| Age | Commit message (Collapse) | Author | Files |
|---|
|
stty manual says :
"sane - Resets all modes to reasonable values for interactive terminal use."
But reasonable isn't the most viable solution, because we want to keep the
original stty settings before running runqemu. Saving the stty settings and
setting them at the end of the runqemu script solves the terminal
settings differences after the script ran.
[Yocto #4512]
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
[Added filename info in commit subject - sgw]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After switching from ifconfig to ip, networking stopped working. This
commit contains the following fixes:
* set a decent broadcast address for the tap device;
* bring up the device;
* add the route using ip tool instead of the old route tool;
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
runqemu script now takes argument "slirp" in order to
run networking on the qemu machine, without root privileges.
changed the runqemu-internal script in order not to activate
the tap devices if the option is set.
[YOCTO #1474]
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Currently the user sees ugly errors if git isn't installed, this patch
cleans up the code to correctly handle that case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
/tmp is a better location, and it allows copying files
on read only fs images
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes we need to change the timeout used by the function for
certain kinds of tests.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some tests might want to pass extra arguments to runqemu.
I can think of "kvm" or qemuparams="-m 1024" when we want extra muscle.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ifconfig and its ilk (net-tools package) is deprecated in favour of iproute2 package
and is now removed by many distro's e.g. Archlinux. So we replace ifconfig with ip utility
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Allow "hob" to receive other arguments in the command line (for example
the server type and the address of the remote end if running remotely).
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemuimage-testlib hardcodes ext3 as fs type. This adds support for more
images types which are supported by runqemu: ext[234]/jffs2/btrfs.
I've skipped (for now) vmdk (which qemu can boot) because:
- we don't have network on images without connman because of the way
runqemu starts vmdk images (can't pass kernel args for network config)
- qemuimage-testlib-pythonhelper relies on '192.168' being in the output of
ps to return the pid
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Don't check only for ext3 fstype, we can boot ext2 and ext4 just
as well.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Check for existence of specified buildhistory directory and show a
proper error message if it doesn't
* Show an error message instead of a traceback with a mangled revision
if one of the specified git revisions is invalid
* Show usage information if --help is specified
* Write error messages to stderr
Fixes [YOCTO #4313].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some automounters are rather overzealous and like to mount things
immediately after partitioning. This can happen if the disk is being
reused and the partitions align exactly with the existing partitions
which have already been formatted. Move the unmount code into a function
and call it before and after partitioning.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When using multilib, the hooks for lib32/lib64 must be different because
the libdir/base_libdir point to different locations. Postinstalls
calling postint_intercept script must pass the mlprefix in the 3rd
argument.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When all builds have finished write the hostname, commit and times
on a single line in the global results file (useful for merging later
on files from multiple systems).
Also the final cleaning should be last after writing the results.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When your proxy/network connection is unstable the network sanity test
which runs before every build (because we wipe all the files in the build dir)
can influence build time. Appending CONNECTIVITY_CHECK_URIS = ""
in local.conf will disable the check.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Some functions didn't used the same identation as the rest of them,
let's fix that.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Old versions of ldd (2.11) as run on some of the autobuilders end up running
commands like "LD_xxxx qemu-system-xxx" which this process detection code
would pick up and result in the wrong PID for qemu.
This changes the code to check for "192.168" in the command so we know
we're getting the correct one. This is less than ideal however we're
running out of options and resolves false negatives we see on the
autobuilder.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
With automounters abounding it makes more sense to attempt to unmount
the device rather than abort, just like ddimage does.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The distcc support is clearly unused and broken, might as well drop the
remaining code fragements.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch is the same as 6c22c591374d258228f74814cded34a24b4bf2d3,
but for x86-64 targets which exhibit the same problem.
Qemu update from 1.2 to 1.4 now allows for 16bit depth in guests,
whereby previously only 32bit depth was supported. However,
the new support is broken, so we force 32bit depth in all cases.
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Postinstalls that use qemu are throwing a segmentation fault when
building for qemux86-64 on a 64bit host (it might also happen for
qemux86 if building on a 32bit host but I didn't test). It looks like
qemu looks for ld.so.cache which is not found because it is generated
after rootfs_(rpm|ipk|deb)_do_rootfs is called and then it tries to load
libraries from the default paths (which are the host's). In order to
avoid this, pass the LD_LIBRARY_PATH explicitly to the target's dynamic
loader.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The dmesg test detects segfaults. This is useful information to have and if one
occurs in one of the earlier tests, this can aid debugging. Move the dmesg test to
the end of the list of tests so we gain the extra debug info in those cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
First strip $PATH of any existence of the paths needed by Open Embedded
and BitBake. Then add the needed paths at the beginning. This makes sure
the needed paths are searched first, without growing $PATH unnecessarily
if oe-init-build-env is rerun for a directory for which it has
previously been run.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If $PATH already has the needed paths at the beginning, there is no need
to add them again. This allows rerunning oe-init-build-env for the same
directory without having $PATH increase unnecessarily every time.
Signed-off-by: Peter Kjellerstedt <pkj@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Check after getting the original package name (e.g. undoing Debian
renaming) if there is a complementary package for that name, e.g. if
the glob is *-dev, then libudev0 -> libudev -> libudev-dev.
Fixes [YOCTO #4136].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As we've increased the parallelisation on the build servers, we've started to see
core-image-minimal sanity test boot failures where the network never comes up. We
don't see those failures for core-image-sato, its always minimal.
