| Age | Commit message (Collapse) | Author | Files |
|---|
|
It's logical that you would want to build BBCLASSEXTENDed items
separately through devtool build, so simply allow that - we're just
passing the name verbatim to bitbake, so all it means is adjusting the
validation.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the recipe file itself was created in the workspace, and it uses
BBCLASSEXTEND (e.g. through devtool add --also-native), then we need to
clean the other variants as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're doing this in a couple of places, let's just find the recipe file
if it exists within the workspace (which it will if it's been added
through "devtool add") when we read in the workspace.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes you need to build a variant of a recipe for the build
host as well as for the target (i.e. BBCLASSEXTEND = "native"); add a
--also-native command line option to "recipetool create" that enables
this and plumb it through from an identical option for "devtool add".
(We could conceivably do the same for nativesdk, but I felt it might be
confusing within the context of the extensible SDK, where nativesdk
isn't really relevant to the user.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to run the clean for all recipes that are being reset before we
start deleting things from the workspace; if we don't, recipes providing
dependencies may be missing when we come to clean a recipe later (since
we don't and couldn't practically reset them in dependency order). This
also improves performance since we have the startup startup time for the
clean just once rather than for every recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the recipe name ends with -native then we should inherit native;
likewise if it starts with nativesdk- then inherit nativesdk.
(Note that the recipe name must actually be specified by the user in
order to trigger this - we won't do it based on any name auto-detected
from e.g. the tarball name.)
Since we're doing this based on the name, "devtool add" will also gain
this functionality automatically.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As a matter of general convention we expect recipe names to be lower
case; in fact some of the packaging backends insist upon it. Since in
this part of the code we're auto-determining the name, we should convert
the name to lowercase if it's not already so that we're following
convention and avoiding any validation issues later on.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For debugging purposes it's useful to be able to skip the preparation
step so you can inspect what the state of the build system is first.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Running "raise" with no arguments here is invalid, we're not in
exception handling context. Rather than also adding code to catch the
exception I just moved the check out to the parent function from which
we can just exit.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Clone the correct path - we need .git on the end
* Pull from the specified path instead of expecting a remote to be set
* up in the repo already (it isn't by default)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We read the updateserver setting from the config file but we never
actually used that value - the code then went on to use only the value
supplied on the command line.
Fix courtesy of Dmitry Rozhkov <dmitry.rozhkov@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to call git update-server-info here on the created repository or
we can't share it over plain http as we need to be able to for the
update process to function as currently implemented.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Hooking up a serial console is a "developer mode", the chances are pretty good
developers are interested in watching the kernel boot log on the console so
they can spot any problems or diagnose any failed boots (e.g. can't find root
fs).
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Regardless of which image is built using which layers, try to ensure the image
on the SD device being prepared is the one that is booted automatically when
the board is powered.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* add more php5 entries
* add builder user (from builder.bb)
* add .bashrc and .profile in HOME directory of created user
* add imgdata directory generated by image.py
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add an option for random MACHINE into oe-selftest:
--machine [random/all]
1. random: will set a random MACHINE for each test
2. all: will run tests for all machines
Custom machine sets only weak default values (??=) for MACHINE in machine.inc.
This let test cases that require a specific MACHINE to be able to
override it, using (?= or =).
e.g.:
oe-selftest --run-tests signing --machine random -->
will run all tests switching MACHINE randomly for each test
oe-selftest --run-tests signing --machine all -->
for each machine will run all tests
oe-selftest --run-all-tests --machine random
Also update oeqa/selftest/base.py to accomodate this feature.
Fix for [YOCTO #5880].
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This option will list all available tests in a comprehensive manner.
Fix for [YOCTO #8868]
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
--list-classes does a weak validation when determining test names:
(if method.startswith("test_") which could report any class attribute
that starts with 'test_' as a valid test case.
This fix checks that the class attribute that starts with 'test_'
is also callable (is a method).
Fix for [YOCTO #8862]
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Coverage data tracking initiates too early, causing coverage data from the
oe-selftest environment setting to be added to each run. Even when no tests are run
oe-selftest reports around 24% of coverage due to this extra data.
Change the custom resultclass used by the TextTestRunner to one generated from the
command arguments. The generated class processes coverage when needed, running
coverage setup just before the first testcase is run and reporting after the last
one finished.
[Yocto #8846]
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When a file is given using --sourceparams then wic directly use that file
instead of copying them to build folder. At time of assembling it os.rename
is called which renames all the files to name. In that process the original
file is renamed. When image recipe is rebuilt then wic complains about
missing file which was renamed in previous build.
[YOCTO #8854]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Copied layers with 'cp -a' instead of calling shutil.copytree as
copytree fails to copy broken symlinks.
More pythonic fix would be to use copytree with 'ignore' parameter,
but this could slow down copying complex directory structures.
[YOCTO #8825]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Each time oe-selftest runs, the oe-selftest.log file is overwritten.
This patch solves it by adding time stamp to each selftest log file
and doing a symlink named as oe-selftest.log to the last one created.
