out; -+ } -+ bytes = i_size_read(inode) & (sblk->block_size - 1); -+ data_ptr = fragment->data + SQUASHFS_I(inode)->u.s1.fragment_offset; -+ } -+ -+ for (i = start_index; i <= end_index && bytes > 0; i++, -+ bytes -= PAGE_CACHE_SIZE, data_ptr += PAGE_CACHE_SIZE) { -+ struct page *push_page; -+ int avail = sparse ? 0 : min_t(unsigned int, bytes, PAGE_CACHE_SIZE); -+ -+ TRACE("bytes %d, i %d, available_bytes %d\n", bytes, i, avail); -+ -+ push_page = (i == page->index) ? page : -+ grab_cache_page_nowait(page->mapping, i); -+ -+ if (!push_page) -+ continue; -+ -+ if (PageUptodate(push_page)) -+ goto skip_page; -+ -+ pageaddr = kmap_atomic(push_page, KM_USER0); -+ memcpy(pageaddr, data_ptr, avail); -+ memset(pageaddr + avail, 0, PAGE_CACHE_SIZE - avail); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(push_page); -+ SetPageUptodate(push_page); -+skip_page: -+ unlock_page(push_page); -+ if(i != page->index) -+ page_cache_release(push_page); -+ } -+ -+ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK -+ || index < file_end) { -+ if (!sparse) -+ mutex_unlock(&msblk->read_page_mutex); -+ kfree(block_list); -+ } else -+ release_cached_fragment(msblk, fragment); -+ -+ return 0; -+ -+error_out: -+ SetPageError(page); -+out: -+ pageaddr = kmap_atomic(page, KM_USER0); -+ memset(pageaddr, 0, PAGE_CACHE_SIZE); -+ kunmap_atomic(pageaddr, KM_USER0); -+ flush_dcache_page(page); -+ if (!PageError(page)) -+ SetPageUptodate(page); -+ unlock_page(page); -+ -+ kfree(block_list); -+ return 0; -+} -+ -+ -+static int get_dir_index_using_offset(struct super_block *s, -+ long long *next_block, unsigned int *next_offset, -+ long long index_start, unsigned int index_offset, int i_count, -+ long long f_pos) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index index; -+ -+ TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n", -+ i_count, (unsigned int) f_pos); -+ -+ f_pos =- 3; -+ if (f_pos == 0) -+ goto finish; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index sindex; -+ squashfs_get_cached_block(s, &sindex, index_start, index_offset, -+ sizeof(sindex), &index_start, &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX(&index, &sindex); -+ } else -+ squashfs_get_cached_block(s, &index, index_start, index_offset, -+ sizeof(index), &index_start, &index_offset); -+ -+ if (index.index > f_pos) -+ break; -+ -+ squashfs_get_cached_block(s, NULL, index_start, index_offset, -+ index.size + 1, &index_start, &index_offset); -+ -+ length = index.index; -+ *next_block = index.start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ -+finish: -+ return length + 3; -+} -+ -+ -+static int get_dir_index_using_name(struct super_block *s, -+ long long *next_block, unsigned int *next_offset, -+ long long index_start, unsigned int index_offset, int i_count, -+ const char *name, int size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index *index; -+ char *str; -+ -+ TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count); -+ -+ str = kmalloc(sizeof(struct squashfs_dir_index) + -+ (SQUASHFS_NAME_LEN + 1) * 2, GFP_KERNEL); -+ if (str == NULL) { -+ ERROR("Failed to allocate squashfs_dir_index\n"); -+ goto failure; -+ } -+ -+ index = (struct squashfs_dir_index *) (str + SQUASHFS_NAME_LEN + 1); -+ strncpy(str, name, size); -+ str[size] = '\0'; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index sindex; -+ squashfs_get_cached_block(s, &sindex, index_start, index_offset, -+ sizeof(sindex), &index_start, &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX(index, &sindex); -+ } else -+ squashfs_get_cached_block(s, index, index_start, index_offset, -+ sizeof(struct squashfs_dir_index), &index_start, &index_offset); -+ -+ squashfs_get_cached_block(s, index->name, index_start, index_offset, -+ index->size + 1, &index_start, &index_offset); -+ -+ index->name[index->size + 1] = '\0'; -+ -+ if (strcmp(index->name, str) > 0) -+ break; -+ -+ length = index->index; -+ *next_block = index->start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ kfree(str); -+ -+failure: -+ return length + 3; -+} -+ -+ -+static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir) -+{ -+ struct inode *i = file->f_dentry->d_inode; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, dir_count; -+ struct squashfs_dir_header dirh; -+ struct squashfs_dir_entry *dire; -+ -+ TRACE("Entered squashfs_readdir [%llx:%x]\n", next_block, next_offset); -+ -+ dire = kmalloc(sizeof(struct squashfs_dir_entry) + -+ SQUASHFS_NAME_LEN + 1, GFP_KERNEL); -+ if (dire == NULL) { -+ ERROR("Failed to allocate squashfs_dir_entry\n"); -+ goto finish; -+ } -+ -+ while(file->f_pos < 3) { -+ char *name; -+ int size, i_ino; -+ -+ if(file->f_pos == 0) { -+ name = "."; -+ size = 1; -+ i_ino = i->i_ino; -+ } else { -+ name = ".."; -+ size = 2; -+ i_ino = SQUASHFS_I(i)->u.s2.parent_inode; -+ } -+ TRACE("Calling filldir(%x, %s, %d, %d, %d, %d)\n", -+ (unsigned int) dirent, name, size, (int) -+ file->f_pos, i_ino, squashfs_filetype_table[1]); -+ -+ if (filldir(dirent, name, size, file->f_pos, i_ino, -+ squashfs_filetype_table[1]) < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos += size; -+ } -+ -+ length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, file->f_pos); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header sdirh; -+ -+ if (!squashfs_get_cached_block(i->i_sb, &sdirh, next_block, -+ next_offset, sizeof(sdirh), &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, &dirh, next_block, -+ next_offset, sizeof(dirh), &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry sdire; -+ if (!squashfs_get_cached_block(i->i_sb, &sdire, next_block, -+ next_offset, sizeof(sdire), &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, dire, next_block, -+ next_offset, sizeof(*dire), &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, next_block, -+ next_offset, dire->size + 1, &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (file->f_pos >= length) -+ continue; -+ -+ dire->name[dire->size + 1] = '\0'; -+ -+ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d, %d)\n", -+ (unsigned int) dirent, dire->name, dire->size + 1, -+ (int) file->f_pos, dirh.start_block, dire->offset, -+ dirh.inode_number + dire->inode_number, -+ squashfs_filetype_table[dire->type]); -+ -+ if (filldir(dirent, dire->name, dire->size + 1, file->f_pos, -+ dirh.inode_number + dire->inode_number, -+ squashfs_filetype_table[dire->type]) < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos = length; -+ } -+ } -+ -+finish: -+ kfree(dire); -+ return 0; -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ kfree(dire); -+ return 0; -+} -+ -+ -+static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry, -+ struct nameidata *nd) -+{ -+ const unsigned char *name = dentry->d_name.name; -+ int len = dentry->d_name.len; -+ struct inode *inode = NULL; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, dir_count; -+ struct squashfs_dir_header dirh; -+ struct squashfs_dir_entry *dire; -+ -+ TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset); -+ -+ dire = kmalloc(sizeof(struct squashfs_dir_entry) + -+ SQUASHFS_NAME_LEN + 1, GFP_KERNEL); -+ if (dire == NULL) { -+ ERROR("Failed to allocate squashfs_dir_entry\n"); -+ goto exit_lookup; -+ } -+ -+ if (len > SQUASHFS_NAME_LEN) -+ goto exit_lookup; -+ -+ length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, name, len); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header sdirh; -+ if (!squashfs_get_cached_block(i->i_sb, &sdirh, next_block, -+ next_offset, sizeof(sdirh), &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, &dirh, next_block, -+ next_offset, sizeof(dirh), &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry sdire; -+ if (!squashfs_get_cached_block(i->i_sb, &sdire, next_block, -+ next_offset, sizeof(sdire), &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, dire, next_block, -+ next_offset, sizeof(*dire), &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, next_block, -+ next_offset, dire->size + 1, &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (name[0] < dire->name[0]) -+ goto exit_lookup; -+ -+ if ((len == dire->size + 1) && !strncmp(name, dire->name, len)) { -+ squashfs_inode_t ino = SQUASHFS_MKINODE(dirh.start_block, -+ dire->offset); -+ -+ TRACE("calling squashfs_iget for directory entry %s, inode" -+ " %x:%x, %d\n", name, dirh.start_block, dire->offset, -+ dirh.inode_number + dire->inode_number); -+ -+ inode = squashfs_iget(i->i_sb, ino, dirh.inode_number + dire->inode_number); -+ -+ goto exit_lookup; -+ } -+ } -+ } -+ -+exit_lookup: -+ kfree(dire); -+ if (inode) -+ return d_splice_alias(inode, dentry); -+ d_add(dentry, inode); -+ return ERR_PTR(0); -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ goto exit_lookup; -+} -+ -+ -+static int squashfs_remount(struct super_block *s, int *flags, char *data) -+{ -+ *flags |= MS_RDONLY; -+ return 0; -+} -+ -+ -+static void squashfs_put_super(struct super_block *s) -+{ -+ int i; -+ -+ if (s->s_fs_info) { -+ struct squashfs_sb_info *sbi = s->s_fs_info; -+ if (sbi->block_cache) -+ for (i = 0; i < squashfs_cached_blks; i++) -+ if (sbi->block_cache[i].block != SQUASHFS_INVALID_BLK) -+ vfree(sbi->block_cache[i].data); -+ if (sbi->fragment) -+ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) -+ vfree(sbi->fragment[i].data); -+ kfree(sbi->fragment); -+ kfree(sbi->block_cache); -+ vfree(sbi->read_page); -+ kfree(sbi->uid); -+ kfree(sbi->fragment_index); -+ kfree(sbi->fragment_index_2); -+ kfree(sbi->meta_index); -+ vfree(sbi->stream.workspace); -+ kfree(s->s_fs_info); -+ s->s_fs_info = NULL; -+ } -+} -+ -+ -+static int squashfs_get_sb(struct file_system_type *fs_type, int flags, -+ const char *dev_name, void *data, struct vfsmount *mnt) -+{ -+ return get_sb_bdev(fs_type, flags, dev_name, data, squashfs_fill_super, -+ mnt); -+} -+ -+ -+static int __init init_squashfs_fs(void) -+{ -+ int err = init_inodecache(); -+ if (err) -+ goto out; -+ -+ printk(KERN_INFO "squashfs: version 3.3 (2007/10/31) " -+ "Phillip Lougher\n"); -+ -+ err = register_filesystem(&squashfs_fs_type); -+ if (err) -+ destroy_inodecache(); -+ -+out: -+ return err; -+} -+ -+ -+static void __exit exit_squashfs_fs(void) -+{ -+ unregister_filesystem(&squashfs_fs_type); -+ destroy_inodecache(); -+} -+ -+ -+static struct kmem_cache * squashfs_inode_cachep; -+ -+ -+static struct inode *squashfs_alloc_inode(struct super_block *sb) -+{ -+ struct squashfs_inode_info *ei; -+ ei = kmem_cache_alloc(squashfs_inode_cachep, GFP_KERNEL); -+ return ei ? &ei->vfs_inode : NULL; -+} -+ -+ -+static void squashfs_destroy_inode(struct inode *inode) -+{ -+ kmem_cache_free(squashfs_inode_cachep, SQUASHFS_I(inode)); -+} -+ -+ -+static void init_once(struct kmem_cache *cachep, void *foo) -+{ -+ struct squashfs_inode_info *ei = foo; -+ -+ inode_init_once(&ei->vfs_inode); -+} -+ -+ -+static int __init init_inodecache(void) -+{ -+ squashfs_inode_cachep = kmem_cache_create("squashfs_inode_cache", -+ sizeof(struct squashfs_inode_info), 0, -+ SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT, init_once); -+ if (squashfs_inode_cachep == NULL) -+ return -ENOMEM; -+ return 0; -+} -+ -+ -+static void destroy_inodecache(void) -+{ -+ kmem_cache_destroy(squashfs_inode_cachep); -+} -+ -+ -+module_init(init_squashfs_fs); -+module_exit(exit_squashfs_fs); -+MODULE_DESCRIPTION("squashfs 3.2-r2-CVS, a compressed read-only filesystem"); -+MODULE_AUTHOR("Phillip Lougher "); -+MODULE_LICENSE("GPL"); -diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/Makefile linux-2.6.24-squashfs3.3/fs/squashfs/Makefile ---- linux-2.6.24/fs/squashfs/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.24-squashfs3.3/fs/squashfs/Makefile 2005-11-20 14:31:00.000000000 +0000 -@@ -0,0 +1,7 @@ -+# -+# Makefile for the linux squashfs routines. -+# -+ -+obj-$(CONFIG_SQUASHFS) += squashfs.o -+squashfs-y += inode.o -+squashfs-y += squashfs2_0.o -diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/squashfs2_0.c linux-2.6.24-squashfs3.3/fs/squashfs/squashfs2_0.c ---- linux-2.6.24/fs/squashfs/squashfs2_0.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.24-squashfs3.3/fs/squashfs/squashfs2_0.c 2007-10-25 00:43:59.000000000 +0100 -@@ -0,0 +1,740 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs2_0.c -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "squashfs.h" -+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir); -+static struct dentry *squashfs_lookup_2(struct inode *, struct dentry *, -+ struct nameidata *); -+ -+static struct file_operations squashfs_dir_ops_2 = { -+ .read = generic_read_dir, -+ .readdir = squashfs_readdir_2 -+}; -+ -+static struct inode_operations squashfs_dir_inode_ops_2 = { -+ .lookup = squashfs_lookup_2 -+}; -+ -+static unsigned char squashfs_filetype_table[] = { -+ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK -+}; -+ -+static int read_fragment_index_table_2(struct super_block *s) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ if (!(msblk->fragment_index_2 = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES_2 -+ (sblk->fragments), GFP_KERNEL))) { -+ ERROR("Failed to allocate uid/gid table\n"); -+ return 0; -+ } -+ -+ if (SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments) && -+ !squashfs_read_data(s, (char *) -+ msblk->fragment_index_2, -+ sblk->fragment_table_start, -+ SQUASHFS_FRAGMENT_INDEX_BYTES_2 -+ (sblk->fragments) | -+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments))) { -+ ERROR("unable to read fragment index table\n"); -+ return 0; -+ } -+ -+ if (msblk->swap) { -+ int i; -+ unsigned int fragment; -+ -+ for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES_2(sblk->fragments); -+ i++) { -+ SQUASHFS_SWAP_FRAGMENT_INDEXES_2((&fragment), -+ &msblk->fragment_index_2[i], 1); -+ msblk->fragment_index_2[i] = fragment; -+ } -+ } -+ -+ return 1; -+} -+ -+ -+static int get_fragment_location_2(struct super_block *s, unsigned int fragment, -+ long long *fragment_start_block, -+ unsigned int *fragment_size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ long long start_block = -+ msblk->fragment_index_2[SQUASHFS_FRAGMENT_INDEX_2(fragment)]; -+ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET_2(fragment); -+ struct squashfs_fragment_entry_2 fragment_entry; -+ -+ if (msblk->swap) { -+ struct squashfs_fragment_entry_2 sfragment_entry; -+ -+ if (!squashfs_get_cached_block(s, (char *) &sfragment_entry, -+ start_block, offset, -+ sizeof(sfragment_entry), &start_block, -+ &offset)) -+ goto out; -+ SQUASHFS_SWAP_FRAGMENT_ENTRY_2(&fragment_entry, &sfragment_entry); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) &fragment_entry, -+ start_block, offset, -+ sizeof(fragment_entry), &start_block, -+ &offset)) -+ goto out; -+ -+ *fragment_start_block = fragment_entry.start_block; -+ *fragment_size = fragment_entry.size; -+ -+ return 1; -+ -+out: -+ return 0; -+} -+ -+ -+static void squashfs_new_inode(struct squashfs_sb_info *msblk, struct inode *i, -+ struct squashfs_base_inode_header_2 *inodeb, unsigned int ino) -+{ -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ i->i_ino = ino; -+ i->i_mtime.tv_sec = sblk->mkfs_time; -+ i->i_atime.tv_sec = sblk->mkfs_time; -+ i->i_ctime.tv_sec = sblk->mkfs_time; -+ i->i_uid = msblk->uid[inodeb->uid]; -+ i->i_mode = inodeb->mode; -+ i->i_nlink = 1; -+ i->i_size = 0; -+ if (inodeb->guid == SQUASHFS_GUIDS) -+ i->i_gid = i->i_uid; -+ else -+ i->i_gid = msblk->guid[inodeb->guid]; -+} -+ -+ -+static int squashfs_read_inode_2(struct inode *i, squashfs_inode_t inode) -+{ -+ struct super_block *s = i->i_sb; -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ unsigned int block = SQUASHFS_INODE_BLK(inode) + -+ sblk->inode_table_start; -+ unsigned int offset = SQUASHFS_INODE_OFFSET(inode); -+ unsigned int ino = SQUASHFS_MK_VFS_INODE(block - -+ sblk->inode_table_start, offset); -+ long long next_block; -+ unsigned int next_offset; -+ union squashfs_inode_header_2 id, sid; -+ struct squashfs_base_inode_header_2 *inodeb = &id.base, -+ *sinodeb = &sid.base; -+ -+ TRACE("Entered squashfs_read_inode_2\n"); -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) sinodeb, block, -+ offset, sizeof(*sinodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_BASE_INODE_HEADER_2(inodeb, sinodeb, -+ sizeof(*sinodeb)); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) inodeb, block, -+ offset, sizeof(*inodeb), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ squashfs_new_inode(msblk, i, inodeb, ino); -+ -+ switch(inodeb->inode_type) { -+ case SQUASHFS_FILE_TYPE: { -+ struct squashfs_reg_inode_header_2 *inodep = &id.reg; -+ struct squashfs_reg_inode_header_2 *sinodep = &sid.reg; -+ long long frag_blk; -+ unsigned int frag_size = 0; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_REG_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ frag_blk = SQUASHFS_INVALID_BLK; -+ if (inodep->fragment != SQUASHFS_INVALID_FRAG && -+ !get_fragment_location_2(s, -+ inodep->fragment, &frag_blk, &frag_size)) -+ goto failed_read; -+ -+ i->i_size = inodep->file_size; -+ i->i_fop = &generic_ro_fops; -+ i->i_mode |= S_IFREG; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ i->i_blocks = ((i->i_size - 1) >> 9) + 1; -+ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; -+ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; -+ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->u.s1.block_list_start = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ i->i_data.a_ops = &squashfs_aops; -+ -+ TRACE("File inode %x:%x, start_block %x, " -+ "block_list_start %llx, offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, next_block, -+ next_offset); -+ break; -+ } -+ case SQUASHFS_DIR_TYPE: { -+ struct squashfs_dir_inode_header_2 *inodep = &id.dir; -+ struct squashfs_dir_inode_header_2 *sinodep = &sid.dir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DIR_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops_2; -+ i->i_fop = &squashfs_dir_ops_2; -+ i->i_mode |= S_IFDIR; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = 0; -+ SQUASHFS_I(i)->u.s2.parent_inode = 0; -+ -+ TRACE("Directory inode %x:%x, start_block %x, offset " -+ "%x\n", SQUASHFS_INODE_BLK(inode), -+ offset, inodep->start_block, -+ inodep->offset); -+ break; -+ } -+ case SQUASHFS_LDIR_TYPE: { -+ struct squashfs_ldir_inode_header_2 *inodep = &id.ldir; -+ struct squashfs_ldir_inode_header_2 *sinodep = &sid.ldir; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_LDIR_INODE_HEADER_2(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_size = inodep->file_size; -+ i->i_op = &squashfs_dir_inode_ops_2; -+ i->i_fop = &squashfs_dir_ops_2; -+ i->i_mode |= S_IFDIR; -+ i->i_mtime.tv_sec = inodep->mtime; -+ i->i_atime.tv_sec = inodep->mtime; -+ i->i_ctime.tv_sec = inodep->mtime; -+ SQUASHFS_I(i)->start_block = inodep->start_block; -+ SQUASHFS_I(i)->offset = inodep->offset; -+ SQUASHFS_I(i)->u.s2.directory_index_start = next_block; -+ SQUASHFS_I(i)->u.s2.directory_index_offset = -+ next_offset; -+ SQUASHFS_I(i)->u.s2.directory_index_count = -+ inodep->i_count; -+ SQUASHFS_I(i)->u.s2.parent_inode = 0; -+ -+ TRACE("Long directory inode %x:%x, start_block %x, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->start_block, inodep->offset); -+ break; -+ } -+ case SQUASHFS_SYMLINK_TYPE: { -+ struct squashfs_symlink_inode_header_2 *inodep = -+ &id.symlink; -+ struct squashfs_symlink_inode_header_2 *sinodep = -+ &sid.symlink; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(inodep, -+ sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_size = inodep->symlink_size; -+ i->i_op = &page_symlink_inode_operations; -+ i->i_data.a_ops = &squashfs_symlink_aops; -+ i->i_mode |= S_IFLNK; -+ SQUASHFS_I(i)->start_block = next_block; -+ SQUASHFS_I(i)->offset = next_offset; -+ -+ TRACE("Symbolic link inode %x:%x, start_block %llx, " -+ "offset %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ next_block, next_offset); -+ break; -+ } -+ case SQUASHFS_BLKDEV_TYPE: -+ case SQUASHFS_CHRDEV_TYPE: { -+ struct squashfs_dev_inode_header_2 *inodep = &id.dev; -+ struct squashfs_dev_inode_header_2 *sinodep = &sid.dev; -+ -+ if (msblk->swap) { -+ if (!squashfs_get_cached_block(s, (char *) -+ sinodep, block, offset, -+ sizeof(*sinodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ SQUASHFS_SWAP_DEV_INODE_HEADER_2(inodep, sinodep); -+ } else -+ if (!squashfs_get_cached_block(s, (char *) -+ inodep, block, offset, -+ sizeof(*inodep), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ i->i_mode |= (inodeb->inode_type == -+ SQUASHFS_CHRDEV_TYPE) ? S_IFCHR : -+ S_IFBLK; -+ init_special_inode(i, i->i_mode, -+ old_decode_dev(inodep->rdev)); -+ -+ TRACE("Device inode %x:%x, rdev %x\n", -+ SQUASHFS_INODE_BLK(inode), offset, -+ inodep->rdev); -+ break; -+ } -+ case SQUASHFS_FIFO_TYPE: -+ case SQUASHFS_SOCKET_TYPE: { -+ -+ i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE) -+ ? S_IFIFO : S_IFSOCK; -+ init_special_inode(i, i->i_mode, 0); -+ break; -+ } -+ default: -+ ERROR("Unknown inode type %d in squashfs_iget!\n", -+ inodeb->inode_type); -+ goto failed_read1; -+ } -+ -+ return 1; -+ -+failed_read: -+ ERROR("Unable to read inode [%x:%x]\n", block, offset); -+ -+failed_read1: -+ return 0; -+} -+ -+ -+static int get_dir_index_using_offset(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ long long f_pos) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index_2 index; -+ -+ TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n", -+ i_count, (unsigned int) f_pos); -+ -+ if (f_pos == 0) -+ goto finish; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index_2 sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX_2(&index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) &index, -+ index_start, index_offset, -+ sizeof(index), &index_start, -+ &index_offset); -+ -+ if (index.index > f_pos) -+ break; -+ -+ squashfs_get_cached_block(s, NULL, index_start, index_offset, -+ index.size + 1, &index_start, -+ &index_offset); -+ -+ length = index.index; -+ *next_block = index.start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ -+finish: -+ return length; -+} -+ -+ -+static int get_dir_index_using_name(struct super_block *s, long long -+ *next_block, unsigned int *next_offset, -+ long long index_start, -+ unsigned int index_offset, int i_count, -+ const char *name, int size) -+{ -+ struct squashfs_sb_info *msblk = s->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ int i, length = 0; -+ struct squashfs_dir_index_2 *index; -+ char *str; -+ -+ TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count); -+ -+ if (!(str = kmalloc(sizeof(struct squashfs_dir_index) + -+ (SQUASHFS_NAME_LEN + 1) * 2, GFP_KERNEL))) { -+ ERROR("Failed to allocate squashfs_dir_index\n"); -+ goto failure; -+ } -+ -+ index = (struct squashfs_dir_index_2 *) (str + SQUASHFS_NAME_LEN + 1); -+ strncpy(str, name, size); -+ str[size] = '\0'; -+ -+ for (i = 0; i < i_count; i++) { -+ if (msblk->swap) { -+ struct squashfs_dir_index_2 sindex; -+ squashfs_get_cached_block(s, (char *) &sindex, -+ index_start, index_offset, -+ sizeof(sindex), &index_start, -+ &index_offset); -+ SQUASHFS_SWAP_DIR_INDEX_2(index, &sindex); -+ } else -+ squashfs_get_cached_block(s, (char *) index, -+ index_start, index_offset, -+ sizeof(struct squashfs_dir_index_2), -+ &index_start, &index_offset); -+ -+ squashfs_get_cached_block(s, index->name, index_start, -+ index_offset, index->size + 1, -+ &index_start, &index_offset); -+ -+ index->name[index->size + 1] = '\0'; -+ -+ if (strcmp(index->name, str) > 0) -+ break; -+ -+ length = index->index; -+ *next_block = index->start_block + sblk->directory_table_start; -+ } -+ -+ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; -+ kfree(str); -+failure: -+ return length; -+} -+ -+ -+static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir) -+{ -+ struct inode *i = file->f_dentry->d_inode; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, -+ dir_count; -+ struct squashfs_dir_header_2 dirh; -+ struct squashfs_dir_entry_2 *dire; -+ -+ TRACE("Entered squashfs_readdir_2 [%llx:%x]\n", next_block, next_offset); -+ -+ if (!(dire = kmalloc(sizeof(struct squashfs_dir_entry) + -+ SQUASHFS_NAME_LEN + 1, GFP_KERNEL))) { -+ ERROR("Failed to allocate squashfs_dir_entry\n"); -+ goto finish; -+ } -+ -+ length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, -+ file->f_pos); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header_2 sdirh; -+ -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry_2 sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block, next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block, next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, -+ dire->size + 1, &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (file->f_pos >= length) -+ continue; -+ -+ dire->name[dire->size + 1] = '\0'; -+ -+ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n", -+ (unsigned int) dirent, dire->name, -+ dire->size + 1, (int) file->f_pos, -+ dirh.start_block, dire->offset, -+ squashfs_filetype_table[dire->type]); -+ -+ if (filldir(dirent, dire->name, dire->size + 1, -+ file->f_pos, SQUASHFS_MK_VFS_INODE( -+ dirh.start_block, dire->offset), -+ squashfs_filetype_table[dire->type]) -+ < 0) { -+ TRACE("Filldir returned less than 0\n"); -+ goto finish; -+ } -+ file->f_pos = length; -+ } -+ } -+ -+finish: -+ kfree(dire); -+ return 0; -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ kfree(dire); -+ return 0; -+} -+ -+ -+static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry, -+ struct nameidata *nd) -+{ -+ const unsigned char *name = dentry->d_name.name; -+ int len = dentry->d_name.len; -+ struct inode *inode = NULL; -+ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ long long next_block = SQUASHFS_I(i)->start_block + -+ sblk->directory_table_start; -+ int next_offset = SQUASHFS_I(i)->offset, length = 0, -+ dir_count; -+ struct squashfs_dir_header_2 dirh; -+ struct squashfs_dir_entry_2 *dire; -+ int sorted = sblk->s_major == 2 && sblk->s_minor >= 1; -+ -+ TRACE("Entered squashfs_lookup_2 [%llx:%x]\n", next_block, next_offset); -+ -+ if (!(dire = kmalloc(sizeof(struct squashfs_dir_entry) + -+ SQUASHFS_NAME_LEN + 1, GFP_KERNEL))) { -+ ERROR("Failed to allocate squashfs_dir_entry\n"); -+ goto exit_loop; -+ } -+ -+ if (len > SQUASHFS_NAME_LEN) -+ goto exit_loop; -+ -+ length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_start, -+ SQUASHFS_I(i)->u.s2.directory_index_offset, -+ SQUASHFS_I(i)->u.s2.directory_index_count, name, -+ len); -+ -+ while (length < i_size_read(i)) { -+ /* read directory header */ -+ if (msblk->swap) { -+ struct squashfs_dir_header_2 sdirh; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, -+ next_block, next_offset, sizeof(sdirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdirh); -+ SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, -+ next_block, next_offset, sizeof(dirh), -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(dirh); -+ } -+ -+ dir_count = dirh.count + 1; -+ while (dir_count--) { -+ if (msblk->swap) { -+ struct squashfs_dir_entry_2 sdire; -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ &sdire, next_block,next_offset, -+ sizeof(sdire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(sdire); -+ SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire); -+ } else { -+ if (!squashfs_get_cached_block(i->i_sb, (char *) -+ dire, next_block,next_offset, -+ sizeof(*dire), &next_block, -+ &next_offset)) -+ goto failed_read; -+ -+ length += sizeof(*dire); -+ } -+ -+ if (!squashfs_get_cached_block(i->i_sb, dire->name, -+ next_block, next_offset, dire->size + 1, -+ &next_block, &next_offset)) -+ goto failed_read; -+ -+ length += dire->size + 1; -+ -+ if (sorted && name[0] < dire->name[0]) -+ goto exit_loop; -+ -+ if ((len == dire->size + 1) && !strncmp(name, -+ dire->name, len)) { -+ squashfs_inode_t ino = -+ SQUASHFS_MKINODE(dirh.start_block, -+ dire->offset); -+ unsigned int inode_number = SQUASHFS_MK_VFS_INODE(dirh.start_block, -+ dire->offset); -+ -+ TRACE("calling squashfs_iget for directory " -+ "entry %s, inode %x:%x, %lld\n", name, -+ dirh.start_block, dire->offset, ino); -+ -+ inode = squashfs_iget(i->i_sb, ino, inode_number); -+ -+ goto exit_loop; -+ } -+ } -+ } -+ -+exit_loop: -+ kfree(dire); -+ d_add(dentry, inode); -+ return ERR_PTR(0); -+ -+failed_read: -+ ERROR("Unable to read directory block [%llx:%x]\n", next_block, -+ next_offset); -+ goto exit_loop; -+} -+ -+ -+int squashfs_2_0_supported(struct squashfs_sb_info *msblk) -+{ -+ struct squashfs_super_block *sblk = &msblk->sblk; -+ -+ msblk->read_inode = squashfs_read_inode_2; -+ msblk->read_fragment_index_table = read_fragment_index_table_2; -+ -+ sblk->bytes_used = sblk->bytes_used_2; -+ sblk->uid_start = sblk->uid_start_2; -+ sblk->guid_start = sblk->guid_start_2; -+ sblk->inode_table_start = sblk->inode_table_start_2; -+ sblk->directory_table_start = sblk->directory_table_start_2; -+ sblk->fragment_table_start = sblk->fragment_table_start_2; -+ -+ return 1; -+} -diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/squashfs.h linux-2.6.24-squashfs3.3/fs/squashfs/squashfs.h ---- linux-2.6.24/fs/squashfs/squashfs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.24-squashfs3.3/fs/squashfs/squashfs.h 2007-08-19 04:23:16.000000000 +0100 -@@ -0,0 +1,86 @@ -+/* -+ * Squashfs - a compressed read only filesystem for Linux -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs.h -+ */ -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+#undef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+#endif -+ -+#ifdef SQUASHFS_TRACE -+#define TRACE(s, args...) printk(KERN_NOTICE "SQUASHFS: "s, ## args) -+#else -+#define TRACE(s, args...) {} -+#endif -+ -+#define ERROR(s, args...) printk(KERN_ERR "SQUASHFS error: "s, ## args) -+ -+#define SERROR(s, args...) do { \ -+ if (!silent) \ -+ printk(KERN_ERR "SQUASHFS error: "s, ## args);\ -+ } while(0) -+ -+#define WARNING(s, args...) printk(KERN_WARNING "SQUASHFS: "s, ## args) -+ -+static inline struct squashfs_inode_info *SQUASHFS_I(struct inode *inode) -+{ -+ return list_entry(inode, struct squashfs_inode_info, vfs_inode); -+} -+ -+#if defined(CONFIG_SQUASHFS_1_0_COMPATIBILITY ) || defined(CONFIG_SQUASHFS_2_0_COMPATIBILITY) -+#define SQSH_EXTERN -+extern unsigned int squashfs_read_data(struct super_block *s, char *buffer, -+ long long index, unsigned int length, -+ long long *next_index, int srclength); -+extern int squashfs_get_cached_block(struct super_block *s, void *buffer, -+ long long block, unsigned int offset, -+ int length, long long *next_block, -+ unsigned int *next_offset); -+extern void release_cached_fragment(struct squashfs_sb_info *msblk, struct -+ squashfs_fragment_cache *fragment); -+extern struct squashfs_fragment_cache *get_cached_fragment(struct super_block -+ *s, long long start_block, -+ int length); -+extern struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode, unsigned int inode_number); -+extern const struct address_space_operations squashfs_symlink_aops; -+extern const struct address_space_operations squashfs_aops; -+extern struct inode_operations squashfs_dir_inode_ops; -+#else -+#define SQSH_EXTERN static -+#endif -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+extern int squashfs_1_0_supported(struct squashfs_sb_info *msblk); -+#else -+static inline int squashfs_1_0_supported(struct squashfs_sb_info *msblk) -+{ -+ return 0; -+} -+#endif -+ -+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+extern int squashfs_2_0_supported(struct squashfs_sb_info *msblk); -+#else -+static inline int squashfs_2_0_supported(struct squashfs_sb_info *msblk) -+{ -+ return 0; -+} -+#endif -diff -x .gitignore -Nurp linux-2.6.24/include/linux/squashfs_fs.h linux-2.6.24-squashfs3.3/include/linux/squashfs_fs.h ---- linux-2.6.24/include/linux/squashfs_fs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.24-squashfs3.3/include/linux/squashfs_fs.h 2007-11-01 03:50:57.000000000 +0000 -@@ -0,0 +1,935 @@ -+#ifndef SQUASHFS_FS -+#define SQUASHFS_FS -+ -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs.h -+ */ -+ -+#ifndef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+#define CONFIG_SQUASHFS_2_0_COMPATIBILITY -+#endif -+ -+#define SQUASHFS_CACHED_FRAGMENTS CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE -+#define SQUASHFS_MAJOR 3 -+#define SQUASHFS_MINOR 1 -+#define SQUASHFS_MAGIC 0x73717368 -+#define SQUASHFS_MAGIC_SWAP 0x68737173 -+#define SQUASHFS_START 0 -+ -+/* size of metadata (inode and directory) blocks */ -+#define SQUASHFS_METADATA_SIZE 8192 -+#define SQUASHFS_METADATA_LOG 13 -+ -+/* default size of data blocks */ -+#define SQUASHFS_FILE_SIZE 131072 -+#define SQUASHFS_FILE_LOG 17 -+ -+#define SQUASHFS_FILE_MAX_SIZE 1048576 -+ -+/* Max number of uids and gids */ -+#define SQUASHFS_UIDS 256 -+#define SQUASHFS_GUIDS 255 -+ -+/* Max length of filename (not 255) */ -+#define SQUASHFS_NAME_LEN 256 -+ -+#define SQUASHFS_INVALID ((long long) 0xffffffffffff) -+#define SQUASHFS_INVALID_FRAG ((unsigned int) 0xffffffff) -+#define SQUASHFS_INVALID_BLK ((long long) -1) -+#define SQUASHFS_USED_BLK ((long long) -2) -+ -+/* Filesystem flags */ -+#define SQUASHFS_NOI 0 -+#define SQUASHFS_NOD 1 -+#define SQUASHFS_CHECK 2 -+#define SQUASHFS_NOF 3 -+#define SQUASHFS_NO_FRAG 4 -+#define SQUASHFS_ALWAYS_FRAG 5 -+#define SQUASHFS_DUPLICATE 6 -+#define SQUASHFS_EXPORT 7 -+ -+#define SQUASHFS_BIT(flag, bit) ((flag >> bit) & 1) -+ -+#define SQUASHFS_UNCOMPRESSED_INODES(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOI) -+ -+#define SQUASHFS_UNCOMPRESSED_DATA(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOD) -+ -+#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NOF) -+ -+#define SQUASHFS_NO_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_NO_FRAG) -+ -+#define SQUASHFS_ALWAYS_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_ALWAYS_FRAG) -+ -+#define SQUASHFS_DUPLICATES(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_DUPLICATE) -+ -+#define SQUASHFS_EXPORTABLE(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_EXPORT) -+ -+#define SQUASHFS_CHECK_DATA(flags) SQUASHFS_BIT(flags, \ -+ SQUASHFS_CHECK) -+ -+#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, \ -+ duplicate_checking, exortable) (noi | (nod << 1) | (check_data << 2) \ -+ | (nof << 3) | (no_frag << 4) | (always_frag << 5) | \ -+ (duplicate_checking << 6) | (exportable << 7)) -+ -+/* Max number of types and file types */ -+#define SQUASHFS_DIR_TYPE 1 -+#define SQUASHFS_FILE_TYPE 2 -+#define SQUASHFS_SYMLINK_TYPE 3 -+#define SQUASHFS_BLKDEV_TYPE 4 -+#define SQUASHFS_CHRDEV_TYPE 5 -+#define SQUASHFS_FIFO_TYPE 6 -+#define SQUASHFS_SOCKET_TYPE 7 -+#define SQUASHFS_LDIR_TYPE 8 -+#define SQUASHFS_LREG_TYPE 9 -+ -+/* 1.0 filesystem type definitions */ -+#define SQUASHFS_TYPES 5 -+#define SQUASHFS_IPC_TYPE 0 -+ -+/* Flag whether block is compressed or uncompressed, bit is set if block is -+ * uncompressed */ -+#define SQUASHFS_COMPRESSED_BIT (1 << 15) -+ -+#define SQUASHFS_COMPRESSED_SIZE(B) (((B) & ~SQUASHFS_COMPRESSED_BIT) ? \ -+ (B) & ~SQUASHFS_COMPRESSED_BIT : SQUASHFS_COMPRESSED_BIT) -+ -+#define SQUASHFS_COMPRESSED(B) (!((B) & SQUASHFS_COMPRESSED_BIT)) -+ -+#define SQUASHFS_COMPRESSED_BIT_BLOCK (1 << 24) -+ -+#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B) ((B) & \ -+ ~SQUASHFS_COMPRESSED_BIT_BLOCK) -+ -+#define SQUASHFS_COMPRESSED_BLOCK(B) (!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK)) -+ -+/* -+ * Inode number ops. Inodes consist of a compressed block number, and an -+ * uncompressed offset within that block -+ */ -+#define SQUASHFS_INODE_BLK(a) ((unsigned int) ((a) >> 16)) -+ -+#define SQUASHFS_INODE_OFFSET(a) ((unsigned int) ((a) & 0xffff)) -+ -+#define SQUASHFS_MKINODE(A, B) ((squashfs_inode_t)(((squashfs_inode_t) (A)\ -+ << 16) + (B))) -+ -+/* Compute 32 bit VFS inode number from squashfs inode number */ -+#define SQUASHFS_MK_VFS_INODE(a, b) ((unsigned int) (((a) << 8) + \ -+ ((b) >> 2) + 1)) -+/* XXX */ -+ -+/* Translate between VFS mode and squashfs mode */ -+#define SQUASHFS_MODE(a) ((a) & 0xfff) -+ -+/* fragment and fragment table defines */ -+#define SQUASHFS_FRAGMENT_BYTES(A) ((A) * sizeof(struct squashfs_fragment_entry)) -+ -+#define SQUASHFS_FRAGMENT_INDEX(A) (SQUASHFS_FRAGMENT_BYTES(A) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A) (SQUASHFS_FRAGMENT_BYTES(A) % \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEXES(A) ((SQUASHFS_FRAGMENT_BYTES(A) + \ -+ SQUASHFS_METADATA_SIZE - 1) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_BYTES(A) (SQUASHFS_FRAGMENT_INDEXES(A) *\ -+ sizeof(long long)) -+ -+/* inode lookup table defines */ -+#define SQUASHFS_LOOKUP_BYTES(A) ((A) * sizeof(squashfs_inode_t)) -+ -+#define SQUASHFS_LOOKUP_BLOCK(A) (SQUASHFS_LOOKUP_BYTES(A) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_LOOKUP_BLOCK_OFFSET(A) (SQUASHFS_LOOKUP_BYTES(A) % \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_LOOKUP_BLOCKS(A) ((SQUASHFS_LOOKUP_BYTES(A) + \ -+ SQUASHFS_METADATA_SIZE - 1) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_LOOKUP_BLOCK_BYTES(A) (SQUASHFS_LOOKUP_BLOCKS(A) *\ -+ sizeof(long long)) -+ -+/* cached data constants for filesystem */ -+#define SQUASHFS_CACHED_BLKS 8 -+ -+#define SQUASHFS_MAX_FILE_SIZE_LOG 64 -+ -+#define SQUASHFS_MAX_FILE_SIZE ((long long) 1 << \ -+ (SQUASHFS_MAX_FILE_SIZE_LOG - 2)) -+ -+#define SQUASHFS_MARKER_BYTE 0xff -+ -+/* meta index cache */ -+#define SQUASHFS_META_INDEXES (SQUASHFS_METADATA_SIZE / sizeof(unsigned int)) -+#define SQUASHFS_META_ENTRIES 31 -+#define SQUASHFS_META_NUMBER 8 -+#define SQUASHFS_SLOTS 4 -+ -+struct meta_entry { -+ long long data_block; -+ unsigned int index_block; -+ unsigned short offset; -+ unsigned short pad; -+}; -+ -+struct meta_index { -+ unsigned int inode_number; -+ unsigned int offset; -+ unsigned short entries; -+ unsigned short skip; -+ unsigned short locked; -+ unsigned short pad; -+ struct meta_entry meta_entry[SQUASHFS_META_ENTRIES]; -+}; -+ -+ -+/* -+ * definitions for structures on disk -+ */ -+ -+typedef long long squashfs_block_t; -+typedef long long squashfs_inode_t; -+ -+struct squashfs_super_block { -+ unsigned int s_magic; -+ unsigned int inodes; -+ unsigned int bytes_used_2; -+ unsigned int uid_start_2; -+ unsigned int guid_start_2; -+ unsigned int inode_table_start_2; -+ unsigned int directory_table_start_2; -+ unsigned int s_major:16; -+ unsigned int s_minor:16; -+ unsigned int block_size_1:16; -+ unsigned int block_log:16; -+ unsigned int flags:8; -+ unsigned int no_uids:8; -+ unsigned int no_guids:8; -+ unsigned int mkfs_time /* time of filesystem creation */; -+ squashfs_inode_t root_inode; -+ unsigned int block_size; -+ unsigned int fragments; -+ unsigned int fragment_table_start_2; -+ long long bytes_used; -+ long long uid_start; -+ long long guid_start; -+ long long inode_table_start; -+ long long directory_table_start; -+ long long fragment_table_start; -+ long long lookup_table_start; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_index { -+ unsigned int index; -+ unsigned int start_block; -+ unsigned char size; -+ unsigned char name[0]; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_BASE_INODE_HEADER \ -+ unsigned int inode_type:4; \ -+ unsigned int mode:12; \ -+ unsigned int uid:8; \ -+ unsigned int guid:8; \ -+ unsigned int mtime; \ -+ unsigned int inode_number; -+ -+struct squashfs_base_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ squashfs_block_t start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ unsigned int file_size; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_lreg_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ squashfs_block_t start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ long long file_size; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int start_block; -+ unsigned int parent_inode; -+} __attribute__ ((packed)); -+ -+struct squashfs_ldir_inode_header { -+ SQUASHFS_BASE_INODE_HEADER; -+ unsigned int nlink; -+ unsigned int file_size:27; -+ unsigned int offset:13; -+ unsigned int start_block; -+ unsigned int i_count:16; -+ unsigned int parent_inode; -+ struct squashfs_dir_index index[0]; -+} __attribute__ ((packed)); -+ -+union squashfs_inode_header { -+ struct squashfs_base_inode_header base; -+ struct squashfs_dev_inode_header dev; -+ struct squashfs_symlink_inode_header symlink; -+ struct squashfs_reg_inode_header reg; -+ struct squashfs_lreg_inode_header lreg; -+ struct squashfs_dir_inode_header dir; -+ struct squashfs_ldir_inode_header ldir; -+ struct squashfs_ipc_inode_header ipc; -+}; -+ -+struct squashfs_dir_entry { -+ unsigned int offset:13; -+ unsigned int type:3; -+ unsigned int size:8; -+ int inode_number:16; -+ char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_header { -+ unsigned int count:8; -+ unsigned int start_block; -+ unsigned int inode_number; -+} __attribute__ ((packed)); -+ -+struct squashfs_fragment_entry { -+ long long start_block; -+ unsigned int size; -+ unsigned int pending; -+} __attribute__ ((packed)); -+ -+extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen); -+extern int squashfs_uncompress_init(void); -+extern int squashfs_uncompress_exit(void); -+ -+/* -+ * macros to convert each packed bitfield structure from little endian to big -+ * endian and vice versa. These are needed when creating or using a filesystem -+ * on a machine with different byte ordering to the target architecture. -+ * -+ */ -+ -+#define SQUASHFS_SWAP_START \ -+ int bits;\ -+ int b_pos;\ -+ unsigned long long val;\ -+ unsigned char *s;\ -+ unsigned char *d; -+ -+#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_super_block));\ -+ SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->inodes, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->bytes_used_2, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->uid_start_2, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->guid_start_2, d, 128, 32);\ -+ SQUASHFS_SWAP((s)->inode_table_start_2, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->directory_table_start_2, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->s_major, d, 224, 16);\ -+ SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\ -+ SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\ -+ SQUASHFS_SWAP((s)->block_log, d, 272, 16);\ -+ SQUASHFS_SWAP((s)->flags, d, 288, 8);\ -+ SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\ -+ SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\ -+ SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\ -+ SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\ -+ SQUASHFS_SWAP((s)->block_size, d, 408, 32);\ -+ SQUASHFS_SWAP((s)->fragments, d, 440, 32);\ -+ SQUASHFS_SWAP((s)->fragment_table_start_2, d, 472, 32);\ -+ SQUASHFS_SWAP((s)->bytes_used, d, 504, 64);\ -+ SQUASHFS_SWAP((s)->uid_start, d, 568, 64);\ -+ SQUASHFS_SWAP((s)->guid_start, d, 632, 64);\ -+ SQUASHFS_SWAP((s)->inode_table_start, d, 696, 64);\ -+ SQUASHFS_SWAP((s)->directory_table_start, d, 760, 64);\ -+ SQUASHFS_SWAP((s)->fragment_table_start, d, 824, 64);\ -+ SQUASHFS_SWAP((s)->lookup_table_start, d, 888, 64);\ -+} -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->guid, d, 24, 8);\ -+ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 64, 32); -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_ipc_inode_header))\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_dev_inode_header)); \ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->rdev, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_reg_inode_header));\ -+ SQUASHFS_SWAP((s)->start_block, d, 96, 64);\ -+ SQUASHFS_SWAP((s)->fragment, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 224, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LREG_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_lreg_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 128, 64);\ -+ SQUASHFS_SWAP((s)->fragment, d, 192, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 224, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 256, 64);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_dir_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 128, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 147, 13);\ -+ SQUASHFS_SWAP((s)->start_block, d, 160, 32);\ -+ SQUASHFS_SWAP((s)->parent_inode, d, 192, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LDIR_INODE_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ -+ sizeof(struct squashfs_ldir_inode_header));\ -+ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 128, 27);\ -+ SQUASHFS_SWAP((s)->offset, d, 155, 13);\ -+ SQUASHFS_SWAP((s)->start_block, d, 168, 32);\ -+ SQUASHFS_SWAP((s)->i_count, d, 200, 16);\ -+ SQUASHFS_SWAP((s)->parent_inode, d, 216, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INDEX(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index));\ -+ SQUASHFS_SWAP((s)->index, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->size, d, 64, 8);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header));\ -+ SQUASHFS_SWAP((s)->count, d, 0, 8);\ -+ SQUASHFS_SWAP((s)->start_block, d, 8, 32);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 40, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry));\ -+ SQUASHFS_SWAP((s)->offset, d, 0, 13);\ -+ SQUASHFS_SWAP((s)->type, d, 13, 3);\ -+ SQUASHFS_SWAP((s)->size, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->inode_number, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry));\ -+ SQUASHFS_SWAP((s)->start_block, d, 0, 64);\ -+ SQUASHFS_SWAP((s)->size, d, 64, 32);\ -+} -+ -+#define SQUASHFS_SWAP_INODE_T(s, d) SQUASHFS_SWAP_LONG_LONGS(s, d, 1) -+ -+#define SQUASHFS_SWAP_SHORTS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 2);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 16)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 16);\ -+} -+ -+#define SQUASHFS_SWAP_INTS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 4);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 32)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 32);\ -+} -+ -+#define SQUASHFS_SWAP_LONG_LONGS(s, d, n) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * 8);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ 64)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, 64);\ -+} -+ -+#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\ -+ int entry;\ -+ int bit_position;\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, n * bits / 8);\ -+ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ -+ bits)\ -+ SQUASHFS_SWAP(s[entry], d, bit_position, bits);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n) -+#define SQUASHFS_SWAP_LOOKUP_BLOCKS(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n) -+ -+#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY -+ -+struct squashfs_base_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int type:4; -+ unsigned int offset:4; -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int mtime; -+ unsigned int start_block; -+ unsigned int file_size:32; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header_1 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:4; /* index into uid table */ -+ unsigned int guid:4; /* index into guid table */ -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+union squashfs_inode_header_1 { -+ struct squashfs_base_inode_header_1 base; -+ struct squashfs_dev_inode_header_1 dev; -+ struct squashfs_symlink_inode_header_1 symlink; -+ struct squashfs_reg_inode_header_1 reg; -+ struct squashfs_dir_inode_header_1 dir; -+ struct squashfs_ipc_inode_header_1 ipc; -+}; -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n) \ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 4);\ -+ SQUASHFS_SWAP((s)->guid, d, 20, 4); -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_ipc_inode_header_1));\ -+ SQUASHFS_SWAP((s)->type, d, 24, 4);\ -+ SQUASHFS_SWAP((s)->offset, d, 28, 4);\ -+} -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_dev_inode_header_1));\ -+ SQUASHFS_SWAP((s)->rdev, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header_1));\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_reg_inode_header_1));\ -+ SQUASHFS_SWAP((s)->mtime, d, 24, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 56, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 88, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ -+ sizeof(struct squashfs_dir_inode_header_1));\ -+ SQUASHFS_SWAP((s)->file_size, d, 24, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 43, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 56, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 88, 24);\ -+} -+ -+#endif -+ -+#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY -+ -+struct squashfs_dir_index_2 { -+ unsigned int index:27; -+ unsigned int start_block:29; -+ unsigned char size; -+ unsigned char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_base_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_ipc_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+} __attribute__ ((packed)); -+ -+struct squashfs_dev_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned short rdev; -+} __attribute__ ((packed)); -+ -+struct squashfs_symlink_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned short symlink_size; -+ char symlink[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_reg_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int mtime; -+ unsigned int start_block; -+ unsigned int fragment; -+ unsigned int offset; -+ unsigned int file_size:32; -+ unsigned short block_list[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int file_size:19; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+struct squashfs_ldir_inode_header_2 { -+ unsigned int inode_type:4; -+ unsigned int mode:12; /* protection */ -+ unsigned int uid:8; /* index into uid table */ -+ unsigned int guid:8; /* index into guid table */ -+ unsigned int file_size:27; -+ unsigned int offset:13; -+ unsigned int mtime; -+ unsigned int start_block:24; -+ unsigned int i_count:16; -+ struct squashfs_dir_index_2 index[0]; -+} __attribute__ ((packed)); -+ -+union squashfs_inode_header_2 { -+ struct squashfs_base_inode_header_2 base; -+ struct squashfs_dev_inode_header_2 dev; -+ struct squashfs_symlink_inode_header_2 symlink; -+ struct squashfs_reg_inode_header_2 reg; -+ struct squashfs_dir_inode_header_2 dir; -+ struct squashfs_ldir_inode_header_2 ldir; -+ struct squashfs_ipc_inode_header_2 ipc; -+}; -+ -+struct squashfs_dir_header_2 { -+ unsigned int count:8; -+ unsigned int start_block:24; -+} __attribute__ ((packed)); -+ -+struct squashfs_dir_entry_2 { -+ unsigned int offset:13; -+ unsigned int type:3; -+ unsigned int size:8; -+ char name[0]; -+} __attribute__ ((packed)); -+ -+struct squashfs_fragment_entry_2 { -+ unsigned int start_block; -+ unsigned int size; -+} __attribute__ ((packed)); -+ -+#define SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\ -+ SQUASHFS_MEMSET(s, d, n);\ -+ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ -+ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ -+ SQUASHFS_SWAP((s)->uid, d, 16, 8);\ -+ SQUASHFS_SWAP((s)->guid, d, 24, 8);\ -+ -+#define SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, n) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\ -+} -+ -+#define SQUASHFS_SWAP_IPC_INODE_HEADER_2(s, d) \ -+ SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, sizeof(struct squashfs_ipc_inode_header_2)) -+ -+#define SQUASHFS_SWAP_DEV_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_dev_inode_header_2)); \ -+ SQUASHFS_SWAP((s)->rdev, d, 32, 16);\ -+} -+ -+#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_symlink_inode_header_2));\ -+ SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\ -+} -+ -+#define SQUASHFS_SWAP_REG_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_reg_inode_header_2));\ -+ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->fragment, d, 96, 32);\ -+ SQUASHFS_SWAP((s)->offset, d, 128, 32);\ -+ SQUASHFS_SWAP((s)->file_size, d, 160, 32);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_dir_inode_header_2));\ -+ SQUASHFS_SWAP((s)->file_size, d, 32, 19);\ -+ SQUASHFS_SWAP((s)->offset, d, 51, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 64, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 96, 24);\ -+} -+ -+#define SQUASHFS_SWAP_LDIR_INODE_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ -+ sizeof(struct squashfs_ldir_inode_header_2));\ -+ SQUASHFS_SWAP((s)->file_size, d, 32, 27);\ -+ SQUASHFS_SWAP((s)->offset, d, 59, 13);\ -+ SQUASHFS_SWAP((s)->mtime, d, 72, 32);\ -+ SQUASHFS_SWAP((s)->start_block, d, 104, 24);\ -+ SQUASHFS_SWAP((s)->i_count, d, 128, 16);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_INDEX_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index_2));\ -+ SQUASHFS_SWAP((s)->index, d, 0, 27);\ -+ SQUASHFS_SWAP((s)->start_block, d, 27, 29);\ -+ SQUASHFS_SWAP((s)->size, d, 56, 8);\ -+} -+#define SQUASHFS_SWAP_DIR_HEADER_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header_2));\ -+ SQUASHFS_SWAP((s)->count, d, 0, 8);\ -+ SQUASHFS_SWAP((s)->start_block, d, 8, 24);\ -+} -+ -+#define SQUASHFS_SWAP_DIR_ENTRY_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry_2));\ -+ SQUASHFS_SWAP((s)->offset, d, 0, 13);\ -+ SQUASHFS_SWAP((s)->type, d, 13, 3);\ -+ SQUASHFS_SWAP((s)->size, d, 16, 8);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_ENTRY_2(s, d) {\ -+ SQUASHFS_SWAP_START\ -+ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry_2));\ -+ SQUASHFS_SWAP((s)->start_block, d, 0, 32);\ -+ SQUASHFS_SWAP((s)->size, d, 32, 32);\ -+} -+ -+#define SQUASHFS_SWAP_FRAGMENT_INDEXES_2(s, d, n) SQUASHFS_SWAP_INTS(s, d, n) -+ -+/* fragment and fragment table defines */ -+#define SQUASHFS_FRAGMENT_BYTES_2(A) (A * sizeof(struct squashfs_fragment_entry_2)) -+ -+#define SQUASHFS_FRAGMENT_INDEX_2(A) (SQUASHFS_FRAGMENT_BYTES_2(A) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_OFFSET_2(A) (SQUASHFS_FRAGMENT_BYTES_2(A) % \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEXES_2(A) ((SQUASHFS_FRAGMENT_BYTES_2(A) + \ -+ SQUASHFS_METADATA_SIZE - 1) / \ -+ SQUASHFS_METADATA_SIZE) -+ -+#define SQUASHFS_FRAGMENT_INDEX_BYTES_2(A) (SQUASHFS_FRAGMENT_INDEXES_2(A) *\ -+ sizeof(int)) -+ -+#endif -+ -+#ifdef __KERNEL__ -+ -+/* -+ * macros used to swap each structure entry, taking into account -+ * bitfields and different bitfield placing conventions on differing -+ * architectures -+ */ -+ -+#include -+ -+#ifdef __BIG_ENDIAN -+ /* convert from little endian to big endian */ -+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \ -+ tbits, b_pos) -+#else -+ /* convert from big endian to little endian */ -+#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \ -+ tbits, 64 - tbits - b_pos) -+#endif -+ -+#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\ -+ b_pos = pos % 8;\ -+ val = 0;\ -+ s = (unsigned char *)p + (pos / 8);\ -+ d = ((unsigned char *) &val) + 7;\ -+ for(bits = 0; bits < (tbits + b_pos); bits += 8) \ -+ *d-- = *s++;\ -+ value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\ -+} -+ -+#define SQUASHFS_MEMSET(s, d, n) memset(s, 0, n); -+ -+#endif -+#endif -diff -x .gitignore -Nurp linux-2.6.24/include/linux/squashfs_fs_i.h linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_i.h ---- linux-2.6.24/include/linux/squashfs_fs_i.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_i.h 2007-08-19 04:24:08.000000000 +0100 -@@ -0,0 +1,45 @@ -+#ifndef SQUASHFS_FS_I -+#define SQUASHFS_FS_I -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs_i.h -+ */ -+ -+struct squashfs_inode_info { -+ long long start_block; -+ unsigned int offset; -+ union { -+ struct { -+ long long fragment_start_block; -+ unsigned int fragment_size; -+ unsigned int fragment_offset; -+ long long block_list_start; -+ } s1; -+ struct { -+ long long directory_index_start; -+ unsigned int directory_index_offset; -+ unsigned int directory_index_count; -+ unsigned int parent_inode; -+ } s2; -+ } u; -+ struct inode vfs_inode; -+}; -+#endif -diff -x .gitignore -Nurp linux-2.6.24/include/linux/squashfs_fs_sb.h linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_sb.h ---- linux-2.6.24/include/linux/squashfs_fs_sb.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_sb.h 2007-08-19 04:24:26.000000000 +0100 -@@ -0,0 +1,76 @@ -+#ifndef SQUASHFS_FS_SB -+#define SQUASHFS_FS_SB -+/* -+ * Squashfs -+ * -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 -+ * Phillip Lougher -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2, -+ * or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * squashfs_fs_sb.h -+ */ -+ -+#include -+ -+struct squashfs_cache { -+ long long block; -+ int length; -+ long long next_index; -+ char *data; -+}; -+ -+struct squashfs_fragment_cache { -+ long long block; -+ int length; -+ unsigned int locked; -+ char *data; -+}; -+ -+struct squashfs_sb_info { -+ struct squashfs_super_block sblk; -+ int devblksize; -+ int devblksize_log2; -+ int swap; -+ struct squashfs_cache *block_cache; -+ struct squashfs_fragment_cache *fragment; -+ int next_cache; -+ int next_fragment; -+ int next_meta_index; -+ unsigned int *uid; -+ unsigned int *guid; -+ long long *fragment_index; -+ unsigned int *fragment_index_2; -+ char *read_page; -+ struct mutex read_data_mutex; -+ struct mutex read_page_mutex; -+ struct mutex block_cache_mutex; -+ struct mutex fragment_mutex; -+ struct mutex meta_index_mutex; -+ wait_queue_head_t waitq; -+ wait_queue_head_t fragment_wait_queue; -+ struct meta_index *meta_index; -+ z_stream stream; -+ long long *inode_lookup_table; -+ int unused_cache_blks; -+ int unused_frag_blks; -+ int (*read_inode)(struct inode *i, squashfs_inode_t \ -+ inode); -+ long long (*read_blocklist)(struct inode *inode, int \ -+ index, int readahead_blks, char *block_list, \ -+ unsigned short **block_p, unsigned int *bsize); -+ int (*read_fragment_index_table)(struct super_block *s); -+}; -+#endif -diff -x .gitignore -Nurp linux-2.6.24/init/do_mounts_rd.c linux-2.6.24-squashfs3.3/init/do_mounts_rd.c ---- linux-2.6.24/init/do_mounts_rd.c 2007-10-25 17:41:49.000000000 +0100 -+++ linux-2.6.24-squashfs3.3/init/do_mounts_rd.c 2007-11-01 05:06:25.000000000 +0000 -@@ -5,6 +5,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -39,6 +40,7 @@ static int __init crd_load(int in_fd, in - * numbers could not be found. - * - * We currently check for the following magic numbers: -+ * squashfs - * minix - * ext2 - * romfs -@@ -53,6 +55,7 @@ identify_ramdisk_image(int fd, int start - struct ext2_super_block *ext2sb; - struct romfs_super_block *romfsb; - struct cramfs_super *cramfsb; -+ struct squashfs_super_block *squashfsb; - int nblocks = -1; - unsigned char *buf; - -@@ -64,6 +67,7 @@ identify_ramdisk_image(int fd, int start - ext2sb = (struct ext2_super_block *) buf; - romfsb = (struct romfs_super_block *) buf; - cramfsb = (struct cramfs_super *) buf; -+ squashfsb = (struct squashfs_super_block *) buf; - memset(buf, 0xe5, size); - - /* -@@ -101,6 +105,18 @@ identify_ramdisk_image(int fd, int start - goto done; - } - -+ /* squashfs is at block zero too */ -+ if (squashfsb->s_magic == SQUASHFS_MAGIC) { -+ printk(KERN_NOTICE -+ "RAMDISK: squashfs filesystem found at block %d\n", -+ start_block); -+ if (squashfsb->s_major < 3) -+ nblocks = (squashfsb->bytes_used_2+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS; -+ else -+ nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS; -+ goto done; -+ } -+ - /* - * Read block 1 to test for minix and ext2 superblock - */ diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/versatile-armv6.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/versatile-armv6.patch deleted file mode 100644 index e2d0060ac3..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/versatile-armv6.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- - arch/arm/mm/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- linux-2.6.23.orig/arch/arm/mm/Kconfig -+++ linux-2.6.23/arch/arm/mm/Kconfig -@@ -343,11 +343,11 @@ config CPU_XSC3 - select IO_36 - - # ARMv6 - config CPU_V6 - bool "Support ARM V6 processor" -- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 -+ depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_VERSATILE_PB - default y if ARCH_MX3 - select CPU_32v6 - select CPU_ABRT_EV6 - select CPU_CACHE_V6 - select CPU_CACHE_VIPT diff --git a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/zylonite-boot.patch b/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/zylonite-boot.patch deleted file mode 100644 index f41928eca5..0000000000 --- a/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/zylonite-boot.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 04c42f566c68b757fdadf54e0e0f9dfe9f3f9b06 Mon Sep 17 00:00:00 2001 -From: eric miao -Date: Tue, 19 Jun 2007 16:42:53 +0800 -Subject: [PATCH] [PATCH] make zylonite boot - -1. reuse head-xscale.S for XSC3 - -2. add a workaround for machine ID assignment, which should be done - by boot loader ---- - arch/arm/boot/compressed/Makefile | 4 ++++ - arch/arm/boot/compressed/head-xscale.S | 5 +++++ - 2 files changed, 9 insertions(+) - -Index: linux-2.6-pxa3/arch/arm/boot/compressed/Makefile -=================================================================== ---- linux-2.6-pxa3.orig/arch/arm/boot/compressed/Makefile 2007-09-24 11:25:57.000000000 +0200 -+++ linux-2.6-pxa3/arch/arm/boot/compressed/Makefile 2007-09-24 12:26:53.000000000 +0200 -@@ -40,6 +40,10 @@ - OBJS += head-xscale.o - endif - -+ifeq ($(CONFIG_CPU_XSC3),y) -+OBJS += head-xscale.o -+endif -+ - ifeq ($(CONFIG_PXA_SHARPSL),y) - OBJS += head-sharpsl.o - endif -Index: linux-2.6-pxa3/arch/arm/boot/compressed/head-xscale.S -=================================================================== ---- linux-2.6-pxa3.orig/arch/arm/boot/compressed/head-xscale.S 2007-09-24 11:42:27.000000000 +0200 -+++ linux-2.6-pxa3/arch/arm/boot/compressed/head-xscale.S 2007-09-24 12:26:02.000000000 +0200 -@@ -33,6 +33,11 @@ - bic r0, r0, #0x1000 @ clear Icache - mcr p15, 0, r0, c1, c0, 0 - -+#ifdef CONFIG_MACH_ZYLONITE -+ mov r7, #(MACH_TYPE_ZYLONITE & 0xff) -+ orr r7, r7, #(MACH_TYPE_ZYLONITE & 0xff00) -+#endif -+ - #ifdef CONFIG_ARCH_COTULLA_IDP - mov r7, #MACH_TYPE_COTULLA_IDP - #endif diff --git a/meta/packages/linux/linux-rp-2.6.24/binutils-buildid-arm.patch b/meta/packages/linux/linux-rp-2.6.24/binutils-buildid-arm.patch new file mode 100644 index 0000000000..68e35e89e1 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/binutils-buildid-arm.patch @@ -0,0 +1,16 @@ +--- + arch/arm/kernel/vmlinux.lds.S | 1 + + 1 file changed, 1 insertion(+) + +Index: linux-2.6.22/arch/arm/kernel/vmlinux.lds.S +=================================================================== +--- linux-2.6.22.orig/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:32:29.000000000 +0200 ++++ linux-2.6.22/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:33:42.000000000 +0200 +@@ -94,6 +94,7 @@ + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT ++ *(.note.*) + #ifdef CONFIG_MMU + *(.fixup) + #endif diff --git a/meta/packages/linux/linux-rp-2.6.24/connectplus-prevent-oops-HACK.patch b/meta/packages/linux/linux-rp-2.6.24/connectplus-prevent-oops-HACK.patch new file mode 100644 index 0000000000..b5439c62e7 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/connectplus-prevent-oops-HACK.patch @@ -0,0 +1,17 @@ +Index: linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c +=================================================================== +--- linux-2.6.21.orig/drivers/net/wireless/hostap/hostap_hw.c 2007-07-07 12:45:39.000000000 +0100 ++++ linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c 2007-07-07 12:47:30.000000000 +0100 +@@ -2666,6 +2666,12 @@ + iface = netdev_priv(dev); + local = iface->local; + ++ if(dev->base_addr == 0) ++ { ++ printk(KERN_DEBUG "%s: IRQ before base_addr set\n", dev->name); ++ return IRQ_HANDLED; ++ } ++ + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); + + if (local->func->card_present && !local->func->card_present(local)) { diff --git a/meta/packages/linux/linux-rp-2.6.24/connectplus-remove-ide-HACK.patch b/meta/packages/linux/linux-rp-2.6.24/connectplus-remove-ide-HACK.patch new file mode 100644 index 0000000000..4414b21191 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/connectplus-remove-ide-HACK.patch @@ -0,0 +1,12 @@ +Index: linux-2.6.13/drivers/ide/legacy/ide-cs.c +=================================================================== +--- linux-2.6.13.orig/drivers/ide/legacy/ide-cs.c 2005-09-01 22:43:46.000000000 +0100 ++++ linux-2.6.13/drivers/ide/legacy/ide-cs.c 2005-09-01 22:45:46.000000000 +0100 +@@ -488,7 +488,6 @@ + PCMCIA_DEVICE_PROD_ID123("KODAK Picture Card ", "KODAK ", "V100K", 0x94a0d8f3, 0xe4fc3ea0, 0xe5e7eed4), + PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), + PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), +- PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_NULL, + }; + MODULE_DEVICE_TABLE(pcmcia, ide_ids); diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-akita b/meta/packages/linux/linux-rp-2.6.24/defconfig-akita new file mode 100644 index 0000000000..5e4560c39d --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-akita @@ -0,0 +1,1740 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Sun Jan 20 18:29:33 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_PXA_SHARPSL_25x is not set +CONFIG_PXA_SHARPSL_27x=y +# CONFIG_MACH_HX2750 is not set +CONFIG_MACH_AKITA=y +CONFIG_MACH_SPITZ=y +CONFIG_MACH_BORZOI=y +CONFIG_PXA27x=y +CONFIG_PXA_SHARP_Cxx00=y +CONFIG_PXA_SSP=y +# CONFIG_PXA_KEYS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARPSL_PM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=m + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 dyntick=enable debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +CONFIG_PXA_FICP=m +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_ATMEL is not set +CONFIG_AIRO_CS=m +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_CS=m + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_POWER=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_CORGI is not set +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_KEYBOARD_PXA27x is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_CORGI=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_USB_DSBR=m +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +CONFIG_USB_DABUSB=m + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_AC97_CODEC is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=m +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_I2S=m +CONFIG_SND_PXA2XX_SOC_SPITZ=m + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_WM8750=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +# CONFIG_AC97_BUS is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +CONFIG_USB_CYTHERM=m +# CONFIG_USB_PHIDGET is not set +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=m +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_SPITZ=y +# CONFIG_LEDS_TOSA is not set +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_SYSFS is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-bootcdx86 b/meta/packages/linux/linux-rp-2.6.24/defconfig-bootcdx86 new file mode 100644 index 0000000000..fda13665cd --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-bootcdx86 @@ -0,0 +1,1994 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Sun Jan 20 18:34:58 2008 +# +# CONFIG_64BIT is not set +CONFIG_X86_32=y +# CONFIG_X86_64 is not set +CONFIG_X86=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_MMU=y +CONFIG_ZONE_DMA=y +CONFIG_QUICKLIST=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_DMI=y +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +# CONFIG_ZONE_DMA32 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_AUDIT_ARCH is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +CONFIG_KTIME_SCALAR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor type and features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y +CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_X86_VSMP is not set +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_PARAVIRT_GUEST is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +CONFIG_M686=y +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_MPSC is not set +# CONFIG_MCORE2 is not set +# CONFIG_GENERIC_CPU is not set +CONFIG_X86_GENERIC=y +CONFIG_X86_CMPXCHG=y +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_XADD=y +CONFIG_X86_PPRO_FENCE=y +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +CONFIG_X86_GOOD_APIC=y +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_TSC=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_HPET_TIMER=y +CONFIG_NR_CPUS=8 +CONFIG_SCHED_SMT=y +CONFIG_SCHED_MC=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_MCE=y +CONFIG_X86_MCE_NONFATAL=y +CONFIG_X86_MCE_P4THERMAL=y +CONFIG_VM86=y +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +# CONFIG_X86_REBOOTFIXUPS is not set +# CONFIG_MICROCODE is not set +# CONFIG_X86_MSR is not set +# CONFIG_X86_CPUID is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_X86_PAE is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_NR_QUICK=1 +CONFIG_VIRT_TO_BUS=y +# CONFIG_MATH_EMULATION is not set +CONFIG_MTRR=y +# CONFIG_EFI is not set +CONFIG_IRQBALANCE=y +CONFIG_SECCOMP=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_KEXEC=y +CONFIG_PHYSICAL_START=0x100000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +CONFIG_HOTPLUG_CPU=y +CONFIG_COMPAT_VDSO=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_SMP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_HIBERNATION_SMP_POSSIBLE=y +# CONFIG_HIBERNATION is not set +CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y +# CONFIG_ACPI_PROCFS is not set +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y +# CONFIG_ACPI_VIDEO is not set +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_ASUS is not set +# CONFIG_ACPI_TOSHIBA is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y +CONFIG_ACPI_POWER=y +CONFIG_ACPI_SYSTEM=y +CONFIG_X86_PM_TIMER=y +CONFIG_ACPI_CONTAINER=y +# CONFIG_ACPI_SBS is not set +# CONFIG_APM is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Bus options (PCI etc.) +# +CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GOMMCONFIG is not set +# CONFIG_PCI_GODIRECT is not set +CONFIG_PCI_GOANY=y +CONFIG_PCI_BIOS=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_LEGACY=y +CONFIG_HT_IRQ=y +CONFIG_ISA_DMA_API=y +CONFIG_ISA=y +# CONFIG_EISA is not set +# CONFIG_MCA is not set +# CONFIG_SCx200 is not set +CONFIG_K8_NB=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats / Emulations +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_TOSHIBA_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VLSI_FIR is not set +# CONFIG_VIA_FIR is not set +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=y +# CONFIG_PARPORT_SERIAL is not set +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +# CONFIG_PARPORT_1284 is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +# CONFIG_ISAPNP is not set +# CONFIG_PNPBIOS is not set +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_MSI_LAPTOP is not set +# CONFIG_SONY_LAPTOP is not set +# CONFIG_THINKPAD_ACPI is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_BLK_DEV_IDEACPI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_CMD640=y +# CONFIG_BLK_DEV_CMD640_ENHANCED is not set +# CONFIG_BLK_DEV_IDEPNP is not set + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_RZ1000=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set + +# +# Other IDE chipsets support +# + +# +# Note: most of these also require special kernel boot parameters +# +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_QD65XX is not set +# CONFIG_BLK_DEV_UMC8672 is not set +CONFIG_BLK_DEV_IDEDMA=y +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +CONFIG_SCSI_DPT_I2O=m +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_SEAGATE is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_ULTRASTOR is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_NET_SB1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +# CONFIG_EL1 is not set +# CONFIG_EL2 is not set +# CONFIG_ELPLUS is not set +# CONFIG_EL16 is not set +# CONFIG_EL3 is not set +# CONFIG_3C515 is not set +CONFIG_VORTEX=m +CONFIG_TYPHOON=m +CONFIG_LANCE=m +CONFIG_NET_VENDOR_SMC=y +CONFIG_WD80x3=m +CONFIG_ULTRA=m +CONFIG_SMC9194=m +# CONFIG_NET_VENDOR_RACAL is not set +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=m +CONFIG_TULIP_MWI=y +CONFIG_TULIP_MMIO=y +CONFIG_TULIP_NAPI=y +CONFIG_TULIP_NAPI_HW_MITIGATION=y +CONFIG_DE4X5=m +CONFIG_WINBOND_840=m +CONFIG_DM9102=m +CONFIG_ULI526X=m +CONFIG_AT1700=m +CONFIG_DEPCA=m +CONFIG_HP100=m +CONFIG_NET_ISA=y +# CONFIG_E2100 is not set +# CONFIG_EWRK3 is not set +# CONFIG_EEXPRESS is not set +# CONFIG_EEXPRESS_PRO is not set +# CONFIG_HPLAN_PLUS is not set +# CONFIG_HPLAN is not set +# CONFIG_LP486E is not set +# CONFIG_ETH16I is not set +CONFIG_NE2000=y +# CONFIG_ZNET is not set +# CONFIG_SEEQ8005 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=m +CONFIG_PCNET32_NAPI=y +CONFIG_AMD8111_ETH=m +CONFIG_AMD8111E_NAPI=y +CONFIG_ADAPTEC_STARFIRE=m +CONFIG_ADAPTEC_STARFIRE_NAPI=y +CONFIG_AC3200=m +CONFIG_APRICOT=m +CONFIG_B44=m +CONFIG_B44_PCI_AUTOSELECT=y +CONFIG_B44_PCICORE_AUTOSELECT=y +CONFIG_B44_PCI=y +CONFIG_FORCEDETH=m +CONFIG_FORCEDETH_NAPI=y +CONFIG_CS89x0=m +CONFIG_EEPRO100=m +CONFIG_E100=m +CONFIG_FEALNX=m +CONFIG_NATSEMI=m +CONFIG_NE2K_PCI=y +CONFIG_8139CP=m +CONFIG_8139TOO=m +CONFIG_8139TOO_PIO=y +CONFIG_8139TOO_TUNE_TWISTER=y +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_SIS900=m +CONFIG_EPIC100=m +CONFIG_SUNDANCE=m +CONFIG_SUNDANCE_MMIO=y +CONFIG_TLAN=m +CONFIG_VIA_RHINE=m +CONFIG_VIA_RHINE_MMIO=y +CONFIG_VIA_RHINE_NAPI=y +CONFIG_SC92031=m +# CONFIG_NET_POCKET is not set +CONFIG_NETDEV_1000=y +CONFIG_ACENIC=m +CONFIG_ACENIC_OMIT_TIGON_I=y +CONFIG_DL2K=m +CONFIG_E1000=m +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +CONFIG_NS83820=m +CONFIG_HAMACHI=m +CONFIG_YELLOWFIN=m +CONFIG_R8169=m +CONFIG_R8169_NAPI=y +CONFIG_SIS190=m +CONFIG_SKGE=m +CONFIG_SKY2=m +CONFIG_SK98LIN=m +CONFIG_VIA_VELOCITY=m +CONFIG_TIGON3=m +CONFIG_BNX2=m +CONFIG_QLA3XXX=m +CONFIG_ATL1=m +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +CONFIG_S2IO=m +# CONFIG_S2IO_NAPI is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +CONFIG_HERMES=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +# CONFIG_PCI_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +# CONFIG_HOSTAP_PLX is not set +# CONFIG_HOSTAP_PCI is not set +# CONFIG_BCM43XX is not set +# CONFIG_ZD1211RW is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +CONFIG_TABLET_USB_WACOM=y +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_PNP=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_PRINTER=y +# CONFIG_LP_CONSOLE is not set +# CONFIG_PPDEV is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set +# CONFIG_MWAVE is not set +# CONFIG_PC8736x_GPIO is not set +# CONFIG_NSC_GPIO is not set +# CONFIG_CS5535_GPIO is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HPET is not set +# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +CONFIG_SSB=m +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_BWQCAM is not set +# CONFIG_VIDEO_CQCAM is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_STRADIS is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set +CONFIG_USB_DSBR=m +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_AGP=m +CONFIG_AGP_ALI=m +CONFIG_AGP_ATI=m +CONFIG_AGP_AMD=m +CONFIG_AGP_AMD64=m +CONFIG_AGP_INTEL=m +CONFIG_AGP_NVIDIA=m +CONFIG_AGP_SIS=m +CONFIG_AGP_SWORKS=m +CONFIG_AGP_VIA=m +CONFIG_AGP_EFFICEON=m +CONFIG_DRM=m +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +# CONFIG_DRM_I915 is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +CONFIG_FB_UVESA=m +# CONFIG_FB_VESA is not set +# CONFIG_FB_EFI is not set +# CONFIG_FB_HECUBA is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CORGI=m +# CONFIG_BACKLIGHT_PROGEAR is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_VIDEO_SELECT=y +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_MTS64 is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_PORTMAN2X4 is not set + +# +# ISA devices +# +# CONFIG_SND_ADLIB is not set +# CONFIG_SND_AD1816A is not set +# CONFIG_SND_AD1848 is not set +# CONFIG_SND_ALS100 is not set +# CONFIG_SND_AZT2320 is not set +# CONFIG_SND_CMI8330 is not set +# CONFIG_SND_CS4231 is not set +# CONFIG_SND_CS4232 is not set +# CONFIG_SND_CS4236 is not set +# CONFIG_SND_DT019X is not set +# CONFIG_SND_ES968 is not set +# CONFIG_SND_ES1688 is not set +# CONFIG_SND_ES18XX is not set +# CONFIG_SND_SC6000 is not set +# CONFIG_SND_GUSCLASSIC is not set +# CONFIG_SND_GUSEXTREME is not set +# CONFIG_SND_GUSMAX is not set +# CONFIG_SND_INTERWAVE is not set +# CONFIG_SND_INTERWAVE_STB is not set +# CONFIG_SND_OPL3SA2 is not set +# CONFIG_SND_OPTI92X_AD1848 is not set +# CONFIG_SND_OPTI92X_CS4231 is not set +# CONFIG_SND_OPTI93X is not set +# CONFIG_SND_MIRO is not set +# CONFIG_SND_SB8 is not set +# CONFIG_SND_SB16 is not set +# CONFIG_SND_SBAWE is not set +# CONFIG_SND_SGALAXY is not set +# CONFIG_SND_SSCAPE is not set +# CONFIG_SND_WAVEFRONT is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +CONFIG_SND_INTEL8X0=y +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AC97_POWER_SAVE is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_SL811_HCD=m +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +CONFIG_USB_CYTHERM=m +# CONFIG_USB_PHIDGET is not set +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_LGUEST is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_DMIID=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +# CONFIG_NFSD_TCP is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +# CONFIG_KPROBES is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +CONFIG_EARLY_PRINTK=y +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_MPPARSE=y +CONFIG_DOUBLEFAULT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_TWOFISH_586 is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_AES_586 is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-c7x0 b/meta/packages/linux/linux-rp-2.6.24/defconfig-c7x0 new file mode 100644 index 0000000000..a47e843a2e --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-c7x0 @@ -0,0 +1,1746 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Sun Jan 20 18:27:11 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +CONFIG_PXA_SHARPSL_25x=y +# CONFIG_PXA_SHARPSL_27x is not set +# CONFIG_MACH_HX2750 is not set +# CONFIG_MACH_POODLE is not set +CONFIG_MACH_CORGI=y +CONFIG_MACH_SHEPHERD=y +CONFIG_MACH_HUSKY=y +# CONFIG_MACH_TOSA is not set +CONFIG_PXA25x=y +CONFIG_PXA_SHARP_C7xx=y +CONFIG_PXA_SSP=y +# CONFIG_PXA_KEYS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +# CONFIG_IWMMXT is not set +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARPSL_PM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=m + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y +CONFIG_CPU_FREQ_PXA25x=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +CONFIG_PXA_FICP=m +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_ATMEL is not set +CONFIG_AIRO_CS=m +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_CS=m + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_POWER=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_CORGI=y +# CONFIG_KEYBOARD_SPITZ is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_CORGI=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_USB_DSBR=m +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +CONFIG_USB_DABUSB=m + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_PXA is not set +# CONFIG_FB_MBX is not set +CONFIG_FB_W100=y +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_AC97_CODEC is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=m +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_I2S=m +CONFIG_SND_PXA2XX_SOC_CORGI=m + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_WM8731=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +# CONFIG_AC97_BUS is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +CONFIG_USB_CYTHERM=m +# CONFIG_USB_PHIDGET is not set +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_CORGI=y +# CONFIG_LEDS_TOSA is not set +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_SYSFS is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-collie b/meta/packages/linux/linux-rp-2.6.24/defconfig-collie new file mode 100644 index 0000000000..d4b813e2cf --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-collie @@ -0,0 +1,1436 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Mon Jan 21 22:14:20 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +CONFIG_ARCH_SA1100=y +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# SA11x0 Implementations +# +# CONFIG_SA1100_ASSABET is not set +# CONFIG_SA1100_CERF is not set +CONFIG_SA1100_COLLIE=y +# CONFIG_SA1100_H3100 is not set +# CONFIG_SA1100_H3600 is not set +# CONFIG_SA1100_H3800 is not set +# CONFIG_SA1100_BADGE4 is not set +# CONFIG_SA1100_JORNADA720 is not set +# CONFIG_SA1100_HACKKIT is not set +# CONFIG_SA1100_LART is not set +# CONFIG_SA1100_PLEB is not set +# CONFIG_SA1100_SHANNON is not set +# CONFIG_SA1100_SIMPAD is not set +# CONFIG_SA1100_SSP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_SA1100=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4=y +CONFIG_CPU_CACHE_V4WB=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WB=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_SHARP_LOCOMO=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARPSL_PM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +# CONFIG_I82365 is not set +# CONFIG_TCIC is not set +CONFIG_PCMCIA_SA1100=m + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +CONFIG_PREEMPT=y +CONFIG_NO_IDLE_HZ=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=2 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySA0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 mem=32M fbcon=rotate:1 dyntick=enable debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_APM_EMULATION=m + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=m +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +CONFIG_SA1100_FIR=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_SHARP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_SA1100=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_PNP is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set + +# +# Other IDE chipsets support +# + +# +# Note: most of these also require special kernel boot parameters +# +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_QD65XX is not set +# CONFIG_BLK_DEV_UMC8672 is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_PCMCIA_RAYCS=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_CS=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +CONFIG_ATMEL=m +CONFIG_PCMCIA_ATMEL=m +CONFIG_AIRO_CS=m +CONFIG_PCMCIA_WL3501=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_CS=m +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_POWER=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_LOCOMO=m +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SA1100=y +CONFIG_SERIAL_SA1100_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia Capabilities Port drivers +# +CONFIG_MCP=y +CONFIG_MCP_SA11X0=y +CONFIG_MCP_UCB1200=y +CONFIG_MCP_UCB1200_TS=m +# CONFIG_MCP_COLLIE_TS is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_SA1100=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_LOCOMO=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_DUMMY=m +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# + +# +# SPI devices +# + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=m +CONFIG_MMC_DEBUG=y +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_SPI=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +CONFIG_LEDS_LOCOMO=m +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=m + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +CONFIG_FS_MBCACHE=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_SYSFS is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-htcuniversal b/meta/packages/linux/linux-rp-2.6.24/defconfig-htcuniversal new file mode 100644 index 0000000000..f121ddea90 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-htcuniversal @@ -0,0 +1,1307 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Sun Jan 20 21:46:02 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_DMABOUNCE=y + +# +# Intel PXA2xx/PXA3xx Implementations +# +CONFIG_ARCH_LUBBOCK=y +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +CONFIG_PXA25x=y +# CONFIG_PXA_KEYS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y +CONFIG_SA1111=y +CONFIG_FORCE_MAX_ZONEORDER=9 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y +CONFIG_CPU_FREQ_PXA25x=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_SUSPEND is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +CONFIG_IRLAN=y +# CONFIG_IRNET is not set +CONFIG_IRCOMM=y +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +CONFIG_IRDA_DEBUG=y + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=y + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +CONFIG_PXA_FICP=y +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=0 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_MTDRAM=m +CONFIG_MTDRAM_TOTAL_SIZE=4096 +CONFIG_MTDRAM_ERASE_SIZE=128 +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +CONFIG_ACX=m +CONFIG_ACX_MEM=y +# CONFIG_ACX_CS is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_POWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_ASIC3=y +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=32 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=m +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_DS1WM=y + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2433 is not set +CONFIG_W1_SLAVE_DS2760=y +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PDA_POWER=y +CONFIG_APM_POWER=y +CONFIG_BATTERY_DS2760=y +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_HTC_ASIC3=y +CONFIG_HTC_ASIC3_DS1WM=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +# CONFIG_FB_PXA_OVERLAY is not set +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_PXA is not set +CONFIG_MMC_ASIC3=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_ASIC3=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_DEBUG=y + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-hx2000 b/meta/packages/linux/linux-rp-2.6.24/defconfig-hx2000 new file mode 100644 index 0000000000..41eee3854a --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-hx2000 @@ -0,0 +1,1733 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Sun Jan 20 18:10:53 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +CONFIG_MACH_HX2750=y +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y +CONFIG_PXA_KEYS=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +CONFIG_PXA_FICP=m +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PXA2XX is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_ATMEL is not set +CONFIG_AIRO_CS=m +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_CS=m +# CONFIG_ZD1211RW is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_POWER=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=m +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_TSC2101=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_MFD_TSC2101=y +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_USB_DSBR=m +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +CONFIG_USB_DABUSB=m + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=m +CONFIG_SND_PXA2XX_SOC=m + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +CONFIG_USB_CYTHERM=m +# CONFIG_USB_PHIDGET is not set +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_SYSFS is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-poodle b/meta/packages/linux/linux-rp-2.6.24/defconfig-poodle new file mode 100644 index 0000000000..ecffc3aba6 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-poodle @@ -0,0 +1,1756 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Sun Jan 20 22:47:47 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +CONFIG_PXA_SHARPSL_25x=y +# CONFIG_PXA_SHARPSL_27x is not set +# CONFIG_MACH_HX2750 is not set +# CONFIG_MACH_HTCUNIVERSAL is not set +CONFIG_MACH_POODLE=y +# CONFIG_MACH_CORGI is not set +# CONFIG_MACH_SHEPHERD is not set +# CONFIG_MACH_HUSKY is not set +# CONFIG_MACH_TOSA is not set +CONFIG_PXA25x=y +CONFIG_PXA_SSP=y +# CONFIG_PXA_KEYS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +# CONFIG_IWMMXT is not set +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_LOCOMO=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARPSL_PM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 dyntick=enable debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y +CONFIG_CPU_FREQ_PXA25x=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +CONFIG_PXA_FICP=m +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_ATMEL is not set +CONFIG_AIRO_CS=m +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_CS=m +# CONFIG_ZD1211RW is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_POWER=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_LOCOMO=y +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_CORGI is not set +# CONFIG_KEYBOARD_SPITZ is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_CORGI=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_USB_DSBR=m +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +CONFIG_USB_DABUSB=m + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_LOCOMO=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_AC97_CODEC is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=m +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_I2S=m +CONFIG_SND_PXA2XX_SOC_POODLE=m + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_WM8731=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +# CONFIG_AC97_BUS is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +CONFIG_USB_CYTHERM=m +# CONFIG_USB_PHIDGET is not set +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_LOCOMO=y +# CONFIG_LEDS_TOSA is not set +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_SYSFS is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-qemuarm b/meta/packages/linux/linux-rp-2.6.24/defconfig-qemuarm new file mode 100644 index 0000000000..d2b8265214 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-qemuarm @@ -0,0 +1,1582 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Sun Jan 20 22:28:17 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +CONFIG_ARCH_VERSATILE=y +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Versatile platform type +# +CONFIG_ARCH_VERSATILE_PB=y +# CONFIG_MACH_VERSATILE_AB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +# CONFIG_CPU_V6 is not set +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_VIC=y +CONFIG_ICST307=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyAMA0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 dyntick=enable debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_TOSHIBA_FIR is not set +# CONFIG_VLSI_FIR is not set +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=51200 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +CONFIG_SCSI_SYM53C8XX_MMIO=y +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +# CONFIG_PCI_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +# CONFIG_HOSTAP_PLX is not set +# CONFIG_HOSTAP_PCI is not set +# CONFIG_BCM43XX is not set +# CONFIG_ZD1211RW is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +CONFIG_TABLET_USB_WACOM=y +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_STRADIS is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +CONFIG_USB_DSBR=m +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +CONFIG_USB_DABUSB=m + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CORGI=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USB_SL811_HCD=m +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +CONFIG_USB_CYTHERM=m +# CONFIG_USB_PHIDGET is not set +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PL031 is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_SYSFS is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +# CONFIG_NFSD_TCP is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-qemux86 b/meta/packages/linux/linux-rp-2.6.24/defconfig-qemux86 new file mode 100644 index 0000000000..e0094fec3c --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-qemux86 @@ -0,0 +1,1993 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Sun Jan 20 18:20:37 2008 +# +# CONFIG_64BIT is not set +CONFIG_X86_32=y +# CONFIG_X86_64 is not set +CONFIG_X86=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_MMU=y +CONFIG_ZONE_DMA=y +CONFIG_QUICKLIST=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_DMI=y +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +# CONFIG_ZONE_DMA32 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_AUDIT_ARCH is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +CONFIG_KTIME_SCALAR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor type and features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y +CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_X86_VSMP is not set +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_PARAVIRT_GUEST is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +CONFIG_M686=y +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_MPSC is not set +# CONFIG_MCORE2 is not set +# CONFIG_GENERIC_CPU is not set +CONFIG_X86_GENERIC=y +CONFIG_X86_CMPXCHG=y +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_XADD=y +CONFIG_X86_PPRO_FENCE=y +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +CONFIG_X86_GOOD_APIC=y +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_TSC=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=4 +# CONFIG_HPET_TIMER is not set +CONFIG_NR_CPUS=8 +CONFIG_SCHED_SMT=y +CONFIG_SCHED_MC=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_MCE=y +CONFIG_X86_MCE_NONFATAL=y +CONFIG_X86_MCE_P4THERMAL=y +CONFIG_VM86=y +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +# CONFIG_X86_REBOOTFIXUPS is not set +# CONFIG_MICROCODE is not set +# CONFIG_X86_MSR is not set +# CONFIG_X86_CPUID is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_X86_PAE is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_NR_QUICK=1 +CONFIG_VIRT_TO_BUS=y +# CONFIG_MATH_EMULATION is not set +CONFIG_MTRR=y +# CONFIG_EFI is not set +CONFIG_IRQBALANCE=y +CONFIG_SECCOMP=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_KEXEC=y +CONFIG_PHYSICAL_START=0x100000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +CONFIG_HOTPLUG_CPU=y +CONFIG_COMPAT_VDSO=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_SMP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_HIBERNATION_SMP_POSSIBLE=y +# CONFIG_HIBERNATION is not set +CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y +# CONFIG_ACPI_PROCFS is not set +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y +# CONFIG_ACPI_VIDEO is not set +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_ASUS is not set +# CONFIG_ACPI_TOSHIBA is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_EC=y +CONFIG_ACPI_POWER=y +CONFIG_ACPI_SYSTEM=y +CONFIG_X86_PM_TIMER=y +CONFIG_ACPI_CONTAINER=y +# CONFIG_ACPI_SBS is not set +# CONFIG_APM is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Bus options (PCI etc.) +# +CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GOMMCONFIG is not set +# CONFIG_PCI_GODIRECT is not set +CONFIG_PCI_GOANY=y +CONFIG_PCI_BIOS=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +CONFIG_HT_IRQ=y +CONFIG_ISA_DMA_API=y +CONFIG_ISA=y +# CONFIG_EISA is not set +# CONFIG_MCA is not set +# CONFIG_SCx200 is not set +CONFIG_K8_NB=y +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats / Emulations +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_TOSHIBA_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VLSI_FIR is not set +# CONFIG_VIA_FIR is not set +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=y +# CONFIG_PARPORT_SERIAL is not set +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +# CONFIG_PARPORT_1284 is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +# CONFIG_ISAPNP is not set +# CONFIG_PNPBIOS is not set +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_MSI_LAPTOP is not set +# CONFIG_SONY_LAPTOP is not set +# CONFIG_THINKPAD_ACPI is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_BLK_DEV_IDEACPI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_CMD640=y +# CONFIG_BLK_DEV_CMD640_ENHANCED is not set +# CONFIG_BLK_DEV_IDEPNP is not set + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_RZ1000=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set + +# +# Other IDE chipsets support +# + +# +# Note: most of these also require special kernel boot parameters +# +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_QD65XX is not set +# CONFIG_BLK_DEV_UMC8672 is not set +CONFIG_BLK_DEV_IDEDMA=y +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +CONFIG_SCSI_DPT_I2O=m +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_SEAGATE is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_ULTRASTOR is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_NET_SB1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +# CONFIG_EL1 is not set +# CONFIG_EL2 is not set +# CONFIG_ELPLUS is not set +# CONFIG_EL16 is not set +# CONFIG_EL3 is not set +# CONFIG_3C515 is not set +CONFIG_VORTEX=m +CONFIG_TYPHOON=m +CONFIG_LANCE=m +CONFIG_NET_VENDOR_SMC=y +CONFIG_WD80x3=m +CONFIG_ULTRA=m +CONFIG_SMC9194=m +# CONFIG_NET_VENDOR_RACAL is not set +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=m +CONFIG_TULIP_MWI=y +CONFIG_TULIP_MMIO=y +CONFIG_TULIP_NAPI=y +CONFIG_TULIP_NAPI_HW_MITIGATION=y +CONFIG_DE4X5=m +CONFIG_WINBOND_840=m +CONFIG_DM9102=m +CONFIG_ULI526X=m +CONFIG_AT1700=m +CONFIG_DEPCA=m +CONFIG_HP100=m +CONFIG_NET_ISA=y +# CONFIG_E2100 is not set +# CONFIG_EWRK3 is not set +# CONFIG_EEXPRESS is not set +# CONFIG_EEXPRESS_PRO is not set +# CONFIG_HPLAN_PLUS is not set +# CONFIG_HPLAN is not set +# CONFIG_LP486E is not set +# CONFIG_ETH16I is not set +CONFIG_NE2000=y +# CONFIG_ZNET is not set +# CONFIG_SEEQ8005 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=m +CONFIG_PCNET32_NAPI=y +CONFIG_AMD8111_ETH=m +CONFIG_AMD8111E_NAPI=y +CONFIG_ADAPTEC_STARFIRE=m +CONFIG_ADAPTEC_STARFIRE_NAPI=y +CONFIG_AC3200=m +CONFIG_APRICOT=m +CONFIG_B44=m +CONFIG_B44_PCI_AUTOSELECT=y +CONFIG_B44_PCICORE_AUTOSELECT=y +CONFIG_B44_PCI=y +CONFIG_FORCEDETH=m +CONFIG_FORCEDETH_NAPI=y +CONFIG_CS89x0=m +CONFIG_EEPRO100=m +CONFIG_E100=m +CONFIG_FEALNX=m +CONFIG_NATSEMI=m +CONFIG_NE2K_PCI=y +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_SIS900=m +CONFIG_EPIC100=m +CONFIG_SUNDANCE=m +CONFIG_SUNDANCE_MMIO=y +CONFIG_TLAN=m +CONFIG_VIA_RHINE=m +CONFIG_VIA_RHINE_MMIO=y +CONFIG_VIA_RHINE_NAPI=y +CONFIG_SC92031=m +# CONFIG_NET_POCKET is not set +CONFIG_NETDEV_1000=y +CONFIG_ACENIC=m +CONFIG_ACENIC_OMIT_TIGON_I=y +CONFIG_DL2K=m +CONFIG_E1000=m +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +CONFIG_NS83820=m +CONFIG_HAMACHI=m +CONFIG_YELLOWFIN=m +CONFIG_R8169=m +CONFIG_R8169_NAPI=y +CONFIG_SIS190=m +CONFIG_SKGE=m +CONFIG_SKY2=m +CONFIG_SK98LIN=m +CONFIG_VIA_VELOCITY=m +CONFIG_TIGON3=m +CONFIG_BNX2=m +CONFIG_QLA3XXX=m +CONFIG_ATL1=m +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +CONFIG_S2IO=m +# CONFIG_S2IO_NAPI is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +CONFIG_HERMES=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +# CONFIG_PCI_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +# CONFIG_HOSTAP_PLX is not set +# CONFIG_HOSTAP_PCI is not set +# CONFIG_BCM43XX is not set +# CONFIG_ZD1211RW is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +CONFIG_TABLET_USB_WACOM=y +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_PNP=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_PRINTER=y +# CONFIG_LP_CONSOLE is not set +# CONFIG_PPDEV is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set +# CONFIG_MWAVE is not set +# CONFIG_PC8736x_GPIO is not set +# CONFIG_NSC_GPIO is not set +# CONFIG_CS5535_GPIO is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HPET is not set +# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +CONFIG_SSB=m +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_BWQCAM is not set +# CONFIG_VIDEO_CQCAM is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_STRADIS is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set +CONFIG_USB_DSBR=m +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_AGP=m +CONFIG_AGP_ALI=m +CONFIG_AGP_ATI=m +CONFIG_AGP_AMD=m +CONFIG_AGP_AMD64=m +CONFIG_AGP_INTEL=m +CONFIG_AGP_NVIDIA=m +CONFIG_AGP_SIS=m +CONFIG_AGP_SWORKS=m +CONFIG_AGP_VIA=m +CONFIG_AGP_EFFICEON=m +CONFIG_DRM=m +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +# CONFIG_DRM_I915 is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +CONFIG_FB_UVESA=m +# CONFIG_FB_VESA is not set +# CONFIG_FB_EFI is not set +# CONFIG_FB_HECUBA is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CORGI=m +# CONFIG_BACKLIGHT_PROGEAR is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_VIDEO_SELECT=y +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_MTS64 is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_PORTMAN2X4 is not set + +# +# ISA devices +# +# CONFIG_SND_ADLIB is not set +# CONFIG_SND_AD1816A is not set +# CONFIG_SND_AD1848 is not set +# CONFIG_SND_ALS100 is not set +# CONFIG_SND_AZT2320 is not set +# CONFIG_SND_CMI8330 is not set +# CONFIG_SND_CS4231 is not set +# CONFIG_SND_CS4232 is not set +# CONFIG_SND_CS4236 is not set +# CONFIG_SND_DT019X is not set +# CONFIG_SND_ES968 is not set +# CONFIG_SND_ES1688 is not set +# CONFIG_SND_ES18XX is not set +# CONFIG_SND_SC6000 is not set +# CONFIG_SND_GUSCLASSIC is not set +# CONFIG_SND_GUSEXTREME is not set +# CONFIG_SND_GUSMAX is not set +# CONFIG_SND_INTERWAVE is not set +# CONFIG_SND_INTERWAVE_STB is not set +# CONFIG_SND_OPL3SA2 is not set +# CONFIG_SND_OPTI92X_AD1848 is not set +# CONFIG_SND_OPTI92X_CS4231 is not set +# CONFIG_SND_OPTI93X is not set +# CONFIG_SND_MIRO is not set +# CONFIG_SND_SB8 is not set +# CONFIG_SND_SB16 is not set +# CONFIG_SND_SBAWE is not set +# CONFIG_SND_SGALAXY is not set +# CONFIG_SND_SSCAPE is not set +# CONFIG_SND_WAVEFRONT is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +CONFIG_SND_INTEL8X0=y +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AC97_POWER_SAVE is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_SL811_HCD=m +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +CONFIG_USB_CYTHERM=m +# CONFIG_USB_PHIDGET is not set +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_LGUEST is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_DMIID=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +# CONFIG_NFSD_TCP is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +# CONFIG_KPROBES is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +CONFIG_EARLY_PRINTK=y +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_MPPARSE=y +CONFIG_DOUBLEFAULT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_TWOFISH_586 is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_AES_586 is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-spitz b/meta/packages/linux/linux-rp-2.6.24/defconfig-spitz new file mode 100644 index 0000000000..d0226301f7 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-spitz @@ -0,0 +1,1740 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Sun Jan 20 18:32:23 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_PXA_SHARPSL_25x is not set +CONFIG_PXA_SHARPSL_27x=y +# CONFIG_MACH_HX2750 is not set +CONFIG_MACH_AKITA=y +CONFIG_MACH_SPITZ=y +CONFIG_MACH_BORZOI=y +CONFIG_PXA27x=y +CONFIG_PXA_SHARP_Cxx00=y +CONFIG_PXA_SSP=y +# CONFIG_PXA_KEYS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARPSL_PM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/hda1 rootfstype=ext3 rootdelay=1 rw fbcon=rotate:1 dyntick=enable debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +CONFIG_PXA_FICP=m +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=m +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_ATMEL is not set +CONFIG_AIRO_CS=m +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_CS=m + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_POWER=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_CORGI is not set +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_KEYBOARD_PXA27x is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_CORGI=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_USB_DSBR=m +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +CONFIG_USB_DABUSB=m + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_AC97_CODEC is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=m +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_I2S=m +CONFIG_SND_PXA2XX_SOC_SPITZ=m + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_WM8750=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +# CONFIG_AC97_BUS is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +CONFIG_USB_CYTHERM=m +# CONFIG_USB_PHIDGET is not set +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=m +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_SPITZ=y +# CONFIG_LEDS_TOSA is not set +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_SYSFS is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/defconfig-zylonite b/meta/packages/linux/linux-rp-2.6.24/defconfig-zylonite new file mode 100644 index 0000000000..0cf0b23db5 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/defconfig-zylonite @@ -0,0 +1,1740 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8 +# Sun Jan 20 18:42:35 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# + +# +# Supported PXA3xx Processor Variants +# +CONFIG_CPU_PXA300=y +CONFIG_CPU_PXA310=y +CONFIG_CPU_PXA320=y +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_HX2750 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_MACH_ZYLONITE=y +# CONFIG_MACH_ARMCORE is not set +CONFIG_PXA3xx=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSC3=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_IO_36=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=m + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,38400 root=/dev/mtdblock2 rootfstype=jffs2 mem=64M dyntick=enable debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +CONFIG_PXA_FICP=m +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_ATMEL is not set +CONFIG_AIRO_CS=m +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_CS=m +# CONFIG_ZD1211RW is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +# CONFIG_USB_BELKIN is not set +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +# CONFIG_USB_NET_ZAURUS is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_POWER=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_USB_DSBR=m +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +CONFIG_USB_DABUSB=m + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_DEFERRED_IO is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_LCD_QVGA is not set +CONFIG_FB_PXA_LCD_VGA=y +CONFIG_FB_PXA_OVERLAY=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CORGI=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=m +CONFIG_SND_PXA2XX_SOC=m + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +CONFIG_USB_CYTHERM=m +# CONFIG_USB_PHIDGET is not set +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_SYSFS is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-rp-2.6.24/hostap-monitor-mode.patch b/meta/packages/linux/linux-rp-2.6.24/hostap-monitor-mode.patch new file mode 100644 index 0000000000..641fd19e50 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/hostap-monitor-mode.patch @@ -0,0 +1,209 @@ +This is a patch that I've been maintaining for a few years, and I'd +really like to see it added to the mainstream zaurus kernel so I can +finally stop distributing my own. + +This patch only effects the card while in monitor mode, and does not +cause any known stability issues. + +http://patches.aircrack-ng.org/hostap-kernel-2.6.18.patch + +Rick Farina (Zero_Chaos) + +diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c +--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c 2006-09-21 01:26:27.000000000 -0400 ++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c 2006-09-21 01:30:18.000000000 -0400 +@@ -69,6 +69,9 @@ + iface = netdev_priv(dev); + local = iface->local; + ++ if (local->iw_mode == IW_MODE_MONITOR) ++ goto xmit; ++ + if (skb->len < ETH_HLEN) { + printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb " + "(len=%d)\n", dev->name, skb->len); +@@ -234,6 +237,7 @@ + memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN); + } + ++xmit: + iface->stats.tx_packets++; + iface->stats.tx_bytes += skb->len; + +@@ -404,8 +408,6 @@ + } + + if (skb->len < 24) { +- printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb " +- "(len=%d)\n", dev->name, skb->len); + ret = 0; + iface->stats.tx_dropped++; + goto fail; +Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.orig +Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.rej +diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c +--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c 2006-09-21 01:26:27.000000000 -0400 ++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c 2006-09-21 01:30:18.000000000 -0400 +@@ -1005,6 +1005,35 @@ + return fid; + } + ++static int prism2_monitor_enable(struct net_device *dev) ++{ ++ if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, 5)) { ++ printk(KERN_DEBUG "Port type setting for monitor mode " ++ "failed\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ if (hfa384x_cmd(dev, HFA384X_CMDCODE_TEST | (0x0a << 8), ++ 0, NULL, NULL)) { ++ printk(KERN_DEBUG "Could not enter testmode 0x0a\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, ++ HFA384X_WEPFLAGS_PRIVACYINVOKED | ++ HFA384X_WEPFLAGS_HOSTENCRYPT | ++ HFA384X_WEPFLAGS_HOSTDECRYPT)) { ++ printk(KERN_DEBUG "WEP flags setting failed\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, 1)) { ++ printk(KERN_DEBUG "Could not set promiscuous mode\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ return 0; ++} + + static int prism2_reset_port(struct net_device *dev) + { +@@ -1031,6 +1060,10 @@ + "port\n", dev->name); + } + ++ if (local->iw_mode == IW_MODE_MONITOR) ++ /* force mode 0x0a after port 0 reset */ ++ return prism2_monitor_enable(dev); ++ + /* It looks like at least some STA firmware versions reset + * fragmentation threshold back to 2346 after enable command. Restore + * the configured value, if it differs from this default. */ +@@ -1466,6 +1499,10 @@ + return 1; + } + ++ if (local->iw_mode == IW_MODE_MONITOR) ++ /* force mode 0x0a after port 0 reset */ ++ prism2_monitor_enable(dev); ++ + local->hw_ready = 1; + local->hw_reset_tries = 0; + local->hw_resetting = 0; +@@ -3156,6 +3193,7 @@ + local->func->hw_config = prism2_hw_config; + local->func->hw_reset = prism2_hw_reset; + local->func->hw_shutdown = prism2_hw_shutdown; ++ local->func->monitor_enable = prism2_monitor_enable; + local->func->reset_port = prism2_reset_port; + local->func->schedule_reset = prism2_schedule_reset; + #ifdef PRISM2_DOWNLOAD_SUPPORT +Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_hw.c.orig +diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c +--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c 2006-09-21 01:26:27.000000000 -0400 ++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c 2006-09-21 01:30:18.000000000 -0400 +@@ -1104,33 +1104,7 @@ + + printk(KERN_DEBUG "Enabling monitor mode\n"); + hostap_monitor_set_type(local); +- +- if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, +- HFA384X_PORTTYPE_PSEUDO_IBSS)) { +- printk(KERN_DEBUG "Port type setting for monitor mode " +- "failed\n"); +- return -EOPNOTSUPP; +- } +- +- /* Host decrypt is needed to get the IV and ICV fields; +- * however, monitor mode seems to remove WEP flag from frame +- * control field */ +- if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS, +- HFA384X_WEPFLAGS_HOSTENCRYPT | +- HFA384X_WEPFLAGS_HOSTDECRYPT)) { +- printk(KERN_DEBUG "WEP flags setting failed\n"); +- return -EOPNOTSUPP; +- } +- +- if (local->func->reset_port(dev) || +- local->func->cmd(dev, HFA384X_CMDCODE_TEST | +- (HFA384X_TEST_MONITOR << 8), +- 0, NULL, NULL)) { +- printk(KERN_DEBUG "Setting monitor mode failed\n"); +- return -EOPNOTSUPP; +- } +- +- return 0; ++ return local->func->reset_port(dev); + } + + +@@ -1199,7 +1173,7 @@ + local->iw_mode = *mode; + + if (local->iw_mode == IW_MODE_MONITOR) +- hostap_monitor_mode_enable(local); ++ return hostap_monitor_mode_enable(local); + else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt && + !local->fw_encrypt_ok) { + printk(KERN_DEBUG "%s: defaulting to host-based encryption as " +diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c +--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c 2006-09-21 01:26:27.000000000 -0400 ++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c 2006-09-21 01:30:18.000000000 -0400 +@@ -331,7 +331,7 @@ + if (local->iw_mode == IW_MODE_REPEAT) + return HFA384X_PORTTYPE_WDS; + if (local->iw_mode == IW_MODE_MONITOR) +- return HFA384X_PORTTYPE_PSEUDO_IBSS; ++ return 5; /*HFA384X_PORTTYPE_PSEUDO_IBSS;*/ + return HFA384X_PORTTYPE_HOSTAP; + } + +Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_main.c.orig +diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c +--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c 2006-09-21 01:26:27.000000000 -0400 ++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c 2006-09-21 01:30:18.000000000 -0400 +@@ -48,6 +48,8 @@ + { 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID }, + /* Samsung MagicLAN SWL-2210P */ + { 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID }, ++ /* NETGEAR MA311 */ ++ { 0x1385, 0x3872, PCI_ANY_ID, PCI_ANY_ID }, + { 0 } + }; + +Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_pci.c.orig +diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c +--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c 2006-09-21 01:26:27.000000000 -0400 ++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c 2006-09-21 01:30:18.000000000 -0400 +@@ -101,6 +101,7 @@ + { 0xc250, 0x0002 } /* EMTAC A2424i */, + { 0xd601, 0x0002 } /* Z-Com XI300 */, + { 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */, ++ { 0xd601, 0x0010 } /* Zcomax XI-325H 100mW */, + { 0, 0} + }; + +Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_plx.c.orig +diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h +--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h 2006-09-21 01:26:27.000000000 -0400 ++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h 2006-09-21 01:30:18.000000000 -0400 +@@ -575,6 +575,7 @@ + int (*hw_config)(struct net_device *dev, int initial); + void (*hw_reset)(struct net_device *dev); + void (*hw_shutdown)(struct net_device *dev, int no_disable); ++ int (*monitor_enable)(struct net_device *dev); + int (*reset_port)(struct net_device *dev); + void (*schedule_reset)(local_info_t *local); + int (*download)(local_info_t *local, diff --git a/meta/packages/linux/linux-rp-2.6.24/htcuni-acx.patch b/meta/packages/linux/linux-rp-2.6.24/htcuni-acx.patch new file mode 100644 index 0000000000..1ccebddc8d --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/htcuni-acx.patch @@ -0,0 +1,33527 @@ +--- + drivers/net/wireless/Kconfig | 31 + drivers/net/wireless/Makefile | 2 + drivers/net/wireless/acx/Kconfig | 113 + drivers/net/wireless/acx/Makefile | 21 + drivers/net/wireless/acx/acx.h | 14 + drivers/net/wireless/acx/acx_config.h | 50 + drivers/net/wireless/acx/acx_func.h | 710 ++ + drivers/net/wireless/acx/acx_hw.h | 18 + drivers/net/wireless/acx/acx_struct.h | 2114 ++++++++ + drivers/net/wireless/acx/common.c | 7388 ++++++++++++++++++++++++++++ + drivers/net/wireless/acx/conv.c | 504 + + drivers/net/wireless/acx/cs.c | 5703 +++++++++++++++++++++ + drivers/net/wireless/acx/htcsable_acx.c | 118 + drivers/net/wireless/acx/htcuniversal_acx.c | 108 + drivers/net/wireless/acx/hx4700_acx.c | 108 + drivers/net/wireless/acx/ioctl.c | 2748 ++++++++++ + drivers/net/wireless/acx/mem.c | 5363 ++++++++++++++++++++ + drivers/net/wireless/acx/pci.c | 4234 ++++++++++++++++ + drivers/net/wireless/acx/rx3000_acx.c | 110 + drivers/net/wireless/acx/setrate.c | 213 + drivers/net/wireless/acx/usb.c | 1922 +++++++ + drivers/net/wireless/acx/wlan.c | 424 + + drivers/net/wireless/acx/wlan_compat.h | 260 + drivers/net/wireless/acx/wlan_hdr.h | 497 + + drivers/net/wireless/acx/wlan_mgmt.h | 582 ++ + 25 files changed, 33355 insertions(+) + +Index: linux-2.6.23/drivers/net/wireless/acx/acx_config.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/acx_config.h 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,50 @@ ++#define ACX_RELEASE "v0.3.36" ++ ++/* ++ * Test out all the channels in reg domain 0x10 ++ */ ++#define ACX_ALLOW_ALLCHANNELS ++ ++/* set to 0 if you don't want any debugging code to be compiled in */ ++/* set to 1 if you want some debugging */ ++/* set to 2 if you want extensive debug log */ ++#define ACX_DEBUG 0 ++ ++/* ++ * Since we'll be changing channels a lot ++#define ACX_DEFAULT_MSG (L_ASSOC|L_INIT) ++*/ ++#define ACX_DEFAULT_MSG (L_ASSOC|L_INIT) ++ ++/* assume 32bit I/O width ++ * (16bit is also compatible with Compact Flash) */ ++#define ACX_IO_WIDTH 32 ++ ++/* Set this to 1 if you want monitor mode to use ++ * phy header. Currently it is not useful anyway since we ++ * don't know what useful info (if any) is in phy header. ++ * If you want faster/smaller code, say 0 here */ ++#define WANT_PHY_HDR 0 ++ ++/* whether to do Tx descriptor cleanup in softirq (i.e. not in IRQ ++ * handler) or not. Note that doing it later does slightly increase ++ * system load, so still do that stuff in the IRQ handler for now, ++ * even if that probably means worse latency */ ++#define TX_CLEANUP_IN_SOFTIRQ 0 ++ ++/* if you want very experimental 802.11 power save mode features */ ++#define POWER_SAVE_80211 0 ++ ++/* if you want very early packet fragmentation bits and pieces */ ++#define ACX_FRAGMENTATION 0 ++ ++/* Locking: */ ++/* very talkative */ ++/* #define PARANOID_LOCKING 1 */ ++/* normal (use when bug-free) */ ++#define DO_LOCKING 1 ++/* else locking is disabled! */ ++ ++/* 0 - normal mode */ ++/* 1 - development/debug: probe for IEs on modprobe */ ++#define CMD_DISCOVERY 0 +Index: linux-2.6.23/drivers/net/wireless/acx/acx_func.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/acx_func.h 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,710 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++ ++ ++/*********************************************************************** ++** LOGGING ++** ++** - Avoid SHOUTING needlessly. Avoid excessive verbosity. ++** Gradually remove messages which are old debugging aids. ++** ++** - Use printk() for messages which are to be always logged. ++** Supply either 'acx:' or ':' prefix so that user ++** can figure out who's speaking among other kernel chatter. ++** acx: is for general issues (e.g. "acx: no firmware image!") ++** while : is related to a particular device ++** (think about multi-card setup). Double check that message ++** is not confusing to the average user. ++** ++** - use printk KERN_xxx level only if message is not a WARNING ++** but is INFO, ERR etc. ++** ++** - Use printk_ratelimited() for messages which may flood ++** (e.g. "rx DUP pkt!"). ++** ++** - Use log() for messages which may be omitted (and they ++** _will_ be omitted in non-debug builds). Note that ++** message levels may be disabled at compile-time selectively, ++** thus select them wisely. Example: L_DEBUG is the lowest ++** (most likely to be compiled out) -> use for less important stuff. ++** ++** - Do not print important stuff with log(), or else people ++** will never build non-debug driver. ++** ++** Style: ++** hex: capital letters, zero filled (e.g. 0x02AC) ++** str: dont start from capitals, no trailing periods ("tx: queue is stopped") ++*/ ++#if ACX_DEBUG > 1 ++ ++void log_fn_enter(const char *funcname); ++void log_fn_exit(const char *funcname); ++void log_fn_exit_v(const char *funcname, int v); ++ ++#define FN_ENTER \ ++ do { \ ++ if (unlikely(acx_debug & L_FUNC)) { \ ++ log_fn_enter(__func__); \ ++ } \ ++ } while (0) ++ ++#define FN_EXIT1(v) \ ++ do { \ ++ if (unlikely(acx_debug & L_FUNC)) { \ ++ log_fn_exit_v(__func__, v); \ ++ } \ ++ } while (0) ++#define FN_EXIT0 \ ++ do { \ ++ if (unlikely(acx_debug & L_FUNC)) { \ ++ log_fn_exit(__func__); \ ++ } \ ++ } while (0) ++ ++#else ++ ++#define FN_ENTER ++#define FN_EXIT1(v) ++#define FN_EXIT0 ++ ++#endif /* ACX_DEBUG > 1 */ ++ ++ ++#if ACX_DEBUG ++ ++#define log(chan, args...) \ ++ do { \ ++ if (acx_debug & (chan)) \ ++ printk(KERN_DEBUG args); \ ++ } while (0) ++#define printk_ratelimited(args...) printk(args) ++ ++#else /* Non-debug build: */ ++ ++#define log(chan, args...) ++/* Standard way of log flood prevention */ ++#define printk_ratelimited(args...) \ ++do { \ ++ if (printk_ratelimit()) \ ++ printk(args); \ ++} while (0) ++ ++#endif /* ACX_DEBUG */ ++ ++void acx_print_mac(const char *head, const u8 *mac, const char *tail); ++ ++/* Optimized out to nothing in non-debug build */ ++static inline void ++acxlog_mac(int level, const char *head, const u8 *mac, const char *tail) ++{ ++ if (acx_debug & level) { ++ acx_print_mac(head, mac, tail); ++ } ++} ++ ++ ++/*********************************************************************** ++** MAC address helpers ++*/ ++static inline void ++MAC_COPY(u8 *mac, const u8 *src) ++{ ++ *(u32*)mac = *(u32*)src; ++ ((u16*)mac)[2] = ((u16*)src)[2]; ++ /* kernel's memcpy will do the same: memcpy(dst, src, ETH_ALEN); */ ++} ++ ++static inline void ++MAC_FILL(u8 *mac, u8 val) ++{ ++ memset(mac, val, ETH_ALEN); ++} ++ ++static inline void ++MAC_BCAST(u8 *mac) ++{ ++ ((u16*)mac)[2] = *(u32*)mac = -1; ++} ++ ++static inline void ++MAC_ZERO(u8 *mac) ++{ ++ ((u16*)mac)[2] = *(u32*)mac = 0; ++} ++ ++static inline int ++mac_is_equal(const u8 *a, const u8 *b) ++{ ++ /* can't beat this */ ++ return memcmp(a, b, ETH_ALEN) == 0; ++} ++ ++static inline int ++mac_is_bcast(const u8 *mac) ++{ ++ /* AND together 4 first bytes with sign-extended 2 last bytes ++ ** Only bcast address gives 0xffffffff. +1 gives 0 */ ++ return ( *(s32*)mac & ((s16*)mac)[2] ) + 1 == 0; ++} ++ ++static inline int ++mac_is_zero(const u8 *mac) ++{ ++ return ( *(u32*)mac | ((u16*)mac)[2] ) == 0; ++} ++ ++static inline int ++mac_is_directed(const u8 *mac) ++{ ++ return (mac[0] & 1)==0; ++} ++ ++static inline int ++mac_is_mcast(const u8 *mac) ++{ ++ return (mac[0] & 1) && !mac_is_bcast(mac); ++} ++ ++#define MACSTR "%02X:%02X:%02X:%02X:%02X:%02X" ++#define MAC(bytevector) \ ++ ((unsigned char *)bytevector)[0], \ ++ ((unsigned char *)bytevector)[1], \ ++ ((unsigned char *)bytevector)[2], \ ++ ((unsigned char *)bytevector)[3], \ ++ ((unsigned char *)bytevector)[4], \ ++ ((unsigned char *)bytevector)[5] ++ ++ ++/*********************************************************************** ++** Random helpers ++*/ ++#define TO_STRING(x) #x ++#define STRING(x) TO_STRING(x) ++ ++#define CLEAR_BIT(val, mask) ((val) &= ~(mask)) ++#define SET_BIT(val, mask) ((val) |= (mask)) ++ ++/* undefined if v==0 */ ++static inline unsigned int ++lowest_bit(u16 v) ++{ ++ unsigned int n = 0; ++ while (!(v & 0xf)) { v>>=4; n+=4; } ++ while (!(v & 1)) { v>>=1; n++; } ++ return n; ++} ++ ++/* undefined if v==0 */ ++static inline unsigned int ++highest_bit(u16 v) ++{ ++ unsigned int n = 0; ++ while (v>0xf) { v>>=4; n+=4; } ++ while (v>1) { v>>=1; n++; } ++ return n; ++} ++ ++/* undefined if v==0 */ ++static inline int ++has_only_one_bit(u16 v) ++{ ++ return ((v-1) ^ v) >= v; ++} ++ ++ ++static inline int ++is_hidden_essid(char *essid) ++{ ++ return (('\0' == essid[0]) || ++ ((' ' == essid[0]) && ('\0' == essid[1]))); ++} ++ ++/*********************************************************************** ++** LOCKING ++** We have adev->sem and adev->lock. ++** ++** We employ following naming convention in order to get locking right: ++** ++** acx_e_xxxx - external entry points called from process context. ++** It is okay to sleep. adev->sem is to be taken on entry. ++** acx_i_xxxx - external entry points possibly called from atomic context. ++** Sleeping is not allowed (and thus down(sem) is not legal!) ++** acx_s_xxxx - potentially sleeping functions. Do not ever call under lock! ++** acx_l_xxxx - functions which expect lock to be already taken. ++** rest - non-sleeping functions which do not require locking ++** but may be run under lock ++** ++** A small number of local helpers do not have acx_[eisl]_ prefix. ++** They are always close to caller and are to be reviewed locally. ++** ++** Theory of operation: ++** ++** All process-context entry points (_e_ functions) take sem ++** immediately. IRQ handler and other 'atomic-context' entry points ++** (_i_ functions) take lock immediately on entry, but dont take sem ++** because that might sleep. ++** ++** Thus *all* code is either protected by sem or lock, or both. ++** ++** Code which must not run concurrently with IRQ takes lock. ++** Such code is marked with _l_. ++** ++** This results in the following rules of thumb useful in code review: ++** ++** + If a function calls _s_ fn, it must be an _s_ itself. ++** + You can call _l_ fn only (a) from another _l_ fn ++** or (b) from _s_, _e_ or _i_ fn by taking lock, calling _l_, ++** and dropping lock. ++** + All IRQ code runs under lock. ++** + Any _s_ fn is running under sem. ++** + Code under sem can race only with IRQ code. ++** + Code under sem+lock cannot race with anything. ++*/ ++ ++/* These functions *must* be inline or they will break horribly on SPARC, due ++ * to its weird semantics for save/restore flags */ ++ ++#if defined(PARANOID_LOCKING) /* Lock debugging */ ++ ++void acx_lock_debug(acx_device_t *adev, const char* where); ++void acx_unlock_debug(acx_device_t *adev, const char* where); ++void acx_down_debug(acx_device_t *adev, const char* where); ++void acx_up_debug(acx_device_t *adev, const char* where); ++void acx_lock_unhold(void); ++void acx_sem_unhold(void); ++ ++static inline void ++acx_lock_helper(acx_device_t *adev, unsigned long *fp, const char* where) ++{ ++ acx_lock_debug(adev, where); ++ spin_lock_irqsave(&adev->lock, *fp); ++} ++static inline void ++acx_unlock_helper(acx_device_t *adev, unsigned long *fp, const char* where) ++{ ++ acx_unlock_debug(adev, where); ++ spin_unlock_irqrestore(&adev->lock, *fp); ++} ++static inline void ++acx_down_helper(acx_device_t *adev, const char* where) ++{ ++ acx_down_debug(adev, where); ++} ++static inline void ++acx_up_helper(acx_device_t *adev, const char* where) ++{ ++ acx_up_debug(adev, where); ++} ++#define acx_lock(adev, flags) acx_lock_helper(adev, &(flags), __FILE__ ":" STRING(__LINE__)) ++#define acx_unlock(adev, flags) acx_unlock_helper(adev, &(flags), __FILE__ ":" STRING(__LINE__)) ++#define acx_sem_lock(adev) acx_down_helper(adev, __FILE__ ":" STRING(__LINE__)) ++#define acx_sem_unlock(adev) acx_up_helper(adev, __FILE__ ":" STRING(__LINE__)) ++ ++#elif defined(DO_LOCKING) ++ ++#define acx_lock(adev, flags) spin_lock_irqsave(&adev->lock, flags) ++#define acx_unlock(adev, flags) spin_unlock_irqrestore(&adev->lock, flags) ++#define acx_sem_lock(adev) down(&adev->sem) ++#define acx_sem_unlock(adev) up(&adev->sem) ++#define acx_lock_unhold() ((void)0) ++#define acx_sem_unhold() ((void)0) ++ ++#else /* no locking! :( */ ++ ++#define acx_lock(adev, flags) ((void)0) ++#define acx_unlock(adev, flags) ((void)0) ++#define acx_sem_lock(adev) ((void)0) ++#define acx_sem_unlock(adev) ((void)0) ++#define acx_lock_unhold() ((void)0) ++#define acx_sem_unhold() ((void)0) ++ ++#endif ++ ++ ++/*********************************************************************** ++*/ ++ ++/* Can race with rx path (which is not protected by sem): ++** rx -> process_[re]assocresp() -> set_status(ASSOCIATED) -> wake_queue() ++** Can race with tx_complete IRQ: ++** IRQ -> acxpci_l_clean_txdesc -> acx_wake_queue ++** Review carefully all callsites */ ++static inline void ++acx_stop_queue(struct net_device *ndev, const char *msg) ++{ ++ if (netif_queue_stopped(ndev)) ++ return; ++ ++ netif_stop_queue(ndev); ++ if (msg) ++ log(L_BUFT, "tx: stop queue %s\n", msg); ++} ++ ++static inline int ++acx_queue_stopped(struct net_device *ndev) ++{ ++ return netif_queue_stopped(ndev); ++} ++ ++/* ++static inline void ++acx_start_queue(struct net_device *ndev, const char *msg) ++{ ++ netif_start_queue(ndev); ++ if (msg) ++ log(L_BUFT, "tx: start queue %s\n", msg); ++} ++*/ ++ ++static inline void ++acx_wake_queue(struct net_device *ndev, const char *msg) ++{ ++ netif_wake_queue(ndev); ++ if (msg) ++ log(L_BUFT, "tx: wake queue %s\n", msg); ++} ++ ++static inline void ++acx_carrier_off(struct net_device *ndev, const char *msg) ++{ ++ netif_carrier_off(ndev); ++ if (msg) ++ log(L_BUFT, "tx: carrier off %s\n", msg); ++} ++ ++static inline void ++acx_carrier_on(struct net_device *ndev, const char *msg) ++{ ++ netif_carrier_on(ndev); ++ if (msg) ++ log(L_BUFT, "tx: carrier on %s\n", msg); ++} ++ ++/* This function does not need locking UNLESS you call it ++** as acx_set_status(ACX_STATUS_4_ASSOCIATED), bacause this can ++** wake queue. This can race with stop_queue elsewhere. */ ++void acx_set_status(acx_device_t *adev, u16 status); ++ ++ ++/*********************************************************************** ++** Communication with firmware ++*/ ++#define CMD_TIMEOUT_MS(n) (n) ++#define ACX_CMD_TIMEOUT_DEFAULT CMD_TIMEOUT_MS(50) ++ ++#if ACX_DEBUG ++ ++/* We want to log cmd names */ ++int acxpci_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr); ++int acxmem_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr); ++int acxusb_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr); ++static inline int ++acx_s_issue_cmd_timeo_debug(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout, const char* cmdstr) ++{ ++ if (IS_MEM(adev)) ++ return acxmem_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr); ++ if (IS_PCI(adev)) ++ return acxpci_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr); ++ return acxusb_s_issue_cmd_timeo_debug(adev, cmd, param, len, timeout, cmdstr); ++} ++#define acx_s_issue_cmd(adev,cmd,param,len) \ ++ acx_s_issue_cmd_timeo_debug(adev,cmd,param,len,ACX_CMD_TIMEOUT_DEFAULT,#cmd) ++#define acx_s_issue_cmd_timeo(adev,cmd,param,len,timeo) \ ++ acx_s_issue_cmd_timeo_debug(adev,cmd,param,len,timeo,#cmd) ++int acx_s_configure_debug(acx_device_t *adev, void *pdr, int type, const char* str); ++#define acx_s_configure(adev,pdr,type) \ ++ acx_s_configure_debug(adev,pdr,type,#type) ++int acx_s_interrogate_debug(acx_device_t *adev, void *pdr, int type, const char* str); ++#define acx_s_interrogate(adev,pdr,type) \ ++ acx_s_interrogate_debug(adev,pdr,type,#type) ++ ++#else ++ ++int acxpci_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout); ++int acxmem_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout); ++int acxusb_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout); ++static inline int ++acx_s_issue_cmd_timeo(acx_device_t *adev, unsigned cmd, void *param, unsigned len, unsigned timeout) ++{ ++ if (IS_MEM(adev)) ++ return acxmem_s_issue_cmd_timeo(adev, cmd, param, len, timeout); ++ if (IS_PCI(adev)) ++ return acxpci_s_issue_cmd_timeo(adev, cmd, param, len, timeout); ++ return acxusb_s_issue_cmd_timeo(adev, cmd, param, len, timeout); ++} ++static inline int ++acx_s_issue_cmd(acx_device_t *adev, unsigned cmd, void *param, unsigned len) ++{ ++ if (IS_MEM(adev)) ++ return acxmem_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT); ++ if (IS_PCI(adev)) ++ return acxpci_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT); ++ return acxusb_s_issue_cmd_timeo(adev, cmd, param, len, ACX_CMD_TIMEOUT_DEFAULT); ++} ++int acx_s_configure(acx_device_t *adev, void *pdr, int type); ++int acx_s_interrogate(acx_device_t *adev, void *pdr, int type); ++ ++#endif ++ ++void acx_s_cmd_start_scan(acx_device_t *adev); ++ ++ ++/*********************************************************************** ++** Ioctls ++*/ ++int ++acx111pci_ioctl_info( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ struct iw_param *vwrq, ++ char *extra); ++int ++acx100pci_ioctl_set_phy_amp_bias( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ struct iw_param *vwrq, ++ char *extra); ++int ++acx100mem_ioctl_set_phy_amp_bias( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ struct iw_param *vwrq, ++ char *extra); ++ ++ ++/*********************************************************************** ++** /proc ++*/ ++#ifdef CONFIG_PROC_FS ++int acx_proc_register_entries(const struct net_device *ndev); ++int acx_proc_unregister_entries(const struct net_device *ndev); ++#else ++static inline int ++acx_proc_register_entries(const struct net_device *ndev) { return OK; } ++static inline int ++acx_proc_unregister_entries(const struct net_device *ndev) { return OK; } ++#endif ++ ++ ++/*********************************************************************** ++*/ ++firmware_image_t *acx_s_read_fw(struct device *dev, const char *file, u32 *size); ++int acxpci_s_upload_radio(acx_device_t *adev); ++int acxmem_s_upload_radio(acx_device_t *adev); ++ ++ ++/*********************************************************************** ++** Unsorted yet :) ++*/ ++int acxpci_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf); ++int acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf); ++int acxusb_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf); ++static inline int ++acx_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) ++{ ++ if (IS_MEM(adev)) ++ return acxmem_s_read_phy_reg(adev, reg, charbuf); ++ if (IS_PCI(adev)) ++ return acxpci_s_read_phy_reg(adev, reg, charbuf); ++ return acxusb_s_read_phy_reg(adev, reg, charbuf); ++} ++ ++int acxpci_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value); ++int acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value); ++int acxusb_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value); ++static inline int ++acx_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) ++{ ++ if (IS_MEM(adev)) ++ return acxmem_s_write_phy_reg(adev, reg, value); ++ if (IS_PCI(adev)) ++ return acxpci_s_write_phy_reg(adev, reg, value); ++ return acxusb_s_write_phy_reg(adev, reg, value); ++} ++ ++tx_t* acxpci_l_alloc_tx(acx_device_t *adev); ++tx_t* acxmem_l_alloc_tx(acx_device_t *adev); ++tx_t* acxusb_l_alloc_tx(acx_device_t *adev); ++static inline tx_t* ++acx_l_alloc_tx(acx_device_t *adev) ++{ ++ if (IS_MEM(adev)) ++ return acxmem_l_alloc_tx(adev); ++ if (IS_PCI(adev)) ++ return acxpci_l_alloc_tx(adev); ++ return acxusb_l_alloc_tx(adev); ++} ++ ++void acxusb_l_dealloc_tx(tx_t *tx_opaque); ++void acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque); ++static inline void ++acx_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque) ++{ ++#ifdef ACX_MEM ++ acxmem_l_dealloc_tx (adev, tx_opaque); ++#else ++ if (IS_USB(adev)) ++ acxusb_l_dealloc_tx(tx_opaque); ++#endif ++} ++ ++void* acxpci_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque); ++void* acxmem_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque); ++void* acxusb_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque); ++static inline void* ++acx_l_get_txbuf(acx_device_t *adev, tx_t *tx_opaque) ++{ ++#if defined (ACX_MEM) ++ return acxmem_l_get_txbuf(adev, tx_opaque); ++#else ++ if (IS_PCI(adev)) ++ return acxpci_l_get_txbuf(adev, tx_opaque); ++ return acxusb_l_get_txbuf(adev, tx_opaque); ++#endif ++} ++ ++void acxpci_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len); ++void acxmem_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len); ++void acxusb_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len); ++static inline void ++acx_l_tx_data(acx_device_t *adev, tx_t *tx_opaque, int len) ++{ ++#if defined (ACX_MEM) ++ acxmem_l_tx_data(adev, tx_opaque, len); ++#else ++ if (IS_PCI(adev)) ++ acxpci_l_tx_data(adev, tx_opaque, len); ++ else ++ acxusb_l_tx_data(adev, tx_opaque, len); ++#endif ++} ++ ++static inline wlan_hdr_t* ++acx_get_wlan_hdr(acx_device_t *adev, const rxbuffer_t *rxbuf) ++{ ++ return (wlan_hdr_t*)((u8*)&rxbuf->hdr_a3 + adev->phy_header_len); ++} ++ ++void acxpci_l_power_led(acx_device_t *adev, int enable); ++int acxpci_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf); ++unsigned int acxpci_l_clean_txdesc(acx_device_t *adev); ++void acxpci_l_clean_txdesc_emergency(acx_device_t *adev); ++int acxpci_s_create_hostdesc_queues(acx_device_t *adev); ++void acxpci_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start); ++void acxpci_free_desc_queues(acx_device_t *adev); ++char* acxpci_s_proc_diag_output(char *p, acx_device_t *adev); ++int acxpci_proc_eeprom_output(char *p, acx_device_t *adev); ++void acxpci_set_interrupt_mask(acx_device_t *adev); ++int acx100pci_s_set_tx_level(acx_device_t *adev, u8 level_dbm); ++ ++void acxmem_l_power_led(acx_device_t *adev, int enable); ++int acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf); ++unsigned int acxmem_l_clean_txdesc(acx_device_t *adev); ++void acxmem_l_clean_txdesc_emergency(acx_device_t *adev); ++int acxmem_s_create_hostdesc_queues(acx_device_t *adev); ++void acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start); ++void acxmem_free_desc_queues(acx_device_t *adev); ++char* acxmem_s_proc_diag_output(char *p, acx_device_t *adev); ++int acxmem_proc_eeprom_output(char *p, acx_device_t *adev); ++void acxmem_set_interrupt_mask(acx_device_t *adev); ++int acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm); ++ ++void acx_s_msleep(int ms); ++int acx_s_init_mac(acx_device_t *adev); ++void acx_set_reg_domain(acx_device_t *adev, unsigned char reg_dom_id); ++void acx_set_timer(acx_device_t *adev, int timeout_us); ++void acx_update_capabilities(acx_device_t *adev); ++void acx_s_start(acx_device_t *adev); ++ ++void acx_s_update_card_settings(acx_device_t *adev); ++void acx_s_parse_configoption(acx_device_t *adev, const acx111_ie_configoption_t *pcfg); ++void acx_l_update_ratevector(acx_device_t *adev); ++ ++void acx_init_task_scheduler(acx_device_t *adev); ++void acx_schedule_task(acx_device_t *adev, unsigned int set_flag); ++ ++int acx_e_ioctl_old(struct net_device *ndev, struct ifreq *ifr, int cmd); ++ ++client_t *acx_l_sta_list_get(acx_device_t *adev, const u8 *address); ++void acx_l_sta_list_del(acx_device_t *adev, client_t *clt); ++ ++int acx_l_transmit_disassoc(acx_device_t *adev, client_t *clt); ++void acx_i_timer(unsigned long a); ++int acx_s_complete_scan(acx_device_t *adev); ++ ++struct sk_buff *acx_rxbuf_to_ether(acx_device_t *adev, rxbuffer_t *rxbuf); ++int acx_ether_to_txbuf(acx_device_t *adev, void *txbuf, const struct sk_buff *skb); ++ ++u8 acx_signal_determine_quality(u8 signal, u8 noise); ++ ++void acx_l_process_rxbuf(acx_device_t *adev, rxbuffer_t *rxbuf); ++void acx_l_handle_txrate_auto(acx_device_t *adev, struct client *txc, ++ u16 intended_rate, u8 rate100, u16 rate111, u8 error, ++ int pkts_to_ignore); ++ ++void acx_dump_bytes(const void *, int); ++void acx_log_bad_eid(wlan_hdr_t* hdr, int len, wlan_ie_t* ie_ptr); ++ ++u8 acx_rate111to100(u16); ++ ++void acx_s_set_defaults(acx_device_t *adev); ++ ++#if !ACX_DEBUG ++static inline const char* acx_get_packet_type_string(u16 fc) { return ""; } ++#else ++const char* acx_get_packet_type_string(u16 fc); ++#endif ++const char* acx_cmd_status_str(unsigned int state); ++ ++int acx_i_start_xmit(struct sk_buff *skb, struct net_device *ndev); ++ ++void great_inquisitor(acx_device_t *adev); ++ ++void acx_s_get_firmware_version(acx_device_t *adev); ++void acx_display_hardware_details(acx_device_t *adev); ++ ++int acx_e_change_mtu(struct net_device *ndev, int mtu); ++struct net_device_stats* acx_e_get_stats(struct net_device *ndev); ++struct iw_statistics* acx_e_get_wireless_stats(struct net_device *ndev); ++ ++#ifdef ACX_MEM ++int __init acxmem_e_init_module(void); ++void __exit acxmem_e_cleanup_module(void); ++void acxmem_e_release(struct device *dev); ++#else ++int __init acxpci_e_init_module(void); ++int __init acxusb_e_init_module(void); ++void __exit acxpci_e_cleanup_module(void); ++void __exit acxusb_e_cleanup_module(void); ++#endif ++int __init acx_cs_init(void); ++void __exit acx_cs_cleanup(void); +Index: linux-2.6.23/drivers/net/wireless/acx/acx.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/acx.h 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,14 @@ ++#if defined(CONFIG_ACX_MEM) && !defined(ACX_MEM) ++#define ACX_MEM ++#endif ++ ++#if defined(CONFIG_ACX_CS) && !defined(ACX_MEM) ++#define ACX_MEM ++#endif ++ ++#include "acx_config.h" ++#include "wlan_compat.h" ++#include "wlan_hdr.h" ++#include "wlan_mgmt.h" ++#include "acx_struct.h" ++#include "acx_func.h" +Index: linux-2.6.23/drivers/net/wireless/acx/acx_hw.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/acx_hw.h 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,18 @@ ++/* ++ * Interface for ACX slave memory driver ++ * ++ * Copyright (c) 2006 SDG Systems, LLC ++ * ++ * GPL ++ * ++ */ ++ ++#ifndef _ACX_HW_H ++#define _ACX_HW_H ++ ++struct acx_hardware_data { ++ int (*start_hw)( void ); ++ int (*stop_hw)( void ); ++}; ++ ++#endif /* _ACX_HW_H */ +Index: linux-2.6.23/drivers/net/wireless/acx/acx_struct.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/acx_struct.h 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,2114 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++ ++/*********************************************************************** ++** Forward declarations of types ++*/ ++typedef struct tx tx_t; ++typedef struct acx_device acx_device_t; ++typedef struct client client_t; ++typedef struct rxdesc rxdesc_t; ++typedef struct txdesc txdesc_t; ++typedef struct rxhostdesc rxhostdesc_t; ++typedef struct txhostdesc txhostdesc_t; ++ ++ ++/*********************************************************************** ++** Debug / log functionality ++*/ ++enum { ++ L_LOCK = (ACX_DEBUG>1)*0x0001, /* locking debug log */ ++ L_INIT = (ACX_DEBUG>0)*0x0002, /* special card initialization logging */ ++ L_IRQ = (ACX_DEBUG>0)*0x0004, /* interrupt stuff */ ++ L_ASSOC = (ACX_DEBUG>0)*0x0008, /* assocation (network join) and station log */ ++ L_FUNC = (ACX_DEBUG>1)*0x0020, /* logging of function enter / leave */ ++ L_XFER = (ACX_DEBUG>1)*0x0080, /* logging of transfers and mgmt */ ++ L_DATA = (ACX_DEBUG>1)*0x0100, /* logging of transfer data */ ++ L_DEBUG = (ACX_DEBUG>1)*0x0200, /* log of debug info */ ++ L_IOCTL = (ACX_DEBUG>0)*0x0400, /* log ioctl calls */ ++ L_CTL = (ACX_DEBUG>1)*0x0800, /* log of low-level ctl commands */ ++ L_BUFR = (ACX_DEBUG>1)*0x1000, /* debug rx buffer mgmt (ring buffer etc.) */ ++ L_XFER_BEACON = (ACX_DEBUG>1)*0x2000, /* also log beacon packets */ ++ L_BUFT = (ACX_DEBUG>1)*0x4000, /* debug tx buffer mgmt (ring buffer etc.) */ ++ L_USBRXTX = (ACX_DEBUG>0)*0x8000, /* debug USB rx/tx operations */ ++ L_BUF = L_BUFR + L_BUFT, ++ L_ANY = 0xffff ++}; ++ ++#if ACX_DEBUG ++extern unsigned int acx_debug; ++#else ++enum { acx_debug = 0 }; ++#endif ++ ++ ++/*********************************************************************** ++** Random helpers ++*/ ++#define ACX_PACKED __attribute__ ((packed)) ++ ++#define VEC_SIZE(a) (sizeof(a)/sizeof(a[0])) ++ ++/* Use worker_queues for 2.5/2.6 kernels and queue tasks for 2.4 kernels ++ (used for the 'bottom half' of the interrupt routine) */ ++ ++#include ++#define USE_WORKER_TASKS ++#define WORK_STRUCT struct work_struct ++#define SCHEDULE_WORK schedule_work ++#define FLUSH_SCHEDULED_WORK flush_scheduled_work ++ ++ ++/*********************************************************************** ++** Constants ++*/ ++#define OK 0 ++#define NOT_OK 1 ++ ++/* The supported chip models */ ++#define CHIPTYPE_ACX100 1 ++#define CHIPTYPE_ACX111 2 ++ ++#define IS_ACX100(adev) ((adev)->chip_type == CHIPTYPE_ACX100) ++#define IS_ACX111(adev) ((adev)->chip_type == CHIPTYPE_ACX111) ++ ++/* Supported interfaces */ ++#define DEVTYPE_PCI 0 ++#define DEVTYPE_USB 1 ++#define DEVTYPE_MEM 2 ++ ++#if !defined(CONFIG_ACX_PCI) && !defined(CONFIG_ACX_USB) && !defined(CONFIG_ACX_MEM) && !defined(CONFIG_ACX_CS) ++#error Driver must include PCI, USB, PCMCIA or memory mapped interface support. You selected none of them. ++#endif ++ ++#if defined(CONFIG_ACX_PCI) ++ #if !defined(CONFIG_ACX_USB) ++ #define IS_PCI(adev) 1 ++ #else ++ #define IS_PCI(adev) ((adev)->dev_type == DEVTYPE_PCI) ++ #endif ++#else ++ #define IS_PCI(adev) 0 ++#endif ++ ++#if defined(CONFIG_ACX_USB) ++ #if !defined(CONFIG_ACX_PCI) ++ #define IS_USB(adev) 1 ++ #else ++ #define IS_USB(adev) ((adev)->dev_type == DEVTYPE_USB) ++ #endif ++#else ++ #define IS_USB(adev) 0 ++#endif ++ ++#if defined(CONFIG_ACX_MEM) || defined(CONFIG_ACX_CS) ++ #define IS_MEM(adev) 1 ++#else ++ #define IS_MEM(adev) 0 ++#endif ++ ++/* Driver defaults */ ++#define DEFAULT_DTIM_INTERVAL 10 ++/* used to be 2048, but FreeBSD driver changed it to 4096 to work properly ++** in noisy wlans */ ++#define DEFAULT_MSDU_LIFETIME 4096 ++#define DEFAULT_RTS_THRESHOLD 2312 /* max. size: disable RTS mechanism */ ++#define DEFAULT_BEACON_INTERVAL 100 ++ ++#define ACX100_BAP_DATALEN_MAX 4096 ++#define ACX100_RID_GUESSING_MAXLEN 2048 /* I'm not really sure */ ++#define ACX100_RIDDATA_MAXLEN ACX100_RID_GUESSING_MAXLEN ++ ++/* Support Constants */ ++/* Radio type names, found in Win98 driver's TIACXLN.INF */ ++#define RADIO_MAXIM_0D 0x0d ++#define RADIO_RFMD_11 0x11 ++#define RADIO_RALINK_15 0x15 ++/* used in ACX111 cards (WG311v2, WL-121, ...): */ ++#define RADIO_RADIA_16 0x16 ++/* most likely *sometimes* used in ACX111 cards: */ ++#define RADIO_UNKNOWN_17 0x17 ++/* FwRad19.bin was found in a Safecom driver; must be an ACX111 radio: */ ++#define RADIO_UNKNOWN_19 0x19 ++#define RADIO_UNKNOWN_1B 0x1b /* radio in SafeCom SWLUT-54125 USB adapter; entirely unknown!! */ ++ ++/* Controller Commands */ ++/* can be found in table cmdTable in firmware "Rev. 1.5.0" (FW150) */ ++#define ACX1xx_CMD_RESET 0x00 ++#define ACX1xx_CMD_INTERROGATE 0x01 ++#define ACX1xx_CMD_CONFIGURE 0x02 ++#define ACX1xx_CMD_ENABLE_RX 0x03 ++#define ACX1xx_CMD_ENABLE_TX 0x04 ++#define ACX1xx_CMD_DISABLE_RX 0x05 ++#define ACX1xx_CMD_DISABLE_TX 0x06 ++#define ACX1xx_CMD_FLUSH_QUEUE 0x07 ++#define ACX1xx_CMD_SCAN 0x08 ++#define ACX1xx_CMD_STOP_SCAN 0x09 ++#define ACX1xx_CMD_CONFIG_TIM 0x0a ++#define ACX1xx_CMD_JOIN 0x0b ++#define ACX1xx_CMD_WEP_MGMT 0x0c ++#ifdef OLD_FIRMWARE_VERSIONS ++#define ACX100_CMD_HALT 0x0e /* mapped to unknownCMD in FW150 */ ++#else ++#define ACX1xx_CMD_MEM_READ 0x0d ++#define ACX1xx_CMD_MEM_WRITE 0x0e ++#endif ++#define ACX1xx_CMD_SLEEP 0x0f ++#define ACX1xx_CMD_WAKE 0x10 ++#define ACX1xx_CMD_UNKNOWN_11 0x11 /* mapped to unknownCMD in FW150 */ ++#define ACX100_CMD_INIT_MEMORY 0x12 ++#define ACX1FF_CMD_DISABLE_RADIO 0x12 /* new firmware? TNETW1450? */ ++#define ACX1xx_CMD_CONFIG_BEACON 0x13 ++#define ACX1xx_CMD_CONFIG_PROBE_RESPONSE 0x14 ++#define ACX1xx_CMD_CONFIG_NULL_DATA 0x15 ++#define ACX1xx_CMD_CONFIG_PROBE_REQUEST 0x16 ++#define ACX1xx_CMD_FCC_TEST 0x17 ++#define ACX1xx_CMD_RADIOINIT 0x18 ++#define ACX111_CMD_RADIOCALIB 0x19 ++#define ACX1FF_CMD_NOISE_HISTOGRAM 0x1c /* new firmware? TNETW1450? */ ++#define ACX1FF_CMD_RX_RESET 0x1d /* new firmware? TNETW1450? */ ++#define ACX1FF_CMD_LNA_CONTROL 0x20 /* new firmware? TNETW1450? */ ++#define ACX1FF_CMD_CONTROL_DBG_TRACE 0x21 /* new firmware? TNETW1450? */ ++ ++/* 'After Interrupt' Commands */ ++#define ACX_AFTER_IRQ_CMD_STOP_SCAN 0x01 ++#define ACX_AFTER_IRQ_CMD_ASSOCIATE 0x02 ++#define ACX_AFTER_IRQ_CMD_RADIO_RECALIB 0x04 ++#define ACX_AFTER_IRQ_UPDATE_CARD_CFG 0x08 ++#define ACX_AFTER_IRQ_TX_CLEANUP 0x10 ++#define ACX_AFTER_IRQ_COMPLETE_SCAN 0x20 ++#define ACX_AFTER_IRQ_RESTART_SCAN 0x40 ++ ++/*********************************************************************** ++** Tx/Rx buffer sizes and watermarks ++** ++** This will alloc and use DMAable buffers of ++** WLAN_A4FR_MAXLEN_WEP_FCS * (RX_CNT + TX_CNT) bytes ++** RX/TX_CNT=32 -> ~150k DMA buffers ++** RX/TX_CNT=16 -> ~75k DMA buffers ++** ++** 2005-10-10: reduced memory usage by lowering both to 16 ++*/ ++#define RX_CNT 16 ++#define TX_CNT 16 ++ ++/* we clean up txdescs when we have N free txdesc: */ ++#define TX_CLEAN_BACKLOG (TX_CNT/4) ++#define TX_START_CLEAN (TX_CNT - TX_CLEAN_BACKLOG) ++#define TX_EMERG_CLEAN 2 ++/* we stop queue if we have < N free txbufs: */ ++#define TX_STOP_QUEUE 3 ++/* we start queue if we have >= N free txbufs: */ ++#define TX_START_QUEUE 5 ++ ++/*********************************************************************** ++** Interrogate/Configure cmd constants ++** ++** NB: length includes JUST the data part of the IE ++** (does not include size of the (type,len) pair) ++** ++** TODO: seems that acx100, acx100usb, acx111 have some differences, ++** fix code with regard to this! ++*/ ++ ++#define DEF_IE(name, val, len) enum { ACX##name=val, ACX##name##_LEN=len } ++ ++/* Information Elements: Network Parameters, Static Configuration Entities */ ++/* these are handled by real_cfgtable in firmware "Rev 1.5.0" (FW150) */ ++DEF_IE(1xx_IE_UNKNOWN_00 ,0x0000, -1); /* mapped to cfgInvalid in FW150 */ ++DEF_IE(100_IE_ACX_TIMER ,0x0001, 0x10); ++DEF_IE(1xx_IE_POWER_MGMT ,0x0002, 0x06); /* TNETW1450: length 0x18!! */ ++DEF_IE(1xx_IE_QUEUE_CONFIG ,0x0003, 0x1c); ++DEF_IE(100_IE_BLOCK_SIZE ,0x0004, 0x02); ++DEF_IE(1FF_IE_SLOT_TIME ,0x0004, 0x08); /* later firmware versions only? */ ++DEF_IE(1xx_IE_MEMORY_CONFIG_OPTIONS ,0x0005, 0x14); ++DEF_IE(1FF_IE_QUEUE_HEAD ,0x0005, 0x14 /* FIXME: length? */); ++DEF_IE(1xx_IE_RATE_FALLBACK ,0x0006, 0x01); /* TNETW1450: length 2 */ ++DEF_IE(100_IE_WEP_OPTIONS ,0x0007, 0x03); ++DEF_IE(111_IE_RADIO_BAND ,0x0007, -1); ++DEF_IE(1FF_IE_TIMING_CFG ,0x0007, -1); /* later firmware versions; TNETW1450 only? */ ++DEF_IE(100_IE_SSID ,0x0008, 0x20); /* huh? */ ++DEF_IE(1xx_IE_MEMORY_MAP ,0x0008, 0x28); /* huh? TNETW1450 has length 0x40!! */ ++DEF_IE(1xx_IE_SCAN_STATUS ,0x0009, 0x04); /* mapped to cfgInvalid in FW150 */ ++DEF_IE(1xx_IE_ASSOC_ID ,0x000a, 0x02); ++DEF_IE(1xx_IE_UNKNOWN_0B ,0x000b, -1); /* mapped to cfgInvalid in FW150 */ ++DEF_IE(1FF_IE_TX_POWER_LEVEL_TABLE ,0x000b, 0x18); /* later firmware versions; TNETW1450 only? */ ++DEF_IE(100_IE_UNKNOWN_0C ,0x000c, -1); /* very small implementation in FW150! */ ++/* ACX100 has an equivalent struct in the cmd mailbox directly after reset. ++ * 0x14c seems extremely large, will trash stack on failure (memset!) ++ * in case of small input struct --> OOPS! */ ++DEF_IE(111_IE_CONFIG_OPTIONS ,0x000c, 0x14c); ++DEF_IE(1xx_IE_FWREV ,0x000d, 0x18); ++DEF_IE(1xx_IE_FCS_ERROR_COUNT ,0x000e, 0x04); ++DEF_IE(1xx_IE_MEDIUM_USAGE ,0x000f, 0x08); ++DEF_IE(1xx_IE_RXCONFIG ,0x0010, 0x04); ++DEF_IE(100_IE_UNKNOWN_11 ,0x0011, -1); /* NONBINARY: large implementation in FW150! link quality readings or so? */ ++DEF_IE(111_IE_QUEUE_THRESH ,0x0011, -1); ++DEF_IE(100_IE_UNKNOWN_12 ,0x0012, -1); /* NONBINARY: VERY large implementation in FW150!! */ ++DEF_IE(111_IE_BSS_POWER_SAVE ,0x0012, /* -1 */ 2); ++DEF_IE(1xx_IE_FIRMWARE_STATISTICS ,0x0013, 0x9c); /* TNETW1450: length 0x134!! */ ++DEF_IE(1FF_IE_RX_INTR_CONFIG ,0x0014, 0x14); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1xx_IE_FEATURE_CONFIG ,0x0015, 0x08); ++DEF_IE(111_IE_KEY_CHOOSE ,0x0016, 0x04); /* for rekeying. really len=4?? */ ++DEF_IE(1FF_IE_MISC_CONFIG_TABLE ,0x0017, 0x04); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_WONE_CONFIG ,0x0018, -1); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_TID_CONFIG ,0x001a, 0x2c); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_CALIB_ASSESSMENT ,0x001e, 0x04); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_BEACON_FILTER_OPTIONS ,0x001f, 0x02); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_LOW_RSSI_THRESH_OPT ,0x0020, 0x04); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_NOISE_HISTOGRAM_RESULTS ,0x0021, 0x30); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_PACKET_DETECT_THRESH ,0x0023, 0x04); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_TX_CONFIG_OPTIONS ,0x0024, 0x04); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_CCA_THRESHOLD ,0x0025, 0x02); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_EVENT_MASK ,0x0026, 0x08); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_DTIM_PERIOD ,0x0027, 0x02); /* later firmware versions, TNETW1450 only? */ ++DEF_IE(1FF_IE_ACI_CONFIG_SET ,0x0029, 0x06); /* later firmware versions; maybe TNETW1450 only? */ ++DEF_IE(1FF_IE_EEPROM_VER ,0x0030, 0x04); /* later firmware versions; maybe TNETW1450 only? */ ++DEF_IE(1xx_IE_DOT11_STATION_ID ,0x1001, 0x06); ++DEF_IE(100_IE_DOT11_UNKNOWN_1002 ,0x1002, -1); /* mapped to cfgInvalid in FW150 */ ++DEF_IE(111_IE_DOT11_FRAG_THRESH ,0x1002, -1); /* mapped to cfgInvalid in FW150; TNETW1450 has length 2!! */ ++DEF_IE(100_IE_DOT11_BEACON_PERIOD ,0x1003, 0x02); /* mapped to cfgInvalid in FW150 */ ++DEF_IE(1xx_IE_DOT11_DTIM_PERIOD ,0x1004, -1); /* mapped to cfgInvalid in FW150 */ ++DEF_IE(1FF_IE_DOT11_MAX_RX_LIFETIME ,0x1004, -1); /* later firmware versions; maybe TNETW1450 only? */ ++DEF_IE(1xx_IE_DOT11_SHORT_RETRY_LIMIT ,0x1005, 0x01); /* TNETW1450: length 2 */ ++DEF_IE(1xx_IE_DOT11_LONG_RETRY_LIMIT ,0x1006, 0x01); /* TNETW1450: length 2 */ ++DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_WRITE ,0x1007, 0x20); /* configure default keys; TNETW1450 has length 0x24!! */ ++DEF_IE(1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME ,0x1008, 0x04); ++DEF_IE(1xx_IE_DOT11_GROUP_ADDR ,0x1009, -1); ++DEF_IE(1xx_IE_DOT11_CURRENT_REG_DOMAIN ,0x100a, 0x02); ++/* It's harmless to have larger struct. Use USB case always. */ ++DEF_IE(1xx_IE_DOT11_CURRENT_ANTENNA ,0x100b, 0x02); /* in fact len=1 for PCI */ ++DEF_IE(1xx_IE_DOT11_UNKNOWN_100C ,0x100c, -1); /* mapped to cfgInvalid in FW150 */ ++DEF_IE(1xx_IE_DOT11_TX_POWER_LEVEL ,0x100d, 0x01); /* TNETW1450 has length 2!! */ ++DEF_IE(1xx_IE_DOT11_CURRENT_CCA_MODE ,0x100e, 0x02); /* in fact len=1 for PCI */ ++/* USB doesn't return anything - len==0?! */ ++DEF_IE(100_IE_DOT11_ED_THRESHOLD ,0x100f, 0x04); ++DEF_IE(1xx_IE_DOT11_WEP_DEFAULT_KEY_SET ,0x1010, 0x01); /* set default key ID; TNETW1450: length 2 */ ++DEF_IE(100_IE_DOT11_UNKNOWN_1011 ,0x1011, -1); /* mapped to cfgInvalid in FW150 */ ++DEF_IE(1FF_IE_DOT11_CURR_5GHZ_REGDOM ,0x1011, -1); /* later firmware versions; maybe TNETW1450 only? */ ++DEF_IE(100_IE_DOT11_UNKNOWN_1012 ,0x1012, -1); /* mapped to cfgInvalid in FW150 */ ++DEF_IE(100_IE_DOT11_UNKNOWN_1013 ,0x1013, -1); /* mapped to cfgInvalid in FW150 */ ++ ++#if 0 ++/* Experimentally obtained on acx100, fw 1.9.8.b ++** -1 means that fw returned 'invalid IE' ++** 0200 FC00 nnnn... are test read contents: u16 type, u16 len, data ++** (AA are poison bytes marking bytes not written by fw) ++** ++** Looks like acx100 fw does not update len field (thus len=256-4=FC here) ++** A number of IEs seem to trash type,len fields ++** IEs marked 'huge' return gobs of data (no poison bytes remain) ++*/ ++DEF_IE(100_IE_INVAL_00, 0x0000, -1); ++DEF_IE(100_IE_INVAL_01, 0x0001, -1); /* IE_ACX_TIMER, len=16 on older fw */ ++DEF_IE(100_IE_POWER_MGMT, 0x0002, 4); /* 0200FC00 00040000 AAAAAAAA */ ++DEF_IE(100_IE_QUEUE_CONFIG, 0x0003, 28); /* 0300FC00 48060000 9CAD0000 0101AAAA DCB00000 E4B00000 9CAA0000 00AAAAAA */ ++DEF_IE(100_IE_BLOCK_SIZE, 0x0004, 2); /* 0400FC00 0001AAAA AAAAAAAA AAAAAAAA */ ++/* write only: */ ++DEF_IE(100_IE_MEMORY_CONFIG_OPTIONS, 0x0005, 20); ++DEF_IE(100_IE_RATE_FALLBACK, 0x0006, 1); /* 0600FC00 00AAAAAA AAAAAAAA AAAAAAAA */ ++/* write only: */ ++DEF_IE(100_IE_WEP_OPTIONS, 0x0007, 3); ++DEF_IE(100_IE_MEMORY_MAP, 0x0008, 40); /* huge: 0800FC00 30000000 6CA20000 70A20000... */ ++/* gives INVAL on read: */ ++DEF_IE(100_IE_SCAN_STATUS, 0x0009, -1); ++DEF_IE(100_IE_ASSOC_ID, 0x000a, 2); /* huge: 0A00FC00 00000000 01040800 00000000... */ ++DEF_IE(100_IE_INVAL_0B, 0x000b, -1); ++/* 'command rejected': */ ++DEF_IE(100_IE_CONFIG_OPTIONS, 0x000c, -3); ++DEF_IE(100_IE_FWREV, 0x000d, 24); /* 0D00FC00 52657620 312E392E 382E6200 AAAAAAAA AAAAAAAA 05050201 AAAAAAAA */ ++DEF_IE(100_IE_FCS_ERROR_COUNT, 0x000e, 4); ++DEF_IE(100_IE_MEDIUM_USAGE, 0x000f, 8); /* E41F0000 2D780300 FCC91300 AAAAAAAA */ ++DEF_IE(100_IE_RXCONFIG, 0x0010, 4); /* 1000FC00 00280000 AAAAAAAA AAAAAAAA */ ++DEF_IE(100_IE_QUEUE_THRESH, 0x0011, 12); /* 1100FC00 AAAAAAAA 00000000 00000000 */ ++DEF_IE(100_IE_BSS_POWER_SAVE, 0x0012, 1); /* 1200FC00 00AAAAAA AAAAAAAA AAAAAAAA */ ++/* read only, variable len */ ++DEF_IE(100_IE_FIRMWARE_STATISTICS, 0x0013, 256); /* 0000AC00 00000000 ... */ ++DEF_IE(100_IE_INT_CONFIG, 0x0014, 20); /* 00000000 00000000 00000000 00000000 5D74D105 00000000 AAAAAAAA AAAAAAAA */ ++DEF_IE(100_IE_FEATURE_CONFIG, 0x0015, 8); /* 1500FC00 16000000 AAAAAAAA AAAAAAAA */ ++/* returns 'invalid MAC': */ ++DEF_IE(100_IE_KEY_CHOOSE, 0x0016, -4); ++DEF_IE(100_IE_INVAL_17, 0x0017, -1); ++DEF_IE(100_IE_UNKNOWN_18, 0x0018, 0); /* null len?! 1800FC00 AAAAAAAA AAAAAAAA AAAAAAAA */ ++DEF_IE(100_IE_UNKNOWN_19, 0x0019, 256); /* huge: 1900FC00 9C1F00EA FEFFFFEA FEFFFFEA... */ ++DEF_IE(100_IE_INVAL_1A, 0x001A, -1); ++ ++DEF_IE(100_IE_DOT11_INVAL_1000, 0x1000, -1); ++DEF_IE(100_IE_DOT11_STATION_ID, 0x1001, 6); /* huge: 0110FC00 58B10E2F 03000000 00000000... */ ++DEF_IE(100_IE_DOT11_INVAL_1002, 0x1002, -1); ++DEF_IE(100_IE_DOT11_INVAL_1003, 0x1003, -1); ++DEF_IE(100_IE_DOT11_INVAL_1004, 0x1004, -1); ++DEF_IE(100_IE_DOT11_SHORT_RETRY_LIMIT, 0x1005, 1); ++DEF_IE(100_IE_DOT11_LONG_RETRY_LIMIT, 0x1006, 1); ++/* write only: */ ++DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_WRITE, 0x1007, 32); ++DEF_IE(100_IE_DOT11_MAX_XMIT_MSDU_LIFETIME, 0x1008, 4); /* huge: 0810FC00 00020000 F4010000 00000000... */ ++/* undoc but returns something */ ++DEF_IE(100_IE_DOT11_GROUP_ADDR, 0x1009, 12); /* huge: 0910FC00 00000000 00000000 00000000... */ ++DEF_IE(100_IE_DOT11_CURRENT_REG_DOMAIN, 0x100a, 1); /* 0A10FC00 30AAAAAA AAAAAAAA AAAAAAAA */ ++DEF_IE(100_IE_DOT11_CURRENT_ANTENNA, 0x100b, 1); /* 0B10FC00 8FAAAAAA AAAAAAAA AAAAAAAA */ ++DEF_IE(100_IE_DOT11_INVAL_100C, 0x100c, -1); ++DEF_IE(100_IE_DOT11_TX_POWER_LEVEL, 0x100d, 2); /* 00000000 0100AAAA AAAAAAAA AAAAAAAA */ ++DEF_IE(100_IE_DOT11_CURRENT_CCA_MODE, 0x100e, 1); /* 0E10FC00 0DAAAAAA AAAAAAAA AAAAAAAA */ ++DEF_IE(100_IE_DOT11_ED_THRESHOLD, 0x100f, 4); /* 0F10FC00 70000000 AAAAAAAA AAAAAAAA */ ++/* set default key ID */ ++DEF_IE(100_IE_DOT11_WEP_DEFAULT_KEY_SET, 0x1010, 1); /* 1010FC00 00AAAAAA AAAAAAAA AAAAAAAA */ ++DEF_IE(100_IE_DOT11_INVAL_1011, 0x1011, -1); ++DEF_IE(100_IE_DOT11_INVAL_1012, 0x1012, -1); ++DEF_IE(100_IE_DOT11_INVAL_1013, 0x1013, -1); ++DEF_IE(100_IE_DOT11_UNKNOWN_1014, 0x1014, 256); /* huge */ ++DEF_IE(100_IE_DOT11_UNKNOWN_1015, 0x1015, 256); /* huge */ ++DEF_IE(100_IE_DOT11_UNKNOWN_1016, 0x1016, 256); /* huge */ ++DEF_IE(100_IE_DOT11_UNKNOWN_1017, 0x1017, 256); /* huge */ ++DEF_IE(100_IE_DOT11_UNKNOWN_1018, 0x1018, 256); /* huge */ ++DEF_IE(100_IE_DOT11_UNKNOWN_1019, 0x1019, 256); /* huge */ ++#endif ++ ++#if 0 ++/* Experimentally obtained on PCI acx111 Xterasys XN-2522g, fw 1.2.1.34 ++** -1 means that fw returned 'invalid IE' ++** 0400 0800 nnnn... are test read contents: u16 type, u16 len, data ++** (AA are poison bytes marking bytes not written by fw) ++** ++** Looks like acx111 fw reports real len! ++*/ ++DEF_IE(111_IE_INVAL_00, 0x0000, -1); ++DEF_IE(111_IE_INVAL_01, 0x0001, -1); ++DEF_IE(111_IE_POWER_MGMT, 0x0002, 12); ++/* write only, variable len: 12 + rxqueue_cnt*8 + txqueue_cnt*4: */ ++DEF_IE(111_IE_MEMORY_CONFIG, 0x0003, 24); ++DEF_IE(111_IE_BLOCK_SIZE, 0x0004, 8); /* 04000800 AA00AAAA AAAAAAAA */ ++/* variable len: 8 + rxqueue_cnt*8 + txqueue_cnt*8: */ ++DEF_IE(111_IE_QUEUE_HEAD, 0x0005, 24); ++DEF_IE(111_IE_RATE_FALLBACK, 0x0006, 1); ++/* acx100 name:WEP_OPTIONS */ ++/* said to have len:1 (not true, actually returns 12 bytes): */ ++DEF_IE(111_IE_RADIO_BAND, 0x0007, 12); /* 07000C00 AAAA1F00 FF03AAAA AAAAAAAA */ ++DEF_IE(111_IE_MEMORY_MAP, 0x0008, 48); ++/* said to have len:4, but gives INVAL on read: */ ++DEF_IE(111_IE_SCAN_STATUS, 0x0009, -1); ++DEF_IE(111_IE_ASSOC_ID, 0x000a, 2); ++/* write only, len is not known: */ ++DEF_IE(111_IE_UNKNOWN_0B, 0x000b, 0); ++/* read only, variable len. I see 67 byte reads: */ ++DEF_IE(111_IE_CONFIG_OPTIONS, 0x000c, 67); /* 0C004300 01160500 ... */ ++DEF_IE(111_IE_FWREV, 0x000d, 24); ++DEF_IE(111_IE_FCS_ERROR_COUNT, 0x000e, 4); ++DEF_IE(111_IE_MEDIUM_USAGE, 0x000f, 8); ++DEF_IE(111_IE_RXCONFIG, 0x0010, 4); ++DEF_IE(111_IE_QUEUE_THRESH, 0x0011, 12); ++DEF_IE(111_IE_BSS_POWER_SAVE, 0x0012, 1); ++/* read only, variable len. I see 240 byte reads: */ ++DEF_IE(111_IE_FIRMWARE_STATISTICS, 0x0013, 240); /* 1300F000 00000000 ... */ ++/* said to have len=17. looks like fw pads it to 20: */ ++DEF_IE(111_IE_INT_CONFIG, 0x0014, 20); /* 14001400 00000000 00000000 00000000 00000000 00000000 */ ++DEF_IE(111_IE_FEATURE_CONFIG, 0x0015, 8); ++/* said to be name:KEY_INDICATOR, len:4, but gives INVAL on read: */ ++DEF_IE(111_IE_KEY_CHOOSE, 0x0016, -1); ++/* said to have len:4, but in fact returns 8: */ ++DEF_IE(111_IE_MAX_USB_XFR, 0x0017, 8); /* 17000800 00014000 00000000 */ ++DEF_IE(111_IE_INVAL_18, 0x0018, -1); ++DEF_IE(111_IE_INVAL_19, 0x0019, -1); ++/* undoc but returns something: */ ++/* huh, fw indicates len=20 but uses 4 more bytes in buffer??? */ ++DEF_IE(111_IE_UNKNOWN_1A, 0x001A, 20); /* 1A001400 AA00AAAA 0000020F FF030000 00020000 00000007 04000000 */ ++ ++DEF_IE(111_IE_DOT11_INVAL_1000, 0x1000, -1); ++DEF_IE(111_IE_DOT11_STATION_ID, 0x1001, 6); ++DEF_IE(111_IE_DOT11_FRAG_THRESH, 0x1002, 2); ++/* acx100 only? gives INVAL on read: */ ++DEF_IE(111_IE_DOT11_BEACON_PERIOD, 0x1003, -1); ++/* said to be MAX_RECV_MSDU_LIFETIME: */ ++DEF_IE(111_IE_DOT11_DTIM_PERIOD, 0x1004, 4); ++DEF_IE(111_IE_DOT11_SHORT_RETRY_LIMIT, 0x1005, 1); ++DEF_IE(111_IE_DOT11_LONG_RETRY_LIMIT, 0x1006, 1); ++/* acx100 only? gives INVAL on read: */ ++DEF_IE(111_IE_DOT11_WEP_DEFAULT_KEY_WRITE, 0x1007, -1); ++DEF_IE(111_IE_DOT11_MAX_XMIT_MSDU_LIFETIME, 0x1008, 4); ++/* undoc but returns something. maybe it's 2 multicast MACs to listen to? */ ++DEF_IE(111_IE_DOT11_GROUP_ADDR, 0x1009, 12); /* 09100C00 00000000 00000000 00000000 */ ++DEF_IE(111_IE_DOT11_CURRENT_REG_DOMAIN, 0x100a, 1); ++DEF_IE(111_IE_DOT11_CURRENT_ANTENNA, 0x100b, 2); ++DEF_IE(111_IE_DOT11_INVAL_100C, 0x100c, -1); ++DEF_IE(111_IE_DOT11_TX_POWER_LEVEL, 0x100d, 1); ++/* said to have len=1 but gives INVAL on read: */ ++DEF_IE(111_IE_DOT11_CURRENT_CCA_MODE, 0x100e, -1); ++/* said to have len=4 but gives INVAL on read: */ ++DEF_IE(111_IE_DOT11_ED_THRESHOLD, 0x100f, -1); ++/* set default key ID. write only: */ ++DEF_IE(111_IE_DOT11_WEP_DEFAULT_KEY_SET, 0x1010, 1); ++/* undoc but returns something: */ ++DEF_IE(111_IE_DOT11_UNKNOWN_1011, 0x1011, 1); /* 11100100 20 */ ++DEF_IE(111_IE_DOT11_INVAL_1012, 0x1012, -1); ++DEF_IE(111_IE_DOT11_INVAL_1013, 0x1013, -1); ++#endif ++ ++ ++/*********************************************************************** ++**Information Frames Structures ++*/ ++ ++/* Used in beacon frames and the like */ ++#define DOT11RATEBYTE_1 (1*2) ++#define DOT11RATEBYTE_2 (2*2) ++#define DOT11RATEBYTE_5_5 (5*2+1) ++#define DOT11RATEBYTE_11 (11*2) ++#define DOT11RATEBYTE_22 (22*2) ++#define DOT11RATEBYTE_6_G (6*2) ++#define DOT11RATEBYTE_9_G (9*2) ++#define DOT11RATEBYTE_12_G (12*2) ++#define DOT11RATEBYTE_18_G (18*2) ++#define DOT11RATEBYTE_24_G (24*2) ++#define DOT11RATEBYTE_36_G (36*2) ++#define DOT11RATEBYTE_48_G (48*2) ++#define DOT11RATEBYTE_54_G (54*2) ++#define DOT11RATEBYTE_BASIC 0x80 /* flags rates included in basic rate set */ ++ ++ ++/*********************************************************************** ++** rxbuffer_t ++** ++** This is the format of rx data returned by acx ++*/ ++ ++/* I've hoped it's a 802.11 PHY header, but no... ++ * so far, I've seen on acx111: ++ * 0000 3a00 0000 0000 IBSS Beacons ++ * 0000 3c00 0000 0000 ESS Beacons ++ * 0000 2700 0000 0000 Probe requests ++ * --vda ++ */ ++typedef struct phy_hdr { ++ u8 unknown[4]; ++ u8 acx111_unknown[4]; ++} ACX_PACKED phy_hdr_t; ++ ++/* seems to be a bit similar to hfa384x_rx_frame. ++ * These fields are still not quite obvious, though. ++ * Some seem to have different meanings... */ ++ ++#define RXBUF_HDRSIZE 12 ++#define RXBUF_BYTES_RCVD(adev, rxbuf) \ ++ ((le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0xfff) - (adev)->phy_header_len) ++#define RXBUF_BYTES_USED(rxbuf) \ ++ ((le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0xfff) + RXBUF_HDRSIZE) ++/* USBism */ ++#define RXBUF_IS_TXSTAT(rxbuf) (le16_to_cpu((rxbuf)->mac_cnt_rcvd) & 0x8000) ++/* ++mac_cnt_rcvd: ++ 12 bits: length of frame from control field to first byte of FCS ++ 3 bits: reserved ++ 1 bit: 1 = it's a tx status info, not a rx packet (USB only) ++ ++mac_cnt_mblks: ++ 6 bits: number of memory block used to store frame in adapter memory ++ 1 bit: Traffic Indicator bit in TIM of received Beacon was set ++ ++mac_status: 1 byte (bitmap): ++ 7 Matching BSSID ++ 6 Matching SSID ++ 5 BDCST Address 1 field is a broadcast ++ 4 VBM received beacon frame has more than one set bit (?!) ++ 3 TIM Set bit representing this station is set in TIM of received beacon ++ 2 GROUP Address 1 is a multicast ++ 1 ADDR1 Address 1 matches our MAC ++ 0 FCSGD FSC is good ++ ++phy_stat_baseband: 1 byte (bitmap): ++ 7 Preamble frame had a long preamble ++ 6 PLCP Error CRC16 error in PLCP header ++ 5 Unsup_Mod unsupported modulation ++ 4 Selected Antenna antenna 1 was used to receive this frame ++ 3 PBCC/CCK frame used: 1=PBCC, 0=CCK modulation ++ 2 OFDM frame used OFDM modulation ++ 1 TI Protection protection frame was detected ++ 0 Reserved ++ ++phy_plcp_signal: 1 byte: ++ Receive PLCP Signal field from the Baseband Processor ++ ++phy_level: 1 byte: ++ receive AGC gain level (can be used to measure receive signal strength) ++ ++phy_snr: 1 byte: ++ estimated noise power of equalized receive signal ++ at input of FEC decoder (can be used to measure receive signal quality) ++ ++time: 4 bytes: ++ timestamp sampled from either the Access Manager TSF counter ++ or free-running microsecond counter when the MAC receives ++ first byte of PLCP header. ++*/ ++ ++typedef struct rxbuffer { ++ u16 mac_cnt_rcvd; /* only 12 bits are len! (0xfff) */ ++ u8 mac_cnt_mblks; ++ u8 mac_status; ++ u8 phy_stat_baseband; /* bit 0x80: used LNA (Low-Noise Amplifier) */ ++ u8 phy_plcp_signal; ++ u8 phy_level; /* PHY stat */ ++ u8 phy_snr; /* PHY stat */ ++ u32 time; /* timestamp upon MAC rcv first byte */ ++/* 4-byte (acx100) or 8-byte (acx111) phy header will be here ++** if RX_CFG1_INCLUDE_PHY_HDR is in effect: ++** phy_hdr_t phy */ ++ wlan_hdr_a3_t hdr_a3; ++ /* maximally sized data part of wlan packet */ ++ u8 data_a3[WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN]; ++ /* can add hdr/data_a4 if needed */ ++} ACX_PACKED rxbuffer_t; ++ ++ ++/*--- Firmware statistics ----------------------------------------------------*/ ++ ++/* define a random 100 bytes more to catch firmware versions which ++ * provide a bigger struct */ ++#define FW_STATS_FUTURE_EXTENSION 100 ++ ++typedef struct fw_stats_tx { ++ u32 tx_desc_of; ++} ACX_PACKED fw_stats_tx_t; ++ ++typedef struct fw_stats_rx { ++ u32 rx_oom; ++ u32 rx_hdr_of; ++ u32 rx_hw_stuck; /* old: u32 rx_hdr_use_next */ ++ u32 rx_dropped_frame; ++ u32 rx_frame_ptr_err; ++ u32 rx_xfr_hint_trig; ++ u32 rx_aci_events; /* later versions only */ ++ u32 rx_aci_resets; /* later versions only */ ++} ACX_PACKED fw_stats_rx_t; ++ ++typedef struct fw_stats_dma { ++ u32 rx_dma_req; ++ u32 rx_dma_err; ++ u32 tx_dma_req; ++ u32 tx_dma_err; ++} ACX_PACKED fw_stats_dma_t; ++ ++typedef struct fw_stats_irq { ++ u32 cmd_cplt; ++ u32 fiq; ++ u32 rx_hdrs; ++ u32 rx_cmplt; ++ u32 rx_mem_of; ++ u32 rx_rdys; ++ u32 irqs; ++ u32 tx_procs; ++ u32 decrypt_done; ++ u32 dma_0_done; ++ u32 dma_1_done; ++ u32 tx_exch_complet; ++ u32 commands; ++ u32 rx_procs; ++ u32 hw_pm_mode_changes; ++ u32 host_acks; ++ u32 pci_pm; ++ u32 acm_wakeups; ++} ACX_PACKED fw_stats_irq_t; ++ ++typedef struct fw_stats_wep { ++ u32 wep_key_count; ++ u32 wep_default_key_count; ++ u32 dot11_def_key_mib; ++ u32 wep_key_not_found; ++ u32 wep_decrypt_fail; ++ u32 wep_pkt_decrypt; ++ u32 wep_decrypt_irqs; ++} ACX_PACKED fw_stats_wep_t; ++ ++typedef struct fw_stats_pwr { ++ u32 tx_start_ctr; ++ u32 no_ps_tx_too_short; ++ u32 rx_start_ctr; ++ u32 no_ps_rx_too_short; ++ u32 lppd_started; ++ u32 no_lppd_too_noisy; ++ u32 no_lppd_too_short; ++ u32 no_lppd_matching_frame; ++} ACX_PACKED fw_stats_pwr_t; ++ ++typedef struct fw_stats_mic { ++ u32 mic_rx_pkts; ++ u32 mic_calc_fail; ++} ACX_PACKED fw_stats_mic_t; ++ ++typedef struct fw_stats_aes { ++ u32 aes_enc_fail; ++ u32 aes_dec_fail; ++ u32 aes_enc_pkts; ++ u32 aes_dec_pkts; ++ u32 aes_enc_irq; ++ u32 aes_dec_irq; ++} ACX_PACKED fw_stats_aes_t; ++ ++typedef struct fw_stats_event { ++ u32 heartbeat; ++ u32 calibration; ++ u32 rx_mismatch; ++ u32 rx_mem_empty; ++ u32 rx_pool; ++ u32 oom_late; ++ u32 phy_tx_err; ++ u32 tx_stuck; ++} ACX_PACKED fw_stats_event_t; ++ ++/* mainly for size calculation only */ ++typedef struct fw_stats { ++ u16 type; ++ u16 len; ++ fw_stats_tx_t tx; ++ fw_stats_rx_t rx; ++ fw_stats_dma_t dma; ++ fw_stats_irq_t irq; ++ fw_stats_wep_t wep; ++ fw_stats_pwr_t pwr; ++ fw_stats_mic_t mic; ++ fw_stats_aes_t aes; ++ fw_stats_event_t evt; ++ u8 _padding[FW_STATS_FUTURE_EXTENSION]; ++} fw_stats_t; ++ ++/* Firmware version struct */ ++ ++typedef struct fw_ver { ++ u16 cmd; ++ u16 size; ++ char fw_id[20]; ++ u32 hw_id; ++} ACX_PACKED fw_ver_t; ++ ++#define FW_ID_SIZE 20 ++ ++typedef struct shared_queueindicator { ++ u32 indicator; ++ u16 host_lock; ++ u16 fw_lock; ++} ACX_PACKED queueindicator_t; ++ ++/*--- WEP stuff --------------------------------------------------------------*/ ++#define DOT11_MAX_DEFAULT_WEP_KEYS 4 ++ ++/* non-firmware struct, no packing necessary */ ++typedef struct wep_key { ++ size_t size; /* most often used member first */ ++ u8 index; ++ u8 key[29]; ++ u16 strange_filler; ++} wep_key_t; /* size = 264 bytes (33*8) */ ++/* FIXME: We don't have size 264! Or is there 2 bytes beyond the key ++ * (strange_filler)? */ ++ ++/* non-firmware struct, no packing necessary */ ++typedef struct key_struct { ++ u8 addr[ETH_ALEN]; /* 0x00 */ ++ u16 filler1; /* 0x06 */ ++ u32 filler2; /* 0x08 */ ++ u32 index; /* 0x0c */ ++ u16 len; /* 0x10 */ ++ u8 key[29]; /* 0x12; is this long enough??? */ ++} key_struct_t; /* size = 276. FIXME: where is the remaining space?? */ ++ ++ ++/*--- Client (peer) info -----------------------------------------------------*/ ++/* adev->sta_list[] is used for: ++** accumulating and processing of scan results ++** keeping client info in AP mode ++** keeping AP info in STA mode (AP is the only one 'client') ++** keeping peer info in ad-hoc mode ++** non-firmware struct --> no packing necessary */ ++enum { ++ CLIENT_EMPTY_SLOT_0 = 0, ++ CLIENT_EXIST_1 = 1, ++ CLIENT_AUTHENTICATED_2 = 2, ++ CLIENT_ASSOCIATED_3 = 3, ++ CLIENT_JOIN_CANDIDATE = 4 ++}; ++struct client { ++ /* most frequent access first */ ++ u8 used; /* misnamed, more like 'status' */ ++ struct client* next; ++ unsigned long mtime; /* last time we heard it, in jiffies */ ++ size_t essid_len; /* length of ESSID (without '\0') */ ++ u32 sir; /* Standard IR */ ++ u32 snr; /* Signal to Noise Ratio */ ++ u16 aid; /* association ID */ ++ u16 seq; /* from client's auth req */ ++ u16 auth_alg; /* from client's auth req */ ++ u16 cap_info; /* from client's assoc req */ ++ u16 rate_cap; /* what client supports (all rates) */ ++ u16 rate_bas; /* what client supports (basic rates) */ ++ u16 rate_cfg; /* what is allowed (by iwconfig etc) */ ++ u16 rate_cur; /* currently used rate mask */ ++ u8 rate_100; /* currently used rate byte (acx100 only) */ ++ u8 address[ETH_ALEN]; ++ u8 bssid[ETH_ALEN]; /* ad-hoc hosts can have bssid != mac */ ++ u8 channel; ++ u8 auth_step; ++ u8 ignore_count; ++ u8 fallback_count; ++ u8 stepup_count; ++ char essid[IW_ESSID_MAX_SIZE + 1]; /* ESSID and trailing '\0' */ ++/* FIXME: this one is too damn big */ ++ char challenge_text[WLAN_CHALLENGE_LEN]; ++}; ++ ++ ++/*********************************************************************** ++** Hardware structures ++*/ ++ ++/* An opaque typesafe helper type ++ * ++ * Some hardware fields are actually pointers, ++ * but they have to remain u32, since using ptr instead ++ * (8 bytes on 64bit systems!) would disrupt the fixed descriptor ++ * format the acx firmware expects in the non-user area. ++ * Since we cannot cram an 8 byte ptr into 4 bytes, we need to ++ * enforce that pointed to data remains in low memory ++ * (address value needs to fit in 4 bytes) on 64bit systems. ++ * ++ * This is easy to get wrong, thus we are using a small struct ++ * and special macros to access it. Macros will check for ++ * attempts to overflow an acx_ptr with value > 0xffffffff. ++ * ++ * Attempts to use acx_ptr without macros result in compile-time errors */ ++ ++typedef struct { ++ u32 v; ++} ACX_PACKED acx_ptr; ++ ++#if ACX_DEBUG ++#define CHECK32(n) BUG_ON(sizeof(n)>4 && (long)(n)>0xffffff00) ++#else ++#define CHECK32(n) ((void)0) ++#endif ++ ++/* acx_ptr <-> integer conversion */ ++#define cpu2acx(n) ({ CHECK32(n); ((acx_ptr){ .v = cpu_to_le32(n) }); }) ++#define acx2cpu(a) (le32_to_cpu(a.v)) ++ ++/* acx_ptr <-> pointer conversion */ ++#define ptr2acx(p) ({ CHECK32(p); ((acx_ptr){ .v = cpu_to_le32((u32)(long)(p)) }); }) ++#define acx2ptr(a) ((void*)le32_to_cpu(a.v)) ++ ++/* Values for rate field (acx100 only) */ ++#define RATE100_1 10 ++#define RATE100_2 20 ++#define RATE100_5 55 ++#define RATE100_11 110 ++#define RATE100_22 220 ++/* This bit denotes use of PBCC: ++** (PBCC encoding is usable with 11 and 22 Mbps speeds only) */ ++#define RATE100_PBCC511 0x80 ++ ++/* Bit values for rate111 field */ ++#define RATE111_1 0x0001 /* DBPSK */ ++#define RATE111_2 0x0002 /* DQPSK */ ++#define RATE111_5 0x0004 /* CCK or PBCC */ ++#define RATE111_6 0x0008 /* CCK-OFDM or OFDM */ ++#define RATE111_9 0x0010 /* CCK-OFDM or OFDM */ ++#define RATE111_11 0x0020 /* CCK or PBCC */ ++#define RATE111_12 0x0040 /* CCK-OFDM or OFDM */ ++#define RATE111_18 0x0080 /* CCK-OFDM or OFDM */ ++#define RATE111_22 0x0100 /* PBCC */ ++#define RATE111_24 0x0200 /* CCK-OFDM or OFDM */ ++#define RATE111_36 0x0400 /* CCK-OFDM or OFDM */ ++#define RATE111_48 0x0800 /* CCK-OFDM or OFDM */ ++#define RATE111_54 0x1000 /* CCK-OFDM or OFDM */ ++#define RATE111_RESERVED 0x2000 ++#define RATE111_PBCC511 0x4000 /* PBCC mod at 5.5 or 11Mbit (else CCK) */ ++#define RATE111_SHORTPRE 0x8000 /* short preamble */ ++/* Special 'try everything' value */ ++#define RATE111_ALL 0x1fff ++/* These bits denote acx100 compatible settings */ ++#define RATE111_ACX100_COMPAT 0x0127 ++/* These bits denote 802.11b compatible settings */ ++#define RATE111_80211B_COMPAT 0x0027 ++ ++/* Descriptor Ctl field bits ++ * init value is 0x8e, "idle" value is 0x82 (in idle tx descs) ++ */ ++#define DESC_CTL_SHORT_PREAMBLE 0x01 /* preamble type: 0 = long; 1 = short */ ++#define DESC_CTL_FIRSTFRAG 0x02 /* this is the 1st frag of the frame */ ++#define DESC_CTL_AUTODMA 0x04 ++#define DESC_CTL_RECLAIM 0x08 /* ready to reuse */ ++#define DESC_CTL_HOSTDONE 0x20 /* host has finished processing */ ++#define DESC_CTL_ACXDONE 0x40 /* acx has finished processing */ ++/* host owns the desc [has to be released last, AFTER modifying all other desc fields!] */ ++#define DESC_CTL_HOSTOWN 0x80 ++#define DESC_CTL_ACXDONE_HOSTOWN (DESC_CTL_ACXDONE | DESC_CTL_HOSTOWN) ++ ++/* Descriptor Status field ++ */ ++#define DESC_STATUS_FULL (1 << 31) ++ ++/* NB: some bits may be interesting for Monitor mode tx (aka Raw tx): */ ++#define DESC_CTL2_SEQ 0x01 /* don't increase sequence field */ ++#define DESC_CTL2_FCS 0x02 /* don't add the FCS */ ++#define DESC_CTL2_MORE_FRAG 0x04 ++#define DESC_CTL2_RETRY 0x08 /* don't increase retry field */ ++#define DESC_CTL2_POWER 0x10 /* don't increase power mgmt. field */ ++#define DESC_CTL2_RTS 0x20 /* do RTS/CTS magic before sending */ ++#define DESC_CTL2_WEP 0x40 /* encrypt this frame */ ++#define DESC_CTL2_DUR 0x80 /* don't increase duration field */ ++ ++/*********************************************************************** ++** PCI structures ++*/ ++/* IRQ Constants ++** (outside of "#ifdef PCI" because USB (mis)uses HOST_INT_SCAN_COMPLETE) */ ++#define HOST_INT_RX_DATA 0x0001 ++#define HOST_INT_TX_COMPLETE 0x0002 ++#define HOST_INT_TX_XFER 0x0004 ++#define HOST_INT_RX_COMPLETE 0x0008 ++#define HOST_INT_DTIM 0x0010 ++#define HOST_INT_BEACON 0x0020 ++#define HOST_INT_TIMER 0x0040 ++#define HOST_INT_KEY_NOT_FOUND 0x0080 ++#define HOST_INT_IV_ICV_FAILURE 0x0100 ++#define HOST_INT_CMD_COMPLETE 0x0200 ++#define HOST_INT_INFO 0x0400 ++#define HOST_INT_OVERFLOW 0x0800 ++#define HOST_INT_PROCESS_ERROR 0x1000 ++#define HOST_INT_SCAN_COMPLETE 0x2000 ++#define HOST_INT_FCS_THRESHOLD 0x4000 ++#define HOST_INT_UNKNOWN 0x8000 ++ ++/* Outside of "#ifdef PCI" because USB needs to know sizeof() ++** of txdesc and rxdesc: */ ++struct txdesc { ++ acx_ptr pNextDesc; /* pointer to next txdesc */ ++ acx_ptr HostMemPtr; /* 0x04 */ ++ acx_ptr AcxMemPtr; /* 0x08 */ ++ u32 tx_time; /* 0x0c */ ++ u16 total_length; /* 0x10 */ ++ u16 Reserved; /* 0x12 */ ++ ++/* The following 16 bytes do not change when acx100 owns the descriptor */ ++/* BUG: fw clears last byte of this area which is supposedly reserved ++** for driver use. amd64 blew up. We dare not use it now */ ++ u32 dummy[4]; ++ ++ u8 Ctl_8; /* 0x24, 8bit value */ ++ u8 Ctl2_8; /* 0x25, 8bit value */ ++ u8 error; /* 0x26 */ ++ u8 ack_failures; /* 0x27 */ ++ ++ union { ++ /* ++ * Packing doesn't work correctly on ARM unless unions are on ++ * 4 byte boundaries. ++ */ ++ struct { ++ u8 rts_failures; /* 0x28 */ ++ u8 rts_ok; /* 0x29 */ ++ u16 d1; ++ } ACX_PACKED rts; ++ struct { ++ u16 d1; ++ u8 rate; /* 0x2a */ ++ u8 queue_ctrl; /* 0x2b */ ++ } ACX_PACKED r1; ++ struct { ++ u16 d1; ++ u16 rate111; /* 0x2a */ ++ } ACX_PACKED r2; ++ } ACX_PACKED u; ++ u32 queue_info; /* 0x2c (acx100, reserved on acx111) */ ++} ACX_PACKED; /* size : 48 = 0x30 */ ++/* NB: acx111 txdesc structure is 4 byte larger */ ++/* All these 4 extra bytes are reserved. tx alloc code takes them into account */ ++ ++struct rxdesc { ++ acx_ptr pNextDesc; /* 0x00 */ ++ acx_ptr HostMemPtr; /* 0x04 */ ++ acx_ptr ACXMemPtr; /* 0x08 */ ++ u32 rx_time; /* 0x0c */ ++ u16 total_length; /* 0x10 */ ++ u16 WEP_length; /* 0x12 */ ++ u32 WEP_ofs; /* 0x14 */ ++ ++/* the following 16 bytes do not change when acx100 owns the descriptor */ ++ u8 driverWorkspace[16]; /* 0x18 */ ++ ++ u8 Ctl_8; ++ u8 rate; ++ u8 error; ++ u8 SNR; /* Signal-to-Noise Ratio */ ++ u8 RxLevel; ++ u8 queue_ctrl; ++ u16 unknown; ++ u32 unknown2; ++} ACX_PACKED; /* size 52 = 0x34 */ ++ ++#if defined(ACX_PCI) || defined(ACX_MEM) ++ ++/* Register I/O offsets */ ++#define ACX100_EEPROM_ID_OFFSET 0x380 ++ ++/* please add further ACX hardware register definitions only when ++ it turns out you need them in the driver, and please try to use ++ firmware functionality instead, since using direct I/O access instead ++ of letting the firmware do it might confuse the firmware's state ++ machine */ ++ ++/* ***** ABSOLUTELY ALWAYS KEEP OFFSETS IN SYNC WITH THE INITIALIZATION ++** OF THE I/O ARRAYS!!!! (grep for '^IO_ACX') ***** */ ++enum { ++ IO_ACX_SOFT_RESET = 0, ++ ++ IO_ACX_SLV_MEM_ADDR, ++ IO_ACX_SLV_MEM_DATA, ++ IO_ACX_SLV_MEM_CTL, ++ IO_ACX_SLV_END_CTL, ++ ++ IO_ACX_FEMR, /* Function Event Mask */ ++ ++ IO_ACX_INT_TRIG, ++ IO_ACX_IRQ_MASK, ++ IO_ACX_IRQ_STATUS_NON_DES, ++ IO_ACX_IRQ_STATUS_CLEAR, /* CLEAR = clear on read */ ++ IO_ACX_IRQ_ACK, ++ IO_ACX_HINT_TRIG, ++ ++ IO_ACX_ENABLE, ++ ++ IO_ACX_EEPROM_CTL, ++ IO_ACX_EEPROM_ADDR, ++ IO_ACX_EEPROM_DATA, ++ IO_ACX_EEPROM_CFG, ++ ++ IO_ACX_PHY_ADDR, ++ IO_ACX_PHY_DATA, ++ IO_ACX_PHY_CTL, ++ ++ IO_ACX_GPIO_OE, ++ ++ IO_ACX_GPIO_OUT, ++ ++ IO_ACX_CMD_MAILBOX_OFFS, ++ IO_ACX_INFO_MAILBOX_OFFS, ++ IO_ACX_EEPROM_INFORMATION, ++ ++ IO_ACX_EE_START, ++ IO_ACX_SOR_CFG, ++ IO_ACX_ECPU_CTRL ++}; ++/* ***** ABSOLUTELY ALWAYS KEEP OFFSETS IN SYNC WITH THE INITIALIZATION ++** OF THE I/O ARRAYS!!!! (grep for '^IO_ACX') ***** */ ++ ++/* Values for IO_ACX_INT_TRIG register: */ ++/* inform hw that rxdesc in queue needs processing */ ++#define INT_TRIG_RXPRC 0x08 ++/* inform hw that txdesc in queue needs processing */ ++#define INT_TRIG_TXPRC 0x04 ++/* ack that we received info from info mailbox */ ++#define INT_TRIG_INFOACK 0x02 ++/* inform hw that we have filled command mailbox */ ++#define INT_TRIG_CMD 0x01 ++ ++struct txhostdesc { ++ acx_ptr data_phy; /* 0x00 [u8 *] */ ++ u16 data_offset; /* 0x04 */ ++ u16 reserved; /* 0x06 */ ++ u16 Ctl_16; /* 16bit value, endianness!! */ ++ u16 length; /* 0x0a */ ++ acx_ptr desc_phy_next; /* 0x0c [txhostdesc *] */ ++ acx_ptr pNext; /* 0x10 [txhostdesc *] */ ++ u32 Status; /* 0x14, unused on Tx */ ++/* From here on you can use this area as you want (variable length, too!) */ ++ u8 *data; ++} ACX_PACKED; ++ ++struct rxhostdesc { ++ acx_ptr data_phy; /* 0x00 [rxbuffer_t *] */ ++ u16 data_offset; /* 0x04 */ ++ u16 reserved; /* 0x06 */ ++ u16 Ctl_16; /* 0x08; 16bit value, endianness!! */ ++ u16 length; /* 0x0a */ ++ acx_ptr desc_phy_next; /* 0x0c [rxhostdesc_t *] */ ++ acx_ptr pNext; /* 0x10 [rxhostdesc_t *] */ ++ u32 Status; /* 0x14 */ ++/* From here on you can use this area as you want (variable length, too!) */ ++ rxbuffer_t *data; ++} ACX_PACKED; ++ ++#endif /* ACX_PCI */ ++ ++/*********************************************************************** ++** USB structures and constants ++*/ ++#ifdef ACX_USB ++ ++/* Used for usb_txbuffer.desc field */ ++#define USB_TXBUF_TXDESC 0xA ++/* Size of header (everything up to data[]) */ ++#define USB_TXBUF_HDRSIZE 14 ++typedef struct usb_txbuffer { ++ u16 desc; ++ u16 mpdu_len; ++ u8 queue_index; ++ u8 rate; ++ u32 hostdata; ++ u8 ctrl1; ++ u8 ctrl2; ++ u16 data_len; ++ /* wlan packet content is placed here: */ ++ u8 data[WLAN_A4FR_MAXLEN_WEP_FCS]; ++} ACX_PACKED usb_txbuffer_t; ++ ++/* USB returns either rx packets (see rxbuffer) or ++** these "tx status" structs: */ ++typedef struct usb_txstatus { ++ u16 mac_cnt_rcvd; /* only 12 bits are len! (0xfff) */ ++ u8 queue_index; ++ u8 mac_status; /* seen 0x20 on tx failure */ ++ u32 hostdata; ++ u8 rate; ++ u8 ack_failures; ++ u8 rts_failures; ++ u8 rts_ok; ++} ACX_PACKED usb_txstatus_t; ++ ++typedef struct usb_tx { ++ unsigned busy:1; ++ struct urb *urb; ++ acx_device_t *adev; ++ /* actual USB bulk output data block is here: */ ++ usb_txbuffer_t bulkout; ++} usb_tx_t; ++ ++struct usb_rx_plain { ++ unsigned busy:1; ++ struct urb *urb; ++ acx_device_t *adev; ++ rxbuffer_t bulkin; ++}; ++ ++typedef struct usb_rx { ++ unsigned busy:1; ++ struct urb *urb; ++ acx_device_t *adev; ++ rxbuffer_t bulkin; ++ /* Make entire structure 4k. Report if it breaks something. */ ++ u8 padding[4*1024 - sizeof(struct usb_rx_plain)]; ++} usb_rx_t; ++#endif /* ACX_USB */ ++ ++ ++/* Config Option structs */ ++ ++typedef struct co_antennas { ++ u8 type; ++ u8 len; ++ u8 list[2]; ++} ACX_PACKED co_antennas_t; ++ ++typedef struct co_powerlevels { ++ u8 type; ++ u8 len; ++ u16 list[8]; ++} ACX_PACKED co_powerlevels_t; ++ ++typedef struct co_datarates { ++ u8 type; ++ u8 len; ++ u8 list[8]; ++} ACX_PACKED co_datarates_t; ++ ++typedef struct co_domains { ++ u8 type; ++ u8 len; ++ u8 list[6]; ++} ACX_PACKED co_domains_t; ++ ++typedef struct co_product_id { ++ u8 type; ++ u8 len; ++ u8 list[128]; ++} ACX_PACKED co_product_id_t; ++ ++typedef struct co_manuf_id { ++ u8 type; ++ u8 len; ++ u8 list[128]; ++} ACX_PACKED co_manuf_t; ++ ++typedef struct co_fixed { ++ char NVSv[8]; ++/* u16 NVS_vendor_offs; ACX111-only */ ++/* u16 unknown; ACX111-only */ ++ u8 MAC[6]; /* ACX100-only */ ++ u16 probe_delay; /* ACX100-only */ ++ u32 eof_memory; ++ u8 dot11CCAModes; ++ u8 dot11Diversity; ++ u8 dot11ShortPreambleOption; ++ u8 dot11PBCCOption; ++ u8 dot11ChannelAgility; ++ u8 dot11PhyType; /* FIXME: does 802.11 call it "dot11PHYType"? */ ++ u8 dot11TempType; ++ u8 table_count; ++} ACX_PACKED co_fixed_t; ++ ++typedef struct acx111_ie_configoption { ++ u16 type; ++ u16 len; ++/* Do not access below members directly, they are in fact variable length */ ++ co_fixed_t fixed; ++ co_antennas_t antennas; ++ co_powerlevels_t power_levels; ++ co_datarates_t data_rates; ++ co_domains_t domains; ++ co_product_id_t product_id; ++ co_manuf_t manufacturer; ++ u8 _padding[4]; ++} ACX_PACKED acx111_ie_configoption_t; ++ ++ ++/*********************************************************************** ++** Main acx per-device data structure ++*/ ++#define ACX_STATE_FW_LOADED 0x01 ++#define ACX_STATE_IFACE_UP 0x02 ++ ++/* MAC mode (BSS type) defines ++ * Note that they shouldn't be redefined, since they are also used ++ * during communication with firmware */ ++#define ACX_MODE_0_ADHOC 0 ++#define ACX_MODE_1_UNUSED 1 ++#define ACX_MODE_2_STA 2 ++#define ACX_MODE_3_AP 3 ++/* These are our own inventions. Sending these to firmware ++** makes it stop emitting beacons, which is exactly what we want ++** for these modes */ ++#define ACX_MODE_MONITOR 0xfe ++#define ACX_MODE_OFF 0xff ++/* 'Submode': identifies exact status of ADHOC/STA host */ ++#define ACX_STATUS_0_STOPPED 0 ++#define ACX_STATUS_1_SCANNING 1 ++#define ACX_STATUS_2_WAIT_AUTH 2 ++#define ACX_STATUS_3_AUTHENTICATED 3 ++#define ACX_STATUS_4_ASSOCIATED 4 ++ ++/* FIXME: this should be named something like struct acx_priv (typedef'd to ++ * acx_priv_t) */ ++ ++/* non-firmware struct, no packing necessary */ ++struct acx_device { ++ /* most frequent accesses first (dereferencing and cache line!) */ ++ ++ /*** Locking ***/ ++ /* FIXME: try to convert semaphore to more efficient mutex according ++ to Ingo Molnar's docs (but not before driver is in mainline or ++ pre-mutex Linux 2.6.10 is very outdated). */ ++ struct semaphore sem; ++ spinlock_t lock; ++#if defined(PARANOID_LOCKING) /* Lock debugging */ ++ const char *last_sem; ++ const char *last_lock; ++ unsigned long sem_time; ++ unsigned long lock_time; ++#endif ++#ifdef ACX_MEM ++ spinlock_t txbuf_lock; ++#endif ++ ++ /*** Linux network device ***/ ++ struct net_device *ndev; /* pointer to linux netdevice */ ++ ++ /*** Device statistics ***/ ++ struct net_device_stats stats; /* net device statistics */ ++#ifdef WIRELESS_EXT ++ struct iw_statistics wstats; /* wireless statistics */ ++#endif ++ /*** Power managment ***/ ++ struct pm_dev *pm; /* PM crap */ ++ ++ /*** Management timer ***/ ++ struct timer_list mgmt_timer; ++ ++ /*** Hardware identification ***/ ++ const char *chip_name; ++ u8 dev_type; ++ u8 chip_type; ++ u8 form_factor; ++ u8 radio_type; ++ u8 eeprom_version; ++ ++ /*** Config retrieved from EEPROM ***/ ++ char cfgopt_NVSv[8]; ++ u16 cfgopt_NVS_vendor_offs; ++ u8 cfgopt_MAC[6]; ++ u16 cfgopt_probe_delay; ++ u32 cfgopt_eof_memory; ++ u8 cfgopt_dot11CCAModes; ++ u8 cfgopt_dot11Diversity; ++ u8 cfgopt_dot11ShortPreambleOption; ++ u8 cfgopt_dot11PBCCOption; ++ u8 cfgopt_dot11ChannelAgility; ++ u8 cfgopt_dot11PhyType; ++ u8 cfgopt_dot11TempType; ++ co_antennas_t cfgopt_antennas; ++ co_powerlevels_t cfgopt_power_levels; ++ co_datarates_t cfgopt_data_rates; ++ co_domains_t cfgopt_domains; ++ co_product_id_t cfgopt_product_id; ++ co_manuf_t cfgopt_manufacturer; ++ ++ /*** Firmware identification ***/ ++ char firmware_version[FW_ID_SIZE+1]; ++ u32 firmware_numver; ++ u32 firmware_id; ++ const u16 *ie_len; ++ const u16 *ie_len_dot11; ++ ++ /*** Device state ***/ ++ u16 dev_state_mask; ++ u8 led_power; /* power LED status */ ++ u32 get_mask; /* mask of settings to fetch from the card */ ++ u32 set_mask; /* mask of settings to write to the card */ ++ ++ /* Barely used in USB case */ ++ u16 irq_status; ++ ++ u8 after_interrupt_jobs; /* mini job list for doing actions after an interrupt occurred */ ++ WORK_STRUCT after_interrupt_task; /* our task for after interrupt actions */ ++ ++ /*** scanning ***/ ++ u16 scan_count; /* number of times to do channel scan */ ++ u8 scan_mode; /* 0 == active, 1 == passive, 2 == background */ ++ u8 scan_rate; ++ u16 scan_duration; ++ u16 scan_probe_delay; ++#if WIRELESS_EXT > 15 ++ struct iw_spy_data spy_data; /* FIXME: needs to be implemented! */ ++#endif ++ ++ /*** Wireless network settings ***/ ++ /* copy of the device address (ifconfig hw ether) that we actually use ++ ** for 802.11; copied over from the network device's MAC address ++ ** (ifconfig) when it makes sense only */ ++ u8 dev_addr[MAX_ADDR_LEN]; ++ u8 bssid[ETH_ALEN]; /* the BSSID after having joined */ ++ u8 ap[ETH_ALEN]; /* The AP we want, FF:FF:FF:FF:FF:FF is any */ ++ u16 aid; /* The Association ID sent from the AP / last used AID if we're an AP */ ++ u16 mode; /* mode from iwconfig */ ++ int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */ ++ u16 status; /* 802.11 association status */ ++ u8 essid_active; /* specific ESSID active, or select any? */ ++ u8 essid_len; /* to avoid dozens of strlen() */ ++ /* INCLUDES \0 termination for easy printf - but many places ++ ** simply want the string data memcpy'd plus a length indicator! ++ ** Keep that in mind... */ ++ char essid[IW_ESSID_MAX_SIZE+1]; ++ /* essid we are going to use for association, in case of "essid 'any'" ++ ** and in case of hidden ESSID (use configured ESSID then) */ ++ char essid_for_assoc[IW_ESSID_MAX_SIZE+1]; ++ char nick[IW_ESSID_MAX_SIZE+1]; /* see essid! */ ++ u8 channel; ++ u8 reg_dom_id; /* reg domain setting */ ++ u16 reg_dom_chanmask; ++ u16 auth_or_assoc_retries; ++ u16 scan_retries; ++ unsigned long scan_start; /* YES, jiffies is defined as "unsigned long" */ ++ ++ /* stations known to us (if we're an ap) */ ++ client_t sta_list[32]; /* tab is larger than list, so that */ ++ client_t *sta_hash_tab[64]; /* hash collisions are not likely */ ++ client_t *ap_client; /* this one is our AP (STA mode only) */ ++ ++ int dup_count; ++ int nondup_count; ++ unsigned long dup_msg_expiry; ++ u16 last_seq_ctrl; /* duplicate packet detection */ ++ ++ /* 802.11 power save mode */ ++ u8 ps_wakeup_cfg; ++ u8 ps_listen_interval; ++ u8 ps_options; ++ u8 ps_hangover_period; ++ u32 ps_enhanced_transition_time; ++ u32 ps_beacon_rx_time; ++ ++ /*** PHY settings ***/ ++ u8 fallback_threshold; ++ u8 stepup_threshold; ++ u16 rate_basic; ++ u16 rate_oper; ++ u16 rate_bcast; ++ u16 rate_bcast100; ++ u8 rate_auto; /* false if "iwconfig rate N" (WITHOUT 'auto'!) */ ++ u8 preamble_mode; /* 0 == Long Preamble, 1 == Short, 2 == Auto */ ++ u8 preamble_cur; ++ ++ u8 tx_disabled; ++ u8 tx_level_dbm; ++ /* u8 tx_level_val; */ ++ /* u8 tx_level_auto; whether to do automatic power adjustment */ ++ ++ unsigned long recalib_time_last_success; ++ unsigned long recalib_time_last_attempt; ++ int recalib_failure_count; ++ int recalib_msg_ratelimit; ++ int retry_errors_msg_ratelimit; ++ ++ unsigned long brange_time_last_state_change; /* time the power LED was last changed */ ++ u8 brange_last_state; /* last state of the LED */ ++ u8 brange_max_quality; /* maximum quality that equates to full speed */ ++ ++ u8 sensitivity; ++ u8 antenna; /* antenna settings */ ++ u8 ed_threshold; /* energy detect threshold */ ++ u8 cca; /* clear channel assessment */ ++ ++ u16 rts_threshold; ++ u16 frag_threshold; ++ u32 short_retry; ++ u32 long_retry; ++ u16 msdu_lifetime; ++ u16 listen_interval; /* given in units of beacon interval */ ++ u32 beacon_interval; ++ ++ u16 capabilities; ++ u8 rate_supported_len; ++ u8 rate_supported[13]; ++ ++ /*** Encryption settings (WEP) ***/ ++ u32 auth_alg; /* used in transmit_authen1 */ ++ u8 wep_enabled; ++ u8 wep_restricted; ++ u8 wep_current_index; ++ wep_key_t wep_keys[DOT11_MAX_DEFAULT_WEP_KEYS]; /* the default WEP keys */ ++ key_struct_t wep_key_struct[10]; ++ ++ /*** Unknown ***/ ++ u8 dtim_interval; ++ ++#ifdef ACX_MEM ++ u32 acx_txbuf_start; ++ int acx_txbuf_numblocks; ++ u32 acx_txbuf_free; /* addr of head of free list */ ++ int acx_txbuf_blocks_free; /* how many are still open */ ++ queueindicator_t *acx_queue_indicator; ++#endif ++ ++ /*** Card Rx/Tx management ***/ ++ u16 rx_config_1; ++ u16 rx_config_2; ++ u16 memblocksize; ++ unsigned int tx_free; ++ unsigned int tx_head; /* keep as close as possible to Tx stuff below (cache line) */ ++ u16 phy_header_len; ++ ++/************************************************************************* ++ *** PCI/USB/... must be last or else hw agnostic code breaks horribly *** ++ *************************************************************************/ ++ ++ /* hack to let common code compile. FIXME */ ++ dma_addr_t rxhostdesc_startphy; ++ ++ /*** PCI stuff ***/ ++#if defined(ACX_PCI) || defined(ACX_MEM) ++ /* pointers to tx buffers, tx host descriptors (in host memory) ++ ** and tx descs in device memory */ ++ unsigned int tx_tail; ++ u8 *txbuf_start; ++ txhostdesc_t *txhostdesc_start; ++ txdesc_t *txdesc_start; /* points to PCI-mapped memory */ ++ dma_addr_t txbuf_startphy; ++ dma_addr_t txhostdesc_startphy; ++ /* sizes of above host memory areas */ ++ unsigned int txbuf_area_size; ++ unsigned int txhostdesc_area_size; ++ ++ unsigned int txdesc_size; /* size of txdesc; ACX111 = ACX100 + 4 */ ++ client_t *txc[TX_CNT]; ++ u16 txr[TX_CNT]; ++ ++ /* same for rx */ ++ unsigned int rx_tail; ++ rxbuffer_t *rxbuf_start; ++ rxhostdesc_t *rxhostdesc_start; ++ rxdesc_t *rxdesc_start; ++ /* physical addresses of above host memory areas */ ++ dma_addr_t rxbuf_startphy; ++ /* dma_addr_t rxhostdesc_startphy; */ ++ unsigned int rxbuf_area_size; ++ unsigned int rxhostdesc_area_size; ++ ++ u8 need_radio_fw; ++ u8 irqs_active; /* whether irq sending is activated */ ++ ++ const u16 *io; /* points to ACX100 or ACX111 PCI I/O register address set */ ++ ++#ifdef ACX_PCI ++ struct pci_dev *pdev; ++#endif ++#ifdef ACX_MEM ++ struct device *dev; ++#endif ++ ++#ifdef ACX_PCI ++ unsigned long membase; ++#endif ++#ifdef ACX_MEM ++ volatile u32 *membase; ++#endif ++ unsigned long membase2; ++#ifdef ACX_PCI ++ void __iomem *iobase; ++#endif ++#ifdef ACX_MEM ++ volatile u32 *iobase; ++#endif ++ void __iomem *iobase2; ++ /* command interface */ ++ u8 __iomem *cmd_area; ++ u8 __iomem *info_area; ++ ++ u16 irq_mask; /* interrupt types to mask out (not wanted) with many IRQs activated */ ++ u16 irq_mask_off; /* interrupt types to mask out (not wanted) with IRQs off */ ++ unsigned int irq_loops_this_jiffy; ++ unsigned long irq_last_jiffies; ++#endif ++ ++ /*** USB stuff ***/ ++#ifdef ACX_USB ++ struct usb_device *usbdev; ++ ++ rxbuffer_t rxtruncbuf; ++ ++ usb_tx_t *usb_tx; ++ usb_rx_t *usb_rx; ++ ++ int bulkinep; /* bulk-in endpoint */ ++ int bulkoutep; /* bulk-out endpoint */ ++ int rxtruncsize; ++#endif ++ ++}; ++ ++static inline acx_device_t* ++ndev2adev(struct net_device *ndev) ++{ ++ return netdev_priv(ndev); ++} ++ ++ ++/* For use with ACX1xx_IE_RXCONFIG */ ++/* bit description ++ * 13 include additional header (length etc.) *required* ++ * struct is defined in 'struct rxbuffer' ++ * is this bit acx100 only? does acx111 always put the header, ++ * and bit setting is irrelevant? --vda ++ * 10 receive frames only with SSID used in last join cmd ++ * 9 discard broadcast ++ * 8 receive packets for multicast address 1 ++ * 7 receive packets for multicast address 0 ++ * 6 discard all multicast packets ++ * 5 discard frames from foreign BSSID ++ * 4 discard frames with foreign destination MAC address ++ * 3 promiscuous mode (receive ALL frames, disable filter) ++ * 2 include FCS ++ * 1 include phy header ++ * 0 ??? ++ */ ++#define RX_CFG1_INCLUDE_RXBUF_HDR 0x2000 /* ACX100 only */ ++#define RX_CFG1_FILTER_SSID 0x0400 ++#define RX_CFG1_FILTER_BCAST 0x0200 ++#define RX_CFG1_RCV_MC_ADDR1 0x0100 ++#define RX_CFG1_RCV_MC_ADDR0 0x0080 ++#define RX_CFG1_FILTER_ALL_MULTI 0x0040 ++#define RX_CFG1_FILTER_BSSID 0x0020 ++#define RX_CFG1_FILTER_MAC 0x0010 ++#define RX_CFG1_RCV_PROMISCUOUS 0x0008 ++#define RX_CFG1_INCLUDE_FCS 0x0004 ++#define RX_CFG1_INCLUDE_PHY_HDR (WANT_PHY_HDR ? 