summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)AuthorFiles
2017-01-31verify-bashisms: point out where to get checkbashisms.plPatrick Ohly1
The current SourceForge project seems to be unmaintained (last release 2.0.0.2 from 2015) while the copy used by Debian is quite active (last commit 2016-09-30). Ideally, checkbashisms.pl should get installed automatically via a recipe, but for now at least provide the link for manual installation. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-31verify-bashisms: fix typoPatrick Ohly1
Variable was renamed, it's now called "output". Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-31runqemu: allow bypassing of network setupJuro Bystricky1
At present it is silently assumed all QEMU machines support networking. As a consequence, one cannot run QEMUs without network emulation using "runqemu". This patch allows bypassing any network setup providing the qemuboot.conf file contains: qb_net = none [YOCTO#10661] Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-31oe-publish-sdk: add pyshtables.py to .gitignoreAndrea Galbusera1
pyshtables.py should be ignored by git as it is generated. If kept in the repo, causes subsequent runs of sdk-update to fail. [ YOCTO #10963 ] Signed-off-by: Andrea Galbusera <gizero@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-31isoimage-isohybrid: renamed variable hdd_dirEd Bartosh1
Renamed variable hdd_dir to deploy_dir as this variable is assigned to the value of DEPLOY_DIR_IMAGE. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-31isoimage-isohybrid: use TRANSLATED_TARGET_ARCH instead of MACHINE_ARCHEd Bartosh1
isoimage-sihybrid plugin uses MACHINE_ARCH to get the name of initrd image. It doesn't work for all machines, for example for quemux86-64 machine MACHINE_ARCH is quemux86_64 and initrd name is core-image-minimal-initramfs-qemux86-64.cpio.gz Used TRANSLATED_TARGET_ARCH variable to get the initrd image name. Replaced MACHINE_ARCH->TRANSLATED_TARGET_ARCH in WICVARS variable to make it available from <image>.env file. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-31wic: Look for image artifacts in a common locationTom Zanussi2
Rather than have each image type look for artifacts in image-specific locations, move towards having them look for artifacts in a common location, in this case DEPLOY_DIR_IMAGE Use the existing deploy.bbclass to have the bootloaders put their binaries in DEPLOY_DIR_IMAGE and then wic will find them and place them in the image Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2017-01-31wic: isoimage-isohybrid: stop using HDDDIREd Bartosh1
Stop using HDDDIR in isoimage-isohybrid wic plugin. This variable is set by hddimg code, which is going to be removed soon. All required artifacts should be available from ISODIR. wic-image.bbclass has been modified to build iso artifacts, so it should be safe to remove usage of HDDDIR. [YOCTO #10835] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-31wic: use INITRD_LIVE in isoimage-isohybridEd Bartosh1
INITRD variable is not set if hddimg is disabled. isoimage-isohybrid can't get correct name for initrd if INITRD variable is not set. Added INITRD_LIVE to WICVARS and used it in isoimage-isohybrid code to get initrd artifact name. Used INITRD if INITRD_LIVE is not set. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-31wic: partitionedfs: set partition name for gpt partitionsJukka Laitinen1
Set proper gpt partition name for the partitions in case given in the configuration Signed-off-by: Jukka Laitinen <jukka.laitinen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-31wic: direct.py: get rid of names with two underscoresEd Bartosh1
Attributes with two leading underscores are mangled in Python and used mainly for avoiding name clashes with names from subclasses. They're not needed in most of wic classes. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-31wic: remove unused API DirectImageCreator.get_disk_namesEd Bartosh1
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-31wic: make workdir a temporary directoryEd Bartosh1
Wic used hardcoded path /var/tmp/wic/ as a work directory, which caused conflicts if two wic instances run in parallel. Made work directory unique and temporary. Moved results from work directory to output directory when they're ready. [YOCTO #10783] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-31wic: get rid of baseimager inheritanceEd Bartosh2
Simplified DirectImageCreator code by removing inheritance from BaseImageCreator. This inheritance doesn't make much sense as DirectImageCreator is the only class that was inherited from BaseImageCreator. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-31wic: change default output directoryEd Bartosh1