Looking at the results, it can take ~100 seconds for the network to come up,
even on the sato images if the machine has a high load. The timeout for the boot
test is only 120 seconds compared to 400 on every other test.
This change makes the timeout equal for all the tests at 400 seconds in the hope
that the load on the autobuilder is causing the sanity tests to run slowly and
hence triggering the false negatives.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <pkj@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a new function to scp from the target, and another to fetch
/var/log/messages and dump it to the console.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set StrictHostKeyChecking to no to silence the fingerprint warnings, and instead
of creating a temporary file for the known hosts and then deleting it just use
/dev/null.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We know the grep failed because the error case is being executed, so don't do
the grep again when attempting to help diagnose the problem, as seeing the full
process list might be useful.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intercept scripts fail to run on 32 bit hosts. Apparently, the
current approach worked on 64 bit hosts due to the larger virtual address
space (probably). On 32 bit hosts, however, calling the target binary like:
qemu-arm ld-linux.so --library-path /lib:/usr/lib arm_binary
fails with:
arm_binary: error while loading shared libraries: arm_binary: failed to
map segment from shared object: Operation not permitted
When run like this, qemu-arm fails to map the arm_binary executable in
memory because it's hitting the lower limit of
/proc/sys/vm/mmap_min_addr. That's because it loads the
ld-linux.so binary successfully, taking into account mmap_min_addr, runs
it, and then ld-linux.so will map the arm_binary at a fixed address but this
will fail because it is below mmap_min_addr. The qemu's guest base probing,
apparently, doesn't work fine when a program runs inside other.
One way around this would be to set mmap_min_addr to 0 (on recent
distributions is set to 65536 to avoid "kernel NULL pointer dereference"
defects) but this approach is not safe.
The other way is to call the binary directly but providing qemu with a
prefix (-L option) in order to find the elf interpreter correctly. This
way, both the target binary and dynamic loader are mapped into memory
under qemu's control and, only after, the dynamic loader is started.
[YOCTO #4179]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu-internal runs "ldd qemu-system xxx" and the detection code was returning this
as the PID of qemu. This patch improves the detection code to avoid this problem,
fixing certain race type failures on the autobuilder.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* usefull for jenkins jobs, which will otherwise fail
because 1 was returned
Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When trying to import python-pprint on a minimal image, it reports that
the cStringIO python module is missing.
This is provided with python-io, so we add python-io as runtime
dependency.
The complete observed trace was:
Python 2.7.3 (default, Apr 4 2013, 07:45:36)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pprint
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/pprint.py", line 40, in <module>
from cStringIO import StringIO as _StringIO
ImportError: No module named cStringIO
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Qemu update from 1.2 to 1.4 now allows for 16bit depth in guests,
whereby previously only 32bit depth was supported. However,
the new support is broken, so we force 32bit depth in all cases.
MUST_REVERT: on qemu update, if 16bit depth support is working ok
Fixes [YOCTO #3828]
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We are seeing timeouts on the autobuilder where qemu does start but the script
doesn't appear to be able to detect it in time. This patch increases the
timeouts since there seems little harm in doing so.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add another test to time bitbake -p with and without cache/ or tmp/cache.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fix revisions
Adds a -p option to allow cherry-picking of fix revisions.
Removes the final build/sstate directories to stop running out of space.
Runs subsequent tasks even if one test fails.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Append results from each run to a single file in order to keep a history.
Also do some cosmetic changes and fix some whitespace.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This script runs a series of builds (core-image-sato by default) with
and without sstate cache and collects some metrics (time and size currently).
It takes a commit as argument (-c <rev>) and measures wall clock for
bitbake core-image-sato and virtual/kernel.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Possibility to customize the text that is presented to the user when
they execute the script.
Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Tested-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Collect SRCREV information in a separate task and write it out in a
format which is more consistent with the rest of the buildhistory
output. Using a task means that SRCREV values will also be recorded for
native recipes and not just target ones, and the new formatting also
correctly handles multiple entries in SRC_URI.
Also adds scripts/buildhistory-collect-srcrevs which will report on all
of the recorded SRCREV values in a format suitable for use in global
configuration (e.g. local.conf or a distro inc file) to override AUTOREV
values to a fixed set of revisions. Example output:
# emenlow-poky-linux
SRCREV_machine_pn-linux-yocto = "b5c37fe6e24eec194bb29d22fdd55d73bcc709bf"
SRCREV_emgd_pn-linux-yocto = "caea08c988e0f41103bbe18eafca20348f95da02"
SRCREV_meta_pn-linux-yocto = "c2ed0f16fdec628242a682897d5d86df4547cf24"
# core2-poky-linux
SRCREV_pn-kmod = "62081c0f68905b22f375156d4532fd37fa5c8d33"
SRCREV_pn-blktrace = "d6918c8832793b4205ed3bfede78c2f915c23385"
SRCREV_pn-opkg = "649"
Some notes on using this script:
* By default only values where the SRCREV was not hardcoded (usually
i.e. AUTOREV was used) are reported - use the -a option to see all
SRCREV values.
* The output statements may not have any effect in the face of overrides
applied elsewhere; use the -f option to add the forcevariable override
to each output line to work around this.
* The script does not do any special handling for multiple machines;
however it does place a comment before each set of values specifying
which triplet they belong to as shown above.
Relates to [YOCTO #3041].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows error messages to be captured in the logs which is helpful.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
