| Age | Commit message (Collapse) | Author | Files |
|---|
|
The shell considers empty functions to be a syntax error, so for
template shell functions that contain only comments (or no lines at all)
then add a : to act as a no-op which avoids the syntax error.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we were adding a recipe for software that would typically be built
in the same directory as the source, we were always using a separate
build directory unless the user explicitly specified not to, leading to
errors for software that doesn't expect to be built that way (such as
Python modules using distutils). Split out the code that makes this
determination automatically from the "devtool modify" and "devtool
upgrade" code and re-use that here so the behaviour is consistent.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These functions ostensibly allowed parsing a recipe without bbappends
but this clearly hadn't been tested because a variable was unassigned in
both of them in that case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes, particularly if you extracted the source to /tmp which is on
tmpfs, the external source tree that is being pointed to may no longer
exist when you come to run "devtool build" or "devtool update-recipe"
etc. Make all of the commands that need to check for a recipe being in
the workspace call a single function and have that function additionally
check the source tree still exists where appropriate.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a script to run "devtool modify" followed by a build on every target
recipe in the environment (with the option to skip/resume from/only
include specific recipes). This takes far too long to run as an
oe-selftest test but is still something that is useful to be able to
run. There's also a slightly quicker mode that just runs "devtool
extract" on each recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is not actually used for anything - I thought that we would need to
use it within devtool to set global configuration, but we're able to do
everything we need within the bbappends it creates, which also saves on
parse time. If we're not going to use work-config.inc let's just drop it
completely.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python3-debugger fails to be invoked to debug other scripts complaining about
not being able to import pkutil, this patch adds pkgutil as a dependency for python3-debugger
fixing the issue.
[YOCTO #8334]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python3-debugger (pdb) needs importlib as a dependency, if not included
it produces an error when importing pdb, making pdb unusable, this patch
adds importlib dependency fixing the issue.
{YOCT0 #8333]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Setup the qemumicroblaze machine to use the device tree provided by QEMU
instead of the device tree located in the images directory. Additionally
setup the default memory size to match the QEMU device tree.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch brings the qemu networking setup for qemuzynq and
qemumicroblaze into feature parity with the other qemu machines.
Specifically enabling TAP interface attachcment and kernel command line
IP configuration.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The current default is to use SOCKS4a when socks is specified as
protocol in $ALL_PROXY. However, not all socks servers support
SOCKS4a. By allowing socks4 as an additional protocol, this script
will happily work with SOCKS4 only servers.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Due to an error in the regular expression used to extract a port
number specified in $ALL_PROXY, rather than allowing the port number
to be followed by an optional "/", the port was required to be
followed by "/?".
This corrects the regular expression to allow an optional "/". It also
allows the odd "/?" suffix for backwards compatibility.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Without this fix, if one specified, e.g., 127.0.0.1 in $NO_PROXY, the
oe-git-proxy script would fail with a message like this:
/home/pkj/yocto/poky/scripts/oe-git-proxy: line 64: 32-127.0.0.1: syntax error: invalid arithmetic operator (error token is ".0.0.1")
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It was wrongly assumed that part.size is meagured in Mb. In fact it's
in Kb, so there is no need to convert bitbake variable ROOTFS_SIZE as
it's also in Kb.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
This sub-command creates a bbappend for the specified target and prints the
path to the bbappend. The -w argument, as with some of the other recipetool
commands, will make a version-independent bbappend.
Example usage: recipetool newappend meta-mylayer virtual/kernel
[YOCTO #7964]
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If it is passed only the image parameter, it will show some interactive
options to help to conclude the script.
With this patch it will detect devices available in the machine, asking
to choose what it is wanted to be flashed.
it will suggest the target device. If it is a SD card the suggestion
is /dev/mmcblk0. If it is a pendrive it will suggest to use /dev/sda.
Signed-off-by: Bruno Bottazzini <bruno.bottazzini@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use already existing bb.fetch.decodeurl() for getting the parameters for
a URI. This is more fault tolerant and maintainable.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Giving anything with -image in it as bootparams or in qemuparams (for
example, an additional -drive parameter with an image file or an
"-initrd .../core-image-minimal-initramfs-qemux86.cpio.gz") caused
runqemu to treat these parameters as names of the rootfs image file.
Matching *-image) after checking the current argument for more
specific cases like bootparams and qemuparams avoids this
misinterpretation of the command line parameters.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
At least the OVFM (UEFI Firmware for Qemu and KVM) recipe stores the BIOS
under $OE_TMPDIR/sysroots/$MACHINE, now defined as OECORE_MACHINE_SYSROOT.
