| Age | Commit message (Collapse) | Author | Files |
|---|
|
In the simplest case, "runqemu qemux86 <some-image> qcow2 ovmf" for an
EFI-enabled image in the qcow2 format will locate the ovmf.qcow2
firmware file deployed by the ovmf recipe in the image deploy
directory, override the graphics hardware with "-vga std" because that
is all that OVMF supports, and boot with UEFI enabled.
ovmf is not built by default. Either do it explicitly ("bitbake ovmf")
or make it a part of the normal build
("MACHINE_ESSENTIAL_EXTRA_RDEPENDS_append = ' ovmf'").
The firmware file is activated as a flash drive instead of using the
qemu BIOS parameters, because that is the recommended method
(https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=764918#47) as it
allows storing UEFI variables in the file.
Instead of just "ovmf", a full path to an existing file can also be
used, just as with the rootfs. That may be useful when making a
permanent copy of the virtual machine data files.
It is possible to specify "ovmf*" parameters more than once, then
each parameter creates a separate flash drive. This way it is possible
to use separate flash drives for firmware code and variables:
$ runqemu qemux86 <some-image> qcow2 ovmf.code ovmf.vars"
Note that rebuilding ovmf will overwrite the ovmf.vars.qcow2 file in
the image deploy directory. So when the goal is to update the firmware
while keeping variables, make a copy of the variable file and use
that:
$ mkdir my-machine
$ cp tmp/deploy/images/qemux86/ovmf.vars.qcow2 my-machine/
$ runqemu qemux86 <some-image> qcow2 ovmf.code my-machine/ovmf.vars.qcow2
When Secure Boot was enabled in ovmf, one can pick that instead of
the non-Secure-Boot enabled ovmf.code:
$ runqemu qemux86 <some-image> qcow2 ovmf.secboot.code my-machine/ovmf.vars.qcow2
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
|
|
The magic detection of the rootfs parameter only worked for image
recipes which embedd the "image" string in the middle, as in
"core-image-minimal".
Sometimes it is more natural to call an image "something-image". To
get such an image detected by runqemu, "-image" at the end of a
parameter must also cause that parameter to be treated as the rootfs
parameter.
Inside the image directory, "something-image" has an -<arch> suffix
and thus no change is needed for those usages of
re.search('-image-'). However, while at it also enhance those string
searches a bit (no need for re; any()+map() a bit closer to the
intended logic).
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
|
|
'arg' isn't defined, the right name there is 'p'.
This fixes a rather obscure error message when that code path
ends up being taken:
$ runqemu some/existing-file-name
runqemu - ERROR - name 'arg' is not defined
runqemu - ERROR - Try 'runqemu help' on how to use it
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
|
|
upgrade.py imports oe.recipeutils in meta/lib/ but path to oe.recipeutils
is not provided. This fails populate_sdk_ext.
Signed-off-by: Luck Hoang <huyht1205@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Incorrect data was printed (recipe name instead of epoch number) when
displaying changes in epoch.
(From OE-Core rev: 5e2b1bfb684dc76963f692172f7457c2249c3266)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Moved creation of PartitionedImage object from DirectPlugin.create
method to init. It makes the code a bit more readable and logical.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Moved the code that generates real partition numbers from DirectPlugin
to PartitionedImage.
The idea is to have all code that works with partitions
in PartitionedImage class.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Moved code that calls prepare method of Partition objects
from DirectPlugin to PartitionedImage.prepare.
The idea is to have all code that works with partitions
in PartitionedImage class.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Moved setting of bootloader source from do_create method
to __init__ as it doesn't have anything to do with image
creation.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Moved code that generates partition UUIDs from DirectPlugin to
PartitionedImage class as it's more logical to have it there.
This allows the code to be reused by other imager plugins.
Got rid of having yet another list of partitions in PartitionedImage.
Reused the list passed from DirectPlugin.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Replaced call of _get_part_num method with an attribute.
This eliminates the need to call the method and loop over
partitions every time we need to know realnum for partition.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Removed catching CreatorError and raising it again.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Don't transform ImagerError exception into warning.
Let wic to catch it on the upper level.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Removed java-like setter set_bootimg_dir. It's more pythonic
to access public attributes directly.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Set default value of --ondisk to 'sda' to ensure
we always have disk name for the partition.
This is a first step of replacing --ondisk with
disk <name> attribute of .wks. This is better as
all partitions share the same disk.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
This file and utils/oe folder are not needed anymore as
all modules were removed or moved out of this directory.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
As PartitionedImage is only used in direct.py it makes sense
to move it there. It's easier to maintain (and refactor) it
this way.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Disk operations were spread over DirectPlugin, DiskImage and Image
code making the code hard to understand.
Renamed Image class to PartitionedImage.
Removed DiskImage class.
Moved disk operations to PartitionedImage.
There was an implicit support for multiple disks: if different devices
were specified in .wks file (e.g. --ondisk sda and --ondisk sdb), wic
would theoretically generate multiple images. This is quite confusing
option and the code supporting it was broken for a long time. The same
effect (multiple output images) can be achieved in obvious and clear
way - by using multiple .wks files.
