summaryrefslogtreecommitdiff
path: root/scripts/runqemu
AgeCommit message (Collapse)AuthorFiles
2018-08-15runqemu: exit gracefully with an error message if qemu system is not evaluatedJagadeesh Krishnanjanappa1
It solves below error: -- snip -- return 'qemu-system-%s' % qbsys UnboundLocalError: local variable 'qbsys' referenced before assignment -- snip -- [YOCTO #12846] Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-07-26logging: use warning instead warnChen Qi1
The warn method is deprecated. We should use the documented warning instead. Quoting from the python's official doc: """ Note: There is an obsolete method warn which is functionally identical to warning. As warn is deprecated, please do not use it - use warning instead. """ Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-07-10scripts/runqemu: fix qemumips qemumips64 memory detection kernel panicHe Zhe1
$ runqemu qemumips64 core-image-minimal nographic qemuparams="-m 512" ... [ 0.000000] Call Trace: [ 0.000000] [<ffffffff801268c0>] clear_page+0x0/0x128 [ 0.000000] [<ffffffff80238158>] get_page_from_freelist+0xab8/0xc00 [ 0.000000] [<ffffffff80238964>] __alloc_pages_nodemask+0xdc/0xf68 [ 0.000000] [<ffffffff80239808>] __get_free_pages+0x18/0x70 [ 0.000000] [<ffffffff80122a4c>] setup_zero_pages+0x1c/0xb8 [ 0.000000] [<ffffffff80c7c998>] mem_init+0x54/0xa0 [ 0.000000] [<ffffffff80c74904>] start_kernel+0x204/0x4d8 [ 0.000000] [<ffffffff8091dfb0>] kernel_entry+0x0/0x40 [ 0.000000] Code: 02002025 1000f8d9 8e634d7c <34860f80> cc9e0000 cc9e0020 cc9e0040 cc9e0060 cc9e0080 [ 0.000000] [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ... OE uses qemumips to simulate a Malta board by default. As upstream qemu introduced: https://git.qemu.org/?p=qemu.git;a=commit;h=94c2b6aff43cdfcfdfb552773a6b6b973a72ef0b The Malta board can support up to 2GiB of RAM which should be able to boot a Linux kernel built with CONFIG_HIGHMEM enabled and passing "-m 2048" to QEMU and appending the following kernel parameters: ... mem=256M@0x0 mem=256M@0x90000000 mem=1536M@0x20000000 ... But the following commit in kernel broke above mem=X@Y setting which added the memory as reserved memory area. https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=73fbc1eba7ffa3bf0ad12486232a8a1edb4e4411 ... commit 73fbc1eba7ffa3bf0ad12486232a8a1edb4e4411 Author: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Date: Wed Nov 23 14:43:49 2016 +0100 MIPS: fix mem=X@Y commandline processing ... So remove `mem=*' to disable user-defined physical RAM map which let kernel itself caculates memory ranges. Author: Hongxu Jia <hongxu.jia@windriver.com> [ Merge the two fixes for qemumips32 and qemumips64 into one patch, and make it support all mips cases ] Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-18runqemu: add SIGTERM handler to make sure things are cleaned upChen Qi1
Add SIGTERM handler so that runqemu could clean things up correctly when receving such signal. This problem was originally observed when running testimage. On some hosts, after running testimage task, the user has to manually operate on the tap interface (e.g. `sudo ip link del tap0') in order for the next runqemu command to launch successfully. The problem is about runqemu, SIGTERM and network manager on the host. In testimage task, the runqemu process will receive SIGTERM. In such situation, its cleanup() function is not run, resulting in tap interface not cleaned up. On some hosts, the network manager will bring down the tap interface automatically, thus this problem. I saw this problem on Fedora21. I think we'd better just clean up the tap interface ourselves. So this patch adds to runqemu a SIGTERM handler, in which the actual qemu process is terminated and other things cleaned up. Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-01-02runqemu: Add workaround for APIC hang on pre 4.15 kernels on qemux86Richard Purdie1
On pre 4.15 host kernels, an APIC window emulation bug can cause qemu to hang. On 64 bit we can use the x2apic, for 32 bit, we just have to disable the other timer sources and rely on kvm-clock. [YOCTO #12301] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-12-02runqemu: Allow the user to override the device tree optionAlistair Francis1
Update the runqemu script to allow the user to specify a device tree to boot when calling runqemu. This involves creating a seperate check_dtb() function incase the user has specified 'none' for the kernel but still wants a device tree. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Ben Levinsky <ben.levinsky@xilinx.com> Cc: Ben Levinsky <ben.levinsky@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-12-02runqemu: Allow the user to override the Kernel optionAlistair Francis1