The latter is used when searching BIOS, VGA BIOS and keymaps. As a example,
to boot a OVFM BIOS, one can run the following command:
$ runqemu qemux86-64 core-image-minimal \
biosdir=usr/share/ovmf \
biosfilename=bios.bin \
nographic
Note the bios* parameters: these two are needed to specify the subfolder
(parent folder is OECORE_MACHINE_SYSROOT) and BIOS filename (without it,
it picks a BIOS named bios-256k.bin).
[YOCTO #5654]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Given a 'buildstats' path (created by bitbake when setting
USER_CLASSES ?= "buildstats" on local.conf) and task names, outputs
'<task> <recipe> <elapsed time>' for all recipes. Elapsed times are in
seconds, and task should be given without the 'do_' prefix.
Some useful pipelines
1. Tasks with largest elapsed times
$ buildstats.sh -b <buildstats> | sort -k3 -n -r | head
do_compile perl-5.20.0-r1 221.82
do_configure gettext-native-0.19.4-r0 140.34
do_compile openssl-native-1.0.2a-r0 107.48
do_compile openssl-1.0.2a-r0 102.10
do_configure perl-native-5.20.0-r0 90.70
do_configure gettext-0.19.4-r0 88.17
do_compile gcc-cross-i586-4.9.2-r0 83.98
do_configure m4-native-1.4.17-r0 83.44
do_compile qemu-native-2.2.0-r1 71.69
do_compile glibc-2.21-r0 60.88
2. Min, max, sum per task
$ buildstats.sh | datamash -t' ' -g1 min 3 max 3 sum 3 | sort -k4 -n -r
do_configure 0.03 140.34 1968.66
do_compile 0.01 221.82 1664.44
do_install 0.03 40.31 330.45
do_populate_sysroot 0.11 34.45 229.23
do_unpack 0.01 36.1 193.54
do_patch 0.01 9.2 62.07
do_fetch 0.01 6.66 32.13
do_populate_lic 0.09 1.65 30.7
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
So far all devtool and recipetool plugins were expected
to have plugin_init function. This function is empty in
most of plugins as they don't require initialisation.
Making plugin_init optional would allow not having empty
plugin_init in every plugin.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Makes more sense to have this fix after checking BUILDDIR exists, is
a directory and is writable.
[YOCTO #7669]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes the following error when running devtool from a directory other
than the build directory (or the SDK base path when using within the
extensible SDK):
The BBPATH variable is not set and bitbake did not find a
conf/bblayers.conf file in the expected location.
Maybe you accidentally invoked bitbake from the wrong directory?
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enables creating packages using devtool within the extensible SDK. (This
is only enabled within the extensible SDK because it provides no
advantage over just running bitbake directly there).
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a recipe has been added to the workspace via "devtool add"
or "devtool upgrade" then the recipe file itself will be in the
workspace layer; if you run "devtool update-recipe" particularly in the
upgrade case you might think it would apply the upgrade to the original
recipe, but it will not - in order to remain consistent it has to update
the recipe that's in use which is the one in the workspace. Warn the
user in this situation so that they know what they need to do when they
are finished.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enhance the logic behind the 'auto' mode a bit by only updating the
SRCREV if the changes are already found upstream. The logic is simple:
update SRCREV only if the current local HEAD commit is found in the
remote branch (i.e. 'origin/<branch_name>'). Otherwise resort to
patching.
This affects a couple of the oe-selftest tests so update those as well.
[YOCTO #7907]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Through -s/--disable-parallel-make, the user can turn off parallelism
on the make tool. This can be useful when debuging race condition issues.
In order to set PARALLEL_MAKE = "" a post-config file created and then
passed into the build.
[YOCTO #7589]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intention is to have a single file for each devtool feature
so devtool can grow in a modular way. In this direction, this patch creates
build.py, moving all related build features from standard.py to build.py.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrades a recipe to a particular version and downloads the source code
into a folder. User can avoid patching the source code.
These are the general steps of the upgrade function:
- Extract current recipe source code into srctree and create a branch
- Extract upgrade recipe source code into srctree and rebase with
previous branch. In case the rebase is not correctly applied, source
code will not be deleted, so user correct the patches
- Creates the new recipe under the workspace
[YOCTO #7642]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the _add_md5() function to be called with a directory in order to
recursively add the files under it. Additionally, we need to skip
preserving empty directories (since directories aren't listed in the md5
file).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This will now also be used by "devtool upgrade".
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not put 'do_shared_workdir' into SRCTREECOVEREDTASKS when creating
bbappend for kernel packages. This will allow building packages that
depend on the shared build artifacts of kernel.
[YOCTO #6658]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Wic uses bitbake variable ROOTFS_SIZE to set correspondent
partition size. This variable is a literal representing
float value. Wic crashes trying to convert it to int with
the error: invalid literal for int() with base 10: '10166.0'
Fixed this by converting variable to float and rounding result.
