| Age | Commit message (Collapse) | Author | Files |
|---|
|
If a user uses the -e option and specifies a machine that hasn't been
built or uses the wrong .wks script for the build artifacts pointed to
by the current machine, we should point that out for obvious cases.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since eight unique files import rpm, perform a check at the top level
for the existence of the rpm module print a sensible error message if it
is not. This may be able to be removed if some of the core rpm
dependencies are removed from the mic libs.
Also check for urlgrabber.
This avoids a bracktrace in the event the modules are not installed
which can be very off-putting to would-be users.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If fat16 is specified to the mkpart parted command, parted will
default to setting the lba flag which causes certain EFI firmware
to fail to detect the filesystem. lba shouldn't be necessary for
FAT16 filesystems anyway, explicitly disable it.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make sure they exist - complain if they don't.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic needs to be given one form of build artifacts or another -
complain if the user doesn't do that.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reuses the mic/livecd infrastructure but heavily subclasses and
modifies it to adapt to the special needs of building images from
existing OpenEmbedded build artifacts.
In addition to the OE-specific mic objects and modifications to the
underlying infrastructure, this adds a mechanism to allow OE kickstart
files to be 'canned' and made available to users via the 'wic list
images' command.
Two initial OE kickstart files have been added as canned .wks files:
directdisk, which implements the same thing as the images created by
directdisk.bbclass, and mkefidisk, which can essentially be used as a
replacement for mkefidisk.sh. Of course, since creation of these
images are now driven by .wks files rather than being hard-coded into
class files or scripts, they can be easily modified to generate
different variations on those images. They also don't require root
priveleges, since they don't use mount to create the images. They
don't however write to media like mkefidisk.sh does, but rather create
images that can be written onto media.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the starting point for the implemention described in [YOCTO
3847] which came to the conclusion that it would make sense to use
kickstart syntax to implement image creation in OpenEmbedded. I
subsequently realized that there was an existing tool that already
implemented image creation using kickstart syntax, the Tizen/Meego mic
tool. As such, it made sense to use that as a starting point - this
commit essentially just copies the relevant Python code from the MIC
tool to the scripts/lib dir, where it can be accessed by the
previously created wic tool.
Most of this will be removed or renamed by later commits, since we're
initially focusing on partitioning only. Care should be taken so that
we can easily add back any additional functionality should we decide
later to expand the tool, though (we may also want to contribute our
local changes to the mic tool to the Tizen project if it makes sense,
and therefore should avoid gratuitous changes to the original code if
possible).
Added the /mic subdir from Tizen mic repo as a starting point:
git clone git://review.tizen.org/tools/mic.git
For reference, the top commit:
commit 20164175ddc234a17b8a12c33d04b012347b1530
Author: Gui Chen <gui.chen@intel.com>
Date: Sun Jun 30 22:32:16 2013 -0400
bump up to 0.19.2
Also added the /plugins subdir, moved to under the /mic subdir (to
match the default plugin_dir location in mic.conf.in, which was
renamed to yocto-image.conf (moved and renamed by later patches) and
put into /scripts.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Initial implementation of the 'wic' command.
The 'wic' command generates partitioned images from existing
OpenEmbedded build artifacts. Image generation is driven by
partitioning commands contained in an 'Openembedded kickstart' (.wks)
file specified either directly on the command-line or as one of a
selection of canned .wks files (see 'wic list images'). When applied
to a given set of build artifacts, the result is an image or set of
images that can be directly written onto media and used on a
particular system.
'wic' is based loosely on the 'mic' (Meego Image Creator) framework,
but heavily modified to make direct use of OpenEmbedded build
artifacts instead of package installation and configuration, things
already incorporated int the OE artifacts.
The name 'wic' comes from 'oeic' with the 'oe' diphthong promoted to
the letter 'w', because 'oeic' is impossible to remember or pronounce.
This covers the mechanics of invoking and providing help for the
command and sub-commands; it contains hooks for future commits to
connect with the actual functionality, once implemented.
Help is integrated into the 'wic' command - see that for details on
usage.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It should be possible to generate a disk to a file using a loopback
device with mkefidisk.sh, which is useful for booting simulators. To
make this possible the partitions for the loop back need to work
similarly to the mmc devices. The mkfs.vfat also requires and
additional argument to force it to write to something other then a
real disk.
