summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)AuthorFiles
2011-07-27multilib_header.bbclass: Add oe_multilib_header wrapperMark Hatle1
This helper function and associated header will allow us to resolve two/three header files that conflict due to contents that change based on wordsize and ABI. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-07-27scripts/combo-layer: keep carriage returns at the end of linesPaul Eggleton1
Use --keep-cr option to "git am" or otherwise we lose carriage returns which can be important for patches against files that use CRs. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2011-07-25runqemu: report error if TMPDIR cannot be determinedScott Garman1
Invoking runqemu outside of the build directory for an in-tree setup results in an empty TMPDIR because bitbake -e cannot be run to find it. A symptom of this problem is running runqemu and getting the following error: Error: Unable to find tunctl binary in <directory> Catch this case and report the error to the user. This fixes [YOCTO #1278] Signed-off-by: Scott Garman <scott.a.garman@intel.com>
2011-07-20scripts/contrib: add build time regression test scriptPaul Eggleton2
test_build_time.sh is a bash script intended to be used in conjunction with "git bisect run" in order to find regressions in build time, however it can also be used independently. It cleans out the build output directories, runs a specified worker script (an example is test_build_time_worker.sh) under TIME(1), logs the results, and returns a value telling "git bisect run" whether the build time is good (under the specified threshold) or bad (over it). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2011-07-19oe-buildenv-internal: Replace POKYMODE POKYLIBC with TCMODE and TCLIBCKhem Raj1
These are new variable names in oe-core Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-07-19send-pull-request: default to --supress-cc=allDarren Hart1
Unless the user specifies -c, don't pull in any email addresses from the patches in the series. This avoids having to remove the email addresses from patches being pulled in from upstream. If you want the email addresses on the patch to be added, continue to use the -c option as before. Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2011-07-19scripts/hob: wrapper script to run hob gui with a UI specific config fileJoshua Lock1
This ensures any configuration changes made in the GUI are only set when using hob. The default hob.local.conf is generated with a line which adds image_types to INHERITS so that the GUI can introspect the available FSTYPES. Signed-off-by: Joshua Lock <josh@linux.intel.com>
2011-07-14bb-matrix: correct BB and PM number canonicalizationDarren Hart1
The bash string operation ${BB##*0} was greedy and in addition to converting "02" to "2", also converted "20" to "", causing all builds for a BB value ending in 0 to run with BB_NUMBER_THREADS=1. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-07-14scripts: Rename "adt-install" to "adt-installer" in user help.Robert P. J. Day1
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-07-12bb-matrix: initial scripts to record TIME(1) metrics for BB and PM combinationsDarren Hart2
The bb-matrix.sh script will run a bitbake command, building core-image-minimal by default, for various combinations of BB_NUMBER_THREADS and PARALLEL_MAKE. It records all relevant metrics of the TIME(1) command for each combination in a data file. The bb-matrix-plot.sh script can be used to visualize each of these metrics via a 3d surface plot, either solid surface or wireframe with a value-map projection on the XY plane. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-07-08combo-layer-tool: add tool to manipulate combo layersYu Ke3
This patch adds the script "combo-layer" to manipulate combo layer repos. A combo layer repo is a repo containing multiple component repos, e.g. oe-core, bitbake, BSP repos. The combo layer repo needs to be updated by syncing with the component repo upstream. This script is written to assist the combo layer handling. The combo layer tool provides three functionalities: - init: when the combo layer repo and component repo does not exist, init will "git init" the combo layer repo, and also "git clone" the component repos - update: combo layer tool will pull the latest commit from component repo upstream, and apply the commits since last update commit to the combo repo. If the user specifies interactive mode(--interactive), they can edit the patch list to select which commits to apply. - splitpatch: split the combo repo commit into separate patches per component repo, to facilitate upstream submission. Combo layer tool uses a config file to define the component repo info. Please check the combo-layer.conf.example for a detailed explanation of the config file fields. Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2011-06-30scripts/runqemu: enable btrfsNitin A Kamble2
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2011-06-29scripts/oe-setup-builddir: Fix Yocto documentation links and add a couple of ↵Richard Purdie1
other example targets This takes into account some feedback from Yocto's tech writer as mentioned in the bugzilla. [YOCTO #1182] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-06-28Add PARALLEL_MAKE to BB_ENV_EXTRAWHITEDarren Hart1
As BB_NUMBER_THREADS is already whitelisted, it is consistent to also allow PARALLEL_MAKE to be overridden via the environment. This also simplifies performance testing where multiple combinations of those two variables are a natural thing to do. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-06-28bitbake wrapper: exit if python v3 is detectedScott Garman1
