| Age | Commit message (Collapse) | Author | Files |
|---|
|
Compiling tar-replacement or not is decided by version of host tar,
if the host tar version is lower than 1.23, Compiling tar-replacement
is needed.
When doing popoluate tar-replacement sysroot to write the tar to
sysroot, but writing is not finished. other packages probably
use the being written tar to unzip file, which will lead to failure
and report the below error:
"bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/tar: Text file busy"
Now we compile tar-replacement firstly to ensure that a being written
tar command will not be used.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The MACHINE/KERNEL Checks setup MACHINE is it's unset, the KVM checks valid
MACHINE is qemux86 or qemux86-64 and fail if it's unset!
[YOCTO #2970]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Handle the case during update where the configured branch is not
currently checked out in the component repository by just specifying
it in the places where it was not previously.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Expand the usage to be able to specify KERNEL and ROOTFS
on commandline. This helps in using the script for booting
images that are essentially not part of OE-Core
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Several fixes:
* We have put the sstate file to SSTATE_DIR/??/ currently, but the
sstate file on the SSTATE_MIRRORS or the obsolete one is still in
SSTATE_DIR/ (no subdir), update the script to support manage them.
* Remove the related ".done" file in the SSTATE_DIR.
* Add a "-L, --follow-symlink" which will remove both the symbol link and
the destination file
* Change the "ls -u file_list" (access time) to "ls -t file_list"
(change tiem), since the "ls -u" and readlink will change the
symlink's access time, which would make the result inconsistent.
A solution is save the access time before every "ls -u" and "readlink",
save it back after the command, but this would cause performance lost
since it needs check each file and modify the symlink's status. Use
the "-t" doesn't cause much different.
[YOCTO #2897]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is no longer necessary since we've dropped the GL passthrough patches.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The yocto-bsp tool generates kernels with additional strings within
the filename, e.g. zImage-myqemuarm.bin. Loosen the MACHINE detection
regex to work with these filenames.
Fixes [YOCTO #2890].
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Added support for booting ramfs-based images (e.g, poky-tiny) which
do not have block device support.
This fixes [YOCTO #2612].
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Update it for the new layout of sstate-cache.
Note: It doesn't handle the old sstate-cache/sstate-xxx.tgz (or
siginfo), the user should remove it manually (rm -fr
sstate-cache/sstate-* would be OK).
[YOCTO #2897]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
runqemu-if* now requires UID as a command line option which means
runqemu-gen-tapdevs needs to take it as an option.
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This script will be embedded in the SDK tarball and will be called by
the SDK installer. It replaces the interpreter path in all binaries and
it also changes the ld.so.cache and SYSDIRS in dynamic loader.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The switch statement does not fall through as the comment suggests.
This results in -a not implying -c as was intended.
Add the two lines from -c to -a to achieve the intended behavior.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Move scripts/rpm-createsolvedb.py to
meta/recipes-support/createrepo/createrepo/ since we should wrap it to
use the native python.
[YOCTO #2822]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Check for .packaged file and exclude packages if this file does not
exist - this avoids attempting to install empty packages during
complementary package installation within do_rootfs that didn't end up
being created (and failing as a result).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the local configuration is already split out, ensure the init action
works properly and does not error in the case that last_revision is not
set. Additionally, if the local configuration is within the repository,
prevent it from being committed and add it to .gitignore.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the current code, we're calling awk to do a floating point comparison
between '1.7.0.4' and '1.7.5' (on an ubuntu 10.04 LTS machine). These clearly
aren't proper floating point numbers, and the comparison is incorrect. It's
returning true for 1.7.0.4 >= 1.7.5.
Instead of using a floating point comparison for this, call out to python and
let it do it.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow splitting the local parts of the configuration (mostly
local_repo_dir and last_revision, although there is no limitation) to
a side-by-side -local.conf file, with component sections optionally
tagged with the combo layer branch name. This effectively allows you to:
* avoid polluting the history by committing the updated last revision
to the combo repository for every update
* avoid putting local repo paths into the combo repository
* manage multiple branches of the combo repository whilst avoiding the
possibility of mixing the configuration for one branch with another.
An example split configuration (note, values may be artificial):
------------------- combo-layer.conf -------------------
[bitbake]
src_uri = git://git.openembedded.org/bitbake
dest_dir = bitbake
hook = scripts/combo-layer-hook-default.sh
[oe-core]
src_uri = git://git.openembedded.org/openembedded-core
dest_dir = .
hook = scripts/combo-layer-hook-default.sh
--------------------------------------------------------
---------------- combo-layer-local.conf ----------------
[bitbake]
local_repo_dir = ../repos/bitbake
[oe-core]
local_repo_dir = ../repos/oe-core
[bitbake|master]
branch = master
last_revision = db689a99beffea1a285cdfc74a58fe73f1666987
[oe-core|master]
branch = master
last_revision = 121a1499a81706366acc0081272a6bff634d4d62
[bitbake|denzil]
branch = 1.12
last_revision = 24b631acdaa143a4de39c6e1328849660c66f219
[oe-core|denzil]
branch = denzil
last_revision = 741146fa90f28f7ce8d82ee7f7e254872d519724
--------------------------------------------------------
It is assumed that the local config file will be added to .gitignore.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user edits the configuration file by hand and sets last_revision,
we need to ensure that the revision is valid and on the specified
branch.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Ignore blank lines in patch list
* Don't fail in interactive mode if patch list is deleted
* Show patch counter
* Show relative path for patches
* Print headings before applying patch list for each component
Also change to using a "with" block to read the patch list so it gets
closed properly when we're finished.