Example:
qemu-img create -f raw bigdisk 4G
dev=`sudo losetup -f`
sudo losetup $dev bigdisk
mkefidisk.sh $dev tmp-eglibc/deploy/images/qemux86/core-image-minimal-qemux86.hddimg /dev/sda
sudo losetup -d $dev
Note:
Also a bug was fixed in the mkefidisk.sh where if the disk you are
writing to initially has an invalid label the size of the first
partition will be computed incorrectly. For the simulator disk
creation this is generally always the case, but this can happen with
real hardware as well.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The existing -cpu host option caused kernel panics when people attempted to use
the kvm option. After research and discussion, the best options appear to
be the kvm32/kvm64 cpu types so lets use these instead. These resolve
the kernel issues for me.
[YOCTO #3908]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Strings in Python 3, by default, are assumed to contain unicode
characters. In previous versions of python (<3), unicode strings are
explicitly declared with u"abc". If not, than they're automatically
converted to bytes. This doesn't happen anymore in Python 3.
Since we're dealing with binary files, opened in byte mode, make sure
that we explicitly convert all strings to bytes to make both python 2
and 3 happy.
Other changes:
* add a safety check to make sure relocation did not change the file
size;
* a couple of cosmetic changes (wrap long lines so that we don't have
to scroll to reach the end of them);
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want the temporary file to be written in /tmp not the current
directory.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following commit, 6ccd4d6, increased the RAM size for qemu machines
to 256MB due to some smart sanity tests failing on autobuilder because
more memory was needed.
Unfortunately this leads to various, potentially dangerous, issues like
the one observed during sudoku-savant project compilation:
collect: relinking
collect2: error: '_ZNK6sudoku5ClearINS_6SquareEEclERS1_' was assigned to
'board.rpo', but was not defined during recompilation, or vice versa
board.o:(.rodata+0x8): undefined reference to
`sudoku::Clear<sudoku::Square>::operator()(sudoku::Square&) const'
board.o:(.rodata+0x20): undefined reference to
`sudoku::Clear<sudoku::Sequence>::operator()(sudoku::Sequence&) const'
board.o:(.rodata+0x34): undefined reference to `typeinfo for
sudoku::Action<sudoku::Sequence>'
...AND THE LIST CONTINUES...
collect2: error: ld returned 1 exit status
make: *** [sudoku-savant] Error 1
After some tests, I found that the maximum amount of memory needed for
sudoku to compile properly is 146MB(!?!).
My attempts to create a simpler test case (using templates), in order to
replicate and isolate the issue failed. All the tests compiled just
fine.
So, my guess is that this problem is certainly memory related but the
cause might be hidden in any of the following: qemu versatile hw model,
in the kernel or, highly unlikely but not impossible, the toolchain
itself. The reason I don't really think the cause is in the toolchain is
the fact that the compilation completes just fine for 128MB on qemuarm but
also on other qemu machines (with 256MB of memory).
Since this issue might need lots of time to have a proper fix, I'll revert back
to using 128MB for qemuarm for the time being.
[YOCTO #5133]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This has now been superseded by testimage.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
The pkgdata stamps now need to be wiped away if the sysroot is destroyed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
directory
Currently we have a hierarchy of pkgdata directories and the code has to put together
a search path and look through each in turn until it finds the data it needs.
This has lead to a number of hardcoded paths and file globing which
is unpredictable and undesirable. Worse, certain tricks that should be
easy like a GL specific package architecture become problematic with the
curretn search paths.
With the modern sstate code, we can do better and construct a single pkgdata
directory for each machine in just the same way as we do for the sysroot. This
is already tried and well tested. With such a single directory, all the code that
iterated through multiple pkgdata directories and simply be removed and give
a significant simplification of the code. Even existing build directories adapt
to the change well since the package contents doesn't change, just the location
they're installed to and the stamp for them.
The only complication is the we need a different shlibs directory for each
multilib. These are only used by package.bbclass and the simple fix is to
add MLPREFIX to the shlib directory name. This means the multilib packages will
repackage and the sstate checksum will change but an existing build directory
will adapt to the changes safely.
It is close to release however I believe the benefits this patch give us
are worth consideration for inclusion and give us more options for dealing
with problems like the GL one. It also sets the ground work well for
shlibs improvements in 1.6.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows a clean seperation between image outputs from different
machines, and makes it possible to have convenience symlinks to make
the output ready to deploy.
This did require some surgery in runqemu; if explicit paths to the image
and kernel are not supplied then DEPLOY_DIR_IMAGE needs to be determined
from bitbake or set in the environment. However the script does try to
avoid requiring it unless it really is needed. Corresponding changes
were made in the automated testing code as well.