Update the runqemu script to allow the user to specify a Kernel to boot when calling runqemu. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Ben Levinsky <ben.levinsky@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-11-29runqemu: print command search result when not foundRobert Yang1
This makes debug easier. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-11-21runqemu: Also specialcase resolution of '.' to the file's locationRichard Purdie1
Similarly to handling "../", handle "." to resovle to the qemuconf file's current directory. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-11-21runqemu: Improve relative path handling in qemuconf filesRichard Purdie1
If a variable starts with "../", its likely its a path and we want to set it to an absolute path relative to the qemuconf file. This means we don't have to use bitbake as often to figure out variables. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-11-21runqemu: Ensure we process all tap devicesRichard Purdie1
The regexp in the script misses some tap devices, e.g. we see output like: runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap25.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap26.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap27.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap28.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap40.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap41.lock failed: [Errno 11] Resource temporarily unavailable What happened to tap29 to tap39? The issue is was we were missing devices with '0' in the number, like "10:" and so on in the output from "ip link". Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-11-05runqemu: correct rootfs setup to boot an ide hddimgThomas Perrot1
vm_drive variable is malformed when the drive type is an ide device. Signed-off-by: Thomas Perrot <thomas.perrot@tupi.fr> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-11-05runqemu: Add riscv support for qemu machinesKhem Raj1
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-08-29scripts/runqemu: Don't print error messages about tap file locksRichard Purdie1
Errors like: runqemu - ERROR - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock failed: [Errno 11] Resource temporarily unavailable are not really fatal errors. Change these to info messages instead so people look later in the log for the real errors. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-08-23runqemu: Use virtio to mount cdrom drivesRichard Purdie1
The IDE driver in the kernel is fragile and in 4.12 is causing backtraces. To unblock 4.12 kernel merging use the virtio CD driver instead to mount iso images which should be faster and more stable. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-07-30image: Convert vmdk/vdi/qcow2 to strict CONVERSION_CMD typesTom Rini1
The vmdk/vdi/qcow2 IMAGE_FSTYPEs predate wic. As such, they provide some similar underlying functionality in order to produce a "disk" image that in turn can be converted into different formats that various hypervisor types work with. They do not however provide the ability for other disk image types to be converted into these same output types. Furthermore, they are less flexible than what wic does provide. This drops the old style vmdk/vdi/qcow2 types and re-introduces them under the CONVERSION_CMD framework. The equivalent of vmdk is now wic.vmdk and so forth for the other types. Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-07-27runqemu: chmod 0o777 for lockdirRobert Yang1
Multi-users may run qemu on the same host, all of them should be able to create or remove lock in lockdir, so set lockdir's mode to 0o777. Note, os.mkdir()'s mode is default to 0o777, but the current umask value is first masked out, so use os.chmod() to set it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-07-27runqemu: validate combosRobert Yang1
Error out ealier if the combos is invalid, e.g.: $ runqemu tmp/deploy/images/qemux86/bzImage-qemux86.bin tmp/deploy/images/qemux86/core-image-minimal-qemux86.wic This will fail at kernel panic, no we check and error out early. We can add other checkings in the future. [YOCTO #11286] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-07-27runqemu: check tar.bz2 and .tar.gzRobert Yang1
