| Age | Commit message (Collapse) | Author | Files |
|---|
|
Copied layers with 'cp -a' instead of calling shutil.copytree as
copytree fails to copy broken symlinks.
More pythonic fix would be to use copytree with 'ignore' parameter,
but this could slow down copying complex directory structures.
[YOCTO #8825]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Each time oe-selftest runs, the oe-selftest.log file is overwritten.
This patch solves it by adding time stamp to each selftest log file
and doing a symlink named as oe-selftest.log to the last one created.
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Having fetched the source and unpacked it to a temporary directory, we
then move part of it to the destination directory, or if the source is at
the top level we move the whole temporary directory, but in the latter
case we were later attempting to delete the temporary directory which no
longer existed. Clear out the variable so that doesn't happen.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* tar and binutils we can assume are there
* libsocket is only relevant on BSD systems, so we can ignore it.
* Detect more things implying gettext/intltool is needed
* Detect glib-2.0 requirement.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Much of this was copy/pasted from the extract subcommand code; make it
specific to sync.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We deliberately leave the source tree alone when resetting in case it
contains any work in progress belonging to the user; tell them that
we're doing this so they aren't surprised about it still existing later
on.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a recipe in the workspace actually exists as a file within the
workspace (e.g. after doing "devtool add" or "devtool upgrade") then
show the path to the recipe file on the status line for the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As per the changes to "devtool add", make the source tree path optional
and use the default path if none is specified.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Having to specify -f is a little bit ugly when a URI is distinctive
enough to recognise amongst the other positional parameters, so take it
as an optional positional parameter. -f/--fetch is still supported, but
deprecated.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
recipetool create now has all the logic in it for auto-detecting the
name and version, and using those in the file name - so we can make the
name an optional parameter for devtool add and we pick up the file name
that recipetool has used after the fact.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Assuming we're fetching source remotely (from a URI) we can default the
source tree that will be extracted from it to a "sources" directory
under the workspace in order to save the user specifying it if they
don't have a preferred location.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python's argparse module can't handle when several optional positional
arguments (set with nargs='?') are intermixed with other options. If the
positional arguments aren't optional then this isn't an issue; thus when
changing positional arguments to optional (as we are doing with devtool)
we need this workaround.
This is a pretty horrible hack, but we don't want this flexibility of
ordering to disappear simply because we made some arguments optional.
Unfortunately the corresponding bug remains unresolved upstream even in
Python 3, and argparse is not really designed to be subclassed so it
doesn't make things like this easy.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bbappend already exists at this point, so we know what its path is -
there's no need to figure it out from scratch here.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're repeating this in a couple of places, so we might as well have a
function to do it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a few clarifying words.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add an "edit-recipe" subcommand that runs your default editor (as
specified by the EDITOR environment variable) on the specified recipe in
the workspace. Note that by default the recipe file itself must be in
the workspace - i.e. as a result of "devtool add" or "devtool upgrade";
however there is a -a/--any-recipe option to override this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Often the filename (e.g. source tarball) contains the name and version
of the software it contains.
(This isn't intended to be exhaustive, just to catch the common case.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some build systems (notably autotools) support declaring the name and
version of the program being built; since we need those for the recipe
we can attempt to extract them. It's a little fuzzy as they are often
omitted or may not be appropriately formatted for our purposes, but it
does work on a reasonable number of software packages to be useful.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes we want to force one handler to run before another; if the two
handlers are in different plugins that's difficult without some kind of
priority number, so add one and sort by it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user specifies a URL that just returns a web page, then it's
probably incorrect (or broken); attempt to detect this and show an error
if it's the case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you specify a URL ending in /, BitBake's fetcher returns a localpath
of ${DL_DIR}, and if you then try to unpack that it will attempt to copy
the entire DL_DIR contents to the destination - which at least on my
system filled my entire /tmp. Obviously we should fix the fetcher, but
at least detect and stop that from happening here for now.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If SRC_URI happened not to be in the pre-generated lines then this code
would error out. This is unlikely to happen with the way the create code
is structured at the moment, but handle it just in case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In my testing here it appears make -qn returns an error (exit code 2)
whereas make -n doesn't; I can't immediately tell why based on the
documentation. We don't actually care for it to be quiet since we're
capturing the output, so let's just leave -q off and have this work
properly as a result.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a fetch error occurs, the fetcher already prints a reasonable error -
we don't need the traceback as well, so catch that and exit if it
occurs.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When you grab a URL for a github repository you'll almost certainly find
it in https://github.com/path/to/repository.git format; but bitbake's
fetcher can't handle that because it'll see https:// at the start and
assume it should use wget to fetch it. If the URL starts with http:// or
https:// and the path part ends with .git then assume it's a git
repository and adjust it accordingly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For scripts that use Python's standard argparse module to parse
command-line arguments, create a subclass which will show the usage
the usage information when a command-line parsing error occurs. The most
common case would be when the script is run with no arguments; at least
then the user immediately gets to see what arguments they might need to
pass instead of just an error message.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the SDK update server hasn't been set in the config (when building
the extensible SDK this would be set via SDK_UPDATE_URL) and it wasn't
specified on the command line then we were failing with a traceback
because we didn't pass the default value properly - None is interpreted
as no default, meaning raise an exception if no such option exists.
