Age | Commit message (Collapse) | Author | Files |
|
Added the change that prevented runqemu to throw
sound errors.
[YOCTO #3528]
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add logic in the create-pull-request to detect and warn about the
trailing white space inserted by patches.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Have the script skip:
* "Recipe" lines.
* Lines with 11 "=", not 12.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
change
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
commandline
Rather than hardcode the value of "8", allow the minimum task length to be
configured from the commandline using the -m option. "-m 0" means all
tasks will be graphed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If two entries have the same start time, the data store used will cause
all but one of the entries to be lost. This patch enhances the data
storage structure to avoid this problem and allow more than one
event to start at the same time.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the URL, there may be more than just digits in the version section,
something like xz 5.1.2alpha. Update RE pattern to catch all the string
after package name and before '.tar' in URL as package version.
And error message which has been sent to /dev/null still shows on Ubuntu
12.10 with perl 5.14. Update the way to find source tar file to eraser
the error message.
configure files may rewrite the version section, and that is not necessary.
Test when version section has been set, omit the version value from
configure files.
And tweak for output to bb file.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Since we generally have lots of copies of the directories created using this tool, use
hardlinks where possible. This should save a little disk space and improve performance
slightly.
(From OE-Core rev: bfa11c028c2da093f7b4e6b7b1d611da90ae052f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
if the mkdir fails
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
on more than one branch
If a revision is in more than one branch, the check_rev_branch() function can't
cope with it and the tool returns incorrect errror messages. This patch
ensures it copes with this situation.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
location doesn't exist
* fixes [YOCTO #3116]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows for use of bitbake in offline mode, but override it in
command line.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A miscalculation in the way the port numbers of mountd and nfsd
are created was causing conflicts when starting multiple instances
of qemu using userspace nfs.
Thanks to Rudolf Streif for proposing this fix!
Fixes [YOCTO #1969]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
mountd requires rpcbind or portmap. Check that one of these
services is running before doing anything else, and report
a user-friendly error when they are not found.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If vhost_net module is not properly installed,
runqemu script will report the error and
provide the user with a link to the guide.
Also corrected small cosmetic issues in
runqemu script messages.
Also removed <> (read/write) check.
Fixes [YOCTO #3184]
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The SDK/ADT may ship with a python installed which may not have all the modules
need for a bitbake build. We should therefore detect if its already present in the
environment and error out in this case, asking the user to use a clean environment.
This also removes the potential for any other conflict between the two.
[YOCTO #2979]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bitbake fails to run when an empty element exists in $PATH. Avoid
creating this situation when $CROSSPATH is not set.
This fixes bug [YOCTO #3101]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Ran into another bug that was masked by hiding a bitbake error message.
This catches this situation and displays the error to the user.
Also includes whitespace fixes.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
location doesn't exist
* fixes [YOCTO #3116]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the files being relocated are already used by other processes the
relocate script will fail with a traceback. This patch will trap any IO
errors when opening such a file and gracefully report them to the user.
Also change the exit code from 1 to -1 for a better adt-installer user
experience (like pointing the user to the adt_installer.log).
[YOCTO #3164]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On Fedora systems (and likely others), ifconfig returns interface
names that end with a colon. Make sure we strip the colon off the
tap device name before using it.
This fixes [YOCTO #3028]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
KVM, paravirtualization and virtio drivers are now activated
in runqemu using the kvm option flag for qemux86-64.
Host CPU features are also exported to guest OS (Yocto Linux).
Usage example: runqemu qemux86-64 core-image-x11 kvm
Implements [YOCTO #2550].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
KVM, paravirtualization and virtio drivers are now activated
in runqemu using the kvm option flag for qemux86.
Host CPU features are also exported to guest OS (Yocto Linux).
Usage example: runqemu qemux86 core-image-x11 kvm
Implements [YOCTO #2550].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
In certain edge cases, bitbake may fail to run and cause setup_tmpdir()
within runqemu to fail, and not give the user a helpful error message.
Catch this case and show the user the output of bitbake -e.
This fixes [YOCTO #3112]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Sometimes it is convenient to prepare a bootable image from the
host rather than using a live-image to install to a disk on the
target.