Handle them as nfs, so that cmd like the following can be boot: $ runqemu tmp/deploy/images/qemux86/core-image-minimal-qemux86.tar.bz2 [YOCTO #11286] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-07-27runqemu: check qbconfload before running bitbakeRobert Yang1
If qbconfload (.qemuboot.conf is found) is present, we can get DEPLOY_DIR_IMAGE from it rather than "bitbake -e". Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-07-27runqemu: add --debug and --quietRobert Yang1
And move some debug info into logger.debug(), this can make it easy to read key messages like errors or warnings. I checked meta/lib/oeqa/ they don't depend on these messages. And I have run "oe-selftest -a", it doesn't break anything. [YOCTO #10474] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2017-07-17runqemu: check exit code of 'ls -t'Ed Bartosh1
Used check_output instead of Popen as it raises CalledProcessError exception when command exits with non-zero exit code. Catched the exception to produce user-friendly output. [YOCTO #11719] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-07-17runqemu: reworked exception handlingEd Bartosh1
Introduced custom RunQemuException that script raises on known errors. This exception is handled in one place and prints error output without printing Python traceback. This shoud make error output less scary for the end user. Handling of unknown errors has not been changed - both error and traceback will be printed. Reimplemented OEPathError exception code to handle it similarly to RunQemuException. Moved exception handling code into main() to keep it in one place. [YOCTO #11719] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-06-27runqemu: drop RPC portsRobert Yang1
The following commit has removed rpc ports from runqemu-export-rootfs, so runqemu should also remove them, otherwise "runqemu nfs" doesn't work. And use abspath for nfsroot, otherwise it doesn't work when it is a relative path. commit 6bb9860ef7ba9c84fe9bd3a81aa6555f67ebd38e Author: Cody P Schafer <dev@codyps.com> Date: Tue Jun 6 18:30:49 2017 -0400 runqemu-export-rootfs: don't change RPC ports [YOCTO #11687] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-06-14runqemu: change terminal settings for valid tty'sMikko Ylinen1
runqemu uses stty to change terminal settings to give users better control to qemu. However, stty does not work when runqemu is run directly or indirectly via oe-selftest in a Docker container (presumably some problems with Docker's pseudo-tty implementation). The error reported is: stty: 'standard input': Inappropriate ioctl for device As runqemu recently moved to subprocess.check_call() for stty calls we now get thrown an error and all runqemu runs fail. sys.stdin.isatty() does proper job in detecting if the stty calls can work so we use that check before running the stty subprocess operations. Signed-off-by: Mikko Ylinen <mikko.ylinen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-06-03scripts: Fix return value checks from subprocess.call()'sMikko Rapeli1
Python function subprocess.call() returns the return value of the executed process. If return values are not checked, errors may go unnoticed and bad things can happen. Change all callers of subprocess.call() which do not check for the return value to use subprocess.check_call() which raises CalledProcessError if the subprocess returns with non-zero value. https://docs.python.org/2/library/subprocess.html#using-the-subprocess-module All users of the function were found with: $ git grep "subprocess\.call" | \ egrep -v 'if.*subprocess\.call|=\ +subprocess\.call|return.*subprocess\.call' Tested similar patch on top of yocto jethro. Only compile tested core-image-minimal on poky master branch. Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-05-29runqemu: output qemu-system errorsEd Bartosh1
Included error output from qemu-system into the runqemu error message. Made error output more visible by printing new line before it. [YOCTO #11542] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-05-16runqemu: Automatically add a TFTP directory for slirp bootAlistair Francis1
When booting QEMU with slirp networking we want to use QEMUs TFTP server to make the images in deploy accessible to the guest. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-04-28runqemu: support virtio drive typePatrick Ohly1