Additionally we don't need the try...except anymore either because with
a proper default value, NoSectionError is caught as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If no mountpoint is specified for a partition command the partition
will be created but not mounted — mention this in the kickstart
help text.
[YOCTO #8820]
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The script oe-buildenv-internal is called from oe-init-build-env.
Make sure oe-init-buildenv does not return an error if BB_ENV_EXTRAWHITE is
already set, otherwise this will cause oe-init-build-env to fail.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
I ran into an issue where a patch just deleting a single file
within the repository (meta/recipes-devtools/m4/m4/make.patch)
would get skipped by combo-layer.
It turns out this has the patch header (commented to avoid breaking scripts):
: diff --git a/meta/recipes-devtools/m4/m4/make.patch b/meta/recipes-devtools/m4/m4/make.patch
: deleted file mode 100644
: index 79fb415..0000000
: --- a/meta/recipes-devtools/m4/m4/make.patch
: +++ /dev/null
: @@ -1,42 +0,0 @@
and this is classed as > 5 headers in filterdiff. When we piped the path
through filterdiff, the --- line disappears, then the second time we pass
through filterdiff, it shows no lines changed and the patch is assumed
to be empty and skipped.
Changing MAX_HEADERS in filterdiff is one way to fix this, another would
be to grep out "deleted file mode" lines. Instead, we can use new
git syntax to exclude files from the git format-patch instead and avoid
filterdiff entirely.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
whitelist
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
[YOCTO #8750] Allow oe-selftest to run custom test suites based on different criteria
1. Can run custom lists of tests based on different criteria:
--run-tests-by <name|class|module|id|tag> <list of tests|classes|modules|ids|tags>
eg: --run-tests-by module imagefeatures signing recipetool
--run-tests-by id 1377 1273 935
--run-tests-by tag wic sstate bitbake
2. Can list tests based on different criteria:
--list-tests-by <name|class|module|id|tag> <list of tests|classes|modules|ids|tags>
eg: --list-tests-by module imagefeatures signing recipetool
--list-tests-by id 1377 1273 935
--list-tests-by tag wic sstate bitbake
3. Can list all tags that have been set to test cases:
--list-tags
The list of tags should be kept as minimal as possible.
This helps preview the tags used so far.
To take advantage of the 'tag' feature:
- add @tag(feature=<>) to testcases
eg: @tag(feature='signing') for a single tag
@tag(feature=(('signing', 'sstate')) or
@tag(feature=['signing', 'sstate']) for multiple tags
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
According to the BitBake User Manual the environment variable BB_ENV_EXTRAWHITE
specifies an additional set of variables to allow through (whitelist) from the
external environment into BitBake's datastore. However, running:
$ source oe-init-build-env build-name
will overwrite any pre-existing BB_ENV_EXTRAWHITE variables.
This patch modifies this behaviour: all oe-build-internal BB_ENV_EXTRAWHITE
variables are appended to any potentially already existing BB_ENV_EXTRAWHITE
variables. (The variables are only appended if not already in BB_ENV_EXTRAWHITE)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add 'do_kernel_configme' and 'do_kernel_configcheck' to
SRCTREECOVEREDTASKS of kernel packages. These tasks should not be run
because kernel meta in the srctree is not necessarily up-to-date or
even present which causes build failures and/or invalid kernel config.
Especially so because 'do_patch' which is a dependency of
'do_kernel_configme' is not being run.
We now store .config in the srctree and 'do_configure' task is able to
run successfully.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This makes the correct kernel config to be used when building kernel
from srctree (extrernalsrc). If no kernel config is present in the
builddir 'do_configure' task copies .config from the srctree.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add new wks file as a example for a custom bootloader configuration.
This change also includes the configuration that file that will be
used.
