| Age | Commit message (Collapse) | Author | Files |
|---|
|
* Clone the correct path - we need .git on the end
* Pull from the specified path instead of expecting a remote to be set
* up in the repo already (it isn't by default)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We read the updateserver setting from the config file but we never
actually used that value - the code then went on to use only the value
supplied on the command line.
Fix courtesy of Dmitry Rozhkov <dmitry.rozhkov@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Copied layers with 'cp -a' instead of calling shutil.copytree as
copytree fails to copy broken symlinks.
More pythonic fix would be to use copytree with 'ignore' parameter,
but this could slow down copying complex directory structures.
[YOCTO #8825]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Much of this was copy/pasted from the extract subcommand code; make it
specific to sync.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We deliberately leave the source tree alone when resetting in case it
contains any work in progress belonging to the user; tell them that
we're doing this so they aren't surprised about it still existing later
on.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a recipe in the workspace actually exists as a file within the
workspace (e.g. after doing "devtool add" or "devtool upgrade") then
show the path to the recipe file on the status line for the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As per the changes to "devtool add", make the source tree path optional
and use the default path if none is specified.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Having to specify -f is a little bit ugly when a URI is distinctive
enough to recognise amongst the other positional parameters, so take it
as an optional positional parameter. -f/--fetch is still supported, but
deprecated.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
recipetool create now has all the logic in it for auto-detecting the
name and version, and using those in the file name - so we can make the
name an optional parameter for devtool add and we pick up the file name
that recipetool has used after the fact.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Assuming we're fetching source remotely (from a URI) we can default the
source tree that will be extracted from it to a "sources" directory
under the workspace in order to save the user specifying it if they
don't have a preferred location.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bbappend already exists at this point, so we know what its path is -
there's no need to figure it out from scratch here.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're repeating this in a couple of places, so we might as well have a
function to do it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a few clarifying words.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add an "edit-recipe" subcommand that runs your default editor (as
specified by the EDITOR environment variable) on the specified recipe in
the workspace. Note that by default the recipe file itself must be in
the workspace - i.e. as a result of "devtool add" or "devtool upgrade";
however there is a -a/--any-recipe option to override this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the SDK update server hasn't been set in the config (when building
the extensible SDK this would be set via SDK_UPDATE_URL) and it wasn't
specified on the command line then we were failing with a traceback
because we didn't pass the default value properly - None is interpreted
as no default, meaning raise an exception if no such option exists.
Additionally we don't need the try...except anymore either because with
a proper default value, NoSectionError is caught as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add 'do_kernel_configme' and 'do_kernel_configcheck' to
SRCTREECOVEREDTASKS of kernel packages. These tasks should not be run
because kernel meta in the srctree is not necessarily up-to-date or
even present which causes build failures and/or invalid kernel config.
Especially so because 'do_patch' which is a dependency of
'do_kernel_configme' is not being run.
We now store .config in the srctree and 'do_configure' task is able to
run successfully.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This makes the correct kernel config to be used when building kernel
from srctree (extrernalsrc). If no kernel config is present in the
builddir 'do_configure' task copies .config from the srctree.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use bb.utils.edit_metadata() to replace some of the logic in this
function; this avoids us effectively having two implementations of the
same thing. In the process fix the following issues:
* Insert values before any leading comments for the next variable
instead of after them
* Insert overridden variables (e.g. RDEPENDS_${PN}) in the correct place
* Properly handle replacing varflag settings (e.g. SRC_URI[md5sum])
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Make some minor clarifications to help text
* Drop ArgumentDefaultsHelpFormatter and just put the defaults in the
text itself where needed (because otherwise you get defaults shown for
store_true options which is somewhat confusing).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Enable access to the configuration object in register_commands() so that
we can read configuration values there; this allows us to show the
task that will be run in the command line help for the build subcommand.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use a bbappend file to set PARALLEL_MAKE instead of a postfile; this
is a bit neater and only affects the specified recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is just belt-and-braces but we ought to use try..finally in this
kind of situation, so just do it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Print the SUMMARY value for each matched item assuming it's not the
default.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This function is no longer required to be defined for a plugin, so drop
it where it's a no-op.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rather than reconstructing the output path for packages, use the proper
variable.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For subcommands that don't actually involve the workspace, don't
auto-create the workspace.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you're upgrading a git recipe to a revision on a release branch
that's different to the branch for the current revision, then you'll
need to update the branch parameter in SRC_URI, so add a --srcbranch/-B
command-line parameter to let you do that easily. It handles both when
the branch is stated verbatim in the recipe, and when a reference to
another variable is used (a common convention is to use a SRCBRANCH
variable for this, though the code doesn't care what variable is used
if any).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If we're upgrading a recipe that fetches from git, and we've simply
fetched a tarball of the repo instead of directly from the upstream repo
(this can happen if you have PREMIRRORS set up as in poky with a core recipe,
e.g. kernelshark) then we won't have any new revisions, and the checkout
will fail with "fatal: reference is not a tree: <hash>". To avoid this,
do a "git fetch" before checking out the new revision.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If we're upgrading a git recipe the recipe file usually won't need
renaming; for some unknown reason we were throwing an error here which
isn't correct.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This code was clearly never tested. Fix the following issues:
* Actually set SRCREV if it's been specified
* Enable history tracking and reparse so that we handle if variables are
set in an inc file next to the recipe
* Use a more accurate check for PV being in the recipe which will work
if it's in an inc file next to the recipe
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you did a "devtool add" followed by "devtool upgrade" and then did
a "devtool reset" on the recipe you upgraded, the first recipe would
also be deleted from the workspace - this was because we were
erroneously adding the entire "recipes" subdirectory and its contents to
be tracked for removal on reset. Remove the unnecessary call to
os.path.dirname() that caused this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The external source of kernel has been patched during the
construction of git repository. Include the do_patch task in the
SRCTREECOVEREDTASKS.