0x0002 : 0) ++/* bit description ++ * 11 receive association requests etc. ++ * 10 receive authentication frames ++ * 9 receive beacon frames ++ * 8 receive contention free packets ++ * 7 receive control frames ++ * 6 receive data frames ++ * 5 receive broken frames ++ * 4 receive management frames ++ * 3 receive probe requests ++ * 2 receive probe responses ++ * 1 receive RTS/CTS/ACK frames ++ * 0 receive other ++ */ ++#define RX_CFG2_RCV_ASSOC_REQ 0x0800 ++#define RX_CFG2_RCV_AUTH_FRAMES 0x0400 ++#define RX_CFG2_RCV_BEACON_FRAMES 0x0200 ++#define RX_CFG2_RCV_CONTENTION_FREE 0x0100 ++#define RX_CFG2_RCV_CTRL_FRAMES 0x0080 ++#define RX_CFG2_RCV_DATA_FRAMES 0x0040 ++#define RX_CFG2_RCV_BROKEN_FRAMES 0x0020 ++#define RX_CFG2_RCV_MGMT_FRAMES 0x0010 ++#define RX_CFG2_RCV_PROBE_REQ 0x0008 ++#define RX_CFG2_RCV_PROBE_RESP 0x0004 ++#define RX_CFG2_RCV_ACK_FRAMES 0x0002 ++#define RX_CFG2_RCV_OTHER 0x0001 ++ ++/* For use with ACX1xx_IE_FEATURE_CONFIG */ ++#define FEATURE1_80MHZ_CLOCK 0x00000040L ++#define FEATURE1_4X 0x00000020L ++#define FEATURE1_LOW_RX 0x00000008L ++#define FEATURE1_EXTRA_LOW_RX 0x00000001L ++ ++#define FEATURE2_SNIFFER 0x00000080L ++#define FEATURE2_NO_TXCRYPT 0x00000001L ++ ++/*-- get and set mask values --*/ ++#define GETSET_LED_POWER 0x00000001L ++#define GETSET_STATION_ID 0x00000002L ++#define SET_TEMPLATES 0x00000004L ++#define SET_STA_LIST 0x00000008L ++#define GETSET_TX 0x00000010L ++#define GETSET_RX 0x00000020L ++#define SET_RXCONFIG 0x00000040L ++#define GETSET_ANTENNA 0x00000080L ++#define GETSET_SENSITIVITY 0x00000100L ++#define GETSET_TXPOWER 0x00000200L ++#define GETSET_ED_THRESH 0x00000400L ++#define GETSET_CCA 0x00000800L ++#define GETSET_POWER_80211 0x00001000L ++#define GETSET_RETRY 0x00002000L ++#define GETSET_REG_DOMAIN 0x00004000L ++#define GETSET_CHANNEL 0x00008000L ++/* Used when ESSID changes etc and we need to scan for AP anew */ ++#define GETSET_RESCAN 0x00010000L ++#define GETSET_MODE 0x00020000L ++#define GETSET_WEP 0x00040000L ++#define SET_WEP_OPTIONS 0x00080000L ++#define SET_MSDU_LIFETIME 0x00100000L ++#define SET_RATE_FALLBACK 0x00200000L ++ ++/* keep in sync with the above */ ++#define GETSET_ALL (0 \ ++/* GETSET_LED_POWER */ | 0x00000001L \ ++/* GETSET_STATION_ID */ | 0x00000002L \ ++/* SET_TEMPLATES */ | 0x00000004L \ ++/* SET_STA_LIST */ | 0x00000008L \ ++/* GETSET_TX */ | 0x00000010L \ ++/* GETSET_RX */ | 0x00000020L \ ++/* SET_RXCONFIG */ | 0x00000040L \ ++/* GETSET_ANTENNA */ | 0x00000080L \ ++/* GETSET_SENSITIVITY */| 0x00000100L \ ++/* GETSET_TXPOWER */ | 0x00000200L \ ++/* GETSET_ED_THRESH */ | 0x00000400L \ ++/* GETSET_CCA */ | 0x00000800L \ ++/* GETSET_POWER_80211 */| 0x00001000L \ ++/* GETSET_RETRY */ | 0x00002000L \ ++/* GETSET_REG_DOMAIN */ | 0x00004000L \ ++/* GETSET_CHANNEL */ | 0x00008000L \ ++/* GETSET_RESCAN */ | 0x00010000L \ ++/* GETSET_MODE */ | 0x00020000L \ ++/* GETSET_WEP */ | 0x00040000L \ ++/* SET_WEP_OPTIONS */ | 0x00080000L \ ++/* SET_MSDU_LIFETIME */ | 0x00100000L \ ++/* SET_RATE_FALLBACK */ | 0x00200000L \ ++ ) ++ ++ ++/*********************************************************************** ++** Firmware loading ++*/ ++#include /* request_firmware() */ ++#include /* struct pci_device */ ++ ++ ++/*********************************************************************** ++*/ ++typedef struct acx100_ie_memblocksize { ++ u16 type; ++ u16 len; ++ u16 size; ++} ACX_PACKED acx100_ie_memblocksize_t; ++ ++typedef struct acx100_ie_queueconfig { ++ u16 type; ++ u16 len; ++ u32 AreaSize; ++ u32 RxQueueStart; ++ u8 QueueOptions; ++ u8 NumTxQueues; ++ u8 NumRxDesc; /* for USB only */ ++ u8 pad1; ++ u32 QueueEnd; ++ u32 HostQueueEnd; /* QueueEnd2 */ ++ u32 TxQueueStart; ++ u8 TxQueuePri; ++ u8 NumTxDesc; ++ u16 pad2; ++} ACX_PACKED acx100_ie_queueconfig_t; ++ ++typedef struct acx111_ie_queueconfig { ++ u16 type; ++ u16 len; ++ u32 tx_memory_block_address; ++ u32 rx_memory_block_address; ++ u32 rx1_queue_address; ++ u32 reserved1; ++ u32 tx1_queue_address; ++ u8 tx1_attributes; ++ u16 reserved2; ++ u8 reserved3; ++} ACX_PACKED acx111_ie_queueconfig_t; ++ ++typedef struct acx100_ie_memconfigoption { ++ u16 type; ++ u16 len; ++ u32 DMA_config; ++ acx_ptr pRxHostDesc; ++ u32 rx_mem; ++ u32 tx_mem; ++ u16 RxBlockNum; ++ u16 TxBlockNum; ++} ACX_PACKED acx100_ie_memconfigoption_t; ++ ++typedef struct acx111_ie_memoryconfig { ++ u16 type; ++ u16 len; ++ u16 no_of_stations; ++ u16 memory_block_size; ++ u8 tx_rx_memory_block_allocation; ++ u8 count_rx_queues; ++ u8 count_tx_queues; ++ u8 options; ++ u8 fragmentation; ++ u16 reserved1; ++ u8 reserved2; ++ ++ /* start of rx1 block */ ++ u8 rx_queue1_count_descs; ++ u8 rx_queue1_reserved1; ++ u8 rx_queue1_type; /* must be set to 7 */ ++ u8 rx_queue1_prio; /* must be set to 0 */ ++ acx_ptr rx_queue1_host_rx_start; ++ /* end of rx1 block */ ++ ++ /* start of tx1 block */ ++ u8 tx_queue1_count_descs; ++ u8 tx_queue1_reserved1; ++ u8 tx_queue1_reserved2; ++ u8 tx_queue1_attributes; ++ /* end of tx1 block */ ++} ACX_PACKED acx111_ie_memoryconfig_t; ++ ++typedef struct acx_ie_memmap { ++ u16 type; ++ u16 len; ++ u32 CodeStart; ++ u32 CodeEnd; ++ u32 WEPCacheStart; ++ u32 WEPCacheEnd; ++ u32 PacketTemplateStart; ++ u32 PacketTemplateEnd; ++ u32 QueueStart; ++ u32 QueueEnd; ++ u32 PoolStart; ++ u32 PoolEnd; ++} ACX_PACKED acx_ie_memmap_t; ++ ++typedef struct acx111_ie_feature_config { ++ u16 type; ++ u16 len; ++ u32 feature_options; ++ u32 data_flow_options; ++} ACX_PACKED acx111_ie_feature_config_t; ++ ++typedef struct acx111_ie_tx_level { ++ u16 type; ++ u16 len; ++ u8 level; ++} ACX_PACKED acx111_ie_tx_level_t; ++ ++#define PS_CFG_ENABLE 0x80 ++#define PS_CFG_PENDING 0x40 /* status flag when entering PS */ ++#define PS_CFG_WAKEUP_MODE_MASK 0x07 ++#define PS_CFG_WAKEUP_BY_HOST 0x03 ++#define PS_CFG_WAKEUP_EACH_ITVL 0x02 ++#define PS_CFG_WAKEUP_ON_DTIM 0x01 ++#define PS_CFG_WAKEUP_ALL_BEAC 0x00 ++ ++/* Enhanced PS mode: sleep until Rx Beacon w/ the STA's AID bit set ++** in the TIM; newer firmwares only(?) */ ++#define PS_OPT_ENA_ENHANCED_PS 0x04 ++#define PS_OPT_TX_PSPOLL 0x02 /* send PSPoll frame to fetch waiting frames from AP (on frame with matching AID) */ ++#define PS_OPT_STILL_RCV_BCASTS 0x01 ++ ++typedef struct acx100_ie_powersave { ++ u16 type; ++ u16 len; ++ u8 wakeup_cfg; ++ u8 listen_interval; /* for EACH_ITVL: wake up every "beacon units" interval */ ++ u8 options; ++ u8 hangover_period; /* remaining wake time after Tx MPDU w/ PS bit, in values of 1/1024 seconds */ ++ u16 enhanced_ps_transition_time; /* rem. wake time for Enh. PS */ ++} ACX_PACKED acx100_ie_powersave_t; ++ ++typedef struct acx111_ie_powersave { ++ u16 type; ++ u16 len; ++ u8 wakeup_cfg; ++ u8 listen_interval; /* for EACH_ITVL: wake up every "beacon units" interval */ ++ u8 options; ++ u8 hangover_period; /* remaining wake time after Tx MPDU w/ PS bit, in values of 1/1024 seconds */ ++ u32 beacon_rx_time; ++ u32 enhanced_ps_transition_time; /* rem. wake time for Enh. PS */ ++} ACX_PACKED acx111_ie_powersave_t; ++ ++ ++/*********************************************************************** ++** Commands and template structures ++*/ ++ ++/* ++** SCAN command structure ++** ++** even though acx100 scan rates match RATE100 constants, ++** acx111 ones do not match! Therefore we do not use RATE100 #defines */ ++#define ACX_SCAN_RATE_1 10 ++#define ACX_SCAN_RATE_2 20 ++#define ACX_SCAN_RATE_5 55 ++#define ACX_SCAN_RATE_11 110 ++#define ACX_SCAN_RATE_22 220 ++#define ACX_SCAN_RATE_PBCC 0x80 /* OR with this if needed */ ++#define ACX_SCAN_OPT_ACTIVE 0x00 /* a bit mask */ ++#define ACX_SCAN_OPT_PASSIVE 0x01 ++/* Background scan: we go into Power Save mode (by transmitting ++** NULL data frame to AP with the power mgmt bit set), do the scan, ++** and then exit Power Save mode. A plus is that AP buffers frames ++** for us while we do background scan. Thus we avoid frame losses. ++** Background scan can be active or passive, just like normal one */ ++#define ACX_SCAN_OPT_BACKGROUND 0x02 ++typedef struct acx100_scan { ++ u16 count; /* number of scans to do, 0xffff == continuous */ ++ u16 start_chan; ++ u16 flags; /* channel list mask; 0x8000 == all channels? */ ++ u8 max_rate; /* max. probe rate */ ++ u8 options; /* bit mask, see defines above */ ++ u16 chan_duration; ++ u16 max_probe_delay; ++} ACX_PACKED acx100_scan_t; /* length 0xc */ ++ ++#define ACX111_SCAN_RATE_6 0x0B ++#define ACX111_SCAN_RATE_9 0x0F ++#define ACX111_SCAN_RATE_12 0x0A ++#define ACX111_SCAN_RATE_18 0x0E ++#define ACX111_SCAN_RATE_24 0x09 ++#define ACX111_SCAN_RATE_36 0x0D ++#define ACX111_SCAN_RATE_48 0x08 ++#define ACX111_SCAN_RATE_54 0x0C ++#define ACX111_SCAN_OPT_5GHZ 0x04 /* else 2.4GHZ */ ++#define ACX111_SCAN_MOD_SHORTPRE 0x01 /* you can combine SHORTPRE and PBCC */ ++#define ACX111_SCAN_MOD_PBCC 0x80 ++#define ACX111_SCAN_MOD_OFDM 0x40 ++typedef struct acx111_scan { ++ u16 count; /* number of scans to do */ ++ u8 channel_list_select; /* 0: scan all channels, 1: from chan_list only */ ++ u16 reserved1; ++ u8 reserved2; ++ u8 rate; /* rate for probe requests (if active scan) */ ++ u8 options; /* bit mask, see defines above */ ++ u16 chan_duration; /* min time to wait for reply on one channel (in TU) */ ++ /* (active scan only) (802.11 section 11.1.3.2.2) */ ++ u16 max_probe_delay; /* max time to wait for reply on one channel (active scan) */ ++ /* time to listen on a channel (passive scan) */ ++ u8 modulation; ++ u8 channel_list[26]; /* bits 7:0 first byte: channels 8:1 */ ++ /* bits 7:0 second byte: channels 16:9 */ ++ /* 26 bytes is enough to cover 802.11a */ ++} ACX_PACKED acx111_scan_t; ++ ++ ++/* ++** Radio calibration command structure ++*/ ++typedef struct acx111_cmd_radiocalib { ++/* 0x80000000 == automatic calibration by firmware, according to interval; ++ * bits 0..3: select calibration methods to go through: ++ * calib based on DC, AfeDC, Tx mismatch, Tx equilization */ ++ u32 methods; ++ u32 interval; ++} ACX_PACKED acx111_cmd_radiocalib_t; ++ ++ ++/* ++** Packet template structures ++** ++** Packet templates store contents of Beacon, Probe response, Probe request, ++** Null data frame, and TIM data frame. Firmware automatically transmits ++** contents of template at appropriate time: ++** - Beacon: when configured as AP or Ad-hoc ++** - Probe response: when configured as AP or Ad-hoc, whenever ++** a Probe request frame is received ++** - Probe request: when host issues SCAN command (active) ++** - Null data frame: when entering 802.11 power save mode ++** - TIM data: at the end of Beacon frames (if no TIM template ++** is configured, then transmits default TIM) ++** NB: ++** - size field must be set to size of actual template ++** (NOT sizeof(struct) - templates are variable in length), ++** size field is not itself counted. ++** - members flagged with an asterisk must be initialized with host, ++** rest must be zero filled. ++** - variable length fields shown only in comments */ ++typedef struct acx_template_tim { ++ u16 size; ++ u8 tim_eid; /* 00 1 TIM IE ID * */ ++ u8 len; /* 01 1 Length * */ ++ u8 dtim_cnt; /* 02 1 DTIM Count */ ++ u8 dtim_period; /* 03 1 DTIM Period */ ++ u8 bitmap_ctrl; /* 04 1 Bitmap Control * (except bit0) */ ++ /* 05 n Partial Virtual Bitmap * */ ++ u8 variable[0x100 - 1-1-1-1-1]; ++} ACX_PACKED acx_template_tim_t; ++ ++typedef struct acx_template_probereq { ++ u16 size; ++ u16 fc; /* 00 2 fc * */ ++ u16 dur; /* 02 2 Duration */ ++ u8 da[6]; /* 04 6 Destination Address * */ ++ u8 sa[6]; /* 0A 6 Source Address * */ ++ u8 bssid[6]; /* 10 6 BSSID * */ ++ u16 seq; /* 16 2 Sequence Control */ ++ /* 18 n SSID * */ ++ /* nn n Supported Rates * */ ++ u8 variable[0x44 - 2-2-6-6-6-2]; ++} ACX_PACKED acx_template_probereq_t; ++ ++typedef struct acx_template_proberesp { ++ u16 size; ++ u16 fc; /* 00 2 fc * (bits [15:12] and [10:8] per 802.11 section 7.1.3.1) */ ++ u16 dur; /* 02 2 Duration */ ++ u8 da[6]; /* 04 6 Destination Address */ ++ u8 sa[6]; /* 0A 6 Source Address */ ++ u8 bssid[6]; /* 10 6 BSSID */ ++ u16 seq; /* 16 2 Sequence Control */ ++ u8 timestamp[8];/* 18 8 Timestamp */ ++ u16 beacon_interval; /* 20 2 Beacon Interval * */ ++ u16 cap; /* 22 2 Capability Information * */ ++ /* 24 n SSID * */ ++ /* nn n Supported Rates * */ ++ /* nn 1 DS Parameter Set * */ ++ u8 variable[0x54 - 2-2-6-6-6-2-8-2-2]; ++} ACX_PACKED acx_template_proberesp_t; ++#define acx_template_beacon_t acx_template_proberesp_t ++#define acx_template_beacon acx_template_proberesp ++ ++typedef struct acx_template_nullframe { ++ u16 size; ++ struct wlan_hdr_a3 hdr; ++} ACX_PACKED acx_template_nullframe_t; ++ ++ ++/* ++** JOIN command structure ++** ++** as opposed to acx100, acx111 dtim interval is AFTER rates_basic111. ++** NOTE: took me about an hour to get !@#$%^& packing right --> struct packing is eeeeevil... */ ++typedef struct acx_joinbss { ++ u8 bssid[ETH_ALEN]; ++ u16 beacon_interval; ++ union { ++ struct { ++ u8 dtim_interval; ++ u8 rates_basic; ++ u8 rates_supported; ++ /* ++ * ARM compiler doesn't pack correctly unless unions ++ * inside structures are multiples of 4 bytes. Ugh. ++ */ ++ u8 genfrm_txrate; /* generated frame (bcn, proberesp, RTS, PSpoll) tx rate */ ++ } ACX_PACKED acx100; ++ struct { ++ u16 rates_basic; ++ u8 dtim_interval; ++ u8 genfrm_txrate; /* generated frame (bcn, proberesp, RTS, PSpoll) tx rate */ ++ } ACX_PACKED acx111; ++ /* ++ * ARM compiler doesn't pack correctly unles unions are aligned on ++ * 4 byte boundaries and are multiples of 4 bytes. ++ */ ++ struct { ++ u8 d1; ++ u8 d2; ++ u8 d3; ++ u8 genfrm_txrate; ++ } ACX_PACKED txrate; ++ } ACX_PACKED u; ++ u8 genfrm_mod_pre; /* generated frame modulation/preamble: ++ ** bit7: PBCC, bit6: OFDM (else CCK/DQPSK/DBPSK) ++ ** bit5: short pre */ ++ u8 macmode; /* BSS Type, must be one of ACX_MODE_xxx */ ++ u8 channel; ++ u8 essid_len; ++ char essid[IW_ESSID_MAX_SIZE]; ++} ACX_PACKED acx_joinbss_t; ++ ++#define JOINBSS_RATES_1 0x01 ++#define JOINBSS_RATES_2 0x02 ++#define JOINBSS_RATES_5 0x04 ++#define JOINBSS_RATES_11 0x08 ++#define JOINBSS_RATES_22 0x10 ++ ++/* Looks like missing bits are used to indicate 11g rates! ++** (it follows from the fact that constants below match 1:1 to RATE111_nn) ++** This was actually seen! Look at that Assoc Request sent by acx111, ++** it _does_ contain 11g rates in basic set: ++01:30:20.070772 Beacon (xxx) [1.0* 2.0* 5.5* 11.0* 6.0* 9.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ESS CH: 1 ++01:30:20.074425 Authentication (Open System)-1: Succesful ++01:30:20.076539 Authentication (Open System)-2: ++01:30:20.076620 Acknowledgment ++01:30:20.088546 Assoc Request (xxx) [1.0* 2.0* 5.5* 6.0* 9.0* 11.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ++01:30:20.122413 Assoc Response AID(1) :: Succesful ++01:30:20.122679 Acknowledgment ++01:30:20.173204 Beacon (xxx) [1.0* 2.0* 5.5* 11.0* 6.0* 9.0* 12.0* 18.0* 24.0* 36.0* 48.0* 54.0* Mbit] ESS CH: 1 ++*/ ++#define JOINBSS_RATES_BASIC111_1 0x0001 ++#define JOINBSS_RATES_BASIC111_2 0x0002 ++#define JOINBSS_RATES_BASIC111_5 0x0004 ++#define JOINBSS_RATES_BASIC111_11 0x0020 ++#define JOINBSS_RATES_BASIC111_22 0x0100 ++ ++ ++/*********************************************************************** ++*/ ++typedef struct mem_read_write { ++ u16 addr; ++ u16 type; /* 0x0 int. RAM / 0xffff MAC reg. / 0x81 PHY RAM / 0x82 PHY reg.; or maybe it's actually 0x30 for MAC? Better verify it by writing and reading back and checking whether the value holds! */ ++ u32 len; ++ u32 data; ++} ACX_PACKED mem_read_write_t; ++ ++typedef struct firmware_image { ++ u32 chksum; ++ u32 size; ++ u8 data[1]; /* the byte array of the actual firmware... */ ++} ACX_PACKED firmware_image_t; ++ ++typedef struct acx_cmd_radioinit { ++ u32 offset; ++ u32 len; ++} ACX_PACKED acx_cmd_radioinit_t; ++ ++typedef struct acx100_ie_wep_options { ++ u16 type; ++ u16 len; ++ u16 NumKeys; /* max # of keys */ ++ u8 WEPOption; /* 0 == decrypt default key only, 1 == override decrypt */ ++ u8 Pad; /* used only for acx111 */ ++} ACX_PACKED acx100_ie_wep_options_t; ++ ++typedef struct ie_dot11WEPDefaultKey { ++ u16 type; ++ u16 len; ++ u8 action; ++ u8 keySize; ++ u8 defaultKeyNum; ++ u8 key[29]; /* check this! was Key[19] */ ++} ACX_PACKED ie_dot11WEPDefaultKey_t; ++ ++typedef struct acx111WEPDefaultKey { ++ u8 MacAddr[ETH_ALEN]; ++ u16 action; /* NOTE: this is a u16, NOT a u8!! */ ++ u16 reserved; ++ u8 keySize; ++ u8 type; ++ u8 index; ++ u8 defaultKeyNum; ++ u8 counter[6]; ++ u8 key[32]; /* up to 32 bytes (for TKIP!) */ ++} ACX_PACKED acx111WEPDefaultKey_t; ++ ++typedef struct ie_dot11WEPDefaultKeyID { ++ u16 type; ++ u16 len; ++ u8 KeyID; ++} ACX_PACKED ie_dot11WEPDefaultKeyID_t; ++ ++typedef struct acx100_cmd_wep_mgmt { ++ u8 MacAddr[ETH_ALEN]; ++ u16 Action; ++ u16 KeySize; ++ u8 Key[29]; /* 29*8 == 232bits == WEP256 */ ++} ACX_PACKED acx100_cmd_wep_mgmt_t; ++ ++typedef struct acx_ie_generic { ++ u16 type; ++ u16 len; ++ union { ++ /* Association ID IE: just a 16bit value: */ ++ u16 aid; ++ /* generic member for quick implementation of commands */ ++ u8 bytes[32]; ++ } ACX_PACKED m; ++} ACX_PACKED acx_ie_generic_t; ++ ++/*********************************************************************** ++*/ ++#define CHECK_SIZEOF(type,size) { \ ++ extern void BUG_bad_size_for_##type(void); \ ++ if (sizeof(type)!=(size)) BUG_bad_size_for_##type(); \ ++} ++ ++static inline void ++acx_struct_size_check(void) ++{ ++ CHECK_SIZEOF(txdesc_t, 0x30); ++ CHECK_SIZEOF(acx100_ie_memconfigoption_t, 24); ++ CHECK_SIZEOF(acx100_ie_queueconfig_t, 0x20); ++ CHECK_SIZEOF(acx_joinbss_t, 0x30); ++ /* IEs need 4 bytes for (type,len) tuple */ ++ CHECK_SIZEOF(acx111_ie_configoption_t, ACX111_IE_CONFIG_OPTIONS_LEN + 4); ++} ++ ++ ++/*********************************************************************** ++** Global data ++*/ ++extern const u8 acx_bitpos2ratebyte[]; ++extern const u8 acx_bitpos2rate100[]; ++ ++extern const u8 acx_reg_domain_ids[]; ++extern const char * const acx_reg_domain_strings[]; ++enum { ++ acx_reg_domain_ids_len = 8 ++}; ++ ++extern const struct iw_handler_def acx_ioctl_handler_def; +Index: linux-2.6.23/drivers/net/wireless/acx/common.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/common.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,7388 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++ ++#include ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) ++#include ++#endif ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "acx_hw.h" ++#include "acx.h" ++ ++ ++/*********************************************************************** ++*/ ++static client_t *acx_l_sta_list_alloc(acx_device_t *adev); ++static client_t *acx_l_sta_list_get_from_hash(acx_device_t *adev, const u8 *address); ++ ++static int acx_l_process_data_frame_master(acx_device_t *adev, rxbuffer_t *rxbuf); ++static int acx_l_process_data_frame_client(acx_device_t *adev, rxbuffer_t *rxbuf); ++/* static int acx_l_process_NULL_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala); */ ++static int acx_l_process_mgmt_frame(acx_device_t *adev, rxbuffer_t *rxbuf); ++static void acx_l_process_disassoc_from_sta(acx_device_t *adev, const wlan_fr_disassoc_t *req); ++static void acx_l_process_disassoc_from_ap(acx_device_t *adev, const wlan_fr_disassoc_t *req); ++static void acx_l_process_deauth_from_sta(acx_device_t *adev, const wlan_fr_deauthen_t *req); ++static void acx_l_process_deauth_from_ap(acx_device_t *adev, const wlan_fr_deauthen_t *req); ++static int acx_l_process_probe_response(acx_device_t *adev, wlan_fr_proberesp_t *req, const rxbuffer_t *rxbuf); ++static int acx_l_process_assocresp(acx_device_t *adev, const wlan_fr_assocresp_t *req); ++static int acx_l_process_reassocresp(acx_device_t *adev, const wlan_fr_reassocresp_t *req); ++static int acx_l_process_authen(acx_device_t *adev, const wlan_fr_authen_t *req); ++static int acx_l_transmit_assocresp(acx_device_t *adev, const wlan_fr_assocreq_t *req); ++static int acx_l_transmit_reassocresp(acx_device_t *adev, const wlan_fr_reassocreq_t *req); ++static int acx_l_transmit_deauthen(acx_device_t *adev, const u8 *addr, u16 reason); ++static int acx_l_transmit_authen1(acx_device_t *adev); ++static int acx_l_transmit_authen2(acx_device_t *adev, const wlan_fr_authen_t *req, client_t *clt); ++static int acx_l_transmit_authen3(acx_device_t *adev, const wlan_fr_authen_t *req); ++static int acx_l_transmit_authen4(acx_device_t *adev, const wlan_fr_authen_t *req); ++static int acx_l_transmit_assoc_req(acx_device_t *adev); ++ ++ ++/*********************************************************************** ++*/ ++#if ACX_DEBUG ++unsigned int acx_debug /* will add __read_mostly later */ = ACX_DEFAULT_MSG; ++/* parameter is 'debug', corresponding var is acx_debug */ ++module_param_named(debug, acx_debug, uint, 0); ++MODULE_PARM_DESC(debug, "Debug level mask (see L_xxx constants)"); ++#endif ++ ++#ifdef MODULE_LICENSE ++MODULE_LICENSE("Dual MPL/GPL"); ++#endif ++/* USB had this: MODULE_AUTHOR("Martin Wawro "); */ ++MODULE_AUTHOR("ACX100 Open Source Driver development team"); ++MODULE_DESCRIPTION("Driver for TI ACX1xx based wireless cards (CardBus/PCI/USB)"); ++ ++ ++/*********************************************************************** ++*/ ++/* Probably a number of acx's intermediate buffers for USB transfers, ++** not to be confused with number of descriptors in tx/rx rings ++** (which are not directly accessible to host in USB devices) */ ++#define USB_RX_CNT 10 ++#define USB_TX_CNT 10 ++ ++ ++/*********************************************************************** ++*/ ++ ++/* minutes to wait until next radio recalibration: */ ++#define RECALIB_PAUSE 5 ++ ++/* Please keep acx_reg_domain_ids_len in sync... */ ++const u8 acx_reg_domain_ids[acx_reg_domain_ids_len] = ++ { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40, 0x41, 0x51 }; ++static const u16 reg_domain_channel_masks[acx_reg_domain_ids_len] = ++#ifdef ACX_ALLOW_ALLCHANNELS ++ { 0x3fff, 0x07ff, 0x1fff, 0x0600, 0x1e00, 0x2000, 0x3fff, 0x01fc }; ++#else ++ { 0x07ff, 0x07ff, 0x1fff, 0x0600, 0x1e00, 0x2000, 0x3fff, 0x01fc }; ++#endif ++const char * const ++acx_reg_domain_strings[] = { ++ /* 0 */ " 1-11 FCC (USA)", ++ /* 1 */ " 1-11 DOC/IC (Canada)", ++/* BTW: WLAN use in ETSI is regulated by ETSI standard EN 300 328-2 V1.1.2 */ ++ /* 2 */ " 1-13 ETSI (Europe)", ++ /* 3 */ "10-11 Spain", ++ /* 4 */ "10-13 France", ++ /* 5 */ " 14 MKK (Japan)", ++ /* 6 */ " 1-14 MKK1", ++ /* 7 */ " 3-9 Israel (not all firmware versions)", ++ NULL /* needs to remain as last entry */ ++}; ++ ++ ++ ++/*********************************************************************** ++** Debugging support ++*/ ++#ifdef PARANOID_LOCKING ++static unsigned max_lock_time; ++static unsigned max_sem_time; ++ ++void ++acx_lock_unhold() { max_lock_time = 0; } ++void ++acx_sem_unhold() { max_sem_time = 0; } ++ ++static inline const char* ++sanitize_str(const char *s) ++{ ++ const char* t = strrchr(s, '/'); ++ if (t) return t + 1; ++ return s; ++} ++ ++void ++acx_lock_debug(acx_device_t *adev, const char* where) ++{ ++ unsigned int count = 100*1000*1000; ++ where = sanitize_str(where); ++ while (--count) { ++ if (!spin_is_locked(&adev->lock)) break; ++ cpu_relax(); ++ } ++ if (!count) { ++ printk(KERN_EMERG "LOCKUP: already taken at %s!\n", adev->last_lock); ++ BUG(); ++ } ++ adev->last_lock = where; ++ rdtscl(adev->lock_time); ++} ++void ++acx_unlock_debug(acx_device_t *adev, const char* where) ++{ ++#ifdef SMP ++ if (!spin_is_locked(&adev->lock)) { ++ where = sanitize_str(where); ++ printk(KERN_EMERG "STRAY UNLOCK at %s!\n", where); ++ BUG(); ++ } ++#endif ++ if (acx_debug & L_LOCK) { ++ unsigned long diff; ++ rdtscl(diff); ++ diff -= adev->lock_time; ++ if (diff > max_lock_time) { ++ where = sanitize_str(where); ++ printk("max lock hold time %ld CPU ticks from %s " ++ "to %s\n", diff, adev->last_lock, where); ++ max_lock_time = diff; ++ } ++ } ++} ++void ++acx_down_debug(acx_device_t *adev, const char* where) ++{ ++ int sem_count; ++ unsigned long timeout = jiffies + 5*HZ; ++ ++ where = sanitize_str(where); ++ ++ for (;;) { ++ sem_count = atomic_read(&adev->sem.count); ++ if (sem_count) break; ++ if (time_after(jiffies, timeout)) ++ break; ++ msleep(5); ++ } ++ if (!sem_count) { ++ printk(KERN_EMERG "D STATE at %s! last sem at %s\n", ++ where, adev->last_sem); ++ dump_stack(); ++ } ++ adev->last_sem = where; ++ adev->sem_time = jiffies; ++ down(&adev->sem); ++ if (acx_debug & L_LOCK) { ++ printk("%s: sem_down %d -> %d\n", ++ where, sem_count, atomic_read(&adev->sem.count)); ++ } ++} ++void ++acx_up_debug(acx_device_t *adev, const char* where) ++{ ++ int sem_count = atomic_read(&adev->sem.count); ++ if (sem_count) { ++ where = sanitize_str(where); ++ printk(KERN_EMERG "STRAY UP at %s! sem.count=%d\n", where, sem_count); ++ dump_stack(); ++ } ++ if (acx_debug & L_LOCK) { ++ unsigned long diff = jiffies - adev->sem_time; ++ if (diff > max_sem_time) { ++ where = sanitize_str(where); ++ printk("max sem hold time %ld jiffies from %s " ++ "to %s\n", diff, adev->last_sem, where); ++ max_sem_time = diff; ++ } ++ } ++ up(&adev->sem); ++ if (acx_debug & L_LOCK) { ++ where = sanitize_str(where); ++ printk("%s: sem_up %d -> %d\n", ++ where, sem_count, atomic_read(&adev->sem.count)); ++ } ++} ++#endif /* PARANOID_LOCKING */ ++ ++ ++/*********************************************************************** ++*/ ++#if ACX_DEBUG > 1 ++ ++static int acx_debug_func_indent; ++#define DEBUG_TSC 0 ++#define FUNC_INDENT_INCREMENT 2 ++ ++#if DEBUG_TSC ++#define TIMESTAMP(d) unsigned long d; rdtscl(d) ++#else ++#define TIMESTAMP(d) unsigned long d = jiffies ++#endif ++ ++static const char ++spaces[] = " " " "; /* Nx10 spaces */ ++ ++void ++log_fn_enter(const char *funcname) ++{ ++ int indent; ++ TIMESTAMP(d); ++ ++ indent = acx_debug_func_indent; ++ if (indent >= sizeof(spaces)) ++ indent = sizeof(spaces)-1; ++ ++ printk("%08ld %s==> %s\n", ++ d % 100000000, ++ spaces + (sizeof(spaces)-1) - indent, ++ funcname ++ ); ++ ++ acx_debug_func_indent += FUNC_INDENT_INCREMENT; ++} ++void ++log_fn_exit(const char *funcname) ++{ ++ int indent; ++ TIMESTAMP(d); ++ ++ acx_debug_func_indent -= FUNC_INDENT_INCREMENT; ++ ++ indent = acx_debug_func_indent; ++ if (indent >= sizeof(spaces)) ++ indent = sizeof(spaces)-1; ++ ++ printk("%08ld %s<== %s\n", ++ d % 100000000, ++ spaces + (sizeof(spaces)-1) - indent, ++ funcname ++ ); ++} ++void ++log_fn_exit_v(const char *funcname, int v) ++{ ++ int indent; ++ TIMESTAMP(d); ++ ++ acx_debug_func_indent -= FUNC_INDENT_INCREMENT; ++ ++ indent = acx_debug_func_indent; ++ if (indent >= sizeof(spaces)) ++ indent = sizeof(spaces)-1; ++ ++ printk("%08ld %s<== %s: %08X\n", ++ d % 100000000, ++ spaces + (sizeof(spaces)-1) - indent, ++ funcname, ++ v ++ ); ++} ++#endif /* ACX_DEBUG > 1 */ ++ ++ ++/*********************************************************************** ++** Basically a msleep with logging ++*/ ++void ++acx_s_msleep(int ms) ++{ ++ FN_ENTER; ++ msleep(ms); ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** Not inlined: it's larger than it seems ++*/ ++void ++acx_print_mac(const char *head, const u8 *mac, const char *tail) ++{ ++ printk("%s"MACSTR"%s", head, MAC(mac), tail); ++} ++ ++ ++/*********************************************************************** ++** acx_get_status_name ++*/ ++static const char* ++acx_get_status_name(u16 status) ++{ ++ static const char * const str[] = { ++ "STOPPED", "SCANNING", "WAIT_AUTH", ++ "AUTHENTICATED", "ASSOCIATED", "INVALID??" ++ }; ++ if (status > VEC_SIZE(str)-1) ++ status = VEC_SIZE(str)-1; ++ ++ return str[status]; ++} ++ ++ ++/*********************************************************************** ++** acx_get_packet_type_string ++*/ ++#if ACX_DEBUG ++const char* ++acx_get_packet_type_string(u16 fc) ++{ ++ static const char * const mgmt_arr[] = { ++ "MGMT/AssocReq", "MGMT/AssocResp", "MGMT/ReassocReq", ++ "MGMT/ReassocResp", "MGMT/ProbeReq", "MGMT/ProbeResp", ++ "MGMT/UNKNOWN", "MGMT/UNKNOWN", "MGMT/Beacon", "MGMT/ATIM", ++ "MGMT/Disassoc", "MGMT/Authen", "MGMT/Deauthen" ++ }; ++ static const char * const ctl_arr[] = { ++ "CTL/PSPoll", "CTL/RTS", "CTL/CTS", "CTL/Ack", "CTL/CFEnd", ++ "CTL/CFEndCFAck" ++ }; ++ static const char * const data_arr[] = { ++ "DATA/DataOnly", "DATA/Data CFAck", "DATA/Data CFPoll", ++ "DATA/Data CFAck/CFPoll", "DATA/Null", "DATA/CFAck", ++ "DATA/CFPoll", "DATA/CFAck/CFPoll" ++ }; ++ const char *str; ++ u8 fstype = (WF_FC_FSTYPE & fc) >> 4; ++ u8 ctl; ++ ++ switch (WF_FC_FTYPE & fc) { ++ case WF_FTYPE_MGMT: ++ if (fstype < VEC_SIZE(mgmt_arr)) ++ str = mgmt_arr[fstype]; ++ else ++ str = "MGMT/UNKNOWN"; ++ break; ++ case WF_FTYPE_CTL: ++ ctl = fstype - 0x0a; ++ if (ctl < VEC_SIZE(ctl_arr)) ++ str = ctl_arr[ctl]; ++ else ++ str = "CTL/UNKNOWN"; ++ break; ++ case WF_FTYPE_DATA: ++ if (fstype < VEC_SIZE(data_arr)) ++ str = data_arr[fstype]; ++ else ++ str = "DATA/UNKNOWN"; ++ break; ++ default: ++ str = "UNKNOWN"; ++ break; ++ } ++ return str; ++} ++#endif ++ ++ ++/*********************************************************************** ++** acx_wlan_reason_str ++*/ ++static inline const char* ++acx_wlan_reason_str(u16 reason) ++{ ++ static const char* const reason_str[] = { ++ /* 0 */ "?", ++ /* 1 */ "unspecified", ++ /* 2 */ "prev auth is not valid", ++ /* 3 */ "leaving BBS", ++ /* 4 */ "due to inactivity", ++ /* 5 */ "AP is busy", ++ /* 6 */ "got class 2 frame from non-auth'ed STA", ++ /* 7 */ "got class 3 frame from non-assoc'ed STA", ++ /* 8 */ "STA has left BSS", ++ /* 9 */ "assoc without auth is not allowed", ++ /* 10 */ "bad power setting (802.11h)", ++ /* 11 */ "bad channel (802.11i)", ++ /* 12 */ "?", ++ /* 13 */ "invalid IE", ++ /* 14 */ "MIC failure", ++ /* 15 */ "four-way handshake timeout", ++ /* 16 */ "group key handshake timeout", ++ /* 17 */ "IE is different", ++ /* 18 */ "invalid group cipher", ++ /* 19 */ "invalid pairwise cipher", ++ /* 20 */ "invalid AKMP", ++ /* 21 */ "unsupported RSN version", ++ /* 22 */ "invalid RSN IE cap", ++ /* 23 */ "802.1x failed", ++ /* 24 */ "cipher suite rejected" ++ }; ++ return reason < VEC_SIZE(reason_str) ? reason_str[reason] : "?"; ++} ++ ++ ++/*********************************************************************** ++** acx_cmd_status_str ++*/ ++const char* ++acx_cmd_status_str(unsigned int state) ++{ ++ static const char * const cmd_error_strings[] = { ++ "Idle", ++ "Success", ++ "Unknown Command", ++ "Invalid Information Element", ++ "Channel rejected", ++ "Channel invalid in current regulatory domain", ++ "MAC invalid", ++ "Command rejected (read-only information element)", ++ "Command rejected", ++ "Already asleep", ++ "TX in progress", ++ "Already awake", ++ "Write only", ++ "RX in progress", ++ "Invalid parameter", ++ "Scan in progress", ++ "Failed" ++ }; ++ return state < VEC_SIZE(cmd_error_strings) ? ++ cmd_error_strings[state] : "?"; ++} ++ ++ ++/*********************************************************************** ++** get_status_string ++*/ ++static inline const char* ++get_status_string(unsigned int status) ++{ ++ /* A bit shortened, but hopefully still understandable */ ++ static const char * const status_str[] = { ++ /* 0 */ "Successful", ++ /* 1 */ "Unspecified failure", ++ /* 2 */ "reserved", ++ /* 3 */ "reserved", ++ /* 4 */ "reserved", ++ /* 5 */ "reserved", ++ /* 6 */ "reserved", ++ /* 7 */ "reserved", ++ /* 8 */ "reserved", ++ /* 9 */ "reserved", ++ /*10 */ "Cannot support all requested capabilities in Capability Information field", ++ /*11 */ "Reassoc denied (reason outside of 802.11b scope)", ++ /*12 */ "Assoc denied (reason outside of 802.11b scope) -- maybe MAC filtering by peer?", ++ /*13 */ "Responding station doesnt support specified auth algorithm -- maybe WEP auth Open vs. Restricted?", ++ /*14 */ "Auth rejected: wrong transaction sequence number", ++ /*15 */ "Auth rejected: challenge failure", ++ /*16 */ "Auth rejected: timeout for next frame in sequence", ++ /*17 */ "Assoc denied: too many STAs on this AP", ++ /*18 */ "Assoc denied: requesting STA doesnt support all data rates in basic set", ++ /*19 */ "Assoc denied: requesting STA doesnt support Short Preamble", ++ /*20 */ "Assoc denied: requesting STA doesnt support PBCC Modulation", ++ /*21 */ "Assoc denied: requesting STA doesnt support Channel Agility" ++ /*22 */ "reserved", ++ /*23 */ "reserved", ++ /*24 */ "reserved", ++ /*25 */ "Assoc denied: requesting STA doesnt support Short Slot Time", ++ /*26 */ "Assoc denied: requesting STA doesnt support DSSS-OFDM" ++ }; ++ ++ return status_str[status < VEC_SIZE(status_str) ? status : 2]; ++} ++ ++ ++/*********************************************************************** ++*/ ++void ++acx_log_bad_eid(wlan_hdr_t* hdr, int len, wlan_ie_t* ie_ptr) ++{ ++ if (acx_debug & L_ASSOC) { ++ int offset = (u8*)ie_ptr - (u8*)hdr; ++ printk("acx: unknown EID %d in mgmt frame at offset %d. IE: ", ++ ie_ptr->eid, offset); ++ /* IE len can be bogus, IE can extend past packet end. Oh well... */ ++ acx_dump_bytes(ie_ptr, ie_ptr->len + 2); ++ if (acx_debug & L_DATA) { ++ printk("frame (%s): ", ++ acx_get_packet_type_string(le16_to_cpu(hdr->fc))); ++ acx_dump_bytes(hdr, len); ++ } ++ } ++} ++ ++ ++/*********************************************************************** ++*/ ++#if ACX_DEBUG ++void ++acx_dump_bytes(const void *data, int num) ++{ ++ const u8* ptr = (const u8*)data; ++ ++ if (num <= 0) { ++ printk("\n"); ++ return; ++ } ++ ++ while (num >= 16) { ++ printk( "%02X %02X %02X %02X %02X %02X %02X %02X " ++ "%02X %02X %02X %02X %02X %02X %02X %02X\n", ++ ptr[0], ptr[1], ptr[2], ptr[3], ++ ptr[4], ptr[5], ptr[6], ptr[7], ++ ptr[8], ptr[9], ptr[10], ptr[11], ++ ptr[12], ptr[13], ptr[14], ptr[15]); ++ num -= 16; ++ ptr += 16; ++ } ++ if (num > 0) { ++ while (--num > 0) ++ printk("%02X ", *ptr++); ++ printk("%02X\n", *ptr); ++ } ++} ++#endif ++ ++ ++/*********************************************************************** ++** acx_s_get_firmware_version ++*/ ++void ++acx_s_get_firmware_version(acx_device_t *adev) ++{ ++ fw_ver_t fw; ++ u8 hexarr[4] = { 0, 0, 0, 0 }; ++ int hexidx = 0, val = 0; ++ const char *num; ++ char c; ++ ++ FN_ENTER; ++ ++ memset(fw.fw_id, 'E', FW_ID_SIZE); ++ acx_s_interrogate(adev, &fw, ACX1xx_IE_FWREV); ++ memcpy(adev->firmware_version, fw.fw_id, FW_ID_SIZE); ++ adev->firmware_version[FW_ID_SIZE] = '\0'; ++ ++ log(L_DEBUG, "fw_ver: fw_id='%s' hw_id=%08X\n", ++ adev->firmware_version, fw.hw_id); ++ ++ if (strncmp(fw.fw_id, "Rev ", 4) != 0) { ++ printk("acx: strange firmware version string " ++ "'%s', please report\n", adev->firmware_version); ++ adev->firmware_numver = 0x01090407; /* assume 1.9.4.7 */ ++ } else { ++ num = &fw.fw_id[4]; ++ while (1) { ++ c = *num++; ++ if ((c == '.') || (c == '\0')) { ++ hexarr[hexidx++] = val; ++ if ((hexidx > 3) || (c == '\0')) /* end? */ ++ break; ++ val = 0; ++ continue; ++ } ++ if ((c >= '0') && (c <= '9')) ++ c -= '0'; ++ else ++ c = c - 'a' + (char)10; ++ val = val*16 + c; ++ } ++ ++ adev->firmware_numver = (u32)( ++ (hexarr[0] << 24) | (hexarr[1] << 16) ++ | (hexarr[2] << 8) | hexarr[3]); ++ log(L_DEBUG, "firmware_numver 0x%08X\n", adev->firmware_numver); ++ } ++ if (IS_ACX111(adev)) { ++ if (adev->firmware_numver == 0x00010011) { ++ /* This one does not survive floodpinging */ ++ printk("acx: firmware '%s' is known to be buggy, " ++ "please upgrade\n", adev->firmware_version); ++ } ++ } ++ ++ adev->firmware_id = le32_to_cpu(fw.hw_id); ++ ++ /* we're able to find out more detailed chip names now */ ++ switch (adev->firmware_id & 0xffff0000) { ++ case 0x01010000: ++ case 0x01020000: ++ adev->chip_name = "TNETW1100A"; ++ break; ++ case 0x01030000: ++ adev->chip_name = "TNETW1100B"; ++ break; ++ case 0x03000000: ++ case 0x03010000: ++ adev->chip_name = "TNETW1130"; ++ break; ++ case 0x04030000: /* 0x04030101 is TNETW1450 */ ++ adev->chip_name = "TNETW1450"; ++ break; ++ default: ++ printk("acx: unknown chip ID 0x%08X, " ++ "please report\n", adev->firmware_id); ++ break; ++ } ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_display_hardware_details ++** ++** Displays hw/fw version, radio type etc... ++*/ ++void ++acx_display_hardware_details(acx_device_t *adev) ++{ ++ const char *radio_str, *form_str; ++ ++ FN_ENTER; ++ ++ switch (adev->radio_type) { ++ case RADIO_MAXIM_0D: ++ radio_str = "Maxim"; ++ break; ++ case RADIO_RFMD_11: ++ radio_str = "RFMD"; ++ break; ++ case RADIO_RALINK_15: ++ radio_str = "Ralink"; ++ break; ++ case RADIO_RADIA_16: ++ radio_str = "Radia"; ++ break; ++ case RADIO_UNKNOWN_17: ++ /* TI seems to have a radio which is ++ * additionally 802.11a capable, too */ ++ radio_str = "802.11a/b/g radio?! Please report"; ++ break; ++ case RADIO_UNKNOWN_19: ++ radio_str = "A radio used by Safecom cards?! Please report"; ++ break; ++ case RADIO_UNKNOWN_1B: ++ radio_str = "An unknown radio used by TNETW1450 USB adapters"; ++ break; ++ default: ++ radio_str = "UNKNOWN, please report radio type name!"; ++ break; ++ } ++ ++ switch (adev->form_factor) { ++ case 0x00: ++ form_str = "unspecified"; ++ break; ++ case 0x01: ++ form_str = "(mini-)PCI / CardBus"; ++ break; ++ case 0x02: ++ form_str = "USB"; ++ break; ++ case 0x03: ++ form_str = "Compact Flash"; ++ break; ++ default: ++ form_str = "UNKNOWN, please report"; ++ break; ++ } ++ ++ printk("acx: === chipset %s, radio type 0x%02X (%s), " ++ "form factor 0x%02X (%s), EEPROM version 0x%02X: " ++ "uploaded firmware '%s' ===\n", ++ adev->chip_name, adev->radio_type, radio_str, ++ adev->form_factor, form_str, adev->eeprom_version, ++ adev->firmware_version); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acx_e_change_mtu(struct net_device *ndev, int mtu) ++{ ++ enum { ++ MIN_MTU = 256, ++ MAX_MTU = WLAN_DATA_MAXLEN - (ETH_HLEN) ++ }; ++ ++ if (mtu < MIN_MTU || mtu > MAX_MTU) ++ return -EINVAL; ++ ++ ndev->mtu = mtu; ++ return 0; ++} ++ ++ ++/*********************************************************************** ++** acx_e_get_stats, acx_e_get_wireless_stats ++*/ ++struct net_device_stats* ++acx_e_get_stats(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ return &adev->stats; ++} ++ ++struct iw_statistics* ++acx_e_get_wireless_stats(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ return &adev->wstats; ++} ++ ++ ++/*********************************************************************** ++** maps acx111 tx descr rate field to acx100 one ++*/ ++const u8 ++acx_bitpos2rate100[] = { ++ RATE100_1 ,/* 0 */ ++ RATE100_2 ,/* 1 */ ++ RATE100_5 ,/* 2 */ ++ RATE100_2 ,/* 3, should not happen */ ++ RATE100_2 ,/* 4, should not happen */ ++ RATE100_11 ,/* 5 */ ++ RATE100_2 ,/* 6, should not happen */ ++ RATE100_2 ,/* 7, should not happen */ ++ RATE100_22 ,/* 8 */ ++ RATE100_2 ,/* 9, should not happen */ ++ RATE100_2 ,/* 10, should not happen */ ++ RATE100_2 ,/* 11, should not happen */ ++ RATE100_2 ,/* 12, should not happen */ ++ RATE100_2 ,/* 13, should not happen */ ++ RATE100_2 ,/* 14, should not happen */ ++ RATE100_2 ,/* 15, should not happen */ ++}; ++ ++u8 ++acx_rate111to100(u16 r) { ++ return acx_bitpos2rate100[highest_bit(r)]; ++} ++ ++ ++/*********************************************************************** ++** Calculate level like the feb 2003 windows driver seems to do ++*/ ++static u8 ++acx_signal_to_winlevel(u8 rawlevel) ++{ ++ /* u8 winlevel = (u8) (0.5 + 0.625 * rawlevel); */ ++ u8 winlevel = ((4 + (rawlevel * 5)) / 8); ++ ++ if (winlevel > 100) ++ winlevel = 100; ++ return winlevel; ++} ++ ++u8 ++acx_signal_determine_quality(u8 signal, u8 noise) ++{ ++ int qual; ++ ++ qual = (((signal - 30) * 100 / 70) + (100 - noise * 4)) / 2; ++ ++ if (qual > 100) ++ return 100; ++ if (qual < 0) ++ return 0; ++ return qual; ++} ++ ++ ++/*********************************************************************** ++** Interrogate/configure commands ++*/ ++ ++/* FIXME: the lengths given here probably aren't always correct. ++ * They should be gradually replaced by proper "sizeof(acx1XX_ie_XXXX)-4", ++ * unless the firmware actually expects a different length than the struct length */ ++static const u16 ++acx100_ie_len[] = { ++ 0, ++ ACX100_IE_ACX_TIMER_LEN, ++ sizeof(acx100_ie_powersave_t)-4, /* is that 6 or 8??? */ ++ ACX1xx_IE_QUEUE_CONFIG_LEN, ++ ACX100_IE_BLOCK_SIZE_LEN, ++ ACX1xx_IE_MEMORY_CONFIG_OPTIONS_LEN, ++ ACX1xx_IE_RATE_FALLBACK_LEN, ++ ACX100_IE_WEP_OPTIONS_LEN, ++ ACX1xx_IE_MEMORY_MAP_LEN, /* ACX1xx_IE_SSID_LEN, */ ++ 0, ++ ACX1xx_IE_ASSOC_ID_LEN, ++ 0, ++ ACX111_IE_CONFIG_OPTIONS_LEN, ++ ACX1xx_IE_FWREV_LEN, ++ ACX1xx_IE_FCS_ERROR_COUNT_LEN, ++ ACX1xx_IE_MEDIUM_USAGE_LEN, ++ ACX1xx_IE_RXCONFIG_LEN, ++ 0, ++ 0, ++ sizeof(fw_stats_t)-4, ++ 0, ++ ACX1xx_IE_FEATURE_CONFIG_LEN, ++ ACX111_IE_KEY_CHOOSE_LEN, ++ ACX1FF_IE_MISC_CONFIG_TABLE_LEN, ++ ACX1FF_IE_WONE_CONFIG_LEN, ++ 0, ++ ACX1FF_IE_TID_CONFIG_LEN, ++ 0, ++ 0, ++ 0, ++ ACX1FF_IE_CALIB_ASSESSMENT_LEN, ++ ACX1FF_IE_BEACON_FILTER_OPTIONS_LEN, ++ ACX1FF_IE_LOW_RSSI_THRESH_OPT_LEN, ++ ACX1FF_IE_NOISE_HISTOGRAM_RESULTS_LEN, ++ 0, ++ ACX1FF_IE_PACKET_DETECT_THRESH_LEN, ++ ACX1FF_IE_TX_CONFIG_OPTIONS_LEN, ++ ACX1FF_IE_CCA_THRESHOLD_LEN, ++ ACX1FF_IE_EVENT_MASK_LEN, ++ ACX1FF_IE_DTIM_PERIOD_LEN, ++ 0, ++ ACX1FF_IE_ACI_CONFIG_SET_LEN, ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, ++ ACX1FF_IE_EEPROM_VER_LEN, ++}; ++ ++static const u16 ++acx100_ie_len_dot11[] = { ++ 0, ++ ACX1xx_IE_DOT11_STATION_ID_LEN, ++ 0, ++ ACX100_IE_DOT11_BEACON_PERIOD_LEN, ++ ACX1xx_IE_DOT11_DTIM_PERIOD_LEN, ++ ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN, ++ ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN, ++ ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE_LEN, ++ ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN, ++ 0, ++ ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN_LEN, ++ ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN, ++ 0, ++ ACX1xx_IE_DOT11_TX_POWER_LEVEL_LEN, ++ ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN, ++ ACX100_IE_DOT11_ED_THRESHOLD_LEN, ++ ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET_LEN, ++ 0, ++ 0, ++ 0, ++}; ++ ++static const u16 ++acx111_ie_len[] = { ++ 0, ++ ACX100_IE_ACX_TIMER_LEN, ++ sizeof(acx111_ie_powersave_t)-4, ++ ACX1xx_IE_QUEUE_CONFIG_LEN, ++ ACX100_IE_BLOCK_SIZE_LEN, ++ ACX1xx_IE_MEMORY_CONFIG_OPTIONS_LEN, ++ ACX1xx_IE_RATE_FALLBACK_LEN, ++ ACX100_IE_WEP_OPTIONS_LEN, ++ ACX1xx_IE_MEMORY_MAP_LEN, /* ACX1xx_IE_SSID_LEN, */ ++ 0, ++ ACX1xx_IE_ASSOC_ID_LEN, ++ 0, ++ ACX111_IE_CONFIG_OPTIONS_LEN, ++ ACX1xx_IE_FWREV_LEN, ++ ACX1xx_IE_FCS_ERROR_COUNT_LEN, ++ ACX1xx_IE_MEDIUM_USAGE_LEN, ++ ACX1xx_IE_RXCONFIG_LEN, ++ 0, ++ 0, ++ sizeof(fw_stats_t)-4, ++ 0, ++ ACX1xx_IE_FEATURE_CONFIG_LEN, ++ ACX111_IE_KEY_CHOOSE_LEN, ++ ACX1FF_IE_MISC_CONFIG_TABLE_LEN, ++ ACX1FF_IE_WONE_CONFIG_LEN, ++ 0, ++ ACX1FF_IE_TID_CONFIG_LEN, ++ 0, ++ 0, ++ 0, ++ ACX1FF_IE_CALIB_ASSESSMENT_LEN, ++ ACX1FF_IE_BEACON_FILTER_OPTIONS_LEN, ++ ACX1FF_IE_LOW_RSSI_THRESH_OPT_LEN, ++ ACX1FF_IE_NOISE_HISTOGRAM_RESULTS_LEN, ++ 0, ++ ACX1FF_IE_PACKET_DETECT_THRESH_LEN, ++ ACX1FF_IE_TX_CONFIG_OPTIONS_LEN, ++ ACX1FF_IE_CCA_THRESHOLD_LEN, ++ ACX1FF_IE_EVENT_MASK_LEN, ++ ACX1FF_IE_DTIM_PERIOD_LEN, ++ 0, ++ ACX1FF_IE_ACI_CONFIG_SET_LEN, ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, ++ ACX1FF_IE_EEPROM_VER_LEN, ++}; ++ ++static const u16 ++acx111_ie_len_dot11[] = { ++ 0, ++ ACX1xx_IE_DOT11_STATION_ID_LEN, ++ 0, ++ ACX100_IE_DOT11_BEACON_PERIOD_LEN, ++ ACX1xx_IE_DOT11_DTIM_PERIOD_LEN, ++ ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN, ++ ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN, ++ ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE_LEN, ++ ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN, ++ 0, ++ ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN_LEN, ++ ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN, ++ 0, ++ ACX1xx_IE_DOT11_TX_POWER_LEVEL_LEN, ++ ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN, ++ ACX100_IE_DOT11_ED_THRESHOLD_LEN, ++ ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET_LEN, ++ 0, ++ 0, ++ 0, ++}; ++ ++ ++#undef FUNC ++#define FUNC "configure" ++#if !ACX_DEBUG ++int ++acx_s_configure(acx_device_t *adev, void *pdr, int type) ++{ ++#else ++int ++acx_s_configure_debug(acx_device_t *adev, void *pdr, int type, const char* typestr) ++{ ++#endif ++ u16 len; ++ int res; ++ ++ if (type < 0x1000) ++ len = adev->ie_len[type]; ++ else ++ len = adev->ie_len_dot11[type - 0x1000]; ++ ++ log(L_CTL, FUNC"(type:%s,len:%u)\n", typestr, len); ++ if (unlikely(!len)) { ++ log(L_DEBUG, "zero-length type %s?!\n", typestr); ++ } ++ ++ ((acx_ie_generic_t *)pdr)->type = cpu_to_le16(type); ++ ((acx_ie_generic_t *)pdr)->len = cpu_to_le16(len); ++ res = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIGURE, pdr, len + 4); ++ if (unlikely(OK != res)) { ++#if ACX_DEBUG ++ printk("%s: "FUNC"(type:%s) FAILED\n", adev->ndev->name, typestr); ++#else ++ printk("%s: "FUNC"(type:0x%X) FAILED\n", adev->ndev->name, type); ++#endif ++ /* dump_stack() is already done in issue_cmd() */ ++ } ++ return res; ++} ++ ++#undef FUNC ++#define FUNC "interrogate" ++#if !ACX_DEBUG ++int ++acx_s_interrogate(acx_device_t *adev, void *pdr, int type) ++{ ++#else ++int ++acx_s_interrogate_debug(acx_device_t *adev, void *pdr, int type, ++ const char* typestr) ++{ ++#endif ++ u16 len; ++ int res; ++ ++ /* FIXME: no check whether this exceeds the array yet. ++ * We should probably remember the number of entries... */ ++ if (type < 0x1000) ++ len = adev->ie_len[type]; ++ else ++ len = adev->ie_len_dot11[type-0x1000]; ++ ++ log(L_CTL, FUNC"(type:%s,len:%u)\n", typestr, len); ++ ++ ((acx_ie_generic_t *)pdr)->type = cpu_to_le16(type); ++ ((acx_ie_generic_t *)pdr)->len = cpu_to_le16(len); ++ res = acx_s_issue_cmd(adev, ACX1xx_CMD_INTERROGATE, pdr, len + 4); ++ if (unlikely(OK != res)) { ++#if ACX_DEBUG ++ printk("%s: "FUNC"(type:%s) FAILED\n", adev->ndev->name, typestr); ++#else ++ printk("%s: "FUNC"(type:0x%X) FAILED\n", adev->ndev->name, type); ++#endif ++ /* dump_stack() is already done in issue_cmd() */ ++ } ++ return res; ++} ++ ++#if CMD_DISCOVERY ++void ++great_inquisitor(acx_device_t *adev) ++{ ++ static struct { ++ u16 type; ++ u16 len; ++ /* 0x200 was too large here: */ ++ u8 data[0x100 - 4]; ++ } ACX_PACKED ie; ++ u16 type; ++ ++ FN_ENTER; ++ ++ /* 0..0x20, 0x1000..0x1020 */ ++ for (type = 0; type <= 0x1020; type++) { ++ if (type == 0x21) ++ type = 0x1000; ++ ie.type = cpu_to_le16(type); ++ ie.len = cpu_to_le16(sizeof(ie) - 4); ++ acx_s_issue_cmd(adev, ACX1xx_CMD_INTERROGATE, &ie, sizeof(ie)); ++ } ++ FN_EXIT0; ++} ++#endif ++ ++ ++#ifdef CONFIG_PROC_FS ++/*********************************************************************** ++** /proc files ++*/ ++/*********************************************************************** ++** acx_l_proc_output ++** Generate content for our /proc entry ++** ++** Arguments: ++** buf is a pointer to write output to ++** adev is the usual pointer to our private struct acx_device ++** Returns: ++** number of bytes actually written to buf ++** Side effects: ++** none ++*/ ++static int ++acx_l_proc_output(char *buf, acx_device_t *adev) ++{ ++ char *p = buf; ++ int i; ++ ++ FN_ENTER; ++ ++ p += sprintf(p, ++ "acx driver version:\t\t" ACX_RELEASE "\n" ++ "Wireless extension version:\t" STRING(WIRELESS_EXT) "\n" ++ "chip name:\t\t\t%s (0x%08X)\n" ++ "radio type:\t\t\t0x%02X\n" ++ "form factor:\t\t\t0x%02X\n" ++ "EEPROM version:\t\t\t0x%02X\n" ++ "firmware version:\t\t%s (0x%08X)\n", ++ adev->chip_name, adev->firmware_id, ++ adev->radio_type, ++ adev->form_factor, ++ adev->eeprom_version, ++ adev->firmware_version, adev->firmware_numver); ++ ++ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { ++ struct client *bss = &adev->sta_list[i]; ++ if (!bss->used) continue; ++ p += sprintf(p, "BSS %u BSSID "MACSTR" ESSID %s channel %u " ++ "Cap 0x%X SIR %u SNR %u\n", ++ i, MAC(bss->bssid), (char*)bss->essid, bss->channel, ++ bss->cap_info, bss->sir, bss->snr); ++ } ++ p += sprintf(p, "status:\t\t\t%u (%s)\n", ++ adev->status, acx_get_status_name(adev->status)); ++ ++ FN_EXIT1(p - buf); ++ return p - buf; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_s_proc_diag_output(char *buf, acx_device_t *adev) ++{ ++ char *p = buf; ++ unsigned long flags; ++ unsigned int len = 0, partlen; ++ u32 temp1, temp2; ++ u8 *st, *st_end; ++#ifdef __BIG_ENDIAN ++ u8 *st2; ++#endif ++ fw_stats_t *fw_stats; ++ char *part_str = NULL; ++ fw_stats_tx_t *tx = NULL; ++ fw_stats_rx_t *rx = NULL; ++ fw_stats_dma_t *dma = NULL; ++ fw_stats_irq_t *irq = NULL; ++ fw_stats_wep_t *wep = NULL; ++ fw_stats_pwr_t *pwr = NULL; ++ fw_stats_mic_t *mic = NULL; ++ fw_stats_aes_t *aes = NULL; ++ fw_stats_event_t *evt = NULL; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ ++#if defined (ACX_MEM) ++ p = acxmem_s_proc_diag_output(p, adev); ++#else ++ if (IS_PCI(adev)) ++ p = acxpci_s_proc_diag_output(p, adev); ++#endif ++ ++ p += sprintf(p, ++ "\n" ++ "** network status **\n" ++ "dev_state_mask 0x%04X\n" ++ "status %u (%s), " ++ "mode %u, channel %u, " ++ "reg_dom_id 0x%02X, reg_dom_chanmask 0x%04X, ", ++ adev->dev_state_mask, ++ adev->status, acx_get_status_name(adev->status), ++ adev->mode, adev->channel, ++ adev->reg_dom_id, adev->reg_dom_chanmask ++ ); ++ p += sprintf(p, ++ "ESSID \"%s\", essid_active %d, essid_len %d, " ++ "essid_for_assoc \"%s\", nick \"%s\"\n" ++ "WEP ena %d, restricted %d, idx %d\n", ++ adev->essid, adev->essid_active, (int)adev->essid_len, ++ adev->essid_for_assoc, adev->nick, ++ adev->wep_enabled, adev->wep_restricted, ++ adev->wep_current_index); ++ p += sprintf(p, "dev_addr "MACSTR"\n", MAC(adev->dev_addr)); ++ p += sprintf(p, "bssid "MACSTR"\n", MAC(adev->bssid)); ++ p += sprintf(p, "ap_filter "MACSTR"\n", MAC(adev->ap)); ++ ++ p += sprintf(p, ++ "\n" ++ "** PHY status **\n" ++ "tx_disabled %d, tx_level_dbm %d\n" /* "tx_level_val %d, tx_level_auto %d\n" */ ++ "sensitivity %d, antenna 0x%02X, ed_threshold %d, cca %d, preamble_mode %d\n" ++ "rate_basic 0x%04X, rate_oper 0x%04X\n" ++ "rts_threshold %d, frag_threshold %d, short_retry %d, long_retry %d\n" ++ "msdu_lifetime %d, listen_interval %d, beacon_interval %d\n", ++ adev->tx_disabled, adev->tx_level_dbm, /* adev->tx_level_val, adev->tx_level_auto, */ ++ adev->sensitivity, adev->antenna, adev->ed_threshold, adev->cca, adev->preamble_mode, ++ adev->rate_basic, adev->rate_oper, ++ adev->rts_threshold, adev->frag_threshold, adev->short_retry, adev->long_retry, ++ adev->msdu_lifetime, adev->listen_interval, adev->beacon_interval); ++ ++ acx_unlock(adev, flags); ++ ++ p += sprintf(p, ++ "\n" ++ "** Firmware **\n" ++ "NOTE: version dependent statistics layout, " ++ "please report if you suspect wrong parsing!\n" ++ "\n" ++ "version \"%s\"\n", adev->firmware_version); ++ ++ /* TODO: may replace kmalloc/memset with kzalloc once ++ * Linux 2.6.14 is widespread */ ++ fw_stats = kmalloc(sizeof(*fw_stats), GFP_KERNEL); ++ if (!fw_stats) { ++ FN_EXIT1(0); ++ return 0; ++ } ++ memset(fw_stats, 0, sizeof(*fw_stats)); ++ ++ st = (u8 *)fw_stats; ++ ++ part_str = "statistics query command"; ++ ++ if (OK != acx_s_interrogate(adev, st, ACX1xx_IE_FIRMWARE_STATISTICS)) ++ goto fw_stats_end; ++ ++ st += sizeof(u16); ++ len = *(u16 *)st; ++ ++ if (len > sizeof(*fw_stats)) { ++ p += sprintf(p, ++ "firmware version with bigger fw_stats struct detected\n" ++ "(%u vs. %u), please report\n", len, sizeof(fw_stats_t)); ++ if (len > sizeof(*fw_stats)) { ++ p += sprintf(p, "struct size exceeded allocation!\n"); ++ len = sizeof(*fw_stats); ++ } ++ } ++ st += sizeof(u16); ++ st_end = st - 2*sizeof(u16) + len; ++ ++#ifdef __BIG_ENDIAN ++ /* let's make one bold assumption here: ++ * (hopefully!) *all* statistics fields are u32 only, ++ * thus if we need to make endianness corrections ++ * we can simply do them in one go, in advance */ ++ st2 = (u8 *)fw_stats; ++ for (temp1 = 0; temp1 < len; temp1 += 4, st2 += 4) ++ *(u32 *)st2 = le32_to_cpu(*(u32 *)st2); ++#endif ++ ++ part_str = "Rx/Tx"; ++ ++ /* directly at end of a struct part? --> no error! */ ++ if (st == st_end) ++ goto fw_stats_end; ++ ++ tx = (fw_stats_tx_t *)st; ++ st += sizeof(fw_stats_tx_t); ++ rx = (fw_stats_rx_t *)st; ++ st += sizeof(fw_stats_rx_t); ++ partlen = sizeof(fw_stats_tx_t) + sizeof(fw_stats_rx_t); ++ ++ if (IS_ACX100(adev)) { ++ /* at least ACX100 PCI F/W 1.9.8.b ++ * and ACX100 USB F/W 1.0.7-USB ++ * don't have those two fields... */ ++ st -= 2*sizeof(u32); ++ ++ /* our parsing doesn't quite match this firmware yet, ++ * log failure */ ++ if (st > st_end) ++ goto fw_stats_fail; ++ temp1 = temp2 = 999999999; ++ } else { ++ if (st > st_end) ++ goto fw_stats_fail; ++ temp1 = rx->rx_aci_events; ++ temp2 = rx->rx_aci_resets; ++ } ++ ++ p += sprintf(p, ++ "%s:\n" ++ " tx_desc_overfl %u\n" ++ " rx_OutOfMem %u, rx_hdr_overfl %u, rx_hw_stuck %u\n" ++ " rx_dropped_frame %u, rx_frame_ptr_err %u, rx_xfr_hint_trig %u\n" ++ " rx_aci_events %u, rx_aci_resets %u\n", ++ part_str, ++ tx->tx_desc_of, ++ rx->rx_oom, ++ rx->rx_hdr_of, ++ rx->rx_hw_stuck, ++ rx->rx_dropped_frame, ++ rx->rx_frame_ptr_err, ++ rx->rx_xfr_hint_trig, ++ temp1, ++ temp2); ++ ++ part_str = "DMA"; ++ ++ if (st == st_end) ++ goto fw_stats_end; ++ ++ dma = (fw_stats_dma_t *)st; ++ partlen = sizeof(fw_stats_dma_t); ++ st += partlen; ++ ++ if (st > st_end) ++ goto fw_stats_fail; ++ ++ p += sprintf(p, ++ "%s:\n" ++ " rx_dma_req %u, rx_dma_err %u, tx_dma_req %u, tx_dma_err %u\n", ++ part_str, ++ dma->rx_dma_req, ++ dma->rx_dma_err, ++ dma->tx_dma_req, ++ dma->tx_dma_err); ++ ++ part_str = "IRQ"; ++ ++ if (st == st_end) ++ goto fw_stats_end; ++ ++ irq = (fw_stats_irq_t *)st; ++ partlen = sizeof(fw_stats_irq_t); ++ st += partlen; ++ ++ if (st > st_end) ++ goto fw_stats_fail; ++ ++ p += sprintf(p, ++ "%s:\n" ++ " cmd_cplt %u, fiq %u\n" ++ " rx_hdrs %u, rx_cmplt %u, rx_mem_overfl %u, rx_rdys %u\n" ++ " irqs %u, tx_procs %u, decrypt_done %u\n" ++ " dma_0_done %u, dma_1_done %u, tx_exch_complet %u\n" ++ " commands %u, rx_procs %u, hw_pm_mode_changes %u\n" ++ " host_acks %u, pci_pm %u, acm_wakeups %u\n", ++ part_str, ++ irq->cmd_cplt, ++ irq->fiq, ++ irq->rx_hdrs, ++ irq->rx_cmplt, ++ irq->rx_mem_of, ++ irq->rx_rdys, ++ irq->irqs, ++ irq->tx_procs, ++ irq->decrypt_done, ++ irq->dma_0_done, ++ irq->dma_1_done, ++ irq->tx_exch_complet, ++ irq->commands, ++ irq->rx_procs, ++ irq->hw_pm_mode_changes, ++ irq->host_acks, ++ irq->pci_pm, ++ irq->acm_wakeups); ++ ++ part_str = "WEP"; ++ ++ if (st == st_end) ++ goto fw_stats_end; ++ ++ wep = (fw_stats_wep_t *)st; ++ partlen = sizeof(fw_stats_wep_t); ++ st += partlen; ++ ++ if ( ++ (IS_PCI(adev) && IS_ACX100(adev)) ++ || (IS_USB(adev) && IS_ACX100(adev)) ++ || (IS_MEM(adev) && IS_ACX100(adev)) ++ ) { ++ /* at least ACX100 PCI F/W 1.9.8.b, ++ * ACX100 USB F/W 1.0.7-USB ++ * and ACX100 Generic Slave F/W 1.10.7.K ++ * don't have those two fields... ++ */ ++ st -= 2*sizeof(u32); ++ if (st > st_end) ++ goto fw_stats_fail; ++ temp1 = temp2 = 999999999; ++ } else { ++ if (st > st_end) ++ goto fw_stats_fail; ++ temp1 = wep->wep_pkt_decrypt; ++ temp2 = wep->wep_decrypt_irqs; ++ } ++ ++ p += sprintf(p, ++ "%s:\n" ++ " wep_key_count %u, wep_default_key_count %u, dot11_def_key_mib %u\n" ++ " wep_key_not_found %u, wep_decrypt_fail %u\n" ++ " wep_pkt_decrypt %u, wep_decrypt_irqs %u\n", ++ part_str, ++ wep->wep_key_count, ++ wep->wep_default_key_count, ++ wep->dot11_def_key_mib, ++ wep->wep_key_not_found, ++ wep->wep_decrypt_fail, ++ temp1, ++ temp2); ++ ++ part_str = "power"; ++ ++ if (st == st_end) ++ goto fw_stats_end; ++ ++ pwr = (fw_stats_pwr_t *)st; ++ partlen = sizeof(fw_stats_pwr_t); ++ st += partlen; ++ ++ if (st > st_end) ++ goto fw_stats_fail; ++ ++ p += sprintf(p, ++ "%s:\n" ++ " tx_start_ctr %u, no_ps_tx_too_short %u\n" ++ " rx_start_ctr %u, no_ps_rx_too_short %u\n" ++ " lppd_started %u\n" ++ " no_lppd_too_noisy %u, no_lppd_too_short %u, no_lppd_matching_frame %u\n", ++ part_str, ++ pwr->tx_start_ctr, ++ pwr->no_ps_tx_too_short, ++ pwr->rx_start_ctr, ++ pwr->no_ps_rx_too_short, ++ pwr->lppd_started, ++ pwr->no_lppd_too_noisy, ++ pwr->no_lppd_too_short, ++ pwr->no_lppd_matching_frame); ++ ++ part_str = "MIC"; ++ ++ if (st == st_end) ++ goto fw_stats_end; ++ ++ mic = (fw_stats_mic_t *)st; ++ partlen = sizeof(fw_stats_mic_t); ++ st += partlen; ++ ++ if (st > st_end) ++ goto fw_stats_fail; ++ ++ p += sprintf(p, ++ "%s:\n" ++ " mic_rx_pkts %u, mic_calc_fail %u\n", ++ part_str, ++ mic->mic_rx_pkts, ++ mic->mic_calc_fail); ++ ++ part_str = "AES"; ++ ++ if (st == st_end) ++ goto fw_stats_end; ++ ++ aes = (fw_stats_aes_t *)st; ++ partlen = sizeof(fw_stats_aes_t); ++ st += partlen; ++ ++ if (st > st_end) ++ goto fw_stats_fail; ++ ++ p += sprintf(p, ++ "%s:\n" ++ " aes_enc_fail %u, aes_dec_fail %u\n" ++ " aes_enc_pkts %u, aes_dec_pkts %u\n" ++ " aes_enc_irq %u, aes_dec_irq %u\n", ++ part_str, ++ aes->aes_enc_fail, ++ aes->aes_dec_fail, ++ aes->aes_enc_pkts, ++ aes->aes_dec_pkts, ++ aes->aes_enc_irq, ++ aes->aes_dec_irq); ++ ++ part_str = "event"; ++ ++ if (st == st_end) ++ goto fw_stats_end; ++ ++ evt = (fw_stats_event_t *)st; ++ partlen = sizeof(fw_stats_event_t); ++ st += partlen; ++ ++ if (st > st_end) ++ goto fw_stats_fail; ++ ++ p += sprintf(p, ++ "%s:\n" ++ " heartbeat %u, calibration %u\n" ++ " rx_mismatch %u, rx_mem_empty %u, rx_pool %u\n" ++ " oom_late %u\n" ++ " phy_tx_err %u, tx_stuck %u\n", ++ part_str, ++ evt->heartbeat, ++ evt->calibration, ++ evt->rx_mismatch, ++ evt->rx_mem_empty, ++ evt->rx_pool, ++ evt->oom_late, ++ evt->phy_tx_err, ++ evt->tx_stuck); ++ ++ if (st < st_end) ++ goto fw_stats_bigger; ++ ++ goto fw_stats_end; ++ ++fw_stats_fail: ++ st -= partlen; ++ p += sprintf(p, ++ "failed at %s part (size %u), offset %u (struct size %u), " ++ "please report\n", part_str, partlen, ++ (int)st - (int)fw_stats, len); ++ ++fw_stats_bigger: ++ for (; st < st_end; st += 4) ++ p += sprintf(p, ++ "UNKN%3d: %u\n", (int)st - (int)fw_stats, *(u32 *)st); ++ ++fw_stats_end: ++ kfree(fw_stats); ++ ++ FN_EXIT1(p - buf); ++ return p - buf; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_s_proc_phy_output(char *buf, acx_device_t *adev) ++{ ++ char *p = buf; ++ int i; ++ ++ FN_ENTER; ++ ++ /* ++ if (RADIO_RFMD_11 != adev->radio_type) { ++ printk("sorry, not yet adapted for radio types " ++ "other than RFMD, please verify " ++ "PHY size etc. first!\n"); ++ goto end; ++ } ++ */ ++ ++ /* The PHY area is only 0x80 bytes long; further pages after that ++ * only have some page number registers with altered value, ++ * all other registers remain the same. */ ++ for (i = 0; i < 0x80; i++) { ++ acx_s_read_phy_reg(adev, i, p++); ++ } ++ ++ FN_EXIT1(p - buf); ++ return p - buf; ++} ++ ++ ++/*********************************************************************** ++** acx_e_read_proc_XXXX ++** Handle our /proc entry ++** ++** Arguments: ++** standard kernel read_proc interface ++** Returns: ++** number of bytes written to buf ++** Side effects: ++** none ++*/ ++static int ++acx_e_read_proc(char *buf, char **start, off_t offset, int count, ++ int *eof, void *data) ++{ ++ acx_device_t *adev = (acx_device_t*)data; ++ unsigned long flags; ++ int length; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ acx_lock(adev, flags); ++ /* fill buf */ ++ length = acx_l_proc_output(buf, adev); ++ acx_unlock(adev, flags); ++ acx_sem_unlock(adev); ++ ++ /* housekeeping */ ++ if (length <= offset + count) ++ *eof = 1; ++ *start = buf + offset; ++ length -= offset; ++ if (length > count) ++ length = count; ++ if (length < 0) ++ length = 0; ++ FN_EXIT1(length); ++ return length; ++} ++ ++static char _buf[32768]; ++static int ++acx_e_read_proc_diag(char *buf, char **start, off_t offset, int count, ++ int *eof, void *data) ++{ ++ acx_device_t *adev = (acx_device_t*)data; ++ int length; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ /* fill buf */ ++ length = acx_s_proc_diag_output(_buf, adev); ++ acx_sem_unlock(adev); ++ ++ memcpy(buf, _buf + offset, count); ++ ++ /* housekeeping */ ++ if (length <= offset + count) ++ *eof = 1; ++ *start = count; ++ length -= offset; ++ if (length > count) ++ length = count; ++ if (length < 0) ++ length = 0; ++ FN_EXIT1(length); ++ return length; ++} ++ ++static int ++acx_e_read_proc_eeprom(char *buf, char **start, off_t offset, int count, ++ int *eof, void *data) ++{ ++ acx_device_t *adev = (acx_device_t*)data; ++ int length; ++ ++ FN_ENTER; ++ ++ /* fill buf */ ++ length = 0; ++#if defined (ACX_MEM) ++ acx_sem_lock(adev); ++ length = acxmem_proc_eeprom_output(buf, adev); ++ acx_sem_unlock(adev); ++#else ++ if (IS_PCI(adev)) { ++ acx_sem_lock(adev); ++ length = acxpci_proc_eeprom_output(buf, adev); ++ acx_sem_unlock(adev); ++ } ++#endif ++ ++ /* housekeeping */ ++ if (length <= offset + count) ++ *eof = 1; ++ *start = buf + offset; ++ length -= offset; ++ if (length > count) ++ length = count; ++ if (length < 0) ++ length = 0; ++ FN_EXIT1(length); ++ return length; ++} ++ ++static int ++acx_e_read_proc_phy(char *buf, char **start, off_t offset, int count, ++ int *eof, void *data) ++{ ++ acx_device_t *adev = (acx_device_t*)data; ++ int length; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ /* fill buf */ ++ length = acx_s_proc_phy_output(buf, adev); ++ acx_sem_unlock(adev); ++ ++ /* housekeeping */ ++ if (length <= offset + count) ++ *eof = 1; ++ *start = buf + offset; ++ length -= offset; ++ if (length > count) ++ length = count; ++ if (length < 0) ++ length = 0; ++ FN_EXIT1(length); ++ return length; ++} ++ ++ ++/*********************************************************************** ++** /proc files registration ++*/ ++static const char * const ++proc_files[] = { "", "_diag", "_eeprom", "_phy" }; ++ ++static read_proc_t * const ++proc_funcs[] = { ++ acx_e_read_proc, ++ acx_e_read_proc_diag, ++ acx_e_read_proc_eeprom, ++ acx_e_read_proc_phy ++}; ++ ++static int ++manage_proc_entries(const struct net_device *ndev, int remove) ++{ ++ acx_device_t *adev = ndev2adev((struct net_device *)ndev); ++ char procbuf[80]; ++ int i; ++ ++ for (i = 0; i < VEC_SIZE(proc_files); i++) { ++ snprintf(procbuf, sizeof(procbuf), ++ "driver/acx_%s%s", ndev->name, proc_files[i]); ++ log(L_INIT, "%sing /proc entry %s\n", ++ remove ? "remov" : "creat", procbuf); ++ if (!remove) { ++ if (!create_proc_read_entry(procbuf, 0, 0, proc_funcs[i], adev)) { ++ printk("acx: cannot register /proc entry %s\n", procbuf); ++ return NOT_OK; ++ } ++ } else { ++ remove_proc_entry(procbuf, NULL); ++ } ++ } ++ return OK; ++} ++ ++int ++acx_proc_register_entries(const struct net_device *ndev) ++{ ++ return manage_proc_entries(ndev, 0); ++} ++ ++int ++acx_proc_unregister_entries(const struct net_device *ndev) ++{ ++ return manage_proc_entries(ndev, 1); ++} ++#endif /* CONFIG_PROC_FS */ ++ ++ ++/*********************************************************************** ++** acx_cmd_join_bssid ++** ++** Common code for both acx100 and acx111. ++*/ ++/* NB: does NOT match RATE100_nn but matches ACX[111]_SCAN_RATE_n */ ++static const u8 ++bitpos2genframe_txrate[] = { ++ 10, /* 0. 1 Mbit/s */ ++ 20, /* 1. 2 Mbit/s */ ++ 55, /* 2. 5.5 Mbit/s */ ++ 0x0B, /* 3. 6 Mbit/s */ ++ 0x0F, /* 4. 9 Mbit/s */ ++ 110, /* 5. 11 Mbit/s */ ++ 0x0A, /* 6. 12 Mbit/s */ ++ 0x0E, /* 7. 18 Mbit/s */ ++ 220, /* 8. 22 Mbit/s */ ++ 0x09, /* 9. 24 Mbit/s */ ++ 0x0D, /* 10. 36 Mbit/s */ ++ 0x08, /* 11. 48 Mbit/s */ ++ 0x0C, /* 12. 54 Mbit/s */ ++ 10, /* 13. 1 Mbit/s, should never happen */ ++ 10, /* 14. 1 Mbit/s, should never happen */ ++ 10, /* 15. 1 Mbit/s, should never happen */ ++}; ++ ++/* Looks scary, eh? ++** Actually, each one compiled into one AND and one SHIFT, ++** 31 bytes in x86 asm (more if uints are replaced by u16/u8) */ ++static inline unsigned int ++rate111to5bits(unsigned int rate) ++{ ++ return (rate & 0x7) ++ | ( (rate & RATE111_11) / (RATE111_11/JOINBSS_RATES_11) ) ++ | ( (rate & RATE111_22) / (RATE111_22/JOINBSS_RATES_22) ) ++ ; ++} ++ ++static void ++acx_s_cmd_join_bssid(acx_device_t *adev, const u8 *bssid) ++{ ++ acx_joinbss_t tmp; ++ int dtim_interval; ++ int i; ++ ++ if (mac_is_zero(bssid)) ++ return; ++ ++ FN_ENTER; ++ ++ dtim_interval = (ACX_MODE_0_ADHOC == adev->mode) ? ++ 1 : adev->dtim_interval; ++ ++ memset(&tmp, 0, sizeof(tmp)); ++ ++ for (i = 0; i < ETH_ALEN; i++) { ++ tmp.bssid[i] = bssid[ETH_ALEN-1 - i]; ++ } ++ ++ tmp.beacon_interval = cpu_to_le16(adev->beacon_interval); ++ ++ /* Basic rate set. Control frame responses (such as ACK or CTS frames) ++ ** are sent with one of these rates */ ++ if (IS_ACX111(adev)) { ++ /* It was experimentally determined that rates_basic ++ ** can take 11g rates as well, not only rates ++ ** defined with JOINBSS_RATES_BASIC111_nnn. ++ ** Just use RATE111_nnn constants... */ ++ tmp.u.acx111.dtim_interval = dtim_interval; ++ tmp.u.acx111.rates_basic = cpu_to_le16(adev->rate_basic); ++ log(L_ASSOC, "rates_basic:%04X, rates_supported:%04X\n", ++ adev->rate_basic, adev->rate_oper); ++ } else { ++ tmp.u.acx100.dtim_interval = dtim_interval; ++ tmp.u.acx100.rates_basic = rate111to5bits(adev->rate_basic); ++ tmp.u.acx100.rates_supported = rate111to5bits(adev->rate_oper); ++ log(L_ASSOC, "rates_basic:%04X->%02X, " ++ "rates_supported:%04X->%02X\n", ++ adev->rate_basic, tmp.u.acx100.rates_basic, ++ adev->rate_oper, tmp.u.acx100.rates_supported); ++ } ++ ++ /* Setting up how Beacon, Probe Response, RTS, and PS-Poll frames ++ ** will be sent (rate/modulation/preamble) */ ++ tmp.u.txrate.genfrm_txrate = bitpos2genframe_txrate[lowest_bit(adev->rate_basic)]; ++ tmp.genfrm_mod_pre = 0; /* FIXME: was = adev->capab_short (which was always 0); */ ++ /* we can use short pre *if* all peers can understand it */ ++ /* FIXME #2: we need to correctly set PBCC/OFDM bits here too */ ++ ++ /* we switch fw to STA mode in MONITOR mode, it seems to be ++ ** the only mode where fw does not emit beacons by itself ++ ** but allows us to send anything (we really want to retain ++ ** ability to tx arbitrary frames in MONITOR mode) ++ */ ++ tmp.macmode = (adev->mode != ACX_MODE_MONITOR ? adev->mode : ACX_MODE_2_STA); ++ tmp.channel = adev->channel; ++ tmp.essid_len = adev->essid_len; ++ /* NOTE: the code memcpy'd essid_len + 1 before, which is WRONG! */ ++ memcpy(tmp.essid, adev->essid, tmp.essid_len); ++ acx_s_issue_cmd(adev, ACX1xx_CMD_JOIN, &tmp, tmp.essid_len + 0x11); ++ ++ log(L_ASSOC|L_DEBUG, "BSS_Type = %u\n", tmp.macmode); ++ acxlog_mac(L_ASSOC|L_DEBUG, "JoinBSSID MAC:", adev->bssid, "\n"); ++ ++ acx_update_capabilities(adev); ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_s_cmd_start_scan ++** ++** Issue scan command to the hardware ++** ++** unified function for both ACX111 and ACX100 ++*/ ++static void ++acx_s_scan_chan(acx_device_t *adev) ++{ ++ union { ++ acx111_scan_t acx111; ++ acx100_scan_t acx100; ++ } s; ++ ++ FN_ENTER; ++ ++ memset(&s, 0, sizeof(s)); ++ ++ /* first common positions... */ ++ ++ s.acx111.count = cpu_to_le16(adev->scan_count); ++ s.acx111.rate = adev->scan_rate; ++ s.acx111.options = adev->scan_mode; ++ s.acx111.chan_duration = cpu_to_le16(adev->scan_duration); ++ s.acx111.max_probe_delay = cpu_to_le16(adev->scan_probe_delay); ++ ++ /* ...then differences */ ++ ++ if (IS_ACX111(adev)) { ++ s.acx111.channel_list_select = 0; /* scan every allowed channel */ ++ /*s.acx111.channel_list_select = 1;*/ /* scan given channels */ ++ /*s.acx111.modulation = 0x40;*/ /* long preamble? OFDM? -> only for active scan */ ++ s.acx111.modulation = 0; ++ /*s.acx111.channel_list[0] = 6; ++ s.acx111.channel_list[1] = 4;*/ ++ } else { ++ s.acx100.start_chan = cpu_to_le16(1); ++ s.acx100.flags = cpu_to_le16(0x8000); ++ } ++ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_SCAN, &s, sizeof(s)); ++ FN_EXIT0; ++} ++ ++ ++void ++acx_s_cmd_start_scan(acx_device_t *adev) ++{ ++ /* time_before check is 'just in case' thing */ ++ if (!(adev->irq_status & HOST_INT_SCAN_COMPLETE) ++ && time_before(jiffies, adev->scan_start + 10*HZ) ++ ) { ++ log(L_INIT, "start_scan: seems like previous scan " ++ "is still running. Not starting anew. Please report\n"); ++ return; ++ } ++ ++ log(L_INIT, "starting radio scan\n"); ++ /* remember that fw is commanded to do scan */ ++ adev->scan_start = jiffies; ++ CLEAR_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); ++ /* issue it */ ++ acx_s_scan_chan(adev); ++} ++ ++ ++/*********************************************************************** ++** acx111 feature config ++*/ ++static int ++acx111_s_get_feature_config(acx_device_t *adev, ++ u32 *feature_options, u32 *data_flow_options) ++{ ++ struct acx111_ie_feature_config feat; ++ ++ if (!IS_ACX111(adev)) { ++ return NOT_OK; ++ } ++ ++ memset(&feat, 0, sizeof(feat)); ++ ++ if (OK != acx_s_interrogate(adev, &feat, ACX1xx_IE_FEATURE_CONFIG)) { ++ return NOT_OK; ++ } ++ log(L_DEBUG, ++ "got Feature option:0x%X, DataFlow option: 0x%X\n", ++ feat.feature_options, ++ feat.data_flow_options); ++ ++ if (feature_options) ++ *feature_options = le32_to_cpu(feat.feature_options); ++ if (data_flow_options) ++ *data_flow_options = le32_to_cpu(feat.data_flow_options); ++ ++ return OK; ++} ++ ++static int ++acx111_s_set_feature_config(acx_device_t *adev, ++ u32 feature_options, u32 data_flow_options, ++ unsigned int mode /* 0 == remove, 1 == add, 2 == set */) ++{ ++ struct acx111_ie_feature_config feat; ++ ++ if (!IS_ACX111(adev)) { ++ return NOT_OK; ++ } ++ ++ if ((mode < 0) || (mode > 2)) ++ return NOT_OK; ++ ++ if (mode != 2) ++ /* need to modify old data */ ++ acx111_s_get_feature_config(adev, &feat.feature_options, &feat.data_flow_options); ++ else { ++ /* need to set a completely new value */ ++ feat.feature_options = 0; ++ feat.data_flow_options = 0; ++ } ++ ++ if (mode == 0) { /* remove */ ++ CLEAR_BIT(feat.feature_options, cpu_to_le32(feature_options)); ++ CLEAR_BIT(feat.data_flow_options, cpu_to_le32(data_flow_options)); ++ } else { /* add or set */ ++ SET_BIT(feat.feature_options, cpu_to_le32(feature_options)); ++ SET_BIT(feat.data_flow_options, cpu_to_le32(data_flow_options)); ++ } ++ ++ log(L_DEBUG, ++ "old: feature 0x%08X dataflow 0x%08X. mode: %u\n" ++ "new: feature 0x%08X dataflow 0x%08X\n", ++ feature_options, data_flow_options, mode, ++ le32_to_cpu(feat.feature_options), ++ le32_to_cpu(feat.data_flow_options)); ++ ++ if (OK != acx_s_configure(adev, &feat, ACX1xx_IE_FEATURE_CONFIG)) { ++ return NOT_OK; ++ } ++ ++ return OK; ++} ++ ++static inline int ++acx111_s_feature_off(acx_device_t *adev, u32 f, u32 d) ++{ ++ return acx111_s_set_feature_config(adev, f, d, 0); ++} ++static inline int ++acx111_s_feature_on(acx_device_t *adev, u32 f, u32 d) ++{ ++ return acx111_s_set_feature_config(adev, f, d, 1); ++} ++static inline int ++acx111_s_feature_set(acx_device_t *adev, u32 f, u32 d) ++{ ++ return acx111_s_set_feature_config(adev, f, d, 2); ++} ++ ++ ++/*********************************************************************** ++** acx100_s_init_memory_pools ++*/ ++static int ++acx100_s_init_memory_pools(acx_device_t *adev, const acx_ie_memmap_t *mmt) ++{ ++ acx100_ie_memblocksize_t MemoryBlockSize; ++ acx100_ie_memconfigoption_t MemoryConfigOption; ++ int TotalMemoryBlocks; ++ int RxBlockNum; ++ int TotalRxBlockSize; ++ int TxBlockNum; ++ int TotalTxBlockSize; ++ ++ FN_ENTER; ++ ++ /* Let's see if we can follow this: ++ first we select our memory block size (which I think is ++ completely arbitrary) */ ++ MemoryBlockSize.size = cpu_to_le16(adev->memblocksize); ++ ++ /* Then we alert the card to our decision of block size */ ++ if (OK != acx_s_configure(adev, &MemoryBlockSize, ACX100_IE_BLOCK_SIZE)) { ++ goto bad; ++ } ++ ++ /* We figure out how many total blocks we can create, using ++ the block size we chose, and the beginning and ending ++ memory pointers, i.e.: end-start/size */ ++ TotalMemoryBlocks = (le32_to_cpu(mmt->PoolEnd) - le32_to_cpu(mmt->PoolStart)) / adev->memblocksize; ++ ++ log(L_DEBUG, "TotalMemoryBlocks=%u (%u bytes)\n", ++ TotalMemoryBlocks, TotalMemoryBlocks*adev->memblocksize); ++ ++ /* MemoryConfigOption.DMA_config bitmask: ++ access to ACX memory is to be done: ++ 0x00080000 using PCI conf space?! ++ 0x00040000 using IO instructions? ++ 0x00000000 using memory access instructions ++ 0x00020000 using local memory block linked list (else what?) ++ 0x00010000 using host indirect descriptors (else host must access ACX memory?) ++ */ ++#if defined (ACX_MEM) ++ /* ++ * ACX ignores DMA_config for generic slave mode. ++ */ ++ MemoryConfigOption.DMA_config = 0; ++ /* Declare start of the Rx host pool */ ++ MemoryConfigOption.pRxHostDesc = cpu2acx(0); ++ log(L_DEBUG, "pRxHostDesc 0x%08X, rxhostdesc_startphy 0x%lX\n", ++ acx2cpu(MemoryConfigOption.pRxHostDesc), ++ (long)adev->rxhostdesc_startphy); ++#else ++ if (IS_PCI(adev)) { ++ MemoryConfigOption.DMA_config = cpu_to_le32(0x30000); ++ /* Declare start of the Rx host pool */ ++ MemoryConfigOption.pRxHostDesc = cpu2acx(adev->rxhostdesc_startphy); ++ log(L_DEBUG, "pRxHostDesc 0x%08X, rxhostdesc_startphy 0x%lX\n", ++ acx2cpu(MemoryConfigOption.pRxHostDesc), ++ (long)adev->rxhostdesc_startphy); ++ } else { ++ MemoryConfigOption.DMA_config = cpu_to_le32(0x20000); ++ } ++#endif ++ ++ /* 50% of the allotment of memory blocks go to tx descriptors */ ++ TxBlockNum = TotalMemoryBlocks / 2; ++ MemoryConfigOption.TxBlockNum = cpu_to_le16(TxBlockNum); ++ ++ /* and 50% go to the rx descriptors */ ++ RxBlockNum = TotalMemoryBlocks - TxBlockNum; ++ MemoryConfigOption.RxBlockNum = cpu_to_le16(RxBlockNum); ++ ++ /* size of the tx and rx descriptor queues */ ++ TotalTxBlockSize = TxBlockNum * adev->memblocksize; ++ TotalRxBlockSize = RxBlockNum * adev->memblocksize; ++ log(L_DEBUG, "TxBlockNum %u RxBlockNum %u TotalTxBlockSize %u " ++ "TotalTxBlockSize %u\n", TxBlockNum, RxBlockNum, ++ TotalTxBlockSize, TotalRxBlockSize); ++ ++ ++ /* align the tx descriptor queue to an alignment of 0x20 (32 bytes) */ ++ MemoryConfigOption.rx_mem = ++ cpu_to_le32((le32_to_cpu(mmt->PoolStart) + 0x1f) & ~0x1f); ++ ++ /* align the rx descriptor queue to units of 0x20 ++ * and offset it by the tx descriptor queue */ ++ MemoryConfigOption.tx_mem = ++ cpu_to_le32((le32_to_cpu(mmt->PoolStart) + TotalRxBlockSize + 0x1f) & ~0x1f); ++ log(L_DEBUG, "rx_mem %08X rx_mem %08X\n", ++ MemoryConfigOption.tx_mem, MemoryConfigOption.rx_mem); ++ ++ /* alert the device to our decision */ ++ if (OK != acx_s_configure(adev, &MemoryConfigOption, ACX1xx_IE_MEMORY_CONFIG_OPTIONS)) { ++ goto bad; ++ } ++ ++ /* and tell the device to kick it into gear */ ++ if (OK != acx_s_issue_cmd(adev, ACX100_CMD_INIT_MEMORY, NULL, 0)) { ++ goto bad; ++ } ++#ifdef ACX_MEM ++ /* ++ * slave memory interface has to manage the transmit pools for the ACX, ++ * so it needs to know what we chose here. ++ */ ++ adev->acx_txbuf_start = MemoryConfigOption.tx_mem; ++ adev->acx_txbuf_numblocks = MemoryConfigOption.TxBlockNum; ++#endif ++ ++ FN_EXIT1(OK); ++ return OK; ++bad: ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++** acx100_s_create_dma_regions ++** ++** Note that this fn messes up heavily with hardware, but we cannot ++** lock it (we need to sleep). Not a problem since IRQs can't happen ++*/ ++static int ++acx100_s_create_dma_regions(acx_device_t *adev) ++{ ++ acx100_ie_queueconfig_t queueconf; ++ acx_ie_memmap_t memmap; ++ int res = NOT_OK; ++ u32 tx_queue_start, rx_queue_start; ++ ++ FN_ENTER; ++ ++ /* read out the acx100 physical start address for the queues */ ++ if (OK != acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) { ++ goto fail; ++ } ++ ++ tx_queue_start = le32_to_cpu(memmap.QueueStart); ++ rx_queue_start = tx_queue_start + TX_CNT * sizeof(txdesc_t); ++ ++ log(L_DEBUG, "initializing Queue Indicator\n"); ++ ++ memset(&queueconf, 0, sizeof(queueconf)); ++ ++ /* Not needed for PCI or slave memory, so we can avoid setting them altogether */ ++ if (IS_USB(adev)) { ++ queueconf.NumTxDesc = USB_TX_CNT; ++ queueconf.NumRxDesc = USB_RX_CNT; ++ } ++ ++ /* calculate size of queues */ ++ queueconf.AreaSize = cpu_to_le32( ++ TX_CNT * sizeof(txdesc_t) + ++ RX_CNT * sizeof(rxdesc_t) + 8 ++ ); ++ queueconf.NumTxQueues = 1; /* number of tx queues */ ++ /* sets the beginning of the tx descriptor queue */ ++ queueconf.TxQueueStart = memmap.QueueStart; ++ /* done by memset: queueconf.TxQueuePri = 0; */ ++ queueconf.RxQueueStart = cpu_to_le32(rx_queue_start); ++ queueconf.QueueOptions = 1; /* auto reset descriptor */ ++ /* sets the end of the rx descriptor queue */ ++ queueconf.QueueEnd = cpu_to_le32( ++ rx_queue_start + RX_CNT * sizeof(rxdesc_t) ++ ); ++ /* sets the beginning of the next queue */ ++ queueconf.HostQueueEnd = cpu_to_le32(le32_to_cpu(queueconf.QueueEnd) + 8); ++ if (OK != acx_s_configure(adev, &queueconf, ACX1xx_IE_QUEUE_CONFIG)) { ++ goto fail; ++ } ++ ++#if defined (ACX_MEM) ++ /* sets the beginning of the rx descriptor queue, after the tx descrs */ ++ adev->acx_queue_indicator = ++ (queueindicator_t *) le32_to_cpu (queueconf.QueueEnd); ++ if (OK != acxmem_s_create_hostdesc_queues(adev)) ++ goto fail; ++ ++ acxmem_create_desc_queues(adev, tx_queue_start, rx_queue_start); ++#else ++ if (IS_PCI(adev)) { ++ /* sets the beginning of the rx descriptor queue, after the tx descrs */ ++ if (OK != acxpci_s_create_hostdesc_queues(adev)) ++ goto fail; ++ acxpci_create_desc_queues(adev, tx_queue_start, rx_queue_start); ++ } ++#endif ++ ++ if (OK != acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) { ++ goto fail; ++ } ++ ++ /* ++ * Have to make sure we skip past the Queue Indicator (QueueEnd) and Host Queue Indicator ++ * maps, each of which are 8 bytes and follow immediately after the transmit and ++ * receive queues. ++ */ ++ memmap.PoolStart = cpu_to_le32( ++ (le32_to_cpu(memmap.QueueEnd) + 4 + 0x1f) & ~0x1f ++ ); ++ ++ if (OK != acx_s_configure(adev, &memmap, ACX1xx_IE_MEMORY_MAP)) { ++ goto fail; ++ } ++ ++ if (OK != acx100_s_init_memory_pools(adev, &memmap)) { ++ goto fail; ++ } ++ ++ res = OK; ++ goto end; ++ ++fail: ++ acx_s_msleep(1000); /* ? */ ++#if defined (ACX_MEM) ++ acxmem_free_desc_queues(adev); ++#else ++ if (IS_PCI(adev)) ++ acxpci_free_desc_queues(adev); ++#endif ++end: ++ FN_EXIT1(res); ++ return res; ++} ++ ++ ++/*********************************************************************** ++** acx111_s_create_dma_regions ++** ++** Note that this fn messes heavily with hardware, but we cannot ++** lock it (we need to sleep). Not a problem since IRQs can't happen ++*/ ++#define ACX111_PERCENT(percent) ((percent)/5) ++ ++static int ++acx111_s_create_dma_regions(acx_device_t *adev) ++{ ++ struct acx111_ie_memoryconfig memconf; ++ struct acx111_ie_queueconfig queueconf; ++ u32 tx_queue_start, rx_queue_start; ++ ++ FN_ENTER; ++ ++ /* Calculate memory positions and queue sizes */ ++ ++ /* Set up our host descriptor pool + data pool */ ++#if defined (ACX_MEM) ++ if (OK != acxmem_s_create_hostdesc_queues(adev)) ++ goto fail; ++#else ++ if (IS_PCI(adev)) { ++ if (OK != acxpci_s_create_hostdesc_queues(adev)) ++ goto fail; ++ } ++#endif ++ ++ memset(&memconf, 0, sizeof(memconf)); ++ /* the number of STAs (STA contexts) to support ++ ** NB: was set to 1 and everything seemed to work nevertheless... */ ++ memconf.no_of_stations = cpu_to_le16(VEC_SIZE(adev->sta_list)); ++ /* specify the memory block size. Default is 256 */ ++ memconf.memory_block_size = cpu_to_le16(adev->memblocksize); ++ /* let's use 50%/50% for tx/rx (specify percentage, units of 5%) */ ++ memconf.tx_rx_memory_block_allocation = ACX111_PERCENT(50); ++ /* set the count of our queues ++ ** NB: struct acx111_ie_memoryconfig shall be modified ++ ** if we ever will switch to more than one rx and/or tx queue */ ++ memconf.count_rx_queues = 1; ++ memconf.count_tx_queues = 1; ++ /* 0 == Busmaster Indirect Memory Organization, which is what we want ++ * (using linked host descs with their allocated mem). ++ * 2 == Generic Bus Slave */ ++ /* done by memset: memconf.options = 0; */ ++ /* let's use 25% for fragmentations and 75% for frame transfers ++ * (specified in units of 5%) */ ++ memconf.fragmentation = ACX111_PERCENT(75); ++ /* Rx descriptor queue config */ ++ memconf.rx_queue1_count_descs = RX_CNT; ++ memconf.rx_queue1_type = 7; /* must be set to 7 */ ++ /* done by memset: memconf.rx_queue1_prio = 0; low prio */ ++#if defined (ACX_MEM) ++ memconf.rx_queue1_host_rx_start = cpu2acx(adev->rxhostdesc_startphy); ++#else ++ if (IS_PCI(adev)) { ++ memconf.rx_queue1_host_rx_start = cpu2acx(adev->rxhostdesc_startphy); ++ } ++#endif ++ /* Tx descriptor queue config */ ++ memconf.tx_queue1_count_descs = TX_CNT; ++ /* done by memset: memconf.tx_queue1_attributes = 0; lowest priority */ ++ ++ /* NB1: this looks wrong: (memconf,ACX1xx_IE_QUEUE_CONFIG), ++ ** (queueconf,ACX1xx_IE_MEMORY_CONFIG_OPTIONS) look swapped, eh? ++ ** But it is actually correct wrt IE numbers. ++ ** NB2: sizeof(memconf) == 28 == 0x1c but configure(ACX1xx_IE_QUEUE_CONFIG) ++ ** writes 0x20 bytes (because same IE for acx100 uses struct acx100_ie_queueconfig ++ ** which is 4 bytes larger. what a mess. TODO: clean it up) */ ++ if (OK != acx_s_configure(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG)) { ++ goto fail; ++ } ++ ++ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); ++ ++ tx_queue_start = le32_to_cpu(queueconf.tx1_queue_address); ++ rx_queue_start = le32_to_cpu(queueconf.rx1_queue_address); ++ ++ log(L_INIT, "dump queue head (from card):\n" ++ "len: %u\n" ++ "tx_memory_block_address: %X\n" ++ "rx_memory_block_address: %X\n" ++ "tx1_queue address: %X\n" ++ "rx1_queue address: %X\n", ++ le16_to_cpu(queueconf.len), ++ le32_to_cpu(queueconf.tx_memory_block_address), ++ le32_to_cpu(queueconf.rx_memory_block_address), ++ tx_queue_start, ++ rx_queue_start); ++ ++#if defined (ACX_MEM) ++ acxmem_create_desc_queues(adev, tx_queue_start, rx_queue_start); ++#else ++ if (IS_PCI(adev)) ++ acxpci_create_desc_queues(adev, tx_queue_start, rx_queue_start); ++#endif ++ ++ FN_EXIT1(OK); ++ return OK; ++fail: ++#if defined (ACX_MEM) ++ acxmem_free_desc_queues(adev); ++#else ++ if (IS_PCI(adev)) ++ acxpci_free_desc_queues(adev); ++#endif ++ ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++static void ++acx_s_initialize_rx_config(acx_device_t *adev) ++{ ++ struct { ++ u16 id; ++ u16 len; ++ u16 rx_cfg1; ++ u16 rx_cfg2; ++ } ACX_PACKED cfg; ++ ++ switch (adev->mode) { ++ case ACX_MODE_OFF: ++ adev->rx_config_1 = (u16) (0 ++ /* | RX_CFG1_INCLUDE_RXBUF_HDR */ ++ /* | RX_CFG1_FILTER_SSID */ ++ /* | RX_CFG1_FILTER_BCAST */ ++ /* | RX_CFG1_RCV_MC_ADDR1 */ ++ /* | RX_CFG1_RCV_MC_ADDR0 */ ++ /* | RX_CFG1_FILTER_ALL_MULTI */ ++ /* | RX_CFG1_FILTER_BSSID */ ++ /* | RX_CFG1_FILTER_MAC */ ++ /* | RX_CFG1_RCV_PROMISCUOUS */ ++ /* | RX_CFG1_INCLUDE_FCS */ ++ /* | RX_CFG1_INCLUDE_PHY_HDR */ ++ ); ++ adev->rx_config_2 = (u16) (0 ++ /*| RX_CFG2_RCV_ASSOC_REQ */ ++ /*| RX_CFG2_RCV_AUTH_FRAMES */ ++ /*| RX_CFG2_RCV_BEACON_FRAMES */ ++ /*| RX_CFG2_RCV_CONTENTION_FREE */ ++ /*| RX_CFG2_RCV_CTRL_FRAMES */ ++ /*| RX_CFG2_RCV_DATA_FRAMES */ ++ /*| RX_CFG2_RCV_BROKEN_FRAMES */ ++ /*| RX_CFG2_RCV_MGMT_FRAMES */ ++ /*| RX_CFG2_RCV_PROBE_REQ */ ++ /*| RX_CFG2_RCV_PROBE_RESP */ ++ /*| RX_CFG2_RCV_ACK_FRAMES */ ++ /*| RX_CFG2_RCV_OTHER */ ++ ); ++ break; ++ case ACX_MODE_MONITOR: ++ adev->rx_config_1 = (u16) (0 ++ /* | RX_CFG1_INCLUDE_RXBUF_HDR */ ++ /* | RX_CFG1_FILTER_SSID */ ++ /* | RX_CFG1_FILTER_BCAST */ ++ /* | RX_CFG1_RCV_MC_ADDR1 */ ++ /* | RX_CFG1_RCV_MC_ADDR0 */ ++ /* | RX_CFG1_FILTER_ALL_MULTI */ ++ /* | RX_CFG1_FILTER_BSSID */ ++ /* | RX_CFG1_FILTER_MAC */ ++ | RX_CFG1_RCV_PROMISCUOUS ++ /* | RX_CFG1_INCLUDE_FCS */ ++ /* | RX_CFG1_INCLUDE_PHY_HDR */ ++ ); ++ adev->rx_config_2 = (u16) (0 ++ | RX_CFG2_RCV_ASSOC_REQ ++ | RX_CFG2_RCV_AUTH_FRAMES ++ | RX_CFG2_RCV_BEACON_FRAMES ++ | RX_CFG2_RCV_CONTENTION_FREE ++ | RX_CFG2_RCV_CTRL_FRAMES ++ | RX_CFG2_RCV_DATA_FRAMES ++ | RX_CFG2_RCV_BROKEN_FRAMES ++ | RX_CFG2_RCV_MGMT_FRAMES ++ | RX_CFG2_RCV_PROBE_REQ ++ | RX_CFG2_RCV_PROBE_RESP ++ | RX_CFG2_RCV_ACK_FRAMES ++ | RX_CFG2_RCV_OTHER ++ ); ++ break; ++ default: ++ adev->rx_config_1 = (u16) (0 ++ /* | RX_CFG1_INCLUDE_RXBUF_HDR */ ++ /* | RX_CFG1_FILTER_SSID */ ++ /* | RX_CFG1_FILTER_BCAST */ ++ /* | RX_CFG1_RCV_MC_ADDR1 */ ++ /* | RX_CFG1_RCV_MC_ADDR0 */ ++ /* | RX_CFG1_FILTER_ALL_MULTI */ ++ /* | RX_CFG1_FILTER_BSSID */ ++ | RX_CFG1_FILTER_MAC ++ /* | RX_CFG1_RCV_PROMISCUOUS */ ++ /* | RX_CFG1_INCLUDE_FCS */ ++ /* | RX_CFG1_INCLUDE_PHY_HDR */ ++ ); ++ adev->rx_config_2 = (u16) (0 ++ | RX_CFG2_RCV_ASSOC_REQ ++ | RX_CFG2_RCV_AUTH_FRAMES ++ | RX_CFG2_RCV_BEACON_FRAMES ++ | RX_CFG2_RCV_CONTENTION_FREE ++ | RX_CFG2_RCV_CTRL_FRAMES ++ | RX_CFG2_RCV_DATA_FRAMES ++ /*| RX_CFG2_RCV_BROKEN_FRAMES */ ++ | RX_CFG2_RCV_MGMT_FRAMES ++ | RX_CFG2_RCV_PROBE_REQ ++ | RX_CFG2_RCV_PROBE_RESP ++ /*| RX_CFG2_RCV_ACK_FRAMES */ ++ | RX_CFG2_RCV_OTHER ++ ); ++ break; ++ } ++ adev->rx_config_1 |= RX_CFG1_INCLUDE_RXBUF_HDR; ++ ++ if ((adev->rx_config_1 & RX_CFG1_INCLUDE_PHY_HDR) ++ || (adev->firmware_numver >= 0x02000000)) ++ adev->phy_header_len = IS_ACX111(adev) ? 8 : 4; ++ else ++ adev->phy_header_len = 0; ++ ++ log(L_INIT, "setting RXconfig to %04X:%04X\n", ++ adev->rx_config_1, adev->rx_config_2); ++ cfg.rx_cfg1 = cpu_to_le16(adev->rx_config_1); ++ cfg.rx_cfg2 = cpu_to_le16(adev->rx_config_2); ++ acx_s_configure(adev, &cfg, ACX1xx_IE_RXCONFIG); ++} ++ ++ ++/*********************************************************************** ++** acx_s_set_defaults ++*/ ++void ++acx_s_set_defaults(acx_device_t *adev) ++{ ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ /* do it before getting settings, prevent bogus channel 0 warning */ ++ adev->channel = 1; ++ ++ /* query some settings from the card. ++ * NOTE: for some settings, e.g. CCA and ED (ACX100!), an initial ++ * query is REQUIRED, otherwise the card won't work correctly! */ ++ adev->get_mask = GETSET_ANTENNA|GETSET_SENSITIVITY|GETSET_STATION_ID|GETSET_REG_DOMAIN; ++ /* Only ACX100 supports ED and CCA */ ++ if (IS_ACX100(adev)) ++ adev->get_mask |= GETSET_CCA|GETSET_ED_THRESH; ++ ++ acx_s_update_card_settings(adev); ++ ++ acx_lock(adev, flags); ++ ++ /* set our global interrupt mask */ ++#if defined (ACX_MEM) ++ acxmem_set_interrupt_mask(adev); ++#else ++ if (IS_PCI(adev)) ++ acxpci_set_interrupt_mask(adev); ++#endif ++ ++ adev->led_power = 1; /* LED is active on startup */ ++ adev->brange_max_quality = 60; /* LED blink max quality is 60 */ ++ adev->brange_time_last_state_change = jiffies; ++ ++ /* copy the MAC address we just got from the card ++ * into our MAC address used during current 802.11 session */ ++ MAC_COPY(adev->dev_addr, adev->ndev->dev_addr); ++ MAC_BCAST(adev->ap); ++ ++ adev->essid_len = ++ snprintf(adev->essid, sizeof(adev->essid), "STA%02X%02X%02X", ++ adev->dev_addr[3], adev->dev_addr[4], adev->dev_addr[5]); ++ adev->essid_active = 1; ++ ++ /* we have a nick field to waste, so why not abuse it ++ * to announce the driver version? ;-) */ ++ strncpy(adev->nick, "acx " ACX_RELEASE, IW_ESSID_MAX_SIZE); ++ ++#if defined (ACX_MEM) ++ adev->reg_dom_id = adev->cfgopt_domains.list[0]; ++#else ++ if (IS_PCI(adev)) { /* FIXME: this should be made to apply to USB, too! */ ++ /* first regulatory domain entry in EEPROM == default reg. domain */ ++ adev->reg_dom_id = adev->cfgopt_domains.list[0]; ++ } ++#endif ++ ++ /* 0xffff would be better, but then we won't get a "scan complete" ++ * interrupt, so our current infrastructure will fail: */ ++ adev->scan_count = 1; ++ adev->scan_mode = ACX_SCAN_OPT_ACTIVE; ++ adev->scan_duration = 100; ++ adev->scan_probe_delay = 200; ++ /* reported to break scanning: adev->scan_probe_delay = adev->cfgopt_probe_delay; */ ++ adev->scan_rate = ACX_SCAN_RATE_1; ++ ++ adev->mode = ACX_MODE_2_STA; ++ adev->auth_alg = WLAN_AUTH_ALG_OPENSYSTEM; ++ adev->listen_interval = 100; ++ adev->beacon_interval = DEFAULT_BEACON_INTERVAL; ++ adev->dtim_interval = DEFAULT_DTIM_INTERVAL; ++ ++ adev->msdu_lifetime = DEFAULT_MSDU_LIFETIME; ++ ++ adev->rts_threshold = DEFAULT_RTS_THRESHOLD; ++ adev->frag_threshold = 2346; ++ ++ /* use standard default values for retry limits */ ++ adev->short_retry = 7; /* max. retries for (short) non-RTS packets */ ++ adev->long_retry = 4; /* max. retries for long (RTS) packets */ ++ ++ adev->preamble_mode = 2; /* auto */ ++ adev->fallback_threshold = 3; ++ adev->stepup_threshold = 10; ++ adev->rate_bcast = RATE111_1; ++ adev->rate_bcast100 = RATE100_1; ++ adev->rate_basic = RATE111_1 | RATE111_2; ++ adev->rate_auto = 1; ++ if (IS_ACX111(adev)) { ++ adev->rate_oper = RATE111_ALL; ++ } else { ++ adev->rate_oper = RATE111_ACX100_COMPAT; ++ } ++ ++ /* Supported Rates element - the rates here are given in units of ++ * 500 kbit/s, plus 0x80 added. See 802.11-1999.pdf item 7.3.2.2 */ ++ acx_l_update_ratevector(adev); ++ ++ /* set some more defaults */ ++ if (IS_ACX111(adev)) { ++ /* 30mW (15dBm) is default, at least in my acx111 card: */ ++ adev->tx_level_dbm = 15; ++ } else { ++ /* don't use max. level, since it might be dangerous ++ * (e.g. WRT54G people experience ++ * excessive Tx power damage!) */ ++ adev->tx_level_dbm = 18; ++ /* ++ * Lower power for the iPaq hx4700 ++ */ ++ if (IS_MEM(adev)) { ++ adev->tx_level_dbm = 14; ++ } ++ } ++ /* adev->tx_level_auto = 1; */ ++ if (IS_ACX111(adev)) { ++ /* start with sensitivity level 1 out of 3: */ ++ adev->sensitivity = 1; ++ } ++ ++/* #define ENABLE_POWER_SAVE */ ++#ifdef ENABLE_POWER_SAVE ++ adev->ps_wakeup_cfg = PS_CFG_ENABLE | PS_CFG_WAKEUP_ALL_BEAC; ++ adev->ps_listen_interval = 1; ++ adev->ps_options = PS_OPT_ENA_ENHANCED_PS | PS_OPT_TX_PSPOLL | PS_OPT_STILL_RCV_BCASTS; ++ adev->ps_hangover_period = 30; ++ adev->ps_enhanced_transition_time = 0; ++#else ++ adev->ps_wakeup_cfg = 0; ++ adev->ps_listen_interval = 0; ++ adev->ps_options = 0; ++ adev->ps_hangover_period = 0; ++ adev->ps_enhanced_transition_time = 0; ++#endif ++ ++ /* These settings will be set in fw on ifup */ ++ adev->set_mask = 0 ++ | GETSET_RETRY ++ | SET_MSDU_LIFETIME ++ /* configure card to do rate fallback when in auto rate mode */ ++ | SET_RATE_FALLBACK ++ | SET_RXCONFIG ++ | GETSET_TXPOWER ++ /* better re-init the antenna value we got above */ ++ | GETSET_ANTENNA ++#if POWER_SAVE_80211 ++ | GETSET_POWER_80211 ++#endif ++ ; ++ ++ acx_unlock(adev, flags); ++ acx_lock_unhold(); /* hold time 844814 CPU ticks @2GHz */ ++ ++ acx_s_initialize_rx_config(adev); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** FIXME: this should be solved in a general way for all radio types ++** by decoding the radio firmware module, ++** since it probably has some standard structure describing how to ++** set the power level of the radio module which it controls. ++** Or maybe not, since the radio module probably has a function interface ++** instead which then manages Tx level programming :-\ ++*/ ++static int ++acx111_s_set_tx_level(acx_device_t *adev, u8 level_dbm) ++{ ++ struct acx111_ie_tx_level tx_level; ++ ++ /* my acx111 card has two power levels in its configoptions (== EEPROM): ++ * 1 (30mW) [15dBm] ++ * 2 (10mW) [10dBm] ++ * For now, just assume all other acx111 cards have the same. ++ * FIXME: Ideally we would query it here, but we first need a ++ * standard way to query individual configoptions easily. ++ * Well, now we have proper cfgopt txpower variables, but this still ++ * hasn't been done yet, since it also requires dBm <-> mW conversion here... */ ++ if (level_dbm <= 12) { ++ tx_level.level = 2; /* 10 dBm */ ++ adev->tx_level_dbm = 10; ++ } else { ++ tx_level.level = 1; /* 15 dBm */ ++ adev->tx_level_dbm = 15; ++ } ++ if (level_dbm != adev->tx_level_dbm) ++ log(L_INIT, "acx111 firmware has specific " ++ "power levels only: adjusted %d dBm to %d dBm!\n", ++ level_dbm, adev->tx_level_dbm); ++ ++ return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); ++} ++ ++static int ++acx_s_set_tx_level(acx_device_t *adev, u8 level_dbm) ++{ ++ if (IS_ACX111(adev)) { ++ return acx111_s_set_tx_level(adev, level_dbm); ++ } ++#if defined (ACX_MEM) ++ return acx100mem_s_set_tx_level(adev, level_dbm); ++#else ++ if (IS_PCI(adev)) { ++ return acx100pci_s_set_tx_level(adev, level_dbm); ++ } ++#endif ++ return OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++#ifdef UNUSED ++/* Returns the current tx level (ACX111) */ ++static u8 ++acx111_s_get_tx_level(acx_device_t *adev) ++{ ++ struct acx111_ie_tx_level tx_level; ++ ++ tx_level.level = 0; ++ acx_s_interrogate(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); ++ return tx_level.level; ++} ++#endif ++ ++ ++/*********************************************************************** ++** acx_l_rxmonitor ++** Called from IRQ context only ++*/ ++static void ++acx_l_rxmonitor(acx_device_t *adev, const rxbuffer_t *rxbuf) ++{ ++ wlansniffrm_t *msg; ++ struct sk_buff *skb; ++ void *datap; ++ unsigned int skb_len; ++ int payload_offset; ++ ++ FN_ENTER; ++ ++ /* we are in big luck: the acx100 doesn't modify any of the fields */ ++ /* in the 802.11 frame. just pass this packet into the PF_PACKET */ ++ /* subsystem. yeah. */ ++ payload_offset = ((u8*)acx_get_wlan_hdr(adev, rxbuf) - (u8*)rxbuf); ++ skb_len = RXBUF_BYTES_USED(rxbuf) - payload_offset; ++ ++ /* sanity check */ ++ if (unlikely(skb_len > WLAN_A4FR_MAXLEN_WEP)) { ++ printk("%s: monitor mode panic: oversized frame!\n", ++ adev->ndev->name); ++ goto end; ++ } ++ ++ if (adev->ndev->type == ARPHRD_IEEE80211_PRISM) ++ skb_len += sizeof(*msg); ++ ++ /* allocate skb */ ++ skb = dev_alloc_skb(skb_len); ++ if (unlikely(!skb)) { ++ printk("%s: no memory for skb (%u bytes)\n", ++ adev->ndev->name, skb_len); ++ goto end; ++ } ++ ++ skb_put(skb, skb_len); ++ ++ if (adev->ndev->type == ARPHRD_IEEE80211) { ++ /* when in raw 802.11 mode, just copy frame as-is */ ++ datap = skb->data; ++ } else if (adev->ndev->type == ARPHRD_IEEE80211_PRISM) { ++ /* emulate prism header */ ++ msg = (wlansniffrm_t*)skb->data; ++ datap = msg + 1; ++ ++ msg->msgcode = WLANSNIFFFRM; ++ msg->msglen = sizeof(*msg); ++ strncpy(msg->devname, adev->ndev->name, sizeof(msg->devname)-1); ++ msg->devname[sizeof(msg->devname)-1] = '\0'; ++ ++ msg->hosttime.did = WLANSNIFFFRM_hosttime; ++ msg->hosttime.status = WLANITEM_STATUS_data_ok; ++ msg->hosttime.len = 4; ++ msg->hosttime.data = jiffies; ++ ++ msg->mactime.did = WLANSNIFFFRM_mactime; ++ msg->mactime.status = WLANITEM_STATUS_data_ok; ++ msg->mactime.len = 4; ++ msg->mactime.data = rxbuf->time; ++ ++ msg->channel.did = WLANSNIFFFRM_channel; ++ msg->channel.status = WLANITEM_STATUS_data_ok; ++ msg->channel.len = 4; ++ msg->channel.data = adev->channel; ++ ++ msg->rssi.did = WLANSNIFFFRM_rssi; ++ msg->rssi.status = WLANITEM_STATUS_no_value; ++ msg->rssi.len = 4; ++ msg->rssi.data = 0; ++ ++ msg->sq.did = WLANSNIFFFRM_sq; ++ msg->sq.status = WLANITEM_STATUS_no_value; ++ msg->sq.len = 4; ++ msg->sq.data = 0; ++ ++ msg->signal.did = WLANSNIFFFRM_signal; ++ msg->signal.status = WLANITEM_STATUS_data_ok; ++ msg->signal.len = 4; ++ msg->signal.data = rxbuf->phy_snr; ++ ++ msg->noise.did = WLANSNIFFFRM_noise; ++ msg->noise.status = WLANITEM_STATUS_data_ok; ++ msg->noise.len = 4; ++ msg->noise.data = rxbuf->phy_level; ++ ++ msg->rate.did = WLANSNIFFFRM_rate; ++ msg->rate.status = WLANITEM_STATUS_data_ok; ++ msg->rate.len = 4; ++ msg->rate.data = rxbuf->phy_plcp_signal / 5; ++ ++ msg->istx.did = WLANSNIFFFRM_istx; ++ msg->istx.status = WLANITEM_STATUS_data_ok; ++ msg->istx.len = 4; ++ msg->istx.data = 0; /* tx=0: it's not a tx packet */ ++ ++ skb_len -= sizeof(*msg); ++ ++ msg->frmlen.did = WLANSNIFFFRM_signal; ++ msg->frmlen.status = WLANITEM_STATUS_data_ok; ++ msg->frmlen.len = 4; ++ msg->frmlen.data = skb_len; ++ } else { ++ printk("acx: unsupported netdev type %d!\n", adev->ndev->type); ++ dev_kfree_skb(skb); ++ return; ++ } ++ ++ /* sanity check (keep it here) */ ++ if (unlikely((int)skb_len < 0)) { ++ printk("acx: skb_len=%d. Driver bug, please report\n", (int)skb_len); ++ dev_kfree_skb(skb); ++ return; ++ } ++ memcpy(datap, ((unsigned char*)rxbuf)+payload_offset, skb_len); ++ ++ skb->dev = adev->ndev; ++ skb->dev->last_rx = jiffies; ++ ++ skb_reset_mac_header(skb); ++ skb->ip_summed = CHECKSUM_NONE; ++ skb->pkt_type = PACKET_OTHERHOST; ++ skb->protocol = htons(ETH_P_80211_RAW); ++ netif_rx(skb); ++ ++ adev->stats.rx_packets++; ++ adev->stats.rx_bytes += skb->len; ++ ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_l_rx_ieee802_11_frame ++** ++** Called from IRQ context only ++*/ ++ ++/* All these contortions are for saner dup logging ++** ++** We want: (a) to know about excessive dups ++** (b) to not spam kernel log about occasional dups ++** ++** 1/64 threshold was chosen by running "ping -A" ++** It gave "rx: 59 DUPs in 2878 packets" only with 4 parallel ++** "ping -A" streams running. */ ++/* 2005-10-11: bumped up to 1/8 ++** subtract a $smallint from dup_count in order to ++** avoid "2 DUPs in 19 packets" messages */ ++static inline int ++acx_l_handle_dup(acx_device_t *adev, u16 seq) ++{ ++ if (adev->dup_count) { ++ adev->nondup_count++; ++ if (time_after(jiffies, adev->dup_msg_expiry)) { ++ /* Log only if more than 1 dup in 64 packets */ ++ if (adev->nondup_count/8 < adev->dup_count-5) { ++ printk(KERN_INFO "%s: rx: %d DUPs in " ++ "%d packets received in 10 secs\n", ++ adev->ndev->name, ++ adev->dup_count, ++ adev->nondup_count); ++ } ++ adev->dup_count = 0; ++ adev->nondup_count = 0; ++ } ++ } ++ if (unlikely(seq == adev->last_seq_ctrl)) { ++ if (!adev->dup_count++) ++ adev->dup_msg_expiry = jiffies + 10*HZ; ++ adev->stats.rx_errors++; ++ return 1; /* a dup */ ++ } ++ adev->last_seq_ctrl = seq; ++ return 0; ++} ++ ++static int ++acx_l_rx_ieee802_11_frame(acx_device_t *adev, rxbuffer_t *rxbuf) ++{ ++ unsigned int ftype, fstype; ++ const wlan_hdr_t *hdr; ++ int result = NOT_OK; ++ ++ FN_ENTER; ++ ++ hdr = acx_get_wlan_hdr(adev, rxbuf); ++ ++ /* see IEEE 802.11-1999.pdf chapter 7 "MAC frame formats" */ ++ if (unlikely((hdr->fc & WF_FC_PVERi) != 0)) { ++ printk_ratelimited(KERN_INFO "rx: unsupported 802.11 protocol\n"); ++ goto end; ++ } ++ ++ ftype = hdr->fc & WF_FC_FTYPEi; ++ fstype = hdr->fc & WF_FC_FSTYPEi; ++ ++ switch (ftype) { ++ /* check data frames first, for speed */ ++ case WF_FTYPE_DATAi: ++ switch (fstype) { ++ case WF_FSTYPE_DATAONLYi: ++ if (acx_l_handle_dup(adev, hdr->seq)) ++ break; /* a dup, simply discard it */ ++ ++ /* TODO: ++ if (WF_FC_FROMTODSi == (hdr->fc & WF_FC_FROMTODSi)) { ++ result = acx_l_process_data_frame_wds(adev, rxbuf); ++ break; ++ } ++ */ ++ ++ switch (adev->mode) { ++ case ACX_MODE_3_AP: ++ result = acx_l_process_data_frame_master(adev, rxbuf); ++ break; ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_2_STA: ++ result = acx_l_process_data_frame_client(adev, rxbuf); ++ break; ++ } ++ case WF_FSTYPE_DATA_CFACKi: ++ case WF_FSTYPE_DATA_CFPOLLi: ++ case WF_FSTYPE_DATA_CFACK_CFPOLLi: ++ case WF_FSTYPE_CFPOLLi: ++ case WF_FSTYPE_CFACK_CFPOLLi: ++ /* see above. ++ acx_process_class_frame(adev, rxbuf, 3); */ ++ break; ++ case WF_FSTYPE_NULLi: ++ /* acx_l_process_NULL_frame(adev, rxbuf, 3); */ ++ break; ++ /* FIXME: same here, see above */ ++ case WF_FSTYPE_CFACKi: ++ default: ++ break; ++ } ++ break; ++ case WF_FTYPE_MGMTi: ++ result = acx_l_process_mgmt_frame(adev, rxbuf); ++ break; ++ case WF_FTYPE_CTLi: ++ if (fstype == WF_FSTYPE_PSPOLLi) ++ result = OK; ++ /* this call is irrelevant, since ++ * acx_process_class_frame is a stub, so return ++ * immediately instead. ++ * return acx_process_class_frame(adev, rxbuf, 3); */ ++ break; ++ default: ++ break; ++ } ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_rxbuf ++** ++** NB: used by USB code also ++*/ ++void ++acx_l_process_rxbuf(acx_device_t *adev, rxbuffer_t *rxbuf) ++{ ++ struct wlan_hdr *hdr; ++ unsigned int qual; ++ int buf_len; ++ u16 fc; ++ ++ hdr = acx_get_wlan_hdr(adev, rxbuf); ++ fc = le16_to_cpu(hdr->fc); ++ /* length of frame from control field to first byte of FCS */ ++ buf_len = RXBUF_BYTES_RCVD(adev, rxbuf); ++ ++ if ( ((WF_FC_FSTYPE & fc) != WF_FSTYPE_BEACON) ++ || (acx_debug & L_XFER_BEACON) ++ ) { ++ log(L_XFER|L_DATA, "rx: %s " ++ "time:%u len:%u signal:%u SNR:%u macstat:%02X " ++ "phystat:%02X phyrate:%u status:%u\n", ++ acx_get_packet_type_string(fc), ++ le32_to_cpu(rxbuf->time), ++ buf_len, ++ acx_signal_to_winlevel(rxbuf->phy_level), ++ acx_signal_to_winlevel(rxbuf->phy_snr), ++ rxbuf->mac_status, ++ rxbuf->phy_stat_baseband, ++ rxbuf->phy_plcp_signal, ++ adev->status); ++ } ++ ++ if (unlikely(acx_debug & L_DATA)) { ++ printk("rx: 802.11 buf[%u]: ", buf_len); ++ acx_dump_bytes(hdr, buf_len); ++ } ++ ++ /* FIXME: should check for Rx errors (rxbuf->mac_status? ++ * discard broken packets - but NOT for monitor!) ++ * and update Rx packet statistics here */ ++ ++ if (unlikely(adev->mode == ACX_MODE_MONITOR)) { ++ acx_l_rxmonitor(adev, rxbuf); ++ } else if (likely(buf_len >= WLAN_HDR_A3_LEN)) { ++ acx_l_rx_ieee802_11_frame(adev, rxbuf); ++ } else { ++ log(L_DEBUG|L_XFER|L_DATA, ++ "rx: NOT receiving packet (%s): " ++ "size too small (%u)\n", ++ acx_get_packet_type_string(fc), ++ buf_len); ++ } ++ ++ /* Now check Rx quality level, AFTER processing packet. ++ * I tried to figure out how to map these levels to dBm ++ * values, but for the life of me I really didn't ++ * manage to get it. Either these values are not meant to ++ * be expressed in dBm, or it's some pretty complicated ++ * calculation. */ ++ ++#ifdef FROM_SCAN_SOURCE_ONLY ++ /* only consider packets originating from the MAC ++ * address of the device that's managing our BSSID. ++ * Disable it for now, since it removes information (levels ++ * from different peers) and slows the Rx path. */ ++ if (adev->ap_client ++ && mac_is_equal(hdr->a2, adev->ap_client->address)) { ++#endif ++ adev->wstats.qual.level = acx_signal_to_winlevel(rxbuf->phy_level); ++ adev->wstats.qual.noise = acx_signal_to_winlevel(rxbuf->phy_snr); ++#ifndef OLD_QUALITY ++ qual = acx_signal_determine_quality(adev->wstats.qual.level, ++ adev->wstats.qual.noise); ++#else ++ qual = (adev->wstats.qual.noise <= 100) ? ++ 100 - adev->wstats.qual.noise : 0; ++#endif ++ adev->wstats.qual.qual = qual; ++ adev->wstats.qual.updated = 7; /* all 3 indicators updated */ ++#ifdef FROM_SCAN_SOURCE_ONLY ++ } ++#endif ++} ++ ++ ++/*********************************************************************** ++** acx_l_handle_txrate_auto ++** ++** Theory of operation: ++** client->rate_cap is a bitmask of rates client is capable of. ++** client->rate_cfg is a bitmask of allowed (configured) rates. ++** It is set as a result of iwconfig rate N [auto] ++** or iwpriv set_rates "N,N,N N,N,N" commands. ++** It can be fixed (e.g. 0x0080 == 18Mbit only), ++** auto (0x00ff == 18Mbit or any lower value), ++** and code handles any bitmask (0x1081 == try 54Mbit,18Mbit,1Mbit _only_). ++** ++** client->rate_cur is a value for rate111 field in tx descriptor. ++** It is always set to txrate_cfg sans zero or more most significant ++** bits. This routine handles selection of new rate_cur value depending on ++** outcome of last tx event. ++** ++** client->rate_100 is a precalculated rate value for acx100 ++** (we can do without it, but will need to calculate it on each tx). ++** ++** You cannot configure mixed usage of 5.5 and/or 11Mbit rate ++** with PBCC and CCK modulation. Either both at CCK or both at PBCC. ++** In theory you can implement it, but so far it is considered not worth doing. ++** ++** 22Mbit, of course, is PBCC always. */ ++ ++/* maps acx100 tx descr rate field to acx111 one */ ++static u16 ++rate100to111(u8 r) ++{ ++ switch (r) { ++ case RATE100_1: return RATE111_1; ++ case RATE100_2: return RATE111_2; ++ case RATE100_5: ++ case (RATE100_5 | RATE100_PBCC511): return RATE111_5; ++ case RATE100_11: ++ case (RATE100_11 | RATE100_PBCC511): return RATE111_11; ++ case RATE100_22: return RATE111_22; ++ default: ++ printk("acx: unexpected acx100 txrate: %u! " ++ "Please report\n", r); ++ return RATE111_1; ++ } ++} ++ ++ ++void ++acx_l_handle_txrate_auto(acx_device_t *adev, struct client *txc, ++ u16 cur, u8 rate100, u16 rate111, ++ u8 error, int pkts_to_ignore) ++{ ++ u16 sent_rate; ++ int slower_rate_was_used; ++ ++ /* vda: hmm. current code will do this: ++ ** 1. send packets at 11 Mbit, stepup++ ++ ** 2. will try to send at 22Mbit. hardware will see no ACK, ++ ** retries at 11Mbit, success. code notes that used rate ++ ** is lower. stepup = 0, fallback++ ++ ** 3. repeat step 2 fallback_count times. Fall back to ++ ** 11Mbit. go to step 1. ++ ** If stepup_count is large (say, 16) and fallback_count ++ ** is small (3), this wouldn't be too bad wrt throughput */ ++ ++ if (unlikely(!cur)) { ++ printk("acx: BUG! ratemask is empty\n"); ++ return; /* or else we may lock up the box */ ++ } ++ ++ /* do some preparations, i.e. calculate the one rate that was ++ * used to send this packet */ ++ if (IS_ACX111(adev)) { ++ sent_rate = 1 << highest_bit(rate111 & RATE111_ALL); ++ } else { ++ sent_rate = rate100to111(rate100); ++ } ++ /* sent_rate has only one bit set now, corresponding to tx rate ++ * which was used by hardware to tx this particular packet */ ++ ++ /* now do the actual auto rate management */ ++ log(L_XFER, "tx: %sclient=%p/"MACSTR" used=%04X cur=%04X cfg=%04X " ++ "__=%u/%u ^^=%u/%u\n", ++ (txc->ignore_count > 0) ? "[IGN] " : "", ++ txc, MAC(txc->address), sent_rate, cur, txc->rate_cfg, ++ txc->fallback_count, adev->fallback_threshold, ++ txc->stepup_count, adev->stepup_threshold ++ ); ++ ++ /* we need to ignore old packets already in the tx queue since ++ * they use older rate bytes configured before our last rate change, ++ * otherwise our mechanism will get confused by interpreting old data. ++ * Do it after logging above */ ++ if (txc->ignore_count) { ++ txc->ignore_count--; ++ return; ++ } ++ ++ /* true only if the only nonzero bit in sent_rate is ++ ** less significant than highest nonzero bit in cur */ ++ slower_rate_was_used = ( cur > ((sent_rate<<1)-1) ); ++ ++ if (slower_rate_was_used || error) { ++ txc->stepup_count = 0; ++ if (++txc->fallback_count <= adev->fallback_threshold) ++ return; ++ txc->fallback_count = 0; ++ ++ /* clear highest 1 bit in cur */ ++ sent_rate = RATE111_54; ++ while (!(cur & sent_rate)) sent_rate >>= 1; ++ CLEAR_BIT(cur, sent_rate); ++ if (!cur) /* we can't disable all rates! */ ++ cur = sent_rate; ++ log(L_XFER, "tx: falling back to ratemask %04X\n", cur); ++ ++ } else { /* there was neither lower rate nor error */ ++ txc->fallback_count = 0; ++ if (++txc->stepup_count <= adev->stepup_threshold) ++ return; ++ txc->stepup_count = 0; ++ ++ /* Sanitize. Sort of not needed, but I dont trust hw that much... ++ ** what if it can report bogus tx rates sometimes? */ ++ while (!(cur & sent_rate)) sent_rate >>= 1; ++ ++ /* try to find a higher sent_rate that isn't yet in our ++ * current set, but is an allowed cfg */ ++ while (1) { ++ sent_rate <<= 1; ++ if (sent_rate > txc->rate_cfg) ++ /* no higher rates allowed by config */ ++ return; ++ if (!(cur & sent_rate) && (txc->rate_cfg & sent_rate)) ++ /* found */ ++ break; ++ /* not found, try higher one */ ++ } ++ SET_BIT(cur, sent_rate); ++ log(L_XFER, "tx: stepping up to ratemask %04X\n", cur); ++ } ++ ++ txc->rate_cur = cur; ++ txc->ignore_count = pkts_to_ignore; ++ /* calculate acx100 style rate byte if needed */ ++ if (IS_ACX100(adev)) { ++ txc->rate_100 = acx_bitpos2rate100[highest_bit(cur)]; ++ } ++} ++ ++ ++/*********************************************************************** ++** acx_i_start_xmit ++** ++** Called by network core. Can be called outside of process context. ++*/ ++int ++acx_i_start_xmit(struct sk_buff *skb, struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ tx_t *tx; ++ void *txbuf; ++ unsigned long flags; ++ int txresult = NOT_OK; ++ int len; ++ ++ FN_ENTER; ++ ++ if (unlikely(!skb)) { ++ /* indicate success */ ++ txresult = OK; ++ goto end_no_unlock; ++ } ++ if (unlikely(!adev)) { ++ goto end_no_unlock; ++ } ++ ++ acx_lock(adev, flags); ++ ++ if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) { ++ goto end; ++ } ++ if (unlikely(adev->mode == ACX_MODE_OFF)) { ++ goto end; ++ } ++ if (unlikely(acx_queue_stopped(ndev))) { ++ log(L_DEBUG, "%s: called when queue stopped\n", __func__); ++ goto end; ++ } ++ if (unlikely(ACX_STATUS_4_ASSOCIATED != adev->status)) { ++ log(L_XFER, "trying to xmit, but not associated yet: " ++ "aborting...\n"); ++ /* silently drop the packet, since we're not connected yet */ ++ txresult = OK; ++ /* ...but indicate an error nevertheless */ ++ adev->stats.tx_errors++; ++ goto end; ++ } ++ ++ tx = acx_l_alloc_tx(adev); ++ if (unlikely(!tx)) { ++#ifndef ACX_MEM ++ /* ++ * generic slave interface has to make do with the tiny amount, around ++ * 7k, of transmit buffer space on the ACX itself. It is likely this will ++ * frequently be full. ++ */ ++ printk_ratelimited("%s: start_xmit: txdesc ring is full, " ++ "dropping tx\n", ndev->name); ++#endif ++ txresult = NOT_OK; ++ goto end; ++ } ++ ++ txbuf = acx_l_get_txbuf(adev, tx); ++ if (unlikely(!txbuf)) { ++ /* Card was removed */ ++ txresult = NOT_OK; ++ acx_l_dealloc_tx(adev, tx); ++ goto end; ++ } ++ len = acx_ether_to_txbuf(adev, txbuf, skb); ++ if (unlikely(len < 0)) { ++ /* Error in packet conversion */ ++ txresult = NOT_OK; ++ acx_l_dealloc_tx(adev, tx); ++ goto end; ++ } ++ acx_l_tx_data(adev, tx, len); ++ ndev->trans_start = jiffies; ++ ++ txresult = OK; ++ adev->stats.tx_packets++; ++ adev->stats.tx_bytes += skb->len; ++ ++end: ++ acx_unlock(adev, flags); ++ ++end_no_unlock: ++ if ((txresult == OK) && skb) ++ dev_kfree_skb_any(skb); ++ ++ FN_EXIT1(txresult); ++ return txresult; ++} ++ ++ ++/*********************************************************************** ++** acx_l_update_ratevector ++** ++** Updates adev->rate_supported[_len] according to rate_{basic,oper} ++*/ ++const u8 ++acx_bitpos2ratebyte[] = { ++ DOT11RATEBYTE_1, ++ DOT11RATEBYTE_2, ++ DOT11RATEBYTE_5_5, ++ DOT11RATEBYTE_6_G, ++ DOT11RATEBYTE_9_G, ++ DOT11RATEBYTE_11, ++ DOT11RATEBYTE_12_G, ++ DOT11RATEBYTE_18_G, ++ DOT11RATEBYTE_22, ++ DOT11RATEBYTE_24_G, ++ DOT11RATEBYTE_36_G, ++ DOT11RATEBYTE_48_G, ++ DOT11RATEBYTE_54_G, ++}; ++ ++void ++acx_l_update_ratevector(acx_device_t *adev) ++{ ++ u16 bcfg = adev->rate_basic; ++ u16 ocfg = adev->rate_oper; ++ u8 *supp = adev->rate_supported; ++ const u8 *dot11 = acx_bitpos2ratebyte; ++ ++ FN_ENTER; ++ ++ while (ocfg) { ++ if (ocfg & 1) { ++ *supp = *dot11; ++ if (bcfg & 1) { ++ *supp |= 0x80; ++ } ++ supp++; ++ } ++ dot11++; ++ ocfg >>= 1; ++ bcfg >>= 1; ++ } ++ adev->rate_supported_len = supp - adev->rate_supported; ++ if (acx_debug & L_ASSOC) { ++ printk("new ratevector: "); ++ acx_dump_bytes(adev->rate_supported, adev->rate_supported_len); ++ } ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_l_sta_list_init ++*/ ++static void ++acx_l_sta_list_init(acx_device_t *adev) ++{ ++ FN_ENTER; ++ memset(adev->sta_hash_tab, 0, sizeof(adev->sta_hash_tab)); ++ memset(adev->sta_list, 0, sizeof(adev->sta_list)); ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_l_sta_list_get_from_hash ++*/ ++static inline client_t* ++acx_l_sta_list_get_from_hash(acx_device_t *adev, const u8 *address) ++{ ++ return adev->sta_hash_tab[address[5] % VEC_SIZE(adev->sta_hash_tab)]; ++} ++ ++ ++/*********************************************************************** ++** acx_l_sta_list_get ++*/ ++client_t* ++acx_l_sta_list_get(acx_device_t *adev, const u8 *address) ++{ ++ client_t *client; ++ FN_ENTER; ++ client = acx_l_sta_list_get_from_hash(adev, address); ++ while (client) { ++ if (mac_is_equal(address, client->address)) { ++ client->mtime = jiffies; ++ break; ++ } ++ client = client->next; ++ } ++ FN_EXIT0; ++ return client; ++} ++ ++ ++/*********************************************************************** ++** acx_l_sta_list_del ++*/ ++void ++acx_l_sta_list_del(acx_device_t *adev, client_t *victim) ++{ ++ client_t *client, *next; ++ ++ client = acx_l_sta_list_get_from_hash(adev, victim->address); ++ next = client; ++ /* tricky. next = client on first iteration only, ++ ** on all other iters next = client->next */ ++ while (next) { ++ if (next == victim) { ++ client->next = victim->next; ++ /* Overkill */ ++ memset(victim, 0, sizeof(*victim)); ++ break; ++ } ++ client = next; ++ next = client->next; ++ } ++} ++ ++ ++/*********************************************************************** ++** acx_l_sta_list_alloc ++** ++** Never fails - will evict oldest client if needed ++*/ ++static client_t* ++acx_l_sta_list_alloc(acx_device_t *adev) ++{ ++ int i; ++ unsigned long age, oldest_age; ++ client_t *client, *oldest; ++ ++ FN_ENTER; ++ ++ oldest = &adev->sta_list[0]; ++ oldest_age = 0; ++ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { ++ client = &adev->sta_list[i]; ++ ++ if (!client->used) { ++ goto found; ++ } else { ++ age = jiffies - client->mtime; ++ if (oldest_age < age) { ++ oldest_age = age; ++ oldest = client; ++ } ++ } ++ } ++ acx_l_sta_list_del(adev, oldest); ++ client = oldest; ++found: ++ memset(client, 0, sizeof(*client)); ++ FN_EXIT0; ++ return client; ++} ++ ++ ++/*********************************************************************** ++** acx_l_sta_list_add ++** ++** Never fails - will evict oldest client if needed ++*/ ++/* In case we will reimplement it differently... */ ++#define STA_LIST_ADD_CAN_FAIL 0 ++ ++static client_t* ++acx_l_sta_list_add(acx_device_t *adev, const u8 *address) ++{ ++ client_t *client; ++ int index; ++ ++ FN_ENTER; ++ ++ client = acx_l_sta_list_alloc(adev); ++ ++ client->mtime = jiffies; ++ MAC_COPY(client->address, address); ++ client->used = CLIENT_EXIST_1; ++ client->auth_alg = WLAN_AUTH_ALG_SHAREDKEY; ++ client->auth_step = 1; ++ /* give some tentative peer rate values ++ ** (needed because peer may do auth without probing us first, ++ ** thus we'll have no idea of peer's ratevector yet). ++ ** Will be overwritten by scanning or assoc code */ ++ client->rate_cap = adev->rate_basic; ++ client->rate_cfg = adev->rate_basic; ++ client->rate_cur = 1 << lowest_bit(adev->rate_basic); ++ ++ index = address[5] % VEC_SIZE(adev->sta_hash_tab); ++ client->next = adev->sta_hash_tab[index]; ++ adev->sta_hash_tab[index] = client; ++ ++ acxlog_mac(L_ASSOC, "sta_list_add: sta=", address, "\n"); ++ ++ FN_EXIT0; ++ return client; ++} ++ ++ ++/*********************************************************************** ++** acx_l_sta_list_get_or_add ++** ++** Never fails - will evict oldest client if needed ++*/ ++static client_t* ++acx_l_sta_list_get_or_add(acx_device_t *adev, const u8 *address) ++{ ++ client_t *client = acx_l_sta_list_get(adev, address); ++ if (!client) ++ client = acx_l_sta_list_add(adev, address); ++ return client; ++} ++ ++ ++/*********************************************************************** ++** acx_set_status ++** ++** This function is called in many atomic regions, must not sleep ++** ++** This function does not need locking UNLESS you call it ++** as acx_set_status(ACX_STATUS_4_ASSOCIATED), bacause this can ++** wake queue. This can race with stop_queue elsewhere. ++** See acx_stop_queue comment. */ ++void ++acx_set_status(acx_device_t *adev, u16 new_status) ++{ ++#define QUEUE_OPEN_AFTER_ASSOC 1 /* this really seems to be needed now */ ++ u16 old_status = adev->status; ++ ++ FN_ENTER; ++ ++ log(L_ASSOC, "%s(%d):%s\n", ++ __func__, new_status, acx_get_status_name(new_status)); ++ ++ /* wireless_send_event never sleeps */ ++ if (ACX_STATUS_4_ASSOCIATED == new_status) { ++ union iwreq_data wrqu; ++ ++ wrqu.data.length = 0; ++ wrqu.data.flags = 0; ++ wireless_send_event(adev->ndev, SIOCGIWSCAN, &wrqu, NULL); ++ ++ wrqu.data.length = 0; ++ wrqu.data.flags = 0; ++ MAC_COPY(wrqu.ap_addr.sa_data, adev->bssid); ++ wrqu.ap_addr.sa_family = ARPHRD_ETHER; ++ wireless_send_event(adev->ndev, SIOCGIWAP, &wrqu, NULL); ++ } else { ++ union iwreq_data wrqu; ++ ++ /* send event with empty BSSID to indicate we're not associated */ ++ MAC_ZERO(wrqu.ap_addr.sa_data); ++ wrqu.ap_addr.sa_family = ARPHRD_ETHER; ++ wireless_send_event(adev->ndev, SIOCGIWAP, &wrqu, NULL); ++ } ++ ++ adev->status = new_status; ++ ++ switch (new_status) { ++ case ACX_STATUS_1_SCANNING: ++ adev->scan_retries = 0; ++ /* 1.0 s initial scan time */ ++ acx_set_timer(adev, 1000000); ++ break; ++ case ACX_STATUS_2_WAIT_AUTH: ++ case ACX_STATUS_3_AUTHENTICATED: ++ adev->auth_or_assoc_retries = 0; ++ acx_set_timer(adev, 1500000); /* 1.5 s */ ++ break; ++ } ++ ++#if QUEUE_OPEN_AFTER_ASSOC ++ if (new_status == ACX_STATUS_4_ASSOCIATED) { ++ if (old_status < ACX_STATUS_4_ASSOCIATED) { ++ /* ah, we're newly associated now, ++ * so let's indicate carrier */ ++ acx_carrier_on(adev->ndev, "after association"); ++ acx_wake_queue(adev->ndev, "after association"); ++ } ++ } else { ++ /* not associated any more, so let's kill carrier */ ++ if (old_status >= ACX_STATUS_4_ASSOCIATED) { ++ acx_carrier_off(adev->ndev, "after losing association"); ++ acx_stop_queue(adev->ndev, "after losing association"); ++ } ++ } ++#endif ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_i_timer ++** ++** Fires up periodically. Used to kick scan/auth/assoc if something goes wrong ++*/ ++void ++acx_i_timer(unsigned long address) ++{ ++ unsigned long flags; ++ acx_device_t *adev = (acx_device_t*)address; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ ++ log(L_DEBUG|L_ASSOC, "%s: adev->status=%d (%s)\n", ++ __func__, adev->status, acx_get_status_name(adev->status)); ++ ++ switch (adev->status) { ++ case ACX_STATUS_1_SCANNING: ++ /* was set to 0 by set_status() */ ++ if (++adev->scan_retries < 7) { ++ acx_set_timer(adev, 1000000); ++ /* used to interrogate for scan status. ++ ** We rely on SCAN_COMPLETE IRQ instead */ ++ log(L_ASSOC, "continuing scan (%d sec)\n", ++ adev->scan_retries); ++ } else { ++ log(L_ASSOC, "stopping scan\n"); ++ /* send stop_scan cmd when we leave the interrupt context, ++ * and make a decision what to do next (COMPLETE_SCAN) */ ++ acx_schedule_task(adev, ++ ACX_AFTER_IRQ_CMD_STOP_SCAN + ACX_AFTER_IRQ_COMPLETE_SCAN); ++ } ++ break; ++ case ACX_STATUS_2_WAIT_AUTH: ++ /* was set to 0 by set_status() */ ++ if (++adev->auth_or_assoc_retries < 10) { ++ log(L_ASSOC, "resend authen1 request (attempt %d)\n", ++ adev->auth_or_assoc_retries + 1); ++ acx_l_transmit_authen1(adev); ++ } else { ++ /* time exceeded: fall back to scanning mode */ ++ log(L_ASSOC, ++ "authen1 request reply timeout, giving up\n"); ++ /* we are a STA, need to find AP anyhow */ ++ acx_set_status(adev, ACX_STATUS_1_SCANNING); ++ acx_schedule_task(adev, ACX_AFTER_IRQ_RESTART_SCAN); ++ } ++ /* used to be 1500000, but some other driver uses 2.5s */ ++ acx_set_timer(adev, 2500000); ++ break; ++ case ACX_STATUS_3_AUTHENTICATED: ++ /* was set to 0 by set_status() */ ++ if (++adev->auth_or_assoc_retries < 10) { ++ log(L_ASSOC, "resend assoc request (attempt %d)\n", ++ adev->auth_or_assoc_retries + 1); ++ acx_l_transmit_assoc_req(adev); ++ } else { ++ /* time exceeded: give up */ ++ log(L_ASSOC, ++ "association request reply timeout, giving up\n"); ++ /* we are a STA, need to find AP anyhow */ ++ acx_set_status(adev, ACX_STATUS_1_SCANNING); ++ acx_schedule_task(adev, ACX_AFTER_IRQ_RESTART_SCAN); ++ } ++ acx_set_timer(adev, 2500000); /* see above */ ++ break; ++ case ACX_STATUS_4_ASSOCIATED: ++ default: ++ break; ++ } ++ ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_set_timer ++** ++** Sets the 802.11 state management timer's timeout. ++*/ ++void ++acx_set_timer(acx_device_t *adev, int timeout_us) ++{ ++ FN_ENTER; ++ ++ log(L_DEBUG|L_IRQ, "%s(%u ms)\n", __func__, timeout_us/1000); ++ if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { ++ printk("attempt to set the timer " ++ "when the card interface is not up!\n"); ++ goto end; ++ } ++ ++ /* first check if the timer was already initialized, THEN modify it */ ++ if (adev->mgmt_timer.function) { ++ mod_timer(&adev->mgmt_timer, ++ jiffies + (timeout_us * HZ / 1000000)); ++ } ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_l_transmit_assocresp ++** ++** We are an AP here ++*/ ++static const u8 ++dot11ratebyte[] = { ++ DOT11RATEBYTE_1, ++ DOT11RATEBYTE_2, ++ DOT11RATEBYTE_5_5, ++ DOT11RATEBYTE_6_G, ++ DOT11RATEBYTE_9_G, ++ DOT11RATEBYTE_11, ++ DOT11RATEBYTE_12_G, ++ DOT11RATEBYTE_18_G, ++ DOT11RATEBYTE_22, ++ DOT11RATEBYTE_24_G, ++ DOT11RATEBYTE_36_G, ++ DOT11RATEBYTE_48_G, ++ DOT11RATEBYTE_54_G, ++}; ++ ++static inline int ++find_pos(const u8 *p, int size, u8 v) ++{ ++ int i; ++ for (i = 0; i < size; i++) ++ if (p[i] == v) ++ return i; ++ /* printk a message about strange byte? */ ++ return 0; ++} ++ ++static void ++add_bits_to_ratemasks(u8* ratevec, int len, u16* brate, u16* orate) ++{ ++ while (len--) { ++ int n = 1 << find_pos(dot11ratebyte, ++ sizeof(dot11ratebyte), *ratevec & 0x7f); ++ if (*ratevec & 0x80) ++ *brate |= n; ++ *orate |= n; ++ ratevec++; ++ } ++} ++ ++static int ++acx_l_transmit_assocresp(acx_device_t *adev, const wlan_fr_assocreq_t *req) ++{ ++ struct tx *tx; ++ struct wlan_hdr_mgmt *head; ++ struct assocresp_frame_body *body; ++ u8 *p; ++ const u8 *da; ++ /* const u8 *sa; */ ++ const u8 *bssid; ++ client_t *clt; ++ ++ FN_ENTER; ++ ++ /* sa = req->hdr->a1; */ ++ da = req->hdr->a2; ++ bssid = req->hdr->a3; ++ ++ clt = acx_l_sta_list_get(adev, da); ++ if (!clt) ++ goto ok; ++ ++ /* Assoc without auth is a big no-no */ ++ /* Let's be liberal: if already assoc'ed STA sends assoc req again, ++ ** we won't be rude */ ++ if (clt->used != CLIENT_AUTHENTICATED_2 ++ && clt->used != CLIENT_ASSOCIATED_3) { ++ acx_l_transmit_deauthen(adev, da, WLAN_MGMT_REASON_CLASS2_NONAUTH); ++ goto bad; ++ } ++ ++ clt->used = CLIENT_ASSOCIATED_3; ++ ++ if (clt->aid == 0) ++ clt->aid = ++adev->aid; ++ clt->cap_info = ieee2host16(*(req->cap_info)); ++ ++ /* We cheat here a bit. We don't really care which rates are flagged ++ ** as basic by the client, so we stuff them in single ratemask */ ++ clt->rate_cap = 0; ++ if (req->supp_rates) ++ add_bits_to_ratemasks(req->supp_rates->rates, ++ req->supp_rates->len, &clt->rate_cap, &clt->rate_cap); ++ if (req->ext_rates) ++ add_bits_to_ratemasks(req->ext_rates->rates, ++ req->ext_rates->len, &clt->rate_cap, &clt->rate_cap); ++ /* We can check that client supports all basic rates, ++ ** and deny assoc if not. But let's be liberal, right? ;) */ ++ clt->rate_cfg = clt->rate_cap & adev->rate_oper; ++ if (!clt->rate_cfg) clt->rate_cfg = 1 << lowest_bit(adev->rate_oper); ++ clt->rate_cur = 1 << lowest_bit(clt->rate_cfg); ++ if (IS_ACX100(adev)) ++ clt->rate_100 = acx_bitpos2rate100[lowest_bit(clt->rate_cfg)]; ++ clt->fallback_count = clt->stepup_count = 0; ++ clt->ignore_count = 16; ++ ++ tx = acx_l_alloc_tx(adev); ++ if (!tx) ++ goto bad; ++ head = acx_l_get_txbuf(adev, tx); ++ if (!head) { ++ acx_l_dealloc_tx(adev, tx); ++ goto bad; ++ } ++ body = (void*)(head + 1); ++ ++ head->fc = WF_FSTYPE_ASSOCRESPi; ++ head->dur = req->hdr->dur; ++ MAC_COPY(head->da, da); ++ MAC_COPY(head->sa, adev->dev_addr); ++ MAC_COPY(head->bssid, bssid); ++ head->seq = req->hdr->seq; ++ ++ body->cap_info = host2ieee16(adev->capabilities); ++ body->status = host2ieee16(0); ++ body->aid = host2ieee16(clt->aid); ++ p = wlan_fill_ie_rates((u8*)&body->rates, adev->rate_supported_len, ++ adev->rate_supported); ++ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, ++ adev->rate_supported); ++ ++ acx_l_tx_data(adev, tx, p - (u8*)head); ++ok: ++ FN_EXIT1(OK); ++ return OK; ++bad: ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++* acx_l_transmit_reassocresp ++ ++You may be wondering, just like me, what the hell ReAuth is. ++In practice it was seen sent by STA when STA feels like losing connection. ++ ++[802.11] ++ ++5.4.2.3 Reassociation ++ ++Association is sufficient for no-transition message delivery between ++IEEE 802.11 stations. Additional functionality is needed to support ++BSS-transition mobility. The additional required functionality ++is provided by the reassociation service. Reassociation is a DSS. ++The reassociation service is invoked to 'move' a current association ++from one AP to another. This keeps the DS informed of the current ++mapping between AP and STA as the station moves from BSS to BSS within ++an ESS. Reassociation also enables changing association attributes ++of an established association while the STA remains associated with ++the same AP. Reassociation is always initiated by the mobile STA. ++ ++5.4.3.1 Authentication ++... ++A STA may be authenticated with many other STAs at any given instant. ++ ++5.4.3.1.1 Preauthentication ++ ++Because the authentication process could be time-consuming (depending ++on the authentication protocol in use), the authentication service can ++be invoked independently of the association service. Preauthentication ++is typically done by a STA while it is already associated with an AP ++(with which it previously authenticated). IEEE 802.11 does not require ++that STAs preauthenticate with APs. However, authentication is required ++before an association can be established. If the authentication is left ++until reassociation time, this may impact the speed with which a STA can ++reassociate between APs, limiting BSS-transition mobility performance. ++The use of preauthentication takes the authentication service overhead ++out of the time-critical reassociation process. ++ ++5.7.3 Reassociation ++ ++For a STA to reassociate, the reassociation service causes the following ++message to occur: ++ ++ Reassociation request ++ ++* Message type: Management ++* Message subtype: Reassociation request ++* Information items: ++ - IEEE address of the STA ++ - IEEE address of the AP with which the STA will reassociate ++ - IEEE address of the AP with which the STA is currently associated ++ - ESSID ++* Direction of message: From STA to 'new' AP ++ ++The address of the current AP is included for efficiency. The inclusion ++of the current AP address facilitates MAC reassociation to be independent ++of the DS implementation. ++ ++ Reassociation response ++* Message type: Management ++* Message subtype: Reassociation response ++* Information items: ++ - Result of the requested reassociation. (success/failure) ++ - If the reassociation is successful, the response shall include the AID. ++* Direction of message: From AP to STA ++ ++7.2.3.6 Reassociation Request frame format ++ ++The frame body of a management frame of subtype Reassociation Request ++contains the information shown in Table 9. ++ ++Table 9 Reassociation Request frame body ++Order Information ++1 Capability information ++2 Listen interval ++3 Current AP address ++4 SSID ++5 Supported rates ++ ++7.2.3.7 Reassociation Response frame format ++ ++The frame body of a management frame of subtype Reassociation Response ++contains the information shown in Table 10. ++ ++Table 10 Reassociation Response frame body ++Order Information ++1 Capability information ++2 Status code ++3 Association ID (AID) ++4 Supported rates ++ ++*/ ++static int ++acx_l_transmit_reassocresp(acx_device_t *adev, const wlan_fr_reassocreq_t *req) ++{ ++ struct tx *tx; ++ struct wlan_hdr_mgmt *head; ++ struct reassocresp_frame_body *body; ++ u8 *p; ++ const u8 *da; ++ /* const u8 *sa; */ ++ const u8 *bssid; ++ client_t *clt; ++ ++ FN_ENTER; ++ ++ /* sa = req->hdr->a1; */ ++ da = req->hdr->a2; ++ bssid = req->hdr->a3; ++ ++ /* Must be already authenticated, so it must be in the list */ ++ clt = acx_l_sta_list_get(adev, da); ++ if (!clt) ++ goto ok; ++ ++ /* Assoc without auth is a big no-no */ ++ /* Already assoc'ed STAs sending ReAssoc req are ok per 802.11 */ ++ if (clt->used != CLIENT_AUTHENTICATED_2 ++ && clt->used != CLIENT_ASSOCIATED_3) { ++ acx_l_transmit_deauthen(adev, da, WLAN_MGMT_REASON_CLASS2_NONAUTH); ++ goto bad; ++ } ++ ++ clt->used = CLIENT_ASSOCIATED_3; ++ if (clt->aid == 0) { ++ clt->aid = ++adev->aid; ++ } ++ if (req->cap_info) ++ clt->cap_info = ieee2host16(*(req->cap_info)); ++ ++ /* We cheat here a bit. We don't really care which rates are flagged ++ ** as basic by the client, so we stuff them in single ratemask */ ++ clt->rate_cap = 0; ++ if (req->supp_rates) ++ add_bits_to_ratemasks(req->supp_rates->rates, ++ req->supp_rates->len, &clt->rate_cap, &clt->rate_cap); ++ if (req->ext_rates) ++ add_bits_to_ratemasks(req->ext_rates->rates, ++ req->ext_rates->len, &clt->rate_cap, &clt->rate_cap); ++ /* We can check that client supports all basic rates, ++ ** and deny assoc if not. But let's be liberal, right? ;) */ ++ clt->rate_cfg = clt->rate_cap & adev->rate_oper; ++ if (!clt->rate_cfg) clt->rate_cfg = 1 << lowest_bit(adev->rate_oper); ++ clt->rate_cur = 1 << lowest_bit(clt->rate_cfg); ++ if (IS_ACX100(adev)) ++ clt->rate_100 = acx_bitpos2rate100[lowest_bit(clt->rate_cfg)]; ++ ++ clt->fallback_count = clt->stepup_count = 0; ++ clt->ignore_count = 16; ++ ++ tx = acx_l_alloc_tx(adev); ++ if (!tx) ++ goto ok; ++ head = acx_l_get_txbuf(adev, tx); ++ if (!head) { ++ acx_l_dealloc_tx(adev, tx); ++ goto ok; ++ } ++ body = (void*)(head + 1); ++ ++ head->fc = WF_FSTYPE_REASSOCRESPi; ++ head->dur = req->hdr->dur; ++ MAC_COPY(head->da, da); ++ MAC_COPY(head->sa, adev->dev_addr); ++ MAC_COPY(head->bssid, bssid); ++ head->seq = req->hdr->seq; ++ ++ /* IEs: 1. caps */ ++ body->cap_info = host2ieee16(adev->capabilities); ++ /* 2. status code */ ++ body->status = host2ieee16(0); ++ /* 3. AID */ ++ body->aid = host2ieee16(clt->aid); ++ /* 4. supp rates */ ++ p = wlan_fill_ie_rates((u8*)&body->rates, adev->rate_supported_len, ++ adev->rate_supported); ++ /* 5. ext supp rates */ ++ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, ++ adev->rate_supported); ++ ++ acx_l_tx_data(adev, tx, p - (u8*)head); ++ok: ++ FN_EXIT1(OK); ++ return OK; ++bad: ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_disassoc_from_sta ++*/ ++static void ++acx_l_process_disassoc_from_sta(acx_device_t *adev, const wlan_fr_disassoc_t *req) ++{ ++ const u8 *ta; ++ client_t *clt; ++ ++ FN_ENTER; ++ ++ ta = req->hdr->a2; ++ clt = acx_l_sta_list_get(adev, ta); ++ if (!clt) ++ goto end; ++ ++ if (clt->used != CLIENT_ASSOCIATED_3 ++ && clt->used != CLIENT_AUTHENTICATED_2) { ++ /* it's disassociating, but it's ++ ** not even authenticated! Let it know that */ ++ acxlog_mac(L_ASSOC|L_XFER, "peer ", ta, "has sent disassoc " ++ "req but it is not even auth'ed! sending deauth\n"); ++ acx_l_transmit_deauthen(adev, ta, ++ WLAN_MGMT_REASON_CLASS2_NONAUTH); ++ clt->used = CLIENT_EXIST_1; ++ } else { ++ /* mark it as auth'ed only */ ++ clt->used = CLIENT_AUTHENTICATED_2; ++ } ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_deauthen_from_sta ++*/ ++static void ++acx_l_process_deauth_from_sta(acx_device_t *adev, const wlan_fr_deauthen_t *req) ++{ ++ const wlan_hdr_t *hdr; ++ client_t *client; ++ ++ FN_ENTER; ++ ++ hdr = req->hdr; ++ ++ if (acx_debug & L_ASSOC) { ++ acx_print_mac("got deauth from sta:", hdr->a2, " "); ++ acx_print_mac("a1:", hdr->a1, " "); ++ acx_print_mac("a3:", hdr->a3, " "); ++ acx_print_mac("adev->addr:", adev->dev_addr, " "); ++ acx_print_mac("adev->bssid:", adev->bssid, "\n"); ++ } ++ ++ if (!mac_is_equal(adev->dev_addr, hdr->a1)) { ++ goto end; ++ } ++ ++ client = acx_l_sta_list_get(adev, hdr->a2); ++ if (!client) { ++ goto end; ++ } ++ client->used = CLIENT_EXIST_1; ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_disassoc_from_ap ++*/ ++static void ++acx_l_process_disassoc_from_ap(acx_device_t *adev, const wlan_fr_disassoc_t *req) ++{ ++ FN_ENTER; ++ ++ if (!adev->ap_client) { ++ /* Hrm, we aren't assoc'ed yet anyhow... */ ++ goto end; ++ } ++ ++ printk("%s: got disassoc frame with reason %d (%s)\n", ++ adev->ndev->name, *req->reason, ++ acx_wlan_reason_str(*req->reason)); ++ ++ if (mac_is_equal(adev->dev_addr, req->hdr->a1)) { ++ acx_l_transmit_deauthen(adev, adev->bssid, ++ WLAN_MGMT_REASON_DEAUTH_LEAVING); ++ SET_BIT(adev->set_mask, GETSET_RESCAN); ++ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); ++ } ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_deauth_from_ap ++*/ ++static void ++acx_l_process_deauth_from_ap(acx_device_t *adev, const wlan_fr_deauthen_t *req) ++{ ++ FN_ENTER; ++ ++ if (!adev->ap_client) { ++ /* Hrm, we aren't assoc'ed yet anyhow... */ ++ goto end; ++ } ++ ++ printk("%s: got deauth frame with reason %d (%s)\n", ++ adev->ndev->name, *req->reason, ++ acx_wlan_reason_str(*req->reason)); ++ ++ /* Chk: is ta verified to be from our AP? */ ++ if (mac_is_equal(adev->dev_addr, req->hdr->a1)) { ++ log(L_DEBUG, "AP sent us deauth packet\n"); ++ SET_BIT(adev->set_mask, GETSET_RESCAN); ++ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); ++ } ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_l_rx ++** ++** The end of the Rx path. Pulls data from a rxhostdesc into a socket ++** buffer and feeds it to the network stack via netif_rx(). ++*/ ++static void ++acx_l_rx(acx_device_t *adev, rxbuffer_t *rxbuf) ++{ ++ FN_ENTER; ++ if (likely(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { ++ struct sk_buff *skb; ++ skb = acx_rxbuf_to_ether(adev, rxbuf); ++ if (likely(skb)) { ++ netif_rx(skb); ++ adev->ndev->last_rx = jiffies; ++ adev->stats.rx_packets++; ++ adev->stats.rx_bytes += skb->len; ++ } ++ } ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_data_frame_master ++*/ ++static int ++acx_l_process_data_frame_master(acx_device_t *adev, rxbuffer_t *rxbuf) ++{ ++ struct wlan_hdr *hdr; ++ struct tx *tx; ++ void *txbuf; ++ int len; ++ int result = NOT_OK; ++ ++ FN_ENTER; ++ ++ hdr = acx_get_wlan_hdr(adev, rxbuf); ++ ++ switch (WF_FC_FROMTODSi & hdr->fc) { ++ case 0: ++ case WF_FC_FROMDSi: ++ log(L_DEBUG, "ap->sta or adhoc->adhoc data frame ignored\n"); ++ goto done; ++ case WF_FC_TODSi: ++ break; ++ default: /* WF_FC_FROMTODSi */ ++ log(L_DEBUG, "wds data frame ignored (TODO)\n"); ++ goto done; ++ } ++ ++ /* check if it is our BSSID, if not, leave */ ++ if (!mac_is_equal(adev->bssid, hdr->a1)) { ++ goto done; ++ } ++ ++ if (mac_is_equal(adev->dev_addr, hdr->a3)) { ++ /* this one is for us */ ++ acx_l_rx(adev, rxbuf); ++ } else { ++ if (mac_is_bcast(hdr->a3)) { ++ /* this one is bcast, rx it too */ ++ acx_l_rx(adev, rxbuf); ++ } ++ tx = acx_l_alloc_tx(adev); ++ if (!tx) { ++ goto fail; ++ } ++ /* repackage, tx, and hope it someday reaches its destination */ ++ /* order is important, we do it in-place */ ++ MAC_COPY(hdr->a1, hdr->a3); ++ MAC_COPY(hdr->a3, hdr->a2); ++ MAC_COPY(hdr->a2, adev->bssid); ++ /* To_DS = 0, From_DS = 1 */ ++ hdr->fc = WF_FC_FROMDSi + WF_FTYPE_DATAi; ++ ++ txbuf = acx_l_get_txbuf(adev, tx); ++ if (txbuf) { ++ len = RXBUF_BYTES_RCVD(adev, rxbuf); ++ memcpy(txbuf, hdr, len); ++ acx_l_tx_data(adev, tx, len); ++ } else { ++ acx_l_dealloc_tx(adev, tx); ++ } ++ } ++done: ++ result = OK; ++fail: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_data_frame_client ++*/ ++static int ++acx_l_process_data_frame_client(acx_device_t *adev, rxbuffer_t *rxbuf) ++{ ++ const u8 *da, *bssid; ++ const wlan_hdr_t *hdr; ++ struct net_device *ndev = adev->ndev; ++ int result = NOT_OK; ++ ++ FN_ENTER; ++ ++ if (ACX_STATUS_4_ASSOCIATED != adev->status) ++ goto drop; ++ ++ hdr = acx_get_wlan_hdr(adev, rxbuf); ++ ++ switch (WF_FC_FROMTODSi & hdr->fc) { ++ case 0: ++ if (adev->mode != ACX_MODE_0_ADHOC) { ++ log(L_DEBUG, "adhoc->adhoc data frame ignored\n"); ++ goto drop; ++ } ++ bssid = hdr->a3; ++ break; ++ case WF_FC_FROMDSi: ++ if (adev->mode != ACX_MODE_2_STA) { ++ log(L_DEBUG, "ap->sta data frame ignored\n"); ++ goto drop; ++ } ++ bssid = hdr->a2; ++ break; ++ case WF_FC_TODSi: ++ log(L_DEBUG, "sta->ap data frame ignored\n"); ++ goto drop; ++ default: /* WF_FC_FROMTODSi: wds->wds */ ++ log(L_DEBUG, "wds data frame ignored (todo)\n"); ++ goto drop; ++ } ++ ++ da = hdr->a1; ++ ++ if (unlikely(acx_debug & L_DEBUG)) { ++ acx_print_mac("rx: da=", da, ""); ++ acx_print_mac(" bssid=", bssid, ""); ++ acx_print_mac(" adev->bssid=", adev->bssid, ""); ++ acx_print_mac(" adev->addr=", adev->dev_addr, "\n"); ++ } ++ ++ /* promiscuous mode --> receive all packets */ ++ if (unlikely(ndev->flags & IFF_PROMISC)) ++ goto process; ++ ++ /* FIRST, check if it is our BSSID */ ++ if (!mac_is_equal(adev->bssid, bssid)) { ++ /* is not our BSSID, so bail out */ ++ goto drop; ++ } ++ ++ /* then, check if it is our address */ ++ if (mac_is_equal(adev->dev_addr, da)) { ++ goto process; ++ } ++ ++ /* then, check if it is broadcast */ ++ if (mac_is_bcast(da)) { ++ goto process; ++ } ++ ++ if (mac_is_mcast(da)) { ++ /* unconditionally receive all multicasts */ ++ if (ndev->flags & IFF_ALLMULTI) ++ goto process; ++ ++ /* FIXME: need to check against the list of ++ * multicast addresses that are configured ++ * for the interface (ifconfig) */ ++ log(L_XFER, "FIXME: multicast packet, need to check " ++ "against a list of multicast addresses " ++ "(to be created!); accepting packet for now\n"); ++ /* for now, just accept it here */ ++ goto process; ++ } ++ ++ log(L_DEBUG, "rx: foreign packet, dropping\n"); ++ goto drop; ++process: ++ /* receive packet */ ++ acx_l_rx(adev, rxbuf); ++ ++ result = OK; ++drop: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_mgmt_frame ++** ++** Theory of operation: mgmt packet gets parsed (to make it easy ++** to access variable-sized IEs), results stored in 'parsed'. ++** Then we react to the packet. ++*/ ++typedef union parsed_mgmt_req { ++ wlan_fr_mgmt_t mgmt; ++ wlan_fr_assocreq_t assocreq; ++ wlan_fr_reassocreq_t reassocreq; ++ wlan_fr_assocresp_t assocresp; ++ wlan_fr_reassocresp_t reassocresp; ++ wlan_fr_beacon_t beacon; ++ wlan_fr_disassoc_t disassoc; ++ wlan_fr_authen_t authen; ++ wlan_fr_deauthen_t deauthen; ++ wlan_fr_proberesp_t proberesp; ++} parsed_mgmt_req_t; ++ ++void BUG_excessive_stack_usage(void); ++ ++static int ++acx_l_process_mgmt_frame(acx_device_t *adev, rxbuffer_t *rxbuf) ++{ ++ parsed_mgmt_req_t parsed; /* takes ~100 bytes of stack */ ++ wlan_hdr_t *hdr; ++ int adhoc, sta_scan, sta, ap; ++ int len; ++ ++ if (sizeof(parsed) > 256) ++ BUG_excessive_stack_usage(); ++ ++ FN_ENTER; ++ ++ hdr = acx_get_wlan_hdr(adev, rxbuf); ++ ++ /* Management frames never have these set */ ++ if (WF_FC_FROMTODSi & hdr->fc) { ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++ } ++ ++ len = RXBUF_BYTES_RCVD(adev, rxbuf); ++ if (WF_FC_ISWEPi & hdr->fc) ++ len -= 0x10; ++ ++ adhoc = (adev->mode == ACX_MODE_0_ADHOC); ++ sta_scan = ((adev->mode == ACX_MODE_2_STA) ++ && (adev->status != ACX_STATUS_4_ASSOCIATED)); ++ sta = ((adev->mode == ACX_MODE_2_STA) ++ && (adev->status == ACX_STATUS_4_ASSOCIATED)); ++ ap = (adev->mode == ACX_MODE_3_AP); ++ ++ switch (WF_FC_FSTYPEi & hdr->fc) { ++ /* beacons first, for speed */ ++ case WF_FSTYPE_BEACONi: ++ memset(&parsed.beacon, 0, sizeof(parsed.beacon)); ++ parsed.beacon.hdr = hdr; ++ parsed.beacon.len = len; ++ if (acx_debug & L_DATA) { ++ printk("beacon len:%d fc:%04X dur:%04X seq:%04X", ++ len, hdr->fc, hdr->dur, hdr->seq); ++ acx_print_mac(" a1:", hdr->a1, ""); ++ acx_print_mac(" a2:", hdr->a2, ""); ++ acx_print_mac(" a3:", hdr->a3, "\n"); ++ } ++ wlan_mgmt_decode_beacon(&parsed.beacon); ++ /* beacon and probe response are very similar, so... */ ++ acx_l_process_probe_response(adev, &parsed.beacon, rxbuf); ++ break; ++ case WF_FSTYPE_ASSOCREQi: ++ if (!ap) ++ break; ++ memset(&parsed.assocreq, 0, sizeof(parsed.assocreq)); ++ parsed.assocreq.hdr = hdr; ++ parsed.assocreq.len = len; ++ wlan_mgmt_decode_assocreq(&parsed.assocreq); ++ if (mac_is_equal(hdr->a1, adev->bssid) ++ && mac_is_equal(hdr->a3, adev->bssid)) { ++ acx_l_transmit_assocresp(adev, &parsed.assocreq); ++ } ++ break; ++ case WF_FSTYPE_REASSOCREQi: ++ if (!ap) ++ break; ++ memset(&parsed.assocreq, 0, sizeof(parsed.assocreq)); ++ parsed.assocreq.hdr = hdr; ++ parsed.assocreq.len = len; ++ wlan_mgmt_decode_assocreq(&parsed.assocreq); ++ /* reassocreq and assocreq are equivalent */ ++ acx_l_transmit_reassocresp(adev, &parsed.reassocreq); ++ break; ++ case WF_FSTYPE_ASSOCRESPi: ++ if (!sta_scan) ++ break; ++ memset(&parsed.assocresp, 0, sizeof(parsed.assocresp)); ++ parsed.assocresp.hdr = hdr; ++ parsed.assocresp.len = len; ++ wlan_mgmt_decode_assocresp(&parsed.assocresp); ++ acx_l_process_assocresp(adev, &parsed.assocresp); ++ break; ++ case WF_FSTYPE_REASSOCRESPi: ++ if (!sta_scan) ++ break; ++ memset(&parsed.assocresp, 0, sizeof(parsed.assocresp)); ++ parsed.assocresp.hdr = hdr; ++ parsed.assocresp.len = len; ++ wlan_mgmt_decode_assocresp(&parsed.assocresp); ++ acx_l_process_reassocresp(adev, &parsed.reassocresp); ++ break; ++ case WF_FSTYPE_PROBEREQi: ++ if (ap || adhoc) { ++ /* FIXME: since we're supposed to be an AP, ++ ** we need to return a Probe Response packet. ++ ** Currently firmware is doing it for us, ++ ** but firmware is buggy! See comment elsewhere --vda */ ++ } ++ break; ++ case WF_FSTYPE_PROBERESPi: ++ memset(&parsed.proberesp, 0, sizeof(parsed.proberesp)); ++ parsed.proberesp.hdr = hdr; ++ parsed.proberesp.len = len; ++ wlan_mgmt_decode_proberesp(&parsed.proberesp); ++ acx_l_process_probe_response(adev, &parsed.proberesp, rxbuf); ++ break; ++ case 6: ++ case 7: ++ /* exit */ ++ break; ++ case WF_FSTYPE_ATIMi: ++ /* exit */ ++ break; ++ case WF_FSTYPE_DISASSOCi: ++ if (!sta && !ap) ++ break; ++ memset(&parsed.disassoc, 0, sizeof(parsed.disassoc)); ++ parsed.disassoc.hdr = hdr; ++ parsed.disassoc.len = len; ++ wlan_mgmt_decode_disassoc(&parsed.disassoc); ++ if (sta) ++ acx_l_process_disassoc_from_ap(adev, &parsed.disassoc); ++ else ++ acx_l_process_disassoc_from_sta(adev, &parsed.disassoc); ++ break; ++ case WF_FSTYPE_AUTHENi: ++ if (!sta_scan && !ap) ++ break; ++ memset(&parsed.authen, 0, sizeof(parsed.authen)); ++ parsed.authen.hdr = hdr; ++ parsed.authen.len = len; ++ wlan_mgmt_decode_authen(&parsed.authen); ++ acx_l_process_authen(adev, &parsed.authen); ++ break; ++ case WF_FSTYPE_DEAUTHENi: ++ if (!sta && !ap) ++ break; ++ memset(&parsed.deauthen, 0, sizeof(parsed.deauthen)); ++ parsed.deauthen.hdr = hdr; ++ parsed.deauthen.len = len; ++ wlan_mgmt_decode_deauthen(&parsed.deauthen); ++ if (sta) ++ acx_l_process_deauth_from_ap(adev, &parsed.deauthen); ++ else ++ acx_l_process_deauth_from_sta(adev, &parsed.deauthen); ++ break; ++ } ++ ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++#ifdef UNUSED ++/*********************************************************************** ++** acx_process_class_frame ++** ++** Called from IRQ context only ++*/ ++static int ++acx_process_class_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala) ++{ ++ return OK; ++} ++#endif ++ ++ ++/*********************************************************************** ++** acx_l_process_NULL_frame ++*/ ++#ifdef BOGUS_ITS_NOT_A_NULL_FRAME_HANDLER_AT_ALL ++static int ++acx_l_process_NULL_frame(acx_device_t *adev, rxbuffer_t *rxbuf, int vala) ++{ ++ const signed char *esi; ++ const u8 *ebx; ++ const wlan_hdr_t *hdr; ++ const client_t *client; ++ int result = NOT_OK; ++ ++ hdr = acx_get_wlan_hdr(adev, rxbuf); ++ ++ switch (WF_FC_FROMTODSi & hdr->fc) { ++ case 0: ++ esi = hdr->a1; ++ ebx = hdr->a2; ++ break; ++ case WF_FC_FROMDSi: ++ esi = hdr->a1; ++ ebx = hdr->a3; ++ break; ++ case WF_FC_TODSi: ++ esi = hdr->a1; ++ ebx = hdr->a2; ++ break; ++ default: /* WF_FC_FROMTODSi */ ++ esi = hdr->a1; /* added by me! --vda */ ++ ebx = hdr->a2; ++ } ++ ++ if (esi[0x0] < 0) { ++ result = OK; ++ goto done; ++ } ++ ++ client = acx_l_sta_list_get(adev, ebx); ++ if (client) ++ result = NOT_OK; ++ else { ++#ifdef IS_IT_BROKEN ++ log(L_DEBUG|L_XFER, "\n"); ++ acx_l_transmit_deauthen(adev, ebx, ++ WLAN_MGMT_REASON_CLASS2_NONAUTH); ++#else ++ log(L_DEBUG, "received NULL frame from unknown client! " ++ "We really shouldn't send deauthen here, right?\n"); ++#endif ++ result = OK; ++ } ++done: ++ return result; ++} ++#endif ++ ++ ++/*********************************************************************** ++** acx_l_process_probe_response ++*/ ++static int ++acx_l_process_probe_response(acx_device_t *adev, wlan_fr_proberesp_t *req, ++ const rxbuffer_t *rxbuf) ++{ ++ struct client *bss; ++ wlan_hdr_t *hdr; ++ ++ FN_ENTER; ++ ++ hdr = req->hdr; ++ ++ if (mac_is_equal(hdr->a3, adev->dev_addr)) { ++ log(L_ASSOC, "huh, scan found our own MAC!?\n"); ++ goto ok; /* just skip this one silently */ ++ } ++ ++ bss = acx_l_sta_list_get_or_add(adev, hdr->a2); ++ ++ /* NB: be careful modifying bss data! It may be one ++ ** of the already known clients (like our AP if we are a STA) ++ ** Thus do not blindly modify e.g. current ratemask! */ ++ ++ if (STA_LIST_ADD_CAN_FAIL && !bss) { ++ /* uh oh, we found more sites/stations than we can handle with ++ * our current setup: pull the emergency brake and stop scanning! */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_STOP_SCAN); ++ /* TODO: a nice comment what below call achieves --vda */ ++ acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH); ++ goto ok; ++ } ++ /* NB: get_or_add already filled bss->address = hdr->a2 */ ++ MAC_COPY(bss->bssid, hdr->a3); ++ ++ /* copy the ESSID element */ ++ if (req->ssid && req->ssid->len <= IW_ESSID_MAX_SIZE) { ++ bss->essid_len = req->ssid->len; ++ memcpy(bss->essid, req->ssid->ssid, req->ssid->len); ++ bss->essid[req->ssid->len] = '\0'; ++ } else { ++ /* Either no ESSID IE or oversized one */ ++ printk("%s: received packet has bogus ESSID\n", ++ adev->ndev->name); ++ } ++ ++ if (req->ds_parms) ++ bss->channel = req->ds_parms->curr_ch; ++ if (req->cap_info) ++ bss->cap_info = ieee2host16(*req->cap_info); ++ ++ bss->sir = acx_signal_to_winlevel(rxbuf->phy_level); ++ bss->snr = acx_signal_to_winlevel(rxbuf->phy_snr); ++ ++ bss->rate_cap = 0; /* operational mask */ ++ bss->rate_bas = 0; /* basic mask */ ++ if (req->supp_rates) ++ add_bits_to_ratemasks(req->supp_rates->rates, ++ req->supp_rates->len, &bss->rate_bas, &bss->rate_cap); ++ if (req->ext_rates) ++ add_bits_to_ratemasks(req->ext_rates->rates, ++ req->ext_rates->len, &bss->rate_bas, &bss->rate_cap); ++ /* Fix up any possible bogosity - code elsewhere ++ * is not expecting empty masks */ ++ if (!bss->rate_cap) ++ bss->rate_cap = adev->rate_basic; ++ if (!bss->rate_bas) ++ bss->rate_bas = 1 << lowest_bit(bss->rate_cap); ++ if (!bss->rate_cur) ++ bss->rate_cur = 1 << lowest_bit(bss->rate_bas); ++ ++ /* People moan about this being too noisy at L_ASSOC */ ++ log(L_DEBUG, ++ "found %s: ESSID=\"%s\" ch=%d " ++ "BSSID="MACSTR" caps=0x%04X SIR=%d SNR=%d\n", ++ (bss->cap_info & WF_MGMT_CAP_IBSS) ? "Ad-Hoc peer" : "AP", ++ bss->essid, bss->channel, MAC(bss->bssid), bss->cap_info, ++ bss->sir, bss->snr); ++ok: ++ FN_EXIT0; ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_assocresp ++*/ ++static int ++acx_l_process_assocresp(acx_device_t *adev, const wlan_fr_assocresp_t *req) ++{ ++ const wlan_hdr_t *hdr; ++ int res = OK; ++ ++ FN_ENTER; ++ ++ hdr = req->hdr; ++ ++ if ((ACX_MODE_2_STA == adev->mode) ++ && mac_is_equal(adev->dev_addr, hdr->a1)) { ++ u16 st = ieee2host16(*(req->status)); ++ if (WLAN_MGMT_STATUS_SUCCESS == st) { ++ adev->aid = ieee2host16(*(req->aid)); ++ /* tell the card we are associated when ++ ** we are out of interrupt context */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_ASSOCIATE); ++ } else { ++ ++ /* TODO: we shall delete peer from sta_list, and try ++ ** other candidates... */ ++ ++ printk("%s: association FAILED: peer sent " ++ "Status Code %d (%s)\n", ++ adev->ndev->name, st, get_status_string(st)); ++ res = NOT_OK; ++ } ++ } ++ ++ FN_EXIT1(res); ++ return res; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_reassocresp ++*/ ++static int ++acx_l_process_reassocresp(acx_device_t *adev, const wlan_fr_reassocresp_t *req) ++{ ++ const wlan_hdr_t *hdr; ++ int result = NOT_OK; ++ u16 st; ++ ++ FN_ENTER; ++ ++ hdr = req->hdr; ++ ++ if (!mac_is_equal(adev->dev_addr, hdr->a1)) { ++ goto end; ++ } ++ st = ieee2host16(*(req->status)); ++ if (st == WLAN_MGMT_STATUS_SUCCESS) { ++ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); ++ result = OK; ++ } else { ++ printk("%s: reassociation FAILED: peer sent " ++ "response code %d (%s)\n", ++ adev->ndev->name, st, get_status_string(st)); ++ } ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_l_process_authen ++** ++** Called only in STA_SCAN or AP mode ++*/ ++static int ++acx_l_process_authen(acx_device_t *adev, const wlan_fr_authen_t *req) ++{ ++ const wlan_hdr_t *hdr; ++ client_t *clt; ++ wlan_ie_challenge_t *chal; ++ u16 alg, seq, status; ++ int ap, result; ++ ++ FN_ENTER; ++ ++ hdr = req->hdr; ++ ++ if (acx_debug & L_ASSOC) { ++ acx_print_mac("AUTHEN adev->addr=", adev->dev_addr, " "); ++ acx_print_mac("a1=", hdr->a1, " "); ++ acx_print_mac("a2=", hdr->a2, " "); ++ acx_print_mac("a3=", hdr->a3, " "); ++ acx_print_mac("adev->bssid=", adev->bssid, "\n"); ++ } ++ ++ if (!mac_is_equal(adev->dev_addr, hdr->a1) ++ || !mac_is_equal(adev->bssid, hdr->a3)) { ++ result = OK; ++ goto end; ++ } ++ ++ alg = ieee2host16(*(req->auth_alg)); ++ seq = ieee2host16(*(req->auth_seq)); ++ status = ieee2host16(*(req->status)); ++ ++ log(L_ASSOC, "auth algorithm %d, auth sequence %d, status %d\n", alg, seq, status); ++ ++ ap = (adev->mode == ACX_MODE_3_AP); ++ ++ if (adev->auth_alg <= 1) { ++ if (adev->auth_alg != alg) { ++ log(L_ASSOC, "auth algorithm mismatch: " ++ "our:%d peer:%d\n", adev->auth_alg, alg); ++ result = NOT_OK; ++ goto end; ++ } ++ } ++ if (ap) { ++ clt = acx_l_sta_list_get_or_add(adev, hdr->a2); ++ if (STA_LIST_ADD_CAN_FAIL && !clt) { ++ log(L_ASSOC, "could not allocate room for client\n"); ++ result = NOT_OK; ++ goto end; ++ } ++ } else { ++ clt = adev->ap_client; ++ if (!mac_is_equal(clt->address, hdr->a2)) { ++ printk("%s: malformed auth frame from AP?!\n", ++ adev->ndev->name); ++ result = NOT_OK; ++ goto end; ++ } ++ } ++ ++ /* now check which step in the authentication sequence we are ++ * currently in, and act accordingly */ ++ switch (seq) { ++ case 1: ++ if (!ap) ++ break; ++ acx_l_transmit_authen2(adev, req, clt); ++ break; ++ case 2: ++ if (ap) ++ break; ++ if (status == WLAN_MGMT_STATUS_SUCCESS) { ++ if (alg == WLAN_AUTH_ALG_OPENSYSTEM) { ++ acx_set_status(adev, ACX_STATUS_3_AUTHENTICATED); ++ acx_l_transmit_assoc_req(adev); ++ } else ++ if (alg == WLAN_AUTH_ALG_SHAREDKEY) { ++ acx_l_transmit_authen3(adev, req); ++ } ++ } else { ++ printk("%s: auth FAILED: peer sent " ++ "response code %d (%s), " ++ "still waiting for authentication\n", ++ adev->ndev->name, ++ status, get_status_string(status)); ++ acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH); ++ } ++ break; ++ case 3: ++ if (!ap) ++ break; ++ if ((clt->auth_alg != WLAN_AUTH_ALG_SHAREDKEY) ++ || (alg != WLAN_AUTH_ALG_SHAREDKEY) ++ || (clt->auth_step != 2)) ++ break; ++ chal = req->challenge; ++ if (!chal ++ || memcmp(chal->challenge, clt->challenge_text, WLAN_CHALLENGE_LEN) ++ || (chal->eid != WLAN_EID_CHALLENGE) ++ || (chal->len != WLAN_CHALLENGE_LEN) ++ ) ++ break; ++ acx_l_transmit_authen4(adev, req); ++ MAC_COPY(clt->address, hdr->a2); ++ clt->used = CLIENT_AUTHENTICATED_2; ++ clt->auth_step = 4; ++ clt->seq = ieee2host16(hdr->seq); ++ break; ++ case 4: ++ if (ap) ++ break; ++ /* ok, we're through: we're authenticated. Woohoo!! */ ++ acx_set_status(adev, ACX_STATUS_3_AUTHENTICATED); ++ log(L_ASSOC, "Authenticated!\n"); ++ /* now that we're authenticated, request association */ ++ acx_l_transmit_assoc_req(adev); ++ break; ++ } ++ result = OK; ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_gen_challenge ++*/ ++static inline void ++acx_gen_challenge(wlan_ie_challenge_t* d) ++{ ++ FN_ENTER; ++ d->eid = WLAN_EID_CHALLENGE; ++ d->len = WLAN_CHALLENGE_LEN; ++ get_random_bytes(d->challenge, WLAN_CHALLENGE_LEN); ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_l_transmit_deauthen ++*/ ++static int ++acx_l_transmit_deauthen(acx_device_t *adev, const u8 *addr, u16 reason) ++{ ++ struct tx *tx; ++ struct wlan_hdr_mgmt *head; ++ struct deauthen_frame_body *body; ++ ++ FN_ENTER; ++ ++ tx = acx_l_alloc_tx(adev); ++ if (!tx) ++ goto bad; ++ head = acx_l_get_txbuf(adev, tx); ++ if (!head) { ++ acx_l_dealloc_tx(adev, tx); ++ goto bad; ++ } ++ body = (void*)(head + 1); ++ ++ head->fc = (WF_FTYPE_MGMTi | WF_FSTYPE_DEAUTHENi); ++ head->dur = 0; ++ MAC_COPY(head->da, addr); ++ MAC_COPY(head->sa, adev->dev_addr); ++ MAC_COPY(head->bssid, adev->bssid); ++ head->seq = 0; ++ ++ log(L_DEBUG|L_ASSOC|L_XFER, ++ "sending deauthen to "MACSTR" for %d\n", ++ MAC(addr), reason); ++ ++ body->reason = host2ieee16(reason); ++ ++ /* body is fixed size here, but beware of cutting-and-pasting this - ++ ** do not use sizeof(*body) for variable sized mgmt packets! */ ++ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + sizeof(*body)); ++ ++ FN_EXIT1(OK); ++ return OK; ++bad: ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++** acx_l_transmit_authen1 ++*/ ++static int ++acx_l_transmit_authen1(acx_device_t *adev) ++{ ++ struct tx *tx; ++ struct wlan_hdr_mgmt *head; ++ struct auth_frame_body *body; ++ ++ FN_ENTER; ++ ++ log(L_ASSOC, "sending authentication1 request (auth algo %d), " ++ "awaiting response\n", adev->auth_alg); ++ ++ tx = acx_l_alloc_tx(adev); ++ if (!tx) ++ goto bad; ++ head = acx_l_get_txbuf(adev, tx); ++ if (!head) { ++ acx_l_dealloc_tx(adev, tx); ++ goto bad; ++ } ++ body = (void*)(head + 1); ++ ++ head->fc = WF_FSTYPE_AUTHENi; ++ /* duration should be 0 instead of 0x8000 to have ++ * the firmware calculate the value, right? */ ++ head->dur = 0; ++ MAC_COPY(head->da, adev->bssid); ++ MAC_COPY(head->sa, adev->dev_addr); ++ MAC_COPY(head->bssid, adev->bssid); ++ head->seq = 0; ++ ++ body->auth_alg = host2ieee16(adev->auth_alg); ++ body->auth_seq = host2ieee16(1); ++ body->status = host2ieee16(0); ++ ++ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + 2 + 2 + 2); ++ ++ FN_EXIT1(OK); ++ return OK; ++bad: ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++** acx_l_transmit_authen2 ++*/ ++static int ++acx_l_transmit_authen2(acx_device_t *adev, const wlan_fr_authen_t *req, ++ client_t *clt) ++{ ++ struct tx *tx; ++ struct wlan_hdr_mgmt *head; ++ struct auth_frame_body *body; ++ unsigned int packet_len; ++ ++ FN_ENTER; ++ ++ if (!clt) ++ goto ok; ++ ++ MAC_COPY(clt->address, req->hdr->a2); ++#ifdef UNUSED ++ clt->ps = ((WF_FC_PWRMGTi & req->hdr->fc) != 0); ++#endif ++ clt->auth_alg = ieee2host16(*(req->auth_alg)); ++ clt->auth_step = 2; ++ clt->seq = ieee2host16(req->hdr->seq); ++ ++ tx = acx_l_alloc_tx(adev); ++ if (!tx) ++ goto bad; ++ head = acx_l_get_txbuf(adev, tx); ++ if (!head) { ++ acx_l_dealloc_tx(adev, tx); ++ goto bad; ++ } ++ body = (void*)(head + 1); ++ ++ head->fc = WF_FSTYPE_AUTHENi; ++ head->dur = 0 /* req->hdr->dur */; ++ MAC_COPY(head->da, req->hdr->a2); ++ MAC_COPY(head->sa, adev->dev_addr); ++ MAC_COPY(head->bssid, req->hdr->a3); ++ head->seq = 0 /* req->hdr->seq */; ++ ++ /* already in IEEE format, no endianness conversion */ ++ body->auth_alg = *(req->auth_alg); ++ body->auth_seq = host2ieee16(2); ++ body->status = host2ieee16(0); ++ ++ packet_len = WLAN_HDR_A3_LEN + 2 + 2 + 2; ++ if (ieee2host16(*(req->auth_alg)) == WLAN_AUTH_ALG_OPENSYSTEM) { ++ clt->used = CLIENT_AUTHENTICATED_2; ++ } else { /* shared key */ ++ acx_gen_challenge(&body->challenge); ++ memcpy(&clt->challenge_text, body->challenge.challenge, WLAN_CHALLENGE_LEN); ++ packet_len += 2 + 2 + 2 + 1+1+WLAN_CHALLENGE_LEN; ++ } ++ ++ acxlog_mac(L_ASSOC|L_XFER, ++ "transmit_auth2: BSSID=", head->bssid, "\n"); ++ ++ acx_l_tx_data(adev, tx, packet_len); ++ok: ++ FN_EXIT1(OK); ++ return OK; ++bad: ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++** acx_l_transmit_authen3 ++*/ ++static int ++acx_l_transmit_authen3(acx_device_t *adev, const wlan_fr_authen_t *req) ++{ ++ struct tx *tx; ++ struct wlan_hdr_mgmt *head; ++ struct auth_frame_body *body; ++ unsigned int packet_len; ++ ++ FN_ENTER; ++ ++ tx = acx_l_alloc_tx(adev); ++ if (!tx) ++ goto ok; ++ head = acx_l_get_txbuf(adev, tx); ++ if (!head) { ++ acx_l_dealloc_tx(adev, tx); ++ goto ok; ++ } ++ body = (void*)(head + 1); ++ ++ /* add WF_FC_ISWEPi: auth step 3 needs to be encrypted */ ++ head->fc = WF_FC_ISWEPi + WF_FSTYPE_AUTHENi; ++ /* FIXME: is this needed?? authen4 does it... ++ * I think it's even wrong since we shouldn't re-use old ++ * values but instead let the firmware calculate proper ones ++ head->dur = req->hdr->dur; ++ head->seq = req->hdr->seq; ++ */ ++ MAC_COPY(head->da, adev->bssid); ++ MAC_COPY(head->sa, adev->dev_addr); ++ MAC_COPY(head->bssid, adev->bssid); ++ ++ /* already in IEEE format, no endianness conversion */ ++ body->auth_alg = *(req->auth_alg); ++ body->auth_seq = host2ieee16(3); ++ body->status = host2ieee16(0); ++ memcpy(&body->challenge, req->challenge, req->challenge->len + 2); ++ packet_len = WLAN_HDR_A3_LEN + 8 + req->challenge->len; ++ ++ log(L_ASSOC|L_XFER, "transmit_authen3!