Set default output directory to current dir. [YOCTO #10783] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-28scripts/buildstats-diff: simplify timestamp handlingMarkus Lehtonen1
Simply use floats instead of datetime and timedelta objects for handling timestamps. Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-26runqemu: more verbose error message about missing qemuboot.confPatrick Ohly1
When invoking "runqemu" with a mistyped image or architecture name, the resulting error message is about the missing qemuboot.conf, without any indication about the root cause: $ runqemu core-image-mimimal ext4 intel-corei7-64 runqemu - INFO - Assuming MACHINE = intel-corei7-64 runqemu - INFO - Running MACHINE=intel-corei7-64 bitbake -e... runqemu - INFO - MACHINE: intel-corei7-64 runqemu - INFO - DEPLOY_DIR_IMAGE: /fast/build/refkit/intel-corei7-64/tmp-glibc/deploy/images/intel-corei7-64 Traceback (most recent call last): File "/work/openembedded-core/scripts/runqemu", line 1095, in <module> ret = main() File "/work/openembedded-core/scripts/runqemu", line 1082, in main config.read_qemuboot() File "/work/openembedded-core/scripts/runqemu", line 643, in read_qemuboot raise Exception("Failed to find <image>.qemuboot.conf!") Exception: Failed to find <image>.qemuboot.conf! Including the name of the actual file the scripts expects to find plus adding some hints what to check for might help. The error now is: $ runqemu core-image-mimimal ext4 intel-corei7-64 ... Exception: Failed to find <image>.qemuboot.conf = .../tmp-glibc/deploy/images/intel-corei7-64/core-image-mimimal-intel-corei7-64.qemuboot.conf (wrong image name or BSP does not support running under qemu?). The comment about the BSP is included because that would be the real reason why the file might be missing. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-26wipe-sysroot: removeRoss Burton1
This script was useful to delete the sysroot so that future builds happen from a clean sysroot. Now that recipes have their own sysroot this script doesn't need to exist anymore, and if in fact if used will break your TMPDIR. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-23selftest: automatically add the meta-selftest layerBenjamin Esquivel1
adding the meta-selftest layer is a small bump you always encounter when you want to run selftest. Adding an automatic procedure to include the layer if it is not yet present. Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23create-pull-request: fix for OE cgit URL changePaul Eggleton1
The /cgit.cgi/ part is no longer valid in cgit URLs on git.openembedded.org as of recent infrastructure changes. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23devtool: check locale and refuse to start if it isn't UTF-8Paul Eggleton1
We need to ensure the locale is UTF-8 or otherwise strange errors will occur later on during execution - the same reason we check this in BitBake itself. Unfortunately this check has to be before command line parsing and therefore showing the help text in response to --help, since that relies upon parsing bitbake's configuration (as we need to load plugins in other layers). Fixes [YOCTO #10908]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23runqemu: fixes for slirp, network device and hostfwdRobert Yang1
Fixed: - Add QB_NETWORK_DEVICE to set network device, it will be used by both slirp and tap. - Set QB_NETWORK_DEVICE to "-device virtio-net-pci" in qemuboot.bbclass but runqemu will default to "-device e1000" when QB_NETWORK_DEVICE is not set, this is because oe-core's qemu targets support virtio-net-pci, but the one outside of oe-core may not, "-device e1000" is more common. - Set hostfwd by default: 2222 -> 22, 2323 -> 23, and it will choose a usable port when the one like 222 is being used. This can avoid conflicts when multilib slirp qemus are running. We can forward more ports by default if needed, and bsp.conf can custom it. - Use different mac sections for slirp and tap to fix conflicts when running both of them on the same host. [YOCTO #7887] CC: Nathan Rossi <nathan@nathanrossi.com> CC: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-01-23runqemu: support multiple qemus running when nfsRobert Yang2
Fixed: * In build1: $ runqemu nfs qemux86-64 In build2: $ runqemu nfs qemux86-64 It would fail before since the port numerbs and conf files are conflicted, now make runqemu-export-rootfs work together with runqemu to fix the problem. * And we don't need export PSEUDO_LOCALSTATEDIR in runqemu, the runqemu-export-rootfs can handle it well based on NFS_EXPORT_DIR. * Remove "async" option from unfsd to fix warning in syslog: Warning: unknown exports option `async' ignored * Fixed typos Both slirp and tap can work. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-01-23oe-build-perf-test: remove unused imports and fix indentMarkus Lehtonen1
[YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oe-build-perf-test: save test metadata in a separate fileMarkus Lehtonen1
The patch introduces a new metadata (.json or .xml) file in the output directory. All test meta data, e.g. git revision information and tester host information is now stored there. The JSON report format is slightly changed as the metadata is not present in results.json anymore. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23oe-build-perf-test: enable xml reportingMarkus Lehtonen1
Add --xml command line option to oe-build-perf-test script for producing a test report in JUnit XML format instead of JSON. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23testexport.bbclass: Migrate testexport to use new frameworkMariano Lopez1
This migrates current testexport implmentation to use the new OEQA framework. [YOCTO #10686] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23scripts/oe-test: Add new oe-test scriptAníbal Limón1
The new oe-test script will be use to run test components with one single script. The oe-test script search for test components inside meta/lib/oeqa, the test components needs to implement OETestContextExecutor inside context module in order to be supported by oe-test. [YOCTO #10230] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23wic: bootimg-pcbios: use wic-tools targetEd Bartosh1
Used wic-tools target to get location of syslinux. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-23wic: rebuild wic-tools if its sysroot doesn't existEd Bartosh1
Rebuild wic-tools if its native sysroot doesn't exist to ensure that all required tools are available. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-23wic: misc.py: add parameter 'cache' to get_bitbake_varsEd Bartosh1
This parameter will be used to allow or prevent variable caching. For example, we don't want to cache value of RECIPE_SYSROOT_NATIVE wic-tools variable as we may decide to rebuild wic-tools. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-23wic: fixed test_iso_image test caseEd Bartosh1
Fixed isoimage-isohybrid plulgin and correspondent wic tet case: - used wic-tools target when getting varlue of STAGING_LIBDIR variable - ensured that image is built with efi and hddimg enabled Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-23wic: fixed recipe nameEd Bartosh1
Renamed grub-efi-native -> grub-efi in NATIVE_RECIPES dictionary as '-native' suffix is added to the recipe name in the code. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-23partition.py: use FAKEROOTCMD variable to get path to pseudoEd Bartosh1
wic used native sysroot to get path to pseudo utility. This approach doesn't work with recipe specific sysroots. Using FAKEROOTCMD should fix the issue. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-23wic: fix getting path of native sysrootEd Bartosh1
wic used STAGING_DIR_NATIVE variable as a path to native sysroot. This doesn't work with recipe specific sysroots as STAGING_DIR_NATIVE points to the native sysroot of the current recipe. Used RECIPE_SYSROOT_NATIVE variable of wic-tools recipe to fix the issue. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-19oe-selftest: Error if the user has buildhistory enabledRichard Purdie1
buildhistory interfers with various tests so error if the user has it enabled, hence avoiding time spent running the tests only for them to fail. For example, if there is an sstate cache and something comes from that cache, you can get a "version went backwards" warning from buildhistory which would then change the outcome of a test. Its safer/easier to disable it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-19devtool: fix source extraction to work with recipe specific sysrootsPaul Eggleton1
When extracting source for a recipe within devtool (for extract, modify or upgrade) We need to redirect WORKDIR, STAMPS_DIR etc. under a temporary directory so that: (a) we pick up all files that get unpacked to the WORKDIR, and (b) we don't disturb the existing build However, with recipe-specific sysroots the sysroots for the recipe will be prepared under WORKDIR, and if we used the system temporary directory i.e. usually /tmp) as used by mkdtemp by default, then our attempts to hardlink files into the recipe-specific sysroots will fail on systems where /tmp is a different filesystem, and we'd have to fall back to copying the files which is a waste of time. Put the temp directory under the WORKDIR to prevent that from being a problem. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> [RP: Add needed mkdirhier call] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-19oeqa.utils.metadata: allow storing any bitbake config variablesMarkus Lehtonen1