This example is using syslinux with MBR, the configuration file is
almost the same as the one generated by wic. As stated before this
is just an example.
[YOCTO #8728]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This just adds the "configfile" option for the bootloader
to wic help.
[YOCTO #8728]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This change will allow to use a user defined file as the
configuration for the bootloaders (grub, gummiboot, syslinux).
The config file is defined in the wks file with the "configfile"
option in the bootloader line.
[YOCTO #8728]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This change add two new function to search for files in the
canned-wks folder for all the layers included in bblayers.conf.
This will be used to search for custom configuration files for
the bootloaders.
There are similar functions in the wic engine, but these are
focused in wks files only, so it was needed to create new ones.
[YOCTO #8728]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently wic does the bootloader configuration file on the fly.
This change introduce a configfile variable for the bootloader;
this is to have a user defined configuration file for the
bootloaders (grub, syslinux, and gummiboot). This is particular
useful when having a multiboot system or scripts embedded in the
configuration file.
[YOCTO #8728]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Sort the list of packages in list-pkg-files to make the output easier to read.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This follows how bitbake performs path insertion, and fixes a
failure to start wic on Ubuntu 15.10 with the distribution's
version of python-ply installed.
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python3-native_3.4.3.bb -> python3-native_3.5.0.bb:
- changed version
- changed cheksum
- no license change, just dates
python3_3.4.3.bb -> python3_3.5.0.bb:
- changed version
- changed cheksum
- no license change, just dates
New:
- use_packed_importlib.patch: Fixes importlib on cross-compile environments
Rebased:
- Manifest
- 000-cross-compile.patch
- 020-dont-compile-python-files.patch
- 04-default-is-optimized.patch
- python-3.3-multilib.patch
- distutils3-base.bbclass
- distutils3-native-base.bbclass
- python3native.bbclass
Upstream:
- makerace.patch
Misc:
- pip2 is handled as default on major distros,
modified python3-pip to leave /usr/bin/pip available for pip2
- Fixed importing pip3 from python3 interpreter
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Enable code coverage through the library 'python coverage'. In case the environment
variable COVERAGE_PROCESS_START is present (one of the requisites for measuring
sub-processes; the second one is including some coverage statements into the
python sitecustomize.py file) it will be taken into account, otherwise it is
exported with value '.coveragerc'. The latter value is a configuration file
(also automatically created) with some default settings. Once tests are
executed, a coverage report is shown on the log and the coverage output data is stored
with name '.coverage.<args>' where '<args>' is the name of the unit tests executed
or 'all_tests' when running with --run-all-tests. This output data can be latter used
for better reporting using the same tool (coverage).
As briefly indicate before, measuring sub-process implies setting the env variable
COVERAGE_PROCESS_START (done automatically by the oe-selftest code with this patch if
not already set) and creating a sitecustomize.py as explained on [1].
If either one of these is missing, complete coverage will be incomplete.
Current measurements for 'oe-selftest --run-all-tests' indicate that current coverage
is around 42 % taking into account BBLAYERS, bitbake and scripts folders. More details
on [2], indicating the coverage per file/module.
This tasks has been done together with Humberto Ibarra <humberto.ibarra.lopez@linux.intel.com>
[YOCTO #8679]
[1] http://coverage.readthedocs.org/en/latest/subprocess.html
[2] https://bugzilla.yoctoproject.org/attachment.cgi?id=2854
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When booting weston-core-image with latest wayland/weston/libinput
mouse/touchpad would not work on qemux86, this fixes the issue
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This should have been register_commands rather than register_command;
I used register_commands in devtool so lets change this here to be
consistent with that. (Since this is extensible through layers though we
need to remain compatible with the old name, so fall back to that if the
new function name isn't there.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a recipetool subcommand "setvar" to set a variable in a file. This
uses our existing logic such that it doesn't matter if the variable is
already set in the recipe, if it's set in the recipe or some inc file,
and if the variable is not currently set that the line setting the
variable gets inserted in the right place in the file.
Implements [YOCTO #7676].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use bb.utils.edit_metadata() to replace some of the logic in this
function; this avoids us effectively having two implementations of the
same thing. In the process fix the following issues:
* Insert values before any leading comments for the next variable
instead of after them
* Insert overridden variables (e.g. RDEPENDS_${PN}) in the correct place
* Properly handle replacing varflag settings (e.g. SRC_URI[md5sum])
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Make some minor clarifications to help text
* Drop ArgumentDefaultsHelpFormatter and just put the defaults in the
text itself where needed (because otherwise you get defaults shown for
store_true options which is somewhat confusing).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