\n"); ++ ++ acx_l_tx_data(adev, tx, packet_len); ++ok: ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_l_transmit_authen4 ++*/ ++static int ++acx_l_transmit_authen4(acx_device_t *adev, const wlan_fr_authen_t *req) ++{ ++ struct tx *tx; ++ struct wlan_hdr_mgmt *head; ++ struct auth_frame_body *body; ++ ++ FN_ENTER; ++ ++ tx = acx_l_alloc_tx(adev); ++ if (!tx) ++ goto ok; ++ head = acx_l_get_txbuf(adev, tx); ++ if (!head) { ++ acx_l_dealloc_tx(adev, tx); ++ goto ok; ++ } ++ body = (void*)(head + 1); ++ ++ head->fc = WF_FSTYPE_AUTHENi; /* 0xb0 */ ++ head->dur = 0 /* req->hdr->dur */; ++ MAC_COPY(head->da, req->hdr->a2); ++ MAC_COPY(head->sa, adev->dev_addr); ++ MAC_COPY(head->bssid, req->hdr->a3); ++ head->seq = 0 /* req->hdr->seq */; ++ ++ /* already in IEEE format, no endianness conversion */ ++ body->auth_alg = *(req->auth_alg); ++ body->auth_seq = host2ieee16(4); ++ body->status = host2ieee16(0); ++ ++ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + 2 + 2 + 2); ++ok: ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_l_transmit_assoc_req ++** ++** adev->ap_client is a current candidate AP here ++*/ ++static int ++acx_l_transmit_assoc_req(acx_device_t *adev) ++{ ++ struct tx *tx; ++ struct wlan_hdr_mgmt *head; ++ u8 *body, *p, *prate; ++ unsigned int packet_len; ++ u16 cap; ++ ++ FN_ENTER; ++ ++ log(L_ASSOC, "sending association request, " ++ "awaiting response. NOT ASSOCIATED YET\n"); ++ tx = acx_l_alloc_tx(adev); ++ if (!tx) ++ goto bad; ++ head = acx_l_get_txbuf(adev, tx); ++ if (!head) { ++ acx_l_dealloc_tx(adev, tx); ++ goto bad; ++ } ++ body = (void*)(head + 1); ++ ++ head->fc = WF_FSTYPE_ASSOCREQi; ++ head->dur = host2ieee16(0x8000); ++ MAC_COPY(head->da, adev->bssid); ++ MAC_COPY(head->sa, adev->dev_addr); ++ MAC_COPY(head->bssid, adev->bssid); ++ head->seq = 0; ++ ++ p = body; ++ /* now start filling the AssocReq frame body */ ++ ++ /* since this assoc request will most likely only get ++ * sent in the STA to AP case (and not when Ad-Hoc IBSS), ++ * the cap combination indicated here will thus be ++ * WF_MGMT_CAP_ESSi *always* (no IBSS ever) ++ * The specs are more than non-obvious on all that: ++ * ++ * 802.11 7.3.1.4 Capability Information field ++ ** APs set the ESS subfield to 1 and the IBSS subfield to 0 within ++ ** Beacon or Probe Response management frames. STAs within an IBSS ++ ** set the ESS subfield to 0 and the IBSS subfield to 1 in transmitted ++ ** Beacon or Probe Response management frames ++ ** ++ ** APs set the Privacy subfield to 1 within transmitted Beacon, ++ ** Probe Response, Association Response, and Reassociation Response ++ ** if WEP is required for all data type frames within the BSS. ++ ** STAs within an IBSS set the Privacy subfield to 1 in Beacon ++ ** or Probe Response management frames if WEP is required ++ ** for all data type frames within the IBSS */ ++ ++ /* note that returning 0 will be refused by several APs... ++ * (so this indicates that you're probably supposed to ++ * "confirm" the ESS mode) */ ++ cap = WF_MGMT_CAP_ESSi; ++ ++ /* this one used to be a check on wep_restricted, ++ * but more likely it's wep_enabled instead */ ++ if (adev->wep_enabled) ++ SET_BIT(cap, WF_MGMT_CAP_PRIVACYi); ++ ++ /* Probably we can just set these always, because our hw is ++ ** capable of shortpre and PBCC --vda */ ++ /* only ask for short preamble if the peer station supports it */ ++ if (adev->ap_client->cap_info & WF_MGMT_CAP_SHORT) ++ SET_BIT(cap, WF_MGMT_CAP_SHORTi); ++ /* only ask for PBCC support if the peer station supports it */ ++ if (adev->ap_client->cap_info & WF_MGMT_CAP_PBCC) ++ SET_BIT(cap, WF_MGMT_CAP_PBCCi); ++ ++ /* IEs: 1. caps */ ++ *(u16*)p = cap; p += 2; ++ /* 2. listen interval */ ++ *(u16*)p = host2ieee16(adev->listen_interval); p += 2; ++ /* 3. ESSID */ ++ p = wlan_fill_ie_ssid(p, ++ strlen(adev->essid_for_assoc), adev->essid_for_assoc); ++ /* 4. supp rates */ ++ prate = p; ++ p = wlan_fill_ie_rates(p, ++ adev->rate_supported_len, adev->rate_supported); ++ /* 5. ext supp rates */ ++ p = wlan_fill_ie_rates_ext(p, ++ adev->rate_supported_len, adev->rate_supported); ++ ++ if (acx_debug & L_DEBUG) { ++ printk("association: rates element\n"); ++ acx_dump_bytes(prate, p - prate); ++ } ++ ++ /* calculate lengths */ ++ packet_len = WLAN_HDR_A3_LEN + (p - body); ++ ++ log(L_ASSOC, "association: requesting caps 0x%04X, ESSID \"%s\"\n", ++ cap, adev->essid_for_assoc); ++ ++ acx_l_tx_data(adev, tx, packet_len); ++ FN_EXIT1(OK); ++ return OK; ++bad: ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++** acx_l_transmit_disassoc ++** ++** FIXME: looks like incomplete implementation of a helper: ++** acx_l_transmit_disassoc(adev, clt) - kick this client (we're an AP) ++** acx_l_transmit_disassoc(adev, NULL) - leave BSSID (we're a STA) ++*/ ++#ifdef BROKEN ++int ++acx_l_transmit_disassoc(acx_device_t *adev, client_t *clt) ++{ ++ struct tx *tx; ++ struct wlan_hdr_mgmt *head; ++ struct disassoc_frame_body *body; ++ ++ FN_ENTER; ++/* if (clt != NULL) { */ ++ tx = acx_l_alloc_tx(adev); ++ if (!tx) ++ goto bad; ++ head = acx_l_get_txbuf(adev, tx); ++ if (!head) { ++ acx_l_dealloc_tx(adev, tx); ++ goto bad; ++ } ++ body = (void*)(head + 1); ++ ++/* clt->used = CLIENT_AUTHENTICATED_2; - not (yet?) associated */ ++ ++ head->fc = WF_FSTYPE_DISASSOCi; ++ head->dur = 0; ++ /* huh? It muchly depends on whether we're STA or AP... ++ ** sta->ap: da=bssid, sa=own, bssid=bssid ++ ** ap->sta: da=sta, sa=bssid, bssid=bssid. FIXME! */ ++ MAC_COPY(head->da, adev->bssid); ++ MAC_COPY(head->sa, adev->dev_addr); ++ MAC_COPY(head->bssid, adev->dev_addr); ++ head->seq = 0; ++ ++ /* "Class 3 frame received from nonassociated station." */ ++ body->reason = host2ieee16(7); ++ ++ /* fixed size struct, ok to sizeof */ ++ acx_l_tx_data(adev, tx, WLAN_HDR_A3_LEN + sizeof(*body)); ++/* } */ ++ FN_EXIT1(OK); ++ return OK; ++bad: ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++#endif ++ ++ ++/*********************************************************************** ++** acx_s_complete_scan ++** ++** Called either from after_interrupt_task() if: ++** 1) there was Scan_Complete IRQ, or ++** 2) scanning expired in timer() ++** We need to decide which ESS or IBSS to join. ++** Iterates thru adev->sta_list: ++** if adev->ap is not bcast, will join only specified ++** ESS or IBSS with this bssid ++** checks peers' caps for ESS/IBSS bit ++** checks peers' SSID, allows exact match or hidden SSID ++** If station to join is chosen: ++** points adev->ap_client to the chosen struct client ++** sets adev->essid_for_assoc for future assoc attempt ++** Auth/assoc is not yet performed ++** Returns OK if there is no need to restart scan ++*/ ++int ++acx_s_complete_scan(acx_device_t *adev) ++{ ++ struct client *bss; ++ unsigned long flags; ++ u16 needed_cap; ++ int i; ++ int idx_found = -1; ++ int result = OK; ++ ++ FN_ENTER; ++ ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ needed_cap = WF_MGMT_CAP_IBSS; /* 2, we require Ad-Hoc */ ++ break; ++ case ACX_MODE_2_STA: ++ needed_cap = WF_MGMT_CAP_ESS; /* 1, we require Managed */ ++ break; ++ default: ++ printk("acx: driver bug: mode=%d in complete_scan()\n", adev->mode); ++ dump_stack(); ++ goto end; ++ } ++ ++ acx_lock(adev, flags); ++ ++ /* TODO: sta_iterator hiding implementation would be nice here... */ ++ ++ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { ++ bss = &adev->sta_list[i]; ++ if (!bss->used) continue; ++ ++ ++ log(L_ASSOC, "scan table: SSID=\"%s\" CH=%d SIR=%d SNR=%d\n", ++ bss->essid, bss->channel, bss->sir, bss->snr); ++ ++ if (!mac_is_bcast(adev->ap)) ++ if (!mac_is_equal(bss->bssid, adev->ap)) ++ continue; /* keep looking */ ++ ++ /* broken peer with no mode flags set? */ ++ if (unlikely(!(bss->cap_info & (WF_MGMT_CAP_ESS | WF_MGMT_CAP_IBSS)))) { ++ printk("%s: strange peer "MACSTR" found with " ++ "neither ESS (AP) nor IBSS (Ad-Hoc) " ++ "capability - skipped\n", ++ adev->ndev->name, MAC(bss->address)); ++ continue; ++ } ++ log(L_ASSOC, "peer_cap 0x%04X, needed_cap 0x%04X\n", ++ bss->cap_info, needed_cap); ++ ++ /* does peer station support what we need? */ ++ if ((bss->cap_info & needed_cap) != needed_cap) ++ continue; /* keep looking */ ++ ++ /* strange peer with NO basic rates?! */ ++ if (unlikely(!bss->rate_bas)) { ++ printk("%s: strange peer "MACSTR" with empty rate set " ++ "- skipped\n", ++ adev->ndev->name, MAC(bss->address)); ++ continue; ++ } ++ ++ /* do we support all basic rates of this peer? */ ++ if ((bss->rate_bas & adev->rate_oper) != bss->rate_bas) { ++/* we probably need to have all rates as operational rates, ++ even in case of an 11M-only configuration */ ++#ifdef THIS_IS_TROUBLESOME ++ printk("%s: peer "MACSTR": incompatible basic rates " ++ "(AP requests 0x%04X, we have 0x%04X) " ++ "- skipped\n", ++ adev->ndev->name, MAC(bss->address), ++ bss->rate_bas, adev->rate_oper); ++ continue; ++#else ++ printk("%s: peer "MACSTR": incompatible basic rates " ++ "(AP requests 0x%04X, we have 0x%04X). " ++ "Considering anyway...\n", ++ adev->ndev->name, MAC(bss->address), ++ bss->rate_bas, adev->rate_oper); ++#endif ++ } ++ ++ if ( !(adev->reg_dom_chanmask & (1<<(bss->channel-1))) ) { ++ printk("%s: warning: peer "MACSTR" is on channel %d " ++ "outside of channel range of current " ++ "regulatory domain - couldn't join " ++ "even if other settings match. " ++ "You might want to adapt your config\n", ++ adev->ndev->name, MAC(bss->address), ++ bss->channel); ++ continue; /* keep looking */ ++ } ++ ++ if (!adev->essid_active || !strcmp(bss->essid, adev->essid)) { ++ log(L_ASSOC, ++ "found station with matching ESSID! ('%s' " ++ "station, '%s' config)\n", ++ bss->essid, ++ (adev->essid_active) ? adev->essid : "[any]"); ++ /* TODO: continue looking for peer with better SNR */ ++ bss->used = CLIENT_JOIN_CANDIDATE; ++ idx_found = i; ++ ++ /* stop searching if this station is ++ * on the current channel, otherwise ++ * keep looking for an even better match */ ++ if (bss->channel == adev->channel) ++ break; ++ } else ++ if (is_hidden_essid(bss->essid)) { ++ /* hmm, station with empty or single-space SSID: ++ * using hidden SSID broadcast? ++ */ ++ /* This behaviour is broken: which AP from zillion ++ ** of APs with hidden SSID you'd try? ++ ** We should use Probe requests to get Probe responses ++ ** and check for real SSID (are those never hidden?) */ ++ bss->used = CLIENT_JOIN_CANDIDATE; ++ if (idx_found == -1) ++ idx_found = i; ++ log(L_ASSOC, "found station with empty or " ++ "single-space (hidden) SSID, considering " ++ "for assoc attempt\n"); ++ /* ...and keep looking for better matches */ ++ } else { ++ log(L_ASSOC, "ESSID doesn't match! ('%s' " ++ "station, '%s' config)\n", ++ bss->essid, ++ (adev->essid_active) ? adev->essid : "[any]"); ++ } ++ } ++ ++ /* TODO: iterate thru join candidates instead */ ++ /* TODO: rescan if not associated within some timeout */ ++ if (idx_found != -1) { ++ char *essid_src; ++ size_t essid_len; ++ ++ bss = &adev->sta_list[idx_found]; ++ adev->ap_client = bss; ++ ++ if (is_hidden_essid(bss->essid)) { ++ /* if the ESSID of the station we found is empty ++ * (no broadcast), then use user-configured ESSID ++ * instead */ ++ essid_src = adev->essid; ++ essid_len = adev->essid_len; ++ } else { ++ essid_src = bss->essid; ++ essid_len = strlen(bss->essid); ++ } ++ ++ acx_update_capabilities(adev); ++ ++ memcpy(adev->essid_for_assoc, essid_src, essid_len); ++ adev->essid_for_assoc[essid_len] = '\0'; ++ adev->channel = bss->channel; ++ MAC_COPY(adev->bssid, bss->bssid); ++ ++ bss->rate_cfg = (bss->rate_cap & adev->rate_oper); ++ bss->rate_cur = 1 << lowest_bit(bss->rate_cfg); ++ bss->rate_100 = acx_rate111to100(bss->rate_cur); ++ ++ acxlog_mac(L_ASSOC, ++ "matching station found: ", adev->bssid, ", joining\n"); ++ ++ /* TODO: do we need to switch to the peer's channel first? */ ++ ++ if (ACX_MODE_0_ADHOC == adev->mode) { ++ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); ++ } else { ++ acx_l_transmit_authen1(adev); ++ acx_set_status(adev, ACX_STATUS_2_WAIT_AUTH); ++ } ++ } else { /* idx_found == -1 */ ++ /* uh oh, no station found in range */ ++ if (ACX_MODE_0_ADHOC == adev->mode) { ++ printk("%s: no matching station found in range, " ++ "generating our own IBSS instead\n", ++ adev->ndev->name); ++ /* we do it the HostAP way: */ ++ MAC_COPY(adev->bssid, adev->dev_addr); ++ adev->bssid[0] |= 0x02; /* 'local assigned addr' bit */ ++ /* add IBSS bit to our caps... */ ++ acx_update_capabilities(adev); ++ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); ++ /* In order to cmd_join be called below */ ++ idx_found = 0; ++ } else { ++ /* we shall scan again, AP can be ++ ** just temporarily powered off */ ++ log(L_ASSOC, ++ "no matching station found in range yet\n"); ++ acx_set_status(adev, ACX_STATUS_1_SCANNING); ++ result = NOT_OK; ++ } ++ } ++ ++ acx_unlock(adev, flags); ++ ++ if (idx_found != -1) { ++ if (ACX_MODE_0_ADHOC == adev->mode) { ++ /* need to update channel in beacon template */ ++ SET_BIT(adev->set_mask, SET_TEMPLATES); ++ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) ++ acx_s_update_card_settings(adev); ++ } ++ /* Inform firmware on our decision to start or join BSS */ ++ acx_s_cmd_join_bssid(adev, adev->bssid); ++ } ++ ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_s_read_fw ++** ++** Loads a firmware image ++** ++** Returns: ++** 0 unable to load file ++** pointer to firmware success ++*/ ++firmware_image_t* ++acx_s_read_fw(struct device *dev, const char *file, u32 *size) ++{ ++ firmware_image_t *res; ++ const struct firmware *fw_entry; ++ ++ res = NULL; ++ log(L_INIT, "requesting firmware image '%s'\n", file); ++ if (!request_firmware(&fw_entry, file, dev)) { ++ *size = 8; ++ if (fw_entry->size >= 8) ++ *size = 8 + le32_to_cpu(*(u32 *)(fw_entry->data + 4)); ++ if (fw_entry->size != *size) { ++ printk("acx: firmware size does not match " ++ "firmware header: %d != %d, " ++ "aborting fw upload\n", ++ (int) fw_entry->size, (int) *size); ++ goto release_ret; ++ } ++ res = vmalloc(*size); ++ if (!res) { ++ printk("acx: no memory for firmware " ++ "(%u bytes)\n", *size); ++ goto release_ret; ++ } ++ memcpy(res, fw_entry->data, fw_entry->size); ++release_ret: ++ release_firmware(fw_entry); ++ return res; ++ } ++ printk("acx: firmware image '%s' was not provided. " ++ "Check your hotplug scripts\n", file); ++ ++ /* checksum will be verified in write_fw, so don't bother here */ ++ return res; ++} ++ ++ ++/*********************************************************************** ++** acx_s_set_wepkey ++*/ ++static void ++acx100_s_set_wepkey(acx_device_t *adev) ++{ ++ ie_dot11WEPDefaultKey_t dk; ++ int i; ++ ++ for (i = 0; i < DOT11_MAX_DEFAULT_WEP_KEYS; i++) { ++ if (adev->wep_keys[i].size != 0) { ++ log(L_INIT, "setting WEP key: %d with " ++ "total size: %d\n", i, (int) adev->wep_keys[i].size); ++ dk.action = 1; ++ dk.keySize = adev->wep_keys[i].size; ++ dk.defaultKeyNum = i; ++ memcpy(dk.key, adev->wep_keys[i].key, dk.keySize); ++ acx_s_configure(adev, &dk, ACX100_IE_DOT11_WEP_DEFAULT_KEY_WRITE); ++ } ++ } ++} ++ ++static void ++acx111_s_set_wepkey(acx_device_t *adev) ++{ ++ acx111WEPDefaultKey_t dk; ++ int i; ++ ++ for (i = 0; i < DOT11_MAX_DEFAULT_WEP_KEYS; i++) { ++ if (adev->wep_keys[i].size != 0) { ++ log(L_INIT, "setting WEP key: %d with " ++ "total size: %d\n", i, (int) adev->wep_keys[i].size); ++ memset(&dk, 0, sizeof(dk)); ++ dk.action = cpu_to_le16(1); /* "add key"; yes, that's a 16bit value */ ++ dk.keySize = adev->wep_keys[i].size; ++ ++ /* are these two lines necessary? */ ++ dk.type = 0; /* default WEP key */ ++ dk.index = 0; /* ignored when setting default key */ ++ ++ dk.defaultKeyNum = i; ++ memcpy(dk.key, adev->wep_keys[i].key, dk.keySize); ++ acx_s_issue_cmd(adev, ACX1xx_CMD_WEP_MGMT, &dk, sizeof(dk)); ++ } ++ } ++} ++ ++static void ++acx_s_set_wepkey(acx_device_t *adev) ++{ ++ if (IS_ACX111(adev)) ++ acx111_s_set_wepkey(adev); ++ else ++ acx100_s_set_wepkey(adev); ++} ++ ++ ++/*********************************************************************** ++** acx100_s_init_wep ++** ++** FIXME: this should probably be moved into the new card settings ++** management, but since we're also modifying the memory map layout here ++** due to the WEP key space we want, we should take care... ++*/ ++static int ++acx100_s_init_wep(acx_device_t *adev) ++{ ++ acx100_ie_wep_options_t options; ++ ie_dot11WEPDefaultKeyID_t dk; ++ acx_ie_memmap_t pt; ++ int res = NOT_OK; ++ ++ FN_ENTER; ++ ++ if (OK != acx_s_interrogate(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { ++ goto fail; ++ } ++ ++ log(L_DEBUG, "CodeEnd:%X\n", pt.CodeEnd); ++ ++ pt.WEPCacheStart = cpu_to_le32(le32_to_cpu(pt.CodeEnd) + 0x4); ++ pt.WEPCacheEnd = cpu_to_le32(le32_to_cpu(pt.CodeEnd) + 0x4); ++ ++ if (OK != acx_s_configure(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { ++ goto fail; ++ } ++ ++ /* let's choose maximum setting: 4 default keys, plus 10 other keys: */ ++ options.NumKeys = cpu_to_le16(DOT11_MAX_DEFAULT_WEP_KEYS + 10); ++ options.WEPOption = 0x00; ++ ++ log(L_ASSOC, "%s: writing WEP options\n", __func__); ++ acx_s_configure(adev, &options, ACX100_IE_WEP_OPTIONS); ++ ++ acx100_s_set_wepkey(adev); ++ ++ if (adev->wep_keys[adev->wep_current_index].size != 0) { ++ log(L_ASSOC, "setting active default WEP key number: %d\n", ++ adev->wep_current_index); ++ dk.KeyID = adev->wep_current_index; ++ acx_s_configure(adev, &dk, ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET); /* 0x1010 */ ++ } ++ /* FIXME!!! wep_key_struct is filled nowhere! But adev ++ * is initialized to 0, and we don't REALLY need those keys either */ ++/* for (i = 0; i < 10; i++) { ++ if (adev->wep_key_struct[i].len != 0) { ++ MAC_COPY(wep_mgmt.MacAddr, adev->wep_key_struct[i].addr); ++ wep_mgmt.KeySize = cpu_to_le16(adev->wep_key_struct[i].len); ++ memcpy(&wep_mgmt.Key, adev->wep_key_struct[i].key, le16_to_cpu(wep_mgmt.KeySize)); ++ wep_mgmt.Action = cpu_to_le16(1); ++ log(L_ASSOC, "writing WEP key %d (len %d)\n", i, le16_to_cpu(wep_mgmt.KeySize)); ++ if (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_WEP_MGMT, &wep_mgmt, sizeof(wep_mgmt))) { ++ adev->wep_key_struct[i].index = i; ++ } ++ } ++ } ++*/ ++ ++ /* now retrieve the updated WEPCacheEnd pointer... */ ++ if (OK != acx_s_interrogate(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { ++ printk("%s: ACX1xx_IE_MEMORY_MAP read #2 FAILED\n", ++ adev->ndev->name); ++ goto fail; ++ } ++ /* ...and tell it to start allocating templates at that location */ ++ /* (no endianness conversion needed) */ ++ pt.PacketTemplateStart = pt.WEPCacheEnd; ++ ++ if (OK != acx_s_configure(adev, &pt, ACX1xx_IE_MEMORY_MAP)) { ++ printk("%s: ACX1xx_IE_MEMORY_MAP write #2 FAILED\n", ++ adev->ndev->name); ++ goto fail; ++ } ++ res = OK; ++ ++fail: ++ FN_EXIT1(res); ++ return res; ++} ++ ++ ++static int ++acx_s_init_max_template_generic(acx_device_t *adev, unsigned int len, unsigned int cmd) ++{ ++ int res; ++ union { ++ acx_template_nullframe_t null; ++ acx_template_beacon_t b; ++ acx_template_tim_t tim; ++ acx_template_probereq_t preq; ++ acx_template_proberesp_t presp; ++ } templ; ++ ++ memset(&templ, 0, len); ++ templ.null.size = cpu_to_le16(len - 2); ++ res = acx_s_issue_cmd(adev, cmd, &templ, len); ++ return res; ++} ++ ++static inline int ++acx_s_init_max_null_data_template(acx_device_t *adev) ++{ ++ return acx_s_init_max_template_generic( ++ adev, sizeof(acx_template_nullframe_t), ACX1xx_CMD_CONFIG_NULL_DATA ++ ); ++} ++ ++static inline int ++acx_s_init_max_beacon_template(acx_device_t *adev) ++{ ++ return acx_s_init_max_template_generic( ++ adev, sizeof(acx_template_beacon_t), ACX1xx_CMD_CONFIG_BEACON ++ ); ++} ++ ++static inline int ++acx_s_init_max_tim_template(acx_device_t *adev) ++{ ++ return acx_s_init_max_template_generic( ++ adev, sizeof(acx_template_tim_t), ACX1xx_CMD_CONFIG_TIM ++ ); ++} ++ ++static inline int ++acx_s_init_max_probe_response_template(acx_device_t *adev) ++{ ++ return acx_s_init_max_template_generic( ++ adev, sizeof(acx_template_proberesp_t), ACX1xx_CMD_CONFIG_PROBE_RESPONSE ++ ); ++} ++ ++static inline int ++acx_s_init_max_probe_request_template(acx_device_t *adev) ++{ ++ return acx_s_init_max_template_generic( ++ adev, sizeof(acx_template_probereq_t), ACX1xx_CMD_CONFIG_PROBE_REQUEST ++ ); ++} ++ ++/*********************************************************************** ++** acx_s_set_tim_template ++** ++** FIXME: In full blown driver we will regularly update partial virtual bitmap ++** by calling this function ++** (it can be done by irq handler on each DTIM irq or by timer...) ++ ++[802.11 7.3.2.6] TIM information element: ++- 1 EID ++- 1 Length ++1 1 DTIM Count ++ indicates how many beacons (including this) appear before next DTIM ++ (0=this one is a DTIM) ++2 1 DTIM Period ++ number of beacons between successive DTIMs ++ (0=reserved, 1=all TIMs are DTIMs, 2=every other, etc) ++3 1 Bitmap Control ++ bit0: Traffic Indicator bit associated with Assoc ID 0 (Bcast AID?) ++ set to 1 in TIM elements with a value of 0 in the DTIM Count field ++ when one or more broadcast or multicast frames are buffered at the AP. ++ bit1-7: Bitmap Offset (logically Bitmap_Offset = Bitmap_Control & 0xFE). ++4 n Partial Virtual Bitmap ++ Visible part of traffic-indication bitmap. ++ Full bitmap consists of 2008 bits (251 octets) such that bit number N ++ (0<=N<=2007) in the bitmap corresponds to bit number (N mod 8) ++ in octet number N/8 where the low-order bit of each octet is bit0, ++ and the high order bit is bit7. ++ Each set bit in virtual bitmap corresponds to traffic buffered by AP ++ for a specific station (with corresponding AID?). ++ Partial Virtual Bitmap shows a part of bitmap which has non-zero. ++ Bitmap Offset is a number of skipped zero octets (see above). ++ 'Missing' octets at the tail are also assumed to be zero. ++ Example: Length=6, Bitmap_Offset=2, Partial_Virtual_Bitmap=55 55 55 ++ This means that traffic-indication bitmap is: ++ 00000000 00000000 01010101 01010101 01010101 00000000 00000000... ++ (is bit0 in the map is always 0 and real value is in Bitmap Control bit0?) ++*/ ++static int ++acx_s_set_tim_template(acx_device_t *adev) ++{ ++/* For now, configure smallish test bitmap, all zero ("no pending data") */ ++ enum { bitmap_size = 5 }; ++ ++ acx_template_tim_t t; ++ int result; ++ ++ FN_ENTER; ++ ++ memset(&t, 0, sizeof(t)); ++ t.size = 5 + bitmap_size; /* eid+len+count+period+bmap_ctrl + bmap */ ++ t.tim_eid = WLAN_EID_TIM; ++ t.len = 3 + bitmap_size; /* count+period+bmap_ctrl + bmap */ ++ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_TIM, &t, sizeof(t)); ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_fill_beacon_or_proberesp_template ++** ++** For frame format info, please see 802.11-1999.pdf item 7.2.3.9 and below!! ++** ++** NB: we use the fact that ++** struct acx_template_proberesp and struct acx_template_beacon are the same ++** (well, almost...) ++** ++** [802.11] Beacon's body consist of these IEs: ++** 1 Timestamp ++** 2 Beacon interval ++** 3 Capability information ++** 4 SSID ++** 5 Supported rates (up to 8 rates) ++** 6 FH Parameter Set (frequency-hopping PHYs only) ++** 7 DS Parameter Set (direct sequence PHYs only) ++** 8 CF Parameter Set (only if PCF is supported) ++** 9 IBSS Parameter Set (ad-hoc only) ++** ++** Beacon only: ++** 10 TIM (AP only) (see 802.11 7.3.2.6) ++** 11 Country Information (802.11d) ++** 12 FH Parameters (802.11d) ++** 13 FH Pattern Table (802.11d) ++** ... (?!! did not yet find relevant PDF file... --vda) ++** 19 ERP Information (extended rate PHYs) ++** 20 Extended Supported Rates (if more than 8 rates) ++** ++** Proberesp only: ++** 10 Country information (802.11d) ++** 11 FH Parameters (802.11d) ++** 12 FH Pattern Table (802.11d) ++** 13-n Requested information elements (802.11d) ++** ???? ++** 18 ERP Information (extended rate PHYs) ++** 19 Extended Supported Rates (if more than 8 rates) ++*/ ++static int ++acx_fill_beacon_or_proberesp_template(acx_device_t *adev, ++ struct acx_template_beacon *templ, ++ u16 fc /* in host order! */) ++{ ++ int len; ++ u8 *p; ++ ++ FN_ENTER; ++ ++ memset(templ, 0, sizeof(*templ)); ++ MAC_BCAST(templ->da); ++ MAC_COPY(templ->sa, adev->dev_addr); ++ MAC_COPY(templ->bssid, adev->bssid); ++ ++ templ->beacon_interval = cpu_to_le16(adev->beacon_interval); ++ acx_update_capabilities(adev); ++ templ->cap = cpu_to_le16(adev->capabilities); ++ ++ p = templ->variable; ++ p = wlan_fill_ie_ssid(p, adev->essid_len, adev->essid); ++ p = wlan_fill_ie_rates(p, adev->rate_supported_len, adev->rate_supported); ++ p = wlan_fill_ie_ds_parms(p, adev->channel); ++ /* NB: should go AFTER tim, but acx seem to keep tim last always */ ++ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, adev->rate_supported); ++ ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ /* ATIM window */ ++ p = wlan_fill_ie_ibss_parms(p, 0); break; ++ case ACX_MODE_3_AP: ++ /* TIM IE is set up as separate template */ ++ break; ++ } ++ ++ len = p - (u8*)templ; ++ templ->fc = cpu_to_le16(WF_FTYPE_MGMT | fc); ++ /* - 2: do not count 'u16 size' field */ ++ templ->size = cpu_to_le16(len - 2); ++ ++ FN_EXIT1(len); ++ return len; ++} ++ ++ ++#if POWER_SAVE_80211 ++/*********************************************************************** ++** acx_s_set_null_data_template ++*/ ++static int ++acx_s_set_null_data_template(acx_device_t *adev) ++{ ++ struct acx_template_nullframe b; ++ int result; ++ ++ FN_ENTER; ++ ++ /* memset(&b, 0, sizeof(b)); not needed, setting all members */ ++ ++ b.size = cpu_to_le16(sizeof(b) - 2); ++ b.hdr.fc = WF_FTYPE_MGMTi | WF_FSTYPE_NULLi; ++ b.hdr.dur = 0; ++ MAC_BCAST(b.hdr.a1); ++ MAC_COPY(b.hdr.a2, adev->dev_addr); ++ MAC_COPY(b.hdr.a3, adev->bssid); ++ b.hdr.seq = 0; ++ ++ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_NULL_DATA, &b, sizeof(b)); ++ ++ FN_EXIT1(result); ++ return result; ++} ++#endif ++ ++ ++/*********************************************************************** ++** acx_s_set_beacon_template ++*/ ++static int ++acx_s_set_beacon_template(acx_device_t *adev) ++{ ++ struct acx_template_beacon bcn; ++ int len, result; ++ ++ FN_ENTER; ++ ++ len = acx_fill_beacon_or_proberesp_template(adev, &bcn, WF_FSTYPE_BEACON); ++ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_BEACON, &bcn, len); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_s_set_probe_response_template ++*/ ++static int ++acx_s_set_probe_response_template(acx_device_t *adev) ++{ ++ struct acx_template_proberesp pr; ++ int len, result; ++ ++ FN_ENTER; ++ ++ len = acx_fill_beacon_or_proberesp_template(adev, &pr, WF_FSTYPE_PROBERESP); ++ result = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_PROBE_RESPONSE, &pr, len); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_s_init_packet_templates() ++** ++** NOTE: order is very important here, to have a correct memory layout! ++** init templates: max Probe Request (station mode), max NULL data, ++** max Beacon, max TIM, max Probe Response. ++*/ ++static int ++acx_s_init_packet_templates(acx_device_t *adev) ++{ ++ acx_ie_memmap_t mm; /* ACX100 only */ ++ int result = NOT_OK; ++ ++ FN_ENTER; ++ ++ log(L_DEBUG|L_INIT, "initializing max packet templates\n"); ++ ++ if (OK != acx_s_init_max_probe_request_template(adev)) ++ goto failed; ++ ++ if (OK != acx_s_init_max_null_data_template(adev)) ++ goto failed; ++ ++ if (OK != acx_s_init_max_beacon_template(adev)) ++ goto failed; ++ ++ if (OK != acx_s_init_max_tim_template(adev)) ++ goto failed; ++ ++ if (OK != acx_s_init_max_probe_response_template(adev)) ++ goto failed; ++ ++ if (IS_ACX111(adev)) { ++ /* ACX111 doesn't need the memory map magic below, ++ * and the other templates will be set later (acx_start) */ ++ result = OK; ++ goto success; ++ } ++ ++ /* ACX100 will have its TIM template set, ++ * and we also need to update the memory map */ ++ ++ if (OK != acx_s_set_tim_template(adev)) ++ goto failed_acx100; ++ ++ log(L_DEBUG, "sizeof(memmap)=%d bytes\n", (int)sizeof(mm)); ++ ++ if (OK != acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP)) ++ goto failed_acx100; ++ ++ mm.QueueStart = cpu_to_le32(le32_to_cpu(mm.PacketTemplateEnd) + 4); ++ if (OK != acx_s_configure(adev, &mm, ACX1xx_IE_MEMORY_MAP)) ++ goto failed_acx100; ++ ++ result = OK; ++ goto success; ++ ++failed_acx100: ++ log(L_DEBUG|L_INIT, ++ /* "cb=0x%X\n" */ ++ "ACXMemoryMap:\n" ++ ".CodeStart=0x%X\n" ++ ".CodeEnd=0x%X\n" ++ ".WEPCacheStart=0x%X\n" ++ ".WEPCacheEnd=0x%X\n" ++ ".PacketTemplateStart=0x%X\n" ++ ".PacketTemplateEnd=0x%X\n", ++ /* len, */ ++ le32_to_cpu(mm.CodeStart), ++ le32_to_cpu(mm.CodeEnd), ++ le32_to_cpu(mm.WEPCacheStart), ++ le32_to_cpu(mm.WEPCacheEnd), ++ le32_to_cpu(mm.PacketTemplateStart), ++ le32_to_cpu(mm.PacketTemplateEnd)); ++ ++failed: ++ printk("%s: %s() FAILED\n", adev->ndev->name, __func__); ++ ++success: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_s_set_probe_request_template(acx_device_t *adev) ++{ ++ struct acx_template_probereq probereq; ++ char *p; ++ int res; ++ int frame_len; ++ ++ FN_ENTER; ++ ++ memset(&probereq, 0, sizeof(probereq)); ++ ++ probereq.fc = WF_FTYPE_MGMTi | WF_FSTYPE_PROBEREQi; ++ MAC_BCAST(probereq.da); ++ MAC_COPY(probereq.sa, adev->dev_addr); ++ MAC_BCAST(probereq.bssid); ++ ++ p = probereq.variable; ++ p = wlan_fill_ie_ssid(p, adev->essid_len, adev->essid); ++ p = wlan_fill_ie_rates(p, adev->rate_supported_len, adev->rate_supported); ++ p = wlan_fill_ie_rates_ext(p, adev->rate_supported_len, adev->rate_supported); ++ frame_len = p - (char*)&probereq; ++ probereq.size = cpu_to_le16(frame_len - 2); ++ ++ res = acx_s_issue_cmd(adev, ACX1xx_CMD_CONFIG_PROBE_REQUEST, &probereq, frame_len); ++ FN_EXIT0; ++ return res; ++} ++ ++ ++/*********************************************************************** ++** acx_s_init_mac ++*/ ++int ++acx_s_init_mac(acx_device_t *adev) ++{ ++ int result = NOT_OK; ++ ++ FN_ENTER; ++ ++ if (IS_ACX111(adev)) { ++ adev->ie_len = acx111_ie_len; ++ adev->ie_len_dot11 = acx111_ie_len_dot11; ++ } else { ++ adev->ie_len = acx100_ie_len; ++ adev->ie_len_dot11 = acx100_ie_len_dot11; ++ } ++ ++#if defined (ACX_MEM) ++ adev->memblocksize = 256; /* 256 is default */ ++ /* try to load radio for both ACX100 and ACX111, since both ++ * chips have at least some firmware versions making use of an ++ * external radio module */ ++ acxmem_s_upload_radio(adev); ++#else ++ if (IS_PCI(adev)) { ++ adev->memblocksize = 256; /* 256 is default */ ++ /* try to load radio for both ACX100 and ACX111, since both ++ * chips have at least some firmware versions making use of an ++ * external radio module */ ++ acxpci_s_upload_radio(adev); ++ } else { ++ adev->memblocksize = 128; ++ } ++#endif ++ ++ if (IS_ACX111(adev)) { ++ /* for ACX111, the order is different from ACX100 ++ 1. init packet templates ++ 2. create station context and create dma regions ++ 3. init wep default keys ++ */ ++ if (OK != acx_s_init_packet_templates(adev)) ++ goto fail; ++ if (OK != acx111_s_create_dma_regions(adev)) { ++ printk("%s: acx111_create_dma_regions FAILED\n", ++ adev->ndev->name); ++ goto fail; ++ } ++ } else { ++ if (OK != acx100_s_init_wep(adev)) ++ goto fail; ++ if (OK != acx_s_init_packet_templates(adev)) ++ goto fail; ++ if (OK != acx100_s_create_dma_regions(adev)) { ++ printk("%s: acx100_create_dma_regions FAILED\n", ++ adev->ndev->name); ++ goto fail; ++ } ++ } ++ ++ MAC_COPY(adev->ndev->dev_addr, adev->dev_addr); ++ result = OK; ++ ++fail: ++ if (result) ++ printk("acx: init_mac() FAILED\n"); ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++void ++acx_s_set_sane_reg_domain(acx_device_t *adev, int do_set) ++{ ++ unsigned mask; ++ ++ unsigned int i; ++ ++ for (i = 0; i < sizeof(acx_reg_domain_ids); i++) ++ if (acx_reg_domain_ids[i] == adev->reg_dom_id) ++ break; ++ ++ if (sizeof(acx_reg_domain_ids) == i) { ++ log(L_INIT, "Invalid or unsupported regulatory domain" ++ " 0x%02X specified, falling back to FCC (USA)!" ++ " Please report if this sounds fishy!\n", ++ adev->reg_dom_id); ++ i = 0; ++ adev->reg_dom_id = acx_reg_domain_ids[i]; ++ ++ /* since there was a mismatch, we need to force updating */ ++ do_set = 1; ++ } ++ ++ if (do_set) { ++ acx_ie_generic_t dom; ++ dom.m.bytes[0] = adev->reg_dom_id; ++ acx_s_configure(adev, &dom, ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN); ++ } ++ ++ adev->reg_dom_chanmask = reg_domain_channel_masks[i]; ++ ++ mask = (1 << (adev->channel - 1)); ++ if (!(adev->reg_dom_chanmask & mask)) { ++ /* hmm, need to adjust our channel to reside within domain */ ++ mask = 1; ++ for (i = 1; i <= 14; i++) { ++ if (adev->reg_dom_chanmask & mask) { ++ printk("%s: adjusting selected channel from %d " ++ "to %d due to new regulatory domain\n", ++ adev->ndev->name, adev->channel, i); ++ adev->channel = i; ++ break; ++ } ++ mask <<= 1; ++ } ++ } ++} ++ ++ ++#if POWER_SAVE_80211 ++static void ++acx_s_update_80211_powersave_mode(acx_device_t *adev) ++{ ++ /* merge both structs in a union to be able to have common code */ ++ union { ++ acx111_ie_powersave_t acx111; ++ acx100_ie_powersave_t acx100; ++ } pm; ++ ++ /* change 802.11 power save mode settings */ ++ log(L_INIT, "updating 802.11 power save mode settings: " ++ "wakeup_cfg 0x%02X, listen interval %u, " ++ "options 0x%02X, hangover period %u, " ++ "enhanced_ps_transition_time %u\n", ++ adev->ps_wakeup_cfg, adev->ps_listen_interval, ++ adev->ps_options, adev->ps_hangover_period, ++ adev->ps_enhanced_transition_time); ++ acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT); ++ log(L_INIT, "Previous PS mode settings: wakeup_cfg 0x%02X, " ++ "listen interval %u, options 0x%02X, " ++ "hangover period %u, " ++ "enhanced_ps_transition_time %u, beacon_rx_time %u\n", ++ pm.acx111.wakeup_cfg, ++ pm.acx111.listen_interval, ++ pm.acx111.options, ++ pm.acx111.hangover_period, ++ IS_ACX111(adev) ? ++ pm.acx111.enhanced_ps_transition_time ++ : pm.acx100.enhanced_ps_transition_time, ++ IS_ACX111(adev) ? ++ pm.acx111.beacon_rx_time ++ : (u32)-1 ++ ); ++ pm.acx111.wakeup_cfg = adev->ps_wakeup_cfg; ++ pm.acx111.listen_interval = adev->ps_listen_interval; ++ pm.acx111.options = adev->ps_options; ++ pm.acx111.hangover_period = adev->ps_hangover_period; ++ if (IS_ACX111(adev)) { ++ pm.acx111.beacon_rx_time = cpu_to_le32(adev->ps_beacon_rx_time); ++ pm.acx111.enhanced_ps_transition_time = cpu_to_le32(adev->ps_enhanced_transition_time); ++ } else { ++ pm.acx100.enhanced_ps_transition_time = cpu_to_le16(adev->ps_enhanced_transition_time); ++ } ++ acx_s_configure(adev, &pm, ACX1xx_IE_POWER_MGMT); ++ acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT); ++ log(L_INIT, "wakeup_cfg: 0x%02X\n", pm.acx111.wakeup_cfg); ++ acx_s_msleep(40); ++ acx_s_interrogate(adev, &pm, ACX1xx_IE_POWER_MGMT); ++ log(L_INIT, "wakeup_cfg: 0x%02X\n", pm.acx111.wakeup_cfg); ++ log(L_INIT, "power save mode change %s\n", ++ (pm.acx111.wakeup_cfg & PS_CFG_PENDING) ? "FAILED" : "was successful"); ++ /* FIXME: maybe verify via PS_CFG_PENDING bit here ++ * that power save mode change was successful. */ ++ /* FIXME: we shouldn't trigger a scan immediately after ++ * fiddling with power save mode (since the firmware is sending ++ * a NULL frame then). */ ++} ++#endif ++ ++ ++/*********************************************************************** ++** acx_s_update_card_settings ++** ++** Applies accumulated changes in various adev->xxxx members ++** Called by ioctl commit handler, acx_start, acx_set_defaults, ++** acx_s_after_interrupt_task (if IRQ_CMD_UPDATE_CARD_CFG), ++*/ ++static void ++acx111_s_sens_radio_16_17(acx_device_t *adev) ++{ ++ u32 feature1, feature2; ++ ++ if ((adev->sensitivity < 1) || (adev->sensitivity > 3)) { ++ printk("%s: invalid sensitivity setting (1..3), " ++ "setting to 1\n", adev->ndev->name); ++ adev->sensitivity = 1; ++ } ++ acx111_s_get_feature_config(adev, &feature1, &feature2); ++ CLEAR_BIT(feature1, FEATURE1_LOW_RX|FEATURE1_EXTRA_LOW_RX); ++ if (adev->sensitivity > 1) ++ SET_BIT(feature1, FEATURE1_LOW_RX); ++ if (adev->sensitivity > 2) ++ SET_BIT(feature1, FEATURE1_EXTRA_LOW_RX); ++ acx111_s_feature_set(adev, feature1, feature2); ++} ++ ++ ++void ++acx_s_update_card_settings(acx_device_t *adev) ++{ ++ unsigned long flags; ++ unsigned int start_scan = 0; ++ int i; ++ ++ FN_ENTER; ++ ++ log(L_INIT, "get_mask 0x%08X, set_mask 0x%08X\n", ++ adev->get_mask, adev->set_mask); ++ ++ /* Track dependencies betweed various settings */ ++ ++ if (adev->set_mask & (GETSET_MODE|GETSET_RESCAN|GETSET_WEP)) { ++ log(L_INIT, "important setting has been changed. " ++ "Need to update packet templates, too\n"); ++ SET_BIT(adev->set_mask, SET_TEMPLATES); ++ } ++ if (adev->set_mask & GETSET_CHANNEL) { ++ /* This will actually tune RX/TX to the channel */ ++ SET_BIT(adev->set_mask, GETSET_RX|GETSET_TX); ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_3_AP: ++ /* Beacons contain channel# - update them */ ++ SET_BIT(adev->set_mask, SET_TEMPLATES); ++ } ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_2_STA: ++ start_scan = 1; ++ } ++ } ++ ++ /* Apply settings */ ++ ++#ifdef WHY_SHOULD_WE_BOTHER /* imagine we were just powered off */ ++ /* send a disassoc request in case it's required */ ++ if (adev->set_mask & (GETSET_MODE|GETSET_RESCAN|GETSET_CHANNEL|GETSET_WEP)) { ++ if (ACX_MODE_2_STA == adev->mode) { ++ if (ACX_STATUS_4_ASSOCIATED == adev->status) { ++ log(L_ASSOC, "we were ASSOCIATED - " ++ "sending disassoc request\n"); ++ acx_lock(adev, flags); ++ acx_l_transmit_disassoc(adev, NULL); ++ /* FIXME: deauth? */ ++ acx_unlock(adev, flags); ++ } ++ /* need to reset some other stuff as well */ ++ log(L_DEBUG, "resetting bssid\n"); ++ MAC_ZERO(adev->bssid); ++ SET_BIT(adev->set_mask, SET_TEMPLATES|SET_STA_LIST); ++ start_scan = 1; ++ } ++ } ++#endif ++ ++ if (adev->get_mask & GETSET_STATION_ID) { ++ u8 stationID[4 + ACX1xx_IE_DOT11_STATION_ID_LEN]; ++ const u8 *paddr; ++ ++ acx_s_interrogate(adev, &stationID, ACX1xx_IE_DOT11_STATION_ID); ++ paddr = &stationID[4]; ++ for (i = 0; i < ETH_ALEN; i++) { ++ /* we copy the MAC address (reversed in ++ * the card) to the netdevice's MAC ++ * address, and on ifup it will be ++ * copied into iwadev->dev_addr */ ++ adev->ndev->dev_addr[ETH_ALEN - 1 - i] = paddr[i]; ++ } ++ CLEAR_BIT(adev->get_mask, GETSET_STATION_ID); ++ } ++ ++ if (adev->get_mask & GETSET_SENSITIVITY) { ++ if ((RADIO_RFMD_11 == adev->radio_type) ++ || (RADIO_MAXIM_0D == adev->radio_type) ++ || (RADIO_RALINK_15 == adev->radio_type)) { ++ acx_s_read_phy_reg(adev, 0x30, &adev->sensitivity); ++ } else { ++ log(L_INIT, "don't know how to get sensitivity " ++ "for radio type 0x%02X\n", adev->radio_type); ++ adev->sensitivity = 0; ++ } ++ log(L_INIT, "got sensitivity value %u\n", adev->sensitivity); ++ ++ CLEAR_BIT(adev->get_mask, GETSET_SENSITIVITY); ++ } ++ ++ if (adev->get_mask & GETSET_ANTENNA) { ++ u8 antenna[4 + ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN]; ++ ++ memset(antenna, 0, sizeof(antenna)); ++ acx_s_interrogate(adev, antenna, ACX1xx_IE_DOT11_CURRENT_ANTENNA); ++ adev->antenna = antenna[4]; ++ log(L_INIT, "got antenna value 0x%02X\n", adev->antenna); ++ CLEAR_BIT(adev->get_mask, GETSET_ANTENNA); ++ } ++ ++ if (adev->get_mask & GETSET_ED_THRESH) { ++ if (IS_ACX100(adev)) { ++ u8 ed_threshold[4 + ACX100_IE_DOT11_ED_THRESHOLD_LEN]; ++ ++ memset(ed_threshold, 0, sizeof(ed_threshold)); ++ acx_s_interrogate(adev, ed_threshold, ACX100_IE_DOT11_ED_THRESHOLD); ++ adev->ed_threshold = ed_threshold[4]; ++ } else { ++ log(L_INIT, "acx111 doesn't support ED\n"); ++ adev->ed_threshold = 0; ++ } ++ log(L_INIT, "got Energy Detect (ED) threshold %u\n", adev->ed_threshold); ++ CLEAR_BIT(adev->get_mask, GETSET_ED_THRESH); ++ } ++ ++ if (adev->get_mask & GETSET_CCA) { ++ if (IS_ACX100(adev)) { ++ u8 cca[4 + ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN]; ++ ++ memset(cca, 0, sizeof(adev->cca)); ++ acx_s_interrogate(adev, cca, ACX1xx_IE_DOT11_CURRENT_CCA_MODE); ++ adev->cca = cca[4]; ++ } else { ++ log(L_INIT, "acx111 doesn't support CCA\n"); ++ adev->cca = 0; ++ } ++ log(L_INIT, "got Channel Clear Assessment (CCA) value %u\n", adev->cca); ++ CLEAR_BIT(adev->get_mask, GETSET_CCA); ++ } ++ ++ if (adev->get_mask & GETSET_REG_DOMAIN) { ++ acx_ie_generic_t dom; ++ ++ acx_s_interrogate(adev, &dom, ACX1xx_IE_DOT11_CURRENT_REG_DOMAIN); ++ adev->reg_dom_id = dom.m.bytes[0]; ++ acx_s_set_sane_reg_domain(adev, 0); ++ log(L_INIT, "got regulatory domain 0x%02X\n", adev->reg_dom_id); ++ CLEAR_BIT(adev->get_mask, GETSET_REG_DOMAIN); ++ } ++ ++ if (adev->set_mask & GETSET_STATION_ID) { ++ u8 stationID[4 + ACX1xx_IE_DOT11_STATION_ID_LEN]; ++ u8 *paddr; ++ ++ paddr = &stationID[4]; ++ memcpy(adev->dev_addr, adev->ndev->dev_addr, ETH_ALEN); ++ for (i = 0; i < ETH_ALEN; i++) { ++ /* copy the MAC address we obtained when we noticed ++ * that the ethernet iface's MAC changed ++ * to the card (reversed in ++ * the card!) */ ++ paddr[i] = adev->dev_addr[ETH_ALEN - 1 - i]; ++ } ++ acx_s_configure(adev, &stationID, ACX1xx_IE_DOT11_STATION_ID); ++ CLEAR_BIT(adev->set_mask, GETSET_STATION_ID); ++ } ++ ++ if (adev->set_mask & SET_TEMPLATES) { ++ log(L_INIT, "updating packet templates\n"); ++ switch (adev->mode) { ++ case ACX_MODE_2_STA: ++ acx_s_set_probe_request_template(adev); ++#if POWER_SAVE_80211 ++ acx_s_set_null_data_template(adev); ++#endif ++ break; ++ case ACX_MODE_0_ADHOC: ++ acx_s_set_probe_request_template(adev); ++#if POWER_SAVE_80211 ++ /* maybe power save functionality is somehow possible ++ * for Ad-Hoc mode, too... FIXME: verify it somehow? firmware debug fields? */ ++ acx_s_set_null_data_template(adev); ++#endif ++ /* fall through */ ++ case ACX_MODE_3_AP: ++ acx_s_set_beacon_template(adev); ++ acx_s_set_tim_template(adev); ++ /* BTW acx111 firmware would not send probe responses ++ ** if probe request does not have all basic rates flagged ++ ** by 0x80! Thus firmware does not conform to 802.11, ++ ** it should ignore 0x80 bit in ratevector from STA. ++ ** We can 'fix' it by not using this template and ++ ** sending probe responses by hand. TODO --vda */ ++ acx_s_set_probe_response_template(adev); ++ } ++ /* Needed if generated frames are to be emitted at different tx rate now */ ++ log(L_IRQ, "redoing cmd_join_bssid() after template cfg\n"); ++ acx_s_cmd_join_bssid(adev, adev->bssid); ++ CLEAR_BIT(adev->set_mask, SET_TEMPLATES); ++ } ++ if (adev->set_mask & SET_STA_LIST) { ++ acx_lock(adev, flags); ++ acx_l_sta_list_init(adev); ++ CLEAR_BIT(adev->set_mask, SET_STA_LIST); ++ acx_unlock(adev, flags); ++ } ++ if (adev->set_mask & SET_RATE_FALLBACK) { ++ u8 rate[4 + ACX1xx_IE_RATE_FALLBACK_LEN]; ++ ++ /* configure to not do fallbacks when not in auto rate mode */ ++ rate[4] = (adev->rate_auto) ? /* adev->txrate_fallback_retries */ 1 : 0; ++ log(L_INIT, "updating Tx fallback to %u retries\n", rate[4]); ++ acx_s_configure(adev, &rate, ACX1xx_IE_RATE_FALLBACK); ++ CLEAR_BIT(adev->set_mask, SET_RATE_FALLBACK); ++ } ++ if (adev->set_mask & GETSET_TXPOWER) { ++ log(L_INIT, "updating transmit power: %u dBm\n", ++ adev->tx_level_dbm); ++ acx_s_set_tx_level(adev, adev->tx_level_dbm); ++ CLEAR_BIT(adev->set_mask, GETSET_TXPOWER); ++ } ++ ++ if (adev->set_mask & GETSET_SENSITIVITY) { ++ log(L_INIT, "updating sensitivity value: %u\n", ++ adev->sensitivity); ++ switch (adev->radio_type) { ++ case RADIO_RFMD_11: ++ case RADIO_MAXIM_0D: ++ case RADIO_RALINK_15: ++ acx_s_write_phy_reg(adev, 0x30, adev->sensitivity); ++ break; ++ case RADIO_RADIA_16: ++ case RADIO_UNKNOWN_17: ++ acx111_s_sens_radio_16_17(adev); ++ break; ++ default: ++ log(L_INIT, "don't know how to modify sensitivity " ++ "for radio type 0x%02X\n", adev->radio_type); ++ } ++ CLEAR_BIT(adev->set_mask, GETSET_SENSITIVITY); ++ } ++ ++ if (adev->set_mask & GETSET_ANTENNA) { ++ /* antenna */ ++ u8 antenna[4 + ACX1xx_IE_DOT11_CURRENT_ANTENNA_LEN]; ++ ++ memset(antenna, 0, sizeof(antenna)); ++ antenna[4] = adev->antenna; ++ log(L_INIT, "updating antenna value: 0x%02X\n", ++ adev->antenna); ++ acx_s_configure(adev, &antenna, ACX1xx_IE_DOT11_CURRENT_ANTENNA); ++ CLEAR_BIT(adev->set_mask, GETSET_ANTENNA); ++ } ++ ++ if (adev->set_mask & GETSET_ED_THRESH) { ++ /* ed_threshold */ ++ log(L_INIT, "updating Energy Detect (ED) threshold: %u\n", ++ adev->ed_threshold); ++ if (IS_ACX100(adev)) { ++ u8 ed_threshold[4 + ACX100_IE_DOT11_ED_THRESHOLD_LEN]; ++ ++ memset(ed_threshold, 0, sizeof(ed_threshold)); ++ ed_threshold[4] = adev->ed_threshold; ++ acx_s_configure(adev, &ed_threshold, ACX100_IE_DOT11_ED_THRESHOLD); ++ } ++ else ++ log(L_INIT, "acx111 doesn't support ED!\n"); ++ CLEAR_BIT(adev->set_mask, GETSET_ED_THRESH); ++ } ++ ++ if (adev->set_mask & GETSET_CCA) { ++ /* CCA value */ ++ log(L_INIT, "updating Channel Clear Assessment " ++ "(CCA) value: 0x%02X\n", adev->cca); ++ if (IS_ACX100(adev)) { ++ u8 cca[4 + ACX1xx_IE_DOT11_CURRENT_CCA_MODE_LEN]; ++ ++ memset(cca, 0, sizeof(cca)); ++ cca[4] = adev->cca; ++ acx_s_configure(adev, &cca, ACX1xx_IE_DOT11_CURRENT_CCA_MODE); ++ } ++ else ++ log(L_INIT, "acx111 doesn't support CCA!\n"); ++ CLEAR_BIT(adev->set_mask, GETSET_CCA); ++ } ++ ++ if (adev->set_mask & GETSET_LED_POWER) { ++ /* Enable Tx */ ++ log(L_INIT, "updating power LED status: %u\n", adev->led_power); ++ ++ acx_lock(adev, flags); ++#if defined (ACX_MEM) ++ acxmem_l_power_led(adev, adev->led_power); ++#else ++ if (IS_PCI(adev)) ++ acxpci_l_power_led(adev, adev->led_power); ++#endif ++ CLEAR_BIT(adev->set_mask, GETSET_LED_POWER); ++ acx_unlock(adev, flags); ++ } ++ ++ if (adev->set_mask & GETSET_POWER_80211) { ++#if POWER_SAVE_80211 ++ acx_s_update_80211_powersave_mode(adev); ++#endif ++ CLEAR_BIT(adev->set_mask, GETSET_POWER_80211); ++ } ++ ++ if (adev->set_mask & GETSET_CHANNEL) { ++ /* channel */ ++ log(L_INIT, "updating channel to: %u\n", adev->channel); ++ CLEAR_BIT(adev->set_mask, GETSET_CHANNEL); ++ } ++ ++ if (adev->set_mask & GETSET_TX) { ++ /* set Tx */ ++ log(L_INIT, "updating: %s Tx\n", ++ adev->tx_disabled ? "disable" : "enable"); ++ if (adev->tx_disabled) ++ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); ++ else ++ acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_TX, &adev->channel, 1); ++ CLEAR_BIT(adev->set_mask, GETSET_TX); ++ } ++ ++ if (adev->set_mask & GETSET_RX) { ++ /* Enable Rx */ ++ log(L_INIT, "updating: enable Rx on channel: %u\n", ++ adev->channel); ++ acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_RX, &adev->channel, 1); ++ CLEAR_BIT(adev->set_mask, GETSET_RX); ++ } ++ ++ if (adev->set_mask & GETSET_RETRY) { ++ u8 short_retry[4 + ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT_LEN]; ++ u8 long_retry[4 + ACX1xx_IE_DOT11_LONG_RETRY_LIMIT_LEN]; ++ ++ log(L_INIT, "updating short retry limit: %u, long retry limit: %u\n", ++ adev->short_retry, adev->long_retry); ++ short_retry[0x4] = adev->short_retry; ++ long_retry[0x4] = adev->long_retry; ++ acx_s_configure(adev, &short_retry, ACX1xx_IE_DOT11_SHORT_RETRY_LIMIT); ++ acx_s_configure(adev, &long_retry, ACX1xx_IE_DOT11_LONG_RETRY_LIMIT); ++ CLEAR_BIT(adev->set_mask, GETSET_RETRY); ++ } ++ ++ if (adev->set_mask & SET_MSDU_LIFETIME) { ++ u8 xmt_msdu_lifetime[4 + ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME_LEN]; ++ ++ log(L_INIT, "updating tx MSDU lifetime: %u\n", ++ adev->msdu_lifetime); ++ *(u32 *)&xmt_msdu_lifetime[4] = cpu_to_le32((u32)adev->msdu_lifetime); ++ acx_s_configure(adev, &xmt_msdu_lifetime, ACX1xx_IE_DOT11_MAX_XMIT_MSDU_LIFETIME); ++ CLEAR_BIT(adev->set_mask, SET_MSDU_LIFETIME); ++ } ++ ++ if (adev->set_mask & GETSET_REG_DOMAIN) { ++ log(L_INIT, "updating regulatory domain: 0x%02X\n", ++ adev->reg_dom_id); ++ acx_s_set_sane_reg_domain(adev, 1); ++ CLEAR_BIT(adev->set_mask, GETSET_REG_DOMAIN); ++ } ++ ++ if (adev->set_mask & GETSET_MODE) { ++ adev->ndev->type = (adev->mode == ACX_MODE_MONITOR) ? ++ adev->monitor_type : ARPHRD_ETHER; ++ ++ switch (adev->mode) { ++ case ACX_MODE_3_AP: ++ ++ acx_lock(adev, flags); ++ acx_l_sta_list_init(adev); ++ adev->aid = 0; ++ adev->ap_client = NULL; ++ MAC_COPY(adev->bssid, adev->dev_addr); ++ /* this basically says "we're connected" */ ++ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); ++ acx_unlock(adev, flags); ++ ++ acx111_s_feature_off(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER); ++ /* start sending beacons */ ++ acx_s_cmd_join_bssid(adev, adev->bssid); ++ break; ++ case ACX_MODE_MONITOR: ++ acx111_s_feature_on(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER); ++ /* this stops beacons */ ++ acx_s_cmd_join_bssid(adev, adev->bssid); ++ /* this basically says "we're connected" */ ++ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); ++ SET_BIT(adev->set_mask, SET_RXCONFIG|SET_WEP_OPTIONS); ++ break; ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_2_STA: ++ acx111_s_feature_off(adev, 0, FEATURE2_NO_TXCRYPT|FEATURE2_SNIFFER); ++ ++ acx_lock(adev, flags); ++ adev->aid = 0; ++ adev->ap_client = NULL; ++ acx_unlock(adev, flags); ++ ++ /* we want to start looking for peer or AP */ ++ start_scan = 1; ++ break; ++ case ACX_MODE_OFF: ++ /* TODO: disable RX/TX, stop any scanning activity etc: */ ++ /* adev->tx_disabled = 1; */ ++ /* SET_BIT(adev->set_mask, GETSET_RX|GETSET_TX); */ ++ ++ /* This stops beacons (invalid macmode...) */ ++ acx_s_cmd_join_bssid(adev, adev->bssid); ++ acx_set_status(adev, ACX_STATUS_0_STOPPED); ++ break; ++ } ++ CLEAR_BIT(adev->set_mask, GETSET_MODE); ++ } ++ ++ if (adev->set_mask & SET_RXCONFIG) { ++ acx_s_initialize_rx_config(adev); ++ CLEAR_BIT(adev->set_mask, SET_RXCONFIG); ++ } ++ ++ if (adev->set_mask & GETSET_RESCAN) { ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_2_STA: ++ start_scan = 1; ++ break; ++ } ++ CLEAR_BIT(adev->set_mask, GETSET_RESCAN); ++ } ++ ++ if (adev->set_mask & GETSET_WEP) { ++ /* encode */ ++ ++ ie_dot11WEPDefaultKeyID_t dkey; ++#ifdef DEBUG_WEP ++ struct { ++ u16 type; ++ u16 len; ++ u8 val; ++ } ACX_PACKED keyindic; ++#endif ++ log(L_INIT, "updating WEP key settings\n"); ++ ++ acx_s_set_wepkey(adev); ++ ++ dkey.KeyID = adev->wep_current_index; ++ log(L_INIT, "setting WEP key %u as default\n", dkey.KeyID); ++ acx_s_configure(adev, &dkey, ACX1xx_IE_DOT11_WEP_DEFAULT_KEY_SET); ++#ifdef DEBUG_WEP ++ keyindic.val = 3; ++ acx_s_configure(adev, &keyindic, ACX111_IE_KEY_CHOOSE); ++#endif ++ start_scan = 1; ++ CLEAR_BIT(adev->set_mask, GETSET_WEP); ++ } ++ ++ if (adev->set_mask & SET_WEP_OPTIONS) { ++ acx100_ie_wep_options_t options; ++ if (IS_ACX111(adev)) { ++ log(L_DEBUG, "setting WEP Options for acx111 is not supported\n"); ++ } else { ++ log(L_INIT, "setting WEP Options\n"); ++ acx100_s_init_wep(adev); ++#if 0 ++ /* let's choose maximum setting: 4 default keys, ++ * plus 10 other keys: */ ++ options.NumKeys = cpu_to_le16(DOT11_MAX_DEFAULT_WEP_KEYS + 10); ++ /* don't decrypt default key only, ++ * don't override decryption: */ ++ options.WEPOption = 0; ++ if (adev->mode == ACX_MODE_MONITOR) { ++ /* don't decrypt default key only, ++ * override decryption mechanism: */ ++ options.WEPOption = 2; ++ } ++ ++ acx_s_configure(adev, &options, ACX100_IE_WEP_OPTIONS); ++#endif ++ } ++ CLEAR_BIT(adev->set_mask, SET_WEP_OPTIONS); ++ } ++ ++ /* Rescan was requested */ ++ if (start_scan) { ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_2_STA: ++ /* We can avoid clearing list if join code ++ ** will be a bit more clever about not picking ++ ** 'bad' AP over and over again */ ++ acx_lock(adev, flags); ++ adev->ap_client = NULL; ++ acx_l_sta_list_init(adev); ++ acx_set_status(adev, ACX_STATUS_1_SCANNING); ++ acx_unlock(adev, flags); ++ ++ acx_s_cmd_start_scan(adev); ++ } ++ } ++ ++ /* debug, rate, and nick don't need any handling */ ++ /* what about sniffing mode?? */ ++ ++ log(L_INIT, "get_mask 0x%08X, set_mask 0x%08X - after update\n", ++ adev->get_mask, adev->set_mask); ++ ++/* end: */ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_e_after_interrupt_task ++*/ ++static int ++acx_s_recalib_radio(acx_device_t *adev) ++{ ++ if (IS_ACX111(adev)) { ++ acx111_cmd_radiocalib_t cal; ++ ++ printk("%s: recalibrating radio\n", adev->ndev->name); ++ /* automatic recalibration, choose all methods: */ ++ cal.methods = cpu_to_le32(0x8000000f); ++ /* automatic recalibration every 60 seconds (value in TUs) ++ * I wonder what the firmware default here is? */ ++ cal.interval = cpu_to_le32(58594); ++ return acx_s_issue_cmd_timeo(adev, ACX111_CMD_RADIOCALIB, ++ &cal, sizeof(cal), CMD_TIMEOUT_MS(100)); ++ } else { ++ /* On ACX100, we need to recalibrate the radio ++ * by issuing a GETSET_TX|GETSET_RX */ ++ if (/* (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0)) && ++ (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0)) && */ ++ (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_TX, &adev->channel, 1)) && ++ (OK == acx_s_issue_cmd(adev, ACX1xx_CMD_ENABLE_RX, &adev->channel, 1)) ) ++ return OK; ++ return NOT_OK; ++ } ++} ++ ++static void ++acx_s_after_interrupt_recalib(acx_device_t *adev) ++{ ++ int res; ++ ++ /* this helps with ACX100 at least; ++ * hopefully ACX111 also does a ++ * recalibration here */ ++ ++ /* clear flag beforehand, since we want to make sure ++ * it's cleared; then only set it again on specific circumstances */ ++ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); ++ ++ /* better wait a bit between recalibrations to ++ * prevent overheating due to torturing the card ++ * into working too long despite high temperature ++ * (just a safety measure) */ ++ if (adev->recalib_time_last_success ++ && time_before(jiffies, adev->recalib_time_last_success ++ + RECALIB_PAUSE * 60 * HZ)) { ++ if (adev->recalib_msg_ratelimit <= 4) { ++ printk("%s: less than " STRING(RECALIB_PAUSE) ++ " minutes since last radio recalibration, " ++ "not recalibrating (maybe card is too hot?)\n", ++ adev->ndev->name); ++ adev->recalib_msg_ratelimit++; ++ if (adev->recalib_msg_ratelimit == 5) ++ printk("disabling above message until next recalib\n"); ++ } ++ return; ++ } ++ ++ adev->recalib_msg_ratelimit = 0; ++ ++ /* note that commands sometimes fail (card busy), ++ * so only clear flag if we were fully successful */ ++ res = acx_s_recalib_radio(adev); ++ if (res == OK) { ++ printk("%s: successfully recalibrated radio\n", ++ adev->ndev->name); ++ adev->recalib_time_last_success = jiffies; ++ adev->recalib_failure_count = 0; ++ } else { ++ /* failed: resubmit, but only limited ++ * amount of times within some time range ++ * to prevent endless loop */ ++ ++ adev->recalib_time_last_success = 0; /* we failed */ ++ ++ /* if some time passed between last ++ * attempts, then reset failure retry counter ++ * to be able to do next recalib attempt */ ++ if (time_after(jiffies, adev->recalib_time_last_attempt + 5*HZ)) ++ adev->recalib_failure_count = 0; ++ ++ if (adev->recalib_failure_count < 5) { ++ /* increment inside only, for speedup of outside path */ ++ adev->recalib_failure_count++; ++ adev->recalib_time_last_attempt = jiffies; ++ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); ++ } ++ } ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) ++static void ++acx_e_after_interrupt_task(struct work_struct *work) ++{ ++ acx_device_t *adev = container_of(work, acx_device_t, after_interrupt_task); ++#else ++ static void ++ acx_e_after_interrupt_task(void *data) ++ { ++ struct net_device *ndev = (struct net_device*)data; ++ acx_device_t *adev = ndev2adev(ndev); ++#endif ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ if (!adev->after_interrupt_jobs) ++ goto end; /* no jobs to do */ ++ ++#if TX_CLEANUP_IN_SOFTIRQ ++ /* can happen only on PCI */ ++ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_TX_CLEANUP) { ++ acx_lock(adev, flags); ++ acxpci_l_clean_txdesc(adev); ++ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_TX_CLEANUP); ++ acx_unlock(adev, flags); ++ } ++#endif ++ /* we see lotsa tx errors */ ++ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_RADIO_RECALIB) { ++ acx_s_after_interrupt_recalib(adev); ++ } ++ ++ /* a poor interrupt code wanted to do update_card_settings() */ ++ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_UPDATE_CARD_CFG) { ++ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) ++ acx_s_update_card_settings(adev); ++ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_UPDATE_CARD_CFG); ++ } ++ ++ /* 1) we detected that no Scan_Complete IRQ came from fw, or ++ ** 2) we found too many STAs */ ++ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_STOP_SCAN) { ++ log(L_IRQ, "sending a stop scan cmd...\n"); ++ acx_s_issue_cmd(adev, ACX1xx_CMD_STOP_SCAN, NULL, 0); ++ /* HACK: set the IRQ bit, since we won't get a ++ * scan complete IRQ any more on ACX111 (works on ACX100!), ++ * since _we_, not a fw, have stopped the scan */ ++ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); ++ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_STOP_SCAN); ++ } ++ ++ /* either fw sent Scan_Complete or we detected that ++ ** no Scan_Complete IRQ came from fw. Finish scanning, ++ ** pick join partner if any */ ++ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_COMPLETE_SCAN) { ++ if (adev->status == ACX_STATUS_1_SCANNING) { ++ if (OK != acx_s_complete_scan(adev)) { ++ SET_BIT(adev->after_interrupt_jobs, ++ ACX_AFTER_IRQ_RESTART_SCAN); ++ } ++ } else { ++ /* + scan kills current join status - restore it ++ ** (do we need it for STA?) */ ++ /* + does it happen only with active scans? ++ ** active and passive scans? ALL scans including ++ ** background one? */ ++ /* + was not verified that everything is restored ++ ** (but at least we start to emit beacons again) */ ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_3_AP: ++ log(L_IRQ, "redoing cmd_join_bssid() after scan\n"); ++ acx_s_cmd_join_bssid(adev, adev->bssid); ++ } ++ } ++ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_COMPLETE_SCAN); ++ } ++ ++ /* STA auth or assoc timed out, start over again */ ++ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_RESTART_SCAN) { ++ log(L_IRQ, "sending a start_scan cmd...\n"); ++ acx_s_cmd_start_scan(adev); ++ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_RESTART_SCAN); ++ } ++ ++ /* whee, we got positive assoc response! 8) */ ++ if (adev->after_interrupt_jobs & ACX_AFTER_IRQ_CMD_ASSOCIATE) { ++ acx_ie_generic_t pdr; ++ /* tiny race window exists, checking that we still a STA */ ++ switch (adev->mode) { ++ case ACX_MODE_2_STA: ++ pdr.m.aid = cpu_to_le16(adev->aid); ++ acx_s_configure(adev, &pdr, ACX1xx_IE_ASSOC_ID); ++ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); ++ log(L_ASSOC|L_DEBUG, "ASSOCIATED!\n"); ++ CLEAR_BIT(adev->after_interrupt_jobs, ACX_AFTER_IRQ_CMD_ASSOCIATE); ++ } ++ } ++end: ++ acx_sem_unlock(adev); ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_schedule_task ++** ++** Schedule the call of the after_interrupt method after leaving ++** the interrupt context. ++*/ ++void ++acx_schedule_task(acx_device_t *adev, unsigned int set_flag) ++{ ++ SET_BIT(adev->after_interrupt_jobs, set_flag); ++ SCHEDULE_WORK(&adev->after_interrupt_task); ++} ++ ++ ++/*********************************************************************** ++*/ ++void ++acx_init_task_scheduler(acx_device_t *adev) ++{ ++ /* configure task scheduler */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) ++ INIT_WORK(&adev->after_interrupt_task, acx_e_after_interrupt_task); ++#else ++ INIT_WORK(&adev->after_interrupt_task, acx_e_after_interrupt_task, ++ adev->ndev); ++#endif ++} ++ ++ ++/*********************************************************************** ++** acx_s_start ++*/ ++void ++acx_s_start(acx_device_t *adev) ++{ ++ FN_ENTER; ++ ++ /* ++ * Ok, now we do everything that can possibly be done with ioctl ++ * calls to make sure that when it was called before the card ++ * was up we get the changes asked for ++ */ ++ ++ SET_BIT(adev->set_mask, SET_TEMPLATES|SET_STA_LIST|GETSET_WEP ++ |GETSET_TXPOWER|GETSET_ANTENNA|GETSET_ED_THRESH|GETSET_CCA ++ |GETSET_REG_DOMAIN|GETSET_MODE|GETSET_CHANNEL ++ |GETSET_TX|GETSET_RX|GETSET_STATION_ID); ++ ++ log(L_INIT, "updating initial settings on iface activation\n"); ++ acx_s_update_card_settings(adev); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acx_update_capabilities ++*/ ++void ++acx_update_capabilities(acx_device_t *adev) ++{ ++ u16 cap = 0; ++ ++ switch (adev->mode) { ++ case ACX_MODE_3_AP: ++ SET_BIT(cap, WF_MGMT_CAP_ESS); break; ++ case ACX_MODE_0_ADHOC: ++ SET_BIT(cap, WF_MGMT_CAP_IBSS); break; ++ /* other types of stations do not emit beacons */ ++ } ++ ++ if (adev->wep_restricted) { ++ SET_BIT(cap, WF_MGMT_CAP_PRIVACY); ++ } ++ if (adev->cfgopt_dot11ShortPreambleOption) { ++ SET_BIT(cap, WF_MGMT_CAP_SHORT); ++ } ++ if (adev->cfgopt_dot11PBCCOption) { ++ SET_BIT(cap, WF_MGMT_CAP_PBCC); ++ } ++ if (adev->cfgopt_dot11ChannelAgility) { ++ SET_BIT(cap, WF_MGMT_CAP_AGILITY); ++ } ++ log(L_DEBUG, "caps updated from 0x%04X to 0x%04X\n", ++ adev->capabilities, cap); ++ adev->capabilities = cap; ++} ++ ++/*********************************************************************** ++** Common function to parse ALL configoption struct formats ++** (ACX100 and ACX111; FIXME: how to make it work with ACX100 USB!?!?). ++** FIXME: logging should be removed here and added to a /proc file instead ++*/ ++void ++acx_s_parse_configoption(acx_device_t *adev, const acx111_ie_configoption_t *pcfg) ++{ ++ const u8 *pEle; ++ int i; ++ int is_acx111 = IS_ACX111(adev); ++ ++ if (acx_debug & L_DEBUG) { ++ printk("configoption struct content:\n"); ++ acx_dump_bytes(pcfg, sizeof(*pcfg)); ++ } ++ ++ if (( is_acx111 && (adev->eeprom_version == 5)) ++ || (!is_acx111 && (adev->eeprom_version == 4)) ++ || (!is_acx111 && (adev->eeprom_version == 5))) { ++ /* these versions are known to be supported */ ++ } else { ++ printk("unknown chip and EEPROM version combination (%s, v%d), " ++ "don't know how to parse config options yet. " ++ "Please report\n", is_acx111 ? "ACX111" : "ACX100", ++ adev->eeprom_version); ++ return; ++ } ++ ++ /* first custom-parse the first part which has chip-specific layout */ ++ ++ pEle = (const u8 *) pcfg; ++ ++ pEle += 4; /* skip (type,len) header */ ++ ++ memcpy(adev->cfgopt_NVSv, pEle, sizeof(adev->cfgopt_NVSv)); ++ pEle += sizeof(adev->cfgopt_NVSv); ++ ++ if (is_acx111) { ++ adev->cfgopt_NVS_vendor_offs = le16_to_cpu(*(u16 *)pEle); ++ pEle += sizeof(adev->cfgopt_NVS_vendor_offs); ++ ++ adev->cfgopt_probe_delay = 200; /* good default value? */ ++ pEle += 2; /* FIXME: unknown, value 0x0001 */ ++ } else { ++ memcpy(adev->cfgopt_MAC, pEle, sizeof(adev->cfgopt_MAC)); ++ pEle += sizeof(adev->cfgopt_MAC); ++ ++ adev->cfgopt_probe_delay = le16_to_cpu(*(u16 *)pEle); ++ pEle += sizeof(adev->cfgopt_probe_delay); ++ if ((adev->cfgopt_probe_delay < 100) || (adev->cfgopt_probe_delay > 500)) { ++ printk("strange probe_delay value %d, " ++ "tweaking to 200\n", adev->cfgopt_probe_delay); ++ adev->cfgopt_probe_delay = 200; ++ } ++ } ++ ++ adev->cfgopt_eof_memory = le32_to_cpu(*(u32 *)pEle); ++ pEle += sizeof(adev->cfgopt_eof_memory); ++ ++ printk("NVS_vendor_offs:%04X probe_delay:%d eof_memory:%d\n", ++ adev->cfgopt_NVS_vendor_offs, ++ adev->cfgopt_probe_delay, ++ adev->cfgopt_eof_memory); ++ ++ adev->cfgopt_dot11CCAModes = *pEle++; ++ adev->cfgopt_dot11Diversity = *pEle++; ++ adev->cfgopt_dot11ShortPreambleOption = *pEle++; ++ adev->cfgopt_dot11PBCCOption = *pEle++; ++ adev->cfgopt_dot11ChannelAgility = *pEle++; ++ adev->cfgopt_dot11PhyType = *pEle++; ++ adev->cfgopt_dot11TempType = *pEle++; ++ printk("CCAModes:%02X Diversity:%02X ShortPreOpt:%02X " ++ "PBCC:%02X ChanAgil:%02X PHY:%02X Temp:%02X\n", ++ adev->cfgopt_dot11CCAModes, ++ adev->cfgopt_dot11Diversity, ++ adev->cfgopt_dot11ShortPreambleOption, ++ adev->cfgopt_dot11PBCCOption, ++ adev->cfgopt_dot11ChannelAgility, ++ adev->cfgopt_dot11PhyType, ++ adev->cfgopt_dot11TempType); ++ ++ /* then use common parsing for next part which has common layout */ ++ ++ pEle++; /* skip table_count (6) */ ++ ++ if (IS_MEM(adev) && IS_ACX100(adev)) ++ { ++ /* ++ * For iPaq hx4700 Generic Slave F/W 1.10.7.K. I'm not sure if these ++ * 4 extra bytes are before the dot11 things above or after, so I'm just ++ * going to guess after. If someone sees these aren't reasonable numbers, ++ * please fix this. ++ * The area from which the dot11 values above are read contains: ++ * 04 01 01 01 00 05 01 06 00 02 01 02 ++ * the 8 dot11 reads above take care of 8 of them, but which 8... ++ */ ++ pEle += 4; ++ } ++ ++ adev->cfgopt_antennas.type = pEle[0]; ++ adev->cfgopt_antennas.len = pEle[1]; ++ printk("AntennaID:%02X Len:%02X Data:", ++ adev->cfgopt_antennas.type, adev->cfgopt_antennas.len); ++ for (i = 0; i < pEle[1]; i++) { ++ adev->cfgopt_antennas.list[i] = pEle[i+2]; ++ printk("%02X ", pEle[i+2]); ++ } ++ printk("\n"); ++ ++ pEle += pEle[1] + 2; ++ adev->cfgopt_power_levels.type = pEle[0]; ++ adev->cfgopt_power_levels.len = pEle[1]; ++ printk("PowerLevelID:%02X Len:%02X Data:", ++ adev->cfgopt_power_levels.type, adev->cfgopt_power_levels.len); ++ for (i = 0; i < pEle[1]; i++) { ++ adev->cfgopt_power_levels.list[i] = le16_to_cpu(*(u16 *)&pEle[i*2+2]); ++ printk("%04X ", adev->cfgopt_power_levels.list[i]); ++ } ++ printk("\n"); ++ ++ pEle += pEle[1]*2 + 2; ++ adev->cfgopt_data_rates.type = pEle[0]; ++ adev->cfgopt_data_rates.len = pEle[1]; ++ printk("DataRatesID:%02X Len:%02X Data:", ++ adev->cfgopt_data_rates.type, adev->cfgopt_data_rates.len); ++ for (i = 0; i < pEle[1]; i++) { ++ adev->cfgopt_data_rates.list[i] = pEle[i+2]; ++ printk("%02X ", pEle[i+2]); ++ } ++ printk("\n"); ++ ++ pEle += pEle[1] + 2; ++ adev->cfgopt_domains.type = pEle[0]; ++ adev->cfgopt_domains.len = pEle[1]; ++ if (IS_MEM(adev) && IS_ACX100(adev)) ++ { ++ /* ++ * For iPaq hx4700 Generic Slave F/W 1.10.7.K. ++ * There's an extra byte between this structure and the next ++ * that is not accounted for with this structure's length. It's ++ * most likely a bug in the firmware, but we can fix it here ++ * by bumping the length of this field by 1. ++ */ ++ adev->cfgopt_domains.len++; ++ } ++ printk("DomainID:%02X Len:%02X Data:", ++ adev->cfgopt_domains.type, adev->cfgopt_domains.len); ++ for (i = 0; i < adev->cfgopt_domains.len; i++) { ++ adev->cfgopt_domains.list[i] = pEle[i+2]; ++ printk("%02X ", pEle[i+2]); ++ } ++ printk("\n"); ++ ++ pEle += adev->cfgopt_domains.len + 2; ++ ++ adev->cfgopt_product_id.type = pEle[0]; ++ adev->cfgopt_product_id.len = pEle[1]; ++ for (i = 0; i < pEle[1]; i++) { ++ adev->cfgopt_product_id.list[i] = pEle[i+2]; ++ } ++ printk("ProductID:%02X Len:%02X Data:%.*s\n", ++ adev->cfgopt_product_id.type, adev->cfgopt_product_id.len, ++ adev->cfgopt_product_id.len, (char *)adev->cfgopt_product_id.list); ++ ++ pEle += pEle[1] + 2; ++ adev->cfgopt_manufacturer.type = pEle[0]; ++ adev->cfgopt_manufacturer.len = pEle[1]; ++ for (i = 0; i < pEle[1]; i++) { ++ adev->cfgopt_manufacturer.list[i] = pEle[i+2]; ++ } ++ printk("ManufacturerID:%02X Len:%02X Data:%.*s\n", ++ adev->cfgopt_manufacturer.type, adev->cfgopt_manufacturer.len, ++ adev->cfgopt_manufacturer.len, (char *)adev->cfgopt_manufacturer.list); ++/* ++ printk("EEPROM part:\n"); ++ for (i=0; i<58; i++) { ++ printk("%02X =======> 0x%02X\n", ++ i, (u8 *)adev->cfgopt_NVSv[i-2]); ++ } ++*/ ++} ++ ++ ++/*********************************************************************** ++*/ ++static int __init ++acx_e_init_module(void) ++{ ++ int r1,r2,r3,r4; ++ ++ acx_struct_size_check(); ++ ++ printk("acx: this driver is still EXPERIMENTAL\n" ++ "acx: reading README file and/or Craig's HOWTO is " ++ "recommended, visit http://acx100.sf.net in case " ++ "of further questions/discussion\n"); ++ ++#if defined(CONFIG_ACX_PCI) ++ r1 = acxpci_e_init_module(); ++#else ++ r1 = -EINVAL; ++#endif ++#if defined(CONFIG_ACX_MEM) ++ r2 = acxmem_e_init_module(); ++#else ++ r2 = -EINVAL; ++#endif ++#if defined(CONFIG_ACX_USB) ++ r3 = acxusb_e_init_module(); ++#else ++ r3 = -EINVAL; ++#endif ++#if defined(CONFIG_ACX_CS) ++ r4 = acx_cs_init(); ++#else ++ r4 = -EINVAL; ++#endif ++ if (r2 && r1 && r3 && r4) { /* all failed! */ ++ if (r3 || r1) ++ return r3 ? r3 : r1; ++ else ++ return r2; ++ } ++ /* return success if at least one succeeded */ ++ return 0; ++ ++} ++ ++static void __exit ++acx_e_cleanup_module(void) ++{ ++#if defined(CONFIG_ACX_PCI) ++ acxpci_e_cleanup_module(); ++#endif ++#if defined(CONFIG_ACX_MEM) ++ acxmem_e_cleanup_module(); ++#endif ++#if defined(CONFIG_ACX_USB) ++ acxusb_e_cleanup_module(); ++#endif ++#if defined(CONFIG_ACX_CS) ++ acx_cs_cleanup(); ++#endif ++} ++ ++module_init(acx_e_init_module) ++module_exit(acx_e_cleanup_module) +Index: linux-2.6.23/drivers/net/wireless/acx/conv.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/conv.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,504 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++ ++#include ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) ++#include ++#endif ++#include ++#include ++#include ++#include ++#include ++ ++#include "acx.h" ++ ++ ++/*********************************************************************** ++** proto_is_stt ++** ++** Searches the 802.1h Selective Translation Table for a given ++** protocol. ++** ++** prottype - protocol number (in host order) to search for. ++** ++** Returns: ++** 1 - if the table is empty or a match is found. ++** 0 - if the table is non-empty and a match is not found. ++** ++** Based largely on p80211conv.c of the linux-wlan-ng project ++*/ ++static inline int ++proto_is_stt(unsigned int proto) ++{ ++ /* Always return found for now. This is the behavior used by the */ ++ /* Zoom Win95 driver when 802.1h mode is selected */ ++ /* TODO: If necessary, add an actual search we'll probably ++ need this to match the CMAC's way of doing things. ++ Need to do some testing to confirm. ++ */ ++ ++ if (proto == 0x80f3) /* APPLETALK */ ++ return 1; ++ ++ return 0; ++/* return ((prottype == ETH_P_AARP) || (prottype == ETH_P_IPX)); */ ++} ++ ++/* Helpers */ ++ ++static inline void ++store_llc_snap(struct wlan_llc *llc) ++{ ++ llc->dsap = 0xaa; /* SNAP, see IEEE 802 */ ++ llc->ssap = 0xaa; ++ llc->ctl = 0x03; ++} ++static inline int ++llc_is_snap(const struct wlan_llc *llc) ++{ ++ return (llc->dsap == 0xaa) ++ && (llc->ssap == 0xaa) ++ && (llc->ctl == 0x03); ++} ++static inline void ++store_oui_rfc1042(struct wlan_snap *snap) ++{ ++ snap->oui[0] = 0; ++ snap->oui[1] = 0; ++ snap->oui[2] = 0; ++} ++static inline int ++oui_is_rfc1042(const struct wlan_snap *snap) ++{ ++ return (snap->oui[0] == 0) ++ && (snap->oui[1] == 0) ++ && (snap->oui[2] == 0); ++} ++static inline void ++store_oui_8021h(struct wlan_snap *snap) ++{ ++ snap->oui[0] = 0; ++ snap->oui[1] = 0; ++ snap->oui[2] = 0xf8; ++} ++static inline int ++oui_is_8021h(const struct wlan_snap *snap) ++{ ++ return (snap->oui[0] == 0) ++ && (snap->oui[1] == 0) ++ && (snap->oui[2] == 0xf8); ++} ++ ++ ++/*********************************************************************** ++** acx_ether_to_txbuf ++** ++** Uses the contents of the ether frame to build the elements of ++** the 802.11 frame. ++** ++** We don't actually set up the frame header here. That's the ++** MAC's job. We're only handling conversion of DIXII or 802.3+LLC ++** frames to something that works with 802.11. ++** ++** Based largely on p80211conv.c of the linux-wlan-ng project ++*/ ++int ++acx_ether_to_txbuf(acx_device_t *adev, void *txbuf, const struct sk_buff *skb) ++{ ++ struct wlan_hdr_a3 *w_hdr; ++ struct wlan_ethhdr *e_hdr; ++ struct wlan_llc *e_llc; ++ struct wlan_snap *e_snap; ++ const u8 *a1, *a3; ++ int header_len, payload_len = -1; ++ /* protocol type or data length, depending on whether ++ * DIX or 802.3 ethernet format */ ++ u16 proto; ++ u16 fc; ++ ++ FN_ENTER; ++ ++ if (unlikely(!skb->len)) { ++ log(L_DEBUG, "zero-length skb!\n"); ++ goto end; ++ } ++ ++ w_hdr = (struct wlan_hdr_a3*)txbuf; ++ ++ switch (adev->mode) { ++ case ACX_MODE_MONITOR: ++ /* NB: one day we might want to play with DESC_CTL2_FCS ++ ** Will need to stop doing "- WLAN_FCS_LEN" here then */ ++ if (unlikely(skb->len >= WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_FCS_LEN)) { ++ printk("%s: can't tx oversized frame (%d bytes)\n", ++ adev->ndev->name, skb->len); ++ goto end; ++ } ++ memcpy(w_hdr, skb->data, skb->len); ++ payload_len = skb->len; ++ goto end; ++ } ++ ++ /* step 1: classify ether frame, DIX or 802.3? */ ++ e_hdr = (wlan_ethhdr_t *)skb->data; ++ proto = ntohs(e_hdr->type); ++ if (proto <= 1500) { ++ log(L_DEBUG, "tx: 802.3 len: %d\n", skb->len); ++ /* codes <= 1500 reserved for 802.3 lengths */ ++ /* it's 802.3, pass ether payload unchanged, */ ++ /* trim off ethernet header and copy payload to txdesc */ ++ header_len = WLAN_HDR_A3_LEN; ++ } else { ++ /* it's DIXII, time for some conversion */ ++ /* Create 802.11 packet. Header also contains llc and snap. */ ++ ++ log(L_DEBUG, "tx: DIXII len: %d\n", skb->len); ++ ++ /* size of header is 802.11 header + llc + snap */ ++ header_len = WLAN_HDR_A3_LEN + sizeof(wlan_llc_t) + sizeof(wlan_snap_t); ++ /* llc is located behind the 802.11 header */ ++ e_llc = (wlan_llc_t*)(w_hdr + 1); ++ /* snap is located behind the llc */ ++ e_snap = (wlan_snap_t*)(e_llc + 1); ++ ++ /* setup the LLC header */ ++ store_llc_snap(e_llc); ++ ++ /* setup the SNAP header */ ++ e_snap->type = htons(proto); ++ if (proto_is_stt(proto)) { ++ store_oui_8021h(e_snap); ++ } else { ++ store_oui_rfc1042(e_snap); ++ } ++ } ++ /* trim off ethernet header and copy payload to txbuf */ ++ payload_len = skb->len - sizeof(wlan_ethhdr_t); ++ /* TODO: can we just let acx DMA payload from skb instead? */ ++ memcpy((u8*)txbuf + header_len, skb->data + sizeof(wlan_ethhdr_t), payload_len); ++ payload_len += header_len; ++ ++ /* Set up the 802.11 header */ ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi); ++ a1 = e_hdr->daddr; ++ a3 = adev->bssid; ++ break; ++ case ACX_MODE_2_STA: ++ fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi | WF_FC_TODSi); ++ a1 = adev->bssid; ++ a3 = e_hdr->daddr; ++ break; ++ case ACX_MODE_3_AP: ++ fc = (WF_FTYPE_DATAi | WF_FSTYPE_DATAONLYi | WF_FC_FROMDSi); ++ a1 = e_hdr->daddr; ++ a3 = e_hdr->saddr; ++ break; ++ default: ++ printk("%s: error - converting eth to wlan in unknown mode\n", ++ adev->ndev->name); ++ payload_len = -1; ++ goto end; ++ } ++ if (adev->wep_enabled) ++ SET_BIT(fc, WF_FC_ISWEPi); ++ ++ w_hdr->fc = fc; ++ w_hdr->dur = 0; ++ MAC_COPY(w_hdr->a1, a1); ++ MAC_COPY(w_hdr->a2, adev->dev_addr); ++ MAC_COPY(w_hdr->a3, a3); ++ w_hdr->seq = 0; ++ ++#ifdef DEBUG_CONVERT ++ if (acx_debug & L_DATA) { ++ printk("original eth frame [%d]: ", skb->len); ++ acx_dump_bytes(skb->data, skb->len); ++ printk("802.11 frame [%d]: ", payload_len); ++ acx_dump_bytes(w_hdr, payload_len); ++ } ++#endif ++ ++end: ++ FN_EXIT1(payload_len); ++ return payload_len; ++} ++ ++ ++/*********************************************************************** ++** acx_rxbuf_to_ether ++** ++** Uses the contents of a received 802.11 frame to build an ether ++** frame. ++** ++** This function extracts the src and dest address from the 802.11 ++** frame to use in the construction of the eth frame. ++** ++** Based largely on p80211conv.c of the linux-wlan-ng project ++*/ ++struct sk_buff* ++acx_rxbuf_to_ether(acx_device_t *adev, rxbuffer_t *rxbuf) ++{ ++ struct wlan_hdr *w_hdr; ++ struct wlan_ethhdr *e_hdr; ++ struct wlan_llc *e_llc; ++ struct wlan_snap *e_snap; ++ struct sk_buff *skb; ++ const u8 *daddr; ++ const u8 *saddr; ++ const u8 *e_payload; ++ int buflen, payload_length; ++ unsigned int payload_offset, mtu; ++ u16 fc; ++ ++ FN_ENTER; ++ ++ /* This looks complex because it must handle possible ++ ** phy header in rxbuff */ ++ w_hdr = acx_get_wlan_hdr(adev, rxbuf); ++ payload_offset = WLAN_HDR_A3_LEN; /* it is relative to w_hdr */ ++ payload_length = RXBUF_BYTES_USED(rxbuf) /* entire rxbuff... */ ++ - ((u8*)w_hdr - (u8*)rxbuf) /* minus space before 802.11 frame */ ++ - WLAN_HDR_A3_LEN; /* minus 802.11 header */ ++ ++ /* setup some vars for convenience */ ++ fc = w_hdr->fc; ++ switch (WF_FC_FROMTODSi & fc) { ++ case 0: ++ daddr = w_hdr->a1; ++ saddr = w_hdr->a2; ++ break; ++ case WF_FC_FROMDSi: ++ daddr = w_hdr->a1; ++ saddr = w_hdr->a3; ++ break; ++ case WF_FC_TODSi: ++ daddr = w_hdr->a3; ++ saddr = w_hdr->a2; ++ break; ++ default: /* WF_FC_FROMTODSi */ ++ payload_offset += (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN); ++ payload_length -= (WLAN_HDR_A4_LEN - WLAN_HDR_A3_LEN); ++ daddr = w_hdr->a3; ++ saddr = w_hdr->a4; ++ } ++ ++ if ((WF_FC_ISWEPi & fc) && IS_ACX100(adev)) { ++ /* chop off the IV+ICV WEP header and footer */ ++ log(L_DATA|L_DEBUG, "rx: WEP packet, " ++ "chopping off IV and ICV\n"); ++ payload_offset += WLAN_WEP_IV_LEN; ++ payload_length -= WLAN_WEP_IV_LEN + WLAN_WEP_ICV_LEN; ++ } ++ ++ if (unlikely(payload_length < 0)) { ++ printk("%s: rx frame too short, ignored\n", adev->ndev->name); ++ goto ret_null; ++ } ++ ++ e_hdr = (wlan_ethhdr_t*) ((u8*) w_hdr + payload_offset); ++ e_llc = (wlan_llc_t*) e_hdr; ++ e_snap = (wlan_snap_t*) (e_llc + 1); ++ mtu = adev->ndev->mtu; ++ e_payload = (u8*) (e_snap + 1); ++ ++ log(L_DATA, "rx: payload_offset %d, payload_length %d\n", ++ payload_offset, payload_length); ++ log(L_XFER|L_DATA, ++ "rx: frame info: llc=%02X%02X%02X " ++ "snap.oui=%02X%02X%02X snap.type=%04X\n", ++ e_llc->dsap, e_llc->ssap, e_llc->ctl, ++ e_snap->oui[0], e_snap->oui[1], e_snap->oui[2], ++ ntohs(e_snap->type)); ++ ++ /* Test for the various encodings */ ++ if ((payload_length >= sizeof(wlan_ethhdr_t)) ++ && ((e_llc->dsap != 0xaa) || (e_llc->ssap != 0xaa)) ++ && ( (mac_is_equal(daddr, e_hdr->daddr)) ++ || (mac_is_equal(saddr, e_hdr->saddr)) ++ ) ++ ) { ++ /* 802.3 Encapsulated: */ ++ /* wlan frame body contains complete eth frame (header+body) */ ++ log(L_DEBUG|L_DATA, "rx: 802.3 ENCAP len=%d\n", payload_length); ++ ++ if (unlikely(payload_length > (mtu + ETH_HLEN))) { ++ printk("%s: rx: ENCAP frame too large (%d > %d)\n", ++ adev->ndev->name, ++ payload_length, mtu + ETH_HLEN); ++ goto ret_null; ++ } ++ ++ /* allocate space and setup host buffer */ ++ buflen = payload_length; ++ /* Attempt to align IP header (14 bytes eth header + 2 = 16) */ ++ skb = dev_alloc_skb(buflen + 2); ++ if (unlikely(!skb)) ++ goto no_skb; ++ skb_reserve(skb, 2); ++ skb_put(skb, buflen); /* make room */ ++ ++ /* now copy the data from the 80211 frame */ ++ memcpy(skb->data, e_hdr, payload_length); ++ ++ } else if ( (payload_length >= sizeof(wlan_llc_t)+sizeof(wlan_snap_t)) ++ && llc_is_snap(e_llc) ) { ++ /* wlan frame body contains: AA AA 03 ... (it's a SNAP) */ ++ ++ if ( !oui_is_rfc1042(e_snap) ++ || (proto_is_stt(ieee2host16(e_snap->type)) /* && (ethconv == WLAN_ETHCONV_8021h) */)) { ++ log(L_DEBUG|L_DATA, "rx: SNAP+RFC1042 len=%d\n", payload_length); ++ /* wlan frame body contains: AA AA 03 !(00 00 00) ... -or- */ ++ /* wlan frame body contains: AA AA 03 00 00 00 0x80f3 ... */ ++ /* build eth hdr, type = len, copy AA AA 03... as eth body */ ++ /* it's a SNAP + RFC1042 frame && protocol is in STT */ ++ ++ if (unlikely(payload_length > mtu)) { ++ printk("%s: rx: SNAP frame too large (%d > %d)\n", ++ adev->ndev->name, ++ payload_length, mtu); ++ goto ret_null; ++ } ++ ++ /* allocate space and setup host buffer */ ++ buflen = payload_length + ETH_HLEN; ++ skb = dev_alloc_skb(buflen + 2); ++ if (unlikely(!skb)) ++ goto no_skb; ++ skb_reserve(skb, 2); ++ skb_put(skb, buflen); /* make room */ ++ ++ /* create 802.3 header */ ++ e_hdr = (wlan_ethhdr_t*) skb->data; ++ MAC_COPY(e_hdr->daddr, daddr); ++ MAC_COPY(e_hdr->saddr, saddr); ++ e_hdr->type = htons(payload_length); ++ ++ /* Now copy the data from the 80211 frame. ++ Make room in front for the eth header, and keep the ++ llc and snap from the 802.11 payload */ ++ memcpy(skb->data + ETH_HLEN, ++ e_llc, payload_length); ++ ++ } else { ++ /* wlan frame body contains: AA AA 03 00 00 00 [type] [tail] */ ++ /* build eth hdr, type=[type], copy [tail] as eth body */ ++ log(L_DEBUG|L_DATA, "rx: 802.1h/RFC1042 len=%d\n", ++ payload_length); ++ /* it's an 802.1h frame (an RFC1042 && protocol is not in STT) */ ++ /* build a DIXII + RFC894 */ ++ ++ payload_length -= sizeof(wlan_llc_t) + sizeof(wlan_snap_t); ++ if (unlikely(payload_length > mtu)) { ++ printk("%s: rx: DIXII frame too large (%d > %d)\n", ++ adev->ndev->name, ++ payload_length, mtu); ++ goto ret_null; ++ } ++ ++ /* allocate space and setup host buffer */ ++ buflen = payload_length + ETH_HLEN; ++ skb = dev_alloc_skb(buflen + 2); ++ if (unlikely(!skb)) ++ goto no_skb; ++ skb_reserve(skb, 2); ++ skb_put(skb, buflen); /* make room */ ++ ++ /* create 802.3 header */ ++ e_hdr = (wlan_ethhdr_t *) skb->data; ++ MAC_COPY(e_hdr->daddr, daddr); ++ MAC_COPY(e_hdr->saddr, saddr); ++ e_hdr->type = e_snap->type; ++ ++ /* Now copy the data from the 80211 frame. ++ Make room in front for the eth header, and cut off the ++ llc and snap from the 802.11 payload */ ++ memcpy(skb->data + ETH_HLEN, ++ e_payload, payload_length); ++ } ++ ++ } else { ++ log(L_DEBUG|L_DATA, "rx: NON-ENCAP len=%d\n", payload_length); ++ /* build eth hdr, type=len, copy wlan body as eth body */ ++ /* any NON-ENCAP */ ++ /* it's a generic 80211+LLC or IPX 'Raw 802.3' */ ++ /* build an 802.3 frame */ ++ ++ if (unlikely(payload_length > mtu)) { ++ printk("%s: rx: OTHER frame too large (%d > %d)\n", ++ adev->ndev->name, payload_length, mtu); ++ goto ret_null; ++ } ++ ++ /* allocate space and setup host buffer */ ++ buflen = payload_length + ETH_HLEN; ++ skb = dev_alloc_skb(buflen + 2); ++ if (unlikely(!skb)) ++ goto no_skb; ++ skb_reserve(skb, 2); ++ skb_put(skb, buflen); /* make room */ ++ ++ /* set up the 802.3 header */ ++ e_hdr = (wlan_ethhdr_t *) skb->data; ++ MAC_COPY(e_hdr->daddr, daddr); ++ MAC_COPY(e_hdr->saddr, saddr); ++ e_hdr->type = htons(payload_length); ++ ++ /* now copy the data from the 80211 frame */ ++ memcpy(skb->data + ETH_HLEN, e_llc, payload_length); ++ } ++ ++ skb->dev = adev->ndev; ++ skb->protocol = eth_type_trans(skb, adev->ndev); ++ ++#ifdef DEBUG_CONVERT ++ if (acx_debug & L_DATA) { ++ int len = RXBUF_BYTES_RCVD(adev, rxbuf); ++ printk("p802.11 frame [%d]: ", len); ++ acx_dump_bytes(w_hdr, len); ++ printk("eth frame [%d]: ", skb->len); ++ acx_dump_bytes(skb->data, skb->len); ++ } ++#endif ++ ++ FN_EXIT0; ++ return skb; ++ ++no_skb: ++ printk("%s: rx: no memory for skb (%d bytes)\n", ++ adev->ndev->name, buflen + 2); ++ret_null: ++ FN_EXIT1((int)NULL); ++ return NULL; ++} +Index: linux-2.6.23/drivers/net/wireless/acx/cs.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/cs.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,5703 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++** ++** Slave memory interface support: ++** ++** Todd Blumer - SDG Systems ++** Bill Reese - HP ++** Eric McCorkle - Shadowsun ++** ++** CF support, (c) Fabrice Crohas, Paul Sokolovsky ++*/ ++#define ACX_MEM 1 ++ ++/* ++ * non-zero makes it dump the ACX memory to the console then ++ * panic when you cat /proc/driver/acx_wlan0_diag ++ */ ++#define DUMP_MEM_DEFINED 1 ++ ++#define DUMP_MEM_DURING_DIAG 0 ++#define DUMP_IF_SLOW 0 ++ ++#define PATCH_AROUND_BAD_SPOTS 1 ++#define HX4700_FIRMWARE_CHECKSUM 0x0036862e ++#define HX4700_ALTERNATE_FIRMWARE_CHECKSUM 0x00368a75 ++ ++#include ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) ++#include ++#endif ++ ++/* Linux 2.6.18+ uses */ ++#ifndef UTS_RELEASE ++#include ++#endif ++ ++#include /* required for Lx 2.6.8 ?? */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define PCMCIA_DEBUG 1 ++ ++/* ++ All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If ++ you do not define PCMCIA_DEBUG at all, all the debug code will be ++ left out. If you compile with PCMCIA_DEBUG=0, the debug code will ++ be present but disabled -- but it can then be enabled for specific ++ modules at load time with a 'pc_debug=#' option to insmod. ++ ++*/ ++#include ++#include ++#include ++#include ++#include ++#include "acx.h" ++#include "acx_hw.h" ++ ++#ifdef PCMCIA_DEBUG ++static int pc_debug = PCMCIA_DEBUG; ++module_param(pc_debug, int, 0); ++static char *version = "$Revision: 1.10 $"; ++#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); ++#else ++#define DEBUG(n, args...) ++#endif ++ ++ ++static win_req_t memwin; ++ ++typedef struct local_info_t { ++ dev_node_t node; ++ struct net_device *ndev; ++} local_info_t; ++ ++static struct net_device *resume_ndev; ++ ++ ++/*********************************************************************** ++*/ ++ ++#define CARD_EEPROM_ID_SIZE 6 ++ ++#include ++ ++#define REG_ACX_VENDOR_ID 0x900 ++/* ++ * This is the vendor id on the HX4700, anyway ++ */ ++#define ACX_VENDOR_ID 0x8400104c ++ ++typedef enum { ++ ACX_SOFT_RESET = 0, ++ ++ ACX_SLV_REG_ADDR, ++ ACX_SLV_REG_DATA, ++ ACX_SLV_REG_ADATA, ++ ++ ACX_SLV_MEM_CP, ++ ACX_SLV_MEM_ADDR, ++ ACX_SLV_MEM_DATA, ++ ACX_SLV_MEM_CTL, ++} acxreg_t; ++ ++/*********************************************************************** ++*/ ++static void acxmem_i_tx_timeout(struct net_device *ndev); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) ++static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id); ++#else ++static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id, struct pt_regs *regs); ++#endif ++static void acxmem_i_set_multicast_list(struct net_device *ndev); ++ ++static int acxmem_e_open(struct net_device *ndev); ++static int acxmem_e_close(struct net_device *ndev); ++static void acxmem_s_up(struct net_device *ndev); ++static void acxmem_s_down(struct net_device *ndev); ++ ++static void dump_acxmem (acx_device_t *adev, u32 start, int length); ++static int acxmem_complete_hw_reset (acx_device_t *adev); ++static void acxmem_s_delete_dma_regions(acx_device_t *adev); ++ ++static int ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) ++acxmem_e_suspend( struct net_device *ndev, pm_message_t state); ++#else ++acxmem_e_suspend( struct net_device *ndev, u32 state); ++#endif ++static void ++fw_resumer(struct work_struct *notused); ++//fw_resumer( void *data ); ++ ++static int acx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) ++{ ++ struct net_device *ndev = ptr; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ /* ++ * Upper level ioctl() handlers send a NETDEV_CHANGEADDR if the MAC address changes. ++ */ ++ ++ if (NETDEV_CHANGEADDR == event) { ++ /* ++ * the upper layers put the new MAC address in ndev->dev_addr; we just copy ++ * it over and update the ACX with it. ++ */ ++ MAC_COPY(adev->dev_addr, adev->ndev->dev_addr); ++ adev->set_mask |= GETSET_STATION_ID; ++ acx_s_update_card_settings (adev); ++ } ++ ++ return 0; ++} ++ ++static struct notifier_block acx_netdev_notifier = { ++ .notifier_call = acx_netdev_event, ++}; ++ ++/*********************************************************************** ++** Register access ++*/ ++ ++/* Pick one */ ++/* #define INLINE_IO static */ ++#define INLINE_IO static inline ++ ++INLINE_IO u32 ++read_id_register (acx_device_t *adev) ++{ ++ writel (0x24, &adev->iobase[ACX_SLV_REG_ADDR]); ++ return readl (&adev->iobase[ACX_SLV_REG_DATA]); ++} ++ ++INLINE_IO u32 ++read_reg32(acx_device_t *adev, unsigned int offset) ++{ ++ u32 val; ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) { ++ return readl(((u8*)adev->iobase) + addr); ++ } ++ ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ val = readl( &adev->iobase[ACX_SLV_REG_DATA] ); ++ ++ return val; ++} ++ ++INLINE_IO u16 ++read_reg16(acx_device_t *adev, unsigned int offset) ++{ ++ u16 lo; ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) { ++ return readw(((u8 *) adev->iobase) + addr); ++ } ++ ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ lo = readw( (u16 *)&adev->iobase[ACX_SLV_REG_DATA] ); ++ ++ return lo; ++} ++ ++INLINE_IO u8 ++read_reg8(acx_device_t *adev, unsigned int offset) ++{ ++ u8 lo; ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) ++ return readb(((u8 *)adev->iobase) + addr); ++ ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ lo = readw( (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); ++ ++ return (u8)lo; ++} ++ ++INLINE_IO void ++write_reg32(acx_device_t *adev, unsigned int offset, u32 val) ++{ ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) { ++ writel(val, ((u8*)adev->iobase) + addr); ++ return; ++ } ++ ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ writel( val, &adev->iobase[ACX_SLV_REG_DATA] ); ++} ++ ++INLINE_IO void ++write_reg16(acx_device_t *adev, unsigned int offset, u16 val) ++{ ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) { ++ writew(val, ((u8 *)adev->iobase) + addr); ++ return; ++ } ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ writew( val, (u16 *) &adev->iobase[ACX_SLV_REG_DATA] ); ++} ++ ++INLINE_IO void ++write_reg8(acx_device_t *adev, unsigned int offset, u8 val) ++{ ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) { ++ writeb(val, ((u8 *) adev->iobase) + addr); ++ return; ++ } ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ writeb( val, (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); ++} ++ ++/* Handle PCI posting properly: ++ * Make sure that writes reach the adapter in case they require to be executed ++ * *before* the next write, by reading a random (and safely accessible) register. ++ * This call has to be made if there is no read following (which would flush the data ++ * to the adapter), yet the written data has to reach the adapter immediately. */ ++INLINE_IO void ++write_flush(acx_device_t *adev) ++{ ++ /* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */ ++ /* faster version (accesses the first register, IO_ACX_SOFT_RESET, ++ * which should also be safe): */ ++ (void) readl(adev->iobase); ++} ++ ++INLINE_IO void ++set_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { ++ u32 tmp; ++ ++ tmp = read_reg32 (adev, offset); ++ tmp = tmp | bits; ++ write_reg32 (adev, offset, tmp); ++ write_flush (adev); ++} ++ ++INLINE_IO void ++clear_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { ++ u32 tmp; ++ ++ tmp = read_reg32 (adev, offset); ++ tmp = tmp & ~bits; ++ write_reg32 (adev, offset, tmp); ++ write_flush (adev); ++} ++ ++/* ++ * Copy from PXA memory to the ACX memory. This assumes both the PXA and ACX ++ * addresses are 32 bit aligned. Count is in bytes. ++ */ ++INLINE_IO void ++write_slavemem32 (acx_device_t *adev, u32 slave_address, u32 val) ++{ ++ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); ++ udelay (10); ++ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, val); ++} ++ ++INLINE_IO u32 ++read_slavemem32 (acx_device_t *adev, u32 slave_address) ++{ ++ u32 val; ++ ++ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); ++ udelay (10); ++ val = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); ++ ++ return val; ++} ++ ++INLINE_IO void ++write_slavemem8 (acx_device_t *adev, u32 slave_address, u8 val) ++{ ++ u32 data; ++ u32 base; ++ int offset; ++ ++ /* ++ * Get the word containing the target address and the byte offset in that word. ++ */ ++ base = slave_address & ~3; ++ offset = (slave_address & 3) * 8; ++ ++ data = read_slavemem32 (adev, base); ++ data &= ~(0xff << offset); ++ data |= val << offset; ++ write_slavemem32 (adev, base, data); ++} ++ ++INLINE_IO u8 ++read_slavemem8 (acx_device_t *adev, u32 slave_address) ++{ ++ u8 val; ++ u32 base; ++ u32 data; ++ int offset; ++ ++ base = slave_address & ~3; ++ offset = (slave_address & 3) * 8; ++ ++ data = read_slavemem32 (adev, base); ++ ++ val = (data >> offset) & 0xff; ++ ++ return val; ++} ++ ++/* ++ * doesn't split across word boundaries ++ */ ++INLINE_IO void ++write_slavemem16 (acx_device_t *adev, u32 slave_address, u16 val) ++{ ++ u32 data; ++ u32 base; ++ int offset; ++ ++ /* ++ * Get the word containing the target address and the byte offset in that word. ++ */ ++ base = slave_address & ~3; ++ offset = (slave_address & 3) * 8; ++ ++ data = read_slavemem32 (adev, base); ++ data &= ~(0xffff << offset); ++ data |= val << offset; ++ write_slavemem32 (adev, base, data); ++} ++ ++/* ++ * doesn't split across word boundaries ++ */ ++INLINE_IO u16 ++read_slavemem16 (acx_device_t *adev, u32 slave_address) ++{ ++ u16 val; ++ u32 base; ++ u32 data; ++ int offset; ++ ++ base = slave_address & ~3; ++ offset = (slave_address & 3) * 8; ++ ++ data = read_slavemem32 (adev, base); ++ ++ val = (data >> offset) & 0xffff; ++ ++ return val; ++} ++ ++/* ++ * Copy from slave memory ++ * ++ * TODO - rewrite using address autoincrement, handle partial words ++ */ ++void ++copy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) { ++ u32 tmp = 0; ++ u8 *ptmp = (u8 *) &tmp; ++ ++ /* ++ * Right now I'm making the assumption that the destination is aligned, but ++ * I'd better check. ++ */ ++ if ((u32) destination & 3) { ++ printk ("acx copy_from_slavemem: warning! destination not word-aligned!\n"); ++ } ++ ++ while (count >= 4) { ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); ++ udelay (10); ++ *((u32 *) destination) = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); ++ count -= 4; ++ source += 4; ++ destination += 4; ++ } ++ ++ /* ++ * If the word reads above didn't satisfy the count, read one more word ++ * and transfer a byte at a time until the request is satisfied. ++ */ ++ if (count) { ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); ++ udelay (10); ++ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); ++ while (count--) { ++ *destination++ = *ptmp++; ++ } ++ } ++} ++ ++/* ++ * Copy to slave memory ++ * ++ * TODO - rewrite using autoincrement, handle partial words ++ */ ++void ++copy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) ++{ ++ u32 tmp = 0; ++ u8* ptmp = (u8 *) &tmp; ++ static u8 src[512]; /* make static to avoid huge stack objects */ ++ ++ /* ++ * For now, make sure the source is word-aligned by copying it to a word-aligned ++ * buffer. Someday rewrite to avoid the extra copy. ++ */ ++ if (count > sizeof (src)) { ++ printk ("acx copy_to_slavemem: Warning! buffer overflow!\n"); ++ count = sizeof (src); ++ } ++ memcpy (src, source, count); ++ source = src; ++ ++ while (count >= 4) { ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); ++ udelay (10); ++ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, *((u32 *) source)); ++ count -= 4; ++ source += 4; ++ destination += 4; ++ } ++ ++ /* ++ * If there are leftovers read the next word from the acx and merge in ++ * what they want to write. ++ */ ++ if (count) { ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); ++ udelay (10); ++ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); ++ while (count--) { ++ *ptmp++ = *source++; ++ } ++ /* ++ * reset address in case we're currently in auto-increment mode ++ */ ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); ++ udelay (10); ++ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, tmp); ++ udelay (10); ++ } ++ ++} ++ ++/* ++ * Block copy to slave buffers using memory block chain mode. Copies to the ACX ++ * transmit buffer structure with minimal intervention on our part. ++ * Interrupts should be disabled when calling this. ++ */ ++void ++chaincopy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) ++{ ++ u32 val; ++ u32 *data = (u32 *) source; ++ static u8 aligned_source[WLAN_A4FR_MAXLEN_WEP_FCS]; ++ ++ /* ++ * Warn if the pointers don't look right. Destination must fit in [23:5] with ++ * zero elsewhere and source should be 32 bit aligned. ++ * This should never happen since we're in control of both, but I want to know about ++ * it if it does. ++ */ ++ if ((destination & 0x00ffffe0) != destination) { ++ printk ("acx chaincopy: destination block 0x%04x not aligned!\n", destination); ++ } ++ if (count > sizeof aligned_source) { ++ printk( KERN_ERR "chaincopy_to_slavemem overflow!\n" ); ++ count = sizeof aligned_source; ++ } ++ if ((u32) source & 3) { ++ memcpy (aligned_source, source, count); ++ data = (u32 *) aligned_source; ++ } ++ ++ /* ++ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment ++ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word ++ */ ++ val = 2 << 16 | 1 << 2; ++ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); ++ ++ /* ++ * SLV_MEM_CP[23:5] = start of 1st block ++ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 ++ */ ++ val = destination & 0x00ffffe0; ++ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); ++ ++ /* ++ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] ++ */ ++ val = (destination & 0x00ffffe0) + (1<<2); ++ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); ++ ++ /* ++ * Write the data to the slave data register, rounding up to the end ++ * of the word containing the last byte (hence the > 0) ++ */ ++ while (count > 0) { ++ writel (*data++, &adev->iobase[ACX_SLV_MEM_DATA]); ++ count -= 4; ++ } ++} ++ ++ ++/* ++ * Block copy from slave buffers using memory block chain mode. Copies from the ACX ++ * receive buffer structures with minimal intervention on our part. ++ * Interrupts should be disabled when calling this. ++ */ ++void ++chaincopy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) ++{ ++ u32 val; ++ u32 *data = (u32 *) destination; ++ static u8 aligned_destination[WLAN_A4FR_MAXLEN_WEP_FCS]; ++ int saved_count = count; ++ ++ /* ++ * Warn if the pointers don't look right. Destination must fit in [23:5] with ++ * zero elsewhere and source should be 32 bit aligned. ++ * Turns out the network stack sends unaligned things, so fix them before ++ * copying to the ACX. ++ */ ++ if ((source & 0x00ffffe0) != source) { ++ printk ("acx chaincopy: source block 0x%04x not aligned!\n", source); ++ dump_acxmem (adev, 0, 0x10000); ++ } ++ if ((u32) destination & 3) { ++ //printk ("acx chaincopy: data destination not word aligned!\n"); ++ data = (u32 *) aligned_destination; ++ if (count > sizeof aligned_destination) { ++ printk( KERN_ERR "chaincopy_from_slavemem overflow!\n" ); ++ count = sizeof aligned_destination; ++ } ++ } ++ ++ /* ++ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment ++ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word ++ */ ++ val = (2 << 16) | (1 << 2); ++ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); ++ ++ /* ++ * SLV_MEM_CP[23:5] = start of 1st block ++ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 ++ */ ++ val = source & 0x00ffffe0; ++ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); ++ ++ /* ++ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] ++ */ ++ val = (source & 0x00ffffe0) + (1<<2); ++ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); ++ ++ /* ++ * Read the data from the slave data register, rounding up to the end ++ * of the word containing the last byte (hence the > 0) ++ */ ++ while (count > 0) { ++ *data++ = readl (&adev->iobase[ACX_SLV_MEM_DATA]); ++ count -= 4; ++ } ++ ++ /* ++ * If the destination wasn't aligned, we would have saved it in ++ * the aligned buffer, so copy it where it should go. ++ */ ++ if ((u32) destination & 3) { ++ memcpy (destination, aligned_destination, saved_count); ++ } ++} ++ ++char ++printable (char c) ++{ ++ return ((c >= 20) && (c < 127)) ? c : '.'; ++} ++ ++#if DUMP_MEM_DEFINED > 0 ++static void ++dump_acxmem (acx_device_t *adev, u32 start, int length) ++{ ++ int i; ++ u8 buf[16]; ++ ++ while (length > 0) { ++ printk ("%04x ", start); ++ copy_from_slavemem (adev, buf, start, 16); ++ for (i = 0; (i < 16) && (i < length); i++) { ++ printk ("%02x ", buf[i]); ++ } ++ for (i = 0; (i < 16) && (i < length); i++) { ++ printk ("%c", printable (buf[i])); ++ } ++ printk ("\n"); ++ start += 16; ++ length -= 16; ++ } ++} ++#endif ++ ++static void ++enable_acx_irq(acx_device_t *adev); ++static void ++disable_acx_irq(acx_device_t *adev); ++ ++/* ++ * Return an acx pointer to the next transmit data block. ++ */ ++u32 ++allocate_acx_txbuf_space (acx_device_t *adev, int count) { ++ u32 block, next, last_block; ++ int blocks_needed; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&adev->txbuf_lock, flags); ++ /* ++ * Take 4 off the memory block size to account for the reserved word at the start of ++ * the block. ++ */ ++ blocks_needed = count / (adev->memblocksize - 4); ++ if (count % (adev->memblocksize - 4)) ++ blocks_needed++; ++ ++ if (blocks_needed <= adev->acx_txbuf_blocks_free) { ++ /* ++ * Take blocks at the head of the free list. ++ */ ++ last_block = block = adev->acx_txbuf_free; ++ ++ /* ++ * Follow block pointers through the requested number of blocks both to ++ * find the new head of the free list and to set the flags for the blocks ++ * appropriately. ++ */ ++ while (blocks_needed--) { ++ /* ++ * Keep track of the last block of the allocation ++ */ ++ last_block = adev->acx_txbuf_free; ++ ++ /* ++ * Make sure the end control flag is not set. ++ */ ++ next = read_slavemem32 (adev, adev->acx_txbuf_free) & 0x7ffff; ++ write_slavemem32 (adev, adev->acx_txbuf_free, next); ++ ++ /* ++ * Update the new head of the free list ++ */ ++ adev->acx_txbuf_free = next << 5; ++ adev->acx_txbuf_blocks_free--; ++ ++ } ++ ++ /* ++ * Flag the last block both by clearing out the next pointer ++ * and marking the control field. ++ */ ++ write_slavemem32 (adev, last_block, 0x02000000); ++ ++ /* ++ * If we're out of buffers make sure the free list pointer is NULL ++ */ ++ if (!adev->acx_txbuf_blocks_free) { ++ adev->acx_txbuf_free = 0; ++ } ++ } ++ else { ++ block = 0; ++ } ++ spin_unlock_irqrestore (&adev->txbuf_lock, flags); ++ return block; ++} ++ ++/* ++ * Return buffer space back to the pool by following the next pointers until we find ++ * the block marked as the end. Point the last block to the head of the free list, ++ * then update the head of the free list to point to the newly freed memory. ++ * This routine gets called in interrupt context, so it shouldn't block to protect ++ * the integrity of the linked list. The ISR already holds the lock. ++ */ ++void ++reclaim_acx_txbuf_space (acx_device_t *adev, u32 blockptr) { ++ u32 cur, last, next; ++ unsigned long flags; ++ ++ spin_lock_irqsave (&adev->txbuf_lock, flags); ++ if ((blockptr >= adev->acx_txbuf_start) && ++ (blockptr <= adev->acx_txbuf_start + ++ (adev->acx_txbuf_numblocks - 1) * adev->memblocksize)) { ++ cur = blockptr; ++ do { ++ last = cur; ++ next = read_slavemem32 (adev, cur); ++ ++ /* ++ * Advance to the next block in this allocation ++ */ ++ cur = (next & 0x7ffff) << 5; ++ ++ /* ++ * This block now counts as free. ++ */ ++ adev->acx_txbuf_blocks_free++; ++ } while (!(next & 0x02000000)); ++ ++ /* ++ * last now points to the last block of that allocation. Update the pointer ++ * in that block to point to the free list and reset the free list to the ++ * first block of the free call. If there were no free blocks, make sure ++ * the new end of the list marks itself as truly the end. ++ */ ++ if (adev->acx_txbuf_free) { ++ write_slavemem32 (adev, last, adev->acx_txbuf_free >> 5); ++ } ++ else { ++ write_slavemem32 (adev, last, 0x02000000); ++ } ++ adev->acx_txbuf_free = blockptr; ++ } ++ spin_unlock_irqrestore(&adev->txbuf_lock, flags); ++} ++ ++/* ++ * Initialize the pieces managing the transmit buffer pool on the ACX. The transmit ++ * buffer is a circular queue with one 32 bit word reserved at the beginning of each ++ * block. The upper 13 bits are a control field, of which only 0x02000000 has any ++ * meaning. The lower 19 bits are the address of the next block divided by 32. ++ */ ++void ++init_acx_txbuf (acx_device_t *adev) { ++ ++ /* ++ * acx100_s_init_memory_pools set up txbuf_start and txbuf_numblocks for us. ++ * All we need to do is reset the rest of the bookeeping. ++ */ ++ ++ adev->acx_txbuf_free = adev->acx_txbuf_start; ++ adev->acx_txbuf_blocks_free = adev->acx_txbuf_numblocks; ++ ++ /* ++ * Initialization leaves the last transmit pool block without a pointer back to ++ * the head of the list, but marked as the end of the list. That's how we want ++ * to see it, too, so leave it alone. This is only ever called after a firmware ++ * reset, so the ACX memory is in the state we want. ++ */ ++ ++} ++ ++INLINE_IO int ++adev_present(acx_device_t *adev) ++{ ++ /* fast version (accesses the first register, IO_ACX_SOFT_RESET, ++ * which should be safe): */ ++ return readl(adev->iobase) != 0xffffffff; ++} ++ ++/*********************************************************************** ++*/ ++static inline txdesc_t* ++get_txdesc(acx_device_t *adev, int index) ++{ ++ return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size); ++} ++ ++static inline txdesc_t* ++advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc) ++{ ++ return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size); ++} ++ ++static txhostdesc_t* ++get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ index /= adev->txdesc_size; ++ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ return &adev->txhostdesc_start[index*2]; ++} ++ ++static inline client_t* ++get_txc(acx_device_t *adev, txdesc_t* txdesc) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ index /= adev->txdesc_size; ++ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ return adev->txc[index]; ++} ++ ++static inline u16 ++get_txr(acx_device_t *adev, txdesc_t* txdesc) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ index /= adev->txdesc_size; ++ return adev->txr[index]; ++} ++ ++static inline void ++put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return; ++ } ++ index /= adev->txdesc_size; ++ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return; ++ } ++ adev->txc[index] = c; ++ adev->txr[index] = r111; ++} ++ ++ ++/*********************************************************************** ++** EEPROM and PHY read/write helpers ++*/ ++/*********************************************************************** ++** acxmem_read_eeprom_byte ++** ++** Function called to read an octet in the EEPROM. ++** ++** This function is used by acxmem_e_probe to check if the ++** connected card is a legal one or not. ++** ++** Arguments: ++** adev ptr to acx_device structure ++** addr address to read in the EEPROM ++** charbuf ptr to a char. This is where the read octet ++** will be stored ++*/ ++int ++acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf) ++{ ++ int result; ++ int count; ++ ++ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); ++ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); ++ ++ count = 0xffff; ++ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { ++ /* scheduling away instead of CPU burning loop ++ * doesn't seem to work here at all: ++ * awful delay, sometimes also failure. ++ * Doesn't matter anyway (only small delay). */ ++ if (unlikely(!--count)) { ++ printk("%s: timeout waiting for EEPROM read\n", ++ adev->ndev->name); ++ result = NOT_OK; ++ goto fail; ++ } ++ cpu_relax(); ++ } ++ ++ *charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA); ++ log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf); ++ result = OK; ++ ++fail: ++ return result; ++} ++ ++ ++/*********************************************************************** ++** We don't lock hw accesses here since we never r/w eeprom in IRQ ++** Note: this function sleeps only because of GFP_KERNEL alloc ++*/ ++#ifdef UNUSED ++int ++acxmem_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf) ++{ ++ u8 *data_verify = NULL; ++ unsigned long flags; ++ int count, i; ++ int result = NOT_OK; ++ u16 gpio_orig; ++ ++ printk("acx: WARNING! I would write to EEPROM now. " ++ "Since I really DON'T want to unless you know " ++ "what you're doing (THIS CODE WILL PROBABLY " ++ "NOT WORK YET!), I will abort that now. And " ++ "definitely make sure to make a " ++ "/proc/driver/acx_wlan0_eeprom backup copy first!!! " ++ "(the EEPROM content includes the PCI config header!! " ++ "If you kill important stuff, then you WILL " ++ "get in trouble and people DID get in trouble already)\n"); ++ return OK; ++ ++ FN_ENTER; ++ ++ data_verify = kmalloc(len, GFP_KERNEL); ++ if (!data_verify) { ++ goto end; ++ } ++ ++ /* first we need to enable the OE (EEPROM Output Enable) GPIO line ++ * to be able to write to the EEPROM. ++ * NOTE: an EEPROM writing success has been reported, ++ * but you probably have to modify GPIO_OUT, too, ++ * and you probably need to activate a different GPIO ++ * line instead! */ ++ gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE); ++ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1); ++ write_flush(adev); ++ ++ /* ok, now start writing the data out */ ++ for (i = 0; i < len; i++) { ++ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); ++ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); ++ write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i)); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_EEPROM_CTL, 1); ++ ++ count = 0xffff; ++ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { ++ if (unlikely(!--count)) { ++ printk("WARNING, DANGER!!! " ++ "Timeout waiting for EEPROM write\n"); ++ goto end; ++ } ++ cpu_relax(); ++ } ++ } ++ ++ /* disable EEPROM writing */ ++ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig); ++ write_flush(adev); ++ ++ /* now start a verification run */ ++ for (i = 0; i < len; i++) { ++ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); ++ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); ++ ++ count = 0xffff; ++ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { ++ if (unlikely(!--count)) { ++ printk("timeout waiting for EEPROM read\n"); ++ goto end; ++ } ++ cpu_relax(); ++ } ++ ++ data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA); ++ } ++ ++ if (0 == memcmp(charbuf, data_verify, len)) ++ result = OK; /* read data matches, success */ ++ ++end: ++ kfree(data_verify); ++ FN_EXIT1(result); ++ return result; ++} ++#endif /* UNUSED */ ++ ++ ++/*********************************************************************** ++** acxmem_s_read_phy_reg ++** ++** Messing with rx/tx disabling and enabling here ++** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic ++*/ ++int ++acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) ++{ ++ int result = NOT_OK; ++ int count; ++ ++ FN_ENTER; ++ ++ write_reg32(adev, IO_ACX_PHY_ADDR, reg); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_PHY_CTL, 2); ++ ++ count = 0xffff; ++ while (read_reg32(adev, IO_ACX_PHY_CTL)) { ++ /* scheduling away instead of CPU burning loop ++ * doesn't seem to work here at all: ++ * awful delay, sometimes also failure. ++ * Doesn't matter anyway (only small delay). */ ++ if (unlikely(!--count)) { ++ printk("%s: timeout waiting for phy read\n", ++ adev->ndev->name); ++ *charbuf = 0; ++ goto fail; ++ } ++ cpu_relax(); ++ } ++ ++ log(L_DEBUG, "count was %u\n", count); ++ *charbuf = read_reg8(adev, IO_ACX_PHY_DATA); ++ ++ log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg); ++ result = OK; ++ goto fail; /* silence compiler warning */ ++fail: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) ++{ ++ int count; ++ FN_ENTER; ++ ++ /* mprusko said that 32bit accesses result in distorted sensitivity ++ * on his card. Unconfirmed, looks like it's not true (most likely since we ++ * now properly flush writes). */ ++ write_reg32(adev, IO_ACX_PHY_DATA, value); ++ write_reg32(adev, IO_ACX_PHY_ADDR, reg); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_PHY_CTL, 1); ++ write_flush(adev); ++ ++ count = 0xffff; ++ while (read_reg32(adev, IO_ACX_PHY_CTL)) { ++ /* scheduling away instead of CPU burning loop ++ * doesn't seem to work here at all: ++ * awful delay, sometimes also failure. ++ * Doesn't matter anyway (only small delay). */ ++ if (unlikely(!--count)) { ++ printk("%s: timeout waiting for phy read\n", ++ adev->ndev->name); ++ goto fail; ++ } ++ cpu_relax(); ++ } ++ ++ log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg); ++ fail: ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++#define NO_AUTO_INCREMENT 1 ++ ++/*********************************************************************** ++** acxmem_s_write_fw ++** ++** Write the firmware image into the card. ++** ++** Arguments: ++** adev wlan device structure ++** fw_image firmware image. ++** ++** Returns: ++** 1 firmware image corrupted ++** 0 success ++*/ ++static int ++acxmem_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset) ++{ ++ int len, size, checkMismatch = -1; ++ u32 sum, v32, tmp, id; ++ /* we skip the first four bytes which contain the control sum */ ++ const u8 *p = (u8*)fw_image + 4; ++ ++ /* start the image checksum by adding the image size value */ ++ sum = p[0]+p[1]+p[2]+p[3]; ++ p += 4; ++ ++#ifdef NOPE ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ ++#else ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ ++ write_flush(adev); ++#endif ++#endif ++ len = 0; ++ size = le32_to_cpu(fw_image->size) & (~3); ++ ++ while (likely(len < size)) { ++ v32 = be32_to_cpu(*(u32*)p); ++ sum += p[0]+p[1]+p[2]+p[3]; ++ p += 4; ++ len += 4; ++ ++#ifdef NOPE ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); ++ write_flush(adev); ++#endif ++ write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32); ++ write_flush(adev); ++#endif ++ write_slavemem32 (adev, offset + len - 4, v32); ++ ++ id = read_id_register (adev); ++ ++ /* ++ * check the data written ++ */ ++ tmp = read_slavemem32 (adev, offset + len - 4); ++ if (checkMismatch && (tmp != v32)) { ++ printk ("first data mismatch at 0x%08x good 0x%08x bad 0x%08x id 0x%08x\n", ++ offset + len - 4, v32, tmp, id); ++ checkMismatch = 0; ++ } ++ } ++ log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n", ++ size, sum, le32_to_cpu(fw_image->chksum)); ++ ++ /* compare our checksum with the stored image checksum */ ++ return (sum != le32_to_cpu(fw_image->chksum)); ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_validate_fw ++** ++** Compare the firmware image given with ++** the firmware image written into the card. ++** ++** Arguments: ++** adev wlan device structure ++** fw_image firmware image. ++** ++** Returns: ++** NOT_OK firmware image corrupted or not correctly written ++** OK success ++*/ ++static int ++acxmem_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image, ++ u32 offset) ++{ ++ u32 sum, v32, w32; ++ int len, size; ++ int result = OK; ++ /* we skip the first four bytes which contain the control sum */ ++ const u8 *p = (u8*)fw_image + 4; ++ ++ /* start the image checksum by adding the image size value */ ++ sum = p[0]+p[1]+p[2]+p[3]; ++ p += 4; ++ ++ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); ++ ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ ++#else ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ ++#endif ++ ++ len = 0; ++ size = le32_to_cpu(fw_image->size) & (~3); ++ ++ while (likely(len < size)) { ++ v32 = be32_to_cpu(*(u32*)p); ++ p += 4; ++ len += 4; ++ ++#ifdef NOPE ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); ++#endif ++ udelay(10); ++ w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA); ++#endif ++ w32 = read_slavemem32 (adev, offset + len - 4); ++ ++ if (unlikely(w32 != v32)) { ++ printk("acx: FATAL: firmware upload: " ++ "data parts at offset %d don't match\n(0x%08X vs. 0x%08X)!\n" ++ "I/O timing issues or defective memory, with DWL-xx0+? " ++ "ACX_IO_WIDTH=16 may help. Please report\n", ++ len, v32, w32); ++ result = NOT_OK; ++ break; ++ } ++ ++ sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24); ++ } ++ ++ /* sum control verification */ ++ if (result != NOT_OK) { ++ if (sum != le32_to_cpu(fw_image->chksum)) { ++ printk("acx: FATAL: firmware upload: " ++ "checksums don't match!\n"); ++ result = NOT_OK; ++ } ++ } ++ ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_upload_fw ++** ++** Called from acx_reset_dev ++*/ ++static int ++acxmem_s_upload_fw(acx_device_t *adev) ++{ ++ firmware_image_t *fw_image = NULL; ++ int res = NOT_OK; ++ int try; ++ u32 file_size; ++ char *filename = "WLANGEN.BIN"; ++#ifdef PATCH_AROUND_BAD_SPOTS ++ u32 offset; ++ int i; ++ /* ++ * arm-linux-objdump -d patch.bin, or ++ * od -Ax -t x4 patch.bin after finding the bounds ++ * of the .text section with arm-linux-objdump -s patch.bin ++ */ ++ u32 patch[] = { ++ 0xe584c030, 0xe59fc008, ++ 0xe92d1000, 0xe59fc004, 0xe8bd8000, 0x0000080c, ++ 0x0000aa68, 0x605a2200, 0x2c0a689c, 0x2414d80a, ++ 0x2f00689f, 0x1c27d007, 0x06241e7c, 0x2f000e24, ++ 0xe000d1f6, 0x602e6018, 0x23036468, 0x480203db, ++ 0x60ca6003, 0xbdf0750a, 0xffff0808 ++ }; ++#endif ++ ++ FN_ENTER; ++ /* No combined image; tell common we need the radio firmware, too */ ++ adev->need_radio_fw = 1; ++ ++ fw_image = acx_s_read_fw(adev->dev, filename, &file_size); ++ if (!fw_image) { ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++ } ++ ++ for (try = 1; try <= 5; try++) { ++ res = acxmem_s_write_fw(adev, fw_image, 0); ++ log(L_DEBUG|L_INIT, "acx_write_fw (main): %d\n", res); ++ if (OK == res) { ++ res = acxmem_s_validate_fw(adev, fw_image, 0); ++ log(L_DEBUG|L_INIT, "acx_validate_fw " ++ "(main): %d\n", res); ++ } ++ ++ if (OK == res) { ++ SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED); ++ break; ++ } ++ printk("acx: firmware upload attempt #%d FAILED, " ++ "retrying...\n", try); ++ acx_s_msleep(1000); /* better wait for a while... */ ++ } ++ ++#ifdef PATCH_AROUND_BAD_SPOTS ++ /* ++ * Only want to do this if the firmware is exactly what we expect for an ++ * iPaq 4700; otherwise, bad things would ensue. ++ */ ++ if ((HX4700_FIRMWARE_CHECKSUM == fw_image->chksum) || ++ (HX4700_ALTERNATE_FIRMWARE_CHECKSUM == fw_image->chksum)) { ++ /* ++ * Put the patch after the main firmware image. 0x950c contains ++ * the ACX's idea of the end of the firmware. Use that location to ++ * load ours (which depends on that location being 0xab58) then ++ * update that location to point to after ours. ++ */ ++ ++ offset = read_slavemem32 (adev, 0x950c); ++ ++ log (L_DEBUG, "acx: patching in at 0x%04x\n", offset); ++ ++ for (i = 0; i < sizeof(patch) / sizeof(patch[0]); i++) { ++ write_slavemem32 (adev, offset, patch[i]); ++ offset += sizeof(u32); ++ } ++ ++ /* ++ * Patch the instruction at 0x0804 to branch to our ARM patch at 0xab58 ++ */ ++ write_slavemem32 (adev, 0x0804, 0xea000000 + (0xab58-0x0804-8)/4); ++ ++ /* ++ * Patch the instructions at 0x1f40 to branch to our Thumb patch at 0xab74 ++ * ++ * 4a00 ldr r2, [pc, #0] ++ * 4710 bx r2 ++ * .data 0xab74+1 ++ */ ++ write_slavemem32 (adev, 0x1f40, 0x47104a00); ++ write_slavemem32 (adev, 0x1f44, 0x0000ab74+1); ++ ++ /* ++ * Bump the end of the firmware up to beyond our patch. ++ */ ++ write_slavemem32 (adev, 0x950c, offset); ++ ++ } ++#endif ++ ++ vfree(fw_image); ++ ++ FN_EXIT1(res); ++ return res; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_upload_radio ++** ++** Uploads the appropriate radio module firmware into the card. ++*/ ++int ++acxmem_s_upload_radio(acx_device_t *adev) ++{ ++ acx_ie_memmap_t mm; ++ firmware_image_t *radio_image; ++ acx_cmd_radioinit_t radioinit; ++ int res = NOT_OK; ++ int try; ++ u32 offset; ++ u32 size; ++ char filename[sizeof("RADIONN.BIN")]; ++ ++ if (!adev->need_radio_fw) return OK; ++ ++ FN_ENTER; ++ ++ acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); ++ offset = le32_to_cpu(mm.CodeEnd); ++ ++ snprintf(filename, sizeof(filename), "RADIO%02x.BIN", ++ adev->radio_type); ++ radio_image = acx_s_read_fw(adev->dev, filename, &size); ++ if (!radio_image) { ++ printk("acx: can't load radio module '%s'\n", filename); ++ goto fail; ++ } ++ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); ++ ++ for (try = 1; try <= 5; try++) { ++ res = acxmem_s_write_fw(adev, radio_image, offset); ++ log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res); ++ if (OK == res) { ++ res = acxmem_s_validate_fw(adev, radio_image, offset); ++ log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res); ++ } ++ ++ if (OK == res) ++ break; ++ printk("acx: radio firmware upload attempt #%d FAILED, " ++ "retrying...\n", try); ++ acx_s_msleep(1000); /* better wait for a while... */ ++ } ++ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); ++ radioinit.offset = cpu_to_le32(offset); ++ ++ /* no endian conversion needed, remains in card CPU area: */ ++ radioinit.len = radio_image->size; ++ ++ vfree(radio_image); ++ ++ if (OK != res) ++ goto fail; ++ ++ /* will take a moment so let's have a big timeout */ ++ acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT, ++ &radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000)); ++ ++ res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); ++ ++fail: ++ FN_EXIT1(res); ++ return res; ++} ++ ++/*********************************************************************** ++** acxmem_l_reset_mac ++** ++** MAC will be reset ++** Call context: reset_dev ++*/ ++static void ++acxmem_l_reset_mac(acx_device_t *adev) ++{ ++ int count; ++ FN_ENTER; ++ ++ /* halt eCPU */ ++ set_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); ++ ++ /* now do soft reset of eCPU, set bit */ ++ set_regbits (adev, IO_ACX_SOFT_RESET, 0x1); ++ log(L_DEBUG, "%s: enable soft reset...\n", __func__); ++ ++ /* Windows driver sleeps here for a while with this sequence */ ++ for (count = 0; count < 200; count++) { ++ udelay (50); ++ } ++ ++ /* now clear bit again: deassert eCPU reset */ ++ log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__); ++ clear_regbits (adev, IO_ACX_SOFT_RESET, 0x1); ++ ++ /* now start a burst read from initial EEPROM */ ++ set_regbits (adev, IO_ACX_EE_START, 0x1); ++ ++ /* ++ * Windows driver sleeps here for a while with this sequence ++ */ ++ for (count = 0; count < 200; count++) { ++ udelay (50); ++ } ++ ++ /* Windows driver writes 0x10000 to register 0x808 here */ ++ ++ write_reg32 (adev, 0x808, 0x10000); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_verify_init ++*/ ++static int ++acxmem_s_verify_init(acx_device_t *adev) ++{ ++ int result = NOT_OK; ++ unsigned long timeout; ++ ++ FN_ENTER; ++ ++ timeout = jiffies + 2*HZ; ++ for (;;) { ++ u32 irqstat = read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES); ++ if ((irqstat != 0xFFFFFFFF) && (irqstat & HOST_INT_FCS_THRESHOLD)) { ++ result = OK; ++ write_reg32(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD); ++ break; ++ } ++ if (time_after(jiffies, timeout)) ++ break; ++ /* Init may take up to ~0.5 sec total */ ++ acx_s_msleep(50); ++ } ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** A few low-level helpers ++** ++** Note: these functions are not protected by lock ++** and thus are never allowed to be called from IRQ. ++** Also they must not race with fw upload which uses same hw regs ++*/ ++ ++/*********************************************************************** ++** acxmem_write_cmd_type_status ++*/ ++ ++static inline void ++acxmem_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status) ++{ ++ write_slavemem32 (adev, (u32) adev->cmd_area, type | (status << 16)); ++ write_flush(adev); ++} ++ ++ ++/*********************************************************************** ++** acxmem_read_cmd_type_status ++*/ ++static u32 ++acxmem_read_cmd_type_status(acx_device_t *adev) ++{ ++ u32 cmd_type, cmd_status; ++ ++ cmd_type = read_slavemem32 (adev, (u32) adev->cmd_area); ++ ++ cmd_status = (cmd_type >> 16); ++ cmd_type = (u16)cmd_type; ++ ++ log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n", ++ cmd_type, cmd_status, ++ acx_cmd_status_str(cmd_status)); ++ ++ return cmd_status; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_reset_dev ++** ++** Arguments: ++** netdevice that contains the adev variable ++** Returns: ++** NOT_OK on fail ++** OK on success ++** Side effects: ++** device is hard reset ++** Call context: ++** acxmem_e_probe ++** Comment: ++** This resets the device using low level hardware calls ++** as well as uploads and verifies the firmware to the card ++*/ ++ ++static inline void ++init_mboxes(acx_device_t *adev) ++{ ++ u32 cmd_offs, info_offs; ++ ++ cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS); ++ info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS); ++ adev->cmd_area = (u8*) cmd_offs; ++ adev->info_area = (u8*) info_offs; ++ /* ++ log(L_DEBUG, "iobase2=%p\n" ++ */ ++ log( L_DEBUG, "cmd_mbox_offset=%X cmd_area=%p\n" ++ "info_mbox_offset=%X info_area=%p\n", ++ cmd_offs, adev->cmd_area, ++ info_offs, adev->info_area); ++} ++ ++ ++static inline void ++read_eeprom_area(acx_device_t *adev) ++{ ++#if ACX_DEBUG > 1 ++ int offs; ++ u8 tmp; ++ ++ for (offs = 0x8c; offs < 0xb9; offs++) ++ acxmem_read_eeprom_byte(adev, offs, &tmp); ++#endif ++} ++ ++static int ++acxmem_s_reset_dev(acx_device_t *adev) ++{ ++ const char* msg = ""; ++ unsigned long flags; ++ int result = NOT_OK; ++ u16 hardware_info; ++ u16 ecpu_ctrl; ++ int count; ++ u32 tmp; ++ ++ FN_ENTER; ++ /* ++ write_reg32 (adev, IO_ACX_SLV_MEM_CP, 0); ++ */ ++ /* reset the device to make sure the eCPU is stopped ++ * to upload the firmware correctly */ ++ ++ acx_lock(adev, flags); ++ ++ /* Windows driver does some funny things here */ ++ /* ++ * clear bit 0x200 in register 0x2A0 ++ */ ++ clear_regbits (adev, 0x2A0, 0x200); ++ ++ /* ++ * Set bit 0x200 in ACX_GPIO_OUT ++ */ ++ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); ++ ++ /* ++ * read register 0x900 until its value is 0x8400104C, sleeping ++ * in between reads if it's not immediate ++ */ ++ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); ++ count = 500; ++ while (count-- && (tmp != ACX_VENDOR_ID)) { ++ mdelay (10); ++ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); ++ } ++ ++ /* end what Windows driver does */ ++ ++ acxmem_l_reset_mac(adev); ++ ++ ecpu_ctrl = read_reg32(adev, IO_ACX_ECPU_CTRL) & 1; ++ if (!ecpu_ctrl) { ++ msg = "eCPU is already running. "; ++ goto end_unlock; ++ } ++ ++#ifdef WE_DONT_NEED_THAT_DO_WE ++ if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) { ++ /* eCPU most likely means "embedded CPU" */ ++ msg = "eCPU did not start after boot from flash. "; ++ goto end_unlock; ++ } ++ ++ /* check sense on reset flags */ ++ if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) { ++ printk("%s: eCPU did not start after boot (SOR), " ++ "is this fatal?\n", adev->ndev->name); ++ } ++#endif ++ /* scan, if any, is stopped now, setting corresponding IRQ bit */ ++ adev->irq_status |= HOST_INT_SCAN_COMPLETE; ++ ++ acx_unlock(adev, flags); ++ ++ /* need to know radio type before fw load */ ++ /* Need to wait for arrival of this information in a loop, ++ * most probably since eCPU runs some init code from EEPROM ++ * (started burst read in reset_mac()) which also ++ * sets the radio type ID */ ++ ++ count = 0xffff; ++ do { ++ hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION); ++ if (!--count) { ++ msg = "eCPU didn't indicate radio type"; ++ goto end_fail; ++ } ++ cpu_relax(); ++ } while (!(hardware_info & 0xff00)); /* radio type still zero? */ ++ printk("ACX radio type 0x%02x\n", (hardware_info >> 8) & 0xff); ++ /* printk("DEBUG: count %d\n", count); */ ++ adev->form_factor = hardware_info & 0xff; ++ adev->radio_type = hardware_info >> 8; ++ ++ /* load the firmware */ ++ if (OK != acxmem_s_upload_fw(adev)) ++ goto end_fail; ++ ++ /* acx_s_msleep(10); this one really shouldn't be required */ ++ ++ /* now start eCPU by clearing bit */ ++ clear_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); ++ log(L_DEBUG, "booted eCPU up and waiting for completion...\n"); ++ ++ /* Windows driver clears bit 0x200 in register 0x2A0 here */ ++ clear_regbits (adev, 0x2A0, 0x200); ++ ++ /* Windows driver sets bit 0x200 in ACX_GPIO_OUT here */ ++ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); ++ /* wait for eCPU bootup */ ++ if (OK != acxmem_s_verify_init(adev)) { ++ msg = "timeout waiting for eCPU. "; ++ goto end_fail; ++ } ++ log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n"); ++ init_mboxes(adev); ++ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); ++ ++ /* test that EEPROM is readable */ ++ read_eeprom_area(adev); ++ ++ result = OK; ++ goto end; ++ ++/* Finish error message. Indicate which function failed */ ++end_unlock: ++ acx_unlock(adev, flags); ++end_fail: ++ printk("acx: %sreset_dev() FAILED\n", msg); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_issue_cmd_timeo ++** ++** Sends command to fw, extract result ++** ++** NB: we do _not_ take lock inside, so be sure to not touch anything ++** which may interfere with IRQ handler operation ++** ++** TODO: busy wait is a bit silly, so: ++** 1) stop doing many iters - go to sleep after first ++** 2) go to waitqueue based approach: wait, not poll! ++*/ ++#undef FUNC ++#define FUNC "issue_cmd" ++ ++#if !ACX_DEBUG ++int ++acxmem_s_issue_cmd_timeo( ++ acx_device_t *adev, ++ unsigned int cmd, ++ void *buffer, ++ unsigned buflen, ++ unsigned cmd_timeout) ++{ ++#else ++int ++acxmem_s_issue_cmd_timeo_debug( ++ acx_device_t *adev, ++ unsigned cmd, ++ void *buffer, ++ unsigned buflen, ++ unsigned cmd_timeout, ++ const char* cmdstr) ++{ ++ unsigned long start = jiffies; ++#endif ++ const char *devname; ++ unsigned counter; ++ u16 irqtype; ++ int i, j; ++ u8 *p; ++ u16 cmd_status; ++ unsigned long timeout; ++ ++ FN_ENTER; ++ ++ devname = adev->ndev->name; ++ if (!devname || !devname[0] || devname[4]=='%') ++ devname = "acx"; ++ ++ log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n", ++ cmdstr, buflen, cmd_timeout, ++ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); ++ ++ if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) { ++ printk("%s: "FUNC"(): firmware is not loaded yet, " ++ "cannot execute commands!\n", devname); ++ goto bad; ++ } ++ ++ if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) { ++ printk("input buffer (len=%u):\n", buflen); ++ acx_dump_bytes(buffer, buflen); ++ } ++ ++ /* wait for firmware to become idle for our command submission */ ++ timeout = HZ/5; ++ counter = (timeout * 1000 / HZ) - 1; /* in ms */ ++ timeout += jiffies; ++ do { ++ cmd_status = acxmem_read_cmd_type_status(adev); ++ /* Test for IDLE state */ ++ if (!cmd_status) ++ break; ++ if (counter % 8 == 0) { ++ if (time_after(jiffies, timeout)) { ++ counter = 0; ++ break; ++ } ++ /* we waited 8 iterations, no luck. Sleep 8 ms */ ++ acx_s_msleep(8); ++ } ++ } while (likely(--counter)); ++ ++ if (!counter) { ++ /* the card doesn't get idle, we're in trouble */ ++ printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n", ++ devname, cmd_status); ++#if DUMP_IF_SLOW > 0 ++ dump_acxmem (adev, 0, 0x10000); ++ panic ("not idle"); ++#endif ++ goto bad; ++ } else if (counter < 190) { /* if waited >10ms... */ ++ log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. " ++ "Please report\n", 199 - counter); ++ } ++ ++ /* now write the parameters of the command if needed */ ++ if (buffer && buflen) { ++ /* if it's an INTERROGATE command, just pass the length ++ * of parameters to read, as data */ ++#if CMD_DISCOVERY ++ if (cmd == ACX1xx_CMD_INTERROGATE) ++ memset_io(adev->cmd_area + 4, 0xAA, buflen); ++#endif ++ /* ++ * slave memory version ++ */ ++ copy_to_slavemem (adev, (u32) (adev->cmd_area + 4), buffer, ++ (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen); ++ } ++ /* now write the actual command type */ ++ acxmem_write_cmd_type_status(adev, cmd, 0); ++ ++ /* clear CMD_COMPLETE bit. can be set only by IRQ handler: */ ++ adev->irq_status &= ~HOST_INT_CMD_COMPLETE; ++ ++ /* execute command */ ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD); ++ write_flush(adev); ++ ++ /* wait for firmware to process command */ ++ ++ /* Ensure nonzero and not too large timeout. ++ ** Also converts e.g. 100->99, 200->199 ++ ** which is nice but not essential */ ++ cmd_timeout = (cmd_timeout-1) | 1; ++ if (unlikely(cmd_timeout > 1199)) ++ cmd_timeout = 1199; ++ ++ /* we schedule away sometimes (timeout can be large) */ ++ counter = cmd_timeout; ++ timeout = jiffies + cmd_timeout * HZ / 1000; ++ do { ++ if (!adev->irqs_active) { /* IRQ disabled: poll */ ++ irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); ++ if (irqtype & HOST_INT_CMD_COMPLETE) { ++ write_reg16(adev, IO_ACX_IRQ_ACK, ++ HOST_INT_CMD_COMPLETE); ++ break; ++ } ++ } else { /* Wait when IRQ will set the bit */ ++ irqtype = adev->irq_status; ++ if (irqtype & HOST_INT_CMD_COMPLETE) ++ break; ++ } ++ ++ if (counter % 8 == 0) { ++ if (time_after(jiffies, timeout)) { ++ counter = 0; ++ break; ++ } ++ /* we waited 8 iterations, no luck. Sleep 8 ms */ ++ acx_s_msleep(8); ++ } ++ } while (likely(--counter)); ++ ++ /* save state for debugging */ ++ cmd_status = acxmem_read_cmd_type_status(adev); ++ ++ /* put the card in IDLE state */ ++ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); ++ ++ if (!counter) { /* timed out! */ ++ printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. " ++ "irq bits:0x%04X irq_status:0x%04X timeout:%dms " ++ "cmd_status:%d (%s)\n", ++ devname, (adev->irqs_active) ? "waiting" : "polling", ++ irqtype, adev->irq_status, cmd_timeout, ++ cmd_status, acx_cmd_status_str(cmd_status)); ++ printk("%s: "FUNC"(): device irq status 0x%04x\n", ++ devname, read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES)); ++ printk("%s: "FUNC"(): IO_ACX_IRQ_MASK 0x%04x IO_ACX_FEMR 0x%04x\n", ++ devname, ++ read_reg16 (adev, IO_ACX_IRQ_MASK), ++ read_reg16 (adev, IO_ACX_FEMR)); ++ if (read_reg16 (adev, IO_ACX_IRQ_MASK) == 0xffff) { ++ printk ("acxmem: firmware probably hosed - reloading\n"); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) ++ { ++ pm_message_t state; ++ /* acxmem_e_suspend (resume_pdev, state); */ ++ acxmem_e_suspend (adev->ndev , state); ++ } ++#else ++ acxmem_e_suspend (adev, 0); ++#endif ++ { ++ resume_ndev = adev->ndev; ++ fw_resumer (NULL); ++ } ++ } ++ ++ goto bad; ++ } else if (cmd_timeout - counter > 30) { /* if waited >30ms... */ ++ log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. " ++ "count:%d. Please report\n", ++ (adev->irqs_active) ? "waited" : "polled", ++ cmd_timeout - counter, counter); ++ } ++ ++ if (1 != cmd_status) { /* it is not a 'Success' */ ++ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). " ++ "Took %dms of %d\n", ++ devname, cmd_status, acx_cmd_status_str(cmd_status), ++ cmd_timeout - counter, cmd_timeout); ++ /* zero out result buffer ++ * WARNING: this will trash stack in case of illegally large input ++ * length! */ ++ if (buflen > 388) { ++ /* ++ * 388 is maximum command length ++ */ ++ printk ("invalid length 0x%08x\n", buflen); ++ buflen = 388; ++ } ++ p = (u8 *) buffer; ++ for (i = 0; i < buflen; i+= 16) { ++ printk ("%04x:", i); ++ for (j = 0; (j < 16) && (i+j < buflen); j++) { ++ printk (" %02x", *p++); ++ } ++ printk ("\n"); ++ } ++ if (buffer && buflen) ++ memset(buffer, 0, buflen); ++ goto bad; ++ } ++ ++ /* read in result parameters if needed */ ++ if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) { ++ copy_from_slavemem (adev, buffer, (u32) (adev->cmd_area + 4), buflen); ++ if (acx_debug & L_DEBUG) { ++ printk("output buffer (len=%u): ", buflen); ++ acx_dump_bytes(buffer, buflen); ++ } ++ } ++ ++/* ok: */ ++ log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n", ++ cmdstr, jiffies - start); ++ FN_EXIT1(OK); ++ return OK; ++ ++bad: ++ /* Give enough info so that callers can avoid ++ ** printing their own diagnostic messages */ ++#if ACX_DEBUG ++ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); ++#else ++ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); ++#endif ++ dump_stack(); ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++#if defined(NONESSENTIAL_FEATURES) ++typedef struct device_id { ++ unsigned char id[6]; ++ char *descr; ++ char *type; ++} device_id_t; ++ ++static const device_id_t ++device_ids[] = ++{ ++ { ++ {'G', 'l', 'o', 'b', 'a', 'l'}, ++ NULL, ++ NULL, ++ }, ++ { ++ {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, ++ "uninitialized", ++ "SpeedStream SS1021 or Gigafast WF721-AEX" ++ }, ++ { ++ {0x80, 0x81, 0x82, 0x83, 0x84, 0x85}, ++ "non-standard", ++ "DrayTek Vigor 520" ++ }, ++ { ++ {'?', '?', '?', '?', '?', '?'}, ++ "non-standard", ++ "Level One WPC-0200" ++ }, ++ { ++ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, ++ "empty", ++ "DWL-650+ variant" ++ } ++}; ++ ++static void ++acx_show_card_eeprom_id(acx_device_t *adev) ++{ ++ unsigned char buffer[CARD_EEPROM_ID_SIZE]; ++ int i; ++ ++ memset(&buffer, 0, CARD_EEPROM_ID_SIZE); ++ /* use direct EEPROM access */ ++ for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) { ++ if (OK != acxmem_read_eeprom_byte(adev, ++ ACX100_EEPROM_ID_OFFSET + i, ++ &buffer[i])) { ++ printk("acx: reading EEPROM FAILED\n"); ++ break; ++ } ++ } ++ ++ for (i = 0; i < VEC_SIZE(device_ids); i++) { ++ if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) { ++ if (device_ids[i].descr) { ++ printk("acx: EEPROM card ID string check " ++ "found %s card ID: is this %s?\n", ++ device_ids[i].descr, device_ids[i].type); ++ } ++ break; ++ } ++ } ++ if (i == VEC_SIZE(device_ids)) { ++ printk("acx: EEPROM card ID string check found " ++ "unknown card: expected 'Global', got '%.*s\'. " ++ "Please report\n", CARD_EEPROM_ID_SIZE, buffer); ++ } ++} ++#endif /* NONESSENTIAL_FEATURES */ ++ ++/*********************************************************************** ++** acxmem_free_desc_queues ++** ++** Releases the queues that have been allocated, the ++** others have been initialised to NULL so this ++** function can be used if only part of the queues were allocated. ++*/ ++ ++void ++acxmem_free_desc_queues(acx_device_t *adev) ++{ ++#define ACX_FREE_QUEUE(size, ptr, phyaddr) \ ++ if (ptr) { \ ++ kfree(ptr); \ ++ ptr = NULL; \ ++ size = 0; \ ++ } ++ ++ FN_ENTER; ++ ++ ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy); ++ ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy); ++ ++ adev->txdesc_start = NULL; ++ ++ ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy); ++ ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy); ++ ++ adev->rxdesc_start = NULL; ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_delete_dma_regions ++*/ ++static void ++acxmem_s_delete_dma_regions(acx_device_t *adev) ++{ ++ unsigned long flags; ++ ++ FN_ENTER; ++ /* disable radio Tx/Rx. Shouldn't we use the firmware commands ++ * here instead? Or are we that much down the road that it's no ++ * longer possible here? */ ++ /* ++ * slave memory interface really doesn't like this. ++ */ ++ /* ++ write_reg16(adev, IO_ACX_ENABLE, 0); ++ */ ++ ++ acx_s_msleep(100); ++ ++ acx_lock(adev, flags); ++ acxmem_free_desc_queues(adev); ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_e_probe ++** ++** Probe routine called when a PCI device w/ matching ID is found. ++** Here's the sequence: ++** - Allocate the PCI resources. ++** - Read the PCMCIA attribute memory to make sure we have a WLAN card ++** - Reset the MAC ++** - Initialize the dev and wlan data ++** - Initialize the MAC ++** ++** pdev - ptr to pci device structure containing info about pci configuration ++** id - ptr to the device id entry that matched this device ++*/ ++static const u16 ++IO_ACX100[] = ++{ ++ 0x0000, /* IO_ACX_SOFT_RESET */ ++ ++ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ ++ 0x0018, /* IO_ACX_SLV_MEM_DATA */ ++ 0x001c, /* IO_ACX_SLV_MEM_CTL */ ++ 0x0020, /* IO_ACX_SLV_END_CTL */ ++ ++ 0x0034, /* IO_ACX_FEMR */ ++ ++ 0x007c, /* IO_ACX_INT_TRIG */ ++ 0x0098, /* IO_ACX_IRQ_MASK */ ++ 0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */ ++ 0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */ ++ 0x00ac, /* IO_ACX_IRQ_ACK */ ++ 0x00b0, /* IO_ACX_HINT_TRIG */ ++ ++ 0x0104, /* IO_ACX_ENABLE */ ++ ++ 0x0250, /* IO_ACX_EEPROM_CTL */ ++ 0x0254, /* IO_ACX_EEPROM_ADDR */ ++ 0x0258, /* IO_ACX_EEPROM_DATA */ ++ 0x025c, /* IO_ACX_EEPROM_CFG */ ++ ++ 0x0268, /* IO_ACX_PHY_ADDR */ ++ 0x026c, /* IO_ACX_PHY_DATA */ ++ 0x0270, /* IO_ACX_PHY_CTL */ ++ ++ 0x0290, /* IO_ACX_GPIO_OE */ ++ ++ 0x0298, /* IO_ACX_GPIO_OUT */ ++ ++ 0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */ ++ 0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */ ++ 0x02ac, /* IO_ACX_EEPROM_INFORMATION */ ++ ++ 0x02d0, /* IO_ACX_EE_START */ ++ 0x02d4, /* IO_ACX_SOR_CFG */ ++ 0x02d8 /* IO_ACX_ECPU_CTRL */ ++}; ++ ++static const u16 ++IO_ACX111[] = ++{ ++ 0x0000, /* IO_ACX_SOFT_RESET */ ++ ++ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ ++ 0x0018, /* IO_ACX_SLV_MEM_DATA */ ++ 0x001c, /* IO_ACX_SLV_MEM_CTL */ ++ 0x0020, /* IO_ACX_SLV_MEM_CP */ ++ ++ 0x0034, /* IO_ACX_FEMR */ ++ ++ 0x00b4, /* IO_ACX_INT_TRIG */ ++ 0x00d4, /* IO_ACX_IRQ_MASK */ ++ /* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */ ++ 0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */ ++ 0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */ ++ 0x00e8, /* IO_ACX_IRQ_ACK */ ++ 0x00ec, /* IO_ACX_HINT_TRIG */ ++ ++ 0x01d0, /* IO_ACX_ENABLE */ ++ ++ 0x0338, /* IO_ACX_EEPROM_CTL */ ++ 0x033c, /* IO_ACX_EEPROM_ADDR */ ++ 0x0340, /* IO_ACX_EEPROM_DATA */ ++ 0x0344, /* IO_ACX_EEPROM_CFG */ ++ ++ 0x0350, /* IO_ACX_PHY_ADDR */ ++ 0x0354, /* IO_ACX_PHY_DATA */ ++ 0x0358, /* IO_ACX_PHY_CTL */ ++ ++ 0x0374, /* IO_ACX_GPIO_OE */ ++ ++ 0x037c, /* IO_ACX_GPIO_OUT */ ++ ++ 0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */ ++ 0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */ ++ 0x0390, /* IO_ACX_EEPROM_INFORMATION */ ++ ++ 0x0100, /* IO_ACX_EE_START */ ++ 0x0104, /* IO_ACX_SOR_CFG */ ++ 0x0108, /* IO_ACX_ECPU_CTRL */ ++}; ++ ++static void ++dummy_netdev_init(struct net_device *ndev) {} ++ ++/* ++ * Most of the acx specific pieces of hardware reset. ++ */ ++static int ++acxmem_complete_hw_reset (acx_device_t *adev) ++{ ++ acx111_ie_configoption_t co; ++ ++ /* NB: read_reg() reads may return bogus data before reset_dev(), ++ * since the firmware which directly controls large parts of the I/O ++ * registers isn't initialized yet. ++ * acx100 seems to be more affected than acx111 */ ++ if (OK != acxmem_s_reset_dev (adev)) ++ return -1; ++ ++ if (IS_ACX100(adev)) { ++ /* ACX100: configopt struct in cmd mailbox - directly after reset */ ++ copy_from_slavemem (adev, (u8*) &co, (u32) adev->cmd_area, sizeof (co)); ++ } ++ ++ if (OK != acx_s_init_mac(adev)) ++ return -3; ++ ++ if (IS_ACX111(adev)) { ++ /* ACX111: configopt struct needs to be queried after full init */ ++ acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS); ++ } ++ ++ /* ++ * Set up transmit buffer administration ++ */ ++ init_acx_txbuf (adev); ++ ++ /* ++ * Windows driver writes 0x01000000 to register 0x288, RADIO_CTL, if the form factor ++ * is 3. It also write protects the EEPROM by writing 1<<9 to GPIO_OUT ++ */ ++ if (adev->form_factor == 3) { ++ set_regbits (adev, 0x288, 0x01000000); ++ set_regbits (adev, 0x298, 1<<9); ++ } ++ ++/* TODO: merge them into one function, they are called just once and are the same for pci & usb */ ++ if (OK != acxmem_read_eeprom_byte(adev, 0x05, &adev->eeprom_version)) ++ return -2; ++ ++ acx_s_parse_configoption(adev, &co); ++ acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */ ++ acx_display_hardware_details(adev); ++ ++ return 0; ++} ++ ++static int acx_init_netdev(struct net_device *ndev, struct device *dev, int base_addr, int addr_size, int irq) ++{ ++ const char *chip_name; ++ int result = -EIO; ++ int err; ++ u8 chip_type; ++ acx_device_t *adev = NULL; ++ ++ FN_ENTER; ++ ++ /* FIXME: prism54 calls pci_set_mwi() here, ++ * should we do/support the same? */ ++ ++ /* chiptype is u8 but id->driver_data is ulong ++ ** Works for now (possible values are 1 and 2) */ ++ chip_type = CHIPTYPE_ACX100; ++ /* acx100 and acx111 have different PCI memory regions */ ++ if (chip_type == CHIPTYPE_ACX100) { ++ chip_name = "ACX100"; ++ } else if (chip_type == CHIPTYPE_ACX111) { ++ chip_name = "ACX111"; ++ } else { ++ printk("acx: unknown chip type 0x%04X\n", chip_type); ++ goto fail_unknown_chiptype; ++ } ++ ++ printk("acx: found %s-based wireless network card\n", chip_name); ++ log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug); ++ ++ ++ dev_set_drvdata(dev, ndev); ++ ++ ether_setup(ndev); ++ ++ ndev->irq = irq; ++ ++ ndev->base_addr = base_addr; ++printk (KERN_INFO "memwinbase=%lx memwinsize=%u\n",memwin.Base,memwin.Size); ++ if (addr_size == 0 || ndev->irq == 0) ++ goto fail_hw_params; ++ ndev->open = &acxmem_e_open; ++ ndev->stop = &acxmem_e_close; ++ //pdev->dev.release = &acxmem_e_release; ++ ndev->hard_start_xmit = &acx_i_start_xmit; ++ ndev->get_stats = &acx_e_get_stats; ++#if IW_HANDLER_VERSION <= 5 ++ ndev->get_wireless_stats = &acx_e_get_wireless_stats; ++#endif ++ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; ++ ndev->set_multicast_list = &acxmem_i_set_multicast_list; ++ ndev->tx_timeout = &acxmem_i_tx_timeout; ++ ndev->change_mtu = &acx_e_change_mtu; ++ ndev->watchdog_timeo = 4 * HZ; ++ ++ adev = ndev2adev(ndev); ++ spin_lock_init(&adev->lock); /* initial state: unlocked */ ++ spin_lock_init(&adev->txbuf_lock); ++ /* We do not start with downed sem: we want PARANOID_LOCKING to work */ ++ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ ++ /* since nobody can see new netdev yet, we can as well ++ ** just _presume_ that we're under sem (instead of actually taking it): */ ++ /* acx_sem_lock(adev); */ ++ adev->dev = dev; ++ adev->ndev = ndev; ++ adev->dev_type = DEVTYPE_MEM; ++ adev->chip_type = chip_type; ++ adev->chip_name = chip_name; ++ adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111; ++ adev->membase = (volatile u32 *) ndev->base_addr; ++ adev->iobase = (volatile u32 *) ioremap_nocache (ndev->base_addr, addr_size); ++ /* to find crashes due to weird driver access ++ * to unconfigured interface (ifup) */ ++ adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead; ++ ++#if defined(NONESSENTIAL_FEATURES) ++ acx_show_card_eeprom_id(adev); ++#endif /* NONESSENTIAL_FEATURES */ ++ ++#ifdef SET_MODULE_OWNER ++ SET_MODULE_OWNER(ndev); ++#endif ++ // need to fix that @@ ++ SET_NETDEV_DEV(ndev, dev); ++ ++ log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq); ++ ++ /* ok, pci setup is finished, now start initializing the card */ ++ ++ if (OK != acxmem_complete_hw_reset (adev)) ++ goto fail_reset; ++ ++ /* ++ * Set up default things for most of the card settings. ++ */ ++ acx_s_set_defaults(adev); ++ ++ /* Register the card, AFTER everything else has been set up, ++ * since otherwise an ioctl could step on our feet due to ++ * firmware operations happening in parallel or uninitialized data */ ++ err = register_netdev(ndev); ++ if (OK != err) { ++ printk("acx: register_netdev() FAILED: %d\n", err); ++ goto fail_register_netdev; ++ } ++ ++ acx_proc_register_entries(ndev); ++ ++ /* Now we have our device, so make sure the kernel doesn't try ++ * to send packets even though we're not associated to a network yet */ ++ acx_stop_queue(ndev, "on probe"); ++ acx_carrier_off(ndev, "on probe"); ++ ++ /* ++ * Set up a default monitor type so that poor combinations of initialization ++ * sequences in monitor mode don't end up destroying the hardware type. ++ */ ++ adev->monitor_type = ARPHRD_ETHER; ++ ++ /* ++ * Register to receive inetaddr notifier changes. This will allow us to ++ * catch if the user changes the MAC address of the interface. ++ */ ++ register_netdevice_notifier(&acx_netdev_notifier); ++ ++ /* after register_netdev() userspace may start working with dev ++ * (in particular, on other CPUs), we only need to up the sem */ ++ /* acx_sem_unlock(adev); */ ++ ++ printk("acx "ACX_RELEASE": net device %s, driver compiled " ++ "against wireless extensions %d and Linux %s\n", ++ ndev->name, WIRELESS_EXT, UTS_RELEASE); ++ ++#if CMD_DISCOVERY ++ great_inquisitor(adev); ++#endif ++ ++ result = OK; ++ goto done; ++ ++ /* error paths: undo everything in reverse order... */ ++ ++fail_register_netdev: ++ ++ acxmem_s_delete_dma_regions(adev); ++ ++fail_reset: ++fail_hw_params: ++ free_netdev(ndev); ++fail_unknown_chiptype: ++ ++ ++done: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxmem_e_remove ++** ++** Shut device down (if not hot unplugged) ++** and deallocate PCI resources for the acx chip. ++** ++** pdev - ptr to PCI device structure containing info about pci configuration ++*/ ++static int __devexit ++acxmem_e_remove(struct pcmcia_device *link) ++{ ++ struct net_device *ndev; ++ acx_device_t *adev; ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ ndev = ((local_info_t*)link->priv)->ndev; ++ if (!ndev) { ++ log(L_DEBUG, "%s: card is unused. Skipping any release code\n", ++ __func__); ++ goto end; ++ } ++ ++ adev = ndev2adev(ndev); ++ ++ /* If device wasn't hot unplugged... */ ++ if (adev_present(adev)) { ++ ++ acx_sem_lock(adev); ++ ++ /* disable both Tx and Rx to shut radio down properly */ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); ++ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); ++ ++#ifdef REDUNDANT ++ /* put the eCPU to sleep to save power ++ * Halting is not possible currently, ++ * since not supported by all firmware versions */ ++ acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0); ++#endif ++ acx_lock(adev, flags); ++ ++ /* disable power LED to save power :-) */ ++ log(L_INIT, "switching off power LED to save power\n"); ++ acxmem_l_power_led(adev, 0); ++ ++ /* stop our eCPU */ ++ if (IS_ACX111(adev)) { ++ /* FIXME: does this actually keep halting the eCPU? ++ * I don't think so... ++ */ ++ acxmem_l_reset_mac(adev); ++ } else { ++ u16 temp; ++ ++ /* halt eCPU */ ++ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; ++ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); ++ write_flush(adev); ++ } ++ ++ acx_unlock(adev, flags); ++ ++ acx_sem_unlock(adev); ++ } ++ ++ ++ /* ++ * Unregister the notifier chain ++ */ ++ unregister_netdevice_notifier(&acx_netdev_notifier); ++ ++ /* unregister the device to not let the kernel ++ * (e.g. ioctls) access a half-deconfigured device ++ * NB: this will cause acxmem_e_close() to be called, ++ * thus we shouldn't call it under sem! */ ++ log(L_INIT, "removing device %s\n", ndev->name); ++ unregister_netdev(ndev); ++ ++ /* unregister_netdev ensures that no references to us left. ++ * For paranoid reasons we continue to follow the rules */ ++ acx_sem_lock(adev); ++ ++ if (adev->dev_state_mask & ACX_STATE_IFACE_UP) { ++ acxmem_s_down(ndev); ++ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ } ++ ++ acx_proc_unregister_entries(ndev); ++ ++ acxmem_s_delete_dma_regions(adev); ++ ++ /* finally, clean up PCI bus state */ ++ if (adev->iobase) iounmap((void *)adev->iobase); ++ ++ acx_sem_unlock(adev); ++ ++ /* Free netdev (quite late, ++ * since otherwise we might get caught off-guard ++ * by a netdev timeout handler execution ++ * expecting to see a working dev...) */ ++ free_netdev(ndev); ++ ++ printk ("e_remove done\n"); ++end: ++ FN_EXIT0; ++ ++ return 0; ++} ++ ++ ++/*********************************************************************** ++** TODO: PM code needs to be fixed / debugged / tested. ++*/ ++#ifdef CONFIG_PM ++static int ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) ++acxmem_e_suspend( struct net_device *ndev, pm_message_t state) ++#else ++acxmem_e_suspend( struct net_device *ndev, u32 state) ++#endif ++{ ++ FN_ENTER; ++ acx_device_t *adev; ++ printk("acx: suspend handler is experimental!\n"); ++ printk("sus: dev %p\n", ndev); ++ ++ if (!netif_running(ndev)) ++ goto end; ++ // @@ need to get it from link or something like that ++ adev = ndev2adev(ndev); ++ printk("sus: adev %p\n", adev); ++ ++ acx_sem_lock(adev); ++ ++ netif_device_detach(adev->ndev); /* this one cannot sleep */ ++ acxmem_s_down(adev->ndev); ++ /* down() does not set it to 0xffff, but here we really want that */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); ++ write_reg16(adev, IO_ACX_FEMR, 0x0); ++ acxmem_s_delete_dma_regions(adev); ++ ++ /* ++ * Turn the ACX chip off. ++ */ ++ ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT0; ++ return OK; ++} ++ ++ ++static void ++fw_resumer(struct work_struct *notused) ++{ ++ acx_device_t *adev; ++ struct net_device *ndev = resume_ndev; ++ ++ printk("acx: resume handler is experimental!\n"); ++ printk("rsm: got dev %p\n", ndev); ++ ++ if (!netif_running(ndev)) ++ return; ++ ++ adev = ndev2adev(ndev); ++ printk("rsm: got adev %p\n", adev); ++ ++ acx_sem_lock(adev); ++ ++ /* ++ * Turn on the ACX. ++ */ ++ ++ acxmem_complete_hw_reset (adev); ++ ++ /* ++ * done by acx_s_set_defaults for initial startup ++ */ ++ acxmem_set_interrupt_mask(adev); ++ ++ printk ("rsm: bringing up interface\n"); ++ SET_BIT (adev->set_mask, GETSET_ALL); ++ acxmem_s_up(ndev); ++ printk("rsm: acx up done\n"); ++ ++ /* now even reload all card parameters as they were before suspend, ++ * and possibly be back in the network again already :-) ++ */ ++ /* - most settings updated in acxmem_s_up() ++ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) { ++ adev->set_mask = GETSET_ALL; ++ acx_s_update_card_settings(adev); ++ printk("rsm: settings updated\n"); ++ } ++ */ ++ netif_device_attach(ndev); ++ printk("rsm: device attached\n"); ++ ++ acx_sem_unlock(adev); ++} ++ ++DECLARE_WORK( fw_resume_work, fw_resumer ); ++ ++static int ++acxmem_e_resume(struct pcmcia_device *link) ++{ ++ FN_ENTER; ++ ++ //resume_pdev = pdev; ++ schedule_work( &fw_resume_work ); ++ ++ FN_EXIT0; ++ return OK; ++} ++#endif /* CONFIG_PM */ ++ ++ ++/*********************************************************************** ++** acxmem_s_up ++** ++** This function is called by acxmem_e_open (when ifconfig sets the device as up) ++** ++** Side effects: ++** - Enables on-card interrupt requests ++** - calls acx_s_start ++*/ ++ ++static void ++enable_acx_irq(acx_device_t *adev) ++{ ++ FN_ENTER; ++ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask); ++ write_reg16(adev, IO_ACX_FEMR, 0x8000); ++ adev->irqs_active = 1; ++ FN_EXIT0; ++} ++ ++static void ++acxmem_s_up(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ enable_acx_irq(adev); ++ acx_unlock(adev, flags); ++ ++ /* acx fw < 1.9.3.e has a hardware timer, and older drivers ++ ** used to use it. But we don't do that anymore, our OS ++ ** has reliable software timers */ ++ init_timer(&adev->mgmt_timer); ++ adev->mgmt_timer.function = acx_i_timer; ++ adev->mgmt_timer.data = (unsigned long)adev; ++ ++ /* Need to set ACX_STATE_IFACE_UP first, or else ++ ** timer won't be started by acx_set_status() */ ++ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_2_STA: ++ /* actual scan cmd will happen in start() */ ++ acx_set_status(adev, ACX_STATUS_1_SCANNING); break; ++ case ACX_MODE_3_AP: ++ case ACX_MODE_MONITOR: ++ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break; ++ } ++ ++ acx_s_start(adev); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_down ++** ++** This disables the netdevice ++** ++** Side effects: ++** - disables on-card interrupt request ++*/ ++ ++static void ++disable_acx_irq(acx_device_t *adev) ++{ ++ FN_ENTER; ++ ++ /* I guess mask is not 0xffff because acx100 won't signal ++ ** cmd completion then (needed for ifup). ++ ** Someone with acx100 please confirm */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off); ++ write_reg16(adev, IO_ACX_FEMR, 0x0); ++ adev->irqs_active = 0; ++ FN_EXIT0; ++} ++ ++static void ++acxmem_s_down(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ /* Disable IRQs first, so that IRQs cannot race with us */ ++ /* then wait until interrupts have finished executing on other CPUs */ ++ acx_lock(adev, flags); ++ disable_acx_irq(adev); ++ synchronize_irq(adev->pdev->irq); ++ acx_unlock(adev, flags); ++ ++ /* we really don't want to have an asynchronous tasklet disturb us ++ ** after something vital for its job has been shut down, so ++ ** end all remaining work now. ++ ** ++ ** NB: carrier_off (done by set_status below) would lead to ++ ** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK(). ++ ** That's why we do FLUSH first. ++ ** ++ ** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK() ++ ** waits for acx_e_after_interrupt_task to complete if it is running ++ ** on another CPU, but acx_e_after_interrupt_task ++ ** will sleep on sem forever, because it is taken by us! ++ ** Work around that by temporary sem unlock. ++ ** This will fail miserably if we'll be hit by concurrent ++ ** iwconfig or something in between. TODO! */ ++ acx_sem_unlock(adev); ++ FLUSH_SCHEDULED_WORK(); ++ acx_sem_lock(adev); ++ ++ /* This is possible: ++ ** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task -> ++ ** -> set_status(ASSOCIATED) -> wake_queue() ++ ** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK ++ ** lock/unlock is just paranoia, maybe not needed */ ++ acx_lock(adev, flags); ++ acx_stop_queue(ndev, "on ifdown"); ++ acx_set_status(adev, ACX_STATUS_0_STOPPED); ++ acx_unlock(adev, flags); ++ ++ /* kernel/timer.c says it's illegal to del_timer_sync() ++ ** a timer which restarts itself. We guarantee this cannot ++ ** ever happen because acx_i_timer() never does this if ++ ** status is ACX_STATUS_0_STOPPED */ ++ del_timer_sync(&adev->mgmt_timer); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_e_open ++** ++** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP ++** from clear to set. In other words: ifconfig up. ++** ++** Returns: ++** 0 success ++** >0 f/w reported error ++** <0 driver reported error ++*/ ++static int ++acxmem_e_open(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result = OK; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ acx_init_task_scheduler(adev); ++ ++/* TODO: pci_set_power_state(pdev, PCI_D0); ? */ ++ ++#if 0 ++ /* request shared IRQ handler */ ++ if (request_irq(ndev->irq, acxmem_i_interrupt, SA_INTERRUPT, ndev->name, ndev)) { ++ printk("%s: request_irq FAILED\n", ndev->name); ++ result = -EAGAIN; ++ goto done; ++ } ++ set_irq_type (ndev->irq, IRQT_FALLING); ++ log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq); ++#endif ++ ++ /* ifup device */ ++ acxmem_s_up(ndev); ++ ++ /* We don't currently have to do anything else. ++ * The setup of the MAC should be subsequently completed via ++ * the mlme commands. ++ * Higher layers know we're ready from dev->start==1 and ++ * dev->tbusy==0. Our rx path knows to pass up received/ ++ * frames because of dev->flags&IFF_UP is true. ++ */ ++done: ++ acx_sem_unlock(adev); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxmem_e_close ++** ++** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP ++** from set to clear. I.e. called by "ifconfig DEV down" ++** ++** Returns: ++** 0 success ++** >0 f/w reported error ++** <0 driver reported error ++*/ ++static int ++acxmem_e_close(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ /* ifdown device */ ++ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ if (netif_device_present(ndev)) { ++ acxmem_s_down(ndev); ++ } ++ ++ /* disable all IRQs, release shared IRQ handler */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); ++ write_reg16(adev, IO_ACX_FEMR, 0x0); ++ free_irq(ndev->irq, ndev); ++ ++/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */ ++ ++ /* We currently don't have to do anything else. ++ * Higher layers know we're not ready from dev->start==0 and ++ * dev->tbusy==1. Our rx path knows to not pass up received ++ * frames because of dev->flags&IFF_UP is false. ++ */ ++ acx_sem_unlock(adev); ++ ++ log(L_INIT, "closed device\n"); ++ FN_EXIT0; ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acxmem_i_tx_timeout ++** ++** Called from network core. Must not sleep! ++*/ ++static void ++acxmem_i_tx_timeout(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ unsigned int tx_num_cleaned; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ ++ /* clean processed tx descs, they may have been completely full */ ++ tx_num_cleaned = acxmem_l_clean_txdesc(adev); ++ ++ /* nothing cleaned, yet (almost) no free buffers available? ++ * --> clean all tx descs, no matter which status!! ++ * Note that I strongly suspect that doing emergency cleaning ++ * may confuse the firmware. This is a last ditch effort to get ++ * ANYTHING to work again... ++ * ++ * TODO: it's best to simply reset & reinit hw from scratch... ++ */ ++ if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) { ++ printk("%s: FAILED to free any of the many full tx buffers. " ++ "Switching to emergency freeing. " ++ "Please report!\n", ndev->name); ++ acxmem_l_clean_txdesc_emergency(adev); ++ } ++ ++ if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status)) ++ acx_wake_queue(ndev, "after tx timeout"); ++ ++ /* stall may have happened due to radio drift, so recalib radio */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); ++ ++ /* do unimportant work last */ ++ printk("%s: tx timeout!\n", ndev->name); ++ adev->stats.tx_errors++; ++ ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_i_set_multicast_list ++** FIXME: most likely needs refinement ++*/ ++static void ++acxmem_i_set_multicast_list(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ ++ /* firmwares don't have allmulti capability, ++ * so just use promiscuous mode instead in this case. */ ++ if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) { ++ SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); ++ CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); ++ SET_BIT(adev->set_mask, SET_RXCONFIG); ++ /* let kernel know in case *we* needed to set promiscuous */ ++ ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI); ++ } else { ++ CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); ++ SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); ++ SET_BIT(adev->set_mask, SET_RXCONFIG); ++ ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI); ++ } ++ ++ /* cannot update card settings directly here, atomic context */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); ++ ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++ ++ ++/*************************************************************** ++** acxmem_l_process_rxdesc ++** ++** Called directly and only from the IRQ handler ++*/ ++ ++#if !ACX_DEBUG ++static inline void log_rxbuffer(const acx_device_t *adev) {} ++#else ++static void ++log_rxbuffer(const acx_device_t *adev) ++{ ++ register const struct rxhostdesc *rxhostdesc; ++ int i; ++ /* no FN_ENTER here, we don't want that */ ++ ++ rxhostdesc = adev->rxhostdesc_start; ++ if (unlikely(!rxhostdesc)) return; ++ for (i = 0; i < RX_CNT; i++) { ++ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) ++ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) ++ printk("rx: buf %d full\n", i); ++ rxhostdesc++; ++ } ++} ++#endif ++ ++static void ++acxmem_l_process_rxdesc(acx_device_t *adev) ++{ ++ register rxhostdesc_t *hostdesc; ++ register rxdesc_t *rxdesc; ++ unsigned count, tail; ++ u32 addr; ++ u8 Ctl_8; ++ ++ FN_ENTER; ++ ++ if (unlikely(acx_debug & L_BUFR)) ++ log_rxbuffer(adev); ++ ++ /* First, have a loop to determine the first descriptor that's ++ * full, just in case there's a mismatch between our current ++ * rx_tail and the full descriptor we're supposed to handle. */ ++ tail = adev->rx_tail; ++ count = RX_CNT; ++ while (1) { ++ hostdesc = &adev->rxhostdesc_start[tail]; ++ rxdesc = &adev->rxdesc_start[tail]; ++ /* advance tail regardless of outcome of the below test */ ++ tail = (tail + 1) % RX_CNT; ++ ++ /* ++ * Unlike the PCI interface, where the ACX can write directly to ++ * the host descriptors, on the slave memory interface we have to ++ * pull these. All we really need to do is check the Ctl_8 field ++ * in the rx descriptor on the ACX, which should be 0x11000000 if ++ * we should process it. ++ */ ++ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); ++ if ((Ctl_8 & DESC_CTL_HOSTOWN) && ++ (Ctl_8 & DESC_CTL_ACXDONE)) ++ break; /* found it! */ ++ ++ if (unlikely(!--count)) /* hmm, no luck: all descs empty, bail out */ ++ goto end; ++ } ++ ++ /* now process descriptors, starting with the first we figured out */ ++ while (1) { ++ log(L_BUFR, "rx: tail=%u Ctl_8=%02X\n", tail, Ctl_8); ++ /* ++ * If the ACX has CTL_RECLAIM set on this descriptor there ++ * is no buffer associated; it just wants us to tell it to ++ * reclaim the memory. ++ */ ++ if (!(Ctl_8 & DESC_CTL_RECLAIM)) { ++ ++ /* ++ * slave interface - pull data now ++ */ ++ hostdesc->length = read_slavemem16 (adev, (u32) &(rxdesc->total_length)); ++ ++ /* ++ * hostdesc->data is an rxbuffer_t, which includes header information, ++ * but the length in the data packet doesn't. The header information ++ * takes up an additional 12 bytes, so add that to the length we copy. ++ */ ++ addr = read_slavemem32 (adev, (u32) &(rxdesc->ACXMemPtr)); ++ if (addr) { ++ /* ++ * How can &(rxdesc->ACXMemPtr) above ever be zero? Looks like we ++ * get that now and then - try to trap it for debug. ++ */ ++ if (addr & 0xffff0000) { ++ printk("rxdesc 0x%08x\n", (u32) rxdesc); ++ dump_acxmem (adev, 0, 0x10000); ++ panic ("Bad access!"); ++ } ++ chaincopy_from_slavemem (adev, (u8 *) hostdesc->data, addr, ++ hostdesc->length + ++ (u32) &((rxbuffer_t *)0)->hdr_a3); ++ acx_l_process_rxbuf(adev, hostdesc->data); ++ } ++ } ++ else { ++ printk ("rx reclaim only!\n"); ++ } ++ ++ hostdesc->Status = 0; ++ ++ /* ++ * Let the ACX know we're done. ++ */ ++ CLEAR_BIT (Ctl_8, DESC_CTL_HOSTOWN); ++ SET_BIT (Ctl_8, DESC_CTL_HOSTDONE); ++ SET_BIT (Ctl_8, DESC_CTL_RECLAIM); ++ write_slavemem8 (adev, (u32) &rxdesc->Ctl_8, Ctl_8); ++ ++ /* ++ * Now tell the ACX we've finished with the receive buffer so ++ * it can finish the reclaim. ++ */ ++ write_reg16 (adev, IO_ACX_INT_TRIG, INT_TRIG_RXPRC); ++ ++ /* ok, descriptor is handled, now check the next descriptor */ ++ hostdesc = &adev->rxhostdesc_start[tail]; ++ rxdesc = &adev->rxdesc_start[tail]; ++ ++ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); ++ ++ /* if next descriptor is empty, then bail out */ ++ if (!(Ctl_8 & DESC_CTL_HOSTOWN) || !(Ctl_8 & DESC_CTL_ACXDONE)) ++ break; ++ ++ tail = (tail + 1) % RX_CNT; ++ } ++end: ++ adev->rx_tail = tail; ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_i_interrupt ++** ++** IRQ handler (atomic context, must not sleep, blah, blah) ++*/ ++ ++/* scan is complete. all frames now on the receive queue are valid */ ++#define INFO_SCAN_COMPLETE 0x0001 ++#define INFO_WEP_KEY_NOT_FOUND 0x0002 ++/* hw has been reset as the result of a watchdog timer timeout */ ++#define INFO_WATCH_DOG_RESET 0x0003 ++/* failed to send out NULL frame from PS mode notification to AP */ ++/* recommended action: try entering 802.11 PS mode again */ ++#define INFO_PS_FAIL 0x0004 ++/* encryption/decryption process on a packet failed */ ++#define INFO_IV_ICV_FAILURE 0x0005 ++ ++/* Info mailbox format: ++2 bytes: type ++2 bytes: status ++more bytes may follow ++ rumors say about status: ++ 0x0000 info available (set by hw) ++ 0x0001 information received (must be set by host) ++ 0x1000 info available, mailbox overflowed (messages lost) (set by hw) ++ but in practice we've seen: ++ 0x9000 when we did not set status to 0x0001 on prev message ++ 0x1001 when we did set it ++ 0x0000 was never seen ++ conclusion: this is really a bitfield: ++ 0x1000 is 'info available' bit ++ 'mailbox overflowed' bit is 0x8000, not 0x1000 ++ value of 0x0000 probably means that there are no messages at all ++ P.S. I dunno how in hell hw is supposed to notice that messages are lost - ++ it does NOT clear bit 0x0001, and this bit will probably stay forever set ++ after we set it once. Let's hope this will be fixed in firmware someday ++*/ ++ ++static void ++handle_info_irq(acx_device_t *adev) ++{ ++#if ACX_DEBUG ++ static const char * const info_type_msg[] = { ++ "(unknown)", ++ "scan complete", ++ "WEP key not found", ++ "internal watchdog reset was done", ++ "failed to send powersave (NULL frame) notification to AP", ++ "encrypt/decrypt on a packet has failed", ++ "TKIP tx keys disabled", ++ "TKIP rx keys disabled", ++ "TKIP rx: key ID not found", ++ "???", ++ "???", ++ "???", ++ "???", ++ "???", ++ "???", ++ "???", ++ "TKIP IV value exceeds thresh" ++ }; ++#endif ++ u32 info_type, info_status; ++ ++ info_type = read_slavemem32 (adev, (u32) adev->info_area); ++ ++ info_status = (info_type >> 16); ++ info_type = (u16)info_type; ++ ++ /* inform fw that we have read this info message */ ++ write_slavemem32(adev, (u32) adev->info_area, info_type | 0x00010000); ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK); ++ write_flush(adev); ++ ++ log(L_CTL, "info_type:%04X info_status:%04X\n", ++ info_type, info_status); ++ ++ log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n", ++ info_status, info_type, ++ info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ? ++ 0 : info_type] ++ ); ++} ++ ++ ++static void ++log_unusual_irq(u16 irqtype) { ++ /* ++ if (!printk_ratelimit()) ++ return; ++ */ ++ ++ printk("acx: got"); ++ if (irqtype & HOST_INT_TX_XFER) { ++ printk(" Tx_Xfer"); ++ } ++ if (irqtype & HOST_INT_RX_COMPLETE) { ++ printk(" Rx_Complete"); ++ } ++ if (irqtype & HOST_INT_DTIM) { ++ printk(" DTIM"); ++ } ++ if (irqtype & HOST_INT_BEACON) { ++ printk(" Beacon"); ++ } ++ if (irqtype & HOST_INT_TIMER) { ++ log(L_IRQ, " Timer"); ++ } ++ if (irqtype & HOST_INT_KEY_NOT_FOUND) { ++ printk(" Key_Not_Found"); ++ } ++ if (irqtype & HOST_INT_IV_ICV_FAILURE) { ++ printk(" IV_ICV_Failure (crypto)"); ++ } ++ /* HOST_INT_CMD_COMPLETE */ ++ /* HOST_INT_INFO */ ++ if (irqtype & HOST_INT_OVERFLOW) { ++ printk(" Overflow"); ++ } ++ if (irqtype & HOST_INT_PROCESS_ERROR) { ++ printk(" Process_Error"); ++ } ++ /* HOST_INT_SCAN_COMPLETE */ ++ if (irqtype & HOST_INT_FCS_THRESHOLD) { ++ printk(" FCS_Threshold"); ++ } ++ if (irqtype & HOST_INT_UNKNOWN) { ++ printk(" Unknown"); ++ } ++ printk(" IRQ(s)\n"); ++} ++ ++ ++static void ++update_link_quality_led(acx_device_t *adev) ++{ ++ int qual; ++ ++ qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise); ++ if (qual > adev->brange_max_quality) ++ qual = adev->brange_max_quality; ++ ++ if (time_after(jiffies, adev->brange_time_last_state_change + ++ (HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) { ++ acxmem_l_power_led(adev, (adev->brange_last_state == 0)); ++ adev->brange_last_state ^= 1; /* toggle */ ++ adev->brange_time_last_state_change = jiffies; ++ } ++} ++ ++ ++#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* a la orinoco.c */ ++ ++static irqreturn_t ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) ++acxmem_i_interrupt(int irq, void *dev_id) ++#else ++acxmwm_i_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++#endif ++{ ++ acx_device_t *adev; ++ unsigned long flags; ++ unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY; ++ register u16 irqtype; ++ u16 unmasked; ++ ++ adev = ndev2adev((struct net_device*)dev_id); ++ ++ /* LOCKING: can just spin_lock() since IRQs are disabled anyway. ++ * I am paranoid */ ++ acx_lock(adev, flags); ++ ++ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); ++ if (unlikely(0xffff == unmasked)) { ++ /* 0xffff value hints at missing hardware, ++ * so don't do anything. ++ * Not very clean, but other drivers do the same... */ ++ log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n"); ++ goto none; ++ } ++ ++ /* We will check only "interesting" IRQ types */ ++ irqtype = unmasked & ~adev->irq_mask; ++ if (!irqtype) { ++ /* We are on a shared IRQ line and it wasn't our IRQ */ ++ log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n", ++ unmasked, adev->irq_mask); ++ goto none; ++ } ++ ++ /* Done here because IRQ_NONEs taking three lines of log ++ ** drive me crazy */ ++ FN_ENTER; ++ ++#define IRQ_ITERATE 1 ++#if IRQ_ITERATE ++if (jiffies != adev->irq_last_jiffies) { ++ adev->irq_loops_this_jiffy = 0; ++ adev->irq_last_jiffies = jiffies; ++} ++ ++/* safety condition; we'll normally abort loop below ++ * in case no IRQ type occurred */ ++while (likely(--irqcount)) { ++#endif ++ /* ACK all IRQs ASAP */ ++ write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff); ++ ++ log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n", ++ unmasked, adev->irq_mask, irqtype); ++ ++ /* Handle most important IRQ types first */ ++ if (irqtype & HOST_INT_RX_DATA) { ++ log(L_IRQ, "got Rx_Data IRQ\n"); ++ acxmem_l_process_rxdesc(adev); ++ } ++ if (irqtype & HOST_INT_TX_COMPLETE) { ++ log(L_IRQ, "got Tx_Complete IRQ\n"); ++ /* don't clean up on each Tx complete, wait a bit ++ * unless we're going towards full, in which case ++ * we do it immediately, too (otherwise we might lockup ++ * with a full Tx buffer if we go into ++ * acxmem_l_clean_txdesc() at a time when we won't wakeup ++ * the net queue in there for some reason...) */ ++ if (adev->tx_free <= TX_START_CLEAN) { ++#if TX_CLEANUP_IN_SOFTIRQ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP); ++#else ++ acxmem_l_clean_txdesc(adev); ++#endif ++ } ++ } ++ ++ /* Less frequent ones */ ++ if (irqtype & (0 ++ | HOST_INT_CMD_COMPLETE ++ | HOST_INT_INFO ++ | HOST_INT_SCAN_COMPLETE ++ )) { ++ if (irqtype & HOST_INT_CMD_COMPLETE) { ++ log(L_IRQ, "got Command_Complete IRQ\n"); ++ /* save the state for the running issue_cmd() */ ++ SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE); ++ } ++ if (irqtype & HOST_INT_INFO) { ++ handle_info_irq(adev); ++ } ++ if (irqtype & HOST_INT_SCAN_COMPLETE) { ++ log(L_IRQ, "got Scan_Complete IRQ\n"); ++ /* need to do that in process context */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN); ++ /* remember that fw is not scanning anymore */ ++ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); ++ } ++ } ++ ++ /* These we just log, but either they happen rarely ++ * or we keep them masked out */ ++ if (irqtype & (0 ++ /* | HOST_INT_RX_DATA */ ++ /* | HOST_INT_TX_COMPLETE */ ++ | HOST_INT_TX_XFER ++ | HOST_INT_RX_COMPLETE ++ | HOST_INT_DTIM ++ | HOST_INT_BEACON ++ | HOST_INT_TIMER ++ | HOST_INT_KEY_NOT_FOUND ++ | HOST_INT_IV_ICV_FAILURE ++ /* | HOST_INT_CMD_COMPLETE */ ++ /* | HOST_INT_INFO */ ++ | HOST_INT_OVERFLOW ++ | HOST_INT_PROCESS_ERROR ++ /* | HOST_INT_SCAN_COMPLETE */ ++ | HOST_INT_FCS_THRESHOLD ++ | HOST_INT_UNKNOWN ++ )) { ++ log_unusual_irq(irqtype); ++ } ++ ++#if IRQ_ITERATE ++ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); ++ irqtype = unmasked & ~adev->irq_mask; ++ /* Bail out if no new IRQ bits or if all are masked out */ ++ if (!irqtype) ++ break; ++ ++ if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) { ++ printk(KERN_ERR "acx: too many interrupts per jiffy!\n"); ++ /* Looks like card floods us with IRQs! Try to stop that */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); ++ /* This will short-circuit all future attempts to handle IRQ. ++ * We cant do much more... */ ++ adev->irq_mask = 0; ++ break; ++ } ++} ++#endif ++ /* Routine to perform blink with range */ ++ if (unlikely(adev->led_power == 2)) ++ update_link_quality_led(adev); ++ ++/* handled: */ ++ /* write_flush(adev); - not needed, last op was read anyway */ ++ acx_unlock(adev, flags); ++ FN_EXIT0; ++ return IRQ_HANDLED; ++ ++none: ++ acx_unlock(adev, flags); ++ return IRQ_NONE; ++} ++ ++ ++/*********************************************************************** ++** acxmem_l_power_led ++*/ ++void ++acxmem_l_power_led(acx_device_t *adev, int enable) ++{ ++ u16 gpio_pled = IS_ACX111(adev) ? 0x0040 : 0x0800; ++ ++ /* A hack. Not moving message rate limiting to adev->xxx ++ * (it's only a debug message after all) */ ++ static int rate_limit = 0; ++ ++ if (rate_limit++ < 3) ++ log(L_IOCTL, "Please report in case toggling the power " ++ "LED doesn't work for your card!