| Age | Commit message (Collapse) | Author | Files |
|---|
|
gethostip comes from syslinux. It seems odd to depend on a bootloader
to clone a git repository.
Switch to using getent from the c-library, which should be available
on every system.
We now also support the case where a hostname resolves to more than
one IP address.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a subcommand which will "finish" the work on a recipe. This is
effectively the same as update-recipe followed by reset, except that the
destination layer is required and it will do the right thing depending
on the situation - if the recipe file itself is in the workspace (e.g.
as a result of devtool add), the recipe file and any associated files
will be moved to the destination layer; or if the destination layer is
the one containing the original recipe, the recipe will be overwritten;
otherwise a bbappend will be created to apply the changes. In all cases
the layer path can be loosely specified - it could be a layer name, or
a partial path into a recipe. In the case of upgrades, devtool finish
will also take care of deleting the old recipe.
This avoids the user having to figure out the correct actions when
they're done - they just do "devtool finish recipename layername" and
it saves their work and then removes the recipe from the workspace.
Addresses [YOCTO #8594].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This provides us with the information we need to remove the original
version recipe and associated files when running "devtool finish" after
"devtool upgrade".
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This will be called by "devtool finish" to allow it to update the recipe
or create the bbappend depending on the destination.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This will be called by "devtool finish" to allow it to reset the recipe
at the end.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If there are files in the oe-local-files directory which are identical
to the original version, then we shouldn't be copying them to the
destination layer. This is particularly important when using the -a
option to create a bbappend.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
devtool update-recipe was defaulting to the ${BPN} named directory when
adding patches next to a recipe, but that meant if you already had files
in a ${BP} named directory (i.e. name and version) or "files" then you'd
end up with two directories next to the recipe, which is usually not
what you want. To avoid this, look through FILESPATH and take the first
one that's the same level or one level down from the recipe and already
exists, if any.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
zipfile.py has dependencies on importlib, threading, and shell
importlib has a dependency on lang
operator and contextlib added to the lang package instead of falling into misc
Signed-off-by: Derek Straka <derek@asterius.io>
|
|
According to wic documentation partition mount point is an optional
argument. Skipping mount point also makes sense in certain
configurations when one needs to specify a partition that is not mounted
by the running system, such as a recovery or a mirror partition (in dual
rootfs setups).
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This wks is just a copy of gummiboot wks with bootloader
changed to systemd-boot. A very basic boot test on a X86
target is done with a direct-boot image generated by:
wic create mksystemd-bootdisk -e core-image-minimal
Because we plan to replace gummiboot with systemd-boot at any
time in the future, we summarize history (as much as I can) of
the current gummiboot wks before it's gone:
-----------------------------------------------------------------
commit 7d4bb40905fab38fb3db1d0e17afbc803622f00c
Author: Ed Bartosh <ed.bartosh@linux.intel.com>
Date: Wed Sep 2 13:58:02 2015 +0300
wic: get rid of scripts/lib/image
Moved content of scripts/lib/image/ to scripts/lib/wic as
one directory with the same name as a tool is self-explanatory
and less confusing than two.
(From OE-Core rev: 5dc02d572794298b3362378cea3d7da654456c44)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 77561e719181d58289687373eebadce764f838a7
Author: Ed Bartosh <ed.bartosh@linux.intel.com>
Date: Wed Sep 2 13:58:01 2015 +0300
wic: use ext4 in canned .wks files
Latest kernel doesn't have ext3 compiled in. Wic images produced
from canned .wks can't boot because of that. Switching to ext4
fixes this issue.
(From OE-Core rev: d281a65a81f369fc8d75023b8f911ce4106969c1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 072657ce98414afdd6f68941847e21fc5ce496c7
Author: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Mon Aug 11 20:35:41 2014 -0500
wic: Add mkgummidisk kickstart file
This is the same as mkefidisk but uses gummiboot instead of grub-efi.
(From OE-Core rev: 5979409ebfab0bb07b3c2b2fcf14a722c441f07b)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-----------------------------------------------------------------
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The new systemd-boot enabled in OE is the old gummiboot
merged into systemd project. Our intention is to replace
gummiboot with systemd-boot in OE once every feature based
on gummiboot is supported with systemd-boot.
