| Age | Commit message (Collapse) | Author | Files |
|---|
|
Added kickstart file to produce partitioned image for
MPC8315 reference hardware.
[YOCTO #8719]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added new option --fixed-size to wks. The option can be used to indicate
the exact size of a partition. The option cannot be added together with
--size, in which case an error will be raised. Other options that
influence automatic partition size (--extra-space, --overhead-factor),
if specifiec along with --fixed-size, will raise an error.
If it partition data is larger than the amount of space specified with
--fixed-size option wic will raise an error.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When using devtool modify on the kernel, we have to do a bit of a dance
with tinfoil instances because we only find out that we're working on a
kernel recipe after tinfoil is initialised, but then we need to build
kern-tools-native which we're doing just by running bitbake directly.
With the tinfoil2 changes, a datastore for the recipe that we were
keeping around across the opening and closing of tinfoil is no longer
able to be used. Re-parse the recipe to avoid this problem.
(In future this whole thing will be able to be done in the same tinfoil
instance thanks to tinfoil2, but that refactoring is yet to be done.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently wic looks for wks files in
<layer dir>/scripts/lib/wic/canned-wks/ directories.
This path is too nested and doesn't look consistent with the
naming scheme of layer directories.
Added <layer>/wic directory to the list of paths
to look for wks files.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When no --size is specified for the rootfs in the .wks, we want to obey the
rootfs size from the metadata, otherwise the defined IMAGE_ROOTFS_EXTRA_SPACE
and IMAGE_OVERHEAD_FACTOR will not be obeyed. In some cases, this can result
in image construction failure, if the size determined by du was insufficient
to hold the files without the aforementioned extra space.
This fallback from --size to ROOTFS_SIZE was already implemented when
--rootfs-dir is specified in the .wks, but it did not occur otherwise, neither
when --rootfs-dir= was passed to `wic create` nor when IMAGE_ROOTFS was used.
This made a certain amount of sense, as this fallback logic happened at such
a level that it wasn't able to identify which partitions were rootfs
partitions otherwise. Rather than doing it at that level, we can do it in
prepare_rootfs(), which is run by the rootfs source plugins.
Note that IMAGE_OVERHEAD_FACTOR and a --overhead-factor in the .wks will now
both be applied when --size isn't specified in the .wks. A warning is added
about this, though a user won't see it unless wic fails or they examine the
do_image_wic log.
Fixes [YOCTO #10815]
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
getVarFlag() now defaults to expanding by default, thus remove the
True option from getVarFlag() calls with a regex search and
replace.
Search made with the following regex:
getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Using the setVariable commands here followed by buildFile will result in
"basehash mismatch" errors, and that's expected since we are deviating
*at runtime* from what was previously seen by changing these variable
values. Set BB_HASH_IGNORE_MISMATCH to turn off the errors.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Extracting the source for a recipe (as used by devtool's extract, modify
and upgrade subcommands) requires us to run do_fetch, do_unpack,
do_patch and any tasks that the recipe has inserted inbetween, and do so
with a modified datastore primarily so that we can redirect WORKDIR and
STAMPS_DIR in order to have the files written out to a place of our
choosing and avoid stamping the tasks as having executed in a real build
context respectively. However, this all gets much more difficult when in
memres mode since we can't call internal functions such as
bb.build.exec_func() directly - instead we need to execute the tasks on
the server. To do this we use the buildFile command which already exists
for the purpose of supporting bitbake -b, and setVariable commands to
set up the appropriate datastore.
(I did look at passing the modified datastore to the buildFile command
instead of using setVar() on the main datastore, however its use of
databuilder makes that very difficult, and we'd also need a different
method of getting the changes in the datastore over to the worker as
well.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If PATCHTOOL is "git", and PATCH_COMMIT_FUNCTIONS is set to "1", for
additional tasks between do_unpack and do_patch, make a git commit. This
logic was previously implemented in devtool itself, but it makes more
sense for it to be implemented in the patch class since that's where the
rest of the logic is for this (or in lib/oe/patch.py). It also makes
it possible for this to work with tinfoil2.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use Tinfoil.parse_recipe_file() and Tinfoil.parse_recipe() instead of
the recipeutils equivalents, and replace any local duplicate
implementations. This not only tidies up the code but also allows these
calls to work in memres mode.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
setup_tinfoil() already calls prepare(), we don't need to call it again
ourselves and doing so with tinfoil2 results in "ERROR: Only one copy of
bitbake should be run against a build directory". Calling prepare()
twice should probably still be allowed, so that ought to be fixed
separately, but in the mean time this code is still wrong so fix it
here.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
To allow devtool plugins in one layer to shadow another in a well
defined way, first search BBPATH/lib/devtool directories and then
scripts/lib/devool and load only the first found.
