| Age | Commit message (Collapse) | Author | Files |
|---|
|
If you want to put the target device back to exactly how it was before
devtool deploy-target started poking things into it, then it would make
things easier if you didn't have to figure out which recipes were
deployed. Now that we have the list stored on the target we can
determine this reliably, so add a -a/--all option to undeploy-target to
undeploy everything that has been deployed.
One of the side-effects of this is that the dry-run functionality for
undeploy-target had to be reimplemented to actually run the script on
the target, since we have no way of knowing what's been deployed from
the host side. We don't need to do the same for deploy-target though
since we know exactly which files will be deployed without referring to
the target.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When running devtool deploy-target, we save a list of deployed files,
and this list is used by devtool undeploy-target (or the next time
deploy-target is run if the list is present, in case any files have been
renamed or deleted since the first time). We were writing this file to
the host, but it makes more sense to write the list to the target
instead, so that if we for example swap in a different board, or switch
hosts, things will work as expected.
In order to do this properly we have to construct a shell script and
ship it over to the target so we can run it. The manifest is written out
to a hidden directory in the root (/.devtool).
Fixes [YOCTO #7908].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Get the default value for updateserver from the configuration file and
show it in the help; also only make the parameter optional if it's
specified. This means we can also drop the check in the function as
argparse will then ensure it's specified if there's no config setting.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a long description used when running --help on the specific command.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Naming these as "optional arguments" is perhaps slightly confusing since
some of the positional arguments might also be optional; in addition
it's rare (though possible) for options to be mandatory - up until
recently we had a recipetool option (-o) that was mandatory. It's not
perfect, but change it to "options" so it's at least a bit more
appropriate.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The listing of subcommands in the --help output for devtool was starting
to get difficult to follow, with commands appearing in no particular
order (due to some being in separate modules and the order of those
modules being parsed). Logically grouping the subcommands as well as
being able to exercise some control over the order of the subcommands
and groups would help, if we do so without losing the dynamic nature of
the list (i.e. that it comes from the plugins). Argparse provides no
built-in way to handle this and really, really makes it a pain to add,
but with some subclassing and hacking it's now possible, and can be
extended by any plugin as desired.
To put a subcommand into a group, all you need to do is specify a group=
parameter in the call to subparsers.add_parser(). you can also specify
an order= parameter to make the subcommand sort higher or lower in the
list (higher order numbers appear first, so use negative numbers to
force items to the end if that's what you want). To add a new group, use
subparsers.add_subparser_group(), supplying the name, description and
optionally an order number for the group itself (again, higher numbers
appear first).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we didn't make any changes to the file then there's no point warning
the user that we have done.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If files had been created next to the recipe (for example devtool add,
edit the source and commit and then devtool update-recipe), running
devtool reset failed to preserve those files and gave an error due
to trying to rmdir the directory containing them which wasn't empty.
Fix the preservation of files in the "attic" directory properly so
we catch anything under the directory for the recipe, and replicate
the same structure in the attic directory rather than slightly
flattening it as we were before.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Looking at Chris Larson's code for starting the user's editor for
"recipetool newappend" it was slightly better than what I wrote for
"devtool edit-recipe" in that it checks VISUAL as well as EDITOR and
defaults to vi if neither are set, so break this out to its own function
and call it from both places. The broken out version passes shell=True
however in case it's a more complicated command rather than just a name
of an executable.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no -N/--name option for devtool, that's a recipetool option -
with devtool you just specify the name as a positional argument.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user specifies --basepath on the commandline, only the directory
specified should be searched for .devtoolbase. Otherwise when --basepath
is a child of the sdk directory, .devtoolbase will always be found and
devtool will only show options meant to be used within an sdk.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have an issue with PAT handling on older processes with limited PAT bits,
see the patch description for the full problem. This replaces the runqemu
workaround with a kernel patch until we can get the kernel trees sorted
out and discuss a proper fix with upstream. It should be safe everywhere
so is applied unconditionally.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Processing of this option was lost during recent change of
wks parsting. It was discovered during the work on booting
wic images under qemu. Now, when -use-uuid is fixed it's
possible to specify root partition by partition uuid.
This will be done in the following commit.