Before we can purge gummiboot, we temporarily keep both of
the two bootloaders supported.
Patch doesn't do replacement for every "gummi" occurrence.
We think cleaning can be done in background after we disable
people to use gummiboot, so we just keep change small and
safe this time.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python3-shell needs python3-compression for tarfile.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is currently possible to specify a file (e.g. a tarball) on the local
disk as the source, but you have to know to put file:// in front of it.
There's really no need to force users to jump through that hoop if they
really want to do this so check if the specified source is a file and
prefix it with file:// if that's the case.
Also ensure the same works for "devtool add" at the same time.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For a while now, Github hasn't been advertising a specific repository
URL since cloning the web URL with git works. Armed with this knowledge
and fully expecting people to just paste the github URL, we need to
handle this situation specially. If it looks like a github URL to the
root of a repository then treat it as a git repository instead of a
normal https URL to be fetched by the wget fetcher.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
move graph-tool to python3
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These recipes can't be used with devtool because they can't be unpacked
in the normal way.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If devtool returns exit code 4 then record the recipes as "skipped"
rather than "failed" - these are recipes we know cannot work (usually
because they don't provide any source).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Certain recipes cannot be used with devtool extract / modify / upgrade -
usually because they don't provide any source. Return a specific exit
code (4) so that scripts such as scripts/contrib/devtool-stress.py know
the difference between this and a genuine failure.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We were attempting to open the recipe file unconditionally here - we
need to account for the possibility that the recipe file has been
deleted or moved away by the user.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In OE-Core revision 7baf57ad896112cf2258b3e2c2a1f8b756fb39bc I changed
the default update-recipe behaviour to only update patches for commits
that were changed; unfortunately I failed to handle the --initial-rev
option which was broken after that point. Rework how the initial
revision is passed in so that it now operates correctly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently gnome-terminal just returns straight away, opening a terminal in a new
separate process we have no insight into. For patch resolution, this leads to
spawning many different terminal windows, for pydevshell, it just flashes a window
up and then closes.
We need to block until the command completes but gnome-terminal gives us no way
to do this. We therefore write the pid to a file using a "phonehome" wrapper
script, then monitor the pid until it exits.
[YOCTO #7254]
(also fixing do_devpyshell)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is a typo in the logging parameters, "filname" is being used instead of "filename" for yocto-kernel, yocto-layer and wic scripts. This didn't cause issues before since python 2 didn't validate unused parameters but with python >= 3.4.3 an exception is thrown. This patch fixes this parameter name.
[YOCTO #9834]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When detecting the second serial options we shouldn't append the
custom QEMU options otherwise we will end duplicating those.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Code cleanup, no functional changes - this code was never used.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We're opening source files with the default encoding (utf-8) but we
can't necessarily be sure that they are UTF-8 clean - for example,
recipetool create ftp://mama.indstate.edu/linux/tree/tree-1.7.0.tgz
prior to this patch resulted in a UnicodeDecodeError. Use the
"surrogateescape" mode to avoid this.
Fixes [YOCTO #9822].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As /dev/pty opened in binary mode its content has to
be decoded when reading from it and encoded when writing to it.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Opening text stream in unbuffered mode raises the following
exception In Python 3:
ValueError: can't have unbuffered text I/O
Fixed by leaving std* streams in text mode and flushing
stdout explicitly.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If BB_SETSCENE_ENFORCE is set to "1" and an sstate package fails to
download outside of the whitelist specified by
BB_SETSCENE_ENFORCE_WHITELIST, then fail immediately so you can tell
that the problem was caused by failing to restore the task from sstate.
Part of the implementation of [YOCTO #9367].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A shell script wrapper around oe-build-perf-test script. The purpose of
this wrapper is to act as a executor script, making it possible to run
the tests with a single command. The wrapper script initializes the
build environment, runs oe-build-perf-test and archives the results.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The new option defines the output directory for the test result data.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Makes it possible to guard that multiple tests are not run in parallel.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Using this option the script appends test results into a 'global results
file'. A CSV-formatted output of the results. This option is to provide
compatibility with the old build-perf-test.sh.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The new class is responsible for actually running the tests and
processing their results. This commit also adds a decorator function for
adding new tests. No automatic test discovery, at least yet.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a new utility class for dropping Linux kernel caches. It uses sudo
and tee to write to the drop_caches file. Checking if the user has the
permissions to drop caches (without a password) is done by trying to
writing an invalid value to the drop_caches file. This way, we will find
if writing (with tee) is possible but not really dropping caches, yet.