\n"); ++ if (enable) ++ write_reg16(adev, IO_ACX_GPIO_OUT, ++ read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled); ++ else ++ write_reg16(adev, IO_ACX_GPIO_OUT, ++ read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled); ++} ++ ++ ++/*********************************************************************** ++** Ioctls ++*/ ++ ++/*********************************************************************** ++*/ ++int ++acx111pci_ioctl_info( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ struct iw_param *vwrq, ++ char *extra) ++{ ++#if ACX_DEBUG > 1 ++ acx_device_t *adev = ndev2adev(ndev); ++ rxdesc_t *rxdesc; ++ txdesc_t *txdesc; ++ rxhostdesc_t *rxhostdesc; ++ txhostdesc_t *txhostdesc; ++ struct acx111_ie_memoryconfig memconf; ++ struct acx111_ie_queueconfig queueconf; ++ unsigned long flags; ++ int i; ++ char memmap[0x34]; ++ char rxconfig[0x8]; ++ char fcserror[0x8]; ++ char ratefallback[0x5]; ++ ++ if ( !(acx_debug & (L_IOCTL|L_DEBUG)) ) ++ return OK; ++ /* using printk() since we checked debug flag already */ ++ ++ acx_sem_lock(adev); ++ ++ if (!IS_ACX111(adev)) { ++ printk("acx111-specific function called " ++ "with non-acx111 chip, aborting\n"); ++ goto end_ok; ++ } ++ ++ /* get Acx111 Memory Configuration */ ++ memset(&memconf, 0, sizeof(memconf)); ++ /* BTW, fails with 12 (Write only) error code. ++ ** Retained for easy testing of issue_cmd error handling :) */ ++ printk ("Interrogating queue config\n"); ++ acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG); ++ printk ("done with queue config\n"); ++ ++ /* get Acx111 Queue Configuration */ ++ memset(&queueconf, 0, sizeof(queueconf)); ++ printk ("Interrogating mem config options\n"); ++ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); ++ printk ("done with mem config options\n"); ++ ++ /* get Acx111 Memory Map */ ++ memset(memmap, 0, sizeof(memmap)); ++ printk ("Interrogating mem map\n"); ++ acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP); ++ printk ("done with mem map\n"); ++ ++ /* get Acx111 Rx Config */ ++ memset(rxconfig, 0, sizeof(rxconfig)); ++ printk ("Interrogating rxconfig\n"); ++ acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG); ++ printk ("done with queue rxconfig\n"); ++ ++ /* get Acx111 fcs error count */ ++ memset(fcserror, 0, sizeof(fcserror)); ++ printk ("Interrogating fcs err count\n"); ++ acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT); ++ printk ("done with err count\n"); ++ ++ /* get Acx111 rate fallback */ ++ memset(ratefallback, 0, sizeof(ratefallback)); ++ printk ("Interrogating rate fallback\n"); ++ acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK); ++ printk ("done with rate fallback\n"); ++ ++ /* force occurrence of a beacon interrupt */ ++ /* TODO: comment why is this necessary */ ++ write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON); ++ ++ /* dump Acx111 Mem Configuration */ ++ printk("dump mem config:\n" ++ "data read: %d, struct size: %d\n" ++ "Number of stations: %1X\n" ++ "Memory block size: %1X\n" ++ "tx/rx memory block allocation: %1X\n" ++ "count rx: %X / tx: %X queues\n" ++ "options %1X\n" ++ "fragmentation %1X\n" ++ "Rx Queue 1 Count Descriptors: %X\n" ++ "Rx Queue 1 Host Memory Start: %X\n" ++ "Tx Queue 1 Count Descriptors: %X\n" ++ "Tx Queue 1 Attributes: %X\n", ++ memconf.len, (int) sizeof(memconf), ++ memconf.no_of_stations, ++ memconf.memory_block_size, ++ memconf.tx_rx_memory_block_allocation, ++ memconf.count_rx_queues, memconf.count_tx_queues, ++ memconf.options, ++ memconf.fragmentation, ++ memconf.rx_queue1_count_descs, ++ acx2cpu(memconf.rx_queue1_host_rx_start), ++ memconf.tx_queue1_count_descs, ++ memconf.tx_queue1_attributes); ++ ++ /* dump Acx111 Queue Configuration */ ++ printk("dump queue head:\n" ++ "data read: %d, struct size: %d\n" ++ "tx_memory_block_address (from card): %X\n" ++ "rx_memory_block_address (from card): %X\n" ++ "rx1_queue address (from card): %X\n" ++ "tx1_queue address (from card): %X\n" ++ "tx1_queue attributes (from card): %X\n", ++ queueconf.len, (int) sizeof(queueconf), ++ queueconf.tx_memory_block_address, ++ queueconf.rx_memory_block_address, ++ queueconf.rx1_queue_address, ++ queueconf.tx1_queue_address, ++ queueconf.tx1_attributes); ++ ++ /* dump Acx111 Mem Map */ ++ printk("dump mem map:\n" ++ "data read: %d, struct size: %d\n" ++ "Code start: %X\n" ++ "Code end: %X\n" ++ "WEP default key start: %X\n" ++ "WEP default key end: %X\n" ++ "STA table start: %X\n" ++ "STA table end: %X\n" ++ "Packet template start: %X\n" ++ "Packet template end: %X\n" ++ "Queue memory start: %X\n" ++ "Queue memory end: %X\n" ++ "Packet memory pool start: %X\n" ++ "Packet memory pool end: %X\n" ++ "iobase: %p\n" ++ "iobase2: %p\n", ++ *((u16 *)&memmap[0x02]), (int) sizeof(memmap), ++ *((u32 *)&memmap[0x04]), ++ *((u32 *)&memmap[0x08]), ++ *((u32 *)&memmap[0x0C]), ++ *((u32 *)&memmap[0x10]), ++ *((u32 *)&memmap[0x14]), ++ *((u32 *)&memmap[0x18]), ++ *((u32 *)&memmap[0x1C]), ++ *((u32 *)&memmap[0x20]), ++ *((u32 *)&memmap[0x24]), ++ *((u32 *)&memmap[0x28]), ++ *((u32 *)&memmap[0x2C]), ++ *((u32 *)&memmap[0x30]), ++ adev->iobase, ++ adev->iobase2); ++ ++ /* dump Acx111 Rx Config */ ++ printk("dump rx config:\n" ++ "data read: %d, struct size: %d\n" ++ "rx config: %X\n" ++ "rx filter config: %X\n", ++ *((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig), ++ *((u16 *)&rxconfig[0x04]), ++ *((u16 *)&rxconfig[0x06])); ++ ++ /* dump Acx111 fcs error */ ++ printk("dump fcserror:\n" ++ "data read: %d, struct size: %d\n" ++ "fcserrors: %X\n", ++ *((u16 *)&fcserror[0x02]), (int) sizeof(fcserror), ++ *((u32 *)&fcserror[0x04])); ++ ++ /* dump Acx111 rate fallback */ ++ printk("dump rate fallback:\n" ++ "data read: %d, struct size: %d\n" ++ "ratefallback: %X\n", ++ *((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback), ++ *((u8 *)&ratefallback[0x04])); ++ ++ /* protect against IRQ */ ++ acx_lock(adev, flags); ++ ++ /* dump acx111 internal rx descriptor ring buffer */ ++ rxdesc = adev->rxdesc_start; ++ ++ /* loop over complete receive pool */ ++ if (rxdesc) for (i = 0; i < RX_CNT; i++) { ++ printk("\ndump internal rxdesc %d:\n" ++ "mem pos %p\n" ++ "next 0x%X\n" ++ "acx mem pointer (dynamic) 0x%X\n" ++ "CTL (dynamic) 0x%X\n" ++ "Rate (dynamic) 0x%X\n" ++ "RxStatus (dynamic) 0x%X\n" ++ "Mod/Pre (dynamic) 0x%X\n", ++ i, ++ rxdesc, ++ acx2cpu(rxdesc->pNextDesc), ++ acx2cpu(rxdesc->ACXMemPtr), ++ rxdesc->Ctl_8, ++ rxdesc->rate, ++ rxdesc->error, ++ rxdesc->SNR); ++ rxdesc++; ++ } ++ ++ /* dump host rx descriptor ring buffer */ ++ ++ rxhostdesc = adev->rxhostdesc_start; ++ ++ /* loop over complete receive pool */ ++ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { ++ printk("\ndump host rxdesc %d:\n" ++ "mem pos %p\n" ++ "buffer mem pos 0x%X\n" ++ "buffer mem offset 0x%X\n" ++ "CTL 0x%X\n" ++ "Length 0x%X\n" ++ "next 0x%X\n" ++ "Status 0x%X\n", ++ i, ++ rxhostdesc, ++ acx2cpu(rxhostdesc->data_phy), ++ rxhostdesc->data_offset, ++ le16_to_cpu(rxhostdesc->Ctl_16), ++ le16_to_cpu(rxhostdesc->length), ++ acx2cpu(rxhostdesc->desc_phy_next), ++ rxhostdesc->Status); ++ rxhostdesc++; ++ } ++ ++ /* dump acx111 internal tx descriptor ring buffer */ ++ txdesc = adev->txdesc_start; ++ ++ /* loop over complete transmit pool */ ++ if (txdesc) for (i = 0; i < TX_CNT; i++) { ++ printk("\ndump internal txdesc %d:\n" ++ "size 0x%X\n" ++ "mem pos %p\n" ++ "next 0x%X\n" ++ "acx mem pointer (dynamic) 0x%X\n" ++ "host mem pointer (dynamic) 0x%X\n" ++ "length (dynamic) 0x%X\n" ++ "CTL (dynamic) 0x%X\n" ++ "CTL2 (dynamic) 0x%X\n" ++ "Status (dynamic) 0x%X\n" ++ "Rate (dynamic) 0x%X\n", ++ i, ++ (int) sizeof(struct txdesc), ++ txdesc, ++ acx2cpu(txdesc->pNextDesc), ++ acx2cpu(txdesc->AcxMemPtr), ++ acx2cpu(txdesc->HostMemPtr), ++ le16_to_cpu(txdesc->total_length), ++ txdesc->Ctl_8, ++ txdesc->Ctl2_8, txdesc->error, ++ txdesc->u.r1.rate); ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ ++ /* dump host tx descriptor ring buffer */ ++ ++ txhostdesc = adev->txhostdesc_start; ++ ++ /* loop over complete host send pool */ ++ if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) { ++ printk("\ndump host txdesc %d:\n" ++ "mem pos %p\n" ++ "buffer mem pos 0x%X\n" ++ "buffer mem offset 0x%X\n" ++ "CTL 0x%X\n" ++ "Length 0x%X\n" ++ "next 0x%X\n" ++ "Status 0x%X\n", ++ i, ++ txhostdesc, ++ acx2cpu(txhostdesc->data_phy), ++ txhostdesc->data_offset, ++ le16_to_cpu(txhostdesc->Ctl_16), ++ le16_to_cpu(txhostdesc->length), ++ acx2cpu(txhostdesc->desc_phy_next), ++ le32_to_cpu(txhostdesc->Status)); ++ txhostdesc++; ++ } ++ ++ /* write_reg16(adev, 0xb4, 0x4); */ ++ ++ acx_unlock(adev, flags); ++end_ok: ++ ++ acx_sem_unlock(adev); ++#endif /* ACX_DEBUG */ ++ return OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acx100mem_ioctl_set_phy_amp_bias( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ struct iw_param *vwrq, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ u16 gpio_old; ++ ++ if (!IS_ACX100(adev)) { ++ /* WARNING!!! ++ * Removing this check *might* damage ++ * hardware, since we're tweaking GPIOs here after all!!! ++ * You've been warned... ++ * WARNING!!! */ ++ printk("acx: sorry, setting bias level for non-acx100 " ++ "is not supported yet\n"); ++ return OK; ++ } ++ ++ if (*extra > 7) { ++ printk("acx: invalid bias parameter, range is 0-7\n"); ++ return -EINVAL; ++ } ++ ++ acx_sem_lock(adev); ++ ++ /* Need to lock accesses to [IO_ACX_GPIO_OUT]: ++ * IRQ handler uses it to update LED */ ++ acx_lock(adev, flags); ++ gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT); ++ write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8)); ++ acx_unlock(adev, flags); ++ ++ log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old); ++ printk("%s: PHY power amplifier bias: old:%d, new:%d\n", ++ ndev->name, ++ (gpio_old & 0x0700) >> 8, (unsigned char)*extra); ++ ++ acx_sem_unlock(adev); ++ ++ return OK; ++} ++ ++/*************************************************************** ++** acxmem_l_alloc_tx ++** Actually returns a txdesc_t* ptr ++** ++** FIXME: in case of fragments, should allocate multiple descrs ++** after figuring out how many we need and whether we still have ++** sufficiently many. ++*/ ++tx_t* ++acxmem_l_alloc_tx(acx_device_t *adev) ++{ ++ struct txdesc *txdesc; ++ unsigned head; ++ u8 ctl8; ++ static int txattempts = 0; ++ ++ FN_ENTER; ++ ++ if (unlikely(!adev->tx_free)) { ++ printk("acx: BUG: no free txdesc left\n"); ++ /* ++ * Probably the ACX ignored a transmit attempt and now there's a packet ++ * sitting in the queue we think should be transmitting but the ACX doesn't ++ * know about. ++ * On the first pass, send the ACX a TxProc interrupt to try moving ++ * things along, and if that doesn't work (ie, we get called again) completely ++ * flush the transmit queue. ++ */ ++ if (txattempts < 10) { ++ txattempts++; ++ printk ("acx: trying to wake up ACX\n"); ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); ++ write_flush(adev); } ++ else { ++ txattempts = 0; ++ printk ("acx: flushing transmit queue.\n"); ++ acxmem_l_clean_txdesc_emergency (adev); ++ } ++ txdesc = NULL; ++ goto end; ++ } ++ ++ /* ++ * Make a quick check to see if there is transmit buffer space on ++ * the ACX. This can't guarantee there is enough space for the packet ++ * since we don't yet know how big it is, but it will prevent at least some ++ * annoyances. ++ */ ++ if (!adev->acx_txbuf_blocks_free) { ++ txdesc = NULL; ++ goto end; ++ } ++ ++ head = adev->tx_head; ++ /* ++ * txdesc points to ACX memory ++ */ ++ txdesc = get_txdesc(adev, head); ++ ctl8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); ++ ++ /* ++ * If we don't own the buffer (HOSTOWN) it is certainly not free; however, ++ * we may have previously thought we had enough memory to send ++ * a packet, allocated the buffer then gave up when we found not enough ++ * transmit buffer space on the ACX. In that case, HOSTOWN and ++ * ACXDONE will both be set. ++ */ ++ if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_HOSTOWN))) { ++ /* whoops, descr at current index is not free, so probably ++ * ring buffer already full */ ++ printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find " ++ "free txdesc\n", head, ctl8); ++ txdesc = NULL; ++ goto end; ++ } ++ ++ /* Needed in case txdesc won't be eventually submitted for tx */ ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_ACXDONE_HOSTOWN); ++ ++ adev->tx_free--; ++ log(L_BUFT, "tx: got desc %u, %u remain\n", ++ head, adev->tx_free); ++ /* Keep a few free descs between head and tail of tx ring. ++ ** It is not absolutely needed, just feels safer */ ++ if (adev->tx_free < TX_STOP_QUEUE) { ++ log(L_BUF, "stop queue (%u tx desc left)\n", ++ adev->tx_free); ++ acx_stop_queue(adev->ndev, NULL); ++ } ++ ++ /* returning current descriptor, so advance to next free one */ ++ adev->tx_head = (head + 1) % TX_CNT; ++end: ++ FN_EXIT0; ++ ++ return (tx_t*)txdesc; ++} ++ ++ ++/*************************************************************** ++** acxmem_l_dealloc_tx ++** Clears out a previously allocatedvoid acxmem_l_dealloc_tx(tx_t *tx_opaque); ++ transmit descriptor. The ACX ++** can get confused if we skip transmit descriptors in the queue, ++** so when we don't need a descriptor return it to its original ++** state and move the queue head pointer back. ++** ++*/ ++void ++acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque) ++{ ++ /* ++ * txdesc is the address of the descriptor on the ACX. ++ */ ++ txdesc_t *txdesc = (txdesc_t*)tx_opaque; ++ txdesc_t tmptxdesc; ++ int index; ++ ++ memset (&tmptxdesc, 0, sizeof(tmptxdesc)); ++ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; ++ tmptxdesc.u.r1.rate = 0x0a; ++ ++ /* ++ * Clear out all of the transmit descriptor except for the next pointer ++ */ ++ copy_to_slavemem (adev, (u32) &(txdesc->HostMemPtr), ++ (u8 *) &(tmptxdesc.HostMemPtr), ++ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc)); ++ ++ /* ++ * This is only called immediately after we've allocated, so we should ++ * be able to set the head back to this descriptor. ++ */ ++ index = ((u8*) txdesc - (u8*)adev->txdesc_start) / adev->txdesc_size; ++ printk ("acx_dealloc: moving head from %d to %d\n", adev->tx_head, index); ++ adev->tx_head = index; ++} ++ ++ ++/*********************************************************************** ++*/ ++void* ++acxmem_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) ++{ ++ return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data; ++} ++ ++ ++/*********************************************************************** ++** acxmem_l_tx_data ++** ++** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). ++** Can be called from acx_i_start_xmit (data frames from net core). ++** ++** FIXME: in case of fragments, should loop over the number of ++** pre-allocated tx descrs, properly setting up transfer data and ++** CTL_xxx flags according to fragment number. ++*/ ++void ++acxmem_update_queue_indicator (acx_device_t *adev, int txqueue) ++{ ++#ifdef USING_MORE_THAN_ONE_TRANSMIT_QUEUE ++ u32 indicator; ++ unsigned long flags; ++ int count; ++ ++ /* ++ * Can't handle an interrupt while we're fiddling with the ACX's lock, ++ * according to TI. The ACX is supposed to hold fw_lock for at most ++ * 500ns. ++ */ ++ local_irq_save (flags); ++ ++ /* ++ * Wait for ACX to release the lock (at most 500ns). ++ */ ++ count = 0; ++ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) ++ && (count++ < 50)) { ++ ndelay (10); ++ } ++ if (count < 50) { ++ ++ /* ++ * Take out the host lock - anything non-zero will work, so don't worry about ++ * be/le ++ */ ++ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 1); ++ ++ /* ++ * Avoid a race condition ++ */ ++ count = 0; ++ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) ++ && (count++ < 50)) { ++ ndelay (10); ++ } ++ ++ if (count < 50) { ++ /* ++ * Mark the queue active ++ */ ++ indicator = read_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator)); ++ indicator |= cpu_to_le32 (1 << txqueue); ++ write_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator), indicator); ++ } ++ ++ /* ++ * Release the host lock ++ */ ++ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 0); ++ ++ } ++ ++ /* ++ * Restore interrupts ++ */ ++ local_irq_restore (flags); ++#endif ++} ++ ++void ++acxmem_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len) ++{ ++ /* ++ * txdesc is the address on the ACX ++ */ ++ txdesc_t *txdesc = (txdesc_t*)tx_opaque; ++ txhostdesc_t *hostdesc1, *hostdesc2; ++ client_t *clt; ++ u16 rate_cur; ++ u8 Ctl_8, Ctl2_8; ++ u32 addr; ++ ++ FN_ENTER; ++ /* fw doesn't tx such packets anyhow */ ++ if (unlikely(len < WLAN_HDR_A3_LEN)) ++ goto end; ++ ++ hostdesc1 = get_txhostdesc(adev, txdesc); ++ /* modify flag status in separate variable to be able to write it back ++ * in one big swoop later (also in order to have less device memory ++ * accesses) */ ++ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); ++ Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */ ++ ++ hostdesc2 = hostdesc1 + 1; ++ ++ /* DON'T simply set Ctl field to 0 here globally, ++ * it needs to maintain a consistent flag status (those are state flags!!), ++ * otherwise it may lead to severe disruption. Only set or reset particular ++ * flags at the exact moment this is needed... */ ++ ++ /* let chip do RTS/CTS handshaking before sending ++ * in case packet size exceeds threshold */ ++ if (len > adev->rts_threshold) ++ SET_BIT(Ctl2_8, DESC_CTL2_RTS); ++ else ++ CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS); ++ ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_3_AP: ++ clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1); ++ break; ++ case ACX_MODE_2_STA: ++ clt = adev->ap_client; ++ break; ++#if 0 ++/* testing was done on acx111: */ ++ case ACX_MODE_MONITOR: ++ SET_BIT(Ctl2_8, 0 ++/* sends CTS to self before packet */ ++ + DESC_CTL2_SEQ /* don't increase sequence field */ ++/* not working (looks like good fcs is still added) */ ++ + DESC_CTL2_FCS /* don't add the FCS */ ++/* not tested */ ++ + DESC_CTL2_MORE_FRAG ++/* not tested */ ++ + DESC_CTL2_RETRY /* don't increase retry field */ ++/* not tested */ ++ + DESC_CTL2_POWER /* don't increase power mgmt. field */ ++/* no effect */ ++ + DESC_CTL2_WEP /* encrypt this frame */ ++/* not tested */ ++ + DESC_CTL2_DUR /* don't increase duration field */ ++ ); ++ /* fallthrough */ ++#endif ++ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ ++ clt = NULL; ++ break; ++ } ++ ++ rate_cur = clt ? clt->rate_cur : adev->rate_bcast; ++ if (unlikely(!rate_cur)) { ++ printk("acx: driver bug! bad ratemask\n"); ++ goto end; ++ } ++ ++ /* used in tx cleanup routine for auto rate and accounting: */ ++ put_txcr(adev, txdesc, clt, rate_cur); ++ ++ write_slavemem16 (adev, (u32) &(txdesc->total_length), cpu_to_le16(len)); ++ hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN); ++ if (IS_ACX111(adev)) { ++ /* note that if !txdesc->do_auto, txrate->cur ++ ** has only one nonzero bit */ ++ txdesc->u.r2.rate111 = cpu_to_le16( ++ rate_cur ++ /* WARNING: I was never able to make it work with prism54 AP. ++ ** It was falling down to 1Mbit where shortpre is not applicable, ++ ** and not working at all at "5,11 basic rates only" setting. ++ ** I even didn't see tx packets in radio packet capture. ++ ** Disabled for now --vda */ ++ /*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */ ++ ); ++#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS ++ /* should add this to rate111 above as necessary */ ++ | (clt->pbcc511 ? RATE111_PBCC511 : 0) ++#endif ++ hostdesc1->length = cpu_to_le16(len); ++ } else { /* ACX100 */ ++ u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100; ++ write_slavemem8 (adev, (u32) &(txdesc->u.r1.rate), rate_100); ++#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS ++ if (clt->pbcc511) { ++ if (n == RATE100_5 || n == RATE100_11) ++ n |= RATE100_PBCC511; ++ } ++ ++ if (clt->shortpre && (clt->cur != RATE111_1)) ++ SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */ ++#endif ++ /* set autodma and reclaim and 1st mpdu */ ++ SET_BIT(Ctl_8, DESC_CTL_FIRSTFRAG); ++ ++#if ACX_FRAGMENTATION ++ /* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */ ++#endif ++ hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN); ++ ++ /* ++ * Since we're not using autodma copy the packet data to the acx now. ++ * Even host descriptors point to the packet header, and the odd indexed ++ * descriptor following points to the packet data. ++ * ++ * The first step is to find free memory in the ACX transmit buffers. ++ * They don't necessarily map one to one with the transmit queue entries, ++ * so search through them starting just after the last one used. ++ */ ++ addr = allocate_acx_txbuf_space (adev, len); ++ if (addr) { ++ chaincopy_to_slavemem (adev, addr, hostdesc1->data, len); ++ } ++ else { ++ /* ++ * Bummer. We thought we might have enough room in the transmit ++ * buffers to send this packet, but it turns out we don't. alloc_tx ++ * has already marked this transmit descriptor as HOSTOWN and ACXDONE, ++ * which means the ACX will hang when it gets to this descriptor unless ++ * we do something about it. Having a bubble in the transmit queue just ++ * doesn't seem to work, so we have to reset this transmit queue entry's ++ * state to its original value and back up our head pointer to point ++ * back to this entry. ++ */ ++ hostdesc1->length = 0; ++ hostdesc2->length = 0; ++ write_slavemem16 (adev, (u32) &(txdesc->total_length), 0); ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG); ++ adev->tx_head = ((u8*) txdesc - (u8*) adev->txdesc_start) / adev->txdesc_size; ++ goto end; ++ } ++ /* ++ * Tell the ACX where the packet is. ++ */ ++ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), addr); ++ ++ } ++ /* don't need to clean ack/rts statistics here, already ++ * done on descr cleanup */ ++ ++ /* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors ++ * are now owned by the acx100; do this as LAST operation */ ++ CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN); ++ /* flush writes before we release hostdesc to the adapter here */ ++ //wmb(); ++ ++ /* write back modified flags */ ++ /* ++ * At this point Ctl_8 should just be FIRSTFRAG ++ */ ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl2_8),Ctl2_8); ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), Ctl_8); ++ /* unused: txdesc->tx_time = cpu_to_le32(jiffies); */ ++ ++ /* ++ * Update the queue indicator to say there's data on the first queue. ++ */ ++ acxmem_update_queue_indicator (adev, 0); ++ ++ /* flush writes before we tell the adapter that it's its turn now */ ++ mmiowb(); ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); ++ write_flush(adev); ++ ++ /* log the packet content AFTER sending it, ++ * in order to not delay sending any further than absolutely needed ++ * Do separate logs for acx100/111 to have human-readable rates */ ++ if (unlikely(acx_debug & (L_XFER|L_DATA))) { ++ u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc; ++ if (IS_ACX111(adev)) ++ printk("tx: pkt (%s): len %d " ++ "rate %04X%s status %u\n", ++ acx_get_packet_type_string(le16_to_cpu(fc)), len, ++ le16_to_cpu(txdesc->u.r2.rate111), ++ (le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "", ++ adev->status); ++ else ++ printk("tx: pkt (%s): len %d rate %03u%s status %u\n", ++ acx_get_packet_type_string(fc), len, ++ read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)), ++ (Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "", ++ adev->status); ++ ++ if (acx_debug & L_DATA) { ++ printk("tx: 802.11 [%d]: ", len); ++ acx_dump_bytes(hostdesc1->data, len); ++ } ++ } ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_l_clean_txdesc ++** ++** This function resets the txdescs' status when the ACX100 ++** signals the TX done IRQ (txdescs have been processed), starting with ++** the pool index of the descriptor which we would use next, ++** in order to make sure that we can be as fast as possible ++** in filling new txdescs. ++** Everytime we get called we know where the next packet to be cleaned is. ++*/ ++ ++#if !ACX_DEBUG ++static inline void log_txbuffer(const acx_device_t *adev) {} ++#else ++static void ++log_txbuffer(acx_device_t *adev) ++{ ++ txdesc_t *txdesc; ++ int i; ++ u8 Ctl_8; ++ ++ /* no FN_ENTER here, we don't want that */ ++ /* no locks here, since it's entirely non-critical code */ ++ txdesc = adev->txdesc_start; ++ if (unlikely(!txdesc)) return; ++ printk("tx: desc->Ctl8's:"); ++ for (i = 0; i < TX_CNT; i++) { ++ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); ++ printk(" %02X", Ctl_8); ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ printk("\n"); ++} ++#endif ++ ++ ++static void ++handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger) ++{ ++ const char *err = "unknown error"; ++ ++ /* hmm, should we handle this as a mask ++ * of *several* bits? ++ * For now I think only caring about ++ * individual bits is ok... */ ++ switch (error) { ++ case 0x01: ++ err = "no Tx due to error in other fragment"; ++ adev->wstats.discard.fragment++; ++ break; ++ case 0x02: ++ err = "Tx aborted"; ++ adev->stats.tx_aborted_errors++; ++ break; ++ case 0x04: ++ err = "Tx desc wrong parameters"; ++ adev->wstats.discard.misc++; ++ break; ++ case 0x08: ++ err = "WEP key not found"; ++ adev->wstats.discard.misc++; ++ break; ++ case 0x10: ++ err = "MSDU lifetime timeout? - try changing " ++ "'iwconfig retry lifetime XXX'"; ++ adev->wstats.discard.misc++; ++ break; ++ case 0x20: ++ err = "excessive Tx retries due to either distance " ++ "too high or unable to Tx or Tx frame error - " ++ "try changing 'iwconfig txpower XXX' or " ++ "'sens'itivity or 'retry'"; ++ adev->wstats.discard.retries++; ++ /* Tx error 0x20 also seems to occur on ++ * overheating, so I'm not sure whether we ++ * actually want to do aggressive radio recalibration, ++ * since people maybe won't notice then that their hardware ++ * is slowly getting cooked... ++ * Or is it still a safe long distance from utter ++ * radio non-functionality despite many radio recalibs ++ * to final destructive overheating of the hardware? ++ * In this case we really should do recalib here... ++ * I guess the only way to find out is to do a ++ * potentially fatal self-experiment :-\ ++ * Or maybe only recalib in case we're using Tx ++ * rate auto (on errors switching to lower speed ++ * --> less heat?) or 802.11 power save mode? ++ * ++ * ok, just do it. */ ++ if (++adev->retry_errors_msg_ratelimit % 4 == 0) { ++ if (adev->retry_errors_msg_ratelimit <= 20) { ++ printk("%s: several excessive Tx " ++ "retry errors occurred, attempting " ++ "to recalibrate radio. Radio " ++ "drift might be caused by increasing " ++ "card temperature, please check the card " ++ "before it's too late!\n", ++ adev->ndev->name); ++ if (adev->retry_errors_msg_ratelimit == 20) ++ printk("disabling above message\n"); ++ } ++ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); ++ } ++ break; ++ case 0x40: ++ err = "Tx buffer overflow"; ++ adev->stats.tx_fifo_errors++; ++ break; ++ case 0x80: ++ err = "DMA error"; ++ adev->wstats.discard.misc++; ++ break; ++ } ++ adev->stats.tx_errors++; ++ if (adev->stats.tx_errors <= 20) ++ printk("%s: tx error 0x%02X, buf %02u! (%s)\n", ++ adev->ndev->name, error, finger, err); ++ else ++ printk("%s: tx error 0x%02X, buf %02u!\n", ++ adev->ndev->name, error, finger); ++} ++ ++ ++unsigned int ++acxmem_l_clean_txdesc(acx_device_t *adev) ++{ ++ txdesc_t *txdesc; ++ unsigned finger; ++ int num_cleaned; ++ u16 r111; ++ u8 error, ack_failures, rts_failures, rts_ok, r100, Ctl_8; ++ u32 acxmem; ++ txdesc_t tmptxdesc; ++ ++ FN_ENTER; ++ ++ /* ++ * Set up a template descriptor for re-initialization. The only ++ * things that get set are Ctl_8 and the rate, and the rate defaults ++ * to 1Mbps. ++ */ ++ memset (&tmptxdesc, 0, sizeof (tmptxdesc)); ++ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; ++ tmptxdesc.u.r1.rate = 0x0a; ++ ++ if (unlikely(acx_debug & L_DEBUG)) ++ log_txbuffer(adev); ++ ++ log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail); ++ ++ /* We know first descr which is not free yet. We advance it as far ++ ** as we see correct bits set in following descs (if next desc ++ ** is NOT free, we shouldn't advance at all). We know that in ++ ** front of tx_tail may be "holes" with isolated free descs. ++ ** We will catch up when all intermediate descs will be freed also */ ++ ++ finger = adev->tx_tail; ++ num_cleaned = 0; ++ while (likely(finger != adev->tx_head)) { ++ txdesc = get_txdesc(adev, finger); ++ ++ /* If we allocated txdesc on tx path but then decided ++ ** to NOT use it, then it will be left as a free "bubble" ++ ** in the "allocated for tx" part of the ring. ++ ** We may meet it on the next ring pass here. */ ++ ++ /* stop if not marked as "tx finished" and "host owned" */ ++ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); ++ if ((Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN) ++ != DESC_CTL_ACXDONE_HOSTOWN) { ++ if (unlikely(!num_cleaned)) { /* maybe remove completely */ ++ log(L_BUFT, "clean_txdesc: tail isn't free. " ++ "tail:%d head:%d\n", ++ adev->tx_tail, adev->tx_head); ++ } ++ break; ++ } ++ ++ /* remember desc values... */ ++ error = read_slavemem8 (adev, (u32) &(txdesc->error)); ++ ack_failures = read_slavemem8 (adev, (u32) &(txdesc->ack_failures)); ++ rts_failures = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures)); ++ rts_ok = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok)); ++ r100 = read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)); ++ r111 = le16_to_cpu(read_slavemem16 (adev, (u32) &(txdesc->u.r2.rate111))); ++ ++ /* need to check for certain error conditions before we ++ * clean the descriptor: we still need valid descr data here */ ++ if (unlikely(0x30 & error)) { ++ /* only send IWEVTXDROP in case of retry or lifetime exceeded; ++ * all other errors mean we screwed up locally */ ++ union iwreq_data wrqu; ++ wlan_hdr_t *hdr; ++ txhostdesc_t *hostdesc; ++ ++ hostdesc = get_txhostdesc(adev, txdesc); ++ hdr = (wlan_hdr_t *)hostdesc->data; ++ MAC_COPY(wrqu.addr.sa_data, hdr->a1); ++ wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL); ++ } ++ ++ /* ++ * Free up the transmit data buffers ++ */ ++ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); ++ if (acxmem) { ++ reclaim_acx_txbuf_space (adev, acxmem); ++ } ++ ++ /* ...and free the desc by clearing all the fields ++ except the next pointer */ ++ copy_to_slavemem (adev, ++ (u32) &(txdesc->HostMemPtr), ++ (u8 *) &(tmptxdesc.HostMemPtr), ++ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc) ++ ); ++ ++ adev->tx_free++; ++ num_cleaned++; ++ ++ if ((adev->tx_free >= TX_START_QUEUE) ++ && (adev->status == ACX_STATUS_4_ASSOCIATED) ++ && (acx_queue_stopped(adev->ndev)) ++ ) { ++ log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n", ++ adev->tx_free); ++ acx_wake_queue(adev->ndev, NULL); ++ } ++ ++ /* do error checking, rate handling and logging ++ * AFTER having done the work, it's faster */ ++ ++ /* do rate handling */ ++ if (adev->rate_auto) { ++ struct client *clt = get_txc(adev, txdesc); ++ if (clt) { ++ u16 cur = get_txr(adev, txdesc); ++ if (clt->rate_cur == cur) { ++ acx_l_handle_txrate_auto(adev, clt, ++ cur, /* intended rate */ ++ r100, r111, /* actually used rate */ ++ (error & 0x30), /* was there an error? */ ++ TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free); ++ } ++ } ++ } ++ ++ if (unlikely(error)) ++ handle_tx_error(adev, error, finger); ++ ++ if (IS_ACX111(adev)) ++ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n", ++ finger, ack_failures, rts_failures, rts_ok, r111); ++ else ++ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n", ++ finger, ack_failures, rts_failures, rts_ok, r100); ++ ++ /* update pointer for descr to be cleaned next */ ++ finger = (finger + 1) % TX_CNT; ++ } ++ ++ /* remember last position */ ++ adev->tx_tail = finger; ++/* end: */ ++ FN_EXIT1(num_cleaned); ++ return num_cleaned; ++} ++ ++/* clean *all* Tx descriptors, and regardless of their previous state. ++ * Used for brute-force reset handling. */ ++void ++acxmem_l_clean_txdesc_emergency(acx_device_t *adev) ++{ ++ txdesc_t *txdesc; ++ int i; ++ u32 acxmem; ++ ++ FN_ENTER; ++ ++ for (i = 0; i < TX_CNT; i++) { ++ txdesc = get_txdesc(adev, i); ++ ++ /* free it */ ++ write_slavemem8 (adev, (u32) &(txdesc->ack_failures), 0); ++ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures), 0); ++ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok), 0); ++ write_slavemem8 (adev, (u32) &(txdesc->error), 0); ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN); ++ ++ /* ++ * Clean up the memory allocated on the ACX for this transmit descriptor. ++ */ ++ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); ++ if (acxmem) { ++ reclaim_acx_txbuf_space (adev, acxmem); ++ } ++ ++ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), 0); ++ } ++ ++ adev->tx_free = TX_CNT; ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_create_tx_host_desc_queue ++*/ ++ ++static void* ++allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg) ++{ ++ void *ptr; ++ ptr = kmalloc (size, GFP_KERNEL); ++ /* ++ * The ACX can't use the physical address, so we'll have to fake it ++ * later and it might be handy to have the virtual address. ++ */ ++ *phy = (dma_addr_t) NULL; ++ ++ if (ptr) { ++ log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n", ++ msg, (int)size, ptr, (unsigned long long)*phy); ++ memset(ptr, 0, size); ++ return ptr; ++ } ++ printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n", ++ msg, (int)size); ++ return NULL; ++} ++ ++ ++/* ++ * In the generic slave memory access mode, most of the stuff in ++ * the txhostdesc_t is unused. It's only here because the rest of ++ * the ACX driver expects it to be since the PCI version uses indirect ++ * host memory organization with DMA. Since we're not using DMA the ++ * only use we have for the host descriptors is to store the packets ++ * on the way out. ++ */ ++static int ++acxmem_s_create_tx_host_desc_queue(acx_device_t *adev) ++{ ++ txhostdesc_t *hostdesc; ++ u8 *txbuf; ++ int i; ++ ++ FN_ENTER; ++ ++ /* allocate TX buffer */ ++ adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS; ++ ++ adev->txbuf_start = allocate(adev, adev->txbuf_area_size, ++ &adev->txbuf_startphy, "txbuf_start"); ++ if (!adev->txbuf_start) ++ goto fail; ++ ++ /* allocate the TX host descriptor queue pool */ ++ adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc); ++ ++ adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size, ++ &adev->txhostdesc_startphy, "txhostdesc_start"); ++ if (!adev->txhostdesc_start) ++ goto fail; ++ ++ /* check for proper alignment of TX host descriptor pool */ ++ if ((long) adev->txhostdesc_start & 3) { ++ printk("acx: driver bug: dma alloc returns unaligned address\n"); ++ goto fail; ++ } ++ ++ hostdesc = adev->txhostdesc_start; ++ txbuf = adev->txbuf_start; ++ ++#if 0 ++/* Each tx buffer is accessed by hardware via ++** txdesc -> txhostdesc(s) -> txbuffer(s). ++** We use only one txhostdesc per txdesc, but it looks like ++** acx111 is buggy: it accesses second txhostdesc ++** (via hostdesc.desc_phy_next field) even if ++** txdesc->length == hostdesc->length and thus ++** entire packet was placed into first txhostdesc. ++** Due to this bug acx111 hangs unless second txhostdesc ++** has le16_to_cpu(hostdesc.length) = 3 (or larger) ++** Storing NULL into hostdesc.desc_phy_next ++** doesn't seem to help. ++** ++** Update: although it worked on Xterasys XN-2522g ++** with len=3 trick, WG311v2 is even more bogus, doesn't work. ++** Keeping this code (#ifdef'ed out) for documentational purposes. ++*/ ++ for (i = 0; i < TX_CNT*2; i++) { ++ hostdesc_phy += sizeof(*hostdesc); ++ if (!(i & 1)) { ++ hostdesc->data_phy = cpu2acx(txbuf_phy); ++ /* hostdesc->data_offset = ... */ ++ /* hostdesc->reserved = ... */ ++ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); ++ /* hostdesc->length = ... */ ++ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); ++ hostdesc->pNext = ptr2acx(NULL); ++ /* hostdesc->Status = ... */ ++ /* below: non-hardware fields */ ++ hostdesc->data = txbuf; ++ ++ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS; ++ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS; ++ } else { ++ /* hostdesc->data_phy = ... */ ++ /* hostdesc->data_offset = ... */ ++ /* hostdesc->reserved = ... */ ++ /* hostdesc->Ctl_16 = ... */ ++ hostdesc->length = cpu_to_le16(3); /* bug workaround */ ++ /* hostdesc->desc_phy_next = ... */ ++ /* hostdesc->pNext = ... */ ++ /* hostdesc->Status = ... */ ++ /* below: non-hardware fields */ ++ /* hostdesc->data = ... */ ++ } ++ hostdesc++; ++ } ++#endif ++/* We initialize two hostdescs so that they point to adjacent ++** memory areas. Thus txbuf is really just a contiguous memory area */ ++ for (i = 0; i < TX_CNT*2; i++) { ++ /* ->data is a non-hardware field: */ ++ hostdesc->data = txbuf; ++ ++ if (!(i & 1)) { ++ txbuf += WLAN_HDR_A3_LEN; ++ } else { ++ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; ++ } ++ hostdesc++; ++ } ++ hostdesc--; ++ ++ FN_EXIT1(OK); ++ return OK; ++fail: ++ printk("acx: create_tx_host_desc_queue FAILED\n"); ++ /* dealloc will be done by free function on error case */ ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*************************************************************** ++** acxmem_s_create_rx_host_desc_queue ++*/ ++/* the whole size of a data buffer (header plus data body) ++ * plus 32 bytes safety offset at the end */ ++#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32) ++ ++static int ++acxmem_s_create_rx_host_desc_queue(acx_device_t *adev) ++{ ++ rxhostdesc_t *hostdesc; ++ rxbuffer_t *rxbuf; ++ int i; ++ ++ FN_ENTER; ++ ++ /* allocate the RX host descriptor queue pool */ ++ adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc); ++ ++ adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size, ++ &adev->rxhostdesc_startphy, "rxhostdesc_start"); ++ if (!adev->rxhostdesc_start) ++ goto fail; ++ ++ /* check for proper alignment of RX host descriptor pool */ ++ if ((long) adev->rxhostdesc_start & 3) { ++ printk("acx: driver bug: dma alloc returns unaligned address\n"); ++ goto fail; ++ } ++ ++ /* allocate Rx buffer pool which will be used by the acx ++ * to store the whole content of the received frames in it */ ++ adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE; ++ ++ adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size, ++ &adev->rxbuf_startphy, "rxbuf_start"); ++ if (!adev->rxbuf_start) ++ goto fail; ++ ++ rxbuf = adev->rxbuf_start; ++ hostdesc = adev->rxhostdesc_start; ++ ++ /* don't make any popular C programming pointer arithmetic mistakes ++ * here, otherwise I'll kill you... ++ * (and don't dare asking me why I'm warning you about that...) */ ++ for (i = 0; i < RX_CNT; i++) { ++ hostdesc->data = rxbuf; ++ hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE); ++ rxbuf++; ++ hostdesc++; ++ } ++ hostdesc--; ++ FN_EXIT1(OK); ++ return OK; ++fail: ++ printk("acx: create_rx_host_desc_queue FAILED\n"); ++ /* dealloc will be done by free function on error case */ ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*************************************************************** ++** acxmem_s_create_hostdesc_queues ++*/ ++int ++acxmem_s_create_hostdesc_queues(acx_device_t *adev) ++{ ++ int result; ++ result = acxmem_s_create_tx_host_desc_queue(adev); ++ if (OK != result) return result; ++ result = acxmem_s_create_rx_host_desc_queue(adev); ++ return result; ++} ++ ++ ++/*************************************************************** ++** acxmem_create_tx_desc_queue ++*/ ++static void ++acxmem_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start) ++{ ++ txdesc_t *txdesc; ++ u32 clr; ++ int i; ++ ++ FN_ENTER; ++ ++ if (IS_ACX100(adev)) ++ adev->txdesc_size = sizeof(*txdesc); ++ else ++ /* the acx111 txdesc is 4 bytes larger */ ++ adev->txdesc_size = sizeof(*txdesc) + 4; ++ ++ /* ++ * This refers to an ACX address, not one of ours ++ */ ++ adev->txdesc_start = (txdesc_t *) tx_queue_start; ++ ++ log(L_DEBUG, "adev->txdesc_start=%p\n", ++ adev->txdesc_start); ++ ++ adev->tx_free = TX_CNT; ++ /* done by memset: adev->tx_head = 0; */ ++ /* done by memset: adev->tx_tail = 0; */ ++ txdesc = adev->txdesc_start; ++ ++ if (IS_ACX111(adev)) { ++ /* ACX111 has a preinitialized Tx buffer! */ ++ /* loop over whole send pool */ ++ /* FIXME: do we have to do the hostmemptr stuff here?? */ ++ for (i = 0; i < TX_CNT; i++) { ++ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; ++ /* reserve two (hdr desc and payload desc) */ ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ } else { ++ /* ACX100 Tx buffer needs to be initialized by us */ ++ /* clear whole send pool. sizeof is safe here (we are acx100) */ ++ ++ /* ++ * adev->txdesc_start refers to device memory, so we can't write ++ * directly to it. ++ */ ++ clr = (u32) adev->txdesc_start; ++ while (clr < (u32) adev->txdesc_start + (TX_CNT * sizeof(*txdesc))) { ++ write_slavemem32 (adev, clr, 0); ++ clr += 4; ++ } ++ ++ /* loop over whole send pool */ ++ for (i = 0; i < TX_CNT; i++) { ++ log(L_DEBUG, "configure card tx descriptor: 0x%p, " ++ "size: 0x%X\n", txdesc, adev->txdesc_size); ++ ++ /* initialise ctl */ ++ /* ++ * No auto DMA here ++ */ ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), ++ (u8) (DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG)); ++ /* done by memset(0): txdesc->Ctl2_8 = 0; */ ++ ++ /* point to next txdesc */ ++ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), ++ (u32) cpu_to_le32 ((u8 *) txdesc + adev->txdesc_size)); ++ ++ /* go to the next one */ ++ /* ++ is safe here (we are acx100) */ ++ txdesc++; ++ } ++ /* go back to the last one */ ++ txdesc--; ++ /* and point to the first making it a ring buffer */ ++ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), ++ (u32) cpu_to_le32 (tx_queue_start)); ++ } ++ FN_EXIT0; ++} ++ ++ ++/*************************************************************** ++** acxmem_create_rx_desc_queue ++*/ ++static void ++acxmem_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start) ++{ ++ rxdesc_t *rxdesc; ++ u32 mem_offs; ++ int i; ++ ++ FN_ENTER; ++ ++ /* done by memset: adev->rx_tail = 0; */ ++ ++ /* ACX111 doesn't need any further config: preconfigures itself. ++ * Simply print ring buffer for debugging */ ++ if (IS_ACX111(adev)) { ++ /* rxdesc_start already set here */ ++ ++ adev->rxdesc_start = (rxdesc_t *) rx_queue_start; ++ ++ rxdesc = adev->rxdesc_start; ++ for (i = 0; i < RX_CNT; i++) { ++ log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc); ++ rxdesc = adev->rxdesc_start = (rxdesc_t *) ++ acx2cpu(rxdesc->pNextDesc); ++ } ++ } else { ++ /* we didn't pre-calculate rxdesc_start in case of ACX100 */ ++ /* rxdesc_start should be right AFTER Tx pool */ ++ adev->rxdesc_start = (rxdesc_t *) ++ ((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t))); ++ /* NB: sizeof(txdesc_t) above is valid because we know ++ ** we are in if (acx100) block. Beware of cut-n-pasting elsewhere! ++ ** acx111's txdesc is larger! */ ++ ++ mem_offs = (u32) adev->rxdesc_start; ++ while (mem_offs < (u32) adev->rxdesc_start + (RX_CNT * sizeof (*rxdesc))) { ++ write_slavemem32 (adev, mem_offs, 0); ++ mem_offs += 4; ++ } ++ ++ /* loop over whole receive pool */ ++ rxdesc = adev->rxdesc_start; ++ for (i = 0; i < RX_CNT; i++) { ++ log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc); ++ /* point to next rxdesc */ ++ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), ++ (u32) cpu_to_le32 ((u8 *) rxdesc + sizeof(*rxdesc))); ++ /* go to the next one */ ++ rxdesc++; ++ } ++ /* go to the last one */ ++ rxdesc--; ++ ++ /* and point to the first making it a ring buffer */ ++ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), ++ (u32) cpu_to_le32 (rx_queue_start)); ++ } ++ FN_EXIT0; ++} ++ ++ ++/*************************************************************** ++** acxmem_create_desc_queues ++*/ ++void ++acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start) ++{ ++ u32 *p; ++ int i; ++ ++ acxmem_create_tx_desc_queue(adev, tx_queue_start); ++ acxmem_create_rx_desc_queue(adev, rx_queue_start); ++ p = (u32 *) adev->acx_queue_indicator; ++ for (i = 0; i < 4; i++) { ++ write_slavemem32 (adev, (u32) p, 0); ++ p++; ++ } ++} ++ ++ ++/*************************************************************** ++** acxmem_s_proc_diag_output ++*/ ++char* ++acxmem_s_proc_diag_output(char *p, acx_device_t *adev) ++{ ++ const char *rtl, *thd, *ttl; ++ txdesc_t *txdesc; ++ u8 Ctl_8; ++ rxdesc_t *rxdesc; ++ int i; ++ u32 tmp; ++ txdesc_t txd; ++ u8 buf[0x200]; ++ int j, k; ++ ++ FN_ENTER; ++ ++#if DUMP_MEM_DURING_DIAG > 0 ++ dump_acxmem (adev, 0, 0x10000); ++ panic ("dump finished"); ++#endif ++ ++ p += sprintf(p, "** Rx buf **\n"); ++ rxdesc = adev->rxdesc_start; ++ if (rxdesc) for (i = 0; i < RX_CNT; i++) { ++ rtl = (i == adev->rx_tail) ? " [tail]" : ""; ++ Ctl_8 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); ++ if (Ctl_8 & DESC_CTL_HOSTOWN) ++ p += sprintf(p, "%02u (%02x) FULL%s\n", i, Ctl_8, rtl); ++ else ++ p += sprintf(p, "%02u (%02x) empty%s\n", i, Ctl_8, rtl); ++ rxdesc++; ++ } ++ p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free, ++ acx_queue_stopped(adev->ndev) ? "STOPPED" : "running"); ++ ++ p += sprintf(p, "** Tx buf %d blocks total, %d available, free list head %04x\n", ++ adev->acx_txbuf_numblocks, adev->acx_txbuf_blocks_free, adev->acx_txbuf_free); ++ txdesc = adev->txdesc_start; ++ if (txdesc) { ++ for (i = 0; i < TX_CNT; i++) { ++ thd = (i == adev->tx_head) ? " [head]" : ""; ++ ttl = (i == adev->tx_tail) ? " [tail]" : ""; ++ copy_from_slavemem (adev, (u8 *) &txd, (u32) txdesc, sizeof (txd)); ++ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); ++ if (Ctl_8 & DESC_CTL_ACXDONE) ++ p += sprintf(p, "%02u ready to free (%02X)%s%s", i, Ctl_8, thd, ttl); ++ else if (Ctl_8 & DESC_CTL_HOSTOWN) ++ p += sprintf(p, "%02u available (%02X)%s%s", i, Ctl_8, thd, ttl); ++ else ++ p += sprintf(p, "%02u busy (%02X)%s%s", i, Ctl_8, thd, ttl); ++ tmp = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); ++ if (tmp) { ++ p += sprintf (p, " %04x", tmp); ++ while ((tmp = read_slavemem32 (adev, (u32) tmp)) != 0x02000000) { ++ tmp <<= 5; ++ p += sprintf (p, " %04x", tmp); ++ } ++ } ++ p += sprintf (p, "\n"); ++ p += sprintf (p, " %04x: %04x %04x %04x %04x %04x %04x %04x %04x %04x %04x %02x %02x %02x %02x\n" ++ "%02x %02x %02x %02x %04x\n", ++ (u32) txdesc, ++ txd.pNextDesc.v, txd.HostMemPtr.v, txd.AcxMemPtr.v, txd.tx_time, ++ txd.total_length, txd.Reserved, ++ txd.dummy[0], txd.dummy[1], txd.dummy[2], txd.dummy[3], ++ txd.Ctl_8, txd.Ctl2_8, txd.error, txd.ack_failures, ++ txd.u.rts.rts_failures, txd.u.rts.rts_ok, txd.u.r1.rate, txd.u.r1.queue_ctrl, ++ txd.queue_info ++ ); ++ if (txd.AcxMemPtr.v) { ++ copy_from_slavemem (adev, buf, txd.AcxMemPtr.v, sizeof (buf)); ++ for (j = 0; (j < txd.total_length) && (j<(sizeof(buf)-4)); j+=16) { ++ p += sprintf (p, " "); ++ for (k = 0; (k < 16) && (j+k < txd.total_length); k++) { ++ p += sprintf (p, " %02x", buf[j+k+4]); ++ } ++ p += sprintf (p, "\n"); ++ } ++ } ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ } ++ ++ p += sprintf(p, ++ "\n" ++ "** Generic slave data **\n" ++ "irq_mask 0x%04x irq_status 0x%04x irq on acx 0x%04x\n" ++ "txbuf_start 0x%p, txbuf_area_size %u\n" ++ "txdesc_size %u, txdesc_start 0x%p\n" ++ "txhostdesc_start 0x%p, txhostdesc_area_size %u\n" ++ "txbuf start 0x%04x, txbuf size %d\n" ++ "rxdesc_start 0x%p\n" ++ "rxhostdesc_start 0x%p, rxhostdesc_area_size %u\n" ++ "rxbuf_start 0x%p, rxbuf_area_size %u\n", ++ adev->irq_mask, adev->irq_status, read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES), ++ adev->txbuf_start, adev->txbuf_area_size, ++ adev->txdesc_size, adev->txdesc_start, ++ adev->txhostdesc_start, adev->txhostdesc_area_size, ++ adev->acx_txbuf_start, adev->acx_txbuf_numblocks * adev->memblocksize, ++ adev->rxdesc_start, ++ adev->rxhostdesc_start, adev->rxhostdesc_area_size, ++ adev->rxbuf_start, adev->rxbuf_area_size); ++ FN_EXIT0; ++ return p; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acxmem_proc_eeprom_output(char *buf, acx_device_t *adev) ++{ ++ char *p = buf; ++ int i; ++ ++ FN_ENTER; ++ ++ for (i = 0; i < 0x400; i++) { ++ acxmem_read_eeprom_byte(adev, i, p++); ++ } ++ ++ FN_EXIT1(p - buf); ++ return p - buf; ++} ++ ++ ++/*********************************************************************** ++*/ ++void ++acxmem_set_interrupt_mask(acx_device_t *adev) ++{ ++ if (IS_ACX111(adev)) { ++ adev->irq_mask = (u16) ~(0 ++ | HOST_INT_RX_DATA ++ | HOST_INT_TX_COMPLETE ++ /* | HOST_INT_TX_XFER */ ++ /* | HOST_INT_RX_COMPLETE */ ++ /* | HOST_INT_DTIM */ ++ /* | HOST_INT_BEACON */ ++ /* | HOST_INT_TIMER */ ++ /* | HOST_INT_KEY_NOT_FOUND */ ++ | HOST_INT_IV_ICV_FAILURE ++ | HOST_INT_CMD_COMPLETE ++ | HOST_INT_INFO ++ | HOST_INT_OVERFLOW ++ /* | HOST_INT_PROCESS_ERROR */ ++ | HOST_INT_SCAN_COMPLETE ++ | HOST_INT_FCS_THRESHOLD ++ | HOST_INT_UNKNOWN ++ ); ++ /* Or else acx100 won't signal cmd completion, right? */ ++ adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */ ++ } else { ++ adev->irq_mask = (u16) ~(0 ++ | HOST_INT_RX_DATA ++ | HOST_INT_TX_COMPLETE ++ /* | HOST_INT_TX_XFER */ ++ /* | HOST_INT_RX_COMPLETE */ ++ /* | HOST_INT_DTIM */ ++ /* | HOST_INT_BEACON */ ++ /* | HOST_INT_TIMER */ ++ /* | HOST_INT_KEY_NOT_FOUND */ ++ /* | HOST_INT_IV_ICV_FAILURE */ ++ | HOST_INT_CMD_COMPLETE ++ | HOST_INT_INFO ++ /* | HOST_INT_OVERFLOW */ ++ /* | HOST_INT_PROCESS_ERROR */ ++ | HOST_INT_SCAN_COMPLETE ++ /* | HOST_INT_FCS_THRESHOLD */ ++ /* | HOST_INT_BEACON_MISSED */ ++ ); ++ adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */ ++ } ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm) ++{ ++ struct acx111_ie_tx_level tx_level; ++ ++ /* since it can be assumed that at least the Maxim radio has a ++ * maximum power output of 20dBm and since it also can be ++ * assumed that these values drive the DAC responsible for ++ * setting the linear Tx level, I'd guess that these values ++ * should be the corresponding linear values for a dBm value, ++ * in other words: calculate the values from that formula: ++ * Y [dBm] = 10 * log (X [mW]) ++ * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm) ++ * and you're done... ++ * Hopefully that's ok, but you never know if we're actually ++ * right... (especially since Windows XP doesn't seem to show ++ * actual Tx dBm values :-P) */ ++ ++ /* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the ++ * values are EXACTLY mW!!! Not sure about RFMD and others, ++ * though... */ ++ static const u8 dbm2val_maxim[21] = { ++ 63, 63, 63, 62, ++ 61, 61, 60, 60, ++ 59, 58, 57, 55, ++ 53, 50, 47, 43, ++ 38, 31, 23, 13, ++ 0 ++ }; ++ static const u8 dbm2val_rfmd[21] = { ++ 0, 0, 0, 1, ++ 2, 2, 3, 3, ++ 4, 5, 6, 8, ++ 10, 13, 16, 20, ++ 25, 32, 41, 50, ++ 63 ++ }; ++ const u8 *table; ++ ++ switch (adev->radio_type) { ++ case RADIO_MAXIM_0D: ++ table = &dbm2val_maxim[0]; ++ break; ++ case RADIO_RFMD_11: ++ case RADIO_RALINK_15: ++ table = &dbm2val_rfmd[0]; ++ break; ++ default: ++ printk("%s: unknown/unsupported radio type, " ++ "cannot modify tx power level yet!\n", ++ adev->ndev->name); ++ return NOT_OK; ++ } ++ /* ++ * The hx4700 EEPROM, at least, only supports 1 power setting. The configure ++ * routine matches the PA bias with the gain, so just use its default value. ++ * The values are: 0x2b for the gain and 0x03 for the PA bias. The firmware ++ * writes the gain level to the Tx gain control DAC and the PA bias to the Maxim ++ * radio's PA bias register. The firmware limits itself to 0 - 64 when writing to the ++ * gain control DAC. ++ * ++ * Physically between the ACX and the radio, higher Tx gain control DAC values result ++ * in less power output; 0 volts to the Maxim radio results in the highest output power ++ * level, which I'm assuming matches up with 0 in the Tx Gain DAC register. ++ * ++ * Although there is only the 1 power setting, one of the radio firmware functions adjusts ++ * the transmit power level up and down. That function is called by the ACX FIQ handler ++ * under certain conditions. ++ */ ++ tx_level.level = 1; ++ //return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); ++ ++ printk("%s: changing radio power level to %u dBm (%u)\n", ++ adev->ndev->name, level_dbm, table[level_dbm]); ++ acxmem_s_write_phy_reg(adev, 0x11, table[level_dbm]); ++ ++ return 0; ++} ++ ++void acxmem_e_release(struct device *dev) { ++} ++ ++/*********************************************************************** ++** acx_cs part ++** ++** called by pcmcia card service ++*/ ++ ++/* ++ The event() function is this driver's Card Services event handler. ++ It will be called by Card Services when an appropriate card status ++ event is received. The config() and release() entry points are ++ used to configure or release a socket, in response to card ++ insertion and ejection events. They are invoked from the acx_cs ++ event handler. ++*/ ++ ++static int acx_cs_config(struct pcmcia_device *link); ++static void acx_cs_release(struct pcmcia_device *link); ++ ++/* ++ The attach() and detach() entry points are used to create and destroy ++ "instances" of the driver, where each instance represents everything ++ needed to manage one actual PCMCIA card. ++*/ ++ ++static void acx_cs_detach(struct pcmcia_device *p_dev); ++ ++/* ++ You'll also need to prototype all the functions that will actually ++ be used to talk to your device. See 'pcmem_cs' for a good example ++ of a fully self-sufficient driver; the other drivers rely more or ++ less on other parts of the kernel. ++*/ ++ ++/* ++ A linked list of "instances" of the acxnet device. Each actual ++ PCMCIA card corresponds to one device instance, and is described ++ by one struct pcmcia_device structure (defined in ds.h). ++ ++ You may not want to use a linked list for this -- for example, the ++ memory card driver uses an array of struct pcmcia_device pointers, where minor ++ device numbers are used to derive the corresponding array index. ++*/ ++ ++/* ++ A driver needs to provide a dev_node_t structure for each device ++ on a card. In some cases, there is only one device per card (for ++ example, ethernet cards, modems). In other cases, there may be ++ many actual or logical devices (SCSI adapters, memory cards with ++ multiple partitions). The dev_node_t structures need to be kept ++ in a linked list starting at the 'dev' field of a struct pcmcia_device ++ structure. We allocate them in the card's private data structure, ++ because they generally shouldn't be allocated dynamically. ++ ++ In this case, we also provide a flag to indicate if a device is ++ "stopped" due to a power management event, or card ejection. The ++ device IO routines can use a flag like this to throttle IO to a ++ card that is not ready to accept it. ++*/ ++ ++ ++/*====================================================================== ++ ++ acx_attach() creates an "instance" of the driver, allocating ++ local data structures for one device. The device is registered ++ with Card Services. ++ ++ The dev_link structure is initialized, but we don't actually ++ configure the card at this point -- we wait until we receive a ++ card insertion event. ++ ++ ======================================================================*/ ++ ++static int acx_cs_probe(struct pcmcia_device *link) ++{ ++ local_info_t *local; ++ struct net_device *ndev; ++ ++ DEBUG(0, "acx_attach()\n"); ++ ++ ndev = alloc_netdev(sizeof(acx_device_t), "wlan%d", dummy_netdev_init); ++ if (!ndev) { ++ printk("acx: no memory for netdevice struct\n"); ++ return -ENOMEM; ++ } ++ ++ /* Interrupt setup */ ++ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; ++ link->irq.IRQInfo1 = IRQ_LEVEL_ID; ++ link->irq.Handler = acxmem_i_interrupt; ++ link->irq.Instance = ndev; ++ ++ /* ++ General socket configuration defaults can go here. In this ++ client, we assume very little, and rely on the CIS for almost ++ everything. In most clients, many details (i.e., number, sizes, ++ and attributes of IO windows) are fixed by the nature of the ++ device, and can be hard-wired here. ++ */ ++ link->conf.Attributes = CONF_ENABLE_IRQ; ++ link->conf.IntType = INT_MEMORY_AND_IO; ++ link->conf.Present = PRESENT_OPTION | PRESENT_COPY; ++ ++ /* Allocate space for private device-specific data */ ++ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); ++ if (!local) { ++ printk(KERN_ERR "acx_cs: no memory for new device\n"); ++ return -ENOMEM; ++ } ++ local->ndev = ndev; ++ ++ link->priv = local; ++ ++ return acx_cs_config(link); ++} /* acx_attach */ ++ ++/*====================================================================== ++ ++ This deletes a driver "instance". The device is de-registered ++ with Card Services. If it has been released, all local data ++ structures are freed. Otherwise, the structures will be freed ++ when the device is released. ++ ++ ======================================================================*/ ++ ++static void acx_cs_detach(struct pcmcia_device *link) ++{ ++ DEBUG(0, "acx_detach(0x%p)\n", link); ++ ++ ++ if ( ((local_info_t*)link->priv)->ndev ) { ++ acxmem_e_close( ((local_info_t*)link->priv)->ndev ); ++ } ++ ++ acx_cs_release(link); ++ ++ ((local_info_t*)link->priv)->ndev = NULL; ++ ++ kfree(link->priv); ++} /* acx_detach */ ++ ++/*====================================================================== ++ ++ acx_config() is scheduled to run after a CARD_INSERTION event ++ is received, to configure the PCMCIA socket, and to make the ++ device available to the system. ++ ++ ======================================================================*/ ++ ++#define CS_CHECK(fn, ret) \ ++do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) ++ ++static int acx_cs_config(struct pcmcia_device *link) ++{ ++ tuple_t tuple; ++ cisparse_t parse; ++ local_info_t *local = link->priv; ++ int last_fn, last_ret; ++ u_char buf[64]; ++ win_req_t req; ++ memreq_t map; ++// int i; ++// acx_device_t *adev; ++ ++// adev = (acx_device_t *)link->priv; ++ ++ DEBUG(0, "acx_cs_config(0x%p)\n", link); ++ ++ /* ++ In this loop, we scan the CIS for configuration table entries, ++ each of which describes a valid card configuration, including ++ voltage, IO window, memory window, and interrupt settings. ++ ++ We make no assumptions about the card to be configured: we use ++ just the information available in the CIS. In an ideal world, ++ this would work for any PCMCIA card, but it requires a complete ++ and accurate CIS. In practice, a driver usually "knows" most of ++ these things without consulting the CIS, and most client drivers ++ will only use the CIS to fill in implementation-defined details. ++ */ ++ tuple.Attributes = 0; ++ tuple.TupleData = (cisdata_t *)buf; ++ tuple.TupleDataMax = sizeof(buf); ++ tuple.TupleOffset = 0; ++ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; ++ ++ /* don't trust the CIS on this; Linksys got it wrong */ ++ //link->conf.Present = 0x63; ++ ++ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); ++ while (1) { ++ cistpl_cftable_entry_t dflt = { 0 }; ++ cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); ++ if (pcmcia_get_tuple_data(link, &tuple) != 0 || ++ pcmcia_parse_tuple(link, &tuple, &parse) != 0) ++ goto next_entry; ++ ++ if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; ++ if (cfg->index == 0) goto next_entry; ++ link->conf.ConfigIndex = cfg->index; ++ ++ /* Does this card need audio output? */ ++ if (cfg->flags & CISTPL_CFTABLE_AUDIO) { ++ link->conf.Attributes |= CONF_ENABLE_SPKR; ++ link->conf.Status = CCSR_AUDIO_ENA; ++ } ++ ++ /* Use power settings for Vcc and Vpp if present */ ++ /* Note that the CIS values need to be rescaled */ ++ if (cfg->vpp1.present & (1<conf.Vpp = ++ cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; ++ else if (dflt.vpp1.present & (1<conf.Vpp = ++ dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; ++ ++ /* Do we need to allocate an interrupt? */ ++ if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) ++ link->conf.Attributes |= CONF_ENABLE_IRQ; ++ if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { ++ cistpl_mem_t *mem = ++ (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; ++// req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_AM|WIN_ENABLE|WIN_USE_WAIT; ++ req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE|WIN_USE_WAIT; ++ req.Base = mem->win[0].host_addr; ++ req.Size = mem->win[0].len; ++ req.Size=0x1000; ++ req.AccessSpeed = 0; ++ if (pcmcia_request_window(&link, &req, &link->win) != 0) ++ goto next_entry; ++ map.Page = 0; map.CardOffset = mem->win[0].card_addr; ++ if (pcmcia_map_mem_page(link->win, &map) != 0) ++ goto next_entry; ++ else ++ printk(KERN_INFO "MEMORY WINDOW FOUND!!!\n"); ++ } ++ /* If we got this far, we're cool! */ ++ break; ++ ++ next_entry: ++ CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); ++ } ++ ++ if (link->conf.Attributes & CONF_ENABLE_IRQ) { ++ printk(KERN_INFO "requesting Irq...\n"); ++ CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); ++ } ++ ++ /* ++ This actually configures the PCMCIA socket -- setting up ++ the I/O windows and the interrupt mapping, and putting the ++ card and host interface into "Memory and IO" mode. ++ */ ++ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); ++ DEBUG(0,"RequestConfiguration OK\n"); ++ ++ ++ memwin.Base=req.Base; ++ memwin.Size=req.Size; ++ ++ acx_init_netdev(local->ndev, &link->dev, memwin.Base, memwin.Size, link->irq.AssignedIRQ); ++ ++#if 1 ++ /* ++ At this point, the dev_node_t structure(s) need to be ++ initialized and arranged in a linked list at link->dev_node. ++ */ ++ strcpy(local->node.dev_name, local->ndev->name ); ++ local->node.major = local->node.minor = 0; ++ link->dev_node = &local->node; ++ ++ /* Finally, report what we've done */ ++ printk(KERN_INFO "%s: index 0x%02x: ", ++ local->ndev->name, link->conf.ConfigIndex); ++#endif ++ if (link->conf.Attributes & CONF_ENABLE_IRQ) ++ printk("irq %d", link->irq.AssignedIRQ); ++ if (link->io.NumPorts1) ++ printk(", io 0x%04x-0x%04x", link->io.BasePort1, ++ link->io.BasePort1+link->io.NumPorts1-1); ++ if (link->io.NumPorts2) ++ printk(" & 0x%04x-0x%04x", link->io.BasePort2, ++ link->io.BasePort2+link->io.NumPorts2-1); ++ if (link->win) ++ printk(", mem 0x%06lx-0x%06lx\n", req.Base, ++ req.Base+req.Size-1); ++ return 0; ++ ++ cs_failed: ++ cs_error(link, last_fn, last_ret); ++ acx_cs_release(link); ++ return -ENODEV; ++} /* acx_config */ ++ ++/*====================================================================== ++ ++ After a card is removed, acx_release() will unregister the ++ device, and release the PCMCIA configuration. If the device is ++ still open, this will be postponed until it is closed. ++ ++ ======================================================================*/ ++ ++static void acx_cs_release(struct pcmcia_device *link) ++{ ++ DEBUG(0, "acx_release(0x%p)\n", link); ++ acxmem_e_remove(link); ++ pcmcia_disable_device(link); ++} ++ ++static int acx_cs_suspend(struct pcmcia_device *link) ++{ ++ local_info_t *local = link->priv; ++ ++ pm_message_t state; ++ acxmem_e_suspend ( local->ndev, state); ++ /* Already done in suspend ++ * netif_device_detach(local->ndev); */ ++ ++ return 0; ++} ++ ++static int acx_cs_resume(struct pcmcia_device *link) ++{ ++ local_info_t *local = link->priv; ++ ++ FN_ENTER; ++ resume_ndev = local->ndev; ++ ++ schedule_work( &fw_resume_work ); ++ ++ /* Already done in suspend ++ if (link->open) { ++ // do we need reset for ACX, if so what function nane is ? ++ //reset_acx_card(local->eth_dev); ++ netif_device_attach(local->ndev); ++ } */ ++ ++ FN_EXIT0; ++ return 0; ++} ++ ++static struct pcmcia_device_id acx_ids[] = { ++ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x8402), ++ PCMCIA_DEVICE_MANF_CARD(0x0250, 0xb001), ++ PCMCIA_DEVICE_NULL, ++}; ++MODULE_DEVICE_TABLE(pcmcia, acx_ids); ++ ++static struct pcmcia_driver acx_driver = { ++ .owner = THIS_MODULE, ++ .drv = { ++ .name = "acx_cs", ++ }, ++ .probe = acx_cs_probe, ++ .remove = acx_cs_detach, ++ .id_table = acx_ids, ++ .suspend = acx_cs_suspend, ++ .resume = acx_cs_resume, ++}; ++ ++int acx_cs_init(void) ++{ ++ /* return success if at least one succeeded */ ++ DEBUG(0, "acxcs_init()\n"); ++ return pcmcia_register_driver(&acx_driver); ++} ++ ++void acx_cs_cleanup(void) ++{ ++ pcmcia_unregister_driver(&acx_driver); ++} ++ ++/* ++ This program is free software; you can redistribute it and/or ++ modify it under the terms of the GNU General Public License ++ as published by the Free Software Foundation; either version 2 ++ of the License, or (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ In addition: ++ ++ Redistribution and use in source and binary forms, with or without ++ modification, are permitted provided that the following conditions ++ are met: ++ ++ 1. Redistributions of source code must retain the above copyright ++ notice, this list of conditions and the following disclaimer. ++ 2. Redistributions in binary form must reproduce the above copyright ++ notice, this list of conditions and the following disclaimer in the ++ documentation and/or other materials provided with the distribution. ++ 3. The name of the author may not be used to endorse or promote ++ products derived from this software without specific prior written ++ permission. ++ ++ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR ++ IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, ++ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ++ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, ++ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING ++ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++MODULE_DESCRIPTION( "ACX Cardbus Driver" ); ++MODULE_LICENSE( "GPL" ); ++ +Index: linux-2.6.23/drivers/net/wireless/acx/htcsable_acx.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/htcsable_acx.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,118 @@ ++/* ++ * WLAN (TI TNETW1100B) support in the HTC Sable ++ * ++ * Copyright (c) 2006 SDG Systems, LLC ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ * 28-March-2006 Todd Blumer ++ */ ++ ++ ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "acx_hw.h" ++ ++#define WLAN_BASE PXA_CS2_PHYS ++ ++/* ++off: b15 c8 d3 ++on: d3 c8 b5 b5- ++*/ ++ ++#define GPIO_NR_HTCSABLE_ACX111 111 ++ ++static int ++htcsable_wlan_stop( void ); ++ ++static int ++htcsable_wlan_start( void ) ++{ ++ printk( "htcsable_wlan_start\n" ); ++ ++ /*asic3_set_gpio_out_c(&htcsable_asic3.dev, 1<" ); ++MODULE_DESCRIPTION( "WLAN driver for HTC Sable" ); ++MODULE_LICENSE( "GPL" ); ++ +Index: linux-2.6.23/drivers/net/wireless/acx/htcuniversal_acx.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/htcuniversal_acx.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,108 @@ ++/* ++ * WLAN (TI TNETW1100B) support in the HTC Universal ++ * ++ * Copyright (c) 2006 SDG Systems, LLC ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ * 28-March-2006 Todd Blumer ++ */ ++ ++ ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "acx_hw.h" ++ ++#define WLAN_BASE PXA_CS2_PHYS ++ ++ ++static int ++htcuniversal_wlan_start( void ) ++{ ++ htcuniversal_egpio_enable(1<" ); ++MODULE_DESCRIPTION( "WLAN driver for HTC Universal" ); ++MODULE_LICENSE( "GPL" ); ++ +Index: linux-2.6.23/drivers/net/wireless/acx/hx4700_acx.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/hx4700_acx.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,108 @@ ++/* ++ * WLAN (TI TNETW1100B) support in the hx470x. ++ * ++ * Copyright (c) 2006 SDG Systems, LLC ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ * 28-March-2006 Todd Blumer ++ */ ++ ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "acx_hw.h" ++ ++#define WLAN_OFFSET 0x1000000 ++#define WLAN_BASE (PXA_CS5_PHYS+WLAN_OFFSET) ++ ++ ++static int ++hx4700_wlan_start( void ) ++{ ++ SET_HX4700_GPIO( WLAN_RESET_N, 0 ); ++ mdelay(5); ++ hx4700_egpio_enable( EGPIO0_VCC_3V3_EN ); ++ mdelay(100); ++ hx4700_egpio_enable( EGPIO7_VCC_3V3_WL_EN ); ++ mdelay(150); ++ hx4700_egpio_enable( EGPIO1_WL_VREG_EN | EGPIO2_VCC_2V1_WL_EN | ++ EGPIO6_WL1V8_EN ); ++ mdelay(10); ++ SET_HX4700_GPIO( WLAN_RESET_N, 1 ); ++ mdelay(50); ++ led_trigger_event_shared(hx4700_radio_trig, LED_FULL); ++ return 0; ++} ++ ++static int ++hx4700_wlan_stop( void ) ++{ ++ hx4700_egpio_disable( EGPIO0_VCC_3V3_EN | EGPIO1_WL_VREG_EN | ++ EGPIO7_VCC_3V3_WL_EN | EGPIO2_VCC_2V1_WL_EN | ++ EGPIO6_WL1V8_EN ); ++ SET_HX4700_GPIO( WLAN_RESET_N, 0 ); ++ led_trigger_event_shared(hx4700_radio_trig, LED_OFF); ++ return 0; ++} ++ ++static struct resource acx_resources[] = { ++ [0] = { ++ .start = WLAN_BASE, ++ .end = WLAN_BASE + 0x20, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = HX4700_IRQ(WLAN_IRQ_N), ++ .end = HX4700_IRQ(WLAN_IRQ_N), ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct acx_hardware_data acx_data = { ++ .start_hw = hx4700_wlan_start, ++ .stop_hw = hx4700_wlan_stop, ++}; ++ ++static struct platform_device acx_device = { ++ .name = "acx-mem", ++ .dev = { ++ .platform_data = &acx_data, ++ }, ++ .num_resources = ARRAY_SIZE( acx_resources ), ++ .resource = acx_resources, ++}; ++ ++static int __init ++hx4700_wlan_init( void ) ++{ ++ printk( "hx4700_wlan_init: acx-mem platform_device_register\n" ); ++ return platform_device_register( &acx_device ); ++} ++ ++ ++static void __exit ++hx4700_wlan_exit( void ) ++{ ++ platform_device_unregister( &acx_device ); ++} ++ ++module_init( hx4700_wlan_init ); ++module_exit( hx4700_wlan_exit ); ++ ++MODULE_AUTHOR( "Todd Blumer " ); ++MODULE_DESCRIPTION( "WLAN driver for iPAQ hx4700" ); ++MODULE_LICENSE( "GPL" ); ++ +Index: linux-2.6.23/drivers/net/wireless/acx/ioctl.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/ioctl.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,2748 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++ ++#include ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) ++#include ++#endif ++#include ++#include ++#include ++/* #include */ /* required for 2.4.x kernels; verify_write() */ ++#include ++#include ++#include ++ ++#include "acx.h" ++ ++ ++/*********************************************************************** ++*/ ++ ++/* channel frequencies ++ * TODO: Currently, every other 802.11 driver keeps its own copy of this. In ++ * the long run this should be integrated into ieee802_11.h or wireless.h or ++ * whatever IEEE802.11x framework evolves */ ++static const u16 acx_channel_freq[] = { ++ 2412, 2417, 2422, 2427, 2432, 2437, 2442, ++ 2447, 2452, 2457, 2462, 2467, 2472, 2484, ++}; ++ ++ ++/*********************************************************************** ++** acx_ioctl_commit ++*/ ++static int ++acx_ioctl_commit(struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) ++ acx_s_update_card_settings(adev); ++ acx_sem_unlock(adev); ++ ++ FN_EXIT0; ++ return OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_ioctl_get_name( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ static const char * const names[] = { "IEEE 802.11b+/g+", "IEEE 802.11b+" }; ++ ++ strcpy(wrqu->name, names[IS_ACX111(adev) ? 0 : 1]); ++ ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_freq ++*/ ++static int ++acx_ioctl_set_freq( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int channel = -1; ++ unsigned int mult = 1; ++ int result; ++ ++ FN_ENTER; ++ ++ if (wrqu->freq.e == 0 && wrqu->freq.m <= 1000) { ++ /* Setting by channel number */ ++ channel = wrqu->freq.m; ++ } else { ++ /* If setting by frequency, convert to a channel */ ++ int i; ++ ++ for (i = 0; i < (6 - wrqu->freq.e); i++) ++ mult *= 10; ++ ++ for (i = 1; i <= 14; i++) ++ if (wrqu->freq.m == acx_channel_freq[i - 1] * mult) ++ channel = i; ++ } ++ ++ if (channel > 14) { ++ result = -EINVAL; ++ goto end; ++ } ++ ++ acx_sem_lock(adev); ++ ++ adev->channel = channel; ++ /* hmm, the following code part is strange, but this is how ++ * it was being done before... */ ++ log(L_IOCTL, "Changing to channel %d\n", channel); ++ SET_BIT(adev->set_mask, GETSET_CHANNEL); ++ ++ result = -EINPROGRESS; /* need to call commit handler */ ++ ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static inline int ++acx_ioctl_get_freq( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ wrqu->freq.e = 0; ++ wrqu->freq.m = adev->channel; ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_mode ++*/ ++static int ++acx_ioctl_set_mode( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ switch (wrqu->mode) { ++ case IW_MODE_AUTO: ++ adev->mode = ACX_MODE_OFF; ++ break; ++ case IW_MODE_MONITOR: ++ adev->mode = ACX_MODE_MONITOR; ++ break; ++ case IW_MODE_ADHOC: ++ adev->mode = ACX_MODE_0_ADHOC; ++ break; ++ case IW_MODE_INFRA: ++ adev->mode = ACX_MODE_2_STA; ++ break; ++ case IW_MODE_MASTER: ++ printk("acx: master mode (HostAP) is very, very " ++ "experimental! It might work partially, but " ++ "better get prepared for nasty surprises " ++ "at any time\n"); ++ adev->mode = ACX_MODE_3_AP; ++ break; ++ case IW_MODE_REPEAT: ++ case IW_MODE_SECOND: ++ default: ++ result = -EOPNOTSUPP; ++ goto end_unlock; ++ } ++ ++ log(L_ASSOC, "new adev->mode=%d\n", adev->mode); ++ SET_BIT(adev->set_mask, GETSET_MODE); ++ result = -EINPROGRESS; ++ ++end_unlock: ++ acx_sem_unlock(adev); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_ioctl_get_mode( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result = 0; ++ ++ switch (adev->mode) { ++ case ACX_MODE_OFF: ++ wrqu->mode = IW_MODE_AUTO; break; ++ case ACX_MODE_MONITOR: ++ wrqu->mode = IW_MODE_MONITOR; break; ++ case ACX_MODE_0_ADHOC: ++ wrqu->mode = IW_MODE_ADHOC; break; ++ case ACX_MODE_2_STA: ++ wrqu->mode = IW_MODE_INFRA; break; ++ case ACX_MODE_3_AP: ++ wrqu->mode = IW_MODE_MASTER; break; ++ default: ++ result = -EOPNOTSUPP; ++ } ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_ioctl_set_sens( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->sens; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ acx_sem_lock(adev); ++ ++ adev->sensitivity = (1 == vwrq->disabled) ? 0 : vwrq->value; ++ SET_BIT(adev->set_mask, GETSET_SENSITIVITY); ++ ++ acx_sem_unlock(adev); ++ ++ return -EINPROGRESS; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_ioctl_get_sens( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->sens; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ if (IS_USB(adev)) ++ /* setting the PHY reg via fw cmd doesn't work yet */ ++ return -EOPNOTSUPP; ++ ++ /* acx_sem_lock(adev); */ ++ ++ vwrq->value = adev->sensitivity; ++ vwrq->disabled = (vwrq->value == 0); ++ vwrq->fixed = 1; ++ ++ /* acx_sem_unlock(adev); */ ++ ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_ap ++** ++** Sets the MAC address of the AP to associate with ++*/ ++static int ++acx_ioctl_set_ap( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct sockaddr *awrq = &wrqu->ap_addr; ++ acx_device_t *adev = ndev2adev(ndev); ++ int result = 0; ++ const u8 *ap; ++ ++ FN_ENTER; ++ if (NULL == awrq) { ++ result = -EFAULT; ++ goto end; ++ } ++ if (ARPHRD_ETHER != awrq->sa_family) { ++ result = -EINVAL; ++ goto end; ++ } ++ ++ ap = awrq->sa_data; ++ acxlog_mac(L_IOCTL, "set AP=", ap, "\n"); ++ ++ MAC_COPY(adev->ap, ap); ++ ++ /* We want to start rescan in managed or ad-hoc mode, ++ ** otherwise just set adev->ap. ++ ** "iwconfig ap mode managed": we must be able ++ ** to set ap _first_ and _then_ set mode */ ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_2_STA: ++ /* FIXME: if there is a convention on what zero AP means, ++ ** please add a comment about that. I don't know of any --vda */ ++ if (mac_is_zero(ap)) { ++ /* "off" == 00:00:00:00:00:00 */ ++ MAC_BCAST(adev->ap); ++ log(L_IOCTL, "Not reassociating\n"); ++ } else { ++ log(L_IOCTL, "Forcing reassociation\n"); ++ SET_BIT(adev->set_mask, GETSET_RESCAN); ++ } ++ break; ++ } ++ result = -EINPROGRESS; ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_ioctl_get_ap( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct sockaddr *awrq = &wrqu->ap_addr; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ if (ACX_STATUS_4_ASSOCIATED == adev->status) { ++ /* as seen in Aironet driver, airo.c */ ++ MAC_COPY(awrq->sa_data, adev->bssid); ++ } else { ++ MAC_ZERO(awrq->sa_data); ++ } ++ awrq->sa_family = ARPHRD_ETHER; ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_get_aplist ++** ++** Deprecated in favor of iwscan. ++** We simply return the list of currently available stations in range, ++** don't do a new scan. ++*/ ++static int ++acx_ioctl_get_aplist( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_point *dwrq = &wrqu->data; ++ acx_device_t *adev = ndev2adev(ndev); ++ struct sockaddr *address = (struct sockaddr *) extra; ++ struct iw_quality qual[IW_MAX_AP]; ++ int i, cur; ++ int result = OK; ++ ++ FN_ENTER; ++ ++ /* we have AP list only in STA mode */ ++ if (ACX_MODE_2_STA != adev->mode) { ++ result = -EOPNOTSUPP; ++ goto end; ++ } ++ ++ cur = 0; ++ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { ++ struct client *bss = &adev->sta_list[i]; ++ if (!bss->used) continue; ++ MAC_COPY(address[cur].sa_data, bss->bssid); ++ address[cur].sa_family = ARPHRD_ETHER; ++ qual[cur].level = bss->sir; ++ qual[cur].noise = bss->snr; ++#ifndef OLD_QUALITY ++ qual[cur].qual = acx_signal_determine_quality(qual[cur].level, ++ qual[cur].noise); ++#else ++ qual[cur].qual = (qual[cur].noise <= 100) ? ++ 100 - qual[cur].noise : 0; ++#endif ++ /* no scan: level/noise/qual not updated: */ ++ qual[cur].updated = 0; ++ cur++; ++ } ++ if (cur) { ++ dwrq->flags = 1; ++ memcpy(extra + sizeof(struct sockaddr)*cur, &qual, ++ sizeof(struct iw_quality)*cur); ++ } ++ dwrq->length = cur; ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_ioctl_set_scan( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ /* don't start scan if device is not up yet */ ++ if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { ++ result = -EAGAIN; ++ goto end_unlock; ++ } ++ ++ /* This is NOT a rescan for new AP! ++ ** Do not use SET_BIT(GETSET_RESCAN); */ ++ acx_s_cmd_start_scan(adev); ++ result = OK; ++ ++end_unlock: ++ acx_sem_unlock(adev); ++/* end: */ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_s_scan_add_station ++*/ ++/* helper. not sure whether it's really a _s_leeping fn */ ++static char* ++acx_s_scan_add_station( ++ acx_device_t *adev, ++ char *ptr, ++ char *end_buf, ++ struct client *bss) ++{ ++ struct iw_event iwe; ++ char *ptr_rate; ++ ++ FN_ENTER; ++ ++ /* MAC address has to be added first */ ++ iwe.cmd = SIOCGIWAP; ++ iwe.u.ap_addr.sa_family = ARPHRD_ETHER; ++ MAC_COPY(iwe.u.ap_addr.sa_data, bss->bssid); ++ acxlog_mac(L_IOCTL, "scan, station address: ", bss->bssid, "\n"); ++ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_ADDR_LEN); ++ ++ /* Add ESSID */ ++ iwe.cmd = SIOCGIWESSID; ++ iwe.u.data.length = bss->essid_len; ++ iwe.u.data.flags = 1; ++ log(L_IOCTL, "scan, essid: %s\n", bss->essid); ++ ptr = iwe_stream_add_point(ptr, end_buf, &iwe, bss->essid); ++ ++ /* Add mode */ ++ iwe.cmd = SIOCGIWMODE; ++ if (bss->cap_info & (WF_MGMT_CAP_ESS | WF_MGMT_CAP_IBSS)) { ++ if (bss->cap_info & WF_MGMT_CAP_ESS) ++ iwe.u.mode = IW_MODE_MASTER; ++ else ++ iwe.u.mode = IW_MODE_ADHOC; ++ log(L_IOCTL, "scan, mode: %d\n", iwe.u.mode); ++ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_UINT_LEN); ++ } ++ ++ /* Add frequency */ ++ iwe.cmd = SIOCGIWFREQ; ++ iwe.u.freq.m = acx_channel_freq[bss->channel - 1] * 100000; ++ iwe.u.freq.e = 1; ++ log(L_IOCTL, "scan, frequency: %d\n", iwe.u.freq.m); ++ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_FREQ_LEN); ++ ++ /* Add link quality */ ++ iwe.cmd = IWEVQUAL; ++ /* FIXME: these values should be expressed in dBm, but we don't know ++ * how to calibrate it yet */ ++ iwe.u.qual.level = bss->sir; ++ iwe.u.qual.noise = bss->snr; ++#ifndef OLD_QUALITY ++ iwe.u.qual.qual = acx_signal_determine_quality(iwe.u.qual.level, ++ iwe.u.qual.noise); ++#else ++ iwe.u.qual.qual = (iwe.u.qual.noise <= 100) ? ++ 100 - iwe.u.qual.noise : 0; ++#endif ++ iwe.u.qual.updated = 7; ++ log(L_IOCTL, "scan, link quality: %d/%d/%d\n", ++ iwe.u.qual.level, iwe.u.qual.noise, iwe.u.qual.qual); ++ ptr = iwe_stream_add_event(ptr, end_buf, &iwe, IW_EV_QUAL_LEN); ++ ++ /* Add encryption */ ++ iwe.cmd = SIOCGIWENCODE; ++ if (bss->cap_info & WF_MGMT_CAP_PRIVACY) ++ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; ++ else ++ iwe.u.data.flags = IW_ENCODE_DISABLED; ++ iwe.u.data.length = 0; ++ log(L_IOCTL, "scan, encryption flags: %X\n", iwe.u.data.flags); ++ ptr = iwe_stream_add_point(ptr, end_buf, &iwe, bss->essid); ++ ++ /* add rates */ ++ iwe.cmd = SIOCGIWRATE; ++ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; ++ ptr_rate = ptr + IW_EV_LCP_LEN; ++ ++ { ++ u16 rate = bss->rate_cap; ++ const u8* p = acx_bitpos2ratebyte; ++ while (rate) { ++ if (rate & 1) { ++ iwe.u.bitrate.value = *p * 500000; /* units of 500kb/s */ ++ log(L_IOCTL, "scan, rate: %d\n", iwe.u.bitrate.value); ++ ptr_rate = iwe_stream_add_value(ptr, ptr_rate, end_buf, ++ &iwe, IW_EV_PARAM_LEN); ++ } ++ rate >>= 1; ++ p++; ++ }} ++ ++ if ((ptr_rate - ptr) > (ptrdiff_t)IW_EV_LCP_LEN) ++ ptr = ptr_rate; ++ ++ /* drop remaining station data items for now */ ++ ++ FN_EXIT0; ++ return ptr; ++} ++ ++ ++/*********************************************************************** ++ * acx_ioctl_get_scan ++ */ ++static int ++acx_ioctl_get_scan( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_point *dwrq = &wrqu->data; ++ acx_device_t *adev = ndev2adev(ndev); ++ char *ptr = extra; ++ int i; ++ int result = OK; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ /* no scan available if device is not up yet */ ++ if (!(adev->dev_state_mask & ACX_STATE_IFACE_UP)) { ++ log(L_IOCTL, "iface not up yet\n"); ++ result = -EAGAIN; ++ goto end_unlock; ++ } ++ ++#ifdef ENODATA_TO_BE_USED_AFTER_SCAN_ERROR_ONLY ++ if (adev->bss_table_count == 0) { ++ /* no stations found */ ++ result = -ENODATA; ++ goto end_unlock; ++ } ++#endif ++ ++ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { ++ struct client *bss = &adev->sta_list[i]; ++ if (!bss->used) continue; ++ ptr = acx_s_scan_add_station(adev, ptr, ++ extra + IW_SCAN_MAX_DATA, bss); ++ } ++ dwrq->length = ptr - extra; ++ dwrq->flags = 0; ++ ++end_unlock: ++ acx_sem_unlock(adev); ++/* end: */ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_essid ++*/ ++static int ++acx_ioctl_set_essid( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_point *dwrq = &wrqu->essid; ++ acx_device_t *adev = ndev2adev(ndev); ++ int len = dwrq->length; ++ int result; ++ ++ FN_ENTER; ++ ++ if (len < 0) { ++ result = -EINVAL; ++ goto end; ++ } ++ ++ log(L_IOCTL, "set ESSID '%*s', length %d, flags 0x%04X\n", ++ len, extra, len, dwrq->flags); ++ ++#if WIRELESS_EXT >= 21 ++ /* WE 21 gives real ESSID strlen, not +1 (trailing zero): ++ * see LKML "[patch] drivers/net/wireless: correct reported ssid lengths" */ ++ len += 1; ++#endif ++ ++ acx_sem_lock(adev); ++ ++ /* ESSID disabled? */ ++ if (0 == dwrq->flags) { ++ adev->essid_active = 0; ++ ++ } else { ++ if (len > IW_ESSID_MAX_SIZE) { ++ result = -E2BIG; ++ goto end_unlock; ++ } ++ ++ if (len >= sizeof(adev->essid)) ++ len = sizeof(adev->essid) - 1; ++ memcpy(adev->essid, extra, len); ++ adev->essid[len] = '\0'; ++ /* Paranoia: just in case there is a '\0'... */ ++ adev->essid_len = strlen(adev->essid); ++ adev->essid_active = 1; ++ } ++ ++ SET_BIT(adev->set_mask, GETSET_RESCAN); ++ ++ result = -EINPROGRESS; ++ ++end_unlock: ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_ioctl_get_essid( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_point *dwrq = &wrqu->essid; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ dwrq->flags = adev->essid_active; ++ if (adev->essid_active) { ++ memcpy(extra, adev->essid, adev->essid_len); ++ extra[adev->essid_len] = '\0'; ++ dwrq->length = adev->essid_len + 1; ++ dwrq->flags = 1; ++ } ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_l_update_client_rates ++*/ ++static void ++acx_l_update_client_rates(acx_device_t *adev, u16 rate) ++{ ++ int i; ++ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { ++ client_t *clt = &adev->sta_list[i]; ++ if (!clt->used) continue; ++ clt->rate_cfg = (clt->rate_cap & rate); ++ if (!clt->rate_cfg) { ++ /* no compatible rates left: kick client */ ++ acxlog_mac(L_ASSOC, "client ",clt->address," kicked: " ++ "rates are not compatible anymore\n"); ++ acx_l_sta_list_del(adev, clt); ++ continue; ++ } ++ clt->rate_cur &= clt->rate_cfg; ++ if (!clt->rate_cur) { ++ /* current rate become invalid, choose a valid one */ ++ clt->rate_cur = 1 << lowest_bit(clt->rate_cfg); ++ } ++ if (IS_ACX100(adev)) ++ clt->rate_100 = acx_bitpos2rate100[highest_bit(clt->rate_cur)]; ++ clt->fallback_count = clt->stepup_count = 0; ++ clt->ignore_count = 16; ++ } ++ switch (adev->mode) { ++ case ACX_MODE_2_STA: ++ if (adev->ap_client && !adev->ap_client->used) { ++ /* Owwww... we kicked our AP!! :) */ ++ SET_BIT(adev->set_mask, GETSET_RESCAN); ++ } ++ } ++} ++ ++ ++/*********************************************************************** ++*/ ++/* maps bits from acx111 rate to rate in Mbits */ ++static const unsigned int ++acx111_rate_tbl[] = { ++ 1000000, /* 0 */ ++ 2000000, /* 1 */ ++ 5500000, /* 2 */ ++ 6000000, /* 3 */ ++ 9000000, /* 4 */ ++ 11000000, /* 5 */ ++ 12000000, /* 6 */ ++ 18000000, /* 7 */ ++ 22000000, /* 8 */ ++ 24000000, /* 9 */ ++ 36000000, /* 10 */ ++ 48000000, /* 11 */ ++ 54000000, /* 12 */ ++ 500000, /* 13, should not happen */ ++ 500000, /* 14, should not happen */ ++ 500000, /* 15, should not happen */ ++}; ++ ++/*********************************************************************** ++ * acx_ioctl_set_rate ++ */ ++static int ++acx_ioctl_set_rate( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->param; ++ acx_device_t *adev = ndev2adev(ndev); ++ u16 txrate_cfg = 1; ++ unsigned long flags; ++ int autorate; ++ int result = -EINVAL; ++ ++ FN_ENTER; ++ log(L_IOCTL, "rate %d fixed 0x%X disabled 0x%X flags 0x%X\n", ++ vwrq->value, vwrq->fixed, vwrq->disabled, vwrq->flags); ++ ++ if ((0 == vwrq->fixed) || (1 == vwrq->fixed)) { ++ int i = VEC_SIZE(acx111_rate_tbl)-1; ++ if (vwrq->value == -1) ++ /* "iwconfig rate auto" --> choose highest */ ++ vwrq->value = IS_ACX100(adev) ? 22000000 : 54000000; ++ while (i >= 0) { ++ if (vwrq->value == acx111_rate_tbl[i]) { ++ txrate_cfg <<= i; ++ i = 0; ++ break; ++ } ++ i--; ++ } ++ if (i == -1) { /* no matching rate */ ++ result = -EINVAL; ++ goto end; ++ } ++ } else { /* rate N, N<1000 (driver specific): we don't use this */ ++ result = -EOPNOTSUPP; ++ goto end; ++ } ++ /* now: only one bit is set in txrate_cfg, corresponding to ++ ** indicated rate */ ++ ++ autorate = (vwrq->fixed == 0) && (RATE111_1 != txrate_cfg); ++ if (autorate) { ++ /* convert 00100000 -> 00111111 */ ++ txrate_cfg = (txrate_cfg<<1)-1; ++ } ++ ++ if (IS_ACX100(adev)) { ++ txrate_cfg &= RATE111_ACX100_COMPAT; ++ if (!txrate_cfg) { ++ result = -ENOTSUPP; /* rate is not supported by acx100 */ ++ goto end; ++ } ++ } ++ ++ acx_sem_lock(adev); ++ acx_lock(adev, flags); ++ ++ adev->rate_auto = autorate; ++ adev->rate_oper = txrate_cfg; ++ adev->rate_basic = txrate_cfg; ++ /* only do that in auto mode, non-auto will be able to use ++ * one specific Tx rate only anyway */ ++ if (autorate) { ++ /* only use 802.11b base rates, for standard 802.11b H/W ++ * compatibility */ ++ adev->rate_basic &= RATE111_80211B_COMPAT; ++ } ++ adev->rate_bcast = 1 << lowest_bit(txrate_cfg); ++ if (IS_ACX100(adev)) ++ adev->rate_bcast100 = acx_rate111to100(adev->rate_bcast); ++ acx_l_update_ratevector(adev); ++ acx_l_update_client_rates(adev, txrate_cfg); ++ ++ /* Do/don't do tx rate fallback; beacon contents and rate */ ++ SET_BIT(adev->set_mask, SET_RATE_FALLBACK|SET_TEMPLATES); ++ result = -EINPROGRESS; ++ ++ acx_unlock(adev, flags); ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_get_rate ++*/ ++static int ++acx_ioctl_get_rate( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->param; ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ u16 rate; ++ ++ acx_lock(adev, flags); ++ rate = adev->rate_oper; ++ if (adev->ap_client) ++ rate = adev->ap_client->rate_cur; ++ vwrq->value = acx111_rate_tbl[highest_bit(rate)]; ++ vwrq->fixed = !adev->rate_auto; ++ vwrq->disabled = 0; ++ acx_unlock(adev, flags); ++ ++ return OK; ++} ++ ++static int ++acx_ioctl_set_rts( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->rts; ++ acx_device_t *adev = ndev2adev(ndev); ++ int val = vwrq->value; ++ ++ if (vwrq->disabled) ++ val = 2312; ++ if ((val < 0) || (val > 2312)) ++ return -EINVAL; ++ ++ adev->rts_threshold = val; ++ return OK; ++} ++ ++static inline int ++acx_ioctl_get_rts( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->rts; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ vwrq->value = adev->rts_threshold; ++ vwrq->disabled = (vwrq->value >= 2312); ++ vwrq->fixed = 1; ++ return OK; ++} ++ ++ ++#if ACX_FRAGMENTATION ++static int ++acx_ioctl_set_frag( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ struct iw_param *vwrq, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int val = vwrq->value; ++ ++ if (vwrq->disabled) ++ val = 32767; ++ else ++ if ((val < 256) || (val > 2347)) ++ return -EINVAL; ++ ++ adev->frag_threshold = val; ++ return OK; ++} ++ ++static inline int ++acx_ioctl_get_frag( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->frag; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ vwrq->value = adev->frag_threshold; ++ vwrq->disabled = (vwrq->value >= 2347); ++ vwrq->fixed = 1; ++ return OK; ++} ++#endif ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_encode ++*/ ++static int ++acx_ioctl_set_encode( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_point *dwrq = &wrqu->encoding; ++ acx_device_t *adev = ndev2adev(ndev); ++ int index; ++ int result; ++ ++ FN_ENTER; ++ ++ log(L_IOCTL, "set encoding flags=0x%04X, size=%d, key: %s\n", ++ dwrq->flags, dwrq->length, extra ? "set" : "No key"); ++ ++ acx_sem_lock(adev); ++ ++ index = (dwrq->flags & IW_ENCODE_INDEX) - 1; ++ ++ if (dwrq->length > 0) { ++ /* if index is 0 or invalid, use default key */ ++ if ((index < 0) || (index > 3)) ++ index = (int)adev->wep_current_index; ++ ++ if (0 == (dwrq->flags & IW_ENCODE_NOKEY)) { ++ if (dwrq->length > 29) ++ dwrq->length = 29; /* restrict it */ ++ ++ if (dwrq->length > 13) { ++ /* 29*8 == 232, WEP256 */ ++ adev->wep_keys[index].size = 29; ++ } else if (dwrq->length > 5) { ++ /* 13*8 == 104bit, WEP128 */ ++ adev->wep_keys[index].size = 13; ++ } else if (dwrq->length > 0) { ++ /* 5*8 == 40bit, WEP64 */ ++ adev->wep_keys[index].size = 5; ++ } else { ++ /* disable key */ ++ adev->wep_keys[index].size = 0; ++ } ++ ++ memset(adev->wep_keys[index].key, 0, ++ sizeof(adev->wep_keys[index].key)); ++ memcpy(adev->wep_keys[index].key, extra, dwrq->length); ++ } ++ } else { ++ /* set transmit key */ ++ if ((index >= 0) && (index <= 3)) ++ adev->wep_current_index = index; ++ else if (0 == (dwrq->flags & IW_ENCODE_MODE)) { ++ /* complain if we were not just setting ++ * the key mode */ ++ result = -EINVAL; ++ goto end_unlock; ++ } ++ } ++ ++ adev->wep_enabled = !(dwrq->flags & IW_ENCODE_DISABLED); ++ ++ if (dwrq->flags & IW_ENCODE_OPEN) { ++ adev->auth_alg = WLAN_AUTH_ALG_OPENSYSTEM; ++ adev->wep_restricted = 0; ++ ++ } else if (dwrq->flags & IW_ENCODE_RESTRICTED) { ++ adev->auth_alg = WLAN_AUTH_ALG_SHAREDKEY; ++ adev->wep_restricted = 1; ++ } ++ ++ /* set flag to make sure the card WEP settings get updated */ ++ SET_BIT(adev->set_mask, GETSET_WEP); ++ ++ log(L_IOCTL, "len=%d, key at 0x%p, flags=0x%X\n", ++ dwrq->length, extra, dwrq->flags); ++ ++ for (index = 0; index <= 3; index++) { ++ if (adev->wep_keys[index].size) { ++ log(L_IOCTL, "index=%d, size=%d, key at 0x%p\n", ++ adev->wep_keys[index].index, ++ (int) adev->wep_keys[index].size, ++ adev->wep_keys[index].key); ++ } ++ } ++ result = -EINPROGRESS; ++ ++end_unlock: ++ acx_sem_unlock(adev); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_get_encode ++*/ ++static int ++acx_ioctl_get_encode( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_point *dwrq = &wrqu->encoding; ++ acx_device_t *adev = ndev2adev(ndev); ++ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; ++ ++ FN_ENTER; ++ ++ if (adev->wep_enabled == 0) { ++ dwrq->flags = IW_ENCODE_DISABLED; ++ } else { ++ if ((index < 0) || (index > 3)) ++ index = (int)adev->wep_current_index; ++ ++ dwrq->flags = (adev->wep_restricted == 1) ? ++ IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN; ++ dwrq->length = adev->wep_keys[index].size; ++ ++ memcpy(extra, adev->wep_keys[index].key, ++ adev->wep_keys[index].size); ++ } ++ ++ /* set the current index */ ++ SET_BIT(dwrq->flags, index + 1); ++ ++ log(L_IOCTL, "len=%d, key=%p, flags=0x%X\n", ++ dwrq->length, dwrq->pointer, ++ dwrq->flags); ++ ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_ioctl_set_power( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->power; ++ acx_device_t *adev = ndev2adev(ndev); ++ int result = -EINPROGRESS; ++ ++ FN_ENTER; ++ ++ log(L_IOCTL, "set 802.11 powersave flags=0x%04X\n", vwrq->flags); ++ ++ acx_sem_lock(adev); ++ ++ if (vwrq->disabled) { ++ CLEAR_BIT(adev->ps_wakeup_cfg, PS_CFG_ENABLE); ++ SET_BIT(adev->set_mask, GETSET_POWER_80211); ++ goto end; ++ } ++ if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { ++ u16 ps_timeout = (vwrq->value * 1024) / 1000; ++ ++ if (ps_timeout > 255) ++ ps_timeout = 255; ++ log(L_IOCTL, "setting PS timeout value to %d time units " ++ "due to %dus\n", ps_timeout, vwrq->value); ++ adev->ps_hangover_period = ps_timeout; ++ } else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) { ++ u16 ps_periods = vwrq->value / 1000000; ++ ++ if (ps_periods > 255) ++ ps_periods = 255; ++ log(L_IOCTL, "setting PS period value to %d periods " ++ "due to %dus\n", ps_periods, vwrq->value); ++ adev->ps_listen_interval = ps_periods; ++ CLEAR_BIT(adev->ps_wakeup_cfg, PS_CFG_WAKEUP_MODE_MASK); ++ SET_BIT(adev->ps_wakeup_cfg, PS_CFG_WAKEUP_EACH_ITVL); ++ } ++ ++ switch (vwrq->flags & IW_POWER_MODE) { ++ /* FIXME: are we doing the right thing here? */ ++ case IW_POWER_UNICAST_R: ++ CLEAR_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS); ++ break; ++ case IW_POWER_MULTICAST_R: ++ SET_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS); ++ break; ++ case IW_POWER_ALL_R: ++ SET_BIT(adev->ps_options, PS_OPT_STILL_RCV_BCASTS); ++ break; ++ case IW_POWER_ON: ++ break; ++ default: ++ log(L_IOCTL, "unknown PS mode\n"); ++ result = -EINVAL; ++ goto end; ++ } ++ ++ SET_BIT(adev->ps_wakeup_cfg, PS_CFG_ENABLE); ++ SET_BIT(adev->set_mask, GETSET_POWER_80211); ++end: ++ acx_sem_unlock(adev); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx_ioctl_get_power( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->power; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ FN_ENTER; ++ ++ log(L_IOCTL, "Get 802.11 Power Save flags = 0x%04X\n", vwrq->flags); ++ vwrq->disabled = ((adev->ps_wakeup_cfg & PS_CFG_ENABLE) == 0); ++ if (vwrq->disabled) ++ goto end; ++ ++ if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { ++ vwrq->value = adev->ps_hangover_period * 1000 / 1024; ++ vwrq->flags = IW_POWER_TIMEOUT; ++ } else { ++ vwrq->value = adev->ps_listen_interval * 1000000; ++ vwrq->flags = IW_POWER_PERIOD|IW_POWER_RELATIVE; ++ } ++ if (adev->ps_options & PS_OPT_STILL_RCV_BCASTS) ++ SET_BIT(vwrq->flags, IW_POWER_ALL_R); ++ else ++ SET_BIT(vwrq->flags, IW_POWER_UNICAST_R); ++end: ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_get_txpow ++*/ ++static inline int ++acx_ioctl_get_txpow( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->power; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ FN_ENTER; ++ ++ vwrq->flags = IW_TXPOW_DBM; ++ vwrq->disabled = 0; ++ vwrq->fixed = 1; ++ vwrq->value = adev->tx_level_dbm; ++ ++ log(L_IOCTL, "get txpower:%d dBm\n", adev->tx_level_dbm); ++ ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_txpow ++*/ ++static int ++acx_ioctl_set_txpow( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->power; ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ ++ FN_ENTER; ++ ++ log(L_IOCTL, "set txpower:%d, disabled:%d, flags:0x%04X\n", ++ vwrq->value, vwrq->disabled, vwrq->flags); ++ ++ acx_sem_lock(adev); ++ ++ if (vwrq->disabled != adev->tx_disabled) { ++ SET_BIT(adev->set_mask, GETSET_TX); ++ } ++ ++ adev->tx_disabled = vwrq->disabled; ++ if (vwrq->value == -1) { ++ if (vwrq->disabled) { ++ adev->tx_level_dbm = 0; ++ log(L_IOCTL, "disable radio tx\n"); ++ } else { ++ /* adev->tx_level_auto = 1; */ ++ log(L_IOCTL, "set tx power auto (NIY)\n"); ++ } ++ } else { ++ adev->tx_level_dbm = vwrq->value <= 20 ? vwrq->value : 20; ++ /* adev->tx_level_auto = 0; */ ++ log(L_IOCTL, "set txpower=%d dBm\n", adev->tx_level_dbm); ++ } ++ SET_BIT(adev->set_mask, GETSET_TXPOWER); ++ ++ result = -EINPROGRESS; ++ ++ acx_sem_unlock(adev); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_get_range ++*/ ++static int ++acx_ioctl_get_range( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_point *dwrq = &wrqu->data; ++ struct iw_range *range = (struct iw_range *)extra; ++ acx_device_t *adev = ndev2adev(ndev); ++ int i,n; ++ ++ FN_ENTER; ++ ++ if (!dwrq->pointer) ++ goto end; ++ ++ dwrq->length = sizeof(struct iw_range); ++ memset(range, 0, sizeof(struct iw_range)); ++ n = 0; ++ for (i = 1; i <= 14; i++) { ++ if (adev->reg_dom_chanmask & (1 << (i - 1))) { ++ range->freq[n].i = i; ++ range->freq[n].m = acx_channel_freq[i - 1] * 100000; ++ range->freq[n].e = 1; /* units are MHz */ ++ n++; ++ } ++ } ++ range->num_channels = n; ++ range->num_frequency = n; ++ ++ range->min_rts = 0; ++ range->max_rts = 2312; ++ ++#if ACX_FRAGMENTATION ++ range->min_frag = 256; ++ range->max_frag = 2312; ++#endif ++ ++ range->encoding_size[0] = 5; ++ range->encoding_size[1] = 13; ++ range->encoding_size[2] = 29; ++ range->num_encoding_sizes = 3; ++ range->max_encoding_tokens = 4; ++ ++ range->min_pmp = 0; ++ range->max_pmp = 5000000; ++ range->min_pmt = 0; ++ range->max_pmt = 65535 * 1000; ++ range->pmp_flags = IW_POWER_PERIOD; ++ range->pmt_flags = IW_POWER_TIMEOUT; ++ range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R; ++ ++ if (IS_ACX100(adev)) { /* ACX100 has direct radio programming - arbitrary levels, so offer a lot */ ++ for (i = 0; i <= IW_MAX_TXPOWER - 1; i++) ++ range->txpower[i] = 20 * i / (IW_MAX_TXPOWER - 1); ++ range->num_txpower = IW_MAX_TXPOWER; ++ range->txpower_capa = IW_TXPOW_DBM; ++ } ++ else { ++ int count = min(IW_MAX_TXPOWER, (int)adev->cfgopt_power_levels.len); ++ for (i = 0; i <= count; i++) ++ range->txpower[i] = adev->cfgopt_power_levels.list[i]; ++ range->num_txpower = count; ++ /* this list is given in mW */ ++ range->txpower_capa = IW_TXPOW_MWATT; ++ } ++ ++ range->we_version_compiled = WIRELESS_EXT; ++ range->we_version_source = 0x9; ++ ++ range->retry_capa = IW_RETRY_LIMIT; ++ range->retry_flags = IW_RETRY_LIMIT; ++ range->min_retry = 1; ++ range->max_retry = 255; ++ ++ range->r_time_flags = IW_RETRY_LIFETIME; ++ range->min_r_time = 0; ++ /* FIXME: lifetime ranges and orders of magnitude are strange?? */ ++ range->max_r_time = 65535; ++ ++ if (IS_USB(adev)) ++ range->sensitivity = 0; ++ else if (IS_ACX111(adev)) ++ range->sensitivity = 3; ++ else ++ range->sensitivity = 255; ++ ++ for (i=0; i < adev->rate_supported_len; i++) { ++ range->bitrate[i] = (adev->rate_supported[i] & ~0x80) * 500000; ++ /* never happens, but keep it, to be safe: */ ++ if (range->bitrate[i] == 0) ++ break; ++ } ++ range->num_bitrates = i; ++ ++ range->max_qual.qual = 100; ++ range->max_qual.level = 100; ++ range->max_qual.noise = 100; ++ /* TODO: better values */ ++ range->avg_qual.qual = 90; ++ range->avg_qual.level = 80; ++ range->avg_qual.noise = 2; ++ ++end: ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** Private functions ++*/ ++ ++/*********************************************************************** ++** acx_ioctl_get_nick ++*/ ++static inline int ++acx_ioctl_get_nick( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_point *dwrq = &wrqu->data; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ strcpy(extra, adev->nick); ++ dwrq->length = strlen(extra) + 1; ++ ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_nick ++*/ ++static int ++acx_ioctl_set_nick( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_point *dwrq = &wrqu->data; ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ if (dwrq->length > IW_ESSID_MAX_SIZE + 1) { ++ result = -E2BIG; ++ goto end_unlock; ++ } ++ ++ /* extra includes trailing \0, so it's ok */ ++ strcpy(adev->nick, extra); ++ result = OK; ++ ++end_unlock: ++ acx_sem_unlock(adev); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_get_retry ++*/ ++static int ++acx_ioctl_get_retry( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->retry; ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned int type = vwrq->flags & IW_RETRY_TYPE; ++ unsigned int modifier = vwrq->flags & IW_RETRY_MODIFIER; ++ int result; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ /* return the short retry number by default */ ++ if (type == IW_RETRY_LIFETIME) { ++ vwrq->flags = IW_RETRY_LIFETIME; ++ vwrq->value = adev->msdu_lifetime; ++ } else if (modifier == IW_RETRY_MAX) { ++ vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; ++ vwrq->value = adev->long_retry; ++ } else { ++ vwrq->flags = IW_RETRY_LIMIT; ++ if (adev->long_retry != adev->short_retry) ++ SET_BIT(vwrq->flags, IW_RETRY_MIN); ++ vwrq->value = adev->short_retry; ++ } ++ ++ /* can't be disabled */ ++ vwrq->disabled = (u8)0; ++ result = OK; ++ ++ acx_sem_unlock(adev); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_retry ++*/ ++static int ++acx_ioctl_set_retry( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->retry; ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ ++ FN_ENTER; ++ ++ if (!vwrq) { ++ result = -EFAULT; ++ goto end; ++ } ++ if (vwrq->disabled) { ++ result = -EINVAL; ++ goto end; ++ } ++ ++ acx_sem_lock(adev); ++ ++ result = -EINVAL; ++ if (IW_RETRY_LIMIT == (vwrq->flags & IW_RETRY_TYPE)) { ++ printk("old retry limits: short %d long %d\n", ++ adev->short_retry, adev->long_retry); ++ if (vwrq->flags & IW_RETRY_MAX) { ++ adev->long_retry = vwrq->value; ++ } else if (vwrq->flags & IW_RETRY_MIN) { ++ adev->short_retry = vwrq->value; ++ } else { ++ /* no modifier: set both */ ++ adev->long_retry = vwrq->value; ++ adev->short_retry = vwrq->value; ++ } ++ printk("new retry limits: short %d long %d\n", ++ adev->short_retry, adev->long_retry); ++ SET_BIT(adev->set_mask, GETSET_RETRY); ++ result = -EINPROGRESS; ++ } ++ else if (vwrq->flags & IW_RETRY_LIFETIME) { ++ adev->msdu_lifetime = vwrq->value; ++ printk("new MSDU lifetime: %d\n", adev->msdu_lifetime); ++ SET_BIT(adev->set_mask, SET_MSDU_LIFETIME); ++ result = -EINPROGRESS; ++ } ++ ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/************************ private ioctls ******************************/ ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_debug ++*/ ++#if ACX_DEBUG ++static int ++acx_ioctl_set_debug( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ unsigned int debug_new = *((unsigned int *)extra); ++ int result = -EINVAL; ++ ++ log(L_ANY, "setting debug from %04X to %04X\n", acx_debug, debug_new); ++ acx_debug = debug_new; ++ ++ result = OK; ++ return result; ++ ++} ++#endif ++ ++ ++/*********************************************************************** ++** acx_ioctl_list_reg_domain ++*/ ++static int ++acx_ioctl_list_reg_domain( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ int i = 1; ++ const char * const *entry = acx_reg_domain_strings; ++ ++ printk("dom# chan# domain/country\n"); ++ while (*entry) ++ printk("%4d %s\n", i++, *entry++); ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_reg_domain ++*/ ++static int ++acx_ioctl_set_reg_domain( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ ++ FN_ENTER; ++ ++ if ((*extra < 1) || ((size_t)*extra > acx_reg_domain_ids_len)) { ++ result = -EINVAL; ++ goto end; ++ } ++ ++ acx_sem_lock(adev); ++ ++ adev->reg_dom_id = acx_reg_domain_ids[*extra - 1]; ++ SET_BIT(adev->set_mask, GETSET_REG_DOMAIN); ++ ++ result = -EINPROGRESS; ++ ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_get_reg_domain ++*/ ++static int ++acx_ioctl_get_reg_domain( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int dom,i; ++ ++ /* no locking */ ++ dom = adev->reg_dom_id; ++ ++ for (i = 1; i <= acx_reg_domain_ids_len; i++) { ++ if (acx_reg_domain_ids[i-1] == dom) { ++ log(L_IOCTL, "regulatory domain is currently set " ++ "to %d (0x%X): %s\n", i, dom, ++ acx_reg_domain_strings[i-1]); ++ *extra = i; ++ break; ++ } ++ } ++ ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_short_preamble ++*/ ++static const char * const ++preamble_modes[] = { ++ "off", ++ "on", ++ "auto (peer capability dependent)", ++ "unknown mode, error" ++}; ++ ++static int ++acx_ioctl_set_short_preamble( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int i; ++ int result; ++ ++ FN_ENTER; ++ ++ if ((unsigned char)*extra > 2) { ++ result = -EINVAL; ++ goto end; ++ } ++ ++ acx_sem_lock(adev); ++ ++ adev->preamble_mode = (u8)*extra; ++ switch (adev->preamble_mode) { ++ case 0: /* long */ ++ adev->preamble_cur = 0; ++ break; ++ case 1: ++ /* short, kick incapable peers */ ++ adev->preamble_cur = 1; ++ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { ++ client_t *clt = &adev->sta_list[i]; ++ if (!clt->used) continue; ++ if (!(clt->cap_info & WF_MGMT_CAP_SHORT)) { ++ clt->used = CLIENT_EMPTY_SLOT_0; ++ } ++ } ++ switch (adev->mode) { ++ case ACX_MODE_2_STA: ++ if (adev->ap_client && !adev->ap_client->used) { ++ /* We kicked our AP :) */ ++ SET_BIT(adev->set_mask, GETSET_RESCAN); ++ } ++ } ++ break; ++ case 2: /* auto. short only if all peers are short-capable */ ++ adev->preamble_cur = 1; ++ for (i = 0; i < VEC_SIZE(adev->sta_list); i++) { ++ client_t *clt = &adev->sta_list[i]; ++ if (!clt->used) continue; ++ if (!(clt->cap_info & WF_MGMT_CAP_SHORT)) { ++ adev->preamble_cur = 0; ++ break; ++ } ++ } ++ break; ++ } ++ printk("new short preamble setting: configured %s, active %s\n", ++ preamble_modes[adev->preamble_mode], ++ preamble_modes[adev->preamble_cur]); ++ result = OK; ++ ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_get_short_preamble ++*/ ++static int ++acx_ioctl_get_short_preamble( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ acx_sem_lock(adev); ++ ++ printk("current short preamble setting: configured %s, active %s\n", ++ preamble_modes[adev->preamble_mode], ++ preamble_modes[adev->preamble_cur]); ++ ++ *extra = (char)adev->preamble_mode; ++ ++ acx_sem_unlock(adev); ++ ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_antenna ++** ++** TX and RX antenna can be set separately but this function good ++** for testing 0-4 bits ++*/ ++static int ++acx_ioctl_set_antenna( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ acx_sem_lock(adev); ++ ++ printk("old antenna value: 0x%02X (COMBINED bit mask)\n" ++ "Rx antenna selection:\n" ++ "0x00 ant. 1\n" ++ "0x40 ant. 2\n" ++ "0x80 full diversity\n" ++ "0xc0 partial diversity\n" ++ "0x0f dwell time mask (in units of us)\n" ++ "Tx antenna selection:\n" ++ "0x00 ant. 2\n" /* yep, those ARE reversed! */ ++ "0x20 ant. 1\n" ++ "new antenna value: 0x%02X\n", ++ adev->antenna, (u8)*extra); ++ ++ adev->antenna = (u8)*extra; ++ SET_BIT(adev->set_mask, GETSET_ANTENNA); ++ ++ acx_sem_unlock(adev); ++ ++ return -EINPROGRESS; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_get_antenna ++*/ ++static int ++acx_ioctl_get_antenna( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ /* no locking. it's pointless to lock a single load */ ++ printk("current antenna value: 0x%02X (COMBINED bit mask)\n" ++ "Rx antenna selection:\n" ++ "0x00 ant. 1\n" ++ "0x40 ant. 2\n" ++ "0x80 full diversity\n" ++ "0xc0 partial diversity\n" ++ "Tx antenna selection:\n" ++ "0x00 ant. 2\n" /* yep, those ARE reversed! */ ++ "0x20 ant. 1\n", adev->antenna); ++ ++ return 0; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_rx_antenna ++** ++** 0 = antenna1; 1 = antenna2; 2 = full diversity; 3 = partial diversity ++** Could anybody test which antenna is the external one? ++*/ ++static int ++acx_ioctl_set_rx_antenna( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ ++ FN_ENTER; ++ ++ if (*extra > 3) { ++ result = -EINVAL; ++ goto end; ++ } ++ ++ printk("old antenna value: 0x%02X\n", adev->antenna); ++ ++ acx_sem_lock(adev); ++ ++ adev->antenna &= 0x3f; ++ SET_BIT(adev->antenna, (*extra << 6)); ++ SET_BIT(adev->set_mask, GETSET_ANTENNA); ++ printk("new antenna value: 0x%02X\n", adev->antenna); ++ result = -EINPROGRESS; ++ ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_tx_antenna ++** ++** Arguments: 0 == antenna2; 1 == antenna1; ++** Could anybody test which antenna is the external one? ++*/ ++static int ++acx_ioctl_set_tx_antenna( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ ++ FN_ENTER; ++ ++ if (*extra > 1) { ++ result = -EINVAL; ++ goto end; ++ } ++ ++ printk("old antenna value: 0x%02X\n", adev->antenna); ++ ++ acx_sem_lock(adev); ++ ++ adev->antenna &= ~0x30; ++ SET_BIT(adev->antenna, ((*extra & 0x01) << 5)); ++ SET_BIT(adev->set_mask, GETSET_ANTENNA); ++ printk("new antenna value: 0x%02X\n", adev->antenna); ++ result = -EINPROGRESS; ++ ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_wlansniff ++** ++** can we just remove this in favor of monitor mode? --vda ++*/ ++static int ++acx_ioctl_wlansniff( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned int *params = (unsigned int*)extra; ++ unsigned int enable = (unsigned int)(params[0] > 0); ++ int result; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ /* not using printk() here, since it distorts kismet display ++ * when printk messages activated */ ++ log(L_IOCTL, "setting monitor to: 0x%02X\n", params[0]); ++ ++ switch (params[0]) { ++ case 0: ++ /* no monitor mode. hmm, should we simply ignore it ++ * or go back to enabling adev->netdev->type ARPHRD_ETHER? */ ++ break; ++ case 1: ++ adev->monitor_type = ARPHRD_IEEE80211_PRISM; ++ break; ++ case 2: ++ adev->monitor_type = ARPHRD_IEEE80211; ++ break; ++ } ++ ++ if (params[0]) { ++ adev->mode = ACX_MODE_MONITOR; ++ SET_BIT(adev->set_mask, GETSET_MODE); ++ } ++ ++ if (enable) { ++ adev->channel = params[1]; ++ SET_BIT(adev->set_mask, GETSET_RX); ++ } ++ result = -EINPROGRESS; ++ ++ acx_sem_unlock(adev); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_unknown11 ++** FIXME: looks like some sort of "iwpriv kick_sta MAC" but it's broken ++*/ ++static int ++acx_ioctl_unknown11( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++#ifdef BROKEN ++ struct iw_param *vwrq = &wrqu->param; ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ client_t client; ++ int result; ++ ++ acx_sem_lock(adev); ++ acx_lock(adev, flags); ++ ++ acx_l_transmit_disassoc(adev, &client); ++ result = OK; ++ ++ acx_unlock(adev, flags); ++ acx_sem_unlock(adev); ++ ++ return result; ++#endif ++ return -EINVAL; ++} ++ ++ ++/*********************************************************************** ++** debug helper function to be able to debug various issues relatively easily ++*/ ++static int ++acx_ioctl_dbg_set_masks( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ const unsigned int *params = (unsigned int*)extra; ++ int result; ++ ++ acx_sem_lock(adev); ++ ++ log(L_IOCTL, "setting flags in settings mask: " ++ "get_mask %08X set_mask %08X\n" ++ "before: get_mask %08X set_mask %08X\n", ++ params[0], params[1], ++ adev->get_mask, adev->set_mask); ++ SET_BIT(adev->get_mask, params[0]); ++ SET_BIT(adev->set_mask, params[1]); ++ log(L_IOCTL, "after: get_mask %08X set_mask %08X\n", ++ adev->get_mask, adev->set_mask); ++ result = -EINPROGRESS; /* immediately call commit handler */ ++ ++ acx_sem_unlock(adev); ++ ++ return result; ++} ++ ++ ++/*********************************************************************** ++* acx_ioctl_set_rates ++* ++* This ioctl takes string parameter. Examples: ++* iwpriv wlan0 SetRates "1,2" ++* use 1 and 2 Mbit rates, both are in basic rate set ++* iwpriv wlan0 SetRates "1,2 5,11" ++* use 1,2,5.5,11 Mbit rates. 1 and 2 are basic ++* iwpriv wlan0 SetRates "1,2 5c,11c" ++* same ('c' means 'CCK modulation' and it is a default for 5 and 11) ++* iwpriv wlan0 SetRates "1,2 5p,11p" ++* use 1,2,5.5,11 Mbit, 1,2 are basic. 5 and 11 are using PBCC ++* iwpriv wlan0 SetRates "1,2,5,11 22p" ++* use 1,2,5.5,11,22 Mbit. 1,2,5.5 and 11 are basic. 22 is using PBCC ++* (this is the maximum acx100 can do (modulo x4 mode)) ++* iwpriv wlan0 SetRates "1,2,5,11 22" ++* same. 802.11 defines only PBCC modulation ++* for 22 and 33 Mbit rates, so there is no ambiguity ++* iwpriv wlan0 SetRates "1,2,5,11 6o,9o,12o,18o,24o,36o,48o,54o" ++* 1,2,5.5 and 11 are basic. 11g OFDM rates are enabled but ++* they are not in basic rate set. 22 Mbit is disabled. ++* iwpriv wlan0 SetRates "1,2,5,11 6,9,12,18,24,36,48,54" ++* same. OFDM is default for 11g rates except 22 and 33 Mbit, ++* thus 'o' is optional ++* iwpriv wlan0 SetRates "1,2,5,11 6d,9d,12d,18d,24d,36d,48d,54d" ++* 1,2,5.5 and 11 are basic. 11g CCK-OFDM rates are enabled ++* (acx111 does not support CCK-OFDM, driver will reject this cmd) ++* iwpriv wlan0 SetRates "6,9,12 18,24,36,48,54" ++* 6,9,12 are basic, rest of 11g rates is enabled. Using OFDM ++*/ ++#include "setrate.c" ++ ++/* disallow: 33Mbit (unsupported by hw) */ ++/* disallow: CCKOFDM (unsupported by hw) */ ++static int ++acx111_supported(int mbit, int modulation, void *opaque) ++{ ++ if (mbit==33) return -ENOTSUPP; ++ if (modulation==DOT11_MOD_CCKOFDM) return -ENOTSUPP; ++ return OK; ++} ++ ++static const u16 ++acx111mask[] = { ++ [DOT11_RATE_1 ] = RATE111_1 , ++ [DOT11_RATE_2 ] = RATE111_2 , ++ [DOT11_RATE_5 ] = RATE111_5 , ++ [DOT11_RATE_11] = RATE111_11, ++ [DOT11_RATE_22] = RATE111_22, ++ /* [DOT11_RATE_33] = */ ++ [DOT11_RATE_6 ] = RATE111_6 , ++ [DOT11_RATE_9 ] = RATE111_9 , ++ [DOT11_RATE_12] = RATE111_12, ++ [DOT11_RATE_18] = RATE111_18, ++ [DOT11_RATE_24] = RATE111_24, ++ [DOT11_RATE_36] = RATE111_36, ++ [DOT11_RATE_48] = RATE111_48, ++ [DOT11_RATE_54] = RATE111_54, ++}; ++ ++static u32 ++acx111_gen_mask(int mbit, int modulation, void *opaque) ++{ ++ /* lower 16 bits show selected 1, 2, CCK and OFDM rates */ ++ /* upper 16 bits show selected PBCC rates */ ++ u32 m = acx111mask[rate_mbit2enum(mbit)]; ++ if (modulation==DOT11_MOD_PBCC) ++ return m<<16; ++ return m; ++} ++ ++static int ++verify_rate(u32 rate, int chip_type) ++{ ++ /* never happens. be paranoid */ ++ if (!rate) return -EINVAL; ++ ++ /* disallow: mixing PBCC and CCK at 5 and 11Mbit ++ ** (can be supported, but needs complicated handling in tx code) */ ++ if (( rate & ((RATE111_11+RATE111_5)<<16) ) ++ && ( rate & (RATE111_11+RATE111_5) ) ++ ) { ++ return -ENOTSUPP; ++ } ++ if (CHIPTYPE_ACX100 == chip_type) { ++ if ( rate & ~(RATE111_ACX100_COMPAT+(RATE111_ACX100_COMPAT<<16)) ) ++ return -ENOTSUPP; ++ } ++ return 0; ++} ++ ++static int ++acx_ioctl_set_rates(struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ int result; ++ u32 brate = 0, orate = 0; /* basic, operational rate set */ ++ ++ FN_ENTER; ++ ++ log(L_IOCTL, "set_rates %s\n", extra); ++ result = fill_ratemasks(extra, &brate, &orate, ++ acx111_supported, acx111_gen_mask, 0); ++ if (result) goto end; ++ SET_BIT(orate, brate); ++ log(L_IOCTL, "brate %08X orate %08X\n", brate, orate); ++ ++ result = verify_rate(brate, adev->chip_type); ++ if (result) goto end; ++ result = verify_rate(orate, adev->chip_type); ++ if (result) goto end; ++ ++ acx_sem_lock(adev); ++ acx_lock(adev, flags); ++ ++ adev->rate_basic = brate; ++ adev->rate_oper = orate; ++ /* TODO: ideally, we shall monitor highest basic rate ++ ** which was successfully sent to every peer ++ ** (say, last we checked, everybody could hear 5.5 Mbits) ++ ** and use that for bcasts when we want to reach all peers. ++ ** For beacons, we probably shall use lowest basic rate ++ ** because we want to reach all *potential* new peers too */ ++ adev->rate_bcast = 1 << lowest_bit(brate); ++ if (IS_ACX100(adev)) ++ adev->rate_bcast100 = acx_rate111to100(adev->rate_bcast); ++ adev->rate_auto = !has_only_one_bit(orate); ++ acx_l_update_client_rates(adev, orate); ++ /* TODO: get rid of ratevector, build it only when needed */ ++ acx_l_update_ratevector(adev); ++ ++ /* Do/don't do tx rate fallback; beacon contents and rate */ ++ SET_BIT(adev->set_mask, SET_RATE_FALLBACK|SET_TEMPLATES); ++ result = -EINPROGRESS; ++ ++ acx_unlock(adev, flags); ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_get_phy_chan_busy_percentage ++*/ ++static int ++acx_ioctl_get_phy_chan_busy_percentage( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ struct { ++ u16 type; ++ u16 len; ++ u32 busytime; ++ u32 totaltime; ++ } ACX_PACKED usage; ++ int result; ++ ++ acx_sem_lock(adev); ++ ++ if (OK != acx_s_interrogate(adev, &usage, ACX1xx_IE_MEDIUM_USAGE)) { ++ result = NOT_OK; ++ goto end_unlock; ++ } ++ ++ usage.busytime = le32_to_cpu(usage.busytime); ++ usage.totaltime = le32_to_cpu(usage.totaltime); ++ ++ /* yes, this is supposed to be "Medium" (singular of media), ++ not "average"! OK, reword the message to make it obvious... */ ++ printk("%s: busy percentage of medium (since last invocation): %d%% " ++ "(%u of %u microseconds)\n", ++ ndev->name, ++ usage.busytime / ((usage.totaltime / 100) + 1), ++ usage.busytime, usage.totaltime); ++ ++ result = OK; ++ ++end_unlock: ++ acx_sem_unlock(adev); ++ ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_ed_threshold ++*/ ++static inline int ++acx_ioctl_set_ed_threshold( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ acx_sem_lock(adev); ++ ++ printk("old ED threshold value: %d\n", adev->ed_threshold); ++ adev->ed_threshold = (unsigned char)*extra; ++ printk("new ED threshold value: %d\n", (unsigned char)*extra); ++ SET_BIT(adev->set_mask, GETSET_ED_THRESH); ++ ++ acx_sem_unlock(adev); ++ ++ return -EINPROGRESS; ++} ++ ++ ++/*********************************************************************** ++** acx_ioctl_set_cca ++*/ ++static inline int ++acx_ioctl_set_cca( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ ++ acx_sem_lock(adev); ++ ++ printk("old CCA value: 0x%02X\n", adev->cca); ++ adev->cca = (unsigned char)*extra; ++ printk("new CCA value: 0x%02X\n", (unsigned char)*extra); ++ SET_BIT(adev->set_mask, GETSET_CCA); ++ result = -EINPROGRESS; ++ ++ acx_sem_unlock(adev); ++ ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static const char * const ++scan_modes[] = { "active", "passive", "background" }; ++ ++static void ++acx_print_scan_params(acx_device_t *adev, const char* head) ++{ ++ printk("%s: %smode %d (%s), min chan time %dTU, " ++ "max chan time %dTU, max scan rate byte: %d\n", ++ adev->ndev->name, head, ++ adev->scan_mode, scan_modes[adev->scan_mode], ++ adev->scan_probe_delay, adev->scan_duration, adev->scan_rate); ++} ++ ++static int ++acx_ioctl_set_scan_params( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ const int *params = (int *)extra; ++ ++ acx_sem_lock(adev); ++ ++ acx_print_scan_params(adev, "old scan parameters: "); ++ if ((params[0] != -1) && (params[0] >= 0) && (params[0] <= 2)) ++ adev->scan_mode = params[0]; ++ if (params[1] != -1) ++ adev->scan_probe_delay = params[1]; ++ if (params[2] != -1) ++ adev->scan_duration = params[2]; ++ if ((params[3] != -1) && (params[3] <= 255)) ++ adev->scan_rate = params[3]; ++ acx_print_scan_params(adev, "new scan parameters: "); ++ SET_BIT(adev->set_mask, GETSET_RESCAN); ++ result = -EINPROGRESS; ++ ++ acx_sem_unlock(adev); ++ ++ return result; ++} ++ ++static int ++acx_ioctl_get_scan_params( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ int *params = (int *)extra; ++ ++ acx_sem_lock(adev); ++ ++ acx_print_scan_params(adev, "current scan parameters: "); ++ params[0] = adev->scan_mode; ++ params[1] = adev->scan_probe_delay; ++ params[2] = adev->scan_duration; ++ params[3] = adev->scan_rate; ++ result = OK; ++ ++ acx_sem_unlock(adev); ++ ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx100_ioctl_set_led_power( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ static const char * const led_modes[] = { "off", "on", "LinkQuality" }; ++ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result; ++ ++ acx_sem_lock(adev); ++ ++ printk("%s: power LED status: old %d (%s), ", ++ ndev->name, ++ adev->led_power, ++ led_modes[adev->led_power]); ++ adev->led_power = extra[0]; ++ if (adev->led_power > 2) adev->led_power = 2; ++ printk("new %d (%s)\n", ++ adev->led_power, ++ led_modes[adev->led_power]); ++ ++ if (adev->led_power == 2) { ++ printk("%s: max link quality setting: old %d, ", ++ ndev->name, adev->brange_max_quality); ++ if (extra[1]) ++ adev->brange_max_quality = extra[1]; ++ printk("new %d\n", adev->brange_max_quality); ++ } ++ ++ SET_BIT(adev->set_mask, GETSET_LED_POWER); ++ ++ result = -EINPROGRESS; ++ ++ acx_sem_unlock(adev); ++ ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++static inline int ++acx100_ioctl_get_led_power( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ acx_sem_lock(adev); ++ ++ extra[0] = adev->led_power; ++ if (adev->led_power == 2) ++ extra[1] = adev->brange_max_quality; ++ else ++ extra[1] = -1; ++ ++ acx_sem_unlock(adev); ++ ++ return OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx111_ioctl_info( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->param; ++ if (!IS_PCI(ndev2adev(ndev))) ++ return OK; ++ return acx111pci_ioctl_info(ndev, info, vwrq, extra); ++} ++ ++ ++/*********************************************************************** ++*/ ++static int ++acx100_ioctl_set_phy_amp_bias( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ union iwreq_data *wrqu, ++ char *extra) ++{ ++ struct iw_param *vwrq = &wrqu->param; ++ if (IS_USB(ndev2adev(ndev))) { ++ printk("acx: set_phy_amp_bias() is not supported on USB\n"); ++ return OK; ++ } ++#ifdef ACX_MEM ++ return acx100mem_ioctl_set_phy_amp_bias(ndev, info, vwrq, extra); ++#else ++ return acx100pci_ioctl_set_phy_amp_bias(ndev, info, vwrq, extra); ++#endif ++} ++ ++ ++/*********************************************************************** ++*/ ++static const iw_handler acx_ioctl_handler[] = ++{ ++ acx_ioctl_commit, /* SIOCSIWCOMMIT */ ++ acx_ioctl_get_name, /* SIOCGIWNAME */ ++ NULL, /* SIOCSIWNWID */ ++ NULL, /* SIOCGIWNWID */ ++ acx_ioctl_set_freq, /* SIOCSIWFREQ */ ++ acx_ioctl_get_freq, /* SIOCGIWFREQ */ ++ acx_ioctl_set_mode, /* SIOCSIWMODE */ ++ acx_ioctl_get_mode, /* SIOCGIWMODE */ ++ acx_ioctl_set_sens, /* SIOCSIWSENS */ ++ acx_ioctl_get_sens, /* SIOCGIWSENS */ ++ NULL, /* SIOCSIWRANGE */ ++ acx_ioctl_get_range, /* SIOCGIWRANGE */ ++ NULL, /* SIOCSIWPRIV */ ++ NULL, /* SIOCGIWPRIV */ ++ NULL, /* SIOCSIWSTATS */ ++ NULL, /* SIOCGIWSTATS */ ++#if IW_HANDLER_VERSION > 4 ++ iw_handler_set_spy, /* SIOCSIWSPY */ ++ iw_handler_get_spy, /* SIOCGIWSPY */ ++ iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ ++ iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ ++#else /* IW_HANDLER_VERSION > 4 */ ++#ifdef WIRELESS_SPY ++ NULL /* acx_ioctl_set_spy FIXME */, /* SIOCSIWSPY */ ++ NULL /* acx_ioctl_get_spy */, /* SIOCGIWSPY */ ++#else /* WSPY */ ++ NULL, /* SIOCSIWSPY */ ++ NULL, /* SIOCGIWSPY */ ++#endif /* WSPY */ ++ NULL, /* [nothing] */ ++ NULL, /* [nothing] */ ++#endif /* IW_HANDLER_VERSION > 4 */ ++ acx_ioctl_set_ap, /* SIOCSIWAP */ ++ acx_ioctl_get_ap, /* SIOCGIWAP */ ++ NULL, /* [nothing] */ ++ acx_ioctl_get_aplist, /* SIOCGIWAPLIST */ ++ acx_ioctl_set_scan, /* SIOCSIWSCAN */ ++ acx_ioctl_get_scan, /* SIOCGIWSCAN */ ++ acx_ioctl_set_essid, /* SIOCSIWESSID */ ++ acx_ioctl_get_essid, /* SIOCGIWESSID */ ++ acx_ioctl_set_nick, /* SIOCSIWNICKN */ ++ acx_ioctl_get_nick, /* SIOCGIWNICKN */ ++ NULL, /* [nothing] */ ++ NULL, /* [nothing] */ ++ acx_ioctl_set_rate, /* SIOCSIWRATE */ ++ acx_ioctl_get_rate, /* SIOCGIWRATE */ ++ acx_ioctl_set_rts, /* SIOCSIWRTS */ ++ acx_ioctl_get_rts, /* SIOCGIWRTS */ ++#if ACX_FRAGMENTATION ++ acx_ioctl_set_frag, /* SIOCSIWFRAG */ ++ acx_ioctl_get_frag, /* SIOCGIWFRAG */ ++#else ++ NULL, /* SIOCSIWFRAG */ ++ NULL, /* SIOCGIWFRAG */ ++#endif ++ acx_ioctl_set_txpow, /* SIOCSIWTXPOW */ ++ acx_ioctl_get_txpow, /* SIOCGIWTXPOW */ ++ acx_ioctl_set_retry, /* SIOCSIWRETRY */ ++ acx_ioctl_get_retry, /* SIOCGIWRETRY */ ++ acx_ioctl_set_encode, /* SIOCSIWENCODE */ ++ acx_ioctl_get_encode, /* SIOCGIWENCODE */ ++ acx_ioctl_set_power, /* SIOCSIWPOWER */ ++ acx_ioctl_get_power, /* SIOCGIWPOWER */ ++}; ++ ++ ++/*********************************************************************** ++*/ ++ ++/* if you plan to reorder something, make sure to reorder all other places ++ * accordingly! */ ++/* SET/GET convention: SETs must have even position, GETs odd */ ++#define ACX100_IOCTL SIOCIWFIRSTPRIV ++enum { ++ ACX100_IOCTL_DEBUG = ACX100_IOCTL, ++ ACX100_IOCTL_GET__________UNUSED1, ++ ACX100_IOCTL_SET_PLED, ++ ACX100_IOCTL_GET_PLED, ++ ACX100_IOCTL_SET_RATES, ++ ACX100_IOCTL_LIST_DOM, ++ ACX100_IOCTL_SET_DOM, ++ ACX100_IOCTL_GET_DOM, ++ ACX100_IOCTL_SET_SCAN_PARAMS, ++ ACX100_IOCTL_GET_SCAN_PARAMS, ++ ACX100_IOCTL_SET_PREAMB, ++ ACX100_IOCTL_GET_PREAMB, ++ ACX100_IOCTL_SET_ANT, ++ ACX100_IOCTL_GET_ANT, ++ ACX100_IOCTL_RX_ANT, ++ ACX100_IOCTL_TX_ANT, ++ ACX100_IOCTL_SET_PHY_AMP_BIAS, ++ ACX100_IOCTL_GET_PHY_CHAN_BUSY, ++ ACX100_IOCTL_SET_ED, ++ ACX100_IOCTL_GET__________UNUSED3, ++ ACX100_IOCTL_SET_CCA, ++ ACX100_IOCTL_GET__________UNUSED4, ++ ACX100_IOCTL_MONITOR, ++ ACX100_IOCTL_TEST, ++ ACX100_IOCTL_DBG_SET_MASKS, ++ ACX111_IOCTL_INFO, ++ ACX100_IOCTL_DBG_SET_IO, ++ ACX100_IOCTL_DBG_GET_IO ++}; ++ ++ ++static const iw_handler acx_ioctl_private_handler[] = ++{ ++#if ACX_DEBUG ++[ACX100_IOCTL_DEBUG - ACX100_IOCTL] = acx_ioctl_set_debug, ++#endif ++[ACX100_IOCTL_SET_PLED - ACX100_IOCTL] = acx100_ioctl_set_led_power, ++[ACX100_IOCTL_GET_PLED - ACX100_IOCTL] = acx100_ioctl_get_led_power, ++[ACX100_IOCTL_SET_RATES - ACX100_IOCTL] = acx_ioctl_set_rates, ++[ACX100_IOCTL_LIST_DOM - ACX100_IOCTL] = acx_ioctl_list_reg_domain, ++[ACX100_IOCTL_SET_DOM - ACX100_IOCTL] = acx_ioctl_set_reg_domain, ++[ACX100_IOCTL_GET_DOM - ACX100_IOCTL] = acx_ioctl_get_reg_domain, ++[ACX100_IOCTL_SET_SCAN_PARAMS - ACX100_IOCTL] = acx_ioctl_set_scan_params, ++[ACX100_IOCTL_GET_SCAN_PARAMS - ACX100_IOCTL] = acx_ioctl_get_scan_params, ++[ACX100_IOCTL_SET_PREAMB - ACX100_IOCTL] = acx_ioctl_set_short_preamble, ++[ACX100_IOCTL_GET_PREAMB - ACX100_IOCTL] = acx_ioctl_get_short_preamble, ++[ACX100_IOCTL_SET_ANT - ACX100_IOCTL] = acx_ioctl_set_antenna, ++[ACX100_IOCTL_GET_ANT - ACX100_IOCTL] = acx_ioctl_get_antenna, ++[ACX100_IOCTL_RX_ANT - ACX100_IOCTL] = acx_ioctl_set_rx_antenna, ++[ACX100_IOCTL_TX_ANT - ACX100_IOCTL] = acx_ioctl_set_tx_antenna, ++[ACX100_IOCTL_SET_PHY_AMP_BIAS - ACX100_IOCTL] = acx100_ioctl_set_phy_amp_bias, ++[ACX100_IOCTL_GET_PHY_CHAN_BUSY - ACX100_IOCTL] = acx_ioctl_get_phy_chan_busy_percentage, ++[ACX100_IOCTL_SET_ED - ACX100_IOCTL] = acx_ioctl_set_ed_threshold, ++[ACX100_IOCTL_SET_CCA - ACX100_IOCTL] = acx_ioctl_set_cca, ++[ACX100_IOCTL_MONITOR - ACX100_IOCTL] = acx_ioctl_wlansniff, ++[ACX100_IOCTL_TEST - ACX100_IOCTL] = acx_ioctl_unknown11, ++[ACX100_IOCTL_DBG_SET_MASKS - ACX100_IOCTL] = acx_ioctl_dbg_set_masks, ++[ACX111_IOCTL_INFO - ACX100_IOCTL] = acx111_ioctl_info, ++}; ++ ++ ++static const struct iw_priv_args acx_ioctl_private_args[] = { ++#if ACX_DEBUG ++{ cmd : ACX100_IOCTL_DEBUG, ++ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, ++ get_args : 0, ++ name : "SetDebug" }, ++#endif ++{ cmd : ACX100_IOCTL_SET_PLED, ++ set_args : IW_PRIV_TYPE_BYTE | 2, ++ get_args : 0, ++ name : "SetLEDPower" }, ++{ cmd : ACX100_IOCTL_GET_PLED, ++ set_args : 0, ++ get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 2, ++ name : "GetLEDPower" }, ++{ cmd : ACX100_IOCTL_SET_RATES, ++ set_args : IW_PRIV_TYPE_CHAR | 256, ++ get_args : 0, ++ name : "SetRates" }, ++{ cmd : ACX100_IOCTL_LIST_DOM, ++ set_args : 0, ++ get_args : 0, ++ name : "ListRegDomain" }, ++{ cmd : ACX100_IOCTL_SET_DOM, ++ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, ++ get_args : 0, ++ name : "SetRegDomain" }, ++{ cmd : ACX100_IOCTL_GET_DOM, ++ set_args : 0, ++ get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, ++ name : "GetRegDomain" }, ++{ cmd : ACX100_IOCTL_SET_SCAN_PARAMS, ++ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, ++ get_args : 0, ++ name : "SetScanParams" }, ++{ cmd : ACX100_IOCTL_GET_SCAN_PARAMS, ++ set_args : 0, ++ get_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, ++ name : "GetScanParams" }, ++{ cmd : ACX100_IOCTL_SET_PREAMB, ++ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, ++ get_args : 0, ++ name : "SetSPreamble" }, ++{ cmd : ACX100_IOCTL_GET_PREAMB, ++ set_args : 0, ++ get_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, ++ name : "GetSPreamble" }, ++{ cmd : ACX100_IOCTL_SET_ANT, ++ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, ++ get_args : 0, ++ name : "SetAntenna" }, ++{ cmd : ACX100_IOCTL_GET_ANT, ++ set_args : 0, ++ get_args : 0, ++ name : "GetAntenna" }, ++{ cmd : ACX100_IOCTL_RX_ANT, ++ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, ++ get_args : 0, ++ name : "SetRxAnt" }, ++{ cmd : ACX100_IOCTL_TX_ANT, ++ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, ++ get_args : 0, ++ name : "SetTxAnt" }, ++{ cmd : ACX100_IOCTL_SET_PHY_AMP_BIAS, ++ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, ++ get_args : 0, ++ name : "SetPhyAmpBias"}, ++{ cmd : ACX100_IOCTL_GET_PHY_CHAN_BUSY, ++ set_args : 0, ++ get_args : 0, ++ name : "GetPhyChanBusy" }, ++{ cmd : ACX100_IOCTL_SET_ED, ++ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, ++ get_args : 0, ++ name : "SetED" }, ++{ cmd : ACX100_IOCTL_SET_CCA, ++ set_args : IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, ++ get_args : 0, ++ name : "SetCCA" }, ++{ cmd : ACX100_IOCTL_MONITOR, ++ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, ++ get_args : 0, ++ name : "monitor" }, ++{ cmd : ACX100_IOCTL_TEST, ++ set_args : 0, ++ get_args : 0, ++ name : "Test" }, ++{ cmd : ACX100_IOCTL_DBG_SET_MASKS, ++ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, ++ get_args : 0, ++ name : "DbgSetMasks" }, ++{ cmd : ACX111_IOCTL_INFO, ++ set_args : 0, ++ get_args : 0, ++ name : "GetAcx111Info" }, ++{ cmd : ACX100_IOCTL_DBG_SET_IO, ++ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, ++ get_args : 0, ++ name : "DbgSetIO" }, ++{ cmd : ACX100_IOCTL_DBG_GET_IO, ++ set_args : IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3, ++ get_args : 0, ++ name : "DbgGetIO" }, ++}; ++ ++ ++const struct iw_handler_def acx_ioctl_handler_def = ++{ ++ .num_standard = VEC_SIZE(acx_ioctl_handler), ++ .num_private = VEC_SIZE(acx_ioctl_private_handler), ++ .num_private_args = VEC_SIZE(acx_ioctl_private_args), ++ .standard = (iw_handler *) acx_ioctl_handler, ++ .private = (iw_handler *) acx_ioctl_private_handler, ++ .private_args = (struct iw_priv_args *) acx_ioctl_private_args, ++#if IW_HANDLER_VERSION > 5 ++ .get_wireless_stats = acx_e_get_wireless_stats ++#endif /* IW > 5 */ ++}; +Index: linux-2.6.23/drivers/net/wireless/acx/Kconfig +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/Kconfig 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,113 @@ ++config ACX ++ tristate "TI acx100/acx111 802.11b/g wireless chipsets" ++ depends on NET_RADIO && EXPERIMENTAL ++ select FW_LOADER ++ ---help--- ++ A driver for 802.11b/g wireless cards based on ++ Texas Instruments acx100 and acx111 chipsets. ++ ++ This driver supports Host AP mode that allows ++ your computer to act as an IEEE 802.11 access point. ++ This driver is new and experimental. ++ ++ Texas Instruments did not take part in development of this driver ++ in any way, shape or form. ++ ++ The driver can be compiled as a module and will be named "acx". ++ ++config ACX_PCI ++ bool "TI acx100/acx111 802.11b/g PCI" ++ depends on ACX && PCI ++ ---help--- ++ Include PCI and CardBus support in acx. ++ ++ acx chipsets need their firmware loaded at startup. ++ You will need to provide a firmware image via hotplug. ++ ++ Firmware may be in a form of single image 40-100kb in size ++ (a 'combined' firmware) or two images - main image ++ (again 40-100kb) and radio image (~10kb or less). ++ ++ Firmware images are requested from hotplug using following names: ++ ++ tiacx100 - main firmware image for acx100 chipset ++ tiacx100rNN - radio acx100 firmware for radio type NN ++ tiacx100cNN - combined acx100 firmware for radio type NN ++ tiacx111 - main acx111 firmware ++ tiacx111rNN - radio acx111 firmware for radio type NN ++ tiacx111cNN - combined acx111 firmware for radio type NN ++ ++ Driver will attempt to load combined image first. ++ If no such image is found, it will try to load main image ++ and radio image instead. ++ ++ Firmware files are not covered by GPL and are not distributed ++ with this driver for legal reasons. ++ ++config ACX_USB ++ bool "TI acx100/acx111 802.11b/g USB" ++ depends on ACX && (USB=y || USB=ACX) ++ ---help--- ++ Include USB support in acx. ++ ++ There is only one currently known device in this category, ++ D-Link DWL-120+, but newer devices seem to be on the horizon. ++ ++ acx chipsets need their firmware loaded at startup. ++ You will need to provide a firmware image via hotplug. ++ ++ Firmware for USB device is requested from hotplug ++ by the 'tiacx100usb' name. ++ ++ Firmware files are not covered by GPL and are not distributed ++ with this driver for legal reasons. ++ ++config ACX_MEM ++ bool "TI acx100/acx111 802.11b/g memory mapped slave 16 interface" ++ depends on ACX ++ ---help--- ++ acx chipsets need their firmware loaded at startup. ++ You will need to provide a firmware image via hotplug. ++ ++ Firmware for USB device is requested from hotplug ++ by the 'tiacx100usb' name. ++ ++ Firmware files are not covered by GPL and are not distributed ++ with this driver for legal reasons. ++ ++config ACX_CS ++ bool "TI acx100/acx111 802.11b/g cardbus interface" ++ depends on ACX ++ ---help--- ++ acx chipsets need their firmware loaded at startup. ++ You will need to provide a firmware image via hotplug. ++ ++ This driver is based on memory mapped driver. ++ ++ Firmware files are not covered by GPL and are not distributed ++ with this driver for legal reasons. ++ ++config ACX_HX4700 ++ tristate "ACX support for the iPAQ hx4700 using ACX_MEM" ++ depends on HX4700_CORE && ACX_MEM ++ ---help--- ++ Include memory interface support in acx for the iPAQ hx4700. ++ ++config ACX_HTCUNIVERSAL ++ tristate "ACX support for the HTC Universal using ACX_MEM" ++ depends on HTCUNIVERSAL_CORE && HTC_ASIC3 && ACX_MEM ++ ---help--- ++ Include memory interface support in acx for the HTC Universal. ++ ++config ACX_HTCSABLE ++ tristate "ACX support for the HTC Sable (IPAQ hw6915) using ACX_MEM" ++ depends on MACH_HW6900 && HTC_ASIC3 && ACX_MEM ++ ---help--- ++ Include memory interface support in acx for the HTC Sable (IPAQ hw6915). ++ ++config ACX_RX3000 ++ tristate "ACX support for the iPAQ RX3000 using ACX_MEM" ++ depends on MACH_RX3715 && ACX_MEM && LEDS_ASIC3 ++ ---help--- ++ Include memory interface support in acx for the IPAQ RX3000. ++ +Index: linux-2.6.23/drivers/net/wireless/acx/Makefile +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/Makefile 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,21 @@ ++#obj-m += acx.o ++ ++#acx-obj-y += pci.o ++#acx-obj-y += usb.o ++ ++#acx-objs := wlan.o conv.o ioctl.o common.o $(acx-obj-y) ++ ++# Use this if you have proper Kconfig integration: ++ ++obj-$(CONFIG_ACX) += acx.o ++obj-$(CONFIG_ACX_HX4700) += hx4700_acx.o ++obj-$(CONFIG_ACX_HTCUNIVERSAL) += htcuniversal_acx.o ++obj-$(CONFIG_ACX_HTCSABLE) += htcsable_acx.o ++obj-$(CONFIG_ACX_RX3000) += rx3000_acx.o ++# ++acx-obj-$(CONFIG_ACX_PCI) += pci.o ++acx-obj-$(CONFIG_ACX_USB) += usb.o ++acx-obj-$(CONFIG_ACX_MEM) += mem.o ++acx-obj-$(CONFIG_ACX_CS) += cs.o ++# ++acx-objs := wlan.o conv.o ioctl.o common.o $(acx-obj-y) +Index: linux-2.6.23/drivers/net/wireless/acx/mem.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/mem.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,5363 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++** ++** Slave memory interface support: ++** ++** Todd Blumer - SDG Systems ++** Bill Reese - HP ++** Eric McCorkle - Shadowsun ++*/ ++#define ACX_MEM 1 ++ ++/* ++ * non-zero makes it dump the ACX memory to the console then ++ * panic when you cat /proc/driver/acx_wlan0_diag ++ */ ++#define DUMP_MEM_DEFINED 1 ++ ++#define DUMP_MEM_DURING_DIAG 0 ++#define DUMP_IF_SLOW 0 ++ ++#define PATCH_AROUND_BAD_SPOTS 1 ++#define HX4700_FIRMWARE_CHECKSUM 0x0036862e ++#define HX4700_ALTERNATE_FIRMWARE_CHECKSUM 0x00368a75 ++ ++#include ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) ++#include ++#endif ++ ++/* Linux 2.6.18+ uses */ ++#ifndef UTS_RELEASE ++#include ++#endif ++ ++#include /* required for Lx 2.6.8 ?? */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "acx.h" ++#include "acx_hw.h" ++ ++/*********************************************************************** ++*/ ++ ++#define CARD_EEPROM_ID_SIZE 6 ++ ++#include ++ ++#define REG_ACX_VENDOR_ID 0x900 ++/* ++ * This is the vendor id on the HX4700, anyway ++ */ ++#define ACX_VENDOR_ID 0x8400104c ++ ++typedef enum { ++ ACX_SOFT_RESET = 0, ++ ++ ACX_SLV_REG_ADDR, ++ ACX_SLV_REG_DATA, ++ ACX_SLV_REG_ADATA, ++ ++ ACX_SLV_MEM_CP, ++ ACX_SLV_MEM_ADDR, ++ ACX_SLV_MEM_DATA, ++ ACX_SLV_MEM_CTL, ++} acxreg_t; ++ ++/*********************************************************************** ++*/ ++static void acxmem_i_tx_timeout(struct net_device *ndev); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) ++static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id); ++#else ++static irqreturn_t acxmem_i_interrupt(int irq, void *dev_id, struct pt_regs *regs); ++#endif ++static void acxmem_i_set_multicast_list(struct net_device *ndev); ++ ++static int acxmem_e_open(struct net_device *ndev); ++static int acxmem_e_close(struct net_device *ndev); ++static void acxmem_s_up(struct net_device *ndev); ++static void acxmem_s_down(struct net_device *ndev); ++ ++static void dump_acxmem (acx_device_t *adev, u32 start, int length); ++static int acxmem_complete_hw_reset (acx_device_t *adev); ++static void acxmem_s_delete_dma_regions(acx_device_t *adev); ++ ++static struct platform_device *resume_pdev; ++ ++static int ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) ++acxmem_e_suspend(struct platform_device *pdev, pm_message_t state); ++#else ++acxmem_e_suspend(struct device *pdev, u32 state); ++#endif ++static void ++fw_resumer(struct work_struct *notused); ++//fw_resumer( void *data ); ++ ++static int acx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) ++{ ++ struct net_device *ndev = ptr; ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ /* ++ * Upper level ioctl() handlers send a NETDEV_CHANGEADDR if the MAC address changes. ++ */ ++ ++ if (NETDEV_CHANGEADDR == event) { ++ /* ++ * the upper layers put the new MAC address in ndev->dev_addr; we just copy ++ * it over and update the ACX with it. ++ */ ++ MAC_COPY(adev->dev_addr, adev->ndev->dev_addr); ++ adev->set_mask |= GETSET_STATION_ID; ++ acx_s_update_card_settings (adev); ++ } ++ ++ return 0; ++} ++ ++static struct notifier_block acx_netdev_notifier = { ++ .notifier_call = acx_netdev_event, ++}; ++ ++/*********************************************************************** ++** Register access ++*/ ++ ++/* Pick one */ ++/* #define INLINE_IO static */ ++#define INLINE_IO static inline ++ ++INLINE_IO u32 ++read_id_register (acx_device_t *adev) ++{ ++ writel (0x24, &adev->iobase[ACX_SLV_REG_ADDR]); ++ return readl (&adev->iobase[ACX_SLV_REG_DATA]); ++} ++ ++INLINE_IO u32 ++read_reg32(acx_device_t *adev, unsigned int offset) ++{ ++ u32 val; ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) { ++ return readl(((u8*)adev->iobase) + addr); ++ } ++ ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ val = readl( &adev->iobase[ACX_SLV_REG_DATA] ); ++ ++ return val; ++} ++ ++INLINE_IO u16 ++read_reg16(acx_device_t *adev, unsigned int offset) ++{ ++ u16 lo; ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) { ++ return readw(((u8 *) adev->iobase) + addr); ++ } ++ ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ lo = readw( (u16 *)&adev->iobase[ACX_SLV_REG_DATA] ); ++ ++ return lo; ++} ++ ++INLINE_IO u8 ++read_reg8(acx_device_t *adev, unsigned int offset) ++{ ++ u8 lo; ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) ++ return readb(((u8 *)adev->iobase) + addr); ++ ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ lo = readw( (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); ++ ++ return (u8)lo; ++} ++ ++INLINE_IO void ++write_reg32(acx_device_t *adev, unsigned int offset, u32 val) ++{ ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) { ++ writel(val, ((u8*)adev->iobase) + addr); ++ return; ++ } ++ ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ writel( val, &adev->iobase[ACX_SLV_REG_DATA] ); ++} ++ ++INLINE_IO void ++write_reg16(acx_device_t *adev, unsigned int offset, u16 val) ++{ ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) { ++ writew(val, ((u8 *)adev->iobase) + addr); ++ return; ++ } ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ writew( val, (u16 *) &adev->iobase[ACX_SLV_REG_DATA] ); ++} ++ ++INLINE_IO void ++write_reg8(acx_device_t *adev, unsigned int offset, u8 val) ++{ ++ u32 addr; ++ ++ if (offset > IO_ACX_ECPU_CTRL) ++ addr = offset; ++ else ++ addr = adev->io[offset]; ++ ++ if (addr < 0x20) { ++ writeb(val, ((u8 *) adev->iobase) + addr); ++ return; ++ } ++ writel( addr, &adev->iobase[ACX_SLV_REG_ADDR] ); ++ writeb( val, (u8 *)&adev->iobase[ACX_SLV_REG_DATA] ); ++} ++ ++/* Handle PCI posting properly: ++ * Make sure that writes reach the adapter in case they require to be executed ++ * *before* the next write, by reading a random (and safely accessible) register. ++ * This call has to be made if there is no read following (which would flush the data ++ * to the adapter), yet the written data has to reach the adapter immediately. */ ++INLINE_IO void ++write_flush(acx_device_t *adev) ++{ ++ /* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */ ++ /* faster version (accesses the first register, IO_ACX_SOFT_RESET, ++ * which should also be safe): */ ++ (void) readl(adev->iobase); ++} ++ ++INLINE_IO void ++set_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { ++ u32 tmp; ++ ++ tmp = read_reg32 (adev, offset); ++ tmp = tmp | bits; ++ write_reg32 (adev, offset, tmp); ++ write_flush (adev); ++} ++ ++INLINE_IO void ++clear_regbits (acx_device_t *adev, unsigned int offset, u32 bits) { ++ u32 tmp; ++ ++ tmp = read_reg32 (adev, offset); ++ tmp = tmp & ~bits; ++ write_reg32 (adev, offset, tmp); ++ write_flush (adev); ++} ++ ++/* ++ * Copy from PXA memory to the ACX memory. This assumes both the PXA and ACX ++ * addresses are 32 bit aligned. Count is in bytes. ++ */ ++INLINE_IO void ++write_slavemem32 (acx_device_t *adev, u32 slave_address, u32 val) ++{ ++ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); ++ udelay (10); ++ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, val); ++} ++ ++INLINE_IO u32 ++read_slavemem32 (acx_device_t *adev, u32 slave_address) ++{ ++ u32 val; ++ ++ write_reg32 (adev, IO_ACX_SLV_MEM_CTL, 0x0); ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, slave_address); ++ udelay (10); ++ val = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); ++ ++ return val; ++} ++ ++INLINE_IO void ++write_slavemem8 (acx_device_t *adev, u32 slave_address, u8 val) ++{ ++ u32 data; ++ u32 base; ++ int offset; ++ ++ /* ++ * Get the word containing the target address and the byte offset in that word. ++ */ ++ base = slave_address & ~3; ++ offset = (slave_address & 3) * 8; ++ ++ data = read_slavemem32 (adev, base); ++ data &= ~(0xff << offset); ++ data |= val << offset; ++ write_slavemem32 (adev, base, data); ++} ++ ++INLINE_IO u8 ++read_slavemem8 (acx_device_t *adev, u32 slave_address) ++{ ++ u8 val; ++ u32 base; ++ u32 data; ++ int offset; ++ ++ base = slave_address & ~3; ++ offset = (slave_address & 3) * 8; ++ ++ data = read_slavemem32 (adev, base); ++ ++ val = (data >> offset) & 0xff; ++ ++ return val; ++} ++ ++/* ++ * doesn't split across word boundaries ++ */ ++INLINE_IO void ++write_slavemem16 (acx_device_t *adev, u32 slave_address, u16 val) ++{ ++ u32 data; ++ u32 base; ++ int offset; ++ ++ /* ++ * Get the word containing the target address and the byte offset in that word. ++ */ ++ base = slave_address & ~3; ++ offset = (slave_address & 3) * 8; ++ ++ data = read_slavemem32 (adev, base); ++ data &= ~(0xffff << offset); ++ data |= val << offset; ++ write_slavemem32 (adev, base, data); ++} ++ ++/* ++ * doesn't split across word boundaries ++ */ ++INLINE_IO u16 ++read_slavemem16 (acx_device_t *adev, u32 slave_address) ++{ ++ u16 val; ++ u32 base; ++ u32 data; ++ int offset; ++ ++ base = slave_address & ~3; ++ offset = (slave_address & 3) * 8; ++ ++ data = read_slavemem32 (adev, base); ++ ++ val = (data >> offset) & 0xffff; ++ ++ return val; ++} ++ ++/* ++ * Copy from slave memory ++ * ++ * TODO - rewrite using address autoincrement, handle partial words ++ */ ++void ++copy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) { ++ u32 tmp = 0; ++ u8 *ptmp = (u8 *) &tmp; ++ ++ /* ++ * Right now I'm making the assumption that the destination is aligned, but ++ * I'd better check. ++ */ ++ if ((u32) destination & 3) { ++ printk ("acx copy_from_slavemem: warning! destination not word-aligned!\n"); ++ } ++ ++ while (count >= 4) { ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); ++ udelay (10); ++ *((u32 *) destination) = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); ++ count -= 4; ++ source += 4; ++ destination += 4; ++ } ++ ++ /* ++ * If the word reads above didn't satisfy the count, read one more word ++ * and transfer a byte at a time until the request is satisfied. ++ */ ++ if (count) { ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, source); ++ udelay (10); ++ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); ++ while (count--) { ++ *destination++ = *ptmp++; ++ } ++ } ++} ++ ++/* ++ * Copy to slave memory ++ * ++ * TODO - rewrite using autoincrement, handle partial words ++ */ ++void ++copy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) ++{ ++ u32 tmp = 0; ++ u8* ptmp = (u8 *) &tmp; ++ static u8 src[512]; /* make static to avoid huge stack objects */ ++ ++ /* ++ * For now, make sure the source is word-aligned by copying it to a word-aligned ++ * buffer. Someday rewrite to avoid the extra copy. ++ */ ++ if (count > sizeof (src)) { ++ printk ("acx copy_to_slavemem: Warning! buffer overflow!\n"); ++ count = sizeof (src); ++ } ++ memcpy (src, source, count); ++ source = src; ++ ++ while (count >= 4) { ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); ++ udelay (10); ++ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, *((u32 *) source)); ++ count -= 4; ++ source += 4; ++ destination += 4; ++ } ++ ++ /* ++ * If there are leftovers read the next word from the acx and merge in ++ * what they want to write. ++ */ ++ if (count) { ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); ++ udelay (10); ++ tmp = read_reg32 (adev, IO_ACX_SLV_MEM_DATA); ++ while (count--) { ++ *ptmp++ = *source++; ++ } ++ /* ++ * reset address in case we're currently in auto-increment mode ++ */ ++ write_reg32 (adev, IO_ACX_SLV_MEM_ADDR, destination); ++ udelay (10); ++ write_reg32 (adev, IO_ACX_SLV_MEM_DATA, tmp); ++ udelay (10); ++ } ++ ++} ++ ++/* ++ * Block copy to slave buffers using memory block chain mode. Copies to the ACX ++ * transmit buffer structure with minimal intervention on our part. ++ * Interrupts should be disabled when calling this. ++ */ ++void ++chaincopy_to_slavemem (acx_device_t *adev, u32 destination, u8 *source, int count) ++{ ++ u32 val; ++ u32 *data = (u32 *) source; ++ static u8 aligned_source[WLAN_A4FR_MAXLEN_WEP_FCS]; ++ ++ /* ++ * Warn if the pointers don't look right. Destination must fit in [23:5] with ++ * zero elsewhere and source should be 32 bit aligned. ++ * This should never happen since we're in control of both, but I want to know about ++ * it if it does. ++ */ ++ if ((destination & 0x00ffffe0) != destination) { ++ printk ("acx chaincopy: destination block 0x%04x not aligned!\n", destination); ++ } ++ if (count > sizeof aligned_source) { ++ printk( KERN_ERR "chaincopy_to_slavemem overflow!\n" ); ++ count = sizeof aligned_source; ++ } ++ if ((u32) source & 3) { ++ memcpy (aligned_source, source, count); ++ data = (u32 *) aligned_source; ++ } ++ ++ /* ++ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment ++ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word ++ */ ++ val = 2 << 16 | 1 << 2; ++ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); ++ ++ /* ++ * SLV_MEM_CP[23:5] = start of 1st block ++ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 ++ */ ++ val = destination & 0x00ffffe0; ++ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); ++ ++ /* ++ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] ++ */ ++ val = (destination & 0x00ffffe0) + (1<<2); ++ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); ++ ++ /* ++ * Write the data to the slave data register, rounding up to the end ++ * of the word containing the last byte (hence the > 0) ++ */ ++ while (count > 0) { ++ writel (*data++, &adev->iobase[ACX_SLV_MEM_DATA]); ++ count -= 4; ++ } ++} ++ ++ ++/* ++ * Block copy from slave buffers using memory block chain mode. Copies from the ACX ++ * receive buffer structures with minimal intervention on our part. ++ * Interrupts should be disabled when calling this. ++ */ ++void ++chaincopy_from_slavemem (acx_device_t *adev, u8 *destination, u32 source, int count) ++{ ++ u32 val; ++ u32 *data = (u32 *) destination; ++ static u8 aligned_destination[WLAN_A4FR_MAXLEN_WEP_FCS]; ++ int saved_count = count; ++ ++ /* ++ * Warn if the pointers don't look right. Destination must fit in [23:5] with ++ * zero elsewhere and source should be 32 bit aligned. ++ * Turns out the network stack sends unaligned things, so fix them before ++ * copying to the ACX. ++ */ ++ if ((source & 0x00ffffe0) != source) { ++ printk ("acx chaincopy: source block 0x%04x not aligned!\n", source); ++ dump_acxmem (adev, 0, 0x10000); ++ } ++ if ((u32) destination & 3) { ++ //printk ("acx chaincopy: data destination not word aligned!\n"); ++ data = (u32 *) aligned_destination; ++ if (count > sizeof aligned_destination) { ++ printk( KERN_ERR "chaincopy_from_slavemem overflow!\n" ); ++ count = sizeof aligned_destination; ++ } ++ } ++ ++ /* ++ * SLV_MEM_CTL[17:16] = memory block chain mode with auto-increment ++ * SLV_MEM_CTL[5:2] = offset to data portion = 1 word ++ */ ++ val = (2 << 16) | (1 << 2); ++ writel (val, &adev->iobase[ACX_SLV_MEM_CTL]); ++ ++ /* ++ * SLV_MEM_CP[23:5] = start of 1st block ++ * SLV_MEM_CP[3:2] = offset to memblkptr = 0 ++ */ ++ val = source & 0x00ffffe0; ++ writel (val, &adev->iobase[ACX_SLV_MEM_CP]); ++ ++ /* ++ * SLV_MEM_ADDR[23:2] = SLV_MEM_CTL[5:2] + SLV_MEM_CP[23:5] ++ */ ++ val = (source & 0x00ffffe0) + (1<<2); ++ writel (val, &adev->iobase[ACX_SLV_MEM_ADDR]); ++ ++ /* ++ * Read the data from the slave data register, rounding up to the end ++ * of the word containing the last byte (hence the > 0) ++ */ ++ while (count > 0) { ++ *data++ = readl (&adev->iobase[ACX_SLV_MEM_DATA]); ++ count -= 4; ++ } ++ ++ /* ++ * If the destination wasn't aligned, we would have saved it in ++ * the aligned buffer, so copy it where it should go. ++ */ ++ if ((u32) destination & 3) { ++ memcpy (destination, aligned_destination, saved_count); ++ } ++} ++ ++char ++printable (char c) ++{ ++ return ((c >= 20) && (c < 127)) ? c : '.'; ++} ++ ++#if DUMP_MEM_DEFINED > 0 ++static void ++dump_acxmem (acx_device_t *adev, u32 start, int length) ++{ ++ int i; ++ u8 buf[16]; ++ ++ while (length > 0) { ++ printk ("%04x ", start); ++ copy_from_slavemem (adev, buf, start, 16); ++ for (i = 0; (i < 16) && (i < length); i++) { ++ printk ("%02x ", buf[i]); ++ } ++ for (i = 0; (i < 16) && (i < length); i++) { ++ printk ("%c", printable (buf[i])); ++ } ++ printk ("\n"); ++ start += 16; ++ length -= 16; ++ } ++} ++#endif ++ ++static void ++enable_acx_irq(acx_device_t *adev); ++static void ++disable_acx_irq(acx_device_t *adev); ++ ++/* ++ * Return an acx pointer to the next transmit data block. ++ */ ++u32 ++allocate_acx_txbuf_space (acx_device_t *adev, int count) { ++ u32 block, next, last_block; ++ int blocks_needed; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&adev->txbuf_lock, flags); ++ /* ++ * Take 4 off the memory block size to account for the reserved word at the start of ++ * the block. ++ */ ++ blocks_needed = count / (adev->memblocksize - 4); ++ if (count % (adev->memblocksize - 4)) ++ blocks_needed++; ++ ++ if (blocks_needed <= adev->acx_txbuf_blocks_free) { ++ /* ++ * Take blocks at the head of the free list. ++ */ ++ last_block = block = adev->acx_txbuf_free; ++ ++ /* ++ * Follow block pointers through the requested number of blocks both to ++ * find the new head of the free list and to set the flags for the blocks ++ * appropriately. ++ */ ++ while (blocks_needed--) { ++ /* ++ * Keep track of the last block of the allocation ++ */ ++ last_block = adev->acx_txbuf_free; ++ ++ /* ++ * Make sure the end control flag is not set. ++ */ ++ next = read_slavemem32 (adev, adev->acx_txbuf_free) & 0x7ffff; ++ write_slavemem32 (adev, adev->acx_txbuf_free, next); ++ ++ /* ++ * Update the new head of the free list ++ */ ++ adev->acx_txbuf_free = next << 5; ++ adev->acx_txbuf_blocks_free--; ++ ++ } ++ ++ /* ++ * Flag the last block both by clearing out the next pointer ++ * and marking the control field. ++ */ ++ write_slavemem32 (adev, last_block, 0x02000000); ++ ++ /* ++ * If we're out of buffers make sure the free list pointer is NULL ++ */ ++ if (!adev->acx_txbuf_blocks_free) { ++ adev->acx_txbuf_free = 0; ++ } ++ } ++ else { ++ block = 0; ++ } ++ spin_unlock_irqrestore (&adev->txbuf_lock, flags); ++ return block; ++} ++ ++/* ++ * Return buffer space back to the pool by following the next pointers until we find ++ * the block marked as the end. Point the last block to the head of the free list, ++ * then update the head of the free list to point to the newly freed memory. ++ * This routine gets called in interrupt context, so it shouldn't block to protect ++ * the integrity of the linked list. The ISR already holds the lock. ++ */ ++void ++reclaim_acx_txbuf_space (acx_device_t *adev, u32 blockptr) { ++ u32 cur, last, next; ++ unsigned long flags; ++ ++ spin_lock_irqsave (&adev->txbuf_lock, flags); ++ if ((blockptr >= adev->acx_txbuf_start) && ++ (blockptr <= adev->acx_txbuf_start + ++ (adev->acx_txbuf_numblocks - 1) * adev->memblocksize)) { ++ cur = blockptr; ++ do { ++ last = cur; ++ next = read_slavemem32 (adev, cur); ++ ++ /* ++ * Advance to the next block in this allocation ++ */ ++ cur = (next & 0x7ffff) << 5; ++ ++ /* ++ * This block now counts as free. ++ */ ++ adev->acx_txbuf_blocks_free++; ++ } while (!(next & 0x02000000)); ++ ++ /* ++ * last now points to the last block of that allocation. Update the pointer ++ * in that block to point to the free list and reset the free list to the ++ * first block of the free call. If there were no free blocks, make sure ++ * the new end of the list marks itself as truly the end. ++ */ ++ if (adev->acx_txbuf_free) { ++ write_slavemem32 (adev, last, adev->acx_txbuf_free >> 5); ++ } ++ else { ++ write_slavemem32 (adev, last, 0x02000000); ++ } ++ adev->acx_txbuf_free = blockptr; ++ } ++ spin_unlock_irqrestore(&adev->txbuf_lock, flags); ++} ++ ++/* ++ * Initialize the pieces managing the transmit buffer pool on the ACX. The transmit ++ * buffer is a circular queue with one 32 bit word reserved at the beginning of each ++ * block. The upper 13 bits are a control field, of which only 0x02000000 has any ++ * meaning. The lower 19 bits are the address of the next block divided by 32. ++ */ ++void ++init_acx_txbuf (acx_device_t *adev) { ++ ++ /* ++ * acx100_s_init_memory_pools set up txbuf_start and txbuf_numblocks for us. ++ * All we need to do is reset the rest of the bookeeping. ++ */ ++ ++ adev->acx_txbuf_free = adev->acx_txbuf_start; ++ adev->acx_txbuf_blocks_free = adev->acx_txbuf_numblocks; ++ ++ /* ++ * Initialization leaves the last transmit pool block without a pointer back to ++ * the head of the list, but marked as the end of the list. That's how we want ++ * to see it, too, so leave it alone. This is only ever called after a firmware ++ * reset, so the ACX memory is in the state we want. ++ */ ++ ++} ++ ++INLINE_IO int ++adev_present(acx_device_t *adev) ++{ ++ /* fast version (accesses the first register, IO_ACX_SOFT_RESET, ++ * which should be safe): */ ++ return readl(adev->iobase) != 0xffffffff; ++} ++ ++/*********************************************************************** ++*/ ++static inline txdesc_t* ++get_txdesc(acx_device_t *adev, int index) ++{ ++ return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size); ++} ++ ++static inline txdesc_t* ++advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc) ++{ ++ return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size); ++} ++ ++static txhostdesc_t* ++get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ index /= adev->txdesc_size; ++ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ return &adev->txhostdesc_start[index*2]; ++} ++ ++static inline client_t* ++get_txc(acx_device_t *adev, txdesc_t* txdesc) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ index /= adev->txdesc_size; ++ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ return adev->txc[index]; ++} ++ ++static inline u16 ++get_txr(acx_device_t *adev, txdesc_t* txdesc) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ index /= adev->txdesc_size; ++ return adev->txr[index]; ++} ++ ++static inline void ++put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return; ++ } ++ index /= adev->txdesc_size; ++ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return; ++ } ++ adev->txc[index] = c; ++ adev->txr[index] = r111; ++} ++ ++ ++/*********************************************************************** ++** EEPROM and PHY read/write helpers ++*/ ++/*********************************************************************** ++** acxmem_read_eeprom_byte ++** ++** Function called to read an octet in the EEPROM. ++** ++** This function is used by acxmem_e_probe to check if the ++** connected card is a legal one or not. ++** ++** Arguments: ++** adev ptr to acx_device structure ++** addr address to read in the EEPROM ++** charbuf ptr to a char. This is where the read octet ++** will be stored ++*/ ++int ++acxmem_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf) ++{ ++ int result; ++ int count; ++ ++ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); ++ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); ++ ++ count = 0xffff; ++ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { ++ /* scheduling away instead of CPU burning loop ++ * doesn't seem to work here at all: ++ * awful delay, sometimes also failure. ++ * Doesn't matter anyway (only small delay). */ ++ if (unlikely(!--count)) { ++ printk("%s: timeout waiting for EEPROM read\n", ++ adev->ndev->name); ++ result = NOT_OK; ++ goto fail; ++ } ++ cpu_relax(); ++ } ++ ++ *charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA); ++ log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf); ++ result = OK; ++ ++fail: ++ return result; ++} ++ ++ ++/*********************************************************************** ++** We don't lock hw accesses here since we never r/w eeprom in IRQ ++** Note: this function sleeps only because of GFP_KERNEL alloc ++*/ ++#ifdef UNUSED ++int ++acxmem_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf) ++{ ++ u8 *data_verify = NULL; ++ unsigned long flags; ++ int count, i; ++ int result = NOT_OK; ++ u16 gpio_orig; ++ ++ printk("acx: WARNING! I would write to EEPROM now. " ++ "Since I really DON'T want to unless you know " ++ "what you're doing (THIS CODE WILL PROBABLY " ++ "NOT WORK YET!), I will abort that now. And " ++ "definitely make sure to make a " ++ "/proc/driver/acx_wlan0_eeprom backup copy first!!! " ++ "(the EEPROM content includes the PCI config header!! " ++ "If you kill important stuff, then you WILL " ++ "get in trouble and people DID get in trouble already)\n"); ++ return OK; ++ ++ FN_ENTER; ++ ++ data_verify = kmalloc(len, GFP_KERNEL); ++ if (!data_verify) { ++ goto end; ++ } ++ ++ /* first we need to enable the OE (EEPROM Output Enable) GPIO line ++ * to be able to write to the EEPROM. ++ * NOTE: an EEPROM writing success has been reported, ++ * but you probably have to modify GPIO_OUT, too, ++ * and you probably need to activate a different GPIO ++ * line instead! */ ++ gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE); ++ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1); ++ write_flush(adev); ++ ++ /* ok, now start writing the data out */ ++ for (i = 0; i < len; i++) { ++ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); ++ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); ++ write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i)); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_EEPROM_CTL, 1); ++ ++ count = 0xffff; ++ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { ++ if (unlikely(!--count)) { ++ printk("WARNING, DANGER!!! " ++ "Timeout waiting for EEPROM write\n"); ++ goto end; ++ } ++ cpu_relax(); ++ } ++ } ++ ++ /* disable EEPROM writing */ ++ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig); ++ write_flush(adev); ++ ++ /* now start a verification run */ ++ for (i = 0; i < len; i++) { ++ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); ++ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); ++ ++ count = 0xffff; ++ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { ++ if (unlikely(!--count)) { ++ printk("timeout waiting for EEPROM read\n"); ++ goto end; ++ } ++ cpu_relax(); ++ } ++ ++ data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA); ++ } ++ ++ if (0 == memcmp(charbuf, data_verify, len)) ++ result = OK; /* read data matches, success */ ++ ++end: ++ kfree(data_verify); ++ FN_EXIT1(result); ++ return result; ++} ++#endif /* UNUSED */ ++ ++ ++/*********************************************************************** ++** acxmem_s_read_phy_reg ++** ++** Messing with rx/tx disabling and enabling here ++** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic ++*/ ++int ++acxmem_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) ++{ ++ int result = NOT_OK; ++ int count; ++ ++ FN_ENTER; ++ ++ write_reg32(adev, IO_ACX_PHY_ADDR, reg); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_PHY_CTL, 2); ++ ++ count = 0xffff; ++ while (read_reg32(adev, IO_ACX_PHY_CTL)) { ++ /* scheduling away instead of CPU burning loop ++ * doesn't seem to work here at all: ++ * awful delay, sometimes also failure. ++ * Doesn't matter anyway (only small delay). */ ++ if (unlikely(!--count)) { ++ printk("%s: timeout waiting for phy read\n", ++ adev->ndev->name); ++ *charbuf = 0; ++ goto fail; ++ } ++ cpu_relax(); ++ } ++ ++ log(L_DEBUG, "count was %u\n", count); ++ *charbuf = read_reg8(adev, IO_ACX_PHY_DATA); ++ ++ log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg); ++ result = OK; ++ goto fail; /* silence compiler warning */ ++fail: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acxmem_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) ++{ ++ int count; ++ FN_ENTER; ++ ++ /* mprusko said that 32bit accesses result in distorted sensitivity ++ * on his card. Unconfirmed, looks like it's not true (most likely since we ++ * now properly flush writes). */ ++ write_reg32(adev, IO_ACX_PHY_DATA, value); ++ write_reg32(adev, IO_ACX_PHY_ADDR, reg); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_PHY_CTL, 1); ++ write_flush(adev); ++ ++ count = 0xffff; ++ while (read_reg32(adev, IO_ACX_PHY_CTL)) { ++ /* scheduling away instead of CPU burning loop ++ * doesn't seem to work here at all: ++ * awful delay, sometimes also failure. ++ * Doesn't matter anyway (only small delay). */ ++ if (unlikely(!--count)) { ++ printk("%s: timeout waiting for phy read\n", ++ adev->ndev->name); ++ goto fail; ++ } ++ cpu_relax(); ++ } ++ ++ log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg); ++ fail: ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++#define NO_AUTO_INCREMENT 1 ++ ++/*********************************************************************** ++** acxmem_s_write_fw ++** ++** Write the firmware image into the card. ++** ++** Arguments: ++** adev wlan device structure ++** fw_image firmware image. ++** ++** Returns: ++** 1 firmware image corrupted ++** 0 success ++*/ ++static int ++acxmem_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset) ++{ ++ int len, size, checkMismatch = -1; ++ u32 sum, v32, tmp, id; ++ /* we skip the first four bytes which contain the control sum */ ++ const u8 *p = (u8*)fw_image + 4; ++ ++ /* start the image checksum by adding the image size value */ ++ sum = p[0]+p[1]+p[2]+p[3]; ++ p += 4; ++ ++#ifdef NOPE ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ ++#else ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ ++ write_flush(adev); ++#endif ++#endif ++ len = 0; ++ size = le32_to_cpu(fw_image->size) & (~3); ++ ++ while (likely(len < size)) { ++ v32 = be32_to_cpu(*(u32*)p); ++ sum += p[0]+p[1]+p[2]+p[3]; ++ p += 4; ++ len += 4; ++ ++#ifdef NOPE ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); ++ write_flush(adev); ++#endif ++ write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32); ++ write_flush(adev); ++#endif ++ write_slavemem32 (adev, offset + len - 4, v32); ++ ++ id = read_id_register (adev); ++ ++ /* ++ * check the data written ++ */ ++ tmp = read_slavemem32 (adev, offset + len - 4); ++ if (checkMismatch && (tmp != v32)) { ++ printk ("first data mismatch at 0x%08x good 0x%08x bad 0x%08x id 0x%08x\n", ++ offset + len - 4, v32, tmp, id); ++ checkMismatch = 0; ++ } ++ } ++ log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n", ++ size, sum, le32_to_cpu(fw_image->chksum)); ++ ++ /* compare our checksum with the stored image checksum */ ++ return (sum != le32_to_cpu(fw_image->chksum)); ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_validate_fw ++** ++** Compare the firmware image given with ++** the firmware image written into the card. ++** ++** Arguments: ++** adev wlan device structure ++** fw_image firmware image. ++** ++** Returns: ++** NOT_OK firmware image corrupted or not correctly written ++** OK success ++*/ ++static int ++acxmem_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image, ++ u32 offset) ++{ ++ u32 sum, v32, w32; ++ int len, size; ++ int result = OK; ++ /* we skip the first four bytes which contain the control sum */ ++ const u8 *p = (u8*)fw_image + 4; ++ ++ /* start the image checksum by adding the image size value */ ++ sum = p[0]+p[1]+p[2]+p[3]; ++ p += 4; ++ ++ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); ++ ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ ++#else ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ ++#endif ++ ++ len = 0; ++ size = le32_to_cpu(fw_image->size) & (~3); ++ ++ while (likely(len < size)) { ++ v32 = be32_to_cpu(*(u32*)p); ++ p += 4; ++ len += 4; ++ ++#ifdef NOPE ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); ++#endif ++ udelay(10); ++ w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA); ++#endif ++ w32 = read_slavemem32 (adev, offset + len - 4); ++ ++ if (unlikely(w32 != v32)) { ++ printk("acx: FATAL: firmware upload: " ++ "data parts at offset %d don't match\n(0x%08X vs. 0x%08X)!\n" ++ "I/O timing issues or defective memory, with DWL-xx0+? " ++ "ACX_IO_WIDTH=16 may help. Please report\n", ++ len, v32, w32); ++ result = NOT_OK; ++ break; ++ } ++ ++ sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24); ++ } ++ ++ /* sum control verification */ ++ if (result != NOT_OK) { ++ if (sum != le32_to_cpu(fw_image->chksum)) { ++ printk("acx: FATAL: firmware upload: " ++ "checksums don't match!\n"); ++ result = NOT_OK; ++ } ++ } ++ ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_upload_fw ++** ++** Called from acx_reset_dev ++*/ ++static int ++acxmem_s_upload_fw(acx_device_t *adev) ++{ ++ firmware_image_t *fw_image = NULL; ++ int res = NOT_OK; ++ int try; ++ u32 file_size; ++ char *filename = "WLANGEN.BIN"; ++#ifdef PATCH_AROUND_BAD_SPOTS ++ u32 offset; ++ int i; ++ /* ++ * arm-linux-objdump -d patch.bin, or ++ * od -Ax -t x4 patch.bin after finding the bounds ++ * of the .text section with arm-linux-objdump -s patch.bin ++ */ ++ u32 patch[] = { ++ 0xe584c030, 0xe59fc008, ++ 0xe92d1000, 0xe59fc004, 0xe8bd8000, 0x0000080c, ++ 0x0000aa68, 0x605a2200, 0x2c0a689c, 0x2414d80a, ++ 0x2f00689f, 0x1c27d007, 0x06241e7c, 0x2f000e24, ++ 0xe000d1f6, 0x602e6018, 0x23036468, 0x480203db, ++ 0x60ca6003, 0xbdf0750a, 0xffff0808 ++ }; ++#endif ++ ++ FN_ENTER; ++ /* No combined image; tell common we need the radio firmware, too */ ++ adev->need_radio_fw = 1; ++ ++ fw_image = acx_s_read_fw(adev->dev, filename, &file_size); ++ if (!fw_image) { ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++ } ++ ++ for (try = 1; try <= 5; try++) { ++ res = acxmem_s_write_fw(adev, fw_image, 0); ++ log(L_DEBUG|L_INIT, "acx_write_fw (main): %d\n", res); ++ if (OK == res) { ++ res = acxmem_s_validate_fw(adev, fw_image, 0); ++ log(L_DEBUG|L_INIT, "acx_validate_fw " ++ "(main): %d\n", res); ++ } ++ ++ if (OK == res) { ++ SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED); ++ break; ++ } ++ printk("acx: firmware upload attempt #%d FAILED, " ++ "retrying...\n", try); ++ acx_s_msleep(1000); /* better wait for a while... */ ++ } ++ ++#ifdef PATCH_AROUND_BAD_SPOTS ++ /* ++ * Only want to do this if the firmware is exactly what we expect for an ++ * iPaq 4700; otherwise, bad things would ensue. ++ */ ++ if ((HX4700_FIRMWARE_CHECKSUM == fw_image->chksum) || ++ (HX4700_ALTERNATE_FIRMWARE_CHECKSUM == fw_image->chksum)) { ++ /* ++ * Put the patch after the main firmware image. 0x950c contains ++ * the ACX's idea of the end of the firmware. Use that location to ++ * load ours (which depends on that location being 0xab58) then ++ * update that location to point to after ours. ++ */ ++ ++ offset = read_slavemem32 (adev, 0x950c); ++ ++ log (L_DEBUG, "acx: patching in at 0x%04x\n", offset); ++ ++ for (i = 0; i < sizeof(patch) / sizeof(patch[0]); i++) { ++ write_slavemem32 (adev, offset, patch[i]); ++ offset += sizeof(u32); ++ } ++ ++ /* ++ * Patch the instruction at 0x0804 to branch to our ARM patch at 0xab58 ++ */ ++ write_slavemem32 (adev, 0x0804, 0xea000000 + (0xab58-0x0804-8)/4); ++ ++ /* ++ * Patch the instructions at 0x1f40 to branch to our Thumb patch at 0xab74 ++ * ++ * 4a00 ldr r2, [pc, #0] ++ * 4710 bx r2 ++ * .data 0xab74+1 ++ */ ++ write_slavemem32 (adev, 0x1f40, 0x47104a00); ++ write_slavemem32 (adev, 0x1f44, 0x0000ab74+1); ++ ++ /* ++ * Bump the end of the firmware up to beyond our patch. ++ */ ++ write_slavemem32 (adev, 0x950c, offset); ++ ++ } ++#endif ++ ++ vfree(fw_image); ++ ++ FN_EXIT1(res); ++ return res; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_upload_radio ++** ++** Uploads the appropriate radio module firmware into the card. ++*/ ++int ++acxmem_s_upload_radio(acx_device_t *adev) ++{ ++ acx_ie_memmap_t mm; ++ firmware_image_t *radio_image; ++ acx_cmd_radioinit_t radioinit; ++ int res = NOT_OK; ++ int try; ++ u32 offset; ++ u32 size; ++ char filename[sizeof("RADIONN.BIN")]; ++ ++ if (!adev->need_radio_fw) return OK; ++ ++ FN_ENTER; ++ ++ acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); ++ offset = le32_to_cpu(mm.CodeEnd); ++ ++ snprintf(filename, sizeof(filename), "RADIO%02x.BIN", ++ adev->radio_type); ++ radio_image = acx_s_read_fw(adev->dev, filename, &size); ++ if (!radio_image) { ++ printk("acx: can't load radio module '%s'\n", filename); ++ goto fail; ++ } ++ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); ++ ++ for (try = 1; try <= 5; try++) { ++ res = acxmem_s_write_fw(adev, radio_image, offset); ++ log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res); ++ if (OK == res) { ++ res = acxmem_s_validate_fw(adev, radio_image, offset); ++ log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res); ++ } ++ ++ if (OK == res) ++ break; ++ printk("acx: radio firmware upload attempt #%d FAILED, " ++ "retrying...\n", try); ++ acx_s_msleep(1000); /* better wait for a while... */ ++ } ++ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); ++ radioinit.offset = cpu_to_le32(offset); ++ ++ /* no endian conversion needed, remains in card CPU area: */ ++ radioinit.len = radio_image->size; ++ ++ vfree(radio_image); ++ ++ if (OK != res) ++ goto fail; ++ ++ /* will take a moment so let's have a big timeout */ ++ acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT, ++ &radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000)); ++ ++ res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); ++ ++fail: ++ FN_EXIT1(res); ++ return res; ++} ++ ++/*********************************************************************** ++** acxmem_l_reset_mac ++** ++** MAC will be reset ++** Call context: reset_dev ++*/ ++static void ++acxmem_l_reset_mac(acx_device_t *adev) ++{ ++ int count; ++ FN_ENTER; ++ ++ /* halt eCPU */ ++ set_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); ++ ++ /* now do soft reset of eCPU, set bit */ ++ set_regbits (adev, IO_ACX_SOFT_RESET, 0x1); ++ log(L_DEBUG, "%s: enable soft reset...