Make sure we're not using python v3.x. This check can't go into sanity.bbclass because bitbake's source code doesn't even pass parsing stage when used with python v3, so we catch it here so we can offer a meaningful error message. This fixes bug [YOCTO #1128] Signed-off-by: Scott Garman <scott.a.garman@intel.com>
2011-06-24qemuimagetest: update cvs and iptables to newer version for toolchain testJiajun Xu2
The old versions of cvs and iptables may meet compile error under some architecture - cvs 1.11.23 fails on x86-64 host and iptables 1.4.9 fails on arm host. Update them to latest version could solve these build error. Meanwhile, 240s timeout is set for sudoku becasue 120s is not enough to finish compile. Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
2011-06-23native.bbclass: Add a simple chown intercept commandMark Hatle1
During native recipe processing we want to intercept any calls to chown and do nothing. This prevents errors and allows the same recipes to be used for both native and target recipes. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-06-23python: Switch to using the default -dbg packageMark Hatle1
Python was missing a lot of debug information. Switch to use the default -dbg package. Also add some additional debug information to the -dbg package. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-06-14runqemu: take TMPDIR from bitbakeAnders Darander1
The old standard of using /home/anders/openembedded-core/build/tmp as TMPDIR do not work any longer, as - is appended to the real TMPDIR. Thus, always take TMPDIR from bitbake, unless TMPDIR is set in the environment. Signed-off-by: Anders Darander <anders@chargestorm.se>
2011-06-09scripts/bitbake: Only build tar-replacement-native when the build system tar ↵Richard Purdie1
version < 1.24 Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-06-09create-pull-request: Add URL documentationMark Hatle1
If we can't find the URL, tell the user how to correct the issue. Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2011-06-02send-pull-request: fix a small typo that fails the scriptDexuan Cui1
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
2011-06-01create-pull-request: allow '+' in git PROTO_RE, ie for 'git+ssh://'Martin Jansa1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-05-23create-pull-request: generalize the repository URL parsingDarren Hart1
The existing REMOTE_URL and REMOTE_REPO parsing made assumptions regarding the git URL format used for the known repository types. In fact, both of these ssh URL formats are valid for all the known repositories. Specifically: ssh://git@server/repository/path git@server:repository/path Generalize the parsing to work with each of these for all push URLs matching *@*. Tested with the following URLs: ssh://git@git.pokylinux.org/poky-contrib ssh://git@git.pokylinux.org/poky-contrib.git git@git.pokylinux.org:poky-contrib git@git.pokylinux.org:poky-contrib.git Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2011-05-23send-pull-request: drop sendemail checksOtavio Salvador1
git send-email has the correct check on it. Basically the From is taken from the git 'user' and 'email' config values and in case 'sendemail.smtpserver' is not provided it defaults to use local sendmail command. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Darren Hart <dvhart@linux.intel.com>
2011-05-19*pull-request: add copyright, license, and descriptionsDarren Hart2
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-19send-pull-request: streamline git-send-email usageDarren Hart1
The script was sending one patch at a time, which defeats the internal confirmation mechanism of git-send-email (which would otherwise allow the user to send all patches or abort immediately). Rework the sending logic to use no more than two commands. Use two commands when the cover letter is to be sent to all recipients with the -a argument. Otherwise, send all patches via the same command. The script duplicates git's send confirmation, eliminate that. Reported-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Joshua Lock <josh@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Khem Raj <raj.khem@gmail.com> Cc: Joshua Lock <josh@linux.intel.com> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-19create-pull-request: add untested oe repository supportDarren Hart1
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-19create-pull-request: add GitHub remote supportOtavio Salvador1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2011-05-19create-pull-request: do not check certificateOtavio Salvador1
Some remotes can use HTTPS and we don't need to check the certificate of the host so wget call is changed to avoid it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2011-05-19send-pull-request: verify git sendemail configDarren Hart1
Perform a quick sanity check to be able to direct users to configure git.sendemail if they haven't yet. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-19send-pull-request: don't send all patches to everyone even with -aDarren Hart1
Rather than sending every patch to every recipient of the entire series when -a is used, only send the cover letter to everyone and use git's --signed-off-by-cc feature to generate an auto cc list for the individual patches. Add a -c option to use --signed-off-by-cc to auto cc recipeients at the individual patch level. This is implied by -a. Using git to harvest the Cc list means only collecting Signed-off-by and Cc lines, rather than the more generic *-by lines previously. This is a fair trade-off for significantly reduced complexity. If users want to add Acked-by and Tested-by lines and want to use the -a feature, they should include those recipients as Cc lines as well. Now that we rely on git for auto-cc for the individual patches, make sure the user is prompted before sending each patch by forcing --confirm=always. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Khem Raj <raj.khem@gmail.com> Cc: Koen Kooi <koen@dominion.thruhere.net> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-19send-pull-request: fix greedy auto-cc regexDarren Hart1