(From OE-Core rev: b4882e0b84d7fd4c85ee95386e94722485eafc2b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Supported providing wic image path to runqemu:
runquemu path/to/<image>-<machine>.wic
[YOCTO #8691]
(From OE-Core rev: 58a3bfb1e4b493200820cdf0bf3fc79e31e792de)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Wic images should be boot as is, without pointing qemu to the kernel
binary. Current code doesn't use kernel, but sets KERNEL variable and
shows kernel path in the console output. This can confuse users.
Changed runqemu and runqemu-internal code to avoid setting KERNEL
variable and show kernel path.
(From OE-Core rev: 474caa7ed5ff05caa5d49d270b283882fa616ed1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Quemu should be able to run wic images this way:
runqemu <machine> <image recipe> wic
Tested with 'runqemu qemux86-64 wic-image-minimal wic'
(From OE-Core rev: 8716be799949cb8bde7fa49cbea61312a3a93bb7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use "out of" rather than "from" in the output.
Signed-off-by: Jan Sarenik <jajomojo@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the upgrade of qemux86 to 4.4.1 we're seeing PAT issues when
starting the X server. We need to fix the problem but the failing
sanity tests mask out other issues and we need a workaround.
Merge this for now until we can figure out the full issue. This is
better than changing the kernel defconfig or reverting to old
kernel versions.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you specify a local directory which happens to be a git repository
with an origin remote (and it is in fact remote), we can use that for
SRC_URI as implemented by OE-Core revision
b143d414846854dc8b3e0a47358daf5646eded38, however we also need to set S
if the recipe is going to be of any use fetching from that SRC_URI
later.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
/git/
When recipetool create is given a URL that starts with http(s):// and
contains /git/, such as the URLs at git.yoctoproject.org, it's fairly safe
to assume it's a git repository and not something that should be fetched
with wget, so rewrite the URL.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When auto-detecting the name for a recipe from the URL, strip off any
parameters (";name=value...") before parsing the URL, otherwise this
just ends up in the recipe name which is undesirable.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix a regression introduced in in OE-Core revision
aedfc5a5db1c4b2b80a36147c9a13b31764d91dd where specifying a local source
tree without specifying a name resulted in a traceback.
Fixes [YOCTO #9086].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's going to be more common for users not to have the prepared source
tree for a recipe already, so the default behaviour ought to be to
extract it for them from the recipe. Change the default to extract
(effectively making the -x option a no-op) and add a --no-extract/-n
option to disable it. Later we can look at trying to be smart and
reusing an existing source tree instead of erroring out if it exists;
for now this is just the default reversal.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Both BitBucket and GitHub provide "release" downloads that unfortunately
don't include the actual project name. For recipetool this means we have
to have special handling for these URLs or else the current code assumes
the name of the project is something like "v0.9.1". Borrow and adapt
some code from autospec to do this, and put it in its own function for
clarity.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CMake supports a find_library() directive to find named libraries, so
detect dependencies from this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When extracting source for a recipe, if there are additional custom
tasks run that make changes to the source, create a commit in the
generated git branch so they are contained. This is particularly
useful for tasks that come before do_patch since otherwise the changes
might get incorporated in the first applied patch, but otherwise it
helps avoid the tree being dirty at any point.
Fixes [YOCTO #7626].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python-xml depends on python-elementtree as the latter just contains a C library
used by the former. However there's no point to this split apart from
increasing the number of packages, so merge -elementtree into python-xml.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Take `pwd` to be <initial-dir>. The %s path is relative to it. The value
of %s is "output_folder/build". The current code works as follows:
Changing directory to %s and finding the sources (after cd'ing) to cpio
with output redirection to %s/initrd.cpio triggers the following error
"Error: exec_cmd: cd output_folder/build/INITRD && find . | cpio -o -H
newc >output_folder/build/initrd.cpio returned '1' instead of 0"
This happens because after the cd, `pwd` is <initial-dir>/%s and by the
redirect we write the result to to <initial-dir>/%s/%s/initrd.cpio which
obviously does not exist.
Fix this by getting the sources with "find %s" instead of "cd && find ."
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Dominique Hunziker <dominique.hunziker@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
.iso image creation fails if during the image creation syslinux
is baked and syslinux-native is not.
Added new check to verify if both syslinux and syslinux-native
are baked and bake them if these are not installed.