\n", __func__); ++ ++ /* Windows driver sleeps here for a while with this sequence */ ++ for (count = 0; count < 200; count++) { ++ udelay (50); ++ } ++ ++ /* now clear bit again: deassert eCPU reset */ ++ log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__); ++ clear_regbits (adev, IO_ACX_SOFT_RESET, 0x1); ++ ++ /* now start a burst read from initial EEPROM */ ++ set_regbits (adev, IO_ACX_EE_START, 0x1); ++ ++ /* ++ * Windows driver sleeps here for a while with this sequence ++ */ ++ for (count = 0; count < 200; count++) { ++ udelay (50); ++ } ++ ++ /* Windows driver writes 0x10000 to register 0x808 here */ ++ ++ write_reg32 (adev, 0x808, 0x10000); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_verify_init ++*/ ++static int ++acxmem_s_verify_init(acx_device_t *adev) ++{ ++ int result = NOT_OK; ++ unsigned long timeout; ++ ++ FN_ENTER; ++ ++ timeout = jiffies + 2*HZ; ++ for (;;) { ++ u32 irqstat = read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES); ++ if ((irqstat != 0xFFFFFFFF) && (irqstat & HOST_INT_FCS_THRESHOLD)) { ++ result = OK; ++ write_reg32(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD); ++ break; ++ } ++ if (time_after(jiffies, timeout)) ++ break; ++ /* Init may take up to ~0.5 sec total */ ++ acx_s_msleep(50); ++ } ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** A few low-level helpers ++** ++** Note: these functions are not protected by lock ++** and thus are never allowed to be called from IRQ. ++** Also they must not race with fw upload which uses same hw regs ++*/ ++ ++/*********************************************************************** ++** acxmem_write_cmd_type_status ++*/ ++ ++static inline void ++acxmem_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status) ++{ ++ write_slavemem32 (adev, (u32) adev->cmd_area, type | (status << 16)); ++ write_flush(adev); ++} ++ ++ ++/*********************************************************************** ++** acxmem_read_cmd_type_status ++*/ ++static u32 ++acxmem_read_cmd_type_status(acx_device_t *adev) ++{ ++ u32 cmd_type, cmd_status; ++ ++ cmd_type = read_slavemem32 (adev, (u32) adev->cmd_area); ++ ++ cmd_status = (cmd_type >> 16); ++ cmd_type = (u16)cmd_type; ++ ++ log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n", ++ cmd_type, cmd_status, ++ acx_cmd_status_str(cmd_status)); ++ ++ return cmd_status; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_reset_dev ++** ++** Arguments: ++** netdevice that contains the adev variable ++** Returns: ++** NOT_OK on fail ++** OK on success ++** Side effects: ++** device is hard reset ++** Call context: ++** acxmem_e_probe ++** Comment: ++** This resets the device using low level hardware calls ++** as well as uploads and verifies the firmware to the card ++*/ ++ ++static inline void ++init_mboxes(acx_device_t *adev) ++{ ++ u32 cmd_offs, info_offs; ++ ++ cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS); ++ info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS); ++ adev->cmd_area = (u8*) cmd_offs; ++ adev->info_area = (u8*) info_offs; ++ /* ++ log(L_DEBUG, "iobase2=%p\n" ++ */ ++ log( L_DEBUG, "cmd_mbox_offset=%X cmd_area=%p\n" ++ "info_mbox_offset=%X info_area=%p\n", ++ cmd_offs, adev->cmd_area, ++ info_offs, adev->info_area); ++} ++ ++ ++static inline void ++read_eeprom_area(acx_device_t *adev) ++{ ++#if ACX_DEBUG > 1 ++ int offs; ++ u8 tmp; ++ ++ for (offs = 0x8c; offs < 0xb9; offs++) ++ acxmem_read_eeprom_byte(adev, offs, &tmp); ++#endif ++} ++ ++static int ++acxmem_s_reset_dev(acx_device_t *adev) ++{ ++ const char* msg = ""; ++ unsigned long flags; ++ int result = NOT_OK; ++ u16 hardware_info; ++ u16 ecpu_ctrl; ++ int count; ++ u32 tmp; ++ ++ FN_ENTER; ++ /* ++ write_reg32 (adev, IO_ACX_SLV_MEM_CP, 0); ++ */ ++ /* reset the device to make sure the eCPU is stopped ++ * to upload the firmware correctly */ ++ ++ acx_lock(adev, flags); ++ ++ /* Windows driver does some funny things here */ ++ /* ++ * clear bit 0x200 in register 0x2A0 ++ */ ++ clear_regbits (adev, 0x2A0, 0x200); ++ ++ /* ++ * Set bit 0x200 in ACX_GPIO_OUT ++ */ ++ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); ++ ++ /* ++ * read register 0x900 until its value is 0x8400104C, sleeping ++ * in between reads if it's not immediate ++ */ ++ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); ++ count = 500; ++ while (count-- && (tmp != ACX_VENDOR_ID)) { ++ mdelay (10); ++ tmp = read_reg32 (adev, REG_ACX_VENDOR_ID); ++ } ++ ++ /* end what Windows driver does */ ++ ++ acxmem_l_reset_mac(adev); ++ ++ ecpu_ctrl = read_reg32(adev, IO_ACX_ECPU_CTRL) & 1; ++ if (!ecpu_ctrl) { ++ msg = "eCPU is already running. "; ++ goto end_unlock; ++ } ++ ++#ifdef WE_DONT_NEED_THAT_DO_WE ++ if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) { ++ /* eCPU most likely means "embedded CPU" */ ++ msg = "eCPU did not start after boot from flash. "; ++ goto end_unlock; ++ } ++ ++ /* check sense on reset flags */ ++ if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) { ++ printk("%s: eCPU did not start after boot (SOR), " ++ "is this fatal?\n", adev->ndev->name); ++ } ++#endif ++ /* scan, if any, is stopped now, setting corresponding IRQ bit */ ++ adev->irq_status |= HOST_INT_SCAN_COMPLETE; ++ ++ acx_unlock(adev, flags); ++ ++ /* need to know radio type before fw load */ ++ /* Need to wait for arrival of this information in a loop, ++ * most probably since eCPU runs some init code from EEPROM ++ * (started burst read in reset_mac()) which also ++ * sets the radio type ID */ ++ ++ count = 0xffff; ++ do { ++ hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION); ++ if (!--count) { ++ msg = "eCPU didn't indicate radio type"; ++ goto end_fail; ++ } ++ cpu_relax(); ++ } while (!(hardware_info & 0xff00)); /* radio type still zero? */ ++ printk("ACX radio type 0x%02x\n", (hardware_info >> 8) & 0xff); ++ /* printk("DEBUG: count %d\n", count); */ ++ adev->form_factor = hardware_info & 0xff; ++ adev->radio_type = hardware_info >> 8; ++ ++ /* load the firmware */ ++ if (OK != acxmem_s_upload_fw(adev)) ++ goto end_fail; ++ ++ /* acx_s_msleep(10); this one really shouldn't be required */ ++ ++ /* now start eCPU by clearing bit */ ++ clear_regbits (adev, IO_ACX_ECPU_CTRL, 0x1); ++ log(L_DEBUG, "booted eCPU up and waiting for completion...\n"); ++ ++ /* Windows driver clears bit 0x200 in register 0x2A0 here */ ++ clear_regbits (adev, 0x2A0, 0x200); ++ ++ /* Windows driver sets bit 0x200 in ACX_GPIO_OUT here */ ++ set_regbits (adev, IO_ACX_GPIO_OUT, 0x200); ++ /* wait for eCPU bootup */ ++ if (OK != acxmem_s_verify_init(adev)) { ++ msg = "timeout waiting for eCPU. "; ++ goto end_fail; ++ } ++ log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n"); ++ init_mboxes(adev); ++ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); ++ ++ /* test that EEPROM is readable */ ++ read_eeprom_area(adev); ++ ++ result = OK; ++ goto end; ++ ++/* Finish error message. Indicate which function failed */ ++end_unlock: ++ acx_unlock(adev, flags); ++end_fail: ++ printk("acx: %sreset_dev() FAILED\n", msg); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_issue_cmd_timeo ++** ++** Sends command to fw, extract result ++** ++** NB: we do _not_ take lock inside, so be sure to not touch anything ++** which may interfere with IRQ handler operation ++** ++** TODO: busy wait is a bit silly, so: ++** 1) stop doing many iters - go to sleep after first ++** 2) go to waitqueue based approach: wait, not poll! ++*/ ++#undef FUNC ++#define FUNC "issue_cmd" ++ ++#if !ACX_DEBUG ++int ++acxmem_s_issue_cmd_timeo( ++ acx_device_t *adev, ++ unsigned int cmd, ++ void *buffer, ++ unsigned buflen, ++ unsigned cmd_timeout) ++{ ++#else ++int ++acxmem_s_issue_cmd_timeo_debug( ++ acx_device_t *adev, ++ unsigned cmd, ++ void *buffer, ++ unsigned buflen, ++ unsigned cmd_timeout, ++ const char* cmdstr) ++{ ++ unsigned long start = jiffies; ++#endif ++ const char *devname; ++ unsigned counter; ++ u16 irqtype; ++ int i, j; ++ u8 *p; ++ u16 cmd_status; ++ unsigned long timeout; ++ ++ FN_ENTER; ++ ++ devname = adev->ndev->name; ++ if (!devname || !devname[0] || devname[4]=='%') ++ devname = "acx"; ++ ++ log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n", ++ cmdstr, buflen, cmd_timeout, ++ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); ++ ++ if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) { ++ printk("%s: "FUNC"(): firmware is not loaded yet, " ++ "cannot execute commands!\n", devname); ++ goto bad; ++ } ++ ++ if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) { ++ printk("input buffer (len=%u):\n", buflen); ++ acx_dump_bytes(buffer, buflen); ++ } ++ ++ /* wait for firmware to become idle for our command submission */ ++ timeout = HZ/5; ++ counter = (timeout * 1000 / HZ) - 1; /* in ms */ ++ timeout += jiffies; ++ do { ++ cmd_status = acxmem_read_cmd_type_status(adev); ++ /* Test for IDLE state */ ++ if (!cmd_status) ++ break; ++ if (counter % 8 == 0) { ++ if (time_after(jiffies, timeout)) { ++ counter = 0; ++ break; ++ } ++ /* we waited 8 iterations, no luck. Sleep 8 ms */ ++ acx_s_msleep(8); ++ } ++ } while (likely(--counter)); ++ ++ if (!counter) { ++ /* the card doesn't get idle, we're in trouble */ ++ printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n", ++ devname, cmd_status); ++#if DUMP_IF_SLOW > 0 ++ dump_acxmem (adev, 0, 0x10000); ++ panic ("not idle"); ++#endif ++ goto bad; ++ } else if (counter < 190) { /* if waited >10ms... */ ++ log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. " ++ "Please report\n", 199 - counter); ++ } ++ ++ /* now write the parameters of the command if needed */ ++ if (buffer && buflen) { ++ /* if it's an INTERROGATE command, just pass the length ++ * of parameters to read, as data */ ++#if CMD_DISCOVERY ++ if (cmd == ACX1xx_CMD_INTERROGATE) ++ memset_io(adev->cmd_area + 4, 0xAA, buflen); ++#endif ++ /* ++ * slave memory version ++ */ ++ copy_to_slavemem (adev, (u32) (adev->cmd_area + 4), buffer, ++ (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen); ++ } ++ /* now write the actual command type */ ++ acxmem_write_cmd_type_status(adev, cmd, 0); ++ ++ /* clear CMD_COMPLETE bit. can be set only by IRQ handler: */ ++ adev->irq_status &= ~HOST_INT_CMD_COMPLETE; ++ ++ /* execute command */ ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD); ++ write_flush(adev); ++ ++ /* wait for firmware to process command */ ++ ++ /* Ensure nonzero and not too large timeout. ++ ** Also converts e.g. 100->99, 200->199 ++ ** which is nice but not essential */ ++ cmd_timeout = (cmd_timeout-1) | 1; ++ if (unlikely(cmd_timeout > 1199)) ++ cmd_timeout = 1199; ++ ++ /* we schedule away sometimes (timeout can be large) */ ++ counter = cmd_timeout; ++ timeout = jiffies + cmd_timeout * HZ / 1000; ++ do { ++ if (!adev->irqs_active) { /* IRQ disabled: poll */ ++ irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); ++ if (irqtype & HOST_INT_CMD_COMPLETE) { ++ write_reg16(adev, IO_ACX_IRQ_ACK, ++ HOST_INT_CMD_COMPLETE); ++ break; ++ } ++ } else { /* Wait when IRQ will set the bit */ ++ irqtype = adev->irq_status; ++ if (irqtype & HOST_INT_CMD_COMPLETE) ++ break; ++ } ++ ++ if (counter % 8 == 0) { ++ if (time_after(jiffies, timeout)) { ++ counter = 0; ++ break; ++ } ++ /* we waited 8 iterations, no luck. Sleep 8 ms */ ++ acx_s_msleep(8); ++ } ++ } while (likely(--counter)); ++ ++ /* save state for debugging */ ++ cmd_status = acxmem_read_cmd_type_status(adev); ++ ++ /* put the card in IDLE state */ ++ acxmem_write_cmd_type_status(adev, ACX1xx_CMD_RESET, 0); ++ ++ if (!counter) { /* timed out! */ ++ printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. " ++ "irq bits:0x%04X irq_status:0x%04X timeout:%dms " ++ "cmd_status:%d (%s)\n", ++ devname, (adev->irqs_active) ? "waiting" : "polling", ++ irqtype, adev->irq_status, cmd_timeout, ++ cmd_status, acx_cmd_status_str(cmd_status)); ++ printk("%s: "FUNC"(): device irq status 0x%04x\n", ++ devname, read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES)); ++ printk("%s: "FUNC"(): IO_ACX_IRQ_MASK 0x%04x IO_ACX_FEMR 0x%04x\n", ++ devname, ++ read_reg16 (adev, IO_ACX_IRQ_MASK), ++ read_reg16 (adev, IO_ACX_FEMR)); ++ if (read_reg16 (adev, IO_ACX_IRQ_MASK) == 0xffff) { ++ printk ("acxmem: firmware probably hosed - reloading\n"); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) ++ { ++ pm_message_t state; ++ acxmem_e_suspend (resume_pdev, state); ++ } ++#else ++ acxmem_e_suspend (adev->dev, 0); ++#endif ++ { ++ struct work_struct *notused; ++ fw_resumer (notused); ++ } ++ } ++ ++ goto bad; ++ } else if (cmd_timeout - counter > 30) { /* if waited >30ms... */ ++ log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. " ++ "count:%d. Please report\n", ++ (adev->irqs_active) ? "waited" : "polled", ++ cmd_timeout - counter, counter); ++ } ++ ++ if (1 != cmd_status) { /* it is not a 'Success' */ ++ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). " ++ "Took %dms of %d\n", ++ devname, cmd_status, acx_cmd_status_str(cmd_status), ++ cmd_timeout - counter, cmd_timeout); ++ /* zero out result buffer ++ * WARNING: this will trash stack in case of illegally large input ++ * length! */ ++ if (buflen > 388) { ++ /* ++ * 388 is maximum command length ++ */ ++ printk ("invalid length 0x%08x\n", buflen); ++ buflen = 388; ++ } ++ p = (u8 *) buffer; ++ for (i = 0; i < buflen; i+= 16) { ++ printk ("%04x:", i); ++ for (j = 0; (j < 16) && (i+j < buflen); j++) { ++ printk (" %02x", *p++); ++ } ++ printk ("\n"); ++ } ++ ++ if (buffer && buflen) ++ memset(buffer, 0, buflen); ++ goto bad; ++ } ++ ++ /* read in result parameters if needed */ ++ if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) { ++ copy_from_slavemem (adev, buffer, (u32) (adev->cmd_area + 4), buflen); ++ if (acx_debug & L_DEBUG) { ++ printk("output buffer (len=%u): ", buflen); ++ acx_dump_bytes(buffer, buflen); ++ } ++ } ++ ++/* ok: */ ++ log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n", ++ cmdstr, jiffies - start); ++ FN_EXIT1(OK); ++ return OK; ++ ++bad: ++ /* Give enough info so that callers can avoid ++ ** printing their own diagnostic messages */ ++#if ACX_DEBUG ++ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); ++#else ++ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); ++#endif ++ dump_stack(); ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++#if defined(NONESSENTIAL_FEATURES) ++typedef struct device_id { ++ unsigned char id[6]; ++ char *descr; ++ char *type; ++} device_id_t; ++ ++static const device_id_t ++device_ids[] = ++{ ++ { ++ {'G', 'l', 'o', 'b', 'a', 'l'}, ++ NULL, ++ NULL, ++ }, ++ { ++ {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, ++ "uninitialized", ++ "SpeedStream SS1021 or Gigafast WF721-AEX" ++ }, ++ { ++ {0x80, 0x81, 0x82, 0x83, 0x84, 0x85}, ++ "non-standard", ++ "DrayTek Vigor 520" ++ }, ++ { ++ {'?', '?', '?', '?', '?', '?'}, ++ "non-standard", ++ "Level One WPC-0200" ++ }, ++ { ++ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, ++ "empty", ++ "DWL-650+ variant" ++ } ++}; ++ ++static void ++acx_show_card_eeprom_id(acx_device_t *adev) ++{ ++ unsigned char buffer[CARD_EEPROM_ID_SIZE]; ++ int i; ++ ++ memset(&buffer, 0, CARD_EEPROM_ID_SIZE); ++ /* use direct EEPROM access */ ++ for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) { ++ if (OK != acxmem_read_eeprom_byte(adev, ++ ACX100_EEPROM_ID_OFFSET + i, ++ &buffer[i])) { ++ printk("acx: reading EEPROM FAILED\n"); ++ break; ++ } ++ } ++ ++ for (i = 0; i < VEC_SIZE(device_ids); i++) { ++ if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) { ++ if (device_ids[i].descr) { ++ printk("acx: EEPROM card ID string check " ++ "found %s card ID: is this %s?\n", ++ device_ids[i].descr, device_ids[i].type); ++ } ++ break; ++ } ++ } ++ if (i == VEC_SIZE(device_ids)) { ++ printk("acx: EEPROM card ID string check found " ++ "unknown card: expected 'Global', got '%.*s\'. " ++ "Please report\n", CARD_EEPROM_ID_SIZE, buffer); ++ } ++} ++#endif /* NONESSENTIAL_FEATURES */ ++ ++/*********************************************************************** ++** acxmem_free_desc_queues ++** ++** Releases the queues that have been allocated, the ++** others have been initialised to NULL so this ++** function can be used if only part of the queues were allocated. ++*/ ++ ++void ++acxmem_free_desc_queues(acx_device_t *adev) ++{ ++#define ACX_FREE_QUEUE(size, ptr, phyaddr) \ ++ if (ptr) { \ ++ kfree(ptr); \ ++ ptr = NULL; \ ++ size = 0; \ ++ } ++ ++ FN_ENTER; ++ ++ ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy); ++ ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy); ++ ++ adev->txdesc_start = NULL; ++ ++ ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy); ++ ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy); ++ ++ adev->rxdesc_start = NULL; ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_delete_dma_regions ++*/ ++static void ++acxmem_s_delete_dma_regions(acx_device_t *adev) ++{ ++ unsigned long flags; ++ ++ FN_ENTER; ++ /* disable radio Tx/Rx. Shouldn't we use the firmware commands ++ * here instead? Or are we that much down the road that it's no ++ * longer possible here? */ ++ /* ++ * slave memory interface really doesn't like this. ++ */ ++ /* ++ write_reg16(adev, IO_ACX_ENABLE, 0); ++ */ ++ ++ acx_s_msleep(100); ++ ++ acx_lock(adev, flags); ++ acxmem_free_desc_queues(adev); ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_e_probe ++** ++** Probe routine called when a PCI device w/ matching ID is found. ++** Here's the sequence: ++** - Allocate the PCI resources. ++** - Read the PCMCIA attribute memory to make sure we have a WLAN card ++** - Reset the MAC ++** - Initialize the dev and wlan data ++** - Initialize the MAC ++** ++** pdev - ptr to pci device structure containing info about pci configuration ++** id - ptr to the device id entry that matched this device ++*/ ++static const u16 ++IO_ACX100[] = ++{ ++ 0x0000, /* IO_ACX_SOFT_RESET */ ++ ++ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ ++ 0x0018, /* IO_ACX_SLV_MEM_DATA */ ++ 0x001c, /* IO_ACX_SLV_MEM_CTL */ ++ 0x0020, /* IO_ACX_SLV_END_CTL */ ++ ++ 0x0034, /* IO_ACX_FEMR */ ++ ++ 0x007c, /* IO_ACX_INT_TRIG */ ++ 0x0098, /* IO_ACX_IRQ_MASK */ ++ 0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */ ++ 0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */ ++ 0x00ac, /* IO_ACX_IRQ_ACK */ ++ 0x00b0, /* IO_ACX_HINT_TRIG */ ++ ++ 0x0104, /* IO_ACX_ENABLE */ ++ ++ 0x0250, /* IO_ACX_EEPROM_CTL */ ++ 0x0254, /* IO_ACX_EEPROM_ADDR */ ++ 0x0258, /* IO_ACX_EEPROM_DATA */ ++ 0x025c, /* IO_ACX_EEPROM_CFG */ ++ ++ 0x0268, /* IO_ACX_PHY_ADDR */ ++ 0x026c, /* IO_ACX_PHY_DATA */ ++ 0x0270, /* IO_ACX_PHY_CTL */ ++ ++ 0x0290, /* IO_ACX_GPIO_OE */ ++ ++ 0x0298, /* IO_ACX_GPIO_OUT */ ++ ++ 0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */ ++ 0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */ ++ 0x02ac, /* IO_ACX_EEPROM_INFORMATION */ ++ ++ 0x02d0, /* IO_ACX_EE_START */ ++ 0x02d4, /* IO_ACX_SOR_CFG */ ++ 0x02d8 /* IO_ACX_ECPU_CTRL */ ++}; ++ ++static const u16 ++IO_ACX111[] = ++{ ++ 0x0000, /* IO_ACX_SOFT_RESET */ ++ ++ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ ++ 0x0018, /* IO_ACX_SLV_MEM_DATA */ ++ 0x001c, /* IO_ACX_SLV_MEM_CTL */ ++ 0x0020, /* IO_ACX_SLV_MEM_CP */ ++ ++ 0x0034, /* IO_ACX_FEMR */ ++ ++ 0x00b4, /* IO_ACX_INT_TRIG */ ++ 0x00d4, /* IO_ACX_IRQ_MASK */ ++ /* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */ ++ 0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */ ++ 0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */ ++ 0x00e8, /* IO_ACX_IRQ_ACK */ ++ 0x00ec, /* IO_ACX_HINT_TRIG */ ++ ++ 0x01d0, /* IO_ACX_ENABLE */ ++ ++ 0x0338, /* IO_ACX_EEPROM_CTL */ ++ 0x033c, /* IO_ACX_EEPROM_ADDR */ ++ 0x0340, /* IO_ACX_EEPROM_DATA */ ++ 0x0344, /* IO_ACX_EEPROM_CFG */ ++ ++ 0x0350, /* IO_ACX_PHY_ADDR */ ++ 0x0354, /* IO_ACX_PHY_DATA */ ++ 0x0358, /* IO_ACX_PHY_CTL */ ++ ++ 0x0374, /* IO_ACX_GPIO_OE */ ++ ++ 0x037c, /* IO_ACX_GPIO_OUT */ ++ ++ 0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */ ++ 0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */ ++ 0x0390, /* IO_ACX_EEPROM_INFORMATION */ ++ ++ 0x0100, /* IO_ACX_EE_START */ ++ 0x0104, /* IO_ACX_SOR_CFG */ ++ 0x0108, /* IO_ACX_ECPU_CTRL */ ++}; ++ ++static void ++dummy_netdev_init(struct net_device *ndev) {} ++ ++/* ++ * Most of the acx specific pieces of hardware reset. ++ */ ++static int ++acxmem_complete_hw_reset (acx_device_t *adev) ++{ ++ acx111_ie_configoption_t co; ++ ++ /* NB: read_reg() reads may return bogus data before reset_dev(), ++ * since the firmware which directly controls large parts of the I/O ++ * registers isn't initialized yet. ++ * acx100 seems to be more affected than acx111 */ ++ if (OK != acxmem_s_reset_dev (adev)) ++ return -1; ++ ++ if (IS_ACX100(adev)) { ++ /* ACX100: configopt struct in cmd mailbox - directly after reset */ ++ copy_from_slavemem (adev, (u8*) &co, (u32) adev->cmd_area, sizeof (co)); ++ } ++ ++ if (OK != acx_s_init_mac(adev)) ++ return -3; ++ ++ if (IS_ACX111(adev)) { ++ /* ACX111: configopt struct needs to be queried after full init */ ++ acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS); ++ } ++ ++ /* ++ * Set up transmit buffer administration ++ */ ++ init_acx_txbuf (adev); ++ ++ /* ++ * Windows driver writes 0x01000000 to register 0x288, RADIO_CTL, if the form factor ++ * is 3. It also write protects the EEPROM by writing 1<<9 to GPIO_OUT ++ */ ++ if (adev->form_factor == 3) { ++ set_regbits (adev, 0x288, 0x01000000); ++ set_regbits (adev, 0x298, 1<<9); ++ } ++ ++/* TODO: merge them into one function, they are called just once and are the same for pci & usb */ ++ if (OK != acxmem_read_eeprom_byte(adev, 0x05, &adev->eeprom_version)) ++ return -2; ++ ++ acx_s_parse_configoption(adev, &co); ++ acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */ ++ acx_display_hardware_details(adev); ++ ++ return 0; ++} ++ ++static int __devinit ++acxmem_e_probe(struct platform_device *pdev) ++{ ++ struct acx_hardware_data *hwdata = pdev->dev.platform_data; ++ acx_device_t *adev = NULL; ++ struct net_device *ndev = NULL; ++ const char *chip_name; ++ int result = -EIO; ++ int err; ++ int i; ++ unsigned long addr_size=0; ++ u8 chip_type; ++ ++ FN_ENTER; ++ (void) hwdata->start_hw(); ++ ++ /* FIXME: prism54 calls pci_set_mwi() here, ++ * should we do/support the same? */ ++ ++ /* chiptype is u8 but id->driver_data is ulong ++ ** Works for now (possible values are 1 and 2) */ ++ chip_type = CHIPTYPE_ACX100; ++ /* acx100 and acx111 have different PCI memory regions */ ++ if (chip_type == CHIPTYPE_ACX100) { ++ chip_name = "ACX100"; ++ } else if (chip_type == CHIPTYPE_ACX111) { ++ chip_name = "ACX111"; ++ } else { ++ printk("acx: unknown chip type 0x%04X\n", chip_type); ++ goto fail_unknown_chiptype; ++ } ++ ++ printk("acx: found %s-based wireless network card\n", chip_name); ++ log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug); ++ ++ ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init); ++ /* (NB: memsets to 0 entire area) */ ++ if (!ndev) { ++ printk("acx: no memory for netdevice struct\n"); ++ goto fail_alloc_netdev; ++ } ++ ++ platform_set_drvdata (pdev, ndev); ++ ++ ether_setup(ndev); ++ ++ /* ++ * use platform_data resources that were provided ++ */ ++ ndev->irq = 0; ++ for (i=0; inum_resources; i++) { ++ if (pdev->resource[i].flags == IORESOURCE_IRQ) { ++ ndev->irq = pdev->resource[i].start; ++ } ++ else if (pdev->resource[i].flags == IORESOURCE_MEM) { ++ ndev->base_addr = pdev->resource[i].start; ++ addr_size = pdev->resource[i].end - pdev->resource[i].start; ++ } ++ } ++ if (addr_size == 0 || ndev->irq == 0) ++ goto fail_hw_params; ++ ndev->open = &acxmem_e_open; ++ ndev->stop = &acxmem_e_close; ++ pdev->dev.release = &acxmem_e_release; ++ ndev->hard_start_xmit = &acx_i_start_xmit; ++ ndev->get_stats = &acx_e_get_stats; ++#if IW_HANDLER_VERSION <= 5 ++ ndev->get_wireless_stats = &acx_e_get_wireless_stats; ++#endif ++ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; ++ ndev->set_multicast_list = &acxmem_i_set_multicast_list; ++ ndev->tx_timeout = &acxmem_i_tx_timeout; ++ ndev->change_mtu = &acx_e_change_mtu; ++ ndev->watchdog_timeo = 4 * HZ; ++ ++ adev = ndev2adev(ndev); ++ spin_lock_init(&adev->lock); /* initial state: unlocked */ ++ spin_lock_init(&adev->txbuf_lock); ++ /* We do not start with downed sem: we want PARANOID_LOCKING to work */ ++ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ ++ /* since nobody can see new netdev yet, we can as well ++ ** just _presume_ that we're under sem (instead of actually taking it): */ ++ /* acx_sem_lock(adev); */ ++ adev->dev = &pdev->dev; ++ adev->ndev = ndev; ++ adev->dev_type = DEVTYPE_MEM; ++ adev->chip_type = chip_type; ++ adev->chip_name = chip_name; ++ adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111; ++ adev->membase = (volatile u32 *) ndev->base_addr; ++ adev->iobase = (volatile u32 *) ioremap_nocache (ndev->base_addr, addr_size); ++ /* to find crashes due to weird driver access ++ * to unconfigured interface (ifup) */ ++ adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead; ++ ++#if defined(NONESSENTIAL_FEATURES) ++ acx_show_card_eeprom_id(adev); ++#endif /* NONESSENTIAL_FEATURES */ ++ ++#ifdef SET_MODULE_OWNER ++ SET_MODULE_OWNER(ndev); ++#endif ++ SET_NETDEV_DEV(ndev, &pdev->dev); ++ ++ log(L_IRQ|L_INIT, "using IRQ %d\n", ndev->irq); ++ ++ /* ok, pci setup is finished, now start initializing the card */ ++ ++ if (OK != acxmem_complete_hw_reset (adev)) ++ goto fail_reset; ++ ++ /* ++ * Set up default things for most of the card settings. ++ */ ++ acx_s_set_defaults(adev); ++ ++ /* Register the card, AFTER everything else has been set up, ++ * since otherwise an ioctl could step on our feet due to ++ * firmware operations happening in parallel or uninitialized data */ ++ err = register_netdev(ndev); ++ if (OK != err) { ++ printk("acx: register_netdev() FAILED: %d\n", err); ++ goto fail_register_netdev; ++ } ++ ++ acx_proc_register_entries(ndev); ++ ++ /* Now we have our device, so make sure the kernel doesn't try ++ * to send packets even though we're not associated to a network yet */ ++ acx_stop_queue(ndev, "on probe"); ++ acx_carrier_off(ndev, "on probe"); ++ ++ /* ++ * Set up a default monitor type so that poor combinations of initialization ++ * sequences in monitor mode don't end up destroying the hardware type. ++ */ ++ adev->monitor_type = ARPHRD_ETHER; ++ ++ /* ++ * Register to receive inetaddr notifier changes. This will allow us to ++ * catch if the user changes the MAC address of the interface. ++ */ ++ register_netdevice_notifier(&acx_netdev_notifier); ++ ++ /* after register_netdev() userspace may start working with dev ++ * (in particular, on other CPUs), we only need to up the sem */ ++ /* acx_sem_unlock(adev); */ ++ ++ printk("acx "ACX_RELEASE": net device %s, driver compiled " ++ "against wireless extensions %d and Linux %s\n", ++ ndev->name, WIRELESS_EXT, UTS_RELEASE); ++ ++#if CMD_DISCOVERY ++ great_inquisitor(adev); ++#endif ++ ++ result = OK; ++ goto done; ++ ++ /* error paths: undo everything in reverse order... */ ++ ++fail_register_netdev: ++ ++ acxmem_s_delete_dma_regions(adev); ++ ++fail_reset: ++fail_hw_params: ++ free_netdev(ndev); ++fail_alloc_netdev: ++fail_unknown_chiptype: ++ ++ ++done: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxmem_e_remove ++** ++** Shut device down (if not hot unplugged) ++** and deallocate PCI resources for the acx chip. ++** ++** pdev - ptr to PCI device structure containing info about pci configuration ++*/ ++static int __devexit ++acxmem_e_remove(struct platform_device *pdev) ++{ ++ struct acx_hardware_data *hwdata = pdev->dev.platform_data; ++ struct net_device *ndev; ++ acx_device_t *adev; ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ ndev = (struct net_device*) platform_get_drvdata(pdev); ++ if (!ndev) { ++ log(L_DEBUG, "%s: card is unused. Skipping any release code\n", ++ __func__); ++ goto end; ++ } ++ ++ adev = ndev2adev(ndev); ++ ++ /* If device wasn't hot unplugged... */ ++ if (adev_present(adev)) { ++ ++ acx_sem_lock(adev); ++ ++ /* disable both Tx and Rx to shut radio down properly */ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); ++ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); ++ ++#ifdef REDUNDANT ++ /* put the eCPU to sleep to save power ++ * Halting is not possible currently, ++ * since not supported by all firmware versions */ ++ acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0); ++#endif ++ acx_lock(adev, flags); ++ ++ /* disable power LED to save power :-) */ ++ log(L_INIT, "switching off power LED to save power\n"); ++ acxmem_l_power_led(adev, 0); ++ ++ /* stop our eCPU */ ++ if (IS_ACX111(adev)) { ++ /* FIXME: does this actually keep halting the eCPU? ++ * I don't think so... ++ */ ++ acxmem_l_reset_mac(adev); ++ } else { ++ u16 temp; ++ ++ /* halt eCPU */ ++ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; ++ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); ++ write_flush(adev); ++ } ++ ++ acx_unlock(adev, flags); ++ ++ acx_sem_unlock(adev); ++ } ++ ++ ++ /* ++ * Unregister the notifier chain ++ */ ++ unregister_netdevice_notifier(&acx_netdev_notifier); ++ ++ /* unregister the device to not let the kernel ++ * (e.g. ioctls) access a half-deconfigured device ++ * NB: this will cause acxmem_e_close() to be called, ++ * thus we shouldn't call it under sem! */ ++ log(L_INIT, "removing device %s\n", ndev->name); ++ unregister_netdev(ndev); ++ ++ /* unregister_netdev ensures that no references to us left. ++ * For paranoid reasons we continue to follow the rules */ ++ acx_sem_lock(adev); ++ ++ if (adev->dev_state_mask & ACX_STATE_IFACE_UP) { ++ acxmem_s_down(ndev); ++ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ } ++ ++ acx_proc_unregister_entries(ndev); ++ ++ acxmem_s_delete_dma_regions(adev); ++ ++ /* finally, clean up PCI bus state */ ++ if (adev->iobase) iounmap((void *)adev->iobase); ++ ++ acx_sem_unlock(adev); ++ ++ /* Free netdev (quite late, ++ * since otherwise we might get caught off-guard ++ * by a netdev timeout handler execution ++ * expecting to see a working dev...) */ ++ free_netdev(ndev); ++ ++ (void) hwdata->stop_hw(); ++ ++ printk ("e_remove done\n"); ++end: ++ FN_EXIT0; ++ ++ return 0; ++} ++ ++ ++/*********************************************************************** ++** TODO: PM code needs to be fixed / debugged / tested. ++*/ ++#ifdef CONFIG_PM ++static int ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) ++acxmem_e_suspend(struct platform_device *pdev, pm_message_t state) ++#else ++acxmem_e_suspend(struct device *pdev, u32 state) ++#endif ++{ ++ struct net_device *ndev = platform_get_drvdata(pdev); ++ acx_device_t *adev; ++ struct acx_hardware_data *hwdata; ++ ++ FN_ENTER; ++ printk("acx: suspend handler is experimental!\n"); ++ printk("sus: dev %p\n", ndev); ++ ++ if (!netif_running(ndev)) ++ goto end; ++ ++ adev = ndev2adev(ndev); ++ printk("sus: adev %p\n", adev); ++ ++ hwdata = adev->dev->platform_data; ++ ++ acx_sem_lock(adev); ++ ++ netif_device_detach(ndev); /* this one cannot sleep */ ++ acxmem_s_down(ndev); ++ /* down() does not set it to 0xffff, but here we really want that */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); ++ write_reg16(adev, IO_ACX_FEMR, 0x0); ++ acxmem_s_delete_dma_regions(adev); ++ ++ /* ++ * Turn the ACX chip off. ++ */ ++ hwdata->stop_hw(); ++ ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT0; ++ return OK; ++} ++ ++ ++ ++static void ++fw_resumer(struct work_struct *notused) ++{ ++ struct platform_device *pdev = resume_pdev; ++ struct net_device *ndev = platform_get_drvdata(pdev); ++ acx_device_t *adev; ++ struct acx_hardware_data *hwdata; ++ ++ printk("acx: resume handler is experimental!\n"); ++ printk("rsm: got dev %p\n", ndev); ++ ++ if (!netif_running(ndev)) ++ return; ++ ++ adev = ndev2adev(ndev); ++ printk("rsm: got adev %p\n", adev); ++ ++ acx_sem_lock(adev); ++ ++ hwdata = adev->dev->platform_data; ++ ++ /* ++ * Turn on the ACX. ++ */ ++ hwdata->start_hw(); ++ ++ acxmem_complete_hw_reset (adev); ++ ++ /* ++ * done by acx_s_set_defaults for initial startup ++ */ ++ acxmem_set_interrupt_mask(adev); ++ ++ printk ("rsm: bringing up interface\n"); ++ SET_BIT (adev->set_mask, GETSET_ALL); ++ acxmem_s_up(ndev); ++ printk("rsm: acx up done\n"); ++ ++ /* now even reload all card parameters as they were before suspend, ++ * and possibly be back in the network again already :-) ++ */ ++ /* - most settings updated in acxmem_s_up() ++ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) { ++ adev->set_mask = GETSET_ALL; ++ acx_s_update_card_settings(adev); ++ printk("rsm: settings updated\n"); ++ } ++ */ ++ netif_device_attach(ndev); ++ printk("rsm: device attached\n"); ++ ++ acx_sem_unlock(adev); ++} ++ ++DECLARE_WORK( fw_resume_work, fw_resumer ); ++ ++static int ++acxmem_e_resume(struct platform_device *pdev) ++{ ++ FN_ENTER; ++ ++ resume_pdev = pdev; ++ schedule_work( &fw_resume_work ); ++ ++ FN_EXIT0; ++ return OK; ++} ++#endif /* CONFIG_PM */ ++ ++ ++/*********************************************************************** ++** acxmem_s_up ++** ++** This function is called by acxmem_e_open (when ifconfig sets the device as up) ++** ++** Side effects: ++** - Enables on-card interrupt requests ++** - calls acx_s_start ++*/ ++ ++static void ++enable_acx_irq(acx_device_t *adev) ++{ ++ FN_ENTER; ++ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask); ++ write_reg16(adev, IO_ACX_FEMR, 0x8000); ++ adev->irqs_active = 1; ++ FN_EXIT0; ++} ++ ++static void ++acxmem_s_up(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ enable_acx_irq(adev); ++ acx_unlock(adev, flags); ++ ++ /* acx fw < 1.9.3.e has a hardware timer, and older drivers ++ ** used to use it. But we don't do that anymore, our OS ++ ** has reliable software timers */ ++ init_timer(&adev->mgmt_timer); ++ adev->mgmt_timer.function = acx_i_timer; ++ adev->mgmt_timer.data = (unsigned long)adev; ++ ++ /* Need to set ACX_STATE_IFACE_UP first, or else ++ ** timer won't be started by acx_set_status() */ ++ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_2_STA: ++ /* actual scan cmd will happen in start() */ ++ acx_set_status(adev, ACX_STATUS_1_SCANNING); break; ++ case ACX_MODE_3_AP: ++ case ACX_MODE_MONITOR: ++ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break; ++ } ++ ++ acx_s_start(adev); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_down ++** ++** This disables the netdevice ++** ++** Side effects: ++** - disables on-card interrupt request ++*/ ++ ++static void ++disable_acx_irq(acx_device_t *adev) ++{ ++ FN_ENTER; ++ ++ /* I guess mask is not 0xffff because acx100 won't signal ++ ** cmd completion then (needed for ifup). ++ ** Someone with acx100 please confirm */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off); ++ write_reg16(adev, IO_ACX_FEMR, 0x0); ++ adev->irqs_active = 0; ++ FN_EXIT0; ++} ++ ++static void ++acxmem_s_down(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ /* Disable IRQs first, so that IRQs cannot race with us */ ++ /* then wait until interrupts have finished executing on other CPUs */ ++ acx_lock(adev, flags); ++ disable_acx_irq(adev); ++ synchronize_irq(adev->pdev->irq); ++ acx_unlock(adev, flags); ++ ++ /* we really don't want to have an asynchronous tasklet disturb us ++ ** after something vital for its job has been shut down, so ++ ** end all remaining work now. ++ ** ++ ** NB: carrier_off (done by set_status below) would lead to ++ ** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK(). ++ ** That's why we do FLUSH first. ++ ** ++ ** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK() ++ ** waits for acx_e_after_interrupt_task to complete if it is running ++ ** on another CPU, but acx_e_after_interrupt_task ++ ** will sleep on sem forever, because it is taken by us! ++ ** Work around that by temporary sem unlock. ++ ** This will fail miserably if we'll be hit by concurrent ++ ** iwconfig or something in between. TODO! */ ++ acx_sem_unlock(adev); ++ FLUSH_SCHEDULED_WORK(); ++ acx_sem_lock(adev); ++ ++ /* This is possible: ++ ** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task -> ++ ** -> set_status(ASSOCIATED) -> wake_queue() ++ ** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK ++ ** lock/unlock is just paranoia, maybe not needed */ ++ acx_lock(adev, flags); ++ acx_stop_queue(ndev, "on ifdown"); ++ acx_set_status(adev, ACX_STATUS_0_STOPPED); ++ acx_unlock(adev, flags); ++ ++ /* kernel/timer.c says it's illegal to del_timer_sync() ++ ** a timer which restarts itself. We guarantee this cannot ++ ** ever happen because acx_i_timer() never does this if ++ ** status is ACX_STATUS_0_STOPPED */ ++ del_timer_sync(&adev->mgmt_timer); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_e_open ++** ++** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP ++** from clear to set. In other words: ifconfig up. ++** ++** Returns: ++** 0 success ++** >0 f/w reported error ++** <0 driver reported error ++*/ ++static int ++acxmem_e_open(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result = OK; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ acx_init_task_scheduler(adev); ++ ++/* TODO: pci_set_power_state(pdev, PCI_D0); ? */ ++ ++ /* request shared IRQ handler */ ++ if (request_irq(ndev->irq, acxmem_i_interrupt, SA_INTERRUPT, ndev->name, ndev)) { ++ printk("%s: request_irq FAILED\n", ndev->name); ++ result = -EAGAIN; ++ goto done; ++ } ++ set_irq_type (ndev->irq, IRQT_FALLING); ++ log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq); ++ ++ /* ifup device */ ++ acxmem_s_up(ndev); ++ ++ /* We don't currently have to do anything else. ++ * The setup of the MAC should be subsequently completed via ++ * the mlme commands. ++ * Higher layers know we're ready from dev->start==1 and ++ * dev->tbusy==0. Our rx path knows to pass up received/ ++ * frames because of dev->flags&IFF_UP is true. ++ */ ++done: ++ acx_sem_unlock(adev); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxmem_e_close ++** ++** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP ++** from set to clear. I.e. called by "ifconfig DEV down" ++** ++** Returns: ++** 0 success ++** >0 f/w reported error ++** <0 driver reported error ++*/ ++static int ++acxmem_e_close(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ /* ifdown device */ ++ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ if (netif_device_present(ndev)) { ++ acxmem_s_down(ndev); ++ } ++ ++ /* disable all IRQs, release shared IRQ handler */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); ++ write_reg16(adev, IO_ACX_FEMR, 0x0); ++ free_irq(ndev->irq, ndev); ++ ++/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */ ++ ++ /* We currently don't have to do anything else. ++ * Higher layers know we're not ready from dev->start==0 and ++ * dev->tbusy==1. Our rx path knows to not pass up received ++ * frames because of dev->flags&IFF_UP is false. ++ */ ++ acx_sem_unlock(adev); ++ ++ log(L_INIT, "closed device\n"); ++ FN_EXIT0; ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acxmem_i_tx_timeout ++** ++** Called from network core. Must not sleep! ++*/ ++static void ++acxmem_i_tx_timeout(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ unsigned int tx_num_cleaned; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ ++ /* clean processed tx descs, they may have been completely full */ ++ tx_num_cleaned = acxmem_l_clean_txdesc(adev); ++ ++ /* nothing cleaned, yet (almost) no free buffers available? ++ * --> clean all tx descs, no matter which status!! ++ * Note that I strongly suspect that doing emergency cleaning ++ * may confuse the firmware. This is a last ditch effort to get ++ * ANYTHING to work again... ++ * ++ * TODO: it's best to simply reset & reinit hw from scratch... ++ */ ++ if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) { ++ printk("%s: FAILED to free any of the many full tx buffers. " ++ "Switching to emergency freeing. " ++ "Please report!\n", ndev->name); ++ acxmem_l_clean_txdesc_emergency(adev); ++ } ++ ++ if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status)) ++ acx_wake_queue(ndev, "after tx timeout"); ++ ++ /* stall may have happened due to radio drift, so recalib radio */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); ++ ++ /* do unimportant work last */ ++ printk("%s: tx timeout!\n", ndev->name); ++ adev->stats.tx_errors++; ++ ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_i_set_multicast_list ++** FIXME: most likely needs refinement ++*/ ++static void ++acxmem_i_set_multicast_list(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ ++ /* firmwares don't have allmulti capability, ++ * so just use promiscuous mode instead in this case. */ ++ if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) { ++ SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); ++ CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); ++ SET_BIT(adev->set_mask, SET_RXCONFIG); ++ /* let kernel know in case *we* needed to set promiscuous */ ++ ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI); ++ } else { ++ CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); ++ SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); ++ SET_BIT(adev->set_mask, SET_RXCONFIG); ++ ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI); ++ } ++ ++ /* cannot update card settings directly here, atomic context */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); ++ ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++ ++ ++/*************************************************************** ++** acxmem_l_process_rxdesc ++** ++** Called directly and only from the IRQ handler ++*/ ++ ++#if !ACX_DEBUG ++static inline void log_rxbuffer(const acx_device_t *adev) {} ++#else ++static void ++log_rxbuffer(const acx_device_t *adev) ++{ ++ register const struct rxhostdesc *rxhostdesc; ++ int i; ++ /* no FN_ENTER here, we don't want that */ ++ ++ rxhostdesc = adev->rxhostdesc_start; ++ if (unlikely(!rxhostdesc)) return; ++ for (i = 0; i < RX_CNT; i++) { ++ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) ++ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) ++ printk("rx: buf %d full\n", i); ++ rxhostdesc++; ++ } ++} ++#endif ++ ++static void ++acxmem_l_process_rxdesc(acx_device_t *adev) ++{ ++ register rxhostdesc_t *hostdesc; ++ register rxdesc_t *rxdesc; ++ unsigned count, tail; ++ u32 addr; ++ u8 Ctl_8; ++ ++ FN_ENTER; ++ ++ if (unlikely(acx_debug & L_BUFR)) ++ log_rxbuffer(adev); ++ ++ /* First, have a loop to determine the first descriptor that's ++ * full, just in case there's a mismatch between our current ++ * rx_tail and the full descriptor we're supposed to handle. */ ++ tail = adev->rx_tail; ++ count = RX_CNT; ++ while (1) { ++ hostdesc = &adev->rxhostdesc_start[tail]; ++ rxdesc = &adev->rxdesc_start[tail]; ++ /* advance tail regardless of outcome of the below test */ ++ tail = (tail + 1) % RX_CNT; ++ ++ /* ++ * Unlike the PCI interface, where the ACX can write directly to ++ * the host descriptors, on the slave memory interface we have to ++ * pull these. All we really need to do is check the Ctl_8 field ++ * in the rx descriptor on the ACX, which should be 0x11000000 if ++ * we should process it. ++ */ ++ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); ++ if ((Ctl_8 & DESC_CTL_HOSTOWN) && ++ (Ctl_8 & DESC_CTL_ACXDONE)) ++ break; /* found it! */ ++ ++ if (unlikely(!--count)) /* hmm, no luck: all descs empty, bail out */ ++ goto end; ++ } ++ ++ /* now process descriptors, starting with the first we figured out */ ++ while (1) { ++ log(L_BUFR, "rx: tail=%u Ctl_8=%02X\n", tail, Ctl_8); ++ /* ++ * If the ACX has CTL_RECLAIM set on this descriptor there ++ * is no buffer associated; it just wants us to tell it to ++ * reclaim the memory. ++ */ ++ if (!(Ctl_8 & DESC_CTL_RECLAIM)) { ++ ++ /* ++ * slave interface - pull data now ++ */ ++ hostdesc->length = read_slavemem16 (adev, (u32) &(rxdesc->total_length)); ++ ++ /* ++ * hostdesc->data is an rxbuffer_t, which includes header information, ++ * but the length in the data packet doesn't. The header information ++ * takes up an additional 12 bytes, so add that to the length we copy. ++ */ ++ addr = read_slavemem32 (adev, (u32) &(rxdesc->ACXMemPtr)); ++ if (addr) { ++ /* ++ * How can &(rxdesc->ACXMemPtr) above ever be zero? Looks like we ++ * get that now and then - try to trap it for debug. ++ */ ++ if (addr & 0xffff0000) { ++ printk("rxdesc 0x%08x\n", (u32) rxdesc); ++ dump_acxmem (adev, 0, 0x10000); ++ panic ("Bad access!"); ++ } ++ chaincopy_from_slavemem (adev, (u8 *) hostdesc->data, addr, ++ hostdesc->length + ++ (u32) &((rxbuffer_t *)0)->hdr_a3); ++ acx_l_process_rxbuf(adev, hostdesc->data); ++ } ++ } ++ else { ++ printk ("rx reclaim only!\n"); ++ } ++ ++ hostdesc->Status = 0; ++ ++ /* ++ * Let the ACX know we're done. ++ */ ++ CLEAR_BIT (Ctl_8, DESC_CTL_HOSTOWN); ++ SET_BIT (Ctl_8, DESC_CTL_HOSTDONE); ++ SET_BIT (Ctl_8, DESC_CTL_RECLAIM); ++ write_slavemem8 (adev, (u32) &rxdesc->Ctl_8, Ctl_8); ++ ++ /* ++ * Now tell the ACX we've finished with the receive buffer so ++ * it can finish the reclaim. ++ */ ++ write_reg16 (adev, IO_ACX_INT_TRIG, INT_TRIG_RXPRC); ++ ++ /* ok, descriptor is handled, now check the next descriptor */ ++ hostdesc = &adev->rxhostdesc_start[tail]; ++ rxdesc = &adev->rxdesc_start[tail]; ++ ++ Ctl_8 = hostdesc->Ctl_16 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); ++ ++ /* if next descriptor is empty, then bail out */ ++ if (!(Ctl_8 & DESC_CTL_HOSTOWN) || !(Ctl_8 & DESC_CTL_ACXDONE)) ++ break; ++ ++ tail = (tail + 1) % RX_CNT; ++ } ++end: ++ adev->rx_tail = tail; ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_i_interrupt ++** ++** IRQ handler (atomic context, must not sleep, blah, blah) ++*/ ++ ++/* scan is complete. all frames now on the receive queue are valid */ ++#define INFO_SCAN_COMPLETE 0x0001 ++#define INFO_WEP_KEY_NOT_FOUND 0x0002 ++/* hw has been reset as the result of a watchdog timer timeout */ ++#define INFO_WATCH_DOG_RESET 0x0003 ++/* failed to send out NULL frame from PS mode notification to AP */ ++/* recommended action: try entering 802.11 PS mode again */ ++#define INFO_PS_FAIL 0x0004 ++/* encryption/decryption process on a packet failed */ ++#define INFO_IV_ICV_FAILURE 0x0005 ++ ++/* Info mailbox format: ++2 bytes: type ++2 bytes: status ++more bytes may follow ++ rumors say about status: ++ 0x0000 info available (set by hw) ++ 0x0001 information received (must be set by host) ++ 0x1000 info available, mailbox overflowed (messages lost) (set by hw) ++ but in practice we've seen: ++ 0x9000 when we did not set status to 0x0001 on prev message ++ 0x1001 when we did set it ++ 0x0000 was never seen ++ conclusion: this is really a bitfield: ++ 0x1000 is 'info available' bit ++ 'mailbox overflowed' bit is 0x8000, not 0x1000 ++ value of 0x0000 probably means that there are no messages at all ++ P.S. I dunno how in hell hw is supposed to notice that messages are lost - ++ it does NOT clear bit 0x0001, and this bit will probably stay forever set ++ after we set it once. Let's hope this will be fixed in firmware someday ++*/ ++ ++static void ++handle_info_irq(acx_device_t *adev) ++{ ++#if ACX_DEBUG ++ static const char * const info_type_msg[] = { ++ "(unknown)", ++ "scan complete", ++ "WEP key not found", ++ "internal watchdog reset was done", ++ "failed to send powersave (NULL frame) notification to AP", ++ "encrypt/decrypt on a packet has failed", ++ "TKIP tx keys disabled", ++ "TKIP rx keys disabled", ++ "TKIP rx: key ID not found", ++ "???", ++ "???", ++ "???", ++ "???", ++ "???", ++ "???", ++ "???", ++ "TKIP IV value exceeds thresh" ++ }; ++#endif ++ u32 info_type, info_status; ++ ++ info_type = read_slavemem32 (adev, (u32) adev->info_area); ++ ++ info_status = (info_type >> 16); ++ info_type = (u16)info_type; ++ ++ /* inform fw that we have read this info message */ ++ write_slavemem32(adev, (u32) adev->info_area, info_type | 0x00010000); ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK); ++ write_flush(adev); ++ ++ log(L_CTL, "info_type:%04X info_status:%04X\n", ++ info_type, info_status); ++ ++ log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n", ++ info_status, info_type, ++ info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ? ++ 0 : info_type] ++ ); ++} ++ ++ ++static void ++log_unusual_irq(u16 irqtype) { ++ /* ++ if (!printk_ratelimit()) ++ return; ++ */ ++ ++ printk("acx: got"); ++ if (irqtype & HOST_INT_TX_XFER) { ++ printk(" Tx_Xfer"); ++ } ++ if (irqtype & HOST_INT_RX_COMPLETE) { ++ printk(" Rx_Complete"); ++ } ++ if (irqtype & HOST_INT_DTIM) { ++ printk(" DTIM"); ++ } ++ if (irqtype & HOST_INT_BEACON) { ++ printk(" Beacon"); ++ } ++ if (irqtype & HOST_INT_TIMER) { ++ log(L_IRQ, " Timer"); ++ } ++ if (irqtype & HOST_INT_KEY_NOT_FOUND) { ++ printk(" Key_Not_Found"); ++ } ++ if (irqtype & HOST_INT_IV_ICV_FAILURE) { ++ printk(" IV_ICV_Failure (crypto)"); ++ } ++ /* HOST_INT_CMD_COMPLETE */ ++ /* HOST_INT_INFO */ ++ if (irqtype & HOST_INT_OVERFLOW) { ++ printk(" Overflow"); ++ } ++ if (irqtype & HOST_INT_PROCESS_ERROR) { ++ printk(" Process_Error"); ++ } ++ /* HOST_INT_SCAN_COMPLETE */ ++ if (irqtype & HOST_INT_FCS_THRESHOLD) { ++ printk(" FCS_Threshold"); ++ } ++ if (irqtype & HOST_INT_UNKNOWN) { ++ printk(" Unknown"); ++ } ++ printk(" IRQ(s)\n"); ++} ++ ++ ++static void ++update_link_quality_led(acx_device_t *adev) ++{ ++ int qual; ++ ++ qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise); ++ if (qual > adev->brange_max_quality) ++ qual = adev->brange_max_quality; ++ ++ if (time_after(jiffies, adev->brange_time_last_state_change + ++ (HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) { ++ acxmem_l_power_led(adev, (adev->brange_last_state == 0)); ++ adev->brange_last_state ^= 1; /* toggle */ ++ adev->brange_time_last_state_change = jiffies; ++ } ++} ++ ++ ++#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* a la orinoco.c */ ++ ++static irqreturn_t ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) ++acxmem_i_interrupt(int irq, void *dev_id) ++#else ++acxmwm_i_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++#endif ++{ ++ acx_device_t *adev; ++ unsigned long flags; ++ unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY; ++ register u16 irqtype; ++ u16 unmasked; ++ ++ adev = ndev2adev((struct net_device*)dev_id); ++ ++ /* LOCKING: can just spin_lock() since IRQs are disabled anyway. ++ * I am paranoid */ ++ acx_lock(adev, flags); ++ ++ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); ++ if (unlikely(0xffff == unmasked)) { ++ /* 0xffff value hints at missing hardware, ++ * so don't do anything. ++ * Not very clean, but other drivers do the same... */ ++ log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n"); ++ goto none; ++ } ++ ++ /* We will check only "interesting" IRQ types */ ++ irqtype = unmasked & ~adev->irq_mask; ++ if (!irqtype) { ++ /* We are on a shared IRQ line and it wasn't our IRQ */ ++ log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n", ++ unmasked, adev->irq_mask); ++ goto none; ++ } ++ ++ /* Done here because IRQ_NONEs taking three lines of log ++ ** drive me crazy */ ++ FN_ENTER; ++ ++#define IRQ_ITERATE 1 ++#if IRQ_ITERATE ++if (jiffies != adev->irq_last_jiffies) { ++ adev->irq_loops_this_jiffy = 0; ++ adev->irq_last_jiffies = jiffies; ++} ++ ++/* safety condition; we'll normally abort loop below ++ * in case no IRQ type occurred */ ++while (likely(--irqcount)) { ++#endif ++ /* ACK all IRQs ASAP */ ++ write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff); ++ ++ log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n", ++ unmasked, adev->irq_mask, irqtype); ++ ++ /* Handle most important IRQ types first */ ++ if (irqtype & HOST_INT_RX_DATA) { ++ log(L_IRQ, "got Rx_Data IRQ\n"); ++ acxmem_l_process_rxdesc(adev); ++ } ++ if (irqtype & HOST_INT_TX_COMPLETE) { ++ log(L_IRQ, "got Tx_Complete IRQ\n"); ++ /* don't clean up on each Tx complete, wait a bit ++ * unless we're going towards full, in which case ++ * we do it immediately, too (otherwise we might lockup ++ * with a full Tx buffer if we go into ++ * acxmem_l_clean_txdesc() at a time when we won't wakeup ++ * the net queue in there for some reason...) */ ++ if (adev->tx_free <= TX_START_CLEAN) { ++#if TX_CLEANUP_IN_SOFTIRQ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP); ++#else ++ acxmem_l_clean_txdesc(adev); ++#endif ++ } ++ } ++ ++ /* Less frequent ones */ ++ if (irqtype & (0 ++ | HOST_INT_CMD_COMPLETE ++ | HOST_INT_INFO ++ | HOST_INT_SCAN_COMPLETE ++ )) { ++ if (irqtype & HOST_INT_CMD_COMPLETE) { ++ log(L_IRQ, "got Command_Complete IRQ\n"); ++ /* save the state for the running issue_cmd() */ ++ SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE); ++ } ++ if (irqtype & HOST_INT_INFO) { ++ handle_info_irq(adev); ++ } ++ if (irqtype & HOST_INT_SCAN_COMPLETE) { ++ log(L_IRQ, "got Scan_Complete IRQ\n"); ++ /* need to do that in process context */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN); ++ /* remember that fw is not scanning anymore */ ++ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); ++ } ++ } ++ ++ /* These we just log, but either they happen rarely ++ * or we keep them masked out */ ++ if (irqtype & (0 ++ /* | HOST_INT_RX_DATA */ ++ /* | HOST_INT_TX_COMPLETE */ ++ | HOST_INT_TX_XFER ++ | HOST_INT_RX_COMPLETE ++ | HOST_INT_DTIM ++ | HOST_INT_BEACON ++ | HOST_INT_TIMER ++ | HOST_INT_KEY_NOT_FOUND ++ | HOST_INT_IV_ICV_FAILURE ++ /* | HOST_INT_CMD_COMPLETE */ ++ /* | HOST_INT_INFO */ ++ | HOST_INT_OVERFLOW ++ | HOST_INT_PROCESS_ERROR ++ /* | HOST_INT_SCAN_COMPLETE */ ++ | HOST_INT_FCS_THRESHOLD ++ | HOST_INT_UNKNOWN ++ )) { ++ log_unusual_irq(irqtype); ++ } ++ ++#if IRQ_ITERATE ++ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); ++ irqtype = unmasked & ~adev->irq_mask; ++ /* Bail out if no new IRQ bits or if all are masked out */ ++ if (!irqtype) ++ break; ++ ++ if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) { ++ printk(KERN_ERR "acx: too many interrupts per jiffy!\n"); ++ /* Looks like card floods us with IRQs! Try to stop that */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); ++ /* This will short-circuit all future attempts to handle IRQ. ++ * We cant do much more... */ ++ adev->irq_mask = 0; ++ break; ++ } ++} ++#endif ++ /* Routine to perform blink with range */ ++ if (unlikely(adev->led_power == 2)) ++ update_link_quality_led(adev); ++ ++/* handled: */ ++ /* write_flush(adev); - not needed, last op was read anyway */ ++ acx_unlock(adev, flags); ++ FN_EXIT0; ++ return IRQ_HANDLED; ++ ++none: ++ acx_unlock(adev, flags); ++ return IRQ_NONE; ++} ++ ++ ++/*********************************************************************** ++** acxmem_l_power_led ++*/ ++void ++acxmem_l_power_led(acx_device_t *adev, int enable) ++{ ++ u16 gpio_pled = IS_ACX111(adev) ? 0x0040 : 0x0800; ++ ++ /* A hack. Not moving message rate limiting to adev->xxx ++ * (it's only a debug message after all) */ ++ static int rate_limit = 0; ++ ++ if (rate_limit++ < 3) ++ log(L_IOCTL, "Please report in case toggling the power " ++ "LED doesn't work for your card!\n"); ++ if (enable) ++ write_reg16(adev, IO_ACX_GPIO_OUT, ++ read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled); ++ else ++ write_reg16(adev, IO_ACX_GPIO_OUT, ++ read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled); ++} ++ ++ ++/*********************************************************************** ++** Ioctls ++*/ ++ ++/*********************************************************************** ++*/ ++int ++acx111pci_ioctl_info( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ struct iw_param *vwrq, ++ char *extra) ++{ ++#if ACX_DEBUG > 1 ++ acx_device_t *adev = ndev2adev(ndev); ++ rxdesc_t *rxdesc; ++ txdesc_t *txdesc; ++ rxhostdesc_t *rxhostdesc; ++ txhostdesc_t *txhostdesc; ++ struct acx111_ie_memoryconfig memconf; ++ struct acx111_ie_queueconfig queueconf; ++ unsigned long flags; ++ int i; ++ char memmap[0x34]; ++ char rxconfig[0x8]; ++ char fcserror[0x8]; ++ char ratefallback[0x5]; ++ ++ if ( !(acx_debug & (L_IOCTL|L_DEBUG)) ) ++ return OK; ++ /* using printk() since we checked debug flag already */ ++ ++ acx_sem_lock(adev); ++ ++ if (!IS_ACX111(adev)) { ++ printk("acx111-specific function called " ++ "with non-acx111 chip, aborting\n"); ++ goto end_ok; ++ } ++ ++ /* get Acx111 Memory Configuration */ ++ memset(&memconf, 0, sizeof(memconf)); ++ /* BTW, fails with 12 (Write only) error code. ++ ** Retained for easy testing of issue_cmd error handling :) */ ++ printk ("Interrogating queue config\n"); ++ acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG); ++ printk ("done with queue config\n"); ++ ++ /* get Acx111 Queue Configuration */ ++ memset(&queueconf, 0, sizeof(queueconf)); ++ printk ("Interrogating mem config options\n"); ++ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); ++ printk ("done with mem config options\n"); ++ ++ /* get Acx111 Memory Map */ ++ memset(memmap, 0, sizeof(memmap)); ++ printk ("Interrogating mem map\n"); ++ acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP); ++ printk ("done with mem map\n"); ++ ++ /* get Acx111 Rx Config */ ++ memset(rxconfig, 0, sizeof(rxconfig)); ++ printk ("Interrogating rxconfig\n"); ++ acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG); ++ printk ("done with queue rxconfig\n"); ++ ++ /* get Acx111 fcs error count */ ++ memset(fcserror, 0, sizeof(fcserror)); ++ printk ("Interrogating fcs err count\n"); ++ acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT); ++ printk ("done with err count\n"); ++ ++ /* get Acx111 rate fallback */ ++ memset(ratefallback, 0, sizeof(ratefallback)); ++ printk ("Interrogating rate fallback\n"); ++ acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK); ++ printk ("done with rate fallback\n"); ++ ++ /* force occurrence of a beacon interrupt */ ++ /* TODO: comment why is this necessary */ ++ write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON); ++ ++ /* dump Acx111 Mem Configuration */ ++ printk("dump mem config:\n" ++ "data read: %d, struct size: %d\n" ++ "Number of stations: %1X\n" ++ "Memory block size: %1X\n" ++ "tx/rx memory block allocation: %1X\n" ++ "count rx: %X / tx: %X queues\n" ++ "options %1X\n" ++ "fragmentation %1X\n" ++ "Rx Queue 1 Count Descriptors: %X\n" ++ "Rx Queue 1 Host Memory Start: %X\n" ++ "Tx Queue 1 Count Descriptors: %X\n" ++ "Tx Queue 1 Attributes: %X\n", ++ memconf.len, (int) sizeof(memconf), ++ memconf.no_of_stations, ++ memconf.memory_block_size, ++ memconf.tx_rx_memory_block_allocation, ++ memconf.count_rx_queues, memconf.count_tx_queues, ++ memconf.options, ++ memconf.fragmentation, ++ memconf.rx_queue1_count_descs, ++ acx2cpu(memconf.rx_queue1_host_rx_start), ++ memconf.tx_queue1_count_descs, ++ memconf.tx_queue1_attributes); ++ ++ /* dump Acx111 Queue Configuration */ ++ printk("dump queue head:\n" ++ "data read: %d, struct size: %d\n" ++ "tx_memory_block_address (from card): %X\n" ++ "rx_memory_block_address (from card): %X\n" ++ "rx1_queue address (from card): %X\n" ++ "tx1_queue address (from card): %X\n" ++ "tx1_queue attributes (from card): %X\n", ++ queueconf.len, (int) sizeof(queueconf), ++ queueconf.tx_memory_block_address, ++ queueconf.rx_memory_block_address, ++ queueconf.rx1_queue_address, ++ queueconf.tx1_queue_address, ++ queueconf.tx1_attributes); ++ ++ /* dump Acx111 Mem Map */ ++ printk("dump mem map:\n" ++ "data read: %d, struct size: %d\n" ++ "Code start: %X\n" ++ "Code end: %X\n" ++ "WEP default key start: %X\n" ++ "WEP default key end: %X\n" ++ "STA table start: %X\n" ++ "STA table end: %X\n" ++ "Packet template start: %X\n" ++ "Packet template end: %X\n" ++ "Queue memory start: %X\n" ++ "Queue memory end: %X\n" ++ "Packet memory pool start: %X\n" ++ "Packet memory pool end: %X\n" ++ "iobase: %p\n" ++ "iobase2: %p\n", ++ *((u16 *)&memmap[0x02]), (int) sizeof(memmap), ++ *((u32 *)&memmap[0x04]), ++ *((u32 *)&memmap[0x08]), ++ *((u32 *)&memmap[0x0C]), ++ *((u32 *)&memmap[0x10]), ++ *((u32 *)&memmap[0x14]), ++ *((u32 *)&memmap[0x18]), ++ *((u32 *)&memmap[0x1C]), ++ *((u32 *)&memmap[0x20]), ++ *((u32 *)&memmap[0x24]), ++ *((u32 *)&memmap[0x28]), ++ *((u32 *)&memmap[0x2C]), ++ *((u32 *)&memmap[0x30]), ++ adev->iobase, ++ adev->iobase2); ++ ++ /* dump Acx111 Rx Config */ ++ printk("dump rx config:\n" ++ "data read: %d, struct size: %d\n" ++ "rx config: %X\n" ++ "rx filter config: %X\n", ++ *((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig), ++ *((u16 *)&rxconfig[0x04]), ++ *((u16 *)&rxconfig[0x06])); ++ ++ /* dump Acx111 fcs error */ ++ printk("dump fcserror:\n" ++ "data read: %d, struct size: %d\n" ++ "fcserrors: %X\n", ++ *((u16 *)&fcserror[0x02]), (int) sizeof(fcserror), ++ *((u32 *)&fcserror[0x04])); ++ ++ /* dump Acx111 rate fallback */ ++ printk("dump rate fallback:\n" ++ "data read: %d, struct size: %d\n" ++ "ratefallback: %X\n", ++ *((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback), ++ *((u8 *)&ratefallback[0x04])); ++ ++ /* protect against IRQ */ ++ acx_lock(adev, flags); ++ ++ /* dump acx111 internal rx descriptor ring buffer */ ++ rxdesc = adev->rxdesc_start; ++ ++ /* loop over complete receive pool */ ++ if (rxdesc) for (i = 0; i < RX_CNT; i++) { ++ printk("\ndump internal rxdesc %d:\n" ++ "mem pos %p\n" ++ "next 0x%X\n" ++ "acx mem pointer (dynamic) 0x%X\n" ++ "CTL (dynamic) 0x%X\n" ++ "Rate (dynamic) 0x%X\n" ++ "RxStatus (dynamic) 0x%X\n" ++ "Mod/Pre (dynamic) 0x%X\n", ++ i, ++ rxdesc, ++ acx2cpu(rxdesc->pNextDesc), ++ acx2cpu(rxdesc->ACXMemPtr), ++ rxdesc->Ctl_8, ++ rxdesc->rate, ++ rxdesc->error, ++ rxdesc->SNR); ++ rxdesc++; ++ } ++ ++ /* dump host rx descriptor ring buffer */ ++ ++ rxhostdesc = adev->rxhostdesc_start; ++ ++ /* loop over complete receive pool */ ++ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { ++ printk("\ndump host rxdesc %d:\n" ++ "mem pos %p\n" ++ "buffer mem pos 0x%X\n" ++ "buffer mem offset 0x%X\n" ++ "CTL 0x%X\n" ++ "Length 0x%X\n" ++ "next 0x%X\n" ++ "Status 0x%X\n", ++ i, ++ rxhostdesc, ++ acx2cpu(rxhostdesc->data_phy), ++ rxhostdesc->data_offset, ++ le16_to_cpu(rxhostdesc->Ctl_16), ++ le16_to_cpu(rxhostdesc->length), ++ acx2cpu(rxhostdesc->desc_phy_next), ++ rxhostdesc->Status); ++ rxhostdesc++; ++ } ++ ++ /* dump acx111 internal tx descriptor ring buffer */ ++ txdesc = adev->txdesc_start; ++ ++ /* loop over complete transmit pool */ ++ if (txdesc) for (i = 0; i < TX_CNT; i++) { ++ printk("\ndump internal txdesc %d:\n" ++ "size 0x%X\n" ++ "mem pos %p\n" ++ "next 0x%X\n" ++ "acx mem pointer (dynamic) 0x%X\n" ++ "host mem pointer (dynamic) 0x%X\n" ++ "length (dynamic) 0x%X\n" ++ "CTL (dynamic) 0x%X\n" ++ "CTL2 (dynamic) 0x%X\n" ++ "Status (dynamic) 0x%X\n" ++ "Rate (dynamic) 0x%X\n", ++ i, ++ (int) sizeof(struct txdesc), ++ txdesc, ++ acx2cpu(txdesc->pNextDesc), ++ acx2cpu(txdesc->AcxMemPtr), ++ acx2cpu(txdesc->HostMemPtr), ++ le16_to_cpu(txdesc->total_length), ++ txdesc->Ctl_8, ++ txdesc->Ctl2_8, txdesc->error, ++ txdesc->u.r1.rate); ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ ++ /* dump host tx descriptor ring buffer */ ++ ++ txhostdesc = adev->txhostdesc_start; ++ ++ /* loop over complete host send pool */ ++ if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) { ++ printk("\ndump host txdesc %d:\n" ++ "mem pos %p\n" ++ "buffer mem pos 0x%X\n" ++ "buffer mem offset 0x%X\n" ++ "CTL 0x%X\n" ++ "Length 0x%X\n" ++ "next 0x%X\n" ++ "Status 0x%X\n", ++ i, ++ txhostdesc, ++ acx2cpu(txhostdesc->data_phy), ++ txhostdesc->data_offset, ++ le16_to_cpu(txhostdesc->Ctl_16), ++ le16_to_cpu(txhostdesc->length), ++ acx2cpu(txhostdesc->desc_phy_next), ++ le32_to_cpu(txhostdesc->Status)); ++ txhostdesc++; ++ } ++ ++ /* write_reg16(adev, 0xb4, 0x4); */ ++ ++ acx_unlock(adev, flags); ++end_ok: ++ ++ acx_sem_unlock(adev); ++#endif /* ACX_DEBUG */ ++ return OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acx100mem_ioctl_set_phy_amp_bias( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ struct iw_param *vwrq, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ u16 gpio_old; ++ ++ if (!IS_ACX100(adev)) { ++ /* WARNING!!! ++ * Removing this check *might* damage ++ * hardware, since we're tweaking GPIOs here after all!!! ++ * You've been warned... ++ * WARNING!!! */ ++ printk("acx: sorry, setting bias level for non-acx100 " ++ "is not supported yet\n"); ++ return OK; ++ } ++ ++ if (*extra > 7) { ++ printk("acx: invalid bias parameter, range is 0-7\n"); ++ return -EINVAL; ++ } ++ ++ acx_sem_lock(adev); ++ ++ /* Need to lock accesses to [IO_ACX_GPIO_OUT]: ++ * IRQ handler uses it to update LED */ ++ acx_lock(adev, flags); ++ gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT); ++ write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8)); ++ acx_unlock(adev, flags); ++ ++ log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old); ++ printk("%s: PHY power amplifier bias: old:%d, new:%d\n", ++ ndev->name, ++ (gpio_old & 0x0700) >> 8, (unsigned char)*extra); ++ ++ acx_sem_unlock(adev); ++ ++ return OK; ++} ++ ++/*************************************************************** ++** acxmem_l_alloc_tx ++** Actually returns a txdesc_t* ptr ++** ++** FIXME: in case of fragments, should allocate multiple descrs ++** after figuring out how many we need and whether we still have ++** sufficiently many. ++*/ ++tx_t* ++acxmem_l_alloc_tx(acx_device_t *adev) ++{ ++ struct txdesc *txdesc; ++ unsigned head; ++ u8 ctl8; ++ static int txattempts = 0; ++ ++ FN_ENTER; ++ ++ if (unlikely(!adev->tx_free)) { ++ printk("acx: BUG: no free txdesc left\n"); ++ /* ++ * Probably the ACX ignored a transmit attempt and now there's a packet ++ * sitting in the queue we think should be transmitting but the ACX doesn't ++ * know about. ++ * On the first pass, send the ACX a TxProc interrupt to try moving ++ * things along, and if that doesn't work (ie, we get called again) completely ++ * flush the transmit queue. ++ */ ++ if (txattempts < 10) { ++ txattempts++; ++ printk ("acx: trying to wake up ACX\n"); ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); ++ write_flush(adev); } ++ else { ++ txattempts = 0; ++ printk ("acx: flushing transmit queue.\n"); ++ acxmem_l_clean_txdesc_emergency (adev); ++ } ++ txdesc = NULL; ++ goto end; ++ } ++ ++ /* ++ * Make a quick check to see if there is transmit buffer space on ++ * the ACX. This can't guarantee there is enough space for the packet ++ * since we don't yet know how big it is, but it will prevent at least some ++ * annoyances. ++ */ ++ if (!adev->acx_txbuf_blocks_free) { ++ txdesc = NULL; ++ goto end; ++ } ++ ++ head = adev->tx_head; ++ /* ++ * txdesc points to ACX memory ++ */ ++ txdesc = get_txdesc(adev, head); ++ ctl8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); ++ ++ /* ++ * If we don't own the buffer (HOSTOWN) it is certainly not free; however, ++ * we may have previously thought we had enough memory to send ++ * a packet, allocated the buffer then gave up when we found not enough ++ * transmit buffer space on the ACX. In that case, HOSTOWN and ++ * ACXDONE will both be set. ++ */ ++ if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_HOSTOWN))) { ++ /* whoops, descr at current index is not free, so probably ++ * ring buffer already full */ ++ printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find " ++ "free txdesc\n", head, ctl8); ++ txdesc = NULL; ++ goto end; ++ } ++ ++ /* Needed in case txdesc won't be eventually submitted for tx */ ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_ACXDONE_HOSTOWN); ++ ++ adev->tx_free--; ++ log(L_BUFT, "tx: got desc %u, %u remain\n", ++ head, adev->tx_free); ++ /* Keep a few free descs between head and tail of tx ring. ++ ** It is not absolutely needed, just feels safer */ ++ if (adev->tx_free < TX_STOP_QUEUE) { ++ log(L_BUF, "stop queue (%u tx desc left)\n", ++ adev->tx_free); ++ acx_stop_queue(adev->ndev, NULL); ++ } ++ ++ /* returning current descriptor, so advance to next free one */ ++ adev->tx_head = (head + 1) % TX_CNT; ++end: ++ FN_EXIT0; ++ ++ return (tx_t*)txdesc; ++} ++ ++ ++/*************************************************************** ++** acxmem_l_dealloc_tx ++** Clears out a previously allocatedvoid acxmem_l_dealloc_tx(tx_t *tx_opaque); ++ transmit descriptor. The ACX ++** can get confused if we skip transmit descriptors in the queue, ++** so when we don't need a descriptor return it to its original ++** state and move the queue head pointer back. ++** ++*/ ++void ++acxmem_l_dealloc_tx(acx_device_t *adev, tx_t *tx_opaque) ++{ ++ /* ++ * txdesc is the address of the descriptor on the ACX. ++ */ ++ txdesc_t *txdesc = (txdesc_t*)tx_opaque; ++ txdesc_t tmptxdesc; ++ int index; ++ ++ memset (&tmptxdesc, 0, sizeof(tmptxdesc)); ++ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; ++ tmptxdesc.u.r1.rate = 0x0a; ++ ++ /* ++ * Clear out all of the transmit descriptor except for the next pointer ++ */ ++ copy_to_slavemem (adev, (u32) &(txdesc->HostMemPtr), ++ (u8 *) &(tmptxdesc.HostMemPtr), ++ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc)); ++ ++ /* ++ * This is only called immediately after we've allocated, so we should ++ * be able to set the head back to this descriptor. ++ */ ++ index = ((u8*) txdesc - (u8*)adev->txdesc_start) / adev->txdesc_size; ++ printk ("acx_dealloc: moving head from %d to %d\n", adev->tx_head, index); ++ adev->tx_head = index; ++} ++ ++ ++/*********************************************************************** ++*/ ++void* ++acxmem_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) ++{ ++ return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data; ++} ++ ++ ++/*********************************************************************** ++** acxmem_l_tx_data ++** ++** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). ++** Can be called from acx_i_start_xmit (data frames from net core). ++** ++** FIXME: in case of fragments, should loop over the number of ++** pre-allocated tx descrs, properly setting up transfer data and ++** CTL_xxx flags according to fragment number. ++*/ ++void ++acxmem_update_queue_indicator (acx_device_t *adev, int txqueue) ++{ ++#ifdef USING_MORE_THAN_ONE_TRANSMIT_QUEUE ++ u32 indicator; ++ unsigned long flags; ++ int count; ++ ++ /* ++ * Can't handle an interrupt while we're fiddling with the ACX's lock, ++ * according to TI. The ACX is supposed to hold fw_lock for at most ++ * 500ns. ++ */ ++ local_irq_save (flags); ++ ++ /* ++ * Wait for ACX to release the lock (at most 500ns). ++ */ ++ count = 0; ++ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) ++ && (count++ < 50)) { ++ ndelay (10); ++ } ++ if (count < 50) { ++ ++ /* ++ * Take out the host lock - anything non-zero will work, so don't worry about ++ * be/le ++ */ ++ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 1); ++ ++ /* ++ * Avoid a race condition ++ */ ++ count = 0; ++ while (read_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->fw_lock)) ++ && (count++ < 50)) { ++ ndelay (10); ++ } ++ ++ if (count < 50) { ++ /* ++ * Mark the queue active ++ */ ++ indicator = read_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator)); ++ indicator |= cpu_to_le32 (1 << txqueue); ++ write_slavemem32 (adev, (u32) &(adev->acx_queue_indicator->indicator), indicator); ++ } ++ ++ /* ++ * Release the host lock ++ */ ++ write_slavemem16 (adev, (u32) &(adev->acx_queue_indicator->host_lock), 0); ++ ++ } ++ ++ /* ++ * Restore interrupts ++ */ ++ local_irq_restore (flags); ++#endif ++} ++ ++void ++acxmem_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len) ++{ ++ /* ++ * txdesc is the address on the ACX ++ */ ++ txdesc_t *txdesc = (txdesc_t*)tx_opaque; ++ txhostdesc_t *hostdesc1, *hostdesc2; ++ client_t *clt; ++ u16 rate_cur; ++ u8 Ctl_8, Ctl2_8; ++ u32 addr; ++ ++ FN_ENTER; ++ /* fw doesn't tx such packets anyhow */ ++ if (unlikely(len < WLAN_HDR_A3_LEN)) ++ goto end; ++ ++ hostdesc1 = get_txhostdesc(adev, txdesc); ++ /* modify flag status in separate variable to be able to write it back ++ * in one big swoop later (also in order to have less device memory ++ * accesses) */ ++ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); ++ Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */ ++ ++ hostdesc2 = hostdesc1 + 1; ++ ++ /* DON'T simply set Ctl field to 0 here globally, ++ * it needs to maintain a consistent flag status (those are state flags!!), ++ * otherwise it may lead to severe disruption. Only set or reset particular ++ * flags at the exact moment this is needed... */ ++ ++ /* let chip do RTS/CTS handshaking before sending ++ * in case packet size exceeds threshold */ ++ if (len > adev->rts_threshold) ++ SET_BIT(Ctl2_8, DESC_CTL2_RTS); ++ else ++ CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS); ++ ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_3_AP: ++ clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1); ++ break; ++ case ACX_MODE_2_STA: ++ clt = adev->ap_client; ++ break; ++#if 0 ++/* testing was done on acx111: */ ++ case ACX_MODE_MONITOR: ++ SET_BIT(Ctl2_8, 0 ++/* sends CTS to self before packet */ ++ + DESC_CTL2_SEQ /* don't increase sequence field */ ++/* not working (looks like good fcs is still added) */ ++ + DESC_CTL2_FCS /* don't add the FCS */ ++/* not tested */ ++ + DESC_CTL2_MORE_FRAG ++/* not tested */ ++ + DESC_CTL2_RETRY /* don't increase retry field */ ++/* not tested */ ++ + DESC_CTL2_POWER /* don't increase power mgmt. field */ ++/* no effect */ ++ + DESC_CTL2_WEP /* encrypt this frame */ ++/* not tested */ ++ + DESC_CTL2_DUR /* don't increase duration field */ ++ ); ++ /* fallthrough */ ++#endif ++ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ ++ clt = NULL; ++ break; ++ } ++ ++ rate_cur = clt ? clt->rate_cur : adev->rate_bcast; ++ if (unlikely(!rate_cur)) { ++ printk("acx: driver bug! bad ratemask\n"); ++ goto end; ++ } ++ ++ /* used in tx cleanup routine for auto rate and accounting: */ ++ put_txcr(adev, txdesc, clt, rate_cur); ++ ++ write_slavemem16 (adev, (u32) &(txdesc->total_length), cpu_to_le16(len)); ++ hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN); ++ if (IS_ACX111(adev)) { ++ /* note that if !txdesc->do_auto, txrate->cur ++ ** has only one nonzero bit */ ++ txdesc->u.r2.rate111 = cpu_to_le16( ++ rate_cur ++ /* WARNING: I was never able to make it work with prism54 AP. ++ ** It was falling down to 1Mbit where shortpre is not applicable, ++ ** and not working at all at "5,11 basic rates only" setting. ++ ** I even didn't see tx packets in radio packet capture. ++ ** Disabled for now --vda */ ++ /*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */ ++ ); ++#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS ++ /* should add this to rate111 above as necessary */ ++ | (clt->pbcc511 ? RATE111_PBCC511 : 0) ++#endif ++ hostdesc1->length = cpu_to_le16(len); ++ } else { /* ACX100 */ ++ u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100; ++ write_slavemem8 (adev, (u32) &(txdesc->u.r1.rate), rate_100); ++#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS ++ if (clt->pbcc511) { ++ if (n == RATE100_5 || n == RATE100_11) ++ n |= RATE100_PBCC511; ++ } ++ ++ if (clt->shortpre && (clt->cur != RATE111_1)) ++ SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */ ++#endif ++ /* set autodma and reclaim and 1st mpdu */ ++ SET_BIT(Ctl_8, DESC_CTL_FIRSTFRAG); ++ ++#if ACX_FRAGMENTATION ++ /* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */ ++#endif ++ hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN); ++ ++ /* ++ * Since we're not using autodma copy the packet data to the acx now. ++ * Even host descriptors point to the packet header, and the odd indexed ++ * descriptor following points to the packet data. ++ * ++ * The first step is to find free memory in the ACX transmit buffers. ++ * They don't necessarily map one to one with the transmit queue entries, ++ * so search through them starting just after the last one used. ++ */ ++ addr = allocate_acx_txbuf_space (adev, len); ++ if (addr) { ++ chaincopy_to_slavemem (adev, addr, hostdesc1->data, len); ++ } ++ else { ++ /* ++ * Bummer. We thought we might have enough room in the transmit ++ * buffers to send this packet, but it turns out we don't. alloc_tx ++ * has already marked this transmit descriptor as HOSTOWN and ACXDONE, ++ * which means the ACX will hang when it gets to this descriptor unless ++ * we do something about it. Having a bubble in the transmit queue just ++ * doesn't seem to work, so we have to reset this transmit queue entry's ++ * state to its original value and back up our head pointer to point ++ * back to this entry. ++ */ ++ hostdesc1->length = 0; ++ hostdesc2->length = 0; ++ write_slavemem16 (adev, (u32) &(txdesc->total_length), 0); ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG); ++ adev->tx_head = ((u8*) txdesc - (u8*) adev->txdesc_start) / adev->txdesc_size; ++ goto end; ++ } ++ /* ++ * Tell the ACX where the packet is. ++ */ ++ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), addr); ++ ++ } ++ /* don't need to clean ack/rts statistics here, already ++ * done on descr cleanup */ ++ ++ /* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors ++ * are now owned by the acx100; do this as LAST operation */ ++ CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN); ++ /* flush writes before we release hostdesc to the adapter here */ ++ //wmb(); ++ ++ /* write back modified flags */ ++ /* ++ * At this point Ctl_8 should just be FIRSTFRAG ++ */ ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl2_8),Ctl2_8); ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), Ctl_8); ++ /* unused: txdesc->tx_time = cpu_to_le32(jiffies); */ ++ ++ /* ++ * Update the queue indicator to say there's data on the first queue. ++ */ ++ acxmem_update_queue_indicator (adev, 0); ++ ++ /* flush writes before we tell the adapter that it's its turn now */ ++ mmiowb(); ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); ++ write_flush(adev); ++ ++ /* log the packet content AFTER sending it, ++ * in order to not delay sending any further than absolutely needed ++ * Do separate logs for acx100/111 to have human-readable rates */ ++ if (unlikely(acx_debug & (L_XFER|L_DATA))) { ++ u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc; ++ if (IS_ACX111(adev)) ++ printk("tx: pkt (%s): len %d " ++ "rate %04X%s status %u\n", ++ acx_get_packet_type_string(le16_to_cpu(fc)), len, ++ le16_to_cpu(txdesc->u.r2.rate111), ++ (le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "", ++ adev->status); ++ else ++ printk("tx: pkt (%s): len %d rate %03u%s status %u\n", ++ acx_get_packet_type_string(fc), len, ++ read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)), ++ (Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "", ++ adev->status); ++ ++ if (acx_debug & L_DATA) { ++ printk("tx: 802.11 [%d]: ", len); ++ acx_dump_bytes(hostdesc1->data, len); ++ } ++ } ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_l_clean_txdesc ++** ++** This function resets the txdescs' status when the ACX100 ++** signals the TX done IRQ (txdescs have been processed), starting with ++** the pool index of the descriptor which we would use next, ++** in order to make sure that we can be as fast as possible ++** in filling new txdescs. ++** Everytime we get called we know where the next packet to be cleaned is. ++*/ ++ ++#if !ACX_DEBUG ++static inline void log_txbuffer(const acx_device_t *adev) {} ++#else ++static void ++log_txbuffer(acx_device_t *adev) ++{ ++ txdesc_t *txdesc; ++ int i; ++ u8 Ctl_8; ++ ++ /* no FN_ENTER here, we don't want that */ ++ /* no locks here, since it's entirely non-critical code */ ++ txdesc = adev->txdesc_start; ++ if (unlikely(!txdesc)) return; ++ printk("tx: desc->Ctl8's:"); ++ for (i = 0; i < TX_CNT; i++) { ++ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); ++ printk(" %02X", Ctl_8); ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ printk("\n"); ++} ++#endif ++ ++ ++static void ++handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger) ++{ ++ const char *err = "unknown error"; ++ ++ /* hmm, should we handle this as a mask ++ * of *several* bits? ++ * For now I think only caring about ++ * individual bits is ok... */ ++ switch (error) { ++ case 0x01: ++ err = "no Tx due to error in other fragment"; ++ adev->wstats.discard.fragment++; ++ break; ++ case 0x02: ++ err = "Tx aborted"; ++ adev->stats.tx_aborted_errors++; ++ break; ++ case 0x04: ++ err = "Tx desc wrong parameters"; ++ adev->wstats.discard.misc++; ++ break; ++ case 0x08: ++ err = "WEP key not found"; ++ adev->wstats.discard.misc++; ++ break; ++ case 0x10: ++ err = "MSDU lifetime timeout? - try changing " ++ "'iwconfig retry lifetime XXX'"; ++ adev->wstats.discard.misc++; ++ break; ++ case 0x20: ++ err = "excessive Tx retries due to either distance " ++ "too high or unable to Tx or Tx frame error - " ++ "try changing 'iwconfig txpower XXX' or " ++ "'sens'itivity or 'retry'"; ++ adev->wstats.discard.retries++; ++ /* Tx error 0x20 also seems to occur on ++ * overheating, so I'm not sure whether we ++ * actually want to do aggressive radio recalibration, ++ * since people maybe won't notice then that their hardware ++ * is slowly getting cooked... ++ * Or is it still a safe long distance from utter ++ * radio non-functionality despite many radio recalibs ++ * to final destructive overheating of the hardware? ++ * In this case we really should do recalib here... ++ * I guess the only way to find out is to do a ++ * potentially fatal self-experiment :-\ ++ * Or maybe only recalib in case we're using Tx ++ * rate auto (on errors switching to lower speed ++ * --> less heat?) or 802.11 power save mode? ++ * ++ * ok, just do it. */ ++ if (++adev->retry_errors_msg_ratelimit % 4 == 0) { ++ if (adev->retry_errors_msg_ratelimit <= 20) { ++ printk("%s: several excessive Tx " ++ "retry errors occurred, attempting " ++ "to recalibrate radio. Radio " ++ "drift might be caused by increasing " ++ "card temperature, please check the card " ++ "before it's too late!\n", ++ adev->ndev->name); ++ if (adev->retry_errors_msg_ratelimit == 20) ++ printk("disabling above message\n"); ++ } ++ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); ++ } ++ break; ++ case 0x40: ++ err = "Tx buffer overflow"; ++ adev->stats.tx_fifo_errors++; ++ break; ++ case 0x80: ++ err = "DMA error"; ++ adev->wstats.discard.misc++; ++ break; ++ } ++ adev->stats.tx_errors++; ++ if (adev->stats.tx_errors <= 20) ++ printk("%s: tx error 0x%02X, buf %02u! (%s)\n", ++ adev->ndev->name, error, finger, err); ++ else ++ printk("%s: tx error 0x%02X, buf %02u!\n", ++ adev->ndev->name, error, finger); ++} ++ ++ ++unsigned int ++acxmem_l_clean_txdesc(acx_device_t *adev) ++{ ++ txdesc_t *txdesc; ++ unsigned finger; ++ int num_cleaned; ++ u16 r111; ++ u8 error, ack_failures, rts_failures, rts_ok, r100, Ctl_8; ++ u32 acxmem; ++ txdesc_t tmptxdesc; ++ ++ FN_ENTER; ++ ++ /* ++ * Set up a template descriptor for re-initialization. The only ++ * things that get set are Ctl_8 and the rate, and the rate defaults ++ * to 1Mbps. ++ */ ++ memset (&tmptxdesc, 0, sizeof (tmptxdesc)); ++ tmptxdesc.Ctl_8 = DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG; ++ tmptxdesc.u.r1.rate = 0x0a; ++ ++ if (unlikely(acx_debug & L_DEBUG)) ++ log_txbuffer(adev); ++ ++ log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail); ++ ++ /* We know first descr which is not free yet. We advance it as far ++ ** as we see correct bits set in following descs (if next desc ++ ** is NOT free, we shouldn't advance at all). We know that in ++ ** front of tx_tail may be "holes" with isolated free descs. ++ ** We will catch up when all intermediate descs will be freed also */ ++ ++ finger = adev->tx_tail; ++ num_cleaned = 0; ++ while (likely(finger != adev->tx_head)) { ++ txdesc = get_txdesc(adev, finger); ++ ++ /* If we allocated txdesc on tx path but then decided ++ ** to NOT use it, then it will be left as a free "bubble" ++ ** in the "allocated for tx" part of the ring. ++ ** We may meet it on the next ring pass here. */ ++ ++ /* stop if not marked as "tx finished" and "host owned" */ ++ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); ++ if ((Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN) ++ != DESC_CTL_ACXDONE_HOSTOWN) { ++ if (unlikely(!num_cleaned)) { /* maybe remove completely */ ++ log(L_BUFT, "clean_txdesc: tail isn't free. " ++ "tail:%d head:%d\n", ++ adev->tx_tail, adev->tx_head); ++ } ++ break; ++ } ++ ++ /* remember desc values... */ ++ error = read_slavemem8 (adev, (u32) &(txdesc->error)); ++ ack_failures = read_slavemem8 (adev, (u32) &(txdesc->ack_failures)); ++ rts_failures = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures)); ++ rts_ok = read_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok)); ++ r100 = read_slavemem8 (adev, (u32) &(txdesc->u.r1.rate)); ++ r111 = le16_to_cpu(read_slavemem16 (adev, (u32) &(txdesc->u.r2.rate111))); ++ ++ /* need to check for certain error conditions before we ++ * clean the descriptor: we still need valid descr data here */ ++ if (unlikely(0x30 & error)) { ++ /* only send IWEVTXDROP in case of retry or lifetime exceeded; ++ * all other errors mean we screwed up locally */ ++ union iwreq_data wrqu; ++ wlan_hdr_t *hdr; ++ txhostdesc_t *hostdesc; ++ ++ hostdesc = get_txhostdesc(adev, txdesc); ++ hdr = (wlan_hdr_t *)hostdesc->data; ++ MAC_COPY(wrqu.addr.sa_data, hdr->a1); ++ wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL); ++ } ++ ++ /* ++ * Free up the transmit data buffers ++ */ ++ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); ++ if (acxmem) { ++ reclaim_acx_txbuf_space (adev, acxmem); ++ } ++ ++ /* ...and free the desc by clearing all the fields ++ except the next pointer */ ++ copy_to_slavemem (adev, ++ (u32) &(txdesc->HostMemPtr), ++ (u8 *) &(tmptxdesc.HostMemPtr), ++ sizeof (tmptxdesc) - sizeof(tmptxdesc.pNextDesc) ++ ); ++ ++ adev->tx_free++; ++ num_cleaned++; ++ ++ if ((adev->tx_free >= TX_START_QUEUE) ++ && (adev->status == ACX_STATUS_4_ASSOCIATED) ++ && (acx_queue_stopped(adev->ndev)) ++ ) { ++ log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n", ++ adev->tx_free); ++ acx_wake_queue(adev->ndev, NULL); ++ } ++ ++ /* do error checking, rate handling and logging ++ * AFTER having done the work, it's faster */ ++ ++ /* do rate handling */ ++ if (adev->rate_auto) { ++ struct client *clt = get_txc(adev, txdesc); ++ if (clt) { ++ u16 cur = get_txr(adev, txdesc); ++ if (clt->rate_cur == cur) { ++ acx_l_handle_txrate_auto(adev, clt, ++ cur, /* intended rate */ ++ r100, r111, /* actually used rate */ ++ (error & 0x30), /* was there an error? */ ++ TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free); ++ } ++ } ++ } ++ ++ if (unlikely(error)) ++ handle_tx_error(adev, error, finger); ++ ++ if (IS_ACX111(adev)) ++ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n", ++ finger, ack_failures, rts_failures, rts_ok, r111); ++ else ++ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n", ++ finger, ack_failures, rts_failures, rts_ok, r100); ++ ++ /* update pointer for descr to be cleaned next */ ++ finger = (finger + 1) % TX_CNT; ++ } ++ ++ /* remember last position */ ++ adev->tx_tail = finger; ++/* end: */ ++ FN_EXIT1(num_cleaned); ++ return num_cleaned; ++} ++ ++/* clean *all* Tx descriptors, and regardless of their previous state. ++ * Used for brute-force reset handling. */ ++void ++acxmem_l_clean_txdesc_emergency(acx_device_t *adev) ++{ ++ txdesc_t *txdesc; ++ int i; ++ u32 acxmem; ++ ++ FN_ENTER; ++ ++ for (i = 0; i < TX_CNT; i++) { ++ txdesc = get_txdesc(adev, i); ++ ++ /* free it */ ++ write_slavemem8 (adev, (u32) &(txdesc->ack_failures), 0); ++ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_failures), 0); ++ write_slavemem8 (adev, (u32) &(txdesc->u.rts.rts_ok), 0); ++ write_slavemem8 (adev, (u32) &(txdesc->error), 0); ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), DESC_CTL_HOSTOWN); ++ ++ /* ++ * Clean up the memory allocated on the ACX for this transmit descriptor. ++ */ ++ acxmem = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); ++ if (acxmem) { ++ reclaim_acx_txbuf_space (adev, acxmem); ++ } ++ ++ write_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr), 0); ++ } ++ ++ adev->tx_free = TX_CNT; ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxmem_s_create_tx_host_desc_queue ++*/ ++ ++static void* ++allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg) ++{ ++ void *ptr; ++ ptr = kmalloc (size, GFP_KERNEL); ++ /* ++ * The ACX can't use the physical address, so we'll have to fake it ++ * later and it might be handy to have the virtual address. ++ */ ++ *phy = (dma_addr_t) NULL; ++ ++ if (ptr) { ++ log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n", ++ msg, (int)size, ptr, (unsigned long long)*phy); ++ memset(ptr, 0, size); ++ return ptr; ++ } ++ printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n", ++ msg, (int)size); ++ return NULL; ++} ++ ++ ++/* ++ * In the generic slave memory access mode, most of the stuff in ++ * the txhostdesc_t is unused. It's only here because the rest of ++ * the ACX driver expects it to be since the PCI version uses indirect ++ * host memory organization with DMA. Since we're not using DMA the ++ * only use we have for the host descriptors is to store the packets ++ * on the way out. ++ */ ++static int ++acxmem_s_create_tx_host_desc_queue(acx_device_t *adev) ++{ ++ txhostdesc_t *hostdesc; ++ u8 *txbuf; ++ int i; ++ ++ FN_ENTER; ++ ++ /* allocate TX buffer */ ++ adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS; ++ ++ adev->txbuf_start = allocate(adev, adev->txbuf_area_size, ++ &adev->txbuf_startphy, "txbuf_start"); ++ if (!adev->txbuf_start) ++ goto fail; ++ ++ /* allocate the TX host descriptor queue pool */ ++ adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc); ++ ++ adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size, ++ &adev->txhostdesc_startphy, "txhostdesc_start"); ++ if (!adev->txhostdesc_start) ++ goto fail; ++ ++ /* check for proper alignment of TX host descriptor pool */ ++ if ((long) adev->txhostdesc_start & 3) { ++ printk("acx: driver bug: dma alloc returns unaligned address\n"); ++ goto fail; ++ } ++ ++ hostdesc = adev->txhostdesc_start; ++ txbuf = adev->txbuf_start; ++ ++#if 0 ++/* Each tx buffer is accessed by hardware via ++** txdesc -> txhostdesc(s) -> txbuffer(s). ++** We use only one txhostdesc per txdesc, but it looks like ++** acx111 is buggy: it accesses second txhostdesc ++** (via hostdesc.desc_phy_next field) even if ++** txdesc->length == hostdesc->length and thus ++** entire packet was placed into first txhostdesc. ++** Due to this bug acx111 hangs unless second txhostdesc ++** has le16_to_cpu(hostdesc.length) = 3 (or larger) ++** Storing NULL into hostdesc.desc_phy_next ++** doesn't seem to help. ++** ++** Update: although it worked on Xterasys XN-2522g ++** with len=3 trick, WG311v2 is even more bogus, doesn't work. ++** Keeping this code (#ifdef'ed out) for documentational purposes. ++*/ ++ for (i = 0; i < TX_CNT*2; i++) { ++ hostdesc_phy += sizeof(*hostdesc); ++ if (!(i & 1)) { ++ hostdesc->data_phy = cpu2acx(txbuf_phy); ++ /* hostdesc->data_offset = ... */ ++ /* hostdesc->reserved = ... */ ++ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); ++ /* hostdesc->length = ... */ ++ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); ++ hostdesc->pNext = ptr2acx(NULL); ++ /* hostdesc->Status = ... */ ++ /* below: non-hardware fields */ ++ hostdesc->data = txbuf; ++ ++ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS; ++ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS; ++ } else { ++ /* hostdesc->data_phy = ... */ ++ /* hostdesc->data_offset = ... */ ++ /* hostdesc->reserved = ... */ ++ /* hostdesc->Ctl_16 = ... */ ++ hostdesc->length = cpu_to_le16(3); /* bug workaround */ ++ /* hostdesc->desc_phy_next = ... */ ++ /* hostdesc->pNext = ... */ ++ /* hostdesc->Status = ... */ ++ /* below: non-hardware fields */ ++ /* hostdesc->data = ... */ ++ } ++ hostdesc++; ++ } ++#endif ++/* We initialize two hostdescs so that they point to adjacent ++** memory areas. Thus txbuf is really just a contiguous memory area */ ++ for (i = 0; i < TX_CNT*2; i++) { ++ /* ->data is a non-hardware field: */ ++ hostdesc->data = txbuf; ++ ++ if (!(i & 1)) { ++ txbuf += WLAN_HDR_A3_LEN; ++ } else { ++ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; ++ } ++ hostdesc++; ++ } ++ hostdesc--; ++ ++ FN_EXIT1(OK); ++ return OK; ++fail: ++ printk("acx: create_tx_host_desc_queue FAILED\n"); ++ /* dealloc will be done by free function on error case */ ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*************************************************************** ++** acxmem_s_create_rx_host_desc_queue ++*/ ++/* the whole size of a data buffer (header plus data body) ++ * plus 32 bytes safety offset at the end */ ++#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32) ++ ++static int ++acxmem_s_create_rx_host_desc_queue(acx_device_t *adev) ++{ ++ rxhostdesc_t *hostdesc; ++ rxbuffer_t *rxbuf; ++ int i; ++ ++ FN_ENTER; ++ ++ /* allocate the RX host descriptor queue pool */ ++ adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc); ++ ++ adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size, ++ &adev->rxhostdesc_startphy, "rxhostdesc_start"); ++ if (!adev->rxhostdesc_start) ++ goto fail; ++ ++ /* check for proper alignment of RX host descriptor pool */ ++ if ((long) adev->rxhostdesc_start & 3) { ++ printk("acx: driver bug: dma alloc returns unaligned address\n"); ++ goto fail; ++ } ++ ++ /* allocate Rx buffer pool which will be used by the acx ++ * to store the whole content of the received frames in it */ ++ adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE; ++ ++ adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size, ++ &adev->rxbuf_startphy, "rxbuf_start"); ++ if (!adev->rxbuf_start) ++ goto fail; ++ ++ rxbuf = adev->rxbuf_start; ++ hostdesc = adev->rxhostdesc_start; ++ ++ /* don't make any popular C programming pointer arithmetic mistakes ++ * here, otherwise I'll kill you... ++ * (and don't dare asking me why I'm warning you about that...) */ ++ for (i = 0; i < RX_CNT; i++) { ++ hostdesc->data = rxbuf; ++ hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE); ++ rxbuf++; ++ hostdesc++; ++ } ++ hostdesc--; ++ FN_EXIT1(OK); ++ return OK; ++fail: ++ printk("acx: create_rx_host_desc_queue FAILED\n"); ++ /* dealloc will be done by free function on error case */ ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*************************************************************** ++** acxmem_s_create_hostdesc_queues ++*/ ++int ++acxmem_s_create_hostdesc_queues(acx_device_t *adev) ++{ ++ int result; ++ result = acxmem_s_create_tx_host_desc_queue(adev); ++ if (OK != result) return result; ++ result = acxmem_s_create_rx_host_desc_queue(adev); ++ return result; ++} ++ ++ ++/*************************************************************** ++** acxmem_create_tx_desc_queue ++*/ ++static void ++acxmem_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start) ++{ ++ txdesc_t *txdesc; ++ u32 clr; ++ int i; ++ ++ FN_ENTER; ++ ++ if (IS_ACX100(adev)) ++ adev->txdesc_size = sizeof(*txdesc); ++ else ++ /* the acx111 txdesc is 4 bytes larger */ ++ adev->txdesc_size = sizeof(*txdesc) + 4; ++ ++ /* ++ * This refers to an ACX address, not one of ours ++ */ ++ adev->txdesc_start = (txdesc_t *) tx_queue_start; ++ ++ log(L_DEBUG, "adev->txdesc_start=%p\n", ++ adev->txdesc_start); ++ ++ adev->tx_free = TX_CNT; ++ /* done by memset: adev->tx_head = 0; */ ++ /* done by memset: adev->tx_tail = 0; */ ++ txdesc = adev->txdesc_start; ++ ++ if (IS_ACX111(adev)) { ++ /* ACX111 has a preinitialized Tx buffer! */ ++ /* loop over whole send pool */ ++ /* FIXME: do we have to do the hostmemptr stuff here?? */ ++ for (i = 0; i < TX_CNT; i++) { ++ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; ++ /* reserve two (hdr desc and payload desc) */ ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ } else { ++ /* ACX100 Tx buffer needs to be initialized by us */ ++ /* clear whole send pool. sizeof is safe here (we are acx100) */ ++ ++ /* ++ * adev->txdesc_start refers to device memory, so we can't write ++ * directly to it. ++ */ ++ clr = (u32) adev->txdesc_start; ++ while (clr < (u32) adev->txdesc_start + (TX_CNT * sizeof(*txdesc))) { ++ write_slavemem32 (adev, clr, 0); ++ clr += 4; ++ } ++ ++ /* loop over whole send pool */ ++ for (i = 0; i < TX_CNT; i++) { ++ log(L_DEBUG, "configure card tx descriptor: 0x%p, " ++ "size: 0x%X\n", txdesc, adev->txdesc_size); ++ ++ /* initialise ctl */ ++ /* ++ * No auto DMA here ++ */ ++ write_slavemem8 (adev, (u32) &(txdesc->Ctl_8), ++ (u8) (DESC_CTL_HOSTOWN | DESC_CTL_FIRSTFRAG)); ++ /* done by memset(0): txdesc->Ctl2_8 = 0; */ ++ ++ /* point to next txdesc */ ++ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), ++ (u32) cpu_to_le32 ((u8 *) txdesc + adev->txdesc_size)); ++ ++ /* go to the next one */ ++ /* ++ is safe here (we are acx100) */ ++ txdesc++; ++ } ++ /* go back to the last one */ ++ txdesc--; ++ /* and point to the first making it a ring buffer */ ++ write_slavemem32 (adev, (u32) &(txdesc->pNextDesc), ++ (u32) cpu_to_le32 (tx_queue_start)); ++ } ++ FN_EXIT0; ++} ++ ++ ++/*************************************************************** ++** acxmem_create_rx_desc_queue ++*/ ++static void ++acxmem_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start) ++{ ++ rxdesc_t *rxdesc; ++ u32 mem_offs; ++ int i; ++ ++ FN_ENTER; ++ ++ /* done by memset: adev->rx_tail = 0; */ ++ ++ /* ACX111 doesn't need any further config: preconfigures itself. ++ * Simply print ring buffer for debugging */ ++ if (IS_ACX111(adev)) { ++ /* rxdesc_start already set here */ ++ ++ adev->rxdesc_start = (rxdesc_t *) rx_queue_start; ++ ++ rxdesc = adev->rxdesc_start; ++ for (i = 0; i < RX_CNT; i++) { ++ log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc); ++ rxdesc = adev->rxdesc_start = (rxdesc_t *) ++ acx2cpu(rxdesc->pNextDesc); ++ } ++ } else { ++ /* we didn't pre-calculate rxdesc_start in case of ACX100 */ ++ /* rxdesc_start should be right AFTER Tx pool */ ++ adev->rxdesc_start = (rxdesc_t *) ++ ((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t))); ++ /* NB: sizeof(txdesc_t) above is valid because we know ++ ** we are in if (acx100) block. Beware of cut-n-pasting elsewhere! ++ ** acx111's txdesc is larger! */ ++ ++ mem_offs = (u32) adev->rxdesc_start; ++ while (mem_offs < (u32) adev->rxdesc_start + (RX_CNT * sizeof (*rxdesc))) { ++ write_slavemem32 (adev, mem_offs, 0); ++ mem_offs += 4; ++ } ++ ++ /* loop over whole receive pool */ ++ rxdesc = adev->rxdesc_start; ++ for (i = 0; i < RX_CNT; i++) { ++ log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc); ++ /* point to next rxdesc */ ++ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), ++ (u32) cpu_to_le32 ((u8 *) rxdesc + sizeof(*rxdesc))); ++ /* go to the next one */ ++ rxdesc++; ++ } ++ /* go to the last one */ ++ rxdesc--; ++ ++ /* and point to the first making it a ring buffer */ ++ write_slavemem32 (adev, (u32) &(rxdesc->pNextDesc), ++ (u32) cpu_to_le32 (rx_queue_start)); ++ } ++ FN_EXIT0; ++} ++ ++ ++/*************************************************************** ++** acxmem_create_desc_queues ++*/ ++void ++acxmem_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start) ++{ ++ u32 *p; ++ int i; ++ ++ acxmem_create_tx_desc_queue(adev, tx_queue_start); ++ acxmem_create_rx_desc_queue(adev, rx_queue_start); ++ p = (u32 *) adev->acx_queue_indicator; ++ for (i = 0; i < 4; i++) { ++ write_slavemem32 (adev, (u32) p, 0); ++ p++; ++ } ++} ++ ++ ++/*************************************************************** ++** acxmem_s_proc_diag_output ++*/ ++char* ++acxmem_s_proc_diag_output(char *p, acx_device_t *adev) ++{ ++ const char *rtl, *thd, *ttl; ++ txdesc_t *txdesc; ++ u8 Ctl_8; ++ rxdesc_t *rxdesc; ++ int i; ++ u32 tmp; ++ txdesc_t txd; ++ u8 buf[0x200]; ++ int j, k; ++ ++ FN_ENTER; ++ ++#if DUMP_MEM_DURING_DIAG > 0 ++ dump_acxmem (adev, 0, 0x10000); ++ panic ("dump finished"); ++#endif ++ ++ p += sprintf(p, "** Rx buf **\n"); ++ rxdesc = adev->rxdesc_start; ++ if (rxdesc) for (i = 0; i < RX_CNT; i++) { ++ rtl = (i == adev->rx_tail) ? " [tail]" : ""; ++ Ctl_8 = read_slavemem8 (adev, (u32) &(rxdesc->Ctl_8)); ++ if (Ctl_8 & DESC_CTL_HOSTOWN) ++ p += sprintf(p, "%02u (%02x) FULL%s\n", i, Ctl_8, rtl); ++ else ++ p += sprintf(p, "%02u (%02x) empty%s\n", i, Ctl_8, rtl); ++ rxdesc++; ++ } ++ p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free, ++ acx_queue_stopped(adev->ndev) ? "STOPPED" : "running"); ++ ++ p += sprintf(p, "** Tx buf %d blocks total, %d available, free list head %04x\n", ++ adev->acx_txbuf_numblocks, adev->acx_txbuf_blocks_free, adev->acx_txbuf_free); ++ txdesc = adev->txdesc_start; ++ if (txdesc) { ++ for (i = 0; i < TX_CNT; i++) { ++ thd = (i == adev->tx_head) ? " [head]" : ""; ++ ttl = (i == adev->tx_tail) ? " [tail]" : ""; ++ copy_from_slavemem (adev, (u8 *) &txd, (u32) txdesc, sizeof (txd)); ++ Ctl_8 = read_slavemem8 (adev, (u32) &(txdesc->Ctl_8)); ++ if (Ctl_8 & DESC_CTL_ACXDONE) ++ p += sprintf(p, "%02u ready to free (%02X)%s%s", i, Ctl_8, thd, ttl); ++ else if (Ctl_8 & DESC_CTL_HOSTOWN) ++ p += sprintf(p, "%02u available (%02X)%s%s", i, Ctl_8, thd, ttl); ++ else ++ p += sprintf(p, "%02u busy (%02X)%s%s", i, Ctl_8, thd, ttl); ++ tmp = read_slavemem32 (adev, (u32) &(txdesc->AcxMemPtr)); ++ if (tmp) { ++ p += sprintf (p, " %04x", tmp); ++ while ((tmp = read_slavemem32 (adev, (u32) tmp)) != 0x02000000) { ++ tmp <<= 5; ++ p += sprintf (p, " %04x", tmp); ++ } ++ } ++ p += sprintf (p, "\n"); ++ p += sprintf (p, " %04x: %04x %04x %04x %04x %04x %04x %04x %04x %04x %04x %02x %02x %02x %02x\n" ++ "%02x %02x %02x %02x %04x\n", ++ (u32) txdesc, ++ txd.pNextDesc.v, txd.HostMemPtr.v, txd.AcxMemPtr.v, txd.tx_time, ++ txd.total_length, txd.Reserved, ++ txd.dummy[0], txd.dummy[1], txd.dummy[2], txd.dummy[3], ++ txd.Ctl_8, txd.Ctl2_8, txd.error, txd.ack_failures, ++ txd.u.rts.rts_failures, txd.u.rts.rts_ok, txd.u.r1.rate, txd.u.r1.queue_ctrl, ++ txd.queue_info ++ ); ++ if (txd.AcxMemPtr.v) { ++ copy_from_slavemem (adev, buf, txd.AcxMemPtr.v, sizeof (buf)); ++ for (j = 0; (j < txd.total_length) && (j<(sizeof(buf)-4)); j+=16) { ++ p += sprintf (p, " "); ++ for (k = 0; (k < 16) && (j+k < txd.total_length); k++) { ++ p += sprintf (p, " %02x", buf[j+k+4]); ++ } ++ p += sprintf (p, "\n"); ++ } ++ } ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ } ++ ++ p += sprintf(p, ++ "\n" ++ "** Generic slave data **\n" ++ "irq_mask 0x%04x irq_status 0x%04x irq on acx 0x%04x\n" ++ "txbuf_start 0x%p, txbuf_area_size %u\n" ++ "txdesc_size %u, txdesc_start 0x%p\n" ++ "txhostdesc_start 0x%p, txhostdesc_area_size %u\n" ++ "txbuf start 0x%04x, txbuf size %d\n" ++ "rxdesc_start 0x%p\n" ++ "rxhostdesc_start 0x%p, rxhostdesc_area_size %u\n" ++ "rxbuf_start 0x%p, rxbuf_area_size %u\n", ++ adev->irq_mask, adev->irq_status, read_reg32(adev, IO_ACX_IRQ_STATUS_NON_DES), ++ adev->txbuf_start, adev->txbuf_area_size, ++ adev->txdesc_size, adev->txdesc_start, ++ adev->txhostdesc_start, adev->txhostdesc_area_size, ++ adev->acx_txbuf_start, adev->acx_txbuf_numblocks * adev->memblocksize, ++ adev->rxdesc_start, ++ adev->rxhostdesc_start, adev->rxhostdesc_area_size, ++ adev->rxbuf_start, adev->rxbuf_area_size); ++ FN_EXIT0; ++ return p; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acxmem_proc_eeprom_output(char *buf, acx_device_t *adev) ++{ ++ char *p = buf; ++ int i; ++ ++ FN_ENTER; ++ ++ for (i = 0; i < 0x400; i++) { ++ acxmem_read_eeprom_byte(adev, i, p++); ++ } ++ ++ FN_EXIT1(p - buf); ++ return p - buf; ++} ++ ++ ++/*********************************************************************** ++*/ ++void ++acxmem_set_interrupt_mask(acx_device_t *adev) ++{ ++ if (IS_ACX111(adev)) { ++ adev->irq_mask = (u16) ~(0 ++ | HOST_INT_RX_DATA ++ | HOST_INT_TX_COMPLETE ++ /* | HOST_INT_TX_XFER */ ++ /* | HOST_INT_RX_COMPLETE */ ++ /* | HOST_INT_DTIM */ ++ /* | HOST_INT_BEACON */ ++ /* | HOST_INT_TIMER */ ++ /* | HOST_INT_KEY_NOT_FOUND */ ++ | HOST_INT_IV_ICV_FAILURE ++ | HOST_INT_CMD_COMPLETE ++ | HOST_INT_INFO ++ | HOST_INT_OVERFLOW ++ /* | HOST_INT_PROCESS_ERROR */ ++ | HOST_INT_SCAN_COMPLETE ++ | HOST_INT_FCS_THRESHOLD ++ | HOST_INT_UNKNOWN ++ ); ++ /* Or else acx100 won't signal cmd completion, right? */ ++ adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */ ++ } else { ++ adev->irq_mask = (u16) ~(0 ++ | HOST_INT_RX_DATA ++ | HOST_INT_TX_COMPLETE ++ /* | HOST_INT_TX_XFER */ ++ /* | HOST_INT_RX_COMPLETE */ ++ /* | HOST_INT_DTIM */ ++ /* | HOST_INT_BEACON */ ++ /* | HOST_INT_TIMER */ ++ /* | HOST_INT_KEY_NOT_FOUND */ ++ /* | HOST_INT_IV_ICV_FAILURE */ ++ | HOST_INT_CMD_COMPLETE ++ | HOST_INT_INFO ++ /* | HOST_INT_OVERFLOW */ ++ /* | HOST_INT_PROCESS_ERROR */ ++ | HOST_INT_SCAN_COMPLETE ++ /* | HOST_INT_FCS_THRESHOLD */ ++ /* | HOST_INT_BEACON_MISSED */ ++ ); ++ adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */ ++ } ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acx100mem_s_set_tx_level(acx_device_t *adev, u8 level_dbm) ++{ ++ struct acx111_ie_tx_level tx_level; ++ ++ /* since it can be assumed that at least the Maxim radio has a ++ * maximum power output of 20dBm and since it also can be ++ * assumed that these values drive the DAC responsible for ++ * setting the linear Tx level, I'd guess that these values ++ * should be the corresponding linear values for a dBm value, ++ * in other words: calculate the values from that formula: ++ * Y [dBm] = 10 * log (X [mW]) ++ * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm) ++ * and you're done... ++ * Hopefully that's ok, but you never know if we're actually ++ * right... (especially since Windows XP doesn't seem to show ++ * actual Tx dBm values :-P) */ ++ ++ /* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the ++ * values are EXACTLY mW!!! Not sure about RFMD and others, ++ * though... */ ++ static const u8 dbm2val_maxim[21] = { ++ 63, 63, 63, 62, ++ 61, 61, 60, 60, ++ 59, 58, 57, 55, ++ 53, 50, 47, 43, ++ 38, 31, 23, 13, ++ 0 ++ }; ++ static const u8 dbm2val_rfmd[21] = { ++ 0, 0, 0, 1, ++ 2, 2, 3, 3, ++ 4, 5, 6, 8, ++ 10, 13, 16, 20, ++ 25, 32, 41, 50, ++ 63 ++ }; ++ const u8 *table; ++ ++ switch (adev->radio_type) { ++ case RADIO_MAXIM_0D: ++ table = &dbm2val_maxim[0]; ++ break; ++ case RADIO_RFMD_11: ++ case RADIO_RALINK_15: ++ table = &dbm2val_rfmd[0]; ++ break; ++ default: ++ printk("%s: unknown/unsupported radio type, " ++ "cannot modify tx power level yet!\n", ++ adev->ndev->name); ++ return NOT_OK; ++ } ++ /* ++ * The hx4700 EEPROM, at least, only supports 1 power setting. The configure ++ * routine matches the PA bias with the gain, so just use its default value. ++ * The values are: 0x2b for the gain and 0x03 for the PA bias. The firmware ++ * writes the gain level to the Tx gain control DAC and the PA bias to the Maxim ++ * radio's PA bias register. The firmware limits itself to 0 - 64 when writing to the ++ * gain control DAC. ++ * ++ * Physically between the ACX and the radio, higher Tx gain control DAC values result ++ * in less power output; 0 volts to the Maxim radio results in the highest output power ++ * level, which I'm assuming matches up with 0 in the Tx Gain DAC register. ++ * ++ * Although there is only the 1 power setting, one of the radio firmware functions adjusts ++ * the transmit power level up and down. That function is called by the ACX FIQ handler ++ * under certain conditions. ++ */ ++ tx_level.level = 1; ++ //return acx_s_configure(adev, &tx_level, ACX1xx_IE_DOT11_TX_POWER_LEVEL); ++ ++ printk("%s: changing radio power level to %u dBm (%u)\n", ++ adev->ndev->name, level_dbm, table[level_dbm]); ++ acxmem_s_write_phy_reg(adev, 0x11, table[level_dbm]); ++ ++ return 0; ++} ++ ++ ++static struct platform_driver ++acxmem_drv_id = { ++ .driver = { ++ .name = "acx-mem", ++ }, ++ .probe = acxmem_e_probe, ++ .remove = __devexit_p(acxmem_e_remove), ++#ifdef CONFIG_PM ++ .suspend = acxmem_e_suspend, ++ .resume = acxmem_e_resume ++#endif /* CONFIG_PM */ ++}; ++ ++ ++/*********************************************************************** ++** acxmem_e_init_module ++** ++** Module initialization routine, called once at module load time ++*/ ++int __init ++acxmem_e_init_module(void) ++{ ++ int res; ++ ++ FN_ENTER; ++ ++#if (ACX_IO_WIDTH==32) ++ printk("acx: compiled to use 32bit I/O access. " ++ "I/O timing issues might occur, such as " ++ "non-working firmware upload. Report them\n"); ++#else ++ printk("acx: compiled to use 16bit I/O access only " ++ "(compatibility mode)\n"); ++#endif ++ ++#ifdef __LITTLE_ENDIAN ++#define ENDIANNESS_STRING "running on a little-endian CPU\n" ++#else ++#define ENDIANNESS_STRING "running on a BIG-ENDIAN CPU\n" ++#endif ++ log(L_INIT, ++ ENDIANNESS_STRING ++ "PCI module " ACX_RELEASE " initialized, " ++ "waiting for cards to probe...\n" ++ ); ++ ++ res = platform_driver_register (&acxmem_drv_id); ++ FN_EXIT1(res); ++ return res; ++} ++ ++ ++/*********************************************************************** ++** acxmem_e_cleanup_module ++** ++** Called at module unload time. This is our last chance to ++** clean up after ourselves. ++*/ ++void __exit ++acxmem_e_cleanup_module(void) ++{ ++ FN_ENTER; ++ ++ printk ("cleanup_module\n"); ++ platform_driver_unregister( &acxmem_drv_id ); ++ ++ FN_EXIT0; ++} ++ ++void acxmem_e_release(struct device *dev) { ++} ++ ++MODULE_AUTHOR( "Todd Blumer " ); ++MODULE_DESCRIPTION( "ACX Slave Memory Driver" ); ++MODULE_LICENSE( "GPL" ); ++ +Index: linux-2.6.23/drivers/net/wireless/acx/pci.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/pci.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,4234 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++#define ACX_PCI 1 ++ ++#include ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) ++#include ++#endif ++ ++/* Linux 2.6.18+ uses */ ++#ifndef UTS_RELEASE ++#include ++#endif ++ ++#include /* required for Lx 2.6.8 ?? */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "acx.h" ++ ++ ++/*********************************************************************** ++*/ ++#define PCI_TYPE (PCI_USES_MEM | PCI_ADDR0 | PCI_NO_ACPI_WAKE) ++#define PCI_ACX100_REGION1 0x01 ++#define PCI_ACX100_REGION1_SIZE 0x1000 /* Memory size - 4K bytes */ ++#define PCI_ACX100_REGION2 0x02 ++#define PCI_ACX100_REGION2_SIZE 0x10000 /* Memory size - 64K bytes */ ++ ++#define PCI_ACX111_REGION1 0x00 ++#define PCI_ACX111_REGION1_SIZE 0x2000 /* Memory size - 8K bytes */ ++#define PCI_ACX111_REGION2 0x01 ++#define PCI_ACX111_REGION2_SIZE 0x20000 /* Memory size - 128K bytes */ ++ ++/* Texas Instruments Vendor ID */ ++#define PCI_VENDOR_ID_TI 0x104c ++ ++/* ACX100 22Mb/s WLAN controller */ ++#define PCI_DEVICE_ID_TI_TNETW1100A 0x8400 ++#define PCI_DEVICE_ID_TI_TNETW1100B 0x8401 ++ ++/* ACX111 54Mb/s WLAN controller */ ++#define PCI_DEVICE_ID_TI_TNETW1130 0x9066 ++ ++/* PCI Class & Sub-Class code, Network-'Other controller' */ ++#define PCI_CLASS_NETWORK_OTHERS 0x0280 ++ ++#define CARD_EEPROM_ID_SIZE 6 ++ ++#ifndef PCI_D0 ++/* From include/linux/pci.h */ ++#define PCI_D0 0 ++#define PCI_D1 1 ++#define PCI_D2 2 ++#define PCI_D3hot 3 ++#define PCI_D3cold 4 ++#define PCI_UNKNOWN 5 ++#define PCI_POWER_ERROR -1 ++#endif ++ ++ ++/*********************************************************************** ++*/ ++static void acxpci_i_tx_timeout(struct net_device *ndev); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) ++static irqreturn_t acxpci_i_interrupt(int irq, void *dev_id); ++#else ++static irqreturn_t acxpci_i_interrupt(int irq, void *dev_id, struct pt_regs *regs); ++#endif ++static void acxpci_i_set_multicast_list(struct net_device *ndev); ++ ++static int acxpci_e_open(struct net_device *ndev); ++static int acxpci_e_close(struct net_device *ndev); ++static void acxpci_s_up(struct net_device *ndev); ++static void acxpci_s_down(struct net_device *ndev); ++ ++ ++/*********************************************************************** ++** Register access ++*/ ++ ++/* Pick one */ ++/* #define INLINE_IO static */ ++#define INLINE_IO static inline ++ ++INLINE_IO u32 ++read_reg32(acx_device_t *adev, unsigned int offset) ++{ ++#if ACX_IO_WIDTH == 32 ++ return readl((u8 *)adev->iobase + adev->io[offset]); ++#else ++ return readw((u8 *)adev->iobase + adev->io[offset]) ++ + (readw((u8 *)adev->iobase + adev->io[offset] + 2) << 16); ++#endif ++} ++ ++INLINE_IO u16 ++read_reg16(acx_device_t *adev, unsigned int offset) ++{ ++ return readw((u8 *)adev->iobase + adev->io[offset]); ++} ++ ++INLINE_IO u8 ++read_reg8(acx_device_t *adev, unsigned int offset) ++{ ++ return readb((u8 *)adev->iobase + adev->io[offset]); ++} ++ ++INLINE_IO void ++write_reg32(acx_device_t *adev, unsigned int offset, u32 val) ++{ ++#if ACX_IO_WIDTH == 32 ++ writel(val, (u8 *)adev->iobase + adev->io[offset]); ++#else ++ writew(val & 0xffff, (u8 *)adev->iobase + adev->io[offset]); ++ writew(val >> 16, (u8 *)adev->iobase + adev->io[offset] + 2); ++#endif ++} ++ ++INLINE_IO void ++write_reg16(acx_device_t *adev, unsigned int offset, u16 val) ++{ ++ writew(val, (u8 *)adev->iobase + adev->io[offset]); ++} ++ ++INLINE_IO void ++write_reg8(acx_device_t *adev, unsigned int offset, u8 val) ++{ ++ writeb(val, (u8 *)adev->iobase + adev->io[offset]); ++} ++ ++/* Handle PCI posting properly: ++ * Make sure that writes reach the adapter in case they require to be executed ++ * *before* the next write, by reading a random (and safely accessible) register. ++ * This call has to be made if there is no read following (which would flush the data ++ * to the adapter), yet the written data has to reach the adapter immediately. */ ++INLINE_IO void ++write_flush(acx_device_t *adev) ++{ ++ /* readb(adev->iobase + adev->io[IO_ACX_INFO_MAILBOX_OFFS]); */ ++ /* faster version (accesses the first register, IO_ACX_SOFT_RESET, ++ * which should also be safe): */ ++ readb(adev->iobase); ++} ++ ++INLINE_IO int ++adev_present(acx_device_t *adev) ++{ ++ /* fast version (accesses the first register, IO_ACX_SOFT_RESET, ++ * which should be safe): */ ++ return readl(adev->iobase) != 0xffffffff; ++} ++ ++ ++/*********************************************************************** ++*/ ++static inline txdesc_t* ++get_txdesc(acx_device_t *adev, int index) ++{ ++ return (txdesc_t*) (((u8*)adev->txdesc_start) + index * adev->txdesc_size); ++} ++ ++static inline txdesc_t* ++advance_txdesc(acx_device_t *adev, txdesc_t* txdesc, int inc) ++{ ++ return (txdesc_t*) (((u8*)txdesc) + inc * adev->txdesc_size); ++} ++ ++static txhostdesc_t* ++get_txhostdesc(acx_device_t *adev, txdesc_t* txdesc) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ index /= adev->txdesc_size; ++ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ return &adev->txhostdesc_start[index*2]; ++} ++ ++static inline client_t* ++get_txc(acx_device_t *adev, txdesc_t* txdesc) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ index /= adev->txdesc_size; ++ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return NULL; ++ } ++ return adev->txc[index]; ++} ++ ++static inline u16 ++get_txr(acx_device_t *adev, txdesc_t* txdesc) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ index /= adev->txdesc_size; ++ return adev->txr[index]; ++} ++ ++static inline void ++put_txcr(acx_device_t *adev, txdesc_t* txdesc, client_t* c, u16 r111) ++{ ++ int index = (u8*)txdesc - (u8*)adev->txdesc_start; ++ if (unlikely(ACX_DEBUG && (index % adev->txdesc_size))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return; ++ } ++ index /= adev->txdesc_size; ++ if (unlikely(ACX_DEBUG && (index >= TX_CNT))) { ++ printk("bad txdesc ptr %p\n", txdesc); ++ return; ++ } ++ adev->txc[index] = c; ++ adev->txr[index] = r111; ++} ++ ++ ++/*********************************************************************** ++** EEPROM and PHY read/write helpers ++*/ ++/*********************************************************************** ++** acxpci_read_eeprom_byte ++** ++** Function called to read an octet in the EEPROM. ++** ++** This function is used by acxpci_e_probe to check if the ++** connected card is a legal one or not. ++** ++** Arguments: ++** adev ptr to acx_device structure ++** addr address to read in the EEPROM ++** charbuf ptr to a char. This is where the read octet ++** will be stored ++*/ ++int ++acxpci_read_eeprom_byte(acx_device_t *adev, u32 addr, u8 *charbuf) ++{ ++ int result; ++ int count; ++ ++ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); ++ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); ++ ++ count = 0xffff; ++ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { ++ /* scheduling away instead of CPU burning loop ++ * doesn't seem to work here at all: ++ * awful delay, sometimes also failure. ++ * Doesn't matter anyway (only small delay). */ ++ if (unlikely(!--count)) { ++ printk("%s: timeout waiting for EEPROM read\n", ++ adev->ndev->name); ++ result = NOT_OK; ++ goto fail; ++ } ++ cpu_relax(); ++ } ++ ++ *charbuf = read_reg8(adev, IO_ACX_EEPROM_DATA); ++ log(L_DEBUG, "EEPROM at 0x%04X = 0x%02X\n", addr, *charbuf); ++ result = OK; ++ ++fail: ++ return result; ++} ++ ++ ++/*********************************************************************** ++** We don't lock hw accesses here since we never r/w eeprom in IRQ ++** Note: this function sleeps only because of GFP_KERNEL alloc ++*/ ++#ifdef UNUSED ++int ++acxpci_s_write_eeprom(acx_device_t *adev, u32 addr, u32 len, const u8 *charbuf) ++{ ++ u8 *data_verify = NULL; ++ unsigned long flags; ++ int count, i; ++ int result = NOT_OK; ++ u16 gpio_orig; ++ ++ printk("acx: WARNING! I would write to EEPROM now. " ++ "Since I really DON'T want to unless you know " ++ "what you're doing (THIS CODE WILL PROBABLY " ++ "NOT WORK YET!), I will abort that now. And " ++ "definitely make sure to make a " ++ "/proc/driver/acx_wlan0_eeprom backup copy first!!! " ++ "(the EEPROM content includes the PCI config header!! " ++ "If you kill important stuff, then you WILL " ++ "get in trouble and people DID get in trouble already)\n"); ++ return OK; ++ ++ FN_ENTER; ++ ++ data_verify = kmalloc(len, GFP_KERNEL); ++ if (!data_verify) { ++ goto end; ++ } ++ ++ /* first we need to enable the OE (EEPROM Output Enable) GPIO line ++ * to be able to write to the EEPROM. ++ * NOTE: an EEPROM writing success has been reported, ++ * but you probably have to modify GPIO_OUT, too, ++ * and you probably need to activate a different GPIO ++ * line instead! */ ++ gpio_orig = read_reg16(adev, IO_ACX_GPIO_OE); ++ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig & ~1); ++ write_flush(adev); ++ ++ /* ok, now start writing the data out */ ++ for (i = 0; i < len; i++) { ++ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); ++ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); ++ write_reg32(adev, IO_ACX_EEPROM_DATA, *(charbuf + i)); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_EEPROM_CTL, 1); ++ ++ count = 0xffff; ++ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { ++ if (unlikely(!--count)) { ++ printk("WARNING, DANGER!!! " ++ "Timeout waiting for EEPROM write\n"); ++ goto end; ++ } ++ cpu_relax(); ++ } ++ } ++ ++ /* disable EEPROM writing */ ++ write_reg16(adev, IO_ACX_GPIO_OE, gpio_orig); ++ write_flush(adev); ++ ++ /* now start a verification run */ ++ for (i = 0; i < len; i++) { ++ write_reg32(adev, IO_ACX_EEPROM_CFG, 0); ++ write_reg32(adev, IO_ACX_EEPROM_ADDR, addr + i); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_EEPROM_CTL, 2); ++ ++ count = 0xffff; ++ while (read_reg16(adev, IO_ACX_EEPROM_CTL)) { ++ if (unlikely(!--count)) { ++ printk("timeout waiting for EEPROM read\n"); ++ goto end; ++ } ++ cpu_relax(); ++ } ++ ++ data_verify[i] = read_reg16(adev, IO_ACX_EEPROM_DATA); ++ } ++ ++ if (0 == memcmp(charbuf, data_verify, len)) ++ result = OK; /* read data matches, success */ ++ ++end: ++ kfree(data_verify); ++ FN_EXIT1(result); ++ return result; ++} ++#endif /* UNUSED */ ++ ++ ++/*********************************************************************** ++** acxpci_s_read_phy_reg ++** ++** Messing with rx/tx disabling and enabling here ++** (write_reg32(adev, IO_ACX_ENABLE, 0b000000xx)) kills traffic ++*/ ++int ++acxpci_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) ++{ ++ int result = NOT_OK; ++ int count; ++ ++ FN_ENTER; ++ ++ write_reg32(adev, IO_ACX_PHY_ADDR, reg); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_PHY_CTL, 2); ++ ++ count = 0xffff; ++ while (read_reg32(adev, IO_ACX_PHY_CTL)) { ++ /* scheduling away instead of CPU burning loop ++ * doesn't seem to work here at all: ++ * awful delay, sometimes also failure. ++ * Doesn't matter anyway (only small delay). */ ++ if (unlikely(!--count)) { ++ printk("%s: timeout waiting for phy read\n", ++ adev->ndev->name); ++ *charbuf = 0; ++ goto fail; ++ } ++ cpu_relax(); ++ } ++ ++ log(L_DEBUG, "count was %u\n", count); ++ *charbuf = read_reg8(adev, IO_ACX_PHY_DATA); ++ ++ log(L_DEBUG, "radio PHY at 0x%04X = 0x%02X\n", *charbuf, reg); ++ result = OK; ++ goto fail; /* silence compiler warning */ ++fail: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acxpci_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) ++{ ++ FN_ENTER; ++ ++ /* mprusko said that 32bit accesses result in distorted sensitivity ++ * on his card. Unconfirmed, looks like it's not true (most likely since we ++ * now properly flush writes). */ ++ write_reg32(adev, IO_ACX_PHY_DATA, value); ++ write_reg32(adev, IO_ACX_PHY_ADDR, reg); ++ write_flush(adev); ++ write_reg32(adev, IO_ACX_PHY_CTL, 1); ++ write_flush(adev); ++ log(L_DEBUG, "radio PHY write 0x%02X at 0x%04X\n", value, reg); ++ ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++#define NO_AUTO_INCREMENT 1 ++ ++/*********************************************************************** ++** acxpci_s_write_fw ++** ++** Write the firmware image into the card. ++** ++** Arguments: ++** adev wlan device structure ++** fw_image firmware image. ++** ++** Returns: ++** 1 firmware image corrupted ++** 0 success ++*/ ++static int ++acxpci_s_write_fw(acx_device_t *adev, const firmware_image_t *fw_image, u32 offset) ++{ ++ int len, size; ++ u32 sum, v32; ++ /* we skip the first four bytes which contain the control sum */ ++ const u8 *p = (u8*)fw_image + 4; ++ ++ /* start the image checksum by adding the image size value */ ++ sum = p[0]+p[1]+p[2]+p[3]; ++ p += 4; ++ ++ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); ++ ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ ++#else ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ ++ write_flush(adev); ++#endif ++ ++ len = 0; ++ size = le32_to_cpu(fw_image->size) & (~3); ++ ++ while (likely(len < size)) { ++ v32 = be32_to_cpu(*(u32*)p); ++ sum += p[0]+p[1]+p[2]+p[3]; ++ p += 4; ++ len += 4; ++ ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); ++ write_flush(adev); ++#endif ++ write_reg32(adev, IO_ACX_SLV_MEM_DATA, v32); ++ } ++ ++ log(L_DEBUG, "firmware written, size:%d sum1:%x sum2:%x\n", ++ size, sum, le32_to_cpu(fw_image->chksum)); ++ ++ /* compare our checksum with the stored image checksum */ ++ return (sum != le32_to_cpu(fw_image->chksum)); ++} ++ ++ ++/*********************************************************************** ++** acxpci_s_validate_fw ++** ++** Compare the firmware image given with ++** the firmware image written into the card. ++** ++** Arguments: ++** adev wlan device structure ++** fw_image firmware image. ++** ++** Returns: ++** NOT_OK firmware image corrupted or not correctly written ++** OK success ++*/ ++static int ++acxpci_s_validate_fw(acx_device_t *adev, const firmware_image_t *fw_image, ++ u32 offset) ++{ ++ u32 sum, v32, w32; ++ int len, size; ++ int result = OK; ++ /* we skip the first four bytes which contain the control sum */ ++ const u8 *p = (u8*)fw_image + 4; ++ ++ /* start the image checksum by adding the image size value */ ++ sum = p[0]+p[1]+p[2]+p[3]; ++ p += 4; ++ ++ write_reg32(adev, IO_ACX_SLV_END_CTL, 0); ++ ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 0); /* use basic mode */ ++#else ++ write_reg32(adev, IO_ACX_SLV_MEM_CTL, 1); /* use autoincrement mode */ ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset); /* configure start address */ ++#endif ++ ++ len = 0; ++ size = le32_to_cpu(fw_image->size) & (~3); ++ ++ while (likely(len < size)) { ++ v32 = be32_to_cpu(*(u32*)p); ++ p += 4; ++ len += 4; ++ ++#if NO_AUTO_INCREMENT ++ write_reg32(adev, IO_ACX_SLV_MEM_ADDR, offset + len - 4); ++#endif ++ w32 = read_reg32(adev, IO_ACX_SLV_MEM_DATA); ++ ++ if (unlikely(w32 != v32)) { ++ printk("acx: FATAL: firmware upload: " ++ "data parts at offset %d don't match (0x%08X vs. 0x%08X)! " ++ "I/O timing issues or defective memory, with DWL-xx0+? " ++ "ACX_IO_WIDTH=16 may help. Please report\n", ++ len, v32, w32); ++ result = NOT_OK; ++ break; ++ } ++ ++ sum += (u8)w32 + (u8)(w32>>8) + (u8)(w32>>16) + (u8)(w32>>24); ++ } ++ ++ /* sum control verification */ ++ if (result != NOT_OK) { ++ if (sum != le32_to_cpu(fw_image->chksum)) { ++ printk("acx: FATAL: firmware upload: " ++ "checksums don't match!\n"); ++ result = NOT_OK; ++ } ++ } ++ ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxpci_s_upload_fw ++** ++** Called from acx_reset_dev ++*/ ++static int ++acxpci_s_upload_fw(acx_device_t *adev) ++{ ++ firmware_image_t *fw_image = NULL; ++ int res = NOT_OK; ++ int try; ++ u32 file_size; ++ char filename[sizeof("tiacx1NNcNN")]; ++ ++ FN_ENTER; ++ ++ /* print exact chipset and radio ID to make sure people really get a clue on which files exactly they are supposed to provide, ++ * since firmware loading is the biggest enduser PITA with these chipsets. ++ * Not printing radio ID in 0xHEX in order to not confuse them into wrong file naming */ ++ printk( "acx: need to load firmware for acx1%02d chipset with radio ID %02x, please provide via firmware hotplug:\n" ++ "acx: either one file only (ombined firmware image file, radio-specific) or two files (radio-less base image file *plus* separate adio-specific extension file)\n", ++ IS_ACX111(adev)*11, adev->radio_type); ++ ++ /* Try combined, then main image */ ++ adev->need_radio_fw = 0; ++ snprintf(filename, sizeof(filename), "tiacx1%02dc%02X", ++ IS_ACX111(adev)*11, adev->radio_type); ++ ++ fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size); ++ if (!fw_image) { ++ adev->need_radio_fw = 1; ++ filename[sizeof("tiacx1NN")-1] = '\0'; ++ fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size); ++ if (!fw_image) { ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++ } ++ } ++ ++ for (try = 1; try <= 5; try++) { ++ res = acxpci_s_write_fw(adev, fw_image, 0); ++ log(L_DEBUG|L_INIT, "acx_write_fw (main/combined): %d\n", res); ++ if (OK == res) { ++ res = acxpci_s_validate_fw(adev, fw_image, 0); ++ log(L_DEBUG|L_INIT, "acx_validate_fw " ++ "(main/combined): %d\n", res); ++ } ++ ++ if (OK == res) { ++ SET_BIT(adev->dev_state_mask, ACX_STATE_FW_LOADED); ++ break; ++ } ++ printk("acx: firmware upload attempt #%d FAILED, " ++ "retrying...\n", try); ++ acx_s_msleep(1000); /* better wait for a while... */ ++ } ++ ++ vfree(fw_image); ++ ++ FN_EXIT1(res); ++ return res; ++} ++ ++ ++/*********************************************************************** ++** acxpci_s_upload_radio ++** ++** Uploads the appropriate radio module firmware into the card. ++*/ ++int ++acxpci_s_upload_radio(acx_device_t *adev) ++{ ++ acx_ie_memmap_t mm; ++ firmware_image_t *radio_image; ++ acx_cmd_radioinit_t radioinit; ++ int res = NOT_OK; ++ int try; ++ u32 offset; ++ u32 size; ++ char filename[sizeof("tiacx1NNrNN")]; ++ ++ if (!adev->need_radio_fw) return OK; ++ ++ FN_ENTER; ++ ++ acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); ++ offset = le32_to_cpu(mm.CodeEnd); ++ ++ snprintf(filename, sizeof(filename), "tiacx1%02dr%02X", ++ IS_ACX111(adev)*11, ++ adev->radio_type); ++ radio_image = acx_s_read_fw(&adev->pdev->dev, filename, &size); ++ if (!radio_image) { ++ printk("acx: can't load radio module '%s'\n", filename); ++ goto fail; ++ } ++ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); ++ ++ for (try = 1; try <= 5; try++) { ++ res = acxpci_s_write_fw(adev, radio_image, offset); ++ log(L_DEBUG|L_INIT, "acx_write_fw (radio): %d\n", res); ++ if (OK == res) { ++ res = acxpci_s_validate_fw(adev, radio_image, offset); ++ log(L_DEBUG|L_INIT, "acx_validate_fw (radio): %d\n", res); ++ } ++ ++ if (OK == res) ++ break; ++ printk("acx: radio firmware upload attempt #%d FAILED, " ++ "retrying...\n", try); ++ acx_s_msleep(1000); /* better wait for a while... */ ++ } ++ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); ++ radioinit.offset = cpu_to_le32(offset); ++ /* no endian conversion needed, remains in card CPU area: */ ++ radioinit.len = radio_image->size; ++ ++ vfree(radio_image); ++ ++ if (OK != res) ++ goto fail; ++ ++ /* will take a moment so let's have a big timeout */ ++ acx_s_issue_cmd_timeo(adev, ACX1xx_CMD_RADIOINIT, ++ &radioinit, sizeof(radioinit), CMD_TIMEOUT_MS(1000)); ++ ++ res = acx_s_interrogate(adev, &mm, ACX1xx_IE_MEMORY_MAP); ++fail: ++ FN_EXIT1(res); ++ return res; ++} ++ ++ ++/*********************************************************************** ++** acxpci_l_reset_mac ++** ++** MAC will be reset ++** Call context: reset_dev ++*/ ++static void ++acxpci_l_reset_mac(acx_device_t *adev) ++{ ++ u16 temp; ++ ++ FN_ENTER; ++ ++ /* halt eCPU */ ++ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; ++ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); ++ ++ /* now do soft reset of eCPU, set bit */ ++ temp = read_reg16(adev, IO_ACX_SOFT_RESET) | 0x1; ++ log(L_DEBUG, "%s: enable soft reset...\n", __func__); ++ write_reg16(adev, IO_ACX_SOFT_RESET, temp); ++ write_flush(adev); ++ ++ /* now clear bit again: deassert eCPU reset */ ++ log(L_DEBUG, "%s: disable soft reset and go to init mode...\n", __func__); ++ write_reg16(adev, IO_ACX_SOFT_RESET, temp & ~0x1); ++ ++ /* now start a burst read from initial EEPROM */ ++ temp = read_reg16(adev, IO_ACX_EE_START) | 0x1; ++ write_reg16(adev, IO_ACX_EE_START, temp); ++ write_flush(adev); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxpci_s_verify_init ++*/ ++static int ++acxpci_s_verify_init(acx_device_t *adev) ++{ ++ int result = NOT_OK; ++ unsigned long timeout; ++ ++ FN_ENTER; ++ ++ timeout = jiffies + 2*HZ; ++ for (;;) { ++ u16 irqstat = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); ++ if (irqstat & HOST_INT_FCS_THRESHOLD) { ++ result = OK; ++ write_reg16(adev, IO_ACX_IRQ_ACK, HOST_INT_FCS_THRESHOLD); ++ break; ++ } ++ if (time_after(jiffies, timeout)) ++ break; ++ /* Init may take up to ~0.5 sec total */ ++ acx_s_msleep(50); ++ } ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** A few low-level helpers ++** ++** Note: these functions are not protected by lock ++** and thus are never allowed to be called from IRQ. ++** Also they must not race with fw upload which uses same hw regs ++*/ ++ ++/*********************************************************************** ++** acxpci_write_cmd_type_status ++*/ ++ ++static inline void ++acxpci_write_cmd_type_status(acx_device_t *adev, u16 type, u16 status) ++{ ++ writel(type | (status << 16), adev->cmd_area); ++ write_flush(adev); ++} ++ ++ ++/*********************************************************************** ++** acxpci_read_cmd_type_status ++*/ ++static u32 ++acxpci_read_cmd_type_status(acx_device_t *adev) ++{ ++ u32 cmd_type, cmd_status; ++ ++ cmd_type = readl(adev->cmd_area); ++ cmd_status = (cmd_type >> 16); ++ cmd_type = (u16)cmd_type; ++ ++ log(L_CTL, "cmd_type:%04X cmd_status:%04X [%s]\n", ++ cmd_type, cmd_status, ++ acx_cmd_status_str(cmd_status)); ++ ++ return cmd_status; ++} ++ ++ ++/*********************************************************************** ++** acxpci_s_reset_dev ++** ++** Arguments: ++** netdevice that contains the adev variable ++** Returns: ++** NOT_OK on fail ++** OK on success ++** Side effects: ++** device is hard reset ++** Call context: ++** acxpci_e_probe ++** Comment: ++** This resets the device using low level hardware calls ++** as well as uploads and verifies the firmware to the card ++*/ ++ ++static inline void ++init_mboxes(acx_device_t *adev) ++{ ++ u32 cmd_offs, info_offs; ++ ++ cmd_offs = read_reg32(adev, IO_ACX_CMD_MAILBOX_OFFS); ++ info_offs = read_reg32(adev, IO_ACX_INFO_MAILBOX_OFFS); ++ adev->cmd_area = (u8 *)adev->iobase2 + cmd_offs; ++ adev->info_area = (u8 *)adev->iobase2 + info_offs; ++ log(L_DEBUG, "iobase2=%p\n" ++ "cmd_mbox_offset=%X cmd_area=%p\n" ++ "info_mbox_offset=%X info_area=%p\n", ++ adev->iobase2, ++ cmd_offs, adev->cmd_area, ++ info_offs, adev->info_area); ++} ++ ++ ++static inline void ++read_eeprom_area(acx_device_t *adev) ++{ ++#if ACX_DEBUG > 1 ++ int offs; ++ u8 tmp; ++ ++ for (offs = 0x8c; offs < 0xb9; offs++) ++ acxpci_read_eeprom_byte(adev, offs, &tmp); ++#endif ++} ++ ++ ++static int ++acxpci_s_reset_dev(acx_device_t *adev) ++{ ++ const char* msg = ""; ++ unsigned long flags; ++ int result = NOT_OK; ++ u16 hardware_info; ++ u16 ecpu_ctrl; ++ int count; ++ ++ FN_ENTER; ++ ++ /* reset the device to make sure the eCPU is stopped ++ * to upload the firmware correctly */ ++ ++ acx_lock(adev, flags); ++ ++ acxpci_l_reset_mac(adev); ++ ++ ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1; ++ if (!ecpu_ctrl) { ++ msg = "eCPU is already running. "; ++ goto end_unlock; ++ } ++ ++#ifdef WE_DONT_NEED_THAT_DO_WE ++ if (read_reg16(adev, IO_ACX_SOR_CFG) & 2) { ++ /* eCPU most likely means "embedded CPU" */ ++ msg = "eCPU did not start after boot from flash. "; ++ goto end_unlock; ++ } ++ ++ /* check sense on reset flags */ ++ if (read_reg16(adev, IO_ACX_SOR_CFG) & 0x10) { ++ printk("%s: eCPU did not start after boot (SOR), " ++ "is this fatal?\n", adev->ndev->name); ++ } ++#endif ++ /* scan, if any, is stopped now, setting corresponding IRQ bit */ ++ adev->irq_status |= HOST_INT_SCAN_COMPLETE; ++ ++ acx_unlock(adev, flags); ++ ++ /* need to know radio type before fw load */ ++ /* Need to wait for arrival of this information in a loop, ++ * most probably since eCPU runs some init code from EEPROM ++ * (started burst read in reset_mac()) which also ++ * sets the radio type ID */ ++ ++ count = 0xffff; ++ do { ++ hardware_info = read_reg16(adev, IO_ACX_EEPROM_INFORMATION); ++ if (!--count) { ++ msg = "eCPU didn't indicate radio type"; ++ goto end_fail; ++ } ++ cpu_relax(); ++ } while (!(hardware_info & 0xff00)); /* radio type still zero? */ ++ ++ /* printk("DEBUG: count %d\n", count); */ ++ adev->form_factor = hardware_info & 0xff; ++ adev->radio_type = hardware_info >> 8; ++ ++ /* load the firmware */ ++ if (OK != acxpci_s_upload_fw(adev)) ++ goto end_fail; ++ ++ /* acx_s_msleep(10); this one really shouldn't be required */ ++ ++ /* now start eCPU by clearing bit */ ++ write_reg16(adev, IO_ACX_ECPU_CTRL, ecpu_ctrl & ~0x1); ++ log(L_DEBUG, "booted eCPU up and waiting for completion...\n"); ++ ++ /* wait for eCPU bootup */ ++ if (OK != acxpci_s_verify_init(adev)) { ++ msg = "timeout waiting for eCPU. "; ++ goto end_fail; ++ } ++ log(L_DEBUG, "eCPU has woken up, card is ready to be configured\n"); ++ ++ init_mboxes(adev); ++ acxpci_write_cmd_type_status(adev, 0, 0); ++ ++ /* test that EEPROM is readable */ ++ read_eeprom_area(adev); ++ ++ result = OK; ++ goto end; ++ ++/* Finish error message. Indicate which function failed */ ++end_unlock: ++ acx_unlock(adev, flags); ++end_fail: ++ printk("acx: %sreset_dev() FAILED\n", msg); ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxpci_s_issue_cmd_timeo ++** ++** Sends command to fw, extract result ++** ++** NB: we do _not_ take lock inside, so be sure to not touch anything ++** which may interfere with IRQ handler operation ++** ++** TODO: busy wait is a bit silly, so: ++** 1) stop doing many iters - go to sleep after first ++** 2) go to waitqueue based approach: wait, not poll! ++*/ ++#undef FUNC ++#define FUNC "issue_cmd" ++ ++#if !ACX_DEBUG ++int ++acxpci_s_issue_cmd_timeo( ++ acx_device_t *adev, ++ unsigned int cmd, ++ void *buffer, ++ unsigned buflen, ++ unsigned cmd_timeout) ++{ ++#else ++int ++acxpci_s_issue_cmd_timeo_debug( ++ acx_device_t *adev, ++ unsigned cmd, ++ void *buffer, ++ unsigned buflen, ++ unsigned cmd_timeout, ++ const char* cmdstr) ++{ ++ unsigned long start = jiffies; ++#endif ++ const char *devname; ++ unsigned counter; ++ u16 irqtype; ++ u16 cmd_status; ++ unsigned long timeout; ++ ++ FN_ENTER; ++ ++ devname = adev->ndev->name; ++ if (!devname || !devname[0] || devname[4]=='%') ++ devname = "acx"; ++ ++ log(L_CTL, FUNC"(cmd:%s,buflen:%u,timeout:%ums,type:0x%04X)\n", ++ cmdstr, buflen, cmd_timeout, ++ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); ++ ++ if (!(adev->dev_state_mask & ACX_STATE_FW_LOADED)) { ++ printk("%s: "FUNC"(): firmware is not loaded yet, " ++ "cannot execute commands!\n", devname); ++ goto bad; ++ } ++ ++ if ((acx_debug & L_DEBUG) && (cmd != ACX1xx_CMD_INTERROGATE)) { ++ printk("input buffer (len=%u):\n", buflen); ++ acx_dump_bytes(buffer, buflen); ++ } ++ ++ /* wait for firmware to become idle for our command submission */ ++ timeout = HZ/5; ++ counter = (timeout * 1000 / HZ) - 1; /* in ms */ ++ timeout += jiffies; ++ do { ++ cmd_status = acxpci_read_cmd_type_status(adev); ++ /* Test for IDLE state */ ++ if (!cmd_status) ++ break; ++ if (counter % 8 == 0) { ++ if (time_after(jiffies, timeout)) { ++ counter = 0; ++ break; ++ } ++ /* we waited 8 iterations, no luck. Sleep 8 ms */ ++ acx_s_msleep(8); ++ } ++ } while (likely(--counter)); ++ ++ if (!counter) { ++ /* the card doesn't get idle, we're in trouble */ ++ printk("%s: "FUNC"(): cmd_status is not IDLE: 0x%04X!=0\n", ++ devname, cmd_status); ++ goto bad; ++ } else if (counter < 190) { /* if waited >10ms... */ ++ log(L_CTL|L_DEBUG, FUNC"(): waited for IDLE %dms. " ++ "Please report\n", 199 - counter); ++ } ++ ++ /* now write the parameters of the command if needed */ ++ if (buffer && buflen) { ++ /* if it's an INTERROGATE command, just pass the length ++ * of parameters to read, as data */ ++#if CMD_DISCOVERY ++ if (cmd == ACX1xx_CMD_INTERROGATE) ++ memset_io(adev->cmd_area + 4, 0xAA, buflen); ++#endif ++ /* adev->cmd_area points to PCI device's memory, not to RAM! */ ++ memcpy_toio(adev->cmd_area + 4, buffer, ++ (cmd == ACX1xx_CMD_INTERROGATE) ? 4 : buflen); ++ } ++ /* now write the actual command type */ ++ acxpci_write_cmd_type_status(adev, cmd, 0); ++ /* execute command */ ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_CMD); ++ write_flush(adev); ++ ++ /* wait for firmware to process command */ ++ ++ /* Ensure nonzero and not too large timeout. ++ ** Also converts e.g. 100->99, 200->199 ++ ** which is nice but not essential */ ++ cmd_timeout = (cmd_timeout-1) | 1; ++ if (unlikely(cmd_timeout > 1199)) ++ cmd_timeout = 1199; ++ /* clear CMD_COMPLETE bit. can be set only by IRQ handler: */ ++ adev->irq_status &= ~HOST_INT_CMD_COMPLETE; ++ ++ /* we schedule away sometimes (timeout can be large) */ ++ counter = cmd_timeout; ++ timeout = jiffies + cmd_timeout * HZ / 1000; ++ do { ++ if (!adev->irqs_active) { /* IRQ disabled: poll */ ++ irqtype = read_reg16(adev, IO_ACX_IRQ_STATUS_NON_DES); ++ if (irqtype & HOST_INT_CMD_COMPLETE) { ++ write_reg16(adev, IO_ACX_IRQ_ACK, ++ HOST_INT_CMD_COMPLETE); ++ break; ++ } ++ } else { /* Wait when IRQ will set the bit */ ++ irqtype = adev->irq_status; ++ if (irqtype & HOST_INT_CMD_COMPLETE) ++ break; ++ } ++ ++ if (counter % 8 == 0) { ++ if (time_after(jiffies, timeout)) { ++ counter = 0; ++ break; ++ } ++ /* we waited 8 iterations, no luck. Sleep 8 ms */ ++ acx_s_msleep(8); ++ } ++ } while (likely(--counter)); ++ ++ /* save state for debugging */ ++ cmd_status = acxpci_read_cmd_type_status(adev); ++ ++ /* put the card in IDLE state */ ++ acxpci_write_cmd_type_status(adev, 0, 0); ++ ++ if (!counter) { /* timed out! */ ++ printk("%s: "FUNC"(): timed out %s for CMD_COMPLETE. " ++ "irq bits:0x%04X irq_status:0x%04X timeout:%dms " ++ "cmd_status:%d (%s)\n", ++ devname, (adev->irqs_active) ? "waiting" : "polling", ++ irqtype, adev->irq_status, cmd_timeout, ++ cmd_status, acx_cmd_status_str(cmd_status)); ++ goto bad; ++ } else if (cmd_timeout - counter > 30) { /* if waited >30ms... */ ++ log(L_CTL|L_DEBUG, FUNC"(): %s for CMD_COMPLETE %dms. " ++ "count:%d. Please report\n", ++ (adev->irqs_active) ? "waited" : "polled", ++ cmd_timeout - counter, counter); ++ } ++ ++ if (1 != cmd_status) { /* it is not a 'Success' */ ++ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s). " ++ "Took %dms of %d\n", ++ devname, cmd_status, acx_cmd_status_str(cmd_status), ++ cmd_timeout - counter, cmd_timeout); ++ /* zero out result buffer ++ * WARNING: this will trash stack in case of illegally large input ++ * length! */ ++ if (buffer && buflen) ++ memset(buffer, 0, buflen); ++ goto bad; ++ } ++ ++ /* read in result parameters if needed */ ++ if (buffer && buflen && (cmd == ACX1xx_CMD_INTERROGATE)) { ++ /* adev->cmd_area points to PCI device's memory, not to RAM! */ ++ memcpy_fromio(buffer, adev->cmd_area + 4, buflen); ++ if (acx_debug & L_DEBUG) { ++ printk("output buffer (len=%u): ", buflen); ++ acx_dump_bytes(buffer, buflen); ++ } ++ } ++/* ok: */ ++ log(L_CTL, FUNC"(%s): took %ld jiffies to complete\n", ++ cmdstr, jiffies - start); ++ FN_EXIT1(OK); ++ return OK; ++ ++bad: ++ /* Give enough info so that callers can avoid ++ ** printing their own diagnostic messages */ ++#if ACX_DEBUG ++ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); ++#else ++ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); ++#endif ++ dump_stack(); ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++#ifdef NONESSENTIAL_FEATURES ++typedef struct device_id { ++ unsigned char id[6]; ++ char *descr; ++ char *type; ++} device_id_t; ++ ++static const device_id_t ++device_ids[] = ++{ ++ { ++ {'G', 'l', 'o', 'b', 'a', 'l'}, ++ NULL, ++ NULL, ++ }, ++ { ++ {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, ++ "uninitialized", ++ "SpeedStream SS1021 or Gigafast WF721-AEX" ++ }, ++ { ++ {0x80, 0x81, 0x82, 0x83, 0x84, 0x85}, ++ "non-standard", ++ "DrayTek Vigor 520" ++ }, ++ { ++ {'?', '?', '?', '?', '?', '?'}, ++ "non-standard", ++ "Level One WPC-0200" ++ }, ++ { ++ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, ++ "empty", ++ "DWL-650+ variant" ++ } ++}; ++ ++static void ++acx_show_card_eeprom_id(acx_device_t *adev) ++{ ++ unsigned char buffer[CARD_EEPROM_ID_SIZE]; ++ int i; ++ ++ memset(&buffer, 0, CARD_EEPROM_ID_SIZE); ++ /* use direct EEPROM access */ ++ for (i = 0; i < CARD_EEPROM_ID_SIZE; i++) { ++ if (OK != acxpci_read_eeprom_byte(adev, ++ ACX100_EEPROM_ID_OFFSET + i, ++ &buffer[i])) { ++ printk("acx: reading EEPROM FAILED\n"); ++ break; ++ } ++ } ++ ++ for (i = 0; i < VEC_SIZE(device_ids); i++) { ++ if (!memcmp(&buffer, device_ids[i].id, CARD_EEPROM_ID_SIZE)) { ++ if (device_ids[i].descr) { ++ printk("acx: EEPROM card ID string check " ++ "found %s card ID: is this %s?\n", ++ device_ids[i].descr, device_ids[i].type); ++ } ++ break; ++ } ++ } ++ if (i == VEC_SIZE(device_ids)) { ++ printk("acx: EEPROM card ID string check found " ++ "unknown card: expected 'Global', got '%.*s\'. " ++ "Please report\n", CARD_EEPROM_ID_SIZE, buffer); ++ } ++} ++#endif /* NONESSENTIAL_FEATURES */ ++ ++ ++/*********************************************************************** ++** acxpci_free_desc_queues ++** ++** Releases the queues that have been allocated, the ++** others have been initialised to NULL so this ++** function can be used if only part of the queues were allocated. ++*/ ++ ++static inline void ++free_coherent(struct pci_dev *hwdev, size_t size, ++ void *vaddr, dma_addr_t dma_handle) ++{ ++ dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, ++ size, vaddr, dma_handle); ++} ++ ++void ++acxpci_free_desc_queues(acx_device_t *adev) ++{ ++#define ACX_FREE_QUEUE(size, ptr, phyaddr) \ ++ if (ptr) { \ ++ free_coherent(0, size, ptr, phyaddr); \ ++ ptr = NULL; \ ++ size = 0; \ ++ } ++ ++ FN_ENTER; ++ ++ ACX_FREE_QUEUE(adev->txhostdesc_area_size, adev->txhostdesc_start, adev->txhostdesc_startphy); ++ ACX_FREE_QUEUE(adev->txbuf_area_size, adev->txbuf_start, adev->txbuf_startphy); ++ ++ adev->txdesc_start = NULL; ++ ++ ACX_FREE_QUEUE(adev->rxhostdesc_area_size, adev->rxhostdesc_start, adev->rxhostdesc_startphy); ++ ACX_FREE_QUEUE(adev->rxbuf_area_size, adev->rxbuf_start, adev->rxbuf_startphy); ++ ++ adev->rxdesc_start = NULL; ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxpci_s_delete_dma_regions ++*/ ++static void ++acxpci_s_delete_dma_regions(acx_device_t *adev) ++{ ++ unsigned long flags; ++ ++ FN_ENTER; ++ /* disable radio Tx/Rx. Shouldn't we use the firmware commands ++ * here instead? Or are we that much down the road that it's no ++ * longer possible here? */ ++ write_reg16(adev, IO_ACX_ENABLE, 0); ++ ++ acx_s_msleep(100); ++ ++ acx_lock(adev, flags); ++ acxpci_free_desc_queues(adev); ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxpci_e_probe ++** ++** Probe routine called when a PCI device w/ matching ID is found. ++** Here's the sequence: ++** - Allocate the PCI resources. ++** - Read the PCMCIA attribute memory to make sure we have a WLAN card ++** - Reset the MAC ++** - Initialize the dev and wlan data ++** - Initialize the MAC ++** ++** pdev - ptr to pci device structure containing info about pci configuration ++** id - ptr to the device id entry that matched this device ++*/ ++static const u16 ++IO_ACX100[] = ++{ ++ 0x0000, /* IO_ACX_SOFT_RESET */ ++ ++ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ ++ 0x0018, /* IO_ACX_SLV_MEM_DATA */ ++ 0x001c, /* IO_ACX_SLV_MEM_CTL */ ++ 0x0020, /* IO_ACX_SLV_END_CTL */ ++ ++ 0x0034, /* IO_ACX_FEMR */ ++ ++ 0x007c, /* IO_ACX_INT_TRIG */ ++ 0x0098, /* IO_ACX_IRQ_MASK */ ++ 0x00a4, /* IO_ACX_IRQ_STATUS_NON_DES */ ++ 0x00a8, /* IO_ACX_IRQ_STATUS_CLEAR */ ++ 0x00ac, /* IO_ACX_IRQ_ACK */ ++ 0x00b0, /* IO_ACX_HINT_TRIG */ ++ ++ 0x0104, /* IO_ACX_ENABLE */ ++ ++ 0x0250, /* IO_ACX_EEPROM_CTL */ ++ 0x0254, /* IO_ACX_EEPROM_ADDR */ ++ 0x0258, /* IO_ACX_EEPROM_DATA */ ++ 0x025c, /* IO_ACX_EEPROM_CFG */ ++ ++ 0x0268, /* IO_ACX_PHY_ADDR */ ++ 0x026c, /* IO_ACX_PHY_DATA */ ++ 0x0270, /* IO_ACX_PHY_CTL */ ++ ++ 0x0290, /* IO_ACX_GPIO_OE */ ++ ++ 0x0298, /* IO_ACX_GPIO_OUT */ ++ ++ 0x02a4, /* IO_ACX_CMD_MAILBOX_OFFS */ ++ 0x02a8, /* IO_ACX_INFO_MAILBOX_OFFS */ ++ 0x02ac, /* IO_ACX_EEPROM_INFORMATION */ ++ ++ 0x02d0, /* IO_ACX_EE_START */ ++ 0x02d4, /* IO_ACX_SOR_CFG */ ++ 0x02d8 /* IO_ACX_ECPU_CTRL */ ++}; ++ ++static const u16 ++IO_ACX111[] = ++{ ++ 0x0000, /* IO_ACX_SOFT_RESET */ ++ ++ 0x0014, /* IO_ACX_SLV_MEM_ADDR */ ++ 0x0018, /* IO_ACX_SLV_MEM_DATA */ ++ 0x001c, /* IO_ACX_SLV_MEM_CTL */ ++ 0x0020, /* IO_ACX_SLV_END_CTL */ ++ ++ 0x0034, /* IO_ACX_FEMR */ ++ ++ 0x00b4, /* IO_ACX_INT_TRIG */ ++ 0x00d4, /* IO_ACX_IRQ_MASK */ ++ /* we do mean NON_DES (0xf0), not NON_DES_MASK which is at 0xe0: */ ++ 0x00f0, /* IO_ACX_IRQ_STATUS_NON_DES */ ++ 0x00e4, /* IO_ACX_IRQ_STATUS_CLEAR */ ++ 0x00e8, /* IO_ACX_IRQ_ACK */ ++ 0x00ec, /* IO_ACX_HINT_TRIG */ ++ ++ 0x01d0, /* IO_ACX_ENABLE */ ++ ++ 0x0338, /* IO_ACX_EEPROM_CTL */ ++ 0x033c, /* IO_ACX_EEPROM_ADDR */ ++ 0x0340, /* IO_ACX_EEPROM_DATA */ ++ 0x0344, /* IO_ACX_EEPROM_CFG */ ++ ++ 0x0350, /* IO_ACX_PHY_ADDR */ ++ 0x0354, /* IO_ACX_PHY_DATA */ ++ 0x0358, /* IO_ACX_PHY_CTL */ ++ ++ 0x0374, /* IO_ACX_GPIO_OE */ ++ ++ 0x037c, /* IO_ACX_GPIO_OUT */ ++ ++ 0x0388, /* IO_ACX_CMD_MAILBOX_OFFS */ ++ 0x038c, /* IO_ACX_INFO_MAILBOX_OFFS */ ++ 0x0390, /* IO_ACX_EEPROM_INFORMATION */ ++ ++ 0x0100, /* IO_ACX_EE_START */ ++ 0x0104, /* IO_ACX_SOR_CFG */ ++ 0x0108, /* IO_ACX_ECPU_CTRL */ ++}; ++ ++static void ++dummy_netdev_init(struct net_device *ndev) {} ++ ++static int __devinit ++acxpci_e_probe(struct pci_dev *pdev, const struct pci_device_id *id) ++{ ++ acx111_ie_configoption_t co; ++ unsigned long mem_region1 = 0; ++ unsigned long mem_region2 = 0; ++ unsigned long mem_region1_size; ++ unsigned long mem_region2_size; ++ unsigned long phymem1; ++ unsigned long phymem2; ++ void *mem1 = NULL; ++ void *mem2 = NULL; ++ acx_device_t *adev = NULL; ++ struct net_device *ndev = NULL; ++ const char *chip_name; ++ int result = -EIO; ++ int err; ++ u8 chip_type; ++ ++ FN_ENTER; ++ ++ /* Enable the PCI device */ ++ if (pci_enable_device(pdev)) { ++ printk("acx: pci_enable_device() FAILED\n"); ++ result = -ENODEV; ++ goto fail_pci_enable_device; ++ } ++ ++ /* enable busmastering (required for CardBus) */ ++ pci_set_master(pdev); ++ ++ /* FIXME: prism54 calls pci_set_mwi() here, ++ * should we do/support the same? */ ++ ++ /* chiptype is u8 but id->driver_data is ulong ++ ** Works for now (possible values are 1 and 2) */ ++ chip_type = (u8)id->driver_data; ++ /* acx100 and acx111 have different PCI memory regions */ ++ if (chip_type == CHIPTYPE_ACX100) { ++ chip_name = "ACX100"; ++ mem_region1 = PCI_ACX100_REGION1; ++ mem_region1_size = PCI_ACX100_REGION1_SIZE; ++ ++ mem_region2 = PCI_ACX100_REGION2; ++ mem_region2_size = PCI_ACX100_REGION2_SIZE; ++ } else if (chip_type == CHIPTYPE_ACX111) { ++ chip_name = "ACX111"; ++ mem_region1 = PCI_ACX111_REGION1; ++ mem_region1_size = PCI_ACX111_REGION1_SIZE; ++ ++ mem_region2 = PCI_ACX111_REGION2; ++ mem_region2_size = PCI_ACX111_REGION2_SIZE; ++ } else { ++ printk("acx: unknown chip type 0x%04X\n", chip_type); ++ goto fail_unknown_chiptype; ++ } ++ ++ /* Figure out our resources */ ++ phymem1 = pci_resource_start(pdev, mem_region1); ++ phymem2 = pci_resource_start(pdev, mem_region2); ++ if (!request_mem_region(phymem1, pci_resource_len(pdev, mem_region1), "acx_1")) { ++ printk("acx: cannot reserve PCI memory region 1 (are you sure " ++ "you have CardBus support in kernel?)\n"); ++ goto fail_request_mem_region1; ++ } ++ if (!request_mem_region(phymem2, pci_resource_len(pdev, mem_region2), "acx_2")) { ++ printk("acx: cannot reserve PCI memory region 2\n"); ++ goto fail_request_mem_region2; ++ } ++ ++ /* this used to be ioremap(), but ioremap_nocache() ++ * is much less risky, right? (and slower?) ++ * FIXME: we may want to go back to cached variant if it's ++ * certain that our code really properly handles ++ * cached operation (memory barriers, volatile?, ...) ++ * (but always keep this comment here regardless!) ++ * Possibly make this a driver config setting? */ ++ ++ mem1 = ioremap_nocache(phymem1, mem_region1_size); ++ if (!mem1) { ++ printk("acx: ioremap() FAILED\n"); ++ goto fail_ioremap1; ++ } ++ mem2 = ioremap_nocache(phymem2, mem_region2_size); ++ if (!mem2) { ++ printk("acx: ioremap() #2 FAILED\n"); ++ goto fail_ioremap2; ++ } ++ ++ printk("acx: found %s-based wireless network card at %s, irq:%d, " ++ "phymem1:0x%lX, phymem2:0x%lX, mem1:0x%p, mem1_size:%ld, " ++ "mem2:0x%p, mem2_size:%ld\n", ++ chip_name, pci_name(pdev), pdev->irq, phymem1, phymem2, ++ mem1, mem_region1_size, ++ mem2, mem_region2_size); ++ log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug); ++ ++ if (0 == pdev->irq) { ++ printk("acx: can't use IRQ 0\n"); ++ goto fail_irq; ++ } ++ ++ ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init); ++ /* (NB: memsets to 0 entire area) */ ++ if (!ndev) { ++ printk("acx: no memory for netdevice struct\n"); ++ goto fail_alloc_netdev; ++ } ++ ++ ether_setup(ndev); ++ ndev->open = &acxpci_e_open; ++ ndev->stop = &acxpci_e_close; ++ ndev->hard_start_xmit = &acx_i_start_xmit; ++ ndev->get_stats = &acx_e_get_stats; ++#if IW_HANDLER_VERSION <= 5 ++ ndev->get_wireless_stats = &acx_e_get_wireless_stats; ++#endif ++ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; ++ ndev->set_multicast_list = &acxpci_i_set_multicast_list; ++ ndev->tx_timeout = &acxpci_i_tx_timeout; ++ ndev->change_mtu = &acx_e_change_mtu; ++ ndev->watchdog_timeo = 4 * HZ; ++ ndev->irq = pdev->irq; ++ ndev->base_addr = pci_resource_start(pdev, 0); ++ ++ adev = ndev2adev(ndev); ++ spin_lock_init(&adev->lock); /* initial state: unlocked */ ++ /* We do not start with downed sem: we want PARANOID_LOCKING to work */ ++ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ ++ /* since nobody can see new netdev yet, we can as well ++ ** just _presume_ that we're under sem (instead of actually taking it): */ ++ /* acx_sem_lock(adev); */ ++ adev->pdev = pdev; ++ adev->ndev = ndev; ++ adev->dev_type = DEVTYPE_PCI; ++ adev->chip_type = chip_type; ++ adev->chip_name = chip_name; ++ adev->io = (CHIPTYPE_ACX100 == chip_type) ? IO_ACX100 : IO_ACX111; ++ adev->membase = phymem1; ++ adev->iobase = mem1; ++ adev->membase2 = phymem2; ++ adev->iobase2 = mem2; ++ /* to find crashes due to weird driver access ++ * to unconfigured interface (ifup) */ ++ adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead; ++ ++#ifdef NONESSENTIAL_FEATURES ++ acx_show_card_eeprom_id(adev); ++#endif /* NONESSENTIAL_FEATURES */ ++ ++#ifdef SET_MODULE_OWNER ++ SET_MODULE_OWNER(ndev); ++#endif ++ SET_NETDEV_DEV(ndev, &pdev->dev); ++ ++ log(L_IRQ|L_INIT, "using IRQ %d\n", pdev->irq); ++ ++ /* need to be able to restore PCI state after a suspend */ ++ pci_save_state(pdev); ++ pci_set_drvdata(pdev, ndev); ++ ++ /* ok, pci setup is finished, now start initializing the card */ ++ ++ /* NB: read_reg() reads may return bogus data before reset_dev(), ++ * since the firmware which directly controls large parts of the I/O ++ * registers isn't initialized yet. ++ * acx100 seems to be more affected than acx111 */ ++ if (OK != acxpci_s_reset_dev(adev)) ++ goto fail_reset; ++ ++ if (IS_ACX100(adev)) { ++ /* ACX100: configopt struct in cmd mailbox - directly after reset */ ++ memcpy_fromio(&co, adev->cmd_area, sizeof(co)); ++ } ++ ++ if (OK != acx_s_init_mac(adev)) ++ goto fail_init_mac; ++ ++ if (IS_ACX111(adev)) { ++ /* ACX111: configopt struct needs to be queried after full init */ ++ acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS); ++ } ++ ++/* TODO: merge them into one function, they are called just once and are the same for pci & usb */ ++ if (OK != acxpci_read_eeprom_byte(adev, 0x05, &adev->eeprom_version)) ++ goto fail_read_eeprom_version; ++ ++ acx_s_parse_configoption(adev, &co); ++ acx_s_set_defaults(adev); ++ acx_s_get_firmware_version(adev); /* needs to be after acx_s_init_mac() */ ++ acx_display_hardware_details(adev); ++ ++ /* Register the card, AFTER everything else has been set up, ++ * since otherwise an ioctl could step on our feet due to ++ * firmware operations happening in parallel or uninitialized data */ ++ err = register_netdev(ndev); ++ if (OK != err) { ++ printk("acx: register_netdev() FAILED: %d\n", err); ++ goto fail_register_netdev; ++ } ++ ++ acx_proc_register_entries(ndev); ++ ++ /* Now we have our device, so make sure the kernel doesn't try ++ * to send packets even though we're not associated to a network yet */ ++ acx_stop_queue(ndev, "on probe"); ++ acx_carrier_off(ndev, "on probe"); ++ ++ /* after register_netdev() userspace may start working with dev ++ * (in particular, on other CPUs), we only need to up the sem */ ++ /* acx_sem_unlock(adev); */ ++ ++ printk("acx "ACX_RELEASE": net device %s, driver compiled " ++ "against wireless extensions %d and Linux %s\n", ++ ndev->name, WIRELESS_EXT, UTS_RELEASE); ++ ++#if CMD_DISCOVERY ++ great_inquisitor(adev); ++#endif ++ ++ result = OK; ++ goto done; ++ ++ /* error paths: undo everything in reverse order... */ ++ ++fail_register_netdev: ++ ++ acxpci_s_delete_dma_regions(adev); ++ pci_set_drvdata(pdev, NULL); ++ ++fail_init_mac: ++fail_read_eeprom_version: ++fail_reset: ++ ++ free_netdev(ndev); ++fail_alloc_netdev: ++fail_irq: ++ ++ iounmap(mem2); ++fail_ioremap2: ++ ++ iounmap(mem1); ++fail_ioremap1: ++ ++ release_mem_region(pci_resource_start(pdev, mem_region2), ++ pci_resource_len(pdev, mem_region2)); ++fail_request_mem_region2: ++ ++ release_mem_region(pci_resource_start(pdev, mem_region1), ++ pci_resource_len(pdev, mem_region1)); ++fail_request_mem_region1: ++fail_unknown_chiptype: ++ ++ pci_disable_device(pdev); ++fail_pci_enable_device: ++ ++ pci_set_power_state(pdev, PCI_D3hot); ++ ++done: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxpci_e_remove ++** ++** Shut device down (if not hot unplugged) ++** and deallocate PCI resources for the acx chip. ++** ++** pdev - ptr to PCI device structure containing info about pci configuration ++*/ ++static void __devexit ++acxpci_e_remove(struct pci_dev *pdev) ++{ ++ struct net_device *ndev; ++ acx_device_t *adev; ++ unsigned long mem_region1, mem_region2; ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ ndev = (struct net_device*) pci_get_drvdata(pdev); ++ if (!ndev) { ++ log(L_DEBUG, "%s: card is unused. Skipping any release code\n", ++ __func__); ++ goto end; ++ } ++ ++ adev = ndev2adev(ndev); ++ ++ /* If device wasn't hot unplugged... */ ++ if (adev_present(adev)) { ++ ++ acx_sem_lock(adev); ++ ++ /* disable both Tx and Rx to shut radio down properly */ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); ++ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); ++ ++#ifdef REDUNDANT ++ /* put the eCPU to sleep to save power ++ * Halting is not possible currently, ++ * since not supported by all firmware versions */ ++ acx_s_issue_cmd(adev, ACX100_CMD_SLEEP, NULL, 0); ++#endif ++ acx_lock(adev, flags); ++ /* disable power LED to save power :-) */ ++ log(L_INIT, "switching off power LED to save power\n"); ++ acxpci_l_power_led(adev, 0); ++ /* stop our eCPU */ ++ if (IS_ACX111(adev)) { ++ /* FIXME: does this actually keep halting the eCPU? ++ * I don't think so... ++ */ ++ acxpci_l_reset_mac(adev); ++ } else { ++ u16 temp; ++ /* halt eCPU */ ++ temp = read_reg16(adev, IO_ACX_ECPU_CTRL) | 0x1; ++ write_reg16(adev, IO_ACX_ECPU_CTRL, temp); ++ write_flush(adev); ++ } ++ acx_unlock(adev, flags); ++ ++ acx_sem_unlock(adev); ++ } ++ ++ /* unregister the device to not let the kernel ++ * (e.g. ioctls) access a half-deconfigured device ++ * NB: this will cause acxpci_e_close() to be called, ++ * thus we shouldn't call it under sem! */ ++ log(L_INIT, "removing device %s\n", ndev->name); ++ unregister_netdev(ndev); ++ ++ /* unregister_netdev ensures that no references to us left. ++ * For paranoid reasons we continue to follow the rules */ ++ acx_sem_lock(adev); ++ ++ if (adev->dev_state_mask & ACX_STATE_IFACE_UP) { ++ acxpci_s_down(ndev); ++ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ } ++ ++ acx_proc_unregister_entries(ndev); ++ ++ if (IS_ACX100(adev)) { ++ mem_region1 = PCI_ACX100_REGION1; ++ mem_region2 = PCI_ACX100_REGION2; ++ } else { ++ mem_region1 = PCI_ACX111_REGION1; ++ mem_region2 = PCI_ACX111_REGION2; ++ } ++ ++ /* finally, clean up PCI bus state */ ++ acxpci_s_delete_dma_regions(adev); ++ if (adev->iobase) iounmap(adev->iobase); ++ if (adev->iobase2) iounmap(adev->iobase2); ++ release_mem_region(pci_resource_start(pdev, mem_region1), ++ pci_resource_len(pdev, mem_region1)); ++ release_mem_region(pci_resource_start(pdev, mem_region2), ++ pci_resource_len(pdev, mem_region2)); ++ pci_disable_device(pdev); ++ ++ /* remove dev registration */ ++ pci_set_drvdata(pdev, NULL); ++ ++ acx_sem_unlock(adev); ++ ++ /* Free netdev (quite late, ++ * since otherwise we might get caught off-guard ++ * by a netdev timeout handler execution ++ * expecting to see a working dev...) */ ++ free_netdev(ndev); ++ ++ /* put device into ACPI D3 mode (shutdown) */ ++ pci_set_power_state(pdev, PCI_D3hot); ++ ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** TODO: PM code needs to be fixed / debugged / tested. ++*/ ++#ifdef CONFIG_PM ++static int ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) ++acxpci_e_suspend(struct pci_dev *pdev, pm_message_t state) ++#else ++acxpci_e_suspend(struct pci_dev *pdev, u32 state) ++#endif ++{ ++ struct net_device *ndev = pci_get_drvdata(pdev); ++ acx_device_t *adev; ++ ++ FN_ENTER; ++ printk("acx: suspend handler is experimental!\n"); ++ printk("sus: dev %p\n", ndev); ++ ++ if (!netif_running(ndev)) ++ goto end; ++ ++ adev = ndev2adev(ndev); ++ printk("sus: adev %p\n", adev); ++ ++ acx_sem_lock(adev); ++ ++ netif_device_detach(ndev); /* this one cannot sleep */ ++ acxpci_s_down(ndev); ++ /* down() does not set it to 0xffff, but here we really want that */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); ++ write_reg16(adev, IO_ACX_FEMR, 0x0); ++ acxpci_s_delete_dma_regions(adev); ++ pci_save_state(pdev); ++ pci_set_power_state(pdev, PCI_D3hot); ++ ++ acx_sem_unlock(adev); ++end: ++ FN_EXIT0; ++ return OK; ++} ++ ++ ++static int ++acxpci_e_resume(struct pci_dev *pdev) ++{ ++ struct net_device *ndev = pci_get_drvdata(pdev); ++ acx_device_t *adev; ++ ++ FN_ENTER; ++ ++ printk("acx: resume handler is experimental!\n"); ++ printk("rsm: got dev %p\n", ndev); ++ ++ if (!netif_running(ndev)) ++ goto end; ++ ++ adev = ndev2adev(ndev); ++ printk("rsm: got adev %p\n", adev); ++ ++ acx_sem_lock(adev); ++ ++ pci_set_power_state(pdev, PCI_D0); ++ printk("rsm: power state PCI_D0 set\n"); ++ pci_restore_state(pdev); ++ printk("rsm: PCI state restored\n"); ++ ++ if (OK != acxpci_s_reset_dev(adev)) ++ goto end_unlock; ++ printk("rsm: device reset done\n"); ++ if (OK != acx_s_init_mac(adev)) ++ goto end_unlock; ++ printk("rsm: init MAC done\n"); ++ ++ acxpci_s_up(ndev); ++ printk("rsm: acx up done\n"); ++ ++ /* now even reload all card parameters as they were before suspend, ++ * and possibly be back in the network again already :-) */ ++ if (ACX_STATE_IFACE_UP & adev->dev_state_mask) { ++ adev->set_mask = GETSET_ALL; ++ acx_s_update_card_settings(adev); ++ printk("rsm: settings updated\n"); ++ } ++ netif_device_attach(ndev); ++ printk("rsm: device attached\n"); ++ ++end_unlock: ++ acx_sem_unlock(adev); ++end: ++ /* we need to return OK here anyway, right? */ ++ FN_EXIT0; ++ return OK; ++} ++#endif /* CONFIG_PM */ ++ ++ ++/*********************************************************************** ++** acxpci_s_up ++** ++** This function is called by acxpci_e_open (when ifconfig sets the device as up) ++** ++** Side effects: ++** - Enables on-card interrupt requests ++** - calls acx_s_start ++*/ ++ ++static void ++enable_acx_irq(acx_device_t *adev) ++{ ++ FN_ENTER; ++ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask); ++ write_reg16(adev, IO_ACX_FEMR, 0x8000); ++ adev->irqs_active = 1; ++ FN_EXIT0; ++} ++ ++static void ++acxpci_s_up(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ enable_acx_irq(adev); ++ acx_unlock(adev, flags); ++ ++ /* acx fw < 1.9.3.e has a hardware timer, and older drivers ++ ** used to use it. But we don't do that anymore, our OS ++ ** has reliable software timers */ ++ init_timer(&adev->mgmt_timer); ++ adev->mgmt_timer.function = acx_i_timer; ++ adev->mgmt_timer.data = (unsigned long)adev; ++ ++ /* Need to set ACX_STATE_IFACE_UP first, or else ++ ** timer won't be started by acx_set_status() */ ++ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_2_STA: ++ /* actual scan cmd will happen in start() */ ++ acx_set_status(adev, ACX_STATUS_1_SCANNING); break; ++ case ACX_MODE_3_AP: ++ case ACX_MODE_MONITOR: ++ acx_set_status(adev, ACX_STATUS_4_ASSOCIATED); break; ++ } ++ ++ acx_s_start(adev); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxpci_s_down ++** ++** NB: device may be already hot unplugged if called from acxpci_e_remove() ++** ++** Disables on-card interrupt request, stops softirq and timer, stops queue, ++** sets status == STOPPED ++*/ ++ ++static void ++disable_acx_irq(acx_device_t *adev) ++{ ++ FN_ENTER; ++ ++ /* I guess mask is not 0xffff because acx100 won't signal ++ ** cmd completion then (needed for ifup). ++ ** Someone with acx100 please confirm */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, adev->irq_mask_off); ++ write_reg16(adev, IO_ACX_FEMR, 0x0); ++ adev->irqs_active = 0; ++ FN_EXIT0; ++} ++ ++static void ++acxpci_s_down(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ /* Disable IRQs first, so that IRQs cannot race with us */ ++ /* then wait until interrupts have finished executing on other CPUs */ ++ acx_lock(adev, flags); ++ disable_acx_irq(adev); ++ synchronize_irq(adev->pdev->irq); ++ acx_unlock(adev, flags); ++ ++ /* we really don't want to have an asynchronous tasklet disturb us ++ ** after something vital for its job has been shut down, so ++ ** end all remaining work now. ++ ** ++ ** NB: carrier_off (done by set_status below) would lead to ++ ** not yet fully understood deadlock in FLUSH_SCHEDULED_WORK(). ++ ** That's why we do FLUSH first. ++ ** ++ ** NB2: we have a bad locking bug here: FLUSH_SCHEDULED_WORK() ++ ** waits for acx_e_after_interrupt_task to complete if it is running ++ ** on another CPU, but acx_e_after_interrupt_task ++ ** will sleep on sem forever, because it is taken by us! ++ ** Work around that by temporary sem unlock. ++ ** This will fail miserably if we'll be hit by concurrent ++ ** iwconfig or something in between. TODO! */ ++ acx_sem_unlock(adev); ++ FLUSH_SCHEDULED_WORK(); ++ acx_sem_lock(adev); ++ ++ /* This is possible: ++ ** FLUSH_SCHEDULED_WORK -> acx_e_after_interrupt_task -> ++ ** -> set_status(ASSOCIATED) -> wake_queue() ++ ** That's why we stop queue _after_ FLUSH_SCHEDULED_WORK ++ ** lock/unlock is just paranoia, maybe not needed */ ++ acx_lock(adev, flags); ++ acx_stop_queue(ndev, "on ifdown"); ++ acx_set_status(adev, ACX_STATUS_0_STOPPED); ++ acx_unlock(adev, flags); ++ ++ /* kernel/timer.c says it's illegal to del_timer_sync() ++ ** a timer which restarts itself. We guarantee this cannot ++ ** ever happen because acx_i_timer() never does this if ++ ** status is ACX_STATUS_0_STOPPED */ ++ del_timer_sync(&adev->mgmt_timer); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxpci_e_open ++** ++** Called as a result of SIOCSIFFLAGS ioctl changing the flags bit IFF_UP ++** from clear to set. In other words: ifconfig up. ++** ++** Returns: ++** 0 success ++** >0 f/w reported error ++** <0 driver reported error ++*/ ++static int ++acxpci_e_open(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ int result = OK; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ acx_init_task_scheduler(adev); ++ ++/* TODO: pci_set_power_state(pdev, PCI_D0); ? */ ++ ++ /* request shared IRQ handler */ ++ if (request_irq(ndev->irq, acxpci_i_interrupt, SA_SHIRQ, ndev->name, ndev)) { ++ printk("%s: request_irq FAILED\n", ndev->name); ++ result = -EAGAIN; ++ goto done; ++ } ++ log(L_DEBUG|L_IRQ, "request_irq %d successful\n", ndev->irq); ++ ++ /* ifup device */ ++ acxpci_s_up(ndev); ++ ++ /* We don't currently have to do anything else. ++ * The setup of the MAC should be subsequently completed via ++ * the mlme commands. ++ * Higher layers know we're ready from dev->start==1 and ++ * dev->tbusy==0. Our rx path knows to pass up received/ ++ * frames because of dev->flags&IFF_UP is true. ++ */ ++done: ++ acx_sem_unlock(adev); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxpci_e_close ++** ++** Called as a result of SIOCSIIFFLAGS ioctl changing the flags bit IFF_UP ++** from set to clear. I.e. called by "ifconfig DEV down" ++** ++** Returns: ++** 0 success ++** >0 f/w reported error ++** <0 driver reported error ++*/ ++static int ++acxpci_e_close(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ /* ifdown device */ ++ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ if (netif_device_present(ndev)) { ++ acxpci_s_down(ndev); ++ } ++ ++ /* disable all IRQs, release shared IRQ handler */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); ++ write_reg16(adev, IO_ACX_FEMR, 0x0); ++ free_irq(ndev->irq, ndev); ++ ++/* TODO: pci_set_power_state(pdev, PCI_D3hot); ? */ ++ ++ /* We currently don't have to do anything else. ++ * Higher layers know we're not ready from dev->start==0 and ++ * dev->tbusy==1. Our rx path knows to not pass up received ++ * frames because of dev->flags&IFF_UP is false. ++ */ ++ acx_sem_unlock(adev); ++ ++ log(L_INIT, "closed device\n"); ++ FN_EXIT0; ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acxpci_i_tx_timeout ++** ++** Called from network core. Must not sleep! ++*/ ++static void ++acxpci_i_tx_timeout(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ unsigned int tx_num_cleaned; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ ++ /* clean processed tx descs, they may have been completely full */ ++ tx_num_cleaned = acxpci_l_clean_txdesc(adev); ++ ++ /* nothing cleaned, yet (almost) no free buffers available? ++ * --> clean all tx descs, no matter which status!! ++ * Note that I strongly suspect that doing emergency cleaning ++ * may confuse the firmware. This is a last ditch effort to get ++ * ANYTHING to work again... ++ * ++ * TODO: it's best to simply reset & reinit hw from scratch... ++ */ ++ if ((adev->tx_free <= TX_EMERG_CLEAN) && (tx_num_cleaned == 0)) { ++ printk("%s: FAILED to free any of the many full tx buffers. " ++ "Switching to emergency freeing. " ++ "Please report!\n", ndev->name); ++ acxpci_l_clean_txdesc_emergency(adev); ++ } ++ ++ if (acx_queue_stopped(ndev) && (ACX_STATUS_4_ASSOCIATED == adev->status)) ++ acx_wake_queue(ndev, "after tx timeout"); ++ ++ /* stall may have happened due to radio drift, so recalib radio */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); ++ ++ /* do unimportant work last */ ++ printk("%s: tx timeout!\n", ndev->name); ++ adev->stats.tx_errors++; ++ ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxpci_i_set_multicast_list ++** FIXME: most likely needs refinement ++*/ ++static void ++acxpci_i_set_multicast_list(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ ++ /* firmwares don't have allmulti capability, ++ * so just use promiscuous mode instead in this case. */ ++ if (ndev->flags & (IFF_PROMISC|IFF_ALLMULTI)) { ++ SET_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); ++ CLEAR_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); ++ SET_BIT(adev->set_mask, SET_RXCONFIG); ++ /* let kernel know in case *we* needed to set promiscuous */ ++ ndev->flags |= (IFF_PROMISC|IFF_ALLMULTI); ++ } else { ++ CLEAR_BIT(adev->rx_config_1, RX_CFG1_RCV_PROMISCUOUS); ++ SET_BIT(adev->rx_config_1, RX_CFG1_FILTER_ALL_MULTI); ++ SET_BIT(adev->set_mask, SET_RXCONFIG); ++ ndev->flags &= ~(IFF_PROMISC|IFF_ALLMULTI); ++ } ++ ++ /* cannot update card settings directly here, atomic context */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_UPDATE_CARD_CFG); ++ ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++ ++ ++/*************************************************************** ++** acxpci_l_process_rxdesc ++** ++** Called directly and only from the IRQ handler ++*/ ++ ++#if !ACX_DEBUG ++static inline void log_rxbuffer(const acx_device_t *adev) {} ++#else ++static void ++log_rxbuffer(const acx_device_t *adev) ++{ ++ register const struct rxhostdesc *rxhostdesc; ++ int i; ++ /* no FN_ENTER here, we don't want that */ ++ ++ rxhostdesc = adev->rxhostdesc_start; ++ if (unlikely(!rxhostdesc)) return; ++ for (i = 0; i < RX_CNT; i++) { ++ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) ++ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) ++ printk("rx: buf %d full\n", i); ++ rxhostdesc++; ++ } ++} ++#endif ++ ++static void ++acxpci_l_process_rxdesc(acx_device_t *adev) ++{ ++ register rxhostdesc_t *hostdesc; ++ unsigned count, tail; ++ ++ FN_ENTER; ++ ++ if (unlikely(acx_debug & L_BUFR)) ++ log_rxbuffer(adev); ++ ++ /* First, have a loop to determine the first descriptor that's ++ * full, just in case there's a mismatch between our current ++ * rx_tail and the full descriptor we're supposed to handle. */ ++ tail = adev->rx_tail; ++ count = RX_CNT; ++ while (1) { ++ hostdesc = &adev->rxhostdesc_start[tail]; ++ /* advance tail regardless of outcome of the below test */ ++ tail = (tail + 1) % RX_CNT; ++ ++ if ((hostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) ++ && (hostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) ++ break; /* found it! */ ++ ++ if (unlikely(!--count)) /* hmm, no luck: all descs empty, bail out */ ++ goto end; ++ } ++ ++ /* now process descriptors, starting with the first we figured out */ ++ while (1) { ++ log(L_BUFR, "rx: tail=%u Ctl_16=%04X Status=%08X\n", ++ tail, hostdesc->Ctl_16, hostdesc->Status); ++ ++ acx_l_process_rxbuf(adev, hostdesc->data); ++ ++ hostdesc->Status = 0; ++ /* flush all writes before adapter sees CTL_HOSTOWN change */ ++ wmb(); ++ /* Host no longer owns this, needs to be LAST */ ++ CLEAR_BIT(hostdesc->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); ++ ++ /* ok, descriptor is handled, now check the next descriptor */ ++ hostdesc = &adev->rxhostdesc_start[tail]; ++ ++ /* if next descriptor is empty, then bail out */ ++ if (!(hostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) ++ || !(hostdesc->Status & cpu_to_le32(DESC_STATUS_FULL))) ++ break; ++ ++ tail = (tail + 1) % RX_CNT; ++ } ++end: ++ adev->rx_tail = tail; ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxpci_i_interrupt ++** ++** IRQ handler (atomic context, must not sleep, blah, blah) ++*/ ++ ++/* scan is complete. all frames now on the receive queue are valid */ ++#define INFO_SCAN_COMPLETE 0x0001 ++#define INFO_WEP_KEY_NOT_FOUND 0x0002 ++/* hw has been reset as the result of a watchdog timer timeout */ ++#define INFO_WATCH_DOG_RESET 0x0003 ++/* failed to send out NULL frame from PS mode notification to AP */ ++/* recommended action: try entering 802.11 PS mode again */ ++#define INFO_PS_FAIL 0x0004 ++/* encryption/decryption process on a packet failed */ ++#define INFO_IV_ICV_FAILURE 0x0005 ++ ++/* Info mailbox format: ++2 bytes: type ++2 bytes: status ++more bytes may follow ++ rumors say about status: ++ 0x0000 info available (set by hw) ++ 0x0001 information received (must be set by host) ++ 0x1000 info available, mailbox overflowed (messages lost) (set by hw) ++ but in practice we've seen: ++ 0x9000 when we did not set status to 0x0001 on prev message ++ 0x1001 when we did set it ++ 0x0000 was never seen ++ conclusion: this is really a bitfield: ++ 0x1000 is 'info available' bit ++ 'mailbox overflowed' bit is 0x8000, not 0x1000 ++ value of 0x0000 probably means that there are no messages at all ++ P.S. I dunno how in hell hw is supposed to notice that messages are lost - ++ it does NOT clear bit 0x0001, and this bit will probably stay forever set ++ after we set it once. Let's hope this will be fixed in firmware someday ++*/ ++ ++static void ++handle_info_irq(acx_device_t *adev) ++{ ++#if ACX_DEBUG ++ static const char * const info_type_msg[] = { ++ "(unknown)", ++ "scan complete", ++ "WEP key not found", ++ "internal watchdog reset was done", ++ "failed to send powersave (NULL frame) notification to AP", ++ "encrypt/decrypt on a packet has failed", ++ "TKIP tx keys disabled", ++ "TKIP rx keys disabled", ++ "TKIP rx: key ID not found", ++ "???", ++ "???", ++ "???", ++ "???", ++ "???", ++ "???", ++ "???", ++ "TKIP IV value exceeds thresh" ++ }; ++#endif ++ u32 info_type, info_status; ++ ++ info_type = readl(adev->info_area); ++ info_status = (info_type >> 16); ++ info_type = (u16)info_type; ++ ++ /* inform fw that we have read this info message */ ++ writel(info_type | 0x00010000, adev->info_area); ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_INFOACK); ++ write_flush(adev); ++ ++ log(L_CTL, "info_type:%04X info_status:%04X\n", ++ info_type, info_status); ++ ++ log(L_IRQ, "got Info IRQ: status %04X type %04X: %s\n", ++ info_status, info_type, ++ info_type_msg[(info_type >= VEC_SIZE(info_type_msg)) ? ++ 0 : info_type] ++ ); ++} ++ ++ ++static void ++log_unusual_irq(u16 irqtype) { ++ /* ++ if (!printk_ratelimit()) ++ return; ++ */ ++ ++ printk("acx: got"); ++ if (irqtype & HOST_INT_RX_DATA) { ++ printk(" Rx_Data"); ++ } ++ /* HOST_INT_TX_COMPLETE */ ++ if (irqtype & HOST_INT_TX_XFER) { ++ printk(" Tx_Xfer"); ++ } ++ /* HOST_INT_RX_COMPLETE */ ++ if (irqtype & HOST_INT_DTIM) { ++ printk(" DTIM"); ++ } ++ if (irqtype & HOST_INT_BEACON) { ++ printk(" Beacon"); ++ } ++ if (irqtype & HOST_INT_TIMER) { ++ log(L_IRQ, " Timer"); ++ } ++ if (irqtype & HOST_INT_KEY_NOT_FOUND) { ++ printk(" Key_Not_Found"); ++ } ++ if (irqtype & HOST_INT_IV_ICV_FAILURE) { ++ printk(" IV_ICV_Failure (crypto)"); ++ } ++ /* HOST_INT_CMD_COMPLETE */ ++ /* HOST_INT_INFO */ ++ if (irqtype & HOST_INT_OVERFLOW) { ++ printk(" Overflow"); ++ } ++ if (irqtype & HOST_INT_PROCESS_ERROR) { ++ printk(" Process_Error"); ++ } ++ /* HOST_INT_SCAN_COMPLETE */ ++ if (irqtype & HOST_INT_FCS_THRESHOLD) { ++ printk(" FCS_Threshold"); ++ } ++ if (irqtype & HOST_INT_UNKNOWN) { ++ printk(" Unknown"); ++ } ++ printk(" IRQ(s)\n"); ++} ++ ++ ++static void ++update_link_quality_led(acx_device_t *adev) ++{ ++ int qual; ++ ++ qual = acx_signal_determine_quality(adev->wstats.qual.level, adev->wstats.qual.noise); ++ if (qual > adev->brange_max_quality) ++ qual = adev->brange_max_quality; ++ ++ if (time_after(jiffies, adev->brange_time_last_state_change + ++ (HZ/2 - HZ/2 * (unsigned long)qual / adev->brange_max_quality ) )) { ++ acxpci_l_power_led(adev, (adev->brange_last_state == 0)); ++ adev->brange_last_state ^= 1; /* toggle */ ++ adev->brange_time_last_state_change = jiffies; ++ } ++} ++ ++ ++#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* a la orinoco.c */ ++ ++static irqreturn_t ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) ++acxpci_i_interrupt(int irq, void *dev_id) ++#else ++acxpci_i_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++#endif ++{ ++ acx_device_t *adev; ++ unsigned long flags; ++ unsigned int irqcount = MAX_IRQLOOPS_PER_JIFFY; ++ register u16 irqtype; ++ u16 unmasked; ++ ++ adev = ndev2adev((struct net_device*)dev_id); ++ ++ /* LOCKING: can just spin_lock() since IRQs are disabled anyway. ++ * I am paranoid */ ++ acx_lock(adev, flags); ++ ++ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); ++ if (unlikely(0xffff == unmasked)) { ++ /* 0xffff value hints at missing hardware, ++ * so don't do anything. ++ * Not very clean, but other drivers do the same... */ ++ log(L_IRQ, "IRQ type:FFFF - device removed? IRQ_NONE\n"); ++ goto none; ++ } ++ ++ /* We will check only "interesting" IRQ types */ ++ irqtype = unmasked & ~adev->irq_mask; ++ if (!irqtype) { ++ /* We are on a shared IRQ line and it wasn't our IRQ */ ++ log(L_IRQ, "IRQ type:%04X, mask:%04X - all are masked, IRQ_NONE\n", ++ unmasked, adev->irq_mask); ++ goto none; ++ } ++ ++ /* Done here because IRQ_NONEs taking three lines of log ++ ** drive me crazy */ ++ FN_ENTER; ++ ++#define IRQ_ITERATE 1 ++#if IRQ_ITERATE ++if (jiffies != adev->irq_last_jiffies) { ++ adev->irq_loops_this_jiffy = 0; ++ adev->irq_last_jiffies = jiffies; ++} ++ ++/* safety condition; we'll normally abort loop below ++ * in case no IRQ type occurred */ ++while (likely(--irqcount)) { ++#endif ++ /* ACK all IRQs ASAP */ ++ write_reg16(adev, IO_ACX_IRQ_ACK, 0xffff); ++ ++ log(L_IRQ, "IRQ type:%04X, mask:%04X, type & ~mask:%04X\n", ++ unmasked, adev->irq_mask, irqtype); ++ ++ /* Handle most important IRQ types first */ ++ if (irqtype & HOST_INT_RX_COMPLETE) { ++ log(L_IRQ, "got Rx_Complete IRQ\n"); ++ acxpci_l_process_rxdesc(adev); ++ } ++ if (irqtype & HOST_INT_TX_COMPLETE) { ++ log(L_IRQ, "got Tx_Complete IRQ\n"); ++ /* don't clean up on each Tx complete, wait a bit ++ * unless we're going towards full, in which case ++ * we do it immediately, too (otherwise we might lockup ++ * with a full Tx buffer if we go into ++ * acxpci_l_clean_txdesc() at a time when we won't wakeup ++ * the net queue in there for some reason...) */ ++ if (adev->tx_free <= TX_START_CLEAN) { ++#if TX_CLEANUP_IN_SOFTIRQ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_TX_CLEANUP); ++#else ++ acxpci_l_clean_txdesc(adev); ++#endif ++ } ++ } ++ ++ /* Less frequent ones */ ++ if (irqtype & (0 ++ | HOST_INT_CMD_COMPLETE ++ | HOST_INT_INFO ++ | HOST_INT_SCAN_COMPLETE ++ )) { ++ if (irqtype & HOST_INT_CMD_COMPLETE) { ++ log(L_IRQ, "got Command_Complete IRQ\n"); ++ /* save the state for the running issue_cmd() */ ++ SET_BIT(adev->irq_status, HOST_INT_CMD_COMPLETE); ++ } ++ if (irqtype & HOST_INT_INFO) { ++ handle_info_irq(adev); ++ } ++ if (irqtype & HOST_INT_SCAN_COMPLETE) { ++ log(L_IRQ, "got Scan_Complete IRQ\n"); ++ /* need to do that in process context */ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_COMPLETE_SCAN); ++ /* remember that fw is not scanning anymore */ ++ SET_BIT(adev->irq_status, HOST_INT_SCAN_COMPLETE); ++ } ++ } ++ ++ /* These we just log, but either they happen rarely ++ * or we keep them masked out */ ++ if (irqtype & (0 ++ | HOST_INT_RX_DATA ++ /* | HOST_INT_TX_COMPLETE */ ++ | HOST_INT_TX_XFER ++ /* | HOST_INT_RX_COMPLETE */ ++ | HOST_INT_DTIM ++ | HOST_INT_BEACON ++ | HOST_INT_TIMER ++ | HOST_INT_KEY_NOT_FOUND ++ | HOST_INT_IV_ICV_FAILURE ++ /* | HOST_INT_CMD_COMPLETE */ ++ /* | HOST_INT_INFO */ ++ | HOST_INT_OVERFLOW ++ | HOST_INT_PROCESS_ERROR ++ /* | HOST_INT_SCAN_COMPLETE */ ++ | HOST_INT_FCS_THRESHOLD ++ | HOST_INT_UNKNOWN ++ )) { ++ log_unusual_irq(irqtype); ++ } ++ ++#if IRQ_ITERATE ++ unmasked = read_reg16(adev, IO_ACX_IRQ_STATUS_CLEAR); ++ irqtype = unmasked & ~adev->irq_mask; ++ /* Bail out if no new IRQ bits or if all are masked out */ ++ if (!irqtype) ++ break; ++ ++ if (unlikely(++adev->irq_loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY)) { ++ printk(KERN_ERR "acx: too many interrupts per jiffy!