The previous search and load loop would load all found plugins with the
ones found later replacing any found before.
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Don't worth bother with logical partition on MBR partition type (aka
msdos) if disk image generated by wic should have 4 partitions.
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Yet another instance of us expecting a string back from subprocess when
in Python 3 what you get back is bytes. Just decode the output within
run_command() so we avoid this everywhere.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In previous implementation, a UnicodeDecodeError exception will be
raised if multi-byte encoded characters are printed by the subprocess.
As an example, the following command will fail in an en_US.UTF-8
environment because wget quotes its saving destination with '‘'(0xE2
0x80 0x98), while just the first byte is provided for decoding:
devtool add recipe http://example.com/source.tar.xz
The patch fixes the issue by avoiding such kind of incomplete decoding.
Signed-off-by: Jiajie Hu <jiajie.hu@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The hello-mod recipe is unusual in that it has only local files in
SRC_URI and builds these out of ${WORKDIR}. When you use devtool modify
on it, devtool puts all of those files in an "oe-local-files"
subdirectory of the source tree, which is not ${S} (or ${B}) any more
and thus building the recipe afterwards fails. It's a bit of a hack, but
symlink the files in oe-local-files into the source tree (and commit the
symlinks with an ignored commit so that the repo is clean) to work
around the problem. We only do this at time of extraction, so any files
added to or removed from oe-local-files after that won't be handled, but
I think there's a limit to how far we should go to support these kinds
of recipes - ultimately they are anomalies.
I initially tried a hacky workaround where I set effectively set B =
"${WORKDIR}" and that allowed it to build, but other things such as the
LIC_FILES_CHKSUM checks still broke because they expected to find files
in ${S}. Another hack where I set the sourcetree to point to the
oe-local-files subdirectory works for hello-mod but not for makedevs
since whilst that is similar, unlike hello-mod it does in fact have
files in the source tree (since it has a patch that adds COPYING) and
thus the same issue occurred.
Also tweak one of the tests that tries devtool modify / update-recipe on
the makedevs recipe to try building it since that would have caught this
issue.
Fixes [YOCTO #10616].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The .deb import feature did not import postinst, postrm, preinst, or
prerm functions. This change checks to see if those files exist, and
if so, adds the appropriate functions.
[ YOCTO #10421 ]
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you have a patch remotely fetched in a recipe (e.g. from an http
server) that needs updating then add a local version and substitute the
entry in SRC_URI to point to it.
One can argue about how desirable it is to be modifying patches fetched
in this way, but then one can argue about how desirable it is to have
such patches in the recipe in the first place - and in any case if
devtool update-recipe is to correctly transfer changes to such patches
made in the git repository within the source tree to the recipe then
there isn't much choice but to do it this way.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is possible to use gzip or bzip2 to compress patches and still refer
to them in compressed form in the SRC_URI value within a recipe. If you
run "devtool modify" on such a recipe, make changes to the commit for
the patch and then run devtool update-recipe, we need to correctly
associate the commit back to the compressed patch file and re-compress
the patch, neither of which we were doing previously.
Additionally, add an oe-selftest test to ensure this doesn't regress in
future.
Fixes [YOCTO #8278].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As of the move to Python 3 and the fixes we applied at that time,
bb.process.run() will return a byte array of length 0 rather than an
empty string if the output is empty. That may be a bug that we should
fix, but for now it's easiest to just check the result here before
treating it as a string. This fixes running "devtool update-recipe" or
"devtool finish" on a recipe which has no source tree, for example
initramfs-framework.
Fixes [YOCTO #10563].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix typos in documentation of Image.add_partition() and
Image.__format_disks().