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Having fetched the source and unpacked it to a temporary directory, we
then move part of it to the destination directory, or if the source is at
the top level we move the whole temporary directory, but in the latter
case we were later attempting to delete the temporary directory which no
longer existed. Clear out the variable so that doesn't happen.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* tar and binutils we can assume are there
* libsocket is only relevant on BSD systems, so we can ignore it.
* Detect more things implying gettext/intltool is needed
* Detect glib-2.0 requirement.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Much of this was copy/pasted from the extract subcommand code; make it
specific to sync.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We deliberately leave the source tree alone when resetting in case it
contains any work in progress belonging to the user; tell them that
we're doing this so they aren't surprised about it still existing later
on.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a recipe in the workspace actually exists as a file within the
workspace (e.g. after doing "devtool add" or "devtool upgrade") then
show the path to the recipe file on the status line for the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As per the changes to "devtool add", make the source tree path optional
and use the default path if none is specified.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Having to specify -f is a little bit ugly when a URI is distinctive
enough to recognise amongst the other positional parameters, so take it
as an optional positional parameter. -f/--fetch is still supported, but
deprecated.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
recipetool create now has all the logic in it for auto-detecting the
name and version, and using those in the file name - so we can make the
name an optional parameter for devtool add and we pick up the file name
that recipetool has used after the fact.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Assuming we're fetching source remotely (from a URI) we can default the
source tree that will be extracted from it to a "sources" directory
under the workspace in order to save the user specifying it if they
don't have a preferred location.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python's argparse module can't handle when several optional positional
arguments (set with nargs='?') are intermixed with other options. If the
positional arguments aren't optional then this isn't an issue; thus when
changing positional arguments to optional (as we are doing with devtool)
we need this workaround.
This is a pretty horrible hack, but we don't want this flexibility of
ordering to disappear simply because we made some arguments optional.
Unfortunately the corresponding bug remains unresolved upstream even in
Python 3, and argparse is not really designed to be subclassed so it
doesn't make things like this easy.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bbappend already exists at this point, so we know what its path is -
there's no need to figure it out from scratch here.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're repeating this in a couple of places, so we might as well have a
function to do it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a few clarifying words.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add an "edit-recipe" subcommand that runs your default editor (as
specified by the EDITOR environment variable) on the specified recipe in
the workspace. Note that by default the recipe file itself must be in
the workspace - i.e. as a result of "devtool add" or "devtool upgrade";
however there is a -a/--any-recipe option to override this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Often the filename (e.g. source tarball) contains the name and version
of the software it contains.
(This isn't intended to be exhaustive, just to catch the common case.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some build systems (notably autotools) support declaring the name and
version of the program being built; since we need those for the recipe
we can attempt to extract them. It's a little fuzzy as they are often
omitted or may not be appropriately formatted for our purposes, but it
does work on a reasonable number of software packages to be useful.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes we want to force one handler to run before another; if the two
handlers are in different plugins that's difficult without some kind of
priority number, so add one and sort by it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user specifies a URL that just returns a web page, then it's
probably incorrect (or broken); attempt to detect this and show an error
if it's the case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you specify a URL ending in /, BitBake's fetcher returns a localpath
of ${DL_DIR}, and if you then try to unpack that it will attempt to copy
the entire DL_DIR contents to the destination - which at least on my
system filled my entire /tmp. Obviously we should fix the fetcher, but
at least detect and stop that from happening here for now.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If SRC_URI happened not to be in the pre-generated lines then this code
would error out. This is unlikely to happen with the way the create code
is structured at the moment, but handle it just in case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In my testing here it appears make -qn returns an error (exit code 2)
whereas make -n doesn't; I can't immediately tell why based on the
documentation. We don't actually care for it to be quiet since we're
capturing the output, so let's just leave -q off and have this work
properly as a result.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a fetch error occurs, the fetcher already prints a reasonable error -
we don't need the traceback as well, so catch that and exit if it
occurs.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When you grab a URL for a github repository you'll almost certainly find
it in https://github.com/path/to/repository.git format; but bitbake's
fetcher can't handle that because it'll see https:// at the start and
assume it should use wget to fetch it. If the URL starts with http:// or
https:// and the path part ends with .git then assume it's a git
repository and adjust it accordingly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For scripts that use Python's standard argparse module to parse
command-line arguments, create a subclass which will show the usage
the usage information when a command-line parsing error occurs. The most
common case would be when the script is run with no arguments; at least
then the user immediately gets to see what arguments they might need to
pass instead of just an error message.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the SDK update server hasn't been set in the config (when building
the extensible SDK this would be set via SDK_UPDATE_URL) and it wasn't
specified on the command line then we were failing with a traceback
because we didn't pass the default value properly - None is interpreted
as no default, meaning raise an exception if no such option exists.
Additionally we don't need the try...except anymore either because with
a proper default value, NoSectionError is caught as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If no mountpoint is specified for a partition command the partition
will be created but not mounted — mention this in the kickstart
help text.
[YOCTO #8820]
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The script oe-buildenv-internal is called from oe-init-build-env.
Make sure oe-init-buildenv does not return an error if BB_ENV_EXTRAWHITE is
already set, otherwise this will cause oe-init-build-env to fail.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