Based on an RFC patch by Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If not every combination of BB_NUMBER_THREADS and PARALLEL_MAKE have
been tested by bb-matrix.sh, e.g., by using BB_RANGE="04 08 10 12 16"
and PM_RANGE="04 08 10 12 16", then the graph that gnuplot generates by
default looks very jagged due to the missing data points. By using
splines to interpolate the missing data the graph looks a lot better.
This should not change graphs where all data points are available in any
way, only improve sparse graphs.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes sure the the first build starts from a clean state. Otherwise
one could have the first build affected by any leftover state from
a previous build.
This also leaves a working state behind after the final build.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the target sysroot of an SDK we can have target system absolute links
which don't make sense. This adds a script which fixes them up to become relative
paths instead.
[YOCTO #5020]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When runqemu tries to determine the MACHINE variable from a
kernel or vmdk filename that doesn't contain any known machine
name, the variable gets set to the filename. It should remain
unset and cause an error.
[YOCTO #2890]
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set memory size to 256M for qemuarm, qemux86, qemux86-64, qemumips,
qemumips64, and qemuppc.
This allows the smart automated tests to run on machines with a GUI
environment (such as Sato) running at the same time, for which 128M is
too limiting. Setting this in runqemu allows users manually using
runqemu to avoid the same out-of-memory issues under similar conditions
using smart, on-target compilation or other uses.
Fixes [YOCTO #5045].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous changes were totally broken as quoting globs doesn't work. Remove
the quotes so the rm commands actually delete the stamps.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids the following new behavior resulting from the create_wrapper
fixes:
llc[11]$ ../poky/scripts/oe-setup-rpmrepo
/usr/bin/env: nativepython: No such file or directory
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The iptables rules for the tap interface are added by runqemu-ifup
everytime we use runqemu to start a qemu target. But it's not cleaned
up when runqemu exits.
This patch cleans up the remaining iptables rules for the tap interface
in runqemu-ifdown.
[YOCTO #5047]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should provide the user more information if a preconfigured tap
is used. This is because the user might have manually set up the tap
interface to be used by other qemu binaries.
So at a minimum, we should let the user know how to make runqemu skip
that tap interface.
[YOCTO #5047]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu-ifup and runqemu-ifdown should be pairs. If we're using a
preconfigured tap interface, the runqemu-ifdown should not be invoked
to bring it down.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Run list-packageconfig-flags.py on wrlinux's platform in which
the oe-core layer and bitbake layer in different directories:
----
../layers/oe-core/scripts/contrib/list-packageconfig-flags.py
Traceback (most recent call last):
File "../layers/oe-core/scripts/contrib/list-packageconfig-flags.py", line 28, in <module>
import bb.cache
ImportError: No module named bb.cache
----
The script import bb module from bitbake lib dir, the previous
lib dir was hardcode and only worked on poky but not for others.
In this situation, look for bitbake/bin dir in PATH could fix this issue.
[YOCTO #5060]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python-multiprocessing
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If runqemu is used without actually building any qemu images (i.e. you
downloaded the images) it's likely that qemu-helper-native hasn't been built.
Instead of just saying what command can't be found, tell the user how to solve
their problem.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Default buildhistory directory to buildhistory/ under the current
directory and require an option to set it
* Show a description in the help output
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Improve command-line argument handling of buildhistory-diff to make it
easier to use.
* Default buildhistory directory to buildhistory/ under the current
directory and require an option to set it (since most users will
likely run buildhistory-diff from the build directory and keep
BUILDHISTORY_DIR at its default location)
* Default from-revision to "build-minus-1" to get the difference from
the previous build with no arguments
* Allow from/to revisions to be specified by from..to (since git accepts
this form).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* usually it's more important to know how much space will each
package take on target device then size of compressed package
* example for libewebkit0 with 4 different architectures, interesting
that om_gta02 .ipk is bigger but it's smaller when installed
before:
MACHINE DEFAULTTUNE SIZE (.ipk file)
om_gta04 cortexa8t-neon 15996 KiB libewebkit0
qemux86_64 x86-64 16992 KiB libewebkit0
spitz xscale 16148 KiB libewebkit0
om_gta02 arm920t 16260 KiB libewebkit0
after:
MACHINE DEFAULTTUNE SIZE (installed)
om_gta04 cortexa8t-neon 60544 KiB libewebkit0
qemux86_64 x86-64 63720 KiB libewebkit0
spitz xscale 60588 KiB libewebkit0
om_gta02 arm920t 56268 KiB libewebkit0
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The QEMUOPTIONS for ISOFS was not complete, leading to failures when
trying to start X in live images.