Make it possible to store any bitbake config variables in the metadata. Config values will be stored under a new config element in the xml report: <config> <variable name="MACHINE">qemux86</variable> </config> The value of MACHINE is moved there instead of having a dedicated <machine> element. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-19oeqa.utils.metadata: rename 'revision' to 'commit'Markus Lehtonen1
Revision is a bit vague and could point to a tag, for example. Git commit objects are unambiguous and persistent so be explicit that the element should contain git commit hash. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-19oeqa.utils.metadata: drop 'unknown' git data elementsMarkus Lehtonen1
It's better just to not have the xml elements than to have elements with faux data. One could have git branch named 'unknown', for example. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-19oeqa.utils.metadata: re-organise distro informationMarkus Lehtonen1
Use the same format, based on /etc/os-release, as for host distro information. [YOCTO #10590] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-19runqemu-export-rootfs: fix inconsistent var namesRobert Yang1
Fixed: $ runqemu nfs qemux86-64 [snip] On your target please remember to add the following options for NFS nfsroot=IP_ADDRESS:/path/to/nfsroot,nfsvers=3,port=,mountprog=,nfsprog=,udp,mountport= [snip] Note that the values are null, this is because their var names are inconsistent. [YOCTO #10519] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-19scripts/runqemu: fix checking for <file>.cpio.gzRobert Yang1
When "runqemu /path/to/<file>.cpio.gz", it used the last suffix "gz" as the fstype which was wrong. Check filename against self.fstypes firstly can fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-19wic: partitionedfs: account for non-table partitions when checking if ↵Maciej Borzecki1
logical parititon is needed Commit 8c1c43b7901a9fcd8b279eb4250b08157ad345b7 `wic: Create a logical partition only when it is really mandatory` did not account for partitions that are not present in partition table. Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16scripts: python3 fixes and new tool ksumTom Zanussi2
'ksum.py' generates a combined summary of vmlinux and module sizes for a built kernel, as a quick tool for comparing the overall effects of systemic tinification changes. Execute from the base directory of the kernel build you want to summarize. Setting the 'verbose' flag will display the sizes for each file included in the summary. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16scripts/oe-selftest: fix typoChen Qi1
Change 'agains' to 'against'. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16runqemu: Allow the user to specity no kernel or rootFSAlistair Francis1
In some cirsumstances the user doesn't want to supply a kernel, rootFS or DTB to QEMU. This will occur more now that QEMU supports loading images using a '-device loader' method. Allow users to specify 'none' for QB_DEFAULT_FSTYPE or QB_DEFAULT_KERNEL to avoid supplying these options to QEMU. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16wic: _exec_cmd: produce error if exit code is not 0Ed Bartosh1
Current code doesn't always show error output of the external command and even ignores non-zero exit code. Moved checking of exit code value to the lowest level possible: to _exec_cmd. This should make wic to always check exit code of the external command and issue an error if it's not 0. [YOCTO #10816] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16direct.py: fix getting image nameEd Bartosh1
part.rootfs_dir was used as an image name in the code. However, when multi-rootfs feature is used this attribute points to the name of the rootfs, e.g. if --rootfs command line is rootfs1=core-image-minimal partf.rootfs_dir is 'rootfs1'. The code also fails when image name is not provided in wic commandline. For example, when wic is called with --rootfs-dir=<path> part.rootfs_dir will contain path and wic will crash trying to call bitbake -e <path> to get value of ROOTFS_SIZE variable. Fixed the code by getting image name properly and checking if it's not a path. [YOCTO #10815] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16canned-wks: remove mpc8315e-rdb.wksEd Bartosh1
This file has been moved to meta-yocto-bsp/wic/ Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-26 16:10:15 +0000