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We explicitly check for --fstype if no source was provided for a
partition. However, this was not the case for rootfs partitions. Make
sure to raise an error if filesystem was left unspecified when preparing
a rootfs partition image.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It seems that prepare_empty_partition_ext() and
prepare_empty_partition_btrfs() got broken in commit
c8669749e37fe865c197c98d5671d9de176ff4dd, thus one could observe the
following backtrace:
Backtrace:
File "<snip>/poky/scripts/lib/wic/plugins/imager/direct_plugin.py", line 93, in do_create
creator.create()
File "<snip>/poky/scripts/lib/wic/imager/baseimager.py", line 159, in create
self._create()
File "<snip>/poky/scripts/lib/wic/imager/direct.py", line 290, in _create
self.bootimg_dir, self.kernel_dir, self.native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 146, in prepare
method(rootfs, oe_builddir, native_sysroot)
File "<snip>/poky/scripts/lib/wic/partition.py", line 325, in prepare_empty_partition_ext
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
NameError: name 'rootfs_size' is not defined
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The size field of Partition class is expected to be an integer and ought
to be set inside prepare_*() method. Make sure that this is always the
case.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Root device name in systemd-bootdisk.wks is 'sda'. This can cause
images, produced using this wks to refuse booting if real device
name is not 'sda'. For example, when booting MinnowBoard MAX from
MicroSD card the boot process stucks with this message on the boot
console output: Waiting for root device /dev/sda2...
This happens because real device name of MicroSD card on this device
is mmcblk1.
Used --use-uuid option for root partition. This should make
wic to put partiion UUID instead of device name into kernel command
line.
[YOCTO #10485]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When you run devtool add on a source tree we attempt to figure out the
correct name and version for the recipe. However, despite our best
efforts, sometimes the name and/or version we come up with isn't
correct, and the only way to remedy that up until now was to reset the
recipe, delete the source tree and start again, specifying the name this
time. To avoid this slightly painful procedure, add a "rename"
subcommand that lets you rename the recipe and/or change the version.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
recipetool sets the LICENSE value based on licenses detected from the
source tree. If there are multiple licenses then they were being
separated by spaces, but this isn't actually legal formatting and if
you're using "devtool add" you get a warning printed when devtool
parses the recipe internally.
Earlier I had made a conscious decision to do it this way since it's up
to the user to figure out whether the multiple licenses should all apply
(in which case they'd be separated with &) or if there is a choice of
license (in which case | is the correct separator). However, I've come
to the conclusion that we can just default to & and then the ugly
warning goes away, and it's the safest alternative of the two (and most
likely to be correct, since it's more common to have a codebase which is
made up of code with different licenses, i.e. all of them apply to the
combined work).
I've tweaked the comment that we add to the recipe to explicitly state
that we've used & and that the user needs to change that if that's not
accurate.
Fixes [YOCTO #10413].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you run devtool finish to move a recipe created in the workspace by
devtool add or devtool upgrade to a layer, and that layer is not
currently included in bblayers.conf (perhaps unintentionally), then the
recipe will no longer be visible to bitbake. In this scenario, show a
warning so that the user isn't surprised by the recipe "going missing".
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If devtool finish is run on a recipe where the recipe file itself is in
the workspace (e.g. where devtool add / devtool upgrade has been used)
and the specified destination layer is not in bblayers.conf, then we
need to avoid running bitbake -c clean at the end because the recipe has
been moved, but the bbappend is still present in the workspace layer at
that point and so if we do it will fail due to the dangling bbappend.
It's difficult to do the clean at the point we'd want to because tinfoil
is holding bitbake.lock for most of the time, but in any case cleaning
the recipe is less important than it used to be since we started
managing the sysroot contents more strictly, so just disable cleaning
under these circumstances to avoid the problem.
Fixes [YOCTO #10484].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When running devtool add, instead of hiding the recipetool create
output, change it so that it's appropriate to show in the devtool
context and show it in real-time. This means that you get status output
such as when a URL is being fetched (though currently no progress
information.) recipetool create now has a hidden --devtool option to
enable this display mode.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Replaced running of truncate utility with the standard library
call os.ftruncate
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The new runqemu script assumes that if OECORE_NATIVE_SYSROOT is set then
it shouldn't try to run bitbake to find out the values of various
variables such as DEPLOY_DIR_IMAGE; this assumption is incorrect for the
extensible SDK. To work around this, clear OECORE_NATIVE_SYSROOT in the
environment when running runqemu.