This patch fixes this problem.
[YOCTO #4103]
[YOCTO #4884]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The previous code used the environment variable BUILDDIR and assumed that TMPDIR
was a subdirectory. This often isn't the case, so instead ask bitbake where the
directories we're about to delete are.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
oe-setup-builddir substitutes ##COREBASE## which seems like it should have the
same value as the variable ${COREBASE}. In reality it doesn't as ##COREBASE##
is substituted with the value of $OEROOT (the location of the oe-init-build-env
script), whereas ${COREBASE} is set by oe-core to the parent directory of meta/.
If oe-core's meta/ isn't a top-level directory then ##COREBASE## and ${COREBASE}
have different values, which can lead to confusion.
To resolve this, deprecate (but still substitute) ##COREBASE## and substitute
##OEROOT# for $OEROOT.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
- This script will list available pkgs which have PACKAGECONFIG flags.
- If option '-f' is used, it will list available PACKAGECONFIG flags
and all affected pkgs.
- If option '-a' is used, it will list all pkgs and PACKAGECONFIG
information
- If option '-p' is used, it means list the pkgs with preferred version
EXAMPLE:
list-packageconfig-flags.py
PACKAGE NAME PACKAGECONFIG FLAGS
==============================================================
alsa-tools-1.0.26.1 defaultval gtk+
avahi-ui-0.6.31 defaultval python
bluez4-4.101 alsa defaultval pie
list-packageconfig-flags.py -f
PACKAGECONFIG FLAG PACKAGE NAMES
====================================
3g connman-1.16
avahi cups-1.6.3 pulseaudio-4.0
beecrypt rpm-5.4.9 rpm-native-5.4.9
list-packageconfig-flags.py -a
==================================================
gtk+-2.24.18
/home/jiahongxu/yocto/poky/meta/recipes-gnome/gtk+/gtk+_2.24.18.bb
PACKAGECONFIG x11
PACKAGECONFIG[x11] --with-x=yes --with-gdktarget=x11,--with-x=no,${X11DEPENDS}
xf86-video-intel-2.21.9
/home/jiahongxu/yocto/poky/meta/recipes-graphics/xorg-driver/xf86-video-intel_2.21.9.bb
PACKAGECONFIG None
PACKAGECONFIG[xvmc] --enable-xvmc,--disable-xvmc,libxvmc
PACKAGECONFIG[sna] --enable-sna,--disable-sna
[YOCTO #4368]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Remove the function keyword.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The middle 'cut' in OECORE_NATIVE_SYSROOT isn't doing anything useful, so
remove it from the pipeline.
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
dependencies
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This script is no longer maintained. Now we don't perform LSB test on
qemu image, so we don't need this script. Most of functions in this
script are implemented in LSB_Test.sh. So it is safe to remove.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Apparently $[...] isn't valid in dash, so use $((...)) instead for
mkefidisk.sh and ddimage that both start with $!/bin/sh.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Add support to boot the 'qemumicroblaze' machine in
qemu-system-microblazeel
* Use the specific machine model for a MicroBlaze system 'petalogix-ml605'
* Use the DTB generated from the kernel build as the DTB for boot
* Force use of initrd rootfs (either in ext or cpio formats)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Add support to boot the 'qemuzynq' machine in qemu-system-arm
* Use the specific machine model for Zynq 'xilinx-zynq-a9'
* Use the DTB generated from the kernel build as the DTB for boot
* Force use of initrd rootfs (either in ext or cpio formats)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Handles qemu instances (launch, kill, restart, serial connection, logging)
Launch is blocking until login prompt and returns to the task. A qemu
serial connection is used to save the boot log and get the ip from the image.
Changed runqemu script not to error out when using custom serial option.
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
|
|
As python-multiprocessing requires python-threading and
python-pickle, this commit adds them as runtime dependency.
The observed behavior was:
When typing 'import multiprocessing' in the python shell on a
minimal image with only the python-multiprocessing recipe installed,
python reports at first:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 65, in <module>
from multiprocessing.util import SUBDEBUG, SUBWARNING
File "/usr/lib/python2.7/multiprocessing/util.py", line 38, in <module>
import threading # we want threading to install it's
ImportError: No module named threading
After adding python-threading as runtime dependency and rebuilding
the image, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 84, in <module>
import _multiprocessing
ImportError: No module named cPickle
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix typo.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This script is sourced so we should return, not exit.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