\n"); ++ /* Looks like card floods us with IRQs! Try to stop that */ ++ write_reg16(adev, IO_ACX_IRQ_MASK, 0xffff); ++ /* This will short-circuit all future attempts to handle IRQ. ++ * We cant do much more... */ ++ adev->irq_mask = 0; ++ break; ++ } ++} ++#endif ++ /* Routine to perform blink with range */ ++ if (unlikely(adev->led_power == 2)) ++ update_link_quality_led(adev); ++ ++/* handled: */ ++ /* write_flush(adev); - not needed, last op was read anyway */ ++ acx_unlock(adev, flags); ++ FN_EXIT0; ++ return IRQ_HANDLED; ++ ++none: ++ acx_unlock(adev, flags); ++ return IRQ_NONE; ++} ++ ++ ++/*********************************************************************** ++** acxpci_l_power_led ++*/ ++void ++acxpci_l_power_led(acx_device_t *adev, int enable) ++{ ++ u16 gpio_pled = IS_ACX111(adev) ? 0x0040 : 0x0800; ++ ++ /* A hack. Not moving message rate limiting to adev->xxx ++ * (it's only a debug message after all) */ ++ static int rate_limit = 0; ++ ++ if (rate_limit++ < 3) ++ log(L_IOCTL, "Please report in case toggling the power " ++ "LED doesn't work for your card!\n"); ++ if (enable) ++ write_reg16(adev, IO_ACX_GPIO_OUT, ++ read_reg16(adev, IO_ACX_GPIO_OUT) & ~gpio_pled); ++ else ++ write_reg16(adev, IO_ACX_GPIO_OUT, ++ read_reg16(adev, IO_ACX_GPIO_OUT) | gpio_pled); ++} ++ ++ ++/*********************************************************************** ++** Ioctls ++*/ ++ ++/*********************************************************************** ++*/ ++int ++acx111pci_ioctl_info( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ struct iw_param *vwrq, ++ char *extra) ++{ ++#if ACX_DEBUG > 1 ++ acx_device_t *adev = ndev2adev(ndev); ++ rxdesc_t *rxdesc; ++ txdesc_t *txdesc; ++ rxhostdesc_t *rxhostdesc; ++ txhostdesc_t *txhostdesc; ++ struct acx111_ie_memoryconfig memconf; ++ struct acx111_ie_queueconfig queueconf; ++ unsigned long flags; ++ int i; ++ char memmap[0x34]; ++ char rxconfig[0x8]; ++ char fcserror[0x8]; ++ char ratefallback[0x5]; ++ ++ if ( !(acx_debug & (L_IOCTL|L_DEBUG)) ) ++ return OK; ++ /* using printk() since we checked debug flag already */ ++ ++ acx_sem_lock(adev); ++ ++ if (!IS_ACX111(adev)) { ++ printk("acx111-specific function called " ++ "with non-acx111 chip, aborting\n"); ++ goto end_ok; ++ } ++ ++ /* get Acx111 Memory Configuration */ ++ memset(&memconf, 0, sizeof(memconf)); ++ /* BTW, fails with 12 (Write only) error code. ++ ** Retained for easy testing of issue_cmd error handling :) */ ++ acx_s_interrogate(adev, &memconf, ACX1xx_IE_QUEUE_CONFIG); ++ ++ /* get Acx111 Queue Configuration */ ++ memset(&queueconf, 0, sizeof(queueconf)); ++ acx_s_interrogate(adev, &queueconf, ACX1xx_IE_MEMORY_CONFIG_OPTIONS); ++ ++ /* get Acx111 Memory Map */ ++ memset(memmap, 0, sizeof(memmap)); ++ acx_s_interrogate(adev, &memmap, ACX1xx_IE_MEMORY_MAP); ++ ++ /* get Acx111 Rx Config */ ++ memset(rxconfig, 0, sizeof(rxconfig)); ++ acx_s_interrogate(adev, &rxconfig, ACX1xx_IE_RXCONFIG); ++ ++ /* get Acx111 fcs error count */ ++ memset(fcserror, 0, sizeof(fcserror)); ++ acx_s_interrogate(adev, &fcserror, ACX1xx_IE_FCS_ERROR_COUNT); ++ ++ /* get Acx111 rate fallback */ ++ memset(ratefallback, 0, sizeof(ratefallback)); ++ acx_s_interrogate(adev, &ratefallback, ACX1xx_IE_RATE_FALLBACK); ++ ++ /* force occurrence of a beacon interrupt */ ++ /* TODO: comment why is this necessary */ ++ write_reg16(adev, IO_ACX_HINT_TRIG, HOST_INT_BEACON); ++ ++ /* dump Acx111 Mem Configuration */ ++ printk("dump mem config:\n" ++ "data read: %d, struct size: %d\n" ++ "Number of stations: %1X\n" ++ "Memory block size: %1X\n" ++ "tx/rx memory block allocation: %1X\n" ++ "count rx: %X / tx: %X queues\n" ++ "options %1X\n" ++ "fragmentation %1X\n" ++ "Rx Queue 1 Count Descriptors: %X\n" ++ "Rx Queue 1 Host Memory Start: %X\n" ++ "Tx Queue 1 Count Descriptors: %X\n" ++ "Tx Queue 1 Attributes: %X\n", ++ memconf.len, (int) sizeof(memconf), ++ memconf.no_of_stations, ++ memconf.memory_block_size, ++ memconf.tx_rx_memory_block_allocation, ++ memconf.count_rx_queues, memconf.count_tx_queues, ++ memconf.options, ++ memconf.fragmentation, ++ memconf.rx_queue1_count_descs, ++ acx2cpu(memconf.rx_queue1_host_rx_start), ++ memconf.tx_queue1_count_descs, ++ memconf.tx_queue1_attributes); ++ ++ /* dump Acx111 Queue Configuration */ ++ printk("dump queue head:\n" ++ "data read: %d, struct size: %d\n" ++ "tx_memory_block_address (from card): %X\n" ++ "rx_memory_block_address (from card): %X\n" ++ "rx1_queue address (from card): %X\n" ++ "tx1_queue address (from card): %X\n" ++ "tx1_queue attributes (from card): %X\n", ++ queueconf.len, (int) sizeof(queueconf), ++ queueconf.tx_memory_block_address, ++ queueconf.rx_memory_block_address, ++ queueconf.rx1_queue_address, ++ queueconf.tx1_queue_address, ++ queueconf.tx1_attributes); ++ ++ /* dump Acx111 Mem Map */ ++ printk("dump mem map:\n" ++ "data read: %d, struct size: %d\n" ++ "Code start: %X\n" ++ "Code end: %X\n" ++ "WEP default key start: %X\n" ++ "WEP default key end: %X\n" ++ "STA table start: %X\n" ++ "STA table end: %X\n" ++ "Packet template start: %X\n" ++ "Packet template end: %X\n" ++ "Queue memory start: %X\n" ++ "Queue memory end: %X\n" ++ "Packet memory pool start: %X\n" ++ "Packet memory pool end: %X\n" ++ "iobase: %p\n" ++ "iobase2: %p\n", ++ *((u16 *)&memmap[0x02]), (int) sizeof(memmap), ++ *((u32 *)&memmap[0x04]), ++ *((u32 *)&memmap[0x08]), ++ *((u32 *)&memmap[0x0C]), ++ *((u32 *)&memmap[0x10]), ++ *((u32 *)&memmap[0x14]), ++ *((u32 *)&memmap[0x18]), ++ *((u32 *)&memmap[0x1C]), ++ *((u32 *)&memmap[0x20]), ++ *((u32 *)&memmap[0x24]), ++ *((u32 *)&memmap[0x28]), ++ *((u32 *)&memmap[0x2C]), ++ *((u32 *)&memmap[0x30]), ++ adev->iobase, ++ adev->iobase2); ++ ++ /* dump Acx111 Rx Config */ ++ printk("dump rx config:\n" ++ "data read: %d, struct size: %d\n" ++ "rx config: %X\n" ++ "rx filter config: %X\n", ++ *((u16 *)&rxconfig[0x02]), (int) sizeof(rxconfig), ++ *((u16 *)&rxconfig[0x04]), ++ *((u16 *)&rxconfig[0x06])); ++ ++ /* dump Acx111 fcs error */ ++ printk("dump fcserror:\n" ++ "data read: %d, struct size: %d\n" ++ "fcserrors: %X\n", ++ *((u16 *)&fcserror[0x02]), (int) sizeof(fcserror), ++ *((u32 *)&fcserror[0x04])); ++ ++ /* dump Acx111 rate fallback */ ++ printk("dump rate fallback:\n" ++ "data read: %d, struct size: %d\n" ++ "ratefallback: %X\n", ++ *((u16 *)&ratefallback[0x02]), (int) sizeof(ratefallback), ++ *((u8 *)&ratefallback[0x04])); ++ ++ /* protect against IRQ */ ++ acx_lock(adev, flags); ++ ++ /* dump acx111 internal rx descriptor ring buffer */ ++ rxdesc = adev->rxdesc_start; ++ ++ /* loop over complete receive pool */ ++ if (rxdesc) for (i = 0; i < RX_CNT; i++) { ++ printk("\ndump internal rxdesc %d:\n" ++ "mem pos %p\n" ++ "next 0x%X\n" ++ "acx mem pointer (dynamic) 0x%X\n" ++ "CTL (dynamic) 0x%X\n" ++ "Rate (dynamic) 0x%X\n" ++ "RxStatus (dynamic) 0x%X\n" ++ "Mod/Pre (dynamic) 0x%X\n", ++ i, ++ rxdesc, ++ acx2cpu(rxdesc->pNextDesc), ++ acx2cpu(rxdesc->ACXMemPtr), ++ rxdesc->Ctl_8, ++ rxdesc->rate, ++ rxdesc->error, ++ rxdesc->SNR); ++ rxdesc++; ++ } ++ ++ /* dump host rx descriptor ring buffer */ ++ ++ rxhostdesc = adev->rxhostdesc_start; ++ ++ /* loop over complete receive pool */ ++ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { ++ printk("\ndump host rxdesc %d:\n" ++ "mem pos %p\n" ++ "buffer mem pos 0x%X\n" ++ "buffer mem offset 0x%X\n" ++ "CTL 0x%X\n" ++ "Length 0x%X\n" ++ "next 0x%X\n" ++ "Status 0x%X\n", ++ i, ++ rxhostdesc, ++ acx2cpu(rxhostdesc->data_phy), ++ rxhostdesc->data_offset, ++ le16_to_cpu(rxhostdesc->Ctl_16), ++ le16_to_cpu(rxhostdesc->length), ++ acx2cpu(rxhostdesc->desc_phy_next), ++ rxhostdesc->Status); ++ rxhostdesc++; ++ } ++ ++ /* dump acx111 internal tx descriptor ring buffer */ ++ txdesc = adev->txdesc_start; ++ ++ /* loop over complete transmit pool */ ++ if (txdesc) for (i = 0; i < TX_CNT; i++) { ++ printk("\ndump internal txdesc %d:\n" ++ "size 0x%X\n" ++ "mem pos %p\n" ++ "next 0x%X\n" ++ "acx mem pointer (dynamic) 0x%X\n" ++ "host mem pointer (dynamic) 0x%X\n" ++ "length (dynamic) 0x%X\n" ++ "CTL (dynamic) 0x%X\n" ++ "CTL2 (dynamic) 0x%X\n" ++ "Status (dynamic) 0x%X\n" ++ "Rate (dynamic) 0x%X\n", ++ i, ++ (int) sizeof(struct txdesc), ++ txdesc, ++ acx2cpu(txdesc->pNextDesc), ++ acx2cpu(txdesc->AcxMemPtr), ++ acx2cpu(txdesc->HostMemPtr), ++ le16_to_cpu(txdesc->total_length), ++ txdesc->Ctl_8, ++ txdesc->Ctl2_8, txdesc->error, ++ txdesc->u.r1.rate); ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ ++ /* dump host tx descriptor ring buffer */ ++ ++ txhostdesc = adev->txhostdesc_start; ++ ++ /* loop over complete host send pool */ ++ if (txhostdesc) for (i = 0; i < TX_CNT * 2; i++) { ++ printk("\ndump host txdesc %d:\n" ++ "mem pos %p\n" ++ "buffer mem pos 0x%X\n" ++ "buffer mem offset 0x%X\n" ++ "CTL 0x%X\n" ++ "Length 0x%X\n" ++ "next 0x%X\n" ++ "Status 0x%X\n", ++ i, ++ txhostdesc, ++ acx2cpu(txhostdesc->data_phy), ++ txhostdesc->data_offset, ++ le16_to_cpu(txhostdesc->Ctl_16), ++ le16_to_cpu(txhostdesc->length), ++ acx2cpu(txhostdesc->desc_phy_next), ++ le32_to_cpu(txhostdesc->Status)); ++ txhostdesc++; ++ } ++ ++ /* write_reg16(adev, 0xb4, 0x4); */ ++ ++ acx_unlock(adev, flags); ++end_ok: ++ ++ acx_sem_unlock(adev); ++#endif /* ACX_DEBUG */ ++ return OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acx100pci_ioctl_set_phy_amp_bias( ++ struct net_device *ndev, ++ struct iw_request_info *info, ++ struct iw_param *vwrq, ++ char *extra) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ u16 gpio_old; ++ ++ if (!IS_ACX100(adev)) { ++ /* WARNING!!! ++ * Removing this check *might* damage ++ * hardware, since we're tweaking GPIOs here after all!!! ++ * You've been warned... ++ * WARNING!!! */ ++ printk("acx: sorry, setting bias level for non-acx100 " ++ "is not supported yet\n"); ++ return OK; ++ } ++ ++ if (*extra > 7) { ++ printk("acx: invalid bias parameter, range is 0-7\n"); ++ return -EINVAL; ++ } ++ ++ acx_sem_lock(adev); ++ ++ /* Need to lock accesses to [IO_ACX_GPIO_OUT]: ++ * IRQ handler uses it to update LED */ ++ acx_lock(adev, flags); ++ gpio_old = read_reg16(adev, IO_ACX_GPIO_OUT); ++ write_reg16(adev, IO_ACX_GPIO_OUT, (gpio_old & 0xf8ff) | ((u16)*extra << 8)); ++ acx_unlock(adev, flags); ++ ++ log(L_DEBUG, "gpio_old: 0x%04X\n", gpio_old); ++ printk("%s: PHY power amplifier bias: old:%d, new:%d\n", ++ ndev->name, ++ (gpio_old & 0x0700) >> 8, (unsigned char)*extra); ++ ++ acx_sem_unlock(adev); ++ ++ return OK; ++} ++ ++ ++/*************************************************************** ++** acxpci_l_alloc_tx ++** Actually returns a txdesc_t* ptr ++** ++** FIXME: in case of fragments, should allocate multiple descrs ++** after figuring out how many we need and whether we still have ++** sufficiently many. ++*/ ++tx_t* ++acxpci_l_alloc_tx(acx_device_t *adev) ++{ ++ struct txdesc *txdesc; ++ unsigned head; ++ u8 ctl8; ++ ++ FN_ENTER; ++ ++ if (unlikely(!adev->tx_free)) { ++ printk("acx: BUG: no free txdesc left\n"); ++ txdesc = NULL; ++ goto end; ++ } ++ ++ head = adev->tx_head; ++ txdesc = get_txdesc(adev, head); ++ ctl8 = txdesc->Ctl_8; ++ ++ /* 2005-10-11: there were several bug reports on this happening ++ ** but now cause seems to be understood & fixed */ ++ if (unlikely(DESC_CTL_HOSTOWN != (ctl8 & DESC_CTL_ACXDONE_HOSTOWN))) { ++ /* whoops, descr at current index is not free, so probably ++ * ring buffer already full */ ++ printk("acx: BUG: tx_head:%d Ctl8:0x%02X - failed to find " ++ "free txdesc\n", head, ctl8); ++ txdesc = NULL; ++ goto end; ++ } ++ ++ /* Needed in case txdesc won't be eventually submitted for tx */ ++ txdesc->Ctl_8 = DESC_CTL_ACXDONE_HOSTOWN; ++ ++ adev->tx_free--; ++ log(L_BUFT, "tx: got desc %u, %u remain\n", ++ head, adev->tx_free); ++ /* Keep a few free descs between head and tail of tx ring. ++ ** It is not absolutely needed, just feels safer */ ++ if (adev->tx_free < TX_STOP_QUEUE) { ++ log(L_BUF, "stop queue (%u tx desc left)\n", ++ adev->tx_free); ++ acx_stop_queue(adev->ndev, NULL); ++ } ++ ++ /* returning current descriptor, so advance to next free one */ ++ adev->tx_head = (head + 1) % TX_CNT; ++end: ++ FN_EXIT0; ++ ++ return (tx_t*)txdesc; ++} ++ ++ ++/*********************************************************************** ++*/ ++void* ++acxpci_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) ++{ ++ return get_txhostdesc(adev, (txdesc_t*)tx_opaque)->data; ++} ++ ++ ++/*********************************************************************** ++** acxpci_l_tx_data ++** ++** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). ++** Can be called from acx_i_start_xmit (data frames from net core). ++** ++** FIXME: in case of fragments, should loop over the number of ++** pre-allocated tx descrs, properly setting up transfer data and ++** CTL_xxx flags according to fragment number. ++*/ ++void ++acxpci_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int len) ++{ ++ txdesc_t *txdesc = (txdesc_t*)tx_opaque; ++ txhostdesc_t *hostdesc1, *hostdesc2; ++ client_t *clt; ++ u16 rate_cur; ++ u8 Ctl_8, Ctl2_8; ++ ++ FN_ENTER; ++ ++ /* fw doesn't tx such packets anyhow */ ++ if (unlikely(len < WLAN_HDR_A3_LEN)) ++ goto end; ++ ++ hostdesc1 = get_txhostdesc(adev, txdesc); ++ /* modify flag status in separate variable to be able to write it back ++ * in one big swoop later (also in order to have less device memory ++ * accesses) */ ++ Ctl_8 = txdesc->Ctl_8; ++ Ctl2_8 = 0; /* really need to init it to 0, not txdesc->Ctl2_8, it seems */ ++ ++ hostdesc2 = hostdesc1 + 1; ++ ++ /* DON'T simply set Ctl field to 0 here globally, ++ * it needs to maintain a consistent flag status (those are state flags!!), ++ * otherwise it may lead to severe disruption. Only set or reset particular ++ * flags at the exact moment this is needed... */ ++ ++ /* let chip do RTS/CTS handshaking before sending ++ * in case packet size exceeds threshold */ ++ if (len > adev->rts_threshold) ++ SET_BIT(Ctl2_8, DESC_CTL2_RTS); ++ else ++ CLEAR_BIT(Ctl2_8, DESC_CTL2_RTS); ++ ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_3_AP: ++ clt = acx_l_sta_list_get(adev, ((wlan_hdr_t*)hostdesc1->data)->a1); ++ break; ++ case ACX_MODE_2_STA: ++ clt = adev->ap_client; ++ break; ++#if 0 ++/* testing was done on acx111: */ ++ case ACX_MODE_MONITOR: ++ SET_BIT(Ctl2_8, 0 ++/* sends CTS to self before packet */ ++ + DESC_CTL2_SEQ /* don't increase sequence field */ ++/* not working (looks like good fcs is still added) */ ++ + DESC_CTL2_FCS /* don't add the FCS */ ++/* not tested */ ++ + DESC_CTL2_MORE_FRAG ++/* not tested */ ++ + DESC_CTL2_RETRY /* don't increase retry field */ ++/* not tested */ ++ + DESC_CTL2_POWER /* don't increase power mgmt. field */ ++/* no effect */ ++ + DESC_CTL2_WEP /* encrypt this frame */ ++/* not tested */ ++ + DESC_CTL2_DUR /* don't increase duration field */ ++ ); ++ /* fallthrough */ ++#endif ++ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ ++ clt = NULL; ++ break; ++ } ++ ++ rate_cur = clt ? clt->rate_cur : adev->rate_bcast; ++ if (unlikely(!rate_cur)) { ++ printk("acx: driver bug! bad ratemask\n"); ++ goto end; ++ } ++ ++ /* used in tx cleanup routine for auto rate and accounting: */ ++ put_txcr(adev, txdesc, clt, rate_cur); ++ ++ txdesc->total_length = cpu_to_le16(len); ++ hostdesc2->length = cpu_to_le16(len - WLAN_HDR_A3_LEN); ++ if (IS_ACX111(adev)) { ++ /* note that if !txdesc->do_auto, txrate->cur ++ ** has only one nonzero bit */ ++ txdesc->u.r2.rate111 = cpu_to_le16( ++ rate_cur ++ /* WARNING: I was never able to make it work with prism54 AP. ++ ** It was falling down to 1Mbit where shortpre is not applicable, ++ ** and not working at all at "5,11 basic rates only" setting. ++ ** I even didn't see tx packets in radio packet capture. ++ ** Disabled for now --vda */ ++ /*| ((clt->shortpre && clt->cur!=RATE111_1) ? RATE111_SHORTPRE : 0) */ ++ ); ++#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS ++ /* should add this to rate111 above as necessary */ ++ | (clt->pbcc511 ? RATE111_PBCC511 : 0) ++#endif ++ hostdesc1->length = cpu_to_le16(len); ++ } else { /* ACX100 */ ++ u8 rate_100 = clt ? clt->rate_100 : adev->rate_bcast100; ++ txdesc->u.r1.rate = rate_100; ++#ifdef TODO_FIGURE_OUT_WHEN_TO_SET_THIS ++ if (clt->pbcc511) { ++ if (n == RATE100_5 || n == RATE100_11) ++ n |= RATE100_PBCC511; ++ } ++ ++ if (clt->shortpre && (clt->cur != RATE111_1)) ++ SET_BIT(Ctl_8, DESC_CTL_SHORT_PREAMBLE); /* set Short Preamble */ ++#endif ++ /* set autodma and reclaim and 1st mpdu */ ++ SET_BIT(Ctl_8, DESC_CTL_AUTODMA | DESC_CTL_RECLAIM | DESC_CTL_FIRSTFRAG); ++#if ACX_FRAGMENTATION ++ /* SET_BIT(Ctl2_8, DESC_CTL2_MORE_FRAG); cannot set it unconditionally, needs to be set for all non-last fragments */ ++#endif ++ hostdesc1->length = cpu_to_le16(WLAN_HDR_A3_LEN); ++ } ++ /* don't need to clean ack/rts statistics here, already ++ * done on descr cleanup */ ++ ++ /* clears HOSTOWN and ACXDONE bits, thus telling that the descriptors ++ * are now owned by the acx100; do this as LAST operation */ ++ CLEAR_BIT(Ctl_8, DESC_CTL_ACXDONE_HOSTOWN); ++ /* flush writes before we release hostdesc to the adapter here */ ++ wmb(); ++ CLEAR_BIT(hostdesc1->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); ++ CLEAR_BIT(hostdesc2->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); ++ ++ /* write back modified flags */ ++ txdesc->Ctl2_8 = Ctl2_8; ++ txdesc->Ctl_8 = Ctl_8; ++ /* unused: txdesc->tx_time = cpu_to_le32(jiffies); */ ++ ++ /* flush writes before we tell the adapter that it's its turn now */ ++ mmiowb(); ++ write_reg16(adev, IO_ACX_INT_TRIG, INT_TRIG_TXPRC); ++ write_flush(adev); ++ ++ /* log the packet content AFTER sending it, ++ * in order to not delay sending any further than absolutely needed ++ * Do separate logs for acx100/111 to have human-readable rates */ ++ if (unlikely(acx_debug & (L_XFER|L_DATA))) { ++ u16 fc = ((wlan_hdr_t*)hostdesc1->data)->fc; ++ if (IS_ACX111(adev)) ++ printk("tx: pkt (%s): len %d " ++ "rate %04X%s status %u\n", ++ acx_get_packet_type_string(le16_to_cpu(fc)), len, ++ le16_to_cpu(txdesc->u.r2.rate111), ++ (le16_to_cpu(txdesc->u.r2.rate111) & RATE111_SHORTPRE) ? "(SPr)" : "", ++ adev->status); ++ else ++ printk("tx: pkt (%s): len %d rate %03u%s status %u\n", ++ acx_get_packet_type_string(fc), len, ++ txdesc->u.r1.rate, ++ (Ctl_8 & DESC_CTL_SHORT_PREAMBLE) ? "(SPr)" : "", ++ adev->status); ++ ++ if (acx_debug & L_DATA) { ++ printk("tx: 802.11 [%d]: ", len); ++ acx_dump_bytes(hostdesc1->data, len); ++ } ++ } ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxpci_l_clean_txdesc ++** ++** This function resets the txdescs' status when the ACX100 ++** signals the TX done IRQ (txdescs have been processed), starting with ++** the pool index of the descriptor which we would use next, ++** in order to make sure that we can be as fast as possible ++** in filling new txdescs. ++** Everytime we get called we know where the next packet to be cleaned is. ++*/ ++ ++#if !ACX_DEBUG ++static inline void log_txbuffer(const acx_device_t *adev) {} ++#else ++static void ++log_txbuffer(acx_device_t *adev) ++{ ++ txdesc_t *txdesc; ++ int i; ++ ++ /* no FN_ENTER here, we don't want that */ ++ /* no locks here, since it's entirely non-critical code */ ++ txdesc = adev->txdesc_start; ++ if (unlikely(!txdesc)) return; ++ printk("tx: desc->Ctl8's:"); ++ for (i = 0; i < TX_CNT; i++) { ++ printk(" %02X", txdesc->Ctl_8); ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ printk("\n"); ++} ++#endif ++ ++ ++static void ++handle_tx_error(acx_device_t *adev, u8 error, unsigned int finger) ++{ ++ const char *err = "unknown error"; ++ ++ /* hmm, should we handle this as a mask ++ * of *several* bits? ++ * For now I think only caring about ++ * individual bits is ok... */ ++ switch (error) { ++ case 0x01: ++ err = "no Tx due to error in other fragment"; ++ adev->wstats.discard.fragment++; ++ break; ++ case 0x02: ++ err = "Tx aborted"; ++ adev->stats.tx_aborted_errors++; ++ break; ++ case 0x04: ++ err = "Tx desc wrong parameters"; ++ adev->wstats.discard.misc++; ++ break; ++ case 0x08: ++ err = "WEP key not found"; ++ adev->wstats.discard.misc++; ++ break; ++ case 0x10: ++ err = "MSDU lifetime timeout? - try changing " ++ "'iwconfig retry lifetime XXX'"; ++ adev->wstats.discard.misc++; ++ break; ++ case 0x20: ++ err = "excessive Tx retries due to either distance " ++ "too high or unable to Tx or Tx frame error - " ++ "try changing 'iwconfig txpower XXX' or " ++ "'sens'itivity or 'retry'"; ++ adev->wstats.discard.retries++; ++ /* Tx error 0x20 also seems to occur on ++ * overheating, so I'm not sure whether we ++ * actually want to do aggressive radio recalibration, ++ * since people maybe won't notice then that their hardware ++ * is slowly getting cooked... ++ * Or is it still a safe long distance from utter ++ * radio non-functionality despite many radio recalibs ++ * to final destructive overheating of the hardware? ++ * In this case we really should do recalib here... ++ * I guess the only way to find out is to do a ++ * potentially fatal self-experiment :-\ ++ * Or maybe only recalib in case we're using Tx ++ * rate auto (on errors switching to lower speed ++ * --> less heat?) or 802.11 power save mode? ++ * ++ * ok, just do it. */ ++ if (++adev->retry_errors_msg_ratelimit % 4 == 0) { ++ if (adev->retry_errors_msg_ratelimit <= 20) { ++ printk("%s: several excessive Tx " ++ "retry errors occurred, attempting " ++ "to recalibrate radio. Radio " ++ "drift might be caused by increasing " ++ "card temperature, please check the card " ++ "before it's too late!\n", ++ adev->ndev->name); ++ if (adev->retry_errors_msg_ratelimit == 20) ++ printk("disabling above message\n"); ++ } ++ ++ acx_schedule_task(adev, ACX_AFTER_IRQ_CMD_RADIO_RECALIB); ++ } ++ break; ++ case 0x40: ++ err = "Tx buffer overflow"; ++ adev->stats.tx_fifo_errors++; ++ break; ++ case 0x80: ++ /* possibly ACPI C-state powersaving related!!! ++ * (DMA timeout due to excessively high wakeup ++ * latency after C-state activation!?) ++ * Disable C-State powersaving and try again, ++ * then PLEASE REPORT, I'm VERY interested in ++ * whether my theory is correct that this is ++ * actually the problem here. ++ * In that case, use new Linux idle wakeup latency ++ * requirements kernel API to prevent this issue. */ ++ err = "DMA error"; ++ adev->wstats.discard.misc++; ++ break; ++ } ++ adev->stats.tx_errors++; ++ if (adev->stats.tx_errors <= 20) ++ printk("%s: tx error 0x%02X, buf %02u! (%s)\n", ++ adev->ndev->name, error, finger, err); ++ else ++ printk("%s: tx error 0x%02X, buf %02u!\n", ++ adev->ndev->name, error, finger); ++} ++ ++ ++unsigned int ++acxpci_l_clean_txdesc(acx_device_t *adev) ++{ ++ txdesc_t *txdesc; ++ unsigned finger; ++ int num_cleaned; ++ u16 r111; ++ u8 error, ack_failures, rts_failures, rts_ok, r100; ++ ++ FN_ENTER; ++ ++ if (unlikely(acx_debug & L_DEBUG)) ++ log_txbuffer(adev); ++ ++ log(L_BUFT, "tx: cleaning up bufs from %u\n", adev->tx_tail); ++ ++ /* We know first descr which is not free yet. We advance it as far ++ ** as we see correct bits set in following descs (if next desc ++ ** is NOT free, we shouldn't advance at all). We know that in ++ ** front of tx_tail may be "holes" with isolated free descs. ++ ** We will catch up when all intermediate descs will be freed also */ ++ ++ finger = adev->tx_tail; ++ num_cleaned = 0; ++ while (likely(finger != adev->tx_head)) { ++ txdesc = get_txdesc(adev, finger); ++ ++ /* If we allocated txdesc on tx path but then decided ++ ** to NOT use it, then it will be left as a free "bubble" ++ ** in the "allocated for tx" part of the ring. ++ ** We may meet it on the next ring pass here. */ ++ ++ /* stop if not marked as "tx finished" and "host owned" */ ++ if ((txdesc->Ctl_8 & DESC_CTL_ACXDONE_HOSTOWN) ++ != DESC_CTL_ACXDONE_HOSTOWN) { ++ if (unlikely(!num_cleaned)) { /* maybe remove completely */ ++ log(L_BUFT, "clean_txdesc: tail isn't free. " ++ "tail:%d head:%d\n", ++ adev->tx_tail, adev->tx_head); ++ } ++ break; ++ } ++ ++ /* remember desc values... */ ++ error = txdesc->error; ++ ack_failures = txdesc->ack_failures; ++ rts_failures = txdesc->rts_failures; ++ rts_ok = txdesc->rts_ok; ++ r100 = txdesc->u.r1.rate; ++ r111 = le16_to_cpu(txdesc->u.r2.rate111); ++ ++ /* need to check for certain error conditions before we ++ * clean the descriptor: we still need valid descr data here */ ++ if (unlikely(0x30 & error)) { ++ /* only send IWEVTXDROP in case of retry or lifetime exceeded; ++ * all other errors mean we screwed up locally */ ++ union iwreq_data wrqu; ++ wlan_hdr_t *hdr; ++ txhostdesc_t *hostdesc; ++ ++ hostdesc = get_txhostdesc(adev, txdesc); ++ hdr = (wlan_hdr_t *)hostdesc->data; ++ MAC_COPY(wrqu.addr.sa_data, hdr->a1); ++ wireless_send_event(adev->ndev, IWEVTXDROP, &wrqu, NULL); ++ } ++ ++ /* ...and free the desc */ ++ txdesc->error = 0; ++ txdesc->ack_failures = 0; ++ txdesc->rts_failures = 0; ++ txdesc->rts_ok = 0; ++ /* signal host owning it LAST, since ACX already knows that this ++ ** descriptor is finished since it set Ctl_8 accordingly. */ ++ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; ++ ++ adev->tx_free++; ++ num_cleaned++; ++ ++ if ((adev->tx_free >= TX_START_QUEUE) ++ && (adev->status == ACX_STATUS_4_ASSOCIATED) ++ && (acx_queue_stopped(adev->ndev)) ++ ) { ++ log(L_BUF, "tx: wake queue (avail. Tx desc %u)\n", ++ adev->tx_free); ++ acx_wake_queue(adev->ndev, NULL); ++ } ++ ++ /* do error checking, rate handling and logging ++ * AFTER having done the work, it's faster */ ++ ++ /* do rate handling */ ++ if (adev->rate_auto) { ++ struct client *clt = get_txc(adev, txdesc); ++ if (clt) { ++ u16 cur = get_txr(adev, txdesc); ++ if (clt->rate_cur == cur) { ++ acx_l_handle_txrate_auto(adev, clt, ++ cur, /* intended rate */ ++ r100, r111, /* actually used rate */ ++ (error & 0x30), /* was there an error? */ ++ TX_CNT + TX_CLEAN_BACKLOG - adev->tx_free); ++ } ++ } ++ } ++ ++ if (unlikely(error)) ++ handle_tx_error(adev, error, finger); ++ ++ if (IS_ACX111(adev)) ++ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u r111=%04X\n", ++ finger, ack_failures, rts_failures, rts_ok, r111); ++ else ++ log(L_BUFT, "tx: cleaned %u: !ACK=%u !RTS=%u RTS=%u rate=%u\n", ++ finger, ack_failures, rts_failures, rts_ok, r100); ++ ++ /* update pointer for descr to be cleaned next */ ++ finger = (finger + 1) % TX_CNT; ++ } ++ ++ /* remember last position */ ++ adev->tx_tail = finger; ++/* end: */ ++ FN_EXIT1(num_cleaned); ++ return num_cleaned; ++} ++ ++/* clean *all* Tx descriptors, and regardless of their previous state. ++ * Used for brute-force reset handling. */ ++void ++acxpci_l_clean_txdesc_emergency(acx_device_t *adev) ++{ ++ txdesc_t *txdesc; ++ int i; ++ ++ FN_ENTER; ++ ++ for (i = 0; i < TX_CNT; i++) { ++ txdesc = get_txdesc(adev, i); ++ ++ /* free it */ ++ txdesc->ack_failures = 0; ++ txdesc->rts_failures = 0; ++ txdesc->rts_ok = 0; ++ txdesc->error = 0; ++ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; ++ } ++ ++ adev->tx_free = TX_CNT; ++ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxpci_s_create_tx_host_desc_queue ++*/ ++ ++static void* ++allocate(acx_device_t *adev, size_t size, dma_addr_t *phy, const char *msg) ++{ ++ void *ptr; ++ ++ ptr = dma_alloc_coherent(adev->pdev ? &adev->pdev->dev : NULL, ++ size, phy, GFP_KERNEL); ++ ++ if (ptr) { ++ log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n", ++ msg, (int)size, ptr, (unsigned long long)*phy); ++ memset(ptr, 0, size); ++ return ptr; ++ } ++ printk(KERN_ERR "acx: %s allocation FAILED (%d bytes)\n", ++ msg, (int)size); ++ return NULL; ++} ++ ++ ++static int ++acxpci_s_create_tx_host_desc_queue(acx_device_t *adev) ++{ ++ txhostdesc_t *hostdesc; ++ u8 *txbuf; ++ dma_addr_t hostdesc_phy; ++ dma_addr_t txbuf_phy; ++ int i; ++ ++ FN_ENTER; ++ ++ /* allocate TX buffer */ ++ adev->txbuf_area_size = TX_CNT * WLAN_A4FR_MAXLEN_WEP_FCS; ++ adev->txbuf_start = allocate(adev, adev->txbuf_area_size, ++ &adev->txbuf_startphy, "txbuf_start"); ++ if (!adev->txbuf_start) ++ goto fail; ++ ++ /* allocate the TX host descriptor queue pool */ ++ adev->txhostdesc_area_size = TX_CNT * 2*sizeof(*hostdesc); ++ adev->txhostdesc_start = allocate(adev, adev->txhostdesc_area_size, ++ &adev->txhostdesc_startphy, "txhostdesc_start"); ++ if (!adev->txhostdesc_start) ++ goto fail; ++ /* check for proper alignment of TX host descriptor pool */ ++ if ((long) adev->txhostdesc_start & 3) { ++ printk("acx: driver bug: dma alloc returns unaligned address\n"); ++ goto fail; ++ } ++ ++ hostdesc = adev->txhostdesc_start; ++ hostdesc_phy = adev->txhostdesc_startphy; ++ txbuf = adev->txbuf_start; ++ txbuf_phy = adev->txbuf_startphy; ++ ++#if 0 ++/* Each tx buffer is accessed by hardware via ++** txdesc -> txhostdesc(s) -> txbuffer(s). ++** We use only one txhostdesc per txdesc, but it looks like ++** acx111 is buggy: it accesses second txhostdesc ++** (via hostdesc.desc_phy_next field) even if ++** txdesc->length == hostdesc->length and thus ++** entire packet was placed into first txhostdesc. ++** Due to this bug acx111 hangs unless second txhostdesc ++** has le16_to_cpu(hostdesc.length) = 3 (or larger) ++** Storing NULL into hostdesc.desc_phy_next ++** doesn't seem to help. ++** ++** Update: although it worked on Xterasys XN-2522g ++** with len=3 trick, WG311v2 is even more bogus, doesn't work. ++** Keeping this code (#ifdef'ed out) for documentational purposes. ++*/ ++ for (i = 0; i < TX_CNT*2; i++) { ++ hostdesc_phy += sizeof(*hostdesc); ++ if (!(i & 1)) { ++ hostdesc->data_phy = cpu2acx(txbuf_phy); ++ /* hostdesc->data_offset = ... */ ++ /* hostdesc->reserved = ... */ ++ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); ++ /* hostdesc->length = ... */ ++ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); ++ hostdesc->pNext = ptr2acx(NULL); ++ /* hostdesc->Status = ... */ ++ /* below: non-hardware fields */ ++ hostdesc->data = txbuf; ++ ++ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS; ++ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS; ++ } else { ++ /* hostdesc->data_phy = ... */ ++ /* hostdesc->data_offset = ... */ ++ /* hostdesc->reserved = ... */ ++ /* hostdesc->Ctl_16 = ... */ ++ hostdesc->length = cpu_to_le16(3); /* bug workaround */ ++ /* hostdesc->desc_phy_next = ... */ ++ /* hostdesc->pNext = ... */ ++ /* hostdesc->Status = ... */ ++ /* below: non-hardware fields */ ++ /* hostdesc->data = ... */ ++ } ++ hostdesc++; ++ } ++#endif ++/* We initialize two hostdescs so that they point to adjacent ++** memory areas. Thus txbuf is really just a contiguous memory area */ ++ for (i = 0; i < TX_CNT*2; i++) { ++ hostdesc_phy += sizeof(*hostdesc); ++ ++ hostdesc->data_phy = cpu2acx(txbuf_phy); ++ /* done by memset(0): hostdesc->data_offset = 0; */ ++ /* hostdesc->reserved = ... */ ++ hostdesc->Ctl_16 = cpu_to_le16(DESC_CTL_HOSTOWN); ++ /* hostdesc->length = ... */ ++ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); ++ /* done by memset(0): hostdesc->pNext = ptr2acx(NULL); */ ++ /* hostdesc->Status = ... */ ++ /* ->data is a non-hardware field: */ ++ hostdesc->data = txbuf; ++ ++ if (!(i & 1)) { ++ txbuf += WLAN_HDR_A3_LEN; ++ txbuf_phy += WLAN_HDR_A3_LEN; ++ } else { ++ txbuf += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; ++ txbuf_phy += WLAN_A4FR_MAXLEN_WEP_FCS - WLAN_HDR_A3_LEN; ++ } ++ hostdesc++; ++ } ++ hostdesc--; ++ hostdesc->desc_phy_next = cpu2acx(adev->txhostdesc_startphy); ++ ++ FN_EXIT1(OK); ++ return OK; ++fail: ++ printk("acx: create_tx_host_desc_queue FAILED\n"); ++ /* dealloc will be done by free function on error case */ ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*************************************************************** ++** acxpci_s_create_rx_host_desc_queue ++*/ ++/* the whole size of a data buffer (header plus data body) ++ * plus 32 bytes safety offset at the end */ ++#define RX_BUFFER_SIZE (sizeof(rxbuffer_t) + 32) ++ ++static int ++acxpci_s_create_rx_host_desc_queue(acx_device_t *adev) ++{ ++ rxhostdesc_t *hostdesc; ++ rxbuffer_t *rxbuf; ++ dma_addr_t hostdesc_phy; ++ dma_addr_t rxbuf_phy; ++ int i; ++ ++ FN_ENTER; ++ ++ /* allocate the RX host descriptor queue pool */ ++ adev->rxhostdesc_area_size = RX_CNT * sizeof(*hostdesc); ++ adev->rxhostdesc_start = allocate(adev, adev->rxhostdesc_area_size, ++ &adev->rxhostdesc_startphy, "rxhostdesc_start"); ++ if (!adev->rxhostdesc_start) ++ goto fail; ++ /* check for proper alignment of RX host descriptor pool */ ++ if ((long) adev->rxhostdesc_start & 3) { ++ printk("acx: driver bug: dma alloc returns unaligned address\n"); ++ goto fail; ++ } ++ ++ /* allocate Rx buffer pool which will be used by the acx ++ * to store the whole content of the received frames in it */ ++ adev->rxbuf_area_size = RX_CNT * RX_BUFFER_SIZE; ++ adev->rxbuf_start = allocate(adev, adev->rxbuf_area_size, ++ &adev->rxbuf_startphy, "rxbuf_start"); ++ if (!adev->rxbuf_start) ++ goto fail; ++ ++ rxbuf = adev->rxbuf_start; ++ rxbuf_phy = adev->rxbuf_startphy; ++ hostdesc = adev->rxhostdesc_start; ++ hostdesc_phy = adev->rxhostdesc_startphy; ++ ++ /* don't make any popular C programming pointer arithmetic mistakes ++ * here, otherwise I'll kill you... ++ * (and don't dare asking me why I'm warning you about that...) */ ++ for (i = 0; i < RX_CNT; i++) { ++ hostdesc->data = rxbuf; ++ hostdesc->data_phy = cpu2acx(rxbuf_phy); ++ hostdesc->length = cpu_to_le16(RX_BUFFER_SIZE); ++ CLEAR_BIT(hostdesc->Ctl_16, cpu_to_le16(DESC_CTL_HOSTOWN)); ++ rxbuf++; ++ rxbuf_phy += sizeof(*rxbuf); ++ hostdesc_phy += sizeof(*hostdesc); ++ hostdesc->desc_phy_next = cpu2acx(hostdesc_phy); ++ hostdesc++; ++ } ++ hostdesc--; ++ hostdesc->desc_phy_next = cpu2acx(adev->rxhostdesc_startphy); ++ FN_EXIT1(OK); ++ return OK; ++fail: ++ printk("acx: create_rx_host_desc_queue FAILED\n"); ++ /* dealloc will be done by free function on error case */ ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*************************************************************** ++** acxpci_s_create_hostdesc_queues ++*/ ++int ++acxpci_s_create_hostdesc_queues(acx_device_t *adev) ++{ ++ int result; ++ result = acxpci_s_create_tx_host_desc_queue(adev); ++ if (OK != result) return result; ++ result = acxpci_s_create_rx_host_desc_queue(adev); ++ return result; ++} ++ ++ ++/*************************************************************** ++** acxpci_create_tx_desc_queue ++*/ ++static void ++acxpci_create_tx_desc_queue(acx_device_t *adev, u32 tx_queue_start) ++{ ++ txdesc_t *txdesc; ++ txhostdesc_t *hostdesc; ++ dma_addr_t hostmemptr; ++ u32 mem_offs; ++ int i; ++ ++ FN_ENTER; ++ ++ if (IS_ACX100(adev)) ++ adev->txdesc_size = sizeof(*txdesc); ++ else ++ /* the acx111 txdesc is 4 bytes larger */ ++ adev->txdesc_size = sizeof(*txdesc) + 4; ++ ++ adev->txdesc_start = (txdesc_t *) (adev->iobase2 + tx_queue_start); ++ ++ log(L_DEBUG, "adev->iobase2=%p\n" ++ "tx_queue_start=%08X\n" ++ "adev->txdesc_start=%p\n", ++ adev->iobase2, ++ tx_queue_start, ++ adev->txdesc_start); ++ ++ adev->tx_free = TX_CNT; ++ /* done by memset: adev->tx_head = 0; */ ++ /* done by memset: adev->tx_tail = 0; */ ++ txdesc = adev->txdesc_start; ++ mem_offs = tx_queue_start; ++ hostmemptr = adev->txhostdesc_startphy; ++ hostdesc = adev->txhostdesc_start; ++ ++ if (IS_ACX111(adev)) { ++ /* ACX111 has a preinitialized Tx buffer! */ ++ /* loop over whole send pool */ ++ /* FIXME: do we have to do the hostmemptr stuff here?? */ ++ for (i = 0; i < TX_CNT; i++) { ++ txdesc->HostMemPtr = ptr2acx(hostmemptr); ++ txdesc->Ctl_8 = DESC_CTL_HOSTOWN; ++ /* reserve two (hdr desc and payload desc) */ ++ hostdesc += 2; ++ hostmemptr += 2 * sizeof(*hostdesc); ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ } else { ++ /* ACX100 Tx buffer needs to be initialized by us */ ++ /* clear whole send pool. sizeof is safe here (we are acx100) */ ++ memset(adev->txdesc_start, 0, TX_CNT * sizeof(*txdesc)); ++ ++ /* loop over whole send pool */ ++ for (i = 0; i < TX_CNT; i++) { ++ log(L_DEBUG, "configure card tx descriptor: 0x%p, " ++ "size: 0x%X\n", txdesc, adev->txdesc_size); ++ ++ /* pointer to hostdesc memory */ ++ txdesc->HostMemPtr = ptr2acx(hostmemptr); ++ /* initialise ctl */ ++ txdesc->Ctl_8 = ( DESC_CTL_HOSTOWN | DESC_CTL_RECLAIM ++ | DESC_CTL_AUTODMA | DESC_CTL_FIRSTFRAG); ++ /* done by memset(0): txdesc->Ctl2_8 = 0; */ ++ /* point to next txdesc */ ++ txdesc->pNextDesc = cpu2acx(mem_offs + adev->txdesc_size); ++ /* reserve two (hdr desc and payload desc) */ ++ hostdesc += 2; ++ hostmemptr += 2 * sizeof(*hostdesc); ++ /* go to the next one */ ++ mem_offs += adev->txdesc_size; ++ /* ++ is safe here (we are acx100) */ ++ txdesc++; ++ } ++ /* go back to the last one */ ++ txdesc--; ++ /* and point to the first making it a ring buffer */ ++ txdesc->pNextDesc = cpu2acx(tx_queue_start); ++ } ++ FN_EXIT0; ++} ++ ++ ++/*************************************************************** ++** acxpci_create_rx_desc_queue ++*/ ++static void ++acxpci_create_rx_desc_queue(acx_device_t *adev, u32 rx_queue_start) ++{ ++ rxdesc_t *rxdesc; ++ u32 mem_offs; ++ int i; ++ ++ FN_ENTER; ++ ++ /* done by memset: adev->rx_tail = 0; */ ++ ++ /* ACX111 doesn't need any further config: preconfigures itself. ++ * Simply print ring buffer for debugging */ ++ if (IS_ACX111(adev)) { ++ /* rxdesc_start already set here */ ++ ++ adev->rxdesc_start = (rxdesc_t *) ((u8 *)adev->iobase2 + rx_queue_start); ++ ++ rxdesc = adev->rxdesc_start; ++ for (i = 0; i < RX_CNT; i++) { ++ log(L_DEBUG, "rx descriptor %d @ 0x%p\n", i, rxdesc); ++ rxdesc = adev->rxdesc_start = (rxdesc_t *) ++ (adev->iobase2 + acx2cpu(rxdesc->pNextDesc)); ++ } ++ } else { ++ /* we didn't pre-calculate rxdesc_start in case of ACX100 */ ++ /* rxdesc_start should be right AFTER Tx pool */ ++ adev->rxdesc_start = (rxdesc_t *) ++ ((u8 *) adev->txdesc_start + (TX_CNT * sizeof(txdesc_t))); ++ /* NB: sizeof(txdesc_t) above is valid because we know ++ ** we are in if (acx100) block. Beware of cut-n-pasting elsewhere! ++ ** acx111's txdesc is larger! */ ++ ++ memset(adev->rxdesc_start, 0, RX_CNT * sizeof(*rxdesc)); ++ ++ /* loop over whole receive pool */ ++ rxdesc = adev->rxdesc_start; ++ mem_offs = rx_queue_start; ++ for (i = 0; i < RX_CNT; i++) { ++ log(L_DEBUG, "rx descriptor @ 0x%p\n", rxdesc); ++ rxdesc->Ctl_8 = DESC_CTL_RECLAIM | DESC_CTL_AUTODMA; ++ /* point to next rxdesc */ ++ rxdesc->pNextDesc = cpu2acx(mem_offs + sizeof(*rxdesc)); ++ /* go to the next one */ ++ mem_offs += sizeof(*rxdesc); ++ rxdesc++; ++ } ++ /* go to the last one */ ++ rxdesc--; ++ ++ /* and point to the first making it a ring buffer */ ++ rxdesc->pNextDesc = cpu2acx(rx_queue_start); ++ } ++ FN_EXIT0; ++} ++ ++ ++/*************************************************************** ++** acxpci_create_desc_queues ++*/ ++void ++acxpci_create_desc_queues(acx_device_t *adev, u32 tx_queue_start, u32 rx_queue_start) ++{ ++ acxpci_create_tx_desc_queue(adev, tx_queue_start); ++ acxpci_create_rx_desc_queue(adev, rx_queue_start); ++} ++ ++ ++/*************************************************************** ++** acxpci_s_proc_diag_output ++*/ ++char* ++acxpci_s_proc_diag_output(char *p, acx_device_t *adev) ++{ ++ const char *rtl, *thd, *ttl; ++ rxhostdesc_t *rxhostdesc; ++ txdesc_t *txdesc; ++ int i; ++ ++ FN_ENTER; ++ ++ p += sprintf(p, "** Rx buf **\n"); ++ rxhostdesc = adev->rxhostdesc_start; ++ if (rxhostdesc) for (i = 0; i < RX_CNT; i++) { ++ rtl = (i == adev->rx_tail) ? " [tail]" : ""; ++ if ((rxhostdesc->Ctl_16 & cpu_to_le16(DESC_CTL_HOSTOWN)) ++ && (rxhostdesc->Status & cpu_to_le32(DESC_STATUS_FULL)) ) ++ p += sprintf(p, "%02u FULL%s\n", i, rtl); ++ else ++ p += sprintf(p, "%02u empty%s\n", i, rtl); ++ rxhostdesc++; ++ } ++ p += sprintf(p, "** Tx buf (free %d, Linux netqueue %s) **\n", adev->tx_free, ++ acx_queue_stopped(adev->ndev) ? "STOPPED" : "running"); ++ txdesc = adev->txdesc_start; ++ if (txdesc) for (i = 0; i < TX_CNT; i++) { ++ thd = (i == adev->tx_head) ? " [head]" : ""; ++ ttl = (i == adev->tx_tail) ? " [tail]" : ""; ++ if (txdesc->Ctl_8 & DESC_CTL_ACXDONE) ++ p += sprintf(p, "%02u free (%02X)%s%s\n", i, txdesc->Ctl_8, thd, ttl); ++ else ++ p += sprintf(p, "%02u tx (%02X)%s%s\n", i, txdesc->Ctl_8, thd, ttl); ++ txdesc = advance_txdesc(adev, txdesc, 1); ++ } ++ p += sprintf(p, ++ "\n" ++ "** PCI data **\n" ++ "txbuf_start %p, txbuf_area_size %u, txbuf_startphy %08llx\n" ++ "txdesc_size %u, txdesc_start %p\n" ++ "txhostdesc_start %p, txhostdesc_area_size %u, txhostdesc_startphy %08llx\n" ++ "rxdesc_start %p\n" ++ "rxhostdesc_start %p, rxhostdesc_area_size %u, rxhostdesc_startphy %08llx\n" ++ "rxbuf_start %p, rxbuf_area_size %u, rxbuf_startphy %08llx\n", ++ adev->txbuf_start, adev->txbuf_area_size, ++ (unsigned long long)adev->txbuf_startphy, ++ adev->txdesc_size, adev->txdesc_start, ++ adev->txhostdesc_start, adev->txhostdesc_area_size, ++ (unsigned long long)adev->txhostdesc_startphy, ++ adev->rxdesc_start, ++ adev->rxhostdesc_start, adev->rxhostdesc_area_size, ++ (unsigned long long)adev->rxhostdesc_startphy, ++ adev->rxbuf_start, adev->rxbuf_area_size, ++ (unsigned long long)adev->rxbuf_startphy); ++ ++ FN_EXIT0; ++ return p; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acxpci_proc_eeprom_output(char *buf, acx_device_t *adev) ++{ ++ char *p = buf; ++ int i; ++ ++ FN_ENTER; ++ ++ for (i = 0; i < 0x400; i++) { ++ acxpci_read_eeprom_byte(adev, i, p++); ++ } ++ ++ FN_EXIT1(p - buf); ++ return p - buf; ++} ++ ++ ++/*********************************************************************** ++*/ ++void ++acxpci_set_interrupt_mask(acx_device_t *adev) ++{ ++ if (IS_ACX111(adev)) { ++ adev->irq_mask = (u16) ~(0 ++ /* | HOST_INT_RX_DATA */ ++ | HOST_INT_TX_COMPLETE ++ /* | HOST_INT_TX_XFER */ ++ | HOST_INT_RX_COMPLETE ++ /* | HOST_INT_DTIM */ ++ /* | HOST_INT_BEACON */ ++ /* | HOST_INT_TIMER */ ++ /* | HOST_INT_KEY_NOT_FOUND */ ++ | HOST_INT_IV_ICV_FAILURE ++ | HOST_INT_CMD_COMPLETE ++ | HOST_INT_INFO ++ /* | HOST_INT_OVERFLOW */ ++ /* | HOST_INT_PROCESS_ERROR */ ++ | HOST_INT_SCAN_COMPLETE ++ | HOST_INT_FCS_THRESHOLD ++ /* | HOST_INT_UNKNOWN */ ++ ); ++ /* Or else acx100 won't signal cmd completion, right? */ ++ adev->irq_mask_off = (u16)~( HOST_INT_CMD_COMPLETE ); /* 0xfdff */ ++ } else { ++ adev->irq_mask = (u16) ~(0 ++ /* | HOST_INT_RX_DATA */ ++ | HOST_INT_TX_COMPLETE ++ /* | HOST_INT_TX_XFER */ ++ | HOST_INT_RX_COMPLETE ++ /* | HOST_INT_DTIM */ ++ /* | HOST_INT_BEACON */ ++ /* | HOST_INT_TIMER */ ++ /* | HOST_INT_KEY_NOT_FOUND */ ++ /* | HOST_INT_IV_ICV_FAILURE */ ++ | HOST_INT_CMD_COMPLETE ++ | HOST_INT_INFO ++ /* | HOST_INT_OVERFLOW */ ++ /* | HOST_INT_PROCESS_ERROR */ ++ | HOST_INT_SCAN_COMPLETE ++ /* | HOST_INT_FCS_THRESHOLD */ ++ /* | HOST_INT_UNKNOWN */ ++ ); ++ adev->irq_mask_off = (u16)~( HOST_INT_UNKNOWN ); /* 0x7fff */ ++ } ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acx100pci_s_set_tx_level(acx_device_t *adev, u8 level_dbm) ++{ ++ /* since it can be assumed that at least the Maxim radio has a ++ * maximum power output of 20dBm and since it also can be ++ * assumed that these values drive the DAC responsible for ++ * setting the linear Tx level, I'd guess that these values ++ * should be the corresponding linear values for a dBm value, ++ * in other words: calculate the values from that formula: ++ * Y [dBm] = 10 * log (X [mW]) ++ * then scale the 0..63 value range onto the 1..100mW range (0..20 dBm) ++ * and you're done... ++ * Hopefully that's ok, but you never know if we're actually ++ * right... (especially since Windows XP doesn't seem to show ++ * actual Tx dBm values :-P) */ ++ ++ /* NOTE: on Maxim, value 30 IS 30mW, and value 10 IS 10mW - so the ++ * values are EXACTLY mW!!! Not sure about RFMD and others, ++ * though... */ ++ static const u8 dbm2val_maxim[21] = { ++ 63, 63, 63, 62, ++ 61, 61, 60, 60, ++ 59, 58, 57, 55, ++ 53, 50, 47, 43, ++ 38, 31, 23, 13, ++ 0 ++ }; ++ static const u8 dbm2val_rfmd[21] = { ++ 0, 0, 0, 1, ++ 2, 2, 3, 3, ++ 4, 5, 6, 8, ++ 10, 13, 16, 20, ++ 25, 32, 41, 50, ++ 63 ++ }; ++ const u8 *table; ++ ++ switch (adev->radio_type) { ++ case RADIO_MAXIM_0D: ++ table = &dbm2val_maxim[0]; ++ break; ++ case RADIO_RFMD_11: ++ case RADIO_RALINK_15: ++ table = &dbm2val_rfmd[0]; ++ break; ++ default: ++ printk("%s: unknown/unsupported radio type, " ++ "cannot modify tx power level yet!\n", ++ adev->ndev->name); ++ return NOT_OK; ++ } ++ printk("%s: changing radio power level to %u dBm (%u)\n", ++ adev->ndev->name, level_dbm, table[level_dbm]); ++ acxpci_s_write_phy_reg(adev, 0x11, table[level_dbm]); ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** Data for init_module/cleanup_module ++*/ ++static const struct pci_device_id ++acxpci_id_tbl[] __devinitdata = { ++ { ++ .vendor = PCI_VENDOR_ID_TI, ++ .device = PCI_DEVICE_ID_TI_TNETW1100A, ++ .subvendor = PCI_ANY_ID, ++ .subdevice = PCI_ANY_ID, ++ .driver_data = CHIPTYPE_ACX100, ++ }, ++ { ++ .vendor = PCI_VENDOR_ID_TI, ++ .device = PCI_DEVICE_ID_TI_TNETW1100B, ++ .subvendor = PCI_ANY_ID, ++ .subdevice = PCI_ANY_ID, ++ .driver_data = CHIPTYPE_ACX100, ++ }, ++ { ++ .vendor = PCI_VENDOR_ID_TI, ++ .device = PCI_DEVICE_ID_TI_TNETW1130, ++ .subvendor = PCI_ANY_ID, ++ .subdevice = PCI_ANY_ID, ++ .driver_data = CHIPTYPE_ACX111, ++ }, ++ { ++ .vendor = 0, ++ .device = 0, ++ .subvendor = 0, ++ .subdevice = 0, ++ .driver_data = 0, ++ } ++}; ++ ++MODULE_DEVICE_TABLE(pci, acxpci_id_tbl); ++ ++/* FIXME: checks should be removed once driver is included in the kernel */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 11) ++/* pci_name() got introduced at start of 2.6.x, ++ * got mandatory (slot_name member removed) in 2.6.11-bk1 */ ++#define pci_name(x) x->slot_name ++#endif ++ ++static struct pci_driver ++acxpci_drv_id = { ++ .name = "acx_pci", ++ .id_table = acxpci_id_tbl, ++ .probe = acxpci_e_probe, ++ .remove = __devexit_p(acxpci_e_remove), ++#ifdef CONFIG_PM ++ .suspend = acxpci_e_suspend, ++ .resume = acxpci_e_resume ++#endif /* CONFIG_PM */ ++}; ++ ++ ++/*********************************************************************** ++** acxpci_e_init_module ++** ++** Module initialization routine, called once at module load time ++*/ ++int __init ++acxpci_e_init_module(void) ++{ ++ int res; ++ ++ FN_ENTER; ++ ++#if (ACX_IO_WIDTH==32) ++ printk("acx: compiled to use 32bit I/O access. " ++ "I/O timing issues might occur, such as " ++ "non-working firmware upload. Report them\n"); ++#else ++ printk("acx: compiled to use 16bit I/O access only " ++ "(compatibility mode)\n"); ++#endif ++ ++#ifdef __LITTLE_ENDIAN ++#define ENDIANNESS_STRING "running on a little-endian CPU\n" ++#else ++#define ENDIANNESS_STRING "running on a BIG-ENDIAN CPU\n" ++#endif ++ log(L_INIT, ++ ENDIANNESS_STRING ++ "PCI module " ACX_RELEASE " initialized, " ++ "waiting for cards to probe...\n" ++ ); ++ ++ res = pci_register_driver(&acxpci_drv_id); ++ FN_EXIT1(res); ++ return res; ++} ++ ++ ++/*********************************************************************** ++** acxpci_e_cleanup_module ++** ++** Called at module unload time. This is our last chance to ++** clean up after ourselves. ++*/ ++void __exit ++acxpci_e_cleanup_module(void) ++{ ++ FN_ENTER; ++ ++ pci_unregister_driver(&acxpci_drv_id); ++ ++ FN_EXIT0; ++} +Index: linux-2.6.23/drivers/net/wireless/acx/rx3000_acx.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/rx3000_acx.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,110 @@ ++/* ++ * WLAN (TI TNETW1100B) support in the HP iPAQ RX3000 ++ * ++ * Copyright (c) 2006 SDG Systems, LLC ++ * Copyright (c) 2006 Roman Moravcik ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ * Based on hx4700_acx.c ++ */ ++ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "acx_hw.h" ++ ++extern struct platform_device s3c_device_asic3; ++ ++static int rx3000_wlan_start(void) ++{ ++ DPM_DEBUG("rx3000_acx: Turning on\n"); ++ asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, ASIC3_GPB3); ++ mdelay(20); ++ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC13, ASIC3_GPC13); ++ mdelay(20); ++ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC11, ASIC3_GPC11); ++ mdelay(100); ++ asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, ASIC3_GPB3); ++ mdelay(20); ++ s3c2410_gpio_cfgpin(S3C2410_GPA15, S3C2410_GPA15_nGCS4); ++ mdelay(100); ++ s3c2410_gpio_setpin(S3C2410_GPA11, 0); ++ mdelay(50); ++ s3c2410_gpio_setpin(S3C2410_GPA11, 1); ++ led_trigger_event_shared(rx3000_radio_trig, LED_FULL); ++ return 0; ++} ++ ++static int rx3000_wlan_stop(void) ++{ ++ DPM_DEBUG("rx3000_acx: Turning off\n"); ++ s3c2410_gpio_setpin(S3C2410_GPA15, 1); ++ s3c2410_gpio_cfgpin(S3C2410_GPA15, S3C2410_GPA15_OUT); ++ asic3_set_gpio_out_b(&s3c_device_asic3.dev, ASIC3_GPB3, 0); ++ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC13, 0); ++ asic3_set_gpio_out_c(&s3c_device_asic3.dev, ASIC3_GPC11, 0); ++ led_trigger_event_shared(rx3000_radio_trig, LED_OFF); ++ return 0; ++} ++ ++static struct resource acx_resources[] = { ++ [0] = { ++ .start = RX3000_PA_WLAN, ++ .end = RX3000_PA_WLAN + 0x20, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_EINT16, ++ .end = IRQ_EINT16, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct acx_hardware_data acx_data = { ++ .start_hw = rx3000_wlan_start, ++ .stop_hw = rx3000_wlan_stop, ++}; ++ ++static struct platform_device acx_device = { ++ .name = "acx-mem", ++ .dev = { ++ .platform_data = &acx_data, ++ }, ++ .num_resources = ARRAY_SIZE(acx_resources), ++ .resource = acx_resources, ++}; ++ ++static int __init rx3000_wlan_init(void) ++{ ++ printk("rx3000_wlan_init: acx-mem platform_device_register\n"); ++ return platform_device_register(&acx_device); ++} ++ ++ ++static void __exit rx3000_wlan_exit(void) ++{ ++ platform_device_unregister(&acx_device); ++} ++ ++module_init(rx3000_wlan_init); ++module_exit(rx3000_wlan_exit); ++ ++MODULE_AUTHOR("Todd Blumer , Roman Moravcik "); ++MODULE_DESCRIPTION("WLAN driver for HP iPAQ RX3000"); ++MODULE_LICENSE("GPL"); ++ +Index: linux-2.6.23/drivers/net/wireless/acx/setrate.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/setrate.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,213 @@ ++/* TODO: stop #including, move into wireless.c ++ * until then, keep in sync copies in prism54/ and acx/ dirs ++ * code+data size: less than 1k */ ++ ++enum { ++ DOT11_RATE_1, ++ DOT11_RATE_2, ++ DOT11_RATE_5, ++ DOT11_RATE_11, ++ DOT11_RATE_22, ++ DOT11_RATE_33, ++ DOT11_RATE_6, ++ DOT11_RATE_9, ++ DOT11_RATE_12, ++ DOT11_RATE_18, ++ DOT11_RATE_24, ++ DOT11_RATE_36, ++ DOT11_RATE_48, ++ DOT11_RATE_54 ++}; ++enum { ++ DOT11_MOD_DBPSK, ++ DOT11_MOD_DQPSK, ++ DOT11_MOD_CCK, ++ DOT11_MOD_OFDM, ++ DOT11_MOD_CCKOFDM, ++ DOT11_MOD_PBCC ++}; ++static const u8 ratelist[] = { 1,2,5,11,22,33,6,9,12,18,24,36,48,54 }; ++static const u8 dot11ratebyte[] = { 1*2,2*2,11,11*2,22*2,33*2,6*2,9*2,12*2,18*2,24*2,36*2,48*2,54*2 }; ++static const u8 default_modulation[] = { ++ DOT11_MOD_DBPSK, ++ DOT11_MOD_DQPSK, ++ DOT11_MOD_CCK, ++ DOT11_MOD_CCK, ++ DOT11_MOD_PBCC, ++ DOT11_MOD_PBCC, ++ DOT11_MOD_OFDM, ++ DOT11_MOD_OFDM, ++ DOT11_MOD_OFDM, ++ DOT11_MOD_OFDM, ++ DOT11_MOD_OFDM, ++ DOT11_MOD_OFDM, ++ DOT11_MOD_OFDM, ++ DOT11_MOD_OFDM ++}; ++ ++static /* TODO: remove 'static' when moved to wireless.c */ ++int ++rate_mbit2enum(int n) { ++ int i=0; ++ while(i=DOT11_RATE_6) return DOT11_MOD_OFDM; */ ++ return default_modulation[r_enum]; ++ } ++ if(suffix=='c') { ++ if(r_enumDOT11_RATE_11) return -EINVAL; ++ return DOT11_MOD_CCK; ++ } ++ if(suffix=='p') { ++ if(r_enumDOT11_RATE_33) return -EINVAL; ++ return DOT11_MOD_PBCC; ++ } ++ if(suffix=='o') { ++ if(r_enumINT_MAX) return -EINVAL; ++ ++ rate_enum = rate_mbit2enum(rate_mbit); ++ if(rate_enum<0) return rate_enum; ++ ++ c = *str; ++ mod = get_modulation(rate_enum, c); ++ if(mod<0) return mod; ++ ++ if(c>='a' && c<='z') c = *++str; ++ if(c!=',' && c!=' ' && c!='\0') return -EINVAL; ++ ++ if(supported) { ++ int r = supported(rate_mbit, mod, opaque); ++ if(r) return r; ++ } ++ ++ *vector++ = dot11ratebyte[rate_enum] | or_mask; ++ ++ size--; ++ str++; ++ } while(size>0 && c==','); ++ ++ if(size<1) return -E2BIG; ++ *vector=0; /* TODO: sort, remove dups? */ ++ ++ *pstr = str-1; ++ return 0; ++} ++ ++static /* TODO: remove 'static' when moved to wireless.c */ ++int ++fill_ratevectors(const char *str, u8 *brate, u8 *orate, int size, ++ int (*supported)(int mbit, int mod, void *opaque), void *opaque) ++{ ++ int r; ++ ++ r = fill_ratevector(&str, brate, size, supported, opaque, 0x80); ++ if(r) return r; ++ ++ orate[0] = 0; ++ if(*str==' ') { ++ str++; ++ r = fill_ratevector(&str, orate, size, supported, opaque, 0); ++ if(r) return r; ++ /* TODO: sanitize, e.g. remove/error on rates already in basic rate set? */ ++ } ++ if(*str) ++ return -EINVAL; ++ ++ return 0; ++} ++#endif ++ ++/* TODO: use u64 masks? */ ++ ++static int ++fill_ratemask(const char **pstr, u32* mask, ++ int (*supported)(int mbit, int mod,void *opaque), ++ u32 (*gen_mask)(int mbit, int mod,void *opaque), ++ void *opaque) ++{ ++ unsigned long rate_mbit; ++ int rate_enum,mod; ++ u32 m = 0; ++ const char *str = *pstr; ++ char c; ++ ++ do { ++ rate_mbit = simple_strtoul(str, (char**)&str, 10); ++ if(rate_mbit>INT_MAX) return -EINVAL; ++ ++ rate_enum = rate_mbit2enum(rate_mbit); ++ if(rate_enum<0) return rate_enum; ++ ++ c = *str; ++ mod = get_modulation(rate_enum, c); ++ if(mod<0) return mod; ++ ++ if(c>='a' && c<='z') c = *++str; ++ if(c!=',' && c!=' ' && c!='\0') return -EINVAL; ++ ++ if(supported) { ++ int r = supported(rate_mbit, mod, opaque); ++ if(r) return r; ++ } ++ ++ m |= gen_mask(rate_mbit, mod, opaque); ++ str++; ++ } while(c==','); ++ ++ *pstr = str-1; ++ *mask |= m; ++ return 0; ++} ++ ++static /* TODO: remove 'static' when moved to wireless.c */ ++int ++fill_ratemasks(const char *str, u32 *bmask, u32 *omask, ++ int (*supported)(int mbit, int mod,void *opaque), ++ u32 (*gen_mask)(int mbit, int mod,void *opaque), ++ void *opaque) ++{ ++ int r; ++ ++ r = fill_ratemask(&str, bmask, supported, gen_mask, opaque); ++ if(r) return r; ++ ++ if(*str==' ') { ++ str++; ++ r = fill_ratemask(&str, omask, supported, gen_mask, opaque); ++ if(r) return r; ++ } ++ if(*str) ++ return -EINVAL; ++ return 0; ++} +Index: linux-2.6.23/drivers/net/wireless/acx/usb.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/usb.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,1922 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++ ++/*********************************************************************** ++** USB support for TI ACX100 based devices. Many parts are taken from ++** the PCI driver. ++** ++** Authors: ++** Martin Wawro ++** Andreas Mohr ++** ++** LOCKING ++** callback functions called by USB core are running in interrupt context ++** and thus have names with _i_. ++*/ ++#define ACX_USB 1 ++ ++#include ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) ++#include ++#endif ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "acx.h" ++ ++ ++/*********************************************************************** ++*/ ++/* number of endpoints of an interface */ ++#define NUM_EP(intf) (intf)->altsetting[0].desc.bNumEndpoints ++#define EP(intf, nr) (intf)->altsetting[0].endpoint[(nr)].desc ++#define GET_DEV(udev) usb_get_dev((udev)) ++#define PUT_DEV(udev) usb_put_dev((udev)) ++#define SET_NETDEV_OWNER(ndev, owner) /* not needed anymore ??? */ ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14) ++/* removed in 2.6.14. We will use fake value for now */ ++#define URB_ASYNC_UNLINK 0 ++#endif ++ ++ ++/*********************************************************************** ++*/ ++/* ACX100 (TNETW1100) USB device: D-Link DWL-120+ */ ++#define ACX100_VENDOR_ID 0x2001 ++#define ACX100_PRODUCT_ID_UNBOOTED 0x3B01 ++#define ACX100_PRODUCT_ID_BOOTED 0x3B00 ++ ++/* TNETW1450 USB devices */ ++#define VENDOR_ID_DLINK 0x07b8 /* D-Link Corp. */ ++#define PRODUCT_ID_WUG2400 0xb21a /* AboCom WUG2400 or SafeCom SWLUT-54125 */ ++#define VENDOR_ID_AVM_GMBH 0x057c ++#define PRODUCT_ID_AVM_WLAN_USB 0x5601 ++#define PRODUCT_ID_AVM_WLAN_USB_si 0x6201 /* "self install" named Version: driver kills kernel on inbound scans from fritz box ??? */ ++#define VENDOR_ID_ZCOM 0x0cde ++#define PRODUCT_ID_ZCOM_XG750 0x0017 /* not tested yet */ ++#define VENDOR_ID_TI 0x0451 ++#define PRODUCT_ID_TI_UNKNOWN 0x60c5 /* not tested yet */ ++ ++#define ACX_USB_CTRL_TIMEOUT 5500 /* steps in ms */ ++ ++/* Buffer size for fw upload, same for both ACX100 USB and TNETW1450 */ ++#define USB_RWMEM_MAXLEN 2048 ++ ++/* The number of bulk URBs to use */ ++#define ACX_TX_URB_CNT 8 ++#define ACX_RX_URB_CNT 2 ++ ++/* Should be sent to the bulkout endpoint */ ++#define ACX_USB_REQ_UPLOAD_FW 0x10 ++#define ACX_USB_REQ_ACK_CS 0x11 ++#define ACX_USB_REQ_CMD 0x12 ++ ++/*********************************************************************** ++** Prototypes ++*/ ++static int acxusb_e_probe(struct usb_interface *, const struct usb_device_id *); ++static void acxusb_e_disconnect(struct usb_interface *); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) ++static void acxusb_i_complete_tx(struct urb *); ++static void acxusb_i_complete_rx(struct urb *); ++#else ++static void acxusb_i_complete_tx(struct urb *, struct pt_regs *); ++static void acxusb_i_complete_rx(struct urb *, struct pt_regs *); ++#endif ++static int acxusb_e_open(struct net_device *); ++static int acxusb_e_close(struct net_device *); ++static void acxusb_i_set_rx_mode(struct net_device *); ++static int acxusb_boot(struct usb_device *, int is_tnetw1450, int *radio_type); ++ ++static void acxusb_l_poll_rx(acx_device_t *adev, usb_rx_t* rx); ++ ++static void acxusb_i_tx_timeout(struct net_device *); ++ ++/* static void dump_device(struct usb_device *); */ ++/* static void dump_device_descriptor(struct usb_device_descriptor *); */ ++/* static void dump_config_descriptor(struct usb_config_descriptor *); */ ++ ++/*********************************************************************** ++** Module Data ++*/ ++#define TXBUFSIZE sizeof(usb_txbuffer_t) ++/* ++ * Now, this is just plain lying, but the device insists in giving us ++ * huge packets. We supply extra space after rxbuffer. Need to understand ++ * it better... ++ */ ++#define RXBUFSIZE (sizeof(rxbuffer_t) + \ ++ (sizeof(usb_rx_t) - sizeof(struct usb_rx_plain))) ++ ++static const struct usb_device_id ++acxusb_ids[] = { ++ { USB_DEVICE(ACX100_VENDOR_ID, ACX100_PRODUCT_ID_BOOTED) }, ++ { USB_DEVICE(ACX100_VENDOR_ID, ACX100_PRODUCT_ID_UNBOOTED) }, ++ { USB_DEVICE(VENDOR_ID_DLINK, PRODUCT_ID_WUG2400) }, ++ { USB_DEVICE(VENDOR_ID_AVM_GMBH, PRODUCT_ID_AVM_WLAN_USB) }, ++ { USB_DEVICE(VENDOR_ID_AVM_GMBH, PRODUCT_ID_AVM_WLAN_USB_si) }, ++ { USB_DEVICE(VENDOR_ID_ZCOM, PRODUCT_ID_ZCOM_XG750) }, ++ { USB_DEVICE(VENDOR_ID_TI, PRODUCT_ID_TI_UNKNOWN) }, ++ {} ++}; ++ ++MODULE_DEVICE_TABLE(usb, acxusb_ids); ++ ++/* USB driver data structure as required by the kernel's USB core */ ++static struct usb_driver ++acxusb_driver = { ++ .name = "acx_usb", ++ .probe = acxusb_e_probe, ++ .disconnect = acxusb_e_disconnect, ++ .id_table = acxusb_ids ++}; ++ ++ ++/*********************************************************************** ++** USB helper ++** ++** ldd3 ch13 says: ++** When the function is usb_kill_urb, the urb lifecycle is stopped. This ++** function is usually used when the device is disconnected from the system, ++** in the disconnect callback. For some drivers, the usb_unlink_urb function ++** should be used to tell the USB core to stop an urb. This function does not ++** wait for the urb to be fully stopped before returning to the caller. ++** This is useful for stoppingthe urb while in an interrupt handler or when ++** a spinlock is held, as waiting for a urb to fully stop requires the ability ++** for the USB core to put the calling process to sleep. This function requires ++** that the URB_ASYNC_UNLINK flag value be set in the urb that is being asked ++** to be stopped in order to work properly. ++** ++** (URB_ASYNC_UNLINK is obsolete, usb_unlink_urb will always be ++** asynchronous while usb_kill_urb is synchronous and should be called ++** directly (drivers/usb/core/urb.c)) ++** ++** In light of this, timeout is just for paranoid reasons... ++* ++* Actually, it's useful for debugging. If we reach timeout, we're doing ++* something wrong with the urbs. ++*/ ++static void ++acxusb_unlink_urb(struct urb* urb) ++{ ++ if (!urb) ++ return; ++ ++ if (urb->status == -EINPROGRESS) { ++ int timeout = 10; ++ ++ usb_unlink_urb(urb); ++ while (--timeout && urb->status == -EINPROGRESS) { ++ mdelay(1); ++ } ++ if (!timeout) { ++ printk("acx_usb: urb unlink timeout!\n"); ++ } ++ } ++} ++ ++ ++/*********************************************************************** ++** EEPROM and PHY read/write helpers ++*/ ++/*********************************************************************** ++** acxusb_s_read_phy_reg ++*/ ++int ++acxusb_s_read_phy_reg(acx_device_t *adev, u32 reg, u8 *charbuf) ++{ ++ /* mem_read_write_t mem; */ ++ ++ FN_ENTER; ++ ++ printk("%s doesn't seem to work yet, disabled.\n", __func__); ++ ++ /* ++ mem.addr = cpu_to_le16(reg); ++ mem.type = cpu_to_le16(0x82); ++ mem.len = cpu_to_le32(4); ++ acx_s_issue_cmd(adev, ACX1xx_CMD_MEM_READ, &mem, sizeof(mem)); ++ *charbuf = mem.data; ++ log(L_DEBUG, "read radio PHY[0x%04X]=0x%02X\n", reg, *charbuf); ++ */ ++ ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++/*********************************************************************** ++*/ ++int ++acxusb_s_write_phy_reg(acx_device_t *adev, u32 reg, u8 value) ++{ ++ mem_read_write_t mem; ++ ++ FN_ENTER; ++ ++ mem.addr = cpu_to_le16(reg); ++ mem.type = cpu_to_le16(0x82); ++ mem.len = cpu_to_le32(4); ++ mem.data = value; ++ acx_s_issue_cmd(adev, ACX1xx_CMD_MEM_WRITE, &mem, sizeof(mem)); ++ log(L_DEBUG, "write radio PHY[0x%04X]=0x%02X\n", reg, value); ++ ++ FN_EXIT1(OK); ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acxusb_s_issue_cmd_timeo ++** Excecutes a command in the command mailbox ++** ++** buffer = a pointer to the data. ++** The data must not include 4 byte command header ++*/ ++ ++/* TODO: ideally we shall always know how much we need ++** and this shall be 0 */ ++#define BOGUS_SAFETY_PADDING 0x40 ++ ++#undef FUNC ++#define FUNC "issue_cmd" ++ ++#if !ACX_DEBUG ++int ++acxusb_s_issue_cmd_timeo( ++ acx_device_t *adev, ++ unsigned cmd, ++ void *buffer, ++ unsigned buflen, ++ unsigned timeout) ++{ ++#else ++int ++acxusb_s_issue_cmd_timeo_debug( ++ acx_device_t *adev, ++ unsigned cmd, ++ void *buffer, ++ unsigned buflen, ++ unsigned timeout, ++ const char* cmdstr) ++{ ++#endif ++ /* USB ignores timeout param */ ++ ++ struct usb_device *usbdev; ++ struct { ++ u16 cmd; ++ u16 status; ++ u8 data[1]; ++ } ACX_PACKED *loc; ++ const char *devname; ++ int acklen, blocklen, inpipe, outpipe; ++ int cmd_status; ++ int result; ++ ++ FN_ENTER; ++ ++ devname = adev->ndev->name; ++ /* no "wlan%%d: ..." please */ ++ if (!devname || !devname[0] || devname[4]=='%') ++ devname = "acx"; ++ ++ log(L_CTL, FUNC"(cmd:%s,buflen:%u,type:0x%04X)\n", ++ cmdstr, buflen, ++ buffer ? le16_to_cpu(((acx_ie_generic_t *)buffer)->type) : -1); ++ ++ loc = kmalloc(buflen + 4 + BOGUS_SAFETY_PADDING, GFP_KERNEL); ++ if (!loc) { ++ printk("%s: "FUNC"(): no memory for data buffer\n", devname); ++ goto bad; ++ } ++ ++ /* get context from acx_device */ ++ usbdev = adev->usbdev; ++ ++ /* check which kind of command was issued */ ++ loc->cmd = cpu_to_le16(cmd); ++ loc->status = 0; ++ ++/* NB: buflen == frmlen + 4 ++** ++** Interrogate: write 8 bytes: (cmd,status,rid,frmlen), then ++** read (cmd,status,rid,frmlen,data[frmlen]) back ++** ++** Configure: write (cmd,status,rid,frmlen,data[frmlen]) ++** ++** Possibly bogus special handling of ACX1xx_IE_SCAN_STATUS removed ++*/ ++ ++ /* now write the parameters of the command if needed */ ++ acklen = buflen + 4 + BOGUS_SAFETY_PADDING; ++ blocklen = buflen; ++ if (buffer && buflen) { ++ /* if it's an INTERROGATE command, just pass the length ++ * of parameters to read, as data */ ++ if (cmd == ACX1xx_CMD_INTERROGATE) { ++ blocklen = 4; ++ acklen = buflen + 4; ++ } ++ memcpy(loc->data, buffer, blocklen); ++ } ++ blocklen += 4; /* account for cmd,status */ ++ ++ /* obtain the I/O pipes */ ++ outpipe = usb_sndctrlpipe(usbdev, 0); ++ inpipe = usb_rcvctrlpipe(usbdev, 0); ++ log(L_CTL, "ctrl inpipe=0x%X outpipe=0x%X\n", inpipe, outpipe); ++ log(L_CTL, "sending USB control msg (out) (blocklen=%d)\n", blocklen); ++ if (acx_debug & L_DATA) ++ acx_dump_bytes(loc, blocklen); ++ ++ result = usb_control_msg(usbdev, outpipe, ++ ACX_USB_REQ_CMD, /* request */ ++ USB_TYPE_VENDOR|USB_DIR_OUT, /* requesttype */ ++ 0, /* value */ ++ 0, /* index */ ++ loc, /* dataptr */ ++ blocklen, /* size */ ++ ACX_USB_CTRL_TIMEOUT /* timeout in ms */ ++ ); ++ ++ if (result == -ENODEV) { ++ log(L_CTL, "no device present (unplug?)\n"); ++ goto good; ++ } ++ ++ log(L_CTL, "wrote %d bytes\n", result); ++ if (result < 0) { ++ goto bad; ++ } ++ ++ /* check for device acknowledge */ ++ log(L_CTL, "sending USB control msg (in) (acklen=%d)\n", acklen); ++ loc->status = 0; /* delete old status flag -> set to IDLE */ ++ /* shall we zero out the rest? */ ++ result = usb_control_msg(usbdev, inpipe, ++ ACX_USB_REQ_CMD, /* request */ ++ USB_TYPE_VENDOR|USB_DIR_IN, /* requesttype */ ++ 0, /* value */ ++ 0, /* index */ ++ loc, /* dataptr */ ++ acklen, /* size */ ++ ACX_USB_CTRL_TIMEOUT /* timeout in ms */ ++ ); ++ if (result < 0) { ++ printk("%s: "FUNC"(): USB read error %d\n", devname, result); ++ goto bad; ++ } ++ if (acx_debug & L_CTL) { ++ printk("read %d bytes: ", result); ++ acx_dump_bytes(loc, result); ++ } ++ ++/* ++ check for result==buflen+4? Was seen: ++ ++interrogate(type:ACX100_IE_DOT11_ED_THRESHOLD,len:4) ++issue_cmd(cmd:ACX1xx_CMD_INTERROGATE,buflen:8,type:4111) ++ctrl inpipe=0x80000280 outpipe=0x80000200 ++sending USB control msg (out) (blocklen=8) ++01 00 00 00 0F 10 04 00 ++wrote 8 bytes ++sending USB control msg (in) (acklen=12) sizeof(loc->data ++read 4 bytes <==== MUST BE 12!! ++*/ ++ ++ cmd_status = le16_to_cpu(loc->status); ++ if (cmd_status != 1) { ++ printk("%s: "FUNC"(): cmd_status is not SUCCESS: %d (%s)\n", ++ devname, cmd_status, acx_cmd_status_str(cmd_status)); ++ /* TODO: goto bad; ? */ ++ } ++ if ((cmd == ACX1xx_CMD_INTERROGATE) && buffer && buflen) { ++ memcpy(buffer, loc->data, buflen); ++ log(L_CTL, "response frame: cmd=0x%04X status=%d\n", ++ le16_to_cpu(loc->cmd), ++ cmd_status); ++ } ++good: ++ kfree(loc); ++ FN_EXIT1(OK); ++ return OK; ++bad: ++ /* Give enough info so that callers can avoid ++ ** printing their own diagnostic messages */ ++#if ACX_DEBUG ++ printk("%s: "FUNC"(cmd:%s) FAILED\n", devname, cmdstr); ++#else ++ printk("%s: "FUNC"(cmd:0x%04X) FAILED\n", devname, cmd); ++#endif ++ dump_stack(); ++ kfree(loc); ++ FN_EXIT1(NOT_OK); ++ return NOT_OK; ++} ++ ++ ++/*********************************************************************** ++** acxusb_boot() ++** Inputs: ++** usbdev -> Pointer to kernel's usb_device structure ++** ++** Returns: ++** (int) Errorcode or 0 on success ++** ++** This function triggers the loading of the firmware image from harddisk ++** and then uploads the firmware to the USB device. After uploading the ++** firmware and transmitting the checksum, the device resets and appears ++** as a new device on the USB bus (the device we can finally deal with) ++*/ ++static inline int ++acxusb_fw_needs_padding(firmware_image_t *fw_image, unsigned int usb_maxlen) ++{ ++ unsigned int num_xfers = ((fw_image->size - 1) / usb_maxlen) + 1; ++ ++ return ((num_xfers % 2) == 0); ++} ++ ++static int ++acxusb_boot(struct usb_device *usbdev, int is_tnetw1450, int *radio_type) ++{ ++ char filename[sizeof("tiacx1NNusbcRR")]; ++ ++ firmware_image_t *fw_image = NULL; ++ char *usbbuf; ++ unsigned int offset; ++ unsigned int blk_len, inpipe, outpipe; ++ u32 num_processed; ++ u32 img_checksum, sum; ++ u32 file_size; ++ int result = -EIO; ++ int i; ++ ++ FN_ENTER; ++ ++ /* dump_device(usbdev); */ ++ ++ usbbuf = kmalloc(USB_RWMEM_MAXLEN, GFP_KERNEL); ++ if (!usbbuf) { ++ printk(KERN_ERR "acx: no memory for USB transfer buffer (%d bytes)\n", USB_RWMEM_MAXLEN); ++ result = -ENOMEM; ++ goto end; ++ } ++ if (is_tnetw1450) { ++ /* Obtain the I/O pipes */ ++ outpipe = usb_sndbulkpipe(usbdev, 1); ++ inpipe = usb_rcvbulkpipe(usbdev, 2); ++ ++ printk(KERN_DEBUG "wait for device ready\n"); ++ for (i = 0; i <= 2; i++) { ++ result = usb_bulk_msg(usbdev, inpipe, ++ usbbuf, ++ USB_RWMEM_MAXLEN, ++ &num_processed, ++ 2000 ++ ); ++ ++ if ((*(u32 *)&usbbuf[4] == 0x40000001) ++ && (*(u16 *)&usbbuf[2] == 0x1) ++ && ((*(u16 *)usbbuf & 0x3fff) == 0) ++ && ((*(u16 *)usbbuf & 0xc000) == 0xc000)) ++ break; ++ msleep(10); ++ } ++ if (i == 2) ++ goto fw_end; ++ ++ *radio_type = usbbuf[8]; ++ } else { ++ /* Obtain the I/O pipes */ ++ outpipe = usb_sndctrlpipe(usbdev, 0); ++ inpipe = usb_rcvctrlpipe(usbdev, 0); ++ ++ /* FIXME: shouldn't be hardcoded */ ++ *radio_type = RADIO_MAXIM_0D; ++ } ++ ++ snprintf(filename, sizeof(filename), "tiacx1%02dusbc%02X", ++ is_tnetw1450 * 11, *radio_type); ++ ++ fw_image = acx_s_read_fw(&usbdev->dev, filename, &file_size); ++ if (!fw_image) { ++ result = -EIO; ++ goto end; ++ } ++ log(L_INIT, "firmware size: %d bytes\n", file_size); ++ ++ img_checksum = le32_to_cpu(fw_image->chksum); ++ ++ if (is_tnetw1450) { ++ u8 cmdbuf[20]; ++ const u8 *p; ++ u8 need_padding; ++ u32 tmplen, val; ++ ++ memset(cmdbuf, 0, 16); ++ ++ need_padding = acxusb_fw_needs_padding(fw_image, USB_RWMEM_MAXLEN); ++ tmplen = need_padding ? file_size-4 : file_size-8; ++ *(u16 *)&cmdbuf[0] = 0xc000; ++ *(u16 *)&cmdbuf[2] = 0x000b; ++ *(u32 *)&cmdbuf[4] = tmplen; ++ *(u32 *)&cmdbuf[8] = file_size-8; ++ *(u32 *)&cmdbuf[12] = img_checksum; ++ ++ result = usb_bulk_msg(usbdev, outpipe, cmdbuf, 16, &num_processed, HZ); ++ if (result < 0) ++ goto fw_end; ++ ++ p = (const u8 *)&fw_image->size; ++ ++ /* first calculate checksum for image size part */ ++ sum = p[0]+p[1]+p[2]+p[3]; ++ p += 4; ++ ++ /* now continue checksum for firmware data part */ ++ tmplen = le32_to_cpu(fw_image->size); ++ for (i = 0; i < tmplen /* image size */; i++) { ++ sum += *p++; ++ } ++ ++ if (sum != le32_to_cpu(fw_image->chksum)) { ++ printk("acx: FATAL: firmware upload: " ++ "checksums don't match! " ++ "(0x%08x vs. 0x%08x)\n", ++ sum, fw_image->chksum); ++ goto fw_end; ++ } ++ ++ offset = 8; ++ while (offset < file_size) { ++ blk_len = file_size - offset; ++ if (blk_len > USB_RWMEM_MAXLEN) { ++ blk_len = USB_RWMEM_MAXLEN; ++ } ++ ++ log(L_INIT, "uploading firmware (%d bytes, offset=%d)\n", ++ blk_len, offset); ++ memcpy(usbbuf, ((u8 *)fw_image) + offset, blk_len); ++ ++ p = usbbuf; ++ for (i = 0; i < blk_len; i += 4) { ++ *(u32 *)p = be32_to_cpu(*(u32 *)p); ++ p += 4; ++ } ++ ++ result = usb_bulk_msg(usbdev, outpipe, usbbuf, blk_len, &num_processed, HZ); ++ if ((result < 0) || (num_processed != blk_len)) ++ goto fw_end; ++ offset += blk_len; ++ } ++ if (need_padding) { ++ printk(KERN_DEBUG "send padding\n"); ++ memset(usbbuf, 0, 4); ++ result = usb_bulk_msg(usbdev, outpipe, usbbuf, 4, &num_processed, HZ); ++ if ((result < 0) || (num_processed != 4)) ++ goto fw_end; ++ } ++ printk(KERN_DEBUG "read firmware upload result\n"); ++ memset(cmdbuf, 0, 20); /* additional memset */ ++ result = usb_bulk_msg(usbdev, inpipe, cmdbuf, 20, &num_processed, 2000); ++ if (result < 0) ++ goto fw_end; ++ if (*(u32 *)&cmdbuf[4] == 0x40000003) ++ goto fw_end; ++ if (*(u32 *)&cmdbuf[4]) ++ goto fw_end; ++ if (*(u16 *)&cmdbuf[16] != 1) ++ goto fw_end; ++ ++ val = *(u32 *)&cmdbuf[0]; ++ if ((val & 0x3fff) ++ || ((val & 0xc000) != 0xc000)) ++ goto fw_end; ++ ++ val = *(u32 *)&cmdbuf[8]; ++ if (val & 2) { ++ result = usb_bulk_msg(usbdev, inpipe, cmdbuf, 20, &num_processed, 2000); ++ if (result < 0) ++ goto fw_end; ++ val = *(u32 *)&cmdbuf[8]; ++ } ++ /* yup, no "else" here! */ ++ if (val & 1) { ++ memset(usbbuf, 0, 4); ++ result = usb_bulk_msg(usbdev, outpipe, usbbuf, 4, &num_processed, HZ); ++ if ((result < 0) || (!num_processed)) ++ goto fw_end; ++ } ++ ++ printk("TNETW1450 firmware upload successful!\n"); ++ result = 0; ++ goto end; ++fw_end: ++ result = -EIO; ++ goto end; ++ } else { ++ /* ACX100 USB */ ++ ++ /* now upload the firmware, slice the data into blocks */ ++ offset = 8; ++ while (offset < file_size) { ++ blk_len = file_size - offset; ++ if (blk_len > USB_RWMEM_MAXLEN) { ++ blk_len = USB_RWMEM_MAXLEN; ++ } ++ log(L_INIT, "uploading firmware (%d bytes, offset=%d)\n", ++ blk_len, offset); ++ memcpy(usbbuf, ((u8 *)fw_image) + offset, blk_len); ++ result = usb_control_msg(usbdev, outpipe, ++ ACX_USB_REQ_UPLOAD_FW, ++ USB_TYPE_VENDOR|USB_DIR_OUT, ++ (file_size - 8) & 0xffff, /* value */ ++ (file_size - 8) >> 16, /* index */ ++ usbbuf, /* dataptr */ ++ blk_len, /* size */ ++ 3000 /* timeout in ms */ ++ ); ++ offset += blk_len; ++ if (result < 0) { ++ printk(KERN_ERR "acx: error %d during upload " ++ "of firmware, aborting\n", result); ++ goto end; ++ } ++ } ++ ++ /* finally, send the checksum and reboot the device */ ++ /* does this trigger the reboot? */ ++ result = usb_control_msg(usbdev, outpipe, ++ ACX_USB_REQ_UPLOAD_FW, ++ USB_TYPE_VENDOR|USB_DIR_OUT, ++ img_checksum & 0xffff, /* value */ ++ img_checksum >> 16, /* index */ ++ NULL, /* dataptr */ ++ 0, /* size */ ++ 3000 /* timeout in ms */ ++ ); ++ if (result < 0) { ++ printk(KERN_ERR "acx: error %d during tx of checksum, " ++ "aborting\n", result); ++ goto end; ++ } ++ result = usb_control_msg(usbdev, inpipe, ++ ACX_USB_REQ_ACK_CS, ++ USB_TYPE_VENDOR|USB_DIR_IN, ++ img_checksum & 0xffff, /* value */ ++ img_checksum >> 16, /* index */ ++ usbbuf, /* dataptr */ ++ 8, /* size */ ++ 3000 /* timeout in ms */ ++ ); ++ if (result < 0) { ++ printk(KERN_ERR "acx: error %d during ACK of checksum, " ++ "aborting\n", result); ++ goto end; ++ } ++ if (*usbbuf != 0x10) { ++ printk(KERN_ERR "acx: invalid checksum?\n"); ++ result = -EINVAL; ++ goto end; ++ } ++ result = 0; ++ } ++ ++end: ++ vfree(fw_image); ++ kfree(usbbuf); ++ ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/* FIXME: maybe merge it with usual eeprom reading, into common code? */ ++static void ++acxusb_s_read_eeprom_version(acx_device_t *adev) ++{ ++ u8 eeprom_ver[0x8]; ++ ++ memset(eeprom_ver, 0, sizeof(eeprom_ver)); ++ acx_s_interrogate(adev, &eeprom_ver, ACX1FF_IE_EEPROM_VER); ++ ++ /* FIXME: which one of those values to take? */ ++ adev->eeprom_version = eeprom_ver[5]; ++} ++ ++ ++/* ++ * temporary helper function to at least fill important cfgopt members with ++ * useful replacement values until we figure out how one manages to fetch ++ * the configoption struct in the USB device case... ++ */ ++static int ++acxusb_s_fill_configoption(acx_device_t *adev) ++{ ++ adev->cfgopt_probe_delay = 200; ++ adev->cfgopt_dot11CCAModes = 4; ++ adev->cfgopt_dot11Diversity = 1; ++ adev->cfgopt_dot11ShortPreambleOption = 1; ++ adev->cfgopt_dot11PBCCOption = 1; ++ adev->cfgopt_dot11ChannelAgility = 0; ++ adev->cfgopt_dot11PhyType = 5; ++ adev->cfgopt_dot11TempType = 1; ++ return OK; ++} ++ ++ ++/*********************************************************************** ++** acxusb_e_probe() ++** ++** This function is invoked by the kernel's USB core whenever a new device is ++** attached to the system or the module is loaded. It is presented a usb_device ++** structure from which information regarding the device is obtained and evaluated. ++** In case this driver is able to handle one of the offered devices, it returns ++** a non-null pointer to a driver context and thereby claims the device. ++*/ ++ ++static void ++dummy_netdev_init(struct net_device *ndev) {} ++ ++static int ++acxusb_e_probe(struct usb_interface *intf, const struct usb_device_id *devID) ++{ ++ struct usb_device *usbdev = interface_to_usbdev(intf); ++ acx_device_t *adev = NULL; ++ struct net_device *ndev = NULL; ++ struct usb_config_descriptor *config; ++ struct usb_endpoint_descriptor *epdesc; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) ++ struct usb_host_endpoint *ep; ++#endif ++ struct usb_interface_descriptor *ifdesc; ++ const char* msg; ++ int numconfigs, numfaces, numep; ++ int result = OK; ++ int i; ++ int radio_type; ++ /* this one needs to be more precise in case there appears a TNETW1450 from the same vendor */ ++ int is_tnetw1450 = (usbdev->descriptor.idVendor != ACX100_VENDOR_ID); ++ ++ FN_ENTER; ++ ++ if (is_tnetw1450) { ++ /* Boot the device (i.e. upload the firmware) */ ++ acxusb_boot(usbdev, is_tnetw1450, &radio_type); ++ ++ /* TNETW1450-based cards will continue right away with ++ * the same USB ID after booting */ ++ } else { ++ /* First check if this is the "unbooted" hardware */ ++ if (usbdev->descriptor.idProduct == ACX100_PRODUCT_ID_UNBOOTED) { ++ ++ /* Boot the device (i.e. upload the firmware) */ ++ acxusb_boot(usbdev, is_tnetw1450, &radio_type); ++ ++ /* DWL-120+ will first boot the firmware, ++ * then later have a *separate* probe() run ++ * since its USB ID will have changed after ++ * firmware boot! ++ * Since the first probe() run has no ++ * other purpose than booting the firmware, ++ * simply return immediately. ++ */ ++ log(L_INIT, "finished booting, returning from probe()\n"); ++ result = OK; /* success */ ++ goto end; ++ } ++ else ++ /* device not unbooted, but invalid USB ID!? */ ++ if (usbdev->descriptor.idProduct != ACX100_PRODUCT_ID_BOOTED) ++ goto end_nodev; ++ } ++ ++/* Ok, so it's our device and it has already booted */ ++ ++ /* Allocate memory for a network device */ ++ ++ ndev = alloc_netdev(sizeof(*adev), "wlan%d", dummy_netdev_init); ++ /* (NB: memsets to 0 entire area) */ ++ if (!ndev) { ++ msg = "acx: no memory for netdev\n"; ++ goto end_nomem; ++ } ++ ++ /* Register the callbacks for the network device functions */ ++ ++ ether_setup(ndev); ++ ndev->open = &acxusb_e_open; ++ ndev->stop = &acxusb_e_close; ++ ndev->hard_start_xmit = (void *)&acx_i_start_xmit; ++ ndev->get_stats = (void *)&acx_e_get_stats; ++#if IW_HANDLER_VERSION <= 5 ++ ndev->get_wireless_stats = (void *)&acx_e_get_wireless_stats; ++#endif ++ ndev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; ++ ndev->set_multicast_list = (void *)&acxusb_i_set_rx_mode; ++#ifdef HAVE_TX_TIMEOUT ++ ndev->tx_timeout = &acxusb_i_tx_timeout; ++ ndev->watchdog_timeo = 4 * HZ; ++#endif ++ ndev->change_mtu = &acx_e_change_mtu; ++ SET_MODULE_OWNER(ndev); ++ ++ /* Setup private driver context */ ++ ++ adev = ndev2adev(ndev); ++ adev->ndev = ndev; ++ ++ adev->dev_type = DEVTYPE_USB; ++ adev->radio_type = radio_type; ++ if (is_tnetw1450) { ++ /* well, actually it's a TNETW1450, but since it ++ * seems to be sufficiently similar to TNETW1130, ++ * I don't want to change large amounts of code now */ ++ adev->chip_type = CHIPTYPE_ACX111; ++ } else { ++ adev->chip_type = CHIPTYPE_ACX100; ++ } ++ ++ adev->usbdev = usbdev; ++ spin_lock_init(&adev->lock); /* initial state: unlocked */ ++ sema_init(&adev->sem, 1); /* initial state: 1 (upped) */ ++ ++ /* Check that this is really the hardware we know about. ++ ** If not sure, at least notify the user that he ++ ** may be in trouble... ++ */ ++ numconfigs = (int)usbdev->descriptor.bNumConfigurations; ++ if (numconfigs != 1) ++ printk("acx: number of configurations is %d, " ++ "this driver only knows how to handle 1, " ++ "be prepared for surprises\n", numconfigs); ++ ++ config = &usbdev->config->desc; ++ numfaces = config->bNumInterfaces; ++ if (numfaces != 1) ++ printk("acx: number of interfaces is %d, " ++ "this driver only knows how to handle 1, " ++ "be prepared for surprises\n", numfaces); ++ ++ ifdesc = &intf->altsetting->desc; ++ numep = ifdesc->bNumEndpoints; ++ log(L_DEBUG, "# of endpoints: %d\n", numep); ++ ++ if (is_tnetw1450) { ++ adev->bulkoutep = 1; ++ adev->bulkinep = 2; ++ } else { ++ /* obtain information about the endpoint ++ ** addresses, begin with some default values ++ */ ++ adev->bulkoutep = 1; ++ adev->bulkinep = 1; ++ for (i = 0; i < numep; i++) { ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) ++ ep = usbdev->ep_in[i]; ++ if (!ep) ++ continue; ++ epdesc = &ep->desc; ++#else ++ epdesc = usb_epnum_to_ep_desc(usbdev, i); ++ if (!epdesc) ++ continue; ++#endif ++ if (epdesc->bmAttributes & USB_ENDPOINT_XFER_BULK) { ++ if (epdesc->bEndpointAddress & 0x80) ++ adev->bulkinep = epdesc->bEndpointAddress & 0xF; ++ else ++ adev->bulkoutep = epdesc->bEndpointAddress & 0xF; ++ } ++ } ++ } ++ log(L_DEBUG, "bulkout ep: 0x%X\n", adev->bulkoutep); ++ log(L_DEBUG, "bulkin ep: 0x%X\n", adev->bulkinep); ++ ++ /* already done by memset: adev->rxtruncsize = 0; */ ++ log(L_DEBUG, "TXBUFSIZE=%d RXBUFSIZE=%d\n", ++ (int) TXBUFSIZE, (int) RXBUFSIZE); ++ ++ /* Allocate the RX/TX containers. */ ++ adev->usb_tx = kmalloc(sizeof(usb_tx_t) * ACX_TX_URB_CNT, GFP_KERNEL); ++ if (!adev->usb_tx) { ++ msg = "acx: no memory for tx container"; ++ goto end_nomem; ++ } ++ adev->usb_rx = kmalloc(sizeof(usb_rx_t) * ACX_RX_URB_CNT, GFP_KERNEL); ++ if (!adev->usb_rx) { ++ msg = "acx: no memory for rx container"; ++ goto end_nomem; ++ } ++ ++ /* Setup URBs for bulk-in/out messages */ ++ for (i = 0; i < ACX_RX_URB_CNT; i++) { ++ adev->usb_rx[i].urb = usb_alloc_urb(0, GFP_KERNEL); ++ if (!adev->usb_rx[i].urb) { ++ msg = "acx: no memory for input URB\n"; ++ goto end_nomem; ++ } ++ adev->usb_rx[i].urb->status = 0; ++ adev->usb_rx[i].adev = adev; ++ adev->usb_rx[i].busy = 0; ++ } ++ ++ for (i = 0; i< ACX_TX_URB_CNT; i++) { ++ adev->usb_tx[i].urb = usb_alloc_urb(0, GFP_KERNEL); ++ if (!adev->usb_tx[i].urb) { ++ msg = "acx: no memory for output URB\n"; ++ goto end_nomem; ++ } ++ adev->usb_tx[i].urb->status = 0; ++ adev->usb_tx[i].adev = adev; ++ adev->usb_tx[i].busy = 0; ++ } ++ adev->tx_free = ACX_TX_URB_CNT; ++ ++ usb_set_intfdata(intf, adev); ++ SET_NETDEV_DEV(ndev, &intf->dev); ++ ++ /* TODO: move all of fw cmds to open()? But then we won't know our MAC addr ++ until ifup (it's available via reading ACX1xx_IE_DOT11_STATION_ID)... */ ++ ++ /* put acx out of sleep mode and initialize it */ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); ++ ++ result = acx_s_init_mac(adev); ++ if (result) ++ goto end; ++ ++ /* TODO: see similar code in pci.c */ ++ acxusb_s_read_eeprom_version(adev); ++ acxusb_s_fill_configoption(adev); ++ acx_s_set_defaults(adev); ++ acx_s_get_firmware_version(adev); ++ acx_display_hardware_details(adev); ++ ++ /* Register the network device */ ++ log(L_INIT, "registering network device\n"); ++ result = register_netdev(ndev); ++ if (result) { ++ msg = "acx: failed to register USB network device " ++ "(error %d)\n"; ++ goto end_nomem; ++ } ++ ++ acx_proc_register_entries(ndev); ++ ++ acx_stop_queue(ndev, "on probe"); ++ acx_carrier_off(ndev, "on probe"); ++ ++ printk("acx: USB module " ACX_RELEASE " loaded successfully\n"); ++ ++#if CMD_DISCOVERY ++ great_inquisitor(adev); ++#endif ++ ++ /* Everything went OK, we are happy now */ ++ result = OK; ++ goto end; ++ ++end_nomem: ++ printk(msg, result); ++ ++ if (ndev) { ++ if (adev->usb_rx) { ++ for (i = 0; i < ACX_RX_URB_CNT; i++) ++ usb_free_urb(adev->usb_rx[i].urb); ++ kfree(adev->usb_rx); ++ } ++ if (adev->usb_tx) { ++ for (i = 0; i < ACX_TX_URB_CNT; i++) ++ usb_free_urb(adev->usb_tx[i].urb); ++ kfree(adev->usb_tx); ++ } ++ free_netdev(ndev); ++ } ++ ++ result = -ENOMEM; ++ goto end; ++ ++end_nodev: ++ /* no device we could handle, return error. */ ++ result = -EIO; ++ ++end: ++ FN_EXIT1(result); ++ return result; ++} ++ ++ ++/*********************************************************************** ++** acxusb_e_disconnect() ++** ++** This function is invoked whenever the user pulls the plug from the USB ++** device or the module is removed from the kernel. In these cases, the ++** network devices have to be taken down and all allocated memory has ++** to be freed. ++*/ ++static void ++acxusb_e_disconnect(struct usb_interface *intf) ++{ ++ acx_device_t *adev = usb_get_intfdata(intf); ++ unsigned long flags; ++ int i; ++ ++ FN_ENTER; ++ ++ /* No WLAN device... no sense */ ++ if (!adev) ++ goto end; ++ ++ /* Unregister network device ++ * ++ * If the interface is up, unregister_netdev() will take ++ * care of calling our close() function, which takes ++ * care of unlinking the urbs, sending the device to ++ * sleep, etc... ++ * This can't be called with sem or lock held because ++ * _close() will try to grab it as well if it's called, ++ * deadlocking the machine. ++ */ ++ unregister_netdev(adev->ndev); ++ ++ acx_sem_lock(adev); ++ acx_lock(adev, flags); ++ /* This device exists no more */ ++ usb_set_intfdata(intf, NULL); ++ acx_proc_unregister_entries(adev->ndev); ++ ++ /* ++ * Here we only free them. _close() took care of ++ * unlinking them. ++ */ ++ for (i = 0; i < ACX_RX_URB_CNT; ++i) { ++ usb_free_urb(adev->usb_rx[i].urb); ++ } ++ for (i = 0; i< ACX_TX_URB_CNT; ++i) { ++ usb_free_urb(adev->usb_tx[i].urb); ++ } ++ ++ /* Freeing containers */ ++ kfree(adev->usb_rx); ++ kfree(adev->usb_tx); ++ ++ acx_unlock(adev, flags); ++ acx_sem_unlock(adev); ++ ++ free_netdev(adev->ndev); ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxusb_e_open() ++** This function is called when the user sets up the network interface. ++** It initializes a management timer, sets up the USB card and starts ++** the network tx queue and USB receive. ++*/ ++static int ++acxusb_e_open(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ int i; ++ ++ FN_ENTER; ++ ++ acx_sem_lock(adev); ++ ++ /* put the ACX100 out of sleep mode */ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_WAKE, NULL, 0); ++ ++ acx_init_task_scheduler(adev); ++ ++ init_timer(&adev->mgmt_timer); ++ adev->mgmt_timer.function = acx_i_timer; ++ adev->mgmt_timer.data = (unsigned long)adev; ++ ++ /* acx_s_start needs it */ ++ SET_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ acx_s_start(adev); ++ ++ /* don't acx_start_queue() here, we need to associate first */ ++ ++ acx_lock(adev, flags); ++ for (i = 0; i < ACX_RX_URB_CNT; i++) { ++ adev->usb_rx[i].urb->status = 0; ++ } ++ ++ acxusb_l_poll_rx(adev, &adev->usb_rx[0]); ++ ++ acx_unlock(adev, flags); ++ ++ acx_sem_unlock(adev); ++ ++ FN_EXIT0; ++ return 0; ++} ++ ++ ++/*********************************************************************** ++** acxusb_e_close() ++** ++** This function stops the network functionality of the interface (invoked ++** when the user calls ifconfig down). The tx queue is halted and ++** the device is marked as down. In case there were any pending USB bulk ++** transfers, these are unlinked (asynchronously). The module in-use count ++** is also decreased in this function. ++*/ ++static int ++acxusb_e_close(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ int i; ++ ++ FN_ENTER; ++ ++#ifdef WE_STILL_DONT_CARE_ABOUT_IT ++ /* Transmit a disassociate frame */ ++ lock ++ acx_l_transmit_disassoc(adev, &client); ++ unlock ++#endif ++ ++ acx_sem_lock(adev); ++ ++ CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP); ++ ++/* Code below is remarkably similar to acxpci_s_down(). Maybe we can merge them? */ ++ ++ /* Make sure we don't get any more rx requests */ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0); ++ acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0); ++ ++ /* ++ * We must do FLUSH *without* holding sem to avoid a deadlock. ++ * See pci.c:acxpci_s_down() for deails. ++ */ ++ acx_sem_unlock(adev); ++ FLUSH_SCHEDULED_WORK(); ++ acx_sem_lock(adev); ++ ++ /* Power down the device */ ++ acx_s_issue_cmd(adev, ACX1xx_CMD_SLEEP, NULL, 0); ++ ++ /* Stop the transmit queue, mark the device as DOWN */ ++ acx_lock(adev, flags); ++ acx_stop_queue(ndev, "on ifdown"); ++ acx_set_status(adev, ACX_STATUS_0_STOPPED); ++ /* stop pending rx/tx urb transfers */ ++ for (i = 0; i < ACX_TX_URB_CNT; i++) { ++ acxusb_unlink_urb(adev->usb_tx[i].urb); ++ adev->usb_tx[i].busy = 0; ++ } ++ for (i = 0; i < ACX_RX_URB_CNT; i++) { ++ acxusb_unlink_urb(adev->usb_rx[i].urb); ++ adev->usb_rx[i].busy = 0; ++ } ++ adev->tx_free = ACX_TX_URB_CNT; ++ acx_unlock(adev, flags); ++ ++ /* Must do this outside of lock */ ++ del_timer_sync(&adev->mgmt_timer); ++ ++ acx_sem_unlock(adev); ++ ++ FN_EXIT0; ++ return 0; ++} ++ ++ ++/*********************************************************************** ++** acxusb_l_poll_rx ++** This function (re)initiates a bulk-in USB transfer on a given urb ++*/ ++static void ++acxusb_l_poll_rx(acx_device_t *adev, usb_rx_t* rx) ++{ ++ struct usb_device *usbdev; ++ struct urb *rxurb; ++ int errcode, rxnum; ++ unsigned int inpipe; ++ ++ FN_ENTER; ++ ++ rxurb = rx->urb; ++ usbdev = adev->usbdev; ++ ++ rxnum = rx - adev->usb_rx; ++ ++ inpipe = usb_rcvbulkpipe(usbdev, adev->bulkinep); ++ if (unlikely(rxurb->status == -EINPROGRESS)) { ++ printk(KERN_ERR "acx: error, rx triggered while rx urb in progress\n"); ++ /* FIXME: this is nasty, receive is being cancelled by this code ++ * on the other hand, this should not happen anyway... ++ */ ++ usb_unlink_urb(rxurb); ++ } else ++ if (unlikely(rxurb->status == -ECONNRESET)) { ++ log(L_USBRXTX, "acx_usb: _poll_rx: connection reset\n"); ++ goto end; ++ } ++ rxurb->actual_length = 0; ++ usb_fill_bulk_urb(rxurb, usbdev, inpipe, ++ &rx->bulkin, /* dataptr */ ++ RXBUFSIZE, /* size */ ++ acxusb_i_complete_rx, /* handler */ ++ rx /* handler param */ ++ ); ++ rxurb->transfer_flags = URB_ASYNC_UNLINK; ++ ++ /* ATOMIC: we may be called from complete_rx() usb callback */ ++ errcode = usb_submit_urb(rxurb, GFP_ATOMIC); ++ /* FIXME: evaluate the error code! */ ++ log(L_USBRXTX, "SUBMIT RX (%d) inpipe=0x%X size=%d errcode=%d\n", ++ rxnum, inpipe, (int) RXBUFSIZE, errcode); ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxusb_i_complete_rx() ++** Inputs: ++** urb -> pointer to USB request block ++** regs -> pointer to register-buffer for syscalls (see asm/ptrace.h) ++** ++** This function is invoked by USB subsystem whenever a bulk receive ++** request returns. ++** The received data is then committed to the network stack and the next ++** USB receive is triggered. ++*/ ++static void ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) ++acxusb_i_complete_rx(struct urb *urb) ++#else ++acxusb_i_complete_rx(struct urb *urb, struct pt_regs *regs) ++#endif ++{ ++ acx_device_t *adev; ++ rxbuffer_t *ptr; ++ rxbuffer_t *inbuf; ++ usb_rx_t *rx; ++ unsigned long flags; ++ int size, remsize, packetsize, rxnum; ++ ++ FN_ENTER; ++ ++ BUG_ON(!urb->context); ++ ++ rx = (usb_rx_t *)urb->context; ++ adev = rx->adev; ++ ++ acx_lock(adev, flags); ++ ++ /* ++ * Happens on disconnect or close. Don't play with the urb. ++ * Don't resubmit it. It will get unlinked by close() ++ */ ++ if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) { ++ log(L_USBRXTX, "rx: device is down, not doing anything\n"); ++ goto end_unlock; ++ } ++ ++ inbuf = &rx->bulkin; ++ size = urb->actual_length; ++ remsize = size; ++ rxnum = rx - adev->usb_rx; ++ ++ log(L_USBRXTX, "RETURN RX (%d) status=%d size=%d\n", ++ rxnum, urb->status, size); ++ ++ /* Send the URB that's waiting. */ ++ log(L_USBRXTX, "rxnum=%d, sending=%d\n", rxnum, rxnum^1); ++ acxusb_l_poll_rx(adev, &adev->usb_rx[rxnum^1]); ++ ++ if (unlikely(size > sizeof(rxbuffer_t))) ++ printk("acx_usb: rx too large: %d, please report\n", size); ++ ++ /* check if the transfer was aborted */ ++ switch (urb->status) { ++ case 0: /* No error */ ++ break; ++ case -EOVERFLOW: ++ printk(KERN_ERR "acx: rx data overrun\n"); ++ adev->rxtruncsize = 0; /* Not valid anymore. */ ++ goto end_unlock; ++ case -ECONNRESET: ++ adev->rxtruncsize = 0; ++ goto end_unlock; ++ case -ESHUTDOWN: /* rmmod */ ++ adev->rxtruncsize = 0; ++ goto end_unlock; ++ default: ++ adev->rxtruncsize = 0; ++ adev->stats.rx_errors++; ++ printk("acx: rx error (urb status=%d)\n", urb->status); ++ goto end_unlock; ++ } ++ ++ if (unlikely(!size)) ++ printk("acx: warning, encountered zerolength rx packet\n"); ++ ++ if (urb->transfer_buffer != inbuf) ++ goto end_unlock; ++ ++ /* check if previous frame was truncated ++ ** FIXME: this code can only handle truncation ++ ** of consecutive packets! ++ */ ++ ptr = inbuf; ++ if (adev->rxtruncsize) { ++ int tail_size; ++ ++ ptr = &adev->rxtruncbuf; ++ packetsize = RXBUF_BYTES_USED(ptr); ++ if (acx_debug & L_USBRXTX) { ++ printk("handling truncated frame (truncsize=%d size=%d " ++ "packetsize(from trunc)=%d)\n", ++ adev->rxtruncsize, size, packetsize); ++ acx_dump_bytes(ptr, RXBUF_HDRSIZE); ++ acx_dump_bytes(inbuf, RXBUF_HDRSIZE); ++ } ++ ++ /* bytes needed for rxtruncbuf completion: */ ++ tail_size = packetsize - adev->rxtruncsize; ++ ++ if (size < tail_size) { ++ /* there is not enough data to complete this packet, ++ ** simply append the stuff to the truncation buffer ++ */ ++ memcpy(((char *)ptr) + adev->rxtruncsize, inbuf, size); ++ adev->rxtruncsize += size; ++ remsize = 0; ++ } else { ++ /* ok, this data completes the previously ++ ** truncated packet. copy it into a descriptor ++ ** and give it to the rest of the stack */ ++ ++ /* append tail to previously truncated part ++ ** NB: adev->rxtruncbuf (pointed to by ptr) can't ++ ** overflow because this is already checked before ++ ** truncation buffer was filled. See below, ++ ** "if (packetsize > sizeof(rxbuffer_t))..." code */ ++ memcpy(((char *)ptr) + adev->rxtruncsize, inbuf, tail_size); ++ ++ if (acx_debug & L_USBRXTX) { ++ printk("full trailing packet + 12 bytes:\n"); ++ acx_dump_bytes(inbuf, tail_size + RXBUF_HDRSIZE); ++ } ++ acx_l_process_rxbuf(adev, ptr); ++ adev->rxtruncsize = 0; ++ ptr = (rxbuffer_t *) (((char *)inbuf) + tail_size); ++ remsize -= tail_size; ++ } ++ log(L_USBRXTX, "post-merge size=%d remsize=%d\n", ++ size, remsize); ++ } ++ ++ /* size = USB data block size ++ ** remsize = unprocessed USB bytes left ++ ** ptr = current pos in USB data block ++ */ ++ while (remsize) { ++ if (remsize < RXBUF_HDRSIZE) { ++ printk("acx: truncated rx header (%d bytes)!\n", ++ remsize); ++ if (ACX_DEBUG) ++ acx_dump_bytes(ptr, remsize); ++ break; ++ } ++ ++ packetsize = RXBUF_BYTES_USED(ptr); ++ log(L_USBRXTX, "packet with packetsize=%d\n", packetsize); ++ ++ if (RXBUF_IS_TXSTAT(ptr)) { ++ /* do rate handling */ ++ usb_txstatus_t *stat = (void*)ptr; ++ u16 client_no = (u16)stat->hostdata; ++ ++ log(L_USBRXTX, "tx: stat: mac_cnt_rcvd:%04X " ++ "queue_index:%02X mac_status:%02X hostdata:%08X " ++ "rate:%u ack_failures:%02X rts_failures:%02X " ++ "rts_ok:%02X\n", ++ stat->mac_cnt_rcvd, ++ stat->queue_index, stat->mac_status, stat->hostdata, ++ stat->rate, stat->ack_failures, stat->rts_failures, ++ stat->rts_ok); ++ ++ if (adev->rate_auto && client_no < VEC_SIZE(adev->sta_list)) { ++ client_t *clt = &adev->sta_list[client_no]; ++ u16 cur = stat->hostdata >> 16; ++ ++ if (clt && clt->rate_cur == cur) { ++ acx_l_handle_txrate_auto(adev, clt, ++ cur, /* intended rate */ ++ stat->rate, 0, /* actually used rate */ ++ stat->mac_status, /* error? */ ++ ACX_TX_URB_CNT - adev->tx_free); ++ } ++ } ++ goto next; ++ } ++ ++ if (packetsize > sizeof(rxbuffer_t)) { ++ printk("acx: packet exceeds max wlan " ++ "frame size (%d > %d). size=%d\n", ++ packetsize, (int) sizeof(rxbuffer_t), size); ++ if (ACX_DEBUG) ++ acx_dump_bytes(ptr, 16); ++ /* FIXME: put some real error-handling in here! */ ++ break; ++ } ++ ++ if (packetsize > remsize) { ++ /* frame truncation handling */ ++ if (acx_debug & L_USBRXTX) { ++ printk("need to truncate packet, " ++ "packetsize=%d remsize=%d " ++ "size=%d bytes:", ++ packetsize, remsize, size); ++ acx_dump_bytes(ptr, RXBUF_HDRSIZE); ++ } ++ memcpy(&adev->rxtruncbuf, ptr, remsize); ++ adev->rxtruncsize = remsize; ++ break; ++ } ++ ++ /* packetsize <= remsize */ ++ /* now handle the received data */ ++ acx_l_process_rxbuf(adev, ptr); ++next: ++ ptr = (rxbuffer_t *)(((char *)ptr) + packetsize); ++ remsize -= packetsize; ++ if ((acx_debug & L_USBRXTX) && remsize) { ++ printk("more than one packet in buffer, " ++ "second packet hdr:"); ++ acx_dump_bytes(ptr, RXBUF_HDRSIZE); ++ } ++ } ++ ++end_unlock: ++ acx_unlock(adev, flags); ++/* end: */ ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++** acxusb_i_complete_tx() ++** Inputs: ++** urb -> pointer to USB request block ++** regs -> pointer to register-buffer for syscalls (see asm/ptrace.h) ++** ++** This function is invoked upon termination of a USB transfer. ++*/ ++static void ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) ++acxusb_i_complete_tx(struct urb *urb) ++#else ++acxusb_i_complete_tx(struct urb *urb, struct pt_regs *regs) ++#endif ++{ ++ acx_device_t *adev; ++ usb_tx_t *tx; ++ unsigned long flags; ++ int txnum; ++ ++ FN_ENTER; ++ ++ BUG_ON(!urb->context); ++ ++ tx = (usb_tx_t *)urb->context; ++ adev = tx->adev; ++ ++ txnum = tx - adev->usb_tx; ++ ++ acx_lock(adev, flags); ++ ++ /* ++ * If the iface isn't up, we don't have any right ++ * to play with them. The urb may get unlinked. ++ */ ++ if (unlikely(!(adev->dev_state_mask & ACX_STATE_IFACE_UP))) { ++ log(L_USBRXTX, "tx: device is down, not doing anything\n"); ++ goto end_unlock; ++ } ++ ++ log(L_USBRXTX, "RETURN TX (%d): status=%d size=%d\n", ++ txnum, urb->status, urb->actual_length); ++ ++ /* handle USB transfer errors */ ++ switch (urb->status) { ++ case 0: /* No error */ ++ break; ++ case -ESHUTDOWN: ++ goto end_unlock; ++ break; ++ case -ECONNRESET: ++ goto end_unlock; ++ break; ++ /* FIXME: real error-handling code here please */ ++ default: ++ printk(KERN_ERR "acx: tx error, urb status=%d\n", urb->status); ++ /* FIXME: real error-handling code here please */ ++ } ++ ++ /* free the URB and check for more data */ ++ tx->busy = 0; ++ adev->tx_free++; ++ if ((adev->tx_free >= TX_START_QUEUE) ++ && (adev->status == ACX_STATUS_4_ASSOCIATED) ++ && (acx_queue_stopped(adev->ndev)) ++ ) { ++ log(L_BUF, "tx: wake queue (%u free txbufs)\n", ++ adev->tx_free); ++ acx_wake_queue(adev->ndev, NULL); ++ } ++ ++end_unlock: ++ acx_unlock(adev, flags); ++/* end: */ ++ FN_EXIT0; ++} ++ ++ ++/*************************************************************** ++** acxusb_l_alloc_tx ++** Actually returns a usb_tx_t* ptr ++*/ ++tx_t* ++acxusb_l_alloc_tx(acx_device_t *adev) ++{ ++ usb_tx_t *tx; ++ unsigned head; ++ ++ FN_ENTER; ++ ++ head = adev->tx_head; ++ do { ++ head = (head + 1) % ACX_TX_URB_CNT; ++ if (!adev->usb_tx[head].busy) { ++ log(L_USBRXTX, "allocated tx %d\n", head); ++ tx = &adev->usb_tx[head]; ++ tx->busy = 1; ++ adev->tx_free--; ++ /* Keep a few free descs between head and tail of tx ring. ++ ** It is not absolutely needed, just feels safer */ ++ if (adev->tx_free < TX_STOP_QUEUE) { ++ log(L_BUF, "tx: stop queue " ++ "(%u free txbufs)\n", adev->tx_free); ++ acx_stop_queue(adev->ndev, NULL); ++ } ++ goto end; ++ } ++ } while (likely(head!=adev->tx_head)); ++ tx = NULL; ++ printk_ratelimited("acx: tx buffers full\n"); ++end: ++ adev->tx_head = head; ++ FN_EXIT0; ++ return (tx_t*)tx; ++} ++ ++ ++/*************************************************************** ++** Used if alloc_tx()'ed buffer needs to be cancelled without doing tx ++*/ ++void ++acxusb_l_dealloc_tx(tx_t *tx_opaque) ++{ ++ usb_tx_t* tx = (usb_tx_t*)tx_opaque; ++ tx->busy = 0; ++} ++ ++ ++/*************************************************************** ++*/ ++void* ++acxusb_l_get_txbuf(acx_device_t *adev, tx_t* tx_opaque) ++{ ++ usb_tx_t* tx = (usb_tx_t*)tx_opaque; ++ return &tx->bulkout.data; ++} ++ ++ ++/*************************************************************** ++** acxusb_l_tx_data ++** ++** Can be called from IRQ (rx -> (AP bridging or mgmt response) -> tx). ++** Can be called from acx_i_start_xmit (data frames from net core). ++*/ ++void ++acxusb_l_tx_data(acx_device_t *adev, tx_t* tx_opaque, int wlanpkt_len) ++{ ++ struct usb_device *usbdev; ++ struct urb* txurb; ++ usb_tx_t* tx; ++ usb_txbuffer_t* txbuf; ++ client_t *clt; ++ wlan_hdr_t* whdr; ++ unsigned int outpipe; ++ int ucode, txnum; ++ ++ FN_ENTER; ++ ++ tx = ((usb_tx_t *)tx_opaque); ++ txurb = tx->urb; ++ txbuf = &tx->bulkout; ++ whdr = (wlan_hdr_t *)txbuf->data; ++ txnum = tx - adev->usb_tx; ++ ++ log(L_DEBUG, "using buf#%d free=%d len=%d\n", ++ txnum, adev->tx_free, wlanpkt_len); ++ ++ switch (adev->mode) { ++ case ACX_MODE_0_ADHOC: ++ case ACX_MODE_3_AP: ++ clt = acx_l_sta_list_get(adev, whdr->a1); ++ break; ++ case ACX_MODE_2_STA: ++ clt = adev->ap_client; ++ break; ++ default: /* ACX_MODE_OFF, ACX_MODE_MONITOR */ ++ clt = NULL; ++ break; ++ } ++ ++ if (unlikely(clt && !clt->rate_cur)) { ++ printk("acx: driver bug! bad ratemask\n"); ++ goto end; ++ } ++ ++ /* fill the USB transfer header */ ++ txbuf->desc = cpu_to_le16(USB_TXBUF_TXDESC); ++ txbuf->mpdu_len = cpu_to_le16(wlanpkt_len); ++ txbuf->queue_index = 1; ++ if (clt) { ++ txbuf->rate = clt->rate_100; ++ txbuf->hostdata = (clt - adev->sta_list) | (clt->rate_cur << 16); ++ } else { ++ txbuf->rate = adev->rate_bcast100; ++ txbuf->hostdata = ((u16)-1) | (adev->rate_bcast << 16); ++ } ++ txbuf->ctrl1 = DESC_CTL_FIRSTFRAG; ++ if (1 == adev->preamble_cur) ++ SET_BIT(txbuf->ctrl1, DESC_CTL_SHORT_PREAMBLE); ++ txbuf->ctrl2 = 0; ++ txbuf->data_len = cpu_to_le16(wlanpkt_len); ++ ++ if (unlikely(acx_debug & L_DATA)) { ++ printk("dump of bulk out urb:\n"); ++ acx_dump_bytes(txbuf, wlanpkt_len + USB_TXBUF_HDRSIZE); ++ } ++ ++ if (unlikely(txurb->status == -EINPROGRESS)) { ++ printk("acx: trying to submit tx urb while already in progress\n"); ++ } ++ ++ /* now schedule the USB transfer */ ++ usbdev = adev->usbdev; ++ outpipe = usb_sndbulkpipe(usbdev, adev->bulkoutep); ++ ++ usb_fill_bulk_urb(txurb, usbdev, outpipe, ++ txbuf, /* dataptr */ ++ wlanpkt_len + USB_TXBUF_HDRSIZE, /* size */ ++ acxusb_i_complete_tx, /* handler */ ++ tx /* handler param */ ++ ); ++ ++ txurb->transfer_flags = URB_ASYNC_UNLINK|URB_ZERO_PACKET; ++ ucode = usb_submit_urb(txurb, GFP_ATOMIC); ++ log(L_USBRXTX, "SUBMIT TX (%d): outpipe=0x%X buf=%p txsize=%d " ++ "rate=%u errcode=%d\n", txnum, outpipe, txbuf, ++ wlanpkt_len + USB_TXBUF_HDRSIZE, txbuf->rate, ucode); ++ ++ if (unlikely(ucode)) { ++ printk(KERN_ERR "acx: submit_urb() error=%d txsize=%d\n", ++ ucode, wlanpkt_len + USB_TXBUF_HDRSIZE); ++ ++ /* on error, just mark the frame as done and update ++ ** the statistics ++ */ ++ adev->stats.tx_errors++; ++ tx->busy = 0; ++ adev->tx_free++; ++ /* needed? if (adev->tx_free > TX_START_QUEUE) acx_wake_queue(...) */ ++ } ++end: ++ FN_EXIT0; ++} ++ ++ ++/*********************************************************************** ++*/ ++static void ++acxusb_i_set_rx_mode(struct net_device *ndev) ++{ ++} ++ ++ ++/*********************************************************************** ++*/ ++#ifdef HAVE_TX_TIMEOUT ++static void ++acxusb_i_tx_timeout(struct net_device *ndev) ++{ ++ acx_device_t *adev = ndev2adev(ndev); ++ unsigned long flags; ++ int i; ++ ++ FN_ENTER; ++ ++ acx_lock(adev, flags); ++ /* unlink the URBs */ ++ for (i = 0; i < ACX_TX_URB_CNT; i++) { ++ acxusb_unlink_urb(adev->usb_tx[i].urb); ++ adev->usb_tx[i].busy = 0; ++ } ++ adev->tx_free = ACX_TX_URB_CNT; ++ /* TODO: stats update */ ++ acx_unlock(adev, flags); ++ ++ FN_EXIT0; ++} ++#endif ++ ++ ++/*********************************************************************** ++** init_module() ++** ++** This function is invoked upon loading of the kernel module. ++** It registers itself at the kernel's USB subsystem. ++** ++** Returns: Errorcode on failure, 0 on success ++*/ ++int __init ++acxusb_e_init_module(void) ++{ ++ log(L_INIT, "USB module " ACX_RELEASE " initialized, " ++ "probing for devices...\n"); ++ return usb_register(&acxusb_driver); ++} ++ ++ ++ ++/*********************************************************************** ++** cleanup_module() ++** ++** This function is invoked as last step of the module unloading. It simply ++** deregisters this module at the kernel's USB subsystem. ++*/ ++void __exit ++acxusb_e_cleanup_module() ++{ ++ usb_deregister(&acxusb_driver); ++} ++ ++ ++/*********************************************************************** ++** DEBUG STUFF ++*/ ++#if ACX_DEBUG ++ ++#ifdef UNUSED ++static void ++dump_device(struct usb_device *usbdev) ++{ ++ int i; ++ struct usb_config_descriptor *cd; ++ ++ printk("acx device dump:\n"); ++ printk(" devnum: %d\n", usbdev->devnum); ++ printk(" speed: %d\n", usbdev->speed); ++ printk(" tt: 0x%X\n", (unsigned int)(usbdev->tt)); ++ printk(" ttport: %d\n", (unsigned int)(usbdev->ttport)); ++ printk(" toggle[0]: 0x%X toggle[1]: 0x%X\n", (unsigned int)(usbdev->toggle[0]), (unsigned int)(usbdev->toggle[1])); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11) ++ /* This saw a change after 2.6.10 */ ++ printk(" ep_in wMaxPacketSize: "); ++ for (i = 0; i < 16; ++i) ++ if (usbdev->ep_in[i] != NULL) ++ printk("%d:%d ", i, usbdev->ep_in[i]->desc.wMaxPacketSize); ++ printk("\n"); ++ printk(" ep_out wMaxPacketSize: "); ++ for (i = 0; i < VEC_SIZE(usbdev->ep_out); ++i) ++ if (usbdev->ep_out[i] != NULL) ++ printk("%d:%d ", i, usbdev->ep_out[i]->desc.wMaxPacketSize); ++ printk("\n"); ++#else ++ printk(" epmaxpacketin: "); ++ for (i = 0; i < 16; i++) ++ printk("%d ", usbdev->epmaxpacketin[i]); ++ printk("\n"); ++ printk(" epmaxpacketout: "); ++ for (i = 0; i < 16; i++) ++ printk("%d ", usbdev->epmaxpacketout[i]); ++ printk("\n"); ++#endif ++ printk(" parent: 0x%X\n", (unsigned int)usbdev->parent); ++ printk(" bus: 0x%X\n", (unsigned int)usbdev->bus); ++#ifdef NO_DATATYPE ++ printk(" configs: "); ++ for (i = 0; i < usbdev->descriptor.bNumConfigurations; i++) ++ printk("0x%X ", usbdev->config[i]); ++ printk("\n"); ++#endif ++ printk(" actconfig: %p\n", usbdev->actconfig); ++ dump_device_descriptor(&usbdev->descriptor); ++ ++ cd = &usbdev->config->desc; ++ dump_config_descriptor(cd); ++} ++ ++ ++/*********************************************************************** ++*/ ++static void ++dump_config_descriptor(struct usb_config_descriptor *cd) ++{ ++ printk("Configuration Descriptor:\n"); ++ if (!cd) { ++ printk("NULL\n"); ++ return; ++ } ++ printk(" bLength: %d (0x%X)\n", cd->bLength, cd->bLength); ++ printk(" bDescriptorType: %d (0x%X)\n", cd->bDescriptorType, cd->bDescriptorType); ++ printk(" bNumInterfaces: %d (0x%X)\n", cd->bNumInterfaces, cd->bNumInterfaces); ++ printk(" bConfigurationValue: %d (0x%X)\n", cd->bConfigurationValue, cd->bConfigurationValue); ++ printk(" iConfiguration: %d (0x%X)\n", cd->iConfiguration, cd->iConfiguration); ++ printk(" bmAttributes: %d (0x%X)\n", cd->bmAttributes, cd->bmAttributes); ++ /* printk(" MaxPower: %d (0x%X)\n", cd->bMaxPower, cd->bMaxPower); */ ++} ++ ++ ++static void ++dump_device_descriptor(struct usb_device_descriptor *dd) ++{ ++ printk("Device Descriptor:\n"); ++ if (!dd) { ++ printk("NULL\n"); ++ return; ++ } ++ printk(" bLength: %d (0x%X)\n", dd->bLength, dd->bLength); ++ printk(" bDescriptortype: %d (0x%X)\n", dd->bDescriptorType, dd->bDescriptorType); ++ printk(" bcdUSB: %d (0x%X)\n", dd->bcdUSB, dd->bcdUSB); ++ printk(" bDeviceClass: %d (0x%X)\n", dd->bDeviceClass, dd->bDeviceClass); ++ printk(" bDeviceSubClass: %d (0x%X)\n", dd->bDeviceSubClass, dd->bDeviceSubClass); ++ printk(" bDeviceProtocol: %d (0x%X)\n", dd->bDeviceProtocol, dd->bDeviceProtocol); ++ printk(" bMaxPacketSize0: %d (0x%X)\n", dd->bMaxPacketSize0, dd->bMaxPacketSize0); ++ printk(" idVendor: %d (0x%X)\n", dd->idVendor, dd->idVendor); ++ printk(" idProduct: %d (0x%X)\n", dd->idProduct, dd->idProduct); ++ printk(" bcdDevice: %d (0x%X)\n", dd->bcdDevice, dd->bcdDevice); ++ printk(" iManufacturer: %d (0x%X)\n", dd->iManufacturer, dd->iManufacturer); ++ printk(" iProduct: %d (0x%X)\n", dd->iProduct, dd->iProduct); ++ printk(" iSerialNumber: %d (0x%X)\n", dd->iSerialNumber, dd->iSerialNumber); ++ printk(" bNumConfigurations: %d (0x%X)\n", dd->bNumConfigurations, dd->bNumConfigurations); ++} ++#endif /* UNUSED */ ++ ++#endif /* ACX_DEBUG */ +Index: linux-2.6.23/drivers/net/wireless/acx/wlan.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/wlan.c 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,424 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++ ++/*********************************************************************** ++** This code is based on elements which are ++** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. ++** info@linux-wlan.com ++** http://www.linux-wlan.com ++*/ ++ ++#include ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 18) ++#include ++#endif ++#include ++#include ++#include ++#include ++ ++#include "acx.h" ++ ++ ++/*********************************************************************** ++*/ ++#define LOG_BAD_EID(hdr,len,ie_ptr) acx_log_bad_eid(hdr, len, ((wlan_ie_t*)ie_ptr)) ++ ++#define IE_EID(ie_ptr) (((wlan_ie_t*)(ie_ptr))->eid) ++#define IE_LEN(ie_ptr) (((wlan_ie_t*)(ie_ptr))->len) ++#define OFFSET(hdr,off) (WLAN_HDR_A3_DATAP(hdr) + (off)) ++ ++ ++/*********************************************************************** ++** wlan_mgmt_decode_XXX ++** ++** Given a complete frame in f->hdr, sets the pointers in f to ++** the areas that correspond to the parts of the frame. ++** ++** Assumptions: ++** 1) f->len and f->hdr are already set ++** 2) f->len is the length of the MAC header + data, the FCS ++** is NOT included ++** 3) all members except len and hdr are zero ++** Arguments: ++** f frame structure ++** ++** Returns: ++** nothing ++** ++** Side effects: ++** frame structure members are pointing at their ++** respective portions of the frame buffer. ++*/ ++void ++wlan_mgmt_decode_beacon(wlan_fr_beacon_t * f) ++{ ++ u8 *ie_ptr; ++ u8 *end = (u8*)f->hdr + f->len; ++ ++ f->type = WLAN_FSTYPE_BEACON; ++ ++ /*-- Fixed Fields ----*/ ++ f->ts = (u64 *) OFFSET(f->hdr, WLAN_BEACON_OFF_TS); ++ f->bcn_int = (u16 *) OFFSET(f->hdr, WLAN_BEACON_OFF_BCN_INT); ++ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_BEACON_OFF_CAPINFO); ++ ++ /*-- Information elements */ ++ ie_ptr = OFFSET(f->hdr, WLAN_BEACON_OFF_SSID); ++ while (ie_ptr < end) { ++ switch (IE_EID(ie_ptr)) { ++ case WLAN_EID_SSID: ++ f->ssid = (wlan_ie_ssid_t *) ie_ptr; ++ break; ++ case WLAN_EID_SUPP_RATES: ++ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; ++ break; ++ case WLAN_EID_EXT_RATES: ++ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; ++ break; ++ case WLAN_EID_FH_PARMS: ++ f->fh_parms = (wlan_ie_fh_parms_t *) ie_ptr; ++ break; ++ case WLAN_EID_DS_PARMS: ++ f->ds_parms = (wlan_ie_ds_parms_t *) ie_ptr; ++ break; ++ case WLAN_EID_CF_PARMS: ++ f->cf_parms = (wlan_ie_cf_parms_t *) ie_ptr; ++ break; ++ case WLAN_EID_IBSS_PARMS: ++ f->ibss_parms = (wlan_ie_ibss_parms_t *) ie_ptr; ++ break; ++ case WLAN_EID_TIM: ++ f->tim = (wlan_ie_tim_t *) ie_ptr; ++ break; ++ case WLAN_EID_ERP_INFO: ++ f->erp = (wlan_ie_erp_t *) ie_ptr; ++ break; ++ ++ case WLAN_EID_COUNTRY: ++ /* was seen: 07 06 47 42 20 01 0D 14 */ ++ case WLAN_EID_PWR_CONSTRAINT: ++ /* was seen by Ashwin Mansinghka from ++ Atheros-based PCI card in AP mode using madwifi drivers: */ ++ /* 20 01 00 */ ++ case WLAN_EID_NONERP: ++ /* was seen from WRT54GS with OpenWrt: 2F 01 07 */ ++ case WLAN_EID_UNKNOWN128: ++ /* was seen by Jacek Jablonski from Orinoco AP */ ++ /* 80 06 00 60 1D 2C 3B 00 */ ++ case WLAN_EID_UNKNOWN133: ++ /* was seen by David Bronaugh from ???? */ ++ /* 85 1E 00 00 84 12 07 00 FF 00 11 00 61 70 63 31 */ ++ /* 63 73 72 30 34 32 00 00 00 00 00 00 00 00 00 25 */ ++ case WLAN_EID_UNKNOWN223: ++ /* was seen by Carlos Martin from ???? */ ++ /* DF 20 01 1E 04 00 00 00 06 63 09 02 FF 0F 30 30 */ ++ /* 30 42 36 42 33 34 30 39 46 31 00 00 00 00 00 00 00 00 */ ++ case WLAN_EID_GENERIC: ++ /* WPA: hostap code: ++ if (pos[1] >= 4 && ++ pos[2] == 0x00 && pos[3] == 0x50 && ++ pos[4] == 0xf2 && pos[5] == 1) { ++ wpa = pos; ++ wpa_len = pos[1] + 2; ++ } ++ TI x4 mode: seen DD 04 08 00 28 00 ++ (08 00 28 is TI's OUI) ++ last byte is probably 0/1 - disabled/enabled ++ */ ++ case WLAN_EID_RSN: ++ /* hostap does something with it: ++ rsn = pos; ++ rsn_len = pos[1] + 2; ++ */ ++ break; ++ ++ default: ++ LOG_BAD_EID(f->hdr, f->len, ie_ptr); ++ break; ++ } ++ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); ++ } ++} ++ ++ ++#ifdef UNUSED ++void wlan_mgmt_decode_ibssatim(wlan_fr_ibssatim_t * f) ++{ ++ f->type = WLAN_FSTYPE_ATIM; ++ /*-- Fixed Fields ----*/ ++ /*-- Information elements */ ++} ++#endif /* UNUSED */ ++ ++void ++wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t * f) ++{ ++ f->type = WLAN_FSTYPE_DISASSOC; ++ ++ /*-- Fixed Fields ----*/ ++ f->reason = (u16 *) OFFSET(f->hdr, WLAN_DISASSOC_OFF_REASON); ++ ++ /*-- Information elements */ ++} ++ ++ ++void ++wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t * f) ++{ ++ u8 *ie_ptr; ++ u8 *end = (u8*)f->hdr + f->len; ++ ++ ++ f->type = WLAN_FSTYPE_ASSOCREQ; ++ ++ /*-- Fixed Fields ----*/ ++ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_CAP_INFO); ++ f->listen_int = (u16 *) OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_LISTEN_INT); ++ ++ /*-- Information elements */ ++ ie_ptr = OFFSET(f->hdr, WLAN_ASSOCREQ_OFF_SSID); ++ while (ie_ptr < end) { ++ switch (IE_EID(ie_ptr)) { ++ case WLAN_EID_SSID: ++ f->ssid = (wlan_ie_ssid_t *) ie_ptr; ++ break; ++ case WLAN_EID_SUPP_RATES: ++ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; ++ break; ++ case WLAN_EID_EXT_RATES: ++ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; ++ break; ++ default: ++ LOG_BAD_EID(f->hdr, f->len, ie_ptr); ++ break; ++ } ++ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); ++ } ++} ++ ++ ++void ++wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t * f) ++{ ++ f->type = WLAN_FSTYPE_ASSOCRESP; ++ ++ /*-- Fixed Fields ----*/ ++ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_CAP_INFO); ++ f->status = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_STATUS); ++ f->aid = (u16 *) OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_AID); ++ ++ /*-- Information elements */ ++ f->supp_rates = (wlan_ie_supp_rates_t *) ++ OFFSET(f->hdr, WLAN_ASSOCRESP_OFF_SUPP_RATES); ++} ++ ++ ++#ifdef UNUSED ++void ++wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t * f) ++{ ++ u8 *ie_ptr; ++ u8 *end = (u8*)f->hdr + f->len; ++ ++ f->type = WLAN_FSTYPE_REASSOCREQ; ++ ++ /*-- Fixed Fields ----*/ ++ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_CAP_INFO); ++ f->listen_int = (u16 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_LISTEN_INT); ++ f->curr_ap = (u8 *) OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_CURR_AP); ++ ++ /*-- Information elements */ ++ ie_ptr = OFFSET(f->hdr, WLAN_REASSOCREQ_OFF_SSID); ++ while (ie_ptr < end) { ++ switch (IE_EID(ie_ptr)) { ++ case WLAN_EID_SSID: ++ f->ssid = (wlan_ie_ssid_t *) ie_ptr; ++ break; ++ case WLAN_EID_SUPP_RATES: ++ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; ++ break; ++ case WLAN_EID_EXT_RATES: ++ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; ++ break; ++ default: ++ LOG_BAD_EID(f->hdr, f->len, ie_ptr); ++ break; ++ } ++ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); ++ } ++} ++ ++ ++void ++wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t * f) ++{ ++ f->type = WLAN_FSTYPE_REASSOCRESP; ++ ++ /*-- Fixed Fields ----*/ ++ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_CAP_INFO); ++ f->status = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_STATUS); ++ f->aid = (u16 *) OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_AID); ++ ++ /*-- Information elements */ ++ f->supp_rates = (wlan_ie_supp_rates_t *) ++ OFFSET(f->hdr, WLAN_REASSOCRESP_OFF_SUPP_RATES); ++} ++ ++ ++void ++wlan_mgmt_decode_probereq(wlan_fr_probereq_t * f) ++{ ++ u8 *ie_ptr; ++ u8 *end = (u8*)f->hdr + f->len; ++ ++ f->type = WLAN_FSTYPE_PROBEREQ; ++ ++ /*-- Fixed Fields ----*/ ++ ++ /*-- Information elements */ ++ ie_ptr = OFFSET(f->hdr, WLAN_PROBEREQ_OFF_SSID); ++ while (ie_ptr < end) { ++ switch (IE_EID(ie_ptr)) { ++ case WLAN_EID_SSID: ++ f->ssid = (wlan_ie_ssid_t *) ie_ptr; ++ break; ++ case WLAN_EID_SUPP_RATES: ++ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; ++ break; ++ case WLAN_EID_EXT_RATES: ++ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; ++ break; ++ default: ++ LOG_BAD_EID(f->hdr, f->len, ie_ptr); ++ break; ++ } ++ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); ++ } ++} ++#endif /* UNUSED */ ++ ++ ++/* TODO: decoding of beacon and proberesp can be merged (similar structure) */ ++void ++wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t * f) ++{ ++ u8 *ie_ptr; ++ u8 *end = (u8*)f->hdr + f->len; ++ ++ f->type = WLAN_FSTYPE_PROBERESP; ++ ++ /*-- Fixed Fields ----*/ ++ f->ts = (u64 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_TS); ++ f->bcn_int = (u16 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_BCN_INT); ++ f->cap_info = (u16 *) OFFSET(f->hdr, WLAN_PROBERESP_OFF_CAP_INFO); ++ ++ /*-- Information elements */ ++ ie_ptr = OFFSET(f->hdr, WLAN_PROBERESP_OFF_SSID); ++ while (ie_ptr < end) { ++ switch (IE_EID(ie_ptr)) { ++ case WLAN_EID_SSID: ++ f->ssid = (wlan_ie_ssid_t *) ie_ptr; ++ break; ++ case WLAN_EID_SUPP_RATES: ++ f->supp_rates = (wlan_ie_supp_rates_t *) ie_ptr; ++ break; ++ case WLAN_EID_EXT_RATES: ++ f->ext_rates = (wlan_ie_supp_rates_t *) ie_ptr; ++ break; ++ case WLAN_EID_FH_PARMS: ++ f->fh_parms = (wlan_ie_fh_parms_t *) ie_ptr; ++ break; ++ case WLAN_EID_DS_PARMS: ++ f->ds_parms = (wlan_ie_ds_parms_t *) ie_ptr; ++ break; ++ case WLAN_EID_CF_PARMS: ++ f->cf_parms = (wlan_ie_cf_parms_t *) ie_ptr; ++ break; ++ case WLAN_EID_IBSS_PARMS: ++ f->ibss_parms = (wlan_ie_ibss_parms_t *) ie_ptr; ++ break; ++#ifdef DONT_DO_IT_ADD_REAL_HANDLING_INSTEAD ++ case WLAN_EID_COUNTRY: ++ break; ++ ... ++#endif ++#ifdef SENT_HERE_BY_OPENWRT ++ /* should those be trapped or handled?? */ ++ case WLAN_EID_ERP_INFO: ++ break; ++ case WLAN_EID_NONERP: ++ break; ++ case WLAN_EID_GENERIC: ++ break; ++#endif ++ default: ++ LOG_BAD_EID(f->hdr, f->len, ie_ptr); ++ break; ++ } ++ ++ ie_ptr = ie_ptr + 2 + IE_LEN(ie_ptr); ++ } ++} ++ ++ ++void ++wlan_mgmt_decode_authen(wlan_fr_authen_t * f) ++{ ++ u8 *ie_ptr; ++ u8 *end = (u8*)f->hdr + f->len; ++ ++ f->type = WLAN_FSTYPE_AUTHEN; ++ ++ /*-- Fixed Fields ----*/ ++ f->auth_alg = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_AUTH_ALG); ++ f->auth_seq = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_AUTH_SEQ); ++ f->status = (u16 *) OFFSET(f->hdr, WLAN_AUTHEN_OFF_STATUS); ++ ++ /*-- Information elements */ ++ ie_ptr = OFFSET(f->hdr, WLAN_AUTHEN_OFF_CHALLENGE); ++ if ((ie_ptr < end) && (IE_EID(ie_ptr) == WLAN_EID_CHALLENGE)) { ++ f->challenge = (wlan_ie_challenge_t *) ie_ptr; ++ } ++} ++ ++ ++void ++wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t * f) ++{ ++ f->type = WLAN_FSTYPE_DEAUTHEN; ++ ++ /*-- Fixed Fields ----*/ ++ f->reason = (u16 *) OFFSET(f->hdr, WLAN_DEAUTHEN_OFF_REASON); ++ ++ /*-- Information elements */ ++} +Index: linux-2.6.23/drivers/net/wireless/acx/wlan_compat.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/wlan_compat.h 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,260 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++ ++/*********************************************************************** ++** This code is based on elements which are ++** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. ++** info@linux-wlan.com ++** http://www.linux-wlan.com ++*/ ++ ++/*=============================================================*/ ++/*------ Establish Platform Identity --------------------------*/ ++/*=============================================================*/ ++/* Key macros: */ ++/* WLAN_CPU_FAMILY */ ++#define WLAN_Ix86 1 ++#define WLAN_PPC 2 ++#define WLAN_Ix96 3 ++#define WLAN_ARM 4 ++#define WLAN_ALPHA 5 ++#define WLAN_MIPS 6 ++#define WLAN_HPPA 7 ++#define WLAN_SPARC 8 ++#define WLAN_SH 9 ++#define WLAN_x86_64 10 ++/* WLAN_CPU_CORE */ ++#define WLAN_I386CORE 1 ++#define WLAN_PPCCORE 2 ++#define WLAN_I296 3 ++#define WLAN_ARMCORE 4 ++#define WLAN_ALPHACORE 5 ++#define WLAN_MIPSCORE 6 ++#define WLAN_HPPACORE 7 ++/* WLAN_CPU_PART */ ++#define WLAN_I386PART 1 ++#define WLAN_MPC860 2 ++#define WLAN_MPC823 3 ++#define WLAN_I296SA 4 ++#define WLAN_PPCPART 5 ++#define WLAN_ARMPART 6 ++#define WLAN_ALPHAPART 7 ++#define WLAN_MIPSPART 8 ++#define WLAN_HPPAPART 9 ++/* WLAN_SYSARCH */ ++#define WLAN_PCAT 1 ++#define WLAN_MBX 2 ++#define WLAN_RPX 3 ++#define WLAN_LWARCH 4 ++#define WLAN_PMAC 5 ++#define WLAN_SKIFF 6 ++#define WLAN_BITSY 7 ++#define WLAN_ALPHAARCH 7 ++#define WLAN_MIPSARCH 9 ++#define WLAN_HPPAARCH 10 ++/* WLAN_HOSTIF (generally set on the command line, not detected) */ ++#define WLAN_PCMCIA 1 ++#define WLAN_ISA 2 ++#define WLAN_PCI 3 ++#define WLAN_USB 4 ++#define WLAN_PLX 5 ++ ++/* Note: the PLX HOSTIF above refers to some vendors implementations for */ ++/* PCI. It's a PLX chip that is a PCI to PCMCIA adapter, but it */ ++/* isn't a real PCMCIA host interface adapter providing all the */ ++/* card&socket services. */ ++ ++#ifdef __powerpc__ ++#ifndef __ppc__ ++#define __ppc__ ++#endif ++#endif ++ ++#if (defined(CONFIG_PPC) || defined(CONFIG_8xx)) ++#ifndef __ppc__ ++#define __ppc__ ++#endif ++#endif ++ ++#if defined(__x86_64__) ++ #define WLAN_CPU_FAMILY WLAN_x86_64 ++ #define WLAN_SYSARCH WLAN_PCAT ++#elif defined(__i386__) || defined(__i486__) || defined(__i586__) || defined(__i686__) ++ #define WLAN_CPU_FAMILY WLAN_Ix86 ++ #define WLAN_CPU_CORE WLAN_I386CORE ++ #define WLAN_CPU_PART WLAN_I386PART ++ #define WLAN_SYSARCH WLAN_PCAT ++#elif defined(__ppc__) ++ #define WLAN_CPU_FAMILY WLAN_PPC ++ #define WLAN_CPU_CORE WLAN_PPCCORE ++ #if defined(CONFIG_MBX) ++ #define WLAN_CPU_PART WLAN_MPC860 ++ #define WLAN_SYSARCH WLAN_MBX ++ #elif defined(CONFIG_RPXLITE) ++ #define WLAN_CPU_PART WLAN_MPC823 ++ #define WLAN_SYSARCH WLAN_RPX ++ #elif defined(CONFIG_RPXCLASSIC) ++ #define WLAN_CPU_PART WLAN_MPC860 ++ #define WLAN_SYSARCH WLAN_RPX ++ #else ++ #define WLAN_CPU_PART WLAN_PPCPART ++ #define WLAN_SYSARCH WLAN_PMAC ++ #endif ++#elif defined(__arm__) ++ #define WLAN_CPU_FAMILY WLAN_ARM ++ #define WLAN_CPU_CORE WLAN_ARMCORE ++ #define WLAN_CPU_PART WLAN_ARM_PART ++ #define WLAN_SYSARCH WLAN_SKIFF ++#elif defined(__alpha__) ++ #define WLAN_CPU_FAMILY WLAN_ALPHA ++ #define WLAN_CPU_CORE WLAN_ALPHACORE ++ #define WLAN_CPU_PART WLAN_ALPHAPART ++ #define WLAN_SYSARCH WLAN_ALPHAARCH ++#elif defined(__mips__) ++ #define WLAN_CPU_FAMILY WLAN_MIPS ++ #define WLAN_CPU_CORE WLAN_MIPSCORE ++ #define WLAN_CPU_PART WLAN_MIPSPART ++ #define WLAN_SYSARCH WLAN_MIPSARCH ++#elif defined(__hppa__) ++ #define WLAN_CPU_FAMILY WLAN_HPPA ++ #define WLAN_CPU_CORE WLAN_HPPACORE ++ #define WLAN_CPU_PART WLAN_HPPAPART ++ #define WLAN_SYSARCH WLAN_HPPAARCH ++#elif defined(__sparc__) ++ #define WLAN_CPU_FAMILY WLAN_SPARC ++ #define WLAN_SYSARCH WLAN_SPARC ++#elif defined(__sh__) ++ #define WLAN_CPU_FAMILY WLAN_SH ++ #define WLAN_SYSARCH WLAN_SHARCH ++ #ifndef __LITTLE_ENDIAN__ ++ #define __LITTLE_ENDIAN__ ++ #endif ++#else ++ #error "No CPU identified!" ++#endif ++ ++/* ++ Some big endian machines implicitly do all I/O in little endian mode. ++ ++ In particular: ++ Linux/PPC on PowerMacs (PCI) ++ Arm/Intel Xscale (PCI) ++ ++ This may also affect PLX boards and other BE &| PPC platforms; ++ as new ones are discovered, add them below. ++*/ ++ ++#if ((WLAN_SYSARCH == WLAN_SKIFF) || (WLAN_SYSARCH == WLAN_PMAC)) ++#define REVERSE_ENDIAN ++#endif ++ ++/*=============================================================*/ ++/*------ Hardware Portability Macros --------------------------*/ ++/*=============================================================*/ ++#if (WLAN_CPU_FAMILY == WLAN_PPC) ++#define wlan_inw(a) in_be16((unsigned short *)((a)+_IO_BASE)) ++#define wlan_inw_le16_to_cpu(a) inw((a)) ++#define wlan_outw(v,a) out_be16((unsigned short *)((a)+_IO_BASE), (v)) ++#define wlan_outw_cpu_to_le16(v,a) outw((v),(a)) ++#else ++#define wlan_inw(a) inw((a)) ++#define wlan_inw_le16_to_cpu(a) __cpu_to_le16(inw((a))) ++#define wlan_outw(v,a) outw((v),(a)) ++#define wlan_outw_cpu_to_le16(v,a) outw(__cpu_to_le16((v)),(a)) ++#endif ++ ++/*=============================================================*/ ++/*------ Bit settings -----------------------------------------*/ ++/*=============================================================*/ ++#define ieee2host16(n) __le16_to_cpu(n) ++#define ieee2host32(n) __le32_to_cpu(n) ++#define host2ieee16(n) __cpu_to_le16(n) ++#define host2ieee32(n) __cpu_to_le32(n) ++ ++/* for constants */ ++#ifdef __LITTLE_ENDIAN ++ #define IEEE16(a,n) a = n, a##i = n, ++#else ++ #ifdef __BIG_ENDIAN ++ /* shifts would produce gcc warnings. Oh well... */ ++ #define IEEE16(a,n) a = n, a##i = ((n&0xff)*256 + ((n&0xff00)/256)), ++ #else ++ #error give me endianness or give me death ++ #endif ++#endif ++ ++/*=============================================================*/ ++/*------ Compiler Portability Macros --------------------------*/ ++/*=============================================================*/ ++#define WLAN_PACKED __attribute__ ((packed)) ++ ++/* Interrupt handler backwards compatibility stuff */ ++#ifndef IRQ_NONE ++#define IRQ_NONE ++#define IRQ_HANDLED ++typedef void irqreturn_t; ++#endif ++ ++#ifndef ARPHRD_IEEE80211_PRISM ++#define ARPHRD_IEEE80211_PRISM 802 ++#endif ++ ++#define ETH_P_80211_RAW (ETH_P_ECONET + 1) ++ ++/*============================================================================* ++ * Constants * ++ *============================================================================*/ ++#define WLAN_IEEE_OUI_LEN 3 ++ ++/*============================================================================* ++ * Types * ++ *============================================================================*/ ++ ++/* local ether header type */ ++typedef struct wlan_ethhdr { ++ u8 daddr[ETH_ALEN]; ++ u8 saddr[ETH_ALEN]; ++ u16 type; ++} WLAN_PACKED wlan_ethhdr_t; ++ ++/* local llc header type */ ++typedef struct wlan_llc { ++ u8 dsap; ++ u8 ssap; ++ u8 ctl; ++} WLAN_PACKED wlan_llc_t; ++ ++/* local snap header type */ ++typedef struct wlan_snap { ++ u8 oui[WLAN_IEEE_OUI_LEN]; ++ u16 type; ++} WLAN_PACKED wlan_snap_t; +Index: linux-2.6.23/drivers/net/wireless/acx/wlan_hdr.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/wlan_hdr.h 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,497 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++ ++/*********************************************************************** ++** This code is based on elements which are ++** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. ++** info@linux-wlan.com ++** http://www.linux-wlan.com ++*/ ++ ++/* mini-doc ++ ++Here are all 11b/11g/11a rates and modulations: ++ ++ 11b 11g 11a ++ --- --- --- ++ 1 |B |B | ++ 2 |Q |Q | ++ 5.5|Cp |C p| ++ 6 | |Od |O ++ 9 | |od |o ++11 |Cp |C p| ++12 | |Od |O ++18 | |od |o ++22 | | p| ++24 | |Od |O ++33 | | p| ++36 | |od |o ++48 | |od |o ++54 | |od |o ++ ++Mandatory: ++ B - DBPSK (Differential Binary Phase Shift Keying) ++ Q - DQPSK (Differential Quaternary Phase Shift Keying) ++ C - CCK (Complementary Code Keying, a form of DSSS ++ (Direct Sequence Spread Spectrum) modulation) ++ O - OFDM (Orthogonal Frequency Division Multiplexing) ++Optional: ++ o - OFDM ++ d - CCK-OFDM (also known as DSSS-OFDM) ++ p - PBCC (Packet Binary Convolutional Coding) ++ ++The term CCK-OFDM may be used interchangeably with DSSS-OFDM ++(the IEEE 802.11g-2003 standard uses the latter terminology). ++In the CCK-OFDM, the PLCP header of the frame uses the CCK form of DSSS, ++while the PLCP payload (the MAC frame) is modulated using OFDM. ++ ++Basically, you must use CCK-OFDM if you have mixed 11b/11g environment, ++or else (pure OFDM) 11b equipment may not realize that AP ++is sending a packet and start sending its own one. ++Sadly, looks like acx111 does not support CCK-OFDM, only pure OFDM. ++ ++Re PBCC: avoid using it. It makes sense only if you have ++TI "11b+" hardware. You _must_ use PBCC in order to reach 22Mbps on it. ++ ++Preambles: ++ ++Long preamble (at 1Mbit rate, takes 144 us): ++ 16 bytes ones ++ 2 bytes 0xF3A0 (lsb sent first) ++PLCP header follows (at 1Mbit also): ++ 1 byte Signal: speed, in 0.1Mbit units, except for: ++ 33Mbit: 33 (instead of 330 - doesn't fit in octet) ++ all CCK-OFDM rates: 30 ++ 1 byte Service ++ 0,1,4: reserved ++ 2: 1=locked clock ++ 3: 1=PBCC ++ 5: Length Extension (PBCC 22,33Mbit (11g only)) <- ++ 6: Length Extension (PBCC 22,33Mbit (11g only)) <- BLACK MAGIC HERE ++ 7: Length Extension <- ++ 2 bytes Length (time needed to tx this frame) ++ a) 5.5 Mbit/s CCK ++ Length = octets*8/5.5, rounded up to integer ++ b) 11 Mbit/s CCK ++ Length = octets*8/11, rounded up to integer ++ Service bit 7: ++ 0 = rounding took less than 8/11 ++ 1 = rounding took more than or equal to 8/11 ++ c) 5.5 Mbit/s PBCC ++ Length = (octets+1)*8/5.5, rounded up to integer ++ d) 11 Mbit/s PBCC ++ Length = (octets+1)*8/11, rounded up to integer ++ Service bit 7: ++ 0 = rounding took less than 8/11 ++ 1 = rounding took more than or equal to 8/11 ++ e) 22 Mbit/s PBCC ++ Length = (octets+1)*8/22, rounded up to integer ++ Service bits 6,7: ++ 00 = rounding took less than 8/22ths ++ 01 = rounding took 8/22...15/22ths ++ 10 = rounding took 16/22ths or more. ++ f) 33 Mbit/s PBCC ++ Length = (octets+1)*8/33, rounded up to integer ++ Service bits 5,6,7: ++ 000 rounding took less than 8/33 ++ 001 rounding took 8/33...15/33 ++ 010 rounding took 16/33...23/33 ++ 011 rounding took 24/33...31/33 ++ 100 rounding took 32/33 or more ++ 2 bytes CRC ++ ++PSDU follows (up to 2346 bytes at selected rate) ++ ++While Signal value alone is not enough to determine rate and modulation, ++Signal+Service is always sufficient. ++ ++Short preamble (at 1Mbit rate, takes 72 us): ++ 7 bytes zeroes ++ 2 bytes 0x05CF (lsb sent first) ++PLCP header follows *at 2Mbit/s*. Format is the same as in long preamble. ++PSDU follows (up to 2346 bytes at selected rate) ++ ++OFDM preamble is completely different, uses OFDM ++modulation from the start and thus easily identifiable. ++Not shown here. ++*/ ++ ++ ++/*********************************************************************** ++** Constants ++*/ ++ ++#define WLAN_HDR_A3_LEN 24 ++#define WLAN_HDR_A4_LEN 30 ++/* IV structure: ++** 3 bytes: Initialization Vector (24 bits) ++** 1 byte: 0..5: padding, must be 0; 6..7: key selector (0-3) ++*/ ++#define WLAN_WEP_IV_LEN 4 ++/* 802.11 says 2312 but looks like 2312 is a max size of _WEPed data_ */ ++#define WLAN_DATA_MAXLEN 2304 ++#define WLAN_WEP_ICV_LEN 4 ++#define WLAN_FCS_LEN 4 ++#define WLAN_A3FR_MAXLEN (WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN) ++#define WLAN_A4FR_MAXLEN (WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN) ++#define WLAN_A3FR_MAXLEN_FCS (WLAN_HDR_A3_LEN + WLAN_DATA_MAXLEN + 4) ++#define WLAN_A4FR_MAXLEN_FCS (WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + 4) ++#define WLAN_A3FR_MAXLEN_WEP (WLAN_A3FR_MAXLEN + 8) ++#define WLAN_A4FR_MAXLEN_WEP (WLAN_A4FR_MAXLEN + 8) ++#define WLAN_A3FR_MAXLEN_WEP_FCS (WLAN_A3FR_MAXLEN_FCS + 8) ++#define WLAN_A4FR_MAXLEN_WEP_FCS (WLAN_A4FR_MAXLEN_FCS + 8) ++ ++#define WLAN_BSS_TS_LEN 8 ++#define WLAN_SSID_MAXLEN 32 ++#define WLAN_BEACON_FR_MAXLEN (WLAN_HDR_A3_LEN + 334) ++#define WLAN_ATIM_FR_MAXLEN (WLAN_HDR_A3_LEN + 0) ++#define WLAN_DISASSOC_FR_MAXLEN (WLAN_HDR_A3_LEN + 2) ++#define WLAN_ASSOCREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 48) ++#define WLAN_ASSOCRESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 16) ++#define WLAN_REASSOCREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 54) ++#define WLAN_REASSOCRESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 16) ++#define WLAN_PROBEREQ_FR_MAXLEN (WLAN_HDR_A3_LEN + 44) ++#define WLAN_PROBERESP_FR_MAXLEN (WLAN_HDR_A3_LEN + 78) ++#define WLAN_AUTHEN_FR_MAXLEN (WLAN_HDR_A3_LEN + 261) ++#define WLAN_DEAUTHEN_FR_MAXLEN (WLAN_HDR_A3_LEN + 2) ++#define WLAN_CHALLENGE_IE_LEN 130 ++#define WLAN_CHALLENGE_LEN 128 ++#define WLAN_WEP_MAXKEYLEN 13 ++#define WLAN_WEP_NKEYS 4 ++ ++/*--- Frame Control Field -------------------------------------*/ ++/* Frame Types */ ++#define WLAN_FTYPE_MGMT 0x00 ++#define WLAN_FTYPE_CTL 0x01 ++#define WLAN_FTYPE_DATA 0x02 ++ ++/* Frame subtypes */ ++/* Management */ ++#define WLAN_FSTYPE_ASSOCREQ 0x00 ++#define WLAN_FSTYPE_ASSOCRESP 0x01 ++#define WLAN_FSTYPE_REASSOCREQ 0x02 ++#define WLAN_FSTYPE_REASSOCRESP 0x03 ++#define WLAN_FSTYPE_PROBEREQ 0x04 ++#define WLAN_FSTYPE_PROBERESP 0x05 ++#define WLAN_FSTYPE_BEACON 0x08 ++#define WLAN_FSTYPE_ATIM 0x09 ++#define WLAN_FSTYPE_DISASSOC 0x0a ++#define WLAN_FSTYPE_AUTHEN 0x0b ++#define WLAN_FSTYPE_DEAUTHEN 0x0c ++ ++/* Control */ ++#define WLAN_FSTYPE_PSPOLL 0x0a ++#define WLAN_FSTYPE_RTS 0x0b ++#define WLAN_FSTYPE_CTS 0x0c ++#define WLAN_FSTYPE_ACK 0x0d ++#define WLAN_FSTYPE_CFEND 0x0e ++#define WLAN_FSTYPE_CFENDCFACK 0x0f ++ ++/* Data */ ++#define WLAN_FSTYPE_DATAONLY 0x00 ++#define WLAN_FSTYPE_DATA_CFACK 0x01 ++#define WLAN_FSTYPE_DATA_CFPOLL 0x02 ++#define WLAN_FSTYPE_DATA_CFACK_CFPOLL 0x03 ++#define WLAN_FSTYPE_NULL 0x04 ++#define WLAN_FSTYPE_CFACK 0x05 ++#define WLAN_FSTYPE_CFPOLL 0x06 ++#define WLAN_FSTYPE_CFACK_CFPOLL 0x07 ++ ++/*--- FC Constants v. 2.0 ------------------------------------*/ ++/* Each constant is defined twice: WF_CONST is in host */ ++/* byteorder, WF_CONSTi is in ieee byteorder. */ ++/* Usage: */ ++/* printf("the frame subtype is %X", WF_FC_FTYPEi & rx.fc); */ ++/* tx.fc = WF_FTYPE_CTLi | WF_FSTYPE_RTSi; */ ++/*------------------------------------------------------------*/ ++ ++enum { ++/*--- Frame Control Field -------------------------------------*/ ++/* Protocol version: always 0 for current 802.11 standards */ ++IEEE16(WF_FC_PVER, 0x0003) ++IEEE16(WF_FC_FTYPE, 0x000c) ++IEEE16(WF_FC_FSTYPE, 0x00f0) ++IEEE16(WF_FC_TODS, 0x0100) ++IEEE16(WF_FC_FROMDS, 0x0200) ++IEEE16(WF_FC_FROMTODS, 0x0300) ++IEEE16(WF_FC_MOREFRAG, 0x0400) ++IEEE16(WF_FC_RETRY, 0x0800) ++/* Indicates PS mode in which STA will be after successful completion ++** of current frame exchange sequence. Always 0 for AP frames */ ++IEEE16(WF_FC_PWRMGT, 0x1000) ++/* What MoreData=1 means: ++** From AP to STA in PS mode: don't sleep yet, I have more frames for you ++** From Contention-Free (CF) Pollable STA in response to a CF-Poll: ++** STA has buffered frames for transmission in response to next CF-Poll ++** Bcast/mcast frames transmitted from AP: ++** when additional bcast/mcast frames remain to be transmitted by AP ++** during this beacon interval ++** In all other cases MoreData=0 */ ++IEEE16(WF_FC_MOREDATA, 0x2000) ++IEEE16(WF_FC_ISWEP, 0x4000) ++IEEE16(WF_FC_ORDER, 0x8000) ++ ++/* Frame Types */ ++IEEE16(WF_FTYPE_MGMT, 0x00) ++IEEE16(WF_FTYPE_CTL, 0x04) ++IEEE16(WF_FTYPE_DATA, 0x08) ++ ++/* Frame subtypes */ ++/* Management */ ++IEEE16(WF_FSTYPE_ASSOCREQ, 0x00) ++IEEE16(WF_FSTYPE_ASSOCRESP, 0x10) ++IEEE16(WF_FSTYPE_REASSOCREQ, 0x20) ++IEEE16(WF_FSTYPE_REASSOCRESP, 0x30) ++IEEE16(WF_FSTYPE_PROBEREQ, 0x40) ++IEEE16(WF_FSTYPE_PROBERESP, 0x50) ++IEEE16(WF_FSTYPE_BEACON, 0x80) ++IEEE16(WF_FSTYPE_ATIM, 0x90) ++IEEE16(WF_FSTYPE_DISASSOC, 0xa0) ++IEEE16(WF_FSTYPE_AUTHEN, 0xb0) ++IEEE16(WF_FSTYPE_DEAUTHEN, 0xc0) ++ ++/* Control */ ++IEEE16(WF_FSTYPE_PSPOLL, 0xa0) ++IEEE16(WF_FSTYPE_RTS, 0xb0) ++IEEE16(WF_FSTYPE_CTS, 0xc0) ++IEEE16(WF_FSTYPE_ACK, 0xd0) ++IEEE16(WF_FSTYPE_CFEND, 0xe0) ++IEEE16(WF_FSTYPE_CFENDCFACK, 0xf0) ++ ++/* Data */ ++IEEE16(WF_FSTYPE_DATAONLY, 0x00) ++IEEE16(WF_FSTYPE_DATA_CFACK, 0x10) ++IEEE16(WF_FSTYPE_DATA_CFPOLL, 0x20) ++IEEE16(WF_FSTYPE_DATA_CFACK_CFPOLL, 0x30) ++IEEE16(WF_FSTYPE_NULL, 0x40) ++IEEE16(WF_FSTYPE_CFACK, 0x50) ++IEEE16(WF_FSTYPE_CFPOLL, 0x60) ++IEEE16(WF_FSTYPE_CFACK_CFPOLL, 0x70) ++}; ++ ++ ++/*********************************************************************** ++** Macros ++*/ ++ ++/*--- Duration Macros ----------------------------------------*/ ++/* Macros to get/set the bitfields of the Duration Field */ ++/* - the duration value is only valid when bit15 is zero */ ++/* - the firmware handles these values, so I'm not going */ ++/* to use these macros right now. */ ++/*------------------------------------------------------------*/ ++ ++/*--- Sequence Control Macros -------------------------------*/ ++/* Macros to get/set the bitfields of the Sequence Control */ ++/* Field. */ ++/*------------------------------------------------------------*/ ++#define WLAN_GET_SEQ_FRGNUM(n) ((u16)(n) & 0x000f) ++#define WLAN_GET_SEQ_SEQNUM(n) (((u16)(n) & 0xfff0) >> 4) ++ ++/*--- Data ptr macro -----------------------------------------*/ ++/* Creates a u8* to the data portion of a frame */ ++/* Assumes you're passing in a ptr to the beginning of the hdr*/ ++/*------------------------------------------------------------*/ ++#define WLAN_HDR_A3_DATAP(p) (((u8*)(p)) + WLAN_HDR_A3_LEN) ++#define WLAN_HDR_A4_DATAP(p) (((u8*)(p)) + WLAN_HDR_A4_LEN) ++ ++ ++/*********************************************************************** ++** Types ++*/ ++ ++/* 802.11 header type ++** ++** Note the following: ++** a1 *always* is receiver's mac or bcast/mcast ++** a2 *always* is transmitter's mac, if a2 exists ++** seq: [0:3] frag#, [4:15] seq# - used for dup detection ++** (dups from retries have same seq#) */ ++typedef struct wlan_hdr { ++ u16 fc; ++ u16 dur; ++ u8 a1[ETH_ALEN]; ++ u8 a2[ETH_ALEN]; ++ u8 a3[ETH_ALEN]; ++ u16 seq; ++ u8 a4[ETH_ALEN]; ++} WLAN_PACKED wlan_hdr_t; ++ ++/* Separate structs for use if frame type is known */ ++typedef struct wlan_hdr_a3 { ++ u16 fc; ++ u16 dur; ++ u8 a1[ETH_ALEN]; ++ u8 a2[ETH_ALEN]; ++ u8 a3[ETH_ALEN]; ++ u16 seq; ++} WLAN_PACKED wlan_hdr_a3_t; ++ ++typedef struct wlan_hdr_mgmt { ++ u16 fc; ++ u16 dur; ++ u8 da[ETH_ALEN]; ++ u8 sa[ETH_ALEN]; ++ u8 bssid[ETH_ALEN]; ++ u16 seq; ++} WLAN_PACKED wlan_hdr_mgmt_t; ++ ++#ifdef NOT_NEEDED_YET ++typedef struct { /* ad-hoc peer->peer (to/from DS = 0/0) */ ++ u16 fc; ++ u16 dur; ++ u8 da[ETH_ALEN]; ++ u8 sa[ETH_ALEN]; ++ u8 bssid[ETH_ALEN]; ++ u16 seq; ++} WLAN_PACKED ibss; ++typedef struct { /* ap->sta (to/from DS = 0/1) */ ++ u16 fc; ++ u16 dur; ++ u8 da[ETH_ALEN]; ++ u8 bssid[ETH_ALEN]; ++ u8 sa[ETH_ALEN]; ++ u16 seq; ++} WLAN_PACKED fromap; ++typedef struct { /* sta->ap (to/from DS = 1/0) */ ++ u16 fc; ++ u16 dur; ++ u8 bssid[ETH_ALEN]; ++ u8 sa[ETH_ALEN]; ++ u8 da[ETH_ALEN]; ++ u16 seq; ++} WLAN_PACKED toap; ++typedef struct { /* wds->wds (to/from DS = 1/1), the only 4addr pkt */ ++ u16 fc; ++ u16 dur; ++ u8 ra[ETH_ALEN]; ++ u8 ta[ETH_ALEN]; ++ u8 da[ETH_ALEN]; ++ u16 seq; ++ u8 sa[ETH_ALEN]; ++} WLAN_PACKED wds; ++typedef struct { /* all management packets */ ++ u16 fc; ++ u16 dur; ++ u8 da[ETH_ALEN]; ++ u8 sa[ETH_ALEN]; ++ u8 bssid[ETH_ALEN]; ++ u16 seq; ++} WLAN_PACKED mgmt; ++typedef struct { /* has no body, just a FCS */ ++ u16 fc; ++ u16 dur; ++ u8 ra[ETH_ALEN]; ++ u8 ta[ETH_ALEN]; ++} WLAN_PACKED rts; ++typedef struct { /* has no body, just a FCS */ ++ u16 fc; ++ u16 dur; ++ u8 ra[ETH_ALEN]; ++} WLAN_PACKED cts; ++typedef struct { /* has no body, just a FCS */ ++ u16 fc; ++ u16 dur; ++ u8 ra[ETH_ALEN]; ++} WLAN_PACKED ack; ++typedef struct { /* has no body, just a FCS */ ++ u16 fc; ++ /* NB: this one holds Assoc ID in dur field: */ ++ u16 aid; ++ u8 bssid[ETH_ALEN]; ++ u8 ta[ETH_ALEN]; ++} WLAN_PACKED pspoll; ++typedef struct { /* has no body, just a FCS */ ++ u16 fc; ++ u16 dur; ++ u8 ra[ETH_ALEN]; ++ u8 bssid[ETH_ALEN]; ++} WLAN_PACKED cfend; ++typedef struct { /* has no body, just a FCS */ ++ u16 fc; ++ u16 dur; ++ u8 ra[ETH_ALEN]; ++ u8 bssid[ETH_ALEN]; ++} WLAN_PACKED cfendcfack; ++#endif ++ ++/* Prism header emulation (monitor mode) */ ++typedef struct wlanitem_u32 { ++ u32 did; ++ u16 status; ++ u16 len; ++ u32 data; ++} WLAN_PACKED wlanitem_u32_t; ++#define WLANITEM_STATUS_data_ok 0 ++#define WLANITEM_STATUS_no_value 1 ++#define WLANITEM_STATUS_invalid_itemname 2 ++#define WLANITEM_STATUS_invalid_itemdata 3 ++#define WLANITEM_STATUS_missing_itemdata 4 ++#define WLANITEM_STATUS_incomplete_itemdata 5 ++#define WLANITEM_STATUS_invalid_msg_did 6 ++#define WLANITEM_STATUS_invalid_mib_did 7 ++#define WLANITEM_STATUS_missing_conv_func 8 ++#define WLANITEM_STATUS_string_too_long 9 ++#define WLANITEM_STATUS_data_out_of_range 10 ++#define WLANITEM_STATUS_string_too_short 11 ++#define WLANITEM_STATUS_missing_valid_func 12 ++#define WLANITEM_STATUS_unknown 13 ++#define WLANITEM_STATUS_invalid_did 14 ++#define WLANITEM_STATUS_missing_print_func 15 ++ ++#define WLAN_DEVNAMELEN_MAX 16 ++typedef struct wlansniffrm { ++ u32 msgcode; ++ u32 msglen; ++ u8 devname[WLAN_DEVNAMELEN_MAX]; ++ wlanitem_u32_t hosttime; ++ wlanitem_u32_t mactime; ++ wlanitem_u32_t channel; ++ wlanitem_u32_t rssi; ++ wlanitem_u32_t sq; ++ wlanitem_u32_t signal; ++ wlanitem_u32_t noise; ++ wlanitem_u32_t rate; ++ wlanitem_u32_t istx; /* tx? 0:no 1:yes */ ++ wlanitem_u32_t frmlen; ++} WLAN_PACKED wlansniffrm_t; ++#define WLANSNIFFFRM 0x0041 ++#define WLANSNIFFFRM_hosttime 0x1041 ++#define WLANSNIFFFRM_mactime 0x2041 ++#define WLANSNIFFFRM_channel 0x3041 ++#define WLANSNIFFFRM_rssi 0x4041 ++#define WLANSNIFFFRM_sq 0x5041 ++#define WLANSNIFFFRM_signal 0x6041 ++#define WLANSNIFFFRM_noise 0x7041 ++#define WLANSNIFFFRM_rate 0x8041 ++#define WLANSNIFFFRM_istx 0x9041 ++#define WLANSNIFFFRM_frmlen 0xA041 +Index: linux-2.6.23/drivers/net/wireless/acx/wlan_mgmt.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/acx/wlan_mgmt.h 2008-01-20 21:13:40.000000000 +0000 +@@ -0,0 +1,582 @@ ++/*********************************************************************** ++** Copyright (C) 2003 ACX100 Open Source Project ++** ++** The contents of this file are subject to the Mozilla Public ++** License Version 1.1 (the "License"); you may not use this file ++** except in compliance with the License. You may obtain a copy of ++** the License at http://www.mozilla.org/MPL/ ++** ++** Software distributed under the License is distributed on an "AS ++** IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or ++** implied. See the License for the specific language governing ++** rights and limitations under the License. ++** ++** Alternatively, the contents of this file may be used under the ++** terms of the GNU Public License version 2 (the "GPL"), in which ++** case the provisions of the GPL are applicable instead of the ++** above. If you wish to allow the use of your version of this file ++** only under the terms of the GPL and not to allow others to use ++** your version of this file under the MPL, indicate your decision ++** by deleting the provisions above and replace them with the notice ++** and other provisions required by the GPL. If you do not delete ++** the provisions above, a recipient may use your version of this ++** file under either the MPL or the GPL. ++** --------------------------------------------------------------------- ++** Inquiries regarding the ACX100 Open Source Project can be ++** made directly to: ++** ++** acx100-users@lists.sf.net ++** http://acx100.sf.net ++** --------------------------------------------------------------------- ++*/ ++ ++/*********************************************************************** ++** This code is based on elements which are ++** Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. ++** info@linux-wlan.com ++** http://www.linux-wlan.com ++*/ ++ ++/*********************************************************************** ++** Constants ++*/ ++ ++/*-- Information Element IDs --------------------*/ ++#define WLAN_EID_SSID 0 ++#define WLAN_EID_SUPP_RATES 1 ++#define WLAN_EID_FH_PARMS 2 ++#define WLAN_EID_DS_PARMS 3 ++#define WLAN_EID_CF_PARMS 4 ++#define WLAN_EID_TIM 5 ++#define WLAN_EID_IBSS_PARMS 6 ++#define WLAN_EID_COUNTRY 7 /* 802.11d */ ++#define WLAN_EID_FH_HOP_PARMS 8 /* 802.11d */ ++#define WLAN_EID_FH_TABLE 9 /* 802.11d */ ++#define WLAN_EID_REQUEST 10 /* 802.11d */ ++/*-- values 11-15 reserved --*/ ++#define WLAN_EID_CHALLENGE 16 ++/*-- values 17-31 reserved for challenge text extension --*/ ++#define WLAN_EID_PWR_CONSTRAINT 32 /* 11h PowerConstraint */ ++#define WLAN_EID_ERP_INFO 42 /* was seen from WRT54GS with OpenWrt */ ++#define WLAN_EID_NONERP 47 /* was seen from WRT54GS with OpenWrt */ ++#define WLAN_EID_RSN 48 ++#define WLAN_EID_EXT_RATES 50 ++#define WLAN_EID_UNKNOWN128 128 ++#define WLAN_EID_UNKNOWN133 133 ++#define WLAN_EID_GENERIC 221 /* was seen from WRT54GS with OpenWrt */ ++#define WLAN_EID_UNKNOWN223 223 ++ ++#if 0 ++#define WLAN_EID_PWR_CAP 33 /* 11h PowerCapability */ ++#define WLAN_EID_TPC_REQUEST 34 /* 11h TPC Request */ ++#define WLAN_EID_TPC_REPORT 35 /* 11h TPC Report */ ++#define WLAN_EID_SUPP_CHANNELS 36 /* 11h Supported Channels */ ++#define WLAN_EID_CHANNEL_SWITCH 37 /* 11h ChannelSwitch */ ++#define WLAN_EID_MEASURE_REQUEST 38 /* 11h MeasurementRequest */ ++#define WLAN_EID_MEASURE_REPORT 39 /* 11h MeasurementReport */ ++#define WLAN_EID_QUIET_ID 40 /* 11h Quiet */ ++#define WLAN_EID_IBSS_DFS_ID 41 /* 11h IBSS_DFS */ ++#endif ++ ++/*-- Reason Codes -------------------------------*/ ++#define WLAN_MGMT_REASON_RSVD 0 ++#define WLAN_MGMT_REASON_UNSPEC 1 ++#define WLAN_MGMT_REASON_PRIOR_AUTH_INVALID 2 ++#define WLAN_MGMT_REASON_DEAUTH_LEAVING 3 ++#define WLAN_MGMT_REASON_DISASSOC_INACTIVE 4 ++#define WLAN_MGMT_REASON_DISASSOC_AP_BUSY 5 ++#define WLAN_MGMT_REASON_CLASS2_NONAUTH 6 ++#define WLAN_MGMT_REASON_CLASS3_NONASSOC 7 ++#define WLAN_MGMT_REASON_DISASSOC_STA_HASLEFT 8 ++#define WLAN_MGMT_REASON_CANT_ASSOC_NONAUTH 9 ++ ++/*-- Status Codes -------------------------------*/ ++#define WLAN_MGMT_STATUS_SUCCESS 0 ++#define WLAN_MGMT_STATUS_UNSPEC_FAILURE 1 ++#define WLAN_MGMT_STATUS_CAPS_UNSUPPORTED 10 ++#define WLAN_MGMT_STATUS_REASSOC_NO_ASSOC 11 ++#define WLAN_MGMT_STATUS_ASSOC_DENIED_UNSPEC 12 ++#define WLAN_MGMT_STATUS_UNSUPPORTED_AUTHALG 13 ++#define WLAN_MGMT_STATUS_RX_AUTH_NOSEQ 14 ++#define WLAN_MGMT_STATUS_CHALLENGE_FAIL 15 ++#define WLAN_MGMT_STATUS_AUTH_TIMEOUT 16 ++#define WLAN_MGMT_STATUS_ASSOC_DENIED_BUSY 17 ++#define WLAN_MGMT_STATUS_ASSOC_DENIED_RATES 18 ++/* p80211b additions */ ++#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOSHORT 19 ++#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOPBCC 20 ++#define WLAN_MGMT_STATUS_ASSOC_DENIED_NOAGILITY 21 ++ ++/*-- Auth Algorithm Field ---------------------------*/ ++#define WLAN_AUTH_ALG_OPENSYSTEM 0 ++#define WLAN_AUTH_ALG_SHAREDKEY 1 ++ ++/*-- Management Frame Field Offsets -------------*/ ++/* Note: Not all fields are listed because of variable lengths */ ++/* Note: These offsets are from the start of the frame data */ ++ ++#define WLAN_BEACON_OFF_TS 0 ++#define WLAN_BEACON_OFF_BCN_INT 8 ++#define WLAN_BEACON_OFF_CAPINFO 10 ++#define WLAN_BEACON_OFF_SSID 12 ++ ++#define WLAN_DISASSOC_OFF_REASON 0 ++ ++#define WLAN_ASSOCREQ_OFF_CAP_INFO 0 ++#define WLAN_ASSOCREQ_OFF_LISTEN_INT 2 ++#define WLAN_ASSOCREQ_OFF_SSID 4 ++ ++#define WLAN_ASSOCRESP_OFF_CAP_INFO 0 ++#define WLAN_ASSOCRESP_OFF_STATUS 2 ++#define WLAN_ASSOCRESP_OFF_AID 4 ++#define WLAN_ASSOCRESP_OFF_SUPP_RATES 6 ++ ++#define WLAN_REASSOCREQ_OFF_CAP_INFO 0 ++#define WLAN_REASSOCREQ_OFF_LISTEN_INT 2 ++#define WLAN_REASSOCREQ_OFF_CURR_AP 4 ++#define WLAN_REASSOCREQ_OFF_SSID 10 ++ ++#define WLAN_REASSOCRESP_OFF_CAP_INFO 0 ++#define WLAN_REASSOCRESP_OFF_STATUS 2 ++#define WLAN_REASSOCRESP_OFF_AID 4 ++#define WLAN_REASSOCRESP_OFF_SUPP_RATES 6 ++ ++#define WLAN_PROBEREQ_OFF_SSID 0 ++ ++#define WLAN_PROBERESP_OFF_TS 0 ++#define WLAN_PROBERESP_OFF_BCN_INT 8 ++#define WLAN_PROBERESP_OFF_CAP_INFO 10 ++#define WLAN_PROBERESP_OFF_SSID 12 ++ ++#define WLAN_AUTHEN_OFF_AUTH_ALG 0 ++#define WLAN_AUTHEN_OFF_AUTH_SEQ 2 ++#define WLAN_AUTHEN_OFF_STATUS 4 ++#define WLAN_AUTHEN_OFF_CHALLENGE 6 ++ ++#define WLAN_DEAUTHEN_OFF_REASON 0 ++ ++enum { ++IEEE16(WF_MGMT_CAP_ESS, 0x0001) ++IEEE16(WF_MGMT_CAP_IBSS, 0x0002) ++/* In (re)assoc request frames by STA: ++** Pollable=0, PollReq=0: STA is not CF-Pollable ++** 0 1: STA is CF-Pollable, not requesting to be placed on the CF-Polling list ++** 1 0: STA is CF-Pollable, requesting to be placed on the CF-Polling list ++** 1 1: STA is CF-Pollable, requesting never to be polled ++** In beacon, proberesp, (re)assoc resp frames by AP: ++** 0 0: No point coordinator at AP ++** 0 1: Point coordinator at AP for delivery only (no polling) ++** 1 0: Point coordinator at AP for delivery and polling ++** 1 1: Reserved */ ++IEEE16(WF_MGMT_CAP_CFPOLLABLE, 0x0004) ++IEEE16(WF_MGMT_CAP_CFPOLLREQ, 0x0008) ++/* 1=non-WEP data frames are disallowed */ ++IEEE16(WF_MGMT_CAP_PRIVACY, 0x0010) ++/* In beacon, proberesp, (re)assocresp by AP/AdHoc: ++** 1=use of shortpre is allowed ("I can receive shortpre") */ ++IEEE16(WF_MGMT_CAP_SHORT, 0x0020) ++IEEE16(WF_MGMT_CAP_PBCC, 0x0040) ++IEEE16(WF_MGMT_CAP_AGILITY, 0x0080) ++/* In (re)assoc request frames by STA: ++** 1=short slot time implemented and enabled ++** NB: AP shall use long slot time beginning at the next Beacon after assoc ++** of STA with this bit set to 0 ++** In beacon, proberesp, (re)assoc resp frames by AP: ++** currently used slot time value: 0/1 - long/short */ ++IEEE16(WF_MGMT_CAP_SHORTSLOT, 0x0400) ++/* In (re)assoc request frames by STA: 1=CCK-OFDM is implemented and enabled ++** In beacon, proberesp, (re)assoc resp frames by AP/AdHoc: ++** 1=CCK-OFDM is allowed */ ++IEEE16(WF_MGMT_CAP_CCKOFDM, 0x2000) ++}; ++ ++ ++/*********************************************************************** ++** Types ++*/ ++ ++/* Information Element types */ ++ ++/* prototype structure, all IEs start with these members */ ++typedef struct wlan_ie { ++ u8 eid; ++ u8 len; ++} WLAN_PACKED wlan_ie_t; ++ ++/*-- Service Set Identity (SSID) -----------------*/ ++typedef struct wlan_ie_ssid { ++ u8 eid; ++ u8 len; ++ u8 ssid[1]; /* may be zero */ ++} WLAN_PACKED wlan_ie_ssid_t; ++ ++/*-- Supported Rates -----------------------------*/ ++typedef struct wlan_ie_supp_rates { ++ u8 eid; ++ u8 len; ++ u8 rates[1]; /* had better be at LEAST one! */ ++} WLAN_PACKED wlan_ie_supp_rates_t; ++ ++/*-- FH Parameter Set ----------------------------*/ ++typedef struct wlan_ie_fh_parms { ++ u8 eid; ++ u8 len; ++ u16 dwell; ++ u8 hopset; ++ u8 hoppattern; ++ u8 hopindex; ++} WLAN_PACKED wlan_ie_fh_parms_t; ++ ++/*-- DS Parameter Set ----------------------------*/ ++typedef struct wlan_ie_ds_parms { ++ u8 eid; ++ u8 len; ++ u8 curr_ch; ++} WLAN_PACKED wlan_ie_ds_parms_t; ++ ++/*-- CF Parameter Set ----------------------------*/ ++typedef struct wlan_ie_cf_parms { ++ u8 eid; ++ u8 len; ++ u8 cfp_cnt; ++ u8 cfp_period; ++ u16 cfp_maxdur; ++ u16 cfp_durremaining; ++} WLAN_PACKED wlan_ie_cf_parms_t; ++ ++/*-- TIM ------------------------------------------*/ ++typedef struct wlan_ie_tim { ++ u8 eid; ++ u8 len; ++ u8 dtim_cnt; ++ u8 dtim_period; ++ u8 bitmap_ctl; ++ u8 virt_bm[1]; ++} WLAN_PACKED wlan_ie_tim_t; ++ ++/*-- IBSS Parameter Set ---------------------------*/ ++typedef struct wlan_ie_ibss_parms { ++ u8 eid; ++ u8 len; ++ u16 atim_win; ++} WLAN_PACKED wlan_ie_ibss_parms_t; ++ ++/*-- Challenge Text ------------------------------*/ ++typedef struct wlan_ie_challenge { ++ u8 eid; ++ u8 len; ++ u8 challenge[1]; ++} WLAN_PACKED wlan_ie_challenge_t; ++ ++/*-- ERP (42) -------------------------------------*/ ++typedef struct wlan_ie_erp { ++ u8 eid; ++ u8 len; ++ /* bit 0:Non ERP present ++ ** 1:Use Protection ++ ** 2:Barker Preamble mode ++ ** 3-7:reserved */ ++ u8 erp; ++} WLAN_PACKED wlan_ie_erp_t; ++ ++/* Types for parsing mgmt frames */ ++ ++/* prototype structure, all mgmt frame types will start with these members */ ++typedef struct wlan_fr_mgmt { ++ u16 type; ++ u16 len; /* DOES NOT include FCS */ ++ wlan_hdr_t *hdr; ++ /* used for target specific data, skb in Linux */ ++ /*-- fixed fields -----------*/ ++ /*-- info elements ----------*/ ++} WLAN_PACKED wlan_fr_mgmt_t; ++ ++/*-- Beacon ---------------------------------------*/ ++typedef struct wlan_fr_beacon { ++ u16 type; ++ u16 len; ++ wlan_hdr_t *hdr; ++ /*-- fixed fields -----------*/ ++ u64 *ts; ++ u16 *bcn_int; ++ u16 *cap_info; ++ /*-- info elements ----------*/ ++ wlan_ie_ssid_t *ssid; ++ wlan_ie_supp_rates_t *supp_rates; ++ wlan_ie_supp_rates_t *ext_rates; ++ wlan_ie_fh_parms_t *fh_parms; ++ wlan_ie_ds_parms_t *ds_parms; ++ wlan_ie_cf_parms_t *cf_parms; ++ wlan_ie_ibss_parms_t *ibss_parms; ++ wlan_ie_tim_t *tim; /* in beacon only, not proberesp */ ++ wlan_ie_erp_t *erp; /* in beacon only, not proberesp */ ++} wlan_fr_beacon_t; ++#define wlan_fr_proberesp wlan_fr_beacon ++#define wlan_fr_proberesp_t wlan_fr_beacon_t ++ ++/*-- IBSS ATIM ------------------------------------*/ ++typedef struct wlan_fr_ibssatim { ++ u16 type; ++ u16 len; ++ wlan_hdr_t *hdr; ++ /*-- fixed fields -----------*/ ++ /*-- info elements ----------*/ ++ /* this frame type has a null body */ ++} wlan_fr_ibssatim_t; ++ ++/*-- Disassociation -------------------------------*/ ++typedef struct wlan_fr_disassoc { ++ u16 type; ++ u16 len; ++ wlan_hdr_t *hdr; ++ /*-- fixed fields -----------*/ ++ u16 *reason; ++ /*-- info elements ----------*/ ++} wlan_fr_disassoc_t; ++ ++/*-- Association Request --------------------------*/ ++typedef struct wlan_fr_assocreq { ++ u16 type; ++ u16 len; ++ wlan_hdr_t *hdr; ++ /*-- fixed fields -----------*/ ++ u16 *cap_info; ++ u16 *listen_int; ++ /*-- info elements ----------*/ ++ wlan_ie_ssid_t *ssid; ++ wlan_ie_supp_rates_t *supp_rates; ++ wlan_ie_supp_rates_t *ext_rates; ++} wlan_fr_assocreq_t; ++ ++/*-- Association Response -------------------------*/ ++typedef struct wlan_fr_assocresp { ++ u16 type; ++ u16 len; ++ wlan_hdr_t *hdr; ++ /*-- fixed fields -----------*/ ++ u16 *cap_info; ++ u16 *status; ++ u16 *aid; ++ /*-- info elements ----------*/ ++ wlan_ie_supp_rates_t *supp_rates; ++ wlan_ie_supp_rates_t *ext_rates; ++} wlan_fr_assocresp_t; ++ ++/*-- Reassociation Request ------------------------*/ ++typedef struct wlan_fr_reassocreq { ++ u16 type; ++ u16 len; ++ wlan_hdr_t *hdr; ++ /*-- fixed fields -----------*/ ++ u16 *cap_info; ++ u16 *listen_int; ++ u8 *curr_ap; ++ /*-- info elements ----------*/ ++ wlan_ie_ssid_t *ssid; ++ wlan_ie_supp_rates_t *supp_rates; ++ wlan_ie_supp_rates_t *ext_rates; ++} wlan_fr_reassocreq_t; ++ ++/*-- Reassociation Response -----------------------*/ ++typedef struct wlan_fr_reassocresp { ++ u16 type; ++ u16 len; ++ wlan_hdr_t *hdr; ++ /*-- fixed fields -----------*/ ++ u16 *cap_info; ++ u16 *status; ++ u16 *aid; ++ /*-- info elements ----------*/ ++ wlan_ie_supp_rates_t *supp_rates; ++ wlan_ie_supp_rates_t *ext_rates; ++} wlan_fr_reassocresp_t; ++ ++/*-- Probe Request --------------------------------*/ ++typedef struct wlan_fr_probereq { ++ u16 type; ++ u16 len; ++ wlan_hdr_t *hdr; ++ /*-- fixed fields -----------*/ ++ /*-- info elements ----------*/ ++ wlan_ie_ssid_t *ssid; ++ wlan_ie_supp_rates_t *supp_rates; ++ wlan_ie_supp_rates_t *ext_rates; ++} wlan_fr_probereq_t; ++ ++/*-- Authentication -------------------------------*/ ++typedef struct wlan_fr_authen { ++ u16 type; ++ u16 len; ++ wlan_hdr_t *hdr; ++ /*-- fixed fields -----------*/ ++ u16 *auth_alg; ++ u16 *auth_seq; ++ u16 *status; ++ /*-- info elements ----------*/ ++ wlan_ie_challenge_t *challenge; ++} wlan_fr_authen_t; ++ ++/*-- Deauthenication -----------------------------*/ ++typedef struct wlan_fr_deauthen { ++ u16 type; ++ u16 len; ++ wlan_hdr_t *hdr; ++ /*-- fixed fields -----------*/ ++ u16 *reason; ++ /*-- info elements ----------*/ ++} wlan_fr_deauthen_t; ++ ++/* Types for building mgmt frames */ ++ ++/* Warning. Several types used in below structs are ++** in fact variable length. Use structs with such fields with caution */ ++typedef struct auth_frame_body { ++ u16 auth_alg; ++ u16 auth_seq; ++ u16 status; ++ wlan_ie_challenge_t challenge; ++} WLAN_PACKED auth_frame_body_t; ++ ++typedef struct assocresp_frame_body { ++ u16 cap_info; ++ u16 status; ++ u16 aid; ++ wlan_ie_supp_rates_t rates; ++} WLAN_PACKED assocresp_frame_body_t; ++ ++typedef struct reassocreq_frame_body { ++ u16 cap_info; ++ u16 listen_int; ++ u8 current_ap[ETH_ALEN]; ++ wlan_ie_ssid_t ssid; ++/* access to this one is disabled since ssid_t is variable length: */ ++ /* wlan_ie_supp_rates_t rates; */ ++} WLAN_PACKED reassocreq_frame_body_t; ++ ++typedef struct reassocresp_frame_body { ++ u16 cap_info; ++ u16 status; ++ u16 aid; ++ wlan_ie_supp_rates_t rates; ++} WLAN_PACKED reassocresp_frame_body_t; ++ ++typedef struct deauthen_frame_body { ++ u16 reason; ++} WLAN_PACKED deauthen_frame_body_t; ++ ++typedef struct disassoc_frame_body { ++ u16 reason; ++} WLAN_PACKED disassoc_frame_body_t; ++ ++typedef struct probereq_frame_body { ++ wlan_ie_ssid_t ssid; ++ wlan_ie_supp_rates_t rates; ++} WLAN_PACKED probereq_frame_body_t; ++ ++typedef struct proberesp_frame_body { ++ u8 timestamp[8]; ++ u16 beacon_int; ++ u16 cap_info; ++ wlan_ie_ssid_t ssid; ++/* access to these is disabled since ssid_t is variable length: */ ++ /* wlan_ie_supp_rates_t rates; */ ++ /* fhps_t fhps; */ ++ /* dsps_t dsps; */ ++ /* cfps_t cfps; */ ++} WLAN_PACKED proberesp_frame_body_t; ++ ++ ++/*********************************************************************** ++** Functions ++*/ ++ ++/* Helpers for parsing mgmt frames */ ++void wlan_mgmt_decode_ibssatim(wlan_fr_ibssatim_t *f); ++void wlan_mgmt_decode_assocreq(wlan_fr_assocreq_t *f); ++void wlan_mgmt_decode_assocresp(wlan_fr_assocresp_t *f); ++void wlan_mgmt_decode_authen(wlan_fr_authen_t *f); ++void wlan_mgmt_decode_beacon(wlan_fr_beacon_t *f); ++void wlan_mgmt_decode_deauthen(wlan_fr_deauthen_t *f); ++void wlan_mgmt_decode_disassoc(wlan_fr_disassoc_t *f); ++void wlan_mgmt_decode_probereq(wlan_fr_probereq_t *f); ++void wlan_mgmt_decode_proberesp(wlan_fr_proberesp_t *f); ++void wlan_mgmt_decode_reassocreq(wlan_fr_reassocreq_t *f); ++void wlan_mgmt_decode_reassocresp(wlan_fr_reassocresp_t *f); ++ ++/* Helpers for building mgmt frames */ ++static inline u8* ++wlan_fill_ie_ssid(u8 *p, int len, const char *ssid) ++{ ++ struct wlan_ie_ssid *ie = (void*)p; ++ ie->eid = WLAN_EID_SSID; ++ ie->len = len; ++ memcpy(ie->ssid, ssid, len); ++ return p + len + 2; ++} ++/* This controls whether we create 802.11g 'ext supported rates' IEs ++** or just create overlong 'supported rates' IEs instead ++** (non-11g compliant) */ ++#define WE_OBEY_802_11G 1 ++static inline u8* ++wlan_fill_ie_rates(u8 *p, int len, const u8 *rates) ++{ ++ struct wlan_ie_supp_rates *ie = (void*)p; ++#if WE_OBEY_802_11G ++ if (len > 8 ) len = 8; ++#endif ++ /* supported rates (1 to 8 octets) */ ++ ie->eid = WLAN_EID_SUPP_RATES; ++ ie->len = len; ++ memcpy(ie->rates, rates, len); ++ return p + len + 2; ++} ++/* This one wouldn't create an IE at all if not needed */ ++static inline u8* ++wlan_fill_ie_rates_ext(u8 *p, int len, const u8 *rates) ++{ ++ struct wlan_ie_supp_rates *ie = (void*)p; ++#if !WE_OBEY_802_11G ++ return p; ++#endif ++ len -= 8; ++ if (len <= 0) return p; ++ /* ext supported rates */ ++ ie->eid = WLAN_EID_EXT_RATES; ++ ie->len = len; ++ memcpy(ie->rates, rates+8, len); ++ return p + len + 2; ++} ++static inline u8* ++wlan_fill_ie_ds_parms(u8 *p, int channel) ++{ ++ struct wlan_ie_ds_parms *ie = (void*)p; ++ ie->eid = WLAN_EID_DS_PARMS; ++ ie->len = 1; ++ ie->curr_ch = channel; ++ return p + sizeof(*ie); ++} ++static inline u8* ++wlan_fill_ie_ibss_parms(u8 *p, int atim_win) ++{ ++ struct wlan_ie_ibss_parms *ie = (void*)p; ++ ie->eid = WLAN_EID_IBSS_PARMS; ++ ie->len = 2; ++ ie->atim_win = atim_win; ++ return p + sizeof(*ie); ++} ++static inline u8* ++wlan_fill_ie_tim(u8 *p, int rem, int period, int bcast, ++ int ofs, int len, const u8 *vbm) ++{ ++ struct wlan_ie_tim *ie = (void*)p; ++ ie->eid = WLAN_EID_TIM; ++ ie->len = len + 3; ++ ie->dtim_cnt = rem; ++ ie->dtim_period = period; ++ ie->bitmap_ctl = ofs | (bcast!=0); ++ if (vbm) ++ memcpy(ie->virt_bm, vbm, len); /* min 1 byte */ ++ else ++ ie->virt_bm[0] = 0; ++ return p + len + 3 + 2; ++} +Index: linux-2.6.23/drivers/net/wireless/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/net/wireless/Kconfig 2008-01-20 21:13:17.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/Kconfig 2008-01-20 21:15:12.000000000 +0000 +@@ -5,6 +5,36 @@ + menu "Wireless LAN" + depends on !S390 + ++config NET_RADIO ++ bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions" ++ select WIRELESS_EXT ++ ---help--- ++ Support for wireless LANs and everything having to do with radio, ++ but not with amateur radio or FM broadcasting. ++ ++ Saying Y here also enables the Wireless Extensions (creates ++ /proc/net/wireless and enables iwconfig access). The Wireless ++ Extension is a generic API allowing a driver to expose to the user ++ space configuration and statistics specific to common Wireless LANs. ++ The beauty of it is that a single set of tool can support all the ++ variations of Wireless LANs, regardless of their type (as long as ++ the driver supports Wireless Extension). Another advantage is that ++ these parameters may be changed on the fly without restarting the ++ driver (or Linux). If you wish to use Wireless Extensions with ++ wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch ++ the tools from ++ . ++ ++config NET_WIRELESS_RTNETLINK ++ bool "Wireless Extension API over RtNetlink" ++ depends on NET_RADIO ++ ---help--- ++ Support the Wireless Extension API over the RtNetlink socket ++ in addition to the traditional ioctl interface (selected above). ++ ++ For now, few tools use this facility, but it might grow in the ++ future. The only downside is that it adds 4.5 kB to your kernel. ++ + config WLAN_PRE80211 + bool "Wireless LAN (pre-802.11)" + depends on NETDEVICES +@@ -650,6 +680,7 @@ config P54_PCI + + source "drivers/net/wireless/iwlwifi/Kconfig" + source "drivers/net/wireless/hostap/Kconfig" ++source "drivers/net/wireless/acx/Kconfig" + source "drivers/net/wireless/bcm43xx/Kconfig" + source "drivers/net/wireless/b43/Kconfig" + source "drivers/net/wireless/b43legacy/Kconfig" +Index: linux-2.6.23/drivers/net/wireless/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/net/wireless/Makefile 2008-01-20 21:13:17.000000000 +0000 ++++ linux-2.6.23/drivers/net/wireless/Makefile 2008-01-20 21:13:40.000000000 +0000 +@@ -34,6 +34,8 @@ obj-$(CONFIG_PCMCIA_ATMEL) += atmel + + obj-$(CONFIG_PRISM54) += prism54/ + ++obj-$(CONFIG_ACX) += acx/ ++ + obj-$(CONFIG_HOSTAP) += hostap/ + obj-$(CONFIG_BCM43XX) += bcm43xx/ + obj-$(CONFIG_B43) += b43/ diff --git a/meta/packages/linux/linux-rp-2.6.24/htcuni.patch b/meta/packages/linux/linux-rp-2.6.24/htcuni.patch new file mode 100644 index 0000000000..f462650566 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/htcuni.patch @@ -0,0 +1,7928 @@ +--- + arch/arm/Kconfig | 2 + arch/arm/mach-pxa/Kconfig | 89 + + arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/generic.c | 13 + arch/arm/mach-pxa/htcuniversal/Makefile | 19 + arch/arm/mach-pxa/htcuniversal/htcuniversal.c | 468 +++++ + arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c | 917 +++++++++++ + arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h | 65 + arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c | 143 + + arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c | 61 + arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c | 135 + + arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h | 17 + arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c | 87 + + arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c | 226 ++ + arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c | 212 ++ + arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c | 167 ++ + arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.h | 16 + arch/arm/mach-pxa/htcuniversal/htcuniversal_pm.c | 69 + arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c | 97 + + arch/arm/mach-pxa/htcuniversal/htcuniversal_ts2.c | 490 ++++++ + arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c | 71 + arch/arm/mach-pxa/htcuniversal/tsc2046_ts.h | 20 + drivers/input/keyboard/Kconfig | 7 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/asic3_keys.c | 131 + + drivers/leds/Kconfig | 7 + drivers/leds/Makefile | 1 + drivers/leds/leds-asic3.c | 189 ++ + drivers/mfd/Kconfig | 10 + drivers/mfd/Makefile | 2 + drivers/mfd/asic3_base.c | 1208 +++++++++++++++ + drivers/mfd/soc-core.c | 106 + + drivers/mfd/soc-core.h | 30 + drivers/mmc/host/Kconfig | 6 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/asic3_mmc.c | 900 +++++++++++ + drivers/mmc/host/asic3_mmc.h | 25 + drivers/serial/pxa.c | 22 + include/asm-arm/arch-pxa/clock.h | 27 + include/asm-arm/arch-pxa/htcuniversal-asic.h | 213 ++ + include/asm-arm/arch-pxa/htcuniversal-gpio.h | 220 ++ + include/asm-arm/arch-pxa/htcuniversal-init.h | 14 + include/asm-arm/arch-pxa/htcuniversal.h | 3 + include/asm-arm/arch-pxa/irqs.h | 2 + include/asm-arm/arch-pxa/pxa-pm_ll.h | 6 + include/asm-arm/arch-pxa/pxa-regs.h | 2 + include/asm-arm/arch-pxa/serial.h | 78 + include/asm-arm/hardware/asic3_keys.h | 18 + include/asm-arm/hardware/asic3_leds.h | 34 + include/asm-arm/hardware/ipaq-asic3.h | 602 +++++++ + include/linux/backlight.h | 7 + include/linux/gpiodev.h | 44 + include/linux/input_pda.h | 47 + include/linux/ioport.h | 1 + include/linux/soc/asic3_base.h | 104 + + include/linux/soc/tmio_mmc.h | 17 + 56 files changed, 7469 insertions(+), 1 deletion(-) + +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/Makefile +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/Makefile 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,19 @@ ++# ++# Makefile for HTC Universal ++# ++ ++snd-htcuniversal-ak4641-objs := htcuniversal_ak4641.o ++ ++obj-$(CONFIG_MACH_HTCUNIVERSAL) += htcuniversal.o ++obj-$(CONFIG_HTCUNIVERSAL_CORE) += htcuniversal_core.o ++obj-$(CONFIG_HTCUNIVERSAL_POWER) += htcuniversal_power2.o ++obj-$(CONFIG_HTCUNIVERSAL_LCD) += htcuniversal_lcd.o ++obj-$(CONFIG_HTCUNIVERSAL_BACKLIGHT) += htcuniversal_bl.o ++obj-$(CONFIG_HTCUNIVERSAL_TS2) += htcuniversal_ts2.o ++obj-$(CONFIG_HTCUNIVERSAL_BUTTONS) += htcuniversal_buttons.o ++obj-$(CONFIG_HTCUNIVERSAL_BLUETOOTH) += htcuniversal_bt.o ++obj-$(CONFIG_HTCUNIVERSAL_PHONE) += htcuniversal_phone.o ++obj-$(CONFIG_HTCUNIVERSAL_ASIC3_LEDS) += htcuniversal_asic3_leds.o ++obj-$(CONFIG_HTCUNIVERSAL_UDC) += htcuniversal_udc.o ++ ++obj-$(CONFIG_HTCUNIVERSAL_AK4641) += htcuniversal_ak4641.o +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,468 @@ ++/* ++ * Hardware definitions for HTC Universal ++ * ++ * Copyright (c) 2006 Oleg Gusev ++ * ++ * Use consistent with the GNU GPL is permitted, ++ * provided that this copyright notice is ++ * preserved in its entirety in all copies and derived works. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include "../generic.h" ++ ++#include "htcuniversal_bt.h" ++#include "htcuniversal_phone.h" ++#include "tsc2046_ts.h" ++ ++/* ++ * IRDA ++ */ ++ ++static void htcuniversal_irda_transceiver_mode(struct device *dev, int mode) ++{ ++ /* */ ++} ++ ++static struct pxaficp_platform_data htcuniversal_ficp_platform_data = { ++ .transceiver_cap = IR_SIRMODE | IR_FIRMODE, ++ .transceiver_mode = htcuniversal_irda_transceiver_mode, ++}; ++ ++/* ++ * Bluetooth - Relies on other loadable modules, like ASIC3 and Core, ++ * so make the calls indirectly through pointers. Requires that the ++ * htcuniversal_bt module be loaded before any attempt to use ++ * bluetooth (obviously). ++ */ ++ ++static struct htcuniversal_bt_funcs bt_funcs; ++ ++static void ++htcuniversal_bt_configure( int state ) ++{ ++ if (bt_funcs.configure != NULL) ++ bt_funcs.configure( state ); ++} ++ ++static struct htcuniversal_phone_funcs phone_funcs; ++ ++static void ++htcuniversal_phone_configure( int state ) ++{ ++ if (phone_funcs.configure != NULL) ++ phone_funcs.configure( state ); ++} ++ ++//void htcuniversal_ll_pm_init(void); ++ ++extern struct platform_device htcuniversal_bl; ++static struct platform_device htcuniversal_lcd = { .name = "htcuniversal_lcd", }; ++//static struct platform_device htcuniversal_kbd = { .name = "htcuniversal_kbd", }; ++static struct platform_device htcuniversal_buttons = { .name = "htcuniversal_buttons", }; ++//static struct platform_device htcuniversal_ts = { .name = "htcuniversal_ts", }; ++//static struct platform_device htcuniversal_bt = { .name = "htcuniversal_bt", }; ++//static struct platform_device htcuniversal_phone = { .name = "htcuniversal_phone", }; ++static struct platform_device htcuniversal_power = { .name = "htcuniversal_power", }; ++static struct platform_device htcuniversal_udc = { .name = "htcuniversal_udc", }; ++ ++static struct tsc2046_mach_info htcuniversal_ts_platform_data = { ++ .port = 1, ++ .clock = CKEN_SSP1, ++ .pwrbit_X = 1, ++ .pwrbit_Y = 1, ++ .irq = 0 /* asic3 irq */ ++}; ++ ++static struct platform_device htcuniversal_ts = { ++ .name = "htcuniversal_ts", ++ .dev = { ++ .platform_data = &htcuniversal_ts_platform_data, ++ }, ++}; ++ ++ ++/* Bluetooth */ ++ ++static struct platform_device htcuniversal_bt = { ++ .name = "htcuniversal_bt", ++ .id = -1, ++ .dev = { ++ .platform_data = &bt_funcs, ++ }, ++}; ++ ++static struct platform_device htcuniversal_phone = { ++ .name = "htcuniversal_phone", ++ .id = -1, ++ .dev = { ++ .platform_data = &phone_funcs, ++ }, ++}; ++ ++/* PXA2xx Keys */ ++ ++static struct gpio_keys_button htcuniversal_button_table[] = { ++ { KEY_POWER, GPIO_NR_HTCUNIVERSAL_KEY_ON_N, 1 }, ++}; ++ ++static struct gpio_keys_platform_data htcuniversal_pxa_keys_data = { ++ .buttons = htcuniversal_button_table, ++ .nbuttons = ARRAY_SIZE(htcuniversal_button_table), ++}; ++ ++static struct platform_device htcuniversal_pxa_keys = { ++ .name = "gpio-keys", ++ .dev = { ++ .platform_data = &htcuniversal_pxa_keys_data, ++ }, ++ .id = -1, ++}; ++ ++/**************************************************************** ++ * Keyboard ++ ****************************************************************/ ++ ++static struct pxa27x_keyboard_platform_data htcuniversal_kbd = { ++ .nr_rows = 8, ++ .nr_cols = 8, ++ .keycodes = { ++ { ++ /* row 0 */ ++ KEY_ENTER, ++ KEY_MINUS, ++ KEY_ESC, ++ KEY_1, ++ KEY_TAB, ++ KEY_CAPSLOCK, ++ KEY_LEFTSHIFT, ++ KEY_RIGHTALT, /* Fn */ ++ }, { /* row 1 */ ++ KEY_COMMA, ++ KEY_EQUAL, ++ KEY_F1, ++ KEY_2, ++ KEY_Q, ++ KEY_A, ++ KEY_Z, ++ KEY_LEFTCTRL, ++ }, { /* row 2 */ ++ KEY_UP, ++ KEY_I, ++ KEY_F2, ++ KEY_3, ++ KEY_W, ++ KEY_S, ++ KEY_X, ++ KEY_F6, ++ }, { /* row 3 */ ++ KEY_DOT, ++ KEY_O, ++ KEY_F3, ++ KEY_4, ++ KEY_E, ++ KEY_D, ++ KEY_C, ++ KEY_LEFTALT, ++ }, { /* row 4 */ ++ KEY_F9, ++ KEY_P, ++ KEY_F4, ++ KEY_5, ++ KEY_R, ++ KEY_F, ++ KEY_V, ++ KEY_SPACE, ++ }, { /* row 5 */ ++ KEY_RIGHT, ++ KEY_BACKSPACE, ++ KEY_F5, ++ KEY_6, ++ KEY_T, ++ KEY_G, ++ KEY_B, ++ KEY_F7, ++ }, { /* row 6 */ ++ KEY_F9, ++ KEY_K, ++ KEY_9, ++ KEY_7, ++ KEY_Y, ++ KEY_H, ++ KEY_N, ++ KEY_LEFT, ++ }, { /* row 7 */ ++ KEY_F10, ++ KEY_L, ++ KEY_0, ++ KEY_8, ++ KEY_U, ++ KEY_J, ++ KEY_M, ++ KEY_DOWN, ++ }, ++ }, ++ .gpio_modes = { ++ GPIO_NR_HTCUNIVERSAL_KP_MKIN0_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKIN1_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKIN2_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKIN3_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKIN4_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKIN5_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKIN6_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKIN7_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKOUT0_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKOUT1_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKOUT2_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKOUT3_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKOUT4_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKOUT5_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKOUT6_MD, ++ GPIO_NR_HTCUNIVERSAL_KP_MKOUT7_MD, ++ }, ++}; ++ ++static struct platform_device htcuniversal_pxa_keyboard = { ++ .name = "pxa27x-keyboard", ++ .id = -1, ++ .dev = { ++ .platform_data = &htcuniversal_kbd, ++ }, ++}; ++/* Core Hardware Functions */ ++ ++struct platform_device htcuniversal_core = { ++ .name = "htcuniversal_core", ++ .id = 0, ++ .dev = { ++ .platform_data = NULL, ++ }, ++}; ++ ++static struct platform_device *devices[] __initdata = { ++ &htcuniversal_core, ++// &htcuniversal_flash, ++ &htcuniversal_pxa_keyboard, ++ &htcuniversal_pxa_keys, ++}; ++ ++static struct platform_device *htcuniversal_asic3_devices[] __initdata = { ++ &htcuniversal_lcd, ++#ifdef CONFIG_HTCUNIVERSAL_BACKLIGHT ++ &htcuniversal_bl, ++#endif ++ &htcuniversal_buttons, ++ &htcuniversal_ts, ++ &htcuniversal_bt, ++ &htcuniversal_phone, ++ &htcuniversal_power, ++ &htcuniversal_udc, ++}; ++ ++static struct asic3_platform_data htcuniversal_asic3_platform_data = { ++ ++ /* Setting ASIC3 GPIO registers to the below initialization states ++ * HTC Universal asic3 information: ++ * http://wiki.xda-developers.com/index.php?pagename=UniversalASIC3 ++ * http://wiki.xda-developers.com/index.php?pagename=ASIC3 ++ * ++ * dir: Direction of the GPIO pin. 0: input, 1: output. ++ * If unknown, set as output to avoid power consuming floating input nodes ++ * init: Initial state of the GPIO bits ++ * ++ * These registers are configured as they are on Wince. ++ */ ++ .gpio_a = { ++ .dir = (1<> 18) & 0xfffc, ++ .boot_params = 0xa0000100, ++ .map_io = htcuniversal_map_io, ++ .init_irq = htcuniversal_init_irq, ++ .init_machine = htcuniversal_init, ++ .timer = &pxa_timer, ++MACHINE_END +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,917 @@ ++/* ++ * Audio support for codec Asahi Kasei AK4641 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Copyright (c) 2006 Giorgio Padrin ++ * ++ * History: ++ * ++ * 2006-03 Written -- Giorgio Padrin ++ * 2006-09 Test and debug on machine (HP hx4700) -- Elshin Roman ++ * ++ * AK4641 codec device driver ++ * ++ * Copyright (c) 2005 SDG Systems, LLC ++ * ++ * Based on code: ++ * Copyright (c) 2002 Hewlett-Packard Company ++ * Copyright (c) 2000 Nicolas Pitre ++ * Copyright (c) 2000 Lernout & Hauspie Speech Products, N.V. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License. ++ */ ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "htcuniversal_ak4641.h" ++ ++/* Registers */ ++#define R_PM1 0x00 ++#define R_PM2 0x01 ++#define R_SEL1 0x02 ++#define R_SEL2 0x03 ++#define R_MODE1 0x04 ++#define R_MODE2 0x05 ++#define R_DAC 0x06 ++#define R_MIC 0x07 ++#define REG_TIMER 0x08 ++#define REG_ALC1 0x09 ++#define REG_ALC2 0x0a ++#define R_PGA 0x0b ++#define R_ATTL 0x0c ++#define R_ATTR 0x0d ++#define REG_VOL 0x0e ++#define R_STATUS 0x0f ++#define REG_EQLO 0x10 ++#define REG_EQMID 0x11 ++#define REG_EQHI 0x12 ++#define REG_BTIF 0x13 ++ ++/* Register flags */ ++/* REG_PWR1 */ ++#define R_PM1_PMADC 0x01 ++#define R_PM1_PMMIC 0x02 ++#define REG_PWR1_PMAUX 0x04 ++#define REG_PWR1_PMMO 0x08 ++#define R_PM1_PMLO 0x10 ++/* unused 0x20 */ ++/* unused 0x40 */ ++#define R_PM1_PMVCM 0x80 ++ ++/* REG_PWR2 */ ++#define R_PM2_PMDAC 0x01 ++/* unused 0x02 */ ++/* unused 0x04 */ ++#define R_PM2_PMMO2 0x08 ++#define REG_PWR2_MCKAC 0x10 ++/* unused 0x20 */ ++/* unused 0x40 */ ++#define R_PM2_MCKPD 0x80 ++ ++/* REG_SEL1 */ ++#define R_SEL1_PSMO2 0x01 ++/* unused 0x02 */ ++/* unused 0x04 */ ++/* unused 0x08 */ ++#define REG_SEL1_MICM 0x10 ++#define REG_SEL1_DACM 0x20 ++#define REG_SEL1_PSMO 0x40 ++#define REG_SEL1_MOGN 0x80 ++ ++/* REG_SEL2 */ ++#define R_SEL2_PSLOR 0x01 ++#define R_SEL2_PSLOL 0x02 ++#define REG_SEL2_AUXSI 0x04 ++/* unused 0x08 */ ++#define REG_SEL2_MICL 0x10 ++#define REG_SEL2_AUXL 0x20 ++/* unused 0x40 */ ++#define R_SEL2_DACL 0x80 ++ ++/* REG_MODE1 */ ++#define REG_MODE1_DIF0 0x01 ++#define REG_MODE1_DIF1 0x02 ++/* unused 0x04 */ ++/* unused 0x08 */ ++/* unused 0x10 */ ++/* unused 0x20 */ ++/* unused 0x40 */ ++/* unused 0x80 */ ++ ++/* REG_MODE2 */ ++/* unused 0x01 */ ++#define REG_MODE2_LOOP 0x02 ++#define REG_MODE2_HPM 0x04 ++/* unused 0x08 */ ++/* unused 0x10 */ ++#define REG_MODE2_MCK0 0x20 ++#define REG_MODE2_MCK1 0x40 ++/* unused 0x80 */ ++ ++/* REG_DAC */ ++#define REG_DAC_DEM0 0x01 ++#define REG_DAC_DEM1 0x02 ++#define REG_DAC_EQ 0x04 ++/* unused 0x08 */ ++#define R_DAC_DATTC 0x10 ++#define R_DAC_SMUTE 0x20 ++#define REG_DAC_TM 0x40 ++/* unused 0x80 */ ++ ++/* REG_MIC */ ++#define R_MIC_MGAIN 0x01 ++#define R_MIC_MSEL 0x02 ++#define R_MIC_MICAD 0x04 ++#define R_MIC_MPWRI 0x08 ++#define R_MIC_MPWRE 0x10 ++#define REG_MIC_AUXAD 0x20 ++/* unused 0x40 */ ++/* unused 0x80 */ ++ ++/* REG_TIMER */ ++ ++#define REG_TIMER_LTM0 0x01 ++#define REG_TIMER_LTM1 0x02 ++#define REG_TIMER_WTM0 0x04 ++#define REG_TIMER_WTM1 0x08 ++#define REG_TIMER_ZTM0 0x10 ++#define REG_TIMER_ZTM1 0x20 ++/* unused 0x40 */ ++/* unused 0x80 */ ++ ++#define REG_ALC1_LMTH 0x01 ++#define REG_ALC1_RATT 0x02 ++#define REG_ALC1_LMAT0 0x04 ++#define REG_ALC1_LMAT1 0x08 ++#define REG_ALC1_ZELM 0x10 ++#define REG_ALC1_ALC1 0x20 ++/* unused 0x40 */ ++/* unused 0x80 */ ++ ++/* REG_ALC2 */ ++ ++/* REG_PGA */ ++ ++/* REG_ATTL */ ++ ++/* REG_ATTR */ ++ ++/* REG_VOL */ ++#define REG_VOL_ATTM 0x80 ++ ++/* REG_STATUS */ ++#define R_STATUS_DTMIC 0x01 ++ ++/* REG_EQ controls use 4 bits for each of 5 EQ levels */ ++ ++/* Bluetooth not yet implemented */ ++#define REG_BTIF_PMAD2 0x01 ++#define REG_BTIF_PMDA2 0x02 ++#define REG_BTIF_PMBIF 0x04 ++#define REG_BTIF_ADC2 0x08 ++#define REG_BTIF_DAC2 0x10 ++#define REG_BTIF_BTFMT0 0x20 ++#define REG_BTIF_BTFMT1 0x40 ++/* unused 0x80 */ ++ ++/* begin {{ I2C }} */ ++ ++static struct i2c_driver snd_ak4641_i2c_driver = { ++ .driver = { ++ .name = "ak4641-i2c" ++ }, ++}; ++ ++static int snd_ak4641_i2c_init(void) ++{ ++ return i2c_add_driver(&snd_ak4641_i2c_driver); ++} ++ ++static void snd_ak4641_i2c_free(void) ++{ ++ i2c_del_driver(&snd_ak4641_i2c_driver); ++} ++ ++static inline int snd_ak4641_i2c_probe(struct snd_ak4641 *ak) ++{ ++ if (ak->i2c_client.adapter == NULL) return -EINVAL; ++ ak->i2c_client.addr = 0x12; ++ if (i2c_smbus_xfer(ak->i2c_client.adapter, ak->i2c_client.addr, ++ 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0) ++ return -ENODEV; ++ else return 0; ++} ++ ++static int snd_ak4641_i2c_attach(struct snd_ak4641 *ak) ++{ ++ int ret = 0; ++ if ((ret = snd_ak4641_i2c_probe(ak)) < 0) return ret; ++ snprintf(ak->i2c_client.name, sizeof(ak->i2c_client.name), ++ "ak4641-i2c at %d-%04x", ++ i2c_adapter_id(ak->i2c_client.adapter), ak->i2c_client.addr); ++ return i2c_attach_client(&ak->i2c_client); ++} ++ ++static void snd_ak4641_i2c_detach(struct snd_ak4641 *ak) ++{ ++ i2c_detach_client(&ak->i2c_client); ++} ++ ++/* end {{ I2C }} */ ++ ++ ++/* begin {{ Registers & Cache Ops }} */ ++ ++static int snd_ak4641_hwsync(struct snd_ak4641 *ak, int read, u8 reg) ++{ ++ struct i2c_msg msgs[2]; ++ u8 buf[2]; ++ int ret; ++ ++ snd_assert(reg < ARRAY_SIZE(ak->regs), return -EINVAL); ++ ++ /* setup i2c msgs */ ++ msgs[0].addr = ak->i2c_client.addr; ++ msgs[0].flags = 0; ++ msgs[0].buf = buf; ++ if (!read) ++ msgs[0].len = 2; ++ else { ++ msgs[1].flags = I2C_M_RD; ++ msgs[1].addr = msgs[0].addr; ++ msgs[1].buf = msgs[0].buf + 1; ++ msgs[0].len = 1; ++ msgs[1].len = 1; ++ } ++ ++ buf[0] = reg; ++ ++ /* regs[reg] -> buffer, on write */ ++ if (!read) buf[1] = ak->regs[reg]; ++ ++ /* i2c transfer */ ++ ret = i2c_transfer(ak->i2c_client.adapter, msgs, read ? 2 : 1); ++ if (ret != (read ? 2 : 1)) return ret; /* transfer error */ //@@ error ret < 0, or not ? ++ ++ /* regs[reg] <- buffer, on read */ ++ if (read) ak->regs[reg] = buf[1]; ++ ++ return 0; ++} ++ ++static inline int snd_ak4641_hwsync_read(struct snd_ak4641 *ak, u8 reg) ++{ ++ return snd_ak4641_hwsync(ak, 1, reg); ++} ++ ++static inline int snd_ak4641_hwsync_write(struct snd_ak4641 *ak, u8 reg) ++{ ++ return snd_ak4641_hwsync(ak, 0, reg); ++} ++ ++static int snd_ak4641_hwsync_read_all(struct snd_ak4641 *ak) ++{ ++ u8 reg; ++ for (reg = 0; reg < ARRAY_SIZE(ak->regs); reg++) ++ if (snd_ak4641_hwsync_read(ak, reg) < 0) return -1; ++ return 0; ++} ++ ++static int snd_ak4641_hwsync_write_all(struct snd_ak4641 *ak) ++{ ++ u8 reg; ++ for (reg = 0; reg < ARRAY_SIZE(ak->regs); reg++) ++ if (snd_ak4641_hwsync_write(ak, reg) < 0) return -1; ++ return 0; ++} ++ ++static int snd_ak4641_reg_changed(struct snd_ak4641 *ak, u8 reg) ++{ ++ if ((reg != R_PGA && ak->powered_on) || ++ (reg == R_PGA && (ak->regs[R_PM1] & R_PM1_PMMIC))) ++ return snd_ak4641_hwsync_write(ak, reg); ++ return 0; ++} ++ ++/* end {{ Registers & Cache Ops }}*/ ++ ++ ++static inline void snd_ak4641_lock(struct snd_ak4641 *ak) ++{ ++ down(&ak->sem); ++} ++ ++static inline void snd_ak4641_unlock(struct snd_ak4641 *ak) ++{ ++ up(&ak->sem); ++} ++ ++#define WRITE_MASK(i, val, mask) (((i) & ~(mask)) | ((val) & (mask))) ++ ++ ++/* begin {{ Controls }} */ ++ ++#define INV_RANGE(val, mask) \ ++ (~(val) & (mask)) ++ ++/*-begin----------------------------------------------------------*/ ++static int snd_ak4641_actl_playback_volume_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 2; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 0xff; ++ return 0; ++} ++ ++static int snd_ak4641_actl_playback_volume_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; ++ ++ snd_ak4641_lock(ak); ++ ucontrol->value.integer.value[0] = INV_RANGE(ak->regs[R_ATTL], 0xff); ++ ucontrol->value.integer.value[1] = INV_RANGE(ak->regs[R_ATTR], 0xff); ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++ ++static int snd_ak4641_actl_playback_volume_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; ++ ++ snd_ak4641_lock(ak); ++ ak->regs[R_ATTL] = INV_RANGE(ucontrol->value.integer.value[0], 0xff); ++ ak->regs[R_ATTR] = INV_RANGE(ucontrol->value.integer.value[1], 0xff); ++ snd_ak4641_reg_changed(ak, R_ATTL); ++ snd_ak4641_reg_changed(ak, R_ATTR); ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++/*-end------------------------------------------------------------*/ ++ ++/*-begin----------------------------------------------------------*/ ++static int snd_ak4641_actl_mic_gain_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 0x7f; ++ return 0; ++} ++ ++static int snd_ak4641_actl_mic_gain_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; ++ ++ ucontrol->value.integer.value[0] = ak->regs[R_PGA]; ++ return 0; ++} ++ ++static int snd_ak4641_actl_mic_gain_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; ++ ++ snd_ak4641_lock(ak); ++ ak->regs[R_PGA] = ucontrol->value.integer.value[0]; ++ snd_ak4641_reg_changed(ak, R_PGA); ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++/*-end------------------------------------------------------------*/ ++ ++#define ACTL(ctl_name, _name) \ ++static struct snd_kcontrol_new snd_ak4641_actl_ ## ctl_name = \ ++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = _name, \ ++ .info = snd_ak4641_actl_ ## ctl_name ## _info, \ ++ .get = snd_ak4641_actl_ ## ctl_name ## _get, .put = snd_ak4641_actl_ ## ctl_name ## _put }; ++ ++ACTL(playback_volume, "Master Playback Volume") ++ACTL(mic_gain, "Mic Capture Gain") ++ ++struct snd_ak4641_uctl_bool { ++ int (*get) (struct snd_ak4641 *uda); ++ int (*set) (struct snd_ak4641 *uda, int on); ++}; ++ ++static int snd_ak4641_actl_bool_info(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_info *uinfo) ++{ ++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; ++ uinfo->count = 1; ++ return 0; ++} ++ ++static int snd_ak4641_actl_bool_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; ++ struct snd_ak4641_uctl_bool *uctl = ++ (struct snd_ak4641_uctl_bool *) kcontrol->private_value; ++ ++ ucontrol->value.integer.value[0] = uctl->get(ak); ++ return 0; ++} ++ ++static int snd_ak4641_actl_bool_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct snd_ak4641 *ak = (struct snd_ak4641 *) kcontrol->private_data; ++ struct snd_ak4641_uctl_bool *uctl = ++ (struct snd_ak4641_uctl_bool *) kcontrol->private_value; ++ ++ return uctl->set(ak, ucontrol->value.integer.value[0]); ++} ++ ++/*-begin----------------------------------------------------------*/ ++static int snd_ak4641_uctl_playback_switch_get(struct snd_ak4641 *ak) ++{ ++ return (ak->regs[R_DAC] & R_DAC_SMUTE) == 0x00; ++} ++ ++static int snd_ak4641_uctl_playback_switch_set(struct snd_ak4641 *ak, int on) ++{ ++ snd_ak4641_lock(ak); ++ ak->regs[R_DAC] = WRITE_MASK(ak->regs[R_DAC], ++ on ? 0x00 : R_DAC_SMUTE, R_DAC_SMUTE); ++ snd_ak4641_reg_changed(ak, R_DAC); ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++/*-end------------------------------------------------------------*/ ++ ++/*-begin----------------------------------------------------------*/ ++static int snd_ak4641_uctl_mic_boost_get(struct snd_ak4641 *ak) ++{ ++ return (ak->regs[R_MIC] & R_MIC_MGAIN) == R_MIC_MGAIN; ++} ++ ++static int snd_ak4641_uctl_mic_boost_set(struct snd_ak4641 *ak, int on) ++{ ++ snd_ak4641_lock(ak); ++ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], ++ on ? R_MIC_MGAIN : 0x00, R_MIC_MGAIN); ++ snd_ak4641_reg_changed(ak, R_MIC); ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++/*-end------------------------------------------------------------*/ ++ ++/*-begin----------------------------------------------------------*/ ++static int snd_ak4641_uctl_mono_out_get(struct snd_ak4641 *ak) ++{ ++ printk("mono_out status 0x%8.8x -> 0x%8.8x\n",ak->regs[R_SEL1], ak->regs[R_SEL1] & REG_SEL1_PSMO); ++ return (ak->regs[R_SEL1] & REG_SEL1_PSMO) == REG_SEL1_PSMO; ++} ++ ++static int snd_ak4641_uctl_mono_out_set(struct snd_ak4641 *ak, int on) ++{ ++ printk("phone mic enable called. on=%d\n",on); ++ snd_ak4641_lock(ak); ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], on ? R_PM1_PMMIC : 0x00, R_PM1_PMMIC); ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], on ? REG_PWR1_PMMO : 0x00, REG_PWR1_PMMO); ++ snd_ak4641_reg_changed(ak, R_PM1); ++ ++ snd_ak4641_hwsync_write(ak, R_PGA); /* mic PGA gain is reset when PMMIC = 0 */ ++ ++ /* internal mic */ ++ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], on ? R_MIC_MPWRI : 0x0, R_MIC_MPWRI); ++ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], 0x0, R_MIC_MSEL); ++ snd_ak4641_hwsync_write(ak, R_MIC); ++ ++// ak->regs[REG_BTIF] = WRITE_MASK(ak->regs[REG_BTIF], 0x0, REG_BTIF_DAC2); ++// snd_ak4641_hwsync_write(ak, REG_BTIF); ++ /* */ ++// ak->regs[REG_VOL] = WRITE_MASK(ak->regs[REG_VOL], on ? REG_VOL_ATTM : 0x00, REG_VOL_ATTM); ++// ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_MOGN : 0x00, REG_SEL1_MOGN); ++ ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_MICM : 0x00, REG_SEL1_MICM); ++ ak->regs[R_SEL1] = WRITE_MASK(ak->regs[R_SEL1], on ? REG_SEL1_PSMO : 0x00, REG_SEL1_PSMO); ++ snd_ak4641_reg_changed(ak, R_SEL1); ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++/*-end------------------------------------------------------------*/ ++ ++#define ACTL_BOOL(ctl_name, _name) \ ++static struct snd_ak4641_uctl_bool snd_ak4641_actl_ ## ctl_name ## _pvalue = \ ++{ .get = snd_ak4641_uctl_ ## ctl_name ## _get, \ ++ .set = snd_ak4641_uctl_ ## ctl_name ## _set }; \ ++static struct snd_kcontrol_new snd_ak4641_actl_ ## ctl_name = \ ++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = _name, .info = snd_ak4641_actl_bool_info, \ ++ .get = snd_ak4641_actl_bool_get, .put = snd_ak4641_actl_bool_put, \ ++ .private_value = (unsigned long) &snd_ak4641_actl_ ## ctl_name ## _pvalue }; ++ ++ACTL_BOOL(playback_switch, "Master Playback Switch") ++ACTL_BOOL(mic_boost, "Mic Boost (+20dB)") ++ACTL_BOOL(mono_out, "Phone mic enable") ++ ++static void snd_ak4641_headphone_on(struct snd_ak4641 *ak, int on); ++static void snd_ak4641_speaker_on(struct snd_ak4641 *ak, int on); ++static void snd_ak4641_select_mic(struct snd_ak4641 *ak); ++ ++void snd_ak4641_hp_connected(struct snd_ak4641 *ak, int connected) ++{ ++ snd_ak4641_lock(ak); ++ if (connected != ak->hp_connected) { ++ ak->hp_connected = connected; ++ ++ /* headphone or speaker, on playback */ ++ if (ak->playback_on) { ++ if (connected) { ++ snd_ak4641_headphone_on(ak, 1); ++ snd_ak4641_speaker_on(ak, 0); ++ } else { ++ snd_ak4641_speaker_on(ak, 1); ++ snd_ak4641_headphone_on(ak, 0); ++ } ++ } ++ ++ /* headset or internal mic, on capture */ ++ if (ak->capture_on) ++ snd_ak4641_select_mic(ak); ++ } ++ snd_ak4641_unlock(ak); ++} ++ ++/* end {{ Controls }} */ ++ ++ ++/* begin {{ Headphone Detected Notification }} */ ++ ++static void snd_ak4641_hp_detected_w_fn(void *p) ++{ ++ struct snd_ak4641 *ak = (struct snd_ak4641 *)p; ++ ++ snd_ak4641_hp_connected(ak, ak->hp_detected.detected); ++} ++ ++void snd_ak4641_hp_detected(struct snd_ak4641 *ak, int detected) ++{ ++ if (detected != ak->hp_detected.detected) { ++ ak->hp_detected.detected = detected; ++ queue_work(ak->hp_detected.wq, &ak->hp_detected.w); ++ } ++} ++ ++static int snd_ak4641_hp_detected_init(struct snd_ak4641 *ak) ++{ ++ INIT_WORK(&ak->hp_detected.w, snd_ak4641_hp_detected_w_fn); ++ ak->hp_detected.detected = ak->hp_connected; ++ ak->hp_detected.wq = create_singlethread_workqueue("ak4641"); ++ if (ak->hp_detected.wq) return 0; ++ else return -1; ++} ++ ++static void snd_ak4641_hp_detected_free(struct snd_ak4641 *ak) ++{ ++ destroy_workqueue(ak->hp_detected.wq); ++} ++ ++/* end {{ Headphone Detected Notification }} */ ++ ++ ++/* begin {{ Codec Control }} */ ++ ++static void snd_ak4641_headphone_on(struct snd_ak4641 *ak, int on) ++{ ++ if (on) { ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO); ++ snd_ak4641_hwsync_write(ak, R_PM1); ++ ak->headphone_out_on(1); ++ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], ++ R_SEL2_PSLOL | R_SEL2_PSLOR, ++ R_SEL2_PSLOL | R_SEL2_PSLOR); ++ snd_ak4641_hwsync_write(ak, R_SEL2); ++ } else { ++ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], ++ 0x00, R_SEL2_PSLOL | R_SEL2_PSLOR); ++ snd_ak4641_hwsync_write(ak, R_SEL2); ++ ak->headphone_out_on(0); ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO); ++ snd_ak4641_hwsync_write(ak, R_PM1); ++ } ++} ++ ++static void snd_ak4641_speaker_on(struct snd_ak4641 *ak, int on) ++{ ++ if (on) { ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO); ++ snd_ak4641_hwsync_write(ak, R_PM1); ++ ak->speaker_out_on(1); ++ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], ++ R_SEL2_PSLOL | R_SEL2_PSLOR, ++ R_SEL2_PSLOL | R_SEL2_PSLOR); ++ snd_ak4641_hwsync_write(ak, R_SEL2); ++ } else { ++ ak->regs[R_SEL2] = WRITE_MASK(ak->regs[R_SEL2], ++ 0x00, R_SEL2_PSLOL | R_SEL2_PSLOR); ++ snd_ak4641_hwsync_write(ak, R_SEL2); ++ ak->speaker_out_on(0); ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO); ++ snd_ak4641_hwsync_write(ak, R_PM1); ++ } ++} ++ ++static inline int snd_ak4641_power_on(struct snd_ak4641 *ak) ++{ ++ ak->reset_pin(1); ++ ak->power_on_chip(1); ++ msleep(1); ++ ak->reset_pin(0); ++ ak->powered_on = 1; ++ return 0; ++} ++ ++static inline int snd_ak4641_power_off(struct snd_ak4641 *ak) ++{ ++ ak->powered_on = 0; ++ ak->power_on_chip(0); ++ return 0; ++} ++ ++static inline void snd_ak4641_headphone_out_on(struct snd_ak4641 *ak, int on) ++{ ++ if (ak->headphone_out_on) ak->headphone_out_on(on); ++} ++ ++static inline void snd_ak4641_speaker_out_on(struct snd_ak4641 *ak, int on) ++{ ++ if (ak->speaker_out_on) ak->speaker_out_on(on); ++} ++ ++static int snd_ak4641_playback_on(struct snd_ak4641 *ak) ++{ ++ if (ak->playback_on) return 0; ++ ++ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], ++ R_PM2_PMDAC, R_PM2_MCKPD | R_PM2_PMDAC); ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMLO, R_PM1_PMLO); ++ snd_ak4641_hwsync_write(ak, R_PM2); ++ snd_ak4641_hwsync_write(ak, R_PM1); ++ if (ak->hp_connected) snd_ak4641_headphone_on(ak, 1); ++ else snd_ak4641_speaker_on(ak, 1); ++ ++ ak->playback_on = 1; ++ ++ return 0; ++} ++ ++static int snd_ak4641_playback_off(struct snd_ak4641 *ak) ++{ ++ if (!ak->playback_on) return 0; ++ ++ ak->playback_on = 0; ++ ++ if (ak->hp_connected) snd_ak4641_headphone_on(ak, 0); ++ else snd_ak4641_speaker_on(ak, 0); ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMLO); ++ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], ++ (!ak->capture_on ? R_PM2_MCKPD : 0x00) | R_PM2_PMDAC, ++ R_PM2_MCKPD | R_PM2_PMDAC); ++ snd_ak4641_hwsync_write(ak, R_PM1); ++ snd_ak4641_hwsync_write(ak, R_PM2); ++ ++ return 0; ++} ++ ++static void snd_ak4641_select_mic(struct snd_ak4641 *ak) ++{ ++ int mic = 0; ++ u8 r_mic; ++ ++ if (ak->hp_connected) { ++ /* check headset mic */ ++ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], R_MIC_MPWRE, R_MIC_MPWRE); ++ snd_ak4641_hwsync_write(ak, R_MIC); ++ snd_ak4641_hwsync_read(ak, R_STATUS); ++ mic = (ak->regs[R_STATUS] & R_STATUS_DTMIC) == R_STATUS_DTMIC; ++ ++ printk("htcuniversal_ak4641_select_mic: mic=%d\n",mic); ++ ++ r_mic = WRITE_MASK(ak->regs[R_MIC], ++ R_MIC_MSEL | (ak->capture_on ? R_MIC_MPWRE : 0x00), ++ R_MIC_MSEL | R_MIC_MPWRI | R_MIC_MPWRE); ++ } ++ else ++ r_mic = WRITE_MASK(ak->regs[R_MIC], ++ 0x00 | (ak->capture_on ? R_MIC_MPWRI : 0x00), ++ R_MIC_MSEL | R_MIC_MPWRI | R_MIC_MPWRE); ++ ++ if (r_mic != ak->regs[R_MIC]) { ++ ak->regs[R_MIC] = r_mic; ++ snd_ak4641_hwsync_write(ak, R_MIC); ++ } ++} ++ ++static int snd_ak4641_capture_on(struct snd_ak4641 *ak) ++{ ++ if (ak->capture_on) return 0; ++ ++ if (!ak->playback_on) { ++ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], 0x00, R_PM2_MCKPD); ++ snd_ak4641_hwsync_write(ak, R_PM2); ++ } ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMMIC | R_PM1_PMADC, ++ R_PM1_PMMIC | R_PM1_PMADC); ++ snd_ak4641_hwsync_write(ak, R_PM1); ++ snd_ak4641_hwsync_write(ak, R_PGA); /* mic PGA gain is reset when PMMIC = 0 */ ++ ++ ak->capture_on = 1; ++ ++ snd_ak4641_select_mic(ak); ++ ++ msleep(47); /* accounts for ADC init cycle, time enough for fs >= 44.1 kHz */ ++ ++ return 0; ++} ++ ++static int snd_ak4641_capture_off(struct snd_ak4641 *ak) ++{ ++ if (!ak->capture_on) return 0; ++ ++ ak->regs[R_MIC] = WRITE_MASK(ak->regs[R_MIC], ++ 0x00, R_MIC_MPWRI | R_MIC_MPWRE | R_MIC_MSEL); ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], 0x00, R_PM1_PMMIC | R_PM1_PMADC); ++ snd_ak4641_hwsync_write(ak, R_MIC); ++ snd_ak4641_hwsync_write(ak, R_PM1); ++ if (!ak->playback_on) { ++ ak->regs[R_PM2] = WRITE_MASK(ak->regs[R_PM2], R_PM2_MCKPD, R_PM2_MCKPD); ++ snd_ak4641_hwsync_write(ak, R_PM2); ++ } ++ ++ ak->capture_on = 0; ++ ++ return 0; ++} ++ ++int snd_ak4641_open_stream(struct snd_ak4641 *ak, int stream) ++{ ++ snd_ak4641_lock(ak); ++ if (stream == SNDRV_PCM_STREAM_PLAYBACK) { ++ ak->playback_stream_opened = 1; ++ snd_ak4641_playback_on(ak); ++ } else { ++ ak->capture_stream_opened = 1; ++ snd_ak4641_capture_on(ak); ++ } ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++ ++int snd_ak4641_close_stream(struct snd_ak4641 *ak, int stream) ++{ ++ snd_ak4641_lock(ak); ++ if (stream == SNDRV_PCM_STREAM_PLAYBACK) { ++ ak->playback_stream_opened = 0; ++ snd_ak4641_playback_off(ak); ++ } else { ++ ak->capture_stream_opened = 0; ++ snd_ak4641_capture_off(ak); ++ } ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++ ++static int snd_ak4641_init_regs(struct snd_ak4641 *ak) ++{ ++ snd_ak4641_hwsync_read_all(ak); ++ ++ //@@ MEMO: add some configs ++ ++ ak->regs[R_PM1] = WRITE_MASK(ak->regs[R_PM1], R_PM1_PMVCM, R_PM1_PMVCM); ++ ak->regs[R_DAC] = WRITE_MASK(ak->regs[R_DAC], 0x00, R_DAC_DATTC); ++ snd_ak4641_hwsync_write(ak, R_PM1); ++ snd_ak4641_hwsync_write(ak, R_DAC); ++ ++ return 0; ++} ++ ++int snd_ak4641_suspend(struct snd_ak4641 *ak, pm_message_t state) ++{ ++ snd_ak4641_lock(ak); ++ if (ak->playback_on) snd_ak4641_playback_off(ak); ++ if (ak->capture_on) snd_ak4641_capture_off(ak); ++ snd_ak4641_power_off(ak); ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++ ++int snd_ak4641_resume(struct snd_ak4641 *ak) ++{ ++ snd_ak4641_lock(ak); ++ snd_ak4641_power_on(ak); ++ snd_ak4641_hwsync_write_all(ak); ++ if (ak->playback_stream_opened) snd_ak4641_playback_on(ak); ++ if (ak->capture_stream_opened) snd_ak4641_capture_on(ak); ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++ ++static void snd_ak4641_init_ak(struct snd_ak4641 *ak) ++{ ++ init_MUTEX(&ak->sem); ++ ak->i2c_client.driver = &snd_ak4641_i2c_driver; ++} ++ ++int snd_ak4641_activate(struct snd_ak4641 *ak) ++{ ++ int ret = 0; ++ ++ snd_ak4641_init_ak(ak); ++ snd_ak4641_lock(ak); ++ snd_ak4641_power_on(ak); ++ if ((ret = snd_ak4641_i2c_attach(ak)) < 0) ++ goto failed_i2c_attach; ++ snd_ak4641_init_regs(ak); ++ if ((ret = snd_ak4641_hp_detected_init(ak)) < 0) ++ goto failed_hp_detected_init; ++ snd_ak4641_unlock(ak); ++ return 0; ++ ++ failed_hp_detected_init: ++ snd_ak4641_i2c_detach(ak); ++ failed_i2c_attach: ++ snd_ak4641_power_off(ak); ++ snd_ak4641_unlock(ak); ++ return ret; ++} ++ ++void snd_ak4641_deactivate(struct snd_ak4641 *ak) ++{ ++ snd_ak4641_lock(ak); ++ snd_ak4641_hp_detected_free(ak); ++ snd_ak4641_i2c_detach(ak); ++ snd_ak4641_power_off(ak); ++ snd_ak4641_unlock(ak); ++} ++ ++int snd_ak4641_add_mixer_controls(struct snd_ak4641 *ak, struct snd_card *card) ++{ ++ snd_ak4641_lock(ak); ++ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_playback_volume, ak)); ++ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_playback_switch, ak)); ++ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mic_gain, ak)); ++ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mic_boost, ak)); ++ snd_ctl_add(card, snd_ctl_new1(&snd_ak4641_actl_mono_out, ak)); ++ snd_ak4641_unlock(ak); ++ return 0; ++} ++ ++/* end {{ Codec Control }} */ ++ ++ ++/* begin {{ Module }} */ ++ ++static int __init snd_ak4641_module_on_load(void) ++{ ++ snd_ak4641_i2c_init(); ++ return 0; ++} ++ ++static void __exit snd_ak4641_module_on_unload(void) ++{ ++ snd_ak4641_i2c_free(); ++} ++ ++module_init(snd_ak4641_module_on_load); ++module_exit(snd_ak4641_module_on_unload); ++ ++EXPORT_SYMBOL(snd_ak4641_activate); ++EXPORT_SYMBOL(snd_ak4641_deactivate); ++EXPORT_SYMBOL(snd_ak4641_add_mixer_controls); ++EXPORT_SYMBOL(snd_ak4641_open_stream); ++EXPORT_SYMBOL(snd_ak4641_close_stream); ++EXPORT_SYMBOL(snd_ak4641_suspend); ++EXPORT_SYMBOL(snd_ak4641_resume); ++EXPORT_SYMBOL(snd_ak4641_hp_connected); ++EXPORT_SYMBOL(snd_ak4641_hp_detected); ++ ++MODULE_AUTHOR("Giorgio Padrin"); ++MODULE_DESCRIPTION("Audio support for codec Asahi Kasei AK4641"); ++MODULE_LICENSE("GPL"); ++ ++/* end {{ Module }} */ +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_ak4641.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,65 @@ ++/* ++ * Audio support for codec Asahi Kasei AK4641 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Copyright (c) 2006 Giorgio Padrin ++ */ ++ ++#ifndef __SOUND_AK4641_H ++#define __SOUND_AK4641_H ++ ++#include ++ ++struct snd_ak4641 { ++ struct semaphore sem; ++ ++ u8 regs[0x14]; /* registers cache */ ++ ++ unsigned int ++ powered_on:1, ++ playback_on:1, ++ playback_stream_opened:1, ++ capture_on:1, ++ capture_stream_opened:1; ++ ++ unsigned int ++ hp_connected:1; ++ ++ /* -- configuration (to fill before activation) -- */ ++ void (*power_on_chip)(int on); ++ void (*reset_pin)(int on); ++ void (*headphone_out_on)(int on); ++ void (*speaker_out_on)(int on); ++ ++ struct i2c_client i2c_client; /* to fill .adapter */ ++ /* ----------------------------------------------- */ ++ ++ struct { ++ int detected; ++ struct workqueue_struct *wq; ++ struct work_struct w; ++ } hp_detected; ++}; ++ ++ ++/* Note: opening, closing, suspending and resuming a stream ++ * require the clocks (MCLK and I2S ones) running ++ */ ++ ++/* don't forget to specify I2C adapter in i2c_client field */ ++int snd_ak4641_activate(struct snd_ak4641 *ak); ++ ++void snd_ak4641_deactivate(struct snd_ak4641 *ak); ++int snd_ak4641_add_mixer_controls(struct snd_ak4641 *ak, struct snd_card *card); ++int snd_ak4641_open_stream(struct snd_ak4641 *ak, int stream); ++int snd_ak4641_close_stream(struct snd_ak4641 *ak, int stream); ++int snd_ak4641_suspend(struct snd_ak4641 *ak, pm_message_t state); ++int snd_ak4641_resume(struct snd_ak4641 *ak); ++ ++void snd_ak4641_hp_connected(struct snd_ak4641 *ak, int connected); /* non atomic context */ ++void snd_ak4641_hp_detected(struct snd_ak4641 *ak, int detected); /* atomic context */ ++ ++#endif /* __SOUND_AK4641_H */ +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_asic3_leds.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,143 @@ ++/* ++ * LEDs support for the HP iPaq hx4700 ++ * ++ * Copyright (c) 2006 Anton Vorontsov ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++//FIXME ++//DEFINE_LED_TRIGGER_SHARED_GLOBAL(htcuniversal_radio_trig); ++//EXPORT_LED_TRIGGER_SHARED(htcuniversal_radio_trig); ++ ++static struct asic3_led htcuniversal_leds[] = { ++ { ++ .led_cdev = { ++ .name = "htcuniversal:red", ++ .default_trigger = "htcuniversal-charging", ++ }, ++ .hw_num = 2, ++ ++ }, ++ { ++ .led_cdev = { ++ .name = "htcuniversal:green", ++ .default_trigger = "htcuniversal-chargefull", ++ }, ++ .hw_num = 1, ++ }, ++ { ++ .led_cdev = { ++ .name = "htcuniversal:wifi-bt", ++ .default_trigger = "htcuniversal-radio", ++ }, ++ .hw_num = 0, ++ }, ++ { ++ .led_cdev = { ++ .name = "htcuniversal:phonebuttons", ++ .default_trigger = "htcuniversal-phonebuttons", ++ }, ++ .hw_num = -1, ++ .gpio_num = ('D'-'A')*16+GPIOD_BL_KEYP_PWR_ON, ++ }, ++ { ++ .led_cdev = { ++ .name = "htcuniversal:vibra", ++ .default_trigger = "htcuniversal-vibra", ++ }, ++ .hw_num = -1, ++ .gpio_num = ('D'-'A')*16+GPIOD_VIBRA_PWR_ON, ++ }, ++ { ++ .led_cdev = { ++ .name = "htcuniversal:flashlight1", ++ .default_trigger = "htcuniversal-flashlight1", ++ }, ++ .hw_num = -1, ++ .gpio_num = ('A'-'A')*16+GPIOA_FLASHLIGHT, ++ }, ++ { ++ .led_cdev = { ++ .name = "htcuniversal:kbdbacklight", ++ .default_trigger = "htcuniversal-kbdbacklight", ++ }, ++ .hw_num = -1, ++ .gpio_num = ('D'-'A')*16+GPIOD_BL_KEYB_PWR_ON, ++ }, ++}; ++ ++void htcuniversal_leds_release(struct device *dev) ++{ ++ return; ++} ++ ++static ++struct asic3_leds_machinfo htcuniversal_leds_machinfo = { ++ .num_leds = ARRAY_SIZE(htcuniversal_leds), ++ .leds = htcuniversal_leds, ++ .asic3_pdev = &htcuniversal_asic3, ++}; ++ ++static ++struct platform_device htcuniversal_leds_pdev = { ++ .name = "asic3-leds", ++ .dev = { ++ .platform_data = &htcuniversal_leds_machinfo, ++ .release = htcuniversal_leds_release, ++ }, ++}; ++ ++static ++int __init htcuniversal_leds_init(void) ++{ ++ int ret; ++ printk("htcuniversal LEDs Driver\n"); ++// led_trigger_register_shared("htcuniversal-radio", &htcuniversal_radio_trig); ++ ++ ret = asic3_leds_register(); ++ if (ret) goto asic3_leds_failed; ++ ++ ret = platform_device_register(&htcuniversal_leds_pdev); ++ if (ret) goto platform_device_failed; ++ ++ goto success; ++ ++platform_device_failed: ++ asic3_leds_unregister(); ++asic3_leds_failed: ++// led_trigger_unregister_shared(htcuniversal_radio_trig); ++ printk("htcuniversal LEDs Driver failed to init"); ++success: ++ return ret; ++} ++ ++static ++void __exit htcuniversal_leds_exit(void) ++{ ++// led_trigger_unregister_shared(htcuniversal_radio_trig); ++ platform_device_unregister(&htcuniversal_leds_pdev); ++ asic3_leds_unregister(); ++ return; ++} ++ ++module_init(htcuniversal_leds_init); ++module_exit(htcuniversal_leds_exit); ++ ++MODULE_AUTHOR("Anton Vorontsov "); ++MODULE_DESCRIPTION("htcuniversal LEDs driver"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bl.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,61 @@ ++/* ++ * Use consistent with the GNU GPL is permitted, ++ * provided that this copyright notice is ++ * preserved in its entirety in all copies and derived works. ++ * ++ * Copyright (C) 2006 Paul Sokolosvky ++ * Based on code from older versions of htcuniversal_lcd.c ++ * ++ */ ++ ++#include ++#include ++#include /* for pxa-regs.h (__REG) */ ++#include ++#include /* machine_is_htcuniversal */ ++//#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#define HTCUNIVERSAL_MAX_INTENSITY 0xc7 ++ ++static void htcuniversal_set_bl_intensity(int intensity) ++{ ++ PWM_CTRL1 = 1; /* pre-scaler */ ++ PWM_PWDUTY1 = intensity; /* duty cycle */ ++ PWM_PERVAL1 = HTCUNIVERSAL_MAX_INTENSITY+1; /* period */ ++ ++ if (intensity > 0) { ++ pxa_set_cken(CKEN_PWM1, 1); ++ asic3_set_gpio_out_d(&htcuniversal_asic3.dev, ++ (1<"); ++MODULE_DESCRIPTION("Backlight driver for HTC Universal"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,135 @@ ++/* Bluetooth interface driver for TI BRF6150 on HX4700 ++ * ++ * Copyright (c) 2005 SDG Systems, LLC ++ * ++ * 2005-04-21 Todd Blumer Created. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "htcuniversal_bt.h" ++ ++static uint use_led=1; ++ ++static void ++htcuniversal_bt_configure( int state ) ++{ ++ int tries; ++ ++ printk( KERN_NOTICE "htcuniversal configure bluetooth: %d\n", state ); ++ switch (state) { ++ ++ case PXA_UART_CFG_PRE_STARTUP: ++ break; ++ ++ case PXA_UART_CFG_POST_STARTUP: ++ /* pre-serial-up hardware configuration */ ++ htcuniversal_egpio_enable(1< CTS=1). Typical 150ms ++ */ ++ tries = 0; ++ do { ++ mdelay(10); ++ } while ((BTMSR & MSR_CTS) == 0 && tries++ < 50); ++ if (use_led) { ++// htcuniversal_set_led(2, 16, 16); ++ } ++ break; ++ ++ case PXA_UART_CFG_PRE_SHUTDOWN: ++ htcuniversal_egpio_disable(1<dev.platform_data; ++ ++ /* configure bluetooth UART */ ++ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_RXD_MD ); ++ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_TXD_MD ); ++ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_UART_CTS_MD ); ++ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_BT_UART_RTS_MD ); ++ ++ funcs->configure = htcuniversal_bt_configure; ++ ++ /* Make sure the LED is off */ ++// htcuniversal_clear_led(2); ++ ++ return 0; ++} ++ ++static int ++htcuniversal_bt_remove( struct platform_device *dev ) ++{ ++ struct htcuniversal_bt_funcs *funcs = dev->dev.platform_data; ++ ++ funcs->configure = NULL; ++ ++ /* Make sure the LED is off */ ++// htcuniversal_clear_led(2); ++ ++ return 0; ++} ++ ++static struct platform_driver bt_driver = { ++ .driver = { ++ .name = "htcuniversal_bt", ++ }, ++ .probe = htcuniversal_bt_probe, ++ .remove = htcuniversal_bt_remove, ++}; ++ ++module_param(use_led, uint, 0); ++ ++static int __init ++htcuniversal_bt_init( void ) ++{ ++ printk(KERN_NOTICE "htcuniversal Bluetooth Driver\n"); ++ return platform_driver_register( &bt_driver ); ++} ++ ++static void __exit ++htcuniversal_bt_exit( void ) ++{ ++ platform_driver_unregister( &bt_driver ); ++} ++ ++module_init( htcuniversal_bt_init ); ++module_exit( htcuniversal_bt_exit ); ++ ++MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC"); ++MODULE_DESCRIPTION("HTC Universal Bluetooth Support Driver"); ++MODULE_LICENSE("GPL"); ++ ++/* vim600: set noexpandtab sw=8 ts=8 :*/ ++ +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_bt.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,17 @@ ++/* ++ * Bluetooth support file for calling bluetooth configuration functions ++ * ++ * Copyright (c) 2005 SDG Systems, LLC ++ * ++ * 2005-06 Todd Blumer Initial Revision ++ */ ++ ++#ifndef _HTCUNIVERSAL_BT_H ++#define _HTCUNIVERSAL_BT_H ++ ++struct htcuniversal_bt_funcs { ++ void (*configure) ( int state ); ++}; ++ ++ ++#endif +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_buttons.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,87 @@ ++/* ++ * Buttons driver for HTC Universal ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. ++ * ++ * Copyright (C) 2005 Pawel Kolodziejski ++ * Copyright (C) 2003 Joshua Wise ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static struct asic3_keys_button asic3_buttons[] = { ++//{KEY_SCREEN, ASIC3_GPIOA_IRQ_BASE+GPIOA_COVER_ROTATE_N, 1, "screen_cover", EV_SW}, ++//{KEY_SWITCHVIDEOMODE, ASIC3_GPIOB_IRQ_BASE+GPIOB_CLAMSHELL_N, 1, "clamshell_rotate", EV_SW}, ++//{KEY_KBDILLUMTOGGLE, ASIC3_GPIOB_IRQ_BASE+GPIOB_NIGHT_SENSOR, 1, "night_sensor", EV_SW}, ++{SW_LID, ASIC3_GPIOA_IRQ_BASE+GPIOA_COVER_ROTATE_N, 1, "screen_cover", EV_SW}, ++{SW_TABLET_MODE, ASIC3_GPIOB_IRQ_BASE+GPIOB_CLAMSHELL_N, 1, "clamshell_rotate", EV_SW}, ++//{SW_NIGHT_SENSOR, ASIC3_GPIOB_IRQ_BASE+GPIOB_NIGHT_SENSOR, 1, "night_sensor", EV_SW}, ++{KEY_F10, ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_BACKLIGHT_N, 1, "backlight_button"}, ++{KEY_RECORD, ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_RECORD_N, 1, "record_button"}, ++{KEY_CAMERA, ASIC3_GPIOA_IRQ_BASE+GPIOA_BUTTON_CAMERA_N, 1, "camera_button"}, ++{KEY_VOLUMEDOWN, ASIC3_GPIOA_IRQ_BASE+GPIOA_VOL_UP_N, 1, "volume_slider_down"}, ++{KEY_VOLUMEUP, ASIC3_GPIOA_IRQ_BASE+GPIOA_VOL_DOWN_N, 1, "volume_slider_up"}, ++{KEY_KPENTER, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_OK_N, 1, "select"}, ++{KEY_RIGHT, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_RIGHT_N, 1, "right"}, ++{KEY_LEFT, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_LEFT_N, 1, "left"}, ++{KEY_DOWN, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_DOWN_N, 1, "down"}, ++{KEY_UP, ASIC3_GPIOD_IRQ_BASE+GPIOD_KEY_UP_N, 1, "up"}, ++}; ++ ++static struct asic3_keys_platform_data asic3_keys_data = { ++ .buttons = asic3_buttons, ++ .nbuttons = ARRAY_SIZE(asic3_buttons), ++ .asic3_dev = &htcuniversal_asic3.dev, ++}; ++ ++static struct platform_device htcuniversal_keys_asic3 = { ++ .name = "asic3-keys", ++ .dev = { .platform_data = &asic3_keys_data, } ++}; ++ ++static int __init htcuniversal_buttons_probe(struct platform_device *dev) ++{ ++ platform_device_register(&htcuniversal_keys_asic3); ++ return 0; ++} ++ ++static struct platform_driver htcuniversal_buttons_driver = { ++ .driver = { ++ .name = "htcuniversal_buttons", ++ }, ++ .probe = htcuniversal_buttons_probe, ++}; ++ ++static int __init htcuniversal_buttons_init(void) ++{ ++ if (!machine_is_htcuniversal()) ++ return -ENODEV; ++ ++ return platform_driver_register(&htcuniversal_buttons_driver); ++} ++ ++static void __exit htcuniversal_buttons_exit(void) ++{ ++ platform_driver_unregister(&htcuniversal_buttons_driver); ++} ++ ++module_init(htcuniversal_buttons_init); ++module_exit(htcuniversal_buttons_exit); ++ ++MODULE_AUTHOR ("Joshua Wise, Pawel Kolodziejski, Paul Sokolosvky"); ++MODULE_DESCRIPTION ("Buttons support for HTC Universal"); ++MODULE_LICENSE ("GPL"); +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_core.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,226 @@ ++/* Core Hardware driver for Hx4700 (Serial, ASIC3, EGPIOs) ++ * ++ * Copyright (c) 2005 SDG Systems, LLC ++ * ++ * 2005-03-29 Todd Blumer Converted basic structure to support hx4700 ++ * 2005-04-30 Todd Blumer Add IRDA code from H2200 ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++volatile u_int16_t *egpios; ++u_int16_t egpio_reg; ++ ++static int htc_bootloader = 0; /* Is the stock HTC bootloader installed? */ ++ ++/* ++ * may make sense to put egpios elsewhere, but they're here now ++ * since they share some of the same address space with the TI WLAN ++ * ++ * EGPIO register is write-only ++ */ ++ ++void ++htcuniversal_egpio_enable( u_int16_t bits ) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ egpio_reg |= bits; ++ *egpios = egpio_reg; ++ ++ local_irq_restore(flags); ++} ++EXPORT_SYMBOL_GPL(htcuniversal_egpio_enable); ++ ++void ++htcuniversal_egpio_disable( u_int16_t bits ) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ egpio_reg &= ~bits; ++ *egpios = egpio_reg; ++ ++ local_irq_restore(flags); ++} ++EXPORT_SYMBOL_GPL(htcuniversal_egpio_disable); ++ ++#ifdef CONFIG_PM ++ ++//void htcuniversal_ll_pm_init(void); ++ ++static int htcuniversal_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ /* Turn off external clocks here, because htcuniversal_power and asic3_mmc ++ * scared to do so to not hurt each other. (-5 mA) */ ++ ++ ++ /* 0x20c2 is HTC clock value ++ * CLOCK_CDEX_SOURCE 2 ++ * CLOCK_CDEX_SPI 0 ++ * CLOCK_CDEX_OWM 0 ++ * ++ * CLOCK_CDEX_PWM0 0 ++ * CLOCK_CDEX_PWM1 0 ++ * CLOCK_CDEX_LED0 1 ++ * CLOCK_CDEX_LED1 1 ++ * ++ * CLOCK_CDEX_LED2 0 ++ * CLOCK_CDEX_SD_HOST 0 ++ * CLOCK_CDEX_SD_BUS 0 ++ * CLOCK_CDEX_SMBUS 0 ++ * ++ * CLOCK_CDEX_CONTROL_CX 0 ++ * CLOCK_CDEX_EX0 1 ++ * CLOCK_CDEX_EX1 0 ++ * */ ++ asic3_set_clock_cdex(&htcuniversal_asic3.dev, 0xffff, CLOCK_CDEX_SOURCE1 ++ |CLOCK_CDEX_LED0 ++ |CLOCK_CDEX_LED1 ++ |CLOCK_CDEX_LED2 ++ |CLOCK_CDEX_EX0 ++ |CLOCK_CDEX_EX1); ++ ++ *egpios = 0; /* turn off all egpio power */ ++ ++ /* Wake up enable. */ ++ PWER = PWER_GPIO0 ++ | PWER_GPIO1 /* reset */ ++ | PWER_GPIO9 /* USB */ ++ | PWER_GPIO10 /* AC on USB */ ++ | PWER_GPIO14 /* ASIC3 mux */ ++ | PWER_RTC; ++ /* Wake up on falling edge. */ ++ PFER = PWER_GPIO0 ++ | PWER_GPIO1 ++ | PWER_GPIO9 ++ | PWER_GPIO10 ++ | PWER_GPIO14; ++ ++ /* Wake up on rising edge. */ ++ PRER = PWER_GPIO0 ++ | PWER_GPIO1 ++ | PWER_GPIO9 ++ | PWER_GPIO10; ++ /* 3.6864 MHz oscillator power-down enable */ ++ PCFR = PCFR_OPDE | PCFR_PI2CEN | PCFR_GPROD | PCFR_GPR_EN; ++ ++ PGSR0 = 0x09088004; ++ PGSR1 = 0x00020002; ++ PGSR2 = 0x8001c000; ++ PGSR3 = 0x00106284; ++ ++ PSLR = 0xcc000000; ++ ++#if 0 ++ /* ++ * If we're using bootldr and not the stock HTC bootloader, ++ * we want to wake up periodically to see if the charge is full while ++ * it is suspended. We do this with the OS timer 4 in the pxa270. ++ */ ++ if (!htc_bootloader) { ++ OMCR4 = 0x4b; /* Periodic, self-resetting, 1-second timer */ ++ OSMR4 = 5; /* Wake up bootldr after x seconds so it can ++ figure out what to do with the LEDs. */ ++ OIER |= 0x10; /* Enable interrupt source for Timer 4 */ ++ OSCR4 = 0; /* This starts the timer */ ++ } ++#endif ++ ++ asic3_set_extcf_select(&htcuniversal_asic3.dev, ASIC3_EXTCF_OWM_EN, 0); ++ ++ return 0; ++} ++ ++static int htcuniversal_resume(struct platform_device *dev) ++{ ++ htcuniversal_egpio_enable(0); ++ ++ return 0; ++} ++#else ++# define htcuniversal_suspend NULL ++# define htcuniversal_resume NULL ++#endif ++ ++static int ++htcuniversal_core_probe( struct platform_device *dev ) ++{ ++ ++ printk( KERN_NOTICE "HTC Universal Core Hardware Driver\n" ); ++ ++ egpios = (volatile u_int16_t *)ioremap_nocache(HTCUNIVERSAL_EGPIO_BASE, sizeof *egpios ); ++ if (!egpios) ++ return -ENODEV; ++ else ++ printk( KERN_NOTICE "HTC Universal Core: egpio at phy=0x%8.8x is at virt=0x%p\n", ++ HTCUNIVERSAL_EGPIO_BASE, egpios ); ++ ++ printk("Using stock HTC first stage bootloader\n"); ++ htc_bootloader = 1; ++ ++// htcuniversal_ll_pm_init(); ++ ++ return 0; ++} ++ ++static int ++htcuniversal_core_remove( struct platform_device *dev ) ++{ ++ ++ if (egpios != NULL) ++ iounmap( (void *)egpios ); ++ ++ return 0; ++} ++ ++static struct platform_driver htcuniversal_core_driver = { ++ .driver = { ++ .name = "htcuniversal_core", ++ }, ++ .probe = htcuniversal_core_probe, ++ .remove = htcuniversal_core_remove, ++ .suspend = htcuniversal_suspend, ++ .resume = htcuniversal_resume, ++}; ++ ++static int __init ++htcuniversal_core_init( void ) ++{ ++ return platform_driver_register( &htcuniversal_core_driver ); ++} ++ ++ ++static void __exit ++htcuniversal_core_exit( void ) ++{ ++ platform_driver_unregister( &htcuniversal_core_driver ); ++} ++ ++module_init( htcuniversal_core_init ); ++module_exit( htcuniversal_core_exit ); ++ ++MODULE_AUTHOR("Todd Blumer, SDG Systems, LLC"); ++MODULE_DESCRIPTION("HTC Universal Core Hardware Driver"); ++MODULE_LICENSE("GPL"); ++ ++/* vim600: set noexpandtab sw=8 ts=8 :*/ +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_lcd.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,212 @@ ++/* ++ * Use consistent with the GNU GPL is permitted, ++ * provided that this copyright notice is ++ * preserved in its entirety in all copies and derived works. ++ * ++ * History: ++ * ++ * 2004-03-01 Eddi De Pieri Adapted for htcuniversal using h3900_lcd.c ++ * 2004 Shawn Anderson Lcd hacking on htcuniversal ++ * see h3900_lcd.c for more history. ++ * ++ */ ++ ++#include ++#include /* for pxa-regs.h (__REG) */ ++#include ++#include /* LCCR[0,1,2,3]* */ ++#include /* for pxa-regs.h (Fld, etc) */ ++#include /* pxafb_mach_info, set_pxa_fb_info */ ++#include /* machine_is_htcuniversal */ ++#include /* lcd_device */ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++static int saved_lcdpower=-1; ++ ++static int powerup_lcd(void) ++{ ++ printk( KERN_INFO "htcuniversal powerup_lcd: called\n"); ++ ++ asic3_set_gpio_out_c(&htcuniversal_asic3.dev, 1<dev, NULL, ++ &htcuniversal_lcd_properties); ++ if (IS_ERR(htcuniversal_lcd_dev)) { ++ printk("htcuniversal_lcd_probe: error registering devices\n"); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static int htcuniversal_lcd_remove(struct platform_device * dev) ++{ ++ htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 4); ++ lcd_device_unregister(htcuniversal_lcd_dev); ++ ++ return 0; ++} ++ ++static int htcuniversal_lcd_suspend(struct platform_device * dev, pm_message_t state) ++{ ++// printk("htcuniversal_lcd_suspend: called.\n"); ++ htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 4); ++ return 0; ++} ++ ++static int htcuniversal_lcd_resume(struct platform_device * dev) ++{ ++// printk("htcuniversal_lcd_resume: called.\n"); ++ ++ /* */ ++#if 1 ++ LCCR4|=LCCR4_PCDDIV; ++#endif ++ ++ htcuniversal_lcd_set_power(htcuniversal_lcd_dev, 0); ++ return 0; ++} ++ ++static struct platform_driver htcuniversal_lcd_driver = { ++ .driver = { ++ .name = "htcuniversal_lcd", ++ }, ++ .probe = htcuniversal_lcd_probe, ++ .remove = htcuniversal_lcd_remove, ++ .suspend = htcuniversal_lcd_suspend, ++ .resume = htcuniversal_lcd_resume, ++}; ++ ++static int htcuniversal_lcd_init(void) ++{ ++ if (!machine_is_htcuniversal()) ++ return -ENODEV; ++ ++ return platform_driver_register(&htcuniversal_lcd_driver); ++} ++ ++static void htcuniversal_lcd_exit(void) ++{ ++ lcd_device_unregister(htcuniversal_lcd_dev); ++ platform_driver_unregister(&htcuniversal_lcd_driver); ++} ++ ++module_init(htcuniversal_lcd_init); ++module_exit(htcuniversal_lcd_exit); ++ ++MODULE_AUTHOR("xanadux.org"); ++MODULE_DESCRIPTION("Framebuffer driver for HTC Universal"); ++MODULE_LICENSE("GPL"); ++ +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_phone.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,167 @@ ++ ++/* Phone interface driver for Qualcomm MSM6250 on HTC Universal ++ * ++ * Copyright (c) 2005 SDG Systems, LLC ++ * ++ * 2005-04-21 Todd Blumer Created. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "htcuniversal_phone.h" ++ ++static void phone_reset(void) ++{ ++ asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1<dev.platform_data; ++ ++ /* configure phone UART */ ++ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_RXD_MD ); ++ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_TXD_MD ); ++ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS_MD ); ++ pxa_gpio_mode( GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS_MD ); ++ ++ funcs->configure = htcuniversal_phone_configure; ++ ++ return 0; ++} ++ ++static int ++htcuniversal_phone_remove( struct platform_device *dev ) ++{ ++ struct htcuniversal_phone_funcs *funcs = dev->dev.platform_data; ++ ++ funcs->configure = NULL; ++ ++ asic3_set_gpio_dir_b(&htcuniversal_asic3.dev, 1< ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_PM ++ ++static u32 *addr_a0040000; ++static u32 *addr_a0040004; ++static u32 *addr_a0040008; ++static u32 *addr_a004000c; ++ ++static u32 save_a0040000; ++static u32 save_a0040004; ++static u32 save_a0040008; ++static u32 save_a004000c; ++ ++static void htcuniversal_pxa_ll_pm_suspend(unsigned long resume_addr) ++{ ++ save_a0040000 = *addr_a0040000; ++ save_a0040004 = *addr_a0040004; ++ save_a0040008 = *addr_a0040008; ++ save_a004000c = *addr_a004000c; ++ ++ /* jump to PSPR */ ++ *addr_a0040000 = 0xe3a00101; // mov r0, #0x40000000 ++ *addr_a0040004 = 0xe380060f; // orr r0, r0, #0x0f000000 ++ *addr_a0040008 = 0xe3800008; // orr r0, r0, #8 ++ *addr_a004000c = 0xe590f000; // ldr pc, [r0] ++} ++ ++static void htcuniversal_pxa_ll_pm_resume(void) ++{ ++ *addr_a0040000 = save_a0040000; ++ *addr_a0040004 = save_a0040004; ++ *addr_a0040008 = save_a0040008; ++ *addr_a004000c = save_a004000c; ++} ++ ++static struct pxa_ll_pm_ops htcuniversal_ll_pm_ops = { ++ .suspend = htcuniversal_pxa_ll_pm_suspend, ++ .resume = htcuniversal_pxa_ll_pm_resume, ++}; ++ ++void htcuniversal_ll_pm_init(void) { ++ addr_a0040000 = phys_to_virt(0xa0040000); ++ addr_a0040004 = phys_to_virt(0xa0040004); ++ addr_a0040008 = phys_to_virt(0xa0040008); ++ addr_a004000c = phys_to_virt(0xa004000c); ++ ++ pxa_pm_set_ll_ops(&htcuniversal_ll_pm_ops); ++} ++#endif /* CONFIG_PM */ +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_power2.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,97 @@ ++/* ++ * pda_power driver for HTC Universal ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or (at ++ * your option) any later version. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++static void charge_on(int flags) ++{ ++ asic3_set_gpio_out_b(&htcuniversal_asic3.dev, 1< ++ * May 2003 ++ * ++ * Updates: ++ * ++ * 2004-02-11 Michael Opdenacker Renamed names from samcop to shamcop, ++ * Goal:support HAMCOP and SAMCOP. ++ * 2004-02-14 Michael Opdenacker Temporary fix for device id handling ++ * ++ * 2005-02-18 Aric Blumer Converted basic structure to support hx4700 ++ * ++ * 2005-06-07 Aric Blumer Added tssim device handling so we can ++ * hook in the fbvncserver. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++/* remove me */ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++ ++#include "tsc2046_ts.h" ++ ++enum touchscreen_state { ++ STATE_WAIT_FOR_TOUCH, /* Waiting for a PEN interrupt */ ++ STATE_SAMPLING /* Actively sampling ADC */ ++}; ++ ++struct touchscreen_data { ++ enum touchscreen_state state; ++ struct timer_list timer; ++ int irq; ++ struct input_dev *input; ++ /* */ ++ int port; ++ int clock; ++ int pwrbit_X; ++ int pwrbit_Y; ++ int (*pen_down)(void); ++}; ++ ++static unsigned long poll_sample_time = 10; /* Sample every 10 milliseconds */ ++ ++static struct touchscreen_data *ts_data; ++ ++static int irqblock; ++ ++module_param(poll_sample_time, ulong, 0644); ++MODULE_PARM_DESC(poll_sample_time, "Poll sample time"); ++ ++static inline void ++report_touchpanel(struct touchscreen_data *ts, int pressure, int x, int y) ++{ ++ input_report_abs(ts->input, ABS_PRESSURE, pressure); ++ input_report_abs(ts->input, ABS_X, x); ++ input_report_abs(ts->input, ABS_Y, y); ++ input_sync(ts->input); ++} ++ ++static void start_read(struct touchscreen_data *touch); ++ ++static irqreturn_t ++pen_isr(int irq, void *irq_desc) ++{ ++ struct touchscreen_data *ts = ts_data; ++ ++ if(irq == ts->irq /* && !irqblock */) { ++ irqblock = 1; ++ ++ /* ++ * Disable the pen interrupt. It's reenabled when the user lifts the ++ * pen. ++ */ ++ disable_irq(ts->irq); ++ ++ if (ts->state == STATE_WAIT_FOR_TOUCH) { ++ ts->state = STATE_SAMPLING; ++ start_read(ts); ++ } else { ++ /* Shouldn't happen */ ++ printk(KERN_ERR "Unexpected ts interrupt\n"); ++ } ++ ++ } ++ return IRQ_HANDLED; ++} ++ ++static void ++ssp_init(int port, int clock) ++{ ++ ++ pxa_set_cken(clock, 0); ++ ++ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_CLK_MD); ++ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_FRM_MD); ++ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DO_MD); ++ pxa_gpio_mode(GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DI_MD); ++ ++ SET_HTCUNIVERSAL_GPIO(SPI_FRM,1); ++ ++ /* *** Set up the SPI Registers *** */ ++ SSCR0_P(port) = ++ SSCR0_EDSS /* Extended Data Size Select */ ++ | SSCR0_SerClkDiv(7) /* Serial Clock Rate */ ++ /* Synchronous Serial Enable (Disable for now) */ ++ | SSCR0_Motorola /* Motorola SPI Interface */ ++ | SSCR0_DataSize(8) /* Data Size Select (24-bit) */ ++ ; ++ SSCR1_P(port) = 0; ++ SSPSP_P(port) = 0; ++ ++ /* Clear the Status */ ++ SSSR_P(port) = SSSR_P(port) & 0x00fcfffc; ++ ++ /* Now enable it */ ++ SSCR0_P(port) = ++ SSCR0_EDSS /* Extended Data Size Select */ ++ | SSCR0_SerClkDiv(7) /* Serial Clock Rate */ ++ | SSCR0_SSE /* Synchronous Serial Enable */ ++ | SSCR0_Motorola /* Motorola SPI Interface */ ++ | SSCR0_DataSize(8) /* Data Size Select (24-bit) */ ++ ; ++ ++ pxa_set_cken(clock, 1); ++} ++ ++static void ++start_read(struct touchscreen_data *touch) ++{ ++ unsigned long inc = (poll_sample_time * HZ) / 1000; ++ int i; ++ ++ /* Write here to the serial port. We request X and Y only for now. ++ * Then we have to wait for poll_sample_time before we read out the serial ++ * port. Then, when we read it out, we check to see if the pen is still ++ * down. If so, then we issue another request here. ++ */ ++#define TS_SAMPLES 7 ++ ++ /* ++ * We do four samples for each, and throw out the highest and lowest, then ++ * average the other two. ++ */ ++ ++ for(i = 0; i < TS_SAMPLES; i++) { ++ while(!(SSSR_P(touch->port) & SSSR_TNF)) ++ ; ++ /* It's not full. Write the command for X */ ++ SSDR_P(touch->port) = (TSC2046_SAMPLE_X|(touch->pwrbit_X))<<16; ++ } ++ ++ for(i = 0; i < TS_SAMPLES; i++) { ++ while(!(SSSR_P(touch->port) & SSSR_TNF)) ++ ; ++ /* It's not full. Write the command for Y */ ++ SSDR_P(touch->port) = (TSC2046_SAMPLE_Y|(touch->pwrbit_Y))<<16; ++ } ++ ++ /* ++ * Enable the timer. We should get an interrupt, but we want keep a timer ++ * to ensure that we can detect missing data ++ */ ++ mod_timer(&touch->timer, jiffies + inc); ++} ++ ++static void ++ts_timer_callback(unsigned long data) ++{ ++ struct touchscreen_data *ts = (struct touchscreen_data *)data; ++ int x, a[TS_SAMPLES], y; ++ static int oldx, oldy; ++ int ssrval; ++ ++ /* ++ * Check here to see if there is anything in the SPI FIFO. If so, ++ * return it if there has been a change. If not, then we have a ++ * timeout. Generate an erro somehow. ++ */ ++ ssrval = SSSR_P(ts->port); ++ ++ if(ssrval & SSSR_RNE) { /* Look at Rx Not Empty bit */ ++ int number_of_entries_in_fifo; ++ ++ /* The FIFO is not emtpy. Good! Now make sure there are at least two ++ * entries. (Should be two exactly.) */ ++ ++ number_of_entries_in_fifo = ((ssrval >> 12) & 0xf) + 1; ++ ++ if(number_of_entries_in_fifo < TS_SAMPLES * 2) { ++ /* Not ready yet. Come back later. */ ++ unsigned long inc = (poll_sample_time * HZ) / 1000; ++ mod_timer(&ts->timer, jiffies + inc); ++ return; ++ } ++ ++ if(number_of_entries_in_fifo == TS_SAMPLES * 2) { ++ int i, j; ++ ++ for(i = 0; i < TS_SAMPLES; i++) { ++ a[i] = SSDR_P(ts->port); ++ } ++ /* Sort them (bubble) */ ++ for(j = TS_SAMPLES - 1; j > 0; j--) { ++ for(i = 0; i < j; i++) { ++ if(a[i] > a[i + 1]) { ++ int tmp; ++ tmp = a[i+1]; ++ a[i+1] = a[i]; ++ a[i] = tmp; ++ } ++ } ++ } ++ ++ /* Take the average of the middle two */ ++ /* x = (a[TS_SAMPLES/2 - 1] + a[TS_SAMPLES/2] + a[TS_SAMPLES/2+1] + a[TS_SAMPLES/2+2]) >> 2; */ ++ x = a[TS_SAMPLES/2]; ++ ++ for(i = 0; i < TS_SAMPLES; i++) { ++ a[i] = SSDR_P(ts->port); ++ } ++ /* Sort them (bubble) */ ++ for(j = TS_SAMPLES - 1; j > 0; j--) { ++ for(i = 0; i < j; i++) { ++ if(a[i] > a[i + 1]) { ++ int tmp; ++ tmp = a[i+1]; ++ a[i+1] = a[i]; ++ a[i] = tmp; ++ } ++ } ++ } ++ ++ ++ /* Take the average of the middle two */ ++ /* y = (a[TS_SAMPLES/2 - 1] + a[TS_SAMPLES/2] + a[TS_SAMPLES/2+1] + a[TS_SAMPLES/2+2]) >> 2; */ ++ y = a[TS_SAMPLES/2]; ++ } else { ++ /* We have an error! Too many entries. */ ++ printk(KERN_ERR "TS: Expected %d entries. Got %d\n", TS_SAMPLES*2, number_of_entries_in_fifo); ++ /* Try to clear the FIFO */ ++ while(number_of_entries_in_fifo--) { ++ (void)SSDR_P(ts->port); ++ } ++ ++ if (ts->pen_down()) ++ start_read(ts); ++ ++ return; ++ } ++ } else { ++ /* Not ready yet. Come back later. */ ++ unsigned long inc = (poll_sample_time * HZ) / 1000; ++ mod_timer(&ts->timer, jiffies + inc); ++ return; ++ } ++ ++ /* ++ * Now we check to see if the pen is still down. If it is, then call ++ * start_read(). ++ */ ++ if (ts->pen_down()) ++ { ++ /* Still down */ ++ if(oldx != x || oldy != y) { ++ oldx = x; ++ oldy = y; ++ report_touchpanel(ts, 1, x, y); ++ } ++ start_read(ts); ++ } else { ++ /* Up */ ++ report_touchpanel(ts, 0, 0, 0); ++ irqblock = 0; ++ ts->state = STATE_WAIT_FOR_TOUCH; ++ /* Re-enable pen down interrupt */ ++ enable_irq(ts->irq); ++ } ++} ++ ++static int pen_down(void) ++{ ++ return ( asic3_get_gpio_status_a( &htcuniversal_asic3.dev ) & (1<dev.platform_data; ++ ++ printk("htcuniversal: ts_probe\n"); ++ ++ ts = ts_data = kmalloc (sizeof (*ts), GFP_KERNEL); ++ if (ts == NULL) { ++ printk( KERN_NOTICE "htcuniversal_ts: unable to allocate memory\n" ); ++ return -ENOMEM; ++ } ++ memset (ts, 0, sizeof (*ts)); ++ ++ ts->input = input_allocate_device(); ++ if (ts->input == NULL) { ++ printk( KERN_NOTICE "htcuniversal_ts: unable to allocation touchscreen input\n" ); ++ kfree(ts); ++ return -ENOMEM; ++ } ++ ts->input->evbit[0] = BIT(EV_ABS); ++ ts->input->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); ++ ts->input->absmin[ABS_X] = 0; ++ ts->input->absmax[ABS_X] = 32767; ++ ts->input->absmin[ABS_Y] = 0; ++ ts->input->absmax[ABS_Y] = 32767; ++ ts->input->absmin[ABS_PRESSURE] = 0; ++ ts->input->absmax[ABS_PRESSURE] = 1; ++ ++ ts->input->name = "htcuniversal_ts"; ++ ts->input->phys = "touchscreen/htcuniversal_ts"; ++ ts->input->private = ts; ++ ++ input_register_device(ts->input); ++ ++ ts->timer.function = ts_timer_callback; ++ ts->timer.data = (unsigned long)ts; ++ ts->state = STATE_WAIT_FOR_TOUCH; ++ init_timer (&ts->timer); ++ ++ platform_set_drvdata(dev, ts); ++ ++ ts->port=-1; ++ ++ if (mach) { ++ ts->port = mach->port; ++ ts->clock = mach->clock; ++ ts->pwrbit_X = mach->pwrbit_X; ++ ts->pwrbit_Y = mach->pwrbit_Y; ++ ++ /* static irq */ ++ if (mach->irq) ++ ts->irq = mach->irq; ++ ++ if (mach->pen_down) ++ ts->pen_down=mach->pen_down; ++ } ++ ++ if (ts->port == -1) ++ { ++ printk("tsc2046: your device is not supported by this driver\n"); ++ return -ENODEV; ++ } ++ ++ /* *** Initialize the SSP interface *** */ ++ ssp_init(ts->port, ts->clock); ++ ++ while(!(SSSR_P(ts->port) & SSSR_TNF)) ++ ; ++ SSDR_P(ts->port) = (TSC2046_SAMPLE_X|(ts->pwrbit_X))<<16; ++ ++ for(retval = 0; retval < 100; retval++) { ++ if(SSSR_P(ts->port) & SSSR_RNE) { ++ while(SSSR_P(ts->port) & SSSR_RNE) { ++ (void)SSDR_P(ts->port); ++ } ++ break; ++ } ++ mdelay(1); ++ } ++ ++ if (machine_is_htcuniversal() ) ++ { ++ ts->irq = asic3_irq_base( &htcuniversal_asic3.dev ) + ASIC3_GPIOA_IRQ_BASE + GPIOA_TOUCHSCREEN_N; ++ ts->pen_down=pen_down; ++ } ++ ++ retval = request_irq(ts->irq, pen_isr, IRQF_DISABLED, "tsc2046_ts", ts); ++ if(retval) { ++ printk("Unable to get interrupt\n"); ++ input_unregister_device (ts->input); ++ return -ENODEV; ++ } ++ set_irq_type(ts->irq, IRQ_TYPE_EDGE_FALLING); ++ ++ return 0; ++} ++ ++static int ++ts_remove (struct platform_device *dev) ++{ ++ struct touchscreen_data *ts = platform_get_drvdata(dev); ++ ++ input_unregister_device (ts->input); ++ del_timer_sync (&ts->timer); ++ free_irq (ts->irq, ts); ++ pxa_set_cken(ts->clock, 0); ++ ++ kfree(ts); ++ return 0; ++} ++ ++static int ++ts_suspend (struct platform_device *dev, pm_message_t state) ++{ ++ struct touchscreen_data *ts = platform_get_drvdata(dev); ++ ++ disable_irq(ts->irq); ++ ++ printk("htcuniversal_ts2_suspend: called.\n"); ++ return 0; ++} ++ ++static int ++ts_resume (struct platform_device *dev) ++{ ++ struct touchscreen_data *ts = platform_get_drvdata(dev); ++ ++ ts->state = STATE_WAIT_FOR_TOUCH; ++ ssp_init(ts->port, ts->clock); ++ enable_irq(ts->irq); ++ ++ printk("htcuniversal_ts2_resume: called.\n"); ++ return 0; ++} ++ ++static struct platform_driver ts_driver = { ++ .probe = ts_probe, ++ .remove = ts_remove, ++ .suspend = ts_suspend, ++ .resume = ts_resume, ++ .driver = { ++ .name = "htcuniversal_ts", ++ }, ++}; ++ ++ ++static int ++ts_module_init (void) ++{ ++ printk(KERN_NOTICE "HTC Universal Touch Screen Driver\n"); ++ ++ return platform_driver_register(&ts_driver); ++} ++ ++static void ++ts_module_cleanup (void) ++{ ++ platform_driver_unregister (&ts_driver); ++} ++ ++module_init(ts_module_init); ++module_exit(ts_module_cleanup); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Aric Blumer, SDG Systems, LLC"); ++MODULE_DESCRIPTION("HTC Universal Touch Screen Driver"); +Index: linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/htcuniversal/htcuniversal_udc.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,71 @@ ++ ++/* ++ * ++ * htcuniversal_udc.c: ++ * htcuniversal specific code for the pxa27x usb device controller. ++ * ++ * Use consistent with the GNU GPL is permitted. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static void htcuniversal_udc_command(int cmd) ++{ ++ switch (cmd) { ++ case PXA2XX_UDC_CMD_DISCONNECT: ++ asic3_set_gpio_out_b(&htcuniversal_asic3.dev, ++ 1< ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include "leds.h" ++ ++#include ++#include ++#include ++#include ++ ++#ifdef DEBUG ++#define dbg(msg, ...) printk(msg, __VA_ARGS__) ++#else ++#define dbg(msg, ...) ++#endif ++ ++static ++void asic3_leds_set(struct led_classdev *led_cdev, enum led_brightness b) ++{ ++ struct asic3_led *led = container_of(led_cdev, struct asic3_led, ++ led_cdev); ++ struct asic3_leds_machinfo *machinfo = led->machinfo; ++ struct device *asic3_dev = &machinfo->asic3_pdev->dev; ++ ++ dbg("%s:%s %d(%d)-%s %d\n", __FILE__, __FUNCTION__, led->hw_num, ++ led->gpio_num, led->led_cdev.name, b); ++ ++ if (led->hw_num == -1) { ++ asic3_gpio_set_value(asic3_dev, led->gpio_num, b); ++ return; ++ } ++ ++ if (b == LED_OFF) { ++ asic3_set_led(asic3_dev, led->hw_num, 0, 16, 6); ++ asic3_set_gpio_out_c(asic3_dev, led->hw_num, 0); ++ } ++ else { ++ asic3_set_gpio_out_c(asic3_dev, led->hw_num, led->hw_num); ++ #ifdef CONFIG_LEDS_TRIGGER_HWTIMER ++ if (led_cdev->trigger && led_cdev->trigger->is_led_supported && ++ (led_cdev->trigger->is_led_supported(led_cdev) & ++ LED_SUPPORTS_HWTIMER)) { ++ struct hwtimer_data *td = led_cdev->trigger_data; ++ if (!td) return; ++ asic3_set_led(asic3_dev, led->hw_num, td->delay_on/8, ++ (td->delay_on + td->delay_off)/8, 6); ++ } ++ else ++ #endif ++ asic3_set_led(asic3_dev, led->hw_num, 16, 16, 6); ++ } ++ ++ return; ++} ++ ++static ++int asic3_leds_probe(struct platform_device *pdev) ++{ ++ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; ++ struct asic3_led *leds = machinfo->leds; ++ int ret, i = 0; ++ ++ dbg("%s:%s\n", __FILE__, __FUNCTION__); ++ ++ // Turn on clocks early, for the case if trigger would enable ++ // led immediately after led_classdev_register(). ++ asic3_set_clock_cdex(&machinfo->asic3_pdev->dev, ++ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2, ++ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2); ++ ++ for (i = 0; i < machinfo->num_leds; i++) { ++ leds[i].machinfo = machinfo; ++ leds[i].led_cdev.brightness_set = asic3_leds_set; ++ ret = led_classdev_register(&pdev->dev, &leds[i].led_cdev); ++ if (ret) { ++ printk(KERN_ERR "Error: can't register %s led\n", ++ leds[i].led_cdev.name); ++ goto out_err; ++ } ++ } ++ ++ return 0; ++ ++out_err: ++ while (--i >= 0) led_classdev_unregister(&leds[i].led_cdev); ++ ++ asic3_set_clock_cdex(&machinfo->asic3_pdev->dev, ++ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2, ++ 0 | 0 | 0); ++ ++ return ret; ++} ++ ++static ++int asic3_leds_remove(struct platform_device *pdev) ++{ ++ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; ++ struct asic3_led *leds = machinfo->leds; ++ int i = 0; ++ ++ dbg("%s:%s\n", __FILE__, __FUNCTION__); ++ ++ for (i = 0; i < machinfo->num_leds; i++) ++ led_classdev_unregister(&leds[i].led_cdev); ++ ++ asic3_set_clock_cdex(&machinfo->asic3_pdev->dev, ++ CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2, ++ 0 | 0 | 0); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++ ++static ++int asic3_leds_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; ++ struct asic3_led *leds = machinfo->leds; ++ int i = 0; ++ ++ dbg("%s:%s\n", __FILE__, __FUNCTION__); ++ ++ for (i = 0; i < machinfo->num_leds; i++) ++ led_classdev_suspend(&leds[i].led_cdev); ++ ++ return 0; ++} ++ ++static ++int asic3_leds_resume(struct platform_device *pdev) ++{ ++ struct asic3_leds_machinfo *machinfo = pdev->dev.platform_data; ++ struct asic3_led *leds = machinfo->leds; ++ int i = 0; ++ ++ dbg("%s:%s\n", __FILE__, __FUNCTION__); ++ ++ for (i = 0; i < machinfo->num_leds; i++) ++ led_classdev_resume(&leds[i].led_cdev); ++ ++ return 0; ++} ++ ++#endif ++ ++static ++struct platform_driver asic3_leds_driver = { ++ .probe = asic3_leds_probe, ++ .remove = asic3_leds_remove, ++#ifdef CONFIG_PM ++ .suspend = asic3_leds_suspend, ++ .resume = asic3_leds_resume, ++#endif ++ .driver = { ++ .name = "asic3-leds", ++ }, ++}; ++ ++int asic3_leds_register(void) ++{ ++ dbg("%s:%s\n", __FILE__, __FUNCTION__); ++ return platform_driver_register(&asic3_leds_driver); ++} ++ ++void asic3_leds_unregister(void) ++{ ++ platform_driver_unregister(&asic3_leds_driver); ++ return; ++} ++ ++EXPORT_SYMBOL_GPL(asic3_leds_register); ++EXPORT_SYMBOL_GPL(asic3_leds_unregister); ++ ++MODULE_AUTHOR("Anton Vorontsov "); ++MODULE_DESCRIPTION("HTC ASIC3 LEDs driver"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/drivers/mfd/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/mfd/Kconfig 2008-01-20 18:59:38.000000000 +0000 ++++ linux-2.6.23/drivers/mfd/Kconfig 2008-01-20 18:59:46.000000000 +0000 +@@ -21,6 +21,16 @@ config MFD_TSC2101 + help + Support for TI TSC2101 Touchscreen and Audio Codec + ++config HTC_ASIC3 ++ tristate "HTC ASIC3 (iPAQ h1900/h3900/h4000/hx4700/rx3000) support" ++ ++config HTC_ASIC3_DS1WM ++ bool "Support HTC ASIC3 builtin DS1WM block" ++ help ++ Choose Y here if you want to include support for ASIC3's builtin ++ W1 controller. Some devices do not use it, and yet other have ++ separate DS1WM controller. For them, choose N. ++ + endmenu + + menu "Multimedia Capabilities Port drivers" +Index: linux-2.6.23/drivers/mfd/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/mfd/Makefile 2008-01-20 18:59:38.000000000 +0000 ++++ linux-2.6.23/drivers/mfd/Makefile 2008-01-20 18:59:46.000000000 +0000 +@@ -2,6 +2,8 @@ + # Makefile for multifunction miscellaneous devices + # + ++obj-$(CONFIG_HTC_ASIC3) += asic3_base.o soc-core.o ++ + obj-$(CONFIG_MFD_SM501) += sm501.o + + obj-$(CONFIG_MCP) += mcp-core.o +Index: linux-2.6.23/drivers/mfd/asic3_base.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/mfd/asic3_base.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,1208 @@ ++/* ++ * Driver interface to HTC "ASIC3" ++ * ++ * Copyright 2001 Compaq Computer Corporation. ++ * Copyright 2004-2005 Phil Blundell ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, ++ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS ++ * FITNESS FOR ANY PARTICULAR PURPOSE. ++ * ++ * Author: Andrew Christian ++ * ++ * October 2001 ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include "soc-core.h" ++ ++ ++struct asic3_data { ++ void *mapping; ++ unsigned int bus_shift; ++ int irq_base; ++ int irq_nr; ++ ++ u16 irq_bothedge[4]; ++ struct device *dev; ++ ++ struct platform_device *mmc_dev; ++}; ++ ++static DEFINE_SPINLOCK(asic3_gpio_lock); ++ ++static int asic3_remove(struct platform_device *dev); ++ ++static inline unsigned long asic3_address(struct device *dev, ++ unsigned int reg) ++{ ++ struct asic3_data *adata; ++ ++ adata = (struct asic3_data *)dev->driver_data; ++ ++ return (unsigned long)adata->mapping + (reg >> (2 - adata->bus_shift)); ++} ++ ++void asic3_write_register(struct device *dev, unsigned int reg, u32 value) ++{ ++ __raw_writew(value, asic3_address(dev, reg)); ++} ++EXPORT_SYMBOL(asic3_write_register); ++ ++u32 asic3_read_register(struct device *dev, unsigned int reg) ++{ ++ return __raw_readw(asic3_address(dev, reg)); ++} ++EXPORT_SYMBOL(asic3_read_register); ++ ++static inline void __asic3_write_register(struct asic3_data *asic, ++ unsigned int reg, u32 value) ++{ ++ __raw_writew(value, (unsigned long)asic->mapping ++ + (reg >> (2 - asic->bus_shift))); ++} ++ ++static inline u32 __asic3_read_register(struct asic3_data *asic, ++ unsigned int reg) ++{ ++ return __raw_readw((unsigned long)asic->mapping ++ + (reg >> (2 - asic->bus_shift))); ++} ++ ++#define ASIC3_GPIO_FN(get_fn_name, set_fn_name, REG) \ ++u32 get_fn_name(struct device *dev) \ ++{ \ ++ return asic3_read_register(dev, REG); \ ++} \ ++EXPORT_SYMBOL(get_fn_name); \ ++ \ ++void set_fn_name(struct device *dev, u32 bits, u32 val) \ ++{ \ ++ unsigned long flags; \ ++ \ ++ spin_lock_irqsave(&asic3_gpio_lock, flags); \ ++ val |= (asic3_read_register(dev, REG) & ~bits); \ ++ asic3_write_register(dev, REG, val); \ ++ spin_unlock_irqrestore(&asic3_gpio_lock, flags); \ ++} \ ++EXPORT_SYMBOL(set_fn_name); ++ ++#define ASIC3_GPIO_REGISTER(ACTION, action, fn, FN) \ ++ ASIC3_GPIO_FN(asic3_get_gpio_ ## action ## _ ## fn , \ ++ asic3_set_gpio_ ## action ## _ ## fn , \ ++ _IPAQ_ASIC3_GPIO_ ## FN ## _Base \ ++ + _IPAQ_ASIC3_GPIO_ ## ACTION ) ++ ++#define ASIC3_GPIO_FUNCTIONS(fn, FN) \ ++ ASIC3_GPIO_REGISTER(Direction, dir, fn, FN) \ ++ ASIC3_GPIO_REGISTER(Out, out, fn, FN) \ ++ ASIC3_GPIO_REGISTER(SleepMask, sleepmask, fn, FN) \ ++ ASIC3_GPIO_REGISTER(SleepOut, sleepout, fn, FN) \ ++ ASIC3_GPIO_REGISTER(BattFaultOut, battfaultout, fn, FN) \ ++ ASIC3_GPIO_REGISTER(AltFunction, alt_fn, fn, FN) \ ++ ASIC3_GPIO_REGISTER(SleepConf, sleepconf, fn, FN) \ ++ ASIC3_GPIO_REGISTER(Status, status, fn, FN) ++ ++#if 0 ++ ASIC3_GPIO_REGISTER(Mask, mask, fn, FN) ++ ASIC3_GPIO_REGISTER(TriggerType, trigtype, fn, FN) ++ ASIC3_GPIO_REGISTER(EdgeTrigger, rising, fn, FN) ++ ASIC3_GPIO_REGISTER(LevelTrigger, triglevel, fn, FN) ++ ASIC3_GPIO_REGISTER(IntStatus, intstatus, fn, FN) ++#endif ++ ++ASIC3_GPIO_FUNCTIONS(a, A) ++ASIC3_GPIO_FUNCTIONS(b, B) ++ASIC3_GPIO_FUNCTIONS(c, C) ++ASIC3_GPIO_FUNCTIONS(d, D) ++ ++int asic3_gpio_get_value(struct device *dev, unsigned gpio) ++{ ++ u32 mask = ASIC3_GPIO_bit(gpio); ++ printk("%s(%d)\n", __FUNCTION__, gpio); ++ switch (gpio >> 4) { ++ case _IPAQ_ASIC3_GPIO_BANK_A: ++ return asic3_get_gpio_status_a(dev) & mask; ++ case _IPAQ_ASIC3_GPIO_BANK_B: ++ return asic3_get_gpio_status_b(dev) & mask; ++ case _IPAQ_ASIC3_GPIO_BANK_C: ++ return asic3_get_gpio_status_c(dev) & mask; ++ case _IPAQ_ASIC3_GPIO_BANK_D: ++ return asic3_get_gpio_status_d(dev) & mask; ++ } ++ ++ printk(KERN_ERR "%s: invalid GPIO value 0x%x", __FUNCTION__, gpio); ++ return 0; ++} ++EXPORT_SYMBOL(asic3_gpio_get_value); ++ ++void asic3_gpio_set_value(struct device *dev, unsigned gpio, int val) ++{ ++ u32 mask = ASIC3_GPIO_bit(gpio); ++ u32 bitval = 0; ++ if (val) bitval = mask; ++ printk("%s(%d, %d)\n", __FUNCTION__, gpio, val); ++ ++ switch (gpio >> 4) { ++ case _IPAQ_ASIC3_GPIO_BANK_A: ++ asic3_set_gpio_out_a(dev, mask, bitval); ++ return; ++ case _IPAQ_ASIC3_GPIO_BANK_B: ++ asic3_set_gpio_out_b(dev, mask, bitval); ++ return; ++ case _IPAQ_ASIC3_GPIO_BANK_C: ++ asic3_set_gpio_out_c(dev, mask, bitval); ++ return; ++ case _IPAQ_ASIC3_GPIO_BANK_D: ++ asic3_set_gpio_out_d(dev, mask, bitval); ++ return; ++ } ++ ++ printk(KERN_ERR "%s: invalid GPIO value 0x%x", __FUNCTION__, gpio); ++} ++EXPORT_SYMBOL(asic3_gpio_set_value); ++ ++int asic3_irq_base(struct device *dev) ++{ ++ struct asic3_data *asic = dev->driver_data; ++ ++ return asic->irq_base; ++} ++EXPORT_SYMBOL(asic3_irq_base); ++ ++static int asic3_gpio_to_irq(struct device *dev, unsigned gpio) ++{ ++ struct asic3_data *asic = dev->driver_data; ++ printk("%s(%d)\n", __FUNCTION__, gpio); ++ ++ return asic->irq_base + gpio; ++} ++ ++void asic3_set_led(struct device *dev, int led_num, int duty_time, ++ int cycle_time, int timebase) ++{ ++ struct asic3_data *asic = dev->driver_data; ++ unsigned int led_base; ++ ++ /* it's a macro thing: see #define _IPAQ_ASIC_LED_0_Base for why you ++ * can't substitute led_num in the macros below... ++ */ ++ ++ switch (led_num) { ++ case 0: ++ led_base = _IPAQ_ASIC3_LED_0_Base; ++ break; ++ case 1: ++ led_base = _IPAQ_ASIC3_LED_1_Base; ++ break; ++ case 2: ++ led_base = _IPAQ_ASIC3_LED_2_Base; ++ break; ++ default: ++ printk(KERN_ERR "%s: invalid led number %d", __FUNCTION__, ++ led_num); ++ return; ++ } ++ ++ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_TimeBase, ++ timebase | LED_EN); ++ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_PeriodTime, ++ cycle_time); ++ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_DutyTime, ++ 0); ++ udelay(20); /* asic voodoo - possibly need a whole duty cycle? */ ++ __asic3_write_register(asic, led_base + _IPAQ_ASIC3_LED_DutyTime, ++ duty_time); ++} ++EXPORT_SYMBOL(asic3_set_led); ++ ++void asic3_set_clock_sel(struct device *dev, u32 bits, u32 val) ++{ ++ struct asic3_data *asic = dev->driver_data; ++ unsigned long flags; ++ u32 v; ++ ++ spin_lock_irqsave(&asic3_gpio_lock, flags); ++ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL)); ++ v = (v & ~bits) | val; ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), v); ++ spin_unlock_irqrestore(&asic3_gpio_lock, flags); ++} ++EXPORT_SYMBOL(asic3_set_clock_sel); ++ ++void asic3_set_clock_cdex(struct device *dev, u32 bits, u32 val) ++{ ++ struct asic3_data *asic = dev->driver_data; ++ unsigned long flags; ++ u32 v; ++ ++ spin_lock_irqsave(&asic3_gpio_lock, flags); ++ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX)); ++ v = (v & ~bits) | val; ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), v); ++ spin_unlock_irqrestore(&asic3_gpio_lock, flags); ++} ++EXPORT_SYMBOL(asic3_set_clock_cdex); ++ ++static void asic3_clock_cdex_enable(struct clk *clk) ++{ ++ struct asic3_data *asic = (struct asic3_data *)clk->parent->ctrlbit; ++ unsigned long flags, val; ++ ++ local_irq_save(flags); ++ ++ val = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX)); ++ val |= clk->ctrlbit; ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), val); ++ ++ local_irq_restore(flags); ++} ++ ++static void asic3_clock_cdex_disable(struct clk *clk) ++{ ++ struct asic3_data *asic = (struct asic3_data *)clk->parent->ctrlbit; ++ unsigned long flags, val; ++ ++ local_irq_save(flags); ++ ++ val = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX)); ++ val &= ~clk->ctrlbit; ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), val); ++ ++ local_irq_restore(flags); ++} ++ ++/* base clocks */ ++ ++static struct clk clk_g = { ++ .name = "gclk", ++ .rate = 0, ++ .parent = NULL, ++}; ++ ++/* clock definitions */ ++ ++static struct clk asic3_clocks[] = { ++ { ++ .name = "spi", ++ .id = -1, ++ .parent = &clk_g, ++ .enable = asic3_clock_cdex_enable, ++ .disable = asic3_clock_cdex_disable, ++ .ctrlbit = CLOCK_CDEX_SPI, ++ }, ++#ifdef CONFIG_HTC_ASIC3_DS1WM ++ { ++ .name = "ds1wm", ++ .id = -1, ++ .rate = 5000000, ++ .parent = &clk_g, ++ .enable = asic3_clock_cdex_enable, ++ .disable = asic3_clock_cdex_disable, ++ .ctrlbit = CLOCK_CDEX_OWM, ++ }, ++#endif ++ { ++ .name = "pwm0", ++ .id = -1, ++ .parent = &clk_g, ++ .enable = asic3_clock_cdex_enable, ++ .disable = asic3_clock_cdex_disable, ++ .ctrlbit = CLOCK_CDEX_PWM0, ++ }, ++ { ++ .name = "pwm1", ++ .id = -1, ++ .parent = &clk_g, ++ .enable = asic3_clock_cdex_enable, ++ .disable = asic3_clock_cdex_disable, ++ .ctrlbit = CLOCK_CDEX_PWM1, ++ }, ++ { ++ .name = "led0", ++ .id = -1, ++ .parent = &clk_g, ++ .enable = asic3_clock_cdex_enable, ++ .disable = asic3_clock_cdex_disable, ++ .ctrlbit = CLOCK_CDEX_LED0, ++ }, ++ { ++ .name = "led1", ++ .id = -1, ++ .parent = &clk_g, ++ .enable = asic3_clock_cdex_enable, ++ .disable = asic3_clock_cdex_disable, ++ .ctrlbit = CLOCK_CDEX_LED1, ++ }, ++ { ++ .name = "led2", ++ .id = -1, ++ .parent = &clk_g, ++ .enable = asic3_clock_cdex_enable, ++ .disable = asic3_clock_cdex_disable, ++ .ctrlbit = CLOCK_CDEX_LED2, ++ }, ++ { ++ .name = "smbus", ++ .id = -1, ++ .parent = &clk_g, ++ .enable = asic3_clock_cdex_enable, ++ .disable = asic3_clock_cdex_disable, ++ .ctrlbit = CLOCK_CDEX_SMBUS, ++ }, ++ { ++ .name = "ex0", ++ .id = -1, ++ .parent = &clk_g, ++ .enable = asic3_clock_cdex_enable, ++ .disable = asic3_clock_cdex_disable, ++ .ctrlbit = CLOCK_CDEX_EX0, ++ }, ++ { ++ .name = "ex1", ++ .id = -1, ++ .parent = &clk_g, ++ .enable = asic3_clock_cdex_enable, ++ .disable = asic3_clock_cdex_disable, ++ .ctrlbit = CLOCK_CDEX_EX1, ++ }, ++}; ++ ++void asic3_set_extcf_select(struct device *dev, u32 bits, u32 val) ++{ ++ struct asic3_data *asic = dev->driver_data; ++ unsigned long flags; ++ u32 v; ++ ++ spin_lock_irqsave(&asic3_gpio_lock, flags); ++ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Select)); ++ v = (v & ~bits) | val; ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Select), v); ++ spin_unlock_irqrestore(&asic3_gpio_lock, flags); ++} ++EXPORT_SYMBOL(asic3_set_extcf_select); ++ ++void asic3_set_extcf_reset(struct device *dev, u32 bits, u32 val) ++{ ++ struct asic3_data *asic = dev->driver_data; ++ unsigned long flags; ++ u32 v; ++ ++ spin_lock_irqsave(&asic3_gpio_lock, flags); ++ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Reset)); ++ v = (v & ~bits) | val; ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(EXTCF, Reset), v); ++ spin_unlock_irqrestore(&asic3_gpio_lock, flags); ++} ++EXPORT_SYMBOL(asic3_set_extcf_reset); ++ ++void asic3_set_sdhwctrl(struct device *dev, u32 bits, u32 val) ++{ ++ struct asic3_data *asic = dev->driver_data; ++ unsigned long flags; ++ u32 v; ++ ++ spin_lock_irqsave (&asic3_gpio_lock, flags); ++ v = __asic3_read_register(asic, IPAQ_ASIC3_OFFSET(SDHWCTRL, SDConf)); ++ v = (v & ~bits) | val; ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(SDHWCTRL, SDConf), v); ++ spin_unlock_irqrestore(&asic3_gpio_lock, flags); ++} ++EXPORT_SYMBOL(asic3_set_sdhwctrl); ++ ++ ++#define MAX_ASIC_ISR_LOOPS 20 ++#define _IPAQ_ASIC3_GPIO_Base_INCR \ ++ (_IPAQ_ASIC3_GPIO_B_Base - _IPAQ_ASIC3_GPIO_A_Base) ++ ++static inline void asic3_irq_flip_edge(struct asic3_data *asic, ++ u32 base, int bit) ++{ ++ u16 edge = __asic3_read_register(asic, ++ base + _IPAQ_ASIC3_GPIO_EdgeTrigger); ++ edge ^= bit; ++ __asic3_write_register(asic, ++ base + _IPAQ_ASIC3_GPIO_EdgeTrigger, edge); ++} ++ ++static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc) ++{ ++ int iter; ++ struct asic3_data *asic; ++ ++ /* Acknowledge the parrent (i.e. CPU's) IRQ */ ++ desc->chip->ack(irq); ++ ++ asic = desc->handler_data; ++ ++ /* printk( KERN_NOTICE "asic3_irq_demux: irq=%d\n", irq ); */ ++ for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) { ++ u32 status; ++ int bank; ++ ++ status = __asic3_read_register(asic, ++ IPAQ_ASIC3_OFFSET(INTR, PIntStat)); ++ /* Check all ten register bits */ ++ if ((status & 0x3ff) == 0) ++ break; ++ ++ /* Handle GPIO IRQs */ ++ for (bank = 0; bank < 4; bank++) { ++ if (status & (1 << bank)) { ++ unsigned long base, i, istat; ++ ++ base = _IPAQ_ASIC3_GPIO_A_Base ++ + bank * _IPAQ_ASIC3_GPIO_Base_INCR; ++ istat = __asic3_read_register(asic, ++ base + _IPAQ_ASIC3_GPIO_IntStatus); ++ /* IntStatus is write 0 to clear */ ++ /* XXX could miss interrupts! */ ++ __asic3_write_register(asic, ++ base + _IPAQ_ASIC3_GPIO_IntStatus, 0); ++ ++ for (i = 0; i < 16; i++) { ++ int bit = (1 << i); ++ unsigned int irqnr; ++ if (!(istat & bit)) ++ continue; ++ ++ irqnr = asic->irq_base ++ + (16 * bank) + i; ++ desc = irq_desc + irqnr; ++ desc->handle_irq(irqnr, desc); ++ if (asic->irq_bothedge[bank] & bit) { ++ asic3_irq_flip_edge(asic, base, ++ bit); ++ } ++ } ++ } ++ } ++ ++ /* Handle remaining IRQs in the status register */ ++ { ++ int i; ++ ++ for (i = ASIC3_LED0_IRQ; i <= ASIC3_OWM_IRQ; i++) { ++ /* They start at bit 4 and go up */ ++ if (status & (1 << (i - ASIC3_LED0_IRQ + 4))) { ++ desc = irq_desc + asic->irq_base + i; ++ desc->handle_irq(asic->irq_base + i, ++ desc); ++ } ++ } ++ } ++ ++ } ++ ++ if (iter >= MAX_ASIC_ISR_LOOPS) ++ printk(KERN_ERR "%s: interrupt processing overrun\n", ++ __FUNCTION__); ++} ++ ++static inline int asic3_irq_to_bank(struct asic3_data *asic, int irq) ++{ ++ int n; ++ ++ n = (irq - asic->irq_base) >> 4; ++ ++ return (n * (_IPAQ_ASIC3_GPIO_B_Base - _IPAQ_ASIC3_GPIO_A_Base)); ++} ++ ++static inline int asic3_irq_to_index(struct asic3_data *asic, int irq) ++{ ++ return (irq - asic->irq_base) & 15; ++} ++ ++static void asic3_mask_gpio_irq(unsigned int irq) ++{ ++ struct asic3_data *asic = get_irq_chip_data(irq); ++ u32 val, bank, index; ++ unsigned long flags; ++ ++ bank = asic3_irq_to_bank(asic, irq); ++ index = asic3_irq_to_index(asic, irq); ++ ++ spin_lock_irqsave(&asic3_gpio_lock, flags); ++ val = __asic3_read_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask); ++ val |= 1 << index; ++ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask, val); ++ spin_unlock_irqrestore(&asic3_gpio_lock, flags); ++} ++ ++static void asic3_mask_irq(unsigned int irq) ++{ ++ struct asic3_data *asic = get_irq_chip_data(irq); ++ int regval; ++ ++ if (irq < ASIC3_NR_GPIO_IRQS) { ++ printk(KERN_ERR "asic3_base: gpio mask attempt, irq %d\n", ++ irq); ++ return; ++ } ++ ++ regval = __asic3_read_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask); ++ ++ switch (irq - asic->irq_base) { ++ case ASIC3_LED0_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval & ~ASIC3_INTMASK_MASK0); ++ break; ++ case ASIC3_LED1_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval & ~ASIC3_INTMASK_MASK1); ++ break; ++ case ASIC3_LED2_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval & ~ASIC3_INTMASK_MASK2); ++ break; ++ case ASIC3_SPI_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval & ~ASIC3_INTMASK_MASK3); ++ break; ++ case ASIC3_SMBUS_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval & ~ASIC3_INTMASK_MASK4); ++ break; ++ case ASIC3_OWM_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval & ~ASIC3_INTMASK_MASK5); ++ break; ++ default: ++ printk(KERN_ERR "asic3_base: bad non-gpio irq %d\n", irq); ++ break; ++ } ++} ++ ++static void asic3_unmask_gpio_irq(unsigned int irq) ++{ ++ struct asic3_data *asic = get_irq_chip_data(irq); ++ u32 val, bank, index; ++ unsigned long flags; ++ ++ bank = asic3_irq_to_bank(asic, irq); ++ index = asic3_irq_to_index(asic, irq); ++ ++ spin_lock_irqsave(&asic3_gpio_lock, flags); ++ val = __asic3_read_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask); ++ val &= ~(1 << index); ++ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_Mask, val); ++ spin_unlock_irqrestore(&asic3_gpio_lock, flags); ++} ++ ++static void asic3_unmask_irq(unsigned int irq) ++{ ++ struct asic3_data *asic = get_irq_chip_data(irq); ++ int regval; ++ ++ if (irq < ASIC3_NR_GPIO_IRQS) { ++ printk(KERN_ERR "asic3_base: gpio unmask attempt, irq %d\n", ++ irq); ++ return; ++ } ++ ++ regval = __asic3_read_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask); ++ ++ switch (irq - asic->irq_base) { ++ case ASIC3_LED0_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval | ASIC3_INTMASK_MASK0); ++ break; ++ case ASIC3_LED1_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval | ASIC3_INTMASK_MASK1); ++ break; ++ case ASIC3_LED2_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval | ASIC3_INTMASK_MASK2); ++ break; ++ case ASIC3_SPI_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval | ASIC3_INTMASK_MASK3); ++ break; ++ case ASIC3_SMBUS_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval | ASIC3_INTMASK_MASK4); ++ break; ++ case ASIC3_OWM_IRQ: ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_INTR_Base + _IPAQ_ASIC3_INTR_IntMask, ++ regval | ASIC3_INTMASK_MASK5); ++ break; ++ default: ++ printk(KERN_ERR "asic3_base: bad non-gpio irq %d\n", irq); ++ break; ++ } ++} ++ ++static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) ++{ ++ struct asic3_data *asic = get_irq_chip_data(irq); ++ u32 bank, index; ++ unsigned long flags; ++ u16 trigger, level, edge, bit; ++ ++ bank = asic3_irq_to_bank(asic, irq); ++ index = asic3_irq_to_index(asic, irq); ++ bit = 1<irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit; ++ ++ if (type == IRQT_RISING) { ++ trigger |= bit; ++ edge |= bit; ++ } else if (type == IRQT_FALLING) { ++ trigger |= bit; ++ edge &= ~bit; ++ } else if (type == IRQT_BOTHEDGE) { ++ trigger |= bit; ++ if (asic3_gpio_get_value(asic->dev, irq - asic->irq_base)) ++ edge &= ~bit; ++ else ++ edge |= bit; ++ asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit; ++ } else if (type == IRQT_LOW) { ++ trigger &= ~bit; ++ level &= ~bit; ++ } else if (type == IRQT_HIGH) { ++ trigger &= ~bit; ++ level |= bit; ++ } else { ++ /* ++ * if type == IRQT_NOEDGE, we should mask interrupts, but ++ * be careful to not unmask them if mask was also called. ++ * Probably need internal state for mask. ++ */ ++ printk(KERN_NOTICE "asic3: irq type not changed.\n"); ++ } ++ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_LevelTrigger, ++ level); ++ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_EdgeTrigger, ++ edge); ++ __asic3_write_register(asic, bank + _IPAQ_ASIC3_GPIO_TriggerType, ++ trigger); ++ spin_unlock_irqrestore(&asic3_gpio_lock, flags); ++ return 0; ++} ++ ++static struct irq_chip asic3_gpio_irq_chip = { ++ .name = "ASIC3-GPIO", ++ .ack = asic3_mask_gpio_irq, ++ .mask = asic3_mask_gpio_irq, ++ .unmask = asic3_unmask_gpio_irq, ++ .set_type = asic3_gpio_irq_type, ++}; ++ ++static struct irq_chip asic3_irq_chip = { ++ .name = "ASIC3", ++ .ack = asic3_mask_irq, ++ .mask = asic3_mask_irq, ++ .unmask = asic3_unmask_irq, ++}; ++ ++static void asic3_release(struct device *dev) ++{ ++ struct platform_device *sdev = to_platform_device(dev); ++ ++ kfree(sdev->resource); ++ kfree(sdev); ++} ++ ++int asic3_register_mmc(struct device *dev) ++{ ++ struct platform_device *sdev = kzalloc(sizeof(*sdev), GFP_KERNEL); ++ struct tmio_mmc_hwconfig *mmc_config = kmalloc(sizeof(*mmc_config), ++ GFP_KERNEL); ++ struct platform_device *pdev = to_platform_device(dev); ++ struct asic3_data *asic = dev->driver_data; ++ struct asic3_platform_data *asic3_pdata = dev->platform_data; ++ struct resource *res; ++ int rc; ++ ++ if (sdev == NULL || mmc_config == NULL) ++ return -ENOMEM; ++ ++ if (asic3_pdata->tmio_mmc_hwconfig) { ++ memcpy(mmc_config, asic3_pdata->tmio_mmc_hwconfig, ++ sizeof(*mmc_config)); ++ } else { ++ memset(mmc_config, 0, sizeof(*mmc_config)); ++ } ++ mmc_config->address_shift = asic->bus_shift; ++ ++ sdev->id = -1; ++ sdev->name = "asic3_mmc"; ++ sdev->dev.parent = dev; ++ sdev->num_resources = 2; ++ sdev->dev.platform_data = mmc_config; ++ sdev->dev.release = asic3_release; ++ ++ res = kzalloc(sdev->num_resources * sizeof(struct resource), ++ GFP_KERNEL); ++ if (res == NULL) { ++ kfree(sdev); ++ kfree(mmc_config); ++ return -ENOMEM; ++ } ++ sdev->resource = res; ++ ++ res[0].start = pdev->resource[2].start; ++ res[0].end = pdev->resource[2].end; ++ res[0].flags = IORESOURCE_MEM; ++ res[1].start = res[1].end = pdev->resource[3].start; ++ res[1].flags = IORESOURCE_IRQ; ++ ++ rc = platform_device_register(sdev); ++ if (rc) { ++ printk(KERN_ERR "asic3_base: " ++ "Could not register asic3_mmc device\n"); ++ kfree(res); ++ kfree(sdev); ++ return rc; ++ } ++ ++ asic->mmc_dev = sdev; ++ ++ return 0; ++} ++EXPORT_SYMBOL(asic3_register_mmc); ++ ++int asic3_unregister_mmc(struct device *dev) ++{ ++ struct asic3_data *asic = dev->driver_data; ++ platform_device_unregister(asic->mmc_dev); ++ asic->mmc_dev = 0; ++ ++ return 0; ++} ++EXPORT_SYMBOL(asic3_unregister_mmc); ++ ++#ifdef CONFIG_HTC_ASIC3_DS1WM ++/* ++ * DS1WM subdevice ++ */ ++ ++static void asic3_ds1wm_enable(struct platform_device *ds1wm_dev) ++{ ++ struct device *dev = ds1wm_dev->dev.parent; ++ ++ /* Turn on external clocks and the OWM clock */ ++ asic3_set_clock_cdex(dev, ++ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM, ++ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM); ++ ++ mdelay(1); ++ ++ asic3_set_extcf_reset(dev, ASIC3_EXTCF_OWM_RESET, ++ ASIC3_EXTCF_OWM_RESET); ++ mdelay(1); ++ asic3_set_extcf_reset(dev, ASIC3_EXTCF_OWM_RESET, 0); ++ mdelay(1); ++ ++ /* Clear OWM_SMB, set OWM_EN */ ++ asic3_set_extcf_select(dev, ++ ASIC3_EXTCF_OWM_SMB | ASIC3_EXTCF_OWM_EN, ++ 0 | ASIC3_EXTCF_OWM_EN); ++ ++ mdelay(1); ++} ++ ++static void asic3_ds1wm_disable(struct platform_device *ds1wm_dev) ++{ ++ struct device *dev = ds1wm_dev->dev.parent; ++ ++ asic3_set_extcf_select(dev, ++ ASIC3_EXTCF_OWM_SMB | ASIC3_EXTCF_OWM_EN, ++ 0 | 0); ++ ++ asic3_set_clock_cdex(dev, ++ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | CLOCK_CDEX_OWM, ++ CLOCK_CDEX_EX0 | CLOCK_CDEX_EX1 | 0); ++} ++ ++ ++static struct resource asic3_ds1wm_resources[] = { ++ { ++ .start = _IPAQ_ASIC3_OWM_Base, ++ .end = _IPAQ_ASIC3_OWM_Base + 0x14 - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = ASIC3_OWM_IRQ, ++ .end = ASIC3_OWM_IRQ, ++ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | ++ IORESOURCE_IRQ_SOC_SUBDEVICE, ++ }, ++}; ++ ++static struct ds1wm_platform_data ds1wm_pd = { ++ .enable = asic3_ds1wm_enable, ++ .disable = asic3_ds1wm_disable, ++}; ++#endif ++ ++static struct soc_device_data asic3_blocks[] = { ++#ifdef CONFIG_HTC_ASIC3_DS1WM ++ { ++ .name = "ds1wm", ++ .res = asic3_ds1wm_resources, ++ .num_resources = ARRAY_SIZE(asic3_ds1wm_resources), ++ .hwconfig = &ds1wm_pd, ++ }, ++#endif ++}; ++ ++static int asic3_probe(struct platform_device *pdev) ++{ ++ struct asic3_platform_data *pdata = pdev->dev.platform_data; ++ struct asic3_data *asic; ++ struct device *dev = &pdev->dev; ++ unsigned long clksel; ++ int i, rc; ++ ++ asic = kzalloc(sizeof(struct asic3_data), GFP_KERNEL); ++ if (!asic) ++ return -ENOMEM; ++ ++ platform_set_drvdata(pdev, asic); ++ asic->dev = &pdev->dev; ++ ++ asic->mapping = ioremap(pdev->resource[0].start, IPAQ_ASIC3_MAP_SIZE); ++ if (!asic->mapping) { ++ printk(KERN_ERR "asic3: couldn't ioremap ASIC3\n"); ++ kfree (asic); ++ return -ENOMEM; ++ } ++ ++ if (pdata && pdata->bus_shift) ++ asic->bus_shift = pdata->bus_shift; ++ else ++ asic->bus_shift = 2; ++ ++ /* XXX: should get correct SD clock values from pdata struct */ ++ clksel = 0; ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), clksel); ++ ++ /* Register ASIC3's clocks. */ ++ clk_g.ctrlbit = (int)asic; ++ ++ if (clk_register(&clk_g) < 0) ++ printk(KERN_ERR "asic3: failed to register ASIC3 gclk\n"); ++ ++ for (i = 0; i < ARRAY_SIZE(asic3_clocks); i++) { ++ rc = clk_register(&asic3_clocks[i]); ++ if (rc < 0) ++ printk(KERN_ERR "asic3: " ++ "failed to register clock %s (%d)\n", ++ asic3_clocks[i].name, rc); ++ } ++ ++ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(A, Mask), 0xffff); ++ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(B, Mask), 0xffff); ++ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(C, Mask), 0xffff); ++ __asic3_write_register(asic, IPAQ_ASIC3_GPIO_OFFSET(D, Mask), 0xffff); ++ ++ asic3_set_gpio_sleepmask_a(dev, 0xffff, 0xffff); ++ asic3_set_gpio_sleepmask_b(dev, 0xffff, 0xffff); ++ asic3_set_gpio_sleepmask_c(dev, 0xffff, 0xffff); ++ asic3_set_gpio_sleepmask_d(dev, 0xffff, 0xffff); ++ ++ if (pdata) { ++ asic3_set_gpio_out_a(dev, 0xffff, pdata->gpio_a.init); ++ asic3_set_gpio_out_b(dev, 0xffff, pdata->gpio_b.init); ++ asic3_set_gpio_out_c(dev, 0xffff, pdata->gpio_c.init); ++ asic3_set_gpio_out_d(dev, 0xffff, pdata->gpio_d.init); ++ ++ asic3_set_gpio_dir_a(dev, 0xffff, pdata->gpio_a.dir); ++ asic3_set_gpio_dir_b(dev, 0xffff, pdata->gpio_b.dir); ++ asic3_set_gpio_dir_c(dev, 0xffff, pdata->gpio_c.dir); ++ asic3_set_gpio_dir_d(dev, 0xffff, pdata->gpio_d.dir); ++ ++ asic3_set_gpio_sleepmask_a(dev, 0xffff, ++ pdata->gpio_a.sleep_mask); ++ asic3_set_gpio_sleepmask_b(dev, 0xffff, ++ pdata->gpio_b.sleep_mask); ++ asic3_set_gpio_sleepmask_c(dev, 0xffff, ++ pdata->gpio_c.sleep_mask); ++ asic3_set_gpio_sleepmask_d(dev, 0xffff, ++ pdata->gpio_d.sleep_mask); ++ ++ asic3_set_gpio_sleepout_a(dev, 0xffff, ++ pdata->gpio_a.sleep_out); ++ asic3_set_gpio_sleepout_b(dev, 0xffff, ++ pdata->gpio_b.sleep_out); ++ asic3_set_gpio_sleepout_c(dev, 0xffff, ++ pdata->gpio_c.sleep_out); ++ asic3_set_gpio_sleepout_d(dev, 0xffff, ++ pdata->gpio_d.sleep_out); ++ ++ asic3_set_gpio_battfaultout_a(dev, 0xffff, ++ pdata->gpio_a.batt_fault_out); ++ asic3_set_gpio_battfaultout_b(dev, 0xffff, ++ pdata->gpio_b.batt_fault_out); ++ asic3_set_gpio_battfaultout_c(dev, 0xffff, ++ pdata->gpio_c.batt_fault_out); ++ asic3_set_gpio_battfaultout_d(dev, 0xffff, ++ pdata->gpio_d.batt_fault_out); ++ ++ asic3_set_gpio_sleepconf_a(dev, 0xffff, ++ pdata->gpio_a.sleep_conf); ++ asic3_set_gpio_sleepconf_b(dev, 0xffff, ++ pdata->gpio_b.sleep_conf); ++ asic3_set_gpio_sleepconf_c(dev, 0xffff, ++ pdata->gpio_c.sleep_conf); ++ asic3_set_gpio_sleepconf_d(dev, 0xffff, ++ pdata->gpio_d.sleep_conf); ++ ++ asic3_set_gpio_alt_fn_a(dev, 0xffff, ++ pdata->gpio_a.alt_function); ++ asic3_set_gpio_alt_fn_b(dev, 0xffff, ++ pdata->gpio_b.alt_function); ++ asic3_set_gpio_alt_fn_c(dev, 0xffff, ++ pdata->gpio_c.alt_function); ++ asic3_set_gpio_alt_fn_d(dev, 0xffff, ++ pdata->gpio_d.alt_function); ++ } ++ ++ asic->irq_nr = -1; ++ asic->irq_base = -1; ++ ++ if (pdev->num_resources > 1) ++ asic->irq_nr = pdev->resource[1].start; ++ ++ if (asic->irq_nr != -1) { ++ unsigned int i; ++ ++ if (!pdata->irq_base) { ++ printk(KERN_ERR "asic3: IRQ base not specified\n"); ++ asic3_remove(pdev); ++ return -EINVAL; ++ } ++ ++ asic->irq_base = pdata->irq_base; ++ ++ /* turn on clock to IRQ controller */ ++ clksel |= CLOCK_SEL_CX; ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), ++ clksel); ++ ++ printk(KERN_INFO "asic3: using irq %d-%d on irq %d\n", ++ asic->irq_base, asic->irq_base + ASIC3_NR_IRQS - 1, ++ asic->irq_nr); ++ ++ for (i = 0 ; i < ASIC3_NR_IRQS ; i++) { ++ int irq = i + asic->irq_base; ++ if (i < ASIC3_NR_GPIO_IRQS) { ++ set_irq_chip(irq, &asic3_gpio_irq_chip); ++ set_irq_chip_data(irq, asic); ++ set_irq_handler(irq, handle_level_irq); ++ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); ++ } else { ++ /* The remaining IRQs are not GPIO */ ++ set_irq_chip(irq, &asic3_irq_chip); ++ set_irq_chip_data(irq, asic); ++ set_irq_handler(irq, handle_level_irq); ++ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); ++ } ++ } ++ ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), ++ ASIC3_INTMASK_GINTMASK); ++ ++ set_irq_chained_handler(asic->irq_nr, asic3_irq_demux); ++ set_irq_type(asic->irq_nr, IRQT_RISING); ++ set_irq_data(asic->irq_nr, asic); ++ } ++ ++#ifdef CONFIG_HTC_ASIC3_DS1WM ++ ds1wm_pd.bus_shift = asic->bus_shift; ++#endif ++ ++ pdata->gpiodev_ops.get = asic3_gpio_get_value; ++ pdata->gpiodev_ops.set = asic3_gpio_set_value; ++ pdata->gpiodev_ops.to_irq = asic3_gpio_to_irq; ++ ++ soc_add_devices(pdev, asic3_blocks, ARRAY_SIZE(asic3_blocks), ++ &pdev->resource[0], ++ asic->bus_shift - ASIC3_DEFAULT_ADDR_SHIFT, ++ asic->irq_base); ++ ++ if (pdev->num_resources > 2) { ++ int rc; ++ rc = asic3_register_mmc(dev); ++ if (rc) { ++ asic3_remove(pdev); ++ return rc; ++ } ++ } ++ ++ if (pdata && pdata->num_child_platform_devs != 0) ++ platform_add_devices(pdata->child_platform_devs, ++ pdata->num_child_platform_devs); ++ ++ return 0; ++} ++ ++static int asic3_remove(struct platform_device *pdev) ++{ ++ struct asic3_platform_data *pdata = pdev->dev.platform_data; ++ struct asic3_data *asic = platform_get_drvdata(pdev); ++ int i; ++ ++ if (pdata && pdata->num_child_platform_devs != 0) { ++ for (i = 0; i < pdata->num_child_platform_devs; i++) { ++ platform_device_unregister( ++ pdata->child_platform_devs[i]); ++ } ++ } ++ ++ if (asic->irq_nr != -1) { ++ unsigned int i; ++ ++ for (i = 0 ; i < ASIC3_NR_IRQS ; i++) { ++ int irq = i + asic->irq_base; ++ set_irq_flags(irq, 0); ++ set_irq_handler (irq, NULL); ++ set_irq_chip (irq, NULL); ++ set_irq_chip_data(irq, NULL); ++ } ++ ++ set_irq_chained_handler(asic->irq_nr, NULL); ++ } ++ ++ if (asic->mmc_dev) ++ asic3_unregister_mmc(&pdev->dev); ++ ++ for (i = 0; i < ARRAY_SIZE(asic3_clocks); i++) ++ clk_unregister(&asic3_clocks[i]); ++ clk_unregister(&clk_g); ++ ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, SEL), 0); ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), 0); ++ ++ iounmap(asic->mapping); ++ ++ kfree(asic); ++ ++ return 0; ++} ++ ++static void asic3_shutdown(struct platform_device *pdev) ++{ ++} ++ ++#define ASIC3_SUSPEND_CDEX_MASK \ ++ (CLOCK_CDEX_LED0 | CLOCK_CDEX_LED1 | CLOCK_CDEX_LED2) ++static unsigned short suspend_cdex; ++ ++static int asic3_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct asic3_data *asic = platform_get_drvdata(pdev); ++ suspend_cdex = __asic3_read_register(asic, ++ _IPAQ_ASIC3_CLOCK_Base + _IPAQ_ASIC3_CLOCK_CDEX); ++ /* The LEDs are still active during suspend */ ++ __asic3_write_register(asic, ++ _IPAQ_ASIC3_CLOCK_Base + _IPAQ_ASIC3_CLOCK_CDEX, ++ suspend_cdex & ASIC3_SUSPEND_CDEX_MASK); ++ return 0; ++} ++ ++static int asic3_resume(struct platform_device *pdev) ++{ ++ struct asic3_data *asic = platform_get_drvdata(pdev); ++ unsigned short intmask; ++ ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(CLOCK, CDEX), ++ suspend_cdex); ++ ++ if (asic->irq_nr != -1) { ++ /* Toggle the interrupt mask to try to get ASIC3 to show ++ * the CPU an interrupt edge. For more details see the ++ * kernel-discuss thread around 13 June 2005 with the ++ * subject "asic3 suspend / resume". */ ++ intmask = __asic3_read_register(asic, ++ IPAQ_ASIC3_OFFSET(INTR, IntMask)); ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), ++ intmask & ~ASIC3_INTMASK_GINTMASK); ++ mdelay(1); ++ __asic3_write_register(asic, IPAQ_ASIC3_OFFSET(INTR, IntMask), ++ intmask | ASIC3_INTMASK_GINTMASK); ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver asic3_device_driver = { ++ .driver = { ++ .name = "asic3", ++ }, ++ .probe = asic3_probe, ++ .remove = asic3_remove, ++ .suspend = asic3_suspend, ++ .resume = asic3_resume, ++ .shutdown = asic3_shutdown, ++}; ++ ++static int __init asic3_base_init(void) ++{ ++ int retval = 0; ++ retval = platform_driver_register(&asic3_device_driver); ++ return retval; ++} ++ ++static void __exit asic3_base_exit(void) ++{ ++ platform_driver_unregister(&asic3_device_driver); ++} ++ ++#ifdef MODULE ++module_init(asic3_base_init); ++#else /* start early for dependencies */ ++subsys_initcall(asic3_base_init); ++#endif ++module_exit(asic3_base_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Phil Blundell "); ++MODULE_DESCRIPTION("Core driver for HTC ASIC3"); ++MODULE_SUPPORTED_DEVICE("asic3"); +Index: linux-2.6.23/drivers/mfd/soc-core.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/mfd/soc-core.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,106 @@ ++/* ++ * drivers/soc/soc-core.c ++ * ++ * core SoC support ++ * Copyright (c) 2006 Ian Molton ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This file contains functionality used by many SoC type devices. ++ * ++ * Created: 2006-11-28 ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include "soc-core.h" ++ ++void soc_free_devices(struct platform_device *devices, int nr_devs) ++{ ++ struct platform_device *dev = devices; ++ int i; ++ ++ for (i = 0; i < nr_devs; i++) { ++ struct resource *res = dev->resource; ++ platform_device_unregister(dev++); ++ kfree(res); ++ } ++ kfree(devices); ++} ++EXPORT_SYMBOL_GPL(soc_free_devices); ++ ++#define SIGNED_SHIFT(val, shift) ((shift) >= 0 ? ((val) << (shift)) : ((val) >> -(shift))) ++ ++struct platform_device *soc_add_devices(struct platform_device *dev, ++ struct soc_device_data *soc, int nr_devs, ++ struct resource *mem, ++ int relative_addr_shift, int irq_base) ++{ ++ struct platform_device *devices; ++ int i, r, base; ++ ++ devices = kzalloc(nr_devs * sizeof(struct platform_device), GFP_KERNEL); ++ if (!devices) ++ return NULL; ++ ++ for (i = 0; i < nr_devs; i++) { ++ struct platform_device *sdev = &devices[i]; ++ struct soc_device_data *blk = &soc[i]; ++ struct resource *res; ++ ++ sdev->id = -1; ++ sdev->name = blk->name; ++ ++ sdev->dev.parent = &dev->dev; ++ sdev->dev.platform_data = (void *)blk->hwconfig; ++ sdev->num_resources = blk->num_resources; ++ ++ /* Allocate space for the subdevice resources */ ++ res = kzalloc (blk->num_resources * sizeof (struct resource), GFP_KERNEL); ++ if (!res) ++ goto fail; ++ ++ for (r = 0 ; r < blk->num_resources ; r++) { ++ res[r].name = blk->res[r].name; // Fixme - should copy ++ ++ /* Find out base to use */ ++ base = 0; ++ if (blk->res[r].flags & IORESOURCE_MEM) { ++ base = mem->start; ++ } else if ((blk->res[r].flags & IORESOURCE_IRQ) && ++ (blk->res[r].flags & IORESOURCE_IRQ_SOC_SUBDEVICE)) { ++ base = irq_base; ++ } ++ ++ /* Adjust resource */ ++ if (blk->res[r].flags & IORESOURCE_MEM) { ++ res[r].parent = mem; ++ res[r].start = base + SIGNED_SHIFT(blk->res[r].start, relative_addr_shift); ++ res[r].end = base + SIGNED_SHIFT(blk->res[r].end, relative_addr_shift); ++ } else { ++ res[r].start = base + blk->res[r].start; ++ res[r].end = base + blk->res[r].end; ++ } ++ res[r].flags = blk->res[r].flags; ++ } ++ ++ sdev->resource = res; ++ if (platform_device_register(sdev)) { ++ kfree(res); ++ goto fail; ++ } ++ ++ printk(KERN_INFO "SoC: registering %s\n", blk->name); ++ } ++ return devices; ++ ++fail: ++ soc_free_devices(devices, i + 1); ++ return NULL; ++} ++EXPORT_SYMBOL_GPL(soc_add_devices); +Index: linux-2.6.23/drivers/mfd/soc-core.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/mfd/soc-core.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,30 @@ ++/* ++ * drivers/soc/soc-core.h ++ * ++ * core SoC support ++ * Copyright (c) 2006 Ian Molton ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This file contains prototypes for the functions in soc-core.c ++ * ++ * Created: 2006-11-28 ++ * ++ */ ++ ++struct soc_device_data { ++ char *name; ++ struct resource *res; ++ int num_resources; ++ void *hwconfig; /* platform_data to pass to the subdevice */ ++}; ++ ++struct platform_device *soc_add_devices(struct platform_device *dev, ++ struct soc_device_data *soc, int n_devs, ++ struct resource *mem, ++ int relative_addr_shift, int irq_base); ++ ++void soc_free_devices(struct platform_device *devices, int nr_devs); ++ +Index: linux-2.6.23/include/asm-arm/arch-pxa/clock.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/clock.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,27 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/clock.h ++ * ++ * Copyright (C) 2006 Erik Hovland ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++struct clk { ++ struct list_head node; ++ struct module *owner; ++ struct clk *parent; ++ const char *name; ++ int id; ++ unsigned int enabled; ++ unsigned long rate; ++ unsigned long ctrlbit; ++ ++ void (*enable)(struct clk *); ++ void (*disable)(struct clk *); ++}; ++ ++ ++extern int clk_register(struct clk *clk); ++extern void clk_unregister(struct clk *clk); +Index: linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-asic.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-asic.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,213 @@ ++/* ++ * include/asm/arm/arch-pxa/htcuniversal-asic.h ++ * ++ * Authors: Giuseppe Zompatori ++ * ++ * based on previews work, see below: ++ * ++ * include/asm/arm/arch-pxa/hx4700-asic.h ++ * Copyright (c) 2004 SDG Systems, LLC ++ * ++ */ ++ ++#ifndef _HTCUNIVERSAL_ASIC_H_ ++#define _HTCUNIVERSAL_ASIC_H_ ++ ++#include ++ ++/* ASIC3 */ ++ ++#define HTCUNIVERSAL_ASIC3_GPIO_PHYS PXA_CS4_PHYS ++#define HTCUNIVERSAL_ASIC3_MMC_PHYS PXA_CS3_PHYS ++ ++/* TODO: some information is missing here */ ++ ++/* ASIC3 GPIO A bank */ ++ ++#define GPIOA_I2C_EN 0 /* Output */ ++#define GPIOA_SPK_PWR1_ON 1 /* Output */ ++#define GPIOA_AUDIO_PWR_ON 2 /* Output */ ++#define GPIOA_EARPHONE_PWR_ON 3 /* Output */ ++ ++#define GPIOA_UNKNOWN4 4 /* Output */ ++#define GPIOA_BUTTON_BACKLIGHT_N 5 /* Input */ ++#define GPIOA_SPK_PWR2_ON 6 /* Output */ ++#define GPIOA_BUTTON_RECORD_N 7 /* Input */ ++ ++#define GPIOA_BUTTON_CAMERA_N 8 /* Input */ ++#define GPIOA_UNKNOWN9 9 /* Output */ ++#define GPIOA_FLASHLIGHT 10 /* Output */ ++#define GPIOA_COVER_ROTATE_N 11 /* Input */ ++ ++#define GPIOA_TOUCHSCREEN_N 12 /* Input */ ++#define GPIOA_VOL_UP_N 13 /* Input */ ++#define GPIOA_VOL_DOWN_N 14 /* Input */ ++#define GPIOA_LCD_PWR5_ON 15 /* Output */ ++ ++/* ASIC3 GPIO B bank */ ++ ++#define GPIOB_BB_READY 0 /* Input */ ++#define GPIOB_CODEC_PDN 1 /* Output */ ++#define GPIOB_UNKNOWN2 2 /* Input */ ++#define GPIOB_BB_UNKNOWN3 3 /* Input */ ++ ++#define GPIOB_BT_IRQ 4 /* Input */ ++#define GPIOB_CLAMSHELL_N 5 /* Input */ ++#define GPIOB_LCD_PWR3_ON 6 /* Output */ ++#define GPIOB_BB_ALERT 7 /* Input */ ++ ++#define GPIOB_BB_RESET2 8 /* Output */ ++#define GPIOB_EARPHONE_N 9 /* Input */ ++#define GPIOB_MICRECORD_N 10 /* Input */ ++#define GPIOB_NIGHT_SENSOR 11 /* Input */ ++ ++#define GPIOB_UMTS_DCD 12 /* Input */ ++#define GPIOB_UNKNOWN13 13 /* Input */ ++#define GPIOB_CHARGE_EN 14 /* Output */ ++#define GPIOB_USB_PUEN 15 /* Output */ ++ ++/* ASIC3 GPIO C bank */ ++ ++#define GPIOC_LED_BTWIFI 0 /* Output */ ++#define GPIOC_LED_RED 1 /* Output */ ++#define GPIOC_LED_GREEN 2 /* Output */ ++#define GPIOC_BOARDID3 3 /* Input */ ++ ++#define GPIOC_WIFI_IRQ_N 4 /* Input */ ++#define GPIOC_WIFI_RESET 5 /* Output */ ++#define GPIOC_WIFI_PWR1_ON 6 /* Output */ ++#define GPIOC_BT_RESET 7 /* Output */ ++ ++#define GPIOC_UNKNOWN8 8 /* Output */ ++#define GPIOC_LCD_PWR1_ON 9 /* Output */ ++#define GPIOC_LCD_PWR2_ON 10 /* Output */ ++#define GPIOC_BOARDID2 11 /* Input */ ++ ++#define GPIOC_BOARDID1 12 /* Input */ ++#define GPIOC_BOARDID0 13 /* Input */ ++#define GPIOC_BT_PWR_ON 14 /* Output */ ++#define GPIOC_CHARGE_ON 15 /* Output */ ++ ++/* ASIC3 GPIO D bank */ ++ ++#define GPIOD_KEY_OK_N 0 /* Input */ ++#define GPIOD_KEY_RIGHT_N 1 /* Input */ ++#define GPIOD_KEY_LEFT_N 2 /* Input */ ++#define GPIOD_KEY_DOWN_N 3 /* Input */ ++ ++#define GPIOD_KEY_UP_N 4 /* Input */ ++#define GPIOD_SDIO_DET 5 /* Input */ ++#define GPIOD_WIFI_PWR2_ON 6 /* Output */ ++#define GPIOD_HW_REBOOT 7 /* Output */ ++ ++#define GPIOD_BB_RESET1 8 /* Output */ ++#define GPIOD_UNKNOWN9 9 /* Output */ ++#define GPIOD_VIBRA_PWR_ON 10 /* Output */ ++#define GPIOD_WIFI_PWR3_ON 11 /* Output */ ++ ++#define GPIOD_FL_PWR_ON 12 /* Output */ ++#define GPIOD_LCD_PWR4_ON 13 /* Output */ ++#define GPIOD_BL_KEYP_PWR_ON 14 /* Output */ ++#define GPIOD_BL_KEYB_PWR_ON 15 /* Output */ ++ ++extern struct platform_device htcuniversal_asic3; ++ ++/* ASIC3 GPIO A bank */ ++ ++#define GPIO_I2C_EN 0*16+GPIOA_I2C_EN ++#define GPIO_SPK_PWR1_ON 0*16+GPIOA_SPK_PWR1_ON ++#define GPIO_AUDIO_PWR_ON 0*16+GPIOA_AUDIO_PWR_ON ++#define GPIO_EARPHONE_PWR_ON 0*16+GPIOA_EARPHONE_PWR_ON ++ ++#define GPIO_UNKNOWNA4 0*16+GPIOA_UNKNOWN4 ++#define GPIO_BUTTON_BACKLIGHT_N 0*16+GPIOA_BUTTON_BACKLIGHT_N ++#define GPIO_SPK_PWR2_ON 0*16+GPIOA_SPK_PWR2_ON ++#define GPIO_BUTTON_RECORD_N 0*16+GPIOA_BUTTON_RECORD_N ++ ++#define GPIO_BUTTON_CAMERA_N 0*16+GPIOA_BUTTON_CAMERA_N ++#define GPIO_UNKNOWNA9 0*16+GPIOA_UNKNOWN9 ++#define GPIO_FLASHLIGHT 0*16+GPIOA_FLASHLIGHT ++#define GPIO_COVER_ROTATE_N 0*16+GPIOA_COVER_ROTATE_N ++ ++#define GPIO_TOUCHSCREEN_N 0*16+GPIOA_TOUCHSCREEN_N ++#define GPIO_VOL_UP_N 0*16+GPIOA_VOL_UP_N ++#define GPIO_VOL_DOWN_N 0*16+GPIOA_VOL_DOWN_N ++#define GPIO_LCD_PWR5_ON 0*16+GPIOA_LCD_PWR5_ON ++ ++/* ASIC3 GPIO B bank */ ++ ++#define GPIO_BB_READY 1*16+GPIOB_BB_READY ++#define GPIO_CODEC_PDN 1*16+GPIOB_CODEC_PDN ++#define GPIO_UNKNOWNB2 1*16+GPIOB_UNKNOWN2 ++#define GPIO_BB_UNKNOWN3 1*16+GPIOB_BB_UNKNOWN3 ++ ++#define GPIO_BT_IRQ 1*16+GPIOB_BT_IRQ ++#define GPIO_CLAMSHELL_N 1*16+GPIOB_CLAMSHELL_N ++#define GPIO_LCD_PWR3_ON 1*16+GPIOB_LCD_PWR3_ON ++#define GPIO_BB_ALERT 1*16+GPIOB_BB_ALERT ++ ++#define GPIO_BB_RESET2 1*16+GPIOB_BB_RESET2 ++#define GPIO_EARPHONE_N 1*16+GPIOB_EARPHONE_N ++#define GPIO_MICRECORD_N 1*16+GPIOB_MICRECORD_N ++#define GPIO_NIGHT_SENSOR 1*16+GPIOB_NIGHT_SENSOR ++ ++#define GPIO_UMTS_DCD 1*16+GPIOB_UMTS_DCD ++#define GPIO_UNKNOWNB13 1*16+GPIOB_UNKNOWN13 ++#define GPIO_CHARGE_EN 1*16+GPIOB_CHARGE_EN ++#define GPIO_USB_PUEN 1*16+GPIOB_USB_PUEN ++ ++/* ASIC3 GPIO C bank */ ++ ++#define GPIO_LED_BTWIFI 2*16+GPIOC_LED_BTWIFI ++#define GPIO_LED_RED 2*16+GPIOC_LED_RED ++#define GPIO_LED_GREEN 2*16+GPIOC_LED_GREEN ++#define GPIO_BOARDID3 2*16+GPIOC_BOARDID3 ++ ++#define GPIO_WIFI_IRQ_N 2*16+GPIOC_WIFI_IRQ_N ++#define GPIO_WIFI_RESET 2*16+GPIOC_WIFI_RESET ++#define GPIO_WIFI_PWR1_ON 2*16+GPIOC_WIFI_PWR1_ON ++#define GPIO_BT_RESET 2*16+GPIOC_BT_RESET ++ ++#define GPIO_UNKNOWNC8 2*16+GPIOC_UNKNOWN8 ++#define GPIO_LCD_PWR1_ON 2*16+GPIOC_LCD_PWR1_ON ++#define GPIO_LCD_PWR2_ON 2*16+GPIOC_LCD_PWR2_ON ++#define GPIO_BOARDID2 2*16+GPIOC_BOARDID2 ++ ++#define GPIO_BOARDID1 2*16+GPIOC_BOARDID1 ++#define GPIO_BOARDID0 2*16+GPIOC_BOARDID0 ++#define GPIO_BT_PWR_ON 2*16+GPIOC_BT_PWR_ON ++#define GPIO_CHARGE_ON 2*16+GPIOC_CHARGE_ON ++ ++/* ASIC3 GPIO D bank */ ++ ++#define GPIO_KEY_OK_N 3*16+GPIOD_KEY_OK_N ++#define GPIO_KEY_RIGHT_N 3*16+GPIOD_KEY_RIGHT_N ++#define GPIO_KEY_LEFT_N 3*16+GPIOD_KEY_LEFT_N ++#define GPIO_KEY_DOWN_N 3*16+GPIOD_KEY_DOWN_N ++ ++#define GPIO_KEY_UP_N 3*16+GPIOD_KEY_UP_N ++#define GPIO_SDIO_DET 3*16+GPIOD_SDIO_DET ++#define GPIO_WIFI_PWR2_ON 3*16+GPIOD_WIFI_PWR2_ON ++#define GPIO_HW_REBOOT 3*16+GPIOD_HW_REBOOT ++ ++#define GPIO_BB_RESET1 3*16+GPIOD_BB_RESET1 ++#define GPIO_UNKNOWND9 3*16+GPIOD_UNKNOWN9 ++#define GPIO_VIBRA_PWR_ON 3*16+GPIOD_VIBRA_PWR_ON ++#define GPIO_WIFI_PWR3_ON 3*16+GPIOD_WIFI_PWR3_ON ++ ++#define GPIO_FL_PWR_ON 3*16+GPIOD_FL_PWR_ON ++#define GPIO_LCD_PWR4_ON 3*16+GPIOD_LCD_PWR4_ON ++#define GPIO_BL_KEYP_PWR_ON 3*16+GPIOD_BL_KEYP_PWR_ON ++#define GPIO_BL_KEYB_PWR_ON 3*16+GPIOD_BL_KEYB_PWR_ON ++ ++#define HTCUNIVERSAL_EGPIO_BASE PXA_CS2_PHYS+0x02000000 ++ ++#define EGPIO4_ON 4 /* something */ ++#define EGPIO5_BT_3V3_ON 5 /* Bluetooth related */ ++#define EGPIO6_WIFI_ON 6 /* WLAN related*/ ++ ++extern void htcuniversal_egpio_enable( u_int16_t bits ); ++extern void htcuniversal_egpio_disable( u_int16_t bits ); ++ ++#endif /* _HTCUNIVERSAL_ASIC_H_ */ ++ +Index: linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-gpio.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-gpio.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,220 @@ ++/* ++ * include/asm-arm/arch-pxa/htcuniversal-gpio.h ++ * History: ++ * ++ * 2004-12-10 Michael Opdenacker. Wrote down GPIO settings as identified by Jamey Hicks. ++ * Reused the h2200-gpio.h file as a template. ++ */ ++ ++#ifndef _HTCUNIVERSAL_GPIO_H_ ++#define _HTCUNIVERSAL_GPIO_H_ ++ ++#include ++ ++#define GET_HTCUNIVERSAL_GPIO(gpio) \ ++ (GPLR(GPIO_NR_HTCUNIVERSAL_ ## gpio) & GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio)) ++ ++#define SET_HTCUNIVERSAL_GPIO(gpio, setp) \ ++do { \ ++if (setp) \ ++ GPSR(GPIO_NR_HTCUNIVERSAL_ ## gpio) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio); \ ++else \ ++ GPCR(GPIO_NR_HTCUNIVERSAL_ ## gpio) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio); \ ++} while (0) ++ ++#define SET_HTCUNIVERSAL_GPIO_N(gpio, setp) \ ++do { \ ++if (setp) \ ++ GPCR(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N); \ ++else \ ++ GPSR(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N) = GPIO_bit(GPIO_NR_HTCUNIVERSAL_ ## gpio ## _N); \ ++} while (0) ++ ++#define HTCUNIVERSAL_IRQ(gpio) \ ++ IRQ_GPIO(GPIO_NR_HTCUNIVERSAL_ ## gpio) ++ ++#define GPIO_NR_HTCUNIVERSAL_KEY_ON_N 0 ++#define GPIO_NR_HTCUNIVERSAL_GP_RST_N 1 ++ ++#define GPIO_NR_HTCUNIVERSAL_USB_DET 9 ++#define GPIO_NR_HTCUNIVERSAL_POWER_DET 10 ++ ++#define GPIO_NR_HTCUNIVERSAL_CIF_DD7 12 ++#define GPIO_NR_HTCUNIVERSAL_ASIC3_SDIO_INT_N 13 ++#define GPIO_NR_HTCUNIVERSAL_ASIC3_EXT_INT 14 ++#define GPIO_NR_HTCUNIVERSAL_CS1_N 15 ++ ++#define GPIO_NR_HTCUNIVERSAL_CIF_DD6 17 ++#define GPIO_NR_HTCUNIVERSAL_RDY 18 ++ ++#define GPIO_NR_HTCUNIVERSAL_PHONE_START 19 ++ ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT7 22 ++#define GPIO_NR_HTCUNIVERSAL_SPI_CLK 23 ++#define GPIO_NR_HTCUNIVERSAL_SPI_FRM 24 ++#define GPIO_NR_HTCUNIVERSAL_SPI_DO 25 ++#define GPIO_NR_HTCUNIVERSAL_SPI_DI 26 ++ ++#define GPIO_NR_HTCUNIVERSAL_CODEC_ON 27 ++#define GPIO_NR_HTCUNIVERSAL_I2S_BCK 28 ++#define GPIO_NR_HTCUNIVERSAL_I2S_DIN 29 ++#define GPIO_NR_HTCUNIVERSAL_I2S_DOUT 30 ++#define GPIO_NR_HTCUNIVERSAL_I2S_SYNC 31 ++ ++#define GPIO_NR_HTCUNIVERSAL_RS232_ON 32 ++#define GPIO_NR_HTCUNIVERSAL_CS5_N 33 ++ ++#define GPIO_NR_HTCUNIVERSAL_PHONE_RXD 34 ++#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS 35 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN7 36 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN3 37 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN4 38 ++#define GPIO_NR_HTCUNIVERSAL_PHONE_TXD 39 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT6 40 ++#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS 41 ++#define GPIO_NR_HTCUNIVERSAL_BT_RXD 42 ++#define GPIO_NR_HTCUNIVERSAL_BT_TXD 43 ++#define GPIO_NR_HTCUNIVERSAL_BT_UART_CTS 44 ++#define GPIO_NR_HTCUNIVERSAL_BT_UART_RTS 45 ++ ++#define GPIO_NR_HTCUNIVERSAL_SIR_RXD 42 ++#define GPIO_NR_HTCUNIVERSAL_SIR_TXD 43 ++ ++#define GPIO_NR_HTCUNIVERSAL_POE_N 48 ++#define GPIO_NR_HTCUNIVERSAL_PWE_N 49 ++#define GPIO_NR_HTCUNIVERSAL_CIF_DD3 50 ++#define GPIO_NR_HTCUNIVERSAL_CIF_DD2 51 ++#define GPIO_NR_HTCUNIVERSAL_CIF_DD4 52 ++ ++#define GPIO_NR_HTCUNIVERSAL_CIF_MCLK 53 ++#define GPIO_NR_HTCUNIVERSAL_CIF_PCLK 54 ++#define GPIO_NR_HTCUNIVERSAL_CIF_DD1 55 ++ ++#define GPIO_NR_HTCUNIVERSAL_LDD0 58 ++#define GPIO_NR_HTCUNIVERSAL_LDD1 59 ++#define GPIO_NR_HTCUNIVERSAL_LDD2 60 ++#define GPIO_NR_HTCUNIVERSAL_LDD3 61 ++#define GPIO_NR_HTCUNIVERSAL_LDD4 62 ++#define GPIO_NR_HTCUNIVERSAL_LDD5 63 ++#define GPIO_NR_HTCUNIVERSAL_LDD6 64 ++#define GPIO_NR_HTCUNIVERSAL_LDD7 65 ++#define GPIO_NR_HTCUNIVERSAL_LDD8 66 ++#define GPIO_NR_HTCUNIVERSAL_LDD9 67 ++#define GPIO_NR_HTCUNIVERSAL_LDD10 68 ++#define GPIO_NR_HTCUNIVERSAL_LDD11 69 ++#define GPIO_NR_HTCUNIVERSAL_LDD12 70 ++#define GPIO_NR_HTCUNIVERSAL_LDD13 71 ++#define GPIO_NR_HTCUNIVERSAL_LDD14 72 ++#define GPIO_NR_HTCUNIVERSAL_LDD15 73 ++ ++#define GPIO_NR_HTCUNIVERSAL_LFCLK_RD 74 ++#define GPIO_NR_HTCUNIVERSAL_LFCLK_A0 75 ++#define GPIO_NR_HTCUNIVERSAL_LFCLK_WR 76 ++#define GPIO_NR_HTCUNIVERSAL_LBIAS 77 ++ ++#define GPIO_NR_HTCUNIVERSAL_CS2_N 78 ++#define GPIO_NR_HTCUNIVERSAL_CS3_N 79 ++#define GPIO_NR_HTCUNIVERSAL_CS4_N 80 ++#define GPIO_NR_HTCUNIVERSAL_CIF_DD0 81 ++#define GPIO_NR_HTCUNIVERSAL_CIF_DD5 82 ++ ++#define GPIO_NR_HTCUNIVERSAL_CIF_LV 84 ++#define GPIO_NR_HTCUNIVERSAL_CIF_FV 85 ++ ++#define GPIO_NR_HTCUNIVERSAL_LCD1 86 ++#define GPIO_NR_HTCUNIVERSAL_LCD2 87 ++ ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN5 90 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN6 91 ++ ++#define GPIO_NR_HTCUNIVERSAL_DREQ1 97 ++ ++#define GPIO_NR_HTCUNIVERSAL_PHONE_RESET 98 ++ ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN0 100 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN1 101 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN2 102 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT0 103 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT1 104 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT2 105 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT3 106 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT4 107 ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT5 108 ++ ++#define GPIO_NR_HTCUNIVERSAL_PHONE_UNKNOWN 109 ++#define GPIO_NR_HTCUNIVERSAL_PHONE_OFF 110 ++ ++#define GPIO_NR_HTCUNIVERSAL_USB_PUEN 112 ++#define GPIO_NR_HTCUNIVERSAL_I2S_SYSCLK 113 ++ ++#define GPIO_NR_HTCUNIVERSAL_PWM_OUT1 115 ++ ++#define GPIO_NR_HTCUNIVERSAL_I2C_SCL 117 ++#define GPIO_NR_HTCUNIVERSAL_I2C_SDA 118 ++ ++#if 0 ++#define GPIO_NR_HTCUNIVERSAL_CPU_BATT_FAULT_N ++#define GPIO_NR_HTCUNIVERSAL_ASIC3_RESET_N ++#define GPIO_NR_HTCUNIVERSAL_CHARGE_EN_N ++#define GPIO_NR_HTCUNIVERSAL_FLASH_VPEN ++#define GPIO_NR_HTCUNIVERSAL_BATT_OFF ++#define GPIO_NR_HTCUNIVERSAL_USB_CHARGE_RATE ++#define GPIO_NR_HTCUNIVERSAL_BL_DETECT_N ++#define GPIO_NR_HTCUNIVERSAL_CPU_HW_RESET_N ++#endif ++ ++ ++#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_CLK_MD (23 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_FRM_MD (24 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DO_MD (25 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_TOUCHSCREEN_SPI_DI_MD (26 | GPIO_ALT_FN_1_IN) ++ ++#define GPIO_NR_HTCUNIVERSAL_I2S_BCK_MD (28 | GPIO_ALT_FN_1_OUT) ++#define GPIO_NR_HTCUNIVERSAL_I2S_DIN_MD (29 | GPIO_ALT_FN_2_IN) ++#define GPIO_NR_HTCUNIVERSAL_I2S_DOUT_MD (30 | GPIO_ALT_FN_1_OUT) ++#define GPIO_NR_HTCUNIVERSAL_I2S_SYNC_MD (31 | GPIO_ALT_FN_1_OUT) ++ ++#define GPIO_NR_HTCUNIVERSAL_PHONE_RXD_MD (34 | GPIO_ALT_FN_1_IN) ++#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_CTS_MD (35 | GPIO_ALT_FN_1_IN) ++ ++#define GPIO_NR_HTCUNIVERSAL_PHONE_TXD_MD (39 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_PHONE_UART_RTS_MD (41 | GPIO_ALT_FN_2_OUT) ++ ++#define GPIO_NR_HTCUNIVERSAL_BT_RXD_MD (42 | GPIO_ALT_FN_1_IN) ++#define GPIO_NR_HTCUNIVERSAL_BT_TXD_MD (43 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_BT_UART_CTS_MD (44 | GPIO_ALT_FN_1_IN) ++#define GPIO_NR_HTCUNIVERSAL_BT_UART_RTS_MD (45 | GPIO_ALT_FN_2_OUT) ++ ++#define GPIO_NR_HTCUNIVERSAL_SIR_RXD_MD (46 | GPIO_ALT_FN_2_IN) ++#define GPIO_NR_HTCUNIVERSAL_SIR_TXD_MD (47 | GPIO_ALT_FN_1_OUT) ++ ++#define GPIO_NR_HTCUNIVERSAL_POE_N_MD (48 | GPIO_ALT_FN_2_OUT | GPIO_DFLT_HIGH) ++#define GPIO_NR_HTCUNIVERSAL_PWE_N_MD (49 | GPIO_ALT_FN_2_OUT | GPIO_DFLT_HIGH) ++ ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN0_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN0 | GPIO_ALT_FN_1_IN) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN1_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN1 | GPIO_ALT_FN_1_IN) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN2_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN2 | GPIO_ALT_FN_1_IN) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN3_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN3 | GPIO_ALT_FN_3_IN) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN4_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN4 | GPIO_ALT_FN_2_IN) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN5_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN5 | GPIO_ALT_FN_1_IN) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN6_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN6 | GPIO_ALT_FN_1_IN) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKIN7_MD (GPIO_NR_HTCUNIVERSAL_KP_MKIN7 | GPIO_ALT_FN_3_IN) ++ ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT0_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT0 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT1_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT1 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT2_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT2 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT3_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT3 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT4_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT4 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT5_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT5 | GPIO_ALT_FN_2_OUT) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT6_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT6 | GPIO_ALT_FN_1_OUT) ++#define GPIO_NR_HTCUNIVERSAL_KP_MKOUT7_MD (GPIO_NR_HTCUNIVERSAL_KP_MKOUT7 | GPIO_ALT_FN_1_OUT) ++ ++ ++#define GPIO_NR_HTCUNIVERSAL_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) ++ ++#define GPIO_NR_HTCUNIVERSAL_PWM1OUT_MD (115 | GPIO_ALT_FN_3_OUT) ++ ++#define GPIO_NR_HTCUNIVERSAL_I2C_SCL_MD (117 | GPIO_ALT_FN_1_OUT) ++#define GPIO_NR_HTCUNIVERSAL_I2C_SDA_MD (118 | GPIO_ALT_FN_1_OUT) ++ ++#endif /* _HTCUNIVERSAL_GPIO_H */ +Index: linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-init.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal-init.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,14 @@ ++/* ++ * include/asm/arm/arch-pxa/htcuniversal-init.h ++ * Copyright (c) 2004 SDG Systems, LLC ++ */ ++ ++#ifndef _HTCUNIVERSAL_INIT_H_ ++#define _HTCUNIVERSAL_INIT_H_ ++ ++/* htcuniversal initialization data should be found here ++ * See -init.h files from other devices for details ++ */ ++ ++#endif /* _HTCUNIVERSAL_INIT_H_ */ ++ +Index: linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/htcuniversal.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,3 @@ ++#include ++ ++#define HTCUNIVERSAL_ASIC3_IRQ_BASE IRQ_BOARD_START +Index: linux-2.6.23/include/asm-arm/arch-pxa/pxa-pm_ll.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/pxa-pm_ll.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,6 @@ ++struct pxa_ll_pm_ops { ++ void (*suspend)(unsigned long); ++ void (*resume)(void); ++}; ++ ++extern struct pxa_ll_pm_ops *pxa_pm_set_ll_ops(struct pxa_ll_pm_ops *new_ops); +Index: linux-2.6.23/include/asm-arm/hardware/asic3_keys.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/hardware/asic3_keys.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,18 @@ ++#include ++ ++struct asic3_keys_button { ++ /* Configuration parameters */ ++ int keycode; ++ int gpio; ++ int active_low; ++ char *desc; ++ int type; ++ /* Internal state vars - add below */ ++}; ++ ++struct asic3_keys_platform_data { ++ struct asic3_keys_button *buttons; ++ int nbuttons; ++ struct input_dev *input; ++ struct device *asic3_dev; ++}; +Index: linux-2.6.23/include/asm-arm/hardware/asic3_leds.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/hardware/asic3_leds.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,34 @@ ++/* ++ * LEDs support for HTC ASIC3 devices. ++ * ++ * Copyright (c) 2006 Anton Vorontsov ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++ ++struct asic3_leds_machinfo; ++ ++struct asic3_led { ++ struct led_classdev led_cdev; ++ int hw_num; /* Number of "hardware-accelerated" led */ ++ int gpio_num; /* Number of GPIO if hw_num == -1 */ ++ struct asic3_leds_machinfo *machinfo; ++}; ++ ++struct asic3_leds_machinfo { ++ int num_leds; ++ struct asic3_led *leds; ++ struct platform_device *asic3_pdev; ++}; ++ ++extern int asic3_leds_register(void); ++extern void asic3_leds_unregister(void); ++ +Index: linux-2.6.23/include/asm-arm/hardware/ipaq-asic3.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/hardware/ipaq-asic3.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,602 @@ ++/* ++ * ++ * Definitions for the HTC ASIC3 chip found in several handheld devices ++ * ++ * Copyright 2001 Compaq Computer Corporation. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, ++ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS ++ * FITNESS FOR ANY PARTICULAR PURPOSE. ++ * ++ * Author: Andrew Christian ++ * ++ */ ++ ++#ifndef IPAQ_ASIC3_H ++#define IPAQ_ASIC3_H ++ ++/****************************************************/ ++/* IPAQ, ASIC #3, replaces ASIC #1 */ ++ ++#define IPAQ_ASIC3_OFFSET(x,y) (_IPAQ_ASIC3_ ## x ## _Base + _IPAQ_ASIC3_ ## x ## _ ## y) ++#define IPAQ_ASIC3_GPIO_OFFSET(x,y) (_IPAQ_ASIC3_GPIO_ ## x ## _Base + _IPAQ_ASIC3_GPIO_ ## y) ++ ++ ++/* All offsets below are specified with the following address bus shift */ ++#define ASIC3_DEFAULT_ADDR_SHIFT 2 ++ ++#define _IPAQ_ASIC3_GPIO_A_Base 0x0000 ++#define _IPAQ_ASIC3_GPIO_B_Base 0x0100 ++#define _IPAQ_ASIC3_GPIO_C_Base 0x0200 ++#define _IPAQ_ASIC3_GPIO_D_Base 0x0300 ++ ++#define _IPAQ_ASIC3_GPIO_Mask 0x00 /* R/W 0:don't mask, 1:mask interrupt */ ++#define _IPAQ_ASIC3_GPIO_Direction 0x04 /* R/W 0:input, 1:output */ ++#define _IPAQ_ASIC3_GPIO_Out 0x08 /* R/W 0:output low, 1:output high */ ++#define _IPAQ_ASIC3_GPIO_TriggerType 0x0c /* R/W 0:level, 1:edge */ ++#define _IPAQ_ASIC3_GPIO_EdgeTrigger 0x10 /* R/W 0:falling, 1:rising */ ++#define _IPAQ_ASIC3_GPIO_LevelTrigger 0x14 /* R/W 0:low, 1:high level detect */ ++#define _IPAQ_ASIC3_GPIO_SleepMask 0x18 /* R/W 0:don't mask, 1:mask trigger in sleep mode */ ++#define _IPAQ_ASIC3_GPIO_SleepOut 0x1c /* R/W level 0:low, 1:high in sleep mode */ ++#define _IPAQ_ASIC3_GPIO_BattFaultOut 0x20 /* R/W level 0:low, 1:high in batt_fault */ ++#define _IPAQ_ASIC3_GPIO_IntStatus 0x24 /* R/W 0:none, 1:detect */ ++#define _IPAQ_ASIC3_GPIO_AltFunction 0x28 /* R/W 0:normal control 1:LED register control */ ++#define _IPAQ_ASIC3_GPIO_SleepConf 0x2c /* R/W bit 1: autosleep 0: disable gposlpout in normal mode, enable gposlpout in sleep mode */ ++#define _IPAQ_ASIC3_GPIO_Status 0x30 /* R Pin status */ ++ ++#define IPAQ_ASIC3_GPIO_A_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Mask ) ++#define IPAQ_ASIC3_GPIO_A_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Direction ) ++#define IPAQ_ASIC3_GPIO_A_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Out ) ++#define IPAQ_ASIC3_GPIO_A_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, A, TriggerType ) ++#define IPAQ_ASIC3_GPIO_A_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, A, EdgeTrigger ) ++#define IPAQ_ASIC3_GPIO_A_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, A, LevelTrigger ) ++#define IPAQ_ASIC3_GPIO_A_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, A, SleepMask ) ++#define IPAQ_ASIC3_GPIO_A_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, A, SleepOut ) ++#define IPAQ_ASIC3_GPIO_A_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, A, BattFaultOut ) ++#define IPAQ_ASIC3_GPIO_A_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, A, IntStatus ) ++#define IPAQ_ASIC3_GPIO_A_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, A, AltFunction ) ++#define IPAQ_ASIC3_GPIO_A_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, A, SleepConf ) ++#define IPAQ_ASIC3_GPIO_A_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, A, Status ) ++ ++#define IPAQ_ASIC3_GPIO_B_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Mask ) ++#define IPAQ_ASIC3_GPIO_B_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Direction ) ++#define IPAQ_ASIC3_GPIO_B_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Out ) ++#define IPAQ_ASIC3_GPIO_B_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, B, TriggerType ) ++#define IPAQ_ASIC3_GPIO_B_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, B, EdgeTrigger ) ++#define IPAQ_ASIC3_GPIO_B_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, B, LevelTrigger ) ++#define IPAQ_ASIC3_GPIO_B_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, B, SleepMask ) ++#define IPAQ_ASIC3_GPIO_B_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, B, SleepOut ) ++#define IPAQ_ASIC3_GPIO_B_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, B, BattFaultOut ) ++#define IPAQ_ASIC3_GPIO_B_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, B, IntStatus ) ++#define IPAQ_ASIC3_GPIO_B_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, B, AltFunction ) ++#define IPAQ_ASIC3_GPIO_B_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, B, SleepConf ) ++#define IPAQ_ASIC3_GPIO_B_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, B, Status ) ++ ++#define IPAQ_ASIC3_GPIO_C_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Mask ) ++#define IPAQ_ASIC3_GPIO_C_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Direction ) ++#define IPAQ_ASIC3_GPIO_C_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Out ) ++#define IPAQ_ASIC3_GPIO_C_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, C, TriggerType ) ++#define IPAQ_ASIC3_GPIO_C_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, C, EdgeTrigger ) ++#define IPAQ_ASIC3_GPIO_C_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, C, LevelTrigger ) ++#define IPAQ_ASIC3_GPIO_C_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, C, SleepMask ) ++#define IPAQ_ASIC3_GPIO_C_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, C, SleepOut ) ++#define IPAQ_ASIC3_GPIO_C_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, C, BattFaultOut ) ++#define IPAQ_ASIC3_GPIO_C_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, C, IntStatus ) ++#define IPAQ_ASIC3_GPIO_C_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, C, AltFunction ) ++#define IPAQ_ASIC3_GPIO_C_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, C, SleepConf ) ++#define IPAQ_ASIC3_GPIO_C_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, C, Status ) ++ ++#define IPAQ_ASIC3_GPIO_D_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Mask ) ++#define IPAQ_ASIC3_GPIO_D_DIR(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Direction ) ++#define IPAQ_ASIC3_GPIO_D_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Out ) ++#define IPAQ_ASIC3_GPIO_D_LEVELTRI(_b) IPAQ_ASIC3_GPIO( _b, u16, D, TriggerType ) ++#define IPAQ_ASIC3_GPIO_D_RISING(_b) IPAQ_ASIC3_GPIO( _b, u16, D, EdgeTrigger ) ++#define IPAQ_ASIC3_GPIO_D_LEVEL(_b) IPAQ_ASIC3_GPIO( _b, u16, D, LevelTrigger ) ++#define IPAQ_ASIC3_GPIO_D_SLEEP_MASK(_b) IPAQ_ASIC3_GPIO( _b, u16, D, SleepMask ) ++#define IPAQ_ASIC3_GPIO_D_SLEEP_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, D, SleepOut ) ++#define IPAQ_ASIC3_GPIO_D_BATT_FAULT_OUT(_b) IPAQ_ASIC3_GPIO( _b, u16, D, BattFaultOut ) ++#define IPAQ_ASIC3_GPIO_D_INT_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, D, IntStatus ) ++#define IPAQ_ASIC3_GPIO_D_ALT_FUNCTION(_b) IPAQ_ASIC3_GPIO( _b, u16, D, AltFunction ) ++#define IPAQ_ASIC3_GPIO_D_SLEEP_CONF(_b) IPAQ_ASIC3_GPIO( _b, u16, D, SleepConf ) ++#define IPAQ_ASIC3_GPIO_D_STATUS(_b) IPAQ_ASIC3_GPIO( _b, u16, D, Status ) ++ ++#define _IPAQ_ASIC3_SPI_Base 0x0400 ++#define _IPAQ_ASIC3_SPI_Control 0x0000 ++#define _IPAQ_ASIC3_SPI_TxData 0x0004 ++#define _IPAQ_ASIC3_SPI_RxData 0x0008 ++#define _IPAQ_ASIC3_SPI_Int 0x000c ++#define _IPAQ_ASIC3_SPI_Status 0x0010 ++ ++#define IPAQ_ASIC3_SPI_Control(_b) IPAQ_ASIC3( _b, u16, SPI, Control ) ++#define IPAQ_ASIC3_SPI_TxData(_b) IPAQ_ASIC3( _b, u16, SPI, TxData ) ++#define IPAQ_ASIC3_SPI_RxData(_b) IPAQ_ASIC3( _b, u16, SPI, RxData ) ++#define IPAQ_ASIC3_SPI_Int(_b) IPAQ_ASIC3( _b, u16, SPI, Int ) ++#define IPAQ_ASIC3_SPI_Status(_b) IPAQ_ASIC3( _b, u16, SPI, Status ) ++ ++#define SPI_CONTROL_SPR(clk) ((clk) & 0x0f) /* Clock rate */ ++ ++#define _IPAQ_ASIC3_PWM_0_Base 0x0500 ++#define _IPAQ_ASIC3_PWM_1_Base 0x0600 ++#define _IPAQ_ASIC3_PWM_TimeBase 0x0000 ++#define _IPAQ_ASIC3_PWM_PeriodTime 0x0004 ++#define _IPAQ_ASIC3_PWM_DutyTime 0x0008 ++ ++#define IPAQ_ASIC3_PWM_TimeBase(_b, x) IPAQ_ASIC3_N( _b, u16, PWM, x, TimeBase ) ++#define IPAQ_ASIC3_PWM_PeriodTime(_b, x) IPAQ_ASIC3_N( _b, u16, PWM, x, PeriodTime ) ++#define IPAQ_ASIC3_PWM_DutyTime(_b, x) IPAQ_ASIC3_N( _b, u16, PWM, x, DutyTime ) ++ ++#define PWM_TIMEBASE_VALUE(x) ((x)&0xf) /* Low 4 bits sets time base */ ++#define PWM_TIMEBASE_ENABLE (1 << 4) /* Enable clock */ ++ ++#define _IPAQ_ASIC3_LED_0_Base 0x0700 ++#define _IPAQ_ASIC3_LED_1_Base 0x0800 ++#define _IPAQ_ASIC3_LED_2_Base 0x0900 ++#define _IPAQ_ASIC3_LED_TimeBase 0x0000 /* R/W 7 bits */ ++#define _IPAQ_ASIC3_LED_PeriodTime 0x0004 /* R/W 12 bits */ ++#define _IPAQ_ASIC3_LED_DutyTime 0x0008 /* R/W 12 bits */ ++#define _IPAQ_ASIC3_LED_AutoStopCount 0x000c /* R/W 16 bits */ ++ ++#define IPAQ_ASIC3_LED_TimeBase(_b, x) IPAQ_ASIC3_N( _b, u8, LED, x, TimeBase ) ++#define IPAQ_ASIC3_LED_PeriodTime(_b, x) IPAQ_ASIC3_N( _b, u16, LED, x, PeriodTime ) ++#define IPAQ_ASIC3_LED_DutyTime(_b, x) IPAQ_ASIC3_N( _b, u16, LED, x, DutyTime ) ++#define IPAQ_ASIC3_LED_AutoStopCount(_b, x) IPAQ_ASIC3_N( _b, u16, LED, x, AutoStopCount ) ++ ++/* LED TimeBase bits - match ASIC2 */ ++#define LED_TBS 0x0f /* Low 4 bits sets time base, max = 13 */ ++ /* Note: max = 5 on hx4700 */ ++ /* 0: maximum time base */ ++ /* 1: maximum time base / 2 */ ++ /* n: maximum time base / 2^n */ ++ ++#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */ ++#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop set 0:disable, 1:enable */ ++#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */ ++ ++#define _IPAQ_ASIC3_CLOCK_Base 0x0A00 ++#define _IPAQ_ASIC3_CLOCK_CDEX 0x00 ++#define _IPAQ_ASIC3_CLOCK_SEL 0x04 ++ ++#define IPAQ_ASIC3_CLOCK_CDEX(_b) IPAQ_ASIC3( _b, u16, CLOCK, CDEX ) ++#define IPAQ_ASIC3_CLOCK_SEL(_b) IPAQ_ASIC3( _b, u16, CLOCK, SEL ) ++ ++#define CLOCK_CDEX_SOURCE (1 << 0) /* 2 bits */ ++#define CLOCK_CDEX_SOURCE0 (1 << 0) ++#define CLOCK_CDEX_SOURCE1 (1 << 1) ++#define CLOCK_CDEX_SPI (1 << 2) ++#define CLOCK_CDEX_OWM (1 << 3) ++#define CLOCK_CDEX_PWM0 (1 << 4) ++#define CLOCK_CDEX_PWM1 (1 << 5) ++#define CLOCK_CDEX_LED0 (1 << 6) ++#define CLOCK_CDEX_LED1 (1 << 7) ++#define CLOCK_CDEX_LED2 (1 << 8) ++ ++#define CLOCK_CDEX_SD_HOST (1 << 9) /* R/W: SD host clock source 24.576M/12.288M */ ++#define CLOCK_CDEX_SD_BUS (1 << 10) /* R/W: SD bus clock source control 24.576M/12.288M */ ++#define CLOCK_CDEX_SMBUS (1 << 11) ++#define CLOCK_CDEX_CONTROL_CX (1 << 12) ++ ++#define CLOCK_CDEX_EX0 (1 << 13) /* R/W: 32.768 kHz crystal */ ++#define CLOCK_CDEX_EX1 (1 << 14) /* R/W: 24.576 MHz crystal */ ++ ++#define CLOCK_SEL_SD_HCLK_SEL (1 << 0) /* R/W: SDIO host clock select - 1: 24.576 Mhz, 0: 12.288 MHz */ ++#define CLOCK_SEL_SD_BCLK_SEL (1 << 1) /* R/W: SDIO bus clock select - 1: 24.576 MHz, 0: 12.288 MHz */ ++#define CLOCK_SEL_CX (1 << 2) /* R/W: INT clock source control (32.768 kHz) */ ++ ++ ++#define _IPAQ_ASIC3_INTR_Base 0x0B00 ++ ++#define _IPAQ_ASIC3_INTR_IntMask 0x00 /* Interrupt mask control */ ++#define _IPAQ_ASIC3_INTR_PIntStat 0x04 /* Peripheral interrupt status */ ++#define _IPAQ_ASIC3_INTR_IntCPS 0x08 /* Interrupt timer clock pre-scale */ ++#define _IPAQ_ASIC3_INTR_IntTBS 0x0c /* Interrupt timer set */ ++ ++#define IPAQ_ASIC3_INTR_IntMask(_b) IPAQ_ASIC3( _b, u8, INTR, IntMask ) ++#define IPAQ_ASIC3_INTR_PIntStat(_b) IPAQ_ASIC3( _b, u8, INTR, PIntStat ) ++#define IPAQ_ASIC3_INTR_IntCPS(_b) IPAQ_ASIC3( _b, u8, INTR, IntCPS ) ++#define IPAQ_ASIC3_INTR_IntTBS(_b) IPAQ_ASIC3( _b, u16, INTR, IntTBS ) ++ ++#define ASIC3_INTMASK_GINTMASK (1 << 0) /* Global interrupt mask 1:enable */ ++#define ASIC3_INTMASK_GINTEL (1 << 1) /* 1: rising edge, 0: hi level */ ++#define ASIC3_INTMASK_MASK0 (1 << 2) ++#define ASIC3_INTMASK_MASK1 (1 << 3) ++#define ASIC3_INTMASK_MASK2 (1 << 4) ++#define ASIC3_INTMASK_MASK3 (1 << 5) ++#define ASIC3_INTMASK_MASK4 (1 << 6) ++#define ASIC3_INTMASK_MASK5 (1 << 7) ++ ++#define ASIC3_INTR_PERIPHERAL_A (1 << 0) ++#define ASIC3_INTR_PERIPHERAL_B (1 << 1) ++#define ASIC3_INTR_PERIPHERAL_C (1 << 2) ++#define ASIC3_INTR_PERIPHERAL_D (1 << 3) ++#define ASIC3_INTR_LED0 (1 << 4) ++#define ASIC3_INTR_LED1 (1 << 5) ++#define ASIC3_INTR_LED2 (1 << 6) ++#define ASIC3_INTR_SPI (1 << 7) ++#define ASIC3_INTR_SMBUS (1 << 8) ++#define ASIC3_INTR_OWM (1 << 9) ++ ++#define ASIC3_INTR_CPS(x) ((x)&0x0f) /* 4 bits, max 14 */ ++#define ASIC3_INTR_CPS_SET ( 1 << 4 ) /* Time base enable */ ++ ++ ++/* Basic control of the SD ASIC */ ++#define _IPAQ_ASIC3_SDHWCTRL_Base 0x0E00 ++ ++#define _IPAQ_ASIC3_SDHWCTRL_SDConf 0x00 ++#define IPAQ_ASIC3_SDHWCTRL_SDConf(_b) IPAQ_ASIC3( _b, u8, SDHWCTRL, SDConf ) ++ ++#define ASIC3_SDHWCTRL_SUSPEND (1 << 0) /* 1=suspend all SD operations */ ++#define ASIC3_SDHWCTRL_CLKSEL (1 << 1) /* 1=SDICK, 0=HCLK */ ++#define ASIC3_SDHWCTRL_PCLR (1 << 2) /* All registers of SDIO cleared */ ++#define ASIC3_SDHWCTRL_LEVCD (1 << 3) /* Level of SD card detection: 1:high, 0:low */ ++#define ASIC3_SDHWCTRL_LEVWP (1 << 4) /* Level of SD card write protection: 1=low, 0=high */ ++#define ASIC3_SDHWCTRL_SDLED (1 << 5) /* SD card LED signal 1=enable, 0=disable */ ++#define ASIC3_SDHWCTRL_SDPWR (1 << 6) /* SD card power supply control 1=enable */ ++ ++ ++/* This is a pointer to an array of 12 u32 values - but only the lower 2 bytes matter */ ++/* Use it as "IPAQ_ASIC3_HWPROTECT_ARRAY[x]" */ ++ ++#define _IPAQ_ASIC3_HWPROTECT_Base 0x1000 ++#define IPAQ_ASIC3_HWPROTECT_ARRAY ((volatile u32*)(_IPAQ_ASIC3_Base + _IPAQ_ASIC3_HWPROTECT_Base)) ++#define HWPROTECT_ARRAY_LEN 12 ++#define HWPROTECT_ARRAY_VALUES {0x4854,0x432d,0x5344,0x494f,0x2050,0x2f4e,0x3a33,0x3048,0x3830,0x3032,0x382d,0x3030} ++ ++ ++#define _IPAQ_ASIC3_EXTCF_Base 0x1100 ++ ++#define _IPAQ_ASIC3_EXTCF_Select 0x00 ++#define _IPAQ_ASIC3_EXTCF_Reset 0x04 ++ ++#define IPAQ_ASIC3_EXTCF_Select(_b) IPAQ_ASIC3( _b, u16, EXTCF, Select ) ++#define IPAQ_ASIC3_EXTCF_Reset(_b) IPAQ_ASIC3( _b, u16, EXTCF, Reset ) ++ ++#define ASIC3_EXTCF_SMOD0 (1 << 0) /* slot number of mode 0 */ ++#define ASIC3_EXTCF_SMOD1 (1 << 1) /* slot number of mode 1 */ ++#define ASIC3_EXTCF_SMOD2 (1 << 2) /* slot number of mode 2 */ ++#define ASIC3_EXTCF_OWM_EN (1 << 4) /* enable onewire module */ ++#define ASIC3_EXTCF_OWM_SMB (1 << 5) /* OWM bus selection */ ++#define ASIC3_EXTCF_OWM_RESET (1 << 6) /* undocumented, used by OWM and CF */ ++#define ASIC3_EXTCF_CF0_SLEEP_MODE (1 << 7) /* CF0 sleep state control */ ++#define ASIC3_EXTCF_CF1_SLEEP_MODE (1 << 8) /* CF1 sleep state control */ ++#define ASIC3_EXTCF_CF0_PWAIT_EN (1 << 10) /* CF0 PWAIT_n control */ ++#define ASIC3_EXTCF_CF1_PWAIT_EN (1 << 11) /* CF1 PWAIT_n control */ ++#define ASIC3_EXTCF_CF0_BUF_EN (1 << 12) /* CF0 buffer control */ ++#define ASIC3_EXTCF_CF1_BUF_EN (1 << 13) /* CF1 buffer control */ ++#define ASIC3_EXTCF_SD_MEM_ENABLE (1 << 14) ++#define ASIC3_EXTCF_CF_SLEEP (1 << 15) /* CF sleep mode control */ ++ ++/***************************************************************************** ++ * The Onewire interface registers ++ * ++ * OWM_CMD ++ * OWM_DAT ++ * OWM_INTR ++ * OWM_INTEN ++ * OWM_CLKDIV ++ * ++ *****************************************************************************/ ++ ++#define _IPAQ_ASIC3_OWM_Base 0xC00 ++ ++#define _IPAQ_ASIC3_OWM_CMD 0x00 ++#define _IPAQ_ASIC3_OWM_DAT 0x04 ++#define _IPAQ_ASIC3_OWM_INTR 0x08 ++#define _IPAQ_ASIC3_OWM_INTEN 0x0C ++#define _IPAQ_ASIC3_OWM_CLKDIV 0x10 ++ ++#define ASIC3_OWM_CMD_ONEWR (1 << 0) ++#define ASIC3_OWM_CMD_SRA (1 << 1) ++#define ASIC3_OWM_CMD_DQO (1 << 2) ++#define ASIC3_OWM_CMD_DQI (1 << 3) ++ ++#define ASIC3_OWM_INTR_PD (1 << 0) ++#define ASIC3_OWM_INTR_PDR (1 << 1) ++#define ASIC3_OWM_INTR_TBE (1 << 2) ++#define ASIC3_OWM_INTR_TEMP (1 << 3) ++#define ASIC3_OWM_INTR_RBF (1 << 4) ++ ++#define ASIC3_OWM_INTEN_EPD (1 << 0) ++#define ASIC3_OWM_INTEN_IAS (1 << 1) ++#define ASIC3_OWM_INTEN_ETBE (1 << 2) ++#define ASIC3_OWM_INTEN_ETMT (1 << 3) ++#define ASIC3_OWM_INTEN_ERBF (1 << 4) ++ ++#define ASIC3_OWM_CLKDIV_PRE (3 << 0) /* two bits wide at bit position 0 */ ++#define ASIC3_OWM_CLKDIV_DIV (7 << 2) /* 3 bits wide at bit position 2 */ ++ ++ ++/***************************************************************************** ++ * The SD configuration registers are at a completely different location ++ * in memory. They are divided into three sets of registers: ++ * ++ * SD_CONFIG Core configuration register ++ * SD_CTRL Control registers for SD operations ++ * SDIO_CTRL Control registers for SDIO operations ++ * ++ *****************************************************************************/ ++ ++#define IPAQ_ASIC3_SD_CONFIG(_b, s,x) \ ++ (*((volatile s *) ((_b) + _IPAQ_ASIC3_SD_CONFIG_Base + (_IPAQ_ASIC3_SD_CONFIG_ ## x)))) ++ ++#define _IPAQ_ASIC3_SD_CONFIG_Base 0x0400 // Assumes 32 bit addressing ++ ++#define _IPAQ_ASIC3_SD_CONFIG_Command 0x08 /* R/W: Command */ ++#define _IPAQ_ASIC3_SD_CONFIG_Addr0 0x20 /* [9:31] SD Control Register Base Address */ ++#define _IPAQ_ASIC3_SD_CONFIG_Addr1 0x24 /* [9:31] SD Control Register Base Address */ ++#define _IPAQ_ASIC3_SD_CONFIG_IntPin 0x78 /* R/O: interrupt assigned to pin */ ++#define _IPAQ_ASIC3_SD_CONFIG_ClkStop 0x80 /* Set to 0x1f to clock SD controller, 0 otherwise. */ ++ /* at 0x82 - Gated Clock Control */ ++#define _IPAQ_ASIC3_SD_CONFIG_ClockMode 0x84 /* Control clock of SD controller */ ++#define _IPAQ_ASIC3_SD_CONFIG_SDHC_PinStatus 0x88 /* R/0: read status of SD pins */ ++#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Power1 0x90 /* Power1 - manual power control */ ++ /* Power2 is at 0x92 - auto power up after card inserted */ ++#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Power3 0x94 /* auto power down when card removed */ ++#define _IPAQ_ASIC3_SD_CONFIG_SDHC_CardDetect 0x98 /* */ ++#define _IPAQ_ASIC3_SD_CONFIG_SDHC_Slot 0xA0 /* R/O: define support slot number */ ++#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk1 0x1E0 /* Could be used for gated clock (don't use) */ ++#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk2 0x1E2 /* Could be used for gated clock (don't use) */ ++#define _IPAQ_ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable 0x1E8 /* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */ ++#define _IPAQ_ASIC3_SD_CONFIG_SDHC_GPIO_Status 0x1EC /* GPIO Status Reg. */ ++#define _IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk3 0x1F0 /* Bit 1: double buffer/single buffer */ ++ ++#define IPAQ_ASIC3_SD_CONFIG_Command(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, Command ) ++#define IPAQ_ASIC3_SD_CONFIG_Addr0(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, Addr0 ) ++#define IPAQ_ASIC3_SD_CONFIG_Addr1(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, Addr1 ) ++#define IPAQ_ASIC3_SD_CONFIG_IntPin(_b) IPAQ_ASIC3_SD_CONFIG(_b, u8, IntPin ) ++#define IPAQ_ASIC3_SD_CONFIG_ClkStop(_b) IPAQ_ASIC3_SD_CONFIG(_b, u8, ClkStop ) ++#define IPAQ_ASIC3_SD_CONFIG_ClockMode(_b) IPAQ_ASIC3_SD_CONFIG(_b, u8, ClockMode ) ++#define IPAQ_ASIC3_SD_CONFIG_SDHC_PinStatus(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_PinStatus ) ++#define IPAQ_ASIC3_SD_CONFIG_SDHC_Power1(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Power1 ) ++#define IPAQ_ASIC3_SD_CONFIG_SDHC_Power3(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Power3 ) ++#define IPAQ_ASIC3_SD_CONFIG_SDHC_CardDetect(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_CardDetect ) ++#define IPAQ_ASIC3_SD_CONFIG_SDHC_Slot(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_Slot ) ++#define IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk1(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_ExtGateClk1 ) ++#define IPAQ_ASIC3_SD_CONFIG_SDHC_ExtGateClk3(_b) IPAQ_ASIC3_SD_CONFIG(_b, u16, SDHC_ExtGateClk3 ) ++ ++#define SD_CONFIG_ ++ ++#define SD_CONFIG_COMMAND_MAE (1<<1) /* Memory access enable (set to 1 to access SD Controller) */ ++ ++#define SD_CONFIG_CLK_ENABLE_ALL 0x1f ++ ++#define SD_CONFIG_POWER1_PC_33V 0x0200 /* Set for 3.3 volts */ ++#define SD_CONFIG_POWER1_PC_OFF 0x0000 /* Turn off power */ ++ ++#define SD_CONFIG_CARDDETECTMODE_CLK ((x)&0x3) /* two bits - number of cycles for card detection */ ++ ++ ++#define _IPAQ_ASIC3_SD_CTRL_Base 0x1000 ++ ++#define IPAQ_ASIC3_SD(_b, s,x) \ ++ (*((volatile s *) ((_b) + _IPAQ_ASIC3_SD_CTRL_Base + (_IPAQ_ASIC3_SD_CTRL_ ## x)))) ++ ++#define _IPAQ_ASIC3_SD_CTRL_Cmd 0x00 ++#define _IPAQ_ASIC3_SD_CTRL_Arg0 0x08 ++#define _IPAQ_ASIC3_SD_CTRL_Arg1 0x0C ++#define _IPAQ_ASIC3_SD_CTRL_StopInternal 0x10 ++#define _IPAQ_ASIC3_SD_CTRL_TransferSectorCount 0x14 ++#define _IPAQ_ASIC3_SD_CTRL_Response0 0x18 ++#define _IPAQ_ASIC3_SD_CTRL_Response1 0x1C ++#define _IPAQ_ASIC3_SD_CTRL_Response2 0x20 ++#define _IPAQ_ASIC3_SD_CTRL_Response3 0x24 ++#define _IPAQ_ASIC3_SD_CTRL_Response4 0x28 ++#define _IPAQ_ASIC3_SD_CTRL_Response5 0x2C ++#define _IPAQ_ASIC3_SD_CTRL_Response6 0x30 ++#define _IPAQ_ASIC3_SD_CTRL_Response7 0x34 ++#define _IPAQ_ASIC3_SD_CTRL_CardStatus 0x38 ++#define _IPAQ_ASIC3_SD_CTRL_BufferCtrl 0x3C ++#define _IPAQ_ASIC3_SD_CTRL_IntMaskCard 0x40 ++#define _IPAQ_ASIC3_SD_CTRL_IntMaskBuffer 0x44 ++#define _IPAQ_ASIC3_SD_CTRL_CardClockCtrl 0x48 ++#define _IPAQ_ASIC3_SD_CTRL_MemCardXferDataLen 0x4C ++#define _IPAQ_ASIC3_SD_CTRL_MemCardOptionSetup 0x50 ++#define _IPAQ_ASIC3_SD_CTRL_ErrorStatus0 0x58 ++#define _IPAQ_ASIC3_SD_CTRL_ErrorStatus1 0x5C ++#define _IPAQ_ASIC3_SD_CTRL_DataPort 0x60 ++#define _IPAQ_ASIC3_SD_CTRL_TransactionCtrl 0x68 ++#define _IPAQ_ASIC3_SD_CTRL_SoftwareReset 0x1C0 ++ ++#define IPAQ_ASIC3_SD_CTRL_Cmd(_b) IPAQ_ASIC3_SD( _b, u16, Cmd ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_Arg0(_b) IPAQ_ASIC3_SD( _b, u16, Arg0 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_Arg1(_b) IPAQ_ASIC3_SD( _b, u16, Arg1 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_StopInternal(_b) IPAQ_ASIC3_SD( _b, u16, StopInternal ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_TransferSectorCount(_b) IPAQ_ASIC3_SD( _b, u16, TransferSectorCount ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_Response0(_b) IPAQ_ASIC3_SD( _b, u16, Response0 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_Response1(_b) IPAQ_ASIC3_SD( _b, u16, Response1 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_Response2(_b) IPAQ_ASIC3_SD( _b, u16, Response2 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_Response3(_b) IPAQ_ASIC3_SD( _b, u16, Response3 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_Response4(_b) IPAQ_ASIC3_SD( _b, u16, Response4 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_Response5(_b) IPAQ_ASIC3_SD( _b, u16, Response5 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_Response6(_b) IPAQ_ASIC3_SD( _b, u16, Response6 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_Response7(_b) IPAQ_ASIC3_SD( _b, u16, Response7 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_CardStatus(_b) IPAQ_ASIC3_SD( _b, u16, CardStatus ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_BufferCtrl(_b) IPAQ_ASIC3_SD( _b, u16, BufferCtrl ) /* and error status*/ ++#define IPAQ_ASIC3_SD_CTRL_IntMaskCard(_b) IPAQ_ASIC3_SD( _b, u16, IntMaskCard ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_IntMaskBuffer(_b) IPAQ_ASIC3_SD( _b, u16, IntMaskBuffer ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_CardClockCtrl(_b) IPAQ_ASIC3_SD( _b, u16, CardClockCtrl ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_MemCardXferDataLen(_b) IPAQ_ASIC3_SD( _b, u16, MemCardXferDataLen ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_MemCardOptionSetup(_b) IPAQ_ASIC3_SD( _b, u16, MemCardOptionSetup ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_ErrorStatus0(_b) IPAQ_ASIC3_SD( _b, u16, ErrorStatus0 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_ErrorStatus1(_b) IPAQ_ASIC3_SD( _b, u16, ErrorStatus1 ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_DataPort(_b) IPAQ_ASIC3_SD( _b, u16, DataPort ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_TransactionCtrl(_b) IPAQ_ASIC3_SD( _b, u16, TransactionCtrl ) /* */ ++#define IPAQ_ASIC3_SD_CTRL_SoftwareReset(_b) IPAQ_ASIC3_SD( _b, u16, SoftwareReset ) /* */ ++ ++#define SD_CTRL_SOFTWARE_RESET_CLEAR (1<<0) ++ ++#define SD_CTRL_TRANSACTIONCONTROL_SET (1<<8) // 0x0100 ++ ++#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD (1<<15)// 0x8000 ++#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK (1<<8) // 0x0100 ++#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512 (1<<7) // 0x0080 ++#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256 (1<<6) // 0x0040 ++#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128 (1<<5) // 0x0020 ++#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64 (1<<4) // 0x0010 ++#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32 (1<<3) // 0x0008 ++#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16 (1<<2) // 0x0004 ++#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8 (1<<1) // 0x0002 ++#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4 (1<<0) // 0x0001 ++#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2 (0<<0) // 0x0000 ++ ++#define MEM_CARD_OPTION_REQUIRED 0x000e ++#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x) (((x)&0x0f)<<4) /* Four bits */ ++#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT (1<<14) // 0x4000 ++#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1 (1<<15) // 0x8000 ++#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4 (0<<15) //~0x8000 ++ ++#define SD_CTRL_COMMAND_INDEX(x) ((x)&0x3f) /* 0=CMD0, 1=CMD1, ..., 63=CMD63 */ ++#define SD_CTRL_COMMAND_TYPE_CMD (0 << 6) ++#define SD_CTRL_COMMAND_TYPE_ACMD (1 << 6) ++#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION (2 << 6) ++#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL (0 << 8) ++#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1 (4 << 8) ++#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B (5 << 8) ++#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2 (6 << 8) ++#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3 (7 << 8) ++#define SD_CTRL_COMMAND_DATA_PRESENT (1 << 11) ++#define SD_CTRL_COMMAND_TRANSFER_READ (1 << 12) ++#define SD_CTRL_COMMAND_TRANSFER_WRITE (0 << 12) ++#define SD_CTRL_COMMAND_MULTI_BLOCK (1 << 13) ++#define SD_CTRL_COMMAND_SECURITY_CMD (1 << 14) ++ ++#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12 (1 << 0) ++#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12 (1 << 8) ++ ++#define SD_CTRL_CARDSTATUS_RESPONSE_END (1 << 0) ++#define SD_CTRL_CARDSTATUS_RW_END (1 << 2) ++#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0 (1 << 3) ++#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0 (1 << 4) ++#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0 (1 << 5) ++#define SD_CTRL_CARDSTATUS_WRITE_PROTECT (1 << 7) ++#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3 (1 << 8) ++#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3 (1 << 9) ++#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3 (1 << 10) ++ ++#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR (1 << 0) // 0x0001 ++#define SD_CTRL_BUFFERSTATUS_CRC_ERROR (1 << 1) // 0x0002 ++#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR (1 << 2) // 0x0004 ++#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT (1 << 3) // 0x0008 ++#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW (1 << 4) // 0x0010 ++#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW (1 << 5) // 0x0020 ++#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT (1 << 6) // 0x0040 ++#define SD_CTRL_BUFFERSTATUS_UNK7 (1 << 7) // 0x0080 ++#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE (1 << 8) // 0x0100 ++#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE (1 << 9) // 0x0200 ++#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION (1 << 13)// 0x2000 ++#define SD_CTRL_BUFFERSTATUS_CMD_BUSY (1 << 14)// 0x4000 ++#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS (1 << 15)// 0x8000 ++ ++#define SD_CTRL_INTMASKCARD_RESPONSE_END (1 << 0) // 0x0001 ++#define SD_CTRL_INTMASKCARD_RW_END (1 << 2) // 0x0004 ++#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0 (1 << 3) // 0x0008 ++#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0 (1 << 4) // 0x0010 ++#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5) // 0x0020 ++#define SD_CTRL_INTMASKCARD_UNK6 (1 << 6) // 0x0040 ++#define SD_CTRL_INTMASKCARD_WRITE_PROTECT (1 << 7) // 0x0080 ++#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3 (1 << 8) // 0x0100 ++#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3 (1 << 9) // 0x0200 ++#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10)// 0x0400 ++ ++#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR (1 << 0) // 0x0001 ++#define SD_CTRL_INTMASKBUFFER_CRC_ERROR (1 << 1) // 0x0002 ++#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR (1 << 2) // 0x0004 ++#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT (1 << 3) // 0x0008 ++#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW (1 << 4) // 0x0010 ++#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW (1 << 5) // 0x0020 ++#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT (1 << 6) // 0x0040 ++#define SD_CTRL_INTMASKBUFFER_UNK7 (1 << 7) // 0x0080 ++#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE (1 << 8) // 0x0100 ++#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE (1 << 9) // 0x0200 ++#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION (1 << 13)// 0x2000 ++#define SD_CTRL_INTMASKBUFFER_CMD_BUSY (1 << 14)// 0x4000 ++#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS (1 << 15)// 0x8000 ++ ++#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR (1 << 0) // 0x0001 ++#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2) // 0x0004 ++#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12 (1 << 3) // 0x0008 ++#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA (1 << 4) // 0x0010 ++#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS (1 << 5) // 0x0020 ++#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 8) // 0x0100 ++#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12 (1 << 9) // 0x0200 ++#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA (1 << 10)// 0x0400 ++#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD (1 << 11)// 0x0800 ++ ++#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE (1 << 0) // 0x0001 ++#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA (1 << 4) // 0x0010 ++#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS (1 << 5) // 0x0020 ++#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY (1 << 6) // 0x0040 ++ ++#define _IPAQ_ASIC3_SDIO_CTRL_Base 0x1200 ++ ++#define IPAQ_ASIC3_SDIO(_b, s,x) \ ++ (*((volatile s *) ((_b) + _IPAQ_ASIC3_SDIO_CTRL_Base + (_IPAQ_ASIC3_SDIO_CTRL_ ## x)))) ++ ++#define _IPAQ_ASIC3_SDIO_CTRL_Cmd 0x00 ++#define _IPAQ_ASIC3_SDIO_CTRL_CardPortSel 0x04 ++#define _IPAQ_ASIC3_SDIO_CTRL_Arg0 0x08 ++#define _IPAQ_ASIC3_SDIO_CTRL_Arg1 0x0C ++#define _IPAQ_ASIC3_SDIO_CTRL_TransferBlockCount 0x14 ++#define _IPAQ_ASIC3_SDIO_CTRL_Response0 0x18 ++#define _IPAQ_ASIC3_SDIO_CTRL_Response1 0x1C ++#define _IPAQ_ASIC3_SDIO_CTRL_Response2 0x20 ++#define _IPAQ_ASIC3_SDIO_CTRL_Response3 0x24 ++#define _IPAQ_ASIC3_SDIO_CTRL_Response4 0x28 ++#define _IPAQ_ASIC3_SDIO_CTRL_Response5 0x2C ++#define _IPAQ_ASIC3_SDIO_CTRL_Response6 0x30 ++#define _IPAQ_ASIC3_SDIO_CTRL_Response7 0x34 ++#define _IPAQ_ASIC3_SDIO_CTRL_CardStatus 0x38 ++#define _IPAQ_ASIC3_SDIO_CTRL_BufferCtrl 0x3C ++#define _IPAQ_ASIC3_SDIO_CTRL_IntMaskCard 0x40 ++#define _IPAQ_ASIC3_SDIO_CTRL_IntMaskBuffer 0x44 ++#define _IPAQ_ASIC3_SDIO_CTRL_CardXferDataLen 0x4C ++#define _IPAQ_ASIC3_SDIO_CTRL_CardOptionSetup 0x50 ++#define _IPAQ_ASIC3_SDIO_CTRL_ErrorStatus0 0x54 ++#define _IPAQ_ASIC3_SDIO_CTRL_ErrorStatus1 0x58 ++#define _IPAQ_ASIC3_SDIO_CTRL_DataPort 0x60 ++#define _IPAQ_ASIC3_SDIO_CTRL_TransactionCtrl 0x68 ++#define _IPAQ_ASIC3_SDIO_CTRL_CardIntCtrl 0x6C ++#define _IPAQ_ASIC3_SDIO_CTRL_ClocknWaitCtrl 0x70 ++#define _IPAQ_ASIC3_SDIO_CTRL_HostInformation 0x74 ++#define _IPAQ_ASIC3_SDIO_CTRL_ErrorCtrl 0x78 ++#define _IPAQ_ASIC3_SDIO_CTRL_LEDCtrl 0x7C ++#define _IPAQ_ASIC3_SDIO_CTRL_SoftwareReset 0x1C0 ++ ++#define IPAQ_ASIC3_SDIO_CTRL_Cmd(_b) IPAQ_ASIC3_SDIO( _b, u16, Cmd ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_CardPortSel(_b) IPAQ_ASIC3_SDIO( _b, u16, CardPortSel ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_Arg0(_b) IPAQ_ASIC3_SDIO( _b, u16, Arg0 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_Arg1(_b) IPAQ_ASIC3_SDIO( _b, u16, Arg1 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_TransferBlockCount(_b) IPAQ_ASIC3_SDIO( _b, u16, TransferBlockCount ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_Response0(_b) IPAQ_ASIC3_SDIO( _b, u16, Response0 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_Response1(_b) IPAQ_ASIC3_SDIO( _b, u16, Response1 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_Response2(_b) IPAQ_ASIC3_SDIO( _b, u16, Response2 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_Response3(_b) IPAQ_ASIC3_SDIO( _b, u16, Response3 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_Response4(_b) IPAQ_ASIC3_SDIO( _b, u16, Response4 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_Response5(_b) IPAQ_ASIC3_SDIO( _b, u16, Response5 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_Response6(_b) IPAQ_ASIC3_SDIO( _b, u16, Response6 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_Response7(_b) IPAQ_ASIC3_SDIO( _b, u16, Response7 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_CardStatus(_b) IPAQ_ASIC3_SDIO( _b, u16, CardStatus ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_BufferCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, BufferCtrl ) /* and error status*/ ++#define IPAQ_ASIC3_SDIO_CTRL_IntMaskCard(_b) IPAQ_ASIC3_SDIO( _b, u16, IntMaskCard ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_IntMaskBuffer(_b) IPAQ_ASIC3_SDIO( _b, u16, IntMaskBuffer ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_CardXferDataLen(_b) IPAQ_ASIC3_SDIO( _b, u16, CardXferDataLen ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_CardOptionSetup(_b) IPAQ_ASIC3_SDIO( _b, u16, CardOptionSetup ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_ErrorStatus0(_b) IPAQ_ASIC3_SDIO( _b, u16, ErrorStatus0 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_ErrorStatus1(_b) IPAQ_ASIC3_SDIO( _b, u16, ErrorStatus1 ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_DataPort(_b) IPAQ_ASIC3_SDIO( _b, u16, DataPort ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_TransactionCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, TransactionCtrl ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_CardIntCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, CardIntCtrl ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_ClocknWaitCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, ClocknWaitCtrl ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_HostInformation(_b) IPAQ_ASIC3_SDIO( _b, u16, HostInformation ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_ErrorCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, ErrorCtrl ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_LEDCtrl(_b) IPAQ_ASIC3_SDIO( _b, u16, LEDCtrl ) /* */ ++#define IPAQ_ASIC3_SDIO_CTRL_SoftwareReset(_b) IPAQ_ASIC3_SDIO( _b, u16, SoftwareReset ) /* */ ++ ++#define IPAQ_ASIC3_MAP_SIZE 0x2000 ++ ++#endif +Index: linux-2.6.23/include/linux/gpiodev.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/linux/gpiodev.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,44 @@ ++#ifndef __GPIODEV_H ++#define __GPIODEV_H ++ ++#include ++#include ++#include ++ ++/* Interface */ ++ ++/* This structure must be first member of device platform_data structure ++ of a device which provides gpiodev interface. All method pointers ++ must be non-NULL, so stubs must be used for non-implemented ones. */ ++struct gpiodev_ops { ++ int (*get)(struct device *this, unsigned gpio_no); ++ void (*set)(struct device *this, unsigned gpio_no, int val); ++ int (*to_irq)(struct device *this, unsigned gpio_no); ++}; ++ ++/* Generalized GPIO structure */ ++ ++struct gpio { ++ struct device *gpio_dev; ++ unsigned gpio_no; ++}; ++ ++/* API functions */ ++ ++static inline int gpiodev_get_value(struct gpio *gpio) ++{ ++ struct gpiodev_ops *ops = gpio->gpio_dev->platform_data; ++ return ops->get(gpio->gpio_dev, gpio->gpio_no); ++} ++static inline void gpiodev_set_value(struct gpio *gpio, int val) ++{ ++ struct gpiodev_ops *ops = gpio->gpio_dev->platform_data; ++ ops->set(gpio->gpio_dev, gpio->gpio_no, val); ++} ++static inline int gpiodev_to_irq(struct gpio *gpio) ++{ ++ struct gpiodev_ops *ops = gpio->gpio_dev->platform_data; ++ return ops->to_irq(gpio->gpio_dev, gpio->gpio_no); ++} ++ ++#endif /* __GPIODEV_H */ +Index: linux-2.6.23/include/linux/input_pda.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/linux/input_pda.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,47 @@ ++#ifndef _INPUT_PDA_H ++#define _INPUT_PDA_H ++ ++/* ++ * This is temporary virtual button key codes map ++ * for keyboardless handheld computers. ++ * Its purpose is to provide map common to all devices ++ * and known to work with current software and its bugs ++ * and misfeatures. Once issues with the software are ++ * solved, codes from input.h will be used directly ++ * (missing key definitions will be added). ++ */ ++ ++/* Some directly usable keycodes: ++KEY_POWER - Power/suspend button ++KEY_ENTER - Enter/Action/Central button on joypad ++KEY_UP ++KEY_DOWN ++KEY_LEFT ++KEY_RIGHT ++*/ ++ ++/* XXX Instead of using any values in include/linux/input.h, we have to use ++ use values < 128 due to some munging that kdrive does to get keystrokes. ++ When kdrive gets its key events from evdev instead of the console, ++ we should be able to switch to using input.h values and get rid of ++ xmodmap. */ ++ ++#define _KEY_APP1 KEY_F9 // xmodmap sees 67 + 8 = 75 ++#define _KEY_APP2 KEY_F10 // xmodmap 76 ++#define _KEY_APP3 KEY_F11 // xmodmap 95 ++#define _KEY_APP4 KEY_F12 // xmodmap 96 ++ ++#define _KEY_RECORD KEY_RO ++ ++/* It is highly recommended to use exactly 4 codes above for ++ 4 buttons the device has. This will ensure that console and ++ framebuffer applications (e.g. games) will work ok on all ++ devices. If you'd like more distinguishable names, following ++ convenience defines are provided, suiting many devices. */ ++ ++#define _KEY_CALENDAR _KEY_APP1 ++#define _KEY_CONTACTS _KEY_APP2 ++#define _KEY_MAIL _KEY_APP3 ++#define _KEY_HOMEPAGE _KEY_APP4 ++ ++#endif +Index: linux-2.6.23/include/linux/soc/asic3_base.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/linux/soc/asic3_base.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,104 @@ ++#include ++#include ++ ++/* Private API - for ASIC3 devices internal use only */ ++#define HDR_IPAQ_ASIC3_ACTION(ACTION,action,fn,FN) \ ++u32 asic3_get_gpio_ ## action ## _ ## fn (struct device *dev); \ ++void asic3_set_gpio_ ## action ## _ ## fn (struct device *dev, u32 bits, u32 val); ++ ++#define HDR_IPAQ_ASIC3_FN(fn,FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( MASK,mask,fn,FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( DIR, dir, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( OUT, out, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( LEVELTRI, trigtype, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( RISING, rising, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( LEVEL, triglevel, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( SLEEP_MASK, sleepmask, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( SLEEP_OUT, sleepout, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( BATT_FAULT_OUT, battfaultout, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( INT_STATUS, intstatus, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( ALT_FUNCTION, alt_fn, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( SLEEP_CONF, sleepconf, fn, FN) \ ++ HDR_IPAQ_ASIC3_ACTION ( STATUS, status, fn, FN) ++ ++/* Public API */ ++ ++#define ASIC3_GPIOA_IRQ_BASE 0 ++#define ASIC3_GPIOB_IRQ_BASE 16 ++#define ASIC3_GPIOC_IRQ_BASE 32 ++#define ASIC3_GPIOD_IRQ_BASE 48 ++#define ASIC3_LED0_IRQ 64 ++#define ASIC3_LED1_IRQ 65 ++#define ASIC3_LED2_IRQ 66 ++#define ASIC3_SPI_IRQ 67 ++#define ASIC3_SMBUS_IRQ 68 ++#define ASIC3_OWM_IRQ 69 ++ ++#define ASIC3_NR_GPIO_IRQS 64 /* 16 bits each GPIO A...D banks */ ++#define ASIC3_NR_IRQS (ASIC3_OWM_IRQ + 1) ++ ++extern int asic3_irq_base(struct device *dev); ++ ++extern void asic3_write_register(struct device *dev, unsigned int reg, ++ u32 value); ++extern u32 asic3_read_register(struct device *dev, unsigned int reg); ++ ++/* old clock api */ ++extern void asic3_set_clock_sel(struct device *dev, u32 bits, u32 val); ++extern u32 asic3_get_clock_cdex(struct device *dev); ++extern void asic3_set_clock_cdex(struct device *dev, u32 bits, u32 val); ++ ++extern void asic3_set_extcf_select(struct device *dev, u32 bits, u32 val); ++extern void asic3_set_extcf_reset(struct device *dev, u32 bits, u32 val); ++extern void asic3_set_sdhwctrl(struct device *dev, u32 bits, u32 val); ++ ++extern void asic3_set_led(struct device *dev, int led_num, int duty_time, ++ int cycle_time, int timebase); ++ ++extern int asic3_register_mmc(struct device *dev); ++extern int asic3_unregister_mmc(struct device *dev); ++ ++/* Accessors for GPIO banks */ ++HDR_IPAQ_ASIC3_FN(a, A) ++HDR_IPAQ_ASIC3_FN(b, B) ++HDR_IPAQ_ASIC3_FN(c, C) ++HDR_IPAQ_ASIC3_FN(d, D) ++ ++#define _IPAQ_ASIC3_GPIO_BANK_A 0 ++#define _IPAQ_ASIC3_GPIO_BANK_B 1 ++#define _IPAQ_ASIC3_GPIO_BANK_C 2 ++#define _IPAQ_ASIC3_GPIO_BANK_D 3 ++ ++#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf)) ++ ++extern int asic3_get_gpio_bit(struct device *dev, int gpio); ++extern void asic3_set_gpio_bit(struct device *dev, int gpio, int val); ++extern int asic3_gpio_get_value(struct device *dev, unsigned gpio); ++extern void asic3_gpio_set_value(struct device *dev, unsigned gpio, int val); ++ ++ ++struct tmio_mmc_hwconfig; ++ ++struct asic3_platform_data ++{ ++ // Must be first member ++ struct gpiodev_ops gpiodev_ops; ++ ++ struct { ++ u32 dir; ++ u32 init; ++ u32 sleep_mask; ++ u32 sleep_out; ++ u32 batt_fault_out; ++ u32 sleep_conf; ++ u32 alt_function; ++ } gpio_a, gpio_b, gpio_c, gpio_d; ++ ++ int irq_base; ++ unsigned int bus_shift; ++ ++ struct platform_device **child_platform_devs; ++ int num_child_platform_devs; ++ ++ struct tmio_mmc_hwconfig *tmio_mmc_hwconfig; ++}; +Index: linux-2.6.23/include/linux/soc/tmio_mmc.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/linux/soc/tmio_mmc.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,17 @@ ++#include ++ ++#define MMC_CLOCK_DISABLED 0 ++#define MMC_CLOCK_ENABLED 1 ++ ++#define TMIO_WP_ALWAYS_RW ((void*)-1) ++ ++struct tmio_mmc_hwconfig { ++ void (*hwinit)(struct platform_device *sdev); ++ void (*set_mmc_clock)(struct platform_device *sdev, int state); ++ ++ /* NULL - use ASIC3 signal, ++ TMIO_WP_ALWAYS_RW - assume always R/W (e.g. miniSD) ++ otherwise - machine-specific handler */ ++ int (*mmc_get_ro)(struct platform_device *pdev); ++ short address_shift; ++}; +Index: linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h +=================================================================== +--- linux-2.6.23.orig/include/asm-arm/arch-pxa/pxa-regs.h 2008-01-20 18:59:40.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h 2008-01-20 18:59:46.000000000 +0000 +@@ -2058,6 +2058,8 @@ + #define LDCMD_SOFINT (1 << 22) + #define LDCMD_EOFINT (1 << 21) + ++#define LCCR4_13M_PCD_EN (1<<25) /* 13M PCD enable */ ++#define LCCR4_PCDDIV (1<<31) /* PCD selection */ + + #define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ + #define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ +Index: linux-2.6.23/drivers/mmc/host/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/mmc/host/Kconfig 2008-01-20 18:59:18.000000000 +0000 ++++ linux-2.6.23/drivers/mmc/host/Kconfig 2008-01-20 18:59:46.000000000 +0000 +@@ -130,3 +130,9 @@ config MMC_SPI + + If unsure, or if your system has no SPI master driver, say N. + ++config MMC_ASIC3 ++ tristate "HTC ASIC3 SD/MMC support" ++ depends on MMC && HTC_ASIC3 ++ help ++ This provides support for the ASIC3 SD/MMC controller, used ++ in the iPAQ hx4700 and others. +Index: linux-2.6.23/drivers/mmc/host/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/mmc/host/Makefile 2008-01-20 18:59:18.000000000 +0000 ++++ linux-2.6.23/drivers/mmc/host/Makefile 2008-01-20 21:12:10.000000000 +0000 +@@ -13,6 +13,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o + obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o + obj-$(CONFIG_MMC_WBSD) += wbsd.o + obj-$(CONFIG_MMC_AU1X) += au1xmmc.o ++obj-$(CONFIG_MMC_ASIC3) += asic3_mmc.o + obj-$(CONFIG_MMC_OMAP) += omap.o + obj-$(CONFIG_MMC_AT91) += at91_mci.o + obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o +Index: linux-2.6.23/drivers/mmc/host/asic3_mmc.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/mmc/host/asic3_mmc.