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The sync command is similar to the extract command, except it
fetches the sync'ed and patched branch to an existing git repository.
This enables users to keep track the upstream development while
maintaining their own local git repository at the same time.
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For modify / extract / upgrade, if the specified "recipe" is not
actually a recipe but a virtual target such as virtual/kernel, map it
correctly to the actual recipe and make sure we use that name within the
workspace. Thanks to Chris Larson for reminding me this was still broken
and for a hint on how to fix it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If recipe parsing fails we need to exit out instead of attempting to use
the data object that's set to None, which resulted in a traceback.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use "git cherry" against the original tag that we made when we extracted
the source in order to find the revisions that are definitely new. This
allows you to modify a commit in the middle of the series and then run
devtool update-recipe and not have the subsequent patches unnecessarily
modified.
Fixes [YOCTO #8388].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The name of the directory for local source files under srctree is
'oe-local-files', not 'local-files'. Fixes a bug that slipped through
in b7ab82485e4514e07ab8a76e554da27ddc92e6c0.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable variable history tracking so that the variables are updated in
the correct file - i.e. in the file they are already defined.
[YOCTO #7715]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change makes it possible to have local files (non-remote SRC_URI
files, i.e. files that are located in the "recipe space") under the
srctree even if S!=WORKDIR. The files must be placed under the
'local-files' subdirectory.
Complements the previous patch that imports local files into srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Helper function for replacing a pattern like:
target_dir = os.path.dirname(target)
bb.utils.mkdirhier(target_dir)
shutil.move(source, target)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Implement new function that handles patch file generation. The new
function also does the discovery of new, updated and deleted patches.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
When adding multiple new patches append them to SRC_URI in correct order
so that they apply correctly.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Rename fails over filesystem boundaries.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We only need the base configuration to get the variable values we want
to get here, there's no need to parse recipes / load the cache.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not change change current working directory permanently, but, only
for the duration of tinfoil initialization instead. The previous fix
caused very unintuitive behavior where using relative paths were solved
with respect to the builddir instead of the current working directory.
E.g. calling "devtool extract zlib ./zlib" would always create create
srctree in ${TOPDIR}/zlib, independent of the users cwd.
(From OE-Core rev: 4c7f159b0e17a0475a4a4e9dc4dd012e3d2e6a1f)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a subcommand to search to find the target recipe name providing
some file or capability. This is implemented by searching on recipe
name, package name, description, package contents (file names), and
runtime file provides. For example:
$ devtool search libGL
mesa
$ devtool search X11
xextproto
libxxf86vm
xf86driproto
xf86vidmodeproto
libxfixes
xproto
libx11
...
$ devtool search /bin/sed
busybox
sed
This is particularly useful within the extensible SDK but is also made
available in devtool alongside the build system.
Note of course that because this searches pkgdata, useful results depend
upon do_packagedata(_setscene) having executed for the recipe being
searched for.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We ship the runqemu script and if we build QEMU itself within the
extensible SDK, then it would be nice to be able to run it. This is a
very thin wrapper around runqemu, supplying the machine and image name
so the user doesn't need to. (This subcommand is only available within
the extensible SDK since it only really makes sense there where it is
otherwise hard to run runqemu directly.)
Implements [YOCTO #6657].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a means of creating recipes for package files or archives that
contain a directory structure to be installed verbatim, for example an
rpm file. (We mostly just re-use bin_package here and skip some of the
normal build system checks.) This support is available in "recipetool
create" and "devtool add" which wraps the former.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upon further reflection, it seems to me that this bbappend ought to just
be deleted at the end of the build. This keeps things simple; you never
have to remember to delete any files to get back to where you were
before with the image. This means we can also drop the slightly awkward
message reminding the user how to do that. I've also updated the test to
look at the image manifest to determine if the command has worked
instead of looking for the (now deleted) bbappend.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
