| Age | Commit message (Collapse) | Author | Files |
|---|
|
Allow access to the snapshot option of qemu to simplify some of our runtime
testing to avoid copying images.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have problems where systems simply stop booting and hang. This is due
to a lack of entropy which means ssh keys and networking can't be brought
up. Adding in the virtio-rng passthrough support allows host entropy to
pass into the guess and avoids these hangs.
This is particularly problematic after the gnutls upgrade which starts
using /dev/random instead of /dev/urandom but was an issue we'd occasionally
seem before that.
It particualrly affected x86 and ppc machines for some reason.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current qemu instances all share the same MAC address. This shouldn't be an
issue as they are all on separate network interfaces, however on the slight
chance this is causing problems, its easy enough to ensure we use unique
MAC addresses based on the IP numbers we assign.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
testimage.bbclass uses runqemu to execute runtime tests on a qemu
target, this means that bitbake is already running and `bitbake -e`
can't be called to obtain bitbake variables.
runqemu tries to work around being unable to read values for
bitbake variables by inferring the MACHINE from the
DEPLOY_DIR_IMAGE setting, however if a user sets that variable in
a manner which doesn't follow the systems expectations (i.e. if
running `bitbake -c testimage` against a directory of pre-generated
images in a user-specified path) the inferring of the MACHINE name
from the DEPLOY_DIR_IMAGE location will fail.
It's possible that check_arg_machine() shouldn't cause runqemu to
fail and that runqemu should proceed with the user-supplied value
even if it can't be verified. This patch simply ensures that a
workflow where the user sets DEPLOY_DIR_IMAGE continues to work
without changing too much of the runqemu code.
[YOCTO #10238]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When runqemu is invoked from a running bitbake instance it will be
unable to call `bitbake -e` due to the lock held by the calling
bitbake instance.
Our test code sets an OE_TMPDIR environment variable from which we
can infer/guess paths. Add code to do so when self.bitbake_e can't
be set, much as the sh version of runqemu did.
[YOCTO #10240]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the STAGING_*_NATIVE directories from the config file don't exist
and we're in a sourced OE build directory try to extract the paths
from `bitbake -e`
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When runqemu is started with a *.qemuboot.conf arg assume that image
artefacts are relative to that file, rather than in whatever
directory the DEPLOY_DIR_IMAGE variable in the conf file points to.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, runqemu had hard coded machine knowledge, which limited its
usage, for example, qemu can boot genericx86, but runqemu can't, we need
edit runqemu/runqemu-internal a lot if we want to boot genericx86.
Now bsp conf files can set vars to make it can be boot by runqemu, and
qemuboot.bbclass will save these info to DEPLOY_DIR_IMAGE/qemuboot.conf.
Please see qemuboot.bbclass' comments on how to set the vars.
* Re-write it in python3, which can reduce lines from 1239 to about 750
lines
* All the machine knowledges are gone
* All of the TUN_ARCH knowledge are gone
* All the previous options are preserved, and there is a new way to run
runqemu: (it doesn't need run "bitake -e" in such a case)
$ runqemu tmp/deploy/images/qemux86
or:
$ runqemu tmp/deploy/images/qemuarm/<image>.ext4
or:
$ runqemu tmp/deploy/images/qemuarm/qemuboot.conf
* Fixed audio support, not limited on x86 or x86_64
* Fix SLIRP mode, add help message, avoid mixing with tap
* Fix NFS boot, it will extract <image>.tar.bz2 or tar.gz to
DEPLOY_DIR_IMAGE/<image>-nfsroot when no NFS_DIR, and remove it after
stop.
* More bsps can be boot, such as genericx86 and genericx86-64.
* The patch for qemuzynq, qemuzynqmp, qemumicroblaze has been sent to
meta-xilinx' mailing list.
* I can't find any qemush4 bsp or how to build it, so it is not
considered atm.