User can avoid giving the password by adding something like:
<user> ALL = NOPASSWD: /usr/bin/tee /proc/sys/vm/drop_caches
to the system sudoers file.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The script will be required to be run in an initialized bitbake build
environment.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Initial wireframe for re-writing build-perf-test.sh in Python.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
GNU make looks for "makefile" and "GNUmakefile" in addition to
"Makefile", so add these other names to the heuristic for detecting a
make-based project.
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
list of failed
* format of bitbake tasks changed in:
2c88afb taskdata/runqueue: Rewrite without use of ID indirection
-ERROR: Task 4 (/OE/build/oe-core/openembedded-core/meta/recipes-devtools/rpm/sftp.bb, do_fetch) failed with exit code '1'
+ERROR: Task /OE/build/oe-core/openembedded-core/meta/recipes-devtools/rpm/sftp.bb:do_fetch (/OE/build/oe-core/openembedded-core/meta/recipes-devtools/rpm/sftp.bb:do_fetch) failed with exit code '1'
so strip not only '\.bb, .*' used before, but also '\.bb;.*' to drop
the task name to get recipe name.
* for more details see:
http://lists.openembedded.org/pipermail/openembedded-core/2016-June/123132.html
* without this change you can see test-dependencies.sh trying to rebuild packages
like:
Building recipe: fbprogress (6/21)
Building recipe: fbprogress.bb:do (7/21)
where the later of course doesn't exist as a recipe
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With Python 2, argparse subparsers behaviour in Python 2 was to print
the usage information if the subparsers argument wasn't specified.
However, with Python 3.2.3 and later a subparsers argument is not
required by default, leading to errors when no arguments are specified:
AttributeError: 'Namespace' object has no attribute 'func'
Restore the previous desired behaviour of showing the help text for
devtool, recipetool and the devtool-stress script by setting
subparsers.required to True.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow specifying more than one recipe on the devtool reset command line.
Also tweak the help text slightly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Clarify slightly the intended usage of the workspace layer.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If buildhistory-diff can't import git module it throws error
message suggesting to install it.
Due to the move to Python 3 the suggested package name and
version became outdated.
Changed package name to python3-git and version to >= 0.3.4
as GitPython supports Python 3 starting from 0.3.4.
[YOCTO #9741]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
New option can be used for displaying full information about binary
package(s), including name, full version, recipe name, recipe full
version and package size.
This information can be useful inside custom buildhistory class
to produce detailed image manifest for further analysis.
List of packages can be specified as command line arguments or can
be read from file (e.g. from existing image manifest).
Warning: In case of image manifest is used as input outside of build
process, be aware that pkgdata might change since the time image
was built.
Output format:
{PKG} [PKGE:]{PKGV}[-{PKGR}] {PN} [PE:]{PV}[-{PR}] {PKGSIZE}
Signed-off-by: Alexander D. Kanevskiy <kad@kad.name>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The current qemuzynq options were causing QEMU to exit instead of
booting as the QEMU Zynq-7000 machine does not have virtio or
display devices.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reported-by: Arno <star@gmx.li>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The default arparse behaviour in Python 2 and early versions of Python 3
was to print usage message if no subcommands provided by user.
In Python >= 3.2.3 subparser has to have attribute 'required' set to
True to behave similar way.
By default subparser.required attribute is set to False, usage message is
not printed and code continues to be executed.
oe-pkgdata-util code raises AttributeError exception in
this case:
AttributeError: 'Namespace' object has no attribute 'func'
Fixed this by setting subparser.required to True.
[YOCTO #9711]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
swabber hasn't been used in years and never did work well in the first
place. Remove its recipes, class and configuration.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was broken with the python3 fixes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Encoded data before sending it through http as urllib expecting bytes.
Fixed TypeError: POST data should be bytes or an iterable of bytes. It
cannot be of type str.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
