| Age | Commit message (Collapse) | Author | Files |
|---|
|
Fixed wrong name for the first argument in class methods.
Pylint complains about the issue this way:
Class method should have 'cls' as first argument
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added short explanation of how to create empty pattition
to the 'wic help kickstart' output.
[YOCTO #7131]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It turns out that scp can't be used to copy symlinks because it follows
them instead of copying them, and this is by design (since it emulates
rcp which also behaved this way); the unfortunate result is that
symlinks that point to valid files on the host translate into the host
file being copied to the target (yuck). The simplest alternative that
does not have this undesirable behaviour is to use tar and pipe it over
ssh.
At the same time, it would be even better if we properly reflect file
permissions and ownership on the target that have been established
within the pseudo environment. We can do this by executing the copy
process under pseudo, which turns out to be quite easy with access to
the pseudo environment set up by the build system.
Fixes [YOCTO #7868].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
* It turns out that not all versions of the file command support the -E
option - the version in Ubuntu 14.04 doesn't support it for example.
This option is supposed to force file to return an error if the file
can't be opened - since we can't rely upon it then fall back to
looking at the output instead. (The results of this issue were simply
that we didn't notice if the file was executable and give a warning,
which tripped an oe-selftest failure - so it was minor.)
* If we receive an error there's not much point looking at the output to
see what type was returned because there wasn't one.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Add a long description and tweak some of the argument descriptions so
that it's clearer what the appendfile subcommand does and how it works.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Use DevtoolError exception more widely for handling error cases. This
exception is now caught in the main script and raising it can be used to
exit with an error. This hopefully simplifies error handling. The
change also makes exit codes more consistent, always returning '1' when
an error occurs.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Continue refactoring of update_recipe() by splitting out the 'patch'
mode into a separate function.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Refactor update_recipe() (i.e. the implementation of the update-recipe
command) by splitting out the 'srcrev' into a distinct function.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Just refactor the code.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
A slight simplification of the code.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Split out the logic of determining "initial rev" and "update rev" into a
separate function.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
bootloader --ptable option has two valid choices: gpt and msdos
Moved this check to wks parser by changing option type to 'choice'.
Removed similar checks from 5 other places.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added help for two wks partition options specific to
GUID partition table and globally unique identificators (GUID).
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Used --use-uuid option for root partition in directdisk-gpt.wks
This is useful to have example of image with UUID support.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Set type GUID and UUID for partition using sgdisk utility.
Type GUID can be specified for partition in .wks with
--part-type option.
UUID is generated when --use-uuid option is specified for
partition.
[YOCTO #7716]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
With this parameter it's possible to pass generated UUID
into Image class to set it for partition when it's created.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Replaced DirectImageCreator._get_boot_config private method
with a 'rootdev' property.
Simplified the code and API.
Used 'uuid' property instead of incorrectly used 'part_type'.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
wic crashes with "TypeError: %d format: a number is required, not str"
Due to incorrect format used for Wic_PartData.extra_size attribute.
Using %s instead of %d should fix the crash.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
'uuid' attribute of partition object is set to generated uuid
when --use-uuid option is used for partition in .wks file.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added --use-uuid option to the configuration of wks parser.
Processing of this option will be implemented in the following
commits.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed some pylint findings in partitionedfs.py
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There is no need for yet another wrapper around exec_native_cmd.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Checked for return code and output of native commands
inside exec_native_cmd.
Removed similar code from a lot of places where
exec_native_cmd is called.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These functions are not used anywhere.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
directdisk-gpt is the same as directdisk with only one difference:
it uses GPT partition table.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
create mode 100644 scripts/lib/image/canned-wks/directdisk-gpt.wks
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Names with one leasding underscore considered protected in Python.
_ptable_format is accessed outside of its class.
Made it public by removing underscore.
This pylint warning should be fixed now:
Access to a protected member _ptable_format of a client class
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Used proper syslinux MBR gptmbr.bin for GPT partitons.
Added check for unsupported partition formats.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Only msdos partition table format was supported by wic source
plugins.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Specifying partition type(GUID) makes sense for gpt partition table.