This functionality was removed. PartitionedImage works only with
one image. This makes the code less complex and easier to maintain.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
It will omit the given path from the resulting partition, and if the
given path ends in a slash, it will only delete the content, and keep
the directory.
Since mkfs only accepts whole directories as input, we need to copy
the rootfs directory to the workdir so that we can selectively delete
files from it.
Since we want to use the copyhardlinktree() function, we need to put
the generic oe lib in the module search path.
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There is no need to pass scripts_path from main wic module
down the stack as it's not used there.
Removed scripts_path argument from DirectPlugin class
and wic_create function.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Removed unused import of wic.errors module.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Removed unused _disks, _disk_format and _disk_names
attributes from DirectPlugin class.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Removed artificial _partitions_layed_out attribute and
unneeded call of layout_partitions method.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Partition attributes were copied to the dictionary in partitionedfs
code, which makes the code hard to follow.
Used partition object passed from direct.py module as is in
partitionedfs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Replaced _get_parts getter with direct attribute
access to self.parts
Removed code that implicitly created partition
if there are no partitions mentioned in .wks file
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Renamed private methods with leading double underscores:
__create_partition -> _create_partition
__add_disk -> _add_disk
There is no point to have those names mangled, one underscore
is enough.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
3 lines long private method __add_partition is called only
from add_partition method. Merged them together to increase
readability.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Private method __format_disks is called only from create
method making the code less readable. Merged the code
into one method.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Without the '-s' option realpath will error out if the given path does
not exist.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Drop support for committing results into Git repository. The
functionality was not directly related to testing and feels unnecessary
complication of the script. The functionality has been moved into a
separate oe-git-archive script.
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Start to use the new helper script for archiving results data in Git.
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A helper script for committing data to git and pushing it upstream. The
motivation for the script stems from the need to archiving QA test
results in git, but it could be used elsewhere, of course. The script
needs to be run under an initialized build environment because it
utilizes bitbake configuration information.
[YOCTO #10582]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Now that the datastore works dynamically we don't need the update_data calls
so we can just remove them. They're not actually done anything at all for
a while.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the move to tinfoil2, the behaviour when parsing failed has changed
a bit - exceptions are now raised, so handle these appropriately.
Specifically when if parsing the recipe created when running devtool add
fails, rename it to .bb.parsefailed so that the user can run bitbake
afterwards without parsing being interrupted.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Numbers within SCM (e.g. git) URLs are extremely unlikely to be valid
version numbers - more likely they are just part of the name, thus don't
try to extract them and use them as the version - doing so causes pretty
bad behaviour within devtool:
--------- snip ---------
$ devtool add https://github.com/inhedron/libtr50
NOTE: Fetching git://github.com/inhedron/libtr50;protocol=https...
...
NOTE: Using default source tree path .../build/workspace/sources/libtr
...
RecursionError: maximum recursion depth exceeded while calling a Python object
--------- snip ---------
(This was because ${PV} was being substituted into the URL, but PV's
value was being set to include ${SRCPV}, so there was a circular
reference.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
npm's package.json supports two types of dependencies -
optionalDependencies and dependencies; in the code for creating a recipe
from a non-npm source (e.g. a git repository) we were not handling
optionalDependencies and thus when pointed at a node.js application
outside of npm we weren't taking care of all dependencies.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As syslinux module has been recently removed and
serial_consloe_form_kargs became local API in rootfs_pcbios_ext plugin
it should be called without syslinux. prefix.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
wic-tools recipe specific sysroot contains syslinux as wic-tools
depends on it. Used wic-tools target to get syslinux path should
guarantee that syslinux is installed there and can be used.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
wic code is hard to follow due to deep and twiggy class
inheritance tree.
Flatten imager tree:
wic -> wic_create -> Creator -> DirectPlugin -> DirectImageCreator
to
wic -> wic_create -> DirectPlugin
by
removing Creator class and creator module
merging DirectImageCreator into DirectPlugin
Changed APIs to use the same parameters names.
Passed parsed command line options as an object down the stack.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allows us to use typing.py without having to add the whole
python3-misc package.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allows us to use ipaddress without requiring the add the whole
python3-misc.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allows us to depend on _compat_pickle.* wihtout having to add the whole
python3-misc.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
socketserver.* should be part of python3-netserver.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
http/server.py requires argparse.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allows us to use html.py without importing misc.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Commit: 512334f102a33833d39af53467894315f0715d07
"python-3.5-manifest: Add imp to importlib"
added imp to importlib in the generated manifest, but not in the generator script.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Used options.outdir instead of image_output_dir.
There is no sense to use extra variable for this.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It was a typo in current code: mktemp was used instead of
mkdtemp to create work directory. This is fixed by using
mkdtemp.
Create work directory as a subdirectory of output directory
to make sure both are on the same partition to make moving
of result image faster.
This also fixes possible disk space issues as mkdtemp uses
TMPDIR, TEMP or TMP environment variables to get default value
of its 'dir' parameter. Those variables are usually pointing
to /tmp, which is not the best location to create huge images.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Make sure output directory exists before creating an image.
Create it if it doesn't exist.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
