| Age | Commit message (Collapse) | Author | Files |
|---|
|
Add a few clarifying words.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add an "edit-recipe" subcommand that runs your default editor (as
specified by the EDITOR environment variable) on the specified recipe in
the workspace. Note that by default the recipe file itself must be in
the workspace - i.e. as a result of "devtool add" or "devtool upgrade";
however there is a -a/--any-recipe option to override this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add 'do_kernel_configme' and 'do_kernel_configcheck' to
SRCTREECOVEREDTASKS of kernel packages. These tasks should not be run
because kernel meta in the srctree is not necessarily up-to-date or
even present which causes build failures and/or invalid kernel config.
Especially so because 'do_patch' which is a dependency of
'do_kernel_configme' is not being run.
We now store .config in the srctree and 'do_configure' task is able to
run successfully.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This makes the correct kernel config to be used when building kernel
from srctree (extrernalsrc). If no kernel config is present in the
builddir 'do_configure' task copies .config from the srctree.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Make some minor clarifications to help text
* Drop ArgumentDefaultsHelpFormatter and just put the defaults in the
text itself where needed (because otherwise you get defaults shown for
store_true options which is somewhat confusing).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For subcommands that don't actually involve the workspace, don't
auto-create the workspace.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you did a "devtool add" followed by "devtool upgrade" and then did
a "devtool reset" on the recipe you upgraded, the first recipe would
also be deleted from the workspace - this was because we were
erroneously adding the entire "recipes" subdirectory and its contents to
be tracked for removal on reset. Remove the unnecessary call to
os.path.dirname() that caused this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The external source of kernel has been patched during the
construction of git repository. Include the do_patch task in the
SRCTREECOVEREDTASKS.
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The sync command is similar to the extract command, except it
fetches the sync'ed and patched branch to an existing git repository.
This enables users to keep track the upstream development while
maintaining their own local git repository at the same time.
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For modify / extract / upgrade, if the specified "recipe" is not
actually a recipe but a virtual target such as virtual/kernel, map it
correctly to the actual recipe and make sure we use that name within the
workspace. Thanks to Chris Larson for reminding me this was still broken
and for a hint on how to fix it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If recipe parsing fails we need to exit out instead of attempting to use
the data object that's set to None, which resulted in a traceback.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use "git cherry" against the original tag that we made when we extracted
the source in order to find the revisions that are definitely new. This
allows you to modify a commit in the middle of the series and then run
devtool update-recipe and not have the subsequent patches unnecessarily
modified.
Fixes [YOCTO #8388].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The name of the directory for local source files under srctree is
'oe-local-files', not 'local-files'. Fixes a bug that slipped through
in b7ab82485e4514e07ab8a76e554da27ddc92e6c0.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable variable history tracking so that the variables are updated in
the correct file - i.e. in the file they are already defined.
[YOCTO #7715]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change makes it possible to have local files (non-remote SRC_URI
files, i.e. files that are located in the "recipe space") under the
srctree even if S!=WORKDIR. The files must be placed under the
'local-files' subdirectory.
Complements the previous patch that imports local files into srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Helper function for replacing a pattern like:
target_dir = os.path.dirname(target)
bb.utils.mkdirhier(target_dir)
shutil.move(source, target)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Implement new function that handles patch file generation. The new
function also does the discovery of new, updated and deleted patches.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
When adding multiple new patches append them to SRC_URI in correct order
so that they apply correctly.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Do not change change current working directory permanently, but, only
for the duration of tinfoil initialization instead. The previous fix
caused very unintuitive behavior where using relative paths were solved
with respect to the builddir instead of the current working directory.
E.g. calling "devtool extract zlib ./zlib" would always create create
srctree in ${TOPDIR}/zlib, independent of the users cwd.
(From OE-Core rev: 4c7f159b0e17a0475a4a4e9dc4dd012e3d2e6a1f)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a means of creating recipes for package files or archives that
contain a directory structure to be installed verbatim, for example an
rpm file. (We mostly just re-use bin_package here and skip some of the
normal build system checks.) This support is available in "recipetool
create" and "devtool add" which wraps the former.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we end up printing a message about the build directory being the same
as the source, we should print that first and then print the message
about the recipe file possibly needing to be edited to the end so that
it has slightly more impact.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the fetched source isn't already a git repository, initialise it as
one and then branch and tag, just as we do with "devtool modify". This
makes it easier to make changes, commit them and then use the
"devtool update-recipe" command to turn those commits into patches
on the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some recipes don't extract any source (for example, opkg-keyrings). We
were producing a traceback in this case because we weren't checking if
the directory existed.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recipes that use work-shared (such as libgcc) are capable of unpacking
the source, but it doesn't necessarily unpack to ${WORKDIR}/${BP}. Use
the last part of the actual S value instead which is more likely to
work.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
unpack task
If you try to use "devtool modify -x" or "devtool extract" on a recipe
where do_unpack has been set as noexec (e.g. glibc-locale), then we get
an error because the expected source wasn't ever unpacked. Do a check up
front for noexec being set on do_unpack and error out with a reasonable
message if that's the case.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we were adding a recipe for software that would typically be built
in the same directory as the source, we were always using a separate
build directory unless the user explicitly specified not to, leading to
errors for software that doesn't expect to be built that way (such as
Python modules using distutils). Split out the code that makes this
determination automatically from the "devtool modify" and "devtool
upgrade" code and re-use that here so the behaviour is consistent.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes, particularly if you extracted the source to /tmp which is on
tmpfs, the external source tree that is being pointed to may no longer
exist when you come to run "devtool build" or "devtool update-recipe"
etc. Make all of the commands that need to check for a recipe being in
the workspace call a single function and have that function additionally
check the source tree still exists where appropriate.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use already existing bb.fetch.decodeurl() for getting the parameters for
a URI. This is more fault tolerant and maintainable.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So far all devtool and recipetool plugins were expected
to have plugin_init function. This function is empty in
most of plugins as they don't require initialisation.