Setting QB_DRIVE_TYPE=/dev/vd selects virtio without triggering any warnings. Previously, that was only possible by setting an unknown value and relying on the fallback to virtio, which caused some warnings to be printed. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-04-19runqemu: fix incorrect calls to get variable valuesPaul Eggleton1
We were specifying a default parameter; the get() function defined here does not take such a parameter. I appears this code had not been tested. This fixes runqemu erroring out immediately when used within the eSDK. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-12runqemu: use bindir_native property to run ifup/down scriptsEd Bartosh1
Used self.bindir_native to point out to the native sysroot when running runqemu-ifup and runqemu-ifdown scripts. [YOCTO #11266] [YOCTO #11193] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-12runqemu: add bindir_native propertyEd Bartosh1
Isolated logic of getting path to native bin directory in new bindir_native property method. This property is going to be used to obtain location of qemu-sytem and tunctl. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-12runqemu: get qemu from qemu-helper-native sysrootEd Bartosh1
If rm_work is enabled image native sysroot can be removed. This makes runqemu to fail trying to find qemu binary. Used native sysroot of qemu-helper-native to find system qemu binary. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-11runqemu: use self.rootfs to replace self.nfs_dirRobert Yang1
We can use self.rootfs as self.nfs_dir when self.fstype is nfs, this can reduce the code's complexity and we can re-use the code of checking ROOTFS conflictions. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-11runqemu: do not rely on grepping imagesRobert Yang1
Fixed when the image is large and not enough memory: grep: memory exhausted Aborted [YOCTO #11073] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-11runqemu: run without argumentsRobert Yang1
Since we can get MACHINE and others from env vars and "bitbake -e", "runqemu" can work without any arguments. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-11runqemu: support env vars explicitlyRobert Yang1
Use self.env_vars to support get vars from environment explicity. The MACHINE, ROOTFS and KERNEL was supported by shell based runqemu, and the help text says support them from env vars, so add them back. [YOCTO #11141] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-07runqemu: use realpath for imgdirRobert Yang1
The DEPLOY_DIR_IMAGE maybe relative or absolute path since it can be read from env vars, so use realpath for both imgdir and DEPLOY_DIR_IMAGE when compare. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-04-06runqemu: fix 2 typosRobert Yang1
* "is it" -> "it is" * Remove "<image>.qemuboot.conf =" in the error message which looked strange. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-21runqemu: output network configurationEd Bartosh1
runqemu adds network configuration parameters to the kernel command line to configure guest networking. This works only for the images that run with external kernel using qemu -kernel parameter. It doesn't work for the images that use bootloader to boot kernel as -kernel parameter is not used and network configuration is not possible to get. Added host and guest ip addresses and netmask of tap link to the runqemu output. This should allow external programs that execute runqemu to get network configuration. [YOCTO #10833] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-16runqemu: only boot ramfs when specifiedRobert Yang1
This can fix a problem: IMAGE_FSTYPES += "iso" $ bitbake core-image-minimal $ runqemu qemux86 It may boot core-image-minimal-initramfs rather than core-image-minimal, this is not what we want usually. This patch makes it avoid booting ramfs when there are other choices, or when it is specified, for example, "runqemu qemux86 ramfs" Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-16runqemu: add -h and --helpRobert Yang1
Fixed: $ runqemu -h runqemu - INFO - Assuming MACHINE = -h runqemu - INFO - Running MACHINE=-h bitbake -e... [snip] Exception: FSTYPE is NULL! [YOCTO #10941] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-16runqemu: improve when no machine specifiedRobert Yang1
Fixed: $ runqemu core-image-minimal [snip] Exception: FSTYPE is NULL! [snip] Get DEPLOY_DIR_IMAGE from "bitbake -e" to make it work. [YOCTO #10471] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-16runqemu: independent network and rootfs setupJuro Bystricky1