Fixes [YOCTO #2455].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If applying a patch fails during the update process, drop to a shell
instead of exiting; at that point the user can manually apply the patch,
do nothing and "exit" to skip it, or "exit 1" to abort the process.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the dirty repo check somewhat less strict by ignoring old
patch directories created by this tool.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Add a -n option to disable component repo pull during update
* Add a 'pull' action to pull the component repos only
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
&> does not work with dash - use > xxxx 2>&1 instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use a similar mechanism that was previously used to install locales at
rootfs generation time to install other "complementary" packages (e.g.
*-dev packages) - i.e. install all of the explicitly requested packages
and their dependencies, then get a list of the packages that were
installed, and use that list to install the complementary packages. This
has been implemented by using a list of globs which should make it
easier to extend in future.
The previous locale package installation code assumed that the locale
packages did not have any dependencies that were not already installed;
now that we are installing non-locale packages this is no longer
correct. In practice only the rpm backend actually made use of this
assumption, so it needed to be changed to call into the existing package
backend code to do the complementary package installation rather than
calling rpm directly.
This fixes the doc-pkgs IMAGE_FEATURES feature to work correctly, and
also ensures that all dev/dbg packages get installed for
dev-pkgs/dbg-pkgs respectively even if the dependency chains between
those packages was not ensuring that already.
The code has also been adapted to work correctly with the new
SDK-from-image functionality. To that end, an SDKIMAGE_FEATURES variable
has been added to allow specifying what extra image features should go
into the SDK (extra, because by virtue of installing all of the packages
in the image into the target part of the SDK, we already include all of
IMAGE_FEATURES) with a default value of "dev-pkgs dbg-pkgs".
Fixes [YOCTO #2614].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
We require git version 1.7.5 or later for the git remote --mirror=xxx syntax.
If we have an older version of git, this patch ensure we build git-replacement-native.
We add an alternative PROVIDES in the same way as tar-native to allow this script
to trigger the build whilst still allowing git-native in ASSUME_PROVIDED.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When gl is disabled in PACKAGECONFIG then we dont need
to check for supporting libs to be present before running
qemu.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Dennis Lan <dennis.yxun@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
runqemu can fail to with the following message:
You need libGL.so and libGLU.so to exist in your library path to run the QEMU emulator.
Fedora package names are: mesa-libGL mesa-libGLU.
The libGL.so and libGLU.so files are provided by the mesa-libGL-devel
and mesa-libGLU-devel Fedora packages (yum provides '*/libGL*.so').
Signed-off-by: Cristian Ciupitu <cristian.ciupitu@yahoo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[Yocto 2579]
When set DISTRO to poky-tiny, only ext2 image is created. But
runqemu-internal doesn't set QEMUOPTIONS for ext2 image that make qemu
fail to boot.
Fix it for qemux86 arch since poky-tiny can only build for qemux86 now.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
|
|
Update the help text to tell user that the files and dirs under WORKDIR
which are not created by Yocto will be deleted.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
|
|
Some users may build for different archs under same workdir, so they
don't want to clean the dirs not related to current arch.
Run command 'bitbake -e' with selected packages to get the dirs related
to current arch then clean them.
Update the way to get the WORKDIR by parsing the IMAGE_ROOTFS by the
way.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
|
|
Use modules subprocess to run command instead of module commands.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
|
|
Update the way to check obsolete directories.
According to package and its version construct a list of all packages'
current build directory. If any directory under $WORKDIR/*/ is not in
the list will be removed.