[YOCTO #1018]
[YOCTO #4827]
[YOCTO #7459]
[YOCTO #7887]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we output extra blank lines (because of some automated editing) then
it makes the output recipe look a bit untidy. You could argue that we
should simply have the editing code not do that, but sometimes we don't
have enough context there for that to be practical. It's simple enough
to just filter out the extra blank lines when writing the file, so just
do it that way.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If you have your own node.js application you may not publish it (or at
least not immediately) in an npm registry - it might just be in a
repository on github or on your local machine. Add support to recipetool
create for creating recipes to build such applications - extract their
dependencies, fetch them, and add corresponding npm:// URLs to SRC_URI,
and ensure that LICENSE / LIC_FILES_CHKSUM are updated to match. For
example, you can now run:
recipetool create https://github.com/diversario/node-ssdp
(I had to borrow some code from bitbake/lib/bb/fetch2/npm.py to
implement this functionality; this should be refactored out but now
isn't the time to do that refactoring.)
Part of the fix for [YOCTO #9537].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If you make adjustments to the source tree (as create_npm.py will be)
then you will need to re-run the license variable handling code at the
end so that we get all of the files that should go into
LIC_FILES_CHKSUM if nothing else. Split out the license variable
handling to a separate function in order to allow this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
For debugging it's useful to be able to tell recipetool to keep the
temporary directory.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Ensure we fetch submodules and set SRC_URI correctly when pointing to a
git repository that contains submodules.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
When trying to map python module dependencies to the packages that
provide them, if we're looking for .so files that satisfy
dependencies then we need to exclude files found under the .debug
directory, otherwise the dependency will get mapped to the python-dbg
package which isn't correct.
For example, this fixes creating a recipe for pyserial and not getting
python-fcntl in RDEPENDS_${PN}, leading to errors when trying to use the
serial module on the target.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If AX_PKG_SWIG is found in configure.ac, then what's being looked for is
the swig binary, not swig for the target - so fix the dependency
accordingly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
It's rare but there are recipes that have individual files (as opposed
to archives) in SRC_URI using subdir= to put them under the source tree,
the examples in OE-Core being bzip2 and openssl. This broke devtool
update-recipe (and devtool finish) because the file wasn't unpacked into
the oe-local-files directory and thus when it came time to update the
recipe, the file was assumed to have been deleted by the user and thus
the file was erroneously removed. Add logic to handle these properly so
that this doesn't happen.
(We still have another potential problem in that these files become part
of the initial commit from upstream, which could be confusing because
they didn't come from there - but that's a separate issue and not one
that is trivially solved.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
The --log-file command line argument was slightly broken as {out_dir}
string replacement was not working as expected.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Not specifying -C caused oe-build-perf-test to try to commit results to
the build directory.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should always shut down tinfoil when we're finished with it, either
by explicitly calling the shutdown() method or by using it as a
context manager ("with ...").
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The multiconfig changes altered some of the functions being called here,
so update the calls. Make use of the new Tinfoil.parse_recipe_file()
function to make parsing easier.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using PATCHTOOL = "git", the user of the system is not really the
committer - it's the build system itself. Thus, specify "dummy" values
for username and email instead of using the user's configured values.
Various parts of the devtool code that need to make commits have also
been updated to use the same logic.
This allows PATCHTOOL = "git" and devtool to be used on systems where
git user.name / user.email has not been set (on versions of git where
it doesn't default a value under this circumstance).
If you want to return to the old behaviour where the externally
configured user name / email are used, set the following in your
local.conf:
PATCH_GIT_USER_NAME = ""
PATCH_GIT_USER_EMAIL = ""
Fixes [YOCTO #8703].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rename the (main) log file of the oe-build-perf-test script from
'output.log' to 'oe-build-perf-test.log'. Also, add a new command line
option --log-file which makes it possible to use an alternative log file
name/path, if needed. Note that the file name/path is relative to the
output directory.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Write globalres log file and commit results to Git even if some tests
failed. Now that tests do not depend on each other there should be no
risk of bogus results caused by test failures.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New command line argument '-w' may be used to specify work dir other
than the default <GIT_DIR>/build-perf-test.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add new command line argument '-a' that can be used to define the
directory where results (tarballs) are archived. Giving an empty string
disables archiving which makes sense if you store results in Git.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add new command line argument '-C' that allows saving results in a Git
repository.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use getopts for parsing the command line. This changes the usage so that
if a commit (to-be-tested) is defined it must be given by using '-c',
instead of a positional argument.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Makes it possible to create easily sortable tags. Also, the default tag
format is updated to use the new keyword.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This makes it possible to create numbered tags, where the "basename" of
the tag is the same and the only difference is an (automatically)
increasing index number. This is useful if you do multiple test runs on
the same commit. For example, using:
--commit-results-tag {tester_host}/{git_commit}/{tag_num}
would give you tags something like:
myhost/decb3119dffd3fd38b800bebc1e510f9217a152e/0
myhost/decb3119dffd3fd38b800bebc1e510f9217a152e/1
...