This script takes a live image as input, partitions a device, and
performs the installation just as the installer would if run on
the target.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If both branch and last_revision are specified for a component when
combo-layer init is run, ensure that the specified revision is actually
on the specified branch and error out if not. Also ensure that the error
message mentions the component.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If last_revision is specified for a component when running combo-layer
init, then use that revision instead of the latest revision on the
branch. Also, remove unnecessary git checkout during init since we
specify the revision to all calls to git when dealing with the component
repositories.
Fixes [YOCTO #3040].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When using runqemu with distros outside oe-core then
MACHINE may not be there in local.conf so use the one
thats available in environment of runqemu which is actually
the correct one.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
New qemu calls the x86 system emulator to be qemu-system-i386
which is consistent now so change it in scripts
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
modified scenario files.
Signed-off-by: veerabrahmam <veerabrahmamvr@huawei.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
one test case to check syslogd is executing on target.
Signed-off-by: veerabrahmam <veerabrahmamvr@huawei.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
one test case to check disk space availability.
Signed-off-by: veerabrahmam <veerabrahmamvr@huawei.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
one test case to check bash command availability on qemu target.
Signed-off-by: veerabrahmam <veerabrahmamvr@huawei.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
the autoconf-nativesdk package name was recently changed to nativesdk-autoconf which in turn broke the cleanup-workdir script. Changed the package to the correct name.
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* The problem is that you're looking for duplicates across all available archs, so
armv4t and armv7a populate_sysroot are considered duplicate and only last one is
kept, but to rebuild from sstate-cache you need both!
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* find them dynamically in layers like AVAILTUNES
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
available tunes
* many layouts have other layers on the same level as oe-core checkout
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* it was also picking line
openembedded-core/meta/conf/machine/include/README:AVAILTUNES - This is a list of all of the tuning definitions currently
filling all_archs with wrong entries
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* using checksum without recipe/task name doesn't seem like good idea IMHO
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
"Package group" is a much more appropriate name for these than task,
since we use the word task to describe units of work executed by
BitBake.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This script makes it easy to run a systemtap script on a remote target
from a build host.
The script itself contains documentation on basic setup and usage -
see that for details. In a nutshell, if you have a systemtap script
on the build host, this script allows that systemtap script to be
compiled and run on the target host and for the output appear on the
host terminal.
The crosstap script requires to an sdk build of the target (or a build
with 'tools-profile' added to EXTRA_IMAGE_FEATURES) because it needs
to be able to run the native systemtap built by the systemtap recipe,
which in turn needs access to the kernel built for the target in order
to build the kernel modules that implement the systemtap probe
specified by the systemtap script and which ultimately get shipped to
the target and insmod'ed there.
The crosstap script also needs to be able to ssh to the target host in
order insert the modules on the target, so the target system needs to
support incoming ssh connections.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fix it for the downloaded sstate cache file
* The downloaded sstate cache file is in SSTATE_DIR, and there is a
symlink points to it, the sstate cache file should not be removed if
the corresponding symlink is kept, it would be removed when the
symlink is removed (with -L option).
* Fix a comment line.
[YOCTO #2897]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In a few places, we have scripts which use <rootfs>/var/pseudo for
the pseudo state directory controlling a given filesystem. This
seems possibly risky because it means that stuff running under
qemu or whatnot could wipe out the data being used to handle that
rootfs. Move this to:
<rootfs>/../$(basename_rootfs).pseudo_state
to avoid problems.
This also solves at least one case (not directly hit by yocto's
tree) wherein you could end up trying to remove a rootfs while
pseudo was using a database inside that rootfs, and thus the
remove would fail.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
|
|
Compiling tar-replacement or not is decided by version of host tar,
if the host tar version is lower than 1.23, Compiling tar-replacement
is needed.
When doing popoluate tar-replacement sysroot to write the tar to
sysroot, but writing is not finished. other packages probably
use the being written tar to unzip file, which will lead to failure
and report the below error:
"bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/tar: Text file busy"
Now we compile tar-replacement firstly to ensure that a being written
tar command will not be used.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The MACHINE/KERNEL Checks setup MACHINE is it's unset, the KVM checks valid
MACHINE is qemux86 or qemux86-64 and fail if it's unset!
[YOCTO #2970]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Handle the case during update where the configured branch is not
currently checked out in the component repository by just specifying
it in the places where it was not previously.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|