Signed-off-by: Mihaly Varga <mihaly.varga@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A kickstart file for non-x86 boards may have no 'bootloader' stanza. It
is the usual case if bootloader is setup using other mechanism than
through wic, and is for instance a part of u-boot configuration. In such
case the 'bootloader' field in the KickStart class will be
uninitialized. Instead of adding an empty bootloader line in every
kickstart file call the bootloader parser with empty argument list to
get defaults namespace.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When used with --verbose, the heading for each task looks like
=== The verbose changes of example.do_do_compile:
This should instead be
=== The verbose changes of example.do_compile:
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When copying the sstate-cache into the extensible SDK, if the source
path had a trailing / and the destination path did not, there would be a
missing / between the path and the subdirectory name, and you'd end up
with subdirectories like "sstate-cacheCentOS-6.7". There are functions
in os.path for this sort of thing so let's just use them and avoid the
problem.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The uninative sysroot is in ${STAGING_DIR}-uninative so delete that alongwith
$STAGING_DIR.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When you need to set EXTRA_OECONF for a recipe, you need to know what
options the configure script actually supports; the configure script
however is only accessible from within a devshell and (at least in the
case of autotooled software fetched from an SCM repository) may not
actually exist until do_configure has run. Thus, provide a "devtool
configure-help" subcommand that runs the configure script for a recipe
with --help and shows you the output through a pager (e.g. less),
prefaced by a header describing the current options being specified.
There is basic support for autotools, cmake and bare configure scripts.
The cmake support is a little hacky since cmake doesn't really have a
concise help option that lists user-defined knobs (without actually
running through the configure process), however that being a design
feature of cmake there's not much I can think of to do about that at
the moment.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we run the tasks required to extract the source for a recipe (e.g.
within "devtool modify" or "devtool extract") if one of those tasks
fails you get a bb.build.FuncFailed exception; handle this properly so
you don't see a traceback.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a recipe generated by "devtool add" has been modified since then when
you run "devtool reset", it will be moved into the "attic" subdirectory
of the workspace in case those modifications need to be preserved. It
seems natural that if those modifications were worth preserving we
should warn the user if such a file exists when they run "devtool add"
to create the same recipe again, so they can pick up where they left off
if they want to.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Provide an option to devtool build-image to specify the list of packages
instead of taking the list of packages produced by recipes in the
workspace. Sometimes you don't want all of these packages; other times
you want to add more.
This is the most immediate fix for [YOCTO #8855], though it is a little
crude so I would like to provide better means of customising the image
contents later.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
standard.py is getting a bit large; move the "utility" commands to
another module.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add simple initial eSDK test. Currently, only download size and
installation time of eSDK is measured. The eSDK to be tested is
generated from the same image that the other tests are run for. This
patch will add two new fields to the global results log and that needs
to be taken into account when examining the results.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make it possible to time also other than bitbake commands. The name of
the log file is changed from bitbake.log to commands.log.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I was a little bit hasty in OE-Core revision
c2cc5abe34169eae92067d97ce1e747e7c1413f5 - it turns out BitBake's
fetcher code is not consistent in whether it logs something useful or
not; when fetching from an http URL it does but with a git repository
it doesn't. In advance of any major reworking of fetch error handling in
BitBake, let's just print the text of the exception and then we know we
have shown something to the user.
Additionally, we were only catching FetchException here but there are
several other classes of exception that the fetcher can raise (e.g.
MalformedUrl); catch the parent BBFetchException class instead so we
avoid tracebacks for those other classes as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the URL ends in a / then we want to strip that off the path we split
out of the URL before calling os.path.basename() on it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you specify a local directory which happens to be a git repository
with an origin remote (and it is in fact remote), we can use that for
SRC_URI rather than leaving it blank in the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
source
Sometimes you don't want to build an entire project, just a subdirectory
of it; add a --src-subdir option to make that easier. (We still look for
a single subdirectory in what gets unpacked, e.g. what you might find
within a tarball, so whatever you specify with this option is added onto
the end of that.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Quoting is optional in CMakeLists.txt and is occasionally used, so strip
out quotes if they are present.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When constructing the sstate-cache directory for the extensible SDK,
we were copying in any matching native sstate packages, and as the
signature doesn't actually change when the distro changes (since
NATIVELSBSTRING is just a path separator for the artifacts and is not
part of the signature) we ended up copying duplicated packages when the
distro changed e.g. upon host distro upgrade. Only search in the
NATIVELSBSTRING-named subdirectory for native packages and the issue
goes away.
Fixes [YOCTO #8885].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