The default tag format is updated to use this new keyword in order to
prevent unintentional tag name clashes.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Create a Git tag when committing results to a Git repository. This patch
also implements --commit-results-tag command line option for controlling
the tag name. The value
is a format string where the following fields may be used:
- {git_branch} - target branch being tested
- {git_commit} - target commit being tested
- {tester_host} - hostname of the tester machine
Tagging can be disabled by giving an empty string to
--commit-results-tag. The option has no effect if --commit-results is
not defined.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Do a pre-check on the path that is specified with --commit-results
before running any tests. The script will create and/or initialize a
fresh Git repository if the given directory does not exist or if it is
an empty directory. It fails if it finds a non-empty directory that is
not a Git repository.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A new command line option for defining the branch where results are
commited. The value is actually a format string accepting two field
names:
- {git_branch} expands to the name of the target branch being tested
- {tester_host} expands to the hostname of the tester machine
The option has no effect if --commit-results is not used.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Implement a new command line option '--commit-results' which commits the
test results data into a Git repository. The given path must be an
existing initialized local Git repository.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is safer as the current working directory may change.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Makes it possible to run only a subset of tests.
NOTE: The tests currently have (unwritten) dependencies on each other so
use this option with care. Mainly for debugging.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Adding argparse module from Python's standard library. This allow use
argparse without installing all python-misc modules. For compatibility,
add python3-argparse as RDEPENDS to python3-misc.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The Queue module has been renamed to queue in Python 3.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The missing split() causes dev and dbg packages to match.
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The --wilcard-version flag was only used in the srcrev variant of the
update-recipe command.
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
check_patch function opens patch file in text mode. This causes
python3 to throw exception when calling readline():
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xa7 in position
NNNN: invalid start byte
Opening file in binary mode and using binary type instead of strings
should fix this.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
$ python3
>>> import signal
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/path/to/sdk/sysroots/x86_64-pokysdk-linux/usr/lib/python3.5/signal.py", line 4, in <module>
from enum import IntEnum as _IntEnum
ImportError: No module named 'enum'
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The previous attempt on this was a bit erroneous, dropping time stamps
completely although only the timestamp format should've been changed.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
multi-configuration builds
Unfortunately to implenent multiconfig support in bitbake some APIs
had to change. This updates code in OE to match the changes in bitbake.
Its mostly periperhal changes around devtool/recipetool
[Will need a bitbake version requirement bump which I'll make when merging]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove timestamps from the stderr log in order to make the console
output more readable, i.e. more in line with the output from unittest
runner.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
So that the log file would not miss any records.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Prevent logger from writing to stderr when the tests are being run by
the TestRunner. During this time the logger output is only written to
the log file. This way the console output from the script is cleaner and
not mixed with possible logger records.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Convert scripts/oe-build-perf-test to be compatible with the new Python
unittest based buildperf test framework.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The new class is derived from unittest.TextTestResult class. It is
actually implemented by modifying the old BuildPerfTestRunner class
which, in turn, is replaced by a totally new simple implementation
derived from unittest.TestRunner.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch adds the following packages: python3-enum (needed by python3-git),
python3-selectors (needed by python3-subprocess), python3-signal (needed by python3-subprocess),
and it also fixes the following ones with missing dependencies: python3-subprocess,
python3-compression, python3-datetime
[YOCTO #10127] [YOCTO #10124] [YOCTO #10122]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