At same time, all the files(vs. directory) under $WORKDIR and
$WORKDIR/*/ will be removed because they are not created by poky.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
|
|
* Fix teh output filename to make it easy to use
* Add a default output format (svg)
* Fix the usage message
* Fix the version to v1.0.0
Currently, the help messages are:
$ ./pybootchartgui.py --help
Usage: pybootchartgui.py [options] /path/to/tmp/buildstats/<recipe-machine>/<BUILDNAME>/
Options:
--version show program's version number and exit
-h, --help show this help message and exit
-i, --interactive start in active mode
-f FORMAT, --format=FORMAT
image format: svg, pdf, png, [default: svg]
-o PATH, --output=PATH
output path (file or directory) where charts are
stored
-s NUM, --split=NUM split the output chart into <NUM> charts, only works
with "-o PATH"
-n, --no-prune do not prune the process tree
-q, --quiet suppress informational messages
--very-quiet suppress all messages except errors
--verbose print all messages
[YOCTO #2403]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Split the output chart into multiple ones to make it more readable, it
only works with "-o path", which means that it doesn't work if the user
doesn't want to save the chart to the disk. For example:
$ ./pybootchartgui.py /path/to/tmp/buildstats/core-image-sato-qemux86/201205301810/ -f svg -s 5 -o /tmp/
bootchart written to /tmp/bootchart_1.svg
bootchart written to /tmp/bootchart_2.svg
bootchart written to /tmp/bootchart_3.svg
bootchart written to /tmp/bootchart_4.svg
bootchart written to /tmp/bootchart_5.svg
[YOCTO #2403]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
The original patch is from Richard, I rebased it to the up-to-date
upstream code, here are the original messages from him:
We have just merged Beth's initial buildstats logging work. I was
sitting wondering how to actually evaluate the numbers as I wanted to
know "where are we spending the time?".
It occurred to me that I wanted a graph very similar to that generated
by bootchart. I looked around and found pyboootchartgui and then hacked
it around a bit and coerced it to start producing charts like:
http://tim.rpsys.net/bootchart.png
which is the initial "pseudo-native" part of the build. This was simple
enough to test with.
I then tried graphing a poky-image-sato. To get a graph I could actually
read, I stripped out any task taking less than 8 seconds and scaled the
x axis from 25 units per second to one unit per second. The result was:
http://tim.rpsys.net/bootchart2.png
(warning this is a 2.7MB png)
I also added in a little bit of colour coding for the second chart.
Interestingly it looks like there is more yellow than green meaning
configure is a bigger drain on the build time not that its
unexpected :/.
I quite enjoyed playing with this and on a serious note, the gradient of
the task graph makes me a little suspicious of whether the overhead of
launching tasks in bitbake itself is having some effect on build time.
Certainly on the first graph there are some interesting latencies
showing up.
Anyhow, I think this is the first time bitbake's task execution has been
visualised and there are some interesting things we can learn from it.
I'm hoping this is a start of a much more detailed understanding of the
build process with respect to performance.
[YOCTO #2403]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
This is from:
http://pybootchartgui.googlecode.com/files/pybootchartgui-r124.tar.gz
Will modify it to make the build profiling in pictures.
Remove the examples since they would not work any more, and they cost
much disk space.
[YOCTO #2403]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
This allows core-image-sato to access the WAN.
Thanks to Dexuan Cui for proposing this fix.
Fixes [YOCTO #2329]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The os.popen function would fail (more or less) silently if the executed
program cannot be found, and here what we need is os.system not os.popen
since it doesn't use the return value, use os.unlink() and ignore
exceptions from it would be better as Chris suggested.
[YOCTO #2454]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Currently we copy the aclocal directory to the build so that autotools
doesn't see .m4 files disappear when its processing them. This can happen
if for example, package X is being rebuilt at the same time as Y and it
gets uninstalled from sstate (assuming there are no dependencies between
X and Y). This code making the copy was added to avoid races but introduces
a race of its own, namely that the files can disappear during the copy.
This patch adds a cp-noerror script which silently ignores such errors
and gives the behaviour we need in this case. It hence fixes issues which
crop up for users and the autobuilder occasionally.
[YOCTO #2485]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Display an error if the user does not have at least version 0.3.1 of
GitPython installed.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace os.system with subprocess.call since the older function would
fail (more or less) silently if the executed program cannot be found
More info:
http://docs.python.org/library/subprocess.html#subprocess-replacements
[YOCTO #2454]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New machines need to be added and they also
have different kernel commandlines
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The script is used to address build issues when tasks of different
recipes are re-executed. The script goes through all available recipes
and their tasks. The test results are saved in ./reexeclogs. Force build
logs are saved with prefix "force". Build failure logs are saved with
prefix "failed".
[YOCTO #2123]
Signed-off-by: Jiajun Xu <jiajun.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The =~ operator is not one of my favorites, not just due to portability
issues, but because it's not well known, and a lot of people might
not expect a regex operator.
The canonical shell idiom for this is to use case with alternation
and wildcards. As a side note, if you are matching anything containing
core-image-sato, you don't need to also check for core-image-sato-sdk.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
autobuilder scritpts
The BITBAKEDIR change does not work well when the script is sourced from another script
since $2 may be unrelated. This change adds the logic onto the BDIR conditional and
which more external scripts would set, hence avoiding the problem.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Having bitbake inside the oe-core is annoying to some people. This commit
adds a second option to the oe-init-build-env script.
Run like this:
. ./oe-init-build-env ../build ../bitbake
for example. Without the second option, the old behavior is preserved.
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now runs with dash and busybox' ash as well as with bash
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