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,900 @@ ++/* Note that this driver can likely be merged into the tmio driver, so ++ * consider this code temporary. It works, though. ++ */ ++/* ++ * linux/drivers/mmc/asic3_mmc.c ++ * ++ * Copyright (c) 2005 SDG Systems, LLC ++ * ++ * based on tmio_mmc.c ++ * Copyright (C) 2004 Ian Molton ++ * ++ * Refactored to support all ASIC3 devices, 2006 Paul Sokolovsky ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Driver for the SD / SDIO cell found in: ++ * ++ * TC6393XB ++ * ++ * This driver draws mainly on scattered spec sheets, Reverse engineering ++ * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit ++ * support). ++ * ++ * Supports MMC 1 bit transfers and SD 1 and 4 bit modes. ++ * ++ * TODO: ++ * Eliminate FIXMEs ++ * SDIO support ++ * Power management ++ * Handle MMC errors (at all) ++ * ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++//#include ++#include ++#include ++//#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "asic3_mmc.h" ++ ++struct asic3_mmc_host { ++ void *ctl_base; ++ struct device *asic3_dev; /* asic3 device */ ++ struct tmio_mmc_hwconfig *hwconfig; /* HW config data/handlers, guaranteed != NULL */ ++ unsigned long bus_shift; ++ struct mmc_command *cmd; ++ struct mmc_request *mrq; ++ struct mmc_data *data; ++ struct mmc_host *mmc; ++ int irq; ++ unsigned short clock_for_sd; ++ ++ /* I/O related stuff */ ++ struct scatterlist *sg_ptr; ++ unsigned int sg_len; ++ unsigned int sg_off; ++}; ++ ++static void ++mmc_finish_request(struct asic3_mmc_host *host) ++{ ++ struct mmc_request *mrq = host->mrq; ++ ++ /* Write something to end the command */ ++ host->mrq = NULL; ++ host->cmd = NULL; ++ host->data = NULL; ++ ++ mmc_request_done(host->mmc, mrq); ++} ++ ++ ++#define ASIC3_MMC_REG(host, block, reg) (*((volatile u16 *) ((host->ctl_base) + ((_IPAQ_ASIC3_## block ## _Base + _IPAQ_ASIC3_ ## block ## _ ## reg) >> (2 - host->bus_shift))) )) ++ ++static void ++mmc_start_command(struct asic3_mmc_host *host, struct mmc_command *cmd) ++{ ++ struct mmc_data *data = host->data; ++ int c = cmd->opcode; ++ ++ DBG("Opcode: %d, base: %p\n", cmd->opcode, host->ctl_base); ++ ++ if(cmd->opcode == MMC_STOP_TRANSMISSION) { ++ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12; ++ cmd->resp[0] = cmd->opcode; ++ cmd->resp[1] = 0; ++ cmd->resp[2] = 0; ++ cmd->resp[3] = 0; ++ cmd->resp[4] = 0; ++ return; ++ } ++ ++ switch(cmd->flags & 0x1f) { ++ case MMC_RSP_NONE: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL; break; ++ case MMC_RSP_R1: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1; break; ++ case MMC_RSP_R1B: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B; break; ++ case MMC_RSP_R2: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2; break; ++ case MMC_RSP_R3: c |= SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3; break; ++ default: ++ DBG("Unknown response type %d\n", cmd->flags & 0x1f); ++ break; ++ } ++ ++ host->cmd = cmd; ++ ++ if(cmd->opcode == MMC_APP_CMD) { ++ c |= APP_CMD; ++ } ++ if (cmd->opcode == MMC_GO_IDLE_STATE) { ++ c |= (3 << 8); /* This was removed from ipaq-asic3.h for some reason */ ++ } ++ if(data) { ++ c |= SD_CTRL_COMMAND_DATA_PRESENT; ++ if(data->blocks > 1) { ++ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12; ++ c |= SD_CTRL_COMMAND_MULTI_BLOCK; ++ } ++ if(data->flags & MMC_DATA_READ) { ++ c |= SD_CTRL_COMMAND_TRANSFER_READ; ++ } ++ /* MMC_DATA_WRITE does not require a bit to be set */ ++ } ++ ++ /* Enable the command and data interrupts */ ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( ++ SD_CTRL_INTMASKCARD_RESPONSE_END ++ | SD_CTRL_INTMASKCARD_RW_END ++ | SD_CTRL_INTMASKCARD_CARD_REMOVED_0 ++ | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 ++#if 0 ++ | SD_CTRL_INTMASKCARD_CARD_REMOVED_3 ++ | SD_CTRL_INTMASKCARD_CARD_INSERTED_3 ++#endif ++ ); ++ ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) = ~( ++ SD_CTRL_INTMASKBUFFER_UNK7 ++ | SD_CTRL_INTMASKBUFFER_CMD_BUSY ++#if 0 ++ | SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR ++ | SD_CTRL_INTMASKBUFFER_CRC_ERROR ++ | SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR ++ | SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT ++ | SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW ++ | SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW ++ | SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT ++ | SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE ++ | SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE ++ | SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS ++#endif ++ ); ++ ++ /* Send the command */ ++ ASIC3_MMC_REG(host, SD_CTRL, Arg1) = cmd->arg >> 16; ++ ASIC3_MMC_REG(host, SD_CTRL, Arg0) = cmd->arg & 0xffff; ++ ASIC3_MMC_REG(host, SD_CTRL, Cmd) = c; ++} ++ ++/* This chip always returns (at least?) as much data as you ask for. I'm ++ * unsure what happens if you ask for less than a block. This should be looked ++ * into to ensure that a funny length read doesnt mess up the controller data ++ * state machine. ++ * ++ * Aric: Statement above may not apply to ASIC3. ++ * ++ * FIXME - this chip cannot do 1 and 2 byte data requests in 4 bit mode ++ * ++ * Aric: Statement above may not apply to ASIC3. ++ */ ++ ++static struct tasklet_struct mmc_data_read_tasklet; ++ ++static void ++mmc_data_transfer(unsigned long h) ++{ ++ struct asic3_mmc_host *host = (struct asic3_mmc_host *)h; ++ struct mmc_data *data = host->data; ++ unsigned short *buf; ++ int count; ++ /* unsigned long flags; */ ++ ++ if(!data){ ++ printk(KERN_WARNING DRIVER_NAME ": Spurious Data IRQ\n"); ++ return; ++ } ++ ++ /* local_irq_save(flags); */ ++ /* buf = kmap_atomic(host->sg_ptr->page, KM_BIO_SRC_IRQ); */ ++ buf = kmap(host->sg_ptr->page); ++ buf += host->sg_ptr->offset/2 + host->sg_off/2; ++ ++ /* ++ * Ensure we dont read more than one block. The chip will interrupt us ++ * When the next block is available. ++ */ ++ count = host->sg_ptr->length - host->sg_off; ++ if(count > data->blksz) { ++ count = data->blksz; ++ } ++ ++ DBG("count: %08x, page: %p, offset: %08x flags %08x\n", ++ count, host->sg_ptr->page, host->sg_off, data->flags); ++ ++ host->sg_off += count; ++ ++ /* Transfer the data */ ++ if(data->flags & MMC_DATA_READ) { ++ while(count > 0) { ++ /* Read two bytes from SD/MMC controller. */ ++ *buf = ASIC3_MMC_REG(host, SD_CTRL, DataPort); ++ buf++; ++ count -= 2; ++ } ++ //flush_dcache_page(host->sg_ptr->page); ++ } else { ++ while(count > 0) { ++ /* Write two bytes to SD/MMC controller. */ ++ ASIC3_MMC_REG(host, SD_CTRL, DataPort) = *buf; ++ buf++; ++ count -= 2; ++ } ++ } ++ ++ /* kunmap_atomic(host->sg_ptr->page, KM_BIO_SRC_IRQ); */ ++ kunmap(host->sg_ptr->page); ++ /* local_irq_restore(flags); */ ++ if(host->sg_off == host->sg_ptr->length) { ++ host->sg_ptr++; ++ host->sg_off = 0; ++ --host->sg_len; ++ } ++ ++ return; ++} ++ ++static void ++mmc_data_end_irq(struct asic3_mmc_host *host) ++{ ++ struct mmc_data *data = host->data; ++ ++ host->data = NULL; ++ ++ if(!data){ ++ printk(KERN_WARNING DRIVER_NAME ": Spurious data end IRQ\n"); ++ return; ++ } ++ ++ if (data->error == MMC_ERR_NONE) { ++ data->bytes_xfered = data->blocks * data->blksz; ++ } else { ++ data->bytes_xfered = 0; ++ } ++ ++ DBG("Completed data request\n"); ++ ++ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = 0; ++ ++ /* Make sure read enable interrupt and write enable interrupt are disabled */ ++ if(data->flags & MMC_DATA_READ) { ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) |= SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE; ++ } else { ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) |= SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE; ++ } ++ ++ mmc_finish_request(host); ++} ++ ++static void ++mmc_cmd_irq(struct asic3_mmc_host *host, unsigned int buffer_stat) ++{ ++ struct mmc_command *cmd = host->cmd; ++ u8 *buf = (u8 *)cmd->resp; ++ u16 data; ++ ++ if(!host->cmd) { ++ printk(KERN_WARNING DRIVER_NAME ": Spurious CMD irq\n"); ++ return; ++ } ++ ++ host->cmd = NULL; ++ if(cmd->flags & MMC_RSP_PRESENT && cmd->flags & MMC_RSP_136) { ++ /* R2 */ ++ buf[12] = 0xff; ++ data = ASIC3_MMC_REG(host, SD_CTRL, Response0); ++ buf[13] = data & 0xff; ++ buf[14] = data >> 8; ++ data = ASIC3_MMC_REG(host, SD_CTRL, Response1); ++ buf[15] = data & 0xff; ++ buf[8] = data >> 8; ++ data = ASIC3_MMC_REG(host, SD_CTRL, Response2); ++ buf[9] = data & 0xff; ++ buf[10] = data >> 8; ++ data = ASIC3_MMC_REG(host, SD_CTRL, Response3); ++ buf[11] = data & 0xff; ++ buf[4] = data >> 8; ++ data = ASIC3_MMC_REG(host, SD_CTRL, Response4); ++ buf[5] = data & 0xff; ++ buf[6] = data >> 8; ++ data = ASIC3_MMC_REG(host, SD_CTRL, Response5); ++ buf[7] = data & 0xff; ++ buf[0] = data >> 8; ++ data = ASIC3_MMC_REG(host, SD_CTRL, Response6); ++ buf[1] = data & 0xff; ++ buf[2] = data >> 8; ++ data = ASIC3_MMC_REG(host, SD_CTRL, Response7); ++ buf[3] = data & 0xff; ++ } else if(cmd->flags & MMC_RSP_PRESENT) { ++ /* R1, R1B, R3 */ ++ data = ASIC3_MMC_REG(host, SD_CTRL, Response0); ++ buf[0] = data & 0xff; ++ buf[1] = data >> 8; ++ data = ASIC3_MMC_REG(host, SD_CTRL, Response1); ++ buf[2] = data & 0xff; ++ buf[3] = data >> 8; ++ } ++ DBG("Response: %08x %08x %08x %08x\n", cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); ++ ++ if(buffer_stat & SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT) { ++ cmd->error = MMC_ERR_TIMEOUT; ++ } else if((buffer_stat & SD_CTRL_BUFFERSTATUS_CRC_ERROR) && (cmd->flags & MMC_RSP_CRC)) { ++ cmd->error = MMC_ERR_BADCRC; ++ } else if(buffer_stat & ++ ( ++ SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS ++ | SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR ++ | SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR ++ | SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW ++ | SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW ++ | SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT ++ ) ++ ) { ++ DBG("Buffer status ERROR 0x%04x - inside check buffer\n", buffer_stat); ++ DBG("detail0 error status 0x%04x\n", ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus0)); ++ DBG("detail1 error status 0x%04x\n", ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus1)); ++ cmd->error = MMC_ERR_FAILED; ++ } ++ ++ if(cmd->error == MMC_ERR_NONE) { ++ switch (cmd->opcode) { ++ case SD_APP_SET_BUS_WIDTH: ++ if(cmd->arg == SD_BUS_WIDTH_4) { ++ host->clock_for_sd = SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD; ++ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = ++ MEM_CARD_OPTION_REQUIRED ++ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) ++ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT ++ | MEM_CARD_OPTION_DATA_XFR_WIDTH_4; ++ } else { ++ host->clock_for_sd = 0; ++ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = ++ MEM_CARD_OPTION_REQUIRED ++ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) ++ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT ++ | MEM_CARD_OPTION_DATA_XFR_WIDTH_1; ++ } ++ break; ++ case MMC_SELECT_CARD: ++ if((cmd->arg >> 16) == 0) { ++ /* We have been deselected. */ ++ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = ++ MEM_CARD_OPTION_REQUIRED ++ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) ++ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT ++ | MEM_CARD_OPTION_DATA_XFR_WIDTH_1; ++ } ++ } ++ } ++ ++ /* ++ * If there is data to handle we enable data IRQs here, and we will ++ * ultimatley finish the request in the mmc_data_end_irq handler. ++ */ ++ if(host->data && (cmd->error == MMC_ERR_NONE)){ ++ if(host->data->flags & MMC_DATA_READ) { ++ /* Enable the read enable interrupt */ ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= ++ ~SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE; ++ } else { ++ /* Enable the write enable interrupt */ ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= ++ ~SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE; ++ } ++ } else { ++ /* There's no data, or we encountered an error, so finish now. */ ++ mmc_finish_request(host); ++ } ++ ++ return; ++} ++ ++static void hwinit2_irqsafe(struct asic3_mmc_host *host); ++ ++static irqreturn_t ++mmc_irq(int irq, void *irq_desc) ++{ ++ struct asic3_mmc_host *host; ++ unsigned int breg, bmask, bstatus, creg, cmask, cstatus; ++ ++ host = irq_desc; ++ ++ /* asic3 bstatus has errors */ ++ bstatus = ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl); ++ bmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer); ++ cstatus = ASIC3_MMC_REG(host, SD_CTRL, CardStatus); ++ cmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard); ++ breg = bstatus & ~bmask & ~DONT_CARE_BUFFER_BITS; ++ creg = cstatus & ~cmask & ~DONT_CARE_CARD_BITS; ++ ++ if (!breg && !creg) { ++ /* This occurs sometimes for no known reason. It doesn't hurt ++ * anything, so I don't print it. */ ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) &= ~breg; ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) &= ~creg; ++ goto out; ++ } ++ ++ while (breg || creg) { ++ ++ /* XXX TODO: Need to handle errors in breg here. */ ++ ++ /* ++ * Card insert/remove. The mmc controlling code is stateless. That ++ * is, it doesn't care if it was an insert or a remove. It treats ++ * both the same. ++ */ ++ /* XXX Asic3 has _3 versions of these status bits, too, for a second slot, perhaps? */ ++ if (creg & (SD_CTRL_CARDSTATUS_CARD_INSERTED_0 | SD_CTRL_CARDSTATUS_CARD_REMOVED_0)) { ++ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= ++ ~(SD_CTRL_CARDSTATUS_CARD_REMOVED_0 | SD_CTRL_CARDSTATUS_CARD_INSERTED_0); ++ if(creg & SD_CTRL_CARDSTATUS_CARD_INSERTED_0) { ++ hwinit2_irqsafe(host); ++ } ++ mmc_detect_change(host->mmc,1); ++ } ++ ++ /* Command completion */ ++ if (creg & SD_CTRL_CARDSTATUS_RESPONSE_END) { ++ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= ++ ~(SD_CTRL_CARDSTATUS_RESPONSE_END); ++ mmc_cmd_irq(host, bstatus); ++ } ++ ++ /* Data transfer */ ++ if (breg & (SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE | SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE)) { ++ ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) &= ++ ~(SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE | SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE); ++ tasklet_schedule(&mmc_data_read_tasklet); ++ } ++ ++ /* Data transfer completion */ ++ if (creg & SD_CTRL_CARDSTATUS_RW_END) { ++ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) &= ~(SD_CTRL_CARDSTATUS_RW_END); ++ mmc_data_end_irq(host); ++ } ++ ++ /* Check status - keep going until we've handled it all */ ++ bstatus = ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl); ++ bmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer); ++ cstatus = ASIC3_MMC_REG(host, SD_CTRL, CardStatus); ++ cmask = ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard); ++ breg = bstatus & ~bmask & ~DONT_CARE_BUFFER_BITS; ++ creg = cstatus & ~cmask & ~DONT_CARE_CARD_BITS; ++ } ++ ++out: ++ /* Ensure all interrupt sources are cleared */ ++ ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) = 0; ++ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) = 0; ++ return IRQ_HANDLED; ++} ++ ++static void ++mmc_start_data(struct asic3_mmc_host *host, struct mmc_data *data) ++{ ++ DBG("setup data transfer: blocksize %08x nr_blocks %d, page: %08x, offset: %08x\n", data->blksz, ++ data->blocks, (int)data->sg->page, data->sg->offset); ++ ++ host->sg_len = data->sg_len; ++ host->sg_ptr = data->sg; ++ host->sg_off = 0; ++ host->data = data; ++ ++ /* Set transfer length and blocksize */ ++ ASIC3_MMC_REG(host, SD_CTRL, TransferSectorCount) = data->blocks; ++ ASIC3_MMC_REG(host, SD_CTRL, MemCardXferDataLen) = data->blksz; ++} ++ ++/* Process requests from the MMC layer */ ++static void ++mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct asic3_mmc_host *host = mmc_priv(mmc); ++ ++ WARN_ON(host->mrq != NULL); ++ ++ host->mrq = mrq; ++ ++ /* If we're performing a data request we need to setup some ++ extra information */ ++ if(mrq->data) { ++ mmc_start_data(host, mrq->data); ++ } ++ ++ mmc_start_command(host, mrq->cmd); ++} ++ ++/* Set MMC clock / power. ++ * Note: This controller uses a simple divider scheme therefore it cannot run ++ * a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as MMC ++ * wont run that fast, it has to be clocked at 12MHz which is the next slowest ++ * setting. This is likely not an issue because we are doing single 16-bit ++ * writes for data I/O. ++ */ ++static void ++mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ++{ ++ struct asic3_mmc_host *host = mmc_priv(mmc); ++ u32 clk = 0; ++ ++ DBG("clock %uHz busmode %u powermode %u Vdd %u\n", ++ ios->clock, ios->bus_mode, ios->power_mode, ios->vdd); ++ ++ if (ios->clock) { ++ clk = 0x80; /* slowest by default */ ++ if(ios->clock >= 24000000 / 256) clk >>= 1; ++ if(ios->clock >= 24000000 / 128) clk >>= 1; ++ if(ios->clock >= 24000000 / 64) clk >>= 1; ++ if(ios->clock >= 24000000 / 32) clk >>= 1; ++ if(ios->clock >= 24000000 / 16) clk >>= 1; ++ if(ios->clock >= 24000000 / 8) clk >>= 1; ++ if(ios->clock >= 24000000 / 4) clk >>= 1; ++ if(ios->clock >= 24000000 / 2) clk >>= 1; ++ if(ios->clock >= 24000000 / 1) clk >>= 1; ++ if(clk == 0) { /* For fastest speed we disable the divider. */ ++ ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 0; ++ } else { ++ ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 1; ++ } ++ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; ++ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = ++ host->clock_for_sd ++ | SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK ++ | clk; ++ msleep(10); ++ } else { ++ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; ++ } ++ ++ switch (ios->power_mode) { ++ case MMC_POWER_OFF: ++ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = 0; ++ msleep(1); ++ break; ++ case MMC_POWER_UP: ++ break; ++ case MMC_POWER_ON: ++ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = SD_CONFIG_POWER1_PC_33V; ++ msleep(20); ++ break; ++ } ++} ++ ++static int ++mmc_get_ro(struct mmc_host *mmc) ++{ ++ struct asic3_mmc_host *host = mmc_priv(mmc); ++ ++ /* Call custom handler for RO status */ ++ if(host->hwconfig->mmc_get_ro) { ++ /* Special case for cards w/o WP lock (like miniSD) */ ++ if (host->hwconfig->mmc_get_ro == (void*)-1) { ++ return 0; ++ } else { ++ struct platform_device *pdev = to_platform_device(mmc_dev(mmc)); ++ return host->hwconfig->mmc_get_ro(pdev); ++ } ++ } ++ ++ /* WRITE_PROTECT is active low */ ++ return (ASIC3_MMC_REG(host, SD_CTRL, CardStatus) & SD_CTRL_CARDSTATUS_WRITE_PROTECT)?0:1; ++} ++ ++static struct mmc_host_ops mmc_ops = { ++ .request = mmc_request, ++ .set_ios = mmc_set_ios, ++ .get_ro = mmc_get_ro, ++}; ++ ++static void ++hwinit2_irqsafe(struct asic3_mmc_host *host) ++{ ++ ASIC3_MMC_REG(host, SD_CONFIG, Addr1) = 0x0000; ++ ASIC3_MMC_REG(host, SD_CONFIG, Addr0) = 0x0800; ++ ++ ASIC3_MMC_REG(host, SD_CONFIG, ClkStop) = SD_CONFIG_CLKSTOP_ENABLE_ALL; ++ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_CardDetect) = 2; ++ ASIC3_MMC_REG(host, SD_CONFIG, Command) = SD_CONFIG_COMMAND_MAE; ++ ++ ASIC3_MMC_REG(host, SD_CTRL, SoftwareReset) = 0; /* reset on */ ++ mdelay(2); ++ ++ ASIC3_MMC_REG(host, SD_CTRL, SoftwareReset) = 1; /* reset off */ ++ mdelay(2); ++ ++ ASIC3_MMC_REG(host, SD_CTRL, MemCardOptionSetup) = ++ MEM_CARD_OPTION_REQUIRED ++ | MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(14) ++ | MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT ++ | MEM_CARD_OPTION_DATA_XFR_WIDTH_1 ++ ; ++ host->clock_for_sd = 0; ++ ++ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; ++ ASIC3_MMC_REG(host, SD_CTRL, CardStatus) = 0; ++ ASIC3_MMC_REG(host, SD_CTRL, BufferCtrl) = 0; ++ ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus0) = 0; ++ ASIC3_MMC_REG(host, SD_CTRL, ErrorStatus1) = 0; ++ ASIC3_MMC_REG(host, SD_CTRL, StopInternal) = 0; ++ ++ ASIC3_MMC_REG(host, SDIO_CTRL, ClocknWaitCtrl) = 0x100; ++ /* *((unsigned short *)(((char *)host->ctl_base) + 0x938)) = 0x100; */ ++ ++ ASIC3_MMC_REG(host, SD_CONFIG, ClockMode) = 0; ++ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; ++ ++ mdelay(1); ++ ++ ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( ++ SD_CTRL_INTMASKCARD_RESPONSE_END ++ | SD_CTRL_INTMASKCARD_RW_END ++ | SD_CTRL_INTMASKCARD_CARD_REMOVED_0 ++ | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 ++#if 0 ++ | SD_CTRL_INTMASKCARD_CARD_REMOVED_3 ++ | SD_CTRL_INTMASKCARD_CARD_INSERTED_3 ++#endif ++ ) ++ ; /* check */ ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskBuffer) = 0xffff; /* IRQs off */ ++ ++ /* ++ * ASIC3_MMC_REG(host, SD_CTRL, TransactionCtrl) = SD_CTRL_TRANSACTIONCONTROL_SET; ++ * Wince has 0x1000 ++ */ ++ /* ASIC3_MMC_REG(host, SD_CTRL, TransactionCtrl) = 0x1000; */ ++ ++ ++ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SDPWR, ASIC3_SDHWCTRL_SDPWR); /* turn on power at controller(?) */ ++ ++} ++ ++static void ++hwinit(struct asic3_mmc_host *host, struct platform_device *pdev) ++{ ++ /* Call custom handler for enabling clock (if needed) */ ++ if(host->hwconfig->set_mmc_clock) ++ host->hwconfig->set_mmc_clock(pdev, MMC_CLOCK_ENABLED); ++ ++ /* Not sure if it must be done bit by bit, but leaving as-is */ ++ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_LEVCD, ASIC3_SDHWCTRL_LEVCD); ++ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_LEVWP, ASIC3_SDHWCTRL_LEVWP); ++ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, 0); ++ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_PCLR, 0); ++ ++ asic3_set_clock_cdex (host->asic3_dev, ++ CLOCK_CDEX_EX1 | CLOCK_CDEX_EX0, CLOCK_CDEX_EX1 | CLOCK_CDEX_EX0); ++ msleep(1); ++ ++ asic3_set_clock_sel (host->asic3_dev, ++ CLOCK_SEL_SD_HCLK_SEL | CLOCK_SEL_SD_BCLK_SEL, ++ CLOCK_SEL_SD_HCLK_SEL | 0); /* ? */ ++ ++ asic3_set_clock_cdex (host->asic3_dev, ++ CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS, ++ CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS); ++ msleep(1); ++ ++ asic3_set_extcf_select(host->asic3_dev, ASIC3_EXTCF_SD_MEM_ENABLE, ASIC3_EXTCF_SD_MEM_ENABLE); ++ ++ /* Long Delay */ ++ if( !machine_is_h4700()) ++ msleep(500); ++ ++ hwinit2_irqsafe(host); ++} ++ ++#ifdef CONFIG_PM ++static int ++mmc_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct mmc_host *mmc = platform_get_drvdata(pdev); ++ struct asic3_mmc_host *host = mmc_priv(mmc); ++ int ret; ++ ++ ret = mmc_suspend_host(mmc, state); ++ ++ if (ret) { ++ printk(KERN_ERR DRIVER_NAME ": Could not suspend MMC host, hardware not suspended"); ++ return ret; ++ } ++ ++ /* disable the card insert / remove interrupt while sleeping */ ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( ++ SD_CTRL_INTMASKCARD_RESPONSE_END ++ | SD_CTRL_INTMASKCARD_RW_END); ++ ++ /* disable clock */ ++ ASIC3_MMC_REG(host, SD_CTRL, CardClockCtrl) = 0; ++ ASIC3_MMC_REG(host, SD_CONFIG, ClkStop) = 0; ++ ++ /* power down */ ++ ASIC3_MMC_REG(host, SD_CONFIG, SDHC_Power1) = 0; ++ ++ asic3_set_clock_cdex (host->asic3_dev, ++ CLOCK_CDEX_SD_HOST | CLOCK_CDEX_SD_BUS, 0); ++ ++ /* disable core clock */ ++ if(host->hwconfig->set_mmc_clock) ++ host->hwconfig->set_mmc_clock(pdev, MMC_CLOCK_DISABLED); ++ ++ /* Put in suspend mode */ ++ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, ASIC3_SDHWCTRL_SUSPEND); ++ return 0; ++} ++ ++static int ++mmc_resume(struct platform_device *pdev) ++{ ++ struct mmc_host *mmc = platform_get_drvdata(pdev); ++ struct asic3_mmc_host *host = mmc_priv(mmc); ++ ++ printk(KERN_INFO "%s: starting resume\n", DRIVER_NAME); ++ ++ asic3_set_sdhwctrl(host->asic3_dev, ASIC3_SDHWCTRL_SUSPEND, 0); ++ hwinit(host, pdev); ++ ++ /* re-enable card remove / insert interrupt */ ++ ASIC3_MMC_REG(host, SD_CTRL, IntMaskCard) = ~( ++ SD_CTRL_INTMASKCARD_RESPONSE_END ++ | SD_CTRL_INTMASKCARD_RW_END ++ | SD_CTRL_INTMASKCARD_CARD_REMOVED_0 ++ | SD_CTRL_INTMASKCARD_CARD_INSERTED_0 ); ++ ++ mmc_resume_host(mmc); ++ ++ printk(KERN_INFO "%s: finished resume\n", DRIVER_NAME); ++ return 0; ++} ++#endif ++ ++static int ++mmc_probe(struct platform_device *pdev) ++{ ++ struct mmc_host *mmc; ++ struct asic3_mmc_host *host = NULL; ++ int retval = 0; ++ struct tmio_mmc_hwconfig *mmc_config = (struct tmio_mmc_hwconfig *)pdev->dev.platform_data; ++ ++ /* bus_shift is mandatory */ ++ if (!mmc_config) { ++ printk(KERN_ERR DRIVER_NAME ": Invalid configuration\n"); ++ return -EINVAL; ++ } ++ ++ mmc = mmc_alloc_host(sizeof(struct asic3_mmc_host) + 128, &pdev->dev); ++ if (!mmc) { ++ retval = -ENOMEM; ++ goto exceptional_return; ++ } ++ ++ host = mmc_priv(mmc); ++ host->mmc = mmc; ++ platform_set_drvdata(pdev, mmc); ++ ++ host->ctl_base = 0; ++ host->hwconfig = mmc_config; ++ host->bus_shift = mmc_config->address_shift; ++ host->asic3_dev = pdev->dev.parent; ++ host->clock_for_sd = 0; ++ ++ tasklet_init(&mmc_data_read_tasklet, mmc_data_transfer, (unsigned long)host); ++ ++ host->ctl_base = ioremap_nocache ((unsigned long)pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start); ++ if(!host->ctl_base){ ++ printk(KERN_ERR DRIVER_NAME ": Could not map ASIC3 SD controller\n"); ++ retval = -ENODEV; ++ goto exceptional_return; ++ } ++ ++ printk(DRIVER_NAME ": ASIC3 MMC/SD Driver, controller at 0x%lx\n", (unsigned long)pdev->resource[0].start); ++ ++ mmc->ops = &mmc_ops; ++ mmc->caps = MMC_CAP_4_BIT_DATA; ++ mmc->f_min = 46875; /* ARIC: not sure what these should be */ ++ mmc->f_max = 24000000; /* ARIC: not sure what these should be */ ++ mmc->ocr_avail = MMC_VDD_32_33; ++ ++ hwinit(host, pdev); ++ ++ ++ host->irq = pdev->resource[1].start; ++ ++ retval = request_irq(host->irq, mmc_irq, 0, DRIVER_NAME, host); ++ if(retval) { ++ printk(KERN_ERR DRIVER_NAME ": Unable to get interrupt\n"); ++ retval = -ENODEV; ++ goto exceptional_return; ++ } ++ set_irq_type(host->irq, IRQT_FALLING); ++ ++ mmc_add_host(mmc); ++ ++#ifdef CONFIG_PM ++ // resume_timer.function = resume_timer_callback; ++ // resume_timer.data = 0; ++ // init_timer(&resume_timer); ++#endif ++ ++ return 0; ++ ++exceptional_return: ++ if (mmc) { ++ mmc_free_host(mmc); ++ } ++ if(host && host->ctl_base) iounmap(host->ctl_base); ++ return retval; ++} ++ ++static int ++mmc_remove(struct platform_device *pdev) ++{ ++ struct mmc_host *mmc = platform_get_drvdata(pdev); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ if (mmc) { ++ struct asic3_mmc_host *host = mmc_priv(mmc); ++ mmc_remove_host(mmc); ++ free_irq(host->irq, host); ++ /* FIXME - we might want to consider stopping the chip here... */ ++ iounmap(host->ctl_base); ++ mmc_free_host(mmc); /* FIXME - why does this call hang? */ ++ } ++ return 0; ++} ++ ++/* ------------------- device registration ----------------------- */ ++ ++static struct platform_driver mmc_asic3_driver = { ++ .driver = { ++ .name = DRIVER_NAME, ++ }, ++ .probe = mmc_probe, ++ .remove = mmc_remove, ++#ifdef CONFIG_PM ++ .suspend = mmc_suspend, ++ .resume = mmc_resume, ++#endif ++}; ++ ++static int __init mmc_init(void) ++{ ++ return platform_driver_register(&mmc_asic3_driver); ++} ++ ++static void __exit mmc_exit(void) ++{ ++ platform_driver_unregister(&mmc_asic3_driver); ++} ++ ++late_initcall(mmc_init); ++module_exit(mmc_exit); ++ ++MODULE_DESCRIPTION("HTC ASIC3 SD/MMC driver"); ++MODULE_AUTHOR("Aric Blumer, SDG Systems, LLC"); ++MODULE_LICENSE("GPL"); ++ +Index: linux-2.6.23/drivers/mmc/host/asic3_mmc.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/mmc/host/asic3_mmc.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,25 @@ ++#ifndef __ASIC3_MMC_H ++#define __ASIC3_MMC_H ++ ++#define DRIVER_NAME "asic3_mmc" ++ ++#ifdef CONFIG_MMC_DEBUG ++#define DBG(x...) printk(DRIVER_NAME ": " x) ++#else ++#define DBG(x...) do { } while (0) ++#endif ++ ++/* Response types */ ++#define APP_CMD 0x0040 ++ ++#define SD_CONFIG_CLKSTOP_ENABLE_ALL 0x1f ++ ++#define DONT_CARE_CARD_BITS ( \ ++ SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 \ ++ | SD_CTRL_INTMASKCARD_WRITE_PROTECT \ ++ | SD_CTRL_INTMASKCARD_UNK6 \ ++ | SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 \ ++ ) ++#define DONT_CARE_BUFFER_BITS ( SD_CTRL_INTMASKBUFFER_UNK7 | SD_CTRL_INTMASKBUFFER_CMD_BUSY ) ++ ++#endif // __ASIC3_MMC_H +Index: linux-2.6.23/drivers/input/keyboard/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/input/keyboard/Makefile 2008-01-20 18:59:16.000000000 +0000 ++++ linux-2.6.23/drivers/input/keyboard/Makefile 2008-01-20 21:11:40.000000000 +0000 +@@ -15,6 +15,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newton + obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o + obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o + obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o ++obj-$(CONFIG_KEYBOARD_ASIC3) += asic3_keys.o + obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o + obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o + obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o +Index: linux-2.6.23/drivers/input/keyboard/asic3_keys.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/input/keyboard/asic3_keys.c 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,131 @@ ++/* ++ * Generic buttons driver for ASIC3 SoC. ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file COPYING in the main directory of this archive for ++ * more details. ++ * ++ * Copyright (C) 2003 Joshua Wise ++ * Copyright (C) 2005 Pawel Kolodziejski ++ * Copyright (C) 2006 Paul Sokolovsky ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static irqreturn_t asic3_keys_asic_handle(int irq, void *data) ++{ ++ struct asic3_keys_platform_data *pdata = data; ++ int i, base_irq; ++ ++ base_irq = asic3_irq_base(pdata->asic3_dev); ++ for (i = 0; i < pdata->nbuttons; i++) { ++ struct asic3_keys_button *b = &pdata->buttons[i]; ++ if ((base_irq + b->gpio) == irq) { ++ int state = !!asic3_gpio_get_value(pdata->asic3_dev, b->gpio); ++ ++ if (pdata->buttons[i].type == EV_SW) ++ input_report_switch(pdata->input, pdata->buttons[i].keycode, state ^ b->active_low); ++ else ++ input_report_key(pdata->input, b->keycode, state ^ b->active_low); ++ input_sync(pdata->input); ++ } ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static int __devinit asic3_keys_probe(struct platform_device *pdev) ++{ ++ struct asic3_keys_platform_data *pdata = pdev->dev.platform_data; ++ int i, base_irq; ++ int j, ret; ++ ++ pdata->input = input_allocate_device(); ++ ++ base_irq = asic3_irq_base(pdata->asic3_dev); ++ ++ for (i = 0; i < pdata->nbuttons; i++) { ++ struct asic3_keys_button *b = &pdata->buttons[i]; ++ set_bit(b->keycode, pdata->input->keybit); ++ ret=request_irq(base_irq + b->gpio, asic3_keys_asic_handle, SA_SAMPLE_RANDOM, b->desc, pdata); ++ if (ret) ++ { ++ printk(KERN_NOTICE "Failed to allocate asic3_keys irq=%d.\n",b->gpio); ++ ++ for(j=0; jbuttons[i].gpio, NULL); ++ ++ input_unregister_device (pdata->input); ++ ++ return -ENODEV; ++ } ++ ++ set_irq_type(base_irq + b->gpio, IRQT_BOTHEDGE); ++ if (pdata->buttons[i].type == EV_SW) { ++ pdata->input->evbit[0] |= BIT(EV_SW); ++ set_bit(b->keycode, pdata->input->swbit); ++ } else { ++ pdata->input->evbit[0] |= BIT(EV_KEY); ++ set_bit(b->keycode, pdata->input->keybit); ++ } ++ } ++ ++ pdata->input->name = pdev->name; ++ input_register_device(pdata->input); ++ ++ return 0; ++} ++ ++static int __devexit asic3_keys_remove(struct platform_device *pdev) ++{ ++ struct asic3_keys_platform_data *pdata = pdev->dev.platform_data; ++ int i, base_irq; ++ ++ base_irq = asic3_irq_base(pdata->asic3_dev); ++ for (i = 0; i < pdata->nbuttons; i++) { ++ free_irq(base_irq + pdata->buttons[i].gpio, NULL); ++ } ++ ++ input_unregister_device(pdata->input); ++ ++ return 0; ++} ++ ++ ++static struct platform_driver asic3_keys_driver = { ++ .probe = asic3_keys_probe, ++ .remove = __devexit_p(asic3_keys_remove), ++ .driver = { ++ .name = "asic3-keys", ++ }, ++}; ++ ++static int __init asic3_keys_init(void) ++{ ++ return platform_driver_register(&asic3_keys_driver); ++} ++ ++static void __exit asic3_keys_exit(void) ++{ ++ platform_driver_unregister(&asic3_keys_driver); ++} ++ ++module_init(asic3_keys_init); ++module_exit(asic3_keys_exit); ++ ++MODULE_AUTHOR("Joshua Wise, Pawel Kolodziejski, Paul Sokolovsky"); ++MODULE_DESCRIPTION("Buttons driver for HTC ASIC3 SoC"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/include/asm-arm/arch-pxa/irqs.h +=================================================================== +--- linux-2.6.23.orig/include/asm-arm/arch-pxa/irqs.h 2008-01-20 18:59:28.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/irqs.h 2008-01-20 18:59:46.000000000 +0000 +@@ -182,6 +182,8 @@ + defined(CONFIG_MACH_LOGICPD_PXA270) || \ + defined(CONFIG_MACH_MAINSTONE) + #define NR_IRQS (IRQ_BOARD_END) ++#elif defined(CONFIG_MACH_HTCUNIVERSAL) ++#define NR_IRQS (IRQ_BOARD_START + 96) + #else + #define NR_IRQS (IRQ_BOARD_START) + #endif +Index: linux-2.6.23/include/linux/ioport.h +=================================================================== +--- linux-2.6.23.orig/include/linux/ioport.h 2008-01-20 18:59:31.000000000 +0000 ++++ linux-2.6.23/include/linux/ioport.h 2008-01-20 18:59:46.000000000 +0000 +@@ -56,6 +56,7 @@ struct resource_list { + #define IORESOURCE_IRQ_HIGHLEVEL (1<<2) + #define IORESOURCE_IRQ_LOWLEVEL (1<<3) + #define IORESOURCE_IRQ_SHAREABLE (1<<4) ++#define IORESOURCE_IRQ_SOC_SUBDEVICE (1<<5) + + /* ISA PnP DMA specific bits (IORESOURCE_BITS) */ + #define IORESOURCE_DMA_TYPE_MASK (3<<0) +Index: linux-2.6.23/include/asm-arm/arch-pxa/serial.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/serial.h 2008-01-20 18:59:46.000000000 +0000 +@@ -0,0 +1,78 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/serial.h ++ * ++ * Author: Nicolas Pitre ++ * Copyright: (C) 2001 MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++ ++#define BAUD_BASE 921600 ++ ++/* Standard COM flags */ ++#define STD_COM_FLAGS (ASYNC_SKIP_TEST) ++ ++#define STD_SERIAL_PORT_DEFNS \ ++ { \ ++ type: PORT_PXA, \ ++ xmit_fifo_size: 64, \ ++ baud_base: BAUD_BASE, \ ++ iomem_base: &FFUART, \ ++ iomem_reg_shift: 2, \ ++ io_type: SERIAL_IO_MEM, \ ++ irq: IRQ_FFUART, \ ++ flags: STD_COM_FLAGS, \ ++ }, { \ ++ type: PORT_PXA, \ ++ xmit_fifo_size: 64, \ ++ baud_base: BAUD_BASE, \ ++ iomem_base: &STUART, \ ++ iomem_reg_shift: 2, \ ++ io_type: SERIAL_IO_MEM, \ ++ irq: IRQ_STUART, \ ++ flags: STD_COM_FLAGS, \ ++ }, { \ ++ type: PORT_PXA, \ ++ xmit_fifo_size: 64, \ ++ baud_base: BAUD_BASE, \ ++ iomem_base: &BTUART, \ ++ iomem_reg_shift: 2, \ ++ io_type: SERIAL_IO_MEM, \ ++ irq: IRQ_BTUART, \ ++ flags: STD_COM_FLAGS, \ ++ } ++ ++#define EXTRA_SERIAL_PORT_DEFNS ++ ++struct platform_pxa_serial_funcs { ++ ++ /* Initialize whatever is connected to this serial port. */ ++ void (*configure)(int state); ++#define PXA_UART_CFG_PRE_STARTUP 0 ++#define PXA_UART_CFG_POST_STARTUP 1 ++#define PXA_UART_CFG_PRE_SHUTDOWN 2 ++#define PXA_UART_CFG_POST_SHUTDOWN 3 ++ ++ /* Enable or disable the individual transmitter/receiver submodules. ++ * On transceivers without echo cancellation (e.g. SIR) ++ * transmitter always has priority; e.g. if both bits are set, ++ * only the transmitter is enabled. */ ++ void (*set_txrx)(int txrx); ++#define PXA_SERIAL_TX 1 ++#define PXA_SERIAL_RX 2 ++ ++ /* Get the current state of tx/rx. */ ++ int (*get_txrx)(void); ++ ++ int (*suspend)(struct platform_device *dev, pm_message_t state); ++ int (*resume)(struct platform_device *dev); ++}; ++ ++void pxa_set_ffuart_info(struct platform_pxa_serial_funcs *ffuart_funcs); ++void pxa_set_btuart_info(struct platform_pxa_serial_funcs *btuart_funcs); ++void pxa_set_stuart_info(struct platform_pxa_serial_funcs *stuart_funcs); ++void pxa_set_hwuart_info(struct platform_pxa_serial_funcs *hwuart_funcs); +Index: linux-2.6.23/drivers/serial/pxa.c +=================================================================== +--- linux-2.6.23.orig/drivers/serial/pxa.c 2008-01-20 18:59:23.000000000 +0000 ++++ linux-2.6.23/drivers/serial/pxa.c 2008-01-20 18:59:46.000000000 +0000 +@@ -47,6 +47,7 @@ + #include + #include + #include ++#include + #include + + +@@ -60,6 +61,14 @@ struct uart_pxa_port { + char *name; + }; + ++ ++#define IS_METHOD(dev, method) (dev && (dev)->platform_data && ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method) ++#define METHOD_CALL(dev, method) \ ++ ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method() ++#define SAFE_METHOD_CALL(dev, method, args...) \ ++ if (IS_METHOD(dev, method)) \ ++ ((struct platform_pxa_serial_funcs *)(dev)->platform_data)->method(args) ++ + static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) + { + offset <<= 2; +@@ -347,6 +356,9 @@ static int serial_pxa_startup(struct uar + unsigned long flags; + int retval; + ++ /* Perform platform-specific port initialization, if needed. */ ++ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_PRE_STARTUP); ++ + if (port->line == 3) /* HWUART */ + up->mcr |= UART_MCR_AFE; + else +@@ -404,6 +416,12 @@ static int serial_pxa_startup(struct uar + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + ++ /* ++ * Perform platform-specific port initialization if needed ++ */ ++ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_POST_STARTUP); ++ SAFE_METHOD_CALL(port->dev, set_txrx, PXA_SERIAL_RX); ++ + return 0; + } + +@@ -412,6 +430,8 @@ static void serial_pxa_shutdown(struct u + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + ++ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_PRE_SHUTDOWN); ++ + free_irq(up->port.irq, up); + + /* +@@ -433,6 +453,8 @@ static void serial_pxa_shutdown(struct u + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); ++ ++ SAFE_METHOD_CALL(port->dev, configure, PXA_UART_CFG_POST_SHUTDOWN); + } + + static void +Index: linux-2.6.23/arch/arm/mach-pxa/generic.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/generic.c 2008-01-20 18:59:09.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/generic.c 2008-01-20 18:59:46.000000000 +0000 +@@ -38,6 +38,7 @@ + #include + #include + #include ++#include + + #include "devices.h" + #include "generic.h" +@@ -412,6 +413,18 @@ struct platform_device pxa_device_hwuart + .num_resources = ARRAY_SIZE(pxa_resource_hwuart), + }; + ++void __init pxa_set_ffuart_info(struct platform_pxa_serial_funcs *info) ++{ ++ pxa_device_ffuart.dev.platform_data = info; ++} ++EXPORT_SYMBOL(pxa_set_ffuart_info); ++ ++void __init pxa_set_btuart_info(struct platform_pxa_serial_funcs *info) ++{ ++ pxa_device_btuart.dev.platform_data = info; ++} ++EXPORT_SYMBOL(pxa_set_btuart_info); ++ + static struct resource pxai2c_resources[] = { + { + .start = 0x40301680, +Index: linux-2.6.23/drivers/leds/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/leds/Makefile 2008-01-20 18:59:17.000000000 +0000 ++++ linux-2.6.23/drivers/leds/Makefile 2008-01-20 21:10:45.000000000 +0000 +@@ -15,6 +15,7 @@ obj-$(CONFIG_LEDS_AMS_DELTA) += leds-am + obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o + obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o + obj-$(CONFIG_LEDS_H1940) += leds-h1940.o ++obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o + obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o + obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o + obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o +Index: linux-2.6.23/drivers/input/keyboard/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/input/keyboard/Kconfig 2008-01-20 18:59:16.000000000 +0000 ++++ linux-2.6.23/drivers/input/keyboard/Kconfig 2008-01-20 18:59:46.000000000 +0000 +@@ -293,4 +293,11 @@ config KEYBOARD_BFIN + To compile this driver as a module, choose M here: the + module will be called bf54x-keys. + ++config KEYBOARD_ASIC3 ++ tristate "Buttons on ASIC3 SoC GPIOs (iPaqs, etc.)" ++ depends on HTC_ASIC3 ++ help ++ This enables support for the buttons attached to GPIOs of ++ HTC ASIC3 peripheral controller. ++ + endif diff --git a/meta/packages/linux/linux-rp-2.6.24/pxa-serial-hack.patch b/meta/packages/linux/linux-rp-2.6.24/pxa-serial-hack.patch new file mode 100644 index 0000000000..bf20f46a05 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/pxa-serial-hack.patch @@ -0,0 +1,90 @@ +--- + drivers/serial/8250.c | 5 +++++ + drivers/serial/serial_core.c | 1 + + drivers/serial/serial_cs.c | 12 +++++++++--- + include/linux/serial_core.h | 1 + + 4 files changed, 16 insertions(+), 3 deletions(-) + +Index: linux-2.6.20/drivers/serial/8250.c +=================================================================== +--- linux-2.6.20.orig/drivers/serial/8250.c 2007-04-27 13:37:26.000000000 +0100 ++++ linux-2.6.20/drivers/serial/8250.c 2007-04-27 13:38:16.000000000 +0100 +@@ -2429,7 +2429,12 @@ + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, ++#ifdef CONFIG_SERIAL_PXA ++ .minor = 64 + 4, ++ .name_base = 4, ++#else + .minor = 64, ++#endif + .nr = UART_NR, + .cons = SERIAL8250_CONSOLE, + }; +Index: linux-2.6.20/drivers/serial/serial_core.c +=================================================================== +--- linux-2.6.20.orig/drivers/serial/serial_core.c 2007-02-04 18:44:54.000000000 +0000 ++++ linux-2.6.20/drivers/serial/serial_core.c 2007-04-27 13:39:39.000000000 +0100 +@@ -2068,7 +2068,8 @@ + printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n", + port->dev ? port->dev->bus_id : "", + port->dev ? ": " : "", +- drv->dev_name, port->line, address, port->irq, uart_type(port)); ++ drv->dev_name, port->line + drv->name_base, address, port->irq, ++ uart_type(port)); + } + + static void +@@ -2183,6 +2184,7 @@ + normal->owner = drv->owner; + normal->driver_name = drv->driver_name; + normal->name = drv->dev_name; ++ normal->name_base = drv->name_base; + normal->major = drv->major; + normal->minor_start = drv->minor; + normal->type = TTY_DRIVER_TYPE_SERIAL; +Index: linux-2.6.20/include/linux/serial_core.h +=================================================================== +--- linux-2.6.20.orig/include/linux/serial_core.h 2007-02-04 18:44:54.000000000 +0000 ++++ linux-2.6.20/include/linux/serial_core.h 2007-04-27 13:37:27.000000000 +0100 +@@ -341,6 +341,7 @@ + struct module *owner; + const char *driver_name; + const char *dev_name; ++ int name_base; + int major; + int minor; + int nr; +Index: linux-2.6.20/drivers/serial/serial_cs.c +=================================================================== +--- linux-2.6.20.orig/drivers/serial/serial_cs.c 2007-02-04 18:44:54.000000000 +0000 ++++ linux-2.6.20/drivers/serial/serial_cs.c 2007-04-27 13:40:34.000000000 +0100 +@@ -390,7 +390,7 @@ + kio_addr_t iobase, int irq) + { + struct uart_port port; +- int line; ++ int line, linestart; + + memset(&port, 0, sizeof (struct uart_port)); + port.iobase = iobase; +@@ -411,10 +411,16 @@ + return -EINVAL; + } + ++#if CONFIG_SERIAL_PXA ++ linestart = 4; ++#else ++ linestart = 0; ++#endif ++ + info->line[info->ndev] = line; +- sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); ++ sprintf(info->node[info->ndev].dev_name, "ttyS%d", line+linestart); + info->node[info->ndev].major = TTY_MAJOR; +- info->node[info->ndev].minor = 0x40 + line; ++ info->node[info->ndev].minor = 0x40 + line + linestart; + if (info->ndev > 0) + info->node[info->ndev - 1].next = &info->node[info->ndev]; + info->ndev++; diff --git a/meta/packages/linux/linux-rp-2.6.24/pxa_fb_overlay.patch b/meta/packages/linux/linux-rp-2.6.24/pxa_fb_overlay.patch new file mode 100644 index 0000000000..49c59b3275 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/pxa_fb_overlay.patch @@ -0,0 +1,26 @@ +--- + drivers/video/pxafb.h | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +Index: linux-2.6.22/drivers/video/pxafb.h +=================================================================== +--- linux-2.6.22.orig/drivers/video/pxafb.h 2007-09-25 15:44:42.000000000 +0200 ++++ linux-2.6.22/drivers/video/pxafb.h 2007-09-25 15:45:07.000000000 +0200 +@@ -36,7 +36,7 @@ + struct fb_bitfield transp; + }; + +-#ifdef CONFIG_PXA27x ++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) + /* PXA Overlay Framebuffer Support */ + struct overlayfb_info + { +@@ -142,7 +142,7 @@ + wait_queue_head_t ctrlr_wait; + struct work_struct task; + +-#ifdef CONFIG_PXA27x ++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) + /* PXA Overlay Framebuffer Support */ + struct overlayfb_info *overlay1fb; + struct overlayfb_info *overlay2fb; diff --git a/meta/packages/linux/linux-rp-2.6.24/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch b/meta/packages/linux/linux-rp-2.6.24/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch new file mode 100644 index 0000000000..b513ba1466 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch @@ -0,0 +1,155 @@ + +From: Petr Vandrovec + +Patch below adds support for using different prescaler than 16 for 16c950 +chips. This is needed for using Fujitsu-Siemens Connect2Air compact-flash +card, which comes (apparently) with 806kHz clocks, and so you have to +program prescaler for division by 7, and DLAB to 1, to get 115200Bd. + +To get card properly running you also have to add lines below to +/etc/pcmcia/serial.opts so kernel knows that base speed is not 115200 but +50400 (50400 * 16 = 806400; 806400 / 7 = 115200). As I've found no code +specifying baud_rate in serial_cs, I assume that specifying it in +serial.opts is right way to do this type of things. + +Patch also fixes problem that for UPF_MAGIC_MULTIPLIER maximum possible +baud rate passed to uart code was uartclk / 16 while correct value for +these devices (and for 16c950) is uartclk / 4. + +Patch also fixes problem that for UPF_MAGIC_MULTIPLIER devices with +baud_rate 19200 or 9600 spd_cust did not work correctly. Not that such +devices exist, but we should not ignore spd_cust, user probably knows why +he asked for spd_cust. + +serial.opts: + +case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in +'0279,950b-2-GPRS Modem---') + SERIAL_OPTS="baud_base 50400" + ;; +esac + +Cc: David Woodhouse +Signed-off-by: Andrew Morton +--- + + drivers/serial/8250.c | 82 +++++++++++++++++++++++++++++++++++++++----------- + 1 file changed, 64 insertions(+), 18 deletions(-) + +Index: linux-2.6.21/drivers/serial/8250.c +=================================================================== +--- linux-2.6.21.orig/drivers/serial/8250.c 2007-07-01 16:59:52.000000000 +0100 ++++ linux-2.6.21/drivers/serial/8250.c 2007-07-01 17:01:21.000000000 +0100 +@@ -1964,24 +1964,58 @@ static void serial8250_shutdown(struct u + serial_unlink_irq_chain(up); + } + +-static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) ++static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud, ++ unsigned int *prescaler) + { +- unsigned int quot; +- +- /* +- * Handle magic divisors for baud rates above baud_base on +- * SMSC SuperIO chips. ++ /* ++ * Use special handling only if user did not supply its own divider. ++ * spd_cust is defined in terms of baud_base, so always use default ++ * prescaler when spd_cust is requested. + */ +- if ((port->flags & UPF_MAGIC_MULTIPLIER) && +- baud == (port->uartclk/4)) +- quot = 0x8001; +- else if ((port->flags & UPF_MAGIC_MULTIPLIER) && +- baud == (port->uartclk/8)) +- quot = 0x8002; +- else +- quot = uart_get_divisor(port, baud); + +- return quot; ++ *prescaler = 16; ++ if (baud != 38400 || (port->flags & UPF_SPD_MASK) != UPF_SPD_CUST) { ++ unsigned int quot = port->uartclk / baud; ++ ++ /* ++ * Handle magic divisors for baud rates above baud_base on ++ * SMSC SuperIO chips. ++ */ ++ if (port->flags & UPF_MAGIC_MULTIPLIER) { ++ if (quot == 4) { ++ return 0x8001; ++ } else if (quot == 8) { ++ return 0x8002; ++ } ++ } ++ if (port->type == PORT_16C950) { ++ /* ++ * This computes TCR value (4 to 16), not CPR value (which can ++ * be between 1.000 and 31.875) - chip I have uses XTAL of ++ * 806400Hz, and so a division by 7 is required to get 115200Bd. ++ * I'm leaving CPR disabled for now, until someone will ++ * hit even more exotic XTAL (it is needed to get 500kbps ++ * or 1000kbps from 18.432MHz XTAL, but I have no device ++ * which would benefit from doing that). ++ * ++ * If we can use divide by 16, use it. Otherwise look for ++ * better prescaler, from 15 to 4. If quotient cannot ++ * be divided by any integer value between 4 and 15, use 4. ++ */ ++ if (quot & 0x0F) { ++ unsigned int div; ++ ++ for (div = 15; div > 4; div--) { ++ if (quot % div == 0) { ++ break; ++ } ++ } ++ *prescaler = div; ++ return quot / div; ++ } ++ } ++ } ++ return uart_get_divisor(port, baud); + } + + static void +@@ -1991,7 +2025,7 @@ serial8250_set_termios(struct uart_port + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned char cval, fcr = 0; + unsigned long flags; +- unsigned int baud, quot; ++ unsigned int baud, quot, prescaler; + + switch (termios->c_cflag & CSIZE) { + case CS5: +@@ -2023,8 +2057,13 @@ serial8250_set_termios(struct uart_port + /* + * Ask the core to calculate the divisor for us. + */ +- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); +- quot = serial8250_get_divisor(port, baud); ++ if (port->type == PORT_16C950 || (port->flags & UPF_MAGIC_MULTIPLIER)) { ++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); ++ } else { ++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); ++ } ++ quot = serial8250_get_divisor(port, baud, &prescaler); ++ + + /* + * Oxford Semi 952 rev B workaround +@@ -2139,6 +2178,13 @@ serial8250_set_termios(struct uart_port + serial_dl_write(up, quot); + + /* ++ * Program prescaler for 16C950 chips. ++ */ ++ if (up->port.type == PORT_16C950) { ++ serial_icr_write(up, UART_TCR, prescaler == 16 ? 0 : prescaler); ++ } ++ ++ /* + * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR + * is written without DLAB set, this mode will be disabled. + */ diff --git a/meta/packages/linux/linux-rp-2.6.24/squashfs3.3.patch b/meta/packages/linux/linux-rp-2.6.24/squashfs3.3.patch new file mode 100644 index 0000000000..cb9a5c49e4 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/squashfs3.3.patch @@ -0,0 +1,4234 @@ +diff -x .gitignore -Nurp linux-2.6.24/fs/Kconfig linux-2.6.24-squashfs3.3/fs/Kconfig +--- linux-2.6.24/fs/Kconfig 2007-10-25 17:41:45.000000000 +0100 ++++ linux-2.6.24-squashfs3.3/fs/Kconfig 2007-11-01 05:06:25.000000000 +0000 +@@ -1396,6 +1396,56 @@ config CRAMFS + + If unsure, say N. + ++config SQUASHFS ++ tristate "SquashFS 3.3 - Squashed file system support" ++ select ZLIB_INFLATE ++ help ++ Saying Y here includes support for SquashFS 3.3 (a Compressed ++ Read-Only File System). Squashfs is a highly compressed read-only ++ filesystem for Linux. It uses zlib compression to compress both ++ files, inodes and directories. Inodes in the system are very small ++ and all blocks are packed to minimise data overhead. Block sizes ++ greater than 4K are supported up to a maximum of 1 Mbytes (default ++ block size 128K). SquashFS 3.3 supports 64 bit filesystems and files ++ (larger than 4GB), full uid/gid information, hard links and timestamps. ++ ++ Squashfs is intended for general read-only filesystem use, for ++ archival use (i.e. in cases where a .tar.gz file may be used), and in ++ embedded systems where low overhead is needed. Further information ++ and filesystem tools are available from http://squashfs.sourceforge.net. ++ ++ If you want to compile this as a module ( = code which can be ++ inserted in and removed from the running kernel whenever you want), ++ say M here and read . The module ++ will be called squashfs. Note that the root file system (the one ++ containing the directory /) cannot be compiled as a module. ++ ++ If unsure, say N. ++ ++config SQUASHFS_EMBEDDED ++ ++ bool "Additional option for memory-constrained systems" ++ depends on SQUASHFS ++ default n ++ help ++ Saying Y here allows you to specify cache size. ++ ++ If unsure, say N. ++ ++config SQUASHFS_FRAGMENT_CACHE_SIZE ++ int "Number of fragments cached" if SQUASHFS_EMBEDDED ++ depends on SQUASHFS ++ default "3" ++ help ++ By default SquashFS caches the last 3 fragments read from ++ the filesystem. Increasing this amount may mean SquashFS ++ has to re-read fragments less often from disk, at the expense ++ of extra system memory. Decreasing this amount will mean ++ SquashFS uses less memory at the expense of extra reads from disk. ++ ++ Note there must be at least one cached fragment. Anything ++ much more than three will probably not make much difference. ++ + config VXFS_FS + tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" + depends on BLOCK +diff -x .gitignore -Nurp linux-2.6.24/fs/Makefile linux-2.6.24-squashfs3.3/fs/Makefile +--- linux-2.6.24/fs/Makefile 2007-10-25 17:41:45.000000000 +0100 ++++ linux-2.6.24-squashfs3.3/fs/Makefile 2007-11-01 05:08:09.000000000 +0000 +@@ -72,6 +72,7 @@ obj-$(CONFIG_JBD) += jbd/ + obj-$(CONFIG_JBD2) += jbd2/ + obj-$(CONFIG_EXT2_FS) += ext2/ + obj-$(CONFIG_CRAMFS) += cramfs/ ++obj-$(CONFIG_SQUASHFS) += squashfs/ + obj-y += ramfs/ + obj-$(CONFIG_HUGETLBFS) += hugetlbfs/ + obj-$(CONFIG_CODA_FS) += coda/ +diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/inode.c linux-2.6.24-squashfs3.3/fs/squashfs/inode.c +--- linux-2.6.24/fs/squashfs/inode.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.24-squashfs3.3/fs/squashfs/inode.c 2007-11-01 05:05:00.000000000 +0000 +@@ -0,0 +1,2192 @@ ++/* ++ * Squashfs - a compressed read only filesystem for Linux ++ * ++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 ++ * Phillip Lougher ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2, ++ * or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * inode.c ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "squashfs.h" ++ ++int squashfs_cached_blks; ++ ++static void vfs_read_inode(struct inode *i); ++static struct dentry *squashfs_get_parent(struct dentry *child); ++static int squashfs_read_inode(struct inode *i, squashfs_inode_t inode); ++static int squashfs_statfs(struct dentry *, struct kstatfs *); ++static int squashfs_symlink_readpage(struct file *file, struct page *page); ++static long long read_blocklist(struct inode *inode, int index, ++ int readahead_blks, char *block_list, ++ unsigned short **block_p, unsigned int *bsize); ++static int squashfs_readpage(struct file *file, struct page *page); ++static int squashfs_readdir(struct file *, void *, filldir_t); ++static struct dentry *squashfs_lookup(struct inode *, struct dentry *, ++ struct nameidata *); ++static int squashfs_remount(struct super_block *s, int *flags, char *data); ++static void squashfs_put_super(struct super_block *); ++static int squashfs_get_sb(struct file_system_type *,int, const char *, void *, ++ struct vfsmount *); ++static struct inode *squashfs_alloc_inode(struct super_block *sb); ++static void squashfs_destroy_inode(struct inode *inode); ++static int init_inodecache(void); ++static void destroy_inodecache(void); ++ ++static struct file_system_type squashfs_fs_type = { ++ .owner = THIS_MODULE, ++ .name = "squashfs", ++ .get_sb = squashfs_get_sb, ++ .kill_sb = kill_block_super, ++ .fs_flags = FS_REQUIRES_DEV ++}; ++ ++static const unsigned char squashfs_filetype_table[] = { ++ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK ++}; ++ ++static struct super_operations squashfs_super_ops = { ++ .alloc_inode = squashfs_alloc_inode, ++ .destroy_inode = squashfs_destroy_inode, ++ .statfs = squashfs_statfs, ++ .put_super = squashfs_put_super, ++ .remount_fs = squashfs_remount ++}; ++ ++static struct super_operations squashfs_export_super_ops = { ++ .alloc_inode = squashfs_alloc_inode, ++ .destroy_inode = squashfs_destroy_inode, ++ .statfs = squashfs_statfs, ++ .put_super = squashfs_put_super, ++ .read_inode = vfs_read_inode ++}; ++ ++static struct export_operations squashfs_export_ops = { ++ .get_parent = squashfs_get_parent ++}; ++ ++SQSH_EXTERN const struct address_space_operations squashfs_symlink_aops = { ++ .readpage = squashfs_symlink_readpage ++}; ++ ++SQSH_EXTERN const struct address_space_operations squashfs_aops = { ++ .readpage = squashfs_readpage ++}; ++ ++static const struct file_operations squashfs_dir_ops = { ++ .read = generic_read_dir, ++ .readdir = squashfs_readdir ++}; ++ ++SQSH_EXTERN struct inode_operations squashfs_dir_inode_ops = { ++ .lookup = squashfs_lookup ++}; ++ ++ ++static struct buffer_head *get_block_length(struct super_block *s, ++ int *cur_index, int *offset, int *c_byte) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ unsigned short temp; ++ struct buffer_head *bh; ++ ++ if (!(bh = sb_bread(s, *cur_index))) ++ goto out; ++ ++ if (msblk->devblksize - *offset == 1) { ++ if (msblk->swap) ++ ((unsigned char *) &temp)[1] = *((unsigned char *) ++ (bh->b_data + *offset)); ++ else ++ ((unsigned char *) &temp)[0] = *((unsigned char *) ++ (bh->b_data + *offset)); ++ brelse(bh); ++ if (!(bh = sb_bread(s, ++(*cur_index)))) ++ goto out; ++ if (msblk->swap) ++ ((unsigned char *) &temp)[0] = *((unsigned char *) ++ bh->b_data); ++ else ++ ((unsigned char *) &temp)[1] = *((unsigned char *) ++ bh->b_data); ++ *c_byte = temp; ++ *offset = 1; ++ } else { ++ if (msblk->swap) { ++ ((unsigned char *) &temp)[1] = *((unsigned char *) ++ (bh->b_data + *offset)); ++ ((unsigned char *) &temp)[0] = *((unsigned char *) ++ (bh->b_data + *offset + 1)); ++ } else { ++ ((unsigned char *) &temp)[0] = *((unsigned char *) ++ (bh->b_data + *offset)); ++ ((unsigned char *) &temp)[1] = *((unsigned char *) ++ (bh->b_data + *offset + 1)); ++ } ++ *c_byte = temp; ++ *offset += 2; ++ } ++ ++ if (SQUASHFS_CHECK_DATA(msblk->sblk.flags)) { ++ if (*offset == msblk->devblksize) { ++ brelse(bh); ++ if (!(bh = sb_bread(s, ++(*cur_index)))) ++ goto out; ++ *offset = 0; ++ } ++ if (*((unsigned char *) (bh->b_data + *offset)) != ++ SQUASHFS_MARKER_BYTE) { ++ ERROR("Metadata block marker corrupt @ %x\n", ++ *cur_index); ++ brelse(bh); ++ goto out; ++ } ++ (*offset)++; ++ } ++ return bh; ++ ++out: ++ return NULL; ++} ++ ++ ++SQSH_EXTERN unsigned int squashfs_read_data(struct super_block *s, char *buffer, ++ long long index, unsigned int length, ++ long long *next_index, int srclength) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ struct buffer_head **bh; ++ unsigned int offset = index & ((1 << msblk->devblksize_log2) - 1); ++ unsigned int cur_index = index >> msblk->devblksize_log2; ++ int bytes, avail_bytes, b = 0, k = 0; ++ unsigned int compressed; ++ unsigned int c_byte = length; ++ ++ bh = kmalloc(((sblk->block_size >> msblk->devblksize_log2) + 1) * ++ sizeof(struct buffer_head *), GFP_KERNEL); ++ if (bh == NULL) ++ goto read_failure; ++ ++ if (c_byte) { ++ bytes = msblk->devblksize - offset; ++ compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte); ++ c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte); ++ ++ TRACE("Block @ 0x%llx, %scompressed size %d, src size %d\n", index, ++ compressed ? "" : "un", (unsigned int) c_byte, srclength); ++ ++ if (c_byte > srclength || index < 0 || (index + c_byte) > sblk->bytes_used) ++ goto read_failure; ++ ++ bh[0] = sb_getblk(s, cur_index); ++ if (bh[0] == NULL) ++ goto block_release; ++ ++ for (b = 1; bytes < c_byte; b++) { ++ bh[b] = sb_getblk(s, ++cur_index); ++ if (bh[b] == NULL) ++ goto block_release; ++ bytes += msblk->devblksize; ++ } ++ ll_rw_block(READ, b, bh); ++ } else { ++ if (index < 0 || (index + 2) > sblk->bytes_used) ++ goto read_failure; ++ ++ bh[0] = get_block_length(s, &cur_index, &offset, &c_byte); ++ if (bh[0] == NULL) ++ goto read_failure; ++ ++ bytes = msblk->devblksize - offset; ++ compressed = SQUASHFS_COMPRESSED(c_byte); ++ c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte); ++ ++ TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed ++ ? "" : "un", (unsigned int) c_byte); ++ ++ if (c_byte > srclength || (index + c_byte) > sblk->bytes_used) ++ goto read_failure; ++ ++ for (b = 1; bytes < c_byte; b++) { ++ bh[b] = sb_getblk(s, ++cur_index); ++ if (bh[b] == NULL) ++ goto block_release; ++ bytes += msblk->devblksize; ++ } ++ ll_rw_block(READ, b - 1, bh + 1); ++ } ++ ++ if (compressed) { ++ int zlib_err = 0; ++ ++ /* ++ * uncompress block ++ */ ++ ++ mutex_lock(&msblk->read_data_mutex); ++ ++ msblk->stream.next_out = buffer; ++ msblk->stream.avail_out = srclength; ++ ++ for (bytes = 0; k < b; k++) { ++ avail_bytes = min(c_byte - bytes, msblk->devblksize - offset); ++ ++ wait_on_buffer(bh[k]); ++ if (!buffer_uptodate(bh[k])) ++ goto release_mutex; ++ ++ msblk->stream.next_in = bh[k]->b_data + offset; ++ msblk->stream.avail_in = avail_bytes; ++ ++ if (k == 0) { ++ zlib_err = zlib_inflateInit(&msblk->stream); ++ if (zlib_err != Z_OK) { ++ ERROR("zlib_inflateInit returned unexpected result 0x%x," ++ " srclength %d\n", zlib_err, srclength); ++ goto release_mutex; ++ } ++ ++ if (avail_bytes == 0) { ++ offset = 0; ++ brelse(bh[k]); ++ continue; ++ } ++ } ++ ++ zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH); ++ if (zlib_err != Z_OK && zlib_err != Z_STREAM_END) { ++ ERROR("zlib_inflate returned unexpected result 0x%x," ++ " srclength %d, avail_in %d, avail_out %d\n", zlib_err, ++ srclength, msblk->stream.avail_in, msblk->stream.avail_out); ++ goto release_mutex; ++ } ++ ++ bytes += avail_bytes; ++ offset = 0; ++ brelse(bh[k]); ++ } ++ ++ if (zlib_err != Z_STREAM_END) ++ goto release_mutex; ++ ++ zlib_err = zlib_inflateEnd(&msblk->stream); ++ if (zlib_err != Z_OK) { ++ ERROR("zlib_inflateEnd returned unexpected result 0x%x," ++ " srclength %d\n", zlib_err, srclength); ++ goto release_mutex; ++ } ++ bytes = msblk->stream.total_out; ++ mutex_unlock(&msblk->read_data_mutex); ++ } else { ++ int i; ++ ++ for(i = 0; i < b; i++) { ++ wait_on_buffer(bh[i]); ++ if (!buffer_uptodate(bh[i])) ++ goto block_release; ++ } ++ ++ for (bytes = 0; k < b; k++) { ++ avail_bytes = min(c_byte - bytes, msblk->devblksize - offset); ++ ++ memcpy(buffer + bytes, bh[k]->b_data + offset, avail_bytes); ++ bytes += avail_bytes; ++ offset = 0; ++ brelse(bh[k]); ++ } ++ } ++ ++ if (next_index) ++ *next_index = index + c_byte + (length ? 0 : ++ (SQUASHFS_CHECK_DATA(msblk->sblk.flags) ? 3 : 2)); ++ ++ kfree(bh); ++ return bytes; ++ ++release_mutex: ++ mutex_unlock(&msblk->read_data_mutex); ++ ++block_release: ++ for (; k < b; k++) ++ brelse(bh[k]); ++ ++read_failure: ++ ERROR("sb_bread failed reading block 0x%x\n", cur_index); ++ kfree(bh); ++ return 0; ++} ++ ++ ++SQSH_EXTERN int squashfs_get_cached_block(struct super_block *s, void *buffer, ++ long long block, unsigned int offset, ++ int length, long long *next_block, ++ unsigned int *next_offset) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ int n, i, bytes, return_length = length; ++ long long next_index; ++ ++ TRACE("Entered squashfs_get_cached_block [%llx:%x]\n", block, offset); ++ ++ while (1) { ++ for (i = 0; i < squashfs_cached_blks; i++) ++ if (msblk->block_cache[i].block == block) ++ break; ++ ++ mutex_lock(&msblk->block_cache_mutex); ++ ++ if (i == squashfs_cached_blks) { ++ /* read inode header block */ ++ if (msblk->unused_cache_blks == 0) { ++ mutex_unlock(&msblk->block_cache_mutex); ++ wait_event(msblk->waitq, msblk->unused_cache_blks); ++ continue; ++ } ++ ++ i = msblk->next_cache; ++ for (n = 0; n < squashfs_cached_blks; n++) { ++ if (msblk->block_cache[i].block != SQUASHFS_USED_BLK) ++ break; ++ i = (i + 1) % squashfs_cached_blks; ++ } ++ ++ msblk->next_cache = (i + 1) % squashfs_cached_blks; ++ ++ if (msblk->block_cache[i].block == SQUASHFS_INVALID_BLK) { ++ msblk->block_cache[i].data = vmalloc(SQUASHFS_METADATA_SIZE); ++ if (msblk->block_cache[i].data == NULL) { ++ ERROR("Failed to allocate cache block\n"); ++ mutex_unlock(&msblk->block_cache_mutex); ++ goto out; ++ } ++ } ++ ++ msblk->block_cache[i].block = SQUASHFS_USED_BLK; ++ msblk->unused_cache_blks --; ++ mutex_unlock(&msblk->block_cache_mutex); ++ ++ msblk->block_cache[i].length = squashfs_read_data(s, ++ msblk->block_cache[i].data, block, 0, &next_index, ++ SQUASHFS_METADATA_SIZE); ++ ++ if (msblk->block_cache[i].length == 0) { ++ ERROR("Unable to read cache block [%llx:%x]\n", block, offset); ++ mutex_lock(&msblk->block_cache_mutex); ++ msblk->block_cache[i].block = SQUASHFS_INVALID_BLK; ++ msblk->unused_cache_blks ++; ++ smp_mb(); ++ vfree(msblk->block_cache[i].data); ++ wake_up(&msblk->waitq); ++ mutex_unlock(&msblk->block_cache_mutex); ++ goto out; ++ } ++ ++ mutex_lock(&msblk->block_cache_mutex); ++ msblk->block_cache[i].block = block; ++ msblk->block_cache[i].next_index = next_index; ++ msblk->unused_cache_blks ++; ++ smp_mb(); ++ wake_up(&msblk->waitq); ++ TRACE("Read cache block [%llx:%x]\n", block, offset); ++ } ++ ++ if (msblk->block_cache[i].block != block) { ++ mutex_unlock(&msblk->block_cache_mutex); ++ continue; ++ } ++ ++ bytes = msblk->block_cache[i].length - offset; ++ ++ if (bytes < 1) { ++ mutex_unlock(&msblk->block_cache_mutex); ++ goto out; ++ } else if (bytes >= length) { ++ if (buffer) ++ memcpy(buffer, msblk->block_cache[i].data + offset, length); ++ if (msblk->block_cache[i].length - offset == length) { ++ *next_block = msblk->block_cache[i].next_index; ++ *next_offset = 0; ++ } else { ++ *next_block = block; ++ *next_offset = offset + length; ++ } ++ mutex_unlock(&msblk->block_cache_mutex); ++ goto finish; ++ } else { ++ if (buffer) { ++ memcpy(buffer, msblk->block_cache[i].data + offset, bytes); ++ buffer = (char *) buffer + bytes; ++ } ++ block = msblk->block_cache[i].next_index; ++ mutex_unlock(&msblk->block_cache_mutex); ++ length -= bytes; ++ offset = 0; ++ } ++ } ++ ++finish: ++ return return_length; ++out: ++ return 0; ++} ++ ++ ++static int get_fragment_location(struct super_block *s, unsigned int fragment, ++ long long *fragment_start_block, ++ unsigned int *fragment_size) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ long long start_block = ++ msblk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)]; ++ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment); ++ struct squashfs_fragment_entry fragment_entry; ++ ++ if (msblk->swap) { ++ struct squashfs_fragment_entry sfragment_entry; ++ ++ if (!squashfs_get_cached_block(s, &sfragment_entry, start_block, offset, ++ sizeof(sfragment_entry), &start_block, &offset)) ++ goto out; ++ SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry); ++ } else ++ if (!squashfs_get_cached_block(s, &fragment_entry, start_block, offset, ++ sizeof(fragment_entry), &start_block, &offset)) ++ goto out; ++ ++ *fragment_start_block = fragment_entry.start_block; ++ *fragment_size = fragment_entry.size; ++ ++ return 1; ++ ++out: ++ return 0; ++} ++ ++ ++SQSH_EXTERN void release_cached_fragment(struct squashfs_sb_info *msblk, ++ struct squashfs_fragment_cache *fragment) ++{ ++ mutex_lock(&msblk->fragment_mutex); ++ fragment->locked --; ++ if (fragment->locked == 0) { ++ msblk->unused_frag_blks ++; ++ smp_mb(); ++ wake_up(&msblk->fragment_wait_queue); ++ } ++ mutex_unlock(&msblk->fragment_mutex); ++} ++ ++ ++SQSH_EXTERN ++struct squashfs_fragment_cache *get_cached_fragment(struct super_block *s, ++ long long start_block, int length) ++{ ++ int i, n; ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ ++ while (1) { ++ mutex_lock(&msblk->fragment_mutex); ++ ++ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS && ++ msblk->fragment[i].block != start_block; i++); ++ ++ if (i == SQUASHFS_CACHED_FRAGMENTS) { ++ if (msblk->unused_frag_blks == 0) { ++ mutex_unlock(&msblk->fragment_mutex); ++ wait_event(msblk->fragment_wait_queue, msblk->unused_frag_blks); ++ continue; ++ } ++ ++ i = msblk->next_fragment; ++ for (n = 0; n < SQUASHFS_CACHED_FRAGMENTS; n++) { ++ if (msblk->fragment[i].locked == 0) ++ break; ++ i = (i + 1) % SQUASHFS_CACHED_FRAGMENTS; ++ } ++ ++ msblk->next_fragment = (msblk->next_fragment + 1) % ++ SQUASHFS_CACHED_FRAGMENTS; ++ ++ if (msblk->fragment[i].data == NULL) { ++ msblk->fragment[i].data = vmalloc(sblk->block_size); ++ if (msblk->fragment[i].data == NULL) { ++ ERROR("Failed to allocate fragment cache block\n"); ++ mutex_unlock(&msblk->fragment_mutex); ++ goto out; ++ } ++ } ++ ++ msblk->unused_frag_blks --; ++ msblk->fragment[i].block = SQUASHFS_INVALID_BLK; ++ msblk->fragment[i].locked = 1; ++ mutex_unlock(&msblk->fragment_mutex); ++ ++ msblk->fragment[i].length = squashfs_read_data(s, ++ msblk->fragment[i].data, start_block, length, NULL, ++ sblk->block_size); ++ ++ if (msblk->fragment[i].length == 0) { ++ ERROR("Unable to read fragment cache block [%llx]\n", start_block); ++ msblk->fragment[i].locked = 0; ++ msblk->unused_frag_blks ++; ++ smp_mb(); ++ wake_up(&msblk->fragment_wait_queue); ++ goto out; ++ } ++ ++ mutex_lock(&msblk->fragment_mutex); ++ msblk->fragment[i].block = start_block; ++ TRACE("New fragment %d, start block %lld, locked %d\n", ++ i, msblk->fragment[i].block, msblk->fragment[i].locked); ++ mutex_unlock(&msblk->fragment_mutex); ++ break; ++ } ++ ++ if (msblk->fragment[i].locked == 0) ++ msblk->unused_frag_blks --; ++ msblk->fragment[i].locked++; ++ mutex_unlock(&msblk->fragment_mutex); ++ TRACE("Got fragment %d, start block %lld, locked %d\n", i, ++ msblk->fragment[i].block, msblk->fragment[i].locked); ++ break; ++ } ++ ++ return &msblk->fragment[i]; ++ ++out: ++ return NULL; ++} ++ ++ ++static void squashfs_new_inode(struct squashfs_sb_info *msblk, struct inode *i, ++ struct squashfs_base_inode_header *inodeb) ++{ ++ i->i_ino = inodeb->inode_number; ++ i->i_mtime.tv_sec = inodeb->mtime; ++ i->i_atime.tv_sec = inodeb->mtime; ++ i->i_ctime.tv_sec = inodeb->mtime; ++ i->i_uid = msblk->uid[inodeb->uid]; ++ i->i_mode = inodeb->mode; ++ i->i_size = 0; ++ ++ if (inodeb->guid == SQUASHFS_GUIDS) ++ i->i_gid = i->i_uid; ++ else ++ i->i_gid = msblk->guid[inodeb->guid]; ++} ++ ++ ++static squashfs_inode_t squashfs_inode_lookup(struct super_block *s, int ino) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ long long start = msblk->inode_lookup_table[SQUASHFS_LOOKUP_BLOCK(ino - 1)]; ++ int offset = SQUASHFS_LOOKUP_BLOCK_OFFSET(ino - 1); ++ squashfs_inode_t inode; ++ ++ TRACE("Entered squashfs_inode_lookup, inode_number = %d\n", ino); ++ ++ if (msblk->swap) { ++ squashfs_inode_t sinode; ++ ++ if (!squashfs_get_cached_block(s, &sinode, start, offset, ++ sizeof(sinode), &start, &offset)) ++ goto out; ++ SQUASHFS_SWAP_INODE_T((&inode), &sinode); ++ } else if (!squashfs_get_cached_block(s, &inode, start, offset, ++ sizeof(inode), &start, &offset)) ++ goto out; ++ ++ TRACE("squashfs_inode_lookup, inode = 0x%llx\n", inode); ++ ++ return inode; ++ ++out: ++ return SQUASHFS_INVALID_BLK; ++} ++ ++ ++static void vfs_read_inode(struct inode *i) ++{ ++ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; ++ squashfs_inode_t inode = squashfs_inode_lookup(i->i_sb, i->i_ino); ++ ++ TRACE("Entered vfs_read_inode\n"); ++ ++ if(inode != SQUASHFS_INVALID_BLK) ++ (msblk->read_inode)(i, inode); ++} ++ ++ ++static struct dentry *squashfs_get_parent(struct dentry *child) ++{ ++ struct inode *i = child->d_inode; ++ struct inode *parent = iget(i->i_sb, SQUASHFS_I(i)->u.s2.parent_inode); ++ struct dentry *rv; ++ ++ TRACE("Entered squashfs_get_parent\n"); ++ ++ if(parent == NULL) { ++ rv = ERR_PTR(-EACCES); ++ goto out; ++ } ++ ++ rv = d_alloc_anon(parent); ++ if(rv == NULL) ++ rv = ERR_PTR(-ENOMEM); ++ ++out: ++ return rv; ++} ++ ++ ++SQSH_EXTERN struct inode *squashfs_iget(struct super_block *s, ++ squashfs_inode_t inode, unsigned int inode_number) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct inode *i = iget_locked(s, inode_number); ++ ++ TRACE("Entered squashfs_iget\n"); ++ ++ if(i && (i->i_state & I_NEW)) { ++ (msblk->read_inode)(i, inode); ++ unlock_new_inode(i); ++ } ++ ++ return i; ++} ++ ++ ++static int squashfs_read_inode(struct inode *i, squashfs_inode_t inode) ++{ ++ struct super_block *s = i->i_sb; ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ long long block = SQUASHFS_INODE_BLK(inode) + sblk->inode_table_start; ++ unsigned int offset = SQUASHFS_INODE_OFFSET(inode); ++ long long next_block; ++ unsigned int next_offset; ++ union squashfs_inode_header id, sid; ++ struct squashfs_base_inode_header *inodeb = &id.base, *sinodeb = &sid.base; ++ ++ TRACE("Entered squashfs_read_inode\n"); ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, sinodeb, block, offset, ++ sizeof(*sinodeb), &next_block, &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_BASE_INODE_HEADER(inodeb, sinodeb, sizeof(*sinodeb)); ++ } else ++ if (!squashfs_get_cached_block(s, inodeb, block, offset, ++ sizeof(*inodeb), &next_block, &next_offset)) ++ goto failed_read; ++ ++ squashfs_new_inode(msblk, i, inodeb); ++ ++ switch(inodeb->inode_type) { ++ case SQUASHFS_FILE_TYPE: { ++ unsigned int frag_size; ++ long long frag_blk; ++ struct squashfs_reg_inode_header *inodep = &id.reg; ++ struct squashfs_reg_inode_header *sinodep = &sid.reg; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, sinodep, block, offset, ++ sizeof(*sinodep), &next_block, &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_REG_INODE_HEADER(inodep, sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, inodep, block, offset, ++ sizeof(*inodep), &next_block, &next_offset)) ++ goto failed_read; ++ ++ frag_blk = SQUASHFS_INVALID_BLK; ++ ++ if (inodep->fragment != SQUASHFS_INVALID_FRAG) ++ if(!get_fragment_location(s, inodep->fragment, &frag_blk, ++ &frag_size)) ++ goto failed_read; ++ ++ i->i_nlink = 1; ++ i->i_size = inodep->file_size; ++ i->i_fop = &generic_ro_fops; ++ i->i_mode |= S_IFREG; ++ i->i_blocks = ((i->i_size - 1) >> 9) + 1; ++ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; ++ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; ++ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; ++ SQUASHFS_I(i)->start_block = inodep->start_block; ++ SQUASHFS_I(i)->u.s1.block_list_start = next_block; ++ SQUASHFS_I(i)->offset = next_offset; ++ i->i_data.a_ops = &squashfs_aops; ++ ++ TRACE("File inode %x:%x, start_block %llx, " ++ "block_list_start %llx, offset %x\n", ++ SQUASHFS_INODE_BLK(inode), offset, ++ inodep->start_block, next_block, ++ next_offset); ++ break; ++ } ++ case SQUASHFS_LREG_TYPE: { ++ unsigned int frag_size; ++ long long frag_blk; ++ struct squashfs_lreg_inode_header *inodep = &id.lreg; ++ struct squashfs_lreg_inode_header *sinodep = &sid.lreg; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, sinodep, block, offset, ++ sizeof(*sinodep), &next_block, &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_LREG_INODE_HEADER(inodep, sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, inodep, block, offset, ++ sizeof(*inodep), &next_block, &next_offset)) ++ goto failed_read; ++ ++ frag_blk = SQUASHFS_INVALID_BLK; ++ ++ if (inodep->fragment != SQUASHFS_INVALID_FRAG) ++ if (!get_fragment_location(s, inodep->fragment, &frag_blk, ++ &frag_size)) ++ goto failed_read; ++ ++ i->i_nlink = inodep->nlink; ++ i->i_size = inodep->file_size; ++ i->i_fop = &generic_ro_fops; ++ i->i_mode |= S_IFREG; ++ i->i_blocks = ((i->i_size - 1) >> 9) + 1; ++ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; ++ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; ++ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; ++ SQUASHFS_I(i)->start_block = inodep->start_block; ++ SQUASHFS_I(i)->u.s1.block_list_start = next_block; ++ SQUASHFS_I(i)->offset = next_offset; ++ i->i_data.a_ops = &squashfs_aops; ++ ++ TRACE("File inode %x:%x, start_block %llx, " ++ "block_list_start %llx, offset %x\n", ++ SQUASHFS_INODE_BLK(inode), offset, ++ inodep->start_block, next_block, ++ next_offset); ++ break; ++ } ++ case SQUASHFS_DIR_TYPE: { ++ struct squashfs_dir_inode_header *inodep = &id.dir; ++ struct squashfs_dir_inode_header *sinodep = &sid.dir; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, sinodep, block, offset, ++ sizeof(*sinodep), &next_block, &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_DIR_INODE_HEADER(inodep, sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, inodep, block, offset, ++ sizeof(*inodep), &next_block, &next_offset)) ++ goto failed_read; ++ ++ i->i_nlink = inodep->nlink; ++ i->i_size = inodep->file_size; ++ i->i_op = &squashfs_dir_inode_ops; ++ i->i_fop = &squashfs_dir_ops; ++ i->i_mode |= S_IFDIR; ++ SQUASHFS_I(i)->start_block = inodep->start_block; ++ SQUASHFS_I(i)->offset = inodep->offset; ++ SQUASHFS_I(i)->u.s2.directory_index_count = 0; ++ SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode; ++ ++ TRACE("Directory inode %x:%x, start_block %x, offset " ++ "%x\n", SQUASHFS_INODE_BLK(inode), ++ offset, inodep->start_block, ++ inodep->offset); ++ break; ++ } ++ case SQUASHFS_LDIR_TYPE: { ++ struct squashfs_ldir_inode_header *inodep = &id.ldir; ++ struct squashfs_ldir_inode_header *sinodep = &sid.ldir; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, sinodep, block, offset, ++ sizeof(*sinodep), &next_block, &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_LDIR_INODE_HEADER(inodep, sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, inodep, block, offset, ++ sizeof(*inodep), &next_block, &next_offset)) ++ goto failed_read; ++ ++ i->i_nlink = inodep->nlink; ++ i->i_size = inodep->file_size; ++ i->i_op = &squashfs_dir_inode_ops; ++ i->i_fop = &squashfs_dir_ops; ++ i->i_mode |= S_IFDIR; ++ SQUASHFS_I(i)->start_block = inodep->start_block; ++ SQUASHFS_I(i)->offset = inodep->offset; ++ SQUASHFS_I(i)->u.s2.directory_index_start = next_block; ++ SQUASHFS_I(i)->u.s2.directory_index_offset = next_offset; ++ SQUASHFS_I(i)->u.s2.directory_index_count = inodep->i_count; ++ SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode; ++ ++ TRACE("Long directory inode %x:%x, start_block %x, offset %x\n", ++ SQUASHFS_INODE_BLK(inode), offset, ++ inodep->start_block, inodep->offset); ++ break; ++ } ++ case SQUASHFS_SYMLINK_TYPE: { ++ struct squashfs_symlink_inode_header *inodep = &id.symlink; ++ struct squashfs_symlink_inode_header *sinodep = &sid.symlink; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, sinodep, block, offset, ++ sizeof(*sinodep), &next_block, &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_SYMLINK_INODE_HEADER(inodep, sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, inodep, block, offset, ++ sizeof(*inodep), &next_block, &next_offset)) ++ goto failed_read; ++ ++ i->i_nlink = inodep->nlink; ++ i->i_size = inodep->symlink_size; ++ i->i_op = &page_symlink_inode_operations; ++ i->i_data.a_ops = &squashfs_symlink_aops; ++ i->i_mode |= S_IFLNK; ++ SQUASHFS_I(i)->start_block = next_block; ++ SQUASHFS_I(i)->offset = next_offset; ++ ++ TRACE("Symbolic link inode %x:%x, start_block %llx, offset %x\n", ++ SQUASHFS_INODE_BLK(inode), offset, ++ next_block, next_offset); ++ break; ++ } ++ case SQUASHFS_BLKDEV_TYPE: ++ case SQUASHFS_CHRDEV_TYPE: { ++ struct squashfs_dev_inode_header *inodep = &id.dev; ++ struct squashfs_dev_inode_header *sinodep = &sid.dev; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, sinodep, block, offset, ++ sizeof(*sinodep), &next_block, &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_DEV_INODE_HEADER(inodep, sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, inodep, block, offset, ++ sizeof(*inodep), &next_block, &next_offset)) ++ goto failed_read; ++ ++ i->i_nlink = inodep->nlink; ++ i->i_mode |= (inodeb->inode_type == SQUASHFS_CHRDEV_TYPE) ? ++ S_IFCHR : S_IFBLK; ++ init_special_inode(i, i->i_mode, old_decode_dev(inodep->rdev)); ++ ++ TRACE("Device inode %x:%x, rdev %x\n", ++ SQUASHFS_INODE_BLK(inode), offset, inodep->rdev); ++ break; ++ } ++ case SQUASHFS_FIFO_TYPE: ++ case SQUASHFS_SOCKET_TYPE: { ++ struct squashfs_ipc_inode_header *inodep = &id.ipc; ++ struct squashfs_ipc_inode_header *sinodep = &sid.ipc; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, sinodep, block, offset, ++ sizeof(*sinodep), &next_block, &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_IPC_INODE_HEADER(inodep, sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, inodep, block, offset, ++ sizeof(*inodep), &next_block, &next_offset)) ++ goto failed_read; ++ ++ i->i_nlink = inodep->nlink; ++ i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE) ++ ? S_IFIFO : S_IFSOCK; ++ init_special_inode(i, i->i_mode, 0); ++ break; ++ } ++ default: ++ ERROR("Unknown inode type %d in squashfs_iget!\n", ++ inodeb->inode_type); ++ goto failed_read1; ++ } ++ ++ return 1; ++ ++failed_read: ++ ERROR("Unable to read inode [%llx:%x]\n", block, offset); ++ ++failed_read1: ++ make_bad_inode(i); ++ return 0; ++} ++ ++ ++static int read_inode_lookup_table(struct super_block *s) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ unsigned int length = SQUASHFS_LOOKUP_BLOCK_BYTES(sblk->inodes); ++ ++ TRACE("In read_inode_lookup_table, length %d\n", length); ++ ++ /* Allocate inode lookup table */ ++ msblk->inode_lookup_table = kmalloc(length, GFP_KERNEL); ++ if (msblk->inode_lookup_table == NULL) { ++ ERROR("Failed to allocate inode lookup table\n"); ++ return 0; ++ } ++ ++ if (!squashfs_read_data(s, (char *) msblk->inode_lookup_table, ++ sblk->lookup_table_start, length | ++ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length)) { ++ ERROR("unable to read inode lookup table\n"); ++ return 0; ++ } ++ ++ if (msblk->swap) { ++ int i; ++ long long block; ++ ++ for (i = 0; i < SQUASHFS_LOOKUP_BLOCKS(sblk->inodes); i++) { ++ /* XXX */ ++ SQUASHFS_SWAP_LOOKUP_BLOCKS((&block), ++ &msblk->inode_lookup_table[i], 1); ++ msblk->inode_lookup_table[i] = block; ++ } ++ } ++ ++ return 1; ++} ++ ++ ++static int read_fragment_index_table(struct super_block *s) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ unsigned int length = SQUASHFS_FRAGMENT_INDEX_BYTES(sblk->fragments); ++ ++ if(length == 0) ++ return 1; ++ ++ /* Allocate fragment index table */ ++ msblk->fragment_index = kmalloc(length, GFP_KERNEL); ++ if (msblk->fragment_index == NULL) { ++ ERROR("Failed to allocate fragment index table\n"); ++ return 0; ++ } ++ ++ if (!squashfs_read_data(s, (char *) msblk->fragment_index, ++ sblk->fragment_table_start, length | ++ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length)) { ++ ERROR("unable to read fragment index table\n"); ++ return 0; ++ } ++ ++ if (msblk->swap) { ++ int i; ++ long long fragment; ++ ++ for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sblk->fragments); i++) { ++ /* XXX */ ++ SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment), ++ &msblk->fragment_index[i], 1); ++ msblk->fragment_index[i] = fragment; ++ } ++ } ++ ++ return 1; ++} ++ ++ ++static int readahead_metadata(struct super_block *s) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ int i; ++ ++ squashfs_cached_blks = SQUASHFS_CACHED_BLKS; ++ ++ /* Init inode_table block pointer array */ ++ msblk->block_cache = kmalloc(sizeof(struct squashfs_cache) * ++ squashfs_cached_blks, GFP_KERNEL); ++ if (msblk->block_cache == NULL) { ++ ERROR("Failed to allocate block cache\n"); ++ goto failed; ++ } ++ ++ for (i = 0; i < squashfs_cached_blks; i++) ++ msblk->block_cache[i].block = SQUASHFS_INVALID_BLK; ++ ++ msblk->next_cache = 0; ++ msblk->unused_cache_blks = squashfs_cached_blks; ++ ++ return 1; ++ ++failed: ++ return 0; ++} ++ ++ ++static int supported_squashfs_filesystem(struct squashfs_sb_info *msblk, int silent) ++{ ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ ++ msblk->read_inode = squashfs_read_inode; ++ msblk->read_blocklist = read_blocklist; ++ msblk->read_fragment_index_table = read_fragment_index_table; ++ ++ if (sblk->s_major == 1) { ++ if (!squashfs_1_0_supported(msblk)) { ++ SERROR("Major/Minor mismatch, Squashfs 1.0 filesystems " ++ "are unsupported\n"); ++ SERROR("Please recompile with Squashfs 1.0 support enabled\n"); ++ return 0; ++ } ++ } else if (sblk->s_major == 2) { ++ if (!squashfs_2_0_supported(msblk)) { ++ SERROR("Major/Minor mismatch, Squashfs 2.0 filesystems " ++ "are unsupported\n"); ++ SERROR("Please recompile with Squashfs 2.0 support enabled\n"); ++ return 0; ++ } ++ } else if(sblk->s_major != SQUASHFS_MAJOR || sblk->s_minor > ++ SQUASHFS_MINOR) { ++ SERROR("Major/Minor mismatch, trying to mount newer %d.%d " ++ "filesystem\n", sblk->s_major, sblk->s_minor); ++ SERROR("Please update your kernel\n"); ++ return 0; ++ } ++ ++ return 1; ++} ++ ++ ++static int squashfs_fill_super(struct super_block *s, void *data, int silent) ++{ ++ struct squashfs_sb_info *msblk; ++ struct squashfs_super_block *sblk; ++ int i; ++ char b[BDEVNAME_SIZE]; ++ struct inode *root; ++ ++ TRACE("Entered squashfs_fill_superblock\n"); ++ ++ s->s_fs_info = kzalloc(sizeof(struct squashfs_sb_info), GFP_KERNEL); ++ if (s->s_fs_info == NULL) { ++ ERROR("Failed to allocate superblock\n"); ++ goto failure; ++ } ++ msblk = s->s_fs_info; ++ ++ msblk->stream.workspace = vmalloc(zlib_inflate_workspacesize()); ++ if (msblk->stream.workspace == NULL) { ++ ERROR("Failed to allocate zlib workspace\n"); ++ goto failure; ++ } ++ sblk = &msblk->sblk; ++ ++ msblk->devblksize = sb_min_blocksize(s, BLOCK_SIZE); ++ msblk->devblksize_log2 = ffz(~msblk->devblksize); ++ ++ mutex_init(&msblk->read_data_mutex); ++ mutex_init(&msblk->read_page_mutex); ++ mutex_init(&msblk->block_cache_mutex); ++ mutex_init(&msblk->fragment_mutex); ++ mutex_init(&msblk->meta_index_mutex); ++ ++ init_waitqueue_head(&msblk->waitq); ++ init_waitqueue_head(&msblk->fragment_wait_queue); ++ ++ /* sblk->bytes_used is checked in squashfs_read_data to ensure reads are not ++ * beyond filesystem end. As we're using squashfs_read_data to read sblk here, ++ * first set sblk->bytes_used to a useful value */ ++ sblk->bytes_used = sizeof(struct squashfs_super_block); ++ if (!squashfs_read_data(s, (char *) sblk, SQUASHFS_START, ++ sizeof(struct squashfs_super_block) | ++ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, sizeof(struct squashfs_super_block))) { ++ SERROR("unable to read superblock\n"); ++ goto failed_mount; ++ } ++ ++ /* Check it is a SQUASHFS superblock */ ++ if ((s->s_magic = sblk->s_magic) != SQUASHFS_MAGIC) { ++ if (sblk->s_magic == SQUASHFS_MAGIC_SWAP) { ++ struct squashfs_super_block ssblk; ++ ++ WARNING("Mounting a different endian SQUASHFS filesystem on %s\n", ++ bdevname(s->s_bdev, b)); ++ ++ SQUASHFS_SWAP_SUPER_BLOCK(&ssblk, sblk); ++ memcpy(sblk, &ssblk, sizeof(struct squashfs_super_block)); ++ msblk->swap = 1; ++ } else { ++ SERROR("Can't find a SQUASHFS superblock on %s\n", ++ bdevname(s->s_bdev, b)); ++ goto failed_mount; ++ } ++ } ++ ++ /* Check the MAJOR & MINOR versions */ ++ if(!supported_squashfs_filesystem(msblk, silent)) ++ goto failed_mount; ++ ++ /* Check the filesystem does not extend beyond the end of the ++ block device */ ++ if(sblk->bytes_used < 0 || sblk->bytes_used > i_size_read(s->s_bdev->bd_inode)) ++ goto failed_mount; ++ ++ /* Check the root inode for sanity */ ++ if (SQUASHFS_INODE_OFFSET(sblk->root_inode) > SQUASHFS_METADATA_SIZE) ++ goto failed_mount; ++ ++ TRACE("Found valid superblock on %s\n", bdevname(s->s_bdev, b)); ++ TRACE("Inodes are %scompressed\n", SQUASHFS_UNCOMPRESSED_INODES(sblk->flags) ++ ? "un" : ""); ++ TRACE("Data is %scompressed\n", SQUASHFS_UNCOMPRESSED_DATA(sblk->flags) ++ ? "un" : ""); ++ TRACE("Check data is %spresent in the filesystem\n", ++ SQUASHFS_CHECK_DATA(sblk->flags) ? "" : "not "); ++ TRACE("Filesystem size %lld bytes\n", sblk->bytes_used); ++ TRACE("Block size %d\n", sblk->block_size); ++ TRACE("Number of inodes %d\n", sblk->inodes); ++ if (sblk->s_major > 1) ++ TRACE("Number of fragments %d\n", sblk->fragments); ++ TRACE("Number of uids %d\n", sblk->no_uids); ++ TRACE("Number of gids %d\n", sblk->no_guids); ++ TRACE("sblk->inode_table_start %llx\n", sblk->inode_table_start); ++ TRACE("sblk->directory_table_start %llx\n", sblk->directory_table_start); ++ if (sblk->s_major > 1) ++ TRACE("sblk->fragment_table_start %llx\n", sblk->fragment_table_start); ++ TRACE("sblk->uid_start %llx\n", sblk->uid_start); ++ ++ s->s_maxbytes = MAX_LFS_FILESIZE; ++ s->s_flags |= MS_RDONLY; ++ s->s_op = &squashfs_super_ops; ++ ++ if (readahead_metadata(s) == 0) ++ goto failed_mount; ++ ++ /* Allocate read_page block */ ++ msblk->read_page = vmalloc(sblk->block_size); ++ if (msblk->read_page == NULL) { ++ ERROR("Failed to allocate read_page block\n"); ++ goto failed_mount; ++ } ++ ++ /* Allocate uid and gid tables */ ++ msblk->uid = kmalloc((sblk->no_uids + sblk->no_guids) * ++ sizeof(unsigned int), GFP_KERNEL); ++ if (msblk->uid == NULL) { ++ ERROR("Failed to allocate uid/gid table\n"); ++ goto failed_mount; ++ } ++ msblk->guid = msblk->uid + sblk->no_uids; ++ ++ if (msblk->swap) { ++ unsigned int suid[sblk->no_uids + sblk->no_guids]; ++ ++ if (!squashfs_read_data(s, (char *) &suid, sblk->uid_start, ++ ((sblk->no_uids + sblk->no_guids) * ++ sizeof(unsigned int)) | ++ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, (sblk->no_uids + sblk->no_guids) * sizeof(unsigned int))) { ++ ERROR("unable to read uid/gid table\n"); ++ goto failed_mount; ++ } ++ ++ SQUASHFS_SWAP_DATA(msblk->uid, suid, (sblk->no_uids + ++ sblk->no_guids), (sizeof(unsigned int) * 8)); ++ } else ++ if (!squashfs_read_data(s, (char *) msblk->uid, sblk->uid_start, ++ ((sblk->no_uids + sblk->no_guids) * ++ sizeof(unsigned int)) | ++ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, (sblk->no_uids + sblk->no_guids) * sizeof(unsigned int))) { ++ ERROR("unable to read uid/gid table\n"); ++ goto failed_mount; ++ } ++ ++ ++ if (sblk->s_major == 1 && squashfs_1_0_supported(msblk)) ++ goto allocate_root; ++ ++ msblk->fragment = kzalloc(sizeof(struct squashfs_fragment_cache) * ++ SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL); ++ if (msblk->fragment == NULL) { ++ ERROR("Failed to allocate fragment block cache\n"); ++ goto failed_mount; ++ } ++ ++ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) { ++ msblk->fragment[i].block = SQUASHFS_INVALID_BLK; ++ } ++ ++ msblk->next_fragment = 0; ++ msblk->unused_frag_blks = SQUASHFS_CACHED_FRAGMENTS; ++ ++ /* Allocate and read fragment index table */ ++ if (msblk->read_fragment_index_table(s) == 0) ++ goto failed_mount; ++ ++ if(sblk->s_major < 3 || sblk->lookup_table_start == SQUASHFS_INVALID_BLK) ++ goto allocate_root; ++ ++ /* Allocate and read inode lookup table */ ++ if (read_inode_lookup_table(s) == 0) ++ goto failed_mount; ++ ++ s->s_op = &squashfs_export_super_ops; ++ s->s_export_op = &squashfs_export_ops; ++ ++allocate_root: ++ root = new_inode(s); ++ if ((msblk->read_inode)(root, sblk->root_inode) == 0) ++ goto failed_mount; ++ insert_inode_hash(root); ++ ++ s->s_root = d_alloc_root(root); ++ if (s->s_root == NULL) { ++ ERROR("Root inode create failed\n"); ++ iput(root); ++ goto failed_mount; ++ } ++ ++ TRACE("Leaving squashfs_fill_super\n"); ++ return 0; ++ ++failed_mount: ++ kfree(msblk->inode_lookup_table); ++ kfree(msblk->fragment_index); ++ kfree(msblk->fragment); ++ kfree(msblk->uid); ++ vfree(msblk->read_page); ++ kfree(msblk->block_cache); ++ kfree(msblk->fragment_index_2); ++ vfree(msblk->stream.workspace); ++ kfree(s->s_fs_info); ++ s->s_fs_info = NULL; ++ return -EINVAL; ++ ++failure: ++ return -ENOMEM; ++} ++ ++ ++static int squashfs_statfs(struct dentry *dentry, struct kstatfs *buf) ++{ ++ struct squashfs_sb_info *msblk = dentry->d_sb->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ ++ TRACE("Entered squashfs_statfs\n"); ++ ++ buf->f_type = SQUASHFS_MAGIC; ++ buf->f_bsize = sblk->block_size; ++ buf->f_blocks = ((sblk->bytes_used - 1) >> sblk->block_log) + 1; ++ buf->f_bfree = buf->f_bavail = 0; ++ buf->f_files = sblk->inodes; ++ buf->f_ffree = 0; ++ buf->f_namelen = SQUASHFS_NAME_LEN; ++ ++ return 0; ++} ++ ++ ++static int squashfs_symlink_readpage(struct file *file, struct page *page) ++{ ++ struct inode *inode = page->mapping->host; ++ int index = page->index << PAGE_CACHE_SHIFT, length, bytes, avail_bytes; ++ long long block = SQUASHFS_I(inode)->start_block; ++ int offset = SQUASHFS_I(inode)->offset; ++ void *pageaddr = kmap(page); ++ ++ TRACE("Entered squashfs_symlink_readpage, page index %ld, start block " ++ "%llx, offset %x\n", page->index, ++ SQUASHFS_I(inode)->start_block, ++ SQUASHFS_I(inode)->offset); ++ ++ for (length = 0; length < index; length += bytes) { ++ bytes = squashfs_get_cached_block(inode->i_sb, NULL, block, ++ offset, PAGE_CACHE_SIZE, &block, &offset); ++ if (bytes == 0) { ++ ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset); ++ goto skip_read; ++ } ++ } ++ ++ if (length != index) { ++ ERROR("(squashfs_symlink_readpage) length != index\n"); ++ bytes = 0; ++ goto skip_read; ++ } ++ ++ avail_bytes = min_t(int, i_size_read(inode) - length, PAGE_CACHE_SIZE); ++ ++ bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block, offset, ++ avail_bytes, &block, &offset); ++ if (bytes == 0) ++ ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset); ++ ++skip_read: ++ memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes); ++ kunmap(page); ++ flush_dcache_page(page); ++ SetPageUptodate(page); ++ unlock_page(page); ++ ++ return 0; ++} ++ ++ ++struct meta_index *locate_meta_index(struct inode *inode, int index, int offset) ++{ ++ struct meta_index *meta = NULL; ++ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; ++ int i; ++ ++ mutex_lock(&msblk->meta_index_mutex); ++ ++ TRACE("locate_meta_index: index %d, offset %d\n", index, offset); ++ ++ if (msblk->meta_index == NULL) ++ goto not_allocated; ++ ++ for (i = 0; i < SQUASHFS_META_NUMBER; i ++) { ++ if (msblk->meta_index[i].inode_number == inode->i_ino && ++ msblk->meta_index[i].offset >= offset && ++ msblk->meta_index[i].offset <= index && ++ msblk->meta_index[i].locked == 0) { ++ TRACE("locate_meta_index: entry %d, offset %d\n", i, ++ msblk->meta_index[i].offset); ++ meta = &msblk->meta_index[i]; ++ offset = meta->offset; ++ } ++ } ++ ++ if (meta) ++ meta->locked = 1; ++ ++not_allocated: ++ mutex_unlock(&msblk->meta_index_mutex); ++ ++ return meta; ++} ++ ++ ++struct meta_index *empty_meta_index(struct inode *inode, int offset, int skip) ++{ ++ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; ++ struct meta_index *meta = NULL; ++ int i; ++ ++ mutex_lock(&msblk->meta_index_mutex); ++ ++ TRACE("empty_meta_index: offset %d, skip %d\n", offset, skip); ++ ++ if (msblk->meta_index == NULL) { ++ msblk->meta_index = kmalloc(sizeof(struct meta_index) * ++ SQUASHFS_META_NUMBER, GFP_KERNEL); ++ if (msblk->meta_index == NULL) { ++ ERROR("Failed to allocate meta_index\n"); ++ goto failed; ++ } ++ for (i = 0; i < SQUASHFS_META_NUMBER; i++) { ++ msblk->meta_index[i].inode_number = 0; ++ msblk->meta_index[i].locked = 0; ++ } ++ msblk->next_meta_index = 0; ++ } ++ ++ for (i = SQUASHFS_META_NUMBER; i && ++ msblk->meta_index[msblk->next_meta_index].locked; i --) ++ msblk->next_meta_index = (msblk->next_meta_index + 1) % ++ SQUASHFS_META_NUMBER; ++ ++ if (i == 0) { ++ TRACE("empty_meta_index: failed!\n"); ++ goto failed; ++ } ++ ++ TRACE("empty_meta_index: returned meta entry %d, %p\n", ++ msblk->next_meta_index, ++ &msblk->meta_index[msblk->next_meta_index]); ++ ++ meta = &msblk->meta_index[msblk->next_meta_index]; ++ msblk->next_meta_index = (msblk->next_meta_index + 1) % ++ SQUASHFS_META_NUMBER; ++ ++ meta->inode_number = inode->i_ino; ++ meta->offset = offset; ++ meta->skip = skip; ++ meta->entries = 0; ++ meta->locked = 1; ++ ++failed: ++ mutex_unlock(&msblk->meta_index_mutex); ++ return meta; ++} ++ ++ ++void release_meta_index(struct inode *inode, struct meta_index *meta) ++{ ++ meta->locked = 0; ++ smp_mb(); ++} ++ ++ ++static int read_block_index(struct super_block *s, int blocks, char *block_list, ++ long long *start_block, int *offset) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ unsigned int *block_listp; ++ int block = 0; ++ ++ if (msblk->swap) { ++ char sblock_list[blocks << 2]; ++ ++ if (!squashfs_get_cached_block(s, sblock_list, *start_block, ++ *offset, blocks << 2, start_block, offset)) { ++ ERROR("Fail reading block list [%llx:%x]\n", *start_block, *offset); ++ goto failure; ++ } ++ SQUASHFS_SWAP_INTS(((unsigned int *)block_list), ++ ((unsigned int *)sblock_list), blocks); ++ } else { ++ if (!squashfs_get_cached_block(s, block_list, *start_block, ++ *offset, blocks << 2, start_block, offset)) { ++ ERROR("Fail reading block list [%llx:%x]\n", *start_block, *offset); ++ goto failure; ++ } ++ } ++ ++ for (block_listp = (unsigned int *) block_list; blocks; ++ block_listp++, blocks --) ++ block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp); ++ ++ return block; ++ ++failure: ++ return -1; ++} ++ ++ ++#define SIZE 256 ++ ++static inline int calculate_skip(int blocks) { ++ int skip = (blocks - 1) / ((SQUASHFS_SLOTS * SQUASHFS_META_ENTRIES + 1) * SQUASHFS_META_INDEXES); ++ return skip >= 7 ? 7 : skip + 1; ++} ++ ++ ++static int get_meta_index(struct inode *inode, int index, ++ long long *index_block, int *index_offset, ++ long long *data_block, char *block_list) ++{ ++ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ int skip = calculate_skip(i_size_read(inode) >> sblk->block_log); ++ int offset = 0; ++ struct meta_index *meta; ++ struct meta_entry *meta_entry; ++ long long cur_index_block = SQUASHFS_I(inode)->u.s1.block_list_start; ++ int cur_offset = SQUASHFS_I(inode)->offset; ++ long long cur_data_block = SQUASHFS_I(inode)->start_block; ++ int i; ++ ++ index /= SQUASHFS_META_INDEXES * skip; ++ ++ while (offset < index) { ++ meta = locate_meta_index(inode, index, offset + 1); ++ ++ if (meta == NULL) { ++ meta = empty_meta_index(inode, offset + 1, skip); ++ if (meta == NULL) ++ goto all_done; ++ } else { ++ if(meta->entries == 0) ++ goto failed; ++ /* XXX */ ++ offset = index < meta->offset + meta->entries ? index : ++ meta->offset + meta->entries - 1; ++ /* XXX */ ++ meta_entry = &meta->meta_entry[offset - meta->offset]; ++ cur_index_block = meta_entry->index_block + sblk->inode_table_start; ++ cur_offset = meta_entry->offset; ++ cur_data_block = meta_entry->data_block; ++ TRACE("get_meta_index: offset %d, meta->offset %d, " ++ "meta->entries %d\n", offset, meta->offset, meta->entries); ++ TRACE("get_meta_index: index_block 0x%llx, offset 0x%x" ++ " data_block 0x%llx\n", cur_index_block, ++ cur_offset, cur_data_block); ++ } ++ ++ for (i = meta->offset + meta->entries; i <= index && ++ i < meta->offset + SQUASHFS_META_ENTRIES; i++) { ++ int blocks = skip * SQUASHFS_META_INDEXES; ++ ++ while (blocks) { ++ int block = blocks > (SIZE >> 2) ? (SIZE >> 2) : blocks; ++ int res = read_block_index(inode->i_sb, block, block_list, ++ &cur_index_block, &cur_offset); ++ ++ if (res == -1) ++ goto failed; ++ ++ cur_data_block += res; ++ blocks -= block; ++ } ++ ++ meta_entry = &meta->meta_entry[i - meta->offset]; ++ meta_entry->index_block = cur_index_block - sblk->inode_table_start; ++ meta_entry->offset = cur_offset; ++ meta_entry->data_block = cur_data_block; ++ meta->entries ++; ++ offset ++; ++ } ++ ++ TRACE("get_meta_index: meta->offset %d, meta->entries %d\n", ++ meta->offset, meta->entries); ++ ++ release_meta_index(inode, meta); ++ } ++ ++all_done: ++ *index_block = cur_index_block; ++ *index_offset = cur_offset; ++ *data_block = cur_data_block; ++ ++ return offset * SQUASHFS_META_INDEXES * skip; ++ ++failed: ++ release_meta_index(inode, meta); ++ return -1; ++} ++ ++ ++static long long read_blocklist(struct inode *inode, int index, ++ int readahead_blks, char *block_list, ++ unsigned short **block_p, unsigned int *bsize) ++{ ++ long long block_ptr; ++ int offset; ++ long long block; ++ int res = get_meta_index(inode, index, &block_ptr, &offset, &block, ++ block_list); ++ ++ TRACE("read_blocklist: res %d, index %d, block_ptr 0x%llx, offset" ++ " 0x%x, block 0x%llx\n", res, index, block_ptr, offset, block); ++ ++ if(res == -1) ++ goto failure; ++ ++ index -= res; ++ ++ while (index) { ++ int blocks = index > (SIZE >> 2) ? (SIZE >> 2) : index; ++ int res = read_block_index(inode->i_sb, blocks, block_list, ++ &block_ptr, &offset); ++ if (res == -1) ++ goto failure; ++ block += res; ++ index -= blocks; ++ } ++ ++ if (read_block_index(inode->i_sb, 1, block_list, &block_ptr, &offset) == -1) ++ goto failure; ++ *bsize = *((unsigned int *) block_list); ++ ++ return block; ++ ++failure: ++ return 0; ++} ++ ++ ++static int squashfs_readpage(struct file *file, struct page *page) ++{ ++ struct inode *inode = page->mapping->host; ++ struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ unsigned char *block_list = NULL; ++ long long block; ++ unsigned int bsize, i; ++ int bytes; ++ int index = page->index >> (sblk->block_log - PAGE_CACHE_SHIFT); ++ void *pageaddr; ++ struct squashfs_fragment_cache *fragment = NULL; ++ char *data_ptr = msblk->read_page; ++ ++ int mask = (1 << (sblk->block_log - PAGE_CACHE_SHIFT)) - 1; ++ int start_index = page->index & ~mask; ++ int end_index = start_index | mask; ++ int file_end = i_size_read(inode) >> sblk->block_log; ++ int sparse = 0; ++ ++ TRACE("Entered squashfs_readpage, page index %lx, start block %llx\n", ++ page->index, SQUASHFS_I(inode)->start_block); ++ ++ if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> ++ PAGE_CACHE_SHIFT)) ++ goto out; ++ ++ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK ++ || index < file_end) { ++ block_list = kmalloc(SIZE, GFP_KERNEL); ++ if (block_list == NULL) { ++ ERROR("Failed to allocate block_list\n"); ++ goto error_out; ++ } ++ ++ block = (msblk->read_blocklist)(inode, index, 1, block_list, NULL, &bsize); ++ if (block == 0) ++ goto error_out; ++ ++ if (bsize == 0) { /* hole */ ++ bytes = index == file_end ? ++ (i_size_read(inode) & (sblk->block_size - 1)) : sblk->block_size; ++ sparse = 1; ++ } else { ++ mutex_lock(&msblk->read_page_mutex); ++ ++ bytes = squashfs_read_data(inode->i_sb, msblk->read_page, block, ++ bsize, NULL, sblk->block_size); ++ ++ if (bytes == 0) { ++ ERROR("Unable to read page, block %llx, size %x\n", block, bsize); ++ mutex_unlock(&msblk->read_page_mutex); ++ goto error_out; ++ } ++ } ++ } else { ++ fragment = get_cached_fragment(inode->i_sb, ++ SQUASHFS_I(inode)-> u.s1.fragment_start_block, ++ SQUASHFS_I(inode)->u.s1.fragment_size); ++ ++ if (fragment == NULL) { ++ ERROR("Unable to read page, block %llx, size %x\n", ++ SQUASHFS_I(inode)->u.s1.fragment_start_block, ++ (int) SQUASHFS_I(inode)->u.s1.fragment_size); ++ goto error_out; ++ } ++ bytes = i_size_read(inode) & (sblk->block_size - 1); ++ data_ptr = fragment->data + SQUASHFS_I(inode)->u.s1.fragment_offset; ++ } ++ ++ for (i = start_index; i <= end_index && bytes > 0; i++, ++ bytes -= PAGE_CACHE_SIZE, data_ptr += PAGE_CACHE_SIZE) { ++ struct page *push_page; ++ int avail = sparse ? 0 : min_t(unsigned int, bytes, PAGE_CACHE_SIZE); ++ ++ TRACE("bytes %d, i %d, available_bytes %d\n", bytes, i, avail); ++ ++ push_page = (i == page->index) ? page : ++ grab_cache_page_nowait(page->mapping, i); ++ ++ if (!push_page) ++ continue; ++ ++ if (PageUptodate(push_page)) ++ goto skip_page; ++ ++ pageaddr = kmap_atomic(push_page, KM_USER0); ++ memcpy(pageaddr, data_ptr, avail); ++ memset(pageaddr + avail, 0, PAGE_CACHE_SIZE - avail); ++ kunmap_atomic(pageaddr, KM_USER0); ++ flush_dcache_page(push_page); ++ SetPageUptodate(push_page); ++skip_page: ++ unlock_page(push_page); ++ if(i != page->index) ++ page_cache_release(push_page); ++ } ++ ++ if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK ++ || index < file_end) { ++ if (!sparse) ++ mutex_unlock(&msblk->read_page_mutex); ++ kfree(block_list); ++ } else ++ release_cached_fragment(msblk, fragment); ++ ++ return 0; ++ ++error_out: ++ SetPageError(page); ++out: ++ pageaddr = kmap_atomic(page, KM_USER0); ++ memset(pageaddr, 0, PAGE_CACHE_SIZE); ++ kunmap_atomic(pageaddr, KM_USER0); ++ flush_dcache_page(page); ++ if (!PageError(page)) ++ SetPageUptodate(page); ++ unlock_page(page); ++ ++ kfree(block_list); ++ return 0; ++} ++ ++ ++static int get_dir_index_using_offset(struct super_block *s, ++ long long *next_block, unsigned int *next_offset, ++ long long index_start, unsigned int index_offset, int i_count, ++ long long f_pos) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ int i, length = 0; ++ struct squashfs_dir_index index; ++ ++ TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n", ++ i_count, (unsigned int) f_pos); ++ ++ f_pos =- 3; ++ if (f_pos == 0) ++ goto finish; ++ ++ for (i = 0; i < i_count; i++) { ++ if (msblk->swap) { ++ struct squashfs_dir_index sindex; ++ squashfs_get_cached_block(s, &sindex, index_start, index_offset, ++ sizeof(sindex), &index_start, &index_offset); ++ SQUASHFS_SWAP_DIR_INDEX(&index, &sindex); ++ } else ++ squashfs_get_cached_block(s, &index, index_start, index_offset, ++ sizeof(index), &index_start, &index_offset); ++ ++ if (index.index > f_pos) ++ break; ++ ++ squashfs_get_cached_block(s, NULL, index_start, index_offset, ++ index.size + 1, &index_start, &index_offset); ++ ++ length = index.index; ++ *next_block = index.start_block + sblk->directory_table_start; ++ } ++ ++ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; ++ ++finish: ++ return length + 3; ++} ++ ++ ++static int get_dir_index_using_name(struct super_block *s, ++ long long *next_block, unsigned int *next_offset, ++ long long index_start, unsigned int index_offset, int i_count, ++ const char *name, int size) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ int i, length = 0; ++ struct squashfs_dir_index *index; ++ char *str; ++ ++ TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count); ++ ++ str = kmalloc(sizeof(struct squashfs_dir_index) + ++ (SQUASHFS_NAME_LEN + 1) * 2, GFP_KERNEL); ++ if (str == NULL) { ++ ERROR("Failed to allocate squashfs_dir_index\n"); ++ goto failure; ++ } ++ ++ index = (struct squashfs_dir_index *) (str + SQUASHFS_NAME_LEN + 1); ++ strncpy(str, name, size); ++ str[size] = '\0'; ++ ++ for (i = 0; i < i_count; i++) { ++ if (msblk->swap) { ++ struct squashfs_dir_index sindex; ++ squashfs_get_cached_block(s, &sindex, index_start, index_offset, ++ sizeof(sindex), &index_start, &index_offset); ++ SQUASHFS_SWAP_DIR_INDEX(index, &sindex); ++ } else ++ squashfs_get_cached_block(s, index, index_start, index_offset, ++ sizeof(struct squashfs_dir_index), &index_start, &index_offset); ++ ++ squashfs_get_cached_block(s, index->name, index_start, index_offset, ++ index->size + 1, &index_start, &index_offset); ++ ++ index->name[index->size + 1] = '\0'; ++ ++ if (strcmp(index->name, str) > 0) ++ break; ++ ++ length = index->index; ++ *next_block = index->start_block + sblk->directory_table_start; ++ } ++ ++ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; ++ kfree(str); ++ ++failure: ++ return length + 3; ++} ++ ++ ++static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir) ++{ ++ struct inode *i = file->f_dentry->d_inode; ++ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ long long next_block = SQUASHFS_I(i)->start_block + ++ sblk->directory_table_start; ++ int next_offset = SQUASHFS_I(i)->offset, length = 0, dir_count; ++ struct squashfs_dir_header dirh; ++ struct squashfs_dir_entry *dire; ++ ++ TRACE("Entered squashfs_readdir [%llx:%x]\n", next_block, next_offset); ++ ++ dire = kmalloc(sizeof(struct squashfs_dir_entry) + ++ SQUASHFS_NAME_LEN + 1, GFP_KERNEL); ++ if (dire == NULL) { ++ ERROR("Failed to allocate squashfs_dir_entry\n"); ++ goto finish; ++ } ++ ++ while(file->f_pos < 3) { ++ char *name; ++ int size, i_ino; ++ ++ if(file->f_pos == 0) { ++ name = "."; ++ size = 1; ++ i_ino = i->i_ino; ++ } else { ++ name = ".."; ++ size = 2; ++ i_ino = SQUASHFS_I(i)->u.s2.parent_inode; ++ } ++ TRACE("Calling filldir(%x, %s, %d, %d, %d, %d)\n", ++ (unsigned int) dirent, name, size, (int) ++ file->f_pos, i_ino, squashfs_filetype_table[1]); ++ ++ if (filldir(dirent, name, size, file->f_pos, i_ino, ++ squashfs_filetype_table[1]) < 0) { ++ TRACE("Filldir returned less than 0\n"); ++ goto finish; ++ } ++ file->f_pos += size; ++ } ++ ++ length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset, ++ SQUASHFS_I(i)->u.s2.directory_index_start, ++ SQUASHFS_I(i)->u.s2.directory_index_offset, ++ SQUASHFS_I(i)->u.s2.directory_index_count, file->f_pos); ++ ++ while (length < i_size_read(i)) { ++ /* read directory header */ ++ if (msblk->swap) { ++ struct squashfs_dir_header sdirh; ++ ++ if (!squashfs_get_cached_block(i->i_sb, &sdirh, next_block, ++ next_offset, sizeof(sdirh), &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(sdirh); ++ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh); ++ } else { ++ if (!squashfs_get_cached_block(i->i_sb, &dirh, next_block, ++ next_offset, sizeof(dirh), &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(dirh); ++ } ++ ++ dir_count = dirh.count + 1; ++ while (dir_count--) { ++ if (msblk->swap) { ++ struct squashfs_dir_entry sdire; ++ if (!squashfs_get_cached_block(i->i_sb, &sdire, next_block, ++ next_offset, sizeof(sdire), &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(sdire); ++ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire); ++ } else { ++ if (!squashfs_get_cached_block(i->i_sb, dire, next_block, ++ next_offset, sizeof(*dire), &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(*dire); ++ } ++ ++ if (!squashfs_get_cached_block(i->i_sb, dire->name, next_block, ++ next_offset, dire->size + 1, &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += dire->size + 1; ++ ++ if (file->f_pos >= length) ++ continue; ++ ++ dire->name[dire->size + 1] = '\0'; ++ ++ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d, %d)\n", ++ (unsigned int) dirent, dire->name, dire->size + 1, ++ (int) file->f_pos, dirh.start_block, dire->offset, ++ dirh.inode_number + dire->inode_number, ++ squashfs_filetype_table[dire->type]); ++ ++ if (filldir(dirent, dire->name, dire->size + 1, file->f_pos, ++ dirh.inode_number + dire->inode_number, ++ squashfs_filetype_table[dire->type]) < 0) { ++ TRACE("Filldir returned less than 0\n"); ++ goto finish; ++ } ++ file->f_pos = length; ++ } ++ } ++ ++finish: ++ kfree(dire); ++ return 0; ++ ++failed_read: ++ ERROR("Unable to read directory block [%llx:%x]\n", next_block, ++ next_offset); ++ kfree(dire); ++ return 0; ++} ++ ++ ++static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry, ++ struct nameidata *nd) ++{ ++ const unsigned char *name = dentry->d_name.name; ++ int len = dentry->d_name.len; ++ struct inode *inode = NULL; ++ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ long long next_block = SQUASHFS_I(i)->start_block + ++ sblk->directory_table_start; ++ int next_offset = SQUASHFS_I(i)->offset, length = 0, dir_count; ++ struct squashfs_dir_header dirh; ++ struct squashfs_dir_entry *dire; ++ ++ TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset); ++ ++ dire = kmalloc(sizeof(struct squashfs_dir_entry) + ++ SQUASHFS_NAME_LEN + 1, GFP_KERNEL); ++ if (dire == NULL) { ++ ERROR("Failed to allocate squashfs_dir_entry\n"); ++ goto exit_lookup; ++ } ++ ++ if (len > SQUASHFS_NAME_LEN) ++ goto exit_lookup; ++ ++ length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset, ++ SQUASHFS_I(i)->u.s2.directory_index_start, ++ SQUASHFS_I(i)->u.s2.directory_index_offset, ++ SQUASHFS_I(i)->u.s2.directory_index_count, name, len); ++ ++ while (length < i_size_read(i)) { ++ /* read directory header */ ++ if (msblk->swap) { ++ struct squashfs_dir_header sdirh; ++ if (!squashfs_get_cached_block(i->i_sb, &sdirh, next_block, ++ next_offset, sizeof(sdirh), &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(sdirh); ++ SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh); ++ } else { ++ if (!squashfs_get_cached_block(i->i_sb, &dirh, next_block, ++ next_offset, sizeof(dirh), &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(dirh); ++ } ++ ++ dir_count = dirh.count + 1; ++ while (dir_count--) { ++ if (msblk->swap) { ++ struct squashfs_dir_entry sdire; ++ if (!squashfs_get_cached_block(i->i_sb, &sdire, next_block, ++ next_offset, sizeof(sdire), &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(sdire); ++ SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire); ++ } else { ++ if (!squashfs_get_cached_block(i->i_sb, dire, next_block, ++ next_offset, sizeof(*dire), &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(*dire); ++ } ++ ++ if (!squashfs_get_cached_block(i->i_sb, dire->name, next_block, ++ next_offset, dire->size + 1, &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += dire->size + 1; ++ ++ if (name[0] < dire->name[0]) ++ goto exit_lookup; ++ ++ if ((len == dire->size + 1) && !strncmp(name, dire->name, len)) { ++ squashfs_inode_t ino = SQUASHFS_MKINODE(dirh.start_block, ++ dire->offset); ++ ++ TRACE("calling squashfs_iget for directory entry %s, inode" ++ " %x:%x, %d\n", name, dirh.start_block, dire->offset, ++ dirh.inode_number + dire->inode_number); ++ ++ inode = squashfs_iget(i->i_sb, ino, dirh.inode_number + dire->inode_number); ++ ++ goto exit_lookup; ++ } ++ } ++ } ++ ++exit_lookup: ++ kfree(dire); ++ if (inode) ++ return d_splice_alias(inode, dentry); ++ d_add(dentry, inode); ++ return ERR_PTR(0); ++ ++failed_read: ++ ERROR("Unable to read directory block [%llx:%x]\n", next_block, ++ next_offset); ++ goto exit_lookup; ++} ++ ++ ++static int squashfs_remount(struct super_block *s, int *flags, char *data) ++{ ++ *flags |= MS_RDONLY; ++ return 0; ++} ++ ++ ++static void squashfs_put_super(struct super_block *s) ++{ ++ int i; ++ ++ if (s->s_fs_info) { ++ struct squashfs_sb_info *sbi = s->s_fs_info; ++ if (sbi->block_cache) ++ for (i = 0; i < squashfs_cached_blks; i++) ++ if (sbi->block_cache[i].block != SQUASHFS_INVALID_BLK) ++ vfree(sbi->block_cache[i].data); ++ if (sbi->fragment) ++ for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) ++ vfree(sbi->fragment[i].data); ++ kfree(sbi->fragment); ++ kfree(sbi->block_cache); ++ vfree(sbi->read_page); ++ kfree(sbi->uid); ++ kfree(sbi->fragment_index); ++ kfree(sbi->fragment_index_2); ++ kfree(sbi->meta_index); ++ vfree(sbi->stream.workspace); ++ kfree(s->s_fs_info); ++ s->s_fs_info = NULL; ++ } ++} ++ ++ ++static int squashfs_get_sb(struct file_system_type *fs_type, int flags, ++ const char *dev_name, void *data, struct vfsmount *mnt) ++{ ++ return get_sb_bdev(fs_type, flags, dev_name, data, squashfs_fill_super, ++ mnt); ++} ++ ++ ++static int __init init_squashfs_fs(void) ++{ ++ int err = init_inodecache(); ++ if (err) ++ goto out; ++ ++ printk(KERN_INFO "squashfs: version 3.3 (2007/10/31) " ++ "Phillip Lougher\n"); ++ ++ err = register_filesystem(&squashfs_fs_type); ++ if (err) ++ destroy_inodecache(); ++ ++out: ++ return err; ++} ++ ++ ++static void __exit exit_squashfs_fs(void) ++{ ++ unregister_filesystem(&squashfs_fs_type); ++ destroy_inodecache(); ++} ++ ++ ++static struct kmem_cache * squashfs_inode_cachep; ++ ++ ++static struct inode *squashfs_alloc_inode(struct super_block *sb) ++{ ++ struct squashfs_inode_info *ei; ++ ei = kmem_cache_alloc(squashfs_inode_cachep, GFP_KERNEL); ++ return ei ? &ei->vfs_inode : NULL; ++} ++ ++ ++static void squashfs_destroy_inode(struct inode *inode) ++{ ++ kmem_cache_free(squashfs_inode_cachep, SQUASHFS_I(inode)); ++} ++ ++ ++static void init_once(struct kmem_cache *cachep, void *foo) ++{ ++ struct squashfs_inode_info *ei = foo; ++ ++ inode_init_once(&ei->vfs_inode); ++} ++ ++ ++static int __init init_inodecache(void) ++{ ++ squashfs_inode_cachep = kmem_cache_create("squashfs_inode_cache", ++ sizeof(struct squashfs_inode_info), 0, ++ SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT, init_once); ++ if (squashfs_inode_cachep == NULL) ++ return -ENOMEM; ++ return 0; ++} ++ ++ ++static void destroy_inodecache(void) ++{ ++ kmem_cache_destroy(squashfs_inode_cachep); ++} ++ ++ ++module_init(init_squashfs_fs); ++module_exit(exit_squashfs_fs); ++MODULE_DESCRIPTION("squashfs 3.2-r2-CVS, a compressed read-only filesystem"); ++MODULE_AUTHOR("Phillip Lougher "); ++MODULE_LICENSE("GPL"); +diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/Makefile linux-2.6.24-squashfs3.3/fs/squashfs/Makefile +--- linux-2.6.24/fs/squashfs/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.24-squashfs3.3/fs/squashfs/Makefile 2005-11-20 14:31:00.000000000 +0000 +@@ -0,0 +1,7 @@ ++# ++# Makefile for the linux squashfs routines. ++# ++ ++obj-$(CONFIG_SQUASHFS) += squashfs.o ++squashfs-y += inode.o ++squashfs-y += squashfs2_0.o +diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/squashfs2_0.c linux-2.6.24-squashfs3.3/fs/squashfs/squashfs2_0.c +--- linux-2.6.24/fs/squashfs/squashfs2_0.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.24-squashfs3.3/fs/squashfs/squashfs2_0.c 2007-10-25 00:43:59.000000000 +0100 +@@ -0,0 +1,740 @@ ++/* ++ * Squashfs - a compressed read only filesystem for Linux ++ * ++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 ++ * Phillip Lougher ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2, ++ * or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * squashfs2_0.c ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "squashfs.h" ++static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir); ++static struct dentry *squashfs_lookup_2(struct inode *, struct dentry *, ++ struct nameidata *); ++ ++static struct file_operations squashfs_dir_ops_2 = { ++ .read = generic_read_dir, ++ .readdir = squashfs_readdir_2 ++}; ++ ++static struct inode_operations squashfs_dir_inode_ops_2 = { ++ .lookup = squashfs_lookup_2 ++}; ++ ++static unsigned char squashfs_filetype_table[] = { ++ DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK ++}; ++ ++static int read_fragment_index_table_2(struct super_block *s) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ ++ if (!(msblk->fragment_index_2 = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES_2 ++ (sblk->fragments), GFP_KERNEL))) { ++ ERROR("Failed to allocate uid/gid table\n"); ++ return 0; ++ } ++ ++ if (SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments) && ++ !squashfs_read_data(s, (char *) ++ msblk->fragment_index_2, ++ sblk->fragment_table_start, ++ SQUASHFS_FRAGMENT_INDEX_BYTES_2 ++ (sblk->fragments) | ++ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments))) { ++ ERROR("unable to read fragment index table\n"); ++ return 0; ++ } ++ ++ if (msblk->swap) { ++ int i; ++ unsigned int fragment; ++ ++ for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES_2(sblk->fragments); ++ i++) { ++ SQUASHFS_SWAP_FRAGMENT_INDEXES_2((&fragment), ++ &msblk->fragment_index_2[i], 1); ++ msblk->fragment_index_2[i] = fragment; ++ } ++ } ++ ++ return 1; ++} ++ ++ ++static int get_fragment_location_2(struct super_block *s, unsigned int fragment, ++ long long *fragment_start_block, ++ unsigned int *fragment_size) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ long long start_block = ++ msblk->fragment_index_2[SQUASHFS_FRAGMENT_INDEX_2(fragment)]; ++ int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET_2(fragment); ++ struct squashfs_fragment_entry_2 fragment_entry; ++ ++ if (msblk->swap) { ++ struct squashfs_fragment_entry_2 sfragment_entry; ++ ++ if (!squashfs_get_cached_block(s, (char *) &sfragment_entry, ++ start_block, offset, ++ sizeof(sfragment_entry), &start_block, ++ &offset)) ++ goto out; ++ SQUASHFS_SWAP_FRAGMENT_ENTRY_2(&fragment_entry, &sfragment_entry); ++ } else ++ if (!squashfs_get_cached_block(s, (char *) &fragment_entry, ++ start_block, offset, ++ sizeof(fragment_entry), &start_block, ++ &offset)) ++ goto out; ++ ++ *fragment_start_block = fragment_entry.start_block; ++ *fragment_size = fragment_entry.size; ++ ++ return 1; ++ ++out: ++ return 0; ++} ++ ++ ++static void squashfs_new_inode(struct squashfs_sb_info *msblk, struct inode *i, ++ struct squashfs_base_inode_header_2 *inodeb, unsigned int ino) ++{ ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ ++ i->i_ino = ino; ++ i->i_mtime.tv_sec = sblk->mkfs_time; ++ i->i_atime.tv_sec = sblk->mkfs_time; ++ i->i_ctime.tv_sec = sblk->mkfs_time; ++ i->i_uid = msblk->uid[inodeb->uid]; ++ i->i_mode = inodeb->mode; ++ i->i_nlink = 1; ++ i->i_size = 0; ++ if (inodeb->guid == SQUASHFS_GUIDS) ++ i->i_gid = i->i_uid; ++ else ++ i->i_gid = msblk->guid[inodeb->guid]; ++} ++ ++ ++static int squashfs_read_inode_2(struct inode *i, squashfs_inode_t inode) ++{ ++ struct super_block *s = i->i_sb; ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ unsigned int block = SQUASHFS_INODE_BLK(inode) + ++ sblk->inode_table_start; ++ unsigned int offset = SQUASHFS_INODE_OFFSET(inode); ++ unsigned int ino = SQUASHFS_MK_VFS_INODE(block - ++ sblk->inode_table_start, offset); ++ long long next_block; ++ unsigned int next_offset; ++ union squashfs_inode_header_2 id, sid; ++ struct squashfs_base_inode_header_2 *inodeb = &id.base, ++ *sinodeb = &sid.base; ++ ++ TRACE("Entered squashfs_read_inode_2\n"); ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, (char *) sinodeb, block, ++ offset, sizeof(*sinodeb), &next_block, ++ &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_BASE_INODE_HEADER_2(inodeb, sinodeb, ++ sizeof(*sinodeb)); ++ } else ++ if (!squashfs_get_cached_block(s, (char *) inodeb, block, ++ offset, sizeof(*inodeb), &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ squashfs_new_inode(msblk, i, inodeb, ino); ++ ++ switch(inodeb->inode_type) { ++ case SQUASHFS_FILE_TYPE: { ++ struct squashfs_reg_inode_header_2 *inodep = &id.reg; ++ struct squashfs_reg_inode_header_2 *sinodep = &sid.reg; ++ long long frag_blk; ++ unsigned int frag_size = 0; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, (char *) ++ sinodep, block, offset, ++ sizeof(*sinodep), &next_block, ++ &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_REG_INODE_HEADER_2(inodep, sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, (char *) ++ inodep, block, offset, ++ sizeof(*inodep), &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ frag_blk = SQUASHFS_INVALID_BLK; ++ if (inodep->fragment != SQUASHFS_INVALID_FRAG && ++ !get_fragment_location_2(s, ++ inodep->fragment, &frag_blk, &frag_size)) ++ goto failed_read; ++ ++ i->i_size = inodep->file_size; ++ i->i_fop = &generic_ro_fops; ++ i->i_mode |= S_IFREG; ++ i->i_mtime.tv_sec = inodep->mtime; ++ i->i_atime.tv_sec = inodep->mtime; ++ i->i_ctime.tv_sec = inodep->mtime; ++ i->i_blocks = ((i->i_size - 1) >> 9) + 1; ++ SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk; ++ SQUASHFS_I(i)->u.s1.fragment_size = frag_size; ++ SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset; ++ SQUASHFS_I(i)->start_block = inodep->start_block; ++ SQUASHFS_I(i)->u.s1.block_list_start = next_block; ++ SQUASHFS_I(i)->offset = next_offset; ++ i->i_data.a_ops = &squashfs_aops; ++ ++ TRACE("File inode %x:%x, start_block %x, " ++ "block_list_start %llx, offset %x\n", ++ SQUASHFS_INODE_BLK(inode), offset, ++ inodep->start_block, next_block, ++ next_offset); ++ break; ++ } ++ case SQUASHFS_DIR_TYPE: { ++ struct squashfs_dir_inode_header_2 *inodep = &id.dir; ++ struct squashfs_dir_inode_header_2 *sinodep = &sid.dir; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, (char *) ++ sinodep, block, offset, ++ sizeof(*sinodep), &next_block, ++ &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_DIR_INODE_HEADER_2(inodep, sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, (char *) ++ inodep, block, offset, ++ sizeof(*inodep), &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ i->i_size = inodep->file_size; ++ i->i_op = &squashfs_dir_inode_ops_2; ++ i->i_fop = &squashfs_dir_ops_2; ++ i->i_mode |= S_IFDIR; ++ i->i_mtime.tv_sec = inodep->mtime; ++ i->i_atime.tv_sec = inodep->mtime; ++ i->i_ctime.tv_sec = inodep->mtime; ++ SQUASHFS_I(i)->start_block = inodep->start_block; ++ SQUASHFS_I(i)->offset = inodep->offset; ++ SQUASHFS_I(i)->u.s2.directory_index_count = 0; ++ SQUASHFS_I(i)->u.s2.parent_inode = 0; ++ ++ TRACE("Directory inode %x:%x, start_block %x, offset " ++ "%x\n", SQUASHFS_INODE_BLK(inode), ++ offset, inodep->start_block, ++ inodep->offset); ++ break; ++ } ++ case SQUASHFS_LDIR_TYPE: { ++ struct squashfs_ldir_inode_header_2 *inodep = &id.ldir; ++ struct squashfs_ldir_inode_header_2 *sinodep = &sid.ldir; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, (char *) ++ sinodep, block, offset, ++ sizeof(*sinodep), &next_block, ++ &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_LDIR_INODE_HEADER_2(inodep, ++ sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, (char *) ++ inodep, block, offset, ++ sizeof(*inodep), &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ i->i_size = inodep->file_size; ++ i->i_op = &squashfs_dir_inode_ops_2; ++ i->i_fop = &squashfs_dir_ops_2; ++ i->i_mode |= S_IFDIR; ++ i->i_mtime.tv_sec = inodep->mtime; ++ i->i_atime.tv_sec = inodep->mtime; ++ i->i_ctime.tv_sec = inodep->mtime; ++ SQUASHFS_I(i)->start_block = inodep->start_block; ++ SQUASHFS_I(i)->offset = inodep->offset; ++ SQUASHFS_I(i)->u.s2.directory_index_start = next_block; ++ SQUASHFS_I(i)->u.s2.directory_index_offset = ++ next_offset; ++ SQUASHFS_I(i)->u.s2.directory_index_count = ++ inodep->i_count; ++ SQUASHFS_I(i)->u.s2.parent_inode = 0; ++ ++ TRACE("Long directory inode %x:%x, start_block %x, " ++ "offset %x\n", ++ SQUASHFS_INODE_BLK(inode), offset, ++ inodep->start_block, inodep->offset); ++ break; ++ } ++ case SQUASHFS_SYMLINK_TYPE: { ++ struct squashfs_symlink_inode_header_2 *inodep = ++ &id.symlink; ++ struct squashfs_symlink_inode_header_2 *sinodep = ++ &sid.symlink; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, (char *) ++ sinodep, block, offset, ++ sizeof(*sinodep), &next_block, ++ &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(inodep, ++ sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, (char *) ++ inodep, block, offset, ++ sizeof(*inodep), &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ i->i_size = inodep->symlink_size; ++ i->i_op = &page_symlink_inode_operations; ++ i->i_data.a_ops = &squashfs_symlink_aops; ++ i->i_mode |= S_IFLNK; ++ SQUASHFS_I(i)->start_block = next_block; ++ SQUASHFS_I(i)->offset = next_offset; ++ ++ TRACE("Symbolic link inode %x:%x, start_block %llx, " ++ "offset %x\n", ++ SQUASHFS_INODE_BLK(inode), offset, ++ next_block, next_offset); ++ break; ++ } ++ case SQUASHFS_BLKDEV_TYPE: ++ case SQUASHFS_CHRDEV_TYPE: { ++ struct squashfs_dev_inode_header_2 *inodep = &id.dev; ++ struct squashfs_dev_inode_header_2 *sinodep = &sid.dev; ++ ++ if (msblk->swap) { ++ if (!squashfs_get_cached_block(s, (char *) ++ sinodep, block, offset, ++ sizeof(*sinodep), &next_block, ++ &next_offset)) ++ goto failed_read; ++ SQUASHFS_SWAP_DEV_INODE_HEADER_2(inodep, sinodep); ++ } else ++ if (!squashfs_get_cached_block(s, (char *) ++ inodep, block, offset, ++ sizeof(*inodep), &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ i->i_mode |= (inodeb->inode_type == ++ SQUASHFS_CHRDEV_TYPE) ? S_IFCHR : ++ S_IFBLK; ++ init_special_inode(i, i->i_mode, ++ old_decode_dev(inodep->rdev)); ++ ++ TRACE("Device inode %x:%x, rdev %x\n", ++ SQUASHFS_INODE_BLK(inode), offset, ++ inodep->rdev); ++ break; ++ } ++ case SQUASHFS_FIFO_TYPE: ++ case SQUASHFS_SOCKET_TYPE: { ++ ++ i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE) ++ ? S_IFIFO : S_IFSOCK; ++ init_special_inode(i, i->i_mode, 0); ++ break; ++ } ++ default: ++ ERROR("Unknown inode type %d in squashfs_iget!\n", ++ inodeb->inode_type); ++ goto failed_read1; ++ } ++ ++ return 1; ++ ++failed_read: ++ ERROR("Unable to read inode [%x:%x]\n", block, offset); ++ ++failed_read1: ++ return 0; ++} ++ ++ ++static int get_dir_index_using_offset(struct super_block *s, long long ++ *next_block, unsigned int *next_offset, ++ long long index_start, ++ unsigned int index_offset, int i_count, ++ long long f_pos) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ int i, length = 0; ++ struct squashfs_dir_index_2 index; ++ ++ TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n", ++ i_count, (unsigned int) f_pos); ++ ++ if (f_pos == 0) ++ goto finish; ++ ++ for (i = 0; i < i_count; i++) { ++ if (msblk->swap) { ++ struct squashfs_dir_index_2 sindex; ++ squashfs_get_cached_block(s, (char *) &sindex, ++ index_start, index_offset, ++ sizeof(sindex), &index_start, ++ &index_offset); ++ SQUASHFS_SWAP_DIR_INDEX_2(&index, &sindex); ++ } else ++ squashfs_get_cached_block(s, (char *) &index, ++ index_start, index_offset, ++ sizeof(index), &index_start, ++ &index_offset); ++ ++ if (index.index > f_pos) ++ break; ++ ++ squashfs_get_cached_block(s, NULL, index_start, index_offset, ++ index.size + 1, &index_start, ++ &index_offset); ++ ++ length = index.index; ++ *next_block = index.start_block + sblk->directory_table_start; ++ } ++ ++ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; ++ ++finish: ++ return length; ++} ++ ++ ++static int get_dir_index_using_name(struct super_block *s, long long ++ *next_block, unsigned int *next_offset, ++ long long index_start, ++ unsigned int index_offset, int i_count, ++ const char *name, int size) ++{ ++ struct squashfs_sb_info *msblk = s->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ int i, length = 0; ++ struct squashfs_dir_index_2 *index; ++ char *str; ++ ++ TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count); ++ ++ if (!(str = kmalloc(sizeof(struct squashfs_dir_index) + ++ (SQUASHFS_NAME_LEN + 1) * 2, GFP_KERNEL))) { ++ ERROR("Failed to allocate squashfs_dir_index\n"); ++ goto failure; ++ } ++ ++ index = (struct squashfs_dir_index_2 *) (str + SQUASHFS_NAME_LEN + 1); ++ strncpy(str, name, size); ++ str[size] = '\0'; ++ ++ for (i = 0; i < i_count; i++) { ++ if (msblk->swap) { ++ struct squashfs_dir_index_2 sindex; ++ squashfs_get_cached_block(s, (char *) &sindex, ++ index_start, index_offset, ++ sizeof(sindex), &index_start, ++ &index_offset); ++ SQUASHFS_SWAP_DIR_INDEX_2(index, &sindex); ++ } else ++ squashfs_get_cached_block(s, (char *) index, ++ index_start, index_offset, ++ sizeof(struct squashfs_dir_index_2), ++ &index_start, &index_offset); ++ ++ squashfs_get_cached_block(s, index->name, index_start, ++ index_offset, index->size + 1, ++ &index_start, &index_offset); ++ ++ index->name[index->size + 1] = '\0'; ++ ++ if (strcmp(index->name, str) > 0) ++ break; ++ ++ length = index->index; ++ *next_block = index->start_block + sblk->directory_table_start; ++ } ++ ++ *next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE; ++ kfree(str); ++failure: ++ return length; ++} ++ ++ ++static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir) ++{ ++ struct inode *i = file->f_dentry->d_inode; ++ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ long long next_block = SQUASHFS_I(i)->start_block + ++ sblk->directory_table_start; ++ int next_offset = SQUASHFS_I(i)->offset, length = 0, ++ dir_count; ++ struct squashfs_dir_header_2 dirh; ++ struct squashfs_dir_entry_2 *dire; ++ ++ TRACE("Entered squashfs_readdir_2 [%llx:%x]\n", next_block, next_offset); ++ ++ if (!(dire = kmalloc(sizeof(struct squashfs_dir_entry) + ++ SQUASHFS_NAME_LEN + 1, GFP_KERNEL))) { ++ ERROR("Failed to allocate squashfs_dir_entry\n"); ++ goto finish; ++ } ++ ++ length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset, ++ SQUASHFS_I(i)->u.s2.directory_index_start, ++ SQUASHFS_I(i)->u.s2.directory_index_offset, ++ SQUASHFS_I(i)->u.s2.directory_index_count, ++ file->f_pos); ++ ++ while (length < i_size_read(i)) { ++ /* read directory header */ ++ if (msblk->swap) { ++ struct squashfs_dir_header_2 sdirh; ++ ++ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, ++ next_block, next_offset, sizeof(sdirh), ++ &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(sdirh); ++ SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh); ++ } else { ++ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, ++ next_block, next_offset, sizeof(dirh), ++ &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(dirh); ++ } ++ ++ dir_count = dirh.count + 1; ++ while (dir_count--) { ++ if (msblk->swap) { ++ struct squashfs_dir_entry_2 sdire; ++ if (!squashfs_get_cached_block(i->i_sb, (char *) ++ &sdire, next_block, next_offset, ++ sizeof(sdire), &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(sdire); ++ SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire); ++ } else { ++ if (!squashfs_get_cached_block(i->i_sb, (char *) ++ dire, next_block, next_offset, ++ sizeof(*dire), &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(*dire); ++ } ++ ++ if (!squashfs_get_cached_block(i->i_sb, dire->name, ++ next_block, next_offset, ++ dire->size + 1, &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ length += dire->size + 1; ++ ++ if (file->f_pos >= length) ++ continue; ++ ++ dire->name[dire->size + 1] = '\0'; ++ ++ TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n", ++ (unsigned int) dirent, dire->name, ++ dire->size + 1, (int) file->f_pos, ++ dirh.start_block, dire->offset, ++ squashfs_filetype_table[dire->type]); ++ ++ if (filldir(dirent, dire->name, dire->size + 1, ++ file->f_pos, SQUASHFS_MK_VFS_INODE( ++ dirh.start_block, dire->offset), ++ squashfs_filetype_table[dire->type]) ++ < 0) { ++ TRACE("Filldir returned less than 0\n"); ++ goto finish; ++ } ++ file->f_pos = length; ++ } ++ } ++ ++finish: ++ kfree(dire); ++ return 0; ++ ++failed_read: ++ ERROR("Unable to read directory block [%llx:%x]\n", next_block, ++ next_offset); ++ kfree(dire); ++ return 0; ++} ++ ++ ++static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry, ++ struct nameidata *nd) ++{ ++ const unsigned char *name = dentry->d_name.name; ++ int len = dentry->d_name.len; ++ struct inode *inode = NULL; ++ struct squashfs_sb_info *msblk = i->i_sb->s_fs_info; ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ long long next_block = SQUASHFS_I(i)->start_block + ++ sblk->directory_table_start; ++ int next_offset = SQUASHFS_I(i)->offset, length = 0, ++ dir_count; ++ struct squashfs_dir_header_2 dirh; ++ struct squashfs_dir_entry_2 *dire; ++ int sorted = sblk->s_major == 2 && sblk->s_minor >= 1; ++ ++ TRACE("Entered squashfs_lookup_2 [%llx:%x]\n", next_block, next_offset); ++ ++ if (!(dire = kmalloc(sizeof(struct squashfs_dir_entry) + ++ SQUASHFS_NAME_LEN + 1, GFP_KERNEL))) { ++ ERROR("Failed to allocate squashfs_dir_entry\n"); ++ goto exit_loop; ++ } ++ ++ if (len > SQUASHFS_NAME_LEN) ++ goto exit_loop; ++ ++ length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset, ++ SQUASHFS_I(i)->u.s2.directory_index_start, ++ SQUASHFS_I(i)->u.s2.directory_index_offset, ++ SQUASHFS_I(i)->u.s2.directory_index_count, name, ++ len); ++ ++ while (length < i_size_read(i)) { ++ /* read directory header */ ++ if (msblk->swap) { ++ struct squashfs_dir_header_2 sdirh; ++ if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh, ++ next_block, next_offset, sizeof(sdirh), ++ &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(sdirh); ++ SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh); ++ } else { ++ if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh, ++ next_block, next_offset, sizeof(dirh), ++ &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(dirh); ++ } ++ ++ dir_count = dirh.count + 1; ++ while (dir_count--) { ++ if (msblk->swap) { ++ struct squashfs_dir_entry_2 sdire; ++ if (!squashfs_get_cached_block(i->i_sb, (char *) ++ &sdire, next_block,next_offset, ++ sizeof(sdire), &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(sdire); ++ SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire); ++ } else { ++ if (!squashfs_get_cached_block(i->i_sb, (char *) ++ dire, next_block,next_offset, ++ sizeof(*dire), &next_block, ++ &next_offset)) ++ goto failed_read; ++ ++ length += sizeof(*dire); ++ } ++ ++ if (!squashfs_get_cached_block(i->i_sb, dire->name, ++ next_block, next_offset, dire->size + 1, ++ &next_block, &next_offset)) ++ goto failed_read; ++ ++ length += dire->size + 1; ++ ++ if (sorted && name[0] < dire->name[0]) ++ goto exit_loop; ++ ++ if ((len == dire->size + 1) && !strncmp(name, ++ dire->name, len)) { ++ squashfs_inode_t ino = ++ SQUASHFS_MKINODE(dirh.start_block, ++ dire->offset); ++ unsigned int inode_number = SQUASHFS_MK_VFS_INODE(dirh.start_block, ++ dire->offset); ++ ++ TRACE("calling squashfs_iget for directory " ++ "entry %s, inode %x:%x, %lld\n", name, ++ dirh.start_block, dire->offset, ino); ++ ++ inode = squashfs_iget(i->i_sb, ino, inode_number); ++ ++ goto exit_loop; ++ } ++ } ++ } ++ ++exit_loop: ++ kfree(dire); ++ d_add(dentry, inode); ++ return ERR_PTR(0); ++ ++failed_read: ++ ERROR("Unable to read directory block [%llx:%x]\n", next_block, ++ next_offset); ++ goto exit_loop; ++} ++ ++ ++int squashfs_2_0_supported(struct squashfs_sb_info *msblk) ++{ ++ struct squashfs_super_block *sblk = &msblk->sblk; ++ ++ msblk->read_inode = squashfs_read_inode_2; ++ msblk->read_fragment_index_table = read_fragment_index_table_2; ++ ++ sblk->bytes_used = sblk->bytes_used_2; ++ sblk->uid_start = sblk->uid_start_2; ++ sblk->guid_start = sblk->guid_start_2; ++ sblk->inode_table_start = sblk->inode_table_start_2; ++ sblk->directory_table_start = sblk->directory_table_start_2; ++ sblk->fragment_table_start = sblk->fragment_table_start_2; ++ ++ return 1; ++} +diff -x .gitignore -Nurp linux-2.6.24/fs/squashfs/squashfs.h linux-2.6.24-squashfs3.3/fs/squashfs/squashfs.h +--- linux-2.6.24/fs/squashfs/squashfs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.24-squashfs3.3/fs/squashfs/squashfs.h 2007-08-19 04:23:16.000000000 +0100 +@@ -0,0 +1,86 @@ ++/* ++ * Squashfs - a compressed read only filesystem for Linux ++ * ++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 ++ * Phillip Lougher ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2, ++ * or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * squashfs.h ++ */ ++ ++#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY ++#undef CONFIG_SQUASHFS_1_0_COMPATIBILITY ++#endif ++ ++#ifdef SQUASHFS_TRACE ++#define TRACE(s, args...) printk(KERN_NOTICE "SQUASHFS: "s, ## args) ++#else ++#define TRACE(s, args...) {} ++#endif ++ ++#define ERROR(s, args...) printk(KERN_ERR "SQUASHFS error: "s, ## args) ++ ++#define SERROR(s, args...) do { \ ++ if (!silent) \ ++ printk(KERN_ERR "SQUASHFS error: "s, ## args);\ ++ } while(0) ++ ++#define WARNING(s, args...) printk(KERN_WARNING "SQUASHFS: "s, ## args) ++ ++static inline struct squashfs_inode_info *SQUASHFS_I(struct inode *inode) ++{ ++ return list_entry(inode, struct squashfs_inode_info, vfs_inode); ++} ++ ++#if defined(CONFIG_SQUASHFS_1_0_COMPATIBILITY ) || defined(CONFIG_SQUASHFS_2_0_COMPATIBILITY) ++#define SQSH_EXTERN ++extern unsigned int squashfs_read_data(struct super_block *s, char *buffer, ++ long long index, unsigned int length, ++ long long *next_index, int srclength); ++extern int squashfs_get_cached_block(struct super_block *s, void *buffer, ++ long long block, unsigned int offset, ++ int length, long long *next_block, ++ unsigned int *next_offset); ++extern void release_cached_fragment(struct squashfs_sb_info *msblk, struct ++ squashfs_fragment_cache *fragment); ++extern struct squashfs_fragment_cache *get_cached_fragment(struct super_block ++ *s, long long start_block, ++ int length); ++extern struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode, unsigned int inode_number); ++extern const struct address_space_operations squashfs_symlink_aops; ++extern const struct address_space_operations squashfs_aops; ++extern struct inode_operations squashfs_dir_inode_ops; ++#else ++#define SQSH_EXTERN static ++#endif ++ ++#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY ++extern int squashfs_1_0_supported(struct squashfs_sb_info *msblk); ++#else ++static inline int squashfs_1_0_supported(struct squashfs_sb_info *msblk) ++{ ++ return 0; ++} ++#endif ++ ++#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY ++extern int squashfs_2_0_supported(struct squashfs_sb_info *msblk); ++#else ++static inline int squashfs_2_0_supported(struct squashfs_sb_info *msblk) ++{ ++ return 0; ++} ++#endif +diff -x .gitignore -Nurp linux-2.6.24/include/linux/squashfs_fs.h linux-2.6.24-squashfs3.3/include/linux/squashfs_fs.h +--- linux-2.6.24/include/linux/squashfs_fs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.24-squashfs3.3/include/linux/squashfs_fs.h 2007-11-01 03:50:57.000000000 +0000 +@@ -0,0 +1,935 @@ ++#ifndef SQUASHFS_FS ++#define SQUASHFS_FS ++ ++/* ++ * Squashfs ++ * ++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 ++ * Phillip Lougher ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2, ++ * or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * squashfs_fs.h ++ */ ++ ++#ifndef CONFIG_SQUASHFS_2_0_COMPATIBILITY ++#define CONFIG_SQUASHFS_2_0_COMPATIBILITY ++#endif ++ ++#define SQUASHFS_CACHED_FRAGMENTS CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE ++#define SQUASHFS_MAJOR 3 ++#define SQUASHFS_MINOR 1 ++#define SQUASHFS_MAGIC 0x73717368 ++#define SQUASHFS_MAGIC_SWAP 0x68737173 ++#define SQUASHFS_START 0 ++ ++/* size of metadata (inode and directory) blocks */ ++#define SQUASHFS_METADATA_SIZE 8192 ++#define SQUASHFS_METADATA_LOG 13 ++ ++/* default size of data blocks */ ++#define SQUASHFS_FILE_SIZE 131072 ++#define SQUASHFS_FILE_LOG 17 ++ ++#define SQUASHFS_FILE_MAX_SIZE 1048576 ++ ++/* Max number of uids and gids */ ++#define SQUASHFS_UIDS 256 ++#define SQUASHFS_GUIDS 255 ++ ++/* Max length of filename (not 255) */ ++#define SQUASHFS_NAME_LEN 256 ++ ++#define SQUASHFS_INVALID ((long long) 0xffffffffffff) ++#define SQUASHFS_INVALID_FRAG ((unsigned int) 0xffffffff) ++#define SQUASHFS_INVALID_BLK ((long long) -1) ++#define SQUASHFS_USED_BLK ((long long) -2) ++ ++/* Filesystem flags */ ++#define SQUASHFS_NOI 0 ++#define SQUASHFS_NOD 1 ++#define SQUASHFS_CHECK 2 ++#define SQUASHFS_NOF 3 ++#define SQUASHFS_NO_FRAG 4 ++#define SQUASHFS_ALWAYS_FRAG 5 ++#define SQUASHFS_DUPLICATE 6 ++#define SQUASHFS_EXPORT 7 ++ ++#define SQUASHFS_BIT(flag, bit) ((flag >> bit) & 1) ++ ++#define SQUASHFS_UNCOMPRESSED_INODES(flags) SQUASHFS_BIT(flags, \ ++ SQUASHFS_NOI) ++ ++#define SQUASHFS_UNCOMPRESSED_DATA(flags) SQUASHFS_BIT(flags, \ ++ SQUASHFS_NOD) ++ ++#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ ++ SQUASHFS_NOF) ++ ++#define SQUASHFS_NO_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ ++ SQUASHFS_NO_FRAG) ++ ++#define SQUASHFS_ALWAYS_FRAGMENTS(flags) SQUASHFS_BIT(flags, \ ++ SQUASHFS_ALWAYS_FRAG) ++ ++#define SQUASHFS_DUPLICATES(flags) SQUASHFS_BIT(flags, \ ++ SQUASHFS_DUPLICATE) ++ ++#define SQUASHFS_EXPORTABLE(flags) SQUASHFS_BIT(flags, \ ++ SQUASHFS_EXPORT) ++ ++#define SQUASHFS_CHECK_DATA(flags) SQUASHFS_BIT(flags, \ ++ SQUASHFS_CHECK) ++ ++#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, \ ++ duplicate_checking, exortable) (noi | (nod << 1) | (check_data << 2) \ ++ | (nof << 3) | (no_frag << 4) | (always_frag << 5) | \ ++ (duplicate_checking << 6) | (exportable << 7)) ++ ++/* Max number of types and file types */ ++#define SQUASHFS_DIR_TYPE 1 ++#define SQUASHFS_FILE_TYPE 2 ++#define SQUASHFS_SYMLINK_TYPE 3 ++#define SQUASHFS_BLKDEV_TYPE 4 ++#define SQUASHFS_CHRDEV_TYPE 5 ++#define SQUASHFS_FIFO_TYPE 6 ++#define SQUASHFS_SOCKET_TYPE 7 ++#define SQUASHFS_LDIR_TYPE 8 ++#define SQUASHFS_LREG_TYPE 9 ++ ++/* 1.0 filesystem type definitions */ ++#define SQUASHFS_TYPES 5 ++#define SQUASHFS_IPC_TYPE 0 ++ ++/* Flag whether block is compressed or uncompressed, bit is set if block is ++ * uncompressed */ ++#define SQUASHFS_COMPRESSED_BIT (1 << 15) ++ ++#define SQUASHFS_COMPRESSED_SIZE(B) (((B) & ~SQUASHFS_COMPRESSED_BIT) ? \ ++ (B) & ~SQUASHFS_COMPRESSED_BIT : SQUASHFS_COMPRESSED_BIT) ++ ++#define SQUASHFS_COMPRESSED(B) (!((B) & SQUASHFS_COMPRESSED_BIT)) ++ ++#define SQUASHFS_COMPRESSED_BIT_BLOCK (1 << 24) ++ ++#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B) ((B) & \ ++ ~SQUASHFS_COMPRESSED_BIT_BLOCK) ++ ++#define SQUASHFS_COMPRESSED_BLOCK(B) (!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK)) ++ ++/* ++ * Inode number ops. Inodes consist of a compressed block number, and an ++ * uncompressed offset within that block ++ */ ++#define SQUASHFS_INODE_BLK(a) ((unsigned int) ((a) >> 16)) ++ ++#define SQUASHFS_INODE_OFFSET(a) ((unsigned int) ((a) & 0xffff)) ++ ++#define SQUASHFS_MKINODE(A, B) ((squashfs_inode_t)(((squashfs_inode_t) (A)\ ++ << 16) + (B))) ++ ++/* Compute 32 bit VFS inode number from squashfs inode number */ ++#define SQUASHFS_MK_VFS_INODE(a, b) ((unsigned int) (((a) << 8) + \ ++ ((b) >> 2) + 1)) ++/* XXX */ ++ ++/* Translate between VFS mode and squashfs mode */ ++#define SQUASHFS_MODE(a) ((a) & 0xfff) ++ ++/* fragment and fragment table defines */ ++#define SQUASHFS_FRAGMENT_BYTES(A) ((A) * sizeof(struct squashfs_fragment_entry)) ++ ++#define SQUASHFS_FRAGMENT_INDEX(A) (SQUASHFS_FRAGMENT_BYTES(A) / \ ++ SQUASHFS_METADATA_SIZE) ++ ++#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A) (SQUASHFS_FRAGMENT_BYTES(A) % \ ++ SQUASHFS_METADATA_SIZE) ++ ++#define SQUASHFS_FRAGMENT_INDEXES(A) ((SQUASHFS_FRAGMENT_BYTES(A) + \ ++ SQUASHFS_METADATA_SIZE - 1) / \ ++ SQUASHFS_METADATA_SIZE) ++ ++#define SQUASHFS_FRAGMENT_INDEX_BYTES(A) (SQUASHFS_FRAGMENT_INDEXES(A) *\ ++ sizeof(long long)) ++ ++/* inode lookup table defines */ ++#define SQUASHFS_LOOKUP_BYTES(A) ((A) * sizeof(squashfs_inode_t)) ++ ++#define SQUASHFS_LOOKUP_BLOCK(A) (SQUASHFS_LOOKUP_BYTES(A) / \ ++ SQUASHFS_METADATA_SIZE) ++ ++#define SQUASHFS_LOOKUP_BLOCK_OFFSET(A) (SQUASHFS_LOOKUP_BYTES(A) % \ ++ SQUASHFS_METADATA_SIZE) ++ ++#define SQUASHFS_LOOKUP_BLOCKS(A) ((SQUASHFS_LOOKUP_BYTES(A) + \ ++ SQUASHFS_METADATA_SIZE - 1) / \ ++ SQUASHFS_METADATA_SIZE) ++ ++#define SQUASHFS_LOOKUP_BLOCK_BYTES(A) (SQUASHFS_LOOKUP_BLOCKS(A) *\ ++ sizeof(long long)) ++ ++/* cached data constants for filesystem */ ++#define SQUASHFS_CACHED_BLKS 8 ++ ++#define SQUASHFS_MAX_FILE_SIZE_LOG 64 ++ ++#define SQUASHFS_MAX_FILE_SIZE ((long long) 1 << \ ++ (SQUASHFS_MAX_FILE_SIZE_LOG - 2)) ++ ++#define SQUASHFS_MARKER_BYTE 0xff ++ ++/* meta index cache */ ++#define SQUASHFS_META_INDEXES (SQUASHFS_METADATA_SIZE / sizeof(unsigned int)) ++#define SQUASHFS_META_ENTRIES 31 ++#define SQUASHFS_META_NUMBER 8 ++#define SQUASHFS_SLOTS 4 ++ ++struct meta_entry { ++ long long data_block; ++ unsigned int index_block; ++ unsigned short offset; ++ unsigned short pad; ++}; ++ ++struct meta_index { ++ unsigned int inode_number; ++ unsigned int offset; ++ unsigned short entries; ++ unsigned short skip; ++ unsigned short locked; ++ unsigned short pad; ++ struct meta_entry meta_entry[SQUASHFS_META_ENTRIES]; ++}; ++ ++ ++/* ++ * definitions for structures on disk ++ */ ++ ++typedef long long squashfs_block_t; ++typedef long long squashfs_inode_t; ++ ++struct squashfs_super_block { ++ unsigned int s_magic; ++ unsigned int inodes; ++ unsigned int bytes_used_2; ++ unsigned int uid_start_2; ++ unsigned int guid_start_2; ++ unsigned int inode_table_start_2; ++ unsigned int directory_table_start_2; ++ unsigned int s_major:16; ++ unsigned int s_minor:16; ++ unsigned int block_size_1:16; ++ unsigned int block_log:16; ++ unsigned int flags:8; ++ unsigned int no_uids:8; ++ unsigned int no_guids:8; ++ unsigned int mkfs_time /* time of filesystem creation */; ++ squashfs_inode_t root_inode; ++ unsigned int block_size; ++ unsigned int fragments; ++ unsigned int fragment_table_start_2; ++ long long bytes_used; ++ long long uid_start; ++ long long guid_start; ++ long long inode_table_start; ++ long long directory_table_start; ++ long long fragment_table_start; ++ long long lookup_table_start; ++} __attribute__ ((packed)); ++ ++struct squashfs_dir_index { ++ unsigned int index; ++ unsigned int start_block; ++ unsigned char size; ++ unsigned char name[0]; ++} __attribute__ ((packed)); ++ ++#define SQUASHFS_BASE_INODE_HEADER \ ++ unsigned int inode_type:4; \ ++ unsigned int mode:12; \ ++ unsigned int uid:8; \ ++ unsigned int guid:8; \ ++ unsigned int mtime; \ ++ unsigned int inode_number; ++ ++struct squashfs_base_inode_header { ++ SQUASHFS_BASE_INODE_HEADER; ++} __attribute__ ((packed)); ++ ++struct squashfs_ipc_inode_header { ++ SQUASHFS_BASE_INODE_HEADER; ++ unsigned int nlink; ++} __attribute__ ((packed)); ++ ++struct squashfs_dev_inode_header { ++ SQUASHFS_BASE_INODE_HEADER; ++ unsigned int nlink; ++ unsigned short rdev; ++} __attribute__ ((packed)); ++ ++struct squashfs_symlink_inode_header { ++ SQUASHFS_BASE_INODE_HEADER; ++ unsigned int nlink; ++ unsigned short symlink_size; ++ char symlink[0]; ++} __attribute__ ((packed)); ++ ++struct squashfs_reg_inode_header { ++ SQUASHFS_BASE_INODE_HEADER; ++ squashfs_block_t start_block; ++ unsigned int fragment; ++ unsigned int offset; ++ unsigned int file_size; ++ unsigned short block_list[0]; ++} __attribute__ ((packed)); ++ ++struct squashfs_lreg_inode_header { ++ SQUASHFS_BASE_INODE_HEADER; ++ unsigned int nlink; ++ squashfs_block_t start_block; ++ unsigned int fragment; ++ unsigned int offset; ++ long long file_size; ++ unsigned short block_list[0]; ++} __attribute__ ((packed)); ++ ++struct squashfs_dir_inode_header { ++ SQUASHFS_BASE_INODE_HEADER; ++ unsigned int nlink; ++ unsigned int file_size:19; ++ unsigned int offset:13; ++ unsigned int start_block; ++ unsigned int parent_inode; ++} __attribute__ ((packed)); ++ ++struct squashfs_ldir_inode_header { ++ SQUASHFS_BASE_INODE_HEADER; ++ unsigned int nlink; ++ unsigned int file_size:27; ++ unsigned int offset:13; ++ unsigned int start_block; ++ unsigned int i_count:16; ++ unsigned int parent_inode; ++ struct squashfs_dir_index index[0]; ++} __attribute__ ((packed)); ++ ++union squashfs_inode_header { ++ struct squashfs_base_inode_header base; ++ struct squashfs_dev_inode_header dev; ++ struct squashfs_symlink_inode_header symlink; ++ struct squashfs_reg_inode_header reg; ++ struct squashfs_lreg_inode_header lreg; ++ struct squashfs_dir_inode_header dir; ++ struct squashfs_ldir_inode_header ldir; ++ struct squashfs_ipc_inode_header ipc; ++}; ++ ++struct squashfs_dir_entry { ++ unsigned int offset:13; ++ unsigned int type:3; ++ unsigned int size:8; ++ int inode_number:16; ++ char name[0]; ++} __attribute__ ((packed)); ++ ++struct squashfs_dir_header { ++ unsigned int count:8; ++ unsigned int start_block; ++ unsigned int inode_number; ++} __attribute__ ((packed)); ++ ++struct squashfs_fragment_entry { ++ long long start_block; ++ unsigned int size; ++ unsigned int pending; ++} __attribute__ ((packed)); ++ ++extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen); ++extern int squashfs_uncompress_init(void); ++extern int squashfs_uncompress_exit(void); ++ ++/* ++ * macros to convert each packed bitfield structure from little endian to big ++ * endian and vice versa. These are needed when creating or using a filesystem ++ * on a machine with different byte ordering to the target architecture. ++ * ++ */ ++ ++#define SQUASHFS_SWAP_START \ ++ int bits;\ ++ int b_pos;\ ++ unsigned long long val;\ ++ unsigned char *s;\ ++ unsigned char *d; ++ ++#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_super_block));\ ++ SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\ ++ SQUASHFS_SWAP((s)->inodes, d, 32, 32);\ ++ SQUASHFS_SWAP((s)->bytes_used_2, d, 64, 32);\ ++ SQUASHFS_SWAP((s)->uid_start_2, d, 96, 32);\ ++ SQUASHFS_SWAP((s)->guid_start_2, d, 128, 32);\ ++ SQUASHFS_SWAP((s)->inode_table_start_2, d, 160, 32);\ ++ SQUASHFS_SWAP((s)->directory_table_start_2, d, 192, 32);\ ++ SQUASHFS_SWAP((s)->s_major, d, 224, 16);\ ++ SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\ ++ SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\ ++ SQUASHFS_SWAP((s)->block_log, d, 272, 16);\ ++ SQUASHFS_SWAP((s)->flags, d, 288, 8);\ ++ SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\ ++ SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\ ++ SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\ ++ SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\ ++ SQUASHFS_SWAP((s)->block_size, d, 408, 32);\ ++ SQUASHFS_SWAP((s)->fragments, d, 440, 32);\ ++ SQUASHFS_SWAP((s)->fragment_table_start_2, d, 472, 32);\ ++ SQUASHFS_SWAP((s)->bytes_used, d, 504, 64);\ ++ SQUASHFS_SWAP((s)->uid_start, d, 568, 64);\ ++ SQUASHFS_SWAP((s)->guid_start, d, 632, 64);\ ++ SQUASHFS_SWAP((s)->inode_table_start, d, 696, 64);\ ++ SQUASHFS_SWAP((s)->directory_table_start, d, 760, 64);\ ++ SQUASHFS_SWAP((s)->fragment_table_start, d, 824, 64);\ ++ SQUASHFS_SWAP((s)->lookup_table_start, d, 888, 64);\ ++} ++ ++#define SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\ ++ SQUASHFS_MEMSET(s, d, n);\ ++ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ ++ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ ++ SQUASHFS_SWAP((s)->uid, d, 16, 8);\ ++ SQUASHFS_SWAP((s)->guid, d, 24, 8);\ ++ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\ ++ SQUASHFS_SWAP((s)->inode_number, d, 64, 32); ++ ++#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\ ++} ++ ++#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ ++ sizeof(struct squashfs_ipc_inode_header))\ ++ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ ++} ++ ++#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ ++ sizeof(struct squashfs_dev_inode_header)); \ ++ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ ++ SQUASHFS_SWAP((s)->rdev, d, 128, 16);\ ++} ++ ++#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ ++ sizeof(struct squashfs_symlink_inode_header));\ ++ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ ++ SQUASHFS_SWAP((s)->symlink_size, d, 128, 16);\ ++} ++ ++#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ ++ sizeof(struct squashfs_reg_inode_header));\ ++ SQUASHFS_SWAP((s)->start_block, d, 96, 64);\ ++ SQUASHFS_SWAP((s)->fragment, d, 160, 32);\ ++ SQUASHFS_SWAP((s)->offset, d, 192, 32);\ ++ SQUASHFS_SWAP((s)->file_size, d, 224, 32);\ ++} ++ ++#define SQUASHFS_SWAP_LREG_INODE_HEADER(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ ++ sizeof(struct squashfs_lreg_inode_header));\ ++ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ ++ SQUASHFS_SWAP((s)->start_block, d, 128, 64);\ ++ SQUASHFS_SWAP((s)->fragment, d, 192, 32);\ ++ SQUASHFS_SWAP((s)->offset, d, 224, 32);\ ++ SQUASHFS_SWAP((s)->file_size, d, 256, 64);\ ++} ++ ++#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ ++ sizeof(struct squashfs_dir_inode_header));\ ++ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ ++ SQUASHFS_SWAP((s)->file_size, d, 128, 19);\ ++ SQUASHFS_SWAP((s)->offset, d, 147, 13);\ ++ SQUASHFS_SWAP((s)->start_block, d, 160, 32);\ ++ SQUASHFS_SWAP((s)->parent_inode, d, 192, 32);\ ++} ++ ++#define SQUASHFS_SWAP_LDIR_INODE_HEADER(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \ ++ sizeof(struct squashfs_ldir_inode_header));\ ++ SQUASHFS_SWAP((s)->nlink, d, 96, 32);\ ++ SQUASHFS_SWAP((s)->file_size, d, 128, 27);\ ++ SQUASHFS_SWAP((s)->offset, d, 155, 13);\ ++ SQUASHFS_SWAP((s)->start_block, d, 168, 32);\ ++ SQUASHFS_SWAP((s)->i_count, d, 200, 16);\ ++ SQUASHFS_SWAP((s)->parent_inode, d, 216, 32);\ ++} ++ ++#define SQUASHFS_SWAP_DIR_INDEX(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index));\ ++ SQUASHFS_SWAP((s)->index, d, 0, 32);\ ++ SQUASHFS_SWAP((s)->start_block, d, 32, 32);\ ++ SQUASHFS_SWAP((s)->size, d, 64, 8);\ ++} ++ ++#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header));\ ++ SQUASHFS_SWAP((s)->count, d, 0, 8);\ ++ SQUASHFS_SWAP((s)->start_block, d, 8, 32);\ ++ SQUASHFS_SWAP((s)->inode_number, d, 40, 32);\ ++} ++ ++#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry));\ ++ SQUASHFS_SWAP((s)->offset, d, 0, 13);\ ++ SQUASHFS_SWAP((s)->type, d, 13, 3);\ ++ SQUASHFS_SWAP((s)->size, d, 16, 8);\ ++ SQUASHFS_SWAP((s)->inode_number, d, 24, 16);\ ++} ++ ++#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry));\ ++ SQUASHFS_SWAP((s)->start_block, d, 0, 64);\ ++ SQUASHFS_SWAP((s)->size, d, 64, 32);\ ++} ++ ++#define SQUASHFS_SWAP_INODE_T(s, d) SQUASHFS_SWAP_LONG_LONGS(s, d, 1) ++ ++#define SQUASHFS_SWAP_SHORTS(s, d, n) {\ ++ int entry;\ ++ int bit_position;\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, n * 2);\ ++ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ ++ 16)\ ++ SQUASHFS_SWAP(s[entry], d, bit_position, 16);\ ++} ++ ++#define SQUASHFS_SWAP_INTS(s, d, n) {\ ++ int entry;\ ++ int bit_position;\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, n * 4);\ ++ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ ++ 32)\ ++ SQUASHFS_SWAP(s[entry], d, bit_position, 32);\ ++} ++ ++#define SQUASHFS_SWAP_LONG_LONGS(s, d, n) {\ ++ int entry;\ ++ int bit_position;\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, n * 8);\ ++ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ ++ 64)\ ++ SQUASHFS_SWAP(s[entry], d, bit_position, 64);\ ++} ++ ++#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\ ++ int entry;\ ++ int bit_position;\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, n * bits / 8);\ ++ for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \ ++ bits)\ ++ SQUASHFS_SWAP(s[entry], d, bit_position, bits);\ ++} ++ ++#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n) ++#define SQUASHFS_SWAP_LOOKUP_BLOCKS(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n) ++ ++#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY ++ ++struct squashfs_base_inode_header_1 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:4; /* index into uid table */ ++ unsigned int guid:4; /* index into guid table */ ++} __attribute__ ((packed)); ++ ++struct squashfs_ipc_inode_header_1 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:4; /* index into uid table */ ++ unsigned int guid:4; /* index into guid table */ ++ unsigned int type:4; ++ unsigned int offset:4; ++} __attribute__ ((packed)); ++ ++struct squashfs_dev_inode_header_1 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:4; /* index into uid table */ ++ unsigned int guid:4; /* index into guid table */ ++ unsigned short rdev; ++} __attribute__ ((packed)); ++ ++struct squashfs_symlink_inode_header_1 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:4; /* index into uid table */ ++ unsigned int guid:4; /* index into guid table */ ++ unsigned short symlink_size; ++ char symlink[0]; ++} __attribute__ ((packed)); ++ ++struct squashfs_reg_inode_header_1 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:4; /* index into uid table */ ++ unsigned int guid:4; /* index into guid table */ ++ unsigned int mtime; ++ unsigned int start_block; ++ unsigned int file_size:32; ++ unsigned short block_list[0]; ++} __attribute__ ((packed)); ++ ++struct squashfs_dir_inode_header_1 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:4; /* index into uid table */ ++ unsigned int guid:4; /* index into guid table */ ++ unsigned int file_size:19; ++ unsigned int offset:13; ++ unsigned int mtime; ++ unsigned int start_block:24; ++} __attribute__ ((packed)); ++ ++union squashfs_inode_header_1 { ++ struct squashfs_base_inode_header_1 base; ++ struct squashfs_dev_inode_header_1 dev; ++ struct squashfs_symlink_inode_header_1 symlink; ++ struct squashfs_reg_inode_header_1 reg; ++ struct squashfs_dir_inode_header_1 dir; ++ struct squashfs_ipc_inode_header_1 ipc; ++}; ++ ++#define SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n) \ ++ SQUASHFS_MEMSET(s, d, n);\ ++ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ ++ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ ++ SQUASHFS_SWAP((s)->uid, d, 16, 4);\ ++ SQUASHFS_SWAP((s)->guid, d, 20, 4); ++ ++#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n)\ ++} ++ ++#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ ++ sizeof(struct squashfs_ipc_inode_header_1));\ ++ SQUASHFS_SWAP((s)->type, d, 24, 4);\ ++ SQUASHFS_SWAP((s)->offset, d, 28, 4);\ ++} ++ ++#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ ++ sizeof(struct squashfs_dev_inode_header_1));\ ++ SQUASHFS_SWAP((s)->rdev, d, 24, 16);\ ++} ++ ++#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ ++ sizeof(struct squashfs_symlink_inode_header_1));\ ++ SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\ ++} ++ ++#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ ++ sizeof(struct squashfs_reg_inode_header_1));\ ++ SQUASHFS_SWAP((s)->mtime, d, 24, 32);\ ++ SQUASHFS_SWAP((s)->start_block, d, 56, 32);\ ++ SQUASHFS_SWAP((s)->file_size, d, 88, 32);\ ++} ++ ++#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \ ++ sizeof(struct squashfs_dir_inode_header_1));\ ++ SQUASHFS_SWAP((s)->file_size, d, 24, 19);\ ++ SQUASHFS_SWAP((s)->offset, d, 43, 13);\ ++ SQUASHFS_SWAP((s)->mtime, d, 56, 32);\ ++ SQUASHFS_SWAP((s)->start_block, d, 88, 24);\ ++} ++ ++#endif ++ ++#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY ++ ++struct squashfs_dir_index_2 { ++ unsigned int index:27; ++ unsigned int start_block:29; ++ unsigned char size; ++ unsigned char name[0]; ++} __attribute__ ((packed)); ++ ++struct squashfs_base_inode_header_2 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:8; /* index into uid table */ ++ unsigned int guid:8; /* index into guid table */ ++} __attribute__ ((packed)); ++ ++struct squashfs_ipc_inode_header_2 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:8; /* index into uid table */ ++ unsigned int guid:8; /* index into guid table */ ++} __attribute__ ((packed)); ++ ++struct squashfs_dev_inode_header_2 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:8; /* index into uid table */ ++ unsigned int guid:8; /* index into guid table */ ++ unsigned short rdev; ++} __attribute__ ((packed)); ++ ++struct squashfs_symlink_inode_header_2 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:8; /* index into uid table */ ++ unsigned int guid:8; /* index into guid table */ ++ unsigned short symlink_size; ++ char symlink[0]; ++} __attribute__ ((packed)); ++ ++struct squashfs_reg_inode_header_2 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:8; /* index into uid table */ ++ unsigned int guid:8; /* index into guid table */ ++ unsigned int mtime; ++ unsigned int start_block; ++ unsigned int fragment; ++ unsigned int offset; ++ unsigned int file_size:32; ++ unsigned short block_list[0]; ++} __attribute__ ((packed)); ++ ++struct squashfs_dir_inode_header_2 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:8; /* index into uid table */ ++ unsigned int guid:8; /* index into guid table */ ++ unsigned int file_size:19; ++ unsigned int offset:13; ++ unsigned int mtime; ++ unsigned int start_block:24; ++} __attribute__ ((packed)); ++ ++struct squashfs_ldir_inode_header_2 { ++ unsigned int inode_type:4; ++ unsigned int mode:12; /* protection */ ++ unsigned int uid:8; /* index into uid table */ ++ unsigned int guid:8; /* index into guid table */ ++ unsigned int file_size:27; ++ unsigned int offset:13; ++ unsigned int mtime; ++ unsigned int start_block:24; ++ unsigned int i_count:16; ++ struct squashfs_dir_index_2 index[0]; ++} __attribute__ ((packed)); ++ ++union squashfs_inode_header_2 { ++ struct squashfs_base_inode_header_2 base; ++ struct squashfs_dev_inode_header_2 dev; ++ struct squashfs_symlink_inode_header_2 symlink; ++ struct squashfs_reg_inode_header_2 reg; ++ struct squashfs_dir_inode_header_2 dir; ++ struct squashfs_ldir_inode_header_2 ldir; ++ struct squashfs_ipc_inode_header_2 ipc; ++}; ++ ++struct squashfs_dir_header_2 { ++ unsigned int count:8; ++ unsigned int start_block:24; ++} __attribute__ ((packed)); ++ ++struct squashfs_dir_entry_2 { ++ unsigned int offset:13; ++ unsigned int type:3; ++ unsigned int size:8; ++ char name[0]; ++} __attribute__ ((packed)); ++ ++struct squashfs_fragment_entry_2 { ++ unsigned int start_block; ++ unsigned int size; ++} __attribute__ ((packed)); ++ ++#define SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\ ++ SQUASHFS_MEMSET(s, d, n);\ ++ SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\ ++ SQUASHFS_SWAP((s)->mode, d, 4, 12);\ ++ SQUASHFS_SWAP((s)->uid, d, 16, 8);\ ++ SQUASHFS_SWAP((s)->guid, d, 24, 8);\ ++ ++#define SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, n) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\ ++} ++ ++#define SQUASHFS_SWAP_IPC_INODE_HEADER_2(s, d) \ ++ SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, sizeof(struct squashfs_ipc_inode_header_2)) ++ ++#define SQUASHFS_SWAP_DEV_INODE_HEADER_2(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ ++ sizeof(struct squashfs_dev_inode_header_2)); \ ++ SQUASHFS_SWAP((s)->rdev, d, 32, 16);\ ++} ++ ++#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ ++ sizeof(struct squashfs_symlink_inode_header_2));\ ++ SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\ ++} ++ ++#define SQUASHFS_SWAP_REG_INODE_HEADER_2(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ ++ sizeof(struct squashfs_reg_inode_header_2));\ ++ SQUASHFS_SWAP((s)->mtime, d, 32, 32);\ ++ SQUASHFS_SWAP((s)->start_block, d, 64, 32);\ ++ SQUASHFS_SWAP((s)->fragment, d, 96, 32);\ ++ SQUASHFS_SWAP((s)->offset, d, 128, 32);\ ++ SQUASHFS_SWAP((s)->file_size, d, 160, 32);\ ++} ++ ++#define SQUASHFS_SWAP_DIR_INODE_HEADER_2(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ ++ sizeof(struct squashfs_dir_inode_header_2));\ ++ SQUASHFS_SWAP((s)->file_size, d, 32, 19);\ ++ SQUASHFS_SWAP((s)->offset, d, 51, 13);\ ++ SQUASHFS_SWAP((s)->mtime, d, 64, 32);\ ++ SQUASHFS_SWAP((s)->start_block, d, 96, 24);\ ++} ++ ++#define SQUASHFS_SWAP_LDIR_INODE_HEADER_2(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \ ++ sizeof(struct squashfs_ldir_inode_header_2));\ ++ SQUASHFS_SWAP((s)->file_size, d, 32, 27);\ ++ SQUASHFS_SWAP((s)->offset, d, 59, 13);\ ++ SQUASHFS_SWAP((s)->mtime, d, 72, 32);\ ++ SQUASHFS_SWAP((s)->start_block, d, 104, 24);\ ++ SQUASHFS_SWAP((s)->i_count, d, 128, 16);\ ++} ++ ++#define SQUASHFS_SWAP_DIR_INDEX_2(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index_2));\ ++ SQUASHFS_SWAP((s)->index, d, 0, 27);\ ++ SQUASHFS_SWAP((s)->start_block, d, 27, 29);\ ++ SQUASHFS_SWAP((s)->size, d, 56, 8);\ ++} ++#define SQUASHFS_SWAP_DIR_HEADER_2(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header_2));\ ++ SQUASHFS_SWAP((s)->count, d, 0, 8);\ ++ SQUASHFS_SWAP((s)->start_block, d, 8, 24);\ ++} ++ ++#define SQUASHFS_SWAP_DIR_ENTRY_2(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry_2));\ ++ SQUASHFS_SWAP((s)->offset, d, 0, 13);\ ++ SQUASHFS_SWAP((s)->type, d, 13, 3);\ ++ SQUASHFS_SWAP((s)->size, d, 16, 8);\ ++} ++ ++#define SQUASHFS_SWAP_FRAGMENT_ENTRY_2(s, d) {\ ++ SQUASHFS_SWAP_START\ ++ SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry_2));\ ++ SQUASHFS_SWAP((s)->start_block, d, 0, 32);\ ++ SQUASHFS_SWAP((s)->size, d, 32, 32);\ ++} ++ ++#define SQUASHFS_SWAP_FRAGMENT_INDEXES_2(s, d, n) SQUASHFS_SWAP_INTS(s, d, n) ++ ++/* fragment and fragment table defines */ ++#define SQUASHFS_FRAGMENT_BYTES_2(A) (A * sizeof(struct squashfs_fragment_entry_2)) ++ ++#define SQUASHFS_FRAGMENT_INDEX_2(A) (SQUASHFS_FRAGMENT_BYTES_2(A) / \ ++ SQUASHFS_METADATA_SIZE) ++ ++#define SQUASHFS_FRAGMENT_INDEX_OFFSET_2(A) (SQUASHFS_FRAGMENT_BYTES_2(A) % \ ++ SQUASHFS_METADATA_SIZE) ++ ++#define SQUASHFS_FRAGMENT_INDEXES_2(A) ((SQUASHFS_FRAGMENT_BYTES_2(A) + \ ++ SQUASHFS_METADATA_SIZE - 1) / \ ++ SQUASHFS_METADATA_SIZE) ++ ++#define SQUASHFS_FRAGMENT_INDEX_BYTES_2(A) (SQUASHFS_FRAGMENT_INDEXES_2(A) *\ ++ sizeof(int)) ++ ++#endif ++ ++#ifdef __KERNEL__ ++ ++/* ++ * macros used to swap each structure entry, taking into account ++ * bitfields and different bitfield placing conventions on differing ++ * architectures ++ */ ++ ++#include ++ ++#ifdef __BIG_ENDIAN ++ /* convert from little endian to big endian */ ++#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \ ++ tbits, b_pos) ++#else ++ /* convert from big endian to little endian */ ++#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \ ++ tbits, 64 - tbits - b_pos) ++#endif ++ ++#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\ ++ b_pos = pos % 8;\ ++ val = 0;\ ++ s = (unsigned char *)p + (pos / 8);\ ++ d = ((unsigned char *) &val) + 7;\ ++ for(bits = 0; bits < (tbits + b_pos); bits += 8) \ ++ *d-- = *s++;\ ++ value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\ ++} ++ ++#define SQUASHFS_MEMSET(s, d, n) memset(s, 0, n); ++ ++#endif ++#endif +diff -x .gitignore -Nurp linux-2.6.24/include/linux/squashfs_fs_i.h linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_i.h +--- linux-2.6.24/include/linux/squashfs_fs_i.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_i.h 2007-08-19 04:24:08.000000000 +0100 +@@ -0,0 +1,45 @@ ++#ifndef SQUASHFS_FS_I ++#define SQUASHFS_FS_I ++/* ++ * Squashfs ++ * ++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 ++ * Phillip Lougher ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2, ++ * or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * squashfs_fs_i.h ++ */ ++ ++struct squashfs_inode_info { ++ long long start_block; ++ unsigned int offset; ++ union { ++ struct { ++ long long fragment_start_block; ++ unsigned int fragment_size; ++ unsigned int fragment_offset; ++ long long block_list_start; ++ } s1; ++ struct { ++ long long directory_index_start; ++ unsigned int directory_index_offset; ++ unsigned int directory_index_count; ++ unsigned int parent_inode; ++ } s2; ++ } u; ++ struct inode vfs_inode; ++}; ++#endif +diff -x .gitignore -Nurp linux-2.6.24/include/linux/squashfs_fs_sb.h linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_sb.h +--- linux-2.6.24/include/linux/squashfs_fs_sb.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.24-squashfs3.3/include/linux/squashfs_fs_sb.h 2007-08-19 04:24:26.000000000 +0100 +@@ -0,0 +1,76 @@ ++#ifndef SQUASHFS_FS_SB ++#define SQUASHFS_FS_SB ++/* ++ * Squashfs ++ * ++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 ++ * Phillip Lougher ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2, ++ * or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * squashfs_fs_sb.h ++ */ ++ ++#include ++ ++struct squashfs_cache { ++ long long block; ++ int length; ++ long long next_index; ++ char *data; ++}; ++ ++struct squashfs_fragment_cache { ++ long long block; ++ int length; ++ unsigned int locked; ++ char *data; ++}; ++ ++struct squashfs_sb_info { ++ struct squashfs_super_block sblk; ++ int devblksize; ++ int devblksize_log2; ++ int swap; ++ struct squashfs_cache *block_cache; ++ struct squashfs_fragment_cache *fragment; ++ int next_cache; ++ int next_fragment; ++ int next_meta_index; ++ unsigned int *uid; ++ unsigned int *guid; ++ long long *fragment_index; ++ unsigned int *fragment_index_2; ++ char *read_page; ++ struct mutex read_data_mutex; ++ struct mutex read_page_mutex; ++ struct mutex block_cache_mutex; ++ struct mutex fragment_mutex; ++ struct mutex meta_index_mutex; ++ wait_queue_head_t waitq; ++ wait_queue_head_t fragment_wait_queue; ++ struct meta_index *meta_index; ++ z_stream stream; ++ long long *inode_lookup_table; ++ int unused_cache_blks; ++ int unused_frag_blks; ++ int (*read_inode)(struct inode *i, squashfs_inode_t \ ++ inode); ++ long long (*read_blocklist)(struct inode *inode, int \ ++ index, int readahead_blks, char *block_list, \ ++ unsigned short **block_p, unsigned int *bsize); ++ int (*read_fragment_index_table)(struct super_block *s); ++}; ++#endif +diff -x .gitignore -Nurp linux-2.6.24/init/do_mounts_rd.c linux-2.6.24-squashfs3.3/init/do_mounts_rd.c +--- linux-2.6.24/init/do_mounts_rd.c 2007-10-25 17:41:49.000000000 +0100 ++++ linux-2.6.24-squashfs3.3/init/do_mounts_rd.c 2007-11-01 05:06:25.000000000 +0000 +@@ -5,6 +5,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -39,6 +40,7 @@ static int __init crd_load(int in_fd, in + * numbers could not be found. + * + * We currently check for the following magic numbers: ++ * squashfs + * minix + * ext2 + * romfs +@@ -53,6 +55,7 @@ identify_ramdisk_image(int fd, int start + struct ext2_super_block *ext2sb; + struct romfs_super_block *romfsb; + struct cramfs_super *cramfsb; ++ struct squashfs_super_block *squashfsb; + int nblocks = -1; + unsigned char *buf; + +@@ -64,6 +67,7 @@ identify_ramdisk_image(int fd, int start + ext2sb = (struct ext2_super_block *) buf; + romfsb = (struct romfs_super_block *) buf; + cramfsb = (struct cramfs_super *) buf; ++ squashfsb = (struct squashfs_super_block *) buf; + memset(buf, 0xe5, size); + + /* +@@ -101,6 +105,18 @@ identify_ramdisk_image(int fd, int start + goto done; + } + ++ /* squashfs is at block zero too */ ++ if (squashfsb->s_magic == SQUASHFS_MAGIC) { ++ printk(KERN_NOTICE ++ "RAMDISK: squashfs filesystem found at block %d\n", ++ start_block); ++ if (squashfsb->s_major < 3) ++ nblocks = (squashfsb->bytes_used_2+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS; ++ else ++ nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS; ++ goto done; ++ } ++ + /* + * Read block 1 to test for minix and ext2 superblock + */ diff --git a/meta/packages/linux/linux-rp-2.6.24/versatile-armv6.patch b/meta/packages/linux/linux-rp-2.6.24/versatile-armv6.patch new file mode 100644 index 0000000000..e2d0060ac3 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/versatile-armv6.patch @@ -0,0 +1,19 @@ +--- + arch/arm/mm/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- linux-2.6.23.orig/arch/arm/mm/Kconfig ++++ linux-2.6.23/arch/arm/mm/Kconfig +@@ -343,11 +343,11 @@ config CPU_XSC3 + select IO_36 + + # ARMv6 + config CPU_V6 + bool "Support ARM V6 processor" +- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 ++ depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_VERSATILE_PB + default y if ARCH_MX3 + select CPU_32v6 + select CPU_ABRT_EV6 + select CPU_CACHE_V6 + select CPU_CACHE_VIPT diff --git a/meta/packages/linux/linux-rp-2.6.24/zylonite-boot.patch b/meta/packages/linux/linux-rp-2.6.24/zylonite-boot.patch new file mode 100644 index 0000000000..f41928eca5 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.24/zylonite-boot.patch @@ -0,0 +1,45 @@ +From 04c42f566c68b757fdadf54e0e0f9dfe9f3f9b06 Mon Sep 17 00:00:00 2001 +From: eric miao +Date: Tue, 19 Jun 2007 16:42:53 +0800 +Subject: [PATCH] [PATCH] make zylonite boot + +1. reuse head-xscale.S for XSC3 + +2. add a workaround for machine ID assignment, which should be done + by boot loader +--- + arch/arm/boot/compressed/Makefile | 4 ++++ + arch/arm/boot/compressed/head-xscale.S | 5 +++++ + 2 files changed, 9 insertions(+) + +Index: linux-2.6-pxa3/arch/arm/boot/compressed/Makefile +=================================================================== +--- linux-2.6-pxa3.orig/arch/arm/boot/compressed/Makefile 2007-09-24 11:25:57.000000000 +0200 ++++ linux-2.6-pxa3/arch/arm/boot/compressed/Makefile 2007-09-24 12:26:53.000000000 +0200 +@@ -40,6 +40,10 @@ + OBJS += head-xscale.o + endif + ++ifeq ($(CONFIG_CPU_XSC3),y) ++OBJS += head-xscale.o ++endif ++ + ifeq ($(CONFIG_PXA_SHARPSL),y) + OBJS += head-sharpsl.o + endif +Index: linux-2.6-pxa3/arch/arm/boot/compressed/head-xscale.S +=================================================================== +--- linux-2.6-pxa3.orig/arch/arm/boot/compressed/head-xscale.S 2007-09-24 11:42:27.000000000 +0200 ++++ linux-2.6-pxa3/arch/arm/boot/compressed/head-xscale.S 2007-09-24 12:26:02.000000000 +0200 +@@ -33,6 +33,11 @@ + bic r0, r0, #0x1000 @ clear Icache + mcr p15, 0, r0, c1, c0, 0 + ++#ifdef CONFIG_MACH_ZYLONITE ++ mov r7, #(MACH_TYPE_ZYLONITE & 0xff) ++ orr r7, r7, #(MACH_TYPE_ZYLONITE & 0xff00) ++#endif ++ + #ifdef CONFIG_ARCH_COTULLA_IDP + mov r7, #MACH_TYPE_COTULLA_IDP + #endif diff --git a/meta/packages/linux/linux-rp_2.6.23+2.6.24-rc8.bb b/meta/packages/linux/linux-rp_2.6.23+2.6.24-rc8.bb deleted file mode 100644 index e1051b935d..0000000000 --- a/meta/packages/linux/linux-rp_2.6.23+2.6.24-rc8.bb +++ /dev/null @@ -1,146 +0,0 @@ -require linux-rp.inc - -PR = "r5" - -DEFAULT_PREFERENCE = "-1" -DEFAULT_PREFERENCE_collie = "1" - -# Handy URLs -# git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046 -# ${KERNELORG_MIRROR}pub/linux/kernel/v2.6/linux-2.6.18.tar.bz2 -# ${KERNELORG_MIRROR}pub/linux/kernel/v2.6/testing/linux-2.6.20-rc4.tar.bz2 -# ${KERNELORG_MIRROR}pub/linux/kernel/v2.6/testing/patch-2.6.18-rc6.bz2;patch=1 -# ${KERNELORG_MIRROR}pub/linux/kernel/v2.6/snapshots/patch-2.6.18-rc2-git1.bz2;patch=1 -# ${KERNELORG_MIRROR}pub/linux/kernel/people/alan/linux-2.6/2.6.10/patch-2.6.10-ac8.gz;patch=1 -# ${KERNELORG_MIRROR}pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc2/2.6.14-rc2-mm1/2.6.14-rc2-mm1.bz2;patch=1 - -# Patches submitted upstream are towards top of this list -# Hacks should clearly named and at the bottom -SRC_URI = "${KERNELORG_MIRROR}pub/linux/kernel/v2.6/linux-2.6.23.tar.bz2 \ - ${KERNELORG_MIRROR}pub/linux/kernel/v2.6/testing/patch-2.6.24-rc8.bz2;patch=1 \ - ${RPSRC}/export_atags-r2.patch;patch=1;status=pending \ - ${RPSRC}/lzo_crypto-r2.patch;patch=1;status=pending \ - ${RPSRC}/corgi_rearrange_lcd-r0.patch;patch=1;status=pending \ - ${RPSRC}/lzo_jffs2_sysfs-r1.patch;patch=1 \ - ${RPSRC}/hx2750_base-r33.patch;patch=1 \ - ${RPSRC}/hx2750_bl-r9.patch;patch=1 \ - ${RPSRC}/hx2750_pcmcia-r3.patch;patch=1 \ - ${RPSRC}/pxa_keys-r8.patch;patch=1 \ - ${RPSRC}/tsc2101-r18.patch;patch=1 \ - ${RPSRC}/hx2750_test1-r8.patch;patch=1 \ - ${RPSRC}/input_power-r10.patch;patch=1 \ - ${RPSRC}/pxa25x_cpufreq-r2.patch;patch=1 \ - ${RPSRC}/sharpsl_pm_fixes1-r0.patch;patch=1 \ - ${RPSRC}/pm_changes-r1.patch;patch=1 \ - ${RPSRC}/usb_add_epalloc-r4.patch;patch=1 \ - ${RPSRC}/usb_pxa27x_udc-r8.patch;patch=1 \ - ${RPSRC}/locomo_kbd_tweak-r1.patch;patch=1 \ - ${RPSRC}/pxa27x_overlay-r8.patch;patch=1 \ - ${RPSRC}/w100_extaccel-r2.patch;patch=1 \ - ${RPSRC}/w100_extmem-r1.patch;patch=1 \ - ${RPSRC}/poodle_pm-r5.patch;patch=1 \ - ${RPSRC}/poodle_lcd_hack-r0.patch;patch=1 \ - ${RPSRC}/poodle_asoc_fix-r1.patch;patch=1 \ - file://squashfs3.3.patch;patch=1;status=external \ - ${RPSRC}/logo_oh-r1.patch.bz2;patch=1;status=unmergable \ - ${RPSRC}/pxa-linking-bug.patch;patch=1;status=unmergable \ - file://hostap-monitor-mode.patch;patch=1;status=unmergable \ - file://serial-add-support-for-non-standard-xtals-to-16c950-driver.patch;patch=1;status=unmergable \ - ${RPSRC}/mmcsd_large_cards-r1.patch;patch=1;status=hack \ - ${RPSRC}/mmcsd_no_scr_check-r2.patch;patch=1;status=hack \ - ${RPSRC}/integrator_rgb-r1.patch;patch=1;status=hack \ - ${RPSRC}/pxa_cf_initorder_hack-r1.patch;patch=1;status=hack \ - file://pxa-serial-hack.patch;patch=1;status=hack \ - file://connectplus-remove-ide-HACK.patch;patch=1;status=hack \ - file://connectplus-prevent-oops-HACK.patch;patch=1;status=hack \ - file://htcuni.patch;patch=1 \ - file://binutils-buildid-arm.patch;patch=1 \ - file://versatile-armv6.patch;patch=1 \ - file://defconfig-c7x0 \ - file://defconfig-hx2000 \ - file://defconfig-collie \ - file://defconfig-poodle \ - file://defconfig-akita \ - file://defconfig-spitz \ - file://defconfig-qemuarm \ - file://defconfig-qemux86 \ - file://defconfig-bootcdx86 \ - file://defconfig-htcuniversal \ - file://defconfig-zylonite" -# Tosa disabled until the patchset is updated -# file://defconfig-tosa - -# FIXMEs before made default -# ${RPSRC}/mmcsd_no_scr_check-r1.patch;patch=1;status=hack - - -# Add this to enable pm debug code (useful with a serial lead) -# ${RPSRC}/sharpsl_pm_debug-r0.patch;patch=1 - -# Disabled until I find the reason this gives issues with cdc_subset -# ${RPSRC}/usb_rndis_tweaks-r0.patch;patch=1 \ - -# Is anything out of this still needed? Parts were commited to mainline by rmk (drivers/mfd/) -# (Pavel Machek's git tree has updated versions of this?) -# ${JLSRC}/zaurus-lcd-2.6.11.diff.gz;patch=1 - -# These patches are extracted from Pavel Machek's git tree -# (diff against vanilla kernel) -SRC_URI_append_collie = "\ - ${TKSRC}/mtd-sharp-flash-hack-r3.patch;patch=1 \ - ${TKSRC}/mcp-sa11x0-r0.patch;patch=1 \ - ${TKSRC}/locomo-r0.patch;patch=1 \ -# ${TKSRC}/locomo_spi-4.patch;patch=1 \ - ${TKSRC}/collie-kexec.patch;patch=1 \ - ${TKSRC}/sharpsl_pm-3.patch;patch=1 \ - ${TKSRC}/collie_pm-2.patch;patch=1 \ - ${TKSRC}/locomokeyb_suspendkey-2.patch;patch=1 \ - ${TKSRC}/ucb1x00_suspend.patch;patch=1 \ - ${TKSRC}/collie-ts.patch;patch=1 \ - ${TKSRC}/pcmcia_suspend.patch;patch=1 \ -" - -SRC_URI_append_poodle = "\ - ${RPSRC}/poodle_serial_vcc-r0.patch;patch=1 \ -" - -SRC_URI_append_tosa = "\ - ${CHSRC}/tmio-core-r4.patch;patch=1 \ - file://tmio-tc6393-r8.patch;patch=1 \ - file://tmio-nand-r8.patch;patch=1 \ - ${CHSRC}/tmio-fb-r6.patch;patch=1 \ - file://tmio-fb-r6-fix-r0.patch;patch=1 \ - file://tosa-keyboard-r19.patch;patch=1 \ - ${DOSRC}/tosa-pxaac97-r6.patch;patch=1 \ - file://tosa-pxaac97-r6-fix-r0.patch;patch=1 \ - ${DOSRC}/tosa-tmio-r6.patch;patch=1 \ - file://tosa-power-r18.patch;patch=1 \ - file://tosa-power-r18-fix-r0.patch;patch=1 \ - file://tosa-tmio-lcd-r10.patch;patch=1 \ - file://tosa-tmio-lcd-r10-fix-r0.patch;patch=1 \ - file://tosa-bluetooth-r8.patch;patch=1 \ - file://wm97xx-lg13-r0.patch;patch=1 \ - file://wm97xx-lg13-r0-fix-r0.patch;patch=1 \ - file://wm9712-suspend-cold-res-r2.patch;patch=1 \ - file://sharpsl-pm-postresume-r1.patch;patch=1 \ - file://wm9712-reset-loop-r2.patch;patch=1 \ - file://tosa-lcdnoise-r1.patch;patch=1 \ - file://tosa-lcdnoise-r1-fix-r0.patch;patch=1 \ - file://arm-dma-coherent.patch;patch=1 \ - file://usb-ohci-hooks-r3.patch;patch=1 \ - file://tmio-ohci-r9.patch;patch=1 \ - file://pxa2xx_udc_support_inverse_vbus.patch;patch=1 \ - file://tosa_udc_use_gpio_vbus.patch;patch=1 \ - " -# ${DOSRC}/tosa-asoc-r1.patch;patch=1 " - -SRC_URI_append_htcuniversal ="\ - file://htcuni-acx.patch;patch=1;status=external \ - " - -SRC_URI_append_zylonite ="\ - file://pxa_fb_overlay.patch;patch=1 \ - file://zylonite-boot.patch;patch=1 \ - " - -S = "${WORKDIR}/linux-2.6.23" diff --git a/meta/packages/linux/linux-rp_2.6.24.bb b/meta/packages/linux/linux-rp_2.6.24.bb new file mode 100644 index 0000000000..68fad7df62 --- /dev/null +++ b/meta/packages/linux/linux-rp_2.6.24.bb @@ -0,0 +1,146 @@ +require linux-rp.inc + +PR = "r0" + +DEFAULT_PREFERENCE = "-1" +DEFAULT_PREFERENCE_collie = "1" + +# Handy URLs +# git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046 +# ${KERNELORG_MIRROR}pub/linux/kernel/v2.6/linux-2.6.18.tar.bz2 +# ${KERNELORG_MIRROR}pub/linux/kernel/v2.6/testing/linux-2.6.20-rc4.tar.bz2 +# ${KERNELORG_MIRROR}pub/linux/kernel/v2.6/testing/patch-2.6.18-rc6.bz2;patch=1 +# ${KERNELORG_MIRROR}pub/linux/kernel/v2.6/snapshots/patch-2.6.18-rc2-git1.bz2;patch=1 +# ${KERNELORG_MIRROR}pub/linux/kernel/people/alan/linux-2.6/2.6.10/patch-2.6.10-ac8.gz;patch=1 +# ${KERNELORG_MIRROR}pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc2/2.6.14-rc2-mm1/2.6.14-rc2-mm1.bz2;patch=1 + +# Patches submitted upstream are towards top of this list +# Hacks should clearly named and at the bottom +SRC_URI = "${KERNELORG_MIRROR}pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2 \ + ${RPSRC}/export_atags-r2.patch;patch=1;status=pending \ + ${RPSRC}/lzo_crypto-r2.patch;patch=1;status=pending \ + ${RPSRC}/corgi_rearrange_lcd-r0.patch;patch=1;status=pending \ + ${RPSRC}/allow_disable_deferrred-r0.patch;patch=1 \ + ${RPSRC}/lzo_jffs2_sysfs-r1.patch;patch=1 \ + ${RPSRC}/hx2750_base-r33.patch;patch=1 \ + ${RPSRC}/hx2750_bl-r9.patch;patch=1 \ + ${RPSRC}/hx2750_pcmcia-r3.patch;patch=1 \ + ${RPSRC}/pxa_keys-r8.patch;patch=1 \ + ${RPSRC}/tsc2101-r18.patch;patch=1 \ + ${RPSRC}/hx2750_test1-r8.patch;patch=1 \ + ${RPSRC}/input_power-r10.patch;patch=1 \ + ${RPSRC}/pxa25x_cpufreq-r2.patch;patch=1 \ + ${RPSRC}/sharpsl_pm_fixes1-r0.patch;patch=1 \ + ${RPSRC}/pm_changes-r1.patch;patch=1 \ + ${RPSRC}/usb_add_epalloc-r4.patch;patch=1 \ + ${RPSRC}/usb_pxa27x_udc-r8.patch;patch=1 \ + ${RPSRC}/locomo_kbd_tweak-r1.patch;patch=1 \ + ${RPSRC}/pxa27x_overlay-r8.patch;patch=1 \ + ${RPSRC}/w100_extaccel-r2.patch;patch=1 \ + ${RPSRC}/w100_extmem-r1.patch;patch=1 \ + ${RPSRC}/poodle_pm-r5.patch;patch=1 \ + ${RPSRC}/poodle_lcd_hack-r0.patch;patch=1 \ + ${RPSRC}/poodle_asoc_fix-r1.patch;patch=1 \ + file://squashfs3.3.patch;patch=1;status=external \ + ${RPSRC}/logo_oh-r1.patch.bz2;patch=1;status=unmergable \ + ${RPSRC}/pxa-linking-bug.patch;patch=1;status=unmergable \ + file://hostap-monitor-mode.patch;patch=1;status=unmergable \ + file://serial-add-support-for-non-standard-xtals-to-16c950-driver.patch;patch=1;status=unmergable \ + ${RPSRC}/mmcsd_large_cards-r1.patch;patch=1;status=hack \ + ${RPSRC}/mmcsd_no_scr_check-r2.patch;patch=1;status=hack \ + ${RPSRC}/integrator_rgb-r1.patch;patch=1;status=hack \ + ${RPSRC}/pxa_cf_initorder_hack-r1.patch;patch=1;status=hack \ + file://pxa-serial-hack.patch;patch=1;status=hack \ + file://connectplus-remove-ide-HACK.patch;patch=1;status=hack \ + file://connectplus-prevent-oops-HACK.patch;patch=1;status=hack \ + file://htcuni.patch;patch=1 \ + file://binutils-buildid-arm.patch;patch=1 \ + file://versatile-armv6.patch;patch=1 \ + file://defconfig-c7x0 \ + file://defconfig-hx2000 \ + file://defconfig-collie \ + file://defconfig-poodle \ + file://defconfig-akita \ + file://defconfig-spitz \ + file://defconfig-qemuarm \ + file://defconfig-qemux86 \ + file://defconfig-bootcdx86 \ + file://defconfig-htcuniversal \ + file://defconfig-zylonite" +# Tosa disabled until the patchset is updated +# file://defconfig-tosa + +# FIXMEs before made default +# ${RPSRC}/mmcsd_no_scr_check-r1.patch;patch=1;status=hack + + +# Add this to enable pm debug code (useful with a serial lead) +# ${RPSRC}/sharpsl_pm_debug-r0.patch;patch=1 + +# Disabled until I find the reason this gives issues with cdc_subset +# ${RPSRC}/usb_rndis_tweaks-r0.patch;patch=1 \ + +# Is anything out of this still needed? Parts were commited to mainline by rmk (drivers/mfd/) +# (Pavel Machek's git tree has updated versions of this?) +# ${JLSRC}/zaurus-lcd-2.6.11.diff.gz;patch=1 + +# These patches are extracted from Pavel Machek's git tree +# (diff against vanilla kernel) +SRC_URI_append_collie = "\ + ${TKSRC}/mtd-sharp-flash-hack-r3.patch;patch=1 \ + ${TKSRC}/mcp-sa11x0-r0.patch;patch=1 \ + ${TKSRC}/locomo-r0.patch;patch=1 \ +# ${TKSRC}/locomo_spi-4.patch;patch=1 \ + ${TKSRC}/collie-kexec.patch;patch=1 \ + ${TKSRC}/sharpsl_pm-3.patch;patch=1 \ + ${TKSRC}/collie_pm-2.patch;patch=1 \ + ${TKSRC}/locomokeyb_suspendkey-2.patch;patch=1 \ + ${TKSRC}/ucb1x00_suspend.patch;patch=1 \ + ${TKSRC}/collie-ts.patch;patch=1 \ + ${TKSRC}/pcmcia_suspend.patch;patch=1 \ +" + +SRC_URI_append_poodle = "\ + ${RPSRC}/poodle_serial_vcc-r0.patch;patch=1 \ +" + +SRC_URI_append_tosa = "\ + ${CHSRC}/tmio-core-r4.patch;patch=1 \ + file://tmio-tc6393-r8.patch;patch=1 \ + file://tmio-nand-r8.patch;patch=1 \ + ${CHSRC}/tmio-fb-r6.patch;patch=1 \ + file://tmio-fb-r6-fix-r0.patch;patch=1 \ + file://tosa-keyboard-r19.patch;patch=1 \ + ${DOSRC}/tosa-pxaac97-r6.patch;patch=1 \ + file://tosa-pxaac97-r6-fix-r0.patch;patch=1 \ + ${DOSRC}/tosa-tmio-r6.patch;patch=1 \ + file://tosa-power-r18.patch;patch=1 \ + file://tosa-power-r18-fix-r0.patch;patch=1 \ + file://tosa-tmio-lcd-r10.patch;patch=1 \ + file://tosa-tmio-lcd-r10-fix-r0.patch;patch=1 \ + file://tosa-bluetooth-r8.patch;patch=1 \ + file://wm97xx-lg13-r0.patch;patch=1 \ + file://wm97xx-lg13-r0-fix-r0.patch;patch=1 \ + file://wm9712-suspend-cold-res-r2.patch;patch=1 \ + file://sharpsl-pm-postresume-r1.patch;patch=1 \ + file://wm9712-reset-loop-r2.patch;patch=1 \ + file://tosa-lcdnoise-r1.patch;patch=1 \ + file://tosa-lcdnoise-r1-fix-r0.patch;patch=1 \ + file://arm-dma-coherent.patch;patch=1 \ + file://usb-ohci-hooks-r3.patch;patch=1 \ + file://tmio-ohci-r9.patch;patch=1 \ + file://pxa2xx_udc_support_inverse_vbus.patch;patch=1 \ + file://tosa_udc_use_gpio_vbus.patch;patch=1 \ + " +# ${DOSRC}/tosa-asoc-r1.patch;patch=1 " + +SRC_URI_append_htcuniversal ="\ + file://htcuni-acx.patch;patch=1;status=external \ + " + +SRC_URI_append_zylonite ="\ + file://pxa_fb_overlay.patch;patch=1 \ + file://zylonite-boot.patch;patch=1 \ + " + +S = "${WORKDIR}/linux-2.6.24" -- cgit v1.2.3