Fixes [YOCTO #10447].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
According to UEFI specification all EFI platforms must support
GUID Partition Table(GPT) disk layout. Here is a list of advantages
of using GPT disk layout over the legacy MBR partitioning:
- Logical Block Addresses (LBAs) are 64 bits (rather than 32 bits).
- Supports many partitions (rather than just four primary partitions).
- Provides both a primary and backup partition table for redundancy.
- Uses version number and size fields for future expansion.
- Uses CRC32 fields for improved data integrity.
- Defines a GUID for uniquely identifying each partition.
- Uses a GUID and attributes to define partition content type.
- Each partition contains a 36 character human readable name.
Used GPT partitioning in all EFI kickstart files.
Tested result images on NUC, MinnowBoard MAX and MinnowBoard Turbot.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed
for any of reference BSPs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Stopped using GPT partition table in mkefidisk.wks as it's not
supported by all reference hardware.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disk identifier created by parted doesn't match the one we generated
and used in bootloader config. We need to rewrite it to make our image
bootable.
Modified involved API and data structures to access previously
generated disk identifiers after MBR is initialized. Written disk
identifiers to MBR.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added generation of partition UUIDs for MSDOS partitions.
UUID for MSDOS partitions is <disk identifier>-<partition number>,
where disk identifier is a random 4 bytes long number. It's usually
generated when MBR/partition table is initialized.
As UUID is used to point to the root partition in bootloader config
we need to generate it before the MBR is initialized.
After MBR is created we need to rewrite system identifier to match
it with what is used in bootloader config. This will be implemented
in the next commit.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sgdisk fails to set PARTUUID for msdos partitions as it's only
supported for GPT partitions.
Checked partition table format to run sgdisk --partition-guid
only for GPT partitions.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With recent changes to recipeutils, the list of local files returned
by get_recipe_local_files could possibly include source files. This
only happens when the recipe contains a SRC_URI using subdir= to put
files in the source tree. These files should be ignored when
populating the list of local files for oe-local-files directory.
[YOCTO #10326]
introduced in
OE-Core revision 9069fef5dad5a873c8a8f720f7bcbc7625556309
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Relying on that awk is installed on the target just to extract the
fourth column (i.e., the free volume size) from `df -P` is an
unnecessary dependency for devtool deploy-target. As it is already
using sed to mangle the output from `df -P`, this can easily be
modified to only extract the free volume size.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user runs devtool add on an npm:// URL (or source tree that uses
node.js), and npm is not available, just build nodejs-native instead of
telling the user they need to do it; if that fails because there isn't
any such recipe (which would be the default, since it's not in OE-Core)
then produce a slightly more readable error message hinting at what the
user needs to do.
Note that this forces the use of nodejs-native rather than npm on the
host - this makes sense for two reasons: (1) we need it to be compatible
with nodejs for the target, and (2) we have to have a recipe for that
anyway, so allowing you to avoid having a recipe for the native version
isn't really beneficial.
There's a bit of a hack in here in order to allow this - for node.js
sources that aren't fetched via npm we don't know that they are that
until we've fetched and unpacked them, by which time we're inside
recipetool and have an active tinfoil instance that will prevent bitbake
being run. To avoid this being an issue, we allow recipetool to get to
the point where we know we need npm and then exit with a specific exit
code, at which point devtool can try to build it and then if that
succeeds, it will re-execute recipetool. This is definitely not ideal,
but it can't really be refactored and done properly until we do the
tinfoil2 refactoring; in the mean time though we still want to be
helpful to the user.
Fixes [YOCTO #10337].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want to remove the -f/--fetch option at some point (as you can now
specify a URL as a positional argument instead) so display a warning
that it's deprecated if it is used.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We were supposed to be printing out the specified recipe name here but I
forgot to specify a parameter for the string.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a preparation to use mkefidisk as a default wks for
genericx86* BSPs. This change enables usage of partition UUID
instead of device name to specify root partition in kernel
command line. It should make images to boot on devices with
boot device names that differ from what's mentioned in wks file.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rename wks for systemd-boot per the suggestion from community.
Also amend description to distinguish it from others when
running "wic list images".
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This function was broken by the multi-config changes, and isn't needed anymore
now that recipeutils.pn_to_recipe can handle provides. Without this, the
newappend sub-command fails.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Preserving images for every partition doubles disk space
consumed by an image build. As those images are not used,
so it's better to remove them after assembling final image.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
