summaryrefslogtreecommitdiff
path: root/scripts/lib/wic/canned-wks
AgeCommit message (Collapse)AuthorFiles
2017-03-04wic: add more targets to directdisk syslinux configEd Bartosh1
Added 3 new targets to directdisk-bootloader-config.cfg to match hddimg syslinux config. This is a preparation for dropping hddimg in favor of wic. [YOCTO #11044] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
2017-01-16canned-wks: remove mpc8315e-rdb.wksEd Bartosh1
This file has been moved to meta-yocto-bsp/wic/ Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-16gummiboot: Remove old gummiboot recipe, related class and wks fileAlejandro Hernandez1
Since the gummiboot project is no longer being maintained and we are using systemd-boot as a replacement instead, we can now clean up all remaining gummiboot files. [YOCTO #10332] Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-12-22wic: add kickstart file for MPC8315Ed Bartosh1
Added kickstart file to produce partitioned image for MPC8315 reference hardware. [YOCTO #8719] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-11-15systemd-bootdisk.wks: use PARTUUIDEd Bartosh1
Root device name in systemd-bootdisk.wks is 'sda'. This can cause images, produced using this wks to refuse booting if real device name is not 'sda'. For example, when booting MinnowBoard MAX from MicroSD card the boot process stucks with this message on the boot console output: Waiting for root device /dev/sda2... This happens because real device name of MicroSD card on this device is mmcblk1. Used --use-uuid option for root partition. This should make wic to put partiion UUID instead of device name into kernel command line. [YOCTO #10485] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-11canned-wks: use GPT partition tableEd Bartosh3
According to UEFI specification all EFI platforms must support GUID Partition Table(GPT) disk layout. Here is a list of advantages of using GPT disk layout over the legacy MBR partitioning: - Logical Block Addresses (LBAs) are 64 bits (rather than 32 bits). - Supports many partitions (rather than just four primary partitions). - Provides both a primary and backup partition table for redundancy. - Uses version number and size fields for future expansion. - Uses CRC32 fields for improved data integrity. - Defines a GUID for uniquely identifying each partition. - Uses a GUID and attributes to define partition content type. - Each partition contains a 36 character human readable name. Used GPT partitioning in all EFI kickstart files. Tested result images on NUC, MinnowBoard MAX and MinnowBoard Turbot. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-11systemd-bootdisk.wks: update kernel command lineEd Bartosh1
Used ttyS0 console. Removed usage of ttyPCH0 (FRI2 leftover) Decreased bootloader timeout to 5 seconds Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed for any of reference BSPs. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-09mkgummidisk.wks: update kernel command lineEd Bartosh1
Used ttyS0 console. Removed usage of ttyPCH0 (FRI2 leftover) Decreased bootloader timeout to 5 seconds Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed for any of reference BSPs. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-07mkefidisk.wks: update kernel command lineEd Bartosh1
Used ttyS0 console. Removed usage of ttyPCH0 (FRI2 leftover) Decreased bootloader timeout to 5 seconds Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed for any of reference BSPs. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-07mkefidisk.wks: use MSDOS partition tableEd Bartosh1
Stopped using GPT partition table in mkefidisk.wks as it's not supported by all reference hardware. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30mkefidisk.wks: use partition UUID and GPT partition tableEd Bartosh1
This is a preparation to use mkefidisk as a default wks for genericx86* BSPs. This change enables usage of partition UUID instead of device name to specify root partition in kernel command line. It should make images to boot on devices with boot device names that differ from what's mentioned in wks file. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30wic: rename and amend systemd-boot wks fileJianxun Zhang1
Rename wks for systemd-boot per the suggestion from community. Also amend description to distinguish it from others when running "wic list images". Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-22directdisk*.wks: add serial console supportEd Bartosh3
Added serial console to kernel command line to to make it easier to boot wic images on devices without display. Tested on MinnowBoard MAX. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20wic: clone gummiboot wks for systemd-bootJianxun Zhang1
This wks is just a copy of gummiboot wks with bootloader changed to systemd-boot. A very basic boot test on a X86 target is done with a direct-boot image generated by: wic create mksystemd-bootdisk -e core-image-minimal Because we plan to replace gummiboot with systemd-boot at any time in the future, we summarize history (as much as I can) of the current gummiboot wks before it's gone: ----------------------------------------------------------------- commit 7d4bb40905fab38fb3db1d0e17afbc803622f00c Author: Ed Bartosh <ed.bartosh@linux.intel.com> Date: Wed Sep 2 13:58:02 2015 +0300 wic: get rid of scripts/lib/image Moved content of scripts/lib/image/ to scripts/lib/wic as one directory with the same name as a tool is self-explanatory and less confusing than two. (From OE-Core rev: 5dc02d572794298b3362378cea3d7da654456c44) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> commit 77561e719181d58289687373eebadce764f838a7 Author: Ed Bartosh <ed.bartosh@linux.intel.com> Date: Wed Sep 2 13:58:01 2015 +0300 wic: use ext4 in canned .wks files Latest kernel doesn't have ext3 compiled in. Wic images produced from canned .wks can't boot because of that. Switching to ext4 fixes this issue. (From OE-Core rev: d281a65a81f369fc8d75023b8f911ce4106969c1) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> commit 072657ce98414afdd6f68941847e21fc5ce496c7 Author: Tom Zanussi <tom.zanussi@linux.intel.com> Date: Mon Aug 11 20:35:41 2014 -0500 wic: Add mkgummidisk kickstart file This is the same as mkefidisk but uses gummiboot instead of grub-efi. (From OE-Core rev: 5979409ebfab0bb07b3c2b2fcf14a722c441f07b) Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> ----------------------------------------------------------------- Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-19wic: move parts of canned .wks into common.wks.incEd Bartosh4
In order to give and example of 'include' feature of ks parser and for testing purposes common parts of 3 canned wks files were moved into common.wks.inc Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-12-09directdisk-bootloader-config.wks: Add example for custom bootloader configMariano Lopez2
Add new wks file as a example for a custom bootloader configuration. This change also includes the configuration that file that will be used. This example is using syslinux with MBR, the configuration file is almost the same as the one generated by wic. As stated before this is just an example. [YOCTO #8728] Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-02wic: get rid of scripts/lib/imageEd Bartosh8
Moved content of scripts/lib/image/ to scripts/lib/wic as one directory with the same name as a tool is self-explanatory and less confusing than two. Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-13 04:17:12 +0000