Making plugin_init optional would allow not having empty
plugin_init in every plugin.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a recipe has been added to the workspace via "devtool add"
or "devtool upgrade" then the recipe file itself will be in the
workspace layer; if you run "devtool update-recipe" particularly in the
upgrade case you might think it would apply the upgrade to the original
recipe, but it will not - in order to remain consistent it has to update
the recipe that's in use which is the one in the workspace. Warn the
user in this situation so that they know what they need to do when they
are finished.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enhance the logic behind the 'auto' mode a bit by only updating the
SRCREV if the changes are already found upstream. The logic is simple:
update SRCREV only if the current local HEAD commit is found in the
remote branch (i.e. 'origin/<branch_name>'). Otherwise resort to
patching.
This affects a couple of the oe-selftest tests so update those as well.
[YOCTO #7907]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intention is to have a single file for each devtool feature
so devtool can grow in a modular way. In this direction, this patch creates
build.py, moving all related build features from standard.py to build.py.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrades a recipe to a particular version and downloads the source code
into a folder. User can avoid patching the source code.
These are the general steps of the upgrade function:
- Extract current recipe source code into srctree and create a branch
- Extract upgrade recipe source code into srctree and rebase with
previous branch. In case the rebase is not correctly applied, source
code will not be deleted, so user correct the patches
- Creates the new recipe under the workspace
[YOCTO #7642]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the _add_md5() function to be called with a directory in order to
recursively add the files under it. Additionally, we need to skip
preserving empty directories (since directories aren't listed in the md5
file).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not put 'do_shared_workdir' into SRCTREECOVEREDTASKS when creating
bbappend for kernel packages. This will allow building packages that
depend on the shared build artifacts of kernel.
[YOCTO #6658]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The kernel package needs "kern-tools-native" in order for it's
do_kernel_metadata. Thus, devtool extract for kernel in a pristine
environment fails. With the current bb.tinfoil implementation it is not
possible to run arbitrary bitbake commands - e.g. run
"bitbake kern-tools-native -c populate_sysroot" in our case. This patch
implements an ugly workaround for that problem, basically by hardcoding
this dependency and running the required bitbake task(s) before tinfoil
is initialized.
[YOCTO #6658]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Change handling of kernel packages so that the "initial rev" is parsed
correctly. Also, the devtool-specific git tags (devtool-base and
devtoo-patched) are now generated for kernel packages as well.
[YOCTO #6658]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Set SRCTREECOVEREDTASKS appropriately in the workspace .bbappend file
for kernel recipes. This tries to ensure that all needed tasks (esp.
configure and patch) are run when building the kernel - tasks which
would normally be disabled by externalsrc.bbclass.
[YOCTO #6658]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
This reverts commit 69c63728dae38d5b1cc9874268f235a07e04d3db.
Moved add_md5 back to standard.py as it's not used in
any plugin anymore.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Moved standard.py:_parse_recipe -> __init__.py:parse_recipe and
standard.py:_get_recipe_file -> __init__.py:get_recipe_file
to be able to call them from other modules.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Moved _add_md5 function from standard.py to __init__.py to
be able to call it from other modules.
(From OE-Core rev: ee38bb20dc7ba21dac782d8d13383f81dfedef55)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Let's have the caller do this and then the function is a bit more
flexible (e.g. we can choose to parse with bbappends or not); fix up
calls to this function appropriately (of which there are only two, both
within devtool).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a recipe is BBCLASSEXTENDed (e.g. to -native), its PN value and the
name of the bbappend will be different; we were assuming them to be the
same when reading in the workspace, leading to us seeing the base recipe
name everywhere afterwards.
Also add a test so we ensure this doesn't regress in future.
Fixes [YOCTO #8157].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Ensure that the "patches" subdirectory is removed from the right
location when S == WORKDIR (e.g. devtool extract makedevs).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In case the user has set up externalsrc outside of devtool, force
EXTERNALSRC to blank for the recipe when extracting so that the original
source URI is still in SRC_URI and we're still able to extract it. (This
isn't a problem with devtool itself because the bbappends within the
workspace layer that apply externalsrc are explicitly filtered out when
devtool parses a recipe).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If patches fail to apply with git, quilt it used as a fallback. If that
happens, the code in this class is meant to handle cleanup of these patch
files. In the case where ${S} is a subdir of the git tree, the code doesn't
correctly set the patches directory.
This change correctly sets the patches directory (which is different to the
location of the git repository).
[YOCTO #7911]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use DevtoolError exception more widely for handling error cases. This
exception is now caught in the main script and raising it can be used to
exit with an error. This hopefully simplifies error handling. The
change also makes exit codes more consistent, always returning '1' when
an error occurs.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