Current code checks if part-type is specified and throws exception
if it is. This makes sense to do only for msdos partition table.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This flag is used to tell special purpose software that
the GPT partition may be bootable.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
All wic exceptions are now inherited from new base exception
class WicError. It makes them easy to maintain and catch.
Processing of exceptions is done this way:
Known wic exceptions cause wic to print error message to stdout.
Unknown exceptions are not catched anymore and produce standard
python traceback.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bunch of os.remove calls were added to the partition.py lately.
They're causing wic to fail with OSError: [Errno 2] No such file or directory
if file doesn't exist.
Added check for file existence to all recently added calls of
os.remove. That should fix this regression.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Quite often what you want to do having made customisations to a piece of
software is to apply those customisations in your own layer rather than
in the original recipe. Thus, add a -a/--append option to the
update-recipe subcommand which allows you to specify the layer to write
a bbappend into. The bbappend will be created at the appropriate path
within the specified layer directory (which may or may not be in your
bblayers.conf) or if one already exists it will be updated
appropriately.
(This re-uses code written for recipetool appendfile.)
Implements [YOCTO #7587].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Locating which recipe provides a file in an image that you want to
modify and then figuring out how to bbappend the recipe in order to
replace it can be a tedious process. Thus, add a new appendfile
subcommand to recipetool, providing the ability to create a bbappend
file to add/replace any file in the target system. Without the -r
option, it will search for the recipe packaging the specified file
(using pkgdata from previously built recipes). The bbappend will be
created at the appropriate path within the specified layer directory
(which may or may not be in your bblayers.conf) or if one already exists
it will be updated appropriately.
Fairly extensive oe-selftest tests are also provided.
Implements [YOCTO #6447].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Most of the time when bb.note() gets called we want to see the output,
so ensure the level is set appropriately depending on the command line
options instead of being fixed at warning. (We don't want to see the
notes for fetch/unpack/patch though as they are too verbose).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove intermediate partitions that may have been created by a previous
wic invocation. Those partitions are causing issues on some systems. In
particular vfat partition creation is hanging on mcopy execution on
Fedora.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using tinfoil here is quicker and tidier than shelling out to
bitbake -e and interpreting its output.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If we execute an external command, we ought to prepare for the
possibility that it can fail and handle the failure appropriately. We
can especially expect this to happen when running bitbake in this
scenario. Ensure we return the appropriate exit code to the calling
process.
Fixes [YOCTO #7757].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Before this change, all files from the recipe (SRC_URI), including
patches, were added to to srctree repository when S==WORKDIR. The patch
files are useless as they are automatically applied on top of the
srctree by devtool.
This change causes devtool extract to not commit these unnecessary (and
possibly confusing) patch file(s) into srctree repository.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
After OE-Core commit 67db7182faf6742b0d971d61d8c5ba34f69d2e12, PV is
appended to the end of the gcc-source PN, thus we need to handle that in
devtool and the corresponding test.
Part of the fix for [YOCTO #7729].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The wic plugin creates a disk image containig one ext2/3/4 partition.
No additional boot partition is required. Syslinux is installed into
the image. The target device is a legacy BIOS PC.
Purpose of this plugin:
Other avaliable plugins create a fat partition for /boot and an ext
partition for rootfs. Current linux-yocto kernel packages are not
compatible with this disk layout. The boot partition is not mounted
by default, hence the kernel is installed into rootfs and not into
boot partition. A kernel update ends up in a bricked device. The old
kernel which is still in boot likely does not even boot with updated
kernel modules from /. Even if the boot partition is mounted during
the kernel update the update will fail. The kernel package installs
a symbolic link which is not supported by the fat partition.
Creating just one ext partition for boot and rootfs solves all issues
related to package based kernel updates on the device.
The plugin depends on syslinux-nomtools a user space installer for
syslinux on ext filesystems.
Thanks to Robert Yang who implemented syslinux-nomtools and supported
the implementation of this plugin.
Signed-off-by: Adrian Freihofer <adrian.freihofer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Provide a means to set SRCREV immediately by using rev= in the URI; if
it is specified then it is removed before setting SRC_URI and SRCREV is
set to the same value instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