A greedy regular expression caused emails to be harvested from patches that were quoted in the commit message. Ensure only tags that start at the beginning of the line are considered for harvesting. NOTE: users are still responsible for verifying the recipients list and to ensure they do not spam people! Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Saul Wold <sgw@linux.intel.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-19send-pull-request: remove local mta supportDarren Hart1
There is no real value in supporting sendmail directly when git can be configured to use it. The script used to generate the pull request mails relies heavily on git, so doing so here does not impose any additional dependencies and it greatly reduces the complexity of this script. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-19send-pull-request: whitespace cleanupDarren Hart1
Indent with tabs, not spaces, for consistency with other bash scripts. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-19create-pull-request: provide an RFC mode via -c argumentDarren Hart1
Currently it is difficult to know if a pull request is being sent for review or just to be pulled. Add a -c argument to add RFC to the subject prefix and a blurb requesting review to the cover letter. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Joshua Lock <josh@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Saul Wold <sgw@linux.intel.com> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Joshua Lock <josh@linux.intel.com> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-19create-pull-request: rewrite known private URLs to public URLsDarren Hart1
Rather than requiring users to have public remotes and private remotes when their development remotes are ssh based (and therefor unsuitable for a pull request URL), rewrite the ones we know about from ssh://git@ to git://. As the remote url vary from remote to remote, do the REMOTE_REPO regex per remote. With this infrastructure in place, future patches can augment the list of known remotes for things like Git Hub, Gitorious, kernel.org, etc. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Joshua Lock <josh@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Tom Rini <tom_rini@mentor.com> Cc: Tom Rini <tom_rini@mentor.com> Cc: Martin Jansa <martin.jansa@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Joshua Lock <josh@linux.intel.com>
2011-05-19create-pull-request: use git request-pull and arbitrary remotesDarren Hart1
Allow for arbitrary remotes via a new -u argument. Remove the hard coded references to the pokylinux repositories. Create the WEB_URL from known remotes. Future patches can add additional WEB_URL mappings for remotes like Git Hub, Gitorious, and kernel.org. Rather than duplicating the git request-pull command ourselves, just use the existing one. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Joshua Lock <josh@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Tom Rini <tom_rini@mentor.com> Cc: Tom Rini <tom_rini@mentor.com> Cc: Martin Jansa <martin.jansa@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Joshua Lock <josh@linux.intel.com>
2011-05-19create-pull-request: whitespace cleanupDarren Hart1
Indent with tabs, not spaces, to be consistent with other bash scripts. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-19create-pull-request: alphabetize argumentsDarren Hart1
Some initial cleanup prior to a significant overhaul. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Otavio Salvador <otavio@ossystems.com.br>
2011-05-18scripts/oe-buildenv-internal: Improve message when bitbake is missingRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-05-16scripts/oe-setup-builddir: Add missing .sample extensions and default to ↵Richard Purdie1
meta/conf for sample files Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-05-10scripts/oe-setup-builddir: fix typoOtavio Salvador1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2011-05-10qemu-script: Fix qemu seg fault if install Nvidia proprietary driver.Zhai Edwin1
This fix works on Ubuntu, and other distro can add its own path of Mesa's libGL Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
2011-05-04qemuimagetest: Add executable permission to test scripts for toolchainJiajun Xu3
The file mode bits of toolchain test scripts is 644, which could not be executed by user. Fix the issue by adding executable permission(755) to all test scripts for toolchain test. Signed-off-by Jiajun Xu <jiajun.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-05-04qemuimagetest: Enable toolchain automation tests in qemuimagetestJiajun Xu9
Enable toolchain automation tests in qemuimagetest framework. 3 C/C++ test projects are added to test toolchain - cvs, iptables and sudoku-savant. User needs to set TEST_SCEN to "toolchain" in local.conf to enable tests. Test case will check if toolchain tarball exists under "${DEPLOY_DIR}/sdk". And it will extract toolchain tarball into /opt. It requires user to chown /opt to non-root user, who will run qemuimagetest. Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
2011-05-04create-lsb-iamge:Fix bugsXiaofeng Yan1
Change variables "${ARCH}" to "${1}" Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
2011-04-24create-lsb-image:Rename creat-lsb-image and fix some bugsXiaofeng Yan2
Rename creat-lsb-image to create-lsb-image Fix some fuctions for more practical
2011-04-21Further cleanup of various poky referencesRichard Purdie11
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-04-21scripts/runqemu.README: Clean this up to accurately reflect what the runqemu ↵Richard Purdie1
command now does Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 19:37:11 +0000