Presently, runqemu sets up rootfs as part of network setup. In case there is no network desired we will end up without rootfs as well. This patch sets up network and rootfs independently. It is also possible to bypass setup of rootfs if QB_ROOTFS is set to "none". Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-04scripts/runqemu: avoid overridden user input for bootparamsDmitry Rozhkov1
Currently runqemu hardcodes the "ip=" kernel boot parameter when configuring QEMU to use tap or slirp networking. This makes the guest system to have a network interface pre-configured by kernel and causes systemd to fail renaming the interface to whatever pleases it: Feb 21 10:10:20 intel-corei7-64 systemd-udevd[201]: Error changing net interface name 'eth0' to 'enp0s3': Device or resource busy, Always append user input for kernel boot params after the ones added by the script. This way user input has priority over runqemu's default params. Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-03-04scripts/runqemu: Add always ttyS1 when no serial options are specifiedAníbal Limón1
We always wants ttyS0 and ttyS1 in qemu machines (see SERIAL_CONSOLES), if not serial or serialtcp options was specified only ttyS0 is created and sysvinit shows an error trying to enable ttyS1: INIT: Id "S1" respawning too fast: disabled for 5 minutes [YOCTO #10491] (From OE-Core rev: 3a0efbbe6bb5a7f0fb3df0f6052b11e56788405f) Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-02-28runqemu: support UEFI with OVMF firmwarePatrick Ohly1
In the simplest case, "runqemu qemux86 <some-image> qcow2 ovmf" for an EFI-enabled image in the qcow2 format will locate the ovmf.qcow2 firmware file deployed by the ovmf recipe in the image deploy directory, override the graphics hardware with "-vga std" because that is all that OVMF supports, and boot with UEFI enabled. ovmf is not built by default. Either do it explicitly ("bitbake ovmf") or make it a part of the normal build ("MACHINE_ESSENTIAL_EXTRA_RDEPENDS_append = ' ovmf'"). The firmware file is activated as a flash drive instead of using the qemu BIOS parameters, because that is the recommended method (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=764918#47) as it allows storing UEFI variables in the file. Instead of just "ovmf", a full path to an existing file can also be used, just as with the rootfs. That may be useful when making a permanent copy of the virtual machine data files. It is possible to specify "ovmf*" parameters more than once, then each parameter creates a separate flash drive. This way it is possible to use separate flash drives for firmware code and variables: $ runqemu qemux86 <some-image> qcow2 ovmf.code ovmf.vars" Note that rebuilding ovmf will overwrite the ovmf.vars.qcow2 file in the image deploy directory. So when the goal is to update the firmware while keeping variables, make a copy of the variable file and use that: $ mkdir my-machine $ cp tmp/deploy/images/qemux86/ovmf.vars.qcow2 my-machine/ $ runqemu qemux86 <some-image> qcow2 ovmf.code my-machine/ovmf.vars.qcow2 When Secure Boot was enabled in ovmf, one can pick that instead of the non-Secure-Boot enabled ovmf.code: $ runqemu qemux86 <some-image> qcow2 ovmf.secboot.code my-machine/ovmf.vars.qcow2 Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
2017-02-28runqemu: also accept -image suffix for rootfs parameterPatrick Ohly1
The magic detection of the rootfs parameter only worked for image recipes which embedd the "image" string in the middle, as in "core-image-minimal". Sometimes it is more natural to call an image "something-image". To get such an image detected by runqemu, "-image" at the end of a parameter must also cause that parameter to be treated as the rootfs parameter. Inside the image directory, "something-image" has an -<arch> suffix and thus no change is needed for those usages of re.search('-image-'). However, while at it also enhance those string searches a bit (no need for re; any()+map() a bit closer to the intended logic). Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
2017-02-28runqemu: fix undefined variable reference in check_arg_path()Patrick Ohly1
'arg' isn't defined, the right name there is 'p'. This fixes a rather obscure error message when that code path ends up being taken: $ runqemu some/existing-file-name runqemu - ERROR - name 'arg' is not defined runqemu - ERROR - Try 'runqemu help' on how to use it Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
2017-02-02scripts/runqemu: fix a typoMing Liu1
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 07:56:46 +0000