This should work for int and float literals.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable updating the installed extensible SDK from a local or remote
server, avoiding the need to install it again from scratch when
updating. (This assumes that the updated SDK has been built and then
published somewhere using the oe-publish-sdk script beforehand.)
This plugin is only enabled when devtool is used within the extensible
SDK since it doesn't make sense to use it next to a normal install of
the build system.
E.g.
devtool sdk-update /mnt/sdk-repo/
devtool sdk-update http://mysdkhost/sdk
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a script to publish an extensible SDK that has previously been built
to a specified destination. This published SDK is intended to be
accessed by the devtool sdk-update command from an installed copy of the
extensible SDK.
e.g.
oe-publish-sdk <ext-sdk> <destination>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* trying to pass foo="a b" through postinst_intercept ends
with the actual script header to containing:
b
foo=a
which fails because "b" command doesn't exist.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes it possible to boot images with multiple partitions (the
ones ending in .hddimg or .hdddirect) in several ways:
runqemu qemux86 core-image-minimal hddimg
runqemu tmp/deploy/images/qemux86/core-image-minimal-qemux86.hddimg
VM=tmp-glibc/deploy/images/qemux86/iot-os-image-qemux86.hddimg FSTYPE=hddimg runqemu
Same for hdddirect.
This is useful for testing initramfs scripts, secure boot (when
switching to UEFI), or boot loaders like syslinux. For testing the
content of the rootfs, the ext4 image is better because that approach
is faster (no need to create another large image during build, rootfs
can be read directly instead of reading boot.img through loop device).
When booting a live image, the kernel, initramfs (if any) and kernel
parameters are taken from the image by the virtual machine's BIOS, so any
additional kernel parameters given to runqemu are ignored. This can be
avoided (already without this change) in a slightly hacky runqemu setup:
ROOTFS=tmp/deploy/images/qemux86/core-image-minimal-qemux86.hddimg \
FSTYPE=ext4 \
KERNEL=tmp/deploy/images/qemux86/bzImage-initramfs-qemux86.bin \
MACHINE=qemux86 \
runqemu serial kvm nographic 'bootparams=root=/dev/ram0'
The additional bzImage-initramfs-qemux86.bin kernel here was created
by adding this to local.conf:
INITRAMFS_IMAGE = "core-image-minimal-initramfs"
INITRAMFS_IMAGE_BUNDLE = "1"
In the code, the new FSTYPE=hddimg resp. hdddirect behaves almost
exactly like the older vmdk FSTYPE. New types were chosen because it
seemed cleaner than using FSTYPE=vmdk when the actual image pointed to
by VM is not in that format. The downside is that several checks for
FSTYPE=vmdk had to be duplicated for FSTYPE=hddimg.
The VM variable now gets interpreted as "virtual machine disk image"
instead of "vmdk image".
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The kernel package needs "kern-tools-native" in order for it's
do_kernel_metadata. Thus, devtool extract for kernel in a pristine
environment fails. With the current bb.tinfoil implementation it is not
possible to run arbitrary bitbake commands - e.g. run
"bitbake kern-tools-native -c populate_sysroot" in our case. This patch
implements an ugly workaround for that problem, basically by hardcoding
this dependency and running the required bitbake task(s) before tinfoil
is initialized.
[YOCTO #6658]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Change handling of kernel packages so that the "initial rev" is parsed
correctly. Also, the devtool-specific git tags (devtool-base and
devtoo-patched) are now generated for kernel packages as well.
[YOCTO #6658]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Set SRCTREECOVEREDTASKS appropriately in the workspace .bbappend file
for kernel recipes. This tries to ensure that all needed tasks (esp.
configure and patch) are run when building the kernel - tasks which
would normally be disabled by externalsrc.bbclass.
[YOCTO #6658]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Removing recursive option from chmod -st on BUILDDIR as it would
take very long on existing build directories
[YOCTO 7669]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Made short variable names longer and more readable.
Fixed pylint warnings "Invalid variable name" and
"Invalid argument name".
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Functionality of listing and using properties of wic images
does not exist in the wic code. However, there are plenty of
help and usage content about it, which is very confusing.
Removed everything regarding image properties from wic codebase.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Renamed variables named as Python builtin functions.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed or reworked code with unused variables.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed pylint warning:
Instance of 'ConfigMgr' has no 'create' member (no-member)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cmdln.py https://pypi.python.org/pypi/cmdln was used in
creator.py to parse image plugin options and arguments.
There is no need in such a sofisticated API to do this
simple task. Standard option parser optparse.OptionParser
can do it just fine.
Modified Creator class to work with option parser.
Removed cmdln.py from the wic codebase.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed pylint warning:
More than one statement on a single line (multiple-statements)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used explicit imports in partitions.py and wicboot.py
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
